diff options
Diffstat (limited to 'drivers')
81 files changed, 6596 insertions, 851 deletions
diff --git a/drivers/accessibility/braille/braille_console.c b/drivers/accessibility/braille/braille_console.c index d672cfe7ca59..cb423f5aef24 100644 --- a/drivers/accessibility/braille/braille_console.c +++ b/drivers/accessibility/braille/braille_console.c @@ -21,7 +21,6 @@ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ -#include <linux/autoconf.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/moduleparam.h> diff --git a/drivers/hid/hid-lg.h b/drivers/hid/hid-lg.h index 27ae750ca878..bf31592eaf79 100644 --- a/drivers/hid/hid-lg.h +++ b/drivers/hid/hid-lg.h @@ -1,8 +1,6 @@ #ifndef __HID_LG_H #define __HID_LG_H -#include <linux/autoconf.h> - #ifdef CONFIG_LOGITECH_FF int lgff_init(struct hid_device *hdev); #else diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 95ccbe377f9c..bf28945c610d 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -998,6 +998,23 @@ config SENSORS_LIS3_SPI will be called lis3lv02d and a specific module for the SPI transport is called lis3lv02d_spi. +config SENSORS_LIS3_I2C + tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer (I2C)" + depends on I2C && INPUT + select INPUT_POLLDEV + default n + help + This driver provides support for the LIS3LV02Dx accelerometer connected + via I2C. The accelerometer data is readable via + /sys/devices/platform/lis3lv02d. + + This driver also provides an absolute input class device, allowing + the device to act as a pinball machine-esque joystick. + + This driver can also be built as modules. If so, the core module + will be called lis3lv02d and a specific module for the I2C transport + is called lis3lv02d_i2c. + config SENSORS_APPLESMC tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)" depends on INPUT && X86 diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index 33c2ee105284..4131e253f96a 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -55,6 +55,7 @@ obj-$(CONFIG_SENSORS_IT87) += it87.o obj-$(CONFIG_SENSORS_K8TEMP) += k8temp.o obj-$(CONFIG_SENSORS_LIS3LV02D) += lis3lv02d.o hp_accel.o obj-$(CONFIG_SENSORS_LIS3_SPI) += lis3lv02d.o lis3lv02d_spi.o +obj-$(CONFIG_SENSORS_LIS3_I2C) += lis3lv02d.o lis3lv02d_i2c.o obj-$(CONFIG_SENSORS_LM63) += lm63.o obj-$(CONFIG_SENSORS_LM70) += lm70.o obj-$(CONFIG_SENSORS_LM73) += lm73.o diff --git a/drivers/hwmon/lis3lv02d_i2c.c b/drivers/hwmon/lis3lv02d_i2c.c new file mode 100644 index 000000000000..dc1f5402c1d7 --- /dev/null +++ b/drivers/hwmon/lis3lv02d_i2c.c @@ -0,0 +1,183 @@ +/* + * drivers/hwmon/lis3lv02d_i2c.c + * + * Implements I2C interface for lis3lv02d (STMicroelectronics) accelerometer. + * Driver is based on corresponding SPI driver written by Daniel Mack + * (lis3lv02d_spi.c (C) 2009 Daniel Mack <daniel@caiaq.de> ). + * + * Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies). + * + * Contact: Samu Onkalo <samu.p.onkalo@nokia.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/err.h> +#include <linux/i2c.h> +#include "lis3lv02d.h" + +#define DRV_NAME "lis3lv02d_i2c" + +static inline s32 lis3_i2c_write(struct lis3lv02d *lis3, int reg, u8 value) +{ + struct i2c_client *c = lis3->bus_priv; + return i2c_smbus_write_byte_data(c, reg, value); +} + +static inline s32 lis3_i2c_read(struct lis3lv02d *lis3, int reg, u8 *v) +{ + struct i2c_client *c = lis3->bus_priv; + *v = i2c_smbus_read_byte_data(c, reg); + return 0; +} + +static int lis3_i2c_init(struct lis3lv02d *lis3) +{ + u8 reg; + int ret; + + /* power up the device */ + ret = lis3->read(lis3, CTRL_REG1, ®); + if (ret < 0) + return ret; + + reg |= CTRL1_PD0; + return lis3->write(lis3, CTRL_REG1, reg); +} + +/* Default axis mapping but it can be overwritten by platform data */ +static struct axis_conversion lis3lv02d_axis_map = { LIS3_DEV_X, + LIS3_DEV_Y, + LIS3_DEV_Z }; + +static int __devinit lis3lv02d_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + int ret = 0; + struct lis3lv02d_platform_data *pdata = client->dev.platform_data; + + if (pdata) { + if (pdata->axis_x) + lis3lv02d_axis_map.x = pdata->axis_x; + + if (pdata->axis_y) + lis3lv02d_axis_map.y = pdata->axis_y; + + if (pdata->axis_z) + lis3lv02d_axis_map.z = pdata->axis_z; + + if (pdata->setup_resources) + ret = pdata->setup_resources(); + + if (ret) + goto fail; + } + + lis3_dev.pdata = pdata; + lis3_dev.bus_priv = client; + lis3_dev.init = lis3_i2c_init; + lis3_dev.read = lis3_i2c_read; + lis3_dev.write = lis3_i2c_write; + lis3_dev.irq = client->irq; + lis3_dev.ac = lis3lv02d_axis_map; + + i2c_set_clientdata(client, &lis3_dev); + ret = lis3lv02d_init_device(&lis3_dev); +fail: + return ret; +} + +static int __devexit lis3lv02d_i2c_remove(struct i2c_client *client) +{ + struct lis3lv02d *lis3 = i2c_get_clientdata(client); + struct lis3lv02d_platform_data *pdata = client->dev.platform_data; + + if (pdata && pdata->release_resources) + pdata->release_resources(); + + lis3lv02d_joystick_disable(); + lis3lv02d_poweroff(lis3); + + return lis3lv02d_remove_fs(&lis3_dev); +} + +#ifdef CONFIG_PM +static int lis3lv02d_i2c_suspend(struct i2c_client *client, pm_message_t mesg) +{ + struct lis3lv02d *lis3 = i2c_get_clientdata(client); + + if (!lis3->pdata->wakeup_flags) + lis3lv02d_poweroff(lis3); + return 0; +} + +static int lis3lv02d_i2c_resume(struct i2c_client *client) +{ + struct lis3lv02d *lis3 = i2c_get_clientdata(client); + + if (!lis3->pdata->wakeup_flags) + lis3lv02d_poweron(lis3); + return 0; +} + +static void lis3lv02d_i2c_shutdown(struct i2c_client *client) +{ + lis3lv02d_i2c_suspend(client, PMSG_SUSPEND); +} +#else +#define lis3lv02d_i2c_suspend NULL +#define lis3lv02d_i2c_resume NULL +#define lis3lv02d_i2c_shutdown NULL +#endif + +static const struct i2c_device_id lis3lv02d_id[] = { + {"lis3lv02d", 0 }, + {} +}; + +MODULE_DEVICE_TABLE(i2c, lis3lv02d_id); + +static struct i2c_driver lis3lv02d_i2c_driver = { + .driver = { + .name = DRV_NAME, + .owner = THIS_MODULE, + }, + .suspend = lis3lv02d_i2c_suspend, + .shutdown = lis3lv02d_i2c_shutdown, + .resume = lis3lv02d_i2c_resume, + .probe = lis3lv02d_i2c_probe, + .remove = __devexit_p(lis3lv02d_i2c_remove), + .id_table = lis3lv02d_id, +}; + +static int __init lis3lv02d_init(void) +{ + return i2c_add_driver(&lis3lv02d_i2c_driver); +} + +static void __exit lis3lv02d_exit(void) +{ + i2c_del_driver(&lis3lv02d_i2c_driver); +} + +MODULE_AUTHOR("Nokia Corporation"); +MODULE_DESCRIPTION("lis3lv02d I2C interface"); +MODULE_LICENSE("GPL"); + +module_init(lis3lv02d_init); +module_exit(lis3lv02d_exit); diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig index e4f599f20e38..8a0e1ec95e4a 100644 --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig @@ -229,6 +229,12 @@ config LEDS_PWM help This option enables support for pwm driven LEDs +config LEDS_REGULATOR + tristate "REGULATOR driven LED support" + depends on LEDS_CLASS && REGULATOR + help + This option enables support for regulator driven LEDs. + config LEDS_BD2802 tristate "LED driver for BD2802 RGB LED" depends on LEDS_CLASS && I2C @@ -236,6 +242,33 @@ config LEDS_BD2802 This option enables support for BD2802GU RGB LED driver chips accessed via the I2C bus. +config LEDS_INTEL_SS4200 + tristate "LED driver for Intel NAS SS4200 series" + depends on LEDS_CLASS && PCI && DMI + help + This option enables support for the Intel SS4200 series of + Network Attached Storage servers. You may control the hard + drive or power LEDs on the front panel. Using this driver + can stop the front LED from blinking after startup. + +config LEDS_LT3593 + tristate "LED driver for LT3593 controllers" + depends on LEDS_CLASS && GENERIC_GPIO + help + This option enables support for LEDs driven by a Linear Technology + LT3593 controller. This controller uses a special one-wire pulse + coding protocol to set the brightness. + +config LEDS_ADP5520 + tristate "LED Support for ADP5520/ADP5501 PMIC" + depends on LEDS_CLASS && PMIC_ADP5520 + help + This option enables support for on-chip LED drivers found + on Analog Devices ADP5520/ADP5501 PMICs. + + To compile this driver as a module, choose M here: the module will + be called leds-adp5520. + comment "LED Triggers" config LEDS_TRIGGERS diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile index 46d72704d606..9e63869d7c0d 100644 --- a/drivers/leds/Makefile +++ b/drivers/leds/Makefile @@ -29,6 +29,10 @@ obj-$(CONFIG_LEDS_DA903X) += leds-da903x.o obj-$(CONFIG_LEDS_WM831X_STATUS) += leds-wm831x-status.o obj-$(CONFIG_LEDS_WM8350) += leds-wm8350.o obj-$(CONFIG_LEDS_PWM) += leds-pwm.o +obj-$(CONFIG_LEDS_REGULATOR) += leds-regulator.o +obj-$(CONFIG_LEDS_INTEL_SS4200) += leds-ss4200.o +obj-$(CONFIG_LEDS_LT3593) += leds-lt3593.o +obj-$(CONFIG_LEDS_ADP5520) += leds-adp5520.o # LED SPI Drivers obj-$(CONFIG_LEDS_DAC124S085) += leds-dac124s085.o diff --git a/drivers/leds/leds-adp5520.c b/drivers/leds/leds-adp5520.c new file mode 100644 index 000000000000..a8f315902131 --- /dev/null +++ b/drivers/leds/leds-adp5520.c @@ -0,0 +1,230 @@ +/* + * LEDs driver for Analog Devices ADP5520/ADP5501 MFD PMICs + * + * Copyright 2009 Analog Devices Inc. + * + * Loosely derived from leds-da903x: + * Copyright (C) 2008 Compulab, Ltd. + * Mike Rapoport <mike@compulab.co.il> + * + * Copyright (C) 2006-2008 Marvell International Ltd. + * Eric Miao <eric.miao@marvell.com> + * + * Licensed under the GPL-2 or later. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/leds.h> +#include <linux/workqueue.h> +#include <linux/mfd/adp5520.h> + +struct adp5520_led { + struct led_classdev cdev; + struct work_struct work; + struct device *master; + enum led_brightness new_brightness; + int id; + int flags; +}; + +static void adp5520_led_work(struct work_struct *work) +{ + struct adp5520_led *led = container_of(work, struct adp5520_led, work); + adp5520_write(led->master, ADP5520_LED1_CURRENT + led->id - 1, + led->new_brightness >> 2); +} + +static void adp5520_led_set(struct led_classdev *led_cdev, + enum led_brightness value) +{ + struct adp5520_led *led; + + led = container_of(led_cdev, struct adp5520_led, cdev); + led->new_brightness = value; + schedule_work(&led->work); +} + +static int adp5520_led_setup(struct adp5520_led *led) +{ + struct device *dev = led->master; + int flags = led->flags; + int ret = 0; + + switch (led->id) { + case FLAG_ID_ADP5520_LED1_ADP5501_LED0: + ret |= adp5520_set_bits(dev, ADP5520_LED_TIME, + (flags >> ADP5520_FLAG_OFFT_SHIFT) & + ADP5520_FLAG_OFFT_MASK); + ret |= adp5520_set_bits(dev, ADP5520_LED_CONTROL, + ADP5520_LED1_EN); + break; + case FLAG_ID_ADP5520_LED2_ADP5501_LED1: + ret |= adp5520_set_bits(dev, ADP5520_LED_TIME, + ((flags >> ADP5520_FLAG_OFFT_SHIFT) & + ADP5520_FLAG_OFFT_MASK) << 2); + ret |= adp5520_clr_bits(dev, ADP5520_LED_CONTROL, + ADP5520_R3_MODE); + ret |= adp5520_set_bits(dev, ADP5520_LED_CONTROL, + ADP5520_LED2_EN); + break; + case FLAG_ID_ADP5520_LED3_ADP5501_LED2: + ret |= adp5520_set_bits(dev, ADP5520_LED_TIME, + ((flags >> ADP5520_FLAG_OFFT_SHIFT) & + ADP5520_FLAG_OFFT_MASK) << 4); + ret |= adp5520_clr_bits(dev, ADP5520_LED_CONTROL, + ADP5520_C3_MODE); + ret |= adp5520_set_bits(dev, ADP5520_LED_CONTROL, + ADP5520_LED3_EN); + break; + } + + return ret; +} + +static int __devinit adp5520_led_prepare(struct platform_device *pdev) +{ + struct adp5520_leds_platform_data *pdata = pdev->dev.platform_data; + struct device *dev = pdev->dev.parent; + int ret = 0; + + ret |= adp5520_write(dev, ADP5520_LED1_CURRENT, 0); + ret |= adp5520_write(dev, ADP5520_LED2_CURRENT, 0); + ret |= adp5520_write(dev, ADP5520_LED3_CURRENT, 0); + ret |= adp5520_write(dev, ADP5520_LED_TIME, pdata->led_on_time << 6); + ret |= adp5520_write(dev, ADP5520_LED_FADE, FADE_VAL(pdata->fade_in, + pdata->fade_out)); + + return ret; +} + +static int __devinit adp5520_led_probe(struct platform_device *pdev) +{ + struct adp5520_leds_platform_data *pdata = pdev->dev.platform_data; + struct adp5520_led *led, *led_dat; + struct led_info *cur_led; + int ret, i; + + if (pdata == NULL) { + dev_err(&pdev->dev, "missing platform data\n"); + return -ENODEV; + } + + if (pdata->num_leds > ADP5520_01_MAXLEDS) { + dev_err(&pdev->dev, "can't handle more than %d LEDS\n", + ADP5520_01_MAXLEDS); + return -EFAULT; + } + + led = kzalloc(sizeof(*led) * pdata->num_leds, GFP_KERNEL); + if (led == NULL) { + dev_err(&pdev->dev, "failed to alloc memory\n"); + return -ENOMEM; + } + + ret = adp5520_led_prepare(pdev); + + if (ret) { + dev_err(&pdev->dev, "failed to write\n"); + goto err_free; + } + + for (i = 0; i < pdata->num_leds; ++i) { + cur_led = &pdata->leds[i]; + led_dat = &led[i]; + + led_dat->cdev.name = cur_led->name; + led_dat->cdev.default_trigger = cur_led->default_trigger; + led_dat->cdev.brightness_set = adp5520_led_set; + led_dat->cdev.brightness = LED_OFF; + + if (cur_led->flags & ADP5520_FLAG_LED_MASK) + led_dat->flags = cur_led->flags; + else + led_dat->flags = i + 1; + + led_dat->id = led_dat->flags & ADP5520_FLAG_LED_MASK; + + led_dat->master = pdev->dev.parent; + led_dat->new_brightness = LED_OFF; + + INIT_WORK(&led_dat->work, adp5520_led_work); + + ret = led_classdev_register(led_dat->master, &led_dat->cdev); + if (ret) { + dev_err(&pdev->dev, "failed to register LED %d\n", + led_dat->id); + goto err; + } + + ret = adp5520_led_setup(led_dat); + if (ret) { + dev_err(&pdev->dev, "failed to write\n"); + i++; + goto err; + } + } + + platform_set_drvdata(pdev, led); + return 0; + +err: + if (i > 0) { + for (i = i - 1; i >= 0; i--) { + led_classdev_unregister(&led[i].cdev); + cancel_work_sync(&led[i].work); + } + } + +err_free: + kfree(led); + return ret; +} + +static int __devexit adp5520_led_remove(struct platform_device *pdev) +{ + struct adp5520_leds_platform_data *pdata = pdev->dev.platform_data; + struct adp5520_led *led; + int i; + + led = platform_get_drvdata(pdev); + + adp5520_clr_bits(led->master, ADP5520_LED_CONTROL, + ADP5520_LED1_EN | ADP5520_LED2_EN | ADP5520_LED3_EN); + + for (i = 0; i < pdata->num_leds; i++) { + led_classdev_unregister(&led[i].cdev); + cancel_work_sync(&led[i].work); + } + + kfree(led); + return 0; +} + +static struct platform_driver adp5520_led_driver = { + .driver = { + .name = "adp5520-led", + .owner = THIS_MODULE, + }, + .probe = adp5520_led_probe, + .remove = __devexit_p(adp5520_led_remove), +}; + +static int __init adp5520_led_init(void) +{ + return platform_driver_register(&adp5520_led_driver); +} +module_init(adp5520_led_init); + +static void __exit adp5520_led_exit(void) +{ + platform_driver_unregister(&adp5520_led_driver); +} +module_exit(adp5520_led_exit); + +MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>"); +MODULE_DESCRIPTION("LEDS ADP5520(01) Driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:adp5520-led"); diff --git a/drivers/leds/leds-alix2.c b/drivers/leds/leds-alix2.c index 731d4eef3425..f59ffadf5125 100644 --- a/drivers/leds/leds-alix2.c +++ b/drivers/leds/leds-alix2.c @@ -11,11 +11,24 @@ #include <linux/module.h> #include <linux/platform_device.h> #include <linux/string.h> +#include <linux/pci.h> static int force = 0; module_param(force, bool, 0444); MODULE_PARM_DESC(force, "Assume system has ALIX.2/ALIX.3 style LEDs"); +#define MSR_LBAR_GPIO 0x5140000C +#define CS5535_GPIO_SIZE 256 + +static u32 gpio_base; + +static struct pci_device_id divil_pci[] = { + { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_CS5535_ISA) }, + { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA) }, + { } /* NULL entry */ +}; +MODULE_DEVICE_TABLE(pci, divil_pci); + struct alix_led { struct led_classdev cdev; unsigned short port; @@ -30,9 +43,9 @@ static void alix_led_set(struct led_classdev *led_cdev, container_of(led_cdev, struct alix_led, cdev); if (brightness) - outl(led_dev->on_value, led_dev->port); + outl(led_dev->on_value, gpio_base + led_dev->port); else - outl(led_dev->off_value, led_dev->port); + outl(led_dev->off_value, gpio_base + led_dev->port); } static struct alix_led alix_leds[] = { @@ -41,7 +54,7 @@ static struct alix_led alix_leds[] = { .name = "alix:1", .brightness_set = alix_led_set, }, - .port = 0x6100, + .port = 0x00, .on_value = 1 << 22, .off_value = 1 << 6, }, @@ -50,7 +63,7 @@ static struct alix_led alix_leds[] = { .name = "alix:2", .brightness_set = alix_led_set, }, - .port = 0x6180, + .port = 0x80, .on_value = 1 << 25, .off_value = 1 << 9, }, @@ -59,7 +72,7 @@ static struct alix_led alix_leds[] = { .name = "alix:3", .brightness_set = alix_led_set, }, - .port = 0x6180, + .port = 0x80, .on_value = 1 << 27, .off_value = 1 << 11, }, @@ -101,64 +114,104 @@ static struct platform_driver alix_led_driver = { }, }; -static int __init alix_present(void) +static int __init alix_present(unsigned long bios_phys, + const char *alix_sig, + size_t alix_sig_len) { - const unsigned long bios_phys = 0x000f0000; const size_t bios_len = 0x00010000; - const char alix_sig[] = "PC Engines ALIX."; - const size_t alix_sig_len = sizeof(alix_sig) - 1; - const char *bios_virt; const char *scan_end; const char *p; - int ret = 0; + char name[64]; if (force) { printk(KERN_NOTICE "%s: forced to skip BIOS test, " "assume system has ALIX.2 style LEDs\n", KBUILD_MODNAME); - ret = 1; - goto out; + return 1; } bios_virt = phys_to_virt(bios_phys); scan_end = bios_virt + bios_len - (alix_sig_len + 2); for (p = bios_virt; p < scan_end; p++) { const char *tail; + char *a; - if (memcmp(p, alix_sig, alix_sig_len) != 0) { + if (memcmp(p, alix_sig, alix_sig_len) != 0) continue; - } + + memcpy(name, p, sizeof(name)); + + /* remove the first \0 character from string */ + a = strchr(name, '\0'); + if (a) + *a = ' '; + + /* cut the string at a newline */ + a = strchr(name, '\r'); + if (a) + *a = '\0'; tail = p + alix_sig_len; - if ((tail[0] == '2' || tail[0] == '3') && tail[1] == '\0') { + if ((tail[0] == '2' || tail[0] == '3')) { printk(KERN_INFO "%s: system is recognized as \"%s\"\n", - KBUILD_MODNAME, p); - ret = 1; - break; + KBUILD_MODNAME, name); + return 1; } } -out: - return ret; + return 0; } static struct platform_device *pdev; -static int __init alix_led_init(void) +static int __init alix_pci_led_init(void) { - int ret; + u32 low, hi; - if (!alix_present()) { - ret = -ENODEV; - goto out; + if (pci_dev_present(divil_pci) == 0) { + printk(KERN_WARNING KBUILD_MODNAME": DIVIL not found\n"); + return -ENODEV; } - /* enable output on GPIO for LED 1,2,3 */ - outl(1 << 6, 0x6104); - outl(1 << 9, 0x6184); - outl(1 << 11, 0x6184); + /* Grab the GPIO I/O range */ + rdmsr(MSR_LBAR_GPIO, low, hi); + + /* Check the mask and whether GPIO is enabled (sanity check) */ + if (hi != 0x0000f001) { + printk(KERN_WARNING KBUILD_MODNAME": GPIO not enabled\n"); + return -ENODEV; + } + + /* Mask off the IO base address */ + gpio_base = low & 0x0000ff00; + + if (!request_region(gpio_base, CS5535_GPIO_SIZE, KBUILD_MODNAME)) { + printk(KERN_ERR KBUILD_MODNAME": can't allocate I/O for GPIO\n"); + return -ENODEV; + } + + /* Set GPIO function to output */ + outl(1 << 6, gpio_base + 0x04); + outl(1 << 9, gpio_base + 0x84); + outl(1 << 11, gpio_base + 0x84); + + return 0; +} + +static int __init alix_led_init(void) +{ + int ret = -ENODEV; + const char tinybios_sig[] = "PC Engines ALIX."; + const char coreboot_sig[] = "PC Engines\0ALIX."; + + if (alix_present(0xf0000, tinybios_sig, sizeof(tinybios_sig) - 1) || + alix_present(0x500, coreboot_sig, sizeof(coreboot_sig) - 1)) + ret = alix_pci_led_init(); + + if (ret < 0) + return ret; pdev = platform_device_register_simple(KBUILD_MODNAME, -1, NULL, 0); if (!IS_ERR(pdev)) { @@ -168,7 +221,6 @@ static int __init alix_led_init(void) } else ret = PTR_ERR(pdev); -out: return ret; } @@ -176,6 +228,7 @@ static void __exit alix_led_exit(void) { platform_device_unregister(pdev); platform_driver_unregister(&alix_led_driver); + release_region(gpio_base, CS5535_GPIO_SIZE); } module_init(alix_led_init); diff --git a/drivers/leds/leds-cobalt-qube.c b/drivers/leds/leds-cobalt-qube.c index 8816806accd2..da5fb016b1a5 100644 --- a/drivers/leds/leds-cobalt-qube.c +++ b/drivers/leds/leds-cobalt-qube.c @@ -31,7 +31,7 @@ static struct led_classdev qube_front_led = { .name = "qube::front", .brightness = LED_FULL, .brightness_set = qube_front_led_set, - .default_trigger = "ide-disk", + .default_trigger = "default-on", }; static int __devinit cobalt_qube_led_probe(struct platform_device *pdev) @@ -43,7 +43,7 @@ static int __devinit cobalt_qube_led_probe(struct platform_device *pdev) if (!res) return -EBUSY; - led_port = ioremap(res->start, res->end - res->start + 1); + led_port = ioremap(res->start, resource_size(res)); if (!led_port) return -ENOMEM; diff --git a/drivers/leds/leds-cobalt-raq.c b/drivers/leds/leds-cobalt-raq.c index defc212105f3..438d48384636 100644 --- a/drivers/leds/leds-cobalt-raq.c +++ b/drivers/leds/leds-cobalt-raq.c @@ -84,7 +84,7 @@ static int __devinit cobalt_raq_led_probe(struct platform_device *pdev) if (!res) return -EBUSY; - led_port = ioremap(res->start, res->end - res->start + 1); + led_port = ioremap(res->start, resource_size(res)); if (!led_port) return -ENOMEM; diff --git a/drivers/leds/leds-lt3593.c b/drivers/leds/leds-lt3593.c new file mode 100644 index 000000000000..fee40a841959 --- /dev/null +++ b/drivers/leds/leds-lt3593.c @@ -0,0 +1,217 @@ +/* + * LEDs driver for LT3593 controllers + * + * See the datasheet at http://cds.linear.com/docs/Datasheet/3593f.pdf + * + * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de> + * + * Based on leds-gpio.c, + * + * Copyright (C) 2007 8D Technologies inc. + * Raphael Assenat <raph@8d.com> + * Copyright (C) 2008 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/leds.h> +#include <linux/workqueue.h> +#include <linux/delay.h> +#include <linux/gpio.h> + +struct lt3593_led_data { + struct led_classdev cdev; + unsigned gpio; + struct work_struct work; + u8 new_level; +}; + +static void lt3593_led_work(struct work_struct *work) +{ + int pulses; + struct lt3593_led_data *led_dat = + container_of(work, struct lt3593_led_data, work); + + /* + * The LT3593 resets its internal current level register to the maximum + * level on the first falling edge on the control pin. Each following + * falling edge decreases the current level by 625uA. Up to 32 pulses + * can be sent, so the maximum power reduction is 20mA. + * After a timeout of 128us, the value is taken from the register and + * applied is to the output driver. + */ + + if (led_dat->new_level == 0) { + gpio_set_value_cansleep(led_dat->gpio, 0); + return; + } + + pulses = 32 - (led_dat->new_level * 32) / 255; + + if (pulses == 0) { + gpio_set_value_cansleep(led_dat->gpio, 0); + mdelay(1); + gpio_set_value_cansleep(led_dat->gpio, 1); + return; + } + + gpio_set_value_cansleep(led_dat->gpio, 1); + + while (pulses--) { + gpio_set_value_cansleep(led_dat->gpio, 0); + udelay(1); + gpio_set_value_cansleep(led_dat->gpio, 1); + udelay(1); + } +} + +static void lt3593_led_set(struct led_classdev *led_cdev, + enum led_brightness value) +{ + struct lt3593_led_data *led_dat = + container_of(led_cdev, struct lt3593_led_data, cdev); + + led_dat->new_level = value; + schedule_work(&led_dat->work); +} + +static int __devinit create_lt3593_led(const struct gpio_led *template, + struct lt3593_led_data *led_dat, struct device *parent) +{ + int ret, state; + + /* skip leds on GPIOs that aren't available */ + if (!gpio_is_valid(template->gpio)) { + printk(KERN_INFO "%s: skipping unavailable LT3593 LED at gpio %d (%s)\n", + KBUILD_MODNAME, template->gpio, template->name); + return 0; + } + + ret = gpio_request(template->gpio, template->name); + if (ret < 0) + return ret; + + led_dat->cdev.name = template->name; + led_dat->cdev.default_trigger = template->default_trigger; + led_dat->gpio = template->gpio; + + led_dat->cdev.brightness_set = lt3593_led_set; + + state = (template->default_state == LEDS_GPIO_DEFSTATE_ON); + led_dat->cdev.brightness = state ? LED_FULL : LED_OFF; + + if (!template->retain_state_suspended) + led_dat->cdev.flags |= LED_CORE_SUSPENDRESUME; + + ret = gpio_direction_output(led_dat->gpio, state); + if (ret < 0) + goto err; + + INIT_WORK(&led_dat->work, lt3593_led_work); + + ret = led_classdev_register(parent, &led_dat->cdev); + if (ret < 0) + goto err; + + printk(KERN_INFO "%s: registered LT3593 LED '%s' at GPIO %d\n", + KBUILD_MODNAME, template->name, template->gpio); + + return 0; + +err: + gpio_free(led_dat->gpio); + return ret; +} + +static void delete_lt3593_led(struct lt3593_led_data *led) +{ + if (!gpio_is_valid(led->gpio)) + return; + + led_classdev_unregister(&led->cdev); + cancel_work_sync(&led->work); + gpio_free(led->gpio); +} + +static int __devinit lt3593_led_probe(struct platform_device *pdev) +{ + struct gpio_led_platform_data *pdata = pdev->dev.platform_data; + struct lt3593_led_data *leds_data; + int i, ret = 0; + + if (!pdata) + return -EBUSY; + + leds_data = kzalloc(sizeof(struct lt3593_led_data) * pdata->num_leds, + GFP_KERNEL); + if (!leds_data) + return -ENOMEM; + + for (i = 0; i < pdata->num_leds; i++) { + ret = create_lt3593_led(&pdata->leds[i], &leds_data[i], + &pdev->dev); + if (ret < 0) + goto err; + } + + platform_set_drvdata(pdev, leds_data); + + return 0; + +err: + for (i = i - 1; i >= 0; i--) + delete_lt3593_led(&leds_data[i]); + + kfree(leds_data); + + return ret; +} + +static int __devexit lt3593_led_remove(struct platform_device *pdev) +{ + int i; + struct gpio_led_platform_data *pdata = pdev->dev.platform_data; + struct lt3593_led_data *leds_data; + + leds_data = platform_get_drvdata(pdev); + + for (i = 0; i < pdata->num_leds; i++) + delete_lt3593_led(&leds_data[i]); + + kfree(leds_data); + + return 0; +} + +static struct platform_driver lt3593_led_driver = { + .probe = lt3593_led_probe, + .remove = __devexit_p(lt3593_led_remove), + .driver = { + .name = "leds-lt3593", + .owner = THIS_MODULE, + }, +}; + +MODULE_ALIAS("platform:leds-lt3593"); + +static int __init lt3593_led_init(void) +{ + return platform_driver_register(<3593_led_driver); +} + +static void __exit lt3593_led_exit(void) +{ + platform_driver_unregister(<3593_led_driver); +} + +module_init(lt3593_led_init); +module_exit(lt3593_led_exit); + +MODULE_AUTHOR("Daniel Mack <daniel@caiaq.de>"); +MODULE_DESCRIPTION("LED driver for LT3593 controllers"); +MODULE_LICENSE("GPL"); diff --git a/drivers/leds/leds-pwm.c b/drivers/leds/leds-pwm.c index cdfdc8714e10..88b1dd091cfb 100644 --- a/drivers/leds/leds-pwm.c +++ b/drivers/leds/leds-pwm.c @@ -27,7 +27,6 @@ struct led_pwm_data { struct pwm_device *pwm; unsigned int active_low; unsigned int period; - unsigned int max_brightness; }; static void led_pwm_set(struct led_classdev *led_cdev, @@ -35,7 +34,7 @@ static void led_pwm_set(struct led_classdev *led_cdev, { struct led_pwm_data *led_dat = container_of(led_cdev, struct led_pwm_data, cdev); - unsigned int max = led_dat->max_brightness; + unsigned int max = led_dat->cdev.max_brightness; unsigned int period = led_dat->period; if (brightness == 0) { @@ -77,10 +76,10 @@ static int led_pwm_probe(struct platform_device *pdev) led_dat->cdev.name = cur_led->name; led_dat->cdev.default_trigger = cur_led->default_trigger; led_dat->active_low = cur_led->active_low; - led_dat->max_brightness = cur_led->max_brightness; led_dat->period = cur_led->pwm_period_ns; led_dat->cdev.brightness_set = led_pwm_set; led_dat->cdev.brightness = LED_OFF; + led_dat->cdev.max_brightness = cur_led->max_brightness; led_dat->cdev.flags |= LED_CORE_SUSPENDRESUME; ret = led_classdev_register(&pdev->dev, &led_dat->cdev); diff --git a/drivers/leds/leds-regulator.c b/drivers/leds/leds-regulator.c new file mode 100644 index 000000000000..7f00de3ef922 --- /dev/null +++ b/drivers/leds/leds-regulator.c @@ -0,0 +1,242 @@ +/* + * leds-regulator.c - LED class driver for regulator driven LEDs. + * + * Copyright (C) 2009 Antonio Ospite <ospite@studenti.unina.it> + * + * Inspired by leds-wm8350 driver. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/module.h> +#include <linux/err.h> +#include <linux/workqueue.h> +#include <linux/leds.h> +#include <linux/leds-regulator.h> +#include <linux/platform_device.h> +#include <linux/regulator/consumer.h> + +#define to_regulator_led(led_cdev) \ + container_of(led_cdev, struct regulator_led, cdev) + +struct regulator_led { + struct led_classdev cdev; + enum led_brightness value; + int enabled; + struct mutex mutex; + struct work_struct work; + + struct regulator *vcc; +}; + +static inline int led_regulator_get_max_brightness(struct regulator *supply) +{ + int ret; + int voltage = regulator_list_voltage(supply, 0); + + if (voltage <= 0) + return 1; + + /* even if regulator can't change voltages, + * we still assume it can change status + * and the LED can be turned on and off. + */ + ret = regulator_set_voltage(supply, voltage, voltage); + if (ret < 0) + return 1; + + return regulator_count_voltages(supply); +} + +static int led_regulator_get_voltage(struct regulator *supply, + enum led_brightness brightness) +{ + if (brightness == 0) + return -EINVAL; + + return regulator_list_voltage(supply, brightness - 1); +} + + +static void regulator_led_enable(struct regulator_led *led) +{ + int ret; + + if (led->enabled) + return; + + ret = regulator_enable(led->vcc); + if (ret != 0) { + dev_err(led->cdev.dev, "Failed to enable vcc: %d\n", ret); + return; + } + + led->enabled = 1; +} + +static void regulator_led_disable(struct regulator_led *led) +{ + int ret; + + if (!led->enabled) + return; + + ret = regulator_disable(led->vcc); + if (ret != 0) { + dev_err(led->cdev.dev, "Failed to disable vcc: %d\n", ret); + return; + } + + led->enabled = 0; +} + +static void regulator_led_set_value(struct regulator_led *led) +{ + int voltage; + int ret; + + mutex_lock(&led->mutex); + + if (led->value == LED_OFF) { + regulator_led_disable(led); + goto out; + } + + if (led->cdev.max_brightness > 1) { + voltage = led_regulator_get_voltage(led->vcc, led->value); + dev_dbg(led->cdev.dev, "brightness: %d voltage: %d\n", + led->value, voltage); + + ret = regulator_set_voltage(led->vcc, voltage, voltage); + if (ret != 0) + dev_err(led->cdev.dev, "Failed to set voltage %d: %d\n", + voltage, ret); + } + + regulator_led_enable(led); + +out: + mutex_unlock(&led->mutex); +} + +static void led_work(struct work_struct *work) +{ + struct regulator_led *led; + + led = container_of(work, struct regulator_led, work); + regulator_led_set_value(led); +} + +static void regulator_led_brightness_set(struct led_classdev *led_cdev, + enum led_brightness value) +{ + struct regulator_led *led = to_regulator_led(led_cdev); + + led->value = value; + schedule_work(&led->work); +} + +static int __devinit regulator_led_probe(struct platform_device *pdev) +{ + struct led_regulator_platform_data *pdata = pdev->dev.platform_data; + struct regulator_led *led; + struct regulator *vcc; + int ret = 0; + + if (pdata == NULL) { + dev_err(&pdev->dev, "no platform data\n"); + return -ENODEV; + } + + vcc = regulator_get_exclusive(&pdev->dev, "vled"); + if (IS_ERR(vcc)) { + dev_err(&pdev->dev, "Cannot get vcc for %s\n", pdata->name); + return PTR_ERR(vcc); + } + + led = kzalloc(sizeof(*led), GFP_KERNEL); + if (led == NULL) { + ret = -ENOMEM; + goto err_vcc; + } + + led->cdev.max_brightness = led_regulator_get_max_brightness(vcc); + if (pdata->brightness > led->cdev.max_brightness) { + dev_err(&pdev->dev, "Invalid default brightness %d\n", + pdata->brightness); + ret = -EINVAL; + goto err_led; + } + led->value = pdata->brightness; + + led->cdev.brightness_set = regulator_led_brightness_set; + led->cdev.name = pdata->name; + led->cdev.flags |= LED_CORE_SUSPENDRESUME; + led->vcc = vcc; + + mutex_init(&led->mutex); + INIT_WORK(&led->work, led_work); + + platform_set_drvdata(pdev, led); + + ret = led_classdev_register(&pdev->dev, &led->cdev); + if (ret < 0) { + cancel_work_sync(&led->work); + goto err_led; + } + + /* to expose the default value to userspace */ + led->cdev.brightness = led->value; + + /* Set the default led status */ + regulator_led_set_value(led); + + return 0; + +err_led: + kfree(led); +err_vcc: + regulator_put(vcc); + return ret; +} + +static int __devexit regulator_led_remove(struct platform_device *pdev) +{ + struct regulator_led *led = platform_get_drvdata(pdev); + + led_classdev_unregister(&led->cdev); + cancel_work_sync(&led->work); + regulator_led_disable(led); + regulator_put(led->vcc); + kfree(led); + return 0; +} + +static struct platform_driver regulator_led_driver = { + .driver = { + .name = "leds-regulator", + .owner = THIS_MODULE, + }, + .probe = regulator_led_probe, + .remove = __devexit_p(regulator_led_remove), +}; + +static int __init regulator_led_init(void) +{ + return platform_driver_register(®ulator_led_driver); +} +module_init(regulator_led_init); + +static void __exit regulator_led_exit(void) +{ + platform_driver_unregister(®ulator_led_driver); +} +module_exit(regulator_led_exit); + +MODULE_AUTHOR("Antonio Ospite <ospite@studenti.unina.it>"); +MODULE_DESCRIPTION("Regulator driven LED driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:leds-regulator"); diff --git a/drivers/leds/leds-ss4200.c b/drivers/leds/leds-ss4200.c new file mode 100644 index 000000000000..97f04984c1ca --- /dev/null +++ b/drivers/leds/leds-ss4200.c @@ -0,0 +1,556 @@ +/* + * SS4200-E Hardware API + * Copyright (c) 2009, Intel Corporation. + * Copyright IBM Corporation, 2009 + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * + * Author: Dave Hansen <dave@sr71.net> + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/dmi.h> +#include <linux/init.h> +#include <linux/ioport.h> +#include <linux/kernel.h> +#include <linux/leds.