diff options
Diffstat (limited to 'drivers')
49 files changed, 935 insertions, 349 deletions
diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c index 89da43f73c00..fd37bfbfbcdb 100644 --- a/drivers/scsi/scsi_scan.c +++ b/drivers/scsi/scsi_scan.c @@ -1295,6 +1295,7 @@ EXPORT_SYMBOL(int_to_scsilun); * LUNs even if it's older than SCSI-3. * If BLIST_NOREPORTLUN is set, return 1 always. * If BLIST_NOLUN is set, return 0 always. + * If starget->no_report_luns is set, return 1 always. * * Return: * 0: scan completed (or no memory, so further scanning is futile) @@ -1321,6 +1322,7 @@ static int scsi_report_lun_scan(struct scsi_target *starget, int bflags, * Only support SCSI-3 and up devices if BLIST_NOREPORTLUN is not set. * Also allow SCSI-2 if BLIST_REPORTLUN2 is set and host adapter does * support more than 8 LUNs. + * Don't attempt if the target doesn't support REPORT LUNS. */ if (bflags & BLIST_NOREPORTLUN) return 1; @@ -1332,6 +1334,8 @@ static int scsi_report_lun_scan(struct scsi_target *starget, int bflags, return 1; if (bflags & BLIST_NOLUN) return 0; + if (starget->no_report_luns) + return 1; if (!(sdev = scsi_device_lookup_by_target(starget, 0))) { sdev = scsi_alloc_sdev(starget, 0, NULL); diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index c691fb50e6cb..d173b90b25e9 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -2349,7 +2349,7 @@ static int sd_try_extended_inquiry(struct scsi_device *sdp) * some USB ones crash on receiving them, and the pages * we currently ask for are for SPC-3 and beyond */ - if (sdp->scsi_level > SCSI_SPC_2) + if (sdp->scsi_level > SCSI_SPC_2 && !sdp->skip_vpd_pages) return 1; return 0; } diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig index 75823a1abeb6..0b0afc81a542 100644 --- a/drivers/usb/Kconfig +++ b/drivers/usb/Kconfig @@ -76,6 +76,7 @@ config USB_ARCH_HAS_EHCI default y if MICROBLAZE default y if SPARC_LEON default y if ARCH_MMP + default y if MACH_LOONGSON1 default PCI # some non-PCI HCDs implement xHCI diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c index d2b3cffca3f7..b27bbb957e16 100644 --- a/drivers/usb/class/cdc-wdm.c +++ b/drivers/usb/class/cdc-wdm.c @@ -31,6 +31,8 @@ #define DRIVER_AUTHOR "Oliver Neukum" #define DRIVER_DESC "USB Abstract Control Model driver for USB WCM Device Management" +#define HUAWEI_VENDOR_ID 0x12D1 + static const struct usb_device_id wdm_ids[] = { { .match_flags = USB_DEVICE_ID_MATCH_INT_CLASS | @@ -38,6 +40,20 @@ static const struct usb_device_id wdm_ids[] = { .bInterfaceClass = USB_CLASS_COMM, .bInterfaceSubClass = USB_CDC_SUBCLASS_DMM }, + { + /* + * Huawei E392, E398 and possibly other Qualcomm based modems + * embed the Qualcomm QMI protocol inside CDC on CDC ECM like + * control interfaces. Userspace access to this is required + * to configure the accompanying data interface + */ + .match_flags = USB_DEVICE_ID_MATCH_VENDOR | + USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = HUAWEI_VENDOR_ID, + .bInterfaceClass = USB_CLASS_VENDOR_SPEC, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 9, /* NOTE: CDC ECM control interface! */ + }, { } }; @@ -54,6 +70,7 @@ MODULE_DEVICE_TABLE (usb, wdm_ids); #define WDM_POLL_RUNNING 6 #define WDM_RESPONDING 7 #define WDM_SUSPENDING 8 +#define WDM_RESETTING 9 #define WDM_MAX 16 @@ -82,7 +99,6 @@ struct wdm_device { u16 bufsize; u16 wMaxCommand; u16 wMaxPacketSize; - u16 bMaxPacketSize0; __le16 inum; int reslength; int length; @@ -162,11 +178,9 @@ static void wdm_int_callback(struct urb *urb) int rv = 0; int status = urb->status; struct wdm_device *desc; - struct usb_ctrlrequest *req; struct usb_cdc_notification *dr; desc = urb->context; - req = desc->irq; dr = (struct usb_cdc_notification *)desc->sbuf; if (status) { @@ -213,24 +227,6 @@ static void wdm_int_callback(struct urb *urb) goto exit; } - req->bRequestType = (USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE); - req->bRequest = USB_CDC_GET_ENCAPSULATED_RESPONSE; - req->wValue = 0; - req->wIndex = desc->inum; - req->wLength = cpu_to_le16(desc->wMaxCommand); - - usb_fill_control_urb( - desc->response, - interface_to_usbdev(desc->intf), - /* using common endpoint 0 */ - usb_rcvctrlpipe(interface_to_usbdev(desc->intf), 0), - (unsigned char *)req, - desc->inbuf, - desc->wMaxCommand, - wdm_in_callback, - desc - ); - desc->response->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; spin_lock(&desc->iuspin); clear_bit(WDM_READ, &desc->flags); set_bit(WDM_RESPONDING, &desc->flags); @@ -279,14 +275,8 @@ static void free_urbs(struct wdm_device *desc) static void cleanup(struct wdm_device *desc) { - usb_free_coherent(interface_to_usbdev(desc->intf), - desc->wMaxPacketSize, - desc->sbuf, - desc->validity->transfer_dma); - usb_free_coherent(interface_to_usbdev(desc->intf), - desc->bMaxPacketSize0, - desc->inbuf, - desc->response->transfer_dma); + kfree(desc->sbuf); + kfree(desc->inbuf); kfree(desc->orq); kfree(desc->irq); kfree(desc->ubuf); @@ -351,6 +341,10 @@ static ssize_t wdm_write else if (test_bit(WDM_IN_USE, &desc->flags)) r = -EAGAIN; + + if (test_bit(WDM_RESETTING, &desc->flags)) + r = -EIO; + if (r < 0) { kfree(buf); goto out; @@ -430,6 +424,10 @@ retry: rv = -ENODEV; goto err; } + if (test_bit(WDM_RESETTING, &desc->flags)) { + rv = -EIO; + goto err; + } usb_mark_last_busy(interface_to_usbdev(desc->intf)); if (rv < 0) { rv = -ERESTARTSYS; @@ -631,7 +629,6 @@ static void wdm_rxwork(struct work_struct *work) static int wdm_probe(struct usb_interface *intf, const struct usb_device_id *id) { int rv = -EINVAL; - struct usb_device *udev = interface_to_usbdev(intf); struct wdm_device *desc; struct usb_host_interface *iface; struct usb_endpoint_descriptor *ep; @@ -692,7 +689,6 @@ next_desc: goto err; desc->wMaxPacketSize = usb_endpoint_maxp(ep); - desc->bMaxPacketSize0 = udev->descriptor.bMaxPacketSize0; desc->orq = kmalloc(sizeof(struct usb_ctrlrequest), GFP_KERNEL); if (!desc->orq) @@ -717,19 +713,13 @@ next_desc: if (!desc->ubuf) goto err; - desc->sbuf = usb_alloc_coherent(interface_to_usbdev(intf), - desc->wMaxPacketSize, - GFP_KERNEL, - &desc->validity->transfer_dma); + desc->sbuf = kmalloc(desc->wMaxPacketSize, GFP_KERNEL); if (!desc->sbuf) goto err; - desc->inbuf = usb_alloc_coherent(interface_to_usbdev(intf), - desc->wMaxCommand, - GFP_KERNEL, - &desc->response->transfer_dma); + desc->inbuf = kmalloc(desc->wMaxCommand, GFP_KERNEL); if (!desc->inbuf) - goto err2; + goto err; usb_fill_int_urb( desc->validity, @@ -741,30 +731,39 @@ next_desc: desc, ep->bInterval ); - desc->validity->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; + + desc->irq->bRequestType = (USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE); + desc->irq->bRequest = USB_CDC_GET_ENCAPSULATED_RESPONSE; + desc->irq->wValue = 0; + desc->irq->wIndex = desc->inum; + desc->irq->wLength = cpu_to_le16(desc->wMaxCommand); + + usb_fill_control_urb( + desc->response, + interface_to_usbdev(intf), + /* using common endpoint 0 */ + usb_rcvctrlpipe(interface_to_usbdev(desc->intf), 0), + (unsigned char *)desc->irq, + desc->inbuf, + desc->wMaxCommand, + wdm_in_callback, + desc + ); usb_set_intfdata(intf, desc); rv = usb_register_dev(intf, &wdm_class); if (rv < 0) - goto err3; + goto err2; else - dev_info(&intf->dev, "cdc-wdm%d: USB WDM device\n", - intf->minor - WDM_MINOR_BASE); + dev_info(&intf->dev, "%s: USB WDM device\n", dev_name(intf->usb_dev)); out: return rv; -err3: - usb_set_intfdata(intf, NULL); - usb_free_coherent(interface_to_usbdev(desc->intf), - desc->bMaxPacketSize0, - desc->inbuf, - desc->response->transfer_dma); err2: - usb_free_coherent(interface_to_usbdev(desc->intf), - desc->wMaxPacketSize, - desc->sbuf, - desc->validity->transfer_dma); + usb_set_intfdata(intf, NULL); err: free_urbs(desc); + kfree(desc->inbuf); + kfree(desc->sbuf); kfree(desc->ubuf); kfree(desc->orq); kfree(desc->irq); @@ -869,10 +868,6 @@ static int wdm_pre_reset(struct usb_interface *intf) { struct wdm_device *desc = usb_get_intfdata(intf); - mutex_lock(&desc->rlock); - mutex_lock(&desc->wlock); - kill_urbs(desc); - /* * we notify everybody using poll of * an exceptional situation @@ -880,9 +875,16 @@ static int wdm_pre_reset(struct usb_interface *intf) * message from the device is lost */ spin_lock_irq(&desc->iuspin); + set_bit(WDM_RESETTING, &desc->flags); /* inform read/write */ + set_bit(WDM_READ, &desc->flags); /* unblock read */ + clear_bit(WDM_IN_USE, &desc->flags); /* unblock write */ desc->rerr = -EINTR; spin_unlock_irq(&desc->iuspin); wake_up_all(&desc->wait); + mutex_lock(&desc->rlock); + mutex_lock(&desc->wlock); + kill_urbs(desc); + cancel_work_sync(&desc->rxwork); return 0; } @@ -891,6 +893,7 @@ static int wdm_post_reset(struct usb_interface *intf) struct wdm_device *desc = usb_get_intfdata(intf); int rv; + clear_bit(WDM_RESETTING, &desc->flags); rv = recover_from_urb_loss(desc); mutex_unlock(&desc->wlock); mutex_unlock(&desc->rlock); diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index d40ff9568813..d77daf3683da 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -958,13 +958,8 @@ void usb_rebind_intf(struct usb_interface *intf) int rc; /* Delayed unbind of an existing driver */ - if (intf->dev.driver) { - struct usb_driver *driver = - to_usb_driver(intf->dev.driver); - - dev_dbg(&intf->dev, "forced unbind\n"); - usb_driver_release_interface(driver, intf); - } + if (intf->dev.driver) + usb_forced_unbind_intf(intf); /* Try to rebind the interface */ if (!intf->dev.power.is_prepared) { @@ -977,15 +972,13 @@ void usb_rebind_intf(struct usb_interface *intf) #ifdef CONFIG_PM -#define DO_UNBIND 0 -#define DO_REBIND 1 - -/* Unbind drivers for @udev's interfaces that don't support suspend/resume, - * or rebind interfaces that have been unbound, according to @action. +/* Unbind drivers for @udev's interfaces that don't support