summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/tty/amiserial.c2
-rw-r--r--drivers/tty/cyclades.c2
-rw-r--r--drivers/tty/hvc/hvc_irq.c2
-rw-r--r--drivers/tty/hvc/hvcs.c2
-rw-r--r--drivers/tty/hvc/hvsi.c2
-rw-r--r--drivers/tty/isicom.c2
-rw-r--r--drivers/tty/serial/68328serial.c2
-rw-r--r--drivers/tty/serial/altera_jtaguart.c2
-rw-r--r--drivers/tty/serial/altera_uart.c2
-rw-r--r--drivers/tty/serial/bfin_sport_uart.c2
-rw-r--r--drivers/tty/serial/bfin_uart.c8
-rw-r--r--drivers/tty/serial/crisv10.c18
-rw-r--r--drivers/tty/serial/icom.c2
-rw-r--r--drivers/tty/serial/lantiq.c6
-rw-r--r--drivers/tty/serial/mcf.c2
-rw-r--r--drivers/tty/serial/mpc52xx_uart.c2
-rw-r--r--drivers/tty/serial/serial_ks8695.c8
-rw-r--r--drivers/tty/serial/sh-sci.c2
-rw-r--r--drivers/tty/serial/sn_console.c2
19 files changed, 35 insertions, 35 deletions
diff --git a/drivers/tty/amiserial.c b/drivers/tty/amiserial.c
index 6d43f550b549..b84c83456dcc 100644
--- a/drivers/tty/amiserial.c
+++ b/drivers/tty/amiserial.c
@@ -2017,7 +2017,7 @@ static int __init amiga_serial_probe(struct platform_device *pdev)
if (error)
goto fail_unregister;
- error = request_irq(IRQ_AMIGA_RBF, ser_rx_int, IRQF_DISABLED,
+ error = request_irq(IRQ_AMIGA_RBF, ser_rx_int, 0,
"serial RX", state);
if (error)
goto fail_free_irq;
diff --git a/drivers/tty/cyclades.c b/drivers/tty/cyclades.c
index 5beef494fc40..c9bf779481d8 100644
--- a/drivers/tty/cyclades.c
+++ b/drivers/tty/cyclades.c
@@ -3367,7 +3367,7 @@ static int __init cy_detect_isa(void)
/* allocate IRQ */
if (request_irq(cy_isa_irq, cyy_interrupt,
- IRQF_DISABLED, "Cyclom-Y", &cy_card[j])) {
+ 0, "Cyclom-Y", &cy_card[j])) {
printk(KERN_ERR "Cyclom-Y/ISA found at 0x%lx, but "
"could not allocate IRQ#%d.\n",
(unsigned long)cy_isa_address, cy_isa_irq);
diff --git a/drivers/tty/hvc/hvc_irq.c b/drivers/tty/hvc/hvc_irq.c
index 2623e177e8d6..c9adb0559f61 100644
--- a/drivers/tty/hvc/hvc_irq.c
+++ b/drivers/tty/hvc/hvc_irq.c
@@ -28,7 +28,7 @@ int notifier_add_irq(struct hvc_struct *hp, int irq)
hp->irq_requested = 0;
return 0;
}
- rc = request_irq(irq, hvc_handle_interrupt, IRQF_DISABLED,
+ rc = request_irq(irq, hvc_handle_interrupt, 0,
"hvc_console", hp);
if (!rc)
hp->irq_requested = 1;
diff --git a/drivers/tty/hvc/hvcs.c b/drivers/tty/hvc/hvcs.c
index e523773a5480..55882b5930a6 100644
--- a/drivers/tty/hvc/hvcs.c
+++ b/drivers/tty/hvc/hvcs.c
@@ -1057,7 +1057,7 @@ static int hvcs_enable_device(struct hvcs_struct *hvcsd, uint32_t unit_address,
* the conn was registered and now.