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/types.h> +#include <linux/uaccess.h> + +MODULE_AUTHOR("Rodney Girod <rgirod@confocus.com>, Dave Hansen <dave@sr71.net>"); +MODULE_DESCRIPTION("Intel NAS/Home Server ICH7 GPIO Driver"); +MODULE_LICENSE("GPL"); + +/* + * ICH7 LPC/GPIO PCI Config register offsets + */ +#define PMBASE 0x040 +#define GPIO_BASE 0x048 +#define GPIO_CTRL 0x04c +#define GPIO_EN 0x010 + +/* + * The ICH7 GPIO register block is 64 bytes in size. + */ +#define ICH7_GPIO_SIZE 64 + +/* + * Define register offsets within the ICH7 register block. + */ +#define GPIO_USE_SEL 0x000 +#define GP_IO_SEL 0x004 +#define GP_LVL 0x00c +#define GPO_BLINK 0x018 +#define GPI_INV 0x030 +#define GPIO_USE_SEL2 0x034 +#define GP_IO_SEL2 0x038 +#define GP_LVL2 0x03c + +/* + * PCI ID of the Intel ICH7 LPC Device within which the GPIO block lives. + */ +static struct pci_device_id ich7_lpc_pci_id[] = +{ + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_0) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_1) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_30) }, + { } /* NULL entry */ +}; + +MODULE_DEVICE_TABLE(pci, ich7_lpc_pci_id); + +static int __init ss4200_led_dmi_callback(const struct dmi_system_id *id) +{ + pr_info("detected '%s'\n", id->ident); + return 1; +} + +static unsigned int __initdata nodetect; +module_param_named(nodetect, nodetect, bool, 0); +MODULE_PARM_DESC(nodetect, "Skip DMI-based hardware detection"); + +/* + * struct nas_led_whitelist - List of known good models + * + * Contains the known good models this driver is compatible with. + * When adding a new model try to be as strict as possible. This + * makes it possible to keep the false positives (the model is + * detected as working, but in reality it is not) as low as + * possible. + */ +static struct dmi_system_id __initdata nas_led_whitelist[] = { + { + .callback = ss4200_led_dmi_callback, + .ident = "Intel SS4200-E", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Intel"), + DMI_MATCH(DMI_PRODUCT_NAME, "SS4200-E"), + DMI_MATCH(DMI_PRODUCT_VERSION, "1.00.00") + } + }, +}; + +/* + * Base I/O address assigned to the Power Management register block + */ +static u32 g_pm_io_base; + +/* + * Base I/O address assigned to the ICH7 GPIO register block + */ +static u32 nas_gpio_io_base; + +/* + * When we successfully register a region, we are returned a resource. + * We use these to identify which regions we need to release on our way + * back out. + */ +static struct resource *gp_gpio_resource; + +struct nasgpio_led { + char *name; + u32 gpio_bit; + struct led_classdev led_cdev; +}; + +/* + * gpio_bit(s) are the ICH7 GPIO bit assignments + */ +static struct nasgpio_led nasgpio_leds[] = { + { .name = "hdd1:blue:sata", .gpio_bit = 0 }, + { .name = "hdd1:amber:sata", .gpio_bit = 1 }, + { .name = "hdd2:blue:sata", .gpio_bit = 2 }, + { .name = "hdd2:amber:sata", .gpio_bit = 3 }, + { .name = "hdd3:blue:sata", .gpio_bit = 4 }, + { .name = "hdd3:amber:sata", .gpio_bit = 5 }, + { .name = "hdd4:blue:sata", .gpio_bit = 6 }, + { .name = "hdd4:amber:sata", .gpio_bit = 7 }, + { .name = "power:blue:power", .gpio_bit = 27}, + { .name = "power:amber:power", .gpio_bit = 28}, +}; + +#define NAS_RECOVERY 0x00000400 /* GPIO10 */ + +static struct nasgpio_led * +led_classdev_to_nasgpio_led(struct led_classdev *led_cdev) +{ + return container_of(led_cdev, struct nasgpio_led, led_cdev); +} + +static struct nasgpio_led *get_led_named(char *name) +{ + int i; + for (i = 0; i < ARRAY_SIZE(nasgpio_leds); i++) { + if (strcmp(nasgpio_leds[i].name, name)) + continue; + return &nasgpio_leds[i]; + } + return NULL; +} + +/* + * This protects access to the gpio ports. + */ +static DEFINE_SPINLOCK(nasgpio_gpio_lock); + +/* + * There are two gpio ports, one for blinking and the other + * for power. @port tells us if we're doing blinking or + * power control. + * + * Caller must hold nasgpio_gpio_lock + */ +static void __nasgpio_led_set_attr(struct led_classdev *led_cdev, + u32 port, u32 value) +{ + struct nasgpio_led *led = led_classdev_to_nasgpio_led(led_cdev); + u32 gpio_out; + + gpio_out = inl(nas_gpio_io_base + port); + if (value) + gpio_out |= (1<<led->gpio_bit); + else + gpio_out &= ~(1<<led->gpio_bit); + + outl(gpio_out, nas_gpio_io_base + port); +} + +static void nasgpio_led_set_attr(struct led_classdev *led_cdev, + u32 port, u32 value) +{ + spin_lock(&nasgpio_gpio_lock); + __nasgpio_led_set_attr(led_cdev, port, value); + spin_unlock(&nasgpio_gpio_lock); +} + +u32 nasgpio_led_get_attr(struct led_classdev *led_cdev, u32 port) +{ + struct nasgpio_led *led = led_classdev_to_nasgpio_led(led_cdev); + u32 gpio_in; + + spin_lock(&nasgpio_gpio_lock); + gpio_in = inl(nas_gpio_io_base + port); + spin_unlock(&nasgpio_gpio_lock); + if (gpio_in & (1<<led->gpio_bit)) + return 1; + return 0; +} + +/* + * There is actual brightness control in the hardware, + * but it is via smbus commands and not implemented + * in this driver. + */ +static void nasgpio_led_set_brightness(struct led_classdev *led_cdev, + enum led_brightness brightness) +{ + u32 setting = 0; + if (brightness >= LED_HALF) + setting = 1; + /* + * Hold the lock across both operations. This ensures + * consistency so that both the "turn off blinking" + * and "turn light off" operations complete as a set. + */ + spin_lock(&nasgpio_gpio_lock); + /* + * LED class documentation asks that past blink state + * be disabled when brightness is turned to zero. + */ + if (brightness == 0) + __nasgpio_led_set_attr(led_cdev, GPO_BLINK, 0); + __nasgpio_led_set_attr(led_cdev, GP_LVL, setting); + spin_unlock(&nasgpio_gpio_lock); +} + +static int nasgpio_led_set_blink(struct led_classdev *led_cdev, + unsigned long *delay_on, + unsigned long *delay_off) +{ + u32 setting = 1; + if (!(*delay_on == 0 && *delay_off == 0) && + !(*delay_on == 500 && *delay_off == 500)) + return -EINVAL; + /* + * These are very approximate. + */ + *delay_on = 500; + *delay_off = 500; + + nasgpio_led_set_attr(led_cdev, GPO_BLINK, setting); + + return 0; +} + + +/* + * Initialize the ICH7 GPIO registers for NAS usage. The BIOS should have + * already taken care of this, but we will do so in a non destructive manner + * so that we have what we need whether the BIOS did it or not. + */ +static int __devinit ich7_gpio_init(struct device *dev) +{ + int i; + u32 config_data = 0; + u32 all_nas_led = 0; + + for (i = 0; i < ARRAY_SIZE(nasgpio_leds); i++) + all_nas_led |= (1<<nasgpio_leds[i].gpio_bit); + + spin_lock(&nasgpio_gpio_lock); + /* + * We need to enable all of the GPIO lines used by the NAS box, + * so we will read the current Use Selection and add our usage + * to it. This should be benign with regard to the original + * BIOS configuration. + */ + config_data = inl(nas_gpio_io_base + GPIO_USE_SEL); + dev_dbg(dev, ": Data read from GPIO_USE_SEL = 0x%08x\n", config_data); + config_data |= all_nas_led + NAS_RECOVERY; + outl(config_data, nas_gpio_io_base + GPIO_USE_SEL); + config_data = inl(nas_gpio_io_base + GPIO_USE_SEL); + dev_dbg(dev, ": GPIO_USE_SEL = 0x%08x\n\n", config_data); + + /* + * The LED GPIO outputs need to be configured for output, so we + * will ensure that all LED lines are cleared for output and the + * RECOVERY line ready for input. This too should be benign with + * regard to BIOS configuration. + */ + config_data = inl(nas_gpio_io_base + GP_IO_SEL); + dev_dbg(dev, ": Data read from GP_IO_SEL = 0x%08x\n", + config_data); + config_data &= ~all_nas_led; + config_data |= NAS_RECOVERY; + outl(config_data, nas_gpio_io_base + GP_IO_SEL); + config_data = inl(nas_gpio_io_base + GP_IO_SEL); + dev_dbg(dev, ": GP_IO_SEL = 0x%08x\n", config_data); + + /* + * In our final system, the BIOS will initialize the state of all + * of the LEDs. For now, we turn them all off (or Low). + */ + config_data = inl(nas_gpio_io_base + GP_LVL); + dev_dbg(dev, ": Data read from GP_LVL = 0x%08x\n", config_data); + /* + * In our final system, the BIOS will initialize the blink state of all + * of the LEDs. For now, we turn blink off for all of them. + */ + config_data = inl(nas_gpio_io_base + GPO_BLINK); + dev_dbg(dev, ": Data read from GPO_BLINK = 0x%08x\n", config_data); + + /* + * At this moment, I am unsure if anything needs to happen with GPI_INV + */ + config_data = inl(nas_gpio_io_base + GPI_INV); + dev_dbg(dev, ": Data read from GPI_INV = 0x%08x\n", config_data); + + spin_unlock(&nasgpio_gpio_lock); + return 0; +} + +static void ich7_lpc_cleanup(struct device *dev) +{ + /* + * If we were given exclusive use of the GPIO + * I/O Address range, we must return it. + */ + if (gp_gpio_resource) { + dev_dbg(dev, ": Releasing GPIO I/O addresses\n"); + release_region(nas_gpio_io_base, ICH7_GPIO_SIZE); + gp_gpio_resource = NULL; + } +} + +/* + * The OS has determined that the LPC of the Intel ICH7 Southbridge is present + * so we can retrive the required operational information and prepare the GPIO. + */ +static struct pci_dev *nas_gpio_pci_dev; +static int __devinit ich7_lpc_probe(struct pci_dev *dev, + const struct pci_device_id *id) +{ + int status; + u32 gc = 0; + + status = pci_enable_device(dev); + if (status) { + dev_err(&dev->dev, "pci_enable_device failed\n"); + return -EIO; + } + + nas_gpio_pci_dev = dev; + status = pci_read_config_dword(dev, PMBASE, &g_pm_io_base); + if (status) + goto out; + g_pm_io_base &= 0x00000ff80; + + status = pci_read_config_dword(dev, GPIO_CTRL, &gc); + if (!(GPIO_EN & gc)) { + status = -EEXIST; + dev_info(&dev->dev, + "ERROR: The LPC GPIO Block has not been enabled.\n"); + goto out; + } + + status = pci_read_config_dword(dev, GPIO_BASE, &nas_gpio_io_base); + if (0 > status) { + dev_info(&dev->dev, "Unable to read GPIOBASE.\n"); + goto out; + } + dev_dbg(&dev->dev, ": GPIOBASE = 0x%08x\n", nas_gpio_io_base); + nas_gpio_io_base &= 0x00000ffc0; + + /* + * Insure that we have exclusive access to the GPIO I/O address range. + */ + gp_gpio_resource = request_region(nas_gpio_io_base, ICH7_GPIO_SIZE, + KBUILD_MODNAME); + if (NULL == gp_gpio_resource) { + dev_info(&dev->dev, + "ERROR Unable to register GPIO I/O addresses.\n"); + status = -1; + goto out; + } + + /* + * Initialize the GPIO for NAS/Home Server Use + */ + ich7_gpio_init(&dev->dev); + +out: + if (status) { + ich7_lpc_cleanup(&dev->dev); + pci_disable_device(dev); + } + return status; +} + +static void ich7_lpc_remove(struct pci_dev *dev) +{ + ich7_lpc_cleanup(&dev->dev); + pci_disable_device(dev); +} + +/* + * pci_driver structure passed to the PCI modules + */ +static struct pci_driver nas_gpio_pci_driver = { + .name = KBUILD_MODNAME, + .id_table = ich7_lpc_pci_id, + .probe = ich7_lpc_probe, + .remove = ich7_lpc_remove, +}; + +static struct led_classdev *get_classdev_for_led_nr(int nr) +{ + struct nasgpio_led *nas_led = &nasgpio_leds[nr]; + struct led_classdev *led = &nas_led->led_cdev; + return led; +} + + +static void set_power_light_amber_noblink(void) +{ + struct nasgpio_led *amber = get_led_named("power:amber:power"); + struct nasgpio_led *blue = get_led_named("power:blue:power"); + + if (!amber || !blue) + return; + /* + * LED_OFF implies disabling future blinking + */ + pr_debug("setting blue off and amber on\n"); + + nasgpio_led_set_brightness(&blue->led_cdev, LED_OFF); + nasgpio_led_set_brightness(&amber->led_cdev, LED_FULL); +} + +static ssize_t nas_led_blink_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct led_classdev *led = dev_get_drvdata(dev); + int blinking = 0; + if (nasgpio_led_get_attr(led, GPO_BLINK)) + blinking = 1; + return sprintf(buf, "%u\n", blinking); +} + +static ssize_t nas_led_blink_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t size) +{ + int ret; + struct led_classdev *led = dev_get_drvdata(dev); + unsigned long blink_state; + + ret = strict_strtoul(buf, 10, &blink_state); + if (ret) + return ret; + + nasgpio_led_set_attr(led, GPO_BLINK, blink_state); + + return size; +} + +static DEVICE_ATTR(blink, 0644, nas_led_blink_show, nas_led_blink_store); + +static int register_nasgpio_led(int led_nr) +{ + int ret; + struct nasgpio_led *nas_led = &nasgpio_leds[led_nr]; + struct led_classdev *led = get_classdev_for_led_nr(led_nr); + + led->name = nas_led->name; + led->brightness = LED_OFF; + if (nasgpio_led_get_attr(led, GP_LVL)) + led->brightness = LED_FULL; + led->brightness_set = nasgpio_led_set_brightness; + led->blink_set = nasgpio_led_set_blink; + ret = led_classdev_register(&nas_gpio_pci_dev->dev, led); + if (ret) + return ret; + ret = device_create_file(led->dev, &dev_attr_blink); + if (ret) + led_classdev_unregister(led); + return ret; +} + +static void unregister_nasgpio_led(int led_nr) +{ + struct led_classdev *led = get_classdev_for_led_nr(led_nr); + led_classdev_unregister(led); + device_remove_file(led->dev, &dev_attr_blink); +} +/* + * module load/initialization + */ +static int __init nas_gpio_init(void) +{ + int i; + int ret = 0; + int nr_devices = 0; + + nr_devices = dmi_check_system(nas_led_whitelist); + if (nodetect) { + pr_info("skipping hardware autodetection\n"); + pr_info("Please send 'dmidecode' output to dave@sr71.net\n"); + nr_devices++; + } + + if (nr_devices <= 0) { + pr_info("no LED devices found\n"); + return -ENODEV; + } + + pr_info("registering PCI driver\n"); + ret = pci_register_driver(&nas_gpio_pci_driver); + if (ret) + return ret; + for (i = 0; i < ARRAY_SIZE(nasgpio_leds); i++) { + ret = register_nasgpio_led(i); + if (ret) + goto out_err; + } + /* + * When the system powers on, the BIOS leaves the power + * light blue and blinking. This will turn it solid + * amber once the driver is loaded. + */ + set_power_light_amber_noblink(); + return 0; +out_err: + for (; i >= 0; i--) + unregister_nasgpio_led(i); + pci_unregister_driver(&nas_gpio_pci_driver); + return ret; +} + +/* + * module unload + */ +static void __exit nas_gpio_exit(void) +{ + int i; + pr_info("Unregistering driver\n"); + for (i = 0; i < ARRAY_SIZE(nasgpio_leds); i++) + unregister_nasgpio_led(i); + pci_unregister_driver(&nas_gpio_pci_driver); +} + +module_init(nas_gpio_init); +module_exit(nas_gpio_exit); diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 1a7a9fc50ea1..e3551d20464f 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -203,6 +203,7 @@ config CS5535_MFGPT config CS5535_MFGPT_DEFAULT_IRQ int + depends on CS5535_MFGPT default 7 help MFGPTs on the CS5535 require an interrupt. The selected IRQ diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c index cdb845b68ab5..06b64085a355 100644 --- a/drivers/mmc/core/sdio.c +++ b/drivers/mmc/core/sdio.c @@ -516,7 +516,8 @@ int mmc_attach_sdio(struct mmc_host *host, u32 ocr) * The number of functions on the card is encoded inside * the ocr. */ - card->sdio_funcs = funcs = (ocr & 0x70000000) >> 28; + funcs = (ocr & 0x70000000) >> 28; + card->sdio_funcs = 0; /* * If needed, disconnect card detection pull-up resistor. @@ -528,7 +529,7 @@ int mmc_attach_sdio(struct mmc_host *host, u32 ocr) /* * Initialize (but don't add) all present functions. */ - for (i = 0;i < funcs;i++) { + for (i = 0; i < funcs; i++, card->sdio_funcs++) { err = sdio_init_func(host->card, i + 1); if (err) goto remove; diff --git a/drivers/mmc/core/sdio_bus.c b/drivers/mmc/core/sdio_bus.c index d37464e296a5..9e060c87e64d 100644 --- a/drivers/mmc/core/sdio_bus.c +++ b/drivers/mmc/core/sdio_bus.c @@ -248,12 +248,15 @@ int sdio_add_func(struct sdio_func *func) /* * Unregister a SDIO function with the driver model, and * (eventually) free it. + * This function can be called through error paths where sdio_add_func() was + * never executed (because a failure occurred at an earlier point). */ void sdio_remove_func(struct sdio_func *func) { - if (sdio_func_present(func)) - device_del(&func->dev); + if (!sdio_func_present(func)) + return; + device_del(&func->dev); put_device(&func->dev); } diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index 9d405b181781..ce1d28884e29 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -44,6 +44,19 @@ config MMC_SDHCI_IO_ACCESSORS This is silent Kconfig symbol that is selected by the drivers that need to overwrite SDHCI IO memory accessors. +config MMC_SDHCI_BIG_ENDIAN_32BIT_BYTE_SWAPPER + bool + select MMC_SDHCI_IO_ACCESSORS + help + This option is selected by drivers running on big endian hosts + and performing I/O to a SDHCI controller through a bus that + implements a hardware byte swapper using a 32-bit datum. + This endian mapping mode is called "data invariance" and + has the effect of scrambling the addresses and formats of data + accessed in sizes other than the datum size. + + This is the case for the Freescale eSDHC and Nintendo Wii SDHCI. + config MMC_SDHCI_PCI tristate "SDHCI support on PCI bus" depends on MMC_SDHCI && PCI @@ -75,11 +88,29 @@ config MMC_RICOH_MMC config MMC_SDHCI_OF tristate "SDHCI support on OpenFirmware platforms" depends on MMC_SDHCI && PPC_OF - select MMC_SDHCI_IO_ACCESSORS help This selects the OF support for Secure Digital Host Controller - Interfaces. So far, only the Freescale eSDHC controller is known - to exist on OF platforms. + Interfaces. + + If unsure, say N. + +config MMC_SDHCI_OF_ESDHC + bool "SDHCI OF support for the Freescale eSDHC controller" + depends on MMC_SDHCI_OF + select MMC_SDHCI_BIG_ENDIAN_32BIT_BYTE_SWAPPER + help + This selects the Freescale eSDHC controller support. + + If unsure, say N. + +config MMC_SDHCI_OF_HLWD + bool "SDHCI OF support for the Nintendo Wii SDHCI controllers" + depends on MMC_SDHCI_OF + select MMC_SDHCI_BIG_ENDIAN_32BIT_BYTE_SWAPPER + help + This selects the Secure Digital Host Controller Interface (SDHCI) + found in the "Hollywood" chipset of the Nintendo Wii video game + console. If unsure, say N. diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile index ded4d8cdd9d7..3d253dd4240f 100644 --- a/drivers/mmc/host/Makefile +++ b/drivers/mmc/host/Makefile @@ -13,7 +13,6 @@ obj-$(CONFIG_MMC_MXC) += mxcmmc.o obj-$(CONFIG_MMC_SDHCI) += sdhci.o obj-$(CONFIG_MMC_SDHCI_PCI) += sdhci-pci.o obj-$(CONFIG_MMC_RICOH_MMC) += ricoh_mmc.o -obj-$(CONFIG_MMC_SDHCI_OF) += sdhci-of.o obj-$(CONFIG_MMC_SDHCI_PLTFM) += sdhci-pltfm.o obj-$(CONFIG_MMC_SDHCI_S3C) += sdhci-s3c.o obj-$(CONFIG_MMC_WBSD) += wbsd.o @@ -37,6 +36,11 @@ obj-$(CONFIG_MMC_CB710) += cb710-mmc.o obj-$(CONFIG_MMC_VIA_SDMMC) += via-sdmmc.o obj-$(CONFIG_SDH_BFIN) += bfin_sdh.o +obj-$(CONFIG_MMC_SDHCI_OF) += sdhci-of.o +sdhci-of-y := sdhci-of-core.o +sdhci-of-$(CONFIG_MMC_SDHCI_OF_ESDHC) += sdhci-of-esdhc.o +sdhci-of-$(CONFIG_MMC_SDHCI_OF_HLWD) += sdhci-of-hlwd.o + ifeq ($(CONFIG_CB710_DEBUG),y) CFLAGS-cb710-mmc += -DDEBUG endif diff --git a/drivers/mmc/host/sdhci-of.c b/drivers/mmc/host/sdhci-of-core.c index 01ab916c2802..55e33135edb4 100644 --- a/drivers/mmc/host/sdhci-of.c +++ b/drivers/mmc/host/sdhci-of-core.c @@ -22,62 +22,37 @@ #include <linux/of_platform.h> #include <linux/mmc/host.h> #include <asm/machdep.h> +#include "sdhci-of.h" #include "sdhci.h" -struct sdhci_of_data { - unsigned int quirks; - struct sdhci_ops ops; -}; - -struct sdhci_of_host { - unsigned int clock; - u16 xfer_mode_shadow; -}; +#ifdef CONFIG_MMC_SDHCI_BIG_ENDIAN_32BIT_BYTE_SWAPPER /* - * Ops and quirks for the Freescale eSDHC controller. + * These accessors are designed for big endian hosts doing I/O to + * little endian controllers incorporating a 32-bit hardware byte swapper. */ -#define ESDHC_DMA_SYSCTL 0x40c -#define ESDHC_DMA_SNOOP 0x00000040 - -#define ESDHC_SYSTEM_CONTROL 0x2c -#define ESDHC_CLOCK_MASK 0x0000fff0 -#define ESDHC_PREDIV_SHIFT 8 -#define ESDHC_DIVIDER_SHIFT 4 -#define ESDHC_CLOCK_PEREN 0x00000004 -#define ESDHC_CLOCK_HCKEN 0x00000002 -#define ESDHC_CLOCK_IPGEN 0x00000001 - -#define ESDHC_HOST_CONTROL_RES 0x05 - -static u32 esdhc_readl(struct sdhci_host *host, int reg) +u32 sdhci_be32bs_readl(struct sdhci_host *host, int reg) { return in_be32(host->ioaddr + reg); } -static u16 esdhc_readw(struct sdhci_host *host, int reg) +u16 sdhci_be32bs_readw(struct sdhci_host *host, int reg) { - u16 ret; - - if (unlikely(reg == SDHCI_HOST_VERSION)) - ret = in_be16(host->ioaddr + reg); - else - ret = in_be16(host->ioaddr + (reg ^ 0x2)); - return ret; + return in_be16(host->ioaddr + (reg ^ 0x2)); } -static u8 esdhc_readb(struct sdhci_host *host, int reg) +u8 sdhci_be32bs_readb(struct sdhci_host *host, int reg) { return in_8(host->ioaddr + (reg ^ 0x3)); } -static void esdhc_writel(struct sdhci_host *host, u32 val, int reg) +void sdhci_be32bs_writel(struct sdhci_host *host, u32 val, int reg) { out_be32(host->ioaddr + reg, val); } -static void esdhc_writew(struct sdhci_host *host, u16 val, int reg) +void sdhci_be32bs_writew(struct sdhci_host *host, u16 val, int reg) { struct sdhci_of_host *of_host = sdhci_priv(host); int base = reg & ~0x3; @@ -92,106 +67,21 @@ static void esdhc_writew(struct sdhci_host *host, u16 val, int reg) of_host->xfer_mode_shadow = val; return; case SDHCI_COMMAND: - esdhc_writel(host, val << 16 | of_host->xfer_mode_shadow, - SDHCI_TRANSFER_MODE); + sdhci_be32bs_writel(host, val << 16 | of_host->xfer_mode_shadow, + SDHCI_TRANSFER_MODE); return; - case SDHCI_BLOCK_SIZE: - /* - * Two last DMA bits are reserved, and first one is used for - * non-standard blksz of 4096 bytes that we don't support - * yet. So clear the DMA boundary bits. - */ - val &= ~SDHCI_MAKE_BLKSZ(0x7, 0); - /* fall through */ } clrsetbits_be32(host->ioaddr + base, 0xffff << shift, val << shift); } -static void esdhc_writeb(struct sdhci_host *host, u8 val, int reg) +void sdhci_be32bs_writeb(struct sdhci_host *host, u8 val, int reg) { int base = reg & ~0x3; int shift = (reg & 0x3) * 8; - /* Prevent SDHCI core from writing reserved bits (e.g. HISPD). */ - if (reg == SDHCI_HOST_CONTROL) - val &= ~ESDHC_HOST_CONTROL_RES; - clrsetbits_be32(host->ioaddr + base , 0xff << shift, val << shift); } - -static void esdhc_set_clock(struct sdhci_host *host, unsigned int clock) -{ - int pre_div = 2; - int div = 1; - - clrbits32(host->ioaddr + ESDHC_SYSTEM_CONTROL, ESDHC_CLOCK_IPGEN | - ESDHC_CLOCK_HCKEN | ESDHC_CLOCK_PEREN | ESDHC_CLOCK_MASK); - - if (clock == 0) - goto out; - - while (host->max_clk / pre_div / 16 > clock && pre_div < 256) - pre_div *= 2; - - while (host->max_clk / pre_div / div > clock && div < 16) - div++; - - dev_dbg(mmc_dev(host->mmc), "desired SD clock: %d, actual: %d\n", - clock, host->max_clk / pre_div / div); - - pre_div >>= 1; - div--; - - setbits32(host->ioaddr + ESDHC_SYSTEM_CONTROL, ESDHC_CLOCK_IPGEN | - ESDHC_CLOCK_HCKEN | ESDHC_CLOCK_PEREN | - div << ESDHC_DIVIDER_SHIFT | pre_div << ESDHC_PREDIV_SHIFT); - mdelay(100); -out: - host->clock = clock; -} - -static int esdhc_enable_dma(struct sdhci_host *host) -{ - setbits32(host->ioaddr + ESDHC_DMA_SYSCTL, ESDHC_DMA_SNOOP); - return 0; -} - -static unsigned int esdhc_get_max_clock(struct sdhci_host *host) -{ - struct sdhci_of_host *of_host = sdhci_priv(host); - - return of_host->clock; -} - -static unsigned int esdhc_get_min_clock(struct sdhci_host *host) -{ - struct sdhci_of_host *of_host = sdhci_priv(host); - - return of_host->clock / 256 / 16; -} - -static struct sdhci_of_data sdhci_esdhc = { - .quirks = SDHCI_QUIRK_FORCE_BLK_SZ_2048 | - SDHCI_QUIRK_BROKEN_CARD_DETECTION | - SDHCI_QUIRK_NO_BUSY_IRQ | - SDHCI_QUIRK_NONSTANDARD_CLOCK | - SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK | - SDHCI_QUIRK_PIO_NEEDS_DELAY | - SDHCI_QUIRK_RESTORE_IRQS_AFTER_RESET | - SDHCI_QUIRK_NO_CARD_NO_RESET, - .ops = { - .readl = esdhc_readl, - .readw = esdhc_readw, - .readb = esdhc_readb, - .writel = esdhc_writel, - .writew = esdhc_writew, - .writeb = esdhc_writeb, - .set_clock = esdhc_set_clock, - .enable_dma = esdhc_enable_dma, - .get_max_clock = esdhc_get_max_clock, - .get_min_clock = esdhc_get_min_clock, - }, -}; +#endif /* CONFIG_MMC_SDHCI_BIG_ENDIAN_32BIT_BYTE_SWAPPER */ #ifdef CONFIG_PM @@ -301,9 +191,14 @@ static int __devexit sdhci_of_remove(struct of_device *ofdev) } static const struct of_device_id sdhci_of_match[] = { +#ifdef CONFIG_MMC_SDHCI_OF_ESDHC { .compatible = "fsl,mpc8379-esdhc", .data = &sdhci_esdhc, }, { .compatible = "fsl,mpc8536-esdhc", .data = &sdhci_esdhc, }, { .compatible = "fsl,esdhc", .data = &sdhci_esdhc, }, +#endif +#ifdef CONFIG_MMC_SDHCI_OF_HLWD + { .compatible = "nintendo,hollywood-sdhci", .data = &sdhci_hlwd, }, +#endif { .compatible = "generic-sdhci", }, {}, }; diff --git a/drivers/mmc/host/sdhci-of-esdhc.c b/drivers/mmc/host/sdhci-of-esdhc.c new file mode 100644 index 000000000000..d5b11a17e648 --- /dev/null +++ b/drivers/mmc/host/sdhci-of-esdhc.c @@ -0,0 +1,143 @@ +/* + * Freescale eSDHC controller driver. + * + * Copyright (c) 2007 Freescale Semiconductor, Inc. + * Copyright (c) 2009 MontaVista Software, Inc. + * + * Authors: Xiaobo Xie <X.Xie@freescale.com> + * Anton Vorontsov <avorontsov@ru.mvista.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or (at + * your option) any later version. + */ + +#include <linux/io.h> +#include <linux/delay.h> +#include <linux/mmc/host.h> +#include "sdhci-of.h" +#include "sdhci.h" + +/* + * Ops and quirks for the Freescale eSDHC controller. + */ + +#define ESDHC_DMA_SYSCTL 0x40c +#define ESDHC_DMA_SNOOP 0x00000040 + +#define ESDHC_SYSTEM_CONTROL 0x2c +#define ESDHC_CLOCK_MASK 0x0000fff0 +#define ESDHC_PREDIV_SHIFT 8 +#define ESDHC_DIVIDER_SHIFT 4 +#define ESDHC_CLOCK_PEREN 0x00000004 +#define ESDHC_CLOCK_HCKEN 0x00000002 +#define ESDHC_CLOCK_IPGEN 0x00000001 + +#define ESDHC_HOST_CONTROL_RES 0x05 + +static u16 esdhc_readw(struct sdhci_host *host, int reg) +{ + u16 ret; + + if (unlikely(reg == SDHCI_HOST_VERSION)) + ret = in_be16(host->ioaddr + reg); + else + ret = sdhci_be32bs_readw(host, reg); + return ret; +} + +static void esdhc_writew(struct sdhci_host *host, u16 val, int reg) +{ + if (reg == SDHCI_BLOCK_SIZE) { + /* + * Two last DMA bits are reserved, and first one is used for + * non-standard blksz of 4096 bytes that we don't support + * yet. So clear the DMA boundary bits. + */ + val &= ~SDHCI_MAKE_BLKSZ(0x7, 0); + } + sdhci_be32bs_writew(host, val, reg); +} + +static void esdhc_writeb(struct sdhci_host *host, u8 val, int reg) +{ + /* Prevent SDHCI core from writing reserved bits (e.g. HISPD). */ + if (reg == SDHCI_HOST_CONTROL) + val &= ~ESDHC_HOST_CONTROL_RES; + sdhci_be32bs_writeb(host, val, reg); +} + +static void esdhc_set_clock(struct sdhci_host *host, unsigned int clock) +{ + int pre_div = 2; + int div = 1; + + clrbits32(host->ioaddr + ESDHC_SYSTEM_CONTROL, ESDHC_CLOCK_IPGEN | + ESDHC_CLOCK_HCKEN | ESDHC_CLOCK_PEREN | ESDHC_CLOCK_MASK); + + if (clock == 0) + goto out; + + while (host->max_clk / pre_div / 16 > clock && pre_div < 256) + pre_div *= 2; + + while (host->max_clk / pre_div / div > clock && div < 16) + div++; + + dev_dbg(mmc_dev(host->mmc), "desired SD clock: %d, actual: %d\n", + clock, host->max_clk / pre_div / div); + + pre_div >>= 1; + div--; + + setbits32(host->ioaddr + ESDHC_SYSTEM_CONTROL, ESDHC_CLOCK_IPGEN | + ESDHC_CLOCK_HCKEN | ESDHC_CLOCK_PEREN | + div << ESDHC_DIVIDER_SHIFT | pre_div << ESDHC_PREDIV_SHIFT); + mdelay(100); +out: + host->clock = clock; +} + +static int esdhc_enable_dma(struct sdhci_host *host) +{ + setbits32(host->ioaddr + ESDHC_DMA_SYSCTL, ESDHC_DMA_SNOOP); + return 0; +} + +static unsigned int esdhc_get_max_clock(struct sdhci_host *host) +{ + struct sdhci_of_host *of_host = sdhci_priv(host); + + return of_host->clock; +} + +static unsigned int esdhc_get_min_clock(struct sdhci_host *host) +{ + struct sdhci_of_host *of_host = sdhci_priv(host); + + return of_host->clock / 256 / 16; +} + +struct sdhci_of_data sdhci_esdhc = { + .quirks = SDHCI_QUIRK_FORCE_BLK_SZ_2048 | + SDHCI_QUIRK_BROKEN_CARD_DETECTION | + SDHCI_QUIRK_NO_BUSY_IRQ | + SDHCI_QUIRK_NONSTANDARD_CLOCK | + SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK | + SDHCI_QUIRK_PIO_NEEDS_DELAY | + SDHCI_QUIRK_RESTORE_IRQS_AFTER_RESET | + SDHCI_QUIRK_NO_CARD_NO_RESET, + .ops = { + .readl = sdhci_be32bs_readl, + .readw = esdhc_readw, + .readb = sdhci_be32bs_readb, + .writel = sdhci_be32bs_writel, + .writew = esdhc_writew, + .writeb = esdhc_writeb, + .set_clock = esdhc_set_clock, + .enable_dma = esdhc_enable_dma, + .get_max_clock = esdhc_get_max_clock, + .get_min_clock = esdhc_get_min_clock, + }, +}; diff --git a/drivers/mmc/host/sdhci-of-hlwd.c b/drivers/mmc/host/sdhci-of-hlwd.c new file mode 100644 index 000000000000..35117f3ed757 --- /dev/null +++ b/drivers/mmc/host/sdhci-of-hlwd.c @@ -0,0 +1,65 @@ +/* + * drivers/mmc/host/sdhci-of-hlwd.c + * + * Nintendo Wii Secure Digital Host Controller Interface. + * Copyright (C) 2009 The GameCube Linux Team + * Copyright (C) 2009 Albert Herranz + * + * Based on sdhci-of-esdhc.c + * + * Copyright (c) 2007 Freescale Semiconductor, Inc. + * Copyright (c) 2009 MontaVista Software, Inc. + * + * Authors: Xiaobo Xie <X.Xie@freescale.com> + * Anton Vorontsov <avorontsov@ru.mvista.