suspend/resume + * There is no check for reset_resume here because it can be determined + * only during resume whether reset_resume is needed. * * The caller must hold @udev's device lock. */ -static void do_unbind_rebind(struct usb_device *udev, int action) +static void unbind_no_pm_drivers_interfaces(struct usb_device *udev) { struct usb_host_config *config; int i; @@ -996,23 +989,53 @@ static void do_unbind_rebind(struct usb_device *udev, int action) if (config) { for (i = 0; i < config->desc.bNumInterfaces; ++i) { intf = config->interface[i]; - switch (action) { - case DO_UNBIND: - if (intf->dev.driver) { - drv = to_usb_driver(intf->dev.driver); - if (!drv->suspend || !drv->resume) - usb_forced_unbind_intf(intf); - } - break; - case DO_REBIND: - if (intf->needs_binding) - usb_rebind_intf(intf); - break; + + if (intf->dev.driver) { + drv = to_usb_driver(intf->dev.driver); + if (!drv->suspend || !drv->resume) + usb_forced_unbind_intf(intf); } } } } +/* Unbind drivers for @udev's interfaces that failed to support reset-resume. + * These interfaces have the needs_binding flag set by usb_resume_interface(). + * + * The caller must hold @udev's device lock. + */ +static void unbind_no_reset_resume_drivers_interfaces(struct usb_device *udev) +{ + struct usb_host_config *config; + int i; + struct usb_interface *intf; + + config = udev->actconfig; + if (config) { + for (i = 0; i < config->desc.bNumInterfaces; ++i) { + intf = config->interface[i]; + if (intf->dev.driver && intf->needs_binding) + usb_forced_unbind_intf(intf); + } + } +} + +static void do_rebind_interfaces(struct usb_device *udev) +{ + struct usb_host_config *config; + int i; + struct usb_interface *intf; + + config = udev->actconfig; + if (config) { + for (i = 0; i < config->desc.bNumInterfaces; ++i) { + intf = config->interface[i]; + if (intf->needs_binding) + usb_rebind_intf(intf); + } + } +} + static int usb_suspend_device(struct usb_device *udev, pm_message_t msg) { struct usb_device_driver *udriver; @@ -1302,35 +1325,48 @@ int usb_suspend(struct device *dev, pm_message_t msg) { struct usb_device *udev = to_usb_device(dev); - do_unbind_rebind(udev, DO_UNBIND); + unbind_no_pm_drivers_interfaces(udev); + + /* From now on we are sure all drivers support suspend/resume + * but not necessarily reset_resume() + * so we may still need to unbind and rebind upon resume + */ choose_wakeup(udev, msg); return usb_suspend_both(udev, msg); } /* The device lock is held by the PM core */ +int usb_resume_complete(struct device *dev) +{ + struct usb_device *udev = to_usb_device(dev); + + /* For PM complete calls, all we do is rebind interfaces + * whose needs_binding flag is set + */ + if (udev->state != USB_STATE_NOTATTACHED) + do_rebind_interfaces(udev); + return 0; +} + +/* The device lock is held by the PM core */ int usb_resume(struct device *dev, pm_message_t msg) { struct usb_device *udev = to_usb_device(dev); int status; - /* For PM complete calls, all we do is rebind interfaces */ - if (msg.event == PM_EVENT_ON) { - if (udev->state != USB_STATE_NOTATTACHED) - do_unbind_rebind(udev, DO_REBIND); - status = 0; - - /* For all other calls, take the device back to full power and + /* For all calls, take the device back to full power and * tell the PM core in case it was autosuspended previously. - * Unbind the interfaces that will need rebinding later. + * Unbind the interfaces that will need rebinding later, + * because they fail to support reset_resume. + * (This can't be done in usb_resume_interface() + * above because it doesn't own the right set of locks.) */ - } else { - status = usb_resume_both(udev, msg); - if (status == 0) { - pm_runtime_disable(dev); - pm_runtime_set_active(dev); - pm_runtime_enable(dev); - do_unbind_rebind(udev, DO_REBIND); - } + status = usb_resume_both(udev, msg); + if (status == 0) { + pm_runtime_disable(dev); + pm_runtime_set_active(dev); + pm_runtime_enable(dev); + unbind_no_reset_resume_drivers_interfaces(udev); } /* Avoid PM error messages for devices disconnected while suspended diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 265c2f675d04..72c51cdce906 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -62,6 +62,8 @@ struct usb_hub { resumed */ unsigned long removed_bits[1]; /* ports with a "removed" device present */ + unsigned long wakeup_bits[1]; /* ports that have signaled + remote wakeup */ #if USB_MAXCHILDREN > 31 /* 8*sizeof(unsigned long) - 1 */ #error event_bits[] is too short! #endif @@ -411,6 +413,29 @@ void usb_kick_khubd(struct usb_device *hdev) kick_khubd(hub); } +/* + * Let the USB core know that a USB 3.0 device has sent a Function Wake Device + * Notification, which indicates it had initiated remote wakeup. + * + * USB 3.0 hubs do not report the port link state change from U3 to U0 when the + * device initiates resume, so the USB core will not receive notice of the + * resume through the normal hub interrupt URB. + */ +void usb_wakeup_notification(struct usb_device *hdev, + unsigned int portnum) +{ + struct usb_hub *hub; + + if (!hdev) + return; + + hub = hdev_to_hub(hdev); + if (hub) { + set_bit(portnum, hub->wakeup_bits); + kick_khubd(hub); + } +} +EXPORT_SYMBOL_GPL(usb_wakeup_notification); /* completion function, fires on port status changes and various faults */ static void hub_irq(struct urb *urb) @@ -823,12 +848,6 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) clear_port_feature(hub->hdev, port1, USB_PORT_FEAT_C_ENABLE); } - if (portchange & USB_PORT_STAT_C_LINK_STATE) { - need_debounce_delay = true; - clear_port_feature(hub->hdev, port1, - USB_PORT_FEAT_C_PORT_LINK_STATE); - } - if ((portchange & USB_PORT_STAT_C_BH_RESET) && hub_is_superspeed(hub->hdev)) { need_debounce_delay = true; @@ -850,12 +869,19 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) set_bit(port1, hub->change_bits); } else if (portstatus & USB_PORT_STAT_ENABLE) { + bool port_resumed = (portstatus & + USB_PORT_STAT_LINK_STATE) == + USB_SS_PORT_LS_U0; /* The power session apparently survived the resume. * If there was an overcurrent or suspend change * (i.e., remote wakeup request), have khubd - * take care of it. + * take care of it. Look at the port link state + * for USB 3.0 hubs, since they don't have a suspend + * change bit, and they don't set the port link change + * bit on device-initiated resume. */ - if (portchange) + if (portchange || (hub_is_superspeed(hub->hdev) && + port_resumed)) set_bit(port1, hub->change_bits); } else if (udev->persist_enabled) { @@ -1293,14 +1319,8 @@ static int hub_probe(struct usb_interface *intf, const struct usb_device_id *id) desc = intf->cur_altsetting; hdev = interface_to_usbdev(intf); - /* Hubs have proper suspend/resume support. USB 3.0 device suspend is - * different from USB 2.0/1.1 device suspend, and unfortunately we - * don't support it yet. So leave autosuspend disabled for USB 3.0 - * external hubs for now. Enable autosuspend for USB 3.0 roothubs, - * since that isn't a "real" hub. - */ - if (!hub_is_superspeed(hdev) || !hdev->parent) - usb_enable_autosuspend(hdev); + /* Hubs have proper suspend/resume support. */ + usb_enable_autosuspend(hdev); if (hdev->level == MAX_TOPO_LEVEL) { dev_err(&intf->dev, @@ -1842,6 +1862,37 @@ fail: return err; } +static void set_usb_port_removable(struct usb_device *udev) +{ + struct usb_device *hdev = udev->parent; + struct usb_hub *hub; + u8 port = udev->portnum; + u16 wHubCharacteristics; + bool removable = true; + + if (!hdev) + return; + + hub = hdev_to_hub(udev->parent); + + wHubCharacteristics = le16_to_cpu(hub->descriptor->wHubCharacteristics); + + if (!(wHubCharacteristics & HUB_CHAR_COMPOUND)) + return; + + if (hub_is_superspeed(hdev)) { + if (hub->descriptor->u.ss.DeviceRemovable & (1 << port)) + removable = false; + } else { + if (hub->descriptor->u.hs.DeviceRemovable[port / 8] & (1 << (port % 8))) + removable = false; + } + + if (removable) + udev->removable = USB_DEVICE_REMOVABLE; + else + udev->removable = USB_DEVICE_FIXED; +} /** * usb_new_device - perform initial device setup (usbcore-internal) @@ -1900,6 +1951,15 @@ int usb_new_device(struct usb_device *udev) announce_device(udev); device_enable_async_suspend(&udev->dev); + + /* + * check whether the hub marks this port as non-removable. Do it + * now so that platform-specific data can override it in + * device_add() + */ + if (udev->parent) + set_usb_port_removable(udev); + /* Register the device. The device driver is responsible * for configuring the device and invoking the add-device * notifier chain (used by usbfs and possibly others). @@ -2385,11 +2445,27 @@ int usb_port_suspend(struct usb_device *udev, pm_message_t msg) * we don't explicitly enable it here. */ if (udev->do_remote_wakeup) { - status = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), - USB_REQ_SET_FEATURE, USB_RECIP_DEVICE, - USB_DEVICE_REMOTE_WAKEUP, 0, - NULL, 0, - USB_CTRL_SET_TIMEOUT); + if (!hub_is_superspeed(hub->hdev)) { + status = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + USB_REQ_SET_FEATURE, USB_RECIP_DEVICE, + USB_DEVICE_REMOTE_WAKEUP, 0, + NULL, 0, + USB_CTRL_SET_TIMEOUT); + } else { + /* Assume there's only one function on the USB 3.0 + * device and enable remote wake for the first + * interface. FIXME if the interface association + * descriptor shows there's more than one function. + */ + status = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + USB_REQ_SET_FEATURE, + USB_RECIP_INTERFACE, + USB_INTRF_FUNC_SUSPEND, + USB_INTRF_FUNC_SUSPEND_RW | + USB_INTRF_FUNC_SUSPEND_LP, + NULL, 0, + USB_CTRL_SET_TIMEOUT); + } if (status) { dev_dbg(&udev->dev, "won't remote wakeup, status %d\n", status); @@ -2679,6 +2755,7 @@ static int hub_suspend(struct usb_interface *intf, pm_message_t msg) struct usb_hub *hub = usb_get_intfdata (intf); struct usb_device *hdev = hub->hdev; unsigned port1; + int status; /* Warn if children aren't already suspended */ for (port1 = 1; port1 <= hdev->maxchild; port1++) { @@ -2691,6 +2768,17 @@ static int hub_suspend(struct usb_interface *intf, pm_message_t msg) return -EBUSY; } } + if (hub_is_superspeed(hdev) && hdev->do_remote_wakeup) { + /* Enable hub to send remote wakeup for all ports. */ + for (port1 = 1; port1 <= hdev->maxchild; port1++) { + status = set_port_feature(hdev, + port1 | + USB_PORT_FEAT_REMOTE_WAKE_CONNECT | + USB_PORT_FEAT_REMOTE_WAKE_DISCONNECT | + USB_PORT_FEAT_REMOTE_WAKE_OVER_CURRENT, + USB_PORT_FEAT_REMOTE_WAKE_MASK); + } + } dev_dbg(&intf->dev, "%s\n", __func__); @@ -3424,6 +3512,46 @@ done: hcd->driver->relinquish_port(hcd, port1); } +/* Returns 1 if there was a remote wakeup and a connect status change. */ +static int hub_handle_remote_wakeup(struct usb_hub *hub, unsigned int port, + u16 portstatus, u16 portchange) +{ + struct usb_device *hdev; + struct usb_device *udev; + int connect_change = 0; + int ret; + + hdev = hub->hdev; + udev = hdev->children[port-1]; + if (!hub_is_superspeed(hdev)) { + if (!