*/
if (!(rc = request_irq(irq, &hvcs_handle_interrupt,
- IRQF_DISABLED, "ibmhvcs", hvcsd))) {
+ 0, "ibmhvcs", hvcsd))) {
/*
* It is possible the vty-server was removed after the irq was
* requested but before we have time to enable interrupts.
diff --git a/drivers/tty/hvc/hvsi.c b/drivers/tty/hvc/hvsi.c
index c94e2f5853d8..cdfa3e02d627 100644
--- a/drivers/tty/hvc/hvsi.c
+++ b/drivers/tty/hvc/hvsi.c
@@ -1105,7 +1105,7 @@ static int __init hvsi_init(void)
struct hvsi_struct *hp = &hvsi_ports[i];
int ret = 1;
- ret = request_irq(hp->virq, hvsi_interrupt, IRQF_DISABLED, "hvsi", hp);
+ ret = request_irq(hp->virq, hvsi_interrupt, 0, "hvsi", hp);
if (ret)
printk(KERN_ERR "HVSI: couldn't reserve irq 0x%x (error %i)\n",
hp->virq, ret);
diff --git a/drivers/tty/isicom.c b/drivers/tty/isicom.c
index db1cf9c328d8..e5c295ab5dec 100644
--- a/drivers/tty/isicom.c
+++ b/drivers/tty/isicom.c
@@ -1598,7 +1598,7 @@ static int __devinit isicom_probe(struct pci_dev *pdev,
}
retval = request_irq(board->irq, isicom_interrupt,
- IRQF_SHARED | IRQF_DISABLED, ISICOM_NAME, board);
+ IRQF_SHARED, ISICOM_NAME, board);
if (retval < 0) {
dev_err(&pdev->dev, "Could not install handler at Irq %d. "
"Card%d will be disabled.\n", board->irq, index + 1);
diff --git a/drivers/tty/serial/68328serial.c b/drivers/tty/serial/68328serial.c
index f54923186969..a88ef9782a4f 100644
--- a/drivers/tty/serial/68328serial.c
+++ b/drivers/tty/serial/68328serial.c
@@ -1306,7 +1306,7 @@ rs68328_init(void)
if (request_irq(uart_irqs[i],
rs_interrupt,
- IRQF_DISABLED,
+ 0,
"M68328_UART", info))
panic("Unable to attach 68328 serial interrupt\n");
}
diff --git a/drivers/tty/serial/altera_jtaguart.c b/drivers/tty/serial/altera_jtaguart.c
index 60e049b041a7..00a73ecb2dfb 100644
--- a/drivers/tty/serial/altera_jtaguart.c
+++ b/drivers/tty/serial/altera_jtaguart.c
@@ -218,7 +218,7 @@ static int altera_jtaguart_startup(struct uart_port *port)
unsigned long flags;
int ret;
- ret = request_irq(port->irq, altera_jtaguart_interrupt, IRQF_DISABLED,
+ ret = request_irq(port->irq, altera_jtaguart_interrupt, 0,
DRV_NAME, port);
if (ret) {
pr_err(DRV_NAME ": unable to attach Altera JTAG UART %d "
diff --git a/drivers/tty/serial/altera_uart.c b/drivers/tty/serial/altera_uart.c
index 50bc5a5ac653..d902558ccfd2 100644
--- a/drivers/tty/serial/altera_uart.c
+++ b/drivers/tty/serial/altera_uart.c
@@ -315,7 +315,7 @@ static int altera_uart_startup(struct uart_port *port)
return 0;
}
- ret = request_irq(port->irq, altera_uart_interrupt, IRQF_DISABLED,
+ ret = request_irq(port->irq, altera_uart_interrupt, 0,
DRV_NAME, port);
if (ret) {
pr_err(DRV_NAME ": unable to attach Altera UART %d "
diff --git a/drivers/tty/serial/bfin_sport_uart.c b/drivers/tty/serial/bfin_sport_uart.c
index 891d194ae754..ee101c0d358f 100644
--- a/drivers/tty/serial/bfin_sport_uart.c
+++ b/drivers/tty/serial/bfin_sport_uart.c
@@ -294,7 +294,7 @@ static int sport_startup(struct uart_port *port)
if (request_irq(gpio_to_irq(up->cts_pin),
sport_mctrl_cts_int,
IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING |
- IRQF_DISABLED, "BFIN_SPORT_UART_CTS", up)) {
+ 0, "BFIN_SPORT_UART_CTS", up)) {
up->cts_pin = -1;
dev_info(port->dev, "Unable to attach BlackFin UART over SPORT CTS interrupt. So, disable it.\n");
}
diff --git a/drivers/tty/serial/bfin_uart.c b/drivers/tty/serial/bfin_uart.c
index c7e592df42c0..66afb98b77b5 100644
--- a/drivers/tty/serial/bfin_uart.c
+++ b/drivers/tty/serial/bfin_uart.c
@@ -667,14 +667,14 @@ static int bfin_serial_startup(struct uart_port *port)
kgdboc_break_enabled = 0;
else {
# endif
- if (request_irq(uart->rx_irq, bfin_serial_rx_int, IRQF_DISABLED,
+ if (request_irq(uart->rx_irq, bfin_serial_rx_int, 0,
"BFIN_UART_RX", uart)) {
printk(KERN_NOTICE "Unable to attach BlackFin UART RX interrupt\n");
return -EBUSY;
}
if (request_irq
- (uart->tx_irq, bfin_serial_tx_int, IRQF_DISABLED,
+ (uart->tx_irq, bfin_serial_tx_int, 0,
"BFIN_UART_TX", uart)) {
printk(KERN_NOTICE "Unable to attach BlackFin UART TX interrupt\n");
free_irq(uart->rx_irq, uart);
@@ -734,7 +734,7 @@ static int bfin_serial_startup(struct uart_port *port)
if (request_irq(gpio_to_irq(uart->cts_pin),
bfin_serial_mctrl_cts_int,
IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING |
- IRQF_DISABLED, "BFIN_UART_CTS", uart)) {
+ 0, "BFIN_UART_CTS", uart)) {
uart->cts_pin = -1;
pr_info("Unable to attach BlackFin UART CTS interrupt. So, disable it.\n");
}
@@ -745,7 +745,7 @@ static int bfin_serial_startup(struct uart_port *port)
#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS
if (uart->cts_pin >= 0 && request_irq(uart->status_irq,
bfin_serial_mctrl_cts_int,
- IRQF_DISABLED, "BFIN_UART_MODEM_STATUS", uart)) {
+ 0, "BFIN_UART_MODEM_STATUS", uart)) {
uart->cts_pin = -1;
pr_info("Unable to attach BlackFin UART Modem Status interrupt.\n");
}
diff --git a/drivers/tty/serial/crisv10.c b/drivers/tty/serial/crisv10.c
index a931524629f9..b7435043f2fe 100644
--- a/drivers/tty/serial/crisv10.c
+++ b/drivers/tty/serial/crisv10.c
@@ -258,7 +258,7 @@ static struct e100_serial rs_table[] = {
.dma_out_enabled = 1,
.dma_out_nbr = SER0_TX_DMA_NBR,
.dma_out_irq_nbr = SER0_DMA_TX_IRQ_NBR,
- .dma_out_irq_flags = IRQF_DISABLED,
+ .dma_out_irq_flags = 0,
.dma_out_irq_description = "serial 0 dma tr",
#else
.dma_out_enabled = 0,
@@ -271,7 +271,7 @@ static struct e100_serial rs_table[] = {
.dma_in_enabled = 1,
.dma_in_nbr = SER0_RX_DMA_NBR,
.dma_in_irq_nbr = SER0_DMA_RX_IRQ_NBR,
- .dma_in_irq_flags = IRQF_DISABLED,
+ .dma_in_irq_flags = 0,
.dma_in_irq_description = "serial 0 dma rec",
#else
.dma_in_enabled = 0,
@@ -313,7 +313,7 @@ static struct e100_serial rs_table[] = {
.dma_out_enabled = 1,
.dma_out_nbr = SER1_TX_DMA_NBR,
.dma_out_irq_nbr = SER1_DMA_TX_IRQ_NBR,
- .dma_out_irq_flags = IRQF_DISABLED,
+ .dma_out_irq_flags = 0,
.dma_out_irq_description = "serial 1 dma tr",
#else
.dma_out_enabled = 0,
@@ -326,7 +326,7 @@ static struct e100_serial rs_table[] = {
.dma_in_enabled = 1,
.dma_in_nbr = SER1_RX_DMA_NBR,
.dma_in_irq_nbr = SER1_DMA_RX_IRQ_NBR,
- .dma_in_irq_flags = IRQF_DISABLED,
+ .dma_in_irq_flags = 0,
.dma_in_irq_description = "serial 1 dma rec",
#else
