summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/mtd/chips/cfi_cmdset_0001.c26
-rw-r--r--drivers/mtd/chips/cfi_cmdset_0020.c2
-rw-r--r--drivers/mtd/devices/doc2000.c1
-rw-r--r--drivers/mtd/devices/doc2001.c1
-rw-r--r--drivers/mtd/devices/doc2001plus.c1
-rw-r--r--drivers/mtd/maps/Kconfig2
-rw-r--r--drivers/mtd/maps/amd76xrom.c4
-rw-r--r--drivers/mtd/maps/ck804xrom.c6
-rw-r--r--drivers/mtd/maps/esb2rom.c4
-rw-r--r--drivers/mtd/maps/ichxrom.c4
-rw-r--r--drivers/mtd/maps/netsc520.c4
-rw-r--r--drivers/mtd/maps/sc520cdp.c5
-rw-r--r--drivers/mtd/mtdchar.c5
-rw-r--r--drivers/mtd/mtdconcat.c4
-rw-r--r--drivers/mtd/mtdpart.c2
-rw-r--r--drivers/mtd/nand/Kconfig14
-rw-r--r--drivers/mtd/nand/Makefile1
-rw-r--r--drivers/mtd/nand/cafe.c89
-rw-r--r--drivers/mtd/nand/cafe_ecc.c2
-rw-r--r--drivers/mtd/nand/excite_nandflash.c248
-rw-r--r--drivers/mtd/nand/nand_base.c47
-rw-r--r--drivers/mtd/nand/s3c2410.c96
-rw-r--r--drivers/mtd/onenand/onenand_base.c596
-rw-r--r--drivers/mtd/onenand/onenand_bbt.c27
-rw-r--r--drivers/mtd/redboot.c19
25 files changed, 930 insertions, 280 deletions
diff --git a/drivers/mtd/chips/cfi_cmdset_0001.c b/drivers/mtd/chips/cfi_cmdset_0001.c
index f69184a92eb2..f334959a335b 100644
--- a/drivers/mtd/chips/cfi_cmdset_0001.c
+++ b/drivers/mtd/chips/cfi_cmdset_0001.c
@@ -397,9 +397,23 @@ struct mtd_info *cfi_cmdset_0001(struct map_info *map, int primary)
cfi_fixup(mtd, fixup_table);
for (i=0; i< cfi->numchips; i++) {
- cfi->chips[i].word_write_time = 1<<cfi->cfiq->WordWriteTimeoutTyp;
- cfi->chips[i].buffer_write_time = 1<<cfi->cfiq->BufWriteTimeoutTyp;
- cfi->chips[i].erase_time = 1000<<cfi->cfiq->BlockEraseTimeoutTyp;
+ if (cfi->cfiq->WordWriteTimeoutTyp)
+ cfi->chips[i].word_write_time =
+ 1<<cfi->cfiq->WordWriteTimeoutTyp;
+ else
+ cfi->chips[i].word_write_time = 50000;
+
+ if (cfi->cfiq->BufWriteTimeoutTyp)
+ cfi->chips[i].buffer_write_time =
+ 1<<cfi->cfiq->BufWriteTimeoutTyp;
+ /* No default; if it isn't specified, we won't use it */
+
+ if (cfi->cfiq->BlockEraseTimeoutTyp)
+ cfi->chips[i].erase_time =
+ 1000<<cfi->cfiq->BlockEraseTimeoutTyp;
+ else
+ cfi->chips[i].erase_time = 2000000;
+
cfi->chips[i].ref_point_counter = 0;
init_waitqueue_head(&(cfi->chips[i].wq));
}
@@ -546,13 +560,11 @@ static int cfi_intelext_partition_fixup(struct mtd_info *mtd,
struct cfi_intelext_programming_regioninfo *prinfo;
prinfo = (struct cfi_intelext_programming_regioninfo *)&extp->extra[offs];
mtd->writesize = cfi->interleave << prinfo->ProgRegShift;
- MTD_PROGREGION_CTRLMODE_VALID(mtd) = cfi->interleave * prinfo->ControlValid;
- MTD_PROGREGION_CTRLMODE_INVALID(mtd) = cfi->interleave * prinfo->ControlInvalid;
mtd->flags &= ~MTD_BIT_WRITEABLE;
printk(KERN_DEBUG "%s: program region size/ctrl_valid/ctrl_inval = %d/%d/%d\n",
map->name, mtd->writesize,
- MTD_PROGREGION_CTRLMODE_VALID(mtd),
- MTD_PROGREGION_CTRLMODE_INVALID(mtd));
+ cfi->interleave * prinfo->ControlValid,
+ cfi->interleave * prinfo->ControlInvalid);
}
/*
diff --git a/drivers/mtd/chips/cfi_cmdset_0020.c b/drivers/mtd/chips/cfi_cmdset_0020.c
index d56849f5f107..69d49e0250a9 100644
--- a/drivers/mtd/chips/cfi_cmdset_0020.c
+++ b/drivers/mtd/chips/cfi_cmdset_0020.c
@@ -662,7 +662,7 @@ static int cfi_staa_write_buffers (struct mtd_info *mtd, loff_t to,
* a small buffer for this.
* XXX: If the buffer size is not a multiple of 2, this will break
*/
-#define ECCBUF_SIZE (mtd->eccsize)
+#define ECCBUF_SIZE (mtd->writesize)
#define ECCBUF_DIV(x) ((x) & ~(ECCBUF_SIZE - 1))
#define ECCBUF_MOD(x) ((x) & (ECCBUF_SIZE - 1))
static int
diff --git a/drivers/mtd/devices/doc2000.c b/drivers/mtd/devices/doc2000.c
index 603a7951ac9b..8a0c4dec6351 100644
--- a/drivers/mtd/devices/doc2000.c
+++ b/drivers/mtd/devices/doc2000.c
@@ -569,7 +569,6 @@ void DoC2k_init(struct mtd_info *mtd)
mtd->type = MTD_NANDFLASH;
mtd->flags = MTD_CAP_NANDFLASH;
- mtd->ecctype = MTD_ECC_RS_DiskOnChip;
mtd->size = 0;
mtd->erasesize = 0;
mtd->writesize = 512;
diff --git a/drivers/mtd/devices/doc2001.c b/drivers/mtd/devices/doc2001.c
index fe71a12c2627..6f368aec5d5d 100644
--- a/drivers/mtd/devices/doc2001.c
+++ b/drivers/mtd/devices/doc2001.c
@@ -348,7 +348,6 @@ void DoCMil_init(struct mtd_info *mtd)
mtd->type = MTD_NANDFLASH;
mtd->flags = MTD_CAP_NANDFLASH;
- mtd->ecctype = MTD_ECC_RS_DiskOnChip;
mtd->size = 0;
/* FIXME: erase size is not always 8KiB */
diff --git a/drivers/mtd/devices/doc2001plus.c b/drivers/mtd/devices/doc2001plus.c
index ba4db686285a..88ba82df0fbb 100644
--- a/drivers/mtd/devices/doc2001plus.c
+++ b/drivers/mtd/devices/doc2001plus.c
@@ -472,7 +472,6 @@ void DoCMilPlus_init(struct mtd_info *mtd)
mtd->type = MTD_NANDFLASH;
mtd->flags = MTD_CAP_NANDFLASH;
- mtd->ecctype = MTD_ECC_RS_DiskOnChip;
mtd->size = 0;
mtd->erasesize = 0;
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index f457315579db..bbf0553bdb2e 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -204,7 +204,7 @@ config MTD_ESB2ROM
config MTD_CK804XROM
tristate "BIOS flash chip on Nvidia CK804"
- depends on X86 && MTD_JEDECPROBE
+ depends on X86 && MTD_JEDECPROBE && PCI
help
Support for treating the BIOS flash chip on nvidia motherboards
as an MTD device - with this you can reprogram your BIOS.
