diff options
Diffstat (limited to 'drivers')
23 files changed, 948 insertions, 724 deletions
diff --git a/drivers/pinctrl/mvebu/pinctrl-mvebu.c b/drivers/pinctrl/mvebu/pinctrl-mvebu.c index bb7ddb1bc89f..e78c041c3c73 100644 --- a/drivers/pinctrl/mvebu/pinctrl-mvebu.c +++ b/drivers/pinctrl/mvebu/pinctrl-mvebu.c @@ -191,18 +191,27 @@ static int mvebu_pinconf_group_get(struct pinctrl_dev *pctldev, } static int mvebu_pinconf_group_set(struct pinctrl_dev *pctldev, - unsigned gid, unsigned long config) + unsigned gid, unsigned long *configs, + unsigned num_configs) { struct mvebu_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev); struct mvebu_pinctrl_group *grp = &pctl->groups[gid]; + int i, ret; if (!grp->ctrl) return -EINVAL; - if (grp->ctrl->mpp_set) - return grp->ctrl->mpp_set(grp->ctrl, config); + for (i = 0; i < num_configs; i++) { + if (grp->ctrl->mpp_set) + ret = grp->ctrl->mpp_set(grp->ctrl, configs[i]); + else + ret = mvebu_common_mpp_set(pctl, grp, configs[i]); - return mvebu_common_mpp_set(pctl, grp, config); + if (ret) + return ret; + } /* for each config */ + + return 0; } static void mvebu_pinconf_group_dbg_show(struct pinctrl_dev *pctldev, @@ -303,6 +312,7 @@ static int mvebu_pinmux_enable(struct pinctrl_dev *pctldev, unsigned fid, struct mvebu_pinctrl_group *grp = &pctl->groups[gid]; struct mvebu_mpp_ctrl_setting *setting; int ret; + unsigned long config; setting = mvebu_pinctrl_find_setting_by_name(pctl, grp, func->name); @@ -313,7 +323,8 @@ static int mvebu_pinmux_enable(struct pinctrl_dev *pctldev, unsigned fid, return -EINVAL; } - ret = mvebu_pinconf_group_set(pctldev, grp->gid, setting->val); + config = setting->val; + ret = mvebu_pinconf_group_set(pctldev, grp->gid, &config, 1); if (ret) { dev_err(pctl->dev, "cannot set group %s to %s\n", func->groups[gid], func->name); @@ -329,6 +340,7 @@ static int mvebu_pinmux_gpio_request_enable(struct pinctrl_dev *pctldev, struct mvebu_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev); struct mvebu_pinctrl_group *grp; struct mvebu_mpp_ctrl_setting *setting; + unsigned long config; grp = mvebu_pinctrl_find_group_by_pid(pctl, offset); if (!grp) @@ -341,7 +353,9 @@ static int mvebu_pinmux_gpio_request_enable(struct pinctrl_dev *pctldev, if (!setting) return -ENOTSUPP; - return mvebu_pinconf_group_set(pctldev, grp->gid, setting->val); + config = setting->val; + + return mvebu_pinconf_group_set(pctldev, grp->gid, &config, 1); } static int mvebu_pinmux_gpio_set_direction(struct pinctrl_dev *pctldev, diff --git a/drivers/pinctrl/pinconf.c b/drivers/pinctrl/pinconf.c index 8da2d6db228c..a138965c01cb 100644 --- a/drivers/pinctrl/pinconf.c +++ b/drivers/pinctrl/pinconf.c @@ -158,7 +158,7 @@ int pinconf_apply_setting(struct pinctrl_setting const *setting) { struct pinctrl_dev *pctldev = setting->pctldev; const struct pinconf_ops *ops = pctldev->desc->confops; - int i, ret; + int ret; if (!ops) { dev_err(pctldev->dev, "missing confops\n"); @@ -171,17 +171,15 @@ int pinconf_apply_setting(struct pinctrl_setting const *setting) dev_err(pctldev->dev, "missing pin_config_set op\n"); return -EINVAL; } - for (i = 0; i < setting->data.configs.num_configs; i++) { - ret = ops->pin_config_set(pctldev, - setting->data.configs.group_or_pin, - setting->data.configs.configs[i]); - if (ret < 0) { - dev_err(pctldev->dev, - "pin_config_set op failed for pin %d config %08lx\n", - setting->data.configs.group_or_pin, - setting->data.configs.configs[i]); - return ret; - } + ret = ops->pin_config_set(pctldev, + setting->data.configs.group_or_pin, + setting->data.configs.configs, + setting->data.configs.num_configs); + if (ret < 0) { + dev_err(pctldev->dev, + "pin_config_set op failed for pin %d\n", + setting->data.configs.group_or_pin); + return ret; } break; case PIN_MAP_TYPE_CONFIGS_GROUP: @@ -190,17 +188,15 @@ int pinconf_apply_setting(struct pinctrl_setting const *setting) "missing pin_config_group_set op\n"); return -EINVAL; } - for (i = 0; i < setting->data.configs.num_configs; i++) { - ret = ops->pin_config_group_set(pctldev, - setting->data.configs.group_or_pin, - setting->data.configs.configs[i]); - if (ret < 0) { - dev_err(pctldev->dev, - "pin_config_group_set op failed for group %d config %08lx\n", - setting->data.configs.group_or_pin, - setting->data.configs.configs[i]); - return ret; - } + ret = ops->pin_config_group_set(pctldev, + setting->data.configs.group_or_pin, + setting->data.configs.configs, + setting->data.configs.num_configs); + if (ret < 0) { + dev_err(pctldev->dev, + "pin_config_group_set op failed for group %d\n", + setting->data.configs.group_or_pin); + return ret; } break; default: diff --git a/drivers/pinctrl/pinctrl-abx500.c b/drivers/pinctrl/pinctrl-abx500.c index 1d3f988c2c8b..8f25df06bc6b 100644 --- a/drivers/pinctrl/pinctrl-abx500.c +++ b/drivers/pinctrl/pinctrl-abx500.c @@ -1041,98 +1041,115 @@ static int abx500_pin_config_get(struct pinctrl_dev *pctldev, static int abx500_pin_config_set(struct pinctrl_dev *pctldev, unsigned pin, - unsigned long config) + unsigned long *configs, + unsigned num_configs) { struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev); struct gpio_chip *chip = &pct->chip; unsigned offset; int ret = -EINVAL; - enum pin_config_param param = pinconf_to_config_param(config); - enum pin_config_param argument = pinconf_to_config_argument(config); - - dev_dbg(chip->dev, "pin %d [%#lx]: %s %s\n", - pin, config, (param == PIN_CONFIG_OUTPUT) ? "output " : "input", - (param == PIN_CONFIG_OUTPUT) ? (argument ? "high" : "low") : - (argument ? "pull up" : "pull down")); - - /* on ABx500, there is no GPIO0, so adjust the offset */ - offset = pin - 1; - - switch (param) { - case PIN_CONFIG_BIAS_DISABLE: - ret = abx500_gpio_direction_input(chip, offset); - if (ret < 0) - goto out; - /* - * Some chips only support pull down, while some actually - * support both pull up and pull down. Such chips have - * a "pullud" range specified for the pins that support - * both features. If the pin is not within that range, we - * fall back to the old bit set that only support pull down. - */ - if (abx500_pullud_supported(chip, pin)) - ret = abx500_set_pull_updown(pct, - pin, - ABX500_GPIO_PULL_NONE); - else - /* Chip only supports pull down */ - ret = abx500_gpio_set_bits(chip, AB8500_GPIO_PUD1_REG, - offset, ABX500_GPIO_PULL_NONE); - break; - - case PIN_CONFIG_BIAS_PULL_DOWN: - ret = abx500_gpio_direction_input(chip, offset); - if (ret < 0) - goto out; - /* - * if argument = 1 set the pull down - * else clear the pull down - * Some chips only support pull down, while some actually - * support both pull up and pull down. Such chips have - * a "pullud" range specified for the pins that support - * both features. If the pin is not within that range, we - * fall back to the old bit set that only support pull down. - */ - if (abx500_pullud_supported(chip, pin)) - ret = abx500_set_pull_updown(pct, - pin, - argument ? ABX500_GPIO_PULL_DOWN : ABX500_GPIO_PULL_NONE); - else - /* Chip only supports pull down */ - ret = abx500_gpio_set_bits(chip, AB8500_GPIO_PUD1_REG, - offset, - argument ? ABX500_GPIO_PULL_DOWN : ABX500_GPIO_PULL_NONE); - break; - - case PIN_CONFIG_BIAS_PULL_UP: - ret = abx500_gpio_direction_input(chip, offset); - if (ret < 0) - goto out; - /* - * if argument = 1 set the pull up - * else clear the pull up - */ - ret = abx500_gpio_direction_input(chip, offset); - /* - * Some chips only support pull down, while some actually - * support both pull up and pull down. Such chips have - * a "pullud" range specified for the pins that support - * both features. If the pin is not within that range, do - * nothing - */ - if (abx500_pullud_supported(chip, pin)) - ret = abx500_set_pull_updown(pct, - pin, - argument ? ABX500_GPIO_PULL_UP : ABX500_GPIO_PULL_NONE); - break; + int i; + enum pin_config_param param; + enum pin_config_param argument; + + for (i = 0; i < num_configs; i++) { + param = pinconf_to_config_param(configs[i]); + argument = pinconf_to_config_argument(configs[i]); + + dev_dbg(chip->dev, "pin %d [%#lx]: %s %s\n", + pin, configs[i], + (param == PIN_CONFIG_OUTPUT) ? "output " : "input", + (param == PIN_CONFIG_OUTPUT) ? + (argument ? "high" : "low") : + (argument ? "pull up" : "pull down")); + + /* on ABx500, there is no GPIO0, so adjust the offset */ + offset = pin - 1; + + switch (param) { + case PIN_CONFIG_BIAS_DISABLE: + ret = abx500_gpio_direction_input(chip, offset); + if (ret < 0) + goto out; + /* + * Some chips only support pull down, while some + * actually support both pull up and pull down. Such + * chips have a "pullud" range specified for the pins + * that support both features. If the pin is not + * within that range, we fall back to the old bit set + * that only support pull down. + */ + if (abx500_pullud_supported(chip, pin)) + ret = abx500_set_pull_updown(pct, + pin, + ABX500_GPIO_PULL_NONE); + else + /* Chip only supports pull down */ + ret = abx500_gpio_set_bits(chip, + AB8500_GPIO_PUD1_REG, offset, + ABX500_GPIO_PULL_NONE); + break; - case PIN_CONFIG_OUTPUT: - ret = abx500_gpio_direction_output(chip, offset, argument); - break; + case PIN_CONFIG_BIAS_PULL_DOWN: + ret = abx500_gpio_direction_input(chip, offset); + if (ret < 0) + goto out; + /* + * if argument = 1 set the pull down + * else clear the pull down + * Some chips only support pull down, while some + * actually support both pull up and pull down. Such + * chips have a "pullud" range specified for the pins + * that support both features. If the pin is not + * within that range, we fall back to the old bit set + * that only support pull down. + */ + if (abx500_pullud_supported(chip, pin)) + ret = abx500_set_pull_updown(pct, + pin, + argument ? ABX500_GPIO_PULL_DOWN : + ABX500_GPIO_PULL_NONE); + else + /* Chip only supports pull down */ + ret = abx500_gpio_set_bits(chip, + AB8500_GPIO_PUD1_REG, + offset, + argument ? ABX500_GPIO_PULL_DOWN : + ABX500_GPIO_PULL_NONE); + break; - default: - dev_err(chip->dev, "illegal configuration requested\n"); - } + case PIN_CONFIG_BIAS_PULL_UP: + ret = abx500_gpio_direction_input(chip, offset); + if (ret < 0) + goto out; + /* + * if argument = 1 set the pull up + * else clear the pull up + */ + ret = abx500_gpio_direction_input(chip, offset); + /* + * Some chips only support pull down, while some + * actually support both pull up and pull down. Such + * chips have a "pullud" range specified for the pins + * that support both features. If the pin is not + * within that range, do nothing + */ + if (abx500_pullud_supported(chip, pin)) + ret = abx500_set_pull_updown(pct, + pin, + argument ? ABX500_GPIO_PULL_UP : + ABX500_GPIO_PULL_NONE); + break; + + case PIN_CONFIG_OUTPUT: + ret = abx500_gpio_direction_output(chip, offset, + argument); + break; + + default: + dev_err(chip->dev, "illegal configuration requested\n"); + } + } /* for each config */ out: if (ret < 0) dev_err(pct->dev, "%s failed (%d)\n", __func__, ret); diff --git a/drivers/pinctrl/pinctrl-at91.c b/drivers/pinctrl/pinctrl-at91.c index 7cce066c71b6..9685ff6c8b01 100644 --- a/drivers/pinctrl/pinctrl-at91.c +++ b/drivers/pinctrl/pinctrl-at91.c @@ -736,30 +736,40 @@ static int at91_pinconf_get(struct pinctrl_dev *pctldev, } static int at91_pinconf_set(struct pinctrl_dev *pctldev, - unsigned pin_id, unsigned long config) + unsigned pin_id, unsigned long *configs, + unsigned num_configs) { struct at91_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); unsigned mask; void __iomem *pio; - - dev_dbg(info->dev, "%s:%d, pin_id=%d, config=0x%lx", __func__, __LINE__, pin_id, config); - pio = pin_to_controller(info, pin_to_bank(pin_id)); - mask = pin_to_mask(pin_id % MAX_NB_GPIO_PER_BANK); - - if (config & PULL_UP && config & PULL_DOWN) - return -EINVAL; - - at91_mux_set_pullup(pio, mask, config & PULL_UP); - at91_mux_set_multidrive(pio, mask, config & MULTI_DRIVE); - if (info->ops->set_deglitch) - info->ops->set_deglitch(pio, mask, config & DEGLITCH); - if (info->ops->set_debounce) - info->ops->set_debounce(pio, mask, config & DEBOUNCE, + int i; + unsigned long config; + + for (i = 0; i < num_configs; i++) { + config = configs[i]; + + dev_dbg(info->dev, + "%s:%d, pin_id=%d, config=0x%lx", + __func__, __LINE__, pin_id, config); + pio = pin_to_controller(info, pin_to_bank(pin_id)); + mask = pin_to_mask(pin_id % MAX_NB_GPIO_PER_BANK); + + if (config & PULL_UP && config & PULL_DOWN) + return -EINVAL; + + at91_mux_set_pullup(pio, mask, config & PULL_UP); + at91_mux_set_multidrive(pio, mask, config & MULTI_DRIVE); + if (info->ops->set_deglitch) + info->ops->set_deglitch(pio, mask, config & DEGLITCH); + if (info->ops->set_debounce) + info->ops->set_debounce(pio, mask, config & DEBOUNCE, (config & DEBOUNCE_VAL) >> DEBOUNCE_VAL_SHIFT); - if (info->ops->set_pulldown) - info->ops->set_pulldown(pio, mask, config & PULL_DOWN); - if (info->ops->disable_schmitt_trig && config & DIS_SCHMIT) - info->ops->disable_schmitt_trig(pio, mask); + if (info->ops->set_pulldown) + info->ops->set_pulldown(pio, mask, config & PULL_DOWN); + if (info->ops->disable_schmitt_trig && config & DIS_SCHMIT) + info->ops->disable_schmitt_trig(pio, mask); + + } /* for each config */ return 0; } diff --git a/drivers/pinctrl/pinctrl-bcm2835.c b/drivers/pinctrl/pinctrl-bcm2835.c index a1c88b30f71f..c05c1ef2cc3c 100644 --- a/drivers/pinctrl/pinctrl-bcm2835.c +++ b/drivers/pinctrl/pinctrl-bcm2835.c @@ -893,28 +893,35 @@ static int bcm2835_pinconf_get(struct pinctrl_dev *pctldev, } static int bcm2835_pinconf_set(struct pinctrl_dev *pctldev, - unsigned pin, unsigned long config) + unsigned pin, unsigned long *configs, + unsigned num_configs) { struct bcm2835_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev); - enum bcm2835_pinconf_param param = BCM2835_PINCONF_UNPACK_PARAM(config); - u16 arg = BCM2835_PINCONF_UNPACK_ARG(config); + enum bcm2835_pinconf_param param; + u16 arg; u32 off, bit; + int i; - if (param != BCM2835_PINCONF_PARAM_PULL) - return -EINVAL; - - off = GPIO_REG_OFFSET(pin); - bit = GPIO_REG_SHIFT(pin); - - bcm2835_gpio_wr(pc, GPPUD, arg & 3); - /* - * Docs say to wait 150 cycles, but not of what. We assume a - * 1 MHz clock here, which is pretty slow... - */ - udelay(150); - bcm2835_gpio_wr(pc, GPPUDCLK0 + (off * 4), BIT(bit)); - udelay(150); - bcm2835_gpio_wr(pc, GPPUDCLK0 + (off * 4), 0); + for (i = 0; i < num_configs; i++) { + param = BCM2835_PINCONF_UNPACK_PARAM(configs[i]); + arg = BCM2835_PINCONF_UNPACK_ARG(configs[i]); + + if (param != BCM2835_PINCONF_PARAM_PULL) + return -EINVAL; + + off = GPIO_REG_OFFSET(pin); + bit = GPIO_REG_SHIFT(pin); + + bcm2835_gpio_wr(pc, GPPUD, arg & 3); + /* + * Docs say to wait 150 cycles, but not of what. We assume a + * 1 MHz clock here, which is pretty slow... + */ + udelay(150); + bcm2835_gpio_wr(pc, GPPUDCLK0 + (off * 4), BIT(bit)); + udelay(150); + bcm2835_gpio_wr(pc, GPPUDCLK0 + (off * 4), 0); + } /* for each config */ return 0; } diff --git a/drivers/pinctrl/pinctrl-exynos5440.c b/drivers/pinctrl/pinctrl-exynos5440.c index 3b283fd898ff..544d469c5a7b 100644 --- a/drivers/pinctrl/pinctrl-exynos5440.c +++ b/drivers/pinctrl/pinctrl-exynos5440.c @@ -401,64 +401,71 @@ static const struct pinmux_ops exynos5440_pinmux_ops = { /* set the pin config settings for a specified pin */ static int exynos5440_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin, - unsigned long config) + unsigned long *configs, + unsigned num_configs) { struct exynos5440_pinctrl_priv_data *priv; void __iomem *base; - enum pincfg_type cfg_type = PINCFG_UNPACK_TYPE(config); - u32 cfg_value = PINCFG_UNPACK_VALUE(config); + enum pincfg_type cfg_type; + u32 cfg_value; u32 data; + int i; priv = pinctrl_dev_get_drvdata(pctldev); base = priv->reg_base; - switch (cfg_type) { - case PINCFG_TYPE_PUD: - /* first set pull enable/disable bit */ - data = readl(base + GPIO_PE); - data &= ~(1 << pin); - if (cfg_value) - data |= (1 << pin); - writel(data, base + GPIO_PE); - - /* then set pull up/down bit */ - data = readl(base + GPIO_PS); - data &= ~(1 << pin); - if (cfg_value == 2) - data |= (1 << pin); - writel(data, base + GPIO_PS); - break; - - case PINCFG_TYPE_DRV: - /* set the first bit of the drive strength */ - data = readl(base + GPIO_DS0); - data &= ~(1 << pin); - data |= ((cfg_value & 1) << pin); - writel(data, base + GPIO_DS0); - cfg_value >>= 1; - - /* set the second bit of the driver strength */ - data = readl(base + GPIO_DS1); - data &= ~(1 << pin); - data |= ((cfg_value & 1) << pin); - writel(data, base + GPIO_DS1); - break; - case PINCFG_TYPE_SKEW_RATE: - data = readl(base + GPIO_SR); - data &= ~(1 << pin); - data |= ((cfg_value & 1) << pin); - writel(data, base + GPIO_SR); - break; - case PINCFG_TYPE_INPUT_TYPE: - data = readl(base + GPIO_TYPE); - data &= ~(1 << pin); - data |= ((cfg_value & 1) << pin); - writel(data, base + GPIO_TYPE); - break; - default: - WARN_ON(1); - return -EINVAL; - } + for (i = 0; i < num_configs; i++) { + cfg_type = PINCFG_UNPACK_TYPE(configs[i]); + cfg_value = PINCFG_UNPACK_VALUE(configs[i]); + + switch (cfg_type) { + case PINCFG_TYPE_PUD: + /* first set pull enable/disable bit */ + data = readl(base + GPIO_PE); + data &= ~(1 << pin); + if (cfg_value) + data |= (1 << pin); + writel(data, base + GPIO_PE); + + /* then set pull up/down bit */ + data = readl(base + GPIO_PS); + data &= ~(1 << pin); + if (cfg_value == 2) + data |= (1 << pin); + writel(data, base + GPIO_PS); + break; + + case PINCFG_TYPE_DRV: + /* set the first bit of the drive strength */ + data = readl(base + GPIO_DS0); + data &= ~(1 << pin); + data |= ((cfg_value & 1) << pin); + writel(data, base + GPIO_DS0); + cfg_value >>= 1; + + /* set the second bit of the driver strength */ + data = readl(base + GPIO_DS1); + data &= ~(1 << pin); + data |= ((cfg_value & 1) << pin); + writel(data, base + GPIO_DS1); + break; + case PINCFG_TYPE_SKEW_RATE: + data = readl(base + GPIO_SR); + data &= ~(1 << pin); + data |= ((cfg_value & 1) << pin); + writel(data, base + GPIO_SR); + break; + case PINCFG_TYPE_INPUT_TYPE: + data = readl(base + GPIO_TYPE); + data &= ~(1 << pin); + data |= ((cfg_value & 1) << pin); + writel(data, base + GPIO_TYPE); + break; + default: + WARN_ON(1); + return -EINVAL; + } + } /* for each config */ return 0; } @@ -510,7 +517,8 @@ static int exynos5440_pinconf_get(struct pinctrl_dev *pctldev, unsigned int pin, /* set the pin config settings for a specified pin group */ static int exynos5440_pinconf_group_set(struct pinctrl_dev *pctldev, - unsigned group, unsigned long config) + unsigned group, unsigned long *configs, + unsigned num_configs) { struct exynos5440_pinctrl_priv_data *priv; const unsigned int *pins; @@ -520,7 +528,8 @@ static int exynos5440_pinconf_group_set(struct pinctrl_dev *pctldev, pins = priv->pin_groups[group].pins; for (cnt = 0; cnt < priv->pin_groups[group].num_pins; cnt++) - exynos5440_pinconf_set(pctldev, pins[cnt], config); + exynos5440_pinconf_set(pctldev, pins[cnt], configs, + num_configs); return 0; } diff --git a/drivers/pinctrl/pinctrl-falcon.c b/drivers/pinctrl/pinctrl-falcon.c index 4e731f24df85..2e62689b5e9f 100644 --- a/drivers/pinctrl/pinctrl-falcon.c +++ b/drivers/pinctrl/pinctrl-falcon.c @@ -238,7 +238,8 @@ static int falcon_pinconf_group_get(struct pinctrl_dev *pctrldev, } static int falcon_pinconf_group_set(struct pinctrl_dev *pctrldev, - unsigned group, unsigned long config) + unsigned group, unsigned long *configs, + unsigned num_configs) { return -ENOTSUPP; } @@ -279,39 +280,47 @@ static int falcon_pinconf_get(struct pinctrl_dev *pctrldev, } static int falcon_pinconf_set(struct pinctrl_dev *pctrldev, - unsigned pin, unsigned long config) + unsigned pin, unsigned long *configs, + unsigned num_configs) { - enum ltq_pinconf_param param = LTQ_PINCONF_UNPACK_PARAM(config); - int arg = LTQ_PINCONF_UNPACK_ARG(config); + enum ltq_pinconf_param param; + int arg; struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev); void __iomem *mem = info->membase[PORT(pin)]; u32 reg; + int i; - switch (param) { - case LTQ_PINCONF_PARAM_DRIVE_CURRENT: - reg = LTQ_PADC_DCC; - break; - - case LTQ_PINCONF_PARAM_SLEW_RATE: - reg = LTQ_PADC_SRC; - break; - - case LTQ_PINCONF_PARAM_PULL: - if (arg == 1) - reg = LTQ_PADC_PDEN; - else - reg = LTQ_PADC_PUEN; - break; + for (i = 0; i < num_configs; i++) { + param = LTQ_PINCONF_UNPACK_PARAM(configs[i]); + arg = LTQ_PINCONF_UNPACK_ARG(configs[i]); + + switch (param) { + case LTQ_PINCONF_PARAM_DRIVE_CURRENT: + reg = LTQ_PADC_DCC; + break; + + case LTQ_PINCONF_PARAM_SLEW_RATE: + reg = LTQ_PADC_SRC; + break; + + case LTQ_PINCONF_PARAM_PULL: + if (arg == 1) + reg = LTQ_PADC_PDEN; + else + reg = LTQ_PADC_PUEN; + break; + + default: + pr_err("%s: Invalid config param %04x\n", + pinctrl_dev_get_name(pctrldev), param); + return -ENOTSUPP; + } - default: - pr_err("%s: Invalid config param %04x\n", - pinctrl_dev_get_name(pctrldev), param); - return -ENOTSUPP; - } + pad_w32(mem, BIT(PORT_PIN(pin)), reg); + if (!(pad_r32(mem, reg) & BIT(PORT_PIN(pin)))) + return -ENOTSUPP; + } /* for each config */ - pad_w32(mem, BIT(PORT_PIN(pin)), reg); - if (!(pad_r32(mem, reg) & BIT(PORT_PIN(pin)))) - return -ENOTSUPP; return 0; } diff --git a/drivers/pinctrl/pinctrl-imx.c b/drivers/pinctrl/pinctrl-imx.c index 360249301315..d78dd813bff9 100644 --- a/drivers/pinctrl/pinctrl-imx.c +++ b/drivers/pinctrl/pinctrl-imx.c @@ -323,11 +323,13 @@ static int imx_pinconf_get(struct pinctrl_dev *pctldev, } static int imx_pinconf_set(struct pinctrl_dev *pctldev, - unsigned pin_id, unsigned long config) + unsigned pin_id, unsigned long *configs, + unsigned num_configs) { struct imx_pinctrl *ipctl = pinctrl_dev_get_drvdata(pctldev); const struct imx_pinctrl_soc_info *info = ipctl->info; const struct imx_pin_reg *pin_reg = &info->pin_regs[pin_id]; + int i; if (!(info->flags & ZERO_OFFSET_VALID) && !pin_reg->conf_reg) { dev_err(info->dev, "Pin(%s) does not support config function\n", @@ -338,17 +340,19 @@ static int imx_pinconf_set(struct pinctrl_dev *pctldev, dev_dbg(ipctl->dev, "pinconf set pin %s\n", info->pins[pin_id].name); - if (info->flags & SHARE_MUX_CONF_REG) { - u32 reg; - reg = readl(ipctl->base + pin_reg->conf_reg); - reg &= ~0xffff; - reg |= config; - writel(reg, ipctl->base + pin_reg->conf_reg); - } else { - writel(config, ipctl->base + pin_reg->conf_reg); - } - dev_dbg(ipctl->dev, "write: offset 0x%x val 0x%lx\n", - pin_reg->conf_reg, config); + for (i = 0; i < num_configs; i++) { + if (info->flags & SHARE_MUX_CONF_REG) { + u32 reg; + reg = readl(ipctl->base + pin_reg->conf_reg); + reg &= ~0xffff; + reg |= configs[i]; + writel(reg, ipctl->base + pin_reg->conf_reg); + } else { + writel(configs[i], ipctl->base + pin_reg->conf_reg); + } + dev_dbg(ipctl->dev, "write: offset 0x%x val 0x%lx\n", + pin_reg->conf_reg, configs[i]); + } /* for each config */ return 0; } diff --git a/drivers/pinctrl/pinctrl-mxs.c b/drivers/pinctrl/pinctrl-mxs.c index f5d56436ba7f..40c76f26998c 100644 --- a/drivers/pinctrl/pinctrl-mxs.c +++ b/drivers/pinctrl/pinctrl-mxs.c @@ -233,7 +233,8 @@ static int mxs_pinconf_get(struct pinctrl_dev *pctldev, } static int mxs_pinconf_set(struct pinctrl_dev *pctldev, - unsigned pin, unsigned long config) + unsigned pin, unsigned long *configs, + unsigned num_configs) { return -ENOTSUPP; } @@ -249,7 +250,8 @@ static int mxs_pinconf_group_get(struct pinctrl_dev *pctldev, } static int mxs_pinconf_group_set(struct pinctrl_dev *pctldev, - unsigned group, unsigned long config) + unsigned group, unsigned long *configs, + unsigned num_configs) { struct mxs_pinctrl_data *d = pinctrl_dev_get_drvdata(pctldev); struct mxs_group *g = &d->soc->groups[group]; @@ -257,49 +259,56 @@ static int mxs_pinconf_group_set(struct pinctrl_dev *pctldev, u8 ma, vol, pull, bank, shift; u16 pin; u32 i; + int n; + unsigned long config; - ma = CONFIG_TO_MA(config); - vol = CONFIG_TO_VOL(config); - pull = CONFIG_TO_PULL(config); - - for (i = 0; i < g->npins; i++) { - bank = PINID_TO_BANK(g->pins[i]); - pin = PINID_TO_PIN(g->pins[i]); - - /* drive */ - reg = d->base + d->soc->regs->drive; - reg += bank * 0x40 + pin / 8 * 0x10; - - /* mA */ - if (config & MA_PRESENT) { - shift = pin % 8 * 4; - writel(0x3 << shift, reg + CLR); - writel(ma << shift, reg + SET); - } - - /* vol */ - if (config & VOL_PRESENT) { - shift = pin % 8 * 4 + 2; - if (vol) - writel(1 << shift, reg + SET); - else - writel(1 << shift, reg + CLR); + for (n = 0; n < num_configs; n++) { + config = configs[n]; + + ma = CONFIG_TO_MA(config); + vol = CONFIG_TO_VOL(config); + pull = CONFIG_TO_PULL(config); + + for (i = 0; i < g->npins; i++) { + bank = PINID_TO_BANK(g->pins[i]); + pin = PINID_TO_PIN(g->pins[i]); + + /* drive */ + reg = d->base + d->soc->regs->drive; + reg += bank * 0x40 + pin / 8 * 0x10; + + /* mA */ + if (config & MA_PRESENT) { + shift = pin % 8 * 4; + writel(0x3 << shift, reg + CLR); + writel(ma << shift, reg + SET); + } + + /* vol */ + if (config & VOL_PRESENT) { + shift = pin % 8 * 4 + 2; + if (vol) + writel(1 << shift, reg + SET); + else + writel(1 << shift, reg + CLR); + } + + /* pull */ + if (config & PULL_PRESENT) { + reg = d->base + d->soc->regs->pull; + reg += bank * 0x10; + shift = pin; + if (pull) + writel(1 << shift, reg + SET); + else + writel(1 << shift, reg + CLR); + } } - /* pull */ - if (config & PULL_PRESENT) { - reg = d->base + d->soc->regs->pull; - reg += bank * 0x10; - shift = pin; - if (pull) - writel(1 << shift, reg + SET); - else - writel(1 << shift, reg + CLR); - } - } + /* cache the config value for mxs_pinconf_group_get() */ + g->config = config; - /* cache the config value for mxs_pinconf_group_get() */ - g->config = config; + } /* for each config */ return 0; } diff --git a/drivers/pinctrl/pinctrl-nomadik.c b/drivers/pinctrl/pinctrl-nomadik.c index f7c7279d081a..d7c3ae300fa7 100644 --- a/drivers/pinctrl/pinctrl-nomadik.c +++ b/drivers/pinctrl/pinctrl-nomadik.c @@ -1695,7 +1695,7 @@ static int nmk_pin_config_get(struct pinctrl_dev *pctldev, unsigned pin, } static int nmk_pin_config_set(struct pinctrl_dev *pctldev, unsigned pin, - unsigned long config) + unsigned long *configs, unsigned num_configs) { static const char *pullnames[] = { [NMK_GPIO_PULL_NONE] = "none", @@ -1712,20 +1712,9 @@ static int nmk_pin_config_set(struct pinctrl_dev *pctldev, unsigned pin, struct pinctrl_gpio_range *range; struct gpio_chip *chip; unsigned bit; - - /* - * The pin config contains pin number and altfunction fields, here - * we just ignore that part. It's being handled by the framework and - * pinmux callback respectively. - */ - pin_cfg_t cfg = (pin_cfg_t) config; - int pull = PIN_PULL(cfg); - int slpm = PIN_SLPM(cfg); - int output = PIN_DIR(cfg); - int val = PIN_VAL(cfg); - bool lowemi = PIN_LOWEMI(cfg); - bool gpiomode = PIN_GPIOMODE(cfg); - bool sleep = PIN_SLEEPMODE(cfg); + pin_cfg_t cfg; + int pull, slpm, output, val, i; + bool lowemi, gpiomode, sleep; range = nmk_match_gpio_range(pctldev, pin); if (!range) { @@ -1740,54 +1729,74 @@ static int nmk_pin_config_set(struct pinctrl_dev *pctldev, unsigned pin, chip = range->gc; nmk_chip = container_of(chip, struct nmk_gpio_chip, chip); - if (sleep) { - int slpm_pull = PIN_SLPM_PULL(cfg); - int slpm_output = PIN_SLPM_DIR(cfg); - int slpm_val = PIN_SLPM_VAL(cfg); - - /* All pins go into GPIO mode at sleep */ - gpiomode = true; - + for (i = 0; i < num_configs; i++) { /* - * The SLPM_* values are normal values + 1 to allow zero to - * mean "same as normal". + * The pin config contains pin number and altfunction fields, + * here we just ignore that part. It's being handled by the + * framework and pinmux callback respectively. */ - if (slpm_pull) - pull = slpm_pull - 1; - if (slpm_output) - output = slpm_output - 1; - if (slpm_val) - val = slpm_val - 1; - - dev_dbg(nmk_chip->chip.dev, "pin %d: sleep pull %s, dir %s, val %s\n", - pin, - slpm_pull ? pullnames[pull] : "same", - slpm_output ? (output ? "output" : "input") : "same", - slpm_val ? (val ? "high" : "low") : "same"); - } + cfg = (pin_cfg_t) configs[i]; + pull = PIN_PULL(cfg); + slpm = PIN_SLPM(cfg); + output = PIN_DIR(cfg); + val = PIN_VAL(cfg); + lowemi = PIN_LOWEMI(cfg); + gpiomode = PIN_GPIOMODE(cfg); + sleep = PIN_SLEEPMODE(cfg); + + if (sleep) { + int slpm_pull = PIN_SLPM_PULL(cfg); + int slpm_output = PIN_SLPM_DIR(cfg); + int slpm_val = PIN_SLPM_VAL(cfg); + + /* All pins go into GPIO mode at sleep */ + gpiomode = true; + + /* + * The SLPM_* values are normal values + 1 to allow zero + * to mean "same as normal". + */ + if (slpm_pull) + pull = slpm_pull - 1; + if (slpm_output) + output = slpm_output - 1; + if (slpm_val) + val = slpm_val - 1; + + dev_dbg(nmk_chip->chip.dev, + "pin %d: sleep pull %s, dir %s, val %s\n", + pin, + slpm_pull ? pullnames[pull] : "same", + slpm_output ? (output ? "output" : "input") + : "same", + slpm_val ? (val ? "high" : "low") : "same"); + } - dev_dbg(nmk_chip->chip.dev, "pin %d [%#lx]: pull %s, slpm %s (%s%s), lowemi %s\n", - pin, cfg, pullnames[pull], slpmnames[slpm], - output ? "output " : "input", - output ? (val ? "high" : "low") : "", - lowemi ? "on" : "off"); + dev_dbg(nmk_chip->chip.dev, + "pin %d [%#lx]: pull %s, slpm %s (%s%s), lowemi %s\n", + pin, cfg, pullnames[pull], slpmnames[slpm], + output ? "output " : "input", + output ? (val ? "high" : "low") : "", + lowemi ? "on" : "off"); - clk_enable(nmk_chip->clk); - bit = pin % NMK_GPIO_PER_CHIP; - if (gpiomode) - /* No glitch when going to GPIO mode */ - __nmk_gpio_set_mode(nmk_chip, bit, NMK_GPIO_ALT_GPIO); - if (output) - __nmk_gpio_make_output(nmk_chip, bit, val); - else { - __nmk_gpio_make_input(nmk_chip, bit); - __nmk_gpio_set_pull(nmk_chip, bit, pull); - } - /* TODO: isn't this only applicable on output pins? */ - __nmk_gpio_set_lowemi(nmk_chip, bit, lowemi); + clk_enable(nmk_chip->clk); + bit = pin % NMK_GPIO_PER_CHIP; + if (gpiomode) + /* No glitch when going to GPIO mode */ + __nmk_gpio_set_mode(nmk_chip, bit, NMK_GPIO_ALT_GPIO); + if (output) + __nmk_gpio_make_output(nmk_chip, bit, val); + else { + __nmk_gpio_make_input(nmk_chip, bit); + __nmk_gpio_set_pull(nmk_chip, bit, pull); + } + /* TODO: isn't this only applicable on output pins? */ + __nmk_gpio_set_lowemi(nmk_chip, bit, lowemi); + + __nmk_gpio_set_slpm(nmk_chip, bit, slpm); + clk_disable(nmk_chip->clk); + } /* for each config */ - __nmk_gpio_set_slpm(nmk_chip, bit, slpm); - clk_disable(nmk_chip->clk); return 0; } diff --git a/drivers/pinctrl/pinctrl-palmas.c b/drivers/pinctrl/pinctrl-palmas.c index 9550c33b2544..82638fac3cfa 100644 --- a/drivers/pinctrl/pinctrl-palmas.c +++ b/drivers/pinctrl/pinctrl-palmas.c @@ -854,17 +854,19 @@ static int palmas_pinconf_get(struct pinctrl_dev *pctldev, } static int palmas_pinconf_set(struct pinctrl_dev *pctldev, - unsigned pin, unsigned long config) + unsigned pin, unsigned long *configs, + unsigned num_configs) { struct palmas_pctrl_chip_info *pci = pinctrl_dev_get_drvdata(pctldev); - enum pin_config_param param = pinconf_to_config_param(config); - u16 param_val = pinconf_to_config_argument(config); + enum pin_config_param param; + u16 param_val; const struct palmas_pingroup *g; const struct palmas_pin_info *opt; int ret; int base, add, mask; int rval; int group_nr; + int i; for (group_nr = 0; group_nr < pci->num_pin_groups; ++group_nr) { if (pci->pin_groups[group_nr].pins[0] == pin) @@ -885,70 +887,77 @@ static int palmas_pinconf_set(struct pinctrl_dev *pctldev, return -ENOTSUPP; } - switch (param) { - case PIN_CONFIG_BIAS_PULL_PIN_DEFAULT: - return 0; - case PIN_CONFIG_BIAS_DISABLE: - case PIN_CONFIG_BIAS_PULL_UP: - case PIN_CONFIG_BIAS_PULL_DOWN: - if (!opt->pud_info) { - dev_err(pci->dev, - "PULL control not supported for pin %s\n", - g->name); - return -ENOTSUPP; - } - base = opt->pud_info->pullup_dn_reg_base; - add = opt->pud_info->pullup_dn_reg_add; - mask = opt->pud_info->pullup_dn_mask; - - if (param == PIN_CONFIG_BIAS_DISABLE) - rval = opt->pud_info->normal_val; - else if (param == PIN_CONFIG_BIAS_PULL_UP) - rval = opt->pud_info->pull_up_val; - else - rval = opt->pud_info->pull_dn_val; + for (i = 0; i < num_configs; i++) { + param = pinconf_to_config_param(configs[i]); + param_val = pinconf_to_config_argument(configs[i]); + + switch (param) { + case PIN_CONFIG_BIAS_PULL_PIN_DEFAULT: + return 0; + case PIN_CONFIG_BIAS_DISABLE: + case PIN_CONFIG_BIAS_PULL_UP: + case PIN_CONFIG_BIAS_PULL_DOWN: + if (!opt->pud_info) { + dev_err(pci->dev, + "PULL control not supported for pin %s\n", + g->name); + return -ENOTSUPP; + } + base = opt->pud_info->pullup_dn_reg_base; + add = opt->pud_info->pullup_dn_reg_add; + mask = opt->pud_info->pullup_dn_mask; + + if (param == PIN_CONFIG_BIAS_DISABLE) + rval = opt->pud_info->normal_val; + else if (param == PIN_CONFIG_BIAS_PULL_UP) + rval = opt->pud_info->pull_up_val; + else + rval = opt->pud_info->pull_dn_val; + + if (rval < 0) { + dev_err(pci->dev, + "PULL control not supported for pin %s\n", + g->name); + return -ENOTSUPP; + } + break; - if (rval < 0) { - dev_err(pci->dev, - "PULL control not supported for pin %s\n", - g->name); + case PIN_CONFIG_DRIVE_OPEN_DRAIN: + if (!opt->od_info) { + dev_err(pci->dev, + "OD control not supported for pin %s\n", + g->name); + return -ENOTSUPP; + } + base = opt->od_info->od_reg_base; + add = opt->od_info->od_reg_add; + mask = opt->od_info->od_mask; + if (param_val == 0) + rval = opt->od_info->od_disable; + else + rval = opt->od_info->od_enable; + if (rval < 0) { + dev_err(pci->dev, + "OD control not supported for pin %s\n", + g->name); + return -ENOTSUPP; + } + break; + default: + dev_err(pci->dev, "Properties not supported\n"); return -ENOTSUPP; } - break; - case PIN_CONFIG_DRIVE_OPEN_DRAIN: - if (!opt->od_info) { - dev_err(pci->dev, - "OD control