diff options
Diffstat (limited to 'drivers')
31 files changed, 751 insertions, 389 deletions
diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig index b401dadad4a8..eb140ff38c27 100644 --- a/drivers/dma/Kconfig +++ b/drivers/dma/Kconfig @@ -54,7 +54,7 @@ config DW_DMAC config AT_HDMAC tristate "Atmel AHB DMA support" - depends on ARCH_AT91SAM9RL + depends on ARCH_AT91SAM9RL || ARCH_AT91SAM9G45 select DMA_ENGINE help Support the Atmel AHB DMA controller. This can be integrated in diff --git a/drivers/leds/leds-locomo.c b/drivers/leds/leds-locomo.c index 5d91362e3066..1f7c10f6b7f2 100644 --- a/drivers/leds/leds-locomo.c +++ b/drivers/leds/leds-locomo.c @@ -44,7 +44,7 @@ static void locomoled_brightness_set1(struct led_classdev *led_cdev, static struct led_classdev locomo_led0 = { .name = "locomo:amber:charge", - .default_trigger = "sharpsl-charge", + .default_trigger = "main-battery-charging", .brightness_set = locomoled_brightness_set0, }; diff --git a/drivers/mfd/mcp-core.c b/drivers/mfd/mcp-core.c index 57271cb3b316..84815f9ef636 100644 --- a/drivers/mfd/mcp-core.c +++ b/drivers/mfd/mcp-core.c @@ -17,11 +17,11 @@ #include <linux/device.h> #include <linux/slab.h> #include <linux/string.h> +#include <linux/mfd/mcp.h> #include <mach/dma.h> #include <asm/system.h> -#include "mcp.h" #define to_mcp(d) container_of(d, struct mcp, attached_device) #define to_mcp_driver(d) container_of(d, struct mcp_driver, drv) diff --git a/drivers/mfd/mcp-sa11x0.c b/drivers/mfd/mcp-sa11x0.c index 62b32dabf629..258427232728 100644 --- a/drivers/mfd/mcp-sa11x0.c +++ b/drivers/mfd/mcp-sa11x0.c @@ -19,6 +19,7 @@ #include <linux/spinlock.h> #include <linux/slab.h> #include <linux/platform_device.h> +#include <linux/mfd/mcp.h> #include <mach/dma.h> #include <mach/hardware.h> @@ -28,7 +29,6 @@ #include <mach/assabet.h> -#include "mcp.h" struct mcp_sa11x0 { u32 mccr0; @@ -163,6 +163,7 @@ static int mcp_sa11x0_probe(struct platform_device *pdev) mcp->dma_audio_wr = DMA_Ser4MCP0Wr; mcp->dma_telco_rd = DMA_Ser4MCP1Rd; mcp->dma_telco_wr = DMA_Ser4MCP1Wr; + mcp->gpio_base = data->gpio_base; platform_set_drvdata(pdev, mcp); diff --git a/drivers/mfd/mcp.h b/drivers/mfd/mcp.h deleted file mode 100644 index c093a93b8808..000000000000 --- a/drivers/mfd/mcp.h +++ /dev/null @@ -1,66 +0,0 @@ -/* - * linux/drivers/mfd/mcp.h - * - * Copyright (C) 2001 Russell King, All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License. - */ -#ifndef MCP_H -#define MCP_H - -struct mcp_ops; - -struct mcp { - struct module *owner; - struct mcp_ops *ops; - spinlock_t lock; - int use_count; - unsigned int sclk_rate; - unsigned int rw_timeout; - dma_device_t dma_audio_rd; - dma_device_t dma_audio_wr; - dma_device_t dma_telco_rd; - dma_device_t dma_telco_wr; - struct device attached_device; -}; - -struct mcp_ops { - void (*set_telecom_divisor)(struct mcp *, unsigned int); - void (*set_audio_divisor)(struct mcp *, unsigned int); - void (*reg_write)(struct mcp *, unsigned int, unsigned int); - unsigned int (*reg_read)(struct mcp *, unsigned int); - void (*enable)(struct mcp *); - void (*disable)(struct mcp *); -}; - -void mcp_set_telecom_divisor(struct mcp *, unsigned int); -void mcp_set_audio_divisor(struct mcp *, unsigned int); -void mcp_reg_write(struct mcp *, unsigned int, unsigned int); -unsigned int mcp_reg_read(struct mcp *, unsigned int); -void mcp_enable(struct mcp *); -void mcp_disable(struct mcp *); -#define mcp_get_sclk_rate(mcp) ((mcp)->sclk_rate) - -struct mcp *mcp_host_alloc(struct device *, size_t); -int mcp_host_register(struct mcp *); -void mcp_host_unregister(struct mcp *); - -struct mcp_driver { - struct device_driver drv; - int (*probe)(struct mcp *); - void (*remove)(struct mcp *); - int (*suspend)(struct mcp *, pm_message_t); - int (*resume)(struct mcp *); -}; - -int mcp_driver_register(struct mcp_driver *); -void mcp_driver_unregister(struct mcp_driver *); - -#define mcp_get_drvdata(mcp) dev_get_drvdata(&(mcp)->attached_device) -#define mcp_set_drvdata(mcp,d) dev_set_drvdata(&(mcp)->attached_device, d) - -#define mcp_priv(mcp) ((void *)((mcp)+1)) - -#endif diff --git a/drivers/mfd/ucb1x00-assabet.c b/drivers/mfd/ucb1x00-assabet.c index 86fed4870f93..cea9da60850d 100644 --- a/drivers/mfd/ucb1x00-assabet.c +++ b/drivers/mfd/ucb1x00-assabet.c @@ -14,10 +14,10 @@ #include <linux/fs.h> #include <linux/proc_fs.h> #include <linux/device.h> +#include <linux/mfd/ucb1x00.h> #include <mach/dma.h> -#include "ucb1x00.h" #define UCB1X00_ATTR(name,input)\ static ssize_t name##_show(struct device *dev, struct device_attribute *attr, \ diff --git a/drivers/mfd/ucb1x00-core.c b/drivers/mfd/ucb1x00-core.c index 60c3988f3cf3..252b74188ec2 100644 --- a/drivers/mfd/ucb1x00-core.c +++ b/drivers/mfd/ucb1x00-core.c @@ -25,12 +25,12 @@ #include <linux/interrupt.h> #include <linux/device.h> #include <linux/mutex.h> +#include <linux/mfd/ucb1x00.h> +#include <linux/gpio.h> #include <mach/dma.h> #include <mach/hardware.h> -#include "ucb1x00.h" - static DEFINE_MUTEX(ucb1x00_mutex); static LIST_HEAD(ucb1x00_drivers); static LIST_HEAD(ucb1x00_devices); @@ -108,6 +108,60 @@ unsigned int ucb1x00_io_read(struct ucb1x00 *ucb) return ucb1x00_reg_read(ucb, UCB_IO_DATA); } +static void ucb1x00_gpio_set(struct gpio_chip *chip, unsigned offset, int value) +{ + struct ucb1x00 *ucb = container_of(chip, struct ucb1x00, gpio); + unsigned long flags; + + spin_lock_irqsave(&ucb->io_lock, flags); + if (value) + ucb->io_out |= 1 << offset; + else + ucb->io_out &= ~(1 << offset); + + ucb1x00_reg_write(ucb, UCB_IO_DATA, ucb->io_out); + spin_unlock_irqrestore(&ucb->io_lock, flags); +} + +static int ucb1x00_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + struct ucb1x00 *ucb = container_of(chip, struct ucb1x00, gpio); + return ucb1x00_reg_read(ucb, UCB_IO_DATA) & (1 << offset); +} + +static int ucb1x00_gpio_direction_input(struct gpio_chip *chip, unsigned offset) +{ + struct ucb1x00 *ucb = container_of(chip, struct ucb1x00, gpio); + unsigned long flags; + + spin_lock_irqsave(&ucb->io_lock, flags); + ucb->io_dir &= ~(1 << offset); + ucb1x00_reg_write(ucb, UCB_IO_DIR, ucb->io_dir); + spin_unlock_irqrestore(&ucb->io_lock, flags); + + return 0; +} + +static int ucb1x00_gpio_direction_output(struct gpio_chip *chip, unsigned offset + , int value) +{ + struct ucb1x00 *ucb = container_of(chip, struct ucb1x00, gpio); + unsigned long flags; + + spin_lock_irqsave(&ucb->io_lock, flags); + ucb->io_dir |= (1 << offset); + ucb1x00_reg_write(ucb, UCB_IO_DIR, ucb->io_dir); + + if (value) + ucb->io_out |= 1 << offset; + else + ucb->io_out &= ~(1 << offset); + ucb1x00_reg_write(ucb, UCB_IO_DATA, ucb->io_out); + spin_unlock_irqrestore(&ucb->io_lock, flags); + + return 0; +} + /* * UCB1300 data sheet says we must: * 1. enable ADC => 5us (including reference startup time) @@ -476,6 +530,7 @@ static int ucb1x00_probe(struct mcp *mcp) struct ucb1x00_driver *drv; unsigned int id; int ret = -ENODEV; + int temp; mcp_enable(mcp); id = mcp_reg_read(mcp, UCB_ID); @@ -508,12 +563,27 @@ static int ucb1x00_probe(struct mcp *mcp) goto err_free; } + ucb->gpio.base = -1; + if (mcp->gpio_base != 0) { + ucb->gpio.label = dev_name(&ucb->dev); + ucb->gpio.base = mcp->gpio_base; + ucb->gpio.ngpio = 10; + ucb->gpio.set = ucb1x00_gpio_set; + ucb->gpio.get = ucb1x00_gpio_get; + ucb->gpio.direction_input = ucb1x00_gpio_direction_input; + ucb->gpio.direction_output = ucb1x00_gpio_direction_output; + ret = gpiochip_add(&ucb->gpio); + if (ret) + goto err_free; + } else + dev_info(&ucb->dev, "gpio_base not set so no gpiolib support"); + ret = request_irq(ucb->irq, ucb1x00_irq, IRQF_TRIGGER_RISING, "UCB1x00", ucb); if (ret) { printk(KERN_ERR "ucb1x00: unable to grab irq%d: %d\n", ucb->irq, ret); - goto err_free; + goto err_gpio; } mcp_set_drvdata(mcp, ucb); @@ -522,6 +592,7 @@ static int ucb1x00_probe(struct mcp *mcp) if (ret) goto err_irq; + INIT_LIST_HEAD(&ucb->devs); mutex_lock(&ucb1x00_mutex); list_add(&ucb->node, &ucb1x00_devices); @@ -529,10 +600,14 @@ static int ucb1x00_probe(struct mcp *mcp) ucb1x00_add_dev(ucb, drv); } mutex_unlock(&ucb1x00_mutex); + goto out; err_irq: free_irq(ucb->irq, ucb); + err_gpio: + if (ucb->gpio.base != -1) + temp = gpiochip_remove(&ucb->gpio); err_free: kfree(ucb); err_disable: @@ -545,6 +620,7 @@ static void ucb1x00_remove(struct mcp *mcp) { struct ucb1x00 *ucb = mcp_get_drvdata(mcp); struct list_head *l, *n; + int ret; mutex_lock(&ucb1x00_mutex); list_del(&ucb->node); @@ -554,6 +630,12 @@ static void ucb1x00_remove(struct mcp *mcp) } mutex_unlock(&ucb1x00_mutex); + if (ucb->gpio.base != -1) { + ret = gpiochip_remove(&ucb->gpio); + if (ret) + dev_err(&ucb->dev, "Can't remove gpio chip: %d\n", ret); + } + free_irq(ucb->irq, ucb); device_unregister(&ucb->dev); } @@ -604,6 +686,7 @@ static int ucb1x00_resume(struct mcp *mcp) struct ucb1x00 *ucb = mcp_get_drvdata(mcp); struct ucb1x00_dev *dev; + ucb1x00_reg_write(ucb, UCB_IO_DIR, ucb->io_dir); mutex_lock(&ucb1x00_mutex); list_for_each_entry(dev, &ucb->devs, dev_node) { if (dev->drv->resume) diff --git a/drivers/mfd/ucb1x00-ts.c b/drivers/mfd/ucb1x00-ts.c index 61b7d3eb9a2f..000cb414a78a 100644 --- a/drivers/mfd/ucb1x00-ts.c +++ b/drivers/mfd/ucb1x00-ts.c @@ -30,12 +30,12 @@ #include <linux/freezer.h> #include <linux/slab.h> #include <linux/kthread.h> +#include <linux/mfd/ucb1x00.h> #include <mach/dma.h> #include <mach/collie.h> #include <asm/mach-types.h> -#include "ucb1x00.h" struct ucb1x00_ts { diff --git a/drivers/mfd/ucb1x00.h b/drivers/mfd/ucb1x00.h deleted file mode 100644 index a8ad8a0ed5db..000000000000 --- a/drivers/mfd/ucb1x00.h +++ /dev/null @@ -1,255 +0,0 @@ -/* - * linux/drivers/mfd/ucb1x00.h - * - * Copyright (C) 2001 Russell King, All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License. - */ -#ifndef UCB1200_H -#define UCB1200_H - -#define UCB_IO_DATA 0x00 -#define UCB_IO_DIR 0x01 - -#define UCB_IO_0 (1 << 0) -#define UCB_IO_1 (1 << 1) -#define UCB_IO_2 (1 << 2) -#define UCB_IO_3 (1 << 3) -#define UCB_IO_4 (1 << 4) -#define UCB_IO_5 (1 << 5) -#define UCB_IO_6 (1 << 6) -#define UCB_IO_7 (1 << 7) -#define UCB_IO_8 (1 << 8) -#define UCB_IO_9 (1 << 9) - -#define UCB_IE_RIS 0x02 -#define UCB_IE_FAL 0x03 -#define UCB_IE_STATUS 0x04 -#define UCB_IE_CLEAR 0x04 -#define UCB_IE_ADC (1 << 11) -#define UCB_IE_TSPX (1 << 12) -#define UCB_IE_TSMX (1 << 13) -#define UCB_IE_TCLIP (1 << 14) -#define UCB_IE_ACLIP (1 << 15) - -#define UCB_IRQ_TSPX 12 - -#define UCB_TC_A 0x05 -#define UCB_TC_A_LOOP (1 << 7) /* UCB1200 */ -#define UCB_TC_A_AMPL (1 << 7) /* UCB1300 */ - -#define UCB_TC_B 0x06 -#define UCB_TC_B_VOICE_ENA (1 << 3) -#define UCB_TC_B_CLIP (1 << 4) -#define UCB_TC_B_ATT (1 << 6) -#define UCB_TC_B_SIDE_ENA (1 << 11) -#define UCB_TC_B_MUTE (1 << 13) -#define UCB_TC_B_IN_ENA (1 << 14) -#define UCB_TC_B_OUT_ENA (1 << 15) - -#define UCB_AC_A 0x07 -#define UCB_AC_B 0x08 -#define UCB_AC_B_LOOP (1 << 8) -#define UCB_AC_B_MUTE (1 << 13) -#define UCB_AC_B_IN_ENA (1 << 14) -#define UCB_AC_B_OUT_ENA (1 << 15) - -#define UCB_TS_CR 0x09 -#define UCB_TS_CR_TSMX_POW (1 << 0) -#define UCB_TS_CR_TSPX_POW (1 << 1) -#define UCB_TS_CR_TSMY_POW (1 << 2) -#define UCB_TS_CR_TSPY_POW (1 << 3) -#define UCB_TS_CR_TSMX_GND (1 << 4) -#define UCB_TS_CR_TSPX_GND (1 << 5) -#define UCB_TS_CR_TSMY_GND (1 << 6) -#define UCB_TS_CR_TSPY_GND (1 << 7) -#define UCB_TS_CR_MODE_INT (0 << 8) -#define UCB_TS_CR_MODE_PRES (1 << 8) -#define UCB_TS_CR_MODE_POS (2 << 8) -#define UCB_TS_CR_BIAS_ENA (1 << 11) -#define UCB_TS_CR_TSPX_LOW (1 << 12) -#define UCB_TS_CR_TSMX_LOW (1 << 13) - -#define UCB_ADC_CR 0x0a -#define UCB_ADC_SYNC_ENA (1 << 0) -#define UCB_ADC_VREFBYP_CON (1 << 1) -#define UCB_ADC_INP_TSPX (0 << 2) -#define UCB_ADC_INP_TSMX (1 << 2) -#define UCB_ADC_INP_TSPY (2 << 2) -#define UCB_ADC_INP_TSMY (3 << 2) -#define UCB_ADC_INP_AD0 (4 << 2) -#define UCB_ADC_INP_AD1 (5 << 2) -#define UCB_ADC_INP_AD2 (6 << 2) -#define UCB_ADC_INP_AD3 (7 << 2) -#define UCB_ADC_EXT_REF (1 << 5) -#define UCB_ADC_START (1 << 7) -#define UCB_ADC_ENA (1 << 15) - -#define UCB_ADC_DATA 0x0b -#define UCB_ADC_DAT_VAL (1 << 15) -#define UCB_ADC_DAT(x) (((x) & 0x7fe0) >> 5) - -#define UCB_ID 0x0c -#define UCB_ID_1200 0x1004 -#define UCB_ID_1300 0x1005 -#define UCB_ID_TC35143 0x9712 - -#define UCB_MODE 0x0d -#define UCB_MODE_DYN_VFLAG_ENA (1 << 12) -#define UCB_MODE_AUD_OFF_CAN (1 << 13) - -#include "mcp.h" - -struct ucb1x00_irq { - void *devid; - void (*fn)(int, void *); -}; - -struct ucb1x00 { - spinlock_t lock; - struct mcp *mcp; - unsigned int irq; - struct semaphore adc_sem; - spinlock_t io_lock; - u16 id; - u16 io_dir; - u16 io_out; - u16 adc_cr; - u16 