diff --git a/drivers/mtd/maps/amd76xrom.c b/drivers/mtd/maps/amd76xrom.c
index 78b671172bb2..728aed6ad722 100644
--- a/drivers/mtd/maps/amd76xrom.c
+++ b/drivers/mtd/maps/amd76xrom.c
@@ -205,8 +205,8 @@ static int __devinit amd76xrom_init_one (struct pci_dev *pdev,
(((unsigned long)(window->virt)) + offset);
map->map.size = 0xffffffffUL - map_top + 1UL;
/* Set the name of the map to the address I am trying */
- sprintf(map->map_name, "%s @%08lx",
- MOD_NAME, map->map.phys);
+ sprintf(map->map_name, "%s @%08Lx",
+ MOD_NAME, (unsigned long long)map->map.phys);
/* There is no generic VPP support */
for(map->map.bankwidth = 32; map->map.bankwidth;
diff --git a/drivers/mtd/maps/ck804xrom.c b/drivers/mtd/maps/ck804xrom.c
index 238d42e88ec5..3d4a4d8ac789 100644
--- a/drivers/mtd/maps/ck804xrom.c
+++ b/drivers/mtd/maps/ck804xrom.c
@@ -207,8 +207,8 @@ static int __devinit ck804xrom_init_one (struct pci_dev *pdev,
(((unsigned long)(window->virt)) + offset);
map->map.size = 0xffffffffUL - map_top + 1UL;
/* Set the name of the map to the address I am trying */
- sprintf(map->map_name, "%s @%08lx",
- MOD_NAME, map->map.phys);
+ sprintf(map->map_name, "%s @%08Lx",
+ MOD_NAME, (unsigned long long)map->map.phys);
/* There is no generic VPP support */
for(map->map.bankwidth = 32; map->map.bankwidth;
@@ -327,7 +327,7 @@ static int __init init_ck804xrom(void)
pdev = NULL;
for(id = ck804xrom_pci_tbl; id->vendor; id++) {
- pdev = pci_find_device(id->vendor, id->device, NULL);
+ pdev = pci_get_device(id->vendor, id->device, NULL);
if (pdev)
break;
}
diff --git a/drivers/mtd/maps/esb2rom.c b/drivers/mtd/maps/esb2rom.c
index a9d808a617c9..0bc013fd66a3 100644
--- a/drivers/mtd/maps/esb2rom.c
+++ b/drivers/mtd/maps/esb2rom.c
@@ -289,8 +289,8 @@ static int __devinit esb2rom_init_one(struct pci_dev *pdev,
(((unsigned long)(window->virt)) + offset);
map->map.size = 0xffffffffUL - map_top + 1UL;
/* Set the name of the map to the address I am trying */
- sprintf(map->map_name, "%s @%08lx",
- MOD_NAME, map->map.phys);
+ sprintf(map->map_name, "%s @%08Lx",
+ MOD_NAME, (unsigned long long)map->map.phys);
/* Firmware hubs only use vpp when being programmed
* in a factory setting. So in-place programming
diff --git a/drivers/mtd/maps/ichxrom.c b/drivers/mtd/maps/ichxrom.c
index 2bb3e63606e5..2c884c49e84a 100644
--- a/drivers/mtd/maps/ichxrom.c
+++ b/drivers/mtd/maps/ichxrom.c
@@ -227,8 +227,8 @@ static int __devinit ichxrom_init_one (struct pci_dev *pdev,
(((unsigned long)(window->virt)) + offset);
map->map.size = 0xffffffffUL - map_top + 1UL;
/* Set the name of the map to the address I am trying */
- sprintf(map->map_name, "%s @%08lx",
- MOD_NAME, map->map.phys);
+ sprintf(map->map_name, "%s @%08Lx",
+ MOD_NAME, (unsigned long long)map->map.phys);
/* Firmware hubs only use vpp when being programmed
* in a factory setting. So in-place programming
diff --git a/drivers/mtd/maps/netsc520.c b/drivers/mtd/maps/netsc520.c
index ed215470158b..95dcab2146ad 100644
--- a/drivers/mtd/maps/netsc520.c
+++ b/drivers/mtd/maps/netsc520.c
@@ -94,7 +94,9 @@ static struct mtd_info *mymtd;
static int __init init_netsc520(void)
{
- printk(KERN_NOTICE "NetSc520 flash device: 0x%lx at 0x%lx\n", netsc520_map.size, netsc520_map.phys);
+ printk(KERN_NOTICE "NetSc520 flash device: 0x%Lx at 0x%Lx\n",
+ (unsigned long long)netsc520_map.size,
+ (unsigned long long)netsc520_map.phys);
netsc520_map.virt = ioremap_nocache(netsc520_map.phys, netsc520_map.size);
if (!netsc520_map.virt) {
diff --git a/drivers/mtd/maps/sc520cdp.c b/drivers/mtd/maps/sc520cdp.c
index 9b50cfc355b1..4045e372b90d 100644
--- a/drivers/mtd/maps/sc520cdp.c
+++ b/drivers/mtd/maps/sc520cdp.c
@@ -237,8 +237,9 @@ static int __init init_sc520cdp(void)
#endif
for (i = 0; i < NUM_FLASH_BANKS; i++) {
- printk(KERN_NOTICE "SC520 CDP flash device: 0x%lx at 0x%lx\n",
- sc520cdp_map[i].size, sc520cdp_map[i].phys);
+ printk(KERN_NOTICE "SC520 CDP flash device: 0x%Lx at 0x%Lx\n",
+ (unsigned long long)sc520cdp_map[i].size,
+ (unsigned long long)sc520cdp_map[i].phys);
sc520cdp_map[i].virt = ioremap_nocache(sc520cdp_map[i].phys, sc520cdp_map[i].size);
diff --git a/drivers/mtd/mtdchar.c b/drivers/mtd/mtdchar.c
index 61a994ea8af1..1592eac64e57 100644
--- a/drivers/mtd/mtdchar.c
+++ b/drivers/mtd/mtdchar.c
@@ -419,8 +419,9 @@ static int mtd_ioctl(struct inode *inode, struct file *file,
info.erasesize = mtd->erasesize;
info.writesize = mtd->writesize;
info.oobsize = mtd->oobsize;
- info.ecctype = mtd->ecctype;
- info.eccsize = mtd->eccsize;
+ /* The below fields are obsolete */
+ info.ecctype = -1;
+ info.eccsize = 0;
if (copy_to_user(argp, &info, sizeof(struct mtd_info_user)))
return -EFAULT;
break;
diff --git a/drivers/mtd/mtdconcat.c b/drivers/mtd/mtdconcat.c
index 06902683bc2a..880580c44e01 100644
--- a/drivers/mtd/mtdconcat.c
+++ b/drivers/mtd/mtdconcat.c
@@ -727,8 +727,6 @@ struct mtd_info *mtd_concat_create(struct mtd_info *subdev[], /* subdevices to c
concat->mtd.erasesize = subdev[0]->erasesize;
concat->mtd.writesize = subdev[0]->writesize;
concat->mtd.oobsize = subdev[0]->oobsize;
- concat->mtd.ecctype = subdev[0]->ecctype;
- concat->mtd.eccsize = subdev[0]->eccsize;
if (subdev[0]->writev)
concat->mtd.writev = concat_writev;
if (subdev[0]->read_oob)
@@ -774,8 +772,6 @@ struct mtd_info *mtd_concat_create(struct mtd_info *subdev[], /* subdevices to c
if (concat->mtd.writesize != subdev[i]->writesize ||
concat->mtd.subpage_sft != subdev[i]->subpage_sft ||
concat->mtd.oobsize != subdev[i]->oobsize ||
- concat->mtd.ecctype != subdev[i]->ecctype ||
- concat->mtd.eccsize != subdev[i]->eccsize ||
!concat->mtd.read_oob != !subdev[i]->read_oob ||
!concat->mtd.write_oob != !subdev[i]->write_oob) {
kfree(concat);
diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c
index bafd2fba87bd..633def3fb087 100644
--- a/drivers/mtd/mtdpart.c
+++ b/drivers/mtd/mtdpart.c
@@ -338,8 +338,6 @@ int add_mtd_partitions(struct mtd_info *master,
slave->mtd.size = parts[i].size;
slave->mtd.writesize = master->writesize;
slave->mtd.oobsize = master->oobsize;
- slave->mtd.ecctype = master->ecctype;
- slave->mtd.eccsize = master->eccsize;
slave->mtd.subpage_sft = master->subpage_sft;
slave->mtd.name = parts[i].name;
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 358f55a82dbe..2d12dcdd740c 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -126,10 +126,6 @@ config MTD_NAND_S3C2410_HWECC
incorrect ECC generation, and if using these, the default of
software ECC is preferable.
- If you lay down a device with the hardware ECC, then you will
- currently not be able to switch to software, as there is no
- implementation for ECC method used by the S3C2410
-
config MTD_NAND_NDFC
tristate "NDFC NanD Flash Controller"
depends on MTD_NAND && 44x
@@ -221,9 +217,17 @@ config MTD_NAND_SHARPSL
tristate "Support for NAND Flash on Sharp SL Series (C7xx + others)"
depends on MTD_NAND && ARCH_PXA
+config MTD_NAND_BASLER_EXCITE
+ tristate "Support for NAND Flash on Basler eXcite"
+ depends on MTD_NAND && BASLER_EXCITE
+ help
+ This enables the driver for the NAND flash device found on the
+ Basler eXcite Smart Camera. If built as a module, the driver
+ will be named "excite_nandflash.ko".
+
config MTD_NAND_CAFE
tristate "NAND support for OLPC CAFÉ chip"
- depends on PCI
+ depends on MTD_NAND && PCI
help
Use NAND flash attached to the CAFÉ chip designed for the $100
laptop.
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index f7a53f0b7017..80f1dfc77949 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -24,6 +24,7 @@ obj-$(CONFIG_MTD_NAND_NANDSIM) += nandsim.o
obj-$(CONFIG_MTD_NAND_CS553X) += cs553x_nand.o
obj-$(CONFIG_MTD_NAND_NDFC) += ndfc.o
obj-$(CONFIG_MTD_NAND_AT91) += at91_nand.o
+obj-$(CONFIG_MTD_NAND_BASLER_EXCITE) += excite_nandflash.o
nand-objs := nand_base.o nand_bbt.o
cafe_nand-objs := cafe.o cafe_ecc.o
diff --git a/drivers/mtd/nand/cafe.c b/drivers/mtd/nand/cafe.c
index 08cb060dfa3d..fd6bb3ed40df 100644
--- a/drivers/mtd/nand/cafe.c
+++ b/drivers/mtd/nand/cafe.c
@@ -78,8 +78,9 @@ module_param(regdebug, int, 0644);
static int checkecc = 1;
module_param(checkecc, int, 0644);
-static int slowtiming = 0;
-module_param(slowtiming, int, 0644);
+static int numtimings;
+static int timing[3];
+module_param_array(timing, int, &numtimings, 0644);
/* Hrm. Why isn't this already conditional on something in the struct device? */
#define cafe_dev_dbg(dev, args...) do { if (debug) dev_dbg(dev, ##args); } while(0)
@@ -264,10 +265,10 @@ static void cafe_nand_cmdfunc(struct mtd_info *mtd, unsigned command,