(portchange & USB_PORT_STAT_C_SUSPEND)) + return 0; + clear_port_feature(hdev, port, USB_PORT_FEAT_C_SUSPEND); + } else { + if (!udev || udev->state != USB_STATE_SUSPENDED || + (portstatus & USB_PORT_STAT_LINK_STATE) != + USB_SS_PORT_LS_U0) + return 0; + } + + if (udev) { + /* TRSMRCY = 10 msec */ + msleep(10); + + usb_lock_device(udev); + ret = usb_remote_wakeup(udev); + usb_unlock_device(udev); + if (ret < 0) + connect_change = 1; + } else { + ret = -ENODEV; + hub_port_disable(hub, port, 1); + } + dev_dbg(hub->intfdev, "resume on port %d, status %d\n", + port, ret); + return connect_change; +} + static void hub_events(void) { struct list_head *tmp; @@ -3436,7 +3564,7 @@ static void hub_events(void) u16 portstatus; u16 portchange; int i, ret; - int connect_change; + int connect_change, wakeup_change; /* * We restart the list every time to avoid a deadlock with @@ -3515,8 +3643,9 @@ static void hub_events(void) if (test_bit(i, hub->busy_bits)) continue; connect_change = test_bit(i, hub->change_bits); + wakeup_change = test_and_clear_bit(i, hub->wakeup_bits); if (!test_and_clear_bit(i, hub->event_bits) && - !connect_change) + !connect_change && !wakeup_change) continue; ret = hub_port_status(hub, i, @@ -3557,31 +3686,10 @@ static void hub_events(void) } } - if (portchange & USB_PORT_STAT_C_SUSPEND) { - struct usb_device *udev; + if (hub_handle_remote_wakeup(hub, i, + portstatus, portchange)) + connect_change = 1; - clear_port_feature(hdev, i, - USB_PORT_FEAT_C_SUSPEND); - udev = hdev->children[i-1]; - if (udev) { - /* TRSMRCY = 10 msec */ - msleep(10); - - usb_lock_device(udev); - ret = usb_remote_wakeup(hdev-> - children[i-1]); - usb_unlock_device(udev); - if (ret < 0) - connect_change = 1; - } else { - ret = -ENODEV; - hub_port_disable(hub, i, 1); - } - dev_dbg (hub_dev, - "resume on port %d, status %d\n", - i, ret); - } - if (portchange & USB_PORT_STAT_C_OVERCURRENT) { u16 status = 0; u16 unused; diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c index 9e491ca2e5c4..566d9f94f735 100644 --- a/drivers/usb/core/sysfs.c +++ b/drivers/usb/core/sysfs.c @@ -230,6 +230,28 @@ show_urbnum(struct device *dev, struct device_attribute *attr, char *buf) } static DEVICE_ATTR(urbnum, S_IRUGO, show_urbnum, NULL); +static ssize_t +show_removable(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct usb_device *udev; + char *state; + + udev = to_usb_device(dev); + + switch (udev->removable) { + case USB_DEVICE_REMOVABLE: + state = "removable"; + break; + case USB_DEVICE_FIXED: + state = "fixed"; + break; + default: + state = "unknown"; + } + + return sprintf(buf, "%s\n", state); +} +static DEVICE_ATTR(removable, S_IRUGO, show_removable, NULL); #ifdef CONFIG_PM @@ -626,6 +648,7 @@ static struct attribute *dev_attrs[] = { &dev_attr_avoid_reset_quirk.attr, &dev_attr_authorized.attr, &dev_attr_remove.attr, + &dev_attr_removable.attr, NULL, }; static struct attribute_group dev_attr_grp = { diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c index 909625b91eb3..f4f20c7b7765 100644 --- a/drivers/usb/core/urb.c +++ b/drivers/usb/core/urb.c @@ -403,20 +403,17 @@ int usb_submit_urb(struct urb *urb, gfp_t mem_flags) * cause problems in HCDs if they get it wrong. */ { - unsigned int orig_flags = urb->transfer_flags; unsigned int allowed; static int pipetypes[4] = { PIPE_CONTROL, PIPE_ISOCHRONOUS, PIPE_BULK, PIPE_INTERRUPT }; /* Check that the pipe's type matches the endpoint's type */ - if (usb_pipetype(urb->pipe) != pipetypes[xfertype]) { - dev_err(&dev->dev, "BOGUS urb xfer, pipe %x != type %x\n", + if (usb_pipetype(urb->pipe) != pipetypes[xfertype]) + dev_WARN(&dev->dev, "BOGUS urb xfer, pipe %x != type %x\n", usb_pipetype(urb->pipe), pipetypes[xfertype]); - return -EPIPE; /* The most suitable error code :-) */ - } - /* enforce simple/standard policy */ + /* Check against a simple/standard policy */ allowed = (URB_NO_TRANSFER_DMA_MAP | URB_NO_INTERRUPT | URB_DIR_MASK | URB_FREE_BUFFER); switch (xfertype) { @@ -435,14 +432,12 @@ int usb_submit_urb(struct urb *urb, gfp_t mem_flags) allowed |= URB_ISO_ASAP; break; } - urb->transfer_flags &= allowed; + allowed &= urb->transfer_flags; - /* fail if submitter gave bogus flags */ - if (urb->transfer_flags != orig_flags) { - dev_err(&dev->dev, "BOGUS urb flags, %x --> %x\n", - orig_flags, urb->transfer_flags); - return -EINVAL; - } + /* warn if submitter gave bogus flags */ + if (allowed != urb->transfer_flags) + dev_WARN(&dev->dev, "BOGUS urb flags, %x --> %x\n", + urb->transfer_flags, allowed); } #endif /* diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c index 8ca9f994a280..c74ba7bbc748 100644 --- a/drivers/usb/core/usb.c +++ b/drivers/usb/core/usb.c @@ -274,7 +274,7 @@ static int usb_dev_prepare(struct device *dev) static void usb_dev_complete(struct device *dev) { /* Currently used only for rebinding interfaces */ - usb_resume(dev, PMSG_ON); /* FIXME: change to PMSG_COMPLETE */ + usb_resume_complete(dev); } static int usb_dev_suspend(struct device *dev) diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h index 45e8479c377d..71648dcbe438 100644 --- a/drivers/usb/core/usb.h +++ b/drivers/usb/core/usb.h @@ -56,6 +56,7 @@ extern void usb_major_cleanup(void); extern int usb_suspend(struct device *dev, pm_message_t msg); extern int usb_resume(struct device *dev, pm_message_t msg); +extern int usb_resume_complete(struct device *dev); extern int usb_port_suspend(struct usb_device *dev, pm_message_t msg); extern int usb_port_resume(struct usb_device *dev, pm_message_t msg); diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c index c26a82e83f6e..10e008a730a5 100644 --- a/drivers/usb/host/ehci-fsl.c +++ b/drivers/usb/host/ehci-fsl.c @@ -323,7 +323,9 @@ static int ehci_fsl_setup(struct usb_hcd *hcd) struct ehci_hcd *ehci = hcd_to_ehci(hcd); int retval; struct fsl_usb2_platform_data *pdata; + struct device *dev; + dev = hcd->self.controller; pdata = hcd->self.controller->platform_data; ehci->big_endian_desc = pdata->big_endian_desc; ehci->big_endian_mmio = pdata->big_endian_mmio; @@ -353,6 +355,16 @@ static int ehci_fsl_setup(struct usb_hcd *hcd) ehci_reset(ehci); + if (of_device_is_compatible(dev->parent->of_node, + "fsl,mpc5121-usb2-dr")) { + /* + * set SBUSCFG:AHBBRST so that control msgs don't + * fail when doing heavy PATA writes. + */ + ehci_writel(ehci, SBUSCFG_INCR8, + hcd->regs + FSL_SOC_USB_SBUSCFG); + } + retval = ehci_fsl_reinit(ehci); return retval; } @@ -476,6 +488,8 @@ static int ehci_fsl_mpc512x_drv_resume(struct device *dev) ehci_writel(ehci, ISIPHYCTRL_PXE | ISIPHYCTRL_PHYE, hcd->regs + FSL_SOC_USB_ISIPHYCTRL); + ehci_writel(ehci, SBUSCFG_INCR8, hcd->regs + FSL_SOC_USB_SBUSCFG); + /* restore EHCI registers */ ehci_writel(ehci, pdata->pm_command, &ehci->regs->command); ehci_writel(ehci, pdata->pm_intr_enable, &ehci->regs->intr_enable); diff --git a/drivers/usb/host/ehci-fsl.h b/drivers/usb/host/ehci-fsl.h index bdf43e2adc51..6d5a94e9bb3c 100644 --- a/drivers/usb/host/ehci-fsl.h +++ b/drivers/usb/host/ehci-fsl.h @@ -19,6 +19,8 @@ #define _EHCI_FSL_H /* offsets for the non-ehci registers in the FSL SOC USB controller */ +#define FSL_SOC_USB_SBUSCFG 0x90 +#define SBUSCFG_INCR8 0x02 /* INCR8, specified */ #define FSL_SOC_USB_ULPIVP 0x170 #define FSL_SOC_USB_PORTSC1 0x184 #define PORT_PTS_MSK (3<<30) diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index a007a9fe0f87..4918b0c59af9 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -1376,6 +1376,11 @@ MODULE_LICENSE ("GPL"); #define PLATFORM_DRIVER ehci_mv_driver #endif +#ifdef CONFIG_MACH_LOONGSON1 +#include "ehci-ls1x.c" +#define PLATFORM_DRIVER ehci_ls1x_driver +#endif + #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \ !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) && \ !defined(XILINX_OF_PLATFORM_DRIVER) diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c index 77bbb2357e47..01011dd0cb5d 100644 --- a/drivers/usb/host/ehci-hub.c +++ b/drivers/usb/host/ehci-hub.c @@ -107,7 +107,7 @@ static void ehci_handover_companion_ports(struct ehci_hcd *ehci) ehci->owned_ports = 0; } -static int ehci_port_change(struct ehci_hcd *ehci) +static int __maybe_unused ehci_port_change(struct ehci_hcd *ehci) { int i = HCS_N_PORTS(ehci->hcs_params); @@ -1076,7 +1076,8 @@ error_exit: return retval; } -static void ehci_relinquish_port(struct usb_hcd *hcd, int portnum) +static void __maybe_unused ehci_relinquish_port(struct usb_hcd *hcd, + int portnum) { struct ehci_hcd *ehci = hcd_to_ehci(hcd); @@ -1085,7 +1086,8 @@ static void ehci_relinquish_port(struct usb_hcd *hcd, int portnum) set_owner(ehci, --portnum, PORT_OWNER); } -static int ehci_port_handed_over(struct usb_hcd *hcd, int portnum) +static int __maybe_unused ehci_port_handed_over(struct usb_hcd *hcd, + int portnum) { struct ehci_hcd *ehci = hcd_to_ehci(hcd); u32 __iomem *reg; diff --git a/drivers/usb/host/ehci-ls1x.c b/drivers/usb/host/ehci-ls1x.c new file mode 100644 index 000000000000..a283e59709d6 --- /dev/null +++ b/drivers/usb/host/ehci-ls1x.c @@ -0,0 +1,159 @@ +/* + * Bus Glue for Loongson LS1X built-in EHCI controller. + * + * Copyright (c) 2012 Zhang, Keguang <keguang.zhang@gmail.