diff options
Diffstat (limited to 'drivers')
294 files changed, 9882 insertions, 4020 deletions
diff --git a/drivers/acorn/char/defkeymap-l7200.c b/drivers/acorn/char/defkeymap-l7200.c index 28a5fbc6aa1a..93d80a1c36f9 100644 --- a/drivers/acorn/char/defkeymap-l7200.c +++ b/drivers/acorn/char/defkeymap-l7200.c @@ -347,40 +347,40 @@ char *func_table[MAX_NR_FUNC] = { }; struct kbdiacruc accent_table[MAX_DIACR] = { - {'`', 'A', '\300'}, {'`', 'a', '\340'}, - {'\'', 'A', '\301'}, {'\'', 'a', '\341'}, - {'^', 'A', '\302'}, {'^', 'a', '\342'}, - {'~', 'A', '\303'}, {'~', 'a', '\343'}, - {'"', 'A', '\304'}, {'"', 'a', '\344'}, - {'O', 'A', '\305'}, {'o', 'a', '\345'}, - {'0', 'A', '\305'}, {'0', 'a', '\345'}, - {'A', 'A', '\305'}, {'a', 'a', '\345'}, - {'A', 'E', '\306'}, {'a', 'e', '\346'}, - {',', 'C', '\307'}, {',', 'c', '\347'}, - {'`', 'E', '\310'}, {'`', 'e', '\350'}, - {'\'', 'E', '\311'}, {'\'', 'e', '\351'}, - {'^', 'E', '\312'}, {'^', 'e', '\352'}, - {'"', 'E', '\313'}, {'"', 'e', '\353'}, - {'`', 'I', '\314'}, {'`', 'i', '\354'}, - {'\'', 'I', '\315'}, {'\'', 'i', '\355'}, - {'^', 'I', '\316'}, {'^', 'i', '\356'}, - {'"', 'I', '\317'}, {'"', 'i', '\357'}, - {'-', 'D', '\320'}, {'-', 'd', '\360'}, - {'~', 'N', '\321'}, {'~', 'n', '\361'}, - {'`', 'O', '\322'}, {'`', 'o', '\362'}, - {'\'', 'O', '\323'}, {'\'', 'o', '\363'}, - {'^', 'O', '\324'}, {'^', 'o', '\364'}, - {'~', 'O', '\325'}, {'~', 'o', '\365'}, - {'"', 'O', '\326'}, {'"', 'o', '\366'}, - {'/', 'O', '\330'}, {'/', 'o', '\370'}, - {'`', 'U', '\331'}, {'`', 'u', '\371'}, - {'\'', 'U', '\332'}, {'\'', 'u', '\372'}, - {'^', 'U', '\333'}, {'^', 'u', '\373'}, - {'"', 'U', '\334'}, {'"', 'u', '\374'}, - {'\'', 'Y', '\335'}, {'\'', 'y', '\375'}, - {'T', 'H', '\336'}, {'t', 'h', '\376'}, - {'s', 's', '\337'}, {'"', 'y', '\377'}, - {'s', 'z', '\337'}, {'i', 'j', '\377'}, + {'`', 'A', 0300}, {'`', 'a', 0340}, + {'\'', 'A', 0301}, {'\'', 'a', 0341}, + {'^', 'A', 0302}, {'^', 'a', 0342}, + {'~', 'A', 0303}, {'~', 'a', 0343}, + {'"', 'A', 0304}, {'"', 'a', 0344}, + {'O', 'A', 0305}, {'o', 'a', 0345}, + {'0', 'A', 0305}, {'0', 'a', 0345}, + {'A', 'A', 0305}, {'a', 'a', 0345}, + {'A', 'E', 0306}, {'a', 'e', 0346}, + {',', 'C', 0307}, {',', 'c', 0347}, + {'`', 'E', 0310}, {'`', 'e', 0350}, + {'\'', 'E', 0311}, {'\'', 'e', 0351}, + {'^', 'E', 0312}, {'^', 'e', 0352}, + {'"', 'E', 0313}, {'"', 'e', 0353}, + {'`', 'I', 0314}, {'`', 'i', 0354}, + {'\'', 'I', 0315}, {'\'', 'i', 0355}, + {'^', 'I', 0316}, {'^', 'i', 0356}, + {'"', 'I', 0317}, {'"', 'i', 0357}, + {'-', 'D', 0320}, {'-', 'd', 0360}, + {'~', 'N', 0321}, {'~', 'n', 0361}, + {'`', 'O', 0322}, {'`', 'o', 0362}, + {'\'', 'O', 0323}, {'\'', 'o', 0363}, + {'^', 'O', 0324}, {'^', 'o', 0364}, + {'~', 'O', 0325}, {'~', 'o', 0365}, + {'"', 'O', 0326}, {'"', 'o', 0366}, + {'/', 'O', 0330}, {'/', 'o', 0370}, + {'`', 'U', 0331}, {'`', 'u', 0371}, + {'\'', 'U', 0332}, {'\'', 'u', 0372}, + {'^', 'U', 0333}, {'^', 'u', 0373}, + {'"', 'U', 0334}, {'"', 'u', 0374}, + {'\'', 'Y', 0335}, {'\'', 'y', 0375}, + {'T', 'H', 0336}, {'t', 'h', 0376}, + {'s', 's', 0337}, {'"', 'y', 0377}, + {'s', 'z', 0337}, {'i', 'j', 0377}, }; unsigned int accent_table_size = 68; diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index ba8f7f4dfa11..e469647330de 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -538,6 +538,15 @@ config PATA_RADISYS If unsure, say N. +config PATA_RB500 + tristate "RouterBoard 500 PATA CompactFlash support" + depends on MIKROTIK_RB500 + help + This option enables support for the RouterBoard 500 + PATA CompactFlash controller. + + If unsure, say N. + config PATA_RZ1000 tristate "PC Tech RZ1000 PATA support" depends on PCI diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile index 701651e37c89..0511e6f0bb58 100644 --- a/drivers/ata/Makefile +++ b/drivers/ata/Makefile @@ -55,6 +55,7 @@ obj-$(CONFIG_PATA_PDC2027X) += pata_pdc2027x.o obj-$(CONFIG_PATA_PDC_OLD) += pata_pdc202xx_old.o obj-$(CONFIG_PATA_QDI) += pata_qdi.o obj-$(CONFIG_PATA_RADISYS) += pata_radisys.o +obj-$(CONFIG_PATA_RB500) += pata_rb500_cf.o obj-$(CONFIG_PATA_RZ1000) += pata_rz1000.o obj-$(CONFIG_PATA_SC1200) += pata_sc1200.o obj-$(CONFIG_PATA_SERVERWORKS) += pata_serverworks.o diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 1db93b619074..6978469eb16d 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -186,6 +186,7 @@ enum { AHCI_HFLAG_NO_MSI = (1 << 5), /* no PCI MSI */ AHCI_HFLAG_NO_PMP = (1 << 6), /* no PMP */ AHCI_HFLAG_NO_HOTPLUG = (1 << 7), /* ignore PxSERR.DIAG.N */ + AHCI_HFLAG_SECT255 = (1 << 8), /* max 255 sectors */ /* ap->flags bits */ @@ -255,6 +256,7 @@ static void ahci_vt8251_error_handler(struct ata_port *ap); static void ahci_p5wdh_error_handler(struct ata_port *ap); static void ahci_post_internal_cmd(struct ata_queued_cmd *qc); static int ahci_port_resume(struct ata_port *ap); +static void ahci_dev_config(struct ata_device *dev); static unsigned int ahci_fill_sg(struct ata_queued_cmd *qc, void *cmd_tbl); static void ahci_fill_cmd_slot(struct ahci_port_priv *pp, unsigned int tag, u32 opts); @@ -294,6 +296,8 @@ static const struct ata_port_operations ahci_ops = { .check_altstatus = ahci_check_status, .dev_select = ata_noop_dev_select, + .dev_config = ahci_dev_config, + .tf_read = ahci_tf_read, .qc_defer = sata_pmp_qc_defer_cmd_switch, @@ -425,7 +429,7 @@ static const struct ata_port_info ahci_port_info[] = { /* board_ahci_sb600 */ { AHCI_HFLAGS (AHCI_HFLAG_IGN_SERR_INTERNAL | - AHCI_HFLAG_32BIT_ONLY | AHCI_HFLAG_NO_PMP), + AHCI_HFLAG_SECT255 | AHCI_HFLAG_NO_PMP), .flags = AHCI_FLAG_COMMON, .link_flags = AHCI_LFLAG_COMMON, .pio_mask = 0x1f, /* pio0-4 */ @@ -563,6 +567,18 @@ static const struct pci_device_id ahci_pci_tbl[] = { { PCI_VDEVICE(NVIDIA, 0x0abd), board_ahci }, /* MCP79 */ { PCI_VDEVICE(NVIDIA, 0x0abe), board_ahci }, /* MCP79 */ { PCI_VDEVICE(NVIDIA, 0x0abf), board_ahci }, /* MCP79 */ + { PCI_VDEVICE(NVIDIA, 0x0bc8), board_ahci }, /* MCP7B */ + { PCI_VDEVICE(NVIDIA, 0x0bc9), board_ahci }, /* MCP7B */ + { PCI_VDEVICE(NVIDIA, 0x0bca), board_ahci }, /* MCP7B */ + { PCI_VDEVICE(NVIDIA, 0x0bcb), board_ahci }, /* MCP7B */ + { PCI_VDEVICE(NVIDIA, 0x0bcc), board_ahci }, /* MCP7B */ + { PCI_VDEVICE(NVIDIA, 0x0bcd), board_ahci }, /* MCP7B */ + { PCI_VDEVICE(NVIDIA, 0x0bce), board_ahci }, /* MCP7B */ + { PCI_VDEVICE(NVIDIA, 0x0bcf), board_ahci }, /* MCP7B */ + { PCI_VDEVICE(NVIDIA, 0x0bd0), board_ahci }, /* MCP7B */ + { PCI_VDEVICE(NVIDIA, 0x0bd1), board_ahci }, /* MCP7B */ + { PCI_VDEVICE(NVIDIA, 0x0bd2), board_ahci }, /* MCP7B */ + { PCI_VDEVICE(NVIDIA, 0x0bd3), board_ahci }, /* MCP7B */ /* SiS */ { PCI_VDEVICE(SI, 0x1184), board_ahci }, /* SiS 966 */ @@ -668,7 +684,7 @@ static void ahci_save_initial_config(struct pci_dev *pdev, cap &= ~HOST_CAP_NCQ; } - if ((cap && HOST_CAP_PMP) && (hpriv->flags & AHCI_HFLAG_NO_PMP)) { + if ((cap & HOST_CAP_PMP) && (hpriv->flags & AHCI_HFLAG_NO_PMP)) { dev_printk(KERN_INFO, &pdev->dev, "controller can't do PMP, turning off CAP_PMP\n"); cap &= ~HOST_CAP_PMP; @@ -1176,6 +1192,14 @@ static void ahci_init_controller(struct ata_host *host) VPRINTK("HOST_CTL 0x%x\n", tmp); } +static void ahci_dev_config(struct ata_device *dev) +{ + struct ahci_host_priv *hpriv = dev->link->ap->host->private_data; + + if (hpriv->flags & AHCI_HFLAG_SECT255) + dev->max_sectors = 255; +} + static unsigned int ahci_dev_classify(struct ata_port *ap) { void __iomem *port_mmio = ahci_port_base(ap); diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c index 9e8ec19260af..0770cb7391a4 100644 --- a/drivers/ata/libata-acpi.c +++ b/drivers/ata/libata-acpi.c @@ -382,7 +382,7 @@ static int ata_dev_get_GTF(struct ata_device *dev, struct ata_acpi_gtf **gtf) if (ata_msg_probe(ap)) ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER: port#: %d\n", - __FUNCTION__, ap->port_no); + __func__, ap->port_no); /* _GTF has no input parameters */ status = acpi_evaluate_object(dev->acpi_handle, "_GTF", NULL, &output); @@ -402,7 +402,7 @@ static int ata_dev_get_GTF(struct ata_device *dev, struct ata_acpi_gtf **gtf) if (ata_msg_probe(ap)) ata_dev_printk(dev, KERN_DEBUG, "%s: Run _GTF: " "length or ptr is NULL (0x%llx, 0x%p)\n", - __FUNCTION__, + __func__, (unsigned long long)output.length, output.pointer); rc = -EINVAL; @@ -432,7 +432,7 @@ static int ata_dev_get_GTF(struct ata_device *dev, struct ata_acpi_gtf **gtf) if (ata_msg_probe(ap)) ata_dev_printk(dev, KERN_DEBUG, "%s: returning gtf=%p, gtf_count=%d\n", - __FUNCTION__, *gtf, rc); + __func__, *gtf, rc); } return rc; @@ -725,7 +725,7 @@ static int ata_acpi_push_id(struct ata_device *dev) if (ata_msg_probe(ap)) ata_dev_printk(dev, KERN_DEBUG, "%s: ix = %d, port#: %d\n", - __FUNCTION__, dev->devno, ap->port_no); + __func__, dev->devno, ap->port_no); /* Give the drive Identify data to the drive via the _SDD method */ /* _SDD: set up input parameters */ diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index fbc24358ada0..4bbe31f98ef8 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -106,14 +106,15 @@ static struct ata_force_ent *ata_force_tbl; static int ata_force_tbl_size; static char ata_force_param_buf[PAGE_SIZE] __initdata; -module_param_string(force, ata_force_param_buf, sizeof(ata_force_param_buf), 0444); +/* param_buf is thrown away after initialization, disallow read */ +module_param_string(force, ata_force_param_buf, sizeof(ata_force_param_buf), 0); MODULE_PARM_DESC(force, "Force ATA configurations including cable type, link speed and transfer mode (see Documentation/kernel-parameters.txt for details)"); int atapi_enabled = 1; module_param(atapi_enabled, int, 0444); MODULE_PARM_DESC(atapi_enabled, "Enable discovery of ATAPI devices (0=off, 1=on)"); -int atapi_dmadir = 0; +static int atapi_dmadir = 0; module_param(atapi_dmadir, int, 0444); MODULE_PARM_DESC(atapi_dmadir, "Enable ATAPI DMADIR bridge support (0=off, 1=on)"); @@ -1719,7 +1720,7 @@ void ata_port_flush_task(struct ata_port *ap) cancel_rearming_delayed_work(&ap->port_task); if (ata_msg_ctl(ap)) - ata_port_printk(ap, KERN_DEBUG, "%s: EXIT\n", __FUNCTION__); + ata_port_printk(ap, KERN_DEBUG, "%s: EXIT\n", __func__); } static void ata_qc_complete_internal(struct ata_queued_cmd *qc) @@ -2056,7 +2057,7 @@ int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class, int rc; if (ata_msg_ctl(ap)) - ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER\n", __FUNCTION__); + ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER\n", __func__); ata_dev_select(ap, dev->devno, 1, 1); /* select device 0/1 */ retry: @@ -2253,12 +2254,12 @@ int ata_dev_configure(struct ata_device *dev) if (!ata_dev_enabled(dev) && ata_msg_info(ap)) { ata_dev_printk(dev, KERN_INFO, "%s: ENTER/EXIT -- nodev\n", - __FUNCTION__); + __func__); return 0; } if (ata_msg_probe(ap)) - ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER\n", __FUNCTION__); + ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER\n", __func__); /* set horkage */ dev->horkage |= ata_dev_blacklisted(dev); @@ -2279,7 +2280,7 @@ int ata_dev_configure(struct ata_device *dev) ata_dev_printk(dev, KERN_DEBUG, "%s: cfg 49:%04x 82:%04x 83:%04x 84:%04x " "85:%04x 86:%04x 87:%04x 88:%04x\n", - __FUNCTION__, + __func__, id[49], id[82], id[83], id[84], id[85], id[86], id[87], id[88]); @@ -2511,13 +2512,13 @@ int ata_dev_configure(struct ata_device *dev) if (ata_msg_probe(ap)) ata_dev_printk(dev, KERN_DEBUG, "%s: EXIT, drv_stat = 0x%x\n", - __FUNCTION__, ata_chk_status(ap)); + __func__, ata_chk_status(ap)); return 0; err_out_nosup: if (ata_msg_probe(ap)) ata_dev_printk(dev, KERN_DEBUG, - "%s: EXIT, err\n", __FUNCTION__); + "%s: EXIT, err\n", __func__); return rc; } @@ -6567,6 +6568,8 @@ int ata_host_suspend(struct ata_host *host, pm_message_t mesg) ata_lpm_enable(host); rc = ata_host_request_pm(host, mesg, 0, ATA_EHI_QUIET, 1); + if (rc == 0) + host->dev->power.power_state = mesg; return rc; } @@ -6585,6 +6588,7 @@ void ata_host_resume(struct ata_host *host) { ata_host_request_pm(host, PMSG_ON, ATA_EH_SOFTRESET, ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET, 0); + host->dev->power.power_state = PMSG_ON; /* reenable link pm */ ata_lpm_disable(host); diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index 698ce2cea52c..681252fd8143 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -2150,6 +2150,15 @@ int ata_eh_reset(struct ata_link *link, int classify, ap->ops->set_piomode(ap, dev); } + if (!softreset && !hardreset) { + if (verbose) + ata_link_printk(link, KERN_INFO, "no reset method " + "available, skipping reset\n"); + if (!(lflags & ATA_LFLAG_ASSUME_CLASS)) + lflags |= ATA_LFLAG_ASSUME_ATA; + goto done; + } + /* Determine which reset to use and record in ehc->i.action. * prereset() may examine and modify it. */ @@ -2254,6 +2263,7 @@ int ata_eh_reset(struct ata_link *link, int classify, lflags |= ATA_LFLAG_ASSUME_ATA; } + done: ata_link_for_each_dev(dev, link) { /* After the reset, the device state is PIO 0 and the * controller state is undefined. Reset also wakes up diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 0562b0a49f3b..8f0e8f2bc628 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -862,9 +862,10 @@ static int ata_scsi_dev_config(struct scsi_device *sdev, struct request_queue *q = sdev->request_queue; void *buf; - /* set the min alignment */ + /* set the min alignment and padding */ blk_queue_update_dma_alignment(sdev->request_queue, ATA_DMA_PAD_SZ - 1); + blk_queue_dma_pad(sdev->request_queue, ATA_DMA_PAD_SZ - 1); /* configure draining */ buf = kmalloc(ATAPI_MAX_DRAIN, q->bounce_gfp | GFP_KERNEL); @@ -1694,12 +1695,17 @@ void ata_scsi_rbuf_fill(struct ata_scsi_args *args, u8 *rbuf; unsigned int buflen, rc; struct scsi_cmnd *cmd = args->cmd; + unsigned long flags; + + local_irq_save(flags); buflen = ata_scsi_rbuf_get(cmd, &rbuf); memset(rbuf, 0, buflen); rc = actor(args, rbuf, buflen); ata_scsi_rbuf_put(cmd, rbuf); + local_irq_restore(flags); + if (rc == 0) cmd->result = SAM_STAT_GOOD; args->done(cmd); @@ -2473,6 +2479,9 @@ static void atapi_qc_complete(struct ata_queued_cmd *qc) if ((scsicmd[0] == INQUIRY) && ((scsicmd[1] & 0x03) == 0)) { u8 *buf = NULL; unsigned int buflen; + unsigned long flags; + + local_irq_save(flags); buflen = ata_scsi_rbuf_get(cmd, &buf); @@ -2490,6 +2499,8 @@ static void atapi_qc_complete(struct ata_queued_cmd *qc) } ata_scsi_rbuf_put(cmd, buf); + + local_irq_restore(flags); } cmd->result = SAM_STAT_GOOD; @@ -2528,7 +2539,7 @@ static unsigned int atapi_xlat(struct ata_queued_cmd *qc) } qc->tf.command = ATA_CMD_PACKET; - qc->nbytes = scsi_bufflen(scmd); + qc->nbytes = scsi_bufflen(scmd) + scmd->request->extra_len; /* check whether ATAPI DMA is safe */ if (!using_pio && ata_check_atapi_dma(qc)) @@ -2539,7 +2550,7 @@ static unsigned int atapi_xlat(struct ata_queued_cmd *qc) * want to set it properly, and for DMA where it is * effectively meaningless. */ - nbytes = min(scmd->request->raw_data_len, (unsigned int)63 * 1024); + nbytes = min(scmd->request->data_len, (unsigned int)63 * 1024); /* Most ATAPI devices which honor transfer chunk size don't * behave according to the spec when odd chunk size which @@ -2865,7 +2876,7 @@ static unsigned int ata_scsi_pass_thru(struct ata_queued_cmd *qc) * TODO: find out if we need to do more here to * cover scatter/gather case. */ - qc->nbytes = scsi_bufflen(scmd); + qc->nbytes = scsi_bufflen(scmd) + scmd->request->extra_len; /* request result TF and be quiet about device error */ qc->flags |= ATA_QCFLAG_RESULT_TF | ATA_QCFLAG_QUIET; diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index 60cd4b179766..20dc572fb45a 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -56,7 +56,8 @@ u8 ata_irq_on(struct ata_port *ap) ap->ctl &= ~ATA_NIEN; ap->last_ctl = ap->ctl; - iowrite8(ap->ctl, ioaddr->ctl_addr); + if (ioaddr->ctl_addr) + iowrite8(ap->ctl, ioaddr->ctl_addr); tmp = ata_wait_idle(ap); ap->ops->irq_clear(ap); @@ -81,12 +82,14 @@ void ata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf) unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR; if (tf->ctl != ap->last_ctl) { - iowrite8(tf->ctl, ioaddr->ctl_addr); + if (ioaddr->ctl_addr) + iowrite8(tf->ctl, ioaddr->ctl_addr); ap->last_ctl = tf->ctl; ata_wait_idle(ap); } if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) { + WARN_ON(!ioaddr->ctl_addr); iowrite8(tf->hob_feature, ioaddr->feature_addr); iowrite8(tf->hob_nsect, ioaddr->nsect_addr); iowrite8(tf->hob_lbal, ioaddr->lbal_addr); @@ -167,14 +170,17 @@ void ata_tf_read(struct ata_port *ap, struct ata_taskfile *tf) tf->device = ioread8(ioaddr->device_addr); if (tf->flags & ATA_TFLAG_LBA48) { - iowrite8(tf->ctl | ATA_HOB, ioaddr->ctl_addr); - tf->hob_feature = ioread8(ioaddr->error_addr); - tf->hob_nsect = ioread8(ioaddr->nsect_addr); - tf->hob_lbal = ioread8(ioaddr->lbal_addr); - tf->hob_lbam = ioread8(ioaddr->lbam_addr); - tf->hob_lbah = ioread8(ioaddr->lbah_addr); - iowrite8(tf->ctl, ioaddr->ctl_addr); - ap->last_ctl = tf->ctl; + if (likely(ioaddr->ctl_addr)) { + iowrite8(tf->ctl | ATA_HOB, ioaddr->ctl_addr); + tf->hob_feature = ioread8(ioaddr->error_addr); + tf->hob_nsect = ioread8(ioaddr->nsect_addr); + tf->hob_lbal = ioread8(ioaddr->lbal_addr); + tf->hob_lbam = ioread8(ioaddr->lbam_addr); + tf->hob_lbah = ioread8(ioaddr->lbah_addr); + iowrite8(tf->ctl, ioaddr->ctl_addr); + ap->last_ctl = tf->ctl; + } else + WARN_ON(1); } } @@ -352,7 +358,8 @@ void ata_bmdma_freeze(struct ata_port *ap) ap->ctl |= ATA_NIEN; ap->last_ctl = ap->ctl; - iowrite8(ap->ctl, ioaddr->ctl_addr); + if (ioaddr->ctl_addr) + iowrite8(ap->ctl, ioaddr->ctl_addr); /* Under certain circumstances, some controllers raise IRQ on * ATA_NIEN manipulation. Also, many controllers fail to mask @@ -459,13 +466,14 @@ void ata_bmdma_drive_eh(struct ata_port *ap, ata_prereset_fn_t prereset, */ void ata_bmdma_error_handler(struct ata_port *ap) { - ata_reset_fn_t hardreset; + ata_reset_fn_t softreset = NULL, hardreset = NULL; - hardreset = NULL; + if (ap->ioaddr.ctl_addr) + softreset = ata_std_softreset; if (sata_scr_valid(&ap->link)) hardreset = sata_std_hardreset; - ata_bmdma_drive_eh(ap, ata_std_prereset, ata_std_softreset, hardreset, + ata_bmdma_drive_eh(ap, ata_std_prereset, softreset, hardreset, ata_std_postreset); } diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h index 6036dedfe377..aa884f71a12a 100644 --- a/drivers/ata/libata.h +++ b/drivers/ata/libata.h @@ -56,7 +56,6 @@ enum { extern unsigned int ata_print_id; extern struct workqueue_struct *ata_aux_wq; extern int atapi_enabled; -extern int atapi_dmadir; extern int atapi_passthru16; extern int libata_fua; extern int libata_noacpi; diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c index 0713872cf65c..a742efa0da2b 100644 --- a/drivers/ata/pata_hpt366.c +++ b/drivers/ata/pata_hpt366.c @@ -27,7 +27,7 @@ #include <linux/libata.h> #define DRV_NAME "pata_hpt366" -#define DRV_VERSION "0.6.1" +#define DRV_VERSION "0.6.2" struct hpt_clock { u8 xfer_speed; @@ -180,9 +180,9 @@ static unsigned long hpt366_filter(struct ata_device *adev, unsigned long mask) if (hpt_dma_blacklisted(adev, "UDMA", bad_ata33)) mask &= ~ATA_MASK_UDMA; if (hpt_dma_blacklisted(adev, "UDMA3", bad_ata66_3)) - mask &= ~(0x07 << ATA_SHIFT_UDMA); + mask &= ~(0xF8 << ATA_SHIFT_UDMA); if (hpt_dma_blacklisted(adev, "UDMA4", bad_ata66_4)) - mask &= ~(0x0F << ATA_SHIFT_UDMA); + mask &= ~(0xF0 << ATA_SHIFT_UDMA); } return ata_pci_default_filter(adev, mask); } diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c index 68eb34929cec..9a10878b2ad8 100644 --- a/drivers/ata/pata_hpt37x.c +++ b/drivers/ata/pata_hpt37x.c @@ -24,7 +24,7 @@ #include <linux/libata.h> #define DRV_NAME "pata_hpt37x" -#define DRV_VERSION "0.6.9" +#define DRV_VERSION "0.6.11" struct hpt_clock { u8 xfer_speed; @@ -281,7 +281,7 @@ static unsigned long hpt370_filter(struct ata_device *adev, unsigned long mask) if (hpt_dma_blacklisted(adev, "UDMA", bad_ata33)) mask &= ~ATA_MASK_UDMA; if (hpt_dma_blacklisted(adev, "UDMA100", bad_ata100_5)) - mask &= ~(0x1F << ATA_SHIFT_UDMA); + mask &= ~(0xE0 << ATA_SHIFT_UDMA); } return ata_pci_default_filter(adev, mask); } @@ -297,7 +297,7 @@ static unsigned long hpt370a_filter(struct ata_device *adev, unsigned long mask) { if (adev->class == ATA_DEV_ATA) { if (hpt_dma_blacklisted(adev, "UDMA100", bad_ata100_5)) - mask &= ~ (0x1F << ATA_SHIFT_UDMA); + mask &= ~(0xE0 << ATA_SHIFT_UDMA); } return ata_pci_default_filter(adev, mask); } diff --git a/drivers/ata/pata_pdc2027x.c b/drivers/ata/pata_pdc2027x.c index 028af5dbeed6..511c89b9bae8 100644 --- a/drivers/ata/pata_pdc2027x.c +++ b/drivers/ata/pata_pdc2027x.c @@ -39,7 +39,7 @@ #undef PDC_DEBUG #ifdef PDC_DEBUG -#define PDPRINTK(fmt, args...) printk(KERN_ERR "%s: " fmt, __FUNCTION__, ## args) +#define PDPRINTK(fmt, args...) printk(KERN_ERR "%s: " fmt, __func__, ## args) #else #define PDPRINTK(fmt, args...) #endif diff --git a/drivers/ata/pata_rb500_cf.c b/drivers/ata/pata_rb500_cf.c new file mode 100644 index 000000000000..4ce9b03fe6c8 --- /dev/null +++ b/drivers/ata/pata_rb500_cf.c @@ -0,0 +1,314 @@ +/* + * A low-level PATA driver to handle a Compact Flash connected on the + * Mikrotik's RouterBoard 532 board. + * + * Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org> + * Copyright (C) 2008 Florian Fainelli <florian@openwrt.org> + * + * This file was based on: drivers/ata/pata_ixp4xx_cf.c + * Copyright (C) 2006-07 Tower Technologies + * Author: Alessandro Zummo <a.zummo@towertech.it> + * + * Also was based on the driver for Linux 2.4.xx published by Mikrotik for + * their RouterBoard 1xx and 5xx series devices. The original Mikrotik code + * seems not to have a license. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> + +#include <linux/io.h> +#include <linux/interrupt.h> +#include <linux/irq.h> + +#include <linux/libata.h> +#include <scsi/scsi_host.h> + +#include <asm/gpio.h> + +#define DRV_NAME "pata-rb500-cf" +#define DRV_VERSION "0.1.0" +#define DRV_DESC "PATA driver for RouterBOARD 532 Compact Flash" + +#define RB500_CF_MAXPORTS 1 +#define RB500_CF_IO_DELAY 400 + +#define RB500_CF_REG_CMD 0x0800 +#define RB500_CF_REG_CTRL 0x080E +#define RB500_CF_REG_DATA 0x0C00 + +struct rb500_cf_info { + void __iomem *iobase; + unsigned int gpio_line; + int frozen; + unsigned int irq; +}; + +/* ------------------------------------------------------------------------ */ + +static inline void rb500_pata_finish_io(struct ata_port *ap) +{ + struct ata_host *ah = ap->host; + struct rb500_cf_info *info = ah->private_data; + + ata_altstatus(ap); + ndelay(RB500_CF_IO_DELAY); + + set_irq_type(info->irq, IRQ_TYPE_LEVEL_HIGH); +} + +static void rb500_pata_exec_command(struct ata_port *ap, + const struct ata_taskfile *tf) +{ + writeb(tf->command, ap->ioaddr.command_addr); + rb500_pata_finish_io(ap); +} + +static void rb500_pata_data_xfer(struct ata_device *adev, unsigned char *buf, + unsigned int buflen, int write_data) +{ + struct ata_port *ap = adev->link->ap; + void __iomem *ioaddr = ap->ioaddr.data_addr; + + if (write_data) { + for (; buflen > 0; buflen--, buf++) + writeb(*buf, ioaddr); + } else { + for (; buflen > 0; buflen--, buf++) + *buf = readb(ioaddr); + } + + rb500_pata_finish_io(adev->link->ap); +} + +static void rb500_pata_freeze(struct ata_port *ap) +{ + struct rb500_cf_info *info = ap->host->private_data; + + info->frozen = 1; +} + +static void rb500_pata_thaw(struct ata_port *ap) +{ + struct rb500_cf_info *info = ap->host->private_data; + + info->frozen = 0; +} + +static irqreturn_t rb500_pata_irq_handler(int irq, void *dev_instance) +{ + struct ata_host *ah = dev_instance; + struct rb500_cf_info *info = ah->private_data; + + if (gpio_get_value(info->gpio_line)) { + set_irq_type(info->irq, IRQ_TYPE_LEVEL_LOW); + if (!info->frozen) + ata_interrupt(info->irq, dev_instance); + } else { + set_irq_type(info->irq, IRQ_TYPE_LEVEL_HIGH); + } + + return IRQ_HANDLED; +} + +static void rb500_pata_irq_clear(struct ata_port *ap) +{ +} + +static int rb500_pata_port_start(struct ata_port *ap) +{ + return 0; +} + +static struct ata_port_operations rb500_pata_port_ops = { + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + + .exec_command = rb500_pata_exec_command, + .check_status = ata_check_status, + .dev_select = ata_std_dev_select, + + .data_xfer = rb500_pata_data_xfer, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + + .freeze = rb500_pata_freeze, + .thaw = rb500_pata_thaw, + .error_handler = ata_bmdma_error_handler, + + .irq_handler = rb500_pata_irq_handler, + .irq_clear = rb500_pata_irq_clear, + .irq_on = ata_irq_on, + + .port_start = rb500_pata_port_start, +}; + +/* ------------------------------------------------------------------------ */ + +static struct scsi_host_template rb500_pata_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, + .bios_param = ata_std_bios_param, + .proc_name = DRV_NAME, + + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .dma_boundary = ATA_DMA_BOUNDARY, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, +}; + +/* ------------------------------------------------------------------------ */ + +static void rb500_pata_setup_ports(struct ata_host *ah) +{ + struct rb500_cf_info *info = ah->private_data; + struct ata_port *ap; + + ap = ah->ports[0]; + + ap->ops = &rb500_pata_port_ops; + ap->pio_mask = 0x1f; /* PIO4 */ + ap->flags = ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO; + + ap->ioaddr.cmd_addr = info->iobase + RB500_CF_REG_CMD; + ap->ioaddr.ctl_addr = info->iobase + RB500_CF_REG_CTRL; + ap->ioaddr.altstatus_addr = info->iobase + RB500_CF_REG_CTRL; + + ata_std_ports(&ap->ioaddr); + + ap->ioaddr.data_addr = info->iobase + RB500_CF_REG_DATA; +} + +static __devinit int rb500_pata_driver_probe(struct platform_device *pdev) +{ + unsigned int irq; + int gpio; + struct resource *res; + struct ata_host *ah; + struct rb500_cf_info *info; + int ret; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "no IOMEM resource found\n"); + return -EINVAL; + } + + irq = platform_get_irq(pdev, 0); + if (irq <= 0) { + dev_err(&pdev->dev, "no IRQ resource found\n"); + return -ENOENT; + } + + gpio = irq_to_gpio(irq); + if (gpio < 0) { + dev_err(&pdev->dev, "no GPIO found for irq%d\n", irq); + return -ENOENT; + } + + ret = gpio_request(gpio, DRV_NAME); + if (ret) { + dev_err(&pdev->dev, "GPIO request failed\n"); + return ret; + } + + /* allocate host */ + ah = ata_host_alloc(&pdev->dev, RB500_CF_MAXPORTS); + if (!ah) + return -ENOMEM; + + platform_set_drvdata(pdev, ah); + + info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL); + if (!info) + return -ENOMEM; + + ah->private_data = info; + info->gpio_line = gpio; + info->irq = irq; + + info->iobase = devm_ioremap_nocache(&pdev->dev, res->start, + res->end - res->start + 1); + if (!info->iobase) + return -ENOMEM; + + ret = gpio_direction_input(gpio); + if (ret) { + dev_err(&pdev->dev, "unable to set GPIO direction, err=%d\n", + ret); + goto err_free_gpio; + } + + rb500_pata_setup_ports(ah); + + ret = ata_host_activate(ah, irq, rb500_pata_irq_handler, + IRQF_TRIGGER_LOW, &rb500_pata_sht); + if (ret) + goto err_free_gpio; + + return 0; + +err_free_gpio: + gpio_free(gpio); + + return ret; +} + +static __devexit int rb500_pata_driver_remove(struct platform_device *pdev) +{ + struct ata_host *ah = platform_get_drvdata(pdev); + struct rb500_cf_info *info = ah->private_data; + + ata_host_detach(ah); + gpio_free(info->gpio_line); + + return 0; +} + +static struct platform_driver rb500_pata_platform_driver = { + .probe = rb500_pata_driver_probe, + .remove = __devexit_p(rb500_pata_driver_remove), + .driver = { + .name = DRV_NAME, + .owner = THIS_MODULE, + }, +}; + +/* ------------------------------------------------------------------------ */ + +#define DRV_INFO DRV_DESC " version " DRV_VERSION + +static int __init rb500_pata_module_init(void) +{ + printk(KERN_INFO DRV_INFO "\n"); + + return platform_driver_register(&rb500_pata_platform_driver); +} + +static void __exit rb500_pata_module_exit(void) +{ + platform_driver_unregister(&rb500_pata_platform_driver); +} + +MODULE_AUTHOR("Gabor Juhos <juhosg at openwrt.org>"); +MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org>"); +MODULE_DESCRIPTION(DRV_DESC); +MODULE_VERSION(DRV_VERSION); +MODULE_LICENSE("GPL"); + +module_init(rb500_pata_module_init); +module_exit(rb500_pata_module_exit); diff --git a/drivers/ata/pata_serverworks.c b/drivers/ata/pata_serverworks.c index 9c523fbf529e..a589c0fa0dbb 100644 --- a/drivers/ata/pata_serverworks.c +++ b/drivers/ata/pata_serverworks.c @@ -226,7 +226,7 @@ static unsigned long serverworks_csb_filter(struct ata_device *adev, unsigned lo for (i = 0; (p = csb_bad_ata100[i]) != NULL; i++) { if (!strcmp(p, model_num)) - mask &= ~(0x1F << ATA_SHIFT_UDMA); + mask &= ~(0xE0 << ATA_SHIFT_UDMA); } return ata_pci_default_filter(adev, mask); } diff --git a/drivers/ata/sata_svw.c b/drivers/ata/sata_svw.c index 69f651e0bc98..840d1c4a7850 100644 --- a/drivers/ata/sata_svw.c +++ b/drivers/ata/sata_svw.c @@ -45,6 +45,8 @@ #include <linux/interrupt.h> #include <linux/device.h> #include <scsi/scsi_host.h> +#include <scsi/scsi_cmnd.h> +#include <scsi/scsi.h> #include <linux/libata.h> #ifdef CONFIG_PPC_OF @@ -59,6 +61,7 @@ enum { /* ap->flags bits */ K2_FLAG_SATA_8_PORTS = (1 << 24), K2_FLAG_NO_ATAPI_DMA = (1 << 25), + K2_FLAG_BAR_POS_3 = (1 << 26), /* Taskfile registers offsets */ K2_SATA_TF_CMD_OFFSET = 0x00, @@ -88,8 +91,10 @@ enum { /* Port stride */ K2_SATA_PORT_OFFSET = 0x100, - board_svw4 = 0, - board_svw8 = 1, + chip_svw4 = 0, + chip_svw8 = 1, + chip_svw42 = 2, /* bar 3 */ + chip_svw43 = 3, /* bar 5 */ }; static u8 k2_stat_check_status(struct ata_port *ap); @@ -97,10 +102,25 @@ static u8 k2_stat_check_status(struct ata_port *ap); static int k2_sata_check_atapi_dma(struct ata_queued_cmd *qc) { + u8 cmnd = qc->scsicmd->cmnd[0]; + if (qc->ap->flags & K2_FLAG_NO_ATAPI_DMA) return -1; /* ATAPI DMA not supported */ + else { + switch (cmnd) { + case READ_10: + case READ_12: + case READ_16: + case WRITE_10: + case WRITE_12: + case WRITE_16: + return 0; + + default: + return -1; + } - return 0; + } } static int k2_sata_scr_read(struct ata_port *ap, unsigned int sc_reg, u32 *val) @@ -354,7 +374,7 @@ static const struct ata_port_operations k2_sata_ops = { }; static const struct ata_port_info k2_port_info[] = { - /* board_svw4 */ + /* chip_svw4 */ { .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO | K2_FLAG_NO_ATAPI_DMA, @@ -363,7 +383,7 @@ static const struct ata_port_info k2_port_info[] = { .udma_mask = ATA_UDMA6, .port_ops = &k2_sata_ops, }, - /* board_svw8 */ + /* chip_svw8 */ { .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO | K2_FLAG_NO_ATAPI_DMA | @@ -373,6 +393,24 @@ static const struct ata_port_info k2_port_info[] = { .udma_mask = ATA_UDMA6, .port_ops = &k2_sata_ops, }, + /* chip_svw42 */ + { + .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | + ATA_FLAG_MMIO | K2_FLAG_BAR_POS_3, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = ATA_UDMA6, + .port_ops = &k2_sata_ops, + }, + /* chip_svw43 */ + { + .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | + ATA_FLAG_MMIO, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = ATA_UDMA6, + .port_ops = &k2_sata_ops, + }, }; static void k2_sata_setup_port(struct ata_ioports *port, void __iomem *base) @@ -402,7 +440,7 @@ static int k2_sata_init_one(struct pci_dev *pdev, const struct pci_device_id *en { &k2_port_info[ent->driver_data], NULL }; struct ata_host *host; void __iomem *mmio_base; - int n_ports, i, rc; + int n_ports, i, rc, bar_pos; if (!printed_version++) dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); @@ -416,6 +454,9 @@ static int k2_sata_init_one(struct pci_dev *pdev, const struct pci_device_id *en if (!host) return -ENOMEM; + bar_pos = 5; + if (ppi[0]->flags & K2_FLAG_BAR_POS_3) + bar_pos = 3; /* * If this driver happens to only be useful on Apple's K2, then * we should check that here as it has a normal Serverworks ID @@ -428,17 +469,23 @@ static int k2_sata_init_one(struct pci_dev *pdev, const struct pci_device_id *en * Check if we have resources mapped at all (second function may * have been disabled by firmware) */ - if (pci_resource_len(pdev, 5) == 0) + if (pci_resource_len(pdev, bar_pos) == 0) { + /* In IDE mode we need to pin the device to ensure that + pcim_release does not clear the busmaster bit in config + space, clearing causes busmaster DMA to fail on + ports 3 & 4 */ + pcim_pin_device(pdev); return -ENODEV; + } /* Request and iomap PCI regions */ - rc = pcim_iomap_regions(pdev, 1 << 5, DRV_NAME); + rc = pcim_iomap_regions(pdev, 1 << bar_pos, DRV_NAME); if (rc == -EBUSY) pcim_pin_device(pdev); if (rc) return rc; host->iomap = pcim_iomap_table(pdev); - mmio_base = host->iomap[5]; + mmio_base = host->iomap[bar_pos]; /* different controllers have different number of ports - currently 4 or 8 */ /* All ports are on the same function. Multi-function device is no @@ -483,11 +530,13 @@ static int k2_sata_init_one(struct pci_dev *pdev, const struct pci_device_id *en * controller * */ static const struct pci_device_id k2_sata_pci_tbl[] = { - { PCI_VDEVICE(SERVERWORKS, 0x0240), board_svw4 }, - { PCI_VDEVICE(SERVERWORKS, 0x0241), board_svw4 }, - { PCI_VDEVICE(SERVERWORKS, 0x0242), board_svw8 }, - { PCI_VDEVICE(SERVERWORKS, 0x024a), board_svw4 }, - { PCI_VDEVICE(SERVERWORKS, 0x024b), board_svw4 }, + { PCI_VDEVICE(SERVERWORKS, 0x0240), chip_svw4 }, + { PCI_VDEVICE(SERVERWORKS, 0x0241), chip_svw4 }, + { PCI_VDEVICE(SERVERWORKS, 0x0242), chip_svw8 }, + { PCI_VDEVICE(SERVERWORKS, 0x024a), chip_svw4 }, + { PCI_VDEVICE(SERVERWORKS, 0x024b), chip_svw4 }, + { PCI_VDEVICE(SERVERWORKS, 0x0410), chip_svw42 }, + { PCI_VDEVICE(SERVERWORKS, 0x0411), chip_svw43 }, { } }; diff --git a/drivers/atm/firestream.c b/drivers/atm/firestream.c index c662d686154a..47c57a4294b7 100644 --- a/drivers/atm/firestream.c +++ b/drivers/atm/firestream.c @@ -331,8 +331,8 @@ module_param(fs_keystream, int, 0); #define FS_DEBUG_QSIZE 0x00001000 -#define func_enter() fs_dprintk (FS_DEBUG_FLOW, "fs: enter %s\n", __FUNCTION__) -#define func_exit() fs_dprintk (FS_DEBUG_FLOW, "fs: exit %s\n", __FUNCTION__) +#define func_enter() fs_dprintk(FS_DEBUG_FLOW, "fs: enter %s\n", __func__) +#define func_exit() fs_dprintk(FS_DEBUG_FLOW, "fs: exit %s\n", __func__) static struct fs_dev *fs_boards = NULL; diff --git a/drivers/atm/fore200e.c b/drivers/atm/fore200e.c index f97e050338f0..9427a61f62b0 100644 --- a/drivers/atm/fore200e.c +++ b/drivers/atm/fore200e.c @@ -95,8 +95,8 @@ #if 1 #define ASSERT(expr) if (!(expr)) { \ printk(FORE200E "assertion failed! %s[%d]: %s\n", \ - __FUNCTION__, __LINE__, #expr); \ - panic(FORE200E "%s", __FUNCTION__); \ + __func__, __LINE__, #expr); \ + panic(FORE200E "%s", __func__); \ } #else #define ASSERT(expr) do {} while (0) diff --git a/drivers/atm/idt77252.c b/drivers/atm/idt77252.c index eee54c0cde68..b967919fb7e2 100644 --- a/drivers/atm/idt77252.c +++ b/drivers/atm/idt77252.c @@ -555,7 +555,7 @@ idt77252_tx_dump(struct idt77252_dev *card) struct vc_map *vc; int i; - printk("%s\n", __FUNCTION__); + printk("%s\n", __func__); for (i = 0; i < card->tct_size; i++) { vc = card->vcs[i]; if (!vc) @@ -1035,7 +1035,7 @@ dequeue_rx(struct idt77252_dev *card, struct rsq_entry *rsqe) skb = sb_pool_skb(card, le32_to_cpu(rsqe->word_2)); if (skb == NULL) { printk("%s: NULL skb in %s, rsqe: %08x %08x %08x %08x\n", - card->name, __FUNCTION__, + card->name, __func__, le32_to_cpu(rsqe->word_1), le32_to_cpu(rsqe->word_2), le32_to_cpu(rsqe->word_3), le32_to_cpu(rsqe->word_4)); return; @@ -1873,7 +1873,7 @@ add_rx_skb(struct idt77252_dev *card, int queue, return; if (sb_pool_add(card, skb, queue)) { - printk("%s: SB POOL full\n", __FUNCTION__); + printk("%s: SB POOL full\n", __func__); goto outfree; } @@ -1883,7 +1883,7 @@ add_rx_skb(struct idt77252_dev *card, int queue, IDT77252_PRV_PADDR(skb) = paddr; if (push_rx_skb(card, skb, queue)) { - printk("%s: FB QUEUE full\n", __FUNCTION__); + printk("%s: FB QUEUE full\n", __func__); goto outunmap; } } @@ -3821,12 +3821,12 @@ static int __init idt77252_init(void) { struct sk_buff *skb; - printk("%s: at %p\n", __FUNCTION__, idt77252_init); + printk("%s: at %p\n", __func__, idt77252_init); if (sizeof(skb->cb) < sizeof(struct atm_skb_data) + sizeof(struct idt77252_skb_prv)) { printk(KERN_ERR "%s: skb->cb is too small (%lu < %lu)\n", - __FUNCTION__, (unsigned long) sizeof(skb->cb), + __func__, (unsigned long) sizeof(skb->cb), (unsigned long) sizeof(struct atm_skb_data) + sizeof(struct idt77252_skb_prv)); return -EIO; diff --git a/drivers/base/core.c b/drivers/base/core.c index 9c0070b5bd3e..7de543d1d0b4 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -621,7 +621,8 @@ static struct kobject *get_device_parent(struct device *dev, static void cleanup_glue_dir(struct device *dev, struct kobject *glue_dir) { /* see if we live in a "glue" directory */ - if (!dev->class || glue_dir->kset != &dev->class->class_dirs) + if (!glue_dir || !dev->class || + glue_dir->kset != &dev->class->class_dirs) return; kobject_put(glue_dir); @@ -770,17 +771,10 @@ int device_add(struct device *dev) struct class_interface *class_intf; int error; - error = pm_sleep_lock(); - if (error) { - dev_warn(dev, "Suspicious %s during suspend\n", __FUNCTION__); - dump_stack(); - return error; - } - dev = get_device(dev); if (!dev || !strlen(dev->bus_id)) { error = -EINVAL; - goto Error; + goto Done; } pr_debug("device: '%s': %s\n", dev->bus_id, __FUNCTION__); @@ -843,11 +837,9 @@ int device_add(struct device *dev) } Done: put_device(dev); - pm_sleep_unlock(); return error; BusError: device_pm_remove(dev); - dpm_sysfs_remove(dev); PMError: if (dev->bus) blocking_notifier_call_chain(&dev->bus->p->bus_notifier, diff --git a/drivers/base/platform.c b/drivers/base/platform.c index efaf282c438c..911ec600fe71 100644 --- a/drivers/base/platform.c +++ b/drivers/base/platform.c @@ -648,7 +648,7 @@ u64 dma_get_required_mask(struct device *dev) high_totalram += high_totalram - 1; mask = (((u64)high_totalram) << 32) + 0xffffffff; } - return mask & *dev->dma_mask; + return mask; } EXPORT_SYMBOL_GPL(dma_get_required_mask); #endif diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c index ee9d1c8db0d6..d887d5cb5bef 100644 --- a/drivers/base/power/main.c +++ b/drivers/base/power/main.c @@ -48,7 +48,6 @@ */ LIST_HEAD(dpm_active); -static LIST_HEAD(dpm_locked); static LIST_HEAD(dpm_off); static LIST_HEAD(dpm_off_irq); static LIST_HEAD(dpm_destroy); @@ -81,28 +80,6 @@ void device_pm_add(struct device *dev) */ void device_pm_remove(struct device *dev) { - /* - * If this function is called during a suspend, it will be blocked, - * because we're holding the device's semaphore at that time, which may - * lead to a deadlock. In that case we want to print a warning. - * However, it may also be called by unregister_dropped_devices() with - * the device's semaphore released, in which case the warning should - * not be printed. - */ - if (down_trylock(&dev->sem)) { - if (down_read_trylock(&pm_sleep_rwsem)) { - /* No suspend in progress, wait on dev->sem */ - down(&dev->sem); - up_read(&pm_sleep_rwsem); - } else { - /* Suspend in progress, we may deadlock */ - dev_warn(dev, "Suspicious %s during suspend\n", - __FUNCTION__); - dump_stack(); - /* The user has been warned ... */ - down(&dev->sem); - } - } pr_debug("PM: Removing info for %s:%s\n", dev->bus ? dev->bus->name : "No Bus", kobject_name(&dev->kobj)); @@ -110,7 +87,6 @@ void device_pm_remove(struct device *dev) dpm_sysfs_remove(dev); list_del_init(&dev->power.entry); mutex_unlock(&dpm_list_mtx); - up(&dev->sem); } /** @@ -230,6 +206,8 @@ static int resume_device(struct device *dev) TRACE_DEVICE(dev); TRACE_RESUME(0); + down(&dev->sem); + if (dev->bus && dev->bus->resume) { dev_dbg(dev,"resuming\n"); error = dev->bus->resume(dev); @@ -245,6 +223,8 @@ static int resume_device(struct device *dev) error = dev->class->resume(dev); } + up(&dev->sem); + TRACE_RESUME(error); return error; } @@ -266,7 +246,7 @@ static void dpm_resume(void) struct list_head *entry = dpm_off.next; struct device *dev = to_device(entry); - list_move_tail(entry, &dpm_locked); + list_move_tail(entry, &dpm_active); mutex_unlock(&dpm_list_mtx); resume_device(dev); mutex_lock(&dpm_list_mtx); @@ -275,25 +255,6 @@ static void dpm_resume(void) } /** - * unlock_all_devices - Release each device's semaphore - * - * Go through the dpm_off list. Put each device on the dpm_active - * list and unlock it. - */ -static void unlock_all_devices(void) -{ - mutex_lock(&dpm_list_mtx); - while (!list_empty(&dpm_locked)) { - struct list_head *entry = dpm_locked.prev; - struct device *dev = to_device(entry); - - list_move(entry, &dpm_active); - up(&dev->sem); - } - mutex_unlock(&dpm_list_mtx); -} - -/** * unregister_dropped_devices - Unregister devices scheduled for removal * * Unregister all devices on the dpm_destroy list. @@ -305,7 +266,6 @@ static void unregister_dropped_devices(void) struct list_head *entry = dpm_destroy.next; struct device *dev = to_device(entry); - up(&dev->sem); mutex_unlock(&dpm_list_mtx); /* This also removes the device from the list */ device_unregister(dev); @@ -324,7 +284,6 @@ void device_resume(void) { might_sleep(); dpm_resume(); - unlock_all_devices(); unregister_dropped_devices(); up_write(&pm_sleep_rwsem); } @@ -388,18 +347,15 @@ int device_power_down(pm_message_t state) struct list_head *entry = dpm_off.prev; struct device *dev = to_device(entry); - list_del_init(&dev->power.entry); error = suspend_device_late(dev, state); if (error) { printk(KERN_ERR "Could not power down device %s: " "error %d\n", kobject_name(&dev->kobj), error); - if (list_empty(&dev->power.entry)) - list_add(&dev->power.entry, &dpm_off); break; } - if (list_empty(&dev->power.entry)) - list_add(&dev->power.entry, &dpm_off_irq); + if (!list_empty(&dev->power.entry)) + list_move(&dev->power.entry, &dpm_off_irq); } if (!error) @@ -419,6 +375,8 @@ static int suspend_device(struct device *dev, pm_message_t state) { int error = 0; + down(&dev->sem); + if (dev->power.power_state.event) { dev_dbg(dev, "PM: suspend %d-->%d\n", dev->power.power_state.event, state.event); @@ -441,6 +399,9 @@ static int suspend_device(struct device *dev, pm_message_t state) error = dev->bus->suspend(dev, state); suspend_report_result(dev->bus->suspend, error); } + + up(&dev->sem); + return error; } @@ -461,13 +422,13 @@ static int dpm_suspend(pm_message_t state) int error = 0; mutex_lock(&dpm_list_mtx); - while (!list_empty(&dpm_locked)) { - struct list_head *entry = dpm_locked.prev; + while (!list_empty(&dpm_active)) { + struct list_head *entry = dpm_active.prev; struct device *dev = to_device(entry); - list_del_init(&dev->power.entry); mutex_unlock(&dpm_list_mtx); error = suspend_device(dev, state); + mutex_lock(&dpm_list_mtx); if (error) { printk(KERN_ERR "Could not suspend device %s: " "error %d%s\n", @@ -476,14 +437,10 @@ static int dpm_suspend(pm_message_t state) (error == -EAGAIN ? " (please convert to suspend_late)" : "")); - mutex_lock(&dpm_list_mtx); - if (list_empty(&dev->power.entry)) - list_add(&dev->power.entry, &dpm_locked); break; } - mutex_lock(&dpm_list_mtx); - if (list_empty(&dev->power.entry)) - list_add(&dev->power.entry, &dpm_off); + if (!list_empty(&dev->power.entry)) + list_move(&dev->power.entry, &dpm_off); } mutex_unlock(&dpm_list_mtx); @@ -491,36 +448,6 @@ static int dpm_suspend(pm_message_t state) } /** - * lock_all_devices - Acquire every device's semaphore - * - * Go through the dpm_active list. Carefully lock each device's - * semaphore and put it in on the dpm_locked list. - */ -static void lock_all_devices(void) -{ - mutex_lock(&dpm_list_mtx); - while (!list_empty(&dpm_active)) { - struct list_head *entry = dpm_active.next; - struct device *dev = to_device(entry); - - /* Required locking order is dev->sem first, - * then dpm_list_mutex. Hence this awkward code. - */ - get_device(dev); - mutex_unlock(&dpm_list_mtx); - down(&dev->sem); - mutex_lock(&dpm_list_mtx); - - if (list_empty(entry)) - up(&dev->sem); /* Device was removed */ - else - list_move_tail(entry, &dpm_locked); - put_device(dev); - } - mutex_unlock(&dpm_list_mtx); -} - -/** * device_suspend - Save state and stop all devices in system. * @state: new power management state * @@ -533,7 +460,6 @@ int device_suspend(pm_message_t state) might_sleep(); down_write(&pm_sleep_rwsem); - lock_all_devices(); error = dpm_suspend(state); if (error) device_resume(); diff --git a/drivers/base/sys.c b/drivers/base/sys.c index 2f79c55acdcc..8e13fd942163 100644 --- a/drivers/base/sys.c +++ b/drivers/base/sys.c @@ -133,6 +133,7 @@ int sysdev_class_register(struct sysdev_class * cls) pr_debug("Registering sysdev class '%s'\n", kobject_name(&cls->kset.kobj)); INIT_LIST_HEAD(&cls->drivers); + memset(&cls->kset.kobj, 0x00, sizeof(struct kobject)); cls->kset.kobj.parent = &system_kset->kobj; cls->kset.kobj.ktype = &ktype_sysdev_class; cls->kset.kobj.kset = system_kset; @@ -227,6 +228,9 @@ int sysdev_register(struct sys_device * sysdev) pr_debug("Registering sys device '%s'\n", kobject_name(&sysdev->kobj)); + /* initialize the kobject to 0, in case it had previously been used */ + memset(&sysdev->kobj, 0x00, sizeof(struct kobject)); + /* Make sure the kset is set */ sysdev->kobj.kset = &cls->kset; diff --git a/drivers/base/transport_class.c b/drivers/base/transport_class.c index f25e7c6b2d27..40bca48abc12 100644 --- a/drivers/base/transport_class.c +++ b/drivers/base/transport_class.c @@ -126,9 +126,7 @@ static int transport_setup_classdev(struct attribute_container *cont, } /** - * transport_setup_device - declare a new dev for transport class association - * but don't make it visible yet. - * + * transport_setup_device - declare a new dev for transport class association but don't make it visible yet. * @dev: the generic device representing the entity being added * * Usually, dev represents some component in the HBA system (either diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index 9715be3f2487..55bd35c0f082 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -33,6 +33,7 @@ #include <linux/blkpg.h> #include <linux/timer.h> #include <linux/proc_fs.h> +#include <linux/seq_file.h> #include <linux/init.h> #include <linux/hdreg.h> #include <linux/spinlock.h> @@ -131,7 +132,6 @@ static struct board_type products[] = { /*define how many times we will try a command because of bus resets */ #define MAX_CMD_RETRIES 3 -#define READ_AHEAD 1024 #define MAX_CTLR 32 /* Originally cciss driver only supports 8 major numbers */ @@ -174,8 +174,6 @@ static int sendcmd_withirq(__u8 cmd, int ctlr, void *buff, size_t size, static void fail_all_cmds(unsigned long ctlr); #ifdef CONFIG_PROC_FS -static int cciss_proc_get_info(char *buffer, char **start, off_t offset, - int length, int *eof, void *data); static void cciss_procinit(int i); #else static void cciss_procinit(int i) @@ -240,24 +238,46 @@ static inline CommandList_struct *removeQ(CommandList_struct **Qptr, */ #define ENG_GIG 1000000000 #define ENG_GIG_FACTOR (ENG_GIG/512) +#define ENGAGE_SCSI "engage scsi" static const char *raid_label[] = { "0", "4", "1(1+0)", "5", "5+1", "ADG", "UNKNOWN" }; static struct proc_dir_entry *proc_cciss; -static int cciss_proc_get_info(char *buffer, char **start, off_t offset, - int length, int *eof, void *data) +static void cciss_seq_show_header(struct seq_file *seq) { - off_t pos = 0; - off_t len = 0; - int size, i, ctlr; - ctlr_info_t *h = (ctlr_info_t *) data; - drive_info_struct *drv; - unsigned long flags; - sector_t vol_sz, vol_sz_frac; + ctlr_info_t *h = seq->private; + + seq_printf(seq, "%s: HP %s Controller\n" + "Board ID: 0x%08lx\n" + "Firmware Version: %c%c%c%c\n" + "IRQ: %d\n" + "Logical drives: %d\n" + "Current Q depth: %d\n" + "Current # commands on controller: %d\n" + "Max Q depth since init: %d\n" + "Max # commands on controller since init: %d\n" + "Max SG entries since init: %d\n", + h->devname, + h->product_name, + (unsigned long)h->board_id, + h->firm_ver[0], h->firm_ver[1], h->firm_ver[2], + h->firm_ver[3], (unsigned int)h->intr[SIMPLE_MODE_INT], + h->num_luns, + h->Qdepth, h->commands_outstanding, + h->maxQsinceinit, h->max_outstanding, h->maxSG); - ctlr = h->ctlr; +#ifdef CONFIG_CISS_SCSI_TAPE + cciss_seq_tape_report(seq, h->ctlr); +#endif /* CONFIG_CISS_SCSI_TAPE */ +} + +static void *cciss_seq_start(struct seq_file *seq, loff_t *pos) +{ + ctlr_info_t *h = seq->private; + unsigned ctlr = h->ctlr; + unsigned long flags; /* prevent displaying bogus info during configuration * or deconfiguration of a logical volume @@ -265,115 +285,155 @@ static int cciss_proc_get_info(char *buffer, char **start, off_t offset, spin_lock_irqsave(CCISS_LOCK(ctlr), flags); if (h->busy_configuring) { spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags); - return -EBUSY; + return ERR_PTR(-EBUSY); } h->busy_configuring = 1; spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags); - size = sprintf(buffer, "%s: HP %s Controller\n" - "Board ID: 0x%08lx\n" - "Firmware Version: %c%c%c%c\n" - "IRQ: %d\n" - "Logical drives: %d\n" - "Max sectors: %d\n" - "Current Q depth: %d\n" - "Current # commands on controller: %d\n" - "Max Q depth since init: %d\n" - "Max # commands on controller since init: %d\n" - "Max SG entries since init: %d\n\n", - h->devname, - h->product_name, - (unsigned long)h->board_id, - h->firm_ver[0], h->firm_ver[1], h->firm_ver[2], - h->firm_ver[3], (unsigned int)h->intr[SIMPLE_MODE_INT], - h->num_luns, - h->cciss_max_sectors, - h->Qdepth, h->commands_outstanding, - h->maxQsinceinit, h->max_outstanding, h->maxSG); - - pos += size; - len += size; - cciss_proc_tape_report(ctlr, buffer, &pos, &len); - for (i = 0; i <= h->highest_lun; i++) { - - drv = &h->drv[i]; - if (drv->heads == 0) - continue; + if (*pos == 0) + cciss_seq_show_header(seq); - vol_sz = drv->nr_blocks; - vol_sz_frac = sector_div(vol_sz, ENG_GIG_FACTOR); - vol_sz_frac *= 100; - sector_div(vol_sz_frac, ENG_GIG_FACTOR); + return pos; +} + +static int cciss_seq_show(struct seq_file *seq, void *v) +{ + sector_t vol_sz, vol_sz_frac; + ctlr_info_t *h = seq->private; + unsigned ctlr = h->ctlr; + loff_t *pos = v; + drive_info_struct *drv = &h->drv[*pos]; + + if (*pos > h->highest_lun) + return 0; + + if (drv->heads == 0) + return 0; + + vol_sz = drv->nr_blocks; + vol_sz_frac = sector_div(vol_sz, ENG_GIG_FACTOR); + vol_sz_frac *= 100; + sector_div(vol_sz_frac, ENG_GIG_FACTOR); + + if (drv->raid_level > 5) + drv->raid_level = RAID_UNKNOWN; + seq_printf(seq, "cciss/c%dd%d:" + "\t%4u.%02uGB\tRAID %s\n", + ctlr, (int) *pos, (int)vol_sz, (int)vol_sz_frac, + raid_label[drv->raid_level]); + return 0; +} + +static void *cciss_seq_next(struct seq_file *seq, void *v, loff_t *pos) +{ + ctlr_info_t *h = seq->private; + + if (*pos > h->highest_lun) + return NULL; + *pos += 1; + + return pos; +} + +static void cciss_seq_stop(struct seq_file *seq, void *v) +{ + ctlr_info_t *h = seq->private; + + /* Only reset h->busy_configuring if we succeeded in setting + * it during cciss_seq_start. */ + if (v == ERR_PTR(-EBUSY)) + return; - if (drv->raid_level > 5) - drv->raid_level = RAID_UNKNOWN; - size = sprintf(buffer + len, "cciss/c%dd%d:" - "\t%4u.%02uGB\tRAID %s\n", - ctlr, i, (int)vol_sz, (int)vol_sz_frac, - raid_label[drv->raid_level]); - pos += size; - len += size; - } - - *eof = 1; - *start = buffer + offset; - len -= offset; - if (len > length) - len = length; h->busy_configuring = 0; - return len; } -static int -cciss_proc_write(struct file *file, const char __user *buffer, - unsigned long count, void *data) +static struct seq_operations cciss_seq_ops = { + .start = cciss_seq_start, + .show = cciss_seq_show, + .next = cciss_seq_next, + .stop = cciss_seq_stop, +}; + +static int cciss_seq_open(struct inode *inode, struct file *file) { - unsigned char cmd[80]; - int len; -#ifdef CONFIG_CISS_SCSI_TAPE - ctlr_info_t *h = (ctlr_info_t *) data; - int rc; + int ret = seq_open(file, &cciss_seq_ops); + struct seq_file *seq = file->private_data; + + if (!ret) + seq->private = PDE(inode)->data; + + return ret; +} + +static ssize_t +cciss_proc_write(struct file *file, const char __user *buf, + size_t length, loff_t *ppos) +{ + int err; + char *buffer; + +#ifndef CONFIG_CISS_SCSI_TAPE + return -EINVAL; #endif - if (count > sizeof(cmd) - 1) + if (!buf || length > PAGE_SIZE - 1) return -EINVAL; - if (copy_from_user(cmd, buffer, count)) - return -EFAULT; - cmd[count] = '\0'; - len = strlen(cmd); // above 3 lines ensure safety - if (len && cmd[len - 1] == '\n') - cmd[--len] = '\0'; -# ifdef CONFIG_CISS_SCSI_TAPE - if (strcmp("engage scsi", cmd) == 0) { + + buffer = (char *)__get_free_page(GFP_KERNEL); + if (!buffer) + return -ENOMEM; + + err = -EFAULT; + if (copy_from_user(buffer, buf, length)) + goto out; + buffer[length] = '\0'; + +#ifdef CONFIG_CISS_SCSI_TAPE + if (strncmp(ENGAGE_SCSI, buffer, sizeof ENGAGE_SCSI - 1) == 0) { + struct seq_file *seq = file->private_data; + ctlr_info_t *h = seq->private; + int rc; + rc = cciss_engage_scsi(h->ctlr); if (rc != 0) - return -rc; - return count; - } + err = -rc; + else + err = length; + } else +#endif /* CONFIG_CISS_SCSI_TAPE */ + err = -EINVAL; /* might be nice to have "disengage" too, but it's not safely possible. (only 1 module use count, lock issues.) */ -# endif - return -EINVAL; + +out: + free_page((unsigned long)buffer); + return err; } -/* - * Get us a file in /proc/cciss that says something about each controller. - * Create /proc/cciss if it doesn't exist yet. - */ +static struct file_operations cciss_proc_fops = { + .owner = THIS_MODULE, + .open = cciss_seq_open, + .read = seq_read, + .llseek = seq_lseek, + .release = seq_release, + .write = cciss_proc_write, +}; + static void __devinit cciss_procinit(int i) { struct proc_dir_entry *pde; - if (proc_cciss == NULL) { + if (proc_cciss == NULL) proc_cciss = proc_mkdir("cciss", proc_root_driver); - if (!proc_cciss) - return; - } + if (!proc_cciss) + return; + pde = proc_create(hba[i]->devname, S_IWUSR | S_IRUSR | S_IRGRP | + S_IROTH, proc_cciss, + &cciss_proc_fops); + if (!pde) + return; - pde = create_proc_read_entry(hba[i]->devname, - S_IWUSR | S_IRUSR | S_IRGRP | S_IROTH, - proc_cciss, cciss_proc_get_info, hba[i]); - pde->write_proc = cciss_proc_write; + pde->data = hba[i]; } #endif /* CONFIG_PROC_FS */ @@ -1341,7 +1401,6 @@ geo_inq: disk->private_data = &h->drv[drv_index]; /* Set up queue information */ - disk->queue->backing_dev_info.ra_pages = READ_AHEAD; blk_queue_bounce_limit(disk->queue, hba[ctlr]->pdev->dma_mask); /* This is a hardware imposed limit. */ @@ -3434,7 +3493,6 @@ static int __devinit cciss_init_one(struct pci_dev *pdev, } drv->queue = q; - q->backing_dev_info.ra_pages = READ_AHEAD; blk_queue_bounce_limit(q, hba[i]->pdev->dma_mask); /* This is a hardware imposed limit. */ diff --git a/drivers/block/cciss_scsi.c b/drivers/block/cciss_scsi.c index 55178e9973a0..45ac09300eb3 100644 --- a/drivers/block/cciss_scsi.c +++ b/drivers/block/cciss_scsi.c @@ -1404,21 +1404,18 @@ cciss_engage_scsi(int ctlr) } static void -cciss_proc_tape_report(int ctlr, unsigned char *buffer, off_t *pos, off_t *len) +cciss_seq_tape_report(struct seq_file *seq, int ctlr) { unsigned long flags; - int size; - - *pos = *pos -1; *len = *len - 1; // cut off the last trailing newline CPQ_TAPE_LOCK(ctlr, flags); - size = sprintf(buffer + *len, + seq_printf(seq, "Sequential access devices: %d\n\n", ccissscsi[ctlr].ndevices); CPQ_TAPE_UNLOCK(ctlr, flags); - *pos += size; *len += size; } + /* Need at least one of these error handlers to keep ../scsi/hosts.c from * complaining. Doing a host- or bus-reset can't do anything good here. * Despite what it might say in scsi_error.c, there may well be commands @@ -1498,6 +1495,5 @@ static int cciss_eh_abort_handler(struct scsi_cmnd *scsicmd) #define cciss_scsi_setup(cntl_num) #define cciss_unregister_scsi(ctlr) #define cciss_register_scsi(ctlr) -#define cciss_proc_tape_report(ctlr, buffer, pos, len) #endif /* CONFIG_CISS_SCSI_TAPE */ diff --git a/drivers/block/pktcdvd.c b/drivers/block/pktcdvd.c index 674cd66dcaba..18feb1c7c33b 100644 --- a/drivers/block/pktcdvd.c +++ b/drivers/block/pktcdvd.c @@ -849,7 +849,8 @@ static int pkt_flush_cache(struct pktcdvd_device *pd) /* * speed is given as the normal factor, e.g. 4 for 4x */ -static int pkt_set_speed(struct pktcdvd_device *pd, unsigned write_speed, unsigned read_speed) +static noinline_for_stack int pkt_set_speed(struct pktcdvd_device *pd, + unsigned write_speed, unsigned read_speed) { struct packet_command cgc; struct request_sense sense; @@ -1776,7 +1777,8 @@ static int pkt_get_track_info(struct pktcdvd_device *pd, __u16 track, __u8 type, return pkt_generic_packet(pd, &cgc); } -static int pkt_get_last_written(struct pktcdvd_device *pd, long *last_written) +static noinline_for_stack int pkt_get_last_written(struct pktcdvd_device *pd, + long *last_written) { disc_information di; track_information ti; @@ -1813,7 +1815,7 @@ static int pkt_get_last_written(struct pktcdvd_device *pd, long *last_written) /* * write mode select package based on pd->settings */ -static int pkt_set_write_settings(struct pktcdvd_device *pd) +static noinline_for_stack int pkt_set_write_settings(struct pktcdvd_device *pd) { struct packet_command cgc; struct request_sense sense; @@ -1972,7 +1974,7 @@ static int pkt_writable_disc(struct pktcdvd_device *pd, disc_information *di) return 1; } -static int pkt_probe_settings(struct pktcdvd_device *pd) +static noinline_for_stack int pkt_probe_settings(struct pktcdvd_device *pd) { struct packet_command cgc; unsigned char buf[12]; @@ -2071,7 +2073,8 @@ static int pkt_probe_settings(struct pktcdvd_device *pd) /* * enable/disable write caching on drive */ -static int pkt_write_caching(struct pktcdvd_device *pd, int set) +static noinline_for_stack int pkt_write_caching(struct pktcdvd_device *pd, + int set) { struct packet_command cgc; struct request_sense sense; @@ -2116,7 +2119,8 @@ static int pkt_lock_door(struct pktcdvd_device *pd, int lockflag) /* * Returns drive maximum write speed */ -static int pkt_get_max_speed(struct pktcdvd_device *pd, unsigned *write_speed) +static noinline_for_stack int pkt_get_max_speed(struct pktcdvd_device *pd, + unsigned *write_speed) { struct packet_command cgc; struct request_sense sense; @@ -2177,7 +2181,8 @@ static char us_clv_to_speed[16] = { /* * reads the maximum media speed from ATIP */ -static int pkt_media_speed(struct pktcdvd_device *pd, unsigned *speed) +static noinline_for_stack int pkt_media_speed(struct pktcdvd_device *pd, + unsigned *speed) { struct packet_command cgc; struct request_sense sense; @@ -2249,7 +2254,7 @@ static int pkt_media_speed(struct pktcdvd_device *pd, unsigned *speed) } } -static int pkt_perform_opc(struct pktcdvd_device *pd) +static noinline_for_stack int pkt_perform_opc(struct pktcdvd_device *pd) { struct packet_command cgc; struct request_sense sense; diff --git a/drivers/block/viodasd.c b/drivers/block/viodasd.c index 9e61fca46117..41ca721d2523 100644 --- a/drivers/block/viodasd.c +++ b/drivers/block/viodasd.c @@ -528,8 +528,7 @@ static int block_event_to_scatterlist(const struct vioblocklpevent *bevent, numsg = VIOMAXBLOCKDMA; *total_len = 0; - memset(sg, 0, sizeof(sg[0]) * VIOMAXBLOCKDMA); - + sg_init_table(sg, VIOMAXBLOCKDMA); for (i = 0; (i < numsg) && (rw_data->dma_info[i].len > 0); ++i) { sg_dma_address(&sg[i]) = rw_data->dma_info[i].token; sg_dma_len(&sg[i]) = rw_data->dma_info[i].len; diff --git a/drivers/bluetooth/hci_usb.c b/drivers/bluetooth/hci_usb.c index 372c7ef633da..8b884f87d8b7 100644 --- a/drivers/bluetooth/hci_usb.c +++ b/drivers/bluetooth/hci_usb.c @@ -116,6 +116,7 @@ static struct usb_device_id blacklist_ids[] = { { USB_DEVICE(0x0a5c, 0x2009), .driver_info = HCI_BCM92035 }, /* Broadcom BCM2045 */ + { USB_DEVICE(0x0a5c, 0x2039), .driver_info = HCI_RESET | HCI_WRONG_SCO_MTU }, { USB_DEVICE(0x0a5c, 0x2101), .driver_info = HCI_RESET | HCI_WRONG_SCO_MTU }, /* IBM/Lenovo ThinkPad with Broadcom chip */ @@ -148,6 +149,9 @@ static struct usb_device_id blacklist_ids[] = { { USB_DEVICE(0x0400, 0x0807), .driver_info = HCI_BROKEN_ISOC }, { USB_DEVICE(0x0400, 0x080a), .driver_info = HCI_BROKEN_ISOC }, + /* CONWISE Technology based adapters with buggy SCO support */ + { USB_DEVICE(0x0e5e, 0x6622), .driver_info = HCI_BROKEN_ISOC }, + /* Belkin F8T012 and F8T013 devices */ { USB_DEVICE(0x050d, 0x0012), .driver_info = HCI_RESET | HCI_WRONG_SCO_MTU }, { USB_DEVICE(0x050d, 0x0013), .driver_info = HCI_RESET | HCI_WRONG_SCO_MTU }, diff --git a/drivers/cdrom/cdrom.c b/drivers/cdrom/cdrom.c index db259e60289b..12f5baea439b 100644 --- a/drivers/cdrom/cdrom.c +++ b/drivers/cdrom/cdrom.c @@ -1152,8 +1152,8 @@ clean_up_and_return: /* This code is similar to that in open_for_data. The routine is called whenever an audio play operation is requested. */ -int check_for_audio_disc(struct cdrom_device_info * cdi, - struct cdrom_device_ops * cdo) +static int check_for_audio_disc(struct cdrom_device_info * cdi, + struct cdrom_device_ops * cdo) { int ret; tracktype tracks; diff --git a/drivers/char/defkeymap.c_shipped b/drivers/char/defkeymap.c_shipped index 0aa419a61767..d2208dfe3f67 100644 --- a/drivers/char/defkeymap.c_shipped +++ b/drivers/char/defkeymap.c_shipped @@ -223,40 +223,40 @@ char *func_table[MAX_NR_FUNC] = { }; struct kbdiacruc accent_table[MAX_DIACR] = { - {'`', 'A', '\300'}, {'`', 'a', '\340'}, - {'\'', 'A', '\301'}, {'\'', 'a', '\341'}, - {'^', 'A', '\302'}, {'^', 'a', '\342'}, - {'~', 'A', '\303'}, {'~', 'a', '\343'}, - {'"', 'A', '\304'}, {'"', 'a', '\344'}, - {'O', 'A', '\305'}, {'o', 'a', '\345'}, - {'0', 'A', '\305'}, {'0', 'a', '\345'}, - {'A', 'A', '\305'}, {'a', 'a', '\345'}, - {'A', 'E', '\306'}, {'a', 'e', '\346'}, - {',', 'C', '\307'}, {',', 'c', '\347'}, - {'`', 'E', '\310'}, {'`', 'e', '\350'}, - {'\'', 'E', '\311'}, {'\'', 'e', '\351'}, - {'^', 'E', '\312'}, {'^', 'e', '\352'}, - {'"', 'E', '\313'}, {'"', 'e', '\353'}, - {'`', 'I', '\314'}, {'`', 'i', '\354'}, - {'\'', 'I', '\315'}, {'\'', 'i', '\355'}, - {'^', 'I', '\316'}, {'^', 'i', '\356'}, - {'"', 'I', '\317'}, {'"', 'i', '\357'}, - {'-', 'D', '\320'}, {'-', 'd', '\360'}, - {'~', 'N', '\321'}, {'~', 'n', '\361'}, - {'`', 'O', '\322'}, {'`', 'o', '\362'}, - {'\'', 'O', '\323'}, {'\'', 'o', '\363'}, - {'^', 'O', '\324'}, {'^', 'o', '\364'}, - {'~', 'O', '\325'}, {'~', 'o', '\365'}, - {'"', 'O', '\326'}, {'"', 'o', '\366'}, - {'/', 'O', '\330'}, {'/', 'o', '\370'}, - {'`', 'U', '\331'}, {'`', 'u', '\371'}, - {'\'', 'U', '\332'}, {'\'', 'u', '\372'}, - {'^', 'U', '\333'}, {'^', 'u', '\373'}, - {'"', 'U', '\334'}, {'"', 'u', '\374'}, - {'\'', 'Y', '\335'}, {'\'', 'y', '\375'}, - {'T', 'H', '\336'}, {'t', 'h', '\376'}, - {'s', 's', '\337'}, {'"', 'y', '\377'}, - {'s', 'z', '\337'}, {'i', 'j', '\377'}, + {'`', 'A', 0300}, {'`', 'a', 0340}, + {'\'', 'A', 0301}, {'\'', 'a', 0341}, + {'^', 'A', 0302}, {'^', 'a', 0342}, + {'~', 'A', 0303}, {'~', 'a', 0343}, + {'"', 'A', 0304}, {'"', 'a', 0344}, + {'O', 'A', 0305}, {'o', 'a', 0345}, + {'0', 'A', 0305}, {'0', 'a', 0345}, + {'A', 'A', 0305}, {'a', 'a', 0345}, + {'A', 'E', 0306}, {'a', 'e', 0346}, + {',', 'C', 0307}, {',', 'c', 0347}, + {'`', 'E', 0310}, {'`', 'e', 0350}, + {'\'', 'E', 0311}, {'\'', 'e', 0351}, + {'^', 'E', 0312}, {'^', 'e', 0352}, + {'"', 'E', 0313}, {'"', 'e', 0353}, + {'`', 'I', 0314}, {'`', 'i', 0354}, + {'\'', 'I', 0315}, {'\'', 'i', 0355}, + {'^', 'I', 0316}, {'^', 'i', 0356}, + {'"', 'I', 0317}, {'"', 'i', 0357}, + {'-', 'D', 0320}, {'-', 'd', 0360}, + {'~', 'N', 0321}, {'~', 'n', 0361}, + {'`', 'O', 0322}, {'`', 'o', 0362}, + {'\'', 'O', 0323}, {'\'', 'o', 0363}, + {'^', 'O', 0324}, {'^', 'o', 0364}, + {'~', 'O', 0325}, {'~', 'o', 0365}, + {'"', 'O', 0326}, {'"', 'o', 0366}, + {'/', 'O', 0330}, {'/', 'o', 0370}, + {'`', 'U', 0331}, {'`', 'u', 0371}, + {'\'', 'U', 0332}, {'\'', 'u', 0372}, + {'^', 'U', 0333}, {'^', 'u', 0373}, + {'"', 'U', 0334}, {'"', 'u', 0374}, + {'\'', 'Y', 0335}, {'\'', 'y', 0375}, + {'T', 'H', 0336}, {'t', 'h', 0376}, + {'s', 's', 0337}, {'"', 'y', 0377}, + {'s', 'z', 0337}, {'i', 'j', 0377}, }; unsigned int accent_table_size = 68; diff --git a/drivers/char/esp.c b/drivers/char/esp.c index c01e26d9ee5e..f3fe62067344 100644 --- a/drivers/char/esp.c +++ b/drivers/char/esp.c @@ -2484,6 +2484,7 @@ static int __init espserial_init(void) return 0; } + spin_lock_init(&info->lock); /* rx_trigger, tx_trigger are needed by autoconfig */ info->config.rx_trigger = rx_trigger; info->config.tx_trigger = tx_trigger; diff --git a/drivers/char/isicom.c b/drivers/char/isicom.c index 85d596a3c18c..eba2883b630e 100644 --- a/drivers/char/isicom.c +++ b/drivers/char/isicom.c @@ -1527,7 +1527,7 @@ static int __devinit reset_card(struct pci_dev *pdev, msleep(10); portcount = inw(base + 0x2); - if (!inw(base + 0xe) & 0x1 || (portcount != 0 && portcount != 4 && + if (!(inw(base + 0xe) & 0x1) || (portcount != 0 && portcount != 4 && portcount != 8 && portcount != 16)) { dev_err(&pdev->dev, "ISILoad:PCI Card%d reset failure.\n", card + 1); diff --git a/drivers/char/nozomi.c b/drivers/char/nozomi.c index dfaab2322de3..6d0dc5f9b6bb 100644 --- a/drivers/char/nozomi.c +++ b/drivers/char/nozomi.c @@ -190,6 +190,14 @@ enum card_type { F32_8 = 8192, /* 3072 bytes downl. + 1024 bytes uplink * 2 -> 8192 */ }; +/* Initialization states a card can be in */ +enum card_state { + NOZOMI_STATE_UKNOWN = 0, + NOZOMI_STATE_ENABLED = 1, /* pci device enabled */ + NOZOMI_STATE_ALLOCATED = 2, /* config setup done */ + NOZOMI_STATE_READY = 3, /* flowcontrols received */ +}; + /* Two different toggle channels exist */ enum channel_type { CH_A = 0, @@ -385,6 +393,7 @@ struct nozomi { spinlock_t spin_mutex; /* secures access to registers and tty */ unsigned int index_start; + enum card_state state; u32 open_ttys; }; @@ -686,6 +695,7 @@ static int nozomi_read_config_table(struct nozomi *dc) dc->last_ier = dc->last_ier | CTRL_DL; writew(dc->last_ier, dc->reg_ier); + dc->state = NOZOMI_STATE_ALLOCATED; dev_info(&dc->pdev->dev, "Initialization OK!\n"); return 1; } @@ -944,6 +954,14 @@ static int receive_flow_control(struct nozomi *dc) case CTRL_APP2: port = PORT_APP2; enable_ier = APP2_DL; + if (dc->state == NOZOMI_STATE_ALLOCATED) { + /* + * After card initialization the flow control + * received for APP2 is always the last + */ + dc->state = NOZOMI_STATE_READY; + dev_info(&dc->pdev->dev, "Device READY!\n"); + } break; default: dev_err(&dc->pdev->dev, @@ -1366,22 +1384,12 @@ static int __devinit nozomi_card_init(struct pci_dev *pdev, dc->pdev = pdev; - /* Find out what card type it is */ - nozomi_get_card_type(dc); - ret = pci_enable_device(dc->pdev); if (ret) { dev_err(&pdev->dev, "Failed to enable PCI Device\n"); goto err_free; } - start = pci_resource_start(dc->pdev, 0); - if (start == 0) { - dev_err(&pdev->dev, "No I/O address for card detected\n"); - ret = -ENODEV; - goto err_disable_device; - } - ret = pci_request_regions(dc->pdev, NOZOMI_NAME); if (ret) { dev_err(&pdev->dev, "I/O address 0x%04x already in use\n", @@ -1389,6 +1397,16 @@ static int __devinit nozomi_card_init(struct pci_dev *pdev, goto err_disable_device; } + start = pci_resource_start(dc->pdev, 0); + if (start == 0) { + dev_err(&pdev->dev, "No I/O address for card detected\n"); + ret = -ENODEV; + goto err_rel_regs; + } + + /* Find out what card type it is */ + nozomi_get_card_type(dc); + dc->base_addr = ioremap(start, dc->card_type); if (!dc->base_addr) { dev_err(&pdev->dev, "Unable to map card MMIO\n"); @@ -1425,6 +1443,14 @@ static int __devinit nozomi_card_init(struct pci_dev *pdev, dc->index_start = ndev_idx * MAX_PORT; ndevs[ndev_idx] = dc; + pci_set_drvdata(pdev, dc); + + /* Enable RESET interrupt */ + dc->last_ier = RESET; + iowrite16(dc->last_ier, dc->reg_ier); + + dc->state = NOZOMI_STATE_ENABLED; + for (i = 0; i < MAX_PORT; i++) { mutex_init(&dc->port[i].tty_sem); dc->port[i].tty_open_count = 0; @@ -1433,12 +1459,6 @@ static int __devinit nozomi_card_init(struct pci_dev *pdev, &pdev->dev); } - /* Enable RESET interrupt. */ - dc->last_ier = RESET; - writew(dc->last_ier, dc->reg_ier); - - pci_set_drvdata(pdev, dc); - return 0; err_free_sbuf: @@ -1553,7 +1573,7 @@ static int ntty_open(struct tty_struct *tty, struct file *file) struct nozomi *dc = get_dc_by_tty(tty); unsigned long flags; - if (!port || !dc) + if (!port || !dc || dc->state != NOZOMI_STATE_READY) return -ENODEV; if (mutex_lock_interruptible(&port->tty_sem)) @@ -1716,6 +1736,10 @@ static int ntty_tiocmget(struct tty_struct *tty, struct file *file) static int ntty_tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear) { + struct nozomi *dc = get_dc_by_tty(tty); + unsigned long flags; + + spin_lock_irqsave(&dc->spin_mutex, flags); if (set & TIOCM_RTS) set_rts(tty, 1); else if (clear & TIOCM_RTS) @@ -1725,6 +1749,7 @@ static int ntty_tiocmset(struct tty_struct *tty, struct file *file, set_dtr(tty, 1); else if (clear & TIOCM_DTR) set_dtr(tty, 0); + spin_unlock_irqrestore(&dc->spin_mutex, flags); return 0; } @@ -1762,7 +1787,7 @@ static int ntty_ioctl_tiocgicount(struct port *port, void __user *argp) icount.brk = cnow.brk; icount.buf_overrun = cnow.buf_overrun; - return copy_to_user(argp, &icount, sizeof(icount)); + return copy_to_user(argp, &icount, sizeof(icount)) ? -EFAULT : 0; } static int ntty_ioctl(struct tty_struct *tty, struct file *file, diff --git a/drivers/char/pcmcia/ipwireless/network.c b/drivers/char/pcmcia/ipwireless/network.c index ff35230058d3..d793e68b3e0d 100644 --- a/drivers/char/pcmcia/ipwireless/network.c +++ b/drivers/char/pcmcia/ipwireless/network.c @@ -377,13 +377,16 @@ void ipwireless_network_packet_received(struct ipw_network *network, for (i = 0; i < MAX_ASSOCIATED_TTYS; i++) { struct ipw_tty *tty = network->associated_ttys[channel_idx][i]; + if (!tty) + continue; + /* * If it's associated with a tty (other than the RAS channel * when we're online), then send the data to that tty. The RAS * channel's data is handled above - it always goes through * ppp_generic. */ - if (tty && channel_idx == IPW_CHANNEL_RAS + if (channel_idx == IPW_CHANNEL_RAS && (network->ras_control_lines & IPW_CONTROL_LINE_DCD) != 0 && ipwireless_tty_is_modem(tty)) { diff --git a/drivers/char/riscom8.c b/drivers/char/riscom8.c index 8fc4fe4e38f1..589ac6f65b9a 100644 --- a/drivers/char/riscom8.c +++ b/drivers/char/riscom8.c @@ -1620,14 +1620,8 @@ static int __init rc_init_drivers(void) static void rc_release_drivers(void) { - unsigned long flags; - - spin_lock_irqsave(&riscom_lock, flags); - tty_unregister_driver(riscom_driver); put_tty_driver(riscom_driver); - - spin_unlock_irqrestore(&riscom_lock, flags); } #ifndef MODULE diff --git a/drivers/char/rtc.c b/drivers/char/rtc.c index 78b151c4d20f..5c3142b6f1fc 100644 --- a/drivers/char/rtc.c +++ b/drivers/char/rtc.c @@ -110,8 +110,8 @@ static int rtc_has_irq = 1; #define hpet_set_rtc_irq_bit(arg) 0 #define hpet_rtc_timer_init() do { } while (0) #define hpet_rtc_dropped_irq() 0 -#define hpet_register_irq_handler(h) 0 -#define hpet_unregister_irq_handler(h) 0 +#define hpet_register_irq_handler(h) ({ 0; }) +#define hpet_unregister_irq_handler(h) ({ 0; }) #ifdef RTC_IRQ static irqreturn_t hpet_rtc_interrupt(int irq, void *dev_id) { diff --git a/drivers/char/specialix.c b/drivers/char/specialix.c index c0e08c7bca2f..5ff83df67b44 100644 --- a/drivers/char/specialix.c +++ b/drivers/char/specialix.c @@ -2109,7 +2109,6 @@ static void sx_throttle(struct tty_struct * tty) sx_out(bp, CD186x_CAR, port_No(port)); spin_unlock_irqrestore(&bp->lock, flags); if (I_IXOFF(tty)) { - spin_unlock_irqrestore(&bp->lock, flags); sx_wait_CCR(bp); spin_lock_irqsave(&bp->lock, flags); sx_out(bp, CD186x_CCR, CCR_SSCH2); diff --git a/drivers/char/vt.c b/drivers/char/vt.c index 367be9175061..9b58b894f823 100644 --- a/drivers/char/vt.c +++ b/drivers/char/vt.c @@ -702,6 +702,7 @@ void redraw_screen(struct vc_data *vc, int is_switch) if (is_switch) { set_leds(); compute_shiftstate(); + notify_update(vc); } } diff --git a/drivers/char/xilinx_hwicap/buffer_icap.c b/drivers/char/xilinx_hwicap/buffer_icap.c index dfea2bde162b..f577daedb630 100644 --- a/drivers/char/xilinx_hwicap/buffer_icap.c +++ b/drivers/char/xilinx_hwicap/buffer_icap.c @@ -73,8 +73,8 @@ #define XHI_BUFFER_START 0 /** - * buffer_icap_get_status: Get the contents of the status register. - * @parameter base_address: is the base address of the device + * buffer_icap_get_status - Get the contents of the status register. + * @base_address: is the base address of the device * * The status register contains the ICAP status and the done bit. * @@ -94,9 +94,9 @@ static inline u32 buffer_icap_get_status(void __iomem *base_address) } /** - * buffer_icap_get_bram: Reads data from the storage buffer bram. - * @parameter base_address: contains the base address of the component. - * @parameter offset: The word offset from which the data should be read. + * buffer_icap_get_bram - Reads data from the storage buffer bram. + * @base_address: contains the base address of the component. + * @offset: The word offset from which the data should be read. * * A bram is used as a configuration memory cache. One frame of data can * be stored in this "storage buffer". @@ -108,8 +108,8 @@ static inline u32 buffer_icap_get_bram(void __iomem *base_address, } /** - * buffer_icap_busy: Return true if the icap device is busy - * @parameter base_address: is the base address of the device + * buffer_icap_busy - Return true if the icap device is busy + * @base_address: is the base address of the device * * The queries the low order bit of the status register, which * indicates whether the current configuration or readback operation @@ -121,8 +121,8 @@ static inline bool buffer_icap_busy(void __iomem *base_address) } /** - * buffer_icap_busy: Return true if the icap device is not busy - * @parameter base_address: is the base address of the device + * buffer_icap_busy - Return true if the icap device is not busy + * @base_address: is the base address of the device * * The queries the low order bit of the status register, which * indicates whether the current configuration or readback operation @@ -134,9 +134,9 @@ static inline bool buffer_icap_done(void __iomem *base_address) } /** - * buffer_icap_set_size: Set the size register. - * @parameter base_address: is the base address of the device - * @parameter data: The size in bytes. + * buffer_icap_set_size - Set the size register. + * @base_address: is the base address of the device + * @data: The size in bytes. * * The size register holds the number of 8 bit bytes to transfer between * bram and the icap (or icap to bram). @@ -148,9 +148,9 @@ static inline void buffer_icap_set_size(void __iomem *base_address, } /** - * buffer_icap_mSetoffsetReg: Set the bram offset register. - * @parameter base_address: contains the base address of the device. - * @parameter data: is the value to be written to the data register. + * buffer_icap_set_offset - Set the bram offset register. + * @base_address: contains the base address of the device. + * @data: is the value to be written to the data register. * * The bram offset register holds the starting bram address to transfer * data from during configuration or write data to during readback. @@ -162,9 +162,9 @@ static inline void buffer_icap_set_offset(void __iomem *base_address, } /** - * buffer_icap_set_rnc: Set the RNC (Readback not Configure) register. - * @parameter base_address: contains the base address of the device. - * @parameter data: is the value to be written to the data register. + * buffer_icap_set_rnc - Set the RNC (Readback not Configure) register. + * @base_address: contains the base address of the device. + * @data: is the value to be written to the data register. * * The RNC register determines the direction of the data transfer. It * controls whether a configuration or readback take place. Writing to @@ -178,10 +178,10 @@ static inline void buffer_icap_set_rnc(void __iomem *base_address, } /** - * buffer_icap_set_bram: Write data to the storage buffer bram. - * @parameter base_address: contains the base address of the component. - * @parameter offset: The word offset at which the data should be written. - * @parameter data: The value to be written to the bram offset. + * buffer_icap_set_bram - Write data to the storage buffer bram. + * @base_address: contains the base address of the component. + * @offset: The word offset at which the data should be written. + * @data: The value to be written to the bram offset. * * A bram is used as a configuration memory cache. One frame of data can * be stored in this "storage buffer". @@ -193,10 +193,10 @@ static inline void buffer_icap_set_bram(void __iomem *base_address, } /** - * buffer_icap_device_read: Transfer bytes from ICAP to the storage buffer. - * @parameter drvdata: a pointer to the drvdata. - * @parameter offset: The storage buffer start address. - * @parameter count: The number of words (32 bit) to read from the + * buffer_icap_device_read - Transfer bytes from ICAP to the storage buffer. + * @drvdata: a pointer to the drvdata. + * @offset: The storage buffer start address. + * @count: The number of words (32 bit) to read from the * device (ICAP). **/ static int buffer_icap_device_read(struct hwicap_drvdata *drvdata, @@ -227,10 +227,10 @@ static int buffer_icap_device_read(struct hwicap_drvdata *drvdata, }; /** - * buffer_icap_device_write: Transfer bytes from ICAP to the storage buffer. - * @parameter drvdata: a pointer to the drvdata. - * @parameter offset: The storage buffer start address. - * @parameter count: The number of words (32 bit) to read from the + * buffer_icap_device_write - Transfer bytes from ICAP to the storage buffer. + * @drvdata: a pointer to the drvdata. + * @offset: The storage buffer start address. + * @count: The number of words (32 bit) to read from the * device (ICAP). **/ static int buffer_icap_device_write(struct hwicap_drvdata *drvdata, @@ -261,8 +261,8 @@ static int buffer_icap_device_write(struct hwicap_drvdata *drvdata, }; /** - * buffer_icap_reset: Reset the logic of the icap device. - * @parameter drvdata: a pointer to the drvdata. + * buffer_icap_reset - Reset the logic of the icap device. + * @drvdata: a pointer to the drvdata. * * Writing to the status register resets the ICAP logic in an internal * version of the core. For the version of the core published in EDK, @@ -274,10 +274,10 @@ void buffer_icap_reset(struct hwicap_drvdata *drvdata) } /** - * buffer_icap_set_configuration: Load a partial bitstream from system memory. - * @parameter drvdata: a pointer to the drvdata. - * @parameter data: Kernel address of the partial bitstream. - * @parameter size: the size of the partial bitstream in 32 bit words. + * buffer_icap_set_configuration - Load a partial bitstream from system memory. + * @drvdata: a pointer to the drvdata. + * @data: Kernel address of the partial bitstream. + * @size: the size of the partial bitstream in 32 bit words. **/ int buffer_icap_set_configuration(struct hwicap_drvdata *drvdata, u32 *data, u32 size) @@ -333,10 +333,10 @@ int buffer_icap_set_configuration(struct hwicap_drvdata *drvdata, u32 *data, }; /** - * buffer_icap_get_configuration: Read configuration data from the device. - * @parameter drvdata: a pointer to the drvdata. - * @parameter data: Address of the data representing the partial bitstream - * @parameter size: the size of the partial bitstream in 32 bit words. + * buffer_icap_get_configuration - Read configuration data from the device. + * @drvdata: a pointer to the drvdata. + * @data: Address of the data representing the partial bitstream + * @size: the size of the partial bitstream in 32 bit words. **/ int buffer_icap_get_configuration(struct hwicap_drvdata *drvdata, u32 *data, u32 size) diff --git a/drivers/char/xilinx_hwicap/fifo_icap.c b/drivers/char/xilinx_hwicap/fifo_icap.c index 0988314694a6..6f45dbd47125 100644 --- a/drivers/char/xilinx_hwicap/fifo_icap.c +++ b/drivers/char/xilinx_hwicap/fifo_icap.c @@ -94,9 +94,9 @@ /** - * fifo_icap_fifo_write: Write data to the write FIFO. - * @parameter drvdata: a pointer to the drvdata. - * @parameter data: the 32-bit value to be written to the FIFO. + * fifo_icap_fifo_write - Write data to the write FIFO. + * @drvdata: a pointer to the drvdata. + * @data: the 32-bit value to be written to the FIFO. * * This function will silently fail if the fifo is full. **/ @@ -108,8 +108,8 @@ static inline void fifo_icap_fifo_write(struct hwicap_drvdata *drvdata, } /** - * fifo_icap_fifo_read: Read data from the Read FIFO. - * @parameter drvdata: a pointer to the drvdata. + * fifo_icap_fifo_read - Read data from the Read FIFO. + * @drvdata: a pointer to the drvdata. * * This function will silently fail if the fifo is empty. **/ @@ -121,9 +121,9 @@ static inline u32 fifo_icap_fifo_read(struct hwicap_drvdata *drvdata) } /** - * fifo_icap_set_read_size: Set the the size register. - * @parameter drvdata: a pointer to the drvdata. - * @parameter data: the size of the following read transaction, in words. + * fifo_icap_set_read_size - Set the the size register. + * @drvdata: a pointer to the drvdata. + * @data: the size of the following read transaction, in words. **/ static inline void fifo_icap_set_read_size(struct hwicap_drvdata *drvdata, u32 data) @@ -132,8 +132,8 @@ static inline void fifo_icap_set_read_size(struct hwicap_drvdata *drvdata, } /** - * fifo_icap_start_config: Initiate a configuration (write) to the device. - * @parameter drvdata: a pointer to the drvdata. + * fifo_icap_start_config - Initiate a configuration (write) to the device. + * @drvdata: a pointer to the drvdata. **/ static inline void fifo_icap_start_config(struct hwicap_drvdata *drvdata) { @@ -142,8 +142,8 @@ static inline void fifo_icap_start_config(struct hwicap_drvdata *drvdata) } /** - * fifo_icap_start_readback: Initiate a readback from the device. - * @parameter drvdata: a pointer to the drvdata. + * fifo_icap_start_readback - Initiate a readback from the device. + * @drvdata: a pointer to the drvdata. **/ static inline void fifo_icap_start_readback(struct hwicap_drvdata *drvdata) { @@ -152,8 +152,8 @@ static inline void fifo_icap_start_readback(struct hwicap_drvdata *drvdata) } /** - * fifo_icap_busy: Return true if the ICAP is still processing a transaction. - * @parameter drvdata: a pointer to the drvdata. + * fifo_icap_busy - Return true if the ICAP is still processing a transaction. + * @drvdata: a pointer to the drvdata. **/ static inline u32 fifo_icap_busy(struct hwicap_drvdata *drvdata) { @@ -163,8 +163,8 @@ static inline u32 fifo_icap_busy(struct hwicap_drvdata *drvdata) } /** - * fifo_icap_write_fifo_vacancy: Query the write fifo available space. - * @parameter drvdata: a pointer to the drvdata. + * fifo_icap_write_fifo_vacancy - Query the write fifo available space. + * @drvdata: a pointer to the drvdata. * * Return the number of words that can be safely pushed into the write fifo. **/ @@ -175,8 +175,8 @@ static inline u32 fifo_icap_write_fifo_vacancy( } /** - * fifo_icap_read_fifo_occupancy: Query the read fifo available data. - * @parameter drvdata: a pointer to the drvdata. + * fifo_icap_read_fifo_occupancy - Query the read fifo available data. + * @drvdata: a pointer to the drvdata. * * Return the number of words that can be safely read from the read fifo. **/ @@ -187,11 +187,11 @@ static inline u32 fifo_icap_read_fifo_occupancy( } /** - * fifo_icap_set_configuration: Send configuration data to the ICAP. - * @parameter drvdata: a pointer to the drvdata. - * @parameter frame_buffer: a pointer to the data to be written to the + * fifo_icap_set_configuration - Send configuration data to the ICAP. + * @drvdata: a pointer to the drvdata. + * @frame_buffer: a pointer to the data to be written to the * ICAP device. - * @parameter num_words: the number of words (32 bit) to write to the ICAP + * @num_words: the number of words (32 bit) to write to the ICAP * device. * This function writes the given user data to the Write FIFO in @@ -266,10 +266,10 @@ int fifo_icap_set_configuration(struct hwicap_drvdata *drvdata, } /** - * fifo_icap_get_configuration: Read configuration data from the device. - * @parameter drvdata: a pointer to the drvdata. - * @parameter data: Address of the data representing the partial bitstream - * @parameter size: the size of the partial bitstream in 32 bit words. + * fifo_icap_get_configuration - Read configuration data from the device. + * @drvdata: a pointer to the drvdata. + * @data: Address of the data representing the partial bitstream + * @size: the size of the partial bitstream in 32 bit words. * * This function reads the specified number of words from the ICAP device in * the polled mode. @@ -335,8 +335,8 @@ int fifo_icap_get_configuration(struct hwicap_drvdata *drvdata, } /** - * buffer_icap_reset: Reset the logic of the icap device. - * @parameter drvdata: a pointer to the drvdata. + * buffer_icap_reset - Reset the logic of the icap device. + * @drvdata: a pointer to the drvdata. * * This function forces the software reset of the complete HWICAP device. * All the registers will return to the default value and the FIFO is also @@ -360,8 +360,8 @@ void fifo_icap_reset(struct hwicap_drvdata *drvdata) } /** - * fifo_icap_flush_fifo: This function flushes the FIFOs in the device. - * @parameter drvdata: a pointer to the drvdata. + * fifo_icap_flush_fifo - This function flushes the FIFOs in the device. + * @drvdata: a pointer to the drvdata. */ void fifo_icap_flush_fifo(struct hwicap_drvdata *drvdata) { diff --git a/drivers/char/xilinx_hwicap/xilinx_hwicap.c b/drivers/char/xilinx_hwicap/xilinx_hwicap.c index 24f6aef0fd3c..2284fa2a5a57 100644 --- a/drivers/char/xilinx_hwicap/xilinx_hwicap.c +++ b/drivers/char/xilinx_hwicap/xilinx_hwicap.c @@ -84,7 +84,7 @@ #include <linux/init.h> #include <linux/poll.h> #include <linux/proc_fs.h> -#include <asm/semaphore.h> +#include <linux/mutex.h> #include <linux/sysctl.h> #include <linux/version.h> #include <linux/fs.h> @@ -119,6 +119,7 @@ module_param(xhwicap_minor, int, S_IRUGO); /* An array, which is set to true when the device is registered. */ static bool probed_devices[HWICAP_DEVICES]; +static struct mutex icap_sem; static struct class *icap_class; @@ -199,14 +200,14 @@ static const struct config_registers v5_config_registers = { }; /** - * hwicap_command_desync: Send a DESYNC command to the ICAP port. - * @parameter drvdata: a pointer to the drvdata. + * hwicap_command_desync - Send a DESYNC command to the ICAP port. + * @drvdata: a pointer to the drvdata. * * This command desynchronizes the ICAP After this command, a * bitstream containing a NULL packet, followed by a SYNCH packet is * required before the ICAP will recognize commands. */ -int hwicap_command_desync(struct hwicap_drvdata *drvdata) +static int hwicap_command_desync(struct hwicap_drvdata *drvdata) { u32 buffer[4]; u32 index = 0; @@ -228,51 +229,18 @@ int hwicap_command_desync(struct hwicap_drvdata *drvdata) } /** - * hwicap_command_capture: Send a CAPTURE command to the ICAP port. - * @parameter drvdata: a pointer to the drvdata. - * - * This command captures all of the flip flop states so they will be - * available during readback. One can use this command instead of - * enabling the CAPTURE block in the design. - */ -int hwicap_command_capture(struct hwicap_drvdata *drvdata) -{ - u32 buffer[7]; - u32 index = 0; - - /* - * Create the data to be written to the ICAP. - */ - buffer[index++] = XHI_DUMMY_PACKET; - buffer[index++] = XHI_SYNC_PACKET; - buffer[index++] = XHI_NOOP_PACKET; - buffer[index++] = hwicap_type_1_write(drvdata->config_regs->CMD) | 1; - buffer[index++] = XHI_CMD_GCAPTURE; - buffer[index++] = XHI_DUMMY_PACKET; - buffer[index++] = XHI_DUMMY_PACKET; - - /* - * Write the data to the FIFO and intiate the transfer of data - * present in the FIFO to the ICAP device. - */ - return drvdata->config->set_configuration(drvdata, - &buffer[0], index); - -} - -/** - * hwicap_get_configuration_register: Query a configuration register. - * @parameter drvdata: a pointer to the drvdata. - * @parameter reg: a constant which represents the configuration + * hwicap_get_configuration_register - Query a configuration register. + * @drvdata: a pointer to the drvdata. + * @reg: a constant which represents the configuration * register value to be returned. * Examples: XHI_IDCODE, XHI_FLR. - * @parameter RegData: returns the value of the register. + * @reg_data: returns the value of the register. * * Sends a query packet to the ICAP and then receives the response. * The icap is left in Synched state. */ -int hwicap_get_configuration_register(struct hwicap_drvdata *drvdata, - u32 reg, u32 *RegData) +static int hwicap_get_configuration_register(struct hwicap_drvdata *drvdata, + u32 reg, u32 *reg_data) { int status; u32 buffer[6]; @@ -300,14 +268,14 @@ int hwicap_get_configuration_register(struct hwicap_drvdata *drvdata, /* * Read the configuration register */ - status = drvdata->config->get_configuration(drvdata, RegData, 1); + status = drvdata->config->get_configuration(drvdata, reg_data, 1); if (status) return status; return 0; } -int hwicap_initialize_hwicap(struct hwicap_drvdata *drvdata) +static int hwicap_initialize_hwicap(struct hwicap_drvdata *drvdata) { int status; u32 idcode; @@ -344,7 +312,7 @@ int hwicap_initialize_hwicap(struct hwicap_drvdata *drvdata) } static ssize_t -hwicap_read(struct file *file, char *buf, size_t count, loff_t *ppos) +hwicap_read(struct file *file, char __user *buf, size_t count, loff_t *ppos) { struct hwicap_drvdata *drvdata = file->private_data; ssize_t bytes_to_read = 0; @@ -353,8 +321,9 @@ hwicap_read(struct file *file, char *buf, size_t count, loff_t *ppos) u32 bytes_remaining; int status; - if (down_interruptible(&drvdata->sem)) - return -ERESTARTSYS; + status = mutex_lock_interruptible(&drvdata->sem); + if (status) + return status; if (drvdata->read_buffer_in_use) { /* If there are leftover bytes in the buffer, just */ @@ -370,8 +339,9 @@ hwicap_read(struct file *file, char *buf, size_t count, loff_t *ppos) goto error; } drvdata->read_buffer_in_use -= bytes_to_read; - memcpy(drvdata->read_buffer + bytes_to_read, - drvdata->read_buffer, 4 - bytes_to_read); + memmove(drvdata->read_buffer, + drvdata->read_buffer + bytes_to_read, + 4 - bytes_to_read); } else { /* Get new data from the ICAP, and return was was requested. */ kbuf = (u32 *) get_zeroed_page(GFP_KERNEL); @@ -414,18 +384,20 @@ hwicap_read(struct file *file, char *buf, size_t count, loff_t *ppos) status = -EFAULT; goto error; } - memcpy(kbuf, drvdata->read_buffer, bytes_remaining); + memcpy(drvdata->read_buffer, + kbuf, + bytes_remaining); drvdata->read_buffer_in_use = bytes_remaining; free_page((unsigned long)kbuf); } status = bytes_to_read; error: - up(&drvdata->sem); + mutex_unlock(&drvdata->sem); return status; } static ssize_t -hwicap_write(struct file *file, const char *buf, +hwicap_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos) { struct hwicap_drvdata *drvdata = file->private_data; @@ -435,8 +407,9 @@ hwicap_write(struct file *file, const char *buf, ssize_t len; ssize_t status; - if (down_interruptible(&drvdata->sem)) - return -ERESTARTSYS; + status = mutex_lock_interruptible(&drvdata->sem); + if (status) + return status; left += drvdata->write_buffer_in_use; @@ -465,7 +438,7 @@ hwicap_write(struct file *file, const char *buf, memcpy(kbuf, drvdata->write_buffer, drvdata->write_buffer_in_use); if (copy_from_user( - (((char *)kbuf) + (drvdata->write_buffer_in_use)), + (((char *)kbuf) + drvdata->write_buffer_in_use), buf + written, len - (drvdata->write_buffer_in_use))) { free_page((unsigned long)kbuf); @@ -508,7 +481,7 @@ hwicap_write(struct file *file, const char *buf, free_page((unsigned long)kbuf); status = written; error: - up(&drvdata->sem); + mutex_unlock(&drvdata->sem); return status; } @@ -519,8 +492,9 @@ static int hwicap_open(struct inode *inode, struct file *file) drvdata = container_of(inode->i_cdev, struct hwicap_drvdata, cdev); - if (down_interruptible(&drvdata->sem)) - return -ERESTARTSYS; + status = mutex_lock_interruptible(&drvdata->sem); + if (status) + return status; if (drvdata->is_open) { status = -EBUSY; @@ -539,7 +513,7 @@ static int hwicap_open(struct inode *inode, struct file *file) drvdata->is_open = 1; error: - up(&drvdata->sem); + mutex_unlock(&drvdata->sem); return status; } @@ -549,8 +523,7 @@ static int hwicap_release(struct inode *inode, struct file *file) int i; int status = 0; - if (down_interruptible(&drvdata->sem)) - return -ERESTARTSYS; + mutex_lock(&drvdata->sem); if (drvdata->write_buffer_in_use) { /* Flush write buffer. */ @@ -569,7 +542,7 @@ static int hwicap_release(struct inode *inode, struct file *file) error: drvdata->is_open = 0; - up(&drvdata->sem); + mutex_unlock(&drvdata->sem); return status; } @@ -592,31 +565,36 @@ static int __devinit hwicap_setup(struct device *dev, int id, dev_info(dev, "Xilinx icap port driver\n"); + mutex_lock(&icap_sem); + if (id < 0) { for (id = 0; id < HWICAP_DEVICES; id++) if (!probed_devices[id]) break; } if (id < 0 || id >= HWICAP_DEVICES) { + mutex_unlock(&icap_sem); dev_err(dev, "%s%i too large\n", DRIVER_NAME, id); return -EINVAL; } if (probed_devices[id]) { + mutex_unlock(&icap_sem); dev_err(dev, "cannot assign to %s%i; it is already in use\n", DRIVER_NAME, id); return -EBUSY; } probed_devices[id] = 1; + mutex_unlock(&icap_sem); devt = MKDEV(xhwicap_major, xhwicap_minor + id); - drvdata = kmalloc(sizeof(struct hwicap_drvdata), GFP_KERNEL); + drvdata = kzalloc(sizeof(struct hwicap_drvdata), GFP_KERNEL); if (!drvdata) { dev_err(dev, "Couldn't allocate device private record\n"); - return -ENOMEM; + retval = -ENOMEM; + goto failed0; } - memset((void *)drvdata, 0, sizeof(struct hwicap_drvdata)); dev_set_drvdata(dev, (void *)drvdata); if (!regs_res) { @@ -648,7 +626,7 @@ static int __devinit hwicap_setup(struct device *dev, int id, drvdata->config = config; drvdata->config_regs = config_regs; - init_MUTEX(&drvdata->sem); + mutex_init(&drvdata->sem); drvdata->is_open = 0; dev_info(dev, "ioremap %lx to %p with size %x\n", @@ -663,7 +641,7 @@ static int __devinit hwicap_setup(struct device *dev, int id, goto failed3; } /* devfs_mk_cdev(devt, S_IFCHR|S_IRUGO|S_IWUGO, DRIVER_NAME); */ - class_device_create(icap_class, NULL, devt, NULL, DRIVER_NAME); + device_create(icap_class, dev, devt, "%s%d", DRIVER_NAME, id); return 0; /* success */ failed3: @@ -675,6 +653,11 @@ static int __devinit hwicap_setup(struct device *dev, int id, failed1: kfree(drvdata); + failed0: + mutex_lock(&icap_sem); + probed_devices[id] = 0; + mutex_unlock(&icap_sem); + return retval; } @@ -699,14 +682,16 @@ static int __devexit hwicap_remove(struct device *dev) if (!drvdata) return 0; - class_device_destroy(icap_class, drvdata->devt); + device_destroy(icap_class, drvdata->devt); cdev_del(&drvdata->cdev); iounmap(drvdata->base_address); release_mem_region(drvdata->mem_start, drvdata->mem_size); kfree(drvdata); dev_set_drvdata(dev, NULL); - probed_devices[MINOR(dev->devt)-xhwicap_minor] = 0; + mutex_lock(&icap_sem); + probed_devices[MINOR(dev->devt)-xhwicap_minor] = 0; + mutex_unlock(&icap_sem); return 0; /* success */ } @@ -821,28 +806,29 @@ static struct of_platform_driver hwicap_of_driver = { }; /* Registration helpers to keep the number of #ifdefs to a minimum */ -static inline int __devinit hwicap_of_register(void) +static inline int __init hwicap_of_register(void) { pr_debug("hwicap: calling of_register_platform_driver()\n"); return of_register_platform_driver(&hwicap_of_driver); } -static inline void __devexit hwicap_of_unregister(void) +static inline void __exit hwicap_of_unregister(void) { of_unregister_platform_driver(&hwicap_of_driver); } #else /* CONFIG_OF */ /* CONFIG_OF not enabled; do nothing helpers */ -static inline int __devinit hwicap_of_register(void) { return 0; } -static inline void __devexit hwicap_of_unregister(void) { } +static inline int __init hwicap_of_register(void) { return 0; } +static inline void __exit hwicap_of_unregister(void) { } #endif /* CONFIG_OF */ -static int __devinit hwicap_module_init(void) +static int __init hwicap_module_init(void) { dev_t devt; int retval; icap_class = class_create(THIS_MODULE, "xilinx_config"); + mutex_init(&icap_sem); if (xhwicap_major) { devt = MKDEV(xhwicap_major, xhwicap_minor); @@ -883,7 +869,7 @@ static int __devinit hwicap_module_init(void) return retval; } -static void __devexit hwicap_module_cleanup(void) +static void __exit hwicap_module_cleanup(void) { dev_t devt = MKDEV(xhwicap_major, xhwicap_minor); diff --git a/drivers/char/xilinx_hwicap/xilinx_hwicap.h b/drivers/char/xilinx_hwicap/xilinx_hwicap.h index ae771cac1629..405fee7e189b 100644 --- a/drivers/char/xilinx_hwicap/xilinx_hwicap.h +++ b/drivers/char/xilinx_hwicap/xilinx_hwicap.h @@ -48,9 +48,9 @@ struct hwicap_drvdata { u8 write_buffer[4]; u32 read_buffer_in_use; /* Always in [0,3] */ u8 read_buffer[4]; - u32 mem_start; /* phys. address of the control registers */ - u32 mem_end; /* phys. address of the control registers */ - u32 mem_size; + resource_size_t mem_start;/* phys. address of the control registers */ + resource_size_t mem_end; /* phys. address of the control registers */ + resource_size_t mem_size; void __iomem *base_address;/* virt. address of the control registers */ struct device *dev; @@ -61,7 +61,7 @@ struct hwicap_drvdata { const struct config_registers *config_regs; void *private_data; bool is_open; - struct semaphore sem; + struct mutex sem; }; struct hwicap_driver_config { @@ -164,29 +164,29 @@ struct config_registers { #define XHI_DISABLED_AUTO_CRC 0x0000DEFCUL /** - * hwicap_type_1_read: Generates a Type 1 read packet header. - * @parameter: Register is the address of the register to be read back. + * hwicap_type_1_read - Generates a Type 1 read packet header. + * @reg: is the address of the register to be read back. * * Generates a Type 1 read packet header, which is used to indirectly * read registers in the configuration logic. This packet must then * be sent through the icap device, and a return packet received with * the information. **/ -static inline u32 hwicap_type_1_read(u32 Register) +static inline u32 hwicap_type_1_read(u32 reg) { return (XHI_TYPE_1 << XHI_TYPE_SHIFT) | - (Register << XHI_REGISTER_SHIFT) | + (reg << XHI_REGISTER_SHIFT) | (XHI_OP_READ << XHI_OP_SHIFT); } /** - * hwicap_type_1_write: Generates a Type 1 write packet header - * @parameter: Register is the address of the register to be read back. + * hwicap_type_1_write - Generates a Type 1 write packet header + * @reg: is the address of the register to be read back. **/ -static inline u32 hwicap_type_1_write(u32 Register) +static inline u32 hwicap_type_1_write(u32 reg) { return (XHI_TYPE_1 << XHI_TYPE_SHIFT) | - (Register << XHI_REGISTER_SHIFT) | + (reg << XHI_REGISTER_SHIFT) | (XHI_OP_WRITE << XHI_OP_SHIFT); } diff --git a/drivers/connector/connector.c b/drivers/connector/connector.c index fea2d3ed9cbd..85e2ba7fcfba 100644 --- a/drivers/connector/connector.c +++ b/drivers/connector/connector.c @@ -47,7 +47,7 @@ static LIST_HEAD(notify_list); static struct cn_dev cdev; -int cn_already_initialized = 0; +static int cn_already_initialized; /* * msg->seq and msg->ack are used to determine message genealogy. diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index 89a29cd93783..35a26a3e5f68 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -671,13 +671,13 @@ static ssize_t show(struct kobject * kobj, struct attribute * attr ,char * buf) { struct cpufreq_policy * policy = to_policy(kobj); struct freq_attr * fattr = to_attr(attr); - ssize_t ret; + ssize_t ret = -EINVAL; policy = cpufreq_cpu_get(policy->cpu); if (!policy) - return -EINVAL; + goto no_policy; if (lock_policy_rwsem_read(policy->cpu) < 0) - return -EINVAL; + goto fail; if (fattr->show) ret = fattr->show(policy, buf); @@ -685,8 +685,9 @@ static ssize_t show(struct kobject * kobj, struct attribute * attr ,char * buf) ret = -EIO; unlock_policy_rwsem_read(policy->cpu); - +fail: cpufreq_cpu_put(policy); +no_policy: return ret; } @@ -695,13 +696,13 @@ static ssize_t store(struct kobject * kobj, struct attribute * attr, { struct cpufreq_policy * policy = to_policy(kobj); struct freq_attr * fattr = to_attr(attr); - ssize_t ret; + ssize_t ret = -EINVAL; policy = cpufreq_cpu_get(policy->cpu); if (!policy) - return -EINVAL; + goto no_policy; if (lock_policy_rwsem_write(policy->cpu) < 0) - return -EINVAL; + goto fail; if (fattr->store) ret = fattr->store(policy, buf, count); @@ -709,8 +710,9 @@ static ssize_t store(struct kobject * kobj, struct attribute * attr, ret = -EIO; unlock_policy_rwsem_write(policy->cpu); - +fail: cpufreq_cpu_put(policy); +no_policy: return ret; } @@ -1775,7 +1777,7 @@ static int __cpuinit cpufreq_cpu_callback(struct notifier_block *nfb, return NOTIFY_OK; } -static struct notifier_block __cpuinitdata cpufreq_cpu_notifier = +static struct notifier_block __refdata cpufreq_cpu_notifier = { .notifier_call = cpufreq_cpu_callback, }; diff --git a/drivers/cpufreq/cpufreq_stats.c b/drivers/cpufreq/cpufreq_stats.c index 1b8312b02006..070421a5480e 100644 --- a/drivers/cpufreq/cpufreq_stats.c +++ b/drivers/cpufreq/cpufreq_stats.c @@ -323,7 +323,7 @@ static int __cpuinit cpufreq_stat_cpu_callback(struct notifier_block *nfb, return NOTIFY_OK; } -static struct notifier_block cpufreq_stat_cpu_notifier __cpuinitdata = +static struct notifier_block cpufreq_stat_cpu_notifier __refdata = { .notifier_call = cpufreq_stat_cpu_callback, }; diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig index a703deffb795..27340a7b19dd 100644 --- a/drivers/dma/Kconfig +++ b/drivers/dma/Kconfig @@ -4,7 +4,7 @@ menuconfig DMADEVICES bool "DMA Engine support" - depends on (PCI && X86) || ARCH_IOP32X || ARCH_IOP33X || ARCH_IOP13XX + depends on (PCI && X86) || ARCH_IOP32X || ARCH_IOP33X || ARCH_IOP13XX || PPC depends on !HIGHMEM64G help DMA engines can do asynchronous data transfers without @@ -37,6 +37,23 @@ config INTEL_IOP_ADMA help Enable support for the Intel(R) IOP Series RAID engines. +config FSL_DMA + bool "Freescale MPC85xx/MPC83xx DMA support" + depends on PPC + select DMA_ENGINE + ---help--- + Enable support for the Freescale DMA engine. Now, it support + MPC8560/40, MPC8555, MPC8548 and MPC8641 processors. + The MPC8349, MPC8360 is also supported. + +config FSL_DMA_SELFTEST + bool "Enable the self test for each DMA channel" + depends on FSL_DMA + default y + ---help--- + Enable the self test for each DMA channel. A self test will be + performed after the channel probed to ensure the DMA works well. + config DMA_ENGINE bool diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile index b152cd84e123..c8036d945902 100644 --- a/drivers/dma/Makefile +++ b/drivers/dma/Makefile @@ -3,3 +3,4 @@ obj-$(CONFIG_NET_DMA) += iovlock.o obj-$(CONFIG_INTEL_IOATDMA) += ioatdma.o ioatdma-objs := ioat.o ioat_dma.o ioat_dca.o obj-$(CONFIG_INTEL_IOP_ADMA) += iop-adma.o +obj-$(CONFIG_FSL_DMA) += fsldma.o diff --git a/drivers/dma/fsldma.c b/drivers/dma/fsldma.c new file mode 100644 index 000000000000..cc9a68158d99 --- /dev/null +++ b/drivers/dma/fsldma.c @@ -0,0 +1,1067 @@ +/* + * Freescale MPC85xx, MPC83xx DMA Engine support + * + * Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved. + * + * Author: + * Zhang Wei <wei.zhang@freescale.com>, Jul 2007 + * Ebony Zhu <ebony.zhu@freescale.com>, May 2007 + * + * Description: + * DMA engine driver for Freescale MPC8540 DMA controller, which is + * also fit for MPC8560, MPC8555, MPC8548, MPC8641, and etc. + * The support for MPC8349 DMA contorller is also added. + * + * This is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/interrupt.h> +#include <linux/dmaengine.h> +#include <linux/delay.h> +#include <linux/dma-mapping.h> +#include <linux/dmapool.h> +#include <linux/of_platform.h> + +#include "fsldma.h" + +static void dma_init(struct fsl_dma_chan *fsl_chan) +{ + /* Reset the channel */ + DMA_OUT(fsl_chan, &fsl_chan->reg_base->mr, 0, 32); + + switch (fsl_chan->feature & FSL_DMA_IP_MASK) { + case FSL_DMA_IP_85XX: + /* Set the channel to below modes: + * EIE - Error interrupt enable + * EOSIE - End of segments interrupt enable (basic mode) + * EOLNIE - End of links interrupt enable + */ + DMA_OUT(fsl_chan, &fsl_chan->reg_base->mr, FSL_DMA_MR_EIE + | FSL_DMA_MR_EOLNIE | FSL_DMA_MR_EOSIE, 32); + break; + case FSL_DMA_IP_83XX: + /* Set the channel to below modes: + * EOTIE - End-of-transfer interrupt enable + */ + DMA_OUT(fsl_chan, &fsl_chan->reg_base->mr, FSL_DMA_MR_EOTIE, + 32); + break; + } + +} + +static void set_sr(struct fsl_dma_chan *fsl_chan, dma_addr_t val) +{ + DMA_OUT(fsl_chan, &fsl_chan->reg_base->sr, val, 32); +} + +static dma_addr_t get_sr(struct fsl_dma_chan *fsl_chan) +{ + return DMA_IN(fsl_chan, &fsl_chan->reg_base->sr, 32); +} + +static void set_desc_cnt(struct fsl_dma_chan *fsl_chan, + struct fsl_dma_ld_hw *hw, u32 count) +{ + hw->count = CPU_TO_DMA(fsl_chan, count, 32); +} + +static void set_desc_src(struct fsl_dma_chan *fsl_chan, + struct fsl_dma_ld_hw *hw, dma_addr_t src) +{ + u64 snoop_bits; + + snoop_bits = ((fsl_chan->feature & FSL_DMA_IP_MASK) == FSL_DMA_IP_85XX) + ? ((u64)FSL_DMA_SATR_SREADTYPE_SNOOP_READ << 32) : 0; + hw->src_addr = CPU_TO_DMA(fsl_chan, snoop_bits | src, 64); +} + +static void set_desc_dest(struct fsl_dma_chan *fsl_chan, + struct fsl_dma_ld_hw *hw, dma_addr_t dest) +{ + u64 snoop_bits; + + snoop_bits = ((fsl_chan->feature & FSL_DMA_IP_MASK) == FSL_DMA_IP_85XX) + ? ((u64)FSL_DMA_DATR_DWRITETYPE_SNOOP_WRITE << 32) : 0; + hw->dst_addr = CPU_TO_DMA(fsl_chan, snoop_bits | dest, 64); +} + +static void set_desc_next(struct fsl_dma_chan *fsl_chan, + struct fsl_dma_ld_hw *hw, dma_addr_t next) +{ + u64 snoop_bits; + + snoop_bits = ((fsl_chan->feature & FSL_DMA_IP_MASK) == FSL_DMA_IP_83XX) + ? FSL_DMA_SNEN : 0; + hw->next_ln_addr = CPU_TO_DMA(fsl_chan, snoop_bits | next, 64); +} + +static void set_cdar(struct fsl_dma_chan *fsl_chan, dma_addr_t addr) +{ + DMA_OUT(fsl_chan, &fsl_chan->reg_base->cdar, addr | FSL_DMA_SNEN, 64); +} + +static dma_addr_t get_cdar(struct fsl_dma_chan *fsl_chan) +{ + return DMA_IN(fsl_chan, &fsl_chan->reg_base->cdar, 64) & ~FSL_DMA_SNEN; +} + +static void set_ndar(struct fsl_dma_chan *fsl_chan, dma_addr_t addr) +{ + DMA_OUT(fsl_chan, &fsl_chan->reg_base->ndar, addr, 64); +} + +static dma_addr_t get_ndar(struct fsl_dma_chan *fsl_chan) +{ + return DMA_IN(fsl_chan, &fsl_chan->reg_base->ndar, 64); +} + +static int dma_is_idle(struct fsl_dma_chan *fsl_chan) +{ + u32 sr = get_sr(fsl_chan); + return (!