diff options
Diffstat (limited to 'drivers')
391 files changed, 22063 insertions, 9121 deletions
diff --git a/drivers/accessibility/braille/braille_console.c b/drivers/accessibility/braille/braille_console.c index d672cfe7ca59..cb423f5aef24 100644 --- a/drivers/accessibility/braille/braille_console.c +++ b/drivers/accessibility/braille/braille_console.c @@ -21,7 +21,6 @@ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ -#include <linux/autoconf.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/moduleparam.h> diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 1683ebda900b..f4ea5a8c325b 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -3022,7 +3022,7 @@ static inline ata_xlat_func_t ata_get_xlat_func(struct ata_device *dev, u8 cmd) case WRITE_16: return ata_scsi_rw_xlat; - case 0x93 /*WRITE_SAME_16*/: + case WRITE_SAME_16: return ata_scsi_write_same_xlat; case SYNCHRONIZE_CACHE: diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index efa8773bef5a..741065c9da67 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -2275,7 +2275,7 @@ void ata_sff_drain_fifo(struct ata_queued_cmd *qc) ap = qc->ap; /* Drain up to 64K of data before we give up this recovery method */ for (count = 0; (ap->ops->sff_check_status(ap) & ATA_DRQ) - && count < 32768; count++) + && count < 65536; count += 2) ioread16(ap->ioaddr.data_addr); /* Can become DEBUG later */ diff --git a/drivers/ata/pata_bf54x.c b/drivers/ata/pata_bf54x.c index c4b47a3e5446..02c81f12c702 100644 --- a/drivers/ata/pata_bf54x.c +++ b/drivers/ata/pata_bf54x.c @@ -1557,6 +1557,25 @@ static unsigned short atapi_io_port[] = { P_ATAPI_DMARQ, P_ATAPI_INTRQ, P_ATAPI_IORDY, + P_ATAPI_D0A, + P_ATAPI_D1A, + P_ATAPI_D2A, + P_ATAPI_D3A, + P_ATAPI_D4A, + P_ATAPI_D5A, + P_ATAPI_D6A, + P_ATAPI_D7A, + P_ATAPI_D8A, + P_ATAPI_D9A, + P_ATAPI_D10A, + P_ATAPI_D11A, + P_ATAPI_D12A, + P_ATAPI_D13A, + P_ATAPI_D14A, + P_ATAPI_D15A, + P_ATAPI_A0A, + P_ATAPI_A1A, + P_ATAPI_A2A, 0 }; diff --git a/drivers/ata/pata_cmd64x.c b/drivers/ata/pata_cmd64x.c index dadfc358ba1c..0efb1f58f255 100644 --- a/drivers/ata/pata_cmd64x.c +++ b/drivers/ata/pata_cmd64x.c @@ -31,7 +31,7 @@ #include <linux/libata.h> #define DRV_NAME "pata_cmd64x" -#define DRV_VERSION "0.3.1" +#define DRV_VERSION "0.2.5" /* * CMD64x specific registers definition. @@ -219,7 +219,7 @@ static void cmd64x_set_dmamode(struct ata_port *ap, struct ata_device *adev) regU |= udma_data[adev->dma_mode - XFER_UDMA_0] << shift; /* Merge the control bits */ regU |= 1 << adev->devno; /* UDMA on */ - if (adev->dma_mode > 2) /* 15nS timing */ + if (adev->dma_mode > XFER_UDMA_2) /* 15nS timing */ regU |= 4 << adev->devno; } else { regU &= ~ (1 << adev->devno); /* UDMA off */ @@ -254,109 +254,17 @@ static void cmd648_bmdma_stop(struct ata_queued_cmd *qc) } /** - * cmd64x_bmdma_stop - DMA stop callback + * cmd646r1_dma_stop - DMA stop callback * @qc: Command in progress * - * Track the completion of live DMA commands and clear the - * host->private_data DMA tracking flag as we do. + * Stub for now while investigating the r1 quirk in the old driver. */ -static void cmd64x_bmdma_stop(struct ata_queued_cmd *qc) +static void cmd646r1_bmdma_stop(struct ata_queued_cmd *qc) { - struct ata_port *ap = qc->ap; ata_bmdma_stop(qc); - WARN_ON(ap->host->private_data != ap); - ap->host->private_data = NULL; -} - -/** - * cmd64x_qc_defer - Defer logic for chip limits - * @qc: queued command - * - * Decide whether we can issue the command. Called under the host lock. - */ - -static int cmd64x_qc_defer(struct ata_queued_cmd *qc) -{ - struct ata_host *host = qc->ap->host; - struct ata_port *alt = host->ports[1 ^ qc->ap->port_no]; - int rc; - int dma = 0; - - /* Apply the ATA rules first */ - rc = ata_std_qc_defer(qc); - if (rc) - return rc; - - if (qc->tf.protocol == ATAPI_PROT_DMA || - qc->tf.protocol == ATA_PROT_DMA) - dma = 1; - - /* If the other port is not live then issue the command */ - if (alt == NULL || !alt->qc_active) { - if (dma) - host->private_data = qc->ap; - return 0; - } - /* If there is a live DMA command then wait */ - if (host->private_data != NULL) - return ATA_DEFER_PORT; - if (dma) - /* Cannot overlap our DMA command */ - return ATA_DEFER_PORT; - return 0; } -/** - * cmd64x_interrupt - ATA host interrupt handler - * @irq: irq line (unused) - * @dev_instance: pointer to our ata_host information structure - * - * Our interrupt handler for PCI IDE devices. Calls - * ata_sff_host_intr() for each port that is flagging an IRQ. We cannot - * use the defaults as we need to avoid touching status/altstatus during - * a DMA. - * - * LOCKING: - * Obtains host lock during operation. - * - * RETURNS: - * IRQ_NONE or IRQ_HANDLED. - */ -irqreturn_t cmd64x_interrupt(int irq, void *dev_instance) -{ - struct ata_host *host = dev_instance; - struct pci_dev *pdev = to_pci_dev(host->dev); - unsigned int i; - unsigned int handled = 0; - unsigned long flags; - static const u8 irq_reg[2] = { CFR, ARTTIM23 }; - static const u8 irq_mask[2] = { 1 << 2, 1 << 4 }; - - /* TODO: make _irqsave conditional on x86 PCI IDE legacy mode */ - spin_lock_irqsave(&host->lock, flags); - - for (i = 0; i < host->n_ports; i++) { - struct ata_port *ap; - u8 reg; - - pci_read_config_byte(pdev, irq_reg[i], ®); - ap = host->ports[i]; - if (ap && (reg & irq_mask[i]) && - !(ap->flags & ATA_FLAG_DISABLED)) { - struct ata_queued_cmd *qc; - - qc = ata_qc_from_tag(ap, ap->link.active_tag); - if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING)) && - (qc->flags & ATA_QCFLAG_ACTIVE)) - handled |= ata_sff_host_intr(ap, qc); - } - } - - spin_unlock_irqrestore(&host->lock, flags); - - return IRQ_RETVAL(handled); -} static struct scsi_host_template cmd64x_sht = { ATA_BMDMA_SHT(DRV_NAME), }; @@ -365,8 +273,6 @@ static const struct ata_port_operations cmd64x_base_ops = { .inherits = &ata_bmdma_port_ops, .set_piomode = cmd64x_set_piomode, .set_dmamode = cmd64x_set_dmamode, - .bmdma_stop = cmd64x_bmdma_stop, - .qc_defer = cmd64x_qc_defer, }; static struct ata_port_operations cmd64x_port_ops = { @@ -376,6 +282,7 @@ static struct ata_port_operations cmd64x_port_ops = { static struct ata_port_operations cmd646r1_port_ops = { .inherits = &cmd64x_base_ops, + .bmdma_stop = cmd646r1_bmdma_stop, .cable_detect = ata_cable_40wire, }; @@ -383,7 +290,6 @@ static struct ata_port_operations cmd648_port_ops = { .inherits = &cmd64x_base_ops, .bmdma_stop = cmd648_bmdma_stop, .cable_detect = cmd648_cable_detect, - .qc_defer = ata_std_qc_defer }; static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id) @@ -432,7 +338,6 @@ static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id) const struct ata_port_info *ppi[] = { &cmd_info[id->driver_data], NULL }; u8 mrdmode; int rc; - struct ata_host *host; rc = pcim_enable_device(pdev); if (rc) @@ -450,25 +355,20 @@ static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id) ppi[0] = &cmd_info[3]; } - pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 64); pci_read_config_byte(pdev, MRDMODE, &mrdmode); mrdmode &= ~ 0x30; /* IRQ set up */ mrdmode |= 0x02; /* Memory read line enable */ pci_write_config_byte(pdev, MRDMODE, mrdmode); + /* Force PIO 0 here.. */ + /* PPC specific fixup copied from old driver */ #ifdef CONFIG_PPC pci_write_config_byte(pdev, UDIDETCR0, 0xF0); #endif - rc = ata_pci_sff_prepare_host(pdev, ppi, &host); - if (rc) - return rc; - /* We use this pointer to track the AP which has DMA running */ - host->private_data = NULL; - pci_set_master(pdev); - return ata_pci_sff_activate_host(host, cmd64x_interrupt, &cmd64x_sht); + return ata_pci_sff_init_one(pdev, ppi, &cmd64x_sht, NULL); } #ifdef CONFIG_PM diff --git a/drivers/ata/pata_hpt3x2n.c b/drivers/ata/pata_hpt3x2n.c index 9a09a1b11ca5..dd26bc73bd9a 100644 --- a/drivers/ata/pata_hpt3x2n.c +++ b/drivers/ata/pata_hpt3x2n.c @@ -8,7 +8,7 @@ * Copyright (C) 1999-2003 Andre Hedrick <andre@linux-ide.org> * Portions Copyright (C) 2001 Sun Microsystems, Inc. * Portions Copyright (C) 2003 Red Hat Inc - * Portions Copyright (C) 2005-2007 MontaVista Software, Inc. + * Portions Copyright (C) 2005-2009 MontaVista Software, Inc. * * * TODO @@ -25,7 +25,7 @@ #include <linux/libata.h> #define DRV_NAME "pata_hpt3x2n" -#define DRV_VERSION "0.3.7" +#define DRV_VERSION "0.3.8" enum { HPT_PCI_FAST = (1 << 31), @@ -264,7 +264,7 @@ static void hpt3x2n_bmdma_stop(struct ata_queued_cmd *qc) static void hpt3x2n_set_clock(struct ata_port *ap, int source) { - void __iomem *bmdma = ap->ioaddr.bmdma_addr; + void __iomem *bmdma = ap->ioaddr.bmdma_addr - ap->port_no * 8; /* Tristate the bus */ iowrite8(0x80, bmdma+0x73); @@ -274,9 +274,9 @@ static void hpt3x2n_set_clock(struct ata_port *ap, int source) iowrite8(source, bmdma+0x7B); iowrite8(0xC0, bmdma+0x79); - /* Reset state machines */ - iowrite8(0x37, bmdma+0x70); - iowrite8(0x37, bmdma+0x74); + /* Reset state machines, avoid enabling the disabled channels */ + iowrite8(ioread8(bmdma+0x70) | 0x32, bmdma+0x70); + iowrite8(ioread8(bmdma+0x74) | 0x32, bmdma+0x74); /* Complete reset */ iowrite8(0x00, bmdma+0x79); @@ -286,21 +286,10 @@ static void hpt3x2n_set_clock(struct ata_port *ap, int source) iowrite8(0x00, bmdma+0x77); } -/* Check if our partner interface is busy */ - -static int hpt3x2n_pair_idle(struct ata_port *ap) -{ - struct ata_host *host = ap->host; - struct ata_port *pair = host->ports[ap->port_no ^ 1]; - - if (pair->hsm_task_state == HSM_ST_IDLE) - return 1; - return 0; -} - static int hpt3x2n_use_dpll(struct ata_port *ap, int writing) { long flags = (long)ap->host->private_data; + /* See if we should use the DPLL */ if (writing) return USE_DPLL; /* Needed for write */ @@ -309,20 +298,35 @@ static int hpt3x2n_use_dpll(struct ata_port *ap, int writing) return 0; } +static int hpt3x2n_qc_defer(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct ata_port *alt = ap->host->ports[ap->port_no ^ 1]; + int rc, flags = (long)ap->host->private_data; + int dpll = hpt3x2n_use_dpll(ap, qc->tf.flags & ATA_TFLAG_WRITE); + + /* First apply the usual rules */ + rc = ata_std_qc_defer(qc); + if (rc != 0) + return rc; + + if ((flags & USE_DPLL) != dpll && alt->qc_active) + return ATA_DEFER_PORT; + return 0; +} + static unsigned int hpt3x2n_qc_issue(struct ata_queued_cmd *qc) { - struct ata_taskfile *tf = &qc->tf; struct ata_port *ap = qc->ap; int flags = (long)ap->host->private_data; + int dpll = hpt3x2n_use_dpll(ap, qc->tf.flags & ATA_TFLAG_WRITE); - if (hpt3x2n_pair_idle(ap)) { - int dpll = hpt3x2n_use_dpll(ap, (tf->flags & ATA_TFLAG_WRITE)); - if ((flags & USE_DPLL) != dpll) { - if (dpll == 1) - hpt3x2n_set_clock(ap, 0x21); - else - hpt3x2n_set_clock(ap, 0x23); - } + if ((flags & USE_DPLL) != dpll) { + flags &= ~USE_DPLL; + flags |= dpll; + ap->host->private_data = (void *)(long)flags; + + hpt3x2n_set_clock(ap, dpll ? 0x21 : 0x23); } return ata_sff_qc_issue(qc); } @@ -339,6 +343,8 @@ static struct ata_port_operations hpt3x2n_port_ops = { .inherits = &ata_bmdma_port_ops, .bmdma_stop = hpt3x2n_bmdma_stop, + + .qc_defer = hpt3x2n_qc_defer, .qc_issue = hpt3x2n_qc_issue, .cable_detect = hpt3x2n_cable_detect, @@ -454,7 +460,7 @@ static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id) unsigned int f_low, f_high; int adjust; unsigned long iobase = pci_resource_start(dev, 4); - void *hpriv = NULL; + void *hpriv = (void *)USE_DPLL; int rc; rc = pcim_enable_device(dev); @@ -539,7 +545,7 @@ static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id) /* Set our private data up. We only need a few flags so we use it directly */ if (pci_mhz > 60) { - hpriv = (void *)PCI66; + hpriv = (void *)(PCI66 | USE_DPLL); /* * On HPT371N, if ATA clock is 66 MHz we must set bit 2 in * the MISC. register to stretch the UltraDMA Tss timing. diff --git a/drivers/ata/pata_octeon_cf.c b/drivers/ata/pata_octeon_cf.c index d6f69561dc86..37ef416c1242 100644 --- a/drivers/ata/pata_octeon_cf.c +++ b/drivers/ata/pata_octeon_cf.c @@ -853,7 +853,7 @@ static int __devinit octeon_cf_probe(struct platform_device *pdev) return -EINVAL; cs1 = devm_ioremap_nocache(&pdev->dev, res_cs1->start, - res_cs0->end - res_cs1->start + 1); + resource_size(res_cs1)); if (!cs1) return -ENOMEM; diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index a8a7be0d06ff..df8ee325d3ca 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -59,6 +59,7 @@ #include <linux/dmapool.h> #include <linux/dma-mapping.h> #include <linux/device.h> +#include <linux/clk.h> #include <linux/platform_device.h> #include <linux/ata_platform.h> #include <linux/mbus.h> @@ -538,6 +539,7 @@ struct mv_port_signal { struct mv_host_priv { u32 hp_flags; + unsigned int board_idx; u32 main_irq_mask; struct mv_port_signal signal[8]; const struct mv_hw_ops *ops; @@ -548,6 +550,10 @@ struct mv_host_priv { u32 irq_cause_offset; u32 irq_mask_offset; u32 unmask_all_irqs; + +#if defined(CONFIG_HAVE_CLK) + struct clk *clk; +#endif /* * These consistent DMA memory pools give us guaranteed * alignment for hardware-accessed data structures, @@ -2775,7 +2781,7 @@ static void mv_port_intr(struct ata_port *ap, u32 port_cause) struct mv_port_priv *pp; int edma_was_enabled; - if (!ap || (ap->flags & ATA_FLAG_DISABLED)) { + if (ap->flags & ATA_FLAG_DISABLED) { mv_unexpected_intr(ap, 0); return; } @@ -3393,7 +3399,7 @@ static void mv_soc_reset_hc_port(struct mv_host_priv *hpriv, ZERO(0x024); /* respq outp */ ZERO(0x020); /* respq inp */ ZERO(0x02c); /* test control */ - writel(0xbc, port_mmio + EDMA_IORDY_TMOUT); + writel(0x800, port_mmio + EDMA_IORDY_TMOUT); } #undef ZERO @@ -3854,7 +3860,6 @@ static int mv_chip_id(struct ata_host *host, unsigned int board_idx) /** * mv_init_host - Perform some early initialization of the host. * @host: ATA host to initialize - * @board_idx: controller index * * If possible, do an early global reset of the host. Then do * our port init and clear/unmask all/relevant host interrupts. @@ -3862,13 +3867,13 @@ static int mv_chip_id(struct ata_host *host, unsigned int board_idx) * LOCKING: * Inherited from caller. */ -static int mv_init_host(struct ata_host *host, unsigned int board_idx) +static int mv_init_host(struct ata_host *host) { int rc = 0, n_hc, port, hc; struct mv_host_priv *hpriv = host->private_data; void __iomem *mmio = hpriv->base; - rc = mv_chip_id(host, board_idx); + rc = mv_chip_id(host, hpriv->board_idx); if (rc) goto done; @@ -3905,14 +3910,6 @@ static int mv_init_host(struct ata_host *host, unsigned int board_idx) void __iomem *port_mmio = mv_port_base(mmio, port); mv_port_init(&ap->ioaddr, port_mmio); - -#ifdef CONFIG_PCI - if (!IS_SOC(hpriv)) { - unsigned int offset = port_mmio - mmio; - ata_port_pbar_desc(ap, MV_PRIMARY_BAR, -1, "mmio"); - ata_port_pbar_desc(ap, MV_PRIMARY_BAR, offset, "port"); - } -#endif } for (hc = 0; hc < n_hc; hc++) { @@ -4035,12 +4032,21 @@ static int mv_platform_probe(struct platform_device *pdev) return -ENOMEM; host->private_data = hpriv; hpriv->n_ports = n_ports; + hpriv->board_idx = chip_soc; host->iomap = NULL; hpriv->base = devm_ioremap(&pdev->dev, res->start, resource_size(res)); hpriv->base -= SATAHC0_REG_BASE; +#if defined(CONFIG_HAVE_CLK) + hpriv->clk = clk_get(&pdev->dev, NULL); + if (IS_ERR(hpriv->clk)) + dev_notice(&pdev->dev, "cannot get clkdev\n"); + else + clk_enable(hpriv->clk); +#endif + /* * (Re-)program MBUS remapping windows if we are asked to. */ @@ -4049,12 +4055,12 @@ static int mv_platform_probe(struct platform_device *pdev) rc = mv_create_dma_pools(hpriv, &pdev->dev); if (rc) - return rc; + goto err; /* initialize adapter */ - rc = mv_init_host(host, chip_soc); + rc = mv_init_host(host); if (rc) - return rc; + goto err; dev_printk(KERN_INFO, &pdev->dev, "slots %u ports %d\n", (unsigned)MV_MAX_Q_DEPTH, @@ -4062,6 +4068,15 @@ static int mv_platform_probe(struct platform_device *pdev) return ata_host_activate(host, platform_get_irq(pdev, 0), mv_interrupt, IRQF_SHARED, &mv6_sht); +err: +#if defined(CONFIG_HAVE_CLK) + if (!IS_ERR(hpriv->clk)) { + clk_disable(hpriv->clk); + clk_put(hpriv->clk); + } +#endif + + return rc; } /* @@ -4076,14 +4091,66 @@ static int __devexit mv_platform_remove(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct ata_host *host = dev_get_drvdata(dev); - +#if defined(CONFIG_HAVE_CLK) + struct mv_host_priv *hpriv = host->private_data; +#endif ata_host_detach(host); + +#if defined(CONFIG_HAVE_CLK) + if (!IS_ERR(hpriv->clk)) { + clk_disable(hpriv->clk); + clk_put(hpriv->clk); + } +#endif return 0; } +#ifdef CONFIG_PM +static int mv_platform_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct ata_host *host = dev_get_drvdata(&pdev->dev); + if (host) + return ata_host_suspend(host, state); + else + return 0; +} + +static int mv_platform_resume(struct platform_device *pdev) +{ + struct ata_host *host = dev_get_drvdata(&pdev->dev); + int ret; + + if (host) { + struct mv_host_priv *hpriv = host->private_data; + const struct mv_sata_platform_data *mv_platform_data = \ + pdev->dev.platform_data; + /* + * (Re-)program MBUS remapping windows if we are asked to. + */ + if (mv_platform_data->dram != NULL) + mv_conf_mbus_windows(hpriv, mv_platform_data->dram); + + /* initialize adapter */ + ret = mv_init_host(host); + if (ret) { + printk(KERN_ERR DRV_NAME ": Error during HW init\n"); + return ret; + } + ata_host_resume(host); + } + + return 0; +} +#else +#define mv_platform_suspend NULL +#define mv_platform_resume NULL +#endif + static struct platform_driver mv_platform_driver = { .probe = mv_platform_probe, .remove = __devexit_p(mv_platform_remove), + .suspend = mv_platform_suspend, + .resume = mv_platform_resume, .driver = { .name = DRV_NAME, .owner = THIS_MODULE, @@ -4094,6 +4161,9 @@ static struct platform_driver mv_platform_driver = { #ifdef CONFIG_PCI static int mv_pci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent); +#ifdef CONFIG_PM +static int mv_pci_device_resume(struct pci_dev *pdev); +#endif static struct pci_driver mv_pci_driver = { @@ -4101,6 +4171,11 @@ static struct pci_driver mv_pci_driver = { .id_table = mv_pci_tbl, .probe = mv_pci_init_one, .remove = ata_pci_remove_one, +#ifdef CONFIG_PM + .suspend = ata_pci_device_suspend, + .resume = mv_pci_device_resume, +#endif + }; /* move to PCI layer or libata core? */ @@ -4194,7 +4269,7 @@ static int mv_pci_init_one(struct pci_dev *pdev, const struct ata_port_info *ppi[] = { &mv_port_info[board_idx], NULL }; struct ata_host *host; struct mv_host_priv *hpriv; - int n_ports, rc; + int n_ports, port, rc; if (!printed_version++) dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n"); @@ -4208,6 +4283,7 @@ static int mv_pci_init_one(struct pci_dev *pdev, return -ENOMEM; host->private_data = hpriv; hpriv->n_ports = n_ports; + hpriv->board_idx = board_idx; /* acquire resources */ rc = pcim_enable_device(pdev); @@ -4230,8 +4306,17 @@ static int mv_pci_init_one(struct pci_dev *pdev, if (rc) return rc; + for (port = 0; port < host->n_ports; port++) { + struct ata_port *ap = host->ports[port]; + void __iomem *port_mmio = mv_port_base(hpriv->base, port); + unsigned int offset = port_mmio - hpriv->base; + + ata_port_pbar_desc(ap, MV_PRIMARY_BAR, -1, "mmio"); + ata_port_pbar_desc(ap, MV_PRIMARY_BAR, offset, "port"); + } + /* initialize adapter */ - rc = mv_init_host(host, board_idx); + rc = mv_init_host(host); if (rc) return rc; @@ -4247,6 +4332,27 @@ static int mv_pci_init_one(struct pci_dev *pdev, return ata_host_activate(host, pdev->irq, mv_interrupt, IRQF_SHARED, IS_GEN_I(hpriv) ? &mv5_sht : &mv6_sht); } + +#ifdef CONFIG_PM +static int mv_pci_device_resume(struct pci_dev *pdev) +{ + struct ata_host *host = dev_get_drvdata(&pdev->dev); + int rc; + + rc = ata_pci_device_do_resume(pdev); + if (rc) + return rc; + + /* initialize adapter */ + rc = mv_init_host(host); + if (rc) + return rc; + + ata_host_resume(host); + + return 0; +} +#endif #endif static int mv_platform_probe(struct platform_device *pdev); diff --git a/drivers/base/bus.c b/drivers/base/bus.c index 63c143e54a57..c0c5a43d9fb3 100644 --- a/drivers/base/bus.c +++ b/drivers/base/bus.c @@ -703,9 +703,9 @@ int bus_add_driver(struct device_driver *drv) return 0; out_unregister: + kobject_put(&priv->kobj); kfree(drv->p); drv->p = NULL; - kobject_put(&priv->kobj); out_put_bus: bus_put(bus); return error; diff --git a/drivers/base/core.c b/drivers/base/core.c index f1290cbd1350..282025770429 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -446,7 +446,8 @@ struct kset *devices_kset; * @dev: device. * @attr: device attribute descriptor. */ -int device_create_file(struct device *dev, struct device_attribute *attr) +int device_create_file(struct device *dev, + const struct device_attribute *attr) { int error = 0; if (dev) @@ -459,7 +460,8 @@ int device_create_file(struct device *dev, struct device_attribute *attr) * @dev: device. * @attr: device attribute descriptor. */ -void device_remove_file(struct device *dev, struct device_attribute *attr) +void device_remove_file(struct device *dev, + const struct device_attribute *attr) { if (dev) sysfs_remove_file(&dev->kobj, &attr->attr); @@ -470,7 +472,8 @@ void device_remove_file(struct device *dev, struct device_attribute *attr) * @dev: device. * @attr: device binary attribute descriptor. */ -int device_create_bin_file(struct device *dev, struct bin_attribute *attr) +int device_create_bin_file(struct device *dev, + const struct bin_attribute *attr) { int error = -EINVAL; if (dev) @@ -484,7 +487,8 @@ EXPORT_SYMBOL_GPL(device_create_bin_file); * @dev: device. * @attr: device binary attribute descriptor. */ -void device_remove_bin_file(struct device *dev, struct bin_attribute *attr) +void device_remove_bin_file(struct device *dev, + const struct bin_attribute *attr) { if (dev) sysfs_remove_bin_file(&dev->kobj, attr); @@ -905,8 +909,10 @@ int device_add(struct device *dev) dev->init_name = NULL; } - if (!dev_name(dev)) + if (!dev_name(dev)) { + error = -EINVAL; goto name_error; + } pr_debug("device: '%s': %s\n", dev_name(dev), __func__); diff --git a/drivers/base/devtmpfs.c b/drivers/base/devtmpfs.c index 50375bb8e51d..090dd4851301 100644 --- a/drivers/base/devtmpfs.c +++ b/drivers/base/devtmpfs.c @@ -32,7 +32,7 @@ static int dev_mount = 1; static int dev_mount; #endif -static rwlock_t dirlock; +static DEFINE_MUTEX(dirlock); static int __init mount_param(char *str) { @@ -93,7 +93,7 @@ static int create_path(const char *nodepath) { int err; - read_lock(&dirlock); + mutex_lock(&dirlock); err = dev_mkdir(nodepath, 0755); if (err == -ENOENT) { char *path; @@ -101,8 +101,10 @@ static int create_path(const char *nodepath) /* parent directories do not exist, create them */ path = kstrdup(nodepath, GFP_KERNEL); - if (!path) - return -ENOMEM; + if (!path) { + err = -ENOMEM; + goto out; + } s = path; for (;;) { s = strchr(s, '/'); @@ -117,7 +119,8 @@ static int create_path(const char *nodepath) } kfree(path); } - read_unlock(&dirlock); +out: + mutex_unlock(&dirlock); return err; } @@ -229,7 +232,7 @@ static int delete_path(const char *nodepath) if (!path) return -ENOMEM; - write_lock(&dirlock); + mutex_lock(&dirlock); for (;;) { char *base; @@ -241,7 +244,7 @@ static int delete_path(const char *nodepath) if (err) break; } - write_unlock(&dirlock); + mutex_unlock(&dirlock); kfree(path); return err; @@ -352,8 +355,6 @@ int __init devtmpfs_init(void) int err; struct vfsmount *mnt; - rwlock_init(&dirlock); - err = register_filesystem(&dev_fs_type); if (err) { printk(KERN_ERR "devtmpfs: unable to register devtmpfs " diff --git a/drivers/base/driver.c b/drivers/base/driver.c index f367885a7646..90c9fff09ead 100644 --- a/drivers/base/driver.c +++ b/drivers/base/driver.c @@ -98,7 +98,7 @@ EXPORT_SYMBOL_GPL(driver_find_device); * @attr: driver attribute descriptor. */ int driver_create_file(struct device_driver *drv, - struct driver_attribute *attr) + const struct driver_attribute *attr) { int error; if (drv) @@ -115,7 +115,7 @@ EXPORT_SYMBOL_GPL(driver_create_file); * @attr: driver attribute descriptor. */ void driver_remove_file(struct device_driver *drv, - struct driver_attribute *attr) + const struct driver_attribute *attr) { if (drv) sysfs_remove_file(&drv->p->kobj, &attr->attr); diff --git a/drivers/base/memory.c b/drivers/base/memory.c index c4c8f2e1dd15..d7d77d4a402c 100644 --- a/drivers/base/memory.c +++ b/drivers/base/memory.c @@ -63,6 +63,20 @@ void unregister_memory_notifier(struct notifier_block *nb) } EXPORT_SYMBOL(unregister_memory_notifier); +static ATOMIC_NOTIFIER_HEAD(memory_isolate_chain); + +int register_memory_isolate_notifier(struct notifier_block *nb) +{ + return atomic_notifier_chain_register(&memory_isolate_chain, nb); +} +EXPORT_SYMBOL(register_memory_isolate_notifier); + +void unregister_memory_isolate_notifier(struct notifier_block *nb) +{ + atomic_notifier_chain_unregister(&memory_isolate_chain, nb); +} +EXPORT_SYMBOL(unregister_memory_isolate_notifier); + /* * register_memory - Setup a sysfs device for a memory block */ @@ -157,6 +171,11 @@ int memory_notify(unsigned long val, void *v) return blocking_notifier_call_chain(&memory_chain, val, v); } +int memory_isolate_notify(unsigned long val, void *v) +{ + return atomic_notifier_call_chain(&memory_isolate_chain, val, v); +} + /* * MEMORY_HOTPLUG depends on SPARSEMEM in mm/Kconfig, so it is * OK to have direct references to sparsemem variables in here. diff --git a/drivers/base/platform.c b/drivers/base/platform.c index 9d2ee25deaf5..58efaf2f1259 100644 --- a/drivers/base/platform.c +++ b/drivers/base/platform.c @@ -441,6 +441,7 @@ error: platform_device_put(pdev); return ERR_PTR(retval); } +EXPORT_SYMBOL_GPL(platform_device_register_data); static int platform_drv_probe(struct device *_dev) { diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c index 1a216c114a0f..48adf80926a0 100644 --- a/drivers/base/power/main.c +++ b/drivers/base/power/main.c @@ -161,6 +161,32 @@ void device_pm_move_last(struct device *dev) list_move_tail(&dev->power.entry, &dpm_list); } +static ktime_t initcall_debug_start(struct device *dev) +{ + ktime_t calltime = ktime_set(0, 0); + + if (initcall_debug) { + pr_info("calling %s+ @ %i\n", + dev_name(dev), task_pid_nr(current)); + calltime = ktime_get(); + } + + return calltime; +} + +static void initcall_debug_report(struct device *dev, ktime_t calltime, + int error) +{ + ktime_t delta, rettime; + + if (initcall_debug) { + rettime = ktime_get(); + delta = ktime_sub(rettime, calltime); + pr_info("call %s+ returned %d after %Ld usecs\n", dev_name(dev), + error, (unsigned long long)ktime_to_ns(delta) >> 10); + } +} + /** * pm_op - Execute the PM operation appropriate for given PM event. * @dev: Device to handle. @@ -172,13 +198,9 @@ static int pm_op(struct device *dev, pm_message_t state) { int error = 0; - ktime_t calltime, delta, rettime; + ktime_t calltime; - if (initcall_debug) { - pr_info("calling %s+ @ %i\n", - dev_name(dev), task_pid_nr(current)); - calltime = ktime_get(); - } + calltime = initcall_debug_start(dev); switch (state.event) { #ifdef CONFIG_SUSPEND @@ -227,12 +249,7 @@ static int pm_op(struct device *dev, error = -EINVAL; } - if (initcall_debug) { - rettime = ktime_get(); - delta = ktime_sub(rettime, calltime); - pr_info("call %s+ returned %d after %Ld usecs\n", dev_name(dev), - error, (unsigned long long)ktime_to_ns(delta) >> 10); - } + initcall_debug_report(dev, calltime, error); return error; } @@ -309,8 +326,9 @@ static int pm_noirq_op(struct device *dev, if (initcall_debug) { rettime = ktime_get(); delta = ktime_sub(rettime, calltime); - printk("initcall %s_i+ returned %d after %Ld usecs\n", dev_name(dev), - error, (unsigned long long)ktime_to_ns(delta) >> 10); + printk("initcall %s_i+ returned %d after %Ld usecs\n", + dev_name(dev), error, + (unsigned long long)ktime_to_ns(delta) >> 10); } return error; @@ -354,6 +372,23 @@ static void pm_dev_err(struct device *dev, pm_message_t state, char *info, kobject_name(&dev->kobj), pm_verb(state.event), info, error); } +static void dpm_show_time(ktime_t starttime, pm_message_t state, char *info) +{ + ktime_t calltime; + s64 usecs64; + int usecs; + + calltime = ktime_get(); + usecs64 = ktime_to_ns(ktime_sub(calltime, starttime)); + do_div(usecs64, NSEC_PER_USEC); + usecs = usecs64; + if (usecs == 0) + usecs = 1; + pr_info("PM: %s%s%s of devices complete after %ld.%03ld msecs\n", + info ?: "", info ? " " : "", pm_verb(state.event), + usecs / USEC_PER_MSEC, usecs % USEC_PER_MSEC); +} + /*------------------------- Resume routines -------------------------*/ /** @@ -390,6 +425,7 @@ static int device_resume_noirq(struct device *dev, pm_message_t state) void dpm_resume_noirq(pm_message_t state) { struct device *dev; + ktime_t starttime = ktime_get(); mutex_lock(&dpm_list_mtx); transition_started = false; @@ -403,11 +439,32 @@ void dpm_resume_noirq(pm_message_t state) pm_dev_err(dev, state, " early", error); } mutex_unlock(&dpm_list_mtx); + dpm_show_time(starttime, state, "early"); resume_device_irqs(); } EXPORT_SYMBOL_GPL(dpm_resume_noirq); /** + * legacy_resume - Execute a legacy (bus or class) resume callback for device. + * dev: Device to resume. + * cb: Resume callback to execute. + */ +static int legacy_resume(struct device *dev, int (*cb)(struct device *dev)) +{ + int error; + ktime_t calltime; + + calltime = initcall_debug_start(dev); + + error = cb(dev); + suspend_report_result(cb, error); + + initcall_debug_report(dev, calltime, error); + + return error; +} + +/** * device_resume - Execute "resume" callbacks for given device. * @dev: Device to handle. * @state: PM transition of the system being carried out. @@ -427,7 +484,7 @@ static int device_resume(struct device *dev, pm_message_t state) error = pm_op(dev, dev->bus->pm, state); } else if (dev->bus->resume) { pm_dev_dbg(dev, state, "legacy "); - error = dev->bus->resume(dev); + error = legacy_resume(dev, dev->bus->resume); } if (error) goto End; @@ -448,7 +505,7 @@ static int device_resume(struct device *dev, pm_message_t state) error = pm_op(dev, dev->class->pm, state); } else if (dev->class->resume) { pm_dev_dbg(dev, state, "legacy class "); - error = dev->class->resume(dev); + error = legacy_resume(dev, dev->class->resume); } } End: @@ -468,6 +525,7 @@ static int device_resume(struct device *dev, pm_message_t state) static void dpm_resume(pm_message_t state) { struct list_head list; + ktime_t starttime = ktime_get(); INIT_LIST_HEAD(&list); mutex_lock(&dpm_list_mtx); @@ -496,6 +554,7 @@ static void dpm_resume(pm_message_t state) } list_splice(&list, &dpm_list); mutex_unlock(&dpm_list_mtx); + dpm_show_time(starttime, state, NULL); } /** @@ -548,7 +607,7 @@ static void dpm_complete(pm_message_t state) mutex_unlock(&dpm_list_mtx); device_complete(dev, state); - pm_runtime_put_noidle(dev); + pm_runtime_put_sync(dev); mutex_lock(&dpm_list_mtx); } @@ -628,6 +687,7 @@ static int device_suspend_noirq(struct device *dev, pm_message_t state) int dpm_suspend_noirq(pm_message_t state) { struct device *dev; + ktime_t starttime = ktime_get(); int error = 0; suspend_device_irqs(); @@ -643,11 +703,34 @@ int dpm_suspend_noirq(pm_message_t state) mutex_unlock(&dpm_list_mtx); if (error) dpm_resume_noirq(resume_event(state)); + else + dpm_show_time(starttime, state, "late"); return error; } EXPORT_SYMBOL_GPL(dpm_suspend_noirq); /** + * legacy_suspend - Execute a legacy (bus or class) suspend callback for device. + * dev: Device to suspend. + * cb: Suspend callback to execute. + */ +static int legacy_suspend(struct device *dev, pm_message_t state, + int (*cb)(struct device *dev, pm_message_t state)) +{ + int error; + ktime_t calltime; + + calltime = initcall_debug_start(dev); + + error = cb(dev, state); + suspend_report_result(cb, error); + + initcall_debug_report(dev, calltime, error); + + return error; +} + +/** * device_suspend - Execute "suspend" callbacks for given device. * @dev: Device to handle. * @state: PM transition of the system being carried out. @@ -664,8 +747,7 @@ static int device_suspend(struct device *dev, pm_message_t state) error = pm_op(dev, dev->class->pm, state); } else if (dev->class->suspend) { pm_dev_dbg(dev, state, "legacy class "); - error = dev->class->suspend(dev, state); - suspend_report_result(dev->class->suspend, error); + error = legacy_suspend(dev, state, dev->class->suspend); } if (error) goto End; @@ -686,8 +768,7 @@ static int device_suspend(struct device *dev, pm_message_t state) error = pm_op(dev, dev->bus->pm, state); } else if (dev->bus->suspend) { pm_dev_dbg(dev, state, "legacy "); - error = dev->bus->suspend(dev, state); - suspend_report_result(dev->bus->suspend, error); + error = legacy_suspend(dev, state, dev->bus->suspend); } } End: @@ -703,6 +784,7 @@ static int device_suspend(struct device *dev, pm_message_t state) static int dpm_suspend(pm_message_t state) { struct list_head list; + ktime_t starttime = ktime_get(); int error = 0; INIT_LIST_HEAD(&list); @@ -728,6 +810,8 @@ static int dpm_suspend(pm_message_t state) } list_splice(&list, dpm_list.prev); mutex_unlock(&dpm_list_mtx); + if (!error) + dpm_show_time(starttime, state, NULL); return error; } @@ -796,7 +880,7 @@ static int dpm_prepare(pm_message_t state) pm_runtime_get_noresume(dev); if (pm_runtime_barrier(dev) && device_may_wakeup(dev)) { /* Wake-up requested during system sleep transition. */ - pm_runtime_put_noidle(dev); + pm_runtime_put_sync(dev); error = -EBUSY; } else { error = device_prepare(dev, state); diff --git a/drivers/base/power/runtime.c b/drivers/base/power/runtime.c index 40d7720a4b21..f8b044e8aef7 100644 --- a/drivers/base/power/runtime.c +++ b/drivers/base/power/runtime.c @@ -85,6 +85,19 @@ static int __pm_runtime_idle(struct device *dev) dev->bus->pm->runtime_idle(dev); spin_lock_irq(&dev->power.lock); + } else if (dev->type && dev->type->pm && dev->type->pm->runtime_idle) { + spin_unlock_irq(&dev->power.lock); + + dev->type->pm->runtime_idle(dev); + + spin_lock_irq(&dev->power.lock); + } else if (dev->class && dev->class->pm + && dev->class->pm->runtime_idle) { + spin_unlock_irq(&dev->power.lock); + + dev->class->pm->runtime_idle(dev); + + spin_lock_irq(&dev->power.lock); } dev->power.idle_notification = false; @@ -194,6 +207,22 @@ int __pm_runtime_suspend(struct device *dev, bool from_wq) spin_lock_irq(&dev->power.lock); dev->power.runtime_error = retval; + } else if (dev->type && dev->type->pm + && dev->type->pm->runtime_suspend) { + spin_unlock_irq(&dev->power.lock); + + retval = dev->type->pm->runtime_suspend(dev); + + spin_lock_irq(&dev->power.lock); + dev->power.runtime_error = retval; + } else if (dev->class && dev->class->pm + && dev->class->pm->runtime_suspend) { + spin_unlock_irq(&dev->power.lock); + + retval = dev->class->pm->runtime_suspend(dev); + + spin_lock_irq(&dev->power.lock); + dev->power.runtime_error = retval; } else { retval = -ENOSYS; } @@ -359,6 +388,22 @@ int __pm_runtime_resume(struct device *dev, bool from_wq) spin_lock_irq(&dev->power.lock); dev->power.runtime_error = retval; + } else if (dev->type && dev->type->pm + && dev->type->pm->runtime_resume) { + spin_unlock_irq(&dev->power.lock); + + retval = dev->type->pm->runtime_resume(dev); + + spin_lock_irq(&dev->power.lock); + dev->power.runtime_error = retval; + } else if (dev->class && dev->class->pm + && dev->class->pm->runtime_resume) { + spin_unlock_irq(&dev->power.lock); + + retval = dev->class->pm->runtime_resume(dev); + + spin_lock_irq(&dev->power.lock); + dev->power.runtime_error = retval; } else { retval = -ENOSYS; } diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 4d2905996751..a699f09ddf7c 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -307,6 +307,7 @@ static void btusb_bulk_complete(struct urb *urb) return; usb_anchor_urb(urb, &data->bulk_anchor); + usb_mark_last_busy(data->udev); err = usb_submit_urb(urb, GFP_ATOMIC); if (err < 0) { diff --git a/drivers/char/nozomi.c b/drivers/char/nozomi.c index d3400b20444f..7d73cd430340 100644 --- a/drivers/char/nozomi.c +++ b/drivers/char/nozomi.c @@ -358,7 +358,7 @@ struct port { u8 update_flow_control; struct ctrl_ul ctrl_ul; struct ctrl_dl ctrl_dl; - struct kfifo *fifo_ul; + struct kfifo fifo_ul; void __iomem *dl_addr[2]; u32 dl_size[2]; u8 toggle_dl; @@ -685,8 +685,6 @@ static int nozomi_read_config_table(struct nozomi *dc) dump_table(dc); for (i = PORT_MDM; i < MAX_PORT; i++) { - dc->port[i].fifo_ul = - kfifo_alloc(FIFO_BUFFER_SIZE_UL, GFP_ATOMIC, NULL); memset(&dc->port[i].ctrl_dl, 0, sizeof(struct ctrl_dl)); memset(&dc->port[i].ctrl_ul, 0, sizeof(struct ctrl_ul)); } @@ -798,7 +796,7 @@ static int send_data(enum port_type index, struct nozomi *dc) struct tty_struct *tty = tty_port_tty_get(&port->port); /* Get data from tty and place in buf for now */ - size = __kfifo_get(port->fifo_ul, dc->send_buf, + size = kfifo_out(&port->fifo_ul, dc->send_buf, ul_size < SEND_BUF_MAX ? ul_size : SEND_BUF_MAX); if (size == 0) { @@ -988,11 +986,11 @@ static int receive_flow_control(struct nozomi *dc) } else if (old_ctrl.CTS == 0 && ctrl_dl.CTS == 1) { - if (__kfifo_len(dc->port[port].fifo_ul)) { + if (kfifo_len(&dc->port[port].fifo_ul)) { DBG1("Enable interrupt (0x%04X) on port: %d", enable_ier, port); DBG1("Data in buffer [%d], enable transmit! ", - __kfifo_len(dc->port[port].fifo_ul)); + kfifo_len(&dc->port[port].fifo_ul)); enable_transmit_ul(port, dc); } else { DBG1("No data in buffer..."); @@ -1433,6 +1431,16 @@ static int __devinit nozomi_card_init(struct pci_dev *pdev, goto err_free_sbuf; } + for (i = PORT_MDM; i < MAX_PORT; i++) { + if (kfifo_alloc(&dc->port[i].fifo_ul, + FIFO_BUFFER_SIZE_UL, GFP_ATOMIC)) { + dev_err(&pdev->dev, + "Could not allocate kfifo buffer\n"); + ret = -ENOMEM; + goto err_free_kfifo; + } + } + spin_lock_init(&dc->spin_mutex); nozomi_setup_private_data(dc); @@ -1445,7 +1453,7 @@ static int __devinit nozomi_card_init(struct pci_dev *pdev, NOZOMI_NAME, dc); if (unlikely(ret)) { dev_err(&pdev->dev, "can't request irq %d\n", pdev->irq); - goto err_free_sbuf; + goto err_free_kfifo; } DBG1("base_addr: %p", dc->base_addr); @@ -1464,13 +1472,28 @@ static int __devinit nozomi_card_init(struct pci_dev *pdev, dc->state = NOZOMI_STATE_ENABLED; for (i = 0; i < MAX_PORT; i++) { + struct device *tty_dev; + mutex_init(&dc->port[i].tty_sem); tty_port_init(&dc->port[i].port); - tty_register_device(ntty_driver, dc->index_start + i, + tty_dev = tty_register_device(ntty_driver, dc->index_start + i, &pdev->dev); + + if (IS_ERR(tty_dev)) { + ret = PTR_ERR(tty_dev); + dev_err(&pdev->dev, "Could not allocate tty?\n"); + goto err_free_tty; + } } + return 0; +err_free_tty: + for (i = dc->index_start; i < dc->index_start + MAX_PORT; ++i) + tty_unregister_device(ntty_driver, i); +err_free_kfifo: + for (i = 0; i < MAX_PORT; i++) + kfifo_free(&dc->port[i].fifo_ul); err_free_sbuf: kfree(dc->send_buf); iounmap(dc->base_addr); @@ -1536,8 +1559,7 @@ static void __devexit nozomi_card_exit(struct pci_dev *pdev) free_irq(pdev->irq, dc); for (i = 0; i < MAX_PORT; i++) - if (dc->port[i].fifo_ul) - kfifo_free(dc->port[i].fifo_ul); + kfifo_free(&dc->port[i].fifo_ul); kfree(dc->send_buf); @@ -1673,7 +1695,7 @@ static int ntty_write(struct tty_struct *tty, const unsigned char *buffer, goto exit; } - rval = __kfifo_put(port->fifo_ul, (unsigned char *)buffer, count); + rval = kfifo_in(&port->fifo_ul, (unsigned char *)buffer, count); /* notify card */ if (unlikely(dc == NULL)) { @@ -1721,7 +1743,7 @@ static int ntty_write_room(struct tty_struct *tty) if (!port->port.count) goto exit; - room = port->fifo_ul->size - __kfifo_len(port->fifo_ul); + room = port->fifo_ul.size - kfifo_len(&port->fifo_ul); exit: mutex_unlock(&port->tty_sem); @@ -1878,7 +1900,7 @@ static s32 ntty_chars_in_buffer(struct tty_struct *tty) goto exit_in_buffer; } - rval = __kfifo_len(port->fifo_ul); + rval = kfifo_len(&port->fifo_ul); exit_in_buffer: return rval; diff --git a/drivers/char/sonypi.c b/drivers/char/sonypi.c index 8c262aaf7c26..0798754a607c 100644 --- a/drivers/char/sonypi.c +++ b/drivers/char/sonypi.c @@ -487,7 +487,7 @@ static struct sonypi_device { int camera_power; int bluetooth_power; struct mutex lock; - struct kfifo *fifo; + struct kfifo fifo; spinlock_t fifo_lock; wait_queue_head_t fifo_proc_list; struct fasync_struct *fifo_async; @@ -496,7 +496,7 @@ static struct sonypi_device { struct input_dev *input_jog_dev; struct input_dev *input_key_dev; struct work_struct input_work; - struct kfifo *input_fifo; + struct kfifo input_fifo; spinlock_t input_fifo_lock; } sonypi_device; @@ -777,8 +777,9 @@ static void input_keyrelease(struct work_struct *work) { struct sonypi_keypress kp; - while (kfifo_get(sonypi_device.input_fifo, (unsigned char *)&kp, - sizeof(kp)) == sizeof(kp)) { + while (kfifo_out_locked(&sonypi_device.input_fifo, (unsigned char *)&kp, + sizeof(kp), &sonypi_device.input_fifo_lock) + == sizeof(kp)) { msleep(10); input_report_key(kp.dev, kp.key, 0); input_sync(kp.dev); @@ -827,8 +828,9 @@ static void sonypi_report_input_event(u8 event) if (kp.dev) { input_report_key(kp.dev, kp.key, 1); input_sync(kp.dev); - kfifo_put(sonypi_device.input_fifo, - (unsigned char *)&kp, sizeof(kp)); + kfifo_in_locked(&sonypi_device.input_fifo, + (unsigned char *)&kp, sizeof(kp), + &sonypi_device.input_fifo_lock); schedule_work(&sonypi_device.input_work); } } @@ -880,7 +882,8 @@ found: acpi_bus_generate_proc_event(sonypi_acpi_device, 1, event); #endif - kfifo_put(sonypi_device.fifo, (unsigned char *)&event, sizeof(event)); + kfifo_in_locked(&sonypi_device.fifo, (unsigned char *)&event, + sizeof(event), &sonypi_device.fifo_lock); kill_fasync(&sonypi_device.fifo_async, SIGIO, POLL_IN); wake_up_interruptible(&sonypi_device.fifo_proc_list); @@ -906,7 +909,7 @@ static int sonypi_misc_open(struct inode *inode, struct file *file) mutex_lock(&sonypi_device.lock); /* Flush input queue on first open */ if (!sonypi_device.open_count) - kfifo_reset(sonypi_device.fifo); + kfifo_reset(&sonypi_device.fifo); sonypi_device.open_count++; mutex_unlock(&sonypi_device.lock); unlock_kernel(); @@ -919,17 +922,18 @@ static ssize_t sonypi_misc_read(struct file *file, char __user *buf, ssize_t ret; unsigned char c; - if ((kfifo_len(sonypi_device.fifo) == 0) && + if ((kfifo_len(&sonypi_device.fifo) == 0) && (file->f_flags & O_NONBLOCK)) return -EAGAIN; ret = wait_event_interruptible(sonypi_device.fifo_proc_list, - kfifo_len(sonypi_device.fifo) != 0); + kfifo_len(&sonypi_device.fifo) != 0); if (ret) return ret; while (ret < count && - (kfifo_get(sonypi_device.fifo, &c, sizeof(c)) == sizeof(c))) { + (kfifo_out_locked(&sonypi_device.fifo, &c, sizeof(c), + &sonypi_device.fifo_lock) == sizeof(c))) { if (put_user(c, buf++)) return -EFAULT; ret++; @@ -946,7 +950,7 @@ static ssize_t sonypi_misc_read(struct file *file, char __user *buf, static unsigned int sonypi_misc_poll(struct file *file, poll_table *wait) { poll_wait(file, &sonypi_device.fifo_proc_list, wait); - if (kfifo_len(sonypi_device.fifo)) + if (kfifo_len(&sonypi_device.fifo)) return POLLIN | POLLRDNORM; return 0; } @@ -1313,11 +1317,10 @@ static int __devinit sonypi_probe(struct platform_device *dev) "http://www.linux.it/~malattia/wiki/index.php/Sony_drivers\n"); spin_lock_init(&sonypi_device.fifo_lock); - sonypi_device.fifo = kfifo_alloc(SONYPI_BUF_SIZE, GFP_KERNEL, - &sonypi_device.fifo_lock); - if (IS_ERR(sonypi_device.fifo)) { + error = kfifo_alloc(&sonypi_device.fifo, SONYPI_BUF_SIZE, GFP_KERNEL); + if (error) { printk(KERN_ERR "sonypi: kfifo_alloc failed\n"); - return PTR_ERR(sonypi_device.fifo); + return error; } init_waitqueue_head(&sonypi_device.fifo_proc_list); @@ -1393,12 +1396,10 @@ static int __devinit sonypi_probe(struct platform_device *dev) } spin_lock_init(&sonypi_device.input_fifo_lock); - sonypi_device.input_fifo = - kfifo_alloc(SONYPI_BUF_SIZE, GFP_KERNEL, - &sonypi_device.input_fifo_lock); - if (IS_ERR(sonypi_device.input_fifo)) { + error = kfifo_alloc(&sonypi_device.input_fifo, SONYPI_BUF_SIZE, + GFP_KERNEL); + if (error) { printk(KERN_ERR "sonypi: kfifo_alloc failed\n"); - error = PTR_ERR(sonypi_device.input_fifo); goto err_inpdev_unregister; } @@ -1423,7 +1424,7 @@ static int __devinit sonypi_probe(struct platform_device *dev) pci_disable_device(pcidev); err_put_pcidev: pci_dev_put(pcidev); - kfifo_free(sonypi_device.fifo); + kfifo_free(&sonypi_device.fifo); return error; } @@ -1438,7 +1439,7 @@ static int __devexit sonypi_remove(struct platform_device *dev) if (useinput) { input_unregister_device(sonypi_device.input_key_dev); input_unregister_device(sonypi_device.input_jog_dev); - kfifo_free(sonypi_device.input_fifo); + kfifo_free(&sonypi_device.input_fifo); } misc_deregister(&sonypi_misc_device); @@ -1451,7 +1452,7 @@ static int __devexit sonypi_remove(struct platform_device *dev) pci_dev_put(sonypi_device.dev); } - kfifo_free(sonypi_device.fifo); + kfifo_free(&sonypi_device.fifo); return 0; } diff --git a/drivers/gpu/drm/drm_drv.c b/drivers/gpu/drm/drm_drv.c index ff2f1042cb44..766c46875a20 100644 --- a/drivers/gpu/drm/drm_drv.c +++ b/drivers/gpu/drm/drm_drv.c @@ -434,11 +434,11 @@ static int drm_version(struct drm_device *dev, void *data, * Looks up the ioctl function in the ::ioctls table, checking for root * previleges if so required, and dispatches to the respective function. */ -int drm_ioctl(struct inode *inode, struct file *filp, +long drm_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) { struct drm_file *file_priv = filp->private_data; - struct drm_device *dev = file_priv->minor->dev; + struct drm_device *dev; struct drm_ioctl_desc *ioctl; drm_ioctl_t *func; unsigned int nr = DRM_IOCTL_NR(cmd); @@ -446,6 +446,7 @@ int drm_ioctl(struct inode *inode, struct file *filp, char stack_kdata[128]; char *kdata = NULL; + dev = file_priv->minor->dev; atomic_inc(&dev->ioctl_count); atomic_inc(&dev->counts[_DRM_STAT_IOCTLS]); ++file_priv->ioctl_count; @@ -501,7 +502,13 @@ int drm_ioctl(struct inode *inode, struct file *filp, goto err_i1; } } - retcode = func(dev, kdata, file_priv); + if (ioctl->flags & DRM_UNLOCKED) + retcode = func(dev, kdata, file_priv); + else { + lock_kernel(); + retcode = func(dev, kdata, file_priv); + unlock_kernel(); + } if (cmd & IOC_OUT) { if (copy_to_user((void __user *)arg, kdata, diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c index c39b26f1abed..5c9f79877cbf 100644 --- a/drivers/gpu/drm/drm_edid.c +++ b/drivers/gpu/drm/drm_edid.c @@ -913,7 +913,7 @@ static int drm_cvt_modes(struct drm_connector *connector, const int rates[] = { 60, 85, 75, 60, 50 }; for (i = 0; i < 4; i++) { - int width, height; + int uninitialized_var(width), height; cvt = &(timing->data.other_data.data.cvt[i]); height = (cvt->code[0] + ((cvt->code[1] & 0xf0) << 8) + 1) * 2; diff --git a/drivers/gpu/drm/drm_ioc32.c b/drivers/gpu/drm/drm_ioc32.c index 282d9fdf9f4e..d61d185cf040 100644 --- a/drivers/gpu/drm/drm_ioc32.c +++ b/drivers/gpu/drm/drm_ioc32.c @@ -104,7 +104,7 @@ static int compat_drm_version(struct file *file, unsigned int cmd, &version->desc)) return -EFAULT; - err = drm_ioctl(file->f_path.dentry->d_inode, file, + err = drm_ioctl(file, DRM_IOCTL_VERSION, (unsigned long)version); if (err) return err; @@ -145,8 +145,7 @@ static int compat_drm_getunique(struct file *file, unsigned int cmd, &u->unique)) return -EFAULT; - err = drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_GET_UNIQUE, (unsigned long)u); + err = drm_ioctl(file, DRM_IOCTL_GET_UNIQUE, (unsigned long)u); if (err) return err; @@ -174,8 +173,7 @@ static int compat_drm_setunique(struct file *file, unsigned int cmd, &u->unique)) return -EFAULT; - return drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_SET_UNIQUE, (unsigned long)u); + return drm_ioctl(file, DRM_IOCTL_SET_UNIQUE, (unsigned long)u); } typedef struct drm_map32 { @@ -205,8 +203,7 @@ static int compat_drm_getmap(struct file *file, unsigned int cmd, if (__put_user(idx, &map->offset)) return -EFAULT; - err = drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_GET_MAP, (unsigned long)map); + err = drm_ioctl(file, DRM_IOCTL_GET_MAP, (unsigned long)map); if (err) return err; @@ -246,8 +243,7 @@ static int compat_drm_addmap(struct file *file, unsigned int cmd, || __put_user(m32.flags, &map->flags)) return -EFAULT; - err = drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_ADD_MAP, (unsigned long)map); + err = drm_ioctl(file, DRM_IOCTL_ADD_MAP, (unsigned long)map); if (err) return err; @@ -284,8 +280,7 @@ static int compat_drm_rmmap(struct file *file, unsigned int cmd, if (__put_user((void *)(unsigned long)handle, &map->handle)) return -EFAULT; - return drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_RM_MAP, (unsigned long)map); + return drm_ioctl(file, DRM_IOCTL_RM_MAP, (unsigned long)map); } typedef struct drm_client32 { @@ -314,8 +309,7 @@ static int compat_drm_getclient(struct file *file, unsigned int cmd, if (__put_user(idx, &client->idx)) return -EFAULT; - err = drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_GET_CLIENT, (unsigned long)client); + err = drm_ioctl(file, DRM_IOCTL_GET_CLIENT, (unsigned long)client); if (err) return err; @@ -351,8 +345,7 @@ static int compat_drm_getstats(struct file *file, unsigned int cmd, if (!access_ok(VERIFY_WRITE, stats, sizeof(*stats))) return -EFAULT; - err = drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_GET_STATS, (unsigned long)stats); + err = drm_ioctl(file, DRM_IOCTL_GET_STATS, (unsigned long)stats); if (err) return err; @@ -395,8 +388,7 @@ static int compat_drm_addbufs(struct file *file, unsigned int cmd, || __put_user(agp_start, &buf->agp_start)) return -EFAULT; - err = drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_ADD_BUFS, (unsigned long)buf); + err = drm_ioctl(file, DRM_IOCTL_ADD_BUFS, (unsigned long)buf); if (err) return err; @@ -427,8 +419,7 @@ static int compat_drm_markbufs(struct file *file, unsigned int cmd, || __put_user(b32.high_mark, &buf->high_mark)) return -EFAULT; - return drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_MARK_BUFS, (unsigned long)buf); + return drm_ioctl(file, DRM_IOCTL_MARK_BUFS, (unsigned long)buf); } typedef struct drm_buf_info32 { @@ -469,8 +460,7 @@ static int compat_drm_infobufs(struct file *file, unsigned int cmd, || __put_user(list, &request->list)) return -EFAULT; - err = drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_INFO_BUFS, (unsigned long)request); + err = drm_ioctl(file, DRM_IOCTL_INFO_BUFS, (unsigned long)request); if (err) return err; @@ -531,8 +521,7 @@ static int compat_drm_mapbufs(struct file *file, unsigned int cmd, || __put_user(list, &request->list)) return -EFAULT; - err = drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_MAP_BUFS, (unsigned long)request); + err = drm_ioctl(file, DRM_IOCTL_MAP_BUFS, (unsigned long)request); if (err) return err; @@ -578,8 +567,7 @@ static int compat_drm_freebufs(struct file *file, unsigned int cmd, &request->list)) return -EFAULT; - return drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_FREE_BUFS, (unsigned long)request); + return drm_ioctl(file, DRM_IOCTL_FREE_BUFS, (unsigned long)request); } typedef struct drm_ctx_priv_map32 { @@ -605,8 +593,7 @@ static int compat_drm_setsareactx(struct file *file, unsigned int cmd, &request->handle)) return -EFAULT; - return drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_SET_SAREA_CTX, (unsigned long)request); + return drm_ioctl(file, DRM_IOCTL_SET_SAREA_CTX, (unsigned long)request); } static int compat_drm_getsareactx(struct file *file, unsigned int cmd, @@ -628,8 +615,7 @@ static int compat_drm_getsareactx(struct file *file, unsigned int cmd, if (__put_user(ctx_id, &request->ctx_id)) return -EFAULT; - err = drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_GET_SAREA_CTX, (unsigned long)request); + err = drm_ioctl(file, DRM_IOCTL_GET_SAREA_CTX, (unsigned long)request); if (err) return err; @@ -664,8 +650,7 @@ static int compat_drm_resctx(struct file *file, unsigned int cmd, &res->contexts)) return -EFAULT; - err = drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_RES_CTX, (unsigned long)res); + err = drm_ioctl(file, DRM_IOCTL_RES_CTX, (unsigned long)res); if (err) return err; @@ -718,8 +703,7 @@ static int compat_drm_dma(struct file *file, unsigned int cmd, &d->request_sizes)) return -EFAULT; - err = drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_DMA, (unsigned long)d); + err = drm_ioctl(file, DRM_IOCTL_DMA, (unsigned long)d); if (err) return err; @@ -751,8 +735,7 @@ static int compat_drm_agp_enable(struct file *file, unsigned int cmd, if (put_user(m32.mode, &mode->mode)) return -EFAULT; - return drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_AGP_ENABLE, (unsigned long)mode); + return drm_ioctl(file, DRM_IOCTL_AGP_ENABLE, (unsigned long)mode); } typedef struct drm_agp_info32 { @@ -781,8 +764,7 @@ static int compat_drm_agp_info(struct file *file, unsigned int cmd, if (!access_ok(VERIFY_WRITE, info, sizeof(*info))) return -EFAULT; - err = drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_AGP_INFO, (unsigned long)info); + err = drm_ioctl(file, DRM_IOCTL_AGP_INFO, (unsigned long)info); if (err) return err; @@ -827,16 +809,14 @@ static int compat_drm_agp_alloc(struct file *file, unsigned int cmd, || __put_user(req32.type, &request->type)) return -EFAULT; - err = drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_AGP_ALLOC, (unsigned long)request); + err = drm_ioctl(file, DRM_IOCTL_AGP_ALLOC, (unsigned long)request); if (err) return err; if (__get_user(req32.handle, &request->handle) || __get_user(req32.physical, &request->physical) || copy_to_user(argp, &req32, sizeof(req32))) { - drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_AGP_FREE, (unsigned long)request); + drm_ioctl(file, DRM_IOCTL_AGP_FREE, (unsigned long)request); return -EFAULT; } @@ -856,8 +836,7 @@ static int compat_drm_agp_free(struct file *file, unsigned int cmd, || __put_user(handle, &request->handle)) return -EFAULT; - return drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_AGP_FREE, (unsigned long)request); + return drm_ioctl(file, DRM_IOCTL_AGP_FREE, (unsigned long)request); } typedef struct drm_agp_binding32 { @@ -881,8 +860,7 @@ static int compat_drm_agp_bind(struct file *file, unsigned int cmd, || __put_user(req32.offset, &request->offset)) return -EFAULT; - return drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_AGP_BIND, (unsigned long)request); + return drm_ioctl(file, DRM_IOCTL_AGP_BIND, (unsigned long)request); } static int compat_drm_agp_unbind(struct file *file, unsigned int cmd, @@ -898,8 +876,7 @@ static int compat_drm_agp_unbind(struct file *file, unsigned int cmd, || __put_user(handle, &request->handle)) return -EFAULT; - return drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_AGP_UNBIND, (unsigned long)request); + return drm_ioctl(file, DRM_IOCTL_AGP_UNBIND, (unsigned long)request); } #endif /* __OS_HAS_AGP */ @@ -923,8 +900,7 @@ static int compat_drm_sg_alloc(struct file *file, unsigned int cmd, || __put_user(x, &request->size)) return -EFAULT; - err = drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_SG_ALLOC, (unsigned long)request); + err = drm_ioctl(file, DRM_IOCTL_SG_ALLOC, (unsigned long)request); if (err) return err; @@ -950,8 +926,7 @@ static int compat_drm_sg_free(struct file *file, unsigned int cmd, || __put_user(x << PAGE_SHIFT, &request->handle)) return -EFAULT; - return drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_SG_FREE, (unsigned long)request); + return drm_ioctl(file, DRM_IOCTL_SG_FREE, (unsigned long)request); } #if defined(CONFIG_X86) || defined(CONFIG_IA64) @@ -981,8 +956,7 @@ static int compat_drm_update_draw(struct file *file, unsigned int cmd, __put_user(update32.data, &request->data)) return -EFAULT; - err = drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_UPDATE_DRAW, (unsigned long)request); + err = drm_ioctl(file, DRM_IOCTL_UPDATE_DRAW, (unsigned long)request); return err; } #endif @@ -1023,8 +997,7 @@ static int compat_drm_wait_vblank(struct file *file, unsigned int cmd, || __put_user(req32.request.signal, &request->request.signal)) return -EFAULT; - err = drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_WAIT_VBLANK, (unsigned long)request); + err = drm_ioctl(file, DRM_IOCTL_WAIT_VBLANK, (unsigned long)request); if (err) return err; @@ -1094,16 +1067,14 @@ long drm_compat_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) * than always failing. */ if (nr >= ARRAY_SIZE(drm_compat_ioctls)) - return drm_ioctl(filp->f_dentry->d_inode, filp, cmd, arg); + return drm_ioctl(filp, cmd, arg); fn = drm_compat_ioctls[nr]; - lock_kernel(); /* XXX for now */ if (fn != NULL) ret = (*fn) (filp, cmd, arg); else - ret = drm_ioctl(filp->f_path.dentry->d_inode, filp, cmd, arg); - unlock_kernel(); + ret = drm_ioctl(filp, cmd, arg); return ret; } diff --git a/drivers/gpu/drm/drm_mm.c b/drivers/gpu/drm/drm_mm.c index d7d7eac3ddd2..cdec32977129 100644 --- a/drivers/gpu/drm/drm_mm.c +++ b/drivers/gpu/drm/drm_mm.c @@ -358,7 +358,7 @@ struct drm_mm_node *drm_mm_search_free(const struct drm_mm *mm, if (entry->size >= size + wasted) { if (!best_match) return entry; - if (size < best_size) { + if (entry->size < best_size) { best = entry; best_size = entry->size; } @@ -408,7 +408,7 @@ struct drm_mm_node *drm_mm_search_free_in_range(const struct drm_mm *mm, if (entry->size >= size + wasted) { if (!best_match) return entry; - if (size < best_size) { + if (entry->size < best_size) { best = entry; best_size = entry->size; } diff --git a/drivers/gpu/drm/i2c/ch7006_drv.c b/drivers/gpu/drm/i2c/ch7006_drv.c index 9422a74c8b54..81681a07a806 100644 --- a/drivers/gpu/drm/i2c/ch7006_drv.c +++ b/drivers/gpu/drm/i2c/ch7006_drv.c @@ -408,6 +408,11 @@ static int ch7006_probe(struct i2c_client *client, const struct i2c_device_id *i ch7006_info(client, "Detected version ID: %x\n", val); + /* I don't know what this is for, but otherwise I get no + * signal. + */ + ch7006_write(client, 0x3d, 0x0); + return 0; fail: diff --git a/drivers/gpu/drm/i2c/ch7006_mode.c b/drivers/gpu/drm/i2c/ch7006_mode.c index 87f5445092e8..e447dfb63890 100644 --- a/drivers/gpu/drm/i2c/ch7006_mode.c +++ b/drivers/gpu/drm/i2c/ch7006_mode.c @@ -427,11 +427,6 @@ void ch7006_state_load(struct i2c_client *client, ch7006_load_reg(client, state, CH7006_SUBC_INC7); ch7006_load_reg(client, state, CH7006_PLL_CONTROL); ch7006_load_reg(client, state, CH7006_CALC_SUBC_INC0); - - /* I don't know what this is for, but otherwise I get no - * signal. - */ - ch7006_write(client, 0x3d, 0x0); } void ch7006_state_save(struct i2c_client *client, diff --git a/drivers/gpu/drm/i810/i810_dma.c b/drivers/gpu/drm/i810/i810_dma.c index 7d1d88cdf2dc..de32d22a8c39 100644 --- a/drivers/gpu/drm/i810/i810_dma.c +++ b/drivers/gpu/drm/i810/i810_dma.c @@ -115,7 +115,7 @@ static int i810_mmap_buffers(struct file *filp, struct vm_area_struct *vma) static const struct file_operations i810_buffer_fops = { .open = drm_open, .release = drm_release, - .ioctl = drm_ioctl, + .unlocked_ioctl = drm_ioctl, .mmap = i810_mmap_buffers, .fasync = drm_fasync, }; diff --git a/drivers/gpu/drm/i810/i810_drv.c b/drivers/gpu/drm/i810/i810_drv.c index fabb9a817966..c1e02752e023 100644 --- a/drivers/gpu/drm/i810/i810_drv.c +++ b/drivers/gpu/drm/i810/i810_drv.c @@ -59,7 +59,7 @@ static struct drm_driver driver = { .owner = THIS_MODULE, .open = drm_open, .release = drm_release, - .ioctl = drm_ioctl, + .unlocked_ioctl = drm_ioctl, .mmap = drm_mmap, .poll = drm_poll, .fasync = drm_fasync, diff --git a/drivers/gpu/drm/i830/i830_dma.c b/drivers/gpu/drm/i830/i830_dma.c index 877bf6cb14a4..06bd732e6463 100644 --- a/drivers/gpu/drm/i830/i830_dma.c +++ b/drivers/gpu/drm/i830/i830_dma.c @@ -117,7 +117,7 @@ static int i830_mmap_buffers(struct file *filp, struct vm_area_struct *vma) static const struct file_operations i830_buffer_fops = { .open = drm_open, .release = drm_release, - .ioctl = drm_ioctl, + .unlocked_ioctl = drm_ioctl, .mmap = i830_mmap_buffers, .fasync = drm_fasync, }; diff --git a/drivers/gpu/drm/i830/i830_drv.c b/drivers/gpu/drm/i830/i830_drv.c index 389597e4a623..44f990bed8f4 100644 --- a/drivers/gpu/drm/i830/i830_drv.c +++ b/drivers/gpu/drm/i830/i830_drv.c @@ -70,7 +70,7 @@ static struct drm_driver driver = { .owner = THIS_MODULE, .open = drm_open, .release = drm_release, - .ioctl = drm_ioctl, + .unlocked_ioctl = drm_ioctl, .mmap = drm_mmap, .poll = drm_poll, .fasync = drm_fasync, diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index 2fa217862058..24286ca168fc 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -329,7 +329,7 @@ static struct drm_driver driver = { .owner = THIS_MODULE, .open = drm_open, .release = drm_release, - .ioctl = drm_ioctl, + .unlocked_ioctl = drm_ioctl, .mmap = drm_gem_mmap, .poll = drm_poll, .fasync = drm_fasync, diff --git a/drivers/gpu/drm/i915/i915_ioc32.c b/drivers/gpu/drm/i915/i915_ioc32.c index 1fe68a251b75..13b028994b2b 100644 --- a/drivers/gpu/drm/i915/i915_ioc32.c +++ b/drivers/gpu/drm/i915/i915_ioc32.c @@ -66,8 +66,7 @@ static int compat_i915_batchbuffer(struct file *file, unsigned int cmd, &batchbuffer->cliprects)) return -EFAULT; - return drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_I915_BATCHBUFFER, + return drm_ioctl(file, DRM_IOCTL_I915_BATCHBUFFER, (unsigned long)batchbuffer); } @@ -102,8 +101,8 @@ static int compat_i915_cmdbuffer(struct file *file, unsigned int cmd, &cmdbuffer->cliprects)) return -EFAULT; - return drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_I915_CMDBUFFER, (unsigned long)cmdbuffer); + return drm_ioctl(file, DRM_IOCTL_I915_CMDBUFFER, + (unsigned long)cmdbuffer); } typedef struct drm_i915_irq_emit32 { @@ -125,8 +124,8 @@ static int compat_i915_irq_emit(struct file *file, unsigned int cmd, &request->irq_seq)) return -EFAULT; - return drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_I915_IRQ_EMIT, (unsigned long)request); + return drm_ioctl(file, DRM_IOCTL_I915_IRQ_EMIT, + (unsigned long)request); } typedef struct drm_i915_getparam32 { int param; @@ -149,8 +148,8 @@ static int compat_i915_getparam(struct file *file, unsigned int cmd, &request->value)) return -EFAULT; - return drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_I915_GETPARAM, (unsigned long)request); + return drm_ioctl(file, DRM_IOCTL_I915_GETPARAM, + (unsigned long)request); } typedef struct drm_i915_mem_alloc32 { @@ -178,8 +177,8 @@ static int compat_i915_alloc(struct file *file, unsigned int cmd, &request->region_offset)) return -EFAULT; - return drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_I915_ALLOC, (unsigned long)request); + return drm_ioctl(file, DRM_IOCTL_I915_ALLOC, + (unsigned long)request); } drm_ioctl_compat_t *i915_compat_ioctls[] = { @@ -211,12 +210,10 @@ long i915_compat_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) if (nr < DRM_COMMAND_BASE + DRM_ARRAY_SIZE(i915_compat_ioctls)) fn = i915_compat_ioctls[nr - DRM_COMMAND_BASE]; - lock_kernel(); /* XXX for now */ if (fn != NULL) ret = (*fn) (filp, cmd, arg); else - ret = drm_ioctl(filp->f_path.dentry->d_inode, filp, cmd, arg); - unlock_kernel(); + ret = drm_ioctl(filp, cmd, arg); return ret; } diff --git a/drivers/gpu/drm/mga/mga_drv.c b/drivers/gpu/drm/mga/mga_drv.c index 97ee566ef749..ddfe16197b59 100644 --- a/drivers/gpu/drm/mga/mga_drv.c +++ b/drivers/gpu/drm/mga/mga_drv.c @@ -68,7 +68,7 @@ static struct drm_driver driver = { .owner = THIS_MODULE, .open = drm_open, .release = drm_release, - .ioctl = drm_ioctl, + .unlocked_ioctl = drm_ioctl, .mmap = drm_mmap, .poll = drm_poll, .fasync = drm_fasync, diff --git a/drivers/gpu/drm/mga/mga_ioc32.c b/drivers/gpu/drm/mga/mga_ioc32.c index 30d00478ddee..c1f877b7bac1 100644 --- a/drivers/gpu/drm/mga/mga_ioc32.c +++ b/drivers/gpu/drm/mga/mga_ioc32.c @@ -100,8 +100,7 @@ static int compat_mga_init(struct file *file, unsigned int cmd, if (err) return -EFAULT; - return drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_MGA_INIT, (unsigned long)init); + return drm_ioctl(file, DRM_IOCTL_MGA_INIT, (unsigned long)init); } typedef struct drm_mga_getparam32 { @@ -125,8 +124,7 @@ static int compat_mga_getparam(struct file *file, unsigned int cmd, &getparam->value)) return -EFAULT; - return drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_MGA_GETPARAM, (unsigned long)getparam); + return drm_ioctl(file, DRM_IOCTL_MGA_GETPARAM, (unsigned long)getparam); } typedef struct drm_mga_drm_bootstrap32 { @@ -166,8 +164,7 @@ static int compat_mga_dma_bootstrap(struct file *file, unsigned int cmd, || __put_user(dma_bootstrap32.agp_size, &dma_bootstrap->agp_size)) return -EFAULT; - err = drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_MGA_DMA_BOOTSTRAP, + err = drm_ioctl(file, DRM_IOCTL_MGA_DMA_BOOTSTRAP, (unsigned long)dma_bootstrap); if (err) return err; @@ -220,12 +217,10 @@ long mga_compat_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) if (nr < DRM_COMMAND_BASE + DRM_ARRAY_SIZE(mga_compat_ioctls)) fn = mga_compat_ioctls[nr - DRM_COMMAND_BASE]; - lock_kernel(); /* XXX for now */ if (fn != NULL) ret = (*fn) (filp, cmd, arg); else - ret = drm_ioctl(filp->f_path.dentry->d_inode, filp, cmd, arg); - unlock_kernel(); + ret = drm_ioctl(filp, cmd, arg); return ret; } diff --git a/drivers/gpu/drm/nouveau/Makefile b/drivers/gpu/drm/nouveau/Makefile index 1d90d4d0144f..48c290b5da8c 100644 --- a/drivers/gpu/drm/nouveau/Makefile +++ b/drivers/gpu/drm/nouveau/Makefile @@ -8,14 +8,15 @@ nouveau-y := nouveau_drv.o nouveau_state.o nouveau_channel.o nouveau_mem.o \ nouveau_sgdma.o nouveau_dma.o \ nouveau_bo.o nouveau_fence.o nouveau_gem.o nouveau_ttm.o \ nouveau_hw.o nouveau_calc.o nouveau_bios.o nouveau_i2c.o \ - nouveau_display.o nouveau_connector.o nouveau_fbcon.o \ - nouveau_dp.o \ + nouveau_display.o nouveau_connector.o nouveau_fbcon.o \ + nouveau_dp.o nouveau_grctx.o \ nv04_timer.o \ nv04_mc.o nv40_mc.o nv50_mc.o \ nv04_fb.o nv10_fb.o nv40_fb.o \ nv04_fifo.o nv10_fifo.o nv40_fifo.o nv50_fifo.o \ nv04_graph.o nv10_graph.o nv20_graph.o \ nv40_graph.o nv50_graph.o \ + nv40_grctx.o \ nv04_instmem.o nv50_instmem.o \ nv50_crtc.o nv50_dac.o nv50_sor.o \ nv50_cursor.o nv50_display.o nv50_fbcon.o \ diff --git a/drivers/gpu/drm/nouveau/nouveau_bios.c b/drivers/gpu/drm/nouveau/nouveau_bios.c index 5eec5ed69489..ba143972769f 100644 --- a/drivers/gpu/drm/nouveau/nouveau_bios.c +++ b/drivers/gpu/drm/nouveau/nouveau_bios.c @@ -181,43 +181,42 @@ struct methods { const char desc[8]; void (*loadbios)(struct drm_device *, uint8_t *); const bool rw; - int score; }; static struct methods nv04_methods[] = { { "PROM", load_vbios_prom, false }, { "PRAMIN", load_vbios_pramin, true }, { "PCIROM", load_vbios_pci, true }, - { } }; static struct methods nv50_methods[] = { { "PRAMIN", load_vbios_pramin, true }, { "PROM", load_vbios_prom, false }, { "PCIROM", load_vbios_pci, true }, - { } }; +#define METHODCNT 3 + static bool NVShadowVBIOS(struct drm_device *dev, uint8_t *data) { struct drm_nouveau_private *dev_priv = dev->dev_private; - struct methods *methods, *method; + struct methods *methods; + int i; int testscore = 3; + int scores[METHODCNT]; if (nouveau_vbios) { - method = nv04_methods; - while (method->loadbios) { - if (!strcasecmp(nouveau_vbios, method->desc)) + methods = nv04_methods; + for (i = 0; i < METHODCNT; i++) + if (!strcasecmp(nouveau_vbios, methods[i].desc)) break; - method++; - } - if (method->loadbios) { + if (i < METHODCNT) { NV_INFO(dev, "Attempting to use BIOS image from %s\n", - method->desc); + methods[i].desc); - method->loadbios(dev, data); - if (score_vbios(dev, data, method->rw)) + methods[i].loadbios(dev, data); + if (score_vbios(dev, data, methods[i].rw)) return true; } @@ -229,28 +228,24 @@ static bool NVShadowVBIOS(struct drm_device *dev, uint8_t *data) else methods = nv50_methods; - method = methods; - while (method->loadbios) { + for (i = 0; i < METHODCNT; i++) { NV_TRACE(dev, "Attempting to load BIOS image from %s\n", - method->desc); + methods[i].desc); data[0] = data[1] = 0; /* avoid reuse of previous image */ - method->loadbios(dev, data); - method->score = score_vbios(dev, data, method->rw); - if (method->score == testscore) + methods[i].loadbios(dev, data); + scores[i] = score_vbios(dev, data, methods[i].rw); + if (scores[i] == testscore) return true; - method++; } while (--testscore > 0) { - method = methods; - while (method->loadbios) { - if (method->score == testscore) { + for (i = 0; i < METHODCNT; i++) { + if (scores[i] == testscore) { NV_TRACE(dev, "Using BIOS image from %s\n", - method->desc); - method->loadbios(dev, data); + methods[i].desc); + methods[i].loadbios(dev, data); return true; } - method++; } } @@ -261,10 +256,7 @@ static bool NVShadowVBIOS(struct drm_device *dev, uint8_t *data) struct init_tbl_entry { char *name; uint8_t id; - int length; - int length_offset; - int length_multiplier; - bool (*handler)(struct nvbios *, uint16_t, struct init_exec *); + int (*handler)(struct nvbios *, uint16_t, struct init_exec *); }; struct bit_entry { @@ -820,7 +812,7 @@ static uint32_t get_tmds_index_reg(struct drm_device *dev, uint8_t mlv) } } -static bool +static int init_io_restrict_prog(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { @@ -852,9 +844,10 @@ init_io_restrict_prog(struct nvbios *bios, uint16_t offset, uint32_t reg = ROM32(bios->data[offset + 7]); uint8_t config; uint32_t configval; + int len = 11 + count * 4; if (!iexec->execute) - return true; + return len; BIOSLOG(bios, "0x%04X: Port: 0x%04X, Index: 0x%02X, Mask: 0x%02X, " "Shift: 0x%02X, Count: 0x%02X, Reg: 0x%08X\n", @@ -865,7 +858,7 @@ init_io_restrict_prog(struct nvbios *bios, uint16_t offset, NV_ERROR(bios->dev, "0x%04X: Config 0x%02X exceeds maximal bound 0x%02X\n", offset, config, count); - return false; + return 0; } configval = ROM32(bios->data[offset + 11 + config * 4]); @@ -874,10 +867,10 @@ init_io_restrict_prog(struct nvbios *bios, uint16_t offset, bios_wr32(bios, reg, configval); - return true; + return len; } -static bool +static int init_repeat(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -912,10 +905,10 @@ init_repeat(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) iexec->repeat = false; - return true; + return 2; } -static bool +static int init_io_restrict_pll(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { @@ -951,9 +944,10 @@ init_io_restrict_pll(struct nvbios *bios, uint16_t offset, uint32_t reg = ROM32(bios->data[offset + 8]); uint8_t config; uint16_t freq; + int len = 12 + count * 2; if (!iexec->execute) - return true; + return len; BIOSLOG(bios, "0x%04X: Port: 0x%04X, Index: 0x%02X, Mask: 0x%02X, " "Shift: 0x%02X, IO Flag Condition: 0x%02X, " @@ -966,7 +960,7 @@ init_io_restrict_pll(struct nvbios *bios, uint16_t offset, NV_ERROR(bios->dev, "0x%04X: Config 0x%02X exceeds maximal bound 0x%02X\n", offset, config, count); - return false; + return 0; } freq = ROM16(bios->data[offset + 12 + config * 2]); @@ -986,10 +980,10 @@ init_io_restrict_pll(struct nvbios *bios, uint16_t offset, setPLL(bios, reg, freq * 10); - return true; + return len; } -static bool +static int init_end_repeat(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -1007,12 +1001,12 @@ init_end_repeat(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) * we're not in repeat mode */ if (iexec->repeat) - return false; + return 0; - return true; + return 1; } -static bool +static int init_copy(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -1041,7 +1035,7 @@ init_copy(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) uint8_t crtcdata; if (!iexec->execute) - return true; + return 11; BIOSLOG(bios, "0x%04X: Reg: 0x%08X, Shift: 0x%02X, SrcMask: 0x%02X, " "Port: 0x%04X, Index: 0x%02X, Mask: 0x%02X\n", @@ -1060,10 +1054,10 @@ init_copy(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) crtcdata |= (uint8_t)data; bios_idxprt_wr(bios, crtcport, crtcindex, crtcdata); - return true; + return 11; } -static bool +static int init_not(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -1079,10 +1073,10 @@ init_not(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) BIOSLOG(bios, "0x%04X: ------ Executing following commands ------\n", offset); iexec->execute = !iexec->execute; - return true; + return 1; } -static bool +static int init_io_flag_condition(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { @@ -1100,7 +1094,7 @@ init_io_flag_condition(struct nvbios *bios, uint16_t offset, uint8_t cond = bios->data[offset + 1]; if (!iexec->execute) - return true; + return 2; if (io_flag_condition_met(bios, offset, cond)) BIOSLOG(bios, "0x%04X: Condition fulfilled -- continuing to execute\n", offset); @@ -1109,10 +1103,10 @@ init_io_flag_condition(struct nvbios *bios, uint16_t offset, iexec->execute = false; } - return true; + return 2; } -static bool +static int init_idx_addr_latched(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { @@ -1140,11 +1134,12 @@ init_idx_addr_latched(struct nvbios *bios, uint16_t offset, uint32_t mask = ROM32(bios->data[offset + 9]); uint32_t data = ROM32(bios->data[offset + 13]); uint8_t count = bios->data[offset + 17]; + int len = 18 + count * 2; uint32_t value; int i; if (!iexec->execute) - return true; + return len; BIOSLOG(bios, "0x%04X: ControlReg: 0x%08X, DataReg: 0x%08X, " "Mask: 0x%08X, Data: 0x%08X, Count: 0x%02X\n", @@ -1164,10 +1159,10 @@ init_idx_addr_latched(struct nvbios *bios, uint16_t offset, bios_wr32(bios, controlreg, value); } - return true; + return len; } -static bool +static int init_io_restrict_pll2(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { @@ -1196,25 +1191,26 @@ init_io_restrict_pll2(struct nvbios *bios, uint16_t offset, uint8_t shift = bios->data[offset + 5]; uint8_t count = bios->data[offset + 6]; uint32_t reg = ROM32(bios->data[offset + 7]); + int len = 11 + count * 4; uint8_t config; uint32_t freq; if (!iexec->execute) - return true; + return len; BIOSLOG(bios, "0x%04X: Port: 0x%04X, Index: 0x%02X, Mask: 0x%02X, " "Shift: 0x%02X, Count: 0x%02X, Reg: 0x%08X\n", offset, crtcport, crtcindex, mask, shift, count, reg); if (!reg) - return true; + return len; config = (bios_idxprt_rd(bios, crtcport, crtcindex) & mask) >> shift; if (config > count) { NV_ERROR(bios->dev, "0x%04X: Config 0x%02X exceeds maximal bound 0x%02X\n", offset, config, count); - return false; + return 0; } freq = ROM32(bios->data[offset + 11 + config * 4]); @@ -1224,10 +1220,10 @@ init_io_restrict_pll2(struct nvbios *bios, uint16_t offset, setPLL(bios, reg, freq); - return true; + return len; } -static bool +static int init_pll2(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -1244,16 +1240,16 @@ init_pll2(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) uint32_t freq = ROM32(bios->data[offset + 5]); if (!iexec->execute) - return true; + return 9; BIOSLOG(bios, "0x%04X: Reg: 0x%04X, Freq: %dkHz\n", offset, reg, freq); setPLL(bios, reg, freq); - return true; + return 9; } -static bool +static int init_i2c_byte(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -1277,12 +1273,13 @@ init_i2c_byte(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) uint8_t i2c_index = bios->data[offset + 1]; uint8_t i2c_address = bios->data[offset + 2]; uint8_t count = bios->data[offset + 3]; + int len = 4 + count * 3; struct nouveau_i2c_chan *chan; struct i2c_msg msg; int i; if (!iexec->execute) - return true; + return len; BIOSLOG(bios, "0x%04X: DCBI2CIndex: 0x%02X, I2CAddress: 0x%02X, " "Count: 0x%02X\n", @@ -1290,7 +1287,7 @@ init_i2c_byte(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) chan = init_i2c_device_find(bios->dev, i2c_index); if (!chan) - return false; + return 0; for (i = 0; i < count; i++) { uint8_t i2c_reg = bios->data[offset + 4 + i * 3]; @@ -1303,7 +1300,7 @@ init_i2c_byte(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) msg.len = 1; msg.buf = &value; if (i2c_transfer(&chan->adapter, &msg, 1) != 1) - return false; + return 0; BIOSLOG(bios, "0x%04X: I2CReg: 0x%02X, Value: 0x%02X, " "Mask: 0x%02X, Data: 0x%02X\n", @@ -1317,14 +1314,14 @@ init_i2c_byte(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) msg.len = 1; msg.buf = &value; if (i2c_transfer(&chan->adapter, &msg, 1) != 1) - return false; + return 0; } } - return true; + return len; } -static bool +static int init_zm_i2c_byte(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -1346,12 +1343,13 @@ init_zm_i2c_byte(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) uint8_t i2c_index = bios->data[offset + 1]; uint8_t i2c_address = bios->data[offset + 2]; uint8_t count = bios->data[offset + 3]; + int len = 4 + count * 2; struct nouveau_i2c_chan *chan; struct i2c_msg msg; int i; if (!iexec->execute) - return true; + return len; BIOSLOG(bios, "0x%04X: DCBI2CIndex: 0x%02X, I2CAddress: 0x%02X, " "Count: 0x%02X\n", @@ -1359,7 +1357,7 @@ init_zm_i2c_byte(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) chan = init_i2c_device_find(bios->dev, i2c_index); if (!chan) - return false; + return 0; for (i = 0; i < count; i++) { uint8_t i2c_reg = bios->data[offset + 4 + i * 2]; @@ -1374,14 +1372,14 @@ init_zm_i2c_byte(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) msg.len = 1; msg.buf = &data; if (i2c_transfer(&chan->adapter, &msg, 1) != 1) - return false; + return 0; } } - return true; + return len; } -static bool +static int init_zm_i2c(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -1401,13 +1399,14 @@ init_zm_i2c(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) uint8_t i2c_index = bios->data[offset + 1]; uint8_t i2c_address = bios->data[offset + 2]; uint8_t count = bios->data[offset + 3]; + int len = 4 + count; struct nouveau_i2c_chan *chan; struct i2c_msg msg; uint8_t data[256]; int i; if (!iexec->execute) - return true; + return len; BIOSLOG(bios, "0x%04X: DCBI2CIndex: 0x%02X, I2CAddress: 0x%02X, " "Count: 0x%02X\n", @@ -1415,7 +1414,7 @@ init_zm_i2c(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) chan = init_i2c_device_find(bios->dev, i2c_index); if (!chan) - return false; + return 0; for (i = 0; i < count; i++) { data[i] = bios->data[offset + 4 + i]; @@ -1429,13 +1428,13 @@ init_zm_i2c(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) msg.len = count; msg.buf = data; if (i2c_transfer(&chan->adapter, &msg, 1) != 1) - return false; + return 0; } - return true; + return len; } -static bool +static int init_tmds(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -1460,7 +1459,7 @@ init_tmds(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) uint32_t reg, value; if (!iexec->execute) - return true; + return 5; BIOSLOG(bios, "0x%04X: MagicLookupValue: 0x%02X, TMDSAddr: 0x%02X, " "Mask: 0x%02X, Data: 0x%02X\n", @@ -1468,7 +1467,7 @@ init_tmds(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) reg = get_tmds_index_reg(bios->dev, mlv); if (!reg) - return false; + return 0; bios_wr32(bios, reg, tmdsaddr | NV_PRAMDAC_FP_TMDS_CONTROL_WRITE_DISABLE); @@ -1476,10 +1475,10 @@ init_tmds(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) bios_wr32(bios, reg + 4, value); bios_wr32(bios, reg, tmdsaddr); - return true; + return 5; } -static bool +static int init_zm_tmds_group(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { @@ -1500,18 +1499,19 @@ init_zm_tmds_group(struct nvbios *bios, uint16_t offset, uint8_t mlv = bios->data[offset + 1]; uint8_t count = bios->data[offset + 2]; + int len = 3 + count * 2; uint32_t reg; int i; if (!iexec->execute) - return true; + return len; BIOSLOG(bios, "0x%04X: MagicLookupValue: 0x%02X, Count: 0x%02X\n", offset, mlv, count); reg = get_tmds_index_reg(bios->dev, mlv); if (!reg) - return false; + return 0; for (i = 0; i < count; i++) { uint8_t tmdsaddr = bios->data[offset + 3 + i * 2]; @@ -1521,10 +1521,10 @@ init_zm_tmds_group(struct nvbios *bios, uint16_t offset, bios_wr32(bios, reg, tmdsaddr); } - return true; + return len; } -static bool +static int init_cr_idx_adr_latch(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { @@ -1547,11 +1547,12 @@ init_cr_idx_adr_latch(struct nvbios *bios, uint16_t offset, uint8_t crtcindex2 = bios->data[offset + 2]; uint8_t baseaddr = bios->data[offset + 3]; uint8_t count = bios->data[offset + 4]; + int len = 5 + count; uint8_t oldaddr, data; int i; if (!iexec->execute) - return true; + return len; BIOSLOG(bios, "0x%04X: Index1: 0x%02X, Index2: 0x%02X, " "BaseAddr: 0x%02X, Count: 0x%02X\n", @@ -1568,10 +1569,10 @@ init_cr_idx_adr_latch(struct nvbios *bios, uint16_t offset, bios_idxprt_wr(bios, NV_CIO_CRX__COLOR, crtcindex1, oldaddr); - return true; + return len; } -static bool +static int init_cr(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -1592,7 +1593,7 @@ init_cr(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) uint8_t value; if (!iexec->execute) - return true; + return 4; BIOSLOG(bios, "0x%04X: Index: 0x%02X, Mask: 0x%02X, Data: 0x%02X\n", offset, crtcindex, mask, data); @@ -1601,10 +1602,10 @@ init_cr(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) value |= data; bios_idxprt_wr(bios, NV_CIO_CRX__COLOR, crtcindex, value); - return true; + return 4; } -static bool +static int init_zm_cr(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -1621,14 +1622,14 @@ init_zm_cr(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) uint8_t data = bios->data[offset + 2]; if (!iexec->execute) - return true; + return 3; bios_idxprt_wr(bios, NV_CIO_CRX__COLOR, crtcindex, data); - return true; + return 3; } -static bool +static int init_zm_cr_group(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -1645,18 +1646,19 @@ init_zm_cr_group(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) */ uint8_t count = bios->data[offset + 1]; + int len = 2 + count * 2; int i; if (!iexec->execute) - return true; + return len; for (i = 0; i < count; i++) init_zm_cr(bios, offset + 2 + 2 * i - 1, iexec); - return true; + return len; } -static bool +static int init_condition_time(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { @@ -1680,7 +1682,7 @@ init_condition_time(struct nvbios *bios, uint16_t offset, unsigned cnt; if (!iexec->execute) - return true; + return 3; if (retries > 100) retries = 100; @@ -1711,10 +1713,10 @@ init_condition_time(struct nvbios *bios, uint16_t offset, iexec->execute = false; } - return true; + return 3; } -static bool +static int init_zm_reg_sequence(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { @@ -1734,10 +1736,11 @@ init_zm_reg_sequence(struct nvbios *bios, uint16_t offset, uint32_t basereg = ROM32(bios->data[offset + 1]); uint32_t count = bios->data[offset + 5]; + int len = 6 + count * 4; int i; if (!iexec->execute) - return true; + return len; BIOSLOG(bios, "0x%04X: BaseReg: 0x%08X, Count: 0x%02X\n", offset, basereg, count); @@ -1749,10 +1752,10 @@ init_zm_reg_sequence(struct nvbios *bios, uint16_t offset, bios_wr32(bios, reg, data); } - return true; + return len; } -static bool +static int init_sub_direct(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -1768,7 +1771,7 @@ init_sub_direct(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) uint16_t sub_offset = ROM16(bios->data[offset + 1]); if (!iexec->execute) - return true; + return 3; BIOSLOG(bios, "0x%04X: Executing subroutine at 0x%04X\n", offset, sub_offset); @@ -1777,10 +1780,10 @@ init_sub_direct(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) BIOSLOG(bios, "0x%04X: End of 0x%04X subroutine\n", offset, sub_offset); - return true; + return 3; } -static bool +static int init_copy_nv_reg(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -1808,7 +1811,7 @@ init_copy_nv_reg(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) uint32_t srcvalue, dstvalue; if (!iexec->execute) - return true; + return 22; BIOSLOG(bios, "0x%04X: SrcReg: 0x%08X, Shift: 0x%02X, SrcMask: 0x%08X, " "Xor: 0x%08X, DstReg: 0x%08X, DstMask: 0x%08X\n", @@ -1827,10 +1830,10 @@ init_copy_nv_reg(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) bios_wr32(bios, dstreg, dstvalue | srcvalue); - return true; + return 22; } -static bool +static int init_zm_index_io(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -1848,14 +1851,14 @@ init_zm_index_io(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) uint8_t data = bios->data[offset + 4]; if (!iexec->execute) - return true; + return 5; bios_idxprt_wr(bios, crtcport, crtcindex, data); - return true; + return 5; } -static bool +static int init_compute_mem(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -1904,7 +1907,7 @@ init_compute_mem(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) struct drm_nouveau_private *dev_priv = bios->dev->dev_private; if (dev_priv->card_type >= NV_50) - return true; + return 1; /* * On every card I've seen, this step gets done for us earlier in @@ -1922,10 +1925,10 @@ init_compute_mem(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) /* write back the saved configuration value */ bios_wr32(bios, NV_PFB_CFG0, bios->state.saved_nv_pfb_cfg0); - return true; + return 1; } -static bool +static int init_reset(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -1959,10 +1962,10 @@ init_reset(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) pci_nv_20 &= ~NV_PBUS_PCI_NV_20_ROM_SHADOW_ENABLED; /* 0xfffffffe */ bios_wr32(bios, NV_PBUS_PCI_NV_20, pci_nv_20); - return true; + return 13; } -static bool +static int init_configure_mem(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { @@ -1983,7 +1986,7 @@ init_configure_mem(struct nvbios *bios, uint16_t offset, uint32_t reg, data; if (bios->major_version > 2) - return false; + return 0; bios_idxprt_wr(bios, NV_VIO_SRX, NV_VIO_SR_CLOCK_INDEX, bios_idxprt_rd( bios, NV_VIO_SRX, NV_VIO_SR_CLOCK_INDEX) | 0x20); @@ -2015,10 +2018,10 @@ init_configure_mem(struct nvbios *bios, uint16_t offset, bios_wr32(bios, reg, data); } - return true; + return 1; } -static bool +static int init_configure_clk(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { @@ -2038,7 +2041,7 @@ init_configure_clk(struct nvbios *bios, uint16_t offset, int clock; if (bios->major_version > 2) - return false; + return 0; clock = ROM16(bios->data[meminitoffs + 4]) * 10; setPLL(bios, NV_PRAMDAC_NVPLL_COEFF, clock); @@ -2048,10 +2051,10 @@ init_configure_clk(struct nvbios *bios, uint16_t offset, clock *= 2; setPLL(bios, NV_PRAMDAC_MPLL_COEFF, clock); - return true; + return 1; } -static bool +static int init_configure_preinit(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { @@ -2071,15 +2074,15 @@ init_configure_preinit(struct nvbios *bios, uint16_t offset, uint8_t cr3c = ((straps << 2) & 0xf0) | (straps & (1 << 6)); if (bios->major_version > 2) - return false; + return 0; bios_idxprt_wr(bios, NV_CIO_CRX__COLOR, NV_CIO_CRE_SCRATCH4__INDEX, cr3c); - return true; + return 1; } -static bool +static int init_io(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -2099,7 +2102,7 @@ init_io(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) uint8_t data = bios->data[offset + 4]; if (!iexec->execute) - return true; + return 5; BIOSLOG(bios, "0x%04X: Port: 0x%04X, Mask: 0x%02X, Data: 0x%02X\n", offset, crtcport, mask, data); @@ -2158,15 +2161,15 @@ init_io(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) for (i = 0; i < 2; i++) bios_wr32(bios, 0x614108 + (i*0x800), bios_rd32( bios, 0x614108 + (i*0x800)) & 0x0fffffff); - return true; + return 5; } bios_port_wr(bios, crtcport, (bios_port_rd(bios, crtcport) & mask) | data); - return true; + return 5; } -static bool +static int init_sub(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -2181,7 +2184,7 @@ init_sub(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) uint8_t sub = bios->data[offset + 1]; if (!iexec->execute) - return true; + return 2; BIOSLOG(bios, "0x%04X: Calling script %d\n", offset, sub); @@ -2191,10 +2194,10 @@ init_sub(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) BIOSLOG(bios, "0x%04X: End of script %d\n", offset, sub); - return true; + return 2; } -static bool +static int init_ram_condition(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { @@ -2215,7 +2218,7 @@ init_ram_condition(struct nvbios *bios, uint16_t offset, uint8_t data; if (!iexec->execute) - return true; + return 3; data = bios_rd32(bios, NV_PFB_BOOT_0) & mask; @@ -2229,10 +2232,10 @@ init_ram_condition(struct nvbios *bios, uint16_t offset, iexec->execute = false; } - return true; + return 3; } -static bool +static int init_nv_reg(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -2251,17 +2254,17 @@ init_nv_reg(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) uint32_t data = ROM32(bios->data[offset + 9]); if (!iexec->execute) - return true; + return 13; BIOSLOG(bios, "0x%04X: Reg: 0x%08X, Mask: 0x%08X, Data: 0x%08X\n", offset, reg, mask, data); bios_wr32(bios, reg, (bios_rd32(bios, reg) & mask) | data); - return true; + return 13; } -static bool +static int init_macro(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -2285,7 +2288,7 @@ init_macro(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) int i; if (!iexec->execute) - return true; + return 2; BIOSLOG(bios, "0x%04X: Macro: 0x%02X, MacroTableIndex: 0x%02X, " "Count: 0x%02X\n", @@ -2300,10 +2303,10 @@ init_macro(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) bios_wr32(bios, reg, data); } - return true; + return 2; } -static bool +static int init_done(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -2315,10 +2318,10 @@ init_done(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) */ /* mild retval abuse to stop parsing this table */ - return false; + return 0; } -static bool +static int init_resume(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -2330,15 +2333,15 @@ init_resume(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) */ if (iexec->execute) - return true; + return 1; iexec->execute = true; BIOSLOG(bios, "0x%04X: ---- Executing following commands ----\n", offset); - return true; + return 1; } -static bool +static int init_time(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -2353,7 +2356,7 @@ init_time(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) unsigned time = ROM16(bios->data[offset + 1]); if (!iexec->execute) - return true; + return 3; BIOSLOG(bios, "0x%04X: Sleeping for 0x%04X microseconds\n", offset, time); @@ -2363,10 +2366,10 @@ init_time(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) else msleep((time + 900) / 1000); - return true; + return 3; } -static bool +static int init_condition(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -2383,7 +2386,7 @@ init_condition(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) uint8_t cond = bios->data[offset + 1]; if (!iexec->execute) - return true; + return 2; BIOSLOG(bios, "0x%04X: Condition: 0x%02X\n", offset, cond); @@ -2394,10 +2397,10 @@ init_condition(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) iexec->execute = false; } - return true; + return 2; } -static bool +static int init_io_condition(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -2414,7 +2417,7 @@ init_io_condition(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) uint8_t cond = bios->data[offset + 1]; if (!iexec->execute) - return true; + return 2; BIOSLOG(bios, "0x%04X: IO condition: 0x%02X\n", offset, cond); @@ -2425,10 +2428,10 @@ init_io_condition(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) iexec->execute = false; } - return true; + return 2; } -static bool +static int init_index_io(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -2451,7 +2454,7 @@ init_index_io(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) uint8_t value; if (!iexec->execute) - return true; + return 6; BIOSLOG(bios, "0x%04X: Port: 0x%04X, Index: 0x%02X, Mask: 0x%02X, " "Data: 0x%02X\n", @@ -2460,10 +2463,10 @@ init_index_io(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) value = (bios_idxprt_rd(bios, crtcport, crtcindex) & mask) | data; bios_idxprt_wr(bios, crtcport, crtcindex, value); - return true; + return 6; } -static bool +static int init_pll(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -2481,16 +2484,16 @@ init_pll(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) uint16_t freq = ROM16(bios->data[offset + 5]); if (!iexec->execute) - return true; + return 7; BIOSLOG(bios, "0x%04X: Reg: 0x%08X, Freq: %d0kHz\n", offset, reg, freq); setPLL(bios, reg, freq * 10); - return true; + return 7; } -static bool +static int init_zm_reg(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -2507,17 +2510,17 @@ init_zm_reg(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) uint32_t value = ROM32(bios->data[offset + 5]); if (!iexec->execute) - return true; + return 9; if (reg == 0x000200) value |= 1; bios_wr32(bios, reg, value); - return true; + return 9; } -static bool +static int init_ram_restrict_pll(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { @@ -2543,14 +2546,15 @@ init_ram_restrict_pll(struct nvbios *bios, uint16_t offset, uint8_t type = bios->data[offset + 1]; uint32_t freq = ROM32(bios->data[offset + 2 + (index * 4)]); uint8_t *pll_limits = &bios->data[bios->pll_limit_tbl_ptr], *entry; + int len = 2 + bios->ram_restrict_group_count * 4; int i; if (!iexec->execute) - return true; + return len; if (!bios->pll_limit_tbl_ptr || (pll_limits[0] & 0xf0) != 0x30) { NV_ERROR(dev, "PLL limits table not version 3.x\n"); - return true; /* deliberate, allow default clocks to remain */ + return len; /* deliberate, allow default clocks to remain */ } entry = pll_limits + pll_limits[1]; @@ -2563,15 +2567,15 @@ init_ram_restrict_pll(struct nvbios *bios, uint16_t offset, offset, type, reg, freq); setPLL(bios, reg, freq); - return true; + return len; } } NV_ERROR(dev, "PLL type 0x%02x not found in PLL limits table", type); - return true; + return len; } -static bool +static int init_8c(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -2581,10 +2585,10 @@ init_8c(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) * */ - return true; + return 1; } -static bool +static int init_8d(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -2594,10 +2598,10 @@ init_8d(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) * */ - return true; + return 1; } -static bool +static int init_gpio(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -2615,14 +2619,17 @@ init_gpio(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) const uint8_t *gpio_entry; int i; + if (!iexec->execute) + return 1; + if (bios->bdcb.version != 0x40) { NV_ERROR(bios->dev, "DCB table not version 4.0\n"); - return false; + return 0; } if (!bios->bdcb.gpio_table_ptr) { NV_WARN(bios->dev, "Invalid pointer to INIT_8E table\n"); - return false; + return 0; } gpio_entry = gpio_table + gpio_table[1]; @@ -2660,13 +2667,10 @@ init_gpio(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) bios_wr32(bios, r, v); } - return true; + return 1; } -/* hack to avoid moving the itbl_entry array before this function */ -int init_ram_restrict_zm_reg_group_blocklen; - -static bool +static int init_ram_restrict_zm_reg_group(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { @@ -2692,21 +2696,21 @@ init_ram_restrict_zm_reg_group(struct nvbios *bios, uint16_t offset, uint8_t regincrement = bios->data[offset + 5]; uint8_t count = bios->data[offset + 6]; uint32_t strap_ramcfg, data; - uint16_t blocklen; + /* previously set by 'M' BIT table */ + uint16_t blocklen = bios->ram_restrict_group_count * 4; + int len = 7 + count * blocklen; uint8_t index; int i; - /* previously set by 'M' BIT table */ - blocklen = init_ram_restrict_zm_reg_group_blocklen; if (!iexec->execute) - return true; + return len; if (!blocklen) { NV_ERROR(bios->dev, "0x%04X: Zero block length - has the M table " "been parsed?