ndelay(100);
if (1) {
- int c = 500000;
+ int c;
uint32_t irqs;
- while (c--) {
+ for (c = 500000; c != 0; c--) {
irqs = cafe_readl(cafe, NAND_IRQ);
if (irqs & doneint)
break;
@@ -529,6 +530,7 @@ static int __devinit cafe_nand_probe(struct pci_dev *pdev,
{
struct mtd_info *mtd;
struct cafe_priv *cafe;
+ uint32_t timing1, timing2, timing3;
uint32_t ctrl;
int err = 0;
@@ -580,31 +582,45 @@ static int __devinit cafe_nand_probe(struct pci_dev *pdev,
cafe->nand.block_bad = cafe_nand_block_bad;
}
+ if (numtimings && numtimings != 3) {
+ dev_warn(&cafe->pdev->dev, "%d timing register values ignored; precisely three are required\n", numtimings);
+ }
+
+ if (numtimings == 3) {
+ timing1 = timing[0];
+ timing2 = timing[1];
+ timing3 = timing[2];
+ cafe_dev_dbg(&cafe->pdev->dev, "Using provided timings (%08x %08x %08x)\n",
+ timing1, timing2, timing3);
+ } else {
+ timing1 = cafe_readl(cafe, NAND_TIMING1);
+ timing2 = cafe_readl(cafe, NAND_TIMING2);
+ timing3 = cafe_readl(cafe, NAND_TIMING3);
+
+ if (timing1 | timing2 | timing3) {
+ cafe_dev_dbg(&cafe->pdev->dev, "Timing registers already set (%08x %08x %08x)\n", timing1, timing2, timing3);
+ } else {
+ dev_warn(&cafe->pdev->dev, "Timing registers unset; using most conservative defaults\n");
+ timing1 = timing2 = timing3 = 0xffffffff;
+ }
+ }
+
/* Start off by resetting the NAND controller completely */
cafe_writel(cafe, 1, NAND_RESET);
cafe_writel(cafe, 0, NAND_RESET);
- cafe_writel(cafe, 0xffffffff, NAND_IRQ_MASK);
+ cafe_writel(cafe, timing1, NAND_TIMING1);
+ cafe_writel(cafe, timing2, NAND_TIMING2);
+ cafe_writel(cafe, timing3, NAND_TIMING3);
- /* Timings from Marvell's test code (not verified or calculated by us) */
- if (!slowtiming) {
- cafe_writel(cafe, 0x01010a0a, NAND_TIMING1);
- cafe_writel(cafe, 0x24121212, NAND_TIMING2);
- cafe_writel(cafe, 0x11000000, NAND_TIMING3);
- } else {
- cafe_writel(cafe, 0xffffffff, NAND_TIMING1);
- cafe_writel(cafe, 0xffffffff, NAND_TIMING2);
- cafe_writel(cafe, 0xffffffff, NAND_TIMING3);
- }
cafe_writel(cafe, 0xffffffff, NAND_IRQ_MASK);
err = request_irq(pdev->irq, &cafe_nand_interrupt, IRQF_SHARED,
"CAFE NAND", mtd);
if (err) {
dev_warn(&pdev->dev, "Could not register IRQ %d\n", pdev->irq);
-
goto out_free_dma;
}
-#if 1
+
/* Disable master reset, enable NAND clock */
ctrl = cafe_readl(cafe, GLOBAL_CTRL);
ctrl &= 0xffffeff0;
@@ -631,32 +647,8 @@ static int __devinit cafe_nand_probe(struct pci_dev *pdev,
cafe_writel(cafe, 0x80000007, GLOBAL_IRQ_MASK);
cafe_dev_dbg(&cafe->pdev->dev, "Control %x, IRQ mask %x\n",
cafe_readl(cafe, GLOBAL_CTRL), cafe_readl(cafe, GLOBAL_IRQ_MASK));
-#endif
-#if 1
- mtd->writesize=2048;
- mtd->oobsize = 0x40;
- memset(cafe->dmabuf, 0x5a, 2112);
- cafe->nand.cmdfunc(mtd, NAND_CMD_READID, 0, -1);
- cafe->nand.read_byte(mtd);
- cafe->nand.read_byte(mtd);
- cafe->nand.read_byte(mtd);
- cafe->nand.read_byte(mtd);
- cafe->nand.read_byte(mtd);
-#endif
-#if 0
- cafe->nand.cmdfunc(mtd, NAND_CMD_READ0, 0, 0);
- // nand_wait_ready(mtd);
- cafe->nand.read_byte(mtd);
- cafe->nand.read_byte(mtd);
- cafe->nand.read_byte(mtd);
- cafe->nand.read_byte(mtd);
-#endif
-#if 0
- writel(0x84600070, cafe->mmio);
- udelay(10);
- cafe_dev_dbg(&cafe->pdev->dev, "Status %x\n", cafe_readl(cafe, NAND_NONMEM));
-#endif
- /* Scan to find existance of the device */
+
+ /* Scan to find existence of the device */
if (nand_scan_ident(mtd, 1)) {
err = -ENXIO;
goto out_irq;
@@ -760,13 +752,4 @@ module_exit(cafe_nand_exit);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>");
-MODULE_DESCRIPTION("NAND flash driver for OLPC CAFE chip");
-
-/* Correct ECC for 2048 bytes of 0xff:
- 41 a0 71 65 54 27 f3 93 ec a9 be ed 0b a1 */
-
-/* dwmw2's B-test board, in case of completely screwing it:
-Bad eraseblock 2394 at 0x12b40000
-Bad eraseblock 2627 at 0x14860000
-Bad eraseblock 3349 at 0x1a2a0000
-*/
+MODULE_DESCRIPTION("NAND flash driver for OLPC CAFÉ chip");
diff --git a/drivers/mtd/nand/cafe_ecc.c b/drivers/mtd/nand/cafe_ecc.c
index 1b9fa05a4474..ea5c8491d2c5 100644
--- a/drivers/mtd/nand/cafe_ecc.c
+++ b/drivers/mtd/nand/cafe_ecc.c
@@ -1045,7 +1045,7 @@ static unsigned short err_pos_lut[4096] = {
static unsigned short err_pos(unsigned short din)
{
- BUG_ON(din > 4096);
+ BUG_ON(din >= ARRAY_SIZE(err_pos_lut));
return err_pos_lut[din];
}
static int chk_no_err_only(unsigned short *chk_syndrome_list, unsigned short *err_info)
diff --git a/drivers/mtd/nand/excite_nandflash.c b/drivers/mtd/nand/excite_nandflash.c
new file mode 100644
index 000000000000..7e9afc4c7757
--- /dev/null
+++ b/drivers/mtd/nand/excite_nandflash.c
@@ -0,0 +1,248 @@
+/*
+* Copyright (C) 2005 - 2007 by Basler Vision Technologies AG
+* Author: Thomas Koeller <thomas.koeller.qbaslerweb.com>
+* Original code by Thies Moeller <thies.moeller@baslerweb.com>
+*
+* This program is free software; you can redistribute it and/or modify
+* it under the terms of the GNU General Public License as published by
+* the Free Software Foundation; either version 2 of the License, or
+* (at your option) any later version.
+*
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with this program; if not, write to the Free Software
+* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+*/
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/kernel.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/io.h>
+#include <asm/rm9k-ocd.h>
+
+#include <excite_nandflash.h>
+
+#define EXCITE_NANDFLASH_VERSION "0.1"
+
+/* I/O register offsets */
+#define EXCITE_NANDFLASH_DATA_BYTE 0x00
+#define EXCITE_NANDFLASH_STATUS_BYTE 0x0c
+#define EXCITE_NANDFLASH_ADDR_BYTE 0x10
+#define EXCITE_NANDFLASH_CMD_BYTE 0x14
+
+/* prefix for debug output */
+static const char module_id[] = "excite_nandflash";
+
+/*
+ * partition definition
+ */
+static const struct mtd_partition partition_info[] = {
+ {
+ .name = "eXcite RootFS",
+ .offset = 0,
+ .size = MTDPART_SIZ_FULL
+ }
+};
+
+static inline const struct resource *
+excite_nand_get_resource(struct platform_device *d, unsigned long flags,
+ const char *basename)
+{
+ char buf[80];
+
+ if (snprintf(buf, sizeof buf, "%s_%u", basename, d->id) >= sizeof buf)
+ return NULL;
+ return platform_get_resource_byname(d, flags, buf);
+}
+
+static inline void __iomem *
+excite_nand_map_regs(struct platform_device *d, const char *basename)
+{
+ void *result = NULL;
+ const struct resource *const r =
+ excite_nand_get_resource(d, IORESOURCE_MEM, basename);
+
+ if (r)
+ result = ioremap_nocache(r->start, r->end + 1 - r->start);
+ return result;
+}
+
+/* controller and mtd information */
+struct excite_nand_drvdata {
+ struct mtd_info board_mtd;
+ struct nand_chip board_chip;
+ void __iomem *regs;
+ void __iomem *tgt;
+};
+
+/* Control function */
+static void excite_nand_control(struct mtd_info *mtd, int cmd,
+ unsigned int ctrl)
+{
+ struct excite_nand_drvdata * const d =
+ container_of(mtd, struct excite_nand_drvdata, board_mtd);
+
+ switch (ctrl) {
+ case NAND_CTRL_CHANGE | NAND_CTRL_CLE:
+ d->tgt = d->regs + EXCITE_NANDFLASH_CMD_BYTE;
+ break;
+ case NAND_CTRL_CHANGE | NAND_CTRL_ALE:
+ d->tgt = d->regs + EXCITE_NANDFLASH_ADDR_BYTE;
+ break;
+ case NAND_CTRL_CHANGE | NAND_NCE:
+ d->tgt = d->regs + EXCITE_NANDFLASH_DATA_BYTE;
+ break;
+ }
+
+ if (cmd != NAND_CMD_NONE)
+ __raw_writeb(cmd, d->tgt);
+}
+
+/* Return 0 if flash is busy, 1 if ready */
+static int excite_nand_devready(struct mtd_info *mtd)
+{
+ struct excite_nand_drvdata * const drvdata =
+ container_of(mtd, struct excite_nand_drvdata, board_mtd);
+
+ return __raw_readb(drvdata->regs + EXCITE_NANDFLASH_STATUS_BYTE);
+}
+
+/*
+ * Called by device layer to remove the driver.
+ * The binding to the mtd and all allocated
+ * resources are released.
+ */
+static int __exit excite_nand_remove(struct device *dev)
+{
+ struct excite_nand_drvdata * const this = dev_get_drvdata(dev);
+
+ dev_set_drvdata(dev, NULL);
+
+ if (unlikely(!this)) {
+ printk(KERN_ERR "%s: called %s without private data!!",
+ module_id, __func__);
+ return -EINVAL;
+ }
+
+ /* first thing we need to do is release our mtd
+ * then go through freeing the resource used
+ */
+ nand_release(&this->board_mtd);
+
+ /* free the common resources */
+ iounmap(this->regs);
+ kfree(this);
+
+ DEBUG(MTD_DEBUG_LEVEL1, "%s: removed\n", module_id);
+ return 0;
+}
+
+/*
+ * Called by device layer when it finds a device matching
+ * one our driver can handle. This code checks to see if
+ * it can allocate all necessary resources then calls the
+ * nand layer to look for devices.
