diff options
Diffstat (limited to 'drivers')
38 files changed, 64 insertions, 64 deletions
diff --git a/drivers/media/pci/bt8xx/bttv-audio-hook.c b/drivers/media/pci/bt8xx/bttv-audio-hook.c index 346fc7f58839..8febe7358a8f 100644 --- a/drivers/media/pci/bt8xx/bttv-audio-hook.c +++ b/drivers/media/pci/bt8xx/bttv-audio-hook.c @@ -1,5 +1,5 @@ /* - * Handlers for board audio hooks, splitted from bttv-cards + * Handlers for board audio hooks, split from bttv-cards * * Copyright (c) 2006 Mauro Carvalho Chehab <mchehab@kernel.org> * This code is placed under the terms of the GNU General Public License diff --git a/drivers/media/pci/bt8xx/bttv-audio-hook.h b/drivers/media/pci/bt8xx/bttv-audio-hook.h index be16a537a03a..c61b9ac4f4e3 100644 --- a/drivers/media/pci/bt8xx/bttv-audio-hook.h +++ b/drivers/media/pci/bt8xx/bttv-audio-hook.h @@ -1,5 +1,5 @@ /* - * Handlers for board audio hooks, splitted from bttv-cards + * Handlers for board audio hooks, split from bttv-cards * * Copyright (c) 2006 Mauro Carvalho Chehab <mchehab@kernel.org> * This code is placed under the terms of the GNU General Public License diff --git a/drivers/media/pci/bt8xx/bttv-cards.c b/drivers/media/pci/bt8xx/bttv-cards.c index 2616243b2c49..b1c6f3e9c3d0 100644 --- a/drivers/media/pci/bt8xx/bttv-cards.c +++ b/drivers/media/pci/bt8xx/bttv-cards.c @@ -2,7 +2,7 @@ bttv-cards.c - this file has configuration informations - card-specific stuff + this file has configuration information - card-specific stuff like the big tvcards array for the most part Copyright (C) 1996,97,98 Ralph Metzler (rjkm@thp.uni-koeln.de) @@ -1391,7 +1391,7 @@ struct tvcard bttv_tvcards[] = { .gpiomux = {0x947fff, 0x987fff,0x947fff,0x947fff }, .gpiomute = 0x947fff, /* tvtuner, radio, external,internal, mute, stereo - * tuner, Composit, SVid, Composit-on-Svid-adapter */ + * tuner, Composite, SVid, Composite-on-Svid-adapter */ .muxsel = MUXSEL(2, 3, 0, 1), .tuner_type = TUNER_MT2032, .tuner_addr = ADDR_UNSET, @@ -1411,7 +1411,7 @@ struct tvcard bttv_tvcards[] = { .gpiomux = {0x947fff, 0x987fff,0x947fff,0x947fff }, .gpiomute = 0x947fff, /* tvtuner, radio, external,internal, mute, stereo - * tuner, Composit, SVid, Composit-on-Svid-adapter */ + * tuner, Composite, SVid, Composite-on-Svid-adapter */ .muxsel = MUXSEL(2, 3, 0, 1), .tuner_type = TUNER_MT2032, .tuner_addr = ADDR_UNSET, @@ -4180,7 +4180,7 @@ static void init_PXC200(struct bttv *btv) bttv_I2CWrite(btv,0x5E,0,0x80,1); /* Initialise 12C508 PIC */ - /* The I2CWrite and I2CRead commmands are actually to the + /* The I2CWrite and I2CRead commands are actually to the * same chips - but the R/W bit is included in the address * argument so the numbers are different */ @@ -4289,7 +4289,7 @@ init_RTV24 (struct bttv *btv) /* ----------------------------------------------------------------------- */ /* * The PCI-8604PW contains a CPLD, probably an ispMACH 4A, that filters - * the PCI REQ signals comming from the four BT878 chips. After power + * the PCI REQ signals coming from the four BT878 chips. After power * up, the CPLD does not forward requests to the bus, which prevents * the BT878 from fetching RISC instructions from memory. While the * CPLD is connected to most of the GPIOs of PCI device 0xD, only @@ -4405,7 +4405,7 @@ static void rv605_muxsel(struct bttv *btv, unsigned int input) gpio_bits(0x07f, muxgpio[input]); - /* reset all conections */ + /* reset all connections */ gpio_bits(0x200,0x200); mdelay(1); gpio_bits(0x200,0x000); diff --git a/drivers/media/pci/bt8xx/bttv-driver.c b/drivers/media/pci/bt8xx/bttv-driver.c index 