\n", offset); - return false; + return 0; } strap_ramcfg = (bios_rd32(bios, NV_PEXTDEV_BOOT_0) >> 2) & 0xf; @@ -2724,10 +2728,10 @@ init_ram_restrict_zm_reg_group(struct nvbios *bios, uint16_t offset, reg += regincrement; } - return true; + return len; } -static bool +static int init_copy_zm_reg(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -2744,14 +2748,14 @@ init_copy_zm_reg(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) uint32_t dstreg = ROM32(bios->data[offset + 5]); if (!iexec->execute) - return true; + return 9; bios_wr32(bios, dstreg, bios_rd32(bios, srcreg)); - return true; + return 9; } -static bool +static int init_zm_reg_group_addr_latched(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { @@ -2769,20 +2773,21 @@ init_zm_reg_group_addr_latched(struct nvbios *bios, uint16_t offset, uint32_t reg = ROM32(bios->data[offset + 1]); uint8_t count = bios->data[offset + 5]; + int len = 6 + count * 4; int i; if (!iexec->execute) - return true; + return len; for (i = 0; i < count; i++) { uint32_t data = ROM32(bios->data[offset + 6 + 4 * i]); bios_wr32(bios, reg, data); } - return true; + return len; } -static bool +static int init_reserved(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -2793,10 +2798,10 @@ init_reserved(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) * Seemingly does nothing */ - return true; + return 1; } -static bool +static int init_96(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -2829,13 +2834,13 @@ init_96(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) val <<= bios->data[offset + 16]; if (!iexec->execute) - return true; + return 17; bios_wr32(bios, reg, (bios_rd32(bios, reg) & mask) | val); - return true; + return 17; } -static bool +static int init_97(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -2859,13 +2864,13 @@ init_97(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) val = (val & mask) | ((val + add) & ~mask); if (!iexec->execute) - return true; + return 13; bios_wr32(bios, reg, val); - return true; + return 13; } -static bool +static int init_auxch(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -2883,32 +2888,33 @@ init_auxch(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) struct drm_device *dev = bios->dev; struct nouveau_i2c_chan *auxch; uint32_t addr = ROM32(bios->data[offset + 1]); - uint8_t len = bios->data[offset + 5]; + uint8_t count = bios->data[offset + 5]; + int len = 6 + count * 2; int ret, i; if (!bios->display.output) { NV_ERROR(dev, "INIT_AUXCH: no active output\n"); - return false; + return 0; } auxch = init_i2c_device_find(dev, bios->display.output->i2c_index); if (!auxch) { NV_ERROR(dev, "INIT_AUXCH: couldn't get auxch %d\n", bios->display.output->i2c_index); - return false; + return 0; } if (!iexec->execute) - return true; + return len; offset += 6; - for (i = 0; i < len; i++, offset += 2) { + for (i = 0; i < count; i++, offset += 2) { uint8_t data; ret = nouveau_dp_auxch(auxch, 9, addr, &data, 1); if (ret) { NV_ERROR(dev, "INIT_AUXCH: rd auxch fail %d\n", ret); - return false; + return 0; } data &= bios->data[offset + 0]; @@ -2917,14 +2923,14 @@ init_auxch(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) ret = nouveau_dp_auxch(auxch, 8, addr, &data, 1); if (ret) { NV_ERROR(dev, "INIT_AUXCH: wr auxch fail %d\n", ret); - return false; + return 0; } } - return true; + return len; } -static bool +static int init_zm_auxch(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) { /* @@ -2941,106 +2947,99 @@ init_zm_auxch(struct nvbios *bios, uint16_t offset, struct init_exec *iexec) struct drm_device *dev = bios->dev; struct nouveau_i2c_chan *auxch; uint32_t addr = ROM32(bios->data[offset + 1]); - uint8_t len = bios->data[offset + 5]; + uint8_t count = bios->data[offset + 5]; + int len = 6 + count; int ret, i; if (!bios->display.output) { NV_ERROR(dev, "INIT_ZM_AUXCH: no active output\n"); - return false; + return 0; } auxch = init_i2c_device_find(dev, bios->display.output->i2c_index); if (!auxch) { NV_ERROR(dev, "INIT_ZM_AUXCH: couldn't get auxch %d\n", bios->display.output->i2c_index); - return false; + return 0; } if (!iexec->execute) - return true; + return len; offset += 6; - for (i = 0; i < len; i++, offset++) { + for (i = 0; i < count; i++, offset++) { ret = nouveau_dp_auxch(auxch, 8, addr, &bios->data[offset], 1); if (ret) { NV_ERROR(dev, "INIT_ZM_AUXCH: wr auxch fail %d\n", ret); - return false; + return 0; } } - return true; + return len; } static struct init_tbl_entry itbl_entry[] = { /* command name , id , length , offset , mult , command handler */ /* INIT_PROG (0x31, 15, 10, 4) removed due to no example of use */ - { "INIT_IO_RESTRICT_PROG" , 0x32, 11 , 6 , 4 , init_io_restrict_prog }, - { "INIT_REPEAT" , 0x33, 2 , 0 , 0 , init_repeat }, - { "INIT_IO_RESTRICT_PLL" , 0x34, 12 , 7 , 2 , init_io_restrict_pll }, - { "INIT_END_REPEAT" , 0x36, 1 , 0 , 0 , init_end_repeat }, - { "INIT_COPY" , 0x37, 11 , 0 , 0 , init_copy }, - { "INIT_NOT" , 0x38, 1 , 0 , 0 , init_not }, - { "INIT_IO_FLAG_CONDITION" , 0x39, 2 , 0 , 0 , init_io_flag_condition }, - { "INIT_INDEX_ADDRESS_LATCHED" , 0x49, 18 , 17 , 2 , init_idx_addr_latched }, - { "INIT_IO_RESTRICT_PLL2" , 0x4A, 11 , 6 , 4 , init_io_restrict_pll2 }, - { "INIT_PLL2" , 0x4B, 9 , 0 , 0 , init_pll2 }, - { "INIT_I2C_BYTE" , 0x4C, 4 , 3 , 3 , init_i2c_byte }, - { "INIT_ZM_I2C_BYTE" , 0x4D, 4 , 3 , 2 , init_zm_i2c_byte }, - { "INIT_ZM_I2C" , 0x4E, 4 , 3 , 1 , init_zm_i2c }, - { "INIT_TMDS" , 0x4F, 5 , 0 , 0 , init_tmds }, - { "INIT_ZM_TMDS_GROUP" , 0x50, 3 , 2 , 2 , init_zm_tmds_group }, - { "INIT_CR_INDEX_ADDRESS_LATCHED" , 0x51, 5 , 4 , 1 , init_cr_idx_adr_latch }, - { "INIT_CR" , 0x52, 4 , 0 , 0 , init_cr }, - { "INIT_ZM_CR" , 0x53, 3 , 0 , 0 , init_zm_cr }, - { "INIT_ZM_CR_GROUP" , 0x54, 2 , 1 , 2 , init_zm_cr_group }, - { "INIT_CONDITION_TIME" , 0x56, 3 , 0 , 0 , init_condition_time }, - { "INIT_ZM_REG_SEQUENCE" , 0x58, 6 , 5 , 4 , init_zm_reg_sequence }, + { "INIT_IO_RESTRICT_PROG" , 0x32, init_io_restrict_prog }, + { "INIT_REPEAT" , 0x33, init_repeat }, + { "INIT_IO_RESTRICT_PLL" , 0x34, init_io_restrict_pll }, + { "INIT_END_REPEAT" , 0x36, init_end_repeat }, + { "INIT_COPY" , 0x37, init_copy }, + { "INIT_NOT" , 0x38, init_not }, + { "INIT_IO_FLAG_CONDITION" , 0x39, init_io_flag_condition }, + { "INIT_INDEX_ADDRESS_LATCHED" , 0x49, init_idx_addr_latched }, + { "INIT_IO_RESTRICT_PLL2" , 0x4A, init_io_restrict_pll2 }, + { "INIT_PLL2" , 0x4B, init_pll2 }, + { "INIT_I2C_BYTE" , 0x4C, init_i2c_byte }, + { "INIT_ZM_I2C_BYTE" , 0x4D, init_zm_i2c_byte }, + { "INIT_ZM_I2C" , 0x4E, init_zm_i2c }, + { "INIT_TMDS" , 0x4F, init_tmds }, + { "INIT_ZM_TMDS_GROUP" , 0x50, init_zm_tmds_group }, + { "INIT_CR_INDEX_ADDRESS_LATCHED" , 0x51, init_cr_idx_adr_latch }, + { "INIT_CR" , 0x52, init_cr }, + { "INIT_ZM_CR" , 0x53, init_zm_cr }, + { "INIT_ZM_CR_GROUP" , 0x54, init_zm_cr_group }, + { "INIT_CONDITION_TIME" , 0x56, init_condition_time }, + { "INIT_ZM_REG_SEQUENCE" , 0x58, init_zm_reg_sequence }, /* INIT_INDIRECT_REG (0x5A, 7, 0, 0) removed due to no example of use */ - { "INIT_SUB_DIRECT" , 0x5B, 3 , 0 , 0 , init_sub_direct }, - { "INIT_COPY_NV_REG" , 0x5F, 22 , 0 , 0 , init_copy_nv_reg }, - { "INIT_ZM_INDEX_IO" , 0x62, 5 , 0 , 0 , init_zm_index_io }, - { "INIT_COMPUTE_MEM" , 0x63, 1 , 0 , 0 , init_compute_mem }, - { "INIT_RESET" , 0x65, 13 , 0 , 0 , init_reset }, - { "INIT_CONFIGURE_MEM" , 0x66, 1 , 0 , 0 , init_configure_mem }, - { "INIT_CONFIGURE_CLK" , 0x67, 1 , 0 , 0 , init_configure_clk }, - { "INIT_CONFIGURE_PREINIT" , 0x68, 1 , 0 , 0 , init_configure_preinit }, - { "INIT_IO" , 0x69, 5 , 0 , 0 , init_io }, - { "INIT_SUB" , 0x6B, 2 , 0 , 0 , init_sub }, - { "INIT_RAM_CONDITION" , 0x6D, 3 , 0 , 0 , init_ram_condition }, - { "INIT_NV_REG" , 0x6E, 13 , 0 , 0 , init_nv_reg }, - { "INIT_MACRO" , 0x6F, 2 , 0 , 0 , init_macro }, - { "INIT_DONE" , 0x71, 1 , 0 , 0 , init_done }, - { "INIT_RESUME" , 0x72, 1 , 0 , 0 , init_resume }, + { "INIT_SUB_DIRECT" , 0x5B, init_sub_direct }, + { "INIT_COPY_NV_REG" , 0x5F, init_copy_nv_reg }, + { "INIT_ZM_INDEX_IO" , 0x62, init_zm_index_io }, + { "INIT_COMPUTE_MEM" , 0x63, init_compute_mem }, + { "INIT_RESET" , 0x65, init_reset }, + { "INIT_CONFIGURE_MEM" , 0x66, init_configure_mem }, + { "INIT_CONFIGURE_CLK" , 0x67, init_configure_clk }, + { "INIT_CONFIGURE_PREINIT" , 0x68, init_configure_preinit }, + { "INIT_IO" , 0x69, init_io }, + { "INIT_SUB" , 0x6B, init_sub }, + { "INIT_RAM_CONDITION" , 0x6D, init_ram_condition }, + { "INIT_NV_REG" , 0x6E, init_nv_reg }, + { "INIT_MACRO" , 0x6F, init_macro }, + { "INIT_DONE" , 0x71, init_done }, + { "INIT_RESUME" , 0x72, init_resume }, /* INIT_RAM_CONDITION2 (0x73, 9, 0, 0) removed due to no example of use */ - { "INIT_TIME" , 0x74, 3 , 0 , 0 , init_time }, - { "INIT_CONDITION" , 0x75, 2 , 0 , 0 , init_condition }, - { "INIT_IO_CONDITION" , 0x76, 2 , 0 , 0 , init_io_condition }, - { "INIT_INDEX_IO" , 0x78, 6 , 0 , 0 , init_index_io }, - { "INIT_PLL" , 0x79, 7 , 0 , 0 , init_pll }, - { "INIT_ZM_REG" , 0x7A, 9 , 0 , 0 , init_zm_reg }, - /* INIT_RAM_RESTRICT_PLL's length is adjusted by the BIT M table */ - { "INIT_RAM_RESTRICT_PLL" , 0x87, 2 , 0 , 0 , init_ram_restrict_pll }, - { "INIT_8C" , 0x8C, 1 , 0 , 0 , init_8c }, - { "INIT_8D" , 0x8D, 1 , 0 , 0 , init_8d }, - { "INIT_GPIO" , 0x8E, 1 , 0 , 0 , init_gpio }, - /* INIT_RAM_RESTRICT_ZM_REG_GROUP's mult is loaded by M table in BIT */ - { "INIT_RAM_RESTRICT_ZM_REG_GROUP" , 0x8F, 7 , 6 , 0 , init_ram_restrict_zm_reg_group }, - { "INIT_COPY_ZM_REG" , 0x90, 9 , 0 , 0 , init_copy_zm_reg }, - { "INIT_ZM_REG_GROUP_ADDRESS_LATCHED" , 0x91, 6 , 5 , 4 , init_zm_reg_group_addr_latched }, - { "INIT_RESERVED" , 0x92, 1 , 0 , 0 , init_reserved }, - { "INIT_96" , 0x96, 17 , 0 , 0 , init_96 }, - { "INIT_97" , 0x97, 13 , 0 , 0 , init_97 }, - { "INIT_AUXCH" , 0x98, 6 , 5 , 2 , init_auxch }, - { "INIT_ZM_AUXCH" , 0x99, 6 , 5 , 1 , init_zm_auxch }, - { NULL , 0 , 0 , 0 , 0 , NULL } + { "INIT_TIME" , 0x74, init_time }, + { "INIT_CONDITION" , 0x75, init_condition }, + { "INIT_IO_CONDITION" , 0x76, init_io_condition }, + { "INIT_INDEX_IO" , 0x78, init_index_io }, + { "INIT_PLL" , 0x79, init_pll }, + { "INIT_ZM_REG" , 0x7A, init_zm_reg }, + { "INIT_RAM_RESTRICT_PLL" , 0x87, init_ram_restrict_pll }, + { "INIT_8C" , 0x8C, init_8c }, + { "INIT_8D" , 0x8D, init_8d }, + { "INIT_GPIO" , 0x8E, init_gpio }, + { "INIT_RAM_RESTRICT_ZM_REG_GROUP" , 0x8F, init_ram_restrict_zm_reg_group }, + { "INIT_COPY_ZM_REG" , 0x90, init_copy_zm_reg }, + { "INIT_ZM_REG_GROUP_ADDRESS_LATCHED" , 0x91, init_zm_reg_group_addr_latched }, + { "INIT_RESERVED" , 0x92, init_reserved }, + { "INIT_96" , 0x96, init_96 }, + { "INIT_97" , 0x97, init_97 }, + { "INIT_AUXCH" , 0x98, init_auxch }, + { "INIT_ZM_AUXCH" , 0x99, init_zm_auxch }, + { NULL , 0 , NULL } }; -static unsigned int get_init_table_entry_length(struct nvbios *bios, unsigned int offset, int i) -{ - /* Calculates the length of a given init table entry. */ - return itbl_entry[i].length + bios->data[offset + itbl_entry[i].length_offset]*itbl_entry[i].length_multiplier; -} - #define MAX_TABLE_OPS 1000 static int @@ -3056,7 +3055,7 @@ parse_init_table(struct nvbios *bios, unsigned int offset, * is changed back to EXECUTE. */ - int count = 0, i; + int count = 0, i, res; uint8_t id; /* @@ -3076,22 +3075,21 @@ parse_init_table(struct nvbios *bios, unsigned int offset, offset, itbl_entry[i].id, itbl_entry[i].name); /* execute eventual command handler */ - if (itbl_entry[i].handler) - if (!(*itbl_entry[i].handler)(bios, offset, iexec)) - break; + res = (*itbl_entry[i].handler)(bios, offset, iexec); + if (!res) + break; + /* + * Add the offset of the current command including all data + * of that command. The offset will then be pointing on the + * next op code. + */ + offset += res; } else { NV_ERROR(bios->dev, "0x%04X: Init table command not found: " "0x%02X\n", offset, id); return -ENOENT; } - - /* - * Add the offset of the current command including all data - * of that command. The offset will then be pointing on the - * next op code. - */ - offset += get_init_table_entry_length(bios, offset, i); } if (offset >= bios->length) @@ -3854,7 +3852,7 @@ nouveau_bios_run_display_table(struct drm_device *dev, struct dcb_entry *dcbent, * script tables is a pointer to the script to execute. */ - NV_DEBUG(dev, "Searching for output entry for %d %d %d\n", + NV_DEBUG_KMS(dev, "Searching for output entry for %d %d %d\n", dcbent->type, dcbent->location, dcbent->or); otable = bios_output_config_match(dev, dcbent, table[1] + bios->display.script_table_ptr, @@ -3884,7 +3882,7 @@ nouveau_bios_run_display_table(struct drm_device *dev, struct dcb_entry *dcbent, if (pxclk == 0) { script = ROM16(otable[6]); if (!script) { - NV_DEBUG(dev, "output script 0 not found\n"); + NV_DEBUG_KMS(dev, "output script 0 not found\n"); return 1; } @@ -3894,7 +3892,7 @@ nouveau_bios_run_display_table(struct drm_device *dev, struct dcb_entry *dcbent, if (pxclk == -1) { script = ROM16(otable[8]); if (!script) { - NV_DEBUG(dev, "output script 1 not found\n"); + NV_DEBUG_KMS(dev, "output script 1 not found\n"); return 1; } @@ -3907,7 +3905,7 @@ nouveau_bios_run_display_table(struct drm_device *dev, struct dcb_entry *dcbent, else script = 0; if (!script) { - NV_DEBUG(dev, "output script 2 not found\n"); + NV_DEBUG_KMS(dev, "output script 2 not found\n"); return 1; } @@ -3931,7 +3929,7 @@ nouveau_bios_run_display_table(struct drm_device *dev, struct dcb_entry *dcbent, if (script) script = clkcmptable(bios, script, -pxclk); if (!script) { - NV_DEBUG(dev, "clock script 1 not found\n"); + NV_DEBUG_KMS(dev, "clock script 1 not found\n"); return 1; } @@ -4606,10 +4604,6 @@ parse_bit_M_tbl_entry(struct drm_device *dev, struct nvbios *bios, * stuff that we don't use - their use currently unknown */ - uint16_t rr_strap_xlat; - uint8_t rr_group_count; - int i; - /* * Older bios versions don't have a sufficiently long table for * what we want @@ -4618,24 +4612,13 @@ parse_bit_M_tbl_entry(struct drm_device *dev, struct nvbios *bios, return 0; if (bitentry->id[1] < 2) { - rr_group_count = bios->data[bitentry->offset + 2]; - rr_strap_xlat = ROM16(bios->data[bitentry->offset + 3]); + bios->ram_restrict_group_count = bios->data[bitentry->offset + 2]; + bios->ram_restrict_tbl_ptr = ROM16(bios->data[bitentry->offset + 3]); } else { - rr_group_count = bios->data[bitentry->offset + 0]; - rr_strap_xlat = ROM16(bios->data[bitentry->offset + 1]); + bios->ram_restrict_group_count = bios->data[bitentry->offset + 0]; + bios->ram_restrict_tbl_ptr = ROM16(bios->data[bitentry->offset + 1]); } - /* adjust length of INIT_87 */ - for (i = 0; itbl_entry[i].name && (itbl_entry[i].id != 0x87); i++); - itbl_entry[i].length += rr_group_count * 4; - - /* set up multiplier for INIT_RAM_RESTRICT_ZM_REG_GROUP */ - for (; itbl_entry[i].name && (itbl_entry[i].id != 0x8f); i++); - itbl_entry[i].length_multiplier = rr_group_count * 4; - - init_ram_restrict_zm_reg_group_blocklen = itbl_entry[i].length_multiplier; - bios->ram_restrict_tbl_ptr = rr_strap_xlat; - return 0; } @@ -5234,7 +5217,7 @@ parse_dcb_connector_table(struct nvbios *bios) int i; if (!bios->bdcb.connector_table_ptr) { - NV_DEBUG(dev, "No DCB connector table present\n"); + NV_DEBUG_KMS(dev, "No DCB connector table present\n"); return; } diff --git a/drivers/gpu/drm/nouveau/nouveau_bios.h b/drivers/gpu/drm/nouveau/nouveau_bios.h index 1d5f10bd78ed..058e98c76d89 100644 --- a/drivers/gpu/drm/nouveau/nouveau_bios.h +++ b/drivers/gpu/drm/nouveau/nouveau_bios.h @@ -227,6 +227,7 @@ struct nvbios { uint16_t pll_limit_tbl_ptr; uint16_t ram_restrict_tbl_ptr; + uint8_t ram_restrict_group_count; uint16_t some_script_ptr; /* BIT I + 14 */ uint16_t init96_tbl_ptr; /* BIT I + 16 */ diff --git a/drivers/gpu/drm/nouveau/nouveau_bo.c b/drivers/gpu/drm/nouveau/nouveau_bo.c index aa2dfbc3e351..0cad6d834eb2 100644 --- a/drivers/gpu/drm/nouveau/nouveau_bo.c +++ b/drivers/gpu/drm/nouveau/nouveau_bo.c @@ -154,6 +154,11 @@ nouveau_bo_placement_set(struct nouveau_bo *nvbo, uint32_t memtype) nvbo->placement.busy_placement = nvbo->placements; nvbo->placement.num_placement = n; nvbo->placement.num_busy_placement = n; + + if (nvbo->pin_refcnt) { + while (n--) + nvbo->placements[n] |= TTM_PL_FLAG_NO_EVICT; + } } int @@ -400,10 +405,16 @@ nouveau_bo_evict_flags(struct ttm_buffer_object *bo, struct ttm_placement *pl) struct nouveau_bo *nvbo = nouveau_bo(bo); switch (bo->mem.mem_type) { + case TTM_PL_VRAM: + nouveau_bo_placement_set(nvbo, TTM_PL_FLAG_TT | + TTM_PL_FLAG_SYSTEM); + break; default: nouveau_bo_placement_set(nvbo, TTM_PL_FLAG_SYSTEM); break; } + + *pl = nvbo->placement; } @@ -455,11 +466,8 @@ nouveau_bo_move_m2mf(struct ttm_buffer_object *bo, int evict, int no_wait, int ret; chan = nvbo->channel; - if (!chan || nvbo->tile_flags || nvbo->no_vm) { + if (!chan || nvbo->tile_flags || nvbo->no_vm) chan = dev_priv->channel; - if (!chan) - return -EINVAL; - } src_offset = old_mem->mm_node->start << PAGE_SHIFT; dst_offset = new_mem->mm_node->start << PAGE_SHIFT; @@ -625,7 +633,8 @@ nouveau_bo_move(struct ttm_buffer_object *bo, bool evict, bool intr, return ret; } - if (dev_priv->init_state != NOUVEAU_CARD_INIT_DONE) + if (dev_priv->init_state != NOUVEAU_CARD_INIT_DONE || + !dev_priv->channel) return ttm_bo_move_memcpy(bo, evict, no_wait, new_mem); if (old_mem->mem_type == TTM_PL_SYSTEM && !bo->ttm) { diff --git a/drivers/gpu/drm/nouveau/nouveau_connector.c b/drivers/gpu/drm/nouveau/nouveau_connector.c index 032cf098fa1c..5a10deb8bdbd 100644 --- a/drivers/gpu/drm/nouveau/nouveau_connector.c +++ b/drivers/gpu/drm/nouveau/nouveau_connector.c @@ -86,7 +86,7 @@ nouveau_connector_destroy(struct drm_connector *drm_connector) struct nouveau_connector *connector = nouveau_connector(drm_connector); struct drm_device *dev = connector->base.dev; - NV_DEBUG(dev, "\n"); + NV_DEBUG_KMS(dev, "\n"); if (!connector) return; @@ -420,7 +420,7 @@ nouveau_connector_native_mode(struct nouveau_connector *connector) /* Use preferred mode if there is one.. */ list_for_each_entry(mode, &connector->base.probed_modes, head) { if (mode->type & DRM_MODE_TYPE_PREFERRED) { - NV_DEBUG(dev, "native mode from preferred\n"); + NV_DEBUG_KMS(dev, "native mode from preferred\n"); return drm_mode_duplicate(dev, mode); } } @@ -445,7 +445,7 @@ nouveau_connector_native_mode(struct nouveau_connector *connector) largest = mode; } - NV_DEBUG(dev, "native mode from largest: %dx%d@%d\n", + NV_DEBUG_KMS(dev, "native mode from largest: %dx%d@%d\n", high_w, high_h, high_v); return largest ? drm_mode_duplicate(dev, largest) : NULL; } @@ -725,7 +725,7 @@ nouveau_connector_create(struct drm_device *dev, int index, int type) struct drm_encoder *encoder; int ret; - NV_DEBUG(dev, "\n"); + NV_DEBUG_KMS(dev, "\n"); nv_connector = kzalloc(sizeof(*nv_connector), GFP_KERNEL); if (!nv_connector) diff --git a/drivers/gpu/drm/nouveau/nouveau_dp.c b/drivers/gpu/drm/nouveau/nouveau_dp.c index de61f4640e12..9e2926c48579 100644 --- a/drivers/gpu/drm/nouveau/nouveau_dp.c +++ b/drivers/gpu/drm/nouveau/nouveau_dp.c @@ -187,7 +187,7 @@ nouveau_dp_link_train_adjust(struct drm_encoder *encoder, uint8_t *config) if (ret) return false; - NV_DEBUG(dev, "\t\tadjust 0x%02x 0x%02x\n", request[0], request[1]); + NV_DEBUG_KMS(dev, "\t\tadjust 0x%02x 0x%02x\n", request[0], request[1]); /* Keep all lanes at the same level.. */ for (i = 0; i < nv_encoder->dp.link_nr; i++) { @@ -228,7 +228,7 @@ nouveau_dp_link_train_commit(struct drm_encoder *encoder, uint8_t *config) int or = nv_encoder->or, link = !(nv_encoder->dcb->sorconf.link & 1); int dpe_headerlen, ret, i; - NV_DEBUG(dev, "\t\tconfig 0x%02x 0x%02x 0x%02x 0x%02x\n", + NV_DEBUG_KMS(dev, "\t\tconfig 0x%02x 0x%02x 0x%02x 0x%02x\n", config[0], config[1], config[2], config[3]); dpe = nouveau_bios_dp_table(dev, nv_encoder->dcb, &dpe_headerlen); @@ -276,12 +276,12 @@ nouveau_dp_link_train(struct drm_encoder *encoder) bool cr_done, cr_max_vs, eq_done; int ret = 0, i, tries, voltage; - NV_DEBUG(dev, "link training!!\n"); + NV_DEBUG_KMS(dev, "link training!!\n"); train: cr_done = eq_done = false; /* set link configuration */ - NV_DEBUG(dev, "\tbegin train: bw %d, lanes %d\n", + NV_DEBUG_KMS(dev, "\tbegin train: bw %d, lanes %d\n", nv_encoder->dp.link_bw, nv_encoder->dp.link_nr); ret = nouveau_dp_link_bw_set(encoder, nv_encoder->dp.link_bw); @@ -297,7 +297,7 @@ train: return false; /* clock recovery */ - NV_DEBUG(dev, "\tbegin cr\n"); + NV_DEBUG_KMS(dev, "\tbegin cr\n"); ret = nouveau_dp_link_train_set(encoder, DP_TRAINING_PATTERN_1); if (ret) goto stop; @@ -314,7 +314,7 @@ train: ret = auxch_rd(encoder, DP_LANE0_1_STATUS, status, 2); if (ret) break; - NV_DEBUG(dev, "\t\tstatus: 0x%02x 0x%02x\n", + NV_DEBUG_KMS(dev, "\t\tstatus: 0x%02x 0x%02x\n", status[0], status[1]); cr_done = true; @@ -346,7 +346,7 @@ train: goto stop; /* channel equalisation */ - NV_DEBUG(dev, "\tbegin eq\n"); + NV_DEBUG_KMS(dev, "\tbegin eq\n"); ret = nouveau_dp_link_train_set(encoder, DP_TRAINING_PATTERN_2); if (ret) goto stop; @@ -357,7 +357,7 @@ train: ret = auxch_rd(encoder, DP_LANE0_1_STATUS, status, 3); if (ret) break; - NV_DEBUG(dev, "\t\tstatus: 0x%02x 0x%02x\n", + NV_DEBUG_KMS(dev, "\t\tstatus: 0x%02x 0x%02x\n", status[0], status[1]); eq_done = true; @@ -395,9 +395,9 @@ stop: /* retry at a lower setting, if possible */ if (!ret && !(eq_done && cr_done)) { - NV_DEBUG(dev, "\twe failed\n"); + NV_DEBUG_KMS(dev, "\twe failed\n"); if (nv_encoder->dp.link_bw != DP_LINK_BW_1_62) { - NV_DEBUG(dev, "retry link training at low rate\n"); + NV_DEBUG_KMS(dev, "retry link training at low rate\n"); nv_encoder->dp.link_bw = DP_LINK_BW_1_62; goto train; } @@ -418,7 +418,7 @@ nouveau_dp_detect(struct drm_encoder *encoder) if (ret) return false; - NV_DEBUG(dev, "encoder: link_bw %d, link_nr %d\n" + NV_DEBUG_KMS(dev, "encoder: link_bw %d, link_nr %d\n" "display: link_bw %d, link_nr %d version 0x%02x\n", nv_encoder->dcb->dpconf.link_bw, nv_encoder->dcb->dpconf.link_nr, @@ -446,7 +446,7 @@ nouveau_dp_auxch(struct nouveau_i2c_chan *auxch, int cmd, int addr, uint32_t tmp, ctrl, stat = 0, data32[4] = {}; int ret = 0, i, index = auxch->rd; - NV_DEBUG(dev, "ch %d cmd %d addr 0x%x len %d\n", index, cmd, addr, data_nr); + NV_DEBUG_KMS(dev, "ch %d cmd %d addr 0x%x len %d\n", index, cmd, addr, data_nr); tmp = nv_rd32(dev, NV50_AUXCH_CTRL(auxch->rd)); nv_wr32(dev, NV50_AUXCH_CTRL(auxch->rd), tmp | 0x00100000); @@ -472,7 +472,7 @@ nouveau_dp_auxch(struct nouveau_i2c_chan *auxch, int cmd, int addr, if (!(cmd & 1)) { memcpy(data32, data, data_nr); for (i = 0; i < 4; i++) { - NV_DEBUG(dev, "wr %d: 0x%08x\n", i, data32[i]); + NV_DEBUG_KMS(dev, "wr %d: 0x%08x\n", i, data32[i]); nv_wr32(dev, NV50_AUXCH_DATA_OUT(index, i), data32[i]); } } @@ -504,7 +504,7 @@ nouveau_dp_auxch(struct nouveau_i2c_chan *auxch, int cmd, int addr, if (cmd & 1) { for (i = 0; i < 4; i++) { data32[i] = nv_rd32(dev, NV50_AUXCH_DATA_IN(index, i)); - NV_DEBUG(dev, "rd %d: 0x%08x\n", i, data32[i]); + NV_DEBUG_KMS(dev, "rd %d: 0x%08x\n", i, data32[i]); } memcpy(data, data32, data_nr); } diff --git a/drivers/gpu/drm/nouveau/nouveau_drv.c b/drivers/gpu/drm/nouveau/nouveau_drv.c index 35249c35118f..06eb993e0883 100644 --- a/drivers/gpu/drm/nouveau/nouveau_drv.c +++ b/drivers/gpu/drm/nouveau/nouveau_drv.c @@ -35,6 +35,10 @@ #include "drm_pciids.h" +MODULE_PARM_DESC(ctxfw, "Use external firmware blob for grctx init (NV40)"); +int nouveau_ctxfw = 0; +module_param_named(ctxfw, nouveau_ctxfw, int, 0400); + MODULE_PARM_DESC(noagp, "Disable AGP"); int nouveau_noagp; module_param_named(noagp, nouveau_noagp, int, 0400); @@ -273,7 +277,7 @@ nouveau_pci_resume(struct pci_dev *pdev) for (i = 0; i < dev_priv->engine.fifo.channels; i++) { chan = dev_priv->fifos[i]; - if (!chan) + if (!chan || !chan->pushbuf_bo) continue; for (j = 0; j < NOUVEAU_DMA_SKIPS; j++) @@ -341,7 +345,7 @@ static struct drm_driver driver = { .owner = THIS_MODULE, .open = drm_open, .release = drm_release, - .ioctl = drm_ioctl, + .unlocked_ioctl = drm_ioctl, .mmap = nouveau_ttm_mmap, .poll = drm_poll, .fasync = drm_fasync, diff --git a/drivers/gpu/drm/nouveau/nouveau_drv.h b/drivers/gpu/drm/nouveau/nouveau_drv.h index 88b4c7b77e7f..5f8cbb79c499 100644 --- a/drivers/gpu/drm/nouveau/nouveau_drv.h +++ b/drivers/gpu/drm/nouveau/nouveau_drv.h @@ -54,6 +54,7 @@ struct nouveau_fpriv { #include "nouveau_drm.h" #include "nouveau_reg.h" #include "nouveau_bios.h" +struct nouveau_grctx; #define MAX_NUM_DCB_ENTRIES 16 @@ -317,6 +318,7 @@ struct nouveau_pgraph_engine { bool accel_blocked; void *ctxprog; void *ctxvals; + int grctx_size; int (*init)(struct drm_device *); void (*takedown)(struct drm_device *); @@ -647,6 +649,7 @@ extern int nouveau_fbpercrtc; extern char *nouveau_tv_norm; extern int nouveau_reg_debug; extern char *nouveau_vbios; +extern int nouveau_ctxfw; /* nouveau_state.c */ extern void nouveau_preclose(struct drm_device *dev, struct drm_file *); @@ -959,9 +962,7 @@ extern int nv40_graph_create_context(struct nouveau_channel *); extern void nv40_graph_destroy_context(struct nouveau_channel *); extern int nv40_graph_load_context(struct nouveau_channel *); extern int nv40_graph_unload_context(struct drm_device *); -extern int nv40_grctx_init(struct drm_device *); -extern void nv40_grctx_fini(struct drm_device *); -extern void nv40_grctx_vals_load(struct drm_device *, struct nouveau_gpuobj *); +extern void nv40_grctx_init(struct nouveau_grctx *); /* nv50_graph.c */ extern struct nouveau_pgraph_object_class nv50_graph_grclass[]; @@ -975,6 +976,12 @@ extern int nv50_graph_load_context(struct nouveau_channel *); extern int nv50_graph_unload_context(struct drm_device *); extern void nv50_graph_context_switch(struct drm_device *); +/* nouveau_grctx.c */ +extern int nouveau_grctx_prog_load(struct drm_device *); +extern void nouveau_grctx_vals_load(struct drm_device *, + struct nouveau_gpuobj *); +extern void nouveau_grctx_fini(struct drm_device *); + /* nv04_instmem.c */ extern int nv04_instmem_init(struct drm_device *); extern void nv04_instmem_takedown(struct drm_device *); @@ -1207,14 +1214,24 @@ static inline void nv_wo32(struct drm_device *dev, struct nouveau_gpuobj *obj, pci_name(d->pdev), ##arg) #ifndef NV_DEBUG_NOTRACE #define NV_DEBUG(d, fmt, arg...) do { \ - if (drm_debug) { \ + if (drm_debug & DRM_UT_DRIVER) { \ + NV_PRINTK(KERN_DEBUG, d, "%s:%d - " fmt, __func__, \ + __LINE__, ##arg); \ + } \ +} while (0) +#define NV_DEBUG_KMS(d, fmt, arg...) do { \ + if (drm_debug & DRM_UT_KMS) { \ NV_PRINTK(KERN_DEBUG, d, "%s:%d - " fmt, __func__, \ __LINE__, ##arg); \ } \ } while (0) #else #define NV_DEBUG(d, fmt, arg...) do { \ - if (drm_debug) \ + if (drm_debug & DRM_UT_DRIVER) \ + NV_PRINTK(KERN_DEBUG, d, fmt, ##arg); \ +} while (0) +#define NV_DEBUG_KMS(d, fmt, arg...) do { \ + if (drm_debug & DRM_UT_KMS) \ NV_PRINTK(KERN_DEBUG, d, fmt, ##arg); \ } while (0) #endif diff --git a/drivers/gpu/drm/nouveau/nouveau_fbcon.c b/drivers/gpu/drm/nouveau/nouveau_fbcon.c index 36e8c5e4503a..84af25c238b6 100644 --- a/drivers/gpu/drm/nouveau/nouveau_fbcon.c +++ b/drivers/gpu/drm/nouveau/nouveau_fbcon.c @@ -58,7 +58,7 @@ nouveau_fbcon_sync(struct fb_info *info) struct nouveau_channel *chan = dev_priv->channel; int ret, i; - if (!chan->accel_done || + if (!chan || !chan->accel_done || info->state != FBINFO_STATE_RUNNING || info->flags & FBINFO_HWACCEL_DISABLED) return 0; @@ -318,14 +318,16 @@ nouveau_fbcon_create(struct drm_device *dev, uint32_t fb_width, par->nouveau_fb = nouveau_fb; par->dev = dev; - switch (dev_priv->card_type) { - case NV_50: - nv50_fbcon_accel_init(info); - break; - default: - nv04_fbcon_accel_init(info); - break; - }; + if (dev_priv->channel) { + switch (dev_priv->card_type) { + case NV_50: + nv50_fbcon_accel_init(info); + break; + default: + nv04_fbcon_accel_init(info); + break; + }; + } nouveau_fbcon_zfill(dev); @@ -347,7 +349,7 @@ out: int nouveau_fbcon_probe(struct drm_device *dev) { - NV_DEBUG(dev, "\n"); + NV_DEBUG_KMS(dev, "\n"); return drm_fb_helper_single_fb_probe(dev, 32, nouveau_fbcon_create); } diff --git a/drivers/gpu/drm/nouveau/nouveau_grctx.c b/drivers/gpu/drm/nouveau/nouveau_grctx.c new file mode 100644 index 000000000000..419f4c2b3b89 --- /dev/null +++ b/drivers/gpu/drm/nouveau/nouveau_grctx.c @@ -0,0 +1,161 @@ +/* + * Copyright 2009 Red Hat Inc. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + * + * Authors: Ben Skeggs + */ + +#include <linux/firmware.h> + +#include "drmP.h" +#include "nouveau_drv.h" + +struct nouveau_ctxprog { + uint32_t signature; + uint8_t version; + uint16_t length; + uint32_t data[]; +} __attribute__ ((packed)); + +struct nouveau_ctxvals { + uint32_t signature; + uint8_t version; + uint32_t length; + struct { + uint32_t offset; + uint32_t value; + } data[]; +} __attribute__ ((packed)); + +int +nouveau_grctx_prog_load(struct drm_device *dev) +{ + struct drm_nouveau_private *dev_priv = dev->dev_private; + struct nouveau_pgraph_engine *pgraph = &dev_priv->engine.graph; + const int chipset = dev_priv->chipset; + const struct firmware *fw; + const struct nouveau_ctxprog *cp; + const struct nouveau_ctxvals *cv; + char name[32]; + int ret, i; + + if (pgraph->accel_blocked) + return -ENODEV; + + if (!pgraph->ctxprog) { + sprintf(name, "nouveau/nv%02x.ctxprog", chipset); + ret = request_firmware(&fw, name, &dev->pdev->dev); + if (ret) { + NV_ERROR(dev, "No ctxprog for NV%02x\n", chipset); + return ret; + } + + pgraph->ctxprog = kmalloc(fw->size, GFP_KERNEL); + if (!pgraph->ctxprog) { + NV_ERROR(dev, "OOM copying ctxprog\n"); + release_firmware(fw); + return -ENOMEM; + } + memcpy(pgraph->ctxprog, fw->data, fw->size); + + cp = pgraph->ctxprog; + if (le32_to_cpu(cp->signature) != 0x5043564e || + cp->version != 0 || + le16_to_cpu(cp->length) != ((fw->size - 7) / 4)) { + NV_ERROR(dev, "ctxprog invalid\n"); + release_firmware(fw); + nouveau_grctx_fini(dev); + return -EINVAL; + } + release_firmware(fw); + } + + if (!pgraph->ctxvals) { + sprintf(name, "nouveau/nv%02x.ctxvals", chipset); + ret = request_firmware(&fw, name, &dev->pdev->dev); + if (ret) { + NV_ERROR(dev, "No ctxvals for NV%02x\n", chipset); + nouveau_grctx_fini(dev); + return ret; + } + + pgraph->ctxvals = kmalloc(fw->size, GFP_KERNEL); + if (!pgraph->ctxprog) { + NV_ERROR(dev, "OOM copying ctxprog\n"); + release_firmware(fw); + nouveau_grctx_fini(dev); + return -ENOMEM; + } + memcpy(pgraph->ctxvals, fw->data, fw->size); + + cv = (void *)pgraph->ctxvals; + if (le32_to_cpu(cv->signature) != 0x5643564e || + cv->version != 0 || + le32_to_cpu(cv->length) != ((fw->size - 9) / 8)) { + NV_ERROR(dev, "ctxvals invalid\n"); + release_firmware(fw); + nouveau_grctx_fini(dev); + return -EINVAL; + } + release_firmware(fw); + } + + cp = pgraph->ctxprog; + + nv_wr32(dev, NV40_PGRAPH_CTXCTL_UCODE_INDEX, 0); + for (i = 0; i < le16_to_cpu(cp->length); i++) + nv_wr32(dev, NV40_PGRAPH_CTXCTL_UCODE_DATA, + le32_to_cpu(cp->data[i])); + + return 0; +} + +void +nouveau_grctx_fini(struct drm_device *dev) +{ + struct drm_nouveau_private *dev_priv = dev->dev_private; + struct nouveau_pgraph_engine *pgraph = &dev_priv->engine.graph; + + if (pgraph->ctxprog) { + kfree(pgraph->ctxprog); + pgraph->ctxprog = NULL; + } + + if (pgraph->ctxvals) { + kfree(pgraph->ctxprog); + pgraph->ctxvals = NULL; + } +} + +void +nouveau_grctx_vals_load(struct drm_device *dev, struct nouveau_gpuobj *ctx) +{ + struct drm_nouveau_private *dev_priv = dev->dev_private; + struct nouveau_pgraph_engine *pgraph = &dev_priv->engine.graph; + struct nouveau_ctxvals *cv = pgraph->ctxvals; + int i; + + if (!cv) + return; + + for (i = 0; i < le32_to_cpu(cv->length); i++) + nv_wo32(dev, ctx, le32_to_cpu(cv->data[i].offset), + le32_to_cpu(cv->data[i].value)); +} diff --git a/drivers/gpu/drm/nouveau/nouveau_grctx.h b/drivers/gpu/drm/nouveau/nouveau_grctx.h new file mode 100644 index 000000000000..5d39c4ce8006 --- /dev/null +++ b/drivers/gpu/drm/nouveau/nouveau_grctx.h @@ -0,0 +1,133 @@ +#ifndef __NOUVEAU_GRCTX_H__ +#define __NOUVEAU_GRCTX_H__ + +struct nouveau_grctx { + struct drm_device *dev; + + enum { + NOUVEAU_GRCTX_PROG, + NOUVEAU_GRCTX_VALS + } mode; + void *data; + + uint32_t ctxprog_max; + uint32_t ctxprog_len; + uint32_t ctxprog_reg; + int ctxprog_label[32]; + uint32_t ctxvals_pos; + uint32_t ctxvals_base; +}; + +#ifdef CP_CTX +static inline void +cp_out(struct nouveau_grctx *ctx, uint32_t inst) +{ + uint32_t *ctxprog = ctx->data; + + if (ctx->mode != NOUVEAU_GRCTX_PROG) + return; + + BUG_ON(ctx->ctxprog_len == ctx->ctxprog_max); + ctxprog[ctx->ctxprog_len++] = inst; +} + +static inline void +cp_lsr(struct nouveau_grctx *ctx, uint32_t val) +{ + cp_out(ctx, CP_LOAD_SR | val); +} + +static inline void +cp_ctx(struct nouveau_grctx *ctx, uint32_t reg, uint32_t length) +{ + ctx->ctxprog_reg = (reg - 0x00400000) >> 2; + + ctx->ctxvals_base = ctx->ctxvals_pos; + ctx->ctxvals_pos = ctx->ctxvals_base + length; + + if (length > (CP_CTX_COUNT >> CP_CTX_COUNT_SHIFT)) { + cp_lsr(ctx, length); + length = 0; + } + + cp_out(ctx, CP_CTX | (length << CP_CTX_COUNT_SHIFT) | ctx->ctxprog_reg); +} + +static inline void +cp_name(struct nouveau_grctx *ctx, int name) +{ + uint32_t *ctxprog = ctx->data; + int i; + + if (ctx->mode != NOUVEAU_GRCTX_PROG) + return; + + ctx->ctxprog_label[name] = ctx->ctxprog_len; + for (i = 0; i < ctx->ctxprog_len; i++) { + if ((ctxprog[i] & 0xfff00000) != 0xff400000) + continue; + if ((ctxprog[i] & CP_BRA_IP) != ((name) << CP_BRA_IP_SHIFT)) + continue; + ctxprog[i] = (ctxprog[i] & 0x00ff00ff) | + (ctx->ctxprog_len << CP_BRA_IP_SHIFT); + } +} + +static inline void +_cp_bra(struct nouveau_grctx *ctx, u32 mod, int flag, int state, int name) +{ + int ip = 0; + + if (mod != 2) { + ip = ctx->ctxprog_label[name] << CP_BRA_IP_SHIFT; + if (ip == 0) + ip = 0xff000000 | (name << CP_BRA_IP_SHIFT); + } + + cp_out(ctx, CP_BRA | (mod << 18) | ip | flag | + (state ? 0 : CP_BRA_IF_CLEAR)); +} +#define cp_bra(c,f,s,n) _cp_bra((c), 0, CP_FLAG_##f, CP_FLAG_##f##_##s, n) +#ifdef CP_BRA_MOD +#define cp_cal(c,f,s,n) _cp_bra((c), 1, CP_FLAG_##f, CP_FLAG_##f##_##s, n) +#define cp_ret(c,f,s) _cp_bra((c), 2, CP_FLAG_##f, CP_FLAG_##f##_##s, 0) +#endif + +static inline void +_cp_wait(struct nouveau_grctx *ctx, int flag, int state) +{ + cp_out(ctx, CP_WAIT | flag | (state ? CP_WAIT_SET : 0)); +} +#define cp_wait(c,f,s) _cp_wait((c), CP_FLAG_##f, CP_FLAG_##f##_##s) + +static inline void +_cp_set(struct nouveau_grctx *ctx, int flag, int state) +{ + cp_out(ctx, CP_SET | flag | (state ? CP_SET_1 : 0)); +} +#define cp_set(c,f,s) _cp_set((c), CP_FLAG_##f, CP_FLAG_##f##_##s) + +static inline void +cp_pos(struct nouveau_grctx *ctx, int offset) +{ + ctx->ctxvals_pos = offset; + ctx->ctxvals_base = ctx->ctxvals_pos; + + cp_lsr(ctx, ctx->ctxvals_pos); + cp_out(ctx, CP_SET_CONTEXT_POINTER); +} + +static inline void +gr_def(struct nouveau_grctx *ctx, uint32_t reg, uint32_t val) +{ + if (ctx->mode != NOUVEAU_GRCTX_VALS) + return; + + reg = (reg - 0x00400000) / 4; + reg = (reg - ctx->ctxprog_reg) + ctx->ctxvals_base; + + nv_wo32(ctx->dev, ctx->data, reg, val); +} +#endif + +#endif diff --git a/drivers/gpu/drm/nouveau/nouveau_ioc32.c b/drivers/gpu/drm/nouveau/nouveau_ioc32.c index a2c30f4611ba..475ba810bba3 100644 --- a/drivers/gpu/drm/nouveau/nouveau_ioc32.c +++ b/drivers/gpu/drm/nouveau/nouveau_ioc32.c @@ -61,12 +61,10 @@ long nouveau_compat_ioctl(struct file *filp, unsigned int cmd, if (nr < DRM_COMMAND_BASE + DRM_ARRAY_SIZE(mga_compat_ioctls)) fn = nouveau_compat_ioctls[nr - DRM_COMMAND_BASE]; #endif - lock_kernel(); /* XXX for now */ if (fn != NULL) ret = (*fn)(filp, cmd, arg); else - ret = drm_ioctl(filp->f_dentry->d_inode, filp, cmd, arg); - unlock_kernel(); + ret = drm_ioctl(filp, cmd, arg); return ret; } diff --git a/drivers/gpu/drm/nouveau/nouveau_state.c b/drivers/gpu/drm/nouveau/nouveau_state.c index 2ed41d339f6a..e76ec2d207a9 100644 --- a/drivers/gpu/drm/nouveau/nouveau_state.c +++ b/drivers/gpu/drm/nouveau/nouveau_state.c @@ -299,12 +299,57 @@ nouveau_vga_set_decode(void *priv, bool state) return VGA_RSRC_NORMAL_IO | VGA_RSRC_NORMAL_MEM; } +static int +nouveau_card_init_channel(struct drm_device *dev) +{ + struct drm_nouveau_private *dev_priv = dev->dev_private; + struct nouveau_gpuobj *gpuobj; + int ret; + + ret = nouveau_channel_alloc(dev, &dev_priv->channel, + (struct drm_file *)-2, + NvDmaFB, NvDmaTT); + if (ret) + return ret; + + gpuobj = NULL; + ret = nouveau_gpuobj_dma_new(dev_priv->channel, NV_CLASS_DMA_IN_MEMORY, + 0, nouveau_mem_fb_amount(dev), + NV_DMA_ACCESS_RW, NV_DMA_TARGET_VIDMEM, + &gpuobj); + if (ret) + goto out_err; + + ret = nouveau_gpuobj_ref_add(dev, dev_priv->channel, NvDmaVRAM, + gpuobj, NULL); + if (ret) + goto out_err; + + gpuobj = NULL; + ret = nouveau_gpuobj_gart_dma_new(dev_priv->channel, 0, + dev_priv->gart_info.aper_size, + NV_DMA_ACCESS_RW, &gpuobj, NULL); + if (ret) + goto out_err; + + ret = nouveau_gpuobj_ref_add(dev, dev_priv->channel, NvDmaGART, + gpuobj, NULL); + if (ret) + goto out_err; + + return 0; +out_err: + nouveau_gpuobj_del(dev, &gpuobj); + nouveau_channel_free(dev_priv->channel); + dev_priv->channel = NULL; + return ret; +} + int nouveau_card_init(struct drm_device *dev) { struct drm_nouveau_private *dev_priv = dev->dev_private; struct nouveau_engine *engine; - struct nouveau_gpuobj *gpuobj; int ret; NV_DEBUG(dev, "prev state = %d\n", dev_priv->init_state); @@ -317,7 +362,7 @@ nouveau_card_init(struct drm_device *dev) /* Initialise internal driver API hooks */ ret = nouveau_init_engine_ptrs(dev); if (ret) - return ret; + goto out; engine = &dev_priv->engine; dev_priv->init_state = NOUVEAU_CARD_INIT_FAILED; @@ -325,12 +370,12 @@ nouveau_card_init(struct drm_device *dev) if (drm_core_check_feature(dev, DRIVER_MODESET)) { ret = nouveau_bios_init(dev); if (ret) - return ret; + goto out; } ret = nouveau_gpuobj_early_init(dev); if (ret) - return ret; + goto out_bios; /* Initialise instance memory, must happen before mem_init so we * know exactly how much VRAM we're able to use for "normal" @@ -338,100 +383,68 @@ nouveau_card_init(struct drm_device *dev) */ ret = engine->instmem.init(dev); if (ret) - return ret; + goto out_gpuobj_early; /* Setup the memory manager */ ret = nouveau_mem_init(dev); if (ret) - return ret; + goto out_instmem; ret = nouveau_gpuobj_init(dev); if (ret) - return ret; + goto out_mem; /* PMC */ ret = engine->mc.init(dev); if (ret) - return ret; + goto out_gpuobj; /* PTIMER */ ret = engine->timer.init(dev); if (ret) - return ret; + goto out_mc; /* PFB */ ret = engine->fb.init(dev); if (ret) - return ret; + goto out_timer; /* PGRAPH */ ret = engine->graph.init(dev); if (ret) - return ret; + goto out_fb; /* PFIFO */ ret = engine->fifo.init(dev); if (ret) - return ret; + goto out_graph; /* this call irq_preinstall, register irq handler and * call irq_postinstall */ ret = drm_irq_install(dev); if (ret) - return ret; + goto out_fifo; ret = drm_vblank_init(dev, 0); if (ret) - return ret; + goto out_irq; /* what about PVIDEO/PCRTC/PRAMDAC etc? */ - ret = nouveau_channel_alloc(dev, &dev_priv->channel, - (struct drm_file *)-2, - NvDmaFB, NvDmaTT); - if (ret) - return ret; - - gpuobj = NULL; - ret = nouveau_gpuobj_dma_new(dev_priv->channel, NV_CLASS_DMA_IN_MEMORY, - 0, nouveau_mem_fb_amount(dev), - NV_DMA_ACCESS_RW, NV_DMA_TARGET_VIDMEM, - &gpuobj); - if (ret) - return ret; - - ret = nouveau_gpuobj_ref_add(dev, dev_priv->channel, NvDmaVRAM, - gpuobj, NULL); - if (ret) { - nouveau_gpuobj_del(dev, &gpuobj); - return ret; - } - - gpuobj = NULL; - ret = nouveau_gpuobj_gart_dma_new(dev_priv->channel, 0, - dev_priv->gart_info.aper_size, - NV_DMA_ACCESS_RW, &gpuobj, NULL); - if (ret) - return ret; - - ret = nouveau_gpuobj_ref_add(dev, dev_priv->channel, NvDmaGART, - gpuobj, NULL); - if (ret) { - nouveau_gpuobj_del(dev, &gpuobj); - return ret; + if (!engine->graph.accel_blocked) { + ret = nouveau_card_init_channel(dev); + if (ret) + goto out_irq; } if (drm_core_check_feature(dev, DRIVER_MODESET)) { - if (dev_priv->card_type >= NV_50) { + if (dev_priv->card_type >= NV_50) ret = nv50_display_create(dev); - if (ret) - return ret; - } else { + else ret = nv04_display_create(dev); - if (ret) - return ret; - } + if (ret) + goto out_irq; } ret = nouveau_backlight_init(dev); @@ -444,6 +457,32 @@ nouveau_card_init(struct drm_device *dev) drm_helper_initial_config(dev); return 0; + +out_irq: + drm_irq_uninstall(dev); +out_fifo: + engine->fifo.takedown(dev); +out_graph: + engine->graph.takedown(dev); +out_fb: + engine->fb.takedown(dev); +out_timer: + engine->timer.takedown(dev); +out_mc: + engine->mc.takedown(dev); +out_gpuobj: + nouveau_gpuobj_takedown(dev); +out_mem: + nouveau_mem_close(dev); +out_instmem: + engine->instmem.takedown(dev); +out_gpuobj_early: + nouveau_gpuobj_late_takedown(dev); +out_bios: + nouveau_bios_takedown(dev); +out: + vga_client_register(dev->pdev, NULL, NULL, NULL); + return ret; } static void nouveau_card_takedown(struct drm_device *dev) diff --git a/drivers/gpu/drm/nouveau/nv04_crtc.c b/drivers/gpu/drm/nouveau/nv04_crtc.c index b91363606055..d2f143ed97c1 100644 --- a/drivers/gpu/drm/nouveau/nv04_crtc.c +++ b/drivers/gpu/drm/nouveau/nv04_crtc.c @@ -143,10 +143,10 @@ static void nv_crtc_calc_state_ext(struct drm_crtc *crtc, struct drm_display_mod state->pllsel |= nv_crtc->index ? PLLSEL_VPLL2_MASK : PLLSEL_VPLL1_MASK; if (pv->NM2) - NV_TRACE(dev, "vpll: n1 %d n2 %d m1 %d m2 %d log2p %d\n", + NV_DEBUG_KMS(dev, "vpll: n1 %d n2 %d m1 %d m2 %d log2p %d\n", pv->N1, pv->N2, pv->M1, pv->M2, pv->log2P); else - NV_TRACE(dev, "vpll: n %d m %d log2p %d\n", + NV_DEBUG_KMS(dev, "vpll: n %d m %d log2p %d\n", pv->N1, pv->M1, pv->log2P); nv_crtc->cursor.set_offset(nv_crtc, nv_crtc->cursor.offset); @@ -160,7 +160,7 @@ nv_crtc_dpms(struct drm_crtc *crtc, int mode) unsigned char seq1 = 0, crtc17 = 0; unsigned char crtc1A; - NV_TRACE(dev, "Setting dpms mode %d on CRTC %d\n", mode, + NV_DEBUG_KMS(dev, "Setting dpms mode %d on CRTC %d\n", mode, nv_crtc->index); if (nv_crtc->last_dpms == mode) /* Don't do unnecesary mode changes. */ @@ -603,7 +603,7 @@ nv_crtc_mode_set(struct drm_crtc *crtc, struct drm_display_mode *mode, struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc); struct drm_nouveau_private *dev_priv = dev->dev_private; - NV_DEBUG(dev, "CTRC mode on CRTC %d:\n", nv_crtc->index); + NV_DEBUG_KMS(dev, "CTRC mode on CRTC %d:\n", nv_crtc->index); drm_mode_debug_printmodeline(adjusted_mode); /* unlock must come after turning off FP_TG_CONTROL in output_prepare */ @@ -703,7 +703,7 @@ static void nv_crtc_destroy(struct drm_crtc *crtc) { struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc); - NV_DEBUG(crtc->dev, "\n"); + NV_DEBUG_KMS(crtc->dev, "\n"); if (!nv_crtc) return; diff --git a/drivers/gpu/drm/nouveau/nv04_dac.c b/drivers/gpu/drm/nouveau/nv04_dac.c index a5fa51714e87..d9f32879ba38 100644 --- a/drivers/gpu/drm/nouveau/nv04_dac.c +++ b/drivers/gpu/drm/nouveau/nv04_dac.c @@ -205,7 +205,7 @@ out: NVWriteVgaSeq(dev, 0, NV_VIO_SR_CLOCK_INDEX, saved_seq1); if (blue == 0x18) { - NV_TRACE(dev, "Load detected on head A\n"); + NV_INFO(dev, "Load detected on head A\n"); return connector_status_connected; } @@ -350,14 +350,10 @@ static void nv04_dac_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode) { - struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder); struct drm_device *dev = encoder->dev; struct drm_nouveau_private *dev_priv = dev->dev_private; int head = nouveau_crtc(encoder->crtc)->index; - NV_TRACE(dev, "%s called for encoder %d\n", __func__, - nv_encoder->dcb->index); - if (nv_gf4_disp_arch(dev)) { struct drm_encoder *rebind; uint32_t dac_offset = nv04_dac_output_offset(encoder); @@ -466,7 +462,7 @@ static void nv04_dac_destroy(struct drm_encoder *encoder) { struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder); - NV_DEBUG(encoder->dev, "\n"); + NV_DEBUG_KMS(encoder->dev, "\n"); drm_encoder_cleanup(encoder); kfree(nv_encoder); diff --git a/drivers/gpu/drm/nouveau/nv04_dfp.c b/drivers/gpu/drm/nouveau/nv04_dfp.c index e5b33339d595..483f875bdb6a 100644 --- a/drivers/gpu/drm/nouveau/nv04_dfp.c +++ b/drivers/gpu/drm/nouveau/nv04_dfp.c @@ -261,7 +261,7 @@ static void nv04_dfp_mode_set(struct drm_encoder *encoder, struct drm_display_mode *output_mode = &nv_encoder->mode; uint32_t mode_ratio, panel_ratio; - NV_DEBUG(dev, "Output mode on CRTC %d:\n", nv_crtc->index); + NV_DEBUG_KMS(dev, "Output mode on CRTC %d:\n", nv_crtc->index); drm_mode_debug_printmodeline(output_mode); /* Initialize the FP registers in this CRTC. */ @@ -413,7 +413,9 @@ static void nv04_dfp_commit(struct drm_encoder *encoder) struct dcb_entry *dcbe = nv_encoder->dcb; int head = nouveau_crtc(encoder->crtc)->index; - NV_TRACE(dev, "%s called for encoder %d\n", __func__, nv_encoder->dcb->index); + NV_INFO(dev, "Output %s is running on CRTC %d using output %c\n", + drm_get_connector_name(&nouveau_encoder_connector_get(nv_encoder)->base), + nv_crtc->index, '@' + ffs(nv_encoder->dcb->or)); if (dcbe->type == OUTPUT_TMDS) run_tmds_table(dev, dcbe, head, nv_encoder->mode.clock); @@ -550,7 +552,7 @@ static void nv04_dfp_destroy(struct drm_encoder *encoder) { struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder); - NV_DEBUG(encoder->dev, "\n"); + NV_DEBUG_KMS(encoder->dev, "\n"); drm_encoder_cleanup(encoder); kfree(nv_encoder); diff --git a/drivers/gpu/drm/nouveau/nv04_display.c b/drivers/gpu/drm/nouveau/nv04_display.c index b47c757ff48b..ef77215fa5b9 100644 --- a/drivers/gpu/drm/nouveau/nv04_display.c +++ b/drivers/gpu/drm/nouveau/nv04_display.c @@ -99,10 +99,11 @@ nv04_display_create(struct drm_device *dev) uint16_t connector[16] = { 0 }; int i, ret; - NV_DEBUG(dev, "\n"); + NV_DEBUG_KMS(dev, "\n"); if (nv_two_heads(dev)) nv04_display_store_initial_head_owner(dev); + nouveau_hw_save_vga_fonts(dev, 1); drm_mode_config_init(dev); drm_mode_create_scaling_mode_property(dev); @@ -203,8 +204,6 @@ nv04_display_create(struct drm_device *dev) /* Save previous state */ NVLockVgaCrtcs(dev, false); - nouveau_hw_save_vga_fonts(dev, 1); - list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) crtc->funcs->save(crtc); @@ -223,7 +222,7 @@ nv04_display_destroy(struct drm_device *dev) struct drm_encoder *encoder; struct drm_crtc *crtc; - NV_DEBUG(dev, "\n"); + NV_DEBUG_KMS(dev, "\n"); /* Turn every CRTC off. */ list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { @@ -246,9 +245,9 @@ nv04_display_destroy(struct drm_device *dev) list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) crtc->funcs->restore(crtc); - nouveau_hw_save_vga_fonts(dev, 0); - drm_mode_config_cleanup(dev); + + nouveau_hw_save_vga_fonts(dev, 0); } void diff --git a/drivers/gpu/drm/nouveau/nv04_graph.c b/drivers/gpu/drm/nouveau/nv04_graph.c index 396ee92118f6..d561d773c0f4 100644 --- a/drivers/gpu/drm/nouveau/nv04_graph.c +++ b/drivers/gpu/drm/nouveau/nv04_graph.c @@ -543,7 +543,7 @@ nv04_graph_mthd_set_operation(struct nouveau_channel *chan, int grclass, nv_wi32(dev, instance, tmp); nv_wr32(dev, NV04_PGRAPH_CTX_SWITCH1, tmp); - nv_wr32(dev, NV04_PGRAPH_CTX_CACHE1 + subc, tmp); + nv_wr32(dev, NV04_PGRAPH_CTX_CACHE1 + (subc<<2), tmp); return 0; } diff --git a/drivers/gpu/drm/nouveau/nv10_graph.c b/drivers/gpu/drm/nouveau/nv10_graph.c index 6bf6804bb0ef..6870e0ee2e7e 100644 --- a/drivers/gpu/drm/nouveau/nv10_graph.c +++ b/drivers/gpu/drm/nouveau/nv10_graph.c @@ -389,49 +389,50 @@ struct graph_state { int nv10[ARRAY_SIZE(nv10_graph_ctx_regs)]; int nv17[ARRAY_SIZE(nv17_graph_ctx_regs)]; struct pipe_state pipe_state; + uint32_t lma_window[4]; }; +#define PIPE_SAVE(dev, state, addr) \ + do { \ + int __i; \ + nv_wr32(dev, NV10_PGRAPH_PIPE_ADDRESS, addr); \ + for (__i = 0; __i < ARRAY_SIZE(state); __i++) \ + state[__i] = nv_rd32(dev, NV10_PGRAPH_PIPE_DATA); \ + } while (0) + +#define PIPE_RESTORE(dev, state, addr) \ + do { \ + int __i; \ + nv_wr32(dev, NV10_PGRAPH_PIPE_ADDRESS, addr); \ + for (__i = 0; __i < ARRAY_SIZE(state); __i++) \ + nv_wr32(dev, NV10_PGRAPH_PIPE_DATA, state[__i]); \ + } while (0) + static void nv10_graph_save_pipe(struct nouveau_channel *chan) { struct drm_device *dev = chan->dev; struct graph_state *pgraph_ctx = chan->pgraph_ctx; - struct pipe_state *fifo_pipe_state = &pgraph_ctx->pipe_state; - int i; -#define PIPE_SAVE(addr) \ - do { \ - nv_wr32(dev, NV10_PGRAPH_PIPE_ADDRESS, addr); \ - for (i = 0; i < ARRAY_SIZE(fifo_pipe_state->pipe_##addr); i++) \ - fifo_pipe_state->pipe_##addr[i] = nv_rd32(dev, NV10_PGRAPH_PIPE_DATA); \ - } while (0) - - PIPE_SAVE(0x4400); - PIPE_SAVE(0x0200); - PIPE_SAVE(0x6400); - PIPE_SAVE(0x6800); - PIPE_SAVE(0x6c00); - PIPE_SAVE(0x7000); - PIPE_SAVE(0x7400); - PIPE_SAVE(0x7800); - PIPE_SAVE(0x0040); - PIPE_SAVE(0x0000); - -#undef PIPE_SAVE + struct pipe_state *pipe = &pgraph_ctx->pipe_state; + + PIPE_SAVE(dev, pipe->pipe_0x4400, 0x4400); + PIPE_SAVE(dev, pipe->pipe_0x0200, 0x0200); + PIPE_SAVE(dev, pipe->pipe_0x6400, 0x6400); + PIPE_SAVE(dev, pipe->pipe_0x6800, 0x6800); + PIPE_SAVE(dev, pipe->pipe_0x6c00, 0x6c00); + PIPE_SAVE(dev, pipe->pipe_0x7000, 0x7000); + PIPE_SAVE(dev, pipe->pipe_0x7400, 0x7400); + PIPE_SAVE(dev, pipe->pipe_0x7800, 0x7800); + PIPE_SAVE(dev, pipe->pipe_0x0040, 0x0040); + PIPE_SAVE(dev, pipe->pipe_0x0000, 0x0000); } static void nv10_graph_load_pipe(struct nouveau_channel *chan) { struct drm_device *dev = chan->dev; struct graph_state *pgraph_ctx = chan->pgraph_ctx; - struct pipe_state *fifo_pipe_state = &pgraph_ctx->pipe_state; - int i; + struct pipe_state *pipe = &pgraph_ctx->pipe_state; uint32_t xfmode0, xfmode1; -#define PIPE_RESTORE(addr) \ - do { \ - nv_wr32(dev, NV10_PGRAPH_PIPE_ADDRESS, addr); \ - for (i = 0; i < ARRAY_SIZE(fifo_pipe_state->pipe_##addr); i++) \ - nv_wr32(dev, NV10_PGRAPH_PIPE_DATA, fifo_pipe_state->pipe_##addr[i]); \ - } while (0) - + int i; nouveau_wait_for_idle(dev); /* XXX check haiku comments */ @@ -457,24 +458,22 @@ static void nv10_graph_load_pipe(struct nouveau_channel *chan) nv_wr32(dev, NV10_PGRAPH_PIPE_DATA, 0x00000008); - PIPE_RESTORE(0x0200); + PIPE_RESTORE(dev, pipe->pipe_0x0200, 0x0200); nouveau_wait_for_idle(dev); /* restore XFMODE */ nv_wr32(dev, NV10_PGRAPH_XFMODE0, xfmode0); nv_wr32(dev, NV10_PGRAPH_XFMODE1, xfmode1); - PIPE_RESTORE(0x6400); - PIPE_RESTORE(0x6800); - PIPE_RESTORE(0x6c00); - PIPE_RESTORE(0x7000); - PIPE_RESTORE(0x7400); - PIPE_RESTORE(0x7800); - PIPE_RESTORE(0x4400); - PIPE_RESTORE(0x0000); - PIPE_RESTORE(0x0040); + PIPE_RESTORE(dev, pipe->pipe_0x6400, 0x6400); + PIPE_RESTORE(dev, pipe->pipe_0x6800, 0x6800); + PIPE_RESTORE(dev, pipe->pipe_0x6c00, 0x6c00); + PIPE_RESTORE(dev, pipe->pipe_0x7000, 0x7000); + PIPE_RESTORE(dev, pipe->pipe_0x7400, 0x7400); + PIPE_RESTORE(dev, pipe->pipe_0x7800, 0x7800); + PIPE_RESTORE(dev, pipe->pipe_0x4400, 0x4400); + PIPE_RESTORE(dev, pipe->pipe_0x0000, 0x0000); + PIPE_RESTORE(dev, pipe->pipe_0x0040, 0x0040); nouveau_wait_for_idle(dev); - -#undef PIPE_RESTORE } static void nv10_graph_create_pipe(struct nouveau_channel *chan) @@ -832,6 +831,9 @@ int nv10_graph_init(struct drm_device *dev) (1<<31)); if (dev_priv->chipset >= 0x17) { nv_wr32(dev, NV10_PGRAPH_DEBUG_4, 0x1f000000); + nv_wr32(dev, 0x400a10, 0x3ff3fb6); + nv_wr32(dev, 0x400838, 0x2f8684); + nv_wr32(dev, 0x40083c, 0x115f3f); nv_wr32(dev, 0x004006b0, 0x40000020); } else nv_wr32(dev, NV10_PGRAPH_DEBUG_4, 0x00000000); @@ -867,6 +869,115 @@ void nv10_graph_takedown(struct drm_device *dev) { } +static int +nv17_graph_mthd_lma_window(struct nouveau_channel *chan, int grclass, + int mthd, uint32_t data) +{ + struct drm_device *dev = chan->dev; + struct graph_state *ctx = chan->pgraph_ctx; + struct pipe_state *pipe = &ctx->pipe_state; + struct drm_nouveau_private *dev_priv = dev->dev_private; + struct nouveau_pgraph_engine *pgraph = &dev_priv->engine.graph; + uint32_t pipe_0x0040[1], pipe_0x64c0[8], pipe_0x6a80[3], pipe_0x6ab0[3]; + uint32_t xfmode0, xfmode1; + int i; + + ctx->lma_window[(mthd - 0x1638) / 4] = data; + + if (mthd != 0x1644) + return 0; + + nouveau_wait_for_idle(dev); + + PIPE_SAVE(dev, pipe_0x0040, 0x0040); + PIPE_SAVE(dev, pipe->pipe_0x0200, 0x0200); + + PIPE_RESTORE(dev, ctx->lma_window, 0x6790); + + nouveau_wait_for_idle(dev); + + xfmode0 = nv_rd32(dev, NV10_PGRAPH_XFMODE0); + xfmode1 = nv_rd32(dev, NV10_PGRAPH_XFMODE1); + + PIPE_SAVE(dev, pipe->pipe_0x4400, 0x4400); + PIPE_SAVE(dev, pipe_0x64c0, 0x64c0); + PIPE_SAVE(dev, pipe_0x6ab0, 0x6ab0); + PIPE_SAVE(dev, pipe_0x6a80, 0x6a80); + + nouveau_wait_for_idle(dev); + + nv_wr32(dev, NV10_PGRAPH_XFMODE0, 0x10000000); + nv_wr32(dev, NV10_PGRAPH_XFMODE1, 0x00000000); + nv_wr32(dev, NV10_PGRAPH_PIPE_ADDRESS, 0x000064c0); + for (i = 0; i < 4; i++) + nv_wr32(dev, NV10_PGRAPH_PIPE_DATA, 0x3f800000); + for (i = 0; i < 4; i++) + nv_wr32(dev, NV10_PGRAPH_PIPE_DATA, 0x00000000); + + nv_wr32(dev, NV10_PGRAPH_PIPE_ADDRESS, 0x00006ab0); + for (i = 0; i < 3; i++) + nv_wr32(dev, NV10_PGRAPH_PIPE_DATA, 0x3f800000); + + nv_wr32(dev, NV10_PGRAPH_PIPE_ADDRESS, 0x00006a80); + for (i = 0; i < 3; i++) + nv_wr32(dev, NV10_PGRAPH_PIPE_DATA, 0x00000000); + + nv_wr32(dev, NV10_PGRAPH_PIPE_ADDRESS, 0x00000040); + nv_wr32(dev, NV10_PGRAPH_PIPE_DATA, 0x00000008); + + PIPE_RESTORE(dev, pipe->pipe_0x0200, 0x0200); + + nouveau_wait_for_idle(dev); + + PIPE_RESTORE(dev, pipe_0x0040, 0x0040); + + nv_wr32(dev, NV10_PGRAPH_XFMODE0, xfmode0); + nv_wr32(dev, NV10_PGRAPH_XFMODE1, xfmode1); + + PIPE_RESTORE(dev, pipe_0x64c0, 0x64c0); + PIPE_RESTORE(dev, pipe_0x6ab0, 0x6ab0); + PIPE_RESTORE(dev, pipe_0x6a80, 0x6a80); + PIPE_RESTORE(dev, pipe->pipe_0x4400, 0x4400); + + nv_wr32(dev, NV10_PGRAPH_PIPE_ADDRESS, 0x000000c0); + nv_wr32(dev, NV10_PGRAPH_PIPE_DATA, 0x00000000); + + nouveau_wait_for_idle(dev); + + pgraph->fifo_access(dev, true); + + return 0; +} + +static int +nv17_graph_mthd_lma_enable(struct nouveau_channel *chan, int grclass, + int mthd, uint32_t data) +{ + struct drm_device *dev = chan->dev; + struct drm_nouveau_private *dev_priv = dev->dev_private; + struct nouveau_pgraph_engine *pgraph = &dev_priv->engine.graph; + + nouveau_wait_for_idle(dev); + + nv_wr32(dev, NV10_PGRAPH_DEBUG_4, + nv_rd32(dev, NV10_PGRAPH_DEBUG_4) | 0x1 << 8); + nv_wr32(dev, 0x004006b0, + nv_rd32(dev, 0x004006b0) | 0x8 << 24); + + pgraph->fifo_access(dev, true); + + return 0; +} + +static struct nouveau_pgraph_object_method nv17_graph_celsius_mthds[] = { + { 0x1638, nv17_graph_mthd_lma_window }, + { 0x163c, nv17_graph_mthd_lma_window }, + { 0x1640, nv17_graph_mthd_lma_window }, + { 0x1644, nv17_graph_mthd_lma_window }, + { 0x1658, nv17_graph_mthd_lma_enable }, + {} +}; + struct nouveau_pgraph_object_class nv10_graph_grclass[] = { { 0x0030, false, NULL }, /* null */ { 0x0039, false, NULL }, /* m2mf */ @@ -887,6 +998,6 @@ struct nouveau_pgraph_object_class nv10_graph_grclass[] = { { 0x0095, false, NULL }, /* multitex_tri */ { 0x0056, false, NULL }, /* celcius (nv10) */ { 0x0096, false, NULL }, /* celcius (nv11) */ - { 0x0099, false, NULL }, /* celcius (nv17) */ + { 0x0099, false, nv17_graph_celsius_mthds }, /* celcius (nv17) */ {} }; diff --git a/drivers/gpu/drm/nouveau/nv17_tv.c b/drivers/gpu/drm/nouveau/nv17_tv.c index 46cfd9c60478..81c01353a9f9 100644 --- a/drivers/gpu/drm/nouveau/nv17_tv.c +++ b/drivers/gpu/drm/nouveau/nv17_tv.c @@ -219,7 +219,7 @@ static void nv17_tv_dpms(struct drm_encoder *encoder, int mode) return; nouveau_encoder(encoder)->last_dpms = mode; - NV_TRACE(dev, "Setting dpms mode %d on TV encoder (output %d)\n", + NV_INFO(dev, "Setting dpms mode %d on TV encoder (output %d)\n", mode, nouveau_encoder(encoder)->dcb->index); regs->ptv_200 &= ~1; @@ -619,7 +619,7 @@ static void nv17_tv_destroy(struct drm_encoder *encoder) { struct nv17_tv_encoder *tv_enc = to_tv_enc(encoder); - NV_DEBUG(encoder->dev, "\n"); + NV_DEBUG_KMS(encoder->dev, "\n"); drm_encoder_cleanup(encoder); kfree(tv_enc); diff --git a/drivers/gpu/drm/nouveau/nv40_graph.c b/drivers/gpu/drm/nouveau/nv40_graph.c index 7e8547cb5833..2b332bb55acf 100644 --- a/drivers/gpu/drm/nouveau/nv40_graph.c +++ b/drivers/gpu/drm/nouveau/nv40_graph.c @@ -24,36 +24,10 @@ * */ -#include <linux/firmware.h> - #include "drmP.h" #include "drm.h" #include "nouveau_drv.h" - -MODULE_FIRMWARE("nouveau/nv40.ctxprog"); -MODULE_FIRMWARE("nouveau/nv40.ctxvals"); -MODULE_FIRMWARE("nouveau/nv41.ctxprog"); -MODULE_FIRMWARE("nouveau/nv41.ctxvals"); -MODULE_FIRMWARE("nouveau/nv42.ctxprog"); -MODULE_FIRMWARE("nouveau/nv42.ctxvals"); -MODULE_FIRMWARE("nouveau/nv43.ctxprog"); -MODULE_FIRMWARE("nouveau/nv43.ctxvals"); -MODULE_FIRMWARE("nouveau/nv44.ctxprog"); -MODULE_FIRMWARE("nouveau/nv44.ctxvals"); -MODULE_FIRMWARE("nouveau/nv46.ctxprog"); -MODULE_FIRMWARE("nouveau/nv46.ctxvals"); -MODULE_FIRMWARE("nouveau/nv47.ctxprog"); -MODULE_FIRMWARE("nouveau/nv47.ctxvals"); -MODULE_FIRMWARE("nouveau/nv49.ctxprog"); -MODULE_FIRMWARE("nouveau/nv49.ctxvals"); -MODULE_FIRMWARE("nouveau/nv4a.ctxprog"); -MODULE_FIRMWARE("nouveau/nv4a.ctxvals"); -MODULE_FIRMWARE("nouveau/nv4b.ctxprog"); -MODULE_FIRMWARE("nouveau/nv4b.ctxvals"); -MODULE_FIRMWARE("nouveau/nv4c.ctxprog"); -MODULE_FIRMWARE("nouveau/nv4c.ctxvals"); -MODULE_FIRMWARE("nouveau/nv4e.ctxprog"); -MODULE_FIRMWARE("nouveau/nv4e.ctxvals"); +#include "nouveau_grctx.h" struct nouveau_channel * nv40_graph_channel(struct drm_device *dev) @@ -83,27 +57,30 @@ nv40_graph_create_context(struct nouveau_channel *chan) { struct drm_device *dev = chan->dev; struct drm_nouveau_private *dev_priv = dev->dev_private; - struct nouveau_gpuobj *ctx; + struct nouveau_pgraph_engine *pgraph = &dev_priv->engine.graph; int ret; - /* Allocate a 175KiB block of PRAMIN to store the context. This - * is massive overkill for a lot of chipsets, but it should be safe - * until we're able to implement this properly (will happen at more - * or less the same time we're able to write our own context programs. - */ - ret = nouveau_gpuobj_new_ref(dev, chan, NULL, 0, 175*1024, 16, - NVOBJ_FLAG_ZERO_ALLOC, - &chan->ramin_grctx); + ret = nouveau_gpuobj_new_ref(dev, chan, NULL, 0, pgraph->grctx_size, + 16, NVOBJ_FLAG_ZERO_ALLOC, + &chan->ramin_grctx); if (ret) return ret; - ctx = chan->ramin_grctx->gpuobj; /* Initialise default context values */ dev_priv->engine.instmem.prepare_access(dev, true); - nv40_grctx_vals_load(dev, ctx); - nv_wo32(dev, ctx, 0, ctx->im_pramin->start); - dev_priv->engine.instmem.finish_access(dev); + if (!pgraph->ctxprog) { + struct nouveau_grctx ctx = {}; + ctx.dev = chan->dev; + ctx.mode = NOUVEAU_GRCTX_VALS; + ctx.data = chan->ramin_grctx->gpuobj; + nv40_grctx_init(&ctx); + } else { + nouveau_grctx_vals_load(dev, chan->ramin_grctx->gpuobj); + } + nv_wo32(dev, chan->ramin_grctx->gpuobj, 0, + chan->ramin_grctx->gpuobj->im_pramin->start); + dev_priv->engine.instmem.finish_access(dev); return 0; } @@ -204,139 +181,6 @@ nv40_graph_unload_context(struct drm_device *dev) return ret; } -struct nouveau_ctxprog { - uint32_t signature; - uint8_t version; - uint16_t length; - uint32_t data[]; -} __attribute__ ((packed)); - -struct nouveau_ctxvals { - uint32_t signature; - uint8_t version; - uint32_t length; - struct { - uint32_t offset; - uint32_t value; - } data[]; -} __attribute__ ((packed)); - -int -nv40_grctx_init(struct drm_device *dev) -{ - struct drm_nouveau_private *dev_priv = dev->dev_private; - struct nouveau_pgraph_engine *pgraph = &dev_priv->engine.graph; - const int chipset = dev_priv->chipset; - const struct firmware *fw; - const struct nouveau_ctxprog *cp; - const struct nouveau_ctxvals *cv; - char name[32]; - int ret, i; - - pgraph->accel_blocked = true; - - if (!pgraph->ctxprog) { - sprintf(name, "nouveau/nv%02x.ctxprog", chipset); - ret = request_firmware(&fw, name, &dev->pdev->dev); - if (ret) { - NV_ERROR(dev, "No ctxprog for NV%02x\n", chipset); - return ret; - } - - pgraph->ctxprog = kmalloc(fw->size, GFP_KERNEL); - if (!pgraph->ctxprog) { - NV_ERROR(dev, "OOM copying ctxprog\n"); - release_firmware(fw); - return -ENOMEM; - } - memcpy(pgraph->ctxprog, fw->data, fw->size); - - cp = pgraph->ctxprog; - if (le32_to_cpu(cp->signature) != 0x5043564e || - cp->version != 0 || - le16_to_cpu(cp->length) != ((fw->size - 7) / 4)) { - NV_ERROR(dev, "ctxprog invalid\n"); - release_firmware(fw); - nv40_grctx_fini(dev); - return -EINVAL; - } - release_firmware(fw); - } - - if (!pgraph->ctxvals) { - sprintf(name, "nouveau/nv%02x.ctxvals", chipset); - ret = request_firmware(&fw, name, &dev->pdev->dev); - if (ret) { - NV_ERROR(dev, "No ctxvals for NV%02x\n", chipset); - nv40_grctx_fini(dev); - return ret; - } - - pgraph->ctxvals = kmalloc(fw->size, GFP_KERNEL); - if (!pgraph->ctxprog) { - NV_ERROR(dev, "OOM copying ctxprog\n"); - release_firmware(fw); - nv40_grctx_fini(dev); - return -ENOMEM; - } - memcpy(pgraph->ctxvals, fw->data, fw->size); - - cv = (void *)pgraph->ctxvals; - if (le32_to_cpu(cv->signature) != 0x5643564e || - cv->version != 0 || - le32_to_cpu(cv->length) != ((fw->size - 9) / 8)) { - NV_ERROR(dev, "ctxvals invalid\n"); - release_firmware(fw); - nv40_grctx_fini(dev); - return -EINVAL; - } - release_firmware(fw); - } - - cp = pgraph->ctxprog; - - nv_wr32(dev, NV40_PGRAPH_CTXCTL_UCODE_INDEX, 0); - for (i = 0; i < le16_to_cpu(cp->length); i++) - nv_wr32(dev, NV40_PGRAPH_CTXCTL_UCODE_DATA, - le32_to_cpu(cp->data[i])); - - pgraph->accel_blocked = false; - return 0; -} - -void -nv40_grctx_fini(struct drm_device *dev) -{ - struct drm_nouveau_private *dev_priv = dev->dev_private; - struct nouveau_pgraph_engine *pgraph = &dev_priv->engine.graph; - - if (pgraph->ctxprog) { - kfree(pgraph->ctxprog); - pgraph->ctxprog = NULL; - } - - if (pgraph->ctxvals) { - kfree(pgraph->ctxprog); - pgraph->ctxvals = NULL; - } -} - -void -nv40_grctx_vals_load(struct drm_device *dev, struct nouveau_gpuobj *ctx) -{ - struct drm_nouveau_private *dev_priv = dev->dev_private; - struct nouveau_pgraph_engine *pgraph = &dev_priv->engine.graph; - struct nouveau_ctxvals *cv = pgraph->ctxvals; - int i; - - if (!cv) - return; - - for (i = 0; i < le32_to_cpu(cv->length); i++) - nv_wo32(dev, ctx, le32_to_cpu(cv->data[i].offset), - le32_to_cpu(cv->data[i].value)); -} - /* * G70 0x47 * G71 0x49 @@ -359,7 +203,26 @@ nv40_graph_init(struct drm_device *dev) nv_wr32(dev, NV03_PMC_ENABLE, nv_rd32(dev, NV03_PMC_ENABLE) | NV_PMC_ENABLE_PGRAPH); - nv40_grctx_init(dev); + if (nouveau_ctxfw) { + nouveau_grctx_prog_load(dev); + dev_priv->engine.graph.grctx_size = 175 * 1024; + } + + if (!dev_priv->engine.graph.ctxprog) { + struct nouveau_grctx ctx = {}; + uint32_t cp[256]; + + ctx.dev = dev; + ctx.mode = NOUVEAU_GRCTX_PROG; + ctx.data = cp; + ctx.ctxprog_max = 256; + nv40_grctx_init(&ctx); + dev_priv->engine.graph.grctx_size = ctx.ctxvals_pos * 4; + + nv_wr32(dev, NV40_PGRAPH_CTXCTL_UCODE_INDEX, 0); + for (i = 0; i < ctx.ctxprog_len; i++) + nv_wr32(dev, NV40_PGRAPH_CTXCTL_UCODE_DATA, cp[i]); + } /* No context present currently */ nv_wr32(dev, NV40_PGRAPH_CTXCTL_CUR, 0x00000000); @@ -539,6 +402,7 @@ nv40_graph_init(struct drm_device *dev) void nv40_graph_takedown(struct drm_device *dev) { + nouveau_grctx_fini(dev); } struct nouveau_pgraph_object_class nv40_graph_grclass[] = { diff --git a/drivers/gpu/drm/nouveau/nv40_grctx.c b/drivers/gpu/drm/nouveau/nv40_grctx.c new file mode 100644 index 000000000000..11b11c31f543 --- /dev/null +++ b/drivers/gpu/drm/nouveau/nv40_grctx.c @@ -0,0 +1,678 @@ +/* + * Copyright 2009 Red Hat Inc. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + * + * Authors: Ben Skeggs + */ + +/* NVIDIA context programs handle a number of other conditions which are + * not implemented in our versions. It's not clear why NVIDIA context + * programs have this code, nor whether it's strictly necessary for + * correct operation. We'll implement additional handling if/when we + * discover it's necessary. + * + * - On context save, NVIDIA set 0x400314 bit 0 to 1 if the "3D state" + * flag is set, this gets saved into the context. + * - On context save, the context program for all cards load nsource + * into a flag register and check for ILLEGAL_MTHD. If it's set, + * opcode 0x60000d is called before resuming normal operation. + * - Some context programs check more conditions than the above. NV44 + * checks: ((nsource & 0x0857) || (0x400718 & 0x0100) || (intr & 0x0001)) + * and calls 0x60000d before resuming normal operation. + * - At the very beginning of NVIDIA's context programs, flag 9 is checked + * and if true 0x800001 is called with count=0, pos=0, the flag is cleared + * and then the ctxprog is aborted. It looks like a complicated NOP, + * its purpose is unknown. + * - In the section of code that loads the per-vs state, NVIDIA check + * flag 10. If it's set, they only transfer the small 0x300 byte block + * of state + the state for a single vs as opposed to the state for + * all vs units. It doesn't seem likely that it'll occur in normal + * operation, especially seeing as it appears NVIDIA may have screwed + * up the ctxprogs for some cards and have an invalid instruction + * rather than a cp_lsr(ctx, dwords_for_1_vs_unit) instruction. + * - There's a number of places where context offset 0 (where we place + * the PRAMIN offset of the context) is loaded into either 0x408000, + * 0x408004 or 0x408008. Not sure what's up there either. + * - The ctxprogs for some cards save 0x400a00 again during the cleanup + * path for auto-loadctx. + */ + +#define CP_FLAG_CLEAR 0 +#define CP_FLAG_SET 1 +#define CP_FLAG_SWAP_DIRECTION ((0 * 32) + 0) +#define CP_FLAG_SWAP_DIRECTION_LOAD 0 +#define CP_FLAG_SWAP_DIRECTION_SAVE 1 +#define CP_FLAG_USER_SAVE ((0 * 32) + 5) +#define CP_FLAG_USER_SAVE_NOT_PENDING 0 +#define CP_FLAG_USER_SAVE_PENDING 1 +#define CP_FLAG_USER_LOAD ((0 * 32) + 6) +#define CP_FLAG_USER_LOAD_NOT_PENDING 0 +#define CP_FLAG_USER_LOAD_PENDING 1 +#define CP_FLAG_STATUS ((3 * 32) + 0) +#define CP_FLAG_STATUS_IDLE 0 +#define CP_FLAG_STATUS_BUSY 1 +#define CP_FLAG_AUTO_SAVE ((3 * 32) + 4) +#define CP_FLAG_AUTO_SAVE_NOT_PENDING 0 +#define CP_FLAG_AUTO_SAVE_PENDING 1 +#define CP_FLAG_AUTO_LOAD ((3 * 32) + 5) +#define CP_FLAG_AUTO_LOAD_NOT_PENDING 0 +#define CP_FLAG_AUTO_LOAD_PENDING 1 +#define CP_FLAG_UNK54 ((3 * 32) + 6) +#define CP_FLAG_UNK54_CLEAR 0 +#define CP_FLAG_UNK54_SET 1 +#define CP_FLAG_ALWAYS ((3 * 32) + 8) +#define CP_FLAG_ALWAYS_FALSE 0 +#define CP_FLAG_ALWAYS_TRUE 1 +#define CP_FLAG_UNK57 ((3 * 32) + 9) +#define CP_FLAG_UNK57_CLEAR 0 +#define CP_FLAG_UNK57_SET 1 + +#define CP_CTX 0x00100000 +#define CP_CTX_COUNT 0x000fc000 +#define CP_CTX_COUNT_SHIFT 14 +#define CP_CTX_REG 0x00003fff +#define CP_LOAD_SR 0x00200000 +#define CP_LOAD_SR_VALUE 0x000fffff +#define CP_BRA 0x00400000 +#define CP_BRA_IP 0x0000ff00 +#define CP_BRA_IP_SHIFT 8 +#define CP_BRA_IF_CLEAR 0x00000080 +#define CP_BRA_FLAG 0x0000007f +#define CP_WAIT 0x00500000 +#define CP_WAIT_SET 0x00000080 +#define CP_WAIT_FLAG 0x0000007f +#define CP_SET 0x00700000 +#define CP_SET_1 0x00000080 +#define CP_SET_FLAG 0x0000007f +#define CP_NEXT_TO_SWAP 0x00600007 +#define CP_NEXT_TO_CURRENT 0x00600009 +#define CP_SET_CONTEXT_POINTER 0x0060000a +#define CP_END 0x0060000e +#define CP_LOAD_MAGIC_UNK01 0x00800001 /* unknown */ +#define CP_LOAD_MAGIC_NV44TCL 0x00800029 /* per-vs state (0x4497) */ +#define CP_LOAD_MAGIC_NV40TCL 0x00800041 /* per-vs state (0x4097) */ + +#include "drmP.h" +#include "nouveau_drv.h" +#include "nouveau_grctx.h" + +/* TODO: + * - get vs count from 0x1540 + * - document unimplemented bits compared to nvidia + * - nsource handling + * - R0 & 0x0200 handling + * - single-vs handling + * - 400314 bit 0 + */ + +static int +nv40_graph_4097(struct drm_device *dev) +{ + struct drm_nouveau_private *dev_priv = dev->dev_private; + + if ((dev_priv->chipset & 0xf0) == 0x60) + return 0; + + return !!(0x0baf & (1 << dev_priv->chipset)); +} + +static int +nv40_graph_vs_count(struct drm_device *dev) +{ + struct drm_nouveau_private *dev_priv = dev->dev_private; + + switch (dev_priv->chipset) { + case 0x47: + case 0x49: + case 0x4b: + return 8; + case 0x40: + return 6; + case 0x41: + case 0x42: + return 5; + case 0x43: + case 0x44: + case 0x46: + case 0x4a: + return 3; + case 0x4c: + case 0x4e: + case 0x67: + default: + return 1; + } +} + + +enum cp_label { + cp_check_load = 1, + cp_setup_auto_load, + cp_setup_load, + cp_setup_save, + cp_swap_state, + cp_swap_state3d_3_is_save, + cp_prepare_exit, + cp_exit, +}; + +static void +nv40_graph_construct_general(struct nouveau_grctx *ctx) +{ + struct drm_nouveau_private *dev_priv = ctx->dev->dev_private; + int i; + + cp_ctx(ctx, 0x4000a4, 1); + gr_def(ctx, 0x4000a4, 0x00000008); + cp_ctx(ctx, 0x400144, 58); + gr_def(ctx, 0x400144, 0x00000001); + cp_ctx(ctx, 0x400314, 1); + gr_def(ctx, 0x400314, 0x00000000); + cp_ctx(ctx, 0x400400, 10); + cp_ctx(ctx, 0x400480, 10); + cp_ctx(ctx, 0x400500, 19); + gr_def(ctx, 0x400514, 0x00040000); + gr_def(ctx, 0x400524, 0x55555555); + gr_def(ctx, 0x400528, 0x55555555); + gr_def(ctx, 0x40052c, 0x55555555); + gr_def(ctx, 0x400530, 0x55555555); + cp_ctx(ctx, 0x400560, 6); + gr_def(ctx, 0x400568, 0x0000ffff); + gr_def(ctx, 0x40056c, 0x0000ffff); + cp_ctx(ctx, 0x40057c, 5); + cp_ctx(ctx, 0x400710, 3); + gr_def(ctx, 0x400710, 0x20010001); + gr_def(ctx, 0x400714, 0x0f73ef00); + cp_ctx(ctx, 0x400724, 1); + gr_def(ctx, 0x400724, 0x02008821); + cp_ctx(ctx, 0x400770, 3); + if (dev_priv->chipset == 0x40) { + cp_ctx(ctx, 0x400814, 4); + cp_ctx(ctx, 0x400828, 5); + cp_ctx(ctx, 0x400840, 5); + gr_def(ctx, 0x400850, 0x00000040); + cp_ctx(ctx, 0x400858, 4); + gr_def(ctx, 0x400858, 0x00000040); + gr_def(ctx, 0x40085c, 0x00000040); + gr_def(ctx, 0x400864, 0x80000000); + cp_ctx(ctx, 0x40086c, 9); + gr_def(ctx, 0x40086c, 0x80000000); + gr_def(ctx, 0x400870, 0x80000000); + gr_def(ctx, 0x400874, 0x80000000); + gr_def(ctx, 0x400878, 0x80000000); + gr_def(ctx, 0x400888, 0x00000040); + gr_def(ctx, 0x40088c, 0x80000000); + cp_ctx(ctx, 0x4009c0, 8); + gr_def(ctx, 0x4009cc, 0x80000000); + gr_def(ctx, 0x4009dc, 0x80000000); + } else { + cp_ctx(ctx, 0x400840, 20); + if (!nv40_graph_4097(ctx->dev)) { + for (i = 0; i < 8; i++) + gr_def(ctx, 0x400860 + (i * 4), 0x00000001); + } + gr_def(ctx, 0x400880, 0x00000040); + gr_def(ctx, 0x400884, 0x00000040); + gr_def(ctx, 0x400888, 0x00000040); + cp_ctx(ctx, 0x400894, 11); + gr_def(ctx, 0x400894, 0x00000040); + if (nv40_graph_4097(ctx->dev)) { + for (i = 0; i < 8; i++) + gr_def(ctx, 0x4008a0 + (i * 4), 0x80000000); + } + cp_ctx(ctx, 0x4008e0, 2); + cp_ctx(ctx, 0x4008f8, 2); + if (dev_priv->chipset == 0x4c || + (dev_priv->chipset & 0xf0) == 0x60) + cp_ctx(ctx, 0x4009f8, 1); + } + cp_ctx(ctx, 0x400a00, 73); + gr_def(ctx, 0x400b0c, 0x0b0b0b0c); + cp_ctx(ctx, 0x401000, 4); + cp_ctx(ctx, 0x405004, 1); + switch (dev_priv->chipset) { + case 0x47: + case 0x49: + case 0x4b: + cp_ctx(ctx, 0x403448, 1); + gr_def(ctx, 0x403448, 0x00001010); + break; + default: + cp_ctx(ctx, 0x403440, 1); + switch (dev_priv->chipset) { + case 0x40: + gr_def(ctx, 0x403440, 0x00000010); + break; + case 0x44: + case 0x46: + case 0x4a: + gr_def(ctx, 0x403440, 0x00003010); + break; + case 0x41: + case 0x42: + case 0x43: + case 0x4c: + case 0x4e: + case 0x67: + default: + gr_def(ctx, 0x403440, 0x00001010); + break; + } + break; + } +} + +static void +nv40_graph_construct_state3d(struct nouveau_grctx *ctx) +{ + struct drm_nouveau_private *dev_priv = ctx->dev->dev_private; + int i; + + if (dev_priv->chipset == 0x40) { + cp_ctx(ctx, 0x401880, 51); + gr_def(ctx, 0x401940, 0x00000100); + } else + if (dev_priv->chipset == 0x46 || dev_priv->chipset == 0x47 || + dev_priv->chipset == 0x49 || dev_priv->chipset == 0x4b) { + cp_ctx(ctx, 0x401880, 32); + for (i = 0; i < 16; i++) + gr_def(ctx, 0x401880 + (i * 4), 0x00000111); + if (dev_priv->chipset == 0x46) + cp_ctx(ctx, 0x401900, 16); + cp_ctx(ctx, 0x401940, 3); + } + cp_ctx(ctx, 0x40194c, 18); + gr_def(ctx, 0x401954, 0x00000111); + gr_def(ctx, 0x401958, 0x00080060); + gr_def(ctx, 0x401974, 0x00000080); + gr_def(ctx, 0x401978, 0xffff0000); + gr_def(ctx, 0x40197c, 0x00000001); + gr_def(ctx, 0x401990, 0x46400000); + if (dev_priv->chipset == 0x40) { + cp_ctx(ctx, 0x4019a0, 2); + cp_ctx(ctx, 0x4019ac, 5); + } else { + cp_ctx(ctx, 0x4019a0, 1); + cp_ctx(ctx, 0x4019b4, 3); + } + gr_def(ctx, 0x4019bc, 0xffff0000); + switch (dev_priv->chipset) { + case 0x46: + case 0x47: + case 0x49: + case 0x4b: + cp_ctx(ctx, 0x4019c0, 18); + for (i = 0; i < 16; i++) + gr_def(ctx, 0x4019c0 + (i * 4), 0x88888888); + break; + } + cp_ctx(ctx, 0x401a08, 8); + gr_def(ctx, 0x401a10, 0x0fff0000); + gr_def(ctx, 0x401a14, 0x0fff0000); + gr_def(ctx, 0x401a1c, 0x00011100); + cp_ctx(ctx, 0x401a2c, 4); + cp_ctx(ctx, 0x401a44, 26); + for (i = 0; i < 16; i++) + gr_def(ctx, 0x401a44 + (i * 4), 0x07ff0000); + gr_def(ctx, 0x401a8c, 0x4b7fffff); + if (dev_priv->chipset == 0x40) { + cp_ctx(ctx, 0x401ab8, 3); + } else { + cp_ctx(ctx, 0x401ab8, 1); + cp_ctx(ctx, 0x401ac0, 1); + } + cp_ctx(ctx, 0x401ad0, 8); + gr_def(ctx, 0x401ad0, 0x30201000); + gr_def(ctx, 0x401ad4, 0x70605040); + gr_def(ctx, 0x401ad8, 0xb8a89888); + gr_def(ctx, 0x401adc, 0xf8e8d8c8); + cp_ctx(ctx, 0x401b10, dev_priv->chipset == 0x40 ? 2 : 1); + gr_def(ctx, 0x401b10, 0x40100000); + cp_ctx(ctx, 0x401b18, dev_priv->chipset == 0x40 ? 6 : 5); + gr_def(ctx, 0x401b28, dev_priv->chipset == 0x40 ? + 0x00000004 : 0x00000000); + cp_ctx(ctx, 0x401b30, 25); + gr_def(ctx, 0x401b34, 0x0000ffff); + gr_def(ctx, 0x401b68, 0x435185d6); + gr_def(ctx, 0x401b6c, 0x2155b699); + gr_def(ctx, 0x401b70, 0xfedcba98); + gr_def(ctx, 0x401b74, 0x00000098); + gr_def(ctx, 0x401b84, 0xffffffff); + gr_def(ctx, 0x401b88, 0x00ff7000); + gr_def(ctx, 0x401b8c, 0x0000ffff); + if (dev_priv->chipset != 0x44 && dev_priv->chipset != 0x4a && + dev_priv->chipset != 0x4e) + cp_ctx(ctx, 0x401b94, 1); + cp_ctx(ctx, 0x401b98, 8); + gr_def(ctx, 0x401b9c, 0x00ff0000); + cp_ctx(ctx, 0x401bc0, 9); + gr_def(ctx, 0x401be0, 0x00ffff00); + cp_ctx(ctx, 0x401c00, 192); + for (i = 0; i < 16; i++) { /* fragment texture units */ + gr_def(ctx, 0x401c40 + (i * 4), 0x00018488); + gr_def(ctx, 0x401c80 + (i * 4), 0x00028202); + gr_def(ctx, 0x401d00 + (i * 4), 0x0000aae4); + gr_def(ctx, 0x401d40 + (i * 4), 0x01012000); + gr_def(ctx, 0x401d80 + (i * 4), 0x00080008); + gr_def(ctx, 0x401e00 + (i * 4), 0x00100008); + } + for (i = 0; i < 4; i++) { /* vertex texture units */ + gr_def(ctx, 0x401e90 + (i * 4), 0x0001bc80); + gr_def(ctx, 0x401ea0 + (i * 4), 0x00000202); + gr_def(ctx, 0x401ec0 + (i * 4), 0x00000008); + gr_def(ctx, 0x401ee0 + (i * 4), 0x00080008); + } + cp_ctx(ctx, 0x400f5c, 3); + gr_def(ctx, 0x400f5c, 0x00000002); + cp_ctx(ctx, 0x400f84, 1); +} + +static void +nv40_graph_construct_state3d_2(struct nouveau_grctx *ctx) +{ + struct drm_nouveau_private *dev_priv = ctx->dev->dev_private; + int i; + + cp_ctx(ctx, 0x402000, 1); + cp_ctx(ctx, 0x402404, dev_priv->chipset == 0x40 ? 1 : 2); + switch (dev_priv->chipset) { + case 0x40: + gr_def(ctx, 0x402404, 0x00000001); + break; + case 0x4c: + case 0x4e: + case 0x67: + gr_def(ctx, 0x402404, 0x00000020); + break; + case 0x46: + case 0x49: + case 0x4b: + gr_def(ctx, 0x402404, 0x00000421); + break; + default: + gr_def(ctx, 0x402404, 0x00000021); + } + if (dev_priv->chipset != 0x40) + gr_def(ctx, 0x402408, 0x030c30c3); + switch (dev_priv->chipset) { + case 0x44: + case 0x46: + case 0x4a: + case 0x4c: + case 0x4e: + case 0x67: + cp_ctx(ctx, 0x402440, 1); + gr_def(ctx, 0x402440, 0x00011001); + break; + default: + break; + } + cp_ctx(ctx, 0x402480, dev_priv->chipset == 0x40 ? 8 : 9); + gr_def(ctx, 0x402488, 0x3e020200); + gr_def(ctx, 0x40248c, 0x00ffffff); + switch (dev_priv->chipset) { + case 0x40: + gr_def(ctx, 0x402490, 0x60103f00); + break; + case 0x47: + gr_def(ctx, 0x402490, 0x40103f00); + break; + case 0x41: + case 0x42: + case 0x49: + case 0x4b: + gr_def(ctx, 0x402490, 0x20103f00); + break; + default: + gr_def(ctx, 0x402490, 0x0c103f00); + break; + } + gr_def(ctx, 0x40249c, dev_priv->chipset <= 0x43 ? + 0x00020000 : 0x00040000); + cp_ctx(ctx, 0x402500, 31); + gr_def(ctx, 0x402530, 0x00008100); + if (dev_priv->chipset == 0x40) + cp_ctx(ctx, 0x40257c, 6); + cp_ctx(ctx, 0x402594, 16); + cp_ctx(ctx, 0x402800, 17); + gr_def(ctx, 0x402800, 0x00000001); + switch (dev_priv->chipset) { + case 0x47: + case 0x49: + case 0x4b: + cp_ctx(ctx, 0x402864, 1); + gr_def(ctx, 0x402864, 0x00001001); + cp_ctx(ctx, 0x402870, 3); + gr_def(ctx, 0x402878, 0x00000003); + if (dev_priv->chipset != 0x47) { /* belong at end!! */ + cp_ctx(ctx, 0x402900, 1); + cp_ctx(ctx, 0x402940, 1); + cp_ctx(ctx, 0x402980, 1); + cp_ctx(ctx, 0x4029c0, 1); + cp_ctx(ctx, 0x402a00, 1); + cp_ctx(ctx, 0x402a40, 1); + cp_ctx(ctx, 0x402a80, 1); + cp_ctx(ctx, 0x402ac0, 1); + } + break; + case 0x40: + cp_ctx(ctx, 0x402844, 1); + gr_def(ctx, 0x402844, 0x00000001); + cp_ctx(ctx, 0x402850, 1); + break; + default: + cp_ctx(ctx, 0x402844, 1); + gr_def(ctx, 0x402844, 0x00001001); + cp_ctx(ctx, 0x402850, 2); + gr_def(ctx, 0x402854, 0x00000003); + break; + } + + cp_ctx(ctx, 0x402c00, 4); + gr_def(ctx, 0x402c00, dev_priv->chipset == 0x40 ? + 0x80800001 : 0x00888001); + switch (dev_priv->chipset) { + case 0x47: + case 0x49: + case 0x4b: + cp_ctx(ctx, 0x402c20, 40); + for (i = 0; i < 32; i++) + gr_def(ctx, 0x402c40 + (i * 4), 0xffffffff); + cp_ctx(ctx, 0x4030b8, 13); + gr_def(ctx, 0x4030dc, 0x00000005); + gr_def(ctx, 0x4030e8, 0x0000ffff); + break; + default: + cp_ctx(ctx, 0x402c10, 4); + if (dev_priv->chipset == 0x40) + cp_ctx(ctx, 0x402c20, 36); + else + if (dev_priv->chipset <= 0x42) + cp_ctx(ctx, 0x402c20, 24); + else + if (dev_priv->chipset <= 0x4a) + cp_ctx(ctx, 0x402c20, 16); + else + cp_ctx(ctx, 0x402c20, 8); + cp_ctx(ctx, 0x402cb0, dev_priv->chipset == 0x40 ? 12 : 13); + gr_def(ctx, 0x402cd4, 0x00000005); + if (dev_priv->chipset != 0x40) + gr_def(ctx, 0x402ce0, 0x0000ffff); + break; + } + + cp_ctx(ctx, 0x403400, dev_priv->chipset == 0x40 ? 4 : 3); + cp_ctx(ctx, 0x403410, dev_priv->chipset == 0x40 ? 4 : 3); + cp_ctx(ctx, 0x403420, nv40_graph_vs_count(ctx->dev)); + for (i = 0; i < nv40_graph_vs_count(ctx->dev); i++) + gr_def(ctx, 0x403420 + (i * 4), 0x00005555); + + if (dev_priv->chipset != 0x40) { + cp_ctx(ctx, 0x403600, 1); + gr_def(ctx, 0x403600, 0x00000001); + } + cp_ctx(ctx, 0x403800, 1); + + cp_ctx(ctx, 0x403c18, 1); + gr_def(ctx, 0x403c18, 0x00000001); + switch (dev_priv->chipset) { + case 0x46: + case 0x47: + case 0x49: + case 0x4b: + cp_ctx(ctx, 0x405018, 1); + gr_def(ctx, 0x405018, 0x08e00001); + cp_ctx(ctx, 0x405c24, 1); + gr_def(ctx, 0x405c24, 0x000e3000); + break; + } + if (dev_priv->chipset != 0x4e) + cp_ctx(ctx, 0x405800, 11); + cp_ctx(ctx, 0x407000, 1); +} + +static void +nv40_graph_construct_state3d_3(struct nouveau_grctx *ctx) +{ + int len = nv40_graph_4097(ctx->dev) ? 0x0684 : 0x0084; + + cp_out (ctx, 0x300000); + cp_lsr (ctx, len - 4); + cp_bra (ctx, SWAP_DIRECTION, SAVE, cp_swap_state3d_3_is_save); + cp_lsr (ctx, len); + cp_name(ctx, cp_swap_state3d_3_is_save); + cp_out (ctx, 0x800001); + + ctx->ctxvals_pos += len; +} + +static void +nv40_graph_construct_shader(struct nouveau_grctx *ctx) +{ + struct drm_device *dev = ctx->dev; + struct drm_nouveau_private *dev_priv = dev->dev_private; + struct nouveau_gpuobj *obj = ctx->data; + int vs, vs_nr, vs_len, vs_nr_b0, vs_nr_b1, b0_offset, b1_offset; + int offset, i; + + vs_nr = nv40_graph_vs_count(ctx->dev); + vs_nr_b0 = 363; + vs_nr_b1 = dev_priv->chipset == 0x40 ? 128 : 64; + if (dev_priv->chipset == 0x40) { + b0_offset = 0x2200/4; /* 33a0 */ + b1_offset = 0x55a0/4; /* 1500 */ + vs_len = 0x6aa0/4; + } else + if (dev_priv->chipset == 0x41 || dev_priv->chipset == 0x42) { + b0_offset = 0x2200/4; /* 2200 */ + b1_offset = 0x4400/4; /* 0b00 */ + vs_len = 0x4f00/4; + } else { + b0_offset = 0x1d40/4; /* 2200 */ + b1_offset = 0x3f40/4; /* 0b00 : 0a40 */ + vs_len = nv40_graph_4097(dev) ? 0x4a40/4 : 0x4980/4; + } + + cp_lsr(ctx, vs_len * vs_nr + 0x300/4); + cp_out(ctx, nv40_graph_4097(dev) ? 