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or (at + * your option) any later version. + */ + +#include <linux/delay.h> +#include <linux/mmc/host.h> +#include "sdhci-of.h" +#include "sdhci.h" + +/* + * Ops and quirks for the Nintendo Wii SDHCI controllers. + */ + +/* + * We need a small delay after each write, or things go horribly wrong. + */ +#define SDHCI_HLWD_WRITE_DELAY 5 /* usecs */ + +static void sdhci_hlwd_writel(struct sdhci_host *host, u32 val, int reg) +{ + sdhci_be32bs_writel(host, val, reg); + udelay(SDHCI_HLWD_WRITE_DELAY); +} + +static void sdhci_hlwd_writew(struct sdhci_host *host, u16 val, int reg) +{ + sdhci_be32bs_writew(host, val, reg); + udelay(SDHCI_HLWD_WRITE_DELAY); +} + +static void sdhci_hlwd_writeb(struct sdhci_host *host, u8 val, int reg) +{ + sdhci_be32bs_writeb(host, val, reg); + udelay(SDHCI_HLWD_WRITE_DELAY); +} + +struct sdhci_of_data sdhci_hlwd = { + .quirks = SDHCI_QUIRK_32BIT_DMA_ADDR | + SDHCI_QUIRK_32BIT_DMA_SIZE, + .ops = { + .readl = sdhci_be32bs_readl, + .readw = sdhci_be32bs_readw, + .readb = sdhci_be32bs_readb, + .writel = sdhci_hlwd_writel, + .writew = sdhci_hlwd_writew, + .writeb = sdhci_hlwd_writeb, + }, +}; diff --git a/drivers/mmc/host/sdhci-of.h b/drivers/mmc/host/sdhci-of.h new file mode 100644 index 000000000000..ad09ad9915d8 --- /dev/null +++ b/drivers/mmc/host/sdhci-of.h @@ -0,0 +1,42 @@ +/* + * OpenFirmware bindings for Secure Digital Host Controller Interface. + * + * Copyright (c) 2007 Freescale Semiconductor, Inc. + * Copyright (c) 2009 MontaVista Software, Inc. + * + * Authors: Xiaobo Xie <X.Xie@freescale.com> + * Anton Vorontsov <avorontsov@ru.mvista.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or (at + * your option) any later version. + */ + +#ifndef __SDHCI_OF_H +#define __SDHCI_OF_H + +#include <linux/types.h> +#include "sdhci.h" + +struct sdhci_of_data { + unsigned int quirks; + struct sdhci_ops ops; +}; + +struct sdhci_of_host { + unsigned int clock; + u16 xfer_mode_shadow; +}; + +extern u32 sdhci_be32bs_readl(struct sdhci_host *host, int reg); +extern u16 sdhci_be32bs_readw(struct sdhci_host *host, int reg); +extern u8 sdhci_be32bs_readb(struct sdhci_host *host, int reg); +extern void sdhci_be32bs_writel(struct sdhci_host *host, u32 val, int reg); +extern void sdhci_be32bs_writew(struct sdhci_host *host, u16 val, int reg); +extern void sdhci_be32bs_writeb(struct sdhci_host *host, u8 val, int reg); + +extern struct sdhci_of_data sdhci_esdhc; +extern struct sdhci_of_data sdhci_hlwd; + +#endif /* __SDHCI_OF_H */ diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h index ce5f1d73dc04..842f46f94284 100644 --- a/drivers/mmc/host/sdhci.h +++ b/drivers/mmc/host/sdhci.h @@ -8,6 +8,8 @@ * the Free Software Foundation; either version 2 of the License, or (at * your option) any later version. */ +#ifndef __SDHCI_H +#define __SDHCI_H #include <linux/scatterlist.h> #include <linux/compiler.h> @@ -408,3 +410,5 @@ extern void sdhci_remove_host(struct sdhci_host *host, int dead); extern int sdhci_suspend_host(struct sdhci_host *host, pm_message_t state); extern int sdhci_resume_host(struct sdhci_host *host); #endif + +#endif /* __SDHCI_H */ diff --git a/drivers/mtd/maps/pxa2xx-flash.c b/drivers/mtd/maps/pxa2xx-flash.c index 74fa075c838a..b13f6417b5b2 100644 --- a/drivers/mtd/maps/pxa2xx-flash.c +++ b/drivers/mtd/maps/pxa2xx-flash.c @@ -20,14 +20,23 @@ #include <asm/io.h> #include <mach/hardware.h> -#include <asm/cacheflush.h> #include <asm/mach/flash.h> +#define CACHELINESIZE 32 + static void pxa2xx_map_inval_cache(struct map_info *map, unsigned long from, ssize_t len) { - flush_ioremap_region(map->phys, map->cached, from, len); + unsigned long start = (unsigned long)map->cached + from; + unsigned long end = start + len; + + start &= ~(CACHELINESIZE - 1); + while (start < end) { + /* invalidate D cache line */ + asm volatile ("mcr p15, 0, %0, c7, c6, 1" : : "r" (start)); + start += CACHELINESIZE; + } } struct pxa2xx_flash_info { diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h index 675b7df632fc..27ca859e7453 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.h +++ b/drivers/net/wireless/iwlwifi/iwl-core.h @@ -63,7 +63,7 @@ #ifndef __iwl_core_h__ #define __iwl_core_h__ -#include <linux/utsrelease.h> +#include <generated/utsrelease.h> /************************ * forward declarations * diff --git a/drivers/pcmcia/pxa2xx_base.c b/drivers/pcmcia/pxa2xx_base.c index 3aabf1e37988..76e640bccde8 100644 --- a/drivers/pcmcia/pxa2xx_base.c +++ b/drivers/pcmcia/pxa2xx_base.c @@ -291,7 +291,7 @@ static int pxa2xx_drv_pcmcia_probe(struct platform_device *dev) skt->nr = ops->first + i; skt->ops = ops; skt->socket.owner = ops->owner; - skt->socket.dev.parent = dev; + skt->socket.dev.parent = &dev->dev; skt->socket.pci_irq = NO_IRQ; ret = pxa2xx_drv_pcmcia_add_one(skt); @@ -304,8 +304,8 @@ static int pxa2xx_drv_pcmcia_probe(struct platform_device *dev) soc_pcmcia_remove_one(&sinfo->skt[i]); kfree(sinfo); } else { - pxa2xx_configure_sockets(dev); - dev_set_drvdata(dev, sinfo); + pxa2xx_configure_sockets(&dev->dev); + dev_set_drvdata(&dev->dev, sinfo); } return ret; diff --git a/drivers/platform/x86/compal-laptop.c b/drivers/platform/x86/compal-laptop.c index 11003bba10d3..1a387e79f719 100644 --- a/drivers/platform/x86/compal-laptop.c +++ b/drivers/platform/x86/compal-laptop.c @@ -51,7 +51,6 @@ #include <linux/dmi.h> #include <linux/backlight.h> #include <linux/platform_device.h> -#include <linux/autoconf.h> #define COMPAL_DRIVER_VERSION "0.2.6" diff --git a/drivers/regulator/88pm8607.c b/drivers/regulator/88pm8607.c new file mode 100644 index 000000000000..04719551381b --- /dev/null +++ b/drivers/regulator/88pm8607.c @@ -0,0 +1,685 @@ +/* + * Regulators driver for Marvell 88PM8607 + * + * Copyright (C) 2009 Marvell International Ltd. + * Haojian Zhuang <haojian.zhuang@marvell.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/err.h> +#include <linux/platform_device.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/machine.h> +#include <linux/mfd/88pm8607.h> + +struct pm8607_regulator_info { + struct regulator_desc desc; + struct pm8607_chip *chip; + struct regulator_dev *regulator; + + int min_uV; + int max_uV; + int step_uV; + int vol_reg; + int vol_shift; + int vol_nbits; + int update_reg; + int update_bit; + int enable_reg; + int enable_bit; + int slope_double; +}; + +static inline int check_range(struct pm8607_regulator_info *info, + int min_uV, int max_uV) +{ + if (max_uV < info->min_uV || min_uV > info->max_uV || min_uV > max_uV) + return -EINVAL; + + return 0; +} + +static int pm8607_list_voltage(struct regulator_dev *rdev, unsigned index) +{ + struct pm8607_regulator_info *info = rdev_get_drvdata(rdev); + uint8_t chip_id = info->chip->chip_id; + int ret = -EINVAL; + + switch (info->desc.id) { + case PM8607_ID_BUCK1: + ret = (index < 0x1d) ? (index * 25000 + 800000) : + ((index < 0x20) ? 1500000 : + ((index < 0x40) ? ((index - 0x20) * 25000) : + -EINVAL)); + break; + case PM8607_ID_BUCK3: + ret = (index < 0x3d) ? (index * 25000) : + ((index < 0x40) ? 1500000 : -EINVAL); + if (ret < 0) + break; + if (info->slope_double) + ret <<= 1; + break; + case PM8607_ID_LDO1: + ret = (index == 0) ? 1800000 : + ((index == 1) ? 1200000 : + ((index == 2) ? 2800000 : -EINVAL)); + break; + case PM8607_ID_LDO5: + ret = (index == 0) ? 2900000 : + ((index == 1) ? 3000000 : + ((index == 2) ? 3100000 : 3300000)); + break; + case PM8607_ID_LDO7: + case PM8607_ID_LDO8: + ret = (index < 3) ? (index * 50000 + 1800000) : + ((index < 8) ? (index * 50000 + 2550000) : + -EINVAL); + break; + case PM8607_ID_LDO12: + ret = (index < 2) ? (index * 100000 + 1800000) : + ((index < 7) ? (index * 100000 + 2500000) : + ((index == 7) ? 3300000 : 1200000)); + break; + case PM8607_ID_LDO2: + case PM8607_ID_LDO3: + case PM8607_ID_LDO9: + switch (chip_id) { + case PM8607_CHIP_A0: + case PM8607_CHIP_A1: + ret = (index < 3) ? (index * 50000 + 1800000) : + ((index < 8) ? (index * 50000 + 2550000) : + -EINVAL); + break; + case PM8607_CHIP_B0: + ret = (index < 3) ? (index * 50000 + 1800000) : + ((index < 7) ? (index * 50000 + 2550000) : + 3300000); + break; + } + break; + case PM8607_ID_LDO4: + switch (chip_id) { + case PM8607_CHIP_A0: + case PM8607_CHIP_A1: + ret = (index < 3) ? (index * 50000 + 1800000) : + ((index < 8) ? (index * 50000 + 2550000) : + -EINVAL); + break; + case PM8607_CHIP_B0: + ret = (index < 3) ? (index * 50000 + 1800000) : + ((index < 6) ? (index * 50000 + 2550000) : + ((index == 6) ? 2900000 : 3300000)); + break; + } + break; + case PM8607_ID_LDO6: + switch (chip_id) { + case PM8607_CHIP_A0: + case PM8607_CHIP_A1: + ret = (index < 3) ? (index * 50000 + 1800000) : + ((index < 8) ? (index * 50000 + 2450000) : + -EINVAL); + break; + case PM8607_CHIP_B0: + ret = (index < 2) ? (index * 50000 + 1800000) : + ((index < 7) ? (index * 50000 + 2500000) : + 3300000); + break; + } + break; + case PM8607_ID_LDO10: + switch (chip_id) { + case PM8607_CHIP_A0: + case PM8607_CHIP_A1: + ret = (index < 3) ? (index * 50000 + 1800000) : + ((index < 8) ? (index * 50000 + 2550000) : + 1200000); + break; + case PM8607_CHIP_B0: + ret = (index < 3) ? (index * 50000 + 1800000) : + ((index < 7) ? (index * 50000 + 2550000) : + ((index == 7) ? 3300000 : 1200000)); + break; + } + break; + case PM8607_ID_LDO14: + switch (chip_id) { + case PM8607_CHIP_A0: + case PM8607_CHIP_A1: + ret = (index < 3) ? (index * 50000 + 1800000) : + ((index < 8) ? (index * 50000 + 2550000) : + -EINVAL); + break; + case PM8607_CHIP_B0: + ret = (index < 2) ? (index * 50000 + 1800000) : + ((index < 7) ? (index * 50000 + 2600000) : + 3300000); + break; + } + break; + } + return ret; +} + +static int choose_voltage(struct regulator_dev *rdev, int min_uV, int max_uV) +{ + struct pm8607_regulator_info *info = rdev_get_drvdata(rdev); + uint8_t chip_id = info->chip->chip_id; + int val = -ENOENT; + int ret; + + switch (info->desc.id) { + case PM8607_ID_BUCK1: + if (min_uV >= 800000) /* 800mV ~ 1500mV / 25mV */ + val = (min_uV - 775001) / 25000; + else { /* 25mV ~ 775mV / 25mV */ + val = (min_uV + 249999) / 25000; + val += 32; + } + break; + case PM8607_ID_BUCK3: + if (info->slope_double) + min_uV = min_uV >> 1; + val = (min_uV + 249999) / 25000; /* 0mV ~ 1500mV / 25mV */ + + break; + case PM8607_ID_LDO1: + if (min_uV > 1800000) + val = 2; + else if (min_uV > 1200000) + val = 0; + else + val = 1; + break; + case PM8607_ID_LDO5: + if (min_uV > 3100000) + val = 3; + else /* 2900mV ~ 3100mV / 100mV */ + val = (min_uV - 2800001) / 100000; + break; + case PM8607_ID_LDO7: + case PM8607_ID_LDO8: + if (min_uV < 2700000) { /* 1800mV ~ 1900mV / 50mV */ + if (min_uV <= 1800000) + val = 0; /* 1800mv */ + else if (min_uV <= 1900000) + val = (min_uV - 1750001) / 50000; + else + val = 3; /* 2700mV */ + } else { /* 2700mV ~ 2900mV / 50mV */ + if (min_uV <= 2900000) { + val = (min_uV - 2650001) / 50000; + val += 3; + } else + val = -EINVAL; + } + break; + case PM8607_ID_LDO10: + if (min_uV > 2850000) + val = 7; + else if (min_uV <= 1200000) + val = 8; + else if (min_uV < 2700000) /* 1800mV ~ 1900mV / 50mV */ + val = (min_uV - 1750001) / 50000; + else { /* 2700mV ~ 2850mV / 50mV */ + val = (min_uV - 2650001) / 50000; + val += 3; + } + break; + case PM8607_ID_LDO12: + if (min_uV < 2700000) { /* 1800mV ~ 1900mV / 100mV */ + if (min_uV <= 1200000) + val = 8; /* 1200mV */ + else if (min_uV <= 1800000) + val = 0; /* 1800mV */ + else if (min_uV <= 1900000) + val = (min_uV - 1700001) / 100000; + else + val = 2; /* 2700mV */ + } else { /* 2700mV ~ 3100mV / 100mV */ + if (min_uV <= 3100000) { + val = (min_uV - 2600001) / 100000; + val += 2; + } else if (min_uV <= 3300000) + val = 7; + else + val = -EINVAL; + } + break; + case PM8607_ID_LDO2: + case PM8607_ID_LDO3: + case PM8607_ID_LDO9: + switch (chip_id) { + case PM8607_CHIP_A0: + case PM8607_CHIP_A1: + if (min_uV < 2700000) /* 1800mV ~ 1900mV / 50mV */ + if (min_uV <= 1800000) + val = 0; + else if (min_uV <= 1900000) + val = (min_uV - 1750001) / 50000; + else + val = 3; /* 2700mV */ + else { /* 2700mV ~ 2900mV / 50mV */ + if (min_uV <= 2900000) { + val = (min_uV - 2650001) / 50000; + val += 3; + } else + val = -EINVAL; + } + break; + case PM8607_CHIP_B0: + if (min_uV < 2700000) { /* 1800mV ~ 1900mV / 50mV */ + if (min_uV <= 1800000) + val = 0; + else if (min_uV <= 1900000) + val = (min_uV - 1750001) / 50000; + else + val = 3; /* 2700mV */ + } else { /* 2700mV ~ 2850mV / 50mV */ + if (min_uV <= 2850000) { + val = (min_uV - 2650001) / 50000; + val += 3; + } else if (min_uV <= 3300000) + val = 7; + else + val = -EINVAL; + } + break; + } + break; + case PM8607_ID_LDO4: + switch (chip_id) { + case PM8607_CHIP_A0: + case PM8607_CHIP_A1: + if (min_uV < 2700000) /* 1800mV ~ 1900mV / 50mV */ + if (min_uV <= 1800000) + val = 0; + else if (min_uV <= 1900000) + val = (min_uV - 1750001) / 50000; + else + val = 3; /* 2700mV */ + else { /* 2700mV ~ 2900mV / 50mV */ + if (min_uV <= 2900000) { + val = (min_uV - 2650001) / 50000; + val += 3; + } else + val = -EINVAL; + } + break; + case PM8607_CHIP_B0: + if (min_uV < 2700000) { /* 1800mV ~ 1900mV / 50mV */ + if (min_uV <= 1800000) + val = 0; + else if (min_uV <= 1900000) + val = (min_uV - 1750001) / 50000; + else + val = 3; /* 2700mV */ + } else { /* 2700mV ~ 2800mV / 50mV */ + if (min_uV <= 2850000) { + val = (min_uV - 2650001) / 50000; + val += 3; + } else if (min_uV <= 2900000) + val = 6; + else if (min_uV <= 3300000) + val = 7; + else + val = -EINVAL; + } + break; + } + break; + case PM8607_ID_LDO6: + switch (chip_id) { + case PM8607_CHIP_A0: + case PM8607_CHIP_A1: + if (min_uV < 2600000) { /* 1800mV ~ 1900mV / 50mV */ + if (min_uV <= 1800000) + val = 0; + else if (min_uV <= 1900000) + val = (min_uV - 1750001) / 50000; + else + val = 3; /* 2600mV */ + } else { /* 2600mV ~ 2800mV / 50mV */ + if (min_uV <= 2800000) { + val = (min_uV - 2550001) / 50000; + val += 3; + } else + val = -EINVAL; + } + break; + case PM8607_CHIP_B0: + if (min_uV < 2600000) { /* 1800mV ~ 1850mV / 50mV */ + if (min_uV <= 1800000) + val = 0; + else if (min_uV <= 1850000) + val = (min_uV - 1750001) / 50000; + else + val = 2; /* 2600mV */ + } else { /* 2600mV ~ 2800mV / 50mV */ + if (min_uV <= 2800000) { + val = (min_uV - 2550001) / 50000; + val += 2; + } else if (min_uV <= 3300000) + val = 7; + else + val = -EINVAL; + } + break; + } + break; + case PM8607_ID_LDO14: + switch (chip_id) { + case PM8607_CHIP_A0: + case PM8607_CHIP_A1: + if (min_uV < 2700000) { /* 1800mV ~ 1900mV / 50mV */ + if (min_uV <= 1800000) + val = 0; + else if (min_uV <= 1900000) + val = (min_uV - 1750001) / 50000; + else + val = 3; /* 2700mV */ + } else { /* 2700mV ~ 2900mV / 50mV */ + if (min_uV <= 2900000) { + val = (min_uV - 2650001) / 50000; + val += 3; + } else + val = -EINVAL; + } + break; + case PM8607_CHIP_B0: + if (min_uV < 2700000) { /* 1800mV ~ 1850mV / 50mV */ + if (min_uV <= 1800000) + val = 0; + else if (min_uV <= 1850000) + val = (min_uV - 1750001) / 50000; + else + val = 2; /* 2700mV */ + } else { /* 2700mV ~ 2900mV / 50mV */ + if (min_uV <= 2900000) { + val = (min_uV - 2650001) / 50000; + val += 2; + } else if (min_uV <= 3300000) + val = 7; + else + val = -EINVAL; + } + break; + } + break; + } + if (val >= 0) { + ret = pm8607_list_voltage(rdev, val); + if (ret > max_uV) { + pr_err("exceed voltage range (%d %d) uV", + min_uV, max_uV); + return -EINVAL; + } + } else + pr_err("invalid voltage range (%d %d) uV", min_uV, max_uV); + return val; +} + +static int pm8607_set_voltage(struct regulator_dev *rdev, + int min_uV, int max_uV) +{ + struct pm8607_regulator_info *info = rdev_get_drvdata(rdev); + struct pm8607_chip *chip = info->chip; + uint8_t val, mask; + int ret; + + if (check_range(info, min_uV, max_uV)) { + pr_err("invalid voltage range (%d, %d) uV\n", min_uV, max_uV); + return -EINVAL; + } + + ret = choose_voltage(rdev, min_uV, max_uV); + if (ret < 0) + return -EINVAL; + val = (uint8_t)(ret << info->vol_shift); + mask = ((1 << info->vol_nbits) - 1) << info->vol_shift; + + ret = pm8607_set_bits(chip, info->vol_reg, mask, val); + if (ret) + return ret; + switch (info->desc.id) { + case PM8607_ID_BUCK1: + case PM8607_ID_BUCK3: + ret = pm8607_set_bits(chip, info->update_reg, + 1 << info->update_bit, + 1 << info->update_bit); + break; + } + return ret; +} + +static int pm8607_get_voltage(struct regulator_dev *rdev) +{ + struct pm8607_regulator_info *info = rdev_get_drvdata(rdev); + struct pm8607_chip *chip = info->chip; + uint8_t val, mask; + int ret; + + ret = pm8607_reg_read(chip, info->vol_reg); + if (ret < 0) + return ret; + + mask = ((1 << info->vol_nbits) - 1) << info->vol_shift; + val = ((unsigned char)ret & mask) >> info->vol_shift; + + return pm8607_list_voltage(rdev, val); +} + +static int pm8607_enable(struct regulator_dev *rdev) +{ + struct pm8607_regulator_info *info = rdev_get_drvdata(rdev); + struct pm8607_chip *chip = info->chip; + + return pm8607_set_bits(chip, info->enable_reg, + 1 << info->enable_bit, + 1 << info->enable_bit); +} + +static int pm8607_disable(struct regulator_dev *rdev) +{ + struct pm8607_regulator_info *info = rdev_get_drvdata(rdev); + struct pm8607_chip *chip = info->chip; + + return pm8607_set_bits(chip, info->enable_reg, + 1 << info->enable_bit, 0); +} + +static int pm8607_is_enabled(struct regulator_dev *rdev) +{ + struct pm8607_regulator_info *info = rdev_get_drvdata(rdev); + struct pm8607_chip *chip = info->chip; + int ret; + + ret = pm8607_reg_read(chip, info->enable_reg); + if (ret < 0) + return ret; + + return !!((unsigned char)ret & (1 << info->enable_bit)); +} + +static struct regulator_ops pm8607_regulator_ops = { + .set_voltage = pm8607_set_voltage, + .get_voltage = pm8607_get_voltage, + .enable = pm8607_enable, + .disable = pm8607_disable, + .is_enabled = pm8607_is_enabled, +}; + +#define PM8607_DVC(_id, min, max, step, vreg, nbits, ureg, ubit, ereg, ebit) \ +{ \ + .desc = { \ + .name = "BUCK" #_id, \ + .ops = &pm8607_regulator_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = PM8607_ID_BUCK##_id, \ + .owner = THIS_MODULE, \ + }, \ + .min_uV = (min) * 1000, \ + .max_uV = (max) * 1000, \ + .step_uV = (step) * 1000, \ + .vol_reg = PM8607_##vreg, \ + .vol_shift = (0), \ + .vol_nbits = (nbits), \ + .update_reg = PM8607_##ureg, \ + .update_bit = (ubit), \ + .enable_reg = PM8607_##ereg, \ + .enable_bit = (ebit), \ + .slope_double = (0), \ +} + +#define PM8607_LDO(_id, min, max, step, vreg, shift, nbits, ereg, ebit) \ +{ \ + .desc = { \ + .name = "LDO" #_id, \ + .ops = &pm8607_regulator_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = PM8607_ID_LDO##_id, \ + .owner = THIS_MODULE, \ + }, \ + .min_uV = (min) * 1000, \ + .max_uV = (max) * 1000, \ + .step_uV = (step) * 1000, \ + .vol_reg = PM8607_##vreg, \ + .vol_shift = (shift), \ + .vol_nbits = (nbits), \ + .enable_reg = PM8607_##ereg, \ + .enable_bit = (ebit), \ + .slope_double = (0), \ +} + +static struct pm8607_regulator_info pm8607_regulator_info[] = { + PM8607_DVC(1, 0, 1500, 25, BUCK1, 6, GO, 0, SUPPLIES_EN11, 0), + PM8607_DVC(3, 0, 1500, 25, BUCK3, 6, GO, 2, SUPPLIES_EN11, 2), + + PM8607_LDO(1 , 1200, 2800, 0, LDO1 , 0, 2, SUPPLIES_EN11, 3), + PM8607_LDO(2 , 1800, 3300, 0, LDO2 , 0, 3, SUPPLIES_EN11, 4), + PM8607_LDO(3 , 1800, 3300, 0, LDO3 , 0, 3, SUPPLIES_EN11, 5), + PM8607_LDO(4 , 1800, 3300, 0, LDO4 , 0, 3, SUPPLIES_EN11, 6), + PM8607_LDO(5 , 2900, 3300, 0, LDO5 , 0, 2, SUPPLIES_EN11, 7), + PM8607_LDO(6 , 1800, 3300, 0, LDO6 , 0, 3, SUPPLIES_EN12, 0), + PM8607_LDO(7 , 1800, 2900, 0, LDO7 , 0, 3, SUPPLIES_EN12, 1), + PM8607_LDO(8 , 1800, 2900, 0, LDO8 , 0, 3, SUPPLIES_EN12, 2), + PM8607_LDO(9 , 1800, 3300, 0, LDO9 , 0, 3, SUPPLIES_EN12, 3), + PM8607_LDO(10, 1200, 3300, 0, LDO10, 0, 4, SUPPLIES_EN11, 4), + PM8607_LDO(12, 1200, 3300, 0, LDO12, 0, 4, SUPPLIES_EN11, 5), + PM8607_LDO(14, 1800, 3300, 0, LDO14, 0, 3, SUPPLIES_EN11, 6), +}; + +static inline struct pm8607_regulator_info *find_regulator_info(int id) +{ + struct pm8607_regulator_info *info; + int i; + + for (i = 0; i < ARRAY_SIZE(pm8607_regulator_info); i++) { + info = &pm8607_regulator_info[i]; + if (info->desc.id == id) + return info; + } + return NULL; +} + +static int __devinit pm8607_regulator_probe(struct platform_device *pdev) +{ + struct pm8607_chip *chip = dev_get_drvdata(pdev->dev.parent); + struct pm8607_platform_data *pdata = chip->dev->platform_data; + struct pm8607_regulator_info *info = NULL; + + info = find_regulator_info(pdev->id); + if (info == NULL) { + dev_err(&pdev->dev, "invalid regulator ID specified\n"); + return -EINVAL; + } + + info->chip = chip; + + info->regulator = regulator_register(&info->desc, &pdev->dev, + pdata->regulator[pdev->id], info); + if (IS_ERR(info->regulator)) { + dev_err(&pdev->dev, "failed to register regulator %s\n", + info->desc.name); + return PTR_ERR(info->regulator); + } + + /* check DVC ramp slope double */ + if (info->desc.id == PM8607_ID_BUCK3) + if (info->chip->buck3_double) + info->slope_double = 1; + + platform_set_drvdata(pdev, info); + return 0; +} + +static int __devexit pm8607_regulator_remove(struct platform_device *pdev) +{ + struct pm8607_regulator_info *info = platform_get_drvdata(pdev); + + regulator_unregister(info->regulator); + return 0; +} + +#define PM8607_REGULATOR_DRIVER(_name) \ +{ \ + .driver = { \ + .name = "88pm8607-" #_name, \ + .owner = THIS_MODULE, \ + }, \ + .probe = pm8607_regulator_probe, \ + .remove = __devexit_p(pm8607_regulator_remove), \ +} + +static struct platform_driver pm8607_regulator_driver[] = { + PM8607_REGULATOR_DRIVER(buck1), + PM8607_REGULATOR_DRIVER(buck2), + PM8607_REGULATOR_DRIVER(buck3), + PM8607_REGULATOR_DRIVER(ldo1), + PM8607_REGULATOR_DRIVER(ldo2), + PM8607_REGULATOR_DRIVER(ldo3), + PM8607_REGULATOR_DRIVER(ldo4), + PM8607_REGULATOR_DRIVER(ldo5), + PM8607_REGULATOR_DRIVER(ldo6), + PM8607_REGULATOR_DRIVER(ldo7), + PM8607_REGULATOR_DRIVER(ldo8), + PM8607_REGULATOR_DRIVER(ldo9), + PM8607_REGULATOR_DRIVER(ldo10), + PM8607_REGULATOR_DRIVER(ldo12), + PM8607_REGULATOR_DRIVER(ldo14), +}; + +static int __init pm8607_regulator_init(void) +{ + int i, count, ret; + + count = ARRAY_SIZE(pm8607_regulator_driver); + for (i = 0; i < count; i++) { + ret = platform_driver_register(&pm8607_regulator_driver[i]); + if (ret != 0) + pr_err("Failed to register regulator driver: %d\n", + ret); + } + return 0; +} +subsys_initcall(pm8607_regulator_init); + +static void __exit pm8607_regulator_exit(void) +{ + int i, count; + + count = ARRAY_SIZE(pm8607_regulator_driver); + for (i = 0; i < count; i++) + platform_driver_unregister(&pm8607_regulator_driver[i]); +} +module_exit(pm8607_regulator_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Haojian Zhuang <haojian.zhuang@marvell.com>"); +MODULE_DESCRIPTION("Regulator Driver for Marvell 88PM8607 PMIC"); +MODULE_ALIAS("platform:88pm8607-regulator"); diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 7cfdd65bebb4..262f62eec837 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -69,6 +69,13 @@ config REGULATOR_MAX1586 regulator via I2C bus. The provided regulator is suitable for PXA27x chips to control VCC_CORE and VCC_USIM voltages. +config REGULATOR_MAX8660 + tristate "Maxim 8660/8661 voltage regulator" + depends on I2C + help + This driver controls a Maxim 8660/8661 voltage output + regulator via I2C bus. + config REGULATOR_TWL4030 bool "TI TWL4030/TWL5030/TWL6030/TPS695x0 PMIC" depends on TWL4030_CORE @@ -157,5 +164,11 @@ config REGULATOR_TPS6507X three step-down converters and two general-purpose LDO voltage regulators. It supports TI's software based Class-2 SmartReflex implementation. +config REGULATOR_88PM8607 + bool "Marvell 88PM8607 Power regulators" + depends on MFD_88PM8607=y + help + This driver supports 88PM8607 voltage regulator chips. + endif diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 9ae3cc44e668..b3c806c79415 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -12,6 +12,7 @@ obj-$(CONFIG_REGULATOR_BQ24022) += bq24022.o obj-$(CONFIG_REGULATOR_LP3971) += lp3971.o obj-$(CONFIG_REGULATOR_MAX1586) += max1586.o obj-$(CONFIG_REGULATOR_TWL4030) += twl-regulator.o +obj-$(CONFIG_REGULATOR_MAX8660) += max8660.o obj-$(CONFIG_REGULATOR_WM831X) += wm831x-dcdc.o obj-$(CONFIG_REGULATOR_WM831X) += wm831x-isink.o obj-$(CONFIG_REGULATOR_WM831X) += wm831x-ldo.o @@ -20,10 +21,11 @@ obj-$(CONFIG_REGULATOR_WM8400) += wm8400-regulator.o obj-$(CONFIG_REGULATOR_DA903X) += da903x.o obj-$(CONFIG_REGULATOR_PCF50633) += pcf50633-regulator.o obj-$(CONFIG_REGULATOR_PCAP) += pcap-regulator.o -obj-$(CONFIG_REGULATOR_MC13783) += mc13783.o +obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o obj-$(CONFIG_REGULATOR_AB3100) += ab3100.o obj-$(CONFIG_REGULATOR_TPS65023) += tps65023-regulator.o obj-$(CONFIG_REGULATOR_TPS6507X) += tps6507x-regulator.o +obj-$(CONFIG_REGULATOR_88PM8607) += 88pm8607.o ccflags-$(CONFIG_REGULATOR_DEBUG) += -DDEBUG diff --git a/drivers/regulator/ab3100.c b/drivers/regulator/ab3100.c index 49aeee823a25..b349db4504b7 100644 --- a/drivers/regulator/ab3100.c +++ b/drivers/regulator/ab3100.c @@ -81,7 +81,7 @@ static const u8 ab3100_reg_init_order[AB3100_NUM_REGULATORS+2] = { #define LDO_C_VOLTAGE 2650000 #define LDO_D_VOLTAGE 2650000 -static const int const ldo_e_buck_typ_voltages[] = { +static const int ldo_e_buck_typ_voltages[] = { 1800000, 1400000, 1300000, @@ -91,7 +91,7 @@ static const int const ldo_e_buck_typ_voltages[] = { 900000, }; -static const int const ldo_f_typ_voltages[] = { +static const int ldo_f_typ_voltages[] = { 1800000, 1400000, 1300000, @@ -102,21 +102,21 @@ static const int const ldo_f_typ_voltages[] = { 2650000, }; -static const int const ldo_g_typ_voltages[] = { +static const int ldo_g_typ_voltages[] = { 2850000, 2750000, 1800000, 1500000, }; -static const int const ldo_h_typ_voltages[] = { +static const int ldo_h_typ_voltages[] = { 2750000, 1800000, 1500000, 1200000, }; -static const int const ldo_k_typ_voltages[] = { +static const int ldo_k_typ_voltages[] = { 2750000, 1800000, }; @@ -241,24 +241,12 @@ static int ab3100_disable_regulator(struct regulator_dev *reg) * LDO D is a special regulator. When it is disabled, the entire * system is shut down. So this is handled specially. */ + pr_info("Called ab3100_disable_regulator\n"); if (abreg->regreg == AB3100_LDO_D) { - int i; - dev_info(®->dev, "disabling LDO D - shut down system\n"); - /* - * Set regulators to default values, ignore any errors, - * we're going DOWN - */ - for (i = 0; i < ARRAY_SIZE(ab3100_reg_init_order); i++) { - (void) ab3100_set_register_interruptible(abreg->ab3100, - ab3100_reg_init_order[i], - abreg->plfdata->reg_initvals[i]); - } - /* Setting LDO D to 0x00 cuts the power to the SoC */ return ab3100_set_register_interruptible(abreg->ab3100, AB3100_LDO_D, 0x00U); - } /* @@ -607,13 +595,6 @@ static int __init ab3100_regulators_probe(struct platform_device *pdev) } } - if (err) { - dev_err(&pdev->dev, - "LDO D regulator initialization failed with error %d\n", - err); - return err; - } - /* Register the regulators */ for (i = 0; i < AB3100_NUM_REGULATORS; i++) { struct ab3100_regulator *reg = &ab3100_regulators[i]; @@ -688,7 +669,7 @@ static __init int ab3100_regulators_init(void) static __exit void ab3100_regulators_exit(void) { - platform_driver_register(&ab3100_regulators_driver); + platform_driver_unregister(&ab3100_regulators_driver); } subsys_initcall(ab3100_regulators_init); diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index efe568deda12..686ef270ecf7 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -66,6 +66,16 @@ static unsigned int _regulator_get_mode(struct regulator_dev *rdev); static void _notifier_call_chain(struct regulator_dev *rdev, unsigned long event, void *data); +static const char *rdev_get_name(struct regulator_dev *rdev) +{ + if (rdev->constraints && rdev->constraints->name) + return rdev->constraints->name; + else if (rdev->desc->name) + return rdev->desc->name; + else + return ""; +} + /* gets the regulator for a given consumer device */ static struct regulator *get_device_regulator(struct device *dev) { @@ -96,12 +106,12 @@ static int regulator_check_voltage(struct regulator_dev *rdev, if (!rdev->constraints) { printk(KERN_ERR "%s: no constraints for %s\n", __func__, - rdev->desc->name); + rdev_get_name(rdev)); return -ENODEV; } if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_VOLTAGE)) { printk(KERN_ERR "%s: operation not allowed for %s\n", - __func__, rdev->desc->name); + __func__, rdev_get_name(rdev)); return -EPERM; } @@ -124,12 +134,12 @@ static int regulator_check_current_limit(struct regulator_dev *rdev, if (!rdev->constraints) { printk(KERN_ERR "%s: no constraints for %s\n", __func__, - rdev->desc->name); + rdev_get_name(rdev)); return -ENODEV; } if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_CURRENT)) { printk(KERN_ERR "%s: operation not allowed for %s\n", - __func__, rdev->desc->name); + __func__, rdev_get_name(rdev)); return -EPERM; } @@ -159,17 +169,17 @@ static int regulator_check_mode(struct regulator_dev *rdev, int mode) if (!rdev->constraints) { printk(KERN_ERR "%s: no constraints for %s\n", __func__, - rdev->desc->name); + rdev_get_name(rdev)); return -ENODEV; } if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_MODE)) { printk(KERN_ERR "%s: operation not allowed for %s\n", - __func__, rdev->desc->name); + __func__, rdev_get_name(rdev)); return -EPERM; } if (!