irq_fal_enbl; - u16 irq_ris_enbl; - struct ucb1x00_irq irq_handler[16]; - struct device dev; - struct list_head node; - struct list_head devs; -}; - -struct ucb1x00_driver; - -struct ucb1x00_dev { - struct list_head dev_node; - struct list_head drv_node; - struct ucb1x00 *ucb; - struct ucb1x00_driver *drv; - void *priv; -}; - -struct ucb1x00_driver { - struct list_head node; - struct list_head devs; - int (*add)(struct ucb1x00_dev *dev); - void (*remove)(struct ucb1x00_dev *dev); - int (*suspend)(struct ucb1x00_dev *dev, pm_message_t state); - int (*resume)(struct ucb1x00_dev *dev); -}; - -#define classdev_to_ucb1x00(cd) container_of(cd, struct ucb1x00, dev) - -int ucb1x00_register_driver(struct ucb1x00_driver *); -void ucb1x00_unregister_driver(struct ucb1x00_driver *); - -/** - * ucb1x00_clkrate - return the UCB1x00 SIB clock rate - * @ucb: UCB1x00 structure describing chip - * - * Return the SIB clock rate in Hz. - */ -static inline unsigned int ucb1x00_clkrate(struct ucb1x00 *ucb) -{ - return mcp_get_sclk_rate(ucb->mcp); -} - -/** - * ucb1x00_enable - enable the UCB1x00 SIB clock - * @ucb: UCB1x00 structure describing chip - * - * Enable the SIB clock. This can be called multiple times. - */ -static inline void ucb1x00_enable(struct ucb1x00 *ucb) -{ - mcp_enable(ucb->mcp); -} - -/** - * ucb1x00_disable - disable the UCB1x00 SIB clock - * @ucb: UCB1x00 structure describing chip - * - * Disable the SIB clock. The SIB clock will only be disabled - * when the number of ucb1x00_enable calls match the number of - * ucb1x00_disable calls. - */ -static inline void ucb1x00_disable(struct ucb1x00 *ucb) -{ - mcp_disable(ucb->mcp); -} - -/** - * ucb1x00_reg_write - write a UCB1x00 register - * @ucb: UCB1x00 structure describing chip - * @reg: UCB1x00 4-bit register index to write - * @val: UCB1x00 16-bit value to write - * - * Write the UCB1x00 register @reg with value @val. The SIB - * clock must be running for this function to return. - */ -static inline void ucb1x00_reg_write(struct ucb1x00 *ucb, unsigned int reg, unsigned int val) -{ - mcp_reg_write(ucb->mcp, reg, val); -} - -/** - * ucb1x00_reg_read - read a UCB1x00 register - * @ucb: UCB1x00 structure describing chip - * @reg: UCB1x00 4-bit register index to write - * - * Read the UCB1x00 register @reg and return its value. The SIB - * clock must be running for this function to return. - */ -static inline unsigned int ucb1x00_reg_read(struct ucb1x00 *ucb, unsigned int reg) -{ - return mcp_reg_read(ucb->mcp, reg); -} -/** - * ucb1x00_set_audio_divisor - - * @ucb: UCB1x00 structure describing chip - * @div: SIB clock divisor - */ -static inline void ucb1x00_set_audio_divisor(struct ucb1x00 *ucb, unsigned int div) -{ - mcp_set_audio_divisor(ucb->mcp, div); -} - -/** - * ucb1x00_set_telecom_divisor - - * @ucb: UCB1x00 structure describing chip - * @div: SIB clock divisor - */ -static inline void ucb1x00_set_telecom_divisor(struct ucb1x00 *ucb, unsigned int div) -{ - mcp_set_telecom_divisor(ucb->mcp, div); -} - -void ucb1x00_io_set_dir(struct ucb1x00 *ucb, unsigned int, unsigned int); -void ucb1x00_io_write(struct ucb1x00 *ucb, unsigned int, unsigned int); -unsigned int ucb1x00_io_read(struct ucb1x00 *ucb); - -#define UCB_NOSYNC (0) -#define UCB_SYNC (1) - -unsigned int ucb1x00_adc_read(struct ucb1x00 *ucb, int adc_channel, int sync); -void ucb1x00_adc_enable(struct ucb1x00 *ucb); -void ucb1x00_adc_disable(struct ucb1x00 *ucb); - -/* - * Which edges of the IRQ do you want to control today? - */ -#define UCB_RISING (1 << 0) -#define UCB_FALLING (1 << 1) - -int ucb1x00_hook_irq(struct ucb1x00 *ucb, unsigned int idx, void (*fn)(int, void *), void *devid); -void ucb1x00_enable_irq(struct ucb1x00 *ucb, unsigned int idx, int edges); -void ucb1x00_disable_irq(struct ucb1x00 *ucb, unsigned int idx, int edges); -int ucb1x00_free_irq(struct ucb1x00 *ucb, unsigned int idx, void *devid); - -#endif diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index 705a5894a6bb..90d168ad03b6 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -56,7 +56,7 @@ static void mmci_set_clkreg(struct mmci_host *host, unsigned int desired) clk = 255; host->cclk = host->mclk / (2 * (clk + 1)); } - if (host->hw_designer == 0x80) + if (host->hw_designer == AMBA_VENDOR_ST) clk |= MCI_FCEN; /* Bug fix in ST IP block */ clk |= MCI_CLK_ENABLE; /* This hasn't proven to be worthwhile */ diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c index 9fb480bb0e0a..bb47ff465c04 100644 --- a/drivers/mmc/host/pxamci.c +++ b/drivers/mmc/host/pxamci.c @@ -43,6 +43,9 @@ #define NR_SG 1 #define CLKRT_OFF (~0) +#define mmc_has_26MHz() (cpu_is_pxa300() || cpu_is_pxa310() \ + || cpu_is_pxa935()) + struct pxamci_host { struct mmc_host *mmc; spinlock_t lock; @@ -457,7 +460,7 @@ static void pxamci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) clk_enable(host->clk); if (ios->clock == 26000000) { - /* to support 26MHz on pxa300/pxa310 */ + /* to support 26MHz */ host->clkrt = 7; } else { /* to handle (19.5MHz, 26MHz) */ @@ -608,8 +611,7 @@ static int pxamci_probe(struct platform_device *pdev) * Calculate minimum clock rate, rounding up. */ mmc->f_min = (host->clkrate + 63) / 64; - mmc->f_max = (cpu_is_pxa300() || cpu_is_pxa310()) ? 26000000 - : host->clkrate; + mmc->f_max = (mmc_has_26MHz()) ? 26000000 : host->clkrate; pxamci_init_ocr(host); @@ -618,7 +620,7 @@ static int pxamci_probe(struct platform_device *pdev) if (!cpu_is_pxa25x()) { mmc->caps |= MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ; host->cmdat |= CMDAT_SDIO_INT_EN; - if (cpu_is_pxa300() || cpu_is_pxa310()) + if (mmc_has_26MHz()) mmc->caps |= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED; } diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index 2fda0b615246..8f8e87b7ed64 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -358,7 +358,7 @@ endchoice config MTD_NAND_PXA3xx tristate "Support for NAND flash devices on PXA3xx" - depends on MTD_NAND && PXA3xx + depends on MTD_NAND && (PXA3xx || ARCH_MMP) help This enables the driver for the NAND flash device found on PXA3xx processors diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c index 6ea520ae2410..1a5a0365c983 100644 --- a/drivers/mtd/nand/pxa3xx_nand.c +++ b/drivers/mtd/nand/pxa3xx_nand.c @@ -9,6 +9,7 @@ * published by the Free