+*/
+static int __init excite_nand_probe(struct device *dev)
+{
+ struct platform_device * const pdev = to_platform_device(dev);
+ struct excite_nand_drvdata *drvdata; /* private driver data */
+ struct nand_chip *board_chip; /* private flash chip data */
+ struct mtd_info *board_mtd; /* mtd info for this board */
+ int scan_res;
+
+ drvdata = kzalloc(sizeof(*drvdata), GFP_KERNEL);
+ if (unlikely(!drvdata)) {
+ printk(KERN_ERR "%s: no memory for drvdata\n",
+ module_id);
+ return -ENOMEM;
+ }
+
+ /* bind private data into driver */
+ dev_set_drvdata(dev, drvdata);
+
+ /* allocate and map the resource */
+ drvdata->regs =
+ excite_nand_map_regs(pdev, EXCITE_NANDFLASH_RESOURCE_REGS);
+
+ if (unlikely(!drvdata->regs)) {
+ printk(KERN_ERR "%s: cannot reserve register region\n",
+ module_id);
+ kfree(drvdata);
+ return -ENXIO;
+ }
+
+ drvdata->tgt = drvdata->regs + EXCITE_NANDFLASH_DATA_BYTE;
+
+ /* initialise our chip */
+ board_chip = &drvdata->board_chip;
+ board_chip->IO_ADDR_R = board_chip->IO_ADDR_W =
+ drvdata->regs + EXCITE_NANDFLASH_DATA_BYTE;
+ board_chip->cmd_ctrl = excite_nand_control;
+ board_chip->dev_ready = excite_nand_devready;
+ board_chip->chip_delay = 25;
+ board_chip->ecc.mode = NAND_ECC_SOFT;
+
+ /* link chip to mtd */
+ board_mtd = &drvdata->board_mtd;
+ board_mtd->priv = board_chip;
+
+ DEBUG(MTD_DEBUG_LEVEL2, "%s: device scan\n", module_id);
+ scan_res = nand_scan(&drvdata->board_mtd, 1);
+
+ if (likely(!scan_res)) {
+ DEBUG(MTD_DEBUG_LEVEL2, "%s: register partitions\n", module_id);
+ add_mtd_partitions(&drvdata->board_mtd, partition_info,
+ sizeof partition_info / sizeof partition_info[0]);
+ } else {
+ iounmap(drvdata->regs);
+ kfree(drvdata);
+ printk(KERN_ERR "%s: device scan failed\n", module_id);
+ return -EIO;
+ }
+ return 0;
+}
+
+static struct device_driver excite_nand_driver = {
+ .name = "excite_nand",
+ .bus = &platform_bus_type,
+ .probe = excite_nand_probe,
+ .remove = __exit_p(excite_nand_remove)
+};
+
+static int __init excite_nand_init(void)
+{
+ pr_info("Basler eXcite nand flash driver Version "
+ EXCITE_NANDFLASH_VERSION "\n");
+ return driver_register(&excite_nand_driver);
+}
+
+static void __exit excite_nand_exit(void)
+{
+ driver_unregister(&excite_nand_driver);
+}
+
+module_init(excite_nand_init);
+module_exit(excite_nand_exit);
+
+MODULE_AUTHOR("Thomas Koeller <thomas.koeller@baslerweb.com>");
+MODULE_DESCRIPTION("Basler eXcite NAND-Flash driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(EXCITE_NANDFLASH_VERSION)
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index dfe56e03e48b..acaf97bc80d1 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -1272,10 +1272,25 @@ static int nand_do_read_oob(struct mtd_info *mtd, loff_t from,
DEBUG(MTD_DEBUG_LEVEL3, "nand_read_oob: from = 0x%08Lx, len = %i\n",
(unsigned long long)from, readlen);
- if (ops->mode == MTD_OOB_RAW)
- len = mtd->oobsize;
- else
+ if (ops->mode == MTD_OOB_AUTO)
len = chip->ecc.layout->oobavail;
+ else
+ len = mtd->oobsize;
+
+ if (unlikely(ops->ooboffs >= len)) {
+ DEBUG(MTD_DEBUG_LEVEL0, "nand_read_oob: "
+ "Attempt to start read outside oob\n");
+ return -EINVAL;
+ }
+
+ /* Do not allow reads past end of device */
+ if (unlikely(from >= mtd->size ||
+ ops->ooboffs + readlen > ((mtd->size >> chip->page_shift) -
+ (from >> chip->page_shift)) * len)) {
+ DEBUG(MTD_DEBUG_LEVEL0, "nand_read_oob: "
+ "Attempt read beyond end of device\n");
+ return -EINVAL;
+ }
chipnr = (int)(from >> chip->chip_shift);
chip->select_chip(mtd, chipnr);
@@ -1742,19 +1757,40 @@ static int nand_write(struct mtd_info *mtd, loff_t to, size_t len,
static int nand_do_write_oob(struct mtd_info *mtd, loff_t to,
struct mtd_oob_ops *ops)
{
- int chipnr, page, status;
+ int chipnr, page, status, len;
struct nand_chip *chip = mtd->priv;
DEBUG(MTD_DEBUG_LEVEL3, "nand_write_oob: to = 0x%08x, len = %i\n",
(unsigned int)to, (int)ops->ooblen);
+ if (ops->mode == MTD_OOB_AUTO)
+ len = chip->ecc.layout->oobavail;
+ else
+ len = mtd->oobsize;
+
/* Do not allow write past end of page */
- if ((ops->ooboffs + ops->ooblen) > mtd->oobsize) {
+ if ((ops->ooboffs + ops->ooblen) > len) {
DEBUG(MTD_DEBUG_LEVEL0, "nand_write_oob: "
"Attempt to write past end of page\n");
return -EINVAL;
}
+ if (unlikely(ops->ooboffs >= len)) {
+ DEBUG(MTD_DEBUG_LEVEL0, "nand_read_oob: "
+ "Attempt to start write outside oob\n");
+ return -EINVAL;
+ }
+
+ /* Do not allow reads past end of device */
+ if (unlikely(to >= mtd->size ||
+ ops->ooboffs + ops->ooblen >
+ ((mtd->size >> chip->page_shift) -
+ (to >> chip->page_shift)) * len)) {
+ DEBUG(MTD_DEBUG_LEVEL0, "nand_read_oob: "
+ "Attempt write beyond end of device\n");
+ return -EINVAL;
+ }
+
chipnr = (int)(to >> chip->chip_shift);
chip->select_chip(mtd, chipnr);
@@ -2530,7 +2566,6 @@ int nand_scan_tail(struct mtd_info *mtd)
/* Fill in remaining MTD driver data */
mtd->type = MTD_NANDFLASH;
mtd->flags = MTD_CAP_NANDFLASH;
- mtd->ecctype = MTD_ECC_SW;
mtd->erase = nand_erase;
mtd->point = NULL;
mtd->unpoint = NULL;
diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c
index 8b3203571eeb..0ddfd6de75c5 100644
--- a/drivers/mtd/nand/s3c2410.c
+++ b/drivers/mtd/nand/s3c2410.c
@@ -337,17 +337,69 @@ static int s3c2412_nand_devready(struct mtd_info *mtd)
static int s3c2410_nand_correct_data(struct mtd_info *mtd, u_char *dat,
u_char *read_ecc, u_char *calc_ecc)
{
- pr_debug("s3c2410_nand_correct_data(%p,%p,%p,%p)\n", mtd, dat, read_ecc, calc_ecc);
+ struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
+ unsigned int diff0, diff1, diff2;
+ unsigned int bit, byte;
- pr_debug("eccs: read %02x,%02x,%02x vs calc %02x,%02x,%02x\n",
- read_ecc[0], read_ecc[1], read_ecc[2], calc_ecc[0], calc_ecc[1], calc_ecc[2]);
+ pr_debug("%s(%p,%p,%p,%p)\n", __func__, mtd, dat, read_ecc, calc_ecc);
- if (read_ecc[0] == calc_ecc[0] && read_ecc[1] == calc_ecc[1] && read_ecc[2] == calc_ecc[2])
- return 0;
+ diff0 = read_ecc[0] ^ calc_ecc[0];
+ diff1 = read_ecc[1] ^ calc_ecc[1];
+ diff2 = read_ecc[2] ^ calc_ecc[2];
+
+ pr_debug("%s: rd %02x%02x%02x calc %02x%02x%02x diff %02x%02x%02x\n",
+ __func__,
+ read_ecc[0], read_ecc[1], read_ecc[2],
+ calc_ecc[0], calc_ecc[1], calc_ecc[2],
+ diff0, diff1, diff2);
+
+ if (diff0 == 0 && diff1 == 0 && diff2 == 0)
+ return 0; /* ECC is ok */
+
+ /* Can we correct this ECC (ie, one row and column change).
+ * Note, this is similar to the 256 error code on smartmedia */
+
+ if (((diff0 ^ (diff0 >> 1)) & 0x55) == 0x55 &&
+ ((diff1 ^ (diff1 >> 1)) & 0x55) == 0x55 &&
+ ((diff2 ^ (diff2 >> 1)) & 0x55) == 0x55) {
+ /* calculate the bit position of the error */
+
+ bit = (diff2 >> 2) & 1;
+ bit |= (diff2 >> 3) & 2;
+ bit |= (diff2 >> 4) & 4;
+
+ /* calculate the byte position of the error */
+
+ byte = (diff1 << 1) & 0x80;
+ byte |= (diff1 << 2) & 0x40;
+ byte |= (diff1 << 3) & 0x20;
+ byte |= (diff1 << 4) & 0x10;
+
+ byte |= (diff0 >> 3) & 0x08;
+ byte |= (diff0 >> 2) & 0x04;
+ byte |= (diff0 >> 1) & 0x02;
+ byte |= (diff0 >> 0) & 0x01;
- /* we curently have no method for correcting the error */
+ byte |= (diff2 << 8) & 0x100;
- return -1;
+ dev_dbg(info->device, "correcting error bit %d, byte %d\n",
+ bit, byte);
+
+ dat[byte] ^= (1 << bit);
+ return 1;
+ }
+
+ /* if there is only one bit difference in the ECC, then
+ * one of only a row or column parity has changed, which
+ * means the error is most probably in the ECC itself */
+
+ diff0 |= (diff1 << 8);
+ diff0 |= (diff2 << 16);
+
+ if ((diff0 & ~(1<<fls(diff0))) == 0)
+ return 1;
+
+ return 0;
}
/* ECC functions
@@ -366,6 +418,15 @@ static void s3c2410_nand_enable_hwecc(struct mtd_info *mtd, int mode)
writel(ctrl, info->regs + S3C2410_NFCONF);
}
+static void s3c2412_nand_enable_hwecc(struct mtd_info *mtd, int mode)
+{
+ struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
+ unsigned long ctrl;
+
+ ctrl = readl(info->regs + S3C2440_NFCONT);
+ writel(ctrl | S3C2412_NFCONT_INIT_MAIN_ECC, info->regs + S3C2440_NFCONT);
+}
+
static void s3c2440_nand_enable_hwecc(struct mtd_info *mtd, int mode)
{
struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
@@ -383,6 +444,21 @@ static int s3c2410_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u
ecc_code[1] = readb(info->regs + S3C2410_NFECC + 1);
ecc_code[2] = readb(info->regs + S3C2410_NFECC + 2);
+ pr_debug("%s: returning ecc %02x%02x%02x\n", __func__,
+ ecc_code[0], ecc_code[1], ecc_code[2]);
+
+ return 0;
+}
+
+static int s3c2412_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code)
+{
+ struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
+ unsigned long ecc = readl(info->regs + S3C2412_NFMECC0);
+
+ ecc_code[0] = ecc;
+ ecc_code[1] = ecc >> 8;
+ ecc_code[2] = ecc >> 16;
+
pr_debug("calculate_ecc: returning ecc %02x,%02x,%02x\n", ecc_code[0], ecc_code[1], ecc_code[2]);
return 0;
@@ -397,7 +473,7 @@ static int s3c2440_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u
ecc_code[1] = ecc >> 8;
ecc_code[2] = ecc >> 16;
- pr_debug("calculate_ecc: returning ecc %02x,%02x,%02x\n", ecc_code[0], ecc_code[1], ecc_code[2]);
+ pr_debug("%s: returning ecc %06x\n", __func__, ecc);
return 0;
}
@@ -565,6 +641,10 @@ static void s3c2410_nand_init_chip(struct s3c2410_nand_info *info,
break;
case TYPE_S3C2412:
+ chip->ecc.hwctl = s3c2412_nand_enable_hwecc;
+ chip->ecc.calculate = s3c2412_nand_calculate_ecc;
+ break;
+
case TYPE_S3C2440:
chip->ecc.hwctl = s3c2440_nand_enable_hwecc;
chip->ecc.calculate = s3c2440_nand_calculate_ecc;
diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c
index 2da6bb26353e..7f1cb6e5dccb 100644
--- a/drivers/mtd/onenand/onenand_base.c
+++ b/drivers/mtd/onenand/onenand_base.c
@@ -1,7 +1,7 @@
/*
* linux/drivers/mtd/onenand/onenand_base.c
*
- * Copyright (C) 2005-2006 Samsung Electronics
+ * Copyright (C) 2005-2007 Samsung Electronics
* Kyungmin Park <kyungmin.park@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
@@ -94,16 +94,9 @@ static void onenand_writew(unsigned short value, void __iomem *addr)
*/
static int onenand_block_address(struct onenand_chip *this, int block)
{
- if (this->device_id & ONENAND_DEVICE_IS_DDP) {
- /* Device Flash Core select, NAND Flash Block Address */
- int dfs = 0;
-
- if (block & this->density_mask)
- dfs = 1;
-
- return (dfs << ONENAND_DDP_SHIFT) |
- (block & (this->density_mask - 1));
- }
+ /* Device Flash Core select, NAND Flash Block Address */
+ if (block & this->density_mask)
+ return ONENAND_DDP_CHIP1 | (block ^ this->density_mask);
return block;
}
@@ -118,17 +111,11 @@ static int onenand_block_address(struct onenand_chip *this, int block)
*/
static int onenand_bufferram_address(struct onenand_chip *this, int block)
{
- if (this->device_id & ONENAND_DEVICE_IS_DDP) {