.dma_in_enabled = 0,
@@ -369,7 +369,7 @@ static struct e100_serial rs_table[] = {
.dma_out_enabled = 1,
.dma_out_nbr = SER2_TX_DMA_NBR,
.dma_out_irq_nbr = SER2_DMA_TX_IRQ_NBR,
- .dma_out_irq_flags = IRQF_DISABLED,
+ .dma_out_irq_flags = 0,
.dma_out_irq_description = "serial 2 dma tr",
#else
.dma_out_enabled = 0,
@@ -382,7 +382,7 @@ static struct e100_serial rs_table[] = {
.dma_in_enabled = 1,
.dma_in_nbr = SER2_RX_DMA_NBR,
.dma_in_irq_nbr = SER2_DMA_RX_IRQ_NBR,
- .dma_in_irq_flags = IRQF_DISABLED,
+ .dma_in_irq_flags = 0,
.dma_in_irq_description = "serial 2 dma rec",
#else
.dma_in_enabled = 0,
@@ -423,7 +423,7 @@ static struct e100_serial rs_table[] = {
.dma_out_enabled = 1,
.dma_out_nbr = SER3_TX_DMA_NBR,
.dma_out_irq_nbr = SER3_DMA_TX_IRQ_NBR,
- .dma_out_irq_flags = IRQF_DISABLED,
+ .dma_out_irq_flags = 0,
.dma_out_irq_description = "serial 3 dma tr",
#else
.dma_out_enabled = 0,
@@ -436,7 +436,7 @@ static struct e100_serial rs_table[] = {
.dma_in_enabled = 1,
.dma_in_nbr = SER3_RX_DMA_NBR,
.dma_in_irq_nbr = SER3_DMA_RX_IRQ_NBR,
- .dma_in_irq_flags = IRQF_DISABLED,
+ .dma_in_irq_flags = 0,
.dma_in_irq_description = "serial 3 dma rec",
#else
.dma_in_enabled = 0,
@@ -4558,7 +4558,7 @@ static int __init rs_init(void)
/* hook the irq's for DMA channel 6 and 7, serial output and input, and some more... */
if (request_irq(SERIAL_IRQ_NBR, ser_interrupt,
- IRQF_SHARED | IRQF_DISABLED, "serial ", driver))
+ IRQF_SHARED, "serial ", driver))
panic("%s: Failed to request irq8", __func__);
#endif
diff --git a/drivers/tty/serial/icom.c b/drivers/tty/serial/icom.c
index 8a869e58f6d7..d55709a7a75a 100644
--- a/drivers/tty/serial/icom.c
+++ b/drivers/tty/serial/icom.c
@@ -1554,7 +1554,7 @@ static int __devinit icom_probe(struct pci_dev *dev,
/* save off irq and request irq line */
if ( (retval = request_irq(dev->irq, icom_interrupt,
- IRQF_DISABLED | IRQF_SHARED, ICOM_DRIVER_NAME,
+ IRQF_SHARED, ICOM_DRIVER_NAME,
(void *) icom_adapter))) {
goto probe_exit2;
}
diff --git a/drivers/tty/serial/lantiq.c b/drivers/tty/serial/lantiq.c
index 58cf279ed879..9e2d42bfa557 100644
--- a/drivers/tty/serial/lantiq.c
+++ b/drivers/tty/serial/lantiq.c
@@ -338,21 +338,21 @@ lqasc_startup(struct uart_port *port)
ASCCON_ROEN, port->membase + LTQ_ASC_CON);
retval = request_irq(ltq_port->tx_irq, lqasc_tx_int,
- IRQF_DISABLED, "asc_tx", port);
+ 0, "asc_tx", port);
if (retval) {
pr_err("failed to request lqasc_tx_int\n");
return retval;
}
retval = request_irq(ltq_port->rx_irq, lqasc_rx_int,
- IRQF_DISABLED, "asc_rx", port);
+ 0, "asc_rx", port);
if (retval) {
pr_err("failed to request lqasc_rx_int\n");
goto err1;
}
retval = request_irq(ltq_port->err_irq, lqasc_err_int,
- IRQF_DISABLED, "asc_err", port);
+ 0, "asc_err", port);
if (retval) {
pr_err("failed to request lqasc_err_int\n");
goto err2;
diff --git a/drivers/tty/serial/mcf.c b/drivers/tty/serial/mcf.c
index 3394b7cc1722..9afca093d6ec 100644
--- a/drivers/tty/serial/mcf.c
+++ b/drivers/tty/serial/mcf.c
@@ -380,7 +380,7 @@ static void mcf_config_port(struct uart_port *port, int flags)
/* Clear mask, so no surprise interrupts. */