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + + +#include <linux/platform_device.h> + +static int ehci_ls1x_reset(struct usb_hcd *hcd) +{ + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + int ret; + + ehci->caps = hcd->regs; + + ret = ehci_setup(hcd); + if (ret) + return ret; + + ehci_port_power(ehci, 0); + + return 0; +} + +static const struct hc_driver ehci_ls1x_hc_driver = { + .description = hcd_name, + .product_desc = "LOONGSON1 EHCI", + .hcd_priv_size = sizeof(struct ehci_hcd), + + /* + * generic hardware linkage + */ + .irq = ehci_irq, + .flags = HCD_MEMORY | HCD_USB2, + + /* + * basic lifecycle operations + */ + .reset = ehci_ls1x_reset, + .start = ehci_run, + .stop = ehci_stop, + .shutdown = ehci_shutdown, + + /* + * managing i/o requests and associated device resources + */ + .urb_enqueue = ehci_urb_enqueue, + .urb_dequeue = ehci_urb_dequeue, + .endpoint_disable = ehci_endpoint_disable, + .endpoint_reset = ehci_endpoint_reset, + + /* + * scheduling support + */ + .get_frame_number = ehci_get_frame, + + /* + * root hub support + */ + .hub_status_data = ehci_hub_status_data, + .hub_control = ehci_hub_control, + .relinquish_port = ehci_relinquish_port, + .port_handed_over = ehci_port_handed_over, + + .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, +}; + +static int ehci_hcd_ls1x_probe(struct platform_device *pdev) +{ + struct usb_hcd *hcd; + struct resource *res; + int irq; + int ret; + + pr_debug("initializing loongson1 ehci USB Controller\n"); + + if (usb_disabled()) + return -ENODEV; + + res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (!res) { + dev_err(&pdev->dev, + "Found HC with no IRQ. Check %s setup!\n", + dev_name(&pdev->dev)); + return -ENODEV; + } + irq = res->start; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, + "Found HC with no register addr. Check %s setup!\n", + dev_name(&pdev->dev)); + return -ENODEV; + } + + hcd = usb_create_hcd(&ehci_ls1x_hc_driver, &pdev->dev, + dev_name(&pdev->dev)); + if (!hcd) + return -ENOMEM; + hcd->rsrc_start = res->start; + hcd->rsrc_len = resource_size(res); + + if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { + dev_dbg(&pdev->dev, "controller already in use\n"); + ret = -EBUSY; + goto err_put_hcd; + } + + hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); + if (hcd->regs == NULL) { + dev_dbg(&pdev->dev, "error mapping memory\n"); + ret = -EFAULT; + goto err_release_region; + } + + ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED); + if (ret) + goto err_iounmap; + + return ret; + +err_iounmap: + iounmap(hcd->regs); +err_release_region: + release_mem_region(hcd->rsrc_start, hcd->rsrc_len); +err_put_hcd: + usb_put_hcd(hcd); + return ret; +} + +static int ehci_hcd_ls1x_remove(struct platform_device *pdev) +{ + struct usb_hcd *hcd = platform_get_drvdata(pdev); + + usb_remove_hcd(hcd); + iounmap(hcd->regs); + release_mem_region(hcd->rsrc_start, hcd->rsrc_len); + usb_put_hcd(hcd); + + return 0; +} + +static struct platform_driver ehci_ls1x_driver = { + .probe = ehci_hcd_ls1x_probe, + .remove = ehci_hcd_ls1x_remove, + .shutdown = usb_hcd_platform_shutdown, + .driver = { + .name = "ls1x-ehci", + .owner = THIS_MODULE, + }, +}; + +MODULE_ALIAS(PLATFORM_MODULE_PREFIX "ls1x-ehci"); diff --git a/drivers/usb/host/imx21-dbg.c b/drivers/usb/host/imx21-dbg.c index 6d7533427163..ec98ecee3517 100644 --- a/drivers/usb/host/imx21-dbg.c +++ b/drivers/usb/host/imx21-dbg.c @@ -239,7 +239,7 @@ static int debug_status_show(struct seq_file *s, void *v) "ETDs allocated: %d/%d (max=%d)\n" "ETDs in use sw: %d\n" "ETDs in use hw: %d\n" - "DMEM alocated: %d/%d (max=%d)\n" + "DMEM allocated: %d/%d (max=%d)\n" "DMEM blocks: %d\n" "Queued waiting for ETD: %d\n" "Queued waiting for DMEM: %d\n", diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c index 6b5eb1017e2c..e37dea87bb56 100644 --- a/drivers/usb/host/uhci-hcd.c +++ b/drivers/usb/host/uhci-hcd.c @@ -565,6 +565,9 @@ static int uhci_start(struct usb_hcd *hcd) struct dentry __maybe_unused *dentry; hcd->uses_new_polling = 1; + /* Accept arbitrarily long scatter-gather lists */ + if (!(hcd->driver->flags & HCD_LOCAL_MEM)) + hcd->self.sg_tablesize = ~0; spin_lock_init(&uhci->lock); setup_timer(&uhci->fsbr_timer, uhci_fsbr_timeout, diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index 557b6f32db86..673ad120c43e 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -422,6 +422,32 @@ void xhci_set_link_state(struct xhci_hcd *xhci, __le32 __iomem **port_array, xhci_writel(xhci, temp, port_array[port_id]); } +void xhci_set_remote_wake_mask(struct xhci_hcd *xhci, + __le32 __iomem **port_array, int port_id, u16 wake_mask) +{ + u32 temp; + + temp = xhci_readl(xhci, port_array[port_id]); + temp = xhci_port_state_to_neutral(temp); + + if (wake_mask & USB_PORT_FEAT_REMOTE_WAKE_CONNECT) + temp |= PORT_WKCONN_E; + else + temp &= ~PORT_WKCONN_E; + + if (wake_mask & USB_PORT_FEAT_REMOTE_WAKE_DISCONNECT) + temp |= PORT_WKDISC_E; + else + temp &= ~PORT_WKDISC_E; + + if (wake_mask & USB_PORT_FEAT_REMOTE_WAKE_OVER_CURRENT) + temp |= PORT_WKOC_E; + else + temp &= ~PORT_WKOC_E; + + xhci_writel(xhci, temp, port_array[port_id]); +} + /* Test and clear port RWC bit */ void xhci_test_and_clear_bit(struct xhci_hcd *xhci, __le32 __iomem **port_array, int port_id, u32 port_bit) @@ -448,6 +474,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, int slot_id; struct xhci_bus_state *bus_state; u16 link_state = 0; + u16 wake_mask = 0; max_ports = xhci_get_ports(hcd, &port_array); bus_state = &xhci->bus_state[hcd_index(hcd)]; @@ -593,6 +620,8 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, case SetPortFeature: if (wValue == USB_PORT_FEAT_LINK_STATE) link_state = (wIndex & 0xff00) >> 3; + if (wValue == USB_PORT_FEAT_REMOTE_WAKE_MASK) + wake_mask = wIndex & 0xff00; wIndex &= 0xff; if (!wIndex || wIndex > max_ports) goto error; @@ -703,6 +732,14 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, temp = xhci_readl(xhci, port_array[wIndex]); xhci_dbg(xhci, "set port reset, actual port %d status = 0x%x\n", wIndex, temp); break; + case USB_PORT_FEAT_REMOTE_WAKE_MASK: + xhci_set_remote_wake_mask(xhci, port_array, + wIndex, wake_mask); + temp = xhci_readl(xhci, port_array[wIndex]); + xhci_dbg(xhci, "set port remote wake mask, " + "actual port %d status = 0x%x\n", + wIndex, temp); + break; case USB_PORT_FEAT_BH_PORT_RESET: temp |= PORT_WR; xhci_writel(xhci, temp, port_array[wIndex]); @@ -883,6 +920,10 @@ int xhci_bus_suspend(struct usb_hcd *hcd) t2 |= PORT_LINK_STROBE | XDEV_U3; set_bit(port_index, &bus_state->bus_suspended); } + /* USB core sets remote wake mask for USB 3.0 hubs, + * including the USB 3.0 roothub, but only if CONFIG_USB_SUSPEND + * is enabled, so also enable remote wake here. + */ if (hcd->self.root_hub->do_remote_wakeup) { if (t1 & PORT_CONNECT) { t2 |= PORT_WKOC_E | PORT_WKDISC_E; diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index 383fc857491c..8339d826ce58 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -2157,7 +2157,7 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) unsigned int val, val2; u64 val_64; struct xhci_segment *seg; - u32 page_size; + u32 page_size, temp; int i; page_size = xhci_readl(xhci, &xhci->op_regs->page_size); @@ -2340,6 +2340,15 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) INIT_LIST_HEAD(&xhci->lpm_failed_devs); + /* Enable USB 3.0 device notifications for function remote wake, which + * is necessary for allowing USB 3.0 devices to do remote wakeup from + * U3 (device suspend). + */ + temp = xhci_readl(xhci, &xhci->op_regs->dev_notification); + temp &= ~DEV_NOTE_MASK; + temp |= DEV_NOTE_FWAKE; + xhci_writel(xhci, temp, &xhci->op_regs->dev_notification); + return 0; fail: diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index b62037bff688..3a033240ec64 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -1237,6 +1237,26 @@ static unsigned int find_faked_portnum_from_hw_portnum(struct usb_hcd *hcd, return num_similar_speed_ports; } +static void handle_device_notification(struct xhci_hcd *xhci, + union xhci_trb *event) +{ + u32 slot_id; + struct usb_device *udev; + + slot_id = TRB_TO_SLOT_ID(event->generic.field[3]); + if (!xhci->devs[slot_id]) { + xhci_warn(xhci, "Device Notification event for " + "unused slot %u\n", slot_id); + return; + } + + xhci_dbg(xhci, "Device Wake Notification event for slot ID %u\n", + slot_id); + udev = xhci->devs[slot_id]->udev; + if (udev && udev->parent) + usb_wakeup_notification(udev->parent, udev->portnum); +} + static void handle_port_status(struct xhci_hcd *xhci, union xhci_trb *event) { @@ -1321,20 +1341,21 @@ static void handle_port_status(struct xhci_hcd *xhci, } if (DEV_SUPERSPEED(temp)) { - xhci_dbg(xhci, "resume SS port %d\n", port_id); + xhci_dbg(xhci, "remote wake SS port %d\n", port_id); + /* Set a flag to say the port signaled remote wakeup, + * so we can tell the difference between the end of + * device and host initiated resume. + */ + bus_state->port_remote_wakeup |= 1 << faked_port_index; + xhci_test_and_clear_bit(xhci, port_array, + faked_port_index, PORT_PLC); xhci_set_link_state(xhci, port_array, faked_port_index, XDEV_U0); - slot_id = xhci_find_slot_id_by_port(hcd, xhci, - faked_port_index + 1); - if (!slot_id) { - xhci_dbg(xhci, "slot_id is zero\n"); - goto cleanup; - } - xhci_ring_device(xhci, slot_id); - xhci_dbg(xhci, "resume SS port %d finished\n", port_id); - /* Clear