0x800041 : 0x800029); + + offset = ctx->ctxvals_pos; + ctx->ctxvals_pos += (0x0300/4 + (vs_nr * vs_len)); + + if (ctx->mode != NOUVEAU_GRCTX_VALS) + return; + + offset += 0x0280/4; + for (i = 0; i < 16; i++, offset += 2) + nv_wo32(dev, obj, offset, 0x3f800000); + + for (vs = 0; vs < vs_nr; vs++, offset += vs_len) { + for (i = 0; i < vs_nr_b0 * 6; i += 6) + nv_wo32(dev, obj, offset + b0_offset + i, 0x00000001); + for (i = 0; i < vs_nr_b1 * 4; i += 4) + nv_wo32(dev, obj, offset + b1_offset + i, 0x3f800000); + } +} + +void +nv40_grctx_init(struct nouveau_grctx *ctx) +{ + /* decide whether we're loading/unloading the context */ + cp_bra (ctx, AUTO_SAVE, PENDING, cp_setup_save); + cp_bra (ctx, USER_SAVE, PENDING, cp_setup_save); + + cp_name(ctx, cp_check_load); + cp_bra (ctx, AUTO_LOAD, PENDING, cp_setup_auto_load); + cp_bra (ctx, USER_LOAD, PENDING, cp_setup_load); + cp_bra (ctx, ALWAYS, TRUE, cp_exit); + + /* setup for context load */ + cp_name(ctx, cp_setup_auto_load); + cp_wait(ctx, STATUS, IDLE); + cp_out (ctx, CP_NEXT_TO_SWAP); + cp_name(ctx, cp_setup_load); + cp_wait(ctx, STATUS, IDLE); + cp_set (ctx, SWAP_DIRECTION, LOAD); + cp_out (ctx, 0x00910880); /* ?? */ + cp_out (ctx, 0x00901ffe); /* ?? */ + cp_out (ctx, 0x01940000); /* ?? */ + cp_lsr (ctx, 0x20); + cp_out (ctx, 0x0060000b); /* ?? */ + cp_wait(ctx, UNK57, CLEAR); + cp_out (ctx, 0x0060000c); /* ?? */ + cp_bra (ctx, ALWAYS, TRUE, cp_swap_state); + + /* setup for context save */ + cp_name(ctx, cp_setup_save); + cp_set (ctx, SWAP_DIRECTION, SAVE); + + /* general PGRAPH state */ + cp_name(ctx, cp_swap_state); + cp_pos (ctx, 0x00020/4); + nv40_graph_construct_general(ctx); + cp_wait(ctx, STATUS, IDLE); + + /* 3D state, block 1 */ + cp_bra (ctx, UNK54, CLEAR, cp_prepare_exit); + nv40_graph_construct_state3d(ctx); + cp_wait(ctx, STATUS, IDLE); + + /* 3D state, block 2 */ + nv40_graph_construct_state3d_2(ctx); + + /* Some other block of "random" state */ + nv40_graph_construct_state3d_3(ctx); + + /* Per-vertex shader state */ + cp_pos (ctx, ctx->ctxvals_pos); + nv40_graph_construct_shader(ctx); + + /* pre-exit state updates */ + cp_name(ctx, cp_prepare_exit); + cp_bra (ctx, SWAP_DIRECTION, SAVE, cp_check_load); + cp_bra (ctx, USER_SAVE, PENDING, cp_exit); + cp_out (ctx, CP_NEXT_TO_CURRENT); + + cp_name(ctx, cp_exit); + cp_set (ctx, USER_SAVE, NOT_PENDING); + cp_set (ctx, USER_LOAD, NOT_PENDING); + cp_out (ctx, CP_END); +} + diff --git a/drivers/gpu/drm/nouveau/nv50_crtc.c b/drivers/gpu/drm/nouveau/nv50_crtc.c index f8e28a1e44e7..118d3285fd8c 100644 --- a/drivers/gpu/drm/nouveau/nv50_crtc.c +++ b/drivers/gpu/drm/nouveau/nv50_crtc.c @@ -45,7 +45,7 @@ nv50_crtc_lut_load(struct drm_crtc *crtc) void __iomem *lut = nvbo_kmap_obj_iovirtual(nv_crtc->lut.nvbo); int i; - NV_DEBUG(crtc->dev, "\n"); + NV_DEBUG_KMS(crtc->dev, "\n"); for (i = 0; i < 256; i++) { writew(nv_crtc->lut.r[i] >> 2, lut + 8*i + 0); @@ -68,8 +68,8 @@ nv50_crtc_blank(struct nouveau_crtc *nv_crtc, bool blanked) struct nouveau_channel *evo = dev_priv->evo; int index = nv_crtc->index, ret; - NV_DEBUG(dev, "index %d\n", nv_crtc->index); - NV_DEBUG(dev, "%s\n", blanked ? "blanked" : "unblanked"); + NV_DEBUG_KMS(dev, "index %d\n", nv_crtc->index); + NV_DEBUG_KMS(dev, "%s\n", blanked ? "blanked" : "unblanked"); if (blanked) { nv_crtc->cursor.hide(nv_crtc, false); @@ -139,7 +139,7 @@ nv50_crtc_set_dither(struct nouveau_crtc *nv_crtc, bool on, bool update) struct nouveau_channel *evo = dev_priv->evo; int ret; - NV_DEBUG(dev, "\n"); + NV_DEBUG_KMS(dev, "\n"); ret = RING_SPACE(evo, 2 + (update ? 2 : 0)); if (ret) { @@ -193,7 +193,7 @@ nv50_crtc_set_scale(struct nouveau_crtc *nv_crtc, int scaling_mode, bool update) uint32_t outX, outY, horiz, vert; int ret; - NV_DEBUG(dev, "\n"); + NV_DEBUG_KMS(dev, "\n"); switch (scaling_mode) { case DRM_MODE_SCALE_NONE: @@ -301,7 +301,7 @@ nv50_crtc_destroy(struct drm_crtc *crtc) struct drm_device *dev = crtc->dev; struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc); - NV_DEBUG(dev, "\n"); + NV_DEBUG_KMS(dev, "\n"); if (!crtc) return; @@ -433,7 +433,7 @@ nv50_crtc_prepare(struct drm_crtc *crtc) struct drm_device *dev = crtc->dev; struct drm_encoder *encoder; - NV_DEBUG(dev, "index %d\n", nv_crtc->index); + NV_DEBUG_KMS(dev, "index %d\n", nv_crtc->index); /* Disconnect all unused encoders. */ list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) { @@ -458,7 +458,7 @@ nv50_crtc_commit(struct drm_crtc *crtc) struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc); int ret; - NV_DEBUG(dev, "index %d\n", nv_crtc->index); + NV_DEBUG_KMS(dev, "index %d\n", nv_crtc->index); nv50_crtc_blank(nv_crtc, false); @@ -497,7 +497,7 @@ nv50_crtc_do_mode_set_base(struct drm_crtc *crtc, int x, int y, struct nouveau_framebuffer *fb = nouveau_framebuffer(drm_fb); int ret, format; - NV_DEBUG(dev, "index %d\n", nv_crtc->index); + NV_DEBUG_KMS(dev, "index %d\n", nv_crtc->index); switch (drm_fb->depth) { case 8: @@ -612,7 +612,7 @@ nv50_crtc_mode_set(struct drm_crtc *crtc, struct drm_display_mode *mode, *nv_crtc->mode = *adjusted_mode; - NV_DEBUG(dev, "index %d\n", nv_crtc->index); + NV_DEBUG_KMS(dev, "index %d\n", nv_crtc->index); hsync_dur = adjusted_mode->hsync_end - adjusted_mode->hsync_start; vsync_dur = adjusted_mode->vsync_end - adjusted_mode->vsync_start; @@ -706,7 +706,7 @@ nv50_crtc_create(struct drm_device *dev, int index) struct nouveau_crtc *nv_crtc = NULL; int ret, i; - NV_DEBUG(dev, "\n"); + NV_DEBUG_KMS(dev, "\n"); nv_crtc = kzalloc(sizeof(*nv_crtc), GFP_KERNEL); if (!nv_crtc) diff --git a/drivers/gpu/drm/nouveau/nv50_cursor.c b/drivers/gpu/drm/nouveau/nv50_cursor.c index e2e79a8f220d..753e723adb3a 100644 --- a/drivers/gpu/drm/nouveau/nv50_cursor.c +++ b/drivers/gpu/drm/nouveau/nv50_cursor.c @@ -41,7 +41,7 @@ nv50_cursor_show(struct nouveau_crtc *nv_crtc, bool update) struct drm_device *dev = nv_crtc->base.dev; int ret; - NV_DEBUG(dev, "\n"); + NV_DEBUG_KMS(dev, "\n"); if (update && nv_crtc->cursor.visible) return; @@ -76,7 +76,7 @@ nv50_cursor_hide(struct nouveau_crtc *nv_crtc, bool update) struct drm_device *dev = nv_crtc->base.dev; int ret; - NV_DEBUG(dev, "\n"); + NV_DEBUG_KMS(dev, "\n"); if (update && !nv_crtc->cursor.visible) return; @@ -116,7 +116,7 @@ nv50_cursor_set_pos(struct nouveau_crtc *nv_crtc, int x, int y) static void nv50_cursor_set_offset(struct nouveau_crtc *nv_crtc, uint32_t offset) { - NV_DEBUG(nv_crtc->base.dev, "\n"); + NV_DEBUG_KMS(nv_crtc->base.dev, "\n"); if (offset == nv_crtc->cursor.offset) return; @@ -143,7 +143,7 @@ nv50_cursor_fini(struct nouveau_crtc *nv_crtc) struct drm_device *dev = nv_crtc->base.dev; int idx = nv_crtc->index; - NV_DEBUG(dev, "\n"); + NV_DEBUG_KMS(dev, "\n"); nv_wr32(dev, NV50_PDISPLAY_CURSOR_CURSOR_CTRL2(idx), 0); if (!nv_wait(NV50_PDISPLAY_CURSOR_CURSOR_CTRL2(idx), diff --git a/drivers/gpu/drm/nouveau/nv50_dac.c b/drivers/gpu/drm/nouveau/nv50_dac.c index fb5838e3be24..f08f042a8e10 100644 --- a/drivers/gpu/drm/nouveau/nv50_dac.c +++ b/drivers/gpu/drm/nouveau/nv50_dac.c @@ -44,7 +44,7 @@ nv50_dac_disconnect(struct nouveau_encoder *nv_encoder) struct nouveau_channel *evo = dev_priv->evo; int ret; - NV_DEBUG(dev, "Disconnecting DAC %d\n", nv_encoder->or); + NV_DEBUG_KMS(dev, "Disconnecting DAC %d\n", nv_encoder->or); ret = RING_SPACE(evo, 2); if (ret) { @@ -81,11 +81,11 @@ nv50_dac_detect(struct drm_encoder *encoder, struct drm_connector *connector) /* Use bios provided value if possible. */ if (dev_priv->vbios->dactestval) { load_pattern = dev_priv->vbios->dactestval; - NV_DEBUG(dev, "Using bios provided load_pattern of %d\n", + NV_DEBUG_KMS(dev, "Using bios provided load_pattern of %d\n", load_pattern); } else { load_pattern = 340; - NV_DEBUG(dev, "Using default load_pattern of %d\n", + NV_DEBUG_KMS(dev, "Using default load_pattern of %d\n", load_pattern); } @@ -103,9 +103,9 @@ nv50_dac_detect(struct drm_encoder *encoder, struct drm_connector *connector) status = connector_status_connected; if (status == connector_status_connected) - NV_DEBUG(dev, "Load was detected on output with or %d\n", or); + NV_DEBUG_KMS(dev, "Load was detected on output with or %d\n", or); else - NV_DEBUG(dev, "Load was not detected on output with or %d\n", or); + NV_DEBUG_KMS(dev, "Load was not detected on output with or %d\n", or); return status; } @@ -118,7 +118,7 @@ nv50_dac_dpms(struct drm_encoder *encoder, int mode) uint32_t val; int or = nv_encoder->or; - NV_DEBUG(dev, "or %d mode %d\n", or, mode); + NV_DEBUG_KMS(dev, "or %d mode %d\n", or, mode); /* wait for it to be done */ if (!nv_wait(NV50_PDISPLAY_DAC_DPMS_CTRL(or), @@ -173,7 +173,7 @@ nv50_dac_mode_fixup(struct drm_encoder *encoder, struct drm_display_mode *mode, struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder); struct nouveau_connector *connector; - NV_DEBUG(encoder->dev, "or %d\n", nv_encoder->or); + NV_DEBUG_KMS(encoder->dev, "or %d\n", nv_encoder->or); connector = nouveau_encoder_connector_get(nv_encoder); if (!connector) { @@ -213,7 +213,7 @@ nv50_dac_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode, uint32_t mode_ctl = 0, mode_ctl2 = 0; int ret; - NV_DEBUG(dev, "or %d\n", nv_encoder->or); + NV_DEBUG_KMS(dev, "or %d\n", nv_encoder->or); nv50_dac_dpms(encoder, DRM_MODE_DPMS_ON); @@ -264,7 +264,7 @@ nv50_dac_destroy(struct drm_encoder *encoder) if (!encoder) return; - NV_DEBUG(encoder->dev, "\n"); + NV_DEBUG_KMS(encoder->dev, "\n"); drm_encoder_cleanup(encoder); kfree(nv_encoder); @@ -280,7 +280,7 @@ nv50_dac_create(struct drm_device *dev, struct dcb_entry *entry) struct nouveau_encoder *nv_encoder; struct drm_encoder *encoder; - NV_DEBUG(dev, "\n"); + NV_DEBUG_KMS(dev, "\n"); NV_INFO(dev, "Detected a DAC output\n"); nv_encoder = kzalloc(sizeof(*nv_encoder), GFP_KERNEL); diff --git a/drivers/gpu/drm/nouveau/nv50_display.c b/drivers/gpu/drm/nouveau/nv50_display.c index 12c5ee63495b..a9263d92a231 100644 --- a/drivers/gpu/drm/nouveau/nv50_display.c +++ b/drivers/gpu/drm/nouveau/nv50_display.c @@ -188,7 +188,7 @@ nv50_display_init(struct drm_device *dev) uint64_t start; int ret, i; - NV_DEBUG(dev, "\n"); + NV_DEBUG_KMS(dev, "\n"); nv_wr32(dev, 0x00610184, nv_rd32(dev, 0x00614004)); /* @@ -232,7 +232,7 @@ nv50_display_init(struct drm_device *dev) nv_wr32(dev, NV50_PDISPLAY_UNK_380, 0); /* RAM is clamped to 256 MiB. */ ram_amount = nouveau_mem_fb_amount(dev); - NV_DEBUG(dev, "ram_amount %d\n", ram_amount); + NV_DEBUG_KMS(dev, "ram_amount %d\n", ram_amount); if (ram_amount > 256*1024*1024) ram_amount = 256*1024*1024; nv_wr32(dev, NV50_PDISPLAY_RAM_AMOUNT, ram_amount - 1); @@ -398,7 +398,7 @@ static int nv50_display_disable(struct drm_device *dev) struct drm_crtc *drm_crtc; int ret, i; - NV_DEBUG(dev, "\n"); + NV_DEBUG_KMS(dev, "\n"); list_for_each_entry(drm_crtc, &dev->mode_config.crtc_list, head) { struct nouveau_crtc *crtc = nouveau_crtc(drm_crtc); @@ -469,7 +469,7 @@ int nv50_display_create(struct drm_device *dev) uint32_t connector[16] = {}; int ret, i; - NV_DEBUG(dev, "\n"); + NV_DEBUG_KMS(dev, "\n"); /* init basic kernel modesetting */ drm_mode_config_init(dev); @@ -573,7 +573,7 @@ int nv50_display_destroy(struct drm_device *dev) { struct drm_nouveau_private *dev_priv = dev->dev_private; - NV_DEBUG(dev, "\n"); + NV_DEBUG_KMS(dev, "\n"); drm_mode_config_cleanup(dev); @@ -617,7 +617,7 @@ nv50_display_irq_head(struct drm_device *dev, int *phead, * CRTC separately, and submission will be blocked by the GPU * until we handle each in turn. */ - NV_DEBUG(dev, "0x610030: 0x%08x\n", unk30); + NV_DEBUG_KMS(dev, "0x610030: 0x%08x\n", unk30); head = ffs((unk30 >> 9) & 3) - 1; if (head < 0) return -EINVAL; @@ -661,7 +661,7 @@ nv50_display_irq_head(struct drm_device *dev, int *phead, or = i; } - NV_DEBUG(dev, "type %d, or %d\n", type, or); + NV_DEBUG_KMS(dev, "type %d, or %d\n", type, or); if (type == OUTPUT_ANY) { NV_ERROR(dev, "unknown encoder!!\n"); return -1; @@ -811,7 +811,7 @@ nv50_display_unk20_handler(struct drm_device *dev) pclk = nv_rd32(dev, NV50_PDISPLAY_CRTC_P(head, CLOCK)) & 0x3fffff; script = nv50_display_script_select(dev, dcbent, pclk); - NV_DEBUG(dev, "head %d pxclk: %dKHz\n", head, pclk); + NV_DEBUG_KMS(dev, "head %d pxclk: %dKHz\n", head, pclk); if (dcbent->type != OUTPUT_DP) nouveau_bios_run_display_table(dev, dcbent, 0, -2); @@ -870,7 +870,7 @@ nv50_display_irq_handler_bh(struct work_struct *work) uint32_t intr0 = nv_rd32(dev, NV50_PDISPLAY_INTR_0); uint32_t intr1 = nv_rd32(dev, NV50_PDISPLAY_INTR_1); - NV_DEBUG(dev, "PDISPLAY_INTR_BH 0x%08x 0x%08x\n", intr0, intr1); + NV_DEBUG_KMS(dev, "PDISPLAY_INTR_BH 0x%08x 0x%08x\n", intr0, intr1); if (intr1 & NV50_PDISPLAY_INTR_1_CLK_UNK10) nv50_display_unk10_handler(dev); @@ -974,7 +974,7 @@ nv50_display_irq_handler(struct drm_device *dev) uint32_t intr1 = nv_rd32(dev, NV50_PDISPLAY_INTR_1); uint32_t clock; - NV_DEBUG(dev, "PDISPLAY_INTR 0x%08x 0x%08x\n", intr0, intr1); + NV_DEBUG_KMS(dev, "PDISPLAY_INTR 0x%08x 0x%08x\n", intr0, intr1); if (!intr0 && !(intr1 & ~delayed)) break; diff --git a/drivers/gpu/drm/nouveau/nv50_fifo.c b/drivers/gpu/drm/nouveau/nv50_fifo.c index 77ae1aaa0bce..b7282284f080 100644 --- a/drivers/gpu/drm/nouveau/nv50_fifo.c +++ b/drivers/gpu/drm/nouveau/nv50_fifo.c @@ -416,7 +416,7 @@ nv50_fifo_unload_context(struct drm_device *dev) NV_DEBUG(dev, "\n"); chid = pfifo->channel_id(dev); - if (chid < 0 || chid >= dev_priv->engine.fifo.channels) + if (chid < 1 || chid >= dev_priv->engine.fifo.channels - 1) return 0; chan = dev_priv->fifos[chid]; diff --git a/drivers/gpu/drm/nouveau/nv50_graph.c b/drivers/gpu/drm/nouveau/nv50_graph.c index 177d8229336f..ca79f32be44c 100644 --- a/drivers/gpu/drm/nouveau/nv50_graph.c +++ b/drivers/gpu/drm/nouveau/nv50_graph.c @@ -107,9 +107,13 @@ nv50_graph_init_regs(struct drm_device *dev) static int nv50_graph_init_ctxctl(struct drm_device *dev) { + struct drm_nouveau_private *dev_priv = dev->dev_private; + NV_DEBUG(dev, "\n"); - nv40_grctx_init(dev); + nouveau_grctx_prog_load(dev); + if (!dev_priv->engine.graph.ctxprog) + dev_priv->engine.graph.accel_blocked = true; nv_wr32(dev, 0x400320, 4); nv_wr32(dev, NV40_PGRAPH_CTXCTL_CUR, 0); @@ -140,7 +144,7 @@ void nv50_graph_takedown(struct drm_device *dev) { NV_DEBUG(dev, "\n"); - nv40_grctx_fini(dev); + nouveau_grctx_fini(dev); } void @@ -207,7 +211,7 @@ nv50_graph_create_context(struct nouveau_channel *chan) dev_priv->engine.instmem.finish_access(dev); dev_priv->engine.instmem.prepare_access(dev, true); - nv40_grctx_vals_load(dev, ctx); + nouveau_grctx_vals_load(dev, ctx); nv_wo32(dev, ctx, 0x00000/4, chan->ramin->instance >> 12); if ((dev_priv->chipset & 0xf0) == 0xa0) nv_wo32(dev, ctx, 0x00004/4, 0x00000000); diff --git a/drivers/gpu/drm/nouveau/nv50_sor.c b/drivers/gpu/drm/nouveau/nv50_sor.c index 8c280463a664..e395c16d30f5 100644 --- a/drivers/gpu/drm/nouveau/nv50_sor.c +++ b/drivers/gpu/drm/nouveau/nv50_sor.c @@ -44,7 +44,7 @@ nv50_sor_disconnect(struct nouveau_encoder *nv_encoder) struct nouveau_channel *evo = dev_priv->evo; int ret; - NV_DEBUG(dev, "Disconnecting SOR %d\n", nv_encoder->or); + NV_DEBUG_KMS(dev, "Disconnecting SOR %d\n", nv_encoder->or); ret = RING_SPACE(evo, 2); if (ret) { @@ -70,7 +70,7 @@ nv50_sor_dp_link_train(struct drm_encoder *encoder) } if (dpe->script0) { - NV_DEBUG(dev, "SOR-%d: running DP script 0\n", nv_encoder->or); + NV_DEBUG_KMS(dev, "SOR-%d: running DP script 0\n", nv_encoder->or); nouveau_bios_run_init_table(dev, le16_to_cpu(dpe->script0), nv_encoder->dcb); } @@ -79,7 +79,7 @@ nv50_sor_dp_link_train(struct drm_encoder *encoder) NV_ERROR(dev, "SOR-%d: link training failed\n", nv_encoder->or); if (dpe->script1) { - NV_DEBUG(dev, "SOR-%d: running DP script 1\n", nv_encoder->or); + NV_DEBUG_KMS(dev, "SOR-%d: running DP script 1\n", nv_encoder->or); nouveau_bios_run_init_table(dev, le16_to_cpu(dpe->script1), nv_encoder->dcb); } @@ -93,7 +93,7 @@ nv50_sor_dpms(struct drm_encoder *encoder, int mode) uint32_t val; int or = nv_encoder->or; - NV_DEBUG(dev, "or %d mode %d\n", or, mode); + NV_DEBUG_KMS(dev, "or %d mode %d\n", or, mode); /* wait for it to be done */ if (!nv_wait(NV50_PDISPLAY_SOR_DPMS_CTRL(or), @@ -142,7 +142,7 @@ nv50_sor_mode_fixup(struct drm_encoder *encoder, struct drm_display_mode *mode, struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder); struct nouveau_connector *connector; - NV_DEBUG(encoder->dev, "or %d\n", nv_encoder->or); + NV_DEBUG_KMS(encoder->dev, "or %d\n", nv_encoder->or); connector = nouveau_encoder_connector_get(nv_encoder); if (!connector) { @@ -182,7 +182,7 @@ nv50_sor_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode, uint32_t mode_ctl = 0; int ret; - NV_DEBUG(dev, "or %d\n", nv_encoder->or); + NV_DEBUG_KMS(dev, "or %d\n", nv_encoder->or); nv50_sor_dpms(encoder, DRM_MODE_DPMS_ON); @@ -246,7 +246,7 @@ nv50_sor_destroy(struct drm_encoder *encoder) if (!encoder) return; - NV_DEBUG(encoder->dev, "\n"); + NV_DEBUG_KMS(encoder->dev, "\n"); drm_encoder_cleanup(encoder); @@ -265,7 +265,7 @@ nv50_sor_create(struct drm_device *dev, struct dcb_entry *entry) bool dum; int type; - NV_DEBUG(dev, "\n"); + NV_DEBUG_KMS(dev, "\n"); switch (entry->type) { case OUTPUT_TMDS: diff --git a/drivers/gpu/drm/r128/r128_drv.c b/drivers/gpu/drm/r128/r128_drv.c index 601f4c0e5da5..b806fdcc7170 100644 --- a/drivers/gpu/drm/r128/r128_drv.c +++ b/drivers/gpu/drm/r128/r128_drv.c @@ -64,7 +64,7 @@ static struct drm_driver driver = { .owner = THIS_MODULE, .open = drm_open, .release = drm_release, - .ioctl = drm_ioctl, + .unlocked_ioctl = drm_ioctl, .mmap = drm_mmap, .poll = drm_poll, .fasync = drm_fasync, diff --git a/drivers/gpu/drm/r128/r128_ioc32.c b/drivers/gpu/drm/r128/r128_ioc32.c index d3cb676eee84..51c99fc4dd38 100644 --- a/drivers/gpu/drm/r128/r128_ioc32.c +++ b/drivers/gpu/drm/r128/r128_ioc32.c @@ -95,8 +95,7 @@ static int compat_r128_init(struct file *file, unsigned int cmd, &init->agp_textures_offset)) return -EFAULT; - return drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_R128_INIT, (unsigned long)init); + return drm_ioctl(file, DRM_IOCTL_R128_INIT, (unsigned long)init); } typedef struct drm_r128_depth32 { @@ -129,8 +128,7 @@ static int compat_r128_depth(struct file *file, unsigned int cmd, &depth->mask)) return -EFAULT; - return drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_R128_DEPTH, (unsigned long)depth); + return drm_ioctl(file, DRM_IOCTL_R128_DEPTH, (unsigned long)depth); } @@ -153,8 +151,7 @@ static int compat_r128_stipple(struct file *file, unsigned int cmd, &stipple->mask)) return -EFAULT; - return drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_R128_STIPPLE, (unsigned long)stipple); + return drm_ioctl(file, DRM_IOCTL_R128_STIPPLE, (unsigned long)stipple); } typedef struct drm_r128_getparam32 { @@ -178,8 +175,7 @@ static int compat_r128_getparam(struct file *file, unsigned int cmd, &getparam->value)) return -EFAULT; - return drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_R128_GETPARAM, (unsigned long)getparam); + return drm_ioctl(file, DRM_IOCTL_R128_GETPARAM, (unsigned long)getparam); } drm_ioctl_compat_t *r128_compat_ioctls[] = { @@ -210,12 +206,10 @@ long r128_compat_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) if (nr < DRM_COMMAND_BASE + DRM_ARRAY_SIZE(r128_compat_ioctls)) fn = r128_compat_ioctls[nr - DRM_COMMAND_BASE]; - lock_kernel(); /* XXX for now */ if (fn != NULL) ret = (*fn) (filp, cmd, arg); else - ret = drm_ioctl(filp->f_path.dentry->d_inode, filp, cmd, arg); - unlock_kernel(); + ret = drm_ioctl(filp, cmd, arg); return ret; } diff --git a/drivers/gpu/drm/radeon/atom.c b/drivers/gpu/drm/radeon/atom.c index 6578d19dff93..388140a7e651 100644 --- a/drivers/gpu/drm/radeon/atom.c +++ b/drivers/gpu/drm/radeon/atom.c @@ -58,6 +58,7 @@ typedef struct { } atom_exec_context; int atom_debug = 0; +static void atom_execute_table_locked(struct atom_context *ctx, int index, uint32_t * params); void atom_execute_table(struct atom_context *ctx, int index, uint32_t * params); static uint32_t atom_arg_mask[8] = @@ -573,7 +574,7 @@ static void atom_op_calltable(atom_exec_context *ctx, int *ptr, int arg) else SDEBUG(" table: %d\n", idx); if (U16(ctx->ctx->cmd_table + 4 + 2 * idx)) - atom_execute_table(ctx->ctx, idx, ctx->ps + ctx->ps_shift); + atom_execute_table_locked(ctx->ctx, idx, ctx->ps + ctx->ps_shift); } static void atom_op_clear(atom_exec_context *ctx, int *ptr, int arg) @@ -1040,7 +1041,7 @@ static struct { atom_op_shr, ATOM_ARG_MC}, { atom_op_debug, 0},}; -void atom_execute_table(struct atom_context *ctx, int index, uint32_t * params) +static void atom_execute_table_locked(struct atom_context *ctx, int index, uint32_t * params) { int base = CU16(ctx->cmd_table + 4 + 2 * index); int len, ws, ps, ptr; @@ -1092,6 +1093,13 @@ void atom_execute_table(struct atom_context *ctx, int index, uint32_t * params) kfree(ectx.ws); } +void atom_execute_table(struct atom_context *ctx, int index, uint32_t * params) +{ + mutex_lock(&ctx->mutex); + atom_execute_table_locked(ctx, index, params); + mutex_unlock(&ctx->mutex); +} + static int atom_iio_len[] = { 1, 2, 3, 3, 3, 3, 4, 4, 4, 3 }; static void atom_index_iio(struct atom_context *ctx, int base) diff --git a/drivers/gpu/drm/radeon/atom.h b/drivers/gpu/drm/radeon/atom.h index 6671848e5ea1..47fd943f6d14 100644 --- a/drivers/gpu/drm/radeon/atom.h +++ b/drivers/gpu/drm/radeon/atom.h @@ -120,6 +120,7 @@ struct card_info { struct atom_context { struct card_info *card; + struct mutex mutex; void *bios; uint32_t cmd_table, data_table; uint16_t *iio; diff --git a/drivers/gpu/drm/radeon/atombios.h b/drivers/gpu/drm/radeon/atombios.h index 5f48515c77a7..91ad0d1c1b17 100644 --- a/drivers/gpu/drm/radeon/atombios.h +++ b/drivers/gpu/drm/radeon/atombios.h @@ -4690,6 +4690,205 @@ typedef struct _ATOM_POWERPLAY_INFO_V3 { ATOM_POWERMODE_INFO_V3 asPowerPlayInfo[ATOM_MAX_NUMBEROF_POWER_BLOCK]; } ATOM_POWERPLAY_INFO_V3; +/* New PPlib */ +/**************************************************************************/ +typedef struct _ATOM_PPLIB_THERMALCONTROLLER + +{ + UCHAR ucType; // one of ATOM_PP_THERMALCONTROLLER_* + UCHAR ucI2cLine; // as interpreted by DAL I2C + UCHAR ucI2cAddress; + UCHAR ucFanParameters; // Fan Control Parameters. + UCHAR ucFanMinRPM; // Fan Minimum RPM (hundreds) -- for display purposes only. + UCHAR ucFanMaxRPM; // Fan Maximum RPM (hundreds) -- for display purposes only. + UCHAR ucReserved; // ---- + UCHAR ucFlags; // to be defined +} ATOM_PPLIB_THERMALCONTROLLER; + +#define ATOM_PP_FANPARAMETERS_TACHOMETER_PULSES_PER_REVOLUTION_MASK 0x0f +#define ATOM_PP_FANPARAMETERS_NOFAN 0x80 // No fan is connected to this controller. + +#define ATOM_PP_THERMALCONTROLLER_NONE 0 +#define ATOM_PP_THERMALCONTROLLER_LM63 1 // Not used by PPLib +#define ATOM_PP_THERMALCONTROLLER_ADM1032 2 // Not used by PPLib +#define ATOM_PP_THERMALCONTROLLER_ADM1030 3 // Not used by PPLib +#define ATOM_PP_THERMALCONTROLLER_MUA6649 4 // Not used by PPLib +#define ATOM_PP_THERMALCONTROLLER_LM64 5 +#define ATOM_PP_THERMALCONTROLLER_F75375 6 // Not used by PPLib +#define ATOM_PP_THERMALCONTROLLER_RV6xx 7 +#define ATOM_PP_THERMALCONTROLLER_RV770 8 +#define ATOM_PP_THERMALCONTROLLER_ADT7473 9 + +typedef struct _ATOM_PPLIB_STATE +{ + UCHAR ucNonClockStateIndex; + UCHAR ucClockStateIndices[1]; // variable-sized +} ATOM_PPLIB_STATE; + +//// ATOM_PPLIB_POWERPLAYTABLE::ulPlatformCaps +#define ATOM_PP_PLATFORM_CAP_BACKBIAS 1 +#define ATOM_PP_PLATFORM_CAP_POWERPLAY 2 +#define ATOM_PP_PLATFORM_CAP_SBIOSPOWERSOURCE 4 +#define ATOM_PP_PLATFORM_CAP_ASPM_L0s 8 +#define ATOM_PP_PLATFORM_CAP_ASPM_L1 16 +#define ATOM_PP_PLATFORM_CAP_HARDWAREDC 32 +#define ATOM_PP_PLATFORM_CAP_GEMINIPRIMARY 64 +#define ATOM_PP_PLATFORM_CAP_STEPVDDC 128 +#define ATOM_PP_PLATFORM_CAP_VOLTAGECONTROL 256 +#define ATOM_PP_PLATFORM_CAP_SIDEPORTCONTROL 512 +#define ATOM_PP_PLATFORM_CAP_TURNOFFPLL_ASPML1 1024 +#define ATOM_PP_PLATFORM_CAP_HTLINKCONTROL 2048 + +typedef struct _ATOM_PPLIB_POWERPLAYTABLE +{ + ATOM_COMMON_TABLE_HEADER sHeader; + + UCHAR ucDataRevision; + + UCHAR ucNumStates; + UCHAR ucStateEntrySize; + UCHAR ucClockInfoSize; + UCHAR ucNonClockSize; + + // offset from start of this table to array of ucNumStates ATOM_PPLIB_STATE structures + USHORT usStateArrayOffset; + + // offset from start of this table to array of ASIC-specific structures, + // currently ATOM_PPLIB_CLOCK_INFO. + USHORT usClockInfoArrayOffset; + + // offset from start of this table to array of ATOM_PPLIB_NONCLOCK_INFO + USHORT usNonClockInfoArrayOffset; + + USHORT usBackbiasTime; // in microseconds + USHORT usVoltageTime; // in microseconds + USHORT usTableSize; //the size of this structure, or the extended structure + + ULONG ulPlatformCaps; // See ATOM_PPLIB_CAPS_* + + ATOM_PPLIB_THERMALCONTROLLER sThermalController; + + USHORT usBootClockInfoOffset; + USHORT usBootNonClockInfoOffset; + +} ATOM_PPLIB_POWERPLAYTABLE; + +//// ATOM_PPLIB_NONCLOCK_INFO::usClassification +#define ATOM_PPLIB_CLASSIFICATION_UI_MASK 0x0007 +#define ATOM_PPLIB_CLASSIFICATION_UI_SHIFT 0 +#define ATOM_PPLIB_CLASSIFICATION_UI_NONE 0 +#define ATOM_PPLIB_CLASSIFICATION_UI_BATTERY 1 +#define ATOM_PPLIB_CLASSIFICATION_UI_BALANCED 3 +#define ATOM_PPLIB_CLASSIFICATION_UI_PERFORMANCE 5 +// 2, 4, 6, 7 are reserved + +#define ATOM_PPLIB_CLASSIFICATION_BOOT 0x0008 +#define ATOM_PPLIB_CLASSIFICATION_THERMAL 0x0010 +#define ATOM_PPLIB_CLASSIFICATION_LIMITEDPOWERSOURCE 0x0020 +#define ATOM_PPLIB_CLASSIFICATION_REST 0x0040 +#define ATOM_PPLIB_CLASSIFICATION_FORCED 0x0080 +#define ATOM_PPLIB_CLASSIFICATION_3DPERFORMANCE 0x0100 +#define ATOM_PPLIB_CLASSIFICATION_OVERDRIVETEMPLATE 0x0200 +#define ATOM_PPLIB_CLASSIFICATION_UVDSTATE 0x0400 +#define ATOM_PPLIB_CLASSIFICATION_3DLOW 0x0800 +#define ATOM_PPLIB_CLASSIFICATION_ACPI 0x1000 +// remaining 3 bits are reserved + +//// ATOM_PPLIB_NONCLOCK_INFO::ulCapsAndSettings +#define ATOM_PPLIB_SINGLE_DISPLAY_ONLY 0x00000001 +#define ATOM_PPLIB_SUPPORTS_VIDEO_PLAYBACK 0x00000002 + +// 0 is 2.5Gb/s, 1 is 5Gb/s +#define ATOM_PPLIB_PCIE_LINK_SPEED_MASK 0x00000004 +#define ATOM_PPLIB_PCIE_LINK_SPEED_SHIFT 2 + +// lanes - 1: 1, 2, 4, 8, 12, 16 permitted by PCIE spec +#define ATOM_PPLIB_PCIE_LINK_WIDTH_MASK 0x000000F8 +#define ATOM_PPLIB_PCIE_LINK_WIDTH_SHIFT 3 + +// lookup into reduced refresh-rate table +#define ATOM_PPLIB_LIMITED_REFRESHRATE_VALUE_MASK 0x00000F00 +#define ATOM_PPLIB_LIMITED_REFRESHRATE_VALUE_SHIFT 8 + +#define ATOM_PPLIB_LIMITED_REFRESHRATE_UNLIMITED 0 +#define ATOM_PPLIB_LIMITED_REFRESHRATE_50HZ 1 +// 2-15 TBD as needed. + +#define ATOM_PPLIB_SOFTWARE_DISABLE_LOADBALANCING 0x00001000 +#define ATOM_PPLIB_SOFTWARE_ENABLE_SLEEP_FOR_TIMESTAMPS 0x00002000 +#define ATOM_PPLIB_ENABLE_VARIBRIGHT 0x00008000 + +#define ATOM_PPLIB_DISALLOW_ON_DC 0x00004000 + +// Contained in an array starting at the offset +// in ATOM_PPLIB_POWERPLAYTABLE::usNonClockInfoArrayOffset. +// referenced from ATOM_PPLIB_STATE_INFO::ucNonClockStateIndex +typedef struct _ATOM_PPLIB_NONCLOCK_INFO +{ + USHORT usClassification; + UCHAR ucMinTemperature; + UCHAR ucMaxTemperature; + ULONG ulCapsAndSettings; + UCHAR ucRequiredPower; + UCHAR ucUnused1[3]; +} ATOM_PPLIB_NONCLOCK_INFO; + +// Contained in an array starting at the offset +// in ATOM_PPLIB_POWERPLAYTABLE::usClockInfoArrayOffset. +// referenced from ATOM_PPLIB_STATE::ucClockStateIndices +typedef struct _ATOM_PPLIB_R600_CLOCK_INFO +{ + USHORT usEngineClockLow; + UCHAR ucEngineClockHigh; + + USHORT usMemoryClockLow; + UCHAR ucMemoryClockHigh; + + USHORT usVDDC; + USHORT usUnused1; + USHORT usUnused2; + + ULONG ulFlags; // ATOM_PPLIB_R600_FLAGS_* + +} ATOM_PPLIB_R600_CLOCK_INFO; + +// ulFlags in ATOM_PPLIB_R600_CLOCK_INFO +#define ATOM_PPLIB_R600_FLAGS_PCIEGEN2 1 +#define ATOM_PPLIB_R600_FLAGS_UVDSAFE 2 +#define ATOM_PPLIB_R600_FLAGS_BACKBIASENABLE 4 +#define ATOM_PPLIB_R600_FLAGS_MEMORY_ODT_OFF 8 +#define ATOM_PPLIB_R600_FLAGS_MEMORY_DLL_OFF 16 + +typedef struct _ATOM_PPLIB_RS780_CLOCK_INFO + +{ + USHORT usLowEngineClockLow; // Low Engine clock in MHz (the same way as on the R600). + UCHAR ucLowEngineClockHigh; + USHORT usHighEngineClockLow; // High Engine clock in MHz. + UCHAR ucHighEngineClockHigh; + USHORT usMemoryClockLow; // For now one of the ATOM_PPLIB_RS780_SPMCLK_XXXX constants. + UCHAR ucMemoryClockHigh; // Currentyl unused. + UCHAR ucPadding; // For proper alignment and size. + USHORT usVDDC; // For the 780, use: None, Low, High, Variable + UCHAR ucMaxHTLinkWidth; // From SBIOS - {2, 4, 8, 16} + UCHAR ucMinHTLinkWidth; // From SBIOS - {2, 4, 8, 16}. Effective only if CDLW enabled. Minimum down stream width could be bigger as display BW requriement. + USHORT usHTLinkFreq; // See definition ATOM_PPLIB_RS780_HTLINKFREQ_xxx or in MHz(>=200). + ULONG ulFlags; +} ATOM_PPLIB_RS780_CLOCK_INFO; + +#define ATOM_PPLIB_RS780_VOLTAGE_NONE 0 +#define ATOM_PPLIB_RS780_VOLTAGE_LOW 1 +#define ATOM_PPLIB_RS780_VOLTAGE_HIGH 2 +#define ATOM_PPLIB_RS780_VOLTAGE_VARIABLE 3 + +#define ATOM_PPLIB_RS780_SPMCLK_NONE 0 // We cannot change the side port memory clock, leave it as it is. +#define ATOM_PPLIB_RS780_SPMCLK_LOW 1 +#define ATOM_PPLIB_RS780_SPMCLK_HIGH 2 + +#define ATOM_PPLIB_RS780_HTLINKFREQ_NONE 0 +#define ATOM_PPLIB_RS780_HTLINKFREQ_LOW 1 +#define ATOM_PPLIB_RS780_HTLINKFREQ_HIGH 2 + /**************************************************************************/ /* Following definitions are for compatiblity issue in different SW components. */ diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c index 84e5df766d3f..71727460968f 100644 --- a/drivers/gpu/drm/radeon/r100.c +++ b/drivers/gpu/drm/radeon/r100.c @@ -2881,6 +2881,10 @@ int r100_cs_track_check(struct radeon_device *rdev, struct r100_cs_track *track) for (i = 0; i < track->num_cb; i++) { if (track->cb[i].robj == NULL) { + if (!(track->fastfill || track->color_channel_mask || + track->blend_read_enable)) { + continue; + } DRM_ERROR("[drm] No buffer for color buffer %d !\n", i); return -EINVAL; } diff --git a/drivers/gpu/drm/radeon/r100_track.h b/drivers/gpu/drm/radeon/r100_track.h index 7188c3778ee2..b27a6999d219 100644 --- a/drivers/gpu/drm/radeon/r100_track.h +++ b/drivers/gpu/drm/radeon/r100_track.h @@ -67,13 +67,15 @@ struct r100_cs_track { unsigned immd_dwords; unsigned num_arrays; unsigned max_indx; + unsigned color_channel_mask; struct r100_cs_track_array arrays[11]; struct r100_cs_track_cb cb[R300_MAX_CB]; struct r100_cs_track_cb zb; struct r100_cs_track_texture textures[R300_TRACK_MAX_TEXTURE]; bool z_enabled; bool separate_cube; - + bool fastfill; + bool blend_read_enable; }; int r100_cs_track_check(struct radeon_device *rdev, struct r100_cs_track *track); diff --git a/drivers/gpu/drm/radeon/r300.c b/drivers/gpu/drm/radeon/r300.c index 83490c2b5061..3f2cc9e2e8d9 100644 --- a/drivers/gpu/drm/radeon/r300.c +++ b/drivers/gpu/drm/radeon/r300.c @@ -887,6 +887,14 @@ static int r300_packet0_check(struct radeon_cs_parser *p, track->textures[i].cpp = 1; track->textures[i].compress_format = R100_TRACK_COMP_DXT1; break; + case R300_TX_FORMAT_ATI2N: + if (p->rdev->family < CHIP_R420) { + DRM_ERROR("Invalid texture format %u\n", + (idx_value & 0x1F)); + return -EINVAL; + } + /* The same rules apply as for DXT3/5. */ + /* Pass through. */ case R300_TX_FORMAT_DXT3: case R300_TX_FORMAT_DXT5: track->textures[i].cpp = 1; @@ -951,6 +959,16 @@ static int r300_packet0_check(struct radeon_cs_parser *p, track->textures[i].width_11 = tmp; tmp = ((idx_value >> 16) & 1) << 11; track->textures[i].height_11 = tmp; + + /* ATI1N */ + if (idx_value & (1 << 14)) { + /* The same rules apply as for DXT1. */ + track->textures[i].compress_format = + R100_TRACK_COMP_DXT1; + } + } else if (idx_value & (1 << 14)) { + DRM_ERROR("Forbidden bit TXFORMAT_MSB\n"); + return -EINVAL; } break; case 0x4480: @@ -992,6 +1010,18 @@ static int r300_packet0_check(struct radeon_cs_parser *p, } ib[idx] = idx_value + ((u32)reloc->lobj.gpu_offset); break; + case 0x4e0c: + /* RB3D_COLOR_CHANNEL_MASK */ + track->color_channel_mask = idx_value; + break; + case 0x4d1c: + /* ZB_BW_CNTL */ + track->fastfill = !!(idx_value & (1 << 2)); + break; + case 0x4e04: + /* RB3D_BLENDCNTL */ + track->blend_read_enable = !!(idx_value & (1 << 2)); + break; case 0x4be8: /* valid register only on RV530 */ if (p->rdev->family == CHIP_RV530) diff --git a/drivers/gpu/drm/radeon/r300_cmdbuf.c b/drivers/gpu/drm/radeon/r300_cmdbuf.c index cb2e470f97d4..34bffa0e4b73 100644 --- a/drivers/gpu/drm/radeon/r300_cmdbuf.c +++ b/drivers/gpu/drm/radeon/r300_cmdbuf.c @@ -990,7 +990,7 @@ static inline int r300_emit_r500fp(drm_radeon_private_t *dev_priv, int sz; int addr; int type; - int clamp; + int isclamp; int stride; RING_LOCALS; @@ -999,10 +999,10 @@ static inline int r300_emit_r500fp(drm_radeon_private_t *dev_priv, addr = ((header.r500fp.adrhi_flags & 1) << 8) | header.r500fp.adrlo; type = !!(header.r500fp.adrhi_flags & R500FP_CONSTANT_TYPE); - clamp = !!(header.r500fp.adrhi_flags & R500FP_CONSTANT_CLAMP); + isclamp = !!(header.r500fp.adrhi_flags & R500FP_CONSTANT_CLAMP); addr |= (type << 16); - addr |= (clamp << 17); + addr |= (isclamp << 17); stride = type ? 4 : 6; diff --git a/drivers/gpu/drm/radeon/r300_reg.h b/drivers/gpu/drm/radeon/r300_reg.h index 4b7afef35a65..1735a2b69580 100644 --- a/drivers/gpu/drm/radeon/r300_reg.h +++ b/drivers/gpu/drm/radeon/r300_reg.h @@ -900,6 +900,7 @@ # define R300_TX_FORMAT_FL_I32 0x1B # define R300_TX_FORMAT_FL_I32A32 0x1C # define R300_TX_FORMAT_FL_R32G32B32A32 0x1D +# define R300_TX_FORMAT_ATI2N 0x1F /* alpha modes, convenience mostly */ /* if you have alpha, pick constant appropriate to the number of channels (1 for I8, 2 for I8A8, 4 for R8G8B8A8, etc */ diff --git a/drivers/gpu/drm/radeon/r600_cs.c b/drivers/gpu/drm/radeon/r600_cs.c index 0d820764f340..44060b92d9e6 100644 --- a/drivers/gpu/drm/radeon/r600_cs.c +++ b/drivers/gpu/drm/radeon/r600_cs.c @@ -170,7 +170,7 @@ static int r600_cs_packet_next_reloc_nomm(struct radeon_cs_parser *p, idx, relocs_chunk->length_dw); return -EINVAL; } - *cs_reloc = &p->relocs[0]; + *cs_reloc = p->relocs; (*cs_reloc)->lobj.gpu_offset = (u64)relocs_chunk->kdata[idx + 3] << 32; (*cs_reloc)->lobj.gpu_offset |= relocs_chunk->kdata[idx + 0]; return 0; @@ -717,7 +717,7 @@ static int r600_cs_parser_relocs_legacy(struct radeon_cs_parser *p) if (p->chunk_relocs_idx == -1) { return 0; } - p->relocs = kcalloc(1, sizeof(struct radeon_cs_reloc), GFP_KERNEL); + p->relocs = kzalloc(sizeof(struct radeon_cs_reloc), GFP_KERNEL); if (p->relocs == NULL) { return -ENOMEM; } diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index cd650fd3964e..53b55608102b 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -162,6 +162,7 @@ struct radeon_fence_driver { struct list_head created; struct list_head emited; struct list_head signaled; + bool initialized; }; struct radeon_fence { @@ -202,8 +203,9 @@ struct radeon_surface_reg { struct radeon_mman { struct ttm_bo_global_ref bo_global_ref; struct ttm_global_reference mem_global_ref; - bool mem_global_referenced; struct ttm_bo_device bdev; + bool mem_global_referenced; + bool initialized; }; struct radeon_bo { diff --git a/drivers/gpu/drm/radeon/radeon_asic.h b/drivers/gpu/drm/radeon/radeon_asic.h index 636116bedcb4..eb29217bbf1d 100644 --- a/drivers/gpu/drm/radeon/radeon_asic.h +++ b/drivers/gpu/drm/radeon/radeon_asic.h @@ -33,6 +33,7 @@ */ uint32_t radeon_legacy_get_engine_clock(struct radeon_device *rdev); void radeon_legacy_set_engine_clock(struct radeon_device *rdev, uint32_t eng_clock); +uint32_t radeon_legacy_get_memory_clock(struct radeon_device *rdev); void radeon_legacy_set_clock_gating(struct radeon_device *rdev, int enable); uint32_t radeon_atom_get_engine_clock(struct radeon_device *rdev); @@ -106,7 +107,7 @@ static struct radeon_asic r100_asic = { .copy = &r100_copy_blit, .get_engine_clock = &radeon_legacy_get_engine_clock, .set_engine_clock = &radeon_legacy_set_engine_clock, - .get_memory_clock = NULL, + .get_memory_clock = &radeon_legacy_get_memory_clock, .set_memory_clock = NULL, .set_pcie_lanes = NULL, .set_clock_gating = &radeon_legacy_set_clock_gating, @@ -166,7 +167,7 @@ static struct radeon_asic r300_asic = { .copy = &r100_copy_blit, .get_engine_clock = &radeon_legacy_get_engine_clock, .set_engine_clock = &radeon_legacy_set_engine_clock, - .get_memory_clock = NULL, + .get_memory_clock = &radeon_legacy_get_memory_clock, .set_memory_clock = NULL, .set_pcie_lanes = &rv370_set_pcie_lanes, .set_clock_gating = &radeon_legacy_set_clock_gating, @@ -259,7 +260,7 @@ static struct radeon_asic rs400_asic = { .copy = &r100_copy_blit, .get_engine_clock = &radeon_legacy_get_engine_clock, .set_engine_clock = &radeon_legacy_set_engine_clock, - .get_memory_clock = NULL, + .get_memory_clock = &radeon_legacy_get_memory_clock, .set_memory_clock = NULL, .set_pcie_lanes = NULL, .set_clock_gating = &radeon_legacy_set_clock_gating, diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c index 12a0c760e7ff..321044bef71c 100644 --- a/drivers/gpu/drm/radeon/radeon_atombios.c +++ b/drivers/gpu/drm/radeon/radeon_atombios.c @@ -745,8 +745,7 @@ bool radeon_get_atom_connector_info_from_supported_devices_table(struct else radeon_add_legacy_encoder(dev, radeon_get_encoder_id(dev, - (1 << - i), + (1 << i), dac), (1 << i)); } @@ -758,32 +757,30 @@ bool radeon_get_atom_connector_info_from_supported_devices_table(struct if (bios_connectors[j].valid && (i != j)) { if (bios_connectors[i].line_mux == bios_connectors[j].line_mux) { - if (((bios_connectors[i]. - devices & - (ATOM_DEVICE_DFP_SUPPORT)) - && (bios_connectors[j]. - devices & - (ATOM_DEVICE_CRT_SUPPORT))) - || - ((bios_connectors[j]. - devices & - (ATOM_DEVICE_DFP_SUPPORT)) - && (bios_connectors[i]. - devices & - (ATOM_DEVICE_CRT_SUPPORT)))) { - bios_connectors[i]. - devices |= - bios_connectors[j]. - devices; - bios_connectors[i]. - connector_type = - DRM_MODE_CONNECTOR_DVII; - if (bios_connectors[j].devices & - (ATOM_DEVICE_DFP_SUPPORT)) + /* make sure not to combine LVDS */ + if (bios_connectors[i].devices & (ATOM_DEVICE_LCD_SUPPORT)) { + bios_connectors[i].line_mux = 53; + bios_connectors[i].ddc_bus.valid = false; + continue; + } + if (bios_connectors[j].devices & (ATOM_DEVICE_LCD_SUPPORT)) { + bios_connectors[j].line_mux = 53; + bios_connectors[j].ddc_bus.valid = false; + continue; + } + /* combine analog and digital for DVI-I */ + if (((bios_connectors[i].devices & (ATOM_DEVICE_DFP_SUPPORT)) && + (bios_connectors[j].devices & (ATOM_DEVICE_CRT_SUPPORT))) || + ((bios_connectors[j].devices & (ATOM_DEVICE_DFP_SUPPORT)) && + (bios_connectors[i].devices & (ATOM_DEVICE_CRT_SUPPORT)))) { + bios_connectors[i].devices |= + bios_connectors[j].devices; + bios_connectors[i].connector_type = + DRM_MODE_CONNECTOR_DVII; + if (bios_connectors[j].devices & (ATOM_DEVICE_DFP_SUPPORT)) bios_connectors[i].hpd = bios_connectors[j].hpd; - bios_connectors[j]. - valid = false; + bios_connectors[j].valid = false; } } } @@ -1234,6 +1231,61 @@ bool radeon_atom_get_tv_timings(struct radeon_device *rdev, int index, return true; } +enum radeon_tv_std +radeon_atombios_get_tv_info(struct radeon_device *rdev) +{ + struct radeon_mode_info *mode_info = &rdev->mode_info; + int index = GetIndexIntoMasterTable(DATA, AnalogTV_Info); + uint16_t data_offset; + uint8_t frev, crev; + struct _ATOM_ANALOG_TV_INFO *tv_info; + enum radeon_tv_std tv_std = TV_STD_NTSC; + + atom_parse_data_header(mode_info->atom_context, index, NULL, &frev, &crev, &data_offset); + + tv_info = (struct _ATOM_ANALOG_TV_INFO *)(mode_info->atom_context->bios + data_offset); + + switch (tv_info->ucTV_BootUpDefaultStandard) { + case ATOM_TV_NTSC: + tv_std = TV_STD_NTSC; + DRM_INFO("Default TV standard: NTSC\n"); + break; + case ATOM_TV_NTSCJ: + tv_std = TV_STD_NTSC_J; + DRM_INFO("Default TV standard: NTSC-J\n"); + break; + case ATOM_TV_PAL: + tv_std = TV_STD_PAL; + DRM_INFO("Default TV standard: PAL\n"); + break; + case ATOM_TV_PALM: + tv_std = TV_STD_PAL_M; + DRM_INFO("Default TV standard: PAL-M\n"); + break; + case ATOM_TV_PALN: + tv_std = TV_STD_PAL_N; + DRM_INFO("Default TV standard: PAL-N\n"); + break; + case ATOM_TV_PALCN: + tv_std = TV_STD_PAL_CN; + DRM_INFO("Default TV standard: PAL-CN\n"); + break; + case ATOM_TV_PAL60: + tv_std = TV_STD_PAL_60; + DRM_INFO("Default TV standard: PAL-60\n"); + break; + case ATOM_TV_SECAM: + tv_std = TV_STD_SECAM; + DRM_INFO("Default TV standard: SECAM\n"); + break; + default: + tv_std = TV_STD_NTSC; + DRM_INFO("Unknown TV standard; defaulting to NTSC\n"); + break; + } + return tv_std; +} + struct radeon_encoder_tv_dac * radeon_atombios_get_tv_dac_info(struct radeon_encoder *encoder) { @@ -1269,6 +1321,7 @@ radeon_atombios_get_tv_dac_info(struct radeon_encoder *encoder) dac = dac_info->ucDAC2_NTSC_DAC_Adjustment; tv_dac->ntsc_tvdac_adj = (bg << 16) | (dac << 20); + tv_dac->tv_std = radeon_atombios_get_tv_info(rdev); } return tv_dac; } diff --git a/drivers/gpu/drm/radeon/radeon_clocks.c b/drivers/gpu/drm/radeon/radeon_clocks.c index b062109efbee..812f24dbc2a8 100644 --- a/drivers/gpu/drm/radeon/radeon_clocks.c +++ b/drivers/gpu/drm/radeon/radeon_clocks.c @@ -62,7 +62,7 @@ uint32_t radeon_legacy_get_engine_clock(struct radeon_device *rdev) } /* 10 khz */ -static uint32_t radeon_legacy_get_memory_clock(struct radeon_device *rdev) +uint32_t radeon_legacy_get_memory_clock(struct radeon_device *rdev) { struct radeon_pll *mpll = &rdev->clock.mpll; uint32_t fb_div, ref_div, post_div, mclk; diff --git a/drivers/gpu/drm/radeon/radeon_combios.c b/drivers/gpu/drm/radeon/radeon_combios.c index c5021a3445de..fd94dbca33ac 100644 --- a/drivers/gpu/drm/radeon/radeon_combios.c +++ b/drivers/gpu/drm/radeon/radeon_combios.c @@ -634,11 +634,10 @@ struct radeon_encoder_primary_dac *radeon_combios_get_primary_dac_info(struct return p_dac; } -static enum radeon_tv_std -radeon_combios_get_tv_info(struct radeon_encoder *encoder) +enum radeon_tv_std +radeon_combios_get_tv_info(struct radeon_device *rdev) { - struct drm_device *dev = encoder->base.dev; - struct radeon_device *rdev = dev->dev_private; + struct drm_device *dev = rdev->ddev; uint16_t tv_info; enum radeon_tv_std tv_std = TV_STD_NTSC; @@ -779,7 +778,7 @@ struct radeon_encoder_tv_dac *radeon_combios_get_tv_dac_info(struct tv_dac->ntsc_tvdac_adj = (bg << 16) | (dac << 20); found = 1; } - tv_dac->tv_std = radeon_combios_get_tv_info(encoder); + tv_dac->tv_std = radeon_combios_get_tv_info(rdev); } if (!found) { /* then check CRT table */ diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c index 5eece186e03c..20161567dbff 100644 --- a/drivers/gpu/drm/radeon/radeon_connectors.c +++ b/drivers/gpu/drm/radeon/radeon_connectors.c @@ -208,6 +208,18 @@ static struct drm_display_mode *radeon_fp_native_mode(struct drm_encoder *encode drm_mode_set_name(mode); DRM_DEBUG("Adding native panel mode %s\n", mode->name); + } else if (native_mode->hdisplay != 0 && + native_mode->vdisplay != 0) { + /* mac laptops without an edid */ + /* Note that this is not necessarily the exact panel mode, + * but an approximation based on the cvt formula. For these + * systems we should ideally read the mode info out of the + * registers or add a mode table, but this works and is much + * simpler. + */ + mode = drm_cvt_mode(dev, native_mode->hdisplay, native_mode->vdisplay, 60, true, false, false); + mode->type = DRM_MODE_TYPE_PREFERRED | DRM_MODE_TYPE_DRIVER; + DRM_DEBUG("Adding cvt approximation of native panel mode %s\n", mode->name); } return mode; } @@ -1171,7 +1183,7 @@ radeon_add_atom_connector(struct drm_device *dev, 1); drm_connector_attach_property(&radeon_connector->base, rdev->mode_info.tv_std_property, - 1); + radeon_atombios_get_tv_info(rdev)); } break; case DRM_MODE_CONNECTOR_LVDS: @@ -1315,7 +1327,7 @@ radeon_add_legacy_connector(struct drm_device *dev, 1); drm_connector_attach_property(&radeon_connector->base, rdev->mode_info.tv_std_property, - 1); + radeon_combios_get_tv_info(rdev)); } break; case DRM_MODE_CONNECTOR_LVDS: diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c index 02bcdb1240c0..7c6848096bcd 100644 --- a/drivers/gpu/drm/radeon/radeon_device.c +++ b/drivers/gpu/drm/radeon/radeon_device.c @@ -391,6 +391,12 @@ int radeon_asic_init(struct radeon_device *rdev) /* FIXME: not supported yet */ return -EINVAL; } + + if (rdev->flags & RADEON_IS_IGP) { + rdev->asic->get_memory_clock = NULL; + rdev->asic->set_memory_clock = NULL; + } + return 0; } @@ -481,6 +487,7 @@ int radeon_atombios_init(struct radeon_device *rdev) atom_card_info->pll_write = cail_pll_write; rdev->mode_info.atom_context = atom_parse(atom_card_info, rdev->bios); + mutex_init(&rdev->mode_info.atom_context->mutex); radeon_atom_initialize_bios_scratch_regs(rdev->ddev); atom_allocate_fb_scratch(rdev->mode_info.atom_context); return 0; @@ -539,9 +546,72 @@ void radeon_agp_disable(struct radeon_device *rdev) } } -/* - * Radeon device. - */ +void radeon_check_arguments(struct radeon_device *rdev) +{ + /* vramlimit must be a power of two */ + switch (radeon_vram_limit) { + case 0: + case 4: + case 8: + case 16: + case 32: + case 64: + case 128: + case 256: + case 512: + case 1024: + case 2048: + case 4096: + break; + default: + dev_warn(rdev->dev, "vram limit (%d) must be a power of 2\n", + radeon_vram_limit); + radeon_vram_limit = 0; + break; + } + radeon_vram_limit = radeon_vram_limit << 20; + /* gtt size must be power of two and greater or equal to 32M */ + switch (radeon_gart_size) { + case 4: + case 8: + case 16: + dev_warn(rdev->dev, "gart size (%d) too small forcing to 512M\n", + radeon_gart_size); + radeon_gart_size = 512; + break; + case 32: + case 64: + case 128: + case 256: + case 512: + case 1024: + case 2048: + case 4096: + break; + default: + dev_warn(rdev->dev, "gart size (%d) must be a power of 2\n", + radeon_gart_size); + radeon_gart_size = 512; + break; + } + rdev->mc.gtt_size = radeon_gart_size * 1024 * 1024; + /* AGP mode can only be -1, 1, 2, 4, 8 */ + switch (radeon_agpmode) { + case -1: + case 0: + case 1: + case 2: + case 4: + case 8: + break; + default: + dev_warn(rdev->dev, "invalid AGP mode %d (valid mode: " + "-1, 0, 1, 2, 4, 8)\n", radeon_agpmode); + radeon_agpmode = 0; + break; + } +} + int radeon_device_init(struct radeon_device *rdev, struct drm_device *ddev, struct pci_dev *pdev, @@ -580,9 +650,9 @@ int radeon_device_init(struct radeon_device *rdev, /* Set asic functions */ r = radeon_asic_init(rdev); - if (r) { + if (r) return r; - } + radeon_check_arguments(rdev); if (rdev->flags & RADEON_IS_AGP && radeon_agpmode == -1) { radeon_agp_disable(rdev); diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c index a133b833e45d..91d72b70abc9 100644 --- a/drivers/gpu/drm/radeon/radeon_display.c +++ b/drivers/gpu/drm/radeon/radeon_display.c @@ -739,7 +739,7 @@ static struct drm_prop_enum_list radeon_tv_std_enum_list[] = { TV_STD_SECAM, "secam" }, }; -int radeon_modeset_create_props(struct radeon_device *rdev) +static int radeon_modeset_create_props(struct radeon_device *rdev) { int i, sz; diff --git a/drivers/gpu/drm/radeon/radeon_drv.c b/drivers/gpu/drm/radeon/radeon_drv.c index dbd56ef82f9c..8ba3de7994d4 100644 --- a/drivers/gpu/drm/radeon/radeon_drv.c +++ b/drivers/gpu/drm/radeon/radeon_drv.c @@ -196,7 +196,7 @@ static struct drm_driver driver_old = { .owner = THIS_MODULE, .open = drm_open, .release = drm_release, - .ioctl = drm_ioctl, + .unlocked_ioctl = drm_ioctl, .mmap = drm_mmap, .poll = drm_poll, .fasync = drm_fasync, @@ -284,7 +284,7 @@ static struct drm_driver kms_driver = { .owner = THIS_MODULE, .open = drm_open, .release = drm_release, - .ioctl = drm_ioctl, + .unlocked_ioctl = drm_ioctl, .mmap = radeon_mmap, .poll = drm_poll, .fasync = drm_fasync, diff --git a/drivers/gpu/drm/radeon/radeon_encoders.c b/drivers/gpu/drm/radeon/radeon_encoders.c index 0d1d908e5225..ccba95f83d11 100644 --- a/drivers/gpu/drm/radeon/radeon_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_encoders.c @@ -233,6 +233,8 @@ static bool radeon_atom_mode_fixup(struct drm_encoder *encoder, if (!ASIC_IS_AVIVO(rdev)) { adjusted_mode->hdisplay = mode->hdisplay; adjusted_mode->vdisplay = mode->vdisplay; + adjusted_mode->crtc_hdisplay = mode->hdisplay; + adjusted_mode->crtc_vdisplay = mode->vdisplay; } adjusted_mode->base.id = mode_id; } @@ -495,9 +497,9 @@ atombios_digital_setup(struct drm_encoder *encoder, int action) args.v1.ucMisc |= PANEL_ENCODER_MISC_HDMI_TYPE; args.v1.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10); if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT)) { - if (dig->lvds_misc & (1 << 0)) + if (dig->lvds_misc & ATOM_PANEL_MISC_DUAL) args.v1.ucMisc |= PANEL_ENCODER_MISC_DUAL; - if (dig->lvds_misc & (1 << 1)) + if (dig->lvds_misc & ATOM_PANEL_MISC_888RGB) args.v1.ucMisc |= (1 << 1); } else { if (dig_connector->linkb) @@ -524,18 +526,18 @@ atombios_digital_setup(struct drm_encoder *encoder, int action) args.v2.ucTemporal = 0; args.v2.ucFRC = 0; if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT)) { - if (dig->lvds_misc & (1 << 0)) + if (dig->lvds_misc & ATOM_PANEL_MISC_DUAL) args.v2.ucMisc |= PANEL_ENCODER_MISC_DUAL; - if (dig->lvds_misc & (1 << 5)) { + if (dig->lvds_misc & ATOM_PANEL_MISC_SPATIAL) { args.v2.ucSpatial = PANEL_ENCODER_SPATIAL_DITHER_EN; - if (dig->lvds_misc & (1 << 1)) + if (dig->lvds_misc & ATOM_PANEL_MISC_888RGB) args.v2.ucSpatial |= PANEL_ENCODER_SPATIAL_DITHER_DEPTH; } - if (dig->lvds_misc & (1 << 6)) { + if (dig->lvds_misc & ATOM_PANEL_MISC_TEMPORAL) { args.v2.ucTemporal = PANEL_ENCODER_TEMPORAL_DITHER_EN; - if (dig->lvds_misc & (1 << 1)) + if (dig->lvds_misc & ATOM_PANEL_MISC_888RGB) args.v2.ucTemporal |= PANEL_ENCODER_TEMPORAL_DITHER_DEPTH; - if (((dig->lvds_misc >> 2) & 0x3) == 2) + if (((dig->lvds_misc >> ATOM_PANEL_MISC_GREY_LEVEL_SHIFT) & 0x3) == 2) args.v2.ucTemporal |= PANEL_ENCODER_TEMPORAL_LEVEL_4; } } else { diff --git a/drivers/gpu/drm/radeon/radeon_fence.c b/drivers/gpu/drm/radeon/radeon_fence.c index cb4cd97ae39f..4cdd8b4f7549 100644 --- a/drivers/gpu/drm/radeon/radeon_fence.c +++ b/drivers/gpu/drm/radeon/radeon_fence.c @@ -324,7 +324,7 @@ int radeon_fence_driver_init(struct radeon_device *rdev) write_lock_irqsave(&rdev->fence_drv.lock, irq_flags); r = radeon_scratch_get(rdev, &rdev->fence_drv.scratch_reg); if (r) { - DRM_ERROR("Fence failed to get a scratch register."); + dev_err(rdev->dev, "fence failed to get scratch register\n"); write_unlock_irqrestore(&rdev->fence_drv.lock, irq_flags); return r; } @@ -335,9 +335,10 @@ int radeon_fence_driver_init(struct radeon_device *rdev) INIT_LIST_HEAD(&rdev->fence_drv.signaled); rdev->fence_drv.count_timeout = 0; init_waitqueue_head(&rdev->fence_drv.queue); + rdev->fence_drv.initialized = true; write_unlock_irqrestore(&rdev->fence_drv.lock, irq_flags); if (radeon_debugfs_fence_init(rdev)) { - DRM_ERROR("Failed to register debugfs file for fence !\n"); + dev_err(rdev->dev, "fence debugfs file creation failed\n"); } return 0; } @@ -346,11 +347,13 @@ void radeon_fence_driver_fini(struct radeon_device *rdev) { unsigned long irq_flags; + if (!rdev->fence_drv.initialized) + return; wake_up_all(&rdev->fence_drv.queue); write_lock_irqsave(&rdev->fence_drv.lock, irq_flags); radeon_scratch_free(rdev, rdev->fence_drv.scratch_reg); write_unlock_irqrestore(&rdev->fence_drv.lock, irq_flags); - DRM_INFO("radeon: fence finalized\n"); + rdev->fence_drv.initialized = false; } diff --git a/drivers/gpu/drm/radeon/radeon_ioc32.c b/drivers/gpu/drm/radeon/radeon_ioc32.c index a1bf11de308a..48b7cea31e08 100644 --- a/drivers/gpu/drm/radeon/radeon_ioc32.c +++ b/drivers/gpu/drm/radeon/radeon_ioc32.c @@ -92,8 +92,7 @@ static int compat_radeon_cp_init(struct file *file, unsigned int cmd, &init->gart_textures_offset)) return -EFAULT; - return drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_RADEON_CP_INIT, (unsigned long)init); + return drm_ioctl(file, DRM_IOCTL_RADEON_CP_INIT, (unsigned long)init); } typedef struct drm_radeon_clear32 { @@ -125,8 +124,7 @@ static int compat_radeon_cp_clear(struct file *file, unsigned int cmd, &clr->depth_boxes)) return -EFAULT; - return drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_RADEON_CLEAR, (unsigned long)clr); + return drm_ioctl(file, DRM_IOCTL_RADEON_CLEAR, (unsigned long)clr); } typedef struct drm_radeon_stipple32 { @@ -149,8 +147,7 @@ static int compat_radeon_cp_stipple(struct file *file, unsigned int cmd, &request->mask)) return -EFAULT; - return drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_RADEON_STIPPLE, (unsigned long)request); + return drm_ioctl(file, DRM_IOCTL_RADEON_STIPPLE, (unsigned long)request); } typedef struct drm_radeon_tex_image32 { @@ -204,8 +201,7 @@ static int compat_radeon_cp_texture(struct file *file, unsigned int cmd, &image->data)) return -EFAULT; - return drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_RADEON_TEXTURE, (unsigned long)request); + return drm_ioctl(file, DRM_IOCTL_RADEON_TEXTURE, (unsigned long)request); } typedef struct drm_radeon_vertex2_32 { @@ -238,8 +234,7 @@ static int compat_radeon_cp_vertex2(struct file *file, unsigned int cmd, &request->prim)) return -EFAULT; - return drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_RADEON_VERTEX2, (unsigned long)request); + return drm_ioctl(file, DRM_IOCTL_RADEON_VERTEX2, (unsigned long)request); } typedef struct drm_radeon_cmd_buffer32 { @@ -268,8 +263,7 @@ static int compat_radeon_cp_cmdbuf(struct file *file, unsigned int cmd, &request->boxes)) return -EFAULT; - return drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_RADEON_CMDBUF, (unsigned long)request); + return drm_ioctl(file, DRM_IOCTL_RADEON_CMDBUF, (unsigned long)request); } typedef struct drm_radeon_getparam32 { @@ -293,8 +287,7 @@ static int compat_radeon_cp_getparam(struct file *file, unsigned int cmd, &request->value)) return -EFAULT; - return drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_RADEON_GETPARAM, (unsigned long)request); + return drm_ioctl(file, DRM_IOCTL_RADEON_GETPARAM, (unsigned long)request); } typedef struct drm_radeon_mem_alloc32 { @@ -322,8 +315,7 @@ static int compat_radeon_mem_alloc(struct file *file, unsigned int cmd, &request->region_offset)) return -EFAULT; - return drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_RADEON_ALLOC, (unsigned long)request); + return drm_ioctl(file, DRM_IOCTL_RADEON_ALLOC, (unsigned long)request); } typedef struct drm_radeon_irq_emit32 { @@ -345,8 +337,7 @@ static int compat_radeon_irq_emit(struct file *file, unsigned int cmd, &request->irq_seq)) return -EFAULT; - return drm_ioctl(file->f_path.dentry->d_inode, file, - DRM_IOCTL_RADEON_IRQ_EMIT, (unsigned long)request); + return drm_ioctl(file, DRM_IOCTL_RADEON_IRQ_EMIT, (unsigned long)request); } /* The two 64-bit arches where alignof(u64)==4 in 32-bit code */ @@ -372,8 +363,7 @@ static int compat_radeon_cp_setparam(struct file *file, unsigned int cmd, &request->value)) return -EFAULT; - return drm_ioctl(file->f_dentry->d_inode, file, - DRM_IOCTL_RADEON_SETPARAM, (unsigned long) request); + return drm_ioctl(file, DRM_IOCTL_RADEON_SETPARAM, (unsigned long) request); } #else #define compat_radeon_cp_setparam NULL @@ -413,12 +403,10 @@ long radeon_compat_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) if (nr < DRM_COMMAND_BASE + DRM_ARRAY_SIZE(radeon_compat_ioctls)) fn = radeon_compat_ioctls[nr - DRM_COMMAND_BASE]; - lock_kernel(); /* XXX for now */ if (fn != NULL) ret = (*fn) (filp, cmd, arg); else - ret = drm_ioctl(filp->f_path.dentry->d_inode, filp, cmd, arg); - unlock_kernel(); + ret = drm_ioctl(filp, cmd, arg); return ret; } @@ -431,9 +419,7 @@ long radeon_kms_compat_ioctl(struct file *filp, unsigned int cmd, unsigned long if (nr < DRM_COMMAND_BASE) return drm_compat_ioctl(filp, cmd, arg); - lock_kernel(); /* XXX for now */ - ret = drm_ioctl(filp->f_path.dentry->d_inode, filp, cmd, arg); - unlock_kernel(); + ret = drm_ioctl(filp, cmd, arg); return ret; } diff --git a/drivers/gpu/drm/radeon/radeon_legacy_crtc.c b/drivers/gpu/drm/radeon/radeon_legacy_crtc.c index b82ede98e152..cc27485a07ad 100644 --- a/drivers/gpu/drm/radeon/radeon_legacy_crtc.c +++ b/drivers/gpu/drm/radeon/radeon_legacy_crtc.c @@ -43,8 +43,7 @@ static void radeon_overscan_setup(struct drm_crtc *crtc, } static void radeon_legacy_rmx_mode_set(struct drm_crtc *crtc, - struct drm_display_mode *mode, - struct drm_display_mode *adjusted_mode) + struct drm_display_mode *mode) { struct drm_device *dev = crtc->dev; struct radeon_device *rdev = dev->dev_private; @@ -1059,7 +1058,7 @@ static int radeon_crtc_mode_set(struct drm_crtc *crtc, radeon_set_pll(crtc, adjusted_mode); radeon_overscan_setup(crtc, adjusted_mode); if (radeon_crtc->crtc_id == 0) { - radeon_legacy_rmx_mode_set(crtc, mode, adjusted_mode); + radeon_legacy_rmx_mode_set(crtc, adjusted_mode); } else { if (radeon_crtc->rmx_type != RMX_OFF) { /* FIXME: only first crtc has rmx what should we diff --git a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c index df00515e81fa..981508ff7037 100644 --- a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c @@ -207,6 +207,8 @@ static bool radeon_legacy_mode_fixup(struct drm_encoder *encoder, *adjusted_mode = *native_mode; adjusted_mode->hdisplay = mode->hdisplay; adjusted_mode->vdisplay = mode->vdisplay; + adjusted_mode->crtc_hdisplay = mode->hdisplay; + adjusted_mode->crtc_vdisplay = mode->vdisplay; adjusted_mode->base.id = mode_id; } diff --git a/drivers/gpu/drm/radeon/radeon_mode.h b/drivers/gpu/drm/radeon/radeon_mode.h index 3dcbe130c422..402369db5ba0 100644 --- a/drivers/gpu/drm/radeon/radeon_mode.h +++ b/drivers/gpu/drm/radeon/radeon_mode.h @@ -88,6 +88,7 @@ enum radeon_tv_std { TV_STD_SCART_PAL, TV_STD_SECAM, TV_STD_PAL_CN, + TV_STD_PAL_N, }; /* radeon gpio-based i2c @@ -395,6 +396,11 @@ struct radeon_framebuffer { struct drm_gem_object *obj; }; +extern enum radeon_tv_std +radeon_combios_get_tv_info(struct radeon_device *rdev); +extern enum radeon_tv_std +radeon_atombios_get_tv_info(struct radeon_device *rdev); + extern void radeon_connector_hotplug(struct drm_connector *connector); extern bool radeon_dp_needs_link_train(struct radeon_connector *radeon_connector); extern int radeon_dp_mode_valid_helper(struct radeon_connector *radeon_connector, diff --git a/drivers/gpu/drm/radeon/radeon_test.c b/drivers/gpu/drm/radeon/radeon_test.c index 391c973ec4db..9f5e2f929da9 100644 --- a/drivers/gpu/drm/radeon/radeon_test.c +++ b/drivers/gpu/drm/radeon/radeon_test.c @@ -42,8 +42,8 @@ void radeon_test_moves(struct radeon_device *rdev) /* Number of tests = * (Total GTT - IB pool - writeback page - ring buffer) / test size */ - n = (rdev->mc.gtt_size - RADEON_IB_POOL_SIZE*64*1024 - RADEON_GPU_PAGE_SIZE - - rdev->cp.ring_size) / size; + n = ((u32)(rdev->mc.gtt_size - RADEON_IB_POOL_SIZE*64*1024 - RADEON_GPU_PAGE_SIZE - + rdev->cp.ring_size)) / size; gtt_obj = kzalloc(n * sizeof(*gtt_obj), GFP_KERNEL); if (!gtt_obj) { diff --git a/drivers/gpu/drm/radeon/radeon_ttm.c b/drivers/gpu/drm/radeon/radeon_ttm.c index d7fd160cc671..3b0c07b444a2 100644 --- a/drivers/gpu/drm/radeon/radeon_ttm.c +++ b/drivers/gpu/drm/radeon/radeon_ttm.c @@ -494,6 +494,7 @@ int radeon_ttm_init(struct radeon_device *rdev) DRM_ERROR("failed initializing buffer object driver(%d).\n", r); return r; } + rdev->mman.initialized = true; r = ttm_bo_init_mm(&rdev->mman.bdev, TTM_PL_VRAM, rdev->mc.real_vram_size >> PAGE_SHIFT); if (r) { @@ -541,6 +542,8 @@ void radeon_ttm_fini(struct radeon_device *rdev) { int r; + if (!rdev->mman.initialized) + return; if (rdev->stollen_vga_memory) { r = radeon_bo_reserve(rdev->stollen_vga_memory, false); if (r == 0) { @@ -554,6 +557,7 @@ void radeon_ttm_fini(struct radeon_device *rdev) ttm_bo_device_release(&rdev->mman.bdev); radeon_gart_fini(rdev); radeon_ttm_global_fini(rdev); + rdev->mman.initialized = false; DRM_INFO("radeon: ttm finalized\n"); } diff --git a/drivers/gpu/drm/savage/savage_drv.c b/drivers/gpu/drm/savage/savage_drv.c index eee52aa92a7c..021de44c15ab 100644 --- a/drivers/gpu/drm/savage/savage_drv.c +++ b/drivers/gpu/drm/savage/savage_drv.c @@ -50,7 +50,7 @@ static struct drm_driver driver = { .owner = THIS_MODULE, .open = drm_open, .release = drm_release, - .ioctl = drm_ioctl, + .unlocked_ioctl = drm_ioctl, .mmap = drm_mmap, .poll = drm_poll, .fasync = drm_fasync, diff --git a/drivers/gpu/drm/sis/sis_drv.c b/drivers/gpu/drm/sis/sis_drv.c index e725cc0b1155..4fd1f067d380 100644 --- a/drivers/gpu/drm/sis/sis_drv.c +++ b/drivers/gpu/drm/sis/sis_drv.c @@ -80,7 +80,7 @@ static struct drm_driver driver = { .owner = THIS_MODULE, .open = drm_open, .release = drm_release, - .ioctl = drm_ioctl, + .unlocked_ioctl = drm_ioctl, .mmap = drm_mmap, .poll = drm_poll, .fasync = drm_fasync, diff --git a/drivers/gpu/drm/tdfx/tdfx_drv.c b/drivers/gpu/drm/tdfx/tdfx_drv.c index 012ff2e356b2..ec5a43e65722 100644 --- a/drivers/gpu/drm/tdfx/tdfx_drv.c +++ b/drivers/gpu/drm/tdfx/tdfx_drv.c @@ -48,7 +48,7 @@ static struct drm_driver driver = { .owner = THIS_MODULE, .open = drm_open, .release = drm_release, - .ioctl = drm_ioctl, + .unlocked_ioctl = drm_ioctl, .mmap = drm_mmap, .poll = drm_poll, .fasync = drm_fasync, diff --git a/drivers/gpu/drm/via/via_drv.c b/drivers/gpu/drm/via/via_drv.c index bc2f51843005..7a1b210401e0 100644 --- a/drivers/gpu/drm/via/via_drv.c +++ b/drivers/gpu/drm/via/via_drv.c @@ -58,7 +58,7 @@ static struct drm_driver driver = { .owner = THIS_MODULE, .open = drm_open, .release = drm_release, - .ioctl = drm_ioctl, + .unlocked_ioctl = drm_ioctl, .mmap = drm_mmap, .poll = drm_poll, .fasync = drm_fasync, diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c index 7b48bb3b63b2..1db1ef30be2b 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c @@ -103,37 +103,39 @@ */ static struct drm_ioctl_desc vmw_ioctls[] = { - VMW_IOCTL_DEF(DRM_IOCTL_VMW_GET_PARAM, vmw_getparam_ioctl, 0), + VMW_IOCTL_DEF(DRM_IOCTL_VMW_GET_PARAM, vmw_getparam_ioctl, + DRM_AUTH | DRM_UNLOCKED), VMW_IOCTL_DEF(DRM_IOCTL_VMW_ALLOC_DMABUF, vmw_dmabuf_alloc_ioctl, - 0), + DRM_AUTH | DRM_UNLOCKED), VMW_IOCTL_DEF(DRM_IOCTL_VMW_UNREF_DMABUF, vmw_dmabuf_unref_ioctl, - 0), + DRM_AUTH | DRM_UNLOCKED), VMW_IOCTL_DEF(DRM_IOCTL_VMW_CURSOR_BYPASS, - vmw_kms_cursor_bypass_ioctl, 0), + vmw_kms_cursor_bypass_ioctl, + DRM_MASTER | DRM_CONTROL_ALLOW | DRM_UNLOCKED), VMW_IOCTL_DEF(DRM_IOCTL_VMW_CONTROL_STREAM, vmw_overlay_ioctl, - 0), + DRM_MASTER | DRM_CONTROL_ALLOW | DRM_UNLOCKED), VMW_IOCTL_DEF(DRM_IOCTL_VMW_CLAIM_STREAM, vmw_stream_claim_ioctl, - 0), + DRM_MASTER | DRM_CONTROL_ALLOW | DRM_UNLOCKED), VMW_IOCTL_DEF(DRM_IOCTL_VMW_UNREF_STREAM, vmw_stream_unref_ioctl, - 0), + DRM_MASTER | DRM_CONTROL_ALLOW | DRM_UNLOCKED), VMW_IOCTL_DEF(DRM_IOCTL_VMW_CREATE_CONTEXT, vmw_context_define_ioctl, - 0), + DRM_AUTH | DRM_UNLOCKED), VMW_IOCTL_DEF(DRM_IOCTL_VMW_UNREF_CONTEXT, vmw_context_destroy_ioctl, - 0), + DRM_AUTH | DRM_UNLOCKED), VMW_IOCTL_DEF(DRM_IOCTL_VMW_CREATE_SURFACE, vmw_surface_define_ioctl, - 0), + DRM_AUTH | DRM_UNLOCKED), VMW_IOCTL_DEF(DRM_IOCTL_VMW_UNREF_SURFACE, vmw_surface_destroy_ioctl, - 0), + DRM_AUTH | DRM_UNLOCKED), VMW_IOCTL_DEF(DRM_IOCTL_VMW_REF_SURFACE, vmw_surface_reference_ioctl, - 0), + DRM_AUTH | DRM_UNLOCKED), VMW_IOCTL_DEF(DRM_IOCTL_VMW_EXECBUF, vmw_execbuf_ioctl, - 0), + DRM_AUTH | DRM_UNLOCKED), VMW_IOCTL_DEF(DRM_IOCTL_VMW_FIFO_DEBUG, vmw_fifo_debug_ioctl, - 0), + DRM_AUTH | DRM_ROOT_ONLY | DRM_MASTER | DRM_UNLOCKED), VMW_IOCTL_DEF(DRM_IOCTL_VMW_FENCE_WAIT, vmw_fence_wait_ioctl, - 0) + DRM_AUTH | DRM_UNLOCKED) }; static struct pci_device_id vmw_pci_id_list[] = { @@ -460,11 +462,9 @@ static long vmw_unlocked_ioctl(struct file *filp, unsigned int cmd, struct drm_file *file_priv = filp->private_data; struct drm_device *dev = file_priv->minor->dev; unsigned int nr = DRM_IOCTL_NR(cmd); - long ret; /* - * The driver private ioctls and TTM ioctls should be - * thread-safe. + * Do extra checking on driver private ioctls. */ if ((nr >= DRM_COMMAND_BASE) && (nr < DRM_COMMAND_END) @@ -477,18 +477,9 @@ static long vmw_unlocked_ioctl(struct file *filp, unsigned int cmd, nr - DRM_COMMAND_BASE); return -EINVAL; } - return drm_ioctl(filp->f_path.dentry->d_inode, - filp, cmd, arg); } - /* - * Not all old drm ioctls are thread-safe. - */ - - lock_kernel(); - ret = drm_ioctl(filp->f_path.dentry->d_inode, filp, cmd, arg); - unlock_kernel(); - return ret; + return drm_ioctl(filp, cmd, arg); } static int vmw_firstopen(struct drm_device *dev) diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h index 43546d09d1b0..e61bd85b6975 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h @@ -123,6 +123,7 @@ struct vmw_sw_context{ uint32_t last_cid; bool cid_valid; uint32_t last_sid; + uint32_t sid_translation; bool sid_valid; struct ttm_object_file *tfile; struct list_head validate_nodes; @@ -317,9 +318,10 @@ extern void vmw_surface_res_free(struct vmw_resource *res); extern int vmw_surface_init(struct vmw_private *dev_priv, struct vmw_surface *srf, void (*res_free) (struct vmw_resource *res)); -extern int vmw_user_surface_lookup(struct vmw_private *dev_priv, - struct ttm_object_file *tfile, - int sid, struct vmw_surface **out); +extern int vmw_user_surface_lookup_handle(struct vmw_private *dev_priv, + struct ttm_object_file *tfile, + uint32_t handle, + struct vmw_surface **out); extern int vmw_surface_destroy_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv); extern int vmw_surface_define_ioctl(struct drm_device *dev, void *data, @@ -328,7 +330,7 @@ extern int vmw_surface_reference_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv); extern int vmw_surface_check(struct vmw_private *dev_priv, struct ttm_object_file *tfile, - int id); + uint32_t handle, int *id); extern void vmw_dmabuf_bo_free(struct ttm_buffer_object *bo); extern int vmw_dmabuf_init(struct vmw_private *dev_priv, struct vmw_dma_buffer *vmw_bo, diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c b/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c index 7a39f3e6dc2c..2e92da567403 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c @@ -73,21 +73,32 @@ static int vmw_cmd_cid_check(struct vmw_private *dev_priv, static int vmw_cmd_sid_check(struct vmw_private *dev_priv, struct vmw_sw_context *sw_context, - uint32_t sid) + uint32_t *sid) { - if (unlikely((!sw_context->sid_valid || sid != sw_context->last_sid) && - sid != SVGA3D_INVALID_ID)) { - int ret = vmw_surface_check(dev_priv, sw_context->tfile, sid); + if (*sid == SVGA3D_INVALID_ID) + return 0; + + if (unlikely((!sw_context->sid_valid || + *sid != sw_context->last_sid))) { + int real_id; + int ret = vmw_surface_check(dev_priv, sw_context->tfile, + *sid, &real_id); if (unlikely(ret != 0)) { - DRM_ERROR("Could ot find or use surface %u\n", - (unsigned) sid); + DRM_ERROR("Could ot find or use surface 0x%08x " + "address 0x%08lx\n", + (unsigned int) *sid, + (unsigned long) sid); return ret; } - sw_context->last_sid = sid; + sw_context->last_sid = *sid; sw_context->sid_valid = true; - } + *sid = real_id; + sw_context->sid_translation = real_id; + } else + *sid = sw_context->sid_translation; + return 0; } @@ -107,7 +118,8 @@ static int vmw_cmd_set_render_target_check(struct vmw_private *dev_priv, return ret; cmd = container_of(header, struct vmw_sid_cmd, header); - return vmw_cmd_sid_check(dev_priv, sw_context, cmd->body.target.sid); + ret = vmw_cmd_sid_check(dev_priv, sw_context, &cmd->body.target.sid); + return ret; } static int vmw_cmd_surface_copy_check(struct vmw_private *dev_priv, @@ -121,10 +133,10 @@ static int vmw_cmd_surface_copy_check(struct vmw_private *dev_priv, int ret; cmd = container_of(header, struct vmw_sid_cmd, header); - ret = vmw_cmd_sid_check(dev_priv, sw_context, cmd->body.src.sid); + ret = vmw_cmd_sid_check(dev_priv, sw_context, &cmd->body.src.sid); if (unlikely(ret != 0)) return ret; - return vmw_cmd_sid_check(dev_priv, sw_context, cmd->body.dest.sid); + return vmw_cmd_sid_check(dev_priv, sw_context, &cmd->body.dest.sid); } static int vmw_cmd_stretch_blt_check(struct vmw_private *dev_priv, @@ -138,10 +150,10 @@ static int vmw_cmd_stretch_blt_check(struct vmw_private *dev_priv, int ret; cmd = container_of(header, struct vmw_sid_cmd, header); - ret = vmw_cmd_sid_check(dev_priv, sw_context, cmd->body.src.sid); + ret = vmw_cmd_sid_check(dev_priv, sw_context, &cmd->body.src.sid); if (unlikely(ret != 0)) return ret; - return vmw_cmd_sid_check(dev_priv, sw_context, cmd->body.dest.sid); + return vmw_cmd_sid_check(dev_priv, sw_context, &cmd->body.dest.sid); } static int vmw_cmd_blt_surf_screen_check(struct vmw_private *dev_priv, @@ -154,7 +166,7 @@ static int vmw_cmd_blt_surf_screen_check(struct vmw_private *dev_priv, } *cmd; cmd = container_of(header, struct vmw_sid_cmd, header); - return vmw_cmd_sid_check(dev_priv, sw_context, cmd->body.srcImage.sid); + return vmw_cmd_sid_check(dev_priv, sw_context, &cmd->body.srcImage.sid); } static int vmw_cmd_present_check(struct vmw_private *dev_priv, @@ -167,7 +179,7 @@ static int vmw_cmd_present_check(struct vmw_private *dev_priv, } *cmd; cmd = container_of(header, struct vmw_sid_cmd, header); - return vmw_cmd_sid_check(dev_priv, sw_context, cmd->body.sid); + return vmw_cmd_sid_check(dev_priv, sw_context, &cmd->body.sid); } static int vmw_cmd_dma(struct vmw_private *dev_priv, @@ -187,12 +199,7 @@ static int vmw_cmd_dma(struct vmw_private *dev_priv, uint32_t cur_validate_node; struct ttm_validate_buffer *val_buf; - cmd = container_of(header, struct vmw_dma_cmd, header); - ret = vmw_cmd_sid_check(dev_priv, sw_context, cmd->dma.host.sid); - if (unlikely(ret != 0)) - return ret; - handle = cmd->dma.guest.ptr.gmrId; ret = vmw_user_dmabuf_lookup(sw_context->tfile, handle, &vmw_bo); if (unlikely(ret != 0)) { @@ -228,14 +235,23 @@ static int vmw_cmd_dma(struct vmw_private *dev_priv, ++sw_context->cur_val_buf; } - ret = vmw_user_surface_lookup(dev_priv, sw_context->tfile, - cmd->dma.host.sid, &srf); + ret = vmw_user_surface_lookup_handle(dev_priv, sw_context->tfile, + cmd->dma.host.sid, &srf); if (ret) { DRM_ERROR("could not find surface\n"); goto out_no_reloc; } + /** + * Patch command stream with device SID. + */ + + cmd->dma.host.sid = srf->res.id; vmw_kms_cursor_snoop(srf, sw_context->tfile, bo, header); + /** + * FIXME: May deadlock here when called from the + * command parsing code. + */ vmw_surface_unreference(&srf); out_no_reloc: @@ -243,6 +259,90 @@ out_no_reloc: return ret; } +static int vmw_cmd_draw(struct vmw_private *dev_priv, + struct vmw_sw_context *sw_context, + SVGA3dCmdHeader *header) +{ + struct vmw_draw_cmd { + SVGA3dCmdHeader header; + SVGA3dCmdDrawPrimitives body; + } *cmd; + SVGA3dVertexDecl *decl = (SVGA3dVertexDecl *)( + (unsigned long)header + sizeof(*cmd)); + SVGA3dPrimitiveRange *range; + uint32_t i; + uint32_t maxnum; + int ret; + + ret = vmw_cmd_cid_check(dev_priv, sw_context, header); + if (unlikely(ret != 0)) + return ret; + + cmd = container_of(header, struct vmw_draw_cmd, header); + maxnum = (header->size - sizeof(cmd->body)) / sizeof(*decl); + + if (unlikely(cmd->body.numVertexDecls > maxnum)) { + DRM_ERROR("Illegal number of vertex declarations.\n"); + return -EINVAL; + } + + for (i = 0; i < cmd->body.numVertexDecls; ++i, ++decl) { + ret = vmw_cmd_sid_check(dev_priv, sw_context, + &decl->array.surfaceId); + if (unlikely(ret != 0)) + return ret; + } + + maxnum = (header->size - sizeof(cmd->body) - + cmd->body.numVertexDecls * sizeof(*decl)) / sizeof(*range); + if (unlikely(cmd->body.numRanges > maxnum)) { + DRM_ERROR("Illegal number of index ranges.\n"); + return -EINVAL; + } + + range = (SVGA3dPrimitiveRange *) decl; + for (i = 0; i < cmd->body.numRanges; ++i, ++range) { + ret = vmw_cmd_sid_check(dev_priv, sw_context, + &range->indexArray.surfaceId); + if (unlikely(ret != 0)) + return ret; + } + return 0; +} + + +static int vmw_cmd_tex_state(struct vmw_private *dev_priv, + struct vmw_sw_context *sw_context, + SVGA3dCmdHeader *header) +{ + struct vmw_tex_state_cmd { + SVGA3dCmdHeader header; + SVGA3dCmdSetTextureState state; + }; + + SVGA3dTextureState *last_state = (SVGA3dTextureState *) + ((unsigned long) header + header->size + sizeof(header)); + SVGA3dTextureState *cur_state = (SVGA3dTextureState *) + ((unsigned long) header + sizeof(struct vmw_tex_state_cmd)); + int ret; + + ret = vmw_cmd_cid_check(dev_priv, sw_context, header); + if (unlikely(ret != 0)) + return ret; + + for (; cur_state < last_state; ++cur_state) { + if (likely(cur_state->name != SVGA3D_TS_BIND_TEXTURE)) + continue; + + ret = vmw_cmd_sid_check(dev_priv, sw_context, + &cur_state->value); + if (unlikely(ret != 0)) + return ret; + } + + return 0; +} + typedef int (*vmw_cmd_func) (struct vmw_private *, struct vmw_sw_context *, @@ -264,7 +364,7 @@ static vmw_cmd_func vmw_cmd_funcs[SVGA_3D_CMD_MAX] = { VMW_CMD_DEF(SVGA_3D_CMD_SETRENDERSTATE, &vmw_cmd_cid_check), VMW_CMD_DEF(SVGA_3D_CMD_SETRENDERTARGET, &vmw_cmd_set_render_target_check), - VMW_CMD_DEF(SVGA_3D_CMD_SETTEXTURESTATE, &vmw_cmd_cid_check), + VMW_CMD_DEF(SVGA_3D_CMD_SETTEXTURESTATE, &vmw_cmd_tex_state), VMW_CMD_DEF(SVGA_3D_CMD_SETMATERIAL, &vmw_cmd_cid_check), VMW_CMD_DEF(SVGA_3D_CMD_SETLIGHTDATA, &vmw_cmd_cid_check), VMW_CMD_DEF(SVGA_3D_CMD_SETLIGHTENABLED, &vmw_cmd_cid_check), @@ -276,7 +376,7 @@ static vmw_cmd_func vmw_cmd_funcs[SVGA_3D_CMD_MAX] = { VMW_CMD_DEF(SVGA_3D_CMD_SHADER_DESTROY, &vmw_cmd_cid_check), VMW_CMD_DEF(SVGA_3D_CMD_SET_SHADER, &vmw_cmd_cid_check), VMW_CMD_DEF(SVGA_3D_CMD_SET_SHADER_CONST, &vmw_cmd_cid_check), - VMW_CMD_DEF(SVGA_3D_CMD_DRAW_PRIMITIVES, &vmw_cmd_cid_check), + VMW_CMD_DEF(SVGA_3D_CMD_DRAW_PRIMITIVES, &vmw_cmd_draw), VMW_CMD_DEF(SVGA_3D_CMD_SETSCISSORRECT, &vmw_cmd_cid_check), VMW_CMD_DEF(SVGA_3D_CMD_BEGIN_QUERY, &vmw_cmd_cid_check), VMW_CMD_DEF(SVGA_3D_CMD_END_QUERY, &vmw_cmd_cid_check), @@ -291,6 +391,7 @@ static int vmw_cmd_check(struct vmw_private *dev_priv, void *buf, uint32_t *size) { uint32_t cmd_id; + uint32_t size_remaining = *size; SVGA3dCmdHeader *header = (SVGA3dCmdHeader *) buf; int ret; @@ -304,6 +405,9 @@ static int vmw_cmd_check(struct vmw_private *dev_priv, *size = le32_to_cpu(header->size) + sizeof(SVGA3dCmdHeader); cmd_id -= SVGA_3D_CMD_BASE; + if (unlikely(*size > size_remaining)) + goto out_err; + if (unlikely(cmd_id >= SVGA_3D_CMD_MAX - SVGA_3D_CMD_BASE)) goto out_err; @@ -326,6 +430,7 @@ static int vmw_cmd_check_all(struct vmw_private *dev_priv, int ret; while (cur_size > 0) { + size = cur_size; ret = vmw_cmd_check(dev_priv, sw_context, buf, &size); if (unlikely(ret != 0)) return ret; @@ -386,7 +491,7 @@ static int vmw_validate_single_buffer(struct vmw_private *dev_priv, return 0; ret = vmw_gmr_bind(dev_priv, bo); - if (likely(ret == 0 || ret == -ERESTART)) + if (likely(ret == 0 || ret == -ERESTARTSYS)) return ret; @@ -429,7 +534,7 @@ int vmw_execbuf_ioctl(struct drm_device *dev, void *data, ret = mutex_lock_interruptible(&dev_priv->cmdbuf_mutex); if (unlikely(ret != 0)) { - ret = -ERESTART; + ret = -ERESTARTSYS; goto out_no_cmd_mutex; } diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c b/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c index 76b0693e2458..01feb48af333 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c @@ -191,7 +191,7 @@ static int vmw_fifo_wait_noirq(struct vmw_private *dev_priv, } schedule_timeout(1); if (interruptible && signal_pending(current)) { - ret = -ERESTART; + ret = -ERESTARTSYS; break; } } @@ -237,9 +237,7 @@ static int vmw_fifo_wait(struct vmw_private *dev_priv, (dev_priv->fifo_queue, !vmw_fifo_is_full(dev_priv, bytes), timeout); - if (unlikely(ret == -ERESTARTSYS)) - ret = -ERESTART; - else if (unlikely(ret == 0)) + if (unlikely(ret == 0)) ret = -EBUSY; else if (likely(ret > 0)) ret = 0; diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_irq.c b/drivers/gpu/drm/vmwgfx/vmwgfx_irq.c index 9e0f0306eedb..d40086fc8647 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_irq.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_irq.c @@ -155,7 +155,7 @@ int vmw_fallback_wait(struct vmw_private *dev_priv, TASK_UNINTERRUPTIBLE); } if (interruptible && signal_pending(current)) { - ret = -ERESTART; + ret = -ERESTARTSYS; break; } } @@ -218,9 +218,7 @@ int vmw_wait_fence(struct vmw_private *dev_priv, vmw_fence_signaled(dev_priv, sequence), timeout); - if (unlikely(ret == -ERESTARTSYS)) - ret = -ERESTART; - else if (unlikely(ret == 0)) + if (unlikely(ret == 0)) ret = -EBUSY; else if (likely(ret > 0)) ret = 0; diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c index e9403be446fe..b1af76e371c3 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c @@ -106,8 +106,8 @@ int vmw_du_crtc_cursor_set(struct drm_crtc *crtc, struct drm_file *file_priv, int ret; if (handle) { - ret = vmw_user_surface_lookup(dev_priv, tfile, - handle, &surface); + ret = vmw_user_surface_lookup_handle(dev_priv, tfile, + handle, &surface); if (!ret) { if (!surface->snooper.image) { DRM_ERROR("surface not suitable for cursor\n"); @@ -704,8 +704,8 @@ static struct drm_framebuffer *vmw_kms_fb_create(struct drm_device *dev, struct vmw_dma_buffer *bo = NULL; int ret; - ret = vmw_user_surface_lookup(dev_priv, tfile, - mode_cmd->handle, &surface); + ret = vmw_user_surface_lookup_handle(dev_priv, tfile, + mode_cmd->handle, &surface); if (ret) goto try_dmabuf; diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c b/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c index a1ceed0c8e07..c012d5927f65 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c @@ -488,28 +488,44 @@ static void vmw_user_surface_free(struct vmw_resource *res) kfree(user_srf); } -int vmw_user_surface_lookup(struct vmw_private *dev_priv, - struct ttm_object_file *tfile, - int sid, struct vmw_surface **out) +int vmw_user_surface_lookup_handle(struct vmw_private *dev_priv, + struct ttm_object_file *tfile, + uint32_t handle, struct vmw_surface **out) { struct vmw_resource *res; struct vmw_surface *srf; struct vmw_user_surface *user_srf; + struct ttm_base_object *base; + int ret = -EINVAL; - res = vmw_resource_lookup(dev_priv, &dev_priv->surface_idr, sid); - if (unlikely(res == NULL)) + base = ttm_base_object_lookup(tfile, handle); + if (unlikely(base == NULL)) return -EINVAL; - if (res->res_free != &vmw_user_surface_free) - return -EINVAL; + if (unlikely(base->object_type != VMW_RES_SURFACE)) + goto out_bad_resource; - srf = container_of(res, struct vmw_surface, res); - user_srf = container_of(srf, struct vmw_user_surface, srf); - if (user_srf->base.tfile != tfile && !user_srf->base.shareable) - return -EPERM; + user_srf = container_of(base, struct vmw_user_surface, base); + srf = &user_srf->srf; + res = &srf->res; + + read_lock(&dev_priv->resource_lock); + + if (!res->avail || res->res_free != &vmw_user_surface_free) { + read_unlock(&dev_priv->resource_lock); + goto out_bad_resource; + } + + kref_get(&res->kref); + read_unlock(&dev_priv->resource_lock); *out = srf; - return 0; + ret = 0; + +out_bad_resource: + ttm_base_object_unref(&base); + + return ret; } static void vmw_user_surface_base_release(struct ttm_base_object **p_base) @@ -526,35 +542,10 @@ static void vmw_user_surface_base_release(struct ttm_base_object **p_base) int vmw_surface_destroy_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv) { - struct vmw_private *dev_priv = vmw_priv(dev); - struct vmw_resource *res; - struct vmw_surface *srf; - struct vmw_user_surface *user_srf; struct drm_vmw_surface_arg *arg = (struct drm_vmw_surface_arg *)data; struct ttm_object_file *tfile = vmw_fpriv(file_priv)->tfile; - int ret = 0; - - res = vmw_resource_lookup(dev_priv, &dev_priv->surface_idr, arg->sid); - if (unlikely(res == NULL)) - return -EINVAL; - - if (res->res_free != &vmw_user_surface_free) { - ret = -EINVAL; - goto out; - } - srf = container_of(res, struct vmw_surface, res); - user_srf = container_of(srf, struct vmw_user_surface, srf); - if (user_srf->base.tfile != tfile && !user_srf->base.shareable) { - ret = -EPERM; - goto out; - } - - ttm_ref_object_base_unref(tfile, user_srf->base.hash.key, - TTM_REF_USAGE); -out: - vmw_resource_unreference(&res); - return ret; + return ttm_ref_object_base_unref(tfile, arg->sid, TTM_REF_USAGE); } int vmw_surface_define_ioctl(struct drm_device *dev, void *data, @@ -649,7 +640,10 @@ int vmw_surface_define_ioctl(struct drm_device *dev, void *data, } srf->snooper.crtc = NULL; - rep->sid = res->id; + rep->sid = user_srf->base.hash.key; + if (rep->sid == SVGA3D_INVALID_ID) + DRM_ERROR("Created bad Surface ID.\n"); + vmw_resource_unreference(&res); return 0; out_err1: @@ -662,39 +656,33 @@ out_err0: int vmw_surface_reference_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv) { - struct vmw_private *dev_priv = vmw_priv(dev); union drm_vmw_surface_reference_arg *arg = (union drm_vmw_surface_reference_arg *)data; struct drm_vmw_surface_arg *req = &arg->req; struct drm_vmw_surface_create_req *rep = &arg->rep; struct ttm_object_file *tfile = vmw_fpriv(file_priv)->tfile; - struct vmw_resource *res; struct vmw_surface *srf; struct vmw_user_surface *user_srf; struct drm_vmw_size __user *user_sizes; - int ret; + struct ttm_base_object *base; + int ret = -EINVAL; - res = vmw_resource_lookup(dev_priv, &dev_priv->surface_idr, req->sid); - if (unlikely(res == NULL)) + base = ttm_base_object_lookup(tfile, req->sid); + if (unlikely(base == NULL)) { + DRM_ERROR("Could not find surface to reference.\n"); return -EINVAL; - - if (res->res_free != &vmw_user_surface_free) { - ret = -EINVAL; - goto out; } - srf = container_of(res, struct vmw_surface, res); - user_srf = container_of(srf, struct vmw_user_surface, srf); - if (user_srf->base.tfile != tfile && !user_srf->base.shareable) { - DRM_ERROR("Tried to reference none shareable surface\n"); - ret = -EPERM; - goto out; - } + if (unlikely(base->object_type != VMW_RES_SURFACE)) + goto out_bad_resource; + + user_srf = container_of(base, struct vmw_user_surface, base); + srf = &user_srf->srf; ret = ttm_ref_object_add(tfile, &user_srf->base, TTM_REF_USAGE, NULL); if (unlikely(ret != 0)) { DRM_ERROR("Could not add a reference to a surface.\n"); - goto out; + goto out_no_reference; } rep->flags = srf->flags; @@ -706,40 +694,43 @@ int vmw_surface_reference_ioctl(struct drm_device *dev, void *data, if (user_sizes) ret = copy_to_user(user_sizes, srf->sizes, srf->num_sizes * sizeof(*srf->sizes)); - if (unlikely(ret != 0)) { + if (unlikely(ret != 0)) DRM_ERROR("copy_to_user failed %p %u\n", user_sizes, srf->num_sizes); - /** - * FIXME: Unreference surface here? - */ - goto out; - } -out: - vmw_resource_unreference(&res); +out_bad_resource: +out_no_reference: + ttm_base_object_unref(&base); + return ret; } int vmw_surface_check(struct vmw_private *dev_priv, struct ttm_object_file *tfile, - int id) + uint32_t handle, int *id) { - struct vmw_resource *res; - int ret = 0; + struct ttm_base_object *base; + struct vmw_user_surface *user_srf; - read_lock(&dev_priv->resource_lock); - res = idr_find(&dev_priv->surface_idr, id); - if (res && res->avail) { - struct vmw_surface *srf = - container_of(res, struct vmw_surface, res); - struct vmw_user_surface *usrf = - container_of(srf, struct vmw_user_surface, srf); + int ret = -EPERM; - if (usrf->base.tfile != tfile && !usrf->base.shareable) - ret = -EPERM; - } else - ret = -EINVAL; - read_unlock(&dev_priv->resource_lock); + base = ttm_base_object_lookup(tfile, handle); + if (unlikely(base == NULL)) + return -EINVAL; + + if (unlikely(base->object_type != VMW_RES_SURFACE)) + goto out_bad_surface; + user_srf = container_of(base, struct vmw_user_surface, base); + *id = user_srf->srf.res.id; + ret = 0; + +out_bad_surface: + /** + * FIXME: May deadlock here when called from the + * command parsing code. + */ + + ttm_base_object_unref(&base); return ret; } diff --git a/drivers/hid/hid-lg.h b/drivers/hid/hid-lg.h index 27ae750ca878..bf31592eaf79 100644 --- a/drivers/hid/hid-lg.h +++ b/drivers/hid/hid-lg.h @@ -1,8 +1,6 @@ #ifndef __HID_LG_H #define __HID_LG_H -#include <linux/autoconf.h> - #ifdef CONFIG_LOGITECH_FF int lgff_init(struct hid_device *hdev); #else diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 95ccbe377f9c..46c3c566307e 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -228,6 +228,18 @@ config SENSORS_K8TEMP This driver can also be built as a module. If so, the module will be called k8temp. +config SENSORS_K10TEMP + tristate "AMD Phenom/Sempron/Turion/Opteron temperature sensor" + depends on X86 && PCI + help + If you say yes here you get support for the temperature + sensor(s) inside your CPU. Supported are later revisions of + the AMD Family 10h and all revisions of the AMD Family 11h + microarchitectures. + + This driver can also be built as a module. If so, the module + will be called k10temp. + config SENSORS_AMS tristate "Apple Motion Sensor driver" depends on PPC_PMAC && !PPC64 && INPUT && ((ADB_PMU && I2C = y) || (ADB_PMU && !I2C) || I2C) && EXPERIMENTAL @@ -810,6 +822,14 @@ config SENSORS_TMP421 This driver can also be built as a module. If so, the module will be called tmp421. +config SENSORS_VIA_CPUTEMP + tristate "VIA CPU temperature sensor" + depends on X86 + help + If you say yes here you get support for the temperature + sensor inside your CPU. Supported are all known variants of + the VIA C7 and Nano. + config SENSORS_VIA686A tristate "VIA686A" depends on PCI @@ -998,6 +1018,23 @@ config SENSORS_LIS3_SPI will be called lis3lv02d and a specific module for the SPI transport is called lis3lv02d_spi. +config SENSORS_LIS3_I2C + tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer (I2C)" + depends on I2C && INPUT + select INPUT_POLLDEV + default n + help + This driver provides support for the LIS3LV02Dx accelerometer connected + via I2C. The accelerometer data is readable via + /sys/devices/platform/lis3lv02d. + + This driver also provides an absolute input class device, allowing + the device to act as a pinball machine-esque joystick. + + This driver can also be built as modules. If so, the core module + will be called lis3lv02d and a specific module for the I2C transport + is called lis3lv02d_i2c. + config SENSORS_APPLESMC tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)" depends on INPUT && X86 diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index 33c2ee105284..450c8e894277 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -53,8 +53,10 @@ obj-$(CONFIG_SENSORS_IBMAEM) += ibmaem.o obj-$(CONFIG_SENSORS_IBMPEX) += ibmpex.o obj-$(CONFIG_SENSORS_IT87) += it87.o obj-$(CONFIG_SENSORS_K8TEMP) += k8temp.o +obj-$(CONFIG_SENSORS_K10TEMP) += k10temp.o obj-$(CONFIG_SENSORS_LIS3LV02D) += lis3lv02d.o hp_accel.o obj-$(CONFIG_SENSORS_LIS3_SPI) += lis3lv02d.o lis3lv02d_spi.o +obj-$(CONFIG_SENSORS_LIS3_I2C) += lis3lv02d.o lis3lv02d_i2c.o obj-$(CONFIG_SENSORS_LM63) += lm63.o obj-$(CONFIG_SENSORS_LM70) += lm70.o obj-$(CONFIG_SENSORS_LM73) += lm73.o @@ -87,6 +89,7 @@ obj-$(CONFIG_SENSORS_SMSC47M192)+= smsc47m192.o obj-$(CONFIG_SENSORS_THMC50) += thmc50.o obj-$(CONFIG_SENSORS_TMP401) += tmp401.o obj-$(CONFIG_SENSORS_TMP421) += tmp421.o +obj-$(CONFIG_SENSORS_VIA_CPUTEMP)+= via-cputemp.o obj-$(CONFIG_SENSORS_VIA686A) += via686a.o obj-$(CONFIG_SENSORS_VT1211) += vt1211.o obj-$(CONFIG_SENSORS_VT8231) += vt8231.o diff --git a/drivers/hwmon/k10temp.c b/drivers/hwmon/k10temp.c new file mode 100644 index 000000000000..d8a26d16d948 --- /dev/null +++ b/drivers/hwmon/k10temp.c @@ -0,0 +1,197 @@ +/* + * k10temp.c - AMD Family 10h/11h processor hardware monitoring + * + * Copyright (c) 2009 Clemens Ladisch <clemens@ladisch.de> + * + * + * This driver is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License; either + * version 2 of the License, or (at your option) any later version. + * + * This driver is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + * See the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this driver; if not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/err.h> +#include <linux/hwmon.h> +#include <linux/hwmon-sysfs.