diff options
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/hwmon/Kconfig | 7 | ||||
-rw-r--r-- | drivers/hwmon/w83627hf.c | 72 |
2 files changed, 62 insertions, 17 deletions
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 7230d4e08196..99cdc612d2c6 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -406,13 +406,14 @@ config SENSORS_W83L785TS will be called w83l785ts. config SENSORS_W83627HF - tristate "Winbond W83627HF, W83627THF, W83637HF, W83697HF" - depends on HWMON && I2C && EXPERIMENTAL + tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF" + depends on HWMON && I2C select I2C_ISA select HWMON_VID help If you say yes here you get support for the Winbond W836X7 series - of sensor chips: the W83627HF, W83627THF, W83637HF, and the W83697HF + of sensor chips: the W83627HF, W83627THF, W83637HF, W83687THF and + W83697HF. This driver can also be built as a module. If so, the module will be called w83627hf. diff --git a/drivers/hwmon/w83627hf.c b/drivers/hwmon/w83627hf.c index 3d4888c178c9..992e34402705 100644 --- a/drivers/hwmon/w83627hf.c +++ b/drivers/hwmon/w83627hf.c @@ -28,6 +28,7 @@ w83627hf 9 3 2 3 0x20 0x5ca3 no yes(LPC) w83627thf 7 3 3 3 0x90 0x5ca3 no yes(LPC) w83637hf 7 3 3 3 0x80 0x5ca3 no yes(LPC) + w83687thf 7 3 3 3 0x90 0x5ca3 no yes(LPC) w83697hf 8 2 2 2 0x60 0x5ca3 no yes(LPC) For other winbond chips, and for i2c support in the above chips, @@ -63,7 +64,7 @@ MODULE_PARM_DESC(force_i2c, static unsigned short address; /* Insmod parameters */ -enum chips { any_chip, w83627hf, w83627thf, w83697hf, w83637hf }; +enum chips { any_chip, w83627hf, w83627thf, w83697hf, w83637hf, w83687thf }; static int reset; module_param(reset, bool, 0); @@ -101,6 +102,10 @@ static int VAL; /* The value to read/write */ #define W83627THF_GPIO5_IOSR 0xf3 /* w83627thf only */ #define W83627THF_GPIO5_DR 0xf4 /* w83627thf only */ +#define W83687THF_VID_EN 0x29 /* w83687thf only */ +#define W83687THF_VID_CFG 0xF0 /* w83687thf only */ +#define W83687THF_VID_DATA 0xF1 /* w83687thf only */ + static inline void superio_outb(int reg, int val) { @@ -139,6 +144,7 @@ superio_exit(void) #define W627THF_DEVID 0x82 #define W697_DEVID 0x60 #define W637_DEVID 0x70 +#define W687THF_DEVID 0x85 #define WINB_ACT_REG 0x30 #define WINB_BASE_REG 0x60 /* Constants specified below */ @@ -202,11 +208,11 @@ superio_exit(void) #define W83627HF_REG_PWM1 0x5A #define W83627HF_REG_PWM2 0x5B -#define W83627THF_REG_PWM1 0x01 /* 697HF and 637HF too */ -#define W83627THF_REG_PWM2 0x03 /* 697HF and 637HF too */ -#define W83627THF_REG_PWM3 0x11 /* 637HF too */ +#define W83627THF_REG_PWM1 0x01 /* 697HF/637HF/687THF too */ +#define W83627THF_REG_PWM2 0x03 /* 697HF/637HF/687THF too */ +#define W83627THF_REG_PWM3 0x11 /* 637HF/687THF too */ -#define W83627THF_REG_VRM_OVT_CFG 0x18 /* 637HF too */ +#define W83627THF_REG_VRM_OVT_CFG 0x18 /* 637HF/687THF too */ static const u8 regpwm_627hf[] = { W83627HF_REG_PWM1, W83627HF_REG_PWM2 }; static const u8 regpwm[] = { W83627THF_REG_PWM1, W83627THF_REG_PWM2, @@ -319,7 +325,7 @@ struct w83627hf_data { Default = 3435. Other Betas unimplemented */ u8 vrm; - u8 vrm_ovt; /* Register value, 627thf & 637hf only */ + u8 vrm_ovt; /* Register value, 627THF/637HF/687THF only */ }; @@ -414,7 +420,8 @@ static ssize_t show_in_0(struct w83627hf_data *data, char *buf, u8 reg) long in0; if ((data->vrm_ovt & 0x01) && - (w83627thf == data->type || w83637hf == data->type)) + (w83627thf == data->type || w83637hf == data->type + || w83687thf == data->type)) /* use VRM9 calculation */ in0 = (long)((reg * 488 + 70000 + 50) / 100); @@ -455,7 +462,8 @@ static ssize_t store_regs_in_min0(struct device *dev, struct device_attribute *a mutex_lock(&data->update_lock); if ((data->vrm_ovt & 0x01) && - (w83627thf == data->type || w83637hf == data->type)) + (w83627thf == data->type || w83637hf == data->type + || w83687thf == data->type)) /* use VRM9 calculation */ data->in_min[0] = @@ -482,7 +490,8 @@ static ssize_t store_regs_in_max0(struct device *dev, struct device_attribute *a mutex_lock(&data->update_lock); if ((data->vrm_ovt & 0x01) && - (w83627thf == data->type || w83637hf == data->type)) + (w83627thf == data->type || w83637hf == data->type + || w83687thf == data->type)) /* use VRM9 calculation */ data->in_max[0] = @@ -981,7 +990,8 @@ static int __init w83627hf_find(int sioaddr, unsigned short *addr) if(val != W627_DEVID && val != W627THF_DEVID && val != W697_DEVID && - val != W637_DEVID) { + val != W637_DEVID && + val != W687THF_DEVID) { superio_exit(); return -ENODEV; } @@ -1035,6 +1045,8 @@ static int w83627hf_detect(struct i2c_adapter *adapter) kind = w83627thf; else if(val == W637_DEVID) kind = w83637hf; + else if (val == W687THF_DEVID) + kind = w83687thf; else { dev_info(&adapter->dev, "Unsupported chip (dev_id=0x%02X).\n", val); @@ -1072,6 +1084,8 @@ static int w83627hf_detect(struct i2c_adapter *adapter) client_name = "w83697hf"; } else if (kind == w83637hf) { client_name = "w83637hf"; + } else if (kind == w83687thf) { + client_name = "w83687thf"; } /* Fill in the remaining client fields and put into the global list */ @@ -1107,7 +1121,7 @@ static int w83627hf_detect(struct i2c_adapter *adapter) device_create_file_in(new_client, 2); device_create_file_in(new_client, 3); device_create_file_in(new_client, 4); - if (kind != w83627thf && kind != w83637hf) { + if (kind == w83627hf || kind == w83697hf) { device_create_file_in(new_client, 5); device_create_file_in(new_client, 6); } @@ -1140,7 +1154,7 @@ static int w83627hf_detect(struct i2c_adapter *adapter) device_create_file_pwm(new_client, 1); device_create_file_pwm(new_client, 2); - if (kind == w83627thf || kind == w83637hf) + if (kind == w83627thf || kind == w83637hf || kind == w83687thf) device_create_file_pwm(new_client, 3); device_create_file_sensor(new_client, 1); @@ -1248,6 +1262,33 @@ exit: return res; } +static int w83687thf_read_vid(struct i2c_client *client) +{ + int res = 0xff; + + superio_enter(); + superio_select(W83627HF_LD_HWM); + + /* Make sure these GPIO pins are enabled */ + if (!(superio_inb(W83687THF_VID_EN) & (1 << 2))) { + dev_dbg(&client->dev, "VID disabled, no VID function\n"); + goto exit; + } + + /* Make sure the pins are configured for input */ + if (!(superio_inb(W83687THF_VID_CFG) & (1 << 4))) { + dev_dbg(&client->dev, "VID configured as output, " + "no VID function\n"); + goto exit; + } + + res = superio_inb(W83687THF_VID_DATA) & 0x3f; + +exit: + superio_exit(); + return res; +} + static int w83627hf_write_value(struct i2c_client *client, u16 reg, u16 value) { struct w83627hf_data *data = i2c_get_clientdata(client); @@ -1325,10 +1366,13 @@ static void w83627hf_init_client(struct i2c_client *client) data->vid = (lo & 0x0f) | ((hi & 0x01) << 4); } else if (w83627thf == data->type) { data->vid = w83627thf_read_gpio5(client); + } else if (w83687thf == data->type) { + data->vid = w83687thf_read_vid(client); } /* Read VRM & OVT Config only once */ - if (w83627thf == data->type || w83637hf == data->type) { + if (w83627thf == data->type || w83637hf == data->type + || w83687thf == data->type) { data->vrm_ovt = w83627hf_read_value(client, W83627THF_REG_VRM_OVT_CFG); } @@ -1395,7 +1439,7 @@ static struct w83627hf_data *w83627hf_update_device(struct device *dev) for (i = 0; i <= 8; i++) { /* skip missing sensors */ if (((data->type == w83697hf) && (i == 1)) || - ((data->type == w83627thf || data->type == w83637hf) + ((data->type != w83627hf && data->type != w83697hf) && (i == 5 || i == 6))) continue; data->in[i] = |