(sr & FSL_DMA_SR_CB)) || (sr & FSL_DMA_SR_CH); +} + +static void dma_start(struct fsl_dma_chan *fsl_chan) +{ + u32 mr_set = 0;; + + if (fsl_chan->feature & FSL_DMA_CHAN_PAUSE_EXT) { + DMA_OUT(fsl_chan, &fsl_chan->reg_base->bcr, 0, 32); + mr_set |= FSL_DMA_MR_EMP_EN; + } else + DMA_OUT(fsl_chan, &fsl_chan->reg_base->mr, + DMA_IN(fsl_chan, &fsl_chan->reg_base->mr, 32) + & ~FSL_DMA_MR_EMP_EN, 32); + + if (fsl_chan->feature & FSL_DMA_CHAN_START_EXT) + mr_set |= FSL_DMA_MR_EMS_EN; + else + mr_set |= FSL_DMA_MR_CS; + + DMA_OUT(fsl_chan, &fsl_chan->reg_base->mr, + DMA_IN(fsl_chan, &fsl_chan->reg_base->mr, 32) + | mr_set, 32); +} + +static void dma_halt(struct fsl_dma_chan *fsl_chan) +{ + int i = 0; + DMA_OUT(fsl_chan, &fsl_chan->reg_base->mr, + DMA_IN(fsl_chan, &fsl_chan->reg_base->mr, 32) | FSL_DMA_MR_CA, + 32); + DMA_OUT(fsl_chan, &fsl_chan->reg_base->mr, + DMA_IN(fsl_chan, &fsl_chan->reg_base->mr, 32) & ~(FSL_DMA_MR_CS + | FSL_DMA_MR_EMS_EN | FSL_DMA_MR_CA), 32); + + while (!dma_is_idle(fsl_chan) && (i++ < 100)) + udelay(10); + if (i >= 100 && !dma_is_idle(fsl_chan)) + dev_err(fsl_chan->dev, "DMA halt timeout!\n"); +} + +static void set_ld_eol(struct fsl_dma_chan *fsl_chan, + struct fsl_desc_sw *desc) +{ + desc->hw.next_ln_addr = CPU_TO_DMA(fsl_chan, + DMA_TO_CPU(fsl_chan, desc->hw.next_ln_addr, 64) | FSL_DMA_EOL, + 64); +} + +static void append_ld_queue(struct fsl_dma_chan *fsl_chan, + struct fsl_desc_sw *new_desc) +{ + struct fsl_desc_sw *queue_tail = to_fsl_desc(fsl_chan->ld_queue.prev); + + if (list_empty(&fsl_chan->ld_queue)) + return; + + /* Link to the new descriptor physical address and + * Enable End-of-segment interrupt for + * the last link descriptor. + * (the previous node's next link descriptor) + * + * For FSL_DMA_IP_83xx, the snoop enable bit need be set. + */ + queue_tail->hw.next_ln_addr = CPU_TO_DMA(fsl_chan, + new_desc->async_tx.phys | FSL_DMA_EOSIE | + (((fsl_chan->feature & FSL_DMA_IP_MASK) + == FSL_DMA_IP_83XX) ? FSL_DMA_SNEN : 0), 64); +} + +/** + * fsl_chan_set_src_loop_size - Set source address hold transfer size + * @fsl_chan : Freescale DMA channel + * @size : Address loop size, 0 for disable loop + * + * The set source address hold transfer size. The source + * address hold or loop transfer size is when the DMA transfer + * data from source address (SA), if the loop size is 4, the DMA will + * read data from SA, SA + 1, SA + 2, SA + 3, then loop back to SA, + * SA + 1 ... and so on. + */ +static void fsl_chan_set_src_loop_size(struct fsl_dma_chan *fsl_chan, int size) +{ + switch (size) { + case 0: + DMA_OUT(fsl_chan, &fsl_chan->reg_base->mr, + DMA_IN(fsl_chan, &fsl_chan->reg_base->mr, 32) & + (~FSL_DMA_MR_SAHE), 32); + break; + case 1: + case 2: + case 4: + case 8: + DMA_OUT(fsl_chan, &fsl_chan->reg_base->mr, + DMA_IN(fsl_chan, &fsl_chan->reg_base->mr, 32) | + FSL_DMA_MR_SAHE | (__ilog2(size) << 14), + 32); + break; + } +} + +/** + * fsl_chan_set_dest_loop_size - Set destination address hold transfer size + * @fsl_chan : Freescale DMA channel + * @size : Address loop size, 0 for disable loop + * + * The set destination address hold transfer size. The destination + * address hold or loop transfer size is when the DMA transfer + * data to destination address (TA), if the loop size is 4, the DMA will + * write data to TA, TA + 1, TA + 2, TA + 3, then loop back to TA, + * TA + 1 ... and so on. + */ +static void fsl_chan_set_dest_loop_size(struct fsl_dma_chan *fsl_chan, int size) +{ + switch (size) { + case 0: + DMA_OUT(fsl_chan, &fsl_chan->reg_base->mr, + DMA_IN(fsl_chan, &fsl_chan->reg_base->mr, 32) & + (~FSL_DMA_MR_DAHE), 32); + break; + case 1: + case 2: + case 4: + case 8: + DMA_OUT(fsl_chan, &fsl_chan->reg_base->mr, + DMA_IN(fsl_chan, &fsl_chan->reg_base->mr, 32) | + FSL_DMA_MR_DAHE | (__ilog2(size) << 16), + 32); + break; + } +} + +/** + * fsl_chan_toggle_ext_pause - Toggle channel external pause status + * @fsl_chan : Freescale DMA channel + * @size : Pause control size, 0 for disable external pause control. + * The maximum is 1024. + * + * The Freescale DMA channel can be controlled by the external + * signal DREQ#. The pause control size is how many bytes are allowed + * to transfer before pausing the channel, after which a new assertion + * of DREQ# resumes channel operation. + */ +static void fsl_chan_toggle_ext_pause(struct fsl_dma_chan *fsl_chan, int size) +{ + if (size > 1024) + return; + + if (size) { + DMA_OUT(fsl_chan, &fsl_chan->reg_base->mr, + DMA_IN(fsl_chan, &fsl_chan->reg_base->mr, 32) + | ((__ilog2(size) << 24) & 0x0f000000), + 32); + fsl_chan->feature |= FSL_DMA_CHAN_PAUSE_EXT; + } else + fsl_chan->feature &= ~FSL_DMA_CHAN_PAUSE_EXT; +} + +/** + * fsl_chan_toggle_ext_start - Toggle channel external start status + * @fsl_chan : Freescale DMA channel + * @enable : 0 is disabled, 1 is enabled. + * + * If enable the external start, the channel can be started by an + * external DMA start pin. So the dma_start() does not start the + * transfer immediately. The DMA channel will wait for the + * control pin asserted. + */ +static void fsl_chan_toggle_ext_start(struct fsl_dma_chan *fsl_chan, int enable) +{ + if (enable) + fsl_chan->feature |= FSL_DMA_CHAN_START_EXT; + else + fsl_chan->feature &= ~FSL_DMA_CHAN_START_EXT; +} + +static dma_cookie_t fsl_dma_tx_submit(struct dma_async_tx_descriptor *tx) +{ + struct fsl_desc_sw *desc = tx_to_fsl_desc(tx); + struct fsl_dma_chan *fsl_chan = to_fsl_chan(tx->chan); + unsigned long flags; + dma_cookie_t cookie; + + /* cookie increment and adding to ld_queue must be atomic */ + spin_lock_irqsave(&fsl_chan->desc_lock, flags); + + cookie = fsl_chan->common.cookie; + cookie++; + if (cookie < 0) + cookie = 1; + desc->async_tx.cookie = cookie; + fsl_chan->common.cookie = desc->async_tx.cookie; + + append_ld_queue(fsl_chan, desc); + list_splice_init(&desc->async_tx.tx_list, fsl_chan->ld_queue.prev); + + spin_unlock_irqrestore(&fsl_chan->desc_lock, flags); + + return cookie; +} + +/** + * fsl_dma_alloc_descriptor - Allocate descriptor from channel's DMA pool. + * @fsl_chan : Freescale DMA channel + * + * Return - The descriptor allocated. NULL for failed. + */ +static struct fsl_desc_sw *fsl_dma_alloc_descriptor( + struct fsl_dma_chan *fsl_chan) +{ + dma_addr_t pdesc; + struct fsl_desc_sw *desc_sw; + + desc_sw = dma_pool_alloc(fsl_chan->desc_pool, GFP_ATOMIC, &pdesc); + if (desc_sw) { + memset(desc_sw, 0, sizeof(struct fsl_desc_sw)); + dma_async_tx_descriptor_init(&desc_sw->async_tx, + &fsl_chan->common); + desc_sw->async_tx.tx_submit = fsl_dma_tx_submit; + INIT_LIST_HEAD(&desc_sw->async_tx.tx_list); + desc_sw->async_tx.phys = pdesc; + } + + return desc_sw; +} + + +/** + * fsl_dma_alloc_chan_resources - Allocate resources for DMA channel. + * @fsl_chan : Freescale DMA channel + * + * This function will create a dma pool for descriptor allocation. + * + * Return - The number of descriptors allocated. + */ +static int fsl_dma_alloc_chan_resources(struct dma_chan *chan) +{ + struct fsl_dma_chan *fsl_chan = to_fsl_chan(chan); + LIST_HEAD(tmp_list); + + /* We need the descriptor to be aligned to 32bytes + * for meeting FSL DMA specification requirement. + */ + fsl_chan->desc_pool = dma_pool_create("fsl_dma_engine_desc_pool", + fsl_chan->dev, sizeof(struct fsl_desc_sw), + 32, 0); + if (!fsl_chan->desc_pool) { + dev_err(fsl_chan->dev, "No memory for channel %d " + "descriptor dma pool.\n", fsl_chan->id); + return 0; + } + + return 1; +} + +/** + * fsl_dma_free_chan_resources - Free all resources of the channel. + * @fsl_chan : Freescale DMA channel + */ +static void fsl_dma_free_chan_resources(struct dma_chan *chan) +{ + struct fsl_dma_chan *fsl_chan = to_fsl_chan(chan); + struct fsl_desc_sw *desc, *_desc; + unsigned long flags; + + dev_dbg(fsl_chan->dev, "Free all channel resources.\n"); + spin_lock_irqsave(&fsl_chan->desc_lock, flags); + list_for_each_entry_safe(desc, _desc, &fsl_chan->ld_queue, node) { +#ifdef FSL_DMA_LD_DEBUG + dev_dbg(fsl_chan->dev, + "LD %p will be released.\n", desc); +#endif + list_del(&desc->node); + /* free link descriptor */ + dma_pool_free(fsl_chan->desc_pool, desc, desc->async_tx.phys); + } + spin_unlock_irqrestore(&fsl_chan->desc_lock, flags); + dma_pool_destroy(fsl_chan->desc_pool); +} + +static struct dma_async_tx_descriptor *fsl_dma_prep_memcpy( + struct dma_chan *chan, dma_addr_t dma_dest, dma_addr_t dma_src, + size_t len, unsigned long flags) +{ + struct fsl_dma_chan *fsl_chan; + struct fsl_desc_sw *first = NULL, *prev = NULL, *new; + size_t copy; + LIST_HEAD(link_chain); + + if (!chan) + return NULL; + + if (!len) + return NULL; + + fsl_chan = to_fsl_chan(chan); + + do { + + /* Allocate the link descriptor from DMA pool */ + new = fsl_dma_alloc_descriptor(fsl_chan); + if (!new) { + dev_err(fsl_chan->dev, + "No free memory for link descriptor\n"); + return NULL; + } +#ifdef FSL_DMA_LD_DEBUG + dev_dbg(fsl_chan->dev, "new link desc alloc %p\n", new); +#endif + + copy = min(len, FSL_DMA_BCR_MAX_CNT); + + set_desc_cnt(fsl_chan, &new->hw, copy); + set_desc_src(fsl_chan, &new->hw, dma_src); + set_desc_dest(fsl_chan, &new->hw, dma_dest); + + if (!first) + first = new; + else + set_desc_next(fsl_chan, &prev->hw, new->async_tx.phys); + + new->async_tx.cookie = 0; + new->async_tx.ack = 1; + + prev = new; + len -= copy; + dma_src += copy; + dma_dest += copy; + + /* Insert the link descriptor to the LD ring */ + list_add_tail(&new->node, &first->async_tx.tx_list); + } while (len); + + new->async_tx.ack = 0; /* client is in control of this ack */ + new->async_tx.cookie = -EBUSY; + + /* Set End-of-link to the last link descriptor of new list*/ + set_ld_eol(fsl_chan, new); + + return first ? &first->async_tx : NULL; +} + +/** + * fsl_dma_update_completed_cookie - Update the completed cookie. + * @fsl_chan : Freescale DMA channel + */ +static void fsl_dma_update_completed_cookie(struct fsl_dma_chan *fsl_chan) +{ + struct fsl_desc_sw *cur_desc, *desc; + dma_addr_t ld_phy; + + ld_phy = get_cdar(fsl_chan) & FSL_DMA_NLDA_MASK; + + if (ld_phy) { + cur_desc = NULL; + list_for_each_entry(desc, &fsl_chan->ld_queue, node) + if (desc->async_tx.phys == ld_phy) { + cur_desc = desc; + break; + } + + if (cur_desc && cur_desc->async_tx.cookie) { + if (dma_is_idle(fsl_chan)) + fsl_chan->completed_cookie = + cur_desc->async_tx.cookie; + else + fsl_chan->completed_cookie = + cur_desc->async_tx.cookie - 1; + } + } +} + +/** + * fsl_chan_ld_cleanup - Clean up link descriptors + * @fsl_chan : Freescale DMA channel + * + * This function clean up the ld_queue of DMA channel. + * If 'in_intr' is set, the function will move the link descriptor to + * the recycle list. Otherwise, free it directly. + */ +static void fsl_chan_ld_cleanup(struct fsl_dma_chan *fsl_chan) +{ + struct fsl_desc_sw *desc, *_desc; + unsigned long flags; + + spin_lock_irqsave(&fsl_chan->desc_lock, flags); + + fsl_dma_update_completed_cookie(fsl_chan); + dev_dbg(fsl_chan->dev, "chan completed_cookie = %d\n", + fsl_chan->completed_cookie); + list_for_each_entry_safe(desc, _desc, &fsl_chan->ld_queue, node) { + dma_async_tx_callback callback; + void *callback_param; + + if (dma_async_is_complete(desc->async_tx.cookie, + fsl_chan->completed_cookie, fsl_chan->common.cookie) + == DMA_IN_PROGRESS) + break; + + callback = desc->async_tx.callback; + callback_param = desc->async_tx.callback_param; + + /* Remove from ld_queue list */ + list_del(&desc->node); + + dev_dbg(fsl_chan->dev, "link descriptor %p will be recycle.\n", + desc); + dma_pool_free(fsl_chan->desc_pool, desc, desc->async_tx.phys); + + /* Run the link descriptor callback function */ + if (callback) { + spin_unlock_irqrestore(&fsl_chan->desc_lock, flags); + dev_dbg(fsl_chan->dev, "link descriptor %p callback\n", + desc); + callback(callback_param); + spin_lock_irqsave(&fsl_chan->desc_lock, flags); + } + } + spin_unlock_irqrestore(&fsl_chan->desc_lock, flags); +} + +/** + * fsl_chan_xfer_ld_queue - Transfer link descriptors in channel ld_queue. + * @fsl_chan : Freescale DMA channel + */ +static void fsl_chan_xfer_ld_queue(struct fsl_dma_chan *fsl_chan) +{ + struct list_head *ld_node; + dma_addr_t next_dest_addr; + unsigned long flags; + + if (!dma_is_idle(fsl_chan)) + return; + + dma_halt(fsl_chan); + + /* If there are some link descriptors + * not transfered in queue. We need to start it. + */ + spin_lock_irqsave(&fsl_chan->desc_lock, flags); + + /* Find the first un-transfer desciptor */ + for (ld_node = fsl_chan->ld_queue.next; + (ld_node != &fsl_chan->ld_queue) + && (dma_async_is_complete( + to_fsl_desc(ld_node)->async_tx.cookie, + fsl_chan->completed_cookie, + fsl_chan->common.cookie) == DMA_SUCCESS); + ld_node = ld_node->next); + + spin_unlock_irqrestore(&fsl_chan->desc_lock, flags); + + if (ld_node != &fsl_chan->ld_queue) { + /* Get the ld start address from ld_queue */ + next_dest_addr = to_fsl_desc(ld_node)->async_tx.phys; + dev_dbg(fsl_chan->dev, "xfer LDs staring from 0x%016llx\n", + (u64)next_dest_addr); + set_cdar(fsl_chan, next_dest_addr); + dma_start(fsl_chan); + } else { + set_cdar(fsl_chan, 0); + set_ndar(fsl_chan, 0); + } +} + +/** + * fsl_dma_memcpy_issue_pending - Issue the DMA start command + * @fsl_chan : Freescale DMA channel + */ +static void fsl_dma_memcpy_issue_pending(struct dma_chan *chan) +{ + struct fsl_dma_chan *fsl_chan = to_fsl_chan(chan); + +#ifdef FSL_DMA_LD_DEBUG + struct fsl_desc_sw *ld; + unsigned long flags; + + spin_lock_irqsave(&fsl_chan->desc_lock, flags); + if (list_empty(&fsl_chan->ld_queue)) { + spin_unlock_irqrestore(&fsl_chan->desc_lock, flags); + return; + } + + dev_dbg(fsl_chan->dev, "--memcpy issue--\n"); + list_for_each_entry(ld, &fsl_chan->ld_queue, node) { + int i; + dev_dbg(fsl_chan->dev, "Ch %d, LD %08x\n", + fsl_chan->id, ld->async_tx.phys); + for (i = 0; i < 8; i++) + dev_dbg(fsl_chan->dev, "LD offset %d: %08x\n", + i, *(((u32 *)&ld->hw) + i)); + } + dev_dbg(fsl_chan->dev, "----------------\n"); + spin_unlock_irqrestore(&fsl_chan->desc_lock, flags); +#endif + + fsl_chan_xfer_ld_queue(fsl_chan); +} + +static void fsl_dma_dependency_added(struct dma_chan *chan) +{ + struct fsl_dma_chan *fsl_chan = to_fsl_chan(chan); + + fsl_chan_ld_cleanup(fsl_chan); +} + +/** + * fsl_dma_is_complete - Determine the DMA status + * @fsl_chan : Freescale DMA channel + */ +static enum dma_status fsl_dma_is_complete(struct dma_chan *chan, + dma_cookie_t cookie, + dma_cookie_t *done, + dma_cookie_t *used) +{ + struct fsl_dma_chan *fsl_chan = to_fsl_chan(chan); + dma_cookie_t last_used; + dma_cookie_t last_complete; + + fsl_chan_ld_cleanup(fsl_chan); + + last_used = chan->cookie; + last_complete = fsl_chan->completed_cookie; + + if (done) + *done = last_complete; + + if (used) + *used = last_used; + + return dma_async_is_complete(cookie, last_complete, last_used); +} + +static irqreturn_t fsl_dma_chan_do_interrupt(int irq, void *data) +{ + struct fsl_dma_chan *fsl_chan = (struct fsl_dma_chan *)data; + dma_addr_t stat; + + stat = get_sr(fsl_chan); + dev_dbg(fsl_chan->dev, "event: channel %d, stat = 0x%x\n", + fsl_chan->id, stat); + set_sr(fsl_chan, stat); /* Clear the event register */ + + stat &= ~(FSL_DMA_SR_CB | FSL_DMA_SR_CH); + if (!stat) + return IRQ_NONE; + + if (stat & FSL_DMA_SR_TE) + dev_err(fsl_chan->dev, "Transfer Error!\n"); + + /* If the link descriptor segment transfer finishes, + * we will recycle the used descriptor. + */ + if (stat & FSL_DMA_SR_EOSI) { + dev_dbg(fsl_chan->dev, "event: End-of-segments INT\n"); + dev_dbg(fsl_chan->dev, "event: clndar 0x%016llx, " + "nlndar 0x%016llx\n", (u64)get_cdar(fsl_chan), + (u64)get_ndar(fsl_chan)); + stat &= ~FSL_DMA_SR_EOSI; + } + + /* If it current transfer is the end-of-transfer, + * we should clear the Channel Start bit for + * prepare next transfer. + */ + if (stat & (FSL_DMA_SR_EOLNI | FSL_DMA_SR_EOCDI)) { + dev_dbg(fsl_chan->dev, "event: End-of-link INT\n"); + stat &= ~FSL_DMA_SR_EOLNI; + fsl_chan_xfer_ld_queue(fsl_chan); + } + + if (stat) + dev_dbg(fsl_chan->dev, "event: unhandled sr 0x%02x\n", + stat); + + dev_dbg(fsl_chan->dev, "event: Exit\n"); + tasklet_schedule(&fsl_chan->tasklet); + return IRQ_HANDLED; +} + +static irqreturn_t fsl_dma_do_interrupt(int irq, void *data) +{ + struct fsl_dma_device *fdev = (struct fsl_dma_device *)data; + u32 gsr; + int ch_nr; + + gsr = (fdev->feature & FSL_DMA_BIG_ENDIAN) ? in_be32(fdev->reg_base) + : in_le32(fdev->reg_base); + ch_nr = (32 - ffs(gsr)) / 8; + + return fdev->chan[ch_nr] ? fsl_dma_chan_do_interrupt(irq, + fdev->chan[ch_nr]) : IRQ_NONE; +} + +static void dma_do_tasklet(unsigned long data) +{ + struct fsl_dma_chan *fsl_chan = (struct fsl_dma_chan *)data; + fsl_chan_ld_cleanup(fsl_chan); +} + +static void fsl_dma_callback_test(struct fsl_dma_chan *fsl_chan) +{ + if (fsl_chan) + dev_info(fsl_chan->dev, "selftest: callback is ok!\n"); +} + +static int fsl_dma_self_test(struct fsl_dma_chan *fsl_chan) +{ + struct dma_chan *chan; + int err = 0; + dma_addr_t dma_dest, dma_src; + dma_cookie_t cookie; + u8 *src, *dest; + int i; + size_t test_size; + struct dma_async_tx_descriptor *tx1, *tx2, *tx3; + + test_size = 4096; + + src = kmalloc(test_size * 2, GFP_KERNEL); + if (!src) { + dev_err(fsl_chan->dev, + "selftest: Cannot alloc memory for test!\n"); + err = -ENOMEM; + goto out; + } + + dest = src + test_size; + + for (i = 0; i < test_size; i++) + src[i] = (u8) i; + + chan = &fsl_chan->common; + + if (fsl_dma_alloc_chan_resources(chan) < 1) { + dev_err(fsl_chan->dev, + "selftest: Cannot alloc resources for DMA\n"); + err = -ENODEV; + goto out; + } + + /* TX 1 */ + dma_src = dma_map_single(fsl_chan->dev, src, test_size / 2, + DMA_TO_DEVICE); + dma_dest = dma_map_single(fsl_chan->dev, dest, test_size / 2, + DMA_FROM_DEVICE); + tx1 = fsl_dma_prep_memcpy(chan, dma_dest, dma_src, test_size / 2, 0); + async_tx_ack(tx1); + + cookie = fsl_dma_tx_submit(tx1); + fsl_dma_memcpy_issue_pending(chan); + msleep(2); + + if (fsl_dma_is_complete(chan, cookie, NULL, NULL) != DMA_SUCCESS) { + dev_err(fsl_chan->dev, "selftest: Time out!\n"); + err = -ENODEV; + goto out; + } + + /* Test free and re-alloc channel resources */ + fsl_dma_free_chan_resources(chan); + + if (fsl_dma_alloc_chan_resources(chan) < 1) { + dev_err(fsl_chan->dev, + "selftest: Cannot alloc resources for DMA\n"); + err = -ENODEV; + goto free_resources; + } + + /* Continue to test + * TX 2 + */ + dma_src = dma_map_single(fsl_chan->dev, src + test_size / 2, + test_size / 4, DMA_TO_DEVICE); + dma_dest = dma_map_single(fsl_chan->dev, dest + test_size / 2, + test_size / 4, DMA_FROM_DEVICE); + tx2 = fsl_dma_prep_memcpy(chan, dma_dest, dma_src, test_size / 4, 0); + async_tx_ack(tx2); + + /* TX 3 */ + dma_src = dma_map_single(fsl_chan->dev, src + test_size * 3 / 4, + test_size / 4, DMA_TO_DEVICE); + dma_dest = dma_map_single(fsl_chan->dev, dest + test_size * 3 / 4, + test_size / 4, DMA_FROM_DEVICE); + tx3 = fsl_dma_prep_memcpy(chan, dma_dest, dma_src, test_size / 4, 0); + async_tx_ack(tx3); + + /* Test exchanging the prepared tx sort */ + cookie = fsl_dma_tx_submit(tx3); + cookie = fsl_dma_tx_submit(tx2); + +#ifdef FSL_DMA_CALLBACKTEST + if (dma_has_cap(DMA_INTERRUPT, ((struct fsl_dma_device *) + dev_get_drvdata(fsl_chan->dev->parent))->common.cap_mask)) { + tx3->callback = fsl_dma_callback_test; + tx3->callback_param = fsl_chan; + } +#endif + fsl_dma_memcpy_issue_pending(chan); + msleep(2); + + if (fsl_dma_is_complete(chan, cookie, NULL, NULL) != DMA_SUCCESS) { + dev_err(fsl_chan->dev, "selftest: Time out!\n"); + err = -ENODEV; + goto free_resources; + } + + err = memcmp(src, dest, test_size); + if (err) { + for (i = 0; (*(src + i) == *(dest + i)) && (i < test_size); + i++); + dev_err(fsl_chan->dev, "selftest: Test failed, data %d/%d is " + "error! src 0x%x, dest 0x%x\n", + i, test_size, *(src + i), *(dest + i)); + } + +free_resources: + fsl_dma_free_chan_resources(chan); +out: + kfree(src); + return err; +} + +static int __devinit of_fsl_dma_chan_probe(struct of_device *dev, + const struct of_device_id *match) +{ + struct fsl_dma_device *fdev; + struct fsl_dma_chan *new_fsl_chan; + int err; + + fdev = dev_get_drvdata(dev->dev.parent); + BUG_ON(!fdev); + + /* alloc channel */ + new_fsl_chan = kzalloc(sizeof(struct fsl_dma_chan), GFP_KERNEL); + if (!new_fsl_chan) { + dev_err(&dev->dev, "No free memory for allocating " + "dma channels!\n"); + err = -ENOMEM; + goto err; + } + + /* get dma channel register base */ + err = of_address_to_resource(dev->node, 0, &new_fsl_chan->reg); + if (err) { + dev_err(&dev->dev, "Can't get %s property 'reg'\n", + dev->node->full_name); + goto err; + } + + new_fsl_chan->feature = *(u32 *)match->data; + + if (!fdev->feature) + fdev->feature = new_fsl_chan->feature; + + /* If the DMA device's feature is different than its channels', + * report the bug. + */ + WARN_ON(fdev->feature != new_fsl_chan->feature); + + new_fsl_chan->dev = &dev->dev; + new_fsl_chan->reg_base = ioremap(new_fsl_chan->reg.start, + new_fsl_chan->reg.end - new_fsl_chan->reg.start + 1); + + new_fsl_chan->id = ((new_fsl_chan->reg.start - 0x100) & 0xfff) >> 7; + if (new_fsl_chan->id > FSL_DMA_MAX_CHANS_PER_DEVICE) { + dev_err(&dev->dev, "There is no %d channel!\n", + new_fsl_chan->id); + err = -EINVAL; + goto err; + } + fdev->chan[new_fsl_chan->id] = new_fsl_chan; + tasklet_init(&new_fsl_chan->tasklet, dma_do_tasklet, + (unsigned long)new_fsl_chan); + + /* Init the channel */ + dma_init(new_fsl_chan); + + /* Clear cdar registers */ + set_cdar(new_fsl_chan, 0); + + switch (new_fsl_chan->feature & FSL_DMA_IP_MASK) { + case FSL_DMA_IP_85XX: + new_fsl_chan->toggle_ext_start = fsl_chan_toggle_ext_start; + new_fsl_chan->toggle_ext_pause = fsl_chan_toggle_ext_pause; + case FSL_DMA_IP_83XX: + new_fsl_chan->set_src_loop_size = fsl_chan_set_src_loop_size; + new_fsl_chan->set_dest_loop_size = fsl_chan_set_dest_loop_size; + } + + spin_lock_init(&new_fsl_chan->desc_lock); + INIT_LIST_HEAD(&new_fsl_chan->ld_queue); + + new_fsl_chan->common.device = &fdev->common; + + /* Add the channel to DMA device channel list */ + list_add_tail(&new_fsl_chan->common.device_node, + &fdev->common.channels); + fdev->common.chancnt++; + + new_fsl_chan->irq = irq_of_parse_and_map(dev->node, 0); + if (new_fsl_chan->irq != NO_IRQ) { + err = request_irq(new_fsl_chan->irq, + &fsl_dma_chan_do_interrupt, IRQF_SHARED, + "fsldma-channel", new_fsl_chan); + if (err) { + dev_err(&dev->dev, "DMA channel %s request_irq error " + "with return %d\n", dev->node->full_name, err); + goto err; + } + } + +#ifdef CONFIG_FSL_DMA_SELFTEST + err = fsl_dma_self_test(new_fsl_chan); + if (err) + goto err; +#endif + + dev_info(&dev->dev, "#%d (%s), irq %d\n", new_fsl_chan->id, + match->compatible, new_fsl_chan->irq); + + return 0; +err: + dma_halt(new_fsl_chan); + iounmap(new_fsl_chan->reg_base); + free_irq(new_fsl_chan->irq, new_fsl_chan); + list_del(&new_fsl_chan->common.device_node); + kfree(new_fsl_chan); + return err; +} + +const u32 mpc8540_dma_ip_feature = FSL_DMA_IP_85XX | FSL_DMA_BIG_ENDIAN; +const u32 mpc8349_dma_ip_feature = FSL_DMA_IP_83XX | FSL_DMA_LITTLE_ENDIAN; + +static struct of_device_id of_fsl_dma_chan_ids[] = { + { + .compatible = "fsl,mpc8540-dma-channel", + .data = (void *)&mpc8540_dma_ip_feature, + }, + { + .compatible = "fsl,mpc8349-dma-channel", + .data = (void *)&mpc8349_dma_ip_feature, + }, + {} +}; + +static struct of_platform_driver of_fsl_dma_chan_driver = { + .name = "of-fsl-dma-channel", + .match_table = of_fsl_dma_chan_ids, + .probe = of_fsl_dma_chan_probe, +}; + +static __init int of_fsl_dma_chan_init(void) +{ + return of_register_platform_driver(&of_fsl_dma_chan_driver); +} + +static int __devinit of_fsl_dma_probe(struct of_device *dev, + const struct of_device_id *match) +{ + int err; + unsigned int irq; + struct fsl_dma_device *fdev; + + fdev = kzalloc(sizeof(struct fsl_dma_device), GFP_KERNEL); + if (!fdev) { + dev_err(&dev->dev, "No enough memory for 'priv'\n"); + err = -ENOMEM; + goto err; + } + fdev->dev = &dev->dev; + INIT_LIST_HEAD(&fdev->common.channels); + + /* get DMA controller register base */ + err = of_address_to_resource(dev->node, 0, &fdev->reg); + if (err) { + dev_err(&dev->dev, "Can't get %s property 'reg'\n", + dev->node->full_name); + goto err; + } + + dev_info(&dev->dev, "Probe the Freescale DMA driver for %s " + "controller at 0x%08x...\n", + match->compatible, fdev->reg.start); + fdev->reg_base = ioremap(fdev->reg.start, fdev->reg.end + - fdev->reg.start + 1); + + dma_cap_set(DMA_MEMCPY, fdev->common.cap_mask); + dma_cap_set(DMA_INTERRUPT, fdev->common.cap_mask); + fdev->common.device_alloc_chan_resources = fsl_dma_alloc_chan_resources; + fdev->common.device_free_chan_resources = fsl_dma_free_chan_resources; + fdev->common.device_prep_dma_memcpy = fsl_dma_prep_memcpy; + fdev->common.device_is_tx_complete = fsl_dma_is_complete; + fdev->common.device_issue_pending = fsl_dma_memcpy_issue_pending; + fdev->common.device_dependency_added = fsl_dma_dependency_added; + fdev->common.dev = &dev->dev; + + irq = irq_of_parse_and_map(dev->node, 0); + if (irq != NO_IRQ) { + err = request_irq(irq, &fsl_dma_do_interrupt, IRQF_SHARED, + "fsldma-device", fdev); + if (err) { + dev_err(&dev->dev, "DMA device request_irq error " + "with return %d\n", err); + goto err; + } + } + + dev_set_drvdata(&(dev->dev), fdev); + of_platform_bus_probe(dev->node, of_fsl_dma_chan_ids, &dev->dev); + + dma_async_device_register(&fdev->common); + return 0; + +err: + iounmap(fdev->reg_base); + kfree(fdev); + return err; +} + +static struct of_device_id of_fsl_dma_ids[] = { + { .compatible = "fsl,mpc8540-dma", }, + { .compatible = "fsl,mpc8349-dma", }, + {} +}; + +static struct of_platform_driver of_fsl_dma_driver = { + .name = "of-fsl-dma", + .match_table = of_fsl_dma_ids, + .probe = of_fsl_dma_probe, +}; + +static __init int of_fsl_dma_init(void) +{ + return of_register_platform_driver(&of_fsl_dma_driver); +} + +subsys_initcall(of_fsl_dma_chan_init); +subsys_initcall(of_fsl_dma_init); diff --git a/drivers/dma/fsldma.h b/drivers/dma/fsldma.h new file mode 100644 index 000000000000..ba78c42121ba --- /dev/null +++ b/drivers/dma/fsldma.h @@ -0,0 +1,189 @@ +/* + * Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved. + * + * Author: + * Zhang Wei <wei.zhang@freescale.com>, Jul 2007 + * Ebony Zhu <ebony.zhu@freescale.com>, May 2007 + * + * This is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ +#ifndef __DMA_FSLDMA_H +#define __DMA_FSLDMA_H + +#include <linux/device.h> +#include <linux/dmapool.h> +#include <linux/dmaengine.h> + +/* Define data structures needed by Freescale + * MPC8540 and MPC8349 DMA controller. + */ +#define FSL_DMA_MR_CS 0x00000001 +#define FSL_DMA_MR_CC 0x00000002 +#define FSL_DMA_MR_CA 0x00000008 +#define FSL_DMA_MR_EIE 0x00000040 +#define FSL_DMA_MR_XFE 0x00000020 +#define FSL_DMA_MR_EOLNIE 0x00000100 +#define FSL_DMA_MR_EOLSIE 0x00000080 +#define FSL_DMA_MR_EOSIE 0x00000200 +#define FSL_DMA_MR_CDSM 0x00000010 +#define FSL_DMA_MR_CTM 0x00000004 +#define FSL_DMA_MR_EMP_EN 0x00200000 +#define FSL_DMA_MR_EMS_EN 0x00040000 +#define FSL_DMA_MR_DAHE 0x00002000 +#define FSL_DMA_MR_SAHE 0x00001000 + +/* Special MR definition for MPC8349 */ +#define FSL_DMA_MR_EOTIE 0x00000080 + +#define FSL_DMA_SR_CH 0x00000020 +#define FSL_DMA_SR_CB 0x00000004 +#define FSL_DMA_SR_TE 0x00000080 +#define FSL_DMA_SR_EOSI 0x00000002 +#define FSL_DMA_SR_EOLSI 0x00000001 +#define FSL_DMA_SR_EOCDI 0x00000001 +#define FSL_DMA_SR_EOLNI 0x00000008 + +#define FSL_DMA_SATR_SBPATMU 0x20000000 +#define FSL_DMA_SATR_STRANSINT_RIO 0x00c00000 +#define FSL_DMA_SATR_SREADTYPE_SNOOP_READ 0x00050000 +#define FSL_DMA_SATR_SREADTYPE_BP_IORH 0x00020000 +#define FSL_DMA_SATR_SREADTYPE_BP_NREAD 0x00040000 +#define FSL_DMA_SATR_SREADTYPE_BP_MREAD 0x00070000 + +#define FSL_DMA_DATR_DBPATMU 0x20000000 +#define FSL_DMA_DATR_DTRANSINT_RIO 0x00c00000 +#define FSL_DMA_DATR_DWRITETYPE_SNOOP_WRITE 0x00050000 +#define FSL_DMA_DATR_DWRITETYPE_BP_FLUSH 0x00010000 + +#define FSL_DMA_EOL ((u64)0x1) +#define FSL_DMA_SNEN ((u64)0x10) +#define FSL_DMA_EOSIE 0x8 +#define FSL_DMA_NLDA_MASK (~(u64)0x1f) + +#define FSL_DMA_BCR_MAX_CNT 0x03ffffffu + +#define FSL_DMA_DGSR_TE 0x80 +#define FSL_DMA_DGSR_CH 0x20 +#define FSL_DMA_DGSR_PE 0x10 +#define FSL_DMA_DGSR_EOLNI 0x08 +#define FSL_DMA_DGSR_CB 0x04 +#define FSL_DMA_DGSR_EOSI 0x02 +#define FSL_DMA_DGSR_EOLSI 0x01 + +struct fsl_dma_ld_hw { + u64 __bitwise src_addr; + u64 __bitwise dst_addr; + u64 __bitwise next_ln_addr; + u32 __bitwise count; + u32 __bitwise reserve; +} __attribute__((aligned(32))); + +struct fsl_desc_sw { + struct fsl_dma_ld_hw hw; + struct list_head node; + struct dma_async_tx_descriptor async_tx; + struct list_head *ld; + void *priv; +} __attribute__((aligned(32))); + +struct fsl_dma_chan_regs { + u32 __bitwise mr; /* 0x00 - Mode Register */ + u32 __bitwise sr; /* 0x04 - Status Register */ + u64 __bitwise cdar; /* 0x08 - Current descriptor address register */ + u64 __bitwise sar; /* 0x10 - Source Address Register */ + u64 __bitwise dar; /* 0x18 - Destination Address Register */ + u32 __bitwise bcr; /* 0x20 - Byte Count Register */ + u64 __bitwise ndar; /* 0x24 - Next Descriptor Address Register */ +}; + +struct fsl_dma_chan; +#define FSL_DMA_MAX_CHANS_PER_DEVICE 4 + +struct fsl_dma_device { + void __iomem *reg_base; /* DGSR register base */ + struct resource reg; /* Resource for register */ + struct device *dev; + struct dma_device common; + struct fsl_dma_chan *chan[FSL_DMA_MAX_CHANS_PER_DEVICE]; + u32 feature; /* The same as DMA channels */ +}; + +/* Define macros for fsl_dma_chan->feature property */ +#define FSL_DMA_LITTLE_ENDIAN 0x00000000 +#define FSL_DMA_BIG_ENDIAN 0x00000001 + +#define FSL_DMA_IP_MASK 0x00000ff0 +#define FSL_DMA_IP_85XX 0x00000010 +#define FSL_DMA_IP_83XX 0x00000020 + +#define FSL_DMA_CHAN_PAUSE_EXT 0x00001000 +#define FSL_DMA_CHAN_START_EXT 0x00002000 + +struct fsl_dma_chan { + struct fsl_dma_chan_regs __iomem *reg_base; + dma_cookie_t completed_cookie; /* The maximum cookie completed */ + spinlock_t desc_lock; /* Descriptor operation lock */ + struct list_head ld_queue; /* Link descriptors queue */ + struct dma_chan common; /* DMA common channel */ + struct dma_pool *desc_pool; /* Descriptors pool */ + struct device *dev; /* Channel device */ + struct resource reg; /* Resource for register */ + int irq; /* Channel IRQ */ + int id; /* Raw id of this channel */ + struct tasklet_struct tasklet; + u32 feature; + + void (*toggle_ext_pause)(struct fsl_dma_chan *fsl_chan, int size); + void (*toggle_ext_start)(struct fsl_dma_chan *fsl_chan, int enable); + void (*set_src_loop_size)(struct fsl_dma_chan *fsl_chan, int size); + void (*set_dest_loop_size)(struct fsl_dma_chan *fsl_chan, int size); +}; + +#define to_fsl_chan(chan) container_of(chan, struct fsl_dma_chan, common) +#define to_fsl_desc(lh) container_of(lh, struct fsl_desc_sw, node) +#define tx_to_fsl_desc(tx) container_of(tx, struct fsl_desc_sw, async_tx) + +#ifndef __powerpc64__ +static u64 in_be64(const u64 __iomem *addr) +{ + return ((u64)in_be32((u32 *)addr) << 32) | (in_be32((u32 *)addr + 1)); +} + +static void out_be64(u64 __iomem *addr, u64 val) +{ + out_be32((u32 *)addr, val >> 32); + out_be32((u32 *)addr + 1, (u32)val); +} + +/* There is no asm instructions for 64 bits reverse loads and stores */ +static u64 in_le64(const u64 __iomem *addr) +{ + return ((u64)in_le32((u32 *)addr + 1) << 32) | (in_le32((u32 *)addr)); +} + +static void out_le64(u64 __iomem *addr, u64 val) +{ + out_le32((u32 *)addr + 1, val >> 32); + out_le32((u32 *)addr, (u32)val); +} +#endif + +#define DMA_IN(fsl_chan, addr, width) \ + (((fsl_chan)->feature & FSL_DMA_BIG_ENDIAN) ? \ + in_be##width(addr) : in_le##width(addr)) +#define DMA_OUT(fsl_chan, addr, val, width) \ + (((fsl_chan)->feature & FSL_DMA_BIG_ENDIAN) ? \ + out_be##width(addr, val) : out_le##width(addr, val)) + +#define DMA_TO_CPU(fsl_chan, d, width) \ + (((fsl_chan)->feature & FSL_DMA_BIG_ENDIAN) ? \ + be##width##_to_cpu(d) : le##width##_to_cpu(d)) +#define CPU_TO_DMA(fsl_chan, c, width) \ + (((fsl_chan)->feature & FSL_DMA_BIG_ENDIAN) ? \ + cpu_to_be##width(c) : cpu_to_le##width(c)) + +#endif /* __DMA_FSLDMA_H */ diff --git a/drivers/dma/ioat_dma.c b/drivers/dma/ioat_dma.c index dff38accc5c1..4017d9e7acd2 100644 --- a/drivers/dma/ioat_dma.c +++ b/drivers/dma/ioat_dma.c @@ -714,6 +714,7 @@ static struct dma_async_tx_descriptor *ioat1_dma_prep_memcpy( new->len = len; new->dst = dma_dest; new->src = dma_src; + new->async_tx.ack = 0; return &new->async_tx; } else return NULL; @@ -741,6 +742,7 @@ static struct dma_async_tx_descriptor *ioat2_dma_prep_memcpy( new->len = len; new->dst = dma_dest; new->src = dma_src; + new->async_tx.ack = 0; return &new->async_tx; } else return NULL; diff --git a/drivers/firewire/fw-card.c b/drivers/firewire/fw-card.c index 3e9719948a8e..a03462750b95 100644 --- a/drivers/firewire/fw-card.c +++ b/drivers/firewire/fw-card.c @@ -18,6 +18,7 @@ #include <linux/module.h> #include <linux/errno.h> +#include <linux/delay.h> #include <linux/device.h> #include <linux/mutex.h> #include <linux/crc-itu-t.h> @@ -214,17 +215,29 @@ static void fw_card_bm_work(struct work_struct *work) { struct fw_card *card = container_of(work, struct fw_card, work.work); - struct fw_device *root; + struct fw_device *root_device; + struct fw_node *root_node, *local_node; struct bm_data bmd; unsigned long flags; int root_id, new_root_id, irm_id, gap_count, generation, grace; int do_reset = 0; spin_lock_irqsave(&card->lock, flags); + local_node = card->local_node; + root_node = card->root_node; + + if (local_node == NULL) { + spin_unlock_irqrestore(&card->lock, flags); + return; + } + fw_node_get(local_node); + fw_node_get(root_node); generation = card->generation; - root = card->root_node->data; - root_id = card->root_node->node_id; + root_device = root_node->data; + if (root_device) + fw_device_get(root_device); + root_id = root_node->node_id; grace = time_after(jiffies, card->reset_jiffies + DIV_ROUND_UP(HZ, 10)); if (card->bm_generation + 1 == generation || @@ -243,14 +256,14 @@ fw_card_bm_work(struct work_struct *work) irm_id = card->irm_node->node_id; if (!card->irm_node->link_on) { - new_root_id = card->local_node->node_id; + new_root_id = local_node->node_id; fw_notify("IRM has link off, making local node (%02x) root.\n", new_root_id); goto pick_me; } bmd.lock.arg = cpu_to_be32(0x3f); - bmd.lock.data = cpu_to_be32(card->local_node->node_id); + bmd.lock.data = cpu_to_be32(local_node->node_id); spin_unlock_irqrestore(&card->lock, flags); @@ -267,12 +280,12 @@ fw_card_bm_work(struct work_struct *work) * Another bus reset happened. Just return, * the BM work has been rescheduled. */ - return; + goto out; } if (bmd.rcode == RCODE_COMPLETE && bmd.old != 0x3f) /* Somebody else is BM, let them do the work. */ - return; + goto out; spin_lock_irqsave(&card->lock, flags); if (bmd.rcode != RCODE_COMPLETE) { @@ -282,7 +295,7 @@ fw_card_bm_work(struct work_struct *work) * do a bus reset and pick the local node as * root, and thus, IRM. */ - new_root_id = card->local_node->node_id; + new_root_id = local_node->node_id; fw_notify("BM lock failed, making local node (%02x) root.\n", new_root_id); goto pick_me; @@ -295,7 +308,7 @@ fw_card_bm_work(struct work_struct *work) */ spin_unlock_irqrestore(&card->lock, flags); schedule_delayed_work(&card->work, DIV_ROUND_UP(HZ, 10)); - return; + goto out; } /* @@ -305,20 +318,20 @@ fw_card_bm_work(struct work_struct *work) */ card->bm_generation = generation; - if (root == NULL) { + if (root_device == NULL) { /* * Either link_on is false, or we failed to read the * config rom. In either case, pick another root. */ - new_root_id = card->local_node->node_id; - } else if (atomic_read(&root->state) != FW_DEVICE_RUNNING) { + new_root_id = local_node->node_id; + } else if (atomic_read(&root_device->state) != FW_DEVICE_RUNNING) { /* * If we haven't probed this device yet, bail out now * and let's try again once that's done. */ spin_unlock_irqrestore(&card->lock, flags); - return; - } else if (root->config_rom[2] & BIB_CMC) { + goto out; + } else if (root_device->config_rom[2] & BIB_CMC) { /* * FIXME: I suppose we should set the cmstr bit in the * STATE_CLEAR register of this node, as described in @@ -332,7 +345,7 @@ fw_card_bm_work(struct work_struct *work) * successfully read the config rom, but it's not * cycle master capable. */ - new_root_id = card->local_node->node_id; + new_root_id = local_node->node_id; } pick_me: @@ -341,8 +354,8 @@ fw_card_bm_work(struct work_struct *work) * the typically much larger 1394b beta repeater delays though. */ if (!card->beta_repeaters_present && - card->root_node->max_hops < ARRAY_SIZE(gap_count_table)) - gap_count = gap_count_table[card->root_node->max_hops]; + root_node->max_hops < ARRAY_SIZE(gap_count_table)) + gap_count = gap_count_table[root_node->max_hops]; else gap_count = 63; @@ -364,6 +377,11 @@ fw_card_bm_work(struct work_struct *work) fw_send_phy_config(card, new_root_id, generation, gap_count); fw_core_initiate_bus_reset(card, 1); } + out: + if (root_device) + fw_device_put(root_device); + fw_node_put(root_node); + fw_node_put(local_node); } static void @@ -381,6 +399,7 @@ fw_card_initialize(struct fw_card *card, const struct fw_card_driver *driver, static atomic_t index = ATOMIC_INIT(-1); kref_init(&card->kref); + atomic_set(&card->device_count, 0); card->index = atomic_inc_return(&index); card->driver = driver; card->device = device; @@ -511,8 +530,14 @@ fw_core_remove_card(struct fw_card *card) card->driver = &dummy_driver; fw_destroy_nodes(card); - flush_scheduled_work(); + /* + * Wait for all device workqueue jobs to finish. Otherwise the + * firewire-core module could be unloaded before the jobs ran. + */ + while (atomic_read(&card->device_count) > 0) + msleep(100); + cancel_delayed_work_sync(&card->work); fw_flush_transactions(card); del_timer_sync(&card->flush_timer); diff --git a/drivers/firewire/fw-cdev.c b/drivers/firewire/fw-cdev.c index 7e73cbaa4121..46bc197a047f 100644 --- a/drivers/firewire/fw-cdev.c +++ b/drivers/firewire/fw-cdev.c @@ -109,15 +109,17 @@ static int fw_device_op_open(struct inode *inode, struct file *file) struct client *client; unsigned long flags; - device = fw_device_from_devt(inode->i_rdev); + device = fw_device_get_by_devt(inode->i_rdev); if (device == NULL) return -ENODEV; client = kzalloc(sizeof(*client), GFP_KERNEL); - if (client == NULL) + if (client == NULL) { + fw_device_put(device); return -ENOMEM; + } - client->device = fw_device_get(device); + client->device = device; INIT_LIST_HEAD(&client->event_list); INIT_LIST_HEAD(&client->resource_list); spin_lock_init(&client->lock); @@ -644,6 +646,10 @@ static int ioctl_create_iso_context(struct client *client, void *buffer) struct fw_cdev_create_iso_context *request = buffer; struct fw_iso_context *context; + /* We only support one context at this time. */ + if (client->iso_context != NULL) + return -EBUSY; + if (request->channel > 63) return -EINVAL; @@ -790,8 +796,9 @@ static int ioctl_start_iso(struct client *client, void *buffer) { struct fw_cdev_start_iso *request = buffer; - if (request->handle != 0) + if (client->iso_context == NULL || request->handle != 0) return -EINVAL; + if (client->iso_context->type == FW_ISO_CONTEXT_RECEIVE) { if (request->tags == 0 || request->tags > 15) return -EINVAL; @@ -808,7 +815,7 @@ static int ioctl_stop_iso(struct client *client, void *buffer) { struct fw_cdev_stop_iso *request = buffer; - if (request->handle != 0) + if (client->iso_context == NULL || request->handle != 0) return -EINVAL; return fw_iso_context_stop(client->iso_context); diff --git a/drivers/firewire/fw-device.c b/drivers/firewire/fw-device.c index de9066e69adf..870125a3638e 100644 --- a/drivers/firewire/fw-device.c +++ b/drivers/firewire/fw-device.c @@ -150,21 +150,10 @@ struct bus_type fw_bus_type = { }; EXPORT_SYMBOL(fw_bus_type); -struct fw_device *fw_device_get(struct fw_device *device) -{ - get_device(&device->device); - - return device; -} - -void fw_device_put(struct fw_device *device) -{ - put_device(&device->device); -} - static void fw_device_release(struct device *dev) { struct fw_device *device = fw_device(dev); + struct fw_card *card = device->card; unsigned long flags; /* @@ -176,9 +165,9 @@ static void fw_device_release(struct device *dev) spin_unlock_irqrestore(&device->card->lock, flags); fw_node_put(device->node); - fw_card_put(device->card); kfree(device->config_rom); kfree(device); + atomic_dec(&card->device_count); } int fw_device_enable_phys_dma(struct fw_device *device) @@ -358,12 +347,9 @@ static ssize_t guid_show(struct device *dev, struct device_attribute *attr, char *buf) { struct fw_device *device = fw_device(dev); - u64 guid; - - guid = ((u64)device->config_rom[3] << 32) | device->config_rom[4]; - return snprintf(buf, PAGE_SIZE, "0x%016llx\n", - (unsigned long long)guid); + return snprintf(buf, PAGE_SIZE, "0x%08x%08x\n", + device->config_rom[3], device->config_rom[4]); } static struct device_attribute fw_device_attributes[] = { @@ -610,12 +596,14 @@ static DECLARE_RWSEM(idr_rwsem); static DEFINE_IDR(fw_device_idr); int fw_cdev_major; -struct fw_device *fw_device_from_devt(dev_t devt) +struct fw_device *fw_device_get_by_devt(dev_t devt) { struct fw_device *device; down_read(&idr_rwsem); device = idr_find(&fw_device_idr, MINOR(devt)); + if (device) + fw_device_get(device); up_read(&idr_rwsem); return device; @@ -627,13 +615,14 @@ static void fw_device_shutdown(struct work_struct *work) container_of(work, struct fw_device, work.work); int minor = MINOR(device->device.devt); - down_write(&idr_rwsem); - idr_remove(&fw_device_idr, minor); - up_write(&idr_rwsem); - fw_device_cdev_remove(device); device_for_each_child(&device->device, NULL, shutdown_unit); device_unregister(&device->device); + + down_write(&idr_rwsem); + idr_remove(&fw_device_idr, minor); + up_write(&idr_rwsem); + fw_device_put(device); } static struct device_type fw_device_type = { @@ -668,7 +657,8 @@ static void fw_device_init(struct work_struct *work) */ if (read_bus_info_block(device, device->generation) < 0) { - if (device->config_rom_retries < MAX_RETRIES) { + if (device->config_rom_retries < MAX_RETRIES && + atomic_read(&device->state) == FW_DEVICE_INITIALIZING) { device->config_rom_retries++; schedule_delayed_work(&device->work, RETRY_DELAY); } else { @@ -682,10 +672,13 @@ static void fw_device_init(struct work_struct *work) } err = -ENOMEM; + + fw_device_get(device); down_write(&idr_rwsem); if (idr_pre_get(&fw_device_idr, GFP_KERNEL)) err = idr_get_new(&fw_device_idr, device, &minor); up_write(&idr_rwsem); + if (err < 0) goto error; @@ -717,13 +710,22 @@ static void fw_device_init(struct work_struct *work) */ if (atomic_cmpxchg(&device->state, FW_DEVICE_INITIALIZING, - FW_DEVICE_RUNNING) == FW_DEVICE_SHUTDOWN) + FW_DEVICE_RUNNING) == FW_DEVICE_SHUTDOWN) { fw_device_shutdown(&device->work.work); - else - fw_notify("created new fw device %s " - "(%d config rom retries, S%d00)\n", - device->device.bus_id, device->config_rom_retries, - 1 << device->max_speed); + } else { + if (device->config_rom_retries) + fw_notify("created device %s: GUID %08x%08x, S%d00, " + "%d config ROM retries\n", + device->device.bus_id, + device->config_rom[3], device->config_rom[4], + 1 << device->max_speed, + device->config_rom_retries); + else + fw_notify("created device %s: GUID %08x%08x, S%d00\n", + device->device.bus_id, + device->config_rom[3], device->config_rom[4], + 1 << device->max_speed); + } /* * Reschedule the IRM work if we just finished reading the @@ -741,7 +743,9 @@ static void fw_device_init(struct work_struct *work) idr_remove(&fw_device_idr, minor); up_write(&idr_rwsem); error: - put_device(&device->device); + fw_device_put(device); /* fw_device_idr's reference */ + + put_device(&device->device); /* our reference */ } static int update_unit(struct device *dev, void *data) @@ -791,7 +795,8 @@ void fw_node_event(struct fw_card *card, struct fw_node *node, int event) */ device_initialize(&device->device); atomic_set(&device->state, FW_DEVICE_INITIALIZING); - device->card = fw_card_get(card); + atomic_inc(&card->device_count); + device->card = card; device->node = fw_node_get(node); device->node_id = node->node_id; device->generation = card->generation; diff --git a/drivers/firewire/fw-device.h b/drivers/firewire/fw-device.h index 0854fe2bc110..78ecd3991b7f 100644 --- a/drivers/firewire/fw-device.h +++ b/drivers/firewire/fw-device.h @@ -76,14 +76,26 @@ fw_device_is_shutdown(struct fw_device *device) return atomic_read(&device->state) == FW_DEVICE_SHUTDOWN; } -struct fw_device *fw_device_get(struct fw_device *device); -void fw_device_put(struct fw_device *device); +static inline struct fw_device * +fw_device_get(struct fw_device *device) +{ + get_device(&device->device); + + return device; +} + +static inline void +fw_device_put(struct fw_device *device) +{ + put_device(&device->device); +} + +struct fw_device *fw_device_get_by_devt(dev_t devt); int fw_device_enable_phys_dma(struct fw_device *device); void fw_device_cdev_update(struct fw_device *device); void fw_device_cdev_remove(struct fw_device *device); -struct fw_device *fw_device_from_devt(dev_t devt); extern int fw_cdev_major; struct fw_unit { diff --git a/drivers/firewire/fw-sbp2.c b/drivers/firewire/fw-sbp2.c index 19ece9b6d742..03069a454c07 100644 --- a/drivers/firewire/fw-sbp2.c +++ b/drivers/firewire/fw-sbp2.c @@ -28,14 +28,15 @@ * and many others. */ +#include <linux/blkdev.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/dma-mapping.h> #include <linux/kernel.h> +#include <linux/mod_devicetable.h> #include <linux/module.h> #include <linux/moduleparam.h> -#include <linux/mod_devicetable.h> -#include <linux/device.h> #include <linux/scatterlist.h> -#include <linux/dma-mapping.h> -#include <linux/blkdev.h> #include <linux/string.h> #include <linux/stringify.h> #include <linux/timer.h> @@ -47,9 +48,9 @@ #include <scsi/scsi_device.h> #include <scsi/scsi_host.h> -#include "fw-transaction.h" -#include "fw-topology.h" #include "fw-device.h" +#include "fw-topology.h" +#include "fw-transaction.h" /* * So far only bridges from Oxford Semiconductor are known to support @@ -82,6 +83,9 @@ MODULE_PARM_DESC(exclusive_login, "Exclusive login to sbp2 device " * Avoids access beyond actual disk limits on devices with an off-by-one bug. * Don't use this with devices which don't have this bug. * + * - delay inquiry + * Wait extra SBP2_INQUIRY_DELAY seconds after login before SCSI inquiry. + * * - override internal blacklist * Instead of adding to the built-in blacklist, use only the workarounds * specified in the module load parameter. @@ -91,6 +95,8 @@ MODULE_PARM_DESC(exclusive_login, "Exclusive login to sbp2 device " #define SBP2_WORKAROUND_INQUIRY_36 0x2 #define SBP2_WORKAROUND_MODE_SENSE_8 0x4 #define SBP2_WORKAROUND_FIX_CAPACITY 0x8 +#define SBP2_WORKAROUND_DELAY_INQUIRY 0x10 +#define SBP2_INQUIRY_DELAY 12 #define SBP2_WORKAROUND_OVERRIDE 0x100 static int sbp2_param_workarounds; @@ -100,6 +106,7 @@ MODULE_PARM_DESC(workarounds, "Work around device bugs (default = 0" ", 36 byte inquiry = " __stringify(SBP2_WORKAROUND_INQUIRY_36) ", skip mode page 8 = " __stringify(SBP2_WORKAROUND_MODE_SENSE_8) ", fix capacity = " __stringify(SBP2_WORKAROUND_FIX_CAPACITY) + ", delay inquiry = " __stringify(SBP2_WORKAROUND_DELAY_INQUIRY) ", override internal blacklist = " __stringify(SBP2_WORKAROUND_OVERRIDE) ", or a combination)"); @@ -115,7 +122,6 @@ static const char sbp2_driver_name[] = "sbp2"; struct sbp2_logical_unit { struct sbp2_target *tgt; struct list_head link; - struct scsi_device *sdev; struct fw_address_handler address_handler; struct list_head orb_list; @@ -132,6 +138,8 @@ struct sbp2_logical_unit { int generation; int retries; struct delayed_work work; + bool has_sdev; + bool blocked; }; /* @@ -141,16 +149,18 @@ struct sbp2_logical_unit { struct sbp2_target { struct kref kref; struct fw_unit *unit; + const char *bus_id; + struct list_head lu_list; u64 management_agent_address; int directory_id; int node_id; int address_high; - - unsigned workarounds; - struct list_head lu_list; - + unsigned int workarounds; unsigned int mgt_orb_timeout; + + int dont_block; /* counter for each logical unit */ + int blocked; /* ditto */ }; /* @@ -160,7 +170,7 @@ struct sbp2_target { */ #define SBP2_MIN_LOGIN_ORB_TIMEOUT 5000U /* Timeout in ms */ #define SBP2_MAX_LOGIN_ORB_TIMEOUT 40000U /* Timeout in ms */ -#define SBP2_ORB_TIMEOUT 2000 /* Timeout in ms */ +#define SBP2_ORB_TIMEOUT 2000U /* Timeout in ms */ #define SBP2_ORB_NULL 0x80000000 #define SBP2_MAX_SG_ELEMENT_LENGTH 0xf000 @@ -297,7 +307,7 @@ struct sbp2_command_orb { static const struct { u32 firmware_revision; u32 model; - unsigned workarounds; + unsigned int workarounds; } sbp2_workarounds_table[] = { /* DViCO Momobay CX-1 with TSB42AA9 bridge */ { .firmware_revision = 0x002800, @@ -305,6 +315,11 @@ static const struct { .workarounds = SBP2_WORKAROUND_INQUIRY_36 | SBP2_WORKAROUND_MODE_SENSE_8, }, + /* DViCO Momobay FX-3A with TSB42AA9A bridge */ { + .firmware_revision = 0x002800, + .model = 0x000000, + .workarounds = SBP2_WORKAROUND_DELAY_INQUIRY, + }, /* Initio bridges, actually only needed for some older ones */ { .firmware_revision = 0x000200, .model = ~0, @@ -501,6 +516,9 @@ sbp2_send_management_orb(struct sbp2_logical_unit *lu, int node_id, unsigned int timeout; int retval = -ENOMEM; + if (function == SBP2_LOGOUT_REQUEST && fw_device_is_shutdown(device)) + return 0; + orb = kzalloc(sizeof(*orb), GFP_ATOMIC); if (orb == NULL) return -ENOMEM; @@ -553,20 +571,20 @@ sbp2_send_management_orb(struct sbp2_logical_unit *lu, int node_id, retval = -EIO; if (sbp2_cancel_orbs(lu) == 0) { - fw_error("orb reply timed out, rcode=0x%02x\n", - orb->base.rcode); + fw_error("%s: orb reply timed out, rcode=0x%02x\n", + lu->tgt->bus_id, orb->base.rcode); goto out; } if (orb->base.rcode != RCODE_COMPLETE) { - fw_error("management write failed, rcode 0x%02x\n", - orb->base.rcode); + fw_error("%s: management write failed, rcode 0x%02x\n", + lu->tgt->bus_id, orb->base.rcode); goto out; } if (STATUS_GET_RESPONSE(orb->status) != 0 || STATUS_GET_SBP_STATUS(orb->status) != 0) { - fw_error("error status: %d:%d\n", + fw_error("%s: error status: %d:%d\n", lu->tgt->bus_id, STATUS_GET_RESPONSE(orb->status), STATUS_GET_SBP_STATUS(orb->status)); goto out; @@ -590,29 +608,158 @@ sbp2_send_management_orb(struct sbp2_logical_unit *lu, int node_id, static void complete_agent_reset_write(struct fw_card *card, int rcode, - void *payload, size_t length, void *data) + void *payload, size_t length, void *done) { - struct fw_transaction *t = data; + complete(done); +} - kfree(t); +static void sbp2_agent_reset(struct sbp2_logical_unit *lu) +{ + struct fw_device *device = fw_device(lu->tgt->unit->device.parent); + DECLARE_COMPLETION_ONSTACK(done); + struct fw_transaction t; + static u32 z; + + fw_send_request(device->card, &t, TCODE_WRITE_QUADLET_REQUEST, + lu->tgt->node_id, lu->generation, device->max_speed, + lu->command_block_agent_address + SBP2_AGENT_RESET, + &z, sizeof(z), complete_agent_reset_write, &done); + wait_for_completion(&done); +} + +static void +complete_agent_reset_write_no_wait(struct fw_card *card, int rcode, + void *payload, size_t length, void *data) +{ + kfree(data); } -static int sbp2_agent_reset(struct sbp2_logical_unit *lu) +static void sbp2_agent_reset_no_wait(struct sbp2_logical_unit *lu) { struct fw_device *device = fw_device(lu->tgt->unit->device.parent); struct fw_transaction *t; - static u32 zero; + static u32 z; - t = kzalloc(sizeof(*t), GFP_ATOMIC); + t = kmalloc(sizeof(*t), GFP_ATOMIC); if (t == NULL) - return -ENOMEM; + return; fw_send_request(device->card, t, TCODE_WRITE_QUADLET_REQUEST, lu->tgt->node_id, lu->generation, device->max_speed, lu->command_block_agent_address + SBP2_AGENT_RESET, - &zero, sizeof(zero), complete_agent_reset_write, t); + &z, sizeof(z), complete_agent_reset_write_no_wait, t); +} - return 0; +static void sbp2_set_generation(struct sbp2_logical_unit *lu, int generation) +{ + struct fw_card *card = fw_device(lu->tgt->unit->device.parent)->card; + unsigned long flags; + + /* serialize with comparisons of lu->generation and card->generation */ + spin_lock_irqsave(&card->lock, flags); + lu->generation = generation; + spin_unlock_irqrestore(&card->lock, flags); +} + +static inline void sbp2_allow_block(struct sbp2_logical_unit *lu) +{ + /* + * We may access dont_block without taking card->lock here: + * All callers of sbp2_allow_block() and all callers of sbp2_unblock() + * are currently serialized against each other. + * And a wrong result in sbp2_conditionally_block()'s access of + * dont_block is rather harmless, it simply misses its first chance. + */ + --lu->tgt->dont_block; +} + +/* + * Blocks lu->tgt if all of the following conditions are met: + * - Login, INQUIRY, and high-level SCSI setup of all of the target's + * logical units have been finished (indicated by dont_block == 0). + * - lu->generation is stale. + * + * Note, scsi_block_requests() must be called while holding card->lock, + * otherwise it might foil sbp2_[conditionally_]unblock()'s attempt to + * unblock the target. + */ +static void sbp2_conditionally_block(struct sbp2_logical_unit *lu) +{ + struct sbp2_target *tgt = lu->tgt; + struct fw_card *card = fw_device(tgt->unit->device.parent)->card; + struct Scsi_Host *shost = + container_of((void *)tgt, struct Scsi_Host, hostdata[0]); + unsigned long flags; + + spin_lock_irqsave(&card->lock, flags); + if (!tgt->dont_block && !lu->blocked && + lu->generation != card->generation) { + lu->blocked = true; + if (++tgt->blocked == 1) { + scsi_block_requests(shost); + fw_notify("blocked %s\n", lu->tgt->bus_id); + } + } + spin_unlock_irqrestore(&card->lock, flags); +} + +/* + * Unblocks lu->tgt as soon as all its logical units can be unblocked. + * Note, it is harmless to run scsi_unblock_requests() outside the + * card->lock protected section. On the other hand, running it inside + * the section might clash with shost->host_lock. + */ +static void sbp2_conditionally_unblock(struct sbp2_logical_unit *lu) +{ + struct sbp2_target *tgt = lu->tgt; + struct fw_card *card = fw_device(tgt->unit->device.parent)->card; + struct Scsi_Host *shost = + container_of((void *)tgt, struct Scsi_Host, hostdata[0]); + unsigned long flags; + bool unblock = false; + + spin_lock_irqsave(&card->lock, flags); + if (lu->blocked && lu->generation == card->generation) { + lu->blocked = false; + unblock = --tgt->blocked == 0; + } + spin_unlock_irqrestore(&card->lock, flags); + + if (unblock) { + scsi_unblock_requests(shost); + fw_notify("unblocked %s\n", lu->tgt->bus_id); + } +} + +/* + * Prevents future blocking of tgt and unblocks it. + * Note, it is harmless to run scsi_unblock_requests() outside the + * card->lock protected section. On the other hand, running it inside + * the section might clash with shost->host_lock. + */ +static void sbp2_unblock(struct sbp2_target *tgt) +{ + struct fw_card *card = fw_device(tgt->unit->device.parent)->card; + struct Scsi_Host *shost = + container_of((void *)tgt, struct Scsi_Host, hostdata[0]); + unsigned long flags; + + spin_lock_irqsave(&card->lock, flags); + ++tgt->dont_block; + spin_unlock_irqrestore(&card->lock, flags); + + scsi_unblock_requests(shost); +} + +static int sbp2_lun2int(u16 lun) +{ + struct scsi_lun eight_bytes_lun; + + memset(&eight_bytes_lun, 0, sizeof(eight_bytes_lun)); + eight_bytes_lun.scsi_lun[0] = (lun >> 8) & 0xff; + eight_bytes_lun.scsi_lun[1] = lun & 0xff; + + return scsilun_to_int(&eight_bytes_lun); } static void sbp2_release_target(struct kref *kref) @@ -621,26 +768,31 @@ static void sbp2_release_target(struct kref *kref) struct sbp2_logical_unit *lu, *next; struct Scsi_Host *shost = container_of((void *)tgt, struct Scsi_Host, hostdata[0]); + struct scsi_device *sdev; struct fw_device *device = fw_device(tgt->unit->device.parent); - list_for_each_entry_safe(lu, next, &tgt->lu_list, link) { - if (lu->sdev) - scsi_remove_device(lu->sdev); + /* prevent deadlocks */ + sbp2_unblock(tgt); - if (!fw_device_is_shutdown(device)) - sbp2_send_management_orb(lu, tgt->node_id, - lu->generation, SBP2_LOGOUT_REQUEST, - lu->login_id, NULL); + list_for_each_entry_safe(lu, next, &tgt->lu_list, link) { + sdev = scsi_device_lookup(shost, 0, 0, sbp2_lun2int(lu->lun)); + if (sdev) { + scsi_remove_device(sdev); + scsi_device_put(sdev); + } + sbp2_send_management_orb(lu, tgt->node_id, lu->generation, + SBP2_LOGOUT_REQUEST, lu->login_id, NULL); fw_core_remove_address_handler(&lu->address_handler); list_del(&lu->link); kfree(lu); } scsi_remove_host(shost); - fw_notify("released %s\n", tgt->unit->device.bus_id); + fw_notify("released %s\n", tgt->bus_id); put_device(&tgt->unit->device); scsi_host_put(shost); + fw_device_put(device); } static struct workqueue_struct *sbp2_wq; @@ -666,33 +818,42 @@ static void sbp2_login(struct work_struct *work) { struct sbp2_logical_unit *lu = container_of(work, struct sbp2_logical_unit, work.work); - struct Scsi_Host *shost = - container_of((void *)lu->tgt, struct Scsi_Host, hostdata[0]); + struct sbp2_target *tgt = lu->tgt; + struct fw_device *device = fw_device(tgt->unit->device.parent); + struct Scsi_Host *shost; struct scsi_device *sdev; - struct scsi_lun eight_bytes_lun; - struct fw_unit *unit = lu->tgt->unit; - struct fw_device *device = fw_device(unit->device.parent); struct sbp2_login_response response; int generation, node_id, local_node_id; + if (fw_device_is_shutdown(device)) + goto out; + generation = device->generation; smp_rmb(); /* node_id must not be older than generation */ node_id = device->node_id; local_node_id = device->card->node_id; + /* If this is a re-login attempt, log out, or we might be rejected. */ + if (lu->has_sdev) + sbp2_send_management_orb(lu, device->node_id, generation, + SBP2_LOGOUT_REQUEST, lu->login_id, NULL); + if (sbp2_send_management_orb(lu, node_id, generation, SBP2_LOGIN_REQUEST, lu->lun, &response) < 0) { - if (lu->retries++ < 5) + if (lu->retries++ < 5) { sbp2_queue_work(lu, DIV_ROUND_UP(HZ, 5)); - else - fw_error("failed to login to %s LUN %04x\n", - unit->device.bus_id, lu->lun); + } else { + fw_error("%s: failed to login to LUN %04x\n", + tgt->bus_id, lu->lun); + /* Let any waiting I/O fail from now on. */ + sbp2_unblock(lu->tgt); + } goto out; } - lu->generation = generation; - lu->tgt->node_id = node_id; - lu->tgt->address_high = local_node_id << 16; + tgt->node_id = node_id; + tgt->address_high = local_node_id << 16; + sbp2_set_generation(lu, generation); /* Get command block agent offset and login id. */ lu->command_block_agent_address = @@ -700,8 +861,8 @@ static void sbp2_login(struct work_struct *work) response.command_block_agent.low; lu->login_id = LOGIN_RESPONSE_GET_LOGIN_ID(response); - fw_notify("logged in to %s LUN %04x (%d retries)\n", - unit->device.bus_id, lu->lun, lu->retries); + fw_notify("%s: logged in to LUN %04x (%d retries)\n", + tgt->bus_id, lu->lun, lu->retries); #if 0 /* FIXME: The linux1394 sbp2 does this last step. */ @@ -711,26 +872,58 @@ static void sbp2_login(struct work_struct *work) PREPARE_DELAYED_WORK(&lu->work, sbp2_reconnect); sbp2_agent_reset(lu); - memset(&eight_bytes_lun, 0, sizeof(eight_bytes_lun)); - eight_bytes_lun.scsi_lun[0] = (lu->lun >> 8) & 0xff; - eight_bytes_lun.scsi_lun[1] = lu->lun & 0xff; + /* This was a re-login. */ + if (lu->has_sdev) { + sbp2_cancel_orbs(lu); + sbp2_conditionally_unblock(lu); + goto out; + } - sdev = __scsi_add_device(shost, 0, 0, - scsilun_to_int(&eight_bytes_lun), lu); - if (IS_ERR(sdev)) { - sbp2_send_management_orb(lu, node_id, generation, - SBP2_LOGOUT_REQUEST, lu->login_id, NULL); - /* - * Set this back to sbp2_login so we fall back and - * retry login on bus reset. - */ - PREPARE_DELAYED_WORK(&lu->work, sbp2_login); - } else { - lu->sdev = sdev; + if (lu->tgt->workarounds & SBP2_WORKAROUND_DELAY_INQUIRY) + ssleep(SBP2_INQUIRY_DELAY); + + shost = container_of((void *)tgt, struct Scsi_Host, hostdata[0]); + sdev = __scsi_add_device(shost, 0, 0, sbp2_lun2int(lu->lun), lu); + /* + * FIXME: We are unable to perform reconnects while in sbp2_login(). + * Therefore __scsi_add_device() will get into trouble if a bus reset + * happens in parallel. It will either fail or leave us with an + * unusable sdev. As a workaround we check for this and retry the + * whole login and SCSI probing. + */ + + /* Reported error during __scsi_add_device() */ + if (IS_ERR(sdev)) + goto out_logout_login; + + /* Unreported error during __scsi_add_device() */ + smp_rmb(); /* get current card generation */ + if (generation != device->card->generation) { + scsi_remove_device(sdev); scsi_device_put(sdev); + goto out_logout_login; } + + /* No error during __scsi_add_device() */ + lu->has_sdev = true; + scsi_device_put(sdev); + sbp2_allow_block(lu); + goto out; + + out_logout_login: + smp_rmb(); /* generation may have changed */ + generation = device->generation; + smp_rmb(); /* node_id must not be older than generation */ + + sbp2_send_management_orb(lu, device->node_id, generation, + SBP2_LOGOUT_REQUEST, lu->login_id, NULL); + /* + * If a bus reset happened, sbp2_update will have requeued + * lu->work already. Reset the work from reconnect to login. + */ + PREPARE_DELAYED_WORK(&lu->work, sbp2_login); out: - sbp2_target_put(lu->tgt); + sbp2_target_put(tgt); } static int sbp2_add_logical_unit(struct sbp2_target *tgt, int lun_entry) @@ -751,10 +944,12 @@ static int sbp2_add_logical_unit(struct sbp2_target *tgt, int lun_entry) return -ENOMEM; } - lu->tgt = tgt; - lu->sdev = NULL; - lu->lun = lun_entry & 0xffff; - lu->retries = 0; + lu->tgt = tgt; + lu->lun = lun_entry & 0xffff; + lu->retries = 0; + lu->has_sdev = false; + lu->blocked = false; + ++tgt->dont_block; INIT_LIST_HEAD(&lu->orb_list); INIT_DELAYED_WORK(&lu->work, sbp2_login); @@ -813,7 +1008,7 @@ static int sbp2_scan_unit_dir(struct sbp2_target *tgt, u32 *directory, if (timeout > tgt->mgt_orb_timeout) fw_notify("%s: config rom contains %ds " "management ORB timeout, limiting " - "to %ds\n", tgt->unit->device.bus_id, + "to %ds\n", tgt->bus_id, timeout / 1000, tgt->mgt_orb_timeout / 1000); break; @@ -836,12 +1031,12 @@ static void sbp2_init_workarounds(struct sbp2_target *tgt, u32 model, u32 firmware_revision) { int i; - unsigned w = sbp2_param_workarounds; + unsigned int w = sbp2_param_workarounds; if (w) fw_notify("Please notify linux1394-devel@lists.sourceforge.net " "if you need the workarounds parameter for %s\n", - tgt->unit->device.bus_id); + tgt->bus_id); if (w & SBP2_WORKAROUND_OVERRIDE) goto out; @@ -863,8 +1058,7 @@ static void sbp2_init_workarounds(struct sbp2_target *tgt, u32 model, if (w) fw_notify("Workarounds for %s: 0x%x " "(firmware_revision 0x%06x, model_id 0x%06x)\n", - tgt->unit->device.bus_id, - w, firmware_revision, model); + tgt->bus_id, w, firmware_revision, model); tgt->workarounds = w; } @@ -888,6 +1082,7 @@ static int sbp2_probe(struct device *dev) tgt->unit = unit; kref_init(&tgt->kref); INIT_LIST_HEAD(&tgt->lu_list); + tgt->bus_id = unit->device.bus_id; if (fw_device_enable_phys_dma(device) < 0) goto fail_shost_put; @@ -895,6 +1090,8 @@ static int sbp2_probe(struct device *dev) if (scsi_add_host(shost, &unit->device) < 0) goto fail_shost_put; + fw_device_get(device); + /* Initialize to values that won't match anything in our table. */ firmware_revision = 0xff000000; model = 0xff000000; @@ -938,10 +1135,13 @@ static void sbp2_reconnect(struct work_struct *work) { struct sbp2_logical_unit *lu = container_of(work, struct sbp2_logical_unit, work.work); - struct fw_unit *unit = lu->tgt->unit; - struct fw_device *device = fw_device(unit->device.parent); + struct sbp2_target *tgt = lu->tgt; + struct fw_device *device = fw_device(tgt->unit->device.parent); int generation, node_id, local_node_id; + if (fw_device_is_shutdown(device)) + goto out; + generation = device->generation; smp_rmb(); /* node_id must not be older than generation */ node_id = device->node_id; @@ -950,10 +1150,17 @@ static void sbp2_reconnect(struct work_struct *work) if (sbp2_send_management_orb(lu, node_id, generation, SBP2_RECONNECT_REQUEST, lu->login_id, NULL) < 0) { - if (lu->retries++ >= 5) { - fw_error("failed to reconnect to %s\n", - unit->device.bus_id); - /* Fall back and try to log in again. */ + /* + * If reconnect was impossible even though we are in the + * current generation, fall back and try to log in again. + * + * We could check for "Function rejected" status, but + * looking at the bus generation as simpler and more general. + */ + smp_rmb(); /* get current card generation */ + if (generation == device->card->generation || + lu->retries++ >= 5) { + fw_error("%s: failed to reconnect\n", tgt->bus_id); lu->retries = 0; PREPARE_DELAYED_WORK(&lu->work, sbp2_login); } @@ -961,17 +1168,18 @@ static void sbp2_reconnect(struct work_struct *work) goto out; } - lu->generation = generation; - lu->tgt->node_id = node_id; - lu->tgt->address_high = local_node_id << 16; + tgt->node_id = node_id; + tgt->address_high = local_node_id << 16; + sbp2_set_generation(lu, generation); - fw_notify("reconnected to %s LUN %04x (%d retries)\n", - unit->device.bus_id, lu->lun, lu->retries); + fw_notify("%s: reconnected to LUN %04x (%d retries)\n", + tgt->bus_id, lu->lun, lu->retries); sbp2_agent_reset(lu); sbp2_cancel_orbs(lu); + sbp2_conditionally_unblock(lu); out: - sbp2_target_put(lu->tgt); + sbp2_target_put(tgt); } static void sbp2_update(struct fw_unit *unit) @@ -986,6 +1194,7 @@ static void sbp2_update(struct fw_unit *unit) * Iteration over tgt->lu_list is therefore safe here. */ list_for_each_entry(lu, &tgt->lu_list, link) { + sbp2_conditionally_block(lu); lu->retries = 0; sbp2_queue_work(lu, 0); } @@ -1063,7 +1272,7 @@ complete_command_orb(struct sbp2_orb *base_orb, struct sbp2_status *status) if (status != NULL) { if (STATUS_GET_DEAD(*status)) - sbp2_agent_reset(orb->lu); + sbp2_agent_reset_no_wait(orb->lu); switch (STATUS_GET_RESPONSE(*status)) { case SBP2_STATUS_REQUEST_COMPLETE: @@ -1089,6 +1298,7 @@ complete_command_orb(struct sbp2_orb *base_orb, struct sbp2_status *status) * or when sending the write (less likely). */ result = DID_BUS_BUSY << 16; + sbp2_conditionally_block(orb->lu); } dma_unmap_single(device->card->device, orb->base.request_bus, @@ -1197,7 +1407,7 @@ static int sbp2_scsi_queuecommand(struct scsi_cmnd *cmd, scsi_done_fn_t done) struct sbp2_logical_unit *lu = cmd->device->hostdata; struct fw_device *device = fw_device(lu->tgt->unit->device.parent); struct sbp2_command_orb *orb; - unsigned max_payload; + unsigned int max_payload; int retval = SCSI_MLQUEUE_HOST_BUSY; /* @@ -1275,6 +1485,10 @@ static int sbp2_scsi_slave_alloc(struct scsi_device *sdev) { struct sbp2_logical_unit *lu = sdev->hostdata; + /* (Re-)Adding logical units via the SCSI stack is not supported. */ + if (!lu) + return -ENOSYS; + sdev->allow_restart = 1; /* @@ -1319,7 +1533,7 @@ static int sbp2_scsi_abort(struct scsi_cmnd *cmd) { struct sbp2_logical_unit *lu = cmd->device->hostdata; - fw_notify("sbp2_scsi_abort\n"); + fw_notify("%s: sbp2_scsi_abort\n", lu->tgt->bus_id); sbp2_agent_reset(lu); sbp2_cancel_orbs(lu); diff --git a/drivers/firewire/fw-topology.c b/drivers/firewire/fw-topology.c index 172c1867e9aa..e47bb040197a 100644 --- a/drivers/firewire/fw-topology.c +++ b/drivers/firewire/fw-topology.c @@ -383,6 +383,7 @@ void fw_destroy_nodes(struct fw_card *card) card->color++; if (card->local_node != NULL) for_each_fw_node(card, card->local_node, report_lost_node); + card->local_node = NULL; spin_unlock_irqrestore(&card->lock, flags); } diff --git a/drivers/firewire/fw-transaction.h b/drivers/firewire/fw-transaction.h index fa7967b57408..09cb72870454 100644 --- a/drivers/firewire/fw-transaction.h +++ b/drivers/firewire/fw-transaction.h @@ -26,6 +26,7 @@ #include <linux/fs.h> #include <linux/dma-mapping.h> #include <linux/firewire-constants.h> +#include <asm/atomic.h> #define TCODE_IS_READ_REQUEST(tcode) (((tcode) & ~1) == 4) #define TCODE_IS_BLOCK_PACKET(tcode) (((tcode) & 1) != 0) @@ -219,6 +220,7 @@ extern struct bus_type fw_bus_type; struct fw_card { const struct fw_card_driver *driver; struct device *device; + atomic_t device_count; struct kref kref; int node_id; diff --git a/drivers/gpio/pca953x.c b/drivers/gpio/pca953x.c index 92583cd4bffd..6e72fd31184d 100644 --- a/drivers/gpio/pca953x.c +++ b/drivers/gpio/pca953x.c @@ -184,6 +184,7 @@ static void pca953x_setup_gpio(struct pca953x_chip *chip, int gpios) gc->direction_output = pca953x_gpio_direction_output; gc->get = pca953x_gpio_get_value; gc->set = pca953x_gpio_set_value; + gc->can_sleep = 1; gc->base = chip->gpio_start; gc->ngpio = gpios; diff --git a/drivers/i2c/busses/i2c-amd756.c b/drivers/i2c/busses/i2c-amd756.c index 573abe440842..2fa43183d375 100644 --- a/drivers/i2c/busses/i2c-amd756.c +++ b/drivers/i2c/busses/i2c-amd756.c @@ -335,7 +335,7 @@ static int __devinit amd756_probe(struct pci_dev *pdev, u8 temp; /* driver_data might come from user-space, so check it */ - if (id->driver_data > ARRAY_SIZE(chipname)) + if (id->driver_data >= ARRAY_SIZE(chipname)) return -EINVAL; if (amd756_ioport) { diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile index 501f00cea782..e47aca0ca5ae 100644 --- a/drivers/i2c/chips/Makefile +++ b/drivers/i2c/chips/Makefile @@ -1,6 +1,13 @@ # # Makefile for miscellaneous I2C chip drivers. # +# Think twice before you add a new driver to this directory. +# Device drivers are better grouped according to the functionality they +# implement rather than to the bus they are connected to. In particular: +# * Hardware monitoring chip drivers go to drivers/hwmon +# * RTC chip drivers go to drivers/rtc +# * I/O expander drivers go to drivers/gpio +# obj-$(CONFIG_DS1682) += ds1682.o obj-$(CONFIG_SENSORS_EEPROM) += eeprom.o diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index 96da22e9a5a4..fd84b2a36338 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -90,12 +90,16 @@ static int i2c_device_probe(struct device *dev) { struct i2c_client *client = to_i2c_client(dev); struct i2c_driver *driver = to_i2c_driver(dev->driver); + int status; if (!driver->probe) return -ENODEV; client->driver = driver; dev_dbg(dev, "probe\n"); - return driver->probe(client); + status = driver->probe(client); + if (status) + client->driver = NULL; + return status; } static int i2c_device_remove(struct device *dev) diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index df752e690e47..eed6d8e1b5c7 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -50,7 +50,7 @@ menuconfig IDE To compile this driver as a module, choose M here: the module will be called ide. - For further information, please read <file:Documentation/ide.txt>. + For further information, please read <file:Documentation/ide/ide.txt>. If unsure, say Y. @@ -77,7 +77,7 @@ config BLK_DEV_IDE Useful information about large (>540 MB) IDE disks, multiple interfaces, what to do if ATA/IDE devices are not automatically detected, sound card ATA/IDE ports, module support, and other - topics, is contained in <file:Documentation/ide.txt>. For detailed + topics, is contained in <file:Documentation/ide/ide.txt>. For detailed information about hard drives, consult the Disk-HOWTO and the Multi-Disk-HOWTO, available from <http://www.tldp.org/docs.html#howto>. @@ -87,7 +87,7 @@ config BLK_DEV_IDE <ftp://ibiblio.org/pub/Linux/system/hardware/>. To compile this driver as a module, choose M here and read - <file:Documentation/ide.txt>. The module will be called ide-mod. + <file:Documentation/ide/ide.txt>. The module will be called ide-mod. Do not compile this driver as a module if your root file system (the one containing the directory /) is located on an IDE device. @@ -98,7 +98,7 @@ config BLK_DEV_IDE if BLK_DEV_IDE -comment "Please see Documentation/ide.txt for help/info on IDE drives" +comment "Please see Documentation/ide/ide.txt for help/info on IDE drives" config BLK_DEV_IDE_SATA bool "Support for SATA (deprecated; conflicts with libata SATA driver)" @@ -235,8 +235,8 @@ config BLK_DEV_IDETAPE along with other IDE devices, as "hdb" or "hdc", or something similar, and will be mapped to a character device such as "ht0" (check the boot messages with dmesg). Be sure to consult the - <file:drivers/ide/ide-tape.c> and <file:Documentation/ide.txt> files - for usage information. + <file:drivers/ide/ide-tape.c> and <file:Documentation/ide/ide.txt> + files for usage information. To compile this driver as a module, choose M here: the module will be called ide-tape. @@ -358,7 +358,7 @@ config BLK_DEV_CMD640 The CMD640 chip is also used on add-in cards by Acculogic, and on the "CSA-6400E PCI to IDE controller" that some people have. For - details, read <file:Documentation/ide.txt>. + details, read <file:Documentation/ide/ide.txt>. config BLK_DEV_CMD640_ENHANCED bool "CMD640 enhanced support" @@ -366,7 +366,7 @@ config BLK_DEV_CMD640_ENHANCED help This option includes support for setting/autotuning PIO modes and prefetch on CMD640 IDE interfaces. For details, read - <file:Documentation/ide.txt>. If you have a CMD640 IDE interface + <file:Documentation/ide/ide.txt>. If you have a CMD640 IDE interface and your BIOS does not already do this for you, then say Y here. Otherwise say N. @@ -1069,9 +1069,9 @@ config BLK_DEV_ALI14XX This driver is enabled at runtime using the "ali14xx.probe" kernel boot parameter. It enables support for the secondary IDE interface of the ALI M1439/1443/1445/1487/1489 chipsets, and permits faster - I/O speeds to be set as well. See the files - <file:Documentation/ide.txt> and <file:drivers/ide/legacy/ali14xx.c> - for more info. + I/O speeds to be set as well. + See the files <file:Documentation/ide/ide.txt> and + <file:drivers/ide/legacy/ali14xx.c> for more info. config BLK_DEV_DTC2278 tristate "DTC-2278 support" @@ -1079,7 +1079,7 @@ config BLK_DEV_DTC2278 This driver is enabled at runtime using the "dtc2278.probe" kernel boot parameter. It enables support for the secondary IDE interface of the DTC-2278 card, and permits faster I/O speeds to be set as - well. See the <file:Documentation/ide.txt> and + well. See the <file:Documentation/ide/ide.txt> and <file:drivers/ide/legacy/dtc2278.c> files for more info. config BLK_DEV_HT6560B @@ -1088,7 +1088,7 @@ config BLK_DEV_HT6560B This driver is enabled at runtime using the "ht6560b.probe" kernel boot parameter. It enables support for the secondary IDE interface of the Holtek card, and permits faster I/O speeds to be set as well. - See the <file:Documentation/ide.txt> and + See the <file:Documentation/ide/ide.txt> and <file:drivers/ide/legacy/ht6560b.c> files for more info. config BLK_DEV_QD65XX @@ -1096,7 +1096,7 @@ config BLK_DEV_QD65XX help This driver is enabled at runtime using the "qd65xx.probe" kernel boot parameter. It permits faster I/O speeds to be set. See the - <file:Documentation/ide.txt> and <file:drivers/ide/legacy/qd65xx.c> + <file:Documentation/ide/ide.txt> and <file:drivers/ide/legacy/qd65xx.c> for more info. config BLK_DEV_UMC8672 @@ -1105,7 +1105,7 @@ config BLK_DEV_UMC8672 This driver is enabled at runtime using the "umc8672.probe" kernel boot parameter. It enables support for the secondary IDE interface of the UMC-8672, and permits faster I/O speeds to be set as well. - See the files <file:Documentation/ide.txt> and + See the files <file:Documentation/ide/ide.txt> and <file:drivers/ide/legacy/umc8672.c> for more info. endif diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 310e497b5838..c8d0e8715997 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -670,8 +670,8 @@ static void cdrom_buffer_sectors (ide_drive_t *drive, unsigned long sector, * and attempt to recover if there are problems. Returns 0 if everything's * ok; nonzero if the request has been terminated. */ -static -int ide_cd_check_ireason(ide_drive_t *drive, int len, int ireason, int rw) +static int ide_cd_check_ireason(ide_drive_t *drive, struct request *rq, + int len, int ireason, int rw) { /* * ireason == 0: the drive wants to receive data from us @@ -701,6 +701,9 @@ int ide_cd_check_ireason(ide_drive_t *drive, int len, int ireason, int rw) drive->name, __FUNCTION__, ireason); } + if (rq->cmd_type == REQ_TYPE_ATA_PC) + rq->cmd_flags |= REQ_FAILED; + cdrom_end_request(drive, 0); return -1; } @@ -1071,11 +1074,11 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive) /* * check which way to transfer data */ - if (blk_fs_request(rq) || blk_pc_request(rq)) { - if (ide_cd_check_ireason(drive, len, ireason, write)) - return ide_stopped; + if (ide_cd_check_ireason(drive, rq, len, ireason, write)) + return ide_stopped; - if (blk_fs_request(rq) && write == 0) { + if (blk_fs_request(rq)) { + if (write == 0) { int nskip; if (ide_cd_check_transfer_size(drive, len)) { @@ -1101,16 +1104,9 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive) if (ireason == 0) { write = 1; xferfunc = HWIF(drive)->atapi_output_bytes; - } else if (ireason == 2 || (ireason == 1 && - (blk_fs_request(rq) || blk_pc_request(rq)))) { + } else { write = 0; xferfunc = HWIF(drive)->atapi_input_bytes; - } else { - printk(KERN_ERR "%s: %s: The drive " - "appears confused (ireason = 0x%02x). " - "Trying to recover by ending request.\n", - drive->name, __FUNCTION__, ireason); - goto end_request; } /* @@ -1182,11 +1178,10 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive) else rq->data += blen; } + if (!write && blk_sense_request(rq)) + rq->sense_len += blen; } - if (write && blk_sense_request(rq)) - rq->sense_len += thislen; - /* * pad, if necessary */ @@ -1931,6 +1926,7 @@ static const struct cd_list_entry ide_cd_quirks_list[] = { { "MATSHITADVD-ROM SR-8186", NULL, IDE_CD_FLAG_PLAY_AUDIO_OK }, { "MATSHITADVD-ROM SR-8176", NULL, IDE_CD_FLAG_PLAY_AUDIO_OK }, { "MATSHITADVD-ROM SR-8174", NULL, IDE_CD_FLAG_PLAY_AUDIO_OK }, + { "Optiarc DVD RW AD-5200A", NULL, IDE_CD_FLAG_PLAY_AUDIO_OK }, { NULL, NULL, 0 } }; diff --git a/drivers/ide/ide-cd_ioctl.c b/drivers/ide/ide-cd_ioctl.c index b68284de4e85..6d147ce6782f 100644 --- a/drivers/ide/ide-cd_ioctl.c +++ b/drivers/ide/ide-cd_ioctl.c @@ -457,6 +457,10 @@ int ide_cdrom_packet(struct cdrom_device_info *cdi, layer. the packet must be complete, as we do not touch it at all. */ ide_cd_init_rq(drive, &req); + + if (cgc->data_direction == CGC_DATA_WRITE) + req.cmd_flags |= REQ_RW; + memcpy(req.cmd, cgc->cmd, CDROM_PACKET_SIZE); if (cgc->sense) memset(cgc->sense, 0, sizeof(struct request_sense)); diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c index 8f5bed471050..39501d130256 100644 --- a/drivers/ide/ide-disk.c +++ b/drivers/ide/ide-disk.c @@ -867,7 +867,7 @@ static void idedisk_setup (ide_drive_t *drive) /* Only print cache size when it was specified */ if (id->buf_size) - printk (" w/%dKiB Cache", id->buf_size/2); + printk(KERN_CONT " w/%dKiB Cache", id->buf_size / 2); printk(KERN_CONT ", CHS=%d/%d/%d\n", drive->bios_cyl, drive->bios_head, drive->bios_sect); @@ -949,7 +949,8 @@ static void ide_device_shutdown(ide_drive_t *drive) return; } - printk("Shutdown: %s\n", drive->name); + printk(KERN_INFO "Shutdown: %s\n", drive->name); + drive->gendev.bus->suspend(&drive->gendev, PMSG_SUSPEND); } diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c index d0e7b537353e..d61e5788d310 100644 --- a/drivers/ide/ide-dma.c +++ b/drivers/ide/ide-dma.c @@ -1,9 +1,13 @@ /* + * IDE DMA support (including IDE PCI BM-DMA). + * * Copyright (C) 1995-1998 Mark Lord * Copyright (C) 1999-2000 Andre Hedrick <andre@linux-ide.org> * Copyright (C) 2004, 2007 Bartlomiej Zolnierkiewicz * * May be copied or modified under the terms of the GNU General Public License + * + * DMA is supported for all IDE devices (disk drives, cdroms, tapes, floppies). */ /* @@ -11,49 +15,6 @@ */ /* - * This module provides support for the bus-master IDE DMA functions - * of various PCI chipsets, including the Intel PIIX (i82371FB for - * the 430 FX chipset), the PIIX3 (i82371SB for the 430 HX/VX and - * 440 chipsets), and the PIIX4 (i82371AB for the 430 TX chipset) - * ("PIIX" stands for "PCI ISA IDE Xcellerator"). - * - * Pretty much the same code works for other IDE PCI bus-mastering chipsets. - * - * DMA is supported for all IDE devices (disk drives, cdroms, tapes, floppies). - * - * By default, DMA support is prepared for use, but is currently enabled only - * for drives which already have DMA enabled (UltraDMA or mode 2 multi/single), - * or which are recognized as "good" (see table below). Drives with only mode0 - * or mode1 (multi/single) DMA should also work with this chipset/driver - * (eg. MC2112A) but are not enabled by default. - * - * Use "hdparm -i" to view modes supported by a given drive. - * - * The hdparm-3.5 (or later) utility can be used for manually enabling/disabling - * DMA support, but must be (re-)compiled against this kernel version or later. - * - * To enable DMA, use "hdparm -d1 /dev/hd?" on a per-drive basis after booting. - * If problems arise, ide.c will disable DMA operation after a few retries. - * This error recovery mechanism works and has been extremely well exercised. - * - * IDE drives, depending on their vintage, may support several different modes - * of DMA operation. The boot-time modes are indicated with a "*" in - * the "hdparm -i" listing, and can be changed with *knowledgeable* use of - * the "hdparm -X" feature. There is seldom a need to do this, as drives - * normally power-up with their "best" PIO/DMA modes enabled. - * - * Testing has been done with a rather extensive number of drives, - * with Quantum & Western Digital models generally outperforming the pack, - * and Fujitsu & Conner (and some Seagate which are really Conner) drives - * showing more lackluster throughput. - * - * Keep an eye on /var/adm/messages for "DMA disabled" messages. - * - * Some people have reported trouble with Intel Zappa motherboards. - * This can be fixed by upgrading the AMI BIOS to version 1.00.04.BS0, - * available from ftp://ftp.intel.com/pub/bios/10004bs0.exe - * (thanks to Glen Morrell <glen@spin.Stanford.edu> for researching this). - * * Thanks to "Christopher J. Reimer" <reimer@doe.carleton.ca> for * fixing the problem with the BIOS on some Acer motherboards. * @@ -65,11 +26,6 @@ * * Most importantly, thanks to Robert Bringman <rob@mars.trion.com> * for supplying a Promise UDMA board & WD UDMA drive for this work! - * - * And, yes, Intel Zappa boards really *do* use both PIIX IDE ports. - * - * ATA-66/100 and recovery functions, I forgot the rest...... - * */ #include <linux/module.h> @@ -757,7 +713,7 @@ static int ide_tune_dma(ide_drive_t *drive) } if (hwif->host_flags & IDE_HFLAG_NO_SET_MODE) - return 0; + return 1; if (ide_set_dma_mode(drive, speed)) return 0; diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index 4a2cb2868226..194ecb0049eb 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -756,7 +756,8 @@ static int ide_probe_port(ide_hwif_t *hwif) BUG_ON(hwif->present); - if (hwif->noprobe) + if (hwif->noprobe || + (hwif->drives[0].noprobe && hwif->drives[1].noprobe)) return -EACCES; /* diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 0598ecfd5f37..43e0e0557776 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -3765,6 +3765,11 @@ static int ide_tape_probe(ide_drive_t *drive) g->fops = &idetape_block_ops; ide_register_region(g); + printk(KERN_WARNING "It is possible that this driver does not have any" + " users anymore and, as a result, it will be REMOVED soon." + " Please notify Bart <bzolnier@gmail.com> or Boris" + " <petkovbb@gmail.com> in case you still need it.\n"); + return 0; out_free_tape: diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c index 477833f0daf5..9976f9d627d4 100644 --- a/drivers/ide/ide.c +++ b/drivers/ide/ide.c @@ -590,11 +590,6 @@ void ide_unregister(unsigned int index, int init_default, int restore) hwif->extra_ports = 0; } - /* - * Note that we only release the standard ports, - * and do not even try to handle any extra ports - * allocated for weird IDE interface chipsets. - */ ide_hwif_release_regions(hwif); /* copy original settings */ @@ -672,7 +667,6 @@ int ide_register_hw(hw_regs_t *hw, void (*quirkproc)(ide_drive_t *), do { hwif = ide_deprecated_find_port(hw->io_ports[IDE_DATA_OFFSET]); - index = hwif->index; if (hwif) goto found; for (index = 0; index < MAX_HWIFS; index++) @@ -680,6 +674,7 @@ int ide_register_hw(hw_regs_t *hw, void (*quirkproc)(ide_drive_t *), } while (retry--); return -1; found: + index = hwif->index; if (hwif->present) ide_unregister(index, 0, 1); else if (!hwif->hold) @@ -1036,10 +1031,9 @@ int generic_ide_ioctl(ide_drive_t *drive, struct file *file, struct block_device drive->nice1 = (arg >> IDE_NICE_1) & 1; return 0; case HDIO_DRIVE_RESET: - { - unsigned long flags; - if (!capable(CAP_SYS_ADMIN)) return -EACCES; - + if (!capable(CAP_SYS_ADMIN)) + return -EACCES; + /* * Abort the current command on the * group if there is one, taking @@ -1058,17 +1052,15 @@ int generic_ide_ioctl(ide_drive_t *drive, struct file *file, struct block_device ide_abort(drive, "drive reset"); BUG_ON(HWGROUP(drive)->handler); - + /* Ensure nothing gets queued after we drop the lock. Reset will clear the busy */ - + HWGROUP(drive)->busy = 1; spin_unlock_irqrestore(&ide_lock, flags); (void) ide_do_reset(drive); return 0; - } - case HDIO_GET_BUSSTATE: if (!capable(CAP_SYS_ADMIN)) return -EACCES; @@ -1188,7 +1180,7 @@ static int __initdata is_chipset_set[MAX_HWIFS]; * ide_setup() gets called VERY EARLY during initialization, * to handle kernel "command line" strings beginning with "hdx=" or "ide". * - * Remember to update Documentation/ide.txt if you change something here. + * Remember to update Documentation/ide/ide.txt if you change something here. */ static int __init ide_setup(char *s) { @@ -1449,7 +1441,7 @@ static int __init ide_setup(char *s) case -1: /* "noprobe" */ hwif->noprobe = 1; - goto done; + goto obsolete_option; case 1: /* base */ vals[1] = vals[0] + 0x206; /* default ctl */ diff --git a/drivers/ide/legacy/qd65xx.c b/drivers/ide/legacy/qd65xx.c index bba29df5f21d..2f4f47ad602f 100644 --- a/drivers/ide/legacy/qd65xx.c +++ b/drivers/ide/legacy/qd65xx.c @@ -334,43 +334,6 @@ static void __init qd6580_port_init_devs(ide_hwif_t *hwif) hwif->drives[1].drive_data = t2; } -/* - * qd_unsetup: - * - * called to unsetup an ata channel : back to default values, unlinks tuning - */ -/* -static void __exit qd_unsetup(ide_hwif_t *hwif) -{ - u8 config = hwif->config_data; - int base = hwif->select_data; - void *set_pio_mode = (void *)hwif->set_pio_mode; - - if (hwif->chipset != ide_qd65xx) - return; - - printk(KERN_NOTICE "%s: back to defaults\n", hwif->name); - - hwif->selectproc = NULL; - hwif->set_pio_mode = NULL; - - if (set_pio_mode == (void *)qd6500_set_pio_mode) { - // will do it for both - outb(QD6500_DEF_DATA, QD_TIMREG(&hwif->drives[0])); - } else if (set_pio_mode == (void *)qd6580_set_pio_mode) { - if (QD_CONTROL(hwif) & QD_CONTR_SEC_DISABLED) { - outb(QD6580_DEF_DATA, QD_TIMREG(&hwif->drives[0])); - outb(QD6580_DEF_DATA2, QD_TIMREG(&hwif->drives[1])); - } else { - outb(hwif->channel ? QD6580_DEF_DATA2 : QD6580_DEF_DATA, QD_TIMREG(&hwif->drives[0])); - } - } else { - printk(KERN_WARNING "Unknown qd65xx tuning fonction !\n"); - printk(KERN_WARNING "keeping settings !