- /* Device BufferRAM Select */
- int dbs = 0;
-
- if (block & this->density_mask)
- dbs = 1;
+ /* Device BufferRAM Select */
+ if (block & this->density_mask)
+ return ONENAND_DDP_CHIP1;
- return (dbs << ONENAND_DDP_SHIFT);
- }
-
- return 0;
+ return ONENAND_DDP_CHIP0;
}
/**
@@ -317,22 +304,25 @@ static int onenand_wait(struct mtd_info *mtd, int state)
ctrl = this->read_word(this->base + ONENAND_REG_CTRL_STATUS);
if (ctrl & ONENAND_CTRL_ERROR) {
- DEBUG(MTD_DEBUG_LEVEL0, "onenand_wait: controller error = 0x%04x\n", ctrl);
+ printk(KERN_ERR "onenand_wait: controller error = 0x%04x\n", ctrl);
if (ctrl & ONENAND_CTRL_LOCK)
- DEBUG(MTD_DEBUG_LEVEL0, "onenand_wait: it's locked error.\n");
+ printk(KERN_ERR "onenand_wait: it's locked error.\n");
return ctrl;
}
if (interrupt & ONENAND_INT_READ) {
int ecc = this->read_word(this->base + ONENAND_REG_ECC_STATUS);
if (ecc) {
- DEBUG(MTD_DEBUG_LEVEL0, "onenand_wait: ECC error = 0x%04x\n", ecc);
+ printk(KERN_ERR "onenand_wait: ECC error = 0x%04x\n", ecc);
if (ecc & ONENAND_ECC_2BIT_ALL) {
mtd->ecc_stats.failed++;
return ecc;
} else if (ecc & ONENAND_ECC_1BIT_ALL)
mtd->ecc_stats.corrected++;
}
+ } else if (state == FL_READING) {
+ printk(KERN_ERR "onenand_wait: read timeout! ctrl=0x%04x intr=0x%04x\n", ctrl, interrupt);
+ return -EIO;
}
return 0;
@@ -587,22 +577,32 @@ static int onenand_write_bufferram(struct mtd_info *mtd, int area,
static int onenand_check_bufferram(struct mtd_info *mtd, loff_t addr)
{
struct onenand_chip *this = mtd->priv;
- int block, page;
- int i;
+ int blockpage, found = 0;
+ unsigned int i;
- block = (int) (addr >> this->erase_shift);
- page = (int) (addr >> this->page_shift);
- page &= this->page_mask;
+ blockpage = (int) (addr >> this->page_shift);
+ /* Is there valid data? */
i = ONENAND_CURRENT_BUFFERRAM(this);
+ if (this->bufferram[i].blockpage == blockpage)
+ found = 1;
+ else {
+ /* Check another BufferRAM */
+ i = ONENAND_NEXT_BUFFERRAM(this);
+ if (this->bufferram[i].blockpage == blockpage) {
+ ONENAND_SET_NEXT_BUFFERRAM(this);
+ found = 1;
+ }
+ }
- /* Is there valid data? */
- if (this->bufferram[i].block == block &&
- this->bufferram[i].page == page &&
- this->bufferram[i].valid)
- return 1;
+ if (found && ONENAND_IS_DDP(this)) {
+ /* Select DataRAM for DDP */
+ int block = (int) (addr >> this->erase_shift);
+ int value = onenand_bufferram_address(this, block);
+ this->write_word(value, this->base + ONENAND_REG_START_ADDRESS2);
+ }
- return 0;
+ return found;
}
/**
@@ -613,31 +613,49 @@ static int onenand_check_bufferram(struct mtd_info *mtd, loff_t addr)
*
* Update BufferRAM information
*/
-static int onenand_update_bufferram(struct mtd_info *mtd, loff_t addr,
+static void onenand_update_bufferram(struct mtd_info *mtd, loff_t addr,
int valid)
{
struct onenand_chip *this = mtd->priv;
- int block, page;
- int i;
+ int blockpage;
+ unsigned int i;
- block = (int) (addr >> this->erase_shift);
- page = (int) (addr >> this->page_shift);
- page &= this->page_mask;
+ blockpage = (int) (addr >> this->page_shift);
- /* Invalidate BufferRAM */
- for (i = 0; i < MAX_BUFFERRAM; i++) {
- if (this->bufferram[i].block == block &&
- this->bufferram[i].page == page)
- this->bufferram[i].valid = 0;
- }
+ /* Invalidate another BufferRAM */
+ i = ONENAND_NEXT_BUFFERRAM(this);
+ if (this->bufferram[i].blockpage == blockpage)
+ this->bufferram[i].blockpage = -1;
/* Update BufferRAM */
i = ONENAND_CURRENT_BUFFERRAM(this);
- this->bufferram[i].block = block;
- this->bufferram[i].page = page;
- this->bufferram[i].valid = valid;
+ if (valid)
+ this->bufferram[i].blockpage = blockpage;
+ else
+ this->bufferram[i].blockpage = -1;
+}
- return 0;
+/**
+ * onenand_invalidate_bufferram - [GENERIC] Invalidate BufferRAM information
+ * @param mtd MTD data structure
+ * @param addr start address to invalidate
+ * @param len length to invalidate
+ *
+ * Invalidate BufferRAM information
+ */
+static void onenand_invalidate_bufferram(struct mtd_info *mtd, loff_t addr,
+ unsigned int len)
+{
+ struct onenand_chip *this = mtd->priv;
+ int i;
+ loff_t end_addr = addr + len;
+
+ /* Invalidate BufferRAM */
+ for (i = 0; i < MAX_BUFFERRAM; i++) {
+ loff_t buf_addr = this->bufferram[i].blockpage << this->page_shift;
+ if (buf_addr >= addr && buf_addr < end_addr)
+ this->bufferram[i].blockpage = -1;
+ }
}
/**
@@ -716,7 +734,7 @@ static int onenand_read(struct mtd_info *mtd, loff_t from, size_t len,
/* Do not allow reads past end of device */
if ((from + len) > mtd->size) {
- DEBUG(MTD_DEBUG_LEVEL0, "onenand_read: Attempt read beyond end of device\n");
+ printk(KERN_ERR "onenand_read: Attempt read beyond end of device\n");
*retlen = 0;
return -EINVAL;
}
@@ -724,8 +742,6 @@ static int onenand_read(struct mtd_info *mtd, loff_t from, size_t len,
/* Grab the lock and see if the device is available */
onenand_get_device(mtd, FL_READING);
- /* TODO handling oob */
-
stats = mtd->ecc_stats;
/* Read-while-load method */
@@ -754,9 +770,9 @@ static int onenand_read(struct mtd_info *mtd, loff_t from, size_t len,
* Now we issued chip 1 read and pointed chip 1
* bufferam so we have to point chip 0 bufferam.
*/
- if (this->device_id & ONENAND_DEVICE_IS_DDP &&
- unlikely(from == (this->chipsize >> 1))) {
- this->write_word(0, this->base + ONENAND_REG_START_ADDRESS2);
+ if (ONENAND_IS_DDP(this) &&
+ unlikely(from == (this->chipsize >> 1))) {
+ this->write_word(ONENAND_DDP_CHIP0, this->base + ONENAND_REG_START_ADDRESS2);
boundary = 1;
} else
boundary = 0;
@@ -770,7 +786,7 @@ static int onenand_read(struct mtd_info *mtd, loff_t from, size_t len,
break;
/* Set up for next read from bufferRAM */
if (unlikely(boundary))
- this->write_word(0x8000, this->base + ONENAND_REG_START_ADDRESS2);
+ this->write_word(ONENAND_DDP_CHIP1, this->base + ONENAND_REG_START_ADDRESS2);
ONENAND_SET_NEXT_BUFFERRAM(this);
buf += thislen;
thislen = min_t(int, mtd->writesize, len - read);
@@ -801,20 +817,59 @@ static int onenand_read(struct mtd_info *mtd, loff_t from, size_t len,
}
/**
+ * onenand_transfer_auto_oob - [Internal] oob auto-placement transfer
+ * @param mtd MTD device structure
+ * @param buf destination address
+ * @param column oob offset to read from
+ * @param thislen oob length to read
+ */
+static int onenand_transfer_auto_oob(struct mtd_info *mtd, uint8_t *buf, int column,
+ int thislen)
+{
+ struct onenand_chip *this = mtd->priv;
+ struct nand_oobfree *free;
+ int readcol = column;
+ int readend = column + thislen;
+ int lastgap = 0;
+ uint8_t *oob_buf = this->page_buf + mtd->writesize;
+
+ for (free = this->ecclayout->oobfree; free->length; ++free) {
+ if (readcol >= lastgap)
+ readcol += free->offset - lastgap;
+ if (readend >= lastgap)
+ readend += free->offset - lastgap;
+ lastgap = free->offset + free->length;
+ }
+ this->read_bufferram(mtd, ONENAND_SPARERAM, oob_buf, 0, mtd->oobsize);
+ for (free = this->ecclayout->oobfree; free->length; ++free) {
+ int free_end = free->offset + free->length;
+ if (free->offset < readend && free_end > readcol) {
+ int st = max_t(int,free->offset,readcol);
+ int ed = min_t(int,free_end,readend);
+ int n = ed - st;
+ memcpy(buf, oob_buf + st, n);
+ buf += n;
+ }
+ }
+ return 0;
+}
+
+/**
* onenand_do_read_oob - [MTD Interface] OneNAND read out-of-band
* @param mtd MTD device structure
* @param from offset to read from
* @param len number of bytes to read
* @param retlen pointer to variable to store the number of read bytes
* @param buf the databuffer to put data
+ * @param mode operation mode
*
* OneNAND read out-of-band data from the spare area
*/
-int onenand_do_read_oob(struct mtd_info *mtd, loff_t from, size_t len,
- size_t *retlen, u_char *buf)
+static int onenand_do_read_oob(struct mtd_info *mtd, loff_t from, size_t len,
+ size_t *retlen, u_char *buf, mtd_oob_mode_t mode)
{
struct onenand_chip *this = mtd->priv;
- int read = 0, thislen, column;
+ int read = 0, thislen, column, oobsize;
int ret = 0;
DEBUG(MTD_DEBUG_LEVEL3, "onenand_read_oob: from = 0x%08x, len = %i\n", (unsigned int) from, (int) len);
@@ -822,21 +877,33 @@ int onenand_do_read_oob(struct mtd_info *mtd, loff_t from, size_t len,
/* Initialize return length value */
*retlen = 0;
+ if (mode == MTD_OOB_AUTO)
+ oobsize = this->ecclayout->oobavail;
+ else
+ oobsize = mtd->oobsize;
+
+ column = from & (mtd->oobsize - 1);
+
+ if (unlikely(column >= oobsize)) {
+ printk(KERN_ERR "onenand_read_oob: Attempted to start read outside oob\n");
+ return -EINVAL;
+ }
+
/* Do not allow reads past end of device */
- if (unlikely((from + len) > mtd->size)) {
- DEBUG(MTD_DEBUG_LEVEL0, "onenand_read_oob: Attempt read beyond end of device\n");
+ if (unlikely(from >= mtd->size ||
+ column + len > ((mtd->size >> this->page_shift) -
+ (from >> this->page_shift)) * oobsize)) {
+ printk(KERN_ERR "onenand_read_oob: Attempted to read beyond end of device\n");
return -EINVAL;
}
/* Grab the lock and see if the device is available */
onenand_get_device(mtd, FL_READING);
- column = from & (mtd->oobsize - 1);
-
while (read < len) {
cond_resched();
- thislen = mtd->oobsize - column;
+ thislen = oobsize - column;
thislen = min_t(int, thislen, len);
this->command(mtd, ONENAND_CMD_READOOB, from, mtd->oobsize);
@@ -846,11 +913,14 @@ int onenand_do_read_oob(struct mtd_info *mtd, loff_t from, size_t len,
ret = this->wait(mtd, FL_READING);
/* First copy data and check return value for ECC handling */
- this->read_bufferram(mtd, ONENAND_SPARERAM, buf, column, thislen);
+ if (mode == MTD_OOB_AUTO)
+ onenand_transfer_auto_oob(mtd, buf, column, thislen);
+ else
+ this->read_bufferram(mtd, ONENAND_SPARERAM, buf, column, thislen);
if (ret) {
- DEBUG(MTD_DEBUG_LEVEL0, "onenand_read_oob: read failed = 0x%x\n", ret);
- goto out;
+ printk(KERN_ERR "onenand_read_oob: read failed = 0x%x\n", ret);
+ break;
}
read += thislen;
@@ -868,7 +938,6 @@ int onenand_do_read_oob(struct mtd_info *mtd, loff_t from, size_t len,
}
}
-out:
/* Deselect and wake up anyone waiting on the device */
onenand_release_device(mtd);
@@ -885,10 +954,132 @@ out:
static int onenand_read_oob(struct mtd_info *mtd, loff_t from,
struct mtd_oob_ops *ops)
{
- BUG_ON(ops->mode != MTD_OOB_PLACE);
-
+ switch (ops->mode) {
+ case MTD_OOB_PLACE:
+ case MTD_OOB_AUTO:
+ break;
+ case MTD_OOB_RAW:
+ /* Not implemented yet */
+ default:
+ return -EINVAL;
+ }
return onenand_do_read_oob(mtd, from + ops->ooboffs, ops->ooblen,
- &ops->oobretlen, ops->oobbuf);
+ &ops->oobretlen, ops->oobbuf, ops->mode);
+}
+
+/**
+ * onenand_bbt_wait - [DEFAULT] wait until the command is done
+ * @param mtd MTD device structure
+ * @param state state to select the max. timeout value
+ *
+ * Wait for command done.