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <asm/processor.h> + +MODULE_DESCRIPTION("AMD Family 10h/11h CPU core temperature monitor"); +MODULE_AUTHOR("Clemens Ladisch <clemens@ladisch.de>"); +MODULE_LICENSE("GPL"); + +static bool force; +module_param(force, bool, 0444); +MODULE_PARM_DESC(force, "force loading on processors with erratum 319"); + +#define REG_HARDWARE_THERMAL_CONTROL 0x64 +#define HTC_ENABLE 0x00000001 + +#define REG_REPORTED_TEMPERATURE 0xa4 + +#define REG_NORTHBRIDGE_CAPABILITIES 0xe8 +#define NB_CAP_HTC 0x00000400 + +static ssize_t show_temp(struct device *dev, + struct device_attribute *attr, char *buf) +{ + u32 regval; + + pci_read_config_dword(to_pci_dev(dev), + REG_REPORTED_TEMPERATURE, ®val); + return sprintf(buf, "%u\n", (regval >> 21) * 125); +} + +static ssize_t show_temp_max(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return sprintf(buf, "%d\n", 70 * 1000); +} + +static ssize_t show_temp_crit(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + int show_hyst = attr->index; + u32 regval; + int value; + + pci_read_config_dword(to_pci_dev(dev), + REG_HARDWARE_THERMAL_CONTROL, ®val); + value = ((regval >> 16) & 0x7f) * 500 + 52000; + if (show_hyst) + value -= ((regval >> 24) & 0xf) * 500; + return sprintf(buf, "%d\n", value); +} + +static ssize_t show_name(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return sprintf(buf, "k10temp\n"); +} + +static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL); +static DEVICE_ATTR(temp1_max, S_IRUGO, show_temp_max, NULL); +static SENSOR_DEVICE_ATTR(temp1_crit, S_IRUGO, show_temp_crit, NULL, 0); +static SENSOR_DEVICE_ATTR(temp1_crit_hyst, S_IRUGO, show_temp_crit, NULL, 1); +static DEVICE_ATTR(name, S_IRUGO, show_name, NULL); + +static bool __devinit has_erratum_319(void) +{ + /* + * Erratum 319: The thermal sensor of older Family 10h processors + * (B steppings) may be unreliable. + */ + return boot_cpu_data.x86 == 0x10 && boot_cpu_data.x86_model <= 2; +} + +static int __devinit k10temp_probe(struct pci_dev *pdev, + const struct pci_device_id *id) +{ + struct device *hwmon_dev; + u32 reg_caps, reg_htc; + int err; + + if (has_erratum_319() && !force) { + dev_err(&pdev->dev, + "unreliable CPU thermal sensor; monitoring disabled\n"); + err = -ENODEV; + goto exit; + } + + err = device_create_file(&pdev->dev, &dev_attr_temp1_input); + if (err) + goto exit; + err = device_create_file(&pdev->dev, &dev_attr_temp1_max); + if (err) + goto exit_remove; + + pci_read_config_dword(pdev, REG_NORTHBRIDGE_CAPABILITIES, ®_caps); + pci_read_config_dword(pdev, REG_HARDWARE_THERMAL_CONTROL, ®_htc); + if ((reg_caps & NB_CAP_HTC) && (reg_htc & HTC_ENABLE)) { + err = device_create_file(&pdev->dev, + &sensor_dev_attr_temp1_crit.dev_attr); + if (err) + goto exit_remove; + err = device_create_file(&pdev->dev, + &sensor_dev_attr_temp1_crit_hyst.dev_attr); + if (err) + goto exit_remove; + } + + err = device_create_file(&pdev->dev, &dev_attr_name); + if (err) + goto exit_remove; + + hwmon_dev = hwmon_device_register(&pdev->dev); + if (IS_ERR(hwmon_dev)) { + err = PTR_ERR(hwmon_dev); + goto exit_remove; + } + dev_set_drvdata(&pdev->dev, hwmon_dev); + + if (has_erratum_319() && force) + dev_warn(&pdev->dev, + "unreliable CPU thermal sensor; check erratum 319\n"); + return 0; + +exit_remove: + device_remove_file(&pdev->dev, &dev_attr_name); + device_remove_file(&pdev->dev, &dev_attr_temp1_input); + device_remove_file(&pdev->dev, &dev_attr_temp1_max); + device_remove_file(&pdev->dev, + &sensor_dev_attr_temp1_crit.dev_attr); + device_remove_file(&pdev->dev, + &sensor_dev_attr_temp1_crit_hyst.dev_attr); +exit: + return err; +} + +static void __devexit k10temp_remove(struct pci_dev *pdev) +{ + hwmon_device_unregister(dev_get_drvdata(&pdev->dev)); + device_remove_file(&pdev->dev, &dev_attr_name); + device_remove_file(&pdev->dev, &dev_attr_temp1_input); + device_remove_file(&pdev->dev, &dev_attr_temp1_max); + device_remove_file(&pdev->dev, + &sensor_dev_attr_temp1_crit.dev_attr); + device_remove_file(&pdev->dev, + &sensor_dev_attr_temp1_crit_hyst.dev_attr); + dev_set_drvdata(&pdev->dev, NULL); +} + +static struct pci_device_id k10temp_id_table[] = { + { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_10H_NB_MISC) }, + { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_11H_NB_MISC) }, + {} +}; +MODULE_DEVICE_TABLE(pci, k10temp_id_table); + +static struct pci_driver k10temp_driver = { + .name = "k10temp", + .id_table = k10temp_id_table, + .probe = k10temp_probe, + .remove = __devexit_p(k10temp_remove), +}; + +static int __init k10temp_init(void) +{ + return pci_register_driver(&k10temp_driver); +} + +static void __exit k10temp_exit(void) +{ + pci_unregister_driver(&k10temp_driver); +} + +module_init(k10temp_init) +module_exit(k10temp_exit) diff --git a/drivers/hwmon/lis3lv02d_i2c.c b/drivers/hwmon/lis3lv02d_i2c.c new file mode 100644 index 000000000000..dc1f5402c1d7 --- /dev/null +++ b/drivers/hwmon/lis3lv02d_i2c.c @@ -0,0 +1,183 @@ +/* + * drivers/hwmon/lis3lv02d_i2c.c + * + * Implements I2C interface for lis3lv02d (STMicroelectronics) accelerometer. + * Driver is based on corresponding SPI driver written by Daniel Mack + * (lis3lv02d_spi.c (C) 2009 Daniel Mack <daniel@caiaq.de> ). + * + * Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies). + * + * Contact: Samu Onkalo <samu.p.onkalo@nokia.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/err.h> +#include <linux/i2c.h> +#include "lis3lv02d.h" + +#define DRV_NAME "lis3lv02d_i2c" + +static inline s32 lis3_i2c_write(struct lis3lv02d *lis3, int reg, u8 value) +{ + struct i2c_client *c = lis3->bus_priv; + return i2c_smbus_write_byte_data(c, reg, value); +} + +static inline s32 lis3_i2c_read(struct lis3lv02d *lis3, int reg, u8 *v) +{ + struct i2c_client *c = lis3->bus_priv; + *v = i2c_smbus_read_byte_data(c, reg); + return 0; +} + +static int lis3_i2c_init(struct lis3lv02d *lis3) +{ + u8 reg; + int ret; + + /* power up the device */ + ret = lis3->read(lis3, CTRL_REG1, ®); + if (ret < 0) + return ret; + + reg |= CTRL1_PD0; + return lis3->write(lis3, CTRL_REG1, reg); +} + +/* Default axis mapping but it can be overwritten by platform data */ +static struct axis_conversion lis3lv02d_axis_map = { LIS3_DEV_X, + LIS3_DEV_Y, + LIS3_DEV_Z }; + +static int __devinit lis3lv02d_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + int ret = 0; + struct lis3lv02d_platform_data *pdata = client->dev.platform_data; + + if (pdata) { + if (pdata->axis_x) + lis3lv02d_axis_map.x = pdata->axis_x; + + if (pdata->axis_y) + lis3lv02d_axis_map.y = pdata->axis_y; + + if (pdata->axis_z) + lis3lv02d_axis_map.z = pdata->axis_z; + + if (pdata->setup_resources) + ret = pdata->setup_resources(); + + if (ret) + goto fail; + } + + lis3_dev.pdata = pdata; + lis3_dev.bus_priv = client; + lis3_dev.init = lis3_i2c_init; + lis3_dev.read = lis3_i2c_read; + lis3_dev.write = lis3_i2c_write; + lis3_dev.irq = client->irq; + lis3_dev.ac = lis3lv02d_axis_map; + + i2c_set_clientdata(client, &lis3_dev); + ret = lis3lv02d_init_device(&lis3_dev); +fail: + return ret; +} + +static int __devexit lis3lv02d_i2c_remove(struct i2c_client *client) +{ + struct lis3lv02d *lis3 = i2c_get_clientdata(client); + struct lis3lv02d_platform_data *pdata = client->dev.platform_data; + + if (pdata && pdata->release_resources) + pdata->release_resources(); + + lis3lv02d_joystick_disable(); + lis3lv02d_poweroff(lis3); + + return lis3lv02d_remove_fs(&lis3_dev); +} + +#ifdef CONFIG_PM +static int lis3lv02d_i2c_suspend(struct i2c_client *client, pm_message_t mesg) +{ + struct lis3lv02d *lis3 = i2c_get_clientdata(client); + + if (!lis3->pdata->wakeup_flags) + lis3lv02d_poweroff(lis3); + return 0; +} + +static int lis3lv02d_i2c_resume(struct i2c_client *client) +{ + struct lis3lv02d *lis3 = i2c_get_clientdata(client); + + if (!lis3->pdata->wakeup_flags) + lis3lv02d_poweron(lis3); + return 0; +} + +static void lis3lv02d_i2c_shutdown(struct i2c_client *client) +{ + lis3lv02d_i2c_suspend(client, PMSG_SUSPEND); +} +#else +#define lis3lv02d_i2c_suspend NULL +#define lis3lv02d_i2c_resume NULL +#define lis3lv02d_i2c_shutdown NULL +#endif + +static const struct i2c_device_id lis3lv02d_id[] = { + {"lis3lv02d", 0 }, + {} +}; + +MODULE_DEVICE_TABLE(i2c, lis3lv02d_id); + +static struct i2c_driver lis3lv02d_i2c_driver = { + .driver = { + .name = DRV_NAME, + .owner = THIS_MODULE, + }, + .suspend = lis3lv02d_i2c_suspend, + .shutdown = lis3lv02d_i2c_shutdown, + .resume = lis3lv02d_i2c_resume, + .probe = lis3lv02d_i2c_probe, + .remove = __devexit_p(lis3lv02d_i2c_remove), + .id_table = lis3lv02d_id, +}; + +static int __init lis3lv02d_init(void) +{ + return i2c_add_driver(&lis3lv02d_i2c_driver); +} + +static void __exit lis3lv02d_exit(void) +{ + i2c_del_driver(&lis3lv02d_i2c_driver); +} + +MODULE_AUTHOR("Nokia Corporation"); +MODULE_DESCRIPTION("lis3lv02d I2C interface"); +MODULE_LICENSE("GPL"); + +module_init(lis3lv02d_init); +module_exit(lis3lv02d_exit); diff --git a/drivers/hwmon/sht15.c b/drivers/hwmon/sht15.c index ebe38b680ee3..864a371f6eb9 100644 --- a/drivers/hwmon/sht15.c +++ b/drivers/hwmon/sht15.c @@ -305,7 +305,7 @@ static inline int sht15_calc_temp(struct sht15_data *data) int d1 = 0; int i; - for (i = 1; i < ARRAY_SIZE(temppoints) - 1; i++) + for (i = 1; i < ARRAY_SIZE(temppoints); i++) /* Find pointer to interpolate */ if (data->supply_uV > temppoints[i - 1].vdd) { d1 = (data->supply_uV/1000 - temppoints[i - 1].vdd) @@ -332,12 +332,12 @@ static inline int sht15_calc_humid(struct sht15_data *data) const int c1 = -4; const int c2 = 40500; /* x 10 ^ -6 */ - const int c3 = 2800; /* x10 ^ -9 */ + const int c3 = -2800; /* x10 ^ -9 */ RHlinear = c1*1000 + c2 * data->val_humid/1000 + (data->val_humid * data->val_humid * c3)/1000000; - return (temp - 25000) * (10000 + 800 * data->val_humid) + return (temp - 25000) * (10000 + 80 * data->val_humid) / 1000000 + RHlinear; } diff --git a/drivers/hwmon/smsc47m1.c b/drivers/hwmon/smsc47m1.c index 8ad50fdba00d..9ca97818bd4b 100644 --- a/drivers/hwmon/smsc47m1.c +++ b/drivers/hwmon/smsc47m1.c @@ -136,11 +136,11 @@ struct smsc47m1_data { struct smsc47m1_sio_data { enum chips type; + u8 activate; /* Remember initial device state */ }; -static int smsc47m1_probe(struct platform_device *pdev); -static int __devexit smsc47m1_remove(struct platform_device *pdev); +static int __exit smsc47m1_remove(struct platform_device *pdev); static struct smsc47m1_data *smsc47m1_update_device(struct device *dev, int init); @@ -160,8 +160,7 @@ static struct platform_driver smsc47m1_driver = { .owner = THIS_MODULE, .name = DRVNAME, }, - .probe = smsc47m1_probe, - .remove = __devexit_p(smsc47m1_remove), + .remove = __exit_p(smsc47m1_remove), }; static ssize_t get_fan(struct device *dev, struct device_attribute @@ -470,24 +469,126 @@ static int __init smsc47m1_find(unsigned short *addr, superio_select(); *addr = (superio_inb(SUPERIO_REG_BASE) << 8) | superio_inb(SUPERIO_REG_BASE + 1); - val = superio_inb(SUPERIO_REG_ACT); - if (*addr == 0 || (val & 0x01) == 0) { - pr_info(DRVNAME ": Device is disabled, will not use\n"); + if (*addr == 0) { + pr_info(DRVNAME ": Device address not set, will not use\n"); superio_exit(); return -ENODEV; } + /* Enable only if address is set (needed at least on the + * Compaq Presario S4000NX) */ + sio_data->activate = superio_inb(SUPERIO_REG_ACT); + if ((sio_data->activate & 0x01) == 0) { + pr_info(DRVNAME ": Enabling device\n"); + superio_outb(SUPERIO_REG_ACT, sio_data->activate | 0x01); + } + superio_exit(); return 0; } -static int __devinit smsc47m1_probe(struct platform_device *pdev) +/* Restore device to its initial state */ +static void __init smsc47m1_restore(const struct smsc47m1_sio_data *sio_data) +{ + if ((sio_data->activate & 0x01) == 0) { + superio_enter(); + superio_select(); + + pr_info(DRVNAME ": Disabling device\n"); + superio_outb(SUPERIO_REG_ACT, sio_data->activate); + + superio_exit(); + } +} + +#define CHECK 1 +#define REQUEST 2 +#define RELEASE 3 + +/* + * This function can be used to: + * - test for resource conflicts with ACPI + * - request the resources + * - release the resources + * We only allocate the I/O ports we really need, to minimize the risk of + * conflicts with ACPI or with other drivers. + */ +static int smsc47m1_handle_resources(unsigned short address, enum chips type, + int action, struct device *dev) +{ + static const u8 ports_m1[] = { + /* register, region length */ + 0x04, 1, + 0x33, 4, + 0x56, 7, + }; + + static const u8 ports_m2[] = { + /* register, region length */ + 0x04, 1, + 0x09, 1, + 0x2c, 2, + 0x35, 4, + 0x56, 7, + 0x69, 4, + }; + + int i, ports_size, err; + const u8 *ports; + + switch (type) { + case smsc47m1: + default: + ports = ports_m1; + ports_size = ARRAY_SIZE(ports_m1); + break; + case smsc47m2: + ports = ports_m2; + ports_size = ARRAY_SIZE(ports_m2); + break; + } + + for (i = 0; i + 1 < ports_size; i += 2) { + unsigned short start = address + ports[i]; + unsigned short len = ports[i + 1]; + + switch (action) { + case CHECK: + /* Only check for conflicts */ + err = acpi_check_region(start, len, DRVNAME); + if (err) + return err; + break; + case REQUEST: + /* Request the resources */ + if (!request_region(start, len, DRVNAME)) { + dev_err(dev, "Region 0x%hx-0x%hx already in " + "use!\n", start, start + len); + + /* Undo all requests */ + for (i -= 2; i >= 0; i -= 2) + release_region(address + ports[i], + ports[i + 1]); + return -EBUSY; + } + break; + case RELEASE: + /* Release the resources */ + release_region(start, len); + break; + } + } + + return 0; +} + +static int __init smsc47m1_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct smsc47m1_sio_data *sio_data = dev->platform_data; struct smsc47m1_data *data; struct resource *res; - int err = 0; + int err; int fan1, fan2, fan3, pwm1, pwm2, pwm3; static const char *names[] = { @@ -496,12 +597,10 @@ static int __devinit smsc47m1_probe(struct platform_device *pdev) }; res = platform_get_resource(pdev, IORESOURCE_IO, 0); - if (!request_region(res->start, SMSC_EXTENT, DRVNAME)) { - dev_err(dev, "Region 0x%lx-0x%lx already in use!\n", - (unsigned long)res->start, - (unsigned long)res->end); - return -EBUSY; - } + err = smsc47m1_handle_resources(res->start, sio_data->type, + REQUEST, dev); + if (err < 0) + return err; if (!(data = kzalloc(sizeof(struct smsc47m1_data), GFP_KERNEL))) { err = -ENOMEM; @@ -637,11 +736,11 @@ error_free: platform_set_drvdata(pdev, NULL); kfree(data); error_release: - release_region(res->start, SMSC_EXTENT); + smsc47m1_handle_resources(res->start, sio_data->type, RELEASE, dev); return err; } -static int __devexit smsc47m1_remove(struct platform_device *pdev) +static int __exit smsc47m1_remove(struct platform_device *pdev) { struct smsc47m1_data *data = platform_get_drvdata(pdev); struct resource *res; @@ -650,7 +749,7 @@ static int __devexit smsc47m1_remove(struct platform_device *pdev) sysfs_remove_group(&pdev->dev.kobj, &smsc47m1_group); res = platform_get_resource(pdev, IORESOURCE_IO, 0); - release_region(res->start, SMSC_EXTENT); + smsc47m1_handle_resources(res->start, data->type, RELEASE, &pdev->dev); platform_set_drvdata(pdev, NULL); kfree(data); @@ -717,7 +816,7 @@ static int __init smsc47m1_device_add(unsigned short address, }; int err; - err = acpi_check_resource_conflict(&res); + err = smsc47m1_handle_resources(address, sio_data->type, CHECK, NULL); if (err) goto exit; @@ -766,27 +865,29 @@ static int __init sm_smsc47m1_init(void) if (smsc47m1_find(&address, &sio_data)) return -ENODEV; - err = platform_driver_register(&smsc47m1_driver); + /* Sets global pdev as a side effect */ + err = smsc47m1_device_add(address, &sio_data); if (err) goto exit; - /* Sets global pdev as a side effect */ - err = smsc47m1_device_add(address, &sio_data); + err = platform_driver_probe(&smsc47m1_driver, smsc47m1_probe); if (err) - goto exit_driver; + goto exit_device; return 0; -exit_driver: - platform_driver_unregister(&smsc47m1_driver); +exit_device: + platform_device_unregister(pdev); + smsc47m1_restore(&sio_data); exit: return err; } static void __exit sm_smsc47m1_exit(void) { - platform_device_unregister(pdev); platform_driver_unregister(&smsc47m1_driver); + smsc47m1_restore(pdev->dev.platform_data); + platform_device_unregister(pdev); } MODULE_AUTHOR("Mark D. Studebaker <mdsxyz123@yahoo.com>"); diff --git a/drivers/hwmon/via-cputemp.c b/drivers/hwmon/via-cputemp.c new file mode 100644 index 000000000000..7442cf754856 --- /dev/null +++ b/drivers/hwmon/via-cputemp.c @@ -0,0 +1,356 @@ +/* + * via-cputemp.c - Driver for VIA CPU core temperature monitoring + * Copyright (C) 2009 VIA Technologies, Inc. + * + * based on existing coretemp.c, which is + * + * Copyright (C) 2007 Rudolf Marek <r.marek@assembler.cz> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301 USA. + */ + +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/jiffies.h> +#include <linux/hwmon.h> +#include <linux/sysfs.h> +#include <linux/hwmon-sysfs.h> +#include <linux/err.h> +#include <linux/mutex.h> +#include <linux/list.h> +#include <linux/platform_device.h> +#include <linux/cpu.h> +#include <asm/msr.h> +#include <asm/processor.h> + +#define DRVNAME "via_cputemp" + +enum { SHOW_TEMP, SHOW_LABEL, SHOW_NAME } SHOW; + +/* + * Functions declaration + */ + +struct via_cputemp_data { + struct device *hwmon_dev; + const char *name; + u32 id; + u32 msr; +}; + +/* + * Sysfs stuff + */ + +static ssize_t show_name(struct device *dev, struct device_attribute + *devattr, char *buf) +{ + int ret; + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct via_cputemp_data *data = dev_get_drvdata(dev); + + if (attr->index == SHOW_NAME) + ret = sprintf(buf, "%s\n", data->name); + else /* show label */ + ret = sprintf(buf, "Core %d\n", data->id); + return ret; +} + +static ssize_t show_temp(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + struct via_cputemp_data *data = dev_get_drvdata(dev); + u32 eax, edx; + int err; + + err = rdmsr_safe_on_cpu(data->id, data->msr, &eax, &edx); + if (err) + return -EAGAIN; + + return sprintf(buf, "%lu\n", ((unsigned long)eax & 0xffffff) * 1000); +} + +static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, + SHOW_TEMP); +static SENSOR_DEVICE_ATTR(temp1_label, S_IRUGO, show_name, NULL, SHOW_LABEL); +static SENSOR_DEVICE_ATTR(name, S_IRUGO, show_name, NULL, SHOW_NAME); + +static struct attribute *via_cputemp_attributes[] = { + &sensor_dev_attr_name.dev_attr.attr, + &sensor_dev_attr_temp1_label.dev_attr.attr, + &sensor_dev_attr_temp1_input.dev_attr.attr, + NULL +}; + +static const struct attribute_group via_cputemp_group = { + .attrs = via_cputemp_attributes, +}; + +static int __devinit via_cputemp_probe(struct platform_device *pdev) +{ + struct via_cputemp_data *data; + struct cpuinfo_x86 *c = &cpu_data(pdev->id); + int err; + u32 eax, edx; + + data = kzalloc(sizeof(struct via_cputemp_data), GFP_KERNEL); + if (!data) { + err = -ENOMEM; + dev_err(&pdev->dev, "Out of memory\n"); + goto exit; + } + + data->id = pdev->id; + data->name = "via_cputemp"; + + switch (c->x86_model) { + case 0xA: + /* C7 A */ + case 0xD: + /* C7 D */ + data->msr = 0x1169; + break; + case 0xF: + /* Nano */ + data->msr = 0x1423; + break; + default: + err = -ENODEV; + goto exit_free; + } + + /* test if we can access the TEMPERATURE MSR */ + err = rdmsr_safe_on_cpu(data->id, data->msr, &eax, &edx); + if (err) { + dev_err(&pdev->dev, + "Unable to access TEMPERATURE MSR, giving up\n"); + goto exit_free; + } + + platform_set_drvdata(pdev, data); + + err = sysfs_create_group(&pdev->dev.kobj, &via_cputemp_group); + if (err) + goto exit_free; + + data->hwmon_dev = hwmon_device_register(&pdev->dev); + if (IS_ERR(data->hwmon_dev)) { + err = PTR_ERR(data->hwmon_dev); + dev_err(&pdev->dev, "Class registration failed (%d)\n", + err); + goto exit_remove; + } + + return 0; + +exit_remove: + sysfs_remove_group(&pdev->dev.kobj, &via_cputemp_group); +exit_free: + platform_set_drvdata(pdev, NULL); + kfree(data); +exit: + return err; +} + +static int __devexit via_cputemp_remove(struct platform_device *pdev) +{ + struct via_cputemp_data *data = platform_get_drvdata(pdev); + + hwmon_device_unregister(data->hwmon_dev); + sysfs_remove_group(&pdev->dev.kobj, &via_cputemp_group); + platform_set_drvdata(pdev, NULL); + kfree(data); + return 0; +} + +static struct platform_driver via_cputemp_driver = { + .driver = { + .owner = THIS_MODULE, + .name = DRVNAME, + }, + .probe = via_cputemp_probe, + .remove = __devexit_p(via_cputemp_remove), +}; + +struct pdev_entry { + struct list_head list; + struct platform_device *pdev; + unsigned int cpu; +}; + +static LIST_HEAD(pdev_list); +static DEFINE_MUTEX(pdev_list_mutex); + +static int __cpuinit via_cputemp_device_add(unsigned int cpu) +{ + int err; + struct platform_device *pdev; + struct pdev_entry *pdev_entry; + + pdev = platform_device_alloc(DRVNAME, cpu); + if (!pdev) { + err = -ENOMEM; + printk(KERN_ERR DRVNAME ": Device allocation failed\n"); + goto exit; + } + + pdev_entry = kzalloc(sizeof(struct pdev_entry), GFP_KERNEL); + if (!pdev_entry) { + err = -ENOMEM; + goto exit_device_put; + } + + err = platform_device_add(pdev); + if (err) { + printk(KERN_ERR DRVNAME ": Device addition failed (%d)\n", + err); + goto exit_device_free; + } + + pdev_entry->pdev = pdev; + pdev_entry->cpu = cpu; + mutex_lock(&pdev_list_mutex); + list_add_tail(&pdev_entry->list, &pdev_list); + mutex_unlock(&pdev_list_mutex); + + return 0; + +exit_device_free: + kfree(pdev_entry); +exit_device_put: + platform_device_put(pdev); +exit: + return err; +} + +#ifdef CONFIG_HOTPLUG_CPU +static void via_cputemp_device_remove(unsigned int cpu) +{ + struct pdev_entry *p, *n; + mutex_lock(&pdev_list_mutex); + list_for_each_entry_safe(p, n, &pdev_list, list) { + if (p->cpu == cpu) { + platform_device_unregister(p->pdev); + list_del(&p->list); + kfree(p); + } + } + mutex_unlock(&pdev_list_mutex); +} + +static int __cpuinit via_cputemp_cpu_callback(struct notifier_block *nfb, + unsigned long action, void *hcpu) +{ + unsigned int cpu = (unsigned long) hcpu; + + switch (action) { + case CPU_ONLINE: + case CPU_DOWN_FAILED: + via_cputemp_device_add(cpu); + break; + case CPU_DOWN_PREPARE: + via_cputemp_device_remove(cpu); + break; + } + return NOTIFY_OK; +} + +static struct notifier_block via_cputemp_cpu_notifier __refdata = { + .notifier_call = via_cputemp_cpu_callback, +}; +#endif /* !CONFIG_HOTPLUG_CPU */ + +static int __init via_cputemp_init(void) +{ + int i, err; + struct pdev_entry *p, *n; + + if (cpu_data(0).x86_vendor != X86_VENDOR_CENTAUR) { + printk(KERN_DEBUG DRVNAME ": Not a VIA CPU\n"); + err = -ENODEV; + goto exit; + } + + err = platform_driver_register(&via_cputemp_driver); + if (err) + goto exit; + + for_each_online_cpu(i) { + struct cpuinfo_x86 *c = &cpu_data(i); + + if (c->x86 != 6) + continue; + + if (c->x86_model < 0x0a) + continue; + + if (c->x86_model > 0x0f) { + printk(KERN_WARNING DRVNAME ": Unknown CPU " + "model 0x%x\n", c->x86_model); + continue; + } + + err = via_cputemp_device_add(i); + if (err) + goto exit_devices_unreg; + } + if (list_empty(&pdev_list)) { + err = -ENODEV; + goto exit_driver_unreg; + } + +#ifdef CONFIG_HOTPLUG_CPU + register_hotcpu_notifier(&via_cputemp_cpu_notifier); +#endif + return 0; + +exit_devices_unreg: + mutex_lock(&pdev_list_mutex); + list_for_each_entry_safe(p, n, &pdev_list, list) { + platform_device_unregister(p->pdev); + list_del(&p->list); + kfree(p); + } + mutex_unlock(&pdev_list_mutex); +exit_driver_unreg: + platform_driver_unregister(&via_cputemp_driver); +exit: + return err; +} + +static void __exit via_cputemp_exit(void) +{ + struct pdev_entry *p, *n; +#ifdef CONFIG_HOTPLUG_CPU + unregister_hotcpu_notifier(&via_cputemp_cpu_notifier); +#endif + mutex_lock(&pdev_list_mutex); + list_for_each_entry_safe(p, n, &pdev_list, list) { + platform_device_unregister(p->pdev); + list_del(&p->list); + kfree(p); + } + mutex_unlock(&pdev_list_mutex); + platform_driver_unregister(&via_cputemp_driver); +} + +MODULE_AUTHOR("Harald Welte <HaraldWelte@viatech.com>"); +MODULE_DESCRIPTION("VIA CPU temperature monitor"); +MODULE_LICENSE("GPL"); + +module_init(via_cputemp_init) +module_exit(via_cputemp_exit) diff --git a/drivers/hwmon/w83627hf.c b/drivers/hwmon/w83627hf.c index b257c7223733..38e280523071 100644 --- a/drivers/hwmon/w83627hf.c +++ b/drivers/hwmon/w83627hf.c @@ -1135,6 +1135,7 @@ static int __init w83627hf_find(int sioaddr, unsigned short *addr, "W83687THF", }; + sio_data->sioaddr = sioaddr; superio_enter(sio_data); val = force_id ? force_id : superio_inb(sio_data, DEVID); switch (val) { @@ -1177,7 +1178,6 @@ static int __init w83627hf_find(int sioaddr, unsigned short *addr, } err = 0; - sio_data->sioaddr = sioaddr; pr_info(DRVNAME ": Found %s chip at %#x\n", names[sio_data->type], *addr); diff --git a/drivers/idle/i7300_idle.c b/drivers/idle/i7300_idle.c index 1f20a042a4f5..dd253002cd50 100644 --- a/drivers/idle/i7300_idle.c +++ b/drivers/idle/i7300_idle.c @@ -81,7 +81,7 @@ static u8 i7300_idle_thrtctl_saved; static u8 i7300_idle_thrtlow_saved; static u32 i7300_idle_mc_saved; -static cpumask_t idle_cpumask; +static cpumask_var_t idle_cpumask; static ktime_t start_ktime; static unsigned long avg_idle_us; @@ -459,9 +459,9 @@ static int i7300_idle_notifier(struct notifier_block *nb, unsigned long val, spin_lock_irqsave(&i7300_idle_lock, flags); if (val == IDLE_START) { - cpu_set(smp_processor_id(), idle_cpumask); + cpumask_set_cpu(smp_processor_id(), idle_cpumask); - if (cpus_weight(idle_cpumask) != num_online_cpus()) + if (cpumask_weight(idle_cpumask) != num_online_cpus()) goto end; now_ktime = ktime_get(); @@ -478,8 +478,8 @@ static int i7300_idle_notifier(struct notifier_block *nb, unsigned long val, i7300_idle_ioat_start(); } else if (val == IDLE_END) { - cpu_clear(smp_processor_id(), idle_cpumask); - if (cpus_weight(idle_cpumask) == (num_online_cpus() - 1)) { + cpumask_clear_cpu(smp_processor_id(), idle_cpumask); + if (cpumask_weight(idle_cpumask) == (num_online_cpus() - 1)) { /* First CPU coming out of idle */ u64 idle_duration_us; @@ -553,7 +553,6 @@ struct debugfs_file_info { static int __init i7300_idle_init(void) { spin_lock_init(&i7300_idle_lock); - cpus_clear(idle_cpumask); total_us = 0; if (i7300_idle_platform_probe(&fbd_dev, &ioat_dev, forceload)) @@ -565,6 +564,9 @@ static int __init i7300_idle_init(void) if (i7300_idle_ioat_init()) return -ENODEV; + if (!zalloc_cpumask_var(&idle_cpumask, GFP_KERNEL)) + return -ENOMEM; + debugfs_dir = debugfs_create_dir("i7300_idle", NULL); if (debugfs_dir) { int i = 0; @@ -589,6 +591,7 @@ static int __init i7300_idle_init(void) static void __exit i7300_idle_exit(void) { idle_notifier_unregister(&i7300_idle_nb); + free_cpumask_var(idle_cpumask); if (debugfs_dir) { int i = 0; diff --git a/drivers/infiniband/hw/cxgb3/cxio_hal.h b/drivers/infiniband/hw/cxgb3/cxio_hal.h index bfd03bf8be54..f3d440cc68f2 100644 --- a/drivers/infiniband/hw/cxgb3/cxio_hal.h +++ b/drivers/infiniband/hw/cxgb3/cxio_hal.h @@ -34,6 +34,7 @@ #include <linux/list.h> #include <linux/mutex.h> +#include <linux/kfifo.h> #include "t3_cpl.h" #include "t3cdev.h" @@ -75,13 +76,13 @@ struct cxio_hal_ctrl_qp { }; struct cxio_hal_resource { - struct kfifo *tpt_fifo; + struct kfifo tpt_fifo; spinlock_t tpt_fifo_lock; - struct kfifo *qpid_fifo; + struct kfifo qpid_fifo; spinlock_t qpid_fifo_lock; - struct kfifo *cqid_fifo; + struct kfifo cqid_fifo; spinlock_t cqid_fifo_lock; - struct kfifo *pdid_fifo; + struct kfifo pdid_fifo; spinlock_t pdid_fifo_lock; }; diff --git a/drivers/infiniband/hw/cxgb3/cxio_resource.c b/drivers/infiniband/hw/cxgb3/cxio_resource.c index bd233c087653..31f9201b2980 100644 --- a/drivers/infiniband/hw/cxgb3/cxio_resource.c +++ b/drivers/infiniband/hw/cxgb3/cxio_resource.c @@ -39,12 +39,12 @@ #include "cxio_resource.h" #include "cxio_hal.h" -static struct kfifo *rhdl_fifo; +static struct kfifo rhdl_fifo; static spinlock_t rhdl_fifo_lock; #define RANDOM_SIZE 16 -static int __cxio_init_resource_fifo(struct kfifo **fifo, +static int __cxio_init_resource_fifo(struct kfifo *fifo, spinlock_t *fifo_lock, u32 nr, u32 skip_low, u32 skip_high, @@ -55,12 +55,11 @@ static int __cxio_init_resource_fifo(struct kfifo **fifo, u32 rarray[16]; spin_lock_init(fifo_lock); - *fifo = kfifo_alloc(nr * sizeof(u32), GFP_KERNEL, fifo_lock); - if (IS_ERR(*fifo)) + if (kfifo_alloc(fifo, nr * sizeof(u32), GFP_KERNEL)) return -ENOMEM; for (i = 0; i < skip_low + skip_high; i++) - __kfifo_put(*fifo, (unsigned char *) &entry, sizeof(u32)); + kfifo_in(fifo, (unsigned char *) &entry, sizeof(u32)); if (random) { j = 0; random_bytes = random32(); @@ -72,33 +71,35 @@ static int __cxio_init_resource_fifo(struct kfifo **fifo, random_bytes = random32(); } idx = (random_bytes >> (j * 2)) & 0xF; - __kfifo_put(*fifo, + kfifo_in(fifo, (unsigned char *) &rarray[idx], sizeof(u32)); rarray[idx] = i; j++; } for (i = 0; i < RANDOM_SIZE; i++) - __kfifo_put(*fifo, + kfifo_in(fifo, (unsigned char *) &rarray[i], sizeof(u32)); } else for (i = skip_low; i < nr - skip_high; i++) - __kfifo_put(*fifo, (unsigned char *) &i, sizeof(u32)); + kfifo_in(fifo, (unsigned char *) &i, sizeof(u32)); for (i = 0; i < skip_low + skip_high; i++) - kfifo_get(*fifo, (unsigned char *) &entry, sizeof(u32)); + if (kfifo_out_locked(fifo, (unsigned char *) &entry, + sizeof(u32), fifo_lock) != sizeof(u32)) + break; return 0; } -static int cxio_init_resource_fifo(struct kfifo **fifo, spinlock_t * fifo_lock, +static int cxio_init_resource_fifo(struct kfifo *fifo, spinlock_t * fifo_lock, u32 nr, u32 skip_low, u32 skip_high) { return (__cxio_init_resource_fifo(fifo, fifo_lock, nr, skip_low, skip_high, 0)); } -static int cxio_init_resource_fifo_random(struct kfifo **fifo, +static int cxio_init_resource_fifo_random(struct kfifo *fifo, spinlock_t * fifo_lock, u32 nr, u32 skip_low, u32 skip_high) { @@ -113,15 +114,13 @@ static int cxio_init_qpid_fifo(struct cxio_rdev *rdev_p) spin_lock_init(&rdev_p->rscp->qpid_fifo_lock); - rdev_p->rscp->qpid_fifo = kfifo_alloc(T3_MAX_NUM_QP * sizeof(u32), - GFP_KERNEL, - &rdev_p->rscp->qpid_fifo_lock); - if (IS_ERR(rdev_p->rscp->qpid_fifo)) + if (kfifo_alloc(&rdev_p->rscp->qpid_fifo, T3_MAX_NUM_QP * sizeof(u32), + GFP_KERNEL)) return -ENOMEM; for (i = 16; i < T3_MAX_NUM_QP; i++) if (!(i & rdev_p->qpmask)) - __kfifo_put(rdev_p->rscp->qpid_fifo, + kfifo_in(&rdev_p->rscp->qpid_fifo, (unsigned char *) &i, sizeof(u32)); return 0; } @@ -134,7 +133,7 @@ int cxio_hal_init_rhdl_resource(u32 nr_rhdl) void cxio_hal_destroy_rhdl_resource(void) { - kfifo_free(rhdl_fifo); + kfifo_free(&rhdl_fifo); } /* nr_* must be power of 2 */ @@ -167,11 +166,11 @@ int cxio_hal_init_resource(struct cxio_rdev *rdev_p, goto pdid_err; return 0; pdid_err: - kfifo_free(rscp->cqid_fifo); + kfifo_free(&rscp->cqid_fifo); cqid_err: - kfifo_free(rscp->qpid_fifo); + kfifo_free(&rscp->qpid_fifo); qpid_err: - kfifo_free(rscp->tpt_fifo); + kfifo_free(&rscp->tpt_fifo); tpt_err: return -ENOMEM; } @@ -179,33 +178,37 @@ tpt_err: /* * returns 0 if no resource available */ -static u32 cxio_hal_get_resource(struct kfifo *fifo) +static u32 cxio_hal_get_resource(struct kfifo *fifo, spinlock_t * lock) { u32 entry; - if (kfifo_get(fifo, (unsigned char *) &entry, sizeof(u32))) + if (kfifo_out_locked(fifo, (unsigned char *) &entry, sizeof(u32), lock)) return entry; else return 0; /* fifo emptry */ } -static void cxio_hal_put_resource(struct kfifo *fifo, u32 entry) +static void cxio_hal_put_resource(struct kfifo *fifo, spinlock_t * lock, + u32 entry) { - BUG_ON(kfifo_put(fifo, (unsigned char *) &entry, sizeof(u32)) == 0); + BUG_ON( + kfifo_in_locked(fifo, (unsigned char *) &entry, sizeof(u32), lock) + == 0); } u32 cxio_hal_get_stag(struct cxio_hal_resource *rscp) { - return cxio_hal_get_resource(rscp->tpt_fifo); + return cxio_hal_get_resource(&rscp->tpt_fifo, &rscp->tpt_fifo_lock); } void cxio_hal_put_stag(struct cxio_hal_resource *rscp, u32 stag) { - cxio_hal_put_resource(rscp->tpt_fifo, stag); + cxio_hal_put_resource(&rscp->tpt_fifo, &rscp->tpt_fifo_lock, stag); } u32 cxio_hal_get_qpid(struct cxio_hal_resource *rscp) { - u32 qpid = cxio_hal_get_resource(rscp->qpid_fifo); + u32 qpid = cxio_hal_get_resource(&rscp->qpid_fifo, + &rscp->qpid_fifo_lock); PDBG("%s qpid 0x%x\n", __func__, qpid); return qpid; } @@ -213,35 +216,35 @@ u32 cxio_hal_get_qpid(struct cxio_hal_resource *rscp) void cxio_hal_put_qpid(struct cxio_hal_resource *rscp, u32 qpid) { PDBG("%s qpid 0x%x\n", __func__, qpid); - cxio_hal_put_resource(rscp->qpid_fifo, qpid); + cxio_hal_put_resource(&rscp->qpid_fifo, &rscp->qpid_fifo_lock, qpid); } u32 cxio_hal_get_cqid(struct cxio_hal_resource *rscp) { - return cxio_hal_get_resource(rscp->cqid_fifo); + return cxio_hal_get_resource(&rscp->cqid_fifo, &rscp->cqid_fifo_lock); } void cxio_hal_put_cqid(struct cxio_hal_resource *rscp, u32 cqid) { - cxio_hal_put_resource(rscp->cqid_fifo, cqid); + cxio_hal_put_resource(&rscp->cqid_fifo, &rscp->cqid_fifo_lock, cqid); } u32 cxio_hal_get_pdid(struct cxio_hal_resource *rscp) { - return cxio_hal_get_resource(rscp->pdid_fifo); + return cxio_hal_get_resource(&rscp->pdid_fifo, &rscp->pdid_fifo_lock); } void cxio_hal_put_pdid(struct cxio_hal_resource *rscp, u32 pdid) { - cxio_hal_put_resource(rscp->pdid_fifo, pdid); + cxio_hal_put_resource(&rscp->pdid_fifo, &rscp->pdid_fifo_lock, pdid); } void cxio_hal_destroy_resource(struct cxio_hal_resource *rscp) { - kfifo_free(rscp->tpt_fifo); - kfifo_free(rscp->cqid_fifo); - kfifo_free(rscp->qpid_fifo); - kfifo_free(rscp->pdid_fifo); + kfifo_free(&rscp->tpt_fifo); + kfifo_free(&rscp->cqid_fifo); + kfifo_free(&rscp->qpid_fifo); + kfifo_free(&rscp->pdid_fifo); kfree(rscp); } diff --git a/drivers/isdn/mISDN/l1oip_core.c b/drivers/isdn/mISDN/l1oip_core.c index 7e5f30dbc0a0..f1e8af54dff0 100644 --- a/drivers/isdn/mISDN/l1oip_core.c +++ b/drivers/isdn/mISDN/l1oip_core.c @@ -661,7 +661,7 @@ l1oip_socket_thread(void *data) size_t recvbuf_size = 1500; int recvlen; struct socket *socket = NULL; - DECLARE_COMPLETION(wait); + DECLARE_COMPLETION_ONSTACK(wait); /* allocate buffer memory */ recvbuf = kmalloc(recvbuf_size, GFP_KERNEL); diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig index e4f599f20e38..8a0e1ec95e4a 100644 --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig @@ -229,6 +229,12 @@ config LEDS_PWM help This option enables support for pwm driven LEDs +config LEDS_REGULATOR + tristate "REGULATOR driven LED support" + depends on LEDS_CLASS && REGULATOR + help + This option enables support for regulator driven LEDs. + config LEDS_BD2802 tristate "LED driver for BD2802 RGB LED" depends on LEDS_CLASS && I2C @@ -236,6 +242,33 @@ config LEDS_BD2802 This option enables support for BD2802GU RGB LED driver chips accessed via the I2C bus. +config LEDS_INTEL_SS4200 + tristate "LED driver for Intel NAS SS4200 series" + depends on LEDS_CLASS && PCI && DMI + help + This option enables support for the Intel SS4200 series of + Network Attached Storage servers. You may control the hard + drive or power LEDs on the front panel. Using this driver + can stop the front LED from blinking after startup. + +config LEDS_LT3593 + tristate "LED driver for LT3593 controllers" + depends on LEDS_CLASS && GENERIC_GPIO + help + This option enables support for LEDs driven by a Linear Technology + LT3593 controller. This controller uses a special one-wire pulse + coding protocol to set the brightness. + +config LEDS_ADP5520 + tristate "LED Support for ADP5520/ADP5501 PMIC" + depends on LEDS_CLASS && PMIC_ADP5520 + help + This option enables support for on-chip LED drivers found + on Analog Devices ADP5520/ADP5501 PMICs. + + To compile this driver as a module, choose M here: the module will + be called leds-adp5520. + comment "LED Triggers" config LEDS_TRIGGERS diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile index 46d72704d606..9e63869d7c0d 100644 --- a/drivers/leds/Makefile +++ b/drivers/leds/Makefile @@ -29,6 +29,10 @@ obj-$(CONFIG_LEDS_DA903X) += leds-da903x.o obj-$(CONFIG_LEDS_WM831X_STATUS) += leds-wm831x-status.o obj-$(CONFIG_LEDS_WM8350) += leds-wm8350.o obj-$(CONFIG_LEDS_PWM) += leds-pwm.o +obj-$(CONFIG_LEDS_REGULATOR) += leds-regulator.o +obj-$(CONFIG_LEDS_INTEL_SS4200) += leds-ss4200.o +obj-$(CONFIG_LEDS_LT3593) += leds-lt3593.o +obj-$(CONFIG_LEDS_ADP5520) += leds-adp5520.o # LED SPI Drivers obj-$(CONFIG_LEDS_DAC124S085) += leds-dac124s085.o diff --git a/drivers/leds/leds-adp5520.c b/drivers/leds/leds-adp5520.c new file mode 100644 index 000000000000..a8f315902131 --- /dev/null +++ b/drivers/leds/leds-adp5520.c @@ -0,0 +1,230 @@ +/* + * LEDs driver for Analog Devices ADP5520/ADP5501 MFD PMICs + * + * Copyright 2009 Analog Devices Inc. + * + * Loosely derived from leds-da903x: + * Copyright (C) 2008 Compulab, Ltd. + * Mike Rapoport <mike@compulab.co.il> + * + * Copyright (C) 2006-2008 Marvell International Ltd. + * Eric Miao <eric.miao@marvell.com> + * + * Licensed under the GPL-2 or later. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/leds.h> +#include <linux/workqueue.h> +#include <linux/mfd/adp5520.h> + +struct adp5520_led { + struct led_classdev cdev; + struct work_struct work; + struct device *master; + enum led_brightness new_brightness; + int id; + int flags; +}; + +static void adp5520_led_work(struct work_struct *work) +{ + struct adp5520_led *led = container_of(work, struct adp5520_led, work); + adp5520_write(led->master, ADP5520_LED1_CURRENT + led->id - 1, + led->new_brightness >> 2); +} + +static void adp5520_led_set(struct led_classdev *led_cdev, + enum led_brightness value) +{ + struct adp5520_led *led; + + led = container_of(led_cdev, struct adp5520_led, cdev); + led->new_brightness = value; + schedule_work(&led->work); +} + +static int adp5520_led_setup(struct adp5520_led *led) +{ + struct device *dev = led->master; + int flags = led->flags; + int ret = 0; + + switch (led->id) { + case FLAG_ID_ADP5520_LED1_ADP5501_LED0: + ret |= adp5520_set_bits(dev, ADP5520_LED_TIME, + (flags >> ADP5520_FLAG_OFFT_SHIFT) & + ADP5520_FLAG_OFFT_MASK); + ret |= adp5520_set_bits(dev, ADP5520_LED_CONTROL, + ADP5520_LED1_EN); + break; + case FLAG_ID_ADP5520_LED2_ADP5501_LED1: + ret |= adp5520_set_bits(dev, ADP5520_LED_TIME, + ((flags >> ADP5520_FLAG_OFFT_SHIFT) & + ADP5520_FLAG_OFFT_MASK) << 2); + ret |= adp5520_clr_bits(dev, ADP5520_LED_CONTROL, + ADP5520_R3_MODE); + ret |= adp5520_set_bits(dev, ADP5520_LED_CONTROL, + ADP5520_LED2_EN); + break; + case FLAG_ID_ADP5520_LED3_ADP5501_LED2: + ret |= adp5520_set_bits(dev, ADP5520_LED_TIME, + ((flags >> ADP5520_FLAG_OFFT_SHIFT) & + ADP5520_FLAG_OFFT_MASK) << 4); + ret |= adp5520_clr_bits(dev, ADP5520_LED_CONTROL, + ADP5520_C3_MODE); + ret |= adp5520_set_bits(dev, ADP5520_LED_CONTROL, + ADP5520_LED3_EN); + break; + } + + return ret; +} + +static int __devinit adp5520_led_prepare(struct platform_device *pdev) +{ + struct adp5520_leds_platform_data *pdata = pdev->dev.platform_data; + struct device *dev = pdev->dev.parent; + int ret = 0; + + ret |= adp5520_write(dev, ADP5520_LED1_CURRENT, 0); + ret |= adp5520_write(dev, ADP5520_LED2_CURRENT, 0); + ret |= adp5520_write(dev, ADP5520_LED3_CURRENT, 0); + ret |= adp5520_write(dev, ADP5520_LED_TIME, pdata->led_on_time << 6); + ret |= adp5520_write(dev, ADP5520_LED_FADE, FADE_VAL(pdata->fade_in, + pdata->fade_out)); + + return ret; +} + +static int __devinit adp5520_led_probe(struct platform_device *pdev) +{ + struct adp5520_leds_platform_data *pdata = pdev->dev.platform_data; + struct adp5520_led *led, *led_dat; + struct led_info *cur_led; + int ret, i; + + if (pdata == NULL) { + dev_err(&pdev->dev, "missing platform data\n"); + return -ENODEV; + } + + if (pdata->num_leds > ADP5520_01_MAXLEDS) { + dev_err(&pdev->dev, "can't handle more than %d LEDS\n", + ADP5520_01_MAXLEDS); + return -EFAULT; + } + + led = kzalloc(sizeof(*led) * pdata->num_leds, GFP_KERNEL); + if (led == NULL) { + dev_err(&pdev->dev, "failed to alloc memory\n"); + return -ENOMEM; + } + + ret = adp5520_led_prepare(pdev); + + if (ret) { + dev_err(&pdev->dev, "failed to write\n"); + goto err_free; + } + + for (i = 0; i < pdata->num_leds; ++i) { + cur_led = &pdata->leds[i]; + led_dat = &led[i]; + + led_dat->cdev.name = cur_led->name; + led_dat->cdev.default_trigger = cur_led->default_trigger; + led_dat->cdev.brightness_set = adp5520_led_set; + led_dat->cdev.brightness = LED_OFF; + + if (cur_led->flags & ADP5520_FLAG_LED_MASK) + led_dat->flags = cur_led->flags; + else + led_dat->flags = i + 1; + + led_dat->id = led_dat->flags & ADP5520_FLAG_LED_MASK; + + led_dat->master = pdev->dev.parent; + led_dat->new_brightness = LED_OFF; + + INIT_WORK(&led_dat->work, adp5520_led_work); + + ret = led_classdev_register(led_dat->master, &led_dat->cdev); + if (ret) { + dev_err(&pdev->dev, "failed to register LED %d\n", + led_dat->id); + goto err; + } + + ret = adp5520_led_setup(led_dat); + if (ret) { + dev_err(&pdev->dev, "failed to write\n"); + i++; + goto err; + } + } + + platform_set_drvdata(pdev, led); + return 0; + +err: + if (i > 0) { + for (i = i - 1; i >= 0; i--) { + led_classdev_unregister(&led[i].cdev); + cancel_work_sync(&led[i].work); + } + } + +err_free: + kfree(led); + return ret; +} + +static int __devexit adp5520_led_remove(struct platform_device *pdev) +{ + struct adp5520_leds_platform_data *pdata = pdev->dev.platform_data; + struct adp5520_led *led; + int i; + + led = platform_get_drvdata(pdev); + + adp5520_clr_bits(led->master, ADP5520_LED_CONTROL, + ADP5520_LED1_EN | ADP5520_LED2_EN | ADP5520_LED3_EN); + + for (i = 0; i < pdata->num_leds; i++) { + led_classdev_unregister(&led[i].cdev); + cancel_work_sync(&led[i].work); + } + + kfree(led); + return 0; +} + +static struct platform_driver adp5520_led_driver = { + .driver = { + .name = "adp5520-led", + .owner = THIS_MODULE, + }, + .probe = adp5520_led_probe, + .remove = __devexit_p(adp5520_led_remove), +}; + +static int __init adp5520_led_init(void) +{ + return platform_driver_register(&adp5520_led_driver); +} +module_init(adp5520_led_init); + +static void __exit adp5520_led_exit(void) +{ + platform_driver_unregister(&adp5520_led_driver); +} +module_exit(adp5520_led_exit); + +MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>"); +MODULE_DESCRIPTION("LEDS ADP5520(01) Driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:adp5520-led"); diff --git a/drivers/leds/leds-alix2.c b/drivers/leds/leds-alix2.c index 731d4eef3425..f59ffadf5125 100644 --- a/drivers/leds/leds-alix2.c +++ b/drivers/leds/leds-alix2.c @@ -11,11 +11,24 @@ #include <linux/module.h> #include <linux/platform_device.h> #include <linux/string.h> +#include <linux/pci.h> static int force = 0; module_param(force, bool, 0444); MODULE_PARM_DESC(force, "Assume system has ALIX.2/ALIX.3 style LEDs"); +#define MSR_LBAR_GPIO 0x5140000C +#define CS5535_GPIO_SIZE 256 + +static u32 gpio_base; + +static struct pci_device_id divil_pci[] = { + { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_CS5535_ISA) }, + { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA) }, + { } /* NULL entry */ +}; +MODULE_DEVICE_TABLE(pci, divil_pci); + struct alix_led { struct led_classdev cdev; unsigned short port; @@ -30,9 +43,9 @@ static void alix_led_set(struct led_classdev *led_cdev, container_of(led_cdev, struct alix_led, cdev); if (brightness) - outl(led_dev->on_value, led_dev->port); + outl(led_dev->on_value, gpio_base + led_dev->port); else - outl(led_dev->off_value, led_dev->port); + outl(led_dev->off_value, gpio_base + led_dev->port); } static struct alix_led alix_leds[] = { @@ -41,7 +54,7 @@ static struct alix_led alix_leds[] = { .name = "alix:1", .brightness_set = alix_led_set, }, - .port = 0x6100, + .port = 0x00, .on_value = 1 << 22, .off_value = 1 << 6, }, @@ -50,7 +63,7 @@ static struct alix_led alix_leds[] = { .name = "alix:2", .brightness_set = alix_led_set, }, - .port = 0x6180, + .port = 0x80, .on_value = 1 << 25, .off_value = 1 << 9, }, @@ -59,7 +72,7 @@ static struct alix_led alix_leds[] = { .name = "alix:3", .brightness_set = alix_led_set, }, - .port = 0x6180, + .port = 0x80, .on_value = 1 << 27, .off_value = 1 << 11, }, @@ -101,64 +114,104 @@ static struct platform_driver alix_led_driver = { }, }; -static int __init alix_present(void) +static int __init alix_present(unsigned long bios_phys, + const char *alix_sig, + size_t alix_sig_len) { - const unsigned long bios_phys = 0x000f0000; const size_t bios_len = 0x00010000; - const char alix_sig[] = "PC Engines ALIX."; - const size_t alix_sig_len = sizeof(alix_sig) - 1; - const char *bios_virt; const char *scan_end; const char *p; - int ret = 0; + char name[64]; if (force) { printk(KERN_NOTICE "%s: forced to skip BIOS test, " "assume system has ALIX.2 style LEDs\n", KBUILD_MODNAME); - ret = 1; - goto out; + return 1; } bios_virt = phys_to_virt(bios_phys); scan_end = bios_virt + bios_len - (alix_sig_len + 2); for (p = bios_virt; p < scan_end; p++) { const char *tail; + char *a; - if (memcmp(p, alix_sig, alix_sig_len) != 0) { + if (memcmp(p, alix_sig, alix_sig_len) != 0) continue; - } + + memcpy(name, p, sizeof(name)); + + /* remove the first \0 character from string */ + a = strchr(name, '\0'); + if (a) + *a = ' '; + + /* cut the string at a newline */ + a = strchr(name, '\r'); + if (a) + *a = '\0'; tail = p + alix_sig_len; - if ((tail[0] == '2' || tail[0] == '3') && tail[1] == '\0') { + if ((tail[0] == '2' || tail[0] == '3')) { printk(KERN_INFO "%s: system is recognized as \"%s\"\n", - KBUILD_MODNAME, p); - ret = 1; - break; + KBUILD_MODNAME, name); + return 1; } } -out: - return ret; + return 0; } static struct platform_device *pdev; -static int __init alix_led_init(void) +static int __init alix_pci_led_init(void) { - int ret; + u32 low, hi; - if (!alix_present()) { - ret = -ENODEV; - goto out; + if (pci_dev_present(divil_pci) == 0) { + printk(KERN_WARNING KBUILD_MODNAME": DIVIL not found\n"); + return -ENODEV; } - /* enable output on GPIO for LED 1,2,3 */ - outl(1 << 6, 0x6104); - outl(1 << 9, 0x6184); - outl(1 << 11, 0x6184); + /* Grab the GPIO I/O range */ + rdmsr(MSR_LBAR_GPIO, low, hi); + + /* Check the mask and whether GPIO is enabled (sanity check) */ + if (hi != 0x0000f001) { + printk(KERN_WARNING KBUILD_MODNAME": GPIO not enabled\n"); + return -ENODEV; + } + + /* Mask off the IO base address */ + gpio_base = low & 0x0000ff00; + + if (!request_region(gpio_base, CS5535_GPIO_SIZE, KBUILD_MODNAME)) { + printk(KERN_ERR KBUILD_MODNAME": can't allocate I/O for GPIO\n"); + return -ENODEV; + } + + /* Set GPIO function to output */ + outl(1 << 6, gpio_base + 0x04); + outl(1 << 9, gpio_base + 0x84); + outl(1 << 11, gpio_base + 0x84); + + return 0; +} + +static int __init alix_led_init(void) +{ + int ret = -ENODEV; + const char tinybios_sig[] = "PC Engines ALIX."; + const char coreboot_sig[] = "PC Engines\0ALIX."; + + if (alix_present(0xf0000, tinybios_sig, sizeof(tinybios_sig) - 1) || + alix_present(0x500, coreboot_sig, sizeof(coreboot_sig) - 1)) + ret = alix_pci_led_init(); + + if (ret < 0) + return ret; pdev = platform_device_register_simple(KBUILD_MODNAME, -1, NULL, 0); if (!IS_ERR(pdev)) { @@ -168,7 +221,6 @@ static int __init alix_led_init(void) } else ret = PTR_ERR(pdev); -out: return ret; } @@ -176,6 +228,7 @@ static void __exit alix_led_exit(void) { platform_device_unregister(pdev); platform_driver_unregister(&alix_led_driver); + release_region(gpio_base, CS5535_GPIO_SIZE); } module_init(alix_led_init); diff --git a/drivers/leds/leds-cobalt-qube.c b/drivers/leds/leds-cobalt-qube.c index 8816806accd2..da5fb016b1a5 100644 --- a/drivers/leds/leds-cobalt-qube.c +++ b/drivers/leds/leds-cobalt-qube.c @@ -31,7 +31,7 @@ static struct led_classdev qube_front_led = { .name = "qube::front", .brightness = LED_FULL, .brightness_set = qube_front_led_set, - .default_trigger = "ide-disk", + .default_trigger = "default-on", }; static int __devinit cobalt_qube_led_probe(struct platform_device *pdev) @@ -43,7 +43,7 @@ static int __devinit cobalt_qube_led_probe(struct platform_device *pdev) if (!res) return -EBUSY; - led_port = ioremap(res->start, res->end - res->start + 1); + led_port = ioremap(res->start, resource_size(res)); if (!led_port) return -ENOMEM; diff --git a/drivers/leds/leds-cobalt-raq.c b/drivers/leds/leds-cobalt-raq.c index defc212105f3..438d48384636 100644 --- a/drivers/leds/leds-cobalt-raq.c +++ b/drivers/leds/leds-cobalt-raq.c @@ -84,7 +84,7 @@ static int __devinit cobalt_raq_led_probe(struct platform_device *pdev) if (!res) return -EBUSY; - led_port = ioremap(res->start, res->end - res->start + 1); + led_port = ioremap(res->start, resource_size(res)); if (!led_port) return -ENOMEM; diff --git a/drivers/leds/leds-lt3593.c b/drivers/leds/leds-lt3593.c new file mode 100644 index 000000000000..fee40a841959 --- /dev/null +++ b/drivers/leds/leds-lt3593.c @@ -0,0 +1,217 @@ +/* + * LEDs driver for LT3593 controllers + * + * See the datasheet at http://cds.linear.com/docs/Datasheet/3593f.pdf + * + * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de> + * + * Based on leds-gpio.c, + * + * Copyright (C) 2007 8D Technologies inc. + * Raphael Assenat <raph@8d.com> + * Copyright (C) 2008 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/leds.h> +#include <linux/workqueue.h> +#include <linux/delay.h> +#include <linux/gpio.h> + +struct lt3593_led_data { + struct led_classdev cdev; + unsigned gpio; + struct work_struct work; + u8 new_level; +}; + +static void lt3593_led_work(struct work_struct *work) +{ + int pulses; + struct lt3593_led_data *led_dat = + container_of(work, struct lt3593_led_data, work); + + /* + * The LT3593 resets its internal current level register to the maximum + * level on the first falling edge on the control pin. Each following + * falling edge decreases the current level by 625uA. Up to 32 pulses + * can be sent, so the maximum power reduction is 20mA. + * After a timeout of 128us, the value is taken from the register and + * applied is to the output driver. + */ + + if (led_dat->new_level == 0) { + gpio_set_value_cansleep(led_dat->gpio, 0); + return; + } + + pulses = 32 - (led_dat->new_level * 32) / 255; + + if (pulses == 0) { + gpio_set_value_cansleep(led_dat->gpio, 0); + mdelay(1); + gpio_set_value_cansleep(led_dat->gpio, 1); + return; + } + + gpio_set_value_cansleep(led_dat->gpio, 1); + + while (pulses--) { + gpio_set_value_cansleep(led_dat->gpio, 0); + udelay(1); + gpio_set_value_cansleep(led_dat->gpio, 1); + udelay(1); + } +} + +static void lt3593_led_set(struct led_classdev *led_cdev, + enum led_brightness value) +{ + struct lt3593_led_data *led_dat = + container_of(led_cdev, struct lt3593_led_data, cdev); + + led_dat->new_level = value; + schedule_work(&led_dat->work); +} + +static int __devinit create_lt3593_led(const struct gpio_led *template, + struct lt3593_led_data *led_dat, struct device *parent) +{ + int ret, state; + + /* skip leds on GPIOs that aren't available */ + if (!gpio_is_valid(template->gpio)) { + printk(KERN_INFO "%s: skipping unavailable LT3593 LED at gpio %d (%s)\n", + KBUILD_MODNAME, template->gpio, template->name); + return 0; + } + + ret = gpio_request(template->gpio, template->name); + if (ret < 0) + return ret; + + led_dat->cdev.name = template->name; + led_dat->cdev.default_trigger = template->default_trigger; + led_dat->gpio = template->gpio; + + led_dat->cdev.brightness_set = lt3593_led_set; + + state = (template->default_state == LEDS_GPIO_DEFSTATE_ON); + led_dat->cdev.brightness = state ? LED_FULL : LED_OFF; + + if (!template->retain_state_suspended) + led_dat->cdev.flags |= LED_CORE_SUSPENDRESUME; + + ret = gpio_direction_output(led_dat->gpio, state); + if (ret < 0) + goto err; + + INIT_WORK(&led_dat->work, lt3593_led_work); + + ret = led_classdev_register(parent, &led_dat->cdev); + if (ret < 0) + goto err; + + printk(KERN_INFO "%s: registered LT3593 LED '%s' at GPIO %d\n", + KBUILD_MODNAME, template->name, template->gpio); + + return 0; + +err: + gpio_free(led_dat->gpio); + return ret; +} + +static void delete_lt3593_led(struct lt3593_led_data *led) +{ + if (!gpio_is_valid(led->gpio)) + return; + + led_classdev_unregister(&led->cdev); + cancel_work_sync(&led->work); + gpio_free(led->gpio); +} + +static int __devinit lt3593_led_probe(struct platform_device *pdev) +{ + struct gpio_led_platform_data *pdata = pdev->dev.platform_data; + struct lt3593_led_data *leds_data; + int i, ret = 0; + + if (!pdata) + return -EBUSY; + + leds_data = kzalloc(sizeof(struct lt3593_led_data) * pdata->num_leds, + GFP_KERNEL); + if (!leds_data) + return -ENOMEM; + + for (i = 0; i < pdata->num_leds; i++) { + ret = create_lt3593_led(&pdata->leds[i], &leds_data[i], + &pdev->dev); + if (ret < 0) + goto err; + } + + platform_set_drvdata(pdev, leds_data); + + return 0; + +err: + for (i = i - 1; i >= 0; i--) + delete_lt3593_led(&leds_data[i]); + + kfree(leds_data); + + return ret; +} + +static int __devexit lt3593_led_remove(struct platform_device *pdev) +{ + int i; + struct gpio_led_platform_data *pdata = pdev->dev.platform_data; + struct lt3593_led_data *leds_data; + + leds_data = platform_get_drvdata(pdev); + + for (i = 0; i < pdata->num_leds; i++) + delete_lt3593_led(&leds_data[i]); + + kfree(leds_data); + + return 0; +} + +static struct platform_driver lt3593_led_driver = { + .probe = lt3593_led_probe, + .remove = __devexit_p(lt3593_led_remove), + .driver = { + .name = "leds-lt3593", + .owner = THIS_MODULE, + }, +}; + +MODULE_ALIAS("platform:leds-lt3593"); + +static int __init lt3593_led_init(void) +{ + return platform_driver_register(<3593_led_driver); +} + +static void __exit lt3593_led_exit(void) +{ + platform_driver_unregister(<3593_led_driver); +} + +module_init(lt3593_led_init); +module_exit(lt3593_led_exit); + +MODULE_AUTHOR("Daniel Mack <daniel@caiaq.de>"); +MODULE_DESCRIPTION("LED driver for LT3593 controllers"); +MODULE_LICENSE("GPL"); diff --git a/drivers/leds/leds-pwm.c b/drivers/leds/leds-pwm.c index cdfdc8714e10..88b1dd091cfb 100644 --- a/drivers/leds/leds-pwm.c +++ b/drivers/leds/leds-pwm.c @@ -27,7 +27,6 @@ struct led_pwm_data { struct pwm_device *pwm; unsigned int active_low; unsigned int period; - unsigned int max_brightness; }; static void led_pwm_set(struct led_classdev *led_cdev, @@ -35,7 +34,7 @@ static void led_pwm_set(struct led_classdev *led_cdev, { struct led_pwm_data *led_dat = container_of(led_cdev, struct led_pwm_data, cdev); - unsigned int max = led_dat->max_brightness; + unsigned int max = led_dat->cdev.max_brightness; unsigned int period = led_dat->period; if (brightness == 0) { @@ -77,10 +76,10 @@ static int led_pwm_probe(struct platform_device *pdev) led_dat->cdev.name = cur_led->name; led_dat->cdev.default_trigger = cur_led->default_trigger; led_dat->active_low = cur_led->active_low; - led_dat->max_brightness = cur_led->max_brightness; led_dat->period = cur_led->pwm_period_ns; led_dat->cdev.brightness_set = led_pwm_set; led_dat->cdev.brightness = LED_OFF; + led_dat->cdev.max_brightness = cur_led->max_brightness; led_dat->cdev.flags |= LED_CORE_SUSPENDRESUME; ret = led_classdev_register(&pdev->dev, &led_dat->cdev); diff --git a/drivers/leds/leds-regulator.c b/drivers/leds/leds-regulator.c new file mode 100644 index 000000000000..7f00de3ef922 --- /dev/null +++ b/drivers/leds/leds-regulator.c @@ -0,0 +1,242 @@ +/* + * leds-regulator.c - LED class driver for regulator driven LEDs. + * + * Copyright (C) 2009 Antonio Ospite <ospite@studenti.unina.it> + * + * Inspired by leds-wm8350 driver. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/module.h> +#include <linux/err.h> +#include <linux/workqueue.h> +#include <linux/leds.h> +#include <linux/leds-regulator.h> +#include <linux/platform_device.h> +#include <linux/regulator/consumer.h> + +#define to_regulator_led(led_cdev) \ + container_of(led_cdev, struct regulator_led, cdev) + +struct regulator_led { + struct led_classdev cdev; + enum led_brightness value; + int enabled; + struct mutex mutex; + struct work_struct work; + + struct regulator *vcc; +}; + +static inline int led_regulator_get_max_brightness(struct regulator *supply) +{ + int ret; + int voltage = regulator_list_voltage(supply, 0); + + if (voltage <= 0) + return 1; + + /* even if regulator can't change voltages, + * we still assume it can change status + * and the LED can be turned on and off. + */ + ret = regulator_set_voltage(supply, voltage, voltage); + if (ret < 0) + return 1; + + return regulator_count_voltages(supply); +} + +static int led_regulator_get_voltage(struct regulator *supply, + enum led_brightness brightness) +{ + if (brightness == 0) + return -EINVAL; + + return regulator_list_voltage(supply, brightness - 1); +} + + +static void regulator_led_enable(struct regulator_led *led) +{ + int ret; + + if (led->enabled) + return; + + ret = regulator_enable(led->vcc); + if (ret != 0) { + dev_err(led->cdev.dev, "Failed to enable vcc: %d\n", ret); + return; + } + + led->enabled = 1; +} + +static void regulator_led_disable(struct regulator_led *led) +{ + int ret; + + if (!led->enabled) + return; + + ret = regulator_disable(led->vcc); + if (ret != 0) { + dev_err(led->cdev.dev, "Failed to disable vcc: %d\n", ret); + return; + } + + led->enabled = 0; +} + +static void regulator_led_set_value(struct regulator_led *led) +{ + int voltage; + int ret; + + mutex_lock(&led->mutex); + + if (led->value == LED_OFF) { + regulator_led_disable(led); + goto out; + } + + if (led->cdev.max_brightness > 1) { + voltage = led_regulator_get_voltage(led->vcc, led->value); + dev_dbg(led->cdev.dev, "brightness: %d voltage: %d\n", + led->value, voltage); + + ret = regulator_set_voltage(led->vcc, voltage, voltage); + if (ret != 0) + dev_err(led->cdev.dev, "Failed to set voltage %d: %d\n", + voltage, ret); + } + + regulator_led_enable(led); + +out: + mutex_unlock(&led->mutex); +} + +static void led_work(struct work_struct *work) +{ + struct regulator_led *led; + + led = container_of(work, struct regulator_led, work); + regulator_led_set_value(led); +} + +static void regulator_led_brightness_set(struct led_classdev *led_cdev, + enum led_brightness value) +{ + struct regulator_led *led = to_regulator_led(led_cdev); + + led->value = value; + schedule_work(&led->work); +} + +static int __devinit regulator_led_probe(struct platform_device *pdev) +{ + struct led_regulator_platform_data *pdata = pdev->dev.platform_data; + struct regulator_led *led; + struct regulator *vcc; + int ret = 0; + + if (pdata == NULL) { + dev_err(&pdev->dev, "no platform data\n"); + return -ENODEV; + } + + vcc = regulator_get_exclusive(&pdev->dev, "vled"); + if (IS_ERR(vcc)) { + dev_err(&pdev->dev, "Cannot get vcc for %s\n", pdata->name); + return PTR_ERR(vcc); + } + + led = kzalloc(sizeof(*led), GFP_KERNEL); + if (led == NULL) { + ret = -ENOMEM; + goto err_vcc; + } + + led->cdev.max_brightness = led_regulator_get_max_brightness(vcc); + if (pdata->brightness > led->cdev.max_brightness) { + dev_err(&pdev->dev, "Invalid default brightness %d\n", + pdata->brightness); + ret = -EINVAL; + goto err_led; + } + led->value = pdata->brightness; + + led->cdev.brightness_set = regulator_led_brightness_set; + led->cdev.name = pdata->name; + led->cdev.flags |= LED_CORE_SUSPENDRESUME; + led->vcc = vcc; + + mutex_init(&led->mutex); + INIT_WORK(&led->work, led_work); + + platform_set_drvdata(pdev, led); + + ret = led_classdev_register(&pdev->dev, &led->cdev); + if (ret < 0) { + cancel_work_sync(&led->work); + goto err_led; + } + + /* to expose the default value to userspace */ + led->cdev.brightness = led->value; + + /* Set the default led status */ + regulator_led_set_value(led); + + return 0; + +err_led: + kfree(led); +err_vcc: + regulator_put(vcc); + return ret; +} + +static int __devexit regulator_led_remove(struct platform_device *pdev) +{ + struct regulator_led *led = platform_get_drvdata(pdev); + + led_classdev_unregister(&led->cdev); + cancel_work_sync(&led->work); + regulator_led_disable(led); + regulator_put(led->vcc); + kfree(led); + return 0; +} + +static struct platform_driver regulator_led_driver = { + .driver = { + .name = "leds-regulator", + .owner = THIS_MODULE, + }, + .probe = regulator_led_probe, + .remove = __devexit_p(regulator_led_remove), +}; + +static int __init regulator_led_init(void) +{ + return platform_driver_register(®ulator_led_driver); +} +module_init(regulator_led_init); + +static void __exit regulator_led_exit(void) +{ + platform_driver_unregister(®ulator_led_driver); +} +module_exit(regulator_led_exit); + +MODULE_AUTHOR("Antonio Ospite <ospite@studenti.unina.it>"); +MODULE_DESCRIPTION("Regulator driven LED driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:leds-regulator"); diff --git a/drivers/leds/leds-ss4200.c b/drivers/leds/leds-ss4200.c new file mode 100644 index 000000000000..97f04984c1ca --- /dev/null +++ b/drivers/leds/leds-ss4200.c @@ -0,0 +1,556 @@ +/* + * SS4200-E Hardware API + * Copyright (c) 2009, Intel Corporation. + * Copyright IBM Corporation, 2009 + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * + * Author: Dave Hansen <dave@sr71.net> + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/dmi.h> +#include <linux/init.h> +#include <linux/ioport.h> +#include <linux/kernel.h> +#include <linux/leds.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/types.h> +#include <linux/uaccess.h> + +MODULE_AUTHOR("Rodney Girod <rgirod@confocus.com>, Dave Hansen <dave@sr71.net>"); +MODULE_DESCRIPTION("Intel NAS/Home Server ICH7 GPIO Driver"); +MODULE_LICENSE("GPL"); + +/* + * ICH7 LPC/GPIO PCI Config register offsets + */ +#define PMBASE 0x040 +#define GPIO_BASE 0x048 +#define GPIO_CTRL 0x04c +#define GPIO_EN 0x010 + +/* + * The ICH7 GPIO register block is 64 bytes in size. + */ +#define ICH7_GPIO_SIZE 64 + +/* + * Define register offsets within the ICH7 register block. + */ +#define GPIO_USE_SEL 0x000 +#define GP_IO_SEL 0x004 +#define GP_LVL 0x00c +#define GPO_BLINK 0x018 +#define GPI_INV 0x030 +#define GPIO_USE_SEL2 0x034 +#define GP_IO_SEL2 0x038 +#define GP_LVL2 0x03c + +/* + * PCI ID of the Intel ICH7 LPC Device within which the GPIO block lives. + */ +static struct pci_device_id ich7_lpc_pci_id[] = +{ + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_0) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_1) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_30) }, + { } /* NULL entry */ +}; + +MODULE_DEVICE_TABLE(pci, ich7_lpc_pci_id); + +static int __init ss4200_led_dmi_callback(const struct dmi_system_id *id) +{ + pr_info("detected '%s'\n", id->ident); + return 1; +} + +static unsigned int __initdata nodetect; +module_param_named(nodetect, nodetect, bool, 0); +MODULE_PARM_DESC(nodetect, "Skip DMI-based hardware detection"); + +/* + * struct nas_led_whitelist - List of known good models + * + * Contains the known good models this driver is compatible with. + * When adding a new model try to be as strict as possible. This + * makes it possible to keep the false positives (the model is + * detected as working, but in reality it is not) as low as + * possible. + */ +static struct dmi_system_id __initdata nas_led_whitelist[] = { + { + .callback = ss4200_led_dmi_callback, + .ident = "Intel SS4200-E", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Intel"), + DMI_MATCH(DMI_PRODUCT_NAME, "SS4200-E"), + DMI_MATCH(DMI_PRODUCT_VERSION, "1.00.00") + } + }, +}; + +/* + * Base I/O address assigned to the Power Management register block + */ +static u32 g_pm_io_base; + +/* + * Base I/O address assigned to the ICH7 GPIO register block + */ +static u32 nas_gpio_io_base; + +/* + * When we successfully register a region, we are returned a resource. + * We use these to identify which regions we need to release on our way + * back out. + */ +static struct resource *gp_gpio_resource; + +struct nasgpio_led { + char *name; + u32 gpio_bit; + struct led_classdev led_cdev; +}; + +/* + * gpio_bit(s) are the ICH7 GPIO bit assignments + */ +static struct nasgpio_led nasgpio_leds[] = { + { .name = "hdd1:blue:sata", .gpio_bit = 0 }, + { .name = "hdd1:amber:sata", .gpio_bit = 1 }, + { .name = "hdd2:blue:sata", .gpio_bit = 2 }, + { .name = "hdd2:amber:sata", .gpio_bit = 3 }, + { .name = "hdd3:blue:sata", .gpio_bit = 4 }, + { .name = "hdd3:amber:sata", .gpio_bit = 5 }, + { .name = "hdd4:blue:sata", .gpio_bit = 6 }, + { .name = "hdd4:amber:sata", .gpio_bit = 7 }, + { .name = "power:blue:power", .gpio_bit = 27}, + { .name = "power:amber:power", .gpio_bit = 28}, +}; + +#define NAS_RECOVERY 0x00000400 /* GPIO10 */ + +static struct nasgpio_led * +led_classdev_to_nasgpio_led(struct led_classdev *led_cdev) +{ + return container_of(led_cdev, struct nasgpio_led, led_cdev); +} + +static struct nasgpio_led *get_led_named(char *name) +{ + int i; + for (i = 0; i < ARRAY_SIZE(nasgpio_leds); i++) { + if (strcmp(nasgpio_leds[i].name, name)) + continue; + return &nasgpio_leds[i]; + } + return NULL; +} + +/* + * This protects access to the gpio ports. + */ +static DEFINE_SPINLOCK(nasgpio_gpio_lock); + +/* + * There are two gpio ports, one for blinking and the other + * for power. @port tells us if we're doing blinking or + * power control. + * + * Caller must hold nasgpio_gpio_lock + */ +static void __nasgpio_led_set_attr(struct led_classdev *led_cdev, + u32 port, u32 value) +{ + struct nasgpio_led *led = led_classdev_to_nasgpio_led(led_cdev); + u32 gpio_out; + + gpio_out = inl(nas_gpio_io_base + port); + if (value) + gpio_out |= (1<<led->gpio_bit); + else + gpio_out &= ~(1<<led->gpio_bit); + + outl(gpio_out, nas_gpio_io_base + port); +} + +static void nasgpio_led_set_attr(struct led_classdev *led_cdev, + u32 port, u32 value) +{ + spin_lock(&nasgpio_gpio_lock); + __nasgpio_led_set_attr(led_cdev, port, value); + spin_unlock(&nasgpio_gpio_lock); +} + +u32 nasgpio_led_get_attr(struct led_classdev *led_cdev, u32 port) +{ + struct nasgpio_led *led = led_classdev_to_nasgpio_led(led_cdev); + u32 gpio_in; + + spin_lock(&nasgpio_gpio_lock); + gpio_in = inl(nas_gpio_io_base + port); + spin_unlock(&nasgpio_gpio_lock); + if (gpio_in & (1<<led->gpio_bit)) + return 1; + return 0; +} + +/* + * There is actual brightness control in the hardware, + * but it is via smbus commands and not implemented + * in this driver. + */ +static void nasgpio_led_set_brightness(struct led_classdev *led_cdev, + enum led_brightness brightness) +{ + u32 setting = 0; + if (brightness >= LED_HALF) + setting = 1; + /* + * Hold the lock across both operations. This ensures + * consistency so that both the "turn off blinking" + * and "turn light off" operations complete as a set. + */ + spin_lock(&nasgpio_gpio_lock); + /* + * LED class documentation asks that past blink state + * be disabled when brightness is turned to zero. + */ + if (brightness == 0) + __nasgpio_led_set_attr(led_cdev, GPO_BLINK, 0); + __nasgpio_led_set_attr(led_cdev, GP_LVL, setting); + spin_unlock(&nasgpio_gpio_lock); +} + +static int nasgpio_led_set_blink(struct led_classdev *led_cdev, + unsigned long *delay_on, + unsigned long *delay_off) +{ + u32 setting = 1; + if (!(*delay_on == 0 && *delay_off == 0) && + !(*delay_on == 500 && *delay_off == 500)) + return -EINVAL; + /* + * These are very approximate. + */ + *delay_on = 500; + *delay_off = 500; + + nasgpio_led_set_attr(led_cdev, GPO_BLINK, setting); + + return 0; +} + + +/* + * Initialize the ICH7 GPIO registers for NAS usage. The BIOS should have + * already taken care of this, but we will do so in a non destructive manner + * so that we have what we need whether the BIOS did it or not. + */ +static int __devinit ich7_gpio_init(struct device *dev) +{ + int i; + u32 config_data = 0; + u32 all_nas_led = 0; + + for (i = 0; i < ARRAY_SIZE(nasgpio_leds); i++) + all_nas_led |= (1<<nasgpio_leds[i].gpio_bit); + + spin_lock(&nasgpio_gpio_lock); + /* + * We need to enable all of the GPIO lines used by the NAS box, + * so we will read the current Use Selection and add our usage + * to it. This should be benign with regard to the original + * BIOS configuration. + */ + config_data = inl(nas_gpio_io_base + GPIO_USE_SEL); + dev_dbg(dev, ": Data read from GPIO_USE_SEL = 0x%08x\n", config_data); + config_data |= all_nas_led + NAS_RECOVERY; + outl(config_data, nas_gpio_io_base + GPIO_USE_SEL); + config_data = inl(nas_gpio_io_base + GPIO_USE_SEL); + dev_dbg(dev, ": GPIO_USE_SEL = 0x%08x\n\n", config_data); + + /* + * The LED GPIO outputs need to be configured for output, so we + * will ensure that all LED lines are cleared for output and the + * RECOVERY line ready for input. This too should be benign with + * regard to BIOS configuration. + */ + config_data = inl(nas_gpio_io_base + GP_IO_SEL); + dev_dbg(dev, ": Data read from GP_IO_SEL = 0x%08x\n", + config_data); + config_data &= ~all_nas_led; + config_data |= NAS_RECOVERY; + outl(config_data, nas_gpio_io_base + GP_IO_SEL); + config_data = inl(nas_gpio_io_base + GP_IO_SEL); + dev_dbg(dev, ": GP_IO_SEL = 0x%08x\n", config_data); + + /* + * In our final system, the BIOS will initialize the state of all + * of the LEDs. For now, we turn them all off (or Low). + */ + config_data = inl(nas_gpio_io_base + GP_LVL); + dev_dbg(dev, ": Data read from GP_LVL = 0x%08x\n", config_data); + /* + * In our final system, the BIOS will initialize the blink state of all + * of the LEDs. For now, we turn blink off for all of them. + */ + config_data = inl(nas_gpio_io_base + GPO_BLINK); + dev_dbg(dev, ": Data read from GPO_BLINK = 0x%08x\n", config_data); + + /* + * At this moment, I am unsure if anything needs to happen with GPI_INV + */ + config_data = inl(nas_gpio_io_base + GPI_INV); + dev_dbg(dev, ": Data read from GPI_INV = 0x%08x\n", config_data); + + spin_unlock(&nasgpio_gpio_lock); + return 0; +} + +static void ich7_lpc_cleanup(struct device *dev) +{ + /* + * If we were given exclusive use of the GPIO + * I/O Address range, we must return it. + */ + if (gp_gpio_resource) { + dev_dbg(dev, ": Releasing GPIO I/O addresses\n"); + release_region(nas_gpio_io_base, ICH7_GPIO_SIZE); + gp_gpio_resource = NULL; + } +} + +/* + * The OS has determined that the LPC of the Intel ICH7 Southbridge is present + * so we can retrive the required operational information and prepare the GPIO. + */ +static struct pci_dev *nas_gpio_pci_dev; +static int __devinit ich7_lpc_probe(struct pci_dev *dev, + const struct pci_device_id *id) +{ + int status; + u32 gc = 0; + + status = pci_enable_device(dev); + if (status) { + dev_err(&dev->dev, "pci_enable_device failed\n"); + return -EIO; + } + + nas_gpio_pci_dev = dev; + status = pci_read_config_dword(dev, PMBASE, &g_pm_io_base); + if (status) + goto out; + g_pm_io_base &= 0x00000ff80; + + status = pci_read_config_dword(dev, GPIO_CTRL, &gc); + if (!(GPIO_EN & gc)) { + status = -EEXIST; + dev_info(&dev->dev, + "ERROR: The LPC GPIO Block has not been enabled.\n"); + goto out; + } + + status = pci_read_config_dword(dev, GPIO_BASE, &nas_gpio_io_base); + if (0 > status) { + dev_info(&dev->dev, "Unable to read GPIOBASE.\n"); + goto out; + } + dev_dbg(&dev->dev, ": GPIOBASE = 0x%08x\n", nas_gpio_io_base); + nas_gpio_io_base &= 0x00000ffc0; + + /* + * Insure that we have exclusive access to the GPIO I/O address range. + */ + gp_gpio_resource = request_region(nas_gpio_io_base, ICH7_GPIO_SIZE, + KBUILD_MODNAME); + if (NULL == gp_gpio_resource) { + dev_info(&dev->dev, + "ERROR Unable to register GPIO I/O addresses.\n"); + status = -1; + goto out; + } + + /* + * Initialize the GPIO for NAS/Home Server Use + */ + ich7_gpio_init(&dev->dev); + +out: + if (status) { + ich7_lpc_cleanup(&dev->dev); + pci_disable_device(dev); + } + return status; +} + +static void ich7_lpc_remove(struct pci_dev *dev) +{ + ich7_lpc_cleanup(&dev->dev); + pci_disable_device(dev); +} + +/* + * pci_driver structure passed to the PCI modules + */ +static struct pci_driver nas_gpio_pci_driver = { + .name = KBUILD_MODNAME, + .id_table = ich7_lpc_pci_id, + .probe = ich7_lpc_probe, + .remove = ich7_lpc_remove, +}; + +static struct led_classdev *get_classdev_for_led_nr(int nr) +{ + struct nasgpio_led *nas_led = &nasgpio_leds[nr]; + struct led_classdev *led = &nas_led->led_cdev; + return led; +} + + +static void set_power_light_amber_noblink(void) +{ + struct nasgpio_led *amber = get_led_named("power:amber:power"); + struct nasgpio_led *blue = get_led_named("power:blue:power"); + + if (!amber || !blue) + return; + /* + * LED_OFF implies disabling future blinking + */ + pr_debug("setting blue off and amber on\n"); + + nasgpio_led_set_brightness(&blue->led_cdev, LED_OFF); + nasgpio_led_set_brightness(&amber->led_cdev, LED_FULL); +} + +static ssize_t nas_led_blink_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct led_classdev *led = dev_get_drvdata(dev); + int blinking = 0; + if (nasgpio_led_get_attr(led, GPO_BLINK)) + blinking = 1; + return sprintf(buf, "%u\n", blinking); +} + +static ssize_t nas_led_blink_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t size) +{ + int ret; + struct led_classdev *led = dev_get_drvdata(dev); + unsigned long blink_state; + + ret = strict_strtoul(buf, 10, &blink_state); + if (ret) + return ret; + + nasgpio_led_set_attr(led, GPO_BLINK, blink_state); + + return size; +} + +static DEVICE_ATTR(blink, 0644, nas_led_blink_show, nas_led_blink_store); + +static int register_nasgpio_led(int led_nr) +{ + int ret; + struct nasgpio_led *nas_led = &nasgpio_leds[led_nr]; + struct led_classdev *led = get_classdev_for_led_nr(led_nr); + + led->name = nas_led->name; + led->brightness = LED_OFF; + if (nasgpio_led_get_attr(led, GP_LVL)) + led->brightness = LED_FULL; + led->brightness_set = nasgpio_led_set_brightness; + led->blink_set = nasgpio_led_set_blink; + ret = led_classdev_register(&nas_gpio_pci_dev->dev, led); + if (ret) + return ret; + ret = device_create_file(led->dev, &dev_attr_blink); + if (ret) + led_classdev_unregister(led); + return ret; +} + +static void unregister_nasgpio_led(int led_nr) +{ + struct led_classdev *led = get_classdev_for_led_nr(led_nr); + led_classdev_unregister(led); + device_remove_file(led->dev, &dev_attr_blink); +} +/* + * module load/initialization + */ +static int __init nas_gpio_init(void) +{ + int i; + int ret = 0; + int nr_devices = 0; + + nr_devices = dmi_check_system(nas_led_whitelist); + if (nodetect) { + pr_info("skipping hardware autodetection\n"); + pr_info("Please send 'dmidecode' output to dave@sr71.net\n"); + nr_devices++; + } + + if (nr_devices <= 0) { + pr_info("no LED devices found\n"); + return -ENODEV; + } + + pr_info("registering PCI driver\n"); + ret = pci_register_driver(&nas_gpio_pci_driver); + if (ret) + return ret; + for (i = 0; i < ARRAY_SIZE(nasgpio_leds); i++) { + ret = register_nasgpio_led(i); + if (ret) + goto out_err; + } + /* + * When the system powers on, the BIOS leaves the power + * light blue and blinking. This will turn it solid + * amber once the driver is loaded. + */ + set_power_light_amber_noblink(); + return 0; +out_err: + for (; i >= 0; i--) + unregister_nasgpio_led(i); + pci_unregister_driver(&nas_gpio_pci_driver); + return ret; +} + +/* + * module unload + */ +static void __exit nas_gpio_exit(void) +{ + int i; + pr_info("Unregistering driver\n"); + for (i = 0; i < ARRAY_SIZE(nasgpio_leds); i++) + unregister_nasgpio_led(i); + pci_unregister_driver(&nas_gpio_pci_driver); +} + +module_init(nas_gpio_init); +module_exit(nas_gpio_exit); diff --git a/drivers/media/video/cx23885/cx23888-ir.c b/drivers/media/video/cx23885/cx23888-ir.c index 3ccc8afeccf3..2bf57a4527d3 100644 --- a/drivers/media/video/cx23885/cx23888-ir.c +++ b/drivers/media/video/cx23885/cx23888-ir.c @@ -124,15 +124,12 @@ struct cx23888_ir_state { atomic_t rxclk_divider; atomic_t rx_invert; - struct kfifo *rx_kfifo; + struct kfifo rx_kfifo; spinlock_t rx_kfifo_lock; struct v4l2_subdev_ir_parameters tx_params; struct mutex tx_params_lock; atomic_t txclk_divider; - - struct kfifo *tx_kfifo; - spinlock_t tx_kfifo_lock; }; static inline struct cx23888_ir_state *to_state(struct v4l2_subdev *sd) @@ -522,6 +519,7 @@ static int cx23888_ir_irq_handler(struct v4l2_subdev *sd, u32 status, { struct cx23888_ir_state *state = to_state(sd); struct cx23885_dev *dev = state->dev; + unsigned long flags; u32 cntrl = cx23888_ir_read4(dev, CX23888_IR_CNTRL_REG); u32 irqen = cx23888_ir_read4(dev, CX23888_IR_IRQEN_REG); @@ -594,8 +592,9 @@ static int cx23888_ir_irq_handler(struct v4l2_subdev *sd, u32 status, if (i == 0) break; j = i * sizeof(u32); - k = kfifo_put(state->rx_kfifo, - (unsigned char *) rx_data, j); + k = kfifo_in_locked(&state->rx_kfifo, + (unsigned char *) rx_data, j, + &state->rx_kfifo_lock); if (k != j) kror++; /* rx_kfifo over run */ } @@ -631,8 +630,11 @@ static int cx23888_ir_irq_handler(struct v4l2_subdev *sd, u32 status, cx23888_ir_write4(dev, CX23888_IR_CNTRL_REG, cntrl); *handled = true; } - if (kfifo_len(state->rx_kfifo) >= CX23888_IR_RX_KFIFO_SIZE / 2) + + spin_lock_irqsave(&state->rx_kfifo_lock, flags); + if (kfifo_len(&state->rx_kfifo) >= CX23888_IR_RX_KFIFO_SIZE / 2) events |= V4L2_SUBDEV_IR_RX_FIFO_SERVICE_REQ; + spin_unlock_irqrestore(&state->rx_kfifo_lock, flags); if (events) v4l2_subdev_notify(sd, V4L2_SUBDEV_IR_RX_NOTIFY, &events); @@ -657,7 +659,7 @@ static int cx23888_ir_rx_read(struct v4l2_subdev *sd, u8 *buf, size_t count, return 0; } - n = kfifo_get(state->rx_kfifo, buf, n); + n = kfifo_out_locked(&state->rx_kfifo, buf, n, &state->rx_kfifo_lock); n /= sizeof(u32); *num = n * sizeof(u32); @@ -785,7 +787,12 @@ static int cx23888_ir_rx_s_parameters(struct v4l2_subdev *sd, o->interrupt_enable = p->interrupt_enable; o->enable = p->enable; if (p->enable) { - kfifo_reset(state->rx_kfifo); + unsigned long flags; + + spin_lock_irqsave(&state->rx_kfifo_lock, flags); + kfifo_reset(&state->rx_kfifo); + /* reset tx_fifo too if there is one... */ + spin_unlock_irqrestore(&state->rx_kfifo_lock, flags); if (p->interrupt_enable) irqenable_rx(dev, IRQEN_RSE | IRQEN_RTE | IRQEN_ROE); control_rx_enable(dev, p->enable); @@ -892,7 +899,6 @@ static int cx23888_ir_tx_s_parameters(struct v4l2_subdev *sd, o->interrupt_enable = p->interrupt_enable; o->enable = p->enable; if (p->enable) { - kfifo_reset(state->tx_kfifo); if (p->interrupt_enable) irqenable_tx(dev, IRQEN_TSE); control_tx_enable(dev, p->enable); @@ -1168,18 +1174,8 @@ int cx23888_ir_probe(struct cx23885_dev *dev) return -ENOMEM; spin_lock_init(&state->rx_kfifo_lock); - state->rx_kfifo = kfifo_alloc(CX23888_IR_RX_KFIFO_SIZE, GFP_KERNEL, - &state->rx_kfifo_lock); - if (state->rx_kfifo == NULL) - return -ENOMEM; - - spin_lock_init(&state->tx_kfifo_lock); - state->tx_kfifo = kfifo_alloc(CX23888_IR_TX_KFIFO_SIZE, GFP_KERNEL, - &state->tx_kfifo_lock); - if (state->tx_kfifo == NULL) { - kfifo_free(state->rx_kfifo); + if (kfifo_alloc(&state->rx_kfifo, CX23888_IR_RX_KFIFO_SIZE, GFP_KERNEL)) return -ENOMEM; - } state->dev = dev; state->id = V4L2_IDENT_CX23888_IR; @@ -1211,8 +1207,7 @@ int cx23888_ir_probe(struct cx23885_dev *dev) sizeof(struct v4l2_subdev_ir_parameters)); v4l2_subdev_call(sd, ir, tx_s_parameters, &default_params); } else { - kfifo_free(state->rx_kfifo); - kfifo_free(state->tx_kfifo); + kfifo_free(&state->rx_kfifo); } return ret; } @@ -1231,8 +1226,7 @@ int cx23888_ir_remove(struct cx23885_dev *dev) state = to_state(sd); v4l2_device_unregister_subdev(sd); - kfifo_free(state->rx_kfifo); - kfifo_free(state->tx_kfifo); + kfifo_free(&state->rx_kfifo); kfree(state); /* Nothing more to free() as state held the actual v4l2_subdev object */ return 0; diff --git a/drivers/media/video/meye.c b/drivers/media/video/meye.c index 6ffa64cd1c6d..b421858ccf90 100644 --- a/drivers/media/video/meye.c +++ b/drivers/media/video/meye.c @@ -800,8 +800,8 @@ again: return IRQ_HANDLED; if (meye.mchip_mode == MCHIP_HIC_MODE_CONT_OUT) { - if (kfifo_get(meye.grabq, (unsigned char *)&reqnr, - sizeof(int)) != sizeof(int)) { + if (kfifo_out_locked(&meye.grabq, (unsigned char *)&reqnr, + sizeof(int), &meye.grabq_lock) != sizeof(int)) { mchip_free_frame(); return IRQ_HANDLED; } @@ -811,7 +811,8 @@ again: meye.grab_buffer[reqnr].state = MEYE_BUF_DONE; do_gettimeofday(&meye.grab_buffer[reqnr].timestamp); meye.grab_buffer[reqnr].sequence = sequence++; - kfifo_put(meye.doneq, (unsigned char *)&reqnr, sizeof(int)); + kfifo_in_locked(&meye.doneq, (unsigned char *)&reqnr, + sizeof(int), &meye.doneq_lock); wake_up_interruptible(&meye.proc_list); } else { int size; @@ -820,8 +821,8 @@ again: mchip_free_frame(); goto again; } - if (kfifo_get(meye.grabq, (unsigned char *)&reqnr, - sizeof(int)) != sizeof(int)) { + if (kfifo_out_locked(&meye.grabq, (unsigned char *)&reqnr, + sizeof(int), &meye.grabq_lock) != sizeof(int)) { mchip_free_frame(); goto again; } @@ -831,7 +832,8 @@ again: meye.grab_buffer[reqnr].state = MEYE_BUF_DONE; do_gettimeofday(&meye.grab_buffer[reqnr].timestamp); meye.grab_buffer[reqnr].sequence = sequence++; - kfifo_put(meye.doneq, (unsigned char *)&reqnr, sizeof(int)); + kfifo_in_locked(&meye.doneq, (unsigned char *)&reqnr, + sizeof(int), &meye.doneq_lock); wake_up_interruptible(&meye.proc_list); } mchip_free_frame(); @@ -859,8 +861,8 @@ static int meye_open(struct file *file) for (i = 0; i < MEYE_MAX_BUFNBRS; i++) meye.grab_buffer[i].state = MEYE_BUF_UNUSED; - kfifo_reset(meye.grabq); - kfifo_reset(meye.doneq); + kfifo_reset(&meye.grabq); + kfifo_reset(&meye.doneq); return 0; } @@ -933,7 +935,8 @@ static int meyeioc_qbuf_capt(int *nb) mchip_cont_compression_start(); meye.grab_buffer[*nb].state = MEYE_BUF_USING; - kfifo_put(meye.grabq, (unsigned char *)nb, sizeof(int)); + kfifo_in_locked(&meye.grabq, (unsigned char *)nb, sizeof(int), + &meye.grabq_lock); mutex_unlock(&meye.lock); return 0; @@ -965,7 +968,9 @@ static int meyeioc_sync(struct file *file, void *fh, int *i) /* fall through */ case MEYE_BUF_DONE: meye.grab_buffer[*i].state = MEYE_BUF_UNUSED; - kfifo_get(meye.doneq, (unsigned char *)&unused, sizeof(int)); + if (kfifo_out_locked(&meye.doneq, (unsigned char *)&unused, + sizeof(int), &meye.doneq_lock) != sizeof(int)) + break; } *i = meye.grab_buffer[*i].size; mutex_unlock(&meye.lock); @@ -1452,7 +1457,8 @@ static int vidioc_qbuf(struct file *file, void *fh, struct v4l2_buffer *buf) buf->flags |= V4L2_BUF_FLAG_QUEUED; buf->flags &= ~V4L2_BUF_FLAG_DONE; meye.grab_buffer[buf->index].state = MEYE_BUF_USING; - kfifo_put(meye.grabq, (unsigned char *)&buf->index, sizeof(int)); + kfifo_in_locked(&meye.grabq, (unsigned char *)&buf->index, + sizeof(int), &meye.grabq_lock); mutex_unlock(&meye.lock); return 0; @@ -1467,19 +1473,19 @@ static int vidioc_dqbuf(struct file *file, void *fh, struct v4l2_buffer *buf) mutex_lock(&meye.lock); - if (kfifo_len(meye.doneq) == 0 && file->f_flags & O_NONBLOCK) { + if (kfifo_len(&meye.doneq) == 0 && file->f_flags & O_NONBLOCK) { mutex_unlock(&meye.lock); return -EAGAIN; } if (wait_event_interruptible(meye.proc_list, - kfifo_len(meye.doneq) != 0) < 0) { + kfifo_len(&meye.doneq) != 0) < 0) { mutex_unlock(&meye.lock); return -EINTR; } - if (!kfifo_get(meye.doneq, (unsigned char *)&reqnr, - sizeof(int))) { + if (!kfifo_out_locked(&meye.doneq, (unsigned char *)&reqnr, + sizeof(int), &meye.doneq_lock)) { mutex_unlock(&meye.lock); return -EBUSY; } @@ -1529,8 +1535,8 @@ static int vidioc_streamoff(struct file *file, void *fh, enum v4l2_buf_type i) { mutex_lock(&meye.lock); mchip_hic_stop(); - kfifo_reset(meye.grabq); - kfifo_reset(meye.doneq); + kfifo_reset(&meye.grabq); + kfifo_reset(&meye.doneq); for (i = 0; i < MEYE_MAX_BUFNBRS; i++) meye.grab_buffer[i].state = MEYE_BUF_UNUSED; @@ -1572,7 +1578,7 @@ static unsigned int meye_poll(struct file *file, poll_table *wait) mutex_lock(&meye.lock); poll_wait(file, &meye.proc_list, wait); - if (kfifo_len(meye.doneq)) + if (kfifo_len(&meye.doneq)) res = POLLIN | POLLRDNORM; mutex_unlock(&meye.lock); return res; @@ -1745,16 +1751,14 @@ static int __devinit meye_probe(struct pci_dev *pcidev, } spin_lock_init(&meye.grabq_lock); - meye.grabq = kfifo_alloc(sizeof(int) * MEYE_MAX_BUFNBRS, GFP_KERNEL, - &meye.grabq_lock); - if (IS_ERR(meye.grabq)) { + if (kfifo_alloc(&meye.grabq, sizeof(int) * MEYE_MAX_BUFNBRS, + GFP_KERNEL)) { printk(KERN_ERR "meye: fifo allocation failed\n"); goto outkfifoalloc1; } spin_lock_init(&meye.doneq_lock); - meye.doneq = kfifo_alloc(sizeof(int) * MEYE_MAX_BUFNBRS, GFP_KERNEL, - &meye.doneq_lock); - if (IS_ERR(meye.doneq)) { + if (kfifo_alloc(&meye.doneq, sizeof(int) * MEYE_MAX_BUFNBRS, + GFP_KERNEL)) { printk(KERN_ERR "meye: fifo allocation failed\n"); goto outkfifoalloc2; } @@ -1868,9 +1872,9 @@ outregions: outenabledev: sony_pic_camera_command(SONY_PIC_COMMAND_SETCAMERA, 0); outsonypienable: - kfifo_free(meye.doneq); + kfifo_free(&meye.doneq); outkfifoalloc2: - kfifo_free(meye.grabq); + kfifo_free(&meye.grabq); outkfifoalloc1: vfree(meye.grab_temp); outvmalloc: @@ -1901,8 +1905,8 @@ static void __devexit meye_remove(struct pci_dev *pcidev) sony_pic_camera_command(SONY_PIC_COMMAND_SETCAMERA, 0); - kfifo_free(meye.doneq); - kfifo_free(meye.grabq); + kfifo_free(&meye.doneq); + kfifo_free(&meye.grabq); vfree(meye.grab_temp); diff --git a/drivers/media/video/meye.h b/drivers/media/video/meye.h index 5f70a106ba2b..1321ad5d6597 100644 --- a/drivers/media/video/meye.h +++ b/drivers/media/video/meye.h @@ -303,9 +303,9 @@ struct meye { struct meye_grab_buffer grab_buffer[MEYE_MAX_BUFNBRS]; int vma_use_count[MEYE_MAX_BUFNBRS]; /* mmap count */ struct mutex lock; /* mutex for open/mmap... */ - struct kfifo *grabq; /* queue for buffers to be grabbed */ + struct kfifo grabq; /* queue for buffers to be grabbed */ spinlock_t grabq_lock; /* lock protecting the queue */ - struct kfifo *doneq; /* queue for grabbed buffers */ + struct kfifo doneq; /* queue for grabbed buffers */ spinlock_t doneq_lock; /* lock protecting the queue */ wait_queue_head_t proc_list; /* wait queue */ struct video_device *video_dev; /* video device parameters */ diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c index 610e914abe6c..85bc6a685e36 100644 --- a/drivers/message/fusion/mptbase.c +++ b/drivers/message/fusion/mptbase.c @@ -1587,7 +1587,7 @@ mpt_mapresources(MPT_ADAPTER *ioc) { u8 __iomem *mem; int ii; - unsigned long mem_phys; + resource_size_t mem_phys; unsigned long port; u32 msize; u32 psize; @@ -1677,8 +1677,8 @@ mpt_mapresources(MPT_ADAPTER *ioc) return -EINVAL; } ioc->memmap = mem; - dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "mem = %p, mem_phys = %lx\n", - ioc->name, mem, mem_phys)); + dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "mem = %p, mem_phys = %llx\n", + ioc->name, mem, (unsigned long long)mem_phys)); ioc->mem_phys = mem_phys; ioc->chip = (SYSIF_REGS __iomem *)mem; diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 1a7a9fc50ea1..e3551d20464f 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -203,6 +203,7 @@ config CS5535_MFGPT config CS5535_MFGPT_DEFAULT_IRQ int + depends on CS5535_MFGPT default 7 help MFGPTs on the CS5535 require an interrupt. The selected IRQ diff --git a/drivers/misc/enclosure.c b/drivers/misc/enclosure.c index e9eae4a78402..1eac626e710a 100644 --- a/drivers/misc/enclosure.c +++ b/drivers/misc/enclosure.c @@ -391,6 +391,7 @@ static const char *const enclosure_status [] = { [ENCLOSURE_STATUS_NOT_INSTALLED] = "not installed", [ENCLOSURE_STATUS_UNKNOWN] = "unknown", [ENCLOSURE_STATUS_UNAVAILABLE] = "unavailable", + [ENCLOSURE_STATUS_MAX] = NULL, }; static const char *const enclosure_type [] = { diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c index cdb845b68ab5..06b64085a355 100644 --- a/drivers/mmc/core/sdio.c +++ b/drivers/mmc/core/sdio.c @@ -516,7 +516,8 @@ int mmc_attach_sdio(struct mmc_host *host, u32 ocr) * The number of functions on the card is encoded inside * the ocr. */ - card->sdio_funcs = funcs = (ocr & 0x70000000) >> 28; + funcs = (ocr & 0x70000000) >> 28; + card->sdio_funcs = 0; /* * If needed, disconnect card detection pull-up resistor. @@ -528,7 +529,7 @@ int mmc_attach_sdio(struct mmc_host *host, u32 ocr) /* * Initialize (but don't add) all present functions. */ - for (i = 0;i < funcs;i++) { + for (i = 0; i < funcs; i++, card->sdio_funcs++) { err = sdio_init_func(host->card, i + 1); if (err) goto remove; diff --git a/drivers/mmc/core/sdio_bus.c b/drivers/mmc/core/sdio_bus.c index d37464e296a5..9e060c87e64d 100644 --- a/drivers/mmc/core/sdio_bus.c +++ b/drivers/mmc/core/sdio_bus.c @@ -248,12 +248,15 @@ int sdio_add_func(struct sdio_func *func) /* * Unregister a SDIO function with the driver model, and * (eventually) free it. + * This function can be called through error paths where sdio_add_func() was + * never executed (because a failure occurred at an earlier point). */ void sdio_remove_func(struct sdio_func *func) { - if (sdio_func_present(func)) - device_del(&func->dev); + if (!sdio_func_present(func)) + return; + device_del(&func->dev); put_device(&func->dev); } diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index 9d405b181781..ce1d28884e29 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -44,6 +44,19 @@ config MMC_SDHCI_IO_ACCESSORS This is silent Kconfig symbol that is selected by the drivers that need to overwrite SDHCI IO memory accessors. +config MMC_SDHCI_BIG_ENDIAN_32BIT_BYTE_SWAPPER + bool + select MMC_SDHCI_IO_ACCESSORS + help + This option is selected by drivers running on big endian hosts + and performing I/O to a SDHCI controller through a bus that + implements a hardware byte swapper using a 32-bit datum. + This endian mapping mode is called "data invariance" and + has the effect of scrambling the addresses and formats of data + accessed in sizes other than the datum size. + + This is the case for the Freescale eSDHC and Nintendo Wii SDHCI. + config MMC_SDHCI_PCI tristate "SDHCI support on PCI bus" depends on MMC_SDHCI && PCI @@ -75,11 +88,29 @@ config MMC_RICOH_MMC config MMC_SDHCI_OF tristate "SDHCI support on OpenFirmware platforms" depends on MMC_SDHCI && PPC_OF - select MMC_SDHCI_IO_ACCESSORS help This selects the OF support for Secure Digital Host Controller - Interfaces. So far, only the Freescale eSDHC controller is known - to exist on OF platforms. + Interfaces. + + If unsure, say N. + +config MMC_SDHCI_OF_ESDHC + bool "SDHCI OF support for the Freescale eSDHC controller" + depends on MMC_SDHCI_OF + select MMC_SDHCI_BIG_ENDIAN_32BIT_BYTE_SWAPPER + help + This selects the Freescale eSDHC controller support. + + If unsure, say N. + +config MMC_SDHCI_OF_HLWD + bool "SDHCI OF support for the Nintendo Wii SDHCI controllers" + depends on MMC_SDHCI_OF + select MMC_SDHCI_BIG_ENDIAN_32BIT_BYTE_SWAPPER + help + This selects the Secure Digital Host Controller Interface (SDHCI) + found in the "Hollywood" chipset of the Nintendo Wii video game + console. If unsure, say N. diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile index ded4d8cdd9d7..3d253dd4240f 100644 --- a/drivers/mmc/host/Makefile +++ b/drivers/mmc/host/Makefile @@ -13,7 +13,6 @@ obj-$(CONFIG_MMC_MXC) += mxcmmc.o obj-$(CONFIG_MMC_SDHCI) += sdhci.o obj-$(CONFIG_MMC_SDHCI_PCI) += sdhci-pci.o obj-$(CONFIG_MMC_RICOH_MMC) += ricoh_mmc.o -obj-$(CONFIG_MMC_SDHCI_OF) += sdhci-of.o obj-$(CONFIG_MMC_SDHCI_PLTFM) += sdhci-pltfm.o obj-$(CONFIG_MMC_SDHCI_S3C) += sdhci-s3c.o obj-$(CONFIG_MMC_WBSD) += wbsd.o @@ -37,6 +36,11 @@ obj-$(CONFIG_MMC_CB710) += cb710-mmc.o obj-$(CONFIG_MMC_VIA_SDMMC) += via-sdmmc.o obj-$(CONFIG_SDH_BFIN) += bfin_sdh.o +obj-$(CONFIG_MMC_SDHCI_OF) += sdhci-of.o +sdhci-of-y := sdhci-of-core.o +sdhci-of-$(CONFIG_MMC_SDHCI_OF_ESDHC) += sdhci-of-esdhc.o +sdhci-of-$(CONFIG_MMC_SDHCI_OF_HLWD) += sdhci-of-hlwd.o + ifeq ($(CONFIG_CB710_DEBUG),y) CFLAGS-cb710-mmc += -DDEBUG endif diff --git a/drivers/mmc/host/sdhci-of.c b/drivers/mmc/host/sdhci-of-core.c index 01ab916c2802..55e33135edb4 100644 --- a/drivers/mmc/host/sdhci-of.c +++ b/drivers/mmc/host/sdhci-of-core.c @@ -22,62 +22,37 @@ #include <linux/of_platform.h> #include <linux/mmc/host.h> #include <asm/machdep.h> +#include "sdhci-of.h" #include "sdhci.h" -struct sdhci_of_data { - unsigned int quirks; - struct sdhci_ops ops; -}; - -struct sdhci_of_host { - unsigned int clock; - u16 xfer_mode_shadow; -}; +#ifdef CONFIG_MMC_SDHCI_BIG_ENDIAN_32BIT_BYTE_SWAPPER /* - * Ops and quirks for the Freescale eSDHC controller. + * These accessors are designed for big endian hosts doing I/O to + * little endian controllers incorporating a 32-bit hardware byte swapper. */ -#define ESDHC_DMA_SYSCTL 0x40c -#define ESDHC_DMA_SNOOP 0x00000040 - -#define ESDHC_SYSTEM_CONTROL 0x2c -#define ESDHC_CLOCK_MASK 0x0000fff0 -#define ESDHC_PREDIV_SHIFT 8 -#define ESDHC_DIVIDER_SHIFT 4 -#define ESDHC_CLOCK_PEREN 0x00000004 -#define ESDHC_CLOCK_HCKEN 0x00000002 -#define ESDHC_CLOCK_IPGEN 0x00000001 - -#define ESDHC_HOST_CONTROL_RES 0x05 - -static u32 esdhc_readl(struct sdhci_host *host, int reg) +u32 sdhci_be32bs_readl(struct sdhci_host *host, int reg) { return in_be32(host->ioaddr + reg); } -static u16 esdhc_readw(struct sdhci_host *host, int reg) +u16 sdhci_be32bs_readw(struct sdhci_host *host, int reg) { - u16 ret; - - if (unlikely(reg == SDHCI_HOST_VERSION)) - ret = in_be16(host->ioaddr + reg); - else - ret = in_be16(host->ioaddr + (reg ^ 0x2)); - return ret; + return in_be16(host->ioaddr + (reg ^ 0x2)); } -static u8 esdhc_readb(struct sdhci_host *host, int reg) +u8 sdhci_be32bs_readb(struct sdhci_host *host, int reg) { return in_8(host->ioaddr + (reg ^ 0x3)); } -static void esdhc_writel(struct sdhci_host *host, u32 val, int reg) +void sdhci_be32bs_writel(struct sdhci_host *host, u32 val, int reg) { out_be32(host->ioaddr + reg, val); } -static void esdhc_writew(struct sdhci_host *host, u16 val, int reg) +void sdhci_be32bs_writew(struct sdhci_host *host, u16 val, int reg) { struct sdhci_of_host *of_host = sdhci_priv(host); int base = reg & ~0x3; @@ -92,106 +67,21 @@ static void esdhc_writew(struct sdhci_host *host, u16 val, int reg) of_host->xfer_mode_shadow = val; return; case SDHCI_COMMAND: - esdhc_writel(host, val << 16 | of_host->xfer_mode_shadow, - SDHCI_TRANSFER_MODE); + sdhci_be32bs_writel(host, val << 16 | of_host->xfer_mode_shadow, + SDHCI_TRANSFER_MODE); return; - case SDHCI_BLOCK_SIZE: - /* - * Two last DMA bits are reserved, and first one is used for - * non-standard blksz of 4096 bytes that we don't support - * yet. So clear the DMA boundary bits. - */ - val &= ~SDHCI_MAKE_BLKSZ(0x7, 0); - /* fall through */ } clrsetbits_be32(host->ioaddr + base, 0xffff << shift, val << shift); } -static void esdhc_writeb(struct sdhci_host *host, u8 val, int reg) +void sdhci_be32bs_writeb(struct sdhci_host *host, u8 val, int reg) { int base = reg & ~0x3; int shift = (reg & 0x3) * 8; - /* Prevent SDHCI core from writing reserved bits (e.g. HISPD). */ - if (reg == SDHCI_HOST_CONTROL) - val &= ~ESDHC_HOST_CONTROL_RES; - clrsetbits_be32(host->ioaddr + base , 0xff << shift, val << shift); } - -static void esdhc_set_clock(struct sdhci_host *host, unsigned int clock) -{ - int pre_div = 2; - int div = 1; - - clrbits32(host->ioaddr + ESDHC_SYSTEM_CONTROL, ESDHC_CLOCK_IPGEN | - ESDHC_CLOCK_HCKEN | ESDHC_CLOCK_PEREN | ESDHC_CLOCK_MASK); - - if (clock == 0) - goto out; - - while (host->max_clk / pre_div / 16 > clock && pre_div < 256) - pre_div *= 2; - - while (host->max_clk / pre_div / div > clock && div < 16) - div++; - - dev_dbg(mmc_dev(host->mmc), "desired SD clock: %d, actual: %d\n", - clock, host->max_clk / pre_div / div); - - pre_div >>= 1; - div--; - - setbits32(host->ioaddr + ESDHC_SYSTEM_CONTROL, ESDHC_CLOCK_IPGEN | - ESDHC_CLOCK_HCKEN | ESDHC_CLOCK_PEREN | - div << ESDHC_DIVIDER_SHIFT | pre_div << ESDHC_PREDIV_SHIFT); - mdelay(100); -out: - host->clock = clock; -} - -static int esdhc_enable_dma(struct sdhci_host *host) -{ - setbits32(host->ioaddr + ESDHC_DMA_SYSCTL, ESDHC_DMA_SNOOP); - return 0; -} - -static unsigned int esdhc_get_max_clock(struct sdhci_host *host) -{ - struct sdhci_of_host *of_host = sdhci_priv(host); - - return of_host->clock; -} - -static unsigned int esdhc_get_min_clock(struct sdhci_host *host) -{ - struct sdhci_of_host *of_host = sdhci_priv(host); - - return of_host->clock / 256 / 16; -} - -static struct sdhci_of_data sdhci_esdhc = { - .quirks = SDHCI_QUIRK_FORCE_BLK_SZ_2048 | - SDHCI_QUIRK_BROKEN_CARD_DETECTION | - SDHCI_QUIRK_NO_BUSY_IRQ | - SDHCI_QUIRK_NONSTANDARD_CLOCK | - SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK | - SDHCI_QUIRK_PIO_NEEDS_DELAY | - SDHCI_QUIRK_RESTORE_IRQS_AFTER_RESET | - SDHCI_QUIRK_NO_CARD_NO_RESET, - .ops = { - .readl = esdhc_readl, - .readw = esdhc_readw, - .readb = esdhc_readb, - .writel = esdhc_writel, - .writew = esdhc_writew, - .writeb = esdhc_writeb, - .set_clock = esdhc_set_clock, - .enable_dma = esdhc_enable_dma, - .get_max_clock = esdhc_get_max_clock, - .get_min_clock = esdhc_get_min_clock, - }, -}; +#endif /* CONFIG_MMC_SDHCI_BIG_ENDIAN_32BIT_BYTE_SWAPPER */ #ifdef CONFIG_PM @@ -301,9 +191,14 @@ static int __devexit sdhci_of_remove(struct of_device *ofdev) } static const struct of_device_id sdhci_of_match[] = { +#ifdef CONFIG_MMC_SDHCI_OF_ESDHC { .compatible = "fsl,mpc8379-esdhc", .data = &sdhci_esdhc, }, { .compatible = "fsl,mpc8536-esdhc", .data = &sdhci_esdhc, }, { .compatible = "fsl,esdhc", .data = &sdhci_esdhc, }, +#endif +#ifdef CONFIG_MMC_SDHCI_OF_HLWD + { .compatible = "nintendo,hollywood-sdhci", .data = &sdhci_hlwd, }, +#endif { .compatible = "generic-sdhci", }, {}, }; diff --git a/drivers/mmc/host/sdhci-of-esdhc.c b/drivers/mmc/host/sdhci-of-esdhc.c new file mode 100644 index 000000000000..d5b11a17e648 --- /dev/null +++ b/drivers/mmc/host/sdhci-of-esdhc.c @@ -0,0 +1,143 @@ +/* + * Freescale eSDHC controller driver. + * + * Copyright (c) 2007 Freescale Semiconductor, Inc. + * Copyright (c) 2009 MontaVista Software, Inc. + * + * Authors: Xiaobo Xie <X.Xie@freescale.com> + * Anton Vorontsov <avorontsov@ru.mvista.