\n"); - } -} -*/ - static const struct ide_port_info qd65xx_port_info __initdata = { .chipset = ide_qd65xx, .host_flags = IDE_HFLAG_IO_32BIT | @@ -444,6 +407,8 @@ static int __init qd_probe(int base) printk(KERN_DEBUG "qd6580: config=%#x, control=%#x, ID3=%u\n", config, control, QD_ID3); + outb(QD_DEF_CONTR, QD_CONTROL_PORT); + if (control & QD_CONTR_SEC_DISABLED) { /* secondary disabled */ @@ -460,8 +425,6 @@ static int __init qd_probe(int base) ide_device_add(idx, &qd65xx_port_info); - outb(QD_DEF_CONTR, QD_CONTROL_PORT); - return 1; } else { ide_hwif_t *mate; @@ -487,8 +450,6 @@ static int __init qd_probe(int base) ide_device_add(idx, &qd65xx_port_info); - outb(QD_DEF_CONTR, QD_CONTROL_PORT); - return 0; /* no other qd65xx possible */ } } diff --git a/drivers/ide/pci/cmd640.c b/drivers/ide/pci/cmd640.c index bd24dad3cfc6..ec667982809c 100644 --- a/drivers/ide/pci/cmd640.c +++ b/drivers/ide/pci/cmd640.c @@ -787,7 +787,8 @@ static int __init cmd640x_init(void) /* * Try to enable the secondary interface, if not already enabled */ - if (cmd_hwif1->noprobe) { + if (cmd_hwif1->noprobe || + (cmd_hwif1->drives[0].noprobe && cmd_hwif1->drives[1].noprobe)) { port2 = "not probed"; } else { b = get_cmd640_reg(CNTRL); diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c index d0f7bb8b8adf..6357bb6269ab 100644 --- a/drivers/ide/pci/hpt366.c +++ b/drivers/ide/pci/hpt366.c @@ -1570,10 +1570,12 @@ static int __devinit hpt366_init_one(struct pci_dev *dev, const struct pci_devic if (rev < 3) info = &hpt36x; else { - static const struct hpt_info *hpt37x_info[] = - { &hpt370, &hpt370a, &hpt372, &hpt372n }; - - info = hpt37x_info[min_t(u8, rev, 6) - 3]; + switch (min_t(u8, rev, 6)) { + case 3: info = &hpt370; break; + case 4: info = &hpt370a; break; + case 5: info = &hpt372; break; + case 6: info = &hpt372n; break; + } idx++; } break; @@ -1626,7 +1628,7 @@ static int __devinit hpt366_init_one(struct pci_dev *dev, const struct pci_devic return ide_setup_pci_device(dev, &d); } -static const struct pci_device_id hpt366_pci_tbl[] = { +static const struct pci_device_id hpt366_pci_tbl[] __devinitconst = { { PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT366), 0 }, { PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT372), 1 }, { PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT302), 2 }, diff --git a/drivers/ieee1394/sbp2.c b/drivers/ieee1394/sbp2.c index 28e155a9e2a5..9e2b1964d71a 100644 --- a/drivers/ieee1394/sbp2.c +++ b/drivers/ieee1394/sbp2.c @@ -183,6 +183,9 @@ MODULE_PARM_DESC(exclusive_login, "Exclusive login to sbp2 device " * Avoids access beyond actual disk limits on devices with an off-by-one bug. * Don't use this with devices which don't have this bug. * + * - delay inquiry + * Wait extra SBP2_INQUIRY_DELAY seconds after login before SCSI inquiry. + * * - override internal blacklist * Instead of adding to the built-in blacklist, use only the workarounds * specified in the module load parameter. @@ -195,6 +198,7 @@ MODULE_PARM_DESC(workarounds, "Work around device bugs (default = 0" ", 36 byte inquiry = " __stringify(SBP2_WORKAROUND_INQUIRY_36) ", skip mode page 8 = " __stringify(SBP2_WORKAROUND_MODE_SENSE_8) ", fix capacity = " __stringify(SBP2_WORKAROUND_FIX_CAPACITY) + ", delay inquiry = " __stringify(SBP2_WORKAROUND_DELAY_INQUIRY) ", override internal blacklist = " __stringify(SBP2_WORKAROUND_OVERRIDE) ", or a combination)"); @@ -357,6 +361,11 @@ static const struct { .workarounds = SBP2_WORKAROUND_INQUIRY_36 | SBP2_WORKAROUND_MODE_SENSE_8, }, + /* DViCO Momobay FX-3A with TSB42AA9A bridge */ { + .firmware_revision = 0x002800, + .model_id = 0x000000, + .workarounds = SBP2_WORKAROUND_DELAY_INQUIRY, + }, /* Initio bridges, actually only needed for some older ones */ { .firmware_revision = 0x000200, .model_id = SBP2_ROM_VALUE_WILDCARD, @@ -914,6 +923,9 @@ static int sbp2_start_device(struct sbp2_lu *lu) sbp2_agent_reset(lu, 1); sbp2_max_speed_and_size(lu); + if (lu->workarounds & SBP2_WORKAROUND_DELAY_INQUIRY) + ssleep(SBP2_INQUIRY_DELAY); + error = scsi_add_device(lu->shost, 0, lu->ud->id, 0); if (error) { SBP2_ERR("scsi_add_device failed"); @@ -1962,6 +1974,9 @@ static int sbp2scsi_slave_alloc(struct scsi_device *sdev) { struct sbp2_lu *lu = (struct sbp2_lu *)sdev->host->hostdata[0]; + if (sdev->lun != 0 || sdev->id != lu->ud->id || sdev->channel != 0) + return -ENODEV; + lu->sdev = sdev; sdev->allow_restart = 1; diff --git a/drivers/ieee1394/sbp2.h b/drivers/ieee1394/sbp2.h index d2ecb0d8a1bb..80d8e097b065 100644 --- a/drivers/ieee1394/sbp2.h +++ b/drivers/ieee1394/sbp2.h @@ -343,6 +343,8 @@ enum sbp2lu_state_types { #define SBP2_WORKAROUND_INQUIRY_36 0x2 #define SBP2_WORKAROUND_MODE_SENSE_8 0x4 #define SBP2_WORKAROUND_FIX_CAPACITY 0x8 +#define SBP2_WORKAROUND_DELAY_INQUIRY 0x10 +#define SBP2_INQUIRY_DELAY 12 #define SBP2_WORKAROUND_OVERRIDE 0x100 #endif /* SBP2_H */ diff --git a/drivers/infiniband/core/cm.c b/drivers/infiniband/core/cm.c index b10ade92efed..4df405157086 100644 --- a/drivers/infiniband/core/cm.c +++ b/drivers/infiniband/core/cm.c @@ -3759,6 +3759,7 @@ static void cm_remove_one(struct ib_device *device) port = cm_dev->port[i-1]; ib_modify_port(device, port->port_num, 0, &port_modify); ib_unregister_mad_agent(port->mad_agent); + flush_workqueue(cm.wq); cm_remove_port_fs(port); } kobject_put(&cm_dev->dev_obj); @@ -3813,6 +3814,7 @@ static void __exit ib_cm_cleanup(void) cancel_delayed_work(&timewait_info->work.work); spin_unlock_irq(&cm.lock); + ib_unregister_client(&cm_client); destroy_workqueue(cm.wq); list_for_each_entry_safe(timewait_info, tmp, &cm.timewait_list, list) { @@ -3820,7 +3822,6 @@ static void __exit ib_cm_cleanup(void) kfree(timewait_info); } - ib_unregister_client(&cm_client); class_unregister(&cm_class); idr_destroy(&cm.local_id_table); } diff --git a/drivers/infiniband/core/fmr_pool.c b/drivers/infiniband/core/fmr_pool.c index 7f00347364f7..06d502c06a4d 100644 --- a/drivers/infiniband/core/fmr_pool.c +++ b/drivers/infiniband/core/fmr_pool.c @@ -139,7 +139,7 @@ static inline struct ib_pool_fmr *ib_fmr_cache_lookup(struct ib_fmr_pool *pool, static void ib_fmr_batch_release(struct ib_fmr_pool *pool) { int ret; - struct ib_pool_fmr *fmr, *next; + struct ib_pool_fmr *fmr; LIST_HEAD(unmap_list); LIST_HEAD(fmr_list); @@ -158,20 +158,6 @@ static void ib_fmr_batch_release(struct ib_fmr_pool *pool) #endif } - /* - * The free_list may hold FMRs that have been put there - * because they haven't reached the max_remap count. - * Invalidate their mapping as well. - */ - list_for_each_entry_safe(fmr, next, &pool->free_list, list) { - if (fmr->remap_count == 0) - continue; - hlist_del_init(&fmr->cache_node); - fmr->remap_count = 0; - list_add_tail(&fmr->fmr->list, &fmr_list); - list_move(&fmr->list, &unmap_list); - } - list_splice(&pool->dirty_list, &unmap_list); INIT_LIST_HEAD(&pool->dirty_list); pool->dirty_len = 0; @@ -384,6 +370,11 @@ void ib_destroy_fmr_pool(struct ib_fmr_pool *pool) i = 0; list_for_each_entry_safe(fmr, tmp, &pool->free_list, list) { + if (fmr->remap_count) { + INIT_LIST_HEAD(&fmr_list); + list_add_tail(&fmr->fmr->list, &fmr_list); + ib_unmap_fmr(&fmr_list); + } ib_dealloc_fmr(fmr->fmr); list_del(&fmr->list); kfree(fmr); @@ -407,8 +398,23 @@ EXPORT_SYMBOL(ib_destroy_fmr_pool); */ int ib_flush_fmr_pool(struct ib_fmr_pool *pool) { - int serial = atomic_inc_return(&pool->req_ser); + int serial; + struct ib_pool_fmr *fmr, *next; + + /* + * The free_list holds FMRs that may have been used + * but have not been remapped enough times to be dirty. + * Put them on the dirty list now so that the cleanup + * thread will reap them too. + */ + spin_lock_irq(&pool->pool_lock); + list_for_each_entry_safe(fmr, next, &pool->free_list, list) { + if (fmr->remap_count > 0) + list_move(&fmr->list, &pool->dirty_list); + } + spin_unlock_irq(&pool->pool_lock); + serial = atomic_inc_return(&pool->req_ser); wake_up_process(pool->thread); if (wait_event_interruptible(pool->force_wait, diff --git a/drivers/infiniband/core/iwcm.c b/drivers/infiniband/core/iwcm.c index 223b1aa7d92b..81c9195b512a 100644 --- a/drivers/infiniband/core/iwcm.c +++ b/drivers/infiniband/core/iwcm.c @@ -839,6 +839,7 @@ static void cm_work_handler(struct work_struct *_work) unsigned long flags; int empty; int ret = 0; + int destroy_id; spin_lock_irqsave(&cm_id_priv->lock, flags); empty = list_empty(&cm_id_priv->work_list); @@ -857,9 +858,9 @@ static void cm_work_handler(struct work_struct *_work) destroy_cm_id(&cm_id_priv->id); } BUG_ON(atomic_read(&cm_id_priv->refcount)==0); + destroy_id = test_bit(IWCM_F_CALLBACK_DESTROY, &cm_id_priv->flags); if (iwcm_deref_id(cm_id_priv)) { - if (test_bit(IWCM_F_CALLBACK_DESTROY, - &cm_id_priv->flags)) { + if (destroy_id) { BUG_ON(!list_empty(&cm_id_priv->work_list)); free_cm_id(cm_id_priv); } diff --git a/drivers/infiniband/hw/cxgb3/iwch_mem.c b/drivers/infiniband/hw/cxgb3/iwch_mem.c index 73bfd1656f86..b8797c66676d 100644 --- a/drivers/infiniband/hw/cxgb3/iwch_mem.c +++ b/drivers/infiniband/hw/cxgb3/iwch_mem.c @@ -136,14 +136,8 @@ int build_phys_page_list(struct ib_phys_buf *buffer_list, /* Find largest page shift we can use to cover buffers */ for (*shift = PAGE_SHIFT; *shift < 27; ++(*shift)) - if (num_phys_buf > 1) { - if ((1ULL << *shift) & mask) - break; - } else - if (1ULL << *shift >= - buffer_list[0].size + - (buffer_list[0].addr & ((1ULL << *shift) - 1))) - break; + if ((1ULL << *shift) & mask) + break; buffer_list[0].size += buffer_list[0].addr & ((1ULL << *shift) - 1); buffer_list[0].addr &= ~0ull << *shift; diff --git a/drivers/infiniband/hw/cxgb3/iwch_provider.c b/drivers/infiniband/hw/cxgb3/iwch_provider.c index df1838f8f94d..b2ea9210467f 100644 --- a/drivers/infiniband/hw/cxgb3/iwch_provider.c +++ b/drivers/infiniband/hw/cxgb3/iwch_provider.c @@ -189,7 +189,7 @@ static struct ib_cq *iwch_create_cq(struct ib_device *ibdev, int entries, int ve return ERR_PTR(-ENOMEM); } chp->rhp = rhp; - chp->ibcq.cqe = (1 << chp->cq.size_log2) - 1; + chp->ibcq.cqe = 1 << chp->cq.size_log2; spin_lock_init(&chp->lock); atomic_set(&chp->refcnt, 1); init_waitqueue_head(&chp->wait); @@ -819,8 +819,11 @@ static struct ib_qp *iwch_create_qp(struct ib_pd *pd, kfree(qhp); return ERR_PTR(-ENOMEM); } + attrs->cap.max_recv_wr = rqsize - 1; attrs->cap.max_send_wr = sqsize; + attrs->cap.max_inline_data = T3_MAX_INLINE; + qhp->rhp = rhp; qhp->attr.pd = php->pdid; qhp->attr.scq = ((struct iwch_cq *) attrs->send_cq)->cq.cqid; diff --git a/drivers/infiniband/hw/nes/nes.c b/drivers/infiniband/hw/nes/nes.c index 7f8853b44ee1..b2112f5a422f 100644 --- a/drivers/infiniband/hw/nes/nes.c +++ b/drivers/infiniband/hw/nes/nes.c @@ -567,12 +567,12 @@ static int __devinit nes_probe(struct pci_dev *pcidev, const struct pci_device_i /* Init the adapter */ nesdev->nesadapter = nes_init_adapter(nesdev, hw_rev); - nesdev->nesadapter->et_rx_coalesce_usecs_irq = interrupt_mod_interval; if (!nesdev->nesadapter) { printk(KERN_ERR PFX "Unable to initialize adapter.\n"); ret = -ENOMEM; goto bail5; } + nesdev->nesadapter->et_rx_coalesce_usecs_irq = interrupt_mod_interval; /* nesdev->base_doorbell_index = nesdev->nesadapter->pd_config_base[PCI_FUNC(nesdev->pcidev->devfn)]; */ diff --git a/drivers/infiniband/hw/nes/nes.h b/drivers/infiniband/hw/nes/nes.h index fd57e8a1582f..a48b288618ec 100644 --- a/drivers/infiniband/hw/nes/nes.h +++ b/drivers/infiniband/hw/nes/nes.h @@ -285,6 +285,21 @@ struct nes_device { }; +static inline __le32 get_crc_value(struct nes_v4_quad *nes_quad) +{ + u32 crc_value; + crc_value = crc32c(~0, (void *)nes_quad, sizeof (struct nes_v4_quad)); + + /* + * With commit ef19454b ("[LIB] crc32c: Keep intermediate crc + * state in cpu order"), behavior of crc32c changes on + * big-endian platforms. Our algorithm expects the previous + * behavior; otherwise we have RDMA connection establishment + * issue on big-endian. + */ + return cpu_to_le32(crc_value); +} + static inline void set_wqe_64bit_value(__le32 *wqe_words, u32 index, u64 value) { diff --git a/drivers/infiniband/hw/nes/nes_cm.c b/drivers/infiniband/hw/nes/nes_cm.c index bd5cfeaac203..39adb267fb15 100644 --- a/drivers/infiniband/hw/nes/nes_cm.c +++ b/drivers/infiniband/hw/nes/nes_cm.c @@ -370,11 +370,11 @@ int schedule_nes_timer(struct nes_cm_node *cm_node, struct sk_buff *skb, int ret = 0; u32 was_timer_set; + if (!cm_node) + return -EINVAL; new_send = kzalloc(sizeof(*new_send), GFP_ATOMIC); if (!new_send) return -1; - if (!cm_node) - return -EINVAL; /* new_send->timetosend = currenttime */ new_send->retrycount = NES_DEFAULT_RETRYS; @@ -947,6 +947,7 @@ static int mini_cm_dec_refcnt_listen(struct nes_cm_core *cm_core, nes_debug(NES_DBG_CM, "destroying listener (%p)\n", listener); kfree(listener); + listener = NULL; ret = 0; cm_listens_destroyed++; } else { @@ -2319,6 +2320,7 @@ int nes_accept(struct iw_cm_id *cm_id, struct iw_cm_conn_param *conn_param) struct iw_cm_event cm_event; struct nes_hw_qp_wqe *wqe; struct nes_v4_quad nes_quad; + u32 crc_value; int ret; ibqp = nes_get_qp(cm_id->device, conn_param->qpn); @@ -2435,8 +2437,8 @@ int nes_accept(struct iw_cm_id *cm_id, struct iw_cm_conn_param *conn_param) nes_quad.TcpPorts[1] = cm_id->local_addr.sin_port; /* Produce hash key */ - nesqp->hte_index = cpu_to_be32( - crc32c(~0, (void *)&nes_quad, sizeof(nes_quad)) ^ 0xffffffff); + crc_value = get_crc_value(&nes_quad); + nesqp->hte_index = cpu_to_be32(crc_value ^ 0xffffffff); nes_debug(NES_DBG_CM, "HTE Index = 0x%08X, CRC = 0x%08X\n", nesqp->hte_index, nesqp->hte_index & adapter->hte_index_mask); @@ -2750,6 +2752,7 @@ void cm_event_connected(struct nes_cm_event *event) struct iw_cm_event cm_event; struct nes_hw_qp_wqe *wqe; struct nes_v4_quad nes_quad; + u32 crc_value; int ret; /* get all our handles */ @@ -2827,8 +2830,8 @@ void cm_event_connected(struct nes_cm_event *event) nes_quad.TcpPorts[1] = cm_id->local_addr.sin_port; /* Produce hash key */ - nesqp->hte_index = cpu_to_be32( - crc32c(~0, (void *)&nes_quad, sizeof(nes_quad)) ^ 0xffffffff); + crc_value = get_crc_value(&nes_quad); + nesqp->hte_index = cpu_to_be32(crc_value ^ 0xffffffff); nes_debug(NES_DBG_CM, "HTE Index = 0x%08X, After CRC = 0x%08X\n", nesqp->hte_index, nesqp->hte_index & nesadapter->hte_index_mask); diff --git a/drivers/infiniband/hw/nes/nes_hw.c b/drivers/infiniband/hw/nes/nes_hw.c index 7c4c0fbf0abd..49e53e4c1ebe 100644 --- a/drivers/infiniband/hw/nes/nes_hw.c +++ b/drivers/infiniband/hw/nes/nes_hw.c @@ -156,15 +156,14 @@ static void nes_nic_tune_timer(struct nes_device *nesdev) spin_lock_irqsave(&nesadapter->periodic_timer_lock, flags); - if (shared_timer->cq_count_old < cq_count) { - if (cq_count > shared_timer->threshold_low) - shared_timer->cq_direction_downward=0; - } - if (shared_timer->cq_count_old >= cq_count) + if (shared_timer->cq_count_old <= cq_count) + shared_timer->cq_direction_downward = 0; + else shared_timer->cq_direction_downward++; shared_timer->cq_count_old = cq_count; if (shared_timer->cq_direction_downward > NES_NIC_CQ_DOWNWARD_TREND) { - if (cq_count <= shared_timer->threshold_low) { + if (cq_count <= shared_timer->threshold_low && + shared_timer->threshold_low > 4) { shared_timer->threshold_low = shared_timer->threshold_low/2; shared_timer->cq_direction_downward=0; nesdev->currcq_count = 0; @@ -1728,7 +1727,6 @@ int nes_napi_isr(struct nes_device *nesdev) nesdev->int_req &= ~NES_INT_TIMER; nes_write32(nesdev->regs+NES_INTF_INT_MASK, ~(nesdev->intf_int_req)); nes_write32(nesdev->regs+NES_INT_MASK, ~nesdev->int_req); - nesadapter->tune_timer.timer_in_use_old = 0; } nesdev->deepcq_count = 0; return 1; @@ -1867,7 +1865,6 @@ void nes_dpc(unsigned long param) nesdev->int_req &= ~NES_INT_TIMER; nes_write32(nesdev->regs + NES_INTF_INT_MASK, ~(nesdev->intf_int_req)); nes_write32(nesdev->regs+NES_INT_MASK, ~nesdev->int_req); - nesdev->nesadapter->tune_timer.timer_in_use_old = 0; } else { nes_write32(nesdev->regs+NES_INT_MASK, 0x0000ffff|(~nesdev->int_req)); } diff --git a/drivers/infiniband/hw/nes/nes_hw.h b/drivers/infiniband/hw/nes/nes_hw.h index 1e10df550c9e..b7e2844f096b 100644 --- a/drivers/infiniband/hw/nes/nes_hw.h +++ b/drivers/infiniband/hw/nes/nes_hw.h @@ -962,7 +962,7 @@ struct nes_arp_entry { #define DEFAULT_JUMBO_NES_QL_LOW 12 #define DEFAULT_JUMBO_NES_QL_TARGET 40 #define DEFAULT_JUMBO_NES_QL_HIGH 128 -#define NES_NIC_CQ_DOWNWARD_TREND 8 +#define NES_NIC_CQ_DOWNWARD_TREND 16 struct nes_hw_tune_timer { //u16 cq_count; diff --git a/drivers/infiniband/hw/nes/nes_verbs.c b/drivers/infiniband/hw/nes/nes_verbs.c index 4dafbe16e82a..a651e9d9f0ef 100644 --- a/drivers/infiniband/hw/nes/nes_verbs.c +++ b/drivers/infiniband/hw/nes/nes_verbs.c @@ -929,7 +929,7 @@ static struct ib_pd *nes_alloc_pd(struct ib_device *ibdev, NES_MAX_USER_DB_REGIONS, nesucontext->first_free_db); nes_debug(NES_DBG_PD, "find_first_zero_biton doorbells returned %u, mapping pd_id %u.\n", nespd->mmap_db_index, nespd->pd_id); - if (nespd->mmap_db_index > NES_MAX_USER_DB_REGIONS) { + if (nespd->mmap_db_index >= NES_MAX_USER_DB_REGIONS) { nes_debug(NES_DBG_PD, "mmap_db_index > MAX\n"); nes_free_resource(nesadapter, nesadapter->allocated_pds, pd_num); kfree(nespd); @@ -1327,7 +1327,7 @@ static struct ib_qp *nes_create_qp(struct ib_pd *ibpd, (long long unsigned int)req.user_wqe_buffers); nes_free_resource(nesadapter, nesadapter->allocated_qps, qp_num); kfree(nesqp->allocated_buffer); - return ERR_PTR(-ENOMEM); + return ERR_PTR(-EFAULT); } } @@ -1674,6 +1674,7 @@ static struct ib_cq *nes_create_cq(struct ib_device *ibdev, int entries, } nes_debug(NES_DBG_CQ, "CQ Virtual Address = %08lX, size = %u.\n", (unsigned long)req.user_cq_buffer, entries); + err = 1; list_for_each_entry(nespbl, &nes_ucontext->cq_reg_mem_list, list) { if (nespbl->user_base == (unsigned long )req.user_cq_buffer) { list_del(&nespbl->list); @@ -1686,7 +1687,7 @@ static struct ib_cq *nes_create_cq(struct ib_device *ibdev, int entries, if (err) { nes_free_resource(nesadapter, nesadapter->allocated_cqs, cq_num); kfree(nescq); - return ERR_PTR(err); + return ERR_PTR(-EFAULT); } pbl_entries = nespbl->pbl_size >> 3; @@ -1831,9 +1832,6 @@ static struct ib_cq *nes_create_cq(struct ib_device *ibdev, int entries, spin_unlock_irqrestore(&nesdev->cqp.lock, flags); } } - nes_debug(NES_DBG_CQ, "iWARP CQ%u create timeout expired, major code = 0x%04X," - " minor code = 0x%04X\n", - nescq->hw_cq.cq_number, cqp_request->major_code, cqp_request->minor_code); if (!context) pci_free_consistent(nesdev->pcidev, nescq->cq_mem_size, mem, nescq->hw_cq.cq_pbase); diff --git a/drivers/infiniband/ulp/iser/iser_verbs.c b/drivers/infiniband/ulp/iser/iser_verbs.c index 714b8db02b29..993f0a8ff28f 100644 --- a/drivers/infiniband/ulp/iser/iser_verbs.c +++ b/drivers/infiniband/ulp/iser/iser_verbs.c @@ -237,36 +237,32 @@ static int iser_free_ib_conn_res(struct iser_conn *ib_conn) static struct iser_device *iser_device_find_by_ib_device(struct rdma_cm_id *cma_id) { - struct list_head *p_list; - struct iser_device *device = NULL; + struct iser_device *device; mutex_lock(&ig.device_list_mutex); - p_list = ig.device_list.next; - while (p_list != &ig.device_list) { - device = list_entry(p_list, struct iser_device, ig_list); + list_for_each_entry(device, &ig.device_list, ig_list) /* find if there's a match using the node GUID */ if (device->ib_device->node_guid == cma_id->device->node_guid) - break; - } + goto inc_refcnt; - if (device == NULL) { - device = kzalloc(sizeof *device, GFP_KERNEL); - if (device == NULL) - goto out; - /* assign this device to the device */ - device->ib_device = cma_id->device; - /* init the device and link it into ig device list */ - if (iser_create_device_ib_res(device)) { - kfree(device); - device = NULL; - goto out; - } - list_add(&device->ig_list, &ig.device_list); + device = kzalloc(sizeof *device, GFP_KERNEL); + if (device == NULL) + goto out; + + /* assign this device to the device */ + device->ib_device = cma_id->device; + /* init the device and link it into ig device list */ + if (iser_create_device_ib_res(device)) { + kfree(device); + device = NULL; + goto out; } -out: - BUG_ON(device == NULL); + list_add(&device->ig_list, &ig.device_list); + +inc_refcnt: device->refcount++; +out: mutex_unlock(&ig.device_list_mutex); return device; } @@ -372,6 +368,12 @@ static void iser_addr_handler(struct rdma_cm_id *cma_id) int ret; device = iser_device_find_by_ib_device(cma_id); + if (!device) { + iser_err("device lookup/creation failed\n"); + iser_connect_error(cma_id); + return; + } + ib_conn = (struct iser_conn *)cma_id->context; ib_conn->device = device; @@ -380,7 +382,6 @@ static void iser_addr_handler(struct rdma_cm_id *cma_id) iser_err("resolve route failed: %d\n", ret); iser_connect_error(cma_id); } - return; } static void iser_route_handler(struct rdma_cm_id *cma_id) diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index 8b10d9f23bef..c5263d63aca3 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -42,14 +42,14 @@ config INPUT_M68K_BEEP config INPUT_APANEL tristate "Fujitsu Lifebook Application Panel buttons" - depends on X86 - select I2C_I801 + depends on X86 && I2C && LEDS_CLASS select INPUT_POLLDEV select CHECK_SIGNATURE help Say Y here for support of the Application Panel buttons, used on Fujitsu Lifebook. These are attached to the mainboard through - an SMBus interface managed by the I2C Intel ICH (i801) driver. + an SMBus interface managed by the I2C Intel ICH (i801) driver, + which you should also build for this kernel. To compile this driver as a module, choose M here: the module will be called apanel. diff --git a/drivers/input/serio/i8042.h b/drivers/input/serio/i8042.h index dd22d91f8b39..c972e5d03a3f 100644 --- a/drivers/input/serio/i8042.h +++ b/drivers/input/serio/i8042.h @@ -16,7 +16,7 @@ #if defined(CONFIG_MACH_JAZZ) #include "i8042-jazzio.h" -#elif defined(CONFIG_SGI_IP22) +#elif defined(CONFIG_SGI_HAS_I8042) #include "i8042-ip22io.h" #elif defined(CONFIG_PPC) #include "i8042-ppcio.h" diff --git a/drivers/isdn/gigaset/common.c b/drivers/isdn/gigaset/common.c index aacedec4986f..827c32c16795 100644 --- a/drivers/isdn/gigaset/common.c +++ b/drivers/isdn/gigaset/common.c @@ -637,7 +637,6 @@ struct cardstate *gigaset_initcs(struct gigaset_driver *drv, int channels, err("maximum number of devices exceeded"); return NULL; } - mutex_init(&cs->mutex); gig_dbg(DEBUG_INIT, "allocating bcs[0..%d]", channels - 1); cs->bcs = kmalloc(channels * sizeof(struct bc_state), GFP_KERNEL); @@ -898,8 +897,10 @@ int gigaset_shutdown(struct cardstate *cs) { mutex_lock(&cs->mutex); - if (!(cs->flags & VALID_MINOR)) + if (!(cs->flags & VALID_MINOR)) { + mutex_unlock(&cs->mutex); return -1; + } cs->waiting = 1; @@ -1086,6 +1087,7 @@ struct gigaset_driver *gigaset_initdriver(unsigned minor, unsigned minors, drv->cs[i].driver = drv; drv->cs[i].ops = drv->ops; drv->cs[i].minor_index = i; + mutex_init(&drv->cs[i].mutex); } gigaset_if_initdriver(drv, procname, devname); diff --git a/drivers/isdn/hisax/hisax_fcpcipnp.c b/drivers/isdn/hisax/hisax_fcpcipnp.c index 7993e01f9fc5..76043dedba5b 100644 --- a/drivers/isdn/hisax/hisax_fcpcipnp.c +++ b/drivers/isdn/hisax/hisax_fcpcipnp.c @@ -725,23 +725,6 @@ static int __devinit fcpcipnp_setup(struct fritz_adapter *adapter) switch (adapter->type) { case AVM_FRITZ_PCIV2: - retval = request_irq(adapter->irq, fcpci2_irq, IRQF_SHARED, - "fcpcipnp", adapter); - break; - case AVM_FRITZ_PCI: - retval = request_irq(adapter->irq, fcpci_irq, IRQF_SHARED, - "fcpcipnp", adapter); - break; - case AVM_FRITZ_PNP: - retval = request_irq(adapter->irq, fcpci_irq, 0, - "fcpcipnp", adapter); - break; - } - if (retval) - goto err_region; - - switch (adapter->type) { - case AVM_FRITZ_PCIV2: case AVM_FRITZ_PCI: val = inl(adapter->io); break; @@ -796,6 +779,23 @@ static int __devinit fcpcipnp_setup(struct fritz_adapter *adapter) switch (adapter->type) { case AVM_FRITZ_PCIV2: + retval = request_irq(adapter->irq, fcpci2_irq, IRQF_SHARED, + "fcpcipnp", adapter); + break; + case AVM_FRITZ_PCI: + retval = request_irq(adapter->irq, fcpci_irq, IRQF_SHARED, + "fcpcipnp", adapter); + break; + case AVM_FRITZ_PNP: + retval = request_irq(adapter->irq, fcpci_irq, 0, + "fcpcipnp", adapter); + break; + } + if (retval) + goto err_region; + + switch (adapter->type) { + case AVM_FRITZ_PCIV2: fcpci2_init(adapter); isacsx_setup(&adapter->isac); break; diff --git a/drivers/isdn/i4l/isdn_common.c b/drivers/isdn/i4l/isdn_common.c index 9cef6fcf587b..d4ad6992f776 100644 --- a/drivers/isdn/i4l/isdn_common.c +++ b/drivers/isdn/i4l/isdn_common.c @@ -981,13 +981,13 @@ isdn_readbchan_tty(int di, int channel, struct tty_struct *tty, int cisco_hack) } -static __inline int +static inline int isdn_minor2drv(int minor) { return (dev->drvmap[minor]); } -static __inline int +static inline int isdn_minor2chan(int minor) { return (dev->chanmap[minor]); diff --git a/drivers/isdn/i4l/isdn_ttyfax.c b/drivers/isdn/i4l/isdn_ttyfax.c index f93de4a30355..78f7660c1d0e 100644 --- a/drivers/isdn/i4l/isdn_ttyfax.c +++ b/drivers/isdn/i4l/isdn_ttyfax.c @@ -906,7 +906,8 @@ isdn_tty_cmd_FCLASS2(char **p, modem_info * info) sprintf(rs, "\r\n0-2"); isdn_tty_at_cout(rs, info); } else { - if ((f->phase != ISDN_FAX_PHASE_D) || (!info->faxonline & 1)) + if ((f->phase != ISDN_FAX_PHASE_D) || + (!(info->faxonline & 1))) PARSE_ERROR1; par = isdn_getnum(p); if ((par < 0) || (par > 2)) diff --git a/drivers/isdn/i4l/isdn_v110.c b/drivers/isdn/i4l/isdn_v110.c index 5484d3c38a57..c5d02b6aafab 100644 --- a/drivers/isdn/i4l/isdn_v110.c +++ b/drivers/isdn/i4l/isdn_v110.c @@ -62,7 +62,7 @@ static unsigned char V110_OffMatrix_38400[] = * and to 67452301 when keylen = 2. This is necessary because ordering on * the isdn line is the other way. */ -static __inline unsigned char +static inline unsigned char FlipBits(unsigned char c, int keylen) { unsigned char b = c; diff --git a/drivers/isdn/isdnloop/isdnloop.c b/drivers/isdn/isdnloop/isdnloop.c index 655ef9a3f4df..a335c85a736e 100644 --- a/drivers/isdn/isdnloop/isdnloop.c +++ b/drivers/isdn/isdnloop/isdnloop.c @@ -1289,7 +1289,7 @@ isdnloop_command(isdn_ctrl * c, isdnloop_card * card) } break; case ISDN_CMD_CLREAZ: - if (!card->flags & ISDNLOOP_FLAGS_RUNNING) + if (!(card->flags & ISDNLOOP_FLAGS_RUNNING)) return -ENODEV; if (card->leased) break; @@ -1333,7 +1333,7 @@ isdnloop_command(isdn_ctrl * c, isdnloop_card * card) } break; case ISDN_CMD_SETL3: - if (!card->flags & ISDNLOOP_FLAGS_RUNNING) + if (!(card->flags & ISDNLOOP_FLAGS_RUNNING)) return -ENODEV; return 0; default: @@ -1380,7 +1380,7 @@ if_writecmd(const u_char __user *buf, int len, int id, int channel) isdnloop_card *card = isdnloop_findcard(id); if (card) { - if (!card->flags & ISDNLOOP_FLAGS_RUNNING) + if (!(card->flags & ISDNLOOP_FLAGS_RUNNING)) return -ENODEV; return (isdnloop_writecmd(buf, len, 1, card)); } diff --git a/drivers/lguest/core.c b/drivers/lguest/core.c index 7743d73768df..c632c08cbbdc 100644 --- a/drivers/lguest/core.c +++ b/drivers/lguest/core.c @@ -69,11 +69,22 @@ static __init int map_switcher(void) switcher_page[i] = virt_to_page(addr); } + /* First we check that the Switcher won't overlap the fixmap area at + * the top of memory. It's currently nowhere near, but it could have + * very strange effects if it ever happened. */ + if (SWITCHER_ADDR + (TOTAL_SWITCHER_PAGES+1)*PAGE_SIZE > FIXADDR_START){ + err = -ENOMEM; + printk("lguest: mapping switcher would thwack fixmap\n"); + goto free_pages; + } + /* Now we reserve the "virtual memory area" we want: 0xFFC00000 * (SWITCHER_ADDR). We might not get it in theory, but in practice - * it's worked so far. */ + * it's worked so far. The end address needs +1 because __get_vm_area + * allocates an extra guard page, so we need space for that. */ switcher_vma = __get_vm_area(TOTAL_SWITCHER_PAGES * PAGE_SIZE, - VM_ALLOC, SWITCHER_ADDR, VMALLOC_END); + VM_ALLOC, SWITCHER_ADDR, SWITCHER_ADDR + + (TOTAL_SWITCHER_PAGES+1) * PAGE_SIZE); if (!switcher_vma) { err = -ENOMEM; printk("lguest: could not map switcher pages high\n"); diff --git a/drivers/lguest/lguest_user.c b/drivers/lguest/lguest_user.c index 85d42d3d01a9..2221485b0773 100644 --- a/drivers/lguest/lguest_user.c +++ b/drivers/lguest/lguest_user.c @@ -241,15 +241,16 @@ static ssize_t write(struct file *file, const char __user *in, cpu = &lg->cpus[cpu_id]; if (!cpu) return -EINVAL; - } - /* Once the Guest is dead, all you can do is read() why it died. */ - if (lg && lg->dead) - return -ENOENT; + /* Once the Guest is dead, you can only read() why it died. */ + if (lg->dead) + return -ENOENT; - /* If you're not the task which owns the Guest, you can only break */ - if (lg && current != cpu->tsk && req != LHREQ_BREAK) - return -EPERM; + /* If you're not the task which owns the Guest, all you can do + * is break the Launcher out of running the Guest. */ + if (current != cpu->tsk && req != LHREQ_BREAK) + return -EPERM; + } switch (req) { case LHREQ_INITIALIZE: diff --git a/drivers/lguest/page_tables.c b/drivers/lguest/page_tables.c index 275f23c2deb4..a7f64a9d67e0 100644 --- a/drivers/lguest/page_tables.c +++ b/drivers/lguest/page_tables.c @@ -391,7 +391,7 @@ static unsigned int find_pgdir(struct lguest *lg, unsigned long pgtable) { unsigned int i; for (i = 0; i < ARRAY_SIZE(lg->pgdirs); i++) - if (lg->pgdirs[i].gpgdir == pgtable) + if (lg->pgdirs[i].pgdir && lg->pgdirs[i].gpgdir == pgtable) break; return i; } diff --git a/drivers/macintosh/via-pmu-backlight.c b/drivers/macintosh/via-pmu-backlight.c index 741a2e3f4fc6..a348bb0791d3 100644 --- a/drivers/macintosh/via-pmu-backlight.c +++ b/drivers/macintosh/via-pmu-backlight.c @@ -17,7 +17,7 @@ static struct backlight_ops pmu_backlight_data; static DEFINE_SPINLOCK(pmu_backlight_lock); -static int sleeping; +static int sleeping, uses_pmu_bl; static u8 bl_curve[FB_BACKLIGHT_LEVELS]; static void pmu_backlight_init_curve(u8 off, u8 min, u8 max) @@ -128,7 +128,7 @@ void pmu_backlight_set_sleep(int sleep) spin_lock_irqsave(&pmu_backlight_lock, flags); sleeping = sleep; - if (pmac_backlight) { + if (pmac_backlight && uses_pmu_bl) { if (sleep) { struct adb_request req; @@ -166,6 +166,7 @@ void __init pmu_backlight_init() printk(KERN_ERR "PMU Backlight registration failed\n"); return; } + uses_pmu_bl = 1; bd->props.max_brightness = FB_BACKLIGHT_LEVELS - 1; pmu_backlight_init_curve(0x7F, 0x46, 0x0E); diff --git a/drivers/macintosh/via-pmu.c b/drivers/macintosh/via-pmu.c index ebec663d5d37..d6365a9f0637 100644 --- a/drivers/macintosh/via-pmu.c +++ b/drivers/macintosh/via-pmu.c @@ -2528,7 +2528,7 @@ EXPORT_SYMBOL(pmu_wait_complete); EXPORT_SYMBOL(pmu_suspend); EXPORT_SYMBOL(pmu_resume); EXPORT_SYMBOL(pmu_unlock); -#if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC32) +#if defined(CONFIG_PPC32) EXPORT_SYMBOL(pmu_enable_irled); EXPORT_SYMBOL(pmu_battery_count); EXPORT_SYMBOL(pmu_batteries); diff --git a/drivers/md/bitmap.c b/drivers/md/bitmap.c index 7aeceedcf7d4..c14dacdacfac 100644 --- a/drivers/md/bitmap.c +++ b/drivers/md/bitmap.c @@ -1045,8 +1045,14 @@ void bitmap_daemon_work(struct bitmap *bitmap) if (bitmap == NULL) return; if (time_before(jiffies, bitmap->daemon_lastrun + bitmap->daemon_sleep*HZ)) - return; + goto done; + bitmap->daemon_lastrun = jiffies; + if (bitmap->allclean) { + bitmap->mddev->thread->timeout = MAX_SCHEDULE_TIMEOUT; + return; + } + bitmap->allclean = 1; for (j = 0; j < bitmap->chunks; j++) { bitmap_counter_t *bmc; @@ -1068,8 +1074,10 @@ void bitmap_daemon_work(struct bitmap *bitmap) clear_page_attr(bitmap, page, BITMAP_PAGE_NEEDWRITE); spin_unlock_irqrestore(&bitmap->lock, flags); - if (need_write) + if (need_write) { write_page(bitmap, page, 0); + bitmap->allclean = 0; + } continue; } @@ -1098,6 +1106,9 @@ void bitmap_daemon_work(struct bitmap *bitmap) /* if (j < 100) printk("bitmap: j=%lu, *bmc = 0x%x\n", j, *bmc); */ + if (*bmc) + bitmap->allclean = 0; + if (*bmc == 2) { *bmc=1; /* maybe clear the bit next time */ set_page_attr(bitmap, page, BITMAP_PAGE_CLEAN); @@ -1132,6 +1143,9 @@ void bitmap_daemon_work(struct bitmap *bitmap) } } + done: + if (bitmap->allclean == 0) + bitmap->mddev->thread->timeout = bitmap->daemon_sleep * HZ; } static bitmap_counter_t *bitmap_get_counter(struct bitmap *bitmap, @@ -1226,6 +1240,7 @@ int bitmap_startwrite(struct bitmap *bitmap, sector_t offset, unsigned long sect sectors -= blocks; else sectors = 0; } + bitmap->allclean = 0; return 0; } @@ -1296,6 +1311,7 @@ int bitmap_start_sync(struct bitmap *bitmap, sector_t offset, int *blocks, } } spin_unlock_irq(&bitmap->lock); + bitmap->allclean = 0; return rv; } @@ -1332,6 +1348,7 @@ void bitmap_end_sync(struct bitmap *bitmap, sector_t offset, int *blocks, int ab } unlock: spin_unlock_irqrestore(&bitmap->lock, flags); + bitmap->allclean = 0; } void bitmap_close_sync(struct bitmap *bitmap) @@ -1399,7 +1416,7 @@ static void bitmap_set_memory_bits(struct bitmap *bitmap, sector_t offset, int n set_page_attr(bitmap, page, BITMAP_PAGE_CLEAN); } spin_unlock_irq(&bitmap->lock); - + bitmap->allclean = 0; } /* dirty the memory and file bits for bitmap chunks "s" to "e" */ diff --git a/drivers/md/md.c b/drivers/md/md.c index 7da6ec244e15..ccbbf63727cc 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -1105,7 +1105,11 @@ static int super_1_load(mdk_rdev_t *rdev, mdk_rdev_t *refdev, int minor_version) rdev->sb_size = le32_to_cpu(sb->max_dev) * 2 + 256; bmask = queue_hardsect_size(rdev->bdev->bd_disk->queue)-1; if (rdev->sb_size & bmask) - rdev-> sb_size = (rdev->sb_size | bmask)+1; + rdev->sb_size = (rdev->sb_size | bmask) + 1; + + if (minor_version + && rdev->data_offset < sb_offset + (rdev->sb_size/512)) + return -EINVAL; if (sb->level == cpu_to_le32(LEVEL_MULTIPATH)) rdev->desc_nr = -1; @@ -1137,7 +1141,7 @@ static int super_1_load(mdk_rdev_t *rdev, mdk_rdev_t *refdev, int minor_version) else ret = 0; } - if (minor_version) + if (minor_version) rdev->size = ((rdev->bdev->bd_inode->i_size>>9) - le64_to_cpu(sb->data_offset)) / 2; else rdev->size = rdev->sb_offset; @@ -1499,7 +1503,8 @@ static void export_rdev(mdk_rdev_t * rdev) free_disk_sb(rdev); list_del_init(&rdev->same_set); #ifndef MODULE - md_autodetect_dev(rdev->bdev->bd_dev); + if (test_bit(AutoDetected, &rdev->flags)) + md_autodetect_dev(rdev->bdev->bd_dev); #endif unlock_rdev(rdev); kobject_put(&rdev->kobj); @@ -1996,9 +2001,11 @@ rdev_size_store(mdk_rdev_t *rdev, const char *buf, size_t len) char *e; unsigned long long size = simple_strtoull(buf, &e, 10); unsigned long long oldsize = rdev->size; + mddev_t *my_mddev = rdev->mddev; + if (e==buf || (*e && *e != '\n')) return -EINVAL; - if (rdev->mddev->pers) + if (my_mddev->pers) return -EBUSY; rdev->size = size; if (size > oldsize && rdev->mddev->external) { @@ -2011,7 +2018,7 @@ rdev_size_store(mdk_rdev_t *rdev, const char *buf, size_t len) int overlap = 0; struct list_head *tmp, *tmp2; - mddev_unlock(rdev->mddev); + mddev_unlock(my_mddev); for_each_mddev(mddev, tmp) { mdk_rdev_t *rdev2; @@ -2031,7 +2038,7 @@ rdev_size_store(mdk_rdev_t *rdev, const char *buf, size_t len) break; } } - mddev_lock(rdev->mddev); + mddev_lock(my_mddev); if (overlap) { /* Someone else could have slipped in a size * change here, but doing so is just silly. @@ -2043,8 +2050,8 @@ rdev_size_store(mdk_rdev_t *rdev, const char *buf, size_t len) return -EBUSY; } } - if (size < rdev->mddev->size || rdev->mddev->size == 0) - rdev->mddev->size = size; + if (size < my_mddev->size || my_mddev->size == 0) + my_mddev->size = size; return len; } @@ -2065,10 +2072,21 @@ rdev_attr_show(struct kobject *kobj, struct attribute *attr, char *page) { struct rdev_sysfs_entry *entry = container_of(attr, struct rdev_sysfs_entry, attr); mdk_rdev_t *rdev = container_of(kobj, mdk_rdev_t, kobj); + mddev_t *mddev = rdev->mddev; + ssize_t rv; if (!entry->show) return -EIO; - return entry->show(rdev, page); + + rv = mddev ? mddev_lock(mddev) : -EBUSY; + if (!rv) { + if (rdev->mddev == NULL) + rv = -EBUSY; + else + rv = entry->show(rdev, page); + mddev_unlock(mddev); + } + return rv; } static ssize_t @@ -2077,15 +2095,19 @@ rdev_attr_store(struct kobject *kobj, struct attribute *attr, { struct rdev_sysfs_entry *entry = container_of(attr, struct rdev_sysfs_entry, attr); mdk_rdev_t *rdev = container_of(kobj, mdk_rdev_t, kobj); - int rv; + ssize_t rv; + mddev_t *mddev = rdev->mddev; if (!entry->store) return -EIO; if (!capable(CAP_SYS_ADMIN)) return -EACCES; - rv = mddev_lock(rdev->mddev); + rv = mddev ? mddev_lock(mddev): -EBUSY; if (!rv) { - rv = entry->store(rdev, page, length); + if (rdev->mddev == NULL) + rv = -EBUSY; + else + rv = entry->store(rdev, page, length); mddev_unlock(rdev->mddev); } return rv; @@ -5127,7 +5149,7 @@ static int md_seq_show(struct seq_file *seq, void *v) if (mddev->ro==1) seq_printf(seq, " (read-only)"); if (mddev->ro==2) - seq_printf(seq, "(auto-read-only)"); + seq_printf(seq, " (auto-read-only)"); seq_printf(seq, " %s", mddev->pers->name); } @@ -5351,6 +5373,7 @@ void md_write_start(mddev_t *mddev, struct bio *bi) mddev->ro = 0; set_bit(MD_RECOVERY_NEEDED, &mddev->recovery); md_wakeup_thread(mddev->thread); + md_wakeup_thread(mddev->sync_thread); } atomic_inc(&mddev->writes_pending); if (mddev->in_sync) { @@ -6021,6 +6044,7 @@ static void autostart_arrays(int part) MD_BUG(); continue; } + set_bit(AutoDetected, &rdev->flags); list_add(&rdev->same_set, &pending_raid_disks); i_passed++; } diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c index 5c7fef091cec..ff61b309129a 100644 --- a/drivers/md/raid1.c +++ b/drivers/md/raid1.c @@ -592,6 +592,37 @@ static int raid1_congested(void *data, int bits) } +static int flush_pending_writes(conf_t *conf) +{ + /* Any writes that have been queued but are awaiting + * bitmap updates get flushed here. + * We return 1 if any requests were actually submitted. + */ + int rv = 0; + + spin_lock_irq(&conf->device_lock); + + if (conf->pending_bio_list.head) { + struct bio *bio; + bio = bio_list_get(&conf->pending_bio_list); + blk_remove_plug(conf->mddev->queue); + spin_unlock_irq(&conf->device_lock); + /* flush any pending bitmap writes to + * disk before proceeding w/ I/O */ + bitmap_unplug(conf->mddev->bitmap); + + while (bio) { /* submit pending writes */ + struct bio *next = bio->bi_next; + bio->bi_next = NULL; + generic_make_request(bio); + bio = next; + } + rv = 1; + } else + spin_unlock_irq(&conf->device_lock); + return rv; +} + /* Barriers.... * Sometimes we need to suspend IO while we do something else, * either some resync/recovery, or reconfigure the array. @@ -673,15 +704,23 @@ static void freeze_array(conf_t *conf) /* stop syncio and normal IO and wait for everything to * go quite. * We increment barrier and nr_waiting, and then - * wait until barrier+nr_pending match nr_queued+2 + * wait until nr_pending match nr_queued+1 + * This is called in the context of one normal IO request + * that has failed. Thus any sync request that might be pending + * will be blocked by nr_pending, and we need to wait for + * pending IO requests to complete or be queued for re-try. + * Thus the number queued (nr_queued) plus this request (1) + * must match the number of pending IOs (nr_pending) before + * we continue. */ spin_lock_irq(&conf->resync_lock); conf->barrier++; conf->nr_waiting++; wait_event_lock_irq(conf->wait_barrier, - conf->barrier+conf->nr_pending == conf->nr_queued+2, + conf->nr_pending == conf->nr_queued+1, conf->resync_lock, - raid1_unplug(conf->mddev->queue)); + ({ flush_pending_writes(conf); + raid1_unplug(conf->mddev->queue); })); spin_unlock_irq(&conf->resync_lock); } static void unfreeze_array(conf_t *conf) @@ -907,6 +946,9 @@ static int make_request(struct request_queue *q, struct bio * bio) blk_plug_device(mddev->queue); spin_unlock_irqrestore(&conf->device_lock, flags); + /* In case raid1d snuck into freeze_array */ + wake_up(&conf->wait_barrier); + if (do_sync) md_wakeup_thread(mddev->thread); #if 0 @@ -1473,28 +1515,14 @@ static void raid1d(mddev_t *mddev) for (;;) { char b[BDEVNAME_SIZE]; - spin_lock_irqsave(&conf->device_lock, flags); - - if (conf->pending_bio_list.head) { - bio = bio_list_get(&conf->pending_bio_list); - blk_remove_plug(mddev->queue); - spin_unlock_irqrestore(&conf->device_lock, flags); - /* flush any pending bitmap writes to disk before proceeding w/ I/O */ - bitmap_unplug(mddev->bitmap); - while (bio) { /* submit pending writes */ - struct bio *next = bio->bi_next; - bio->bi_next = NULL; - generic_make_request(bio); - bio = next; - } - unplug = 1; + unplug += flush_pending_writes(conf); - continue; - } - - if (list_empty(head)) + spin_lock_irqsave(&conf->device_lock, flags); + if (list_empty(head)) { + spin_unlock_irqrestore(&conf->device_lock, flags); break; + } r1_bio = list_entry(head->prev, r1bio_t, retry_list); list_del(head->prev); conf->nr_queued--; @@ -1590,7 +1618,6 @@ static void raid1d(mddev_t *mddev) } } } - spin_unlock_irqrestore(&conf->device_lock, flags); if (unplug) unplug_slaves(mddev); } diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index 017f58113c33..32389d2f18fc 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -537,7 +537,8 @@ static int read_balance(conf_t *conf, r10bio_t *r10_bio) current_distance = abs(r10_bio->devs[slot].addr - conf->mirrors[disk].head_position); - /* Find the disk whose head is closest */ + /* Find the disk whose head is closest, + * or - for far > 1 - find the closest to partition beginning */ for (nslot = slot; nslot < conf->copies; nslot++) { int ndisk = r10_bio->devs[nslot].devnum; @@ -557,8 +558,13 @@ static int read_balance(conf_t *conf, r10bio_t *r10_bio) slot = nslot; break; } - new_distance = abs(r10_bio->devs[nslot].addr - - conf->mirrors[ndisk].head_position); + + /* for far > 1 always use the lowest address */ + if (conf->far_copies > 1) + new_distance = r10_bio->devs[nslot].addr; + else + new_distance = abs(r10_bio->devs[nslot].addr - + conf->mirrors[ndisk].head_position); if (new_distance < current_distance) { current_distance = new_distance; disk = ndisk; @@ -629,7 +635,36 @@ static int raid10_congested(void *data, int bits) return ret; } - +static int flush_pending_writes(conf_t *conf) +{ + /* Any writes that have been queued but are awaiting + * bitmap updates get flushed here. + * We return 1 if any requests were actually submitted. + */ + int rv = 0; + + spin_lock_irq(&conf->device_lock); + + if (conf->pending_bio_list.head) { + struct bio *bio; + bio = bio_list_get(&conf->pending_bio_list); + blk_remove_plug(conf->mddev->queue); + spin_unlock_irq(&conf->device_lock); + /* flush any pending bitmap writes to disk + * before proceeding w/ I/O */ + bitmap_unplug(conf->mddev->bitmap); + + while (bio) { /* submit pending writes */ + struct bio *next = bio->bi_next; + bio->bi_next = NULL; + generic_make_request(bio); + bio = next; + } + rv = 1; + } else + spin_unlock_irq(&conf->device_lock); + return rv; +} /* Barriers.... * Sometimes we need to suspend IO while we do something else, * either some resync/recovery, or reconfigure the array. @@ -712,15 +747,23 @@ static void freeze_array(conf_t *conf) /* stop syncio and normal IO and wait for everything to * go quiet. * We increment barrier and nr_waiting, and then - * wait until barrier+nr_pending match nr_queued+2 + * wait until nr_pending match nr_queued+1 + * This is called in the context of one normal IO request + * that has failed. Thus any sync request that might be pending + * will be blocked by nr_pending, and we need to wait for + * pending IO requests to complete or be queued for re-try. + * Thus the number queued (nr_queued) plus this request (1) + * must match the number of pending IOs (nr_pending) before + * we continue. */ spin_lock_irq(&conf->resync_lock); conf->barrier++; conf->nr_waiting++; wait_event_lock_irq(conf->wait_barrier, - conf->barrier+conf->nr_pending == conf->nr_queued+2, + conf->nr_pending == conf->nr_queued+1, conf->resync_lock, - raid10_unplug(conf->mddev->queue)); + ({ flush_pending_writes(conf); + raid10_unplug(conf->mddev->queue); })); spin_unlock_irq(&conf->resync_lock); } @@ -892,6 +935,9 @@ static int make_request(struct request_queue *q, struct bio * bio) blk_plug_device(mddev->queue); spin_unlock_irqrestore(&conf->device_lock, flags); + /* In case raid10d snuck in to freeze_array */ + wake_up(&conf->wait_barrier); + if (do_sync) md_wakeup_thread(mddev->thread); @@ -1464,28 +1510,14 @@ static void raid10d(mddev_t *mddev) for (;;) { char b[BDEVNAME_SIZE]; - spin_lock_irqsave(&conf->device_lock, flags); - if (conf->pending_bio_list.head) { - bio = bio_list_get(&conf->pending_bio_list); - blk_remove_plug(mddev->queue); - spin_unlock_irqrestore(&conf->device_lock, flags); - /* flush any pending bitmap writes to disk before proceeding w/ I/O */ - bitmap_unplug(mddev->bitmap); - - while (bio) { /* submit pending writes */ - struct bio *next = bio->bi_next; - bio->bi_next = NULL; - generic_make_request(bio); - bio = next; - } - unplug = 1; - - continue; - } + unplug += flush_pending_writes(conf); - if (list_empty(head)) + spin_lock_irqsave(&conf->device_lock, flags); + if (list_empty(head)) { + spin_unlock_irqrestore(&conf->device_lock, flags); break; + } r10_bio = list_entry(head->prev, r10bio_t, retry_list); list_del(head->prev); conf->nr_queued--; @@ -1548,7 +1580,6 @@ static void raid10d(mddev_t *mddev) } } } - spin_unlock_irqrestore(&conf->device_lock, flags); if (unplug) unplug_slaves(mddev); } @@ -1787,6 +1818,8 @@ static sector_t sync_request(mddev_t *mddev, sector_t sector_nr, int *skipped, i if (j == conf->copies) { /* Cannot recover, so abort the recovery */ put_buf(r10_bio); + if (rb2) + atomic_dec(&rb2->remaining); r10_bio = rb2; if (!test_and_set_bit(MD_RECOVERY_ERR, &mddev->recovery)) printk(KERN_INFO "raid10: %s: insufficient working devices for recovery.\n", diff --git a/drivers/memstick/Kconfig b/drivers/memstick/Kconfig index 1093fdb07297..f0ca41c20323 100644 --- a/drivers/memstick/Kconfig +++ b/drivers/memstick/Kconfig @@ -8,7 +8,7 @@ menuconfig MEMSTICK Sony MemoryStick is a proprietary storage/extension card protocol. If you want MemoryStick support, you should say Y here and also - to the specific driver for your MMC interface. + to the specific driver for your MemoryStick interface. if MEMSTICK diff --git a/drivers/memstick/core/memstick.c b/drivers/memstick/core/memstick.c index bba467fe4bce..de80dba12f9b 100644 --- a/drivers/memstick/core/memstick.c +++ b/drivers/memstick/core/memstick.c @@ -18,7 +18,6 @@ #include <linux/delay.h> #define DRIVER_NAME "memstick" -#define DRIVER_VERSION "0.2" static unsigned int cmd_retries = 3; module_param(cmd_retries, uint, 0644); @@ -236,7 +235,7 @@ int memstick_next_req(struct memstick_host *host, struct memstick_request **mrq) rc = host->card->next_request(host->card, mrq); if (!rc) - host->retries = cmd_retries; + host->retries = cmd_retries > 1 ? cmd_retries - 1 : 1; else *mrq = NULL; @@ -271,7 +270,7 @@ void memstick_init_req_sg(struct memstick_request *mrq, unsigned char tpc, mrq->data_dir = READ; mrq->sg = *sg; - mrq->io_type = MEMSTICK_IO_SG; + mrq->long_data = 1; if (tpc == MS_TPC_SET_CMD || tpc == MS_TPC_EX_SET_CMD) mrq->need_card_int = 1; @@ -306,7 +305,7 @@ void memstick_init_req(struct memstick_request *mrq, unsigned char tpc, if (mrq->data_dir == WRITE) memcpy(mrq->data, buf, mrq->data_len); - mrq->io_type = MEMSTICK_IO_VAL; + mrq->long_data = 0; if (tpc == MS_TPC_SET_CMD || tpc == MS_TPC_EX_SET_CMD) mrq->need_card_int = 1; @@ -561,6 +560,31 @@ void memstick_free_host(struct memstick_host *host) } EXPORT_SYMBOL(memstick_free_host); +/** + * memstick_suspend_host - notify bus driver of host suspension + * @host - host to use + */ +void memstick_suspend_host(struct memstick_host *host) +{ + mutex_lock(&host->lock); + host->set_param(host, MEMSTICK_POWER, MEMSTICK_POWER_OFF); + mutex_unlock(&host->lock); +} +EXPORT_SYMBOL(memstick_suspend_host); + +/** + * memstick_resume_host - notify bus driver of host resumption + * @host - host to use + */ +void memstick_resume_host(struct memstick_host *host) +{ + mutex_lock(&host->lock); + host->set_param(host, MEMSTICK_POWER, MEMSTICK_POWER_ON); + mutex_unlock(&host->lock); + memstick_detect_change(host); +} +EXPORT_SYMBOL(memstick_resume_host); + int memstick_register_driver(struct memstick_driver *drv) { drv->driver.bus = &memstick_bus_type; @@ -611,4 +635,3 @@ module_exit(memstick_exit); MODULE_AUTHOR("Alex Dubov"); MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("Sony MemoryStick core driver"); -MODULE_VERSION(DRIVER_VERSION); diff --git a/drivers/memstick/core/mspro_block.c b/drivers/memstick/core/mspro_block.c index 423ad8cf4bb9..1d637e4561d3 100644 --- a/drivers/memstick/core/mspro_block.c +++ b/drivers/memstick/core/mspro_block.c @@ -16,10 +16,10 @@ #include <linux/idr.h> #include <linux/hdreg.h> #include <linux/kthread.h> +#include <linux/delay.h> #include <linux/memstick.h> #define DRIVER_NAME "mspro_block" -#define DRIVER_VERSION "0.2" static int major; module_param(major, int, 0644); @@ -110,6 +110,17 @@ struct mspro_mbr { unsigned int sectors_per_partition; } __attribute__((packed)); +struct mspro_specfile { + char name[8]; + char ext[3]; + unsigned char attr; + unsigned char reserved[10]; + unsigned short time; + unsigned short date; + unsigned short cluster; + unsigned int size; +} __attribute__((packed)); + struct mspro_devinfo { unsigned short cylinders; unsigned short heads; @@ -293,6 +304,20 @@ static ssize_t mspro_block_attr_show_sysinfo(struct device *dev, dev_attr); struct mspro_sys_info *x_sys = x_attr->data; ssize_t rc = 0; + int date_tz = 0, date_tz_f = 0; + + if (x_sys->assembly_date[0] > 0x80U) { + date_tz = (~x_sys->assembly_date[0]) + 1; + date_tz_f = date_tz & 3; + date_tz >>= 2; + date_tz = -date_tz; + date_tz_f *= 15; + } else if (x_sys->assembly_date[0] < 0x80U) { + date_tz = x_sys->assembly_date[0]; + date_tz_f = date_tz & 3; + date_tz >>= 2; + date_tz_f *= 15; + } rc += scnprintf(buffer + rc, PAGE_SIZE - rc, "class: %x\n", x_sys->class); @@ -305,8 +330,8 @@ static ssize_t mspro_block_attr_show_sysinfo(struct device *dev, rc += scnprintf(buffer + rc, PAGE_SIZE - rc, "page size: %x\n", be16_to_cpu(x_sys->page_size)); rc += scnprintf(buffer + rc, PAGE_SIZE - rc, "assembly date: " - "%d %04u-%02u-%02u %02u:%02u:%02u\n", - x_sys->assembly_date[0], + "GMT%+d:%d %04u-%02u-%02u %02u:%02u:%02u\n", + date_tz, date_tz_f, be16_to_cpu(*(unsigned short *) &x_sys->assembly_date[1]), x_sys->assembly_date[3], x_sys->assembly_date[4], @@ -398,6 +423,41 @@ static ssize_t mspro_block_attr_show_mbr(struct device *dev, return rc; } +static ssize_t mspro_block_attr_show_specfile(struct device *dev, + struct device_attribute *attr, + char *buffer) +{ + struct mspro_sys_attr *x_attr = container_of(attr, + struct mspro_sys_attr, + dev_attr); + struct mspro_specfile *x_spfile = x_attr->data; + char name[9], ext[4]; + ssize_t rc = 0; + + memcpy(name, x_spfile->name, 8); + name[8] = 0; + memcpy(ext, x_spfile->ext, 3); + ext[3] = 0; + + rc += scnprintf(buffer + rc, PAGE_SIZE - rc, "name: %s\n", name); + rc += scnprintf(buffer + rc, PAGE_SIZE - rc, "ext: %s\n", ext); + rc += scnprintf(buffer + rc, PAGE_SIZE - rc, "attribute: %x\n", + x_spfile->attr); + rc += scnprintf(buffer + rc, PAGE_SIZE - rc, "time: %d:%d:%d\n", + x_spfile->time >> 11, + (x_spfile->time >> 5) & 0x3f, + (x_spfile->time & 0x1f) * 2); + rc += scnprintf(buffer + rc, PAGE_SIZE - rc, "date: %d-%d-%d\n", + (x_spfile->date >> 9) + 1980, + (x_spfile->date >> 5) & 0xf, + x_spfile->date & 0x1f); + rc += scnprintf(buffer + rc, PAGE_SIZE - rc, "start cluster: %x\n", + x_spfile->cluster); + rc += scnprintf(buffer + rc, PAGE_SIZE - rc, "size: %x\n", + x_spfile->size); + return rc; +} + static ssize_t mspro_block_attr_show_devinfo(struct device *dev, struct device_attribute *attr, char *buffer) @@ -430,6 +490,9 @@ static sysfs_show_t mspro_block_attr_show(unsigned char tag) return mspro_block_attr_show_modelname; case MSPRO_BLOCK_ID_MBR: return mspro_block_attr_show_mbr; + case MSPRO_BLOCK_ID_SPECFILEVALUES1: + case MSPRO_BLOCK_ID_SPECFILEVALUES2: + return mspro_block_attr_show_specfile; case MSPRO_BLOCK_ID_DEVINFO: return mspro_block_attr_show_devinfo; default: @@ -629,7 +692,7 @@ static void mspro_block_process_request(struct memstick_dev *card, param.system = msb->system; param.data_count = cpu_to_be16(page_count); param.data_address = cpu_to_be32((uint32_t)t_sec); - param.cmd_param = 0; + param.tpc_param = 0; msb->data_dir = rq_data_dir(req); msb->transfer_cmd = msb->data_dir == READ @@ -758,10 +821,10 @@ static int mspro_block_switch_to_parallel(struct memstick_dev *card) struct memstick_host *host = card->host; struct mspro_block_data *msb = memstick_get_drvdata(card); struct mspro_param_register param = { - .system = 0, + .system = MEMSTICK_SYS_PAR4, .data_count = 0, .data_address = 0, - .cmd_param = 0 + .tpc_param = 0 }; card->next_request = h_mspro_block_req_init; @@ -773,8 +836,8 @@ static int mspro_block_switch_to_parallel(struct memstick_dev *card) if (card->current_mrq.error) return card->current_mrq.error; - msb->system = 0; - host->set_param(host, MEMSTICK_INTERFACE, MEMSTICK_PARALLEL); + msb->system = MEMSTICK_SYS_PAR4; + host->set_param(host, MEMSTICK_INTERFACE, MEMSTICK_PAR4); card->next_request = h_mspro_block_req_init; msb->mrq_handler = h_mspro_block_default; @@ -783,8 +846,24 @@ static int mspro_block_switch_to_parallel(struct memstick_dev *card) wait_for_completion(&card->mrq_complete); if (card->current_mrq.error) { - msb->system = 0x80; + msb->system = MEMSTICK_SYS_SERIAL; + host->set_param(host, MEMSTICK_POWER, MEMSTICK_POWER_OFF); + msleep(1000); + host->set_param(host, MEMSTICK_POWER, MEMSTICK_POWER_ON); host->set_param(host, MEMSTICK_INTERFACE, MEMSTICK_SERIAL); + + if (memstick_set_rw_addr(card)) + return card->current_mrq.error; + + param.system = msb->system; + + card->next_request = h_mspro_block_req_init; + msb->mrq_handler = h_mspro_block_default; + memstick_init_req(&card->current_mrq, MS_TPC_WRITE_REG, ¶m, + sizeof(param)); + memstick_new_req(host); + wait_for_completion(&card->mrq_complete); + return -EFAULT; } @@ -802,7 +881,7 @@ static int mspro_block_read_attributes(struct memstick_dev *card) .system = msb->system, .data_count = cpu_to_be16(1), .data_address = 0, - .cmd_param = 0 + .tpc_param = 0 }; struct mspro_attribute *attr = NULL; struct mspro_sys_attr *s_attr = NULL; @@ -922,7 +1001,7 @@ static int mspro_block_read_attributes(struct memstick_dev *card) param.system = msb->system; param.data_count = cpu_to_be16((rc / msb->page_size) + 1); param.data_address = cpu_to_be32(addr / msb->page_size); - param.cmd_param = 0; + param.tpc_param = 0; sg_init_one(&msb->req_sg[0], buffer, be16_to_cpu(param.data_count) * msb->page_size); @@ -964,7 +1043,7 @@ static int mspro_block_init_card(struct memstick_dev *card) struct memstick_host *host = card->host; int rc = 0; - msb->system = 0x80; + msb->system = MEMSTICK_SYS_SERIAL; card->reg_addr.r_offset = offsetof(struct mspro_register, status); card->reg_addr.r_length = sizeof(struct ms_status_register); card->reg_addr.w_offset = offsetof(struct mspro_register, param); @@ -973,7 +1052,7 @@ static int mspro_block_init_card(struct memstick_dev *card) if (memstick_set_rw_addr(card)) return -EIO; - if (host->caps & MEMSTICK_CAP_PARALLEL) { + if (host->caps & MEMSTICK_CAP_PAR4) { if (mspro_block_switch_to_parallel(card)) printk(KERN_WARNING "%s: could not switch to " "parallel interface\n", card->dev.bus_id); @@ -1348,4 +1427,3 @@ MODULE_LICENSE("GPL"); MODULE_AUTHOR("Alex Dubov"); MODULE_DESCRIPTION("Sony MemoryStickPro block device driver"); MODULE_DEVICE_TABLE(memstick, mspro_block_id_tbl); -MODULE_VERSION(DRIVER_VERSION); diff --git a/drivers/memstick/host/Kconfig b/drivers/memstick/host/Kconfig index c002fcc3c879..4ce5c8dffb68 100644 --- a/drivers/memstick/host/Kconfig +++ b/drivers/memstick/host/Kconfig @@ -20,3 +20,13 @@ config MEMSTICK_TIFM_MS To compile this driver as a module, choose M here: the module will be called tifm_ms. +config MEMSTICK_JMICRON_38X + tristate "JMicron JMB38X MemoryStick interface support (EXPERIMENTAL)" + depends on EXPERIMENTAL && PCI + + help + Say Y here if you want to be able to access MemoryStick cards with + the JMicron(R) JMB38X MemoryStick card reader. + + To compile this driver as a module, choose M here: the + module will be called jmb38x_ms. diff --git a/drivers/memstick/host/Makefile b/drivers/memstick/host/Makefile index ee666380efa1..12530e4311d3 100644 --- a/drivers/memstick/host/Makefile +++ b/drivers/memstick/host/Makefile @@ -3,8 +3,8 @@ # ifeq ($(CONFIG_MEMSTICK_DEBUG),y) - EXTRA_CFLAGS += -DDEBUG + EXTRA_CFLAGS += -DDEBUG endif -obj-$(CONFIG_MEMSTICK_TIFM_MS) += tifm_ms.o - +obj-$(CONFIG_MEMSTICK_TIFM_MS) += tifm_ms.o +obj-$(CONFIG_MEMSTICK_JMICRON_38X) += jmb38x_ms.o diff --git a/drivers/memstick/host/jmb38x_ms.c b/drivers/memstick/host/jmb38x_ms.c new file mode 100644 index 000000000000..03fe8783b1ee --- /dev/null +++ b/drivers/memstick/host/jmb38x_ms.c @@ -0,0 +1,945 @@ +/* + * jmb38x_ms.c - JMicron jmb38x MemoryStick card reader + * + * Copyright (C) 2008 Alex Dubov <oakad@yahoo.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/spinlock.h> +#include <linux/interrupt.h> +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/highmem.h> +#include <linux/memstick.h> + +#define DRIVER_NAME "jmb38x_ms" + +static int no_dma; +module_param(no_dma, bool, 0644); + +enum { + DMA_ADDRESS = 0x00, + BLOCK = 0x04, + DMA_CONTROL = 0x08, + TPC_P0 = 0x0c, + TPC_P1 = 0x10, + TPC = 0x14, + HOST_CONTROL = 0x18, + DATA = 0x1c, + STATUS = 0x20, + INT_STATUS = 0x24, + INT_STATUS_ENABLE = 0x28, + INT_SIGNAL_ENABLE = 0x2c, + TIMER = 0x30, + TIMER_CONTROL = 0x34, + PAD_OUTPUT_ENABLE = 0x38, + PAD_PU_PD = 0x3c, + CLOCK_DELAY = 0x40, + ADMA_ADDRESS = 0x44, + CLOCK_CONTROL = 0x48, + LED_CONTROL = 0x4c, + VERSION = 0x50 +}; + +struct jmb38x_ms_host { + struct jmb38x_ms *chip; + void __iomem *addr; + spinlock_t lock; + int id; + char host_id[DEVICE_ID_SIZE]; + int irq; + unsigned int block_pos; + unsigned long timeout_jiffies; + struct timer_list timer; + struct memstick_request *req; + unsigned char eject:1, + use_dma:1; + unsigned char cmd_flags; + unsigned char io_pos; + unsigned int io_word[2]; +}; + +struct jmb38x_ms { + struct pci_dev *pdev; + int host_cnt; + struct memstick_host *hosts[]; +}; + +#define BLOCK_COUNT_MASK 0xffff0000 +#define BLOCK_SIZE_MASK 0x00000fff + +#define DMA_CONTROL_ENABLE 0x00000001 + +#define TPC_DATA_SEL 0x00008000 +#define TPC_DIR 0x00004000 +#define TPC_WAIT_INT 0x00002000 +#define TPC_GET_INT 0x00000800 +#define TPC_CODE_SZ_MASK 0x00000700 +#define TPC_DATA_SZ_MASK 0x00000007 + +#define HOST_CONTROL_RESET_REQ 0x00008000 +#define HOST_CONTROL_REI 0x00004000 +#define HOST_CONTROL_LED 0x00000400 +#define HOST_CONTROL_FAST_CLK 0x00000200 +#define HOST_CONTROL_RESET 0x00000100 +#define HOST_CONTROL_POWER_EN 0x00000080 +#define HOST_CONTROL_CLOCK_EN 0x00000040 +#define HOST_CONTROL_IF_SHIFT 4 + +#define HOST_CONTROL_IF_SERIAL 0x0 +#define HOST_CONTROL_IF_PAR4 0x1 +#define HOST_CONTROL_IF_PAR8 0x3 + +#define STATUS_HAS_MEDIA 0x00000400 +#define STATUS_FIFO_EMPTY 0x00000200 +#define STATUS_FIFO_FULL 0x00000100 + +#define INT_STATUS_TPC_ERR 0x00080000 +#define INT_STATUS_CRC_ERR 0x00040000 +#define INT_STATUS_TIMER_TO 0x00020000 +#define INT_STATUS_HSK_TO 0x00010000 +#define INT_STATUS_ANY_ERR 0x00008000 +#define INT_STATUS_FIFO_WRDY 0x00000080 +#define INT_STATUS_FIFO_RRDY 0x00000040 +#define INT_STATUS_MEDIA_OUT 0x00000010 +#define INT_STATUS_MEDIA_IN 0x00000008 +#define INT_STATUS_DMA_BOUNDARY 0x00000004 +#define INT_STATUS_EOTRAN 0x00000002 +#define INT_STATUS_EOTPC 0x00000001 + +#define INT_STATUS_ALL 0x000f801f + +#define PAD_OUTPUT_ENABLE_MS 0x0F3F + +#define PAD_PU_PD_OFF 0x7FFF0000 +#define PAD_PU_PD_ON_MS_SOCK0 0x5f8f0000 +#define PAD_PU_PD_ON_MS_SOCK1 0x0f0f0000 + +enum { + CMD_READY = 0x01, + FIFO_READY = 0x02, + REG_DATA = 0x04, + AUTO_GET_INT = 0x08 +}; + +static unsigned int jmb38x_ms_read_data(struct jmb38x_ms_host *host, + unsigned char *buf, unsigned int length) +{ + unsigned int off = 0; + + while (host->io_pos && length) { + buf[off++] = host->io_word[0] & 0xff; + host->io_word[0] >>= 8; + length--; + host->io_pos--; + } + + if (!length) + return off; + + while (!(STATUS_FIFO_EMPTY & readl(host->addr + STATUS))) { + if (length < 4) + break; + *(unsigned int *)(buf + off) = __raw_readl(host->addr + DATA); + length -= 4; + off += 4; + } + + if (length + && !(STATUS_FIFO_EMPTY & readl(host->addr + STATUS))) { + host->io_word[0] = readl(host->addr + DATA); + for (host->io_pos = 4; host->io_pos; --host->io_pos) { + buf[off++] = host->io_word[0] & 0xff; + host->io_word[0] >>= 8; + length--; + if (!length) + break; + } + } + + return off; +} + +static unsigned int jmb38x_ms_read_reg_data(struct jmb38x_ms_host *host, + unsigned char *buf, + unsigned int length) +{ + unsigned int off = 0; + + while (host->io_pos > 4 && length) { + buf[off++] = host->io_word[0] & 0xff; + host->io_word[0] >>= 8; + length--; + host->io_pos--; + } + + if (!length) + return off; + + while (host->io_pos && length) { + buf[off++] = host->io_word[1] & 0xff; + host->io_word[1] >>= 8; + length--; + host->io_pos--; + } + + return off; +} + +static unsigned int jmb38x_ms_write_data(struct jmb38x_ms_host *host, + unsigned char *buf, + unsigned int length) +{ + unsigned int off = 0; + + if (host->io_pos) { + while (host->io_pos < 4 && length) { + host->io_word[0] |= buf[off++] << (host->io_pos * 8); + host->io_pos++; + length--; + } + } + + if (host->io_pos == 4 + && !(STATUS_FIFO_FULL & readl(host->addr + STATUS))) { + writel(host->io_word[0], host->addr + DATA); + host->io_pos = 0; + host->io_word[0] = 0; + } else if (host->io_pos) { + return off; + } + + if (!length) + return off; + + while (!(STATUS_FIFO_FULL & readl(host->addr + STATUS))) { + if (length < 4) + break; + + __raw_writel(*(unsigned int *)(buf + off), + host->addr + DATA); + length -= 4; + off += 4; + } + + switch (length) { + case 3: + host->io_word[0] |= buf[off + 2] << 16; + host->io_pos++; + case 2: + host->io_word[0] |= buf[off + 1] << 8; + host->io_pos++; + case 1: + host->io_word[0] |= buf[off]; + host->io_pos++; + } + + off += host->io_pos; + + return off; +} + +static unsigned int jmb38x_ms_write_reg_data(struct jmb38x_ms_host *host, + unsigned char *buf, + unsigned int length) +{ + unsigned int off = 0; + + while (host->io_pos < 4 && length) { + host->io_word[0] &= ~(0xff << (host->io_pos * 8)); + host->io_word[0] |= buf[off++] << (host->io_pos * 8); + host->io_pos++; + length--; + } + + if (!length) + return off; + + while (host->io_pos < 8 && length) { + host->io_word[1] &= ~(0xff << (host->io_pos * 8)); + host->io_word[1] |= buf[off++] << (host->io_pos * 8); + host->io_pos++; + length--; + } + + return off; +} + +static int jmb38x_ms_transfer_data(struct jmb38x_ms_host *host) +{ + unsigned int length; + unsigned int off; + unsigned int t_size, p_off, p_cnt; + unsigned char *buf; + struct page *pg; + unsigned long flags = 0; + + if (host->req->long_data) { + length = host->req->sg.length - host->block_pos; + off = host->req->sg.offset + host->block_pos; + } else { + length = host->req->data_len - host->block_pos; + off = 0; + } + + while (length) { + if (host->req->long_data) { + pg = nth_page(sg_page(&host->req->sg), + off >> PAGE_SHIFT); + p_off = offset_in_page(off); + p_cnt = PAGE_SIZE - p_off; + p_cnt = min(p_cnt, length); + + local_irq_save(flags); + buf = kmap_atomic(pg, KM_BIO_SRC_IRQ) + p_off; + } else { + buf = host->req->data + host->block_pos; + p_cnt = host->req->data_len - host->block_pos; + } + + if (host->req->data_dir == WRITE) + t_size = !(host->cmd_flags & REG_DATA) + ? jmb38x_ms_write_data(host, buf, p_cnt) + : jmb38x_ms_write_reg_data(host, buf, p_cnt); + else + t_size = !(host->cmd_flags & REG_DATA) + ? jmb38x_ms_read_data(host, buf, p_cnt) + : jmb38x_ms_read_reg_data(host, buf, p_cnt); + + if (host->req->long_data) { + kunmap_atomic(buf - p_off, KM_BIO_SRC_IRQ); + local_irq_restore(flags); + } + + if (!t_size) + break; + host->block_pos += t_size; + length -= t_size; + off += t_size; + } + + if (!length && host->req->data_dir == WRITE) { + if (host->cmd_flags & REG_DATA) { + writel(host->io_word[0], host->addr + TPC_P0); + writel(host->io_word[1], host->addr + TPC_P1); + } else if (host->io_pos) { + writel(host->io_word[0], host->addr + DATA); + } + } + + return length; +} + +static int jmb38x_ms_issue_cmd(struct memstick_host *msh) +{ + struct jmb38x_ms_host *host = memstick_priv(msh); + unsigned char *data; + unsigned int data_len, cmd, t_val; + + if (!(STATUS_HAS_MEDIA & readl(host->addr + STATUS))) { + dev_dbg(msh->cdev.dev, "no media status\n"); + host->req->error = -ETIME; + return host->req->error; + } + + dev_dbg(msh->cdev.dev, "control %08x\n", + readl(host->addr + HOST_CONTROL)); + dev_dbg(msh->cdev.dev, "status %08x\n", readl(host->addr + INT_STATUS)); + dev_dbg(msh->cdev.dev, "hstatus %08x\n", readl(host->addr + STATUS)); + + host->cmd_flags = 0; + host->block_pos = 0; + host->io_pos = 0; + host->io_word[0] = 0; + host->io_word[1] = 0; + + cmd = host->req->tpc << 16; + cmd |= TPC_DATA_SEL; + + if (host->req->data_dir == READ) + cmd |= TPC_DIR; + if (host->req->need_card_int) + cmd |= TPC_WAIT_INT; + if (host->req->get_int_reg) + cmd |= TPC_GET_INT; + + data = host->req->data; + + host->use_dma = !no_dma; + + if (host->req->long_data) { + data_len = host->req->sg.length; + } else { + data_len = host->req->data_len; + host->use_dma = 0; + } + + if (data_len <= 8) { + cmd &= ~(TPC_DATA_SEL | 0xf); + host->cmd_flags |= REG_DATA; + cmd |= data_len & 0xf; + host->use_dma = 0; + } + + if (host->use_dma) { + if (1 != pci_map_sg(host->chip->pdev, &host->req->sg, 1, + host->req->data_dir == READ + ? PCI_DMA_FROMDEVICE + : PCI_DMA_TODEVICE)) { + host->req->error = -ENOMEM; + return host->req->error; + } + data_len = sg_dma_len(&host->req->sg); + writel(sg_dma_address(&host->req->sg), + host->addr + DMA_ADDRESS); + writel(((1 << 16) & BLOCK_COUNT_MASK) + | (data_len & BLOCK_SIZE_MASK), + host->addr + BLOCK); + writel(DMA_CONTROL_ENABLE, host->addr + DMA_CONTROL); + } else if (!(host->cmd_flags & REG_DATA)) { + writel(((1 << 16) & BLOCK_COUNT_MASK) + | (data_len & BLOCK_SIZE_MASK), + host->addr + BLOCK); + t_val = readl(host->addr + INT_STATUS_ENABLE); + t_val |= host->req->data_dir == READ + ? INT_STATUS_FIFO_RRDY + : INT_STATUS_FIFO_WRDY; + + writel(t_val, host->addr + INT_STATUS_ENABLE); + writel(t_val, host->addr + INT_SIGNAL_ENABLE); + } else { + cmd &= ~(TPC_DATA_SEL | 0xf); + host->cmd_flags |= REG_DATA; + cmd |= data_len & 0xf; + + if (host->req->data_dir == WRITE) { + jmb38x_ms_transfer_data(host); + writel(host->io_word[0], host->addr + TPC_P0); + writel(host->io_word[1], host->addr + TPC_P1); + } + } + + mod_timer(&host->timer, jiffies + host->timeout_jiffies); + writel(HOST_CONTROL_LED | readl(host->addr + HOST_CONTROL), + host->addr + HOST_CONTROL); + host->req->error = 0; + + writel(cmd, host->addr + TPC); + dev_dbg(msh->cdev.dev, "executing TPC %08x, len %x\n", cmd, data_len); + + return 0; +} + +static void jmb38x_ms_complete_cmd(struct memstick_host *msh, int last) +{ + struct jmb38x_ms_host *host = memstick_priv(msh); + unsigned int t_val = 0; + int rc; + + del_timer(&host->timer); + + dev_dbg(msh->cdev.dev, "c control %08x\n", + readl(host->addr + HOST_CONTROL)); + dev_dbg(msh->cdev.dev, "c status %08x\n", + readl(host->addr + INT_STATUS)); + dev_dbg(msh->cdev.dev, "c hstatus %08x\n", readl(host->addr + STATUS)); + + if (host->req->get_int_reg) { + t_val = readl(host->addr + TPC_P0); + host->req->int_reg = (t_val & 0xff); + } + + if (host->use_dma) { + writel(0, host->addr + DMA_CONTROL); + pci_unmap_sg(host->chip->pdev, &host->req->sg, 1, + host->req->data_dir == READ + ? PCI_DMA_FROMDEVICE : PCI_DMA_TODEVICE); + } else { + t_val = readl(host->addr + INT_STATUS_ENABLE); + if (host->req->data_dir == READ) + t_val &= ~INT_STATUS_FIFO_RRDY; + else + t_val &= ~INT_STATUS_FIFO_WRDY; + + writel(t_val, host->addr + INT_STATUS_ENABLE); + writel(t_val, host->addr + INT_SIGNAL_ENABLE); + } + + writel((~HOST_CONTROL_LED) & readl(host->addr + HOST_CONTROL), + host->addr + HOST_CONTROL); + + if (!last) { + do { + rc = memstick_next_req(msh, &host->req); + } while (!rc && jmb38x_ms_issue_cmd(msh)); + } else { + do { + rc = memstick_next_req(msh, &host->req); + if (!rc) + host->req->error = -ETIME; + } while (!rc); + } +} + +static irqreturn_t jmb38x_ms_isr(int irq, void *dev_id) +{ + struct memstick_host *msh = dev_id; + struct jmb38x_ms_host *host = memstick_priv(msh); + unsigned int irq_status; + + spin_lock(&host->lock); + irq_status = readl(host->addr + INT_STATUS); + dev_dbg(&host->chip->pdev->dev, "irq_status = %08x\n", irq_status); + if (irq_status == 0 || irq_status == (~0)) { + spin_unlock(&host->lock); + return IRQ_NONE; + } + + if (host->req) { + if (irq_status & INT_STATUS_ANY_ERR) { + if (irq_status & INT_STATUS_CRC_ERR) + host->req->error = -EILSEQ; + else + host->req->error = -ETIME; + } else { + if (host->use_dma) { + if (irq_status & INT_STATUS_EOTRAN) + host->cmd_flags |= FIFO_READY; + } else { + if (irq_status & (INT_STATUS_FIFO_RRDY + | INT_STATUS_FIFO_WRDY)) + jmb38x_ms_transfer_data(host); + + if (irq_status & INT_STATUS_EOTRAN) { + jmb38x_ms_transfer_data(host); + host->cmd_flags |= FIFO_READY; + } + } + + if (irq_status & INT_STATUS_EOTPC) { + host->cmd_flags |= CMD_READY; + if (host->cmd_flags & REG_DATA) { + if (host->req->data_dir == READ) { + host->io_word[0] + = readl(host->addr + + TPC_P0); + host->io_word[1] + = readl(host->addr + + TPC_P1); + host->io_pos = 8; + + jmb38x_ms_transfer_data(host); + } + host->cmd_flags |= FIFO_READY; + } + } + } + } + + if (irq_status & (INT_STATUS_MEDIA_IN | INT_STATUS_MEDIA_OUT)) { + dev_dbg(&host->chip->pdev->dev, "media changed\n"); + memstick_detect_change(msh); + } + + writel(irq_status, host->addr + INT_STATUS); + + if (host->req + && (((host->cmd_flags & CMD_READY) + && (host->cmd_flags & FIFO_READY)) + || host->req->error)) + jmb38x_ms_complete_cmd(msh, 0); + + spin_unlock(&host->lock); + return IRQ_HANDLED; +} + +static void jmb38x_ms_abort(unsigned long data) +{ + struct memstick_host *msh = (struct memstick_host *)data; + struct jmb38x_ms_host *host = memstick_priv(msh); + unsigned long flags; + + dev_dbg(&host->chip->pdev->dev, "abort\n"); + spin_lock_irqsave(&host->lock, flags); + if (host->req) { + host->req->error = -ETIME; + jmb38x_ms_complete_cmd(msh, 0); + } + spin_unlock_irqrestore(&host->lock, flags); +} + +static void jmb38x_ms_request(struct memstick_host *msh) +{ + struct jmb38x_ms_host *host = memstick_priv(msh); + unsigned long flags; + int rc; + + spin_lock_irqsave(&host->lock, flags); + if (host->req) { + spin_unlock_irqrestore(&host->lock, flags); + BUG(); + return; + } + + do { + rc = memstick_next_req(msh, &host->req); + } while (!rc && jmb38x_ms_issue_cmd(msh)); + spin_unlock_irqrestore(&host->lock, flags); +} + +static void jmb38x_ms_reset(struct jmb38x_ms_host *host) +{ + unsigned int host_ctl = readl(host->addr + HOST_CONTROL); + + writel(host_ctl | HOST_CONTROL_RESET_REQ | HOST_CONTROL_RESET, + host->addr + HOST_CONTROL); + + while (HOST_CONTROL_RESET_REQ + & (host_ctl = readl(host->addr + HOST_CONTROL))) { + ndelay(100); + dev_dbg(&host->chip->pdev->dev, "reset\n"); + } + + writel(INT_STATUS_ALL, host->addr + INT_STATUS_ENABLE); + writel(INT_STATUS_ALL, host->addr + INT_SIGNAL_ENABLE); + + dev_dbg(&host->chip->pdev->dev, "reset\n"); +} + +static void jmb38x_ms_set_param(struct memstick_host *msh, + enum memstick_param param, + int value) +{ + struct jmb38x_ms_host *host = memstick_priv(msh); + unsigned int host_ctl; + unsigned long flags; + + spin_lock_irqsave(&host->lock, flags); + + switch (param) { + case MEMSTICK_POWER: + if (value == MEMSTICK_POWER_ON) { + jmb38x_ms_reset(host); + + writel(host->id ? PAD_PU_PD_ON_MS_SOCK1 + : PAD_PU_PD_ON_MS_SOCK0, + host->addr + PAD_PU_PD); + + writel(PAD_OUTPUT_ENABLE_MS, + host->addr + PAD_OUTPUT_ENABLE); + + host_ctl = readl(host->addr + HOST_CONTROL); + host_ctl |= 7; + writel(host_ctl | (HOST_CONTROL_POWER_EN + | HOST_CONTROL_CLOCK_EN), + host->addr + HOST_CONTROL); + + dev_dbg(&host->chip->pdev->dev, "power on\n"); + } else if (value == MEMSTICK_POWER_OFF) { + writel(readl(host->addr + HOST_CONTROL) + & ~(HOST_CONTROL_POWER_EN + | HOST_CONTROL_CLOCK_EN), + host->addr + HOST_CONTROL); + writel(0, host->addr + PAD_OUTPUT_ENABLE); + writel(PAD_PU_PD_OFF, host->addr + PAD_PU_PD); + dev_dbg(&host->chip->pdev->dev, "power off\n"); + } + break; + case MEMSTICK_INTERFACE: + /* jmb38x_ms_reset(host); */ + + host_ctl = readl(host->addr + HOST_CONTROL); + host_ctl &= ~(3 << HOST_CONTROL_IF_SHIFT); + /* host_ctl |= 7; */ + + if (value == MEMSTICK_SERIAL) { + host_ctl &= ~HOST_CONTROL_FAST_CLK; + host_ctl |= HOST_CONTROL_IF_SERIAL + << HOST_CONTROL_IF_SHIFT; + host_ctl |= HOST_CONTROL_REI; + writel(0, host->addr + CLOCK_DELAY); + } else if (value == MEMSTICK_PAR4) { + host_ctl |= HOST_CONTROL_FAST_CLK; + host_ctl |= HOST_CONTROL_IF_PAR4 + << HOST_CONTROL_IF_SHIFT; + host_ctl &= ~HOST_CONTROL_REI; + writel(4, host->addr + CLOCK_DELAY); + } else if (value == MEMSTICK_PAR8) { + host_ctl |= HOST_CONTROL_FAST_CLK; + host_ctl |= HOST_CONTROL_IF_PAR8 + << HOST_CONTROL_IF_SHIFT; + host_ctl &= ~HOST_CONTROL_REI; + writel(4, host->addr + CLOCK_DELAY); + } + writel(host_ctl, host->addr + HOST_CONTROL); + break; + }; + + spin_unlock_irqrestore(&host->lock, flags); +} + +#ifdef CONFIG_PM + +static int jmb38x_ms_suspend(struct pci_dev *dev, pm_message_t state) +{ + struct jmb38x_ms *jm = pci_get_drvdata(dev); + int cnt; + + for (cnt = 0; cnt < jm->host_cnt; ++cnt) { + if (!jm->hosts[cnt]) + break; + memstick_suspend_host(jm->hosts[cnt]); + } + + pci_save_state(dev); + pci_enable_wake(dev, pci_choose_state(dev, state), 0); + pci_disable_device(dev); + pci_set_power_state(dev, pci_choose_state(dev, state)); + return 0; +} + +static int jmb38x_ms_resume(struct pci_dev *dev) +{ + struct jmb38x_ms *jm = pci_get_drvdata(dev); + int rc; + + pci_set_power_state(dev, PCI_D0); + pci_restore_state(dev); + rc = pci_enable_device(dev); + if (rc) + return rc; + pci_set_master(dev); + + pci_read_config_dword(dev, 0xac, &rc); + pci_write_config_dword(dev, 0xac, rc | 0x00470000); + + for (rc = 0; rc < jm->host_cnt; ++rc) { + if (!jm->hosts[rc]) + break; + memstick_resume_host(jm->hosts[rc]); + memstick_detect_change(jm->hosts[rc]); + } + + return 0; +} + +#else + +#define jmb38x_ms_suspend NULL +#define jmb38x_ms_resume NULL + +#endif /* CONFIG_PM */ + +static int jmb38x_ms_count_slots(struct pci_dev *pdev) +{ + int cnt, rc = 0; + + for (cnt = 0; cnt < PCI_ROM_RESOURCE; ++cnt) { + if (!(IORESOURCE_MEM & pci_resource_flags(pdev, cnt))) + break; + + if (256 != pci_resource_len(pdev, cnt)) + break; + + ++rc; + } + return rc; +} + +static struct memstick_host *jmb38x_ms_alloc_host(struct jmb38x_ms *jm, int cnt) +{ + struct memstick_host *msh; + struct jmb38x_ms_host *host; + + msh = memstick_alloc_host(sizeof(struct jmb38x_ms_host), + &jm->pdev->dev); + if (!msh) + return NULL; + + host = memstick_priv(msh); + host->chip = jm; + host->addr = ioremap(pci_resource_start(jm->pdev, cnt), + pci_resource_len(jm->pdev, cnt)); + if (!host->addr) + goto err_out_free; + + spin_lock_init(&host->lock); + host->id = cnt; + snprintf(host->host_id, DEVICE_ID_SIZE, DRIVER_NAME ":slot%d", + host->id); + host->irq = jm->pdev->irq; + host->timeout_jiffies = msecs_to_jiffies(4000); + msh->request = jmb38x_ms_request; + msh->set_param = jmb38x_ms_set_param; + /* + msh->caps = MEMSTICK_CAP_AUTO_GET_INT | MEMSTICK_CAP_PAR4 + | MEMSTICK_CAP_PAR8; + */ + msh->caps = MEMSTICK_CAP_PAR4 | MEMSTICK_CAP_PAR8; + + setup_timer(&host->timer, jmb38x_ms_abort, (unsigned long)msh); + + if (!request_irq(host->irq, jmb38x_ms_isr, IRQF_SHARED, host->host_id, + msh)) + return msh; + + iounmap(host->addr); +err_out_free: + kfree(msh); + return NULL; +} + +static void jmb38x_ms_free_host(struct memstick_host *msh) +{ + struct jmb38x_ms_host *host = memstick_priv(msh); + + free_irq(host->irq, msh); + iounmap(host->addr); + memstick_free_host(msh); +} + +static int jmb38x_ms_probe(struct pci_dev *pdev, + const struct pci_device_id *dev_id) +{ + struct jmb38x_ms *jm; + int pci_dev_busy = 0; + int rc, cnt; + + rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK); + if (rc) + return rc; + + rc = pci_enable_device(pdev); + if (rc) + return rc; + + pci_set_master(pdev); + + rc = pci_request_regions(pdev, DRIVER_NAME); + if (rc) { + pci_dev_busy = 1; + goto err_out; + } + + pci_read_config_dword(pdev, 0xac, &rc); + pci_write_config_dword(pdev, 0xac, rc | 0x00470000); + + cnt = jmb38x_ms_count_slots(pdev); + if (!cnt) { + rc = -ENODEV; + pci_dev_busy = 1; + goto err_out; + } + + jm = kzalloc(sizeof(struct jmb38x_ms) + + cnt * sizeof(struct memstick_host *), GFP_KERNEL); + if (!jm) { + rc = -ENOMEM; + goto err_out_int; + } + + jm->pdev = pdev; + jm->host_cnt = cnt; + pci_set_drvdata(pdev, jm); + + for (cnt = 0; cnt < jm->host_cnt; ++cnt) { + jm->hosts[cnt] = jmb38x_ms_alloc_host(jm, cnt); + if (!jm->hosts[cnt]) + break; + + rc = memstick_add_host(jm->hosts[cnt]); + + if (rc) { + jmb38x_ms_free_host(jm->hosts[cnt]); + jm->hosts[cnt] = NULL; + break; + } + } + + if (cnt) + return 0; + + rc = -ENODEV; + + pci_set_drvdata(pdev, NULL); + kfree(jm); +err_out_int: + pci_release_regions(pdev); +err_out: + if (!pci_dev_busy) + pci_disable_device(pdev); + return rc; +} + +static void jmb38x_ms_remove(struct pci_dev *dev) +{ + struct jmb38x_ms *jm = pci_get_drvdata(dev); + struct jmb38x_ms_host *host; + int cnt; + unsigned long flags; + + for (cnt = 0; cnt < jm->host_cnt; ++cnt) { + if (!jm->hosts[cnt]) + break; + + host = memstick_priv(jm->hosts[cnt]); + + writel(0, host->addr + INT_SIGNAL_ENABLE); + writel(0, host->addr + INT_STATUS_ENABLE); + mmiowb(); + dev_dbg(&jm->pdev->dev, "interrupts off\n"); + spin_lock_irqsave(&host->lock, flags); + if (host->req) { + host->req->error = -ETIME; + jmb38x_ms_complete_cmd(jm->hosts[cnt], 1); + } + spin_unlock_irqrestore(&host->lock, flags); + + memstick_remove_host(jm->hosts[cnt]); + dev_dbg(&jm->pdev->dev, "host removed\n"); + + jmb38x_ms_free_host(jm->hosts[cnt]); + } + + pci_set_drvdata(dev, NULL); + pci_release_regions(dev); + pci_disable_device(dev); + kfree(jm); +} + +static struct pci_device_id jmb38x_ms_id_tbl [] = { + { PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB38X_MS, PCI_ANY_ID, + PCI_ANY_ID, 0, 0, 0 }, + { } +}; + +static struct pci_driver jmb38x_ms_driver = { + .name = DRIVER_NAME, + .id_table = jmb38x_ms_id_tbl, + .probe = jmb38x_ms_probe, + .remove = jmb38x_ms_remove, + .suspend = jmb38x_ms_suspend, + .resume = jmb38x_ms_resume +}; + +static int __init jmb38x_ms_init(void) +{ + return pci_register_driver(&jmb38x_ms_driver); +} + +static void __exit jmb38x_ms_exit(void) +{ + pci_unregister_driver(&jmb38x_ms_driver); +} + +MODULE_AUTHOR("Alex Dubov"); +MODULE_DESCRIPTION("JMicron jmb38x MemoryStick driver"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, jmb38x_ms_id_tbl); + +module_init(jmb38x_ms_init); +module_exit(jmb38x_ms_exit); diff --git a/drivers/memstick/host/tifm_ms.c b/drivers/memstick/host/tifm_ms.c index 4fb24215bd95..2b5bf52a8302 100644 --- a/drivers/memstick/host/tifm_ms.c +++ b/drivers/memstick/host/tifm_ms.c @@ -20,293 +20,315 @@ #include <asm/io.h> #define DRIVER_NAME "tifm_ms" -#define DRIVER_VERSION "0.1" static int no_dma; module_param(no_dma, bool, 0644); -#define TIFM_MS_TIMEOUT 0x00100 -#define TIFM_MS_BADCRC 0x00200 -#define TIFM_MS_EOTPC 0x01000 -#define TIFM_MS_INT 0x02000 - -/* The meaning of the bit majority in this constant is unknown. */ -#define TIFM_MS_SERIAL 0x04010 +/* + * Some control bits of TIFM appear to conform to Sony's reference design, + * so I'm just assuming they all are. + */ -#define TIFM_MS_SYS_LATCH 0x00100 -#define TIFM_MS_SYS_NOT_RDY 0x00800 -#define TIFM_MS_SYS_DATA 0x10000 +#define TIFM_MS_STAT_DRQ 0x04000 +#define TIFM_MS_STAT_MSINT 0x02000 +#define TIFM_MS_STAT_RDY 0x01000 +#define TIFM_MS_STAT_CRC 0x00200 +#define TIFM_MS_STAT_TOE 0x00100 +#define TIFM_MS_STAT_EMP 0x00020 +#define TIFM_MS_STAT_FUL 0x00010 +#define TIFM_MS_STAT_CED 0x00008 +#define TIFM_MS_STAT_ERR 0x00004 +#define TIFM_MS_STAT_BRQ 0x00002 +#define TIFM_MS_STAT_CNK 0x00001 + +#define TIFM_MS_SYS_DMA 0x10000 +#define TIFM_MS_SYS_RESET 0x08000 +#define TIFM_MS_SYS_SRAC 0x04000 +#define TIFM_MS_SYS_INTEN 0x02000 +#define TIFM_MS_SYS_NOCRC 0x01000 +#define TIFM_MS_SYS_INTCLR 0x00800 +#define TIFM_MS_SYS_MSIEN 0x00400 +#define TIFM_MS_SYS_FCLR 0x00200 +#define TIFM_MS_SYS_FDIR 0x00100 +#define TIFM_MS_SYS_DAM 0x00080 +#define TIFM_MS_SYS_DRM 0x00040 +#define TIFM_MS_SYS_DRQSL 0x00020 +#define TIFM_MS_SYS_REI 0x00010 +#define TIFM_MS_SYS_REO 0x00008 +#define TIFM_MS_SYS_BSY_MASK 0x00007 + +#define TIFM_MS_SYS_FIFO (TIFM_MS_SYS_INTEN | TIFM_MS_SYS_MSIEN \ + | TIFM_MS_SYS_FCLR | TIFM_MS_SYS_BSY_MASK) /* Hardware flags */ enum { - CMD_READY = 0x0001, - FIFO_READY = 0x0002, - CARD_READY = 0x0004, - DATA_CARRY = 0x0008 + CMD_READY = 0x01, + FIFO_READY = 0x02, + CARD_INT = 0x04 }; struct tifm_ms { struct tifm_dev *dev; - unsigned short eject:1, - no_dma:1; - unsigned short cmd_flags; + struct timer_list timer; + struct memstick_request *req; unsigned int mode_mask; unsigned int block_pos; unsigned long timeout_jiffies; - - struct timer_list timer; - struct memstick_request *req; + unsigned char eject:1, + use_dma:1; + unsigned char cmd_flags; + unsigned char io_pos; unsigned int io_word; }; -static void tifm_ms_read_fifo(struct tifm_ms *host, unsigned int fifo_offset, - struct page *pg, unsigned int page_off, - unsigned int length) +static unsigned int tifm_ms_read_data(struct tifm_ms *host, + unsigned char *buf, unsigned int length) { struct tifm_dev *sock = host->dev; - unsigned int cnt = 0, off = 0; - unsigned char *buf = kmap_atomic(pg, KM_BIO_DST_IRQ) + page_off; + unsigned int off = 0; + + while (host->io_pos && length) { + buf[off++] = host->io_word & 0xff; + host->io_word >>= 8; + length--; + host->io_pos--; + } - if (host->cmd_flags & DATA_CARRY) { - while ((fifo_offset & 3) && length) { + if (!length) + return off; + + while (!(TIFM_MS_STAT_EMP & readl(sock->addr + SOCK_MS_STATUS))) { + if (length < 4) + break; + *(unsigned int *)(buf + off) = __raw_readl(sock->addr + + SOCK_MS_DATA); + length -= 4; + off += 4; + } + + if (length + && !(TIFM_MS_STAT_EMP & readl(sock->addr + SOCK_MS_STATUS))) { + host->io_word = readl(sock->addr + SOCK_MS_DATA); + for (host->io_pos = 4; host->io_pos; --host->io_pos) { buf[off++] = host->io_word & 0xff; host->io_word >>= 8; length--; - fifo_offset++; + if (!length) + break; } - if (!(fifo_offset & 3)) - host->cmd_flags &= ~DATA_CARRY; - if (!length) - return; } - do { - host->io_word = readl(sock->addr + SOCK_FIFO_ACCESS - + fifo_offset); - cnt = 4; - while (length && cnt) { - buf[off++] = (host->io_word >> 8) & 0xff; - cnt--; - length--; - } - fifo_offset += 4 - cnt; - } while (length); - - if (cnt) - host->cmd_flags |= DATA_CARRY; - - kunmap_atomic(buf - page_off, KM_BIO_DST_IRQ); + return off; } -static void tifm_ms_write_fifo(struct tifm_ms *host, unsigned int fifo_offset, - struct page *pg, unsigned int page_off, - unsigned int length) +static unsigned int tifm_ms_write_data(struct tifm_ms *host, + unsigned char *buf, unsigned int length) { struct tifm_dev *sock = host->dev; - unsigned int cnt = 0, off = 0; - unsigned char *buf = kmap_atomic(pg, KM_BIO_SRC_IRQ) + page_off; + unsigned int off = 0; - if (host->cmd_flags & DATA_CARRY) { - while (fifo_offset & 3) { - host->io_word |= buf[off++] << (8 * (fifo_offset & 3)); + if (host->io_pos) { + while (host->io_pos < 4 && length) { + host->io_word |= buf[off++] << (host->io_pos * 8); + host->io_pos++; length--; - fifo_offset++; } - if (!(fifo_offset & 3)) { - writel(host->io_word, sock->addr + SOCK_FIFO_ACCESS - + fifo_offset - 4); - - host->cmd_flags &= ~DATA_CARRY; - } - if (!length) - return; } - do { - cnt = 4; + if (host->io_pos == 4 + && !(TIFM_MS_STAT_FUL & readl(sock->addr + SOCK_MS_STATUS))) { + writel(TIFM_MS_SYS_FDIR | readl(sock->addr + SOCK_MS_SYSTEM), + sock->addr + SOCK_MS_SYSTEM); + writel(host->io_word, sock->addr + SOCK_MS_DATA); + host->io_pos = 0; host->io_word = 0; - while (length && cnt) { - host->io_word |= buf[off++] << (4 - cnt); - cnt--; - length--; - } - fifo_offset += 4 - cnt; - if (!cnt) - writel(host->io_word, sock->addr + SOCK_FIFO_ACCESS - + fifo_offset - 4); - - } while (length); - - if (cnt) - host->cmd_flags |= DATA_CARRY; + } else if (host->io_pos) { + return off; + } - kunmap_atomic(buf - page_off, KM_BIO_SRC_IRQ); -} + if (!length) + return off; -static void tifm_ms_move_block(struct tifm_ms *host, unsigned int length) -{ - unsigned int t_size; - unsigned int off = host->req->sg.offset + host->block_pos; - unsigned int p_off, p_cnt; - struct page *pg; - unsigned long flags; + while (!(TIFM_MS_STAT_FUL & readl(sock->addr + SOCK_MS_STATUS))) { + if (length < 4) + break; + writel(TIFM_MS_SYS_FDIR | readl(sock->addr + SOCK_MS_SYSTEM), + sock->addr + SOCK_MS_SYSTEM); + __raw_writel(*(unsigned int *)(buf + off), + sock->addr + SOCK_MS_DATA); + length -= 4; + off += 4; + } - dev_dbg(&host->dev->dev, "moving block\n"); - local_irq_save(flags); - t_size = length; - while (t_size) { - pg = nth_page(sg_page(&host->req->sg), off >> PAGE_SHIFT); - p_off = offset_in_page(off); - p_cnt = PAGE_SIZE - p_off; - p_cnt = min(p_cnt, t_size); + switch (length) { + case 3: + host->io_word |= buf[off + 2] << 16; + host->io_pos++; + case 2: + host->io_word |= buf[off + 1] << 8; + host->io_pos++; + case 1: + host->io_word |= buf[off]; + host->io_pos++; + } - if (host->req->data_dir == WRITE) - tifm_ms_write_fifo(host, length - t_size, - pg, p_off, p_cnt); - else - tifm_ms_read_fifo(host, length - t_size, - pg, p_off, p_cnt); + off += host->io_pos; - t_size -= p_cnt; - } - local_irq_restore(flags); + return off; } -static int tifm_ms_transfer_data(struct tifm_ms *host, int skip) +static unsigned int tifm_ms_transfer_data(struct tifm_ms *host) { struct tifm_dev *sock = host->dev; - unsigned int length = host->req->sg.length - host->block_pos; + unsigned int length; + unsigned int off; + unsigned int t_size, p_off, p_cnt; + unsigned char *buf; + struct page *pg; + unsigned long flags = 0; + + if (host->req->long_data) { + length = host->req->sg.length - host->block_pos; + off = host->req->sg.offset + host->block_pos; + } else { + length = host->req->data_len - host->block_pos; + off = 0; + } + dev_dbg(&sock->dev, "fifo data transfer, %d, %d\n", length, + host->block_pos); + + while (length) { + if (host->req->long_data) { + pg = nth_page(sg_page(&host->req->sg), + off >> PAGE_SHIFT); + p_off = offset_in_page(off); + p_cnt = PAGE_SIZE - p_off; + p_cnt = min(p_cnt, length); + + local_irq_save(flags); + buf = kmap_atomic(pg, KM_BIO_SRC_IRQ) + p_off; + } else { + buf = host->req->data + host->block_pos; + p_cnt = host->req->data_len - host->block_pos; + } - if (!length) - return 1; + t_size = host->req->data_dir == WRITE + ? tifm_ms_write_data(host, buf, p_cnt) + : tifm_ms_read_data(host, buf, p_cnt); - if (length > TIFM_FIFO_SIZE) - length = TIFM_FIFO_SIZE; + if (host->req->long_data) { + kunmap_atomic(buf - p_off, KM_BIO_SRC_IRQ); + local_irq_restore(flags); + } - if (!skip) { - tifm_ms_move_block(host, length); - host->block_pos += length; + if (!t_size) + break; + host->block_pos += t_size; + length -= t_size; + off += t_size; } - if ((host->req->data_dir == READ) - && (host->block_pos == host->req->sg.length)) - return 1; - - writel(ilog2(length) - 2, sock->addr + SOCK_FIFO_PAGE_SIZE); - if (host->req->data_dir == WRITE) - writel((1 << 8) | TIFM_DMA_TX, sock->addr + SOCK_DMA_CONTROL); - else - writel((1 << 8), sock->addr + SOCK_DMA_CONTROL); + dev_dbg(&sock->dev, "fifo data transfer, %d remaining\n", length); + if (!length && (host->req->data_dir == WRITE)) { + if (host->io_pos) { + writel(TIFM_MS_SYS_FDIR + | readl(sock->addr + SOCK_MS_SYSTEM), + sock->addr + SOCK_MS_SYSTEM); + writel(host->io_word, sock->addr + SOCK_MS_DATA); + } + writel(TIFM_MS_SYS_FDIR + | readl(sock->addr + SOCK_MS_SYSTEM), + sock->addr + SOCK_MS_SYSTEM); + writel(0, sock->addr + SOCK_MS_DATA); + } else { + readl(sock->addr + SOCK_MS_DATA); + } - return 0; + return length; } static int tifm_ms_issue_cmd(struct tifm_ms *host) { struct tifm_dev *sock = host->dev; unsigned char *data; - unsigned int data_len = 0, cmd = 0, cmd_mask = 0, cnt, tval = 0; + unsigned int data_len, cmd, sys_param; host->cmd_flags = 0; + host->block_pos = 0; + host->io_pos = 0; + host->io_word = 0; + host->cmd_flags = 0; - if (host->req->io_type == MEMSTICK_IO_SG) { - if (!host->no_dma) { - if (1 != tifm_map_sg(sock, &host->req->sg, 1, - host->req->data_dir == READ - ? PCI_DMA_FROMDEVICE - : PCI_DMA_TODEVICE)) { - host->req->error = -ENOMEM; - return host->req->error; - } - data_len = sg_dma_len(&host->req->sg); - } else - data_len = host->req->sg.length; - - writel(TIFM_FIFO_INT_SETALL, - sock->addr + SOCK_DMA_FIFO_INT_ENABLE_CLEAR); - writel(TIFM_FIFO_ENABLE, - sock->addr + SOCK_FIFO_CONTROL); - writel(TIFM_FIFO_INTMASK, - sock->addr + SOCK_DMA_FIFO_INT_ENABLE_SET); + data = host->req->data; - if (!host->no_dma) { - writel(ilog2(data_len) - 2, - sock->addr + SOCK_FIFO_PAGE_SIZE); - writel(sg_dma_address(&host->req->sg), - sock->addr + SOCK_DMA_ADDRESS); - if (host->req->data_dir == WRITE) - writel((1 << 8) | TIFM_DMA_TX | TIFM_DMA_EN, - sock->addr + SOCK_DMA_CONTROL); - else - writel((1 << 8) | TIFM_DMA_EN, - sock->addr + SOCK_DMA_CONTROL); - } else { - tifm_ms_transfer_data(host, - host->req->data_dir == READ); - } + host->use_dma = !no_dma; - cmd_mask = readl(sock->addr + SOCK_MS_SYSTEM); - cmd_mask |= TIFM_MS_SYS_DATA | TIFM_MS_SYS_NOT_RDY; - writel(cmd_mask, sock->addr + SOCK_MS_SYSTEM); - } else if (host->req->io_type == MEMSTICK_IO_VAL) { - data = host->req->data; + if (host->req->long_data) { + data_len = host->req->sg.length; + if (!is_power_of_2(data_len)) + host->use_dma = 0; + } else { data_len = host->req->data_len; + host->use_dma = 0; + } - cmd_mask = host->mode_mask | 0x2607; /* unknown constant */ - - if (host->req->data_dir == WRITE) { - cmd_mask |= TIFM_MS_SYS_LATCH; - writel(cmd_mask, sock->addr + SOCK_MS_SYSTEM); - for (cnt = 0; (data_len - cnt) >= 4; cnt += 4) { - writel(TIFM_MS_SYS_LATCH - | readl(sock->addr + SOCK_MS_SYSTEM), - sock->addr + SOCK_MS_SYSTEM); - __raw_writel(*(unsigned int *)(data + cnt), - sock->addr + SOCK_MS_DATA); - dev_dbg(&sock->dev, "writing %x\n", - *(int *)(data + cnt)); - } - switch (data_len - cnt) { - case 3: - tval |= data[cnt + 2] << 16; - case 2: - tval |= data[cnt + 1] << 8; - case 1: - tval |= data[cnt]; - writel(TIFM_MS_SYS_LATCH - | readl(sock->addr + SOCK_MS_SYSTEM), - sock->addr + SOCK_MS_SYSTEM); - writel(tval, sock->addr + SOCK_MS_DATA); - dev_dbg(&sock->dev, "writing %x\n", tval); - } + writel(TIFM_FIFO_INT_SETALL, + sock->addr + SOCK_DMA_FIFO_INT_ENABLE_CLEAR); + writel(TIFM_FIFO_ENABLE, + sock->addr + SOCK_FIFO_CONTROL); + + if (host->use_dma) { + if (1 != tifm_map_sg(sock, &host->req->sg, 1, + host->req->data_dir == READ + ? PCI_DMA_FROMDEVICE + : PCI_DMA_TODEVICE)) { + host->req->error = -ENOMEM; + return host->req->error; + } + data_len = sg_dma_len(&host->req->sg); - writel(TIFM_MS_SYS_LATCH - | readl(sock->addr + SOCK_MS_SYSTEM), - sock->addr + SOCK_MS_SYSTEM); - writel(0, sock->addr + SOCK_MS_DATA); - dev_dbg(&sock->dev, "writing %x\n", 0); + writel(ilog2(data_len) - 2, + sock->addr + SOCK_FIFO_PAGE_SIZE); + writel(TIFM_FIFO_INTMASK, + sock->addr + SOCK_DMA_FIFO_INT_ENABLE_SET); + sys_param = TIFM_DMA_EN | (1 << 8); + if (host->req->data_dir == WRITE) + sys_param |= TIFM_DMA_TX; + + writel(TIFM_FIFO_INTMASK, + sock->addr + SOCK_DMA_FIFO_INT_ENABLE_SET); - } else - writel(cmd_mask, sock->addr + SOCK_MS_SYSTEM); + writel(sg_dma_address(&host->req->sg), + sock->addr + SOCK_DMA_ADDRESS); + writel(sys_param, sock->addr + SOCK_DMA_CONTROL); + } else { + writel(host->mode_mask | TIFM_MS_SYS_FIFO, + sock->addr + SOCK_MS_SYSTEM); - cmd_mask = readl(sock->addr + SOCK_MS_SYSTEM); - cmd_mask &= ~TIFM_MS_SYS_DATA; - cmd_mask |= TIFM_MS_SYS_NOT_RDY; - dev_dbg(&sock->dev, "mask %x\n", cmd_mask); - writel(cmd_mask, sock->addr + SOCK_MS_SYSTEM); - } else - BUG(); + writel(TIFM_FIFO_MORE, + sock->addr + SOCK_DMA_FIFO_INT_ENABLE_SET); + } mod_timer(&host->timer, jiffies + host->timeout_jiffies); writel(TIFM_CTRL_LED | readl(sock->addr + SOCK_CONTROL), sock->addr + SOCK_CONTROL); host->req->error = 0; + sys_param = readl(sock->addr + SOCK_MS_SYSTEM); + sys_param |= TIFM_MS_SYS_INTCLR; + + if (host->use_dma) + sys_param |= TIFM_MS_SYS_DMA; + else + sys_param &= ~TIFM_MS_SYS_DMA; + + writel(sys_param, sock->addr + SOCK_MS_SYSTEM); + cmd = (host->req->tpc & 0xf) << 12; cmd |= data_len; writel(cmd, sock->addr + SOCK_MS_COMMAND); - dev_dbg(&sock->dev, "executing TPC %x, %x\n", cmd, cmd_mask); + dev_dbg(&sock->dev, "executing TPC %x, %x\n", cmd, sys_param); return 0; } @@ -314,47 +336,20 @@ static void tifm_ms_complete_cmd(struct tifm_ms *host) { struct tifm_dev *sock = host->dev; struct memstick_host *msh = tifm_get_drvdata(sock); - unsigned int tval = 0, data_len; - unsigned char *data; int rc; del_timer(&host->timer); - if (host->req->io_type == MEMSTICK_IO_SG) { - if (!host->no_dma) - tifm_unmap_sg(sock, &host->req->sg, 1, - host->req->data_dir == READ - ? PCI_DMA_FROMDEVICE - : PCI_DMA_TODEVICE); - } else if (host->req->io_type == MEMSTICK_IO_VAL) { - writel(~TIFM_MS_SYS_DATA & readl(sock->addr + SOCK_MS_SYSTEM), - sock->addr + SOCK_MS_SYSTEM); - - data = host->req->data; - data_len = host->req->data_len; - if (host->req->data_dir == READ) { - for (rc = 0; (data_len - rc) >= 4; rc += 4) - *(int *)(data + rc) - = __raw_readl(sock->addr - + SOCK_MS_DATA); - - if (data_len - rc) - tval = readl(sock->addr + SOCK_MS_DATA); - switch (data_len - rc) { - case 3: - data[rc + 2] = (tval >> 16) & 0xff; - case 2: - data[rc + 1] = (tval >> 8) & 0xff; - case 1: - data[rc] = tval & 0xff; - } - readl(sock->addr + SOCK_MS_DATA); - } - } + if (host->use_dma) + tifm_unmap_sg(sock, &host->req->sg, 1, + host->req->data_dir == READ + ? PCI_DMA_FROMDEVICE + : PCI_DMA_TODEVICE); writel((~TIFM_CTRL_LED) & readl(sock->addr + SOCK_CONTROL), sock->addr + SOCK_CONTROL); + dev_dbg(&sock->dev, "TPC complete\n"); do { rc = memstick_next_req(msh, &host->req); } while (!rc && tifm_ms_issue_cmd(host)); @@ -365,11 +360,10 @@ static int tifm_ms_check_status(struct tifm_ms *host) if (!host->req->error) { if (!(host->cmd_flags & CMD_READY)) return 1; - if ((host->req->io_type == MEMSTICK_IO_SG) - && !(host->cmd_flags & FIFO_READY)) + if (!(host->cmd_flags & FIFO_READY)) return 1; if (host->req->need_card_int - && !(host->cmd_flags & CARD_READY)) + && !(host->cmd_flags & CARD_INT)) return 1; } return 0; @@ -379,18 +373,24 @@ static int tifm_ms_check_status(struct tifm_ms *host) static void tifm_ms_data_event(struct tifm_dev *sock) { struct tifm_ms *host; - unsigned int fifo_status = 0; + unsigned int fifo_status = 0, host_status = 0; int rc = 1; spin_lock(&sock->lock); host = memstick_priv((struct memstick_host *)tifm_get_drvdata(sock)); fifo_status = readl(sock->addr + SOCK_DMA_FIFO_STATUS); - dev_dbg(&sock->dev, "data event: fifo_status %x, flags %x\n", - fifo_status, host->cmd_flags); + host_status = readl(sock->addr + SOCK_MS_STATUS); + dev_dbg(&sock->dev, + "data event: fifo_status %x, host_status %x, flags %x\n", + fifo_status, host_status, host->cmd_flags); if (host->req) { - if (fifo_status & TIFM_FIFO_READY) { - if (!host->no_dma || tifm_ms_transfer_data(host, 0)) { + if (host->use_dma && (fifo_status & 1)) { + host->cmd_flags |= FIFO_READY; + rc = tifm_ms_check_status(host); + } + if (!host->use_dma && (fifo_status & TIFM_FIFO_MORE)) { + if (!tifm_ms_transfer_data(host)) { host->cmd_flags |= FIFO_READY; rc = tifm_ms_check_status(host); } @@ -419,9 +419,9 @@ static void tifm_ms_card_event(struct tifm_dev *sock) host_status, host->cmd_flags); if (host->req) { - if (host_status & TIFM_MS_TIMEOUT) + if (host_status & TIFM_MS_STAT_TOE) host->req->error = -ETIME; - else if (host_status & TIFM_MS_BADCRC) + else if (host_status & TIFM_MS_STAT_CRC) host->req->error = -EILSEQ; if (host->req->error) { @@ -430,18 +430,17 @@ static void tifm_ms_card_event(struct tifm_dev *sock) writel(TIFM_DMA_RESET, sock->addr + SOCK_DMA_CONTROL); } - if (host_status & TIFM_MS_EOTPC) + if (host_status & TIFM_MS_STAT_RDY) host->cmd_flags |= CMD_READY; - if (host_status & TIFM_MS_INT) - host->cmd_flags |= CARD_READY; + + if (host_status & TIFM_MS_STAT_MSINT) + host->cmd_flags |= CARD_INT; rc = tifm_ms_check_status(host); } - writel(TIFM_MS_SYS_NOT_RDY | readl(sock->addr + SOCK_MS_SYSTEM), - sock->addr + SOCK_MS_SYSTEM); - writel((~TIFM_MS_SYS_DATA) & readl(sock->addr + SOCK_MS_SYSTEM), + writel(TIFM_MS_SYS_INTCLR | readl(sock->addr + SOCK_MS_SYSTEM), sock->addr + SOCK_MS_SYSTEM); if (!rc) @@ -497,15 +496,26 @@ static void tifm_ms_set_param(struct memstick_host *msh, switch (param) { case MEMSTICK_POWER: - /* this is set by card detection mechanism */ + /* also affected by media detection mechanism */ + if (value == MEMSTICK_POWER_ON) { + host->mode_mask = TIFM_MS_SYS_SRAC | TIFM_MS_SYS_REI; + writel(TIFM_MS_SYS_RESET, sock->addr + SOCK_MS_SYSTEM); + writel(TIFM_MS_SYS_FCLR | TIFM_MS_SYS_INTCLR, + sock->addr + SOCK_MS_SYSTEM); + writel(0xffffffff, sock->addr + SOCK_MS_STATUS); + } else if (value == MEMSTICK_POWER_OFF) { + writel(TIFM_MS_SYS_FCLR | TIFM_MS_SYS_INTCLR, + sock->addr + SOCK_MS_SYSTEM); + writel(0xffffffff, sock->addr + SOCK_MS_STATUS); + } break; case MEMSTICK_INTERFACE: if (value == MEMSTICK_SERIAL) { - host->mode_mask = TIFM_MS_SERIAL; + host->mode_mask = TIFM_MS_SYS_SRAC | TIFM_MS_SYS_REI; writel((~TIFM_CTRL_FAST_CLK) & readl(sock->addr + SOCK_CONTROL), sock->addr + SOCK_CONTROL); - } else if (value == MEMSTICK_PARALLEL) { + } else if (value == MEMSTICK_PAR4) { host->mode_mask = 0; writel(TIFM_CTRL_FAST_CLK | readl(sock->addr + SOCK_CONTROL), @@ -532,21 +542,6 @@ static void tifm_ms_abort(unsigned long data) tifm_eject(host->dev); } -static int tifm_ms_initialize_host(struct tifm_ms *host) -{ - struct tifm_dev *sock = host->dev; - struct memstick_host *msh = tifm_get_drvdata(sock); - - host->mode_mask = TIFM_MS_SERIAL; - writel(0x8000, sock->addr + SOCK_MS_SYSTEM); - writel(0x0200 | TIFM_MS_SYS_NOT_RDY, sock->addr + SOCK_MS_SYSTEM); - writel(0xffffffff, sock->addr + SOCK_MS_STATUS); - if (tifm_has_ms_pif(sock)) - msh->caps |= MEMSTICK_CAP_PARALLEL; - - return 0; -} - static int tifm_ms_probe(struct tifm_dev *sock) { struct memstick_host *msh; @@ -568,7 +563,6 @@ static int tifm_ms_probe(struct tifm_dev *sock) tifm_set_drvdata(sock, msh); host->dev = sock; host->timeout_jiffies = msecs_to_jiffies(1000); - host->no_dma = no_dma; setup_timer(&host->timer, tifm_ms_abort, (unsigned long)host); @@ -576,10 +570,10 @@ static int tifm_ms_probe(struct tifm_dev *sock) msh->set_param = tifm_ms_set_param; sock->card_event = tifm_ms_card_event; sock->data_event = tifm_ms_data_event; - rc = tifm_ms_initialize_host(host); + if (tifm_has_ms_pif(sock)) + msh->caps |= MEMSTICK_CAP_PAR4; - if (!rc) - rc = memstick_add_host(msh); + rc = memstick_add_host(msh); if (!rc) return 0; @@ -601,7 +595,7 @@ static void tifm_ms_remove(struct tifm_dev *sock) writel(TIFM_FIFO_INT_SETALL, sock->addr + SOCK_DMA_FIFO_INT_ENABLE_CLEAR); writel(TIFM_DMA_RESET, sock->addr + SOCK_DMA_CONTROL); - if ((host->req->io_type == MEMSTICK_IO_SG) && !host->no_dma) + if (host->use_dma) tifm_unmap_sg(sock, &host->req->sg, 1, host->req->data_dir == READ ? PCI_DMA_TODEVICE @@ -617,10 +611,6 @@ static void tifm_ms_remove(struct tifm_dev *sock) spin_unlock_irqrestore(&sock->lock, flags); memstick_remove_host(msh); - - writel(0x0200 | TIFM_MS_SYS_NOT_RDY, sock->addr + SOCK_MS_SYSTEM); - writel(0xffffffff, sock->addr + SOCK_MS_STATUS); - memstick_free_host(msh); } @@ -628,17 +618,17 @@ static void tifm_ms_remove(struct tifm_dev *sock) static int tifm_ms_suspend(struct tifm_dev *sock, pm_message_t state) { + struct memstick_host *msh = tifm_get_drvdata(sock); + + memstick_suspend_host(msh); return 0; } static int tifm_ms_resume(struct tifm_dev *sock) { struct memstick_host *msh = tifm_get_drvdata(sock); - struct tifm_ms *host = memstick_priv(msh); - - tifm_ms_initialize_host(host); - memstick_detect_change(msh); + memstick_resume_host(msh); return 0; } @@ -679,7 +669,6 @@ MODULE_AUTHOR("Alex Dubov"); MODULE_DESCRIPTION("TI FlashMedia MemoryStick driver"); MODULE_LICENSE("GPL"); MODULE_DEVICE_TABLE(tifm, tifm_ms_id_tbl); -MODULE_VERSION(DRIVER_VERSION); module_init(tifm_ms_init); module_exit(tifm_ms_exit); diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c index 0c303c84b37b..6b6df8679585 100644 --- a/drivers/message/fusion/mptbase.c +++ b/drivers/message/fusion/mptbase.c @@ -632,8 +632,7 @@ mpt_deregister(u8 cb_idx) /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ /** - * mpt_event_register - Register protocol-specific event callback - * handler. + * mpt_event_register - Register protocol-specific event callback handler. * @cb_idx: previously registered (via mpt_register) callback handle * @ev_cbfunc: callback function * @@ -654,8 +653,7 @@ mpt_event_register(u8 cb_idx, MPT_EVHANDLER ev_cbfunc) /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ /** - * mpt_event_deregister - Deregister protocol-specific event callback - * handler. + * mpt_event_deregister - Deregister protocol-specific event callback handler * @cb_idx: previously registered callback handle * * Each protocol-specific driver should call this routine @@ -765,11 +763,13 @@ mpt_device_driver_deregister(u8 cb_idx) /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ /** - * mpt_get_msg_frame - Obtain a MPT request frame from the pool (of 1024) - * allocated per MPT adapter. + * mpt_get_msg_frame - Obtain an MPT request frame from the pool * @cb_idx: Handle of registered MPT protocol driver * @ioc: Pointer to MPT adapter structure * + * Obtain an MPT request frame from the pool (of 1024) that are + * allocated per MPT adapter. + * * Returns pointer to a MPT request frame or %NULL if none are available * or IOC is not active. */ @@ -834,13 +834,12 @@ mpt_get_msg_frame(u8 cb_idx, MPT_ADAPTER *ioc) /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ /** - * mpt_put_msg_frame - Send a protocol specific MPT request frame - * to a IOC. + * mpt_put_msg_frame - Send a protocol-specific MPT request frame to an IOC * @cb_idx: Handle of registered MPT protocol driver * @ioc: Pointer to MPT adapter structure * @mf: Pointer to MPT request frame * - * This routine posts a MPT request frame to the request post FIFO of a + * This routine posts an MPT request frame to the request post FIFO of a * specific MPT adapter. */ void @@ -868,13 +867,15 @@ mpt_put_msg_frame(u8 cb_idx, MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf) } /** - * mpt_put_msg_frame_hi_pri - Send a protocol specific MPT request frame - * to a IOC using hi priority request queue. + * mpt_put_msg_frame_hi_pri - Send a hi-pri protocol-specific MPT request frame * @cb_idx: Handle of registered MPT protocol driver * @ioc: Pointer to MPT adapter structure * @mf: Pointer to MPT request frame * - * This routine posts a MPT request frame to the request post FIFO of a + * Send a protocol-specific MPT request frame to an IOC using + * hi-priority request queue. + * + * This routine posts an MPT request frame to the request post FIFO of a * specific MPT adapter. **/ void diff --git a/drivers/message/fusion/mptsas.c b/drivers/message/fusion/mptsas.c index f77b329f6923..78734e25edd5 100644 --- a/drivers/message/fusion/mptsas.c +++ b/drivers/message/fusion/mptsas.c @@ -1701,6 +1701,11 @@ mptsas_sas_expander_pg0(MPT_ADAPTER *ioc, struct mptsas_portinfo *port_info, if (error) goto out_free_consistent; + if (!buffer->NumPhys) { + error = -ENODEV; + goto out_free_consistent; + } + /* save config data */ port_info->num_phys = buffer->NumPhys; port_info->phy_info = kcalloc(port_info->num_phys, diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c index af1de0ccee2f..0c252f60c4c1 100644 --- a/drivers/message/fusion/mptscsih.c +++ b/drivers/message/fusion/mptscsih.c @@ -1533,7 +1533,7 @@ mptscsih_freeChainBuffers(MPT_ADAPTER *ioc, int req_idx) * * Remark: Currently invoked from a non-interrupt thread (_bh). * - * Remark: With old EH code, at most 1 SCSI TaskMgmt function per IOC + * Note: With old EH code, at most 1 SCSI TaskMgmt function per IOC * will be active. * * Returns 0 for SUCCESS, or %FAILED. @@ -2537,14 +2537,12 @@ mptscsih_copy_sense_data(struct scsi_cmnd *sc, MPT_SCSI_HOST *hd, MPT_FRAME_HDR /** * mptscsih_get_scsi_lookup - * - * retrieves scmd entry from ScsiLookup[] array list - * * @ioc: Pointer to MPT_ADAPTER structure * @i: index into the array * - * Returns the scsi_cmd pointer + * retrieves scmd entry from ScsiLookup[] array list * + * Returns the scsi_cmd pointer **/ static struct scsi_cmnd * mptscsih_get_scsi_lookup(MPT_ADAPTER *ioc, int i) @@ -2561,14 +2559,12 @@ mptscsih_get_scsi_lookup(MPT_ADAPTER *ioc, int i) /** * mptscsih_getclear_scsi_lookup - * - * retrieves and clears scmd entry from ScsiLookup[] array list - * * @ioc: Pointer to MPT_ADAPTER structure * @i: index into the array * - * Returns the scsi_cmd pointer + * retrieves and clears scmd entry from ScsiLookup[] array list * + * Returns the scsi_cmd pointer **/ static struct scsi_cmnd * mptscsih_getclear_scsi_lookup(MPT_ADAPTER *ioc, int i) diff --git a/drivers/mfd/sm501.c b/drivers/mfd/sm501.c index afd82966f9a0..13bac53db69a 100644 --- a/drivers/mfd/sm501.c +++ b/drivers/mfd/sm501.c @@ -48,31 +48,13 @@ struct sm501_devdata { unsigned int pdev_id; unsigned int irq; void __iomem *regs; + unsigned int rev; }; #define MHZ (1000 * 1000) #ifdef DEBUG -static const unsigned int misc_div[] = { - [0] = 1, - [1] = 2, - [2] = 4, - [3] = 8, - [4] = 16, - [5] = 32, - [6] = 64, - [7] = 128, - [8] = 3, - [9] = 6, - [10] = 12, - [11] = 24, - [12] = 48, - [13] = 96, - [14] = 192, - [15] = 384, -}; - -static const unsigned int px_div[] = { +static const unsigned int div_tab[] = { [0] = 1, [1] = 2, [2] = 4, @@ -101,12 +83,12 @@ static const unsigned int px_div[] = { static unsigned long decode_div(unsigned long pll2, unsigned long val, unsigned int lshft, unsigned int selbit, - unsigned long mask, const unsigned int *dtab) + unsigned long mask) { if (val & selbit) pll2 = 288 * MHZ; - return pll2 / dtab[(val >> lshft) & mask]; + return pll2 / div_tab[(val >> lshft) & mask]; } #define fmt_freq(x) ((x) / MHZ), ((x) % MHZ), (x) @@ -141,10 +123,10 @@ static void sm501_dump_clk(struct sm501_devdata *sm) } sdclk0 = (misct & (1<<12)) ? pll2 : 288 * MHZ; - sdclk0 /= misc_div[((misct >> 8) & 0xf)]; + sdclk0 /= div_tab[((misct >> 8) & 0xf)]; sdclk1 = (misct & (1<<20)) ? pll2 : 288 * MHZ; - sdclk1 /= misc_div[((misct >> 16) & 0xf)]; + sdclk1 /= div_tab[((misct >> 16) & 0xf)]; dev_dbg(sm->dev, "MISCT=%08lx, PM0=%08lx, PM1=%08lx\n", misct, pm0, pm1); @@ -158,19 +140,19 @@ static void sm501_dump_clk(struct sm501_devdata *sm) "P2 %ld.