not supported for pin %s\n", - g->name); - return -ENOTSUPP; - } - base = opt->od_info->od_reg_base; - add = opt->od_info->od_reg_add; - mask = opt->od_info->od_mask; - if (param_val == 0) - rval = opt->od_info->od_disable; - else - rval = opt->od_info->od_enable; - if (rval < 0) { - dev_err(pci->dev, - "OD control not supported for pin %s\n", - g->name); - return -ENOTSUPP; + dev_dbg(pci->dev, "%s(): Add0x%02x:0x%02x:0x%02x:0x%02x\n", + __func__, base, add, mask, rval); + ret = palmas_update_bits(pci->palmas, base, add, mask, rval); + if (ret < 0) { + dev_err(pci->dev, "Reg 0x%02x update failed: %d\n", + add, ret); + return ret; } - break; - default: - dev_err(pci->dev, "Properties not supported\n"); - return -ENOTSUPP; - } + } /* for each config */ - dev_dbg(pci->dev, "%s(): Add0x%02x:0x%02x:0x%02x:0x%02x\n", - __func__, base, add, mask, rval); - ret = palmas_update_bits(pci->palmas, base, add, mask, rval); - if (ret < 0) { - dev_err(pci->dev, "Reg 0x%02x update failed: %d\n", add, ret); - return ret; - } return 0; } @@ -960,7 +969,8 @@ static int palmas_pinconf_group_get(struct pinctrl_dev *pctldev, } static int palmas_pinconf_group_set(struct pinctrl_dev *pctldev, - unsigned group, unsigned long config) + unsigned group, unsigned long *configs, + unsigned num_configs) { dev_err(pctldev->dev, "palmas_pinconf_group_set op not supported\n"); return -ENOTSUPP; diff --git a/drivers/pinctrl/pinctrl-rockchip.c b/drivers/pinctrl/pinctrl-rockchip.c index 51a7c24981d1..abff5895e81f 100644 --- a/drivers/pinctrl/pinctrl-rockchip.c +++ b/drivers/pinctrl/pinctrl-rockchip.c @@ -574,32 +574,45 @@ static bool rockchip_pinconf_pull_valid(struct rockchip_pin_ctrl *ctrl, /* set the pin config settings for a specified pin */ static int rockchip_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin, - unsigned long config) + unsigned long *configs, unsigned num_configs) { struct rockchip_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); struct rockchip_pin_bank *bank = pin_to_bank(info, pin); - enum pin_config_param param = pinconf_to_config_param(config); - u16 arg = pinconf_to_config_argument(config); - - switch (param) { - case PIN_CONFIG_BIAS_DISABLE: - return rockchip_set_pull(bank, pin - bank->pin_base, param); - break; - case PIN_CONFIG_BIAS_PULL_UP: - case PIN_CONFIG_BIAS_PULL_DOWN: - case PIN_CONFIG_BIAS_PULL_PIN_DEFAULT: - if (!rockchip_pinconf_pull_valid(info->ctrl, param)) + enum pin_config_param param; + u16 arg; + int i; + int rc; + + for (i = 0; i < num_configs; i++) { + param = pinconf_to_config_param(configs[i]); + arg = pinconf_to_config_argument(configs[i]); + + switch (param) { + case PIN_CONFIG_BIAS_DISABLE: + rc = rockchip_set_pull(bank, pin - bank->pin_base, + param); + if (rc) + return rc; + break; + case PIN_CONFIG_BIAS_PULL_UP: + case PIN_CONFIG_BIAS_PULL_DOWN: + case PIN_CONFIG_BIAS_PULL_PIN_DEFAULT: + if (!rockchip_pinconf_pull_valid(info->ctrl, param)) + return -ENOTSUPP; + + if (!arg) + return -EINVAL; + + rc = rockchip_set_pull(bank, pin - bank->pin_base, + param); + if (rc) + return rc; + break; + default: return -ENOTSUPP; - - if (!arg) - return -EINVAL; - - return rockchip_set_pull(bank, pin - bank->pin_base, param); - break; - default: - return -ENOTSUPP; - break; - } + break; + } + } /* for each config */ return 0; } diff --git a/drivers/pinctrl/pinctrl-samsung.c b/drivers/pinctrl/pinctrl-samsung.c index 439f2ef680df..222648d69f25 100644 --- a/drivers/pinctrl/pinctrl-samsung.c +++ b/drivers/pinctrl/pinctrl-samsung.c @@ -442,9 +442,17 @@ static int samsung_pinconf_rw(struct pinctrl_dev *pctldev, unsigned int pin, /* set the pin config settings for a specified pin */ static int samsung_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin, - unsigned long config) + unsigned long *configs, unsigned num_configs) { - return samsung_pinconf_rw(pctldev, pin, &config, true); + int i, ret; + + for (i = 0; i < num_configs; i++) { + ret = samsung_pinconf_rw(pctldev, pin, &configs[i], true); + if (ret < 0) + return ret; + } /* for each config */ + + return 0; } /* get the pin config settings for a specified pin */ @@ -456,7 +464,8 @@ static int samsung_pinconf_get(struct pinctrl_dev *pctldev, unsigned int pin, /* set the pin config settings for a specified pin group */ static int samsung_pinconf_group_set(struct pinctrl_dev *pctldev, - unsigned group, unsigned long config) + unsigned group, unsigned long *configs, + unsigned num_configs) { struct samsung_pinctrl_drv_data *drvdata; const unsigned int *pins; @@ -466,7 +475,7 @@ static int samsung_pinconf_group_set(struct pinctrl_dev *pctldev, pins = drvdata->pin_groups[group].pins; for (cnt = 0; cnt < drvdata->pin_groups[group].num_pins; cnt++) - samsung_pinconf_set(pctldev, pins[cnt], config); + samsung_pinconf_set(pctldev, pins[cnt], configs, num_configs); return 0; } diff --git a/drivers/pinctrl/pinctrl-single.c b/drivers/pinctrl/pinctrl-single.c index 6866548fab31..8f31768c665d 100644 --- a/drivers/pinctrl/pinctrl-single.c +++ b/drivers/pinctrl/pinctrl-single.c @@ -209,7 +209,7 @@ struct pcs_device { static int pcs_pinconf_get(struct pinctrl_dev *pctldev, unsigned pin, unsigned long *config); static int pcs_pinconf_set(struct pinctrl_dev *pctldev, unsigned pin, - unsigned long config); + unsigned long *configs, unsigned num_configs); static enum pin_config_param pcs_bias[] = { PIN_CONFIG_BIAS_PULL_DOWN, @@ -536,7 +536,7 @@ static void pcs_pinconf_clear_bias(struct pinctrl_dev *pctldev, unsigned pin) int i; for (i = 0; i < ARRAY_SIZE(pcs_bias); i++) { config = pinconf_to_config_packed(pcs_bias[i], 0); - pcs_pinconf_set(pctldev, pin, config); + pcs_pinconf_set(pctldev, pin, &config, 1); } } @@ -622,22 +622,28 @@ static int pcs_pinconf_get(struct pinctrl_dev *pctldev, } static int pcs_pinconf_set(struct pinctrl_dev *pctldev, - unsigned pin, unsigned long config) + unsigned pin, unsigned long *configs, + unsigned num_configs) { struct pcs_device *pcs = pinctrl_dev_get_drvdata(pctldev); struct pcs_function *func; unsigned offset = 0, shift = 0, i, data, ret; u16 arg; + int j; ret = pcs_get_function(pctldev, pin, &func); if (ret) return ret; - for (i = 0; i < func->nconfs; i++) { - if (pinconf_to_config_param(config) == func->conf[i].param) { + for (j = 0; j < num_configs; j++) { + for (i = 0; i < func->nconfs; i++) { + if (pinconf_to_config_param(configs[j]) + != func->conf[i].param) + continue; + offset = pin * (pcs->width / BITS_PER_BYTE); data = pcs->read(pcs->base + offset); - arg = pinconf_to_config_argument(config); + arg = pinconf_to_config_argument(configs[j]); switch (func->conf[i].param) { /* 2 parameters */ case PIN_CONFIG_INPUT_SCHMITT: @@ -667,10 +673,14 @@ static int pcs_pinconf_set(struct pinctrl_dev *pctldev, return -ENOTSUPP; } pcs->write(data, pcs->base + offset); - return 0; + + break; } - } - return -ENOTSUPP; + if (i >= func->nconfs) + return -ENOTSUPP; + } /* for each config */ + + return 0; } static int pcs_pinconf_group_get(struct pinctrl_dev *pctldev, @@ -695,7 +705,8 @@ static int pcs_pinconf_group_get(struct pinctrl_dev *pctldev, } static int pcs_pinconf_group_set(struct pinctrl_dev *pctldev, - unsigned group, unsigned long config) + unsigned group, unsigned long *configs, + unsigned num_configs) { const unsigned *pins; unsigned npins; @@ -705,7 +716,7 @@ static int pcs_pinconf_group_set(struct pinctrl_dev *pctldev, if (ret) return ret; for (i = 0; i < npins; i++) { - if (pcs_pinconf_set(pctldev, pins[i], config)) + if (pcs_pinconf_set(pctldev, pins[i], configs, num_configs)) return -ENOTSUPP; } return 0; diff --git a/drivers/pinctrl/pinctrl-st.c b/drivers/pinctrl/pinctrl-st.c index 2a10a318b648..9cadc68ee572 100644 --- a/drivers/pinctrl/pinctrl-st.c +++ b/drivers/pinctrl/pinctrl-st.c @@ -909,15 +909,18 @@ static void st_pinconf_set_retime(struct st_pinctrl *info, config, pin); } -static int st_pinconf_set(struct pinctrl_dev *pctldev, - unsigned pin_id, unsigned long config) +static int st_pinconf_set(struct pinctrl_dev *pctldev, unsigned pin_id, + unsigned long *configs, unsigned num_configs) { int pin = st_gpio_pin(pin_id); struct st_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); struct st_pio_control *pc = st_get_pio_control(pctldev, pin_id); + int i; - st_pinconf_set_config(pc, pin, config); - st_pinconf_set_retime(info, pc, pin, config); + for (i = 0; i < num_configs; i++) { + st_pinconf_set_config(pc, pin, configs[i]); + st_pinconf_set_retime(info, pc, pin, configs[i]); + } /* for