PORT_PLC */ - xhci_test_and_clear_bit(xhci, port_array, - faked_port_index, PORT_PLC); + /* Need to wait until the next link state change + * indicates the device is actually in U0. + */ + bogus_port_status = true; + goto cleanup; } else { xhci_dbg(xhci, "resume HS port %d\n", port_id); bus_state->resume_done[faked_port_index] = jiffies + @@ -1345,6 +1366,32 @@ static void handle_port_status(struct xhci_hcd *xhci, } } + if ((temp & PORT_PLC) && (temp & PORT_PLS_MASK) == XDEV_U0 && + DEV_SUPERSPEED(temp)) { + xhci_dbg(xhci, "resume SS port %d finished\n", port_id); + /* We've just brought the device into U0 through either the + * Resume state after a device remote wakeup, or through the + * U3Exit state after a host-initiated resume. If it's a device + * initiated remote wake, don't pass up the link state change, + * so the roothub behavior is consistent with external + * USB 3.0 hub behavior. + */ + slot_id = xhci_find_slot_id_by_port(hcd, xhci, + faked_port_index + 1); + if (slot_id && xhci->devs[slot_id]) + xhci_ring_device(xhci, slot_id); + if (bus_state->port_remote_wakeup && (1 << faked_port_index)) { + bus_state->port_remote_wakeup &= + ~(1 << faked_port_index); + xhci_test_and_clear_bit(xhci, port_array, + faked_port_index, PORT_PLC); + usb_wakeup_notification(hcd->self.root_hub, + faked_port_index + 1); + bogus_port_status = true; + goto cleanup; + } + } + if (hcd->speed != HCD_USB3) xhci_test_and_clear_bit(xhci, port_array, faked_port_index, PORT_PLC); @@ -2277,6 +2324,9 @@ static int xhci_handle_event(struct xhci_hcd *xhci) else update_ptrs = 0; break; + case TRB_TYPE(TRB_DEV_NOTE): + handle_device_notification(xhci, event); + break; default: if ((le32_to_cpu(event->event_cmd.flags) & TRB_TYPE_BITMASK) >= TRB_TYPE(48)) diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index fb99c8379142..0f4936956103 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1344,6 +1344,7 @@ struct xhci_bus_state { /* ports suspend status arrays - max 31 ports for USB2, 15 for USB3 */ u32 port_c_suspend; u32 suspended_ports; + u32 port_remote_wakeup; unsigned long resume_done[USB_MAXCHILDREN]; }; diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index 08a5575724cd..ec9dc4e9a3ff 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -286,7 +286,7 @@ static int cp210x_get_config(struct usb_serial_port *port, u8 request, if (result != size) { dbg("%s - Unable to send config request, " - "request=0x%x size=%d result=%d\n", + "request=0x%x size=%d result=%d", __func__, request, size, result); if (result > 0) result = -EPROTO; @@ -340,7 +340,7 @@ static int cp210x_set_config(struct usb_serial_port *port, u8 request, if ((size > 2 && result != size) || result < 0) { dbg("%s - Unable to send request, " - "request=0x%x size=%d result=%d\n", + "request=0x%x size=%d result=%d", __func__, request, size, result); if (result > 0) result = -EPROTO; @@ -683,13 +683,13 @@ static void cp210x_set_termios(struct tty_struct *tty, default: dbg("cp210x driver does not " "support the number of bits requested," - " using 8 bit mode\n"); + " using 8 bit mode"); bits |= BITS_DATA_8; break; } if (cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2)) dbg("Number of data bits requested " - "not supported by device\n"); + "not supported by device"); } if ((cflag & (PARENB|PARODD|CMSPAR)) != @@ -716,8 +716,7 @@ static void cp210x_set_termios(struct tty_struct *tty, } } if (cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2)) - dbg("Parity mode not supported " - "by device\n"); + dbg("Parity mode not supported by device"); } if ((cflag & CSTOPB) != (old_cflag & CSTOPB)) { @@ -732,7 +731,7 @@ static void cp210x_set_termios(struct tty_struct *tty, } if (cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2)) dbg("Number of stop bits requested " - "not supported by device\n"); + "not supported by device"); } if ((cflag & CRTSCTS) != (old_cflag & CRTSCTS)) { diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c index 3bdeafa29c24..5ae86b349cad 100644 --- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c @@ -800,7 +800,7 @@ send: cypress_write_int_callback, port, priv->write_urb_interval); result = usb_submit_urb(port->interrupt_out_urb, GFP_ATOMIC); if (result) { - dev_err(&port->dev, + dev_err_console(port, "%s - failed submitting write urb, error %d\n", __func__, result); priv->write_urb_in_use = 0; diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c index b23bebd721a1..2b1da0cc071a 100644 --- a/drivers/usb/serial/digi_acceleport.c +++ b/drivers/usb/serial/digi_acceleport.c @@ -995,7 +995,7 @@ static int digi_write(struct tty_struct *tty, struct usb_serial_port *port, /* return length of new data written, or error */ spin_unlock_irqrestore(&priv->dp_port_lock, flags); if (ret < 0) - dev_err(&port->dev, + dev_err_console(port, "%s: usb_submit_urb failed, ret=%d, port=%d\n", __func__, ret, priv->dp_port_num); dbg("digi_write: returning %d", ret); @@ -1065,7 +1065,7 @@ static void digi_write_bulk_callback(struct urb *urb) spin_unlock(&priv->dp_port_lock); if (ret && ret != -EPERM) - dev_err(&port->dev, + dev_err_console(port, "%s: usb_submit_urb failed, ret=%d, port=%d\n", __func__, ret, priv->dp_port_num); } diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c index f7403576f99f..2a2fa2d0489d 100644 --- a/drivers/usb/serial/generic.c +++ b/drivers/usb/serial/generic.c @@ -217,7 +217,7 @@ retry: clear_bit(i, &port->write_urbs_free); result = usb_submit_urb(urb, GFP_ATOMIC); if (result) { - dev_err(&port->dev, "%s - error submitting urb: %d\n", + dev_err_console(port, "%s - error submitting urb: %d\n", __func__, result); set_bit(i, &port->write_urbs_free); spin_lock_irqsave(&port->lock, flags); diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c index 0497575e4799..616b07862771 100644 --- a/drivers/usb/serial/io_edgeport.c +++ b/drivers/usb/serial/io_edgeport.c @@ -1286,7 +1286,7 @@ static void send_more_port_data(struct edgeport_serial *edge_serial, count = fifo->count; buffer = kmalloc(count+2, GFP_ATOMIC); if (buffer == NULL) { - dev_err(&edge_port->port->dev, + dev_err_console(edge_port->port, "%s - no more kernel memory...\n", __func__); edge_port->write_in_progress = false; goto exit_send; @@ -1331,7 +1331,7 @@ static void send_more_port_data(struct edgeport_serial *edge_serial, status = usb_submit_urb(urb, GFP_ATOMIC); if (status) { /* something went wrong */ - dev_err(&edge_port->port->dev, + dev_err_console(edge_port->port, "%s - usb_submit_urb(write bulk) failed, status = %d, data lost\n", __func__, status); edge_port->write_in_progress = false; diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c index 5818bfc3261e..58a3697246a8 100644 --- a/drivers/usb/serial/io_ti.c +++ b/drivers/usb/serial/io_ti.c @@ -1817,7 +1817,7 @@ static void edge_bulk_out_callback(struct urb *urb) __func__, status); return; default: - dev_err(&urb->dev->dev, "%s - nonzero write bulk status " + dev_err_console(port, "%s - nonzero write bulk status " "received: %d\n", __func__, status); } @@ -2111,7 +2111,7 @@ static void edge_send(struct tty_struct *tty) /* send the data out the bulk port */ result = usb_submit_urb(port->write_urb, GFP_ATOMIC); if (result) { - dev_err(&port->dev, + dev_err_console(port, "%s - failed submitting write urb, error %d\n", __func__, result); edge_port->ep_write_urb_in_use = 0; diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c index 4554ee49e635..4fb29b4aaad6 100644 --- a/drivers/usb/serial/mos7720.c +++ b/drivers/usb/serial/mos7720.c @@ -1294,7 +1294,7 @@ static int mos7720_write(struct tty_struct *tty, struct usb_serial_port *port, urb->transfer_buffer = kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_KERNEL); if (urb->transfer_buffer == NULL) { - dev_err(&port->dev, "%s no more kernel memory...\n", + dev_err_console(port, "%s no more kernel memory...\n", __func__); goto exit; } @@ -1315,7 +1315,7 @@ static int mos7720_write(struct tty_struct *tty, struct usb_serial_port *port, /* send it down the pipe */ status = usb_submit_urb(urb, GFP_ATOMIC); if (status) { - dev_err(&port->dev, "%s - usb_submit_urb(write bulk) failed " + dev_err_console(port, "%s - usb_submit_urb(write bulk) failed " "with status = %d\n", __func__, status); bytes_sent = status; goto exit; diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index 03b5e249e95e..19b11cece6ba 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -1509,7 +1509,7 @@ static int mos7840_write(struct tty_struct *tty, struct usb_serial_port *port, kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_KERNEL); if (urb->transfer_buffer == NULL) { - dev_err(&port->dev, "%s no more kernel memory...\n", + dev_err_console(port, "%s no more kernel memory...