%ld MHz (%ld), V2 %ld.%ld (%ld), " "M %ld.%ld (%ld), MX1 %ld.%ld (%ld)\n", (pmc & 3 ) == 0 ? '*' : '-', - fmt_freq(decode_div(pll2, pm0, 24, 1<<29, 31, px_div)), - fmt_freq(decode_div(pll2, pm0, 16, 1<<20, 15, misc_div)), - fmt_freq(decode_div(pll2, pm0, 8, 1<<12, 15, misc_div)), - fmt_freq(decode_div(pll2, pm0, 0, 1<<4, 15, misc_div))); + fmt_freq(decode_div(pll2, pm0, 24, 1<<29, 31)), + fmt_freq(decode_div(pll2, pm0, 16, 1<<20, 15)), + fmt_freq(decode_div(pll2, pm0, 8, 1<<12, 15)), + fmt_freq(decode_div(pll2, pm0, 0, 1<<4, 15))); dev_dbg(sm->dev, "PM1[%c]: " "P2 %ld.%ld MHz (%ld), V2 %ld.%ld (%ld), " "M %ld.%ld (%ld), MX1 %ld.%ld (%ld)\n", (pmc & 3 ) == 1 ? '*' : '-', - fmt_freq(decode_div(pll2, pm1, 24, 1<<29, 31, px_div)), - fmt_freq(decode_div(pll2, pm1, 16, 1<<20, 15, misc_div)), - fmt_freq(decode_div(pll2, pm1, 8, 1<<12, 15, misc_div)), - fmt_freq(decode_div(pll2, pm1, 0, 1<<4, 15, misc_div))); + fmt_freq(decode_div(pll2, pm1, 24, 1<<29, 31)), + fmt_freq(decode_div(pll2, pm1, 16, 1<<20, 15)), + fmt_freq(decode_div(pll2, pm1, 8, 1<<12, 15)), + fmt_freq(decode_div(pll2, pm1, 0, 1<<4, 15))); } static void sm501_dump_regs(struct sm501_devdata *sm) @@ -436,46 +418,108 @@ struct sm501_clock { unsigned long mclk; int divider; int shift; + unsigned int m, n, k; }; +/* sm501_calc_clock + * + * Calculates the nearest discrete clock frequency that + * can be achieved with the specified input clock. + * the maximum divisor is 3 or 5 + */ + +static int sm501_calc_clock(unsigned long freq, + struct sm501_clock *clock, + int max_div, + unsigned long mclk, + long *best_diff) +{ + int ret = 0; + int divider; + int shift; + long diff; + + /* try dividers 1 and 3 for CRT and for panel, + try divider 5 for panel only.*/ + + for (divider = 1; divider <= max_div; divider += 2) { + /* try all 8 shift values.*/ + for (shift = 0; shift < 8; shift++) { + /* Calculate difference to requested clock */ + diff = sm501fb_round_div(mclk, divider << shift) - freq; + if (diff < 0) + diff = -diff; + + /* If it is less than the current, use it */ + if (diff < *best_diff) { + *best_diff = diff; + + clock->mclk = mclk; + clock->divider = divider; + clock->shift = shift; + ret = 1; + } + } + } + + return ret; +} + +/* sm501_calc_pll + * + * Calculates the nearest discrete clock frequency that can be + * achieved using the programmable PLL. + * the maximum divisor is 3 or 5 + */ + +static unsigned long sm501_calc_pll(unsigned long freq, + struct sm501_clock *clock, + int max_div) +{ + unsigned long mclk; + unsigned int m, n, k; + long best_diff = 999999999; + + /* + * The SM502 datasheet doesn't specify the min/max values for M and N. + * N = 1 at least doesn't work in practice. + */ + for (m = 2; m <= 255; m++) { + for (n = 2; n <= 127; n++) { + for (k = 0; k <= 1; k++) { + mclk = (24000000UL * m / n) >> k; + + if (sm501_calc_clock(freq, clock, max_div, + mclk, &best_diff)) { + clock->m = m; + clock->n = n; + clock->k = k; + } + } + } + } + + /* Return best clock. */ + return clock->mclk / (clock->divider << clock->shift); +} + /* sm501_select_clock * - * selects nearest discrete clock frequency the SM501 can achive + * Calculates the nearest discrete clock frequency that can be + * achieved using the 288MHz and 336MHz PLLs. * the maximum divisor is 3 or 5 */ + static unsigned long sm501_select_clock(unsigned long freq, struct sm501_clock *clock, int max_div) { unsigned long mclk; - int divider; - int shift; - long diff; long best_diff = 999999999; /* Try 288MHz and 336MHz clocks. */ for (mclk = 288000000; mclk <= 336000000; mclk += 48000000) { - /* try dividers 1 and 3 for CRT and for panel, - try divider 5 for panel only.*/ - - for (divider = 1; divider <= max_div; divider += 2) { - /* try all 8 shift values.*/ - for (shift = 0; shift < 8; shift++) { - /* Calculate difference to requested clock */ - diff = sm501fb_round_div(mclk, divider << shift) - freq; - if (diff < 0) - diff = -diff; - - /* If it is less than the current, use it */ - if (diff < best_diff) { - best_diff = diff; - - clock->mclk = mclk; - clock->divider = divider; - clock->shift = shift; - } - } - } + sm501_calc_clock(freq, clock, max_div, mclk, &best_diff); } /* Return best clock. */ @@ -497,6 +541,7 @@ unsigned long sm501_set_clock(struct device *dev, unsigned long gate = readl(sm->regs + SM501_CURRENT_GATE); unsigned long clock = readl(sm->regs + SM501_CURRENT_CLOCK); unsigned char reg; + unsigned int pll_reg = 0; unsigned long sm501_freq; /* the actual frequency acheived */ struct sm501_clock to; @@ -511,14 +556,28 @@ unsigned long sm501_set_clock(struct device *dev, * requested frequency the value must be multiplied by * 2. This clock also has an additional pre divisor */ - sm501_freq = (sm501_select_clock(2 * req_freq, &to, 5) / 2); - reg=to.shift & 0x07;/* bottom 3 bits are shift */ - if (to.divider == 3) - reg |= 0x08; /* /3 divider required */ - else if (to.divider == 5) - reg |= 0x10; /* /5 divider required */ - if (to.mclk != 288000000) - reg |= 0x20; /* which mclk pll is source */ + if (sm->rev >= 0xC0) { + /* SM502 -> use the programmable PLL */ + sm501_freq = (sm501_calc_pll(2 * req_freq, + &to, 5) / 2); + reg = to.shift & 0x07;/* bottom 3 bits are shift */ + if (to.divider == 3) + reg |= 0x08; /* /3 divider required */ + else if (to.divider == 5) + reg |= 0x10; /* /5 divider required */ + reg |= 0x40; /* select the programmable PLL */ + pll_reg = 0x20000 | (to.k << 15) | (to.n << 8) | to.m; + } else { + sm501_freq = (sm501_select_clock(2 * req_freq, + &to, 5) / 2); + reg = to.shift & 0x07;/* bottom 3 bits are shift */ + if (to.divider == 3) + reg |= 0x08; /* /3 divider required */ + else if (to.divider == 5) + reg |= 0x10; /* /5 divider required */ + if (to.mclk != 288000000) + reg |= 0x20; /* which mclk pll is source */ + } break; case SM501_CLOCK_V2XCLK: @@ -579,6 +638,10 @@ unsigned long sm501_set_clock(struct device *dev, } writel(mode, sm->regs + SM501_POWER_MODE_CONTROL); + + if (pll_reg) + writel(pll_reg, sm->regs + SM501_PROGRAMMABLE_PLL_CONTROL); + sm501_sync_regs(sm); dev_info(sm->dev, "gate %08lx, clock %08lx, mode %08lx\n", @@ -599,15 +662,24 @@ EXPORT_SYMBOL_GPL(sm501_set_clock); * finds the closest available frequency for a given clock */ -unsigned long sm501_find_clock(int clksrc, +unsigned long sm501_find_clock(struct device *dev, + int clksrc, unsigned long req_freq) { + struct sm501_devdata *sm = dev_get_drvdata(dev); unsigned long sm501_freq; /* the frequency achiveable by the 501 */ struct sm501_clock to; switch (clksrc) { case SM501_CLOCK_P2XCLK: - sm501_freq = (sm501_select_clock(2 * req_freq, &to, 5) / 2); + if (sm->rev >= 0xC0) { + /* SM502 -> use the programmable PLL */ + sm501_freq = (sm501_calc_pll(2 * req_freq, + &to, 5) / 2); + } else { + sm501_freq = (sm501_select_clock(2 * req_freq, + &to, 5) / 2); + } break; case SM501_CLOCK_V2XCLK: @@ -914,6 +986,8 @@ static int sm501_init_dev(struct sm501_devdata *sm) dev_info(sm->dev, "SM501 At %p: Version %08lx, %ld Mb, IRQ %d\n", sm->regs, devid, (unsigned long)mem_avail >> 20, sm->irq); + sm->rev = devid & SM501_DEVICEID_REVMASK; + sm501_dump_gate(sm); ret = device_create_file(sm->dev, &dev_attr_dbg_regs); diff --git a/drivers/misc/thinkpad_acpi.c b/drivers/misc/thinkpad_acpi.c index bb269d0c677e..6cb781262f94 100644 --- a/drivers/misc/thinkpad_acpi.c +++ b/drivers/misc/thinkpad_acpi.c @@ -1078,7 +1078,8 @@ static int hotkey_get_tablet_mode(int *status) if (!acpi_evalf(hkey_handle, &s, "MHKG", "d")) return -EIO; - return ((s & TP_HOTKEY_TABLET_MASK) != 0); + *status = ((s & TP_HOTKEY_TABLET_MASK) != 0); + return 0; } /* diff --git a/drivers/misc/tifm_7xx1.c b/drivers/misc/tifm_7xx1.c index 63a089b29545..67503ea71d21 100644 --- a/drivers/misc/tifm_7xx1.c +++ b/drivers/misc/tifm_7xx1.c @@ -368,6 +368,8 @@ static int tifm_7xx1_probe(struct pci_dev *dev, goto err_out_irq; writel(TIFM_IRQ_ENABLE | TIFM_IRQ_SOCKMASK((1 << fm->num_sockets) - 1), + fm->addr + FM_CLEAR_INTERRUPT_ENABLE); + writel(TIFM_IRQ_ENABLE | TIFM_IRQ_SOCKMASK((1 << fm->num_sockets) - 1), fm->addr + FM_SET_INTERRUPT_ENABLE); return 0; diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c index 6ac81e35355c..275960462970 100644 --- a/drivers/mtd/ubi/build.c +++ b/drivers/mtd/ubi/build.c @@ -1000,8 +1000,8 @@ static int __init ubi_init(void) mutex_unlock(&ubi_devices_mutex); if (err < 0) { put_mtd_device(mtd); - printk(KERN_ERR "UBI error: cannot attach %s\n", - p->name); + printk(KERN_ERR "UBI error: cannot attach mtd%d\n", + mtd->index); goto out_detach; } } diff --git a/drivers/mtd/ubi/ubi.h b/drivers/mtd/ubi/ubi.h index 457710615261..a548c1d28fa8 100644 --- a/drivers/mtd/ubi/ubi.h +++ b/drivers/mtd/ubi/ubi.h @@ -217,11 +217,11 @@ struct ubi_volume { void *upd_buf; int *eba_tbl; - int checked:1; - int corrupted:1; - int upd_marker:1; - int updating:1; - int changing_leb:1; + unsigned int checked:1; + unsigned int corrupted:1; + unsigned int upd_marker:1; + unsigned int updating:1; + unsigned int changing_leb:1; #ifdef CONFIG_MTD_UBI_GLUEBI /* diff --git a/drivers/mtd/ubi/vmt.c b/drivers/mtd/ubi/vmt.c index a3ca2257e601..5be58d85c639 100644 --- a/drivers/mtd/ubi/vmt.c +++ b/drivers/mtd/ubi/vmt.c @@ -376,7 +376,9 @@ out_sysfs: get_device(&vol->dev); volume_sysfs_close(vol); out_gluebi: - ubi_destroy_gluebi(vol); + if (ubi_destroy_gluebi(vol)) + dbg_err("cannot destroy gluebi for volume %d:%d", + ubi->ubi_num, vol_id); out_cdev: cdev_del(&vol->cdev); out_mapping: diff --git a/drivers/mtd/ubi/vtbl.c b/drivers/mtd/ubi/vtbl.c index 56fc3fbce838..af36b12be278 100644 --- a/drivers/mtd/ubi/vtbl.c +++ b/drivers/mtd/ubi/vtbl.c @@ -519,6 +519,7 @@ static int init_volumes(struct ubi_device *ubi, const struct ubi_scan_info *si, if (ubi->autoresize_vol_id != -1) { ubi_err("more then one auto-resize volume (%d " "and %d)", ubi->autoresize_vol_id, i); + kfree(vol); return -EINVAL; } diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index f337800076c0..fe7b5ec09708 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -90,6 +90,11 @@ config MACVLAN This allows one to create virtual interfaces that map packets to or from specific MAC addresses to a particular interface. + Macvlan devices can be added using the "ip" command from the + iproute2 package starting with the iproute2-2.6.23 release: + + "ip link add link <real dev> [ address MAC ] [ NAME ] type macvlan" + To compile this driver as a module, choose M here: the module will be called macvlan. @@ -2361,14 +2366,15 @@ config GELIC_NET module will be called ps3_gelic. config GELIC_WIRELESS - bool "PS3 Wireless support" - depends on GELIC_NET - help - This option adds the support for the wireless feature of PS3. - If you have the wireless-less model of PS3 or have no plan to - use wireless feature, disabling this option saves memory. As - the driver automatically distinguishes the models, you can - safely enable this option even if you have a wireless-less model. + bool "PS3 Wireless support" + depends on GELIC_NET + select WIRELESS_EXT + help + This option adds the support for the wireless feature of PS3. + If you have the wireless-less model of PS3 or have no plan to + use wireless feature, disabling this option saves memory. As + the driver automatically distinguishes the models, you can + safely enable this option even if you have a wireless-less model. config GIANFAR tristate "Gianfar Ethernet" @@ -2513,7 +2519,7 @@ config CHELSIO_T3 config EHEA tristate "eHEA Ethernet support" - depends on IBMEBUS && INET + depends on IBMEBUS && INET && SPARSEMEM select INET_LRO ---help--- This driver supports the IBM pSeries eHEA ethernet adapter. diff --git a/drivers/net/ac3200.c b/drivers/net/ac3200.c index 5136d94923aa..b1448637107f 100644 --- a/drivers/net/ac3200.c +++ b/drivers/net/ac3200.c @@ -369,7 +369,7 @@ MODULE_PARM_DESC(mem, "Memory base address(es)"); MODULE_DESCRIPTION("Ansel AC3200 EISA ethernet driver"); MODULE_LICENSE("GPL"); -int __init init_module(void) +static int __init ac3200_module_init(void) { struct net_device *dev; int this_dev, found = 0; @@ -404,8 +404,7 @@ static void cleanup_card(struct net_device *dev) iounmap(ei_status.mem); } -void __exit -cleanup_module(void) +static void __exit ac3200_module_exit(void) { int this_dev; @@ -418,4 +417,6 @@ cleanup_module(void) } } } +module_init(ac3200_module_init); +module_exit(ac3200_module_exit); #endif /* MODULE */ diff --git a/drivers/net/apne.c b/drivers/net/apne.c index c12cbdf368b1..47a8275d3962 100644 --- a/drivers/net/apne.c +++ b/drivers/net/apne.c @@ -569,7 +569,7 @@ static irqreturn_t apne_interrupt(int irq, void *dev_id) #ifdef MODULE static struct net_device *apne_dev; -int __init init_module(void) +static int __init apne_module_init(void) { apne_dev = apne_probe(-1); if (IS_ERR(apne_dev)) @@ -577,7 +577,7 @@ int __init init_module(void) return 0; } -void __exit cleanup_module(void) +static void __exit apne_module_exit(void) { unregister_netdev(apne_dev); @@ -591,7 +591,8 @@ void __exit cleanup_module(void) free_netdev(apne_dev); } - +module_init(apne_module_init); +module_exit(apne_module_exit); #endif static int init_pcmcia(void) diff --git a/drivers/net/appletalk/ltpc.c b/drivers/net/appletalk/ltpc.c index 6ab2c2d4d673..fef5560bc7a2 100644 --- a/drivers/net/appletalk/ltpc.c +++ b/drivers/net/appletalk/ltpc.c @@ -1252,7 +1252,7 @@ module_param(irq, int, 0); module_param(dma, int, 0); -int __init init_module(void) +static int __init ltpc_module_init(void) { if(io == 0) printk(KERN_NOTICE @@ -1263,6 +1263,7 @@ int __init init_module(void) return PTR_ERR(dev_ltpc); return 0; } +module_init(ltpc_module_init); #endif static void __exit ltpc_cleanup(void) diff --git a/drivers/net/arcnet/capmode.c b/drivers/net/arcnet/capmode.c index cc4610db6395..02cb8f1c1148 100644 --- a/drivers/net/arcnet/capmode.c +++ b/drivers/net/arcnet/capmode.c @@ -80,17 +80,19 @@ void arcnet_cap_init(void) #ifdef MODULE -int __init init_module(void) +static int __init capmode_module_init(void) { printk(VERSION); arcnet_cap_init(); return 0; } -void cleanup_module(void) +static void __exit capmode_module_exit(void) { arcnet_unregister_proto(&capmode_proto); } +module_init(capmode_module_init); +module_exit(capmode_module_exit); MODULE_LICENSE("GPL"); #endif /* MODULE */ diff --git a/drivers/net/atarilance.c b/drivers/net/atarilance.c index b74dbeef8050..13c293b286de 100644 --- a/drivers/net/atarilance.c +++ b/drivers/net/atarilance.c @@ -336,8 +336,6 @@ struct lance_addr { /***************************** Prototypes *****************************/ -static int addr_accessible( volatile void *regp, int wordflag, int - writeflag ); static unsigned long lance_probe1( struct net_device *dev, struct lance_addr *init_rec ); static int lance_open( struct net_device *dev ); @@ -406,7 +404,8 @@ struct net_device * __init atarilance_probe(int unit) /* Derived from hwreg_present() in atari/config.c: */ -static int __init addr_accessible( volatile void *regp, int wordflag, int writeflag ) +static noinline int __init addr_accessible(volatile void *regp, int wordflag, + int writeflag) { int ret; long flags; diff --git a/drivers/net/bnx2x.c b/drivers/net/bnx2x.c index afc7f34b1dcf..8af142ccf373 100644 --- a/drivers/net/bnx2x.c +++ b/drivers/net/bnx2x.c @@ -1,6 +1,6 @@ /* bnx2x.c: Broadcom Everest network driver. * - * Copyright (c) 2007 Broadcom Corporation + * Copyright (c) 2007-2008 Broadcom Corporation * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -10,13 +10,13 @@ * Based on code from Michael Chan's bnx2 driver * UDP CSUM errata workaround by Arik Gendelman * Slowpath rework by Vladislav Zolotarov - * Statistics and Link managment by Yitchak Gertner + * Statistics and Link management by Yitchak Gertner * */ /* define this to make the driver freeze on error * to allow getting debug info - * (you will need to reboot afterwords) + * (you will need to reboot afterwards) */ /*#define BNX2X_STOP_ON_ERROR*/ @@ -63,22 +63,21 @@ #include "bnx2x.h" #include "bnx2x_init.h" -#define DRV_MODULE_VERSION "0.40.15" -#define DRV_MODULE_RELDATE "$DateTime: 2007/11/15 07:28:37 $" -#define BNX2X_BC_VER 0x040009 +#define DRV_MODULE_VERSION "1.40.22" +#define DRV_MODULE_RELDATE "2007/11/27" +#define BNX2X_BC_VER 0x040200 /* Time in jiffies before concluding the transmitter is hung. */ #define TX_TIMEOUT (5*HZ) static char version[] __devinitdata = - "Broadcom NetXtreme II 577xx 10Gigabit Ethernet Driver " + "Broadcom NetXtreme II 5771X 10Gigabit Ethernet Driver " DRV_MODULE_NAME " " DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n"; MODULE_AUTHOR("Eliezer Tamir <eliezert@broadcom.com>"); MODULE_DESCRIPTION("Broadcom NetXtreme II BCM57710 Driver"); MODULE_LICENSE("GPL"); MODULE_VERSION(DRV_MODULE_VERSION); -MODULE_INFO(cvs_version, "$Revision: #356 $"); static int use_inta; static int poll; @@ -94,8 +93,8 @@ module_param(debug, int, 0); MODULE_PARM_DESC(use_inta, "use INT#A instead of MSI-X"); MODULE_PARM_DESC(poll, "use polling (for debug)"); MODULE_PARM_DESC(onefunc, "enable only first function"); -MODULE_PARM_DESC(nomcp, "ignore managment CPU (Implies onefunc)"); -MODULE_PARM_DESC(debug, "defualt debug msglevel"); +MODULE_PARM_DESC(nomcp, "ignore management CPU (Implies onefunc)"); +MODULE_PARM_DESC(debug, "default debug msglevel"); #ifdef BNX2X_MULTI module_param(use_multi, int, 0); @@ -298,8 +297,7 @@ static void bnx2x_read_dmae(struct bnx2x *bp, u32 src_addr, u32 len32) static int bnx2x_mc_assert(struct bnx2x *bp) { - int i, j; - int rc = 0; + int i, j, rc = 0; char last_idx; const char storm[] = {"XTCU"}; const u32 intmem_base[] = { @@ -313,8 +311,9 @@ static int bnx2x_mc_assert(struct bnx2x *bp) for (i = 0; i < 4; i++) { last_idx = REG_RD8(bp, XSTORM_ASSERT_LIST_INDEX_OFFSET + intmem_base[i]); - BNX2X_ERR("DATA %cSTORM_ASSERT_LIST_INDEX 0x%x\n", - storm[i], last_idx); + if (last_idx) + BNX2X_LOG("DATA %cSTORM_ASSERT_LIST_INDEX 0x%x\n", + storm[i], last_idx); /* print the asserts */ for (j = 0; j < STROM_ASSERT_ARRAY_SIZE; j++) { @@ -330,7 +329,7 @@ static int bnx2x_mc_assert(struct bnx2x *bp) intmem_base[i]); if (row0 != COMMON_ASM_INVALID_ASSERT_OPCODE) { - BNX2X_ERR("DATA %cSTORM_ASSERT_INDEX 0x%x =" + BNX2X_LOG("DATA %cSTORM_ASSERT_INDEX 0x%x =" " 0x%08x 0x%08x 0x%08x 0x%08x\n", storm[i], j, row3, row2, row1, row0); rc++; @@ -341,6 +340,7 @@ static int bnx2x_mc_assert(struct bnx2x *bp) } return rc; } + static void bnx2x_fw_dump(struct bnx2x *bp) { u32 mark, offset; @@ -348,21 +348,22 @@ static void bnx2x_fw_dump(struct bnx2x *bp) int word; mark = REG_RD(bp, MCP_REG_MCPR_SCRATCH + 0xf104); - printk(KERN_ERR PFX "begin fw dump (mark 0x%x)\n", mark); + mark = ((mark + 0x3) & ~0x3); + printk(KERN_ERR PFX "begin fw dump (mark 0x%x)\n" KERN_ERR, mark); for (offset = mark - 0x08000000; offset <= 0xF900; offset += 0x8*4) { for (word = 0; word < 8; word++) data[word] = htonl(REG_RD(bp, MCP_REG_MCPR_SCRATCH + offset + 4*word)); data[8] = 0x0; - printk(KERN_ERR PFX "%s", (char *)data); + printk(KERN_CONT "%s", (char *)data); } for (offset = 0xF108; offset <= mark - 0x08000000; offset += 0x8*4) { for (word = 0; word < 8; word++) data[word] = htonl(REG_RD(bp, MCP_REG_MCPR_SCRATCH + offset + 4*word)); data[8] = 0x0; - printk(KERN_ERR PFX "%s", (char *)data); + printk(KERN_CONT "%s", (char *)data); } printk("\n" KERN_ERR PFX "end of fw dump\n"); } @@ -427,10 +428,10 @@ static void bnx2x_panic_dump(struct bnx2x *bp) } } - BNX2X_ERR("def_c_idx(%u) def_u_idx(%u) def_t_idx(%u)" - " def_x_idx(%u) def_att_idx(%u) attn_state(%u)" + BNX2X_ERR("def_c_idx(%u) def_u_idx(%u) def_x_idx(%u)" + " def_t_idx(%u) def_att_idx(%u) attn_state(%u)" " spq_prod_idx(%u)\n", - bp->def_c_idx, bp->def_u_idx, bp->def_t_idx, bp->def_x_idx, + bp->def_c_idx, bp->def_u_idx, bp->def_x_idx, bp->def_t_idx, bp->def_att_idx, bp->attn_state, bp->spq_prod_idx); @@ -441,7 +442,7 @@ static void bnx2x_panic_dump(struct bnx2x *bp) DP(BNX2X_MSG_STATS, "stats_state - DISABLE\n"); } -static void bnx2x_enable_int(struct bnx2x *bp) +static void bnx2x_int_enable(struct bnx2x *bp) { int port = bp->port; u32 addr = port ? HC_REG_CONFIG_1 : HC_REG_CONFIG_0; @@ -454,18 +455,26 @@ static void bnx2x_enable_int(struct bnx2x *bp) HC_CONFIG_0_REG_ATTN_BIT_EN_0); } else { val |= (HC_CONFIG_0_REG_SINGLE_ISR_EN_0 | + HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 | HC_CONFIG_0_REG_INT_LINE_EN_0 | HC_CONFIG_0_REG_ATTN_BIT_EN_0); + + /* Errata A0.158 workaround */ + DP(NETIF_MSG_INTR, "write %x to HC %d (addr 0x%x) MSI-X %d\n", + val, port, addr, msix); + + REG_WR(bp, addr, val); + val &= ~HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0; } - DP(NETIF_MSG_INTR, "write %x to HC %d (addr 0x%x) msi %d\n", + DP(NETIF_MSG_INTR, "write %x to HC %d (addr 0x%x) MSI-X %d\n", val, port, addr, msix); REG_WR(bp, addr, val); } -static void bnx2x_disable_int(struct bnx2x *bp) +static void bnx2x_int_disable(struct bnx2x *bp) { int port = bp->port; u32 addr = port ? HC_REG_CONFIG_1 : HC_REG_CONFIG_0; @@ -484,15 +493,15 @@ static void bnx2x_disable_int(struct bnx2x *bp) BNX2X_ERR("BUG! proper val not read from IGU!\n"); } -static void bnx2x_disable_int_sync(struct bnx2x *bp) +static void bnx2x_int_disable_sync(struct bnx2x *bp) { int msix = (bp->flags & USING_MSIX_FLAG) ? 1 : 0; int i; atomic_inc(&bp->intr_sem); - /* prevent the HW from sending interrupts*/ - bnx2x_disable_int(bp); + /* prevent the HW from sending interrupts */ + bnx2x_int_disable(bp); /* make sure all ISRs are done */ if (msix) { @@ -775,6 +784,7 @@ static void bnx2x_sp_event(struct bnx2x_fastpath *fp, mb(); /* force bnx2x_wait_ramrod to see the change */ return; } + switch (command | bp->state) { case (RAMROD_CMD_ID_ETH_PORT_SETUP | BNX2X_STATE_OPENING_WAIT4_PORT): DP(NETIF_MSG_IFUP, "got setup ramrod\n"); @@ -787,20 +797,20 @@ static void bnx2x_sp_event(struct bnx2x_fastpath *fp, fp->state = BNX2X_FP_STATE_HALTED; break; - case (RAMROD_CMD_ID_ETH_PORT_DEL | BNX2X_STATE_CLOSING_WAIT4_DELETE): - DP(NETIF_MSG_IFDOWN, "got delete ramrod\n"); - bp->state = BNX2X_STATE_CLOSING_WAIT4_UNLOAD; - break; - case (RAMROD_CMD_ID_ETH_CFC_DEL | BNX2X_STATE_CLOSING_WAIT4_HALT): - DP(NETIF_MSG_IFDOWN, "got delete ramrod for MULTI[%d]\n", cid); - bnx2x_fp(bp, cid, state) = BNX2X_FP_STATE_DELETED; + DP(NETIF_MSG_IFDOWN, "got delete ramrod for MULTI[%d]\n", + cid); + bnx2x_fp(bp, cid, state) = BNX2X_FP_STATE_CLOSED; break; case (RAMROD_CMD_ID_ETH_SET_MAC | BNX2X_STATE_OPEN): DP(NETIF_MSG_IFUP, "got set mac ramrod\n"); break; + case (RAMROD_CMD_ID_ETH_SET_MAC | BNX2X_STATE_CLOSING_WAIT4_HALT): + DP(NETIF_MSG_IFUP, "got (un)set mac ramrod\n"); + break; + default: BNX2X_ERR("unexpected ramrod (%d) state is %x\n", command, bp->state); @@ -1179,12 +1189,175 @@ static u32 bnx2x_bits_dis(struct bnx2x *bp, u32 reg, u32 bits) return val; } +static int bnx2x_hw_lock(struct bnx2x *bp, u32 resource) +{ + u32 cnt; + u32 lock_status; + u32 resource_bit = (1 << resource); + u8 func = bp->port; + + /* Validating that the resource is within range */ + if (resource > HW_LOCK_MAX_RESOURCE_VALUE) { + DP(NETIF_MSG_HW, + "resource(0x%x) > HW_LOCK_MAX_RESOURCE_VALUE(0x%x)\n", + resource, HW_LOCK_MAX_RESOURCE_VALUE); + return -EINVAL; + } + + /* Validating that the resource is not already taken */ + lock_status = REG_RD(bp, MISC_REG_DRIVER_CONTROL_1 + func*8); + if (lock_status & resource_bit) { + DP(NETIF_MSG_HW, "lock_status 0x%x resource_bit 0x%x\n", + lock_status, resource_bit); + return -EEXIST; + } + + /* Try for 1 second every 5ms */ + for (cnt = 0; cnt < 200; cnt++) { + /* Try to acquire the lock */ + REG_WR(bp, MISC_REG_DRIVER_CONTROL_1 + func*8 + 4, + resource_bit); + lock_status = REG_RD(bp, MISC_REG_DRIVER_CONTROL_1 + func*8); + if (lock_status & resource_bit) + return 0; + + msleep(5); + } + DP(NETIF_MSG_HW, "Timeout\n"); + return -EAGAIN; +} + +static int bnx2x_hw_unlock(struct bnx2x *bp, u32 resource) +{ + u32 lock_status; + u32 resource_bit = (1 << resource); + u8 func = bp->port; + + /* Validating that the resource is within range */ + if (resource > HW_LOCK_MAX_RESOURCE_VALUE) { + DP(NETIF_MSG_HW, + "resource(0x%x) > HW_LOCK_MAX_RESOURCE_VALUE(0x%x)\n", + resource, HW_LOCK_MAX_RESOURCE_VALUE); + return -EINVAL; + } + + /* Validating that the resource is currently taken */ + lock_status = REG_RD(bp, MISC_REG_DRIVER_CONTROL_1 + func*8); + if (!(lock_status & resource_bit)) { + DP(NETIF_MSG_HW, "lock_status 0x%x resource_bit 0x%x\n", + lock_status, resource_bit); + return -EFAULT; + } + + REG_WR(bp, MISC_REG_DRIVER_CONTROL_1 + func*8, resource_bit); + return 0; +} + +static int bnx2x_set_gpio(struct bnx2x *bp, int gpio_num, u32 mode) +{ + /* The GPIO should be swapped if swap register is set and active */ + int gpio_port = (REG_RD(bp, NIG_REG_PORT_SWAP) && + REG_RD(bp, NIG_REG_STRAP_OVERRIDE)) ^ bp->port; + int gpio_shift = gpio_num + + (gpio_port ? MISC_REGISTERS_GPIO_PORT_SHIFT : 0); + u32 gpio_mask = (1 << gpio_shift); + u32 gpio_reg; + + if (gpio_num > MISC_REGISTERS_GPIO_3) { + BNX2X_ERR("Invalid GPIO %d\n", gpio_num); + return -EINVAL; + } + + bnx2x_hw_lock(bp, HW_LOCK_RESOURCE_GPIO); + /* read GPIO and mask except the float bits */ + gpio_reg = (REG_RD(bp, MISC_REG_GPIO) & MISC_REGISTERS_GPIO_FLOAT); + + switch (mode) { + case MISC_REGISTERS_GPIO_OUTPUT_LOW: + DP(NETIF_MSG_LINK, "Set GPIO %d (shift %d) -> output low\n", + gpio_num, gpio_shift); + /* clear FLOAT and set CLR */ + gpio_reg &= ~(gpio_mask << MISC_REGISTERS_GPIO_FLOAT_POS); + gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_CLR_POS); + break; + + case MISC_REGISTERS_GPIO_OUTPUT_HIGH: + DP(NETIF_MSG_LINK, "Set GPIO %d (shift %d) -> output high\n", + gpio_num, gpio_shift); + /* clear FLOAT and set SET */ + gpio_reg &= ~(gpio_mask << MISC_REGISTERS_GPIO_FLOAT_POS); + gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_SET_POS); + break; + + case MISC_REGISTERS_GPIO_INPUT_HI_Z : + DP(NETIF_MSG_LINK, "Set GPIO %d (shift %d) -> input\n", + gpio_num, gpio_shift); + /* set FLOAT */ + gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_FLOAT_POS); + break; + + default: + break; + } + + REG_WR(bp, MISC_REG_GPIO, gpio_reg); + bnx2x_hw_unlock(bp, HW_LOCK_RESOURCE_GPIO); + + return 0; +} + +static int bnx2x_set_spio(struct bnx2x *bp, int spio_num, u32 mode) +{ + u32 spio_mask = (1 << spio_num); + u32 spio_reg; + + if ((spio_num < MISC_REGISTERS_SPIO_4) || + (spio_num > MISC_REGISTERS_SPIO_7)) { + BNX2X_ERR("Invalid SPIO %d\n", spio_num); + return -EINVAL; + } + + bnx2x_hw_lock(bp, HW_LOCK_RESOURCE_SPIO); + /* read SPIO and mask except the float bits */ + spio_reg = (REG_RD(bp, MISC_REG_SPIO) & MISC_REGISTERS_SPIO_FLOAT); + + switch (mode) { + case MISC_REGISTERS_SPIO_OUTPUT_LOW : + DP(NETIF_MSG_LINK, "Set SPIO %d -> output low\n", spio_num); + /* clear FLOAT and set CLR */ + spio_reg &= ~(spio_mask << MISC_REGISTERS_SPIO_FLOAT_POS); + spio_reg |= (spio_mask << MISC_REGISTERS_SPIO_CLR_POS); + break; + + case MISC_REGISTERS_SPIO_OUTPUT_HIGH : + DP(NETIF_MSG_LINK, "Set SPIO %d -> output high\n", spio_num); + /* clear FLOAT and set SET */ + spio_reg &= ~(spio_mask << MISC_REGISTERS_SPIO_FLOAT_POS); + spio_reg |= (spio_mask << MISC_REGISTERS_SPIO_SET_POS); + break; + + case MISC_REGISTERS_SPIO_INPUT_HI_Z: + DP(NETIF_MSG_LINK, "Set SPIO %d -> input\n", spio_num); + /* set FLOAT */ + spio_reg |= (spio_mask << MISC_REGISTERS_SPIO_FLOAT_POS); + break; + + default: + break; + } + + REG_WR(bp, MISC_REG_SPIO, spio_reg); + bnx2x_hw_unlock(bp, HW_LOCK_RESOURCE_SPIO); + + return 0; +} + static int bnx2x_mdio22_write(struct bnx2x *bp, u32 reg, u32 val) { - int rc; - u32 tmp, i; int port = bp->port; u32 emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0; + u32 tmp; + int i, rc; /* DP(NETIF_MSG_HW, "phy_addr 0x%x reg 0x%x val 0x%08x\n", bp->phy_addr, reg, val); */ @@ -1236,8 +1409,8 @@ static int bnx2x_mdio22_read(struct bnx2x *bp, u32 reg, u32 *ret_val) { int port = bp->port; u32 emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0; - u32 val, i; - int rc; + u32 val; + int i, rc; if (bp->phy_flags & PHY_INT_MODE_AUTO_POLLING_FLAG) { @@ -1286,58 +1459,54 @@ static int bnx2x_mdio22_read(struct bnx2x *bp, u32 reg, u32 *ret_val) return rc; } -static int bnx2x_mdio45_write(struct bnx2x *bp, u32 reg, u32 addr, u32 val) +static int bnx2x_mdio45_ctrl_write(struct bnx2x *bp, u32 mdio_ctrl, + u32 phy_addr, u32 reg, u32 addr, u32 val) { - int rc = 0; - u32 tmp, i; - int port = bp->port; - u32 emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0; - - if (bp->phy_flags & PHY_INT_MODE_AUTO_POLLING_FLAG) { - - tmp = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE); - tmp &= ~EMAC_MDIO_MODE_AUTO_POLL; - EMAC_WR(EMAC_REG_EMAC_MDIO_MODE, tmp); - REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE); - udelay(40); - } + u32 tmp; + int i, rc = 0; - /* set clause 45 mode */ - tmp = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE); - tmp |= EMAC_MDIO_MODE_CLAUSE_45; - EMAC_WR(EMAC_REG_EMAC_MDIO_MODE, tmp); + /* set clause 45 mode, slow down the MDIO clock to 2.5MHz + * (a value of 49==0x31) and make sure that the AUTO poll is off + */ + tmp = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE); + tmp &= ~(EMAC_MDIO_MODE_AUTO_POLL | EMAC_MDIO_MODE_CLOCK_CNT); + tmp |= (EMAC_MDIO_MODE_CLAUSE_45 | + (49 << EMAC_MDIO_MODE_CLOCK_CNT_BITSHIFT)); + REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE, tmp); + REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE); + udelay(40); /* address */ - tmp = ((bp->phy_addr << 21) | (reg << 16) | addr | + tmp = ((phy_addr << 21) | (reg << 16) | addr | EMAC_MDIO_COMM_COMMAND_ADDRESS | EMAC_MDIO_COMM_START_BUSY); - EMAC_WR(EMAC_REG_EMAC_MDIO_COMM, tmp); + REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM, tmp); for (i = 0; i < 50; i++) { udelay(10); - tmp = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_COMM); + tmp = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM); if (!(tmp & EMAC_MDIO_COMM_START_BUSY)) { udelay(5); break; } } - if (tmp & EMAC_MDIO_COMM_START_BUSY) { BNX2X_ERR("write phy register failed\n"); rc = -EBUSY; + } else { /* data */ - tmp = ((bp->phy_addr << 21) | (reg << 16) | val | + tmp = ((phy_addr << 21) | (reg << 16) | val | EMAC_MDIO_COMM_COMMAND_WRITE_45 | EMAC_MDIO_COMM_START_BUSY); - EMAC_WR(EMAC_REG_EMAC_MDIO_COMM, tmp); + REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM, tmp); for (i = 0; i < 50; i++) { udelay(10); - tmp = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_COMM); + tmp = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM); if (!(tmp & EMAC_MDIO_COMM_START_BUSY)) { udelay(5); break; @@ -1351,75 +1520,78 @@ static int bnx2x_mdio45_write(struct bnx2x *bp, u32 reg, u32 addr, u32 val) } } - /* unset clause 45 mode */ - tmp = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE); - tmp &= ~EMAC_MDIO_MODE_CLAUSE_45; - EMAC_WR(EMAC_REG_EMAC_MDIO_MODE, tmp); - - if (bp->phy_flags & PHY_INT_MODE_AUTO_POLLING_FLAG) { - - tmp = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE); + /* unset clause 45 mode, set the MDIO clock to a faster value + * (0x13 => 6.25Mhz) and restore the AUTO poll if needed + */ + tmp = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE); + tmp &= ~(EMAC_MDIO_MODE_CLAUSE_45 | EMAC_MDIO_MODE_CLOCK_CNT); + tmp |= (0x13 << EMAC_MDIO_MODE_CLOCK_CNT_BITSHIFT); + if (bp->phy_flags & PHY_INT_MODE_AUTO_POLLING_FLAG) tmp |= EMAC_MDIO_MODE_AUTO_POLL; - EMAC_WR(EMAC_REG_EMAC_MDIO_MODE, tmp); - } + REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE, tmp); return rc; } -static int bnx2x_mdio45_read(struct bnx2x *bp, u32 reg, u32 addr, - u32 *ret_val) +static int bnx2x_mdio45_write(struct bnx2x *bp, u32 phy_addr, u32 reg, + u32 addr, u32 val) { - int port = bp->port; - u32 emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0; - u32 val, i; - int rc = 0; + u32 emac_base = bp->port ? GRCBASE_EMAC1 : GRCBASE_EMAC0; - if (bp->phy_flags & PHY_INT_MODE_AUTO_POLLING_FLAG) { + return bnx2x_mdio45_ctrl_write(bp, emac_base, phy_addr, + reg, addr, val); +} - val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE); - val &= ~EMAC_MDIO_MODE_AUTO_POLL; - EMAC_WR(EMAC_REG_EMAC_MDIO_MODE, val); - REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE); - udelay(40); - } +static int bnx2x_mdio45_ctrl_read(struct bnx2x *bp, u32 mdio_ctrl, + u32 phy_addr, u32 reg, u32 addr, + u32 *ret_val) +{ + u32 val; + int i, rc = 0; - /* set clause 45 mode */ - val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE); - val |= EMAC_MDIO_MODE_CLAUSE_45; - EMAC_WR(EMAC_REG_EMAC_MDIO_MODE, val); + /* set clause 45 mode, slow down the MDIO clock to 2.5MHz + * (a value of 49==0x31) and make sure that the AUTO poll is off + */ + val = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE); + val &= ~(EMAC_MDIO_MODE_AUTO_POLL | EMAC_MDIO_MODE_CLOCK_CNT); + val |= (EMAC_MDIO_MODE_CLAUSE_45 | + (49 << EMAC_MDIO_MODE_CLOCK_CNT_BITSHIFT)); + REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE, val); + REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE); + udelay(40); /* address */ - val = ((bp->phy_addr << 21) | (reg << 16) | addr | + val = ((phy_addr << 21) | (reg << 16) | addr | EMAC_MDIO_COMM_COMMAND_ADDRESS | EMAC_MDIO_COMM_START_BUSY); - EMAC_WR(EMAC_REG_EMAC_MDIO_COMM, val); + REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM, val); for (i = 0; i < 50; i++) { udelay(10); - val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_COMM); + val = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM); if (!(val & EMAC_MDIO_COMM_START_BUSY)) { udelay(5); break; } } - if (val & EMAC_MDIO_COMM_START_BUSY) { BNX2X_ERR("read phy register failed\n"); *ret_val = 0; rc = -EBUSY; + } else { /* data */ - val = ((bp->phy_addr << 21) | (reg << 16) | + val = ((phy_addr << 21) | (reg << 16) | EMAC_MDIO_COMM_COMMAND_READ_45 | EMAC_MDIO_COMM_START_BUSY); - EMAC_WR(EMAC_REG_EMAC_MDIO_COMM, val); + REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM, val); for (i = 0; i < 50; i++) { udelay(10); - val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_COMM); + val = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM); if (!(val & EMAC_MDIO_COMM_START_BUSY)) { val &= EMAC_MDIO_COMM_DATA; break; @@ -1436,31 +1608,39 @@ static int bnx2x_mdio45_read(struct bnx2x *bp, u32 reg, u32 addr, *ret_val = val; } - /* unset clause 45 mode */ - val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE); - val &= ~EMAC_MDIO_MODE_CLAUSE_45; - EMAC_WR(EMAC_REG_EMAC_MDIO_MODE, val); - - if (bp->phy_flags & PHY_INT_MODE_AUTO_POLLING_FLAG) { - - val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE); + /* unset clause 45 mode, set the MDIO clock to a faster value + * (0x13 => 6.25Mhz) and restore the AUTO poll if needed + */ + val = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE); + val &= ~(EMAC_MDIO_MODE_CLAUSE_45 | EMAC_MDIO_MODE_CLOCK_CNT); + val |= (0x13 << EMAC_MDIO_MODE_CLOCK_CNT_BITSHIFT); + if (bp->phy_flags & PHY_INT_MODE_AUTO_POLLING_FLAG) val |= EMAC_MDIO_MODE_AUTO_POLL; - EMAC_WR(EMAC_REG_EMAC_MDIO_MODE, val); - } + REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE, val); return rc; } -static int bnx2x_mdio45_vwrite(struct bnx2x *bp, u32 reg, u32 addr, u32 val) +static int bnx2x_mdio45_read(struct bnx2x *bp, u32 phy_addr, u32 reg, + u32 addr, u32 *ret_val) +{ + u32 emac_base = bp->port ? GRCBASE_EMAC1 : GRCBASE_EMAC0; + + return bnx2x_mdio45_ctrl_read(bp, emac_base, phy_addr, + reg, addr, ret_val); +} + +static int bnx2x_mdio45_vwrite(struct bnx2x *bp, u32 phy_addr, u32 reg, + u32 addr, u32 val) { int i; u32 rd_val; might_sleep(); for (i = 0; i < 10; i++) { - bnx2x_mdio45_write(bp, reg, addr, val); + bnx2x_mdio45_write(bp, phy_addr, reg, addr, val); msleep(5); - bnx2x_mdio45_read(bp, reg, addr, &rd_val); + bnx2x_mdio45_read(bp, phy_addr, reg, addr, &rd_val); /* if the read value is not the same as the value we wrote, we should write it again */ if (rd_val == val) @@ -1471,18 +1651,81 @@ static int bnx2x_mdio45_vwrite(struct bnx2x *bp, u32 reg, u32 addr, u32 val) } /* - * link managment + * link management */ +static void bnx2x_pause_resolve(struct bnx2x *bp, u32 pause_result) +{ + switch (pause_result) { /* ASYM P ASYM P */ + case 0xb: /* 1 0 1 1 */ + bp->flow_ctrl = FLOW_CTRL_TX; + break; + + case 0xe: /* 1 1 1 0 */ + bp->flow_ctrl = FLOW_CTRL_RX; + break; + + case 0x5: /* 0 1 0 1 */ + case 0x7: /* 0 1 1 1 */ + case 0xd: /* 1 1 0 1 */ + case 0xf: /* 1 1 1 1 */ + bp->flow_ctrl = FLOW_CTRL_BOTH; + break; + + default: + break; + } +} + +static u8 bnx2x_ext_phy_resove_fc(struct bnx2x *bp) +{ + u32 ext_phy_addr; + u32 ld_pause; /* local */ + u32 lp_pause; /* link partner */ + u32 an_complete; /* AN complete */ + u32 pause_result; + u8 ret = 0; + + ext_phy_addr = ((bp->ext_phy_config & + PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >> + PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT); + + /* read twice */ + bnx2x_mdio45_read(bp, ext_phy_addr, + EXT_PHY_KR_AUTO_NEG_DEVAD, + EXT_PHY_KR_STATUS, &an_complete); + bnx2x_mdio45_read(bp, ext_phy_addr, + EXT_PHY_KR_AUTO_NEG_DEVAD, + EXT_PHY_KR_STATUS, &an_complete); + + if (an_complete & EXT_PHY_KR_AUTO_NEG_COMPLETE) { + ret = 1; + bnx2x_mdio45_read(bp, ext_phy_addr, + EXT_PHY_KR_AUTO_NEG_DEVAD, + EXT_PHY_KR_AUTO_NEG_ADVERT, &ld_pause); + bnx2x_mdio45_read(bp, ext_phy_addr, + EXT_PHY_KR_AUTO_NEG_DEVAD, + EXT_PHY_KR_LP_AUTO_NEG, &lp_pause); + pause_result = (ld_pause & + EXT_PHY_KR_AUTO_NEG_ADVERT_PAUSE_MASK) >> 8; + pause_result |= (lp_pause & + EXT_PHY_KR_AUTO_NEG_ADVERT_PAUSE_MASK) >> 10; + DP(NETIF_MSG_LINK, "Ext PHY pause result 0x%x \n", + pause_result); + bnx2x_pause_resolve(bp, pause_result); + } + return ret; +} + static void bnx2x_flow_ctrl_resolve(struct bnx2x *bp, u32 gp_status) { - u32 ld_pause; /* local driver */ - u32 lp_pause; /* link partner */ + u32 ld_pause; /* local driver */ + u32 lp_pause; /* link partner */ u32 pause_result; bp->flow_ctrl = 0; - /* reolve from gp_status in case of AN complete and not sgmii */ + /* resolve from gp_status in case of AN complete and not sgmii */ if ((bp->req_autoneg & AUTONEG_FLOW_CTRL) && (gp_status & MDIO_AN_CL73_OR_37_COMPLETE) && (!(bp->phy_flags & PHY_SGMII_FLAG)) && @@ -1499,45 +1742,57 @@ static void bnx2x_flow_ctrl_resolve(struct bnx2x *bp, u32 gp_status) pause_result |= (lp_pause & MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_MASK)>>7; DP(NETIF_MSG_LINK, "pause_result 0x%x\n", pause_result); + bnx2x_pause_resolve(bp, pause_result); + } else if (!(bp->req_autoneg & AUTONEG_FLOW_CTRL) || + !(bnx2x_ext_phy_resove_fc(bp))) { + /* forced speed */ + if (bp->req_autoneg & AUTONEG_FLOW_CTRL) { + switch (bp->req_flow_ctrl) { + case FLOW_CTRL_AUTO: + if (bp->dev->mtu <= 4500) + bp->flow_ctrl = FLOW_CTRL_BOTH; + else + bp->flow_ctrl = FLOW_CTRL_TX; + break; - switch (pause_result) { /* ASYM P ASYM P */ - case 0xb: /* 1 0 1 1 */ - bp->flow_ctrl = FLOW_CTRL_TX; - break; - - case 0xe: /* 1 1 1 0 */ - bp->flow_ctrl = FLOW_CTRL_RX; - break; + case FLOW_CTRL_TX: + bp->flow_ctrl = FLOW_CTRL_TX; + break; - case 0x5: /* 0 1 0 1 */ - case 0x7: /* 0 1 1 1 */ - case 0xd: /* 1 1 0 1 */ - case 0xf: /* 1 1 1 1 */ - bp->flow_ctrl = FLOW_CTRL_BOTH; - break; + case FLOW_CTRL_RX: + if (bp->dev->mtu <= 4500) + bp->flow_ctrl = FLOW_CTRL_RX; + break; - default: - break; - } + case FLOW_CTRL_BOTH: + if (bp->dev->mtu <= 4500) + bp->flow_ctrl = FLOW_CTRL_BOTH; + else + bp->flow_ctrl = FLOW_CTRL_TX; + break; - } else { /* forced mode */ - switch (bp->req_flow_ctrl) { - case FLOW_CTRL_AUTO: - if (bp->dev->mtu <= 4500) - bp->flow_ctrl = FLOW_CTRL_BOTH; - else - bp->flow_ctrl = FLOW_CTRL_TX; - break; + case FLOW_CTRL_NONE: + default: + break; + } + } else { /* forced mode */ + switch (bp->req_flow_ctrl) { + case FLOW_CTRL_AUTO: + DP(NETIF_MSG_LINK, "req_flow_ctrl 0x%x while" + " req_autoneg 0x%x\n", + bp->req_flow_ctrl, bp->req_autoneg); + break; - case FLOW_CTRL_TX: - case FLOW_CTRL_RX: - case FLOW_CTRL_BOTH: - bp->flow_ctrl = bp->req_flow_ctrl; - break; + case FLOW_CTRL_TX: + case FLOW_CTRL_RX: + case FLOW_CTRL_BOTH: + bp->flow_ctrl = bp->req_flow_ctrl; + break; - case FLOW_CTRL_NONE: - default: - break; + case FLOW_CTRL_NONE: + default: + break; + } } } DP(NETIF_MSG_LINK, "flow_ctrl 0x%x\n", bp->flow_ctrl); @@ -1548,9 +1803,9 @@ static void bnx2x_link_settings_status(struct bnx2x *bp, u32 gp_status) bp->link_status = 0; if (gp_status & MDIO_GP_STATUS_TOP_AN_STATUS1_LINK_STATUS) { - DP(NETIF_MSG_LINK, "link up\n"); + DP(NETIF_MSG_LINK, "phy link up\n"); - bp->link_up = 1; + bp->phy_link_up = 1; bp->link_status |= LINK_STATUS_LINK_UP; if (gp_status & MDIO_GP_STATUS_TOP_AN_STATUS1_DUPLEX_STATUS) @@ -1659,20 +1914,20 @@ static void bnx2x_link_settings_status(struct bnx2x *bp, u32 gp_status) bp->link_status |= LINK_STATUS_RX_FLOW_CONTROL_ENABLED; } else { /* link_down */ - DP(NETIF_MSG_LINK, "link down\n"); + DP(NETIF_MSG_LINK, "phy link down\n"); - bp->link_up = 0; + bp->phy_link_up = 0; bp->line_speed = 0; bp->duplex = DUPLEX_FULL; bp->flow_ctrl = 0; } - DP(NETIF_MSG_LINK, "gp_status 0x%x link_up %d\n" + DP(NETIF_MSG_LINK, "gp_status 0x%x phy_link_up %d\n" DP_LEVEL " line_speed %d duplex %d flow_ctrl 0x%x" " link_status 0x%x\n", - gp_status, bp->link_up, bp->line_speed, bp->duplex, bp->flow_ctrl, - bp->link_status); + gp_status, bp->phy_link_up, bp->line_speed, bp->duplex, + bp->flow_ctrl, bp->link_status); } static void bnx2x_link_int_ack(struct bnx2x *bp, int is_10g) @@ -1680,40 +1935,40 @@ static void bnx2x_link_int_ack(struct bnx2x *bp, int is_10g) int port = bp->port; /* first reset all status - * we asume only one line will be change at a time */ + * we assume only one line will be change at a time */ bnx2x_bits_dis(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + port*4, - (NIG_XGXS0_LINK_STATUS | - NIG_SERDES0_LINK_STATUS | - NIG_STATUS_INTERRUPT_XGXS0_LINK10G)); - if (bp->link_up) { + (NIG_STATUS_XGXS0_LINK10G | + NIG_STATUS_XGXS0_LINK_STATUS | + NIG_STATUS_SERDES0_LINK_STATUS)); + if (bp->phy_link_up) { if (is_10g) { /* Disable the 10G link interrupt * by writing 1 to the status register */ - DP(NETIF_MSG_LINK, "10G XGXS link up\n"); + DP(NETIF_MSG_LINK, "10G XGXS phy link up\n"); bnx2x_bits_en(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + port*4, - NIG_STATUS_INTERRUPT_XGXS0_LINK10G); + NIG_STATUS_XGXS0_LINK10G); } else if (bp->phy_flags & PHY_XGXS_FLAG) { /* Disable the link interrupt * by writing 1 to the relevant lane * in the status register */ - DP(NETIF_MSG_LINK, "1G XGXS link up\n"); + DP(NETIF_MSG_LINK, "1G XGXS phy link up\n"); bnx2x_bits_en(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + port*4, ((1 << bp->ser_lane) << - NIG_XGXS0_LINK_STATUS_SIZE)); + NIG_STATUS_XGXS0_LINK_STATUS_SIZE)); } else { /* SerDes */ - DP(NETIF_MSG_LINK, "SerDes link up\n"); + DP(NETIF_MSG_LINK, "SerDes phy link up\n"); /* Disable the link interrupt * by writing 1 to the status register */ bnx2x_bits_en(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + port*4, - NIG_SERDES0_LINK_STATUS); + NIG_STATUS_SERDES0_LINK_STATUS); } } else { /* link_down */ @@ -1724,91 +1979,182 @@ static int bnx2x_ext_phy_is_link_up(struct bnx2x *bp) { u32 ext_phy_type; u32 ext_phy_addr; - u32 local_phy; - u32 val = 0; + u32 val1 = 0, val2; u32 rx_sd, pcs_status; if (bp->phy_flags & PHY_XGXS_FLAG) { - local_phy = bp->phy_addr; ext_phy_addr = ((bp->ext_phy_config & PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >> PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT); - bp->phy_addr = (u8)ext_phy_addr; ext_phy_type = XGXS_EXT_PHY_TYPE(bp); switch (ext_phy_type) { case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT: DP(NETIF_MSG_LINK, "XGXS Direct\n"); - val = 1; + val1 = 1; break; case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705: DP(NETIF_MSG_LINK, "XGXS 8705\n"); - bnx2x_mdio45_read(bp, EXT_PHY_OPT_WIS_DEVAD, - EXT_PHY_OPT_LASI_STATUS, &val); - DP(NETIF_MSG_LINK, "8705 LASI status is %d\n", val); - - bnx2x_mdio45_read(bp, EXT_PHY_OPT_WIS_DEVAD, - EXT_PHY_OPT_LASI_STATUS, &val); - DP(NETIF_MSG_LINK, "8705 LASI status is %d\n", val); - - bnx2x_mdio45_read(bp, EXT_PHY_OPT_PMA_PMD_DEVAD, + bnx2x_mdio45_read(bp, ext_phy_addr, + EXT_PHY_OPT_WIS_DEVAD, + EXT_PHY_OPT_LASI_STATUS, &val1); + DP(NETIF_MSG_LINK, "8705 LASI status 0x%x\n", val1); + + bnx2x_mdio45_read(bp, ext_phy_addr, + EXT_PHY_OPT_WIS_DEVAD, + EXT_PHY_OPT_LASI_STATUS, &val1); + DP(NETIF_MSG_LINK, "8705 LASI status 0x%x\n", val1); + + bnx2x_mdio45_read(bp, ext_phy_addr, + EXT_PHY_OPT_PMA_PMD_DEVAD, EXT_PHY_OPT_PMD_RX_SD, &rx_sd); - val = (rx_sd & 0x1); + DP(NETIF_MSG_LINK, "8705 rx_sd 0x%x\n", rx_sd); + val1 = (rx_sd & 0x1); break; case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706: DP(NETIF_MSG_LINK, "XGXS 8706\n"); - bnx2x_mdio45_read(bp, EXT_PHY_OPT_PMA_PMD_DEVAD, - EXT_PHY_OPT_LASI_STATUS, &val); - DP(NETIF_MSG_LINK, "8706 LASI status is %d\n", val); - - bnx2x_mdio45_read(bp, EXT_PHY_OPT_PMA_PMD_DEVAD, - EXT_PHY_OPT_LASI_STATUS, &val); - DP(NETIF_MSG_LINK, "8706 LASI status is %d\n", val); - - bnx2x_mdio45_read(bp, EXT_PHY_OPT_PMA_PMD_DEVAD, + bnx2x_mdio45_read(bp, ext_phy_addr, + EXT_PHY_OPT_PMA_PMD_DEVAD, + EXT_PHY_OPT_LASI_STATUS, &val1); + DP(NETIF_MSG_LINK, "8706 LASI status 0x%x\n", val1); + + bnx2x_mdio45_read(bp, ext_phy_addr, + EXT_PHY_OPT_PMA_PMD_DEVAD, + EXT_PHY_OPT_LASI_STATUS, &val1); + DP(NETIF_MSG_LINK, "8706 LASI status 0x%x\n", val1); + + bnx2x_mdio45_read(bp, ext_phy_addr, + EXT_PHY_OPT_PMA_PMD_DEVAD, EXT_PHY_OPT_PMD_RX_SD, &rx_sd); - bnx2x_mdio45_read(bp, EXT_PHY_OPT_PCS_DEVAD, - EXT_PHY_OPT_PCS_STATUS, &pcs_status); + bnx2x_mdio45_read(bp, ext_phy_addr, + EXT_PHY_OPT_PCS_DEVAD, + EXT_PHY_OPT_PCS_STATUS, &pcs_status); + bnx2x_mdio45_read(bp, ext_phy_addr, + EXT_PHY_AUTO_NEG_DEVAD, + EXT_PHY_OPT_AN_LINK_STATUS, &val2); + DP(NETIF_MSG_LINK, "8706 rx_sd 0x%x" - " pcs_status 0x%x\n", rx_sd, pcs_status); - /* link is up if both bit 0 of pmd_rx and - * bit 0 of pcs_status are set + " pcs_status 0x%x 1Gbps link_status 0x%x 0x%x\n", + rx_sd, pcs_status, val2, (val2 & (1<<1))); + /* link is up if both bit 0 of pmd_rx_sd and + * bit 0 of pcs_status are set, or if the autoneg bit + 1 is set */ - val = (rx_sd & pcs_status); + val1 = ((rx_sd & pcs_status & 0x1) || (val2 & (1<<1))); + break; + + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072: + bnx2x_hw_lock(bp, HW_LOCK_RESOURCE_8072_MDIO); + + /* clear the interrupt LASI status register */ + bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0, + ext_phy_addr, + EXT_PHY_KR_PCS_DEVAD, + EXT_PHY_KR_LASI_STATUS, &val2); + bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0, + ext_phy_addr, + EXT_PHY_KR_PCS_DEVAD, + EXT_PHY_KR_LASI_STATUS, &val1); + DP(NETIF_MSG_LINK, "KR LASI status 0x%x->0x%x\n", + val2, val1); + /* Check the LASI */ + bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0, + ext_phy_addr, + EXT_PHY_KR_PMA_PMD_DEVAD, + 0x9003, &val2); + bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0, + ext_phy_addr, + EXT_PHY_KR_PMA_PMD_DEVAD, + 0x9003, &val1); + DP(NETIF_MSG_LINK, "KR 0x9003 0x%x->0x%x\n", + val2, val1); + /* Check the link status */ + bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0, + ext_phy_addr, + EXT_PHY_KR_PCS_DEVAD, + EXT_PHY_KR_PCS_STATUS, &val2); + DP(NETIF_MSG_LINK, "KR PCS status 0x%x\n", val2); + /* Check the link status on 1.1.2 */ + bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0, + ext_phy_addr, + EXT_PHY_OPT_PMA_PMD_DEVAD, + EXT_PHY_KR_STATUS, &val2); + bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0, + ext_phy_addr, + EXT_PHY_OPT_PMA_PMD_DEVAD, + EXT_PHY_KR_STATUS, &val1); + DP(NETIF_MSG_LINK, + "KR PMA status 0x%x->0x%x\n", val2, val1); + val1 = ((val1 & 4) == 4); + /* If 1G was requested assume the link is up */ + if (!(bp->req_autoneg & AUTONEG_SPEED) && + (bp->req_line_speed == SPEED_1000)) + val1 = 1; + bnx2x_hw_unlock(bp, HW_LOCK_RESOURCE_8072_MDIO); + break; + + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101: + bnx2x_mdio45_read(bp, ext_phy_addr, + EXT_PHY_OPT_PMA_PMD_DEVAD, + EXT_PHY_OPT_LASI_STATUS, &val2); + bnx2x_mdio45_read(bp, ext_phy_addr, + EXT_PHY_OPT_PMA_PMD_DEVAD, + EXT_PHY_OPT_LASI_STATUS, &val1); + DP(NETIF_MSG_LINK, + "10G-base-T LASI status 0x%x->0x%x\n", val2, val1); + bnx2x_mdio45_read(bp, ext_phy_addr, + EXT_PHY_OPT_PMA_PMD_DEVAD, + EXT_PHY_KR_STATUS, &val2); + bnx2x_mdio45_read(bp, ext_phy_addr, + EXT_PHY_OPT_PMA_PMD_DEVAD, + EXT_PHY_KR_STATUS, &val1); + DP(NETIF_MSG_LINK, + "10G-base-T PMA status 0x%x->0x%x\n", val2, val1); + val1 = ((val1 & 4) == 4); + /* if link is up + * print the AN outcome of the SFX7101 PHY + */ + if (val1) { + bnx2x_mdio45_read(bp, ext_phy_addr, + EXT_PHY_KR_AUTO_NEG_DEVAD, + 0x21, &val2); + DP(NETIF_MSG_LINK, + "SFX7101 AN status 0x%x->%s\n", val2, + (val2 & (1<<14)) ? "Master" : "Slave"); + } break; default: DP(NETIF_MSG_LINK, "BAD XGXS ext_phy_config 0x%x\n", bp->ext_phy_config); - val = 0; + val1 = 0; break; } - bp->phy_addr = local_phy; } else { /* SerDes */ ext_phy_type = SERDES_EXT_PHY_TYPE(bp); switch (ext_phy_type) { case PORT_HW_CFG_SERDES_EXT_PHY_TYPE_DIRECT: DP(NETIF_MSG_LINK, "SerDes Direct\n"); - val = 1; + val1 = 1; break; case PORT_HW_CFG_SERDES_EXT_PHY_TYPE_BCM5482: DP(NETIF_MSG_LINK, "SerDes 5482\n"); - val = 1; + val1 = 1; break; default: DP(NETIF_MSG_LINK, "BAD SerDes ext_phy_config 0x%x\n", bp->ext_phy_config); - val = 0; + val1 = 0; break; } } - return val; + return val1; } static void bnx2x_bmac_enable(struct bnx2x *bp, int is_lb) @@ -1819,7 +2165,7 @@ static void bnx2x_bmac_enable(struct bnx2x *bp, int is_lb) u32 wb_write[2]; u32 val; - DP(NETIF_MSG_LINK, "enableing BigMAC\n"); + DP(NETIF_MSG_LINK, "enabling BigMAC\n"); /* reset and unreset the BigMac */ REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR, (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port)); @@ -1933,6 +2279,35 @@ static void bnx2x_bmac_enable(struct bnx2x *bp, int is_lb) bp->stats_state = STATS_STATE_ENABLE; } +static void bnx2x_bmac_rx_disable(struct bnx2x *bp) +{ + int port = bp->port; + u32 bmac_addr = port ? NIG_REG_INGRESS_BMAC1_MEM : + NIG_REG_INGRESS_BMAC0_MEM; + u32 wb_write[2]; + + /* Only if the bmac is out of reset */ + if (REG_RD(bp, MISC_REG_RESET_REG_2) & + (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port)) { + /* Clear Rx Enable bit in BMAC_CONTROL register */ +#ifdef BNX2X_DMAE_RD + bnx2x_read_dmae(bp, bmac_addr + + BIGMAC_REGISTER_BMAC_CONTROL, 2); + wb_write[0] = *bnx2x_sp(bp, wb_data[0]); + wb_write[1] = *bnx2x_sp(bp, wb_data[1]); +#else + wb_write[0] = REG_RD(bp, + bmac_addr + BIGMAC_REGISTER_BMAC_CONTROL); + wb_write[1] = REG_RD(bp, + bmac_addr + BIGMAC_REGISTER_BMAC_CONTROL + 4); +#endif + wb_write[0] &= ~BMAC_CONTROL_RX_ENABLE; + REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_BMAC_CONTROL, + wb_write, 2); + msleep(1); + } +} + static void bnx2x_emac_enable(struct bnx2x *bp) { int port = bp->port; @@ -1940,7 +2315,7 @@ static void bnx2x_emac_enable(struct bnx2x *bp) u32 val; int timeout; - DP(NETIF_MSG_LINK, "enableing EMAC\n"); + DP(NETIF_MSG_LINK, "enabling EMAC\n"); /* reset and unreset the emac core */ REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR, (MISC_REGISTERS_RESET_REG_2_RST_EMAC0_HARD_CORE << port)); @@ -2033,7 +2408,7 @@ static void bnx2x_emac_enable(struct bnx2x *bp) EMAC_TX_MODE_EXT_PAUSE_EN); } - /* KEEP_VLAN_TAG, promiscous */ + /* KEEP_VLAN_TAG, promiscuous */ val = REG_RD(bp, emac_base + EMAC_REG_EMAC_RX_MODE); val |= EMAC_RX_MODE_KEEP_VLAN_TAG | EMAC_RX_MODE_PROMISCUOUS; EMAC_WR(EMAC_REG_EMAC_RX_MODE, val); @@ -2161,7 +2536,6 @@ static void bnx2x_pbf_update(struct bnx2x *bp) u32 count = 1000; u32 pause = 0; - /* disable port */ REG_WR(bp, PBF_REG_DISABLE_NEW_TASK_PROC_P0 + port*4, 0x1); @@ -2232,7 +2606,7 @@ static void bnx2x_pbf_update(struct bnx2x *bp) static void bnx2x_update_mng(struct bnx2x *bp) { if (!nomcp) - SHMEM_WR(bp, drv_fw_mb[bp->port].link_status, + SHMEM_WR(bp, port_mb[bp->port].link_status, bp->link_status); } @@ -2294,19 +2668,19 @@ static void bnx2x_link_down(struct bnx2x *bp) DP(BNX2X_MSG_STATS, "stats_state - STOP\n"); } - /* indicate link down */ + /* indicate no mac active */ bp->phy_flags &= ~(PHY_BMAC_FLAG | PHY_EMAC_FLAG); - /* reset BigMac */ - REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR, - (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port)); + /* update shared memory */ + bnx2x_update_mng(bp); - /* ignore drain flag interrupt */ /* activate nig drain */ NIG_WR(NIG_REG_EGRESS_DRAIN0_MODE + port*4, 1); - /* update shared memory */ - bnx2x_update_mng(bp); + /* reset BigMac */ + bnx2x_bmac_rx_disable(bp); + REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR, + (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port)); /* indicate link down */ bnx2x_link_report(bp); @@ -2317,14 +2691,15 @@ static void bnx2x_init_mac_stats(struct bnx2x *bp); /* This function is called upon link interrupt */ static void bnx2x_link_update(struct bnx2x *bp) { - u32 gp_status; int port = bp->port; int i; + u32 gp_status; int link_10g; - DP(NETIF_MSG_LINK, "port %x, is xgxs %x, stat_mask 0x%x," + DP(NETIF_MSG_LINK, "port %x, %s, int_status 0x%x," " int_mask 0x%x, saved_mask 0x%x, MI_INT %x, SERDES_LINK %x," - " 10G %x, XGXS_LINK %x\n", port, (bp->phy_flags & PHY_XGXS_FLAG), + " 10G %x, XGXS_LINK %x\n", port, + (bp->phy_flags & PHY_XGXS_FLAG)? "XGXS":"SerDes", REG_RD(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + port*4), REG_RD(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4), bp->nig_mask, REG_RD(bp, NIG_REG_EMAC0_STATUS_MISC_MI_INT + port*0x18), @@ -2336,7 +2711,7 @@ static void bnx2x_link_update(struct bnx2x *bp) might_sleep(); MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_GP_STATUS); /* avoid fast toggling */ - for (i = 0 ; i < 10 ; i++) { + for (i = 0; i < 10; i++) { msleep(10); bnx2x_mdio22_read(bp, MDIO_GP_STATUS_TOP_AN_STATUS1, &gp_status); @@ -2351,7 +2726,8 @@ static void bnx2x_link_update(struct bnx2x *bp) bnx2x_link_int_ack(bp, link_10g); /* link is up only if both local phy and external phy are up */ - if (bp->link_up && bnx2x_ext_phy_is_link_up(bp)) { + bp->link_up = (bp->phy_link_up && bnx2x_ext_phy_is_link_up(bp)); + if (bp->link_up) { if (link_10g) { bnx2x_bmac_enable(bp, 0); bnx2x_leds_set(bp, SPEED_10000); @@ -2427,7 +2803,9 @@ static void bnx2x_reset_unicore(struct bnx2x *bp) } } - BNX2X_ERR("BUG! unicore is still in reset!\n"); + BNX2X_ERR("BUG! %s (0x%x) is still in reset!\n", + (bp->phy_flags & PHY_XGXS_FLAG)? "XGXS":"SerDes", + bp->phy_addr); } static void bnx2x_set_swap_lanes(struct bnx2x *bp) @@ -2475,12 +2853,12 @@ static void bnx2x_set_parallel_detection(struct bnx2x *bp) MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_10G_PARALLEL_DETECT); bnx2x_mdio22_write(bp, - MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_LINK, + MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_LINK, MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_LINK_CNT); bnx2x_mdio22_read(bp, - MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL, - &control2); + MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL, + &control2); if (bp->autoneg & AUTONEG_PARALLEL) { control2 |= @@ -2490,8 +2868,14 @@ static void bnx2x_set_parallel_detection(struct bnx2x *bp) ~MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL_PARDET10G_EN; } bnx2x_mdio22_write(bp, - MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL, - control2); + MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL, + control2); + + /* Disable parallel detection of HiG */ + MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_XGXS_BLOCK2); + bnx2x_mdio22_write(bp, MDIO_XGXS_BLOCK2_UNICORE_MODE_10G, + MDIO_XGXS_BLOCK2_UNICORE_MODE_10G_CX4_XGXS | + MDIO_XGXS_BLOCK2_UNICORE_MODE_10G_HIGIG_XGXS); } } @@ -2625,7 +3009,7 @@ static void bnx2x_set_brcm_cl37_advertisment(struct bnx2x *bp) MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_OVER_1G); /* set extended capabilities */ - if (bp->advertising & ADVERTISED_2500baseT_Full) + if (bp->advertising & ADVERTISED_2500baseX_Full) val |= MDIO_OVER_1G_UP1_2_5G; if (bp->advertising & ADVERTISED_10000baseT_Full) val |= MDIO_OVER_1G_UP1_10G; @@ -2641,20 +3025,91 @@ static void bnx2x_set_ieee_aneg_advertisment(struct bnx2x *bp) /* for AN, we are always publishing full duplex */ an_adv = MDIO_COMBO_IEEE0_AUTO_NEG_ADV_FULL_DUPLEX; - /* set pause */ - switch (bp->pause_mode) { - case PAUSE_SYMMETRIC: - an_adv |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_SYMMETRIC; - break; - case PAUSE_ASYMMETRIC: - an_adv |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC; - break; - case PAUSE_BOTH: - an_adv |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH; - break; - case PAUSE_NONE: - an_adv |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE; - break; + /* resolve pause mode and advertisement + * Please refer to Table 28B-3 of the 802.3ab-1999 spec */ + if (bp->req_autoneg & AUTONEG_FLOW_CTRL) { + switch (bp->req_flow_ctrl) { + case FLOW_CTRL_AUTO: + if (bp->dev->mtu <= 4500) { + an_adv |= + MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH; + bp->advertising |= (ADVERTISED_Pause | + ADVERTISED_Asym_Pause); + } else { + an_adv |= + MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC; + bp->advertising |= ADVERTISED_Asym_Pause; + } + break; + + case FLOW_CTRL_TX: + an_adv |= + MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC; + bp->advertising |= ADVERTISED_Asym_Pause; + break; + + case FLOW_CTRL_RX: + if (bp->dev->mtu <= 4500) { + an_adv |= + MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH; + bp->advertising |= (ADVERTISED_Pause | + ADVERTISED_Asym_Pause); + } else { + an_adv |= + MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE; + bp->advertising &= ~(ADVERTISED_Pause | + ADVERTISED_Asym_Pause); + } + break; + + case FLOW_CTRL_BOTH: + if (bp->dev->mtu <= 4500) { + an_adv |= + MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH; + bp->advertising |= (ADVERTISED_Pause | + ADVERTISED_Asym_Pause); + } else { + an_adv |= + MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC; + bp->advertising |= ADVERTISED_Asym_Pause; + } + break; + + case FLOW_CTRL_NONE: + default: + an_adv |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE; + bp->advertising &= ~(ADVERTISED_Pause | + ADVERTISED_Asym_Pause); + break; + } + } else { /* forced mode */ + switch (bp->req_flow_ctrl) { + case FLOW_CTRL_AUTO: + DP(NETIF_MSG_LINK, "req_flow_ctrl 0x%x while" + " req_autoneg 0x%x\n", + bp->req_flow_ctrl, bp->req_autoneg); + break; + + case FLOW_CTRL_TX: + an_adv |= + MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC; + bp->advertising |= ADVERTISED_Asym_Pause; + break; + + case FLOW_CTRL_RX: + case FLOW_CTRL_BOTH: + an_adv |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH; + bp->advertising |= (ADVERTISED_Pause | + ADVERTISED_Asym_Pause); + break; + + case FLOW_CTRL_NONE: + default: + an_adv |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE; + bp->advertising &= ~(ADVERTISED_Pause | + ADVERTISED_Asym_Pause); + break; + } } MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_COMBO_IEEE0); @@ -2752,47 +3207,162 @@ static void bnx2x_initialize_sgmii_process(struct bnx2x *bp) static void bnx2x_link_int_enable(struct bnx2x *bp) { int port = bp->port; + u32 ext_phy_type; + u32 mask; /* setting the status to report on link up for either XGXS or SerDes */ bnx2x_bits_dis(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + port*4, - (NIG_XGXS0_LINK_STATUS | - NIG_STATUS_INTERRUPT_XGXS0_LINK10G | - NIG_SERDES0_LINK_STATUS)); + (NIG_STATUS_XGXS0_LINK10G | + NIG_STATUS_XGXS0_LINK_STATUS | + NIG_STATUS_SERDES0_LINK_STATUS)); if (bp->phy_flags & PHY_XGXS_FLAG) { - /* TBD - - * in force mode (not AN) we can enable just the relevant - * interrupt - * Even in AN we might enable only one according to the AN - * speed mask - */ - bnx2x_bits_en(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4, - (NIG_MASK_XGXS0_LINK_STATUS | - NIG_MASK_XGXS0_LINK10G)); - DP(NETIF_MSG_LINK, "enable XGXS interrupt\n"); + mask = (NIG_MASK_XGXS0_LINK10G | + NIG_MASK_XGXS0_LINK_STATUS); + DP(NETIF_MSG_LINK, "enabled XGXS interrupt\n"); + ext_phy_type = XGXS_EXT_PHY_TYPE(bp); + if ((ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) && + (ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE) && + (ext_phy_type != + PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN)) { + mask |= NIG_MASK_MI_INT; + DP(NETIF_MSG_LINK, "enabled external phy int\n"); + } } else { /* SerDes */ - bnx2x_bits_en(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4, - NIG_MASK_SERDES0_LINK_STATUS); - DP(NETIF_MSG_LINK, "enable SerDes interrupt\n"); + mask = NIG_MASK_SERDES0_LINK_STATUS; + DP(NETIF_MSG_LINK, "enabled SerDes interrupt\n"); + ext_phy_type = SERDES_EXT_PHY_TYPE(bp); + if ((ext_phy_type != + PORT_HW_CFG_SERDES_EXT_PHY_TYPE_DIRECT) && + (ext_phy_type != + PORT_HW_CFG_SERDES_EXT_PHY_TYPE_NOT_CONN)) { + mask |= NIG_MASK_MI_INT; + DP(NETIF_MSG_LINK, "enabled external phy int\n"); + } } + bnx2x_bits_en(bp, + NIG_REG_MASK_INTERRUPT_PORT0 + port*4, + mask); + DP(NETIF_MSG_LINK, "port %x, %s, int_status 0x%x," + " int_mask 0x%x, MI_INT %x, SERDES_LINK %x," + " 10G %x, XGXS_LINK %x\n", port, + (bp->phy_flags & PHY_XGXS_FLAG)? "XGXS":"SerDes", + REG_RD(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + port*4), + REG_RD(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4), + REG_RD(bp, NIG_REG_EMAC0_STATUS_MISC_MI_INT + port*0x18), + REG_RD(bp, NIG_REG_SERDES0_STATUS_LINK_STATUS + port*0x3c), + REG_RD(bp, NIG_REG_XGXS0_STATUS_LINK10G + port*0x68), + REG_RD(bp, NIG_REG_XGXS0_STATUS_LINK_STATUS + port*0x68) + ); +} + +static void bnx2x_bcm8072_external_rom_boot(struct bnx2x *bp) +{ + u32 ext_phy_addr = ((bp->ext_phy_config & + PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >> + PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT); + u32 fw_ver1, fw_ver2; + + /* Need to wait 200ms after reset */ + msleep(200); + /* Boot port from external ROM + * Set ser_boot_ctl bit in the MISC_CTRL1 register + */ + bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, ext_phy_addr, + EXT_PHY_KR_PMA_PMD_DEVAD, + EXT_PHY_KR_MISC_CTRL1, 0x0001); + + /* Reset internal microprocessor */ + bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, ext_phy_addr, + EXT_PHY_KR_PMA_PMD_DEVAD, EXT_PHY_KR_GEN_CTRL, + EXT_PHY_KR_ROM_RESET_INTERNAL_MP); + /* set micro reset = 0 */ + bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, ext_phy_addr, + EXT_PHY_KR_PMA_PMD_DEVAD, EXT_PHY_KR_GEN_CTRL, + EXT_PHY_KR_ROM_MICRO_RESET); + /* Reset internal microprocessor */ + bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, ext_phy_addr, + EXT_PHY_KR_PMA_PMD_DEVAD, EXT_PHY_KR_GEN_CTRL, + EXT_PHY_KR_ROM_RESET_INTERNAL_MP); + /* wait for 100ms for code download via SPI port */ + msleep(100); + + /* Clear ser_boot_ctl bit */ + bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, ext_phy_addr, + EXT_PHY_KR_PMA_PMD_DEVAD, + EXT_PHY_KR_MISC_CTRL1, 0x0000); + /* Wait 100ms */ + msleep(100); + + /* Print the PHY FW version */ + bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0, ext_phy_addr, + EXT_PHY_KR_PMA_PMD_DEVAD, + 0xca19, &fw_ver1); + bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0, ext_phy_addr, + EXT_PHY_KR_PMA_PMD_DEVAD, + 0xca1a, &fw_ver2); + DP(NETIF_MSG_LINK, + "8072 FW version 0x%x:0x%x\n", fw_ver1, fw_ver2); +} + +static void bnx2x_bcm8072_force_10G(struct bnx2x *bp) +{ + u32 ext_phy_addr = ((bp->ext_phy_config & + PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >> + PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT); + + /* Force KR or KX */ + bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, ext_phy_addr, + EXT_PHY_KR_PMA_PMD_DEVAD, EXT_PHY_KR_CTRL, + 0x2040); + bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, ext_phy_addr, + EXT_PHY_KR_PMA_PMD_DEVAD, EXT_PHY_KR_CTRL2, + 0x000b); + bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, ext_phy_addr, + EXT_PHY_KR_PMA_PMD_DEVAD, EXT_PHY_KR_PMD_CTRL, + 0x0000); + bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, ext_phy_addr, + EXT_PHY_KR_AUTO_NEG_DEVAD, EXT_PHY_KR_CTRL, + 0x0000); } static void bnx2x_ext_phy_init(struct bnx2x *bp) { - int port = bp->port; u32 ext_phy_type; u32 ext_phy_addr; - u32 local_phy; + u32 cnt; + u32 ctrl; + u32 val = 0; if (bp->phy_flags & PHY_XGXS_FLAG) { - local_phy = bp->phy_addr; ext_phy_addr = ((bp->ext_phy_config & PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >> PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT); ext_phy_type = XGXS_EXT_PHY_TYPE(bp); + /* Make sure that the soft reset is off (expect for the 8072: + * due to the lock, it will be done inside the specific + * handling) + */ + if ((ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) && + (ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE) && + (ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN) && + (ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072)) { + /* Wait for soft reset to get cleared upto 1 sec */ + for (cnt = 0; cnt < 1000; cnt++) { + bnx2x_mdio45_read(bp, ext_phy_addr, + EXT_PHY_OPT_PMA_PMD_DEVAD, + EXT_PHY_OPT_CNTL, &ctrl); + if (!(ctrl & (1<<15))) + break; + msleep(1); + } + DP(NETIF_MSG_LINK, + "control reg 0x%x (after %d ms)\n", ctrl, cnt); + } + switch (ext_phy_type) { case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT: DP(NETIF_MSG_LINK, "XGXS Direct\n"); @@ -2800,49 +3370,235 @@ static void bnx2x_ext_phy_init(struct bnx2x *bp) case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705: DP(NETIF_MSG_LINK, "XGXS 8705\n"); - bnx2x_bits_en(bp, - NIG_REG_MASK_INTERRUPT_PORT0 + port*4, - NIG_MASK_MI_INT); - DP(NETIF_MSG_LINK, "enabled extenal phy int\n"); - bp->phy_addr = ext_phy_type; - bnx2x_mdio45_vwrite(bp, EXT_PHY_OPT_PMA_PMD_DEVAD, + bnx2x_mdio45_vwrite(bp, ext_phy_addr, + EXT_PHY_OPT_PMA_PMD_DEVAD, EXT_PHY_OPT_PMD_MISC_CNTL, 0x8288); - bnx2x_mdio45_vwrite(bp, EXT_PHY_OPT_PMA_PMD_DEVAD, + bnx2x_mdio45_vwrite(bp, ext_phy_addr, + EXT_PHY_OPT_PMA_PMD_DEVAD, EXT_PHY_OPT_PHY_IDENTIFIER, 0x7fbf); - bnx2x_mdio45_vwrite(bp, EXT_PHY_OPT_PMA_PMD_DEVAD, + bnx2x_mdio45_vwrite(bp, ext_phy_addr, + EXT_PHY_OPT_PMA_PMD_DEVAD, EXT_PHY_OPT_CMU_PLL_BYPASS, 0x0100); - bnx2x_mdio45_vwrite(bp, EXT_PHY_OPT_WIS_DEVAD, + bnx2x_mdio45_vwrite(bp, ext_phy_addr, + EXT_PHY_OPT_WIS_DEVAD, EXT_PHY_OPT_LASI_CNTL, 0x1); break; case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706: DP(NETIF_MSG_LINK, "XGXS 8706\n"); - bnx2x_bits_en(bp, - NIG_REG_MASK_INTERRUPT_PORT0 + port*4, - NIG_MASK_MI_INT); - DP(NETIF_MSG_LINK, "enabled extenal phy int\n"); - - bp->phy_addr = ext_phy_type; - bnx2x_mdio45_vwrite(bp, EXT_PHY_OPT_PMA_PMD_DEVAD, - EXT_PHY_OPT_PMD_DIGITAL_CNT, - 0x400); - bnx2x_mdio45_vwrite(bp, EXT_PHY_OPT_PMA_PMD_DEVAD, + + if (!(bp->req_autoneg & AUTONEG_SPEED)) { + /* Force speed */ + if (bp->req_line_speed == SPEED_10000) { + DP(NETIF_MSG_LINK, + "XGXS 8706 force 10Gbps\n"); + bnx2x_mdio45_vwrite(bp, ext_phy_addr, + EXT_PHY_OPT_PMA_PMD_DEVAD, + EXT_PHY_OPT_PMD_DIGITAL_CNT, + 0x400); + } else { + /* Force 1Gbps */ + DP(NETIF_MSG_LINK, + "XGXS 8706 force 1Gbps\n"); + + bnx2x_mdio45_vwrite(bp, ext_phy_addr, + EXT_PHY_OPT_PMA_PMD_DEVAD, + EXT_PHY_OPT_CNTL, + 0x0040); + + bnx2x_mdio45_vwrite(bp, ext_phy_addr, + EXT_PHY_OPT_PMA_PMD_DEVAD, + EXT_PHY_OPT_CNTL2, + 0x000D); + } + + /* Enable LASI */ + bnx2x_mdio45_vwrite(bp, ext_phy_addr, + EXT_PHY_OPT_PMA_PMD_DEVAD, + EXT_PHY_OPT_LASI_CNTL, + 0x1); + } else { + /* AUTONEG */ + /* Allow CL37 through CL73 */ + DP(NETIF_MSG_LINK, "XGXS 8706 AutoNeg\n"); + bnx2x_mdio45_vwrite(bp, ext_phy_addr, + EXT_PHY_AUTO_NEG_DEVAD, + EXT_PHY_OPT_AN_CL37_CL73, + 0x040c); + + /* Enable Full-Duplex advertisment on CL37 */ + bnx2x_mdio45_vwrite(bp, ext_phy_addr, + EXT_PHY_AUTO_NEG_DEVAD, + EXT_PHY_OPT_AN_CL37_FD, + 0x0020); + /* Enable CL37 AN */ + bnx2x_mdio45_vwrite(bp, ext_phy_addr, + EXT_PHY_AUTO_NEG_DEVAD, + EXT_PHY_OPT_AN_CL37_AN, + 0x1000); + /* Advertise 10G/1G support */ + if (bp->advertising & + ADVERTISED_1000baseT_Full) + val = (1<<5); + if (bp->advertising & + ADVERTISED_10000baseT_Full) + val |= (1<<7); + + bnx2x_mdio45_vwrite(bp, ext_phy_addr, + EXT_PHY_AUTO_NEG_DEVAD, + EXT_PHY_OPT_AN_ADV, val); + /* Enable LASI */ + bnx2x_mdio45_vwrite(bp, ext_phy_addr, + EXT_PHY_OPT_PMA_PMD_DEVAD, + EXT_PHY_OPT_LASI_CNTL, + 0x1); + + /* Enable clause 73 AN */ + bnx2x_mdio45_write(bp, ext_phy_addr, + EXT_PHY_AUTO_NEG_DEVAD, + EXT_PHY_OPT_CNTL, + 0x1200); + } + break; + + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072: + bnx2x_hw_lock(bp, HW_LOCK_RESOURCE_8072_MDIO); + /* Wait for soft reset to get cleared upto 1 sec */ + for (cnt = 0; cnt < 1000; cnt++) { + bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0, + ext_phy_addr, + EXT_PHY_OPT_PMA_PMD_DEVAD, + EXT_PHY_OPT_CNTL, &ctrl); + if (!(ctrl & (1<<15))) + break; + msleep(1); + } + DP(NETIF_MSG_LINK, + "8072 control reg 0x%x (after %d ms)\n", + ctrl, cnt); + + bnx2x_bcm8072_external_rom_boot(bp); + DP(NETIF_MSG_LINK, "Finshed loading 8072 KR ROM\n"); + + /* enable LASI */ + bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, + ext_phy_addr, + EXT_PHY_KR_PMA_PMD_DEVAD, + 0x9000, 0x0400); + bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, + ext_phy_addr, + EXT_PHY_KR_PMA_PMD_DEVAD, + EXT_PHY_KR_LASI_CNTL, 0x0004); + + /* If this is forced speed, set to KR or KX + * (all other are not supported) + */ + if (!(bp->req_autoneg & AUTONEG_SPEED)) { + if (bp->req_line_speed == SPEED_10000) { + bnx2x_bcm8072_force_10G(bp); + DP(NETIF_MSG_LINK, + "Forced speed 10G on 8072\n"); + /* unlock */ + bnx2x_hw_unlock(bp, + HW_LOCK_RESOURCE_8072_MDIO); + break; + } else + val = (1<<5); + } else { + + /* Advertise 10G/1G support */ + if (bp->advertising & + ADVERTISED_1000baseT_Full) + val = (1<<5); + if (bp->advertising & + ADVERTISED_10000baseT_Full) + val |= (1<<7); + } + bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, + ext_phy_addr, + EXT_PHY_KR_AUTO_NEG_DEVAD, + 0x11, val); + /* Add support for CL37 ( passive mode ) I */ + bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, + ext_phy_addr, + EXT_PHY_KR_AUTO_NEG_DEVAD, + 0x8370, 0x040c); + /* Add support for CL37 ( passive mode ) II */ + bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, + ext_phy_addr, + EXT_PHY_KR_AUTO_NEG_DEVAD, + 0xffe4, 0x20); + /* Add support for CL37 ( passive mode ) III */ + bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, + ext_phy_addr, + EXT_PHY_KR_AUTO_NEG_DEVAD, + 0xffe0, 0x1000); + /* Restart autoneg */ + msleep(500); + bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, + ext_phy_addr, + EXT_PHY_KR_AUTO_NEG_DEVAD, + EXT_PHY_KR_CTRL, 0x1200); + DP(NETIF_MSG_LINK, "8072 Autoneg Restart: " + "1G %ssupported 10G %ssupported\n", + (val & (1<<5)) ? "" : "not ", + (val & (1<<7)) ? "" : "not "); + + /* unlock */ + bnx2x_hw_unlock(bp, HW_LOCK_RESOURCE_8072_MDIO); + break; + + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101: + DP(NETIF_MSG_LINK, + "Setting the SFX7101 LASI indication\n"); + bnx2x_mdio45_vwrite(bp, ext_phy_addr, + EXT_PHY_OPT_PMA_PMD_DEVAD, EXT_PHY_OPT_LASI_CNTL, 0x1); + DP(NETIF_MSG_LINK, + "Setting the SFX7101 LED to blink on traffic\n"); + bnx2x_mdio45_vwrite(bp, ext_phy_addr, + EXT_PHY_OPT_PMA_PMD_DEVAD, + 0xC007, (1<<3)); + + /* read modify write pause advertizing */ + bnx2x_mdio45_read(bp, ext_phy_addr, + EXT_PHY_KR_AUTO_NEG_DEVAD, + EXT_PHY_KR_AUTO_NEG_ADVERT, &val); + val &= ~EXT_PHY_KR_AUTO_NEG_ADVERT_PAUSE_BOTH; + /* Please refer to Table 28B-3 of 802.3ab-1999 spec. */ + if (bp->advertising & ADVERTISED_Pause) + val |= EXT_PHY_KR_AUTO_NEG_ADVERT_PAUSE; + + if (bp->advertising & ADVERTISED_Asym_Pause) { + val |= + EXT_PHY_KR_AUTO_NEG_ADVERT_PAUSE_ASYMMETRIC; + } + DP(NETIF_MSG_LINK, "SFX7101 AN advertize 0x%x\n", val); + bnx2x_mdio45_vwrite(bp, ext_phy_addr, + EXT_PHY_KR_AUTO_NEG_DEVAD, + EXT_PHY_KR_AUTO_NEG_ADVERT, val); + /* Restart autoneg */ + bnx2x_mdio45_read(bp, ext_phy_addr, + EXT_PHY_KR_AUTO_NEG_DEVAD, + EXT_PHY_KR_CTRL, &val); + val |= 0x200; + bnx2x_mdio45_write(bp, ext_phy_addr, + EXT_PHY_KR_AUTO_NEG_DEVAD, + EXT_PHY_KR_CTRL, val); break; default: - DP(NETIF_MSG_LINK, "BAD XGXS ext_phy_config 0x%x\n", - bp->ext_phy_config); + BNX2X_ERR("BAD XGXS ext_phy_config 0x%x\n", + bp->ext_phy_config); break; } - bp->phy_addr = local_phy; } else { /* SerDes */ -/* ext_phy_addr = ((bp->ext_phy_config & +/* ext_phy_addr = ((bp->ext_phy_config & PORT_HW_CFG_SERDES_EXT_PHY_ADDR_MASK) >> PORT_HW_CFG_SERDES_EXT_PHY_ADDR_SHIFT); */ @@ -2854,10 +3610,6 @@ static void bnx2x_ext_phy_init(struct bnx2x *bp) case PORT_HW_CFG_SERDES_EXT_PHY_TYPE_BCM5482: DP(NETIF_MSG_LINK, "SerDes 5482\n"); - bnx2x_bits_en(bp, - NIG_REG_MASK_INTERRUPT_PORT0 + port*4, - NIG_MASK_MI_INT); - DP(NETIF_MSG_LINK, "enabled extenal phy int\n"); break; default: @@ -2871,8 +3623,22 @@ static void bnx2x_ext_phy_init(struct bnx2x *bp) static void bnx2x_ext_phy_reset(struct bnx2x *bp) { u32 ext_phy_type; - u32 ext_phy_addr; - u32 local_phy; + u32 ext_phy_addr = ((bp->ext_phy_config & + PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >> + PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT); + u32 board = (bp->board & SHARED_HW_CFG_BOARD_TYPE_MASK); + + /* The PHY reset is controled by GPIO 1 + * Give it 1ms of reset pulse + */ + if ((board != SHARED_HW_CFG_BOARD_TYPE_BCM957710T1002G) && + (board != SHARED_HW_CFG_BOARD_TYPE_BCM957710T1003G)) { + bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1, + MISC_REGISTERS_GPIO_OUTPUT_LOW); + msleep(1); + bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1, + MISC_REGISTERS_GPIO_OUTPUT_HIGH); + } if (bp->phy_flags & PHY_XGXS_FLAG) { ext_phy_type = XGXS_EXT_PHY_TYPE(bp); @@ -2883,15 +3649,24 @@ static void bnx2x_ext_phy_reset(struct bnx2x *bp) case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705: case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706: - DP(NETIF_MSG_LINK, "XGXS 8705/6\n"); - local_phy = bp->phy_addr; - ext_phy_addr = ((bp->ext_phy_config & - PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >> - PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT); - bp->phy_addr = (u8)ext_phy_addr; - bnx2x_mdio45_write(bp, EXT_PHY_OPT_PMA_PMD_DEVAD, + DP(NETIF_MSG_LINK, "XGXS 8705/8706\n"); + bnx2x_mdio45_write(bp, ext_phy_addr, + EXT_PHY_OPT_PMA_PMD_DEVAD, EXT_PHY_OPT_CNTL, 0xa040); - bp->phy_addr = local_phy; + break; + + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072: + DP(NETIF_MSG_LINK, "XGXS 8072\n"); + bnx2x_hw_lock(bp, HW_LOCK_RESOURCE_8072_MDIO); + bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, + ext_phy_addr, + EXT_PHY_KR_PMA_PMD_DEVAD, + 0, 1<<15); + bnx2x_hw_unlock(bp, HW_LOCK_RESOURCE_8072_MDIO); + break; + + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101: + DP(NETIF_MSG_LINK, "XGXS SFX7101\n"); break; default: @@ -2930,6 +3705,7 @@ static void bnx2x_link_initialize(struct bnx2x *bp) NIG_MASK_SERDES0_LINK_STATUS | NIG_MASK_MI_INT)); + /* Activate the external PHY */ bnx2x_ext_phy_reset(bp); bnx2x_set_aer_mmd(bp); @@ -2994,13 +3770,13 @@ static void bnx2x_link_initialize(struct bnx2x *bp) /* AN enabled */ bnx2x_set_brcm_cl37_advertisment(bp); - /* program duplex & pause advertisment (for aneg) */ + /* program duplex & pause advertisement (for aneg) */ bnx2x_set_ieee_aneg_advertisment(bp); /* enable autoneg */ bnx2x_set_autoneg(bp); - /* enalbe and restart AN */ + /* enable and restart AN */ bnx2x_restart_autoneg(bp); } @@ -3010,11 +3786,11 @@ static void bnx2x_link_initialize(struct bnx2x *bp) bnx2x_initialize_sgmii_process(bp); } - /* enable the interrupt */ - bnx2x_link_int_enable(bp); - /* init ext phy and enable link state int */ bnx2x_ext_phy_init(bp); + + /* enable the interrupt */ + bnx2x_link_int_enable(bp); } static void bnx2x_phy_deassert(struct bnx2x *bp) @@ -3073,6 +3849,11 @@ static int bnx2x_phy_init(struct bnx2x *bp) static void bnx2x_link_reset(struct bnx2x *bp) { int port = bp->port; + u32 board = (bp->board & SHARED_HW_CFG_BOARD_TYPE_MASK); + + /* update shared memory */ + bp->link_status = 0; + bnx2x_update_mng(bp); /* disable attentions */ bnx2x_bits_dis(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4, @@ -3081,21 +3862,45 @@ static void bnx2x_link_reset(struct bnx2x *bp) NIG_MASK_SERDES0_LINK_STATUS | NIG_MASK_MI_INT)); - bnx2x_ext_phy_reset(bp); + /* activate nig drain */ + NIG_WR(NIG_REG_EGRESS_DRAIN0_MODE + port*4, 1); + + /* disable nig egress interface */ + NIG_WR(NIG_REG_BMAC0_OUT_EN + port*4, 0); + NIG_WR(NIG_REG_EGRESS_EMAC0_OUT_EN + port*4, 0); + + /* Stop BigMac rx */ + bnx2x_bmac_rx_disable(bp); + + /* disable emac */ + NIG_WR(NIG_REG_NIG_EMAC0_EN + port*4, 0); + + msleep(10); + + /* The PHY reset is controled by GPIO 1 + * Hold it as output low + */ + if ((board != SHARED_HW_CFG_BOARD_TYPE_BCM957710T1002G) && + (board != SHARED_HW_CFG_BOARD_TYPE_BCM957710T1003G)) { + bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1, + MISC_REGISTERS_GPIO_OUTPUT_LOW); + DP(NETIF_MSG_LINK, "reset external PHY\n"); + } /* reset the SerDes/XGXS */ REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_3_CLEAR, (0x1ff << (port*16))); - /* reset EMAC / BMAC and disable NIG interfaces */ - NIG_WR(NIG_REG_BMAC0_IN_EN + port*4, 0); - NIG_WR(NIG_REG_BMAC0_OUT_EN + port*4, 0); + /* reset BigMac */ + REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR, + (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port)); - NIG_WR(NIG_REG_NIG_EMAC0_EN + port*4, 0); + /* disable nig ingress interface */ + NIG_WR(NIG_REG_BMAC0_IN_EN + port*4, 0); NIG_WR(NIG_REG_EMAC0_IN_EN + port*4, 0); - NIG_WR(NIG_REG_EGRESS_EMAC0_OUT_EN + port*4, 0); - NIG_WR(NIG_REG_EGRESS_DRAIN0_MODE + port*4, 1); + /* set link down */ + bp->link_up = 0; } #ifdef BNX2X_XGXS_LB @@ -3158,7 +3963,7 @@ static int bnx2x_sp_post(struct bnx2x *bp, int command, int cid, int port = bp->port; DP(NETIF_MSG_TIMER, - "spe (%x:%x) command %x hw_cid %x data (%x:%x) left %x\n", + "spe (%x:%x) command %d hw_cid %x data (%x:%x) left %x\n", (u32)U64_HI(bp->spq_mapping), (u32)(U64_LO(bp->spq_mapping) + (void *)bp->spq_prod_bd - (void *)bp->spq), command, HW_CID(bp, cid), data_hi, data_lo, bp->spq_left); @@ -3176,6 +3981,7 @@ static int bnx2x_sp_post(struct bnx2x *bp, int command, int cid, bnx2x_panic(); return -EBUSY; } + /* CID needs port number to be encoded int it */ bp->spq_prod_bd->hdr.conn_and_cmd_data = cpu_to_le32(((command << SPE_HDR_CMD_ID_SHIFT) | @@ -3282,8 +4088,8 @@ static void bnx2x_attn_int_asserted(struct bnx2x *bp, u32 asserted) u32 igu_addr = (IGU_ADDR_ATTN_BITS_SET + IGU_PORT_BASE * port) * 8; u32 aeu_addr = port ? MISC_REG_AEU_MASK_ATTN_FUNC_1 : MISC_REG_AEU_MASK_ATTN_FUNC_0; - u32 nig_mask_addr = port ? NIG_REG_MASK_INTERRUPT_PORT1 : - NIG_REG_MASK_INTERRUPT_PORT0; + u32 nig_int_mask_addr = port ? NIG_REG_MASK_INTERRUPT_PORT1 : + NIG_REG_MASK_INTERRUPT_PORT0; if (~bp->aeu_mask & (asserted & 0xff)) BNX2X_ERR("IGU ERROR\n"); @@ -3301,15 +4107,11 @@ static void bnx2x_attn_int_asserted(struct bnx2x *bp, u32 asserted) if (asserted & ATTN_HARD_WIRED_MASK) { if (asserted & ATTN_NIG_FOR_FUNC) { - u32 nig_status_port; - u32 nig_int_addr = port ? - NIG_REG_STATUS_INTERRUPT_PORT1 : - NIG_REG_STATUS_INTERRUPT_PORT0; - bp->nig_mask = REG_RD(bp, nig_mask_addr); - REG_WR(bp, nig_mask_addr, 0); + /* save nig interrupt mask */ + bp->nig_mask = REG_RD(bp, nig_int_mask_addr); + REG_WR(bp, nig_int_mask_addr, 0); - nig_status_port = REG_RD(bp, nig_int_addr); bnx2x_link_update(bp); /* handle unicore attn? */ @@ -3362,15 +4164,132 @@ static void bnx2x_attn_int_asserted(struct bnx2x *bp, u32 asserted) /* now set back the mask */ if (asserted & ATTN_NIG_FOR_FUNC) - REG_WR(bp, nig_mask_addr, bp->nig_mask); + REG_WR(bp, nig_int_mask_addr, bp->nig_mask); } -static void bnx2x_attn_int_deasserted(struct bnx2x *bp, u32 deasserted) +static inline void bnx2x_attn_int_deasserted0(struct bnx2x *bp, u32 attn) { int port = bp->port; - int index; + int reg_offset; + u32 val; + + if (attn & AEU_INPUTS_ATTN_BITS_SPIO5) { + + reg_offset = (port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0 : + MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0); + + val = REG_RD(bp, reg_offset); + val &= ~AEU_INPUTS_ATTN_BITS_SPIO5; + REG_WR(bp, reg_offset, val); + + BNX2X_ERR("SPIO5 hw attention\n"); + + switch (bp->board & SHARED_HW_CFG_BOARD_TYPE_MASK) { + case SHARED_HW_CFG_BOARD_TYPE_BCM957710A1022G: + /* Fan failure attention */ + + /* The PHY reset is controled by GPIO 1 */ + bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1, + MISC_REGISTERS_GPIO_OUTPUT_LOW); + /* Low power mode is controled by GPIO 2 */ + bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2, + MISC_REGISTERS_GPIO_OUTPUT_LOW); + /* mark the failure */ + bp->ext_phy_config &= + ~PORT_HW_CFG_XGXS_EXT_PHY_TYPE_MASK; + bp->ext_phy_config |= + PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE; + SHMEM_WR(bp, + dev_info.port_hw_config[port]. + external_phy_config, + bp->ext_phy_config); + /* log the failure */ + printk(KERN_ERR PFX "Fan Failure on Network" + " Controller %s has caused the driver to" + " shutdown the card to prevent permanent" + " damage. Please contact Dell Support for" + " assistance\n", bp->dev->name); + break; + + default: + break; + } + } +} + +static inline void bnx2x_attn_int_deasserted1(struct bnx2x *bp, u32 attn) +{ + u32 val; + + if (attn & BNX2X_DOORQ_ASSERT) { + + val = REG_RD(bp, DORQ_REG_DORQ_INT_STS_CLR); + BNX2X_ERR("DB hw attention 0x%x\n", val); + /* DORQ discard attention */ + if (val & 0x2) + BNX2X_ERR("FATAL error from DORQ\n"); + } +} + +static inline void bnx2x_attn_int_deasserted2(struct bnx2x *bp, u32 attn) +{ + u32 val; + + if (attn & AEU_INPUTS_ATTN_BITS_CFC_HW_INTERRUPT) { + + val = REG_RD(bp, CFC_REG_CFC_INT_STS_CLR); + BNX2X_ERR("CFC hw attention 0x%x\n", val); + /* CFC error attention */ + if (val & 0x2) + BNX2X_ERR("FATAL error from CFC\n"); + } + + if (attn & AEU_INPUTS_ATTN_BITS_PXP_HW_INTERRUPT) { + + val = REG_RD(bp, PXP_REG_PXP_INT_STS_CLR_0); + BNX2X_ERR("PXP hw attention 0x%x\n", val); + /* RQ_USDMDP_FIFO_OVERFLOW */ + if (val & 0x18000) + BNX2X_ERR("FATAL error from PXP\n"); + } +} + +static inline void bnx2x_attn_int_deasserted3(struct bnx2x *bp, u32 attn) +{ + if (attn & EVEREST_GEN_ATTN_IN_USE_MASK) { + + if (attn & BNX2X_MC_ASSERT_BITS) { + + BNX2X_ERR("MC assert!\n"); + REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_10, 0); + REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_9, 0); + REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_8, 0); + REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_7, 0); + bnx2x_panic(); + + } else if (attn & BNX2X_MCP_ASSERT) { + + BNX2X_ERR("MCP assert!\n"); + REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_11, 0); + bnx2x_mc_assert(bp); + + } else + BNX2X_ERR("Unknown HW assert! (attn 0x%x)\n", attn); + } + + if (attn & EVEREST_LATCHED_ATTN_IN_USE_MASK) { + + REG_WR(bp, MISC_REG_AEU_CLR_LATCH_SIGNAL, 0x7ff); + BNX2X_ERR("LATCHED attention 0x%x (masked)\n", attn); + } +} + +static void bnx2x_attn_int_deasserted(struct bnx2x *bp, u32 deasserted) +{ struct attn_route attn; struct attn_route group_mask; + int port = bp->port; + int index; u32 reg_addr; u32 val; @@ -3391,64 +4310,14 @@ static void bnx2x_attn_int_deasserted(struct bnx2x *bp, u32 deasserted) DP(NETIF_MSG_HW, "group[%d]: %llx\n", index, (unsigned long long)group_mask.sig[0]); - if (attn.sig[3] & group_mask.sig[3] & - EVEREST_GEN_ATTN_IN_USE_MASK) { - - if (attn.sig[3] & BNX2X_MC_ASSERT_BITS) { - - BNX2X_ERR("MC assert!\n"); - bnx2x_panic(); - - } else if (attn.sig[3] & BNX2X_MCP_ASSERT) { - - BNX2X_ERR("MCP assert!\n"); - REG_WR(bp, - MISC_REG_AEU_GENERAL_ATTN_11, 0); - bnx2x_mc_assert(bp); - - } else { - BNX2X_ERR("UNKOWEN HW ASSERT!\n"); - } - } - - if (attn.sig[1] & group_mask.sig[1] & - BNX2X_DOORQ_ASSERT) { - - val = REG_RD(bp, DORQ_REG_DORQ_INT_STS_CLR); - BNX2X_ERR("DB hw attention 0x%x\n", val); - /* DORQ discard attention */ - if (val & 0x2) - BNX2X_ERR("FATAL error from DORQ\n"); - } - - if (attn.sig[2] & group_mask.sig[2] & - AEU_INPUTS_ATTN_BITS_CFC_HW_INTERRUPT) { - - val = REG_RD(bp, CFC_REG_CFC_INT_STS_CLR); - BNX2X_ERR("CFC hw attention 0x%x\n", val); - /* CFC error attention */ - if (val & 0x2) - BNX2X_ERR("FATAL error from CFC\n"); - } - - if (attn.sig[2] & group_mask.sig[2] & - AEU_INPUTS_ATTN_BITS_PXP_HW_INTERRUPT) { - - val = REG_RD(bp, PXP_REG_PXP_INT_STS_CLR_0); - BNX2X_ERR("PXP hw attention 0x%x\n", val); - /* RQ_USDMDP_FIFO_OVERFLOW */ - if (val & 0x18000) - BNX2X_ERR("FATAL error from PXP\n"); - } - - if (attn.sig[3] & group_mask.sig[3] & - EVEREST_LATCHED_ATTN_IN_USE_MASK) { - - REG_WR(bp, MISC_REG_AEU_CLR_LATCH_SIGNAL, - 0x7ff); - DP(NETIF_MSG_HW, "got latched bits 0x%x\n", - attn.sig[3]); - } + bnx2x_attn_int_deasserted3(bp, + attn.sig[3] & group_mask.sig[3]); + bnx2x_attn_int_deasserted1(bp, + attn.sig[1] & group_mask.sig[1]); + bnx2x_attn_int_deasserted2(bp, + attn.sig[2] & group_mask.sig[2]); + bnx2x_attn_int_deasserted0(bp, + attn.sig[0] & group_mask.sig[0]); if ((attn.sig[0] & group_mask.sig[0] & HW_INTERRUT_ASSERT_SET_0) || @@ -3456,7 +4325,15 @@ static void bnx2x_attn_int_deasserted(struct bnx2x *bp, u32 deasserted) HW_INTERRUT_ASSERT_SET_1) || (attn.sig[2] & group_mask.sig[2] & HW_INTERRUT_ASSERT_SET_2)) - BNX2X_ERR("FATAL HW block attention\n"); + BNX2X_ERR("FATAL HW block attention" + " set0 0x%x set1 0x%x" + " set2 0x%x\n", + (attn.sig[0] & group_mask.sig[0] & + HW_INTERRUT_ASSERT_SET_0), + (attn.sig[1] & group_mask.sig[1] & + HW_INTERRUT_ASSERT_SET_1), + (attn.sig[2] & group_mask.sig[2] & + HW_INTERRUT_ASSERT_SET_2)); if ((attn.sig[0] & group_mask.sig[0] & HW_PRTY_ASSERT_SET_0) || @@ -3464,7 +4341,7 @@ static void bnx2x_attn_int_deasserted(struct bnx2x *bp, u32 deasserted) HW_PRTY_ASSERT_SET_1) || (attn.sig[2] & group_mask.sig[2] & HW_PRTY_ASSERT_SET_2)) - BNX2X_ERR("FATAL HW block parity atention\n"); + BNX2X_ERR("FATAL HW block parity attention\n"); } } @@ -3529,7 +4406,7 @@ static void bnx2x_sp_task(struct work_struct *work) /* Return here if interrupt is disabled */ if (unlikely(atomic_read(&bp->intr_sem) != 0)) { - DP(NETIF_MSG_INTR, "called but intr_sem not 0, returning\n"); + DP(BNX2X_MSG_SP, "called but intr_sem not 0, returning\n"); return; } @@ -3539,12 +4416,11 @@ static void bnx2x_sp_task(struct work_struct *work) DP(NETIF_MSG_INTR, "got a slowpath interrupt (updated %x)\n", status); - if (status & 0x1) { - /* HW attentions */ + /* HW attentions */ + if (status & 0x1) bnx2x_attn_int(bp); - } - /* CStorm events: query_stats, cfc delete ramrods */ + /* CStorm events: query_stats, port delete ramrod */ if (status & 0x2) bp->stat_pending = 0; @@ -3558,6 +4434,7 @@ static void bnx2x_sp_task(struct work_struct *work) IGU_INT_NOP, 1); bnx2x_ack_sb(bp, DEF_SB_ID, TSTORM_ID, le16_to_cpu(bp->def_t_idx), IGU_INT_ENABLE, 1); + } static irqreturn_t bnx2x_msix_sp_int(int irq, void *dev_instance) @@ -3567,11 +4444,11 @@ static irqreturn_t bnx2x_msix_sp_int(int irq, void *dev_instance) /* Return here if interrupt is disabled */ if (unlikely(atomic_read(&bp->intr_sem) != 0)) { - DP(NETIF_MSG_INTR, "called but intr_sem not 0, returning\n"); + DP(BNX2X_MSG_SP, "called but intr_sem not 0, returning\n"); return IRQ_HANDLED; } - bnx2x_ack_sb(bp, 16, XSTORM_ID, 0, IGU_INT_DISABLE, 0); + bnx2x_ack_sb(bp, DEF_SB_ID, XSTORM_ID, 0, IGU_INT_DISABLE, 0); #ifdef BNX2X_STOP_ON_ERROR if (unlikely(bp->panic)) @@ -3906,7 +4783,7 @@ static void bnx2x_stop_stats(struct bnx2x *bp) while (bp->stats_state != STATS_STATE_DISABLE) { if (!timeout) { - BNX2X_ERR("timeout wating for stats stop\n"); + BNX2X_ERR("timeout waiting for stats stop\n"); break; } timeout--; @@ -4173,39 +5050,37 @@ static void bnx2x_update_net_stats(struct bnx2x *bp) nstats->rx_bytes = bnx2x_hilo(&estats->total_bytes_received_hi); - nstats->tx_bytes = - bnx2x_hilo(&estats->total_bytes_transmitted_hi); + nstats->tx_bytes = bnx2x_hilo(&estats->total_bytes_transmitted_hi); - nstats->rx_dropped = estats->checksum_discard + - estats->mac_discard; + nstats->rx_dropped = estats->checksum_discard + estats->mac_discard; nstats->tx_dropped = 0; nstats->multicast = bnx2x_hilo(&estats->total_multicast_packets_transmitted_hi); - nstats->collisions = - estats->single_collision_transmit_frames + - estats->multiple_collision_transmit_frames + - estats->late_collision_frames + - estats->excessive_collision_frames; + nstats->collisions = estats->single_collision_transmit_frames + + estats->multiple_collision_transmit_frames + + estats->late_collision_frames + + estats->excessive_collision_frames; nstats->rx_length_errors = estats->runt_packets_received + estats->jabber_packets_received; - nstats->rx_over_errors = estats->no_buff_discard; + nstats->rx_over_errors = estats->brb_discard + + estats->brb_truncate_discard; nstats->rx_crc_errors = estats->crc_receive_errors; nstats->rx_frame_errors = estats->alignment_errors; - nstats->rx_fifo_errors = estats->brb_discard + - estats->brb_truncate_discard; + nstats->rx_fifo_errors = estats->no_buff_discard; nstats->rx_missed_errors = estats->xxoverflow_discard; nstats->rx_errors = nstats->rx_length_errors + nstats->rx_over_errors + nstats->rx_crc_errors + nstats->rx_frame_errors + - nstats->rx_fifo_errors; + nstats->rx_fifo_errors + + nstats->rx_missed_errors; nstats->tx_aborted_errors = estats->late_collision_frames + - estats->excessive_collision_frames; + estats->excessive_collision_frames; nstats->tx_carrier_errors = estats->false_carrier_detections; nstats->tx_fifo_errors = 0; nstats->tx_heartbeat_errors = 0; @@ -4334,7 +5209,7 @@ static void bnx2x_timer(unsigned long data) return; if (atomic_read(&bp->intr_sem) != 0) - goto bnx2x_restart_timer; + goto timer_restart; if (poll) { struct bnx2x_fastpath *fp = &bp->fp[0]; @@ -4344,7 +5219,7 @@ static void bnx2x_timer(unsigned long data) rc = bnx2x_rx_int(fp, 1000); } - if (!nomcp && (bp->bc_ver >= 0x040003)) { + if (!nomcp) { int port = bp->port; u32 drv_pulse; u32 mcp_pulse; @@ -4353,9 +5228,9 @@ static void bnx2x_timer(unsigned long data) bp->fw_drv_pulse_wr_seq &= DRV_PULSE_SEQ_MASK; /* TBD - add SYSTEM_TIME */ drv_pulse = bp->fw_drv_pulse_wr_seq; - SHMEM_WR(bp, drv_fw_mb[port].drv_pulse_mb, drv_pulse); + SHMEM_WR(bp, func_mb[port].drv_pulse_mb, drv_pulse); - mcp_pulse = (SHMEM_RD(bp, drv_fw_mb[port].mcp_pulse_mb) & + mcp_pulse = (SHMEM_RD(bp, func_mb[port].mcp_pulse_mb) & MCP_PULSE_SEQ_MASK); /* The delta between driver pulse and mcp response * should be 1 (before mcp response) or 0 (after mcp response) @@ -4369,11 +5244,11 @@ static void bnx2x_timer(unsigned long data) } if (bp->stats_state == STATS_STATE_DISABLE) - goto bnx2x_restart_timer; + goto timer_restart; bnx2x_update_stats(bp); -bnx2x_restart_timer: +timer_restart: mod_timer(&bp->timer, jiffies + bp->current_interval); } @@ -4438,6 +5313,9 @@ static void bnx2x_init_def_sb(struct bnx2x *bp, atten_status_block); def_sb->atten_status_block.status_block_id = id; + bp->def_att_idx = 0; + bp->attn_state = 0; + reg_offset = (port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0 : MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0); @@ -4472,6 +5350,8 @@ static void bnx2x_init_def_sb(struct bnx2x *bp, u_def_status_block); def_sb->u_def_status_block.status_block_id = id; + bp->def_u_idx = 0; + REG_WR(bp, BAR_USTRORM_INTMEM + USTORM_DEF_SB_HOST_SB_ADDR_OFFSET(port), U64_LO(section)); REG_WR(bp, BAR_USTRORM_INTMEM + @@ -4489,6 +5369,8 @@ static void bnx2x_init_def_sb(struct bnx2x *bp, c_def_status_block); def_sb->c_def_status_block.status_block_id = id; + bp->def_c_idx = 0; + REG_WR(bp, BAR_CSTRORM_INTMEM + CSTORM_DEF_SB_HOST_SB_ADDR_OFFSET(port), U64_LO(section)); REG_WR(bp, BAR_CSTRORM_INTMEM + @@ -4506,6 +5388,8 @@ static void bnx2x_init_def_sb(struct bnx2x *bp, t_def_status_block); def_sb->t_def_status_block.status_block_id = id; + bp->def_t_idx = 0; + REG_WR(bp, BAR_TSTRORM_INTMEM + TSTORM_DEF_SB_HOST_SB_ADDR_OFFSET(port), U64_LO(section)); REG_WR(bp, BAR_TSTRORM_INTMEM + @@ -4523,6 +5407,8 @@ static void bnx2x_init_def_sb(struct bnx2x *bp, x_def_status_block); def_sb->x_def_status_block.status_block_id = id; + bp->def_x_idx = 0; + REG_WR(bp, BAR_XSTRORM_INTMEM + XSTORM_DEF_SB_HOST_SB_ADDR_OFFSET(port), U64_LO(section)); REG_WR(bp, BAR_XSTRORM_INTMEM + @@ -4535,6 +5421,8 @@ static void bnx2x_init_def_sb(struct bnx2x *bp, REG_WR16(bp, BAR_XSTRORM_INTMEM + XSTORM_DEF_SB_HC_DISABLE_OFFSET(port, index), 0x1); + bp->stat_pending = 0; + bnx2x_ack_sb(bp, id, CSTORM_ID, 0, IGU_INT_ENABLE, 0); } @@ -4626,7 +5514,7 @@ static void bnx2x_init_rx_rings(struct bnx2x *bp) fp->rx_bd_prod = fp->rx_comp_prod = ring_prod; fp->rx_pkt = fp->rx_calls = 0; - /* Warning! this will genrate an interrupt (to the TSTORM) */ + /* Warning! this will generate an interrupt (to the TSTORM) */ /* must only be done when chip is initialized */ REG_WR(bp, BAR_TSTRORM_INTMEM + TSTORM_RCQ_PROD_OFFSET(port, j), ring_prod); @@ -4678,7 +5566,6 @@ static void bnx2x_init_sp_ring(struct bnx2x *bp) bp->spq_left = MAX_SPQ_PENDING; bp->spq_prod_idx = 0; - bp->dsb_sp_prod_idx = 0; bp->dsb_sp_prod = BNX2X_SP_DSB_INDEX; bp->spq_prod_bd = bp->spq; bp->spq_last_bd = bp->spq_prod_bd + MAX_SP_DESC_CNT; @@ -4755,6 +5642,42 @@ static void bnx2x_init_ind_table(struct bnx2x *bp) REG_WR(bp, PRS_REG_A_PRSU_20, 0xf); } +static void bnx2x_set_client_config(struct bnx2x *bp) +{ +#ifdef BCM_VLAN + int mode = bp->rx_mode; +#endif + int i, port = bp->port; + struct tstorm_eth_client_config tstorm_client = {0}; + + tstorm_client.mtu = bp->dev->mtu; + tstorm_client.statistics_counter_id = 0; + tstorm_client.config_flags = + TSTORM_ETH_CLIENT_CONFIG_STATSITICS_ENABLE; +#ifdef BCM_VLAN + if (mode && bp->vlgrp) { + tstorm_client.config_flags |= + TSTORM_ETH_CLIENT_CONFIG_VLAN_REMOVAL_ENABLE; + DP(NETIF_MSG_IFUP, "vlan removal enabled\n"); + } +#endif + if (mode != BNX2X_RX_MODE_PROMISC) + tstorm_client.drop_flags = + TSTORM_ETH_CLIENT_CONFIG_DROP_MAC_ERR; + + for_each_queue(bp, i) { + REG_WR(bp, BAR_TSTRORM_INTMEM + + TSTORM_CLIENT_CONFIG_OFFSET(port, i), + ((u32 *)&tstorm_client)[0]); + REG_WR(bp, BAR_TSTRORM_INTMEM + + TSTORM_CLIENT_CONFIG_OFFSET(port, i) + 4, + ((u32 *)&tstorm_client)[1]); + } + +/* DP(NETIF_MSG_IFUP, "tstorm_client: 0x%08x 0x%08x\n", + ((u32 *)&tstorm_client)[0], ((u32 *)&tstorm_client)[1]); */ +} + static void bnx2x_set_storm_rx_mode(struct bnx2x *bp) { int mode = bp->rx_mode; @@ -4794,41 +5717,9 @@ static void bnx2x_set_storm_rx_mode(struct bnx2x *bp) /* DP(NETIF_MSG_IFUP, "tstorm_mac_filter[%d]: 0x%08x\n", i, ((u32 *)&tstorm_mac_filter)[i]); */ } -} -static void bnx2x_set_client_config(struct bnx2x *bp, int client_id) -{ -#ifdef BCM_VLAN - int mode = bp->rx_mode; -#endif - int port = bp->port; - struct tstorm_eth_client_config tstorm_client = {0}; - - tstorm_client.mtu = bp->dev->mtu; - tstorm_client.statistics_counter_id = 0; - tstorm_client.config_flags = - TSTORM_ETH_CLIENT_CONFIG_STATSITICS_ENABLE; -#ifdef BCM_VLAN - if (mode && bp->vlgrp) { - tstorm_client.config_flags |= - TSTORM_ETH_CLIENT_CONFIG_VLAN_REMOVAL_ENABLE; - DP(NETIF_MSG_IFUP, "vlan removal enabled\n"); - } -#endif - tstorm_client.drop_flags = (TSTORM_ETH_CLIENT_CONFIG_DROP_IP_CS_ERR | - TSTORM_ETH_CLIENT_CONFIG_DROP_TCP_CS_ERR | - TSTORM_ETH_CLIENT_CONFIG_DROP_UDP_CS_ERR | - TSTORM_ETH_CLIENT_CONFIG_DROP_MAC_ERR); - - REG_WR(bp, BAR_TSTRORM_INTMEM + - TSTORM_CLIENT_CONFIG_OFFSET(port, client_id), - ((u32 *)&tstorm_client)[0]); - REG_WR(bp, BAR_TSTRORM_INTMEM + - TSTORM_CLIENT_CONFIG_OFFSET(port, client_id) + 4, - ((u32 *)&tstorm_client)[1]); - -/* DP(NETIF_MSG_IFUP, "tstorm_client: 0x%08x 0x%08x\n", - ((u32 *)&tstorm_client)[0], ((u32 *)&tstorm_client)[1]); */ + if (mode != BNX2X_RX_MODE_NONE) + bnx2x_set_client_config(bp); } static void bnx2x_init_internal(struct bnx2x *bp) @@ -4836,7 +5727,6 @@ static void bnx2x_init_internal(struct bnx2x *bp) int port = bp->port; struct tstorm_eth_function_common_config tstorm_config = {0}; struct stats_indication_flags stats_flags = {0}; - int i; if (is_multi(bp)) { tstorm_config.config_flags = MULTI_FLAGS; @@ -4850,13 +5740,9 @@ static void bnx2x_init_internal(struct bnx2x *bp) /* DP(NETIF_MSG_IFUP, "tstorm_config: 0x%08x\n", (*(u32 *)&tstorm_config)); */ - bp->rx_mode = BNX2X_RX_MODE_NONE; /* no rx untill link is up */ + bp->rx_mode = BNX2X_RX_MODE_NONE; /* no rx until link is up */ bnx2x_set_storm_rx_mode(bp); - for_each_queue(bp, i) - bnx2x_set_client_config(bp, i); - - stats_flags.collect_eth = cpu_to_le32(1); REG_WR(bp, BAR_XSTRORM_INTMEM + XSTORM_STATS_FLAGS_OFFSET(port), @@ -4902,7 +5788,7 @@ static void bnx2x_nic_init(struct bnx2x *bp) bnx2x_init_internal(bp); bnx2x_init_stats(bp); bnx2x_init_ind_table(bp); - bnx2x_enable_int(bp); + bnx2x_int_enable(bp); } @@ -5265,8 +6151,10 @@ static int bnx2x_function_init(struct bnx2x *bp, int mode) if (mode & 0x1) { /* init common */ DP(BNX2X_MSG_MCP, "starting common init func %d mode %x\n", func, mode); - REG_WR(bp, MISC_REG_RESET_REG_1, 0xffffffff); - REG_WR(bp, MISC_REG_RESET_REG_2, 0xfffc); + REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, + 0xffffffff); + REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, + 0xfffc); bnx2x_init_block(bp, MISC_COMMON_START, MISC_COMMON_END); REG_WR(bp, MISC_REG_LCPLL_CTRL_REG_2, 0x100); @@ -5359,7 +6247,7 @@ static int bnx2x_function_init(struct bnx2x *bp, int mode) REG_RD(bp, USEM_REG_PASSIVE_BUFFER + 8); #endif bnx2x_init_block(bp, QM_COMMON_START, QM_COMMON_END); - /* softrest pulse */ + /* soft reset pulse */ REG_WR(bp, QM_REG_SOFT_RESET, 1); REG_WR(bp, QM_REG_SOFT_RESET, 0); @@ -5413,7 +6301,7 @@ static int bnx2x_function_init(struct bnx2x *bp, int mode) REG_WR(bp, SRC_REG_SOFT_RST, 1); for (i = SRC_REG_KEYRSS0_0; i <= SRC_REG_KEYRSS1_9; i += 4) { REG_WR(bp, i, 0xc0cac01a); - /* TODO: repleace with something meaningfull */ + /* TODO: replace with something meaningful */ } /* SRCH COMMON comes here */ REG_WR(bp, SRC_REG_SOFT_RST, 0); @@ -5486,6 +6374,28 @@ static int bnx2x_function_init(struct bnx2x *bp, int mode) enable_blocks_attention(bp); /* enable_blocks_parity(bp); */ + switch (bp->board & SHARED_HW_CFG_BOARD_TYPE_MASK) { + case SHARED_HW_CFG_BOARD_TYPE_BCM957710A1022G: + /* Fan failure is indicated by SPIO 5 */ + bnx2x_set_spio(bp, MISC_REGISTERS_SPIO_5, + MISC_REGISTERS_SPIO_INPUT_HI_Z); + + /* set to active low mode */ + val = REG_RD(bp, MISC_REG_SPIO_INT); + val |= ((1 << MISC_REGISTERS_SPIO_5) << + MISC_REGISTERS_SPIO_INT_OLD_SET_POS); + REG_WR(bp, MISC_REG_SPIO_INT, val); + + /* enable interrupt to signal the IGU */ + val = REG_RD(bp, MISC_REG_SPIO_EVENT_EN); + val |= (1 << MISC_REGISTERS_SPIO_5); + REG_WR(bp, MISC_REG_SPIO_EVENT_EN, val); + break; + + default: + break; + } + } /* end of common init */ /* per port init */ @@ -5645,9 +6555,21 @@ static int bnx2x_function_init(struct bnx2x *bp, int mode) /* Port MCP comes here */ /* Port DMAE comes here */ + switch (bp->board & SHARED_HW_CFG_BOARD_TYPE_MASK) { + case SHARED_HW_CFG_BOARD_TYPE_BCM957710A1022G: + /* add SPIO 5 to group 0 */ + val = REG_RD(bp, MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0); + val |= AEU_INPUTS_ATTN_BITS_SPIO5; + REG_WR(bp, MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0, val); + break; + + default: + break; + } + bnx2x_link_reset(bp); - /* Reset pciex errors for debug */ + /* Reset PCIE errors for debug */ REG_WR(bp, 0x2114, 0xffffffff); REG_WR(bp, 0x2120, 0xffffffff); REG_WR(bp, 0x2814, 0xffffffff); @@ -5669,9 +6591,9 @@ static int bnx2x_function_init(struct bnx2x *bp, int mode) port = bp->port; bp->fw_drv_pulse_wr_seq = - (SHMEM_RD(bp, drv_fw_mb[port].drv_pulse_mb) & + (SHMEM_RD(bp, func_mb[port].drv_pulse_mb) & DRV_PULSE_SEQ_MASK); - bp->fw_mb = SHMEM_RD(bp, drv_fw_mb[port].fw_mb_param); + bp->fw_mb = SHMEM_RD(bp, func_mb[port].fw_mb_param); DP(BNX2X_MSG_MCP, "drv_pulse 0x%x fw_mb 0x%x\n", bp->fw_drv_pulse_wr_seq, bp->fw_mb); } else { @@ -5681,16 +6603,15 @@ static int bnx2x_function_init(struct bnx2x *bp, int mode) return 0; } - -/* send the MCP a request, block untill there is a reply */ +/* send the MCP a request, block until there is a reply */ static u32 bnx2x_fw_command(struct bnx2x *bp, u32 command) { - u32 rc = 0; - u32 seq = ++bp->fw_seq; int port = bp->port; + u32 seq = ++bp->fw_seq; + u32 rc = 0; - SHMEM_WR(bp, drv_fw_mb[port].drv_mb_header, command|seq); - DP(BNX2X_MSG_MCP, "wrote command (%x) to FW MB\n", command|seq); + SHMEM_WR(bp, func_mb[port].drv_mb_header, (command | seq)); + DP(BNX2X_MSG_MCP, "wrote command (%x) to FW MB\n", (command | seq)); /* let the FW do it's magic ... */ msleep(100); /* TBD */ @@ -5698,19 +6619,20 @@ static u32 bnx2x_fw_command(struct bnx2x *bp, u32 command) if (CHIP_REV_IS_SLOW(bp)) msleep(900); - rc = SHMEM_RD(bp, drv_fw_mb[port].fw_mb_header); - + rc = SHMEM_RD(bp, func_mb[port].fw_mb_header); DP(BNX2X_MSG_MCP, "read (%x) seq is (%x) from FW MB\n", rc, seq); /* is this a reply to our command? */ if (seq == (rc & FW_MSG_SEQ_NUMBER_MASK)) { rc &= FW_MSG_CODE_MASK; + } else { /* FW BUG! */ BNX2X_ERR("FW failed to respond!