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or (at + * your option) any later version. + */ + +#include <linux/io.h> +#include <linux/delay.h> +#include <linux/mmc/host.h> +#include "sdhci-of.h" +#include "sdhci.h" + +/* + * Ops and quirks for the Freescale eSDHC controller. + */ + +#define ESDHC_DMA_SYSCTL 0x40c +#define ESDHC_DMA_SNOOP 0x00000040 + +#define ESDHC_SYSTEM_CONTROL 0x2c +#define ESDHC_CLOCK_MASK 0x0000fff0 +#define ESDHC_PREDIV_SHIFT 8 +#define ESDHC_DIVIDER_SHIFT 4 +#define ESDHC_CLOCK_PEREN 0x00000004 +#define ESDHC_CLOCK_HCKEN 0x00000002 +#define ESDHC_CLOCK_IPGEN 0x00000001 + +#define ESDHC_HOST_CONTROL_RES 0x05 + +static u16 esdhc_readw(struct sdhci_host *host, int reg) +{ + u16 ret; + + if (unlikely(reg == SDHCI_HOST_VERSION)) + ret = in_be16(host->ioaddr + reg); + else + ret = sdhci_be32bs_readw(host, reg); + return ret; +} + +static void esdhc_writew(struct sdhci_host *host, u16 val, int reg) +{ + if (reg == SDHCI_BLOCK_SIZE) { + /* + * Two last DMA bits are reserved, and first one is used for + * non-standard blksz of 4096 bytes that we don't support + * yet. So clear the DMA boundary bits. + */ + val &= ~SDHCI_MAKE_BLKSZ(0x7, 0); + } + sdhci_be32bs_writew(host, val, reg); +} + +static void esdhc_writeb(struct sdhci_host *host, u8 val, int reg) +{ + /* Prevent SDHCI core from writing reserved bits (e.g. HISPD). */ + if (reg == SDHCI_HOST_CONTROL) + val &= ~ESDHC_HOST_CONTROL_RES; + sdhci_be32bs_writeb(host, val, reg); +} + +static void esdhc_set_clock(struct sdhci_host *host, unsigned int clock) +{ + int pre_div = 2; + int div = 1; + + clrbits32(host->ioaddr + ESDHC_SYSTEM_CONTROL, ESDHC_CLOCK_IPGEN | + ESDHC_CLOCK_HCKEN | ESDHC_CLOCK_PEREN | ESDHC_CLOCK_MASK); + + if (clock == 0) + goto out; + + while (host->max_clk / pre_div / 16 > clock && pre_div < 256) + pre_div *= 2; + + while (host->max_clk / pre_div / div > clock && div < 16) + div++; + + dev_dbg(mmc_dev(host->mmc), "desired SD clock: %d, actual: %d\n", + clock, host->max_clk / pre_div / div); + + pre_div >>= 1; + div--; + + setbits32(host->ioaddr + ESDHC_SYSTEM_CONTROL, ESDHC_CLOCK_IPGEN | + ESDHC_CLOCK_HCKEN | ESDHC_CLOCK_PEREN | + div << ESDHC_DIVIDER_SHIFT | pre_div << ESDHC_PREDIV_SHIFT); + mdelay(100); +out: + host->clock = clock; +} + +static int esdhc_enable_dma(struct sdhci_host *host) +{ + setbits32(host->ioaddr + ESDHC_DMA_SYSCTL, ESDHC_DMA_SNOOP); + return 0; +} + +static unsigned int esdhc_get_max_clock(struct sdhci_host *host) +{ + struct sdhci_of_host *of_host = sdhci_priv(host); + + return of_host->clock; +} + +static unsigned int esdhc_get_min_clock(struct sdhci_host *host) +{ + struct sdhci_of_host *of_host = sdhci_priv(host); + + return of_host->clock / 256 / 16; +} + +struct sdhci_of_data sdhci_esdhc = { + .quirks = SDHCI_QUIRK_FORCE_BLK_SZ_2048 | + SDHCI_QUIRK_BROKEN_CARD_DETECTION | + SDHCI_QUIRK_NO_BUSY_IRQ | + SDHCI_QUIRK_NONSTANDARD_CLOCK | + SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK | + SDHCI_QUIRK_PIO_NEEDS_DELAY | + SDHCI_QUIRK_RESTORE_IRQS_AFTER_RESET | + SDHCI_QUIRK_NO_CARD_NO_RESET, + .ops = { + .readl = sdhci_be32bs_readl, + .readw = esdhc_readw, + .readb = sdhci_be32bs_readb, + .writel = sdhci_be32bs_writel, + .writew = esdhc_writew, + .writeb = esdhc_writeb, + .set_clock = esdhc_set_clock, + .enable_dma = esdhc_enable_dma, + .get_max_clock = esdhc_get_max_clock, + .get_min_clock = esdhc_get_min_clock, + }, +}; diff --git a/drivers/mmc/host/sdhci-of-hlwd.c b/drivers/mmc/host/sdhci-of-hlwd.c new file mode 100644 index 000000000000..35117f3ed757 --- /dev/null +++ b/drivers/mmc/host/sdhci-of-hlwd.c @@ -0,0 +1,65 @@ +/* + * drivers/mmc/host/sdhci-of-hlwd.c + * + * Nintendo Wii Secure Digital Host Controller Interface. + * Copyright (C) 2009 The GameCube Linux Team + * Copyright (C) 2009 Albert Herranz + * + * Based on sdhci-of-esdhc.c + * + * Copyright (c) 2007 Freescale Semiconductor, Inc. + * Copyright (c) 2009 MontaVista Software, Inc. + * + * Authors: Xiaobo Xie <X.Xie@freescale.com> + * Anton Vorontsov <avorontsov@ru.mvista.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or (at + * your option) any later version. + */ + +#include <linux/delay.h> +#include <linux/mmc/host.h> +#include "sdhci-of.h" +#include "sdhci.h" + +/* + * Ops and quirks for the Nintendo Wii SDHCI controllers. + */ + +/* + * We need a small delay after each write, or things go horribly wrong. + */ +#define SDHCI_HLWD_WRITE_DELAY 5 /* usecs */ + +static void sdhci_hlwd_writel(struct sdhci_host *host, u32 val, int reg) +{ + sdhci_be32bs_writel(host, val, reg); + udelay(SDHCI_HLWD_WRITE_DELAY); +} + +static void sdhci_hlwd_writew(struct sdhci_host *host, u16 val, int reg) +{ + sdhci_be32bs_writew(host, val, reg); + udelay(SDHCI_HLWD_WRITE_DELAY); +} + +static void sdhci_hlwd_writeb(struct sdhci_host *host, u8 val, int reg) +{ + sdhci_be32bs_writeb(host, val, reg); + udelay(SDHCI_HLWD_WRITE_DELAY); +} + +struct sdhci_of_data sdhci_hlwd = { + .quirks = SDHCI_QUIRK_32BIT_DMA_ADDR | + SDHCI_QUIRK_32BIT_DMA_SIZE, + .ops = { + .readl = sdhci_be32bs_readl, + .readw = sdhci_be32bs_readw, + .readb = sdhci_be32bs_readb, + .writel = sdhci_hlwd_writel, + .writew = sdhci_hlwd_writew, + .writeb = sdhci_hlwd_writeb, + }, +}; diff --git a/drivers/mmc/host/sdhci-of.h b/drivers/mmc/host/sdhci-of.h new file mode 100644 index 000000000000..ad09ad9915d8 --- /dev/null +++ b/drivers/mmc/host/sdhci-of.h @@ -0,0 +1,42 @@ +/* + * OpenFirmware bindings for Secure Digital Host Controller Interface. + * + * Copyright (c) 2007 Freescale Semiconductor, Inc. + * Copyright (c) 2009 MontaVista Software, Inc. + * + * Authors: Xiaobo Xie <X.Xie@freescale.com> + * Anton Vorontsov <avorontsov@ru.mvista.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or (at + * your option) any later version. + */ + +#ifndef __SDHCI_OF_H +#define __SDHCI_OF_H + +#include <linux/types.h> +#include "sdhci.h" + +struct sdhci_of_data { + unsigned int quirks; + struct sdhci_ops ops; +}; + +struct sdhci_of_host { + unsigned int clock; + u16 xfer_mode_shadow; +}; + +extern u32 sdhci_be32bs_readl(struct sdhci_host *host, int reg); +extern u16 sdhci_be32bs_readw(struct sdhci_host *host, int reg); +extern u8 sdhci_be32bs_readb(struct sdhci_host *host, int reg); +extern void sdhci_be32bs_writel(struct sdhci_host *host, u32 val, int reg); +extern void sdhci_be32bs_writew(struct sdhci_host *host, u16 val, int reg); +extern void sdhci_be32bs_writeb(struct sdhci_host *host, u8 val, int reg); + +extern struct sdhci_of_data sdhci_esdhc; +extern struct sdhci_of_data sdhci_hlwd; + +#endif /* __SDHCI_OF_H */ diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h index ce5f1d73dc04..842f46f94284 100644 --- a/drivers/mmc/host/sdhci.h +++ b/drivers/mmc/host/sdhci.h @@ -8,6 +8,8 @@ * the Free Software Foundation; either version 2 of the License, or (at * your option) any later version. */ +#ifndef __SDHCI_H +#define __SDHCI_H #include <linux/scatterlist.h> #include <linux/compiler.h> @@ -408,3 +410,5 @@ extern void sdhci_remove_host(struct sdhci_host *host, int dead); extern int sdhci_suspend_host(struct sdhci_host *host, pm_message_t state); extern int sdhci_resume_host(struct sdhci_host *host); #endif + +#endif /* __SDHCI_H */ diff --git a/drivers/mtd/maps/pxa2xx-flash.c b/drivers/mtd/maps/pxa2xx-flash.c index 74fa075c838a..b13f6417b5b2 100644 --- a/drivers/mtd/maps/pxa2xx-flash.c +++ b/drivers/mtd/maps/pxa2xx-flash.c @@ -20,14 +20,23 @@ #include <asm/io.h> #include <mach/hardware.h> -#include <asm/cacheflush.h> #include <asm/mach/flash.h> +#define CACHELINESIZE 32 + static void pxa2xx_map_inval_cache(struct map_info *map, unsigned long from, ssize_t len) { - flush_ioremap_region(map->phys, map->cached, from, len); + unsigned long start = (unsigned long)map->cached + from; + unsigned long end = start + len; + + start &= ~(CACHELINESIZE - 1); + while (start < end) { + /* invalidate D cache line */ + asm volatile ("mcr p15, 0, %0, c7, c6, 1" : : "r" (start)); + start += CACHELINESIZE; + } } struct pxa2xx_flash_info { diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index 7678538344f4..677cd53f18c3 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -291,14 +291,6 @@ config MTD_NAND_SHARPSL tristate "Support for NAND Flash on Sharp SL Series (C7xx + others)" depends on ARCH_PXA -config MTD_NAND_BASLER_EXCITE - tristate "Support for NAND Flash on Basler eXcite" - depends on BASLER_EXCITE - help - This enables the driver for the NAND flash device found on the - Basler eXcite Smart Camera. If built as a module, the driver - will be named excite_nandflash. - config MTD_NAND_CAFE tristate "NAND support for OLPC CAFÉ chip" depends on PCI diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile index 460a1f39a8d1..1407bd144015 100644 --- a/drivers/mtd/nand/Makefile +++ b/drivers/mtd/nand/Makefile @@ -27,7 +27,6 @@ obj-$(CONFIG_MTD_NAND_ATMEL) += atmel_nand.o obj-$(CONFIG_MTD_NAND_GPIO) += gpio.o obj-$(CONFIG_MTD_NAND_OMAP2) += omap2.o obj-$(CONFIG_MTD_NAND_CM_X270) += cmx270_nand.o -obj-$(CONFIG_MTD_NAND_BASLER_EXCITE) += excite_nandflash.o obj-$(CONFIG_MTD_NAND_PXA3xx) += pxa3xx_nand.o obj-$(CONFIG_MTD_NAND_TMIO) += tmio_nand.o obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o diff --git a/drivers/mtd/nand/excite_nandflash.c b/drivers/mtd/nand/excite_nandflash.c deleted file mode 100644 index af6a6a5399e1..000000000000 --- a/drivers/mtd/nand/excite_nandflash.c +++ /dev/null @@ -1,248 +0,0 @@ -/* -* Copyright (C) 2005 - 2007 by Basler Vision Technologies AG -* Author: Thomas Koeller <thomas.koeller.qbaslerweb.com> -* Original code by Thies Moeller <thies.moeller@baslerweb.com> -* -* This program is free software; you can redistribute it and/or modify -* it under the terms of the GNU General Public License as published by -* the Free Software Foundation; either version 2 of the License, or -* (at your option) any later version. -* -* This program is distributed in the hope that it will be useful, -* but WITHOUT ANY WARRANTY; without even the implied warranty of -* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -* GNU General Public License for more details. -* -* You should have received a copy of the GNU General Public License -* along with this program; if not, write to the Free Software -* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - -#include <linux/module.h> -#include <linux/types.h> -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/string.h> -#include <linux/ioport.h> -#include <linux/platform_device.h> -#include <linux/delay.h> -#include <linux/err.h> - -#include <linux/mtd/mtd.h> -#include <linux/mtd/nand.h> -#include <linux/mtd/nand_ecc.h> -#include <linux/mtd/partitions.h> - -#include <asm/io.h> -#include <asm/rm9k-ocd.h> - -#include <excite_nandflash.h> - -#define EXCITE_NANDFLASH_VERSION "0.1" - -/* I/O register offsets */ -#define EXCITE_NANDFLASH_DATA_BYTE 0x00 -#define EXCITE_NANDFLASH_STATUS_BYTE 0x0c -#define EXCITE_NANDFLASH_ADDR_BYTE 0x10 -#define EXCITE_NANDFLASH_CMD_BYTE 0x14 - -/* prefix for debug output */ -static const char module_id[] = "excite_nandflash"; - -/* - * partition definition - */ -static const struct mtd_partition partition_info[] = { - { - .name = "eXcite RootFS", - .offset = 0, - .size = MTDPART_SIZ_FULL - } -}; - -static inline const struct resource * -excite_nand_get_resource(struct platform_device *d, unsigned long flags, - const char *basename) -{ - char buf[80]; - - if (snprintf(buf, sizeof buf, "%s_%u", basename, d->id) >= sizeof buf) - return NULL; - return platform_get_resource_byname(d, flags, buf); -} - -static inline void __iomem * -excite_nand_map_regs(struct platform_device *d, const char *basename) -{ - void *result = NULL; - const struct resource *const r = - excite_nand_get_resource(d, IORESOURCE_MEM, basename); - - if (r) - result = ioremap_nocache(r->start, r->end + 1 - r->start); - return result; -} - -/* controller and mtd information */ -struct excite_nand_drvdata { - struct mtd_info board_mtd; - struct nand_chip board_chip; - void __iomem *regs; - void __iomem *tgt; -}; - -/* Control function */ -static void excite_nand_control(struct mtd_info *mtd, int cmd, - unsigned int ctrl) -{ - struct excite_nand_drvdata * const d = - container_of(mtd, struct excite_nand_drvdata, board_mtd); - - switch (ctrl) { - case NAND_CTRL_CHANGE | NAND_CTRL_CLE: - d->tgt = d->regs + EXCITE_NANDFLASH_CMD_BYTE; - break; - case NAND_CTRL_CHANGE | NAND_CTRL_ALE: - d->tgt = d->regs + EXCITE_NANDFLASH_ADDR_BYTE; - break; - case NAND_CTRL_CHANGE | NAND_NCE: - d->tgt = d->regs + EXCITE_NANDFLASH_DATA_BYTE; - break; - } - - if (cmd != NAND_CMD_NONE) - __raw_writeb(cmd, d->tgt); -} - -/* Return 0 if flash is busy, 1 if ready */ -static int excite_nand_devready(struct mtd_info *mtd) -{ - struct excite_nand_drvdata * const drvdata = - container_of(mtd, struct excite_nand_drvdata, board_mtd); - - return __raw_readb(drvdata->regs + EXCITE_NANDFLASH_STATUS_BYTE); -} - -/* - * Called by device layer to remove the driver. - * The binding to the mtd and all allocated - * resources are released. - */ -static int __devexit excite_nand_remove(struct platform_device *dev) -{ - struct excite_nand_drvdata * const this = platform_get_drvdata(dev); - - platform_set_drvdata(dev, NULL); - - if (unlikely(!this)) { - printk(KERN_ERR "%s: called %s without private data!!", - module_id, __func__); - return -EINVAL; - } - - /* first thing we need to do is release our mtd - * then go through freeing the resource used - */ - nand_release(&this->board_mtd); - - /* free the common resources */ - iounmap(this->regs); - kfree(this); - - DEBUG(MTD_DEBUG_LEVEL1, "%s: removed\n", module_id); - return 0; -} - -/* - * Called by device layer when it finds a device matching - * one our driver can handle. This code checks to see if - * it can allocate all necessary resources then calls the - * nand layer to look for devices. -*/ -static int __init excite_nand_probe(struct platform_device *pdev) -{ - struct excite_nand_drvdata *drvdata; /* private driver data */ - struct nand_chip *board_chip; /* private flash chip data */ - struct mtd_info *board_mtd; /* mtd info for this board */ - int scan_res; - - drvdata = kzalloc(sizeof(*drvdata), GFP_KERNEL); - if (unlikely(!drvdata)) { - printk(KERN_ERR "%s: no memory for drvdata\n", - module_id); - return -ENOMEM; - } - - /* bind private data into driver */ - platform_set_drvdata(pdev, drvdata); - - /* allocate and map the resource */ - drvdata->regs = - excite_nand_map_regs(pdev, EXCITE_NANDFLASH_RESOURCE_REGS); - - if (unlikely(!drvdata->regs)) { - printk(KERN_ERR "%s: cannot reserve register region\n", - module_id); - kfree(drvdata); - return -ENXIO; - } - - drvdata->tgt = drvdata->regs + EXCITE_NANDFLASH_DATA_BYTE; - - /* initialise our chip */ - board_chip = &drvdata->board_chip; - board_chip->IO_ADDR_R = board_chip->IO_ADDR_W = - drvdata->regs + EXCITE_NANDFLASH_DATA_BYTE; - board_chip->cmd_ctrl = excite_nand_control; - board_chip->dev_ready = excite_nand_devready; - board_chip->chip_delay = 25; - board_chip->ecc.mode = NAND_ECC_SOFT; - - /* link chip to mtd */ - board_mtd = &drvdata->board_mtd; - board_mtd->priv = board_chip; - - DEBUG(MTD_DEBUG_LEVEL2, "%s: device scan\n", module_id); - scan_res = nand_scan(&drvdata->board_mtd, 1); - - if (likely(!scan_res)) { - DEBUG(MTD_DEBUG_LEVEL2, "%s: register partitions\n", module_id); - add_mtd_partitions(&drvdata->board_mtd, partition_info, - ARRAY_SIZE(partition_info)); - } else { - iounmap(drvdata->regs); - kfree(drvdata); - printk(KERN_ERR "%s: device scan failed\n", module_id); - return -EIO; - } - return 0; -} - -static struct platform_driver excite_nand_driver = { - .driver = { - .name = "excite_nand", - .owner = THIS_MODULE, - }, - .probe = excite_nand_probe, - .remove = __devexit_p(excite_nand_remove) -}; - -static int __init excite_nand_init(void) -{ - pr_info("Basler eXcite nand flash driver Version " - EXCITE_NANDFLASH_VERSION "\n"); - return platform_driver_register(&excite_nand_driver); -} - -static void __exit excite_nand_exit(void) -{ - platform_driver_unregister(&excite_nand_driver); -} - -module_init(excite_nand_init); -module_exit(excite_nand_exit); - -MODULE_AUTHOR("Thomas Koeller <thomas.koeller@baslerweb.com>"); -MODULE_DESCRIPTION("Basler eXcite NAND-Flash driver"); -MODULE_LICENSE("GPL"); -MODULE_VERSION(EXCITE_NANDFLASH_VERSION) diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index a5be9ac6405c..e58a65391ad2 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -1953,6 +1953,8 @@ config BCM63XX_ENET source "drivers/net/fs_enet/Kconfig" +source "drivers/net/octeon/Kconfig" + endif # NET_ETHERNET # diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 246323d7f161..ad1346dd9da9 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -285,3 +285,5 @@ obj-$(CONFIG_VIRTIO_NET) += virtio_net.o obj-$(CONFIG_SFC) += sfc/ obj-$(CONFIG_WIMAX) += wimax/ + +obj-$(CONFIG_OCTEON_MGMT_ETHERNET) += octeon/ diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c index 4bfc80812926..65df1de447e4 100644 --- a/drivers/net/bnx2.c +++ b/drivers/net/bnx2.c @@ -653,12 +653,20 @@ static void bnx2_netif_stop(struct bnx2 *bp) { bnx2_cnic_stop(bp); - bnx2_disable_int_sync(bp); if (netif_running(bp->dev)) { + int i; + bnx2_napi_disable(bp); netif_tx_disable(bp->dev); - bp->dev->trans_start = jiffies; /* prevent tx timeout */ + /* prevent tx timeout */ + for (i = 0; i < bp->dev->num_tx_queues; i++) { + struct netdev_queue *txq; + + txq = netdev_get_tx_queue(bp->dev, i); + txq->trans_start = jiffies; + } } + bnx2_disable_int_sync(bp); } static void diff --git a/drivers/net/can/at91_can.c b/drivers/net/can/at91_can.c index d0ec17878ffc..166cc7e579c0 100644 --- a/drivers/net/can/at91_can.c +++ b/drivers/net/can/at91_can.c @@ -1037,7 +1037,7 @@ static int __init at91_can_probe(struct platform_device *pdev) res = platform_get_resource(pdev, IORESOURCE_MEM, 0); irq = platform_get_irq(pdev, 0); - if (!res || !irq) { + if (!res || irq <= 0) { err = -ENODEV; goto exit_put; } diff --git a/drivers/net/davinci_emac.c b/drivers/net/davinci_emac.c index 8edac8915ea8..34e03104c3c1 100644 --- a/drivers/net/davinci_emac.c +++ b/drivers/net/davinci_emac.c @@ -2272,7 +2272,7 @@ static int emac_mii_reset(struct mii_bus *bus) unsigned int clk_div; int mdio_bus_freq = emac_bus_frequency; - if (mdio_max_freq & mdio_bus_freq) + if (mdio_max_freq && mdio_bus_freq) clk_div = ((mdio_bus_freq / mdio_max_freq) - 1); else clk_div = 0xFF; diff --git a/drivers/net/e100.c b/drivers/net/e100.c index 929701ca07d3..839fb2b136d3 100644 --- a/drivers/net/e100.c +++ b/drivers/net/e100.c @@ -1829,6 +1829,7 @@ static int e100_alloc_cbs(struct nic *nic) &nic->cbs_dma_addr); if (!nic->cbs) return -ENOMEM; + memset(nic->cbs, 0, count * sizeof(struct cb)); for (cb = nic->cbs, i = 0; i < count; cb++, i++) { cb->next = (i + 1 < count) ? cb + 1 : nic->cbs; @@ -1837,7 +1838,6 @@ static int e100_alloc_cbs(struct nic *nic) cb->dma_addr = nic->cbs_dma_addr + i * sizeof(struct cb); cb->link = cpu_to_le32(nic->cbs_dma_addr + ((i+1) % count) * sizeof(struct cb)); - cb->skb = NULL; } nic->cb_to_use = nic->cb_to_send = nic->cb_to_clean = nic->cbs; diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c index c1a42cfc80ba..b979464091bb 100644 --- a/drivers/net/e1000e/82571.c +++ b/drivers/net/e1000e/82571.c @@ -1290,7 +1290,6 @@ static s32 e1000_setup_link_82571(struct e1000_hw *hw) static s32 e1000_setup_copper_link_82571(struct e1000_hw *hw) { u32 ctrl; - u32 led_ctrl; s32 ret_val; ctrl = er32(CTRL); @@ -1305,11 +1304,6 @@ static s32 e1000_setup_copper_link_82571(struct e1000_hw *hw) break; case e1000_phy_igp_2: ret_val = e1000e_copper_link_setup_igp(hw); - /* Setup activity LED */ - led_ctrl = er32(LEDCTL); - led_ctrl &= IGP_ACTIVITY_LED_MASK; - led_ctrl |= (IGP_ACTIVITY_LED_ENABLE | IGP_LED3_MODE); - ew32(LEDCTL, led_ctrl); break; default: return -E1000_ERR_PHY; diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c index 6850dc0a7b91..e0620d084644 100644 --- a/drivers/net/gianfar.c +++ b/drivers/net/gianfar.c @@ -357,8 +357,11 @@ static void gfar_init_mac(struct net_device *ndev) /* Configure the coalescing support */ gfar_configure_coalescing(priv, 0xFF, 0xFF); - if (priv->rx_filer_enable) + if (priv->rx_filer_enable) { rctrl |= RCTRL_FILREN; + /* Program the RIR0 reg with the required distribution */ + gfar_write(®s->rir0, DEFAULT_RIR0); + } if (priv->rx_csum_enable) rctrl |= RCTRL_CHECKSUMMING; @@ -414,6 +417,36 @@ static void gfar_init_mac(struct net_device *ndev) gfar_write(®s->fifo_tx_starve_shutoff, priv->fifo_starve_off); } +static struct net_device_stats *gfar_get_stats(struct net_device *dev) +{ + struct gfar_private *priv = netdev_priv(dev); + struct netdev_queue *txq; + unsigned long rx_packets = 0, rx_bytes = 0, rx_dropped = 0; + unsigned long tx_packets = 0, tx_bytes = 0; + int i = 0; + + for (i = 0; i < priv->num_rx_queues; i++) { + rx_packets += priv->rx_queue[i]->stats.rx_packets; + rx_bytes += priv->rx_queue[i]->stats.rx_bytes; + rx_dropped += priv->rx_queue[i]->stats.rx_dropped; + } + + dev->stats.rx_packets = rx_packets; + dev->stats.rx_bytes = rx_bytes; + dev->stats.rx_dropped = rx_dropped; + + for (i = 0; i < priv->num_tx_queues; i++) { + txq = netdev_get_tx_queue(dev, i); + tx_bytes += txq->tx_bytes; + tx_packets += txq->tx_packets; + } + + dev->stats.tx_bytes = tx_bytes; + dev->stats.tx_packets = tx_packets; + + return &dev->stats; +} + static const struct net_device_ops gfar_netdev_ops = { .ndo_open = gfar_enet_open, .ndo_start_xmit = gfar_start_xmit, @@ -423,6 +456,7 @@ static const struct net_device_ops gfar_netdev_ops = { .ndo_tx_timeout = gfar_timeout, .ndo_do_ioctl = gfar_ioctl, .ndo_select_queue = gfar_select_queue, + .ndo_get_stats = gfar_get_stats, .ndo_vlan_rx_register = gfar_vlan_rx_register, .ndo_set_mac_address = eth_mac_addr, .ndo_validate_addr = eth_validate_addr, @@ -1022,6 +1056,9 @@ static int gfar_probe(struct of_device *ofdev, priv->rx_queue[i]->rxic = DEFAULT_RXIC; } + /* enable filer if using multiple RX queues*/ + if(priv->num_rx_queues > 1) + priv->rx_filer_enable = 1; /* Enable most messages by default */ priv->msg_enable = (NETIF_MSG_IFUP << 1 ) - 1; @@ -1937,7 +1974,8 @@ static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev) } /* Update transmit stats */ - dev->stats.tx_bytes += skb->len; + txq->tx_bytes += skb->len; + txq->tx_packets ++; txbdp = txbdp_start = tx_queue->cur_tx; @@ -2295,8 +2333,6 @@ static int gfar_clean_tx_ring(struct gfar_priv_tx_q *tx_queue) tx_queue->skb_dirtytx = skb_dirtytx; tx_queue->dirty_tx = bdp; - dev->stats.tx_packets += howmany; - return howmany; } @@ -2510,14 +2546,14 @@ int gfar_clean_rx_ring(struct gfar_priv_rx_q *rx_queue, int rx_work_limit) } } else { /* Increment the number of packets */ - dev->stats.rx_packets++; + rx_queue->stats.rx_packets++; howmany++; if (likely(skb)) { pkt_len = bdp->length - ETH_FCS_LEN; /* Remove the FCS from the packet length */ skb_put(skb, pkt_len); - dev->stats.rx_bytes += pkt_len; + rx_queue->stats.rx_bytes += pkt_len; gfar_process_frame(dev, skb, amount_pull); @@ -2525,7 +2561,7 @@ int gfar_clean_rx_ring(struct gfar_priv_rx_q *rx_queue, int rx_work_limit) if (netif_msg_rx_err(priv)) printk(KERN_WARNING "%s: Missing skb!\n", dev->name); - dev->stats.rx_dropped++; + rx_queue->stats.rx_dropped++; priv->extra_stats.rx_skbmissing++; } diff --git a/drivers/net/gianfar.h b/drivers/net/gianfar.h index cbb451011cb5..3d72dc43dca5 100644 --- a/drivers/net/gianfar.h +++ b/drivers/net/gianfar.h @@ -333,7 +333,7 @@ extern const char gfar_driver_version[]; #define IMASK_BSY 0x20000000 #define IMASK_EBERR 0x10000000 #define IMASK_MSRO 0x04000000 -#define IMASK_GRSC 0x02000000 +#define IMASK_GTSC 0x02000000 #define IMASK_BABT 0x01000000 #define IMASK_TXC 0x00800000 #define IMASK_TXEEN 0x00400000 @@ -344,7 +344,7 @@ extern const char gfar_driver_version[]; #define IMASK_XFUN 0x00010000 #define IMASK_RXB0 0x00008000 #define IMASK_MAG 0x00000800 -#define IMASK_GTSC 0x00000100 +#define IMASK_GRSC 0x00000100 #define IMASK_RXFEN0 0x00000080 #define IMASK_FIR 0x00000008 #define IMASK_FIQ 0x00000004 @@ -401,6 +401,10 @@ extern const char gfar_driver_version[]; #define FPR_FILER_MASK 0xFFFFFFFF #define MAX_FILER_IDX 0xFF +/* This default RIR value directly corresponds + * to the 3-bit hash value generated */ +#define DEFAULT_RIR0 0x05397700 + /* RQFCR register bits */ #define RQFCR_GPI 0x80000000 #define RQFCR_HASHTBL_Q 0x00000000 @@ -936,6 +940,15 @@ struct gfar_priv_tx_q { unsigned short txtime; }; +/* + * Per RX queue stats + */ +struct rx_q_stats { + unsigned long rx_packets; + unsigned long rx_bytes; + unsigned long rx_dropped; +}; + /** * struct gfar_priv_rx_q - per rx queue structure * @rxlock: per queue rx spin lock @@ -958,6 +971,7 @@ struct gfar_priv_rx_q { struct rxbd8 *cur_rx; struct net_device *dev; struct gfar_priv_grp *grp; + struct rx_q_stats stats; u16 skb_currx; u16 qindex; unsigned int rx_ring_size; diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c index f4996846a234..6cae26a5bd67 100644 --- a/drivers/net/netxen/netxen_nic_main.c +++ b/drivers/net/netxen/netxen_nic_main.c @@ -57,7 +57,9 @@ static int use_msi = 1; static int use_msi_x = 1; -static unsigned long auto_fw_reset = AUTO_FW_RESET_ENABLED; +static int auto_fw_reset = AUTO_FW_RESET_ENABLED; +module_param(auto_fw_reset, int, 0644); +MODULE_PARM_DESC(auto_fw_reset,"Auto firmware reset (0=disabled, 1=enabled"); static int __devinit netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent); @@ -2534,42 +2536,6 @@ static struct bin_attribute bin_attr_mem = { .write = netxen_sysfs_write_mem, }; -#ifdef CONFIG_MODULES -static ssize_t -netxen_store_auto_fw_reset(struct module_attribute *mattr, - struct module *mod, const char *buf, size_t count) - -{ - unsigned long new; - - if (strict_strtoul(buf, 16, &new)) - return -EINVAL; - - if ((new == AUTO_FW_RESET_ENABLED) || (new == AUTO_FW_RESET_DISABLED)) { - auto_fw_reset = new; - return count; - } - - return -EINVAL; -} - -static ssize_t -netxen_show_auto_fw_reset(struct module_attribute *mattr, - struct module *mod, char *buf) - -{ - if (auto_fw_reset == AUTO_FW_RESET_ENABLED) - return sprintf(buf, "enabled\n"); - else - return sprintf(buf, "disabled\n"); -} - -static struct module_attribute mod_attr_fw_reset = { - .attr = {.name = "auto_fw_reset", .mode = (S_IRUGO | S_IWUSR)}, - .show = netxen_show_auto_fw_reset, - .store = netxen_store_auto_fw_reset, -}; -#endif static void netxen_create_sysfs_entries(struct netxen_adapter *adapter) @@ -2775,23 +2741,12 @@ static struct pci_driver netxen_driver = { static int __init netxen_init_module(void) { -#ifdef CONFIG_MODULES - struct module *mod = THIS_MODULE; -#endif - printk(KERN_INFO "%s\n", netxen_nic_driver_string); #ifdef CONFIG_INET register_netdevice_notifier(&netxen_netdev_cb); register_inetaddr_notifier(&netxen_inetaddr_cb); #endif - -#ifdef CONFIG_MODULES - if (sysfs_create_file(&mod->mkobj.kobj, &mod_attr_fw_reset.attr)) - printk(KERN_ERR "%s: Failed to create auto_fw_reset " - "sysfs entry.", netxen_nic_driver_name); -#endif - return pci_register_driver(&netxen_driver); } @@ -2799,12 +2754,6 @@ module_init(netxen_init_module); static void __exit netxen_exit_module(void) { -#ifdef CONFIG_MODULES - struct module *mod = THIS_MODULE; - - sysfs_remove_file(&mod->mkobj.kobj, &mod_attr_fw_reset.attr); -#endif - pci_unregister_driver(&netxen_driver); #ifdef CONFIG_INET diff --git a/drivers/net/octeon/Kconfig b/drivers/net/octeon/Kconfig new file mode 100644 index 000000000000..1e56bbf3f5c0 --- /dev/null +++ b/drivers/net/octeon/Kconfig @@ -0,0 +1,10 @@ +config OCTEON_MGMT_ETHERNET + tristate "Octeon Management port ethernet driver (CN5XXX, CN6XXX)" + depends on CPU_CAVIUM_OCTEON + select PHYLIB + select MDIO_OCTEON + default y + help + This option enables the ethernet driver for the management + port on Cavium Networks' Octeon CN57XX, CN56XX, CN55XX, + CN54XX, CN52XX, and CN6XXX chips. diff --git a/drivers/net/octeon/Makefile b/drivers/net/octeon/Makefile new file mode 100644 index 000000000000..906edecacfd3 --- /dev/null +++ b/drivers/net/octeon/Makefile @@ -0,0 +1,2 @@ + +obj-$(CONFIG_OCTEON_MGMT_ETHERNET) += octeon_mgmt.o diff --git a/drivers/net/octeon/octeon_mgmt.c b/drivers/net/octeon/octeon_mgmt.c new file mode 100644 index 000000000000..050538bf155a --- /dev/null +++ b/drivers/net/octeon/octeon_mgmt.c @@ -0,0 +1,1176 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2009 Cavium Networks + */ + +#include <linux/capability.h> +#include <linux/dma-mapping.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/if_vlan.h> +#include <linux/phy.h> +#include <linux/spinlock.h> + +#include <asm/octeon/octeon.h> +#include <asm/octeon/cvmx-mixx-defs.h> +#include <asm/octeon/cvmx-agl-defs.h> + +#define DRV_NAME "octeon_mgmt" +#define DRV_VERSION "2.0" +#define DRV_DESCRIPTION \ + "Cavium Networks Octeon MII (management) port Network Driver" + +#define OCTEON_MGMT_NAPI_WEIGHT 16 + +/* + * Ring sizes that are powers of two allow for more efficient modulo + * opertions. + */ +#define OCTEON_MGMT_RX_RING_SIZE 512 +#define OCTEON_MGMT_TX_RING_SIZE 128 + +/* Allow 8 bytes for vlan and FCS. */ +#define OCTEON_MGMT_RX_HEADROOM (ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN) + +union mgmt_port_ring_entry { + u64 d64; + struct { + u64 reserved_62_63:2; + /* Length of the buffer/packet in bytes */ + u64 len:14; + /* For TX, signals that the packet should be timestamped */ + u64 tstamp:1; + /* The RX error code */ + u64 code:7; +#define RING_ENTRY_CODE_DONE 0xf +#define RING_ENTRY_CODE_MORE 0x10 + /* Physical address of the buffer */ + u64 addr:40; + } s; +}; + +struct octeon_mgmt { + struct net_device *netdev; + int port; + int irq; + u64 *tx_ring; + dma_addr_t tx_ring_handle; + unsigned int tx_next; + unsigned int tx_next_clean; + unsigned int tx_current_fill; + /* The tx_list lock also protects the ring related variables */ + struct sk_buff_head tx_list; + + /* RX variables only touched in napi_poll. No locking necessary. */ + u64 *rx_ring; + dma_addr_t rx_ring_handle; + unsigned int rx_next; + unsigned int rx_next_fill; + unsigned int rx_current_fill; + struct sk_buff_head rx_list; + + spinlock_t lock; + unsigned int last_duplex; + unsigned int last_link; + struct device *dev; + struct napi_struct napi; + struct tasklet_struct tx_clean_tasklet; + struct phy_device *phydev; +}; + +static void octeon_mgmt_set_rx_irq(struct octeon_mgmt *p, int enable) +{ + int port = p->port; + union cvmx_mixx_intena mix_intena; + unsigned long flags; + + spin_lock_irqsave(&p->lock, flags); + mix_intena.u64 = cvmx_read_csr(CVMX_MIXX_INTENA(port)); + mix_intena.s.ithena = enable ? 1 : 0; + cvmx_write_csr(CVMX_MIXX_INTENA(port), mix_intena.u64); + spin_unlock_irqrestore(&p->lock, flags); +} + +static void octeon_mgmt_set_tx_irq(struct octeon_mgmt *p, int enable) +{ + int port = p->port; + union cvmx_mixx_intena mix_intena; + unsigned long flags; + + spin_lock_irqsave(&p->lock, flags); + mix_intena.u64 = cvmx_read_csr(CVMX_MIXX_INTENA(port)); + mix_intena.s.othena = enable ? 1 : 0; + cvmx_write_csr(CVMX_MIXX_INTENA(port), mix_intena.u64); + spin_unlock_irqrestore(&p->lock, flags); +} + +static inline void octeon_mgmt_enable_rx_irq(struct octeon_mgmt *p) +{ + octeon_mgmt_set_rx_irq(p, 1); +} + +static inline void octeon_mgmt_disable_rx_irq(struct octeon_mgmt *p) +{ + octeon_mgmt_set_rx_irq(p, 0); +} + +static inline void octeon_mgmt_enable_tx_irq(struct octeon_mgmt *p) +{ + octeon_mgmt_set_tx_irq(p, 1); +} + +static inline void octeon_mgmt_disable_tx_irq(struct octeon_mgmt *p) +{ + octeon_mgmt_set_tx_irq(p, 0); +} + +static unsigned int ring_max_fill(unsigned int ring_size) +{ + return ring_size - 8; +} + +static unsigned int ring_size_to_bytes(unsigned int ring_size) +{ + return ring_size * sizeof(union mgmt_port_ring_entry); +} + +static void octeon_mgmt_rx_fill_ring(struct net_device *netdev) +{ + struct octeon_mgmt *p = netdev_priv(netdev); + int port = p->port; + + while (p->rx_current_fill < ring_max_fill(OCTEON_MGMT_RX_RING_SIZE)) { + unsigned int size; + union mgmt_port_ring_entry re; + struct sk_buff *skb; + + /* CN56XX pass 1 needs 8 bytes of padding. */ + size = netdev->mtu + OCTEON_MGMT_RX_HEADROOM + 8 + NET_IP_ALIGN; + + skb = netdev_alloc_skb(netdev, size); + if (!skb) + break; + skb_reserve(skb, NET_IP_ALIGN); + __skb_queue_tail(&p->rx_list, skb); + + re.d64 = 0; + re.s.len = size; + re.s.addr = dma_map_single(p->dev, skb->data, + size, + DMA_FROM_DEVICE); + + /* Put it in the ring. */ + p->rx_ring[p->rx_next_fill] = re.d64; + dma_sync_single_for_device(p->dev, p->rx_ring_handle, + ring_size_to_bytes(OCTEON_MGMT_RX_RING_SIZE), + DMA_BIDIRECTIONAL); + p->rx_next_fill = + (p->rx_next_fill + 1) % OCTEON_MGMT_RX_RING_SIZE; + p->rx_current_fill++; + /* Ring the bell. */ + cvmx_write_csr(CVMX_MIXX_IRING2(port), 1); + } +} + +static void octeon_mgmt_clean_tx_buffers(struct octeon_mgmt *p) +{ + int port = p->port; + union cvmx_mixx_orcnt mix_orcnt; + union mgmt_port_ring_entry re; + struct sk_buff *skb; + int cleaned = 0; + unsigned long flags; + + mix_orcnt.u64 = cvmx_read_csr(CVMX_MIXX_ORCNT(port)); + while (mix_orcnt.s.orcnt) { + dma_sync_single_for_cpu(p->dev, p->tx_ring_handle, + ring_size_to_bytes(OCTEON_MGMT_TX_RING_SIZE), + DMA_BIDIRECTIONAL); + + spin_lock_irqsave(&p->tx_list.lock, flags); + + re.d64 = p->tx_ring[p->tx_next_clean]; + p->tx_next_clean = + (p->tx_next_clean + 1) % OCTEON_MGMT_TX_RING_SIZE; + skb = __skb_dequeue(&p->tx_list); + + mix_orcnt.u64 = 0; + mix_orcnt.s.orcnt = 1; + + /* Acknowledge to hardware that we have the buffer. */ + cvmx_write_csr(CVMX_MIXX_ORCNT(port), mix_orcnt.u64); + p->tx_current_fill--; + + spin_unlock_irqrestore(&p->tx_list.lock, flags); + + dma_unmap_single(p->dev, re.s.addr, re.s.len, + DMA_TO_DEVICE); + dev_kfree_skb_any(skb); + cleaned++; + + mix_orcnt.u64 = cvmx_read_csr(CVMX_MIXX_ORCNT(port)); + } + + if (cleaned && netif_queue_stopped(p->netdev)) + netif_wake_queue(p->netdev); +} + +static void octeon_mgmt_clean_tx_tasklet(unsigned long arg) +{ + struct octeon_mgmt *p = (struct octeon_mgmt *)arg; + octeon_mgmt_clean_tx_buffers(p); + octeon_mgmt_enable_tx_irq(p); +} + +static void octeon_mgmt_update_rx_stats(struct net_device *netdev) +{ + struct octeon_mgmt *p = netdev_priv(netdev); + int port = p->port; + unsigned long flags; + u64 drop, bad; + + /* These reads also clear the count registers. */ + drop = cvmx_read_csr(CVMX_AGL_GMX_RXX_STATS_PKTS_DRP(port)); + bad = cvmx_read_csr(CVMX_AGL_GMX_RXX_STATS_PKTS_BAD(port)); + + if (drop || bad) { + /* Do an atomic update. */ + spin_lock_irqsave(&p->lock, flags); + netdev->stats.rx_errors += bad; + netdev->stats.rx_dropped += drop; + spin_unlock_irqrestore(&p->lock, flags); + } +} + +static void octeon_mgmt_update_tx_stats(struct net_device *netdev) +{ + struct octeon_mgmt *p = netdev_priv(netdev); + int port = p->port; + unsigned long flags; + + union cvmx_agl_gmx_txx_stat0 s0; + union cvmx_agl_gmx_txx_stat1 s1; + + /* These reads also clear the count registers. */ + s0.u64 = cvmx_read_csr(CVMX_AGL_GMX_TXX_STAT0(port)); + s1.u64 = cvmx_read_csr(CVMX_AGL_GMX_TXX_STAT1(port)); + + if (s0.s.xsdef || s0.s.xscol || s1.s.scol || s1.s.mcol) { + /* Do an atomic update. */ + spin_lock_irqsave(&p->lock, flags); + netdev->stats.tx_errors += s0.s.xsdef + s0.s.xscol; + netdev->stats.collisions += s1.s.scol + s1.s.mcol; + spin_unlock_irqrestore(&p->lock, flags); + } +} + +/* + * Dequeue a receive skb and its corresponding ring entry. The ring + * entry is returned, *pskb is updated to point to the skb. + */ +static u64 octeon_mgmt_dequeue_rx_buffer(struct octeon_mgmt *p, + struct sk_buff **pskb) +{ + union mgmt_port_ring_entry re; + + dma_sync_single_for_cpu(p->dev, p->rx_ring_handle, + ring_size_to_bytes(OCTEON_MGMT_RX_RING_SIZE), + DMA_BIDIRECTIONAL); + + re.d64 = p->rx_ring[p->rx_next]; + p->rx_next = (p->rx_next + 1) % OCTEON_MGMT_RX_RING_SIZE; + p->rx_current_fill--; + *pskb = __skb_dequeue(&p->rx_list); + + dma_unmap_single(p->dev, re.s.addr, + ETH_FRAME_LEN + OCTEON_MGMT_RX_HEADROOM, + DMA_FROM_DEVICE); + + return re.d64; +} + + +static int octeon_mgmt_receive_one(struct octeon_mgmt *p) +{ + int port = p->port; + struct net_device *netdev = p->netdev; + union cvmx_mixx_ircnt mix_ircnt; + union mgmt_port_ring_entry re; + struct sk_buff *skb; + struct sk_buff *skb2; + struct sk_buff *skb_new; + union mgmt_port_ring_entry re2; + int rc = 1; + + + re.d64 = octeon_mgmt_dequeue_rx_buffer(p, &skb); + if (likely(re.s.code == RING_ENTRY_CODE_DONE)) { + /* A good packet, send it up. */ + skb_put(skb, re.s.len); +good: + skb->protocol = eth_type_trans(skb, netdev); + netdev->stats.rx_packets++; + netdev->stats.rx_bytes += skb->len; + netdev->last_rx = jiffies; + netif_receive_skb(skb); + rc = 0; + } else if (re.s.code == RING_ENTRY_CODE_MORE) { + /* + * Packet split across skbs. This can happen if we + * increase the MTU. Buffers that are already in the + * rx ring can then end up being too small. As the rx + * ring is refilled, buffers sized for the new MTU + * will be used and we should go back to the normal + * non-split case. + */ + skb_put(skb, re.s.len); + do { + re2.d64 = octeon_mgmt_dequeue_rx_buffer(p, &skb2); + if (re2.s.code != RING_ENTRY_CODE_MORE + && re2.s.code != RING_ENTRY_CODE_DONE) + goto split_error; + skb_put(skb2, re2.s.len); + skb_new = skb_copy_expand(skb, 0, skb2->len, + GFP_ATOMIC); + if (!skb_new) + goto split_error; + if (skb_copy_bits(skb2, 0, skb_tail_pointer(skb_new), + skb2->len)) + goto split_error; + skb_put(skb_new, skb2->len); + dev_kfree_skb_any(skb); + dev_kfree_skb_any(skb2); + skb = skb_new; + } while (re2.s.code == RING_ENTRY_CODE_MORE); + goto good; + } else { + /* Some other error, discard it. */ + dev_kfree_skb_any(skb); + /* + * Error statistics are accumulated in + * octeon_mgmt_update_rx_stats. + */ + } + goto done; +split_error: + /* Discard the whole mess. */ + dev_kfree_skb_any(skb); + dev_kfree_skb_any(skb2); + while (re2.s.code == RING_ENTRY_CODE_MORE) { + re2.d64 = octeon_mgmt_dequeue_rx_buffer(p, &skb2); + dev_kfree_skb_any(skb2); + } + netdev->stats.rx_errors++; + +done: + /* Tell the hardware we processed a packet. */ + mix_ircnt.u64 = 0; + mix_ircnt.s.ircnt = 1; + cvmx_write_csr(CVMX_MIXX_IRCNT(port), mix_ircnt.u64); + return rc; + +} + +static int octeon_mgmt_receive_packets(struct octeon_mgmt *p, int budget) +{ + int port = p->port; + unsigned int work_done = 0; + union cvmx_mixx_ircnt mix_ircnt; + int rc; + + + mix_ircnt.u64 = cvmx_read_csr(CVMX_MIXX_IRCNT(port)); + while (work_done < budget && mix_ircnt.s.ircnt) { + + rc = octeon_mgmt_receive_one(p); + if (!rc) + work_done++; + + /* Check for more packets. */ + mix_ircnt.u64 = cvmx_read_csr(CVMX_MIXX_IRCNT(port)); + } + + octeon_mgmt_rx_fill_ring(p->netdev); + + return work_done; +} + +static int octeon_mgmt_napi_poll(struct napi_struct *napi, int budget) +{ + struct octeon_mgmt *p = container_of(napi, struct octeon_mgmt, napi); + struct net_device *netdev = p->netdev; + unsigned int work_done = 0; + + work_done = octeon_mgmt_receive_packets(p, budget); + + if (work_done < budget) { + /* We stopped because no more packets were available. */ + napi_complete(napi); + octeon_mgmt_enable_rx_irq(p); + } + octeon_mgmt_update_rx_stats(netdev); + + return work_done; +} + +/* Reset the hardware to clean state. */ +static void octeon_mgmt_reset_hw(struct octeon_mgmt *p) +{ + union cvmx_mixx_ctl mix_ctl; + union cvmx_mixx_bist mix_bist; + union cvmx_agl_gmx_bist agl_gmx_bist; + + mix_ctl.u64 = 0; + cvmx_write_csr(CVMX_MIXX_CTL(p->port), mix_ctl.u64); + do { + mix_ctl.u64 = cvmx_read_csr(CVMX_MIXX_CTL(p->port)); + } while (mix_ctl.s.busy); + mix_ctl.s.reset = 1; + cvmx_write_csr(CVMX_MIXX_CTL(p->port), mix_ctl.u64); + cvmx_read_csr(CVMX_MIXX_CTL(p->port)); + cvmx_wait(64); + + mix_bist.u64 = cvmx_read_csr(CVMX_MIXX_BIST(p->port)); + if (mix_bist.u64) + dev_warn(p->dev, "MIX failed BIST (0x%016llx)\n", + (unsigned long long)mix_bist.u64); + + agl_gmx_bist.u64 = cvmx_read_csr(CVMX_AGL_GMX_BIST); + if (agl_gmx_bist.u64) + dev_warn(p->dev, "AGL failed BIST (0x%016llx)\n", + (unsigned long long)agl_gmx_bist.u64); +} + +struct octeon_mgmt_cam_state { + u64 cam[6]; + u64 cam_mask; + int cam_index; +}; + +static void octeon_mgmt_cam_state_add(struct octeon_mgmt_cam_state *cs, + unsigned char *addr) +{ + int i; + + for (i = 0; i < 6; i++) + cs->cam[i] |= (u64)addr[i] << (8 * (cs->cam_index)); + cs->cam_mask |= (1ULL << cs->cam_index); + cs->cam_index++; +} + +static void octeon_mgmt_set_rx_filtering(struct net_device *netdev) +{ + struct octeon_mgmt *p = netdev_priv(netdev); + int port = p->port; + int i; + union cvmx_agl_gmx_rxx_adr_ctl adr_ctl; + union cvmx_agl_gmx_prtx_cfg agl_gmx_prtx; + unsigned long flags; + unsigned int prev_packet_enable; + unsigned int cam_mode = 1; /* 1 - Accept on CAM match */ + unsigned int multicast_mode = 1; /* 1 - Reject all multicast. */ + struct octeon_mgmt_cam_state cam_state; + struct dev_addr_list *list; + struct list_head *pos; + int available_cam_entries; + + memset(&cam_state, 0, sizeof(cam_state)); + + if ((netdev->flags & IFF_PROMISC) || netdev->dev_addrs.count > 7) { + cam_mode = 0; + available_cam_entries = 8; + } else { + /* + * One CAM entry for the primary address, leaves seven + * for the secondary addresses. + */ + available_cam_entries = 7 - netdev->dev_addrs.count; + } + + if (netdev->flags & IFF_MULTICAST) { + if (cam_mode == 0 || (netdev->flags & IFF_ALLMULTI) + || netdev->mc_count > available_cam_entries) + multicast_mode = 2; /* 1 - Accept all multicast. */ + else + multicast_mode = 0; /* 0 - Use CAM. */ + } + + if (cam_mode == 1) { + /* Add primary address. */ + octeon_mgmt_cam_state_add(&cam_state, netdev->dev_addr); + list_for_each(pos, &netdev->dev_addrs.list) { + struct netdev_hw_addr *hw_addr; + hw_addr = list_entry(pos, struct netdev_hw_addr, list); + octeon_mgmt_cam_state_add(&cam_state, hw_addr->addr); + list = list->next; + } + } + if (multicast_mode == 0) { + i = netdev->mc_count; + list = netdev->mc_list; + while (i--) { + octeon_mgmt_cam_state_add(&cam_state, list->da_addr); + list = list->next; + } + } + + + spin_lock_irqsave(&p->lock, flags); + + /* Disable packet I/O. */ + agl_gmx_prtx.u64 = cvmx_read_csr(CVMX_AGL_GMX_PRTX_CFG(port)); + prev_packet_enable = agl_gmx_prtx.s.en; + agl_gmx_prtx.s.en = 0; + cvmx_write_csr(CVMX_AGL_GMX_PRTX_CFG(port), agl_gmx_prtx.u64); + + + adr_ctl.u64 = 0; + adr_ctl.s.cam_mode = cam_mode; + adr_ctl.s.mcst = multicast_mode; + adr_ctl.s.bcst = 1; /* Allow broadcast */ + + cvmx_write_csr(CVMX_AGL_GMX_RXX_ADR_CTL(port), adr_ctl.u64); + + cvmx_write_csr(CVMX_AGL_GMX_RXX_ADR_CAM0(port), cam_state.cam[0]); + cvmx_write_csr(CVMX_AGL_GMX_RXX_ADR_CAM1(port), cam_state.cam[1]); + cvmx_write_csr(CVMX_AGL_GMX_RXX_ADR_CAM2(port), cam_state.cam[2]); + cvmx_write_csr(CVMX_AGL_GMX_RXX_ADR_CAM3(port), cam_state.cam[3]); + cvmx_write_csr(CVMX_AGL_GMX_RXX_ADR_CAM4(port), cam_state.cam[4]); + cvmx_write_csr(CVMX_AGL_GMX_RXX_ADR_CAM5(port), cam_state.cam[5]); + cvmx_write_csr(CVMX_AGL_GMX_RXX_ADR_CAM_EN(port), cam_state.cam_mask); + + /* Restore packet I/O. */ + agl_gmx_prtx.s.en = prev_packet_enable; + cvmx_write_csr(CVMX_AGL_GMX_PRTX_CFG(port), agl_gmx_prtx.u64); + + spin_unlock_irqrestore(&p->lock, flags); +} + +static int octeon_mgmt_set_mac_address(struct net_device *netdev, void *addr) +{ + struct sockaddr *sa = addr; + + if (!is_valid_ether_addr(sa->sa_data)) + return -EADDRNOTAVAIL; + + memcpy(netdev->dev_addr, sa->sa_data, ETH_ALEN); + + octeon_mgmt_set_rx_filtering(netdev); + + return 0; +} + +static int octeon_mgmt_change_mtu(struct net_device *netdev, int new_mtu) +{ + struct octeon_mgmt *p = netdev_priv(netdev); + int port = p->port; + int size_without_fcs = new_mtu + OCTEON_MGMT_RX_HEADROOM; + + /* + * Limit the MTU to make sure the ethernet packets are between + * 64 bytes and 16383 bytes. + */ + if (size_without_fcs < 64 || size_without_fcs > 16383) { + dev_warn(p->dev, "MTU must be between %d and %d.\n", + 64 - OCTEON_MGMT_RX_HEADROOM, + 16383 - OCTEON_MGMT_RX_HEADROOM); + return -EINVAL; + } + + netdev->mtu = new_mtu; + + cvmx_write_csr(CVMX_AGL_GMX_RXX_FRM_MAX(port), size_without_fcs); + cvmx_write_csr(CVMX_AGL_GMX_RXX_JABBER(port), + (size_without_fcs + 7) & 0xfff8); + + return 0; +} + +static irqreturn_t octeon_mgmt_interrupt(int cpl, void *dev_id) +{ + struct net_device *netdev = dev_id; + struct octeon_mgmt *p = netdev_priv(netdev); + int port = p->port; + union cvmx_mixx_isr mixx_isr; + + mixx_isr.u64 = cvmx_read_csr(CVMX_MIXX_ISR(port)); + + /* Clear any pending interrupts */ + cvmx_write_csr(CVMX_MIXX_ISR(port), + cvmx_read_csr(CVMX_MIXX_ISR(port))); + cvmx_read_csr(CVMX_MIXX_ISR(port)); + + if (mixx_isr.s.irthresh) { + octeon_mgmt_disable_rx_irq(p); + napi_schedule(&p->napi); + } + if (mixx_isr.s.orthresh) { + octeon_mgmt_disable_tx_irq(p); + tasklet_schedule(&p->tx_clean_tasklet); + } + + return IRQ_HANDLED; +} + +static int octeon_mgmt_ioctl(struct net_device *netdev, + struct ifreq *rq, int cmd) +{ + struct octeon_mgmt *p = netdev_priv(netdev); + + if (!netif_running(netdev)) + return -EINVAL; + + if (!p->phydev) + return -EINVAL; + + return phy_mii_ioctl(p->phydev, if_mii(rq), cmd); +} + +static void octeon_mgmt_adjust_link(struct net_device *netdev) +{ + struct octeon_mgmt *p = netdev_priv(netdev); + int port = p->port; + union cvmx_agl_gmx_prtx_cfg prtx_cfg; + unsigned long flags; + int link_changed = 0; + + spin_lock_irqsave(&p->lock, flags); + if (p->phydev->link) { + if (!p->last_link) + link_changed = 1; + if (p->last_duplex != p->phydev->duplex) { + p->last_duplex = p->phydev->duplex; + prtx_cfg.u64 = + cvmx_read_csr(CVMX_AGL_GMX_PRTX_CFG(port)); + prtx_cfg.s.duplex = p->phydev->duplex; + cvmx_write_csr(CVMX_AGL_GMX_PRTX_CFG(port), + prtx_cfg.u64); + } + } else { + if (p->last_link) + link_changed = -1; + } + p->last_link = p->phydev->link; + spin_unlock_irqrestore(&p->lock, flags); + + if (link_changed != 0) { + if (link_changed > 0) { + netif_carrier_on(netdev); + pr_info("%s: Link is up - %d/%s\n", netdev->name, + p->phydev->speed, + DUPLEX_FULL == p->phydev->duplex ? + "Full" : "Half"); + } else { + netif_carrier_off(netdev); + pr_info("%s: Link is down\n", netdev->name); + } + } +} + +static int octeon_mgmt_init_phy(struct net_device *netdev) +{ + struct octeon_mgmt *p = netdev_priv(netdev); + char phy_id[20]; + + if (octeon_is_simulation()) { + /* No PHYs in the simulator. */ + netif_carrier_on(netdev); + return 0; + } + + snprintf(phy_id, sizeof(phy_id), PHY_ID_FMT, "0", p->port); + + p->phydev = phy_connect(netdev, phy_id, octeon_mgmt_adjust_link, 0, + PHY_INTERFACE_MODE_MII); + + if (IS_ERR(p->phydev)) { + p->phydev = NULL; + return -1; + } + + phy_start_aneg(p->phydev); + + return 0; +} + +static int octeon_mgmt_open(struct net_device *netdev) +{ + struct octeon_mgmt *p = netdev_priv(netdev); + int port = p->port; + union cvmx_mixx_ctl mix_ctl; + union cvmx_agl_gmx_inf_mode agl_gmx_inf_mode; + union cvmx_mixx_oring1 oring1; + union cvmx_mixx_iring1 iring1; + union cvmx_agl_gmx_prtx_cfg prtx_cfg; + union cvmx_agl_gmx_rxx_frm_ctl rxx_frm_ctl; + union cvmx_mixx_irhwm mix_irhwm; + union cvmx_mixx_orhwm mix_orhwm; + union cvmx_mixx_intena mix_intena; + struct sockaddr sa; + + /* Allocate ring buffers. */ + p->tx_ring = kzalloc(ring_size_to_bytes(OCTEON_MGMT_TX_RING_SIZE), + GFP_KERNEL); + if (!p->tx_ring) + return -ENOMEM; + p->tx_ring_handle = + dma_map_single(p->dev, p->tx_ring, + ring_size_to_bytes(OCTEON_MGMT_TX_RING_SIZE), + DMA_BIDIRECTIONAL); + p->tx_next = 0; + p->tx_next_clean = 0; + p->tx_current_fill = 0; + + + p->rx_ring = kzalloc(ring_size_to_bytes(OCTEON_MGMT_RX_RING_SIZE), + GFP_KERNEL); + if (!p->rx_ring) + goto err_nomem; + p->rx_ring_handle = + dma_map_single(p->dev, p->rx_ring, + ring_size_to_bytes(OCTEON_MGMT_RX_RING_SIZE), + DMA_BIDIRECTIONAL); + + p->rx_next = 0; + p->rx_next_fill = 0; + p->rx_current_fill = 0; + + octeon_mgmt_reset_hw(p); + + mix_ctl.u64 = cvmx_read_csr(CVMX_MIXX_CTL(port)); + + /* Bring it out of reset if needed. */ + if (mix_ctl.s.reset) { + mix_ctl.s.reset = 0; + cvmx_write_csr(CVMX_MIXX_CTL(port), mix_ctl.u64); + do { + mix_ctl.u64 = cvmx_read_csr(CVMX_MIXX_CTL(port)); + } while (mix_ctl.s.reset); + } + + agl_gmx_inf_mode.u64 = 0; + agl_gmx_inf_mode.s.en = 1; + cvmx_write_csr(CVMX_AGL_GMX_INF_MODE, agl_gmx_inf_mode.u64); + + oring1.u64 = 0; + oring1.s.obase = p->tx_ring_handle >> 3; + oring1.s.osize = OCTEON_MGMT_TX_RING_SIZE; + cvmx_write_csr(CVMX_MIXX_ORING1(port), oring1.u64); + + iring1.u64 = 0; + iring1.s.ibase = p->rx_ring_handle >> 3; + iring1.s.isize = OCTEON_MGMT_RX_RING_SIZE; + cvmx_write_csr(CVMX_MIXX_IRING1(port), iring1.u64); + + /* Disable packet I/O. */ + prtx_cfg.u64 = cvmx_read_csr(CVMX_AGL_GMX_PRTX_CFG(port)); + prtx_cfg.s.en = 0; + cvmx_write_csr(CVMX_AGL_GMX_PRTX_CFG(port), prtx_cfg.u64); + + memcpy(sa.sa_data, netdev->dev_addr, ETH_ALEN); + octeon_mgmt_set_mac_address(netdev, &sa); + + octeon_mgmt_change_mtu(netdev, netdev->mtu); + + /* + * Enable the port HW. Packets are not allowed until + * cvmx_mgmt_port_enable() is called. + */ + mix_ctl.u64 = 0; + mix_ctl.s.crc_strip = 1; /* Strip the ending CRC */ + mix_ctl.s.en = 1; /* Enable the port */ + mix_ctl.s.nbtarb = 0; /* Arbitration mode */ + /* MII CB-request FIFO programmable high watermark */ + mix_ctl.s.mrq_hwm = 1; + cvmx_write_csr(CVMX_MIXX_CTL(port), mix_ctl.u64); + + if (OCTEON_IS_MODEL(OCTEON_CN56XX_PASS1_X) + || OCTEON_IS_MODEL(OCTEON_CN52XX_PASS1_X)) { + /* + * Force compensation values, as they are not + * determined properly by HW + */ + union cvmx_agl_gmx_drv_ctl drv_ctl; + + drv_ctl.u64 = cvmx_read_csr(CVMX_AGL_GMX_DRV_CTL); + if (port) { + drv_ctl.s.byp_en1 = 1; + drv_ctl.s.nctl1 = 6; + drv_ctl.s.pctl1 = 6; + } else { + drv_ctl.s.byp_en = 1; + drv_ctl.s.nctl = 6; + drv_ctl.s.pctl = 6; + } + cvmx_write_csr(CVMX_AGL_GMX_DRV_CTL, drv_ctl.u64); + } + + octeon_mgmt_rx_fill_ring(netdev); + + /* Clear statistics. */ + /* Clear on read. */ + cvmx_write_csr(CVMX_AGL_GMX_RXX_STATS_CTL(port), 1); + cvmx_write_csr(CVMX_AGL_GMX_RXX_STATS_PKTS_DRP(port), 0); + cvmx_write_csr(CVMX_AGL_GMX_RXX_STATS_PKTS_BAD(port), 0); + + cvmx_write_csr(CVMX_AGL_GMX_TXX_STATS_CTL(port), 1); + cvmx_write_csr(CVMX_AGL_GMX_TXX_STAT0(port), 0); + cvmx_write_csr(CVMX_AGL_GMX_TXX_STAT1(port), 0); + + /* Clear any pending interrupts */ + cvmx_write_csr(CVMX_MIXX_ISR(port), cvmx_read_csr(CVMX_MIXX_ISR(port))); + + if (request_irq(p->irq, octeon_mgmt_interrupt, 0, netdev->name, + netdev)) { + dev_err(p->dev, "request_irq(%d) failed.\n", p->irq); + goto err_noirq; + } + + /* Interrupt every single RX packet */ + mix_irhwm.u64 = 0; + mix_irhwm.s.irhwm = 0; + cvmx_write_csr(CVMX_MIXX_IRHWM(port), mix_irhwm.u64); + + /* Interrupt when we have 5 or more packets to clean. */ + mix_orhwm.u64 = 0; + mix_orhwm.s.orhwm = 5; + cvmx_write_csr(CVMX_MIXX_ORHWM(port), mix_orhwm.u64); + + /* Enable receive and transmit interrupts */ + mix_intena.u64 = 0; + mix_intena.s.ithena = 1; + mix_intena.s.othena = 1; + cvmx_write_csr(CVMX_MIXX_INTENA(port), mix_intena.u64); + + + /* Enable packet I/O. */ + + rxx_frm_ctl.u64 = 0; + rxx_frm_ctl.s.pre_align = 1; + /* + * When set, disables the length check for non-min sized pkts + * with padding in the client data. + */ + rxx_frm_ctl.s.pad_len = 1; + /* When set, disables the length check for VLAN pkts */ + rxx_frm_ctl.s.vlan_len = 1; + /* When set, PREAMBLE checking is less strict */ + rxx_frm_ctl.s.pre_free = 1; + /* Control Pause Frames can match station SMAC */ + rxx_frm_ctl.s.ctl_smac = 0; + /* Control Pause Frames can match globally assign Multicast address */ + rxx_frm_ctl.s.ctl_mcst = 1; + /* Forward pause information to TX block */ + rxx_frm_ctl.s.ctl_bck = 1; + /* Drop Control Pause Frames */ + rxx_frm_ctl.s.ctl_drp = 1; + /* Strip off the preamble */ + rxx_frm_ctl.s.pre_strp = 1; + /* + * This port is configured to send PREAMBLE+SFD to begin every + * frame. GMX checks that the PREAMBLE is sent correctly. + */ + rxx_frm_ctl.s.pre_chk = 1; + cvmx_write_csr(CVMX_AGL_GMX_RXX_FRM_CTL(port), rxx_frm_ctl.u64); + + /* Enable the AGL block */ + agl_gmx_inf_mode.u64 = 0; + agl_gmx_inf_mode.s.en = 1; + cvmx_write_csr(CVMX_AGL_GMX_INF_MODE, agl_gmx_inf_mode.u64); + + /* Configure the port duplex and enables */ + prtx_cfg.u64 = cvmx_read_csr(CVMX_AGL_GMX_PRTX_CFG(port)); + prtx_cfg.s.tx_en = 1; + prtx_cfg.s.rx_en = 1; + prtx_cfg.s.en = 1; + p->last_duplex = 1; + prtx_cfg.s.duplex = p->last_duplex; + cvmx_write_csr(CVMX_AGL_GMX_PRTX_CFG(port), prtx_cfg.u64); + + p->last_link = 0; + netif_carrier_off(netdev); + + if (octeon_mgmt_init_phy(netdev)) { + dev_err(p->dev, "Cannot initialize PHY.\n"); + goto err_noirq; + } + + netif_wake_queue(netdev); + napi_enable(&p->napi); + + return 0; +err_noirq: + octeon_mgmt_reset_hw(p); + dma_unmap_single(p->dev, p->rx_ring_handle, + ring_size_to_bytes(OCTEON_MGMT_RX_RING_SIZE), + DMA_BIDIRECTIONAL); + kfree(p->rx_ring); +err_nomem: + dma_unmap_single(p->dev, p->tx_ring_handle, + ring_size_to_bytes(OCTEON_MGMT_TX_RING_SIZE), + DMA_BIDIRECTIONAL); + kfree(p->tx_ring); + return -ENOMEM; +} + +static int octeon_mgmt_stop(struct net_device *netdev) +{ + struct octeon_mgmt *p = netdev_priv(netdev); + + napi_disable(&p->napi); + netif_stop_queue(netdev); + + if (p->phydev) + phy_disconnect(p->phydev); + + netif_carrier_off(netdev); + + octeon_mgmt_reset_hw(p); + + + free_irq(p->irq, netdev); + + /* dma_unmap is a nop on Octeon, so just free everything. */ + skb_queue_purge(&p->tx_list); + skb_queue_purge(&p->rx_list); + + dma_unmap_single(p->dev, p->rx_ring_handle, + ring_size_to_bytes(OCTEON_MGMT_RX_RING_SIZE), + DMA_BIDIRECTIONAL); + kfree(p->rx_ring); + + dma_unmap_single(p->dev, p->tx_ring_handle, + ring_size_to_bytes(OCTEON_MGMT_TX_RING_SIZE), + DMA_BIDIRECTIONAL); + kfree(p->tx_ring); + + + return 0; +} + +static int octeon_mgmt_xmit(struct sk_buff *skb, struct net_device *netdev) +{ + struct octeon_mgmt *p = netdev_priv(netdev); + int port = p->port; + union mgmt_port_ring_entry re; + unsigned long flags; + + re.d64 = 0; + re.s.len = skb->len; + re.s.addr = dma_map_single(p->dev, skb->data, + skb->len, + DMA_TO_DEVICE); + + spin_lock_irqsave(&p->tx_list.lock, flags); + + if (unlikely(p->tx_current_fill >= + ring_max_fill(OCTEON_MGMT_TX_RING_SIZE))) { + spin_unlock_irqrestore(&p->tx_list.lock, flags); + + dma_unmap_single(p->dev, re.s.addr, re.s.len, + DMA_TO_DEVICE); + + netif_stop_queue(netdev); + return NETDEV_TX_BUSY; + } + + __skb_queue_tail(&p->tx_list, skb); + + /* Put it in the ring. */ + p->tx_ring[p->tx_next] = re.d64; + p->tx_next = (p->tx_next + 1) % OCTEON_MGMT_TX_RING_SIZE; + p->tx_current_fill++; + + spin_unlock_irqrestore(&p->tx_list.lock, flags); + + dma_sync_single_for_device(p->dev, p->tx_ring_handle, + ring_size_to_bytes(OCTEON_MGMT_TX_RING_SIZE), + DMA_BIDIRECTIONAL); + + netdev->stats.tx_packets++; + netdev->stats.tx_bytes += skb->len; + + /* Ring the bell. */ + cvmx_write_csr(CVMX_MIXX_ORING2(port), 1); + + netdev->trans_start = jiffies; + octeon_mgmt_clean_tx_buffers(p); + octeon_mgmt_update_tx_stats(netdev); + return NETDEV_TX_OK; +} + +#ifdef CONFIG_NET_POLL_CONTROLLER +static void octeon_mgmt_poll_controller(struct net_device *netdev) +{ + struct octeon_mgmt *p = netdev_priv(netdev); + + octeon_mgmt_receive_packets(p, 16); + octeon_mgmt_update_rx_stats(netdev); + return; +} +#endif + +static void octeon_mgmt_get_drvinfo(struct net_device *netdev, + struct ethtool_drvinfo *info) +{ + strncpy(info->driver, DRV_NAME, sizeof(info->driver)); + strncpy(info->version, DRV_VERSION, sizeof(info->version)); + strncpy(info->fw_version, "N/A", sizeof(info->fw_version)); + strncpy(info->bus_info, "N/A", sizeof(info->bus_info)); + info->n_stats = 0; + info->testinfo_len = 0; + info->regdump_len = 0; + info->eedump_len = 0; +} + +static int octeon_mgmt_get_settings(struct net_device *netdev, + struct ethtool_cmd *cmd) +{ + struct octeon_mgmt *p = netdev_priv(netdev); + + if (p->phydev) + return phy_ethtool_gset(p->phydev, cmd); + + return -EINVAL; +} + +static int octeon_mgmt_set_settings(struct net_device *netdev, + struct ethtool_cmd *cmd) +{ + struct octeon_mgmt *p = netdev_priv(netdev); + + if (!capable(CAP_NET_ADMIN)) + return -EPERM; + + if (p->phydev) + return phy_ethtool_sset(p->phydev, cmd); + + return -EINVAL; +} + +static const struct ethtool_ops octeon_mgmt_ethtool_ops = { + .get_drvinfo = octeon_mgmt_get_drvinfo, + .get_link = ethtool_op_get_link, + .get_settings = octeon_mgmt_get_settings, + .set_settings = octeon_mgmt_set_settings +}; + +static const struct net_device_ops octeon_mgmt_ops = { + .ndo_open = octeon_mgmt_open, + .ndo_stop = octeon_mgmt_stop, + .ndo_start_xmit = octeon_mgmt_xmit, + .ndo_set_rx_mode = octeon_mgmt_set_rx_filtering, + .ndo_set_multicast_list = octeon_mgmt_set_rx_filtering, + .ndo_set_mac_address = octeon_mgmt_set_mac_address, + .ndo_do_ioctl = octeon_mgmt_ioctl, + .ndo_change_mtu = octeon_mgmt_change_mtu, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = octeon_mgmt_poll_controller, +#endif +}; + +static int __init octeon_mgmt_probe(struct platform_device *pdev) +{ + struct resource *res_irq; + struct net_device *netdev; + struct octeon_mgmt *p; + int i; + + netdev = alloc_etherdev(sizeof(struct octeon_mgmt)); + if (netdev == NULL) + return -ENOMEM; + + dev_set_drvdata(&pdev->dev, netdev); + p = netdev_priv(netdev); + netif_napi_add(netdev, &p->napi, octeon_mgmt_napi_poll, + OCTEON_MGMT_NAPI_WEIGHT); + + p->netdev = netdev; + p->dev = &pdev->dev; + + p->port = pdev->id; + snprintf(netdev->name, IFNAMSIZ, "mgmt%d", p->port); + + res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (!res_irq) + goto err; + + p->irq = res_irq->start; + spin_lock_init(&p->lock); + + skb_queue_head_init(&p->tx_list); + skb_queue_head_init(&p->rx_list); + tasklet_init(&p->tx_clean_tasklet, + octeon_mgmt_clean_tx_tasklet, (unsigned long)p); + + netdev->netdev_ops = &octeon_mgmt_ops; + netdev->ethtool_ops = &octeon_mgmt_ethtool_ops; + + + /* The mgmt ports get the first N MACs. */ + for (i = 0; i < 6; i++) + netdev->dev_addr[i] = octeon_bootinfo->mac_addr_base[i]; + netdev->dev_addr[5] += p->port; + + if (p->port >= octeon_bootinfo->mac_addr_count) + dev_err(&pdev->dev, + "Error %s: Using MAC outside of the assigned range: " + "%02x:%02x:%02x:%02x:%02x:%02x\n", netdev->name, + netdev->dev_addr[0], netdev->dev_addr[1], + netdev->dev_addr[2], netdev->dev_addr[3], + netdev->dev_addr[4], netdev->dev_addr[5]); + + if (register_netdev(netdev)) + goto err; + + dev_info(&pdev->dev, "Version " DRV_VERSION "\n"); + return 0; +err: + free_netdev(netdev); + return -ENOENT; +} + +static int __exit octeon_mgmt_remove(struct platform_device *pdev) +{ + struct net_device *netdev = dev_get_drvdata(&pdev->dev); + + unregister_netdev(netdev); + free_netdev(netdev); + return 0; +} + +static struct platform_driver octeon_mgmt_driver = { + .driver = { + .name = "octeon_mgmt", + .owner = THIS_MODULE, + }, + .probe = octeon_mgmt_probe, + .remove = __exit_p(octeon_mgmt_remove), +}; + +extern void octeon_mdiobus_force_mod_depencency(void); + +static int __init octeon_mgmt_mod_init(void) +{ + /* Force our mdiobus driver module to be loaded first. */ + octeon_mdiobus_force_mod_depencency(); + return platform_driver_register(&octeon_mgmt_driver); +} + +static void __exit octeon_mgmt_mod_exit(void) +{ + platform_driver_unregister(&octeon_mgmt_driver); +} + +module_init(octeon_mgmt_mod_init); +module_exit(octeon_mgmt_mod_exit); + +MODULE_DESCRIPTION(DRV_DESCRIPTION); +MODULE_AUTHOR("David Daney"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_VERSION); diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index d5d8e1c5bc91..fc5938ba3d78 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -115,4 +115,15 @@ config MDIO_GPIO To compile this driver as a module, choose M here: the module will be called mdio-gpio. +config MDIO_OCTEON + tristate "Support for MDIO buses on Octeon SOCs" + depends on CPU_CAVIUM_OCTEON + default y + help + + This module provides a driver for the Octeon MDIO busses. + It is required by the Octeon Ethernet device drivers. + + If in doubt, say Y. + endif # PHYLIB diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile index edfaac48cbd5..1342585af381 100644 --- a/drivers/net/phy/Makefile +++ b/drivers/net/phy/Makefile @@ -20,3 +20,4 @@ obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o obj-$(CONFIG_MDIO_GPIO) += mdio-gpio.o obj-$(CONFIG_NATIONAL_PHY) += national.o obj-$(CONFIG_STE10XP) += ste10Xp.o +obj-$(CONFIG_MDIO_OCTEON) += mdio-octeon.o diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c index f63c96a4ecb4..c13cf64095b6 100644 --- a/drivers/net/phy/broadcom.c +++ b/drivers/net/phy/broadcom.c @@ -326,7 +326,8 @@ error: static void bcm54xx_adjust_rxrefclk(struct phy_device *phydev) { - u32 val, orig; + u32 orig; + int val; bool clk125en = true; /* Abort if we are using an untested phy. */ diff --git a/drivers/net/phy/mdio-octeon.c b/drivers/net/phy/mdio-octeon.c new file mode 100644 index 000000000000..61a4461cbda5 --- /dev/null +++ b/drivers/net/phy/mdio-octeon.c @@ -0,0 +1,180 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2009 Cavium Networks + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/phy.h> + +#include <asm/octeon/octeon.h> +#include <asm/octeon/cvmx-smix-defs.h> + +#define DRV_VERSION "1.0" +#define DRV_DESCRIPTION "Cavium Networks Octeon SMI/MDIO driver" + +struct octeon_mdiobus { + struct mii_bus *mii_bus; + int unit; + int phy_irq[PHY_MAX_ADDR]; +}; + +static int octeon_mdiobus_read(struct mii_bus *bus, int phy_id, int regnum) +{ + struct octeon_mdiobus *p = bus->priv; + union cvmx_smix_cmd smi_cmd; + union cvmx_smix_rd_dat smi_rd; + int timeout = 1000; + + smi_cmd.u64 = 0; + smi_cmd.s.phy_op = 1; /* MDIO_CLAUSE_22_READ */ + smi_cmd.s.phy_adr = phy_id; + smi_cmd.s.reg_adr = regnum; + cvmx_write_csr(CVMX_SMIX_CMD(p->unit), smi_cmd.u64); + + do { + /* + * Wait 1000 clocks so we don't saturate the RSL bus + * doing reads. + */ + cvmx_wait(1000); + smi_rd.u64 = cvmx_read_csr(CVMX_SMIX_RD_DAT(p->unit)); + } while (smi_rd.s.pending && --timeout); + + if (smi_rd.s.val) + return smi_rd.s.dat; + else + return -EIO; +} + +static int octeon_mdiobus_write(struct mii_bus *bus, int phy_id, + int regnum, u16 val) +{ + struct octeon_mdiobus *p = bus->priv; + union cvmx_smix_cmd smi_cmd; + union cvmx_smix_wr_dat smi_wr; + int timeout = 1000; + + smi_wr.u64 = 0; + smi_wr.s.dat = val; + cvmx_write_csr(CVMX_SMIX_WR_DAT(p->unit), smi_wr.u64); + + smi_cmd.u64 = 0; + smi_cmd.s.phy_op = 0; /* MDIO_CLAUSE_22_WRITE */ + smi_cmd.s.phy_adr = phy_id; + smi_cmd.s.reg_adr = regnum; + cvmx_write_csr(CVMX_SMIX_CMD(p->unit), smi_cmd.u64); + + do { + /* + * Wait 1000 clocks so we don't saturate the RSL bus + * doing reads. + */ + cvmx_wait(1000); + smi_wr.u64 = cvmx_read_csr(CVMX_SMIX_WR_DAT(p->unit)); + } while (smi_wr.s.pending && --timeout); + + if (timeout <= 0) + return -EIO; + + return 0; +} + +static int __init octeon_mdiobus_probe(struct platform_device *pdev) +{ + struct octeon_mdiobus *bus; + int i; + int err = -ENOENT; + + bus = devm_kzalloc(&pdev->dev, sizeof(*bus), GFP_KERNEL); + if (!bus) + return -ENOMEM; + + /* The platform_device id is our unit number. */ + bus->unit = pdev->id; + + bus->mii_bus = mdiobus_alloc(); + + if (!bus->mii_bus) + goto err; + + /* + * Standard Octeon evaluation boards don't support phy + * interrupts, we need to poll. + */ + for (i = 0; i < PHY_MAX_ADDR; i++) + bus->phy_irq[i] = PHY_POLL; + + bus->mii_bus->priv = bus; + bus->mii_bus->irq = bus->phy_irq; + bus->mii_bus->name = "mdio-octeon"; + snprintf(bus->mii_bus->id, MII_BUS_ID_SIZE, "%x", bus->unit); + bus->mii_bus->parent = &pdev->dev; + + bus->mii_bus->read = octeon_mdiobus_read; + bus->mii_bus->write = octeon_mdiobus_write; + + dev_set_drvdata(&pdev->dev, bus); + + err = mdiobus_register(bus->mii_bus); + if (err) + goto err_register; + + dev_info(&pdev->dev, "Version " DRV_VERSION "\n"); + + return 0; +err_register: + mdiobus_free(bus->mii_bus); + +err: + devm_kfree(&pdev->dev, bus); + return err; +} + +static int __exit octeon_mdiobus_remove(struct platform_device *pdev) +{ + struct octeon_mdiobus *bus; + + bus = dev_get_drvdata(&pdev->dev); + + mdiobus_unregister(bus->mii_bus); + mdiobus_free(bus->mii_bus); + return 0; +} + +static struct platform_driver octeon_mdiobus_driver = { + .driver = { + .name = "mdio-octeon", + .owner = THIS_MODULE, + }, + .probe = octeon_mdiobus_probe, + .remove = __exit_p(octeon_mdiobus_remove), +}; + +void octeon_mdiobus_force_mod_depencency(void) +{ + /* Let ethernet drivers force us to be loaded. */ +} +EXPORT_SYMBOL(octeon_mdiobus_force_mod_depencency); + +static int __init octeon_mdiobus_mod_init(void) +{ + return platform_driver_register(&octeon_mdiobus_driver); +} + +static void __exit octeon_mdiobus_mod_exit(void) +{ + platform_driver_unregister(&octeon_mdiobus_driver); +} + +module_init(octeon_mdiobus_mod_init); +module_exit(octeon_mdiobus_mod_exit); + +MODULE_DESCRIPTION(DRV_DESCRIPTION); +MODULE_VERSION(DRV_VERSION); +MODULE_AUTHOR("David Daney"); +MODULE_LICENSE("GPL"); diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h index 675b7df632fc..27ca859e7453 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.h +++ b/drivers/net/wireless/iwlwifi/iwl-core.h @@ -63,7 +63,7 @@ #ifndef __iwl_core_h__ #define __iwl_core_h__ -#include <linux/utsrelease.h> +#include <generated/utsrelease.h> /************************ * forward declarations * diff --git a/drivers/net/wireless/libertas/cmd.c b/drivers/net/wireless/libertas/cmd.c index b9b371bfa30f..42611bea76a3 100644 --- a/drivers/net/wireless/libertas/cmd.c +++ b/drivers/net/wireless/libertas/cmd.c @@ -1365,7 +1365,7 @@ static void lbs_send_confirmsleep(struct lbs_private *priv) priv->dnld_sent = DNLD_RES_RECEIVED; /* If nothing to do, go back to sleep (?) */ - if (!__kfifo_len(priv->event_fifo) && !priv->resp_len[priv->resp_idx]) + if (!kfifo_len(&priv->event_fifo) && !priv->resp_len[priv->resp_idx]) priv->psstate = PS_STATE_SLEEP; spin_unlock_irqrestore(&priv->driver_lock, flags); @@ -1439,7 +1439,7 @@ void lbs_ps_confirm_sleep(struct lbs_private *priv) } /* Pending events or command responses? */ - if (__kfifo_len(priv->event_fifo) || priv->resp_len[priv->resp_idx]) { + if (kfifo_len(&priv->event_fifo) || priv->resp_len[priv->resp_idx]) { allowed = 0; lbs_deb_host("pending events or command responses\n"); } diff --git a/drivers/net/wireless/libertas/dev.h b/drivers/net/wireless/libertas/dev.h index 6a8d2b291d8c..05bb298dfae9 100644 --- a/drivers/net/wireless/libertas/dev.h +++ b/drivers/net/wireless/libertas/dev.h @@ -10,7 +10,7 @@ #include "scan.h" #include "assoc.h" - +#include <linux/kfifo.h> /** sleep_params */ struct sleep_params { @@ -120,7 +120,7 @@ struct lbs_private { u32 resp_len[2]; /* Events sent from hardware to driver */ - struct kfifo *event_fifo; + struct kfifo event_fifo; /** thread to service interrupts */ struct task_struct *main_thread; diff --git a/drivers/net/wireless/libertas/main.c b/drivers/net/wireless/libertas/main.c index db38a5a719fa..c2975c8e2f21 100644 --- a/drivers/net/wireless/libertas/main.c +++ b/drivers/net/wireless/libertas/main.c @@ -459,7 +459,7 @@ static int lbs_thread(void *data) else if (!list_empty(&priv->cmdpendingq) && !(priv->wakeup_dev_required)) shouldsleep = 0; /* We have a command to send */ - else if (__kfifo_len(priv->event_fifo)) + else if (kfifo_len(&priv->event_fifo)) shouldsleep = 0; /* We have an event to process */ else shouldsleep = 1; /* No command */ @@ -511,10 +511,13 @@ static int lbs_thread(void *data) /* Process hardware events, e.g. card removed, link lost */ spin_lock_irq(&priv->driver_lock); - while (__kfifo_len(priv->event_fifo)) { + while (kfifo_len(&priv->event_fifo)) { u32 event; - __kfifo_get(priv->event_fifo, (unsigned char *) &event, - sizeof(event)); + + if (kfifo_out(&priv->event_fifo, + (unsigned char *) &event, sizeof(event)) != + sizeof(event)) + break; spin_unlock_irq(&priv->driver_lock); lbs_process_event(priv, event); spin_lock_irq(&priv->driver_lock); @@ -883,10 +886,9 @@ static int lbs_init_adapter(struct lbs_private *priv) priv->resp_len[0] = priv->resp_len[1] = 0; /* Create the event FIFO */ - priv->event_fifo = kfifo_alloc(sizeof(u32) * 16, GFP_KERNEL, NULL); - if (IS_ERR(priv->event_fifo)) { + ret = kfifo_alloc(&priv->event_fifo, sizeof(u32) * 16, GFP_KERNEL); + if (ret) { lbs_pr_err("Out of memory allocating event FIFO buffer\n"); - ret = -ENOMEM; goto out; } @@ -901,8 +903,7 @@ static void lbs_free_adapter(struct lbs_private *priv) lbs_deb_enter(LBS_DEB_MAIN); lbs_free_cmd_buffer(priv); - if (priv->event_fifo) - kfifo_free(priv->event_fifo); + kfifo_free(&priv->event_fifo); del_timer(&priv->command_timer); del_timer(&priv->auto_deepsleep_timer); kfree(priv->networks); @@ -1177,7 +1178,7 @@ void lbs_queue_event(struct lbs_private *priv, u32 event) if (priv->psstate == PS_STATE_SLEEP) priv->psstate = PS_STATE_AWAKE; - __kfifo_put(priv->event_fifo, (unsigned char *) &event, sizeof(u32)); + kfifo_in(&priv->event_fifo, (unsigned char *) &event, sizeof(u32)); wake_up_interruptible(&priv->waitq); diff --git a/drivers/pcmcia/pxa2xx_base.c b/drivers/pcmcia/pxa2xx_base.c index 3aabf1e37988..76e640bccde8 100644 --- a/drivers/pcmcia/pxa2xx_base.c +++ b/drivers/pcmcia/pxa2xx_base.c @@ -291,7 +291,7 @@ static int pxa2xx_drv_pcmcia_probe(struct platform_device *dev) skt->nr = ops->first + i; skt->ops = ops; skt->socket.owner = ops->owner; - skt->socket.dev.parent = dev; + skt->socket.dev.parent = &dev->dev; skt->socket.pci_irq = NO_IRQ; ret = pxa2xx_drv_pcmcia_add_one(skt); @@ -304,8 +304,8 @@ static int pxa2xx_drv_pcmcia_probe(struct platform_device *dev) soc_pcmcia_remove_one(&sinfo->skt[i]); kfree(sinfo); } else { - pxa2xx_configure_sockets(dev); - dev_set_drvdata(dev, sinfo); + pxa2xx_configure_sockets(&dev->dev); + dev_set_drvdata(&dev->dev, sinfo); } return ret; diff --git a/drivers/platform/x86/compal-laptop.c b/drivers/platform/x86/compal-laptop.c index 11003bba10d3..1a387e79f719 100644 --- a/drivers/platform/x86/compal-laptop.c +++ b/drivers/platform/x86/compal-laptop.c @@ -51,7 +51,6 @@ #include <linux/dmi.h> #include <linux/backlight.h> #include <linux/platform_device.h> -#include <linux/autoconf.h> #define COMPAL_DRIVER_VERSION "0.2.6" diff --git a/drivers/platform/x86/fujitsu-laptop.c b/drivers/platform/x86/fujitsu-laptop.c index bcd4ba8be7db..b66029bd75d0 100644 --- a/drivers/platform/x86/fujitsu-laptop.c +++ b/drivers/platform/x86/fujitsu-laptop.c @@ -164,7 +164,7 @@ struct fujitsu_hotkey_t { struct input_dev *input; char phys[32]; struct platform_device *pf_device; - struct kfifo *fifo; + struct kfifo fifo; spinlock_t fifo_lock; int rfkill_supported; int rfkill_state; @@ -824,12 +824,10 @@ static int acpi_fujitsu_hotkey_add(struct acpi_device *device) /* kfifo */ spin_lock_init(&fujitsu_hotkey->fifo_lock); - fujitsu_hotkey->fifo = - kfifo_alloc(RINGBUFFERSIZE * sizeof(int), GFP_KERNEL, - &fujitsu_hotkey->fifo_lock); - if (IS_ERR(fujitsu_hotkey->fifo)) { + error = kfifo_alloc(&fujitsu_hotkey->fifo, RINGBUFFERSIZE * sizeof(int), + GFP_KERNEL); + if (error) { printk(KERN_ERR "kfifo_alloc failed\n"); - error = PTR_ERR(fujitsu_hotkey->fifo); goto err_stop; } @@ -934,7 +932,7 @@ err_unregister_input_dev: err_free_input_dev: input_free_device(input); err_free_fifo: - kfifo_free(fujitsu_hotkey->fifo); + kfifo_free(&fujitsu_hotkey->fifo); err_stop: return result; } @@ -956,7 +954,7 @@ static int acpi_fujitsu_hotkey_remove(struct acpi_device *device, int type) input_free_device(input); - kfifo_free(fujitsu_hotkey->fifo); + kfifo_free(&fujitsu_hotkey->fifo); fujitsu_hotkey->acpi_handle = NULL; @@ -1008,9 +1006,10 @@ static void acpi_fujitsu_hotkey_notify(struct acpi_device *device, u32 event) vdbg_printk(FUJLAPTOP_DBG_TRACE, "Push keycode into ringbuffer [%d]\n", keycode); - status = kfifo_put(fujitsu_hotkey->fifo, + status = kfifo_in_locked(&fujitsu_hotkey->fifo, (unsigned char *)&keycode, - sizeof(keycode)); + sizeof(keycode), + &fujitsu_hotkey->fifo_lock); if (status != sizeof(keycode)) { vdbg_printk(FUJLAPTOP_DBG_WARN, "Could not push keycode [0x%x]\n", @@ -1021,11 +1020,12 @@ static void acpi_fujitsu_hotkey_notify(struct acpi_device *device, u32 event) } } else if (keycode == 0) { while ((status = - kfifo_get - (fujitsu_hotkey->fifo, (unsigned char *) - &keycode_r, - sizeof - (keycode_r))) == sizeof(keycode_r)) { + kfifo_out_locked( + &fujitsu_hotkey->fifo, + (unsigned char *) &keycode_r, + sizeof(keycode_r), + &fujitsu_hotkey->fifo_lock)) + == sizeof(keycode_r)) { input_report_key(input, keycode_r, 0); input_sync(input); vdbg_printk(FUJLAPTOP_DBG_TRACE, diff --git a/drivers/platform/x86/sony-laptop.c b/drivers/platform/x86/sony-laptop.c index 7a2cc8a5c975..2896ca4cd9ab 100644 --- a/drivers/platform/x86/sony-laptop.c +++ b/drivers/platform/x86/sony-laptop.c @@ -142,7 +142,7 @@ struct sony_laptop_input_s { atomic_t users; struct input_dev *jog_dev; struct input_dev *key_dev; - struct kfifo *fifo; + struct kfifo fifo; spinlock_t fifo_lock; struct workqueue_struct *wq; }; @@ -300,8 +300,9 @@ static void do_sony_laptop_release_key(struct work_struct *work) { struct sony_laptop_keypress kp; - while (kfifo_get(sony_laptop_input.fifo, (unsigned char *)&kp, - sizeof(kp)) == sizeof(kp)) { + while (kfifo_out_locked(&sony_laptop_input.fifo, (unsigned char *)&kp, + sizeof(kp), &sony_laptop_input.fifo_lock) + == sizeof(kp)) { msleep(10); input_report_key(kp.dev, kp.key, 0); input_sync(kp.dev); @@ -362,8 +363,9 @@ static void sony_laptop_report_input_event(u8 event) /* we emit the scancode so we can always remap the key */ input_event(kp.dev, EV_MSC, MSC_SCAN, event); input_sync(kp.dev); - kfifo_put(sony_laptop_input.fifo, - (unsigned char *)&kp, sizeof(kp)); + kfifo_in_locked(&sony_laptop_input.fifo, + (unsigned char *)&kp, sizeof(kp), + &sony_laptop_input.fifo_lock); if (!work_pending(&sony_laptop_release_key_work)) queue_work(sony_laptop_input.wq, @@ -385,12 +387,10 @@ static int sony_laptop_setup_input(struct acpi_device *acpi_device) /* kfifo */ spin_lock_init(&sony_laptop_input.fifo_lock); - sony_laptop_input.fifo = - kfifo_alloc(SONY_LAPTOP_BUF_SIZE, GFP_KERNEL, - &sony_laptop_input.fifo_lock); - if (IS_ERR(sony_laptop_input.fifo)) { + error = + kfifo_alloc(&sony_laptop_input.fifo, SONY_LAPTOP_BUF_SIZE, GFP_KERNEL); + if (error) { printk(KERN_ERR DRV_PFX "kfifo_alloc failed\n"); - error = PTR_ERR(sony_laptop_input.fifo); goto err_dec_users; } @@ -474,7 +474,7 @@ err_destroy_wq: destroy_workqueue(sony_laptop_input.wq); err_free_kfifo: - kfifo_free(sony_laptop_input.fifo); + kfifo_free(&sony_laptop_input.fifo); err_dec_users: atomic_dec(&sony_laptop_input.users); @@ -500,7 +500,7 @@ static void sony_laptop_remove_input(void) } destroy_workqueue(sony_laptop_input.wq); - kfifo_free(sony_laptop_input.fifo); + kfifo_free(&sony_laptop_input.fifo); } /*********** Platform Device ***********/ @@ -2079,7 +2079,7 @@ static struct attribute_group spic_attribute_group = { struct sonypi_compat_s { struct fasync_struct *fifo_async; - struct kfifo *fifo; + struct kfifo fifo; spinlock_t fifo_lock; wait_queue_head_t fifo_proc_list; atomic_t open_count; @@ -2104,12 +2104,12 @@ static int sonypi_misc_open(struct inode *inode, struct file *file) /* Flush input queue on first open */ unsigned long flags; - spin_lock_irqsave(sonypi_compat.fifo->lock, flags); + spin_lock_irqsave(&sonypi_compat.fifo_lock, flags); if (atomic_inc_return(&sonypi_compat.open_count) == 1) - __kfifo_reset(sonypi_compat.fifo); + kfifo_reset(&sonypi_compat.fifo); - spin_unlock_irqrestore(sonypi_compat.fifo->lock, flags); + spin_unlock_irqrestore(&sonypi_compat.fifo_lock, flags); return 0; } @@ -2120,17 +2120,18 @@ static ssize_t sonypi_misc_read(struct file *file, char __user *buf, ssize_t ret; unsigned char c; - if ((kfifo_len(sonypi_compat.fifo) == 0) && + if ((kfifo_len(&sonypi_compat.fifo) == 0) && (file->f_flags & O_NONBLOCK)) return -EAGAIN; ret = wait_event_interruptible(sonypi_compat.fifo_proc_list, - kfifo_len(sonypi_compat.fifo) != 0); + kfifo_len(&sonypi_compat.fifo) != 0); if (ret) return ret; while (ret < count && - (kfifo_get(sonypi_compat.fifo, &c, sizeof(c)) == sizeof(c))) { + (kfifo_out_locked(&sonypi_compat.fifo, &c, sizeof(c), + &sonypi_compat.fifo_lock) == sizeof(c))) { if (put_user(c, buf++)) return -EFAULT; ret++; @@ -2147,7 +2148,7 @@ static ssize_t sonypi_misc_read(struct file *file, char __user *buf, static unsigned int sonypi_misc_poll(struct file *file, poll_table *wait) { poll_wait(file, &sonypi_compat.fifo_proc_list, wait); - if (kfifo_len(sonypi_compat.fifo)) + if (kfifo_len(&sonypi_compat.fifo)) return POLLIN | POLLRDNORM; return 0; } @@ -2309,7 +2310,8 @@ static struct miscdevice sonypi_misc_device = { static void sonypi_compat_report_event(u8 event) { - kfifo_put(sonypi_compat.fifo, (unsigned char *)&event, sizeof(event)); + kfifo_in_locked(&sonypi_compat.fifo, (unsigned char *)&event, + sizeof(event), &sonypi_compat.fifo_lock); kill_fasync(&sonypi_compat.fifo_async, SIGIO, POLL_IN); wake_up_interruptible(&sonypi_compat.fifo_proc_list); } @@ -2319,11 +2321,11 @@ static int sonypi_compat_init(void) int error; spin_lock_init(&sonypi_compat.fifo_lock); - sonypi_compat.fifo = kfifo_alloc(SONY_LAPTOP_BUF_SIZE, GFP_KERNEL, - &sonypi_compat.fifo_lock); - if (IS_ERR(sonypi_compat.fifo)) { + error = + kfifo_alloc(&sonypi_compat.fifo, SONY_LAPTOP_BUF_SIZE, GFP_KERNEL); + if (error) { printk(KERN_ERR DRV_PFX "kfifo_alloc failed\n"); - return PTR_ERR(sonypi_compat.fifo); + return error; } init_waitqueue_head(&sonypi_compat.fifo_proc_list); @@ -2342,14 +2344,14 @@ static int sonypi_compat_init(void) return 0; err_free_kfifo: - kfifo_free(sonypi_compat.fifo); + kfifo_free(&sonypi_compat.fifo); return error; } static void sonypi_compat_exit(void) { misc_deregister(&sonypi_misc_device); - kfifo_free(sonypi_compat.fifo); + kfifo_free(&sonypi_compat.fifo); } #else static int sonypi_compat_init(void) { return 0; } diff --git a/drivers/regulator/88pm8607.c b/drivers/regulator/88pm8607.c new file mode 100644 index 000000000000..04719551381b --- /dev/null +++ b/drivers/regulator/88pm8607.c @@ -0,0 +1,685 @@ +/* + * Regulators driver for Marvell 88PM8607 + * + * Copyright (C) 2009 Marvell International Ltd. + * Haojian Zhuang <haojian.zhuang@marvell.