(rdev->constraints->valid_modes_mask & mode)) { printk(KERN_ERR "%s: invalid mode %x for %s\n", - __func__, mode, rdev->desc->name); + __func__, mode, rdev_get_name(rdev)); return -EINVAL; } return 0; @@ -180,12 +190,12 @@ static int regulator_check_drms(struct regulator_dev *rdev) { if (!rdev->constraints) { printk(KERN_ERR "%s: no constraints for %s\n", __func__, - rdev->desc->name); + rdev_get_name(rdev)); return -ENODEV; } if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_DRMS)) { printk(KERN_ERR "%s: operation not allowed for %s\n", - __func__, rdev->desc->name); + __func__, rdev_get_name(rdev)); return -EPERM; } return 0; @@ -230,16 +240,8 @@ static ssize_t regulator_name_show(struct device *dev, struct device_attribute *attr, char *buf) { struct regulator_dev *rdev = dev_get_drvdata(dev); - const char *name; - if (rdev->constraints && rdev->constraints->name) - name = rdev->constraints->name; - else if (rdev->desc->name) - name = rdev->desc->name; - else - name = ""; - - return sprintf(buf, "%s\n", name); + return sprintf(buf, "%s\n", rdev_get_name(rdev)); } static ssize_t regulator_print_opmode(char *buf, int mode) @@ -388,7 +390,7 @@ static ssize_t regulator_total_uA_show(struct device *dev, mutex_lock(&rdev->mutex); list_for_each_entry(regulator, &rdev->consumer_list, list) - uA += regulator->uA_load; + uA += regulator->uA_load; mutex_unlock(&rdev->mutex); return sprintf(buf, "%d\n", uA); } @@ -563,7 +565,7 @@ static void drms_uA_update(struct regulator_dev *rdev) /* calc total requested load */ list_for_each_entry(sibling, &rdev->consumer_list, list) - current_uA += sibling->uA_load; + current_uA += sibling->uA_load; /* now get the optimum mode for our new total regulator load */ mode = rdev->desc->ops->get_optimum_mode(rdev, input_uV, @@ -579,10 +581,29 @@ static int suspend_set_state(struct regulator_dev *rdev, struct regulator_state *rstate) { int ret = 0; + bool can_set_state; - /* enable & disable are mandatory for suspend control */ - if (!rdev->desc->ops->set_suspend_enable || - !rdev->desc->ops->set_suspend_disable) { + can_set_state = rdev->desc->ops->set_suspend_enable && + rdev->desc->ops->set_suspend_disable; + + /* If we have no suspend mode configration don't set anything; + * only warn if the driver actually makes the suspend mode + * configurable. + */ + if (!rstate->enabled && !rstate->disabled) { + if (can_set_state) + printk(KERN_WARNING "%s: No configuration for %s\n", + __func__, rdev_get_name(rdev)); + return 0; + } + + if (rstate->enabled && rstate->disabled) { + printk(KERN_ERR "%s: invalid configuration for %s\n", + __func__, rdev_get_name(rdev)); + return -EINVAL; + } + + if (!can_set_state) { printk(KERN_ERR "%s: no way to set suspend state\n", __func__); return -EINVAL; @@ -641,25 +662,43 @@ static void print_constraints(struct regulator_dev *rdev) { struct regulation_constraints *constraints = rdev->constraints; char buf[80]; - int count; + int count = 0; + int ret; - if (rdev->desc->type == REGULATOR_VOLTAGE) { + if (constraints->min_uV && constraints->max_uV) { if (constraints->min_uV == constraints->max_uV) - count = sprintf(buf, "%d mV ", - constraints->min_uV / 1000); + count += sprintf(buf + count, "%d mV ", + constraints->min_uV / 1000); else - count = sprintf(buf, "%d <--> %d mV ", - constraints->min_uV / 1000, - constraints->max_uV / 1000); - } else { + count += sprintf(buf + count, "%d <--> %d mV ", + constraints->min_uV / 1000, + constraints->max_uV / 1000); + } + + if (!constraints->min_uV || + constraints->min_uV != constraints->max_uV) { + ret = _regulator_get_voltage(rdev); + if (ret > 0) + count += sprintf(buf + count, "at %d mV ", ret / 1000); + } + + if (constraints->min_uA && constraints->max_uA) { if (constraints->min_uA == constraints->max_uA) - count = sprintf(buf, "%d mA ", - constraints->min_uA / 1000); + count += sprintf(buf + count, "%d mA ", + constraints->min_uA / 1000); else - count = sprintf(buf, "%d <--> %d mA ", - constraints->min_uA / 1000, - constraints->max_uA / 1000); + count += sprintf(buf + count, "%d <--> %d mA ", + constraints->min_uA / 1000, + constraints->max_uA / 1000); } + + if (!constraints->min_uA || + constraints->min_uA != constraints->max_uA) { + ret = _regulator_get_current_limit(rdev); + if (ret > 0) + count += sprintf(buf + count, "at %d uA ", ret / 1000); + } + if (constraints->valid_modes_mask & REGULATOR_MODE_FAST) count += sprintf(buf + count, "fast "); if (constraints->valid_modes_mask & REGULATOR_MODE_NORMAL) @@ -669,33 +708,30 @@ static void print_constraints(struct regulator_dev *rdev) if (constraints->valid_modes_mask & REGULATOR_MODE_STANDBY) count += sprintf(buf + count, "standby"); - printk(KERN_INFO "regulator: %s: %s\n", rdev->desc->name, buf); + printk(KERN_INFO "regulator: %s: %s\n", rdev_get_name(rdev), buf); } -/** - * set_machine_constraints - sets regulator constraints - * @rdev: regulator source - * @constraints: constraints to apply - * - * Allows platform initialisation code to define and constrain - * regulator circuits e.g. valid voltage/current ranges, etc. NOTE: - * Constraints *must* be set by platform code in order for some - * regulator operations to proceed i.e. set_voltage, set_current_limit, - * set_mode. - */ -static int set_machine_constraints(struct regulator_dev *rdev, +static int machine_constraints_voltage(struct regulator_dev *rdev, struct regulation_constraints *constraints) { - int ret = 0; - const char *name; struct regulator_ops *ops = rdev->desc->ops; + const char *name = rdev_get_name(rdev); + int ret; - if (constraints->name) - name = constraints->name; - else if (rdev->desc->name) - name = rdev->desc->name; - else - name = "regulator"; + /* do we need to apply the constraint voltage */ + if (rdev->constraints->apply_uV && + rdev->constraints->min_uV == rdev->constraints->max_uV && + ops->set_voltage) { + ret = ops->set_voltage(rdev, + rdev->constraints->min_uV, rdev->constraints->max_uV); + if (ret < 0) { + printk(KERN_ERR "%s: failed to apply %duV constraint to %s\n", + __func__, + rdev->constraints->min_uV, name); + rdev->constraints = NULL; + return ret; + } + } /* constrain machine-level voltage specs to fit * the actual range supported by this regulator. @@ -719,14 +755,13 @@ static int set_machine_constraints(struct regulator_dev *rdev, /* voltage constraints are optional */ if ((cmin == 0) && (cmax == 0)) - goto out; + return 0; /* else require explicit machine-level constraints */ if (cmin <= 0 || cmax <= 0 || cmax < cmin) { pr_err("%s: %s '%s' voltage constraints\n", __func__, "invalid", name); - ret = -EINVAL; - goto out; + return -EINVAL; } /* initial: [cmin..cmax] valid, [min_uV..max_uV] not */ @@ -748,8 +783,7 @@ static int set_machine_constraints(struct regulator_dev *rdev, if (max_uV < min_uV) { pr_err("%s: %s '%s' voltage constraints\n", __func__, "unsupportable", name); - ret = -EINVAL; - goto out; + return -EINVAL; } /* use regulator's subset of machine constraints */ @@ -767,22 +801,34 @@ static int set_machine_constraints(struct regulator_dev *rdev, } } + return 0; +} + +/** + * set_machine_constraints - sets regulator constraints + * @rdev: regulator source + * @constraints: constraints to apply + * + * Allows platform initialisation code to define and constrain + * regulator circuits e.g. valid voltage/current ranges, etc. NOTE: + * Constraints *must* be set by platform code in order for some + * regulator operations to proceed i.e. set_voltage, set_current_limit, + * set_mode. + */ +static int set_machine_constraints(struct regulator_dev *rdev, + struct regulation_constraints *constraints) +{ + int ret = 0; + const char *name; + struct regulator_ops *ops = rdev->desc->ops; + rdev->constraints = constraints; - /* do we need to apply the constraint voltage */ - if (rdev->constraints->apply_uV && - rdev->constraints->min_uV == rdev->constraints->max_uV && - ops->set_voltage) { - ret = ops->set_voltage(rdev, - rdev->constraints->min_uV, rdev->constraints->max_uV); - if (ret < 0) { - printk(KERN_ERR "%s: failed to apply %duV constraint to %s\n", - __func__, - rdev->constraints->min_uV, name); - rdev->constraints = NULL; - goto out; - } - } + name = rdev_get_name(rdev); + + ret = machine_constraints_voltage(rdev, constraints); + if (ret != 0) + goto out; /* do we need to setup our suspend state */ if (constraints->initial_state) { @@ -903,7 +949,7 @@ static int set_consumer_device_supply(struct regulator_dev *rdev, dev_name(&node->regulator->dev), node->regulator->desc->name, supply, - dev_name(&rdev->dev), rdev->desc->name); + dev_name(&rdev->dev), rdev_get_name(rdev)); return -EBUSY; } @@ -1212,7 +1258,7 @@ static int _regulator_enable(struct regulator_dev *rdev) ret = _regulator_enable(rdev->supply); if (ret < 0) { printk(KERN_ERR "%s: failed to enable %s: %d\n", - __func__, rdev->desc->name, ret); + __func__, rdev_get_name(rdev), ret); return ret; } } @@ -1238,7 +1284,7 @@ static int _regulator_enable(struct regulator_dev *rdev) } } else if (ret < 0) { printk(KERN_ERR "%s: is_enabled() failed for %s: %d\n", - __func__, rdev->desc->name, ret); + __func__, rdev_get_name(rdev), ret); return ret; } /* Fallthrough on positive return values - already enabled */ @@ -1279,7 +1325,7 @@ static int _regulator_disable(struct regulator_dev *rdev) if (WARN(rdev->use_count <= 0, "unbalanced disables for %s\n", - rdev->desc->name)) + rdev_get_name(rdev))) return -EIO; /* are we the last user and permitted to disable ? */ @@ -1292,7 +1338,7 @@ static int _regulator_disable(struct regulator_dev *rdev) ret = rdev->desc->ops->disable(rdev); if (ret < 0) { printk(KERN_ERR "%s: failed to disable %s\n", - __func__, rdev->desc->name); + __func__, rdev_get_name(rdev)); return ret; } } @@ -1349,7 +1395,7 @@ static int _regulator_force_disable(struct regulator_dev *rdev) ret = rdev->desc->ops->disable(rdev); if (ret < 0) { printk(KERN_ERR "%s: failed to force disable %s\n", - __func__, rdev->desc->name); + __func__, rdev_get_name(rdev)); return ret; } /* notify other consumers that power has been forced off */ @@ -1766,7 +1812,7 @@ int regulator_set_optimum_mode(struct regulator *regulator, int uA_load) output_uV = rdev->desc->ops->get_voltage(rdev); if (output_uV <= 0) { printk(KERN_ERR "%s: invalid output voltage found for %s\n", - __func__, rdev->desc->name); + __func__, rdev_get_name(rdev)); goto out; } @@ -1777,13 +1823,13 @@ int regulator_set_optimum_mode(struct regulator *regulator, int uA_load) input_uV = rdev->constraints->input_uV; if (input_uV <= 0) { printk(KERN_ERR "%s: invalid input voltage found for %s\n", - __func__, rdev->desc->name); + __func__, rdev_get_name(rdev)); goto out; } /* calc total requested load for this regulator */ list_for_each_entry(consumer, &rdev->consumer_list, list) - total_uA_load += consumer->uA_load; + total_uA_load += consumer->uA_load; mode = rdev->desc->ops->get_optimum_mode(rdev, input_uV, output_uV, @@ -1791,7 +1837,7 @@ int regulator_set_optimum_mode(struct regulator *regulator, int uA_load) ret = regulator_check_mode(rdev, mode); if (ret < 0) { printk(KERN_ERR "%s: failed to get optimum mode for %s @" - " %d uA %d -> %d uV\n", __func__, rdev->desc->name, + " %d uA %d -> %d uV\n", __func__, rdev_get_name(rdev), total_uA_load, input_uV, output_uV); goto out; } @@ -1799,7 +1845,7 @@ int regulator_set_optimum_mode(struct regulator *regulator, int uA_load) ret = rdev->desc->ops->set_mode(rdev, mode); if (ret < 0) { printk(KERN_ERR "%s: failed to set optimum mode %x for %s\n", - __func__, mode, rdev->desc->name); + __func__, mode, rdev_get_name(rdev)); goto out; } ret = mode; @@ -1852,9 +1898,9 @@ static void _notifier_call_chain(struct regulator_dev *rdev, /* now notify regulator we supply */ list_for_each_entry(_rdev, &rdev->supply_list, slist) { - mutex_lock(&_rdev->mutex); - _notifier_call_chain(_rdev, event, data); - mutex_unlock(&_rdev->mutex); + mutex_lock(&_rdev->mutex); + _notifier_call_chain(_rdev, event, data); + mutex_unlock(&_rdev->mutex); } } @@ -1885,9 +1931,9 @@ int regulator_bulk_get(struct device *dev, int num_consumers, consumers[i].consumer = regulator_get(dev, consumers[i].supply); if (IS_ERR(consumers[i].consumer)) { - dev_err(dev, "Failed to get supply '%s'\n", - consumers[i].supply); ret = PTR_ERR(consumers[i].consumer); + dev_err(dev, "Failed to get supply '%s': %d\n", + consumers[i].supply, ret); consumers[i].consumer = NULL; goto err; } @@ -1930,8 +1976,8 @@ int regulator_bulk_enable(int num_consumers, return 0; err: - printk(KERN_ERR "Failed to enable %s\n", consumers[i].supply); - for (i = 0; i < num_consumers; i++) + printk(KERN_ERR "Failed to enable %s: %d\n", consumers[i].supply, ret); + for (--i; i >= 0; --i) regulator_disable(consumers[i].consumer); return ret; @@ -1965,8 +2011,9 @@ int regulator_bulk_disable(int num_consumers, return 0; err: - printk(KERN_ERR "Failed to disable %s\n", consumers[i].supply); - for (i = 0; i < num_consumers; i++) + printk(KERN_ERR "Failed to disable %s: %d\n", consumers[i].supply, + ret); + for (--i; i >= 0; --i) regulator_enable(consumers[i].consumer); return ret; @@ -2316,7 +2363,7 @@ int regulator_suspend_prepare(suspend_state_t state) if (ret < 0) { printk(KERN_ERR "%s: failed to prepare %s\n", - __func__, rdev->desc->name); + __func__, rdev_get_name(rdev)); goto out; } } @@ -2429,12 +2476,7 @@ static int __init regulator_init_complete(void) ops = rdev->desc->ops; c = rdev->constraints; - if (c && c->name) - name = c->name; - else if (rdev->desc->name) - name = rdev->desc->name; - else - name = "regulator"; + name = rdev_get_name(rdev); if (!ops->disable || (c && c->always_on)) continue; diff --git a/drivers/regulator/da903x.c b/drivers/regulator/da903x.c index aa224d936e0d..f8c4661a7a81 100644 --- a/drivers/regulator/da903x.c +++ b/drivers/regulator/da903x.c @@ -331,7 +331,7 @@ static int da9034_get_ldo12_voltage(struct regulator_dev *rdev) static int da9034_list_ldo12_voltage(struct regulator_dev *rdev, unsigned selector) { - if (selector > ARRAY_SIZE(da9034_ldo12_data)) + if (selector >= ARRAY_SIZE(da9034_ldo12_data)) return -EINVAL; return da9034_ldo12_data[selector] * 1000; } diff --git a/drivers/regulator/lp3971.c b/drivers/regulator/lp3971.c index 7803a320543b..76d08c282f9c 100644 --- a/drivers/regulator/lp3971.c +++ b/drivers/regulator/lp3971.c @@ -446,8 +446,8 @@ static int setup_regulators(struct lp3971 *lp3971, lp3971->rdev[i] = regulator_register(®ulators[id], lp3971->dev, pdata->regulators[i].initdata, lp3971); - err = IS_ERR(lp3971->rdev[i]); - if (err) { + if (IS_ERR(lp3971->rdev[i])) { + err = PTR_ERR(lp3971->rdev[i]); dev_err(lp3971->dev, "regulator init failed: %d\n", err); goto error; diff --git a/drivers/regulator/max8660.c b/drivers/regulator/max8660.c new file mode 100644 index 000000000000..acc2fb7b6087 --- /dev/null +++ b/drivers/regulator/max8660.c @@ -0,0 +1,510 @@ +/* + * max8660.c -- Voltage regulation for the Maxim 8660/8661 + * + * based on max1586.c and wm8400-regulator.c + * + * Copyright (C) 2009 Wolfram Sang, Pengutronix e.K. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 59 Temple + * Place, Suite 330, Boston, MA 02111-1307 USA + * + * Some info: + * + * Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX8660-MAX8661.pdf + * + * This chip is a bit nasty because it is a write-only device. Thus, the driver + * uses shadow registers to keep track of its values. The main problem appears + * to be the initialization: When Linux boots up, we cannot know if the chip is + * in the default state or not, so we would have to pass such information in + * platform_data. As this adds a bit of complexity to the driver, this is left + * out for now until it is really needed. + * + * [A|S|M]DTV1 registers are currently not used, but [A|S|M]DTV2. + * + * If the driver is feature complete, it might be worth to check if one set of + * functions for V3-V7 is sufficient. For maximum flexibility during + * development, they are separated for now. + * + */ + +#include <linux/module.h> +#include <linux/err.h> +#include <linux/i2c.h> +#include <linux/platform_device.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/max8660.h> + +#define MAX8660_DCDC_MIN_UV 725000 +#define MAX8660_DCDC_MAX_UV 1800000 +#define MAX8660_DCDC_STEP 25000 +#define MAX8660_DCDC_MAX_SEL 0x2b + +#define MAX8660_LDO5_MIN_UV 1700000 +#define MAX8660_LDO5_MAX_UV 2000000 +#define MAX8660_LDO5_STEP 25000 +#define MAX8660_LDO5_MAX_SEL 0x0c + +#define MAX8660_LDO67_MIN_UV 1800000 +#define MAX8660_LDO67_MAX_UV 3300000 +#define MAX8660_LDO67_STEP 100000 +#define MAX8660_LDO67_MAX_SEL 0x0f + +enum { + MAX8660_OVER1, + MAX8660_OVER2, + MAX8660_VCC1, + MAX8660_ADTV1, + MAX8660_ADTV2, + MAX8660_SDTV1, + MAX8660_SDTV2, + MAX8660_MDTV1, + MAX8660_MDTV2, + MAX8660_L12VCR, + MAX8660_FPWM, + MAX8660_N_REGS, /* not a real register */ +}; + +struct max8660 { + struct i2c_client *client; + u8 shadow_regs[MAX8660_N_REGS]; /* as chip is write only */ + struct regulator_dev *rdev[]; +}; + +static int max8660_write(struct max8660 *max8660, u8 reg, u8 mask, u8 val) +{ + static const u8 max8660_addresses[MAX8660_N_REGS] = + { 0x10, 0x12, 0x20, 0x23, 0x24, 0x29, 0x2a, 0x32, 0x33, 0x39, 0x80 }; + + int ret; + u8 reg_val = (max8660->shadow_regs[reg] & mask) | val; + dev_vdbg(&max8660->client->dev, "Writing reg %02x with %02x\n", + max8660_addresses[reg], reg_val); + + ret = i2c_smbus_write_byte_data(max8660->client, + max8660_addresses[reg], reg_val); + if (ret == 0) + max8660->shadow_regs[reg] = reg_val; + + return ret; +} + + +/* + * DCDC functions + */ + +static int max8660_dcdc_is_enabled(struct regulator_dev *rdev) +{ + struct max8660 *max8660 = rdev_get_drvdata(rdev); + u8 val = max8660->shadow_regs[MAX8660_OVER1]; + u8 mask = (rdev_get_id(rdev) == MAX8660_V3) ? 1 : 4; + return !!(val & mask); +} + +static int max8660_dcdc_enable(struct regulator_dev *rdev) +{ + struct max8660 *max8660 = rdev_get_drvdata(rdev); + u8 bit = (rdev_get_id(rdev) == MAX8660_V3) ? 1 : 4; + return max8660_write(max8660, MAX8660_OVER1, 0xff, bit); +} + +static int max8660_dcdc_disable(struct regulator_dev *rdev) +{ + struct max8660 *max8660 = rdev_get_drvdata(rdev); + u8 mask = (rdev_get_id(rdev) == MAX8660_V3) ? ~1 : ~4; + return max8660_write(max8660, MAX8660_OVER1, mask, 0); +} + +static int max8660_dcdc_list(struct regulator_dev *rdev, unsigned selector) +{ + if (selector > MAX8660_DCDC_MAX_SEL) + return -EINVAL; + return MAX8660_DCDC_MIN_UV + selector * MAX8660_DCDC_STEP; +} + +static int max8660_dcdc_get(struct regulator_dev *rdev) +{ + struct max8660 *max8660 = rdev_get_drvdata(rdev); + u8 reg = (rdev_get_id(rdev) == MAX8660_V3) ? MAX8660_ADTV2 : MAX8660_SDTV2; + u8 selector = max8660->shadow_regs[reg]; + return MAX8660_DCDC_MIN_UV + selector * MAX8660_DCDC_STEP; +} + +static int max8660_dcdc_set(struct regulator_dev *rdev, int min_uV, int max_uV) +{ + struct max8660 *max8660 = rdev_get_drvdata(rdev); + u8 reg, selector, bits; + int ret; + + if (min_uV < MAX8660_DCDC_MIN_UV || min_uV > MAX8660_DCDC_MAX_UV) + return -EINVAL; + if (max_uV < MAX8660_DCDC_MIN_UV || max_uV > MAX8660_DCDC_MAX_UV) + return -EINVAL; + + selector = (min_uV - (MAX8660_DCDC_MIN_UV - MAX8660_DCDC_STEP + 1)) + / MAX8660_DCDC_STEP; + + ret = max8660_dcdc_list(rdev, selector); + if (ret < 0 || ret > max_uV) + return -EINVAL; + + reg = (rdev_get_id(rdev) == MAX8660_V3) ? MAX8660_ADTV2 : MAX8660_SDTV2; + ret = max8660_write(max8660, reg, 0, selector); + if (ret) + return ret; + + /* Select target voltage register and activate regulation */ + bits = (rdev_get_id(rdev) == MAX8660_V3) ? 0x03 : 0x30; + return max8660_write(max8660, MAX8660_VCC1, 0xff, bits); +} + +static struct regulator_ops max8660_dcdc_ops = { + .is_enabled = max8660_dcdc_is_enabled, + .list_voltage = max8660_dcdc_list, + .set_voltage = max8660_dcdc_set, + .get_voltage = max8660_dcdc_get, +}; + + +/* + * LDO5 functions + */ + +static int max8660_ldo5_list(struct regulator_dev *rdev, unsigned selector) +{ + if (selector > MAX8660_LDO5_MAX_SEL) + return -EINVAL; + return MAX8660_LDO5_MIN_UV + selector * MAX8660_LDO5_STEP; +} + +static int max8660_ldo5_get(struct regulator_dev *rdev) +{ + struct max8660 *max8660 = rdev_get_drvdata(rdev); + u8 selector = max8660->shadow_regs[MAX8660_MDTV2]; + + return MAX8660_LDO5_MIN_UV + selector * MAX8660_LDO5_STEP; +} + +static int max8660_ldo5_set(struct regulator_dev *rdev, int min_uV, int max_uV) +{ + struct max8660 *max8660 = rdev_get_drvdata(rdev); + u8 selector; + int ret; + + if (min_uV < MAX8660_LDO5_MIN_UV || min_uV > MAX8660_LDO5_MAX_UV) + return -EINVAL; + if (max_uV < MAX8660_LDO5_MIN_UV || max_uV > MAX8660_LDO5_MAX_UV) + return -EINVAL; + + selector = (min_uV - (MAX8660_LDO5_MIN_UV - MAX8660_LDO5_STEP + 1)) + / MAX8660_LDO5_STEP; + ret = max8660_ldo5_list(rdev, selector); + if (ret < 0 || ret > max_uV) + return -EINVAL; + + ret = max8660_write(max8660, MAX8660_MDTV2, 0, selector); + if (ret) + return ret; + + /* Select target voltage register and activate regulation */ + return max8660_write(max8660, MAX8660_VCC1, 0xff, 0xc0); +} + +static struct regulator_ops max8660_ldo5_ops = { + .list_voltage = max8660_ldo5_list, + .set_voltage = max8660_ldo5_set, + .get_voltage = max8660_ldo5_get, +}; + + +/* + * LDO67 functions + */ + +static int max8660_ldo67_is_enabled(struct regulator_dev *rdev) +{ + struct max8660 *max8660 = rdev_get_drvdata(rdev); + u8 val = max8660->shadow_regs[MAX8660_OVER2]; + u8 mask = (rdev_get_id(rdev) == MAX8660_V6) ? 2 : 4; + return !!(val & mask); +} + +static int max8660_ldo67_enable(struct regulator_dev *rdev) +{ + struct max8660 *max8660 = rdev_get_drvdata(rdev); + u8 bit = (rdev_get_id(rdev) == MAX8660_V6) ? 2 : 4; + return max8660_write(max8660, MAX8660_OVER2, 0xff, bit); +} + +static int max8660_ldo67_disable(struct regulator_dev *rdev) +{ + struct max8660 *max8660 = rdev_get_drvdata(rdev); + u8 mask = (rdev_get_id(rdev) == MAX8660_V6) ? ~2 : ~4; + return max8660_write(max8660, MAX8660_OVER2, mask, 0); +} + +static int max8660_ldo67_list(struct regulator_dev *rdev, unsigned selector) +{ + if (selector > MAX8660_LDO67_MAX_SEL) + return -EINVAL; + return MAX8660_LDO67_MIN_UV + selector * MAX8660_LDO67_STEP; +} + +static int max8660_ldo67_get(struct regulator_dev *rdev) +{ + struct max8660 *max8660 = rdev_get_drvdata(rdev); + u8 shift = (rdev_get_id(rdev) == MAX8660_V6) ? 0 : 4; + u8 selector = (max8660->shadow_regs[MAX8660_L12VCR] >> shift) & 0xf; + + return MAX8660_LDO67_MIN_UV + selector * MAX8660_LDO67_STEP; +} + +static int max8660_ldo67_set(struct regulator_dev *rdev, int min_uV, int max_uV) +{ + struct max8660 *max8660 = rdev_get_drvdata(rdev); + u8 selector; + int ret; + + if (min_uV < MAX8660_LDO67_MIN_UV || min_uV > MAX8660_LDO67_MAX_UV) + return -EINVAL; + if (max_uV < MAX8660_LDO67_MIN_UV || max_uV > MAX8660_LDO67_MAX_UV) + return -EINVAL; + + selector = (min_uV - (MAX8660_LDO67_MIN_UV - MAX8660_LDO67_STEP + 1)) + / MAX8660_LDO67_STEP; + + ret = max8660_ldo67_list(rdev, selector); + if (ret < 0 || ret > max_uV) + return -EINVAL; + + if (rdev_get_id(rdev) == MAX8660_V6) + return max8660_write(max8660, MAX8660_L12VCR, 0xf0, selector); + else + return max8660_write(max8660, MAX8660_L12VCR, 0x0f, selector << 4); +} + +static struct regulator_ops max8660_ldo67_ops = { + .is_enabled = max8660_ldo67_is_enabled, + .enable = max8660_ldo67_enable, + .disable = max8660_ldo67_disable, + .list_voltage = max8660_ldo67_list, + .get_voltage = max8660_ldo67_get, + .set_voltage = max8660_ldo67_set, +}; + +static struct regulator_desc max8660_reg[] = { + { + .name = "V3(DCDC)", + .id = MAX8660_V3, + .ops = &max8660_dcdc_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = MAX8660_DCDC_MAX_SEL + 1, + .owner = THIS_MODULE, + }, + { + .name = "V4(DCDC)", + .id = MAX8660_V4, + .ops = &max8660_dcdc_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = MAX8660_DCDC_MAX_SEL + 1, + .owner = THIS_MODULE, + }, + { + .name = "V5(LDO)", + .id = MAX8660_V5, + .ops = &max8660_ldo5_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = MAX8660_LDO5_MAX_SEL + 1, + .owner = THIS_MODULE, + }, + { + .name = "V6(LDO)", + .id = MAX8660_V6, + .ops = &max8660_ldo67_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = MAX8660_LDO67_MAX_SEL + 1, + .owner = THIS_MODULE, + }, + { + .name = "V7(LDO)", + .id = MAX8660_V7, + .ops = &max8660_ldo67_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = MAX8660_LDO67_MAX_SEL + 1, + .owner = THIS_MODULE, + }, +}; + +static int max8660_probe(struct i2c_client *client, + const struct i2c_device_id *i2c_id) +{ + struct regulator_dev **rdev; + struct max8660_platform_data *pdata = client->dev.platform_data; + struct max8660 *max8660; + int boot_on, i, id, ret = -EINVAL; + + if (pdata->num_subdevs > MAX8660_V_END) { + dev_err(&client->dev, "Too much regulators found!\n"); + goto out; + } + + max8660 = kzalloc(sizeof(struct max8660) + + sizeof(struct regulator_dev *) * MAX8660_V_END, + GFP_KERNEL); + if (!max8660) { + ret = -ENOMEM; + goto out; + } + + max8660->client = client; + rdev = max8660->rdev; + + if (pdata->en34_is_high) { + /* Simulate always on */ + max8660->shadow_regs[MAX8660_OVER1] = 5; + } else { + /* Otherwise devices can be toggled via software */ + max8660_dcdc_ops.enable = max8660_dcdc_enable; + max8660_dcdc_ops.disable = max8660_dcdc_disable; + } + + /* + * First, set up shadow registers to prevent glitches. As some + * registers are shared between regulators, everything must be properly + * set up for all regulators in advance. + */ + max8660->shadow_regs[MAX8660_ADTV1] = + max8660->shadow_regs[MAX8660_ADTV2] = + max8660->shadow_regs[MAX8660_SDTV1] = + max8660->shadow_regs[MAX8660_SDTV2] = 0x1b; + max8660->shadow_regs[MAX8660_MDTV1] = + max8660->shadow_regs[MAX8660_MDTV2] = 0x04; + + for (i = 0; i < pdata->num_subdevs; i++) { + + if (!pdata->subdevs[i].platform_data) + goto err_free; + + boot_on = pdata->subdevs[i].platform_data->constraints.boot_on; + + switch (pdata->subdevs[i].id) { + case MAX8660_V3: + if (boot_on) + max8660->shadow_regs[MAX8660_OVER1] |= 1; + break; + + case MAX8660_V4: + if (boot_on) + max8660->shadow_regs[MAX8660_OVER1] |= 4; + break; + + case MAX8660_V5: + break; + + case MAX8660_V6: + if (boot_on) + max8660->shadow_regs[MAX8660_OVER2] |= 2; + break; + + case MAX8660_V7: + if (!strcmp(i2c_id->name, "max8661")) { + dev_err(&client->dev, "Regulator not on this chip!\n"); + goto err_free; + } + + if (boot_on) + max8660->shadow_regs[MAX8660_OVER2] |= 4; + break; + + default: + dev_err(&client->dev, "invalid regulator %s\n", + pdata->subdevs[i].name); + goto err_free; + } + } + + /* Finally register devices */ + for (i = 0; i < pdata->num_subdevs; i++) { + + id = pdata->subdevs[i].id; + + rdev[i] = regulator_register(&max8660_reg[id], &client->dev, + pdata->subdevs[i].platform_data, + max8660); + if (IS_ERR(rdev[i])) { + ret = PTR_ERR(rdev[i]); + dev_err(&client->dev, "failed to register %s\n", + max8660_reg[id].name); + goto err_unregister; + } + } + + i2c_set_clientdata(client, rdev); + dev_info(&client->dev, "Maxim 8660/8661 regulator driver loaded\n"); + return 0; + +err_unregister: + while (--i >= 0) + regulator_unregister(rdev[i]); +err_free: + kfree(max8660); +out: + return ret; +} + +static int max8660_remove(struct i2c_client *client) +{ + struct regulator_dev **rdev = i2c_get_clientdata(client); + int i; + + for (i = 0; i < MAX8660_V_END; i++) + if (rdev[i]) + regulator_unregister(rdev[i]); + kfree(rdev); + i2c_set_clientdata(client, NULL); + + return 0; +} + +static const struct i2c_device_id max8660_id[] = { + { "max8660", 0 }, + { "max8661", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, max8660_id); + +static struct i2c_driver max8660_driver = { + .probe = max8660_probe, + .remove = max8660_remove, + .driver = { + .name = "max8660", + }, + .id_table = max8660_id, +}; + +static int __init max8660_init(void) +{ + return i2c_add_driver(&max8660_driver); +} +subsys_initcall(max8660_init); + +static void __exit max8660_exit(void) +{ + i2c_del_driver(&max8660_driver); +} +module_exit(max8660_exit); + +/* Module information */ +MODULE_DESCRIPTION("MAXIM 8660/8661 voltage regulator driver"); +MODULE_AUTHOR("Wolfram Sang"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/regulator/mc13783-regulator.c b/drivers/regulator/mc13783-regulator.c new file mode 100644 index 000000000000..39c495300045 --- /dev/null +++ b/drivers/regulator/mc13783-regulator.c @@ -0,0 +1,245 @@ +/* + * Regulator Driver for Freescale MC13783 PMIC + * + * Copyright (C) 2008 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/mfd/mc13783.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/driver.h> +#include <linux/platform_device.