+ */
+static int onenand_bbt_wait(struct mtd_info *mtd, int state)
+{
+ struct onenand_chip *this = mtd->priv;
+ unsigned long timeout;
+ unsigned int interrupt;
+ unsigned int ctrl;
+
+ /* The 20 msec is enough */
+ timeout = jiffies + msecs_to_jiffies(20);
+ while (time_before(jiffies, timeout)) {
+ interrupt = this->read_word(this->base + ONENAND_REG_INTERRUPT);
+ if (interrupt & ONENAND_INT_MASTER)
+ break;
+ }
+ /* To get correct interrupt status in timeout case */
+ interrupt = this->read_word(this->base + ONENAND_REG_INTERRUPT);
+ ctrl = this->read_word(this->base + ONENAND_REG_CTRL_STATUS);
+
+ if (ctrl & ONENAND_CTRL_ERROR) {
+ printk(KERN_DEBUG "onenand_bbt_wait: controller error = 0x%04x\n", ctrl);
+ /* Initial bad block case */
+ if (ctrl & ONENAND_CTRL_LOAD)
+ return ONENAND_BBT_READ_ERROR;
+ return ONENAND_BBT_READ_FATAL_ERROR;
+ }
+
+ if (interrupt & ONENAND_INT_READ) {
+ int ecc = this->read_word(this->base + ONENAND_REG_ECC_STATUS);
+ if (ecc & ONENAND_ECC_2BIT_ALL)
+ return ONENAND_BBT_READ_ERROR;
+ } else {
+ printk(KERN_ERR "onenand_bbt_wait: read timeout!"
+ "ctrl=0x%04x intr=0x%04x\n", ctrl, interrupt);
+ return ONENAND_BBT_READ_FATAL_ERROR;
+ }
+
+ return 0;
+}
+
+/**
+ * onenand_bbt_read_oob - [MTD Interface] OneNAND read out-of-band for bbt scan
+ * @param mtd MTD device structure
+ * @param from offset to read from
+ * @param @ops oob operation description structure
+ *
+ * OneNAND read out-of-band data from the spare area for bbt scan
+ */
+int onenand_bbt_read_oob(struct mtd_info *mtd, loff_t from,
+ struct mtd_oob_ops *ops)
+{
+ struct onenand_chip *this = mtd->priv;
+ int read = 0, thislen, column;
+ int ret = 0;
+ size_t len = ops->ooblen;
+ u_char *buf = ops->oobbuf;
+
+ DEBUG(MTD_DEBUG_LEVEL3, "onenand_bbt_read_oob: from = 0x%08x, len = %zi\n", (unsigned int) from, len);
+
+ /* Initialize return value */
+ ops->oobretlen = 0;
+
+ /* Do not allow reads past end of device */
+ if (unlikely((from + len) > mtd->size)) {
+ printk(KERN_ERR "onenand_bbt_read_oob: Attempt read beyond end of device\n");
+ return ONENAND_BBT_READ_FATAL_ERROR;
+ }
+
+ /* Grab the lock and see if the device is available */
+ onenand_get_device(mtd, FL_READING);
+
+ column = from & (mtd->oobsize - 1);
+
+ while (read < len) {
+ cond_resched();
+
+ thislen = mtd->oobsize - column;
+ thislen = min_t(int, thislen, len);
+
+ this->command(mtd, ONENAND_CMD_READOOB, from, mtd->oobsize);
+
+ onenand_update_bufferram(mtd, from, 0);
+
+ ret = onenand_bbt_wait(mtd, FL_READING);
+ if (ret)
+ break;
+
+ this->read_bufferram(mtd, ONENAND_SPARERAM, buf, column, thislen);
+ read += thislen;
+ if (read == len)
+ break;
+
+ buf += thislen;
+
+ /* Read more? */
+ if (read < len) {
+ /* Update Page size */
+ from += mtd->writesize;
+ column = 0;
+ }
+ }
+
+ /* Deselect and wake up anyone waiting on the device */
+ onenand_release_device(mtd);
+
+ ops->oobretlen = read;
+ return ret;
}
#ifdef CONFIG_MTD_ONENAND_VERIFY_WRITE
@@ -897,14 +1088,12 @@ static int onenand_read_oob(struct mtd_info *mtd, loff_t from,
* @param mtd MTD device structure
* @param buf the databuffer to verify
* @param to offset to read from
- * @param len number of bytes to read and compare
*
*/
-static int onenand_verify_oob(struct mtd_info *mtd, const u_char *buf, loff_t to, int len)
+static int onenand_verify_oob(struct mtd_info *mtd, const u_char *buf, loff_t to)
{
struct onenand_chip *this = mtd->priv;
- char *readp = this->page_buf;
- int column = to & (mtd->oobsize - 1);
+ char *readp = this->page_buf + mtd->writesize;
int status, i;
this->command(mtd, ONENAND_CMD_READOOB, to, mtd->oobsize);
@@ -913,9 +1102,8 @@ static int onenand_verify_oob(struct mtd_info *mtd, const u_char *buf, loff_t to
if (status)
return status;
- this->read_bufferram(mtd, ONENAND_SPARERAM, readp, column, len);
-
- for(i = 0; i < len; i++)
+ this->read_bufferram(mtd, ONENAND_SPARERAM, readp, 0, mtd->oobsize);
+ for(i = 0; i < mtd->oobsize; i++)
if (buf[i] != 0xFF && buf[i] != readp[i])
return -EBADMSG;
@@ -923,41 +1111,51 @@ static int onenand_verify_oob(struct mtd_info *mtd, const u_char *buf, loff_t to
}
/**
- * onenand_verify_page - [GENERIC] verify the chip contents after a write
- * @param mtd MTD device structure
- * @param buf the databuffer to verify
+ * onenand_verify - [GENERIC] verify the chip contents after a write
+ * @param mtd MTD device structure
+ * @param buf the databuffer to verify
+ * @param addr offset to read from
+ * @param len number of bytes to read and compare
*
- * Check DataRAM area directly
*/
-static int onenand_verify_page(struct mtd_info *mtd, u_char *buf, loff_t addr)
+static int onenand_verify(struct mtd_info *mtd, const u_char *buf, loff_t addr, size_t len)
{
struct onenand_chip *this = mtd->priv;
- void __iomem *dataram0, *dataram1;
+ void __iomem *dataram;
int ret = 0;
+ int thislen, column;
- /* In partial page write, just skip it */
- if ((addr & (mtd->writesize - 1)) != 0)
- return 0;
+ while (len != 0) {
+ thislen = min_t(int, mtd->writesize, len);
+ column = addr & (mtd->writesize - 1);
+ if (column + thislen > mtd->writesize)
+ thislen = mtd->writesize - column;
- this->command(mtd, ONENAND_CMD_READ, addr, mtd->writesize);
+ this->command(mtd, ONENAND_CMD_READ, addr, mtd->writesize);
- ret = this->wait(mtd, FL_READING);
- if (ret)
- return ret;
+ onenand_update_bufferram(mtd, addr, 0);
+
+ ret = this->wait(mtd, FL_READING);
+ if (ret)
+ return ret;
- onenand_update_bufferram(mtd, addr, 1);
+ onenand_update_bufferram(mtd, addr, 1);
- /* Check, if the two dataram areas are same */
- dataram0 = this->base + ONENAND_DATARAM;
- dataram1 = dataram0 + mtd->writesize;
+ dataram = this->base + ONENAND_DATARAM;
+ dataram += onenand_bufferram_offset(mtd, ONENAND_DATARAM);
- if (memcmp(dataram0, dataram1, mtd->writesize))
- return -EBADMSG;
+ if (memcmp(buf, dataram + column, thislen))
+ return -EBADMSG;
+
+ len -= thislen;
+ buf += thislen;
+ addr += thislen;
+ }
return 0;
}
#else
-#define onenand_verify_page(...) (0)
+#define onenand_verify(...) (0)
#define onenand_verify_oob(...) (0)
#endif
@@ -988,60 +1186,57 @@ static int onenand_write(struct mtd_info *mtd, loff_t to, size_t len,
/* Do not allow writes past end of device */
if (unlikely((to + len) > mtd->size)) {
- DEBUG(MTD_DEBUG_LEVEL0, "onenand_write: Attempt write to past end of device\n");
+ printk(KERN_ERR "onenand_write: Attempt write to past end of device\n");
return -EINVAL;
}
/* Reject writes, which are not page aligned */
if (unlikely(NOTALIGNED(to)) || unlikely(NOTALIGNED(len))) {
- DEBUG(MTD_DEBUG_LEVEL0, "onenand_write: Attempt to write not page aligned data\n");
+ printk(KERN_ERR "onenand_write: Attempt to write not page aligned data\n");
return -EINVAL;
}
column = to & (mtd->writesize - 1);
- subpage = column || (len & (mtd->writesize - 1));
/* Grab the lock and see if the device is available */
onenand_get_device(mtd, FL_WRITING);
/* Loop until all data write */
while (written < len) {
- int bytes = mtd->writesize;
- int thislen = min_t(int, bytes, len - written);
+ int thislen = min_t(int, mtd->writesize - column, len - written);
u_char *wbuf = (u_char *) buf;
cond_resched();
- this->command(mtd, ONENAND_CMD_BUFFERRAM, to, bytes);
+ this->command(mtd, ONENAND_CMD_BUFFERRAM, to, thislen);
/* Partial page write */
+ subpage = thislen < mtd->writesize;
if (subpage) {
- bytes = min_t(int, bytes - column, (int) len);
memset(this->page_buf, 0xff, mtd->writesize);
- memcpy(this->page_buf + column, buf, bytes);
+ memcpy(this->page_buf + column, buf, thislen);
wbuf = this->page_buf;
- /* Even though partial write, we need page size */
- thislen = mtd->writesize;
}
- this->write_bufferram(mtd, ONENAND_DATARAM, wbuf, 0, thislen);
+ this->write_bufferram(mtd, ONENAND_DATARAM, wbuf, 0, mtd->writesize);
this->write_bufferram(mtd, ONENAND_SPARERAM, ffchars, 0, mtd->oobsize);