writeb(0, port->membase + MCFUART_UIMR);
- if (request_irq(port->irq, mcf_interrupt, IRQF_DISABLED, "UART", port))
+ if (request_irq(port->irq, mcf_interrupt, 0, "UART", port))
printk(KERN_ERR "MCF: unable to attach ColdFire UART %d "
"interrupt vector=%d\n", port->line, port->irq);
}
diff --git a/drivers/tty/serial/mpc52xx_uart.c b/drivers/tty/serial/mpc52xx_uart.c
index c395520d77cf..1093a88a1fe3 100644
--- a/drivers/tty/serial/mpc52xx_uart.c
+++ b/drivers/tty/serial/mpc52xx_uart.c
@@ -274,7 +274,7 @@ static unsigned int mpc5200b_psc_set_baudrate(struct uart_port *port,
static void mpc52xx_psc_get_irq(struct uart_port *port, struct device_node *np)
{
- port->irqflags = IRQF_DISABLED;
+ port->irqflags = 0;
port->irq = irq_of_parse_and_map(np, 0);
}
diff --git a/drivers/tty/serial/serial_ks8695.c b/drivers/tty/serial/serial_ks8695.c
index 5551f7afe740..7c13639c597e 100644
--- a/drivers/tty/serial/serial_ks8695.c
+++ b/drivers/tty/serial/serial_ks8695.c
@@ -337,19 +337,19 @@ static int ks8695uart_startup(struct uart_port *port)
/*
* Allocate the IRQ
*/
- retval = request_irq(KS8695_IRQ_UART_TX, ks8695uart_tx_chars, IRQF_DISABLED, "UART TX", port);
+ retval = request_irq(KS8695_IRQ_UART_TX, ks8695uart_tx_chars, 0, "UART TX", port);
if (retval)
goto err_tx;
- retval = request_irq(KS8695_IRQ_UART_RX, ks8695uart_rx_chars, IRQF_DISABLED, "UART RX", port);
+ retval = request_irq(KS8695_IRQ_UART_RX, ks8695uart_rx_chars, 0, "UART RX", port);
if (retval)
goto err_rx;
- retval = request_irq(KS8695_IRQ_UART_LINE_STATUS, ks8695uart_rx_chars, IRQF_DISABLED, "UART LineStatus", port);
+ retval = request_irq(KS8695_IRQ_UART_LINE_STATUS, ks8695uart_rx_chars, 0, "UART LineStatus", port);
if (retval)
goto err_ls;
- retval = request_irq(KS8695_IRQ_UART_MODEM_STATUS, ks8695uart_modem_status, IRQF_DISABLED, "UART ModemStatus", port);
+ retval = request_irq(KS8695_IRQ_UART_MODEM_STATUS, ks8695uart_modem_status, 0, "UART ModemStatus", port);
if (retval)
goto err_ms;
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index 2ec57b2fb278..ca1a4c385d40 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -1961,7 +1961,7 @@ static int __devinit sci_init_single(struct platform_device *dev,
* For the muxed case there's nothing more to do.
*/
port->irq = p->irqs[SCIx_RXI_IRQ];
- port->irqflags = IRQF_DISABLED;
+ port->irqflags = 0;
port->serial_in = sci_serial_in;
port->serial_out = sci_serial_out;
diff --git a/drivers/tty/serial/sn_console.c b/drivers/tty/serial/sn_console.c
index 7320507b0d85..238c7df73ef5 100644
--- a/drivers/tty/serial/sn_console.c
+++ b/drivers/tty/serial/sn_console.c
@@ -738,7 +738,7 @@ static void __init sn_sal_switch_to_interrupts(struct sn_cons_port *port)
DPRINTF("sn_console: switching to interrupt driven console\n");
if (request_irq(SGI_UART_VECTOR, sn_sal_interrupt,
- IRQF_DISABLED | IRQF_SHARED,
+ IRQF_SHARED,
"SAL console driver", port) >= 0) {
spin_lock_irqsave(&port->sc_port.lock, flags);
port->sc_port.irq = SGI_UART_VECTOR;
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-18 15:03:11 +0100