Software Foundation. */ +#include <linux/kernel.h> #include <linux/module.h> #include <linux/interrupt.h> #include <linux/platform_device.h> @@ -22,7 +23,7 @@ #include <linux/irq.h> #include <mach/dma.h> -#include <mach/pxa3xx_nand.h> +#include <plat/pxa3xx_nand.h> #define CHIP_DELAY_TIMEOUT (2 * HZ/10) @@ -84,10 +85,6 @@ #define NDCB0_CMD1_MASK (0xff) #define NDCB0_ADDR_CYC_SHIFT (16) -/* dma-able I/O address for the NAND data and commands */ -#define NDCB0_DMA_ADDR (0x43100048) -#define NDDB_DMA_ADDR (0x43100040) - /* macros for registers read/write */ #define nand_writel(info, off, val) \ __raw_writel((val), (info)->mmio_base + (off)) @@ -123,6 +120,7 @@ struct pxa3xx_nand_info { struct clk *clk; void __iomem *mmio_base; + unsigned long mmio_phys; unsigned int buf_start; unsigned int buf_count; @@ -228,13 +226,35 @@ static struct pxa3xx_nand_flash samsung512MbX16 = { .chip_id = 0x46ec, }; +static struct pxa3xx_nand_flash samsung2GbX8 = { + .timing = &samsung512MbX16_timing, + .cmdset = &smallpage_cmdset, + .page_per_block = 64, + .page_size = 2048, + .flash_width = 8, + .dfc_width = 8, + .num_blocks = 2048, + .chip_id = 0xdaec, +}; + +static struct pxa3xx_nand_flash samsung32GbX8 = { + .timing = &samsung512MbX16_timing, + .cmdset = &smallpage_cmdset, + .page_per_block = 128, + .page_size = 4096, + .flash_width = 8, + .dfc_width = 8, + .num_blocks = 8192, + .chip_id = 0xd7ec, +}; + static struct pxa3xx_nand_timing micron_timing = { .tCH = 10, .tCS = 25, .tWH = 15, .tWP = 25, .tRH = 15, - .tRP = 25, + .tRP = 30, .tR = 25000, .tWHR = 60, .tAR = 10, @@ -262,6 +282,28 @@ static struct pxa3xx_nand_flash micron1GbX16 = { .chip_id = 0xb12c, }; +static struct pxa3xx_nand_flash micron4GbX8 = { + .timing = µn_timing, + .cmdset = &largepage_cmdset, + .page_per_block = 64, + .page_size = 2048, + .flash_width = 8, + .dfc_width = 8, + .num_blocks = 4096, + .chip_id = 0xdc2c, +}; + +static struct pxa3xx_nand_flash micron4GbX16 = { + .timing = µn_timing, + .cmdset = &largepage_cmdset, + .page_per_block = 64, + .page_size = 2048, + .flash_width = 16, + .dfc_width = 16, + .num_blocks = 4096, + .chip_id = 0xcc2c, +}; + static struct pxa3xx_nand_timing stm2GbX16_timing = { .tCH = 10, .tCS = 35, @@ -287,8 +329,12 @@ static struct pxa3xx_nand_flash stm2GbX16 = { static struct pxa3xx_nand_flash *builtin_flash_types[] = { &samsung512MbX16, + &samsung2GbX8, + &samsung32GbX8, µn1GbX8, µn1GbX16, + µn4GbX8, + µn4GbX16, &stm2GbX16, }; #endif /* CONFIG_MTD_NAND_PXA3xx_BUILTIN */ @@ -489,7 +535,7 @@ static int handle_data_pio(struct pxa3xx_nand_info *info) switch (info->state) { case STATE_PIO_WRITING: __raw_writesl(info->mmio_base + NDDB, info->data_buff, - info->data_size << 2); + DIV_ROUND_UP(info->data_size, 4)); enable_int(info, NDSR_CS0_BBD | NDSR_CS0_CMDD); @@ -501,7 +547,7 @@ static int handle_data_pio(struct pxa3xx_nand_info *info) break; case STATE_PIO_READING: __raw_readsl(info->mmio_base + NDDB, info->data_buff, - info->data_size << 2); + DIV_ROUND_UP(info->data_size, 4)); break; default: printk(KERN_ERR "%s: invalid state %d\n", __func__, @@ -523,11 +569,11 @@ static void start_data_dma(struct pxa3xx_nand_info *info, int dir_out) if (dir_out) { desc->dsadr = info->data_buff_phys; - desc->dtadr = NDDB_DMA_ADDR; + desc->dtadr = info->mmio_phys + NDDB; desc->dcmd |= DCMD_INCSRCADDR | DCMD_FLOWTRG; } else { desc->dtadr = info->data_buff_phys; - desc->dsadr = NDDB_DMA_ADDR; + desc->dsadr = info->mmio_phys + NDDB; desc->dcmd |= DCMD_INCTRGADDR | DCMD_FLOWSRC; } @@ -669,6 +715,7 @@ static void pxa3xx_nand_cmdfunc(struct mtd_info *mtd, unsigned command, /* disable HW ECC to get all the OOB data */ info->buf_count = mtd->writesize + mtd->oobsize; info->buf_start = mtd->writesize + column; + memset(info->data_buff, 0xFF, info->buf_count); if (prepare_read_prog_cmd(info, cmdset->read1, column, page_addr)) break; @@ -1239,13 +1286,17 @@ static int pxa3xx_nand_probe(struct platform_device *pdev) ret = -ENODEV; goto fail_free_res; } + info->mmio_phys = r->start; ret = pxa3xx_nand_init_buff(info); if (ret) goto fail_free_io; - ret = request_irq(IRQ_NAND, pxa3xx_nand_irq, IRQF_DISABLED, - pdev->name, info); + /* initialize all interrupts to be disabled */ + disable_int(info, NDSR_MASK); + + ret = request_irq(irq, pxa3xx_nand_irq, IRQF_DISABLED, + pdev->name, info); if (ret < 0) { dev_err(&pdev->dev, "failed to request IRQ\n"); goto fail_free_buf; @@ -1271,7 +1322,7 @@ static int pxa3xx_nand_probe(struct platform_device *pdev) return add_mtd_partitions(mtd, pdata->parts, pdata->nr_parts); fail_free_irq: - free_irq(IRQ_NAND, info); + free_irq(irq, info); fail_free_buf: if (use_dma) { pxa_free_dma(info->data_dma_ch); @@ -1296,12 +1347,15 @@ static int pxa3xx_nand_remove(struct platform_device *pdev) struct mtd_info *mtd = platform_get_drvdata(pdev); struct pxa3xx_nand_info *info = mtd->priv; struct resource *r; + int irq; platform_set_drvdata(pdev, NULL); del_mtd_device(mtd); del_mtd_partitions(mtd); - free_irq(IRQ_NAND, info); + irq = platform_get_irq(pdev, 0); + if (irq >= 0) + free_irq(irq, info); if (use_dma) { pxa_free_dma(info->data_dma_ch); dma_free_writecombine(&pdev->dev, info->data_buff_size, diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig index f3ccbccf5f21..cd5082d3ca19 100644 --- a/drivers/pcmcia/Kconfig +++ b/drivers/pcmcia/Kconfig @@ -179,7 +179,7 @@ config PCMCIA_BCM63XX depends on BCM63XX && PCMCIA config PCMCIA_SOC_COMMON - bool + tristate config PCMCIA_SA1100 tristate "SA1100 support" diff --git a/drivers/pcmcia/sa1100_generic.c b/drivers/pcmcia/sa1100_generic.c index 11cc3ba1260a..8db86b90c200 100644 --- a/drivers/pcmcia/sa1100_generic.c +++ b/drivers/pcmcia/sa1100_generic.c @@ -51,7 +51,7 @@ static int (*sa11x0_pcmcia_hw_init[])(struct device *dev) = { #ifdef CONFIG_SA1100_CERF pcmcia_cerf_init, #endif -#ifdef CONFIG_SA1100_H3600 +#if defined(CONFIG_SA1100_H3100) || defined(CONFIG_SA1100_H3600) pcmcia_h3600_init, #endif #ifdef CONFIG_SA1100_SHANNON diff --git a/drivers/pcmcia/sa1100_h3600.c b/drivers/pcmcia/sa1100_h3600.c index 3a121ac697d6..56329ad575a9 100644 --- a/drivers/pcmcia/sa1100_h3600.c +++ b/drivers/pcmcia/sa1100_h3600.c @@ -10,47 +10,139 @@ #include <linux/interrupt.h> #include <linux/init.h> #include <linux/delay.h> +#include <linux/gpio.h> #include <mach/hardware.h> #include <asm/irq.h> #include <asm/mach-types.h> -#include <mach/h3600.h> +#include <mach/h3xxx.h> #include "sa1100_generic.h" static struct pcmcia_irqs irqs[] = { - { 0, IRQ_GPIO_H3600_PCMCIA_CD0, "PCMCIA CD0" }, - { 1, IRQ_GPIO_H3600_PCMCIA_CD1, "PCMCIA CD1" } + { .sock = 0, .str = "PCMCIA CD0" }, /* .irq will be filled later */ + { .sock = 1, .str = "PCMCIA CD1" } }; static int h3600_pcmcia_hw_init(struct soc_pcmcia_socket *skt) { - skt->socket.pci_irq = skt->nr ? IRQ_GPIO_H3600_PCMCIA_IRQ1 - : IRQ_GPIO_H3600_PCMCIA_IRQ0; + int err; + switch (skt->nr) { + case 0: + err = gpio_request(H3XXX_GPIO_PCMCIA_IRQ0, "PCMCIA IRQ0"); + if (err) + goto err00; + err = gpio_direction_input(H3XXX_GPIO_PCMCIA_IRQ0); + if (err) + goto err01; + skt->socket.pci_irq = gpio_to_irq(H3XXX_GPIO_PCMCIA_IRQ0); + + err = gpio_request(H3XXX_GPIO_PCMCIA_CD0, "PCMCIA CD0"); + if (err) + goto err01; + err = gpio_direction_input(H3XXX_GPIO_PCMCIA_CD0); + if (err) + goto err02; + irqs[0].irq = gpio_to_irq(H3XXX_GPIO_PCMCIA_CD0); + + err = gpio_request(H3XXX_EGPIO_OPT_NVRAM_ON, "OPT NVRAM ON"); + if (err) + goto err02; + err = gpio_direction_output(H3XXX_EGPIO_OPT_NVRAM_ON, 0); + if (err) + goto err03; + err = gpio_request(H3XXX_EGPIO_OPT_ON, "OPT ON"); + if (err) + goto err03; + err = gpio_direction_output(H3XXX_EGPIO_OPT_ON, 0); + if (err) + goto err04; + err = gpio_request(H3XXX_EGPIO_OPT_RESET, "OPT RESET"); + if (err) + goto err04; + err = gpio_direction_output(H3XXX_EGPIO_OPT_RESET, 0); + if (err) + goto err05; + err = gpio_request(H3XXX_EGPIO_CARD_RESET, "PCMCIA CARD RESET"); + if (err) + goto err05; + err = gpio_direction_output(H3XXX_EGPIO_CARD_RESET, 0); + if (err) + goto err06; + err = soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs)); + if (err) + goto err06; + break; + case 1: + err = gpio_request(H3XXX_GPIO_PCMCIA_IRQ1, "PCMCIA IRQ1"); + if (err) + goto err10; + err = gpio_direction_input(H3XXX_GPIO_PCMCIA_IRQ1); + if (err) + goto err11; + skt->socket.pci_irq = gpio_to_irq(H3XXX_GPIO_PCMCIA_IRQ1); + + err = gpio_request(H3XXX_GPIO_PCMCIA_CD1, "PCMCIA CD1"); + if (err) + goto err11; + err = gpio_direction_input(H3XXX_GPIO_PCMCIA_CD1); + if (err) + goto err12; + irqs[1].irq = gpio_to_irq(H3XXX_GPIO_PCMCIA_CD1); + + err = soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs)); + if (err) + goto err12; + break; + } + return 0; - return soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs)); +err06: gpio_free(H3XXX_EGPIO_CARD_RESET); +err05: gpio_free(H3XXX_EGPIO_OPT_RESET); +err04: gpio_free(H3XXX_EGPIO_OPT_ON); +err03: gpio_free(H3XXX_EGPIO_OPT_NVRAM_ON); +err02: gpio_free(H3XXX_GPIO_PCMCIA_CD0); +err01: gpio_free(H3XXX_GPIO_PCMCIA_IRQ0); +err00: return err; + +err12: gpio_free(H3XXX_GPIO_PCMCIA_CD0); +err11: gpio_free(H3XXX_GPIO_PCMCIA_IRQ0); +err10: return err; } static void h3600_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt) { soc_pcmcia_free_irqs(skt, irqs, ARRAY_SIZE(irqs)); - /* Disable CF bus: */ - assign_h3600_egpio(IPAQ_EGPIO_OPT_NVRAM_ON, 0); - assign_h3600_egpio(IPAQ_EGPIO_OPT_ON, 0); - assign_h3600_egpio(IPAQ_EGPIO_OPT_RESET, 1); + switch (skt->nr) { + case 0: + /* Disable CF bus: */ + gpio_set_value(H3XXX_EGPIO_OPT_NVRAM_ON, 0); + gpio_set_value(H3XXX_EGPIO_OPT_ON, 0); + gpio_set_value(H3XXX_EGPIO_OPT_RESET, 1); + + gpio_free(H3XXX_EGPIO_CARD_RESET); + gpio_free(H3XXX_EGPIO_OPT_RESET); + gpio_free(H3XXX_EGPIO_OPT_ON); + gpio_free(H3XXX_EGPIO_OPT_NVRAM_ON); + gpio_free(H3XXX_GPIO_PCMCIA_CD0); + gpio_free(H3XXX_GPIO_PCMCIA_IRQ0); + break; + case 1: + gpio_free(H3XXX_GPIO_PCMCIA_CD1); + gpio_free(H3XXX_GPIO_PCMCIA_IRQ1); + break; + } } static void h3600_pcmcia_socket_state(struct soc_pcmcia_socket *skt, struct pcmcia_state *state) { - unsigned long levels = GPLR; - switch (skt->nr) { case 0: - state->detect = levels & GPIO_H3600_PCMCIA_CD0 ? 0 : 1; - state->ready = levels & GPIO_H3600_PCMCIA_IRQ0 ? 1 : 0; + state->detect = !gpio_get_value(H3XXX_GPIO_PCMCIA_CD0); + state->ready = !!gpio_get_value(H3XXX_GPIO_PCMCIA_IRQ0); state->bvd1 = 0; state->bvd2 = 0; state->wrprot = 0; /* Not available on H3600. */ @@ -59,8 +151,8 @@ h3600_pcmcia_socket_state(struct soc_pcmcia_socket *skt, struct pcmcia_state *st break; case 1: - state->detect = levels & GPIO_H3600_PCMCIA_CD1 ? 0 : 1; - state->ready = levels & GPIO_H3600_PCMCIA_IRQ1 ? 1 : 0; + state->detect = !gpio_get_value(H3XXX_GPIO_PCMCIA_CD1); + state->ready = !!gpio_get_value(H3XXX_GPIO_PCMCIA_IRQ1); state->bvd1 = 0; state->bvd2 = 0; state->wrprot = 0; /* Not available on H3600. */ @@ -79,7 +171,7 @@ h3600_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, const socket_state_ return -1; } - assign_h3600_egpio(IPAQ_EGPIO_CARD_RESET, !!(state->flags & SS_RESET)); + gpio_set_value(H3XXX_EGPIO_CARD_RESET, !!(state->flags & SS_RESET)); /* Silently ignore Vpp, output enable, speaker enable. */ @@ -89,9 +181,9 @@ h3600_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, const socket_state_ static void h3600_pcmcia_socket_init(struct soc_pcmcia_socket *skt) { /* Enable CF bus: */ - assign_h3600_egpio(IPAQ_EGPIO_OPT_NVRAM_ON, 1); - assign_h3600_egpio(IPAQ_EGPIO_OPT_ON, 1); - assign_h3600_egpio(IPAQ_EGPIO_OPT_RESET, 0); + gpio_set_value(H3XXX_EGPIO_OPT_NVRAM_ON, 1); + gpio_set_value(H3XXX_EGPIO_OPT_ON, 1); + gpio_set_value(H3XXX_EGPIO_OPT_RESET, 0); msleep(10); @@ -109,10 +201,10 @@ static void h3600_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt) * socket 0 then socket 1. */ if (skt->nr == 1) { - assign_h3600_egpio(IPAQ_EGPIO_OPT_ON, 0); - assign_h3600_egpio(IPAQ_EGPIO_OPT_NVRAM_ON, 0); + gpio_set_value(H3XXX_EGPIO_OPT_ON, 0); + gpio_set_value(H3XXX_EGPIO_OPT_NVRAM_ON, 0); /* hmm, does this suck power? */ - assign_h3600_egpio(IPAQ_EGPIO_OPT_RESET, 1); + gpio_set_value(H3XXX_EGPIO_OPT_RESET, 1); } } @@ -131,7 +223,7 @@ int __init pcmcia_h3600_init(struct device *dev) { int ret = -ENODEV; - if (machine_is_h3600()) + if (machine_is_h3600() || machine_is_h3100()) ret = sa11xx_drv_pcmcia_probe(dev, &h3600_pcmcia_ops, 0, 2); return ret; diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig index cea6cef27e89..118674925516 100644 --- a/drivers/power/Kconfig +++ b/drivers/power/Kconfig @@ -77,6 +77,13 @@ config BATTERY_TOSA Say Y to enable support for the battery on the Sharp Zaurus SL-6000 (tosa) models. +config BATTERY_COLLIE + tristate "Sharp SL-5500 (collie) battery" + depends on SA1100_COLLIE && MCP_UCB1200 + help + Say Y to enable support for the battery on the Sharp Zaurus + SL-5500 (collie) models. + config BATTERY_WM97XX bool "WM97xx generic battery driver" depends on TOUCHSCREEN_WM97XX=y diff --git a/drivers/power/Makefile b/drivers/power/Makefile index b96f29d91c28..356cdfd3c8b2 100644 --- a/drivers/power/Makefile +++ b/drivers/power/Makefile @@ -24,6 +24,7 @@ obj-$(CONFIG_BATTERY_DS2782) += ds2782_battery.o obj-$(CONFIG_BATTERY_PMU) += pmu_battery.o obj-$(CONFIG_BATTERY_OLPC) += olpc_battery.o obj-$(CONFIG_BATTERY_TOSA) += tosa_battery.o +obj-$(CONFIG_BATTERY_COLLIE) += collie_battery.o obj-$(CONFIG_BATTERY_WM97XX) += wm97xx_battery.o obj-$(CONFIG_BATTERY_BQ27x00) += bq27x00_battery.o obj-$(CONFIG_BATTERY_DA9030) += da9030_battery.o diff --git a/drivers/power/collie_battery.c b/drivers/power/collie_battery.c new file mode 100644 index 000000000000..039f41ae217d --- /dev/null +++ b/drivers/power/collie_battery.c @@ -0,0 +1,418 @@ +/* + * Battery and Power Management code for the Sharp SL-5x00 + * + * Copyright (C) 2009 Thomas Kunze + * + * based on tosa_battery.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/power_supply.h> +#include <linux/delay.h> +#include <linux/spinlock.h> +#include <linux/interrupt.h> +#include <linux/gpio.h> +#include <linux/mfd/ucb1x00.h> + +#include <asm/mach/sharpsl_param.h> +#include <asm/mach-types.h> +#include <mach/collie.h> + +static DEFINE_MUTEX(bat_lock); /* protects gpio pins */ +static struct work_struct bat_work; +static struct ucb1x00 *ucb; + +struct collie_bat { + int status; + struct power_supply psy; + int full_chrg; + + struct mutex work_lock; /* protects data */ + + bool (*is_present)(struct collie_bat *bat); + int gpio_full; + int gpio_charge_on; + + int technology; + + int gpio_bat; + int adc_bat; + int adc_bat_divider; + int bat_max; + int bat_min; + + int gpio_temp; + int adc_temp; + int adc_temp_divider; +}; + +static struct collie_bat collie_bat_main; + +static unsigned long collie_read_bat(struct collie_bat *bat) +{ + unsigned long value = 0; + + if (bat->gpio_bat < 0 || bat->adc_bat < 0) + return 0; + mutex_lock(&bat_lock); + gpio_set_value(bat->gpio_bat, 1); + msleep(5); + ucb1x00_adc_enable(ucb); + value = ucb1x00_adc_read(ucb, bat->adc_bat, UCB_SYNC); + ucb1x00_adc_disable(ucb); + gpio_set_value(bat->gpio_bat, 0); + mutex_unlock(&bat_lock); + value = value * 1000000 / bat->adc_bat_divider; + + return value; +} + +static unsigned long collie_read_temp(struct collie_bat *bat) +{ + unsigned long value = 0; + if (bat->gpio_temp < 0 || bat->adc_temp < 0) + return 0; + + mutex_lock(&bat_lock); + gpio_set_value(bat->gpio_temp, 1); + msleep(5); + ucb1x00_adc_enable(ucb); + value = ucb1x00_adc_read(ucb, bat->adc_temp, UCB_SYNC); + ucb1x00_adc_disable(ucb); + gpio_set_value(bat->gpio_temp, 0); + mutex_unlock(&bat_lock); + + value = value * 10000 / bat->adc_temp_divider; + + return value; +} + +static int collie_bat_get_property(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + int ret = 0; + struct collie_bat *bat = container_of(psy, struct collie_bat, psy); + + if (bat->is_present && !bat->is_present(bat) + && psp != POWER_SUPPLY_PROP_PRESENT) { + return -ENODEV; + } + + switch (psp) { + case POWER_SUPPLY_PROP_STATUS: + val->intval = bat->status; + break; + case POWER_SUPPLY_PROP_TECHNOLOGY: + val->intval = bat->technology; + break; + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + val->intval = collie_read_bat(bat); + break; + case POWER_SUPPLY_PROP_VOLTAGE_MAX: + if (bat->full_chrg == -1) + val->intval = bat->bat_max; + else + val->intval = bat->full_chrg; + break; + case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN: + val->intval = bat->bat_max; + break; + case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN: + val->intval = bat->bat_min; + break; + case POWER_SUPPLY_PROP_TEMP: + val->intval = collie_read_temp(bat); + break; + case POWER_SUPPLY_PROP_PRESENT: + val->intval = bat->is_present ? bat->is_present(bat) : 1; + break; + default: + ret = -EINVAL; + break; + } + return ret; +} + +static void collie_bat_external_power_changed(struct power_supply *psy) +{ + schedule_work(&bat_work); +} + +static irqreturn_t collie_bat_gpio_isr(int irq, void *data) +{ + pr_info("collie_bat_gpio irq: %d\n", gpio_get_value(irq_to_gpio(irq))); + schedule_work(&bat_work); + return IRQ_HANDLED; +} + +static void collie_bat_update(struct collie_bat *bat) +{ + int old; + struct power_supply *psy = &bat->psy; + + mutex_lock(&bat->work_lock); + + old = bat->status; + + if (bat->is_present && !bat->is_present(bat)) { + printk(KERN_NOTICE "%s not present\n", psy->name); + bat->status = POWER_SUPPLY_STATUS_UNKNOWN; + bat->full_chrg = -1; + } else if (power_supply_am_i_supplied(psy)) { + if (bat->status == POWER_SUPPLY_STATUS_DISCHARGING) { + gpio_set_value(bat->gpio_charge_on, 1); + mdelay(15); + } + + if (gpio_get_value(bat->gpio_full)) { + if (old == POWER_SUPPLY_STATUS_CHARGING || + bat->full_chrg == -1) + bat->full_chrg = collie_read_bat(bat); + + gpio_set_value(bat->gpio_charge_on, 0); + bat->status = POWER_SUPPLY_STATUS_FULL; + } else { + gpio_set_value(bat->gpio_charge_on, 1); + bat->status = POWER_SUPPLY_STATUS_CHARGING; + } + } else { + gpio_set_value(bat->gpio_charge_on, 0); + bat->status = POWER_SUPPLY_STATUS_DISCHARGING; + } + + if (old != bat->status) + power_supply_changed(psy); + + mutex_unlock(&bat->work_lock); +} + +static void collie_bat_work(struct work_struct *work) +{ + collie_bat_update(&collie_bat_main); +} + + +static enum power_supply_property collie_bat_main_props[] = { + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_TECHNOLOGY, + POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN, + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN, + POWER_SUPPLY_PROP_VOLTAGE_MAX, + POWER_SUPPLY_PROP_PRESENT, + POWER_SUPPLY_PROP_TEMP, +}; + +static enum power_supply_property collie_bat_bu_props[] = { + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_TECHNOLOGY, + POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN, + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN, + POWER_SUPPLY_PROP_VOLTAGE_MAX, + POWER_SUPPLY_PROP_PRESENT, +}; + +static struct collie_bat collie_bat_main = { + .status = POWER_SUPPLY_STATUS_DISCHARGING, + .full_chrg = -1, + .psy = { + .name = "main-battery", + .type = POWER_SUPPLY_TYPE_BATTERY, + .properties = collie_bat_main_props, + .num_properties = ARRAY_SIZE(collie_bat_main_props), + .get_property = collie_bat_get_property, + .external_power_changed = collie_bat_external_power_changed, + .use_for_apm = 1, + }, + + .gpio_full = COLLIE_GPIO_CO, + .gpio_charge_on = COLLIE_GPIO_CHARGE_ON, + + .technology = POWER_SUPPLY_TECHNOLOGY_LIPO, + + .gpio_bat = COLLIE_GPIO_MBAT_ON, + .adc_bat = UCB_ADC_INP_AD1, + .adc_bat_divider = 155, + .bat_max = 4310000, + .bat_min = 1551 * 1000000 / 414, + + .gpio_temp = COLLIE_GPIO_TMP_ON, + .adc_temp = UCB_ADC_INP_AD0, + .adc_temp_divider = 10000, +}; + +static struct collie_bat collie_bat_bu = { + .status = POWER_SUPPLY_STATUS_UNKNOWN, + .full_chrg = -1, + + .psy = { + .name = "backup-battery", + .type = POWER_SUPPLY_TYPE_BATTERY, + .properties = collie_bat_bu_props, + .num_properties = ARRAY_SIZE(collie_bat_bu_props), + .get_property = collie_bat_get_property, + .external_power_changed = collie_bat_external_power_changed, + }, + + .gpio_full = -1, + .gpio_charge_on = -1, + + .technology = POWER_SUPPLY_TECHNOLOGY_LiMn, + + .gpio_bat = COLLIE_GPIO_BBAT_ON, + .adc_bat = UCB_ADC_INP_AD1, + .adc_bat_divider = 155, + .bat_max = 3000000, + .bat_min = 1900000, + + .gpio_temp = -1, + .adc_temp = -1, + .adc_temp_divider = -1, +}; + +static struct { + int gpio; + char *name; + bool output; + int value; +} gpios[] = { + { COLLIE_GPIO_CO, "main battery full", 0, 0 }, + { COLLIE_GPIO_MAIN_BAT_LOW, "main battery low", 0, 0 }, + { COLLIE_GPIO_CHARGE_ON, "main charge on", 1, 0 }, + { COLLIE_GPIO_MBAT_ON, "main battery", 1, 0 }, + { COLLIE_GPIO_TMP_ON, "main battery temp", 1, 0 }, + { COLLIE_GPIO_BBAT_ON, "backup battery", 1, 0 }, +}; + +#ifdef CONFIG_PM +static int collie_bat_suspend(struct ucb1x00_dev *dev, pm_message_t state) +{ + /* flush all pending status updates */ + flush_scheduled_work(); + return 0; +} + +static int collie_bat_resume(struct ucb1x00_dev *dev) +{ + /* things may have changed while we were away */ + schedule_work(&bat_work); + return 0; +} +#else +#define collie_bat_suspend NULL +#define collie_bat_resume NULL +#endif + +static int __devinit collie_bat_probe(struct ucb1x00_dev *dev) +{ + int ret; + int i; + + if (!machine_is_collie()) + return -ENODEV; + + ucb = dev->ucb; + + for (i = 0; i < ARRAY_SIZE(gpios); i++) { + ret = gpio_request(gpios[i].gpio, gpios[i].name); + if (ret) { + i--; + goto err_gpio; + } + + if (gpios[i].output) + ret = gpio_direction_output(gpios[i].gpio, + gpios[i].value); + else + ret = gpio_direction_input(gpios[i].gpio); + + if (ret) + goto err_gpio; + } + + mutex_init(&collie_bat_main.work_lock); + + INIT_WORK(&bat_work, collie_bat_work); + + ret = power_supply_register(&dev->ucb->dev, &collie_bat_main.psy); + if (ret) + goto err_psy_reg_main; + ret = power_supply_register(&dev->ucb->dev, &collie_bat_bu.psy); + if (ret) + goto err_psy_reg_bu; + + ret = request_irq(gpio_to_irq(COLLIE_GPIO_CO), + collie_bat_gpio_isr, + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, + "main full", &collie_bat_main); + if (!ret) { + schedule_work(&bat_work); + return 0; + } + power_supply_unregister(&collie_bat_bu.psy); +err_psy_reg_bu: + power_supply_unregister(&collie_bat_main.psy); +err_psy_reg_main: + + /* see comment in collie_bat_remove */ + flush_scheduled_work(); + + i--; +err_gpio: + for (; i >= 0; i--) + gpio_free(gpios[i].gpio); + + return ret; +} + +static void __devexit collie_bat_remove(struct ucb1x00_dev *dev) +{ + int i; + + free_irq(gpio_to_irq(COLLIE_GPIO_CO), &collie_bat_main); + + power_supply_unregister(&collie_bat_bu.psy); + power_supply_unregister(&collie_bat_main.psy); + + /* + * now flush all pending work. + * we won't get any more schedules, since all + * sources (isr and external_power_changed) + * are unregistered now. + */ + flush_scheduled_work(); + + for (i = ARRAY_SIZE(gpios) - 1; i >= 0; i--) + gpio_free(gpios[i].gpio); +} + +static struct ucb1x00_driver collie_bat_driver = { + .add = collie_bat_probe, + .remove = __devexit_p(collie_bat_remove), + .suspend = collie_bat_suspend, + .resume = collie_bat_resume, +}; + +static int __init collie_bat_init(void) +{ + return ucb1x00_register_driver(&collie_bat_driver); +} + +static void __exit collie_bat_exit(void) +{ + ucb1x00_unregister_driver(&collie_bat_driver); +} + +module_init(collie_bat_init); +module_exit(collie_bat_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Thomas Kunze"); +MODULE_DESCRIPTION("Collie battery driver"); diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index 3c20dae43ce2..e11e1cda4ba2 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -780,7 +780,7 @@ config RTC_DRV_TX4939 config RTC_DRV_MV tristate "Marvell SoC RTC" - depends on ARCH_KIRKWOOD + depends on ARCH_KIRKWOOD || ARCH_DOVE help If you say yes here you will get support for the in-chip RTC that can be found in some of Marvell's SoC devices, such as diff --git a/drivers/serial/s3c2410.c b/drivers/serial/s3c2410.c index c99f0821cae3..73f089d3efd6 100644 --- a/drivers/serial/s3c2410.c +++ b/drivers/serial/s3c2410.c @@ -2,7 +2,7 @@ * * Driver for Samsung S3C2410 SoC onboard UARTs. * - * Ben Dooks, Copyright (c) 2003-2005,2008 Simtec Electronics + * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics * http://armlinux.simtec.co.uk/ * * This program is free software; you can redistribute it and/or modify diff --git a/drivers/serial/s3c2412.c b/drivers/serial/s3c2412.c index 6e057d8809d3..ce75e28e36ef 100644 --- a/drivers/serial/s3c2412.c +++ b/drivers/serial/s3c2412.c @@ -2,7 +2,7 @@ * * Driver for Samsung S3C2412 and S3C2413 SoC onboard UARTs. * - * Ben Dooks, Copyright (c) 2003-2005,2008 Simtec Electronics + * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics * http://armlinux.simtec.co.uk/ * * This program is free software; you can redistribute it and/or modify diff --git a/drivers/serial/s3c2440.c b/drivers/serial/s3c2440.c index 69ff5d340f04..094cc3904b13 100644 --- a/drivers/serial/s3c2440.c +++ b/drivers/serial/s3c2440.c @@ -2,7 +2,7 @@ * * Driver for Samsung S3C2440 and S3C2442 SoC onboard UARTs. * - * Ben Dooks, Copyright (c) 2003-2005,2008 Simtec Electronics + * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics * http://armlinux.simtec.co.uk/ * * This program is free software; you can redistribute it and/or modify diff --git a/drivers/serial/s3c24a0.c b/drivers/serial/s3c24a0.c index 26c49e18bdd1..fad6083ca427 100644 --- a/drivers/serial/s3c24a0.c +++ b/drivers/serial/s3c24a0.c @@ -6,7 +6,7 @@ * * Author: Sandeep Patil <sandeep.patil@azingo.com> * - * Ben Dooks, Copyright (c) 2003-2005,2008 Simtec Electronics + * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics * http://armlinux.simtec.co.uk/ * * This program is free software; you can redistribute it and/or modify diff --git a/drivers/serial/samsung.c b/drivers/serial/samsung.c index 1523e8d9ae77..52e3df113ec0 100644 --- a/drivers/serial/samsung.c +++ b/drivers/serial/samsung.c @@ -2,7 +2,7 @@ * * Driver core for Samsung SoC onboard UARTs. * - * Ben Dooks, Copyright (c) 2003-2005,2008 Simtec Electronics + * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics * http://armlinux.simtec.co.uk/ * * This program is free software; you can redistribute it and/or modify diff --git a/drivers/serial/samsung.h b/drivers/serial/samsung.h index d3fe315969f6..1fb22343df42 100644 --- a/drivers/serial/samsung.h +++ b/drivers/serial/samsung.h @@ -2,7 +2,7 @@ * * Driver for Samsung SoC onboard UARTs. * - * Ben Dooks, Copyright (c) 2003-2005,2008 Simtec Electronics + * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics * http://armlinux.simtec.co.uk/ * * This program is free software; you can redistribute it and/or modify diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 188e1ba3b69f..6b89eb55ed32 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -5,6 +5,9 @@ menu "Graphics support" depends on HAS_IOMEM +config HAVE_FB_ATMEL + bool + source "drivers/char/agp/Kconfig" source "drivers/gpu/vga/Kconfig" @@ -937,7 +940,7 @@ config FB_S1D13XXX config FB_ATMEL tristate "AT91/AT32 LCD Controller support" - depends on FB && (ARCH_AT91SAM9261 || ARCH_AT91SAM9G10 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91SAM9G45 || ARCH_AT91CAP9 || AVR32) + depends on FB && HAVE_FB_ATMEL select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT diff --git a/drivers/video/backlight/da903x_bl.c b/drivers/video/backlight/da903x_bl.c index 701a1081e199..7fcb0eb54c60 100644 --- a/drivers/video/backlight/da903x_bl.c +++ b/drivers/video/backlight/da903x_bl.c @@ -25,6 +25,7 @@ #define DA9034_WLED_CONTROL1 0x3C #define DA9034_WLED_CONTROL2 0x3D +#define DA9034_WLED_ISET(x) ((x) & 0x1f) #define DA9034_WLED_BOOST_EN (1 << 5) @@ -101,6 +102,7 @@ static struct backlight_ops da903x_backlight_ops = { static int da903x_backlight_probe(struct platform_device *pdev) { + struct da9034_backlight_pdata *pdata = pdev->dev.platform_data; struct da903x_backlight_data *data; struct backlight_device *bl; int max_brightness; @@ -127,6 +129,11 @@ static int da903x_backlight_probe(struct platform_device *pdev) data->da903x_dev = pdev->dev.parent; data->current_brightness = 0; + /* adjust the WLED output current */ + if (pdata) + da903x_write(data->da903x_dev, DA9034_WLED_CONTROL2, + DA9034_WLED_ISET(pdata->output_current)); + bl = backlight_device_register(pdev->name, data->da903x_dev, data, &da903x_backlight_ops); if (IS_ERR(bl)) { diff --git a/drivers/video/backlight/tdo24m.c b/drivers/video/backlight/tdo24m.c index bbfb502add67..4a3d46e08016 100644 --- a/drivers/video/backlight/tdo24m.c +++ b/drivers/video/backlight/tdo24m.c @@ -367,6 +367,7 @@ static int __devinit tdo24m_probe(struct spi_device *spi) spi_message_init(m); + x->cs_change = 1; x->tx_buf = &lcd->buf[0]; spi_message_add_tail(x, m); diff --git a/drivers/video/pxa168fb.c b/drivers/video/pxa168fb.c index 84d8327e47db..75285d3f393c 100644 --- a/drivers/video/pxa168fb.c +++ b/drivers/video/pxa168fb.c @@ -687,6 +687,7 @@ static int __init pxa168fb_probe(struct platform_device *pdev) } info->fix.smem_start = (unsigned long)fbi->fb_start_dma; + set_graphics_start(info, 0, 0); /* * Set video mode according to platform data. diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c index 1820c4a24434..f58a3aae6ea6 100644 --- a/drivers/video/pxafb.c +++ b/drivers/video/pxafb.c @@ -80,7 +80,8 @@ static int pxafb_activate_var(struct fb_var_screeninfo *var, struct pxafb_info *); static void set_ctrlr_state(struct pxafb_info *fbi, u_int state); -static void setup_base_frame(struct pxafb_info *fbi, int branch); +static void setup_base_frame(struct pxafb_info *fbi, + struct fb_var_screeninfo *var, int branch); static int setup_frame_dma(struct pxafb_info *fbi, int dma, int pal, unsigned long offset, size_t size); @@ -397,6 +398,7 @@ static void pxafb_setmode(struct fb_var_screeninfo *var, var->lower_margin = mode->lower_margin; var->sync = mode->sync; var->grayscale = mode->cmap_greyscale; + var->transp.length = mode->transparency; /* set the initial RGBA bitfields */ pxafb_set_pixfmt(var, mode->depth); @@ -531,12 +533,22 @@ static int pxafb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info) { struct pxafb_info *fbi = (struct pxafb_info *)info; + struct fb_var_screeninfo newvar; int dma = DMA_MAX + DMA_BASE; if (fbi->state != C_ENABLE) return 0; - setup_base_frame(fbi, 1); + /* Only take .xoffset, .yoffset and .vmode & FB_VMODE_YWRAP from what + * was passed in and copy the rest from the old screeninfo. + */ + memcpy(&newvar, &fbi->fb.var, sizeof(newvar)); + newvar.xoffset = var->xoffset; + newvar.yoffset = var->yoffset; + newvar.vmode &= ~FB_VMODE_YWRAP; + newvar.vmode |= var->vmode & FB_VMODE_YWRAP; + + setup_base_frame(fbi, &newvar, 1); if (fbi->lccr0 & LCCR0_SDS) lcd_writel(fbi, FBR1, fbi->fdadr[dma + 1] | 0x1); @@ -1052,9 +1064,10 @@ static int setup_frame_dma(struct pxafb_info *fbi, int dma, int pal, return 0; } -static void setup_base_frame(struct pxafb_info *fbi, int branch) +static void setup_base_frame(struct pxafb_info *fbi, + struct fb_var_screeninfo *var, + int branch) { - struct fb_var_screeninfo *var = &fbi->fb.var; struct fb_fix_screeninfo *fix = &fbi->fb.fix; int nbytes, dma, pal, bpp = var->bits_per_pixel; unsigned long offset; @@ -1332,7 +1345,7 @@ static int pxafb_activate_var(struct fb_var_screeninfo *var, #endif setup_parallel_timing(fbi, var); - setup_base_frame(fbi, 0); + setup_base_frame(fbi, var, 0); fbi->reg_lccr0 = fbi->lccr0 | (LCCR0_LDM | LCCR0_SFM | LCCR0_IUM | LCCR0_EFM | |