5e769c09dbd0..b7150648081d 100644 --- a/drivers/media/pci/bt8xx/bttv-driver.c +++ b/drivers/media/pci/bt8xx/bttv-driver.c @@ -2435,7 +2435,7 @@ static int bttv_s_fmt_vid_cap(struct file *file, void *priv, f->fmt.pix.field = field; - /* update our state informations */ + /* update our state information */ fh->fmt = fmt; fh->cap.field = f->fmt.pix.field; fh->cap.last = V4L2_FIELD_NONE; @@ -3064,7 +3064,7 @@ static int bttv_open(struct file *file) V4L2 apps we now reset the cropping parameters as seen through this fh, which is to say VIDIOC_G_SELECTION and scaling limit checks will use btv->crop[0], the default cropping parameters for the - current video standard, and VIDIOC_S_FMT will not implicitely + current video standard, and VIDIOC_S_FMT will not implicitly change the cropping parameters until VIDIOC_S_SELECTION has been called. */ fh->do_crop = !reset_crop; /* module parameter */ diff --git a/drivers/media/pci/bt8xx/bttv-risc.c b/drivers/media/pci/bt8xx/bttv-risc.c index 74aff6877d9c..6b3c73674a3c 100644 --- a/drivers/media/pci/bt8xx/bttv-risc.c +++ b/drivers/media/pci/bt8xx/bttv-risc.c @@ -93,7 +93,7 @@ bttv_risc_packed(struct bttv *btv, struct btcx_riscmem *risc, *(rp++)=cpu_to_le32(sg_dma_address(sg)+offset); offset+=bpl; } else { - /* scanline needs to be splitted */ + /* scanline needs to be split */ todo = bpl; *(rp++)=cpu_to_le32(BT848_RISC_WRITE|BT848_RISC_SOL| (sg_dma_len(sg)-offset)); diff --git a/drivers/media/pci/bt8xx/bttv.h b/drivers/media/pci/bt8xx/bttv.h index a27384adadd2..d24b9ef9f59f 100644 --- a/drivers/media/pci/bt8xx/bttv.h +++ b/drivers/media/pci/bt8xx/bttv.h @@ -288,7 +288,7 @@ extern void bttv_init_card1(struct bttv *btv); extern void bttv_init_card2(struct bttv *btv); extern void bttv_init_tuner(struct bttv *btv); -/* card-specific funtions */ +/* card-specific functions */ extern void tea5757_set_freq(struct bttv *btv, unsigned short freq); extern u32 bttv_tda9880_setnorm(struct bttv *btv, u32 gpiobits); diff --git a/drivers/media/pci/bt8xx/dst.c b/drivers/media/pci/bt8xx/dst.c index b98de2a22f78..c94318c71a0c 100644 --- a/drivers/media/pci/bt8xx/dst.c +++ b/drivers/media/pci/bt8xx/dst.c @@ -1295,15 +1295,15 @@ static int dst_get_signal(struct dst_state *state) static int dst_tone_power_cmd(struct dst_state *state) { - u8 paket[8] = { 0x00, 0x09, 0xff, 0xff, 0x01, 0x00, 0x00, 0x00 }; + u8 packet[8] = { 0x00, 0x09, 0xff, 0xff, 0x01, 0x00, 0x00, 0x00 }; if (state->dst_type != DST_TYPE_IS_SAT) return -EOPNOTSUPP; - paket[4] = state->tx_tuna[4]; - paket[2] = state->tx_tuna[2]; - paket[3] = state->tx_tuna[3]; - paket[7] = dst_check_sum (paket, 7); - return dst_command(state, paket, 8); + packet[4] = state->tx_tuna[4]; + packet[2] = state->tx_tuna[2]; + packet[3] = state->tx_tuna[3]; + packet[7] = dst_check_sum (packet, 7); + return dst_command(state, packet, 8); } static int dst_get_tuna(struct dst_state *state) @@ -1429,18 +1429,18 @@ error: static int dst_set_diseqc(struct dvb_frontend *fe, struct dvb_diseqc_master_cmd *cmd) { struct dst_state *state = fe->demodulator_priv; - u8 paket[8] = { 0x00, 0x08, 0x04, 0xe0, 0x10, 0x38, 0xf0, 0xec }; + u8 packet[8] = { 0x00, 0x08, 0x04, 0xe0, 0x10, 0x38, 0xf0, 0xec }; if (state->dst_type != DST_TYPE_IS_SAT) return -EOPNOTSUPP; if (cmd->msg_len > 0 && cmd->msg_len < 5) - memcpy(&paket[3], cmd->msg, cmd->msg_len); + memcpy(&packet[3], cmd->msg, cmd->msg_len); else if (cmd->msg_len == 5 && state->dst_hw_cap & DST_TYPE_HAS_DISEQC5) - memcpy(&paket[2], cmd->msg, cmd->msg_len); + memcpy(&packet[2], cmd->msg, cmd->msg_len); else return -EINVAL; - paket[7] = dst_check_sum(&paket[0], 7); - return dst_command(state, paket, 8); + packet[7] = dst_check_sum(&packet[0], 7); + return dst_command(state, packet, 8); } static int dst_set_voltage(struct dvb_frontend *fe, enum fe_sec_voltage voltage) diff --git a/drivers/media/pci/cobalt/cobalt-v4l2.c b/drivers/media/pci/cobalt/cobalt-v4l2.c index c088de551081..f9fa3a7c3b8f 100644 --- a/drivers/media/pci/cobalt/cobalt-v4l2.c +++ b/drivers/media/pci/cobalt/cobalt-v4l2.c @@ -375,7 +375,7 @@ static void cobalt_dma_stop_streaming(struct cobalt_stream *s) } spin_unlock_irqrestore(&s->irqlock, flags); - /* Wait 100 milisecond for DMA to finish, abort on timeout. */ + /* Wait 100 millisecond for DMA to finish, abort on timeout. */ if (!wait_event_timeout(s->q.done_wq, is_dma_done(s), msecs_to_jiffies(timeout_msec))) { omni_sg_dma_abort_channel(s); diff --git a/drivers/media/pci/cx18/cx18-cards.h b/drivers/media/pci/cx18/cx18-cards.h index 02d0fb703a41..c563cc2358ba 100644 --- a/drivers/media/pci/cx18/cx18-cards.h +++ b/drivers/media/pci/cx18/cx18-cards.h @@ -83,7 +83,7 @@ struct cx18_gpio_i2c_slave_reset { u32 active_hi_mask; /* GPIO outputs that reset i2c chips when high */ int msecs_asserted; /* time period reset must remain asserted */ int msecs_recovery; /* time after deassert for chips to be ready */ - u32 ir_reset_mask; /* GPIO to reset the Zilog Z8F0811 IR contoller */ + u32 ir_reset_mask; /* GPIO to reset the Zilog Z8F0811 IR controller */ }; struct cx18_gpio_audio_input { /* select tuner/line in input */ diff --git a/drivers/media/pci/cx18/cx18-dvb.c b/drivers/media/pci/cx18/cx18-dvb.c index a3a7f7065349..51ecbe350d0e 100644 --- a/drivers/media/pci/cx18/cx18-dvb.c +++ b/drivers/media/pci/cx18/cx18-dvb.c @@ -120,8 +120,8 @@ static struct zl10353_config leadtek_dvr3100h_demod = { /* * Due to * - * 1. an absence of information on how to prgram the MT352 - * 2. the Linux mt352 module pushing MT352 initialzation off onto us here + * 1. an absence of information on how to program the MT352 + * 2. the Linux mt352 module pushing MT352 initialization off onto us here * * We have to use an init sequence that *you* must extract from the Windows * driver (yuanrap.sys) and which we load as a firmware. diff --git a/drivers/media/pci/cx18/cx18-fileops.c b/drivers/media/pci/cx18/cx18-fileops.c index a3f44e30f821..f778965a2eb8 100644 --- a/drivers/media/pci/cx18/cx18-fileops.c +++ b/drivers/media/pci/cx18/cx18-fileops.c @@ -403,7 +403,7 @@ static size_t cx18_copy_mdl_to_user(struct cx18_stream *s, tot_written += rc; if (stop || /* Forced stopping point for VBI insertion */ - tot_written >= ucount || /* Reader request statisfied */ + tot_written >= ucount || /* Reader request satisfied */ mdl->curr_buf->readpos < mdl->curr_buf->bytesused || mdl->readpos >= mdl->bytesused) /* MDL buffers drained */ break; diff --git a/drivers/media/pci/cx18/cx18-io.h b/drivers/media/pci/cx18/cx18-io.h index a3c96fb5d28d..da7871fdb56d 100644 --- a/drivers/media/pci/cx18/cx18-io.h +++ b/drivers/media/pci/cx18/cx18-io.h @@ -23,7 +23,7 @@ /* * Readback and retry of MMIO access for reliability: * The concept was suggested by Steve Toth <stoth@linuxtv.org>. - * The implmentation is the fault of Andy Walls <awalls@md.metrocast.net>. + * The implementation is the fault of Andy Walls <awalls@md.metrocast.net>. * * *write* functions are implied to retry the mmio unless suffixed with _noretry * *read* functions never retry the mmio (it never helps to do so) diff --git a/drivers/media/pci/cx18/cx18-vbi.c b/drivers/media/pci/cx18/cx18-vbi.c index 81f1e27436fd..48cb96f953a0 