\n"); bnx2x_fw_dump(bp); rc = 0; } + return rc; } @@ -5869,7 +6791,7 @@ static int bnx2x_alloc_mem(struct bnx2x *bp) for (i = 0; i < 16*1024; i += 64) * (u64 *)((char *)bp->t2 + i + 56) = bp->t2_mapping + i + 64; - /* now sixup the last line in the block to point to the next block */ + /* now fixup the last line in the block to point to the next block */ *(u64 *)((char *)bp->t2 + 1024*16-8) = bp->t2_mapping; /* Timer block array (MAX_CONN*8) phys uncached for now 1024 conns */ @@ -5950,22 +6872,19 @@ static void bnx2x_free_msix_irqs(struct bnx2x *bp) int i; free_irq(bp->msix_table[0].vector, bp->dev); - DP(NETIF_MSG_IFDOWN, "rleased sp irq (%d)\n", + DP(NETIF_MSG_IFDOWN, "released sp irq (%d)\n", bp->msix_table[0].vector); for_each_queue(bp, i) { - DP(NETIF_MSG_IFDOWN, "about to rlease fp #%d->%d irq " + DP(NETIF_MSG_IFDOWN, "about to release fp #%d->%d irq " "state(%x)\n", i, bp->msix_table[i + 1].vector, bnx2x_fp(bp, i, state)); - if (bnx2x_fp(bp, i, state) != BNX2X_FP_STATE_CLOSED) { - - free_irq(bp->msix_table[i + 1].vector, &bp->fp[i]); - bnx2x_fp(bp, i, state) = BNX2X_FP_STATE_CLOSED; - - } else - DP(NETIF_MSG_IFDOWN, "irq not freed\n"); + if (bnx2x_fp(bp, i, state) != BNX2X_FP_STATE_CLOSED) + BNX2X_ERR("IRQ of fp #%d being freed while " + "state != closed\n", i); + free_irq(bp->msix_table[i + 1].vector, &bp->fp[i]); } } @@ -5995,7 +6914,7 @@ static int bnx2x_enable_msix(struct bnx2x *bp) if (pci_enable_msix(bp->pdev, &bp->msix_table[0], bp->num_queues + 1)){ - BNX2X_ERR("failed to enable msix\n"); + BNX2X_LOG("failed to enable MSI-X\n"); return -1; } @@ -6010,11 +6929,8 @@ static int bnx2x_enable_msix(struct bnx2x *bp) static int bnx2x_req_msix_irqs(struct bnx2x *bp) { - int i, rc; - DP(NETIF_MSG_IFUP, "about to request sp irq\n"); - rc = request_irq(bp->msix_table[0].vector, bnx2x_msix_sp_int, 0, bp->dev->name, bp->dev); @@ -6029,7 +6945,8 @@ static int bnx2x_req_msix_irqs(struct bnx2x *bp) bp->dev->name, &bp->fp[i]); if (rc) { - BNX2X_ERR("request fp #%d irq failed\n", i); + BNX2X_ERR("request fp #%d irq failed " + "rc %d\n", i, rc); bnx2x_free_msix_irqs(bp); return -EBUSY; } @@ -6109,8 +7026,8 @@ static int bnx2x_wait_ramrod(struct bnx2x *bp, int state, int idx, /* can take a while if any port is running */ int timeout = 500; - /* DP("waiting for state to become %d on IDX [%d]\n", - state, sb_idx); */ + DP(NETIF_MSG_IFUP, "%s for state to become %x on IDX [%d]\n", + poll ? "polling" : "waiting", state, idx); might_sleep(); @@ -6128,7 +7045,7 @@ static int bnx2x_wait_ramrod(struct bnx2x *bp, int state, int idx, mb(); /* state is changed by bnx2x_sp_event()*/ - if (*state_p != state) + if (*state_p == state) return 0; timeout--; @@ -6136,17 +7053,17 @@ static int bnx2x_wait_ramrod(struct bnx2x *bp, int state, int idx, } - /* timeout! */ - BNX2X_ERR("timeout waiting for ramrod %d on %d\n", state, idx); - return -EBUSY; + BNX2X_ERR("timeout %s for state %x on IDX [%d]\n", + poll ? "polling" : "waiting", state, idx); + return -EBUSY; } static int bnx2x_setup_leading(struct bnx2x *bp) { - /* reset IGU staae */ + /* reset IGU state */ bnx2x_ack_sb(bp, DEF_SB_ID, CSTORM_ID, 0, IGU_INT_ENABLE, 0); /* SETUP ramrod */ @@ -6162,12 +7079,13 @@ static int bnx2x_setup_multi(struct bnx2x *bp, int index) /* reset IGU state */ bnx2x_ack_sb(bp, index, CSTORM_ID, 0, IGU_INT_ENABLE, 0); + /* SETUP ramrod */ bp->fp[index].state = BNX2X_FP_STATE_OPENING; bnx2x_sp_post(bp, RAMROD_CMD_ID_ETH_CLIENT_SETUP, index, 0, index, 0); /* Wait for completion */ return bnx2x_wait_ramrod(bp, BNX2X_FP_STATE_OPEN, index, - &(bp->fp[index].state), 1); + &(bp->fp[index].state), 0); } @@ -6177,8 +7095,8 @@ static void bnx2x_set_rx_mode(struct net_device *dev); static int bnx2x_nic_load(struct bnx2x *bp, int req_irq) { - int rc; - int i = 0; + u32 load_code; + int i; bp->state = BNX2X_STATE_OPENING_WAIT4_LOAD; @@ -6188,26 +7106,28 @@ static int bnx2x_nic_load(struct bnx2x *bp, int req_irq) initialized, otherwise - not. */ if (!nomcp) { - rc = bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_REQ); - if (rc == FW_MSG_CODE_DRV_LOAD_REFUSED) { + load_code = bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_REQ); + if (!load_code) { + BNX2X_ERR("MCP response failure, unloading\n"); + return -EBUSY; + } + if (load_code == FW_MSG_CODE_DRV_LOAD_REFUSED) { + BNX2X_ERR("MCP refused load request, unloading\n"); return -EBUSY; /* other port in diagnostic mode */ } } else { - rc = FW_MSG_CODE_DRV_LOAD_COMMON; + load_code = FW_MSG_CODE_DRV_LOAD_COMMON; } - DP(NETIF_MSG_IFUP, "set number of queues to %d\n", bp->num_queues); - /* if we can't use msix we only need one fp, * so try to enable msix with the requested number of fp's * and fallback to inta with one fp */ if (req_irq) { - if (use_inta) { bp->num_queues = 1; } else { - if (use_multi > 1 && use_multi <= 16) + if ((use_multi > 1) && (use_multi <= 16)) /* user requested number */ bp->num_queues = use_multi; else if (use_multi == 1) @@ -6216,15 +7136,17 @@ static int bnx2x_nic_load(struct bnx2x *bp, int req_irq) bp->num_queues = 1; if (bnx2x_enable_msix(bp)) { - /* faild to enable msix */ + /* failed to enable msix */ bp->num_queues = 1; if (use_multi) - BNX2X_ERR("Muti requested but failed" + BNX2X_ERR("Multi requested but failed" " to enable MSI-X\n"); } } } + DP(NETIF_MSG_IFUP, "set number of queues to %d\n", bp->num_queues); + if (bnx2x_alloc_mem(bp)) return -ENOMEM; @@ -6232,13 +7154,13 @@ static int bnx2x_nic_load(struct bnx2x *bp, int req_irq) if (bp->flags & USING_MSIX_FLAG) { if (bnx2x_req_msix_irqs(bp)) { pci_disable_msix(bp->pdev); - goto out_error; + goto load_error; } } else { if (bnx2x_req_irq(bp)) { BNX2X_ERR("IRQ request failed, aborting\n"); - goto out_error; + goto load_error; } } } @@ -6249,31 +7171,25 @@ static int bnx2x_nic_load(struct bnx2x *bp, int req_irq) /* Initialize HW */ - if (bnx2x_function_init(bp, (rc == FW_MSG_CODE_DRV_LOAD_COMMON))) { + if (bnx2x_function_init(bp, + (load_code == FW_MSG_CODE_DRV_LOAD_COMMON))) { BNX2X_ERR("HW init failed, aborting\n"); - goto out_error; + goto load_error; } atomic_set(&bp->intr_sem, 0); - /* Reenable SP tasklet */ - /*if (bp->sp_task_en) { */ - /* tasklet_enable(&bp->sp_task);*/ - /*} else { */ - /* bp->sp_task_en = 1; */ - /*} */ /* Setup NIC internals and enable interrupts */ bnx2x_nic_init(bp); /* Send LOAD_DONE command to MCP */ if (!nomcp) { - rc = bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_DONE); - DP(NETIF_MSG_IFUP, "rc = 0x%x\n", rc); - if (!rc) { + load_code = bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_DONE); + if (!load_code) { BNX2X_ERR("MCP response failure, unloading\n"); - goto int_disable; + goto load_int_disable; } } @@ -6285,11 +7201,11 @@ static int bnx2x_nic_load(struct bnx2x *bp, int req_irq) napi_enable(&bnx2x_fp(bp, i, napi)); if (bnx2x_setup_leading(bp)) - goto stop_netif; + goto load_stop_netif; for_each_nondefault_queue(bp, i) if (bnx2x_setup_multi(bp, i)) - goto stop_netif; + goto load_stop_netif; bnx2x_set_mac_addr(bp); @@ -6313,42 +7229,24 @@ static int bnx2x_nic_load(struct bnx2x *bp, int req_irq) return 0; -stop_netif: +load_stop_netif: for_each_queue(bp, i) napi_disable(&bnx2x_fp(bp, i, napi)); -int_disable: - bnx2x_disable_int_sync(bp); +load_int_disable: + bnx2x_int_disable_sync(bp); bnx2x_free_skbs(bp); bnx2x_free_irq(bp); -out_error: +load_error: bnx2x_free_mem(bp); /* TBD we really need to reset the chip if we want to recover from this */ - return rc; + return -EBUSY; } -static void bnx2x_netif_stop(struct bnx2x *bp) -{ - int i; - - bp->rx_mode = BNX2X_RX_MODE_NONE; - bnx2x_set_storm_rx_mode(bp); - - bnx2x_disable_int_sync(bp); - bnx2x_link_reset(bp); - - for_each_queue(bp, i) - napi_disable(&bnx2x_fp(bp, i, napi)); - - if (netif_running(bp->dev)) { - netif_tx_disable(bp->dev); - bp->dev->trans_start = jiffies; /* prevent tx timeout */ - } -} static void bnx2x_reset_chip(struct bnx2x *bp, u32 reset_code) { @@ -6401,20 +7299,20 @@ static int bnx2x_stop_multi(struct bnx2x *bp, int index) int rc; - /* halt the connnection */ + /* halt the connection */ bp->fp[index].state = BNX2X_FP_STATE_HALTING; bnx2x_sp_post(bp, RAMROD_CMD_ID_ETH_HALT, index, 0, 0, 0); rc = bnx2x_wait_ramrod(bp, BNX2X_FP_STATE_HALTED, index, &(bp->fp[index].state), 1); - if (rc) /* timout */ + if (rc) /* timeout */ return rc; /* delete cfc entry */ bnx2x_sp_post(bp, RAMROD_CMD_ID_ETH_CFC_DEL, index, 0, 0, 1); - return bnx2x_wait_ramrod(bp, BNX2X_FP_STATE_DELETED, index, + return bnx2x_wait_ramrod(bp, BNX2X_FP_STATE_CLOSED, index, &(bp->fp[index].state), 1); } @@ -6422,8 +7320,8 @@ static int bnx2x_stop_multi(struct bnx2x *bp, int index) static void bnx2x_stop_leading(struct bnx2x *bp) { - - /* if the other port is hadling traffic, + u16 dsb_sp_prod_idx; + /* if the other port is handling traffic, this can take a lot of time */ int timeout = 500; @@ -6437,52 +7335,71 @@ static void bnx2x_stop_leading(struct bnx2x *bp) &(bp->fp[0].state), 1)) return; - bp->dsb_sp_prod_idx = *bp->dsb_sp_prod; + dsb_sp_prod_idx = *bp->dsb_sp_prod; - /* Send CFC_DELETE ramrod */ + /* Send PORT_DELETE ramrod */ bnx2x_sp_post(bp, RAMROD_CMD_ID_ETH_PORT_DEL, 0, 0, 0, 1); - /* - Wait for completion. + /* Wait for completion to arrive on default status block we are going to reset the chip anyway so there is not much to do if this times out */ - while (bp->dsb_sp_prod_idx == *bp->dsb_sp_prod && timeout) { - timeout--; - msleep(1); + while ((dsb_sp_prod_idx == *bp->dsb_sp_prod) && timeout) { + timeout--; + msleep(1); } - + if (!timeout) { + DP(NETIF_MSG_IFDOWN, "timeout polling for completion " + "dsb_sp_prod 0x%x != dsb_sp_prod_idx 0x%x\n", + *bp->dsb_sp_prod, dsb_sp_prod_idx); + } + bp->state = BNX2X_STATE_CLOSING_WAIT4_UNLOAD; + bp->fp[0].state = BNX2X_FP_STATE_CLOSED; } -static int bnx2x_nic_unload(struct bnx2x *bp, int fre_irq) + +static int bnx2x_nic_unload(struct bnx2x *bp, int free_irq) { u32 reset_code = 0; - int rc; - int i; + int i, timeout; bp->state = BNX2X_STATE_CLOSING_WAIT4_HALT; - /* Calling flush_scheduled_work() may deadlock because - * linkwatch_event() may be on the workqueue and it will try to get - * the rtnl_lock which we are holding. - */ + del_timer_sync(&bp->timer); - while (bp->in_reset_task) - msleep(1); + bp->rx_mode = BNX2X_RX_MODE_NONE; + bnx2x_set_storm_rx_mode(bp); - /* Delete the timer: do it before disabling interrupts, as it - may be stil STAT_QUERY ramrod pending after stopping the timer */ - del_timer_sync(&bp->timer); + if (netif_running(bp->dev)) { + netif_tx_disable(bp->dev); + bp->dev->trans_start = jiffies; /* prevent tx timeout */ + } + + /* Wait until all fast path tasks complete */ + for_each_queue(bp, i) { + struct bnx2x_fastpath *fp = &bp->fp[i]; + + timeout = 1000; + while (bnx2x_has_work(fp) && (timeout--)) + msleep(1); + if (!timeout) + BNX2X_ERR("timeout waiting for queue[%d]\n", i); + } /* Wait until stat ramrod returns and all SP tasks complete */ - while (bp->stat_pending && (bp->spq_left != MAX_SPQ_PENDING)) + timeout = 1000; + while ((bp->stat_pending || (bp->spq_left != MAX_SPQ_PENDING)) && + (timeout--)) msleep(1); - /* Stop fast path, disable MAC, disable interrupts, disable napi */ - bnx2x_netif_stop(bp); + for_each_queue(bp, i) + napi_disable(&bnx2x_fp(bp, i, napi)); + /* Disable interrupts after Tx and Rx are disabled on stack level */ + bnx2x_int_disable_sync(bp); if (bp->flags & NO_WOL_FLAG) reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_MCP; + else if (bp->wol) { u32 emac_base = bp->port ? GRCBASE_EMAC0 : GRCBASE_EMAC1; u8 *mac_addr = bp->dev->dev_addr; @@ -6499,28 +7416,37 @@ static int bnx2x_nic_unload(struct bnx2x *bp, int fre_irq) EMAC_WR(EMAC_REG_EMAC_MAC_MATCH + 4, val); reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_EN; + } else reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS; + /* Close multi and leading connections */ for_each_nondefault_queue(bp, i) if (bnx2x_stop_multi(bp, i)) - goto error; - + goto unload_error; bnx2x_stop_leading(bp); + if ((bp->state != BNX2X_STATE_CLOSING_WAIT4_UNLOAD) || + (bp->fp[0].state != BNX2X_FP_STATE_CLOSED)) { + DP(NETIF_MSG_IFDOWN, "failed to close leading properly!" + "state 0x%x fp[0].state 0x%x", + bp->state, bp->fp[0].state); + } + +unload_error: + bnx2x_link_reset(bp); -error: if (!nomcp) - rc = bnx2x_fw_command(bp, reset_code); + reset_code = bnx2x_fw_command(bp, reset_code); else - rc = FW_MSG_CODE_DRV_UNLOAD_COMMON; + reset_code = FW_MSG_CODE_DRV_UNLOAD_COMMON; /* Release IRQs */ - if (fre_irq) + if (free_irq) bnx2x_free_irq(bp); /* Reset the chip */ - bnx2x_reset_chip(bp, rc); + bnx2x_reset_chip(bp, reset_code); /* Report UNLOAD_DONE to MCP */ if (!nomcp) @@ -6531,8 +7457,7 @@ error: bnx2x_free_mem(bp); bp->state = BNX2X_STATE_CLOSED; - /* Set link down */ - bp->link_up = 0; + netif_carrier_off(bp->dev); return 0; @@ -6568,7 +7493,7 @@ static void bnx2x_link_settings_supported(struct bnx2x *bp, u32 switch_cfg) SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full | SUPPORTED_1000baseT_Full | - SUPPORTED_2500baseT_Full | + SUPPORTED_2500baseX_Full | SUPPORTED_TP | SUPPORTED_FIBRE | SUPPORTED_Autoneg | SUPPORTED_Pause | @@ -6581,10 +7506,10 @@ static void bnx2x_link_settings_supported(struct bnx2x *bp, u32 switch_cfg) bp->phy_flags |= PHY_SGMII_FLAG; - bp->supported |= (/* SUPPORTED_10baseT_Half | - SUPPORTED_10baseT_Full | - SUPPORTED_100baseT_Half | - SUPPORTED_100baseT_Full |*/ + bp->supported |= (SUPPORTED_10baseT_Half | + SUPPORTED_10baseT_Full | + SUPPORTED_100baseT_Half | + SUPPORTED_100baseT_Full | SUPPORTED_1000baseT_Full | SUPPORTED_TP | SUPPORTED_FIBRE | SUPPORTED_Autoneg | @@ -6620,7 +7545,7 @@ static void bnx2x_link_settings_supported(struct bnx2x *bp, u32 switch_cfg) SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full | SUPPORTED_1000baseT_Full | - SUPPORTED_2500baseT_Full | + SUPPORTED_2500baseX_Full | SUPPORTED_10000baseT_Full | SUPPORTED_TP | SUPPORTED_FIBRE | SUPPORTED_Autoneg | @@ -6629,12 +7554,46 @@ static void bnx2x_link_settings_supported(struct bnx2x *bp, u32 switch_cfg) break; case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705: + BNX2X_DEV_INFO("ext_phy_type 0x%x (8705)\n", + ext_phy_type); + + bp->supported |= (SUPPORTED_10000baseT_Full | + SUPPORTED_FIBRE | + SUPPORTED_Pause | + SUPPORTED_Asym_Pause); + break; + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706: - BNX2X_DEV_INFO("ext_phy_type 0x%x (8705/6)\n", + BNX2X_DEV_INFO("ext_phy_type 0x%x (8706)\n", + ext_phy_type); + + bp->supported |= (SUPPORTED_10000baseT_Full | + SUPPORTED_1000baseT_Full | + SUPPORTED_Autoneg | + SUPPORTED_FIBRE | + SUPPORTED_Pause | + SUPPORTED_Asym_Pause); + break; + + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072: + BNX2X_DEV_INFO("ext_phy_type 0x%x (8072)\n", ext_phy_type); bp->supported |= (SUPPORTED_10000baseT_Full | + SUPPORTED_1000baseT_Full | SUPPORTED_FIBRE | + SUPPORTED_Autoneg | + SUPPORTED_Pause | + SUPPORTED_Asym_Pause); + break; + + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101: + BNX2X_DEV_INFO("ext_phy_type 0x%x (SFX7101)\n", + ext_phy_type); + + bp->supported |= (SUPPORTED_10000baseT_Full | + SUPPORTED_TP | + SUPPORTED_Autoneg | SUPPORTED_Pause | SUPPORTED_Asym_Pause); break; @@ -6691,7 +7650,7 @@ static void bnx2x_link_settings_supported(struct bnx2x *bp, u32 switch_cfg) SUPPORTED_1000baseT_Full); if (!(bp->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G)) - bp->supported &= ~SUPPORTED_2500baseT_Full; + bp->supported &= ~SUPPORTED_2500baseX_Full; if (!(bp->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)) bp->supported &= ~SUPPORTED_10000baseT_Full; @@ -6711,13 +7670,8 @@ static void bnx2x_link_settings_requested(struct bnx2x *bp) bp->req_line_speed = 0; bp->advertising = bp->supported; } else { - u32 ext_phy_type; - - ext_phy_type = XGXS_EXT_PHY_TYPE(bp); - if ((ext_phy_type == - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705) || - (ext_phy_type == - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706)) { + if (XGXS_EXT_PHY_TYPE(bp) == + PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705) { /* force 10G, no AN */ bp->req_line_speed = SPEED_10000; bp->advertising = @@ -6734,8 +7688,7 @@ static void bnx2x_link_settings_requested(struct bnx2x *bp) break; case PORT_FEATURE_LINK_SPEED_10M_FULL: - if (bp->speed_cap_mask & - PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL) { + if (bp->supported & SUPPORTED_10baseT_Full) { bp->req_line_speed = SPEED_10; bp->advertising = (ADVERTISED_10baseT_Full | ADVERTISED_TP); @@ -6749,8 +7702,7 @@ static void bnx2x_link_settings_requested(struct bnx2x *bp) break; case PORT_FEATURE_LINK_SPEED_10M_HALF: - if (bp->speed_cap_mask & - PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_HALF) { + if (bp->supported & SUPPORTED_10baseT_Half) { bp->req_line_speed = SPEED_10; bp->req_duplex = DUPLEX_HALF; bp->advertising = (ADVERTISED_10baseT_Half | @@ -6765,8 +7717,7 @@ static void bnx2x_link_settings_requested(struct bnx2x *bp) break; case PORT_FEATURE_LINK_SPEED_100M_FULL: - if (bp->speed_cap_mask & - PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_FULL) { + if (bp->supported & SUPPORTED_100baseT_Full) { bp->req_line_speed = SPEED_100; bp->advertising = (ADVERTISED_100baseT_Full | ADVERTISED_TP); @@ -6780,8 +7731,7 @@ static void bnx2x_link_settings_requested(struct bnx2x *bp) break; case PORT_FEATURE_LINK_SPEED_100M_HALF: - if (bp->speed_cap_mask & - PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_HALF) { + if (bp->supported & SUPPORTED_100baseT_Half) { bp->req_line_speed = SPEED_100; bp->req_duplex = DUPLEX_HALF; bp->advertising = (ADVERTISED_100baseT_Half | @@ -6796,8 +7746,7 @@ static void bnx2x_link_settings_requested(struct bnx2x *bp) break; case PORT_FEATURE_LINK_SPEED_1G: - if (bp->speed_cap_mask & - PORT_HW_CFG_SPEED_CAPABILITY_D0_1G) { + if (bp->supported & SUPPORTED_1000baseT_Full) { bp->req_line_speed = SPEED_1000; bp->advertising = (ADVERTISED_1000baseT_Full | ADVERTISED_TP); @@ -6811,10 +7760,9 @@ static void bnx2x_link_settings_requested(struct bnx2x *bp) break; case PORT_FEATURE_LINK_SPEED_2_5G: - if (bp->speed_cap_mask & - PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G) { + if (bp->supported & SUPPORTED_2500baseX_Full) { bp->req_line_speed = SPEED_2500; - bp->advertising = (ADVERTISED_2500baseT_Full | + bp->advertising = (ADVERTISED_2500baseX_Full | ADVERTISED_TP); } else { BNX2X_ERR("NVRAM config error. " @@ -6828,15 +7776,7 @@ static void bnx2x_link_settings_requested(struct bnx2x *bp) case PORT_FEATURE_LINK_SPEED_10G_CX4: case PORT_FEATURE_LINK_SPEED_10G_KX4: case PORT_FEATURE_LINK_SPEED_10G_KR: - if (!(bp->phy_flags & PHY_XGXS_FLAG)) { - BNX2X_ERR("NVRAM config error. " - "Invalid link_config 0x%x" - " phy_flags 0x%x\n", - bp->link_config, bp->phy_flags); - return; - } - if (bp->speed_cap_mask & - PORT_HW_CFG_SPEED_CAPABILITY_D0_10G) { + if (bp->supported & SUPPORTED_10000baseT_Full) { bp->req_line_speed = SPEED_10000; bp->advertising = (ADVERTISED_10000baseT_Full | ADVERTISED_FIBRE); @@ -6863,43 +7803,13 @@ static void bnx2x_link_settings_requested(struct bnx2x *bp) bp->req_flow_ctrl = (bp->link_config & PORT_FEATURE_FLOW_CONTROL_MASK); - /* Please refer to Table 28B-3 of the 802.3ab-1999 spec */ - switch (bp->req_flow_ctrl) { - case FLOW_CTRL_AUTO: + if ((bp->req_flow_ctrl == FLOW_CTRL_AUTO) && + (bp->supported & SUPPORTED_Autoneg)) bp->req_autoneg |= AUTONEG_FLOW_CTRL; - if (bp->dev->mtu <= 4500) { - bp->pause_mode = PAUSE_BOTH; - bp->advertising |= (ADVERTISED_Pause | - ADVERTISED_Asym_Pause); - } else { - bp->pause_mode = PAUSE_ASYMMETRIC; - bp->advertising |= ADVERTISED_Asym_Pause; - } - break; - - case FLOW_CTRL_TX: - bp->pause_mode = PAUSE_ASYMMETRIC; - bp->advertising |= ADVERTISED_Asym_Pause; - break; - - case FLOW_CTRL_RX: - case FLOW_CTRL_BOTH: - bp->pause_mode = PAUSE_BOTH; - bp->advertising |= (ADVERTISED_Pause | - ADVERTISED_Asym_Pause); - break; - case FLOW_CTRL_NONE: - default: - bp->pause_mode = PAUSE_NONE; - bp->advertising &= ~(ADVERTISED_Pause | - ADVERTISED_Asym_Pause); - break; - } - BNX2X_DEV_INFO("req_autoneg 0x%x req_flow_ctrl 0x%x\n" - KERN_INFO " pause_mode %d advertising 0x%x\n", - bp->req_autoneg, bp->req_flow_ctrl, - bp->pause_mode, bp->advertising); + BNX2X_DEV_INFO("req_autoneg 0x%x req_flow_ctrl 0x%x" + " advertising 0x%x\n", + bp->req_autoneg, bp->req_flow_ctrl, bp->advertising); } static void bnx2x_get_hwinfo(struct bnx2x *bp) @@ -6933,15 +7843,15 @@ static void bnx2x_get_hwinfo(struct bnx2x *bp) val = SHMEM_RD(bp, validity_map[port]); if ((val & (SHR_MEM_VALIDITY_DEV_INFO | SHR_MEM_VALIDITY_MB)) != (SHR_MEM_VALIDITY_DEV_INFO | SHR_MEM_VALIDITY_MB)) - BNX2X_ERR("MCP validity signature bad\n"); + BNX2X_ERR("BAD MCP validity signature\n"); - bp->fw_seq = (SHMEM_RD(bp, drv_fw_mb[port].drv_mb_header) & + bp->fw_seq = (SHMEM_RD(bp, func_mb[port].drv_mb_header) & DRV_MSG_SEQ_NUMBER_MASK); bp->hw_config = SHMEM_RD(bp, dev_info.shared_hw_config.config); - + bp->board = SHMEM_RD(bp, dev_info.shared_hw_config.board); bp->serdes_config = - SHMEM_RD(bp, dev_info.port_hw_config[bp->port].serdes_config); + SHMEM_RD(bp, dev_info.port_hw_config[port].serdes_config); bp->lane_config = SHMEM_RD(bp, dev_info.port_hw_config[port].lane_config); bp->ext_phy_config = @@ -6954,13 +7864,13 @@ static void bnx2x_get_hwinfo(struct bnx2x *bp) bp->link_config = SHMEM_RD(bp, dev_info.port_feature_config[port].link_config); - BNX2X_DEV_INFO("hw_config (%08x) serdes_config (%08x)\n" + BNX2X_DEV_INFO("hw_config (%08x) board (%08x) serdes_config (%08x)\n" KERN_INFO " lane_config (%08x) ext_phy_config (%08x)\n" KERN_INFO " speed_cap_mask (%08x) link_config (%08x)" " fw_seq (%08x)\n", - bp->hw_config, bp->serdes_config, bp->lane_config, - bp->ext_phy_config, bp->speed_cap_mask, - bp->link_config, bp->fw_seq); + bp->hw_config, bp->board, bp->serdes_config, + bp->lane_config, bp->ext_phy_config, + bp->speed_cap_mask, bp->link_config, bp->fw_seq); switch_cfg = (bp->link_config & PORT_FEATURE_CONNECTED_SWITCH_MASK); bnx2x_link_settings_supported(bp, switch_cfg); @@ -7014,14 +7924,8 @@ static void bnx2x_get_hwinfo(struct bnx2x *bp) return; set_mac: /* only supposed to happen on emulation/FPGA */ - BNX2X_ERR("warning constant MAC workaround active\n"); - bp->dev->dev_addr[0] = 0; - bp->dev->dev_addr[1] = 0x50; - bp->dev->dev_addr[2] = 0xc2; - bp->dev->dev_addr[3] = 0x2c; - bp->dev->dev_addr[4] = 0x71; - bp->dev->dev_addr[5] = port ? 0x0d : 0x0e; - + BNX2X_ERR("warning rendom MAC workaround active\n"); + random_ether_addr(bp->dev->dev_addr); memcpy(bp->dev->perm_addr, bp->dev->dev_addr, 6); } @@ -7048,19 +7952,34 @@ static int bnx2x_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) } if (bp->phy_flags & PHY_XGXS_FLAG) { - cmd->port = PORT_FIBRE; - } else { + u32 ext_phy_type = XGXS_EXT_PHY_TYPE(bp); + + switch (ext_phy_type) { + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT: + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705: + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706: + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072: + cmd->port = PORT_FIBRE; + break; + + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101: + cmd->port = PORT_TP; + break; + + default: + DP(NETIF_MSG_LINK, "BAD XGXS ext_phy_config 0x%x\n", + bp->ext_phy_config); + } + } else cmd->port = PORT_TP; - } cmd->phy_address = bp->phy_addr; cmd->transceiver = XCVR_INTERNAL; - if (bp->req_autoneg & AUTONEG_SPEED) { + if (bp->req_autoneg & AUTONEG_SPEED) cmd->autoneg = AUTONEG_ENABLE; - } else { + else cmd->autoneg = AUTONEG_DISABLE; - } cmd->maxtxpkt = 0; cmd->maxrxpkt = 0; @@ -7091,8 +8010,10 @@ static int bnx2x_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) switch (cmd->port) { case PORT_TP: - if (!(bp->supported & SUPPORTED_TP)) + if (!(bp->supported & SUPPORTED_TP)) { + DP(NETIF_MSG_LINK, "TP not supported\n"); return -EINVAL; + } if (bp->phy_flags & PHY_XGXS_FLAG) { bnx2x_link_reset(bp); @@ -7102,8 +8023,10 @@ static int bnx2x_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) break; case PORT_FIBRE: - if (!(bp->supported & SUPPORTED_FIBRE)) + if (!(bp->supported & SUPPORTED_FIBRE)) { + DP(NETIF_MSG_LINK, "FIBRE not supported\n"); return -EINVAL; + } if (!(bp->phy_flags & PHY_XGXS_FLAG)) { bnx2x_link_reset(bp); @@ -7113,12 +8036,15 @@ static int bnx2x_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) break; default: + DP(NETIF_MSG_LINK, "Unknown port type\n"); return -EINVAL; } if (cmd->autoneg == AUTONEG_ENABLE) { - if (!(bp->supported & SUPPORTED_Autoneg)) + if (!(bp->supported & SUPPORTED_Autoneg)) { + DP(NETIF_MSG_LINK, "Aotoneg not supported\n"); return -EINVAL; + } /* advertise the requested speed and duplex if supported */ cmd->advertising &= bp->supported; @@ -7133,14 +8059,22 @@ static int bnx2x_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) switch (cmd->speed) { case SPEED_10: if (cmd->duplex == DUPLEX_FULL) { - if (!(bp->supported & SUPPORTED_10baseT_Full)) + if (!(bp->supported & + SUPPORTED_10baseT_Full)) { + DP(NETIF_MSG_LINK, + "10M full not supported\n"); return -EINVAL; + } advertising = (ADVERTISED_10baseT_Full | ADVERTISED_TP); } else { - if (!(bp->supported & SUPPORTED_10baseT_Half)) + if (!(bp->supported & + SUPPORTED_10baseT_Half)) { + DP(NETIF_MSG_LINK, + "10M half not supported\n"); return -EINVAL; + } advertising = (ADVERTISED_10baseT_Half | ADVERTISED_TP); @@ -7150,15 +8084,21 @@ static int bnx2x_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) case SPEED_100: if (cmd->duplex == DUPLEX_FULL) { if (!(bp->supported & - SUPPORTED_100baseT_Full)) + SUPPORTED_100baseT_Full)) { + DP(NETIF_MSG_LINK, + "100M full not supported\n"); return -EINVAL; + } advertising = (ADVERTISED_100baseT_Full | ADVERTISED_TP); } else { if (!(bp->supported & - SUPPORTED_100baseT_Half)) + SUPPORTED_100baseT_Half)) { + DP(NETIF_MSG_LINK, + "100M half not supported\n"); return -EINVAL; + } advertising = (ADVERTISED_100baseT_Half | ADVERTISED_TP); @@ -7166,39 +8106,54 @@ static int bnx2x_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) break; case SPEED_1000: - if (cmd->duplex != DUPLEX_FULL) + if (cmd->duplex != DUPLEX_FULL) { + DP(NETIF_MSG_LINK, "1G half not supported\n"); return -EINVAL; + } - if (!(bp->supported & SUPPORTED_1000baseT_Full)) + if (!(bp->supported & SUPPORTED_1000baseT_Full)) { + DP(NETIF_MSG_LINK, "1G full not supported\n"); return -EINVAL; + } advertising = (ADVERTISED_1000baseT_Full | ADVERTISED_TP); break; case SPEED_2500: - if (cmd->duplex != DUPLEX_FULL) + if (cmd->duplex != DUPLEX_FULL) { + DP(NETIF_MSG_LINK, + "2.5G half not supported\n"); return -EINVAL; + } - if (!(bp->supported & SUPPORTED_2500baseT_Full)) + if (!(bp->supported & SUPPORTED_2500baseX_Full)) { + DP(NETIF_MSG_LINK, + "2.5G full not supported\n"); return -EINVAL; + } - advertising = (ADVERTISED_2500baseT_Full | + advertising = (ADVERTISED_2500baseX_Full | ADVERTISED_TP); break; case SPEED_10000: - if (cmd->duplex != DUPLEX_FULL) + if (cmd->duplex != DUPLEX_FULL) { + DP(NETIF_MSG_LINK, "10G half not supported\n"); return -EINVAL; + } - if (!(bp->supported & SUPPORTED_10000baseT_Full)) + if (!(bp->supported & SUPPORTED_10000baseT_Full)) { + DP(NETIF_MSG_LINK, "10G full not supported\n"); return -EINVAL; + } advertising = (ADVERTISED_10000baseT_Full | ADVERTISED_FIBRE); break; default: + DP(NETIF_MSG_LINK, "Unsupported speed\n"); return -EINVAL; } @@ -7398,8 +8353,7 @@ static void bnx2x_disable_nvram_access(struct bnx2x *bp) static int bnx2x_nvram_read_dword(struct bnx2x *bp, u32 offset, u32 *ret_val, u32 cmd_flags) { - int rc; - int count, i; + int count, i, rc; u32 val; /* build the command word */ @@ -7452,13 +8406,13 @@ static int bnx2x_nvram_read(struct bnx2x *bp, u32 offset, u8 *ret_buf, if ((offset & 0x03) || (buf_size & 0x03) || (buf_size == 0)) { DP(NETIF_MSG_NVM, - "Invalid paramter: offset 0x%x buf_size 0x%x\n", + "Invalid parameter: offset 0x%x buf_size 0x%x\n", offset, buf_size); return -EINVAL; } if (offset + buf_size > bp->flash_size) { - DP(NETIF_MSG_NVM, "Invalid paramter: offset (0x%x) +" + DP(NETIF_MSG_NVM, "Invalid parameter: offset (0x%x) +" " buf_size (0x%x) > flash_size (0x%x)\n", offset, buf_size, bp->flash_size); return -EINVAL; @@ -7519,8 +8473,7 @@ static int bnx2x_get_eeprom(struct net_device *dev, static int bnx2x_nvram_write_dword(struct bnx2x *bp, u32 offset, u32 val, u32 cmd_flags) { - int rc; - int count, i; + int count, i, rc; /* build the command word */ cmd_flags |= MCPR_NVM_COMMAND_DOIT | MCPR_NVM_COMMAND_WR; @@ -7557,7 +8510,7 @@ static int bnx2x_nvram_write_dword(struct bnx2x *bp, u32 offset, u32 val, return rc; } -#define BYTE_OFFSET(offset) (8 * (offset & 0x03)) +#define BYTE_OFFSET(offset) (8 * (offset & 0x03)) static int bnx2x_nvram_write1(struct bnx2x *bp, u32 offset, u8 *data_buf, int buf_size) @@ -7568,7 +8521,7 @@ static int bnx2x_nvram_write1(struct bnx2x *bp, u32 offset, u8 *data_buf, u32 val; if (offset + buf_size > bp->flash_size) { - DP(NETIF_MSG_NVM, "Invalid paramter: offset (0x%x) +" + DP(NETIF_MSG_NVM, "Invalid parameter: offset (0x%x) +" " buf_size (0x%x) > flash_size (0x%x)\n", offset, buf_size, bp->flash_size); return -EINVAL; @@ -7621,13 +8574,13 @@ static int bnx2x_nvram_write(struct bnx2x *bp, u32 offset, u8 *data_buf, if ((offset & 0x03) || (buf_size & 0x03) || (buf_size == 0)) { DP(NETIF_MSG_NVM, - "Invalid paramter: offset 0x%x buf_size 0x%x\n", + "Invalid parameter: offset 0x%x buf_size 0x%x\n", offset, buf_size); return -EINVAL; } if (offset + buf_size > bp->flash_size) { - DP(NETIF_MSG_NVM, "Invalid paramter: offset (0x%x) +" + DP(NETIF_MSG_NVM, "Invalid parameter: offset (0x%x) +" " buf_size (0x%x) > flash_size (0x%x)\n", offset, buf_size, bp->flash_size); return -EINVAL; @@ -7788,52 +8741,29 @@ static int bnx2x_set_pauseparam(struct net_device *dev, DP_LEVEL " autoneg %d rx_pause %d tx_pause %d\n", epause->cmd, epause->autoneg, epause->rx_pause, epause->tx_pause); - bp->req_flow_ctrl = FLOW_CTRL_AUTO; if (epause->autoneg) { - bp->req_autoneg |= AUTONEG_FLOW_CTRL; - if (bp->dev->mtu <= 4500) { - bp->pause_mode = PAUSE_BOTH; - bp->advertising |= (ADVERTISED_Pause | - ADVERTISED_Asym_Pause); - } else { - bp->pause_mode = PAUSE_ASYMMETRIC; - bp->advertising |= ADVERTISED_Asym_Pause; + if (!(bp->supported & SUPPORTED_Autoneg)) { + DP(NETIF_MSG_LINK, "Aotoneg not supported\n"); + return -EINVAL; } - } else { + bp->req_autoneg |= AUTONEG_FLOW_CTRL; + } else bp->req_autoneg &= ~AUTONEG_FLOW_CTRL; - if (epause->rx_pause) - bp->req_flow_ctrl |= FLOW_CTRL_RX; - if (epause->tx_pause) - bp->req_flow_ctrl |= FLOW_CTRL_TX; - - switch (bp->req_flow_ctrl) { - case FLOW_CTRL_AUTO: - bp->req_flow_ctrl = FLOW_CTRL_NONE; - bp->pause_mode = PAUSE_NONE; - bp->advertising &= ~(ADVERTISED_Pause | - ADVERTISED_Asym_Pause); - break; + bp->req_flow_ctrl = FLOW_CTRL_AUTO; - case FLOW_CTRL_TX: - bp->pause_mode = PAUSE_ASYMMETRIC; - bp->advertising |= ADVERTISED_Asym_Pause; - break; + if (epause->rx_pause) + bp->req_flow_ctrl |= FLOW_CTRL_RX; + if (epause->tx_pause) + bp->req_flow_ctrl |= FLOW_CTRL_TX; - case FLOW_CTRL_RX: - case FLOW_CTRL_BOTH: - bp->pause_mode = PAUSE_BOTH; - bp->advertising |= (ADVERTISED_Pause | - ADVERTISED_Asym_Pause); - break; - } - } + if (!(bp->req_autoneg & AUTONEG_FLOW_CTRL) && + (bp->req_flow_ctrl == FLOW_CTRL_AUTO)) + bp->req_flow_ctrl = FLOW_CTRL_NONE; - DP(NETIF_MSG_LINK, "req_autoneg 0x%x req_flow_ctrl 0x%x\n" - DP_LEVEL " pause_mode %d advertising 0x%x\n", - bp->req_autoneg, bp->req_flow_ctrl, bp->pause_mode, - bp->advertising); + DP(NETIF_MSG_LINK, "req_autoneg 0x%x req_flow_ctrl 0x%x\n", + bp->req_autoneg, bp->req_flow_ctrl); bnx2x_stop_stats(bp); bnx2x_link_initialize(bp); @@ -7906,81 +8836,87 @@ static void bnx2x_self_test(struct net_device *dev, static struct { char string[ETH_GSTRING_LEN]; } bnx2x_stats_str_arr[BNX2X_NUM_STATS] = { - { "rx_bytes"}, /* 0 */ - { "rx_error_bytes"}, /* 1 */ - { "tx_bytes"}, /* 2 */ - { "tx_error_bytes"}, /* 3 */ - { "rx_ucast_packets"}, /* 4 */ - { "rx_mcast_packets"}, /* 5 */ - { "rx_bcast_packets"}, /* 6 */ - { "tx_ucast_packets"}, /* 7 */ - { "tx_mcast_packets"}, /* 8 */ - { "tx_bcast_packets"}, /* 9 */ - { "tx_mac_errors"}, /* 10 */ - { "tx_carrier_errors"}, /* 11 */ - { "rx_crc_errors"}, /* 12 */ - { "rx_align_errors"}, /* 13 */ - { "tx_single_collisions"}, /* 14 */ - { "tx_multi_collisions"}, /* 15 */ - { "tx_deferred"}, /* 16 */ - { "tx_excess_collisions"}, /* 17 */ - { "tx_late_collisions"}, /* 18 */ - { "tx_total_collisions"}, /* 19 */ - { "rx_fragments"}, /* 20 */ - { "rx_jabbers"}, /* 21 */ - { "rx_undersize_packets"}, /* 22 */ - { "rx_oversize_packets"}, /* 23 */ - { "rx_xon_frames"}, /* 24 */ - { "rx_xoff_frames"}, /* 25 */ - { "tx_xon_frames"}, /* 26 */ - { "tx_xoff_frames"}, /* 27 */ - { "rx_mac_ctrl_frames"}, /* 28 */ - { "rx_filtered_packets"}, /* 29 */ - { "rx_discards"}, /* 30 */ + { "rx_bytes"}, + { "rx_error_bytes"}, + { "tx_bytes"}, + { "tx_error_bytes"}, + { "rx_ucast_packets"}, + { "rx_mcast_packets"}, + { "rx_bcast_packets"}, + { "tx_ucast_packets"}, + { "tx_mcast_packets"}, + { "tx_bcast_packets"}, + { "tx_mac_errors"}, /* 10 */ + { "tx_carrier_errors"}, + { "rx_crc_errors"}, + { "rx_align_errors"}, + { "tx_single_collisions"}, + { "tx_multi_collisions"}, + { "tx_deferred"}, + { "tx_excess_collisions"}, + { "tx_late_collisions"}, + { "tx_total_collisions"}, + { "rx_fragments"}, /* 20 */ + { "rx_jabbers"}, + { "rx_undersize_packets"}, + { "rx_oversize_packets"}, + { "rx_xon_frames"}, + { "rx_xoff_frames"}, + { "tx_xon_frames"}, + { "tx_xoff_frames"}, + { "rx_mac_ctrl_frames"}, + { "rx_filtered_packets"}, + { "rx_discards"}, /* 30 */ + { "brb_discard"}, + { "brb_truncate"}, + { "xxoverflow"} }; #define STATS_OFFSET32(offset_name) \ (offsetof(struct bnx2x_eth_stats, offset_name) / 4) static unsigned long bnx2x_stats_offset_arr[BNX2X_NUM_STATS] = { - STATS_OFFSET32(total_bytes_received_hi), /* 0 */ - STATS_OFFSET32(stat_IfHCInBadOctets_hi), /* 1 */ - STATS_OFFSET32(total_bytes_transmitted_hi), /* 2 */ - STATS_OFFSET32(stat_IfHCOutBadOctets_hi), /* 3 */ - STATS_OFFSET32(total_unicast_packets_received_hi), /* 4 */ - STATS_OFFSET32(total_multicast_packets_received_hi), /* 5 */ - STATS_OFFSET32(total_broadcast_packets_received_hi), /* 6 */ - STATS_OFFSET32(total_unicast_packets_transmitted_hi), /* 7 */ - STATS_OFFSET32(total_multicast_packets_transmitted_hi), /* 8 */ - STATS_OFFSET32(total_broadcast_packets_transmitted_hi), /* 9 */ - STATS_OFFSET32(stat_Dot3statsInternalMacTransmitErrors), /* 10 */ - STATS_OFFSET32(stat_Dot3StatsCarrierSenseErrors), /* 11 */ - STATS_OFFSET32(crc_receive_errors), /* 12 */ - STATS_OFFSET32(alignment_errors), /* 13 */ - STATS_OFFSET32(single_collision_transmit_frames), /* 14 */ - STATS_OFFSET32(multiple_collision_transmit_frames), /* 15 */ - STATS_OFFSET32(stat_Dot3StatsDeferredTransmissions), /* 16 */ - STATS_OFFSET32(excessive_collision_frames), /* 17 */ - STATS_OFFSET32(late_collision_frames), /* 18 */ - STATS_OFFSET32(number_of_bugs_found_in_stats_spec), /* 19 */ - STATS_OFFSET32(runt_packets_received), /* 20 */ - STATS_OFFSET32(jabber_packets_received), /* 21 */ - STATS_OFFSET32(error_runt_packets_received), /* 22 */ - STATS_OFFSET32(error_jabber_packets_received), /* 23 */ - STATS_OFFSET32(pause_xon_frames_received), /* 24 */ - STATS_OFFSET32(pause_xoff_frames_received), /* 25 */ - STATS_OFFSET32(pause_xon_frames_transmitted), /* 26 */ - STATS_OFFSET32(pause_xoff_frames_transmitted), /* 27 */ - STATS_OFFSET32(control_frames_received), /* 28 */ - STATS_OFFSET32(mac_filter_discard), /* 29 */ - STATS_OFFSET32(no_buff_discard), /* 30 */ + STATS_OFFSET32(total_bytes_received_hi), + STATS_OFFSET32(stat_IfHCInBadOctets_hi), + STATS_OFFSET32(total_bytes_transmitted_hi), + STATS_OFFSET32(stat_IfHCOutBadOctets_hi), + STATS_OFFSET32(total_unicast_packets_received_hi), + STATS_OFFSET32(total_multicast_packets_received_hi), + STATS_OFFSET32(total_broadcast_packets_received_hi), + STATS_OFFSET32(total_unicast_packets_transmitted_hi), + STATS_OFFSET32(total_multicast_packets_transmitted_hi), + STATS_OFFSET32(total_broadcast_packets_transmitted_hi), + STATS_OFFSET32(stat_Dot3statsInternalMacTransmitErrors), /* 10 */ + STATS_OFFSET32(stat_Dot3StatsCarrierSenseErrors), + STATS_OFFSET32(crc_receive_errors), + STATS_OFFSET32(alignment_errors), + STATS_OFFSET32(single_collision_transmit_frames), + STATS_OFFSET32(multiple_collision_transmit_frames), + STATS_OFFSET32(stat_Dot3StatsDeferredTransmissions), + STATS_OFFSET32(excessive_collision_frames), + STATS_OFFSET32(late_collision_frames), + STATS_OFFSET32(number_of_bugs_found_in_stats_spec), + STATS_OFFSET32(runt_packets_received), /* 20 */ + STATS_OFFSET32(jabber_packets_received), + STATS_OFFSET32(error_runt_packets_received), + STATS_OFFSET32(error_jabber_packets_received), + STATS_OFFSET32(pause_xon_frames_received), + STATS_OFFSET32(pause_xoff_frames_received), + STATS_OFFSET32(pause_xon_frames_transmitted), + STATS_OFFSET32(pause_xoff_frames_transmitted), + STATS_OFFSET32(control_frames_received), + STATS_OFFSET32(mac_filter_discard), + STATS_OFFSET32(no_buff_discard), /* 30 */ + STATS_OFFSET32(brb_discard), + STATS_OFFSET32(brb_truncate_discard), + STATS_OFFSET32(xxoverflow_discard) }; static u8 bnx2x_stats_len_arr[BNX2X_NUM_STATS] = { 8, 0, 8, 0, 8, 8, 8, 8, 8, 8, 4, 0, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, - 4, + 4, 4, 4, 4 }; static void bnx2x_get_strings(struct net_device *dev, u32 stringset, u8 *buf) @@ -8138,9 +9074,7 @@ static int bnx2x_set_power_state(struct bnx2x *bp, pci_power_t state) * net_device service functions */ -/* Called with rtnl_lock from vlan functions and also netif_tx_lock - * from set_multicast. - */ +/* called with netif_tx_lock from set_multicast */ static void bnx2x_set_rx_mode(struct net_device *dev) { struct bnx2x *bp = netdev_priv(dev); @@ -8314,7 +9248,7 @@ static int bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev) ETH_TX_BD_ETH_ADDR_TYPE_SHIFT); tx_bd->general_data |= 1; /* header nbd */ - /* remeber the first bd of the packet */ + /* remember the first bd of the packet */ tx_buf->first_bd = bd_prod; DP(NETIF_MSG_TX_QUEUED, @@ -8334,7 +9268,7 @@ static int bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev) /* for now NS flag is not used in Linux */ pbd->global_data = (len | - ((skb->protocol == ETH_P_8021Q) << + ((skb->protocol == ntohs(ETH_P_8021Q)) << ETH_TX_PARSE_BD_LLC_SNAP_EN_SHIFT)); pbd->ip_hlen = ip_hdrlen(skb) / 2; pbd->total_hlen = cpu_to_le16(len + pbd->ip_hlen); @@ -8343,7 +9277,7 @@ static int bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev) tx_bd->bd_flags.as_bitfield |= ETH_TX_BD_FLAGS_TCP_CSUM; - pbd->tcp_flags = htonl(tcp_flag_word(skb)) & 0xFFFF; + pbd->tcp_flags = pbd_tcp_flags(skb); pbd->total_hlen += cpu_to_le16(tcp_hdrlen(skb) / 2); pbd->tcp_pseudo_csum = swab16(th->check); @@ -8387,7 +9321,7 @@ static int bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev) if (skb_shinfo(skb)->gso_size && (skb->len > (bp->dev->mtu + ETH_HLEN))) { - int hlen = 2 * le32_to_cpu(pbd->total_hlen); + int hlen = 2 * le16_to_cpu(pbd->total_hlen); DP(NETIF_MSG_TX_QUEUED, "TSO packet len %d hlen %d total len %d tso size %d\n", @@ -8427,7 +9361,7 @@ static int bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev) tx_bd->vlan = cpu_to_le16(pkt_prod); /* this marks the bd * as one that has no individual mapping - * the FW ignors this flag in a bd not maked start + * the FW ignores this flag in a bd not marked start */ tx_bd->bd_flags.as_bitfield = ETH_TX_BD_FLAGS_SW_LSO; DP(NETIF_MSG_TX_QUEUED, @@ -8504,9 +9438,11 @@ static int bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev) DP(NETIF_MSG_TX_QUEUED, "doorbell: nbd %u bd %d\n", nbd, bd_prod); - fp->hw_tx_prods->bds_prod += cpu_to_le16(nbd); + fp->hw_tx_prods->bds_prod = + cpu_to_le16(le16_to_cpu(fp->hw_tx_prods->bds_prod) + nbd); mb(); /* FW restriction: must not reorder writing nbd and packets */ - fp->hw_tx_prods->packets_prod += cpu_to_le32(1); + fp->hw_tx_prods->packets_prod = + cpu_to_le32(le32_to_cpu(fp->hw_tx_prods->packets_prod) + 1); DOORBELL(bp, fp_index, 0); mmiowb(); @@ -8525,11 +9461,6 @@ static int bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev) return NETDEV_TX_OK; } -static struct net_device_stats *bnx2x_get_stats(struct net_device *dev) -{ - return &dev->stats; -} - /* Called with rtnl_lock */ static int bnx2x_open(struct net_device *dev) { @@ -8543,16 +9474,13 @@ static int bnx2x_open(struct net_device *dev) /* Called with rtnl_lock */ static int bnx2x_close(struct net_device *dev) { - int rc; struct bnx2x *bp = netdev_priv(dev); /* Unload the driver, release IRQs */ - rc = bnx2x_nic_unload(bp, 1); - if (rc) { - BNX2X_ERR("bnx2x_nic_unload failed: %d\n", rc); - return rc; - } - bnx2x_set_power_state(bp, PCI_D3hot); + bnx2x_nic_unload(bp, 1); + + if (!CHIP_REV_IS_SLOW(bp)) + bnx2x_set_power_state(bp, PCI_D3hot); return 0; } @@ -8584,7 +9512,7 @@ static int bnx2x_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) case SIOCGMIIPHY: data->phy_id = bp->phy_addr; - /* fallthru */ + /* fallthrough */ case SIOCGMIIREG: { u32 mii_regval; @@ -8633,7 +9561,7 @@ static int bnx2x_change_mtu(struct net_device *dev, int new_mtu) return -EINVAL; /* This does not race with packet allocation - * because the actuall alloc size is + * because the actual alloc size is * only updated as part of load */ dev->mtu = new_mtu; @@ -8666,7 +9594,7 @@ static void bnx2x_vlan_rx_register(struct net_device *dev, bp->vlgrp = vlgrp; if (netif_running(dev)) - bnx2x_set_rx_mode(dev); + bnx2x_set_client_config(bp); } #endif @@ -8695,14 +9623,18 @@ static void bnx2x_reset_task(struct work_struct *work) if (!netif_running(bp->dev)) return; - bp->in_reset_task = 1; + rtnl_lock(); - bnx2x_netif_stop(bp); + if (bp->state != BNX2X_STATE_OPEN) { + DP(NETIF_MSG_TX_ERR, "state is %x, returning\n", bp->state); + goto reset_task_exit; + } bnx2x_nic_unload(bp, 0); bnx2x_nic_load(bp, 0); - bp->in_reset_task = 0; +reset_task_exit: + rtnl_unlock(); } static int __devinit bnx2x_init_board(struct pci_dev *pdev, @@ -8783,8 +9715,6 @@ static int __devinit bnx2x_init_board(struct pci_dev *pdev, spin_lock_init(&bp->phy_lock); - bp->in_reset_task = 0; - INIT_WORK(&bp->reset_task, bnx2x_reset_task); INIT_WORK(&bp->sp_task, bnx2x_sp_task); @@ -8813,7 +9743,7 @@ static int __devinit bnx2x_init_board(struct pci_dev *pdev, bnx2x_get_hwinfo(bp); if (CHIP_REV(bp) == CHIP_REV_FPGA) { - printk(KERN_ERR PFX "FPGA detacted. MCP disabled," + printk(KERN_ERR PFX "FPGA detected. MCP disabled," " will only init first device\n"); onefunc = 1; nomcp = 1; @@ -8882,14 +9812,32 @@ err_out: return rc; } +static int __devinit bnx2x_get_pcie_width(struct bnx2x *bp) +{ + u32 val = REG_RD(bp, PCICFG_OFFSET + PCICFG_LINK_CONTROL); + + val = (val & PCICFG_LINK_WIDTH) >> PCICFG_LINK_WIDTH_SHIFT; + return val; +} + +/* return value of 1=2.5GHz 2=5GHz */ +static int __devinit bnx2x_get_pcie_speed(struct bnx2x *bp) +{ + u32 val = REG_RD(bp, PCICFG_OFFSET + PCICFG_LINK_CONTROL); + + val = (val & PCICFG_LINK_SPEED) >> PCICFG_LINK_SPEED_SHIFT; + return val; +} + static int __devinit bnx2x_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { static int version_printed; struct net_device *dev = NULL; struct bnx2x *bp; - int rc, i; + int rc; int port = PCI_FUNC(pdev->devfn); + DECLARE_MAC_BUF(mac); if (version_printed++ == 0) printk(KERN_INFO "%s", version); @@ -8906,6 +9854,7 @@ static int __devinit bnx2x_init_one(struct pci_dev *pdev, if (port && onefunc) { printk(KERN_ERR PFX "second function disabled. exiting\n"); + free_netdev(dev); return 0; } @@ -8918,7 +9867,6 @@ static int __devinit bnx2x_init_one(struct pci_dev *pdev, dev->hard_start_xmit = bnx2x_start_xmit; dev->watchdog_timeo = TX_TIMEOUT; - dev->get_stats = bnx2x_get_stats; dev->ethtool_ops = &bnx2x_ethtool_ops; dev->open = bnx2x_open; dev->stop = bnx2x_close; @@ -8944,7 +9892,7 @@ static int __devinit bnx2x_init_one(struct pci_dev *pdev, rc = register_netdev(dev); if (rc) { - printk(KERN_ERR PFX "Cannot register net device\n"); + dev_err(&pdev->dev, "Cannot register net device\n"); if (bp->regview) iounmap(bp->regview); if (bp->doorbells) @@ -8959,32 +9907,30 @@ static int __devinit bnx2x_init_one(struct pci_dev *pdev, pci_set_drvdata(pdev, dev); bp->name = board_info[ent->driver_data].name; - printk(KERN_INFO "%s: %s (%c%d) PCI%s %s %dMHz " - "found at mem %lx, IRQ %d, ", - dev->name, bp->name, + printk(KERN_INFO "%s: %s (%c%d) PCI-E x%d %s found at mem %lx," + " IRQ %d, ", dev->name, bp->name, ((CHIP_ID(bp) & 0xf000) >> 12) + 'A', ((CHIP_ID(bp) & 0x0ff0) >> 4), - ((bp->flags & PCIX_FLAG) ? "-X" : ""), - ((bp->flags & PCI_32BIT_FLAG) ? "32-bit" : "64-bit"), - bp->bus_speed_mhz, - dev->base_addr, - bp->pdev->irq); - - printk("node addr "); - for (i = 0; i < 6; i++) - printk("%2.2x", dev->dev_addr[i]); - printk("\n"); - + bnx2x_get_pcie_width(bp), + (bnx2x_get_pcie_speed(bp) == 2) ? "5GHz (Gen2)" : "2.5GHz", + dev->base_addr, bp->pdev->irq); + printk(KERN_CONT "node addr %s\n", print_mac(mac, dev->dev_addr)); return 0; } static void __devexit bnx2x_remove_one(struct pci_dev *pdev) { struct net_device *dev = pci_get_drvdata(pdev); - struct bnx2x *bp = netdev_priv(dev); + struct bnx2x *bp; + + if (!dev) { + /* we get here if init_one() fails */ + printk(KERN_ERR PFX "BAD net device from bnx2x_init_one\n"); + return; + } + + bp = netdev_priv(dev); - flush_scheduled_work(); - /*tasklet_kill(&bp->sp_task);*/ unregister_netdev(dev); if (bp->regview) @@ -9002,34 +9948,43 @@ static void __devexit bnx2x_remove_one(struct pci_dev *pdev) static int bnx2x_suspend(struct pci_dev *pdev, pm_message_t state) { struct net_device *dev = pci_get_drvdata(pdev); - struct bnx2x *bp = netdev_priv(dev); - int rc; + struct bnx2x *bp; + + if (!dev) + return 0; if (!netif_running(dev)) return 0; - rc = bnx2x_nic_unload(bp, 0); - if (!rc) - return rc; + bp = netdev_priv(dev); + + bnx2x_nic_unload(bp, 0); netif_device_detach(dev); - pci_save_state(pdev); + pci_save_state(pdev); bnx2x_set_power_state(bp, pci_choose_state(pdev, state)); + return 0; } static int bnx2x_resume(struct pci_dev *pdev) { struct net_device *dev = pci_get_drvdata(pdev); - struct bnx2x *bp = netdev_priv(dev); + struct bnx2x *bp; int rc; + if (!dev) { + printk(KERN_ERR PFX "BAD net device from bnx2x_init_one\n"); + return -ENODEV; + } + if (!netif_running(dev)) return 0; - pci_restore_state(pdev); + bp = netdev_priv(dev); + pci_restore_state(pdev); bnx2x_set_power_state(bp, PCI_D0); netif_device_attach(dev); diff --git a/drivers/net/bnx2x.h b/drivers/net/bnx2x.h index 4f7ae6f77452..4f0c0d31e7c1 100644 --- a/drivers/net/bnx2x.h +++ b/drivers/net/bnx2x.h @@ -1,6 +1,6 @@ /* bnx2x.h: Broadcom Everest network driver. * - * Copyright (c) 2007 Broadcom Corporation + * Copyright (c) 2007-2008 Broadcom Corporation * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -24,6 +24,8 @@ #define BNX2X_MSG_STATS 0x20000 /* was: NETIF_MSG_TIMER */ #define NETIF_MSG_NVM 0x40000 /* was: NETIF_MSG_HW */ #define NETIF_MSG_DMAE 0x80000 /* was: NETIF_MSG_HW */ +#define BNX2X_MSG_SP 0x100000 /* was: NETIF_MSG_INTR */ +#define BNX2X_MSG_FP 0x200000 /* was: NETIF_MSG_INTR */ #define DP_LEVEL KERN_NOTICE /* was: KERN_DEBUG */ @@ -40,6 +42,12 @@ __LINE__, bp->dev?(bp->dev->name):"?", ##__args); \ } while (0) +/* for logging (never masked) */ +#define BNX2X_LOG(__fmt, __args...) do { \ + printk(KERN_NOTICE "[%s:%d(%s)]" __fmt, __FUNCTION__, \ + __LINE__, bp->dev?(bp->dev->name):"?", ##__args); \ + } while (0) + /* before we have a dev->name use dev_info() */ #define BNX2X_DEV_INFO(__fmt, __args...) do { \ if (bp->msglevel & NETIF_MSG_PROBE) \ @@ -423,8 +431,6 @@ struct bnx2x_fastpath { #define BNX2X_FP_STATE_OPEN 0xa0000 #define BNX2X_FP_STATE_HALTING 0xb0000 #define BNX2X_FP_STATE_HALTED 0xc0000 -#define BNX2X_FP_STATE_DELETED 0xd0000 -#define BNX2X_FP_STATE_CLOSE_IRQ 0xe0000 int index; @@ -505,7 +511,6 @@ struct bnx2x { struct eth_spe *spq; dma_addr_t spq_mapping; u16 spq_prod_idx; - u16 dsb_sp_prod_idx; struct eth_spe *spq_prod_bd; struct eth_spe *spq_last_bd; u16 *dsb_sp_prod; @@ -517,7 +522,7 @@ struct bnx2x { */ u8 stat_pending; - /* End of fileds used in the performance code paths */ + /* End of fields used in the performance code paths */ int panic; int msglevel; @@ -540,8 +545,6 @@ struct bnx2x { spinlock_t phy_lock; struct work_struct reset_task; - u16 in_reset_task; - struct work_struct sp_task; struct timer_list timer; @@ -555,7 +558,6 @@ struct bnx2x { #define CHIP_ID(bp) (((bp)->chip_id) & 0xfffffff0) #define CHIP_NUM(bp) (((bp)->chip_id) & 0xffff0000) -#define CHIP_NUM_5710 0x57100000 #define CHIP_REV(bp) (((bp)->chip_id) & 0x0000f000) #define CHIP_REV_Ax 0x00000000 @@ -574,7 +576,8 @@ struct bnx2x { u32 fw_mb; u32 hw_config; - u32 serdes_config; + u32 board; + u32 serdes_config; u32 lane_config; u32 ext_phy_config; #define XGXS_EXT_PHY_TYPE(bp) (bp->ext_phy_config & \ @@ -595,11 +598,11 @@ struct bnx2x { u8 tx_lane_swap; u8 link_up; + u8 phy_link_up; u32 supported; /* link settings - missing defines */ #define SUPPORTED_2500baseT_Full (1 << 15) -#define SUPPORTED_CX4 (1 << 16) u32 phy_flags; /*#define PHY_SERDES_FLAG 0x1*/ @@ -644,16 +647,9 @@ struct bnx2x { #define FLOW_CTRL_BOTH PORT_FEATURE_FLOW_CONTROL_BOTH #define FLOW_CTRL_NONE PORT_FEATURE_FLOW_CONTROL_NONE - u32 pause_mode; -#define PAUSE_NONE 0 -#define PAUSE_SYMMETRIC 1 -#define PAUSE_ASYMMETRIC 2 -#define PAUSE_BOTH 3 - u32 advertising; /* link settings - missing defines */ #define ADVERTISED_2500baseT_Full (1 << 15) -#define ADVERTISED_CX4 (1 << 16) u32 link_status; u32 line_speed; @@ -667,6 +663,8 @@ struct bnx2x { #define NVRAM_TIMEOUT_COUNT 30000 #define NVRAM_PAGE_SIZE 256 + u8 wol; + int rx_ring_size; u16 tx_quick_cons_trip_int; @@ -718,9 +716,6 @@ struct bnx2x { #endif char *name; - u16 bus_speed_mhz; - u8 wol; - u8 pad; /* used to synchronize stats collecting */ int stats_state; @@ -856,8 +851,8 @@ struct bnx2x { #define MAX_SPQ_PENDING 8 -#define BNX2X_NUM_STATS 31 -#define BNX2X_NUM_TESTS 2 +#define BNX2X_NUM_STATS 34 +#define BNX2X_NUM_TESTS 1 #define DPM_TRIGER_TYPE 0x40 @@ -867,6 +862,15 @@ struct bnx2x { DPM_TRIGER_TYPE); \ } while (0) +/* PCIE link and speed */ +#define PCICFG_LINK_WIDTH 0x1f00000 +#define PCICFG_LINK_WIDTH_SHIFT 20 +#define PCICFG_LINK_SPEED 0xf0000 +#define PCICFG_LINK_SPEED_SHIFT 16 + +#define BMAC_CONTROL_RX_ENABLE 2 + +#define pbd_tcp_flags(skb) (ntohl(tcp_flag_word(tcp_hdr(skb)))>>16 & 0xff) /* stuff added to make the code fit 80Col */ @@ -939,13 +943,13 @@ struct bnx2x { #define LINK_16GTFD LINK_STATUS_SPEED_AND_DUPLEX_16GTFD #define LINK_16GXFD LINK_STATUS_SPEED_AND_DUPLEX_16GXFD -#define NIG_STATUS_INTERRUPT_XGXS0_LINK10G \ +#define NIG_STATUS_XGXS0_LINK10G \ NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK10G -#define NIG_XGXS0_LINK_STATUS \ +#define NIG_STATUS_XGXS0_LINK_STATUS \ NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK_STATUS -#define NIG_XGXS0_LINK_STATUS_SIZE \ +#define NIG_STATUS_XGXS0_LINK_STATUS_SIZE \ NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK_STATUS_SIZE -#define NIG_SERDES0_LINK_STATUS \ +#define NIG_STATUS_SERDES0_LINK_STATUS \ NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_SERDES0_LINK_STATUS #define NIG_MASK_MI_INT \ NIG_MASK_INTERRUPT_PORT0_REG_MASK_EMAC0_MISC_MI_INT diff --git a/drivers/net/bnx2x_fw_defs.h b/drivers/net/bnx2x_fw_defs.h index 62a6eb81025a..3b968904ca65 100644 --- a/drivers/net/bnx2x_fw_defs.h +++ b/drivers/net/bnx2x_fw_defs.h @@ -1,6 +1,6 @@ /* bnx2x_fw_defs.h: Broadcom Everest network driver. * - * Copyright (c) 2007 Broadcom Corporation + * Copyright (c) 2007-2008 Broadcom Corporation * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/drivers/net/bnx2x_hsi.h b/drivers/net/bnx2x_hsi.h index 6fd959c34d1f..b21075ccb52e 100644 --- a/drivers/net/bnx2x_hsi.h +++ b/drivers/net/bnx2x_hsi.h @@ -1,6 +1,6 @@ /* bnx2x_hsi.h: Broadcom Everest network driver. * - * Copyright (c) 2007 Broadcom Corporation + * Copyright (c) 2007-2008 Broadcom Corporation * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -8,169 +8,9 @@ */ -#define FUNC_0 0 -#define FUNC_1 1 -#define FUNC_MAX 2 - - -/* This value (in milliseconds) determines the frequency of the driver - * issuing the PULSE message code. The firmware monitors this periodic - * pulse to determine when to switch to an OS-absent mode. */ -#define DRV_PULSE_PERIOD_MS 250 - -/* This value (in milliseconds) determines how long the driver should - * wait for an acknowledgement from the firmware before timing out. Once - * the firmware has timed out, the driver will assume there is no firmware - * running and there won't be any firmware-driver synchronization during a - * driver reset. */ -#define FW_ACK_TIME_OUT_MS 5000 - -#define FW_ACK_POLL_TIME_MS 1 - -#define FW_ACK_NUM_OF_POLL (FW_ACK_TIME_OUT_MS/FW_ACK_POLL_TIME_MS) - -/* LED Blink rate that will achieve ~15.9Hz */ -#define LED_BLINK_RATE_VAL 480 - -/**************************************************************************** - * Driver <-> FW Mailbox * - ****************************************************************************/ -struct drv_fw_mb { - u32 drv_mb_header; -#define DRV_MSG_CODE_MASK 0xffff0000 -#define DRV_MSG_CODE_LOAD_REQ 0x10000000 -#define DRV_MSG_CODE_LOAD_DONE 0x11000000 -#define DRV_MSG_CODE_UNLOAD_REQ_WOL_EN 0x20000000 -#define DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS 0x20010000 -#define DRV_MSG_CODE_UNLOAD_REQ_WOL_MCP 0x20020000 -#define DRV_MSG_CODE_UNLOAD_DONE 0x21000000 -#define DRV_MSG_CODE_DIAG_ENTER_REQ 0x50000000 -#define DRV_MSG_CODE_DIAG_EXIT_REQ 0x60000000 -#define DRV_MSG_CODE_VALIDATE_KEY 0x70000000 -#define DRV_MSG_CODE_GET_CURR_KEY 0x80000000 -#define DRV_MSG_CODE_GET_UPGRADE_KEY 0x81000000 -#define DRV_MSG_CODE_GET_MANUF_KEY 0x82000000 -#define DRV_MSG_CODE_LOAD_L2B_PRAM 0x90000000 - -#define DRV_MSG_SEQ_NUMBER_MASK 0x0000ffff - - u32 drv_mb_param; - - u32 fw_mb_header; -#define FW_MSG_CODE_MASK 0xffff0000 -#define FW_MSG_CODE_DRV_LOAD_COMMON 0x11000000 -#define FW_MSG_CODE_DRV_LOAD_PORT 0x12000000 -#define FW_MSG_CODE_DRV_LOAD_REFUSED 0x13000000 -#define FW_MSG_CODE_DRV_LOAD_DONE 0x14000000 -#define FW_MSG_CODE_DRV_UNLOAD_COMMON 0x21000000 -#define FW_MSG_CODE_DRV_UNLOAD_PORT 0x22000000 -#define FW_MSG_CODE_DRV_UNLOAD_DONE 0x23000000 -#define FW_MSG_CODE_DIAG_ENTER_DONE 0x50000000 -#define FW_MSG_CODE_DIAG_REFUSE 0x51000000 -#define FW_MSG_CODE_VALIDATE_KEY_SUCCESS 0x70000000 -#define FW_MSG_CODE_VALIDATE_KEY_FAILURE 0x71000000 -#define FW_MSG_CODE_GET_KEY_DONE 0x80000000 -#define FW_MSG_CODE_NO_KEY 0x8f000000 -#define FW_MSG_CODE_LIC_INFO_NOT_READY 0x8f800000 -#define FW_MSG_CODE_L2B_PRAM_LOADED 0x90000000 -#define FW_MSG_CODE_L2B_PRAM_T_LOAD_FAILURE 0x91000000 -#define FW_MSG_CODE_L2B_PRAM_C_LOAD_FAILURE 0x92000000 -#define FW_MSG_CODE_L2B_PRAM_X_LOAD_FAILURE 0x93000000 -#define FW_MSG_CODE_L2B_PRAM_U_LOAD_FAILURE 0x94000000 - -#define FW_MSG_SEQ_NUMBER_MASK 0x0000ffff - - u32 fw_mb_param; - - u32 link_status; - /* Driver should update this field on any link change event */ - -#define LINK_STATUS_LINK_FLAG_MASK 0x00000001 -#define LINK_STATUS_LINK_UP 0x00000001 -#define LINK_STATUS_SPEED_AND_DUPLEX_MASK 0x0000001E -#define LINK_STATUS_SPEED_AND_DUPLEX_AN_NOT_COMPLETE (0<<1) -#define LINK_STATUS_SPEED_AND_DUPLEX_10THD (1<<1) -#define LINK_STATUS_SPEED_AND_DUPLEX_10TFD (2<<1) -#define LINK_STATUS_SPEED_AND_DUPLEX_100TXHD (3<<1) -#define LINK_STATUS_SPEED_AND_DUPLEX_100T4 (4<<1) -#define LINK_STATUS_SPEED_AND_DUPLEX_100TXFD (5<<1) -#define LINK_STATUS_SPEED_AND_DUPLEX_1000THD (6<<1) -#define LINK_STATUS_SPEED_AND_DUPLEX_1000TFD (7<<1) -#define LINK_STATUS_SPEED_AND_DUPLEX_1000XFD (7<<1) -#define LINK_STATUS_SPEED_AND_DUPLEX_2500THD (8<<1) -#define LINK_STATUS_SPEED_AND_DUPLEX_2500TFD (9<<1) -#define LINK_STATUS_SPEED_AND_DUPLEX_2500XFD (9<<1) -#define LINK_STATUS_SPEED_AND_DUPLEX_10GTFD (10<<1) -#define LINK_STATUS_SPEED_AND_DUPLEX_10GXFD (10<<1) -#define LINK_STATUS_SPEED_AND_DUPLEX_12GTFD (11<<1) -#define LINK_STATUS_SPEED_AND_DUPLEX_12GXFD (11<<1) -#define LINK_STATUS_SPEED_AND_DUPLEX_12_5GTFD (12<<1) -#define LINK_STATUS_SPEED_AND_DUPLEX_12_5GXFD (12<<1) -#define LINK_STATUS_SPEED_AND_DUPLEX_13GTFD (13<<1) -#define LINK_STATUS_SPEED_AND_DUPLEX_13GXFD (13<<1) -#define LINK_STATUS_SPEED_AND_DUPLEX_15GTFD (14<<1) -#define LINK_STATUS_SPEED_AND_DUPLEX_15GXFD (14<<1) -#define LINK_STATUS_SPEED_AND_DUPLEX_16GTFD (15<<1) -#define LINK_STATUS_SPEED_AND_DUPLEX_16GXFD (15<<1) - -#define LINK_STATUS_AUTO_NEGOTIATE_FLAG_MASK 0x00000020 -#define LINK_STATUS_AUTO_NEGOTIATE_ENABLED 0x00000020 - -#define LINK_STATUS_AUTO_NEGOTIATE_COMPLETE 0x00000040 -#define LINK_STATUS_PARALLEL_DETECTION_FLAG_MASK 0x00000080 -#define LINK_STATUS_PARALLEL_DETECTION_USED 0x00000080 - -#define LINK_STATUS_LINK_PARTNER_1000TFD_CAPABLE 0x00000200 -#define LINK_STATUS_LINK_PARTNER_1000THD_CAPABLE 0x00000400 -#define LINK_STATUS_LINK_PARTNER_100T4_CAPABLE 0x00000800 -#define LINK_STATUS_LINK_PARTNER_100TXFD_CAPABLE 0x00001000 -#define LINK_STATUS_LINK_PARTNER_100TXHD_CAPABLE 0x00002000 -#define LINK_STATUS_LINK_PARTNER_10TFD_CAPABLE 0x00004000 -#define LINK_STATUS_LINK_PARTNER_10THD_CAPABLE 0x00008000 - -#define LINK_STATUS_TX_FLOW_CONTROL_FLAG_MASK 0x00010000 -#define LINK_STATUS_TX_FLOW_CONTROL_ENABLED 0x00010000 - -#define LINK_STATUS_RX_FLOW_CONTROL_FLAG_MASK 0x00020000 -#define LINK_STATUS_RX_FLOW_CONTROL_ENABLED 0x00020000 - -#define LINK_STATUS_LINK_PARTNER_FLOW_CONTROL_MASK 0x000C0000 -#define LINK_STATUS_LINK_PARTNER_NOT_PAUSE_CAPABLE (0<<18) -#define LINK_STATUS_LINK_PARTNER_SYMMETRIC_PAUSE (1<<18) -#define LINK_STATUS_LINK_PARTNER_ASYMMETRIC_PAUSE (2<<18) -#define LINK_STATUS_LINK_PARTNER_BOTH_PAUSE (3<<18) - -#define LINK_STATUS_SERDES_LINK 0x00100000 - -#define LINK_STATUS_LINK_PARTNER_2500XFD_CAPABLE 0x00200000 -#define LINK_STATUS_LINK_PARTNER_2500XHD_CAPABLE 0x00400000 -#define LINK_STATUS_LINK_PARTNER_10GXFD_CAPABLE 0x00800000 -#define LINK_STATUS_LINK_PARTNER_12GXFD_CAPABLE 0x01000000 -#define LINK_STATUS_LINK_PARTNER_12_5GXFD_CAPABLE 0x02000000 -#define LINK_STATUS_LINK_PARTNER_13GXFD_CAPABLE 0x04000000 -#define LINK_STATUS_LINK_PARTNER_15GXFD_CAPABLE 0x08000000 -#define LINK_STATUS_LINK_PARTNER_16GXFD_CAPABLE 0x10000000 - - u32 drv_pulse_mb; -#define DRV_PULSE_SEQ_MASK 0x00007fff -#define DRV_PULSE_SYSTEM_TIME_MASK 0xffff0000 - /* The system time is in the format of - * (year-2001)*12*32 + month*32 + day. */ -#define DRV_PULSE_ALWAYS_ALIVE 0x00008000 - /* Indicate to the firmware not to go into the - * OS-absent when it is not getting driver pulse. - * This is used for debugging as well for PXE(MBA). */ - - u32 mcp_pulse_mb; -#define MCP_PULSE_SEQ_MASK 0x00007fff -#define MCP_PULSE_ALWAYS_ALIVE 0x00008000 - /* Indicates to the driver not to assert due to lack - * of MCP response */ -#define MCP_EVENT_MASK 0xffff0000 -#define MCP_EVENT_OTHER_DRIVER_RESET_REQ 0x00010000 - -}; - +#define PORT_0 0 +#define PORT_1 1 +#define PORT_MAX 2 /**************************************************************************** * Shared HW configuration * @@ -249,7 +89,7 @@ struct shared_hw_cfg { /* NVRAM Offset */ #define SHARED_HW_CFG_SMBUS_TIMING_100KHZ 0x00000000 #define SHARED_HW_CFG_SMBUS_TIMING_400KHZ 0x00001000 -#define SHARED_HW_CFG_HIDE_FUNC1 0x00002000 +#define SHARED_HW_CFG_HIDE_PORT1 0x00002000 u32 power_dissipated; /* 0x11c */ #define SHARED_HW_CFG_POWER_DIS_CMN_MASK 0xff000000 @@ -290,6 +130,8 @@ struct shared_hw_cfg { /* NVRAM Offset */ #define SHARED_HW_CFG_BOARD_TYPE_BCM957710T1015G 0x00000006 #define SHARED_HW_CFG_BOARD_TYPE_BCM957710A1020G 0x00000007 #define SHARED_HW_CFG_BOARD_TYPE_BCM957710T1003G 0x00000008 +#define SHARED_HW_CFG_BOARD_TYPE_BCM957710A1022G 0x00000009 +#define SHARED_HW_CFG_BOARD_TYPE_BCM957710A1021G 0x0000000a #define SHARED_HW_CFG_BOARD_VER_MASK 0xffff0000 #define SHARED_HW_CFG_BOARD_VER_SHIFT 16 @@ -304,13 +146,12 @@ struct shared_hw_cfg { /* NVRAM Offset */ }; + /**************************************************************************** * Port HW configuration * ****************************************************************************/ -struct port_hw_cfg { /* function 0: 0x12c-0x2bb, function 1: 0x2bc-0x44b */ +struct port_hw_cfg { /* port 0: 0x12c port 1: 0x2bc */ - /* Fields below are port specific (in anticipation of dual port - devices */ u32 pci_id; #define PORT_HW_CFG_PCI_VENDOR_ID_MASK 0xffff0000 #define PORT_HW_CFG_PCI_DEVICE_ID_MASK 0x0000ffff @@ -420,6 +261,8 @@ struct port_hw_cfg { /* function 0: 0x12c-0x2bb, function 1: 0x2bc-0x44b */ #define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706 0x00000500 #define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8276 0x00000600 #define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481 0x00000700 +#define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101 0x00000800 +#define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE 0x0000fd00 #define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN 0x0000ff00 #define PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK 0x000000ff @@ -462,11 +305,13 @@ struct port_hw_cfg { /* function 0: 0x12c-0x2bb, function 1: 0x2bc-0x44b */ }; + /**************************************************************************** * Shared Feature configuration * ****************************************************************************/ struct shared_feat_cfg { /* NVRAM Offset */ - u32 bmc_common; /* 0x450 */ + + u32 config; /* 0x450 */ #define SHARED_FEATURE_BMC_ECHO_MODE_EN 0x00000001 }; @@ -475,7 +320,8 @@ struct shared_feat_cfg { /* NVRAM Offset */ /**************************************************************************** * Port Feature configuration * ****************************************************************************/ -struct port_feat_cfg { /* function 0: 0x454-0x4c7, function 1: 0x4c8-0x53b */ +struct port_feat_cfg { /* port 0: 0x454 port 1: 0x4c8 */ + u32 config; #define PORT_FEATURE_BAR1_SIZE_MASK 0x0000000f #define PORT_FEATURE_BAR1_SIZE_SHIFT 0 @@ -609,8 +455,7 @@ struct port_feat_cfg { /* function 0: 0x454-0x4c7, function 1: 0x4c8-0x53b */ #define PORT_FEATURE_SMBUS_ADDR_MASK 0x000000fe #define PORT_FEATURE_SMBUS_ADDR_SHIFT 1 - u32 iscsib_boot_cfg; -#define PORT_FEATURE_ISCSIB_SKIP_TARGET_BOOT 0x00000001 + u32 reserved1; u32 link_config; /* Used as HW defaults for the driver */ #define PORT_FEATURE_CONNECTED_SWITCH_MASK 0x03000000 @@ -657,20 +502,201 @@ struct port_feat_cfg { /* function 0: 0x454-0x4c7, function 1: 0x4c8-0x53b */ }; +/***************************************************************************** + * Device Information * + *****************************************************************************/ +struct dev_info { /* size */ + + u32 bc_rev; /* 8 bits each: major, minor, build */ /* 4 */ + + struct shared_hw_cfg shared_hw_config; /* 40 */ + + struct port_hw_cfg port_hw_config[PORT_MAX]; /* 400*2=800 */ + + struct shared_feat_cfg shared_feature_config; /* 4 */ + + struct port_feat_cfg port_feature_config[PORT_MAX]; /* 116*2=232 */ + +}; + + +#define FUNC_0 0 +#define FUNC_1 1 +#define E1_FUNC_MAX 2 +#define FUNC_MAX E1_FUNC_MAX + + +/* This value (in milliseconds) determines the frequency of the driver + * issuing the PULSE message code. The firmware monitors this periodic + * pulse to determine when to switch to an OS-absent mode. */ +#define DRV_PULSE_PERIOD_MS 250 + +/* This value (in milliseconds) determines how long the driver should + * wait for an acknowledgement from the firmware before timing out. Once + * the firmware has timed out, the driver will assume there is no firmware + * running and there won't be any firmware-driver synchronization during a + * driver reset. */ +#define FW_ACK_TIME_OUT_MS 5000 + +#define FW_ACK_POLL_TIME_MS 1 + +#define FW_ACK_NUM_OF_POLL (FW_ACK_TIME_OUT_MS/FW_ACK_POLL_TIME_MS) + +/* LED Blink rate that will achieve ~15.9Hz */ +#define LED_BLINK_RATE_VAL 480 + /**************************************************************************** - * Device Information * + * Driver <-> FW Mailbox * ****************************************************************************/ -struct dev_info { /* size */ +struct drv_port_mb { + + u32 link_status; + /* Driver should update this field on any link change event */ + +#define LINK_STATUS_LINK_FLAG_MASK 0x00000001 +#define LINK_STATUS_LINK_UP 0x00000001 +#define LINK_STATUS_SPEED_AND_DUPLEX_MASK 0x0000001E +#define LINK_STATUS_SPEED_AND_DUPLEX_AN_NOT_COMPLETE (0<<1) +#define LINK_STATUS_SPEED_AND_DUPLEX_10THD (1<<1) +#define LINK_STATUS_SPEED_AND_DUPLEX_10TFD (2<<1) +#define LINK_STATUS_SPEED_AND_DUPLEX_100TXHD (3<<1) +#define LINK_STATUS_SPEED_AND_DUPLEX_100T4 (4<<1) +#define LINK_STATUS_SPEED_AND_DUPLEX_100TXFD (5<<1) +#define LINK_STATUS_SPEED_AND_DUPLEX_1000THD (6<<1) +#define LINK_STATUS_SPEED_AND_DUPLEX_1000TFD (7<<1) +#define LINK_STATUS_SPEED_AND_DUPLEX_1000XFD (7<<1) +#define LINK_STATUS_SPEED_AND_DUPLEX_2500THD (8<<1) +#define LINK_STATUS_SPEED_AND_DUPLEX_2500TFD (9<<1) +#define LINK_STATUS_SPEED_AND_DUPLEX_2500XFD (9<<1) +#define LINK_STATUS_SPEED_AND_DUPLEX_10GTFD (10<<1) +#define LINK_STATUS_SPEED_AND_DUPLEX_10GXFD (10<<1) +#define LINK_STATUS_SPEED_AND_DUPLEX_12GTFD (11<<1) +#define LINK_STATUS_SPEED_AND_DUPLEX_12GXFD (11<<1) +#define LINK_STATUS_SPEED_AND_DUPLEX_12_5GTFD (12<<1) +#define LINK_STATUS_SPEED_AND_DUPLEX_12_5GXFD (12<<1) +#define LINK_STATUS_SPEED_AND_DUPLEX_13GTFD (13<<1) +#define LINK_STATUS_SPEED_AND_DUPLEX_13GXFD (13<<1) +#define LINK_STATUS_SPEED_AND_DUPLEX_15GTFD (14<<1) +#define LINK_STATUS_SPEED_AND_DUPLEX_15GXFD (14<<1) +#define LINK_STATUS_SPEED_AND_DUPLEX_16GTFD (15<<1) +#define LINK_STATUS_SPEED_AND_DUPLEX_16GXFD (15<<1) + +#define LINK_STATUS_AUTO_NEGOTIATE_FLAG_MASK 0x00000020 +#define LINK_STATUS_AUTO_NEGOTIATE_ENABLED 0x00000020 + +#define LINK_STATUS_AUTO_NEGOTIATE_COMPLETE 0x00000040 +#define LINK_STATUS_PARALLEL_DETECTION_FLAG_MASK 0x00000080 +#define LINK_STATUS_PARALLEL_DETECTION_USED 0x00000080 + +#define LINK_STATUS_LINK_PARTNER_1000TFD_CAPABLE 0x00000200 +#define LINK_STATUS_LINK_PARTNER_1000THD_CAPABLE 0x00000400 +#define LINK_STATUS_LINK_PARTNER_100T4_CAPABLE 0x00000800 +#define LINK_STATUS_LINK_PARTNER_100TXFD_CAPABLE 0x00001000 +#define LINK_STATUS_LINK_PARTNER_100TXHD_CAPABLE 0x00002000 +#define LINK_STATUS_LINK_PARTNER_10TFD_CAPABLE 0x00004000 +#define LINK_STATUS_LINK_PARTNER_10THD_CAPABLE 0x00008000 + +#define LINK_STATUS_TX_FLOW_CONTROL_FLAG_MASK 0x00010000 +#define LINK_STATUS_TX_FLOW_CONTROL_ENABLED 0x00010000 + +#define LINK_STATUS_RX_FLOW_CONTROL_FLAG_MASK 0x00020000 +#define LINK_STATUS_RX_FLOW_CONTROL_ENABLED 0x00020000 + +#define LINK_STATUS_LINK_PARTNER_FLOW_CONTROL_MASK 0x000C0000 +#define LINK_STATUS_LINK_PARTNER_NOT_PAUSE_CAPABLE (0<<18) +#define LINK_STATUS_LINK_PARTNER_SYMMETRIC_PAUSE (1<<18) +#define LINK_STATUS_LINK_PARTNER_ASYMMETRIC_PAUSE (2<<18) +#define LINK_STATUS_LINK_PARTNER_BOTH_PAUSE (3<<18) + +#define LINK_STATUS_SERDES_LINK 0x00100000 + +#define LINK_STATUS_LINK_PARTNER_2500XFD_CAPABLE 0x00200000 +#define LINK_STATUS_LINK_PARTNER_2500XHD_CAPABLE 0x00400000 +#define LINK_STATUS_LINK_PARTNER_10GXFD_CAPABLE 0x00800000 +#define LINK_STATUS_LINK_PARTNER_12GXFD_CAPABLE 0x01000000 +#define LINK_STATUS_LINK_PARTNER_12_5GXFD_CAPABLE 0x02000000 +#define LINK_STATUS_LINK_PARTNER_13GXFD_CAPABLE 0x04000000 +#define LINK_STATUS_LINK_PARTNER_15GXFD_CAPABLE 0x08000000 +#define LINK_STATUS_LINK_PARTNER_16GXFD_CAPABLE 0x10000000 - u32 bc_rev; /* 8 bits each: major, minor, build */ /* 4 */ + u32 reserved[3]; - struct shared_hw_cfg shared_hw_config; /* 40 */ +}; + + +struct drv_func_mb { + + u32 drv_mb_header; +#define DRV_MSG_CODE_MASK 0xffff0000 +#define DRV_MSG_CODE_LOAD_REQ 0x10000000 +#define DRV_MSG_CODE_LOAD_DONE 0x11000000 +#define DRV_MSG_CODE_UNLOAD_REQ_WOL_EN 0x20000000 +#define DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS 0x20010000 +#define DRV_MSG_CODE_UNLOAD_REQ_WOL_MCP 0x20020000 +#define DRV_MSG_CODE_UNLOAD_DONE 0x21000000 +#define DRV_MSG_CODE_DIAG_ENTER_REQ 0x50000000 +#define DRV_MSG_CODE_DIAG_EXIT_REQ 0x60000000 +#define DRV_MSG_CODE_VALIDATE_KEY 0x70000000 +#define DRV_MSG_CODE_GET_CURR_KEY 0x80000000 +#define DRV_MSG_CODE_GET_UPGRADE_KEY 0x81000000 +#define DRV_MSG_CODE_GET_MANUF_KEY 0x82000000 +#define DRV_MSG_CODE_LOAD_L2B_PRAM 0x90000000 + +#define DRV_MSG_SEQ_NUMBER_MASK 0x0000ffff + + u32 drv_mb_param; + + u32 fw_mb_header; +#define FW_MSG_CODE_MASK 0xffff0000 +#define FW_MSG_CODE_DRV_LOAD_COMMON 0x10100000 +#define FW_MSG_CODE_DRV_LOAD_PORT 0x10110000 +#define FW_MSG_CODE_DRV_LOAD_FUNCTION 0x10120000 +#define FW_MSG_CODE_DRV_LOAD_REFUSED 0x10200000 +#define FW_MSG_CODE_DRV_LOAD_DONE 0x11100000 +#define FW_MSG_CODE_DRV_UNLOAD_COMMON 0x20100000 +#define FW_MSG_CODE_DRV_UNLOAD_PORT 0x20110000 +#define FW_MSG_CODE_DRV_UNLOAD_FUNCTION 0x20120000 +#define FW_MSG_CODE_DRV_UNLOAD_DONE 0x21100000 +#define FW_MSG_CODE_DIAG_ENTER_DONE 0x50100000 +#define FW_MSG_CODE_DIAG_REFUSE 0x50200000 +#define FW_MSG_CODE_DIAG_EXIT_DONE 0x60100000 +#define FW_MSG_CODE_VALIDATE_KEY_SUCCESS 0x70100000 +#define FW_MSG_CODE_VALIDATE_KEY_FAILURE 0x70200000 +#define FW_MSG_CODE_GET_KEY_DONE 0x80100000 +#define FW_MSG_CODE_NO_KEY 0x80f00000 +#define FW_MSG_CODE_LIC_INFO_NOT_READY 0x80f80000 +#define FW_MSG_CODE_L2B_PRAM_LOADED 0x90100000 +#define FW_MSG_CODE_L2B_PRAM_T_LOAD_FAILURE 0x90210000 +#define FW_MSG_CODE_L2B_PRAM_C_LOAD_FAILURE 0x90220000 +#define FW_MSG_CODE_L2B_PRAM_X_LOAD_FAILURE 0x90230000 +#define FW_MSG_CODE_L2B_PRAM_U_LOAD_FAILURE 0x90240000 + +#define FW_MSG_SEQ_NUMBER_MASK 0x0000ffff + + u32 fw_mb_param; + + u32 drv_pulse_mb; +#define DRV_PULSE_SEQ_MASK 0x00007fff +#define DRV_PULSE_SYSTEM_TIME_MASK 0xffff0000 + /* The system time is in the format of + * (year-2001)*12*32 + month*32 + day. */ +#define DRV_PULSE_ALWAYS_ALIVE 0x00008000 + /* Indicate to the firmware not to go into the + * OS-absent when it is not getting driver pulse. + * This is used for debugging as well for PXE(MBA). */ - struct port_hw_cfg port_hw_config[FUNC_MAX]; /* 400*2=800 */ + u32 mcp_pulse_mb; +#define MCP_PULSE_SEQ_MASK 0x00007fff +#define MCP_PULSE_ALWAYS_ALIVE 0x00008000 + /* Indicates to the driver not to assert due to lack + * of MCP response */ +#define MCP_EVENT_MASK 0xffff0000 +#define MCP_EVENT_OTHER_DRIVER_RESET_REQ 0x00010000 - struct shared_feat_cfg shared_feature_config; /* 4 */ + u32 iscsi_boot_signature; + u32 iscsi_boot_block_offset; - struct port_feat_cfg port_feature_config[FUNC_MAX];/* 116*2=232 */ + u32 reserved[3]; }; @@ -678,9 +704,8 @@ struct dev_info { /* size */ /**************************************************************************** * Management firmware state * ****************************************************************************/ -/* Allocate 320 bytes for management firmware: still not known exactly - * how much IMD needs. */ -#define MGMTFW_STATE_WORD_SIZE 80 +/* Allocate 440 bytes for management firmware */ +#define MGMTFW_STATE_WORD_SIZE 110 struct mgmtfw_state { u32 opaque[MGMTFW_STATE_WORD_SIZE]; @@ -691,31 +716,40 @@ struct mgmtfw_state { * Shared Memory Region * ****************************************************************************/ struct shmem_region { /* SharedMem Offset (size) */ - u32 validity_map[FUNC_MAX]; /* 0x0 (4 * 2 = 0x8) */ -#define SHR_MEM_VALIDITY_PCI_CFG 0x00000001 -#define SHR_MEM_VALIDITY_MB 0x00000002 -#define SHR_MEM_VALIDITY_DEV_INFO 0x00000004 + + u32 validity_map[PORT_MAX]; /* 0x0 (4*2 = 0x8) */ +#define SHR_MEM_FORMAT_REV_ID ('A'<<24) +#define SHR_MEM_FORMAT_REV_MASK 0xff000000 + /* validity bits */ +#define SHR_MEM_VALIDITY_PCI_CFG 0x00100000 +#define SHR_MEM_VALIDITY_MB 0x00200000 +#define SHR_MEM_VALIDITY_DEV_INFO 0x00400000 +#define SHR_MEM_VALIDITY_RESERVED 0x00000007 /* One licensing bit should be set */ #define SHR_MEM_VALIDITY_LIC_KEY_IN_EFFECT_MASK 0x00000038 #define SHR_MEM_VALIDITY_LIC_MANUF_KEY_IN_EFFECT 0x00000008 #define SHR_MEM_VALIDITY_LIC_UPGRADE_KEY_IN_EFFECT 0x00000010 #define SHR_MEM_VALIDITY_LIC_NO_KEY_IN_EFFECT 0x00000020 + /* Active MFW */ +#define SHR_MEM_VALIDITY_ACTIVE_MFW_UNKNOWN 0x00000000 +#define SHR_MEM_VALIDITY_ACTIVE_MFW_IPMI 0x00000040 +#define SHR_MEM_VALIDITY_ACTIVE_MFW_UMP 0x00000080 +#define SHR_MEM_VALIDITY_ACTIVE_MFW_NCSI 0x000000c0 +#define SHR_MEM_VALIDITY_ACTIVE_MFW_NONE 0x000001c0 +#define SHR_MEM_VALIDITY_ACTIVE_MFW_MASK 0x000001c0 - struct drv_fw_mb drv_fw_mb[FUNC_MAX]; /* 0x8 (28 * 2 = 0x38) */ - - struct dev_info dev_info; /* 0x40 (0x438) */ + struct dev_info dev_info; /* 0x8 (0x438) */ -#ifdef _LICENSE_H - license_key_t drv_lic_key[FUNC_MAX]; /* 0x478 (52 * 2 = 0x68) */ -#else /* Linux! */ - u8 reserved[52*FUNC_MAX]; -#endif + u8 reserved[52*PORT_MAX]; /* FW information (for internal FW use) */ - u32 fw_info_fio_offset; /* 0x4e0 (0x4) */ - struct mgmtfw_state mgmtfw_state; /* 0x4e4 (0x140) */ + u32 fw_info_fio_offset; /* 0x4a8 (0x4) */ + struct mgmtfw_state mgmtfw_state; /* 0x4ac (0x1b8) */ + + struct drv_port_mb port_mb[PORT_MAX]; /* 0x664 (16*2=0x20) */ + struct drv_func_mb func_mb[FUNC_MAX]; /* 0x684 (44*2=0x58) */ -}; /* 0x624 */ +}; /* 0x6dc */ #define BCM_5710_FW_MAJOR_VERSION 4 diff --git a/drivers/net/bnx2x_init.h b/drivers/net/bnx2x_init.h index 04f93bff2ef4..dcaecc53bdb1 100644 --- a/drivers/net/bnx2x_init.h +++ b/drivers/net/bnx2x_init.h @@ -1,6 +1,6 @@ /* bnx2x_init.h: Broadcom Everest network driver. * - * Copyright (c) 2007 Broadcom Corporation + * Copyright (c) 2007-2008 Broadcom Corporation * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -409,7 +409,7 @@ static void bnx2x_init_pxp(struct bnx2x *bp) pci_read_config_word(bp->pdev, bp->pcie_cap + PCI_EXP_DEVCTL, (u16 *)&val); - DP(NETIF_MSG_HW, "read 0x%x from devctl\n", val); + DP(NETIF_MSG_HW, "read 0x%x from devctl\n", (u16)val); w_order = ((val & PCI_EXP_DEVCTL_PAYLOAD) >> 5); r_order = ((val & PCI_EXP_DEVCTL_READRQ) >> 12); @@ -472,10 +472,14 @@ static void bnx2x_init_pxp(struct bnx2x *bp) REG_WR(bp, PXP2_REG_PSWRQ_BW_WR, val); REG_WR(bp, PXP2_REG_RQ_WR_MBS0, w_order); - REG_WR(bp, PXP2_REG_RQ_WR_MBS0 + 8, w_order); + REG_WR(bp, PXP2_REG_RQ_WR_MBS1, w_order); REG_WR(bp, PXP2_REG_RQ_RD_MBS0, r_order); - REG_WR(bp, PXP2_REG_RQ_RD_MBS0 + 8, r_order); + REG_WR(bp, PXP2_REG_RQ_RD_MBS1, r_order); + if (r_order == MAX_RD_ORD) + REG_WR(bp, PXP2_REG_RQ_PDR_LIMIT, 0xe00); + + REG_WR(bp, PXP2_REG_WR_USDMDP_TH, (0x18 << w_order)); REG_WR(bp, PXP2_REG_WR_DMAE_TH, (128 << w_order)/16); } diff --git a/drivers/net/bnx2x_reg.h b/drivers/net/bnx2x_reg.h index 86055297ab02..5a1aa0b55044 100644 --- a/drivers/net/bnx2x_reg.h +++ b/drivers/net/bnx2x_reg.h @@ -1,6 +1,6 @@ /* bnx2x_reg.h: Broadcom Everest network driver. * - * Copyright (c) 2007 Broadcom Corporation + * Copyright (c) 2007-2008 Broadcom Corporation * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -24,6 +24,8 @@ #define BRB1_REG_BRB1_INT_STS 0x6011c /* [RW 4] Parity mask register #0 read/write */ #define BRB1_REG_BRB1_PRTY_MASK 0x60138 +/* [R 4] Parity register #0 read */ +#define BRB1_REG_BRB1_PRTY_STS 0x6012c /* [RW 10] At address BRB1_IND_FREE_LIST_PRS_CRDT initialize free head. At address BRB1_IND_FREE_LIST_PRS_CRDT+1 initialize free tail. At address BRB1_IND_FREE_LIST_PRS_CRDT+2 initialize parser initial credit. */ @@ -281,6 +283,8 @@ #define CDU_REG_CDU_INT_STS 0x101030 /* [RW 5] Parity mask register #0 read/write */ #define CDU_REG_CDU_PRTY_MASK 0x10104c +/* [R 5] Parity register #0 read */ +#define CDU_REG_CDU_PRTY_STS 0x101040 /* [RC 32] logging of error data in case of a CDU load error: {expected_cid[15:0]; xpected_type[2:0]; xpected_region[2:0]; ctive_error; ype_error; ctual_active; ctual_compressed_context}; */ @@ -308,6 +312,8 @@ #define CFC_REG_CFC_INT_STS_CLR 0x104100 /* [RW 4] Parity mask register #0 read/write */ #define CFC_REG_CFC_PRTY_MASK 0x104118 +/* [R 4] Parity register #0 read */ +#define CFC_REG_CFC_PRTY_STS 0x10410c /* [RW 21] CID cam access (21:1 - Data; alid - 0) */ #define CFC_REG_CID_CAM 0x104800 #define CFC_REG_CONTROL0 0x104028 @@ -354,6 +360,8 @@ #define CSDM_REG_CSDM_INT_MASK_1 0xc22ac /* [RW 11] Parity mask register #0 read/write */ #define CSDM_REG_CSDM_PRTY_MASK 0xc22bc +/* [R 11] Parity register #0 read */ +#define CSDM_REG_CSDM_PRTY_STS 0xc22b0 #define CSDM_REG_ENABLE_IN1 0xc2238 #define CSDM_REG_ENABLE_IN2 0xc223c #define CSDM_REG_ENABLE_OUT1 0xc2240 @@ -438,6 +446,9 @@ /* [RW 32] Parity mask register #0 read/write */ #define CSEM_REG_CSEM_PRTY_MASK_0 0x200130 #define CSEM_REG_CSEM_PRTY_MASK_1 0x200140 +/* [R 32] Parity register #0 read */ +#define CSEM_REG_CSEM_PRTY_STS_0 0x200124 +#define CSEM_REG_CSEM_PRTY_STS_1 0x200134 #define CSEM_REG_ENABLE_IN 0x2000a4 #define CSEM_REG_ENABLE_OUT 0x2000a8 /* [RW 32] This address space contains all registers and memories that are @@ -526,6 +537,8 @@ #define CSEM_REG_TS_9_AS 0x20005c /* [RW 1] Parity mask register #0 read/write */ #define DBG_REG_DBG_PRTY_MASK 0xc0a8 +/* [R 1] Parity register #0 read */ +#define DBG_REG_DBG_PRTY_STS 0xc09c /* [RW 2] debug only: These bits indicate the credit for PCI request type 4 interface; MUST be configured AFTER pci_ext_buffer_strt_addr_lsb/msb are configured */ @@ -543,6 +556,8 @@ #define DMAE_REG_DMAE_INT_MASK 0x102054 /* [RW 4] Parity mask register #0 read/write */ #define DMAE_REG_DMAE_PRTY_MASK 0x102064 +/* [R 4] Parity register #0 read */ +#define DMAE_REG_DMAE_PRTY_STS 0x102058 /* [RW 1] Command 0 go. */ #define DMAE_REG_GO_C0 0x102080 /* [RW 1] Command 1 go. */ @@ -623,6 +638,8 @@ #define DORQ_REG_DORQ_INT_STS_CLR 0x170178 /* [RW 2] Parity mask register #0 read/write */ #define DORQ_REG_DORQ_PRTY_MASK 0x170190 +/* [R 2] Parity register #0 read */ +#define DORQ_REG_DORQ_PRTY_STS 0x170184 /* [RW 8] The address to write the DPM CID to STORM. */ #define DORQ_REG_DPM_CID_ADDR 0x170044 /* [RW 5] The DPM mode CID extraction offset. */ @@ -692,6 +709,8 @@ #define HC_REG_CONFIG_1 0x108004 /* [RW 3] Parity mask register #0 read/write */ #define HC_REG_HC_PRTY_MASK 0x1080a0 +/* [R 3] Parity register #0 read */ +#define HC_REG_HC_PRTY_STS 0x108094 /* [RW 17] status block interrupt mask; one in each bit means unmask; zerow in each bit means mask; bit 0 - default SB; bit 1 - SB_0; bit 2 - SB_1... bit 16- SB_15; addr 0 - port 0; addr 1 - port 1 */ @@ -1127,6 +1146,7 @@ #define MISC_REG_AEU_GENERAL_ATTN_17 0xa044 #define MISC_REG_AEU_GENERAL_ATTN_18 0xa048 #define MISC_REG_AEU_GENERAL_ATTN_19 0xa04c +#define MISC_REG_AEU_GENERAL_ATTN_10 0xa028 #define MISC_REG_AEU_GENERAL_ATTN_11 0xa02c #define MISC_REG_AEU_GENERAL_ATTN_2 0xa008 #define MISC_REG_AEU_GENERAL_ATTN_20 0xa050 @@ -1135,6 +1155,9 @@ #define MISC_REG_AEU_GENERAL_ATTN_4 0xa010 #define MISC_REG_AEU_GENERAL_ATTN_5 0xa014 #define MISC_REG_AEU_GENERAL_ATTN_6 0xa018 +#define MISC_REG_AEU_GENERAL_ATTN_7 0xa01c +#define MISC_REG_AEU_GENERAL_ATTN_8 0xa020 +#define MISC_REG_AEU_GENERAL_ATTN_9 0xa024 /* [RW 32] first 32b for inverting the input for function 0; for each bit: 0= do not invert; 1= invert; mapped as follows: [0] NIG attention for function0; [1] NIG attention for function1; [2] GPIO1 mcp; [3] GPIO2 mcp; @@ -1183,6 +1206,40 @@ starts at 0x0 for the A0 tape-out and increments by one for each all-layer tape-out. */ #define MISC_REG_CHIP_REV 0xa40c +/* [RW 32] The following driver registers(1..6) represent 6 drivers and 32 + clients. Each client can be controlled by one driver only. One in each + bit represent that this driver control the appropriate client (Ex: bit 5 + is set means this driver control client number 5). addr1 = set; addr0 = + clear; read from both addresses will give the same result = status. write + to address 1 will set a request to control all the clients that their + appropriate bit (in the write command) is set. if the client is free (the + appropriate bit in all the other drivers is clear) one will be written to + that driver register; if the client isn't free the bit will remain zero. + if the appropriate bit is set (the driver request to gain control on a + client it already controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW + interrupt will be asserted). write to address 0 will set a request to + free all the clients that their appropriate bit (in the write command) is + set. if the appropriate bit is clear (the driver request to free a client + it doesn't controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW interrupt will + be asserted). */ +#define MISC_REG_DRIVER_CONTROL_1 0xa510 +/* [RW 32] GPIO. [31-28] FLOAT port 0; [27-24] FLOAT port 0; When any of + these bits is written as a '1'; the corresponding SPIO bit will turn off + it's drivers and become an input. This is the reset state of all GPIO + pins. The read value of these bits will be a '1' if that last command + (#SET; #CLR; or #FLOAT) for this bit was a #FLOAT. (reset value 0xff). + [23-20] CLR port 1; 19-16] CLR port 0; When any of these bits is written + as a '1'; the corresponding GPIO bit will drive low. The read value of + these bits will be a '1' if that last command (#SET; #CLR; or #FLOAT) for + this bit was a #CLR. (reset value 0). [15-12] SET port 1; 11-8] port 0; + SET When any of these bits is written as a '1'; the corresponding GPIO + bit will drive high (if it has that capability). The read value of these + bits will be a '1' if that last command (#SET; #CLR; or #FLOAT) for this + bit was a #SET. (reset value 0). [7-4] VALUE port 1; [3-0] VALUE port 0; + RO; These bits indicate the read value of each of the eight GPIO pins. + This is the result value of the pin; not the drive value. Writing these + bits will have not effect. */ +#define MISC_REG_GPIO 0xa490 /* [RW 1] Setting this bit enables a timer in the GRC block to timeout any access that does not finish within ~misc_registers_grc_timout_val.grc_timeout_val cycles. When this bit is @@ -1223,6 +1280,8 @@ #define MISC_REG_MISC_INT_MASK 0xa388 /* [RW 1] Parity mask register #0 read/write */ #define MISC_REG_MISC_PRTY_MASK 0xa398 +/* [R 1] Parity register #0 read */ +#define MISC_REG_MISC_PRTY_STS 0xa38c /* [RW 32] 32 LSB of storm PLL first register; reset val = 0x 071d2911. inside order of the bits is: [0] P1 divider[0] (reset value 1); [1] P1 divider[1] (reset value 0); [2] P1 divider[2] (reset value 0); [3] P1 @@ -1264,6 +1323,55 @@ /* [RW 20] 20 bit GRC address where the scratch-pad of the MCP that is shared with the driver resides */ #define MISC_REG_SHARED_MEM_ADDR 0xa2b4 +/* [RW 32] SPIO. [31-24] FLOAT When any of these bits is written as a '1'; + the corresponding SPIO bit will turn off it's drivers and become an + input. This is the reset state of all SPIO pins. The read value of these + bits will be a '1' if that last command (#SET; #CL; or #FLOAT) for this + bit was a #FLOAT. (reset value 0xff). [23-16] CLR When any of these bits + is written as a '1'; the corresponding SPIO bit will drive low. The read + value of these bits will be a '1' if that last command (#SET; #CLR; or +#FLOAT) for this bit was a #CLR. (reset value 0). [15-8] SET When any of + these bits is written as a '1'; the corresponding SPIO bit will drive + high (if it has that capability). The read value of these bits will be a + '1' if that last command (#SET; #CLR; or #FLOAT) for this bit was a #SET. + (reset value 0). [7-0] VALUE RO; These bits indicate the read value of + each of the eight SPIO pins. This is the result value of the pin; not the + drive value. Writing these bits will have not effect. Each 8 bits field + is divided as follows: [0] VAUX Enable; when pulsed low; enables supply + from VAUX. (This is an output pin only; the FLOAT field is not applicable + for this pin); [1] VAUX Disable; when pulsed low; disables supply form + VAUX. (This is an output pin only; FLOAT field is not applicable for this + pin); [2] SEL_VAUX_B - Control to power switching logic. Drive low to + select VAUX supply. (This is an output pin only; it is not controlled by + the SET and CLR fields; it is controlled by the Main Power SM; the FLOAT + field is not applicable for this pin; only the VALUE fields is relevant - + it reflects the output value); [3] reserved; [4] spio_4; [5] spio_5; [6] + Bit 0 of UMP device ID select; read by UMP firmware; [7] Bit 1 of UMP + device ID select; read by UMP firmware. */ +#define MISC_REG_SPIO 0xa4fc +/* [RW 8] These bits enable the SPIO_INTs to signals event to the IGU/MC. + according to the following map: [3:0] reserved; [4] spio_4 [5] spio_5; + [7:0] reserved */ +#define MISC_REG_SPIO_EVENT_EN 0xa2b8 +/* [RW 32] SPIO INT. [31-24] OLD_CLR Writing a '1' to these bit clears the + corresponding bit in the #OLD_VALUE register. This will acknowledge an + interrupt on the falling edge of corresponding SPIO input (reset value + 0). [23-16] OLD_SET Writing a '1' to these bit sets the corresponding bit + in the #OLD_VALUE register. This will acknowledge an interrupt on the + rising edge of corresponding SPIO input (reset value 0). [15-8] OLD_VALUE + RO; These bits indicate the old value of the SPIO input value. When the + ~INT_STATE bit is set; this bit indicates the OLD value of the pin such + that if ~INT_STATE is set and this bit is '0'; then the interrupt is due + to a low to high edge. If ~INT_STATE is set and this bit is '1'; then the + interrupt is due to a high to low edge (reset value 0). [7-0] INT_STATE + RO; These bits indicate the current SPIO interrupt state for each SPIO + pin. This bit is cleared when the appropriate #OLD_SET or #OLD_CLR + command bit is written. This bit is set when the SPIO input does not + match the current value in #OLD_VALUE (reset value 0). */ +#define MISC_REG_SPIO_INT 0xa500 +/* [RW 1] Set by the MCP to remember if one or more of the drivers is/are + loaded; 0-prepare; -unprepare */ +#define MISC_REG_UNPREPARED 0xa424 #define NIG_MASK_INTERRUPT_PORT0_REG_MASK_EMAC0_MISC_MI_INT (0x1<<0) #define NIG_MASK_INTERRUPT_PORT0_REG_MASK_SERDES0_LINK_STATUS (0x1<<9) #define NIG_MASK_INTERRUPT_PORT0_REG_MASK_XGXS0_LINK10G (0x1<<15) @@ -1392,6 +1500,9 @@ #define NIG_REG_NIG_INGRESS_EMAC0_NO_CRC 0x10044 /* [RW 1] Input enable for RX PBF LP IF */ #define NIG_REG_PBF_LB_IN_EN 0x100b4 +/* [RW 1] Value of this register will be transmitted to port swap when + ~nig_registers_strap_override.strap_override =1 */ +#define NIG_REG_PORT_SWAP 0x10394 /* [RW 1] output enable for RX parser descriptor IF */ #define NIG_REG_PRS_EOP_OUT_EN 0x10104 /* [RW 1] Input enable for RX parser request IF */ @@ -1410,6 +1521,10 @@ #define NIG_REG_STAT2_BRB_OCTET 0x107e0 #define NIG_REG_STATUS_INTERRUPT_PORT0 0x10328 #define NIG_REG_STATUS_INTERRUPT_PORT1 0x1032c +/* [RW 1] port swap mux selection. If this register equal to 0 then port + swap is equal to SPIO pin that inputs from ifmux_serdes_swap. If 1 then + ort swap is equal to ~nig_registers_port_swap.port_swap */ +#define NIG_REG_STRAP_OVERRIDE 0x10398 /* [RW 1] output enable for RX_XCM0 IF */ #define NIG_REG_XCM0_OUT_EN 0x100f0 /* [RW 1] output enable for RX_XCM1 IF */ @@ -1499,6 +1614,8 @@ #define PB_REG_PB_INT_STS 0x1c /* [RW 4] Parity mask register #0 read/write */ #define PB_REG_PB_PRTY_MASK 0x38 +/* [R 4] Parity register #0 read */ +#define PB_REG_PB_PRTY_STS 0x2c #define PRS_REG_A_PRSU_20 0x40134 /* [R 8] debug only: CFC load request current credit. Transaction based. */ #define PRS_REG_CFC_LD_CURRENT_CREDIT 0x40164 @@ -1590,6 +1707,8 @@ #define PRS_REG_PRS_INT_STS 0x40188 /* [RW 8] Parity mask register #0 read/write */ #define PRS_REG_PRS_PRTY_MASK 0x401a4 +/* [R 8] Parity register #0 read */ +#define PRS_REG_PRS_PRTY_STS 0x40198 /* [RW 8] Context region for pure acknowledge packets. Used in CFC load request message */ #define PRS_REG_PURE_REGIONS 0x40024 @@ -1718,6 +1837,9 @@ /* [RW 32] Parity mask register #0 read/write */ #define PXP2_REG_PXP2_PRTY_MASK_0 0x120588 #define PXP2_REG_PXP2_PRTY_MASK_1 0x120598 +/* [R 32] Parity register #0 read */ +#define PXP2_REG_PXP2_PRTY_STS_0 0x12057c +#define PXP2_REG_PXP2_PRTY_STS_1 0x12058c /* [R 1] Debug only: The 'almost full' indication from each fifo (gives indication about backpressure) */ #define PXP2_REG_RD_ALMOST_FULL_0 0x120424 @@ -1911,6 +2033,8 @@ #define PXP2_REG_RQ_HC_ENDIAN_M 0x1201a8 /* [WB 53] Onchip address table */ #define PXP2_REG_RQ_ONCHIP_AT 0x122000 +/* [RW 13] Pending read limiter threshold; in Dwords */ +#define PXP2_REG_RQ_PDR_LIMIT 0x12033c /* [RW 2] Endian mode for qm */ #define PXP2_REG_RQ_QM_ENDIAN_M 0x120194 /* [RW 3] page size in L2P table for QM module; -4k; -8k; -16k; -32k; -64k; @@ -1921,6 +2045,9 @@ /* [RW 3] Max burst size filed for read requests port 0; 000 - 128B; 001:256B; 010: 512B; 11:1K:100:2K; 01:4K */ #define PXP2_REG_RQ_RD_MBS0 0x120160 +/* [RW 3] Max burst size filed for read requests port 1; 000 - 128B; + 001:256B; 010: 512B; 11:1K:100:2K; 01:4K */ +#define PXP2_REG_RQ_RD_MBS1 0x120168 /* [RW 2] Endian mode for src */ #define PXP2_REG_RQ_SRC_ENDIAN_M 0x12019c /* [RW 3] page size in L2P table for SRC module; -4k; -8k; -16k; -32k; -64k; @@ -2000,10 +2127,17 @@ /* [RW 3] Max burst size filed for write requests port 0; 000 - 128B; 001:256B; 010: 512B; */ #define PXP2_REG_RQ_WR_MBS0 0x12015c +/* [RW 3] Max burst size filed for write requests port 1; 000 - 128B; + 001:256B; 010: 512B; */ +#define PXP2_REG_RQ_WR_MBS1 0x120164 /* [RW 10] if Number of entries in dmae fifo will be higer than this threshold then has_payload indication will be asserted; the default value should be equal to > write MBS size! */ #define PXP2_REG_WR_DMAE_TH 0x120368 +/* [RW 10] if Number of entries in usdmdp fifo will be higer than this + threshold then has_payload indication will be asserted; the default value + should be equal to > write MBS size! */ +#define PXP2_REG_WR_USDMDP_TH 0x120348 /* [R 1] debug only: Indication if PSWHST arbiter is idle */ #define PXP_REG_HST_ARB_IS_IDLE 0x103004 /* [R 8] debug only: A bit mask for all PSWHST arbiter clients. '1' means @@ -2021,6 +2155,8 @@ #define PXP_REG_PXP_INT_STS_CLR_0 0x10306c /* [RW 26] Parity mask register #0 read/write */ #define PXP_REG_PXP_PRTY_MASK 0x103094 +/* [R 26] Parity register #0 read */ +#define PXP_REG_PXP_PRTY_STS 0x103088 /* [RW 4] The activity counter initial increment value sent in the load request */ #define QM_REG_ACTCTRINITVAL_0 0x168040 @@ -2127,6 +2263,8 @@ #define QM_REG_QM_INT_STS 0x168438 /* [RW 9] Parity mask register #0 read/write */ #define QM_REG_QM_PRTY_MASK 0x168454 +/* [R 9] Parity register #0 read */ +#define QM_REG_QM_PRTY_STS 0x168448 /* [R 32] Current queues in pipeline: Queues from 32 to 63 */ #define QM_REG_QSTATUS_HIGH 0x16802c /* [R 32] Current queues in pipeline: Queues from 0 to 31 */ @@ -2410,6 +2548,8 @@ #define SRC_REG_SRC_INT_STS 0x404ac /* [RW 3] Parity mask register #0 read/write */ #define SRC_REG_SRC_PRTY_MASK 0x404c8 +/* [R 3] Parity register #0 read */ +#define SRC_REG_SRC_PRTY_STS 0x404bc /* [R 4] Used to read the value of the XX protection CAM occupancy counter. */ #define TCM_REG_CAM_OCCUP 0x5017c /* [RW 1] CDU AG read Interface enable. If 0 - the request input is @@ -2730,6 +2870,8 @@ #define TSDM_REG_TSDM_INT_MASK_1 0x422ac /* [RW 11] Parity mask register #0 read/write */ #define TSDM_REG_TSDM_PRTY_MASK 0x422bc +/* [R 11] Parity register #0 read */ +#define TSDM_REG_TSDM_PRTY_STS 0x422b0 /* [RW 5] The number of time_slots in the arbitration cycle */ #define TSEM_REG_ARB_CYCLE_SIZE 0x180034 /* [RW 3] The source that is associated with arbitration element 0. Source @@ -2854,6 +2996,9 @@ /* [RW 32] Parity mask register #0 read/write */ #define TSEM_REG_TSEM_PRTY_MASK_0 0x180120 #define TSEM_REG_TSEM_PRTY_MASK_1 0x180130 +/* [R 32] Parity register #0 read */ +#define TSEM_REG_TSEM_PRTY_STS_0 0x180114 +#define TSEM_REG_TSEM_PRTY_STS_1 0x180124 /* [R 5] Used to read the XX protection CAM occupancy counter. */ #define UCM_REG_CAM_OCCUP 0xe0170 /* [RW 1] CDU AG read Interface enable. If 0 - the request input is @@ -3155,6 +3300,8 @@ #define USDM_REG_USDM_INT_MASK_1 0xc42b0 /* [RW 11] Parity mask register #0 read/write */ #define USDM_REG_USDM_PRTY_MASK 0xc42c0 +/* [R 11] Parity register #0 read */ +#define USDM_REG_USDM_PRTY_STS 0xc42b4 /* [RW 5] The number of time_slots in the arbitration cycle */ #define USEM_REG_ARB_CYCLE_SIZE 0x300034 /* [RW 3] The source that is associated with arbitration element 0. Source @@ -3279,6 +3426,9 @@ /* [RW 32] Parity mask register #0 read/write */ #define USEM_REG_USEM_PRTY_MASK_0 0x300130 #define USEM_REG_USEM_PRTY_MASK_1 0x300140 +/* [R 32] Parity register #0 read */ +#define USEM_REG_USEM_PRTY_STS_0 0x300124 +#define USEM_REG_USEM_PRTY_STS_1 0x300134 /* [RW 2] The queue index for registration on Aux1 counter flag. */ #define XCM_REG_AUX1_Q 0x20134 /* [RW 2] Per each decision rule the queue index to register to. */ @@ -3684,6 +3834,8 @@ #define XSDM_REG_XSDM_INT_MASK_1 0x1662ac /* [RW 11] Parity mask register #0 read/write */ #define XSDM_REG_XSDM_PRTY_MASK 0x1662bc +/* [R 11] Parity register #0 read */ +#define XSDM_REG_XSDM_PRTY_STS 0x1662b0 /* [RW 5] The number of time_slots in the arbitration cycle */ #define XSEM_REG_ARB_CYCLE_SIZE 0x280034 /* [RW 3] The source that is associated with arbitration element 0. Source @@ -3808,6 +3960,9 @@ /* [RW 32] Parity mask register #0 read/write */ #define XSEM_REG_XSEM_PRTY_MASK_0 0x280130 #define XSEM_REG_XSEM_PRTY_MASK_1 0x280140 +/* [R 32] Parity register #0 read */ +#define XSEM_REG_XSEM_PRTY_STS_0 0x280124 +#define XSEM_REG_XSEM_PRTY_STS_1 0x280134 #define MCPR_NVM_ACCESS_ENABLE_EN (1L<<0) #define MCPR_NVM_ACCESS_ENABLE_WR_EN (1L<<1) #define MCPR_NVM_ADDR_NVM_ADDR_VALUE (0xffffffL<<0) @@ -3847,6 +4002,8 @@ #define EMAC_MDIO_COMM_START_BUSY (1L<<29) #define EMAC_MDIO_MODE_AUTO_POLL (1L<<4) #define EMAC_MDIO_MODE_CLAUSE_45 (1L<<31) +#define EMAC_MDIO_MODE_CLOCK_CNT (0x3fL<<16) +#define EMAC_MDIO_MODE_CLOCK_CNT_BITSHIFT 16 #define EMAC_MODE_25G_MODE (1L<<5) #define EMAC_MODE_ACPI_RCVD (1L<<20) #define EMAC_MODE_HALF_DUPLEX (1L<<1) @@ -3874,6 +4031,17 @@ #define EMAC_RX_MTU_SIZE_JUMBO_ENA (1L<<31) #define EMAC_TX_MODE_EXT_PAUSE_EN (1L<<3) #define EMAC_TX_MODE_RESET (1L<<0) +#define MISC_REGISTERS_GPIO_1 1 +#define MISC_REGISTERS_GPIO_2 2 +#define MISC_REGISTERS_GPIO_3 3 +#define MISC_REGISTERS_GPIO_CLR_POS 16 +#define MISC_REGISTERS_GPIO_FLOAT (0xffL<<24) +#define MISC_REGISTERS_GPIO_FLOAT_POS 24 +#define MISC_REGISTERS_GPIO_INPUT_HI_Z 2 +#define MISC_REGISTERS_GPIO_OUTPUT_HIGH 1 +#define MISC_REGISTERS_GPIO_OUTPUT_LOW 0 +#define MISC_REGISTERS_GPIO_PORT_SHIFT 4 +#define MISC_REGISTERS_GPIO_SET_POS 8 #define MISC_REGISTERS_RESET_REG_1_CLEAR 0x588 #define MISC_REGISTERS_RESET_REG_1_SET 0x584 #define MISC_REGISTERS_RESET_REG_2_CLEAR 0x598 @@ -3891,6 +4059,25 @@ #define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_RSTB_HW (0x1<<4) #define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_TXD_FIFO_RSTB (0x1<<8) #define MISC_REGISTERS_RESET_REG_3_SET 0x5a4 +#define MISC_REGISTERS_SPIO_4 4 +#define MISC_REGISTERS_SPIO_5 5 +#define MISC_REGISTERS_SPIO_7 7 +#define MISC_REGISTERS_SPIO_CLR_POS 16 +#define MISC_REGISTERS_SPIO_FLOAT (0xffL<<24) +#define GRC_MISC_REGISTERS_SPIO_FLOAT7 0x80000000 +#define GRC_MISC_REGISTERS_SPIO_FLOAT6 0x40000000 +#define GRC_MISC_REGISTERS_SPIO_FLOAT5 0x20000000 +#define GRC_MISC_REGISTERS_SPIO_FLOAT4 0x10000000 +#define MISC_REGISTERS_SPIO_FLOAT_POS 24 +#define MISC_REGISTERS_SPIO_INPUT_HI_Z 2 +#define MISC_REGISTERS_SPIO_INT_OLD_SET_POS 16 +#define MISC_REGISTERS_SPIO_OUTPUT_HIGH 1 +#define MISC_REGISTERS_SPIO_OUTPUT_LOW 0 +#define MISC_REGISTERS_SPIO_SET_POS 8 +#define HW_LOCK_MAX_RESOURCE_VALUE 31 +#define HW_LOCK_RESOURCE_8072_MDIO 0 +#define HW_LOCK_RESOURCE_GPIO 1 +#define HW_LOCK_RESOURCE_SPIO 2 #define AEU_INPUTS_ATTN_BITS_BRB_PARITY_ERROR (1<<18) #define AEU_INPUTS_ATTN_BITS_CCM_HW_INTERRUPT (1<<31) #define AEU_INPUTS_ATTN_BITS_CDU_HW_INTERRUPT (1<<9) @@ -3918,6 +4105,7 @@ #define AEU_INPUTS_ATTN_BITS_QM_HW_INTERRUPT (1<<3) #define AEU_INPUTS_ATTN_BITS_QM_PARITY_ERROR (1<<2) #define AEU_INPUTS_ATTN_BITS_SEARCHER_PARITY_ERROR (1<<22) +#define AEU_INPUTS_ATTN_BITS_SPIO5 (1<<15) #define AEU_INPUTS_ATTN_BITS_TCM_HW_INTERRUPT (1<<27) #define AEU_INPUTS_ATTN_BITS_TIMERS_HW_INTERRUPT (1<<5) #define AEU_INPUTS_ATTN_BITS_TSDM_HW_INTERRUPT (1<<25) @@ -4206,6 +4394,9 @@ #define MDIO_XGXS_BLOCK2_RX_LN_SWAP_FORCE_ENABLE 0x4000 #define MDIO_XGXS_BLOCK2_TX_LN_SWAP 0x11 #define MDIO_XGXS_BLOCK2_TX_LN_SWAP_ENABLE 0x8000 +#define MDIO_XGXS_BLOCK2_UNICORE_MODE_10G 0x14 +#define MDIO_XGXS_BLOCK2_UNICORE_MODE_10G_CX4_XGXS 0x0001 +#define MDIO_XGXS_BLOCK2_UNICORE_MODE_10G_HIGIG_XGXS 0x0010 #define MDIO_XGXS_BLOCK2_TEST_MODE_LANE 0x15 #define MDIO_REG_BANK_GP_STATUS 0x8120 @@ -4362,11 +4553,13 @@ #define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_SGMII_MODE 0x0001 +#define EXT_PHY_AUTO_NEG_DEVAD 0x7 #define EXT_PHY_OPT_PMA_PMD_DEVAD 0x1 #define EXT_PHY_OPT_WIS_DEVAD 0x2 #define EXT_PHY_OPT_PCS_DEVAD 0x3 #define EXT_PHY_OPT_PHY_XS_DEVAD 0x4 #define EXT_PHY_OPT_CNTL 0x0 +#define EXT_PHY_OPT_CNTL2 0x7 #define EXT_PHY_OPT_PMD_RX_SD 0xa #define EXT_PHY_OPT_PMD_MISC_CNTL 0xca0a #define EXT_PHY_OPT_PHY_IDENTIFIER 0xc800 @@ -4378,11 +4571,24 @@ #define EXT_PHY_OPT_LASI_STATUS 0x9005 #define EXT_PHY_OPT_PCS_STATUS 0x0020 #define EXT_PHY_OPT_XGXS_LANE_STATUS 0x0018 +#define EXT_PHY_OPT_AN_LINK_STATUS 0x8304 +#define EXT_PHY_OPT_AN_CL37_CL73 0x8370 +#define EXT_PHY_OPT_AN_CL37_FD 0xffe4 +#define EXT_PHY_OPT_AN_CL37_AN 0xffe0 +#define EXT_PHY_OPT_AN_ADV 0x11 #define EXT_PHY_KR_PMA_PMD_DEVAD 0x1 #define EXT_PHY_KR_PCS_DEVAD 0x3 #define EXT_PHY_KR_AUTO_NEG_DEVAD 0x7 #define EXT_PHY_KR_CTRL 0x0000 +#define EXT_PHY_KR_STATUS 0x0001 +#define EXT_PHY_KR_AUTO_NEG_COMPLETE 0x0020 +#define EXT_PHY_KR_AUTO_NEG_ADVERT 0x0010 +#define EXT_PHY_KR_AUTO_NEG_ADVERT_PAUSE 0x0400 +#define EXT_PHY_KR_AUTO_NEG_ADVERT_PAUSE_ASYMMETRIC 0x0800 +#define EXT_PHY_KR_AUTO_NEG_ADVERT_PAUSE_BOTH 0x0C00 +#define EXT_PHY_KR_AUTO_NEG_ADVERT_PAUSE_MASK 0x0C00 +#define EXT_PHY_KR_LP_AUTO_NEG 0x0013 #define EXT_PHY_KR_CTRL2 0x0007 #define EXT_PHY_KR_PCS_STATUS 0x0020 #define EXT_PHY_KR_PMD_CTRL 0x0096 @@ -4391,4 +4597,8 @@ #define EXT_PHY_KR_MISC_CTRL1 0xca85 #define EXT_PHY_KR_GEN_CTRL 0xca10 #define EXT_PHY_KR_ROM_CODE 0xca19 +#define EXT_PHY_KR_ROM_RESET_INTERNAL_MP 0x0188 +#define EXT_PHY_KR_ROM_MICRO_RESET 0x018a + +#define EXT_PHY_SFX7101_XGXS_TEST1 0xc00a diff --git a/drivers/net/cs89x0.c b/drivers/net/cs89x0.c index 571750975137..348371fda597 100644 --- a/drivers/net/cs89x0.c +++ b/drivers/net/cs89x0.c @@ -172,30 +172,30 @@ static char version[] __initdata = them to system IRQ numbers. This mapping is card specific and is set to the configuration of the Cirrus Eval board for this chip. */ #ifdef CONFIG_ARCH_CLPS7500 -static unsigned int netcard_portlist[] __initdata = +static unsigned int netcard_portlist[] __used __initdata = { 0x80090303, 0x300, 0x320, 0x340, 0x360, 0x200, 0x220, 0x240, 0x260, 0x280, 0x2a0, 0x2c0, 0x2e0, 0}; static unsigned int cs8900_irq_map[] = {12,0,0,0}; #elif defined(CONFIG_SH_HICOSH4) -static unsigned int netcard_portlist[] __initdata = +static unsigned int netcard_portlist[] __used __initdata = { 0x0300, 0}; static unsigned int cs8900_irq_map[] = {1,0,0,0}; #elif defined(CONFIG_MACH_IXDP2351) -static unsigned int netcard_portlist[] __initdata = {IXDP2351_VIRT_CS8900_BASE, 0}; +static unsigned int netcard_portlist[] __used __initdata = {IXDP2351_VIRT_CS8900_BASE, 0}; static unsigned int cs8900_irq_map[] = {IRQ_IXDP2351_CS8900, 0, 0, 0}; #include <asm/irq.h> #elif defined(CONFIG_ARCH_IXDP2X01) #include <asm/irq.h> -static unsigned int netcard_portlist[] __initdata = {IXDP2X01_CS8900_VIRT_BASE, 0}; +static unsigned int netcard_portlist[] __used __initdata = {IXDP2X01_CS8900_VIRT_BASE, 0}; static unsigned int cs8900_irq_map[] = {IRQ_IXDP2X01_CS8900, 0, 0, 0}; #elif defined(CONFIG_ARCH_PNX010X) #include <asm/irq.h> #include <asm/arch/gpio.h> #define CIRRUS_DEFAULT_BASE IO_ADDRESS(EXT_STATIC2_s0_BASE + 0x200000) /* = Physical address 0x48200000 */ #define CIRRUS_DEFAULT_IRQ VH_INTC_INT_NUM_CASCADED_INTERRUPT_1 /* Event inputs bank 1 - ID 35/bit 3 */ -static unsigned int netcard_portlist[] __initdata = {CIRRUS_DEFAULT_BASE, 0}; +static unsigned int netcard_portlist[] __used __initdata = {CIRRUS_DEFAULT_BASE, 0}; static unsigned int cs8900_irq_map[] = {CIRRUS_DEFAULT_IRQ, 0, 0, 0}; #else -static unsigned int netcard_portlist[] __initdata = +static unsigned int netcard_portlist[] __used __initdata = { 0x300, 0x320, 0x340, 0x360, 0x200, 0x220, 0x240, 0x260, 0x280, 0x2a0, 0x2c0, 0x2e0, 0}; static unsigned int cs8900_irq_map[] = {10,11,12,5}; #endif diff --git a/drivers/net/e100.c b/drivers/net/e100.c index 36ba6dc96acc..cdf3090a1885 100644 --- a/drivers/net/e100.c +++ b/drivers/net/e100.c @@ -2782,16 +2782,13 @@ static void __devexit e100_remove(struct pci_dev *pdev) } } -#ifdef CONFIG_PM static int e100_suspend(struct pci_dev *pdev, pm_message_t state) { struct net_device *netdev = pci_get_drvdata(pdev); struct nic *nic = netdev_priv(netdev); if (netif_running(netdev)) - napi_disable(&nic->napi); - del_timer_sync(&nic->watchdog); - netif_carrier_off(nic->netdev); + e100_down(nic); netif_device_detach(netdev); pci_save_state(pdev); @@ -2804,14 +2801,13 @@ static int e100_suspend(struct pci_dev *pdev, pm_message_t state) pci_enable_wake(pdev, PCI_D3cold, 0); } - free_irq(pdev->irq, netdev); - pci_disable_device(pdev); pci_set_power_state(pdev, PCI_D3hot); return 0; } +#ifdef CONFIG_PM static int e100_resume(struct pci_dev *pdev) { struct net_device *netdev = pci_get_drvdata(pdev); @@ -2832,26 +2828,7 @@ static int e100_resume(struct pci_dev *pdev) static void e100_shutdown(struct pci_dev *pdev) { - struct net_device *netdev = pci_get_drvdata(pdev); - struct nic *nic = netdev_priv(netdev); - - if (netif_running(netdev)) - napi_disable(&nic->napi); - del_timer_sync(&nic->watchdog); - netif_carrier_off(nic->netdev); - - if ((nic->flags & wol_magic) | e100_asf(nic)) { - pci_enable_wake(pdev, PCI_D3hot, 1); - pci_enable_wake(pdev, PCI_D3cold, 1); - } else { - pci_enable_wake(pdev, PCI_D3hot, 0); - pci_enable_wake(pdev, PCI_D3cold, 0); - } - - free_irq(pdev->irq, netdev); - - pci_disable_device(pdev); - pci_set_power_state(pdev, PCI_D3hot); + e100_suspend(pdev, PMSG_SUSPEND); } /* ------------------ PCI Error Recovery infrastructure -------------- */ diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c index 3beace55b58d..7fe20310eb5f 100644 --- a/drivers/net/e1000e/82571.c +++ b/drivers/net/e1000e/82571.c @@ -438,7 +438,7 @@ static void e1000_release_nvm_82571(struct e1000_hw *hw) * For non-82573 silicon, write data to EEPROM at offset using SPI interface. * * If e1000e_update_nvm_checksum is not called after this function, the - * EEPROM will most likley contain an invalid checksum. + * EEPROM will most likely contain an invalid checksum. **/ static s32 e1000_write_nvm_82571(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) @@ -547,7 +547,7 @@ static s32 e1000_validate_nvm_checksum_82571(struct e1000_hw *hw) * poll for completion. * * If e1000e_update_nvm_checksum is not called after this function, the - * EEPROM will most likley contain an invalid checksum. + * EEPROM will most likely contain an invalid checksum. **/ static s32 e1000_write_nvm_eewr_82571(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) @@ -1053,7 +1053,7 @@ static s32 e1000_setup_fiber_serdes_link_82571(struct e1000_hw *hw) /* If SerDes loopback mode is entered, there is no form * of reset to take the adapter out of that mode. So we * have to explicitly take the adapter out of loopback - * mode. This prevents drivers from twidling their thumbs + * mode. This prevents drivers from twiddling their thumbs * if another tool failed to take it out of loopback mode. */ ew32(SCTL, @@ -1098,7 +1098,7 @@ static s32 e1000_valid_led_default_82571(struct e1000_hw *hw, u16 *data) * e1000e_get_laa_state_82571 - Get locally administered address state * @hw: pointer to the HW structure * - * Retrieve and return the current locally administed address state. + * Retrieve and return the current locally administered address state. **/ bool e1000e_get_laa_state_82571(struct e1000_hw *hw) { @@ -1113,7 +1113,7 @@ bool e1000e_get_laa_state_82571(struct e1000_hw *hw) * @hw: pointer to the HW structure * @state: enable/disable locally administered address * - * Enable/Disable the current locally administed address state. + * Enable/Disable the current locally administers address state. **/ void e1000e_set_laa_state_82571(struct e1000_hw *hw, bool state) { @@ -1281,16 +1281,6 @@ static struct e1000_phy_operations e82_phy_ops_m88 = { static struct e1000_nvm_operations e82571_nvm_ops = { .acquire_nvm = e1000_acquire_nvm_82571, - .read_nvm = e1000e_read_nvm_spi, - .release_nvm = e1000_release_nvm_82571, - .update_nvm = e1000_update_nvm_checksum_82571, - .valid_led_default = e1000_valid_led_default_82571, - .validate_nvm = e1000_validate_nvm_checksum_82571, - .write_nvm = e1000_write_nvm_82571, -}; - -static struct e1000_nvm_operations e82573_nvm_ops = { - .acquire_nvm = e1000_acquire_nvm_82571, .read_nvm = e1000e_read_nvm_eerd, .release_nvm = e1000_release_nvm_82571, .update_nvm = e1000_update_nvm_checksum_82571, @@ -1355,6 +1345,6 @@ struct e1000_info e1000_82573_info = { .get_invariants = e1000_get_invariants_82571, .mac_ops = &e82571_mac_ops, .phy_ops = &e82_phy_ops_m88, - .nvm_ops = &e82573_nvm_ops, + .nvm_ops = &e82571_nvm_ops, }; diff --git a/drivers/net/e1000e/defines.h b/drivers/net/e1000e/defines.h index 6232c3e96689..a4f511f549f7 100644 --- a/drivers/net/e1000e/defines.h +++ b/drivers/net/e1000e/defines.h @@ -66,7 +66,7 @@ #define E1000_WUFC_ARP 0x00000020 /* ARP Request Packet Wakeup Enable */ /* Extended Device Control */ -#define E1000_CTRL_EXT_SDP7_DATA 0x00000080 /* Value of SW Defineable Pin 7 */ +#define E1000_CTRL_EXT_SDP7_DATA 0x00000080 /* Value of SW Definable Pin 7 */ #define E1000_CTRL_EXT_EE_RST 0x00002000 /* Reinitialize from EEPROM */ #define E1000_CTRL_EXT_RO_DIS 0x00020000 /* Relaxed Ordering disable */ #define E1000_CTRL_EXT_LINK_MODE_MASK 0x00C00000 @@ -75,12 +75,12 @@ #define E1000_CTRL_EXT_IAME 0x08000000 /* Interrupt acknowledge Auto-mask */ #define E1000_CTRL_EXT_INT_TIMER_CLR 0x20000000 /* Clear Interrupt timers after IMS clear */ -/* Receive Decriptor bit definitions */ +/* Receive Descriptor bit definitions */ #define E1000_RXD_STAT_DD 0x01 /* Descriptor Done */ #define E1000_RXD_STAT_EOP 0x02 /* End of Packet */ #define E1000_RXD_STAT_IXSM 0x04 /* Ignore checksum */ #define E1000_RXD_STAT_VP 0x08 /* IEEE VLAN Packet */ -#define E1000_RXD_STAT_UDPCS 0x10 /* UDP xsum caculated */ +#define E1000_RXD_STAT_UDPCS 0x10 /* UDP xsum calculated */ #define E1000_RXD_STAT_TCPCS 0x20 /* TCP xsum calculated */ #define E1000_RXD_ERR_CE 0x01 /* CRC Error */ #define E1000_RXD_ERR_SE 0x02 /* Symbol Error */ @@ -223,7 +223,7 @@ #define E1000_STATUS_LAN_INIT_DONE 0x00000200 /* Lan Init Completion by NVM */ #define E1000_STATUS_GIO_MASTER_ENABLE 0x00080000 /* Status of Master requests. */ -/* Constants used to intrepret the masked PCI-X bus speed. */ +/* Constants used to interpret the masked PCI-X bus speed. */ #define HALF_DUPLEX 1 #define FULL_DUPLEX 2 @@ -517,7 +517,7 @@ /* PHY 1000 MII Register/Bit Definitions */ /* PHY Registers defined by IEEE */ #define PHY_CONTROL 0x00 /* Control Register */ -#define PHY_STATUS 0x01 /* Status Regiser */ +#define PHY_STATUS 0x01 /* Status Register */ #define PHY_ID1 0x02 /* Phy Id Reg (word 1) */ #define PHY_ID2 0x03 /* Phy Id Reg (word 2) */ #define PHY_AUTONEG_ADV 0x04 /* Autoneg Advertisement */ diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h index 8b88c226e858..327c0620da31 100644 --- a/drivers/net/e1000e/e1000.h +++ b/drivers/net/e1000e/e1000.h @@ -42,8 +42,7 @@ struct e1000_info; #define ndev_printk(level, netdev, format, arg...) \ - printk(level "%s: %s: " format, (netdev)->dev.parent->bus_id, \ - (netdev)->name, ## arg) + printk(level "%s: " format, (netdev)->name, ## arg) #ifdef DEBUG #define ndev_dbg(netdev, format, arg...) \ diff --git a/drivers/net/e1000e/hw.h b/drivers/net/e1000e/hw.h index 3c5862f97dbf..916025b30fc3 100644 --- a/drivers/net/e1000e/hw.h +++ b/drivers/net/e1000e/hw.h @@ -184,7 +184,7 @@ enum e1e_registers { E1000_ICRXDMTC = 0x04120, /* Irq Cause Rx Desc MinThreshold Count */ E1000_ICRXOC = 0x04124, /* Irq Cause Receiver Overrun Count */ E1000_RXCSUM = 0x05000, /* RX Checksum Control - RW */ - E1000_RFCTL = 0x05008, /* Receive Filter Control*/ + E1000_RFCTL = 0x05008, /* Receive Filter Control */ E1000_MTA = 0x05200, /* Multicast Table Array - RW Array */ E1000_RA = 0x05400, /* Receive Address - RW Array */ E1000_VFTA = 0x05600, /* VLAN Filter Table Array - RW Array */ @@ -202,7 +202,7 @@ enum e1e_registers { E1000_FACTPS = 0x05B30, /* Function Active and Power State to MNG */ E1000_SWSM = 0x05B50, /* SW Semaphore */ E1000_FWSM = 0x05B54, /* FW Semaphore */ - E1000_HICR = 0x08F00, /* Host Inteface Control */ + E1000_HICR = 0x08F00, /* Host Interface Control */ }; /* RSS registers */ diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index 8f8139de1f48..0ae39550768d 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -671,7 +671,7 @@ static s32 e1000_get_phy_info_ich8lan(struct e1000_hw *hw) * e1000_check_polarity_ife_ich8lan - Check cable polarity for IFE PHY * @hw: pointer to the HW structure * - * Polarity is determined on the polarity reveral feature being enabled. + * Polarity is determined on the polarity reversal feature being enabled. * This function is only called by other family-specific * routines. **/ @@ -947,7 +947,7 @@ static s32 e1000_flash_cycle_init_ich8lan(struct e1000_hw *hw) /* Either we should have a hardware SPI cycle in progress * bit to check against, in order to start a new cycle or * FDONE bit should be changed in the hardware so that it - * is 1 after harware reset, which can then be used as an + * is 1 after hardware reset, which can then be used as an * indication whether a cycle is in progress or has been * completed. */ @@ -1155,7 +1155,7 @@ static s32 e1000_write_nvm_ich8lan(struct e1000_hw *hw, u16 offset, u16 words, * which writes the checksum to the shadow ram. The changes in the shadow * ram are then committed to the EEPROM by processing each bank at a time * checking for the modified bit and writing only the pending changes. - * After a succesful commit, the shadow ram is cleared and is ready for + * After a successful commit, the shadow ram is cleared and is ready for * future writes. **/ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw) @@ -1680,7 +1680,7 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw) * - initialize LED identification * - setup receive address registers * - setup flow control - * - setup transmit discriptors + * - setup transmit descriptors * - clear statistics **/ static s32 e1000_init_hw_ich8lan(struct e1000_hw *hw) @@ -1961,7 +1961,7 @@ static s32 e1000_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw) E1000_PHY_CTRL_NOND0A_GBE_DISABLE); ew32(PHY_CTRL, phy_ctrl); - /* Call gig speed drop workaround on Giga disable before accessing + /* Call gig speed drop workaround on Gig disable before accessing * any PHY registers */ e1000e_gig_downshift_workaround_ich8lan(hw); @@ -1972,7 +1972,7 @@ static s32 e1000_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw) /** * e1000_set_kmrn_lock_loss_workaound_ich8lan - Set Kumeran workaround state * @hw: pointer to the HW structure - * @state: boolean value used to set the current Kumaran workaround state + * @state: boolean value used to set the current Kumeran workaround state * * If ICH8, set the current Kumeran workaround state (enabled - TRUE * /disabled - FALSE). @@ -2017,7 +2017,7 @@ void e1000e_igp3_phy_powerdown_workaround_ich8lan(struct e1000_hw *hw) E1000_PHY_CTRL_NOND0A_GBE_DISABLE); ew32(PHY_CTRL, reg); - /* Call gig speed drop workaround on Giga disable before + /* Call gig speed drop workaround on Gig disable before * accessing any PHY registers */ if (hw->mac.type == e1000_ich8lan) e1000e_gig_downshift_workaround_ich8lan(hw); @@ -2045,7 +2045,7 @@ void e1000e_igp3_phy_powerdown_workaround_ich8lan(struct e1000_hw *hw) * @hw: pointer to the HW structure * * Steps to take when dropping from 1Gb/s (eg. link cable removal (LSC), - * LPLU, Giga disable, MDIC PHY reset): + * LPLU, Gig disable, MDIC PHY reset): * 1) Set Kumeran Near-end loopback * 2) Clear Kumeran Near-end loopback * Should only be called for ICH8[m] devices with IGP_3 Phy. @@ -2089,10 +2089,10 @@ static s32 e1000_cleanup_led_ich8lan(struct e1000_hw *hw) } /** - * e1000_led_on_ich8lan - Turn LED's on + * e1000_led_on_ich8lan - Turn LEDs on * @hw: pointer to the HW structure * - * Turn on the LED's. + * Turn on the LEDs. **/ static s32 e1000_led_on_ich8lan(struct e1000_hw *hw) { @@ -2105,10 +2105,10 @@ static s32 e1000_led_on_ich8lan(struct e1000_hw *hw) } /** - * e1000_led_off_ich8lan - Turn LED's off + * e1000_led_off_ich8lan - Turn LEDs off * @hw: pointer to the HW structure * - * Turn off the LED's. + * Turn off the LEDs. **/ static s32 e1000_led_off_ich8lan(struct e1000_hw *hw) { diff --git a/drivers/net/e1000e/lib.c b/drivers/net/e1000e/lib.c index 16f35fadb74b..95f75a43c9f9 100644 --- a/drivers/net/e1000e/lib.c +++ b/drivers/net/e1000e/lib.c @@ -589,9 +589,6 @@ static s32 e1000_set_default_fc_generic(struct e1000_hw *hw) s32 ret_val; u16 nvm_data; - if (mac->fc != e1000_fc_default) - return 0; - /* Read and store word 0x0F of the EEPROM. This word contains bits * that determine the hardware's default PAUSE (flow control) mode, * a bit that determines whether the HW defaults to enabling or @@ -1107,34 +1104,13 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw) (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) { mac->fc = e1000_fc_rx_pause; hw_dbg(hw, "Flow Control = RX PAUSE frames only.\r\n"); - } - /* Per the IEEE spec, at this point flow control should be - * disabled. However, we want to consider that we could - * be connected to a legacy switch that doesn't advertise - * desired flow control, but can be forced on the link - * partner. So if we advertised no flow control, that is - * what we will resolve to. If we advertised some kind of - * receive capability (Rx Pause Only or Full Flow Control) - * and the link partner advertised none, we will configure - * ourselves to enable Rx Flow Control only. We can do - * this safely for two reasons: If the link partner really - * didn't want flow control enabled, and we enable Rx, no - * harm done since we won't be receiving any PAUSE frames - * anyway. If the intent on the link partner was to have - * flow control enabled, then by us enabling RX only, we - * can at least receive pause frames and process them. - * This is a good idea because in most cases, since we are - * predominantly a server NIC, more times than not we will - * be asked to delay transmission of packets than asking - * our link partner to pause transmission of frames. - */ - else if ((mac->original_fc == e1000_fc_none) || - (mac->original_fc == e1000_fc_tx_pause)) { + } else { + /* + * Per the IEEE spec, at this point flow control + * should be disabled. + */ mac->fc = e1000_fc_none; hw_dbg(hw, "Flow Control = NONE.\r\n"); - } else { - mac->fc = e1000_fc_rx_pause; - hw_dbg(hw, "Flow Control = RX PAUSE frames only.\r\n"); } /* Now we need to do one last check... If we auto- @@ -1164,7 +1140,7 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw) } /** - * e1000e_get_speed_and_duplex_copper - Retreive current speed/duplex + * e1000e_get_speed_and_duplex_copper - Retrieve current speed/duplex * @hw: pointer to the HW structure * @speed: stores the current speed * @duplex: stores the current duplex @@ -1200,7 +1176,7 @@ s32 e1000e_get_speed_and_duplex_copper(struct e1000_hw *hw, u16 *speed, u16 *dup } /** - * e1000e_get_speed_and_duplex_fiber_serdes - Retreive current speed/duplex + * e1000e_get_speed_and_duplex_fiber_serdes - Retrieve current speed/duplex * @hw: pointer to the HW structure * @speed: stores the current speed * @duplex: stores the current duplex @@ -1410,7 +1386,7 @@ s32 e1000e_cleanup_led_generic(struct e1000_hw *hw) * e1000e_blink_led - Blink LED * @hw: pointer to the HW structure * - * Blink the led's which are set to be on. + * Blink the LEDs which are set to be on. **/ s32 e1000e_blink_led(struct e1000_hw *hw) { @@ -1515,7 +1491,7 @@ void e1000e_set_pcie_no_snoop(struct e1000_hw *hw, u32 no_snoop) * @hw: pointer to the HW structure * * Returns 0 if successful, else returns -10 - * (-E1000_ERR_MASTER_REQUESTS_PENDING) if master disable bit has not casued + * (-E1000_ERR_MASTER_REQUESTS_PENDING) if master disable bit has not caused * the master requests to be disabled. * * Disables PCI-Express master access and verifies there are no pending @@ -1876,7 +1852,7 @@ static s32 e1000_ready_nvm_eeprom(struct e1000_hw *hw) } /** - * e1000e_read_nvm_spi - Read EEPROM's using SPI + * e1000e_read_nvm_spi - Reads EEPROM using SPI * @hw: pointer to the HW structure * @offset: offset of word in the EEPROM to read * @words: number of words to read @@ -1980,7 +1956,7 @@ s32 e1000e_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) * Writes data to EEPROM at offset using SPI interface. * * If e1000e_update_nvm_checksum is not called after this function , the - * EEPROM will most likley contain an invalid checksum. + * EEPROM will most likely contain an invalid checksum. **/ s32 e1000e_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) { @@ -2222,7 +2198,7 @@ static u8 e1000_calculate_checksum(u8 *buffer, u32 length) * * Returns E1000_success upon success, else E1000_ERR_HOST_INTERFACE_COMMAND * - * This function checks whether the HOST IF is enabled for command operaton + * This function checks whether the HOST IF is enabled for command operation * and also checks whether the previous command is completed. It busy waits * in case of previous command is not completed. **/ @@ -2254,7 +2230,7 @@ static s32 e1000_mng_enable_host_if(struct e1000_hw *hw) } /** - * e1000e_check_mng_mode - check managament mode + * e1000e_check_mng_mode - check management mode * @hw: pointer to the HW structure * * Reads the firmware semaphore register and returns true (>0) if diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index 3031d6d16247..fc5c63f4f578 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -1006,7 +1006,7 @@ static void e1000_irq_enable(struct e1000_adapter *adapter) * e1000_get_hw_control - get control of the h/w from f/w * @adapter: address of board private structure * - * e1000_get_hw_control sets {CTRL_EXT|FWSM}:DRV_LOAD bit. + * e1000_get_hw_control sets {CTRL_EXT|SWSM}:DRV_LOAD bit. * For ASF and Pass Through versions of f/w this means that * the driver is loaded. For AMT version (only with 82573) * of the f/w this means that the network i/f is open. @@ -1032,7 +1032,7 @@ static void e1000_get_hw_control(struct e1000_adapter *adapter) * e1000_release_hw_control - release control of the h/w to f/w * @adapter: address of board private structure * - * e1000_release_hw_control resets {CTRL_EXT|FWSM}:DRV_LOAD bit. + * e1000_release_hw_control resets {CTRL_EXT|SWSM}:DRV_LOAD bit. * For ASF and Pass Through versions of f/w this means that the * driver is no longer loaded. For AMT version (only with 82573) i * of the f/w this means that the network i/f is closed. @@ -1241,6 +1241,11 @@ void e1000e_free_rx_resources(struct e1000_adapter *adapter) /** * e1000_update_itr - update the dynamic ITR value based on statistics + * @adapter: pointer to adapter + * @itr_setting: current adapter->itr + * @packets: the number of packets during this measurement interval + * @bytes: the number of bytes during this measurement interval + * * Stores a new ITR value based on packets and byte * counts during the last interrupt. The advantage of per interrupt * computation is faster updates and more accurate ITR for the current @@ -1250,10 +1255,6 @@ void e1000e_free_rx_resources(struct e1000_adapter *adapter) * while increasing bulk throughput. * this functionality is controlled by the InterruptThrottleRate module * parameter (see e1000_param.c) - * @adapter: pointer to adapter - * @itr_setting: current adapter->itr - * @packets: the number of packets during this measurement interval - * @bytes: the number of bytes during this measurement interval **/ static unsigned int e1000_update_itr(struct e1000_adapter *adapter, u16 itr_setting, int packets, @@ -1366,6 +1367,7 @@ set_itr_now: /** * e1000_clean - NAPI Rx polling callback * @adapter: board private structure + * @budget: amount of packets driver is allowed to process this poll **/ static int e1000_clean(struct napi_struct *napi, int budget) { @@ -2000,7 +2002,7 @@ static void e1000_power_down_phy(struct e1000_adapter *adapter) e1000_check_reset_block(hw)) return; - /* managebility (AMT) is enabled */ + /* manageability (AMT) is enabled */ if (er32(MANC) & E1000_MANC_SMBUS_EN) return; @@ -3488,7 +3490,6 @@ static int e1000_suspend(struct pci_dev *pdev, pm_message_t state) static void e1000e_disable_l1aspm(struct pci_dev *pdev) { int pos; - u32 cap; u16 val; /* @@ -3503,7 +3504,6 @@ static void e1000e_disable_l1aspm(struct pci_dev *pdev) * active. */ pos = pci_find_capability(pdev, PCI_CAP_ID_EXP); - pci_read_config_dword(pdev, pos + PCI_EXP_LNKCAP, &cap); pci_read_config_word(pdev, pos + PCI_EXP_LNKCTL, &val); if (val & 0x2) { dev_warn(&pdev->dev, "Disabling L1 ASPM\n"); diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c index fc6fee112f1c..dab3c468a768 100644 --- a/drivers/net/e1000e/phy.c +++ b/drivers/net/e1000e/phy.c @@ -121,7 +121,7 @@ s32 e1000e_phy_reset_dsp(struct e1000_hw *hw) * @offset: register offset to be read * @data: pointer to the read data * - * Reads the MDI control regsiter in the PHY at offset and stores the + * Reads the MDI control register in the PHY at offset and stores the * information read to data. **/ static s32 e1000_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data) @@ -1172,7 +1172,7 @@ s32 e1000e_set_d3_lplu_state(struct e1000_hw *hw, bool active) } /** - * e1000e_check_downshift - Checks whether a downshift in speed occured + * e1000e_check_downshift - Checks whether a downshift in speed occurred * @hw: pointer to the HW structure * * Success returns 0, Failure returns 1 @@ -1388,8 +1388,8 @@ s32 e1000e_get_cable_length_m88(struct e1000_hw *hw) * * The automatic gain control (agc) normalizes the amplitude of the * received signal, adjusting for the attenuation produced by the - * cable. By reading the AGC registers, which reperesent the - * cobination of course and fine gain value, the value can be put + * cable. By reading the AGC registers, which represent the + * combination of course and fine gain value, the value can be put * into a lookup table to obtain the approximate cable length * for each channel. **/ @@ -1619,7 +1619,7 @@ s32 e1000e_phy_sw_reset(struct e1000_hw *hw) * Verify the reset block is not blocking us from resetting. Acquire * semaphore (if necessary) and read/set/write the device control reset * bit in the PHY. Wait the appropriate delay time for the device to - * reset and relase the semaphore (if necessary). + * reset and release the semaphore (if necessary). **/ s32 e1000e_phy_hw_reset_generic(struct e1000_hw *hw) { diff --git a/drivers/net/ehea/ehea.h b/drivers/net/ehea/ehea.h index 88fb53eba715..7c4ead35cfa2 100644 --- a/drivers/net/ehea/ehea.h +++ b/drivers/net/ehea/ehea.h @@ -40,7 +40,7 @@ #include <asm/io.h> #define DRV_NAME "ehea" -#define DRV_VERSION "EHEA_0083" +#define DRV_VERSION "EHEA_0087" /* eHEA capability flags */ #define DLPAR_PORT_ADD_REM 1 @@ -386,6 +386,13 @@ struct ehea_port_res { #define EHEA_MAX_PORTS 16 + +#define EHEA_NUM_PORTRES_FW_HANDLES 6 /* QP handle, SendCQ handle, + RecvCQ handle, EQ handle, + SendMR handle, RecvMR handle */ +#define EHEA_NUM_PORT_FW_HANDLES 1 /* EQ handle */ +#define EHEA_NUM_ADAPTER_FW_HANDLES 2 /* MR handle, NEQ handle */ + struct ehea_adapter { u64 handle; struct of_device *ofdev; @@ -405,6 +412,31 @@ struct ehea_mc_list { u64 macaddr; }; +/* kdump support */ +struct ehea_fw_handle_entry { + u64 adh; /* Adapter Handle */ + u64 fwh; /* Firmware Handle */ +}; + +struct ehea_fw_handle_array { + struct ehea_fw_handle_entry *arr; + int num_entries; + struct semaphore lock; +}; + +struct ehea_bcmc_reg_entry { + u64 adh; /* Adapter Handle */ + u32 port_id; /* Logical Port Id */ + u8 reg_type; /* Registration Type */ + u64 macaddr; +}; + +struct ehea_bcmc_reg_array { + struct ehea_bcmc_reg_entry *arr; + int num_entries; + struct semaphore lock; +}; + #define EHEA_PORT_UP 1 #define EHEA_PORT_DOWN 0 #define EHEA_PHY_LINK_UP 1 diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c index c051c7e09b9a..21af674b764e 100644 --- a/drivers/net/ehea/ehea_main.c +++ b/drivers/net/ehea/ehea_main.c @@ -35,6 +35,7 @@ #include <linux/if_ether.h> #include <linux/notifier.h> #include <linux/reboot.h> +#include <asm/kexec.h> #include <net/ip.h> @@ -98,8 +99,10 @@ static int port_name_cnt; static LIST_HEAD(adapter_list); u64 ehea_driver_flags; struct work_struct ehea_rereg_mr_task; - struct semaphore dlpar_mem_lock; +struct ehea_fw_handle_array ehea_fw_handles; +struct ehea_bcmc_reg_array ehea_bcmc_regs; + static int __devinit ehea_probe_adapter(struct of_device *dev, const struct of_device_id *id); @@ -132,6 +135,160 @@ void ehea_dump(void *adr, int len, char *msg) } } +static void ehea_update_firmware_handles(void) +{ + struct ehea_fw_handle_entry *arr = NULL; + struct ehea_adapter *adapter; + int num_adapters = 0; + int num_ports = 0; + int num_portres = 0; + int i = 0; + int num_fw_handles, k, l; + + /* Determine number of handles */ + list_for_each_entry(adapter, &adapter_list, list) { + num_adapters++; + + for (k = 0; k < EHEA_MAX_PORTS; k++) { + struct ehea_port *port = adapter->port[k]; + + if (!port || (port->state != EHEA_PORT_UP)) + continue; + + num_ports++; + num_portres += port->num_def_qps + port->num_add_tx_qps; + } + } + + num_fw_handles = num_adapters * EHEA_NUM_ADAPTER_FW_HANDLES + + num_ports * EHEA_NUM_PORT_FW_HANDLES + + num_portres * EHEA_NUM_PORTRES_FW_HANDLES; + + if (num_fw_handles) { + arr = kzalloc(num_fw_handles * sizeof(*arr), GFP_KERNEL); + if (!arr) + return; /* Keep the existing array */ + } else + goto out_update; + + list_for_each_entry(adapter, &adapter_list, list) { + for (k = 0; k < EHEA_MAX_PORTS; k++) { + struct ehea_port *port = adapter->port[k]; + + if (!port || (port->state != EHEA_PORT_UP)) + continue; + + for (l = 0; + l < port->num_def_qps + port->num_add_tx_qps; + l++) { + struct ehea_port_res *pr = &port->port_res[l]; + + arr[i].adh = adapter->handle; + arr[i++].fwh = pr->qp->fw_handle; + arr[i].adh = adapter->handle; + arr[i++].fwh = pr->send_cq->fw_handle; + arr[i].adh = adapter->handle; + arr[i++].fwh = pr->recv_cq->fw_handle; + arr[i].adh = adapter->handle; + arr[i++].fwh = pr->eq->fw_handle; + arr[i].adh = adapter->handle; + arr[i++].fwh = pr->send_mr.handle; + arr[i].adh = adapter->handle; + arr[i++].fwh = pr->recv_mr.handle; + } + arr[i].adh = adapter->handle; + arr[i++].fwh = port->qp_eq->fw_handle; + } + + arr[i].adh = adapter->handle; + arr[i++].fwh = adapter->neq->fw_handle; + + if (adapter->mr.handle) { + arr[i].adh = adapter->handle; + arr[i++].fwh = adapter->mr.handle; + } + } + +out_update: + kfree(ehea_fw_handles.arr); + ehea_fw_handles.arr = arr; + ehea_fw_handles.num_entries = i; +} + +static void ehea_update_bcmc_registrations(void) +{ + struct ehea_bcmc_reg_entry *arr = NULL; + struct ehea_adapter *adapter; + struct ehea_mc_list *mc_entry; + int num_registrations = 0; + int i = 0; + int k; + + /* Determine number of registrations */ + list_for_each_entry(adapter, &adapter_list, list) + for (k = 0; k < EHEA_MAX_PORTS; k++) { + struct ehea_port *port = adapter->port[k]; + + if (!port || (port->state != EHEA_PORT_UP)) + continue; + + num_registrations += 2; /* Broadcast registrations */ + + list_for_each_entry(mc_entry, &port->mc_list->list,list) + num_registrations += 2; + } + + if (num_registrations) { + arr = kzalloc(num_registrations * sizeof(*arr), GFP_KERNEL); + if (!arr) + return; /* Keep the existing array */ + } else + goto out_update; + + list_for_each_entry(adapter, &adapter_list, list) { + for (k = 0; k < EHEA_MAX_PORTS; k++) { + struct ehea_port *port = adapter->port[k]; + + if (!port || (port->state != EHEA_PORT_UP)) + continue; + + arr[i].adh = adapter->handle; + arr[i].port_id = port->logical_port_id; + arr[i].reg_type = EHEA_BCMC_BROADCAST | + EHEA_BCMC_UNTAGGED; + arr[i++].macaddr = port->mac_addr; + + arr[i].adh = adapter->handle; + arr[i].port_id = port->logical_port_id; + arr[i].reg_type = EHEA_BCMC_BROADCAST | + EHEA_BCMC_VLANID_ALL; + arr[i++].macaddr = port->mac_addr; + + list_for_each_entry(mc_entry, + &port->mc_list->list, list) { + arr[i].adh = adapter->handle; + arr[i].port_id = port->logical_port_id; + arr[i].reg_type = EHEA_BCMC_SCOPE_ALL | + EHEA_BCMC_MULTICAST | + EHEA_BCMC_UNTAGGED; + arr[i++].macaddr = mc_entry->macaddr; + + arr[i].adh = adapter->handle; + arr[i].port_id = port->logical_port_id; + arr[i].reg_type = EHEA_BCMC_SCOPE_ALL | + EHEA_BCMC_MULTICAST | + EHEA_BCMC_VLANID_ALL; + arr[i++].macaddr = mc_entry->macaddr; + } + } + } + +out_update: + kfree(ehea_bcmc_regs.arr); + ehea_bcmc_regs.arr = arr; + ehea_bcmc_regs.num_entries = i; +} + static struct net_device_stats *ehea_get_stats(struct net_device *dev) { struct ehea_port *port = netdev_priv(dev); @@ -1601,19 +1758,25 @@ static int ehea_set_mac_addr(struct net_device *dev, void *sa) memcpy(dev->dev_addr, mac_addr->sa_data, dev->addr_len); + down(&ehea_bcmc_regs.lock); + /* Deregister old MAC in pHYP */ ret = ehea_broadcast_reg_helper(port, H_DEREG_BCMC); if (ret) - goto out_free; + goto out_upregs; port->mac_addr = cb0->port_mac_addr << 16; /* Register new MAC in pHYP */ ret = ehea_broadcast_reg_helper(port, H_REG_BCMC); if (ret) - goto out_free; + goto out_upregs; ret = 0; + +out_upregs: + ehea_update_bcmc_registrations(); + up(&ehea_bcmc_regs.lock); out_free: kfree(cb0); out: @@ -1775,9 +1938,11 @@ static void ehea_set_multicast_list(struct net_device *dev) } ehea_promiscuous(dev, 0); + down(&ehea_bcmc_regs.lock); + if (dev->flags & IFF_ALLMULTI) { ehea_allmulti(dev, 1); - return; + goto out; } ehea_allmulti(dev, 0); @@ -1803,6 +1968,8 @@ static void ehea_set_multicast_list(struct net_device *dev) } out: + ehea_update_bcmc_registrations(); + up(&ehea_bcmc_regs.lock); return; } @@ -2285,6 +2452,8 @@ static int ehea_up(struct net_device *dev) if (port->state == EHEA_PORT_UP) return 0; + down(&ehea_fw_handles.lock); + ret = ehea_port_res_setup(port, port->num_def_qps, port->num_add_tx_qps); if (ret) { @@ -2321,8 +2490,17 @@ static int ehea_up(struct net_device *dev) } } - ret = 0; + down(&ehea_bcmc_regs.lock); + + ret = ehea_broadcast_reg_helper(port, H_REG_BCMC); + if (ret) { + ret = -EIO; + goto out_free_irqs; + } + port->state = EHEA_PORT_UP; + + ret = 0; goto out; out_free_irqs: @@ -2334,6 +2512,12 @@ out: if (ret) ehea_info("Failed starting %s. ret=%i", dev->name, ret); + ehea_update_bcmc_registrations(); + up(&ehea_bcmc_regs.lock); + + ehea_update_firmware_handles(); + up(&ehea_fw_handles.lock); + return ret; } @@ -2382,16 +2566,27 @@ static int ehea_down(struct net_device *dev) if (port->state == EHEA_PORT_DOWN) return 0; + down(&ehea_bcmc_regs.lock); ehea_drop_multicast_list(dev); + ehea_broadcast_reg_helper(port, H_DEREG_BCMC); + ehea_free_interrupts(dev); + down(&ehea_fw_handles.lock); + port->state = EHEA_PORT_DOWN; + ehea_update_bcmc_registrations(); + up(&ehea_bcmc_regs.lock); + ret = ehea_clean_all_portres(port); if (ret) ehea_info("Failed freeing resources for %s. ret=%i", dev->name, ret); + ehea_update_firmware_handles(); + up(&ehea_fw_handles.lock); + return ret; } @@ -2920,19 +3115,12 @@ struct ehea_port *ehea_setup_single_port(struct ehea_adapter *adapter, dev->watchdog_timeo = EHEA_WATCH_DOG_TIMEOUT; INIT_WORK(&port->reset_task, ehea_reset_port); - - ret = ehea_broadcast_reg_helper(port, H_REG_BCMC); - if (ret) { - ret = -EIO; - goto out_unreg_port; - } - ehea_set_ethtool_ops(dev); ret = register_netdev(dev); if (ret) { ehea_error("register_netdev failed. ret=%d", ret); - goto out_dereg_bc; + goto out_unreg_port; } port->lro_max_aggr = lro_max_aggr; @@ -2949,9 +3137,6 @@ struct ehea_port *ehea_setup_single_port(struct ehea_adapter *adapter, return port; -out_dereg_bc: - ehea_broadcast_reg_helper(port, H_DEREG_BCMC); - out_unreg_port: ehea_unregister_port(port); @@ -2971,7 +3156,6 @@ static void ehea_shutdown_single_port(struct ehea_port *port) { unregister_netdev(port->netdev); ehea_unregister_port(port); - ehea_broadcast_reg_helper(port, H_DEREG_BCMC); kfree(port->mc_list); free_netdev(port->netdev); port->adapter->active_ports--; @@ -3014,7 +3198,6 @@ static int ehea_setup_ports(struct ehea_adapter *adapter) i++; }; - return 0; } @@ -3159,6 +3342,7 @@ static int __devinit ehea_probe_adapter(struct of_device *dev, ehea_error("Invalid ibmebus device probed"); return -EINVAL; } + down(&ehea_fw_handles.lock); adapter = kzalloc(sizeof(*adapter), GFP_KERNEL); if (!adapter) { @@ -3239,7 +3423,10 @@ out_kill_eq: out_free_ad: kfree(adapter); + out: + ehea_update_firmware_handles(); + up(&ehea_fw_handles.lock); return ret; } @@ -3258,18 +3445,41 @@ static int __devexit ehea_remove(struct of_device *dev) flush_scheduled_work(); + down(&ehea_fw_handles.lock); + ibmebus_free_irq(adapter->neq->attr.ist1, adapter); tasklet_kill(&adapter->neq_tasklet); ehea_destroy_eq(adapter->neq); ehea_remove_adapter_mr(adapter); list_del(&adapter->list); - kfree(adapter); + ehea_update_firmware_handles(); + up(&ehea_fw_handles.lock); + return 0; } +void ehea_crash_handler(void) +{ + int i; + + if (ehea_fw_handles.arr) + for (i = 0; i < ehea_fw_handles.num_entries; i++) + ehea_h_free_resource(ehea_fw_handles.arr[i].adh, + ehea_fw_handles.arr[i].fwh, + FORCE_FREE); + + if (ehea_bcmc_regs.arr) + for (i = 0; i < ehea_bcmc_regs.num_entries; i++) + ehea_h_reg_dereg_bcmc(ehea_bcmc_regs.arr[i].adh, + ehea_bcmc_regs.arr[i].port_id, + ehea_bcmc_regs.arr[i].reg_type, + ehea_bcmc_regs.arr[i].macaddr, + 0, H_DEREG_BCMC); +} + static int ehea_reboot_notifier(struct notifier_block *nb, unsigned long action, void *unused) { @@ -3330,7 +3540,12 @@ int __init ehea_module_init(void) INIT_WORK(&ehea_rereg_mr_task, ehea_rereg_mrs); + memset(&ehea_fw_handles, 0, sizeof(ehea_fw_handles)); + memset(&ehea_bcmc_regs, 0, sizeof(ehea_bcmc_regs)); + sema_init(&dlpar_mem_lock, 1); + sema_init(&ehea_fw_handles.lock, 1); + sema_init(&ehea_bcmc_regs.lock, 1); ret = check_module_parm(); if (ret) @@ -3340,12 +3555,18 @@ int __init ehea_module_init(void) if (ret) goto out; - register_reboot_notifier(&ehea_reboot_nb); + ret = register_reboot_notifier(&ehea_reboot_nb); + if (ret) + ehea_info("failed registering reboot notifier"); + + ret = crash_shutdown_register(&ehea_crash_handler); + if (ret) + ehea_info("failed registering crash handler"); ret = ibmebus_register_driver(&ehea_driver); if (ret) { ehea_error("failed registering eHEA device driver on ebus"); - goto out; + goto out2; } ret = driver_create_file(&ehea_driver.driver, @@ -3353,21 +3574,33 @@ int __init ehea_module_init(void) if (ret) { ehea_error("failed to register capabilities attribute, ret=%d", ret); - unregister_reboot_notifier(&ehea_reboot_nb); - ibmebus_unregister_driver(&ehea_driver); - goto out; + goto out3; } + return ret; + +out3: + ibmebus_unregister_driver(&ehea_driver); +out2: + unregister_reboot_notifier(&ehea_reboot_nb); + crash_shutdown_unregister(&ehea_crash_handler); out: return ret; } static void __exit ehea_module_exit(void) { + int ret; + flush_scheduled_work(); driver_remove_file(&ehea_driver.driver, &driver_attr_capabilities); ibmebus_unregister_driver(&ehea_driver); unregister_reboot_notifier(&ehea_reboot_nb); + ret = crash_shutdown_unregister(&ehea_crash_handler); + if (ret) + ehea_info("failed unregistering crash handler"); + kfree(ehea_fw_handles.arr); + kfree(ehea_bcmc_regs.arr); ehea_destroy_busmap(); } diff --git a/drivers/net/enc28j60.c b/drivers/net/enc28j60.c index 0809a6a5a286..46a90e9ec563 100644 --- a/drivers/net/enc28j60.c +++ b/drivers/net/enc28j60.c @@ -900,7 +900,7 @@ static void enc28j60_hw_rx(struct net_device *ndev) if (RSV_GETBIT(rxstat, RSV_LENCHECKERR)) ndev->stats.rx_frame_errors++; } else { - skb = dev_alloc_skb(len); + skb = dev_alloc_skb(len + NET_IP_ALIGN); if (!skb) { if (netif_msg_rx_err(priv)) dev_err(&ndev->dev, @@ -908,6 +908,7 @@ static void enc28j60_hw_rx(struct net_device *ndev) ndev->stats.rx_dropped++; } else { skb->dev = ndev; + skb_reserve(skb, NET_IP_ALIGN); /* copy the packet from the receive buffer */ enc28j60_mem_read(priv, priv->next_pk_ptr + sizeof(rsv), len, skb_put(skb, len)); diff --git a/drivers/net/fec.c b/drivers/net/fec.c index 0fbf1bbbaee9..d7a3ea88eddb 100644 --- a/drivers/net/fec.c +++ b/drivers/net/fec.c @@ -1253,7 +1253,7 @@ static void __inline__ fec_request_intrs(struct net_device *dev) /* Setup interrupt handlers. */ for (idp = id; idp->name; idp++) { - if (request_irq(idp->irq, idp->handler, 0, idp->name, dev) != 0) + if (request_irq(idp->irq, idp->handler, IRQF_DISABLED, idp->name, dev) != 0) printk("FEC: Could not allocate %s IRQ(%d)!\n", idp->name, idp->irq); } @@ -1382,7 +1382,7 @@ static void __inline__ fec_request_intrs(struct net_device *dev) /* Setup interrupt handlers. */ for (idp = id; idp->name; idp++) { - if (request_irq(b+idp->irq, fec_enet_interrupt, 0, idp->name, dev) != 0) + if (request_irq(b+idp->irq, fec_enet_interrupt, IRQF_DISABLED, idp->name, dev) != 0) printk("FEC: Could not allocate %s IRQ(%d)!\n", idp->name, b+idp->irq); } @@ -1553,7 +1553,7 @@ static void __inline__ fec_request_intrs(struct net_device *dev) /* Setup interrupt handlers. */ for (idp = id; idp->name; idp++) { - if (request_irq(b+idp->irq,fec_enet_interrupt,0,idp->name,dev)!=0) + if (request_irq(b+idp->irq, fec_enet_interrupt, IRQF_DISABLED, idp->name,dev) != 0) printk("FEC: Could not allocate %s IRQ(%d)!\n", idp->name, b+idp->irq); } @@ -1680,7 +1680,7 @@ static void __inline__ fec_request_intrs(struct net_device *dev) /* Setup interrupt handlers. */ for (idp = id; idp->name; idp++) { - if (request_irq(b+idp->irq,fec_enet_interrupt,0,idp->name,dev)!=0) + if (request_irq(b+idp->irq, fec_enet_interrupt, IRQF_DISABLED, idp->name,dev) != 0) printk("FEC: Could not allocate %s IRQ(%d)!\n", idp->name, b+idp->irq); } diff --git a/drivers/net/fs_enet/fs_enet-main.c b/drivers/net/fs_enet/fs_enet-main.c index 42d94edeee26..af869cf9ae7d 100644 --- a/drivers/net/fs_enet/fs_enet-main.c +++ b/drivers/net/fs_enet/fs_enet-main.c @@ -946,16 +946,11 @@ static int fs_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) { struct fs_enet_private *fep = netdev_priv(dev); struct mii_ioctl_data *mii = (struct mii_ioctl_data *)&rq->ifr_data; - unsigned long flags; - int rc; if (!netif_running(dev)) return -EINVAL; - spin_lock_irqsave(&fep->lock, flags); - rc = phy_mii_ioctl(fep->phydev, mii, cmd); - spin_unlock_irqrestore(&fep->lock, flags); - return rc; + return phy_mii_ioctl(fep->phydev, mii, cmd); } extern int fs_mii_connect(struct net_device *dev); diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c index 4244fc282f21..718cf77e345a 100644 --- a/drivers/net/gianfar.c +++ b/drivers/net/gianfar.c @@ -605,7 +605,7 @@ void stop_gfar(struct net_device *dev) free_skb_resources(priv); - dma_free_coherent(NULL, + dma_free_coherent(&dev->dev, sizeof(struct txbd8)*priv->tx_ring_size + sizeof(struct rxbd8)*priv->rx_ring_size, priv->tx_bd_base, @@ -626,7 +626,7 @@ static void free_skb_resources(struct gfar_private *priv) for (i = 0; i < priv->tx_ring_size; i++) { if (priv->tx_skbuff[i]) { - dma_unmap_single(NULL, txbdp->bufPtr, + dma_unmap_single(&priv->dev->dev, txbdp->bufPtr, txbdp->length, DMA_TO_DEVICE); dev_kfree_skb_any(priv->tx_skbuff[i]); @@ -643,7 +643,7 @@ static void free_skb_resources(struct gfar_private *priv) if(priv->rx_skbuff != NULL) { for (i = 0; i < priv->rx_ring_size; i++) { if (priv->rx_skbuff[i]) { - dma_unmap_single(NULL, rxbdp->bufPtr, + dma_unmap_single(&priv->dev->dev, rxbdp->bufPtr, priv->rx_buffer_size, DMA_FROM_DEVICE); @@ -708,7 +708,7 @@ int startup_gfar(struct net_device *dev) gfar_write(®s->imask, IMASK_INIT_CLEAR); /* Allocate memory for the buffer descriptors */ - vaddr = (unsigned long) dma_alloc_coherent(NULL, + vaddr = (unsigned long) dma_alloc_coherent(&dev->dev, sizeof (struct txbd8) * priv->tx_ring_size + sizeof (struct rxbd8) * priv->rx_ring_size, &addr, GFP_KERNEL); @@ -919,7 +919,7 @@ err_irq_fail: rx_skb_fail: free_skb_resources(priv); tx_skb_fail: - dma_free_coherent(NULL, + dma_free_coherent(&dev->dev, sizeof(struct txbd8)*priv->tx_ring_size + sizeof(struct rxbd8)*priv->rx_ring_size, priv->tx_bd_base, @@ -1053,7 +1053,7 @@ static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev) /* Set buffer length and pointer */ txbdp->length = skb->len; - txbdp->bufPtr = dma_map_single(NULL, skb->data, + txbdp->bufPtr = dma_map_single(&dev->dev, skb->data, skb->len, DMA_TO_DEVICE); /* Save the skb pointer so we can free it later */ @@ -1332,7 +1332,7 @@ struct sk_buff * gfar_new_skb(struct net_device *dev, struct rxbd8 *bdp) */ skb_reserve(skb, alignamount); - bdp->bufPtr = dma_map_single(NULL, skb->data, + bdp->bufPtr = dma_map_single(&dev->dev, skb->data, priv->rx_buffer_size, DMA_FROM_DEVICE); bdp->length = 0; diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c index bff280eff5e3..6a1f23092099 100644 --- a/drivers/net/igb/igb_main.c +++ b/drivers/net/igb/igb_main.c @@ -439,7 +439,7 @@ static int igb_request_irq(struct igb_adapter *adapter) err = igb_request_msix(adapter); if (!err) { /* enable IAM, auto-mask, - * DO NOT USE EIAME or IAME in legacy mode */ + * DO NOT USE EIAM or IAM in legacy mode */ wr32(E1000_IAM, IMS_ENABLE_MASK); goto request_done; } @@ -465,14 +465,9 @@ static int igb_request_irq(struct igb_adapter *adapter) err = request_irq(adapter->pdev->irq, &igb_intr, IRQF_SHARED, netdev->name, netdev); - if (err) { + if (err) dev_err(&adapter->pdev->dev, "Error %d getting interrupt\n", err); - goto request_done; - } - - /* enable IAM, auto-mask */ - wr32(E1000_IAM, IMS_ENABLE_MASK); request_done: return err; @@ -821,7 +816,8 @@ void igb_reset(struct igb_adapter *adapter) wr32(E1000_VET, ETHERNET_IEEE_VLAN_TYPE); igb_reset_adaptive(&adapter->hw); - adapter->hw.phy.ops.get_phy_info(&adapter->hw); + if (adapter->hw.phy.ops.get_phy_info) + adapter->hw.phy.ops.get_phy_info(&adapter->hw); } /** @@ -2057,7 +2053,8 @@ static void igb_set_multi(struct net_device *netdev) static void igb_update_phy_info(unsigned long data) { struct igb_adapter *adapter = (struct igb_adapter *) data; - adapter->hw.phy.ops.get_phy_info(&adapter->hw); + if (adapter->hw.phy.ops.get_phy_info) + adapter->hw.phy.ops.get_phy_info(&adapter->hw); } /** diff --git a/drivers/net/ixgb/ixgb_ethtool.c b/drivers/net/ixgb/ixgb_ethtool.c index 53a9fd086f96..75f3a68ee354 100644 --- a/drivers/net/ixgb/ixgb_ethtool.c +++ b/drivers/net/ixgb/ixgb_ethtool.c @@ -67,6 +67,7 @@ static struct ixgb_stats ixgb_gstrings_stats[] = { {"rx_over_errors", IXGB_STAT(net_stats.rx_over_errors)}, {"rx_crc_errors", IXGB_STAT(net_stats.rx_crc_errors)}, {"rx_frame_errors", IXGB_STAT(net_stats.rx_frame_errors)}, + {"rx_no_buffer_count", IXGB_STAT(stats.rnbc)}, {"rx_fifo_errors", IXGB_STAT(net_stats.rx_fifo_errors)}, {"rx_missed_errors", IXGB_STAT(net_stats.rx_missed_errors)}, {"tx_aborted_errors", IXGB_STAT(net_stats.tx_aborted_errors)}, diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index 23d0a4afe0e1..c2095ce531c9 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -2133,7 +2133,7 @@ static void ixgbe_watchdog(unsigned long data) (link_speed == IXGBE_LINK_SPEED_10GB_FULL ? "10 Gbps" : (link_speed == IXGBE_LINK_SPEED_1GB_FULL ? - "1 Gpbs" : "unknown speed")), + "1 Gbps" : "unknown speed")), ((FLOW_RX && FLOW_TX) ? "RX/TX" : (FLOW_RX ? "RX" : (FLOW_TX ? "TX" : "None")))); diff --git a/drivers/net/macb.c b/drivers/net/macb.c index 81bf005ff280..1d210ed46130 100644 --- a/drivers/net/macb.c +++ b/drivers/net/macb.c @@ -148,7 +148,7 @@ static void macb_handle_link_change(struct net_device *dev) if (phydev->duplex) reg |= MACB_BIT(FD); - if (phydev->speed) + if (phydev->speed == SPEED_100) reg |= MACB_BIT(SPD); macb_writel(bp, NCFGR, reg); diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c index b528ce77c406..771139e283af 100644 --- a/drivers/net/mv643xx_eth.c +++ b/drivers/net/mv643xx_eth.c @@ -2104,6 +2104,7 @@ MODULE_LICENSE("GPL"); MODULE_AUTHOR( "Rabeeh Khoury, Assaf Hoffman, Matthew Dharm, Manish Lachwani" " and Dale Farnsworth"); MODULE_DESCRIPTION("Ethernet driver for Marvell MV643XX"); +MODULE_ALIAS("platform:mv643xx_eth"); /* * The second part is the low level driver of the gigE ethernet ports. diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c index e8a63e483a2b..ce95c5d168fe 100644 --- a/drivers/net/pcmcia/axnet_cs.c +++ b/drivers/net/pcmcia/axnet_cs.c @@ -1268,7 +1268,7 @@ static irqreturn_t ax_interrupt(int irq, void *dev_id) } } - if (interrupts && ei_debug) + if (interrupts && ei_debug > 3) { handled = 1; if (nr_serviced >= MAX_SERVICE) diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c index 6323988dfa1d..fd8158a86f64 100644 --- a/drivers/net/pcmcia/pcnet_cs.c +++ b/drivers/net/pcmcia/pcnet_cs.c @@ -590,6 +590,13 @@ static int pcnet_config(struct pcmcia_device *link) dev->if_port = 0; } + if ((link->conf.ConfigBase == 0x03c0) + && (link->manf_id == 0x149) && (link->card_id = 0xc1ab)) { + printk(KERN_INFO "pcnet_cs: this is an AX88190 card!\n"); + printk(KERN_INFO "pcnet_cs: use axnet_cs instead.\n"); + goto failed; + } + local_hw_info = get_hwinfo(link); if (local_hw_info == NULL) local_hw_info = get_prom(link); @@ -1567,12 +1574,11 @@ static struct pcmcia_device_id pcnet_ids[] = { PCMCIA_DEVICE_MANF_CARD(0x0104, 0x0145), PCMCIA_DEVICE_MANF_CARD(0x0149, 0x0230), PCMCIA_DEVICE_MANF_CARD(0x0149, 0x4530), -/* PCMCIA_DEVICE_MANF_CARD(0x0149, 0xc1ab), conflict with axnet_cs */ + PCMCIA_DEVICE_MANF_CARD(0x0149, 0xc1ab), PCMCIA_DEVICE_MANF_CARD(0x0186, 0x0110), PCMCIA_DEVICE_MANF_CARD(0x01bf, 0x2328), PCMCIA_DEVICE_MANF_CARD(0x01bf, 0x8041), PCMCIA_DEVICE_MANF_CARD(0x0213, 0x2452), -/* PCMCIA_DEVICE_MANF_CARD(0x021b, 0x0202), conflict with axnet_cs */ PCMCIA_DEVICE_MANF_CARD(0x026f, 0x0300), PCMCIA_DEVICE_MANF_CARD(0x026f, 0x0307), PCMCIA_DEVICE_MANF_CARD(0x026f, 0x030a), diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index f4ca0591231d..3ac8529bb92c 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -67,6 +67,7 @@ config REALTEK_PHY config FIXED_PHY bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs" + depends on PHYLIB=y ---help--- Adds the platform "fixed" MDIO Bus to cover the boards that use PHYs that are not connected to the real MDIO bus. diff --git a/drivers/net/phy/davicom.c b/drivers/net/phy/davicom.c index 7ed632db00d7..d926168bc780 100644 --- a/drivers/net/phy/davicom.c +++ b/drivers/net/phy/davicom.c @@ -37,6 +37,7 @@ #define MII_DM9161_SCR 0x10 #define MII_DM9161_SCR_INIT 0x0610 +#define MII_DM9161_SCR_RMII 0x0100 /* DM9161 Interrupt Register */ #define MII_DM9161_INTR 0x15 @@ -103,7 +104,7 @@ static int dm9161_config_aneg(struct phy_device *phydev) static int dm9161_config_init(struct phy_device *phydev) { - int err; + int err, temp; /* Isolate the PHY */ err = phy_write(phydev, MII_BMCR, BMCR_ISOLATE); @@ -111,9 +112,19 @@ static int dm9161_config_init(struct phy_device *phydev) if (err < 0) return err; - /* Do not bypass the scrambler/descrambler */ - err = phy_write(phydev, MII_DM9161_SCR, MII_DM9161_SCR_INIT); + switch (phydev->interface) { + case PHY_INTERFACE_MODE_MII: + temp = MII_DM9161_SCR_INIT; + break; + case PHY_INTERFACE_MODE_RMII: + temp = MII_DM9161_SCR_INIT | MII_DM9161_SCR_RMII; + break; + default: + return -EINVAL; + } + /* Do not bypass the scrambler/descrambler */ + err = phy_write(phydev, MII_DM9161_SCR, temp); if (err < 0) return err; diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c index 6e9f619c491f..963630c65ca9 100644 --- a/drivers/net/phy/mdio_bus.c +++ b/drivers/net/phy/mdio_bus.c @@ -49,13 +49,13 @@ int mdiobus_register(struct mii_bus *bus) int i; int err = 0; - mutex_init(&bus->mdio_lock); - if (NULL == bus || NULL == bus->name || NULL == bus->read || NULL == bus->write) return -EINVAL; + mutex_init(&bus->mdio_lock); + if (bus->reset) bus->reset(bus); diff --git a/drivers/net/pppol2tp.c b/drivers/net/pppol2tp.c index e0b072d9fdb7..3d10ca050b79 100644 --- a/drivers/net/pppol2tp.c +++ b/drivers/net/pppol2tp.c @@ -302,14 +302,14 @@ pppol2tp_session_find(struct pppol2tp_tunnel *tunnel, u16 session_id) struct pppol2tp_session *session; struct hlist_node *walk; - read_lock(&tunnel->hlist_lock); + read_lock_bh(&tunnel->hlist_lock); hlist_for_each_entry(session, walk, session_list, hlist) { if (session->tunnel_addr.s_session == session_id) { - read_unlock(&tunnel->hlist_lock); + read_unlock_bh(&tunnel->hlist_lock); return session; } } - read_unlock(&tunnel->hlist_lock); + read_unlock_bh(&tunnel->hlist_lock); return NULL; } @@ -320,14 +320,14 @@ static struct pppol2tp_tunnel *pppol2tp_tunnel_find(u16 tunnel_id) { struct pppol2tp_tunnel *tunnel = NULL; - read_lock(&pppol2tp_tunnel_list_lock); + read_lock_bh(&pppol2tp_tunnel_list_lock); list_for_each_entry(tunnel, &pppol2tp_tunnel_list, list) { if (tunnel->stats.tunnel_id == tunnel_id) { - read_unlock(&pppol2tp_tunnel_list_lock); + read_unlock_bh(&pppol2tp_tunnel_list_lock); return tunnel; } } - read_unlock(&pppol2tp_tunnel_list_lock); + read_unlock_bh(&pppol2tp_tunnel_list_lock); return NULL; } @@ -342,10 +342,11 @@ static struct pppol2tp_tunnel *pppol2tp_tunnel_find(u16 tunnel_id) static void pppol2tp_recv_queue_skb(struct pppol2tp_session *session, struct sk_buff *skb) { struct sk_buff *skbp; + struct sk_buff *tmp; u16 ns = PPPOL2TP_SKB_CB(skb)->ns; - spin_lock(&session->reorder_q.lock); - skb_queue_walk(&session->reorder_q, skbp) { + spin_lock_bh(&session->reorder_q.lock); + skb_queue_walk_safe(&session->reorder_q, skbp, tmp) { if (PPPOL2TP_SKB_CB(skbp)->ns > ns) { __skb_insert(skb, skbp->prev, skbp, &session->reorder_q); PRINTK(session->debug, PPPOL2TP_MSG_SEQ, KERN_DEBUG, @@ -360,7 +361,7 @@ static void pppol2tp_recv_queue_skb(struct pppol2tp_session *session, struct sk_ __skb_queue_tail(&session->reorder_q, skb); out: - spin_unlock(&session->reorder_q.lock); + spin_unlock_bh(&session->reorder_q.lock); } /* Dequeue a single skb. @@ -371,10 +372,9 @@ static void pppol2tp_recv_dequeue_skb(struct pppol2tp_session *session, struct s int length = PPPOL2TP_SKB_CB(skb)->length; struct sock *session_sock = NULL; - /* We're about to requeue the skb, so unlink it and return resources + /* We're about to requeue the skb, so return resources * to its current owner (a socket receive buffer). */ - skb_unlink(skb, &session->reorder_q); skb_orphan(skb); tunnel->stats.rx_packets++; @@ -442,7 +442,7 @@ static void pppol2tp_recv_dequeue(struct pppol2tp_session *session) * expect to send up next, dequeue it and any other * in-sequence packets behind it. */ - spin_lock(&session->reorder_q.lock); + spin_lock_bh(&session->reorder_q.lock); skb_queue_walk_safe(&session->reorder_q, skb, tmp) { if (time_after(jiffies, PPPOL2TP_SKB_CB(skb)->expires)) { session->stats.rx_seq_discards++; @@ -455,6 +455,7 @@ static void pppol2tp_recv_dequeue(struct pppol2tp_session *session) skb_queue_len(&session->reorder_q)); __skb_unlink(skb, &session->reorder_q); kfree_skb(skb); + sock_put(session->sock); continue; } @@ -469,13 +470,18 @@ static void pppol2tp_recv_dequeue(struct pppol2tp_session *session) goto out; } } - spin_unlock(&session->reorder_q.lock); + __skb_unlink(skb, &session->reorder_q); + + /* Process the skb. We release the queue lock while we + * do so to let other contexts process the queue. + */ + spin_unlock_bh(&session->reorder_q.lock); pppol2tp_recv_dequeue_skb(session, skb); - spin_lock(&session->reorder_q.lock); + spin_lock_bh(&session->reorder_q.lock); } out: - spin_unlock(&session->reorder_q.lock); + spin_unlock_bh(&session->reorder_q.lock); } /* Internal receive frame. Do the real work of receiving an L2TP data frame @@ -1058,7 +1064,7 @@ static int pppol2tp_xmit(struct ppp_channel *chan, struct sk_buff *skb) /* Get routing info from the tunnel socket */ dst_release(skb->dst); - skb->dst = sk_dst_get(sk_tun); + skb->dst = dst_clone(__sk_dst_get(sk_tun)); skb_orphan(skb); skb->sk = sk_tun; @@ -1106,10 +1112,12 @@ static void pppol2tp_tunnel_closeall(struct pppol2tp_tunnel *tunnel) PRINTK(tunnel->debug, PPPOL2TP_MSG_CONTROL, KERN_INFO, "%s: closing all sessions...\n", tunnel->name); - write_lock(&tunnel->hlist_lock); + write_lock_bh(&tunnel->hlist_lock); for (hash = 0; hash < PPPOL2TP_HASH_SIZE; hash++) { again: hlist_for_each_safe(walk, tmp, &tunnel->session_hlist[hash]) { + struct sk_buff *skb; + session = hlist_entry(walk, struct pppol2tp_session, hlist); sk = session->sock; @@ -1126,7 +1134,7 @@ again: * disappear as we're jumping between locks. */ sock_hold(sk); - write_unlock(&tunnel->hlist_lock); + write_unlock_bh(&tunnel->hlist_lock); lock_sock(sk); if (sk->sk_state & (PPPOX_CONNECTED | PPPOX_BOUND)) { @@ -1138,7 +1146,10 @@ again: /* Purge any queued data */ skb_queue_purge(&sk->sk_receive_queue); skb_queue_purge(&sk->sk_write_queue); - skb_queue_purge(&session->reorder_q); + while ((skb = skb_dequeue(&session->reorder_q))) { + kfree_skb(skb); + sock_put(sk); + } release_sock(sk); sock_put(sk); @@ -1148,11 +1159,11 @@ again: * list so we are guaranteed to make forward * progress. */ - write_lock(&tunnel->hlist_lock); + write_lock_bh(&tunnel->hlist_lock); goto again; } } - write_unlock(&tunnel->hlist_lock); + write_unlock_bh(&tunnel->hlist_lock); } /* Really kill the tunnel. @@ -1161,9 +1172,9 @@ again: static void pppol2tp_tunnel_free(struct pppol2tp_tunnel *tunnel) { /* Remove from socket list */ - write_lock(&pppol2tp_tunnel_list_lock); + write_lock_bh(&pppol2tp_tunnel_list_lock); list_del_init(&tunnel->list); - write_unlock(&pppol2tp_tunnel_list_lock); + write_unlock_bh(&pppol2tp_tunnel_list_lock); atomic_dec(&pppol2tp_tunnel_count); kfree(tunnel); @@ -1239,9 +1250,9 @@ static void pppol2tp_session_destruct(struct sock *sk) /* Delete the session socket from the * hash */ - write_lock(&tunnel->hlist_lock); + write_lock_bh(&tunnel->hlist_lock); hlist_del_init(&session->hlist); - write_unlock(&tunnel->hlist_lock); + write_unlock_bh(&tunnel->hlist_lock); atomic_dec(&pppol2tp_session_count); } @@ -1386,9 +1397,9 @@ static struct sock *pppol2tp_prepare_tunnel_socket(int fd, u16 tunnel_id, /* Add tunnel to our list */ INIT_LIST_HEAD(&tunnel->list); - write_lock(&pppol2tp_tunnel_list_lock); + write_lock_bh(&pppol2tp_tunnel_list_lock); list_add(&tunnel->list, &pppol2tp_tunnel_list); - write_unlock(&pppol2tp_tunnel_list_lock); + write_unlock_bh(&pppol2tp_tunnel_list_lock); atomic_inc(&pppol2tp_tunnel_count); /* Bump the reference count. The tunnel context is deleted @@ -1593,11 +1604,11 @@ static int pppol2tp_connect(struct socket *sock, struct sockaddr *uservaddr, sk->sk_user_data = session; /* Add session to the tunnel's hash list */ - write_lock(&tunnel->hlist_lock); + write_lock_bh(&tunnel->hlist_lock); hlist_add_head(&session->hlist, pppol2tp_session_id_hash(tunnel, session->tunnel_addr.s_session)); - write_unlock(&tunnel->hlist_lock); + write_unlock_bh(&tunnel->hlist_lock); atomic_inc(&pppol2tp_session_count); @@ -2199,7 +2210,7 @@ static struct pppol2tp_session *next_session(struct pppol2tp_tunnel *tunnel, str int next = 0; int i; - read_lock(&tunnel->hlist_lock); + read_lock_bh(&tunnel->hlist_lock); for (i = 0; i < PPPOL2TP_HASH_SIZE; i++) { hlist_for_each_entry(session, walk, &tunnel->session_hlist[i], hlist) { if (curr == NULL) { @@ -2217,7 +2228,7 @@ static struct pppol2tp_session *next_session(struct pppol2tp_tunnel *tunnel, str } } out: - read_unlock(&tunnel->hlist_lock); + read_unlock_bh(&tunnel->hlist_lock); if (!found) session = NULL; @@ -2228,13 +2239,13 @@ static struct pppol2tp_tunnel *next_tunnel(struct pppol2tp_tunnel *curr) { struct pppol2tp_tunnel *tunnel = NULL; - read_lock(&pppol2tp_tunnel_list_lock); + read_lock_bh(&pppol2tp_tunnel_list_lock); if (list_is_last(&curr->list, &pppol2tp_tunnel_list)) { goto out; } tunnel = list_entry(curr->list.next, struct pppol2tp_tunnel, list); out: - read_unlock(&pppol2tp_tunnel_list_lock); + read_unlock_bh(&pppol2tp_tunnel_list_lock); return tunnel; } diff --git a/drivers/net/ps3_gelic_wireless.c b/drivers/net/ps3_gelic_wireless.c index 750d2a99cb4f..daf5abab9534 100644 --- a/drivers/net/ps3_gelic_wireless.c +++ b/drivers/net/ps3_gelic_wireless.c @@ -2690,6 +2690,7 @@ int gelic_wl_driver_probe(struct gelic_card *card) return -ENOMEM; /* setup net_device structure */ + SET_NETDEV_DEV(netdev, &card->dev->core); gelic_wl_setup_netdev_ops(netdev); /* setup some of net_device and register it */ diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index 6179a0a2032c..c72787adeba3 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -1088,7 +1088,7 @@ static int s2io_print_pci_mode(struct s2io_nic *nic) * '-1' on failure */ -int init_tti(struct s2io_nic *nic, int link) +static int init_tti(struct s2io_nic *nic, int link) { struct XENA_dev_config __iomem *bar0 = nic->bar0; register u64 val64 = 0; diff --git a/drivers/net/sis190.c b/drivers/net/sis190.c index 202fdf356621..20745fd4e973 100644 --- a/drivers/net/sis190.c +++ b/drivers/net/sis190.c @@ -1633,13 +1633,18 @@ static inline void sis190_init_rxfilter(struct net_device *dev) static int __devinit sis190_get_mac_addr(struct pci_dev *pdev, struct net_device *dev) { - u8 from; + int rc; + + rc = sis190_get_mac_addr_from_eeprom(pdev, dev); + if (rc < 0) { + u8 reg; - pci_read_config_byte(pdev, 0x73, &from); + pci_read_config_byte(pdev, 0x73, ®); - return (from & 0x00000001) ? - sis190_get_mac_addr_from_apc(pdev, dev) : - sis190_get_mac_addr_from_eeprom(pdev, dev); + if (reg & 0x00000001) + rc = sis190_get_mac_addr_from_apc(pdev, dev); + } + return rc; } static void sis190_set_speed_auto(struct net_device *dev) diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 9a6295909e43..54c662690f65 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -572,8 +572,9 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port) default: /* set Tx LED (LED_TX) to blink mode on Rx OR Tx activity */ ledctrl |= PHY_M_LED_BLINK_RT(BLINK_84MS) | PHY_M_LEDC_TX_CTRL; + /* turn off the Rx LED (LED_RX) */ - ledover &= ~PHY_M_LED_MO_RX; + ledover |= PHY_M_LED_MO_RX(MO_LED_OFF); } if (hw->chip_id == CHIP_ID_YUKON_EC_U && @@ -602,7 +603,7 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port) if (sky2->autoneg == AUTONEG_DISABLE || sky2->speed == SPEED_100) { /* turn on 100 Mbps LED (LED_LINK100) */ - ledover |= PHY_M_LED_MO_100; + ledover |= PHY_M_LED_MO_100(MO_LED_ON); } if (ledover) @@ -3322,82 +3323,80 @@ static void sky2_set_multicast(struct net_device *dev) /* Can have one global because blinking is controlled by * ethtool and that is always under RTNL mutex */ -static void sky2_led(struct sky2_hw *hw, unsigned port, int on) +static void sky2_led(struct sky2_port *sky2, enum led_mode mode) { - u16 pg; + struct sky2_hw *hw = sky2->hw; + unsigned port = sky2->port; - switch (hw->chip_id) { - case CHIP_ID_YUKON_XL: + spin_lock_bh(&sky2->phy_lock); + if (hw->chip_id == CHIP_ID_YUKON_EC_U || + hw->chip_id == CHIP_ID_YUKON_EX || + hw->chip_id == CHIP_ID_YUKON_SUPR) { + u16 pg; pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR); gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3); - gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, - on ? (PHY_M_LEDC_LOS_CTRL(1) | - PHY_M_LEDC_INIT_CTRL(7) | - PHY_M_LEDC_STA1_CTRL(7) | - PHY_M_LEDC_STA0_CTRL(7)) - : 0); - gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg); - break; + switch (mode) { + case MO_LED_OFF: + gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, + PHY_M_LEDC_LOS_CTRL(8) | + PHY_M_LEDC_INIT_CTRL(8) | + PHY_M_LEDC_STA1_CTRL(8) | + PHY_M_LEDC_STA0_CTRL(8)); + break; + case MO_LED_ON: + gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, + PHY_M_LEDC_LOS_CTRL(9) | + PHY_M_LEDC_INIT_CTRL(9) | + PHY_M_LEDC_STA1_CTRL(9) | + PHY_M_LEDC_STA0_CTRL(9)); + break; + case MO_LED_BLINK: + gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, + PHY_M_LEDC_LOS_CTRL(0xa) | + PHY_M_LEDC_INIT_CTRL(0xa) | + PHY_M_LEDC_STA1_CTRL(0xa) | + PHY_M_LEDC_STA0_CTRL(0xa)); + break; + case MO_LED_NORM: + gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, + PHY_M_LEDC_LOS_CTRL(1) | + PHY_M_LEDC_INIT_CTRL(8) | + PHY_M_LEDC_STA1_CTRL(7) | + PHY_M_LEDC_STA0_CTRL(7)); + } - default: - gm_phy_write(hw, port, PHY_MARV_LED_CTRL, 0); + gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg); + } else gm_phy_write(hw, port, PHY_MARV_LED_OVER, - on ? PHY_M_LED_ALL : 0); - } + PHY_M_LED_MO_DUP(mode) | + PHY_M_LED_MO_10(mode) | + PHY_M_LED_MO_100(mode) | + PHY_M_LED_MO_1000(mode) | + PHY_M_LED_MO_RX(mode) | + PHY_M_LED_MO_TX(mode)); + + spin_unlock_bh(&sky2->phy_lock); } /* blink LED's for finding board */ static int sky2_phys_id(struct net_device *dev, u32 data) { struct sky2_port *sky2 = netdev_priv(dev); - struct sky2_hw *hw = sky2->hw; - unsigned port = sky2->port; - u16 ledctrl, ledover = 0; - long ms; - int interrupted; - int onoff = 1; + unsigned int i; - if (!data || data > (u32) (MAX_SCHEDULE_TIMEOUT / HZ)) - ms = jiffies_to_msecs(MAX_SCHEDULE_TIMEOUT); - else - ms = data * 1000; - - /* save initial values */ - spin_lock_bh(&sky2->phy_lock); - if (hw->chip_id == CHIP_ID_YUKON_XL) { - u16 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR); - gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3); - ledctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL); - gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg); - } else { - ledctrl = gm_phy_read(hw, port, PHY_MARV_LED_CTRL); - ledover = gm_phy_read(hw, port, PHY_MARV_LED_OVER); - } - - interrupted = 0; - while (!interrupted && ms > 0) { - sky2_led(hw, port, onoff); - onoff = !onoff; - - spin_unlock_bh(&sky2->phy_lock); - interrupted = msleep_interruptible(250); - spin_lock_bh(&sky2->phy_lock); - - ms -= 250; - } + if (data == 0) + data = UINT_MAX; - /* resume regularly scheduled programming */ - if (hw->chip_id == CHIP_ID_YUKON_XL) { - u16 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR); - gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3); - gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ledctrl); - gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg); - } else { - gm_phy_write(hw, port, PHY_MARV_LED_CTRL, ledctrl); - gm_phy_write(hw, port, PHY_MARV_LED_OVER, ledover); + for (i = 0; i < data; i++) { + sky2_led(sky2, MO_LED_ON); + if (msleep_interruptible(500)) + break; + sky2_led(sky2, MO_LED_OFF); + if (msleep_interruptible(500)) + break; } - spin_unlock_bh(&sky2->phy_lock); + sky2_led(sky2, MO_LED_NORM); return 0; } diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h index 5ab5c1c7c5aa..7bb3ba9bcbd8 100644 --- a/drivers/net/sky2.h +++ b/drivers/net/sky2.h @@ -1318,18 +1318,21 @@ enum { BLINK_670MS = 4,/* 670 ms */ }; -/**** PHY_MARV_LED_OVER 16 bit r/w LED control */ -enum { - PHY_M_LED_MO_DUP = 3<<10,/* Bit 11..10: Duplex */ - PHY_M_LED_MO_10 = 3<<8, /* Bit 9.. 8: Link 10 */ - PHY_M_LED_MO_100 = 3<<6, /* Bit 7.. 6: Link 100 */ - PHY_M_LED_MO_1000 = 3<<4, /* Bit 5.. 4: Link 1000 */ - PHY_M_LED_MO_RX = 3<<2, /* Bit 3.. 2: Rx */ - PHY_M_LED_MO_TX = 3<<0, /* Bit 1.. 0: Tx */ - - PHY_M_LED_ALL = PHY_M_LED_MO_DUP | PHY_M_LED_MO_10 - | PHY_M_LED_MO_100 | PHY_M_LED_MO_1000 - | PHY_M_LED_MO_RX, +/***** PHY_MARV_LED_OVER 16 bit r/w Manual LED Override Reg *****/ +#define PHY_M_LED_MO_SGMII(x) ((x)<<14) /* Bit 15..14: SGMII AN Timer */ + +#define PHY_M_LED_MO_DUP(x) ((x)<<10) /* Bit 11..10: Duplex */ +#define PHY_M_LED_MO_10(x) ((x)<<8) /* Bit 9.. 8: Link 10 */ +#define PHY_M_LED_MO_100(x) ((x)<<6) /* Bit 7.. 6: Link 100 */ +#define PHY_M_LED_MO_1000(x) ((x)<<4) /* Bit 5.. 4: Link 1000 */ +#define PHY_M_LED_MO_RX(x) ((x)<<2) /* Bit 3.. 2: Rx */ +#define PHY_M_LED_MO_TX(x) ((x)<<0) /* Bit 1.. 0: Tx */ + +enum led_mode { + MO_LED_NORM = 0, + MO_LED_BLINK = 1, + MO_LED_OFF = 2, + MO_LED_ON = 3, }; /***** PHY_MARV_EXT_CTRL_2 16 bit r/w Ext. PHY Specific Ctrl 2 *****/ diff --git a/drivers/net/tlan.c b/drivers/net/tlan.c index 3af5b92b48c8..0166407d7061 100644 --- a/drivers/net/tlan.c +++ b/drivers/net/tlan.c @@ -1400,7 +1400,7 @@ static void TLan_SetMulticastList( struct net_device *dev ) * **************************************************************/ -u32 TLan_HandleInvalid( struct net_device *dev, u16 host_int ) +static u32 TLan_HandleInvalid( struct net_device *dev, u16 host_int ) { /* printk( "TLAN: Invalid interrupt on %s.\n", dev->name ); */ return 0; @@ -1432,7 +1432,7 @@ u32 TLan_HandleInvalid( struct net_device *dev, u16 host_int ) * **************************************************************/ -u32 TLan_HandleTxEOF( struct net_device *dev, u16 host_int ) +static u32 TLan_HandleTxEOF( struct net_device *dev, u16 host_int ) { TLanPrivateInfo *priv = netdev_priv(dev); int eoc = 0; @@ -1518,7 +1518,7 @@ u32 TLan_HandleTxEOF( struct net_device *dev, u16 host_int ) * **************************************************************/ -u32 TLan_HandleStatOverflow( struct net_device *dev, u16 host_int ) +static u32 TLan_HandleStatOverflow( struct net_device *dev, u16 host_int ) { TLan_ReadAndClearStats( dev, TLAN_RECORD ); @@ -1554,7 +1554,7 @@ u32 TLan_HandleStatOverflow( struct net_device *dev, u16 host_int ) * **************************************************************/ -u32 TLan_HandleRxEOF( struct net_device *dev, u16 host_int ) +static u32 TLan_HandleRxEOF( struct net_device *dev, u16 host_int ) { TLanPrivateInfo *priv = netdev_priv(dev); u32 ack = 0; @@ -1689,7 +1689,7 @@ u32 TLan_HandleRxEOF( struct net_device *dev, u16 host_int ) * **************************************************************/ -u32 TLan_HandleDummy( struct net_device *dev, u16 host_int ) +static u32 TLan_HandleDummy( struct net_device *dev, u16 host_int ) { printk( "TLAN: Test interrupt on %s.\n", dev->name ); return 1; @@ -1719,7 +1719,7 @@ u32 TLan_HandleDummy( struct net_device *dev, u16 host_int ) * **************************************************************/ -u32 TLan_HandleTxEOC( struct net_device *dev, u16 host_int ) +static u32 TLan_HandleTxEOC( struct net_device *dev, u16 host_int ) { TLanPrivateInfo *priv = netdev_priv(dev); TLanList *head_list; @@ -1767,7 +1767,7 @@ u32 TLan_HandleTxEOC( struct net_device *dev, u16 host_int ) * **************************************************************/ -u32 TLan_HandleStatusCheck( struct net_device *dev, u16 host_int ) +static u32 TLan_HandleStatusCheck( struct net_device *dev, u16 host_int ) { TLanPrivateInfo *priv = netdev_priv(dev); u32 ack; @@ -1842,7 +1842,7 @@ u32 TLan_HandleStatusCheck( struct net_device *dev, u16 host_int ) * **************************************************************/ -u32 TLan_HandleRxEOC( struct net_device *dev, u16 host_int ) +static u32 TLan_HandleRxEOC( struct net_device *dev, u16 host_int ) { TLanPrivateInfo *priv = netdev_priv(dev); dma_addr_t head_list_phys; @@ -1902,7 +1902,7 @@ u32 TLan_HandleRxEOC( struct net_device *dev, u16 host_int ) * **************************************************************/ -void TLan_Timer( unsigned long data ) +static void TLan_Timer( unsigned long data ) { struct net_device *dev = (struct net_device *) data; TLanPrivateInfo *priv = netdev_priv(dev); @@ -1983,7 +1983,7 @@ void TLan_Timer( unsigned long data ) * **************************************************************/ -void TLan_ResetLists( struct net_device *dev ) +static void TLan_ResetLists( struct net_device *dev ) { TLanPrivateInfo *priv = netdev_priv(dev); int i; @@ -2043,7 +2043,7 @@ void TLan_ResetLists( struct net_device *dev ) } /* TLan_ResetLists */ -void TLan_FreeLists( struct net_device *dev ) +static void TLan_FreeLists( struct net_device *dev ) { TLanPrivateInfo *priv = netdev_priv(dev); int i; @@ -2092,7 +2092,7 @@ void TLan_FreeLists( struct net_device *dev ) * **************************************************************/ -void TLan_PrintDio( u16 io_base ) +static void TLan_PrintDio( u16 io_base ) { u32 data0, data1; int i; @@ -2127,7 +2127,7 @@ void TLan_PrintDio( u16 io_base ) * **************************************************************/ -void TLan_PrintList( TLanList *list, char *type, int num) +static void TLan_PrintList( TLanList *list, char *type, int num) { int i; @@ -2163,7 +2163,7 @@ void TLan_PrintList( TLanList *list, char *type, int num) * **************************************************************/ -void TLan_ReadAndClearStats( struct net_device *dev, int record ) +static void TLan_ReadAndClearStats( struct net_device *dev, int record ) { TLanPrivateInfo *priv = netdev_priv(dev); u32 tx_good, tx_under; @@ -2238,7 +2238,7 @@ void TLan_ReadAndClearStats( struct net_device *dev, int record ) * **************************************************************/ -void +static void TLan_ResetAdapter( struct net_device *dev ) { TLanPrivateInfo *priv = netdev_priv(dev); @@ -2324,7 +2324,7 @@ TLan_ResetAdapter( struct net_device *dev ) -void +static void TLan_FinishReset( struct net_device *dev ) { TLanPrivateInfo *priv = netdev_priv(dev); @@ -2448,7 +2448,7 @@ TLan_FinishReset( struct net_device *dev ) * **************************************************************/ -void TLan_SetMac( struct net_device *dev, int areg, char *mac ) +static void TLan_SetMac( struct net_device *dev, int areg, char *mac ) { int i; @@ -2490,7 +2490,7 @@ void TLan_SetMac( struct net_device *dev, int areg, char *mac ) * ********************************************************************/ -void TLan_PhyPrint( struct net_device *dev ) +static void TLan_PhyPrint( struct net_device *dev ) { TLanPrivateInfo *priv = netdev_priv(dev); u16 i, data0, data1, data2, data3, phy; @@ -2539,7 +2539,7 @@ void TLan_PhyPrint( struct net_device *dev ) * ********************************************************************/ -void TLan_PhyDetect( struct net_device *dev ) +static void TLan_PhyDetect( struct net_device *dev ) { TLanPrivateInfo *priv = netdev_priv(dev); u16 control; @@ -2586,7 +2586,7 @@ void TLan_PhyDetect( struct net_device *dev ) -void TLan_PhyPowerDown( struct net_device *dev ) +static void TLan_PhyPowerDown( struct net_device *dev ) { TLanPrivateInfo *priv = netdev_priv(dev); u16 value; @@ -2611,7 +2611,7 @@ void TLan_PhyPowerDown( struct net_device *dev ) -void TLan_PhyPowerUp( struct net_device *dev ) +static void TLan_PhyPowerUp( struct net_device *dev ) { TLanPrivateInfo *priv = netdev_priv(dev); u16 value; @@ -2632,7 +2632,7 @@ void TLan_PhyPowerUp( struct net_device *dev ) -void TLan_PhyReset( struct net_device *dev ) +static void TLan_PhyReset( struct net_device *dev ) { TLanPrivateInfo *priv = netdev_priv(dev); u16 phy; @@ -2660,7 +2660,7 @@ void TLan_PhyReset( struct net_device *dev ) -void TLan_PhyStartLink( struct net_device *dev ) +static void TLan_PhyStartLink( struct net_device *dev ) { TLanPrivateInfo *priv = netdev_priv(dev); u16 ability; @@ -2747,7 +2747,7 @@ void TLan_PhyStartLink( struct net_device *dev ) -void TLan_PhyFinishAutoNeg( struct net_device *dev ) +static void TLan_PhyFinishAutoNeg( struct net_device *dev ) { TLanPrivateInfo *priv = netdev_priv(dev); u16 an_adv; @@ -2903,7 +2903,7 @@ void TLan_PhyMonitor( struct net_device *dev ) * **************************************************************/ -int TLan_MiiReadReg( struct net_device *dev, u16 phy, u16 reg, u16 *val ) +static int TLan_MiiReadReg( struct net_device *dev, u16 phy, u16 reg, u16 *val ) { u8 nack; u16 sio, tmp; @@ -2993,7 +2993,7 @@ int TLan_MiiReadReg( struct net_device *dev, u16 phy, u16 reg, u16 *val ) * **************************************************************/ -void TLan_MiiSendData( u16 base_port, u32 data, unsigned num_bits ) +static void TLan_MiiSendData( u16 base_port, u32 data, unsigned num_bits ) { u16 sio; u32 i; @@ -3035,7 +3035,7 @@ void TLan_MiiSendData( u16 base_port, u32 data, unsigned num_bits ) * **************************************************************/ -void TLan_MiiSync( u16 base_port ) +static void TLan_MiiSync( u16 base_port ) { int i; u16 sio; @@ -3074,7 +3074,7 @@ void TLan_MiiSync( u16 base_port ) * **************************************************************/ -void TLan_MiiWriteReg( struct net_device *dev, u16 phy, u16 reg, u16 val ) +static void TLan_MiiWriteReg( struct net_device *dev, u16 phy, u16 reg, u16 val ) { u16 sio; int minten; @@ -3144,7 +3144,7 @@ void TLan_MiiWriteReg( struct net_device *dev, u16 phy, u16 reg, u16 val ) * **************************************************************/ -void TLan_EeSendStart( u16 io_base ) +static void TLan_EeSendStart( u16 io_base ) { u16 sio; @@ -3184,7 +3184,7 @@ void TLan_EeSendStart( u16 io_base ) * **************************************************************/ -int TLan_EeSendByte( u16 io_base, u8 data, int stop ) +static int TLan_EeSendByte( u16 io_base, u8 data, int stop ) { int err; u8 place; @@ -3245,7 +3245,7 @@ int TLan_EeSendByte( u16 io_base, u8 data, int stop ) * **************************************************************/ -void TLan_EeReceiveByte( u16 io_base, u8 *data, int stop ) +static void TLan_EeReceiveByte( u16 io_base, u8 *data, int stop ) { u8 place; u16 sio; @@ -3303,7 +3303,7 @@ void TLan_EeReceiveByte( u16 io_base, u8 *data, int stop ) * **************************************************************/ -int TLan_EeReadByte( struct net_device *dev, u8 ee_addr, u8 *data ) +static int TLan_EeReadByte( struct net_device *dev, u8 ee_addr, u8 *data ) { int err; TLanPrivateInfo *priv = netdev_priv(dev); diff --git a/drivers/net/tulip/de2104x.c b/drivers/net/tulip/de2104x.c index 77d9dd7ea34f..567c62757e9d 100644 --- a/drivers/net/tulip/de2104x.c +++ b/drivers/net/tulip/de2104x.c @@ -910,7 +910,8 @@ static void de_set_media (struct de_private *de) unsigned media = de->media_type; u32 macmode = dr32(MacMode); - BUG_ON(de_is_running(de)); + if (de_is_running(de)) + printk(KERN_WARNING "%s: chip is running while changing media!\n", de->dev->name); if (de->de21040) dw32(CSR11, FULL_DUPLEX_MAGIC); diff --git a/drivers/net/tulip/uli526x.c b/drivers/net/tulip/uli526x.c index a7afeea156bd..a59c1f224aa8 100644 --- a/drivers/net/tulip/uli526x.c +++ b/drivers/net/tulip/uli526x.c @@ -482,9 +482,11 @@ static void uli526x_init(struct net_device *dev) struct uli526x_board_info *db = netdev_priv(dev); unsigned long ioaddr = db->ioaddr; u8 phy_tmp; + u8 timeout; u16 phy_value; u16 phy_reg_reset; + ULI526X_DBUG(0, "uli526x_init()", 0); /* Reset M526x MAC controller */ @@ -509,11 +511,19 @@ static void uli526x_init(struct net_device *dev) /* Parser SROM and media mode */ db->media_mode = uli526x_media_mode; - /* Phyxcer capability setting */ + /* phyxcer capability setting */ phy_reg_reset = phy_read(db->ioaddr, db->phy_addr, 0, db->chip_id); phy_reg_reset = (phy_reg_reset | 0x8000); phy_write(db->ioaddr, db->phy_addr, 0, phy_reg_reset, db->chip_id); + + /* See IEEE 802.3-2002.pdf (Section 2, Chapter "22.2.4 Management + * functions") or phy data sheet for details on phy reset + */ udelay(500); + timeout = 10; + while (timeout-- && + phy_read(db->ioaddr, db->phy_addr, 0, db->chip_id) & 0x8000) + udelay(100); /* Process Phyxcer Media Mode */ uli526x_set_phyxcer(db); diff --git a/drivers/net/tun.c b/drivers/net/tun.c index 038c1ef94d2e..7b816a032957 100644 --- a/drivers/net/tun.c +++ b/drivers/net/tun.c @@ -663,7 +663,11 @@ static int tun_chr_ioctl(struct inode *inode, struct file *file, case SIOCSIFHWADDR: { /* try to set the actual net device's hw address */ - int ret = dev_set_mac_address(tun->dev, &ifr.ifr_hwaddr); + int ret; + + rtnl_lock(); + ret = dev_set_mac_address(tun->dev, &ifr.ifr_hwaddr); + rtnl_unlock(); if (ret == 0) { /** Set the character device's hardware address. This is used when diff --git a/drivers/net/via-rhine.c b/drivers/net/via-rhine.c index 7c851b1e6daa..8c9d6ae2bb31 100644 --- a/drivers/net/via-rhine.c +++ b/drivers/net/via-rhine.c @@ -1893,7 +1893,7 @@ static void rhine_shutdown (struct pci_dev *pdev) /* Make sure we use pattern 0, 1 and not 4, 5 */ if (rp->quirks & rq6patterns) - iowrite8(0x04, ioaddr + 0xA7); + iowrite8(0x04, ioaddr + WOLcgClr); if (rp->wolopts & WAKE_MAGIC) { iowrite8(WOLmagic, ioaddr + WOLcrSet); diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index fdc23678117b..19fd4cb0ddf8 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -361,6 +361,7 @@ static int virtnet_probe(struct virtio_device *vdev) netif_napi_add(dev, &vi->napi, virtnet_poll, napi_weight); vi->dev = dev; vi->vdev = vdev; + vdev->priv = vi; /* We expect two virtqueues, receive then send. */ vi->rvq = vdev->config->find_vq(vdev, 0, skb_recv_done); @@ -395,7 +396,6 @@ static int virtnet_probe(struct virtio_device *vdev) } pr_debug("virtnet: registered device %s\n", dev->name); - vdev->priv = vi; return 0; unregister: diff --git a/drivers/net/wan/sbni.c b/drivers/net/wan/sbni.c index 15d5c58e57bc..e59255a155a9 100644 --- a/drivers/net/wan/sbni.c +++ b/drivers/net/wan/sbni.c @@ -751,7 +751,7 @@ upload_data( struct net_device *dev, unsigned framelen, unsigned frameno, } -static __inline void +static inline void send_complete( struct net_local *nl ) { #ifdef CONFIG_SBNI_MULTILINE diff --git a/drivers/net/wireless/b43/Kconfig b/drivers/net/wireless/b43/Kconfig index 1a2141dabdc7..8bc4bc4c330e 100644 --- a/drivers/net/wireless/b43/Kconfig +++ b/drivers/net/wireless/b43/Kconfig @@ -32,6 +32,7 @@ config B43_PCI_AUTOSELECT bool depends on B43 && SSB_PCIHOST_POSSIBLE select SSB_PCIHOST + select SSB_B43_PCI_BRIDGE default y # Auto-select SSB PCICORE driver, if possible diff --git a/drivers/net/wireless/b43legacy/Kconfig b/drivers/net/wireless/b43legacy/Kconfig index 6745579ba96d..13c65faf0247 100644 --- a/drivers/net/wireless/b43legacy/Kconfig +++ b/drivers/net/wireless/b43legacy/Kconfig @@ -25,6 +25,7 @@ config B43LEGACY_PCI_AUTOSELECT bool depends on B43LEGACY && SSB_PCIHOST_POSSIBLE select SSB_PCIHOST + select SSB_B43_PCI_BRIDGE default y # Auto-select SSB PCICORE driver, if possible diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c index c39de422e220..5f3f34e1dbfd 100644 --- a/drivers/net/wireless/b43legacy/main.c +++ b/drivers/net/wireless/b43legacy/main.c @@ -3829,7 +3829,7 @@ static void b43legacy_print_driverinfo(void) #ifdef CONFIG_B43LEGACY_DMA feat_dma = "D"; #endif - printk(KERN_INFO "Broadcom 43xx driver loaded " + printk(KERN_INFO "Broadcom 43xx-legacy driver loaded " "[ Features: %s%s%s%s%s, Firmware-ID: " B43legacy_SUPPORTED_FIRMWARE_ID " ]\n", feat_pci, feat_leds, feat_rfkill, feat_pio, feat_dma); diff --git a/drivers/net/wireless/bcm43xx/Kconfig b/drivers/net/wireless/bcm43xx/Kconfig index 0159701e8456..afb8f4305c24 100644 --- a/drivers/net/wireless/bcm43xx/Kconfig +++ b/drivers/net/wireless/bcm43xx/Kconfig @@ -1,6 +1,6 @@ config BCM43XX tristate "Broadcom BCM43xx wireless support (DEPRECATED)" - depends on PCI && IEEE80211 && IEEE80211_SOFTMAC && WLAN_80211 && EXPERIMENTAL + depends on PCI && IEEE80211 && IEEE80211_SOFTMAC && WLAN_80211 && (!SSB_B43_PCI_BRIDGE || SSB != y) && EXPERIMENTAL select WIRELESS_EXT select FW_LOADER select HW_RANDOM diff --git a/drivers/net/wireless/libertas/cmd.c b/drivers/net/wireless/libertas/cmd.c index eab020338fde..b3c1acbcc655 100644 --- a/drivers/net/wireless/libertas/cmd.c +++ b/drivers/net/wireless/libertas/cmd.c @@ -1040,7 +1040,6 @@ int lbs_mesh_access(struct lbs_private *priv, uint16_t cmd_action, lbs_deb_leave(LBS_DEB_CMD); return ret; } -EXPORT_SYMBOL_GPL(lbs_mesh_access); int lbs_mesh_config(struct lbs_private *priv, uint16_t enable, uint16_t chan) { @@ -1576,7 +1575,6 @@ done: lbs_deb_leave_args(LBS_DEB_HOST, "ret %d", ret); return ret; } -EXPORT_SYMBOL_GPL(lbs_prepare_and_send_command); /** * @brief This function allocates the command buffer and link diff --git a/drivers/net/wireless/libertas/cmdresp.c b/drivers/net/wireless/libertas/cmdresp.c index 159216a91903..f0ef7081bdeb 100644 --- a/drivers/net/wireless/libertas/cmdresp.c +++ b/drivers/net/wireless/libertas/cmdresp.c @@ -562,9 +562,7 @@ int lbs_process_rx_command(struct lbs_private *priv) } resp = (void *)priv->upld_buf; - - curcmd = le16_to_cpu(resp->command); - + curcmd = le16_to_cpu(priv->cur_cmd->cmdbuf->command); respcmd = le16_to_cpu(resp->command); result = le16_to_cpu(resp->result); @@ -572,15 +570,15 @@ int lbs_process_rx_command(struct lbs_private *priv) respcmd, le16_to_cpu(resp->seqnum), priv->upld_len, jiffies); lbs_deb_hex(LBS_DEB_HOST, "CMD_RESP", (void *) resp, priv->upld_len); - if (resp->seqnum != resp->seqnum) { + if (resp->seqnum != priv->cur_cmd->cmdbuf->seqnum) { lbs_pr_info("Received CMD_RESP with invalid sequence %d (expected %d)\n", - le16_to_cpu(resp->seqnum), le16_to_cpu(resp->seqnum)); + le16_to_cpu(resp->seqnum), le16_to_cpu(priv->cur_cmd->cmdbuf->seqnum)); spin_unlock_irqrestore(&priv->driver_lock, flags); ret = -1; goto done; } if (respcmd != CMD_RET(curcmd) && - respcmd != CMD_802_11_ASSOCIATE && curcmd != CMD_RET_802_11_ASSOCIATE) { + respcmd != CMD_RET_802_11_ASSOCIATE && curcmd != CMD_802_11_ASSOCIATE) { lbs_pr_info("Invalid CMD_RESP %x to command %x!\n", respcmd, curcmd); spin_unlock_irqrestore(&priv->driver_lock, flags); ret = -1; diff --git a/drivers/net/wireless/libertas/decl.h b/drivers/net/wireless/libertas/decl.h index aaacd9bd6bd2..4e22341b4f3d 100644 --- a/drivers/net/wireless/libertas/decl.h +++ b/drivers/net/wireless/libertas/decl.h @@ -69,7 +69,6 @@ struct lbs_private *lbs_add_card(void *card, struct device *dmdev); int lbs_remove_card(struct lbs_private *priv); int lbs_start_card(struct lbs_private *priv); int lbs_stop_card(struct lbs_private *priv); -int lbs_reset_device(struct lbs_private *priv); void lbs_host_to_card_done(struct lbs_private *priv); int lbs_update_channel(struct lbs_private *priv); diff --git a/drivers/net/wireless/libertas/main.c b/drivers/net/wireless/libertas/main.c index 84fb49ca0fae..4d4e2f3b66ac 100644 --- a/drivers/net/wireless/libertas/main.c +++ b/drivers/net/wireless/libertas/main.c @@ -1351,8 +1351,6 @@ done: lbs_deb_leave_args(LBS_DEB_MESH, "ret %d", ret); return ret; } -EXPORT_SYMBOL_GPL(lbs_add_mesh); - static void lbs_remove_mesh(struct lbs_private *priv) { @@ -1372,7 +1370,6 @@ static void lbs_remove_mesh(struct lbs_private *priv) free_netdev(mesh_dev); lbs_deb_leave(LBS_DEB_MESH); } -EXPORT_SYMBOL_GPL(lbs_remove_mesh); /** * @brief This function finds the CFP in @@ -1458,20 +1455,6 @@ void lbs_interrupt(struct lbs_private *priv) } EXPORT_SYMBOL_GPL(lbs_interrupt); -int lbs_reset_device(struct lbs_private *priv) -{ - int ret; - - lbs_deb_enter(LBS_DEB_MAIN); - ret = lbs_prepare_and_send_command(priv, CMD_802_11_RESET, - CMD_ACT_HALT, 0, 0, NULL); - msleep_interruptible(10); - - lbs_deb_leave_args(LBS_DEB_MAIN, "ret %d", ret); - return ret; -} -EXPORT_SYMBOL_GPL(lbs_reset_device); - static int __init lbs_init_module(void) { lbs_deb_enter(LBS_DEB_MAIN); diff --git a/drivers/net/wireless/p54common.c b/drivers/net/wireless/p54common.c index 5cda49aff3a8..d191e055a788 100644 --- a/drivers/net/wireless/p54common.c +++ b/drivers/net/wireless/p54common.c @@ -166,18 +166,23 @@ int p54_parse_eeprom(struct ieee80211_hw *dev, void *eeprom, int len) struct p54_common *priv = dev->priv; struct eeprom_pda_wrap *wrap = NULL; struct pda_entry *entry; - int i = 0; unsigned int data_len, entry_len; void *tmp; int err; + u8 *end = (u8 *)eeprom + len; wrap = (struct eeprom_pda_wrap *) eeprom; - entry = (void *)wrap->data + wrap->len; - i += 2; - i += le16_to_cpu(entry->len)*2; - while (i < len) { + entry = (void *)wrap->data + le16_to_cpu(wrap->len); + + /* verify that at least the entry length/code fits */ + while ((u8 *)entry <= end - sizeof(*entry)) { entry_len = le16_to_cpu(entry->len); data_len = ((entry_len - 1) << 1); + + /* abort if entry exceeds whole structure */ + if ((u8 *)entry + sizeof(*entry) + data_len > end) + break; + switch (le16_to_cpu(entry->code)) { case PDR_MAC_ADDRESS: SET_IEEE80211_PERM_ADDR(dev, entry->data); @@ -249,13 +254,12 @@ int p54_parse_eeprom(struct ieee80211_hw *dev, void *eeprom, int len) priv->version = *(u8 *)(entry->data + 1); break; case PDR_END: - i = len; + /* make it overrun */ + entry_len = len; break; } entry = (void *)entry + (entry_len + 1)*2; - i += 2; - i += entry_len*2; } if (!priv->iq_autocal || !priv->output_limit || !priv->curve_data) { diff --git a/drivers/net/wireless/p54common.h b/drivers/net/wireless/p54common.h index a721334e20d9..b67ff34e26fe 100644 --- a/drivers/net/wireless/p54common.h +++ b/drivers/net/wireless/p54common.h @@ -53,10 +53,10 @@ struct pda_entry { } __attribute__ ((packed)); struct eeprom_pda_wrap { - u32 magic; - u16 pad; - u16 len; - u32 arm_opcode; + __le32 magic; + __le16 pad; + __le16 len; + __le32 arm_opcode; u8 data[0]; } __attribute__ ((packed)); diff --git a/drivers/net/wireless/rndis_wlan.c b/drivers/net/wireless/rndis_wlan.c index 8ce2ddf8024f..10b776c1adc5 100644 --- a/drivers/net/wireless/rndis_wlan.c +++ b/drivers/net/wireless/rndis_wlan.c @@ -228,9 +228,9 @@ struct NDIS_WLAN_BSSID_EX { struct NDIS_802_11_SSID Ssid; __le32 Privacy; __le32 Rssi; - enum NDIS_802_11_NETWORK_TYPE NetworkTypeInUse; + __le32 NetworkTypeInUse; struct NDIS_802_11_CONFIGURATION Configuration; - enum NDIS_802_11_NETWORK_INFRASTRUCTURE InfrastructureMode; + __le32 InfrastructureMode; u8 SupportedRates[NDIS_802_11_LENGTH_RATES_EX]; __le32 IELength; u8 IEs[0]; @@ -260,7 +260,7 @@ struct NDIS_802_11_KEY { __le32 KeyLength; u8 Bssid[6]; u8 Padding[6]; - __le64 KeyRSC; + u8 KeyRSC[8]; u8 KeyMaterial[32]; } __attribute__((packed)); @@ -279,11 +279,11 @@ struct RNDIS_CONFIG_PARAMETER_INFOBUFFER { } __attribute__((packed)); /* these have to match what is in wpa_supplicant */ -enum { WPA_ALG_NONE, WPA_ALG_WEP, WPA_ALG_TKIP, WPA_ALG_CCMP } wpa_alg; -enum { CIPHER_NONE, CIPHER_WEP40, CIPHER_TKIP, CIPHER_CCMP, CIPHER_WEP104 } - wpa_cipher; -enum { KEY_MGMT_802_1X, KEY_MGMT_PSK, KEY_MGMT_NONE, KEY_MGMT_802_1X_NO_WPA, - KEY_MGMT_WPA_NONE } wpa_key_mgmt; +enum wpa_alg { WPA_ALG_NONE, WPA_ALG_WEP, WPA_ALG_TKIP, WPA_ALG_CCMP }; +enum wpa_cipher { CIPHER_NONE, CIPHER_WEP40, CIPHER_TKIP, CIPHER_CCMP, + CIPHER_WEP104 }; +enum wpa_key_mgmt { KEY_MGMT_802_1X, KEY_MGMT_PSK, KEY_MGMT_NONE, + KEY_MGMT_802_1X_NO_WPA, KEY_MGMT_WPA_NONE }; /* * private data @@ -1508,7 +1508,7 @@ static int rndis_iw_set_encode_ext(struct net_device *dev, struct usbnet *usbdev = dev->priv; struct rndis_wext_private *priv = get_rndis_wext_priv(usbdev); struct NDIS_802_11_KEY ndis_key; - int i, keyidx, ret; + int keyidx, ret; u8 *addr; keyidx = wrqu->encoding.flags & IW_ENCODE_INDEX; @@ -1543,9 +1543,7 @@ static int rndis_iw_set_encode_ext(struct net_device *dev, ndis_key.KeyIndex = cpu_to_le32(keyidx); if (ext->ext_flags & IW_ENCODE_EXT_RX_SEQ_VALID) { - for (i = 0; i < 6; i++) - ndis_key.KeyRSC |= - cpu_to_le64(ext->rx_seq[i] << (i * 8)); + memcpy(ndis_key.KeyRSC, ext->rx_seq, 6); ndis_key.KeyIndex |= cpu_to_le32(1 << 29); } diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c index d6cba138c7ab..c69f85ed7669 100644 --- a/drivers/net/wireless/rt2x00/rt2400pci.c +++ b/drivers/net/wireless/rt2x00/rt2400pci.c @@ -960,8 +960,12 @@ static int rt2400pci_set_device_state(struct rt2x00_dev *rt2x00dev, rt2400pci_disable_radio(rt2x00dev); break; case STATE_RADIO_RX_ON: + case STATE_RADIO_RX_ON_LINK: + rt2400pci_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON); + break; case STATE_RADIO_RX_OFF: - rt2400pci_toggle_rx(rt2x00dev, state); + case STATE_RADIO_RX_OFF_LINK: + rt2400pci_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF); break; case STATE_DEEP_SLEEP: case STATE_SLEEP: diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c index e874fdcae204..91e87b53374f 100644 --- a/drivers/net/wireless/rt2x00/rt2500pci.c +++ b/drivers/net/wireless/rt2x00/rt2500pci.c @@ -1112,8 +1112,12 @@ static int rt2500pci_set_device_state(struct rt2x00_dev *rt2x00dev, rt2500pci_disable_radio(rt2x00dev); break; case STATE_RADIO_RX_ON: + case STATE_RADIO_RX_ON_LINK: + rt2500pci_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON); + break; case STATE_RADIO_RX_OFF: - rt2500pci_toggle_rx(rt2x00dev, state); + case STATE_RADIO_RX_OFF_LINK: + rt2500pci_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF); break; case STATE_DEEP_SLEEP: case STATE_SLEEP: diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c index 4ca9730e5e92..638c3d243108 100644 --- a/drivers/net/wireless/rt2x00/rt2500usb.c +++ b/drivers/net/wireless/rt2x00/rt2500usb.c @@ -1001,8 +1001,12 @@ static int rt2500usb_set_device_state(struct rt2x00_dev *rt2x00dev, rt2500usb_disable_radio(rt2x00dev); break; case STATE_RADIO_RX_ON: + case STATE_RADIO_RX_ON_LINK: + rt2500usb_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON); + break; case STATE_RADIO_RX_OFF: - rt2500usb_toggle_rx(rt2x00dev, state); + case STATE_RADIO_RX_OFF_LINK: + rt2500usb_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF); break; case STATE_DEEP_SLEEP: case STATE_SLEEP: diff --git a/drivers/net/wireless/rt2x00/rt2x00config.c b/drivers/net/wireless/rt2x00/rt2x00config.c index 72cfe00c1ed7..07adc576db49 100644 --- a/drivers/net/wireless/rt2x00/rt2x00config.c +++ b/drivers/net/wireless/rt2x00/rt2x00config.c @@ -97,12 +97,16 @@ void rt2x00lib_config_antenna(struct rt2x00_dev *rt2x00dev, libconf.ant.rx = rx; libconf.ant.tx = tx; + if (rx == rt2x00dev->link.ant.active.rx && + tx == rt2x00dev->link.ant.active.tx) + return; + /* * Antenna setup changes require the RX to be disabled, * else the changes will be ignored by the device. */ if (test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags)) - rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF); + rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF_LINK); /* * Write new antenna setup to device and reset the link tuner. @@ -116,7 +120,7 @@ void rt2x00lib_config_antenna(struct rt2x00_dev *rt2x00dev, rt2x00dev->link.ant.active.tx = libconf.ant.tx; if (test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags)) - rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON); + rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON_LINK); } void rt2x00lib_config(struct rt2x00_dev *rt2x00dev, diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c index c4be2ac4d7a4..0d51f478bcdf 100644 --- a/drivers/net/wireless/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/rt2x00/rt2x00dev.c @@ -61,11 +61,33 @@ EXPORT_SYMBOL_GPL(rt2x00lib_get_ring); /* * Link tuning handlers */ -static void rt2x00lib_start_link_tuner(struct rt2x00_dev *rt2x00dev) +void rt2x00lib_reset_link_tuner(struct rt2x00_dev *rt2x00dev) { + if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags)) + return; + + /* + * Reset link information. + * Both the currently active vgc level as well as + * the link tuner counter should be reset. Resetting + * the counter is important for devices where the + * device should only perform link tuning during the + * first minute after being enabled. + */ rt2x00dev->link.count = 0; rt2x00dev->link.vgc_level = 0; + /* + * Reset the link tuner. + */ + rt2x00dev->ops->lib->reset_tuner(rt2x00dev); +} + +static void rt2x00lib_start_link_tuner(struct rt2x00_dev *rt2x00dev) +{ + /* + * Clear all (possibly) pre-existing quality statistics. + */ memset(&rt2x00dev->link.qual, 0, sizeof(rt2x00dev->link.qual)); /* @@ -79,10 +101,7 @@ static void rt2x00lib_start_link_tuner(struct rt2x00_dev *rt2x00dev) rt2x00dev->link.qual.rx_percentage = 50; rt2x00dev->link.qual.tx_percentage = 50; - /* - * Reset the link tuner. - */ - rt2x00dev->ops->lib->reset_tuner(rt2x00dev); + rt2x00lib_reset_link_tuner(rt2x00dev); queue_delayed_work(rt2x00dev->hw->workqueue, &rt2x00dev->link.work, LINK_TUNE_INTERVAL); @@ -93,15 +112,6 @@ static void rt2x00lib_stop_link_tuner(struct rt2x00_dev *rt2x00dev) cancel_delayed_work_sync(&rt2x00dev->link.work); } -void rt2x00lib_reset_link_tuner(struct rt2x00_dev *rt2x00dev) -{ - if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags)) - return; - - rt2x00lib_stop_link_tuner(rt2x00dev); - rt2x00lib_start_link_tuner(rt2x00dev); -} - /* * Ring initialization */ @@ -260,19 +270,11 @@ static void rt2x00lib_evaluate_antenna_sample(struct rt2x00_dev *rt2x00dev) if (sample_a == sample_b) return; - if (rt2x00dev->link.ant.flags & ANTENNA_RX_DIVERSITY) { - if (sample_a > sample_b && rx == ANTENNA_B) - rx = ANTENNA_A; - else if (rx == ANTENNA_A) - rx = ANTENNA_B; - } + if (rt2x00dev->link.ant.flags & ANTENNA_RX_DIVERSITY) + rx = (sample_a > sample_b) ? ANTENNA_A : ANTENNA_B; - if (rt2x00dev->link.ant.flags & ANTENNA_TX_DIVERSITY) { - if (sample_a > sample_b && tx == ANTENNA_B) - tx = ANTENNA_A; - else if (tx == ANTENNA_A) - tx = ANTENNA_B; - } + if (rt2x00dev->link.ant.flags & ANTENNA_TX_DIVERSITY) + tx = (sample_a > sample_b) ? ANTENNA_A : ANTENNA_B; rt2x00lib_config_antenna(rt2x00dev, rx, tx); } @@ -293,7 +295,7 @@ static void rt2x00lib_evaluate_antenna_eval(struct rt2x00_dev *rt2x00dev) * sample the rssi from the other antenna to make a valid * comparison between the 2 antennas. */ - if ((rssi_curr - rssi_old) > -5 || (rssi_curr - rssi_old) < 5) + if (abs(rssi_curr - rssi_old) < 5) return; rt2x00dev->link.ant.flags |= ANTENNA_MODE_SAMPLE; @@ -319,15 +321,15 @@ static void rt2x00lib_evaluate_antenna(struct rt2x00_dev *rt2x00dev) rt2x00dev->link.ant.flags &= ~ANTENNA_TX_DIVERSITY; if (rt2x00dev->hw->conf.antenna_sel_rx == 0 && - rt2x00dev->default_ant.rx != ANTENNA_SW_DIVERSITY) + rt2x00dev->default_ant.rx == ANTENNA_SW_DIVERSITY) rt2x00dev->link.ant.flags |= ANTENNA_RX_DIVERSITY; if (rt2x00dev->hw->conf.antenna_sel_tx == 0 && - rt2x00dev->default_ant.tx != ANTENNA_SW_DIVERSITY) + rt2x00dev->default_ant.tx == ANTENNA_SW_DIVERSITY) rt2x00dev->link.ant.flags |= ANTENNA_TX_DIVERSITY; if (!