each config */ return 0; } diff --git a/drivers/pinctrl/pinctrl-sunxi.c b/drivers/pinctrl/pinctrl-sunxi.c index d251c76c2e62..8dbd465b01d3 100644 --- a/drivers/pinctrl/pinctrl-sunxi.c +++ b/drivers/pinctrl/pinctrl-sunxi.c @@ -274,50 +274,55 @@ static int sunxi_pconf_group_get(struct pinctrl_dev *pctldev, static int sunxi_pconf_group_set(struct pinctrl_dev *pctldev, unsigned group, - unsigned long config) + unsigned long *configs, + unsigned num_configs) { struct sunxi_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev); struct sunxi_pinctrl_group *g = &pctl->groups[group]; u32 val, mask; u16 strength; u8 dlevel; + int i; - switch (pinconf_to_config_param(config)) { - case PIN_CONFIG_DRIVE_STRENGTH: - strength = pinconf_to_config_argument(config); - if (strength > 40) - return -EINVAL; - /* - * We convert from mA to what the register expects: - * 0: 10mA - * 1: 20mA - * 2: 30mA - * 3: 40mA - */ - dlevel = strength / 10 - 1; - val = readl(pctl->membase + sunxi_dlevel_reg(g->pin)); - mask = DLEVEL_PINS_MASK << sunxi_dlevel_offset(g->pin); - writel((val & ~mask) | dlevel << sunxi_dlevel_offset(g->pin), - pctl->membase + sunxi_dlevel_reg(g->pin)); - break; - case PIN_CONFIG_BIAS_PULL_UP: - val = readl(pctl->membase + sunxi_pull_reg(g->pin)); - mask = PULL_PINS_MASK << sunxi_pull_offset(g->pin); - writel((val & ~mask) | 1 << sunxi_pull_offset(g->pin), - pctl->membase + sunxi_pull_reg(g->pin)); - break; - case PIN_CONFIG_BIAS_PULL_DOWN: - val = readl(pctl->membase + sunxi_pull_reg(g->pin)); - mask = PULL_PINS_MASK << sunxi_pull_offset(g->pin); - writel((val & ~mask) | 2 << sunxi_pull_offset(g->pin), - pctl->membase + sunxi_pull_reg(g->pin)); - break; - default: - break; - } + for (i = 0; i < num_configs; i++) { + switch (pinconf_to_config_param(configs[i])) { + case PIN_CONFIG_DRIVE_STRENGTH: + strength = pinconf_to_config_argument(configs[i]); + if (strength > 40) + return -EINVAL; + /* + * We convert from mA to what the register expects: + * 0: 10mA + * 1: 20mA + * 2: 30mA + * 3: 40mA + */ + dlevel = strength / 10 - 1; + val = readl(pctl->membase + sunxi_dlevel_reg(g->pin)); + mask = DLEVEL_PINS_MASK << sunxi_dlevel_offset(g->pin); + writel((val & ~mask) + | dlevel << sunxi_dlevel_offset(g->pin), + pctl->membase + sunxi_dlevel_reg(g->pin)); + break; + case PIN_CONFIG_BIAS_PULL_UP: + val = readl(pctl->membase + sunxi_pull_reg(g->pin)); + mask = PULL_PINS_MASK << sunxi_pull_offset(g->pin); + writel((val & ~mask) | 1 << sunxi_pull_offset(g->pin), + pctl->membase + sunxi_pull_reg(g->pin)); + break; + case PIN_CONFIG_BIAS_PULL_DOWN: + val = readl(pctl->membase + sunxi_pull_reg(g->pin)); + mask = PULL_PINS_MASK << sunxi_pull_offset(g->pin); + writel((val & ~mask) | 2 << sunxi_pull_offset(g->pin), + pctl->membase + sunxi_pull_reg(g->pin)); + break; + default: + break; + } - /* cache the config value */ - g->config = config; + /* cache the config value */ + g->config = configs[i]; + } /* for each config */ return 0; } diff --git a/drivers/pinctrl/pinctrl-tegra.c b/drivers/pinctrl/pinctrl-tegra.c index be7e900fb298..a2e93a2b5ff4 100644 --- a/drivers/pinctrl/pinctrl-tegra.c +++ b/drivers/pinctrl/pinctrl-tegra.c @@ -436,7 +436,8 @@ static int tegra_pinconf_get(struct pinctrl_dev *pctldev, } static int tegra_pinconf_set(struct pinctrl_dev *pctldev, - unsigned pin, unsigned long config) + unsigned pin, unsigned long *configs, + unsigned num_configs) { dev_err(pctldev->dev, "pin_config_set op not supported\n"); return -ENOTSUPP; @@ -471,51 +472,57 @@ static int tegra_pinconf_group_get(struct pinctrl_dev *pctldev, } static int tegra_pinconf_group_set(struct pinctrl_dev *pctldev, - unsigned group, unsigned long config) + unsigned group, unsigned long *configs, + unsigned num_configs) { struct tegra_pmx *pmx = pinctrl_dev_get_drvdata(pctldev); - enum tegra_pinconf_param param = TEGRA_PINCONF_UNPACK_PARAM(config); - u16 arg = TEGRA_PINCONF_UNPACK_ARG(config); + enum tegra_pinconf_param param; + u16 arg; const struct tegra_pingroup *g; - int ret; + int ret, i; s8 bank, bit, width; s16 reg; u32 val, mask; g = &pmx->soc->groups[group]; - ret = tegra_pinconf_reg(pmx, g, param, true, &bank, ®, &bit, - &width); - if (ret < 0) - return ret; + for (i = 0; i < num_configs; i++) { + param = TEGRA_PINCONF_UNPACK_PARAM(configs[i]); + arg = TEGRA_PINCONF_UNPACK_ARG(configs[i]); - val = pmx_readl(pmx, bank, reg); + ret = tegra_pinconf_reg(pmx, g, param, true, &bank, ®, &bit, + &width); + if (ret < 0) + return ret; - /* LOCK can't be cleared */ - if (param == TEGRA_PINCONF_PARAM_LOCK) { - if ((val & BIT(bit)) && !arg) { - dev_err(pctldev->dev, "LOCK bit cannot be cleared\n"); - return -EINVAL; + val = pmx_readl(pmx, bank, reg); + + /* LOCK can't be cleared */ + if (param == TEGRA_PINCONF_PARAM_LOCK) { + if ((val & BIT(bit)) && !arg) { + dev_err(pctldev->dev, "LOCK bit cannot be cleared\n"); + return -EINVAL; + } } - } - /* Special-case Boolean values; allow any non-zero as true */ - if (width == 1) - arg = !!arg; + /* Special-case Boolean values; allow any non-zero as true */ + if (width == 1) + arg = !!arg; - /* Range-check user-supplied value */ - mask = (1 << width) - 1; - if (arg & ~mask) { - dev_err(pctldev->dev, - "config %lx: %x too big for %d bit register\n", - config, arg, width); - return -EINVAL; - } + /* Range-check user-supplied value */ + mask = (1 << width) - 1; + if (arg & ~mask) { + dev_err(pctldev->dev, + "config %lx: %x too big for %d bit register\n", + configs[i], arg, width); + return -EINVAL; + } - /* Update register */ - val &= ~(mask << bit); - val |= arg << bit; - pmx_writel(pmx, val, bank, reg); + /* Update register */ + val &= ~(mask << bit); + val |= arg << bit; + pmx_writel(pmx, val, bank, reg); + } /* for each config */ return 0; } diff --git a/drivers/pinctrl/pinctrl-tz1090-pdc.c b/drivers/pinctrl/pinctrl-tz1090-pdc.c index 494ad4b83264..5bf01c28925e 100644 --- a/drivers/pinctrl/pinctrl-tz1090-pdc.c +++ b/drivers/pinctrl/pinctrl-tz1090-pdc.c @@ -737,39 +737,46 @@ static int tz1090_pdc_pinconf_get(struct pinctrl_dev *pctldev, } static int tz1090_pdc_pinconf_set(struct pinctrl_dev *pctldev, - unsigned int pin, unsigned long config) + unsigned int pin, unsigned long *configs, + unsigned num_configs) { struct tz1090_pdc_pmx *pmx = pinctrl_dev_get_drvdata(pctldev); - enum pin_config_param param = pinconf_to_config_param(config); - unsigned int arg = pinconf_to_config_argument(config); + enum pin_config_param param; + unsigned int arg; int ret; u32 reg, width, mask, shift, val, tmp; unsigned long flags; + int i; - dev_dbg(pctldev->dev, "%s(pin=%s, config=%#lx)\n", - __func__, tz1090_pdc_pins[pin].name, config); + for (i = 0; i < num_configs; i++) { + param = pinconf_to_config_param(configs[i]); + arg = pinconf_to_config_argument(configs[i]); - /* Get register information */ - ret = tz1090_pdc_pinconf_reg(pctldev, pin, param, true, - ®, &width, &mask, &shift, &val); - if (ret < 0) - return ret; + dev_dbg(pctldev->dev, "%s(pin=%s, config=%#lx)\n", + __func__, tz1090_pdc_pins[pin].name, configs[i]); - /* Unpack argument and range check it */ - if (arg > 1) { - dev_dbg(pctldev->dev, "%s: arg %u out of range\n", - __func__, arg); - return -EINVAL; - } + /* Get register information */ + ret = tz1090_pdc_pinconf_reg(pctldev, pin, param, true, + ®, &width, &mask, &shift, &val); + if (ret < 0) + return ret; - /* Write register field */ - __global_lock2(flags); - tmp = pmx_read(pmx, reg); - tmp &= ~mask; - if (arg) - tmp |= val << shift; - pmx_write(pmx, tmp, reg); - __global_unlock2(flags); + /* Unpack argument and range check it */ + if (arg > 1) { + dev_dbg(pctldev->dev, "%s: arg %u out of range\n", + __func__, arg); + return -EINVAL; + } + + /* Write register field */ + __global_lock2(flags); + tmp = pmx_read(pmx, reg); + tmp &= ~mask; + if (arg) + tmp |= val << shift; + pmx_write(pmx, tmp, reg); + __global_unlock2(flags); + } /* for each config */ return 0; } @@ -860,54 +867,68 @@ static int tz1090_pdc_pinconf_group_get(struct pinctrl_dev *pctldev, static int tz1090_pdc_pinconf_group_set(struct pinctrl_dev *pctldev, unsigned int group, - unsigned long config) + unsigned long *configs, + unsigned num_configs) { struct tz1090_pdc_pmx *pmx = pinctrl_dev_get_drvdata(pctldev); const struct tz1090_pdc_pingroup *g = &tz1090_pdc_groups[group]; - enum pin_config_param param = pinconf_to_config_param(config); + enum