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/err.h> +#include <linux/platform_device.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/machine.h> +#include <linux/mfd/88pm8607.h> + +struct pm8607_regulator_info { + struct regulator_desc desc; + struct pm8607_chip *chip; + struct regulator_dev *regulator; + + int min_uV; + int max_uV; + int step_uV; + int vol_reg; + int vol_shift; + int vol_nbits; + int update_reg; + int update_bit; + int enable_reg; + int enable_bit; + int slope_double; +}; + +static inline int check_range(struct pm8607_regulator_info *info, + int min_uV, int max_uV) +{ + if (max_uV < info->min_uV || min_uV > info->max_uV || min_uV > max_uV) + return -EINVAL; + + return 0; +} + +static int pm8607_list_voltage(struct regulator_dev *rdev, unsigned index) +{ + struct pm8607_regulator_info *info = rdev_get_drvdata(rdev); + uint8_t chip_id = info->chip->chip_id; + int ret = -EINVAL; + + switch (info->desc.id) { + case PM8607_ID_BUCK1: + ret = (index < 0x1d) ? (index * 25000 + 800000) : + ((index < 0x20) ? 1500000 : + ((index < 0x40) ? ((index - 0x20) * 25000) : + -EINVAL)); + break; + case PM8607_ID_BUCK3: + ret = (index < 0x3d) ? (index * 25000) : + ((index < 0x40) ? 1500000 : -EINVAL); + if (ret < 0) + break; + if (info->slope_double) + ret <<= 1; + break; + case PM8607_ID_LDO1: + ret = (index == 0) ? 1800000 : + ((index == 1) ? 1200000 : + ((index == 2) ? 2800000 : -EINVAL)); + break; + case PM8607_ID_LDO5: + ret = (index == 0) ? 2900000 : + ((index == 1) ? 3000000 : + ((index == 2) ? 3100000 : 3300000)); + break; + case PM8607_ID_LDO7: + case PM8607_ID_LDO8: + ret = (index < 3) ? (index * 50000 + 1800000) : + ((index < 8) ? (index * 50000 + 2550000) : + -EINVAL); + break; + case PM8607_ID_LDO12: + ret = (index < 2) ? (index * 100000 + 1800000) : + ((index < 7) ? (index * 100000 + 2500000) : + ((index == 7) ? 3300000 : 1200000)); + break; + case PM8607_ID_LDO2: + case PM8607_ID_LDO3: + case PM8607_ID_LDO9: + switch (chip_id) { + case PM8607_CHIP_A0: + case PM8607_CHIP_A1: + ret = (index < 3) ? (index * 50000 + 1800000) : + ((index < 8) ? (index * 50000 + 2550000) : + -EINVAL); + break; + case PM8607_CHIP_B0: + ret = (index < 3) ? (index * 50000 + 1800000) : + ((index < 7) ? (index * 50000 + 2550000) : + 3300000); + break; + } + break; + case PM8607_ID_LDO4: + switch (chip_id) { + case PM8607_CHIP_A0: + case PM8607_CHIP_A1: + ret = (index < 3) ? (index * 50000 + 1800000) : + ((index < 8) ? (index * 50000 + 2550000) : + -EINVAL); + break; + case PM8607_CHIP_B0: + ret = (index < 3) ? (index * 50000 + 1800000) : + ((index < 6) ? (index * 50000 + 2550000) : + ((index == 6) ? 2900000 : 3300000)); + break; + } + break; + case PM8607_ID_LDO6: + switch (chip_id) { + case PM8607_CHIP_A0: + case PM8607_CHIP_A1: + ret = (index < 3) ? (index * 50000 + 1800000) : + ((index < 8) ? (index * 50000 + 2450000) : + -EINVAL); + break; + case PM8607_CHIP_B0: + ret = (index < 2) ? (index * 50000 + 1800000) : + ((index < 7) ? (index * 50000 + 2500000) : + 3300000); + break; + } + break; + case PM8607_ID_LDO10: + switch (chip_id) { + case PM8607_CHIP_A0: + case PM8607_CHIP_A1: + ret = (index < 3) ? (index * 50000 + 1800000) : + ((index < 8) ? (index * 50000 + 2550000) : + 1200000); + break; + case PM8607_CHIP_B0: + ret = (index < 3) ? (index * 50000 + 1800000) : + ((index < 7) ? (index * 50000 + 2550000) : + ((index == 7) ? 3300000 : 1200000)); + break; + } + break; + case PM8607_ID_LDO14: + switch (chip_id) { + case PM8607_CHIP_A0: + case PM8607_CHIP_A1: + ret = (index < 3) ? (index * 50000 + 1800000) : + ((index < 8) ? (index * 50000 + 2550000) : + -EINVAL); + break; + case PM8607_CHIP_B0: + ret = (index < 2) ? (index * 50000 + 1800000) : + ((index < 7) ? (index * 50000 + 2600000) : + 3300000); + break; + } + break; + } + return ret; +} + +static int choose_voltage(struct regulator_dev *rdev, int min_uV, int max_uV) +{ + struct pm8607_regulator_info *info = rdev_get_drvdata(rdev); + uint8_t chip_id = info->chip->chip_id; + int val = -ENOENT; + int ret; + + switch (info->desc.id) { + case PM8607_ID_BUCK1: + if (min_uV >= 800000) /* 800mV ~ 1500mV / 25mV */ + val = (min_uV - 775001) / 25000; + else { /* 25mV ~ 775mV / 25mV */ + val = (min_uV + 249999) / 25000; + val += 32; + } + break; + case PM8607_ID_BUCK3: + if (info->slope_double) + min_uV = min_uV >> 1; + val = (min_uV + 249999) / 25000; /* 0mV ~ 1500mV / 25mV */ + + break; + case PM8607_ID_LDO1: + if (min_uV > 1800000) + val = 2; + else if (min_uV > 1200000) + val = 0; + else + val = 1; + break; + case PM8607_ID_LDO5: + if (min_uV > 3100000) + val = 3; + else /* 2900mV ~ 3100mV / 100mV */ + val = (min_uV - 2800001) / 100000; + break; + case PM8607_ID_LDO7: + case PM8607_ID_LDO8: + if (min_uV < 2700000) { /* 1800mV ~ 1900mV / 50mV */ + if (min_uV <= 1800000) + val = 0; /* 1800mv */ + else if (min_uV <= 1900000) + val = (min_uV - 1750001) / 50000; + else + val = 3; /* 2700mV */ + } else { /* 2700mV ~ 2900mV / 50mV */ + if (min_uV <= 2900000) { + val = (min_uV - 2650001) / 50000; + val += 3; + } else + val = -EINVAL; + } + break; + case PM8607_ID_LDO10: + if (min_uV > 2850000) + val = 7; + else if (min_uV <= 1200000) + val = 8; + else if (min_uV < 2700000) /* 1800mV ~ 1900mV / 50mV */ + val = (min_uV - 1750001) / 50000; + else { /* 2700mV ~ 2850mV / 50mV */ + val = (min_uV - 2650001) / 50000; + val += 3; + } + break; + case PM8607_ID_LDO12: + if (min_uV < 2700000) { /* 1800mV ~ 1900mV / 100mV */ + if (min_uV <= 1200000) + val = 8; /* 1200mV */ + else if (min_uV <= 1800000) + val = 0; /* 1800mV */ + else if (min_uV <= 1900000) + val = (min_uV - 1700001) / 100000; + else + val = 2; /* 2700mV */ + } else { /* 2700mV ~ 3100mV / 100mV */ + if (min_uV <= 3100000) { + val = (min_uV - 2600001) / 100000; + val += 2; + } else if (min_uV <= 3300000) + val = 7; + else + val = -EINVAL; + } + break; + case PM8607_ID_LDO2: + case PM8607_ID_LDO3: + case PM8607_ID_LDO9: + switch (chip_id) { + case PM8607_CHIP_A0: + case PM8607_CHIP_A1: + if (min_uV < 2700000) /* 1800mV ~ 1900mV / 50mV */ + if (min_uV <= 1800000) + val = 0; + else if (min_uV <= 1900000) + val = (min_uV - 1750001) / 50000; + else + val = 3; /* 2700mV */ + else { /* 2700mV ~ 2900mV / 50mV */ + if (min_uV <= 2900000) { + val = (min_uV - 2650001) / 50000; + val += 3; + } else + val = -EINVAL; + } + break; + case PM8607_CHIP_B0: + if (min_uV < 2700000) { /* 1800mV ~ 1900mV / 50mV */ + if (min_uV <= 1800000) + val = 0; + else if (min_uV <= 1900000) + val = (min_uV - 1750001) / 50000; + else + val = 3; /* 2700mV */ + } else { /* 2700mV ~ 2850mV / 50mV */ + if (min_uV <= 2850000) { + val = (min_uV - 2650001) / 50000; + val += 3; + } else if (min_uV <= 3300000) + val = 7; + else + val = -EINVAL; + } + break; + } + break; + case PM8607_ID_LDO4: + switch (chip_id) { + case PM8607_CHIP_A0: + case PM8607_CHIP_A1: + if (min_uV < 2700000) /* 1800mV ~ 1900mV / 50mV */ + if (min_uV <= 1800000) + val = 0; + else if (min_uV <= 1900000) + val = (min_uV - 1750001) / 50000; + else + val = 3; /* 2700mV */ + else { /* 2700mV ~ 2900mV / 50mV */ + if (min_uV <= 2900000) { + val = (min_uV - 2650001) / 50000; + val += 3; + } else + val = -EINVAL; + } + break; + case PM8607_CHIP_B0: + if (min_uV < 2700000) { /* 1800mV ~ 1900mV / 50mV */ + if (min_uV <= 1800000) + val = 0; + else if (min_uV <= 1900000) + val = (min_uV - 1750001) / 50000; + else + val = 3; /* 2700mV */ + } else { /* 2700mV ~ 2800mV / 50mV */ + if (min_uV <= 2850000) { + val = (min_uV - 2650001) / 50000; + val += 3; + } else if (min_uV <= 2900000) + val = 6; + else if (min_uV <= 3300000) + val = 7; + else + val = -EINVAL; + } + break; + } + break; + case PM8607_ID_LDO6: + switch (chip_id) { + case PM8607_CHIP_A0: + case PM8607_CHIP_A1: + if (min_uV < 2600000) { /* 1800mV ~ 1900mV / 50mV */ + if (min_uV <= 1800000) + val = 0; + else if (min_uV <= 1900000) + val = (min_uV - 1750001) / 50000; + else + val = 3; /* 2600mV */ + } else { /* 2600mV ~ 2800mV / 50mV */ + if (min_uV <= 2800000) { + val = (min_uV - 2550001) / 50000; + val += 3; + } else + val = -EINVAL; + } + break; + case PM8607_CHIP_B0: + if (min_uV < 2600000) { /* 1800mV ~ 1850mV / 50mV */ + if (min_uV <= 1800000) + val = 0; + else if (min_uV <= 1850000) + val = (min_uV - 1750001) / 50000; + else + val = 2; /* 2600mV */ + } else { /* 2600mV ~ 2800mV / 50mV */ + if (min_uV <= 2800000) { + val = (min_uV - 2550001) / 50000; + val += 2; + } else if (min_uV <= 3300000) + val = 7; + else + val = -EINVAL; + } + break; + } + break; + case PM8607_ID_LDO14: + switch (chip_id) { + case PM8607_CHIP_A0: + case PM8607_CHIP_A1: + if (min_uV < 2700000) { /* 1800mV ~ 1900mV / 50mV */ + if (min_uV <= 1800000) + val = 0; + else if (min_uV <= 1900000) + val = (min_uV - 1750001) / 50000; + else + val = 3; /* 2700mV */ + } else { /* 2700mV ~ 2900mV / 50mV */ + if (min_uV <= 2900000) { + val = (min_uV - 2650001) / 50000; + val += 3; + } else + val = -EINVAL; + } + break; + case PM8607_CHIP_B0: + if (min_uV < 2700000) { /* 1800mV ~ 1850mV / 50mV */ + if (min_uV <= 1800000) + val = 0; + else if (min_uV <= 1850000) + val = (min_uV - 1750001) / 50000; + else + val = 2; /* 2700mV */ + } else { /* 2700mV ~ 2900mV / 50mV */ + if (min_uV <= 2900000) { + val = (min_uV - 2650001) / 50000; + val += 2; + } else if (min_uV <= 3300000) + val = 7; + else + val = -EINVAL; + } + break; + } + break; + } + if (val >= 0) { + ret = pm8607_list_voltage(rdev, val); + if (ret > max_uV) { + pr_err("exceed voltage range (%d %d) uV", + min_uV, max_uV); + return -EINVAL; + } + } else + pr_err("invalid voltage range (%d %d) uV", min_uV, max_uV); + return val; +} + +static int pm8607_set_voltage(struct regulator_dev *rdev, + int min_uV, int max_uV) +{ + struct pm8607_regulator_info *info = rdev_get_drvdata(rdev); + struct pm8607_chip *chip = info->chip; + uint8_t val, mask; + int ret; + + if (check_range(info, min_uV, max_uV)) { + pr_err("invalid voltage range (%d, %d) uV\n", min_uV, max_uV); + return -EINVAL; + } + + ret = choose_voltage(rdev, min_uV, max_uV); + if (ret < 0) + return -EINVAL; + val = (uint8_t)(ret << info->vol_shift); + mask = ((1 << info->vol_nbits) - 1) << info->vol_shift; + + ret = pm8607_set_bits(chip, info->vol_reg, mask, val); + if (ret) + return ret; + switch (info->desc.id) { + case PM8607_ID_BUCK1: + case PM8607_ID_BUCK3: + ret = pm8607_set_bits(chip, info->update_reg, + 1 << info->update_bit, + 1 << info->update_bit); + break; + } + return ret; +} + +static int pm8607_get_voltage(struct regulator_dev *rdev) +{ + struct pm8607_regulator_info *info = rdev_get_drvdata(rdev); + struct pm8607_chip *chip = info->chip; + uint8_t val, mask; + int ret; + + ret = pm8607_reg_read(chip, info->vol_reg); + if (ret < 0) + return ret; + + mask = ((1 << info->vol_nbits) - 1) << info->vol_shift; + val = ((unsigned char)ret & mask) >> info->vol_shift; + + return pm8607_list_voltage(rdev, val); +} + +static int pm8607_enable(struct regulator_dev *rdev) +{ + struct pm8607_regulator_info *info = rdev_get_drvdata(rdev); + struct pm8607_chip *chip = info->chip; + + return pm8607_set_bits(chip, info->enable_reg, + 1 << info->enable_bit, + 1 << info->enable_bit); +} + +static int pm8607_disable(struct regulator_dev *rdev) +{ + struct pm8607_regulator_info *info = rdev_get_drvdata(rdev); + struct pm8607_chip *chip = info->chip; + + return pm8607_set_bits(chip, info->enable_reg, + 1 << info->enable_bit, 0); +} + +static int pm8607_is_enabled(struct regulator_dev *rdev) +{ + struct pm8607_regulator_info *info = rdev_get_drvdata(rdev); + struct pm8607_chip *chip = info->chip; + int ret; + + ret = pm8607_reg_read(chip, info->enable_reg); + if (ret < 0) + return ret; + + return !!((unsigned char)ret & (1 << info->enable_bit)); +} + +static struct regulator_ops pm8607_regulator_ops = { + .set_voltage = pm8607_set_voltage, + .get_voltage = pm8607_get_voltage, + .enable = pm8607_enable, + .disable = pm8607_disable, + .is_enabled = pm8607_is_enabled, +}; + +#define PM8607_DVC(_id, min, max, step, vreg, nbits, ureg, ubit, ereg, ebit) \ +{ \ + .desc = { \ + .name = "BUCK" #_id, \ + .ops = &pm8607_regulator_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = PM8607_ID_BUCK##_id, \ + .owner = THIS_MODULE, \ + }, \ + .min_uV = (min) * 1000, \ + .max_uV = (max) * 1000, \ + .step_uV = (step) * 1000, \ + .vol_reg = PM8607_##vreg, \ + .vol_shift = (0), \ + .vol_nbits = (nbits), \ + .update_reg = PM8607_##ureg, \ + .update_bit = (ubit), \ + .enable_reg = PM8607_##ereg, \ + .enable_bit = (ebit), \ + .slope_double = (0), \ +} + +#define PM8607_LDO(_id, min, max, step, vreg, shift, nbits, ereg, ebit) \ +{ \ + .desc = { \ + .name = "LDO" #_id, \ + .ops = &pm8607_regulator_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = PM8607_ID_LDO##_id, \ + .owner = THIS_MODULE, \ + }, \ + .min_uV = (min) * 1000, \ + .max_uV = (max) * 1000, \ + .step_uV = (step) * 1000, \ + .vol_reg = PM8607_##vreg, \ + .vol_shift = (shift), \ + .vol_nbits = (nbits), \ + .enable_reg = PM8607_##ereg, \ + .enable_bit = (ebit), \ + .slope_double = (0), \ +} + +static struct pm8607_regulator_info pm8607_regulator_info[] = { + PM8607_DVC(1, 0, 1500, 25, BUCK1, 6, GO, 0, SUPPLIES_EN11, 0), + PM8607_DVC(3, 0, 1500, 25, BUCK3, 6, GO, 2, SUPPLIES_EN11, 2), + + PM8607_LDO(1 , 1200, 2800, 0, LDO1 , 0, 2, SUPPLIES_EN11, 3), + PM8607_LDO(2 , 1800, 3300, 0, LDO2 , 0, 3, SUPPLIES_EN11, 4), + PM8607_LDO(3 , 1800, 3300, 0, LDO3 , 0, 3, SUPPLIES_EN11, 5), + PM8607_LDO(4 , 1800, 3300, 0, LDO4 , 0, 3, SUPPLIES_EN11, 6), + PM8607_LDO(5 , 2900, 3300, 0, LDO5 , 0, 2, SUPPLIES_EN11, 7), + PM8607_LDO(6 , 1800, 3300, 0, LDO6 , 0, 3, SUPPLIES_EN12, 0), + PM8607_LDO(7 , 1800, 2900, 0, LDO7 , 0, 3, SUPPLIES_EN12, 1), + PM8607_LDO(8 , 1800, 2900, 0, LDO8 , 0, 3, SUPPLIES_EN12, 2), + PM8607_LDO(9 , 1800, 3300, 0, LDO9 , 0, 3, SUPPLIES_EN12, 3), + PM8607_LDO(10, 1200, 3300, 0, LDO10, 0, 4, SUPPLIES_EN11, 4), + PM8607_LDO(12, 1200, 3300, 0, LDO12, 0, 4, SUPPLIES_EN11, 5), + PM8607_LDO(14, 1800, 3300, 0, LDO14, 0, 3, SUPPLIES_EN11, 6), +}; + +static inline struct pm8607_regulator_info *find_regulator_info(int id) +{ + struct pm8607_regulator_info *info; + int i; + + for (i = 0; i < ARRAY_SIZE(pm8607_regulator_info); i++) { + info = &pm8607_regulator_info[i]; + if (info->desc.id == id) + return info; + } + return NULL; +} + +static int __devinit pm8607_regulator_probe(struct platform_device *pdev) +{ + struct pm8607_chip *chip = dev_get_drvdata(pdev->dev.parent); + struct pm8607_platform_data *pdata = chip->dev->platform_data; + struct pm8607_regulator_info *info = NULL; + + info = find_regulator_info(pdev->id); + if (info == NULL) { + dev_err(&pdev->dev, "invalid regulator ID specified\n"); + return -EINVAL; + } + + info->chip = chip; + + info->regulator = regulator_register(&info->desc, &pdev->dev, + pdata->regulator[pdev->id], info); + if (IS_ERR(info->regulator)) { + dev_err(&pdev->dev, "failed to register regulator %s\n", + info->desc.name); + return PTR_ERR(info->regulator); + } + + /* check DVC ramp slope double */ + if (info->desc.id == PM8607_ID_BUCK3) + if (info->chip->buck3_double) + info->slope_double = 1; + + platform_set_drvdata(pdev, info); + return 0; +} + +static int __devexit pm8607_regulator_remove(struct platform_device *pdev) +{ + struct pm8607_regulator_info *info = platform_get_drvdata(pdev); + + regulator_unregister(info->regulator); + return 0; +} + +#define PM8607_REGULATOR_DRIVER(_name) \ +{ \ + .driver = { \ + .name = "88pm8607-" #_name, \ + .owner = THIS_MODULE, \ + }, \ + .probe = pm8607_regulator_probe, \ + .remove = __devexit_p(pm8607_regulator_remove), \ +} + +static struct platform_driver pm8607_regulator_driver[] = { + PM8607_REGULATOR_DRIVER(buck1), + PM8607_REGULATOR_DRIVER(buck2), + PM8607_REGULATOR_DRIVER(buck3), + PM8607_REGULATOR_DRIVER(ldo1), + PM8607_REGULATOR_DRIVER(ldo2), + PM8607_REGULATOR_DRIVER(ldo3), + PM8607_REGULATOR_DRIVER(ldo4), + PM8607_REGULATOR_DRIVER(ldo5), + PM8607_REGULATOR_DRIVER(ldo6), + PM8607_REGULATOR_DRIVER(ldo7), + PM8607_REGULATOR_DRIVER(ldo8), + PM8607_REGULATOR_DRIVER(ldo9), + PM8607_REGULATOR_DRIVER(ldo10), + PM8607_REGULATOR_DRIVER(ldo12), + PM8607_REGULATOR_DRIVER(ldo14), +}; + +static int __init pm8607_regulator_init(void) +{ + int i, count, ret; + + count = ARRAY_SIZE(pm8607_regulator_driver); + for (i = 0; i < count; i++) { + ret = platform_driver_register(&pm8607_regulator_driver[i]); + if (ret != 0) + pr_err("Failed to register regulator driver: %d\n", + ret); + } + return 0; +} +subsys_initcall(pm8607_regulator_init); + +static void __exit pm8607_regulator_exit(void) +{ + int i, count; + + count = ARRAY_SIZE(pm8607_regulator_driver); + for (i = 0; i < count; i++) + platform_driver_unregister(&pm8607_regulator_driver[i]); +} +module_exit(pm8607_regulator_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Haojian Zhuang <haojian.zhuang@marvell.com>"); +MODULE_DESCRIPTION("Regulator Driver for Marvell 88PM8607 PMIC"); +MODULE_ALIAS("platform:88pm8607-regulator"); diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 7cfdd65bebb4..262f62eec837 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -69,6 +69,13 @@ config REGULATOR_MAX1586 regulator via I2C bus. The provided regulator is suitable for PXA27x chips to control VCC_CORE and VCC_USIM voltages. +config REGULATOR_MAX8660 + tristate "Maxim 8660/8661 voltage regulator" + depends on I2C + help + This driver controls a Maxim 8660/8661 voltage output + regulator via I2C bus. + config REGULATOR_TWL4030 bool "TI TWL4030/TWL5030/TWL6030/TPS695x0 PMIC" depends on TWL4030_CORE @@ -157,5 +164,11 @@ config REGULATOR_TPS6507X three step-down converters and two general-purpose LDO voltage regulators. It supports TI's software based Class-2 SmartReflex implementation. +config REGULATOR_88PM8607 + bool "Marvell 88PM8607 Power regulators" + depends on MFD_88PM8607=y + help + This driver supports 88PM8607 voltage regulator chips. + endif diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 9ae3cc44e668..b3c806c79415 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -12,6 +12,7 @@ obj-$(CONFIG_REGULATOR_BQ24022) += bq24022.o obj-$(CONFIG_REGULATOR_LP3971) += lp3971.o obj-$(CONFIG_REGULATOR_MAX1586) += max1586.o obj-$(CONFIG_REGULATOR_TWL4030) += twl-regulator.o +obj-$(CONFIG_REGULATOR_MAX8660) += max8660.o obj-$(CONFIG_REGULATOR_WM831X) += wm831x-dcdc.o obj-$(CONFIG_REGULATOR_WM831X) += wm831x-isink.o obj-$(CONFIG_REGULATOR_WM831X) += wm831x-ldo.o @@ -20,10 +21,11 @@ obj-$(CONFIG_REGULATOR_WM8400) += wm8400-regulator.o obj-$(CONFIG_REGULATOR_DA903X) += da903x.o obj-$(CONFIG_REGULATOR_PCF50633) += pcf50633-regulator.o obj-$(CONFIG_REGULATOR_PCAP) += pcap-regulator.o -obj-$(CONFIG_REGULATOR_MC13783) += mc13783.o +obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o obj-$(CONFIG_REGULATOR_AB3100) += ab3100.o obj-$(CONFIG_REGULATOR_TPS65023) += tps65023-regulator.o obj-$(CONFIG_REGULATOR_TPS6507X) += tps6507x-regulator.o +obj-$(CONFIG_REGULATOR_88PM8607) += 88pm8607.o ccflags-$(CONFIG_REGULATOR_DEBUG) += -DDEBUG diff --git a/drivers/regulator/ab3100.c b/drivers/regulator/ab3100.c index 49aeee823a25..b349db4504b7 100644 --- a/drivers/regulator/ab3100.c +++ b/drivers/regulator/ab3100.c @@ -81,7 +81,7 @@ static const u8 ab3100_reg_init_order[AB3100_NUM_REGULATORS+2] = { #define LDO_C_VOLTAGE 2650000 #define LDO_D_VOLTAGE 2650000 -static const int const ldo_e_buck_typ_voltages[] = { +static const int ldo_e_buck_typ_voltages[] = { 1800000, 1400000, 1300000, @@ -91,7 +91,7 @@ static const int const ldo_e_buck_typ_voltages[] = { 900000, }; -static const int const ldo_f_typ_voltages[] = { +static const int ldo_f_typ_voltages[] = { 1800000, 1400000, 1300000, @@ -102,21 +102,21 @@ static const int const ldo_f_typ_voltages[] = { 2650000, }; -static const int const ldo_g_typ_voltages[] = { +static const int ldo_g_typ_voltages[] = { 2850000, 2750000, 1800000, 1500000, }; -static const int const ldo_h_typ_voltages[] = { +static const int ldo_h_typ_voltages[] = { 2750000, 1800000, 1500000, 1200000, }; -static const int const ldo_k_typ_voltages[] = { +static const int ldo_k_typ_voltages[] = { 2750000, 1800000, }; @@ -241,24 +241,12 @@ static int ab3100_disable_regulator(struct regulator_dev *reg) * LDO D is a special regulator. When it is disabled, the entire * system is shut down. So this is handled specially. */ + pr_info("Called ab3100_disable_regulator\n"); if (abreg->regreg == AB3100_LDO_D) { - int i; - dev_info(®->dev, "disabling LDO D - shut down system\n"); - /* - * Set regulators to default values, ignore any errors, - * we're going DOWN - */ - for (i = 0; i < ARRAY_SIZE(ab3100_reg_init_order); i++) { - (void) ab3100_set_register_interruptible(abreg->ab3100, - ab3100_reg_init_order[i], - abreg->plfdata->reg_initvals[i]); - } - /* Setting LDO D to 0x00 cuts the power to the SoC */ return ab3100_set_register_interruptible(abreg->ab3100, AB3100_LDO_D, 0x00U); - } /* @@ -607,13 +595,6 @@ static int __init ab3100_regulators_probe(struct platform_device *pdev) } } - if (err) { - dev_err(&pdev->dev, - "LDO D regulator initialization failed with error %d\n", - err); - return err; - } - /* Register the regulators */ for (i = 0; i < AB3100_NUM_REGULATORS; i++) { struct ab3100_regulator *reg = &ab3100_regulators[i]; @@ -688,7 +669,7 @@ static __init int ab3100_regulators_init(void) static __exit void ab3100_regulators_exit(void) { - platform_driver_register(&ab3100_regulators_driver); + platform_driver_unregister(&ab3100_regulators_driver); } subsys_initcall(ab3100_regulators_init); diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index efe568deda12..686ef270ecf7 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -66,6 +66,16 @@ static unsigned int _regulator_get_mode(struct regulator_dev *rdev); static void _notifier_call_chain(struct regulator_dev *rdev, unsigned long event, void *data); +static const char *rdev_get_name(struct regulator_dev *rdev) +{ + if (rdev->constraints && rdev->constraints->name) + return rdev->constraints->name; + else if (rdev->desc->name) + return rdev->desc->name; + else + return ""; +} + /* gets the regulator for a given consumer device */ static struct regulator *get_device_regulator(struct device *dev) { @@ -96,12 +106,12 @@ static int regulator_check_voltage(struct regulator_dev *rdev, if (!rdev->constraints) { printk(KERN_ERR "%s: no constraints for %s\n", __func__, - rdev->desc->name); + rdev_get_name(rdev)); return -ENODEV; } if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_VOLTAGE)) { printk(KERN_ERR "%s: operation not allowed for %s\n", - __func__, rdev->desc->name); + __func__, rdev_get_name(rdev)); return -EPERM; } @@ -124,12 +134,12 @@ static int regulator_check_current_limit(struct regulator_dev *rdev, if (!rdev->constraints) { printk(KERN_ERR "%s: no constraints for %s\n", __func__, - rdev->desc->name); + rdev_get_name(rdev)); return -ENODEV; } if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_CURRENT)) { printk(KERN_ERR "%s: operation not allowed for %s\n", - __func__, rdev->desc->name); + __func__, rdev_get_name(rdev)); return -EPERM; } @@ -159,17 +169,17 @@ static int regulator_check_mode(struct regulator_dev *rdev, int mode) if (!rdev->constraints) { printk(KERN_ERR "%s: no constraints for %s\n", __func__, - rdev->desc->name); + rdev_get_name(rdev)); return -ENODEV; } if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_MODE)) { printk(KERN_ERR "%s: operation not allowed for %s\n", - __func__, rdev->desc->name); + __func__, rdev_get_name(rdev)); return -EPERM; } if (!(rdev->constraints->valid_modes_mask & mode)) { printk(KERN_ERR "%s: invalid mode %x for %s\n", - __func__, mode, rdev->desc->name); + __func__, mode, rdev_get_name(rdev)); return -EINVAL; } return 0; @@ -180,12 +190,12 @@ static int regulator_check_drms(struct regulator_dev *rdev) { if (!rdev->constraints) { printk(KERN_ERR "%s: no constraints for %s\n", __func__, - rdev->desc->name); + rdev_get_name(rdev)); return -ENODEV; } if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_DRMS)) { printk(KERN_ERR "%s: operation not allowed for %s\n", - __func__, rdev->desc->name); + __func__, rdev_get_name(rdev)); return -EPERM; } return 0; @@ -230,16 +240,8 @@ static ssize_t regulator_name_show(struct device *dev, struct device_attribute *attr, char *buf) { struct regulator_dev *rdev = dev_get_drvdata(dev); - const char *name; - if (rdev->constraints && rdev->constraints->name) - name = rdev->constraints->name; - else if (rdev->desc->name) - name = rdev->desc->name; - else - name = ""; - - return sprintf(buf, "%s\n", name); + return sprintf(buf, "%s\n", rdev_get_name(rdev)); } static ssize_t regulator_print_opmode(char *buf, int mode) @@ -388,7 +390,7 @@ static ssize_t regulator_total_uA_show(struct device *dev, mutex_lock(&rdev->mutex); list_for_each_entry(regulator, &rdev->consumer_list, list) - uA += regulator->uA_load; + uA += regulator->uA_load; mutex_unlock(&rdev->mutex); return sprintf(buf, "%d\n", uA); } @@ -563,7 +565,7 @@ static void drms_uA_update(struct regulator_dev *rdev) /* calc total requested load */ list_for_each_entry(sibling, &rdev->consumer_list, list) - current_uA += sibling->uA_load; + current_uA += sibling->uA_load; /* now get the optimum mode for our new total regulator load */ mode = rdev->desc->ops->get_optimum_mode(rdev, input_uV, @@ -579,10 +581,29 @@ static int suspend_set_state(struct regulator_dev *rdev, struct regulator_state *rstate) { int ret = 0; + bool can_set_state; - /* enable & disable are mandatory for suspend control */ - if (!rdev->desc->ops->set_suspend_enable || - !rdev->desc->ops->set_suspend_disable) { + can_set_state = rdev->desc->ops->set_suspend_enable && + rdev->desc->ops->set_suspend_disable; + + /* If we have no suspend mode configration don't set anything; + * only warn if the driver actually makes the suspend mode + * configurable. + */ + if (!rstate->enabled && !rstate->disabled) { + if (can_set_state) + printk(KERN_WARNING "%s: No configuration for %s\n", + __func__, rdev_get_name(rdev)); + return 0; + } + + if (rstate->enabled && rstate->disabled) { + printk(KERN_ERR "%s: invalid configuration for %s\n", + __func__, rdev_get_name(rdev)); + return -EINVAL; + } + + if (!can_set_state) { printk(KERN_ERR "%s: no way to set suspend state\n", __func__); return -EINVAL; @@ -641,25 +662,43 @@ static void print_constraints(struct regulator_dev *rdev) { struct regulation_constraints *constraints = rdev->constraints; char buf[80]; - int count; + int count = 0; + int ret; - if (rdev->desc->type == REGULATOR_VOLTAGE) { + if (constraints->min_uV && constraints->max_uV) { if (constraints->min_uV == constraints->max_uV) - count = sprintf(buf, "%d mV ", - constraints->min_uV / 1000); + count += sprintf(buf + count, "%d mV ", + constraints->min_uV / 1000); else - count = sprintf(buf, "%d <--> %d mV ", - constraints->min_uV / 1000, - constraints->max_uV / 1000); - } else { + count += sprintf(buf + count, "%d <--> %d mV ", + constraints->min_uV / 1000, + constraints->max_uV / 1000); + } + + if (!constraints->min_uV || + constraints->min_uV != constraints->max_uV) { + ret = _regulator_get_voltage(rdev); + if (ret > 0) + count += sprintf(buf + count, "at %d mV ", ret / 1000); + } + + if (constraints->min_uA && constraints->max_uA) { if (constraints->min_uA == constraints->max_uA) - count = sprintf(buf, "%d mA ", - constraints->min_uA / 1000); + count += sprintf(buf + count, "%d mA ", + constraints->min_uA / 1000); else - count = sprintf(buf, "%d <--> %d mA ", - constraints->min_uA / 1000, - constraints->max_uA / 1000); + count += sprintf(buf + count, "%d <--> %d mA ", + constraints->min_uA / 1000, + constraints->max_uA / 1000); } + + if (!constraints->min_uA || + constraints->min_uA != constraints->max_uA) { + ret = _regulator_get_current_limit(rdev); + if (ret > 0) + count += sprintf(buf + count, "at %d uA ", ret / 1000); + } + if (constraints->valid_modes_mask & REGULATOR_MODE_FAST) count += sprintf(buf + count, "fast "); if (constraints->valid_modes_mask & REGULATOR_MODE_NORMAL) @@ -669,33 +708,30 @@ static void print_constraints(struct regulator_dev *rdev) if (constraints->valid_modes_mask & REGULATOR_MODE_STANDBY) count += sprintf(buf + count, "standby"); - printk(KERN_INFO "regulator: %s: %s\n", rdev->desc->name, buf); + printk(KERN_INFO "regulator: %s: %s\n", rdev_get_name(rdev), buf); } -/** - * set_machine_constraints - sets regulator constraints - * @rdev: regulator source - * @constraints: constraints to apply - * - * Allows platform initialisation code to define and constrain - * regulator circuits e.g. valid voltage/current ranges, etc. NOTE: - * Constraints *must* be set by platform code in order for some - * regulator operations to proceed i.e. set_voltage, set_current_limit, - * set_mode. - */ -static int set_machine_constraints(struct regulator_dev *rdev, +static int machine_constraints_voltage(struct regulator_dev *rdev, struct regulation_constraints *constraints) { - int ret = 0; - const char *name; struct regulator_ops *ops = rdev->desc->ops; + const char *name = rdev_get_name(rdev); + int ret; - if (constraints->name) - name = constraints->name; - else if (rdev->desc->name) - name = rdev->desc->name; - else - name = "regulator"; + /* do we need to apply the constraint voltage */ + if (rdev->constraints->apply_uV && + rdev->constraints->min_uV == rdev->constraints->max_uV && + ops->set_voltage) { + ret = ops->set_voltage(rdev, + rdev->constraints->min_uV, rdev->constraints->max_uV); + if (ret < 0) { + printk(KERN_ERR "%s: failed to apply %duV constraint to %s\n", + __func__, + rdev->constraints->min_uV, name); + rdev->constraints = NULL; + return ret; + } + } /* constrain machine-level voltage specs to fit * the actual range supported by this regulator. @@ -719,14 +755,13 @@ static int set_machine_constraints(struct regulator_dev *rdev, /* voltage constraints are optional */ if ((cmin == 0) && (cmax == 0)) - goto out; + return 0; /* else require explicit machine-level constraints */ if (cmin <= 0 || cmax <= 0 || cmax < cmin) { pr_err("%s: %s '%s' voltage constraints\n", __func__, "invalid", name); - ret = -EINVAL; - goto out; + return -EINVAL; } /* initial: [cmin..cmax] valid, [min_uV..max_uV] not */ @@ -748,8 +783,7 @@ static int set_machine_constraints(struct regulator_dev *rdev, if (max_uV < min_uV) { pr_err("%s: %s '%s' voltage constraints\n", __func__, "unsupportable", name); - ret = -EINVAL; - goto out; + return -EINVAL; } /* use regulator's subset of machine constraints */ @@ -767,22 +801,34 @@ static int set_machine_constraints(struct regulator_dev *rdev, } } + return 0; +} + +/** + * set_machine_constraints - sets regulator constraints + * @rdev: regulator source + * @constraints: constraints to apply + * + * Allows platform initialisation code to define and constrain + * regulator circuits e.g. valid voltage/current ranges, etc. NOTE: + * Constraints *must* be set by platform code in order for some + * regulator operations to proceed i.e. set_voltage, set_current_limit, + * set_mode. + */ +static int set_machine_constraints(struct regulator_dev *rdev, + struct regulation_constraints *constraints) +{ + int ret = 0; + const char *name; + struct regulator_ops *ops = rdev->desc->ops; + rdev->constraints = constraints; - /* do we need to apply the constraint voltage */ - if (rdev->constraints->apply_uV && - rdev->constraints->min_uV == rdev->constraints->max_uV && - ops->set_voltage) { - ret = ops->set_voltage(rdev, - rdev->constraints->min_uV, rdev->constraints->max_uV); - if (ret < 0) { - printk(KERN_ERR "%s: failed to apply %duV constraint to %s\n", - __func__, - rdev->constraints->min_uV, name); - rdev->constraints = NULL; - goto out; - } - } + name = rdev_get_name(rdev); + + ret = machine_constraints_voltage(rdev, constraints); + if (ret != 0) + goto out; /* do we need to setup our suspend state */ if (constraints->initial_state) { @@ -903,7 +949,7 @@ static int set_consumer_device_supply(struct regulator_dev *rdev, dev_name(&node->regulator->dev), node->regulator->desc->name, supply, - dev_name(&rdev->dev), rdev->desc->name); + dev_name(&rdev->dev), rdev_get_name(rdev)); return -EBUSY; } @@ -1212,7 +1258,7 @@ static int _regulator_enable(struct regulator_dev *rdev) ret = _regulator_enable(rdev->supply); if (ret < 0) { printk(KERN_ERR "%s: failed to enable %s: %d\n", - __func__, rdev->desc->name, ret); + __func__, rdev_get_name(rdev), ret); return ret; } } @@ -1238,7 +1284,7 @@ static int _regulator_enable(struct regulator_dev *rdev) } } else if (ret < 0) { printk(KERN_ERR "%s: is_enabled() failed for %s: %d\n", - __func__, rdev->desc->name, ret); + __func__, rdev_get_name(rdev), ret); return ret; } /* Fallthrough on positive return values - already enabled */ @@ -1279,7 +1325,7 @@ static int _regulator_disable(struct regulator_dev *rdev) if (WARN(rdev->use_count <= 0, "unbalanced disables for %s\n", - rdev->desc->name)) + rdev_get_name(rdev))) return -EIO; /* are we the last user and permitted to disable ? */ @@ -1292,7 +1338,7 @@ static int _regulator_disable(struct regulator_dev *rdev) ret = rdev->desc->ops->disable(rdev); if (ret < 0) { printk(KERN_ERR "%s: failed to disable %s\n", - __func__, rdev->desc->name); + __func__, rdev_get_name(rdev)); return ret; } } @@ -1349,7 +1395,7 @@ static int _regulator_force_disable(struct regulator_dev *rdev) ret = rdev->desc->ops->disable(rdev); if (ret < 0) { printk(KERN_ERR "%s: failed to force disable %s\n", - __func__, rdev->desc->name); + __func__, rdev_get_name(rdev)); return ret; } /* notify other consumers that power has been forced off */ @@ -1766,7 +1812,7 @@ int regulator_set_optimum_mode(struct regulator *regulator, int uA_load) output_uV = rdev->desc->ops->get_voltage(rdev); if (output_uV <= 0) { printk(KERN_ERR "%s: invalid output voltage found for %s\n", - __func__, rdev->desc->name); + __func__, rdev_get_name(rdev)); goto out; } @@ -1777,13 +1823,13 @@ int regulator_set_optimum_mode(struct regulator *regulator, int uA_load) input_uV = rdev->constraints->input_uV; if (input_uV <= 0) { printk(KERN_ERR "%s: invalid input voltage found for %s\n", - __func__, rdev->desc->name); + __func__, rdev_get_name(rdev)); goto out; } /* calc total requested load for this regulator */ list_for_each_entry(consumer, &rdev->consumer_list, list) - total_uA_load += consumer->uA_load; + total_uA_load += consumer->uA_load; mode = rdev->desc->ops->get_optimum_mode(rdev, input_uV, output_uV, @@ -1791,7 +1837,7 @@ int regulator_set_optimum_mode(struct regulator *regulator, int uA_load) ret = regulator_check_mode(rdev, mode); if (ret < 0) { printk(KERN_ERR "%s: failed to get optimum mode for %s @" - " %d uA %d -> %d uV\n", __func__, rdev->desc->name, + " %d uA %d -> %d uV\n", __func__, rdev_get_name(rdev), total_uA_load, input_uV, output_uV); goto out; } @@ -1799,7 +1845,7 @@ int regulator_set_optimum_mode(struct regulator *regulator, int uA_load) ret = rdev->desc->ops->set_mode(rdev, mode); if (ret < 0) { printk(KERN_ERR "%s: failed to set optimum mode %x for %s\n", - __func__, mode, rdev->desc->name); + __func__, mode, rdev_get_name(rdev)); goto out; } ret = mode; @@ -1852,9 +1898,9 @@ static void _notifier_call_chain(struct regulator_dev *rdev, /* now notify regulator we supply */ list_for_each_entry(_rdev, &rdev->supply_list, slist) { - mutex_lock(&_rdev->mutex); - _notifier_call_chain(_rdev, event, data); - mutex_unlock(&_rdev->mutex); + mutex_lock(&_rdev->mutex); + _notifier_call_chain(_rdev, event, data); + mutex_unlock(&_rdev->mutex); } } @@ -1885,9 +1931,9 @@ int regulator_bulk_get(struct device *dev, int num_consumers, consumers[i].consumer = regulator_get(dev, consumers[i].supply); if (IS_ERR(consumers[i].consumer)) { - dev_err(dev, "Failed to get supply '%s'\n", - consumers[i].supply); ret = PTR_ERR(consumers[i].consumer); + dev_err(dev, "Failed to get supply '%s': %d\n", + consumers[i].supply, ret); consumers[i].consumer = NULL; goto err; } @@ -1930,8 +1976,8 @@ int regulator_bulk_enable(int num_consumers, return 0; err: - printk(KERN_ERR "Failed to enable %s\n", consumers[i].supply); - for (i = 0; i < num_consumers; i++) + printk(KERN_ERR "Failed to enable %s: %d\n", consumers[i].supply, ret); + for (--i; i >= 0; --i) regulator_disable(consumers[i].consumer); return ret; @@ -1965,8 +2011,9 @@ int regulator_bulk_disable(int num_consumers, return 0; err: - printk(KERN_ERR "Failed to disable %s\n", consumers[i].supply); - for (i = 0; i < num_consumers; i++) + printk(KERN_ERR "Failed to disable %s: %d\n", consumers[i].supply, + ret); + for (--i; i >= 0; --i) regulator_enable(consumers[i].consumer); return ret; @@ -2316,7 +2363,7 @@ int regulator_suspend_prepare(suspend_state_t state) if (ret < 0) { printk(KERN_ERR "%s: failed to prepare %s\n", - __func__, rdev->desc->name); + __func__, rdev_get_name(rdev)); goto out; } } @@ -2429,12 +2476,7 @@ static int __init regulator_init_complete(void) ops = rdev->desc->ops; c = rdev->constraints; - if (c && c->name) - name = c->name; - else if (rdev->desc->name) - name = rdev->desc->name; - else - name = "regulator"; + name = rdev_get_name(rdev); if (!ops->disable || (c && c->always_on)) continue; diff --git a/drivers/regulator/da903x.c b/drivers/regulator/da903x.c index aa224d936e0d..f8c4661a7a81 100644 --- a/drivers/regulator/da903x.c +++ b/drivers/regulator/da903x.c @@ -331,7 +331,7 @@ static int da9034_get_ldo12_voltage(struct regulator_dev *rdev) static int da9034_list_ldo12_voltage(struct regulator_dev *rdev, unsigned selector) { - if (selector > ARRAY_SIZE(da9034_ldo12_data)) + if (selector >= ARRAY_SIZE(da9034_ldo12_data)) return -EINVAL; return da9034_ldo12_data[selector] * 1000; } diff --git a/drivers/regulator/lp3971.c b/drivers/regulator/lp3971.c index 7803a320543b..76d08c282f9c 100644 --- a/drivers/regulator/lp3971.c +++ b/drivers/regulator/lp3971.c @@ -446,8 +446,8 @@ static int setup_regulators(struct lp3971 *lp3971, lp3971->rdev[i] = regulator_register(®ulators[id], lp3971->dev, pdata->regulators[i].initdata, lp3971); - err = IS_ERR(lp3971->rdev[i]); - if (err) { + if (IS_ERR(lp3971->rdev[i])) { + err = PTR_ERR(lp3971->rdev[i]); dev_err(lp3971->dev, "regulator init failed: %d\n", err); goto error; diff --git a/drivers/regulator/max8660.c b/drivers/regulator/max8660.c new file mode 100644 index 000000000000..acc2fb7b6087 --- /dev/null +++ b/drivers/regulator/max8660.c @@ -0,0 +1,510 @@ +/* + * max8660.c -- Voltage regulation for the Maxim 8660/8661 + * + * based on max1586.c and wm8400-regulator.c + * + * Copyright (C) 2009 Wolfram Sang, Pengutronix e.K. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 59 Temple + * Place, Suite 330, Boston, MA 02111-1307 USA + * + * Some info: + * + * Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX8660-MAX8661.pdf + * + * This chip is a bit nasty because it is a write-only device. Thus, the driver + * uses shadow registers to keep track of its values. The main problem appears + * to be the initialization: When Linux boots up, we cannot know if the chip is + * in the default state or not, so we would have to pass such information in + * platform_data. As this adds a bit of complexity to the driver, this is left + * out for now until it is really needed. + * + * [A|S|M]DTV1 registers are currently not used, but [A|S|M]DTV2. + * + * If the driver is feature complete, it might be worth to check if one set of + * functions for V3-V7 is sufficient. For maximum flexibility during + * development, they are separated for now. + * + */ + +#include <linux/module.h> +#include <linux/err.h> +#include <linux/i2c.h> +#include <linux/platform_device.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/max8660.h> + +#define MAX8660_DCDC_MIN_UV 725000 +#define MAX8660_DCDC_MAX_UV 1800000 +#define MAX8660_DCDC_STEP 25000 +#define MAX8660_DCDC_MAX_SEL 0x2b + +#define MAX8660_LDO5_MIN_UV 1700000 +#define MAX8660_LDO5_MAX_UV 2000000 +#define MAX8660_LDO5_STEP 25000 +#define MAX8660_LDO5_MAX_SEL 0x0c + +#define MAX8660_LDO67_MIN_UV 1800000 +#define MAX8660_LDO67_MAX_UV 3300000 +#define MAX8660_LDO67_STEP 100000 +#define MAX8660_LDO67_MAX_SEL 0x0f + +enum { + MAX8660_OVER1, + MAX8660_OVER2, + MAX8660_VCC1, + MAX8660_ADTV1, + MAX8660_ADTV2, + MAX8660_SDTV1, + MAX8660_SDTV2, + MAX8660_MDTV1, + MAX8660_MDTV2, + MAX8660_L12VCR, + MAX8660_FPWM, + MAX8660_N_REGS, /* not a real register */ +}; + +struct max8660 { + struct i2c_client *client; + u8 shadow_regs[MAX8660_N_REGS]; /* as chip is write only */ + struct regulator_dev *rdev[]; +}; + +static int max8660_write(struct max8660 *max8660, u8 reg, u8 mask, u8 val) +{ + static const u8 max8660_addresses[MAX8660_N_REGS] = + { 0x10, 0x12, 0x20, 0x23, 0x24, 0x29, 0x2a, 0x32, 0x33, 0x39, 0x80 }; + + int ret; + u8 reg_val = (max8660->shadow_regs[reg] & mask) | val; + dev_vdbg(&max8660->client->dev, "Writing reg %02x with %02x\n", + max8660_addresses[reg], reg_val); + + ret = i2c_smbus_write_byte_data(max8660->client, + max8660_addresses[reg], reg_val); + if (ret == 0) + max8660->shadow_regs[reg] = reg_val; + + return ret; +} + + +/* + * DCDC functions + */ + +static int max8660_dcdc_is_enabled(struct regulator_dev *rdev) +{ + struct max8660 *max8660 = rdev_get_drvdata(rdev); + u8 val = max8660->shadow_regs[MAX8660_OVER1]; + u8 mask = (rdev_get_id(rdev) == MAX8660_V3) ? 1 : 4; + return !!(val & mask); +} + +static int max8660_dcdc_enable(struct regulator_dev *rdev) +{ + struct max8660 *max8660 = rdev_get_drvdata(rdev); + u8 bit = (rdev_get_id(rdev) == MAX8660_V3) ? 1 : 4; + return max8660_write(max8660, MAX8660_OVER1, 0xff, bit); +} + +static int max8660_dcdc_disable(struct regulator_dev *rdev) +{ + struct max8660 *max8660 = rdev_get_drvdata(rdev); + u8 mask = (rdev_get_id(rdev) == MAX8660_V3) ? ~1 : ~4; + return max8660_write(max8660, MAX8660_OVER1, mask, 0); +} + +static int max8660_dcdc_list(struct regulator_dev *rdev, unsigned selector) +{ + if (selector > MAX8660_DCDC_MAX_SEL) + return -EINVAL; + return MAX8660_DCDC_MIN_UV + selector * MAX8660_DCDC_STEP; +} + +static int max8660_dcdc_get(struct regulator_dev *rdev) +{ + struct max8660 *max8660 = rdev_get_drvdata(rdev); + u8 reg = (rdev_get_id(rdev) == MAX8660_V3) ? MAX8660_ADTV2 : MAX8660_SDTV2; + u8 selector = max8660->shadow_regs[reg]; + return MAX8660_DCDC_MIN_UV + selector * MAX8660_DCDC_STEP; +} + +static int max8660_dcdc_set(struct regulator_dev *rdev, int min_uV, int max_uV) +{ + struct max8660 *max8660 = rdev_get_drvdata(rdev); + u8 reg, selector, bits; + int ret; + + if (min_uV < MAX8660_DCDC_MIN_UV || min_uV > MAX8660_DCDC_MAX_UV) + return -EINVAL; + if (max_uV < MAX8660_DCDC_MIN_UV || max_uV > MAX8660_DCDC_MAX_UV) + return -EINVAL; + + selector = (min_uV - (MAX8660_DCDC_MIN_UV - MAX8660_DCDC_STEP + 1)) + / MAX8660_DCDC_STEP; + + ret = max8660_dcdc_list(rdev, selector); + if (ret < 0 || ret > max_uV) + return -EINVAL; + + reg = (rdev_get_id(rdev) == MAX8660_V3) ? MAX8660_ADTV2 : MAX8660_SDTV2; + ret = max8660_write(max8660, reg, 0, selector); + if (ret) + return ret; + + /* Select target voltage register and activate regulation */ + bits = (rdev_get_id(rdev) == MAX8660_V3) ? 0x03 : 0x30; + return max8660_write(max8660, MAX8660_VCC1, 0xff, bits); +} + +static struct regulator_ops max8660_dcdc_ops = { + .is_enabled = max8660_dcdc_is_enabled, + .list_voltage = max8660_dcdc_list, + .set_voltage = max8660_dcdc_set, + .get_voltage = max8660_dcdc_get, +}; + + +/* + * LDO5 functions + */ + +static int max8660_ldo5_list(struct regulator_dev *rdev, unsigned selector) +{ + if (selector > MAX8660_LDO5_MAX_SEL) + return -EINVAL; + return MAX8660_LDO5_MIN_UV + selector * MAX8660_LDO5_STEP; +} + +static int max8660_ldo5_get(struct regulator_dev *rdev) +{ + struct max8660 *max8660 = rdev_get_drvdata(rdev); + u8 selector = max8660->shadow_regs[MAX8660_MDTV2]; + + return MAX8660_LDO5_MIN_UV + selector * MAX8660_LDO5_STEP; +} + +static int max8660_ldo5_set(struct regulator_dev *rdev, int min_uV, int max_uV) +{ + struct max8660 *max8660 = rdev_get_drvdata(rdev); + u8 selector; + int ret; + + if (min_uV < MAX8660_LDO5_MIN_UV || min_uV > MAX8660_LDO5_MAX_UV) + return -EINVAL; + if (max_uV < MAX8660_LDO5_MIN_UV || max_uV > MAX8660_LDO5_MAX_UV) + return -EINVAL; + + selector = (min_uV - (MAX8660_LDO5_MIN_UV - MAX8660_LDO5_STEP + 1)) + / MAX8660_LDO5_STEP; + ret = max8660_ldo5_list(rdev, selector); + if (ret < 0 || ret > max_uV) + return -EINVAL; + + ret = max8660_write(max8660, MAX8660_MDTV2, 0, selector); + if (ret) + return ret; + + /* Select target voltage register and activate regulation */ + return max8660_write(max8660, MAX8660_VCC1, 0xff, 0xc0); +} + +static struct regulator_ops max8660_ldo5_ops = { + .list_voltage = max8660_ldo5_list, + .set_voltage = max8660_ldo5_set, + .get_voltage = max8660_ldo5_get, +}; + + +/* + * LDO67 functions + */ + +static int max8660_ldo67_is_enabled(struct regulator_dev *rdev) +{ + struct max8660 *max8660 = rdev_get_drvdata(rdev); + u8 val = max8660->shadow_regs[MAX8660_OVER2]; + u8 mask = (rdev_get_id(rdev) == MAX8660_V6) ? 2 : 4; + return !!(val & mask); +} + +static int max8660_ldo67_enable(struct regulator_dev *rdev) +{ + struct max8660 *max8660 = rdev_get_drvdata(rdev); + u8 bit = (rdev_get_id(rdev) == MAX8660_V6) ? 2 : 4; + return max8660_write(max8660, MAX8660_OVER2, 0xff, bit); +} + +static int max8660_ldo67_disable(struct regulator_dev *rdev) +{ + struct max8660 *max8660 = rdev_get_drvdata(rdev); + u8 mask = (rdev_get_id(rdev) == MAX8660_V6) ? ~2 : ~4; + return max8660_write(max8660, MAX8660_OVER2, mask, 0); +} + +static int max8660_ldo67_list(struct regulator_dev *rdev, unsigned selector) +{ + if (selector > MAX8660_LDO67_MAX_SEL) + return -EINVAL; + return MAX8660_LDO67_MIN_UV + selector * MAX8660_LDO67_STEP; +} + +static int max8660_ldo67_get(struct regulator_dev *rdev) +{ + struct max8660 *max8660 = rdev_get_drvdata(rdev); + u8 shift = (rdev_get_id(rdev) == MAX8660_V6) ? 0 : 4; + u8 selector = (max8660->shadow_regs[MAX8660_L12VCR] >> shift) & 0xf; + + return MAX8660_LDO67_MIN_UV + selector * MAX8660_LDO67_STEP; +} + +static int max8660_ldo67_set(struct regulator_dev *rdev, int min_uV, int max_uV) +{ + struct max8660 *max8660 = rdev_get_drvdata(rdev); + u8 selector; + int ret; + + if (min_uV < MAX8660_LDO67_MIN_UV || min_uV > MAX8660_LDO67_MAX_UV) + return -EINVAL; + if (max_uV < MAX8660_LDO67_MIN_UV || max_uV > MAX8660_LDO67_MAX_UV) + return -EINVAL; + + selector = (min_uV - (MAX8660_LDO67_MIN_UV - MAX8660_LDO67_STEP + 1)) + / MAX8660_LDO67_STEP; + + ret = max8660_ldo67_list(rdev, selector); + if (ret < 0 || ret > max_uV) + return -EINVAL; + + if (rdev_get_id(rdev) == MAX8660_V6) + return max8660_write(max8660, MAX8660_L12VCR, 0xf0, selector); + else + return max8660_write(max8660, MAX8660_L12VCR, 0x0f, selector << 4); +} + +static struct regulator_ops max8660_ldo67_ops = { + .is_enabled = max8660_ldo67_is_enabled, + .enable = max8660_ldo67_enable, + .disable = max8660_ldo67_disable, + .list_voltage = max8660_ldo67_list, + .get_voltage = max8660_ldo67_get, + .set_voltage = max8660_ldo67_set, +}; + +static struct regulator_desc max8660_reg[] = { + { + .name = "V3(DCDC)", + .id = MAX8660_V3, + .ops = &max8660_dcdc_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = MAX8660_DCDC_MAX_SEL + 1, + .owner = THIS_MODULE, + }, + { + .name = "V4(DCDC)", + .id = MAX8660_V4, + .ops = &max8660_dcdc_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = MAX8660_DCDC_MAX_SEL + 1, + .owner = THIS_MODULE, + }, + { + .name = "V5(LDO)", + .id = MAX8660_V5, + .ops = &max8660_ldo5_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = MAX8660_LDO5_MAX_SEL + 1, + .owner = THIS_MODULE, + }, + { + .name = "V6(LDO)", + .id = MAX8660_V6, + .ops = &max8660_ldo67_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = MAX8660_LDO67_MAX_SEL + 1, + .owner = THIS_MODULE, + }, + { + .name = "V7(LDO)", + .id = MAX8660_V7, + .ops = &max8660_ldo67_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = MAX8660_LDO67_MAX_SEL + 1, + .owner = THIS_MODULE, + }, +}; + +static int max8660_probe(struct i2c_client *client, + const struct i2c_device_id *i2c_id) +{ + struct regulator_dev **rdev; + struct max8660_platform_data *pdata = client->dev.platform_data; + struct max8660 *max8660; + int boot_on, i, id, ret = -EINVAL; + + if (pdata->num_subdevs > MAX8660_V_END) { + dev_err(&client->dev, "Too much regulators found!\n"); + goto out; + } + + max8660 = kzalloc(sizeof(struct max8660) + + sizeof(struct regulator_dev *) * MAX8660_V_END, + GFP_KERNEL); + if (!max8660) { + ret = -ENOMEM; + goto out; + } + + max8660->client = client; + rdev = max8660->rdev; + + if (pdata->en34_is_high) { + /* Simulate always on */ + max8660->shadow_regs[MAX8660_OVER1] = 5; + } else { + /* Otherwise devices can be toggled via software */ + max8660_dcdc_ops.enable = max8660_dcdc_enable; + max8660_dcdc_ops.disable = max8660_dcdc_disable; + } + + /* + * First, set up shadow registers to prevent glitches. As some + * registers are shared between regulators, everything must be properly + * set up for all regulators in advance. + */ + max8660->shadow_regs[MAX8660_ADTV1] = + max8660->shadow_regs[MAX8660_ADTV2] = + max8660->shadow_regs[MAX8660_SDTV1] = + max8660->shadow_regs[MAX8660_SDTV2] = 0x1b; + max8660->shadow_regs[MAX8660_MDTV1] = + max8660->shadow_regs[MAX8660_MDTV2] = 0x04; + + for (i = 0; i < pdata->num_subdevs; i++) { + + if (!pdata->subdevs[i].platform_data) + goto err_free; + + boot_on = pdata->subdevs[i].platform_data->constraints.boot_on; + + switch (pdata->subdevs[i].id) { + case MAX8660_V3: + if (boot_on) + max8660->shadow_regs[MAX8660_OVER1] |= 1; + break; + + case MAX8660_V4: + if (boot_on) + max8660->shadow_regs[MAX8660_OVER1] |= 4; + break; + + case MAX8660_V5: + break; + + case MAX8660_V6: + if (boot_on) + max8660->shadow_regs[MAX8660_OVER2] |= 2; + break; + + case MAX8660_V7: + if (!strcmp(i2c_id->name, "max8661")) { + dev_err(&client->dev, "Regulator not on this chip!\n"); + goto err_free; + } + + if (boot_on) + max8660->shadow_regs[MAX8660_OVER2] |= 4; + break; + + default: + dev_err(&client->dev, "invalid regulator %s\n", + pdata->subdevs[i].name); + goto err_free; + } + } + + /* Finally register devices */ + for (i = 0; i < pdata->num_subdevs; i++) { + + id = pdata->subdevs[i].id; + + rdev[i] = regulator_register(&max8660_reg[id], &client->dev, + pdata->subdevs[i].platform_data, + max8660); + if (IS_ERR(rdev[i])) { + ret = PTR_ERR(rdev[i]); + dev_err(&client->dev, "failed to register %s\n", + max8660_reg[id].name); + goto err_unregister; + } + } + + i2c_set_clientdata(client, rdev); + dev_info(&client->dev, "Maxim 8660/8661 regulator driver loaded\n"); + return 0; + +err_unregister: + while (--i >= 0) + regulator_unregister(rdev[i]); +err_free: + kfree(max8660); +out: + return ret; +} + +static int max8660_remove(struct i2c_client *client) +{ + struct regulator_dev **rdev = i2c_get_clientdata(client); + int i; + + for (i = 0; i < MAX8660_V_END; i++) + if (rdev[i]) + regulator_unregister(rdev[i]); + kfree(rdev); + i2c_set_clientdata(client, NULL); + + return 0; +} + +static const struct i2c_device_id max8660_id[] = { + { "max8660", 0 }, + { "max8661", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, max8660_id); + +static struct i2c_driver max8660_driver = { + .probe = max8660_probe, + .remove = max8660_remove, + .driver = { + .name = "max8660", + }, + .id_table = max8660_id, +}; + +static int __init max8660_init(void) +{ + return i2c_add_driver(&max8660_driver); +} +subsys_initcall(max8660_init); + +static void __exit max8660_exit(void) +{ + i2c_del_driver(&max8660_driver); +} +module_exit(max8660_exit); + +/* Module information */ +MODULE_DESCRIPTION("MAXIM 8660/8661 voltage regulator driver"); +MODULE_AUTHOR("Wolfram Sang"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/regulator/mc13783-regulator.c b/drivers/regulator/mc13783-regulator.c new file mode 100644 index 000000000000..39c495300045 --- /dev/null +++ b/drivers/regulator/mc13783-regulator.c @@ -0,0 +1,245 @@ +/* + * Regulator Driver for Freescale MC13783 PMIC + * + * Copyright (C) 2008 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/mfd/mc13783.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/driver.h> +#include <linux/platform_device.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/err.h> + +#define MC13783_REG_SWITCHERS4 28 +#define MC13783_REG_SWITCHERS4_PLLEN (1 << 18) + +#define MC13783_REG_SWITCHERS5 29 +#define MC13783_REG_SWITCHERS5_SW3EN (1 << 20) + +#define MC13783_REG_REGULATORMODE0 32 +#define MC13783_REG_REGULATORMODE0_VAUDIOEN (1 << 0) +#define MC13783_REG_REGULATORMODE0_VIOHIEN (1 << 3) +#define MC13783_REG_REGULATORMODE0_VIOLOEN (1 << 6) +#define MC13783_REG_REGULATORMODE0_VDIGEN (1 << 9) +#define MC13783_REG_REGULATORMODE0_VGENEN (1 << 12) +#define MC13783_REG_REGULATORMODE0_VRFDIGEN (1 << 15) +#define MC13783_REG_REGULATORMODE0_VRFREFEN (1 << 18) +#define MC13783_REG_REGULATORMODE0_VRFCPEN (1 << 21) + +#define MC13783_REG_REGULATORMODE1 33 +#define MC13783_REG_REGULATORMODE1_VSIMEN (1 << 0) +#define MC13783_REG_REGULATORMODE1_VESIMEN (1 << 3) +#define MC13783_REG_REGULATORMODE1_VCAMEN (1 << 6) +#define MC13783_REG_REGULATORMODE1_VRFBGEN (1 << 9) +#define MC13783_REG_REGULATORMODE1_VVIBEN (1 << 11) +#define MC13783_REG_REGULATORMODE1_VRF1EN (1 << 12) +#define MC13783_REG_REGULATORMODE1_VRF2EN (1 << 15) +#define MC13783_REG_REGULATORMODE1_VMMC1EN (1 << 18) +#define MC13783_REG_REGULATORMODE1_VMMC2EN (1 << 21) + +#define MC13783_REG_POWERMISC 34 +#define MC13783_REG_POWERMISC_GPO1EN (1 << 6) +#define MC13783_REG_POWERMISC_GPO2EN (1 << 8) +#define MC13783_REG_POWERMISC_GPO3EN (1 << 10) +#define MC13783_REG_POWERMISC_GPO4EN (1 << 12) + +struct mc13783_regulator { + struct regulator_desc desc; + int reg; + int enable_bit; +}; + +static struct regulator_ops mc13783_regulator_ops; + +#define MC13783_DEFINE(prefix, _name, _reg) \ + [MC13783_ ## prefix ## _ ## _name] = { \ + .desc = { \ + .name = #prefix "_" #_name, \ + .ops = &mc13783_regulator_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = MC13783_ ## prefix ## _ ## _name, \ + .owner = THIS_MODULE, \ + }, \ + .reg = MC13783_REG_ ## _reg, \ + .enable_bit = MC13783_REG_ ## _reg ## _ ## _name ## EN, \ + } + +#define MC13783_DEFINE_SW(_name, _reg) MC13783_DEFINE(SW, _name, _reg) +#define MC13783_DEFINE_REGU(_name, _reg) MC13783_DEFINE(REGU, _name, _reg) + +static struct mc13783_regulator mc13783_regulators[] = { + MC13783_DEFINE_SW(SW3, SWITCHERS5), + MC13783_DEFINE_SW(PLL, SWITCHERS4), + + MC13783_DEFINE_REGU(VAUDIO, REGULATORMODE0), + MC13783_DEFINE_REGU(VIOHI, REGULATORMODE0), + MC13783_DEFINE_REGU(VIOLO, REGULATORMODE0), + MC13783_DEFINE_REGU(VDIG, REGULATORMODE0), + MC13783_DEFINE_REGU(VGEN, REGULATORMODE0), + MC13783_DEFINE_REGU(VRFDIG, REGULATORMODE0), + MC13783_DEFINE_REGU(VRFREF, REGULATORMODE0), + MC13783_DEFINE_REGU(VRFCP, REGULATORMODE0), + MC13783_DEFINE_REGU(VSIM, REGULATORMODE1), + MC13783_DEFINE_REGU(VESIM, REGULATORMODE1), + MC13783_DEFINE_REGU(VCAM, REGULATORMODE1), + MC13783_DEFINE_REGU(VRFBG, REGULATORMODE1), + MC13783_DEFINE_REGU(VVIB, REGULATORMODE1), + MC13783_DEFINE_REGU(VRF1, REGULATORMODE1), + MC13783_DEFINE_REGU(VRF2, REGULATORMODE1), + MC13783_DEFINE_REGU(VMMC1, REGULATORMODE1), + MC13783_DEFINE_REGU(VMMC2, REGULATORMODE1), + MC13783_DEFINE_REGU(GPO1, POWERMISC), + MC13783_DEFINE_REGU(GPO2, POWERMISC), + MC13783_DEFINE_REGU(GPO3, POWERMISC), + MC13783_DEFINE_REGU(GPO4, POWERMISC), +}; + +struct mc13783_regulator_priv { + struct mc13783 *mc13783; + struct regulator_dev *regulators[]; +}; + +static int mc13783_regulator_enable(struct regulator_dev *rdev) +{ + struct mc13783_regulator_priv *priv = rdev_get_drvdata(rdev); + int id = rdev_get_id(rdev); + int ret; + + dev_dbg(rdev_get_dev(rdev), "%s id: %d\n", __func__, id); + + mc13783_lock(priv->mc13783); + ret = mc13783_reg_rmw(priv->mc13783, mc13783_regulators[id].reg, + mc13783_regulators[id].enable_bit, + mc13783_regulators[id].enable_bit); + mc13783_unlock(priv->mc13783); + + return ret; +} + +static int mc13783_regulator_disable(struct regulator_dev *rdev) +{ + struct mc13783_regulator_priv *priv = rdev_get_drvdata(rdev); + int id = rdev_get_id(rdev); + int ret; + + dev_dbg(rdev_get_dev(rdev), "%s id: %d\n", __func__, id); + + mc13783_lock(priv->mc13783); + ret = mc13783_reg_rmw(priv->mc13783, mc13783_regulators[id].reg, + mc13783_regulators[id].enable_bit, 0); + mc13783_unlock(priv->mc13783); + + return ret; +} + +static int mc13783_regulator_is_enabled(struct regulator_dev *rdev) +{ + struct mc13783_regulator_priv *priv = rdev_get_drvdata(rdev); + int ret, id = rdev_get_id(rdev); + unsigned int val; + + mc13783_lock(priv->mc13783); + ret = mc13783_reg_read(priv->mc13783, mc13783_regulators[id].reg, &val); + mc13783_unlock(priv->mc13783); + + if (ret) + return ret; + + return (val & mc13783_regulators[id].enable_bit) != 0; +} + +static struct regulator_ops mc13783_regulator_ops = { + .enable = mc13783_regulator_enable, + .disable = mc13783_regulator_disable, + .is_enabled = mc13783_regulator_is_enabled, +}; + +static int __devinit mc13783_regulator_probe(struct platform_device *pdev) +{ + struct mc13783_regulator_priv *priv; + struct mc13783 *mc13783 = dev_get_drvdata(pdev->dev.parent); + struct mc13783_regulator_platform_data *pdata = + dev_get_platdata(&pdev->dev); + struct mc13783_regulator_init_data *init_data; + int i, ret; + + dev_dbg(&pdev->dev, "mc13783_regulator_probe id %d\n", pdev->id); + + priv = kzalloc(sizeof(*priv) + + pdata->num_regulators * sizeof(priv->regulators[0]), + GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->mc13783 = mc13783; + + for (i = 0; i < pdata->num_regulators; i++) { + init_data = &pdata->regulators[i]; + priv->regulators[i] = regulator_register( + &mc13783_regulators[init_data->id].desc, + &pdev->dev, init_data->init_data, priv); + + if (IS_ERR(priv->regulators[i])) { + dev_err(&pdev->dev, "failed to register regulator %s\n", + mc13783_regulators[i].desc.name); + ret = PTR_ERR(priv->regulators[i]); + goto err; + } + } + + platform_set_drvdata(pdev, priv); + + return 0; +err: + while (--i >= 0) + regulator_unregister(priv->regulators[i]); + + kfree(priv); + + return ret; +} + +static int __devexit mc13783_regulator_remove(struct platform_device *pdev) +{ + struct mc13783_regulator_priv *priv = platform_get_drvdata(pdev); + struct mc13783_regulator_platform_data *pdata = + dev_get_platdata(&pdev->dev); + int i; + + for (i = 0; i < pdata->num_regulators; i++) + regulator_unregister(priv->regulators[i]); + + return 0; +} + +static struct platform_driver mc13783_regulator_driver = { + .driver = { + .name = "mc13783-regulator", + .owner = THIS_MODULE, + }, + .remove = __devexit_p(mc13783_regulator_remove), + .probe = mc13783_regulator_probe, +}; + +static int __init mc13783_regulator_init(void) +{ + return platform_driver_register(&mc13783_regulator_driver); +} +subsys_initcall(mc13783_regulator_init); + +static void __exit mc13783_regulator_exit(void) +{ + platform_driver_unregister(&mc13783_regulator_driver); +} +module_exit(mc13783_regulator_exit); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de"); +MODULE_DESCRIPTION("Regulator Driver for Freescale MC13783 PMIC"); +MODULE_ALIAS("platform:mc13783-regulator"); diff --git a/drivers/regulator/mc13783.c b/drivers/regulator/mc13783.c deleted file mode 100644 index 710211f67449..000000000000 --- a/drivers/regulator/mc13783.c +++ /dev/null @@ -1,410 +0,0 @@ -/* - * Regulator Driver for Freescale MC13783 PMIC - * - * Copyright (C) 2008 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/mfd/mc13783-private.h> -#include <linux/regulator/machine.h> -#include <linux/regulator/driver.h> -#include <linux/platform_device.h> -#include <linux/mfd/mc13783.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/err.h> - -struct mc13783_regulator { - struct regulator_desc desc; - int reg; - int enable_bit; -}; - -static struct regulator_ops mc13783_regulator_ops; - -static struct mc13783_regulator mc13783_regulators[] = { - [MC13783_SW_SW3] = { - .desc = { - .name = "SW_SW3", - .ops = &mc13783_regulator_ops, - .type = REGULATOR_VOLTAGE, - .id = MC13783_SW_SW3, - .owner = THIS_MODULE, - }, - .reg = MC13783_REG_SWITCHERS_5, - .enable_bit = MC13783_SWCTRL_SW3_EN, - }, - [MC13783_SW_PLL] = { - .desc = { - .name = "SW_PLL", - .ops = &mc13783_regulator_ops, - .type = REGULATOR_VOLTAGE, - .id = MC13783_SW_PLL, - .owner = THIS_MODULE, - }, - .reg = MC13783_REG_SWITCHERS_4, - .enable_bit = MC13783_SWCTRL_PLL_EN, - }, - [MC13783_REGU_VAUDIO] = { - .desc = { - .name = "REGU_VAUDIO", - .ops = &mc13783_regulator_ops, - .type = REGULATOR_VOLTAGE, - .id = MC13783_REGU_VAUDIO, - .owner = THIS_MODULE, - }, - .reg = MC13783_REG_REGULATOR_MODE_0, - .enable_bit = MC13783_REGCTRL_VAUDIO_EN, - }, - [MC13783_REGU_VIOHI] = { - .desc = { - .name = "REGU_VIOHI", - .ops = &mc13783_regulator_ops, - .type = REGULATOR_VOLTAGE, - .id = MC13783_REGU_VIOHI, - .owner = THIS_MODULE, - }, - .reg = MC13783_REG_REGULATOR_MODE_0, - .enable_bit = MC13783_REGCTRL_VIOHI_EN, - }, - [MC13783_REGU_VIOLO] = { - .desc = { - .name = "REGU_VIOLO", - .ops = &mc13783_regulator_ops, - .type = REGULATOR_VOLTAGE, - .id = MC13783_REGU_VIOLO, - .owner = THIS_MODULE, - }, - .reg = MC13783_REG_REGULATOR_MODE_0, - .enable_bit = MC13783_REGCTRL_VIOLO_EN, - }, - [MC13783_REGU_VDIG] = { - .desc = { - .name = "REGU_VDIG", - .ops = &mc13783_regulator_ops, - .type = REGULATOR_VOLTAGE, - .id = MC13783_REGU_VDIG, - .owner = THIS_MODULE, - }, - .reg = MC13783_REG_REGULATOR_MODE_0, - .enable_bit = MC13783_REGCTRL_VDIG_EN, - }, - [MC13783_REGU_VGEN] = { - .desc = { - .name = "REGU_VGEN", - .ops = &mc13783_regulator_ops, - .type = REGULATOR_VOLTAGE, - .id = MC13783_REGU_VGEN, - .owner = THIS_MODULE, - }, - .reg = MC13783_REG_REGULATOR_MODE_0, - .enable_bit = MC13783_REGCTRL_VGEN_EN, - }, - [MC13783_REGU_VRFDIG] = { - .desc = { - .name = "REGU_VRFDIG", - .ops = &mc13783_regulator_ops, - .type = REGULATOR_VOLTAGE, - .id = MC13783_REGU_VRFDIG, - .owner = THIS_MODULE, - }, - .reg = MC13783_REG_REGULATOR_MODE_0, - .enable_bit = MC13783_REGCTRL_VRFDIG_EN, - }, - [MC13783_REGU_VRFREF] = { - .desc = { - .name = "REGU_VRFREF", - .ops = &mc13783_regulator_ops, - .type = REGULATOR_VOLTAGE, - .id = MC13783_REGU_VRFREF, - .owner = THIS_MODULE, - }, - .reg = MC13783_REG_REGULATOR_MODE_0, - .enable_bit = MC13783_REGCTRL_VRFREF_EN, - }, - [MC13783_REGU_VRFCP] = { - .desc = { - .name = "REGU_VRFCP", - .ops = &mc13783_regulator_ops, - .type = REGULATOR_VOLTAGE, - .id = MC13783_REGU_VRFCP, - .owner = THIS_MODULE, - }, - .reg = MC13783_REG_REGULATOR_MODE_0, - .enable_bit = MC13783_REGCTRL_VRFCP_EN, - }, - [MC13783_REGU_VSIM] = { - .desc = { - .name = "REGU_VSIM", - .ops = &mc13783_regulator_ops, - .type = REGULATOR_VOLTAGE, - .id = MC13783_REGU_VSIM, - .owner = THIS_MODULE, - }, - .reg = MC13783_REG_REGULATOR_MODE_1, - .enable_bit = MC13783_REGCTRL_VSIM_EN, - }, - [MC13783_REGU_VESIM] = { - .desc = { - .name = "REGU_VESIM", - .ops = &mc13783_regulator_ops, - .type = REGULATOR_VOLTAGE, - .id = MC13783_REGU_VESIM, - .owner = THIS_MODULE, - }, - .reg = MC13783_REG_REGULATOR_MODE_1, - .enable_bit = MC13783_REGCTRL_VESIM_EN, - }, - [MC13783_REGU_VCAM] = { - .desc = { - .name = "REGU_VCAM", - .ops = &mc13783_regulator_ops, - .type = REGULATOR_VOLTAGE, - .id = MC13783_REGU_VCAM, - .owner = THIS_MODULE, - }, - .reg = MC13783_REG_REGULATOR_MODE_1, - .enable_bit = MC13783_REGCTRL_VCAM_EN, - }, - [MC13783_REGU_VRFBG] = { - .desc = { - .name = "REGU_VRFBG", - .ops = &mc13783_regulator_ops, - .type = REGULATOR_VOLTAGE, - .id = MC13783_REGU_VRFBG, - .owner = THIS_MODULE, - }, - .reg = MC13783_REG_REGULATOR_MODE_1, - .enable_bit = MC13783_REGCTRL_VRFBG_EN, - }, - [MC13783_REGU_VVIB] = { - .desc = { - .name = "REGU_VVIB", - .ops = &mc13783_regulator_ops, - .type = REGULATOR_VOLTAGE, - .id = MC13783_REGU_VVIB, - .owner = THIS_MODULE, - }, - .reg = MC13783_REG_REGULATOR_MODE_1, - .enable_bit = MC13783_REGCTRL_VVIB_EN, - }, - [MC13783_REGU_VRF1] = { - .desc = { - .name = "REGU_VRF1", - .ops = &mc13783_regulator_ops, - .type = REGULATOR_VOLTAGE, - .id = MC13783_REGU_VRF1, - .owner = THIS_MODULE, - }, - .reg = MC13783_REG_REGULATOR_MODE_1, - .enable_bit = MC13783_REGCTRL_VRF1_EN, - }, - [MC13783_REGU_VRF2] = { - .desc = { - .name = "REGU_VRF2", - .ops = &mc13783_regulator_ops, - .type = REGULATOR_VOLTAGE, - .id = MC13783_REGU_VRF2, - .owner = THIS_MODULE, - }, - .reg = MC13783_REG_REGULATOR_MODE_1, - .enable_bit = MC13783_REGCTRL_VRF2_EN, - }, - [MC13783_REGU_VMMC1] = { - .desc = { - .name = "REGU_VMMC1", - .ops = &mc13783_regulator_ops, - .type = REGULATOR_VOLTAGE, - .id = MC13783_REGU_VMMC1, - .owner = THIS_MODULE, - }, - .reg = MC13783_REG_REGULATOR_MODE_1, - .enable_bit = MC13783_REGCTRL_VMMC1_EN, - }, - [MC13783_REGU_VMMC2] = { - .desc = { - .name = "REGU_VMMC2", - .ops = &mc13783_regulator_ops, - .type = REGULATOR_VOLTAGE, - .id = MC13783_REGU_VMMC2, - .owner = THIS_MODULE, - }, - .reg = MC13783_REG_REGULATOR_MODE_1, - .enable_bit = MC13783_REGCTRL_VMMC2_EN, - }, - [MC13783_REGU_GPO1] = { - .desc = { - .name = "REGU_GPO1", - .ops = &mc13783_regulator_ops, - .type = REGULATOR_VOLTAGE, - .id = MC13783_REGU_GPO1, - .owner = THIS_MODULE, - }, - .reg = MC13783_REG_POWER_MISCELLANEOUS, - .enable_bit = MC13783_REGCTRL_GPO1_EN, - }, - [MC13783_REGU_GPO2] = { - .desc = { - .name = "REGU_GPO2", - .ops = &mc13783_regulator_ops, - .type = REGULATOR_VOLTAGE, - .id = MC13783_REGU_GPO2, - .owner = THIS_MODULE, - }, - .reg = MC13783_REG_POWER_MISCELLANEOUS, - .enable_bit = MC13783_REGCTRL_GPO2_EN, - }, - [MC13783_REGU_GPO3] = { - .desc = { - .name = "REGU_GPO3", - .ops = &mc13783_regulator_ops, - .type = REGULATOR_VOLTAGE, - .id = MC13783_REGU_GPO3, - .owner = THIS_MODULE, - }, - .reg = MC13783_REG_POWER_MISCELLANEOUS, - .enable_bit = MC13783_REGCTRL_GPO3_EN, - }, - [MC13783_REGU_GPO4] = { - .desc = { - .name = "REGU_GPO4", - .ops = &mc13783_regulator_ops, - .type = REGULATOR_VOLTAGE, - .id = MC13783_REGU_GPO4, - .owner = THIS_MODULE, - }, - .reg = MC13783_REG_POWER_MISCELLANEOUS, - .enable_bit = MC13783_REGCTRL_GPO4_EN, - }, -}; - -struct mc13783_priv { - struct regulator_desc desc[ARRAY_SIZE(mc13783_regulators)]; - struct mc13783 *mc13783; - struct regulator_dev *regulators[0]; -}; - -static int mc13783_enable(struct regulator_dev *rdev) -{ - struct mc13783_priv *priv = rdev_get_drvdata(rdev); - int id = rdev_get_id(rdev); - - dev_dbg(rdev_get_dev(rdev), "%s id: %d\n", __func__, id); - - return mc13783_set_bits(priv->mc13783, mc13783_regulators[id].reg, - mc13783_regulators[id].enable_bit, - mc13783_regulators[id].enable_bit); -} - -static int mc13783_disable(struct regulator_dev *rdev) -{ - struct mc13783_priv *priv = rdev_get_drvdata(rdev); - int id = rdev_get_id(rdev); - - dev_dbg(rdev_get_dev(rdev), "%s id: %d\n", __func__, id); - - return mc13783_set_bits(priv->mc13783, mc13783_regulators[id].reg, - mc13783_regulators[id].enable_bit, 0); -} - -static int mc13783_is_enabled(struct regulator_dev *rdev) -{ - struct mc13783_priv *priv = rdev_get_drvdata(rdev); - int ret, id = rdev_get_id(rdev); - unsigned int val; - - ret = mc13783_reg_read(priv->mc13783, mc13783_regulators[id].reg, &val); - if (ret) - return ret; - - return (val & mc13783_regulators[id].enable_bit) != 0; -} - -static struct regulator_ops mc13783_regulator_ops = { - .enable = mc13783_enable, - .disable = mc13783_disable, - .is_enabled = mc13783_is_enabled, -}; - -static int __devinit mc13783_regulator_probe(struct platform_device *pdev) -{ - struct mc13783_priv *priv; - struct mc13783 *mc13783 = dev_get_drvdata(pdev->dev.parent); - struct mc13783_regulator_init_data *init_data; - int i, ret; - - dev_dbg(&pdev->dev, "mc13783_regulator_probe id %d\n", pdev->id); - - priv = kzalloc(sizeof(*priv) + mc13783->num_regulators * sizeof(void *), - GFP_KERNEL); - if (!priv) - return -ENOMEM; - - priv->mc13783 = mc13783; - - for (i = 0; i < mc13783->num_regulators; i++) { - init_data = &mc13783->regulators[i]; - priv->regulators[i] = regulator_register( - &mc13783_regulators[init_data->id].desc, - &pdev->dev, init_data->init_data, priv); - - if (IS_ERR(priv->regulators[i])) { - dev_err(&pdev->dev, "failed to register regulator %s\n", - mc13783_regulators[i].desc.name); - ret = PTR_ERR(priv->regulators[i]); - goto err; - } - } - - platform_set_drvdata(pdev, priv); - - return 0; -err: - while (--i >= 0) - regulator_unregister(priv->regulators[i]); - - kfree(priv); - - return ret; -} - -static int __devexit mc13783_regulator_remove(struct platform_device *pdev) -{ - struct mc13783_priv *priv = platform_get_drvdata(pdev); - struct mc13783 *mc13783 = priv->mc13783; - int i; - - for (i = 0; i < mc13783->num_regulators; i++) - regulator_unregister(priv->regulators[i]); - - return 0; -} - -static struct platform_driver mc13783_regulator_driver = { - .driver = { - .name = "mc13783-regulator", - .owner = THIS_MODULE, - }, - .remove = __devexit_p(mc13783_regulator_remove), -}; - -static int __init mc13783_regulator_init(void) -{ - return platform_driver_probe(&mc13783_regulator_driver, - mc13783_regulator_probe); -} -subsys_initcall(mc13783_regulator_init); - -static void __exit mc13783_regulator_exit(void) -{ - platform_driver_unregister(&mc13783_regulator_driver); -} -module_exit(mc13783_regulator_exit); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de"); -MODULE_DESCRIPTION("Regulator Driver for Freescale MC13783 PMIC"); -MODULE_ALIAS("platform:mc13783-regulator"); diff --git a/drivers/regulator/twl-regulator.c b/drivers/regulator/twl-regulator.c index 7ea1c3a31081..7e674859bd59 100644 --- a/drivers/regulator/twl-regulator.c +++ b/drivers/regulator/twl-regulator.c @@ -12,6 +12,7 @@ #include <linux/module.h> #include <linux/init.h> #include <linux/err.h> +#include <linux/delay.h> #include <linux/platform_device.h> #include <linux/regulator/driver.h> #include <linux/regulator/machine.h> @@ -40,6 +41,12 @@ struct twlreg_info { u8 table_len; const u16 *table; + /* regulator specific turn-on delay */ + u16 delay; + + /* State REMAP default configuration */ + u8 remap; + /* chip constraints on regulator behavior */ u16 min_mV; @@ -128,6 +135,7 @@ static int twlreg_enable(struct regulator_dev *rdev) { struct twlreg_info *info = rdev_get_drvdata(rdev); int grp; + int ret; grp = twlreg_read(info, TWL_MODULE_PM_RECEIVER, VREG_GRP); if (grp < 0) @@ -138,7 +146,11 @@ static int twlreg_enable(struct regulator_dev *rdev) else grp |= P1_GRP_6030; - return twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_GRP, grp); + ret = twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_GRP, grp); + + udelay(info->delay); + + return ret; } static int twlreg_disable(struct regulator_dev *rdev) @@ -151,9 +163,9 @@ static int twlreg_disable(struct regulator_dev *rdev) return grp; if (twl_class_is_4030()) - grp &= ~P1_GRP_4030; + grp &= ~(P1_GRP_4030 | P2_GRP_4030 | P3_GRP_4030); else - grp &= ~P1_GRP_6030; + grp &= ~(P1_GRP_6030 | P2_GRP_6030 | P3_GRP_6030); return twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_GRP, grp); } @@ -294,6 +306,18 @@ static const u16 VSIM_VSEL_table[] = { static const u16 VDAC_VSEL_table[] = { 1200, 1300, 1800, 1800, }; +static const u16 VDD1_VSEL_table[] = { + 800, 1450, +}; +static const u16 VDD2_VSEL_table[] = { + 800, 1450, 1500, +}; +static const u16 VIO_VSEL_table[] = { + 1800, 1850, +}; +static const u16 VINTANA2_VSEL_table[] = { + 2500, 2750, +}; static const u16 VAUX1_6030_VSEL_table[] = { 1000, 1300, 1800, 2500, 2800, 2900, 3000, 3000, @@ -414,20 +438,30 @@ static struct regulator_ops twlfixed_ops = { /*----------------------------------------------------------------------*/ -#define TWL4030_ADJUSTABLE_LDO(label, offset, num) \ - TWL_ADJUSTABLE_LDO(label, offset, num, TWL4030) -#define TWL4030_FIXED_LDO(label, offset, mVolts, num) \ - TWL_FIXED_LDO(label, offset, mVolts, num, TWL4030) -#define TWL6030_ADJUSTABLE_LDO(label, offset, num) \ - TWL_ADJUSTABLE_LDO(label, offset, num, TWL6030) -#define TWL6030_FIXED_LDO(label, offset, mVolts, num) \ - TWL_FIXED_LDO(label, offset, mVolts, num, TWL6030) - -#define TWL_ADJUSTABLE_LDO(label, offset, num, family) { \ +#define TWL4030_ADJUSTABLE_LDO(label, offset, num, turnon_delay, remap_conf) \ + TWL_ADJUSTABLE_LDO(label, offset, num, turnon_delay, \ + remap_conf, TWL4030) +#define TWL4030_FIXED_LDO(label, offset, mVolts, num, turnon_delay, \ + remap_conf) \ + TWL_FIXED_LDO(label, offset, mVolts, num, turnon_delay, \ + remap_conf, TWL4030) +#define TWL6030_ADJUSTABLE_LDO(label, offset, num, turnon_delay, \ + remap_conf) \ + TWL_ADJUSTABLE_LDO(label, offset, num, turnon_delay, \ + remap_conf, TWL6030) +#define TWL6030_FIXED_LDO(label, offset, mVolts, num, turnon_delay, \ + remap_conf) \ + TWL_FIXED_LDO(label, offset, mVolts, num, turnon_delay, \ + remap_conf, TWL6030) + +#define TWL_ADJUSTABLE_LDO(label, offset, num, turnon_delay, remap_conf, \ + family) { \ .base = offset, \ .id = num, \ .table_len = ARRAY_SIZE(label##_VSEL_table), \ .table = label##_VSEL_table, \ + .delay = turnon_delay, \ + .remap = remap_conf, \ .desc = { \ .name = #label, \ .id = family##_REG_##label, \ @@ -438,10 +472,13 @@ static struct regulator_ops twlfixed_ops = { }, \ } -#define TWL_FIXED_LDO(label, offset, mVolts, num, family) { \ +#define TWL_FIXED_LDO(label, offset, mVolts, num, turnon_delay, remap_conf, \ + family) { \ .base = offset, \ .id = num, \ .min_mV = mVolts, \ + .delay = turnon_delay, \ + .remap = remap_conf, \ .desc = { \ .name = #label, \ .id = family##_REG_##label, \ @@ -457,43 +494,41 @@ static struct regulator_ops twlfixed_ops = { * software control over them after boot. */ static struct twlreg_info twl_regs[] = { - TWL4030_ADJUSTABLE_LDO(VAUX1, 0x17, 1), - TWL4030_ADJUSTABLE_LDO(VAUX2_4030, 0x1b, 2), - TWL4030_ADJUSTABLE_LDO(VAUX2, 0x1b, 2), - TWL4030_ADJUSTABLE_LDO(VAUX3, 0x1f, 3), - TWL4030_ADJUSTABLE_LDO(VAUX4, 0x23, 4), - TWL4030_ADJUSTABLE_LDO(VMMC1, 0x27, 5), - TWL4030_ADJUSTABLE_LDO(VMMC2, 0x2b, 6), - /* - TWL4030_ADJUSTABLE_LDO(VPLL1, 0x2f, 7), - */ - TWL4030_ADJUSTABLE_LDO(VPLL2, 0x33, 8), - TWL4030_ADJUSTABLE_LDO(VSIM, 0x37, 9), - TWL4030_ADJUSTABLE_LDO(VDAC, 0x3b, 10), - /* - TWL4030_ADJUSTABLE_LDO(VINTANA1, 0x3f, 11), - TWL4030_ADJUSTABLE_LDO(VINTANA2, 0x43, 12), - TWL4030_ADJUSTABLE_LDO(VINTDIG, 0x47, 13), - TWL4030_SMPS(VIO, 0x4b, 14), - TWL4030_SMPS(VDD1, 0x55, 15), - TWL4030_SMPS(VDD2, 0x63, 16), - */ - TWL4030_FIXED_LDO(VUSB1V5, 0x71, 1500, 17), - TWL4030_FIXED_LDO(VUSB1V8, 0x74, 1800, 18), - TWL4030_FIXED_LDO(VUSB3V1, 0x77, 3100, 19), + TWL4030_ADJUSTABLE_LDO(VAUX1, 0x17, 1, 100, 0x08), + TWL4030_ADJUSTABLE_LDO(VAUX2_4030, 0x1b, 2, 100, 0x08), + TWL4030_ADJUSTABLE_LDO(VAUX2, 0x1b, 2, 100, 0x08), + TWL4030_ADJUSTABLE_LDO(VAUX3, 0x1f, 3, 100, 0x08), + TWL4030_ADJUSTABLE_LDO(VAUX4, 0x23, 4, 100, 0x08), + TWL4030_ADJUSTABLE_LDO(VMMC1, 0x27, 5, 100, 0x08), + TWL4030_ADJUSTABLE_LDO(VMMC2, 0x2b, 6, 100, 0x08), + TWL4030_ADJUSTABLE_LDO(VPLL1, 0x2f, 7, 100, 0x00), + TWL4030_ADJUSTABLE_LDO(VPLL2, 0x33, 8, 100, 0x08), + TWL4030_ADJUSTABLE_LDO(VSIM, 0x37, 9, 100, 0x00), + TWL4030_ADJUSTABLE_LDO(VDAC, 0x3b, 10, 100, 0x08), + TWL4030_FIXED_LDO(VINTANA1, 0x3f, 1500, 11, 100, 0x08), + TWL4030_ADJUSTABLE_LDO(VINTANA2, 0x43, 12, 100, 0x08), + TWL4030_FIXED_LDO(VINTDIG, 0x47, 1500, 13, 100, 0x08), + TWL4030_ADJUSTABLE_LDO(VIO, 0x4b, 14, 1000, 0x08), + TWL4030_ADJUSTABLE_LDO(VDD1, 0x55, 15, 1000, 0x08), + TWL4030_ADJUSTABLE_LDO(VDD2, 0x63, 16, 1000, 0x08), + TWL4030_FIXED_LDO(VUSB1V5, 0x71, 1500, 17, 100, 0x08), + TWL4030_FIXED_LDO(VUSB1V8, 0x74, 1800, 18, 100, 0x08), + TWL4030_FIXED_LDO(VUSB3V1, 0x77, 3100, 19, 150, 0x08), /* VUSBCP is managed *only* by the USB subchip */ /* 6030 REG with base as PMC Slave Misc : 0x0030 */ - TWL6030_ADJUSTABLE_LDO(VAUX1_6030, 0x54, 1), - TWL6030_ADJUSTABLE_LDO(VAUX2_6030, 0x58, 2), - TWL6030_ADJUSTABLE_LDO(VAUX3_6030, 0x5c, 3), - TWL6030_ADJUSTABLE_LDO(VMMC, 0x68, 4), - TWL6030_ADJUSTABLE_LDO(VPP, 0x6c, 5), - TWL6030_ADJUSTABLE_LDO(VUSIM, 0x74, 7), - TWL6030_FIXED_LDO(VANA, 0x50, 2100, 15), - TWL6030_FIXED_LDO(VCXIO, 0x60, 1800, 16), - TWL6030_FIXED_LDO(VDAC, 0x64, 1800, 17), - TWL6030_FIXED_LDO(VUSB, 0x70, 3300, 18) + /* Turnon-delay and remap configuration values for 6030 are not + verified since the specification is not public */ + TWL6030_ADJUSTABLE_LDO(VAUX1_6030, 0x54, 1, 0, 0x08), + TWL6030_ADJUSTABLE_LDO(VAUX2_6030, 0x58, 2, 0, 0x08), + TWL6030_ADJUSTABLE_LDO(VAUX3_6030, 0x5c, 3, 0, 0x08), + TWL6030_ADJUSTABLE_LDO(VMMC, 0x68, 4, 0, 0x08), + TWL6030_ADJUSTABLE_LDO(VPP, 0x6c, 5, 0, 0x08), + TWL6030_ADJUSTABLE_LDO(VUSIM, 0x74, 7, 0, 0x08), + TWL6030_FIXED_LDO(VANA, 0x50, 2100, 15, 0, 0x08), + TWL6030_FIXED_LDO(VCXIO, 0x60, 1800, 16, 0, 0x08), + TWL6030_FIXED_LDO(VDAC, 0x64, 1800, 17, 0, 0x08), + TWL6030_FIXED_LDO(VUSB, 0x70, 3300, 18, 0, 0x08) }; static int twlreg_probe(struct platform_device *pdev) @@ -525,6 +560,19 @@ static int twlreg_probe(struct platform_device *pdev) c->valid_ops_mask &= REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS; + switch (pdev->id) { + case TWL4030_REG_VIO: + case TWL4030_REG_VDD1: + case TWL4030_REG_VDD2: + case TWL4030_REG_VPLL1: + case TWL4030_REG_VINTANA1: + case TWL4030_REG_VINTANA2: + case TWL4030_REG_VINTDIG: + c->always_on = true; + break; + default: + break; + } rdev = regulator_register(&info->desc, &pdev->dev, initdata, info); if (IS_ERR(rdev)) { @@ -534,6 +582,9 @@ static int twlreg_probe(struct platform_device *pdev) } platform_set_drvdata(pdev, rdev); + twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_REMAP, + info->remap); + /* NOTE: many regulators support short-circuit IRQs (presentable * as REGULATOR_OVER_CURRENT notifications?) configured via: * - SC_CONFIG diff --git a/drivers/regulator/wm831x-dcdc.c b/drivers/regulator/wm831x-dcdc.c index 2eefc1a0cf08..0a6577577e8d 100644 --- a/drivers/regulator/wm831x-dcdc.c +++ b/drivers/regulator/wm831x-dcdc.c @@ -19,6 +19,8 @@ #include <linux/i2c.h> #include <linux/platform_device.h> #include <linux/regulator/driver.h> +#include <linux/regulator/machine.h> +#include <linux/gpio.h> #include <linux/mfd/wm831x/core.h> #include <linux/mfd/wm831x/regulator.h> @@ -39,6 +41,7 @@ #define WM831X_DCDC_CONTROL_2 1 #define WM831X_DCDC_ON_CONFIG 2 #define WM831X_DCDC_SLEEP_CONTROL 3 +#define WM831X_DCDC_DVS_CONTROL 4 /* * Shared @@ -50,6 +53,10 @@ struct wm831x_dcdc { int base; struct wm831x *wm831x; struct regulator_dev *regulator; + int dvs_gpio; + int dvs_gpio_state; + int on_vsel; + int dvs_vsel; }; static int wm831x_dcdc_is_enabled(struct regulator_dev *rdev) @@ -240,11 +247,9 @@ static int wm831x_buckv_list_voltage(struct regulator_dev *rdev, return -EINVAL; } -static int wm831x_buckv_set_voltage_int(struct regulator_dev *rdev, int reg, - int min_uV, int max_uV) +static int wm831x_buckv_select_min_voltage(struct regulator_dev *rdev, + int min_uV, int max_uV) { - struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev); - struct wm831x *wm831x = dcdc->wm831x; u16 vsel; if (min_uV < 600000) @@ -257,39 +262,126 @@ static int wm831x_buckv_set_voltage_int(struct regulator_dev *rdev, int reg, if (wm831x_buckv_list_voltage(rdev, vsel) > max_uV) return -EINVAL; - return wm831x_set_bits(wm831x, reg, WM831X_DC1_ON_VSEL_MASK, vsel); + return vsel; +} + +static int wm831x_buckv_select_max_voltage(struct regulator_dev *rdev, + int min_uV, int max_uV) +{ + u16 vsel; + + if (max_uV < 600000 || max_uV > 1800000) + return -EINVAL; + + vsel = ((max_uV - 600000) / 12500) + 8; + + if (wm831x_buckv_list_voltage(rdev, vsel) < min_uV || + wm831x_buckv_list_voltage(rdev, vsel) < max_uV) + return -EINVAL; + + return vsel; +} + +static int wm831x_buckv_set_dvs(struct regulator_dev *rdev, int state) +{ + struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev); + + if (state == dcdc->dvs_gpio_state) + return 0; + + dcdc->dvs_gpio_state = state; + gpio_set_value(dcdc->dvs_gpio, state); + + /* Should wait for DVS state change to be asserted if we have + * a GPIO for it, for now assume the device is configured + * for the fastest possible transition. + */ + + return 0; } static int wm831x_buckv_set_voltage(struct regulator_dev *rdev, - int min_uV, int max_uV) + int min_uV, int max_uV) { struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev); - u16 reg = dcdc->base + WM831X_DCDC_ON_CONFIG; + struct wm831x *wm831x = dcdc->wm831x; + int on_reg = dcdc->base + WM831X_DCDC_ON_CONFIG; + int dvs_reg = dcdc->base + WM831X_DCDC_DVS_CONTROL; + int vsel, ret; + + vsel = wm831x_buckv_select_min_voltage(rdev, min_uV, max_uV); + if (vsel < 0) + return vsel; + + /* If this value is already set then do a GPIO update if we can */ + if (dcdc->dvs_gpio && dcdc->on_vsel == vsel) + return wm831x_buckv_set_dvs(rdev, 0); + + if (dcdc->dvs_gpio && dcdc->dvs_vsel == vsel) + return wm831x_buckv_set_dvs(rdev, 1); + + /* Always set the ON status to the minimum voltage */ + ret = wm831x_set_bits(wm831x, on_reg, WM831X_DC1_ON_VSEL_MASK, vsel); + if (ret < 0) + return ret; + dcdc->on_vsel = vsel; + + if (!dcdc->dvs_gpio) + return ret; + + /* Kick the voltage transition now */ + ret = wm831x_buckv_set_dvs(rdev, 0); + if (ret < 0) + return ret; + + /* Set the high voltage as the DVS voltage. This is optimised + * for CPUfreq usage, most processors will keep the maximum + * voltage constant and lower the minimum with the frequency. */ + vsel = wm831x_buckv_select_max_voltage(rdev, min_uV, max_uV); + if (vsel < 0) { + /* This should never happen - at worst the same vsel + * should be chosen */ + WARN_ON(vsel < 0); + return 0; + } + + /* Don't bother if it's the same VSEL we're already using */ + if (vsel == dcdc->on_vsel) + return 0; - return wm831x_buckv_set_voltage_int(rdev, reg, min_uV, max_uV); + ret = wm831x_set_bits(wm831x, dvs_reg, WM831X_DC1_DVS_VSEL_MASK, vsel); + if (ret == 0) + dcdc->dvs_vsel = vsel; + else + dev_warn(wm831x->dev, "Failed to set DCDC DVS VSEL: %d\n", + ret); + + return 0; } static int wm831x_buckv_set_suspend_voltage(struct regulator_dev *rdev, - int uV) + int uV) { struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev); + struct wm831x *wm831x = dcdc->wm831x; u16 reg = dcdc->base + WM831X_DCDC_SLEEP_CONTROL; + int vsel; + + vsel = wm831x_buckv_select_min_voltage(rdev, uV, uV); + if (vsel < 0) + return vsel; - return wm831x_buckv_set_voltage_int(rdev, reg, uV, uV); + return wm831x_set_bits(wm831x, reg, WM831X_DC1_SLP_VSEL_MASK, vsel); } static int wm831x_buckv_get_voltage(struct regulator_dev *rdev) { struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev); - struct wm831x *wm831x = dcdc->wm831x; - u16 reg = dcdc->base + WM831X_DCDC_ON_CONFIG; - int val; - val = wm831x_reg_read(wm831x, reg); - if (val < 0) - return val; - - return wm831x_buckv_list_voltage(rdev, val & WM831X_DC1_ON_VSEL_MASK); + if (dcdc->dvs_gpio && dcdc->dvs_gpio_state) + return wm831x_buckv_list_voltage(rdev, dcdc->dvs_vsel); + else + return wm831x_buckv_list_voltage(rdev, dcdc->on_vsel); } /* Current limit options */ @@ -346,6 +438,64 @@ static struct regulator_ops wm831x_buckv_ops = { .set_suspend_mode = wm831x_dcdc_set_suspend_mode, }; +/* + * Set up DVS control. We just log errors since we can still run + * (with reduced performance) if we fail. + */ +static __devinit void wm831x_buckv_dvs_init(struct wm831x_dcdc *dcdc, + struct wm831x_buckv_pdata *pdata) +{ + struct wm831x *wm831x = dcdc->wm831x; + int ret; + u16 ctrl; + + if (!pdata || !pdata->dvs_gpio) + return; + + switch (pdata->dvs_control_src) { + case 1: + ctrl = 2 << WM831X_DC1_DVS_SRC_SHIFT; + break; + case 2: + ctrl = 3 << WM831X_DC1_DVS_SRC_SHIFT; + break; + default: + dev_err(wm831x->dev, "Invalid DVS control source %d for %s\n", + pdata->dvs_control_src, dcdc->name); + return; + } + + ret = wm831x_set_bits(wm831x, dcdc->base + WM831X_DCDC_DVS_CONTROL, + WM831X_DC1_DVS_SRC_MASK, ctrl); + if (ret < 0) { + dev_err(wm831x->dev, "Failed to set %s DVS source: %d\n", + dcdc->name, ret); + return; + } + + ret = gpio_request(pdata->dvs_gpio, "DCDC DVS"); + if (ret < 0) { + dev_err(wm831x->dev, "Failed to get %s DVS GPIO: %d\n", + dcdc->name, ret); + return; + } + + /* gpiolib won't let us read the GPIO status so pick the higher + * of the two existing voltages so we take it as platform data. + */ + dcdc->dvs_gpio_state = pdata->dvs_init_state; + + ret = gpio_direction_output(pdata->dvs_gpio, dcdc->dvs_gpio_state); + if (ret < 0) { + dev_err(wm831x->dev, "Failed to enable %s DVS GPIO: %d\n", + dcdc->name, ret); + gpio_free(pdata->dvs_gpio); + return; + } + + dcdc->dvs_gpio = pdata->dvs_gpio; +} + static __devinit int wm831x_buckv_probe(struct platform_device *pdev) { struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent); @@ -384,6 +534,23 @@ static __devinit int wm831x_buckv_probe(struct platform_device *pdev) dcdc->desc.ops = &wm831x_buckv_ops; dcdc->desc.owner = THIS_MODULE; + ret = wm831x_reg_read(wm831x, dcdc->base + WM831X_DCDC_ON_CONFIG); + if (ret < 0) { + dev_err(wm831x->dev, "Failed to read ON VSEL: %d\n", ret); + goto err; + } + dcdc->on_vsel = ret & WM831X_DC1_ON_VSEL_MASK; + + ret = wm831x_reg_read(wm831x, dcdc->base + WM831X_DCDC_ON_CONFIG); + if (ret < 0) { + dev_err(wm831x->dev, "Failed to read DVS VSEL: %d\n", ret); + goto err; + } + dcdc->dvs_vsel = ret & WM831X_DC1_DVS_VSEL_MASK; + + if (pdata->dcdc[id]) + wm831x_buckv_dvs_init(dcdc, pdata->dcdc[id]->driver_data); + dcdc->regulator = regulator_register(&dcdc->desc, &pdev->dev, pdata->dcdc[id], dcdc); if (IS_ERR(dcdc->regulator)) { @@ -422,6 +589,8 @@ err_uv: err_regulator: regulator_unregister(dcdc->regulator); err: + if (dcdc->dvs_gpio) + gpio_free(dcdc->dvs_gpio); kfree(dcdc); return ret; } @@ -434,6 +603,8 @@ static __devexit int wm831x_buckv_remove(struct platform_device *pdev) wm831x_free_irq(wm831x, platform_get_irq_byname(pdev, "HC"), dcdc); wm831x_free_irq(wm831x, platform_get_irq_byname(pdev, "UV"), dcdc); regulator_unregister(dcdc->regulator); + if (dcdc->dvs_gpio) + gpio_free(dcdc->dvs_gpio); kfree(dcdc); return 0; diff --git a/drivers/regulator/wm831x-ldo.c b/drivers/regulator/wm831x-ldo.c index 902db56ce099..61e02ac2fda3 100644 --- a/drivers/regulator/wm831x-ldo.c +++ b/drivers/regulator/wm831x-ldo.c @@ -470,7 +470,7 @@ static unsigned int wm831x_aldo_get_mode(struct regulator_dev *rdev) struct wm831x_ldo *ldo = rdev_get_drvdata(rdev); struct wm831x *wm831x = ldo->wm831x; int on_reg = ldo->base + WM831X_LDO_ON_CONTROL; - unsigned int ret; + int ret; ret = wm831x_reg_read(wm831x, on_reg); if (ret < 0) diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c index eb154dc57164..c8c12325e69b 100644 --- a/drivers/rtc/rtc-cmos.c +++ b/drivers/rtc/rtc-cmos.c @@ -686,7 +686,8 @@ cmos_do_probe(struct device *dev, struct resource *ports, int rtc_irq) */ #if defined(CONFIG_ATARI) address_space = 64; -#elif defined(__i386__) || defined(__x86_64__) || defined(__arm__) || defined(__sparc__) +#elif defined(__i386__) || defined(__x86_64__) || defined(__arm__) \ + || defined(__sparc__) || defined(__mips__) address_space = 128; #else #warning Assuming 128 bytes of RTC+NVRAM address space, not 64 bytes. diff --git a/drivers/rtc/rtc-ds1305.c b/drivers/rtc/rtc-ds1305.c index 259db7f3535b..9630e7d3314e 100644 --- a/drivers/rtc/rtc-ds1305.c +++ b/drivers/rtc/rtc-ds1305.c @@ -778,6 +778,8 @@ static int __devinit ds1305_probe(struct spi_device *spi) spi->irq, status); goto fail1; } + + device_set_wakeup_capable(&spi->dev, 1); } /* export NVRAM */ diff --git a/drivers/rtc/rtc-ds1307.c b/drivers/rtc/rtc-ds1307.c index 8a99da6f2f24..c4ec5c158aa1 100644 --- a/drivers/rtc/rtc-ds1307.c +++ b/drivers/rtc/rtc-ds1307.c @@ -881,6 +881,8 @@ read_rtc: "unable to request IRQ!