(rt2x00dev->link.ant.flags & ANTENNA_RX_DIVERSITY) && !(rt2x00dev->link.ant.flags & ANTENNA_TX_DIVERSITY)) { - rt2x00dev->link.ant.flags &= ~ANTENNA_MODE_SAMPLE; + rt2x00dev->link.ant.flags = 0; return; } @@ -441,17 +443,18 @@ static void rt2x00lib_link_tuner(struct work_struct *work) rt2x00dev->ops->lib->link_tuner(rt2x00dev); /* - * Evaluate antenna setup. - */ - rt2x00lib_evaluate_antenna(rt2x00dev); - - /* * Precalculate a portion of the link signal which is * in based on the tx/rx success/failure counters. */ rt2x00lib_precalculate_link_signal(&rt2x00dev->link.qual); /* + * Evaluate antenna setup, make this the last step since this could + * possibly reset some statistics. + */ + rt2x00lib_evaluate_antenna(rt2x00dev); + + /* * Increase tuner counter, and reschedule the next link tuner run. */ rt2x00dev->link.count++; diff --git a/drivers/net/wireless/rt2x00/rt2x00reg.h b/drivers/net/wireless/rt2x00/rt2x00reg.h index 838421216da0..b1915dc7dda1 100644 --- a/drivers/net/wireless/rt2x00/rt2x00reg.h +++ b/drivers/net/wireless/rt2x00/rt2x00reg.h @@ -85,6 +85,8 @@ enum dev_state { STATE_RADIO_OFF, STATE_RADIO_RX_ON, STATE_RADIO_RX_OFF, + STATE_RADIO_RX_ON_LINK, + STATE_RADIO_RX_OFF_LINK, STATE_RADIO_IRQ_ON, STATE_RADIO_IRQ_OFF, }; diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c index b31f0c26c32b..93ea212fedd5 100644 --- a/drivers/net/wireless/rt2x00/rt61pci.c +++ b/drivers/net/wireless/rt2x00/rt61pci.c @@ -1482,8 +1482,12 @@ static int rt61pci_set_device_state(struct rt2x00_dev *rt2x00dev, rt61pci_disable_radio(rt2x00dev); break; case STATE_RADIO_RX_ON: + case STATE_RADIO_RX_ON_LINK: + rt61pci_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON); + break; case STATE_RADIO_RX_OFF: - rt61pci_toggle_rx(rt2x00dev, state); + case STATE_RADIO_RX_OFF_LINK: + rt61pci_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF); break; case STATE_DEEP_SLEEP: case STATE_SLEEP: @@ -2298,9 +2302,9 @@ static void rt61pci_configure_filter(struct ieee80211_hw *hw, * Apply some rules to the filters: * - Some filters imply different filters to be set. * - Some things we can't filter out at all. + * - Multicast filter seems to kill broadcast traffic so never use it. */ - if (mc_count) - *total_flags |= FIF_ALLMULTI; + *total_flags |= FIF_ALLMULTI; if (*total_flags & FIF_OTHER_BSS || *total_flags & FIF_PROMISC_IN_BSS) *total_flags |= FIF_PROMISC_IN_BSS | FIF_OTHER_BSS; diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c index 4d576ab3e7f9..8103d41a1543 100644 --- a/drivers/net/wireless/rt2x00/rt73usb.c +++ b/drivers/net/wireless/rt2x00/rt73usb.c @@ -1208,8 +1208,12 @@ static int rt73usb_set_device_state(struct rt2x00_dev *rt2x00dev, rt73usb_disable_radio(rt2x00dev); break; case STATE_RADIO_RX_ON: + case STATE_RADIO_RX_ON_LINK: + rt73usb_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON); + break; case STATE_RADIO_RX_OFF: - rt73usb_toggle_rx(rt2x00dev, state); + case STATE_RADIO_RX_OFF_LINK: + rt73usb_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF); break; case STATE_DEEP_SLEEP: case STATE_SLEEP: @@ -1865,9 +1869,9 @@ static void rt73usb_configure_filter(struct ieee80211_hw *hw, * Apply some rules to the filters: * - Some filters imply different filters to be set. * - Some things we can't filter out at all. + * - Multicast filter seems to kill broadcast traffic so never use it. */ - if (mc_count) - *total_flags |= FIF_ALLMULTI; + *total_flags |= FIF_ALLMULTI; if (*total_flags & FIF_OTHER_BSS || *total_flags & FIF_PROMISC_IN_BSS) *total_flags |= FIF_PROMISC_IN_BSS | FIF_OTHER_BSS; @@ -2094,6 +2098,7 @@ static struct usb_device_id rt73usb_device_table[] = { /* D-Link */ { USB_DEVICE(0x07d1, 0x3c03), USB_DEVICE_DATA(&rt73usb_ops) }, { USB_DEVICE(0x07d1, 0x3c04), USB_DEVICE_DATA(&rt73usb_ops) }, + { USB_DEVICE(0x07d1, 0x3c07), USB_DEVICE_DATA(&rt73usb_ops) }, /* Gemtek */ { USB_DEVICE(0x15a9, 0x0004), USB_DEVICE_DATA(&rt73usb_ops) }, /* Gigabyte */ diff --git a/drivers/parisc/Kconfig b/drivers/parisc/Kconfig index 1d3b84b4af3f..553a9905299a 100644 --- a/drivers/parisc/Kconfig +++ b/drivers/parisc/Kconfig @@ -103,6 +103,11 @@ config IOMMU_SBA depends on PCI_LBA default PCI_LBA +config IOMMU_HELPER + bool + depends on IOMMU_SBA || IOMMU_CCIO + default y + #config PCI_EPIC # bool "EPIC/SAGA PCI support" # depends on PCI diff --git a/drivers/parisc/ccio-dma.c b/drivers/parisc/ccio-dma.c index d08b284de196..62db3c3fe4dc 100644 --- a/drivers/parisc/ccio-dma.c +++ b/drivers/parisc/ccio-dma.c @@ -43,6 +43,7 @@ #include <linux/proc_fs.h> #include <linux/seq_file.h> #include <linux/scatterlist.h> +#include <linux/iommu-helper.h> #include <asm/byteorder.h> #include <asm/cache.h> /* for L1_CACHE_BYTES */ @@ -302,13 +303,17 @@ static int ioc_count; */ #define CCIO_SEARCH_LOOP(ioc, res_idx, mask, size) \ for(; res_ptr < res_end; ++res_ptr) { \ - if(0 == (*res_ptr & mask)) { \ - *res_ptr |= mask; \ - res_idx = (unsigned int)((unsigned long)res_ptr - (unsigned long)ioc->res_map); \ - ioc->res_hint = res_idx + (size >> 3); \ - goto resource_found; \ - } \ - } + int ret;\ + unsigned int idx;\ + idx = (unsigned int)((unsigned long)res_ptr - (unsigned long)ioc->res_map); \ + ret = iommu_is_span_boundary(idx << 3, pages_needed, 0, boundary_size);\ + if ((0 == (*res_ptr & mask)) && !ret) { \ + *res_ptr |= mask; \ + res_idx = idx;\ + ioc->res_hint = res_idx + (size >> 3); \ + goto resource_found; \ + } \ + } #define CCIO_FIND_FREE_MAPPING(ioa, res_idx, mask, size) \ u##size *res_ptr = (u##size *)&((ioc)->res_map[ioa->res_hint & ~((size >> 3) - 1)]); \ @@ -341,10 +346,11 @@ static int ioc_count; * of available pages for the requested size. */ static int -ccio_alloc_range(struct ioc *ioc, size_t size) +ccio_alloc_range(struct ioc *ioc, struct device *dev, size_t size) { unsigned int pages_needed = size >> IOVP_SHIFT; unsigned int res_idx; + unsigned long boundary_size; #ifdef CCIO_SEARCH_TIME unsigned long cr_start = mfctl(16); #endif @@ -360,6 +366,9 @@ ccio_alloc_range(struct ioc *ioc, size_t size) ** ggg sacrifices another 710 to the computer gods. */ + boundary_size = ALIGN((unsigned long long)dma_get_seg_boundary(dev) + 1, + 1ULL << IOVP_SHIFT) >> IOVP_SHIFT; + if (pages_needed <= 8) { /* * LAN traffic will not thrash the TLB IFF the same NIC @@ -760,7 +769,7 @@ ccio_map_single(struct device *dev, void *addr, size_t size, ioc->msingle_pages += size >> IOVP_SHIFT; #endif - idx = ccio_alloc_range(ioc, size); + idx = ccio_alloc_range(ioc, dev, size); iovp = (dma_addr_t)MKIOVP(idx); pdir_start = &(ioc->pdir_base[idx]); diff --git a/drivers/parisc/iommu-helpers.h b/drivers/parisc/iommu-helpers.h index 97ba8286c596..a9c46cc2db37 100644 --- a/drivers/parisc/iommu-helpers.h +++ b/drivers/parisc/iommu-helpers.h @@ -96,8 +96,8 @@ iommu_fill_pdir(struct ioc *ioc, struct scatterlist *startsg, int nents, static inline unsigned int iommu_coalesce_chunks(struct ioc *ioc, struct device *dev, - struct scatterlist *startsg, int nents, - int (*iommu_alloc_range)(struct ioc *, size_t)) + struct scatterlist *startsg, int nents, + int (*iommu_alloc_range)(struct ioc *, struct device *, size_t)) { struct scatterlist *contig_sg; /* contig chunk head */ unsigned long dma_offset, dma_len; /* start/len of DMA stream */ @@ -166,7 +166,7 @@ iommu_coalesce_chunks(struct ioc *ioc, struct device *dev, dma_len = ALIGN(dma_len + dma_offset, IOVP_SIZE); sg_dma_address(contig_sg) = PIDE_FLAG - | (iommu_alloc_range(ioc, dma_len) << IOVP_SHIFT) + | (iommu_alloc_range(ioc, dev, dma_len) << IOVP_SHIFT) | dma_offset; n_mappings++; } diff --git a/drivers/parisc/sba_iommu.c b/drivers/parisc/sba_iommu.c index d06627c3f353..bdbe780e21c5 100644 --- a/drivers/parisc/sba_iommu.c +++ b/drivers/parisc/sba_iommu.c @@ -29,6 +29,7 @@ #include <linux/string.h> #include <linux/pci.h> #include <linux/scatterlist.h> +#include <linux/iommu-helper.h> #include <asm/byteorder.h> #include <asm/io.h> @@ -313,6 +314,12 @@ sba_dump_sg( struct ioc *ioc, struct scatterlist *startsg, int nents) #define RESMAP_MASK(n) (~0UL << (BITS_PER_LONG - (n))) #define RESMAP_IDX_MASK (sizeof(unsigned long) - 1) +unsigned long ptr_to_pide(struct ioc *ioc, unsigned long *res_ptr, + unsigned int bitshiftcnt) +{ + return (((unsigned long)res_ptr - (unsigned long)ioc->res_map) << 3) + + bitshiftcnt; +} /** * sba_search_bitmap - find free space in IO PDIR resource bitmap @@ -324,19 +331,36 @@ sba_dump_sg( struct ioc *ioc, struct scatterlist *startsg, int nents) * Cool perf optimization: search for log2(size) bits at a time. */ static SBA_INLINE unsigned long -sba_search_bitmap(struct ioc *ioc, unsigned long bits_wanted) +sba_search_bitmap(struct ioc *ioc, struct device *dev, + unsigned long bits_wanted) { unsigned long *res_ptr = ioc->res_hint; unsigned long *res_end = (unsigned long *) &(ioc->res_map[ioc->res_size]); - unsigned long pide = ~0UL; + unsigned long pide = ~0UL, tpide; + unsigned long boundary_size; + unsigned long shift; + int ret; + + boundary_size = ALIGN((unsigned long long)dma_get_seg_boundary(dev) + 1, + 1ULL << IOVP_SHIFT) >> IOVP_SHIFT; + +#if defined(ZX1_SUPPORT) + BUG_ON(ioc->ibase & ~IOVP_MASK); + shift = ioc->ibase >> IOVP_SHIFT; +#else + shift = 0; +#endif if (bits_wanted > (BITS_PER_LONG/2)) { /* Search word at a time - no mask needed */ for(; res_ptr < res_end; ++res_ptr) { - if (*res_ptr == 0) { + tpide = ptr_to_pide(ioc, res_ptr, 0); + ret = iommu_is_span_boundary(tpide, bits_wanted, + shift, + boundary_size); + if ((*res_ptr == 0) && !ret) { *res_ptr = RESMAP_MASK(bits_wanted); - pide = ((unsigned long)res_ptr - (unsigned long)ioc->res_map); - pide <<= 3; /* convert to bit address */ + pide = tpide; break; } } @@ -365,11 +389,13 @@ sba_search_bitmap(struct ioc *ioc, unsigned long bits_wanted) { DBG_RES(" %p %lx %lx\n", res_ptr, mask, *res_ptr); WARN_ON(mask == 0); - if(((*res_ptr) & mask) == 0) { + tpide = ptr_to_pide(ioc, res_ptr, bitshiftcnt); + ret = iommu_is_span_boundary(tpide, bits_wanted, + shift, + boundary_size); + if ((((*res_ptr) & mask) == 0) && !ret) { *res_ptr |= mask; /* mark resources busy! */ - pide = ((unsigned long)res_ptr - (unsigned long)ioc->res_map); - pide <<= 3; /* convert to bit address */ - pide += bitshiftcnt; + pide = tpide; break; } mask >>= o; @@ -404,7 +430,7 @@ sba_search_bitmap(struct ioc *ioc, unsigned long bits_wanted) * resource bit map. */ static int -sba_alloc_range(struct ioc *ioc, size_t size) +sba_alloc_range(struct ioc *ioc, struct device *dev, size_t size) { unsigned int pages_needed = size >> IOVP_SHIFT; #ifdef SBA_COLLECT_STATS @@ -412,9 +438,9 @@ sba_alloc_range(struct ioc *ioc, size_t size) #endif unsigned long pide; - pide = sba_search_bitmap(ioc, pages_needed); + pide = sba_search_bitmap(ioc, dev, pages_needed); if (pide >= (ioc->res_size << 3)) { - pide = sba_search_bitmap(ioc, pages_needed); + pide = sba_search_bitmap(ioc, dev, pages_needed); if (pide >= (ioc->res_size << 3)) panic("%s: I/O MMU @ %p is out of mapping resources\n", __FILE__, ioc->ioc_hpa); @@ -710,7 +736,7 @@ sba_map_single(struct device *dev, void *addr, size_t size, ioc->msingle_calls++; ioc->msingle_pages += size >> IOVP_SHIFT; #endif - pide = sba_alloc_range(ioc, size); + pide = sba_alloc_range(ioc, dev, size); iovp = (dma_addr_t) pide << IOVP_SHIFT; DBG_RUN("%s() 0x%p -> 0x%lx\n", diff --git a/drivers/pci/bus.c b/drivers/pci/bus.c index ef5a6a245f5f..6a9403d79e0c 100644 --- a/drivers/pci/bus.c +++ b/drivers/pci/bus.c @@ -145,13 +145,15 @@ void pci_bus_add_devices(struct pci_bus *bus) child_bus = dev->subordinate; child_bus->dev.parent = child_bus->bridge; retval = device_register(&child_bus->dev); - if (!retval) + if (retval) + dev_err(&dev->dev, "Error registering pci_bus," + " continuing...\n"); + else retval = device_create_file(&child_bus->dev, &dev_attr_cpuaffinity); if (retval) - dev_err(&dev->dev, "Error registering pci_bus" - " device bridge symlink," - " continuing...\n"); + dev_err(&dev->dev, "Error creating cpuaffinity" + " file, continuing...\n"); } } } diff --git a/drivers/pci/hotplug-pci.c b/drivers/pci/hotplug-pci.c index a590ef682153..4d4a64478404 100644 --- a/drivers/pci/hotplug-pci.c +++ b/drivers/pci/hotplug-pci.c @@ -4,7 +4,7 @@ #include "pci.h" -unsigned int pci_do_scan_bus(struct pci_bus *bus) +unsigned int __devinit pci_do_scan_bus(struct pci_bus *bus) { unsigned int max; diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c index cf22f9e01e00..5e50008d1181 100644 --- a/drivers/pci/hotplug/acpiphp_glue.c +++ b/drivers/pci/hotplug/acpiphp_glue.c @@ -1085,7 +1085,7 @@ static int acpiphp_bus_trim(acpi_handle handle) * This function should be called per *physical slot*, * not per each slot object in ACPI namespace. */ -static int enable_device(struct acpiphp_slot *slot) +static int __ref enable_device(struct acpiphp_slot *slot) { struct pci_dev *dev; struct pci_bus *bus = slot->bridge->pci_bus; diff --git a/drivers/pci/hotplug/cpci_hotplug_pci.c b/drivers/pci/hotplug/cpci_hotplug_pci.c index 5e9be44817cb..b3515fc4cd38 100644 --- a/drivers/pci/hotplug/cpci_hotplug_pci.c +++ b/drivers/pci/hotplug/cpci_hotplug_pci.c @@ -250,7 +250,7 @@ int cpci_led_off(struct slot* slot) * Device configuration functions */ -int cpci_configure_slot(struct slot* slot) +int __ref cpci_configure_slot(struct slot *slot) { struct pci_bus *parent; int fn; diff --git a/drivers/pci/hotplug/ibmphp_ebda.c b/drivers/pci/hotplug/ibmphp_ebda.c index 600ed7b67ae7..bbccde9f228f 100644 --- a/drivers/pci/hotplug/ibmphp_ebda.c +++ b/drivers/pci/hotplug/ibmphp_ebda.c @@ -963,6 +963,7 @@ static int __init ebda_rsrc_controller (void) bus_info_ptr1 = ibmphp_find_same_bus_num (hpc_ptr->slots[index].slot_bus_num); if (!bus_info_ptr1) { + kfree(tmp_slot); rc = -ENODEV; goto error; } diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c index 6eba9b2cfb90..698975a6a21c 100644 --- a/drivers/pci/hotplug/pciehp_hpc.c +++ b/drivers/pci/hotplug/pciehp_hpc.c @@ -711,7 +711,8 @@ static int hpc_power_off_slot(struct slot * slot) retval = pcie_write_cmd(slot, slot_cmd, cmd_mask); if (retval) { err("%s: Write command failed!\n", __FUNCTION__); - return -1; + retval = -1; + goto out; } dbg("%s: SLOTCTRL %x write cmd %x\n", __FUNCTION__, ctrl->cap_base + SLOTCTRL, slot_cmd); @@ -722,7 +723,7 @@ static int hpc_power_off_slot(struct slot * slot) * removed from the slot/adapter. */ msleep(1000); - + out: if (changed) pcie_unmask_bad_dllp(ctrl); diff --git a/drivers/pci/hotplug/pciehp_pci.c b/drivers/pci/hotplug/pciehp_pci.c index dd50713966d1..9372a840b63d 100644 --- a/drivers/pci/hotplug/pciehp_pci.c +++ b/drivers/pci/hotplug/pciehp_pci.c @@ -167,7 +167,7 @@ static void program_fw_provided_values(struct pci_dev *dev) } } -static int pciehp_add_bridge(struct pci_dev *dev) +static int __ref pciehp_add_bridge(struct pci_dev *dev) { struct pci_bus *parent = dev->bus; int pass, busnr, start = parent->secondary; diff --git a/drivers/pci/hotplug/shpchp_pci.c b/drivers/pci/hotplug/shpchp_pci.c index 0a6b25ef194c..a69a21520895 100644 --- a/drivers/pci/hotplug/shpchp_pci.c +++ b/drivers/pci/hotplug/shpchp_pci.c @@ -96,7 +96,7 @@ static void program_fw_provided_values(struct pci_dev *dev) } } -int shpchp_configure_device(struct slot *p_slot) +int __ref shpchp_configure_device(struct slot *p_slot) { struct pci_dev *dev; struct pci_bus *parent = p_slot->ctrl->pci_dev->subordinate; diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index 4d23b9fb551b..2db2e4bb0d1e 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -286,7 +286,7 @@ static void pci_read_bases(struct pci_dev *dev, unsigned int howmany, int rom) } } -void pci_read_bridge_bases(struct pci_bus *child) +void __devinit pci_read_bridge_bases(struct pci_bus *child) { struct pci_dev *dev = child->self; u8 io_base_lo, io_limit_lo; @@ -472,7 +472,7 @@ static void pci_fixup_parent_subordinate_busnr(struct pci_bus *child, int max) * them, we proceed to assigning numbers to the remaining buses in * order to avoid overlaps between old and new bus numbers. */ -int pci_scan_bridge(struct pci_bus *bus, struct pci_dev * dev, int max, int pass) +int __devinit pci_scan_bridge(struct pci_bus *bus, struct pci_dev *dev, int max, int pass) { struct pci_bus *child; int is_cardbus = (dev->hdr_type == PCI_HEADER_TYPE_CARDBUS); @@ -1008,7 +1008,7 @@ int pci_scan_slot(struct pci_bus *bus, int devfn) return nr; } -unsigned int pci_scan_child_bus(struct pci_bus *bus) +unsigned int __devinit pci_scan_child_bus(struct pci_bus *bus) { unsigned int devfn, pass, max = bus->secondary; struct pci_dev *dev; @@ -1116,7 +1116,7 @@ err_out: return NULL; } -struct pci_bus *pci_scan_bus_parented(struct device *parent, +struct pci_bus * __devinit pci_scan_bus_parented(struct device *parent, int bus, struct pci_ops *ops, void *sysdata) { struct pci_bus *b; diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index bbad4a9f264f..e9a333d98552 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -1652,9 +1652,8 @@ static void __devinit quirk_via_cx700_pci_parking_caching(struct pci_dev *dev) pci_write_config_byte(dev, 0x75, 0x1); pci_write_config_byte(dev, 0x77, 0x0); - printk(KERN_INFO - "PCI: VIA CX700 PCI parking/caching fixup on %s\n", - pci_name(dev)); + dev_info(&dev->dev, + "Disabling VIA CX700 PCI parking/caching\n"); } } } @@ -1726,32 +1725,6 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT2 quirk_msi_ht_cap); -/* - * Force enable MSI mapping capability on HT bridges - */ -static void __devinit quirk_msi_ht_cap_enable(struct pci_dev *dev) -{ - int pos, ttl = 48; - - pos = pci_find_ht_capability(dev, HT_CAPTYPE_MSI_MAPPING); - while (pos && ttl--) { - u8 flags; - - if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS, &flags) == 0) { - printk(KERN_INFO "PCI: Enabling HT MSI Mapping on %s\n", - pci_name(dev)); - - pci_write_config_byte(dev, pos + HT_MSI_FLAGS, - flags | HT_MSI_FLAGS_ENABLE); - } - pos = pci_find_next_ht_capability(dev, pos, - HT_CAPTYPE_MSI_MAPPING); - } -} -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SERVERWORKS, - PCI_DEVICE_ID_SERVERWORKS_HT1000_PXB, - quirk_msi_ht_cap_enable); - /* The nVidia CK804 chipset may have 2 HT MSI mappings. * MSI are supported if the MSI capability set in any of these mappings. */ @@ -1778,9 +1751,8 @@ static void __devinit quirk_nvidia_ck804_msi_ht_cap(struct pci_dev *dev) DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_CK804_PCIE, quirk_nvidia_ck804_msi_ht_cap); -/* - * Force enable MSI mapping capability on HT bridges */ -static inline void ht_enable_msi_mapping(struct pci_dev *dev) +/* Force enable MSI mapping capability on HT bridges */ +static void __devinit ht_enable_msi_mapping(struct pci_dev *dev) { int pos, ttl = 48; @@ -1799,6 +1771,9 @@ static inline void ht_enable_msi_mapping(struct pci_dev *dev) HT_CAPTYPE_MSI_MAPPING); } } +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SERVERWORKS, + PCI_DEVICE_ID_SERVERWORKS_HT1000_PXB, + ht_enable_msi_mapping); static void __devinit nv_msi_ht_cap_quirk(struct pci_dev *dev) { @@ -1830,7 +1805,7 @@ static void __devinit nv_msi_ht_cap_quirk(struct pci_dev *dev) if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS, &flags) == 0) { - dev_info(&dev->dev, "Quirk disabling HT MSI mapping"); + dev_info(&dev->dev, "Disabling HT MSI mapping"); pci_write_config_byte(dev, pos + HT_MSI_FLAGS, flags & ~HT_MSI_FLAGS_ENABLE); } diff --git a/drivers/pci/rom.c b/drivers/pci/rom.c index a98b2470b9ea..bd5c0e031398 100644 --- a/drivers/pci/rom.c +++ b/drivers/pci/rom.c @@ -242,8 +242,7 @@ void pci_remove_rom(struct pci_dev *pdev) #endif /* 0 */ /** - * pci_cleanup_rom - internal routine for freeing the ROM copy created - * by pci_map_rom_copy called from remove.c + * pci_cleanup_rom - free the ROM copy created by pci_map_rom_copy * @pdev: pointer to pci device struct * * Free the copied ROM if we allocated one. diff --git a/drivers/pnp/quirks.c b/drivers/pnp/quirks.c index 4065139753b6..37993206ae5d 100644 --- a/drivers/pnp/quirks.c +++ b/drivers/pnp/quirks.c @@ -17,7 +17,6 @@ #include <linux/slab.h> #include <linux/pnp.h> #include <linux/io.h> -#include <linux/dmi.h> #include <linux/kallsyms.h> #include "base.h" @@ -109,42 +108,73 @@ static void quirk_sb16audio_resources(struct pnp_dev *dev) "pnp: SB audio device quirk - increasing port range\n"); } -static void quirk_supermicro_h8dce_system(struct pnp_dev *dev) + +#include <linux/pci.h> + +static void quirk_system_pci_resources(struct pnp_dev *dev) { - int i; - static struct dmi_system_id supermicro_h8dce[] = { - { - .ident = "Supermicro H8DCE", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Supermicro"), - DMI_MATCH(DMI_PRODUCT_NAME, "H8DCE"), - }, - }, - { } - }; - - if (!dmi_check_system(supermicro_h8dce)) - return; + struct pci_dev *pdev = NULL; + resource_size_t pnp_start, pnp_end, pci_start, pci_end; + int i, j; /* - * On the Supermicro H8DCE, there's a system device with resources - * that overlap BAR 6 of the built-in SATA PCI adapter. If the PNP - * system device claims them, the sata_nv driver won't be able to. - * More details at: - * https://bugzilla.redhat.com/show_bug.cgi?id=280641 - * https://bugzilla.redhat.com/show_bug.cgi?id=313491 - * http://lkml.org/lkml/2008/1/9/449 - * http://thread.gmane.org/gmane.linux.acpi.devel/27312 + * Some BIOSes have PNP motherboard devices with resources that + * partially overlap PCI BARs. The PNP system driver claims these + * motherboard resources, which prevents the normal PCI driver from + * requesting them later. + * + * This patch disables the PNP resources that conflict with PCI BARs + * so they won't be claimed by the PNP system driver. */ - for (i = 0; i < PNP_MAX_MEM; i++) { - if (pnp_mem_valid(dev, i) && pnp_mem_len(dev, i) && - (pnp_mem_start(dev, i) & 0xdfef0000) == 0xdfef0000) { - dev_warn(&dev->dev, "disabling 0x%llx-0x%llx to prevent" - " conflict with sata_nv PCI device\n", - (unsigned long long) pnp_mem_start(dev, i), - (unsigned long long) (pnp_mem_start(dev, i) + - pnp_mem_len(dev, i) - 1)); - pnp_mem_flags(dev, i) = 0; + for_each_pci_dev(pdev) { + for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) { + if (!(pci_resource_flags(pdev, i) & IORESOURCE_MEM) || + pci_resource_len(pdev, i) == 0) + continue; + + pci_start = pci_resource_start(pdev, i); + pci_end = pci_resource_end(pdev, i); + for (j = 0; j < PNP_MAX_MEM; j++) { + if (!pnp_mem_valid(dev, j) || + pnp_mem_len(dev, j) == 0) + continue; + + pnp_start = pnp_mem_start(dev, j); + pnp_end = pnp_mem_end(dev, j); + + /* + * If the PNP region doesn't overlap the PCI + * region at all, there's no problem. + */ + if (pnp_end < pci_start || pnp_start > pci_end) + continue; + + /* + * If the PNP region completely encloses (or is + * at least as large as) the PCI region, that's + * also OK. For example, this happens when the + * PNP device describes a bridge with PCI + * behind it. + */ + if (pnp_start <= pci_start && + pnp_end >= pci_end) + continue; + + /* + * Otherwise, the PNP region overlaps *part* of + * the PCI region, and that might prevent a PCI + * driver from requesting its resources. + */ + dev_warn(&dev->dev, "mem resource " + "(0x%llx-0x%llx) overlaps %s BAR %d " + "(0x%llx-0x%llx), disabling\n", + (unsigned long long) pnp_start, + (unsigned long long) pnp_end, + pci_name(pdev), i, + (unsigned long long) pci_start, + (unsigned long long) pci_end); + pnp_mem_flags(dev, j) = 0; + } } } } @@ -169,8 +199,8 @@ static struct pnp_fixup pnp_fixups[] = { {"CTL0043", quirk_sb16audio_resources}, {"CTL0044", quirk_sb16audio_resources}, {"CTL0045", quirk_sb16audio_resources}, - {"PNP0c01", quirk_supermicro_h8dce_system}, - {"PNP0c02", quirk_supermicro_h8dce_system}, + {"PNP0c01", quirk_system_pci_resources}, + {"PNP0c02", quirk_system_pci_resources}, {""} }; diff --git a/drivers/rapidio/rio-driver.c b/drivers/rapidio/rio-driver.c index 5480119ff9d3..3ce9f3defc12 100644 --- a/drivers/rapidio/rio-driver.c +++ b/drivers/rapidio/rio-driver.c @@ -78,8 +78,7 @@ void rio_dev_put(struct rio_dev *rdev) } /** - * rio_device_probe - Tell if a RIO device structure has a matching RIO - * device id structure + * rio_device_probe - Tell if a RIO device structure has a matching RIO device id structure * @id: the RIO device id structure to match against * @dev: the RIO device structure to match against * @@ -137,7 +136,7 @@ static int rio_device_remove(struct device *dev) * rio_register_driver - register a new RIO driver * @rdrv: the RIO driver structure to register * - * Adds a &struct rio_driver to the list of registered drivers + * Adds a &struct rio_driver to the list of registered drivers. * Returns a negative value on error, otherwise 0. If no error * occurred, the driver remains registered even if no device * was claimed during registration. @@ -167,8 +166,7 @@ void rio_unregister_driver(struct rio_driver *rdrv) } /** - * rio_match_bus - Tell if a RIO device structure has a matching RIO - * driver device id structure + * rio_match_bus - Tell if a RIO device structure has a matching RIO driver device id structure * @dev: the standard device structure to match against * @drv: the standard driver structure containing the ids to match against * diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index 6402d699072b..82f5ad9c3af4 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -250,6 +250,15 @@ config RTC_DRV_TWL92330 platforms. The support is integrated with the rest of the Menelaus driver; it's not separate module. +config RTC_DRV_S35390A + tristate "Seiko Instruments S-35390A" + help + If you say yes here you will get support for the Seiko + Instruments S-35390A. + + This driver can also be built as a module. If so the module + will be called rtc-s35390a. + endif # I2C comment "SPI RTC drivers" diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile index ec703f34ab86..872f1218ff9f 100644 --- a/drivers/rtc/Makefile +++ b/drivers/rtc/Makefile @@ -45,6 +45,7 @@ obj-$(CONFIG_RTC_DRV_R9701) += rtc-r9701.o obj-$(CONFIG_RTC_DRV_RS5C313) += rtc-rs5c313.o obj-$(CONFIG_RTC_DRV_RS5C348) += rtc-rs5c348.o obj-$(CONFIG_RTC_DRV_RS5C372) += rtc-rs5c372.o +obj-$(CONFIG_RTC_DRV_S35390A) += rtc-s35390a.o obj-$(CONFIG_RTC_DRV_S3C) += rtc-s3c.o obj-$(CONFIG_RTC_DRV_SA1100) += rtc-sa1100.o obj-$(CONFIG_RTC_DRV_SH) += rtc-sh.o diff --git a/drivers/rtc/rtc-s35390a.c b/drivers/rtc/rtc-s35390a.c new file mode 100644 index 000000000000..e8abc90c32c5 --- /dev/null +++ b/drivers/rtc/rtc-s35390a.c @@ -0,0 +1,316 @@ +/* + * Seiko Instruments S-35390A RTC Driver + * + * Copyright (c) 2007 Byron Bradley + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <linux/module.h> +#include <linux/rtc.h> +#include <linux/i2c.h> +#include <linux/bitrev.h> +#include <linux/bcd.h> +#include <linux/slab.h> + +#define S35390A_CMD_STATUS1 0 +#define S35390A_CMD_STATUS2 1 +#define S35390A_CMD_TIME1 2 + +#define S35390A_BYTE_YEAR 0 +#define S35390A_BYTE_MONTH 1 +#define S35390A_BYTE_DAY 2 +#define S35390A_BYTE_WDAY 3 +#define S35390A_BYTE_HOURS 4 +#define S35390A_BYTE_MINS 5 +#define S35390A_BYTE_SECS 6 + +#define S35390A_FLAG_POC 0x01 +#define S35390A_FLAG_BLD 0x02 +#define S35390A_FLAG_24H 0x40 +#define S35390A_FLAG_RESET 0x80 +#define S35390A_FLAG_TEST 0x01 + +struct s35390a { + struct i2c_client *client[8]; + struct rtc_device *rtc; + int twentyfourhour; +}; + +static int s35390a_set_reg(struct s35390a *s35390a, int reg, char *buf, int len) +{ + struct i2c_client *client = s35390a->client[reg]; + struct i2c_msg msg[] = { + { client->addr, 0, len, buf }, + }; + + if ((i2c_transfer(client->adapter, msg, 1)) != 1) + return -EIO; + + return 0; +} + +static int s35390a_get_reg(struct s35390a *s35390a, int reg, char *buf, int len) +{ + struct i2c_client *client = s35390a->client[reg]; + struct i2c_msg msg[] = { + { client->addr, I2C_M_RD, len, buf }, + }; + + if ((i2c_transfer(client->adapter, msg, 1)) != 1) + return -EIO; + + return 0; +} + +static int s35390a_reset(struct s35390a *s35390a) +{ + char buf[1]; + + if (s35390a_get_reg(s35390a, S35390A_CMD_STATUS1, buf, sizeof(buf)) < 0) + return -EIO; + + if (!(buf[0] & (S35390A_FLAG_POC | S35390A_FLAG_BLD))) + return 0; + + buf[0] |= (S35390A_FLAG_RESET | S35390A_FLAG_24H); + buf[0] &= 0xf0; + return s35390a_set_reg(s35390a, S35390A_CMD_STATUS1, buf, sizeof(buf)); +} + +static int s35390a_disable_test_mode(struct s35390a *s35390a) +{ + char buf[1]; + + if (s35390a_get_reg(s35390a, S35390A_CMD_STATUS2, buf, sizeof(buf)) < 0) + return -EIO; + + if (!(buf[0] & S35390A_FLAG_TEST)) + return 0; + + buf[0] &= ~S35390A_FLAG_TEST; + return s35390a_set_reg(s35390a, S35390A_CMD_STATUS2, buf, sizeof(buf)); +} + +static char s35390a_hr2reg(struct s35390a *s35390a, int hour) +{ + if (s35390a->twentyfourhour) + return BIN2BCD(hour); + + if (hour < 12) + return BIN2BCD(hour); + + return 0x40 | BIN2BCD(hour - 12); +} + +static int s35390a_reg2hr(struct s35390a *s35390a, char reg) +{ + unsigned hour; + + if (s35390a->twentyfourhour) + return BCD2BIN(reg & 0x3f); + + hour = BCD2BIN(reg & 0x3f); + if (reg & 0x40) + hour += 12; + + return hour; +} + +static int s35390a_set_datetime(struct i2c_client *client, struct rtc_time *tm) +{ + struct s35390a *s35390a = i2c_get_clientdata(client); + int i, err; + char buf[7]; + + dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d mday=%d, " + "mon=%d, year=%d, wday=%d\n", __func__, tm->tm_sec, + tm->tm_min, tm->tm_hour, tm->tm_mday, tm->tm_mon, tm->tm_year, + tm->tm_wday); + + buf[S35390A_BYTE_YEAR] = BIN2BCD(tm->tm_year - 100); + buf[S35390A_BYTE_MONTH] = BIN2BCD(tm->tm_mon + 1); + buf[S35390A_BYTE_DAY] = BIN2BCD(tm->tm_mday); + buf[S35390A_BYTE_WDAY] = BIN2BCD(tm->tm_wday); + buf[S35390A_BYTE_HOURS] = s35390a_hr2reg(s35390a, tm->tm_hour); + buf[S35390A_BYTE_MINS] = BIN2BCD(tm->tm_min); + buf[S35390A_BYTE_SECS] = BIN2BCD(tm->tm_sec); + + /* This chip expects the bits of each byte to be in reverse order */ + for (i = 0; i < 7; ++i) + buf[i] = bitrev8(buf[i]); + + err = s35390a_set_reg(s35390a, S35390A_CMD_TIME1, buf, sizeof(buf)); + + return err; +} + +static int s35390a_get_datetime(struct i2c_client *client, struct rtc_time *tm) +{ + struct s35390a *s35390a = i2c_get_clientdata(client); + char buf[7]; + int i, err; + + err = s35390a_get_reg(s35390a, S35390A_CMD_TIME1, buf, sizeof(buf)); + if (err < 0) + return err; + + /* This chip returns the bits of each byte in reverse order */ + for (i = 0; i < 7; ++i) + buf[i] = bitrev8(buf[i]); + + tm->tm_sec = BCD2BIN(buf[S35390A_BYTE_SECS]); + tm->tm_min = BCD2BIN(buf[S35390A_BYTE_MINS]); + tm->tm_hour = s35390a_reg2hr(s35390a, buf[S35390A_BYTE_HOURS]); + tm->tm_wday = BCD2BIN(buf[S35390A_BYTE_WDAY]); + tm->tm_mday = BCD2BIN(buf[S35390A_BYTE_DAY]); + tm->tm_mon = BCD2BIN(buf[S35390A_BYTE_MONTH]) - 1; + tm->tm_year = BCD2BIN(buf[S35390A_BYTE_YEAR]) + 100; + + dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, mday=%d, " + "mon=%d, year=%d, wday=%d\n", __func__, tm->tm_sec, + tm->tm_min, tm->tm_hour, tm->tm_mday, tm->tm_mon, tm->tm_year, + tm->tm_wday); + + return rtc_valid_tm(tm); +} + +static int s35390a_rtc_read_time(struct device *dev, struct rtc_time *tm) +{ + return s35390a_get_datetime(to_i2c_client(dev), tm); +} + +static int s35390a_rtc_set_time(struct device *dev, struct rtc_time *tm) +{ + return s35390a_set_datetime(to_i2c_client(dev), tm); +} + +static const struct rtc_class_ops s35390a_rtc_ops = { + .read_time = s35390a_rtc_read_time, + .set_time = s35390a_rtc_set_time, +}; + +static struct i2c_driver s35390a_driver; + +static int s35390a_probe(struct i2c_client *client) +{ + int err; + unsigned int i; + struct s35390a *s35390a; + struct rtc_time tm; + char buf[1]; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { + err = -ENODEV; + goto exit; + } + + s35390a = kzalloc(sizeof(struct s35390a), GFP_KERNEL); + if (!s35390a) { + err = -ENOMEM; + goto exit; + } + + s35390a->client[0] = client; + i2c_set_clientdata(client, s35390a); + + /* This chip uses multiple addresses, use dummy devices for them */ + for (i = 1; i < 8; ++i) { + s35390a->client[i] = i2c_new_dummy(client->adapter, + client->addr + i, "rtc-s35390a"); + if (!s35390a->client[i]) { + dev_err(&client->dev, "Address %02x unavailable\n", + client->addr + i); + err = -EBUSY; + goto exit_dummy; + } + } + + err = s35390a_reset(s35390a); + if (err < 0) { + dev_err(&client->dev, "error resetting chip\n"); + goto exit_dummy; + } + + err = s35390a_disable_test_mode(s35390a); + if (err < 0) { + dev_err(&client->dev, "error disabling test mode\n"); + goto exit_dummy; + } + + err = s35390a_get_reg(s35390a, S35390A_CMD_STATUS1, buf, sizeof(buf)); + if (err < 0) { + dev_err(&client->dev, "error checking 12/24 hour mode\n"); + goto exit_dummy; + } + if (buf[0] & S35390A_FLAG_24H) + s35390a->twentyfourhour = 1; + else + s35390a->twentyfourhour = 0; + + if (s35390a_get_datetime(client, &tm) < 0) + dev_warn(&client->dev, "clock needs to be set\n"); + + s35390a->rtc = rtc_device_register(s35390a_driver.driver.name, + &client->dev, &s35390a_rtc_ops, THIS_MODULE); + + if (IS_ERR(s35390a->rtc)) { + err = PTR_ERR(s35390a->rtc); + goto exit_dummy; + } + return 0; + +exit_dummy: + for (i = 1; i < 8; ++i) + if (s35390a->client[i]) + i2c_unregister_device(s35390a->client[i]); + kfree(s35390a); + i2c_set_clientdata(client, NULL); + +exit: + return err; +} + +static int s35390a_remove(struct i2c_client *client) +{ + unsigned int i; + + struct s35390a *s35390a = i2c_get_clientdata(client); + for (i = 1; i < 8; ++i) + if (s35390a->client[i]) + i2c_unregister_device(s35390a->client[i]); + + rtc_device_unregister(s35390a->rtc); + kfree(s35390a); + i2c_set_clientdata(client, NULL); + + return 0; +} + +static struct i2c_driver s35390a_driver = { + .driver = { + .name = "rtc-s35390a", + }, + .probe = s35390a_probe, + .remove = s35390a_remove, +}; + +static int __init s35390a_rtc_init(void) +{ + return i2c_add_driver(&s35390a_driver); +} + +static void __exit s35390a_rtc_exit(void) +{ + i2c_del_driver(&s35390a_driver); +} + +MODULE_AUTHOR("Byron Bradley <byron.bbradley@gmail.com>"); +MODULE_DESCRIPTION("S35390A RTC driver"); +MODULE_LICENSE("GPL"); + +module_init(s35390a_rtc_init); +module_exit(s35390a_rtc_exit); diff --git a/drivers/s390/block/dasd_3990_erp.c b/drivers/s390/block/dasd_3990_erp.c index f69714a0e9e7..b19db20a0bef 100644 --- a/drivers/s390/block/dasd_3990_erp.c +++ b/drivers/s390/block/dasd_3990_erp.c @@ -2310,10 +2310,8 @@ static int dasd_3990_erp_error_match(struct dasd_ccw_req *cqr1, struct dasd_ccw_req *cqr2) { - /* check failed CCW */ - if (cqr1->irb.scsw.cpa != cqr2->irb.scsw.cpa) { - // return 0; /* CCW doesn't match */ - } + if (cqr1->startdev != cqr2->startdev) + return 0; if (cqr1->irb.esw.esw0.erw.cons != cqr2->irb.esw.esw0.erw.cons) return 0; diff --git a/drivers/s390/block/dasd_proc.c b/drivers/s390/block/dasd_proc.c index 28a86f070048..556063e8f7a9 100644 --- a/drivers/s390/block/dasd_proc.c +++ b/drivers/s390/block/dasd_proc.c @@ -62,8 +62,10 @@ dasd_devices_show(struct seq_file *m, void *v) return 0; if (device->block) block = device->block; - else + else { + dasd_put_device(device); return 0; + } /* Print device number. */ seq_printf(m, "%s", device->cdev->dev.bus_id); /* Print discipline string. */ diff --git a/drivers/s390/char/defkeymap.c b/drivers/s390/char/defkeymap.c index 389346cda6c8..07c7f31081bc 100644 --- a/drivers/s390/char/defkeymap.c +++ b/drivers/s390/char/defkeymap.c @@ -151,8 +151,8 @@ char *func_table[MAX_NR_FUNC] = { }; struct kbdiacruc accent_table[MAX_DIACR] = { - {'^', 'c', '\003'}, {'^', 'd', '\004'}, - {'^', 'z', '\032'}, {'^', '\012', '\000'}, + {'^', 'c', 0003}, {'^', 'd', 0004}, + {'^', 'z', 0032}, {'^', 0012, 0000}, }; unsigned int accent_table_size = 4; diff --git a/drivers/s390/char/sclp_vt220.c b/drivers/s390/char/sclp_vt220.c index 92f527201792..f7b258dfd52c 100644 --- a/drivers/s390/char/sclp_vt220.c +++ b/drivers/s390/char/sclp_vt220.c @@ -367,7 +367,7 @@ sclp_vt220_timeout(unsigned long data) sclp_vt220_emit_current(); } -#define BUFFER_MAX_DELAY HZ/2 +#define BUFFER_MAX_DELAY HZ/20 /* * Internal implementation of the write function. Write COUNT bytes of data diff --git a/drivers/s390/crypto/ap_bus.c b/drivers/s390/crypto/ap_bus.c index d0c6fd3b1c19..7b0b81901297 100644 --- a/drivers/s390/crypto/ap_bus.c +++ b/drivers/s390/crypto/ap_bus.c @@ -490,10 +490,12 @@ static int ap_device_probe(struct device *dev) int rc; ap_dev->drv = ap_drv; - spin_lock_bh(&ap_device_lock); - list_add(&ap_dev->list, &ap_device_list); - spin_unlock_bh(&ap_device_lock); rc = ap_drv->probe ? ap_drv->probe(ap_dev) : -ENODEV; + if (!rc) { + spin_lock_bh(&ap_device_lock); + list_add(&ap_dev->list, &ap_device_list); + spin_unlock_bh(&ap_device_lock); + } return rc; } @@ -532,11 +534,11 @@ static int ap_device_remove(struct device *dev) ap_flush_queue(ap_dev); del_timer_sync(&ap_dev->timeout); - if (ap_drv->remove) - ap_drv->remove(ap_dev); spin_lock_bh(&ap_device_lock); list_del_init(&ap_dev->list); spin_unlock_bh(&ap_device_lock); + if (ap_drv->remove) + ap_drv->remove(ap_dev); spin_lock_bh(&ap_dev->lock); atomic_sub(ap_dev->queue_count, &ap_poll_requests); spin_unlock_bh(&ap_dev->lock); diff --git a/drivers/s390/net/claw.c b/drivers/s390/net/claw.c index c3076217871e..d8a5c229c5a7 100644 --- a/drivers/s390/net/claw.c +++ b/drivers/s390/net/claw.c @@ -1851,8 +1851,7 @@ claw_hw_tx(struct sk_buff *skb, struct net_device *dev, long linkid) } } /* See how many write buffers are required to hold this data */ - numBuffers= ( skb->len + privptr->p_env->write_size - 1) / - ( privptr->p_env->write_size); + numBuffers = DIV_ROUND_UP(skb->len, privptr->p_env->write_size); /* If that number of buffers isn't available, give up for now */ if (privptr->write_free_count < numBuffers || @@ -2114,8 +2113,7 @@ init_ccw_bk(struct net_device *dev) */ ccw_blocks_perpage= PAGE_SIZE / CCWBK_SIZE; ccw_pages_required= - (ccw_blocks_required+ccw_blocks_perpage -1) / - ccw_blocks_perpage; + DIV_ROUND_UP(ccw_blocks_required, ccw_blocks_perpage); #ifdef DEBUGMSG printk(KERN_INFO "%s: %s() > ccw_blocks_perpage=%d\n", @@ -2131,30 +2129,29 @@ init_ccw_bk(struct net_device *dev) * provide good performance. With packing buffers support 32k * buffers are used. */ - if (privptr->p_env->read_size < PAGE_SIZE) { - claw_reads_perpage= PAGE_SIZE / privptr->p_env->read_size; - claw_read_pages= (privptr->p_env->read_buffers + - claw_reads_perpage -1) / claw_reads_perpage; + if (privptr->p_env->read_size < PAGE_SIZE) { + claw_reads_perpage = PAGE_SIZE / privptr->p_env->read_size; + claw_read_pages = DIV_ROUND_UP(privptr->p_env->read_buffers, + claw_reads_perpage); } else { /* > or equal */ - privptr->p_buff_pages_perread= - (privptr->p_env->read_size + PAGE_SIZE - 1) / PAGE_SIZE; - claw_read_pages= - privptr->p_env->read_buffers * privptr->p_buff_pages_perread; + privptr->p_buff_pages_perread = + DIV_ROUND_UP(privptr->p_env->read_size, PAGE_SIZE); + claw_read_pages = privptr->p_env->read_buffers * + privptr->p_buff_pages_perread; } if (privptr->p_env->write_size < PAGE_SIZE) { - claw_writes_perpage= - PAGE_SIZE / privptr->p_env->write_size; - claw_write_pages= - (privptr->p_env->write_buffers + claw_writes_perpage -1) / - claw_writes_perpage; + claw_writes_perpage = + PAGE_SIZE / privptr->p_env->write_size; + claw_write_pages = DIV_ROUND_UP(privptr->p_env->write_buffers, + claw_writes_perpage); } else { /* > or equal */ - privptr->p_buff_pages_perwrite= - (privptr->p_env->read_size + PAGE_SIZE - 1) / PAGE_SIZE; - claw_write_pages= - privptr->p_env->write_buffers * privptr->p_buff_pages_perwrite; + privptr->p_buff_pages_perwrite = + DIV_ROUND_UP(privptr->p_env->read_size, PAGE_SIZE); + claw_write_pages = privptr->p_env->write_buffers * + privptr->p_buff_pages_perwrite; } #ifdef DEBUGMSG if (privptr->p_env->read_size < PAGE_SIZE) { diff --git a/drivers/scsi/aic94xx/aic94xx.h b/drivers/scsi/aic94xx/aic94xx.h index 32f513b1b78a..eb8efdcefe48 100644 --- a/drivers/scsi/aic94xx/aic94xx.h +++ b/drivers/scsi/aic94xx/aic94xx.h @@ -102,6 +102,7 @@ int asd_abort_task_set(struct domain_device *, u8 *lun); int asd_clear_aca(struct domain_device *, u8 *lun); int asd_clear_task_set(struct domain_device *, u8 *lun); int asd_lu_reset(struct domain_device *, u8 *lun); +int asd_I_T_nexus_reset(struct domain_device *dev); int asd_query_task(struct sas_task *); /* ---------- Adapter and Port management ---------- */ diff --git a/drivers/scsi/aic94xx/aic94xx_hwi.h b/drivers/scsi/aic94xx/aic94xx_hwi.h index 150f6706d23f..abc757559c1a 100644 --- a/drivers/scsi/aic94xx/aic94xx_hwi.h +++ b/drivers/scsi/aic94xx/aic94xx_hwi.h @@ -140,7 +140,7 @@ struct asd_ascb { /* internally generated command */ struct timer_list timer; - struct completion completion; + struct completion *completion; u8 tag_valid:1; __be16 tag; /* error recovery only */ @@ -294,7 +294,6 @@ static inline void asd_init_ascb(struct asd_ha_struct *asd_ha, ascb->timer.function = NULL; init_timer(&ascb->timer); ascb->tc_index = -1; - init_completion(&ascb->completion); } /* Must be called with the tc_index_lock held! diff --git a/drivers/scsi/aic94xx/aic94xx_init.c b/drivers/scsi/aic94xx/aic94xx_init.c index 5d761eb67442..88d1e731b65e 100644 --- a/drivers/scsi/aic94xx/aic94xx_init.c +++ b/drivers/scsi/aic94xx/aic94xx_init.c @@ -1003,7 +1003,7 @@ static struct sas_domain_function_template aic94xx_transport_functions = { .lldd_abort_task_set = asd_abort_task_set, .lldd_clear_aca = asd_clear_aca, .lldd_clear_task_set = asd_clear_task_set, - .lldd_I_T_nexus_reset = NULL, + .lldd_I_T_nexus_reset = asd_I_T_nexus_reset, .lldd_lu_reset = asd_lu_reset, .lldd_query_task = asd_query_task, diff --git a/drivers/scsi/aic94xx/aic94xx_task.c b/drivers/scsi/aic94xx/aic94xx_task.c index 965d4bb999d9..008df9ab92a5 100644 --- a/drivers/scsi/aic94xx/aic94xx_task.c +++ b/drivers/scsi/aic94xx/aic94xx_task.c @@ -343,11 +343,13 @@ Again: task->task_state_flags &= ~SAS_TASK_AT_INITIATOR; task->task_state_flags |= SAS_TASK_STATE_DONE; if (unlikely((task->task_state_flags & SAS_TASK_STATE_ABORTED))) { + struct completion *completion = ascb->completion; spin_unlock_irqrestore(&task->task_state_lock, flags); ASD_DPRINTK("task 0x%p done with opcode 0x%x resp 0x%x " "stat 0x%x but aborted by upper layer!\n", task, opcode, ts->resp, ts->stat); - complete(&ascb->completion); + if (completion) + complete(completion); } else { spin_unlock_irqrestore(&task->task_state_lock, flags); task->lldd_task = NULL; diff --git a/drivers/scsi/aic94xx/aic94xx_tmf.c b/drivers/scsi/aic94xx/aic94xx_tmf.c index 144f5ad20453..b9ac8f703a1d 100644 --- a/drivers/scsi/aic94xx/aic94xx_tmf.c +++ b/drivers/scsi/aic94xx/aic94xx_tmf.c @@ -53,50 +53,64 @@ static int asd_enqueue_internal(struct asd_ascb *ascb, return res; } -static inline void asd_timedout_common(unsigned long data) -{ - struct asd_ascb *ascb = (void *) data; - struct asd_seq_data *seq = &ascb->ha->seq; - unsigned long flags; +/* ---------- CLEAR NEXUS ---------- */ - spin_lock_irqsave(&seq->pend_q_lock, flags); - seq->pending--; - list_del_init(&ascb->list); - spin_unlock_irqrestore(&seq->pend_q_lock, flags); -} +struct tasklet_completion_status { + int dl_opcode; + int tmf_state; + u8 tag_valid:1; + __be16 tag; +}; + +#define DECLARE_TCS(tcs) \ + struct tasklet_completion_status tcs = { \ + .dl_opcode = 0, \ + .tmf_state = 0, \ + .tag_valid = 0, \ + .tag = 0, \ + } -/* ---------- CLEAR NEXUS ---------- */ static void asd_clear_nexus_tasklet_complete(struct asd_ascb *ascb, struct done_list_struct *dl) { + struct tasklet_completion_status *tcs = ascb->uldd_task; ASD_DPRINTK("%s: here\n", __FUNCTION__); if (!del_timer(&ascb->timer)) { ASD_DPRINTK("%s: couldn't delete timer\n", __FUNCTION__); return; } ASD_DPRINTK("%s: opcode: 0x%x\n", __FUNCTION__, dl->opcode); - ascb->uldd_task = (void *) (unsigned long) dl->opcode; - complete(&ascb->completion); + tcs->dl_opcode = dl->opcode; + complete(ascb->completion); + asd_ascb_free(ascb); } static void asd_clear_nexus_timedout(unsigned long data) { - struct asd_ascb *ascb = (void *) data; + struct asd_ascb *ascb = (void *)data; + struct tasklet_completion_status *tcs = ascb->uldd_task; ASD_DPRINTK("%s: here\n", __FUNCTION__); - asd_timedout_common(data); - ascb->uldd_task = (void *) TMF_RESP_FUNC_FAILED; - complete(&ascb->completion); + tcs->dl_opcode = TMF_RESP_FUNC_FAILED; + complete(ascb->completion); } #define CLEAR_NEXUS_PRE \ + struct asd_ascb *ascb; \ + struct scb *scb; \ + int res; \ + DECLARE_COMPLETION_ONSTACK(completion); \ + DECLARE_TCS(tcs); \ + \ ASD_DPRINTK("%s: PRE\n", __FUNCTION__); \ res = 1; \ ascb = asd_ascb_alloc_list(asd_ha, &res, GFP_KERNEL); \ if (!ascb) \ return -ENOMEM; \ \ + ascb->completion = &completion; \ + ascb->uldd_task = &tcs; \ scb = ascb->scb; \ scb->header.opcode = CLEAR_NEXUS @@ -107,10 +121,11 @@ static void asd_clear_nexus_timedout(unsigned long data) if (res) \ goto out_err; \ ASD_DPRINTK("%s: clear nexus posted, waiting...\n", __FUNCTION__); \ - wait_for_completion(&ascb->completion); \ - res = (int) (unsigned long) ascb->uldd_task; \ + wait_for_completion(&completion); \ + res = tcs.dl_opcode; \ if (res == TC_NO_ERROR) \ res = TMF_RESP_FUNC_COMPLETE; \ + return res; \ out_err: \ asd_ascb_free(ascb); \ return res @@ -118,9 +133,6 @@ out_err: \ int asd_clear_nexus_ha(struct sas_ha_struct *sas_ha) { struct asd_ha_struct *asd_ha = sas_ha->lldd_ha; - struct asd_ascb *ascb; - struct scb *scb; - int res; CLEAR_NEXUS_PRE; scb->clear_nexus.nexus = NEXUS_ADAPTER; @@ -130,9 +142,6 @@ int asd_clear_nexus_ha(struct sas_ha_struct *sas_ha) int asd_clear_nexus_port(struct asd_sas_port *port) { struct asd_ha_struct *asd_ha = port->ha->lldd_ha; - struct asd_ascb *ascb; - struct scb *scb; - int res; CLEAR_NEXUS_PRE; scb->clear_nexus.nexus = NEXUS_PORT; @@ -140,29 +149,73 @@ int asd_clear_nexus_port(struct asd_sas_port *port) CLEAR_NEXUS_POST; } -#if 0 -static int asd_clear_nexus_I_T(struct domain_device *dev) +enum clear_nexus_phase { + NEXUS_PHASE_PRE, + NEXUS_PHASE_POST, + NEXUS_PHASE_RESUME, +}; + +static int asd_clear_nexus_I_T(struct domain_device *dev, + enum clear_nexus_phase phase) { struct asd_ha_struct *asd_ha = dev->port->ha->lldd_ha; - struct asd_ascb *ascb; - struct scb *scb; - int res; CLEAR_NEXUS_PRE; scb->clear_nexus.nexus = NEXUS_I_T; - scb->clear_nexus.flags = SEND_Q | EXEC_Q | NOTINQ; + switch (phase) { + case NEXUS_PHASE_PRE: + scb->clear_nexus.flags = EXEC_Q | SUSPEND_TX; + break; + case NEXUS_PHASE_POST: + scb->clear_nexus.flags = SEND_Q | NOTINQ; + break; + case NEXUS_PHASE_RESUME: + scb->clear_nexus.flags = RESUME_TX; + } scb->clear_nexus.conn_handle = cpu_to_le16((u16)(unsigned long) dev->lldd_dev); CLEAR_NEXUS_POST; } -#endif + +int asd_I_T_nexus_reset(struct domain_device *dev) +{ + int res, tmp_res, i; + struct sas_phy *phy = sas_find_local_phy(dev); + /* Standard mandates link reset for ATA (type 0) and + * hard reset for SSP (type 1) */ + int reset_type = (dev->dev_type == SATA_DEV || + (dev->tproto & SAS_PROTOCOL_STP)) ? 0 : 1; + + asd_clear_nexus_I_T(dev, NEXUS_PHASE_PRE); + /* send a hard reset */ + ASD_DPRINTK("sending %s reset to %s\n", + reset_type ? "hard" : "soft", phy->dev.bus_id); + res = sas_phy_reset(phy, reset_type); + if (res == TMF_RESP_FUNC_COMPLETE) { + /* wait for the maximum settle time */ + msleep(500); + /* clear all outstanding commands (keep nexus suspended) */ + asd_clear_nexus_I_T(dev, NEXUS_PHASE_POST); + } + for (i = 0 ; i < 3; i++) { + tmp_res = asd_clear_nexus_I_T(dev, NEXUS_PHASE_RESUME); + if (tmp_res == TC_RESUME) + return res; + msleep(500); + } + + /* This is a bit of a problem: the sequencer is still suspended + * and is refusing to resume. Hope it will resume on a bigger hammer + * or the disk is lost */ + dev_printk(KERN_ERR, &phy->dev, + "Failed to resume nexus after reset 0x%x\n", tmp_res); + + return TMF_RESP_FUNC_FAILED; +} static int asd_clear_nexus_I_T_L(struct domain_device *dev, u8 *lun) { struct asd_ha_struct *asd_ha = dev->port->ha->lldd_ha; - struct asd_ascb *ascb; - struct scb *scb; - int res; CLEAR_NEXUS_PRE; scb->clear_nexus.nexus = NEXUS_I_T_L; @@ -177,9 +230,6 @@ static int asd_clear_nexus_tag(struct sas_task *task) { struct asd_ha_struct *asd_ha = task->dev->port->ha->lldd_ha; struct asd_ascb *tascb = task->lldd_task; - struct asd_ascb *ascb; - struct scb *scb; - int res; CLEAR_NEXUS_PRE; scb->clear_nexus.nexus = NEXUS_TAG; @@ -195,9 +245,6 @@ static int asd_clear_nexus_index(struct sas_task *task) { struct asd_ha_struct *asd_ha = task->dev->port->ha->lldd_ha; struct asd_ascb *tascb = task->lldd_task; - struct asd_ascb *ascb; - struct scb *scb; - int res; CLEAR_NEXUS_PRE; scb->clear_nexus.nexus = NEXUS_TRANS_CX; @@ -213,11 +260,11 @@ static int asd_clear_nexus_index(struct sas_task *task) static void asd_tmf_timedout(unsigned long data) { struct asd_ascb *ascb = (void *) data; + struct tasklet_completion_status *tcs = ascb->uldd_task; ASD_DPRINTK("tmf timed out\n"); - asd_timedout_common(data); - ascb->uldd_task = (void *) TMF_RESP_FUNC_FAILED; - complete(&ascb->completion); + tcs->tmf_state = TMF_RESP_FUNC_FAILED; + complete(ascb->completion); } static int asd_get_tmf_resp_tasklet(struct asd_ascb *ascb, @@ -269,18 +316,24 @@ static int asd_get_tmf_resp_tasklet(struct asd_ascb *ascb, static void asd_tmf_tasklet_complete(struct asd_ascb *ascb, struct done_list_struct *dl) { + struct tasklet_completion_status *tcs; + if (!del_timer(&ascb->timer)) return; + tcs = ascb->uldd_task; ASD_DPRINTK("tmf tasklet complete\n"); - if (dl->opcode == TC_SSP_RESP) - ascb->uldd_task = (void *) (unsigned long) - asd_get_tmf_resp_tasklet(ascb, dl); - else - ascb->uldd_task = (void *) 0xFF00 + (unsigned long) dl->opcode; + tcs->dl_opcode = dl->opcode; + + if (dl->opcode == TC_SSP_RESP) { + tcs->tmf_state = asd_get_tmf_resp_tasklet(ascb, dl); + tcs->tag_valid = ascb->tag_valid; + tcs->tag = ascb->tag; + } - complete(&ascb->completion); + complete(ascb->completion); + asd_ascb_free(ascb); } static inline int asd_clear_nexus(struct sas_task *task) @@ -288,15 +341,19 @@ static inline int asd_clear_nexus(struct sas_task *task) int res = TMF_RESP_FUNC_FAILED; int leftover; struct asd_ascb *tascb = task->lldd_task; + DECLARE_COMPLETION_ONSTACK(completion); unsigned long flags; + tascb->completion = &completion; + ASD_DPRINTK("task not done, clearing nexus\n"); if (tascb->tag_valid) res = asd_clear_nexus_tag(task); else res = asd_clear_nexus_index(task); - leftover = wait_for_completion_timeout(&tascb->completion, + leftover = wait_for_completion_timeout(&completion, AIC94XX_SCB_TIMEOUT); + tascb->completion = NULL; ASD_DPRINTK("came back from clear nexus\n"); spin_lock_irqsave(&task->task_state_lock, flags); if (leftover < 1) @@ -350,6 +407,11 @@ int asd_abort_task(struct sas_task *task) struct asd_ascb *ascb = NULL; struct scb *scb; int leftover; + DECLARE_TCS(tcs); + DECLARE_COMPLETION_ONSTACK(completion); + DECLARE_COMPLETION_ONSTACK(tascb_completion); + + tascb->completion = &tascb_completion; spin_lock_irqsave(&task->task_state_lock, flags); if (task->task_state_flags & SAS_TASK_STATE_DONE) { @@ -363,8 +425,10 @@ int asd_abort_task(struct sas_task *task) ascb = asd_ascb_alloc_list(asd_ha, &res, GFP_KERNEL); if (!ascb) return -ENOMEM; - scb = ascb->scb; + ascb->uldd_task = &tcs; + ascb->completion = &completion; + scb = ascb->scb; scb->header.opcode = SCB_ABORT_TASK; switch (task->task_proto) { @@ -406,13 +470,12 @@ int asd_abort_task(struct sas_task *task) res = asd_enqueue_internal(ascb, asd_tmf_tasklet_complete, asd_tmf_timedout); if (res) - goto out; - wait_for_completion(&ascb->completion); + goto out_free; + wait_for_completion(&completion); ASD_DPRINTK("tmf came back\n"); - res = (int) (unsigned long) ascb->uldd_task; - tascb->tag = ascb->tag; - tascb->tag_valid = ascb->tag_valid; + tascb->tag = tcs.tag; + tascb->tag_valid = tcs.tag_valid; spin_lock_irqsave(&task->task_state_lock, flags); if (task->task_state_flags & SAS_TASK_STATE_DONE) { @@ -423,63 +486,68 @@ int asd_abort_task(struct sas_task *task) } spin_unlock_irqrestore(&task->task_state_lock, flags); - switch (res) { - /* The task to be aborted has been sent to the device. - * We got a Response IU for the ABORT TASK TMF. */ - case TC_NO_ERROR + 0xFF00: - case TMF_RESP_FUNC_COMPLETE: - case TMF_RESP_FUNC_FAILED: - res = asd_clear_nexus(task); - break; - case TMF_RESP_INVALID_FRAME: - case TMF_RESP_OVERLAPPED_TAG: - case TMF_RESP_FUNC_ESUPP: - case TMF_RESP_NO_LUN: - goto out_done; break; - } - /* In the following we assume that the managing layer - * will _never_ make a mistake, when issuing ABORT TASK. - */ - switch (res) { - default: - res = asd_clear_nexus(task); - /* fallthrough */ - case TC_NO_ERROR + 0xFF00: - case TMF_RESP_FUNC_COMPLETE: - break; - /* The task hasn't been sent to the device xor we never got - * a (sane) Response IU for the ABORT TASK TMF. - */ - case TF_NAK_RECV + 0xFF00: - res = TMF_RESP_INVALID_FRAME; - break; - case TF_TMF_TASK_DONE + 0xFF00: /* done but not reported yet */ + if (tcs.dl_opcode == TC_SSP_RESP) { + /* The task to be aborted has been sent to the device. + * We got a Response IU for the ABORT TASK TMF. */ + if (tcs.tmf_state == TMF_RESP_FUNC_COMPLETE) + res = asd_clear_nexus(task); + else + res = tcs.tmf_state; + } else if (tcs.dl_opcode == TC_NO_ERROR && + tcs.tmf_state == TMF_RESP_FUNC_FAILED) { + /* timeout */ res = TMF_RESP_FUNC_FAILED; - leftover = wait_for_completion_timeout(&tascb->completion, - AIC94XX_SCB_TIMEOUT); - spin_lock_irqsave(&task->task_state_lock, flags); - if (leftover < 1) + } else { + /* In the following we assume that the managing layer + * will _never_ make a mistake, when issuing ABORT + * TASK. + */ + switch (tcs.dl_opcode) { + default: + res = asd_clear_nexus(task); + /* fallthrough */ + case TC_NO_ERROR: + break; + /* The task hasn't been sent to the device xor + * we never got a (sane) Response IU for the + * ABORT TASK TMF. + */ + case TF_NAK_RECV: + res = TMF_RESP_INVALID_FRAME; + break; + case TF_TMF_TASK_DONE: /* done but not reported yet */ res = TMF_RESP_FUNC_FAILED; - if (task->task_state_flags & SAS_TASK_STATE_DONE) + leftover = + wait_for_completion_timeout(&tascb_completion, + AIC94XX_SCB_TIMEOUT); + spin_lock_irqsave(&task->task_state_lock, flags); + if (leftover < 1) + res = TMF_RESP_FUNC_FAILED; + if (task->task_state_flags & SAS_TASK_STATE_DONE) + res = TMF_RESP_FUNC_COMPLETE; + spin_unlock_irqrestore(&task->task_state_lock, flags); + break; + case TF_TMF_NO_TAG: + case TF_TMF_TAG_FREE: /* the tag is in the free list */ + case TF_TMF_NO_CONN_HANDLE: /* no such device */ res = TMF_RESP_FUNC_COMPLETE; - spin_unlock_irqrestore(&task->task_state_lock, flags); - goto out_done; - case TF_TMF_NO_TAG + 0xFF00: - case TF_TMF_TAG_FREE + 0xFF00: /* the tag is in the free list */ - case TF_TMF_NO_CONN_HANDLE + 0xFF00: /* no such device */ - res = TMF_RESP_FUNC_COMPLETE; - goto out_done; - case TF_TMF_NO_CTX + 0xFF00: /* not in seq, or proto != SSP */ - res = TMF_RESP_FUNC_ESUPP; - goto out; + break; + case TF_TMF_NO_CTX: /* not in seq, or proto != SSP */ + res = TMF_RESP_FUNC_ESUPP; + break; + } } -out_done: + out_done: + tascb->completion = NULL; if (res == TMF_RESP_FUNC_COMPLETE) { task->lldd_task = NULL; mb(); asd_ascb_free(tascb); } -out: + ASD_DPRINTK("task 0x%p aborted, res: 0x%x\n", task, res); + return res; + + out_free: asd_ascb_free(ascb); ASD_DPRINTK("task 0x%p aborted, res: 0x%x\n", task, res); return res; @@ -507,6 +575,8 @@ static int asd_initiate_ssp_tmf(struct domain_device *dev, u8 *lun, struct asd_ascb *ascb; int res = 1; struct scb *scb; + DECLARE_COMPLETION_ONSTACK(completion); + DECLARE_TCS(tcs); if (!(dev->tproto & SAS_PROTOCOL_SSP)) return TMF_RESP_FUNC_ESUPP; @@ -514,6 +584,9 @@ static int asd_initiate_ssp_tmf(struct domain_device *dev, u8 *lun, ascb = asd_ascb_alloc_list(asd_ha, &res, GFP_KERNEL); if (!ascb) return -ENOMEM; + + ascb->completion = &completion; + ascb->uldd_task = &tcs; scb = ascb->scb; if (tmf == TMF_QUERY_TASK) @@ -546,31 +619,32 @@ static int asd_initiate_ssp_tmf(struct domain_device *dev, u8 *lun, asd_tmf_timedout); if (res) goto out_err; - wait_for_completion(&ascb->completion); - res = (int) (unsigned long) ascb->uldd_task; + wait_for_completion(&completion); - switch (res) { - case TC_NO_ERROR + 0xFF00: + switch (tcs.dl_opcode) { + case TC_NO_ERROR: res = TMF_RESP_FUNC_COMPLETE; break; - case TF_NAK_RECV + 0xFF00: + case TF_NAK_RECV: res = TMF_RESP_INVALID_FRAME; break; - case TF_TMF_TASK_DONE + 0xFF00: + case TF_TMF_TASK_DONE: res = TMF_RESP_FUNC_FAILED; break; - case TF_TMF_NO_TAG + 0xFF00: - case TF_TMF_TAG_FREE + 0xFF00: /* the tag is in the free list */ - case TF_TMF_NO_CONN_HANDLE + 0xFF00: /* no such device */ + case TF_TMF_NO_TAG: + case TF_TMF_TAG_FREE: /* the tag is in the free list */ + case TF_TMF_NO_CONN_HANDLE: /* no such device */ res = TMF_RESP_FUNC_COMPLETE; break; - case TF_TMF_NO_CTX + 0xFF00: /* not in seq, or proto != SSP */ + case TF_TMF_NO_CTX: /* not in seq, or proto != SSP */ res = TMF_RESP_FUNC_ESUPP; break; default: /* Allow TMF response codes to propagate upwards */ + res = tcs.dl_opcode; break; } + return res; out_err: asd_ascb_free(ascb); return res; diff --git a/drivers/scsi/arcmsr/arcmsr.h b/drivers/scsi/arcmsr/arcmsr.h index 57786502e3ec..0393707bdfce 100644 --- a/drivers/scsi/arcmsr/arcmsr.h +++ b/drivers/scsi/arcmsr/arcmsr.h @@ -48,7 +48,7 @@ struct class_device_attribute; /*The limit of outstanding scsi command that firmware can handle*/ #define ARCMSR_MAX_OUTSTANDING_CMD 256 #define ARCMSR_MAX_FREECCB_NUM 320 -#define ARCMSR_DRIVER_VERSION "Driver Version 1.20.00.15 2007/12/24" +#define ARCMSR_DRIVER_VERSION "Driver Version 1.20.00.15 2008/02/27" #define ARCMSR_SCSI_INITIATOR_ID 255 #define ARCMSR_MAX_XFER_SECTORS 512 #define ARCMSR_MAX_XFER_SECTORS_B 4096 diff --git a/drivers/scsi/gdth.c b/drivers/scsi/gdth.c index 6d67f5c0eb8e..27ebd336409b 100644 --- a/drivers/scsi/gdth.c +++ b/drivers/scsi/gdth.c @@ -160,7 +160,7 @@ static void gdth_readapp_event(gdth_ha_str *ha, unchar application, static void gdth_clear_events(void); static void gdth_copy_internal_data(gdth_ha_str *ha, Scsi_Cmnd *scp, - char *buffer, ushort count, int to_buffer); + char *buffer, ushort count); static int gdth_internal_cache_cmd(gdth_ha_str *ha, Scsi_Cmnd *scp); static int gdth_fill_cache_cmd(gdth_ha_str *ha, Scsi_Cmnd *scp, ushort hdrive); @@ -182,7 +182,6 @@ static int gdth_ioctl(struct inode *inode, struct file *filep, unsigned int cmd, unsigned long arg); static void gdth_flush(gdth_ha_str *ha); -static int gdth_halt(struct notifier_block *nb, ulong event, void *buf); static int gdth_queuecommand(Scsi_Cmnd *scp,void (*done)(Scsi_Cmnd *)); static int __gdth_queuecommand(gdth_ha_str *ha, struct scsi_cmnd *scp, struct gdth_cmndinfo *cmndinfo); @@ -417,12 +416,6 @@ static inline void gdth_set_sglist(struct scsi_cmnd *cmd, #include "gdth_proc.h" #include "gdth_proc.c" -/* notifier block to get a notify on system shutdown/halt/reboot */ -static struct notifier_block gdth_notifier = { - gdth_halt, NULL, 0 -}; -static int notifier_disabled = 0; - static gdth_ha_str *gdth_find_ha(int hanum) { gdth_ha_str *ha; @@ -445,8 +438,8 @@ static struct gdth_cmndinfo *gdth_get_cmndinfo(gdth_ha_str *ha) for (i=0; i<GDTH_MAXCMDS; ++i) { if (ha->cmndinfo[i].index == 0) { priv = &ha->cmndinfo[i]; - priv->index = i+1; memset(priv, 0, sizeof(*priv)); + priv->index = i+1; break; } } @@ -493,7 +486,6 @@ int __gdth_execute(struct scsi_device *sdev, gdth_cmd_str *gdtcmd, char *cmnd, gdth_ha_str *ha = shost_priv(sdev->host); Scsi_Cmnd *scp; struct gdth_cmndinfo cmndinfo; - struct scatterlist one_sg; DECLARE_COMPLETION_ONSTACK(wait); int rval; @@ -507,13 +499,10 @@ int __gdth_execute(struct scsi_device *sdev, gdth_cmd_str *gdtcmd, char *cmnd, /* use request field to save the ptr. to completion struct. */ scp->request = (struct request *)&wait; scp->timeout_per_command = timeout*HZ; - sg_init_one(&one_sg, gdtcmd, sizeof(*gdtcmd)); - gdth_set_sglist(scp, &one_sg); - gdth_set_sg_count(scp, 1); - gdth_set_bufflen(scp, sizeof(*gdtcmd)); scp->cmd_len = 12; memcpy(scp->cmnd, cmnd, 12); cmndinfo.priority = IOCTL_PRI; + cmndinfo.internal_cmd_str = gdtcmd; cmndinfo.internal_command = 1; TRACE(("__gdth_execute() cmd 0x%x\n", scp->cmnd[0])); @@ -2355,7 +2344,7 @@ static void gdth_next(gdth_ha_str *ha) * buffers, kmap_atomic() as needed. */ static void gdth_copy_internal_data(gdth_ha_str *ha, Scsi_Cmnd *scp, - char *buffer, ushort count, int to_buffer) + char *buffer, ushort count) { ushort cpcount,i, max_sg = gdth_sg_count(scp); ushort cpsum,cpnow; @@ -2381,10 +2370,7 @@ static void gdth_copy_internal_data(gdth_ha_str *ha, Scsi_Cmnd *scp, } local_irq_save(flags); address = kmap_atomic(sg_page(sl), KM_BIO_SRC_IRQ) + sl->offset; - if (to_buffer) - memcpy(buffer, address, cpnow); - else - memcpy(address, buffer, cpnow); + memcpy(address, buffer, cpnow); flush_dcache_page(sg_page(sl)); kunmap_atomic(address, KM_BIO_SRC_IRQ); local_irq_restore(flags); @@ -2438,7 +2424,7 @@ static int gdth_internal_cache_cmd(gdth_ha_str *ha, Scsi_Cmnd *scp) strcpy(inq.vendor,ha->oem_name); sprintf(inq.product,"Host Drive #%02d",t); strcpy(inq.revision," "); - gdth_copy_internal_data(ha, scp, (char*)&inq, sizeof(gdth_inq_data), 0); + gdth_copy_internal_data(ha, scp, (char*)&inq, sizeof(gdth_inq_data)); break; case REQUEST_SENSE: @@ -2448,7 +2434,7 @@ static int gdth_internal_cache_cmd(gdth_ha_str *ha, Scsi_Cmnd *scp) sd.key = NO_SENSE; sd.info = 0; sd.add_length= 0; - gdth_copy_internal_data(ha, scp, (char*)&sd, sizeof(gdth_sense_data), 0); + gdth_copy_internal_data(ha, scp, (char*)&sd, sizeof(gdth_sense_data)); break; case MODE_SENSE: @@ -2460,7 +2446,7 @@ static int gdth_internal_cache_cmd(gdth_ha_str *ha, Scsi_Cmnd *scp) mpd.bd.block_length[0] = (SECTOR_SIZE & 0x00ff0000) >> 16; mpd.bd.block_length[1] = (SECTOR_SIZE & 0x0000ff00) >> 8; mpd.bd.block_length[2] = (SECTOR_SIZE & 0x000000ff); - gdth_copy_internal_data(ha, scp, (char*)&mpd, sizeof(gdth_modep_data), 0); + gdth_copy_internal_data(ha, scp, (char*)&mpd, sizeof(gdth_modep_data)); break; case READ_CAPACITY: @@ -2470,7 +2456,7 @@ static int gdth_internal_cache_cmd(gdth_ha_str *ha, Scsi_Cmnd *scp) else rdc.last_block_no = cpu_to_be32(ha->hdr[t].size-1); rdc.block_length = cpu_to_be32(SECTOR_SIZE); - gdth_copy_internal_data(ha, scp, (char*)&rdc, sizeof(gdth_rdcap_data), 0); + gdth_copy_internal_data(ha, scp, (char*)&rdc, sizeof(gdth_rdcap_data)); break; case SERVICE_ACTION_IN: @@ -2482,7 +2468,7 @@ static int gdth_internal_cache_cmd(gdth_ha_str *ha, Scsi_Cmnd *scp) rdc16.last_block_no = cpu_to_be64(ha->hdr[t].size-1); rdc16.block_length = cpu_to_be32(SECTOR_SIZE); gdth_copy_internal_data(ha, scp, (char*)&rdc16, - sizeof(gdth_rdcap16_data), 0); + sizeof(gdth_rdcap16_data)); } else { scp->result = DID_ABORT << 16; } @@ -2852,6 +2838,7 @@ static int gdth_fill_raw_cmd(gdth_ha_str *ha, Scsi_Cmnd *scp, unchar b) static int gdth_special_cmd(gdth_ha_str *ha, Scsi_Cmnd *scp) { register gdth_cmd_str *cmdp; + struct gdth_cmndinfo *cmndinfo = gdth_cmnd_priv(scp); int cmd_index; cmdp= ha->pccb; @@ -2860,7 +2847,7 @@ static int gdth_special_cmd(gdth_ha_str *ha, Scsi_Cmnd *scp) if (ha->type==GDT_EISA && ha->cmd_cnt>0) return 0; - gdth_copy_internal_data(ha, scp, (char *)cmdp, sizeof(gdth_cmd_str), 1); + *cmdp = *cmndinfo->internal_cmd_str; cmdp->RequestBuffer = scp; /* search free command index */ @@ -3794,6 +3781,8 @@ static void gdth_timeout(ulong data) gdth_ha_str *ha; ulong flags; + BUG_ON(list_empty(&gdth_instances)); + ha = list_first_entry(&gdth_instances, gdth_ha_str, list); spin_lock_irqsave(&ha->smp_lock, flags); @@ -4669,45 +4658,6 @@ static void gdth_flush(gdth_ha_str *ha) } } -/* shutdown routine */ -static int gdth_halt(struct notifier_block *nb, ulong event, void *buf) -{ - gdth_ha_str *ha; -#ifndef __alpha__ - gdth_cmd_str gdtcmd; - char cmnd[MAX_COMMAND_SIZE]; -#endif - - if (notifier_disabled) - return NOTIFY_OK; - - TRACE2(("gdth_halt() event %d\n",(int)event)); - if (event != SYS_RESTART && event != SYS_HALT && event != SYS_POWER_OFF) - return NOTIFY_DONE; - - notifier_disabled = 1; - printk("GDT-HA: Flushing all host drives .. "); - list_for_each_entry(ha, &gdth_instances, list) { - gdth_flush(ha); - -#ifndef __alpha__ - /* controller reset */ - memset(cmnd, 0xff, MAX_COMMAND_SIZE); - gdtcmd.BoardNode = LOCALBOARD; - gdtcmd.Service = CACHESERVICE; - gdtcmd.OpCode = GDT_RESET; - TRACE2(("gdth_halt(): reset controller %d\n", ha->hanum)); - gdth_execute(ha->shost, &gdtcmd, cmnd, 10, NULL); -#endif - } - printk("Done.\n"); - -#ifdef GDTH_STATISTICS - del_timer(&gdth_timer); -#endif - return NOTIFY_OK; -} - /* configure lun */ static int gdth_slave_configure(struct scsi_device *sdev) { @@ -5142,13 +5092,13 @@ static void gdth_remove_one(gdth_ha_str *ha) scsi_remove_host(shp); + gdth_flush(ha); + if (ha->sdev) { scsi_free_host_dev(ha->sdev); ha->sdev = NULL; } - gdth_flush(ha); - if (shp->irq) free_irq(shp->irq,ha); @@ -5174,6 +5124,24 @@ static void gdth_remove_one(gdth_ha_str *ha) scsi_host_put(shp); } +static int gdth_halt(struct notifier_block *nb, ulong event, void *buf) +{ + gdth_ha_str *ha; + + TRACE2(("gdth_halt() event %d\n", (int)event)); + if (event != SYS_RESTART && event != SYS_HALT && event != SYS_POWER_OFF) + return NOTIFY_DONE; + + list_for_each_entry(ha, &gdth_instances, list) + gdth_flush(ha); + + return NOTIFY_OK; +} + +static struct notifier_block gdth_notifier = { + gdth_halt, NULL, 0 +}; + static int __init gdth_init(void) { if (disable) { @@ -5236,7 +5204,6 @@ static int __init gdth_init(void) add_timer(&gdth_timer); #endif major = register_chrdev(0,"gdth", &gdth_fops); - notifier_disabled = 0; register_reboot_notifier(&gdth_notifier); gdth_polling = FALSE; return 0; @@ -5246,14 +5213,15 @@ static void __exit gdth_exit(void) { gdth_ha_str *ha; - list_for_each_entry(ha, &gdth_instances, list) - gdth_remove_one(ha); + unregister_chrdev(major, "gdth"); + unregister_reboot_notifier(&gdth_notifier); #ifdef GDTH_STATISTICS - del_timer(&gdth_timer); + del_timer_sync(&gdth_timer); #endif - unregister_chrdev(major,"gdth"); - unregister_reboot_notifier(&gdth_notifier); + + list_for_each_entry(ha, &gdth_instances, list) + gdth_remove_one(ha); } module_init(gdth_init); diff --git a/drivers/scsi/gdth.h b/drivers/scsi/gdth.h index 1434c6b0297c..26e4e92515e0 100644 --- a/drivers/scsi/gdth.h +++ b/drivers/scsi/gdth.h @@ -915,6 +915,7 @@ typedef struct { struct gdth_cmndinfo { /* per-command private info */ int index; int internal_command; /* don't call scsi_done */ + gdth_cmd_str *internal_cmd_str; /* crier for internal messages*/ dma_addr_t sense_paddr; /* sense dma-addr */ unchar priority; int timeout; diff --git a/drivers/scsi/ibmvscsi/ibmvstgt.c b/drivers/scsi/ibmvscsi/ibmvstgt.c index bd62131b97a1..e5881e92d0fb 100644 --- a/drivers/scsi/ibmvscsi/ibmvstgt.c +++ b/drivers/scsi/ibmvscsi/ibmvstgt.c @@ -290,7 +290,7 @@ static int ibmvstgt_cmd_done(struct scsi_cmnd *sc, int err = 0; dprintk("%p %p %x %u\n", iue, target, vio_iu(iue)->srp.cmd.cdb[0], - cmd->usg_sg); + scsi_sg_count(sc)); if (scsi_sg_count(sc)) err = srp_transfer_data(sc, &vio_iu(iue)->srp.cmd, ibmvstgt_rdma, 1, 1); @@ -838,9 +838,6 @@ static int ibmvstgt_probe(struct vio_dev *dev, const struct vio_device_id *id) if (!shost) goto free_vport; shost->transportt = ibmvstgt_transport_template; - err = scsi_tgt_alloc_queue(shost); - if (err) - goto put_host; target = host_to_srp_target(shost); target->shost = shost; @@ -872,6 +869,10 @@ static int ibmvstgt_probe(struct vio_dev *dev, const struct vio_device_id *id) if (err) goto destroy_queue; + err = scsi_tgt_alloc_queue(shost); + if (err) + goto destroy_queue; + return 0; destroy_queue: crq_queue_destroy(target); diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c index 59f8445eab0d..bdd7de7da39a 100644 --- a/drivers/scsi/libiscsi.c +++ b/drivers/scsi/libiscsi.c @@ -1708,8 +1708,8 @@ iscsi_session_setup(struct iscsi_transport *iscsit, qdepth = ISCSI_DEF_CMD_PER_LUN; } - if (!is_power_of_2(cmds_max) || - cmds_max >= ISCSI_MGMT_ITT_OFFSET) { + if (!is_power_of_2(cmds_max) || cmds_max >= ISCSI_MGMT_ITT_OFFSET || + cmds_max < 2) { if (cmds_max != 0) printk(KERN_ERR "iscsi: invalid can_queue of %d. " "can_queue must be a power of 2 and between " diff --git a/drivers/scsi/libsas/sas_ata.c b/drivers/scsi/libsas/sas_ata.c index 7cd05b599a12..b0e5ac372a32 100644 --- a/drivers/scsi/libsas/sas_ata.c +++ b/drivers/scsi/libsas/sas_ata.c @@ -236,12 +236,12 @@ static void sas_ata_phy_reset(struct ata_port *ap) struct domain_device *dev = ap->private_data; struct sas_internal *i = to_sas_internal(dev->port->ha->core.shost->transportt); - int res = 0; + int res = TMF_RESP_FUNC_FAILED; if (i->dft->lldd_I_T_nexus_reset) res = i->dft->lldd_I_T_nexus_reset(dev); - if (res) + if (res != TMF_RESP_FUNC_COMPLETE) SAS_DPRINTK("%s: Unable to reset I T nexus?\n", __FUNCTION__); switch (dev->sata_dev.command_set) { @@ -656,21 +656,6 @@ out: return res; } -static void sas_sata_propagate_sas_addr(struct domain_device *dev) -{ - unsigned long flags; - struct asd_sas_port *port = dev->port; - struct asd_sas_phy *phy; - - BUG_ON(dev->parent); - - memcpy(port->attached_sas_addr, dev->sas_addr, SAS_ADDR_SIZE); - spin_lock_irqsave(&port->phy_list_lock, flags); - list_for_each_entry(phy, &port->phy_list, port_phy_el) - memcpy(phy->attached_sas_addr, dev->sas_addr, SAS_ADDR_SIZE); - spin_unlock_irqrestore(&port->phy_list_lock, flags); -} - #define ATA_IDENTIFY_DEV 0xEC #define ATA_IDENTIFY_PACKET_DEV 0xA1 #define ATA_SET_FEATURES 0xEF @@ -728,26 +713,6 @@ static int sas_discover_sata_dev(struct domain_device *dev) goto out_err; } cont1: - /* Get WWN */ - if (dev->port->oob_mode != SATA_OOB_MODE) { - memcpy(dev->sas_addr, dev->sata_dev.rps_resp.rps.stp_sas_addr, - SAS_ADDR_SIZE); - } else if (dev->sata_dev.command_set == ATA_COMMAND_SET && - (le16_to_cpu(dev->sata_dev.identify_device[108]) & 0xF000) - == 0x5000) { - int i; - - for (i = 0; i < 4; i++) { - dev->sas_addr[2*i] = - (le16_to_cpu(dev->sata_dev.identify_device[108+i]) & 0xFF00) >> 8; - dev->sas_addr[2*i+1] = - le16_to_cpu(dev->sata_dev.identify_device[108+i]) & 0x00FF; - } - } - sas_hash_addr(dev->hashed_sas_addr, dev->sas_addr); - if (!dev->parent) - sas_sata_propagate_sas_addr(dev); - /* XXX Hint: register this SATA device with SATL. When this returns, dev->sata_dev->lu is alive and present. diff --git a/drivers/scsi/libsas/sas_port.c b/drivers/scsi/libsas/sas_port.c index e1e2d085c920..39ae68a3b0ef 100644 --- a/drivers/scsi/libsas/sas_port.c +++ b/drivers/scsi/libsas/sas_port.c @@ -92,9 +92,6 @@ static void sas_form_port(struct asd_sas_phy *phy) if (!port->phy) port->phy = phy->phy; - SAS_DPRINTK("phy%d added to port%d, phy_mask:0x%x\n", phy->id, - port->id, port->phy_mask); - if (*(u64 *)port->attached_sas_addr == 0) { port->class = phy->class; memcpy(port->attached_sas_addr, phy->attached_sas_addr, @@ -115,6 +112,11 @@ static void sas_form_port(struct asd_sas_phy *phy) } sas_port_add_phy(port->port, phy->phy); + SAS_DPRINTK("%s added to %s, phy_mask:0x%x (%16llx)\n", + phy->phy->dev.bus_id,port->port->dev.bus_id, + port->phy_mask, + SAS_ADDR(port->attached_sas_addr)); + if (port->port_dev) port->port_dev->pathways = port->num_phys; @@ -255,12 +257,11 @@ void sas_porte_hard_reset(struct work_struct *work) static void sas_init_port(struct asd_sas_port *port, struct sas_ha_struct *sas_ha, int i) { + memset(port, 0, sizeof(*port)); port->id = i; INIT_LIST_HEAD(&port->dev_list); spin_lock_init(&port->phy_list_lock); INIT_LIST_HEAD(&port->phy_list); - port->num_phys = 0; - port->phy_mask = 0; port->ha = sas_ha; spin_lock_init(&port->dev_list_lock); diff --git a/drivers/scsi/libsas/sas_scsi_host.c b/drivers/scsi/libsas/sas_scsi_host.c index 704ea06a6e50..1f8241563c6c 100644 --- a/drivers/scsi/libsas/sas_scsi_host.c +++ b/drivers/scsi/libsas/sas_scsi_host.c @@ -434,7 +434,7 @@ static int sas_recover_I_T(struct domain_device *dev) } /* Find the sas_phy that's attached to this device */ -static struct sas_phy *find_local_sas_phy(struct domain_device *dev) +struct sas_phy *sas_find_local_phy(struct domain_device *dev) { struct domain_device *pdev = dev->parent; struct ex_phy *exphy = NULL; @@ -456,6 +456,7 @@ static struct sas_phy *find_local_sas_phy(struct domain_device *dev) BUG_ON(!exphy); return exphy->phy; } +EXPORT_SYMBOL_GPL(sas_find_local_phy); /* Attempt to send a LUN reset message to a device */ int sas_eh_device_reset_handler(struct scsi_cmnd *cmd) @@ -482,7 +483,7 @@ int sas_eh_device_reset_handler(struct scsi_cmnd *cmd) int sas_eh_bus_reset_handler(struct scsi_cmnd *cmd) { struct domain_device *dev = cmd_to_domain_dev(cmd); - struct sas_phy *phy = find_local_sas_phy(dev); + struct sas_phy *phy = sas_find_local_phy(dev); int res; res = sas_phy_reset(phy, 1); @@ -497,10 +498,10 @@ int sas_eh_bus_reset_handler(struct scsi_cmnd *cmd) } /* Try to reset a device */ -static int try_to_reset_cmd_device(struct Scsi_Host *shost, - struct scsi_cmnd *cmd) +static int try_to_reset_cmd_device(struct scsi_cmnd *cmd) { int res; + struct Scsi_Host *shost = cmd->device->host; if (!shost->hostt->eh_device_reset_handler) goto try_bus_reset; @@ -540,6 +541,12 @@ Again: need_reset = task->task_state_flags & SAS_TASK_NEED_DEV_RESET; spin_unlock_irqrestore(&task->task_state_lock, flags); + if (need_reset) { + SAS_DPRINTK("%s: task 0x%p requests reset\n", + __FUNCTION__, task); + goto reset; + } + SAS_DPRINTK("trying to find task 0x%p\n", task); res = sas_scsi_find_task(task); @@ -550,18 +557,15 @@ Again: SAS_DPRINTK("%s: task 0x%p is done\n", __FUNCTION__, task); sas_eh_finish_cmd(cmd); - if (need_reset) - try_to_reset_cmd_device(shost, cmd); continue; case TASK_IS_ABORTED: SAS_DPRINTK("%s: task 0x%p is aborted\n", __FUNCTION__, task); sas_eh_finish_cmd(cmd); - if (need_reset) - try_to_reset_cmd_device(shost, cmd); continue; case TASK_IS_AT_LU: SAS_DPRINTK("task 0x%p is at LU: lu recover\n", task); + reset: tmf_resp = sas_recover_lu(task->dev, cmd); if (tmf_resp == TMF_RESP_FUNC_COMPLETE) { SAS_DPRINTK("dev %016llx LU %x is " @@ -569,8 +573,6 @@ Again: SAS_ADDR(task->dev), cmd->device->lun); sas_eh_finish_cmd(cmd); - if (need_reset) - try_to_reset_cmd_device(shost, cmd); sas_scsi_clear_queue_lu(work_q, cmd); goto Again; } @@ -581,15 +583,15 @@ Again: task); tmf_resp = sas_recover_I_T(task->dev); if (tmf_resp == TMF_RESP_FUNC_COMPLETE) { + struct domain_device *dev = task->dev; SAS_DPRINTK("I_T %016llx recovered\n", SAS_ADDR(task->dev->sas_addr)); sas_eh_finish_cmd(cmd); - if (need_reset) - try_to_reset_cmd_device(shost, cmd); - sas_scsi_clear_queue_I_T(work_q, task->dev); + sas_scsi_clear_queue_I_T(work_q, dev); goto Again; } /* Hammer time :-) */ + try_to_reset_cmd_device(cmd); if (i->dft->lldd_clear_nexus_port) { struct asd_sas_port *port = task->dev->port; SAS_DPRINTK("clearing nexus for port:%d\n", @@ -599,8 +601,6 @@ Again: SAS_DPRINTK("clear nexus port:%d " "succeeded\n", port->id); sas_eh_finish_cmd(cmd); - if (need_reset) - try_to_reset_cmd_device(shost, cmd); sas_scsi_clear_queue_port(work_q, port); goto Again; @@ -613,8 +613,6 @@ Again: SAS_DPRINTK("clear nexus ha " "succeeded\n"); sas_eh_finish_cmd(cmd); - if (need_reset) - try_to_reset_cmd_device(shost, cmd); goto clear_q; } } @@ -628,8 +626,6 @@ Again: cmd->device->lun); sas_eh_finish_cmd(cmd); - if (need_reset) - try_to_reset_cmd_device(shost, cmd); goto clear_q; } } diff --git a/drivers/scsi/mvsas.c b/drivers/scsi/mvsas.c index d4a6ac3c9c47..5ec0665b3a3d 100644 --- a/drivers/scsi/mvsas.c +++ b/drivers/scsi/mvsas.c @@ -40,7 +40,7 @@ #include <asm/io.h> #define DRV_NAME "mvsas" -#define DRV_VERSION "0.5" +#define DRV_VERSION "0.5.1" #define _MV_DUMP 0 #define MVS_DISABLE_NVRAM #define MVS_DISABLE_MSI @@ -1005,7 +1005,7 @@ err_out: return rc; #else /* FIXME , For SAS target mode */ - memcpy(buf, "\x00\x00\xab\x11\x30\x04\x05\x50", 8); + memcpy(buf, "\x50\x05\x04\x30\x11\xab\x00\x00", 8); return 0; #endif } @@ -1330,7 +1330,7 @@ static int mvs_int_rx(struct mvs_info *mvi, bool self_clear) mvs_hba_cq_dump(mvi); - if (unlikely(rx_desc & RXQ_DONE)) + if (likely(rx_desc & RXQ_DONE)) mvs_slot_complete(mvi, rx_desc); if (rx_desc & RXQ_ATTN) { attn = true; @@ -2720,9 +2720,8 @@ static int __devinit mvs_hw_init(struct mvs_info *mvi) msleep(100); /* init and reset phys */ for (i = 0; i < mvi->chip->n_phy; i++) { - /* FIXME: is this the correct dword order? */ - u32 lo = *((u32 *)&mvi->sas_addr[0]); - u32 hi = *((u32 *)&mvi->sas_addr[4]); + u32 lo = be32_to_cpu(*(u32 *)&mvi->sas_addr[4]); + u32 hi = be32_to_cpu(*(u32 *)&mvi->sas_addr[0]); mvs_detect_porttype(mvi, i); diff --git a/drivers/scsi/ps3rom.c b/drivers/scsi/ps3rom.c index 0cd614a0fa73..fad6cb5cba28 100644 --- a/drivers/scsi/ps3rom.c +++ b/drivers/scsi/ps3rom.c @@ -124,7 +124,7 @@ static int fill_from_dev_buffer(struct scsi_cmnd *cmd, const void *buf) } req_len += sgpnt->length; } - scsi_set_resid(cmd, req_len - act_len); + scsi_set_resid(cmd, buflen - act_len); return 0; } @@ -427,7 +427,7 @@ static struct scsi_host_template ps3rom_host_template = { .cmd_per_lun = 1, .emulated = 1, /* only sg driver uses this */ .max_sectors = PS3ROM_MAX_SECTORS, - .use_clustering = ENABLE_CLUSTERING, + .use_clustering = DISABLE_CLUSTERING, .module = THIS_MODULE, }; diff --git a/drivers/scsi/qla2xxx/qla_gs.c b/drivers/scsi/qla2xxx/qla_gs.c index 6226d88479f5..c1808763d40e 100644 --- a/drivers/scsi/qla2xxx/qla_gs.c +++ b/drivers/scsi/qla2xxx/qla_gs.c @@ -39,7 +39,7 @@ qla2x00_prep_ms_iocb(scsi_qla_host_t *ha, uint32_t req_size, uint32_t rsp_size) ms_pkt->entry_count = 1; SET_TARGET_ID(ha, ms_pkt->loop_id, SIMPLE_NAME_SERVER); ms_pkt->control_flags = __constant_cpu_to_le16(CF_READ | CF_HEAD_TAG); - ms_pkt->timeout = __constant_cpu_to_le16(25); + ms_pkt->timeout = cpu_to_le16(ha->r_a_tov / 10 * 2); ms_pkt->cmd_dsd_count = __constant_cpu_to_le16(1); ms_pkt->total_dsd_count = __constant_cpu_to_le16(2); ms_pkt->rsp_bytecount = cpu_to_le32(rsp_size); @@ -75,7 +75,7 @@ qla24xx_prep_ms_iocb(scsi_qla_host_t *ha, uint32_t req_size, uint32_t rsp_size) ct_pkt->entry_type = CT_IOCB_TYPE; ct_pkt->entry_count = 1; ct_pkt->nport_handle = __constant_cpu_to_le16(NPH_SNS); - ct_pkt->timeout = __constant_cpu_to_le16(25); + ct_pkt->timeout = cpu_to_le16(ha->r_a_tov / 10 * 2); ct_pkt->cmd_dsd_count = __constant_cpu_to_le16(1); ct_pkt->rsp_dsd_count = __constant_cpu_to_le16(1); ct_pkt->rsp_byte_count = cpu_to_le32(rsp_size); @@ -1144,7 +1144,7 @@ qla2x00_prep_ms_fdmi_iocb(scsi_qla_host_t *ha, uint32_t req_size, ms_pkt->entry_count = 1; SET_TARGET_ID(ha, ms_pkt->loop_id, ha->mgmt_svr_loop_id); ms_pkt->control_flags = __constant_cpu_to_le16(CF_READ | CF_HEAD_TAG); - ms_pkt->timeout = __constant_cpu_to_le16(59); + ms_pkt->timeout = cpu_to_le16(ha->r_a_tov / 10 * 2); ms_pkt->cmd_dsd_count = __constant_cpu_to_le16(1); ms_pkt->total_dsd_count = __constant_cpu_to_le16(2); ms_pkt->rsp_bytecount = cpu_to_le32(rsp_size); @@ -1181,7 +1181,7 @@ qla24xx_prep_ms_fdmi_iocb(scsi_qla_host_t *ha, uint32_t req_size, ct_pkt->entry_type = CT_IOCB_TYPE; ct_pkt->entry_count = 1; ct_pkt->nport_handle = cpu_to_le16(ha->mgmt_svr_loop_id); - ct_pkt->timeout = __constant_cpu_to_le16(59); + ct_pkt->timeout = cpu_to_le16(ha->r_a_tov / 10 * 2); ct_pkt->cmd_dsd_count = __constant_cpu_to_le16(1); ct_pkt->rsp_dsd_count = __constant_cpu_to_le16(1); ct_pkt->rsp_byte_count = cpu_to_le32(rsp_size); @@ -1761,7 +1761,7 @@ qla24xx_prep_ms_fm_iocb(scsi_qla_host_t *ha, uint32_t req_size, ct_pkt->entry_type = CT_IOCB_TYPE; ct_pkt->entry_count = 1; ct_pkt->nport_handle = cpu_to_le16(ha->mgmt_svr_loop_id); - ct_pkt->timeout = __constant_cpu_to_le16(59); + ct_pkt->timeout = cpu_to_le16(ha->r_a_tov / 10 * 2); ct_pkt->cmd_dsd_count = __constant_cpu_to_le16(1); ct_pkt->rsp_dsd_count = __constant_cpu_to_le16(1); ct_pkt->rsp_byte_count = cpu_to_le32(rsp_size); diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index d5c7853e7eba..364be7d06875 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -1733,8 +1733,8 @@ qla2x00_nvram_config(scsi_qla_host_t *ha) ha->login_timeout = nv->login_timeout; icb->login_timeout = nv->login_timeout; - /* Set minimum RATOV to 200 tenths of a second. */ - ha->r_a_tov = 200; + /* Set minimum RATOV to 100 tenths of a second. */ + ha->r_a_tov = 100; ha->loop_reset_delay = nv->reset_delay; @@ -3645,8 +3645,8 @@ qla24xx_nvram_config(scsi_qla_host_t *ha) ha->login_timeout = le16_to_cpu(nv->login_timeout); icb->login_timeout = cpu_to_le16(nv->login_timeout); - /* Set minimum RATOV to 200 tenths of a second. */ - ha->r_a_tov = 200; + /* Set minimum RATOV to 100 tenths of a second. */ + ha->r_a_tov = 100; ha->loop_reset_delay = nv->reset_delay; @@ -4022,7 +4022,8 @@ qla2x00_try_to_stop_firmware(scsi_qla_host_t *ha) return; ret = qla2x00_stop_firmware(ha); - for (retries = 5; ret != QLA_SUCCESS && retries ; retries--) { + for (retries = 5; ret != QLA_SUCCESS && ret != QLA_FUNCTION_TIMEOUT && + retries ; retries--) { qla2x00_reset_chip(ha); if (qla2x00_chip_diag(ha) != QLA_SUCCESS) continue; diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c index 14e6f22944b7..f0337036c7bb 100644 --- a/drivers/scsi/qla2xxx/qla_isr.c +++ b/drivers/scsi/qla2xxx/qla_isr.c @@ -958,6 +958,11 @@ qla2x00_status_entry(scsi_qla_host_t *ha, void *pkt) } } + /* Check for overrun. */ + if (IS_FWI2_CAPABLE(ha) && comp_status == CS_COMPLETE && + scsi_status & SS_RESIDUAL_OVER) + comp_status = CS_DATA_OVERRUN; + /* * Based on Host and scsi status generate status code for Linux */ diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c index 99d29fff836d..bb103580e1ba 100644 --- a/drivers/scsi/qla2xxx/qla_mbx.c +++ b/drivers/scsi/qla2xxx/qla_mbx.c @@ -2206,7 +2206,7 @@ qla24xx_abort_target(fc_port_t *fcport) tsk->p.tsk.entry_type = TSK_MGMT_IOCB_TYPE; tsk->p.tsk.entry_count = 1; tsk->p.tsk.nport_handle = cpu_to_le16(fcport->loop_id); - tsk->p.tsk.timeout = __constant_cpu_to_le16(25); + tsk->p.tsk.timeout = cpu_to_le16(ha->r_a_tov / 10 * 2); tsk->p.tsk.control_flags = __constant_cpu_to_le32(TCF_TARGET_RESET); tsk->p.tsk.port_id[0] = fcport->d_id.b.al_pa; tsk->p.tsk.port_id[1] = fcport->d_id.b.area; diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h index c5742cc15abb..ea08a129fee9 100644 --- a/drivers/scsi/qla2xxx/qla_version.h +++ b/drivers/scsi/qla2xxx/qla_version.h @@ -7,7 +7,7 @@ /* * Driver version */ -#define QLA2XXX_VERSION "8.02.00-k8" +#define QLA2XXX_VERSION "8.02.00-k9" #define QLA_DRIVER_MAJOR_VER 8 #define QLA_DRIVER_MINOR_VER 2 diff --git a/drivers/scsi/qla4xxx/ql4_init.c b/drivers/scsi/qla4xxx/ql4_init.c index 10b3b9a620f3..109c5f5985ec 100644 --- a/drivers/scsi/qla4xxx/ql4_init.c +++ b/drivers/scsi/qla4xxx/ql4_init.c @@ -1299,9 +1299,9 @@ int qla4xxx_process_ddb_changed(struct scsi_qla_host *ha, ddb_entry->fw_ddb_device_state = state; /* Device is back online. */ if (ddb_entry->fw_ddb_device_state == DDB_DS_SESSION_ACTIVE) { + atomic_set(&ddb_entry->state, DDB_STATE_ONLINE); atomic_set(&ddb_entry->port_down_timer, ha->port_down_retry_count); - atomic_set(&ddb_entry->state, DDB_STATE_ONLINE); atomic_set(&ddb_entry->relogin_retry_count, 0); atomic_set(&ddb_entry->relogin_timer, 0); clear_bit(DF_RELOGIN, &ddb_entry->flags); diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c index c3c59d763037..8b92f348f02c 100644 --- a/drivers/scsi/qla4xxx/ql4_os.c +++ b/drivers/scsi/qla4xxx/ql4_os.c @@ -75,6 +75,7 @@ static int qla4xxx_eh_host_reset(struct scsi_cmnd *cmd); static int qla4xxx_slave_alloc(struct scsi_device *device); static int qla4xxx_slave_configure(struct scsi_device *device); static void qla4xxx_slave_destroy(struct scsi_device *sdev); +static void qla4xxx_scan_start(struct Scsi_Host *shost); static struct scsi_host_template qla4xxx_driver_template = { .module = THIS_MODULE, @@ -90,6 +91,7 @@ static struct scsi_host_template qla4xxx_driver_template = { .slave_destroy = qla4xxx_slave_destroy, .scan_finished = iscsi_scan_finished, + .scan_start = qla4xxx_scan_start, .this_id = -1, .cmd_per_lun = 3, @@ -299,6 +301,18 @@ struct ddb_entry *qla4xxx_alloc_sess(struct scsi_qla_host *ha) return ddb_entry; } +static void qla4xxx_scan_start(struct Scsi_Host *shost) +{ + struct scsi_qla_host *ha = shost_priv(shost); + struct ddb_entry *ddb_entry, *ddbtemp; + + /* finish setup of sessions that were already setup in firmware */ + list_for_each_entry_safe(ddb_entry, ddbtemp, &ha->ddb_list, list) { + if (ddb_entry->fw_ddb_device_state == DDB_DS_SESSION_ACTIVE) + qla4xxx_add_sess(ddb_entry); + } +} + /* * Timer routines */ @@ -864,8 +878,9 @@ static void qla4xxx_flush_active_srbs(struct scsi_qla_host *ha) * qla4xxx_recover_adapter - recovers adapter after a fatal error * @ha: Pointer to host adapter structure. * @renew_ddb_list: Indicates what to do with the adapter's ddb list - * after adapter recovery has completed. - * 0=preserve ddb list, 1=destroy and rebuild ddb list + * + * renew_ddb_list value can be 0=preserve ddb list, 1=destroy and rebuild + * ddb list. **/ static int qla4xxx_recover_adapter(struct scsi_qla_host *ha, uint8_t renew_ddb_list) @@ -874,6 +889,7 @@ static int qla4xxx_recover_adapter(struct scsi_qla_host *ha, /* Stall incoming I/O until we are done */ clear_bit(AF_ONLINE, &ha->flags); + DEBUG2(printk("scsi%ld: %s calling qla4xxx_cmd_wait\n", ha->host_no, __func__)); @@ -1176,7 +1192,6 @@ static int __devinit qla4xxx_probe_adapter(struct pci_dev *pdev, int ret = -ENODEV, status; struct Scsi_Host *host; struct scsi_qla_host *ha; - struct ddb_entry *ddb_entry, *ddbtemp; uint8_t init_retry_count = 0; char buf[34]; @@ -1295,13 +1310,6 @@ static int __devinit qla4xxx_probe_adapter(struct pci_dev *pdev, if (ret) goto probe_failed; - /* Update transport device information for all devices. */ - list_for_each_entry_safe(ddb_entry, ddbtemp, &ha->ddb_list, list) { - if (ddb_entry->fw_ddb_device_state == DDB_DS_SESSION_ACTIVE) - if (qla4xxx_add_sess(ddb_entry)) - goto remove_host; - } - printk(KERN_INFO " QLogic iSCSI HBA Driver version: %s\n" " QLogic ISP%04x @ %s, host#=%ld, fw=%02d.%02d.%02d.%02d\n", @@ -1311,10 +1319,6 @@ static int __devinit qla4xxx_probe_adapter(struct pci_dev *pdev, scsi_scan_host(host); return 0; -remove_host: - qla4xxx_free_ddb_list(ha); - scsi_remove_host(host); - probe_failed: qla4xxx_free_adapter(ha); scsi_host_put(ha->host); @@ -1600,9 +1604,12 @@ static int qla4xxx_eh_host_reset(struct scsi_cmnd *cmd) return FAILED; } - if (qla4xxx_recover_adapter(ha, PRESERVE_DDB_LIST) == QLA_SUCCESS) { + /* make sure the dpc thread is stopped while we reset the hba */ + clear_bit(AF_ONLINE, &ha->flags); + flush_workqueue(ha->dpc_thread); + + if (qla4xxx_recover_adapter(ha, PRESERVE_DDB_LIST) == QLA_SUCCESS) return_status = SUCCESS; - } dev_info(&ha->pdev->dev, "HOST RESET %s.\n", return_status == FAILED ? "FAILED" : "SUCCEDED"); diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c index fecba05b4e77..e5c6f6af8765 100644 --- a/drivers/scsi/scsi.c +++ b/drivers/scsi/scsi.c @@ -757,7 +757,7 @@ void scsi_finish_command(struct scsi_cmnd *cmd) "Notifying upper driver of completion " "(result %x)\n", cmd->result)); - good_bytes = scsi_bufflen(cmd); + good_bytes = scsi_bufflen(cmd) + cmd->request->extra_len; if (cmd->request->cmd_type != REQ_TYPE_BLOCK_PC) { drv = scsi_cmd_to_driver(cmd); if (drv->done) diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c index 1dc165ad17fb..e67c14e31bab 100644 --- a/drivers/scsi/scsi_scan.c +++ b/drivers/scsi/scsi_scan.c @@ -1577,8 +1577,7 @@ static void __scsi_scan_target(struct device *parent, unsigned int channel, } /** - * scsi_scan_target - scan a target id, possibly including all LUNs on the - * target. + * scsi_scan_target - scan a target id, possibly including all LUNs on the target. * @parent: host to scan * @channel: channel to scan * @id: target id to scan diff --git a/drivers/scsi/scsi_tgt_lib.c b/drivers/scsi/scsi_tgt_lib.c index 3677fbb30b72..a0f308bd145b 100644 --- a/drivers/scsi/scsi_tgt_lib.c +++ b/drivers/scsi/scsi_tgt_lib.c @@ -103,7 +103,6 @@ struct scsi_cmnd *scsi_host_get_command(struct Scsi_Host *shost, if (!cmd) goto release_rq; - memset(cmd, 0, sizeof(*cmd)); cmd->sc_data_direction = data_dir; cmd->jiffies_at_alloc = jiffies; cmd->request = rq; @@ -382,6 +381,11 @@ static int scsi_map_user_pages(struct scsi_tgt_cmd *tcmd, struct scsi_cmnd *cmd, scsi_release_buffers(cmd); goto unmap_rq; } + /* + * we use REQ_TYPE_BLOCK_PC so scsi_init_io doesn't set the + * length for us. + */ + cmd->sdb.length = rq->data_len; return 0; diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c index 9981682d5302..ca7bb6f63bde 100644 --- a/drivers/scsi/scsi_transport_iscsi.c +++ b/drivers/scsi/scsi_transport_iscsi.c @@ -33,7 +33,7 @@ #define ISCSI_SESSION_ATTRS 19 #define ISCSI_CONN_ATTRS 13 #define ISCSI_HOST_ATTRS 4 -#define ISCSI_TRANSPORT_VERSION "2.0-868" +#define ISCSI_TRANSPORT_VERSION "2.0-869" struct iscsi_internal { int daemon_pid; @@ -373,24 +373,25 @@ static void session_recovery_timedout(struct work_struct *work) scsi_target_unblock(&session->dev); } -static void __iscsi_unblock_session(struct iscsi_cls_session *session) -{ - if (!cancel_delayed_work(&session->recovery_work)) - flush_workqueue(iscsi_eh_timer_workq); - scsi_target_unblock(&session->dev); -} - -void iscsi_unblock_session(struct iscsi_cls_session *session) +static void __iscsi_unblock_session(struct work_struct *work) { + struct iscsi_cls_session *session = + container_of(work, struct iscsi_cls_session, + unblock_work); struct Scsi_Host *shost = iscsi_session_to_shost(session); struct iscsi_host *ihost = shost->shost_data; unsigned long flags; + /* + * The recovery and unblock work get run from the same workqueue, + * so try to cancel it if it was going to run after this unblock. + */ + cancel_delayed_work(&session->recovery_work); spin_lock_irqsave(&session->lock, flags); session->state = ISCSI_SESSION_LOGGED_IN; spin_unlock_irqrestore(&session->lock, flags); - - __iscsi_unblock_session(session); + /* start IO */ + scsi_target_unblock(&session->dev); /* * Only do kernel scanning if the driver is properly hooked into * the async scanning code (drivers like iscsi_tcp do login and @@ -401,20 +402,43 @@ void iscsi_unblock_session(struct iscsi_cls_session *session) atomic_inc(&ihost->nr_scans); } } + +/** + * iscsi_unblock_session - set a session as logged in and start IO. + * @session: iscsi session + * + * Mark a session as ready to accept IO. + */ +void iscsi_unblock_session(struct iscsi_cls_session *session) +{ + queue_work(iscsi_eh_timer_workq, &session->unblock_work); + /* + * make sure all the events have completed before tell the driver + * it is safe + */ + flush_workqueue(iscsi_eh_timer_workq); +} EXPORT_SYMBOL_GPL(iscsi_unblock_session); -void iscsi_block_session(struct iscsi_cls_session *session) +static void __iscsi_block_session(struct work_struct *work) { + struct iscsi_cls_session *session = + container_of(work, struct iscsi_cls_session, + block_work); unsigned long flags; spin_lock_irqsave(&session->lock, flags); session->state = ISCSI_SESSION_FAILED; spin_unlock_irqrestore(&session->lock, flags); - scsi_target_block(&session->dev); queue_delayed_work(iscsi_eh_timer_workq, &session->recovery_work, session->recovery_tmo * HZ); } + +void iscsi_block_session(struct iscsi_cls_session *session) +{ + queue_work(iscsi_eh_timer_workq, &session->block_work); +} EXPORT_SYMBOL_GPL(iscsi_block_session); static void __iscsi_unbind_session(struct work_struct *work) @@ -463,6 +487,8 @@ iscsi_alloc_session(struct Scsi_Host *shost, INIT_DELAYED_WORK(&session->recovery_work, session_recovery_timedout); INIT_LIST_HEAD(&session->host_list); INIT_LIST_HEAD(&session->sess_list); + INIT_WORK(&session->unblock_work, __iscsi_unblock_session); + INIT_WORK(&session->block_work, __iscsi_block_session); INIT_WORK(&session->unbind_work, __iscsi_unbind_session); INIT_WORK(&session->scan_work, iscsi_scan_session); spin_lock_init(&session->lock); @@ -575,24 +601,25 @@ void iscsi_remove_session(struct iscsi_cls_session *session) list_del(&session->sess_list); spin_unlock_irqrestore(&sesslock, flags); + /* make sure there are no blocks/unblocks queued */ + flush_workqueue(iscsi_eh_timer_workq); + /* make sure the timedout callout is not running */ + if (!cancel_delayed_work(&session->recovery_work)) + flush_workqueue(iscsi_eh_timer_workq); /* * If we are blocked let commands flow again. The lld or iscsi * layer should set up the queuecommand to fail commands. + * We assume that LLD will not be calling block/unblock while + * removing the session. */ spin_lock_irqsave(&session->lock, flags); session->state = ISCSI_SESSION_FREE; spin_unlock_irqrestore(&session->lock, flags); - __iscsi_unblock_session(session); - __iscsi_unbind_session(&session->unbind_work); - /* flush running scans */ + scsi_target_unblock(&session->dev); + /* flush running scans then delete devices */ flush_workqueue(ihost->scan_workq); - /* - * If the session dropped while removing devices then we need to make - * sure it is not blocked - */ - if (!cancel_delayed_work(&session->recovery_work)) - flush_workqueue(iscsi_eh_timer_workq); + __iscsi_unbind_session(&session->unbind_work); /* hw iscsi may not have removed all connections from session */ err = device_for_each_child(&session->dev, NULL, @@ -802,23 +829,16 @@ EXPORT_SYMBOL_GPL(iscsi_recv_pdu); void iscsi_conn_error(struct iscsi_cls_conn *conn, enum iscsi_err error) { - struct iscsi_cls_session *session = iscsi_conn_to_session(conn); struct nlmsghdr *nlh; struct sk_buff *skb; struct iscsi_uevent *ev; struct iscsi_internal *priv; int len = NLMSG_SPACE(sizeof(*ev)); - unsigned long flags; priv = iscsi_if_transport_lookup(conn->transport); if (!priv) return; - spin_lock_irqsave(&session->lock, flags); - if (session->state == ISCSI_SESSION_LOGGED_IN) - session->state = ISCSI_SESSION_FAILED; - spin_unlock_irqrestore(&session->lock, flags); - skb = alloc_skb(len, GFP_ATOMIC); if (!skb) { iscsi_cls_conn_printk(KERN_ERR, conn, "gracefully ignored " diff --git a/drivers/serial/8250_pnp.c b/drivers/serial/8250_pnp.c index 6f09cbd7fc48..97c68d021d28 100644 --- a/drivers/serial/8250_pnp.c +++ b/drivers/serial/8250_pnp.c @@ -91,6 +91,8 @@ static const struct pnp_device_id pnp_dev_table[] = { /* Archtek America Corp. */ /* Archtek SmartLink Modem 3334BT Plug & Play */ { "GVC000F", 0 }, + /* Archtek SmartLink Modem 3334BRV 33.6K Data Fax Voice */ + { "GVC0303", 0 }, /* Hayes */ /* Hayes Optima 288 V.34-V.FC + FAX + Voice Plug & Play */ { "HAY0001", 0 }, diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index b82595cf13e8..cf627cd1b4c8 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -686,7 +686,7 @@ config UART0_RTS_PIN config SERIAL_BFIN_UART1 bool "Enable UART1" - depends on SERIAL_BFIN && (BF534 || BF536 || BF537 || BF54x) + depends on SERIAL_BFIN && (!BF531 && !BF532 && !BF533 && !BF561) help Enable UART1 @@ -699,14 +699,14 @@ config BFIN_UART1_CTSRTS config UART1_CTS_PIN int "UART1 CTS pin" - depends on BFIN_UART1_CTSRTS && (BF53x || BF561) + depends on BFIN_UART1_CTSRTS && !BF54x default -1 help Refer to ./include/asm-blackfin/gpio.h to see the GPIO map. config UART1_RTS_PIN int "UART1 RTS pin" - depends on BFIN_UART1_CTSRTS && (BF53x || BF561) + depends on BFIN_UART1_CTSRTS && !BF54x default -1 help Refer to ./include/asm-blackfin/gpio.h to see the GPIO map. diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c index ac2a3ef28d55..0aa345b9a38b 100644 --- a/drivers/serial/bfin_5xx.c +++ b/drivers/serial/bfin_5xx.c @@ -1,30 +1,11 @@ /* - * File: drivers/serial/bfin_5xx.c - * Based on: Based on drivers/serial/sa1100.c - * Author: Aubrey Li <aubrey.li@analog.com> + * Blackfin On-Chip Serial Driver * - * Created: - * Description: Driver for blackfin 5xx serial ports + * Copyright 2006-2007 Analog Devices Inc. * - * Modified: - * Copyright 2006 Analog Devices Inc. + * Enter bugs at http://blackfin.uclinux.org/ * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 or later. */ #if defined(CONFIG_SERIAL_BFIN_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) @@ -67,14 +48,12 @@ #define DMA_RX_XCOUNT 512 #define DMA_RX_YCOUNT (PAGE_SIZE / DMA_RX_XCOUNT) -#define DMA_RX_FLUSH_JIFFIES 5 +#define DMA_RX_FLUSH_JIFFIES (HZ / 50) #ifdef CONFIG_SERIAL_BFIN_DMA static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart); #else -static void bfin_serial_do_work(struct work_struct *work); static void bfin_serial_tx_chars(struct bfin_serial_port *uart); -static void local_put_char(struct bfin_serial_port *uart, char ch); #endif static void bfin_serial_mctrl_check(struct bfin_serial_port *uart); @@ -85,23 +64,26 @@ static void bfin_serial_mctrl_check(struct bfin_serial_port *uart); static void bfin_serial_stop_tx(struct uart_port *port) { struct bfin_serial_port *uart = (struct bfin_serial_port *)port; + struct circ_buf *xmit = &uart->port.info->xmit; +#if !defined(CONFIG_BF54x) && !defined(CONFIG_SERIAL_BFIN_DMA) + unsigned short ier; +#endif while (!(UART_GET_LSR(uart) & TEMT)) - continue; + cpu_relax(); #ifdef CONFIG_SERIAL_BFIN_DMA disable_dma(uart->tx_dma_channel); + xmit->tail = (xmit->tail + uart->tx_count) & (UART_XMIT_SIZE - 1); + uart->port.icount.tx += uart->tx_count; + uart->tx_count = 0; + uart->tx_done = 1; #else #ifdef CONFIG_BF54x - /* Waiting for Transmission Finished */ - while (!(UART_GET_LSR(uart) & TFI)) - continue; /* Clear TFI bit */ UART_PUT_LSR(uart, TFI); UART_CLEAR_IER(uart, ETBEI); #else - unsigned short ier; - ier = UART_GET_IER(uart); ier &= ~ETBEI; UART_PUT_IER(uart, ier); @@ -117,7 +99,8 @@ static void bfin_serial_start_tx(struct uart_port *port) struct bfin_serial_port *uart = (struct bfin_serial_port *)port; #ifdef CONFIG_SERIAL_BFIN_DMA - bfin_serial_dma_tx_chars(uart); + if (uart->tx_done) + bfin_serial_dma_tx_chars(uart); #else #ifdef CONFIG_BF54x UART_SET_IER(uart, ETBEI); @@ -209,34 +192,27 @@ int kgdb_get_debug_char(void) } #endif -#ifdef CONFIG_SERIAL_BFIN_PIO -static void local_put_char(struct bfin_serial_port *uart, char ch) -{ - unsigned short status; - int flags = 0; - - spin_lock_irqsave(&uart->port.lock, flags); - - do { - status = UART_GET_LSR(uart); - } while (!