pin_config_param param; const unsigned int *pit; unsigned int i; int ret, arg; u32 reg, width, mask, shift, val; unsigned long flags; const int *map; + int j; - dev_dbg(pctldev->dev, "%s(group=%s, config=%#lx)\n", - __func__, g->name, config); + for (j = 0; j < num_configs; j++) { + param = pinconf_to_config_param(configs[j]); - /* Get register information */ - ret = tz1090_pdc_pinconf_group_reg(pctldev, g, param, true, - ®, &width, &mask, &shift, &map); - if (ret < 0) { - /* - * Maybe we're trying to set a per-pin configuration of a group, - * so do the pins one by one. This is mainly as a convenience. - */ - for (i = 0, pit = g->pins; i < g->npins; ++i, ++pit) { - ret = tz1090_pdc_pinconf_set(pctldev, *pit, config); - if (ret) - return ret; - } - return 0; - } + dev_dbg(pctldev->dev, "%s(group=%s, config=%#lx)\n", + __func__, g->name, configs[j]); - /* Unpack argument and map it to register value */ - arg = pinconf_to_config_argument(config); - for (i = 0; i < BIT(width); ++i) { - if (map[i] == arg || (map[i] == -EINVAL && !arg)) { - /* Write register field */ - __global_lock2(flags); - val = pmx_read(pmx, reg); - val &= ~mask; - val |= i << shift; - pmx_write(pmx, val, reg); - __global_unlock2(flags); + /* Get register information */ + ret = tz1090_pdc_pinconf_group_reg(pctldev, g, param, true, + ®, &width, &mask, &shift, + &map); + if (ret < 0) { + /* + * Maybe we're trying to set a per-pin configuration + * of a group, so do the pins one by one. This is + * mainly as a convenience. + */ + for (i = 0, pit = g->pins; i < g->npins; ++i, ++pit) { + ret = tz1090_pdc_pinconf_set(pctldev, *pit, + configs, num_configs); + if (ret) + return ret; + } return 0; } - } - dev_dbg(pctldev->dev, "%s: arg %u not supported\n", - __func__, arg); + /* Unpack argument and map it to register value */ + arg = pinconf_to_config_argument(configs[j]); + for (i = 0; i < BIT(width); ++i) { + if (map[i] == arg || (map[i] == -EINVAL && !arg)) { + /* Write register field */ + __global_lock2(flags); + val = pmx_read(pmx, reg); + val &= ~mask; + val |= i << shift; + pmx_write(pmx, val, reg); + __global_unlock2(flags); + goto next_config; + } + } + + dev_dbg(pctldev->dev, "%s: arg %u not supported\n", + __func__, arg); + return 0; + +next_config: + ; + } /* for each config */ + return 0; } diff --git a/drivers/pinctrl/pinctrl-tz1090.c b/drivers/pinctrl/pinctrl-tz1090.c index 72d955252e41..bc9cd7a7602e 100644 --- a/drivers/pinctrl/pinctrl-tz1090.c +++ b/drivers/pinctrl/pinctrl-tz1090.c @@ -1762,39 +1762,46 @@ static int tz1090_pinconf_get(struct pinctrl_dev *pctldev, } static int tz1090_pinconf_set(struct pinctrl_dev *pctldev, - unsigned int pin, unsigned long config) + unsigned int pin, unsigned long *configs, + unsigned num_configs) { struct tz1090_pmx *pmx = pinctrl_dev_get_drvdata(pctldev); - enum pin_config_param param = pinconf_to_config_param(config); - unsigned int arg = pinconf_to_config_argument(config); + enum pin_config_param param; + unsigned int arg; int ret; u32 reg, width, mask, shift, val, tmp; unsigned long flags; + int i; - dev_dbg(pctldev->dev, "%s(pin=%s, config=%#lx)\n", - __func__, tz1090_pins[pin].name, config); + for (i = 0; i < num_configs; i++) { + param = pinconf_to_config_param(configs[i]); + arg = pinconf_to_config_argument(configs[i]); - /* Get register information */ - ret = tz1090_pinconf_reg(pctldev, pin, param, true, - ®, &width, &mask, &shift, &val); - if (ret < 0) - return ret; + dev_dbg(pctldev->dev, "%s(pin=%s, config=%#lx)\n", + __func__, tz1090_pins[pin].name, configs[i]); - /* Unpack argument and range check it */ - if (arg > 1) { - dev_dbg(pctldev->dev, "%s: arg %u out of range\n", - __func__, arg); - return -EINVAL; - } + /* Get register information */ + ret = tz1090_pinconf_reg(pctldev, pin, param, true, + ®, &width, &mask, &shift, &val); + if (ret < 0) + return ret; - /* Write register field */ - __global_lock2(flags); - tmp = pmx_read(pmx, reg); - tmp &= ~mask; - if (arg) - tmp |= val << shift; - pmx_write(pmx, tmp, reg); - __global_unlock2(flags); + /* Unpack argument and range check it */ + if (arg > 1) { + dev_dbg(pctldev->dev, "%s: arg %u out of range\n", + __func__, arg); + return -EINVAL; + } + + /* Write register field */ + __global_lock2(flags); + tmp = pmx_read(pmx, reg); + tmp &= ~mask; + if (arg) + tmp |= val << shift; + pmx_write(pmx, tmp, reg); + __global_unlock2(flags); + } /* for each config */ return 0; } @@ -1894,68 +1901,81 @@ static int tz1090_pinconf_group_get(struct pinctrl_dev *pctldev, } static int tz1090_pinconf_group_set(struct pinctrl_dev *pctldev, - unsigned int group, unsigned long config) + unsigned int group, unsigned long *configs, + unsigned num_configs) { struct tz1090_pmx *pmx = pinctrl_dev_get_drvdata(pctldev); const struct tz1090_pingroup *g; - enum pin_config_param param = pinconf_to_config_param(config); + enum pin_config_param param; unsigned int arg, pin, i; const unsigned int *pit; int ret; u32 reg, width, mask, shift, val; unsigned long flags; const int *map; + int j; if (group >= ARRAY_SIZE(tz1090_groups)) { pin = group - ARRAY_SIZE(tz1090_groups); - return tz1090_pinconf_set(pctldev, pin, config); + return tz1090_pinconf_set(pctldev, pin, configs, num_configs); } g = &tz1090_groups[group]; if (g->npins == 1) { pin = g->pins[0]; - ret = tz1090_pinconf_set(pctldev, pin, config); + ret = tz1090_pinconf_set(pctldev, pin, configs, num_configs); if (ret != -ENOTSUPP) return ret; } - dev_dbg(pctldev->dev, "%s(group=%s, config=%#lx)\n", - __func__, g->name, config); + for (j = 0; j < num_configs; j++) { + param = pinconf_to_config_param(configs[j]); - /* Get register information */ - ret = tz1090_pinconf_group_reg(pctldev, g, param, true, - ®, &width, &mask, &shift, &map); - if (ret < 0) { - /* - * Maybe we're trying to set a per-pin configuration of a group, - * so do the pins one by one. This is mainly as a convenience. - */ - for (i = 0, pit = g->pins; i < g->npins; ++i, ++pit) { - ret = tz1090_pinconf_set(pctldev, *pit, config); - if (ret) - return ret; - } - return 0; - } + dev_dbg(pctldev->dev, "%s(group=%s, config=%#lx)\n", + __func__, g->name, configs[j]); - /* Unpack argument and map it to register value */ - arg = pinconf_to_config_argument(config); - for (i = 0; i < BIT(width); ++i) { - if (map[i] == arg || (map[i] == -EINVAL && !arg)) { - /* Write register field */ - __global_lock2(flags); - val = pmx_read(pmx, reg); - val &= ~mask; - val |= i << shift; - pmx_write(pmx, val, reg); - __global_unlock2(flags); + /* Get register information */ + ret = tz1090_pinconf_group_reg(pctldev, g, param, true, ®, + &width, &mask, &shift, &map); + if (ret < 0) { + /* + * Maybe we're trying to set a per-pin configuration + * of a group, so do the pins one by one. This is + * mainly as a convenience. + */ + for (i = 0, pit = g->pins; i < g->npins; ++i, ++pit) { + ret = tz1090_pinconf_set(pctldev, *pit, configs, + num_configs); + if (ret) + return ret; + } return 0; } - } - dev_dbg(pctldev->dev, "%s: arg %u not supported\n", - __func__, arg); - return -EINVAL; + /* Unpack argument and map it to register value */ + arg = pinconf_to_config_argument(configs[j]); + for (i = 0; i < BIT(width); ++i) { + if (map[i] == arg || (map[i] == -EINVAL && !arg)) { + /* Write register field */ + __global_lock2(flags); + val = pmx_read(pmx, reg); + val &= ~mask; + val |= i << shift; + pmx_write(pmx, val, reg); + __global_unlock2(flags); + goto next_config; + } + } + + dev_dbg(pctldev->dev, "%s: arg %u not supported\n", + __func__, arg); + return -EINVAL; + +next_config: + ; + } /* for each config */ + + return 0; } static struct pinconf_ops tz1090_pinconf_ops = { diff --git a/drivers/pinctrl/pinctrl-u300.c b/drivers/pinctrl/pinctrl-u300.c index 6fbdc06d2998..209a01b8bd3b 100644 --- a/drivers/pinctrl/pinctrl-u300.c +++ b/drivers/pinctrl/pinctrl-u300.c @@ -1027,21 +1027,23 @@ static int u300_pin_config_get(struct pinctrl_dev *pctldev, unsigned pin, } static int u300_pin_config_set(struct pinctrl_dev *pctldev, unsigned pin, - unsigned long config) + unsigned long *configs, unsigned num_configs) { struct pinctrl_gpio_range *range = pinctrl_find_gpio_range_from_pin(pctldev, pin); - int ret; + int ret, i; if (!range) return -EINVAL; - /* Note: none of these configurations take any argument */ - ret = u300_gpio_config_set(range->gc, - (pin - range->pin_base + range->base), - pinconf_to_config_param(config)); - if (ret) - return ret; + for (i = 0; i < num_configs; i++) { + /* Note: none of these configurations take any argument */ + ret = u300_gpio_config_set(range->gc, + (pin - range->pin_base + range->base), + pinconf_to_config_param(configs[i])); + if (ret) + return ret; + } /* for each config */ return 0; } diff --git a/drivers/pinctrl/pinctrl-xway.c b/drivers/pinctrl/pinctrl-xway.c index 86c8cf82105b..ed2d1ba69cef 100644 --- a/drivers/pinctrl/pinctrl-xway.c +++ b/drivers/pinctrl/pinctrl-xway.c @@ -499,74 +499,101 @@ static int xway_pinconf_get(struct pinctrl_dev *pctldev, static int xway_pinconf_set(struct pinctrl_dev *pctldev, unsigned pin, - unsigned long config) + unsigned long *configs, + unsigned num_configs) { struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctldev); - enum ltq_pinconf_param param = LTQ_PINCONF_UNPACK_PARAM(config); - int arg = LTQ_PINCONF_UNPACK_ARG(config); + enum ltq_pinconf_param param; + int arg; int port = PORT(pin); u32 reg; + int i; + + for (i = 0; i < num_configs; i++) { + param = LTQ_PINCONF_UNPACK_PARAM(configs[i]); + arg = LTQ_PINCONF_UNPACK_ARG(configs[i]); + + switch (param) { + case LTQ_PINCONF_PARAM_OPEN_DRAIN: + if (port == PORT3) + reg = GPIO3_OD; + else + reg = GPIO_OD(pin); + if (arg == 0) + gpio_setbit(info->membase[0], + reg, + PORT_PIN(pin)); + else + gpio_clearbit(info->membase[0], + reg, + PORT_PIN(pin)); + break; - switch (param) { - case LTQ_PINCONF_PARAM_OPEN_DRAIN: - if (port == PORT3) - reg = GPIO3_OD; - else - reg = GPIO_OD(pin); - if (arg == 0) + case LTQ_PINCONF_PARAM_PULL: + if (port == PORT3) + reg = GPIO3_PUDEN; + else + reg = GPIO_PUDEN(pin); + if (arg == 0) { + gpio_clearbit(info->membase[0], + reg, + PORT_PIN(pin)); + break; + } gpio_setbit(info->membase[0], reg, PORT_PIN(pin)); - else - gpio_clearbit(info->membase[0], reg, PORT_PIN(pin)); - break; - case LTQ_PINCONF_PARAM_PULL: - if (port == PORT3) - reg = GPIO3_PUDEN; - else - reg = GPIO_PUDEN(pin); - if (arg == 0) { - gpio_clearbit(info->membase[0], reg, PORT_PIN(pin)); + if (port == PORT3) + reg = GPIO3_PUDSEL; + else + reg = GPIO_PUDSEL(pin); + if (arg == 1) + gpio_clearbit(info->membase[0], + reg, + PORT_PIN(pin)); + else if (arg == 2) + gpio_setbit(info->membase[0], + reg, + PORT_PIN(pin)); + else + dev_err(pctldev->dev, + "Invalid pull value %d\n", arg); break; - } - gpio_setbit(info->membase[0], reg, PORT_PIN(pin)); - if (port == PORT3) - reg = GPIO3_PUDSEL; - else - reg = GPIO_PUDSEL(pin); - if (arg == 1) - gpio_clearbit(info->membase[0], reg, PORT_PIN(pin)); - else if (arg == 2) - gpio_setbit(info->membase[0], reg, PORT_PIN(pin)); - else - dev_err(pctldev->dev, "Invalid pull value %d\n", arg); - break; + case LTQ_PINCONF_PARAM_OUTPUT: + reg = GPIO_DIR(pin); + if (arg == 0) + gpio_clearbit(info->membase[0], + reg, + PORT_PIN(pin)); + else + gpio_setbit(info->membase[0], + reg, + PORT_PIN(pin)); + break; - case LTQ_PINCONF_PARAM_OUTPUT: - reg = GPIO_DIR(pin); - if (arg == 0) - gpio_clearbit(info->membase[0], reg, PORT_PIN(pin)); - else - gpio_setbit(info->membase[0], reg, PORT_PIN(pin)); - break; + default: + dev_err(pctldev->dev, + "Invalid config param %04x\n", param); + return -ENOTSUPP; + } + } /* for each config */ - default: - dev_err(pctldev->dev, "Invalid config param %04x\n", param); - return -ENOTSUPP; - } return 0; } int xway_pinconf_group_set(struct pinctrl_dev *pctldev, unsigned selector, - unsigned long config) + unsigned long *configs, + unsigned num_configs) { struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctldev); int i, ret = 0; for (i = 0; i < info->grps[selector].npins && !ret; i++) ret = xway_pinconf_set(pctldev, - info->grps[selector].pins[i], config); + info->grps[selector].pins[i], + configs, + num_configs); return ret; } diff --git a/drivers/pinctrl/sh-pfc/pinctrl.c b/drivers/pinctrl/sh-pfc/pinctrl.c index 8649ec3910a3..e758af95c209 100644 --- a/drivers/pinctrl/sh-pfc/pinctrl.c +++ b/drivers/pinctrl/sh-pfc/pinctrl.c @@ -529,38 +529,44 @@ static int sh_pfc_pinconf_get(struct pinctrl_dev *pctldev, unsigned _pin, } static int sh_pfc_pinconf_set(struct pinctrl_dev *pctldev, unsigned _pin, - unsigned long config) + unsigned long *configs, unsigned num_configs) { struct sh_pfc_pinctrl *pmx = pinctrl_dev_get_drvdata(pctldev); struct sh_pfc *pfc = pmx->pfc; - enum pin_config_param param = pinconf_to_config_param(config); + enum pin_config_param param; unsigned long flags; + unsigned int i; - if (!sh_pfc_pinconf_validate(pfc, _pin, param)) - return -ENOTSUPP; + for (i = 0; i < num_configs; i++) { + param = pinconf_to_config_param(configs[i]); - switch (param) { - case PIN_CONFIG_BIAS_PULL_UP: - case PIN_CONFIG_BIAS_PULL_DOWN: - case PIN_CONFIG_BIAS_DISABLE: - if (!pfc->info->ops || !pfc->info->ops->set_bias) + if (!sh_pfc_pinconf_validate(pfc, _pin, param)) return -ENOTSUPP; - spin_lock_irqsave(&pfc->lock, flags); - pfc->info->ops->set_bias(pfc, _pin, param); - spin_unlock_irqrestore(&pfc->lock, flags); + switch (param) { + case PIN_CONFIG_BIAS_PULL_UP: + case PIN_CONFIG_BIAS_PULL_DOWN: + case PIN_CONFIG_BIAS_DISABLE: + if (!pfc->info->ops || !pfc->info->ops->set_bias) + return -ENOTSUPP; - break; + spin_lock_irqsave(&pfc->lock, flags); + pfc->info->ops->set_bias(pfc, _pin, param); + spin_unlock_irqrestore(&pfc->lock, flags); - default: - return -ENOTSUPP; - } + break; + + default: + return -ENOTSUPP; + } + } /* for each config */ return 0; } static int sh_pfc_pinconf_group_set(struct pinctrl_dev *pctldev, unsigned group, - unsigned long config) + unsigned long *configs, + unsigned num_configs) { struct sh_pfc_pinctrl *pmx = pinctrl_dev_get_drvdata(pctldev); const unsigned int *pins; @@ -571,7 +577,7 @@ static int sh_pfc_pinconf_group_set(struct pinctrl_dev *pctldev, unsigned group, num_pins = pmx->pfc->info->groups[group].nr_pins; for (i = 0; i < num_pins; ++i) - sh_pfc_pinconf_set(pctldev, pins[i], config); + sh_pfc_pinconf_set(pctldev, pins[i], configs, num_configs); return 0; } diff --git a/drivers/pinctrl/vt8500/pinctrl-wmt.c b/drivers/pinctrl/vt8500/pinctrl-wmt.c index 0cc4335bc0f2..39aec0850810 100644 --- a/drivers/pinctrl/vt8500/pinctrl-wmt.c +++ b/drivers/pinctrl/vt8500/pinctrl-wmt.c @@ -424,15 +424,16 @@ static int wmt_pinconf_get(struct pinctrl_dev *pctldev, unsigned pin, } static int wmt_pinconf_set(struct pinctrl_dev *pctldev, unsigned pin, - unsigned long config) + unsigned long *configs, unsigned num_configs) { struct wmt_pinctrl_data *data = pinctrl_dev_get_drvdata(pctldev); - enum pin_config_param param = pinconf_to_config_param(config); - u16 arg = pinconf_to_config_argument(config); + enum pin_config_param param; + u16 arg; u32 bank = WMT_BANK_FROM_PIN(pin); u32 bit = WMT_BIT_FROM_PIN(pin); u32 reg_pull_en = data->banks[bank].reg_pull_en; u32 reg_pull_cfg = data->banks[bank].reg_pull_cfg; + int i; if ((reg_pull_en == NO_REG) || (reg_pull_cfg == NO_REG)) { dev_err(data->dev, "bias functions not supported on pin %d\n", @@ -440,28 +441,33 @@ static int wmt_pinconf_set(struct pinctrl_dev *pctldev, unsigned pin, return -EINVAL; } - if ((param == PIN_CONFIG_BIAS_PULL_DOWN) || - (param == PIN_CONFIG_BIAS_PULL_UP)) { - if (arg == 0) - param = PIN_CONFIG_BIAS_DISABLE; - } + for (i = 0; i < num_configs; i++) { + param = pinconf_to_config_param(configs[i]); + arg = pinconf_to_config_argument(configs[i]); - switch (param) { - case PIN_CONFIG_BIAS_DISABLE: - wmt_clearbits(data, reg_pull_en, BIT(bit)); - break; - case PIN_CONFIG_BIAS_PULL_DOWN: - wmt_clearbits(data, reg_pull_cfg, BIT(bit)); - wmt_setbits(data, reg_pull_en, BIT(bit)); - break; - case PIN_CONFIG_BIAS_PULL_UP: - wmt_setbits(data, reg_pull_cfg, BIT(bit)); - wmt_setbits(data, reg_pull_en, BIT(bit)); - break; - default: - dev_err(data->dev, "unknown pinconf param\n"); - return -EINVAL; - } + if ((param == PIN_CONFIG_BIAS_PULL_DOWN) || + (param == PIN_CONFIG_BIAS_PULL_UP)) { + if (arg == 0) + param = PIN_CONFIG_BIAS_DISABLE; + } + + switch (param) { + case PIN_CONFIG_BIAS_DISABLE: + wmt_clearbits(data, reg_pull_en, BIT(bit)); + break; + case PIN_CONFIG_BIAS_PULL_DOWN: + wmt_clearbits(data, reg_pull_cfg, BIT(bit)); + wmt_setbits(data, reg_pull_en, BIT(bit)); + break; + case PIN_CONFIG_BIAS_PULL_UP: + wmt_setbits(data, reg_pull_cfg, BIT(bit)); + wmt_setbits(data, reg_pull_en, BIT(bit)); + break; + default: + dev_err(data->dev, "unknown pinconf param\n"); + return -EINVAL; + } + } /* for each config */ return 0; } |