this->command(mtd, ONENAND_CMD_PROG, to, mtd->writesize);
+ ret = this->wait(mtd, FL_WRITING);
+
/* In partial page write we don't update bufferram */
- onenand_update_bufferram(mtd, to, !subpage);
+ onenand_update_bufferram(mtd, to, !ret && !subpage);
- ret = this->wait(mtd, FL_WRITING);
if (ret) {
- DEBUG(MTD_DEBUG_LEVEL0, "onenand_write: write filaed %d\n", ret);
+ printk(KERN_ERR "onenand_write: write filaed %d\n", ret);
break;
}
/* Only check verify write turn on */
- ret = onenand_verify_page(mtd, (u_char *) wbuf, to);
+ ret = onenand_verify(mtd, (u_char *) wbuf, to, thislen);
if (ret) {
- DEBUG(MTD_DEBUG_LEVEL0, "onenand_write: verify failed %d\n", ret);
+ printk(KERN_ERR "onenand_write: verify failed %d\n", ret);
break;
}
@@ -1064,20 +1259,58 @@ static int onenand_write(struct mtd_info *mtd, loff_t to, size_t len,
}
/**
+ * onenand_fill_auto_oob - [Internal] oob auto-placement transfer
+ * @param mtd MTD device structure
+ * @param oob_buf oob buffer
+ * @param buf source address
+ * @param column oob offset to write to
+ * @param thislen oob length to write
+ */
+static int onenand_fill_auto_oob(struct mtd_info *mtd, u_char *oob_buf,
+ const u_char *buf, int column, int thislen)
+{
+ struct onenand_chip *this = mtd->priv;
+ struct nand_oobfree *free;
+ int writecol = column;
+ int writeend = column + thislen;
+ int lastgap = 0;
+
+ for (free = this->ecclayout->oobfree; free->length; ++free) {
+ if (writecol >= lastgap)
+ writecol += free->offset - lastgap;
+ if (writeend >= lastgap)
+ writeend += free->offset - lastgap;
+ lastgap = free->offset + free->length;
+ }
+ for (free = this->ecclayout->oobfree; free->length; ++free) {
+ int free_end = free->offset + free->length;
+ if (free->offset < writeend && free_end > writecol) {
+ int st = max_t(int,free->offset,writecol);
+ int ed = min_t(int,free_end,writeend);
+ int n = ed - st;
+ memcpy(oob_buf + st, buf, n);
+ buf += n;
+ }
+ }
+ return 0;
+}
+
+/**
* onenand_do_write_oob - [Internal] OneNAND write out-of-band
* @param mtd MTD device structure
* @param to offset to write to
* @param len number of bytes to write
* @param retlen pointer to variable to store the number of written bytes
* @param buf the data to write
+ * @param mode operation mode
*
* OneNAND write out-of-band
*/
static int onenand_do_write_oob(struct mtd_info *mtd, loff_t to, size_t len,
- size_t *retlen, const u_char *buf)
+ size_t *retlen, const u_char *buf, mtd_oob_mode_t mode)
{
struct onenand_chip *this = mtd->priv;
- int column, ret = 0;
+ int column, ret = 0, oobsize;
int written = 0;
DEBUG(MTD_DEBUG_LEVEL3, "onenand_write_oob: to = 0x%08x, len = %i\n", (unsigned int) to, (int) len);
@@ -1085,9 +1318,30 @@ static int onenand_do_write_oob(struct mtd_info *mtd, loff_t to, size_t len,
/* Initialize retlen, in case of early exit */
*retlen = 0;
- /* Do not allow writes past end of device */
- if (unlikely((to + len) > mtd->size)) {
- DEBUG(MTD_DEBUG_LEVEL0, "onenand_write_oob: Attempt write to past end of device\n");
+ if (mode == MTD_OOB_AUTO)
+ oobsize = this->ecclayout->oobavail;
+ else
+ oobsize = mtd->oobsize;
+
+ column = to & (mtd->oobsize - 1);
+
+ if (unlikely(column >= oobsize)) {
+ printk(KERN_ERR "onenand_write_oob: Attempted to start write outside oob\n");
+ return -EINVAL;
+ }
+
+ /* For compatibility with NAND: Do not allow write past end of page */
+ if (column + len > oobsize) {
+ printk(KERN_ERR "onenand_write_oob: "
+ "Attempt to write past end of page\n");
+ return -EINVAL;
+ }
+
+ /* Do not allow reads past end of device */
+ if (unlikely(to >= mtd->size ||
+ column + len > ((mtd->size >> this->page_shift) -
+ (to >> this->page_shift)) * oobsize)) {
+ printk(KERN_ERR "onenand_write_oob: Attempted to write past end of device\n");
return -EINVAL;
}
@@ -1096,18 +1350,19 @@ static int onenand_do_write_oob(struct mtd_info *mtd, loff_t to, size_t len,
/* Loop until all data write */
while (written < len) {
- int thislen = min_t(int, mtd->oobsize, len - written);
+ int thislen = min_t(int, oobsize, len - written);
cond_resched();
- column = to & (mtd->oobsize - 1);
-
this->command(mtd, ONENAND_CMD_BUFFERRAM, to, mtd->oobsize);
/* We send data to spare ram with oobsize
* to prevent byte access */
memset(this->page_buf, 0xff, mtd->oobsize);
- memcpy(this->page_buf + column, buf, thislen);
+ if (mode == MTD_OOB_AUTO)
+ onenand_fill_auto_oob(mtd, this->page_buf, buf, column, thislen);
+ else
+ memcpy(this->page_buf + column, buf, thislen);
this->write_bufferram(mtd, ONENAND_SPARERAM, this->page_buf, 0, mtd->oobsize);
this->command(mtd, ONENAND_CMD_PROGOOB, to, mtd->oobsize);
@@ -1116,26 +1371,25 @@ static int onenand_do_write_oob(struct mtd_info *mtd, loff_t to, size_t len,
ret = this->wait(mtd, FL_WRITING);
if (ret) {
- DEBUG(MTD_DEBUG_LEVEL0, "onenand_write_oob: write filaed %d\n", ret);
- goto out;
+ printk(KERN_ERR "onenand_write_oob: write failed %d\n", ret);
+ break;
}
- ret = onenand_verify_oob(mtd, buf, to, thislen);
+ ret = onenand_verify_oob(mtd, this->page_buf, to);
if (ret) {
- DEBUG(MTD_DEBUG_LEVEL0, "onenand_write_oob: verify failed %d\n", ret);
- goto out;
+ printk(KERN_ERR "onenand_write_oob: verify failed %d\n", ret);
+ break;
}
written += thislen;
-
if (written == len)
break;
- to += thislen;
+ to += mtd->writesize;
buf += thislen;
+ column = 0;
}
-out:
/* Deselect and wake up anyone waiting on the device */
onenand_release_device(mtd);
@@ -1153,10 +1407,17 @@ out:
static int onenand_write_oob(struct mtd_info *mtd, loff_t to,
struct mtd_oob_ops *ops)
{
- BUG_ON(ops->mode != MTD_OOB_PLACE);
-
+ switch (ops->mode) {
+ case MTD_OOB_PLACE:
+ case MTD_OOB_AUTO:
+ break;
+ case MTD_OOB_RAW:
+ /* Not implemented yet */
+ default:
+ return -EINVAL;
+ }
return onenand_do_write_oob(mtd, to + ops->ooboffs, ops->ooblen,
- &ops->oobretlen, ops->oobbuf);
+ &ops->oobretlen, ops->oobbuf, ops->mode);
}
/**
@@ -1199,19 +1460,19 @@ static int onenand_erase(struct mtd_info *mtd, struct erase_info *instr)
/* Start address must align on block boundary */
if (unlikely(instr->addr & (block_size - 1))) {
- DEBUG(MTD_DEBUG_LEVEL0, "onenand_erase: Unaligned address\n");
+ printk(KERN_ERR "onenand_erase: Unaligned address\n");
return -EINVAL;
}
/* Length must align on block boundary */
if (unlikely(instr->len & (block_size - 1))) {
- DEBUG(MTD_DEBUG_LEVEL0, "onenand_erase: Length not block aligned\n");
+ printk(KERN_ERR "onenand_erase: Length not block aligned\n");
return -EINVAL;
}
/* Do not allow erase past end of device */
if (unlikely((instr->len + instr->addr) > mtd->size)) {
- DEBUG(MTD_DEBUG_LEVEL0, "onenand_erase: Erase past end of device\n");
+ printk(KERN_ERR "onenand_erase: Erase past end of device\n");
return -EINVAL;
}
@@ -1238,10 +1499,12 @@ static int onenand_erase(struct mtd_info *mtd, struct erase_info *instr)
this->command(mtd, ONENAND_CMD_ERASE, addr, block_size);
+ onenand_invalidate_bufferram(mtd, addr, block_size);
+
ret = this->wait(mtd, FL_ERASING);
/* Check, if it is write protected */
if (ret) {
- DEBUG(MTD_DEBUG_LEVEL0, "onenand_erase: Failed erase, block %d\n", (unsigned) (addr >> this->erase_shift));
+ printk(KERN_ERR "onenand_erase: Failed erase, block %d\n", (unsigned) (addr >> this->erase_shift));
instr->state = MTD_ERASE_FAILED;
instr->fail_addr = addr;
goto erase_exit;
@@ -1322,7 +1585,7 @@ static int onenand_default_block_markbad(struct mtd_info *mtd, loff_t ofs)
/* We write two bytes, so we dont have to mess with 16 bit access */
ofs += mtd->oobsize + (bbm->badblockpos & ~0x01);
- return onenand_do_write_oob(mtd, ofs , 2, &retlen, buf);
+ return onenand_do_write_oob(mtd, ofs , 2, &retlen, buf, MTD_OOB_PLACE);
}
/**
@@ -1491,6 +1754,8 @@ static int onenand_unlock_all(struct mtd_info *mtd)
struct onenand_chip *this = mtd->priv;
if (this->options & ONENAND_HAS_UNLOCK_ALL) {