\n"); goto exit_irq; } + + device_set_wakeup_capable(&client->dev, 1); set_bit(HAS_ALARM, &ds1307->flags); dev_dbg(&client->dev, "got IRQ %d\n", client->irq); } diff --git a/drivers/rtc/rtc-ds1374.c b/drivers/rtc/rtc-ds1374.c index 713f7bf5afb3..5317bbcbc7a0 100644 --- a/drivers/rtc/rtc-ds1374.c +++ b/drivers/rtc/rtc-ds1374.c @@ -383,6 +383,8 @@ static int ds1374_probe(struct i2c_client *client, dev_err(&client->dev, "unable to request IRQ\n"); goto out_free; } + + device_set_wakeup_capable(&client->dev, 1); } ds1374->rtc = rtc_device_register(client->name, &client->dev, diff --git a/drivers/s390/block/dasd_alias.c b/drivers/s390/block/dasd_alias.c index fd1231738ef4..148b1dd24070 100644 --- a/drivers/s390/block/dasd_alias.c +++ b/drivers/s390/block/dasd_alias.c @@ -218,7 +218,7 @@ int dasd_alias_make_device_known_to_lcu(struct dasd_device *device) spin_unlock_irqrestore(&aliastree.lock, flags); newlcu = _allocate_lcu(uid); if (IS_ERR(newlcu)) - return PTR_ERR(lcu); + return PTR_ERR(newlcu); spin_lock_irqsave(&aliastree.lock, flags); lcu = _find_lcu(server, uid); if (!lcu) { diff --git a/drivers/s390/block/dasd_diag.c b/drivers/s390/block/dasd_diag.c index f64d0db881b4..6e14863f5c70 100644 --- a/drivers/s390/block/dasd_diag.c +++ b/drivers/s390/block/dasd_diag.c @@ -8,7 +8,7 @@ * */ -#define KMSG_COMPONENT "dasd-diag" +#define KMSG_COMPONENT "dasd" #include <linux/stddef.h> #include <linux/kernel.h> @@ -146,16 +146,16 @@ dasd_diag_erp(struct dasd_device *device) rc = mdsk_init_io(device, device->block->bp_block, 0, NULL); if (rc == 4) { if (!(device->features & DASD_FEATURE_READONLY)) { - dev_warn(&device->cdev->dev, - "The access mode of a DIAG device changed" - " to read-only"); + pr_warning("%s: The access mode of a DIAG device " + "changed to read-only\n", + dev_name(&device->cdev->dev)); device->features |= DASD_FEATURE_READONLY; } rc = 0; } if (rc) - dev_warn(&device->cdev->dev, "DIAG ERP failed with " - "rc=%d\n", rc); + pr_warning("%s: DIAG ERP failed with " + "rc=%d\n", dev_name(&device->cdev->dev), rc); } /* Start a given request at the device. Return zero on success, non-zero @@ -371,8 +371,9 @@ dasd_diag_check_device(struct dasd_device *device) private->pt_block = 2; break; default: - dev_warn(&device->cdev->dev, "Device type %d is not supported " - "in DIAG mode\n", private->rdc_data.vdev_class); + pr_warning("%s: Device type %d is not supported " + "in DIAG mode\n", dev_name(&device->cdev->dev), + private->rdc_data.vdev_class); rc = -EOPNOTSUPP; goto out; } @@ -413,8 +414,8 @@ dasd_diag_check_device(struct dasd_device *device) private->iob.flaga = DASD_DIAG_FLAGA_DEFAULT; rc = dia250(&private->iob, RW_BIO); if (rc == 3) { - dev_warn(&device->cdev->dev, - "A 64-bit DIAG call failed\n"); + pr_warning("%s: A 64-bit DIAG call failed\n", + dev_name(&device->cdev->dev)); rc = -EOPNOTSUPP; goto out_label; } @@ -423,8 +424,9 @@ dasd_diag_check_device(struct dasd_device *device) break; } if (bsize > PAGE_SIZE) { - dev_warn(&device->cdev->dev, "Accessing the DASD failed because" - " of an incorrect format (rc=%d)\n", rc); + pr_warning("%s: Accessing the DASD failed because of an " + "incorrect format (rc=%d)\n", + dev_name(&device->cdev->dev), rc); rc = -EIO; goto out_label; } @@ -442,18 +444,18 @@ dasd_diag_check_device(struct dasd_device *device) block->s2b_shift++; rc = mdsk_init_io(device, block->bp_block, 0, NULL); if (rc && (rc != 4)) { - dev_warn(&device->cdev->dev, "DIAG initialization " - "failed with rc=%d\n", rc); + pr_warning("%s: DIAG initialization failed with rc=%d\n", + dev_name(&device->cdev->dev), rc); rc = -EIO; } else { if (rc == 4) device->features |= DASD_FEATURE_READONLY; - dev_info(&device->cdev->dev, - "New DASD with %ld byte/block, total size %ld KB%s\n", - (unsigned long) block->bp_block, - (unsigned long) (block->blocks << - block->s2b_shift) >> 1, - (rc == 4) ? ", read-only device" : ""); + pr_info("%s: New DASD with %ld byte/block, total size %ld " + "KB%s\n", dev_name(&device->cdev->dev), + (unsigned long) block->bp_block, + (unsigned long) (block->blocks << + block->s2b_shift) >> 1, + (rc == 4) ? ", read-only device" : ""); rc = 0; } out_label: diff --git a/drivers/s390/char/fs3270.c b/drivers/s390/char/fs3270.c index 28e4649fa9e4..247b2b934728 100644 --- a/drivers/s390/char/fs3270.c +++ b/drivers/s390/char/fs3270.c @@ -467,7 +467,7 @@ fs3270_open(struct inode *inode, struct file *filp) if (IS_ERR(ib)) { raw3270_put_view(&fp->view); raw3270_del_view(&fp->view); - rc = PTR_ERR(fp); + rc = PTR_ERR(ib); goto out; } fp->rdbuf = ib; diff --git a/drivers/s390/char/tape_34xx.c b/drivers/s390/char/tape_34xx.c index 3657fe103c27..cb70fa1cf539 100644 --- a/drivers/s390/char/tape_34xx.c +++ b/drivers/s390/char/tape_34xx.c @@ -9,6 +9,7 @@ */ #define KMSG_COMPONENT "tape_34xx" +#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt #include <linux/module.h> #include <linux/init.h> diff --git a/drivers/s390/char/tape_3590.c b/drivers/s390/char/tape_3590.c index 0c72aadb8391..9821c5886613 100644 --- a/drivers/s390/char/tape_3590.c +++ b/drivers/s390/char/tape_3590.c @@ -9,6 +9,7 @@ */ #define KMSG_COMPONENT "tape_3590" +#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt #include <linux/module.h> #include <linux/init.h> @@ -136,7 +137,7 @@ static void int_to_ext_kekl(struct tape3592_kekl *in, out->type_on_tape = TAPE390_KEKL_TYPE_LABEL; memcpy(out->label, in->label, sizeof(in->label)); EBCASC(out->label, sizeof(in->label)); - strstrip(out->label); + strim(out->label); } static void int_to_ext_kekl_pair(struct tape3592_kekl_pair *in, diff --git a/drivers/s390/char/tape_block.c b/drivers/s390/char/tape_block.c index 4799cc2f73c3..96816149368a 100644 --- a/drivers/s390/char/tape_block.c +++ b/drivers/s390/char/tape_block.c @@ -11,6 +11,7 @@ */ #define KMSG_COMPONENT "tape" +#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt #include <linux/fs.h> #include <linux/module.h> diff --git a/drivers/s390/char/tape_char.c b/drivers/s390/char/tape_char.c index 23d773a0d113..2125ec7d95f0 100644 --- a/drivers/s390/char/tape_char.c +++ b/drivers/s390/char/tape_char.c @@ -10,6 +10,9 @@ * Martin Schwidefsky <schwidefsky@de.ibm.com> */ +#define KMSG_COMPONENT "tape" +#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt + #include <linux/module.h> #include <linux/types.h> #include <linux/proc_fs.h> diff --git a/drivers/s390/char/tape_class.c b/drivers/s390/char/tape_class.c index ddc914ccea8f..b2864e3edb6d 100644 --- a/drivers/s390/char/tape_class.c +++ b/drivers/s390/char/tape_class.c @@ -7,6 +7,10 @@ * Author: Stefan Bader <shbader@de.ibm.com> * Based on simple class device code by Greg K-H */ + +#define KMSG_COMPONENT "tape" +#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt + #include "tape_class.h" MODULE_AUTHOR("Stefan Bader <shbader@de.ibm.com>"); diff --git a/drivers/s390/char/tape_core.c b/drivers/s390/char/tape_core.c index f5d6802dc5da..81b094e480e6 100644 --- a/drivers/s390/char/tape_core.c +++ b/drivers/s390/char/tape_core.c @@ -12,6 +12,8 @@ */ #define KMSG_COMPONENT "tape" +#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt + #include <linux/module.h> #include <linux/init.h> // for kernel parameters #include <linux/kmod.h> // for requesting modules diff --git a/drivers/s390/char/tape_proc.c b/drivers/s390/char/tape_proc.c index ebd820ccfb24..0ceb37984f77 100644 --- a/drivers/s390/char/tape_proc.c +++ b/drivers/s390/char/tape_proc.c @@ -11,6 +11,9 @@ * PROCFS Functions */ +#define KMSG_COMPONENT "tape" +#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt + #include <linux/module.h> #include <linux/vmalloc.h> #include <linux/seq_file.h> diff --git a/drivers/s390/char/tape_std.c b/drivers/s390/char/tape_std.c index 750354ad16e5..03f07e5dd6e9 100644 --- a/drivers/s390/char/tape_std.c +++ b/drivers/s390/char/tape_std.c @@ -11,6 +11,9 @@ * Stefan Bader <shbader@de.ibm.com> */ +#define KMSG_COMPONENT "tape" +#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt + #include <linux/stddef.h> #include <linux/kernel.h> #include <linux/bio.h> diff --git a/drivers/s390/cio/ccwreq.c b/drivers/s390/cio/ccwreq.c index 9509e3860934..7a28a3029a3f 100644 --- a/drivers/s390/cio/ccwreq.c +++ b/drivers/s390/cio/ccwreq.c @@ -49,7 +49,6 @@ static u16 ccwreq_next_path(struct ccw_device *cdev) */ static void ccwreq_stop(struct ccw_device *cdev, int rc) { - struct subchannel *sch = to_subchannel(cdev->dev.parent); struct ccw_request *req = &cdev->private->req; if (req->done) @@ -57,7 +56,6 @@ static void ccwreq_stop(struct ccw_device *cdev, int rc) req->done = 1; ccw_device_set_timeout(cdev, 0); memset(&cdev->private->irb, 0, sizeof(struct irb)); - sch->lpm = sch->schib.pmcw.pam; if (rc && rc != -ENODEV && req->drc) rc = req->drc; req->callback(cdev, req->data, rc); @@ -80,7 +78,6 @@ static void ccwreq_do(struct ccw_device *cdev) continue; } /* Perform start function. */ - sch->lpm = 0xff; memset(&cdev->private->irb, 0, sizeof(struct irb)); rc = cio_start(sch, cp, (u8) req->mask); if (rc == 0) { diff --git a/drivers/s390/cio/device.c b/drivers/s390/cio/device.c index 73901c9e260f..a6c7d5426fb2 100644 --- a/drivers/s390/cio/device.c +++ b/drivers/s390/cio/device.c @@ -1519,6 +1519,7 @@ static int ccw_device_console_enable(struct ccw_device *cdev, sch->driver = &io_subchannel_driver; /* Initialize the ccw_device structure. */ cdev->dev.parent= &sch->dev; + sch_set_cdev(sch, cdev); io_subchannel_recog(cdev, sch); /* Now wait for the async. recognition to come to an end. */ spin_lock_irq(cdev->ccwlock); diff --git a/drivers/s390/cio/device_pgid.c b/drivers/s390/cio/device_pgid.c index aad188e43b4f..6facb5499a65 100644 --- a/drivers/s390/cio/device_pgid.c +++ b/drivers/s390/cio/device_pgid.c @@ -142,7 +142,7 @@ static void spid_do(struct ccw_device *cdev) u8 fn; /* Use next available path that is not already in correct state. */ - req->lpm = lpm_adjust(req->lpm, sch->schib.pmcw.pam & ~sch->vpm); + req->lpm = lpm_adjust(req->lpm, cdev->private->pgid_todo_mask); if (!req->lpm) goto out_nopath; /* Channel program setup. */ @@ -254,15 +254,15 @@ static void pgid_analyze(struct ccw_device *cdev, struct pgid **p, *p = first; } -static u8 pgid_to_vpm(struct ccw_device *cdev) +static u8 pgid_to_donepm(struct ccw_device *cdev) { struct subchannel *sch = to_subchannel(cdev->dev.parent); struct pgid *pgid; int i; int lpm; - u8 vpm = 0; + u8 donepm = 0; - /* Set VPM bits for paths which are already in the target state. */ + /* Set bits for paths which are already in the target state. */ for (i = 0; i < 8; i++) { lpm = 0x80 >> i; if ((cdev->private->pgid_valid_mask & lpm) == 0) @@ -282,10 +282,10 @@ static u8 pgid_to_vpm(struct ccw_device *cdev) if (pgid->inf.ps.state3 != SNID_STATE3_SINGLE_PATH) continue; } - vpm |= lpm; + donepm |= lpm; } - return vpm; + return donepm; } static void pgid_fill(struct ccw_device *cdev, struct pgid *pgid) @@ -307,6 +307,7 @@ static void snid_done(struct ccw_device *cdev, int rc) int mismatch = 0; int reserved = 0; int reset = 0; + u8 donepm; if (rc) goto out; @@ -316,18 +317,20 @@ static void snid_done(struct ccw_device *cdev, int rc) else if (mismatch) rc = -EOPNOTSUPP; else { - sch->vpm = pgid_to_vpm(cdev); + donepm = pgid_to_donepm(cdev); + sch->vpm = donepm & sch->opm; + cdev->private->pgid_todo_mask &= ~donepm; pgid_fill(cdev, pgid); } out: CIO_MSG_EVENT(2, "snid: device 0.%x.%04x: rc=%d pvm=%02x vpm=%02x " - "mism=%d rsvd=%d reset=%d\n", id->ssid, id->devno, rc, - cdev->private->pgid_valid_mask, sch->vpm, mismatch, - reserved, reset); + "todo=%02x mism=%d rsvd=%d reset=%d\n", id->ssid, + id->devno, rc, cdev->private->pgid_valid_mask, sch->vpm, + cdev->private->pgid_todo_mask, mismatch, reserved, reset); switch (rc) { case 0: /* Anything left to do? */ - if (sch->vpm == sch->schib.pmcw.pam) { + if (cdev->private->pgid_todo_mask == 0) { verify_done(cdev, sch->vpm == 0 ? -EACCES : 0); return; } @@ -411,6 +414,7 @@ static void verify_start(struct ccw_device *cdev) struct ccw_dev_id *devid = &cdev->private->dev_id; sch->vpm = 0; + sch->lpm = sch->schib.pmcw.pam; /* Initialize request data. */ memset(req, 0, sizeof(*req)); req->timeout = PGID_TIMEOUT; @@ -442,11 +446,14 @@ static void verify_start(struct ccw_device *cdev) */ void ccw_device_verify_start(struct ccw_device *cdev) { + struct subchannel *sch = to_subchannel(cdev->dev.parent); + CIO_TRACE_EVENT(4, "vrfy"); CIO_HEX_EVENT(4, &cdev->private->dev_id, sizeof(cdev->private->dev_id)); /* Initialize PGID data. */ memset(cdev->private->pgid, 0, sizeof(cdev->private->pgid)); cdev->private->pgid_valid_mask = 0; + cdev->private->pgid_todo_mask = sch->schib.pmcw.pam; /* * Initialize pathgroup and multipath state with target values. * They may change in the course of path verification. diff --git a/drivers/s390/cio/fcx.c b/drivers/s390/cio/fcx.c index 61677dfbdc9b..ca5e9bb9d458 100644 --- a/drivers/s390/cio/fcx.c +++ b/drivers/s390/cio/fcx.c @@ -163,7 +163,7 @@ void tcw_finalize(struct tcw *tcw, int num_tidaws) /* Add tcat to tccb. */ tccb = tcw_get_tccb(tcw); tcat = (struct tccb_tcat *) &tccb->tca[tca_size(tccb)]; - memset(tcat, 0, sizeof(tcat)); + memset(tcat, 0, sizeof(*tcat)); /* Calculate tcw input/output count and tcat transport count. */ count = calc_dcw_count(tccb); if (tcw->w && (tcw->flags & TCW_FLAGS_OUTPUT_TIDA)) @@ -269,7 +269,7 @@ EXPORT_SYMBOL(tccb_init); */ void tsb_init(struct tsb *tsb) { - memset(tsb, 0, sizeof(tsb)); + memset(tsb, 0, sizeof(*tsb)); } EXPORT_SYMBOL(tsb_init); diff --git a/drivers/s390/cio/io_sch.h b/drivers/s390/cio/io_sch.h index d72ae4c93af9..b9ce712a7f25 100644 --- a/drivers/s390/cio/io_sch.h +++ b/drivers/s390/cio/io_sch.h @@ -150,6 +150,7 @@ struct ccw_device_private { struct ccw_request req; /* internal I/O request */ int iretry; u8 pgid_valid_mask; /* mask of valid PGIDs */ + u8 pgid_todo_mask; /* mask of PGIDs to be adjusted */ struct { unsigned int fast:1; /* post with "channel end" */ unsigned int repall:1; /* report every interrupt status */ diff --git a/drivers/s390/cio/qdio_main.c b/drivers/s390/cio/qdio_main.c index 4be6e84b9599..b2275c5000e7 100644 --- a/drivers/s390/cio/qdio_main.c +++ b/drivers/s390/cio/qdio_main.c @@ -486,7 +486,8 @@ static int get_inbound_buffer_frontier(struct qdio_q *q) case SLSB_P_INPUT_PRIMED: inbound_primed(q, count); q->first_to_check = add_buf(q->first_to_check, count); - atomic_sub(count, &q->nr_buf_used); + if (atomic_sub(count, &q->nr_buf_used) == 0) + qdio_perf_stat_inc(&perf_stats.inbound_queue_full); break; case SLSB_P_INPUT_ERROR: announce_buffer_error(q, count); diff --git a/drivers/s390/cio/qdio_perf.c b/drivers/s390/cio/qdio_perf.c index 968e3c7c2632..54f7c325a3e6 100644 --- a/drivers/s390/cio/qdio_perf.c +++ b/drivers/s390/cio/qdio_perf.c @@ -64,6 +64,8 @@ static int qdio_perf_proc_show(struct seq_file *m, void *v) (long)atomic_long_read(&perf_stats.fast_requeue)); seq_printf(m, "Number of outbound target full condition\t: %li\n", (long)atomic_long_read(&perf_stats.outbound_target_full)); + seq_printf(m, "Number of inbound queue full condition\t\t: %li\n", + (long)atomic_long_read(&perf_stats.inbound_queue_full)); seq_printf(m, "Number of outbound tasklet mod_timer calls\t: %li\n", (long)atomic_long_read(&perf_stats.debug_tl_out_timer)); seq_printf(m, "Number of stop polling calls\t\t\t: %li\n", diff --git a/drivers/s390/cio/qdio_perf.h b/drivers/s390/cio/qdio_perf.h index ff4504ce1e3c..12454231dc8b 100644 --- a/drivers/s390/cio/qdio_perf.h +++ b/drivers/s390/cio/qdio_perf.h @@ -36,6 +36,7 @@ struct qdio_perf_stats { atomic_long_t outbound_handler; atomic_long_t fast_requeue; atomic_long_t outbound_target_full; + atomic_long_t inbound_queue_full; /* for debugging */ atomic_long_t debug_tl_out_timer; diff --git a/drivers/s390/cio/qdio_setup.c b/drivers/s390/cio/qdio_setup.c index 18d54fc21ce9..8c2dea5fa2b4 100644 --- a/drivers/s390/cio/qdio_setup.c +++ b/drivers/s390/cio/qdio_setup.c @@ -48,7 +48,6 @@ static void set_impl_params(struct qdio_irq *irq_ptr, if (!irq_ptr) return; - WARN_ON((unsigned long)&irq_ptr->qib & 0xff); irq_ptr->qib.pfmt = qib_param_field_format; if (qib_param_field) memcpy(irq_ptr->qib.parm, qib_param_field, @@ -82,14 +81,12 @@ static int __qdio_allocate_qs(struct qdio_q **irq_ptr_qs, int nr_queues) q = kmem_cache_alloc(qdio_q_cache, GFP_KERNEL); if (!q) return -ENOMEM; - WARN_ON((unsigned long)q & 0xff); q->slib = (struct slib *) __get_free_page(GFP_KERNEL); if (!q->slib) { kmem_cache_free(qdio_q_cache, q); return -ENOMEM; } - WARN_ON((unsigned long)q->slib & 0x7ff); irq_ptr_qs[i] = q; } return 0; @@ -131,7 +128,7 @@ static void setup_storage_lists(struct qdio_q *q, struct qdio_irq *irq_ptr, /* fill in sbal */ for (j = 0; j < QDIO_MAX_BUFFERS_PER_Q; j++) { q->sbal[j] = *sbals_array++; - WARN_ON((unsigned long)q->sbal[j] & 0xff); + BUG_ON((unsigned long)q->sbal[j] & 0xff); } /* fill in slib */ @@ -147,11 +144,6 @@ static void setup_storage_lists(struct qdio_q *q, struct qdio_irq *irq_ptr, /* fill in sl */ for (j = 0; j < QDIO_MAX_BUFFERS_PER_Q; j++) q->sl->element[j].sbal = (unsigned long)q->sbal[j]; - - DBF_EVENT("sl-slsb-sbal"); - DBF_HEX(q->sl, sizeof(void *)); - DBF_HEX(&q->slsb, sizeof(void *)); - DBF_HEX(q->sbal, sizeof(void *)); } static void setup_queues(struct qdio_irq *irq_ptr, diff --git a/drivers/scsi/3w-9xxx.c b/drivers/scsi/3w-9xxx.c index 3bf75924741f..84d3bbaa95e7 100644 --- a/drivers/scsi/3w-9xxx.c +++ b/drivers/scsi/3w-9xxx.c @@ -76,6 +76,7 @@ Fix bug in twa_get_param() on 4GB+. Use pci_resource_len() for ioremap(). 2.26.02.012 - Add power management support. + 2.26.02.013 - Fix bug in twa_load_sgl(). */ #include <linux/module.h> @@ -100,7 +101,7 @@ #include "3w-9xxx.h" /* Globals */ -#define TW_DRIVER_VERSION "2.26.02.012" +#define TW_DRIVER_VERSION "2.26.02.013" static TW_Device_Extension *twa_device_extension_list[TW_MAX_SLOT]; static unsigned int twa_device_extension_count; static int twa_major = -1; @@ -1382,10 +1383,12 @@ static void twa_load_sgl(TW_Device_Extension *tw_dev, TW_Command_Full *full_comm newcommand = &full_command_packet->command.newcommand; newcommand->request_id__lunl = cpu_to_le16(TW_REQ_LUN_IN(TW_LUN_OUT(newcommand->request_id__lunl), request_id)); - newcommand->sg_list[0].address = TW_CPU_TO_SGL(dma_handle + sizeof(TW_Ioctl_Buf_Apache) - 1); - newcommand->sg_list[0].length = cpu_to_le32(length); + if (length) { + newcommand->sg_list[0].address = TW_CPU_TO_SGL(dma_handle + sizeof(TW_Ioctl_Buf_Apache) - 1); + newcommand->sg_list[0].length = cpu_to_le32(length); + } newcommand->sgl_entries__lunh = - cpu_to_le16(TW_REQ_LUN_IN(TW_LUN_OUT(newcommand->sgl_entries__lunh), 1)); + cpu_to_le16(TW_REQ_LUN_IN(TW_LUN_OUT(newcommand->sgl_entries__lunh), length ? 1 : 0)); } else { oldcommand = &full_command_packet->command.oldcommand; oldcommand->request_id = request_id; diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index 36900c71a592..9191d1ea6451 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -388,6 +388,16 @@ config BLK_DEV_3W_XXXX_RAID Please read the comments at the top of <file:drivers/scsi/3w-xxxx.c>. +config SCSI_HPSA + tristate "HP Smart Array SCSI driver" + depends on PCI && SCSI + help + This driver supports HP Smart Array Controllers (circa 2009). + It is a SCSI alternative to the cciss driver, which is a block + driver. Anyone wishing to use HP Smart Array controllers who + would prefer the devices be presented to linux as SCSI devices, + rather than as generic block devices should say Y here. + config SCSI_3W_9XXX tristate "3ware 9xxx SATA-RAID support" depends on PCI && SCSI diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile index 280d3c657d60..92a8c500b23d 100644 --- a/drivers/scsi/Makefile +++ b/drivers/scsi/Makefile @@ -91,6 +91,7 @@ obj-$(CONFIG_SCSI_BFA_FC) += bfa/ obj-$(CONFIG_SCSI_PAS16) += pas16.o obj-$(CONFIG_SCSI_T128) += t128.o obj-$(CONFIG_SCSI_DMX3191D) += dmx3191d.o +obj-$(CONFIG_SCSI_HPSA) += hpsa.o obj-$(CONFIG_SCSI_DTC3280) += dtc.o obj-$(CONFIG_SCSI_SYM53C8XX_2) += sym53c8xx_2/ obj-$(CONFIG_SCSI_ZALON) += zalon7xx.o diff --git a/drivers/scsi/be2iscsi/be_cmds.c b/drivers/scsi/be2iscsi/be_cmds.c index 698a527d6cca..f008708f1b08 100644 --- a/drivers/scsi/be2iscsi/be_cmds.c +++ b/drivers/scsi/be2iscsi/be_cmds.c @@ -135,11 +135,15 @@ int beiscsi_process_mcc(struct beiscsi_hba *phba) while ((compl = be_mcc_compl_get(phba))) { if (compl->flags & CQE_FLAGS_ASYNC_MASK) { /* Interpret flags as an async trailer */ - BUG_ON(!is_link_state_evt(compl->flags)); + if (is_link_state_evt(compl->flags)) + /* Interpret compl as a async link evt */ + beiscsi_async_link_state_process(phba, + (struct be_async_event_link_state *) compl); + else + SE_DEBUG(DBG_LVL_1, + " Unsupported Async Event, flags" + " = 0x%08x \n", compl->flags); - /* Interpret compl as a async link evt */ - beiscsi_async_link_state_process(phba, - (struct be_async_event_link_state *) compl); } else if (compl->flags & CQE_FLAGS_COMPLETED_MASK) { status = be_mcc_compl_process(ctrl, compl); atomic_dec(&phba->ctrl.mcc_obj.q.used); diff --git a/drivers/scsi/bnx2i/bnx2i.h b/drivers/scsi/bnx2i/bnx2i.h index 2b973f3c2eb2..6cf9dc37d78b 100644 --- a/drivers/scsi/bnx2i/bnx2i.h +++ b/drivers/scsi/bnx2i/bnx2i.h @@ -684,6 +684,7 @@ extern unsigned int error_mask1, error_mask2; extern u64 iscsi_error_mask; extern unsigned int en_tcp_dack; extern unsigned int event_coal_div; +extern unsigned int event_coal_min; extern struct scsi_transport_template *bnx2i_scsi_xport_template; extern struct iscsi_transport bnx2i_iscsi_transport; diff --git a/drivers/scsi/bnx2i/bnx2i_hwi.c b/drivers/scsi/bnx2i/bnx2i_hwi.c index 5c8d7630c13e..1af578dec276 100644 --- a/drivers/scsi/bnx2i/bnx2i_hwi.c +++ b/drivers/scsi/bnx2i/bnx2i_hwi.c @@ -133,20 +133,38 @@ void bnx2i_arm_cq_event_coalescing(struct bnx2i_endpoint *ep, u8 action) { struct bnx2i_5771x_cq_db *cq_db; u16 cq_index; + u16 next_index; + u32 num_active_cmds; + + /* Coalesce CQ entries only on 10G devices */ if (!test_bit(BNX2I_NX2_DEV_57710, &ep->hba->cnic_dev_type)) return; + /* Do not update CQ DB multiple times before firmware writes + * '0xFFFF' to CQDB->SQN field. Deviation may cause spurious + * interrupts and other unwanted results + */ + cq_db = (struct bnx2i_5771x_cq_db *) ep->qp.cq_pgtbl_virt; + if (cq_db->sqn[0] && cq_db->sqn[0] != 0xFFFF) + return; + if (action == CNIC_ARM_CQE) { - cq_index = ep->qp.cqe_exp_seq_sn + - ep->num_active_cmds / event_coal_div; - cq_index %= (ep->qp.cqe_size * 2 + 1); - if (!cq_index) { + num_active_cmds = ep->num_active_cmds; + if (num_active_cmds <= event_coal_min) + next_index = 1; + else + next_index = event_coal_min + + (num_active_cmds - event_coal_min) / event_coal_div; + if (!next_index) + next_index = 1; + cq_index = ep->qp.cqe_exp_seq_sn + next_index - 1; + if (cq_index > ep->qp.cqe_size * 2) + cq_index -= ep->qp.cqe_size * 2; + if (!cq_index) cq_index = 1; - cq_db = (struct bnx2i_5771x_cq_db *) - ep->qp.cq_pgtbl_virt; - cq_db->sqn[0] = cq_index; - } + + cq_db->sqn[0] = cq_index; } } @@ -366,6 +384,7 @@ int bnx2i_send_iscsi_tmf(struct bnx2i_conn *bnx2i_conn, struct bnx2i_cmd *bnx2i_cmd; struct bnx2i_tmf_request *tmfabort_wqe; u32 dword; + u32 scsi_lun[2]; bnx2i_cmd = (struct bnx2i_cmd *)mtask->dd_data; tmfabort_hdr = (struct iscsi_tm *)mtask->hdr; @@ -376,27 +395,35 @@ int bnx2i_send_iscsi_tmf(struct bnx2i_conn *bnx2i_conn, tmfabort_wqe->op_attr = 0; tmfabort_wqe->op_attr = ISCSI_TMF_REQUEST_ALWAYS_ONE | ISCSI_TM_FUNC_ABORT_TASK; - tmfabort_wqe->lun[0] = be32_to_cpu(tmfabort_hdr->lun[0]); - tmfabort_wqe->lun[1] = be32_to_cpu(tmfabort_hdr->lun[1]); tmfabort_wqe->itt = (mtask->itt | (ISCSI_TASK_TYPE_MPATH << 14)); tmfabort_wqe->reserved2 = 0; tmfabort_wqe->cmd_sn = be32_to_cpu(tmfabort_hdr->cmdsn); ctask = iscsi_itt_to_task(conn, tmfabort_hdr->rtt); - if (!ctask || ctask->sc) + if (!ctask || !ctask->sc) /* * the iscsi layer must have completed the cmd while this * was starting up. + * + * Note: In the case of a SCSI cmd timeout, the task's sc + * is still active; hence ctask->sc != 0 + * In this case, the task must be aborted */ return 0; + ref_sc = ctask->sc; + /* Retrieve LUN directly from the ref_sc */ + int_to_scsilun(ref_sc->device->lun, (struct scsi_lun *) scsi_lun); + tmfabort_wqe->lun[0] = be32_to_cpu(scsi_lun[0]); + tmfabort_wqe->lun[1] = be32_to_cpu(scsi_lun[1]); + if (ref_sc->sc_data_direction == DMA_TO_DEVICE) dword = (ISCSI_TASK_TYPE_WRITE << ISCSI_CMD_REQUEST_TYPE_SHIFT); else dword = (ISCSI_TASK_TYPE_READ << ISCSI_CMD_REQUEST_TYPE_SHIFT); - tmfabort_wqe->ref_itt = (dword | tmfabort_hdr->rtt); + tmfabort_wqe->ref_itt = (dword | (tmfabort_hdr->rtt & ISCSI_ITT_MASK)); tmfabort_wqe->ref_cmd_sn = be32_to_cpu(tmfabort_hdr->refcmdsn); tmfabort_wqe->bd_list_addr_lo = (u32) bnx2i_conn->hba->mp_bd_dma; diff --git a/drivers/scsi/bnx2i/bnx2i_init.c b/drivers/scsi/bnx2i/bnx2i_init.c index 0c4210d48ee8..6d8172e781cf 100644 --- a/drivers/scsi/bnx2i/bnx2i_init.c +++ b/drivers/scsi/bnx2i/bnx2i_init.c @@ -17,8 +17,8 @@ static struct list_head adapter_list = LIST_HEAD_INIT(adapter_list); static u32 adapter_count; #define DRV_MODULE_NAME "bnx2i" -#define DRV_MODULE_VERSION "2.0.1e" -#define DRV_MODULE_RELDATE "June 22, 2009" +#define DRV_MODULE_VERSION "2.1.0" +#define DRV_MODULE_RELDATE "Dec 06, 2009" static char version[] __devinitdata = "Broadcom NetXtreme II iSCSI Driver " DRV_MODULE_NAME \ @@ -32,6 +32,10 @@ MODULE_VERSION(DRV_MODULE_VERSION); static DEFINE_MUTEX(bnx2i_dev_lock); +unsigned int event_coal_min = 24; +module_param(event_coal_min, int, 0664); +MODULE_PARM_DESC(event_coal_min, "Event Coalescing Minimum Commands"); + unsigned int event_coal_div = 1; module_param(event_coal_div, int, 0664); MODULE_PARM_DESC(event_coal_div, "Event Coalescing Divide Factor"); @@ -83,8 +87,12 @@ void bnx2i_identify_device(struct bnx2i_hba *hba) set_bit(BNX2I_NX2_DEV_5709, &hba->cnic_dev_type); hba->mail_queue_access = BNX2I_MQ_BIN_MODE; } else if (hba->pci_did == PCI_DEVICE_ID_NX2_57710 || - hba->pci_did == PCI_DEVICE_ID_NX2_57711) + hba->pci_did == PCI_DEVICE_ID_NX2_57711 || + hba->pci_did == PCI_DEVICE_ID_NX2_57711E) set_bit(BNX2I_NX2_DEV_57710, &hba->cnic_dev_type); + else + printk(KERN_ALERT "bnx2i: unknown device, 0x%x\n", + hba->pci_did); } @@ -363,7 +371,7 @@ static int __init bnx2i_mod_init(void) printk(KERN_INFO "%s", version); - if (!is_power_of_2(sq_size)) + if (sq_size && !is_power_of_2(sq_size)) sq_size = roundup_pow_of_two(sq_size); mutex_init(&bnx2i_dev_lock); diff --git a/drivers/scsi/bnx2i/bnx2i_iscsi.c b/drivers/scsi/bnx2i/bnx2i_iscsi.c index 132898c88d5e..33b2294625bb 100644 --- a/drivers/scsi/bnx2i/bnx2i_iscsi.c +++ b/drivers/scsi/bnx2i/bnx2i_iscsi.c @@ -485,7 +485,6 @@ static int bnx2i_setup_cmd_pool(struct bnx2i_hba *hba, struct iscsi_task *task = session->cmds[i]; struct bnx2i_cmd *cmd = task->dd_data; - /* Anil */ task->hdr = &cmd->hdr; task->hdr_max = sizeof(struct iscsi_hdr); @@ -765,7 +764,6 @@ struct bnx2i_hba *bnx2i_alloc_hba(struct cnic_dev *cnic) hba->pci_svid = hba->pcidev->subsystem_vendor; hba->pci_func = PCI_FUNC(hba->pcidev->devfn); hba->pci_devno = PCI_SLOT(hba->pcidev->devfn); - bnx2i_identify_device(hba); bnx2i_identify_device(hba); bnx2i_setup_host_queue_size(hba, shost); diff --git a/drivers/scsi/cxgb3i/cxgb3i_offload.c b/drivers/scsi/cxgb3i/cxgb3i_offload.c index c1d5be4adf9c..26ffdcd5a437 100644 --- a/drivers/scsi/cxgb3i/cxgb3i_offload.c +++ b/drivers/scsi/cxgb3i/cxgb3i_offload.c @@ -291,7 +291,7 @@ static void act_open_req_arp_failure(struct t3cdev *dev, struct sk_buff *skb) c3cn_hold(c3cn); spin_lock_bh(&c3cn->lock); if (c3cn->state == C3CN_STATE_CONNECTING) - fail_act_open(c3cn, EHOSTUNREACH); + fail_act_open(c3cn, -EHOSTUNREACH); spin_unlock_bh(&c3cn->lock); c3cn_put(c3cn); __kfree_skb(skb); @@ -792,18 +792,18 @@ static int act_open_rpl_status_to_errno(int status) { switch (status) { case CPL_ERR_CONN_RESET: - return ECONNREFUSED; + return -ECONNREFUSED; case CPL_ERR_ARP_MISS: - return EHOSTUNREACH; + return -EHOSTUNREACH; case CPL_ERR_CONN_TIMEDOUT: - return ETIMEDOUT; + return -ETIMEDOUT; case CPL_ERR_TCAM_FULL: - return ENOMEM; + return -ENOMEM; case CPL_ERR_CONN_EXIST: cxgb3i_log_error("ACTIVE_OPEN_RPL: 4-tuple in use\n"); - return EADDRINUSE; + return -EADDRINUSE; default: - return EIO; + return -EIO; } } @@ -817,7 +817,7 @@ static void act_open_retry_timer(unsigned long data) spin_lock_bh(&c3cn->lock); skb = alloc_skb(sizeof(struct cpl_act_open_req), GFP_ATOMIC); if (!skb) - fail_act_open(c3cn, ENOMEM); + fail_act_open(c3cn, -ENOMEM); else { skb->sk = (struct sock *)c3cn; set_arp_failure_handler(skb, act_open_req_arp_failure); @@ -966,14 +966,14 @@ static int abort_status_to_errno(struct s3_conn *c3cn, int abort_reason, case CPL_ERR_BAD_SYN: /* fall through */ case CPL_ERR_CONN_RESET: return c3cn->state > C3CN_STATE_ESTABLISHED ? - EPIPE : ECONNRESET; + -EPIPE : -ECONNRESET; case CPL_ERR_XMIT_TIMEDOUT: case CPL_ERR_PERSIST_TIMEDOUT: case CPL_ERR_FINWAIT2_TIMEDOUT: case CPL_ERR_KEEPALIVE_TIMEDOUT: - return ETIMEDOUT; + return -ETIMEDOUT; default: - return EIO; + return -EIO; } } @@ -1563,7 +1563,7 @@ free_tid: s3_free_atid(cdev, c3cn->tid); c3cn->tid = 0; out_err: - return -1; + return -EINVAL; } diff --git a/drivers/scsi/cxgb3i/cxgb3i_pdu.c b/drivers/scsi/cxgb3i/cxgb3i_pdu.c index 709105071177..1fe3b0f1f3c9 100644 --- a/drivers/scsi/cxgb3i/cxgb3i_pdu.c +++ b/drivers/scsi/cxgb3i/cxgb3i_pdu.c @@ -388,8 +388,8 @@ int cxgb3i_conn_xmit_pdu(struct iscsi_task *task) if (err > 0) { int pdulen = err; - cxgb3i_tx_debug("task 0x%p, skb 0x%p, len %u/%u, rv %d.\n", - task, skb, skb->len, skb->data_len, err); + cxgb3i_tx_debug("task 0x%p, skb 0x%p, len %u/%u, rv %d.\n", + task, skb, skb->len, skb->data_len, err); if (task->conn->hdrdgst_en) pdulen += ISCSI_DIGEST_SIZE; diff --git a/drivers/scsi/device_handler/scsi_dh_rdac.c b/drivers/scsi/device_handler/scsi_dh_rdac.c index 47cfe1c49c3e..1a660191a905 100644 --- a/drivers/scsi/device_handler/scsi_dh_rdac.c +++ b/drivers/scsi/device_handler/scsi_dh_rdac.c @@ -748,6 +748,8 @@ static const struct scsi_dh_devlist rdac_dev_list[] = { {"IBM", "1724"}, {"IBM", "1726"}, {"IBM", "1742"}, + {"IBM", "1745"}, + {"IBM", "1746"}, {"IBM", "1814"}, {"IBM", "1815"}, {"IBM", "1818"}, diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c index a30ffaa1222c..10be9f36a4cc 100644 --- a/drivers/scsi/fcoe/fcoe.c +++ b/drivers/scsi/fcoe/fcoe.c @@ -101,6 +101,8 @@ static int fcoe_cpu_callback(struct notifier_block *, unsigned long, void *); static int fcoe_create(const char *, struct kernel_param *); static int fcoe_destroy(const char *, struct kernel_param *); +static int fcoe_enable(const char *, struct kernel_param *); +static int fcoe_disable(const char *, struct kernel_param *); static struct fc_seq *fcoe_elsct_send(struct fc_lport *, u32 did, struct fc_frame *, @@ -115,10 +117,16 @@ static void fcoe_get_lesb(struct fc_lport *, struct fc_els_lesb *); module_param_call(create, fcoe_create, NULL, NULL, S_IWUSR); __MODULE_PARM_TYPE(create, "string"); -MODULE_PARM_DESC(create, "Create fcoe fcoe using net device passed in."); +MODULE_PARM_DESC(create, " Creates fcoe instance on a ethernet interface"); module_param_call(destroy, fcoe_destroy, NULL, NULL, S_IWUSR); __MODULE_PARM_TYPE(destroy, "string"); -MODULE_PARM_DESC(destroy, "Destroy fcoe fcoe"); +MODULE_PARM_DESC(destroy, " Destroys fcoe instance on a ethernet interface"); +module_param_call(enable, fcoe_enable, NULL, NULL, S_IWUSR); +__MODULE_PARM_TYPE(enable, "string"); +MODULE_PARM_DESC(enable, " Enables fcoe on a ethernet interface."); +module_param_call(disable, fcoe_disable, NULL, NULL, S_IWUSR); +__MODULE_PARM_TYPE(disable, "string"); +MODULE_PARM_DESC(disable, " Disables fcoe on a ethernet interface."); /* notification function for packets from net device */ static struct notifier_block fcoe_notifier = { @@ -545,6 +553,23 @@ static void fcoe_queue_timer(ulong lport) } /** + * fcoe_get_wwn() - Get the world wide name from LLD if it supports it + * @netdev: the associated net device + * @wwn: the output WWN + * @type: the type of WWN (WWPN or WWNN) + * + * Returns: 0 for success + */ +static int fcoe_get_wwn(struct net_device *netdev, u64 *wwn, int type) +{ + const struct net_device_ops *ops = netdev->netdev_ops; + + if (ops->ndo_fcoe_get_wwn) + return ops->ndo_fcoe_get_wwn(netdev, wwn, type); + return -EINVAL; +} + +/** * fcoe_netdev_config() - Set up net devive for SW FCoE * @lport: The local port that is associated with the net device * @netdev: The associated net device @@ -611,9 +636,13 @@ static int fcoe_netdev_config(struct fc_lport *lport, struct net_device *netdev) */ if (netdev->priv_flags & IFF_802_1Q_VLAN) vid = vlan_dev_vlan_id(netdev); - wwnn = fcoe_wwn_from_mac(fcoe->ctlr.ctl_src_addr, 1, 0); + + if (fcoe_get_wwn(netdev, &wwnn, NETDEV_FCOE_WWNN)) + wwnn = fcoe_wwn_from_mac(fcoe->ctlr.ctl_src_addr, 1, 0); fc_set_wwnn(lport, wwnn); - wwpn = fcoe_wwn_from_mac(fcoe->ctlr.ctl_src_addr, 2, vid); + if (fcoe_get_wwn(netdev, &wwpn, NETDEV_FCOE_WWPN)) + wwpn = fcoe_wwn_from_mac(fcoe->ctlr.ctl_src_addr, + 2, vid); fc_set_wwpn(lport, wwpn); } @@ -1231,7 +1260,7 @@ int fcoe_rcv(struct sk_buff *skb, struct net_device *netdev, "CPU.\n"); spin_unlock_bh(&fps->fcoe_rx_list.lock); - cpu = first_cpu(cpu_online_map); + cpu = cpumask_first(cpu_online_mask); fps = &per_cpu(fcoe_percpu, cpu); spin_lock_bh(&fps->fcoe_rx_list.lock); if (!fps->thread) { @@ -1838,6 +1867,104 @@ static struct net_device *fcoe_if_to_netdev(const char *buffer) } /** + * fcoe_disable() - Disables a FCoE interface + * @buffer: The name of the Ethernet interface to be disabled + * @kp: The associated kernel parameter + * + * Called from sysfs. + * + * Returns: 0 for success + */ +static int fcoe_disable(const char *buffer, struct kernel_param *kp) +{ + struct fcoe_interface *fcoe; + struct net_device *netdev; + int rc = 0; + + mutex_lock(&fcoe_config_mutex); +#ifdef CONFIG_FCOE_MODULE + /* + * Make sure the module has been initialized, and is not about to be + * removed. Module paramter sysfs files are writable before the + * module_init function is called and after module_exit. + */ + if (THIS_MODULE->state != MODULE_STATE_LIVE) { + rc = -ENODEV; + goto out_nodev; + } +#endif + + netdev = fcoe_if_to_netdev(buffer); + if (!netdev) { + rc = -ENODEV; + goto out_nodev; + } + + rtnl_lock(); + fcoe = fcoe_hostlist_lookup_port(netdev); + rtnl_unlock(); + + if (fcoe) + fc_fabric_logoff(fcoe->ctlr.lp); + else + rc = -ENODEV; + + dev_put(netdev); +out_nodev: + mutex_unlock(&fcoe_config_mutex); + return rc; +} + +/** + * fcoe_enable() - Enables a FCoE interface + * @buffer: The name of the Ethernet interface to be enabled + * @kp: The associated kernel parameter + * + * Called from sysfs. + * + * Returns: 0 for success + */ +static int fcoe_enable(const char *buffer, struct kernel_param *kp) +{ + struct fcoe_interface *fcoe; + struct net_device *netdev; + int rc = 0; + + mutex_lock(&fcoe_config_mutex); +#ifdef CONFIG_FCOE_MODULE + /* + * Make sure the module has been initialized, and is not about to be + * removed. Module paramter sysfs files are writable before the + * module_init function is called and after module_exit. + */ + if (THIS_MODULE->state != MODULE_STATE_LIVE) { + rc = -ENODEV; + goto out_nodev; + } +#endif + + netdev = fcoe_if_to_netdev(buffer); + if (!netdev) { + rc = -ENODEV; + goto out_nodev; + } + + rtnl_lock(); + fcoe = fcoe_hostlist_lookup_port(netdev); + rtnl_unlock(); + + if (fcoe) + rc = fc_fabric_login(fcoe->ctlr.lp); + else + rc = -ENODEV; + + dev_put(netdev); +out_nodev: + mutex_unlock(&fcoe_config_mutex); + return rc; +} + +/** * fcoe_destroy() - Destroy a FCoE interface * @buffer: The name of the Ethernet interface to be destroyed * @kp: The associated kernel parameter diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c new file mode 100644 index 000000000000..bb96fdd58e23 --- /dev/null +++ b/drivers/scsi/hpsa.c @@ -0,0 +1,3531 @@ +/* + * Disk Array driver for HP Smart Array SAS controllers + * Copyright 2000, 2009 Hewlett-Packard Development Company, L.P. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Questions/Comments/Bugfixes to iss_storagedev@hp.com + * + */ + +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/types.h> +#include <linux/pci.h> +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/delay.h> +#include <linux/fs.h> +#include <linux/timer.h> +#include <linux/seq_file.h> +#include <linux/init.h> +#include <linux/spinlock.h> +#include <linux/smp_lock.h> +#include <linux/compat.h> +#include <linux/blktrace_api.h> +#include <linux/uaccess.h> +#include <linux/io.h> +#include <linux/dma-mapping.h> +#include <linux/completion.h> +#include <linux/moduleparam.h> +#include <scsi/scsi.h> +#include <scsi/scsi_cmnd.h> +#include <scsi/scsi_device.h> +#include <scsi/scsi_host.h> +#include <linux/cciss_ioctl.h> +#include <linux/string.h> +#include <linux/bitmap.h> +#include <asm/atomic.h> +#include <linux/kthread.h> +#include "hpsa_cmd.h" +#include "hpsa.h" + +/* HPSA_DRIVER_VERSION must be 3 byte values (0-255) separated by '.' */ +#define HPSA_DRIVER_VERSION "1.0.0" +#define DRIVER_NAME "HP HPSA Driver (v " HPSA_DRIVER_VERSION ")" + +/* How long to wait (in milliseconds) for board to go into simple mode */ +#define MAX_CONFIG_WAIT 30000 +#define MAX_IOCTL_CONFIG_WAIT 1000 + +/*define how many times we will try a command because of bus resets */ +#define MAX_CMD_RETRIES 3 + +/* Embedded module documentation macros - see modules.h */ +MODULE_AUTHOR("Hewlett-Packard Company"); +MODULE_DESCRIPTION("Driver for HP Smart Array Controller version " \ + HPSA_DRIVER_VERSION); +MODULE_SUPPORTED_DEVICE("HP Smart Array Controllers"); +MODULE_VERSION(HPSA_DRIVER_VERSION); +MODULE_LICENSE("GPL"); + +static int hpsa_allow_any; +module_param(hpsa_allow_any, int, S_IRUGO|S_IWUSR); +MODULE_PARM_DESC(hpsa_allow_any, + "Allow hpsa driver to access unknown HP Smart Array hardware"); + +/* define the PCI info for the cards we can control */ +static const struct pci_device_id hpsa_pci_device_id[] = { + {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSC, 0x103C, 0x3223}, + {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSC, 0x103C, 0x3234}, + {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSC, 0x103C, 0x323D}, + {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3241}, + {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3243}, + {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3245}, + {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3247}, + {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3249}, + {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x324a}, + {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x324b}, + {PCI_VENDOR_ID_HP, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, + PCI_CLASS_STORAGE_RAID << 8, 0xffff << 8, 0}, + {0,} +}; + +MODULE_DEVICE_TABLE(pci, hpsa_pci_device_id); + +/* board_id = Subsystem Device ID & Vendor ID + * product = Marketing Name for the board + * access = Address of the struct of function pointers + */ +static struct board_type products[] = { + {0x3223103C, "Smart Array P800", &SA5_access}, + {0x3234103C, "Smart Array P400", &SA5_access}, + {0x323d103c, "Smart Array P700M", &SA5_access}, + {0x3241103C, "Smart Array P212", &SA5_access}, + {0x3243103C, "Smart Array P410", &SA5_access}, + {0x3245103C, "Smart Array P410i", &SA5_access}, + {0x3247103C, "Smart Array P411", &SA5_access}, + {0x3249103C, "Smart Array P812", &SA5_access}, + {0x324a103C, "Smart Array P712m", &SA5_access}, + {0x324b103C, "Smart Array P711m", &SA5_access}, + {0xFFFF103C, "Unknown Smart Array", &SA5_access}, +}; + +static int number_of_controllers; + +static irqreturn_t do_hpsa_intr(int irq, void *dev_id); +static int hpsa_ioctl(struct scsi_device *dev, int cmd, void *arg); +static void start_io(struct ctlr_info *h); + +#ifdef CONFIG_COMPAT +static int hpsa_compat_ioctl(struct scsi_device *dev, int cmd, void *arg); +#endif + +static void cmd_free(struct ctlr_info *h, struct CommandList *c); +static void cmd_special_free(struct ctlr_info *h, struct CommandList *c); +static struct CommandList *cmd_alloc(struct ctlr_info *h); +static struct CommandList *cmd_special_alloc(struct ctlr_info *h); +static void fill_cmd(struct CommandList *c, __u8 cmd, struct ctlr_info *h, + void *buff, size_t size, __u8 page_code, unsigned char *scsi3addr, + int cmd_type); + +static int hpsa_scsi_queue_command(struct scsi_cmnd *cmd, + void (*done)(struct scsi_cmnd *)); + +static int hpsa_eh_device_reset_handler(struct scsi_cmnd *scsicmd); +static int hpsa_slave_alloc(struct scsi_device *sdev); +static void hpsa_slave_destroy(struct scsi_device *sdev); + +static ssize_t raid_level_show(struct device *dev, + struct device_attribute *attr, char *buf); +static ssize_t lunid_show(struct device *dev, + struct device_attribute *attr, char *buf); +static ssize_t unique_id_show(struct device *dev, + struct device_attribute *attr, char *buf); +static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno); +static ssize_t host_store_rescan(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count); +static int check_for_unit_attention(struct ctlr_info *h, + struct CommandList *c); +static void check_ioctl_unit_attention(struct ctlr_info *h, + struct CommandList *c); + +static DEVICE_ATTR(raid_level, S_IRUGO, raid_level_show, NULL); +static DEVICE_ATTR(lunid, S_IRUGO, lunid_show, NULL); +static DEVICE_ATTR(unique_id, S_IRUGO, unique_id_show, NULL); +static DEVICE_ATTR(rescan, S_IWUSR, NULL, host_store_rescan); + +static struct device_attribute *hpsa_sdev_attrs[] = { + &dev_attr_raid_level, + &dev_attr_lunid, + &dev_attr_unique_id, + NULL, +}; + +static struct device_attribute *hpsa_shost_attrs[] = { + &dev_attr_rescan, + NULL, +}; + +static struct scsi_host_template hpsa_driver_template = { + .module = THIS_MODULE, + .name = "hpsa", + .proc_name = "hpsa", + .queuecommand = hpsa_scsi_queue_command, + .can_queue = 512, + .this_id = -1, + .sg_tablesize = MAXSGENTRIES, + .cmd_per_lun = 512, + .use_clustering = ENABLE_CLUSTERING, + .eh_device_reset_handler = hpsa_eh_device_reset_handler, + .ioctl = hpsa_ioctl, + .slave_alloc = hpsa_slave_alloc, + .slave_destroy = hpsa_slave_destroy, +#ifdef CONFIG_COMPAT + .compat_ioctl = hpsa_compat_ioctl, +#endif + .sdev_attrs = hpsa_sdev_attrs, + .shost_attrs = hpsa_shost_attrs, +}; + +static inline struct ctlr_info *sdev_to_hba(struct scsi_device *sdev) +{ + unsigned long *priv = shost_priv(sdev->host); + return (struct ctlr_info *) *priv; +} + +static struct task_struct *hpsa_scan_thread; +static DEFINE_MUTEX(hpsa_scan_mutex); +static LIST_HEAD(hpsa_scan_q); +static int hpsa_scan_func(void *data); + +/** + * add_to_scan_list() - add controller to rescan queue + * @h: Pointer to the controller. + * + * Adds the controller to the rescan queue if not already on the queue. + * + * returns 1 if added to the queue, 0 if skipped (could be on the + * queue already, or the controller could be initializing or shutting + * down). + **/ +static int add_to_scan_list(struct ctlr_info *h) +{ + struct ctlr_info *test_h; + int found = 0; + int ret = 0; + + if (h->busy_initializing) + return 0; + + /* + * If we don't get the lock, it means the driver is unloading + * and there's no point in scheduling a new scan. + */ + if (!mutex_trylock(&h->busy_shutting_down)) + return 0; + + mutex_lock(&hpsa_scan_mutex); + list_for_each_entry(test_h, &hpsa_scan_q, scan_list) { + if (test_h == h) { + found = 1; + break; + } + } + if (!found && !h->busy_scanning) { + INIT_COMPLETION(h->scan_wait); + list_add_tail(&h->scan_list, &hpsa_scan_q); + ret = 1; + } + mutex_unlock(&hpsa_scan_mutex); + mutex_unlock(&h->busy_shutting_down); + + return ret; +} + +/** + * remove_from_scan_list() - remove controller from rescan queue + * @h: Pointer to the controller. + * + * Removes the controller from the rescan queue if present. Blocks if + * the controller is currently conducting a rescan. The controller + * can be in one of three states: + * 1. Doesn't need a scan + * 2. On the scan list, but not scanning yet (we remove it) + * 3. Busy scanning (and not on the list). In this case we want to wait for + * the scan to complete to make sure the scanning thread for this + * controller is completely idle. + **/ +static void remove_from_scan_list(struct ctlr_info *h) +{ + struct ctlr_info *test_h, *tmp_h; + + mutex_lock(&hpsa_scan_mutex); + list_for_each_entry_safe(test_h, tmp_h, &hpsa_scan_q, scan_list) { + if (test_h == h) { /* state 2. */ + list_del(&h->scan_list); + complete_all(&h->scan_wait); + mutex_unlock(&hpsa_scan_mutex); + return; + } + } + if (h->busy_scanning) { /* state 3. */ + mutex_unlock(&hpsa_scan_mutex); + wait_for_completion(&h->scan_wait); + } else { /* state 1, nothing to do. */ + mutex_unlock(&hpsa_scan_mutex); + } +} + +/* hpsa_scan_func() - kernel thread used to rescan controllers + * @data: Ignored. + * + * A kernel thread used scan for drive topology changes on + * controllers. The thread processes only one controller at a time + * using a queue. Controllers are added to the queue using + * add_to_scan_list() and removed from the queue either after done + * processing or using remove_from_scan_list(). + * + * returns 0. + **/ +static int hpsa_scan_func(__attribute__((unused)) void *data) +{ + struct ctlr_info *h; + int host_no; + + while (1) { + set_current_state(TASK_INTERRUPTIBLE); + schedule(); + if (kthread_should_stop()) + break; + + while (1) { + mutex_lock(&hpsa_scan_mutex); + if (list_empty(&hpsa_scan_q)) { + mutex_unlock(&hpsa_scan_mutex); + break; + } + h = list_entry(hpsa_scan_q.next, struct ctlr_info, + scan_list); + list_del(&h->scan_list); + h->busy_scanning = 1; + mutex_unlock(&hpsa_scan_mutex); + host_no = h->scsi_host ? h->scsi_host->host_no : -1; + hpsa_update_scsi_devices(h, host_no); + complete_all(&h->scan_wait); + mutex_lock(&hpsa_scan_mutex); + h->busy_scanning = 0; + mutex_unlock(&hpsa_scan_mutex); + } + } + return 0; +} + +static int check_for_unit_attention(struct ctlr_info *h, + struct CommandList *c) +{ + if (c->err_info->SenseInfo[2] != UNIT_ATTENTION) + return 0; + + switch (c->err_info->SenseInfo[12]) { + case STATE_CHANGED: + dev_warn(&h->pdev->dev, "hpsa%d: a state change " + "detected, command retried\n", h->ctlr); + break; + case LUN_FAILED: + dev_warn(&h->pdev->dev, "hpsa%d: LUN failure " + "detected, action required\n", h->ctlr); + break; + case REPORT_LUNS_CHANGED: + dev_warn(&h->pdev->dev, "hpsa%d: report LUN data " + "changed\n", h->ctlr); + /* + * Here, we could call add_to_scan_list and wake up the scan thread, + * except that it's quite likely that we will get more than one + * REPORT_LUNS_CHANGED condition in quick succession, which means + * that those which occur after the first one will likely happen + * *during* the hpsa_scan_thread's rescan. And the rescan code is not + * robust enough to restart in the middle, undoing what it has already + * done, and it's not clear that it's even possible to do this, since + * part of what it does is notify the SCSI mid layer, which starts + * doing it's own i/o to read partition tables and so on, and the + * driver doesn't have visibility to know what might need undoing. + * In any event, if possible, it is horribly complicated to get right + * so we just don't do it for now. + * + * Note: this REPORT_LUNS_CHANGED condition only occurs on the MSA2012. + */ + break; + case POWER_OR_RESET: + dev_warn(&h->pdev->dev, "hpsa%d: a power on " + "or device reset detected\n", h->ctlr); + break; + case UNIT_ATTENTION_CLEARED: + dev_warn(&h->pdev->dev, "hpsa%d: unit attention " + "cleared by another initiator\n", h->ctlr); + break; + default: + dev_warn(&h->pdev->dev, "hpsa%d: unknown " + "unit attention detected\n", h->ctlr); + break; + } + return 1; +} + +static ssize_t host_store_rescan(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct ctlr_info *h; + struct Scsi_Host *shost = class_to_shost(dev); + unsigned long *priv = shost_priv(shost); + h = (struct ctlr_info *) *priv; + if (add_to_scan_list(h)) { + wake_up_process(hpsa_scan_thread); + wait_for_completion_interruptible(&h->scan_wait); + } + return count; +} + +/* Enqueuing and dequeuing functions for cmdlists. */ +static inline void addQ(struct hlist_head *list, struct CommandList *c) +{ + hlist_add_head(&c->list, list); +} + +static void enqueue_cmd_and_start_io(struct ctlr_info *h, + struct CommandList *c) +{ + unsigned long flags; + spin_lock_irqsave(&h->lock, flags); + addQ(&h->reqQ, c); + h->Qdepth++; + start_io(h); + spin_unlock_irqrestore(&h->lock, flags); +} + +static inline void removeQ(struct CommandList *c) +{ + if (WARN_ON(hlist_unhashed(&c->list))) + return; + hlist_del_init(&c->list); +} + +static inline int is_hba_lunid(unsigned char scsi3addr[]) +{ + return memcmp(scsi3addr, RAID_CTLR_LUNID, 8) == 0; +} + +static inline int is_logical_dev_addr_mode(unsigned char scsi3addr[]) +{ + return (scsi3addr[3] & 0xC0) == 0x40; +} + +static const char *raid_label[] = { "0", "4", "1(1+0)", "5", "5+1", "ADG", + "UNKNOWN" +}; +#define RAID_UNKNOWN (ARRAY_SIZE(raid_label) - 1) + +static ssize_t raid_level_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + ssize_t l = 0; + int rlevel; + struct ctlr_info *h; + struct scsi_device *sdev; + struct hpsa_scsi_dev_t *hdev; + unsigned long flags; + + sdev = to_scsi_device(dev); + h = sdev_to_hba(sdev); + spin_lock_irqsave(&h->lock, flags); + hdev = sdev->hostdata; + if (!hdev) { + spin_unlock_irqrestore(&h->lock, flags); + return -ENODEV; + } + + /* Is this even a logical drive? */ + if (!is_logical_dev_addr_mode(hdev->scsi3addr)) { + spin_unlock_irqrestore(&h->lock, flags); + l = snprintf(buf, PAGE_SIZE, "N/A\n"); + return l; + } + + rlevel = hdev->raid_level; + spin_unlock_irqrestore(&h->lock, flags); + if (rlevel < 0 || rlevel > RAID_UNKNOWN) + rlevel = RAID_UNKNOWN; + l = snprintf(buf, PAGE_SIZE, "RAID %s\n", raid_label[rlevel]); + return l; +} + +static ssize_t lunid_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct ctlr_info *h; + struct scsi_device *sdev; + struct hpsa_scsi_dev_t *hdev; + unsigned long flags; + unsigned char lunid[8]; + + sdev = to_scsi_device(dev); + h = sdev_to_hba(sdev); + spin_lock_irqsave(&h->lock, flags); + hdev = sdev->hostdata; + if (!hdev) { + spin_unlock_irqrestore(&h->lock, flags); + return -ENODEV; + } + memcpy(lunid, hdev->scsi3addr, sizeof(lunid)); + spin_unlock_irqrestore(&h->lock, flags); + return snprintf(buf, 20, "0x%02x%02x%02x%02x%02x%02x%02x%02x\n", + lunid[0], lunid[1], lunid[2], lunid[3], + lunid[4], lunid[5], lunid[6], lunid[7]); +} + +static ssize_t unique_id_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct ctlr_info *h; + struct scsi_device *sdev; + struct hpsa_scsi_dev_t *hdev; + unsigned long flags; + unsigned char sn[16]; + + sdev = to_scsi_device(dev); + h = sdev_to_hba(sdev); + spin_lock_irqsave(&h->lock, flags); + hdev = sdev->hostdata; + if (!hdev) { + spin_unlock_irqrestore(&h->lock, flags); + return -ENODEV; + } + memcpy(sn, hdev->device_id, sizeof(sn)); + spin_unlock_irqrestore(&h->lock, flags); + return snprintf(buf, 16 * 2 + 2, + "%02X%02X%02X%02X%02X%02X%02X%02X" + "%02X%02X%02X%02X%02X%02X%02X%02X\n", + sn[0], sn[1], sn[2], sn[3], + sn[4], sn[5], sn[6], sn[7], + sn[8], sn[9], sn[10], sn[11], + sn[12], sn[13], sn[14], sn[15]); +} + +static int hpsa_find_target_lun(struct ctlr_info *h, + unsigned char scsi3addr[], int bus, int *target, int *lun) +{ + /* finds an unused bus, target, lun for a new physical device + * assumes h->devlock is held + */ + int i, found = 0; + DECLARE_BITMAP(lun_taken, HPSA_MAX_SCSI_DEVS_PER_HBA); + + memset(&lun_taken[0], 0, HPSA_MAX_SCSI_DEVS_PER_HBA >> 3); + + for (i = 0; i < h->ndevices; i++) { + if (h->dev[i]->bus == bus && h->dev[i]->target != -1) + set_bit(h->dev[i]->target, lun_taken); + } + + for (i = 0; i < HPSA_MAX_SCSI_DEVS_PER_HBA; i++) { + if (!test_bit(i, lun_taken)) { + /* *bus = 1; */ + *target = i; + *lun = 0; + found = 1; + break; + } + } + return !found; +} + +/* Add an entry into h->dev[] array. */ +static int hpsa_scsi_add_entry(struct ctlr_info *h, int hostno, + struct hpsa_scsi_dev_t *device, + struct hpsa_scsi_dev_t *added[], int *nadded) +{ + /* assumes h->devlock is held */ + int n = h->ndevices; + int i; + unsigned char addr1[8], addr2[8]; + struct hpsa_scsi_dev_t *sd; + + if (n >= HPSA_MAX_SCSI_DEVS_PER_HBA) { + dev_err(&h->pdev->dev, "too many devices, some will be " + "inaccessible.\n"); + return -1; + } + + /* physical devices do not have lun or target assigned until now. */ + if (device->lun != -1) + /* Logical device, lun is already assigned. */ + goto lun_assigned; + + /* If this device a non-zero lun of a multi-lun device + * byte 4 of the 8-byte LUN addr will contain the logical + * unit no, zero otherise. + */ + if (device->scsi3addr[4] == 0) { + /* This is not a non-zero lun of a multi-lun device */ + if (hpsa_find_target_lun(h, device->scsi3addr, + device->bus, &device->target, &device->lun) != 0) + return -1; + goto lun_assigned; + } + + /* This is a non-zero lun of a multi-lun device. + * Search through our list and find the device which + * has the same 8 byte LUN address, excepting byte 4. + * Assign the same bus and target for this new LUN. + * Use the logical unit number from the firmware. + */ + memcpy(addr1, device->scsi3addr, 8); + addr1[4] = 0; + for (i = 0; i < n; i++) { + sd = h->dev[i]; + memcpy(addr2, sd->scsi3addr, 8); + addr2[4] = 0; + /* differ only in byte 4? */ + if (memcmp(addr1, addr2, 8) == 0) { + device->bus = sd->bus; + device->target = sd->target; + device->lun = device->scsi3addr[4]; + break; + } + } + if (device->lun == -1) { + dev_warn(&h->pdev->dev, "physical device with no LUN=0," + " suspect firmware bug or unsupported hardware " + "configuration.\n"); + return -1; + } + +lun_assigned: + + h->dev[n] = device; + h->ndevices++; + added[*nadded] = device; + (*nadded)++; + + /* initially, (before registering with scsi layer) we don't + * know our hostno and we don't want to print anything first + * time anyway (the scsi layer's inquiries will show that info) + */ + /* if (hostno != -1) */ + dev_info(&h->pdev->dev, "%s device c%db%dt%dl%d added.\n", + scsi_device_type(device->devtype), hostno, + device->bus, device->target, device->lun); + return 0; +} + +/* Remove an entry from h->dev[] array. */ +static void hpsa_scsi_remove_entry(struct ctlr_info *h, int hostno, int entry, + struct hpsa_scsi_dev_t *removed[], int *nremoved) +{ + /* assumes h->devlock is held */ + int i; + struct hpsa_scsi_dev_t *sd; + + if (entry < 0 || entry >= HPSA_MAX_SCSI_DEVS_PER_HBA) + BUG(); + + sd = h->dev[entry]; + removed[*nremoved] = h->dev[entry]; + (*nremoved)++; + + for (i = entry; i < h->ndevices-1; i++) + h->dev[i] = h->dev[i+1]; + h->ndevices--; + dev_info(&h->pdev->dev, "%s device c%db%dt%dl%d removed.\n", + scsi_device_type(sd->devtype), hostno, sd->bus, sd->target, + sd->lun); +} + +#define SCSI3ADDR_EQ(a, b) ( \ + (a)[7] == (b)[7] && \ + (a)[6] == (b)[6] && \ + (a)[5] == (b)[5] && \ + (a)[4] == (b)[4] && \ + (a)[3] == (b)[3] && \ + (a)[2] == (b)[2] && \ + (a)[1] == (b)[1] && \ + (a)[0] == (b)[0]) + +static void fixup_botched_add(struct ctlr_info *h, + struct hpsa_scsi_dev_t *added) +{ + /* called when scsi_add_device fails in order to re-adjust + * h->dev[] to match the mid layer's view. + */ + unsigned long flags; + int i, j; + + spin_lock_irqsave(&h->lock, flags); + for (i = 0; i < h->ndevices; i++) { + if (h->dev[i] == added) { + for (j = i; j < h->ndevices-1; j++) + h->dev[j] = h->dev[j+1]; + h->ndevices--; + break; + } + } + spin_unlock_irqrestore(&h->lock, flags); + kfree(added); +} + +static inline int device_is_the_same(struct hpsa_scsi_dev_t *dev1, + struct hpsa_scsi_dev_t *dev2) +{ + if ((is_logical_dev_addr_mode(dev1->scsi3addr) || + (dev1->lun != -1 && dev2->lun != -1)) && + dev1->devtype != 0x0C) + return (memcmp(dev1, dev2, sizeof(*dev1)) == 0); + + /* we compare everything except lun and target as these + * are not yet assigned. Compare parts likely + * to differ first + */ + if (memcmp(dev1->scsi3addr, dev2->scsi3addr, + sizeof(dev1->scsi3addr)) != 0) + return 0; + if (memcmp(dev1->device_id, dev2->device_id, + sizeof(dev1->device_id)) != 0) + return 0; + if (memcmp(dev1->model, dev2->model, sizeof(dev1->model)) != 0) + return 0; + if (memcmp(dev1->vendor, dev2->vendor, sizeof(dev1->vendor)) != 0) + return 0; + if (memcmp(dev1->revision, dev2->revision, sizeof(dev1->revision)) != 0) + return 0; + if (dev1->devtype != dev2->devtype) + return 0; + if (dev1->raid_level != dev2->raid_level) + return 0; + if (dev1->bus != dev2->bus) + return 0; + return 1; +} + +/* Find needle in haystack. If exact match found, return DEVICE_SAME, + * and return needle location in *index. If scsi3addr matches, but not + * vendor, model, serial num, etc. return DEVICE_CHANGED, and return needle + * location in *index. If needle not found, return DEVICE_NOT_FOUND. + */ +static int hpsa_scsi_find_entry(struct hpsa_scsi_dev_t *needle, + struct hpsa_scsi_dev_t *haystack[], int haystack_size, + int *index) +{ + int i; +#define DEVICE_NOT_FOUND 0 +#define DEVICE_CHANGED 1 +#define DEVICE_SAME 2 + for (i = 0; i < haystack_size; i++) { + if (SCSI3ADDR_EQ(needle->scsi3addr, haystack[i]->scsi3addr)) { + *index = i; + if (device_is_the_same(needle, haystack[i])) + return DEVICE_SAME; + else + return DEVICE_CHANGED; + } + } + *index = -1; + return DEVICE_NOT_FOUND; +} + +static int adjust_hpsa_scsi_table(struct ctlr_info *h, int hostno, + struct hpsa_scsi_dev_t *sd[], int nsds) +{ + /* sd contains scsi3 addresses and devtypes, and inquiry + * data. This function takes what's in sd to be the current + * reality and updates h->dev[] to reflect that reality. + */ + int i, entry, device_change, changes = 0; + struct hpsa_scsi_dev_t *csd; + unsigned long flags; + struct hpsa_scsi_dev_t **added, **removed; + int nadded, nremoved; + struct Scsi_Host *sh = NULL; + + added = kzalloc(sizeof(*added) * HPSA_MAX_SCSI_DEVS_PER_HBA, + GFP_KERNEL); + removed = kzalloc(sizeof(*removed) * HPSA_MAX_SCSI_DEVS_PER_HBA, + GFP_KERNEL); + + if (!added || !removed) { + dev_warn(&h->pdev->dev, "out of memory in " + "adjust_hpsa_scsi_table\n"); + goto free_and_out; + } + + spin_lock_irqsave(&h->devlock, flags); + + /* find any devices in h->dev[] that are not in + * sd[] and remove them from h->dev[], and for any + * devices which have changed, remove the old device + * info and add the new device info. + */ + i = 0; + nremoved = 0; + nadded = 0; + while (i < h->ndevices) { + csd = h->dev[i]; + device_change = hpsa_scsi_find_entry(csd, sd, nsds, &entry); + if (device_change == DEVICE_NOT_FOUND) { + changes++; + hpsa_scsi_remove_entry(h, hostno, i, + removed, &nremoved); + continue; /* remove ^^^, hence i not incremented */ + } else if (device_change == DEVICE_CHANGED) { + changes++; + hpsa_scsi_remove_entry(h, hostno, i, + removed, &nremoved); + (void) hpsa_scsi_add_entry(h, hostno, sd[entry], + added, &nadded); + /* add can't fail, we just removed one. */ + sd[entry] = NULL; /* prevent it from being freed */ + } + i++; + } + + /* Now, make sure every device listed in sd[] is also + * listed in h->dev[], adding them if they aren't found + */ + + for (i = 0; i < nsds; i++) { + if (!sd[i]) /* if already added above. */ + continue; + device_change = hpsa_scsi_find_entry(sd[i], h->dev, + h->ndevices, &entry); + if (device_change == DEVICE_NOT_FOUND) { + changes++; + if (hpsa_scsi_add_entry(h, hostno, sd[i], + added, &nadded) != 0) + break; + sd[i] = NULL; /* prevent from being freed later. */ + } else if (device_change == DEVICE_CHANGED) { + /* should never happen... */ + changes++; + dev_warn(&h->pdev->dev, + "device unexpectedly changed.\n"); + /* but if it does happen, we just ignore that device */ + } + } + spin_unlock_irqrestore(&h->devlock, flags); + + /* Don't notify scsi mid layer of any changes the first time through + * (or if there are no changes) scsi_scan_host will do it later the + * first time through. + */ + if (hostno == -1 || !changes) + goto free_and_out; + + sh = h->scsi_host; + /* Notify scsi mid layer of any removed devices */ + for (i = 0; i < nremoved; i++) { + struct scsi_device *sdev = + scsi_device_lookup(sh, removed[i]->bus, + removed[i]->target, removed[i]->lun); + if (sdev != NULL) { + scsi_remove_device(sdev); + scsi_device_put(sdev); + } else { + /* We don't expect to get here. + * future cmds to this device will get selection + * timeout as if the device was gone. + */ + dev_warn(&h->pdev->dev, "didn't find c%db%dt%dl%d " + " for removal.", hostno, removed[i]->bus, + removed[i]->target, removed[i]->lun); + } + kfree(removed[i]); + removed[i] = NULL; + } + + /* Notify scsi mid layer of any added devices */ + for (i = 0; i < nadded; i++) { + if (scsi_add_device(sh, added[i]->bus, + added[i]->target, added[i]->lun) == 0) + continue; + dev_warn(&h->pdev->dev, "scsi_add_device c%db%dt%dl%d failed, " + "device not added.\n", hostno, added[i]->bus, + added[i]->target, added[i]->lun); + /* now we have to remove it from h->dev, + * since it didn't get added to scsi mid layer + */ + fixup_botched_add(h, added[i]); + } + +free_and_out: + kfree(added); + kfree(removed); + return 0; +} + +/* + * Lookup bus/target/lun and retrun corresponding struct hpsa_scsi_dev_t * + * Assume's h->devlock is held. + */ +static struct hpsa_scsi_dev_t *lookup_hpsa_scsi_dev(struct ctlr_info *h, + int bus, int target, int lun) +{ + int i; + struct hpsa_scsi_dev_t *sd; + + for (i = 0; i < h->ndevices; i++) { + sd = h->dev[i]; + if (sd->bus == bus && sd->target == target && sd->lun == lun) + return sd; + } + return NULL; +} + +/* link sdev->hostdata to our per-device structure. */ +static int hpsa_slave_alloc(struct scsi_device *sdev) +{ + struct hpsa_scsi_dev_t *sd; + unsigned long flags; + struct ctlr_info *h; + + h = sdev_to_hba(sdev); + spin_lock_irqsave(&h->devlock, flags); + sd = lookup_hpsa_scsi_dev(h, sdev_channel(sdev), + sdev_id(sdev), sdev->lun); + if (sd != NULL) + sdev->hostdata = sd; + spin_unlock_irqrestore(&h->devlock, flags); + return 0; +} + +static void hpsa_slave_destroy(struct scsi_device *sdev) +{ + return; /* nothing to do. */ +} + +static void hpsa_scsi_setup(struct ctlr_info *h) +{ + h->ndevices = 0; + h->scsi_host = NULL; + spin_lock_init(&h->devlock); + return; +} + +static void complete_scsi_command(struct CommandList *cp, + int timeout, __u32 tag) +{ + struct scsi_cmnd *cmd; + struct ctlr_info *h; + struct ErrorInfo *ei; + + unsigned char sense_key; + unsigned char asc; /* additional sense code */ + unsigned char ascq; /* additional sense code qualifier */ + + ei = cp->err_info; + cmd = (struct scsi_cmnd *) cp->scsi_cmd; + h = cp->h; + + scsi_dma_unmap(cmd); /* undo the DMA mappings */ + + cmd->result = (DID_OK << 16); /* host byte */ + cmd->result |= (COMMAND_COMPLETE << 8); /* msg byte */ + cmd->result |= (ei->ScsiStatus << 1); + + /* copy the sense data whether we need to or not. */ + memcpy(cmd->sense_buffer, ei->SenseInfo, + ei->SenseLen > SCSI_SENSE_BUFFERSIZE ? + SCSI_SENSE_BUFFERSIZE : + ei->SenseLen); + scsi_set_resid(cmd, ei->ResidualCnt); + + if (ei->CommandStatus == 0) { + cmd->scsi_done(cmd); + cmd_free(h, cp); + return; + } + + /* an error has occurred */ + switch (ei->CommandStatus) { + + case CMD_TARGET_STATUS: + if (ei->ScsiStatus) { + /* Get sense key */ + sense_key = 0xf & ei->SenseInfo[2]; + /* Get additional sense code */ + asc = ei->SenseInfo[12]; + /* Get addition sense code qualifier */ + ascq = ei->SenseInfo[13]; + } + + if (ei->ScsiStatus == SAM_STAT_CHECK_CONDITION) { + if (check_for_unit_attention(h, cp)) { + cmd->result = DID_SOFT_ERROR << 16; + break; + } + if (sense_key == ILLEGAL_REQUEST) { + /* + * SCSI REPORT_LUNS is commonly unsupported on + * Smart Array. Suppress noisy complaint. + */ + if (cp->Request.CDB[0] == REPORT_LUNS) + break; + + /* If ASC/ASCQ indicate Logical Unit + * Not Supported condition, + */ + if ((asc == 0x25) && (ascq == 0x0)) { + dev_warn(&h->pdev->dev, "cp %p " + "has check condition\n", cp); + break; + } + } + + if (sense_key == NOT_READY) { + /* If Sense is Not Ready, Logical Unit + * Not ready, Manual Intervention + * required + */ + if ((asc == 0x04) && (ascq == 0x03)) { + cmd->result = DID_NO_CONNECT << 16; + dev_warn(&h->pdev->dev, "cp %p " + "has check condition: unit " + "not ready, manual " + "intervention required\n", cp); + break; + } + } + + + /* Must be some other type of check condition */ + dev_warn(&h->pdev->dev, "cp %p has check condition: " + "unknown type: " + "Sense: 0x%x, ASC: 0x%x, ASCQ: 0x%x, " + "Returning result: 0x%x, " + "cmd=[%02x %02x %02x %02x %02x " + "%02x %02x %02x %02x %02x]\n", + cp, sense_key, asc, ascq, + cmd->result, + cmd->cmnd[0], cmd->cmnd[1], + cmd->cmnd[2], cmd->cmnd[3], + cmd->cmnd[4], cmd->cmnd[5], + cmd->cmnd[6], cmd->cmnd[7], + cmd->cmnd[8], cmd->cmnd[9]); + break; + } + + + /* Problem was not a check condition + * Pass it up to the upper layers... + */ + if (ei->ScsiStatus) { + dev_warn(&h->pdev->dev, "cp %p has status 0x%x " + "Sense: 0x%x, ASC: 0x%x, ASCQ: 0x%x, " + "Returning result: 0x%x\n", + cp, ei->ScsiStatus, + sense_key, asc, ascq, + cmd->result); + } else { /* scsi status is zero??? How??? */ + dev_warn(&h->pdev->dev, "cp %p SCSI status was 0. " + "Returning no connection.\n", cp), + + /* Ordinarily, this case should never happen, + * but there is a bug in some released firmware + * revisions that allows it to happen if, for + * example, a 4100 backplane loses power and + * the tape drive is in it. We assume that + * it's a fatal error of some kind because we + * can't show that it wasn't. We will make it + * look like selection timeout since that is + * the most common reason for this to occur, + * and it's severe enough. + */ + + cmd->result = DID_NO_CONNECT << 16; + } + break; + + case CMD_DATA_UNDERRUN: /* let mid layer handle it. */ + break; + case CMD_DATA_OVERRUN: + dev_warn(&h->pdev->dev, "cp %p has" + " completed with data overrun " + "reported\n", cp); + break; + case CMD_INVALID: { + /* print_bytes(cp, sizeof(*cp), 1, 0); + print_cmd(cp); */ + /* We get CMD_INVALID if you address a non-existent device + * instead of a selection timeout (no response). You will + * see this if you yank out a drive, then try to access it. + * This is kind of a shame because it means that any other + * CMD_INVALID (e.g. driver bug) will get interpreted as a + * missing target. */ + cmd->result = DID_NO_CONNECT << 16; + } + break; + case CMD_PROTOCOL_ERR: + dev_warn(&h->pdev->dev, "cp %p has " + "protocol error \n", cp); + break; + case CMD_HARDWARE_ERR: + cmd->result = DID_ERROR << 16; + dev_warn(&h->pdev->dev, "cp %p had hardware error\n", cp); + break; + case CMD_CONNECTION_LOST: + cmd->result = DID_ERROR << 16; + dev_warn(&h->pdev->dev, "cp %p had connection lost\n", cp); + break; + case CMD_ABORTED: + cmd->result = DID_ABORT << 16; + dev_warn(&h->pdev->dev, "cp %p was aborted with status 0x%x\n", + cp, ei->ScsiStatus); + break; + case CMD_ABORT_FAILED: + cmd->result = DID_ERROR << 16; + dev_warn(&h->pdev->dev, "cp %p reports abort failed\n", cp); + break; + case CMD_UNSOLICITED_ABORT: + cmd->result = DID_ABORT << 16; + dev_warn(&h->pdev->dev, "cp %p aborted do to an unsolicited " + "abort\n", cp); + break; + case CMD_TIMEOUT: + cmd->result = DID_TIME_OUT << 16; + dev_warn(&h->pdev->dev, "cp %p timedout\n", cp); + break; + default: + cmd->result = DID_ERROR << 16; + dev_warn(&h->pdev->dev, "cp %p returned unknown status %x\n", + cp, ei->CommandStatus); + } + cmd->scsi_done(cmd); + cmd_free(h, cp); +} + +static int hpsa_scsi_detect(struct ctlr_info *h) +{ + struct Scsi_Host *sh; + int error; + + sh = scsi_host_alloc(&hpsa_driver_template, sizeof(h)); + if (sh == NULL) + goto fail; + + sh->io_port = 0; + sh->n_io_port = 0; + sh->this_id = -1; + sh->max_channel = 3; + sh->max_cmd_len = MAX_COMMAND_SIZE; + sh->max_lun = HPSA_MAX_LUN; + sh->max_id = HPSA_MAX_LUN; + h->scsi_host = sh; + sh->hostdata[0] = (unsigned long) h; + sh->irq = h->intr[SIMPLE_MODE_INT]; + sh->unique_id = sh->irq; + error = scsi_add_host(sh, &h->pdev->dev); + if (error) + goto fail_host_put; + scsi_scan_host(sh); + return 0; + + fail_host_put: + dev_err(&h->pdev->dev, "hpsa_scsi_detect: scsi_add_host" + " failed for controller %d\n", h->ctlr); + scsi_host_put(sh); + return -1; + fail: + dev_err(&h->pdev->dev, "hpsa_scsi_detect: scsi_host_alloc" + " failed for controller %d\n", h->ctlr); + return -1; +} + +static void hpsa_pci_unmap(struct pci_dev *pdev, + struct CommandList *c, int sg_used, int data_direction) +{ + int i; + union u64bit addr64; + + for (i = 0; i < sg_used; i++) { + addr64.val32.lower = c->SG[i].Addr.lower; + addr64.val32.upper = c->SG[i].Addr.upper; + pci_unmap_single(pdev, (dma_addr_t) addr64.val, c->SG[i].Len, + data_direction); + } +} + +static void hpsa_map_one(struct pci_dev *pdev, + struct CommandList *cp, + unsigned char *buf, + size_t buflen, + int data_direction) +{ + __u64 addr64; + + if (buflen == 0 || data_direction == PCI_DMA_NONE) { + cp->Header.SGList = 0; + cp->Header.SGTotal = 0; + return; + } + + addr64 = (__u64) pci_map_single(pdev, buf, buflen, data_direction); + cp->SG[0].Addr.lower = + (__u32) (addr64 & (__u64) 0x00000000FFFFFFFF); + cp->SG[0].Addr.upper = + (__u32) ((addr64 >> 32) & (__u64) 0x00000000FFFFFFFF); + cp->SG[0].Len = buflen; + cp->Header.SGList = (__u8) 1; /* no. SGs contig in this cmd */ + cp->Header.SGTotal = (__u16) 1; /* total sgs in this cmd list */ +} + +static inline void hpsa_scsi_do_simple_cmd_core(struct ctlr_info *h, + struct CommandList *c) +{ + DECLARE_COMPLETION_ONSTACK(wait); + + c->waiting = &wait; + enqueue_cmd_and_start_io(h, c); + wait_for_completion(&wait); +} + +static void hpsa_scsi_do_simple_cmd_with_retry(struct ctlr_info *h, + struct CommandList *c, int data_direction) +{ + int retry_count = 0; + + do { + memset(c->err_info, 0, sizeof(c->err_info)); + hpsa_scsi_do_simple_cmd_core(h, c); + retry_count++; + } while (check_for_unit_attention(h, c) && retry_count <= 3); + hpsa_pci_unmap(h->pdev, c, 1, data_direction); +} + +static void hpsa_scsi_interpret_error(struct CommandList *cp) +{ + struct ErrorInfo *ei; + struct device *d = &cp->h->pdev->dev; + + ei = cp->err_info; + switch (ei->CommandStatus) { + case CMD_TARGET_STATUS: + dev_warn(d, "cmd %p has completed with errors\n", cp); + dev_warn(d, "cmd %p has SCSI Status = %x\n", cp, + ei->ScsiStatus); + if (ei->ScsiStatus == 0) + dev_warn(d, "SCSI status is abnormally zero. " + "(probably indicates selection timeout " + "reported incorrectly due to a known " + "firmware bug, circa July, 2001.)\n"); + break; + case CMD_DATA_UNDERRUN: /* let mid layer handle it. */ + dev_info(d, "UNDERRUN\n"); + break; + case CMD_DATA_OVERRUN: + dev_warn(d, "cp %p has completed with data overrun\n", cp); + break; + case CMD_INVALID: { + /* controller unfortunately reports SCSI passthru's + * to non-existent targets as invalid commands. + */ + dev_warn(d, "cp %p is reported invalid (probably means " + "target device no longer present)\n", cp); + /* print_bytes((unsigned char *) cp, sizeof(*cp), 1, 0); + print_cmd(cp); */ + } + break; + case CMD_PROTOCOL_ERR: + dev_warn(d, "cp %p has protocol error \n", cp); + break; + case CMD_HARDWARE_ERR: + /* cmd->result = DID_ERROR << 16; */ + dev_warn(d, "cp %p had hardware error\n", cp); + break; + case CMD_CONNECTION_LOST: + dev_warn(d, "cp %p had connection lost\n", cp); + break; + case CMD_ABORTED: + dev_warn(d, "cp %p was aborted\n", cp); + break; + case CMD_ABORT_FAILED: + dev_warn(d, "cp %p reports abort failed\n", cp); + break; + case CMD_UNSOLICITED_ABORT: + dev_warn(d, "cp %p aborted due to an unsolicited abort\n", cp); + break; + case CMD_TIMEOUT: + dev_warn(d, "cp %p timed out\n", cp); + break; + default: + dev_warn(d, "cp %p returned unknown status %x\n", cp, + ei->CommandStatus); + } +} + +static int hpsa_scsi_do_inquiry(struct ctlr_info *h, unsigned char *scsi3addr, + unsigned char page, unsigned char *buf, + unsigned char bufsize) +{ + int rc = IO_OK; + struct CommandList *c; + struct ErrorInfo *ei; + + c = cmd_special_alloc(h); + + if (c == NULL) { /* trouble... */ + dev_warn(&h->pdev->dev, "cmd_special_alloc returned NULL!\n"); + return -1; + } + + fill_cmd(c, HPSA_INQUIRY, h, buf, bufsize, page, scsi3addr, TYPE_CMD); + hpsa_scsi_do_simple_cmd_with_retry(h, c, PCI_DMA_FROMDEVICE); + ei = c->err_info; + if (ei->CommandStatus != 0 && ei->CommandStatus != CMD_DATA_UNDERRUN) { + hpsa_scsi_interpret_error(c); + rc = -1; + } + cmd_special_free(h, c); + return rc; +} + +static int hpsa_send_reset(struct ctlr_info *h, unsigned char *scsi3addr) +{ + int rc = IO_OK; + struct CommandList *c; + struct ErrorInfo *ei; + + c = cmd_special_alloc(h); + + if (c == NULL) { /* trouble... */ + dev_warn(&h->pdev->dev, "cmd_special_alloc returned NULL!\n"); + return -1; + } + + fill_cmd(c, HPSA_DEVICE_RESET_MSG, h, NULL, 0, 0, scsi3addr, TYPE_MSG); + hpsa_scsi_do_simple_cmd_core(h, c); + /* no unmap needed here because no data xfer. */ + + ei = c->err_info; + if (ei->CommandStatus != 0) { + hpsa_scsi_interpret_error(c); + rc = -1; + } + cmd_special_free(h, c); + return rc; +} + +static void hpsa_get_raid_level(struct ctlr_info *h, + unsigned char *scsi3addr, unsigned char *raid_level) +{ + int rc; + unsigned char *buf; + + *raid_level = RAID_UNKNOWN; + buf = kzalloc(64, GFP_KERNEL); + if (!buf) + return; + rc = hpsa_scsi_do_inquiry(h, scsi3addr, 0xC1, buf, 64); + if (rc == 0) + *raid_level = buf[8]; + if (*raid_level > RAID_UNKNOWN) + *raid_level = RAID_UNKNOWN; + kfree(buf); + return; +} + +/* Get the device id from inquiry page 0x83 */ +static int hpsa_get_device_id(struct ctlr_info *h, unsigned char *scsi3addr, + unsigned char *device_id, int buflen) +{ + int rc; + unsigned char *buf; + + if (buflen > 16) + buflen = 16; + buf = kzalloc(64, GFP_KERNEL); + if (!buf) + return -1; + rc = hpsa_scsi_do_inquiry(h, scsi3addr, 0x83, buf, 64); + if (rc == 0) + memcpy(device_id, &buf[8], buflen); + kfree(buf); + return rc != 0; +} + +static int hpsa_scsi_do_report_luns(struct ctlr_info *h, int logical, + struct ReportLUNdata *buf, int bufsize, + int extended_response) +{ + int rc = IO_OK; + struct CommandList *c; + unsigned char scsi3addr[8]; + struct ErrorInfo *ei; + + c = cmd_special_alloc(h); + if (c == NULL) { /* trouble... */ + dev_err(&h->pdev->dev, "cmd_special_alloc returned NULL!\n"); + return -1; + } + + memset(&scsi3addr[0], 0, 8); /* address the controller */ + + fill_cmd(c, logical ? HPSA_REPORT_LOG : HPSA_REPORT_PHYS, h, + buf, bufsize, 0, scsi3addr, TYPE_CMD); + if (extended_response) + c->Request.CDB[1] = extended_response; + hpsa_scsi_do_simple_cmd_with_retry(h, c, PCI_DMA_FROMDEVICE); + ei = c->err_info; + if (ei->CommandStatus != 0 && + ei->CommandStatus != CMD_DATA_UNDERRUN) { + hpsa_scsi_interpret_error(c); + rc = -1; + } + cmd_special_free(h, c); + return rc; +} + +static inline int hpsa_scsi_do_report_phys_luns(struct ctlr_info *h, + struct ReportLUNdata *buf, + int bufsize, int extended_response) +{ + return hpsa_scsi_do_report_luns(h, 0, buf, bufsize, extended_response); +} + +static inline int hpsa_scsi_do_report_log_luns(struct ctlr_info *h, + struct ReportLUNdata *buf, int bufsize) +{ + return hpsa_scsi_do_report_luns(h, 1, buf, bufsize, 0); +} + +static inline void hpsa_set_bus_target_lun(struct hpsa_scsi_dev_t *device, + int bus, int target, int lun) +{ + device->bus = bus; + device->target = target; + device->lun = lun; +} + +static int hpsa_update_device_info(struct ctlr_info *h, + unsigned char scsi3addr[], struct hpsa_scsi_dev_t *this_device) +{ +#define OBDR_TAPE_INQ_SIZE 49 + unsigned char *inq_buff = NULL; + + inq_buff = kmalloc(OBDR_TAPE_INQ_SIZE, GFP_KERNEL); + if (!inq_buff) + goto bail_out; + + memset(inq_buff, 0, OBDR_TAPE_INQ_SIZE); + /* Do an inquiry to the device to see what it is. */ + if (hpsa_scsi_do_inquiry(h, scsi3addr, 0, inq_buff, + (unsigned char) OBDR_TAPE_INQ_SIZE) != 0) { + /* Inquiry failed (msg printed already) */ + dev_err(&h->pdev->dev, + "hpsa_update_device_info: inquiry failed\n"); + goto bail_out; + } + + /* As a side effect, record the firmware version number + * if we happen to be talking to the RAID controller. + */ + if (is_hba_lunid(scsi3addr)) + memcpy(h->firm_ver, &inq_buff[32], 4); + + this_device->devtype = (inq_buff[0] & 0x1f); + memcpy(this_device->scsi3addr, scsi3addr, 8); + memcpy(this_device->vendor, &inq_buff[8], + sizeof(this_device->vendor)); + memcpy(this_device->model, &inq_buff[16], + sizeof(this_device->model)); + memcpy(this_device->revision, &inq_buff[32], + sizeof(this_device->revision)); + memset(this_device->device_id, 0, + sizeof(this_device->device_id)); + hpsa_get_device_id(h, scsi3addr, this_device->device_id, + sizeof(this_device->device_id)); + + if (this_device->devtype == TYPE_DISK && + is_logical_dev_addr_mode(scsi3addr)) + hpsa_get_raid_level(h, scsi3addr, &this_device->raid_level); + else + this_device->raid_level = RAID_UNKNOWN; + + kfree(inq_buff); + return 0; + +bail_out: + kfree(inq_buff); + return 1; +} + +static unsigned char *msa2xxx_model[] = { + "MSA2012", + "MSA2024", + "MSA2312", + "MSA2324", + NULL, +}; + +static int is_msa2xxx(struct ctlr_info *h, struct hpsa_scsi_dev_t *device) +{ + int i; + + for (i = 0; msa2xxx_model[i]; i++) + if (strncmp(device->model, msa2xxx_model[i], + strlen(msa2xxx_model[i])) == 0) + return 1; + return 0; +} + +/* Helper function to assign bus, target, lun mapping of devices. + * Puts non-msa2xxx logical volumes on bus 0, msa2xxx logical + * volumes on bus 1, physical devices on bus 2. and the hba on bus 3. + * Logical drive target and lun are assigned at this time, but + * physical device lun and target assignment are deferred (assigned + * in hpsa_find_target_lun, called by hpsa_scsi_add_entry.) + */ +static void figure_bus_target_lun(struct ctlr_info *h, + __u8 *lunaddrbytes, int *bus, int *target, int *lun, + struct hpsa_scsi_dev_t *device) +{ + + __u32 lunid; + + if (is_logical_dev_addr_mode(lunaddrbytes)) { + /* logical device */ + memcpy(&lunid, lunaddrbytes, sizeof(lunid)); + lunid = le32_to_cpu(lunid); + + if (is_msa2xxx(h, device)) { + *bus = 1; + *target = (lunid >> 16) & 0x3fff; + *lun = lunid & 0x00ff; + } else { + *bus = 0; + *lun = 0; + *target = lunid & 0x3fff; + } + } else { + /* physical device */ + if (is_hba_lunid(lunaddrbytes)) + *bus = 3; + else + *bus = 2; + *target = -1; + *lun = -1; /* we will fill these in later. */ + } +} + +/* + * If there is no lun 0 on a target, linux won't find any devices. + * For the MSA2xxx boxes, we have to manually detect the enclosure + * which is at lun zero, as CCISS_REPORT_PHYSICAL_LUNS doesn't report + * it for some reason. *tmpdevice is the target we're adding, + * this_device is a pointer into the current element of currentsd[] + * that we're building up in update_scsi_devices(), below. + * lunzerobits is a bitmap that tracks which targets already have a + * lun 0 assigned. + * Returns 1 if an enclosure was added, 0 if not. + */ +static int add_msa2xxx_enclosure_device(struct ctlr_info *h, + struct hpsa_scsi_dev_t *tmpdevice, + struct hpsa_scsi_dev_t *this_device, __u8 *lunaddrbytes, + int bus, int target, int lun, unsigned long lunzerobits[], + int *nmsa2xxx_enclosures) +{ + unsigned char scsi3addr[8]; + + if (test_bit(target, lunzerobits)) + return 0; /* There is already a lun 0 on this target. */ + + if (!is_logical_dev_addr_mode(lunaddrbytes)) + return 0; /* It's the logical targets that may lack lun 0. */ + + if (!is_msa2xxx(h, tmpdevice)) + return 0; /* It's only the MSA2xxx that have this problem. */ + + if (lun == 0) /* if lun is 0, then obviously we have a lun 0. */ + return 0; + + if (is_hba_lunid(scsi3addr)) + return 0; /* Don't add the RAID controller here. */ + +#define MAX_MSA2XXX_ENCLOSURES 32 + if (*nmsa2xxx_enclosures >= MAX_MSA2XXX_ENCLOSURES) { + dev_warn(&h->pdev->dev, "Maximum number of MSA2XXX " + "enclosures exceeded. Check your hardware " + "configuration."); + return 0; + } + + memset(scsi3addr, 0, 8); + scsi3addr[3] = target; + if (hpsa_update_device_info(h, scsi3addr, this_device)) + return 0; + (*nmsa2xxx_enclosures)++; + hpsa_set_bus_target_lun(this_device, bus, target, 0); + set_bit(target, lunzerobits); + return 1; +} + +/* + * Do CISS_REPORT_PHYS and CISS_REPORT_LOG. Data is returned in physdev, + * logdev. The number of luns in physdev and logdev are returned in + * *nphysicals and *nlogicals, respectively. + * Returns 0 on success, -1 otherwise. + */ +static int hpsa_gather_lun_info(struct ctlr_info *h, + int reportlunsize, + struct ReportLUNdata *physdev, __u32 *nphysicals, + struct ReportLUNdata *logdev, __u32 *nlogicals) +{ + if (hpsa_scsi_do_report_phys_luns(h, physdev, reportlunsize, 0)) { + dev_err(&h->pdev->dev, "report physical LUNs failed.\n"); + return -1; + } + memcpy(nphysicals, &physdev->LUNListLength[0], sizeof(*nphysicals)); + *nphysicals = be32_to_cpu(*nphysicals) / 8; +#ifdef DEBUG + dev_info(&h->pdev->dev, "number of physical luns is %d\n", *nphysicals); +#endif + if (*nphysicals > HPSA_MAX_PHYS_LUN) { + dev_warn(&h->pdev->dev, "maximum physical LUNs (%d) exceeded." + " %d LUNs ignored.\n", HPSA_MAX_PHYS_LUN, + *nphysicals - HPSA_MAX_PHYS_LUN); + *nphysicals = HPSA_MAX_PHYS_LUN; + } + if (hpsa_scsi_do_report_log_luns(h, logdev, reportlunsize)) { + dev_err(&h->pdev->dev, "report logical LUNs failed.\n"); + return -1; + } + memcpy(nlogicals, &logdev->LUNListLength[0], sizeof(*nlogicals)); + *nlogicals = be32_to_cpu(*nlogicals) / 8; +#ifdef DEBUG + dev_info(&h->pdev->dev, "number of logical luns is %d\n", *nlogicals); +#endif + /* Reject Logicals in excess of our max capability. */ + if (*nlogicals > HPSA_MAX_LUN) { + dev_warn(&h->pdev->dev, + "maximum logical LUNs (%d) exceeded. " + "%d LUNs ignored.\n", HPSA_MAX_LUN, + *nlogicals - HPSA_MAX_LUN); + *nlogicals = HPSA_MAX_LUN; + } + if (*nlogicals + *nphysicals > HPSA_MAX_PHYS_LUN) { + dev_warn(&h->pdev->dev, + "maximum logical + physical LUNs (%d) exceeded. " + "%d LUNs ignored.\n", HPSA_MAX_PHYS_LUN, + *nphysicals + *nlogicals - HPSA_MAX_PHYS_LUN); + *nlogicals = HPSA_MAX_PHYS_LUN - *nphysicals; + } + return 0; +} + +static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno) +{ + /* the idea here is we could get notified + * that some devices have changed, so we do a report + * physical luns and report logical luns cmd, and adjust + * our list of devices accordingly. + * + * The scsi3addr's of devices won't change so long as the + * adapter is not reset. That means we can rescan and + * tell which devices we already know about, vs. new + * devices, vs. disappearing devices. + */ + struct ReportLUNdata *physdev_list = NULL; + struct ReportLUNdata *logdev_list = NULL; + unsigned char *inq_buff = NULL; + __u32 nphysicals = 0; + __u32 nlogicals = 0; + __u32 ndev_allocated = 0; + struct hpsa_scsi_dev_t **currentsd, *this_device, *tmpdevice; + int ncurrent = 0; + int reportlunsize = sizeof(*physdev_list) + HPSA_MAX_PHYS_LUN * 8; + int i, nmsa2xxx_enclosures, ndevs_to_allocate; + int bus, target, lun; + DECLARE_BITMAP(lunzerobits, HPSA_MAX_TARGETS_PER_CTLR); + + currentsd = kzalloc(sizeof(*currentsd) * HPSA_MAX_SCSI_DEVS_PER_HBA, + GFP_KERNEL); + physdev_list = kzalloc(reportlunsize, GFP_KERNEL); + logdev_list = kzalloc(reportlunsize, GFP_KERNEL); + inq_buff = kmalloc(OBDR_TAPE_INQ_SIZE, GFP_KERNEL); + tmpdevice = kzalloc(sizeof(*tmpdevice), GFP_KERNEL); + + if (!currentsd || !physdev_list || !logdev_list || + !inq_buff || !tmpdevice) { + dev_err(&h->pdev->dev, "out of memory\n"); + goto out; + } + memset(lunzerobits, 0, sizeof(lunzerobits)); + + if (hpsa_gather_lun_info(h, reportlunsize, physdev_list, &nphysicals, + logdev_list, &nlogicals)) + goto out; + + /* We might see up to 32 MSA2xxx enclosures, actually 8 of them + * but each of them 4 times through different paths. The plus 1 + * is for the RAID controller. + */ + ndevs_to_allocate = nphysicals + nlogicals + MAX_MSA2XXX_ENCLOSURES + 1; + + /* Allocate the per device structures */ + for (i = 0; i < ndevs_to_allocate; i++) { + currentsd[i] = kzalloc(sizeof(*currentsd[i]), GFP_KERNEL); + if (!currentsd[i]) { + dev_warn(&h->pdev->dev, "out of memory at %s:%d\n", + __FILE__, __LINE__); + goto out; + } + ndev_allocated++; + } + + /* adjust our table of devices */ + nmsa2xxx_enclosures = 0; + for (i = 0; i < nphysicals + nlogicals + 1; i++) { + __u8 *lunaddrbytes; + + /* Figure out where the LUN ID info is coming from */ + if (i < nphysicals) + lunaddrbytes = &physdev_list->LUN[i][0]; + else + if (i < nphysicals + nlogicals) + lunaddrbytes = + &logdev_list->LUN[i-nphysicals][0]; + else /* jam in the RAID controller at the end */ + lunaddrbytes = RAID_CTLR_LUNID; + + /* skip masked physical devices. */ + if (lunaddrbytes[3] & 0xC0 && i < nphysicals) + continue; + + /* Get device type, vendor, model, device id */ + if (hpsa_update_device_info(h, lunaddrbytes, tmpdevice)) + continue; /* skip it if we can't talk to it. */ + figure_bus_target_lun(h, lunaddrbytes, &bus, &target, &lun, + tmpdevice); + this_device = currentsd[ncurrent]; + + /* + * For the msa2xxx boxes, we have to insert a LUN 0 which + * doesn't show up in CCISS_REPORT_PHYSICAL data, but there + * is nonetheless an enclosure device there. We have to + * present that otherwise linux won't find anything if + * there is no lun 0. + */ + if (add_msa2xxx_enclosure_device(h, tmpdevice, this_device, + lunaddrbytes, bus, target, lun, lunzerobits, + &nmsa2xxx_enclosures)) { + ncurrent++; + this_device = currentsd[ncurrent]; + } + + *this_device = *tmpdevice; + hpsa_set_bus_target_lun(this_device, bus, target, lun); + + switch (this_device->devtype) { + case TYPE_ROM: { + /* We don't *really* support actual CD-ROM devices, + * just "One Button Disaster Recovery" tape drive + * which temporarily pretends to be a CD-ROM drive. + * So we check that the device is really an OBDR tape + * device by checking for "$DR-10" in bytes 43-48 of + * the inquiry data. + */ + char obdr_sig[7]; +#define OBDR_TAPE_SIG "$DR-10" + strncpy(obdr_sig, &inq_buff[43], 6); + obdr_sig[6] = '\0'; + if (strncmp(obdr_sig, OBDR_TAPE_SIG, 6) != 0) + /* Not OBDR device, ignore it. */ + break; + } + ncurrent++; + break; + case TYPE_DISK: + if (i < nphysicals) + break; + ncurrent++; + break; + case TYPE_TAPE: + case TYPE_MEDIUM_CHANGER: + ncurrent++; + break; + case TYPE_RAID: + /* Only present the Smartarray HBA as a RAID controller. + * If it's a RAID controller other than the HBA itself + * (an external RAID controller, MSA500 or similar) + * don't present it. + */ + if (!is_hba_lunid(lunaddrbytes)) + break; + ncurrent++; + break; + default: + break; + } + if (ncurrent >= HPSA_MAX_SCSI_DEVS_PER_HBA) + break; + } + adjust_hpsa_scsi_table(h, hostno, currentsd, ncurrent); +out: + kfree(tmpdevice); + for (i = 0; i < ndev_allocated; i++) + kfree(currentsd[i]); + kfree(currentsd); + kfree(inq_buff); + kfree(physdev_list); + kfree(logdev_list); + return; +} + +/* hpsa_scatter_gather takes a struct scsi_cmnd, (cmd), and does the pci + * dma mapping and fills in the scatter gather entries of the + * hpsa command, cp. + */ +static int hpsa_scatter_gather(struct pci_dev *pdev, + struct CommandList *cp, + struct scsi_cmnd *cmd) +{ + unsigned int len; + struct scatterlist *sg; + __u64 addr64; + int use_sg, i; + + BUG_ON(scsi_sg_count(cmd) > MAXSGENTRIES); + + use_sg = scsi_dma_map(cmd); + if (use_sg < 0) + return use_sg; + + if (!use_sg) + goto sglist_finished; + + scsi_for_each_sg(cmd, sg, use_sg, i) { + addr64 = (__u64) sg_dma_address(sg); + len = sg_dma_len(sg); + cp->SG[i].Addr.lower = + (__u32) (addr64 & (__u64) 0x00000000FFFFFFFF); + cp->SG[i].Addr.upper = + (__u32) ((addr64 >> 32) & (__u64) 0x00000000FFFFFFFF); + cp->SG[i].Len = len; + cp->SG[i].Ext = 0; /* we are not chaining */ + } + +sglist_finished: + + cp->Header.SGList = (__u8) use_sg; /* no. SGs contig in this cmd */ + cp->Header.SGTotal = (__u16) use_sg; /* total sgs in this cmd list */ + return 0; +} + + +static int hpsa_scsi_queue_command(struct scsi_cmnd *cmd, + void (*done)(struct scsi_cmnd *)) +{ + struct ctlr_info *h; + struct hpsa_scsi_dev_t *dev; + unsigned char scsi3addr[8]; + struct CommandList *c; + unsigned long flags; + + /* Get the ptr to our adapter structure out of cmd->host. */ + h = sdev_to_hba(cmd->device); + dev = cmd->device->hostdata; + if (!dev) { + cmd->result = DID_NO_CONNECT << 16; + done(cmd); + return 0; + } + memcpy(scsi3addr, dev->scsi3addr, sizeof(scsi3addr)); + + /* Need a lock as this is being allocated from the pool */ + spin_lock_irqsave(&h->lock, flags); + c = cmd_alloc(h); + spin_unlock_irqrestore(&h->lock, flags); + if (c == NULL) { /* trouble... */ + dev_err(&h->pdev->dev, "cmd_alloc returned NULL!