\n", __func__); goto exit; } @@ -1535,7 +1535,7 @@ static int mos7840_write(struct tty_struct *tty, struct usb_serial_port *port, if (status) { mos7840_port->busy[i] = 0; - dev_err(&port->dev, "%s - usb_submit_urb(write bulk) failed " + dev_err_console(port, "%s - usb_submit_urb(write bulk) failed " "with status = %d\n", __func__, status); bytes_sent = status; goto exit; diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c index 8b8d58a2ac12..033e8afa6c77 100644 --- a/drivers/usb/serial/omninet.c +++ b/drivers/usb/serial/omninet.c @@ -254,7 +254,7 @@ static int omninet_write(struct tty_struct *tty, struct usb_serial_port *port, result = usb_submit_urb(wport->write_urb, GFP_ATOMIC); if (result) { set_bit(0, &wport->write_urbs_free); - dev_err(&port->dev, + dev_err_console(port, "%s - failed submitting write urb, error %d\n", __func__, result); } else diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c index e287fd32682c..343e626a06f8 100644 --- a/drivers/usb/serial/oti6858.c +++ b/drivers/usb/serial/oti6858.c @@ -302,7 +302,7 @@ static void send_data(struct work_struct *work) if (count != 0) { allow = kmalloc(1, GFP_KERNEL); if (!allow) { - dev_err(&port->dev, "%s(): kmalloc failed\n", + dev_err_console(port, "%s(): kmalloc failed\n", __func__); return; } @@ -334,7 +334,7 @@ static void send_data(struct work_struct *work) port->write_urb->transfer_buffer_length = count; result = usb_submit_urb(port->write_urb, GFP_NOIO); if (result != 0) { - dev_err(&port->dev, "%s(): usb_submit_urb() failed" + dev_err_console(port, "%s(): usb_submit_urb() failed" " with error %d\n", __func__, result); priv->flags.write_urb_in_use = 0; } @@ -938,7 +938,7 @@ static void oti6858_write_bulk_callback(struct urb *urb) port->write_urb->transfer_buffer_length = 1; result = usb_submit_urb(port->write_urb, GFP_ATOMIC); if (result) { - dev_err(&port->dev, "%s(): usb_submit_urb() failed," + dev_err_console(port, "%s(): usb_submit_urb() failed," " error %d\n", __func__, result); } else { return; diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index 75b838eff178..74f2c7746cc4 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -1250,7 +1250,6 @@ static void ti_bulk_out_callback(struct urb *urb) { struct ti_port *tport = urb->context; struct usb_serial_port *port = tport->tp_port; - struct device *dev = &urb->dev->dev; int status = urb->status; dbg("%s - port %d", __func__, port->number); @@ -1268,7 +1267,7 @@ static void ti_bulk_out_callback(struct urb *urb) wake_up_interruptible(&tport->tp_write_wait); return; default: - dev_err(dev, "%s - nonzero urb status, %d\n", + dev_err_console(port, "%s - nonzero urb status, %d\n", __func__, status); tport->tp_tdev->td_urb_error = 1; wake_up_interruptible(&tport->tp_write_wait); @@ -1337,7 +1336,7 @@ static void ti_send(struct ti_port *tport) result = usb_submit_urb(port->write_urb, GFP_ATOMIC); if (result) { - dev_err(&port->dev, "%s - submit write urb failed, %d\n", + dev_err_console(port, "%s - submit write urb failed, %d\n", __func__, result); tport->tp_write_urb_in_use = 0; /* TODO: reschedule ti_send */ diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c index 7e0acf5c8e38..007cf3a2481a 100644 --- a/drivers/usb/serial/whiteheat.c +++ b/drivers/usb/serial/whiteheat.c @@ -740,7 +740,7 @@ static int whiteheat_write(struct tty_struct *tty, urb->transfer_buffer_length = bytes; result = usb_submit_urb(urb, GFP_ATOMIC); if (result) { - dev_err(&port->dev, + dev_err_console(port, "%s - failed submitting write urb, error %d\n", __func__, result); sent = result; diff --git a/drivers/usb/storage/alauda.c b/drivers/usb/storage/alauda.c index 51af2fee2efd..bab8c8fe8290 100644 --- a/drivers/usb/storage/alauda.c +++ b/drivers/usb/storage/alauda.c @@ -1276,6 +1276,7 @@ static struct usb_driver alauda_driver = { .post_reset = usb_stor_post_reset, .id_table = alauda_usb_ids, .soft_unbind = 1, + .no_dynamic_id = 1, }; module_usb_driver(alauda_driver); diff --git a/drivers/usb/storage/cypress_atacb.c b/drivers/usb/storage/cypress_atacb.c index 387cbd47acc9..5fe451d16e68 100644 --- a/drivers/usb/storage/cypress_atacb.c +++ b/drivers/usb/storage/cypress_atacb.c @@ -272,6 +272,7 @@ static struct usb_driver cypress_driver = { .post_reset = usb_stor_post_reset, .id_table = cypress_usb_ids, .soft_unbind = 1, + .no_dynamic_id = 1, }; module_usb_driver(cypress_driver); diff --git a/drivers/usb/storage/datafab.c b/drivers/usb/storage/datafab.c index 15d41f2b3d6f..35e9c51e6696 100644 --- a/drivers/usb/storage/datafab.c +++ b/drivers/usb/storage/datafab.c @@ -751,6 +751,7 @@ static struct usb_driver datafab_driver = { .post_reset = usb_stor_post_reset, .id_table = datafab_usb_ids, .soft_unbind = 1, + .no_dynamic_id = 1, }; module_usb_driver(datafab_driver); diff --git a/drivers/usb/storage/ene_ub6250.c b/drivers/usb/storage/ene_ub6250.c index a6ade4071a9a..30532d93eecc 100644 --- a/drivers/usb/storage/ene_ub6250.c +++ b/drivers/usb/storage/ene_ub6250.c @@ -2407,6 +2407,7 @@ static struct usb_driver ene_ub6250_driver = { .post_reset = usb_stor_post_reset, .id_table = ene_ub6250_usb_ids, .soft_unbind = 1, + .no_dynamic_id = 1, }; module_usb_driver(ene_ub6250_driver); diff --git a/drivers/usb/storage/freecom.c b/drivers/usb/storage/freecom.c index fa1615748475..042cf9ef3153 100644 --- a/drivers/usb/storage/freecom.c +++ b/drivers/usb/storage/freecom.c @@ -553,6 +553,7 @@ static struct usb_driver freecom_driver = { .post_reset = usb_stor_post_reset, .id_table = freecom_usb_ids, .soft_unbind = 1, + .no_dynamic_id = 1, }; module_usb_driver(freecom_driver); diff --git a/drivers/usb/storage/isd200.c b/drivers/usb/storage/isd200.c index bd5502700831..31fa24e7e68a 100644 --- a/drivers/usb/storage/isd200.c +++ b/drivers/usb/storage/isd200.c @@ -1566,6 +1566,7 @@ static struct usb_driver isd200_driver = { .post_reset = usb_stor_post_reset, .id_table = isd200_usb_ids, .soft_unbind = 1, + .no_dynamic_id = 1, }; module_usb_driver(isd200_driver); diff --git a/drivers/usb/storage/jumpshot.c b/drivers/usb/storage/jumpshot.c index a19211b5c265..e3b97383186a 100644 --- a/drivers/usb/storage/jumpshot.c +++ b/drivers/usb/storage/jumpshot.c @@ -677,6 +677,7 @@ static struct usb_driver jumpshot_driver = { .post_reset = usb_stor_post_reset, .id_table = jumpshot_usb_ids, .soft_unbind = 1, + .no_dynamic_id = 1, }; module_usb_driver(jumpshot_driver); diff --git a/drivers/usb/storage/karma.c b/drivers/usb/storage/karma.c index e720f8ebdf9f..a8708eae9788 100644 --- a/drivers/usb/storage/karma.c +++ b/drivers/usb/storage/karma.c @@ -230,6 +230,7 @@ static struct usb_driver karma_driver = { .post_reset = usb_stor_post_reset, .id_table = karma_usb_ids, .soft_unbind = 1, + .no_dynamic_id = 1, }; module_usb_driver(karma_driver); diff --git a/drivers/usb/storage/onetouch.c b/drivers/usb/storage/onetouch.c index d75155c38200..886567a3806d 100644 --- a/drivers/usb/storage/onetouch.c +++ b/drivers/usb/storage/onetouch.c @@ -312,6 +312,7 @@ static struct usb_driver onetouch_driver = { .post_reset = usb_stor_post_reset, .id_table = onetouch_usb_ids, .soft_unbind = 1, + .no_dynamic_id = 1, }; module_usb_driver(onetouch_driver); diff --git a/drivers/usb/storage/realtek_cr.c b/drivers/usb/storage/realtek_cr.c index d32f72061c09..b1c2fe8b6dcd 100644 --- a/drivers/usb/storage/realtek_cr.c +++ b/drivers/usb/storage/realtek_cr.c @@ -1100,6 +1100,7 @@ static struct usb_driver realtek_cr_driver = { .id_table = realtek_cr_ids, .soft_unbind = 1, .supports_autosuspend = 1, + .no_dynamic_id = 1, }; module_usb_driver(realtek_cr_driver); diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c index 13b8bcdf3dba..a324a5d21e99 100644 --- a/drivers/usb/storage/scsiglue.c +++ b/drivers/usb/storage/scsiglue.c @@ -78,8 +78,6 @@ static const char* host_info(struct Scsi_Host *host) static int slave_alloc (struct scsi_device *sdev) { - struct us_data *us = host_to_us(sdev->host); - /* * Set the INQUIRY transfer length to 36. We don't use any of * the extra data and many devices choke if asked for more or @@ -104,18 +102,6 @@ static int slave_alloc (struct scsi_device *sdev) */ blk_queue_update_dma_alignment(sdev->request_queue, (512 - 1)); - /* - * The UFI spec treates the Peripheral Qualifier bits in an - * INQUIRY result as reserved and requires devices to set them - * to 0. However the SCSI spec requires these bits to be set - * to 3 to indicate when a LUN is not present. - * - * Let the scanning code know if this target merely sets - * Peripheral Device Type to 0x1f to indicate no LUN. - */ - if (us->subclass == USB_SC_UFI) - sdev->sdev_target->pdt_1f_for_no_lun = 1; - return 0; } @@ -197,6 +183,9 @@ static int slave_configure(struct scsi_device *sdev) * page x08, so we will skip it. */ sdev->skip_ms_page_8 = 1; + /* Some devices don't handle VPD pages correctly */ + sdev->skip_vpd_pages = 1; + /* Some disks return the total number of blocks in response * to READ CAPACITY rather than the highest block number. * If this device makes that mistake, tell the sd driver. */ @@ -217,16 +206,6 @@ static int slave_configure(struct scsi_device *sdev) if (sdev->scsi_level > SCSI_SPC_2) us->fflags |= US_FL_SANE_SENSE; - /* Some devices report a SCSI revision level above 2 but are - * unable to handle the REPORT LUNS command (for which - * support is mandatory at level 3). Since we already have - * a Get-Max-LUN request, we won't lose much by setting the - * revision level down to 2. The only devices that would be - * affected are those with sparse LUNs. */ - if (sdev->scsi_level > SCSI_2) - sdev->sdev_target->scsi_level = - sdev->scsi_level = SCSI_2; - /* USB-IDE bridges tend to report SK = 0x04 (Non-recoverable * Hardware Error) when any low-level error occurs, * recoverable or not. Setting this flag tells the SCSI @@ -283,6 +262,33 @@ static int slave_configure(struct scsi_device *sdev) return 0; } +static int target_alloc(struct scsi_target *starget) +{ + struct us_data *us = host_to_us(dev_to_shost(starget->dev.parent)); + + /* + * Some USB drives don't support REPORT LUNS, even though they + * report a SCSI revision level above 2. Tell the SCSI layer + * not to issue that command; it will perform a normal sequential + * scan instead. + */ + starget->no_report_luns = 1; + + /* + * The UFI spec treats the Peripheral Qualifier bits in an + * INQUIRY result as reserved and requires devices to set them + * to 0. However the SCSI spec requires these bits to be set + * to 3 to indicate when a LUN is not present. + * + * Let the scanning code know if this target merely sets + * Peripheral Device Type to 0x1f to indicate no LUN. + */ + if (us->subclass == USB_SC_UFI) + starget->pdt_1f_for_no_lun = 1; + + return 0; +} + /* queue a command */ /* This is always called with scsi_lock(host) held */ static int queuecommand_lck(struct scsi_cmnd *srb, @@ -546,6 +552,7 @@ struct scsi_host_template usb_stor_host_template = { .slave_alloc = slave_alloc, .slave_configure = slave_configure, + .target_alloc = target_alloc, /* lots of sg segments can be handled */ .sg_tablesize = SCSI_MAX_SG_CHAIN_SEGMENTS, diff --git a/drivers/usb/storage/sddr09.c b/drivers/usb/storage/sddr09.c index 425df7df2e56..3252a62b31bc 100644 --- a/drivers/usb/storage/sddr09.c +++ b/drivers/usb/storage/sddr09.c @@ -1787,6 +1787,7 @@ static struct usb_driver sddr09_driver = { .post_reset = usb_stor_post_reset, .id_table = sddr09_usb_ids, .soft_unbind = 1, + .no_dynamic_id = 1, }; module_usb_driver(sddr09_driver); diff --git a/drivers/usb/storage/sddr55.c b/drivers/usb/storage/sddr55.c index e4ca5fcb7cc3..c144078065a7 100644 --- a/drivers/usb/storage/sddr55.c +++ b/drivers/usb/storage/sddr55.c @@ -1006,6 +1006,7 @@ static struct usb_driver sddr55_driver = { .post_reset = usb_stor_post_reset, .id_table = sddr55_usb_ids, .soft_unbind = 1, + .no_dynamic_id = 1, }; module_usb_driver(sddr55_driver); diff --git a/drivers/usb/storage/shuttle_usbat.c b/drivers/usb/storage/shuttle_usbat.c index 1369d2590616..fa1ceebc465c 100644 --- a/drivers/usb/storage/shuttle_usbat.c +++ b/drivers/usb/storage/shuttle_usbat.c @@ -1863,6 +1863,7 @@ static struct usb_driver usbat_driver = { .post_reset = usb_stor_post_reset, .id_table = usbat_usb_ids, .soft_unbind = 1, + .no_dynamic_id = 1, }; module_usb_driver(usbat_driver); diff --git a/drivers/usb/storage/uas.c b/drivers/usb/storage/uas.c index a33ead5dce20..8ec8a6e66f50 100644 --- a/drivers/usb/storage/uas.c +++ b/drivers/usb/storage/uas.c @@ -13,7 +13,9 @@ #include <linux/types.h> #include <linux/module.h> #include <linux/usb.h> +#include <linux/usb/hcd.h> #include <linux/usb/storage.h> +#include <linux/usb/uas.h> #include <scsi/scsi.h> #include <scsi/scsi_dbg.h> @@ -22,49 +24,6 @@ #include <scsi/scsi_host.h> #include <scsi/scsi_tcq.h> -/* Common header for all IUs */ -struct iu { - __u8 iu_id; - __u8 rsvd1; - __be16 tag; -}; - -enum { - IU_ID_COMMAND = 0x01, - IU_ID_STATUS = 0x03, - IU_ID_RESPONSE = 0x04, - IU_ID_TASK_MGMT = 0x05, - IU_ID_READ_READY = 0x06, - IU_ID_WRITE_READY = 0x07, -}; - -struct command_iu { - __u8 iu_id; - __u8 rsvd1; - __be16 tag; - __u8 prio_attr; - __u8 rsvd5; - __u8 len; - __u8 rsvd7; - struct scsi_lun lun; - __u8 cdb[16]; /* XXX: Overflow-checking tools may misunderstand */ -}; - -/* - * Also used for the Read Ready and Write Ready IUs since they have the - * same first four bytes - */ -struct sense_iu { - __u8 iu_id; - __u8 rsvd1; - __be16 tag; - __be16 status_qual; - __u8 status; - __u8 rsvd7[7]; - __be16 len; - __u8 sense[SCSI_SENSE_BUFFERSIZE]; -}; - /* * The r00-r01c specs define this version of the SENSE IU data structure. * It's still in use by several different firmware releases. @@ -79,18 +38,6 @@ struct sense_iu_old { __u8 sense[SCSI_SENSE_BUFFERSIZE]; }; -enum { - CMD_PIPE_ID = 1, - STATUS_PIPE_ID = 2, - DATA_IN_PIPE_ID = 3, - DATA_OUT_PIPE_ID = 4, - - UAS_SIMPLE_TAG = 0, - UAS_HEAD_TAG = 1, - UAS_ORDERED_TAG = 2, - UAS_ACA = 4, -}; - struct uas_dev_info { struct usb_interface *intf; struct usb_device *udev; @@ -98,6 +45,8 @@ struct uas_dev_info { unsigned cmd_pipe, status_pipe, data_in_pipe, data_out_pipe; unsigned use_streams:1; unsigned uas_sense_old:1; + struct scsi_cmnd *cmnd; + struct urb *status_urb; /* used only if stream support is available */ }; enum { @@ -109,6 +58,9 @@ enum { SUBMIT_DATA_OUT_URB = (1 << 5), ALLOC_CMD_URB = (1 << 6), SUBMIT_CMD_URB = (1 << 7), + COMPLETED_DATA_IN = (1 << 8), + COMPLETED_DATA_OUT = (1 << 9), + DATA_COMPLETES_CMD = (1 << 10), }; /* Overrides scsi_pointer */ @@ -116,6 +68,7 @@ struct uas_cmd_info { unsigned int state; unsigned int stream; struct urb *cmd_urb; + /* status_urb is used only if stream support isn't available */ struct urb *status_urb; struct urb *data_in_urb; struct urb *data_out_urb; @@ -125,33 +78,43 @@ struct uas_cmd_info { /* I hate forward declarations, but I actually have a loop */ static int uas_submit_urbs(struct scsi_cmnd *cmnd, struct uas_dev_info *devinfo, gfp_t gfp); +static void uas_do_work(struct work_struct *work); +static DECLARE_WORK(uas_work, uas_do_work); static DEFINE_SPINLOCK(uas_work_lock); static LIST_HEAD(uas_work_list); static void uas_do_work(struct work_struct *work) { struct uas_cmd_info *cmdinfo; + struct uas_cmd_info *temp; struct list_head list; + int err; spin_lock_irq(&uas_work_lock); list_replace_init(&uas_work_list, &list); spin_unlock_irq(&uas_work_lock); - list_for_each_entry(cmdinfo, &list, list) { + list_for_each_entry_safe(cmdinfo, temp, &list, list) { struct scsi_pointer *scp = (void *)cmdinfo; struct scsi_cmnd *cmnd = container_of(scp, struct scsi_cmnd, SCp); - uas_submit_urbs(cmnd, cmnd->device->hostdata, GFP_NOIO); + err = uas_submit_urbs(cmnd, cmnd->device->hostdata, GFP_NOIO); + if (err) { + list_del(&cmdinfo->list); + spin_lock_irq(&uas_work_lock); + list_add_tail(&cmdinfo->list, &uas_work_list); + spin_unlock_irq(&uas_work_lock); + schedule_work(&uas_work); + } } } -static DECLARE_WORK(uas_work, uas_do_work); - static void uas_sense(struct urb *urb, struct scsi_cmnd *cmnd) { struct sense_iu *sense_iu = urb->transfer_buffer; struct scsi_device *sdev = cmnd->device; + struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp; if (urb->actual_length > 16) { unsigned len = be16_to_cpup(&sense_iu->len); @@ -169,16 +132,15 @@ static void uas_sense(struct urb *urb, struct scsi_cmnd *cmnd) } cmnd->result = sense_iu->status; - if (sdev->current_cmnd) - sdev->current_cmnd = NULL; - cmnd->scsi_done(cmnd); - usb_free_urb(urb); + if (!(cmdinfo->state & DATA_COMPLETES_CMD)) + cmnd->scsi_done(cmnd); } static void uas_sense_old(struct urb *urb, struct scsi_cmnd *cmnd) { struct sense_iu_old *sense_iu = urb->transfer_buffer; struct scsi_device *sdev = cmnd->device; + struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp; if (urb->actual_length > 8) { unsigned len = be16_to_cpup(&sense_iu->len) - 2; @@ -196,10 +158,8 @@ static void uas_sense_old(struct urb *urb, struct scsi_cmnd *cmnd) } cmnd->result = sense_iu->status; - if (sdev->current_cmnd) - sdev->current_cmnd = NULL; - cmnd->scsi_done(cmnd); - usb_free_urb(urb); + if (!(cmdinfo->state & DATA_COMPLETES_CMD)) + cmnd->scsi_done(cmnd); } static void uas_xfer_data(struct urb *urb, struct scsi_cmnd *cmnd, @@ -208,7 +168,7 @@ static void uas_xfer_data(struct urb *urb, struct scsi_cmnd *cmnd, struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp; int err; - cmdinfo->state = direction | SUBMIT_STATUS_URB; + cmdinfo->state = direction; err = uas_submit_urbs(cmnd, cmnd->device->hostdata, GFP_ATOMIC); if (err) { spin_lock(&uas_work_lock); @@ -221,27 +181,61 @@ static void uas_xfer_data(struct urb *urb, struct scsi_cmnd *cmnd, static void uas_stat_cmplt(struct urb *urb) { struct iu *iu = urb->transfer_buffer; - struct scsi_device *sdev = urb->context; - struct uas_dev_info *devinfo = sdev->hostdata; + struct Scsi_Host *shost = urb->context; + struct uas_dev_info *devinfo = (void *)shost->hostdata[0]; struct scsi_cmnd *cmnd; + struct uas_cmd_info *cmdinfo; u16 tag; + int ret; if (urb->status) { dev_err(&urb->dev->dev, "URB BAD STATUS %d\n", urb->status); - usb_free_urb(urb); + if (devinfo->use_streams) + usb_free_urb(urb); return; } tag = be16_to_cpup(&iu->tag) - 1; - if (sdev->current_cmnd) - cmnd = sdev->current_cmnd; + if (tag == 0) + cmnd = devinfo->cmnd; else - cmnd = scsi_find_tag(sdev, tag); - if (!cmnd) + cmnd = scsi_host_find_tag(shost, tag - 1); + if (!cmnd) { + if (devinfo->use_streams) { + usb_free_urb(urb); + return; + } + ret = usb_submit_urb(urb, GFP_ATOMIC); + if (ret) + dev_err(&urb->dev->dev, "failed submit status urb\n"); return; + } + cmdinfo = (void *)&cmnd->SCp; switch (iu->iu_id) { case IU_ID_STATUS: + if (devinfo->cmnd == cmnd) + devinfo->cmnd = NULL; + + if (!(cmdinfo->state & COMPLETED_DATA_IN) && + cmdinfo->data_in_urb) { + if (devinfo->use_streams) { + cmdinfo->state |= DATA_COMPLETES_CMD; + usb_unlink_urb(cmdinfo->data_in_urb); + } else { + usb_free_urb(cmdinfo->data_in_urb); + } + } + if (!(cmdinfo->state & COMPLETED_DATA_OUT) && + cmdinfo->data_out_urb) { + if (devinfo->use_streams) { + cmdinfo->state |= DATA_COMPLETES_CMD; + usb_unlink_urb(cmdinfo->data_in_urb); + } else { + usb_free_urb(cmdinfo->data_out_urb); + } + } + if (urb->actual_length < 16) devinfo->uas_sense_old = 1; if (devinfo->uas_sense_old) @@ -259,29 +253,70 @@ static void uas_stat_cmplt(struct urb *urb) scmd_printk(KERN_ERR, cmnd, "Bogus IU (%d) received on status pipe\n", iu->iu_id); } + + if (devinfo->use_streams) { + usb_free_urb(urb); + return; + } + + ret = usb_submit_urb(urb, GFP_ATOMIC); + if (ret) + dev_err(&urb->dev->dev, "failed submit status urb\n"); } -static void uas_data_cmplt(struct urb *urb) +static void uas_data_out_cmplt(struct urb *urb) { - struct scsi_data_buffer *sdb = urb->context; + struct scsi_cmnd *cmnd = urb->context; + struct scsi_data_buffer *sdb = scsi_out(cmnd); + struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp; + + cmdinfo->state |= COMPLETED_DATA_OUT; + sdb->resid = sdb->length - urb->actual_length; usb_free_urb(urb); + + if (cmdinfo->state & DATA_COMPLETES_CMD) + cmnd->scsi_done(cmnd); +} + +static void uas_data_in_cmplt(struct urb *urb) +{ + struct scsi_cmnd *cmnd = urb->context; + struct scsi_data_buffer *sdb = scsi_in(cmnd); + struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp; + + cmdinfo->state |= COMPLETED_DATA_IN; + + sdb->resid = sdb->length - urb->actual_length; + usb_free_urb(urb); + + if (cmdinfo->state & DATA_COMPLETES_CMD) + cmnd->scsi_done(cmnd); } static struct urb *uas_alloc_data_urb(struct uas_dev_info *devinfo, gfp_t gfp, - unsigned int pipe, u16 stream_id, - struct scsi_data_buffer *sdb, - enum dma_data_direction dir) + unsigned int pipe, struct scsi_cmnd *cmnd, + enum dma_data_direction dir) { + struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp; struct