(status & THRE)); - - UART_PUT_CHAR(uart, ch); - SSYNC(); - - spin_unlock_irqrestore(&uart->port.lock, flags); -} +#if ANOMALY_05000230 && defined(CONFIG_SERIAL_BFIN_PIO) +# define UART_GET_ANOMALY_THRESHOLD(uart) ((uart)->anomaly_threshold) +# define UART_SET_ANOMALY_THRESHOLD(uart, v) ((uart)->anomaly_threshold = (v)) +#else +# define UART_GET_ANOMALY_THRESHOLD(uart) 0 +# define UART_SET_ANOMALY_THRESHOLD(uart, v) +#endif +#ifdef CONFIG_SERIAL_BFIN_PIO static void bfin_serial_rx_chars(struct bfin_serial_port *uart) { struct tty_struct *tty = uart->port.info->tty; unsigned int status, ch, flg; - static int in_break = 0; + static struct timeval anomaly_start = { .tv_sec = 0 }; #ifdef CONFIG_KGDB_UART struct pt_regs *regs = get_irq_regs(); #endif status = UART_GET_LSR(uart); + UART_CLEAR_LSR(uart); + ch = UART_GET_CHAR(uart); uart->port.icount.rx++; @@ -262,28 +238,56 @@ static void bfin_serial_rx_chars(struct bfin_serial_port *uart) #endif if (ANOMALY_05000230) { - /* The BF533 family of processors have a nice misbehavior where - * they continuously generate characters for a "single" break. + /* The BF533 (and BF561) family of processors have a nice anomaly + * where they continuously generate characters for a "single" break. * We have to basically ignore this flood until the "next" valid - * character comes across. All other Blackfin families operate - * properly though. + * character comes across. Due to the nature of the flood, it is + * not possible to reliably catch bytes that are sent too quickly + * after this break. So application code talking to the Blackfin + * which sends a break signal must allow at least 1.5 character + * times after the end of the break for things to stabilize. This + * timeout was picked as it must absolutely be larger than 1 + * character time +/- some percent. So 1.5 sounds good. All other + * Blackfin families operate properly. Woo. * Note: While Anomaly 05000230 does not directly address this, * the changes that went in for it also fixed this issue. + * That anomaly was fixed in 0.5+ silicon. I like bunnies. */ - if (in_break) { - if (ch != 0) { - in_break = 0; - ch = UART_GET_CHAR(uart); - if (bfin_revid() < 5) - return; - } else - return; + if (anomaly_start.tv_sec) { + struct timeval curr; + suseconds_t usecs; + + if ((~ch & (~ch + 1)) & 0xff) + goto known_good_char; + + do_gettimeofday(&curr); + if (curr.tv_sec - anomaly_start.tv_sec > 1) + goto known_good_char; + + usecs = 0; + if (curr.tv_sec != anomaly_start.tv_sec) + usecs += USEC_PER_SEC; + usecs += curr.tv_usec - anomaly_start.tv_usec; + + if (usecs > UART_GET_ANOMALY_THRESHOLD(uart)) + goto known_good_char; + + if (ch) + anomaly_start.tv_sec = 0; + else + anomaly_start = curr; + + return; + + known_good_char: + anomaly_start.tv_sec = 0; } } if (status & BI) { if (ANOMALY_05000230) - in_break = 1; + if (bfin_revid() < 5) + do_gettimeofday(&anomaly_start); uart->port.icount.brk++; if (uart_handle_break(&uart->port)) goto ignore_char; @@ -324,7 +328,6 @@ static void bfin_serial_tx_chars(struct bfin_serial_port *uart) UART_PUT_CHAR(uart, uart->port.x_char); uart->port.icount.tx++; uart->port.x_char = 0; - return; } /* * Check the modem control lines before @@ -337,9 +340,12 @@ static void bfin_serial_tx_chars(struct bfin_serial_port *uart) return; } - local_put_char(uart, xmit->buf[xmit->tail]); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - uart->port.icount.tx++; + while ((UART_GET_LSR(uart) & THRE) && xmit->tail != xmit->head) { + UART_PUT_CHAR(uart, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + uart->port.icount.tx++; + SSYNC(); + } if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) uart_write_wakeup(&uart->port); @@ -352,21 +358,11 @@ static irqreturn_t bfin_serial_rx_int(int irq, void *dev_id) { struct bfin_serial_port *uart = dev_id; -#ifdef CONFIG_BF54x - unsigned short status; - spin_lock(&uart->port.lock); - status = UART_GET_LSR(uart); - while ((UART_GET_IER(uart) & ERBFI) && (status & DR)) { - bfin_serial_rx_chars(uart); - status = UART_GET_LSR(uart); - } - spin_unlock(&uart->port.lock); -#else spin_lock(&uart->port.lock); - while ((UART_GET_IIR(uart) & IIR_STATUS) == IIR_RX_READY) + while (UART_GET_LSR(uart) & DR) bfin_serial_rx_chars(uart); spin_unlock(&uart->port.lock); -#endif + return IRQ_HANDLED; } @@ -374,25 +370,16 @@ static irqreturn_t bfin_serial_tx_int(int irq, void *dev_id) { struct bfin_serial_port *uart = dev_id; -#ifdef CONFIG_BF54x - unsigned short status; spin_lock(&uart->port.lock); - status = UART_GET_LSR(uart); - while ((UART_GET_IER(uart) & ETBEI) && (status & THRE)) { + if (UART_GET_LSR(uart) & THRE) bfin_serial_tx_chars(uart); - status = UART_GET_LSR(uart); - } spin_unlock(&uart->port.lock); -#else - spin_lock(&uart->port.lock); - while ((UART_GET_IIR(uart) & IIR_STATUS) == IIR_TX_READY) - bfin_serial_tx_chars(uart); - spin_unlock(&uart->port.lock); -#endif + return IRQ_HANDLED; } +#endif - +#ifdef CONFIG_SERIAL_BFIN_CTSRTS static void bfin_serial_do_work(struct work_struct *work) { struct bfin_serial_port *uart = container_of(work, struct bfin_serial_port, cts_workqueue); @@ -406,33 +393,27 @@ static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart) { struct circ_buf *xmit = &uart->port.info->xmit; unsigned short ier; - int flags = 0; - - if (!uart->tx_done) - return; uart->tx_done = 0; + if (uart_circ_empty(xmit) || uart_tx_stopped(&uart->port)) { + uart->tx_count = 0; + uart->tx_done = 1; + return; + } + if (uart->port.x_char) { UART_PUT_CHAR(uart, uart->port.x_char); uart->port.icount.tx++; uart->port.x_char = 0; - uart->tx_done = 1; - return; } + /* * Check the modem control lines before * transmitting anything. */ bfin_serial_mctrl_check(uart); - if (uart_circ_empty(xmit) || uart_tx_stopped(&uart->port)) { - bfin_serial_stop_tx(&uart->port); - uart->tx_done = 1; - return; - } - - spin_lock_irqsave(&uart->port.lock, flags); uart->tx_count = CIRC_CNT(xmit->head, xmit->tail, UART_XMIT_SIZE); if (uart->tx_count > (UART_XMIT_SIZE - xmit->tail)) uart->tx_count = UART_XMIT_SIZE - xmit->tail; @@ -448,6 +429,7 @@ static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart) set_dma_x_count(uart->tx_dma_channel, uart->tx_count); set_dma_x_modify(uart->tx_dma_channel, 1); enable_dma(uart->tx_dma_channel); + #ifdef CONFIG_BF54x UART_SET_IER(uart, ETBEI); #else @@ -455,7 +437,6 @@ static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart) ier |= ETBEI; UART_PUT_IER(uart, ier); #endif - spin_unlock_irqrestore(&uart->port.lock, flags); } static void bfin_serial_dma_rx_chars(struct bfin_serial_port *uart) @@ -464,7 +445,11 @@ static void bfin_serial_dma_rx_chars(struct bfin_serial_port *uart) int i, flg, status; status = UART_GET_LSR(uart); - uart->port.icount.rx += CIRC_CNT(uart->rx_dma_buf.head, uart->rx_dma_buf.tail, UART_XMIT_SIZE);; + UART_CLEAR_LSR(uart); + + uart->port.icount.rx += + CIRC_CNT(uart->rx_dma_buf.head, uart->rx_dma_buf.tail, + UART_XMIT_SIZE); if (status & BI) { uart->port.icount.brk++; @@ -490,10 +475,12 @@ static void bfin_serial_dma_rx_chars(struct bfin_serial_port *uart) else flg = TTY_NORMAL; - for (i = uart->rx_dma_buf.head; i < uart->rx_dma_buf.tail; i++) { - if (uart_handle_sysrq_char(&uart->port, uart->rx_dma_buf.buf[i])) - goto dma_ignore_char; - uart_insert_char(&uart->port, status, OE, uart->rx_dma_buf.buf[i], flg); + for (i = uart->rx_dma_buf.tail; i != uart->rx_dma_buf.head; i++) { + if (i >= UART_XMIT_SIZE) + i = 0; + if (!uart_handle_sysrq_char(&uart->port, uart->rx_dma_buf.buf[i])) + uart_insert_char(&uart->port, status, OE, + uart->rx_dma_buf.buf[i], flg); } dma_ignore_char: @@ -503,23 +490,23 @@ static void bfin_serial_dma_rx_chars(struct bfin_serial_port *uart) void bfin_serial_rx_dma_timeout(struct bfin_serial_port *uart) { int x_pos, pos; - int flags = 0; - - bfin_serial_dma_tx_chars(uart); - spin_lock_irqsave(&uart->port.lock, flags); - x_pos = DMA_RX_XCOUNT - get_dma_curr_xcount(uart->rx_dma_channel); + uart->rx_dma_nrows = get_dma_curr_ycount(uart->rx_dma_channel); + x_pos = get_dma_curr_xcount(uart->rx_dma_channel); + uart->rx_dma_nrows = DMA_RX_YCOUNT - uart->rx_dma_nrows; + if (uart->rx_dma_nrows == DMA_RX_YCOUNT) + uart->rx_dma_nrows = 0; + x_pos = DMA_RX_XCOUNT - x_pos; if (x_pos == DMA_RX_XCOUNT) x_pos = 0; pos = uart->rx_dma_nrows * DMA_RX_XCOUNT + x_pos; - - if (pos>uart->rx_dma_buf.tail) { - uart->rx_dma_buf.tail = pos; + if (pos != uart->rx_dma_buf.tail) { + uart->rx_dma_buf.head = pos; bfin_serial_dma_rx_chars(uart); - uart->rx_dma_buf.head = uart->rx_dma_buf.tail; + uart->rx_dma_buf.tail = uart->rx_dma_buf.head; } - spin_unlock_irqrestore(&uart->port.lock, flags); + uart->rx_dma_timer.expires = jiffies + DMA_RX_FLUSH_JIFFIES; add_timer(&(uart->rx_dma_timer)); } @@ -532,8 +519,8 @@ static irqreturn_t bfin_serial_dma_tx_int(int irq, void *dev_id) spin_lock(&uart->port.lock); if (!(get_dma_curr_irqstat(uart->tx_dma_channel)&DMA_RUN)) { - clear_dma_irqstat(uart->tx_dma_channel); disable_dma(uart->tx_dma_channel); + clear_dma_irqstat(uart->tx_dma_channel); #ifdef CONFIG_BF54x UART_CLEAR_IER(uart, ETBEI); #else @@ -541,15 +528,13 @@ static irqreturn_t bfin_serial_dma_tx_int(int irq, void *dev_id) ier &= ~ETBEI; UART_PUT_IER(uart, ier); #endif - xmit->tail = (xmit->tail+uart->tx_count) &(UART_XMIT_SIZE -1); - uart->port.icount.tx+=uart->tx_count; + xmit->tail = (xmit->tail + uart->tx_count) & (UART_XMIT_SIZE - 1); + uart->port.icount.tx += uart->tx_count; if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) uart_write_wakeup(&uart->port); - if (uart_circ_empty(xmit)) - bfin_serial_stop_tx(&uart->port); - uart->tx_done = 1; + bfin_serial_dma_tx_chars(uart); } spin_unlock(&uart->port.lock); @@ -561,18 +546,15 @@ static irqreturn_t bfin_serial_dma_rx_int(int irq, void *dev_id) struct bfin_serial_port *uart = dev_id; unsigned short irqstat; - uart->rx_dma_nrows++; - if (uart->rx_dma_nrows == DMA_RX_YCOUNT) { - uart->rx_dma_nrows = 0; - uart->rx_dma_buf.tail = DMA_RX_XCOUNT*DMA_RX_YCOUNT; - bfin_serial_dma_rx_chars(uart); - uart->rx_dma_buf.head = uart->rx_dma_buf.tail = 0; - } spin_lock(&uart->port.lock); irqstat = get_dma_curr_irqstat(uart->rx_dma_channel); clear_dma_irqstat(uart->rx_dma_channel); - spin_unlock(&uart->port.lock); + + del_timer(&(uart->rx_dma_timer)); + uart->rx_dma_timer.expires = jiffies; + add_timer(&(uart->rx_dma_timer)); + return IRQ_HANDLED; } #endif @@ -599,7 +581,11 @@ static unsigned int bfin_serial_get_mctrl(struct uart_port *port) if (uart->cts_pin < 0) return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; +# ifdef BF54x + if (UART_GET_MSR(uart) & CTS) +# else if (gpio_get_value(uart->cts_pin)) +# endif return TIOCM_DSR | TIOCM_CAR; else #endif @@ -614,9 +600,17 @@ static void bfin_serial_set_mctrl(struct uart_port *port, unsigned int mctrl) return; if (mctrl & TIOCM_RTS) +# ifdef BF54x + UART_PUT_MCR(uart, UART_GET_MCR(uart) & ~MRTS); +# else gpio_set_value(uart->rts_pin, 0); +# endif else +# ifdef BF54x + UART_PUT_MCR(uart, UART_GET_MCR(uart) | MRTS); +# else gpio_set_value(uart->rts_pin, 1); +# endif #endif } @@ -627,22 +621,17 @@ static void bfin_serial_mctrl_check(struct bfin_serial_port *uart) { #ifdef CONFIG_SERIAL_BFIN_CTSRTS unsigned int status; -# ifdef CONFIG_SERIAL_BFIN_DMA struct uart_info *info = uart->port.info; struct tty_struct *tty = info->tty; status = bfin_serial_get_mctrl(&uart->port); + uart_handle_cts_change(&uart->port, status & TIOCM_CTS); if (!(status & TIOCM_CTS)) { tty->hw_stopped = 1; + schedule_work(&uart->cts_workqueue); } else { tty->hw_stopped = 0; } -# else - status = bfin_serial_get_mctrl(&uart->port); - uart_handle_cts_change(&uart->port, status & TIOCM_CTS); - if (!(status & TIOCM_CTS)) - schedule_work(&uart->cts_workqueue); -# endif #endif } @@ -743,6 +732,7 @@ static void bfin_serial_shutdown(struct uart_port *port) disable_dma(uart->rx_dma_channel); free_dma(uart->rx_dma_channel); del_timer(&(uart->rx_dma_timer)); + dma_free_coherent(NULL, PAGE_SIZE, uart->rx_dma_buf.buf, 0); #else #ifdef CONFIG_KGDB_UART if (uart->port.line != CONFIG_KGDB_UART_PORT) @@ -814,6 +804,8 @@ bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios, quot = uart_get_divisor(port, baud); spin_lock_irqsave(&uart->port.lock, flags); + UART_SET_ANOMALY_THRESHOLD(uart, USEC_PER_SEC / baud * 15); + do { lsr = UART_GET_LSR(uart); } while (!(lsr & TEMT)); @@ -956,10 +948,9 @@ static void __init bfin_serial_init_ports(void) bfin_serial_ports[i].rx_dma_channel = bfin_serial_resource[i].uart_rx_dma_channel; init_timer(&(bfin_serial_ports[i].rx_dma_timer)); -#else - INIT_WORK(&bfin_serial_ports[i].cts_workqueue, bfin_serial_do_work); #endif #ifdef CONFIG_SERIAL_BFIN_CTSRTS + INIT_WORK(&bfin_serial_ports[i].cts_workqueue, bfin_serial_do_work); bfin_serial_ports[i].cts_pin = bfin_serial_resource[i].uart_cts_pin; bfin_serial_ports[i].rts_pin = diff --git a/drivers/serial/m32r_sio.c b/drivers/serial/m32r_sio.c index 348ee2c19b58..c2bb11c02bde 100644 --- a/drivers/serial/m32r_sio.c +++ b/drivers/serial/m32r_sio.c @@ -421,7 +421,7 @@ static void transmit_chars(struct uart_sio_port *up) up->port.icount.tx++; if (uart_circ_empty(xmit)) break; - while (!serial_in(up, UART_LSR) & UART_LSR_THRE); + while (!(serial_in(up, UART_LSR) & UART_LSR_THRE)); } while (--count > 0); diff --git a/drivers/serial/of_serial.c b/drivers/serial/of_serial.c index a64d85821996..c0e50a461055 100644 --- a/drivers/serial/of_serial.c +++ b/drivers/serial/of_serial.c @@ -138,7 +138,7 @@ static struct of_device_id __devinitdata of_platform_serial_table[] = { { /* end of list */ }, }; -static struct of_platform_driver __devinitdata of_platform_serial_driver = { +static struct of_platform_driver of_platform_serial_driver = { .owner = THIS_MODULE, .name = "of_serial", .probe = of_platform_serial_probe, diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index 9ce12cb2cebc..a8c116b80bff 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -41,6 +41,7 @@ #include <linux/delay.h> #include <linux/console.h> #include <linux/platform_device.h> +#include <linux/serial_sci.h> #ifdef CONFIG_CPU_FREQ #include <linux/notifier.h> @@ -54,7 +55,6 @@ #include <asm/kgdb.h> #endif -#include <asm/sci.h> #include "sh-sci.h" struct sci_port { diff --git a/drivers/sh/maple/maple.c b/drivers/sh/maple/maple.c index 9cfcfd8dad5e..617efb1640b1 100644 --- a/drivers/sh/maple/maple.c +++ b/drivers/sh/maple/maple.c @@ -1,7 +1,7 @@ /* * Core maple bus functionality * - * Copyright (C) 2007 Adrian McMenamin + * Copyright (C) 2007, 2008 Adrian McMenamin * * Based on 2.4 code by: * @@ -18,7 +18,6 @@ #include <linux/init.h> #include <linux/kernel.h> #include <linux/device.h> -#include <linux/module.h> #include <linux/interrupt.h> #include <linux/list.h> #include <linux/io.h> @@ -54,7 +53,7 @@ static struct device maple_bus; static int subdevice_map[MAPLE_PORTS]; static unsigned long *maple_sendbuf, *maple_sendptr, *maple_lastptr; static unsigned long maple_pnp_time; -static int started, scanning, liststatus, realscan; +static int started, scanning, liststatus, fullscan; static struct kmem_cache *maple_queue_cache; struct maple_device_specify { @@ -62,6 +61,9 @@ struct maple_device_specify { int unit; }; +static bool checked[4]; +static struct maple_device *baseunits[4]; + /** * maple_driver_register - register a device driver * automatically makes the driver bus a maple bus @@ -309,11 +311,9 @@ static void maple_attach_driver(struct maple_device *mdev) else break; - if (realscan) { - printk(KERN_INFO "Maple device detected: %s\n", - mdev->product_name); - printk(KERN_INFO "Maple device: %s\n", mdev->product_licence); - } + printk(KERN_INFO "Maple device detected: %s\n", + mdev->product_name); + printk(KERN_INFO "Maple device: %s\n", mdev->product_licence); function = be32_to_cpu(mdev->devinfo.function); @@ -323,10 +323,9 @@ static void maple_attach_driver(struct maple_device *mdev) mdev->driver = &maple_dummy_driver; sprintf(mdev->dev.bus_id, "%d:0.port", mdev->port); } else { - if (realscan) - printk(KERN_INFO - "Maple bus at (%d, %d): Function 0x%lX\n", - mdev->port, mdev->unit, function); + printk(KERN_INFO + "Maple bus at (%d, %d): Function 0x%lX\n", + mdev->port, mdev->unit, function); matched = bus_for_each_drv(&maple_bus_type, NULL, mdev, @@ -334,9 +333,8 @@ static void maple_attach_driver(struct maple_device *mdev) if (matched == 0) { /* Driver does not exist yet */ - if (realscan) - printk(KERN_INFO - "No maple driver found.\n"); + printk(KERN_INFO + "No maple driver found.\n"); mdev->driver = &maple_dummy_driver; } sprintf(mdev->dev.bus_id, "%d:0%d.%lX", mdev->port, @@ -472,9 +470,12 @@ static void maple_response_none(struct maple_device *mdev, maple_detach_driver(mdev); return; } - if (!started) { - printk(KERN_INFO "No maple devices attached to port %d\n", - mdev->port); + if (!started || !fullscan) { + if (checked[mdev->port] == false) { + checked[mdev->port] = true; + printk(KERN_INFO "No maple devices attached" + " to port %d\n", mdev->port); + } return; } maple_clean_submap(mdev); @@ -485,8 +486,14 @@ static void maple_response_devinfo(struct maple_device *mdev, char *recvbuf) { char submask; - if ((!started) || (scanning == 2)) { - maple_attach_driver(mdev); + if (!started || (scanning == 2) || !fullscan) { + if ((mdev->unit == 0) && (checked[mdev->port] == false)) { + checked[mdev->port] = true; + maple_attach_driver(mdev); + } else { + if (mdev->unit != 0) + maple_attach_driver(mdev); + } return; } if (mdev->unit == 0) { @@ -505,6 +512,7 @@ static void maple_dma_handler(struct work_struct *work) struct maple_device *dev; char *recvbuf; enum maple_code code; + int i; if (!maple_dma_done()) return; @@ -557,6 +565,19 @@ static void maple_dma_handler(struct work_struct *work) } else scanning = 0; + if (!fullscan) { + fullscan = 1; + for (i = 0; i < MAPLE_PORTS; i++) { + if (checked[i] == false) { + fullscan = 0; + dev = baseunits[i]; + dev->mq->command = + MAPLE_COMMAND_DEVINFO; + dev->mq->length = 0; + maple_add_packet(dev->mq); + } + } + } if (started == 0) started = 1; } @@ -694,7 +715,9 @@ static int __init maple_bus_init(void) /* setup maple ports */ for (i = 0; i < MAPLE_PORTS; i++) { + checked[i] = false; mdev[i] = maple_alloc_dev(i, 0); + baseunits[i] = mdev[i]; if (!mdev[i]) { while (i-- > 0) maple_free_dev(mdev[i]); @@ -703,12 +726,9 @@ static int __init maple_bus_init(void) mdev[i]->mq->command = MAPLE_COMMAND_DEVINFO; mdev[i]->mq->length = 0; maple_add_packet(mdev[i]->mq); - /* delay aids hardware detection */ - mdelay(5); subdevice_map[i] = 0; } - realscan = 1; /* setup maplebus hardware */ maplebus_dma_reset(); /* initial detection */ diff --git a/drivers/spi/mpc52xx_psc_spi.c b/drivers/spi/mpc52xx_psc_spi.c index 253ed5682a6d..a86315a0c5b8 100644 --- a/drivers/spi/mpc52xx_psc_spi.c +++ b/drivers/spi/mpc52xx_psc_spi.c @@ -42,6 +42,7 @@ struct mpc52xx_psc_spi { /* driver internal data */ struct mpc52xx_psc __iomem *psc; + struct mpc52xx_psc_fifo __iomem *fifo; unsigned int irq; u8 bits_per_word; u8 busy; @@ -139,6 +140,7 @@ static int mpc52xx_psc_spi_transfer_rxtx(struct spi_device *spi, { struct mpc52xx_psc_spi *mps = spi_master_get_devdata(spi->master); struct mpc52xx_psc __iomem *psc = mps->psc; + struct mpc52xx_psc_fifo __iomem *fifo = mps->fifo; unsigned rb = 0; /* number of bytes receieved */ unsigned sb = 0; /* number of bytes sent */ unsigned char *rx_buf = (unsigned char *)t->rx_buf; @@ -190,11 +192,11 @@ static int mpc52xx_psc_spi_transfer_rxtx(struct spi_device *spi, out_8(&psc->mode, 0); } else { out_8(&psc->mode, MPC52xx_PSC_MODE_FFULL); - out_be16(&psc->rfalarm, rfalarm); + out_be16(&fifo->rfalarm, rfalarm); } out_be16(&psc->mpc52xx_psc_imr, MPC52xx_PSC_IMR_RXRDY); wait_for_completion(&mps->done); - recv_at_once = in_be16(&psc->rfnum); + recv_at_once = in_be16(&fifo->rfnum); dev_dbg(&spi->dev, "%d bytes received\n", recv_at_once); send_at_once = recv_at_once; @@ -331,6 +333,7 @@ static void mpc52xx_psc_spi_cleanup(struct spi_device *spi) static int mpc52xx_psc_spi_port_config(int psc_id, struct mpc52xx_psc_spi *mps) { struct mpc52xx_psc __iomem *psc = mps->psc; + struct mpc52xx_psc_fifo __iomem *fifo = mps->fifo; u32 mclken_div; int ret = 0; @@ -346,7 +349,7 @@ static int mpc52xx_psc_spi_port_config(int psc_id, struct mpc52xx_psc_spi *mps) /* Disable interrupts, interrupts are based on alarm level */ out_be16(&psc->mpc52xx_psc_imr, 0); out_8(&psc->command, MPC52xx_PSC_SEL_MODE_REG_1); - out_8(&psc->rfcntl, 0); + out_8(&fifo->rfcntl, 0); out_8(&psc->mode, MPC52xx_PSC_MODE_FFULL); /* Configure 8bit codec mode as a SPI master and use EOF flags */ @@ -419,6 +422,8 @@ static int __init mpc52xx_psc_spi_do_probe(struct device *dev, u32 regaddr, ret = -EFAULT; goto free_master; } + /* On the 5200, fifo regs are immediately ajacent to the psc regs */ + mps->fifo = ((void __iomem *)mps->psc) + sizeof(struct mpc52xx_psc); ret = request_irq(mps->irq, mpc52xx_psc_spi_isr, 0, "mpc52xx-psc-spi", mps); diff --git a/drivers/ssb/Kconfig b/drivers/ssb/Kconfig index 78fd33125e02..adea792fb675 100644 --- a/drivers/ssb/Kconfig +++ b/drivers/ssb/Kconfig @@ -35,6 +35,11 @@ config SSB_PCIHOST If unsure, say Y +config SSB_B43_PCI_BRIDGE + bool + depends on SSB_PCIHOST + default n + config SSB_PCMCIAHOST_POSSIBLE bool depends on SSB && (PCMCIA = y || PCMCIA = SSB) && EXPERIMENTAL diff --git a/drivers/ssb/Makefile b/drivers/ssb/Makefile index e235144add7c..de94c2eb7a37 100644 --- a/drivers/ssb/Makefile +++ b/drivers/ssb/Makefile @@ -14,6 +14,6 @@ ssb-$(CONFIG_SSB_DRIVER_PCICORE) += driver_pcicore.o # b43 pci-ssb-bridge driver # Not strictly a part of SSB, but kept here for convenience -ssb-$(CONFIG_SSB_PCIHOST) += b43_pci_bridge.o +ssb-$(CONFIG_SSB_B43_PCI_BRIDGE) += b43_pci_bridge.o obj-$(CONFIG_SSB) += ssb.o diff --git a/drivers/ssb/driver_pcicore.c b/drivers/ssb/driver_pcicore.c index 6d99a9880055..74b9a8aea52b 100644 --- a/drivers/ssb/driver_pcicore.c +++ b/drivers/ssb/driver_pcicore.c @@ -111,7 +111,10 @@ static void __init ssb_fixup_pcibridge(struct pci_dev *dev) /* Enable PCI bridge bus mastering and memory space */ pci_set_master(dev); - pcibios_enable_device(dev, ~0); + if (pcibios_enable_device(dev, ~0) < 0) { + ssb_printk(KERN_ERR "PCI: SSB bridge enable failed\n"); + return; + } /* Enable PCI bridge BAR1 prefetch and burst */ pci_write_config_dword(dev, SSB_BAR1_CONTROL, 3); @@ -393,7 +396,7 @@ static int pcicore_is_in_hostmode(struct ssb_pcicore *pc) chipid_top != 0x5300) return 0; - if (bus->sprom.r1.boardflags_lo & SSB_PCICORE_BFL_NOPCI) + if (bus->sprom.boardflags_lo & SSB_PCICORE_BFL_NOPCI) return 0; /* The 200-pin BCM4712 package does not bond out PCI. Even when diff --git a/drivers/ssb/ssb_private.h b/drivers/ssb/ssb_private.h index a789364264a6..21eca2b5118b 100644 --- a/drivers/ssb/ssb_private.h +++ b/drivers/ssb/ssb_private.h @@ -120,10 +120,10 @@ extern int ssb_devices_thaw(struct ssb_bus *bus); extern struct ssb_bus *ssb_pci_dev_to_bus(struct pci_dev *pdev); /* b43_pci_bridge.c */ -#ifdef CONFIG_SSB_PCIHOST +#ifdef CONFIG_SSB_B43_PCI_BRIDGE extern int __init b43_pci_ssb_bridge_init(void); extern void __exit b43_pci_ssb_bridge_exit(void); -#else /* CONFIG_SSB_PCIHOST */ +#else /* CONFIG_SSB_B43_PCI_BRIDGR */ static inline int b43_pci_ssb_bridge_init(void) { return 0; diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig index 5c33cdb9cac7..a2b0aa48b8ea 100644 --- a/drivers/usb/core/Kconfig +++ b/drivers/usb/core/Kconfig @@ -87,12 +87,13 @@ config USB_DYNAMIC_MINORS If you are unsure about this, say N here. config USB_SUSPEND - bool "USB selective suspend/resume and wakeup (EXPERIMENTAL)" - depends on USB && PM && EXPERIMENTAL + bool "USB selective suspend/resume and wakeup" + depends on USB && PM help If you say Y here, you can use driver calls or the sysfs - "power/state" file to suspend or resume individual USB - peripherals. + "power/level" file to suspend or resume individual USB + peripherals and to enable or disable autosuspend (see + Documentation/usb/power-management.txt for more details). Also, USB "remote wakeup" signaling is supported, whereby some USB devices (like keyboards and network adapters) can wake up diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index f90ab5e94c58..d9d1eb19f2a1 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -28,35 +28,38 @@ * devices is broken... */ static const struct usb_device_id usb_quirk_list[] = { - /* Action Semiconductor flash disk */ - { USB_DEVICE(0x10d6, 0x2200), .driver_info = USB_QUIRK_STRING_FETCH_255}, - /* CBM - Flash disk */ { USB_DEVICE(0x0204, 0x6025), .driver_info = USB_QUIRK_RESET_RESUME }, + /* HP 5300/5370C scanner */ - { USB_DEVICE(0x03f0, 0x0701), .driver_info = USB_QUIRK_STRING_FETCH_255 }, + { USB_DEVICE(0x03f0, 0x0701), .driver_info = + USB_QUIRK_STRING_FETCH_255 }, /* Creative SB Audigy 2 NX */ { USB_DEVICE(0x041e, 0x3020), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Philips PSC805 audio device */ + { USB_DEVICE(0x0471, 0x0155), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Roland SC-8820 */ { USB_DEVICE(0x0582, 0x0007), .driver_info = USB_QUIRK_RESET_RESUME }, /* Edirol SD-20 */ { USB_DEVICE(0x0582, 0x0027), .driver_info = USB_QUIRK_RESET_RESUME }, - /* INTEL VALUE SSD */ - { USB_DEVICE(0x8086, 0xf1a5), .driver_info = USB_QUIRK_RESET_RESUME }, - /* M-Systems Flash Disk Pioneers */ { USB_DEVICE(0x08ec, 0x1000), .driver_info = USB_QUIRK_RESET_RESUME }, - /* Philips PSC805 audio device */ - { USB_DEVICE(0x0471, 0x0155), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Action Semiconductor flash disk */ + { USB_DEVICE(0x10d6, 0x2200), .driver_info = + USB_QUIRK_STRING_FETCH_255 }, /* SKYMEDI USB_DRIVE */ { USB_DEVICE(0x1516, 0x8628), .driver_info = USB_QUIRK_RESET_RESUME }, + /* INTEL VALUE SSD */ + { USB_DEVICE(0x8086, 0xf1a5), .driver_info = USB_QUIRK_RESET_RESUME }, + { } /* terminating entry must be last */ }; diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c index 4e984060c984..1f0db51190cc 100644 --- a/drivers/usb/core/usb.c +++ b/drivers/usb/core/usb.c @@ -99,8 +99,7 @@ struct usb_interface *usb_ifnum_to_if(const struct usb_device *dev, EXPORT_SYMBOL_GPL(usb_ifnum_to_if); /** - * usb_altnum_to_altsetting - get the altsetting structure with a given - * alternate setting number. + * usb_altnum_to_altsetting - get the altsetting structure with a given alternate setting number. * @intf: the interface containing the altsetting in question * @altnum: the desired alternate setting number * @@ -234,7 +233,7 @@ static int ksuspend_usb_init(void) * singlethreaded. Its job doesn't justify running on more * than one CPU. */ - ksuspend_usb_wq = create_singlethread_workqueue("ksuspend_usbd"); + ksuspend_usb_wq = create_freezeable_workqueue("ksuspend_usbd"); if (!ksuspend_usb_wq) return -ENOMEM; return 0; @@ -442,8 +441,7 @@ EXPORT_SYMBOL_GPL(usb_put_intf); */ /** - * usb_lock_device_for_reset - cautiously acquire the lock for a - * usb device structure + * usb_lock_device_for_reset - cautiously acquire the lock for a usb device structure * @udev: device that's being locked * @iface: interface bound to the driver making the request (optional) * diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index c13955164686..6f45dd669b33 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -131,7 +131,7 @@ config USB_ATMEL_USBA config USB_GADGET_FSL_USB2 boolean "Freescale Highspeed USB DR Peripheral Controller" - depends on MPC834x || PPC_MPC831x + depends on FSL_SOC select USB_GADGET_DUALSPEED help Some of Freescale PowerPC processors have a High Speed diff --git a/drivers/usb/gadget/printer.c b/drivers/usb/gadget/printer.c index 4f6bfa100f2a..2c32bd08ee7d 100644 --- a/drivers/usb/gadget/printer.c +++ b/drivers/usb/gadget/printer.c @@ -92,7 +92,6 @@ struct printer_dev { u8 *current_rx_buf; u8 printer_status; u8 reset_printer; - struct class_device *printer_class_dev; struct cdev printer_cdev; struct device *pdev; u8 printer_cdev_open; diff --git a/drivers/usb/gadget/pxa2xx_udc.c b/drivers/usb/gadget/pxa2xx_udc.c index 4402d6f042d9..096c41cc40d1 100644 --- a/drivers/usb/gadget/pxa2xx_udc.c +++ b/drivers/usb/gadget/pxa2xx_udc.c @@ -103,6 +103,12 @@ static const char ep0name [] = "ep0"; #error "Can't configure both IXP and PXA" #endif +/* IXP doesn't yet support <linux/clk.h> */ +#define clk_get(dev,name) NULL +#define clk_enable(clk) do { } while (0) +#define clk_disable(clk) do { } while (0) +#define clk_put(clk) do { } while (0) + #endif #include "pxa2xx_udc.h" @@ -934,20 +940,31 @@ static void udc_disable(struct pxa2xx_udc *); /* We disable the UDC -- and its 48 MHz clock -- whenever it's not * in active use. */ -static int pullup(struct pxa2xx_udc *udc, int is_active) +static int pullup(struct pxa2xx_udc *udc) { - is_active = is_active && udc->vbus && udc->pullup; + int is_active = udc->vbus && udc->pullup && !udc->suspended; DMSG("%s\n", is_active ? "active" : "inactive"); - if (is_active) - udc_enable(udc); - else { - if (udc->gadget.speed != USB_SPEED_UNKNOWN) { - DMSG("disconnect %s\n", udc->driver - ? udc->driver->driver.name - : "(no driver)"); - stop_activity(udc, udc->driver); + if (is_active) { + if (!udc->active) { + udc->active = 1; + /* Enable clock for USB device */ + clk_enable(udc->clk); + udc_enable(udc); } - udc_disable(udc); + } else { + if (udc->active) { + if (udc->gadget.speed != USB_SPEED_UNKNOWN) { + DMSG("disconnect %s\n", udc->driver + ? udc->driver->driver.name + : "(no driver)"); + stop_activity(udc, udc->driver); + } + udc_disable(udc); + /* Disable clock for USB device */ + clk_disable(udc->clk); + udc->active = 0; + } + } return 0; } @@ -958,9 +975,9 @@ static int pxa2xx_udc_vbus_session(struct usb_gadget *_gadget, int is_active) struct pxa2xx_udc *udc; udc = container_of(_gadget, struct pxa2xx_udc, gadget); - udc->vbus = is_active = (is_active != 0); + udc->vbus = (is_active != 0); DMSG("vbus %s\n", is_active ? "supplied" : "inactive"); - pullup(udc, is_active); + pullup(udc); return 0; } @@ -975,9 +992,8 @@ static int pxa2xx_udc_pullup(struct usb_gadget *_gadget, int is_active) if (!udc->mach->gpio_pullup && !udc->mach->udc_command) return -EOPNOTSUPP; - is_active = (is_active != 0); - udc->pullup = is_active; - pullup(udc, is_active); + udc->pullup = (is_active != 0); + pullup(udc); return 0; } @@ -997,7 +1013,7 @@ static const struct usb_gadget_ops pxa2xx_udc_ops = { #ifdef CONFIG_USB_GADGET_DEBUG_FS static int -udc_seq_show(struct seq_file *m, void *d) +udc_seq_show(struct seq_file *m, void *_d) { struct pxa2xx_udc *dev = m->private; unsigned long flags; @@ -1146,11 +1162,6 @@ static void udc_disable(struct pxa2xx_udc *dev) udc_clear_mask_UDCCR(UDCCR_UDE); -#ifdef CONFIG_ARCH_PXA - /* Disable clock for USB device */ - clk_disable(dev->clk); -#endif - ep0_idle (dev); dev->gadget.speed = USB_SPEED_UNKNOWN; } @@ -1191,11 +1202,6 @@ static void udc_enable (struct pxa2xx_udc *dev) { udc_clear_mask_UDCCR(UDCCR_UDE); -#ifdef CONFIG_ARCH_PXA - /* Enable clock for USB device */ - clk_enable(dev->clk); -#endif - /* try to clear these bits before we enable the udc */ udc_ack_int_UDCCR(UDCCR_SUSIR|/*UDCCR_RSTIR|*/UDCCR_RESIR); @@ -1286,7 +1292,7 @@ fail: * for set_configuration as well as eventual disconnect. */ DMSG("registered gadget driver '%s'\n", driver->driver.name); - pullup(dev, 1); + pullup(dev); dump_state(dev); return 0; } @@ -1329,7 +1335,8 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver) return -EINVAL; local_irq_disable(); - pullup(dev, 0); + dev->pullup = 0; + pullup(dev); stop_activity(dev, driver); local_irq_enable(); @@ -2131,13 +2138,11 @@ static int __init pxa2xx_udc_probe(struct platform_device *pdev) if (irq < 0) return -ENODEV; -#ifdef CONFIG_ARCH_PXA dev->clk = clk_get(&pdev->dev, "UDCCLK"); if (IS_ERR(dev->clk)) { retval = PTR_ERR(dev->clk); goto err_clk; } -#endif pr_debug("%s: IRQ %d%s%s\n", driver_name, irq, dev->has_cfr ? "" : " (!cfr)", @@ -2250,10 +2255,8 @@ lubbock_fail0: if (dev->mach->gpio_vbus) gpio_free(dev->mach->gpio_vbus); err_gpio_vbus: -#ifdef CONFIG_ARCH_PXA clk_put(dev->clk); err_clk: -#endif return retval; } @@ -2269,7 +2272,9 @@ static int __exit pxa2xx_udc_remove(struct platform_device *pdev) if (dev->driver) return -EBUSY; - udc_disable(dev); + dev->pullup = 0; + pullup(dev); + remove_debug_files(dev); if (dev->got_irq) { @@ -2289,9 +2294,7 @@ static int __exit pxa2xx_udc_remove(struct platform_device *pdev) if (dev->mach->gpio_pullup) gpio_free(dev->mach->gpio_pullup); -#ifdef CONFIG_ARCH_PXA clk_put(dev->clk); -#endif platform_set_drvdata(pdev, NULL); the_controller = NULL; @@ -2317,10 +2320,15 @@ static int __exit pxa2xx_udc_remove(struct platform_device *pdev) static int pxa2xx_udc_suspend(struct platform_device *dev, pm_message_t state) { struct pxa2xx_udc *udc = platform_get_drvdata(dev); + unsigned long flags; if (!udc->mach->gpio_pullup && !udc->mach->udc_command) WARN("USB host won't detect disconnect!\n"); - pullup(udc, 0); + udc->suspended = 1; + + local_irq_save(flags); + pullup(udc); + local_irq_restore(flags); return 0; } @@ -2328,8 +2336,12 @@ static int pxa2xx_udc_suspend(struct platform_device *dev, pm_message_t state) static int pxa2xx_udc_resume(struct platform_device *dev) { struct pxa2xx_udc *udc = platform_get_drvdata(dev); + unsigned long flags; - pullup(udc, 1); + udc->suspended = 0; + local_irq_save(flags); + pullup(udc); + local_irq_restore(flags); return 0; } diff --git a/drivers/usb/gadget/pxa2xx_udc.h b/drivers/usb/gadget/pxa2xx_udc.h index b67e3ff5e4eb..e2c19e88c875 100644 --- a/drivers/usb/gadget/pxa2xx_udc.h +++ b/drivers/usb/gadget/pxa2xx_udc.h @@ -119,7 +119,9 @@ struct pxa2xx_udc { has_cfr : 1, req_pending : 1, req_std : 1, - req_config : 1; + req_config : 1, + suspended : 1, + active : 1; #define start_watchdog(dev) mod_timer(&dev->timer, jiffies + (HZ/200)) struct timer_list timer; diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index b8ad55aff842..46ee7f4c0912 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -281,23 +281,44 @@ static void ehci_iaa_watchdog(unsigned long param) { struct ehci_hcd *ehci = (struct ehci_hcd *) param; unsigned long flags; - u32 status, cmd; spin_lock_irqsave (&ehci->lock, flags); - WARN_ON(!ehci->reclaim); - status = ehci_readl(ehci, &ehci->regs->status); - cmd = ehci_readl(ehci, &ehci->regs->command); - ehci_dbg(ehci, "IAA watchdog: status %x cmd %x\n", status, cmd); - - /* lost IAA irqs wedge things badly; seen first with a vt8235 */ - if (ehci->reclaim) { - if (status & STS_IAA) { - ehci_vdbg (ehci, "lost IAA\n"); + /* Lost IAA irqs wedge things badly; seen first with a vt8235. + * So we need this watchdog, but must protect it against both + * (a) SMP races against real IAA firing and retriggering, and + * (b) clean HC shutdown, when IAA watchdog was pending. + */ + if (ehci->reclaim + && !timer_pending(&ehci->iaa_watchdog) + && HC_IS_RUNNING(ehci_to_hcd(ehci)->state)) { + u32 cmd, status; + + /* If we get here, IAA is *REALLY* late. It's barely + * conceivable that the system is so busy that CMD_IAAD + * is still legitimately set, so let's be sure it's + * clear before we read STS_IAA. (The HC should clear + * CMD_IAAD when it sets STS_IAA.) + */ + cmd = ehci_readl(ehci, &ehci->regs->command); + if (cmd & CMD_IAAD) + ehci_writel(ehci, cmd & ~CMD_IAAD, + &ehci->regs->command); + + /* If IAA is set here it either legitimately triggered + * before we cleared IAAD above (but _way_ late, so we'll + * still count it as lost) ... or a silicon erratum: + * - VIA seems to set IAA without triggering the IRQ; + * - IAAD potentially cleared without setting IAA. + */ + status = ehci_readl(ehci, &ehci->regs->status); + if ((status & STS_IAA) || !(cmd & CMD_IAAD)) { COUNT (ehci->stats.lost_iaa); ehci_writel(ehci, STS_IAA, &ehci->regs->status); } - ehci_writel(ehci, cmd & ~CMD_IAAD, &ehci->regs->command); + + ehci_vdbg(ehci, "IAA watchdog: status %x cmd %x\n", + status, cmd); end_unlink_async(ehci); } @@ -631,7 +652,7 @@ static int ehci_run (struct usb_hcd *hcd) static irqreturn_t ehci_irq (struct usb_hcd *hcd) { struct ehci_hcd *ehci = hcd_to_ehci (hcd); - u32 status, pcd_status = 0; + u32 status, pcd_status = 0, cmd; int bh; spin_lock (&ehci->lock); @@ -652,7 +673,7 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd) /* clear (just) interrupts */ ehci_writel(ehci, status, &ehci->regs->status); - ehci_readl(ehci, &ehci->regs->command); /* unblock posted write */ + cmd = ehci_readl(ehci, &ehci->regs->command); bh = 0; #ifdef EHCI_VERBOSE_DEBUG @@ -673,8 +694,17 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd) /* complete the unlinking of some qh [4.15.2.3] */ if (status & STS_IAA) { - COUNT (ehci->stats.reclaim); - end_unlink_async(ehci); + /* guard against (alleged) silicon errata */ + if (cmd & CMD_IAAD) { + ehci_writel(ehci, cmd & ~CMD_IAAD, + &ehci->regs->command); + ehci_dbg(ehci, "IAA with IAAD still set?\n"); + } + if (ehci->reclaim) { + COUNT(ehci->stats.reclaim); + end_unlink_async(ehci); + } else + ehci_dbg(ehci, "IAA with nothing to reclaim?\n"); } /* remote wakeup [4.3.1] */ @@ -781,7 +811,7 @@ static int ehci_urb_enqueue ( static void unlink_async (struct ehci_hcd *ehci, struct ehci_qh *qh) { /* failfast */ - if (!HC_IS_RUNNING(ehci_to_hcd(ehci)->state)) + if (!HC_IS_RUNNING(ehci_to_hcd(ehci)->state) && ehci->reclaim) end_unlink_async(ehci); /* if it's not linked then there's nothing to do */ diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c index 776a97f33914..2e49de820b14 100644 --- a/drivers/usb/host/ehci-q.c +++ b/drivers/usb/host/ehci-q.c @@ -319,10 +319,10 @@ qh_completions (struct ehci_hcd *ehci, struct ehci_qh *qh) if (likely (last->urb != urb)) { ehci_urb_done(ehci, last->urb, last_status); count++; + last_status = -EINPROGRESS; } ehci_qtd_free (ehci, last); last = NULL; - last_status = -EINPROGRESS; } /* ignore urbs submitted during completions we reported */ diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c index 0130fd8571e4..d7071c855758 100644 --- a/drivers/usb/host/isp116x-hcd.c +++ b/drivers/usb/host/isp116x-hcd.c @@ -911,8 +911,7 @@ static int isp116x_hub_status_data(struct usb_hcd *hcd, char *buf) buf[0] = 0; for (i = 0; i < ports; i++) { - u32 status = isp116x->rhport[i] = - isp116x_read_reg32(isp116x, i ? HCRHPORT2 : HCRHPORT1); + u32 status = isp116x_read_reg32(isp116x, i ? HCRHPORT2 : HCRHPORT1); if (status & (RH_PS_CSC | RH_PS_PESC | RH_PS_PSSC | RH_PS_OCIC | RH_PS_PRSC)) { @@ -1031,7 +1030,9 @@ static int isp116x_hub_control(struct usb_hcd *hcd, DBG("GetPortStatus\n"); if (!wIndex || wIndex > ports) goto error; - tmp = isp116x->rhport[--wIndex]; + spin_lock_irqsave(&isp116x->lock, flags); + tmp = isp116x_read_reg32(isp116x, (--wIndex) ? HCRHPORT2 : HCRHPORT1); + spin_unlock_irqrestore(&isp116x->lock, flags); *(__le32 *) buf = cpu_to_le32(tmp); DBG("GetPortStatus: port[%d] %08x\n", wIndex + 1, tmp); break; @@ -1080,8 +1081,6 @@ static int isp116x_hub_control(struct usb_hcd *hcd, spin_lock_irqsave(&isp116x->lock, flags); isp116x_write_reg32(isp116x, wIndex ? HCRHPORT2 : HCRHPORT1, tmp); - isp116x->rhport[wIndex] = - isp116x_read_reg32(isp116x, wIndex ? HCRHPORT2 : HCRHPORT1); spin_unlock_irqrestore(&isp116x->lock, flags); break; case SetPortFeature: @@ -1095,24 +1094,22 @@ static int isp116x_hub_control(struct usb_hcd *hcd, spin_lock_irqsave(&isp116x->lock, flags); isp116x_write_reg32(isp116x, wIndex ? HCRHPORT2 : HCRHPORT1, RH_PS_PSS); + spin_unlock_irqrestore(&isp116x->lock, flags); break; case USB_PORT_FEAT_POWER: DBG("USB_PORT_FEAT_POWER\n"); spin_lock_irqsave(&isp116x->lock, flags); isp116x_write_reg32(isp116x, wIndex ? HCRHPORT2 : HCRHPORT1, RH_PS_PPS); + spin_unlock_irqrestore(&isp116x->lock, flags); break; case USB_PORT_FEAT_RESET: DBG("USB_PORT_FEAT_RESET\n"); root_port_reset(isp116x, wIndex); - spin_lock_irqsave(&isp116x->lock, flags); break; default: goto error; } - isp116x->rhport[wIndex] = - isp116x_read_reg32(isp116x, wIndex ? HCRHPORT2 : HCRHPORT1); - spin_unlock_irqrestore(&isp116x->lock, flags); break; default: diff --git a/drivers/usb/host/isp116x.h b/drivers/usb/host/isp116x.h index b91e2edd9c5c..595b90a99848 100644 --- a/drivers/usb/host/isp116x.h +++ b/drivers/usb/host/isp116x.h @@ -270,7 +270,6 @@ struct isp116x { u32 rhdesca; u32 rhdescb; u32 rhstatus; - u32 rhport[2]; /* async schedule: control, bulk */ struct list_head async; diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c index 08c65c1a3771..779d07851a4d 100644 --- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c @@ -94,6 +94,7 @@ static struct usb_device_id id_table_earthmate [] = { static struct usb_device_id id_table_cyphidcomrs232 [] = { { USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) }, + { USB_DEVICE(VENDOR_ID_POWERCOM, PRODUCT_ID_UPS) }, { } /* Terminating entry */ }; @@ -106,6 +107,7 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB) }, { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB_LT20) }, { USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) }, + { USB_DEVICE(VENDOR_ID_POWERCOM, PRODUCT_ID_UPS) }, { USB_DEVICE(VENDOR_ID_DAZZLE, PRODUCT_ID_CA42) }, { } /* Terminating entry */ }; diff --git a/drivers/usb/serial/cypress_m8.h b/drivers/usb/serial/cypress_m8.h index e1c7c27e18b7..0388065bb794 100644 --- a/drivers/usb/serial/cypress_m8.h +++ b/drivers/usb/serial/cypress_m8.h @@ -19,6 +19,10 @@ #define VENDOR_ID_CYPRESS 0x04b4 #define PRODUCT_ID_CYPHIDCOM 0x5500 +/* Powercom UPS, chip CY7C63723 */ +#define VENDOR_ID_POWERCOM 0x0d9f +#define PRODUCT_ID_UPS 0x0002 + /* Nokia CA-42 USB to serial cable */ #define VENDOR_ID_DAZZLE 0x07d0 #define PRODUCT_ID_CA42 0x4101 diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 76db2fef4657..3abb3c863647 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -92,6 +92,7 @@ struct ftdi_sio_quirk { }; static int ftdi_jtag_probe (struct usb_serial *serial); +static int ftdi_mtxorb_hack_setup (struct usb_serial *serial); static void ftdi_USB_UIRT_setup (struct ftdi_private *priv); static void ftdi_HE_TIRA1_setup (struct ftdi_private *priv); @@ -99,6 +100,10 @@ static struct ftdi_sio_quirk ftdi_jtag_quirk = { .probe = ftdi_jtag_probe, }; +static struct ftdi_sio_quirk ftdi_mtxorb_hack_quirk = { + .probe = ftdi_mtxorb_hack_setup, +}; + static struct ftdi_sio_quirk ftdi_USB_UIRT_quirk = { .port_probe = ftdi_USB_UIRT_setup, }; @@ -161,6 +166,8 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_MTXORB_4_PID) }, { USB_DEVICE(FTDI_VID, FTDI_MTXORB_5_PID) }, { USB_DEVICE(FTDI_VID, FTDI_MTXORB_6_PID) }, + { USB_DEVICE(MTXORB_VK_VID, MTXORB_VK_PID), + .driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk }, { USB_DEVICE(FTDI_VID, FTDI_PERLE_ULTRAPORT_PID) }, { USB_DEVICE(FTDI_VID, FTDI_PIEGROUP_PID) }, { USB_DEVICE(FTDI_VID, FTDI_TNC_X_PID) }, @@ -274,6 +281,7 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_ELV_FS20SIG_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ELV_WS300PC_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ELV_FHZ1300PC_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_EM1010PC_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ELV_WS500_PID) }, { USB_DEVICE(FTDI_VID, LINX_SDMUSBQSS_PID) }, { USB_DEVICE(FTDI_VID, LINX_MASTERDEVEL2_PID) }, @@ -351,6 +359,7 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_MAXSTREAM_PID) }, { USB_DEVICE(TML_VID, TML_USB_SERIAL_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ELSTER_UNICOM_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_PROPOX_JTAGCABLEII_PID) }, { USB_DEVICE(OLIMEX_VID, OLIMEX_ARM_USB_OCD_PID), .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, { USB_DEVICE(FIC_VID, FIC_NEO1973_DEBUG_PID), @@ -1088,6 +1097,23 @@ static int ftdi_jtag_probe(struct usb_serial *serial) return 0; } +/* + * The Matrix Orbital VK204-25-USB has an invalid IN endpoint. + * We have to correct it if we want to read from it. + */ +static int ftdi_mtxorb_hack_setup(struct usb_serial *serial) +{ + struct usb_host_endpoint *ep = serial->dev->ep_in[1]; + struct usb_endpoint_descriptor *ep_desc = &ep->desc; + + if (ep->enabled && ep_desc->wMaxPacketSize == 0) { + ep_desc->wMaxPacketSize = 0x40; + info("Fixing invalid wMaxPacketSize on read pipe"); + } + + return 0; +} + /* ftdi_shutdown is called from usbserial:usb_serial_disconnect * it is called when the usb device is disconnected * diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h index 6eee2ab914ec..6da539ede0ee 100644 --- a/drivers/usb/serial/ftdi_sio.h +++ b/drivers/usb/serial/ftdi_sio.h @@ -102,6 +102,13 @@ * (http://www.joernonline.de/dw/doku.php?id=start&idx=projects:oocdlink) */ #define FTDI_OOCDLINK_PID 0xbaf8 /* Amontec JTAGkey */ +/* + * The following are the values for the Matrix Orbital VK204-25-USB + * display, which use the FT232RL. + */ +#define MTXORB_VK_VID 0x1b3d +#define MTXORB_VK_PID 0x0158 + /* Interbiometrics USB I/O Board */ /* Developed for Interbiometrics by Rudolf Gugler */ #define INTERBIOMETRICS_VID 0x1209 @@ -550,6 +557,9 @@ #define TML_VID 0x1B91 /* Vendor ID */ #define TML_USB_SERIAL_PID 0x0064 /* USB - Serial Converter */ +/* Propox devices */ +#define FTDI_PROPOX_JTAGCABLEII_PID 0xD738 + /* Commands */ #define FTDI_SIO_RESET 0 /* Reset the port */ #define FTDI_SIO_MODEM_CTRL 1 /* Set the modem control register */ diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c index 97fa3c428435..7cfce9dabb90 100644 --- a/drivers/usb/serial/generic.c +++ b/drivers/usb/serial/generic.c @@ -323,7 +323,7 @@ static void flush_and_resubmit_read_urb (struct usb_serial_port *port) room = tty_buffer_request_room(tty, urb->actual_length); if (room) { tty_insert_flip_string(tty, urb->transfer_buffer, room); - tty_flip_buffer_push(tty); /* is this allowed from an URB callback ? */ + tty_flip_buffer_push(tty); } } @@ -349,10 +349,12 @@ void usb_serial_generic_read_bulk_callback (struct urb *urb) /* Throttle the device if requested by tty */ spin_lock_irqsave(&port->lock, flags); - if (!(port->throttled = port->throttle_req)) - /* Handle data and continue reading from device */ + if (!(port->throttled = port->throttle_req)) { + spin_unlock_irqrestore(&port->lock, flags); flush_and_resubmit_read_urb(port); - spin_unlock_irqrestore(&port->lock, flags); + } else { + spin_unlock_irqrestore(&port->lock, flags); + } } EXPORT_SYMBOL_GPL(usb_serial_generic_read_bulk_callback); diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index 869ecd374cb4..aeeb9cb20999 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -110,11 +110,20 @@ /* vendor id and device id defines */ +/* The native mos7840/7820 component */ #define USB_VENDOR_ID_MOSCHIP 0x9710 #define MOSCHIP_DEVICE_ID_7840 0x7840 #define MOSCHIP_DEVICE_ID_7820 0x7820 +/* The native component can have its vendor/device id's overridden + * in vendor-specific implementations. Such devices can be handled + * by making a change here, in moschip_port_id_table, and in + * moschip_id_table_combined + */ +#define USB_VENDOR_ID_BANDB 0x0856 +#define BANDB_DEVICE_ID_USOPTL4_4 0xAC44 +#define BANDB_DEVICE_ID_USOPTL4_2 0xAC42 -/* Interrupt Rotinue Defines */ +/* Interrupt Routine Defines */ #define SERIAL_IIR_RLS 0x06 #define SERIAL_IIR_MS 0x00 @@ -159,12 +168,16 @@ static struct usb_device_id moschip_port_id_table[] = { {USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7840)}, {USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7820)}, + {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4)}, + {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_2)}, {} /* terminating entry */ }; static __devinitdata struct usb_device_id moschip_id_table_combined[] = { {USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7840)}, {USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7820)}, + {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4)}, + {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_2)}, {} /* terminating entry */ }; diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index af2674c57414..a396fbbdc9c2 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -111,6 +111,42 @@ static int option_send_setup(struct usb_serial_port *port); #define HUAWEI_PRODUCT_E220BIS 0x1004 #define NOVATELWIRELESS_VENDOR_ID 0x1410 + +/* MERLIN EVDO PRODUCTS */ +#define NOVATELWIRELESS_PRODUCT_V640 0x1100 +#define NOVATELWIRELESS_PRODUCT_V620 0x1110 +#define NOVATELWIRELESS_PRODUCT_V740 0x1120 +#define NOVATELWIRELESS_PRODUCT_V720 0x1130 + +/* MERLIN HSDPA/HSPA PRODUCTS */ +#define NOVATELWIRELESS_PRODUCT_U730 0x1400 +#define NOVATELWIRELESS_PRODUCT_U740 0x1410 +#define NOVATELWIRELESS_PRODUCT_U870 0x1420 +#define NOVATELWIRELESS_PRODUCT_XU870 0x1430 +#define NOVATELWIRELESS_PRODUCT_X950D 0x1450 + +/* EXPEDITE PRODUCTS */ +#define NOVATELWIRELESS_PRODUCT_EV620 0x2100 +#define NOVATELWIRELESS_PRODUCT_ES720 0x2110 +#define NOVATELWIRELESS_PRODUCT_E725 0x2120 +#define NOVATELWIRELESS_PRODUCT_EU730 0x2400 +#define NOVATELWIRELESS_PRODUCT_EU740 0x2410 +#define NOVATELWIRELESS_PRODUCT_EU870D 0x2420 + +/* OVATION PRODUCTS */ +#define NOVATELWIRELESS_PRODUCT_MC727 0x4100 +#define NOVATELWIRELESS_PRODUCT_MC950D 0x4400 + +/* FUTURE NOVATEL PRODUCTS */ +#define NOVATELWIRELESS_PRODUCT_EVDO_1 0x6000 +#define NOVATELWIRELESS_PRODUCT_HSPA_1 0x7000 +#define NOVATELWIRELESS_PRODUCT_EMBEDDED_1 0x8000 +#define NOVATELWIRELESS_PRODUCT_GLOBAL_1 0x9000 +#define NOVATELWIRELESS_PRODUCT_EVDO_2 0x6001 +#define NOVATELWIRELESS_PRODUCT_HSPA_2 0x7001 +#define NOVATELWIRELESS_PRODUCT_EMBEDDED_2 0x8001 +#define NOVATELWIRELESS_PRODUCT_GLOBAL_2 0x9001 + #define DELL_VENDOR_ID 0x413C #define KYOCERA_VENDOR_ID 0x0c88 @@ -120,6 +156,9 @@ static int option_send_setup(struct usb_serial_port *port); #define ANYDATA_PRODUCT_ADU_E100A 0x6501 #define ANYDATA_PRODUCT_ADU_500A 0x6502 +#define AXESSTEL_VENDOR_ID 0x1726 +#define AXESSTEL_PRODUCT_MV110H 0x1000 + #define BANDRICH_VENDOR_ID 0x1A8D #define BANDRICH_PRODUCT_C100_1 0x1002 #define BANDRICH_PRODUCT_C100_2 0x1003 @@ -165,21 +204,34 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220BIS, 0xff, 0xff, 0xff) }, - { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x1100) }, /* Novatel Merlin XS620/S640 */ - { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x1110) }, /* Novatel Merlin S620 */ - { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x1120) }, /* Novatel Merlin EX720 */ - { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x1130) }, /* Novatel Merlin S720 */ - { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x1400) }, /* Novatel U730 */ - { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x1410) }, /* Novatel U740 */ - { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x1420) }, /* Novatel EU870 */ - { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x1430) }, /* Novatel Merlin XU870 HSDPA/3G */ - { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x2100) }, /* Novatel EV620 CDMA/EV-DO */ - { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x2110) }, /* Novatel Merlin ES620 / Merlin ES720 / Ovation U720 */ + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V640) }, /* Novatel Merlin V640/XV620 */ + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V620) }, /* Novatel Merlin V620/S620 */ + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V740) }, /* Novatel Merlin EX720/V740/X720 */ + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V720) }, /* Novatel Merlin V720/S720/PC720 */ + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_U730) }, /* Novatel U730/U740 (VF version) */ + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_U740) }, /* Novatel U740 */ + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_U870) }, /* Novatel U870 */ + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_XU870) }, /* Novatel Merlin XU870 HSDPA/3G */ + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_X950D) }, /* Novatel X950D */ + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EV620) }, /* Novatel EV620/ES620 CDMA/EV-DO */ + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_ES720) }, /* Novatel ES620/ES720/U720/USB720 */ + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_E725) }, /* Novatel E725/E726 */ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x2130) }, /* Novatel Merlin ES620 SM Bus */ - { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x2410) }, /* Novatel EU740 */ - { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x4100) }, /* Novatel U727 */ - { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x4400) }, /* Novatel MC950 */ + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EU730) }, /* Novatel EU730 and Vodafone EU740 */ + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EU740) }, /* Novatel non-Vodafone EU740 */ + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EU870D) }, /* Novatel EU850D/EU860D/EU870D */ + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC950D) }, /* Novatel MC930D/MC950D */ + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC727) }, /* Novatel MC727/U727/USB727 */ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x5010) }, /* Novatel U727 */ + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EVDO_1) }, /* Novatel EVDO product */ + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_1) }, /* Novatel HSPA product */ + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EMBEDDED_1) }, /* Novatel Embedded product */ + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_GLOBAL_1) }, /* Novatel Global product */ + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EVDO_2) }, /* Novatel EVDO product */ + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_2) }, /* Novatel HSPA product */ + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EMBEDDED_2) }, /* Novatel Embedded product */ + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_GLOBAL_2) }, /* Novatel Global product */ + { USB_DEVICE(DELL_VENDOR_ID, 0x8114) }, /* Dell Wireless 5700 Mobile Broadband CDMA/EVDO Mini-Card == Novatel Expedite EV620 CDMA/EV-DO */ { USB_DEVICE(DELL_VENDOR_ID, 0x8115) }, /* Dell Wireless 5500 Mobile Broadband HSDPA Mini-Card == Novatel Expedite EU740 HSDPA/3G */ { USB_DEVICE(DELL_VENDOR_ID, 0x8116) }, /* Dell Wireless 5505 Mobile Broadband HSDPA Mini-Card == Novatel Expedite EU740 HSDPA/3G */ @@ -192,6 +244,7 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE(DELL_VENDOR_ID, 0x8137) }, /* Dell Wireless HSDPA 5520 */ { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_E100A) }, { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_500A) }, + { USB_DEVICE(AXESSTEL_VENDOR_ID, AXESSTEL_PRODUCT_MV110H) }, { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_1) }, { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_2) }, { USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC680) }, diff --git a/drivers/usb/storage/protocol.c b/drivers/usb/storage/protocol.c index 958f5b17847c..b9b8ede61fb3 100644 --- a/drivers/usb/storage/protocol.c +++ b/drivers/usb/storage/protocol.c @@ -170,7 +170,6 @@ unsigned int usb_stor_access_xfer_buf(unsigned char *buffer, if (!sg) sg = scsi_sglist(srb); - buflen = min(buflen, scsi_bufflen(srb)); /* This loop handles a single s-g list entry, which may * include multiple pages. Find the initial page structure @@ -232,6 +231,7 @@ void usb_stor_set_xfer_buf(unsigned char *buffer, unsigned int offset = 0; struct scatterlist *sg = NULL; + buflen = min(buflen, scsi_bufflen(srb)); buflen = usb_stor_access_xfer_buf(buffer, buflen, srb, &sg, &offset, TO_XFER_BUF); if (buflen < scsi_bufflen(srb)) diff --git a/drivers/usb/storage/sddr55.c b/drivers/usb/storage/sddr55.c index d43a3415e12f..6d14327c921d 100644 --- a/drivers/usb/storage/sddr55.c +++ b/drivers/usb/storage/sddr55.c @@ -522,8 +522,8 @@ int sddr55_reset(struct us_data *us) { static unsigned long sddr55_get_capacity(struct us_data *us) { - unsigned char manufacturerID; - unsigned char deviceID; + unsigned char uninitialized_var(manufacturerID); + unsigned char uninitialized_var(deviceID); int result; struct sddr55_card_info *info = (struct sddr55_card_info *)us->extra; diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 758435f8a6f8..e0b0580705e4 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -553,6 +553,19 @@ config FB_BF54X_LQ043 help This is the framebuffer device driver for a SHARP LQ043T1DG01 TFT LCD +config FB_BFIN_T350MCQB + tristate "Varitronix COG-T350MCQB TFT LCD display (BF527 EZKIT)" + depends on FB && BLACKFIN + select BFIN_GPTIMERS + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + help + This is the framebuffer device driver for a Varitronix VL-PS-COG-T350MCQB-01 display TFT LCD + This display is a QVGA 320x240 24-bit RGB display interfaced by an 8-bit wide PPI + It uses PPI[0..7] PPI_FS1, PPI_FS2 and PPI_CLK. + + config FB_STI tristate "HP STI frame buffer device support" depends on FB && PARISC diff --git a/drivers/video/Makefile b/drivers/video/Makefile index 83e02b3429b6..03371c789039 100644 --- a/drivers/video/Makefile +++ b/drivers/video/Makefile @@ -122,6 +122,7 @@ obj-$(CONFIG_FB_EFI) += efifb.o obj-$(CONFIG_FB_VGA16) += vga16fb.o obj-$(CONFIG_FB_OF) += offb.o obj-$(CONFIG_FB_BF54X_LQ043) += bf54x-lq043fb.o +obj-$(CONFIG_FB_BFIN_T350MCQB) += bfin-t350mcqb-fb.o # the test framebuffer is last obj-$(CONFIG_FB_VIRTUAL) += vfb.o diff --git a/drivers/video/bf54x-lq043fb.c b/drivers/video/bf54x-lq043fb.c index 0ce791e6f79c..986a550c0439 100644 --- a/drivers/video/bf54x-lq043fb.c +++ b/drivers/video/bf54x-lq043fb.c @@ -8,7 +8,7 @@ * * * Modified: - * Copyright 2004-2007 Analog Devices Inc. + * Copyright 2007-2008 Analog Devices Inc. * * Bugs: Enter bugs at http://blackfin.uclinux.org/ * @@ -241,7 +241,7 @@ static int request_ports(struct bfin_bf54xfb_info *fbi) u16 eppi_req_18[] = EPPI0_18; u16 disp = fbi->mach_info->disp; - if (gpio_request(disp, NULL)) { + if (gpio_request(disp, DRIVER_NAME)) { printk(KERN_ERR "Requesting GPIO %d faild\n", disp); return -EFAULT; } @@ -672,7 +672,7 @@ static int __init bfin_bf54x_probe(struct platform_device *pdev) &bfin_lq043fb_bl_ops); bl_dev->props.max_brightness = 255; - lcd_dev = lcd_device_register(DRIVER_NAME, NULL, &bfin_lcd_ops); + lcd_dev = lcd_device_register(DRIVER_NAME, &pdev->dev, NULL, &bfin_lcd_ops); lcd_dev->props.max_contrast = 255, printk(KERN_INFO "Done.\n"); #endif diff --git a/drivers/video/bfin-t350mcqb-fb.c b/drivers/video/bfin-t350mcqb-fb.c new file mode 100644 index 000000000000..a2bb2de9e020 --- /dev/null +++ b/drivers/video/bfin-t350mcqb-fb.c @@ -0,0 +1,685 @@ +/* + * File: drivers/video/bfin-t350mcqb-fb.c + * Based on: + * Author: Michael Hennerich <hennerich@blackfin.uclinux.org> + * + * Created: + * Description: Blackfin LCD Framebufer driver + * + * + * Modified: + * Copyright 2004-2007 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/string.h> +#include <linux/fb.h> +#include <linux/init.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/device.h> +#include <linux/backlight.h> +#include <linux/lcd.h> +#include <linux/dma-mapping.h> +#include <linux/platform_device.h> + +#include <asm/blackfin.h> +#include <asm/irq.h> +#include <asm/dma-mapping.h> +#include <asm/dma.h> +#include <asm/portmux.h> +#include <asm/gptimers.h> + +#define NO_BL_SUPPORT + +#define LCD_X_RES 320 /* Horizontal Resolution */ +#define LCD_Y_RES 240 /* Vertical Resolution */ +#define LCD_BPP 24 /* Bit Per Pixel */ + +#define DMA_BUS_SIZE 16 +#define LCD_CLK (12*1000*1000) /* 12MHz */ + +#define CLOCKS_PER_PIX 3 + + /* + * HS and VS timing parameters (all in number of PPI clk ticks) + */ + +#define U_LINE 1 /* Blanking Lines */ + +#define H_ACTPIX (LCD_X_RES * CLOCKS_PER_PIX) /* active horizontal pixel */ +#define H_PERIOD (408 * CLOCKS_PER_PIX) /* HS period */ +#define H_PULSE 90 /* HS pulse width */ +#define H_START 204 /* first valid pixel */ + +#define V_LINES (LCD_Y_RES + U_LINE) /* total vertical lines */ +#define V_PULSE (3 * H_PERIOD) /* VS pulse width (1-5 H_PERIODs) */ +#define V_PERIOD (H_PERIOD * V_LINES) /* VS period */ + +#define ACTIVE_VIDEO_MEM_OFFSET (U_LINE * H_ACTPIX) + +#define BFIN_LCD_NBR_PALETTE_ENTRIES 256 + +#define DRIVER_NAME "bfin-t350mcqb" +static char driver_name[] = DRIVER_NAME; + +struct bfin_t350mcqbfb_info { + struct fb_info *fb; + struct device *dev; + unsigned char *fb_buffer; /* RGB Buffer */ + dma_addr_t dma_handle; + int lq043_mmap; + int lq043_open_cnt; + int irq; + spinlock_t lock; /* lock */ +}; + +static int nocursor; +module_param(nocursor, int, 0644); +MODULE_PARM_DESC(nocursor, "cursor enable/disable"); + +#define PPI_TX_MODE 0x2 +#define PPI_XFER_TYPE_11 0xC +#define PPI_PORT_CFG_01 0x10 +#define PPI_PACK_EN 0x80 +#define PPI_POLS_1 0x8000 + +static void bfin_t350mcqb_config_ppi(struct bfin_t350mcqbfb_info *fbi) +{ + bfin_write_PPI_DELAY(H_START); + bfin_write_PPI_COUNT(H_ACTPIX-1); + bfin_write_PPI_FRAME(V_LINES); + + bfin_write_PPI_CONTROL(PPI_TX_MODE | /* output mode , PORT_DIR */ + PPI_XFER_TYPE_11 | /* sync mode XFR_TYPE */ + PPI_PORT_CFG_01 | /* two frame sync PORT_CFG */ + PPI_PACK_EN | /* packing enabled PACK_EN */ + PPI_POLS_1); /* faling edge syncs POLS */ +} + +static inline void bfin_t350mcqb_disable_ppi(void) +{ + bfin_write_PPI_CONTROL(bfin_read_PPI_CONTROL() & ~PORT_EN); +} + +static inline void bfin_t350mcqb_enable_ppi(void) +{ + bfin_write_PPI_CONTROL(bfin_read_PPI_CONTROL() | PORT_EN); +} + +static void bfin_t350mcqb_start_timers(void) +{ + unsigned long flags; + + local_irq_save(flags); + enable_gptimers(TIMER1bit); + enable_gptimers(TIMER0bit); + local_irq_restore(flags); +} + +static void bfin_t350mcqb_stop_timers(void) +{ + disable_gptimers(TIMER0bit | TIMER1bit); + + set_gptimer_status(0, TIMER_STATUS_TRUN0 | TIMER_STATUS_TRUN1 | + TIMER_STATUS_TIMIL0 | TIMER_STATUS_TIMIL1 | + TIMER_STATUS_TOVF0 | TIMER_STATUS_TOVF1); + +} + +static void bfin_t350mcqb_init_timers(void) +{ + + bfin_t350mcqb_stop_timers(); + + set_gptimer_period(TIMER0_id, H_PERIOD); + set_gptimer_pwidth(TIMER0_id, H_PULSE); + set_gptimer_config(TIMER0_id, TIMER_MODE_PWM | TIMER_PERIOD_CNT | + TIMER_TIN_SEL | TIMER_CLK_SEL| + TIMER_EMU_RUN); + + set_gptimer_period(TIMER1_id, V_PERIOD); + set_gptimer_pwidth(TIMER1_id, V_PULSE); + set_gptimer_config(TIMER1_id, TIMER_MODE_PWM | TIMER_PERIOD_CNT | + TIMER_TIN_SEL | TIMER_CLK_SEL | + TIMER_EMU_RUN); + +} + +static void bfin_t350mcqb_config_dma(struct bfin_t350mcqbfb_info *fbi) +{ + + set_dma_config(CH_PPI, + set_bfin_dma_config(DIR_READ, DMA_FLOW_AUTO, + INTR_DISABLE, DIMENSION_2D, + DATA_SIZE_16, + DMA_NOSYNC_KEEP_DMA_BUF)); + set_dma_x_count(CH_PPI, (LCD_X_RES * LCD_BPP) / DMA_BUS_SIZE); + set_dma_x_modify(CH_PPI, DMA_BUS_SIZE / 8); + set_dma_y_count(CH_PPI, V_LINES); + + set_dma_y_modify(CH_PPI, DMA_BUS_SIZE / 8); + set_dma_start_addr(CH_PPI, (unsigned long)fbi->fb_buffer); + +} + +static int bfin_t350mcqb_request_ports(int action) +{ + u16 ppi0_req_8[] = {P_PPI0_CLK, P_PPI0_FS1, P_PPI0_FS2, + P_PPI0_D0, P_PPI0_D1, P_PPI0_D2, + P_PPI0_D3, P_PPI0_D4, P_PPI0_D5, + P_PPI0_D6, P_PPI0_D7, 0}; + + if (action) { + if (peripheral_request_list(ppi0_req_8, DRIVER_NAME)) { + printk(KERN_ERR "Requesting Peripherals faild\n"); + return -EFAULT; + } + } else + peripheral_free_list(ppi0_req_8); + + return 0; +} + +static int bfin_t350mcqb_fb_open(struct fb_info *info, int user) +{ + struct bfin_t350mcqbfb_info *fbi = info->par; + + spin_lock(&fbi->lock); + fbi->lq043_open_cnt++; + + if (fbi->lq043_open_cnt <= 1) { + + bfin_t350mcqb_disable_ppi(); + SSYNC(); + + bfin_t350mcqb_config_dma(fbi); + bfin_t350mcqb_config_ppi(fbi); + bfin_t350mcqb_init_timers(); + + /* start dma */ + enable_dma(CH_PPI); + bfin_t350mcqb_enable_ppi(); + bfin_t350mcqb_start_timers(); + } + + spin_unlock(&fbi->lock); + + return 0; +} + +static int bfin_t350mcqb_fb_release(struct fb_info *info, int user) +{ + struct bfin_t350mcqbfb_info *fbi = info->par; + + spin_lock(&fbi->lock); + + fbi->lq043_open_cnt--; + fbi->lq043_mmap = 0; + + if (fbi->lq043_open_cnt <= 0) { + bfin_t350mcqb_disable_ppi(); + SSYNC(); + disable_dma(CH_PPI); + bfin_t350mcqb_stop_timers(); + memset(fbi->fb_buffer, 0, info->fix.smem_len); + } + + spin_unlock(&fbi->lock); + + return 0; +} + +static int bfin_t350mcqb_fb_check_var(struct fb_var_screeninfo *var, + struct fb_info *info) +{ + + if (var->bits_per_pixel != LCD_BPP) { + pr_debug("%s: depth not supported: %u BPP\n", __FUNCTION__, + var->bits_per_pixel); + return -EINVAL; + } + + if (info->var.xres != var->xres || info->var.yres != var->yres || + info->var.xres_virtual != var->xres_virtual || + info->var.yres_virtual != var->yres_virtual) { + pr_debug("%s: Resolution not supported: X%u x Y%u \n", + __FUNCTION__, var->xres, var->yres); + return -EINVAL; + } + + /* + * Memory limit + */ + + if ((info->fix.line_length * var->yres_virtual) > info->fix.smem_len) { + pr_debug("%s: Memory Limit requested yres_virtual = %u\n", + __FUNCTION__, var->yres_virtual); + return -ENOMEM; + } + + return 0; +} + +static int bfin_t350mcqb_fb_mmap(struct fb_info *info, struct vm_area_struct *vma) +{ + struct bfin_t350mcqbfb_info *fbi = info->par; + + if (fbi->lq043_mmap) + return -1; + + spin_lock(&fbi->lock); + fbi->lq043_mmap = 1; + spin_unlock(&fbi->lock); + + vma->vm_start = (unsigned long)(fbi->fb_buffer + ACTIVE_VIDEO_MEM_OFFSET); + + vma->vm_end = vma->vm_start + info->fix.smem_len; + /* For those who don't understand how mmap works, go read + * Documentation/nommu-mmap.txt. + * For those that do, you will know that the VM_MAYSHARE flag + * must be set in the vma->vm_flags structure on noMMU + * Other flags can be set, and are documented in + * include/linux/mm.h + */ + vma->vm_flags |= VM_MAYSHARE; + + return 0; +} + +int bfin_t350mcqb_fb_cursor(struct fb_info *info, struct fb_cursor *cursor) +{ + if (nocursor) + return 0; + else + return -EINVAL; /* just to force soft_cursor() call */ +} + +static int bfin_t350mcqb_fb_setcolreg(u_int regno, u_int red, u_int green, + u_int blue, u_int transp, + struct fb_info *info) +{ + if (regno >= BFIN_LCD_NBR_PALETTE_ENTRIES) + return -EINVAL; + + if (info->var.grayscale) { + /* grayscale = 0.30*R + 0.59*G + 0.11*B */ + red = green = blue = (red * 77 + green * 151 + blue * 28) >> 8; + } + + if (info->fix.visual == FB_VISUAL_TRUECOLOR) { + + u32 value; + /* Place color in the pseudopalette */ + if (regno > 16) + return -EINVAL; + + red >>= (16 - info->var.red.length); + green >>= (16 - info->var.green.length); + blue >>= (16 - info->var.blue.length); + + value = (red << info->var.red.offset) | + (green << info->var.green.offset) | + (blue << info->var.blue.offset); + value &= 0xFFFFFF; + + ((u32 *) (info->pseudo_palette))[regno] = value; + + } + + return 0; +} + +static struct fb_ops bfin_t350mcqb_fb_ops = { + .owner = THIS_MODULE, + .fb_open = bfin_t350mcqb_fb_open, + .fb_release = bfin_t350mcqb_fb_release, + .fb_check_var = bfin_t350mcqb_fb_check_var, + .fb_fillrect = cfb_fillrect, + .fb_copyarea = cfb_copyarea, + .fb_imageblit = cfb_imageblit, + .fb_mmap = bfin_t350mcqb_fb_mmap, + .fb_cursor = bfin_t350mcqb_fb_cursor, + .fb_setcolreg = bfin_t350mcqb_fb_setcolreg, +}; + +#ifndef NO_BL_SUPPORT +static int bl_get_brightness(struct backlight_device *bd) +{ + return 0; +} + +static struct backlight_ops bfin_lq043fb_bl_ops = { + .get_brightness = bl_get_brightness, +}; + +static struct backlight_device *bl_dev; + +static int bfin_lcd_get_power(struct lcd_device *dev) +{ + return 0; +} + +static int bfin_lcd_set_power(struct lcd_device *dev, int power) +{ + return 0; +} + +static int bfin_lcd_get_contrast(struct lcd_device *dev) +{ + return 0; +} + +static int bfin_lcd_set_contrast(struct lcd_device *dev, int contrast) +{ + + return 0; +} + +static int bfin_lcd_check_fb(struct fb_info *fi) +{ + if (!fi || (fi == &bfin_t350mcqb_fb)) + return 1; + return 0; +} + +static struct lcd_ops bfin_lcd_ops = { + .get_power = bfin_lcd_get_power, + .set_power = bfin_lcd_set_power, + .get_contrast = bfin_lcd_get_contrast, + .set_contrast = bfin_lcd_set_contrast, + .check_fb = bfin_lcd_check_fb, +}; + +static struct lcd_device *lcd_dev; +#endif + +static irqreturn_t bfin_t350mcqb_irq_error(int irq, void *dev_id) +{ + /*struct bfin_t350mcqbfb_info *info = (struct bfin_t350mcqbfb_info *)dev_id;*/ + + u16 status = bfin_read_PPI_STATUS(); + bfin_write_PPI_STATUS(0xFFFF); + + if (status) { + bfin_t350mcqb_disable_ppi(); + disable_dma(CH_PPI); + + /* start dma */ + enable_dma(CH_PPI); + bfin_t350mcqb_enable_ppi(); + bfin_write_PPI_STATUS(0xFFFF); + } + + return IRQ_HANDLED; +} + +static int __init bfin_t350mcqb_probe(struct platform_device *pdev) +{ + struct bfin_t350mcqbfb_info *info; + struct fb_info *fbinfo; + int ret; + + printk(KERN_INFO DRIVER_NAME ": %dx%d %d-bit RGB FrameBuffer initializing...\n", + LCD_X_RES, LCD_Y_RES, LCD_BPP); + + if (request_dma(CH_PPI, "CH_PPI") < 0) { + printk(KERN_ERR DRIVER_NAME + ": couldn't request CH_PPI DMA\n"); + ret = -EFAULT; + goto out1; + } + + fbinfo = + framebuffer_alloc(sizeof(struct bfin_t350mcqbfb_info), &pdev->dev); + if (!fbinfo) { + ret = -ENOMEM; + goto out2; + } + + info = fbinfo->par; + info->fb = fbinfo; + info->dev = &pdev->dev; + + platform_set_drvdata(pdev, fbinfo); + + strcpy(fbinfo->fix.id, driver_name); + + fbinfo->fix.type = FB_TYPE_PACKED_PIXELS; + fbinfo->fix.type_aux = 0; + fbinfo->fix.xpanstep = 0; + fbinfo->fix.ypanstep = 0; + fbinfo->fix.ywrapstep = 0; + fbinfo->fix.accel = FB_ACCEL_NONE; + fbinfo->fix.visual = FB_VISUAL_TRUECOLOR; + + fbinfo->var.nonstd = 0; + fbinfo->var.activate = FB_ACTIVATE_NOW; + fbinfo->var.height = -1; + fbinfo->var.width = -1; + fbinfo->var.accel_flags = 0; + fbinfo->var.vmode = FB_VMODE_NONINTERLACED; + + fbinfo->var.xres = LCD_X_RES; + fbinfo->var.xres_virtual = LCD_X_RES; + fbinfo->var.yres = LCD_Y_RES; + fbinfo->var.yres_virtual = LCD_Y_RES; + fbinfo->var.bits_per_pixel = LCD_BPP; + + fbinfo->var.red.offset = 0; + fbinfo->var.green.offset = 8; + fbinfo->var.blue.offset = 16; + fbinfo->var.transp.offset = 0; + fbinfo->var.red.length = 8; + fbinfo->var.green.length = 8; + fbinfo->var.blue.length = 8; + fbinfo->var.transp.length = 0; + fbinfo->fix.smem_len = LCD_X_RES * LCD_Y_RES * LCD_BPP / 8; + + fbinfo->fix.line_length = fbinfo->var.xres_virtual * + fbinfo->var.bits_per_pixel / 8; + + + fbinfo->fbops = &bfin_t350mcqb_fb_ops; + fbinfo->flags = FBINFO_FLAG_DEFAULT; + + info->fb_buffer = + dma_alloc_coherent(NULL, fbinfo->fix.smem_len, &info->dma_handle, + GFP_KERNEL); + + if (NULL == info->fb_buffer) { + printk(KERN_ERR DRIVER_NAME + ": couldn't allocate dma buffer.\n"); + ret = -ENOMEM; + goto out3; + } + + memset(info->fb_buffer, 0, fbinfo->fix.smem_len); + + fbinfo->screen_base = (void *)info->fb_buffer + ACTIVE_VIDEO_MEM_OFFSET; + fbinfo->fix.smem_start = (int)info->fb_buffer + ACTIVE_VIDEO_MEM_OFFSET; + + fbinfo->fbops = &bfin_t350mcqb_fb_ops; + + fbinfo->pseudo_palette = kmalloc(sizeof(u32) * 16, GFP_KERNEL); + if (!fbinfo->pseudo_palette) { + printk(KERN_ERR DRIVER_NAME + "Fail to allocate pseudo_palette\n"); + + ret = -ENOMEM; + goto out4; + } + + memset(fbinfo->pseudo_palette, 0, sizeof(u32) * 16); + + if (fb_alloc_cmap(&fbinfo->cmap, BFIN_LCD_NBR_PALETTE_ENTRIES, 0) + < 0) { + printk(KERN_ERR DRIVER_NAME + "Fail to allocate colormap (%d entries)\n", + BFIN_LCD_NBR_PALETTE_ENTRIES); + ret = -EFAULT; + goto out5; + } + + if (bfin_t350mcqb_request_ports(1)) { + printk(KERN_ERR DRIVER_NAME ": couldn't request gpio port.\n"); + ret = -EFAULT; + goto out6; + } + + info->irq = platform_get_irq(pdev, 0); + if (info->irq < 0) { + ret = -EINVAL; + goto out7; + } + + if (request_irq(info->irq, (void *)bfin_t350mcqb_irq_error, IRQF_DISABLED, + "PPI ERROR", info) < 0) { + printk(KERN_ERR DRIVER_NAME + ": unable to request PPI ERROR IRQ\n"); + ret = -EFAULT; + goto out7; + } + + if (register_framebuffer(fbinfo) < 0) { + printk(KERN_ERR DRIVER_NAME + ": unable to register framebuffer.\n"); + ret = -EINVAL; + goto out8; + } +#ifndef NO_BL_SUPPORT + bl_dev = + backlight_device_register("bf52x-bl", NULL, NULL, + &bfin_lq043fb_bl_ops); + bl_dev->props.max_brightness = 255; + + lcd_dev = lcd_device_register(DRIVER_NAME, NULL, &bfin_lcd_ops); + lcd_dev->props.max_contrast = 255, printk(KERN_INFO "Done.\n"); +#endif + + return 0; + +out8: + free_irq(info->irq, info); +out7: + bfin_t350mcqb_request_ports(0); +out6: + fb_dealloc_cmap(&fbinfo->cmap); +out5: + kfree(fbinfo->pseudo_palette); +out4: + dma_free_coherent(NULL, fbinfo->fix.smem_len, info->fb_buffer, + info->dma_handle); +out3: + framebuffer_release(fbinfo); +out2: + free_dma(CH_PPI); +out1: + platform_set_drvdata(pdev, NULL); + + return ret; +} + +static int bfin_t350mcqb_remove(struct platform_device *pdev) +{ + + struct fb_info *fbinfo = platform_get_drvdata(pdev); + struct bfin_t350mcqbfb_info *info = fbinfo->par; + + free_dma(CH_PPI); + free_irq(info->irq, info); + + if (info->fb_buffer != NULL) + dma_free_coherent(NULL, fbinfo->fix.smem_len, info->fb_buffer, + info->dma_handle); + + kfree(fbinfo->pseudo_palette); + fb_dealloc_cmap(&fbinfo->cmap); + +#ifndef NO_BL_SUPPORT + lcd_device_unregister(lcd_dev); + backlight_device_unregister(bl_dev); +#endif + + unregister_framebuffer(fbinfo); + + bfin_t350mcqb_request_ports(0); + + printk(KERN_INFO DRIVER_NAME ": Unregister LCD driver.\n"); + + return 0; +} + +#ifdef CONFIG_PM +static int bfin_t350mcqb_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct fb_info *fbinfo = platform_get_drvdata(pdev); + struct bfin_t350mcqbfb_info *info = fbinfo->par; + + bfin_t350mcqb_disable_ppi(); + disable_dma(CH_PPI); + bfin_write_PPI_STATUS(0xFFFF); + + return 0; +} + +static int bfin_t350mcqb_resume(struct platform_device *pdev) +{ + struct fb_info *fbinfo = platform_get_drvdata(pdev); + struct bfin_t350mcqbfb_info *info = fbinfo->par; + + enable_dma(CH_PPI); + bfin_t350mcqb_enable_ppi(); + + return 0; +} +#else +#define bfin_t350mcqb_suspend NULL +#define bfin_t350mcqb_resume NULL +#endif + +static struct platform_driver bfin_t350mcqb_driver = { + .probe = bfin_t350mcqb_probe, + .remove = bfin_t350mcqb_remove, + .suspend = bfin_t350mcqb_suspend, + .resume = bfin_t350mcqb_resume, + .driver = { + .name = DRIVER_NAME, + .owner = THIS_MODULE, + }, +}; + +static int __devinit bfin_t350mcqb_driver_init(void) +{ + return platform_driver_register(&bfin_t350mcqb_driver); +} + +static void __exit bfin_t350mcqb_driver_cleanup(void) +{ + platform_driver_unregister(&bfin_t350mcqb_driver); +} + +MODULE_DESCRIPTION("Blackfin TFT LCD Driver"); +MODULE_LICENSE("GPL"); + +module_init(bfin_t350mcqb_driver_init); +module_exit(bfin_t350mcqb_driver_cleanup); diff --git a/drivers/video/hitfb.c b/drivers/video/hitfb.c index 756c0ce85911..392a8be6aa76 100644 --- a/drivers/video/hitfb.c +++ b/drivers/video/hitfb.c @@ -403,7 +403,7 @@ static int __init hitfb_probe(struct platform_device *dev) return 0; } -static int __devexit hitfb_remove(struct platform_device *dev) +static int __exit hitfb_remove(struct platform_device *dev) { return unregister_framebuffer(&fb_info); } @@ -439,7 +439,7 @@ static int hitfb_resume(struct platform_device *dev) static struct platform_driver hitfb_driver = { .probe = hitfb_probe, - .remove = __devexit_p(hitfb_remove), + .remove = __exit_p(hitfb_remove), #ifdef CONFIG_PM .suspend = hitfb_suspend, .resume = hitfb_resume, diff --git a/drivers/video/mbx/mbxfb.c b/drivers/video/mbx/mbxfb.c index 80cd117ca65c..01f77bcc68f9 100644 --- a/drivers/video/mbx/mbxfb.c +++ b/drivers/video/mbx/mbxfb.c @@ -889,7 +889,7 @@ static int __devinit mbxfb_probe(struct platform_device *dev) struct mbxfb_info *mfbi; struct mbxfb_platform_data *pdata; - dev_dbg(dev, "mbxfb_probe\n"); + dev_dbg(&dev->dev, "mbxfb_probe\n"); pdata = dev->dev.platform_data; if (!pdata) { diff --git a/drivers/video/pvr2fb.c b/drivers/video/pvr2fb.c index 6a3d0b574897..8c863a7f654b 100644 --- a/drivers/video/pvr2fb.c +++ b/drivers/video/pvr2fb.c @@ -1,16 +1,12 @@ -/* drivers/video/pvr2fb.c +/* + * drivers/video/pvr2fb.c * * Frame buffer and fbcon support for the NEC PowerVR2 found within the Sega * Dreamcast. * * Copyright (c) 2001 M. R. Brown <mrbrown@0xd6.org> - * Copyright (c) 2001, 2002, 2003, 2004, 2005 Paul Mundt <lethal@linux-sh.org> - * - * This file is part of the LinuxDC project (linuxdc.sourceforge.net). + * Copyright (c) 2001 - 2008 Paul Mundt <lethal@linux-sh.org> * - */ - -/* * This driver is mostly based on the excellent amifb and vfb sources. It uses * an odd scheme for converting hardware values to/from framebuffer values, * here are some hacked-up formulas: @@ -490,7 +486,7 @@ static int pvr2fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) } else { var->sync &= ~FB_SYNC_BROADCAST; var->vmode &= ~FB_VMODE_INTERLACED; - var->vmode |= pvr2_var.vmode; + var->vmode |= FB_VMODE_NONINTERLACED; } if ((var->activate & FB_ACTIVATE_MASK) != FB_ACTIVATE_TEST) { diff --git a/drivers/video/sm501fb.c b/drivers/video/sm501fb.c index e83dfba7e636..742b5c656d66 100644 --- a/drivers/video/sm501fb.c +++ b/drivers/video/sm501fb.c @@ -237,12 +237,14 @@ static int sm501fb_check_var(struct fb_var_screeninfo *var, /* check we can fit these values into the registers */ - if (var->hsync_len > 255 || var->vsync_len > 255) + if (var->hsync_len > 255 || var->vsync_len > 63) return -EINVAL; - if ((var->xres + var->right_margin) >= 4096) + /* hdisplay end and hsync start */ + if ((var->xres + var->right_margin) > 4096) return -EINVAL; + /* vdisplay end and vsync start */ if ((var->yres + var->lower_margin) > 2048) return -EINVAL; @@ -281,19 +283,21 @@ static int sm501fb_check_var(struct fb_var_screeninfo *var, var->blue.length = var->bits_per_pixel; var->blue.offset = 0; var->transp.length = 0; + var->transp.offset = 0; break; case 16: if (sm->pdata->flags & SM501_FBPD_SWAP_FB_ENDIAN) { - var->red.offset = 11; - var->green.offset = 5; - var->blue.offset = 0; - } else { var->blue.offset = 11; var->green.offset = 5; var->red.offset = 0; + } else { + var->red.offset = 11; + var->green.offset = 5; + var->blue.offset = 0; } + var->transp.offset = 0; var->red.length = 5; var->green.length = 6; @@ -397,7 +401,7 @@ static int sm501fb_set_par_common(struct fb_info *info, break; case 16: - info->fix.visual = FB_VISUAL_DIRECTCOLOR; + info->fix.visual = FB_VISUAL_TRUECOLOR; break; case 32: @@ -613,6 +617,7 @@ static int sm501fb_set_par_crt(struct fb_info *info) case 16: control |= SM501_DC_CRT_CONTROL_16BPP; + sm501fb_setup_gamma(fbi, SM501_DC_CRT_PALETTE); break; case 32: @@ -750,6 +755,7 @@ static int sm501fb_set_par_pnl(struct fb_info *info) case 16: control |= SM501_DC_PANEL_CONTROL_16BPP; + sm501fb_setup_gamma(fbi, SM501_DC_PANEL_PALETTE); break; case 32: diff --git a/drivers/video/stifb.c b/drivers/video/stifb.c index e7c8db2eb49b..f98be301140c 100644 --- a/drivers/video/stifb.c +++ b/drivers/video/stifb.c @@ -505,16 +505,24 @@ ngleSetupAttrPlanes(struct stifb_info *fb, int BufferNumber) static void rattlerSetupPlanes(struct stifb_info *fb) { + int saved_id, y; + + /* Write RAMDAC pixel read mask register so all overlay + * planes are display-enabled. (CRX24 uses Bt462 pixel + * read mask register for overlay planes, not image planes). + */ CRX24_SETUP_RAMDAC(fb); - /* replacement for: SETUP_FB(fb, CRX24_OVERLAY_PLANES); */ - WRITE_WORD(0x83000300, fb, REG_14); - SETUP_HW(fb); - WRITE_BYTE(1, fb, REG_16b1); + /* change fb->id temporarily to fool SETUP_FB() */ + saved_id = fb->id; + fb->id = CRX24_OVERLAY_PLANES; + SETUP_FB(fb); + fb->id = saved_id; + + for (y = 0; y < fb->info.var.yres; ++y) + memset(fb->info.screen_base + y * fb->info.fix.line_length, + 0xff, fb->info.var.xres * fb->info.var.bits_per_pixel/8); - fb_memset((void*)fb->info.fix.smem_start, 0xff, - fb->info.var.yres*fb->info.fix.line_length); - CRX24_SET_OVLY_MASK(fb); SETUP_FB(fb); } diff --git a/drivers/video/tridentfb.c b/drivers/video/tridentfb.c index 70fb4ee2b421..0a4e07d43d2d 100644 --- a/drivers/video/tridentfb.c +++ b/drivers/video/tridentfb.c @@ -564,7 +564,7 @@ static inline void write3CE(int reg, unsigned char val) t_outb(val, 0x3CF); } -static inline void enable_mmio(void) +static void enable_mmio(void) { /* Goto New Mode */ outb(0x0B, 0x3C4); @@ -579,6 +579,21 @@ static inline void enable_mmio(void) outb(inb(0x3D5) | 0x01, 0x3D5); } +static void disable_mmio(void) +{ + /* Goto New Mode */ + t_outb(0x0B, 0x3C4); + t_inb(0x3C5); + + /* Unprotect registers */ + t_outb(NewMode1, 0x3C4); + t_outb(0x80, 0x3C5); + + /* Disable MMIO */ + t_outb(PCIReg, 0x3D4); + t_outb(t_inb(0x3D5) & ~0x01, 0x3D5); +} + #define crtc_unlock() write3X4(CRTVSyncEnd, read3X4(CRTVSyncEnd) & 0x7F) /* Return flat panel's maximum x resolution */ @@ -730,7 +745,7 @@ static unsigned int __devinit get_memsize(void) switch (tmp) { case 0x01: - k = 512; + k = 512 * Kb; break; case 0x02: k = 6 * Mb; /* XP */ @@ -1239,9 +1254,9 @@ static int __devinit trident_pci_probe(struct pci_dev * dev, default_par.io_virt = ioremap_nocache(tridentfb_fix.mmio_start, tridentfb_fix.mmio_len); if (!default_par.io_virt) { - release_region(tridentfb_fix.mmio_start, tridentfb_fix.mmio_len); debug("ioremap failed\n"); - return -1; + err = -1; + goto out_unmap1; } enable_mmio(); @@ -1252,25 +1267,21 @@ static int __devinit trident_pci_probe(struct pci_dev * dev, if (!request_mem_region(tridentfb_fix.smem_start, tridentfb_fix.smem_len, "tridentfb")) { debug("request_mem_region failed!\n"); + disable_mmio(); err = -1; - goto out_unmap; + goto out_unmap1; } fb_info.screen_base = ioremap_nocache(tridentfb_fix.smem_start, tridentfb_fix.smem_len); if (!fb_info.screen_base) { - release_mem_region(tridentfb_fix.smem_start, tridentfb_fix.smem_len); debug("ioremap failed\n"); err = -1; - goto out_unmap; + goto out_unmap2; } output("%s board found\n", pci_name(dev)); -#if 0 - output("Trident board found : mem = %X, io = %X, mem_v = %X, io_v = %X\n", - tridentfb_fix.smem_start, tridentfb_fix.mmio_start, fb_info.screen_base, default_par.io_virt); -#endif displaytype = get_displaytype(); if (flatpanel) @@ -1288,9 +1299,12 @@ static int __devinit trident_pci_probe(struct pci_dev * dev, if (!fb_find_mode(&default_var, &fb_info, mode, NULL, 0, NULL, bpp)) { err = -EINVAL; - goto out_unmap; + goto out_unmap2; } - fb_alloc_cmap(&fb_info.cmap, 256, 0); + err = fb_alloc_cmap(&fb_info.cmap, 256, 0); + if (err < 0) + goto out_unmap2; + if (defaultaccel && acc) default_var.accel_flags |= FB_ACCELF_TEXT; else @@ -1300,19 +1314,24 @@ static int __devinit trident_pci_probe(struct pci_dev * dev, fb_info.device = &dev->dev; if (register_framebuffer(&fb_info) < 0) { printk(KERN_ERR "tridentfb: could not register Trident framebuffer\n"); + fb_dealloc_cmap(&fb_info.cmap); err = -EINVAL; - goto out_unmap; + goto out_unmap2; } output("fb%d: %s frame buffer device %dx%d-%dbpp\n", fb_info.node, fb_info.fix.id, default_var.xres, default_var.yres, default_var.bits_per_pixel); return 0; -out_unmap: - if (default_par.io_virt) - iounmap(default_par.io_virt); +out_unmap2: if (fb_info.screen_base) iounmap(fb_info.screen_base); + release_mem_region(tridentfb_fix.smem_start, tridentfb_fix.smem_len); + disable_mmio(); +out_unmap1: + if (default_par.io_virt) + iounmap(default_par.io_virt); + release_mem_region(tridentfb_fix.mmio_start, tridentfb_fix.mmio_len); return err; } @@ -1323,7 +1342,7 @@ static void __devexit trident_pci_remove(struct pci_dev *dev) iounmap(par->io_virt); iounmap(fb_info.screen_base); release_mem_region(tridentfb_fix.smem_start, tridentfb_fix.smem_len); - release_region(tridentfb_fix.mmio_start, tridentfb_fix.mmio_len); + release_mem_region(tridentfb_fix.mmio_start, tridentfb_fix.mmio_len); } /* List of boards that we are trying to support */ diff --git a/drivers/w1/masters/ds1wm.c b/drivers/w1/masters/ds1wm.c index 688e435b4d9a..10211e493001 100644 --- a/drivers/w1/masters/ds1wm.c +++ b/drivers/w1/masters/ds1wm.c @@ -17,6 +17,7 @@ #include <linux/pm.h> #include <linux/platform_device.h> #include <linux/clk.h> +#include <linux/err.h> #include <linux/delay.h> #include <linux/ds1wm.h> @@ -102,12 +103,12 @@ struct ds1wm_data { static inline void ds1wm_write_register(struct ds1wm_data *ds1wm_data, u32 reg, u8 val) { - __raw_writeb(val, ds1wm_data->map + (reg << ds1wm_data->bus_shift)); + __raw_writeb(val, ds1wm_data->map + (reg << ds1wm_data->bus_shift)); } static inline u8 ds1wm_read_register(struct ds1wm_data *ds1wm_data, u32 reg) { - return __raw_readb(ds1wm_data->map + (reg << ds1wm_data->bus_shift)); + return __raw_readb(ds1wm_data->map + (reg << ds1wm_data->bus_shift)); } @@ -149,8 +150,8 @@ static int ds1wm_reset(struct ds1wm_data *ds1wm_data) timeleft = wait_for_completion_timeout(&reset_done, DS1WM_TIMEOUT); ds1wm_data->reset_complete = NULL; if (!timeleft) { - dev_dbg(&ds1wm_data->pdev->dev, "reset failed\n"); - return 1; + dev_err(&ds1wm_data->pdev->dev, "reset failed\n"); + return 1; } /* Wait for the end of the reset. According to the specs, the time @@ -167,11 +168,11 @@ static int ds1wm_reset(struct ds1wm_data *ds1wm_data) (ds1wm_data->active_high ? DS1WM_INTEN_IAS : 0)); if (!ds1wm_data->slave_present) { - dev_dbg(&ds1wm_data->pdev->dev, "reset: no devices found\n"); - return 1; - } + dev_dbg(&ds1wm_data->pdev->dev, "reset: no devices found\n"); + return 1; + } - return 0; + return 0; } static int ds1wm_write(struct ds1wm_data *ds1wm_data, u8 data) @@ -334,7 +335,7 @@ static int ds1wm_probe(struct platform_device *pdev) if (!pdev) return -ENODEV; - ds1wm_data = kzalloc(sizeof (*ds1wm_data), GFP_KERNEL); + ds1wm_data = kzalloc(sizeof(*ds1wm_data), GFP_KERNEL); if (!ds1wm_data) return -ENOMEM; @@ -374,8 +375,8 @@ static int ds1wm_probe(struct platform_device *pdev) goto err1; ds1wm_data->clk = clk_get(&pdev->dev, "ds1wm"); - if (!ds1wm_data->clk) { - ret = -ENOENT; + if (IS_ERR(ds1wm_data->clk)) { + ret = PTR_ERR(ds1wm_data->clk); goto err2; } diff --git a/drivers/watchdog/cpu5wdt.c b/drivers/watchdog/cpu5wdt.c index 5941ca601a3a..df72f90123df 100644 --- a/drivers/watchdog/cpu5wdt.c +++ b/drivers/watchdog/cpu5wdt.c @@ -59,9 +59,9 @@ static int ticks = 10000; static struct { struct completion stop; - volatile int running; + int running; struct timer_list timer; - volatile int queue; + int queue; int default_ticks; unsigned long inuse; } cpu5wdt_device; diff --git a/drivers/watchdog/hpwdt.c b/drivers/watchdog/hpwdt.c index a2e174b09fe7..6483d1066b95 100644 --- a/drivers/watchdog/hpwdt.c +++ b/drivers/watchdog/hpwdt.c @@ -58,41 +58,6 @@ struct bios32_service_dir { u8 reserved[5]; }; -/* - * smbios_entry_point - defines SMBIOS entry point structure - * - * anchor[4] - anchor string (_SM_) - * checksum - checksum of the entry point structure - * length - length of the entry point structure - * major_ver - major version (02h for revision 2.1) - * minor_ver - minor version (01h for revision 2.1) - * max_struct_size - size of the largest SMBIOS structure - * revision - entry point structure revision implemented - * formatted_area[5] - reserved - * intermediate_anchor[5] - intermediate anchor string (_DMI_) - * intermediate_checksum - intermediate checksum - * table_length - structure table length - * table_address - structure table address - * table_num_structs - number of SMBIOS structures present - * bcd_revision - BCD revision - */ -struct smbios_entry_point { - u8 anchor[4]; - u8 checksum; - u8 length; - u8 major_ver; - u8 minor_ver; - u16 max_struct_size; - u8 revision; - u8 formatted_area[5]; - u8 intermediate_anchor[5]; - u8 intermediate_checksum; - u16 table_length; - u64 table_address; - u16 table_num_structs; - u8 bcd_revision; -}; - /* type 212 */ struct smbios_cru64_info { u8 type; @@ -175,31 +140,13 @@ static struct pci_device_id hpwdt_devices[] = { }; MODULE_DEVICE_TABLE(pci, hpwdt_devices); -/* - * bios_checksum - */ -static int __devinit bios_checksum(const char __iomem *ptr, int len) -{ - char sum = 0; - int i; - - /* - * calculate checksum of size bytes. This should add up - * to zero if we have a valid header. - */ - for (i = 0; i < len; i++) - sum += ptr[i]; - - return ((sum == 0) && (len > 0)); -} - #ifndef CONFIG_X86_64 /* --32 Bit Bios------------------------------------------------------------ */ #define HPWDT_ARCH 32 -asmlinkage void asminline_call(struct cmn_registers *pi86Regs, - unsigned long *pRomEntry) +static void asminline_call(struct cmn_registers *pi86Regs, + unsigned long *pRomEntry) { asm("pushl %ebp \n\t" "movl %esp, %ebp \n\t" @@ -303,6 +250,24 @@ static int __devinit cru_detect(unsigned long map_entry, } /* + * bios_checksum + */ +static int __devinit bios_checksum(const char __iomem *ptr, int len) +{ + char sum = 0; + int i; + + /* + * calculate checksum of size bytes. This should add up + * to zero if we have a valid header. + */ + for (i = 0; i < len; i++) + sum += ptr[i]; + + return ((sum == 0) && (len > 0)); +} + +/* * bios32_present * * Routine Description: @@ -368,8 +333,8 @@ static int __devinit detect_cru_service(void) #define HPWDT_ARCH 64 -asmlinkage void asminline_call(struct cmn_registers *pi86Regs, - unsigned long *pRomEntry) +static void asminline_call(struct cmn_registers *pi86Regs, + unsigned long *pRomEntry) { asm("pushq %rbp \n\t" "movq %rsp, %rbp \n\t" @@ -410,12 +375,8 @@ asmlinkage void asminline_call(struct cmn_registers *pi86Regs, * dmi_find_cru * * Routine Description: - * This function checks wether or not a SMBIOS/DMI record is + * This function checks whether or not a SMBIOS/DMI record is * the 64bit CRU info or not - * - * Return Value: - * 0 : SUCCESS - if record found - * <0 : FAILURE - if record not found */ static void __devinit dmi_find_cru(const struct dmi_header *dm) { @@ -434,138 +395,11 @@ static void __devinit dmi_find_cru(const struct dmi_header *dm) } } -/* - * dmi_table - * - * Routine Description: - * Decode the SMBIOS/DMI table and check if we have a 64bit CRU record - * or not. - * - * We have to be cautious here. We have seen BIOSes with DMI pointers - * pointing to completely the wrong place for example - */ -static void __devinit dmi_table(u8 *buf, int len, int num, - void (*decode)(const struct dmi_header *)) -{ - u8 *data = buf; - int i = 0; - - /* - * Stop when we see all the items the table claimed to have - * OR we run off the end of the table (also happens) - */ - while ((i < num) && (data - buf + sizeof(struct dmi_header)) <= len) { - const struct dmi_header *dm = (const struct dmi_header *)data; - - /* - * We want to know the total length (formated area and strings) - * before decoding to make sure we won't run off the table in - * dmi_decode or dmi_string - */ - data += dm->length; - while ((data - buf < len - 1) && (data[0] || data[1])) - data++; - if (data - buf < len - 1) - decode(dm); - data += 2; - i++; - } -} - -/* - * smbios_present - * - * Routine Description: - * This function parses the SMBIOS entry point table to retrieve - * the 64 bit CRU Service. - * - * Return Value: - * 0 : SUCCESS - * <0 : FAILURE - */ -static int __devinit smbios_present(const char __iomem *p) -{ - struct smbios_entry_point *eps = - (struct smbios_entry_point *) p; - int length; - u8 *buf; - - /* check if we have indeed the SMBIOS table entry point */ - if ((strncmp((char *)eps->anchor, "_SM_", - sizeof(eps->anchor))) == 0) { - length = eps->length; - - /* SMBIOS v2.1 implementation might use 0x1e */ - if ((length == 0x1e) && - (eps->major_ver == 2) && - (eps->minor_ver == 1)) - length = 0x1f; - - /* - * Now we will check: - * - SMBIOS checksum must be 0 - * - intermediate anchor should be _DMI_ - * - intermediate checksum should be 0 - */ - if ((bios_checksum(p, length)) && - (strncmp((char *)eps->intermediate_anchor, "_DMI_", - sizeof(eps->intermediate_anchor)) == 0) && - (bios_checksum(p+0x10, 15))) { - buf = ioremap(eps->table_address, eps->table_length); - if (buf == NULL) - return -ENODEV; - - - /* Scan the DMI table for the 64 bit CRU service */ - dmi_table(buf, eps->table_length, - eps->table_num_structs, dmi_find_cru); - - iounmap(buf); - return 0; - } - } - - return -ENODEV; -} - -static int __devinit smbios_scan_machine(void) -{ - char __iomem *p, *q; - int rc; - - if (efi_enabled) { - if (efi.smbios == EFI_INVALID_TABLE_ADDR) - return -ENODEV; - - p = ioremap(efi.smbios, 32); - if (p == NULL) - return -ENOMEM; - - rc = smbios_present(p); - iounmap(p); - } else { - /* - * Search from 0x0f0000 through 0x0fffff, inclusive. - */ - p = ioremap(PCI_ROM_BASE1, ROM_SIZE); - if (p == NULL) - return -ENOMEM; - - for (q = p; q < p + ROM_SIZE; q += 16) { - rc = smbios_present(q); - if (!rc) { - break; - } - } - iounmap(p); - } -} - static int __devinit detect_cru_service(void) { cru_rom_addr = NULL; - smbios_scan_machine(); /* will become dmi_walk(dmi_find_cru); */ + dmi_walk(dmi_find_cru); /* if cru_rom_addr has been set then we found a CRU service */ return ((cru_rom_addr != NULL)? 0: -ENODEV); diff --git a/drivers/watchdog/it8712f_wdt.c b/drivers/watchdog/it8712f_wdt.c index 1b6d7d1b715d..1efcad3b6fca 100644 --- a/drivers/watchdog/it8712f_wdt.c +++ b/drivers/watchdog/it8712f_wdt.c @@ -7,7 +7,8 @@ * * drivers/char/watchdog/scx200_wdt.c * drivers/hwmon/it87.c - * IT8712F EC-LPC I/O Preliminary Specification 0.9.2.pdf + * IT8712F EC-LPC I/O Preliminary Specification 0.8.2 + * IT8712F EC-LPC I/O Preliminary Specification 0.9.3 * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as @@ -40,6 +41,7 @@ MODULE_DESCRIPTION("IT8712F Watchdog Driver"); MODULE_LICENSE("GPL"); MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); +static int max_units = 255; static int margin = 60; /* in seconds */ module_param(margin, int, 0); MODULE_PARM_DESC(margin, "Watchdog margin in seconds"); @@ -51,6 +53,7 @@ MODULE_PARM_DESC(nowayout, "Disable watchdog shutdown on close"); static struct semaphore it8712f_wdt_sem; static unsigned expect_close; static spinlock_t io_lock; +static unsigned char revision; /* Dog Food address - We use the game port address */ static unsigned short address; @@ -108,6 +111,15 @@ superio_inw(int reg) return val; } +static void +superio_outw(int val, int reg) +{ + outb(reg++, REG); + outb((val >> 8) & 0xff, VAL); + outb(reg, REG); + outb(val & 0xff, VAL); +} + static inline void superio_select(int ldn) { @@ -143,15 +155,33 @@ static void it8712f_wdt_update_margin(void) { int config = WDT_OUT_KRST | WDT_OUT_PWROK; - - printk(KERN_INFO NAME ": timer margin %d seconds\n", margin); - - /* The timeout register only has 8bits wide */ - if (margin < 256) - config |= WDT_UNIT_SEC; /* else UNIT are MINUTES */ + int units = margin; + + /* Switch to minutes precision if the configured margin + * value does not fit within the register width. + */ + if (units <= max_units) { + config |= WDT_UNIT_SEC; /* else UNIT is MINUTES */ + printk(KERN_INFO NAME ": timer margin %d seconds\n", units); + } else { + units /= 60; + printk(KERN_INFO NAME ": timer margin %d minutes\n", units); + } superio_outb(config, WDT_CONFIG); - superio_outb((margin > 255) ? (margin / 60) : margin, WDT_TIMEOUT); + if (revision >= 0x08) + superio_outw(units, WDT_TIMEOUT); + else + superio_outb(units, WDT_TIMEOUT); +} + +static int +it8712f_wdt_get_status(void) +{ + if (superio_inb(WDT_CONTROL) & 0x01) + return WDIOF_CARDRESET; + else + return 0; } static void @@ -234,7 +264,7 @@ it8712f_wdt_ioctl(struct inode *inode, struct file *file, .firmware_version = 1, .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING, }; - int new_margin; + int value; switch (cmd) { default: @@ -244,17 +274,27 @@ it8712f_wdt_ioctl(struct inode *inode, struct file *file, return -EFAULT; return 0; case WDIOC_GETSTATUS: + superio_enter(); + superio_select(LDN_GPIO); + + value = it8712f_wdt_get_status(); + + superio_exit(); + + return put_user(value, p); case WDIOC_GETBOOTSTATUS: return put_user(0, p); case WDIOC_KEEPALIVE: it8712f_wdt_ping(); return 0; case WDIOC_SETTIMEOUT: - if (get_user(new_margin, p)) + if (get_user(value, p)) return -EFAULT; - if (new_margin < 1) + if (value < 1) + return -EINVAL; + if (value > (max_units * 60)) return -EINVAL; - margin = new_margin; + margin = value; superio_enter(); superio_select(LDN_GPIO); @@ -262,6 +302,7 @@ it8712f_wdt_ioctl(struct inode *inode, struct file *file, superio_exit(); it8712f_wdt_ping(); + /* Fall through */ case WDIOC_GETTIMEOUT: if (put_user(margin, p)) return -EFAULT; @@ -336,9 +377,18 @@ it8712f_wdt_find(unsigned short *address) } err = 0; - printk(KERN_DEBUG NAME ": Found IT%04xF chip revision %d - " + revision = superio_inb(DEVREV) & 0x0f; + + /* Later revisions have 16-bit values per datasheet 0.9.1 */ + if (revision >= 0x08) + max_units = 65535; + + if (margin > (max_units * 60)) + margin = (max_units * 60); + + printk(KERN_INFO NAME ": Found IT%04xF chip revision %d - " "using DogFood address 0x%x\n", - chip_type, superio_inb(DEVREV) & 0x0f, *address); + chip_type, revision, *address); exit: superio_exit(); diff --git a/drivers/watchdog/machzwd.c b/drivers/watchdog/machzwd.c index e6e07b4575eb..6905135a776c 100644 --- a/drivers/watchdog/machzwd.c +++ b/drivers/watchdog/machzwd.c @@ -141,7 +141,7 @@ static unsigned long next_heartbeat = 0; #ifndef ZF_DEBUG # define dprintk(format, args...) #else -# define dprintk(format, args...) printk(KERN_DEBUG PFX ":%s:%d: " format, __FUNCTION__, __LINE__ , ## args) +# define dprintk(format, args...) printk(KERN_DEBUG PFX ":%s:%d: " format, __func__, __LINE__ , ## args) #endif diff --git a/drivers/watchdog/mtx-1_wdt.c b/drivers/watchdog/mtx-1_wdt.c index 789831b3fa00..10b89f2703bd 100644 --- a/drivers/watchdog/mtx-1_wdt.c +++ b/drivers/watchdog/mtx-1_wdt.c @@ -59,9 +59,9 @@ static int ticks = 100 * HZ; static struct { struct completion stop; - volatile int running; + int running; struct timer_list timer; - volatile int queue; + int queue; int default_ticks; unsigned long inuse; unsigned gpio; diff --git a/drivers/watchdog/pcwd_usb.c b/drivers/watchdog/pcwd_usb.c index 0f3fd6c9c354..bf443d077a1e 100644 --- a/drivers/watchdog/pcwd_usb.c +++ b/drivers/watchdog/pcwd_usb.c @@ -179,11 +179,11 @@ static void usb_pcwd_intr_done(struct urb *urb) case -ENOENT: case -ESHUTDOWN: /* this urb is terminated, clean up */ - dbg("%s - urb shutting down with status: %d", __FUNCTION__, urb->status); + dbg("%s - urb shutting down with status: %d", __func__, urb->status); return; /* -EPIPE: should clear the halt */ default: /* error */ - dbg("%s - nonzero urb status received: %d", __FUNCTION__, urb->status); + dbg("%s - nonzero urb status received: %d", __func__, urb->status); goto resubmit; } diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c index 5d1c15f83d23..7645e8812156 100644 --- a/drivers/watchdog/s3c2410_wdt.c +++ b/drivers/watchdog/s3c2410_wdt.c @@ -144,7 +144,7 @@ static int s3c2410wdt_start(void) } DBG("%s: wdt_count=0x%08x, wtcon=%08lx\n", - __FUNCTION__, wdt_count, wtcon); + __func__, wdt_count, wtcon); writel(wdt_count, wdt_base + S3C2410_WTDAT); writel(wdt_count, wdt_base + S3C2410_WTCNT); @@ -167,7 +167,7 @@ static int s3c2410wdt_set_heartbeat(int timeout) count = timeout * freq; DBG("%s: count=%d, timeout=%d, freq=%d\n", - __FUNCTION__, count, timeout, freq); + __func__, count, timeout, freq); /* if the count is bigger than the watchdog register, then work out what we need to do (and if) we can @@ -189,7 +189,7 @@ static int s3c2410wdt_set_heartbeat(int timeout) tmr_margin = timeout; DBG("%s: timeout=%d, divisor=%d, count=%d (%08x)\n", - __FUNCTION__, timeout, divisor, count, count/divisor); + __func__, timeout, divisor, count, count/divisor); count /= divisor; wdt_count = count; @@ -355,7 +355,7 @@ static int s3c2410wdt_probe(struct platform_device *pdev) int ret; int size; - DBG("%s: probe=%p\n", __FUNCTION__, pdev); + DBG("%s: probe=%p\n", __func__, pdev); dev = &pdev->dev; wdt_dev = &pdev->dev; diff --git a/drivers/watchdog/shwdt.c b/drivers/watchdog/shwdt.c index 61dde863bd40..1277f7e9cc54 100644 --- a/drivers/watchdog/shwdt.c +++ b/drivers/watchdog/shwdt.c @@ -298,7 +298,7 @@ static int sh_wdt_mmap(struct file *file, struct vm_area_struct *vma) if (io_remap_pfn_range(vma, vma->vm_start, addr >> PAGE_SHIFT, PAGE_SIZE, vma->vm_page_prot)) { printk(KERN_ERR PFX "%s: io_remap_pfn_range failed\n", - __FUNCTION__); + __func__); return -EAGAIN; } |