100644 --- a/drivers/media/pci/cx18/cx18-vbi.c +++ b/drivers/media/pci/cx18/cx18-vbi.c @@ -24,7 +24,7 @@ /* * Raster Reference/Protection (RP) bytes, used in Start/End Active * Video codes emitted from the digitzer in VIP 1.x mode, that flag the start - * of VBI sample or VBI ancillary data regions in the digitial ratser line. + * of VBI sample or VBI ancillary data regions in the digital ratser line. * * Task FieldEven VerticalBlank HorizontalBlank 0 0 0 0 */ diff --git a/drivers/media/pci/cx18/cx23418.h b/drivers/media/pci/cx18/cx23418.h index 15205b662952..e9f6e50ca5b4 100644 --- a/drivers/media/pci/cx18/cx23418.h +++ b/drivers/media/pci/cx18/cx23418.h @@ -439,7 +439,7 @@ /* Error in I2C data xfer (but I2C device is present) */ #define CXERR_I2CDEV_XFERERR 0x000011 -/* Chanel changing component not ready */ +/* Channel changing component not ready */ #define CXERR_CHANNELNOTREADY 0x000012 /* PPU (Presensation/Decoder) mail box is corrupted */ diff --git a/drivers/media/pci/cx23885/cx23885-417.c b/drivers/media/pci/cx23885/cx23885-417.c index a00b77d80ed9..4863bd4ea5d0 100644 --- a/drivers/media/pci/cx23885/cx23885-417.c +++ b/drivers/media/pci/cx23885/cx23885-417.c @@ -1561,7 +1561,7 @@ int cx23885_417_register(struct cx23885_dev *dev) pr_info("%s: registered device %s [mpeg]\n", dev->name, video_device_node_name(dev->v4l_device)); - /* ST: Configure the encoder paramaters, but don't begin + /* ST: Configure the encoder parameters, but don't begin * encoding, this resolves an issue where the first time the * encoder is started video can be choppy. */ diff --git a/drivers/media/pci/cx23885/cx23885-alsa.c b/drivers/media/pci/cx23885/cx23885-alsa.c index ee9d329c4038..c9c1385208f9 100644 --- a/drivers/media/pci/cx23885/cx23885-alsa.c +++ b/drivers/media/pci/cx23885/cx23885-alsa.c @@ -59,7 +59,7 @@ module_param(audio_debug, int, 0644); MODULE_PARM_DESC(audio_debug, "enable debug messages [analog audio]"); /**************************************************************************** - Board specific funtions + Board specific functions ****************************************************************************/ /* Constants taken from cx88-reg.h */ diff --git a/drivers/media/pci/cx23885/cx23885-core.c b/drivers/media/pci/cx23885/cx23885-core.c index fd5c52b21436..cec3cbca8d32 100644 --- a/drivers/media/pci/cx23885/cx23885-core.c +++ b/drivers/media/pci/cx23885/cx23885-core.c @@ -1996,9 +1996,9 @@ static inline int encoder_on_portc(struct cx23885_dev *dev) * and report errors if we think we're tampering with a GPIo that might * be assigned to the encoder (and used for the host bus). * - * GPIO 2 thru 0 - On the cx23885 bridge - * GPIO 18 thru 3 - On the cx23417 host bus interface - * GPIO 23 thru 19 - On the cx25840 a/v core + * GPIO 2 through 0 - On the cx23885 bridge + * GPIO 18 through 3 - On the cx23417 host bus interface + * GPIO 23 through 19 - On the cx25840 a/v core */ void cx23885_gpio_set(struct cx23885_dev *dev, u32 mask) { diff --git a/drivers/media/pci/cx23885/cx23885.h b/drivers/media/pci/cx23885/cx23885.h index cf965efabe66..4d34799431dc 100644 --- a/drivers/media/pci/cx23885/cx23885.h +++ b/drivers/media/pci/cx23885/cx23885.h @@ -246,7 +246,7 @@ struct cx23885_i2c { struct i2c_client i2c_client; u32 i2c_rc; - /* 885 registers used for raw addess */ + /* 885 registers used for raw address */ u32 i2c_period; u32 reg_ctrl; u32 reg_stat; diff --git a/drivers/media/pci/cx23885/cx23888-ir.c b/drivers/media/pci/cx23885/cx23888-ir.c index 1d775c90df51..a4d66141c4bb 100644 --- a/drivers/media/pci/cx23885/cx23888-ir.c +++ b/drivers/media/pci/cx23885/cx23888-ir.c @@ -548,7 +548,7 @@ static int cx23888_ir_irq_handler(struct v4l2_subdev *sd, u32 status, ror = stats & STATS_ROR; /* Rx FIFO Over Run */ tse = irqen & IRQEN_TSE; /* Tx FIFO Service Request IRQ Enable */ - rse = irqen & IRQEN_RSE; /* Rx FIFO Service Reuqest IRQ Enable */ + rse = irqen & IRQEN_RSE; /* Rx FIFO Service Request IRQ Enable */ rte = irqen & IRQEN_RTE; /* Rx Pulse Width Timer Time Out IRQ Enable */ roe = irqen & IRQEN_ROE; /* Rx FIFO Over Run IRQ Enable */ @@ -638,7 +638,7 @@ static int cx23888_ir_irq_handler(struct v4l2_subdev *sd, u32 status, events |= V4L2_SUBDEV_IR_RX_END_OF_RX_DETECTED; } if (v) { - /* Clear STATS_ROR & STATS_RTO as needed by reseting hardware */ + /* Clear STATS_ROR & STATS_RTO as needed by resetting hardware */ cx23888_ir_write4(dev, CX23888_IR_CNTRL_REG, cntrl & ~v); cx23888_ir_write4(dev, CX23888_IR_CNTRL_REG, cntrl); *handled = true; diff --git a/drivers/media/pci/cx25821/cx25821-alsa.c b/drivers/media/pci/cx25821/cx25821-alsa.c index 0a6c90e92557..926e12a1554a 100644 --- a/drivers/media/pci/cx25821/cx25821-alsa.c +++ b/drivers/media/pci/cx25821/cx25821-alsa.c @@ -120,7 +120,7 @@ module_param(debug, int, 0644); MODULE_PARM_DESC(debug, "enable debug messages"); /**************************************************************************** - Module specific funtions + Module specific functions ****************************************************************************/ /* Constants taken from cx88-reg.h */ #define AUD_INT_DN_RISCI1 (1 << 0) diff --git a/drivers/media/pci/cx25821/cx25821-sram.h b/drivers/media/pci/cx25821/cx25821-sram.h index b94e0d4df664..a907662dbb1c 100644 --- a/drivers/media/pci/cx25821/cx25821-sram.h +++ b/drivers/media/pci/cx25821/cx25821-sram.h @@ -24,7 +24,7 @@ #define AUDIO_CMDS_SIZE 80 /* AUDIO CMDS size in bytes */ #define MBIF_CMDS_SIZE 80 /* MBIF CMDS size in bytes */ -/* #define RX_SRAM_POOL_START_SIZE = 0; // Start of useable RX SRAM for buffers */ +/* #define RX_SRAM_POOL_START_SIZE = 0; // Start of usable RX SRAM for buffers */ #define VID_IQ_SIZE 64 /* VID instruction queue size in bytes */ #define MBIF_IQ_SIZE 64 #define AUDIO_IQ_SIZE 64 /* AUD instruction queue size in bytes */ diff --git a/drivers/media/pci/cx25821/cx25821.h b/drivers/media/pci/cx25821/cx25821.h index 25eba4ac4499..b422275ff4f1 100644 --- a/drivers/media/pci/cx25821/cx25821.h +++ b/drivers/media/pci/cx25821/cx25821.h @@ -156,7 +156,7 @@ struct cx25821_i2c { struct i2c_client i2c_client; u32 i2c_rc; - /* cx25821 registers used for raw addess */ + /* cx25821 registers used for raw address */ u32 i2c_period; u32 reg_ctrl; u32 reg_stat; diff --git a/drivers/media/pci/dm1105/dm1105.c b/drivers/media/pci/dm1105/dm1105.c index a84c8270ea13..60138ca3372b 100644 --- a/drivers/media/pci/dm1105/dm1105.c +++ b/drivers/media/pci/dm1105/dm1105.c @@ -517,7 +517,7 @@ static int dm1105_i2c_xfer(struct i2c_adapter *i2c_adap, msgs[i].buf[byte] = rc; } } else if ((msgs[i].buf[0] == 0xf7) && (msgs[i].addr == 0x55)) { - /* prepaired for cx24116 firmware */ + /* prepared for cx24116 firmware */ /* Write in small blocks */ len = msgs[i].len - 1; k = 1; diff --git a/drivers/media/pci/intel/ipu3/ipu3-cio2.c b/drivers/media/pci/intel/ipu3/ipu3-cio2.c index 9b664c02ed03..617fb2e944dc 100644 --- a/drivers/media/pci/intel/ipu3/ipu3-cio2.c +++ b/drivers/media/pci/intel/ipu3/ipu3-cio2.c @@ -264,7 +264,7 @@ static void cio2_fbpt_exit(struct cio2_queue *q, struct device *dev) */ /* - * shift for keeping value range suitable for 32-bit integer arithmetics + * shift for keeping value range suitable for 32-bit integer arithmetic */ #define LIMIT_SHIFT 8 diff --git a/drivers/media/pci/ivtv/ivtv-yuv.c b/drivers/media/pci/ivtv/ivtv-yuv.c index 1380474519f2..c3c2c79585f5 100644 --- a/drivers/media/pci/ivtv/ivtv-yuv.c +++ b/drivers/media/pci/ivtv/ivtv-yuv.c @@ -110,7 +110,7 @@ static int ivtv_yuv_prep_user_dma(struct ivtv *itv, struct ivtv_user_dma *dma, /* * Inherit the -EFAULT from rc's * initialization, but allow it to be - * overriden by uv_pages above if it was an + * overridden by uv_pages above if it was an * actual errno. */ } else { diff --git a/drivers/media/pci/meye/meye.h b/drivers/media/pci/meye/meye.h index 0af868eb6210..aff6631535be 100644 --- a/drivers/media/pci/meye/meye.h +++ b/drivers/media/pci/meye/meye.h @@ -281,7 +281,7 @@ struct meye_grab_buffer { unsigned long sequence; /* sequence number */ }; -/* size of kfifos containings buffer indices */ +/* size of kfifos containing buffer indices */ #define MEYE_QUEUE_SIZE MEYE_MAX_BUFNBRS /* Motion Eye device structure */ diff --git a/drivers/media/pci/ngene/ngene-core.c b/drivers/media/pci/ngene/ngene-core.c index 25f16833a475..27953b3610a3 100644 --- a/drivers/media/pci/ngene/ngene-core.c +++ b/drivers/media/pci/ngene/ngene-core.c @@ -1014,7 +1014,7 @@ static int FillTSIdleBuffer(struct SRingBufferDescriptor *pIdleBuffer, /* Point to first buffer entry */ struct SBufferHeader *Cur = pRingBuffer->Head; int i; - /* Loop thru all buffer and set Buffer 2 pointers to TSIdlebuffer */ + /* Loop through all buffer and set Buffer 2 pointers to TSIdlebuffer */ for (i = 0; i < n; i++) { Cur->Buffer2 = pIdleBuffer->Head->Buffer1; Cur->scList2 = pIdleBuffer->Head->scList1; diff --git a/drivers/media/pci/pt3/pt3.h b/drivers/media/pci/pt3/pt3.h index 495891a4ee17..a53124438f51 100644 --- a/drivers/media/pci/pt3/pt3.h +++ b/drivers/media/pci/pt3/pt3.h @@ -76,7 +76,7 @@ struct xfer_desc { u32 addr_l; /* bus address of target data buffer */ u32 addr_h; u32 size; - u32 next_l; /* bus adddress of the next xfer_desc */ + u32 next_l; /* bus address of the next xfer_desc */ u32 next_h; }; diff --git a/drivers/media/pci/saa7134/saa7134-cards.c b/drivers/media/pci/saa7134/saa7134-cards.c index 40ce033cb884..94d6484a3afe 100644 --- a/drivers/media/pci/saa7134/saa7134-cards.c +++ b/drivers/media/pci/saa7134/saa7134-cards.c @@ -6423,7 +6423,7 @@ struct pci_device_id saa7134_pci_tbl[] = { .vendor = PCI_VENDOR_ID_PHILIPS, .device = PCI_DEVICE_ID_PHILIPS_SAA7133, .subvendor = 0x5168, - .subdevice = 0x3502, /* whats the difference to 0x3306 ?*/ + .subdevice = 0x3502, /* what's the difference to 0x3306 ?*/ .driver_data = SAA7134_BOARD_FLYDVBT_HYBRID_CARDBUS, },{ .vendor = PCI_VENDOR_ID_PHILIPS, diff --git a/drivers/media/pci/saa7146/mxb.c b/drivers/media/pci/saa7146/mxb.c index 44440c6208df..e94324b1de68 100644 --- a/drivers/media/pci/saa7146/mxb.c +++ b/drivers/media/pci/saa7146/mxb.c @@ -399,7 +399,7 @@ static int mxb_init_done(struct saa7146_dev* dev) /* check if the saa7740 (aka 'sound arena module') is present on the mxb. if so, we must initialize it. due to lack of - informations about the saa7740, the values were reverse + information about the saa7740, the values were reverse engineered. */ msg.addr = 0x1b; msg.flags = 0; @@ -495,7 +495,7 @@ static int vidioc_s_input(struct file *file, void *fh, unsigned int input) input_port_selection[input].hps_sync); /* prepare switching of tea6415c and saa7111a; - have a look at the 'background'-file for further informations */ + have a look at the 'background'-file for further information */ switch (input) { case TUNER: i = SAA7115_COMPOSITE0; diff --git a/drivers/media/pci/saa7164/saa7164-api.c b/drivers/media/pci/saa7164/saa7164-api.c index e318ccf81277..d6c996f39cf2 100644 --- a/drivers/media/pci/saa7164/saa7164-api.c +++ b/drivers/media/pci/saa7164/saa7164-api.c @@ -749,7 +749,7 @@ int saa7164_api_initialize_dif(struct saa7164_port *port) if (port->type == SAA7164_MPEG_ENCODER) { /* Pick any analog standard to init the diff. * we'll come back during encoder_init' - * and set the correct standard if requried. + * and set the correct standard if required. */ std = V4L2_STD_NTSC; } else diff --git a/drivers/media/pci/saa7164/saa7164-cards.c b/drivers/media/pci/saa7164/saa7164-cards.c index 3af16062e79d..9a6fe7cd4d59 100644 --- a/drivers/media/pci/saa7164/saa7164-cards.c +++ b/drivers/media/pci/saa7164/saa7164-cards.c @@ -685,7 +685,7 @@ struct saa7164_subid saa7164_subids[] = { .subvendor = 0x0070, .subdevice = 0xf111, .card = SAA7164_BOARD_HAUPPAUGE_HVR2255, - /* Prototype card left here for documenation purposes. + /* Prototype card left here for documentation purposes. .card = SAA7164_BOARD_HAUPPAUGE_HVR2255proto, */ }, { @@ -866,7 +866,7 @@ void saa7164_card_setup(struct saa7164_dev *dev) * access to I2C. Instead we have to communicate through the device f/w for * register access to 'processing units'. Each unit has a unique * id, regardless of how the physical implementation occurs across - * the three physical i2c busses. The being said if we want leverge of + * the three physical i2c buses. The being said if we want leverge of * the existing kernel drivers for tuners and demods we have to 'speak i2c', * to this bridge implements 3 virtual i2c buses. This is a helper function * for those. diff --git a/drivers/media/pci/saa7164/saa7164-core.c b/drivers/media/pci/saa7164/saa7164-core.c index f33349e16359..05f25c9bb308 100644 --- a/drivers/media/pci/saa7164/saa7164-core.c +++ b/drivers/media/pci/saa7164/saa7164-core.c @@ -157,7 +157,7 @@ static void saa7164_ts_verifier(struct saa7164_buffer *buf) } - /* Only report errors if we've been through this function atleast + /* Only report errors if we've been through this function at least * once already and the cached cc values are primed. First time through * always generates errors. */ @@ -1020,7 +1020,7 @@ static int saa7164_dev_setup(struct saa7164_dev *dev) dev->bmmio = (u8 __iomem *)dev->lmmio; dev->bmmio2 = (u8 __iomem *)dev->lmmio2; - /* Inerrupt and ack register locations offset of bmmio */ + /* Interrupt and ack register locations offset of bmmio */ dev->int_status = 0x183000 + 0xf80; dev->int_ack = 0x183000 + 0xf90; diff --git a/drivers/media/pci/saa7164/saa7164-fw.c b/drivers/media/pci/saa7164/saa7164-fw.c index a50461861133..ed27b3ce5e8e 100644 --- a/drivers/media/pci/saa7164/saa7164-fw.c +++ b/drivers/media/pci/saa7164/saa7164-fw.c @@ -409,7 +409,7 @@ int saa7164_downloadfirmware(struct saa7164_dev *dev) (version & 0x0000001f), (version & 0xffff0000) >> 16); - /* Load the firmwware from the disk if required */ + /* Load the firmware from the disk if required */ if (version == 0) { printk(KERN_INFO "%s() Waiting for firmware upload (%s)\n", diff --git a/drivers/media/pci/solo6x10/solo6x10-disp.c b/drivers/media/pci/solo6x10/solo6x10-disp.c index 11c98f0625e4..f61007022471 100644 --- a/drivers/media/pci/solo6x10/solo6x10-disp.c +++ b/drivers/media/pci/solo6x10/solo6x10-disp.c @@ -71,7 +71,7 @@ static void solo_vin_config(struct solo_dev *solo_dev) solo_reg_write(solo_dev, SOLO_VI_CH_FORMAT, SOLO_VI_FD_SEL_MASK(0) | SOLO_VI_PROG_MASK(0)); - /* On 