+ /* Set start block address */
+ this->write_word(0, this->base + ONENAND_REG_START_BLOCK_ADDRESS);
/* Write unlock command */
this->command(mtd, ONENAND_CMD_UNLOCK_ALL, 0, 0);
@@ -1503,13 +1768,10 @@ static int onenand_unlock_all(struct mtd_info *mtd)
continue;
/* Workaround for all block unlock in DDP */
- if (this->device_id & ONENAND_DEVICE_IS_DDP) {
- loff_t ofs;
- size_t len;
-
+ if (ONENAND_IS_DDP(this)) {
/* 1st block on another chip */
- ofs = this->chipsize >> 1;
- len = 1 << this->erase_shift;
+ loff_t ofs = this->chipsize >> 1;
+ size_t len = mtd->erasesize;
onenand_unlock(mtd, ofs, len);
}
@@ -1617,7 +1879,7 @@ static int do_otp_lock(struct mtd_info *mtd, loff_t from, size_t len,
this->command(mtd, ONENAND_CMD_OTP_ACCESS, 0, 0);
this->wait(mtd, FL_OTPING);
- ret = onenand_do_write_oob(mtd, from, len, retlen, buf);
+ ret = onenand_do_write_oob(mtd, from, len, retlen, buf, MTD_OOB_PLACE);
/* Exit OTP access mode */
this->command(mtd, ONENAND_CMD_RESET, 0, 0);
@@ -1823,12 +2085,13 @@ static int onenand_lock_user_prot_reg(struct mtd_info *mtd, loff_t from,
#endif /* CONFIG_MTD_ONENAND_OTP */
/**
- * onenand_lock_scheme - Check and set OneNAND lock scheme
+ * onenand_check_features - Check and set OneNAND features
* @param mtd MTD data structure
*
- * Check and set OneNAND lock scheme
+ * Check and set OneNAND features
+ * - lock scheme
*/
-static void onenand_lock_scheme(struct mtd_info *mtd)
+static void onenand_check_features(struct mtd_info *mtd)
{
struct onenand_chip *this = mtd->priv;
unsigned int density, process;
@@ -1961,26 +2224,28 @@ static int onenand_probe(struct mtd_info *mtd)
density = dev_id >> ONENAND_DEVICE_DENSITY_SHIFT;
this->chipsize = (16 << density) << 20;
/* Set density mask. it is used for DDP */
- this->density_mask = (1 << (density + 6));
+ if (ONENAND_IS_DDP(this))
+ this->density_mask = (1 << (density + 6));
+ else
+ this->density_mask = 0;
/* OneNAND page size & block size */
/* The data buffer size is equal to page size */
mtd->writesize = this->read_word(this->base + ONENAND_REG_DATA_BUFFER_SIZE);
mtd->oobsize = mtd->writesize >> 5;
- /* Pagers per block is always 64 in OneNAND */
+ /* Pages per a block are always 64 in OneNAND */
mtd->erasesize = mtd->writesize << 6;
this->erase_shift = ffs(mtd->erasesize) - 1;
this->page_shift = ffs(mtd->writesize) - 1;
- this->ppb_shift = (this->erase_shift - this->page_shift);
- this->page_mask = (mtd->erasesize / mtd->writesize) - 1;
+ this->page_mask = (1 << (this->erase_shift - this->page_shift)) - 1;
/* REVIST: Multichip handling */
mtd->size = this->chipsize;
- /* Check OneNAND lock scheme */
- onenand_lock_scheme(mtd);
+ /* Check OneNAND features */
+ onenand_check_features(mtd);
return 0;
}
@@ -2021,6 +2286,7 @@ static void onenand_resume(struct mtd_info *mtd)
*/
int onenand_scan(struct mtd_info *mtd, int maxchips)
{
+ int i;
struct onenand_chip *this = mtd->priv;
if (!this->read_word)
@@ -2092,12 +2358,21 @@ int onenand_scan(struct mtd_info *mtd, int maxchips)
}
this->subpagesize = mtd->writesize >> mtd->subpage_sft;
+
+ /*
+ * The number of bytes available for a client to place data into
+ * the out of band area
+ */
+ this->ecclayout->oobavail = 0;
+ for (i = 0; this->ecclayout->oobfree[i].length; i++)
+ this->ecclayout->oobavail +=
+ this->ecclayout->oobfree[i].length;
+
mtd->ecclayout = this->ecclayout;
/* Fill in remaining MTD driver data */
mtd->type = MTD_NANDFLASH;
mtd->flags = MTD_CAP_NANDFLASH;
- mtd->ecctype = MTD_ECC_SW;
mtd->erase = onenand_erase;
mtd->point = NULL;
mtd->unpoint = NULL;
@@ -2144,8 +2419,11 @@ void onenand_release(struct mtd_info *mtd)
del_mtd_device (mtd);
/* Free bad block table memory, if allocated */
- if (this->bbm)
+ if (this->bbm) {
+ struct bbm_info *bbm = this->bbm;
+ kfree(bbm->bbt);
kfree(this->bbm);
+ }
/* Buffer allocated by onenand_scan */
if (this->options & ONENAND_PAGEBUF_ALLOC)
kfree(this->page_buf);
diff --git a/drivers/mtd/onenand/onenand_bbt.c b/drivers/mtd/onenand/onenand_bbt.c
index 98f8fd1c6375..aecdd50a1781 100644
--- a/drivers/mtd/onenand/onenand_bbt.c
+++ b/drivers/mtd/onenand/onenand_bbt.c
@@ -17,8 +17,8 @@
#include <linux/mtd/onenand.h>
#include <linux/mtd/compatmac.h>
-extern int onenand_do_read_oob(struct mtd_info *mtd, loff_t from, size_t len,
- size_t *retlen, u_char *buf);
+extern int onenand_bbt_read_oob(struct mtd_info *mtd, loff_t from,
+ struct mtd_oob_ops *ops);
/**
* check_short_pattern - [GENERIC] check if a pattern is in the buffer
@@ -65,10 +65,11 @@ static int create_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr
int startblock;
loff_t from;
size_t readlen, ooblen;
+ struct mtd_oob_ops ops;
printk(KERN_INFO "Scanning device for bad blocks\n");
- len = 1;
+ len = 2;
/* We need only read few bytes from the OOB area */
scanlen = ooblen = 0;
@@ -82,22 +83,24 @@ static int create_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr
startblock = 0;
from = 0;
+ ops.mode = MTD_OOB_PLACE;
+ ops.ooblen = readlen;
+ ops.oobbuf = buf;
+ ops.len = ops.ooboffs = ops.retlen = ops.oobretlen = 0;
+
for (i = startblock; i < numblocks; ) {
int ret;
for (j = 0; j < len; j++) {
- size_t retlen;
-
/* No need to read pages fully,
* just read required OOB bytes */
- ret = onenand_do_read_oob(mtd, from + j * mtd->writesize + bd->offs,
- readlen, &retlen, &buf[0]);
+ ret = onenand_bbt_read_oob(mtd, from + j * mtd->writesize + bd->offs, &ops);
/* If it is a initial bad block, just ignore it */
- if (ret && !(ret & ONENAND_CTRL_LOAD))
- return ret;
+ if (ret == ONENAND_BBT_READ_FATAL_ERROR)
+ return -EIO;
- if (check_short_pattern(&buf[j * scanlen], scanlen, mtd->writesize, bd)) {
+ if (ret || check_short_pattern(&buf[j * scanlen], scanlen, mtd->writesize, bd)) {
bbm->bbt[i >> 3] |= 0x03 << (i & 0x6);
printk(KERN_WARNING "Bad eraseblock %d at 0x%08x\n",
i >> 1, (unsigned int) from);
@@ -168,8 +171,8 @@ static int onenand_isbad_bbt(struct mtd_info *mtd, loff_t offs, int allowbbt)
* marked good / bad blocks and writes the bad block table(s) to
* the selected place.
*
- * The bad block table memory is allocated here. It must be freed
- * by calling the onenand_free_bbt function.
+ * The bad block table memory is allocated here. It is freed
+ * by the onenand_release function.
*
*/
int onenand_scan_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd)
diff --git a/drivers/mtd/redboot.c b/drivers/mtd/redboot.c
index 035cd9b0cc08..a61351f88ec0 100644
--- a/drivers/mtd/redboot.c
+++ b/drivers/mtd/redboot.c
@@ -94,8 +94,19 @@ static int parse_redboot_partitions(struct mtd_info *master,
* (NOTE: this is 'size' not 'data_length'; size is
* the full size of the entry.)
*/
- if (swab32(buf[i].size) == master->erasesize) {
+
+ /* RedBoot can combine the FIS directory and
+ config partitions into a single eraseblock;
+ we assume wrong-endian if either the swapped
+ 'size' matches the eraseblock size precisely,
+ or if the swapped size actually fits in an
+ eraseblock while the unswapped size doesn't. */
+ if (swab32(buf[i].size) == master->erasesize ||
+ (buf[i].size > master->erasesize
+ && swab32(buf[i].size) < master->erasesize)) {
int j;
+ /* Update numslots based on actual FIS directory size */
+ numslots = swab32(buf[i].size) / sizeof (struct fis_image_desc);
for (j = 0; j < numslots; ++j) {
/* A single 0xff denotes a deleted entry.
@@ -120,11 +131,11 @@ static int parse_redboot_partitions(struct mtd_info *master,
swab32s(&buf[j].desc_cksum);
swab32s(&buf[j].file_cksum);
}
+ } else if (buf[i].size < master->erasesize) {
+ /* Update numslots based on actual FIS directory size */
+ numslots = buf[i].size / sizeof(struct fis_image_desc);
}
break;
- } else {
- /* re-calculate of real numslots */
- numslots = buf[i].size / sizeof(struct fis_image_desc);
}
}
if (i == numslots) {
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-17 22:40:59 +0100