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/err.h> + +#define MC13783_REG_SWITCHERS4 28 +#define MC13783_REG_SWITCHERS4_PLLEN (1 << 18) + +#define MC13783_REG_SWITCHERS5 29 +#define MC13783_REG_SWITCHERS5_SW3EN (1 << 20) + +#define MC13783_REG_REGULATORMODE0 32 +#define MC13783_REG_REGULATORMODE0_VAUDIOEN (1 << 0) +#define MC13783_REG_REGULATORMODE0_VIOHIEN (1 << 3) +#define MC13783_REG_REGULATORMODE0_VIOLOEN (1 << 6) +#define MC13783_REG_REGULATORMODE0_VDIGEN (1 << 9) +#define MC13783_REG_REGULATORMODE0_VGENEN (1 << 12) +#define MC13783_REG_REGULATORMODE0_VRFDIGEN (1 << 15) +#define MC13783_REG_REGULATORMODE0_VRFREFEN (1 << 18) +#define MC13783_REG_REGULATORMODE0_VRFCPEN (1 << 21) + +#define MC13783_REG_REGULATORMODE1 33 +#define MC13783_REG_REGULATORMODE1_VSIMEN (1 << 0) +#define MC13783_REG_REGULATORMODE1_VESIMEN (1 << 3) +#define MC13783_REG_REGULATORMODE1_VCAMEN (1 << 6) +#define MC13783_REG_REGULATORMODE1_VRFBGEN (1 << 9) +#define MC13783_REG_REGULATORMODE1_VVIBEN (1 << 11) +#define MC13783_REG_REGULATORMODE1_VRF1EN (1 << 12) +#define MC13783_REG_REGULATORMODE1_VRF2EN (1 << 15) +#define MC13783_REG_REGULATORMODE1_VMMC1EN (1 << 18) +#define MC13783_REG_REGULATORMODE1_VMMC2EN (1 << 21) + +#define MC13783_REG_POWERMISC 34 +#define MC13783_REG_POWERMISC_GPO1EN (1 << 6) +#define MC13783_REG_POWERMISC_GPO2EN (1 << 8) +#define MC13783_REG_POWERMISC_GPO3EN (1 << 10) +#define MC13783_REG_POWERMISC_GPO4EN (1 << 12) + +struct mc13783_regulator { + struct regulator_desc desc; + int reg; + int enable_bit; +}; + +static struct regulator_ops mc13783_regulator_ops; + +#define MC13783_DEFINE(prefix, _name, _reg) \ + [MC13783_ ## prefix ## _ ## _name] = { \ + .desc = { \ + .name = #prefix "_" #_name, \ + .ops = &mc13783_regulator_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = MC13783_ ## prefix ## _ ## _name, \ + .owner = THIS_MODULE, \ + }, \ + .reg = MC13783_REG_ ## _reg, \ + .enable_bit = MC13783_REG_ ## _reg ## _ ## _name ## EN, \ + } + +#define MC13783_DEFINE_SW(_name, _reg) MC13783_DEFINE(SW, _name, _reg) +#define MC13783_DEFINE_REGU(_name, _reg) MC13783_DEFINE(REGU, _name, _reg) + +static struct mc13783_regulator mc13783_regulators[] = { + MC13783_DEFINE_SW(SW3, SWITCHERS5), + MC13783_DEFINE_SW(PLL, SWITCHERS4), + + MC13783_DEFINE_REGU(VAUDIO, REGULATORMODE0), + MC13783_DEFINE_REGU(VIOHI, REGULATORMODE0), + MC13783_DEFINE_REGU(VIOLO, REGULATORMODE0), + MC13783_DEFINE_REGU(VDIG, REGULATORMODE0), + MC13783_DEFINE_REGU(VGEN, REGULATORMODE0), + MC13783_DEFINE_REGU(VRFDIG, REGULATORMODE0), + MC13783_DEFINE_REGU(VRFREF, REGULATORMODE0), + MC13783_DEFINE_REGU(VRFCP, REGULATORMODE0), + MC13783_DEFINE_REGU(VSIM, REGULATORMODE1), + MC13783_DEFINE_REGU(VESIM, REGULATORMODE1), + MC13783_DEFINE_REGU(VCAM, REGULATORMODE1), + MC13783_DEFINE_REGU(VRFBG, REGULATORMODE1), + MC13783_DEFINE_REGU(VVIB, REGULATORMODE1), + MC13783_DEFINE_REGU(VRF1, REGULATORMODE1), + MC13783_DEFINE_REGU(VRF2, REGULATORMODE1), + MC13783_DEFINE_REGU(VMMC1, REGULATORMODE1), + MC13783_DEFINE_REGU(VMMC2, REGULATORMODE1), + MC13783_DEFINE_REGU(GPO1, POWERMISC), + MC13783_DEFINE_REGU(GPO2, POWERMISC), + MC13783_DEFINE_REGU(GPO3, POWERMISC), + MC13783_DEFINE_REGU(GPO4, POWERMISC), +}; + +struct mc13783_regulator_priv { + struct mc13783 *mc13783; + struct regulator_dev *regulators[]; +}; + +static int mc13783_regulator_enable(struct regulator_dev *rdev) +{ + struct mc13783_regulator_priv *priv = rdev_get_drvdata(rdev); + int id = rdev_get_id(rdev); + int ret; + + dev_dbg(rdev_get_dev(rdev), "%s id: %d\n", __func__, id); + + mc13783_lock(priv->mc13783); + ret = mc13783_reg_rmw(priv->mc13783, mc13783_regulators[id].reg, + mc13783_regulators[id].enable_bit, + mc13783_regulators[id].enable_bit); + mc13783_unlock(priv->mc13783); + + return ret; +} + +static int mc13783_regulator_disable(struct regulator_dev *rdev) +{ + struct mc13783_regulator_priv *priv = rdev_get_drvdata(rdev); + int id = rdev_get_id(rdev); + int ret; + + dev_dbg(rdev_get_dev(rdev), "%s id: %d\n", __func__, id); + + mc13783_lock(priv->mc13783); + ret = mc13783_reg_rmw(priv->mc13783, mc13783_regulators[id].reg, + mc13783_regulators[id].enable_bit, 0); + mc13783_unlock(priv->mc13783); + + return ret; +} + +static int mc13783_regulator_is_enabled(struct regulator_dev *rdev) +{ + struct mc13783_regulator_priv *priv = rdev_get_drvdata(rdev); + int ret, id = rdev_get_id(rdev); + unsigned int val; + + mc13783_lock(priv->mc13783); + ret = mc13783_reg_read(priv->mc13783, mc13783_regulators[id].reg, &val); + mc13783_unlock(priv->mc13783); + + if (ret) + return ret; + + return (val & mc13783_regulators[id].enable_bit) != 0; +} + +static struct regulator_ops mc13783_regulator_ops = { + .enable = mc13783_regulator_enable, + .disable = mc13783_regulator_disable, + .is_enabled = mc13783_regulator_is_enabled, +}; + +static int __devinit mc13783_regulator_probe(struct platform_device *pdev) +{ + struct mc13783_regulator_priv *priv; + struct mc13783 *mc13783 = dev_get_drvdata(pdev->dev.parent); + struct mc13783_regulator_platform_data *pdata = + dev_get_platdata(&pdev->dev); + struct mc13783_regulator_init_data *init_data; + int i, ret; + + dev_dbg(&pdev->dev, "mc13783_regulator_probe id %d\n", pdev->id); + + priv = kzalloc(sizeof(*priv) + + pdata->num_regulators * sizeof(priv->regulators[0]), + GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->mc13783 = mc13783; + + for (i = 0; i < pdata->num_regulators; i++) { + init_data = &pdata->regulators[i]; + priv->regulators[i] = regulator_register( + &mc13783_regulators[init_data->id].desc, + &pdev->dev, init_data->init_data, priv); + + if (IS_ERR(priv->regulators[i])) { + dev_err(&pdev->dev, "failed to register regulator %s\n", + mc13783_regulators[i].desc.name); + ret = PTR_ERR(priv->regulators[i]); + goto err; + } + } + + platform_set_drvdata(pdev, priv); + + return 0; +err: + while (--i >= 0) + regulator_unregister(priv->regulators[i]); + + kfree(priv); + + return ret; +} + +static int __devexit mc13783_regulator_remove(struct platform_device *pdev) +{ + struct mc13783_regulator_priv *priv = platform_get_drvdata(pdev); + struct mc13783_regulator_platform_data *pdata = + dev_get_platdata(&pdev->dev); + int i; + + for (i = 0; i < pdata->num_regulators; i++) + regulator_unregister(priv->regulators[i]); + + return 0; +} + +static struct platform_driver mc13783_regulator_driver = { + .driver = { + .name = "mc13783-regulator", + .owner = THIS_MODULE, + }, + .remove = __devexit_p(mc13783_regulator_remove), + .probe = mc13783_regulator_probe, +}; + +static int __init mc13783_regulator_init(void) +{ + return platform_driver_register(&mc13783_regulator_driver); +} +subsys_initcall(mc13783_regulator_init); + +static void __exit mc13783_regulator_exit(void) +{ + platform_driver_unregister(&mc13783_regulator_driver); +} +module_exit(mc13783_regulator_exit); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de"); +MODULE_DESCRIPTION("Regulator Driver for Freescale MC13783 PMIC"); +MODULE_ALIAS("platform:mc13783-regulator"); diff --git a/drivers/regulator/mc13783.c b/drivers/regulator/mc13783.c deleted file mode 100644 index 710211f67449..000000000000 --- a/drivers/regulator/mc13783.c +++ /dev/null @@ -1,410 +0,0 @@ -/* - * Regulator Driver for Freescale MC13783 PMIC - * - * Copyright (C) 2008 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/mfd/mc13783-private.h> -#include <linux/regulator/machine.h> -#include <linux/regulator/driver.h> -#include <linux/platform_device.h> -#include <linux/mfd/mc13783.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/err.h> - -struct mc13783_regulator { - struct regulator_desc desc; - int reg; - int enable_bit; -}; - -static struct regulator_ops mc13783_regulator_ops; - -static struct mc13783_regulator mc13783_regulators[] = { - [MC13783_SW_SW3] = { - .desc = { - .name = "SW_SW3", - .ops = &mc13783_regulator_ops, - .type = REGULATOR_VOLTAGE, - .id = MC13783_SW_SW3, - .owner = THIS_MODULE, - }, - .reg = MC13783_REG_SWITCHERS_5, - .enable_bit = MC13783_SWCTRL_SW3_EN, - }, - [MC13783_SW_PLL] = { - .desc = { - .name = "SW_PLL", - .ops = &mc13783_regulator_ops, - .type = REGULATOR_VOLTAGE, - .id = MC13783_SW_PLL, - .owner = THIS_MODULE, - }, - .reg = MC13783_REG_SWITCHERS_4, - .enable_bit = MC13783_SWCTRL_PLL_EN, - }, - [MC13783_REGU_VAUDIO] = { - .desc = { - .name = "REGU_VAUDIO", - .ops = &mc13783_regulator_ops, - .type = REGULATOR_VOLTAGE, - .id = MC13783_REGU_VAUDIO, - .owner = THIS_MODULE, - }, - .reg = MC13783_REG_REGULATOR_MODE_0, - .enable_bit = MC13783_REGCTRL_VAUDIO_EN, - }, - [MC13783_REGU_VIOHI] = { - .desc = { - .name = "REGU_VIOHI", - .ops = &mc13783_regulator_ops, - .type = REGULATOR_VOLTAGE, - .id = MC13783_REGU_VIOHI, - .owner = THIS_MODULE, - }, - .reg = MC13783_REG_REGULATOR_MODE_0, - .enable_bit = MC13783_REGCTRL_VIOHI_EN, - }, - [MC13783_REGU_VIOLO] = { - .desc = { - .name = "REGU_VIOLO", - .ops = &mc13783_regulator_ops, - .type = REGULATOR_VOLTAGE, - .id = MC13783_REGU_VIOLO, - .owner = THIS_MODULE, - }, - .reg = MC13783_REG_REGULATOR_MODE_0, - .enable_bit = MC13783_REGCTRL_VIOLO_EN, - }, - [MC13783_REGU_VDIG] = { - .desc = { - .name = "REGU_VDIG", - .ops = &mc13783_regulator_ops, - .type = REGULATOR_VOLTAGE, - .id = MC13783_REGU_VDIG, - .owner = THIS_MODULE, - }, - .reg = MC13783_REG_REGULATOR_MODE_0, - .enable_bit = MC13783_REGCTRL_VDIG_EN, - }, - [MC13783_REGU_VGEN] = { - .desc = { - .name = "REGU_VGEN", - .ops = &mc13783_regulator_ops, - .type = REGULATOR_VOLTAGE, - .id = MC13783_REGU_VGEN, - .owner = THIS_MODULE, - }, - .reg = MC13783_REG_REGULATOR_MODE_0, - .enable_bit = MC13783_REGCTRL_VGEN_EN, - }, - [MC13783_REGU_VRFDIG] = { - .desc = { - .name = "REGU_VRFDIG", - .ops = &mc13783_regulator_ops, - .type = REGULATOR_VOLTAGE, - .id = MC13783_REGU_VRFDIG, - .owner = THIS_MODULE, - }, - .reg = MC13783_REG_REGULATOR_MODE_0, - .enable_bit = MC13783_REGCTRL_VRFDIG_EN, - }, - [MC13783_REGU_VRFREF] = { - .desc = { - .name = "REGU_VRFREF", - .ops = &mc13783_regulator_ops, - .type = REGULATOR_VOLTAGE, - .id = MC13783_REGU_VRFREF, - .owner = THIS_MODULE, - }, - .reg = MC13783_REG_REGULATOR_MODE_0, - .enable_bit = MC13783_REGCTRL_VRFREF_EN, - }, - [MC13783_REGU_VRFCP] = { - .desc = { - .name = "REGU_VRFCP", - .ops = &mc13783_regulator_ops, - .type = REGULATOR_VOLTAGE, - .id = MC13783_REGU_VRFCP, - .owner = THIS_MODULE, - }, - .reg = MC13783_REG_REGULATOR_MODE_0, - .enable_bit = MC13783_REGCTRL_VRFCP_EN, - }, - [MC13783_REGU_VSIM] = { - .desc = { - .name = "REGU_VSIM", - .ops = &mc13783_regulator_ops, - .type = REGULATOR_VOLTAGE, - .id = MC13783_REGU_VSIM, - .owner = THIS_MODULE, - }, - .reg = MC13783_REG_REGULATOR_MODE_1, - .enable_bit = MC13783_REGCTRL_VSIM_EN, - }, - [MC13783_REGU_VESIM] = { - .desc = { - .name = "REGU_VESIM", - .ops = &mc13783_regulator_ops, - .type = REGULATOR_VOLTAGE, - .id = MC13783_REGU_VESIM, - .owner = THIS_MODULE, - }, - .reg = MC13783_REG_REGULATOR_MODE_1, - .enable_bit = MC13783_REGCTRL_VESIM_EN, - }, - [MC13783_REGU_VCAM] = { - .desc = { - .name = "REGU_VCAM", - .ops = &mc13783_regulator_ops, - .type = REGULATOR_VOLTAGE, - .id = MC13783_REGU_VCAM, - .owner = THIS_MODULE, - }, - .reg = MC13783_REG_REGULATOR_MODE_1, - .enable_bit = MC13783_REGCTRL_VCAM_EN, - }, - [MC13783_REGU_VRFBG] = { - .desc = { - .name = "REGU_VRFBG", - .ops = &mc13783_regulator_ops, - .type = REGULATOR_VOLTAGE, - .id = MC13783_REGU_VRFBG, - .owner = THIS_MODULE, - }, - .reg = MC13783_REG_REGULATOR_MODE_1, - .enable_bit = MC13783_REGCTRL_VRFBG_EN, - }, - [MC13783_REGU_VVIB] = { - .desc = { - .name = "REGU_VVIB", - .ops = &mc13783_regulator_ops, - .type = REGULATOR_VOLTAGE, - .id = MC13783_REGU_VVIB, - .owner = THIS_MODULE, - }, - .reg = MC13783_REG_REGULATOR_MODE_1, - .enable_bit = MC13783_REGCTRL_VVIB_EN, - }, - [MC13783_REGU_VRF1] = { - .desc = { - .name = "REGU_VRF1", - .ops = &mc13783_regulator_ops, - .type = REGULATOR_VOLTAGE, - .id = MC13783_REGU_VRF1, - .owner = THIS_MODULE, - }, - .reg = MC13783_REG_REGULATOR_MODE_1, - .enable_bit = MC13783_REGCTRL_VRF1_EN, - }, - [MC13783_REGU_VRF2] = { - .desc = { - .name = "REGU_VRF2", - .ops = &mc13783_regulator_ops, - .type = REGULATOR_VOLTAGE, - .id = MC13783_REGU_VRF2, - .owner = THIS_MODULE, - }, - .reg = MC13783_REG_REGULATOR_MODE_1, - .enable_bit = MC13783_REGCTRL_VRF2_EN, - }, - [MC13783_REGU_VMMC1] = { - .desc = { - .name = "REGU_VMMC1", - .ops = &mc13783_regulator_ops, - .type = REGULATOR_VOLTAGE, - .id = MC13783_REGU_VMMC1, - .owner = THIS_MODULE, - }, - .reg = MC13783_REG_REGULATOR_MODE_1, - .enable_bit = MC13783_REGCTRL_VMMC1_EN, - }, - [MC13783_REGU_VMMC2] = { - .desc = { - .name = "REGU_VMMC2", - .ops = &mc13783_regulator_ops, - .type = REGULATOR_VOLTAGE, - .id = MC13783_REGU_VMMC2, - .owner = THIS_MODULE, - }, - .reg = MC13783_REG_REGULATOR_MODE_1, - .enable_bit = MC13783_REGCTRL_VMMC2_EN, - }, - [MC13783_REGU_GPO1] = { - .desc = { - .name = "REGU_GPO1", - .ops = &mc13783_regulator_ops, - .type = REGULATOR_VOLTAGE, - .id = MC13783_REGU_GPO1, - .owner = THIS_MODULE, - }, - .reg = MC13783_REG_POWER_MISCELLANEOUS, - .enable_bit = MC13783_REGCTRL_GPO1_EN, - }, - [MC13783_REGU_GPO2] = { - .desc = { - .name = "REGU_GPO2", - .ops = &mc13783_regulator_ops, - .type = REGULATOR_VOLTAGE, - .id = MC13783_REGU_GPO2, - .owner = THIS_MODULE, - }, - .reg = MC13783_REG_POWER_MISCELLANEOUS, - .enable_bit = MC13783_REGCTRL_GPO2_EN, - }, - [MC13783_REGU_GPO3] = { - .desc = { - .name = "REGU_GPO3", - .ops = &mc13783_regulator_ops, - .type = REGULATOR_VOLTAGE, - .id = MC13783_REGU_GPO3, - .owner = THIS_MODULE, - }, - .reg = MC13783_REG_POWER_MISCELLANEOUS, - .enable_bit = MC13783_REGCTRL_GPO3_EN, - }, - [MC13783_REGU_GPO4] = { - .desc = { - .name = "REGU_GPO4", - .ops = &mc13783_regulator_ops, - .type = REGULATOR_VOLTAGE, - .id = MC13783_REGU_GPO4, - .owner = THIS_MODULE, - }, - .reg = MC13783_REG_POWER_MISCELLANEOUS, - .enable_bit = MC13783_REGCTRL_GPO4_EN, - }, -}; - -struct mc13783_priv { - struct regulator_desc desc[ARRAY_SIZE(mc13783_regulators)]; - struct mc13783 *mc13783; - struct regulator_dev *regulators[0]; -}; - -static int mc13783_enable(struct regulator_dev *rdev) -{ - struct mc13783_priv *priv = rdev_get_drvdata(rdev); - int id = rdev_get_id(rdev); - - dev_dbg(rdev_get_dev(rdev), "%s id: %d\n", __func__, id); - - return mc13783_set_bits(priv->mc13783, mc13783_regulators[id].reg, - mc13783_regulators[id].enable_bit, - mc13783_regulators[id].enable_bit); -} - -static int mc13783_disable(struct regulator_dev *rdev) -{ - struct mc13783_priv *priv = rdev_get_drvdata(rdev); - int id = rdev_get_id(rdev); - - dev_dbg(rdev_get_dev(rdev), "%s id: %d\n", __func__, id); - - return mc13783_set_bits(priv->mc13783, mc13783_regulators[id].reg, - mc13783_regulators[id].enable_bit, 0); -} - -static int mc13783_is_enabled(struct regulator_dev *rdev) -{ - struct mc13783_priv *priv = rdev_get_drvdata(rdev); - int ret, id = rdev_get_id(rdev); - unsigned int val; - - ret = mc13783_reg_read(priv->mc13783, mc13783_regulators[id].reg, &val); - if (ret) - return ret; - - return (val & mc13783_regulators[id].enable_bit) != 0; -} - -static struct regulator_ops mc13783_regulator_ops = { - .enable = mc13783_enable, - .disable = mc13783_disable, - .is_enabled = mc13783_is_enabled, -}; - -static int __devinit mc13783_regulator_probe(struct platform_device *pdev) -{ - struct mc13783_priv *priv; - struct mc13783 *mc13783 = dev_get_drvdata(pdev->dev.parent); - struct mc13783_regulator_init_data *init_data; - int i, ret; - - dev_dbg(&pdev->dev, "mc13783_regulator_probe id %d\n", pdev->id); - - priv = kzalloc(sizeof(*priv) + mc13783->num_regulators * sizeof(void *), - GFP_KERNEL); - if (!priv) - return -ENOMEM; - - priv->mc13783 = mc13783; - - for (i = 0; i < mc13783->num_regulators; i++) { - init_data = &mc13783->regulators[i]; - priv->regulators[i] = regulator_register( - &mc13783_regulators[init_data->id].desc, - &pdev->dev, init_data->init_data, priv); - - if (IS_ERR(priv->regulators[i])) { - dev_err(&pdev->dev, "failed to register regulator %s\n", - mc13783_regulators[i].desc.name); - ret = PTR_ERR(priv->regulators[i]); - goto err; - } - } - - platform_set_drvdata(pdev, priv); - - return 0; -err: - while (--i >= 0) - regulator_unregister(priv->regulators[i]); - - kfree(priv); - - return ret; -} - -static int __devexit mc13783_regulator_remove(struct platform_device *pdev) -{ - struct mc13783_priv *priv = platform_get_drvdata(pdev); - struct mc13783 *mc13783 = priv->mc13783; - int i; - - for (i = 0; i < mc13783->num_regulators; i++) - regulator_unregister(priv->regulators[i]); - - return 0; -} - -static struct platform_driver mc13783_regulator_driver = { - .driver = { - .name = "mc13783-regulator", - .owner = THIS_MODULE, - }, - .remove = __devexit_p(mc13783_regulator_remove), -}; - -static int __init mc13783_regulator_init(void) -{ - return platform_driver_probe(&mc13783_regulator_driver, - mc13783_regulator_probe); -} -subsys_initcall(mc13783_regulator_init); - -static void __exit mc13783_regulator_exit(void) -{ - platform_driver_unregister(&mc13783_regulator_driver); -} -module_exit(mc13783_regulator_exit); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de"); -MODULE_DESCRIPTION("Regulator Driver for Freescale MC13783 PMIC"); -MODULE_ALIAS("platform:mc13783-regulator"); diff --git a/drivers/regulator/twl-regulator.c b/drivers/regulator/twl-regulator.c index 7ea1c3a31081..7e674859bd59 100644 --- a/drivers/regulator/twl-regulator.c +++ b/drivers/regulator/twl-regulator.c @@ -12,6 +12,7 @@ #include <linux/module.h> #include <linux/init.h> #include <linux/err.h> +#include <linux/delay.h> #include <linux/platform_device.h> #include <linux/regulator/driver.h> #include <linux/regulator/machine.h> @@ -40,6 +41,12 @@ struct twlreg_info { u8 table_len; const u16 *table; + /* regulator specific turn-on delay */ + u16 delay; + + /* State REMAP default configuration */ + u8 remap; + /* chip constraints on regulator behavior */ u16 min_mV; @@ -128,6 +135,7 @@ static int twlreg_enable(struct regulator_dev *rdev) { struct twlreg_info *info = rdev_get_drvdata(rdev); int grp; + int ret; grp = twlreg_read(info, TWL_MODULE_PM_RECEIVER, VREG_GRP); if (grp < 0) @@ -138,7 +146,11 @@ static int twlreg_enable(struct regulator_dev *rdev) else grp |= P1_GRP_6030; - return twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_GRP, grp); + ret = twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_GRP, grp); + + udelay(info->delay); + + return ret; } static int twlreg_disable(struct regulator_dev *rdev) @@ -151,9 +163,9 @@ static int twlreg_disable(struct regulator_dev *rdev) return grp; if (twl_class_is_4030()) - grp &= ~P1_GRP_4030; + grp &= ~(P1_GRP_4030 | P2_GRP_4030 | P3_GRP_4030); else - grp &= ~P1_GRP_6030; + grp &= ~(P1_GRP_6030 | P2_GRP_6030 | P3_GRP_6030); return twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_GRP, grp); } @@ -294,6 +306,18 @@ static const u16 VSIM_VSEL_table[] = { static const u16 VDAC_VSEL_table[] = { 1200, 1300, 1800, 1800, }; +static const u16 VDD1_VSEL_table[] = { + 800, 1450, +}; +static const u16 VDD2_VSEL_table[] = { + 800, 1450, 1500, +}; +static const u16 VIO_VSEL_table[] = { + 1800, 1850, +}; +static const u16 VINTANA2_VSEL_table[] = { + 2500, 2750, +}; static const u16 VAUX1_6030_VSEL_table[] = { 1000, 1300, 1800, 2500, 2800, 2900, 3000, 3000, @@ -414,20 +438,30 @@ static struct regulator_ops twlfixed_ops = { /*----------------------------------------------------------------------*/ -#define TWL4030_ADJUSTABLE_LDO(label, offset, num) \ - TWL_ADJUSTABLE_LDO(label, offset, num, TWL4030) -#define TWL4030_FIXED_LDO(label, offset, mVolts, num) \ - TWL_FIXED_LDO(label, offset, mVolts, num, TWL4030) -#define TWL6030_ADJUSTABLE_LDO(label, offset, num) \ - TWL_ADJUSTABLE_LDO(label, offset, num, TWL6030) -#define TWL6030_FIXED_LDO(label, offset, mVolts, num) \ - TWL_FIXED_LDO(label, offset, mVolts, num, TWL6030) - -#define TWL_ADJUSTABLE_LDO(label, offset, num, family) { \ +#define TWL4030_ADJUSTABLE_LDO(label, offset, num, turnon_delay, remap_conf) \ + TWL_ADJUSTABLE_LDO(label, offset, num, turnon_delay, \ + remap_conf, TWL4030) +#define TWL4030_FIXED_LDO(label, offset, mVolts, num, turnon_delay, \ + remap_conf) \ + TWL_FIXED_LDO(label, offset, mVolts, num, turnon_delay, \ + remap_conf, TWL4030) +#define TWL6030_ADJUSTABLE_LDO(label, offset, num, turnon_delay, \ + remap_conf) \ + TWL_ADJUSTABLE_LDO(label, offset, num, turnon_delay, \ + remap_conf, TWL6030) +#define TWL6030_FIXED_LDO(label, offset, mVolts, num, turnon_delay, \ + remap_conf) \ + TWL_FIXED_LDO(label, offset, mVolts, num, turnon_delay, \ + remap_conf, TWL6030) + +#define TWL_ADJUSTABLE_LDO(label, offset, num, turnon_delay, remap_conf, \ + family) { \ .base = offset, \ .id = num, \ .table_len = ARRAY_SIZE(label##_VSEL_table), \ .table = label##_VSEL_table, \ + .delay = turnon_delay, \ + .remap = remap_conf, \ .desc = { \ .name = #label, \ .id = family##_REG_##label, \ @@ -438,10 +472,13 @@ static struct regulator_ops twlfixed_ops = { }, \ } -#define TWL_FIXED_LDO(label, offset, mVolts, num, family) { \ +#define TWL_FIXED_LDO(label, offset, mVolts, num, turnon_delay, remap_conf, \ + family) { \ .base = offset, \ .id = num, \ .min_mV = mVolts, \ + .delay = turnon_delay, \ + .remap = remap_conf, \ .desc = { \ .name = #label, \ .id = family##_REG_##label, \ @@ -457,43 +494,41 @@ static struct regulator_ops twlfixed_ops = { * software control over them after boot. */ static struct twlreg_info twl_regs[] = { - TWL4030_ADJUSTABLE_LDO(VAUX1, 0x17, 1), - TWL4030_ADJUSTABLE_LDO(VAUX2_4030, 0x1b, 2), - TWL4030_ADJUSTABLE_LDO(VAUX2, 0x1b, 2), - TWL4030_ADJUSTABLE_LDO(VAUX3, 0x1f, 3), - TWL4030_ADJUSTABLE_LDO(VAUX4, 0x23, 4), - TWL4030_ADJUSTABLE_LDO(VMMC1, 0x27, 5), - TWL4030_ADJUSTABLE_LDO(VMMC2, 0x2b, 6), - /* - TWL4030_ADJUSTABLE_LDO(VPLL1, 0x2f, 7), - */ - TWL4030_ADJUSTABLE_LDO(VPLL2, 0x33, 8), - TWL4030_ADJUSTABLE_LDO(VSIM, 0x37, 9), - TWL4030_ADJUSTABLE_LDO(VDAC, 0x3b, 10), - /* - TWL4030_ADJUSTABLE_LDO(VINTANA1, 0x3f, 11), - TWL4030_ADJUSTABLE_LDO(VINTANA2, 0x43, 12), - TWL4030_ADJUSTABLE_LDO(VINTDIG, 0x47, 13), - TWL4030_SMPS(VIO, 0x4b, 14), - TWL4030_SMPS(VDD1, 0x55, 15), - TWL4030_SMPS(VDD2, 0x63, 16), - */ - TWL4030_FIXED_LDO(VUSB1V5, 0x71, 1500, 17), - TWL4030_FIXED_LDO(VUSB1V8, 0x74, 1800, 18), - TWL4030_FIXED_LDO(VUSB3V1, 0x77, 3100, 19), + TWL4030_ADJUSTABLE_LDO(VAUX1, 0x17, 1, 100, 0x08), + TWL4030_ADJUSTABLE_LDO(VAUX2_4030, 0x1b, 2, 100, 0x08), + TWL4030_ADJUSTABLE_LDO(VAUX2, 0x1b, 2, 100, 0x08), + TWL4030_ADJUSTABLE_LDO(VAUX3, 0x1f, 3, 100, 0x08), + TWL4030_ADJUSTABLE_LDO(VAUX4, 0x23, 4, 100, 0x08), + TWL4030_ADJUSTABLE_LDO(VMMC1, 0x27, 5, 100, 0x08), + TWL4030_ADJUSTABLE_LDO(VMMC2, 0x2b, 6, 100, 0x08), + TWL4030_ADJUSTABLE_LDO(VPLL1, 0x2f, 7, 100, 0x00), + TWL4030_ADJUSTABLE_LDO(VPLL2, 0x33, 8, 100, 0x08), + TWL4030_ADJUSTABLE_LDO(VSIM, 0x37, 9, 100, 0x00), + TWL4030_ADJUSTABLE_LDO(VDAC, 0x3b, 10, 100, 0x08), + TWL4030_FIXED_LDO(VINTANA1, 0x3f, 1500, 11, 100, 0x08), + TWL4030_ADJUSTABLE_LDO(VINTANA2, 0x43, 12, 100, 0x08), + TWL4030_FIXED_LDO(VINTDIG, 0x47, 1500, 13, 100, 0x08), + TWL4030_ADJUSTABLE_LDO(VIO, 0x4b, 14, 1000, 0x08), + TWL4030_ADJUSTABLE_LDO(VDD1, 0x55, 15, 1000, 0x08), + TWL4030_ADJUSTABLE_LDO(VDD2, 0x63, 16, 1000, 0x08), + TWL4030_FIXED_LDO(VUSB1V5, 0x71, 1500, 17, 100, 0x08), + TWL4030_FIXED_LDO(VUSB1V8, 0x74, 1800, 18, 100, 0x08), + TWL4030_FIXED_LDO(VUSB3V1, 0x77, 3100, 19, 150, 0x08), /* VUSBCP is managed *only* by the USB subchip */ /* 6030 REG with base as PMC Slave Misc : 0x0030 */ - TWL6030_ADJUSTABLE_LDO(VAUX1_6030, 0x54, 1), - TWL6030_ADJUSTABLE_LDO(VAUX2_6030, 0x58, 2), - TWL6030_ADJUSTABLE_LDO(VAUX3_6030, 0x5c, 3), - TWL6030_ADJUSTABLE_LDO(VMMC, 0x68, 4), - TWL6030_ADJUSTABLE_LDO(VPP, 0x6c, 5), - TWL6030_ADJUSTABLE_LDO(VUSIM, 0x74, 7), - TWL6030_FIXED_LDO(VANA, 0x50, 2100, 15), - TWL6030_FIXED_LDO(VCXIO, 0x60, 1800, 16), - TWL6030_FIXED_LDO(VDAC, 0x64, 1800, 17), - TWL6030_FIXED_LDO(VUSB, 0x70, 3300, 18) + /* Turnon-delay and remap configuration values for 6030 are not + verified since the specification is not public */ + TWL6030_ADJUSTABLE_LDO(VAUX1_6030, 0x54, 1, 0, 0x08), + TWL6030_ADJUSTABLE_LDO(VAUX2_6030, 0x58, 2, 0, 0x08), + TWL6030_ADJUSTABLE_LDO(VAUX3_6030, 0x5c, 3, 0, 0x08), + TWL6030_ADJUSTABLE_LDO(VMMC, 0x68, 4, 0, 0x08), + TWL6030_ADJUSTABLE_LDO(VPP, 0x6c, 5, 0, 0x08), + TWL6030_ADJUSTABLE_LDO(VUSIM, 0x74, 7, 0, 0x08), + TWL6030_FIXED_LDO(VANA, 0x50, 2100, 15, 0, 0x08), + TWL6030_FIXED_LDO(VCXIO, 0x60, 1800, 16, 0, 0x08), + TWL6030_FIXED_LDO(VDAC, 0x64, 1800, 17, 0, 0x08), + TWL6030_FIXED_LDO(VUSB, 0x70, 3300, 18, 0, 0x08) }; static int twlreg_probe(struct platform_device *pdev) @@ -525,6 +560,19 @@ static int twlreg_probe(struct platform_device *pdev) c->valid_ops_mask &= REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS; + switch (pdev->id) { + case TWL4030_REG_VIO: + case TWL4030_REG_VDD1: + case TWL4030_REG_VDD2: + case TWL4030_REG_VPLL1: + case TWL4030_REG_VINTANA1: + case TWL4030_REG_VINTANA2: + case TWL4030_REG_VINTDIG: + c->always_on = true; + break; + default: + break; + } rdev = regulator_register(&info->desc, &pdev->dev, initdata, info); if (IS_ERR(rdev)) { @@ -534,6 +582,9 @@ static int twlreg_probe(struct platform_device *pdev) } platform_set_drvdata(pdev, rdev); + twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_REMAP, + info->remap); + /* NOTE: many regulators support short-circuit IRQs (presentable * as REGULATOR_OVER_CURRENT notifications?) configured via: * - SC_CONFIG diff --git a/drivers/regulator/wm831x-dcdc.c b/drivers/regulator/wm831x-dcdc.c index 2eefc1a0cf08..0a6577577e8d 100644 --- a/drivers/regulator/wm831x-dcdc.c +++ b/drivers/regulator/wm831x-dcdc.c @@ -19,6 +19,8 @@ #include <linux/i2c.h> #include <linux/platform_device.h> #include <linux/regulator/driver.h> +#include <linux/regulator/machine.h> +#include <linux/gpio.h> #include <linux/mfd/wm831x/core.h> #include <linux/mfd/wm831x/regulator.h> @@ -39,6 +41,7 @@ #define WM831X_DCDC_CONTROL_2 1 #define WM831X_DCDC_ON_CONFIG 2 #define WM831X_DCDC_SLEEP_CONTROL 3 +#define WM831X_DCDC_DVS_CONTROL 4 /* * Shared @@ -50,6 +53,10 @@ struct wm831x_dcdc { int base; struct wm831x *wm831x; struct regulator_dev *regulator; + int dvs_gpio; + int dvs_gpio_state; + int on_vsel; + int dvs_vsel; }; static int wm831x_dcdc_is_enabled(struct regulator_dev *rdev) @@ -240,11 +247,9 @@ static int wm831x_buckv_list_voltage(struct regulator_dev *rdev, return -EINVAL; } -static int wm831x_buckv_set_voltage_int(struct regulator_dev *rdev, int reg, - int min_uV, int max_uV) +static int wm831x_buckv_select_min_voltage(struct regulator_dev *rdev, + int min_uV, int max_uV) { - struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev); - struct wm831x *wm831x = dcdc->wm831x; u16 vsel; if (min_uV < 600000) @@ -257,39 +262,126 @@ static int wm831x_buckv_set_voltage_int(struct regulator_dev *rdev, int reg, if (wm831x_buckv_list_voltage(rdev, vsel) > max_uV) return -EINVAL; - return wm831x_set_bits(wm831x, reg, WM831X_DC1_ON_VSEL_MASK, vsel); + return vsel; +} + +static int wm831x_buckv_select_max_voltage(struct regulator_dev *rdev, + int min_uV, int max_uV) +{ + u16 vsel; + + if (max_uV < 600000 || max_uV > 1800000) + return -EINVAL; + + vsel = ((max_uV - 600000) / 12500) + 8; + + if (wm831x_buckv_list_voltage(rdev, vsel) < min_uV || + wm831x_buckv_list_voltage(rdev, vsel) < max_uV) + return -EINVAL; + + return vsel; +} + +static int wm831x_buckv_set_dvs(struct regulator_dev *rdev, int state) +{ + struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev); + + if (state == dcdc->dvs_gpio_state) + return 0; + + dcdc->dvs_gpio_state = state; + gpio_set_value(dcdc->dvs_gpio, state); + + /* Should wait for DVS state change to be asserted if we have + * a GPIO for it, for now assume the device is configured + * for the fastest possible transition. + */ + + return 0; } static int wm831x_buckv_set_voltage(struct regulator_dev *rdev, - int min_uV, int max_uV) + int min_uV, int max_uV) { struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev); - u16 reg = dcdc->base + WM831X_DCDC_ON_CONFIG; + struct wm831x *wm831x = dcdc->wm831x; + int on_reg = dcdc->base + WM831X_DCDC_ON_CONFIG; + int dvs_reg = dcdc->base + WM831X_DCDC_DVS_CONTROL; + int vsel, ret; + + vsel = wm831x_buckv_select_min_voltage(rdev, min_uV, max_uV); + if (vsel < 0) + return vsel; + + /* If this value is already set then do a GPIO update if we can */ + if (dcdc->dvs_gpio && dcdc->on_vsel == vsel) + return wm831x_buckv_set_dvs(rdev, 0); + + if (dcdc->dvs_gpio && dcdc->dvs_vsel == vsel) + return wm831x_buckv_set_dvs(rdev, 1); + + /* Always set the ON status to the minimum voltage */ + ret = wm831x_set_bits(wm831x, on_reg, WM831X_DC1_ON_VSEL_MASK, vsel); + if (ret < 0) + return ret; + dcdc->on_vsel = vsel; + + if (!dcdc->dvs_gpio) + return ret; + + /* Kick the voltage transition now */ + ret = wm831x_buckv_set_dvs(rdev, 0); + if (ret < 0) + return ret; + + /* Set the high voltage as the DVS voltage. This is optimised + * for CPUfreq usage, most processors will keep the maximum + * voltage constant and lower the minimum with the frequency. */ + vsel = wm831x_buckv_select_max_voltage(rdev, min_uV, max_uV); + if (vsel < 0) { + /* This should never happen - at worst the same vsel + * should be chosen */ + WARN_ON(vsel < 0); + return 0; + } + + /* Don't bother if it's the same VSEL we're already using */ + if (vsel == dcdc->on_vsel) + return 0; - return wm831x_buckv_set_voltage_int(rdev, reg, min_uV, max_uV); + ret = wm831x_set_bits(wm831x, dvs_reg, WM831X_DC1_DVS_VSEL_MASK, vsel); + if (ret == 0) + dcdc->dvs_vsel = vsel; + else + dev_warn(wm831x->dev, "Failed to set DCDC DVS VSEL: %d\n", + ret); + + return 0; } static int wm831x_buckv_set_suspend_voltage(struct regulator_dev *rdev, - int uV) + int uV) { struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev); + struct wm831x *wm831x = dcdc->wm831x; u16 reg = dcdc->base + WM831X_DCDC_SLEEP_CONTROL; + int vsel; + + vsel = wm831x_buckv_select_min_voltage(rdev, uV, uV); + if (vsel < 0) + return vsel; - return wm831x_buckv_set_voltage_int(rdev, reg, uV, uV); + return wm831x_set_bits(wm831x, reg, WM831X_DC1_SLP_VSEL_MASK, vsel); } static int wm831x_buckv_get_voltage(struct regulator_dev *rdev) { struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev); - struct wm831x *wm831x = dcdc->wm831x; - u16 reg = dcdc->base + WM831X_DCDC_ON_CONFIG; - int val; - val = wm831x_reg_read(wm831x, reg); - if (val < 0) - return val; - - return wm831x_buckv_list_voltage(rdev, val & WM831X_DC1_ON_VSEL_MASK); + if (dcdc->dvs_gpio && dcdc->dvs_gpio_state) + return wm831x_buckv_list_voltage(rdev, dcdc->dvs_vsel); + else + return wm831x_buckv_list_voltage(rdev, dcdc->on_vsel); } /* Current limit options */ @@ -346,6 +438,64 @@ static struct regulator_ops wm831x_buckv_ops = { .set_suspend_mode = wm831x_dcdc_set_suspend_mode, }; +/* + * Set up DVS control. We just log errors since we can still run + * (with reduced performance) if we fail. + */ +static __devinit void wm831x_buckv_dvs_init(struct wm831x_dcdc *dcdc, + struct wm831x_buckv_pdata *pdata) +{ + struct wm831x *wm831x = dcdc->wm831x; + int ret; + u16 ctrl; + + if (!pdata || !pdata->dvs_gpio) + return; + + switch (pdata->dvs_control_src) { + case 1: + ctrl = 2 << WM831X_DC1_DVS_SRC_SHIFT; + break; + case 2: + ctrl = 3 << WM831X_DC1_DVS_SRC_SHIFT; + break; + default: + dev_err(wm831x->dev, "Invalid DVS control source %d for %s\n", + pdata->dvs_control_src, dcdc->name); + return; + } + + ret = wm831x_set_bits(wm831x, dcdc->base + WM831X_DCDC_DVS_CONTROL, + WM831X_DC1_DVS_SRC_MASK, ctrl); + if (ret < 0) { + dev_err(wm831x->dev, "Failed to set %s DVS source: %d\n", + dcdc->name, ret); + return; + } + + ret = gpio_request(pdata->dvs_gpio, "DCDC DVS"); + if (ret < 0) { + dev_err(wm831x->dev, "Failed to get %s DVS GPIO: %d\n", + dcdc->name, ret); + return; + } + + /* gpiolib won't let us read the GPIO status so pick the higher + * of the two existing voltages so we take it as platform data. + */ + dcdc->dvs_gpio_state = pdata->dvs_init_state; + + ret = gpio_direction_output(pdata->dvs_gpio, dcdc->dvs_gpio_state); + if (ret < 0) { + dev_err(wm831x->dev, "Failed to enable %s DVS GPIO: %d\n", + dcdc->name, ret); + gpio_free(pdata->dvs_gpio); + return; + } + + dcdc->dvs_gpio = pdata->dvs_gpio; +} + static __devinit int wm831x_buckv_probe(struct platform_device *pdev) { struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent); @@ -384,6 +534,23 @@ static __devinit int wm831x_buckv_probe(struct platform_device *pdev) dcdc->desc.ops = &wm831x_buckv_ops; dcdc->desc.owner = THIS_MODULE; + ret = wm831x_reg_read(wm831x, dcdc->base + WM831X_DCDC_ON_CONFIG); + if (ret < 0) { + dev_err(wm831x->dev, "Failed to read ON VSEL: %d\n", ret); + goto err; + } + dcdc->on_vsel = ret & WM831X_DC1_ON_VSEL_MASK; + + ret = wm831x_reg_read(wm831x, dcdc->base + WM831X_DCDC_ON_CONFIG); + if (ret < 0) { + dev_err(wm831x->dev, "Failed to read DVS VSEL: %d\n", ret); + goto err; + } + dcdc->dvs_vsel = ret & WM831X_DC1_DVS_VSEL_MASK; + + if (pdata->dcdc[id]) + wm831x_buckv_dvs_init(dcdc, pdata->dcdc[id]->driver_data); + dcdc->regulator = regulator_register(&dcdc->desc, &pdev->dev, pdata->dcdc[id], dcdc); if (IS_ERR(dcdc->regulator)) { @@ -422,6 +589,8 @@ err_uv: err_regulator: regulator_unregister(dcdc->regulator); err: + if (dcdc->dvs_gpio) + gpio_free(dcdc->dvs_gpio); kfree(dcdc); return ret; } @@ -434,6 +603,8 @@ static __devexit int wm831x_buckv_remove(struct platform_device *pdev) wm831x_free_irq(wm831x, platform_get_irq_byname(pdev, "HC"), dcdc); wm831x_free_irq(wm831x, platform_get_irq_byname(pdev, "UV"), dcdc); regulator_unregister(dcdc->regulator); + if (dcdc->dvs_gpio) + gpio_free(dcdc->dvs_gpio); kfree(dcdc); return 0; diff --git a/drivers/regulator/wm831x-ldo.c b/drivers/regulator/wm831x-ldo.c index 902db56ce099..61e02ac2fda3 100644 --- a/drivers/regulator/wm831x-ldo.c +++ b/drivers/regulator/wm831x-ldo.c @@ -470,7 +470,7 @@ static unsigned int wm831x_aldo_get_mode(struct regulator_dev *rdev) struct wm831x_ldo *ldo = rdev_get_drvdata(rdev); struct wm831x *wm831x = ldo->wm831x; int on_reg = ldo->base + WM831X_LDO_ON_CONTROL; - unsigned int ret; + int ret; ret = wm831x_reg_read(wm831x, on_reg); if (ret < 0) diff --git a/drivers/rtc/rtc-ds1305.c b/drivers/rtc/rtc-ds1305.c index 259db7f3535b..9630e7d3314e 100644 --- a/drivers/rtc/rtc-ds1305.c +++ b/drivers/rtc/rtc-ds1305.c @@ -778,6 +778,8 @@ static int __devinit ds1305_probe(struct spi_device *spi) spi->irq, status); goto fail1; } + + device_set_wakeup_capable(&spi->dev, 1); } /* export NVRAM */ diff --git a/drivers/rtc/rtc-ds1307.c b/drivers/rtc/rtc-ds1307.c index 8a99da6f2f24..c4ec5c158aa1 100644 --- a/drivers/rtc/rtc-ds1307.c +++ b/drivers/rtc/rtc-ds1307.c @@ -881,6 +881,8 @@ read_rtc: "unable to request IRQ!