6110, initialize mozaic darkness stength */ + /* On 6110, initialize mozaic darkness strength */ if (solo_dev->type == SOLO_DEV_6010) solo_reg_write(solo_dev, SOLO_VI_FMT_CFG, 0); else @@ -230,7 +230,7 @@ int solo_set_motion_block(struct solo_dev *solo_dev, u8 ch, } /* First 8k is motion flag (512 bytes * 16). Following that is an 8k+8k - * threshold and working table for each channel. Atleast that's what the + * threshold and working table for each channel. At least that's what the * spec says. However, this code (taken from rdk) has some mystery 8k * block right after the flag area, before the first thresh table. */ static void solo_motion_config(struct solo_dev *solo_dev) diff --git a/drivers/media/pci/sta2x11/sta2x11_vip.c b/drivers/media/pci/sta2x11/sta2x11_vip.c index 411177ec4d72..2452d8f59cb0 100644 --- a/drivers/media/pci/sta2x11/sta2x11_vip.c +++ b/drivers/media/pci/sta2x11/sta2x11_vip.c @@ -110,7 +110,7 @@ static inline struct vip_buffer *to_vip_buffer(struct vb2_v4l2_buffer *vb2) * @std: video standard (e.g. PAL/NTSC) * @input: input line for video signal ( 0 or 1 ) * @disabled: Device is in power down state - * @slock: for excluse acces of registers + * @slock: for excluse access of registers * @vb_vidq: queue maintained by videobuf2 layer * @buffer_list: list of buffer in use * @sequence: sequence number of acquired buffer diff --git a/drivers/media/pci/ttpci/av7110.c b/drivers/media/pci/ttpci/av7110.c index 409defc75c05..9345287ad963 100644 --- a/drivers/media/pci/ttpci/av7110.c +++ b/drivers/media/pci/ttpci/av7110.c @@ -2313,7 +2313,7 @@ static int frontend_init(struct av7110 *av7110) * (n in defined in the RPS_THRESH1 counter threshold) * I think HS is raised high on the beginning of the n-th line * and remains high until this n-th line that triggered - * it is completely received. When the receiption of n-th line + * it is completely received. When the reception of n-th line * ends, HS is lowered. * * To transmit data over DMA, 7146 needs changing state at @@ -2347,7 +2347,7 @@ static int frontend_init(struct av7110 *av7110) * hardware debug note: a working budget card (including budget patch) * with vpeirq() interrupt setup in mode "0x90" (every 64K) will * generate 3 interrupts per 25-Hz DMA frame of 2*188*512 bytes - * and that means 3*25=75 Hz of interrupt freqency, as seen by + * and that means 3*25=75 Hz of interrupt frequency, as seen by * watch cat /proc/interrupts * * If this frequency is 3x lower (and data received in the DMA @@ -2356,7 +2356,7 @@ static int frontend_init(struct av7110 *av7110) * this means VSYNC line is not connected in the hardware. * (check soldering pcb and pins) * The same behaviour of missing VSYNC can be duplicated on budget - * cards, by seting DD1_INIT trigger mode 7 in 3rd nibble. + * cards, by setting DD1_INIT trigger mode 7 in 3rd nibble. */ static int av7110_attach(struct saa7146_dev* dev, struct saa7146_pci_extension_data *pci_ext) diff --git a/drivers/media/pci/tw68/tw68-video.c b/drivers/media/pci/tw68/tw68-video.c index d3f727045ae8..4f74b14c3b4f 100644 --- a/drivers/media/pci/tw68/tw68-video.c +++ b/drivers/media/pci/tw68/tw68-video.c @@ -446,7 +446,7 @@ static void tw68_buf_queue(struct vb2_buffer *vb) /* * buffer_prepare * - * Set the ancilliary information into the buffer structure. This + * Set the ancillary information into the buffer structure. This * includes generating the necessary risc program if it hasn't already * been done for the current buffer format. * The structure fh contains the details of the format requested by the |