usb_device *udev = devinfo->udev; struct urb *urb = usb_alloc_urb(0, gfp); + struct scsi_data_buffer *sdb; + usb_complete_t complete_fn; + u16 stream_id = cmdinfo->stream; if (!urb) goto out; - usb_fill_bulk_urb(urb, udev, pipe, NULL, sdb->length, uas_data_cmplt, - sdb); - if (devinfo->use_streams) - urb->stream_id = stream_id; + if (dir == DMA_FROM_DEVICE) { + sdb = scsi_in(cmnd); + complete_fn = uas_data_in_cmplt; + } else { + sdb = scsi_out(cmnd); + complete_fn = uas_data_out_cmplt; + } + usb_fill_bulk_urb(urb, udev, pipe, NULL, sdb->length, + complete_fn, cmnd); + urb->stream_id = stream_id; urb->num_sgs = udev->bus->sg_tablesize ? sdb->table.nents : 0; urb->sg = sdb->table.sgl; out: @@ -289,7 +324,7 @@ static struct urb *uas_alloc_data_urb(struct uas_dev_info *devinfo, gfp_t gfp, } static struct urb *uas_alloc_sense_urb(struct uas_dev_info *devinfo, gfp_t gfp, - struct scsi_cmnd *cmnd, u16 stream_id) + struct Scsi_Host *shost, u16 stream_id) { struct usb_device *udev = devinfo->udev; struct urb *urb = usb_alloc_urb(0, gfp); @@ -303,7 +338,7 @@ static struct urb *uas_alloc_sense_urb(struct uas_dev_info *devinfo, gfp_t gfp, goto free; usb_fill_bulk_urb(urb, udev, devinfo->status_pipe, iu, sizeof(*iu), - uas_stat_cmplt, cmnd->device); + uas_stat_cmplt, shost); urb->stream_id = stream_id; urb->transfer_flags |= URB_FREE_BUFFER; out: @@ -334,7 +369,10 @@ static struct urb *uas_alloc_cmd_urb(struct uas_dev_info *devinfo, gfp_t gfp, goto free; iu->iu_id = IU_ID_COMMAND; - iu->tag = cpu_to_be16(stream_id); + if (blk_rq_tagged(cmnd->request)) + iu->tag = cpu_to_be16(cmnd->request->tag + 2); + else + iu->tag = cpu_to_be16(1); iu->prio_attr = UAS_SIMPLE_TAG; iu->len = len; int_to_scsilun(sdev->lun, &iu->lun); @@ -362,8 +400,8 @@ static int uas_submit_urbs(struct scsi_cmnd *cmnd, struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp; if (cmdinfo->state & ALLOC_STATUS_URB) { - cmdinfo->status_urb = uas_alloc_sense_urb(devinfo, gfp, cmnd, - cmdinfo->stream); + cmdinfo->status_urb = uas_alloc_sense_urb(devinfo, gfp, + cmnd->device->host, cmdinfo->stream); if (!cmdinfo->status_urb) return SCSI_MLQUEUE_DEVICE_BUSY; cmdinfo->state &= ~ALLOC_STATUS_URB; @@ -380,8 +418,8 @@ static int uas_submit_urbs(struct scsi_cmnd *cmnd, if (cmdinfo->state & ALLOC_DATA_IN_URB) { cmdinfo->data_in_urb = uas_alloc_data_urb(devinfo, gfp, - devinfo->data_in_pipe, cmdinfo->stream, - scsi_in(cmnd), DMA_FROM_DEVICE); + devinfo->data_in_pipe, cmnd, + DMA_FROM_DEVICE); if (!cmdinfo->data_in_urb) return SCSI_MLQUEUE_DEVICE_BUSY; cmdinfo->state &= ~ALLOC_DATA_IN_URB; @@ -398,8 +436,8 @@ static int uas_submit_urbs(struct scsi_cmnd *cmnd, if (cmdinfo->state & ALLOC_DATA_OUT_URB) { cmdinfo->data_out_urb = uas_alloc_data_urb(devinfo, gfp, - devinfo->data_out_pipe, cmdinfo->stream, - scsi_out(cmnd), DMA_TO_DEVICE); + devinfo->data_out_pipe, cmnd, + DMA_TO_DEVICE); if (!cmdinfo->data_out_urb) return SCSI_MLQUEUE_DEVICE_BUSY; cmdinfo->state &= ~ALLOC_DATA_OUT_URB; @@ -444,13 +482,13 @@ static int uas_queuecommand_lck(struct scsi_cmnd *cmnd, BUILD_BUG_ON(sizeof(struct uas_cmd_info) > sizeof(struct scsi_pointer)); - if (!cmdinfo->status_urb && sdev->current_cmnd) + if (devinfo->cmnd) return SCSI_MLQUEUE_DEVICE_BUSY; if (blk_rq_tagged(cmnd->request)) { - cmdinfo->stream = cmnd->request->tag + 1; + cmdinfo->stream = cmnd->request->tag + 2; } else { - sdev->current_cmnd = cmnd; + devinfo->cmnd = cmnd; cmdinfo->stream = 1; } @@ -472,7 +510,8 @@ static int uas_queuecommand_lck(struct scsi_cmnd *cmnd, } if (!devinfo->use_streams) { - cmdinfo->state &= ~(SUBMIT_DATA_IN_URB | SUBMIT_DATA_OUT_URB); + cmdinfo->state &= ~(SUBMIT_DATA_IN_URB | SUBMIT_DATA_OUT_URB | + ALLOC_STATUS_URB | SUBMIT_STATUS_URB); cmdinfo->stream = 0; } @@ -551,7 +590,7 @@ static int uas_slave_configure(struct scsi_device *sdev) { struct uas_dev_info *devinfo = sdev->hostdata; scsi_set_tag_type(sdev, MSG_ORDERED_TAG); - scsi_activate_tcq(sdev, devinfo->qdepth - 1); + scsi_activate_tcq(sdev, devinfo->qdepth - 2); return 0; } @@ -589,22 +628,34 @@ static int uas_is_interface(struct usb_host_interface *intf) intf->desc.bInterfaceProtocol == USB_PR_UAS); } +static int uas_isnt_supported(struct usb_device *udev) +{ + struct usb_hcd *hcd = bus_to_hcd(udev->bus); + + dev_warn(&udev->dev, "The driver for the USB controller %s does not " + "support scatter-gather which is\n", + hcd->driver->description); + dev_warn(&udev->dev, "required by the UAS driver. Please try an" + "alternative USB controller if you wish to use UAS.\n"); + return -ENODEV; +} + static int uas_switch_interface(struct usb_device *udev, struct usb_interface *intf) { int i; - - if (uas_is_interface(intf->cur_altsetting)) - return 0; + int sg_supported = udev->bus->sg_tablesize != 0; for (i = 0; i < intf->num_altsetting; i++) { struct usb_host_interface *alt = &intf->altsetting[i]; - if (alt == intf->cur_altsetting) - continue; - if (uas_is_interface(alt)) + + if (uas_is_interface(alt)) { + if (!sg_supported) + return uas_isnt_supported(udev); return usb_set_interface(udev, alt->desc.bInterfaceNumber, alt->desc.bAlternateSetting); + } } return -ENODEV; @@ -619,6 +670,7 @@ static void uas_configure_endpoints(struct uas_dev_info *devinfo) unsigned i, n_endpoints = intf->cur_altsetting->desc.bNumEndpoints; devinfo->uas_sense_old = 0; + devinfo->cmnd = NULL; for (i = 0; i < n_endpoints; i++) { unsigned char *extra = endpoint[i].extra; @@ -670,6 +722,40 @@ static void uas_configure_endpoints(struct uas_dev_info *devinfo) } } +static int uas_alloc_status_urb(struct uas_dev_info *devinfo, + struct Scsi_Host *shost) +{ + if (devinfo->use_streams) { + devinfo->status_urb = NULL; + return 0; + } + + devinfo->status_urb = uas_alloc_sense_urb(devinfo, GFP_KERNEL, + shost, 0); + if (!devinfo->status_urb) + goto err_s_urb; + + if (usb_submit_urb(devinfo->status_urb, GFP_KERNEL)) + goto err_submit_urb; + + return 0; +err_submit_urb: + usb_free_urb(devinfo->status_urb); +err_s_urb: + return -ENOMEM; +} + +static void uas_free_streams(struct uas_dev_info *devinfo) +{ + struct usb_device *udev = devinfo->udev; + struct usb_host_endpoint *eps[3]; + + eps[0] = usb_pipe_endpoint(udev, devinfo->status_pipe); + eps[1] = usb_pipe_endpoint(udev, devinfo->data_in_pipe); + eps[2] = usb_pipe_endpoint(udev, devinfo->data_out_pipe); + usb_free_streams(devinfo->intf, eps, 3, GFP_KERNEL); +} + /* * XXX: What I'd like to do here is register a SCSI host for each USB host in * the system. Follow usb-storage's design of registering a SCSI host for @@ -699,18 +785,33 @@ static int uas_probe(struct usb_interface *intf, const struct usb_device_id *id) shost->max_id = 1; shost->sg_tablesize = udev->bus->sg_tablesize; - result = scsi_add_host(shost, &intf->dev); + devinfo->intf = intf; + devinfo->udev = udev; + uas_configure_endpoints(devinfo); + + result = scsi_init_shared_tag_map(shost, devinfo->qdepth - 2); if (result) goto free; + + result = scsi_add_host(shost, &intf->dev); + if (result) + goto deconfig_eps; + shost->hostdata[0] = (unsigned long)devinfo; - devinfo->intf = intf; - devinfo->udev = udev; - uas_configure_endpoints(devinfo); + result = uas_alloc_status_urb(devinfo, shost); + if (result) + goto err_alloc_status; scsi_scan_host(shost); usb_set_intfdata(intf, shost); return result; + +err_alloc_status: + scsi_remove_host(shost); + shost = NULL; +deconfig_eps: + uas_free_streams(devinfo); free: kfree(devinfo); if (shost) @@ -732,18 +833,13 @@ static int uas_post_reset(struct usb_interface *intf) static void uas_disconnect(struct usb_interface *intf) { - struct usb_device *udev = interface_to_usbdev(intf); - struct usb_host_endpoint *eps[3]; struct Scsi_Host *shost = usb_get_intfdata(intf); struct uas_dev_info *devinfo = (void *)shost->hostdata[0]; scsi_remove_host(shost); - - eps[0] = usb_pipe_endpoint(udev, devinfo->status_pipe); - eps[1] = usb_pipe_endpoint(udev, devinfo->data_in_pipe); - eps[2] = usb_pipe_endpoint(udev, devinfo->data_out_pipe); - usb_free_streams(intf, eps, 3, GFP_KERNEL); - + usb_kill_urb(devinfo->status_urb); + usb_free_urb(devinfo->status_urb); + uas_free_streams(devinfo); kfree(devinfo); } diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c index db51ba16dc07..c18538e4a6db 100644 --- a/drivers/usb/storage/usb.c +++ b/drivers/usb/storage/usb.c @@ -125,6 +125,9 @@ static struct us_unusual_dev us_unusual_dev_list[] = { { } /* Terminating entry */ }; +static struct us_unusual_dev for_dynamic_ids = + USUAL_DEV(USB_SC_SCSI, USB_PR_BULK, 0); + #undef UNUSUAL_DEV #undef COMPLIANT_DEV #undef USUAL_DEV @@ -999,8 +1002,10 @@ EXPORT_SYMBOL_GPL(usb_stor_disconnect); static int storage_probe(struct usb_interface *intf, const struct usb_device_id *id) { + struct us_unusual_dev *unusual_dev; struct us_data *us; int result; + int size; /* * If libusual is configured, let it decide whether a standard @@ -1019,8 +1024,19 @@ static int storage_probe(struct usb_interface *intf, * table, so we use the index of the id entry to find the * corresponding unusual_devs entry. */ - result = usb_stor_probe1(&us, intf, id, - (id - usb_storage_usb_ids) + us_unusual_dev_list); + + size = ARRAY_SIZE(us_unusual_dev_list); + if (id >= usb_storage_usb_ids && id < usb_storage_usb_ids + size) { + unusual_dev = (id - usb_storage_usb_ids) + us_unusual_dev_list; + } else { + unusual_dev = &for_dynamic_ids; + + US_DEBUGP("%s %s 0x%04x 0x%04x\n", "Use Bulk-Only transport", + "with the Transparent SCSI protocol for dynamic id:", + id->idVendor, id->idProduct); + } + + result = usb_stor_probe1(&us, intf, id, unusual_dev); if (result) return result; @@ -1046,7 +1062,6 @@ static struct usb_driver usb_storage_driver = { .id_table = usb_storage_usb_ids, .supports_autosuspend = 1, .soft_unbind = 1, - .no_dynamic_id = 1, }; static int __init usb_stor_init(void) |