\n"); goto exit_irq; } + + device_set_wakeup_capable(&client->dev, 1); set_bit(HAS_ALARM, &ds1307->flags); dev_dbg(&client->dev, "got IRQ %d\n", client->irq); } diff --git a/drivers/rtc/rtc-ds1374.c b/drivers/rtc/rtc-ds1374.c index 713f7bf5afb3..5317bbcbc7a0 100644 --- a/drivers/rtc/rtc-ds1374.c +++ b/drivers/rtc/rtc-ds1374.c @@ -383,6 +383,8 @@ static int ds1374_probe(struct i2c_client *client, dev_err(&client->dev, "unable to request IRQ\n"); goto out_free; } + + device_set_wakeup_capable(&client->dev, 1); } ds1374->rtc = rtc_device_register(client->name, &client->dev, diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 2d9d70359360..f55eb0107336 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -216,6 +216,17 @@ config SPI_S3C24XX help SPI driver for Samsung S3C24XX series ARM SoCs +config SPI_S3C24XX_FIQ + bool "S3C24XX driver with FIQ pseudo-DMA" + depends on SPI_S3C24XX + select FIQ + help + Enable FIQ support for the S3C24XX SPI driver to provide pseudo + DMA by using the fast-interrupt request framework, This allows + the driver to get DMA-like performance when there are either + no free DMA channels, or when doing transfers that required both + TX and RX data paths. + config SPI_S3C24XX_GPIO tristate "Samsung S3C24XX series SPI by GPIO" depends on ARCH_S3C2410 && EXPERIMENTAL @@ -226,6 +237,13 @@ config SPI_S3C24XX_GPIO the inbuilt hardware cannot provide the transfer mode, or where the board is using non hardware connected pins. +config SPI_S3C64XX + tristate "Samsung S3C64XX series type SPI" + depends on ARCH_S3C64XX && EXPERIMENTAL + select S3C64XX_DMA + help + SPI driver for Samsung S3C64XX and newer SoCs. + config SPI_SH_MSIOF tristate "SuperH MSIOF SPI controller" depends on SUPERH && HAVE_CLK @@ -289,6 +307,16 @@ config SPI_NUC900 # Add new SPI master controllers in alphabetical order above this line # +config SPI_DESIGNWARE + bool "DesignWare SPI controller core support" + depends on SPI_MASTER + help + general driver for SPI controller core from DesignWare + +config SPI_DW_PCI + tristate "PCI interface driver for DW SPI core" + depends on SPI_DESIGNWARE && PCI + # # There are lots of SPI device types, with sensors and memory # being probably the most widely used ones. diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index ed8c1675b52f..f3d2810ba11c 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -16,6 +16,8 @@ obj-$(CONFIG_SPI_BFIN) += spi_bfin5xx.o obj-$(CONFIG_SPI_BITBANG) += spi_bitbang.o obj-$(CONFIG_SPI_AU1550) += au1550_spi.o obj-$(CONFIG_SPI_BUTTERFLY) += spi_butterfly.o +obj-$(CONFIG_SPI_DESIGNWARE) += dw_spi.o +obj-$(CONFIG_SPI_DW_PCI) += dw_spi_pci.o obj-$(CONFIG_SPI_GPIO) += spi_gpio.o obj-$(CONFIG_SPI_IMX) += spi_imx.o obj-$(CONFIG_SPI_LM70_LLP) += spi_lm70llp.o @@ -30,7 +32,8 @@ obj-$(CONFIG_SPI_MPC52xx) += mpc52xx_spi.o obj-$(CONFIG_SPI_MPC8xxx) += spi_mpc8xxx.o obj-$(CONFIG_SPI_PPC4xx) += spi_ppc4xx.o obj-$(CONFIG_SPI_S3C24XX_GPIO) += spi_s3c24xx_gpio.o -obj-$(CONFIG_SPI_S3C24XX) += spi_s3c24xx.o +obj-$(CONFIG_SPI_S3C24XX) += spi_s3c24xx_hw.o +obj-$(CONFIG_SPI_S3C64XX) += spi_s3c64xx.o obj-$(CONFIG_SPI_TXX9) += spi_txx9.o obj-$(CONFIG_SPI_XILINX) += xilinx_spi.o obj-$(CONFIG_SPI_XILINX_OF) += xilinx_spi_of.o @@ -39,6 +42,11 @@ obj-$(CONFIG_SPI_SH_SCI) += spi_sh_sci.o obj-$(CONFIG_SPI_SH_MSIOF) += spi_sh_msiof.o obj-$(CONFIG_SPI_STMP3XXX) += spi_stmp.o obj-$(CONFIG_SPI_NUC900) += spi_nuc900.o + +# special build for s3c24xx spi driver with fiq support +spi_s3c24xx_hw-y := spi_s3c24xx.o +spi_s3c24xx_hw-$(CONFIG_SPI_S3C24XX_FIQ) += spi_s3c24xx_fiq.o + # ... add above this line ... # SPI protocol drivers (device/link on bus) diff --git a/drivers/spi/atmel_spi.c b/drivers/spi/atmel_spi.c index f5b3fdbb1e27..d21c24eaf0a9 100644 --- a/drivers/spi/atmel_spi.c +++ b/drivers/spi/atmel_spi.c @@ -189,14 +189,14 @@ static void atmel_spi_next_xfer_data(struct spi_master *master, /* use scratch buffer only when rx or tx data is unspecified */ if (xfer->rx_buf) - *rx_dma = xfer->rx_dma + xfer->len - len; + *rx_dma = xfer->rx_dma + xfer->len - *plen; else { *rx_dma = as->buffer_dma; if (len > BUFFER_SIZE) len = BUFFER_SIZE; } if (xfer->tx_buf) - *tx_dma = xfer->tx_dma + xfer->len - len; + *tx_dma = xfer->tx_dma + xfer->len - *plen; else { *tx_dma = as->buffer_dma; if (len > BUFFER_SIZE) @@ -788,7 +788,7 @@ static int __init atmel_spi_probe(struct platform_device *pdev) spin_lock_init(&as->lock); INIT_LIST_HEAD(&as->queue); as->pdev = pdev; - as->regs = ioremap(regs->start, (regs->end - regs->start) + 1); + as->regs = ioremap(regs->start, resource_size(regs)); if (!as->regs) goto out_free_buffer; as->irq = irq; diff --git a/drivers/spi/dw_spi.c b/drivers/spi/dw_spi.c new file mode 100644 index 000000000000..31620fae77be --- /dev/null +++ b/drivers/spi/dw_spi.c @@ -0,0 +1,944 @@ +/* + * dw_spi.c - Designware SPI core controller driver (refer pxa2xx_spi.c) + * + * Copyright (c) 2009, Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#include <linux/dma-mapping.h> +#include <linux/interrupt.h> +#include <linux/highmem.h> +#include <linux/delay.h> + +#include <linux/spi/dw_spi.h> +#include <linux/spi/spi.h> + +#ifdef CONFIG_DEBUG_FS +#include <linux/debugfs.h> +#endif + +#define START_STATE ((void *)0) +#define RUNNING_STATE ((void *)1) +#define DONE_STATE ((void *)2) +#define ERROR_STATE ((void *)-1) + +#define QUEUE_RUNNING 0 +#define QUEUE_STOPPED 1 + +#define MRST_SPI_DEASSERT 0 +#define MRST_SPI_ASSERT 1 + +/* Slave spi_dev related */ +struct chip_data { + u16 cr0; + u8 cs; /* chip select pin */ + u8 n_bytes; /* current is a 1/2/4 byte op */ + u8 tmode; /* TR/TO/RO/EEPROM */ + u8 type; /* SPI/SSP/MicroWire */ + + u8 poll_mode; /* 1 means use poll mode */ + + u32 dma_width; + u32 rx_threshold; + u32 tx_threshold; + u8 enable_dma; + u8 bits_per_word; + u16 clk_div; /* baud rate divider */ + u32 speed_hz; /* baud rate */ + int (*write)(struct dw_spi *dws); + int (*read)(struct dw_spi *dws); + void (*cs_control)(u32 command); +}; + +#ifdef CONFIG_DEBUG_FS +static int spi_show_regs_open(struct inode *inode, struct file *file) +{ + file->private_data = inode->i_private; + return 0; +} + +#define SPI_REGS_BUFSIZE 1024 +static ssize_t spi_show_regs(struct file *file, char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct dw_spi *dws; + char *buf; + u32 len = 0; + ssize_t ret; + + dws = file->private_data; + + buf = kzalloc(SPI_REGS_BUFSIZE, GFP_KERNEL); + if (!buf) + return 0; + + len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, + "MRST SPI0 registers:\n"); + len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, + "=================================\n"); + len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, + "CTRL0: \t\t0x%08x\n", dw_readl(dws, ctrl0)); + len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, + "CTRL1: \t\t0x%08x\n", dw_readl(dws, ctrl1)); + len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, + "SSIENR: \t0x%08x\n", dw_readl(dws, ssienr)); + len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, + "SER: \t\t0x%08x\n", dw_readl(dws, ser)); + len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, + "BAUDR: \t\t0x%08x\n", dw_readl(dws, baudr)); + len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, + "TXFTLR: \t0x%08x\n", dw_readl(dws, txfltr)); + len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, + "RXFTLR: \t0x%08x\n", dw_readl(dws, rxfltr)); + len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, + "TXFLR: \t\t0x%08x\n", dw_readl(dws, txflr)); + len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, + "RXFLR: \t\t0x%08x\n", dw_readl(dws, rxflr)); + len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, + "SR: \t\t0x%08x\n", dw_readl(dws, sr)); + len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, + "IMR: \t\t0x%08x\n", dw_readl(dws, imr)); + len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, + "ISR: \t\t0x%08x\n", dw_readl(dws, isr)); + len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, + "DMACR: \t\t0x%08x\n", dw_readl(dws, dmacr)); + len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, + "DMATDLR: \t0x%08x\n", dw_readl(dws, dmatdlr)); + len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, + "DMARDLR: \t0x%08x\n", dw_readl(dws, dmardlr)); + len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, + "=================================\n"); + + ret = simple_read_from_buffer(user_buf, count, ppos, buf, len); + kfree(buf); + return ret; +} + +static const struct file_operations mrst_spi_regs_ops = { + .owner = THIS_MODULE, + .open = spi_show_regs_open, + .read = spi_show_regs, +}; + +static int mrst_spi_debugfs_init(struct dw_spi *dws) +{ + dws->debugfs = debugfs_create_dir("mrst_spi", NULL); + if (!dws->debugfs) + return -ENOMEM; + + debugfs_create_file("registers", S_IFREG | S_IRUGO, + dws->debugfs, (void *)dws, &mrst_spi_regs_ops); + return 0; +} + +static void mrst_spi_debugfs_remove(struct dw_spi *dws) +{ + if (dws->debugfs) + debugfs_remove_recursive(dws->debugfs); +} + +#else +static inline int mrst_spi_debugfs_init(struct dw_spi *dws) +{ +} + +static inline void mrst_spi_debugfs_remove(struct dw_spi *dws) +{ +} +#endif /* CONFIG_DEBUG_FS */ + +static void wait_till_not_busy(struct dw_spi *dws) +{ + unsigned long end = jiffies + usecs_to_jiffies(1000); + + while (time_before(jiffies, end)) { + if (!(dw_readw(dws, sr) & SR_BUSY)) + return; + } + dev_err(&dws->master->dev, + "DW SPI: Stutus keeps busy for 1000us after a read/write!\n"); +} + +static void flush(struct dw_spi *dws) +{ + while (dw_readw(dws, sr) & SR_RF_NOT_EMPT) + dw_readw(dws, dr); + + wait_till_not_busy(dws); +} + +static void null_cs_control(u32 command) +{ +} + +static int null_writer(struct dw_spi *dws) +{ + u8 n_bytes = dws->n_bytes; + + if (!(dw_readw(dws, sr) & SR_TF_NOT_FULL) + || (dws->tx == dws->tx_end)) + return 0; + dw_writew(dws, dr, 0); + dws->tx += n_bytes; + + wait_till_not_busy(dws); + return 1; +} + +static int null_reader(struct dw_spi *dws) +{ + u8 n_bytes = dws->n_bytes; + + while ((dw_readw(dws, sr) & SR_RF_NOT_EMPT) + && (dws->rx < dws->rx_end)) { + dw_readw(dws, dr); + dws->rx += n_bytes; + } + wait_till_not_busy(dws); + return dws->rx == dws->rx_end; +} + +static int u8_writer(struct dw_spi *dws) +{ + if (!(dw_readw(dws, sr) & SR_TF_NOT_FULL) + || (dws->tx == dws->tx_end)) + return 0; + + dw_writew(dws, dr, *(u8 *)(dws->tx)); + ++dws->tx; + + wait_till_not_busy(dws); + return 1; +} + +static int u8_reader(struct dw_spi *dws) +{ + while ((dw_readw(dws, sr) & SR_RF_NOT_EMPT) + && (dws->rx < dws->rx_end)) { + *(u8 *)(dws->rx) = dw_readw(dws, dr); + ++dws->rx; + } + + wait_till_not_busy(dws); + return dws->rx == dws->rx_end; +} + +static int u16_writer(struct dw_spi *dws) +{ + if (!(dw_readw(dws, sr) & SR_TF_NOT_FULL) + || (dws->tx == dws->tx_end)) + return 0; + + dw_writew(dws, dr, *(u16 *)(dws->tx)); + dws->tx += 2; + + wait_till_not_busy(dws); + return 1; +} + +static int u16_reader(struct dw_spi *dws) +{ + u16 temp; + + while ((dw_readw(dws, sr) & SR_RF_NOT_EMPT) + && (dws->rx < dws->rx_end)) { + temp = dw_readw(dws, dr); + *(u16 *)(dws->rx) = temp; + dws->rx += 2; + } + + wait_till_not_busy(dws); + return dws->rx == dws->rx_end; +} + +static void *next_transfer(struct dw_spi *dws) +{ + struct spi_message *msg = dws->cur_msg; + struct spi_transfer *trans = dws->cur_transfer; + + /* Move to next transfer */ + if (trans->transfer_list.next != &msg->transfers) { + dws->cur_transfer = + list_entry(trans->transfer_list.next, + struct spi_transfer, + transfer_list); + return RUNNING_STATE; + } else + return DONE_STATE; +} + +/* + * Note: first step is the protocol driver prepares + * a dma-capable memory, and this func just need translate + * the virt addr to physical + */ +static int map_dma_buffers(struct dw_spi *dws) +{ + if (!dws->cur_msg->is_dma_mapped || !dws->dma_inited + || !dws->cur_chip->enable_dma) + return 0; + + if (dws->cur_transfer->tx_dma) + dws->tx_dma = dws->cur_transfer->tx_dma; + + if (dws->cur_transfer->rx_dma) + dws->rx_dma = dws->cur_transfer->rx_dma; + + return 1; +} + +/* Caller already set message->status; dma and pio irqs are blocked */ +static void giveback(struct dw_spi *dws) +{ + struct spi_transfer *last_transfer; + unsigned long flags; + struct spi_message *msg; + + spin_lock_irqsave(&dws->lock, flags); + msg = dws->cur_msg; + dws->cur_msg = NULL; + dws->cur_transfer = NULL; + dws->prev_chip = dws->cur_chip; + dws->cur_chip = NULL; + dws->dma_mapped = 0; + queue_work(dws->workqueue, &dws->pump_messages); + spin_unlock_irqrestore(&dws->lock, flags); + + last_transfer = list_entry(msg->transfers.prev, + struct spi_transfer, + transfer_list); + + if (!last_transfer->cs_change) + dws->cs_control(MRST_SPI_DEASSERT); + + msg->state = NULL; + if (msg->complete) + msg->complete(msg->context); +} + +static void int_error_stop(struct dw_spi *dws, const char *msg) +{ + /* Stop and reset hw */ + flush(dws); + spi_enable_chip(dws, 0); + + dev_err(&dws->master->dev, "%s\n", msg); + dws->cur_msg->state = ERROR_STATE; + tasklet_schedule(&dws->pump_transfers); +} + +static void transfer_complete(struct dw_spi *dws) +{ + /* Update total byte transfered return count actual bytes read */ + dws->cur_msg->actual_length += dws->len; + + /* Move to next transfer */ + dws->cur_msg->state = next_transfer(dws); + + /* Handle end of message */ + if (dws->cur_msg->state == DONE_STATE) { + dws->cur_msg->status = 0; + giveback(dws); + } else + tasklet_schedule(&dws->pump_transfers); +} + +static irqreturn_t interrupt_transfer(struct dw_spi *dws) +{ + u16 irq_status, irq_mask = 0x3f; + + irq_status = dw_readw(dws, isr) & irq_mask; + /* Error handling */ + if (irq_status & (SPI_INT_TXOI | SPI_INT_RXOI | SPI_INT_RXUI)) { + dw_readw(dws, txoicr); + dw_readw(dws, rxoicr); + dw_readw(dws, rxuicr); + int_error_stop(dws, "interrupt_transfer: fifo overrun"); + return IRQ_HANDLED; + } + + /* INT comes from tx */ + if (dws->tx && (irq_status & SPI_INT_TXEI)) { + while (dws->tx < dws->tx_end) + dws->write(dws); + + if (dws->tx == dws->tx_end) { + spi_mask_intr(dws, SPI_INT_TXEI); + transfer_complete(dws); + } + } + + /* INT comes from rx */ + if (dws->rx && (irq_status & SPI_INT_RXFI)) { + if (dws->read(dws)) + transfer_complete(dws); + } + return IRQ_HANDLED; +} + +static irqreturn_t dw_spi_irq(int irq, void *dev_id) +{ + struct dw_spi *dws = dev_id; + + if (!dws->cur_msg) { + spi_mask_intr(dws, SPI_INT_TXEI); + /* Never fail */ + return IRQ_HANDLED; + } + + return dws->transfer_handler(dws); +} + +/* Must be called inside pump_transfers() */ +static void poll_transfer(struct dw_spi *dws) +{ + if (dws->tx) { + while (dws->write(dws)) + dws->read(dws); + } + + dws->read(dws); + transfer_complete(dws); +} + +static void dma_transfer(struct dw_spi *dws, int cs_change) +{ +} + +static void pump_transfers(unsigned long data) +{ + struct dw_spi *dws = (struct dw_spi *)data; + struct spi_message *message = NULL; + struct spi_transfer *transfer = NULL; + struct spi_transfer *previous = NULL; + struct spi_device *spi = NULL; + struct chip_data *chip = NULL; + u8 bits = 0; + u8 imask = 0; + u8 cs_change = 0; + u16 clk_div = 0; + u32 speed = 0; + u32 cr0 = 0; + + /* Get current state information */ + message = dws->cur_msg; + transfer = dws->cur_transfer; + chip = dws->cur_chip; + spi = message->spi; + + if (message->state == ERROR_STATE) { + message->status = -EIO; + goto early_exit; + } + + /* Handle end of message */ + if (message->state == DONE_STATE) { + message->status = 0; + goto early_exit; + } + + /* Delay if requested at end of transfer*/ + if (message->state == RUNNING_STATE) { + previous = list_entry(transfer->transfer_list.prev, + struct spi_transfer, + transfer_list); + if (previous->delay_usecs) + udelay(previous->delay_usecs); + } + + dws->n_bytes = chip->n_bytes; + dws->dma_width = chip->dma_width; + dws->cs_control = chip->cs_control; + + dws->rx_dma = transfer->rx_dma; + dws->tx_dma = transfer->tx_dma; + dws->tx = (void *)transfer->tx_buf; + dws->tx_end = dws->tx + transfer->len; + dws->rx = transfer->rx_buf; + dws->rx_end = dws->rx + transfer->len; + dws->write = dws->tx ? chip->write : null_writer; + dws->read = dws->rx ? chip->read : null_reader; + dws->cs_change = transfer->cs_change; + dws->len = dws->cur_transfer->len; + if (chip != dws->prev_chip) + cs_change = 1; + + cr0 = chip->cr0; + + /* Handle per transfer options for bpw and speed */ + if (transfer->speed_hz) { + speed = chip->speed_hz; + + if (transfer->speed_hz != speed) { + speed = transfer->speed_hz; + if (speed > dws->max_freq) { + printk(KERN_ERR "MRST SPI0: unsupported" + "freq: %dHz\n", speed); + message->status = -EIO; + goto early_exit; + } + + /* clk_div doesn't support odd number */ + clk_div = dws->max_freq / speed; + clk_div = (clk_div >> 1) << 1; + + chip->speed_hz = speed; + chip->clk_div = clk_div; + } + } + if (transfer->bits_per_word) { + bits = transfer->bits_per_word; + + switch (bits) { + case 8: + dws->n_bytes = 1; + dws->dma_width = 1; + dws->read = (dws->read != null_reader) ? + u8_reader : null_reader; + dws->write = (dws->write != null_writer) ? + u8_writer : null_writer; + break; + case 16: + dws->n_bytes = 2; + dws->dma_width = 2; + dws->read = (dws->read != null_reader) ? + u16_reader : null_reader; + dws->write = (dws->write != null_writer) ? + u16_writer : null_writer; + break; + default: + printk(KERN_ERR "MRST SPI0: unsupported bits:" + "%db\n", bits); + message->status = -EIO; + goto early_exit; + } + + cr0 = (bits - 1) + | (chip->type << SPI_FRF_OFFSET) + | (spi->mode << SPI_MODE_OFFSET) + | (chip->tmode << SPI_TMOD_OFFSET); + } + message->state = RUNNING_STATE; + + /* Check if current transfer is a DMA transaction */ + dws->dma_mapped = map_dma_buffers(dws); + + if (!dws->dma_mapped && !chip->poll_mode) { + if (dws->rx) + imask |= SPI_INT_RXFI; + if (dws->tx) + imask |= SPI_INT_TXEI; + dws->transfer_handler = interrupt_transfer; + } + + /* + * Reprogram registers only if + * 1. chip select changes + * 2. clk_div is changed + * 3. control value changes + */ + if (dw_readw(dws, ctrl0) != cr0 || cs_change || clk_div) { + spi_enable_chip(dws, 0); + + if (dw_readw(dws, ctrl0) != cr0) + dw_writew(dws, ctrl0, cr0); + + /* Set the interrupt mask, for poll mode just diable all int */ + spi_mask_intr(dws, 0xff); + if (!chip->poll_mode) + spi_umask_intr(dws, imask); + + spi_set_clk(dws, clk_div ? clk_div : chip->clk_div); + spi_chip_sel(dws, spi->chip_select); + spi_enable_chip(dws, 1); + + if (cs_change) + dws->prev_chip = chip; + } + + if (dws->dma_mapped) + dma_transfer(dws, cs_change); + + if (chip->poll_mode) + poll_transfer(dws); + + return; + +early_exit: + giveback(dws); + return; +} + +static void pump_messages(struct work_struct *work) +{ + struct dw_spi *dws = + container_of(work, struct dw_spi, pump_messages); + unsigned long flags; + + /* Lock queue and check for queue work */ + spin_lock_irqsave(&dws->lock, flags); + if (list_empty(&dws->queue) || dws->run == QUEUE_STOPPED) { + dws->busy = 0; + spin_unlock_irqrestore(&dws->lock, flags); + return; + } + + /* Make sure we are not already running a message */ + if (dws->cur_msg) { + spin_unlock_irqrestore(&dws->lock, flags); + return; + } + + /* Extract head of queue */ + dws->cur_msg = list_entry(dws->queue.next, struct spi_message, queue); + list_del_init(&dws->cur_msg->queue); + + /* Initial message state*/ + dws->cur_msg->state = START_STATE; + dws->cur_transfer = list_entry(dws->cur_msg->transfers.next, + struct spi_transfer, + transfer_list); + dws->cur_chip = spi_get_ctldata(dws->cur_msg->spi); + + /* Mark as busy and launch transfers */ + tasklet_schedule(&dws->pump_transfers); + + dws->busy = 1; + spin_unlock_irqrestore(&dws->lock, flags); +} + +/* spi_device use this to queue in their spi_msg */ +static int dw_spi_transfer(struct spi_device *spi, struct spi_message *msg) +{ + struct dw_spi *dws = spi_master_get_devdata(spi->master); + unsigned long flags; + + spin_lock_irqsave(&dws->lock, flags); + + if (dws->run == QUEUE_STOPPED) { + spin_unlock_irqrestore(&dws->lock, flags); + return -ESHUTDOWN; + } + + msg->actual_length = 0; + msg->status = -EINPROGRESS; + msg->state = START_STATE; + + list_add_tail(&msg->queue, &dws->queue); + + if (dws->run == QUEUE_RUNNING && !dws->busy) { + + if (dws->cur_transfer || dws->cur_msg) + queue_work(dws->workqueue, + &dws->pump_messages); + else { + /* If no other data transaction in air, just go */ + spin_unlock_irqrestore(&dws->lock, flags); + pump_messages(&dws->pump_messages); + return 0; + } + } + + spin_unlock_irqrestore(&dws->lock, flags); + return 0; +} + +/* This may be called twice for each spi dev */ +static int dw_spi_setup(struct spi_device *spi) +{ + struct dw_spi_chip *chip_info = NULL; + struct chip_data *chip; + + if (spi->bits_per_word != 8 && spi->bits_per_word != 16) + return -EINVAL; + + /* Only alloc on first setup */ + chip = spi_get_ctldata(spi); + if (!chip) { + chip = kzalloc(sizeof(struct chip_data), GFP_KERNEL); + if (!chip) + return -ENOMEM; + + chip->cs_control = null_cs_control; + chip->enable_dma = 0; + } + + /* + * Protocol drivers may change the chip settings, so... + * if chip_info exists, use it + */ + chip_info = spi->controller_data; + + /* chip_info doesn't always exist */ + if (chip_info) { + if (chip_info->cs_control) + chip->cs_control = chip_info->cs_control; + + chip->poll_mode = chip_info->poll_mode; + chip->type = chip_info->type; + + chip->rx_threshold = 0; + chip->tx_threshold = 0; + + chip->enable_dma = chip_info->enable_dma; + } + + if (spi->bits_per_word <= 8) { + chip->n_bytes = 1; + chip->dma_width = 1; + chip->read = u8_reader; + chip->write = u8_writer; + } else if (spi->bits_per_word <= 16) { + chip->n_bytes = 2; + chip->dma_width = 2; + chip->read = u16_reader; + chip->write = u16_writer; + } else { + /* Never take >16b case for MRST SPIC */ + dev_err(&spi->dev, "invalid wordsize\n"); + return -EINVAL; + } + chip->bits_per_word = spi->bits_per_word; + + chip->speed_hz = spi->max_speed_hz; + if (chip->speed_hz) + chip->clk_div = 25000000 / chip->speed_hz; + else + chip->clk_div = 8; /* default value */ + + chip->tmode = 0; /* Tx & Rx */ + /* Default SPI mode is SCPOL = 0, SCPH = 0 */ + chip->cr0 = (chip->bits_per_word - 1) + | (chip->type << SPI_FRF_OFFSET) + | (spi->mode << SPI_MODE_OFFSET) + | (chip->tmode << SPI_TMOD_OFFSET); + + spi_set_ctldata(spi, chip); + return 0; +} + +static void dw_spi_cleanup(struct spi_device *spi) +{ + struct chip_data *chip = spi_get_ctldata(spi); + kfree(chip); +} + +static int __init init_queue(struct dw_spi *dws) +{ + INIT_LIST_HEAD(&dws->queue); + spin_lock_init(&dws->lock); + + dws->run = QUEUE_STOPPED; + dws->busy = 0; + + tasklet_init(&dws->pump_transfers, + pump_transfers, (unsigned long)dws); + + INIT_WORK(&dws->pump_messages, pump_messages); + dws->workqueue = create_singlethread_workqueue( + dev_name(dws->master->dev.parent)); + if (dws->workqueue == NULL) + return -EBUSY; + + return 0; +} + +static int start_queue(struct dw_spi *dws) +{ + unsigned long flags; + + spin_lock_irqsave(&dws->lock, flags); + + if (dws->run == QUEUE_RUNNING || dws->busy) { + spin_unlock_irqrestore(&dws->lock, flags); + return -EBUSY; + } + + dws->run = QUEUE_RUNNING; + dws->cur_msg = NULL; + dws->cur_transfer = NULL; + dws->cur_chip = NULL; + dws->prev_chip = NULL; + spin_unlock_irqrestore(&dws->lock, flags); + + queue_work(dws->workqueue, &dws->pump_messages); + + return 0; +} + +static int stop_queue(struct dw_spi *dws) +{ + unsigned long flags; + unsigned limit = 50; + int status = 0; + + spin_lock_irqsave(&dws->lock, flags); + dws->run = QUEUE_STOPPED; + while (!list_empty(&dws->queue) && dws->busy && limit--) { + spin_unlock_irqrestore(&dws->lock, flags); + msleep(10); + spin_lock_irqsave(&dws->lock, flags); + } + + if (!list_empty(&dws->queue) || dws->busy) + status = -EBUSY; + spin_unlock_irqrestore(&dws->lock, flags); + + return status; +} + +static int destroy_queue(struct dw_spi *dws) +{ + int status; + + status = stop_queue(dws); + if (status != 0) + return status; + destroy_workqueue(dws->workqueue); + return 0; +} + +/* Restart the controller, disable all interrupts, clean rx fifo */ +static void spi_hw_init(struct dw_spi *dws) +{ + spi_enable_chip(dws, 0); + spi_mask_intr(dws, 0xff); + spi_enable_chip(dws, 1); + flush(dws); +} + +int __devinit dw_spi_add_host(struct dw_spi *dws) +{ + struct spi_master *master; + int ret; + + BUG_ON(dws == NULL); + + master = spi_alloc_master(dws->parent_dev, 0); + if (!master) { + ret = -ENOMEM; + goto exit; + } + + dws->master = master; + dws->type = SSI_MOTO_SPI; + dws->prev_chip = NULL; + dws->dma_inited = 0; + dws->dma_addr = (dma_addr_t)(dws->paddr + 0x60); + + ret = request_irq(dws->irq, dw_spi_irq, 0, + "dw_spi", dws); + if (ret < 0) { + dev_err(&master->dev, "can not get IRQ\n"); + goto err_free_master; + } + + master->mode_bits = SPI_CPOL | SPI_CPHA; + master->bus_num = dws->bus_num; + master->num_chipselect = dws->num_cs; + master->cleanup = dw_spi_cleanup; + master->setup = dw_spi_setup; + master->transfer = dw_spi_transfer; + + dws->dma_inited = 0; + + /* Basic HW init */ + spi_hw_init(dws); + + /* Initial and start queue */ + ret = init_queue(dws); + if (ret) { + dev_err(&master->dev, "problem initializing queue\n"); + goto err_diable_hw; + } + ret = start_queue(dws); + if (ret) { + dev_err(&master->dev, "problem starting queue\n"); + goto err_diable_hw; + } + + spi_master_set_devdata(master, dws); + ret = spi_register_master(master); + if (ret) { + dev_err(&master->dev, "problem registering spi master\n"); + goto err_queue_alloc; + } + + mrst_spi_debugfs_init(dws); + return 0; + +err_queue_alloc: + destroy_queue(dws); +err_diable_hw: + spi_enable_chip(dws, 0); + free_irq(dws->irq, dws); +err_free_master: + spi_master_put(master); +exit: + return ret; +} +EXPORT_SYMBOL(dw_spi_add_host); + +void __devexit dw_spi_remove_host(struct dw_spi *dws) +{ + int status = 0; + + if (!dws) + return; + mrst_spi_debugfs_remove(dws); + + /* Remove the queue */ + status = destroy_queue(dws); + if (status != 0) + dev_err(&dws->master->dev, "dw_spi_remove: workqueue will not " + "complete, message memory not freed\n"); + + spi_enable_chip(dws, 0); + /* Disable clk */ + spi_set_clk(dws, 0); + free_irq(dws->irq, dws); + + /* Disconnect from the SPI framework */ + spi_unregister_master(dws->master); +} + +int dw_spi_suspend_host(struct dw_spi *dws) +{ + int ret = 0; + + ret = stop_queue(dws); + if (ret) + return ret; + spi_enable_chip(dws, 0); + spi_set_clk(dws, 0); + return ret; +} +EXPORT_SYMBOL(dw_spi_suspend_host); + +int dw_spi_resume_host(struct dw_spi *dws) +{ + int ret; + + spi_hw_init(dws); + ret = start_queue(dws); + if (ret) + dev_err(&dws->master->dev, "fail to start queue (%d)\n", ret); + return ret; +} +EXPORT_SYMBOL(dw_spi_resume_host); + +MODULE_AUTHOR("Feng Tang <feng.tang@intel.com>"); +MODULE_DESCRIPTION("Driver for DesignWare SPI controller core"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/spi/dw_spi_pci.c b/drivers/spi/dw_spi_pci.c new file mode 100644 index 000000000000..34ba69161734 --- /dev/null +++ b/drivers/spi/dw_spi_pci.c @@ -0,0 +1,169 @@ +/* + * mrst_spi_pci.c - PCI interface driver for DW SPI Core + * + * Copyright (c) 2009, Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, + * Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#include <linux/interrupt.h> +#include <linux/pci.h> +#include <linux/spi/dw_spi.h> +#include <linux/spi/spi.h> + +#define DRIVER_NAME "dw_spi_pci" + +struct dw_spi_pci { + struct pci_dev *pdev; + struct dw_spi dws; +}; + +static int __devinit spi_pci_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct dw_spi_pci *dwpci; + struct dw_spi *dws; + int pci_bar = 0; + int ret; + + printk(KERN_INFO "DW: found PCI SPI controller(ID: %04x:%04x)\n", + pdev->vendor, pdev->device); + + ret = pci_enable_device(pdev); + if (ret) + return ret; + + dwpci = kzalloc(sizeof(struct dw_spi_pci), GFP_KERNEL); + if (!dwpci) { + ret = -ENOMEM; + goto err_disable; + } + + dwpci->pdev = pdev; + dws = &dwpci->dws; + + /* Get basic io resource and map it */ + dws->paddr = pci_resource_start(pdev, pci_bar); + dws->iolen = pci_resource_len(pdev, pci_bar); + + ret = pci_request_region(pdev, pci_bar, dev_name(&pdev->dev)); + if (ret) + goto err_kfree; + + dws->regs = ioremap_nocache((unsigned long)dws->paddr, + pci_resource_len(pdev, pci_bar)); + if (!dws->regs) { + ret = -ENOMEM; + goto err_release_reg; + } + + dws->parent_dev = &pdev->dev; + dws->bus_num = 0; + dws->num_cs = 4; + dws->max_freq = 25000000; /* for Moorestwon */ + dws->irq = pdev->irq; + + ret = dw_spi_add_host(dws); + if (ret) + goto err_unmap; + + /* PCI hook and SPI hook use the same drv data */ + pci_set_drvdata(pdev, dwpci); + return 0; + +err_unmap: + iounmap(dws->regs); +err_release_reg: + pci_release_region(pdev, pci_bar); +err_kfree: + kfree(dwpci); +err_disable: + pci_disable_device(pdev); + return ret; +} + +static void __devexit spi_pci_remove(struct pci_dev *pdev) +{ + struct dw_spi_pci *dwpci = pci_get_drvdata(pdev); + + pci_set_drvdata(pdev, NULL); + iounmap(dwpci->dws.regs); + pci_release_region(pdev, 0); + kfree(dwpci); + pci_disable_device(pdev); +} + +#ifdef CONFIG_PM +static int spi_suspend(struct pci_dev *pdev, pm_message_t state) +{ + struct dw_spi_pci *dwpci = pci_get_drvdata(pdev); + int ret; + + ret = dw_spi_suspend_host(&dwpci->dws); + if (ret) + return ret; + pci_save_state(pdev); + pci_disable_device(pdev); + pci_set_power_state(pdev, pci_choose_state(pdev, state)); + return ret; +} + +static int spi_resume(struct pci_dev *pdev) +{ + struct dw_spi_pci *dwpci = pci_get_drvdata(pdev); + int ret; + + pci_set_power_state(pdev, PCI_D0); + pci_restore_state(pdev); + ret = pci_enable_device(pdev); + if (ret) + return ret; + return dw_spi_resume_host(&dwpci->dws); +} +#else +#define spi_suspend NULL +#define spi_resume NULL +#endif + +static const struct pci_device_id pci_ids[] __devinitdata = { + /* Intel Moorestown platform SPI controller 0 */ + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x0800) }, + {}, +}; + +static struct pci_driver dw_spi_driver = { + .name = DRIVER_NAME, + .id_table = pci_ids, + .probe = spi_pci_probe, + .remove = __devexit_p(spi_pci_remove), + .suspend = spi_suspend, + .resume = spi_resume, +}; + +static int __init mrst_spi_init(void) +{ + return pci_register_driver(&dw_spi_driver); +} + +static void __exit mrst_spi_exit(void) +{ + pci_unregister_driver(&dw_spi_driver); +} + +module_init(mrst_spi_init); +module_exit(mrst_spi_exit); + +MODULE_AUTHOR("Feng Tang <feng.tang@intel.com>"); +MODULE_DESCRIPTION("PCI interface driver for DW SPI Core"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/spi/spi_bfin5xx.c b/drivers/spi/spi_bfin5xx.c index 73e24ef5a2f9..1d41058bbab2 100644 --- a/drivers/spi/spi_bfin5xx.c +++ b/drivers/spi/spi_bfin5xx.c @@ -1294,7 +1294,7 @@ static int __init bfin_spi_probe(struct platform_device *pdev) goto out_error_get_res; } - drv_data->regs_base = ioremap(res->start, (res->end - res->start + 1)); + drv_data->regs_base = ioremap(res->start, resource_size(res)); if (drv_data->regs_base == NULL) { dev_err(dev, "Cannot map IO\n"); status = -ENXIO; diff --git a/drivers/spi/spi_mpc8xxx.c b/drivers/spi/spi_mpc8xxx.c index e9390d747bfc..1fb2a6ea328c 100644 --- a/drivers/spi/spi_mpc8xxx.c +++ b/drivers/spi/spi_mpc8xxx.c @@ -1013,7 +1013,7 @@ mpc8xxx_spi_probe(struct device *dev, struct resource *mem, unsigned int irq) init_completion(&mpc8xxx_spi->done); - mpc8xxx_spi->base = ioremap(mem->start, mem->end - mem->start + 1); + mpc8xxx_spi->base = ioremap(mem->start, resource_size(mem)); if (mpc8xxx_spi->base == NULL) { ret = -ENOMEM; goto err_ioremap; diff --git a/drivers/spi/spi_s3c24xx.c b/drivers/spi/spi_s3c24xx.c index 276591569c8b..c010733877ae 100644 --- a/drivers/spi/spi_s3c24xx.c +++ b/drivers/spi/spi_s3c24xx.c @@ -1,7 +1,7 @@ /* linux/drivers/spi/spi_s3c24xx.c * * Copyright (c) 2006 Ben Dooks - * Copyright (c) 2006 Simtec Electronics + * Copyright 2006-2009 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * * This program is free software; you can redistribute it and/or modify @@ -28,6 +28,11 @@ #include <plat/regs-spi.h> #include <mach/spi.h> +#include <plat/fiq.h> +#include <asm/fiq.h> + +#include "spi_s3c24xx_fiq.h" + /** * s3c24xx_spi_devstate - per device data * @hz: Last frequency calculated for @sppre field. @@ -42,6 +47,13 @@ struct s3c24xx_spi_devstate { u8 sppre; }; +enum spi_fiq_mode { + FIQ_MODE_NONE = 0, + FIQ_MODE_TX = 1, + FIQ_MODE_RX = 2, + FIQ_MODE_TXRX = 3, +}; + struct s3c24xx_spi { /* bitbang has to be first */ struct spi_bitbang bitbang; @@ -52,6 +64,11 @@ struct s3c24xx_spi { int len; int count; + struct fiq_handler fiq_handler; + enum spi_fiq_mode fiq_mode; + unsigned char fiq_inuse; + unsigned char fiq_claimed; + void (*set_cs)(struct s3c2410_spi_info *spi, int cs, int pol); @@ -67,6 +84,7 @@ struct s3c24xx_spi { struct s3c2410_spi_info *pdata; }; + #define SPCON_DEFAULT (S3C2410_SPCON_MSTR | S3C2410_SPCON_SMOD_INT) #define SPPIN_DEFAULT (S3C2410_SPPIN_KEEP) @@ -127,7 +145,7 @@ static int s3c24xx_spi_update_state(struct spi_device *spi, } if (spi->mode != cs->mode) { - u8 spcon = SPCON_DEFAULT; + u8 spcon = SPCON_DEFAULT | S3C2410_SPCON_ENSCK; if (spi->mode & SPI_CPHA) spcon |= S3C2410_SPCON_CPHA_FMTB; @@ -214,13 +232,196 @@ static inline unsigned int hw_txbyte(struct s3c24xx_spi *hw, int count) return hw->tx ? hw->tx[count] : 0; } +#ifdef CONFIG_SPI_S3C24XX_FIQ +/* Support for FIQ based pseudo-DMA to improve the transfer speed. + * + * This code uses the assembly helper in spi_s3c24xx_spi.S which is + * used by the FIQ core to move data between main memory and the peripheral + * block. Since this is code running on the processor, there is no problem + * with cache coherency of the buffers, so we can use any buffer we like. + */ + +/** + * struct spi_fiq_code - FIQ code and header + * @length: The length of the code fragment, excluding this header. + * @ack_offset: The offset from @data to the word to place the IRQ ACK bit at. + * @data: The code itself to install as a FIQ handler. + */ +struct spi_fiq_code { + u32 length; + u32 ack_offset; + u8 data[0]; +}; + +extern struct spi_fiq_code s3c24xx_spi_fiq_txrx; +extern struct spi_fiq_code s3c24xx_spi_fiq_tx; +extern struct spi_fiq_code s3c24xx_spi_fiq_rx; + +/** + * ack_bit - turn IRQ into IRQ acknowledgement bit + * @irq: The interrupt number + * + * Returns the bit to write to the interrupt acknowledge register. + */ +static inline u32 ack_bit(unsigned int irq) +{ + return 1 << (irq - IRQ_EINT0); +} + +/** + * s3c24xx_spi_tryfiq - attempt to claim and setup FIQ for transfer + * @hw: The hardware state. + * + * Claim the FIQ handler (only one can be active at any one time) and + * then setup the correct transfer code for this transfer. + * + * This call updates all the necessary state information if sucessful, + * so the caller does not need to do anything more than start the transfer + * as normal, since the IRQ will have been re-routed to the FIQ handler. +*/ +void s3c24xx_spi_tryfiq(struct s3c24xx_spi *hw) +{ + struct pt_regs regs; + enum spi_fiq_mode mode; + struct spi_fiq_code *code; + int ret; + + if (!hw->fiq_claimed) { + /* try and claim fiq if we haven't got it, and if not + * then return and simply use another transfer method */ + + ret = claim_fiq(&hw->fiq_handler); + if (ret) + return; + } + + if (hw->tx && !hw->rx) + mode = FIQ_MODE_TX; + else if (hw->rx && !hw->tx) + mode = FIQ_MODE_RX; + else + mode = FIQ_MODE_TXRX; + + regs.uregs[fiq_rspi] = (long)hw->regs; + regs.uregs[fiq_rrx] = (long)hw->rx; + regs.uregs[fiq_rtx] = (long)hw->tx + 1; + regs.uregs[fiq_rcount] = hw->len - 1; + regs.uregs[fiq_rirq] = (long)S3C24XX_VA_IRQ; + + set_fiq_regs(®s); + + if (hw->fiq_mode != mode) { + u32 *ack_ptr; + + hw->fiq_mode = mode; + + switch (mode) { + case FIQ_MODE_TX: + code = &s3c24xx_spi_fiq_tx; + break; + case FIQ_MODE_RX: + code = &s3c24xx_spi_fiq_rx; + break; + case FIQ_MODE_TXRX: + code = &s3c24xx_spi_fiq_txrx; + break; + default: + code = NULL; + } + + BUG_ON(!code); + + ack_ptr = (u32 *)&code->data[code->ack_offset]; + *ack_ptr = ack_bit(hw->irq); + + set_fiq_handler(&code->data, code->length); + } + + s3c24xx_set_fiq(hw->irq, true); + + hw->fiq_mode = mode; + hw->fiq_inuse = 1; +} + +/** + * s3c24xx_spi_fiqop - FIQ core code callback + * @pw: Data registered with the handler + * @release: Whether this is a release or a return. + * + * Called by the FIQ code when another module wants to use the FIQ, so + * return whether we are currently using this or not and then update our + * internal state. + */ +static int s3c24xx_spi_fiqop(void *pw, int release) +{ + struct s3c24xx_spi *hw = pw; + int ret = 0; + + if (release) { + if (hw->fiq_inuse) + ret = -EBUSY; + + /* note, we do not need to unroute the FIQ, as the FIQ + * vector code de-routes it to signal the end of transfer */ + + hw->fiq_mode = FIQ_MODE_NONE; + hw->fiq_claimed = 0; + } else { + hw->fiq_claimed = 1; + } + + return ret; +} + +/** + * s3c24xx_spi_initfiq - setup the information for the FIQ core + * @hw: The hardware state. + * + * Setup the fiq_handler block to pass to the FIQ core. + */ +static inline void s3c24xx_spi_initfiq(struct s3c24xx_spi *hw) +{ + hw->fiq_handler.dev_id = hw; + hw->fiq_handler.name = dev_name(hw->dev); + hw->fiq_handler.fiq_op = s3c24xx_spi_fiqop; +} + +/** + * s3c24xx_spi_usefiq - return if we should be using FIQ. + * @hw: The hardware state. + * + * Return true if the platform data specifies whether this channel is + * allowed to use the FIQ. + */ +static inline bool s3c24xx_spi_usefiq(struct s3c24xx_spi *hw) +{ + return hw->pdata->use_fiq; +} + +/** + * s3c24xx_spi_usingfiq - return if channel is using FIQ + * @spi: The hardware state. + * + * Return whether the channel is currently using the FIQ (separate from + * whether the FIQ is claimed). + */ +static inline bool s3c24xx_spi_usingfiq(struct s3c24xx_spi *spi) +{ + return spi->fiq_inuse; +} +#else + +static inline void s3c24xx_spi_initfiq(struct s3c24xx_spi *s) { } +static inline void s3c24xx_spi_tryfiq(struct s3c24xx_spi *s) { } +static inline bool s3c24xx_spi_usefiq(struct s3c24xx_spi *s) { return false; } +static inline bool s3c24xx_spi_usingfiq(struct s3c24xx_spi *s) { return false; } + +#endif /* CONFIG_SPI_S3C24XX_FIQ */ + static int s3c24xx_spi_txrx(struct spi_device *spi, struct spi_transfer *t) { struct s3c24xx_spi *hw = to_hw(spi); - dev_dbg(&spi->dev, "txrx: tx %p, rx %p, len %d\n", - t->tx_buf, t->rx_buf, t->len); - hw->tx = t->tx_buf; hw->rx = t->rx_buf; hw->len = t->len; @@ -228,11 +429,14 @@ static int s3c24xx_spi_txrx(struct spi_device *spi, struct spi_transfer *t) init_completion(&hw->done); + hw->fiq_inuse = 0; + if (s3c24xx_spi_usefiq(hw) && t->len >= 3) + s3c24xx_spi_tryfiq(hw); + /* send the first byte */ writeb(hw_txbyte(hw, 0), hw->regs + S3C2410_SPTDAT); wait_for_completion(&hw->done); - return hw->count; } @@ -254,17 +458,27 @@ static irqreturn_t s3c24xx_spi_irq(int irq, void *dev) goto irq_done; } - hw->count++; + if (!s3c24xx_spi_usingfiq(hw)) { + hw->count++; - if (hw->rx) - hw->rx[count] = readb(hw->regs + S3C2410_SPRDAT); + if (hw->rx) + hw->rx[count] = readb(hw->regs + S3C2410_SPRDAT); - count++; + count++; + + if (count < hw->len) + writeb(hw_txbyte(hw, count), hw->regs + S3C2410_SPTDAT); + else + complete(&hw->done); + } else { + hw->count = hw->len; + hw->fiq_inuse = 0; + + if (hw->rx) + hw->rx[hw->len-1] = readb(hw->regs + S3C2410_SPRDAT); - if (count < hw->len) - writeb(hw_txbyte(hw, count), hw->regs + S3C2410_SPTDAT); - else complete(&hw->done); + } irq_done: return IRQ_HANDLED; @@ -322,6 +536,10 @@ static int __init s3c24xx_spi_probe(struct platform_device *pdev) platform_set_drvdata(pdev, hw); init_completion(&hw->done); + /* initialise fiq handler */ + + s3c24xx_spi_initfiq(hw); + /* setup the master state. */ /* the spi->mode bits understood by this driver: */ diff --git a/drivers/spi/spi_s3c24xx_fiq.S b/drivers/spi/spi_s3c24xx_fiq.S new file mode 100644 index 000000000000..3793cae361db --- /dev/null +++ b/drivers/spi/spi_s3c24xx_fiq.S @@ -0,0 +1,116 @@ +/* linux/drivers/spi/spi_s3c24xx_fiq.S + * + * Copyright 2009 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * S3C24XX SPI - FIQ pseudo-DMA transfer code + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/linkage.h> +#include <asm/assembler.h> + +#include <mach/map.h> +#include <mach/regs-irq.h> +#include <plat/regs-spi.h> + +#include "spi_s3c24xx_fiq.h" + + .text + + @ entry to these routines is as follows, with the register names + @ defined in fiq.h so that they can be shared with the C files which + @ setup the calling registers. + @ + @ fiq_rirq The base of the IRQ registers to find S3C2410_SRCPND + @ fiq_rtmp Temporary register to hold tx/rx data + @ fiq_rspi The base of the SPI register block + @ fiq_rtx The tx buffer pointer + @ fiq_rrx The rx buffer pointer + @ fiq_rcount The number of bytes to move + + @ each entry starts with a word entry of how long it is + @ and an offset to the irq acknowledgment word + +ENTRY(s3c24xx_spi_fiq_rx) +s3c24xx_spi_fix_rx: + .word fiq_rx_end - fiq_rx_start + .word fiq_rx_irq_ack - fiq_rx_start +fiq_rx_start: + ldr fiq_rtmp, fiq_rx_irq_ack + str fiq_rtmp, [ fiq_rirq, # S3C2410_SRCPND - S3C24XX_VA_IRQ ] + + ldrb fiq_rtmp, [ fiq_rspi, # S3C2410_SPRDAT ] + strb fiq_rtmp, [ fiq_rrx ], #1 + + mov fiq_rtmp, #0xff + strb fiq_rtmp, [ fiq_rspi, # S3C2410_SPTDAT ] + + subs fiq_rcount, fiq_rcount, #1 + subnes pc, lr, #4 @@ return, still have work to do + + @@ set IRQ controller so that next op will trigger IRQ + mov fiq_rtmp, #0 + str fiq_rtmp, [ fiq_rirq, # S3C2410_INTMOD - S3C24XX_VA_IRQ ] + subs pc, lr, #4 + +fiq_rx_irq_ack: + .word 0 +fiq_rx_end: + +ENTRY(s3c24xx_spi_fiq_txrx) +s3c24xx_spi_fiq_txrx: + .word fiq_txrx_end - fiq_txrx_start + .word fiq_txrx_irq_ack - fiq_txrx_start +fiq_txrx_start: + + ldrb fiq_rtmp, [ fiq_rspi, # S3C2410_SPRDAT ] + strb fiq_rtmp, [ fiq_rrx ], #1 + + ldr fiq_rtmp, fiq_txrx_irq_ack + str fiq_rtmp, [ fiq_rirq, # S3C2410_SRCPND - S3C24XX_VA_IRQ ] + + ldrb fiq_rtmp, [ fiq_rtx ], #1 + strb fiq_rtmp, [ fiq_rspi, # S3C2410_SPTDAT ] + + subs fiq_rcount, fiq_rcount, #1 + subnes pc, lr, #4 @@ return, still have work to do + + mov fiq_rtmp, #0 + str fiq_rtmp, [ fiq_rirq, # S3C2410_INTMOD - S3C24XX_VA_IRQ ] + subs pc, lr, #4 + +fiq_txrx_irq_ack: + .word 0 + +fiq_txrx_end: + +ENTRY(s3c24xx_spi_fiq_tx) +s3c24xx_spi_fix_tx: + .word fiq_tx_end - fiq_tx_start + .word fiq_tx_irq_ack - fiq_tx_start +fiq_tx_start: + ldrb fiq_rtmp, [ fiq_rspi, # S3C2410_SPRDAT ] + + ldr fiq_rtmp, fiq_tx_irq_ack + str fiq_rtmp, [ fiq_rirq, # S3C2410_SRCPND - S3C24XX_VA_IRQ ] + + ldrb fiq_rtmp, [ fiq_rtx ], #1 + strb fiq_rtmp, [ fiq_rspi, # S3C2410_SPTDAT ] + + subs fiq_rcount, fiq_rcount, #1 + subnes pc, lr, #4 @@ return, still have work to do + + mov fiq_rtmp, #0 + str fiq_rtmp, [ fiq_rirq, # S3C2410_INTMOD - S3C24XX_VA_IRQ ] + subs pc, lr, #4 + +fiq_tx_irq_ack: + .word 0 + +fiq_tx_end: + + .end diff --git a/drivers/spi/spi_s3c24xx_fiq.h b/drivers/spi/spi_s3c24xx_fiq.h new file mode 100644 index 000000000000..a5950bb25b51 --- /dev/null +++ b/drivers/spi/spi_s3c24xx_fiq.h @@ -0,0 +1,26 @@ +/* linux/drivers/spi/spi_s3c24xx_fiq.h + * + * Copyright 2009 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * S3C24XX SPI - FIQ pseudo-DMA transfer support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/* We have R8 through R13 to play with */ + +#ifdef __ASSEMBLY__ +#define __REG_NR(x) r##x +#else +#define __REG_NR(x) (x) +#endif + +#define fiq_rspi __REG_NR(8) +#define fiq_rtmp __REG_NR(9) +#define fiq_rrx __REG_NR(10) +#define fiq_rtx __REG_NR(11) +#define fiq_rcount __REG_NR(12) +#define fiq_rirq __REG_NR(13) diff --git a/drivers/spi/spi_s3c64xx.c b/drivers/spi/spi_s3c64xx.c new file mode 100644 index 000000000000..88a456dba967 --- /dev/null +++ b/drivers/spi/spi_s3c64xx.c @@ -0,0 +1,1196 @@ +/* linux/drivers/spi/spi_s3c64xx.c + * + * Copyright (C) 2009 Samsung Electronics Ltd. + * Jaswinder Singh <jassi.brar@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/workqueue.h> +#include <linux/delay.h> +#include <linux/clk.h> +#include <linux/dma-mapping.h> +#include <linux/platform_device.h> +#include <linux/spi/spi.h> + +#include <mach/dma.h> +#include <plat/spi.h> + +/* Registers and bit-fields */ + +#define S3C64XX_SPI_CH_CFG 0x00 +#define S3C64XX_SPI_CLK_CFG 0x04 +#define S3C64XX_SPI_MODE_CFG 0x08 +#define S3C64XX_SPI_SLAVE_SEL 0x0C +#define S3C64XX_SPI_INT_EN 0x10 +#define S3C64XX_SPI_STATUS 0x14 +#define S3C64XX_SPI_TX_DATA 0x18 +#define S3C64XX_SPI_RX_DATA 0x1C +#define S3C64XX_SPI_PACKET_CNT 0x20 +#define S3C64XX_SPI_PENDING_CLR 0x24 +#define S3C64XX_SPI_SWAP_CFG 0x28 +#define S3C64XX_SPI_FB_CLK 0x2C + +#define S3C64XX_SPI_CH_HS_EN (1<<6) /* High Speed Enable */ +#define S3C64XX_SPI_CH_SW_RST (1<<5) +#define S3C64XX_SPI_CH_SLAVE (1<<4) +#define S3C64XX_SPI_CPOL_L (1<<3) +#define S3C64XX_SPI_CPHA_B (1<<2) +#define S3C64XX_SPI_CH_RXCH_ON (1<<1) +#define S3C64XX_SPI_CH_TXCH_ON (1<<0) + +#define S3C64XX_SPI_CLKSEL_SRCMSK (3<<9) +#define S3C64XX_SPI_CLKSEL_SRCSHFT 9 +#define S3C64XX_SPI_ENCLK_ENABLE (1<<8) +#define S3C64XX_SPI_PSR_MASK 0xff + +#define S3C64XX_SPI_MODE_CH_TSZ_BYTE (0<<29) +#define S3C64XX_SPI_MODE_CH_TSZ_HALFWORD (1<<29) +#define S3C64XX_SPI_MODE_CH_TSZ_WORD (2<<29) +#define S3C64XX_SPI_MODE_CH_TSZ_MASK (3<<29) +#define S3C64XX_SPI_MODE_BUS_TSZ_BYTE (0<<17) +#define S3C64XX_SPI_MODE_BUS_TSZ_HALFWORD (1<<17) +#define S3C64XX_SPI_MODE_BUS_TSZ_WORD (2<<17) +#define S3C64XX_SPI_MODE_BUS_TSZ_MASK (3<<17) +#define S3C64XX_SPI_MODE_RXDMA_ON (1<<2) +#define S3C64XX_SPI_MODE_TXDMA_ON (1<<1) +#define S3C64XX_SPI_MODE_4BURST (1<<0) + +#define S3C64XX_SPI_SLAVE_AUTO (1<<1) +#define S3C64XX_SPI_SLAVE_SIG_INACT (1<<0) + +#define S3C64XX_SPI_ACT(c) writel(0, (c)->regs + S3C64XX_SPI_SLAVE_SEL) + +#define S3C64XX_SPI_DEACT(c) writel(S3C64XX_SPI_SLAVE_SIG_INACT, \ + (c)->regs + S3C64XX_SPI_SLAVE_SEL) + +#define S3C64XX_SPI_INT_TRAILING_EN (1<<6) +#define S3C64XX_SPI_INT_RX_OVERRUN_EN (1<<5) +#define S3C64XX_SPI_INT_RX_UNDERRUN_EN (1<<4) +#define S3C64XX_SPI_INT_TX_OVERRUN_EN (1<<3) +#define S3C64XX_SPI_INT_TX_UNDERRUN_EN (1<<2) +#define S3C64XX_SPI_INT_RX_FIFORDY_EN (1<<1) +#define S3C64XX_SPI_INT_TX_FIFORDY_EN (1<<0) + +#define S3C64XX_SPI_ST_RX_OVERRUN_ERR (1<<5) +#define S3C64XX_SPI_ST_RX_UNDERRUN_ERR (1<<4) +#define S3C64XX_SPI_ST_TX_OVERRUN_ERR (1<<3) +#define S3C64XX_SPI_ST_TX_UNDERRUN_ERR (1<<2) +#define S3C64XX_SPI_ST_RX_FIFORDY (1<<1) +#define S3C64XX_SPI_ST_TX_FIFORDY (1<<0) + +#define S3C64XX_SPI_PACKET_CNT_EN (1<<16) + +#define S3C64XX_SPI_PND_TX_UNDERRUN_CLR (1<<4) +#define S3C64XX_SPI_PND_TX_OVERRUN_CLR (1<<3) +#define S3C64XX_SPI_PND_RX_UNDERRUN_CLR (1<<2) +#define S3C64XX_SPI_PND_RX_OVERRUN_CLR (1<<1) +#define S3C64XX_SPI_PND_TRAILING_CLR (1<<0) + +#define S3C64XX_SPI_SWAP_RX_HALF_WORD (1<<7) +#define S3C64XX_SPI_SWAP_RX_BYTE (1<<6) +#define S3C64XX_SPI_SWAP_RX_BIT (1<<5) +#define S3C64XX_SPI_SWAP_RX_EN (1<<4) +#define S3C64XX_SPI_SWAP_TX_HALF_WORD (1<<3) +#define S3C64XX_SPI_SWAP_TX_BYTE (1<<2) +#define S3C64XX_SPI_SWAP_TX_BIT (1<<1) +#define S3C64XX_SPI_SWAP_TX_EN (1<<0) + +#define S3C64XX_SPI_FBCLK_MSK (3<<0) + +#define S3C64XX_SPI_ST_TRLCNTZ(v, i) ((((v) >> (i)->rx_lvl_offset) & \ + (((i)->fifo_lvl_mask + 1))) \ + ? 1 : 0) + +#define S3C64XX_SPI_ST_TX_DONE(v, i) ((((v) >> (i)->rx_lvl_offset) & \ + (((i)->fifo_lvl_mask + 1) << 1)) \ + ? 1 : 0) +#define TX_FIFO_LVL(v, i) (((v) >> 6) & (i)->fifo_lvl_mask) +#define RX_FIFO_LVL(v, i) (((v) >> (i)->rx_lvl_offset) & (i)->fifo_lvl_mask) + +#define S3C64XX_SPI_MAX_TRAILCNT 0x3ff +#define S3C64XX_SPI_TRAILCNT_OFF 19 + +#define S3C64XX_SPI_TRAILCNT S3C64XX_SPI_MAX_TRAILCNT + +#define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t) + +#define SUSPND (1<<0) +#define SPIBUSY (1<<1) +#define RXBUSY (1<<2) +#define TXBUSY (1<<3) + +/** + * struct s3c64xx_spi_driver_data - Runtime info holder for SPI driver. + * @clk: Pointer to the spi clock. + * @master: Pointer to the SPI Protocol master. + * @workqueue: Work queue for the SPI xfer requests. + * @cntrlr_info: Platform specific data for the controller this driver manages. + * @tgl_spi: Pointer to the last CS left untoggled by the cs_change hint. + * @work: Work + * @queue: To log SPI xfer requests. + * @lock: Controller specific lock. + * @state: Set of FLAGS to indicate status. + * @rx_dmach: Controller's DMA channel for Rx. + * @tx_dmach: Controller's DMA channel for Tx. + * @sfr_start: BUS address of SPI controller regs. + * @regs: Pointer to ioremap'ed controller registers. + * @xfer_completion: To indicate completion of xfer task. + * @cur_mode: Stores the active configuration of the controller. + * @cur_bpw: Stores the active bits per word settings. + * @cur_speed: Stores the active xfer clock speed. + */ +struct s3c64xx_spi_driver_data { + void __iomem *regs; + struct clk *clk; + struct platform_device *pdev; + struct spi_master *master; + struct workqueue_struct *workqueue; + struct s3c64xx_spi_cntrlr_info *cntrlr_info; + struct spi_device *tgl_spi; + struct work_struct work; + struct list_head queue; + spinlock_t lock; + enum dma_ch rx_dmach; + enum dma_ch tx_dmach; + unsigned long sfr_start; + struct completion xfer_completion; + unsigned state; + unsigned cur_mode, cur_bpw; + unsigned cur_speed; +}; + +static struct s3c2410_dma_client s3c64xx_spi_dma_client = { + .name = "samsung-spi-dma", +}; + +static void flush_fifo(struct s3c64xx_spi_driver_data *sdd) +{ + struct s3c64xx_spi_cntrlr_info *sci = sdd->cntrlr_info; + void __iomem *regs = sdd->regs; + unsigned long loops; + u32 val; + + writel(0, regs + S3C64XX_SPI_PACKET_CNT); + + val = readl(regs + S3C64XX_SPI_CH_CFG); + val |= S3C64XX_SPI_CH_SW_RST; + val &= ~S3C64XX_SPI_CH_HS_EN; + writel(val, regs + S3C64XX_SPI_CH_CFG); + + /* Flush TxFIFO*/ + loops = msecs_to_loops(1); + do { + val = readl(regs + S3C64XX_SPI_STATUS); + } while (TX_FIFO_LVL(val, sci) && loops--); + + /* Flush RxFIFO*/ + loops = msecs_to_loops(1); + do { + val = readl(regs + S3C64XX_SPI_STATUS); + if (RX_FIFO_LVL(val, sci)) + readl(regs + S3C64XX_SPI_RX_DATA); + else + break; + } while (loops--); + + val = readl(regs + S3C64XX_SPI_CH_CFG); + val &= ~S3C64XX_SPI_CH_SW_RST; + writel(val, regs + S3C64XX_SPI_CH_CFG); + + val = readl(regs + S3C64XX_SPI_MODE_CFG); + val &= ~(S3C64XX_SPI_MODE_TXDMA_ON | S3C64XX_SPI_MODE_RXDMA_ON); + writel(val, regs + S3C64XX_SPI_MODE_CFG); + + val = readl(regs + S3C64XX_SPI_CH_CFG); + val &= ~(S3C64XX_SPI_CH_RXCH_ON | S3C64XX_SPI_CH_TXCH_ON); + writel(val, regs + S3C64XX_SPI_CH_CFG); +} + +static void enable_datapath(struct s3c64xx_spi_driver_data *sdd, + struct spi_device *spi, + struct spi_transfer *xfer, int dma_mode) +{ + struct s3c64xx_spi_cntrlr_info *sci = sdd->cntrlr_info; + void __iomem *regs = sdd->regs; + u32 modecfg, chcfg; + + modecfg = readl(regs + S3C64XX_SPI_MODE_CFG); + modecfg &= ~(S3C64XX_SPI_MODE_TXDMA_ON | S3C64XX_SPI_MODE_RXDMA_ON); + + chcfg = readl(regs + S3C64XX_SPI_CH_CFG); + chcfg &= ~S3C64XX_SPI_CH_TXCH_ON; + + if (dma_mode) { + chcfg &= ~S3C64XX_SPI_CH_RXCH_ON; + } else { + /* Always shift in data in FIFO, even if xfer is Tx only, + * this helps setting PCKT_CNT value for generating clocks + * as exactly needed. + */ + chcfg |= S3C64XX_SPI_CH_RXCH_ON; + writel(((xfer->len * 8 / sdd->cur_bpw) & 0xffff) + | S3C64XX_SPI_PACKET_CNT_EN, + regs + S3C64XX_SPI_PACKET_CNT); + } + + if (xfer->tx_buf != NULL) { + sdd->state |= TXBUSY; + chcfg |= S3C64XX_SPI_CH_TXCH_ON; + if (dma_mode) { + modecfg |= S3C64XX_SPI_MODE_TXDMA_ON; + s3c2410_dma_config(sdd->tx_dmach, 1); + s3c2410_dma_enqueue(sdd->tx_dmach, (void *)sdd, + xfer->tx_dma, xfer->len); + s3c2410_dma_ctrl(sdd->tx_dmach, S3C2410_DMAOP_START); + } else { + unsigned char *buf = (unsigned char *) xfer->tx_buf; + int i = 0; + while (i < xfer->len) + writeb(buf[i++], regs + S3C64XX_SPI_TX_DATA); + } + } + + if (xfer->rx_buf != NULL) { + sdd->state |= RXBUSY; + + if (sci->high_speed && sdd->cur_speed >= 30000000UL + && !(sdd->cur_mode & SPI_CPHA)) + chcfg |= S3C64XX_SPI_CH_HS_EN; + + if (dma_mode) { + modecfg |= S3C64XX_SPI_MODE_RXDMA_ON; + chcfg |= S3C64XX_SPI_CH_RXCH_ON; + writel(((xfer->len * 8 / sdd->cur_bpw) & 0xffff) + | S3C64XX_SPI_PACKET_CNT_EN, + regs + S3C64XX_SPI_PACKET_CNT); + s3c2410_dma_config(sdd->rx_dmach, 1); + s3c2410_dma_enqueue(sdd->rx_dmach, (void *)sdd, + xfer->rx_dma, xfer->len); + s3c2410_dma_ctrl(sdd->rx_dmach, S3C2410_DMAOP_START); + } + } + + writel(modecfg, regs + S3C64XX_SPI_MODE_CFG); + writel(chcfg, regs + S3C64XX_SPI_CH_CFG); +} + +static inline void enable_cs(struct s3c64xx_spi_driver_data *sdd, + struct spi_device *spi) +{ + struct s3c64xx_spi_csinfo *cs; + + if (sdd->tgl_spi != NULL) { /* If last device toggled after mssg */ + if (sdd->tgl_spi != spi) { /* if last mssg on diff device */ + /* Deselect the last toggled device */ + cs = sdd->tgl_spi->controller_data; + cs->set_level(spi->mode & SPI_CS_HIGH ? 0 : 1); + } + sdd->tgl_spi = NULL; + } + + cs = spi->controller_data; + cs->set_level(spi->mode & SPI_CS_HIGH ? 1 : 0); +} + +static int wait_for_xfer(struct s3c64xx_spi_driver_data *sdd, + struct spi_transfer *xfer, int dma_mode) +{ + struct s3c64xx_spi_cntrlr_info *sci = sdd->cntrlr_info; + void __iomem *regs = sdd->regs; + unsigned long val; + int ms; + + /* millisecs to xfer 'len' bytes @ 'cur_speed' */ + ms = xfer->len * 8 * 1000 / sdd->cur_speed; + ms += 5; /* some tolerance */ + + if (dma_mode) { + val = msecs_to_jiffies(ms) + 10; + val = wait_for_completion_timeout(&sdd->xfer_completion, val); + } else { + val = msecs_to_loops(ms); + do { + val = readl(regs + S3C64XX_SPI_STATUS); + } while (RX_FIFO_LVL(val, sci) < xfer->len && --val); + } + + if (!val) + return -EIO; + + if (dma_mode) { + u32 status; + + /* + * DmaTx returns after simply writing data in the FIFO, + * w/o waiting for real transmission on the bus to finish. + * DmaRx returns only after Dma read data from FIFO which + * needs bus transmission to finish, so we don't worry if + * Xfer involved Rx(with or without Tx). + */ + if (xfer->rx_buf == NULL) { + val = msecs_to_loops(10); + status = readl(regs + S3C64XX_SPI_STATUS); + while ((TX_FIFO_LVL(status, sci) + || !S3C64XX_SPI_ST_TX_DONE(status, sci)) + && --val) { + cpu_relax(); + status = readl(regs + S3C64XX_SPI_STATUS); + } + + if (!val) + return -EIO; + } + } else { + unsigned char *buf; + int i; + + /* If it was only Tx */ + if (xfer->rx_buf == NULL) { + sdd->state &= ~TXBUSY; + return 0; + } + + i = 0; + buf = xfer->rx_buf; + while (i < xfer->len) + buf[i++] = readb(regs + S3C64XX_SPI_RX_DATA); + + sdd->state &= ~RXBUSY; + } + + return 0; +} + +static inline void disable_cs(struct s3c64xx_spi_driver_data *sdd, + struct spi_device *spi) +{ + struct s3c64xx_spi_csinfo *cs = spi->controller_data; + + if (sdd->tgl_spi == spi) + sdd->tgl_spi = NULL; + + cs->set_level(spi->mode & SPI_CS_HIGH ? 0 : 1); +} + +static void s3c64xx_spi_config(struct s3c64xx_spi_driver_data *sdd) +{ + struct s3c64xx_spi_cntrlr_info *sci = sdd->cntrlr_info; + void __iomem *regs = sdd->regs; + u32 val; + + /* Disable Clock */ + val = readl(regs + S3C64XX_SPI_CLK_CFG); + val &= ~S3C64XX_SPI_ENCLK_ENABLE; + writel(val, regs + S3C64XX_SPI_CLK_CFG); + + /* Set Polarity and Phase */ + val = readl(regs + S3C64XX_SPI_CH_CFG); + val &= ~(S3C64XX_SPI_CH_SLAVE | + S3C64XX_SPI_CPOL_L | + S3C64XX_SPI_CPHA_B); + + if (sdd->cur_mode & SPI_CPOL) + val |= S3C64XX_SPI_CPOL_L; + + if (sdd->cur_mode & SPI_CPHA) + val |= S3C64XX_SPI_CPHA_B; + + writel(val, regs + S3C64XX_SPI_CH_CFG); + + /* Set Channel & DMA Mode */ + val = readl(regs + S3C64XX_SPI_MODE_CFG); + val &= ~(S3C64XX_SPI_MODE_BUS_TSZ_MASK + | S3C64XX_SPI_MODE_CH_TSZ_MASK); + + switch (sdd->cur_bpw) { + case 32: + val |= S3C64XX_SPI_MODE_BUS_TSZ_WORD; + break; + case 16: + val |= S3C64XX_SPI_MODE_BUS_TSZ_HALFWORD; + break; + default: + val |= S3C64XX_SPI_MODE_BUS_TSZ_BYTE; + break; + } + val |= S3C64XX_SPI_MODE_CH_TSZ_BYTE; /* Always 8bits wide */ + + writel(val, regs + S3C64XX_SPI_MODE_CFG); + + /* Configure Clock */ + val = readl(regs + S3C64XX_SPI_CLK_CFG); + val &= ~S3C64XX_SPI_PSR_MASK; + val |= ((clk_get_rate(sci->src_clk) / sdd->cur_speed / 2 - 1) + & S3C64XX_SPI_PSR_MASK); + writel(val, regs + S3C64XX_SPI_CLK_CFG); + + /* Enable Clock */ + val = readl(regs + S3C64XX_SPI_CLK_CFG); + val |= S3C64XX_SPI_ENCLK_ENABLE; + writel(val, regs + S3C64XX_SPI_CLK_CFG); +} + +void s3c64xx_spi_dma_rxcb(struct s3c2410_dma_chan *chan, void *buf_id, + int size, enum s3c2410_dma_buffresult res) +{ + struct s3c64xx_spi_driver_data *sdd = buf_id; + unsigned long flags; + + spin_lock_irqsave(&sdd->lock, flags); + + if (res == S3C2410_RES_OK) + sdd->state &= ~RXBUSY; + else + dev_err(&sdd->pdev->dev, "DmaAbrtRx-%d\n", size); + + /* If the other done */ + if (!(sdd->state & TXBUSY)) + complete(&sdd->xfer_completion); + + spin_unlock_irqrestore(&sdd->lock, flags); +} + +void s3c64xx_spi_dma_txcb(struct s3c2410_dma_chan *chan, void *buf_id, + int size, enum s3c2410_dma_buffresult res) +{ + struct s3c64xx_spi_driver_data *sdd = buf_id; + unsigned long flags; + + spin_lock_irqsave(&sdd->lock, flags); + + if (res == S3C2410_RES_OK) + sdd->state &= ~TXBUSY; + else + dev_err(&sdd->pdev->dev, "DmaAbrtTx-%d \n", size); + + /* If the other done */ + if (!(sdd->state & RXBUSY)) + complete(&sdd->xfer_completion); + + spin_unlock_irqrestore(&sdd->lock, flags); +} + +#define XFER_DMAADDR_INVALID DMA_BIT_MASK(32) + +static int s3c64xx_spi_map_mssg(struct s3c64xx_spi_driver_data *sdd, + struct spi_message *msg) +{ + struct device *dev = &sdd->pdev->dev; + struct spi_transfer *xfer; + + if (msg->is_dma_mapped) + return 0; + + /* First mark all xfer unmapped */ + list_for_each_entry(xfer, &msg->transfers, transfer_list) { + xfer->rx_dma = XFER_DMAADDR_INVALID; + xfer->tx_dma = XFER_DMAADDR_INVALID; + } + + /* Map until end or first fail */ + list_for_each_entry(xfer, &msg->transfers, transfer_list) { + + if (xfer->tx_buf != NULL) { + xfer->tx_dma = dma_map_single(dev, xfer->tx_buf, + xfer->len, DMA_TO_DEVICE); + if (dma_mapping_error(dev, xfer->tx_dma)) { + dev_err(dev, "dma_map_single Tx failed\n"); + xfer->tx_dma = XFER_DMAADDR_INVALID; + return -ENOMEM; + } + } + + if (xfer->rx_buf != NULL) { + xfer->rx_dma = dma_map_single(dev, xfer->rx_buf, + xfer->len, DMA_FROM_DEVICE); + if (dma_mapping_error(dev, xfer->rx_dma)) { + dev_err(dev, "dma_map_single Rx failed\n"); + dma_unmap_single(dev, xfer->tx_dma, + xfer->len, DMA_TO_DEVICE); + xfer->tx_dma = XFER_DMAADDR_INVALID; + xfer->rx_dma = XFER_DMAADDR_INVALID; + return -ENOMEM; + } + } + } + + return 0; +} + +static void s3c64xx_spi_unmap_mssg(struct s3c64xx_spi_driver_data *sdd, + struct spi_message *msg) +{ + struct device *dev = &sdd->pdev->dev; + struct spi_transfer *xfer; + + if (msg->is_dma_mapped) + return; + + list_for_each_entry(xfer, &msg->transfers, transfer_list) { + + if (xfer->rx_buf != NULL + && xfer->rx_dma != XFER_DMAADDR_INVALID) + dma_unmap_single(dev, xfer->rx_dma, + xfer->len, DMA_FROM_DEVICE); + + if (xfer->tx_buf != NULL + && xfer->tx_dma != XFER_DMAADDR_INVALID) + dma_unmap_single(dev, xfer->tx_dma, + xfer->len, DMA_TO_DEVICE); + } +} + +static void handle_msg(struct s3c64xx_spi_driver_data *sdd, + struct spi_message *msg) +{ + struct s3c64xx_spi_cntrlr_info *sci = sdd->cntrlr_info; + struct spi_device *spi = msg->spi; + struct s3c64xx_spi_csinfo *cs = spi->controller_data; + struct spi_transfer *xfer; + int status = 0, cs_toggle = 0; + u32 speed; + u8 bpw; + + /* If Master's(controller) state differs from that needed by Slave */ + if (sdd->cur_speed != spi->max_speed_hz + || sdd->cur_mode != spi->mode + || sdd->cur_bpw != spi->bits_per_word) { + sdd->cur_bpw = spi->bits_per_word; + sdd->cur_speed = spi->max_speed_hz; + sdd->cur_mode = spi->mode; + s3c64xx_spi_config(sdd); + } + + /* Map all the transfers if needed */ + if (s3c64xx_spi_map_mssg(sdd, msg)) { + dev_err(&spi->dev, + "Xfer: Unable to map message buffers!\n"); + status = -ENOMEM; + goto out; + } + + /* Configure feedback delay */ + writel(cs->fb_delay & 0x3, sdd->regs + S3C64XX_SPI_FB_CLK); + + list_for_each_entry(xfer, &msg->transfers, transfer_list) { + + unsigned long flags; + int use_dma; + + INIT_COMPLETION(sdd->xfer_completion); + + /* Only BPW and Speed may change across transfers */ + bpw = xfer->bits_per_word ? : spi->bits_per_word; + speed = xfer->speed_hz ? : spi->max_speed_hz; + + if (bpw != sdd->cur_bpw || speed != sdd->cur_speed) { + sdd->cur_bpw = bpw; + sdd->cur_speed = speed; + s3c64xx_spi_config(sdd); + } + + /* Polling method for xfers not bigger than FIFO capacity */ + if (xfer->len <= ((sci->fifo_lvl_mask >> 1) + 1)) + use_dma = 0; + else + use_dma = 1; + + spin_lock_irqsave(&sdd->lock, flags); + + /* Pending only which is to be done */ + sdd->state &= ~RXBUSY; + sdd->state &= ~TXBUSY; + + enable_datapath(sdd, spi, xfer, use_dma); + + /* Slave Select */ + enable_cs(sdd, spi); + + /* Start the signals */ + S3C64XX_SPI_ACT(sdd); + + spin_unlock_irqrestore(&sdd->lock, flags); + + status = wait_for_xfer(sdd, xfer, use_dma); + + /* Quiese the signals */ + S3C64XX_SPI_DEACT(sdd); + + if (status) { + dev_err(&spi->dev, "I/O Error: \ + rx-%d tx-%d res:rx-%c tx-%c len-%d\n", + xfer->rx_buf ? 1 : 0, xfer->tx_buf ? 1 : 0, + (sdd->state & RXBUSY) ? 'f' : 'p', + (sdd->state & TXBUSY) ? 'f' : 'p', + xfer->len); + + if (use_dma) { + if (xfer->tx_buf != NULL + && (sdd->state & TXBUSY)) + s3c2410_dma_ctrl(sdd->tx_dmach, + S3C2410_DMAOP_FLUSH); + if (xfer->rx_buf != NULL + && (sdd->state & RXBUSY)) + s3c2410_dma_ctrl(sdd->rx_dmach, + S3C2410_DMAOP_FLUSH); + } + + goto out; + } + + if (xfer->delay_usecs) + udelay(xfer->delay_usecs); + + if (xfer->cs_change) { + /* Hint that the next mssg is gonna be + for the same device */ + if (list_is_last(&xfer->transfer_list, + &msg->transfers)) + cs_toggle = 1; + else + disable_cs(sdd, spi); + } + + msg->actual_length += xfer->len; + + flush_fifo(sdd); + } + +out: + if (!cs_toggle || status) + disable_cs(sdd, spi); + else + sdd->tgl_spi = spi; + + s3c64xx_spi_unmap_mssg(sdd, msg); + + msg->status = status; + + if (msg->complete) + msg->complete(msg->context); +} + +static int acquire_dma(struct s3c64xx_spi_driver_data *sdd) +{ + if (s3c2410_dma_request(sdd->rx_dmach, + &s3c64xx_spi_dma_client, NULL) < 0) { + dev_err(&sdd->pdev->dev, "cannot get RxDMA\n"); + return 0; + } + s3c2410_dma_set_buffdone_fn(sdd->rx_dmach, s3c64xx_spi_dma_rxcb); + s3c2410_dma_devconfig(sdd->rx_dmach, S3C2410_DMASRC_HW, + sdd->sfr_start + S3C64XX_SPI_RX_DATA); + + if (s3c2410_dma_request(sdd->tx_dmach, + &s3c64xx_spi_dma_client, NULL) < 0) { + dev_err(&sdd->pdev->dev, "cannot get TxDMA\n"); + s3c2410_dma_free(sdd->rx_dmach, &s3c64xx_spi_dma_client); + return 0; + } + s3c2410_dma_set_buffdone_fn(sdd->tx_dmach, s3c64xx_spi_dma_txcb); + s3c2410_dma_devconfig(sdd->tx_dmach, S3C2410_DMASRC_MEM, + sdd->sfr_start + S3C64XX_SPI_TX_DATA); + + return 1; +} + +static void s3c64xx_spi_work(struct work_struct *work) +{ + struct s3c64xx_spi_driver_data *sdd = container_of(work, + struct s3c64xx_spi_driver_data, work); + unsigned long flags; + + /* Acquire DMA channels */ + while (!acquire_dma(sdd)) + msleep(10); + + spin_lock_irqsave(&sdd->lock, flags); + + while (!list_empty(&sdd->queue) + && !(sdd->state & SUSPND)) { + + struct spi_message *msg; + + msg = container_of(sdd->queue.next, struct spi_message, queue); + + list_del_init(&msg->queue); + + /* Set Xfer busy flag */ + sdd->state |= SPIBUSY; + + spin_unlock_irqrestore(&sdd->lock, flags); + + handle_msg(sdd, msg); + + spin_lock_irqsave(&sdd->lock, flags); + + sdd->state &= ~SPIBUSY; + } + + spin_unlock_irqrestore(&sdd->lock, flags); + + /* Free DMA channels */ + s3c2410_dma_free(sdd->tx_dmach, &s3c64xx_spi_dma_client); + s3c2410_dma_free(sdd->rx_dmach, &s3c64xx_spi_dma_client); +} + +static int s3c64xx_spi_transfer(struct spi_device *spi, + struct spi_message *msg) +{ + struct s3c64xx_spi_driver_data *sdd; + unsigned long flags; + + sdd = spi_master_get_devdata(spi->master); + + spin_lock_irqsave(&sdd->lock, flags); + + if (sdd->state & SUSPND) { + spin_unlock_irqrestore(&sdd->lock, flags); + return -ESHUTDOWN; + } + + msg->status = -EINPROGRESS; + msg->actual_length = 0; + + list_add_tail(&msg->queue, &sdd->queue); + + queue_work(sdd->workqueue, &sdd->work); + + spin_unlock_irqrestore(&sdd->lock, flags); + + return 0; +} + +/* + * Here we only check the validity of requested configuration + * and save the configuration in a local data-structure. + * The controller is actually configured only just before we + * get a message to transfer. + */ +static int s3c64xx_spi_setup(struct spi_device *spi) +{ + struct s3c64xx_spi_csinfo *cs = spi->controller_data; + struct s3c64xx_spi_driver_data *sdd; + struct s3c64xx_spi_cntrlr_info *sci; + struct spi_message *msg; + u32 psr, speed; + unsigned long flags; + int err = 0; + + if (cs == NULL || cs->set_level == NULL) { + dev_err(&spi->dev, "No CS for SPI(%d)\n", spi->chip_select); + return -ENODEV; + } + + sdd = spi_master_get_devdata(spi->master); + sci = sdd->cntrlr_info; + + spin_lock_irqsave(&sdd->lock, flags); + + list_for_each_entry(msg, &sdd->queue, queue) { + /* Is some mssg is already queued for this device */ + if (msg->spi == spi) { + dev_err(&spi->dev, + "setup: attempt while mssg in queue!\n"); + spin_unlock_irqrestore(&sdd->lock, flags); + return -EBUSY; + } + } + + if (sdd->state & SUSPND) { + spin_unlock_irqrestore(&sdd->lock, flags); + dev_err(&spi->dev, + "setup: SPI-%d not active!\n", spi->master->bus_num); + return -ESHUTDOWN; + } + + spin_unlock_irqrestore(&sdd->lock, flags); + + if (spi->bits_per_word != 8 + && spi->bits_per_word != 16 + && spi->bits_per_word != 32) { + dev_err(&spi->dev, "setup: %dbits/wrd not supported!\n", + spi->bits_per_word); + err = -EINVAL; + goto setup_exit; + } + + /* Check if we can provide the requested rate */ + speed = clk_get_rate(sci->src_clk) / 2 / (0 + 1); /* Max possible */ + + if (spi->max_speed_hz > speed) + spi->max_speed_hz = speed; + + psr = clk_get_rate(sci->src_clk) / 2 / spi->max_speed_hz - 1; + psr &= S3C64XX_SPI_PSR_MASK; + if (psr == S3C64XX_SPI_PSR_MASK) + psr--; + + speed = clk_get_rate(sci->src_clk) / 2 / (psr + 1); + if (spi->max_speed_hz < speed) { + if (psr+1 < S3C64XX_SPI_PSR_MASK) { + psr++; + } else { + err = -EINVAL; + goto setup_exit; + } + } + + speed = clk_get_rate(sci->src_clk) / 2 / (psr + 1); + if (spi->max_speed_hz >= speed) + spi->max_speed_hz = speed; + else + err = -EINVAL; + +setup_exit: + + /* setup() returns with device de-selected */ + disable_cs(sdd, spi); + + return err; +} + +static void s3c64xx_spi_hwinit(struct s3c64xx_spi_driver_data *sdd, int channel) +{ + struct s3c64xx_spi_cntrlr_info *sci = sdd->cntrlr_info; + void __iomem *regs = sdd->regs; + unsigned int val; + + sdd->cur_speed = 0; + + S3C64XX_SPI_DEACT(sdd); + + /* Disable Interrupts - we use Polling if not DMA mode */ + writel(0, regs + S3C64XX_SPI_INT_EN); + + writel(sci->src_clk_nr << S3C64XX_SPI_CLKSEL_SRCSHFT, + regs + S3C64XX_SPI_CLK_CFG); + writel(0, regs + S3C64XX_SPI_MODE_CFG); + writel(0, regs + S3C64XX_SPI_PACKET_CNT); + + /* Clear any irq pending bits */ + writel(readl(regs + S3C64XX_SPI_PENDING_CLR), + regs + S3C64XX_SPI_PENDING_CLR); + + writel(0, regs + S3C64XX_SPI_SWAP_CFG); + + val = readl(regs + S3C64XX_SPI_MODE_CFG); + val &= ~S3C64XX_SPI_MODE_4BURST; + val &= ~(S3C64XX_SPI_MAX_TRAILCNT << S3C64XX_SPI_TRAILCNT_OFF); + val |= (S3C64XX_SPI_TRAILCNT << S3C64XX_SPI_TRAILCNT_OFF); + writel(val, regs + S3C64XX_SPI_MODE_CFG); + + flush_fifo(sdd); +} + +static int __init s3c64xx_spi_probe(struct platform_device *pdev) +{ + struct resource *mem_res, *dmatx_res, *dmarx_res; + struct s3c64xx_spi_driver_data *sdd; + struct s3c64xx_spi_cntrlr_info *sci; + struct spi_master *master; + int ret; + + if (pdev->id < 0) { + dev_err(&pdev->dev, + "Invalid platform device id-%d\n", pdev->id); + return -ENODEV; + } + + if (pdev->dev.platform_data == NULL) { + dev_err(&pdev->dev, "platform_data missing!\n"); + return -ENODEV; + } + + /* Check for availability of necessary resource */ + + dmatx_res = platform_get_resource(pdev, IORESOURCE_DMA, 0); + if (dmatx_res == NULL) { + dev_err(&pdev->dev, "Unable to get SPI-Tx dma resource\n"); + return -ENXIO; + } + + dmarx_res = platform_get_resource(pdev, IORESOURCE_DMA, 1); + if (dmarx_res == NULL) { + dev_err(&pdev->dev, "Unable to get SPI-Rx dma resource\n"); + return -ENXIO; + } + + mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (mem_res == NULL) { + dev_err(&pdev->dev, "Unable to get SPI MEM resource\n"); + return -ENXIO; + } + + master = spi_alloc_master(&pdev->dev, + sizeof(struct s3c64xx_spi_driver_data)); + if (master == NULL) { + dev_err(&pdev->dev, "Unable to allocate SPI Master\n"); + return -ENOMEM; + } + + sci = pdev->dev.platform_data; + + platform_set_drvdata(pdev, master); + + sdd = spi_master_get_devdata(master); + sdd->master = master; + sdd->cntrlr_info = sci; + sdd->pdev = pdev; + sdd->sfr_start = mem_res->start; + sdd->tx_dmach = dmatx_res->start; + sdd->rx_dmach = dmarx_res->start; + + sdd->cur_bpw = 8; + + master->bus_num = pdev->id; + master->setup = s3c64xx_spi_setup; + master->transfer = s3c64xx_spi_transfer; + master->num_chipselect = sci->num_cs; + master->dma_alignment = 8; + /* the spi->mode bits understood by this driver: */ + master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH; + + if (request_mem_region(mem_res->start, + resource_size(mem_res), pdev->name) == NULL) { + dev_err(&pdev->dev, "Req mem region failed\n"); + ret = -ENXIO; + goto err0; + } + + sdd->regs = ioremap(mem_res->start, resource_size(mem_res)); + if (sdd->regs == NULL) { + dev_err(&pdev->dev, "Unable to remap IO\n"); + ret = -ENXIO; + goto err1; + } + + if (sci->cfg_gpio == NULL || sci->cfg_gpio(pdev)) { + dev_err(&pdev->dev, "Unable to config gpio\n"); + ret = -EBUSY; + goto err2; + } + + /* Setup clocks */ + sdd->clk = clk_get(&pdev->dev, "spi"); + if (IS_ERR(sdd->clk)) { + dev_err(&pdev->dev, "Unable to acquire clock 'spi'\n"); + ret = PTR_ERR(sdd->clk); + goto err3; + } + + if (clk_enable(sdd->clk)) { + dev_err(&pdev->dev, "Couldn't enable clock 'spi'\n"); + ret = -EBUSY; + goto err4; + } + + if (sci->src_clk_nr == S3C64XX_SPI_SRCCLK_PCLK) + sci->src_clk = sdd->clk; + else + sci->src_clk = clk_get(&pdev->dev, sci->src_clk_name); + if (IS_ERR(sci->src_clk)) { + dev_err(&pdev->dev, + "Unable to acquire clock '%s'\n", sci->src_clk_name); + ret = PTR_ERR(sci->src_clk); + goto err5; + } + + if (sci->src_clk != sdd->clk && clk_enable(sci->src_clk)) { + dev_err(&pdev->dev, "Couldn't enable clock '%s'\n", + sci->src_clk_name); + ret = -EBUSY; + goto err6; + } + + sdd->workqueue = create_singlethread_workqueue( + dev_name(master->dev.parent)); + if (sdd->workqueue == NULL) { + dev_err(&pdev->dev, "Unable to create workqueue\n"); + ret = -ENOMEM; + goto err7; + } + + /* Setup Deufult Mode */ + s3c64xx_spi_hwinit(sdd, pdev->id); + + spin_lock_init(&sdd->lock); + init_completion(&sdd->xfer_completion); + INIT_WORK(&sdd->work, s3c64xx_spi_work); + INIT_LIST_HEAD(&sdd->queue); + + if (spi_register_master(master)) { + dev_err(&pdev->dev, "cannot register SPI master\n"); + ret = -EBUSY; + goto err8; + } + + dev_dbg(&pdev->dev, "Samsung SoC SPI Driver loaded for Bus SPI-%d \ + with %d Slaves attached\n", + pdev->id, master->num_chipselect); + dev_dbg(&pdev->dev, "\tIOmem=[0x%x-0x%x]\ + \tDMA=[Rx-%d, Tx-%d]\n", + mem_res->end, mem_res->start, + sdd->rx_dmach, sdd->tx_dmach); + + return 0; + +err8: + destroy_workqueue(sdd->workqueue); +err7: + if (sci->src_clk != sdd->clk) + clk_disable(sci->src_clk); +err6: + if (sci->src_clk != sdd->clk) + clk_put(sci->src_clk); +err5: + clk_disable(sdd->clk); +err4: + clk_put(sdd->clk); +err3: +err2: + iounmap((void *) sdd->regs); +err1: + release_mem_region(mem_res->start, resource_size(mem_res)); +err0: + platform_set_drvdata(pdev, NULL); + spi_master_put(master); + + return ret; +} + +static int s3c64xx_spi_remove(struct platform_device *pdev) +{ + struct spi_master *master = spi_master_get(platform_get_drvdata(pdev)); + struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(master); + struct s3c64xx_spi_cntrlr_info *sci = sdd->cntrlr_info; + struct resource *mem_res; + unsigned long flags; + + spin_lock_irqsave(&sdd->lock, flags); + sdd->state |= SUSPND; + spin_unlock_irqrestore(&sdd->lock, flags); + + while (sdd->state & SPIBUSY) + msleep(10); + + spi_unregister_master(master); + + destroy_workqueue(sdd->workqueue); + + if (sci->src_clk != sdd->clk) + clk_disable(sci->src_clk); + + if (sci->src_clk != sdd->clk) + clk_put(sci->src_clk); + + clk_disable(sdd->clk); + clk_put(sdd->clk); + + iounmap((void *) sdd->regs); + + mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + release_mem_region(mem_res->start, resource_size(mem_res)); + + platform_set_drvdata(pdev, NULL); + spi_master_put(master); + + return 0; +} + +#ifdef CONFIG_PM +static int s3c64xx_spi_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct spi_master *master = spi_master_get(platform_get_drvdata(pdev)); + struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(master); + struct s3c64xx_spi_cntrlr_info *sci = sdd->cntrlr_info; + struct s3c64xx_spi_csinfo *cs; + unsigned long flags; + + spin_lock_irqsave(&sdd->lock, flags); + sdd->state |= SUSPND; + spin_unlock_irqrestore(&sdd->lock, flags); + + while (sdd->state & SPIBUSY) + msleep(10); + + /* Disable the clock */ + if (sci->src_clk != sdd->clk) + clk_disable(sci->src_clk); + + clk_disable(sdd->clk); + + sdd->cur_speed = 0; /* Output Clock is stopped */ + + return 0; +} + +static int s3c64xx_spi_resume(struct platform_device *pdev) +{ + struct spi_master *master = spi_master_get(platform_get_drvdata(pdev)); + struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(master); + struct s3c64xx_spi_cntrlr_info *sci = sdd->cntrlr_info; + unsigned long flags; + + sci->cfg_gpio(pdev); + + /* Enable the clock */ + if (sci->src_clk != sdd->clk) + clk_enable(sci->src_clk); + + clk_enable(sdd->clk); + + s3c64xx_spi_hwinit(sdd, pdev->id); + + spin_lock_irqsave(&sdd->lock, flags); + sdd->state &= ~SUSPND; + spin_unlock_irqrestore(&sdd->lock, flags); + + return 0; +} +#else +#define s3c64xx_spi_suspend NULL +#define s3c64xx_spi_resume NULL +#endif /* CONFIG_PM */ + +static struct platform_driver s3c64xx_spi_driver = { + .driver = { + .name = "s3c64xx-spi", + .owner = THIS_MODULE, + }, + .remove = s3c64xx_spi_remove, + .suspend = s3c64xx_spi_suspend, + .resume = s3c64xx_spi_resume, +}; +MODULE_ALIAS("platform:s3c64xx-spi"); + +static int __init s3c64xx_spi_init(void) +{ + return platform_driver_probe(&s3c64xx_spi_driver, s3c64xx_spi_probe); +} +module_init(s3c64xx_spi_init); + +static void __exit s3c64xx_spi_exit(void) +{ + platform_driver_unregister(&s3c64xx_spi_driver); +} +module_exit(s3c64xx_spi_exit); + +MODULE_AUTHOR("Jaswinder Singh <jassi.brar@samsung.com>"); +MODULE_DESCRIPTION("S3C64XX SPI Controller Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/spi/spi_sh_sci.c b/drivers/spi/spi_sh_sci.c index 7d36720eb982..a65c12ffa733 100644 --- a/drivers/spi/spi_sh_sci.c +++ b/drivers/spi/spi_sh_sci.c @@ -148,7 +148,7 @@ static int sh_sci_spi_probe(struct platform_device *dev) ret = -ENOENT; goto err1; } - sp->membase = ioremap(r->start, r->end - r->start + 1); + sp->membase = ioremap(r->start, resource_size(r)); if (!sp->membase) { ret = -ENXIO; goto err1; diff --git a/drivers/spi/spi_txx9.c b/drivers/spi/spi_txx9.c index 19f75627c3de..dfa024b633e1 100644 --- a/drivers/spi/spi_txx9.c +++ b/drivers/spi/spi_txx9.c @@ -375,12 +375,10 @@ static int __init txx9spi_probe(struct platform_device *dev) res = platform_get_resource(dev, IORESOURCE_MEM, 0); if (!res) goto exit_busy; - if (!devm_request_mem_region(&dev->dev, - res->start, res->end - res->start + 1, + if (!devm_request_mem_region(&dev->dev, res->start, resource_size(res), "spi_txx9")) goto exit_busy; - c->membase = devm_ioremap(&dev->dev, - res->start, res->end - res->start + 1); + c->membase = devm_ioremap(&dev->dev, res->start, resource_size(res)); if (!c->membase) goto exit_busy; diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c index 9c446e6003d5..ea1bec3c9a13 100644 --- a/drivers/spi/spidev.c +++ b/drivers/spi/spidev.c @@ -53,7 +53,7 @@ #define SPIDEV_MAJOR 153 /* assigned */ #define N_SPI_MINORS 32 /* ... up to 256 */ -static unsigned long minors[N_SPI_MINORS / BITS_PER_LONG]; +static DECLARE_BITMAP(minors, N_SPI_MINORS); /* Bit masks for spi_device.mode management. Note that incorrect @@ -558,7 +558,7 @@ static struct class *spidev_class; /*-------------------------------------------------------------------------*/ -static int spidev_probe(struct spi_device *spi) +static int __devinit spidev_probe(struct spi_device *spi) { struct spidev_data *spidev; int status; @@ -607,7 +607,7 @@ static int spidev_probe(struct spi_device *spi) return status; } -static int spidev_remove(struct spi_device *spi) +static int __devexit spidev_remove(struct spi_device *spi) { struct spidev_data *spidev = spi_get_drvdata(spi); @@ -629,7 +629,7 @@ static int spidev_remove(struct spi_device *spi) return 0; } -static struct spi_driver spidev_spi = { +static struct spi_driver spidev_spi_driver = { .driver = { .name = "spidev", .owner = THIS_MODULE, @@ -661,14 +661,14 @@ static int __init spidev_init(void) spidev_class = class_create(THIS_MODULE, "spidev"); if (IS_ERR(spidev_class)) { - unregister_chrdev(SPIDEV_MAJOR, spidev_spi.driver.name); + unregister_chrdev(SPIDEV_MAJOR, spidev_spi_driver.driver.name); return PTR_ERR(spidev_class); } - status = spi_register_driver(&spidev_spi); + status = spi_register_driver(&spidev_spi_driver); if (status < 0) { class_destroy(spidev_class); - unregister_chrdev(SPIDEV_MAJOR, spidev_spi.driver.name); + unregister_chrdev(SPIDEV_MAJOR, spidev_spi_driver.driver.name); } return status; } @@ -676,9 +676,9 @@ module_init(spidev_init); static void __exit spidev_exit(void) { - spi_unregister_driver(&spidev_spi); + spi_unregister_driver(&spidev_spi_driver); class_destroy(spidev_class); - unregister_chrdev(SPIDEV_MAJOR, spidev_spi.driver.name); + unregister_chrdev(SPIDEV_MAJOR, spidev_spi_driver.driver.name); } module_exit(spidev_exit); diff --git a/drivers/staging/iio/ring_sw.h b/drivers/staging/iio/ring_sw.h index f0b86f02cd80..fd677f008365 100644 --- a/drivers/staging/iio/ring_sw.h +++ b/drivers/staging/iio/ring_sw.h @@ -29,7 +29,6 @@ * driver requests - some may support multiple options */ -#include <linux/autoconf.h> #include "iio.h" #include "ring_generic.h" diff --git a/drivers/staging/panel/panel.c b/drivers/staging/panel/panel.c index 4ce399b6d237..f98a52448eae 100644 --- a/drivers/staging/panel/panel.c +++ b/drivers/staging/panel/panel.c @@ -55,7 +55,7 @@ #include <linux/list.h> #include <linux/notifier.h> #include <linux/reboot.h> -#include <linux/utsrelease.h> +#include <generated/utsrelease.h> #include <linux/io.h> #include <asm/uaccess.h> diff --git a/drivers/video/atafb.c b/drivers/video/atafb.c index 2051c9dc813b..b7687c55fe16 100644 --- a/drivers/video/atafb.c +++ b/drivers/video/atafb.c @@ -2245,9 +2245,6 @@ static int ext_setcolreg(unsigned int regno, unsigned int red, if (regno > 255) return 1; - if (regno > 255) - return 1; - switch (external_card_type) { case IS_VGA: OUTB(0x3c8, regno); diff --git a/drivers/video/backlight/adp5520_bl.c b/drivers/video/backlight/adp5520_bl.c index 4c10edecfb66..86d95c228adb 100644 --- a/drivers/video/backlight/adp5520_bl.c +++ b/drivers/video/backlight/adp5520_bl.c @@ -85,7 +85,7 @@ static int adp5520_bl_get_brightness(struct backlight_device *bl) return error ? data->current_brightness : reg_val; } -static struct backlight_ops adp5520_bl_ops = { +static const struct backlight_ops adp5520_bl_ops = { .update_status = adp5520_bl_update_status, .get_brightness = adp5520_bl_get_brightness, }; diff --git a/drivers/video/backlight/adx_bl.c b/drivers/video/backlight/adx_bl.c index 2c3bdfc620b7..d769b0bab21a 100644 --- a/drivers/video/backlight/adx_bl.c +++ b/drivers/video/backlight/adx_bl.c @@ -61,7 +61,7 @@ static int adx_backlight_check_fb(struct fb_info *fb) return 1; } -static struct backlight_ops adx_backlight_ops = { +static const struct backlight_ops adx_backlight_ops = { .options = 0, .update_status = adx_backlight_update_status, .get_brightness = adx_backlight_get_brightness, diff --git a/drivers/video/backlight/atmel-pwm-bl.c b/drivers/video/backlight/atmel-pwm-bl.c index 2cf7ba52f67c..f625ffc69ad3 100644 --- a/drivers/video/backlight/atmel-pwm-bl.c +++ b/drivers/video/backlight/atmel-pwm-bl.c @@ -113,7 +113,7 @@ static int atmel_pwm_bl_init_pwm(struct atmel_pwm_bl *pwmbl) return pwm_channel_enable(&pwmbl->pwmc); } -static struct backlight_ops atmel_pwm_bl_ops = { +static const struct backlight_ops atmel_pwm_bl_ops = { .get_brightness = atmel_pwm_bl_get_intensity, .update_status = atmel_pwm_bl_set_intensity, }; diff --git a/drivers/video/backlight/backlight.c b/drivers/video/backlight/backlight.c index 6615ac7fa60a..18829cf68b1b 100644 --- a/drivers/video/backlight/backlight.c +++ b/drivers/video/backlight/backlight.c @@ -269,7 +269,7 @@ EXPORT_SYMBOL(backlight_force_update); * ERR_PTR() or a pointer to the newly allocated device. */ struct backlight_device *backlight_device_register(const char *name, - struct device *parent, void *devdata, struct backlight_ops *ops) + struct device *parent, void *devdata, const struct backlight_ops *ops) { struct backlight_device *new_bd; int rc; diff --git a/drivers/video/backlight/corgi_lcd.c b/drivers/video/backlight/corgi_lcd.c index 96774949cd30..b4bcf8043797 100644 --- a/drivers/video/backlight/corgi_lcd.c +++ b/drivers/video/backlight/corgi_lcd.c @@ -451,7 +451,7 @@ void corgi_lcd_limit_intensity(int limit) } EXPORT_SYMBOL(corgi_lcd_limit_intensity); -static struct backlight_ops corgi_bl_ops = { +static const struct backlight_ops corgi_bl_ops = { .get_brightness = corgi_bl_get_intensity, .update_status = corgi_bl_update_status, }; diff --git a/drivers/video/backlight/cr_bllcd.c b/drivers/video/backlight/cr_bllcd.c index b9fe62b475c6..da86db4374a0 100644 --- a/drivers/video/backlight/cr_bllcd.c +++ b/drivers/video/backlight/cr_bllcd.c @@ -108,7 +108,7 @@ static int cr_backlight_get_intensity(struct backlight_device *bd) return intensity; } -static struct backlight_ops cr_backlight_ops = { +static const struct backlight_ops cr_backlight_ops = { .get_brightness = cr_backlight_get_intensity, .update_status = cr_backlight_set_intensity, }; @@ -201,7 +201,7 @@ static int cr_backlight_probe(struct platform_device *pdev) if (IS_ERR(ldp)) { backlight_device_unregister(bdp); pci_dev_put(lpc_dev); - return PTR_ERR(bdp); + return PTR_ERR(ldp); } pci_read_config_dword(lpc_dev, CRVML_REG_GPIOBAR, diff --git a/drivers/video/backlight/da903x_bl.c b/drivers/video/backlight/da903x_bl.c index f2d76dae1eb3..74cdc640173d 100644 --- a/drivers/video/backlight/da903x_bl.c +++ b/drivers/video/backlight/da903x_bl.c @@ -95,7 +95,7 @@ static int da903x_backlight_get_brightness(struct backlight_device *bl) return data->current_brightness; } -static struct backlight_ops da903x_backlight_ops = { +static const struct backlight_ops da903x_backlight_ops = { .update_status = da903x_backlight_update_status, .get_brightness = da903x_backlight_get_brightness, }; diff --git a/drivers/video/backlight/generic_bl.c b/drivers/video/backlight/generic_bl.c index 6d27f62fdcd0..e6d348e63596 100644 --- a/drivers/video/backlight/generic_bl.c +++ b/drivers/video/backlight/generic_bl.c @@ -70,7 +70,7 @@ void corgibl_limit_intensity(int limit) } EXPORT_SYMBOL(corgibl_limit_intensity); -static struct backlight_ops genericbl_ops = { +static const struct backlight_ops genericbl_ops = { .options = BL_CORE_SUSPENDRESUME, .get_brightness = genericbl_get_intensity, .update_status = genericbl_send_intensity, diff --git a/drivers/video/backlight/hp680_bl.c b/drivers/video/backlight/hp680_bl.c index 7fb4eefff80d..f7cc528d5be7 100644 --- a/drivers/video/backlight/hp680_bl.c +++ b/drivers/video/backlight/hp680_bl.c @@ -98,7 +98,7 @@ static int hp680bl_get_intensity(struct backlight_device *bd) return current_intensity; } -static struct backlight_ops hp680bl_ops = { +static const struct backlight_ops hp680bl_ops = { .get_brightness = hp680bl_get_intensity, .update_status = hp680bl_set_intensity, }; diff --git a/drivers/video/backlight/jornada720_bl.c b/drivers/video/backlight/jornada720_bl.c index 7aed2565c1bd..db9071fc5665 100644 --- a/drivers/video/backlight/jornada720_bl.c +++ b/drivers/video/backlight/jornada720_bl.c @@ -93,7 +93,7 @@ out: return ret; } -static struct backlight_ops jornada_bl_ops = { +static const struct backlight_ops jornada_bl_ops = { .get_brightness = jornada_bl_get_brightness, .update_status = jornada_bl_update_status, .options = BL_CORE_SUSPENDRESUME, diff --git a/drivers/video/backlight/kb3886_bl.c b/drivers/video/backlight/kb3886_bl.c index a38fda1742dd..939e7b830cf3 100644 --- a/drivers/video/backlight/kb3886_bl.c +++ b/drivers/video/backlight/kb3886_bl.c @@ -134,7 +134,7 @@ static int kb3886bl_get_intensity(struct backlight_device *bd) return kb3886bl_intensity; } -static struct backlight_ops kb3886bl_ops = { +static const struct backlight_ops kb3886bl_ops = { .get_brightness = kb3886bl_get_intensity, .update_status = kb3886bl_send_intensity, }; diff --git a/drivers/video/backlight/locomolcd.c b/drivers/video/backlight/locomolcd.c index 6b488b8a7eee..00a9591b0003 100644 --- a/drivers/video/backlight/locomolcd.c +++ b/drivers/video/backlight/locomolcd.c @@ -141,7 +141,7 @@ static int locomolcd_get_intensity(struct backlight_device *bd) return current_intensity; } -static struct backlight_ops locomobl_data = { +static const struct backlight_ops locomobl_data = { .get_brightness = locomolcd_get_intensity, .update_status = locomolcd_set_intensity, }; diff --git a/drivers/video/backlight/mbp_nvidia_bl.c b/drivers/video/backlight/mbp_nvidia_bl.c index 9edb8d7c295f..2e78b0784bdc 100644 --- a/drivers/video/backlight/mbp_nvidia_bl.c +++ b/drivers/video/backlight/mbp_nvidia_bl.c @@ -33,7 +33,7 @@ struct dmi_match_data { unsigned long iostart; unsigned long iolen; /* Backlight operations structure. */ - struct backlight_ops backlight_ops; + const struct backlight_ops backlight_ops; }; /* Module parameters. */ @@ -220,6 +220,24 @@ static const struct dmi_system_id __initdata mbp_device_table[] = { }, { .callback = mbp_dmi_match, + .ident = "MacBookPro 5,3", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro5,3"), + }, + .driver_data = (void *)&nvidia_chipset_data, + }, + { + .callback = mbp_dmi_match, + .ident = "MacBookPro 5,4", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro5,4"), + }, + .driver_data = (void *)&nvidia_chipset_data, + }, + { + .callback = mbp_dmi_match, .ident = "MacBookPro 5,5", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."), diff --git a/drivers/video/backlight/omap1_bl.c b/drivers/video/backlight/omap1_bl.c index 8693e5fcd2eb..409ca9643528 100644 --- a/drivers/video/backlight/omap1_bl.c +++ b/drivers/video/backlight/omap1_bl.c @@ -125,7 +125,7 @@ static int omapbl_get_intensity(struct backlight_device *dev) return bl->current_intensity; } -static struct backlight_ops omapbl_ops = { +static const struct backlight_ops omapbl_ops = { .get_brightness = omapbl_get_intensity, .update_status = omapbl_update_status, }; diff --git a/drivers/video/backlight/progear_bl.c b/drivers/video/backlight/progear_bl.c index 9edaf24fd82d..075786e05034 100644 --- a/drivers/video/backlight/progear_bl.c +++ b/drivers/video/backlight/progear_bl.c @@ -54,7 +54,7 @@ static int progearbl_get_intensity(struct backlight_device *bd) return intensity - HW_LEVEL_MIN; } -static struct backlight_ops progearbl_ops = { +static const struct backlight_ops progearbl_ops = { .get_brightness = progearbl_get_intensity, .update_status = progearbl_set_intensity, }; diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c index 887166267443..9d2ec2a1cce8 100644 --- a/drivers/video/backlight/pwm_bl.c +++ b/drivers/video/backlight/pwm_bl.c @@ -22,8 +22,10 @@ struct pwm_bl_data { struct pwm_device *pwm; + struct device *dev; unsigned int period; - int (*notify)(int brightness); + int (*notify)(struct device *, + int brightness); }; static int pwm_backlight_update_status(struct backlight_device *bl) @@ -39,7 +41,7 @@ static int pwm_backlight_update_status(struct backlight_device *bl) brightness = 0; if (pb->notify) - brightness = pb->notify(brightness); + brightness = pb->notify(pb->dev, brightness); if (brightness == 0) { pwm_config(pb->pwm, 0, pb->period); @@ -56,7 +58,7 @@ static int pwm_backlight_get_brightness(struct backlight_device *bl) return bl->props.brightness; } -static struct backlight_ops pwm_backlight_ops = { +static const struct backlight_ops pwm_backlight_ops = { .update_status = pwm_backlight_update_status, .get_brightness = pwm_backlight_get_brightness, }; @@ -88,6 +90,7 @@ static int pwm_backlight_probe(struct platform_device *pdev) pb->period = data->pwm_period_ns; pb->notify = data->notify; + pb->dev = &pdev->dev; pb->pwm = pwm_request(data->pwm_id, "backlight"); if (IS_ERR(pb->pwm)) { @@ -146,7 +149,7 @@ static int pwm_backlight_suspend(struct platform_device *pdev, struct pwm_bl_data *pb = dev_get_drvdata(&bl->dev); if (pb->notify) - pb->notify(0); + pb->notify(pb->dev, 0); pwm_config(pb->pwm, 0, pb->period); pwm_disable(pb->pwm); return 0; diff --git a/drivers/video/backlight/tosa_bl.c b/drivers/video/backlight/tosa_bl.c index 43edbada12d1..e14ce4d469f5 100644 --- a/drivers/video/backlight/tosa_bl.c +++ b/drivers/video/backlight/tosa_bl.c @@ -72,7 +72,7 @@ static int tosa_bl_get_brightness(struct backlight_device *dev) return props->brightness; } -static struct backlight_ops bl_ops = { +static const struct backlight_ops bl_ops = { .get_brightness = tosa_bl_get_brightness, .update_status = tosa_bl_update_status, }; diff --git a/drivers/video/backlight/wm831x_bl.c b/drivers/video/backlight/wm831x_bl.c index 467bdb7efb23..e32add37a203 100644 --- a/drivers/video/backlight/wm831x_bl.c +++ b/drivers/video/backlight/wm831x_bl.c @@ -112,7 +112,7 @@ static int wm831x_backlight_get_brightness(struct backlight_device *bl) return data->current_brightness; } -static struct backlight_ops wm831x_backlight_ops = { +static const struct backlight_ops wm831x_backlight_ops = { .options = BL_CORE_SUSPENDRESUME, .update_status = wm831x_backlight_update_status, .get_brightness = wm831x_backlight_get_brightness, diff --git a/drivers/video/via/viafbdev.c b/drivers/video/via/viafbdev.c index 10d8c4b4baeb..d8df17a7d5fc 100644 --- a/drivers/video/via/viafbdev.c +++ b/drivers/video/via/viafbdev.c @@ -680,7 +680,7 @@ static int viafb_ioctl(struct fb_info *info, u_int cmd, u_long arg) if (!viafb_gamma_table) return -ENOMEM; if (copy_from_user(viafb_gamma_table, argp, - sizeof(viafb_gamma_table))) { + 256 * sizeof(u32))) { kfree(viafb_gamma_table); return -EFAULT; } @@ -694,7 +694,7 @@ static int viafb_ioctl(struct fb_info *info, u_int cmd, u_long arg) return -ENOMEM; viafb_get_gamma_table(viafb_gamma_table); if (copy_to_user(argp, viafb_gamma_table, - sizeof(viafb_gamma_table))) { + 256 * sizeof(u32))) { kfree(viafb_gamma_table); return -EFAULT; } |