\n"); + return SCSI_MLQUEUE_HOST_BUSY; + } + + /* Fill in the command list header */ + + cmd->scsi_done = done; /* save this for use by completion code */ + + /* save c in case we have to abort it */ + cmd->host_scribble = (unsigned char *) c; + + c->cmd_type = CMD_SCSI; + c->scsi_cmd = cmd; + c->Header.ReplyQueue = 0; /* unused in simple mode */ + memcpy(&c->Header.LUN.LunAddrBytes[0], &scsi3addr[0], 8); + c->Header.Tag.lower = c->busaddr; /* Use k. address of cmd as tag */ + + /* Fill in the request block... */ + + c->Request.Timeout = 0; + memset(c->Request.CDB, 0, sizeof(c->Request.CDB)); + BUG_ON(cmd->cmd_len > sizeof(c->Request.CDB)); + c->Request.CDBLen = cmd->cmd_len; + memcpy(c->Request.CDB, cmd->cmnd, cmd->cmd_len); + c->Request.Type.Type = TYPE_CMD; + c->Request.Type.Attribute = ATTR_SIMPLE; + switch (cmd->sc_data_direction) { + case DMA_TO_DEVICE: + c->Request.Type.Direction = XFER_WRITE; + break; + case DMA_FROM_DEVICE: + c->Request.Type.Direction = XFER_READ; + break; + case DMA_NONE: + c->Request.Type.Direction = XFER_NONE; + break; + case DMA_BIDIRECTIONAL: + /* This can happen if a buggy application does a scsi passthru + * and sets both inlen and outlen to non-zero. ( see + * ../scsi/scsi_ioctl.c:scsi_ioctl_send_command() ) + */ + + c->Request.Type.Direction = XFER_RSVD; + /* This is technically wrong, and hpsa controllers should + * reject it with CMD_INVALID, which is the most correct + * response, but non-fibre backends appear to let it + * slide by, and give the same results as if this field + * were set correctly. Either way is acceptable for + * our purposes here. + */ + + break; + + default: + dev_err(&h->pdev->dev, "unknown data direction: %d\n", + cmd->sc_data_direction); + BUG(); + break; + } + + if (hpsa_scatter_gather(h->pdev, c, cmd) < 0) { /* Fill SG list */ + cmd_free(h, c); + return SCSI_MLQUEUE_HOST_BUSY; + } + enqueue_cmd_and_start_io(h, c); + /* the cmd'll come back via intr handler in complete_scsi_command() */ + return 0; +} + +static void hpsa_unregister_scsi(struct ctlr_info *h) +{ + /* we are being forcibly unloaded, and may not refuse. */ + scsi_remove_host(h->scsi_host); + scsi_host_put(h->scsi_host); + h->scsi_host = NULL; +} + +static int hpsa_register_scsi(struct ctlr_info *h) +{ + int rc; + + hpsa_update_scsi_devices(h, -1); + rc = hpsa_scsi_detect(h); + if (rc != 0) + dev_err(&h->pdev->dev, "hpsa_register_scsi: failed" + " hpsa_scsi_detect(), rc is %d\n", rc); + return rc; +} + +static int wait_for_device_to_become_ready(struct ctlr_info *h, + unsigned char lunaddr[]) +{ + int rc = 0; + int count = 0; + int waittime = 1; /* seconds */ + struct CommandList *c; + + c = cmd_special_alloc(h); + if (!c) { + dev_warn(&h->pdev->dev, "out of memory in " + "wait_for_device_to_become_ready.\n"); + return IO_ERROR; + } + + /* Send test unit ready until device ready, or give up. */ + while (count < HPSA_TUR_RETRY_LIMIT) { + + /* Wait for a bit. do this first, because if we send + * the TUR right away, the reset will just abort it. + */ + msleep(1000 * waittime); + count++; + + /* Increase wait time with each try, up to a point. */ + if (waittime < HPSA_MAX_WAIT_INTERVAL_SECS) + waittime = waittime * 2; + + /* Send the Test Unit Ready */ + fill_cmd(c, TEST_UNIT_READY, h, NULL, 0, 0, lunaddr, TYPE_CMD); + hpsa_scsi_do_simple_cmd_core(h, c); + /* no unmap needed here because no data xfer. */ + + if (c->err_info->CommandStatus == CMD_SUCCESS) + break; + + if (c->err_info->CommandStatus == CMD_TARGET_STATUS && + c->err_info->ScsiStatus == SAM_STAT_CHECK_CONDITION && + (c->err_info->SenseInfo[2] == NO_SENSE || + c->err_info->SenseInfo[2] == UNIT_ATTENTION)) + break; + + dev_warn(&h->pdev->dev, "waiting %d secs " + "for device to become ready.\n", waittime); + rc = 1; /* device not ready. */ + } + + if (rc) + dev_warn(&h->pdev->dev, "giving up on device.\n"); + else + dev_warn(&h->pdev->dev, "device is ready.\n"); + + cmd_special_free(h, c); + return rc; +} + +/* Need at least one of these error handlers to keep ../scsi/hosts.c from + * complaining. Doing a host- or bus-reset can't do anything good here. + */ +static int hpsa_eh_device_reset_handler(struct scsi_cmnd *scsicmd) +{ + int rc; + struct ctlr_info *h; + struct hpsa_scsi_dev_t *dev; + + /* find the controller to which the command to be aborted was sent */ + h = sdev_to_hba(scsicmd->device); + if (h == NULL) /* paranoia */ + return FAILED; + dev_warn(&h->pdev->dev, "resetting drive\n"); + + dev = scsicmd->device->hostdata; + if (!dev) { + dev_err(&h->pdev->dev, "hpsa_eh_device_reset_handler: " + "device lookup failed.\n"); + return FAILED; + } + /* send a reset to the SCSI LUN which the command was sent to */ + rc = hpsa_send_reset(h, dev->scsi3addr); + if (rc == 0 && wait_for_device_to_become_ready(h, dev->scsi3addr) == 0) + return SUCCESS; + + dev_warn(&h->pdev->dev, "resetting device failed.\n"); + return FAILED; +} + +/* + * For operations that cannot sleep, a command block is allocated at init, + * and managed by cmd_alloc() and cmd_free() using a simple bitmap to track + * which ones are free or in use. Lock must be held when calling this. + * cmd_free() is the complement. + */ +static struct CommandList *cmd_alloc(struct ctlr_info *h) +{ + struct CommandList *c; + int i; + union u64bit temp64; + dma_addr_t cmd_dma_handle, err_dma_handle; + + do { + i = find_first_zero_bit(h->cmd_pool_bits, h->nr_cmds); + if (i == h->nr_cmds) + return NULL; + } while (test_and_set_bit + (i & (BITS_PER_LONG - 1), + h->cmd_pool_bits + (i / BITS_PER_LONG)) != 0); + c = h->cmd_pool + i; + memset(c, 0, sizeof(*c)); + cmd_dma_handle = h->cmd_pool_dhandle + + i * sizeof(*c); + c->err_info = h->errinfo_pool + i; + memset(c->err_info, 0, sizeof(*c->err_info)); + err_dma_handle = h->errinfo_pool_dhandle + + i * sizeof(*c->err_info); + h->nr_allocs++; + + c->cmdindex = i; + + INIT_HLIST_NODE(&c->list); + c->busaddr = (__u32) cmd_dma_handle; + temp64.val = (__u64) err_dma_handle; + c->ErrDesc.Addr.lower = temp64.val32.lower; + c->ErrDesc.Addr.upper = temp64.val32.upper; + c->ErrDesc.Len = sizeof(*c->err_info); + + c->h = h; + return c; +} + +/* For operations that can wait for kmalloc to possibly sleep, + * this routine can be called. Lock need not be held to call + * cmd_special_alloc. cmd_special_free() is the complement. + */ +static struct CommandList *cmd_special_alloc(struct ctlr_info *h) +{ + struct CommandList *c; + union u64bit temp64; + dma_addr_t cmd_dma_handle, err_dma_handle; + + c = pci_alloc_consistent(h->pdev, sizeof(*c), &cmd_dma_handle); + if (c == NULL) + return NULL; + memset(c, 0, sizeof(*c)); + + c->cmdindex = -1; + + c->err_info = pci_alloc_consistent(h->pdev, sizeof(*c->err_info), + &err_dma_handle); + + if (c->err_info == NULL) { + pci_free_consistent(h->pdev, + sizeof(*c), c, cmd_dma_handle); + return NULL; + } + memset(c->err_info, 0, sizeof(*c->err_info)); + + INIT_HLIST_NODE(&c->list); + c->busaddr = (__u32) cmd_dma_handle; + temp64.val = (__u64) err_dma_handle; + c->ErrDesc.Addr.lower = temp64.val32.lower; + c->ErrDesc.Addr.upper = temp64.val32.upper; + c->ErrDesc.Len = sizeof(*c->err_info); + + c->h = h; + return c; +} + +static void cmd_free(struct ctlr_info *h, struct CommandList *c) +{ + int i; + + i = c - h->cmd_pool; + clear_bit(i & (BITS_PER_LONG - 1), + h->cmd_pool_bits + (i / BITS_PER_LONG)); + h->nr_frees++; +} + +static void cmd_special_free(struct ctlr_info *h, struct CommandList *c) +{ + union u64bit temp64; + + temp64.val32.lower = c->ErrDesc.Addr.lower; + temp64.val32.upper = c->ErrDesc.Addr.upper; + pci_free_consistent(h->pdev, sizeof(*c->err_info), + c->err_info, (dma_addr_t) temp64.val); + pci_free_consistent(h->pdev, sizeof(*c), + c, (dma_addr_t) c->busaddr); +} + +#ifdef CONFIG_COMPAT + +static int do_ioctl(struct scsi_device *dev, int cmd, void *arg) +{ + int ret; + + lock_kernel(); + ret = hpsa_ioctl(dev, cmd, arg); + unlock_kernel(); + return ret; +} + +static int hpsa_ioctl32_passthru(struct scsi_device *dev, int cmd, void *arg); +static int hpsa_ioctl32_big_passthru(struct scsi_device *dev, + int cmd, void *arg); + +static int hpsa_compat_ioctl(struct scsi_device *dev, int cmd, void *arg) +{ + switch (cmd) { + case CCISS_GETPCIINFO: + case CCISS_GETINTINFO: + case CCISS_SETINTINFO: + case CCISS_GETNODENAME: + case CCISS_SETNODENAME: + case CCISS_GETHEARTBEAT: + case CCISS_GETBUSTYPES: + case CCISS_GETFIRMVER: + case CCISS_GETDRIVVER: + case CCISS_REVALIDVOLS: + case CCISS_DEREGDISK: + case CCISS_REGNEWDISK: + case CCISS_REGNEWD: + case CCISS_RESCANDISK: + case CCISS_GETLUNINFO: + return do_ioctl(dev, cmd, arg); + + case CCISS_PASSTHRU32: + return hpsa_ioctl32_passthru(dev, cmd, arg); + case CCISS_BIG_PASSTHRU32: + return hpsa_ioctl32_big_passthru(dev, cmd, arg); + + default: + return -ENOIOCTLCMD; + } +} + +static int hpsa_ioctl32_passthru(struct scsi_device *dev, int cmd, void *arg) +{ + IOCTL32_Command_struct __user *arg32 = + (IOCTL32_Command_struct __user *) arg; + IOCTL_Command_struct arg64; + IOCTL_Command_struct __user *p = compat_alloc_user_space(sizeof(arg64)); + int err; + u32 cp; + + err = 0; + err |= copy_from_user(&arg64.LUN_info, &arg32->LUN_info, + sizeof(arg64.LUN_info)); + err |= copy_from_user(&arg64.Request, &arg32->Request, + sizeof(arg64.Request)); + err |= copy_from_user(&arg64.error_info, &arg32->error_info, + sizeof(arg64.error_info)); + err |= get_user(arg64.buf_size, &arg32->buf_size); + err |= get_user(cp, &arg32->buf); + arg64.buf = compat_ptr(cp); + err |= copy_to_user(p, &arg64, sizeof(arg64)); + + if (err) + return -EFAULT; + + err = do_ioctl(dev, CCISS_PASSTHRU, (void *)p); + if (err) + return err; + err |= copy_in_user(&arg32->error_info, &p->error_info, + sizeof(arg32->error_info)); + if (err) + return -EFAULT; + return err; +} + +static int hpsa_ioctl32_big_passthru(struct scsi_device *dev, + int cmd, void *arg) +{ + BIG_IOCTL32_Command_struct __user *arg32 = + (BIG_IOCTL32_Command_struct __user *) arg; + BIG_IOCTL_Command_struct arg64; + BIG_IOCTL_Command_struct __user *p = + compat_alloc_user_space(sizeof(arg64)); + int err; + u32 cp; + + err = 0; + err |= copy_from_user(&arg64.LUN_info, &arg32->LUN_info, + sizeof(arg64.LUN_info)); + err |= copy_from_user(&arg64.Request, &arg32->Request, + sizeof(arg64.Request)); + err |= copy_from_user(&arg64.error_info, &arg32->error_info, + sizeof(arg64.error_info)); + err |= get_user(arg64.buf_size, &arg32->buf_size); + err |= get_user(arg64.malloc_size, &arg32->malloc_size); + err |= get_user(cp, &arg32->buf); + arg64.buf = compat_ptr(cp); + err |= copy_to_user(p, &arg64, sizeof(arg64)); + + if (err) + return -EFAULT; + + err = do_ioctl(dev, CCISS_BIG_PASSTHRU, (void *)p); + if (err) + return err; + err |= copy_in_user(&arg32->error_info, &p->error_info, + sizeof(arg32->error_info)); + if (err) + return -EFAULT; + return err; +} +#endif + +static int hpsa_getpciinfo_ioctl(struct ctlr_info *h, void __user *argp) +{ + struct hpsa_pci_info pciinfo; + + if (!argp) + return -EINVAL; + pciinfo.domain = pci_domain_nr(h->pdev->bus); + pciinfo.bus = h->pdev->bus->number; + pciinfo.dev_fn = h->pdev->devfn; + pciinfo.board_id = h->board_id; + if (copy_to_user(argp, &pciinfo, sizeof(pciinfo))) + return -EFAULT; + return 0; +} + +static int hpsa_getdrivver_ioctl(struct ctlr_info *h, void __user *argp) +{ + DriverVer_type DriverVer; + unsigned char vmaj, vmin, vsubmin; + int rc; + + rc = sscanf(HPSA_DRIVER_VERSION, "%hhu.%hhu.%hhu", + &vmaj, &vmin, &vsubmin); + if (rc != 3) { + dev_info(&h->pdev->dev, "driver version string '%s' " + "unrecognized.", HPSA_DRIVER_VERSION); + vmaj = 0; + vmin = 0; + vsubmin = 0; + } + DriverVer = (vmaj << 16) | (vmin << 8) | vsubmin; + if (!argp) + return -EINVAL; + if (copy_to_user(argp, &DriverVer, sizeof(DriverVer_type))) + return -EFAULT; + return 0; +} + +static int hpsa_passthru_ioctl(struct ctlr_info *h, void __user *argp) +{ + IOCTL_Command_struct iocommand; + struct CommandList *c; + char *buff = NULL; + union u64bit temp64; + + if (!argp) + return -EINVAL; + if (!capable(CAP_SYS_RAWIO)) + return -EPERM; + if (copy_from_user(&iocommand, argp, sizeof(iocommand))) + return -EFAULT; + if ((iocommand.buf_size < 1) && + (iocommand.Request.Type.Direction != XFER_NONE)) { + return -EINVAL; + } + if (iocommand.buf_size > 0) { + buff = kmalloc(iocommand.buf_size, GFP_KERNEL); + if (buff == NULL) + return -EFAULT; + } + if (iocommand.Request.Type.Direction == XFER_WRITE) { + /* Copy the data into the buffer we created */ + if (copy_from_user(buff, iocommand.buf, iocommand.buf_size)) { + kfree(buff); + return -EFAULT; + } + } else + memset(buff, 0, iocommand.buf_size); + c = cmd_special_alloc(h); + if (c == NULL) { + kfree(buff); + return -ENOMEM; + } + /* Fill in the command type */ + c->cmd_type = CMD_IOCTL_PEND; + /* Fill in Command Header */ + c->Header.ReplyQueue = 0; /* unused in simple mode */ + if (iocommand.buf_size > 0) { /* buffer to fill */ + c->Header.SGList = 1; + c->Header.SGTotal = 1; + } else { /* no buffers to fill */ + c->Header.SGList = 0; + c->Header.SGTotal = 0; + } + memcpy(&c->Header.LUN, &iocommand.LUN_info, sizeof(c->Header.LUN)); + /* use the kernel address the cmd block for tag */ + c->Header.Tag.lower = c->busaddr; + + /* Fill in Request block */ + memcpy(&c->Request, &iocommand.Request, + sizeof(c->Request)); + + /* Fill in the scatter gather information */ + if (iocommand.buf_size > 0) { + temp64.val = pci_map_single(h->pdev, buff, + iocommand.buf_size, PCI_DMA_BIDIRECTIONAL); + c->SG[0].Addr.lower = temp64.val32.lower; + c->SG[0].Addr.upper = temp64.val32.upper; + c->SG[0].Len = iocommand.buf_size; + c->SG[0].Ext = 0; /* we are not chaining*/ + } + hpsa_scsi_do_simple_cmd_core(h, c); + hpsa_pci_unmap(h->pdev, c, 1, PCI_DMA_BIDIRECTIONAL); + check_ioctl_unit_attention(h, c); + + /* Copy the error information out */ + memcpy(&iocommand.error_info, c->err_info, + sizeof(iocommand.error_info)); + if (copy_to_user(argp, &iocommand, sizeof(iocommand))) { + kfree(buff); + cmd_special_free(h, c); + return -EFAULT; + } + + if (iocommand.Request.Type.Direction == XFER_READ) { + /* Copy the data out of the buffer we created */ + if (copy_to_user(iocommand.buf, buff, iocommand.buf_size)) { + kfree(buff); + cmd_special_free(h, c); + return -EFAULT; + } + } + kfree(buff); + cmd_special_free(h, c); + return 0; +} + +static int hpsa_big_passthru_ioctl(struct ctlr_info *h, void __user *argp) +{ + BIG_IOCTL_Command_struct *ioc; + struct CommandList *c; + unsigned char **buff = NULL; + int *buff_size = NULL; + union u64bit temp64; + BYTE sg_used = 0; + int status = 0; + int i; + __u32 left; + __u32 sz; + BYTE __user *data_ptr; + + if (!argp) + return -EINVAL; + if (!capable(CAP_SYS_RAWIO)) + return -EPERM; + ioc = (BIG_IOCTL_Command_struct *) + kmalloc(sizeof(*ioc), GFP_KERNEL); + if (!ioc) { + status = -ENOMEM; + goto cleanup1; + } + if (copy_from_user(ioc, argp, sizeof(*ioc))) { + status = -EFAULT; + goto cleanup1; + } + if ((ioc->buf_size < 1) && + (ioc->Request.Type.Direction != XFER_NONE)) { + status = -EINVAL; + goto cleanup1; + } + /* Check kmalloc limits using all SGs */ + if (ioc->malloc_size > MAX_KMALLOC_SIZE) { + status = -EINVAL; + goto cleanup1; + } + if (ioc->buf_size > ioc->malloc_size * MAXSGENTRIES) { + status = -EINVAL; + goto cleanup1; + } + buff = kzalloc(MAXSGENTRIES * sizeof(char *), GFP_KERNEL); + if (!buff) { + status = -ENOMEM; + goto cleanup1; + } + buff_size = kmalloc(MAXSGENTRIES * sizeof(int), GFP_KERNEL); + if (!buff_size) { + status = -ENOMEM; + goto cleanup1; + } + left = ioc->buf_size; + data_ptr = ioc->buf; + while (left) { + sz = (left > ioc->malloc_size) ? ioc->malloc_size : left; + buff_size[sg_used] = sz; + buff[sg_used] = kmalloc(sz, GFP_KERNEL); + if (buff[sg_used] == NULL) { + status = -ENOMEM; + goto cleanup1; + } + if (ioc->Request.Type.Direction == XFER_WRITE) { + if (copy_from_user(buff[sg_used], data_ptr, sz)) { + status = -ENOMEM; + goto cleanup1; + } + } else + memset(buff[sg_used], 0, sz); + left -= sz; + data_ptr += sz; + sg_used++; + } + c = cmd_special_alloc(h); + if (c == NULL) { + status = -ENOMEM; + goto cleanup1; + } + c->cmd_type = CMD_IOCTL_PEND; + c->Header.ReplyQueue = 0; + + if (ioc->buf_size > 0) { + c->Header.SGList = sg_used; + c->Header.SGTotal = sg_used; + } else { + c->Header.SGList = 0; + c->Header.SGTotal = 0; + } + memcpy(&c->Header.LUN, &ioc->LUN_info, sizeof(c->Header.LUN)); + c->Header.Tag.lower = c->busaddr; + memcpy(&c->Request, &ioc->Request, sizeof(c->Request)); + if (ioc->buf_size > 0) { + int i; + for (i = 0; i < sg_used; i++) { + temp64.val = pci_map_single(h->pdev, buff[i], + buff_size[i], PCI_DMA_BIDIRECTIONAL); + c->SG[i].Addr.lower = temp64.val32.lower; + c->SG[i].Addr.upper = temp64.val32.upper; + c->SG[i].Len = buff_size[i]; + /* we are not chaining */ + c->SG[i].Ext = 0; + } + } + hpsa_scsi_do_simple_cmd_core(h, c); + hpsa_pci_unmap(h->pdev, c, sg_used, PCI_DMA_BIDIRECTIONAL); + check_ioctl_unit_attention(h, c); + /* Copy the error information out */ + memcpy(&ioc->error_info, c->err_info, sizeof(ioc->error_info)); + if (copy_to_user(argp, ioc, sizeof(*ioc))) { + cmd_special_free(h, c); + status = -EFAULT; + goto cleanup1; + } + if (ioc->Request.Type.Direction == XFER_READ) { + /* Copy the data out of the buffer we created */ + BYTE __user *ptr = ioc->buf; + for (i = 0; i < sg_used; i++) { + if (copy_to_user(ptr, buff[i], buff_size[i])) { + cmd_special_free(h, c); + status = -EFAULT; + goto cleanup1; + } + ptr += buff_size[i]; + } + } + cmd_special_free(h, c); + status = 0; +cleanup1: + if (buff) { + for (i = 0; i < sg_used; i++) + kfree(buff[i]); + kfree(buff); + } + kfree(buff_size); + kfree(ioc); + return status; +} + +static void check_ioctl_unit_attention(struct ctlr_info *h, + struct CommandList *c) +{ + if (c->err_info->CommandStatus == CMD_TARGET_STATUS && + c->err_info->ScsiStatus != SAM_STAT_CHECK_CONDITION) + (void) check_for_unit_attention(h, c); +} +/* + * ioctl + */ +static int hpsa_ioctl(struct scsi_device *dev, int cmd, void *arg) +{ + struct ctlr_info *h; + void __user *argp = (void __user *)arg; + + h = sdev_to_hba(dev); + + switch (cmd) { + case CCISS_DEREGDISK: + case CCISS_REGNEWDISK: + case CCISS_REGNEWD: + hpsa_update_scsi_devices(h, dev->host->host_no); + return 0; + case CCISS_GETPCIINFO: + return hpsa_getpciinfo_ioctl(h, argp); + case CCISS_GETDRIVVER: + return hpsa_getdrivver_ioctl(h, argp); + case CCISS_PASSTHRU: + return hpsa_passthru_ioctl(h, argp); + case CCISS_BIG_PASSTHRU: + return hpsa_big_passthru_ioctl(h, argp); + default: + return -ENOTTY; + } +} + +static void fill_cmd(struct CommandList *c, __u8 cmd, struct ctlr_info *h, + void *buff, size_t size, __u8 page_code, unsigned char *scsi3addr, + int cmd_type) +{ + int pci_dir = XFER_NONE; + + c->cmd_type = CMD_IOCTL_PEND; + c->Header.ReplyQueue = 0; + if (buff != NULL && size > 0) { + c->Header.SGList = 1; + c->Header.SGTotal = 1; + } else { + c->Header.SGList = 0; + c->Header.SGTotal = 0; + } + c->Header.Tag.lower = c->busaddr; + memcpy(c->Header.LUN.LunAddrBytes, scsi3addr, 8); + + c->Request.Type.Type = cmd_type; + if (cmd_type == TYPE_CMD) { + switch (cmd) { + case HPSA_INQUIRY: + /* are we trying to read a vital product page */ + if (page_code != 0) { + c->Request.CDB[1] = 0x01; + c->Request.CDB[2] = page_code; + } + c->Request.CDBLen = 6; + c->Request.Type.Attribute = ATTR_SIMPLE; + c->Request.Type.Direction = XFER_READ; + c->Request.Timeout = 0; + c->Request.CDB[0] = HPSA_INQUIRY; + c->Request.CDB[4] = size & 0xFF; + break; + case HPSA_REPORT_LOG: + case HPSA_REPORT_PHYS: + /* Talking to controller so It's a physical command + mode = 00 target = 0. Nothing to write. + */ + c->Request.CDBLen = 12; + c->Request.Type.Attribute = ATTR_SIMPLE; + c->Request.Type.Direction = XFER_READ; + c->Request.Timeout = 0; + c->Request.CDB[0] = cmd; + c->Request.CDB[6] = (size >> 24) & 0xFF; /* MSB */ + c->Request.CDB[7] = (size >> 16) & 0xFF; + c->Request.CDB[8] = (size >> 8) & 0xFF; + c->Request.CDB[9] = size & 0xFF; + break; + + case HPSA_READ_CAPACITY: + c->Request.CDBLen = 10; + c->Request.Type.Attribute = ATTR_SIMPLE; + c->Request.Type.Direction = XFER_READ; + c->Request.Timeout = 0; + c->Request.CDB[0] = cmd; + break; + case HPSA_CACHE_FLUSH: + c->Request.CDBLen = 12; + c->Request.Type.Attribute = ATTR_SIMPLE; + c->Request.Type.Direction = XFER_WRITE; + c->Request.Timeout = 0; + c->Request.CDB[0] = BMIC_WRITE; + c->Request.CDB[6] = BMIC_CACHE_FLUSH; + break; + case TEST_UNIT_READY: + c->Request.CDBLen = 6; + c->Request.Type.Attribute = ATTR_SIMPLE; + c->Request.Type.Direction = XFER_NONE; + c->Request.Timeout = 0; + break; + default: + dev_warn(&h->pdev->dev, "unknown command 0x%c\n", cmd); + BUG(); + return; + } + } else if (cmd_type == TYPE_MSG) { + switch (cmd) { + + case HPSA_DEVICE_RESET_MSG: + c->Request.CDBLen = 16; + c->Request.Type.Type = 1; /* It is a MSG not a CMD */ + c->Request.Type.Attribute = ATTR_SIMPLE; + c->Request.Type.Direction = XFER_NONE; + c->Request.Timeout = 0; /* Don't time out */ + c->Request.CDB[0] = 0x01; /* RESET_MSG is 0x01 */ + c->Request.CDB[1] = 0x03; /* Reset target above */ + /* If bytes 4-7 are zero, it means reset the */ + /* LunID device */ + c->Request.CDB[4] = 0x00; + c->Request.CDB[5] = 0x00; + c->Request.CDB[6] = 0x00; + c->Request.CDB[7] = 0x00; + break; + + default: + dev_warn(&h->pdev->dev, "unknown message type %d\n", + cmd); + BUG(); + } + } else { + dev_warn(&h->pdev->dev, "unknown command type %d\n", cmd_type); + BUG(); + } + + switch (c->Request.Type.Direction) { + case XFER_READ: + pci_dir = PCI_DMA_FROMDEVICE; + break; + case XFER_WRITE: + pci_dir = PCI_DMA_TODEVICE; + break; + case XFER_NONE: + pci_dir = PCI_DMA_NONE; + break; + default: + pci_dir = PCI_DMA_BIDIRECTIONAL; + } + + hpsa_map_one(h->pdev, c, buff, size, pci_dir); + + return; +} + +/* + * Map (physical) PCI mem into (virtual) kernel space + */ +static void __iomem *remap_pci_mem(ulong base, ulong size) +{ + ulong page_base = ((ulong) base) & PAGE_MASK; + ulong page_offs = ((ulong) base) - page_base; + void __iomem *page_remapped = ioremap(page_base, page_offs + size); + + return page_remapped ? (page_remapped + page_offs) : NULL; +} + +/* Takes cmds off the submission queue and sends them to the hardware, + * then puts them on the queue of cmds waiting for completion. + */ +static void start_io(struct ctlr_info *h) +{ + struct CommandList *c; + + while (!hlist_empty(&h->reqQ)) { + c = hlist_entry(h->reqQ.first, struct CommandList, list); + /* can't do anything if fifo is full */ + if ((h->access.fifo_full(h))) { + dev_warn(&h->pdev->dev, "fifo full\n"); + break; + } + + /* Get the first entry from the Request Q */ + removeQ(c); + h->Qdepth--; + + /* Tell the controller execute command */ + h->access.submit_command(h, c); + + /* Put job onto the completed Q */ + addQ(&h->cmpQ, c); + } +} + +static inline unsigned long get_next_completion(struct ctlr_info *h) +{ + return h->access.command_completed(h); +} + +static inline int interrupt_pending(struct ctlr_info *h) +{ + return h->access.intr_pending(h); +} + +static inline long interrupt_not_for_us(struct ctlr_info *h) +{ + return ((h->access.intr_pending(h) == 0) || + (h->interrupts_enabled == 0)); +} + +static inline int bad_tag(struct ctlr_info *h, __u32 tag_index, + __u32 raw_tag) +{ + if (unlikely(tag_index >= h->nr_cmds)) { + dev_warn(&h->pdev->dev, "bad tag 0x%08x ignored.\n", raw_tag); + return 1; + } + return 0; +} + +static inline void finish_cmd(struct CommandList *c, __u32 raw_tag) +{ + removeQ(c); + if (likely(c->cmd_type == CMD_SCSI)) + complete_scsi_command(c, 0, raw_tag); + else if (c->cmd_type == CMD_IOCTL_PEND) + complete(c->waiting); +} + +static irqreturn_t do_hpsa_intr(int irq, void *dev_id) +{ + struct ctlr_info *h = dev_id; + struct CommandList *c; + unsigned long flags; + __u32 raw_tag, tag, tag_index; + struct hlist_node *tmp; + + if (interrupt_not_for_us(h)) + return IRQ_NONE; + spin_lock_irqsave(&h->lock, flags); + while (interrupt_pending(h)) { + while ((raw_tag = get_next_completion(h)) != FIFO_EMPTY) { + if (likely(HPSA_TAG_CONTAINS_INDEX(raw_tag))) { + tag_index = HPSA_TAG_TO_INDEX(raw_tag); + if (bad_tag(h, tag_index, raw_tag)) + return IRQ_HANDLED; + c = h->cmd_pool + tag_index; + finish_cmd(c, raw_tag); + continue; + } + tag = HPSA_TAG_DISCARD_ERROR_BITS(raw_tag); + c = NULL; + hlist_for_each_entry(c, tmp, &h->cmpQ, list) { + if (c->busaddr == tag) { + finish_cmd(c, raw_tag); + break; + } + } + } + } + spin_unlock_irqrestore(&h->lock, flags); + return IRQ_HANDLED; +} + +/* Send a message CDB to the firmware. */ +static __devinit int hpsa_message(struct pci_dev *pdev, unsigned char opcode, + unsigned char type) +{ + struct Command { + struct CommandListHeader CommandHeader; + struct RequestBlock Request; + struct ErrDescriptor ErrorDescriptor; + }; + struct Command *cmd; + static const size_t cmd_sz = sizeof(*cmd) + + sizeof(cmd->ErrorDescriptor); + dma_addr_t paddr64; + uint32_t paddr32, tag; + void __iomem *vaddr; + int i, err; + + vaddr = pci_ioremap_bar(pdev, 0); + if (vaddr == NULL) + return -ENOMEM; + + /* The Inbound Post Queue only accepts 32-bit physical addresses for the + * CCISS commands, so they must be allocated from the lower 4GiB of + * memory. + */ + err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)); + if (err) { + iounmap(vaddr); + return -ENOMEM; + } + + cmd = pci_alloc_consistent(pdev, cmd_sz, &paddr64); + if (cmd == NULL) { + iounmap(vaddr); + return -ENOMEM; + } + + /* This must fit, because of the 32-bit consistent DMA mask. Also, + * although there's no guarantee, we assume that the address is at + * least 4-byte aligned (most likely, it's page-aligned). + */ + paddr32 = paddr64; + + cmd->CommandHeader.ReplyQueue = 0; + cmd->CommandHeader.SGList = 0; + cmd->CommandHeader.SGTotal = 0; + cmd->CommandHeader.Tag.lower = paddr32; + cmd->CommandHeader.Tag.upper = 0; + memset(&cmd->CommandHeader.LUN.LunAddrBytes, 0, 8); + + cmd->Request.CDBLen = 16; + cmd->Request.Type.Type = TYPE_MSG; + cmd->Request.Type.Attribute = ATTR_HEADOFQUEUE; + cmd->Request.Type.Direction = XFER_NONE; + cmd->Request.Timeout = 0; /* Don't time out */ + cmd->Request.CDB[0] = opcode; + cmd->Request.CDB[1] = type; + memset(&cmd->Request.CDB[2], 0, 14); /* rest of the CDB is reserved */ + cmd->ErrorDescriptor.Addr.lower = paddr32 + sizeof(*cmd); + cmd->ErrorDescriptor.Addr.upper = 0; + cmd->ErrorDescriptor.Len = sizeof(struct ErrorInfo); + + writel(paddr32, vaddr + SA5_REQUEST_PORT_OFFSET); + + for (i = 0; i < HPSA_MSG_SEND_RETRY_LIMIT; i++) { + tag = readl(vaddr + SA5_REPLY_PORT_OFFSET); + if (HPSA_TAG_DISCARD_ERROR_BITS(tag) == paddr32) + break; + msleep(HPSA_MSG_SEND_RETRY_INTERVAL_MSECS); + } + + iounmap(vaddr); + + /* we leak the DMA buffer here ... no choice since the controller could + * still complete the command. + */ + if (i == HPSA_MSG_SEND_RETRY_LIMIT) { + dev_err(&pdev->dev, "controller message %02x:%02x timed out\n", + opcode, type); + return -ETIMEDOUT; + } + + pci_free_consistent(pdev, cmd_sz, cmd, paddr64); + + if (tag & HPSA_ERROR_BIT) { + dev_err(&pdev->dev, "controller message %02x:%02x failed\n", + opcode, type); + return -EIO; + } + + dev_info(&pdev->dev, "controller message %02x:%02x succeeded\n", + opcode, type); + return 0; +} + +#define hpsa_soft_reset_controller(p) hpsa_message(p, 1, 0) +#define hpsa_noop(p) hpsa_message(p, 3, 0) + +static __devinit int hpsa_reset_msi(struct pci_dev *pdev) +{ +/* the #defines are stolen from drivers/pci/msi.h. */ +#define msi_control_reg(base) (base + PCI_MSI_FLAGS) +#define PCI_MSIX_FLAGS_ENABLE (1 << 15) + + int pos; + u16 control = 0; + + pos = pci_find_capability(pdev, PCI_CAP_ID_MSI); + if (pos) { + pci_read_config_word(pdev, msi_control_reg(pos), &control); + if (control & PCI_MSI_FLAGS_ENABLE) { + dev_info(&pdev->dev, "resetting MSI\n"); + pci_write_config_word(pdev, msi_control_reg(pos), + control & ~PCI_MSI_FLAGS_ENABLE); + } + } + + pos = pci_find_capability(pdev, PCI_CAP_ID_MSIX); + if (pos) { + pci_read_config_word(pdev, msi_control_reg(pos), &control); + if (control & PCI_MSIX_FLAGS_ENABLE) { + dev_info(&pdev->dev, "resetting MSI-X\n"); + pci_write_config_word(pdev, msi_control_reg(pos), + control & ~PCI_MSIX_FLAGS_ENABLE); + } + } + + return 0; +} + +/* This does a hard reset of the controller using PCI power management + * states. + */ +static __devinit int hpsa_hard_reset_controller(struct pci_dev *pdev) +{ + u16 pmcsr, saved_config_space[32]; + int i, pos; + + dev_info(&pdev->dev, "using PCI PM to reset controller\n"); + + /* This is very nearly the same thing as + * + * pci_save_state(pci_dev); + * pci_set_power_state(pci_dev, PCI_D3hot); + * pci_set_power_state(pci_dev, PCI_D0); + * pci_restore_state(pci_dev); + * + * but we can't use these nice canned kernel routines on + * kexec, because they also check the MSI/MSI-X state in PCI + * configuration space and do the wrong thing when it is + * set/cleared. Also, the pci_save/restore_state functions + * violate the ordering requirements for restoring the + * configuration space from the CCISS document (see the + * comment below). So we roll our own .... + */ + + for (i = 0; i < 32; i++) + pci_read_config_word(pdev, 2*i, &saved_config_space[i]); + + pos = pci_find_capability(pdev, PCI_CAP_ID_PM); + if (pos == 0) { + dev_err(&pdev->dev, + "hpsa_reset_controller: PCI PM not supported\n"); + return -ENODEV; + } + + /* Quoting from the Open CISS Specification: "The Power + * Management Control/Status Register (CSR) controls the power + * state of the device. The normal operating state is D0, + * CSR=00h. The software off state is D3, CSR=03h. To reset + * the controller, place the interface device in D3 then to + * D0, this causes a secondary PCI reset which will reset the + * controller." + */ + + /* enter the D3hot power management state */ + pci_read_config_word(pdev, pos + PCI_PM_CTRL, &pmcsr); + pmcsr &= ~PCI_PM_CTRL_STATE_MASK; + pmcsr |= PCI_D3hot; + pci_write_config_word(pdev, pos + PCI_PM_CTRL, pmcsr); + + msleep(500); + + /* enter the D0 power management state */ + pmcsr &= ~PCI_PM_CTRL_STATE_MASK; + pmcsr |= PCI_D0; + pci_write_config_word(pdev, pos + PCI_PM_CTRL, pmcsr); + + msleep(500); + + /* Restore the PCI configuration space. The Open CISS + * Specification says, "Restore the PCI Configuration + * Registers, offsets 00h through 60h. It is important to + * restore the command register, 16-bits at offset 04h, + * last. Do not restore the configuration status register, + * 16-bits at offset 06h." Note that the offset is 2*i. + */ + for (i = 0; i < 32; i++) { + if (i == 2 || i == 3) + continue; + pci_write_config_word(pdev, 2*i, saved_config_space[i]); + } + wmb(); + pci_write_config_word(pdev, 4, saved_config_space[2]); + + return 0; +} + +/* + * We cannot read the structure directly, for portability we must use + * the io functions. + * This is for debug only. + */ +#ifdef HPSA_DEBUG +static void print_cfg_table(struct device *dev, struct CfgTable *tb) +{ + int i; + char temp_name[17]; + + dev_info(dev, "Controller Configuration information\n"); + dev_info(dev, "------------------------------------\n"); + for (i = 0; i < 4; i++) + temp_name[i] = readb(&(tb->Signature[i])); + temp_name[4] = '\0'; + dev_info(dev, " Signature = %s\n", temp_name); + dev_info(dev, " Spec Number = %d\n", readl(&(tb->SpecValence))); + dev_info(dev, " Transport methods supported = 0x%x\n", + readl(&(tb->TransportSupport))); + dev_info(dev, " Transport methods active = 0x%x\n", + readl(&(tb->TransportActive))); + dev_info(dev, " Requested transport Method = 0x%x\n", + readl(&(tb->HostWrite.TransportRequest))); + dev_info(dev, " Coalesce Interrupt Delay = 0x%x\n", + readl(&(tb->HostWrite.CoalIntDelay))); + dev_info(dev, " Coalesce Interrupt Count = 0x%x\n", + readl(&(tb->HostWrite.CoalIntCount))); + dev_info(dev, " Max outstanding commands = 0x%d\n", + readl(&(tb->CmdsOutMax))); + dev_info(dev, " Bus Types = 0x%x\n", readl(&(tb->BusTypes))); + for (i = 0; i < 16; i++) + temp_name[i] = readb(&(tb->ServerName[i])); + temp_name[16] = '\0'; + dev_info(dev, " Server Name = %s\n", temp_name); + dev_info(dev, " Heartbeat Counter = 0x%x\n\n\n", + readl(&(tb->HeartBeat))); +} +#endif /* HPSA_DEBUG */ + +static int find_PCI_BAR_index(struct pci_dev *pdev, unsigned long pci_bar_addr) +{ + int i, offset, mem_type, bar_type; + + if (pci_bar_addr == PCI_BASE_ADDRESS_0) /* looking for BAR zero? */ + return 0; + offset = 0; + for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) { + bar_type = pci_resource_flags(pdev, i) & PCI_BASE_ADDRESS_SPACE; + if (bar_type == PCI_BASE_ADDRESS_SPACE_IO) + offset += 4; + else { + mem_type = pci_resource_flags(pdev, i) & + PCI_BASE_ADDRESS_MEM_TYPE_MASK; + switch (mem_type) { + case PCI_BASE_ADDRESS_MEM_TYPE_32: + case PCI_BASE_ADDRESS_MEM_TYPE_1M: + offset += 4; /* 32 bit */ + break; + case PCI_BASE_ADDRESS_MEM_TYPE_64: + offset += 8; + break; + default: /* reserved in PCI 2.2 */ + dev_warn(&pdev->dev, + "base address is invalid\n"); + return -1; + break; + } + } + if (offset == pci_bar_addr - PCI_BASE_ADDRESS_0) + return i + 1; + } + return -1; +} + +/* If MSI/MSI-X is supported by the kernel we will try to enable it on + * controllers that are capable. If not, we use IO-APIC mode. + */ + +static void __devinit hpsa_interrupt_mode(struct ctlr_info *h, + struct pci_dev *pdev, __u32 board_id) +{ +#ifdef CONFIG_PCI_MSI + int err; + struct msix_entry hpsa_msix_entries[4] = { {0, 0}, {0, 1}, + {0, 2}, {0, 3} + }; + + /* Some boards advertise MSI but don't really support it */ + if ((board_id == 0x40700E11) || + (board_id == 0x40800E11) || + (board_id == 0x40820E11) || (board_id == 0x40830E11)) + goto default_int_mode; + if (pci_find_capability(pdev, PCI_CAP_ID_MSIX)) { + dev_info(&pdev->dev, "MSIX\n"); + err = pci_enable_msix(pdev, hpsa_msix_entries, 4); + if (!err) { + h->intr[0] = hpsa_msix_entries[0].vector; + h->intr[1] = hpsa_msix_entries[1].vector; + h->intr[2] = hpsa_msix_entries[2].vector; + h->intr[3] = hpsa_msix_entries[3].vector; + h->msix_vector = 1; + return; + } + if (err > 0) { + dev_warn(&pdev->dev, "only %d MSI-X vectors " + "available\n", err); + goto default_int_mode; + } else { + dev_warn(&pdev->dev, "MSI-X init failed %d\n", + err); + goto default_int_mode; + } + } + if (pci_find_capability(pdev, PCI_CAP_ID_MSI)) { + dev_info(&pdev->dev, "MSI\n"); + if (!pci_enable_msi(pdev)) + h->msi_vector = 1; + else + dev_warn(&pdev->dev, "MSI init failed\n"); + } +default_int_mode: +#endif /* CONFIG_PCI_MSI */ + /* if we get here we're going to use the default interrupt mode */ + h->intr[SIMPLE_MODE_INT] = pdev->irq; + return; +} + +static int hpsa_pci_init(struct ctlr_info *h, struct pci_dev *pdev) +{ + ushort subsystem_vendor_id, subsystem_device_id, command; + __u32 board_id, scratchpad = 0; + __u64 cfg_offset; + __u32 cfg_base_addr; + __u64 cfg_base_addr_index; + int i, prod_index, err; + + subsystem_vendor_id = pdev->subsystem_vendor; + subsystem_device_id = pdev->subsystem_device; + board_id = (((__u32) (subsystem_device_id << 16) & 0xffff0000) | + subsystem_vendor_id); + + for (i = 0; i < ARRAY_SIZE(products); i++) + if (board_id == products[i].board_id) + break; + + prod_index = i; + + if (prod_index == ARRAY_SIZE(products)) { + prod_index--; + if (subsystem_vendor_id != PCI_VENDOR_ID_HP || + !hpsa_allow_any) { + dev_warn(&pdev->dev, "unrecognized board ID:" + " 0x%08lx, ignoring.\n", + (unsigned long) board_id); + return -ENODEV; + } + } + /* check to see if controller has been disabled + * BEFORE trying to enable it + */ + (void)pci_read_config_word(pdev, PCI_COMMAND, &command); + if (!(command & 0x02)) { + dev_warn(&pdev->dev, "controller appears to be disabled\n"); + return -ENODEV; + } + + err = pci_enable_device(pdev); + if (err) { + dev_warn(&pdev->dev, "unable to enable PCI device\n"); + return err; + } + + err = pci_request_regions(pdev, "hpsa"); + if (err) { + dev_err(&pdev->dev, "cannot obtain PCI resources, aborting\n"); + return err; + } + + /* If the kernel supports MSI/MSI-X we will try to enable that, + * else we use the IO-APIC interrupt assigned to us by system ROM. + */ + hpsa_interrupt_mode(h, pdev, board_id); + + /* find the memory BAR */ + for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) { + if (pci_resource_flags(pdev, i) & IORESOURCE_MEM) + break; + } + if (i == DEVICE_COUNT_RESOURCE) { + dev_warn(&pdev->dev, "no memory BAR found\n"); + err = -ENODEV; + goto err_out_free_res; + } + + h->paddr = pci_resource_start(pdev, i); /* addressing mode bits + * already removed + */ + + h->vaddr = remap_pci_mem(h->paddr, 0x250); + + /* Wait for the board to become ready. */ + for (i = 0; i < HPSA_BOARD_READY_ITERATIONS; i++) { + scratchpad = readl(h->vaddr + SA5_SCRATCHPAD_OFFSET); + if (scratchpad == HPSA_FIRMWARE_READY) + break; + msleep(HPSA_BOARD_READY_POLL_INTERVAL_MSECS); + } + if (scratchpad != HPSA_FIRMWARE_READY) { + dev_warn(&pdev->dev, "board not ready, timed out.\n"); + err = -ENODEV; + goto err_out_free_res; + } + + /* get the address index number */ + cfg_base_addr = readl(h->vaddr + SA5_CTCFG_OFFSET); + cfg_base_addr &= (__u32) 0x0000ffff; + cfg_base_addr_index = find_PCI_BAR_index(pdev, cfg_base_addr); + if (cfg_base_addr_index == -1) { + dev_warn(&pdev->dev, "cannot find cfg_base_addr_index\n"); + err = -ENODEV; + goto err_out_free_res; + } + + cfg_offset = readl(h->vaddr + SA5_CTMEM_OFFSET); + h->cfgtable = remap_pci_mem(pci_resource_start(pdev, + cfg_base_addr_index) + cfg_offset, + sizeof(h->cfgtable)); + h->board_id = board_id; + + /* Query controller for max supported commands: */ + h->max_commands = readl(&(h->cfgtable->CmdsOutMax)); + + h->product_name = products[prod_index].product_name; + h->access = *(products[prod_index].access); + /* Allow room for some ioctls */ + h->nr_cmds = h->max_commands - 4; + + if ((readb(&h->cfgtable->Signature[0]) != 'C') || + (readb(&h->cfgtable->Signature[1]) != 'I') || + (readb(&h->cfgtable->Signature[2]) != 'S') || + (readb(&h->cfgtable->Signature[3]) != 'S')) { + dev_warn(&pdev->dev, "not a valid CISS config table\n"); + err = -ENODEV; + goto err_out_free_res; + } +#ifdef CONFIG_X86 + { + /* Need to enable prefetch in the SCSI core for 6400 in x86 */ + __u32 prefetch; + prefetch = readl(&(h->cfgtable->SCSI_Prefetch)); + prefetch |= 0x100; + writel(prefetch, &(h->cfgtable->SCSI_Prefetch)); + } +#endif + + /* Disabling DMA prefetch for the P600 + * An ASIC bug may result in a prefetch beyond + * physical memory. + */ + if (board_id == 0x3225103C) { + __u32 dma_prefetch; + dma_prefetch = readl(h->vaddr + I2O_DMA1_CFG); + dma_prefetch |= 0x8000; + writel(dma_prefetch, h->vaddr + I2O_DMA1_CFG); + } + + h->max_commands = readl(&(h->cfgtable->CmdsOutMax)); + /* Update the field, and then ring the doorbell */ + writel(CFGTBL_Trans_Simple, &(h->cfgtable->HostWrite.TransportRequest)); + writel(CFGTBL_ChangeReq, h->vaddr + SA5_DOORBELL); + + /* under certain very rare conditions, this can take awhile. + * (e.g.: hot replace a failed 144GB drive in a RAID 5 set right + * as we enter this code.) + */ + for (i = 0; i < MAX_CONFIG_WAIT; i++) { + if (!(readl(h->vaddr + SA5_DOORBELL) & CFGTBL_ChangeReq)) + break; + /* delay and try again */ + msleep(10); + } + +#ifdef HPSA_DEBUG + print_cfg_table(&pdev->dev, h->cfgtable); +#endif /* HPSA_DEBUG */ + + if (!(readl(&(h->cfgtable->TransportActive)) & CFGTBL_Trans_Simple)) { + dev_warn(&pdev->dev, "unable to get board into simple mode\n"); + err = -ENODEV; + goto err_out_free_res; + } + return 0; + +err_out_free_res: + /* + * Deliberately omit pci_disable_device(): it does something nasty to + * Smart Array controllers that pci_enable_device does not undo + */ + pci_release_regions(pdev); + return err; +} + +static int __devinit hpsa_init_one(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + int i; + int dac; + struct ctlr_info *h; + + if (number_of_controllers == 0) + printk(KERN_INFO DRIVER_NAME "\n"); + if (reset_devices) { + /* Reset the controller with a PCI power-cycle */ + if (hpsa_hard_reset_controller(pdev) || hpsa_reset_msi(pdev)) + return -ENODEV; + + /* Some devices (notably the HP Smart Array 5i Controller) + need a little pause here */ + msleep(HPSA_POST_RESET_PAUSE_MSECS); + + /* Now try to get the controller to respond to a no-op */ + for (i = 0; i < HPSA_POST_RESET_NOOP_RETRIES; i++) { + if (hpsa_noop(pdev) == 0) + break; + else + dev_warn(&pdev->dev, "no-op failed%s\n", + (i < 11 ? "; re-trying" : "")); + } + } + + BUILD_BUG_ON(sizeof(struct CommandList) % 8); + h = kzalloc(sizeof(*h), GFP_KERNEL); + if (!h) + return -1; + + h->busy_initializing = 1; + INIT_HLIST_HEAD(&h->cmpQ); + INIT_HLIST_HEAD(&h->reqQ); + mutex_init(&h->busy_shutting_down); + init_completion(&h->scan_wait); + if (hpsa_pci_init(h, pdev) != 0) + goto clean1; + + sprintf(h->devname, "hpsa%d", number_of_controllers); + h->ctlr = number_of_controllers; + number_of_controllers++; + h->pdev = pdev; + + /* configure PCI DMA stuff */ + if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) + dac = 1; + else if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) + dac = 0; + else { + dev_err(&pdev->dev, "no suitable DMA available\n"); + goto clean1; + } + + /* make sure the board interrupts are off */ + h->access.set_intr_mask(h, HPSA_INTR_OFF); + if (request_irq(h->intr[SIMPLE_MODE_INT], do_hpsa_intr, + IRQF_DISABLED | IRQF_SHARED, h->devname, h)) { + dev_err(&pdev->dev, "unable to get irq %d for %s\n", + h->intr[SIMPLE_MODE_INT], h->devname); + goto clean2; + } + + dev_info(&pdev->dev, "%s: <0x%x> at PCI %s IRQ %d%s using DAC\n", + h->devname, pdev->device, pci_name(pdev), + h->intr[SIMPLE_MODE_INT], dac ? "" : " not"); + + h->cmd_pool_bits = + kmalloc(((h->nr_cmds + BITS_PER_LONG - + 1) / BITS_PER_LONG) * sizeof(unsigned long), GFP_KERNEL); + h->cmd_pool = pci_alloc_consistent(h->pdev, + h->nr_cmds * sizeof(*h->cmd_pool), + &(h->cmd_pool_dhandle)); + h->errinfo_pool = pci_alloc_consistent(h->pdev, + h->nr_cmds * sizeof(*h->errinfo_pool), + &(h->errinfo_pool_dhandle)); + if ((h->cmd_pool_bits == NULL) + || (h->cmd_pool == NULL) + || (h->errinfo_pool == NULL)) { + dev_err(&pdev->dev, "out of memory"); + goto clean4; + } + spin_lock_init(&h->lock); + + pci_set_drvdata(pdev, h); + memset(h->cmd_pool_bits, 0, + ((h->nr_cmds + BITS_PER_LONG - + 1) / BITS_PER_LONG) * sizeof(unsigned long)); + + hpsa_scsi_setup(h); + + /* Turn the interrupts on so we can service requests */ + h->access.set_intr_mask(h, HPSA_INTR_ON); + + hpsa_register_scsi(h); /* hook ourselves into SCSI subsystem */ + h->busy_initializing = 0; + return 1; + +clean4: + kfree(h->cmd_pool_bits); + if (h->cmd_pool) + pci_free_consistent(h->pdev, + h->nr_cmds * sizeof(struct CommandList), + h->cmd_pool, h->cmd_pool_dhandle); + if (h->errinfo_pool) + pci_free_consistent(h->pdev, + h->nr_cmds * sizeof(struct ErrorInfo), + h->errinfo_pool, + h->errinfo_pool_dhandle); + free_irq(h->intr[SIMPLE_MODE_INT], h); +clean2: +clean1: + h->busy_initializing = 0; + kfree(h); + return -1; +} + +static void hpsa_flush_cache(struct ctlr_info *h) +{ + char *flush_buf; + struct CommandList *c; + + flush_buf = kzalloc(4, GFP_KERNEL); + if (!flush_buf) + return; + + c = cmd_special_alloc(h); + if (!c) { + dev_warn(&h->pdev->dev, "cmd_special_alloc returned NULL!\n"); + goto out_of_memory; + } + fill_cmd(c, HPSA_CACHE_FLUSH, h, flush_buf, 4, 0, + RAID_CTLR_LUNID, TYPE_CMD); + hpsa_scsi_do_simple_cmd_with_retry(h, c, PCI_DMA_TODEVICE); + if (c->err_info->CommandStatus != 0) + dev_warn(&h->pdev->dev, + "error flushing cache on controller\n"); + cmd_special_free(h, c); +out_of_memory: + kfree(flush_buf); +} + +static void hpsa_shutdown(struct pci_dev *pdev) +{ + struct ctlr_info *h; + + h = pci_get_drvdata(pdev); + /* Turn board interrupts off and send the flush cache command + * sendcmd will turn off interrupt, and send the flush... + * To write all data in the battery backed cache to disks + */ + hpsa_flush_cache(h); + h->access.set_intr_mask(h, HPSA_INTR_OFF); + free_irq(h->intr[2], h); +#ifdef CONFIG_PCI_MSI + if (h->msix_vector) + pci_disable_msix(h->pdev); + else if (h->msi_vector) + pci_disable_msi(h->pdev); +#endif /* CONFIG_PCI_MSI */ +} + +static void __devexit hpsa_remove_one(struct pci_dev *pdev) +{ + struct ctlr_info *h; + + if (pci_get_drvdata(pdev) == NULL) { + dev_err(&pdev->dev, "unable to remove device \n"); + return; + } + h = pci_get_drvdata(pdev); + mutex_lock(&h->busy_shutting_down); + remove_from_scan_list(h); + hpsa_unregister_scsi(h); /* unhook from SCSI subsystem */ + hpsa_shutdown(pdev); + iounmap(h->vaddr); + pci_free_consistent(h->pdev, + h->nr_cmds * sizeof(struct CommandList), + h->cmd_pool, h->cmd_pool_dhandle); + pci_free_consistent(h->pdev, + h->nr_cmds * sizeof(struct ErrorInfo), + h->errinfo_pool, h->errinfo_pool_dhandle); + kfree(h->cmd_pool_bits); + /* + * Deliberately omit pci_disable_device(): it does something nasty to + * Smart Array controllers that pci_enable_device does not undo + */ + pci_release_regions(pdev); + pci_set_drvdata(pdev, NULL); + mutex_unlock(&h->busy_shutting_down); + kfree(h); +} + +static int hpsa_suspend(__attribute__((unused)) struct pci_dev *pdev, + __attribute__((unused)) pm_message_t state) +{ + return -ENOSYS; +} + +static int hpsa_resume(__attribute__((unused)) struct pci_dev *pdev) +{ + return -ENOSYS; +} + +static struct pci_driver hpsa_pci_driver = { + .name = "hpsa", + .probe = hpsa_init_one, + .remove = __devexit_p(hpsa_remove_one), + .id_table = hpsa_pci_device_id, /* id_table */ + .shutdown = hpsa_shutdown, + .suspend = hpsa_suspend, + .resume = hpsa_resume, +}; + +/* + * This is it. Register the PCI driver information for the cards we control + * the OS will call our registered routines when it finds one of our cards. + */ +static int __init hpsa_init(void) +{ + int err; + /* Start the scan thread */ + hpsa_scan_thread = kthread_run(hpsa_scan_func, NULL, "hpsa_scan"); + if (IS_ERR(hpsa_scan_thread)) { + err = PTR_ERR(hpsa_scan_thread); + return -ENODEV; + } + err = pci_register_driver(&hpsa_pci_driver); + if (err) + kthread_stop(hpsa_scan_thread); + return err; +} + +static void __exit hpsa_cleanup(void) +{ + pci_unregister_driver(&hpsa_pci_driver); + kthread_stop(hpsa_scan_thread); +} + +module_init(hpsa_init); +module_exit(hpsa_cleanup); diff --git a/drivers/scsi/hpsa.h b/drivers/scsi/hpsa.h new file mode 100644 index 000000000000..6bd1949144b5 --- /dev/null +++ b/drivers/scsi/hpsa.h @@ -0,0 +1,273 @@ +/* + * Disk Array driver for HP Smart Array SAS controllers + * Copyright 2000, 2009 Hewlett-Packard Development Company, L.P. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Questions/Comments/Bugfixes to iss_storagedev@hp.com + * + */ +#ifndef HPSA_H +#define HPSA_H + +#include <scsi/scsicam.h> + +#define IO_OK 0 +#define IO_ERROR 1 + +struct ctlr_info; + +struct access_method { + void (*submit_command)(struct ctlr_info *h, + struct CommandList *c); + void (*set_intr_mask)(struct ctlr_info *h, unsigned long val); + unsigned long (*fifo_full)(struct ctlr_info *h); + unsigned long (*intr_pending)(struct ctlr_info *h); + unsigned long (*command_completed)(struct ctlr_info *h); +}; + +struct hpsa_scsi_dev_t { + int devtype; + int bus, target, lun; /* as presented to the OS */ + unsigned char scsi3addr[8]; /* as presented to the HW */ +#define RAID_CTLR_LUNID "\0\0\0\0\0\0\0\0" + unsigned char device_id[16]; /* from inquiry pg. 0x83 */ + unsigned char vendor[8]; /* bytes 8-15 of inquiry data */ + unsigned char model[16]; /* bytes 16-31 of inquiry data */ + unsigned char revision[4]; /* bytes 32-35 of inquiry data */ + unsigned char raid_level; /* from inquiry page 0xC1 */ +}; + +struct ctlr_info { + int ctlr; + char devname[8]; + char *product_name; + char firm_ver[4]; /* Firmware version */ + struct pci_dev *pdev; + __u32 board_id; + void __iomem *vaddr; + unsigned long paddr; + int nr_cmds; /* Number of commands allowed on this controller */ + struct CfgTable __iomem *cfgtable; + int interrupts_enabled; + int major; + int max_commands; + int commands_outstanding; + int max_outstanding; /* Debug */ + int usage_count; /* number of opens all all minor devices */ +# define DOORBELL_INT 0 +# define PERF_MODE_INT 1 +# define SIMPLE_MODE_INT 2 +# define MEMQ_MODE_INT 3 + unsigned int intr[4]; + unsigned int msix_vector; + unsigned int msi_vector; + struct access_method access; + + /* queue and queue Info */ + struct hlist_head reqQ; + struct hlist_head cmpQ; + unsigned int Qdepth; + unsigned int maxQsinceinit; + unsigned int maxSG; + spinlock_t lock; + + /* pointers to command and error info pool */ + struct CommandList *cmd_pool; + dma_addr_t cmd_pool_dhandle; + struct ErrorInfo *errinfo_pool; + dma_addr_t errinfo_pool_dhandle; + unsigned long *cmd_pool_bits; + int nr_allocs; + int nr_frees; + int busy_initializing; + int busy_scanning; + struct mutex busy_shutting_down; + struct list_head scan_list; + struct completion scan_wait; + + struct Scsi_Host *scsi_host; + spinlock_t devlock; /* to protect hba[ctlr]->dev[]; */ + int ndevices; /* number of used elements in .dev[] array. */ +#define HPSA_MAX_SCSI_DEVS_PER_HBA 256 + struct hpsa_scsi_dev_t *dev[HPSA_MAX_SCSI_DEVS_PER_HBA]; +}; +#define HPSA_ABORT_MSG 0 +#define HPSA_DEVICE_RESET_MSG 1 +#define HPSA_BUS_RESET_MSG 2 +#define HPSA_HOST_RESET_MSG 3 +#define HPSA_MSG_SEND_RETRY_LIMIT 10 +#define HPSA_MSG_SEND_RETRY_INTERVAL_MSECS 1000 + +/* Maximum time in seconds driver will wait for command completions + * when polling before giving up. + */ +#define HPSA_MAX_POLL_TIME_SECS (20) + +/* During SCSI error recovery, HPSA_TUR_RETRY_LIMIT defines + * how many times to retry TEST UNIT READY on a device + * while waiting for it to become ready before giving up. + * HPSA_MAX_WAIT_INTERVAL_SECS is the max wait interval + * between sending TURs while waiting for a device + * to become ready. + */ +#define HPSA_TUR_RETRY_LIMIT (20) +#define HPSA_MAX_WAIT_INTERVAL_SECS (30) + +/* HPSA_BOARD_READY_WAIT_SECS is how long to wait for a board + * to become ready, in seconds, before giving up on it. + * HPSA_BOARD_READY_POLL_INTERVAL_MSECS * is how long to wait + * between polling the board to see if it is ready, in + * milliseconds. HPSA_BOARD_READY_POLL_INTERVAL and + * HPSA_BOARD_READY_ITERATIONS are derived from those. + */ +#define HPSA_BOARD_READY_WAIT_SECS (120) +#define HPSA_BOARD_READY_POLL_INTERVAL_MSECS (100) +#define HPSA_BOARD_READY_POLL_INTERVAL \ + ((HPSA_BOARD_READY_POLL_INTERVAL_MSECS * HZ) / 1000) +#define HPSA_BOARD_READY_ITERATIONS \ + ((HPSA_BOARD_READY_WAIT_SECS * 1000) / \ + HPSA_BOARD_READY_POLL_INTERVAL_MSECS) +#define HPSA_POST_RESET_PAUSE_MSECS (3000) +#define HPSA_POST_RESET_NOOP_RETRIES (12) + +/* Defining the diffent access_menthods */ +/* + * Memory mapped FIFO interface (SMART 53xx cards) + */ +#define SA5_DOORBELL 0x20 +#define SA5_REQUEST_PORT_OFFSET 0x40 +#define SA5_REPLY_INTR_MASK_OFFSET 0x34 +#define SA5_REPLY_PORT_OFFSET 0x44 +#define SA5_INTR_STATUS 0x30 +#define SA5_SCRATCHPAD_OFFSET 0xB0 + +#define SA5_CTCFG_OFFSET 0xB4 +#define SA5_CTMEM_OFFSET 0xB8 + +#define SA5_INTR_OFF 0x08 +#define SA5B_INTR_OFF 0x04 +#define SA5_INTR_PENDING 0x08 +#define SA5B_INTR_PENDING 0x04 +#define FIFO_EMPTY 0xffffffff +#define HPSA_FIRMWARE_READY 0xffff0000 /* value in scratchpad register */ + +#define HPSA_ERROR_BIT 0x02 +#define HPSA_TAG_CONTAINS_INDEX(tag) ((tag) & 0x04) +#define HPSA_TAG_TO_INDEX(tag) ((tag) >> 3) +#define HPSA_TAG_DISCARD_ERROR_BITS(tag) ((tag) & ~3) + +#define HPSA_INTR_ON 1 +#define HPSA_INTR_OFF 0 +/* + Send the command to the hardware +*/ +static void SA5_submit_command(struct ctlr_info *h, + struct CommandList *c) +{ +#ifdef HPSA_DEBUG + printk(KERN_WARNING "hpsa: Sending %x - down to controller\n", + c->busaddr); +#endif /* HPSA_DEBUG */ + writel(c->busaddr, h->vaddr + SA5_REQUEST_PORT_OFFSET); + h->commands_outstanding++; + if (h->commands_outstanding > h->max_outstanding) + h->max_outstanding = h->commands_outstanding; +} + +/* + * This card is the opposite of the other cards. + * 0 turns interrupts on... + * 0x08 turns them off... + */ +static void SA5_intr_mask(struct ctlr_info *h, unsigned long val) +{ + if (val) { /* Turn interrupts on */ + h->interrupts_enabled = 1; + writel(0, h->vaddr + SA5_REPLY_INTR_MASK_OFFSET); + } else { /* Turn them off */ + h->interrupts_enabled = 0; + writel(SA5_INTR_OFF, + h->vaddr + SA5_REPLY_INTR_MASK_OFFSET); + } +} +/* + * Returns true if fifo is full. + * + */ +static unsigned long SA5_fifo_full(struct ctlr_info *h) +{ + if (h->commands_outstanding >= h->max_commands) + return 1; + else + return 0; + +} +/* + * returns value read from hardware. + * returns FIFO_EMPTY if there is nothing to read + */ +static unsigned long SA5_completed(struct ctlr_info *h) +{ + unsigned long register_value + = readl(h->vaddr + SA5_REPLY_PORT_OFFSET); + + if (register_value != FIFO_EMPTY) + h->commands_outstanding--; + +#ifdef HPSA_DEBUG + if (register_value != FIFO_EMPTY) + printk(KERN_INFO "hpsa: Read %lx back from board\n", + register_value); + else + printk(KERN_INFO "hpsa: FIFO Empty read\n"); +#endif + + return register_value; +} +/* + * Returns true if an interrupt is pending.. + */ +static unsigned long SA5_intr_pending(struct ctlr_info *h) +{ + unsigned long register_value = + readl(h->vaddr + SA5_INTR_STATUS); +#ifdef HPSA_DEBUG + printk(KERN_INFO "hpsa: intr_pending %lx\n", register_value); +#endif /* HPSA_DEBUG */ + if (register_value & SA5_INTR_PENDING) + return 1; + return 0 ; +} + + +static struct access_method SA5_access = { + SA5_submit_command, + SA5_intr_mask, + SA5_fifo_full, + SA5_intr_pending, + SA5_completed, +}; + +struct board_type { + __u32 board_id; + char *product_name; + struct access_method *access; +}; + + +/* end of old hpsa_scsi.h file */ + +#endif /* HPSA_H */ + diff --git a/drivers/scsi/hpsa_cmd.h b/drivers/scsi/hpsa_cmd.h new file mode 100644 index 000000000000..12d71387ed9a --- /dev/null +++ b/drivers/scsi/hpsa_cmd.h @@ -0,0 +1,326 @@ +/* + * Disk Array driver for HP Smart Array SAS controllers + * Copyright 2000, 2009 Hewlett-Packard Development Company, L.P. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Questions/Comments/Bugfixes to iss_storagedev@hp.com + * + */ +#ifndef HPSA_CMD_H +#define HPSA_CMD_H + +/* general boundary defintions */ +#define SENSEINFOBYTES 32 /* may vary between hbas */ +#define MAXSGENTRIES 31 +#define MAXREPLYQS 256 + +/* Command Status value */ +#define CMD_SUCCESS 0x0000 +#define CMD_TARGET_STATUS 0x0001 +#define CMD_DATA_UNDERRUN 0x0002 +#define CMD_DATA_OVERRUN 0x0003 +#define CMD_INVALID 0x0004 +#define CMD_PROTOCOL_ERR 0x0005 +#define CMD_HARDWARE_ERR 0x0006 +#define CMD_CONNECTION_LOST 0x0007 +#define CMD_ABORTED 0x0008 +#define CMD_ABORT_FAILED 0x0009 +#define CMD_UNSOLICITED_ABORT 0x000A +#define CMD_TIMEOUT 0x000B +#define CMD_UNABORTABLE 0x000C + +/* Unit Attentions ASC's as defined for the MSA2012sa */ +#define POWER_OR_RESET 0x29 +#define STATE_CHANGED 0x2a +#define UNIT_ATTENTION_CLEARED 0x2f +#define LUN_FAILED 0x3e +#define REPORT_LUNS_CHANGED 0x3f + +/* Unit Attentions ASCQ's as defined for the MSA2012sa */ + + /* These ASCQ's defined for ASC = POWER_OR_RESET */ +#define POWER_ON_RESET 0x00 +#define POWER_ON_REBOOT 0x01 +#define SCSI_BUS_RESET 0x02 +#define MSA_TARGET_RESET 0x03 +#define CONTROLLER_FAILOVER 0x04 +#define TRANSCEIVER_SE 0x05 +#define TRANSCEIVER_LVD 0x06 + + /* These ASCQ's defined for ASC = STATE_CHANGED */ +#define RESERVATION_PREEMPTED 0x03 +#define ASYM_ACCESS_CHANGED 0x06 +#define LUN_CAPACITY_CHANGED 0x09 + +/* transfer direction */ +#define XFER_NONE 0x00 +#define XFER_WRITE 0x01 +#define XFER_READ 0x02 +#define XFER_RSVD 0x03 + +/* task attribute */ +#define ATTR_UNTAGGED 0x00 +#define ATTR_SIMPLE 0x04 +#define ATTR_HEADOFQUEUE 0x05 +#define ATTR_ORDERED 0x06 +#define ATTR_ACA 0x07 + +/* cdb type */ +#define TYPE_CMD 0x00 +#define TYPE_MSG 0x01 + +/* config space register offsets */ +#define CFG_VENDORID 0x00 +#define CFG_DEVICEID 0x02 +#define CFG_I2OBAR 0x10 +#define CFG_MEM1BAR 0x14 + +/* i2o space register offsets */ +#define I2O_IBDB_SET 0x20 +#define I2O_IBDB_CLEAR 0x70 +#define I2O_INT_STATUS 0x30 +#define I2O_INT_MASK 0x34 +#define I2O_IBPOST_Q 0x40 +#define I2O_OBPOST_Q 0x44 +#define I2O_DMA1_CFG 0x214 + +/* Configuration Table */ +#define CFGTBL_ChangeReq 0x00000001l +#define CFGTBL_AccCmds 0x00000001l + +#define CFGTBL_Trans_Simple 0x00000002l + +#define CFGTBL_BusType_Ultra2 0x00000001l +#define CFGTBL_BusType_Ultra3 0x00000002l +#define CFGTBL_BusType_Fibre1G 0x00000100l +#define CFGTBL_BusType_Fibre2G 0x00000200l +struct vals32 { + __u32 lower; + __u32 upper; +}; + +union u64bit { + struct vals32 val32; + __u64 val; +}; + +/* FIXME this is a per controller value (barf!) */ +#define HPSA_MAX_TARGETS_PER_CTLR 16 +#define HPSA_MAX_LUN 256 +#define HPSA_MAX_PHYS_LUN 1024 + +/* SCSI-3 Commands */ +#pragma pack(1) + +#define HPSA_INQUIRY 0x12 +struct InquiryData { + __u8 data_byte[36]; +}; + +#define HPSA_REPORT_LOG 0xc2 /* Report Logical LUNs */ +#define HPSA_REPORT_PHYS 0xc3 /* Report Physical LUNs */ +struct ReportLUNdata { + __u8 LUNListLength[4]; + __u32 reserved; + __u8 LUN[HPSA_MAX_LUN][8]; +}; + +struct ReportExtendedLUNdata { + __u8 LUNListLength[4]; + __u8 extended_response_flag; + __u8 reserved[3]; + __u8 LUN[HPSA_MAX_LUN][24]; +}; + +struct SenseSubsystem_info { + __u8 reserved[36]; + __u8 portname[8]; + __u8 reserved1[1108]; +}; + +#define HPSA_READ_CAPACITY 0x25 /* Read Capacity */ +struct ReadCapdata { + __u8 total_size[4]; /* Total size in blocks */ + __u8 block_size[4]; /* Size of blocks in bytes */ +}; + +#if 0 +/* 12 byte commands not implemented in firmware yet. */ +#define HPSA_READ 0xa8 +#define HPSA_WRITE 0xaa +#endif + +#define HPSA_READ 0x28 /* Read(10) */ +#define HPSA_WRITE 0x2a /* Write(10) */ + +/* BMIC commands */ +#define BMIC_READ 0x26 +#define BMIC_WRITE 0x27 +#define BMIC_CACHE_FLUSH 0xc2 +#define HPSA_CACHE_FLUSH 0x01 /* C2 was already being used by HPSA */ + +/* Command List Structure */ +union SCSI3Addr { + struct { + __u8 Dev; + __u8 Bus:6; + __u8 Mode:2; /* b00 */ + } PeripDev; + struct { + __u8 DevLSB; + __u8 DevMSB:6; + __u8 Mode:2; /* b01 */ + } LogDev; + struct { + __u8 Dev:5; + __u8 Bus:3; + __u8 Targ:6; + __u8 Mode:2; /* b10 */ + } LogUnit; +}; + +struct PhysDevAddr { + __u32 TargetId:24; + __u32 Bus:6; + __u32 Mode:2; + /* 2 level target device addr */ + union SCSI3Addr Target[2]; +}; + +struct LogDevAddr { + __u32 VolId:30; + __u32 Mode:2; + __u8 reserved[4]; +}; + +union LUNAddr { + __u8 LunAddrBytes[8]; + union SCSI3Addr SCSI3Lun[4]; + struct PhysDevAddr PhysDev; + struct LogDevAddr LogDev; +}; + +struct CommandListHeader { + __u8 ReplyQueue; + __u8 SGList; + __u16 SGTotal; + struct vals32 Tag; + union LUNAddr LUN; +}; + +struct RequestBlock { + __u8 CDBLen; + struct { + __u8 Type:3; + __u8 Attribute:3; + __u8 Direction:2; + } Type; + __u16 Timeout; + __u8 CDB[16]; +}; + +struct ErrDescriptor { + struct vals32 Addr; + __u32 Len; +}; + +struct SGDescriptor { + struct vals32 Addr; + __u32 Len; + __u32 Ext; +}; + +union MoreErrInfo { + struct { + __u8 Reserved[3]; + __u8 Type; + __u32 ErrorInfo; + } Common_Info; + struct { + __u8 Reserved[2]; + __u8 offense_size; /* size of offending entry */ + __u8 offense_num; /* byte # of offense 0-base */ + __u32 offense_value; + } Invalid_Cmd; +}; +struct ErrorInfo { + __u8 ScsiStatus; + __u8 SenseLen; + __u16 CommandStatus; + __u32 ResidualCnt; + union MoreErrInfo MoreErrInfo; + __u8 SenseInfo[SENSEINFOBYTES]; +}; +/* Command types */ +#define CMD_IOCTL_PEND 0x01 +#define CMD_SCSI 0x03 + +struct ctlr_info; /* defined in hpsa.h */ +/* The size of this structure needs to be divisible by 8 + * od on all architectures, because the controller uses 2 + * lower bits of the address, and the driver uses 1 lower + * bit (3 bits total.) + */ +struct CommandList { + struct CommandListHeader Header; + struct RequestBlock Request; + struct ErrDescriptor ErrDesc; + struct SGDescriptor SG[MAXSGENTRIES]; + /* information associated with the command */ + __u32 busaddr; /* physical addr of this record */ + struct ErrorInfo *err_info; /* pointer to the allocated mem */ + struct ctlr_info *h; + int cmd_type; + long cmdindex; + struct hlist_node list; + struct CommandList *prev; + struct CommandList *next; + struct request *rq; + struct completion *waiting; + int retry_count; + void *scsi_cmd; +}; + +/* Configuration Table Structure */ +struct HostWrite { + __u32 TransportRequest; + __u32 Reserved; + __u32 CoalIntDelay; + __u32 CoalIntCount; +}; + +struct CfgTable { + __u8 Signature[4]; + __u32 SpecValence; + __u32 TransportSupport; + __u32 TransportActive; + struct HostWrite HostWrite; + __u32 CmdsOutMax; + __u32 BusTypes; + __u32 Reserved; + __u8 ServerName[16]; + __u32 HeartBeat; + __u32 SCSI_Prefetch; +}; + +struct hpsa_pci_info { + unsigned char bus; + unsigned char dev_fn; + unsigned short domain; + __u32 board_id; +}; + +#pragma pack() +#endif /* HPSA_CMD_H */ diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c index 8643f5089361..9e52d16c7c39 100644 --- a/drivers/scsi/ipr.c +++ b/drivers/scsi/ipr.c @@ -6521,6 +6521,7 @@ static int ipr_reset_restore_cfg_space(struct ipr_cmnd *ipr_cmd) int rc; ENTER; + ioa_cfg->pdev->state_saved = true; rc = pci_restore_state(ioa_cfg->pdev); if (rc != PCIBIOS_SUCCESSFUL) { diff --git a/drivers/scsi/libfc/fc_fcp.c b/drivers/scsi/libfc/fc_fcp.c index c4b58d042f6f..881d5dfe8c74 100644 --- a/drivers/scsi/libfc/fc_fcp.c +++ b/drivers/scsi/libfc/fc_fcp.c @@ -68,18 +68,20 @@ struct kmem_cache *scsi_pkt_cachep; /** * struct fc_fcp_internal - FCP layer internal data - * @scsi_pkt_pool: Memory pool to draw FCP packets from + * @scsi_pkt_pool: Memory pool to draw FCP packets from + * @scsi_queue_lock: Protects the scsi_pkt_queue * @scsi_pkt_queue: Current FCP packets * @last_can_queue_ramp_down_time: ramp down time * @last_can_queue_ramp_up_time: ramp up time * @max_can_queue: max can_queue size */ struct fc_fcp_internal { - mempool_t *scsi_pkt_pool; - struct list_head scsi_pkt_queue; - unsigned long last_can_queue_ramp_down_time; - unsigned long last_can_queue_ramp_up_time; - int max_can_queue; + mempool_t *scsi_pkt_pool; + spinlock_t scsi_queue_lock; + struct list_head scsi_pkt_queue; + unsigned long last_can_queue_ramp_down_time; + unsigned long last_can_queue_ramp_up_time; + int max_can_queue; }; #define fc_get_scsi_internal(x) ((struct fc_fcp_internal *)(x)->scsi_priv) @@ -410,12 +412,14 @@ static inline struct fc_frame *fc_fcp_frame_alloc(struct fc_lport *lport, unsigned long flags; fp = fc_frame_alloc(lport, len); - if (!fp) { - spin_lock_irqsave(lport->host->host_lock, flags); - fc_fcp_can_queue_ramp_down(lport); - spin_unlock_irqrestore(lport->host->host_lock, flags); - } - return fp; + if (likely(fp)) + return fp; + + /* error case */ + spin_lock_irqsave(lport->host->host_lock, flags); + fc_fcp_can_queue_ramp_down(lport); + spin_unlock_irqrestore(lport->host->host_lock, flags); + return NULL; } /** @@ -990,7 +994,7 @@ static void fc_fcp_cleanup_each_cmd(struct fc_lport *lport, unsigned int id, struct scsi_cmnd *sc_cmd; unsigned long flags; - spin_lock_irqsave(lport->host->host_lock, flags); + spin_lock_irqsave(&si->scsi_queue_lock, flags); restart: list_for_each_entry(fsp, &si->scsi_pkt_queue, list) { sc_cmd = fsp->cmd; @@ -1001,7 +1005,7 @@ restart: continue; fc_fcp_pkt_hold(fsp); - spin_unlock_irqrestore(lport->host->host_lock, flags); + spin_unlock_irqrestore(&si->scsi_queue_lock, flags); if (!fc_fcp_lock_pkt(fsp)) { fc_fcp_cleanup_cmd(fsp, error); @@ -1010,14 +1014,14 @@ restart: } fc_fcp_pkt_release(fsp); - spin_lock_irqsave(lport->host->host_lock, flags); + spin_lock_irqsave(&si->scsi_queue_lock, flags); /* * while we dropped the lock multiple pkts could * have been released, so we have to start over. */ goto restart; } - spin_unlock_irqrestore(lport->host->host_lock, flags); + spin_unlock_irqrestore(&si->scsi_queue_lock, flags); } /** @@ -1035,11 +1039,12 @@ static void fc_fcp_abort_io(struct fc_lport *lport) * @fsp: The FCP packet to send * * Return: Zero for success and -1 for failure - * Locks: Called with the host lock and irqs disabled. + * Locks: Called without locks held */ static int fc_fcp_pkt_send(struct fc_lport *lport, struct fc_fcp_pkt *fsp) { struct fc_fcp_internal *si = fc_get_scsi_internal(lport); + unsigned long flags; int rc; fsp->cmd->SCp.ptr = (char *)fsp; @@ -1049,13 +1054,16 @@ static int fc_fcp_pkt_send(struct fc_lport *lport, struct fc_fcp_pkt *fsp) int_to_scsilun(fsp->cmd->device->lun, (struct scsi_lun *)fsp->cdb_cmd.fc_lun); memcpy(fsp->cdb_cmd.fc_cdb, fsp->cmd->cmnd, fsp->cmd->cmd_len); - list_add_tail(&fsp->list, &si->scsi_pkt_queue); - spin_unlock_irq(lport->host->host_lock); + spin_lock_irqsave(&si->scsi_queue_lock, flags); + list_add_tail(&fsp->list, &si->scsi_pkt_queue); + spin_unlock_irqrestore(&si->scsi_queue_lock, flags); rc = lport->tt.fcp_cmd_send(lport, fsp, fc_fcp_recv); - spin_lock_irq(lport->host->host_lock); - if (rc) + if (unlikely(rc)) { + spin_lock_irqsave(&si->scsi_queue_lock, flags); list_del(&fsp->list); + spin_unlock_irqrestore(&si->scsi_queue_lock, flags); + } return rc; } @@ -1752,6 +1760,7 @@ int fc_queuecommand(struct scsi_cmnd *sc_cmd, void (*done)(struct scsi_cmnd *)) struct fcoe_dev_stats *stats; lport = shost_priv(sc_cmd->device->host); + spin_unlock_irq(lport->host->host_lock); rval = fc_remote_port_chkready(rport); if (rval) { @@ -1834,6 +1843,7 @@ int fc_queuecommand(struct scsi_cmnd *sc_cmd, void (*done)(struct scsi_cmnd *)) rc = SCSI_MLQUEUE_HOST_BUSY; } out: + spin_lock_irq(lport->host->host_lock); return rc; } EXPORT_SYMBOL(fc_queuecommand); @@ -1864,11 +1874,8 @@ static void fc_io_compl(struct fc_fcp_pkt *fsp) lport = fsp->lp; si = fc_get_scsi_internal(lport); - spin_lock_irqsave(lport->host->host_lock, flags); - if (!fsp->cmd) { - spin_unlock_irqrestore(lport->host->host_lock, flags); + if (!fsp->cmd) return; - } /* * if can_queue ramp down is done then try can_queue ramp up @@ -1880,10 +1887,8 @@ static void fc_io_compl(struct fc_fcp_pkt *fsp) sc_cmd = fsp->cmd; fsp->cmd = NULL; - if (!sc_cmd->SCp.ptr) { - spin_unlock_irqrestore(lport->host->host_lock, flags); + if (!sc_cmd->SCp.ptr) return; - } CMD_SCSI_STATUS(sc_cmd) = fsp->cdb_status; switch (fsp->status_code) { @@ -1945,10 +1950,11 @@ static void fc_io_compl(struct fc_fcp_pkt *fsp) break; } + spin_lock_irqsave(&si->scsi_queue_lock, flags); list_del(&fsp->list); + spin_unlock_irqrestore(&si->scsi_queue_lock, flags); sc_cmd->SCp.ptr = NULL; sc_cmd->scsi_done(sc_cmd); - spin_unlock_irqrestore(lport->host->host_lock, flags); /* release ref from initial allocation in queue command */ fc_fcp_pkt_release(fsp); @@ -2216,6 +2222,7 @@ int fc_fcp_init(struct fc_lport *lport) lport->scsi_priv = si; si->max_can_queue = lport->host->can_queue; INIT_LIST_HEAD(&si->scsi_pkt_queue); + spin_lock_init(&si->scsi_queue_lock); si->scsi_pkt_pool = mempool_create_slab_pool(2, scsi_pkt_cachep); if (!si->scsi_pkt_pool) { diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c index 74338c83ad0a..0b165024a219 100644 --- a/drivers/scsi/libfc/fc_lport.c +++ b/drivers/scsi/libfc/fc_lport.c @@ -537,7 +537,9 @@ int fc_fabric_login(struct fc_lport *lport) int rc = -1; mutex_lock(&lport->lp_mutex); - if (lport->state == LPORT_ST_DISABLED) { + if (lport->state == LPORT_ST_DISABLED || + lport->state == LPORT_ST_LOGO) { + fc_lport_state_enter(lport, LPORT_ST_RESET); fc_lport_enter_reset(lport); rc = 0; } @@ -967,6 +969,9 @@ static void fc_lport_enter_reset(struct fc_lport *lport) FC_LPORT_DBG(lport, "Entered RESET state from %s state\n", fc_lport_state(lport)); + if (lport->state == LPORT_ST_DISABLED || lport->state == LPORT_ST_LOGO) + return; + if (lport->vport) { if (lport->link_up) fc_vport_set_state(lport->vport, FC_VPORT_INITIALIZING); diff --git a/drivers/scsi/libfc/fc_rport.c b/drivers/scsi/libfc/fc_rport.c index 35ca0e72df46..02300523b234 100644 --- a/drivers/scsi/libfc/fc_rport.c +++ b/drivers/scsi/libfc/fc_rport.c @@ -310,6 +310,7 @@ static void fc_rport_work(struct work_struct *work) restart = 1; else list_del(&rdata->peers); + rdata->event = RPORT_EV_NONE; mutex_unlock(&rdata->rp_mutex); mutex_unlock(&lport->disc.disc_mutex); } diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c index b7689f3d05f5..c28a712fd4db 100644 --- a/drivers/scsi/libiscsi.c +++ b/drivers/scsi/libiscsi.c @@ -517,7 +517,7 @@ static void iscsi_free_task(struct iscsi_task *task) if (conn->login_task == task) return; - __kfifo_put(session->cmdpool.queue, (void*)&task, sizeof(void*)); + kfifo_in(&session->cmdpool.queue, (void*)&task, sizeof(void*)); if (sc) { task->sc = NULL; @@ -737,7 +737,7 @@ __iscsi_conn_send_pdu(struct iscsi_conn *conn, struct iscsi_hdr *hdr, BUG_ON(conn->c_stage == ISCSI_CONN_INITIAL_STAGE); BUG_ON(conn->c_stage == ISCSI_CONN_STOPPED); - if (!__kfifo_get(session->cmdpool.queue, + if (!kfifo_out(&session->cmdpool.queue, (void*)&task, sizeof(void*))) return NULL; } @@ -1567,7 +1567,7 @@ static inline struct iscsi_task *iscsi_alloc_task(struct iscsi_conn *conn, { struct iscsi_task *task; - if (!__kfifo_get(conn->session->cmdpool.queue, + if (!kfifo_out(&conn->session->cmdpool.queue, (void *) &task, sizeof(void *))) return NULL; @@ -2461,12 +2461,7 @@ iscsi_pool_init(struct iscsi_pool *q, int max, void ***items, int item_size) if (q->pool == NULL) return -ENOMEM; - q->queue = kfifo_init((void*)q->pool, max * sizeof(void*), - GFP_KERNEL, NULL); - if (IS_ERR(q->queue)) { - q->queue = NULL; - goto enomem; - } + kfifo_init(&q->queue, (void*)q->pool, max * sizeof(void*)); for (i = 0; i < max; i++) { q->pool[i] = kzalloc(item_size, GFP_KERNEL); @@ -2474,7 +2469,7 @@ iscsi_pool_init(struct iscsi_pool *q, int max, void ***items, int item_size) q->max = i; goto enomem; } - __kfifo_put(q->queue, (void*)&q->pool[i], sizeof(void*)); + kfifo_in(&q->queue, (void*)&q->pool[i], sizeof(void*)); } if (items) { @@ -2497,7 +2492,6 @@ void iscsi_pool_free(struct iscsi_pool *q) for (i = 0; i < q->max; i++) kfree(q->pool[i]); kfree(q->pool); - kfree(q->queue); } EXPORT_SYMBOL_GPL(iscsi_pool_free); @@ -2825,7 +2819,7 @@ iscsi_conn_setup(struct iscsi_cls_session *cls_session, int dd_size, /* allocate login_task used for the login/text sequences */ spin_lock_bh(&session->lock); - if (!__kfifo_get(session->cmdpool.queue, + if (!kfifo_out(&session->cmdpool.queue, (void*)&conn->login_task, sizeof(void*))) { spin_unlock_bh(&session->lock); @@ -2845,7 +2839,7 @@ iscsi_conn_setup(struct iscsi_cls_session *cls_session, int dd_size, return cls_conn; login_task_data_alloc_fail: - __kfifo_put(session->cmdpool.queue, (void*)&conn->login_task, + kfifo_in(&session->cmdpool.queue, (void*)&conn->login_task, sizeof(void*)); login_task_alloc_fail: iscsi_destroy_conn(cls_conn); @@ -2908,7 +2902,7 @@ void iscsi_conn_teardown(struct iscsi_cls_conn *cls_conn) free_pages((unsigned long) conn->data, get_order(ISCSI_DEF_MAX_RECV_SEG_LEN)); kfree(conn->persistent_address); - __kfifo_put(session->cmdpool.queue, (void*)&conn->login_task, + kfifo_in(&session->cmdpool.queue, (void*)&conn->login_task, sizeof(void*)); if (session->leadconn == conn) session->leadconn = NULL; diff --git a/drivers/scsi/libiscsi_tcp.c b/drivers/scsi/libiscsi_tcp.c index ca25ee5190b0..db6856c138fc 100644 --- a/drivers/scsi/libiscsi_tcp.c +++ b/drivers/scsi/libiscsi_tcp.c @@ -445,15 +445,15 @@ void iscsi_tcp_cleanup_task(struct iscsi_task *task) return; /* flush task's r2t queues */ - while (__kfifo_get(tcp_task->r2tqueue, (void*)&r2t, sizeof(void*))) { - __kfifo_put(tcp_task->r2tpool.queue, (void*)&r2t, + while (kfifo_out(&tcp_task->r2tqueue, (void*)&r2t, sizeof(void*))) { + kfifo_in(&tcp_task->r2tpool.queue, (void*)&r2t, sizeof(void*)); ISCSI_DBG_TCP(task->conn, "pending r2t dropped\n"); } r2t = tcp_task->r2t; if (r2t != NULL) { - __kfifo_put(tcp_task->r2tpool.queue, (void*)&r2t, + kfifo_in(&tcp_task->r2tpool.queue, (void*)&r2t, sizeof(void*)); tcp_task->r2t = NULL; } @@ -541,7 +541,7 @@ static int iscsi_tcp_r2t_rsp(struct iscsi_conn *conn, struct iscsi_task *task) return 0; } - rc = __kfifo_get(tcp_task->r2tpool.queue, (void*)&r2t, sizeof(void*)); + rc = kfifo_out(&tcp_task->r2tpool.queue, (void*)&r2t, sizeof(void*)); if (!rc) { iscsi_conn_printk(KERN_ERR, conn, "Could not allocate R2T. " "Target has sent more R2Ts than it " @@ -554,7 +554,7 @@ static int iscsi_tcp_r2t_rsp(struct iscsi_conn *conn, struct iscsi_task *task) if (r2t->data_length == 0) { iscsi_conn_printk(KERN_ERR, conn, "invalid R2T with zero data len\n"); - __kfifo_put(tcp_task->r2tpool.queue, (void*)&r2t, + kfifo_in(&tcp_task->r2tpool.queue, (void*)&r2t, sizeof(void*)); return ISCSI_ERR_DATALEN; } @@ -570,7 +570,7 @@ static int iscsi_tcp_r2t_rsp(struct iscsi_conn *conn, struct iscsi_task *task) "invalid R2T with data len %u at offset %u " "and total length %d\n", r2t->data_length, r2t->data_offset, scsi_out(task->sc)->length); - __kfifo_put(tcp_task->r2tpool.queue, (void*)&r2t, + kfifo_in(&tcp_task->r2tpool.queue, (void*)&r2t, sizeof(void*)); return ISCSI_ERR_DATALEN; } @@ -580,7 +580,7 @@ static int iscsi_tcp_r2t_rsp(struct iscsi_conn *conn, struct iscsi_task *task) r2t->sent = 0; tcp_task->exp_datasn = r2tsn + 1; - __kfifo_put(tcp_task->r2tqueue, (void*)&r2t, sizeof(void*)); + kfifo_in(&tcp_task->r2tqueue, (void*)&r2t, sizeof(void*)); conn->r2t_pdus_cnt++; iscsi_requeue_task(task); @@ -951,7 +951,7 @@ int iscsi_tcp_task_init(struct iscsi_task *task) return conn->session->tt->init_pdu(task, 0, task->data_count); } - BUG_ON(__kfifo_len(tcp_task->r2tqueue)); + BUG_ON(kfifo_len(&tcp_task->r2tqueue)); tcp_task->exp_datasn = 0; /* Prepare PDU, optionally w/ immediate data */ @@ -982,7 +982,7 @@ static struct iscsi_r2t_info *iscsi_tcp_get_curr_r2t(struct iscsi_task *task) if (r2t->data_length <= r2t->sent) { ISCSI_DBG_TCP(task->conn, " done with r2t %p\n", r2t); - __kfifo_put(tcp_task->r2tpool.queue, + kfifo_in(&tcp_task->r2tpool.queue, (void *)&tcp_task->r2t, sizeof(void *)); tcp_task->r2t = r2t = NULL; @@ -990,8 +990,13 @@ static struct iscsi_r2t_info *iscsi_tcp_get_curr_r2t(struct iscsi_task *task) } if (r2t == NULL) { - __kfifo_get(tcp_task->r2tqueue, - (void *)&tcp_task->r2t, sizeof(void *)); + if (kfifo_out(&tcp_task->r2tqueue, + (void *)&tcp_task->r2t, sizeof(void *)) != + sizeof(void *)) { + WARN_ONCE(1, "unexpected fifo state"); + r2t = NULL; + } + r2t = tcp_task->r2t; } spin_unlock_bh(&session->lock); @@ -1127,9 +1132,8 @@ int iscsi_tcp_r2tpool_alloc(struct iscsi_session *session) } /* R2T xmit queue */ - tcp_task->r2tqueue = kfifo_alloc( - session->max_r2t * 4 * sizeof(void*), GFP_KERNEL, NULL); - if (tcp_task->r2tqueue == ERR_PTR(-ENOMEM)) { + if (kfifo_alloc(&tcp_task->r2tqueue, + session->max_r2t * 4 * sizeof(void*), GFP_KERNEL)) { iscsi_pool_free(&tcp_task->r2tpool); goto r2t_alloc_fail; } @@ -1142,7 +1146,7 @@ r2t_alloc_fail: struct iscsi_task *task = session->cmds[i]; struct iscsi_tcp_task *tcp_task = task->dd_data; - kfifo_free(tcp_task->r2tqueue); + kfifo_free(&tcp_task->r2tqueue); iscsi_pool_free(&tcp_task->r2tpool); } return -ENOMEM; @@ -1157,7 +1161,7 @@ void iscsi_tcp_r2tpool_free(struct iscsi_session *session) struct iscsi_task *task = session->cmds[i]; struct iscsi_tcp_task *tcp_task = task->dd_data; - kfifo_free(tcp_task->r2tqueue); + kfifo_free(&tcp_task->r2tqueue); iscsi_pool_free(&tcp_task->r2tpool); } } diff --git a/drivers/scsi/libsrp.c b/drivers/scsi/libsrp.c index 9ad38e81e343..ab19b3b4be52 100644 --- a/drivers/scsi/libsrp.c +++ b/drivers/scsi/libsrp.c @@ -58,19 +58,15 @@ static int srp_iu_pool_alloc(struct srp_queue *q, size_t max, goto free_pool; spin_lock_init(&q->lock); - q->queue = kfifo_init((void *) q->pool, max * sizeof(void *), - GFP_KERNEL, &q->lock); - if (IS_ERR(q->queue)) - goto free_item; + kfifo_init(&q->queue, (void *) q->pool, max * sizeof(void *)); for (i = 0, iue = q->items; i < max; i++) { - __kfifo_put(q->queue, (void *) &iue, sizeof(void *)); + kfifo_in(&q->queue, (void *) &iue, sizeof(void *)); iue->sbuf = ring[i]; iue++; } return 0; -free_item: kfree(q->items); free_pool: kfree(q->pool); @@ -167,7 +163,11 @@ struct iu_entry *srp_iu_get(struct srp_target *target) { struct iu_entry *iue = NULL; - kfifo_get(target->iu_queue.queue, (void *) &iue, sizeof(void *)); + if (kfifo_out_locked(&target->iu_queue.queue, (void *) &iue, + sizeof(void *), &target->iu_queue.lock) != sizeof(void *)) { + WARN_ONCE(1, "unexpected fifo state"); + return NULL; + } if (!iue) return iue; iue->target = target; @@ -179,7 +179,8 @@ EXPORT_SYMBOL_GPL(srp_iu_get); void srp_iu_put(struct iu_entry *iue) { - kfifo_put(iue->target->iu_queue.queue, (void *) &iue, sizeof(void *)); + kfifo_in_locked(&iue->target->iu_queue.queue, (void *) &iue, + sizeof(void *), &iue->target->iu_queue.lock); } EXPORT_SYMBOL_GPL(srp_iu_put); diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index 226920d15ea1..d4da6bdd0e73 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -4506,9 +4506,13 @@ lpfc_sli_pci_mem_setup(struct lpfc_hba *phba) pdev = phba->pcidev; /* Set the device DMA mask size */ - if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) != 0) - if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0) + if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) != 0 + || pci_set_consistent_dma_mask(pdev,DMA_BIT_MASK(64)) != 0) { + if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0 + || pci_set_consistent_dma_mask(pdev,DMA_BIT_MASK(32)) != 0) { return error; + } + } /* Get the bus address of Bar0 and Bar2 and the number of bytes * required by each mapping. @@ -6021,9 +6025,13 @@ lpfc_sli4_pci_mem_setup(struct lpfc_hba *phba) pdev = phba->pcidev; /* Set the device DMA mask size */ - if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) != 0) - if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0) + if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) != 0 + || pci_set_consistent_dma_mask(pdev,DMA_BIT_MASK(64)) != 0) { + if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0 + || pci_set_consistent_dma_mask(pdev,DMA_BIT_MASK(32)) != 0) { return error; + } + } /* Get the bus address of SLI4 device Bar0, Bar1, and Bar2 and the * number of bytes required by each mapping. They are actually diff --git a/drivers/scsi/megaraid/megaraid_sas.c b/drivers/scsi/megaraid/megaraid_sas.c index 134c63ef6d38..99ff99e45bee 100644 --- a/drivers/scsi/megaraid/megaraid_sas.c +++ b/drivers/scsi/megaraid/megaraid_sas.c @@ -2501,7 +2501,9 @@ static int megasas_init_mfi(struct megasas_instance *instance) instance->base_addr = pci_resource_start(instance->pdev, 0); } - if (pci_request_regions(instance->pdev, "megasas: LSI")) { + if (pci_request_selected_regions(instance->pdev, + pci_select_bars(instance->pdev, IORESOURCE_MEM), + "megasas: LSI")) { printk(KERN_DEBUG "megasas: IO memory region busy!\n"); return -EBUSY; } @@ -2642,7 +2644,8 @@ static int megasas_init_mfi(struct megasas_instance *instance) iounmap(instance->reg_set); fail_ioremap: - pci_release_regions(instance->pdev); + pci_release_selected_regions(instance->pdev, + pci_select_bars(instance->pdev, IORESOURCE_MEM)); return -EINVAL; } @@ -2662,7 +2665,8 @@ static void megasas_release_mfi(struct megasas_instance *instance) iounmap(instance->reg_set); - pci_release_regions(instance->pdev); + pci_release_selected_regions(instance->pdev, + pci_select_bars(instance->pdev, IORESOURCE_MEM)); } /** @@ -2971,7 +2975,7 @@ megasas_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) /* * PCI prepping: enable device set bus mastering and dma mask */ - rval = pci_enable_device(pdev); + rval = pci_enable_device_mem(pdev); if (rval) { return rval; @@ -3276,7 +3280,7 @@ megasas_resume(struct pci_dev *pdev) /* * PCI prepping: enable device set bus mastering and dma mask */ - rval = pci_enable_device(pdev); + rval = pci_enable_device_mem(pdev); if (rval) { printk(KERN_ERR "megasas: Enable device failed\n"); diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c index 6422e258fd52..89d02401b9ec 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_base.c +++ b/drivers/scsi/mpt2sas/mpt2sas_base.c @@ -3583,6 +3583,11 @@ mpt2sas_base_attach(struct MPT2SAS_ADAPTER *ioc) ioc->transport_cmds.status = MPT2_CMD_NOT_USED; mutex_init(&ioc->transport_cmds.mutex); + /* scsih internal command bits */ + ioc->scsih_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL); + ioc->scsih_cmds.status = MPT2_CMD_NOT_USED; + mutex_init(&ioc->scsih_cmds.mutex); + /* task management internal command bits */ ioc->tm_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL); ioc->tm_cmds.status = MPT2_CMD_NOT_USED; diff --git a/drivers/scsi/mvsas/mv_init.c b/drivers/scsi/mvsas/mv_init.c index c790d45876c4..cae6b2cf492f 100644 --- a/drivers/scsi/mvsas/mv_init.c +++ b/drivers/scsi/mvsas/mv_init.c @@ -657,6 +657,7 @@ static struct pci_device_id __devinitdata mvs_pci_table[] = { { PCI_VDEVICE(MARVELL, 0x9180), chip_9180 }, { PCI_VDEVICE(ARECA, PCI_DEVICE_ID_ARECA_1300), chip_1300 }, { PCI_VDEVICE(ARECA, PCI_DEVICE_ID_ARECA_1320), chip_1320 }, + { PCI_VDEVICE(ADAPTEC2, 0x0450), chip_6440 }, { } /* terminate list */ }; diff --git a/drivers/scsi/osd/osd_initiator.c b/drivers/scsi/osd/osd_initiator.c index 950202a70bcf..24223473f573 100644 --- a/drivers/scsi/osd/osd_initiator.c +++ b/drivers/scsi/osd/osd_initiator.c @@ -432,30 +432,23 @@ static void _osd_free_seg(struct osd_request *or __unused, seg->alloc_size = 0; } -static void _put_request(struct request *rq , bool is_async) +static void _put_request(struct request *rq) { - if (is_async) { - WARN_ON(rq->bio); - __blk_put_request(rq->q, rq); - } else { - /* - * If osd_finalize_request() was called but the request was not - * executed through the block layer, then we must release BIOs. - * TODO: Keep error code in or->async_error. Need to audit all - * code paths. - */ - if (unlikely(rq->bio)) - blk_end_request(rq, -ENOMEM, blk_rq_bytes(rq)); - else - blk_put_request(rq); - } + /* + * If osd_finalize_request() was called but the request was not + * executed through the block layer, then we must release BIOs. + * TODO: Keep error code in or->async_error. Need to audit all + * code paths. + */ + if (unlikely(rq->bio)) + blk_end_request(rq, -ENOMEM, blk_rq_bytes(rq)); + else + blk_put_request(rq); } void osd_end_request(struct osd_request *or) { struct request *rq = or->request; - /* IMPORTANT: make sure this agrees with osd_execute_request_async */ - bool is_async = (or->request->end_io_data == or); _osd_free_seg(or, &or->set_attr); _osd_free_seg(or, &or->enc_get_attr); @@ -463,20 +456,34 @@ void osd_end_request(struct osd_request *or) if (rq) { if (rq->next_rq) { - _put_request(rq->next_rq, is_async); + _put_request(rq->next_rq); rq->next_rq = NULL; } - _put_request(rq, is_async); + _put_request(rq); } _osd_request_free(or); } EXPORT_SYMBOL(osd_end_request); +static void _set_error_resid(struct osd_request *or, struct request *req, + int error) +{ + or->async_error = error; + or->req_errors = req->errors ? : error; + or->sense_len = req->sense_len; + if (or->out.req) + or->out.residual = or->out.req->resid_len; + if (or->in.req) + or->in.residual = or->in.req->resid_len; +} + int osd_execute_request(struct osd_request *or) { - return or->async_error = - blk_execute_rq(or->request->q, NULL, or->request, 0); + int error = blk_execute_rq(or->request->q, NULL, or->request, 0); + + _set_error_resid(or, or->request, error); + return error; } EXPORT_SYMBOL(osd_execute_request); @@ -484,15 +491,17 @@ static void osd_request_async_done(struct request *req, int error) { struct osd_request *or = req->end_io_data; - or->async_error = error; - - if (unlikely(error)) { - OSD_DEBUG("osd_request_async_done error recieved %d " - "errors 0x%x\n", error, req->errors); - if (!req->errors) /* don't miss out on this one */ - req->errors = error; + _set_error_resid(or, req, error); + if (req->next_rq) { + __blk_put_request(req->q, req->next_rq); + req->next_rq = NULL; } + __blk_put_request(req->q, req); + or->request = NULL; + or->in.req = NULL; + or->out.req = NULL; + if (or->async_done) or->async_done(or, or->async_private); else @@ -1489,21 +1498,18 @@ int osd_req_decode_sense_full(struct osd_request *or, #endif int ret; - if (likely(!or->request->errors)) { - osi->out_resid = 0; - osi->in_resid = 0; + if (likely(!or->req_errors)) return 0; - } osi = osi ? : &local_osi; memset(osi, 0, sizeof(*osi)); - ssdb = or->request->sense; - sense_len = or->request->sense_len; + ssdb = (typeof(ssdb))or->sense; + sense_len = or->sense_len; if ((sense_len < (int)sizeof(*ssdb) || !ssdb->sense_key)) { OSD_ERR("Block-layer returned error(0x%x) but " "sense_len(%u) || key(%d) is empty\n", - or->request->errors, sense_len, ssdb->sense_key); + or->req_errors, sense_len, ssdb->sense_key); goto analyze; } @@ -1525,7 +1531,7 @@ int osd_req_decode_sense_full(struct osd_request *or, "additional_code=0x%x async_error=%d errors=0x%x\n", osi->key, original_sense_len, sense_len, osi->additional_code, or->async_error, - or->request->errors); + or->req_errors); if (original_sense_len < sense_len) sense_len = original_sense_len; @@ -1695,10 +1701,10 @@ analyze: ret = -EIO; } - if (or->out.req) - osi->out_resid = or->out.req->resid_len ?: or->out.total_bytes; - if (or->in.req) - osi->in_resid = or->in.req->resid_len ?: or->in.total_bytes; + if (!or->out.residual) + or->out.residual = or->out.total_bytes; + if (!or->in.residual) + or->in.residual = or->in.total_bytes; return ret; } diff --git a/drivers/scsi/pm8001/pm8001_ctl.h b/drivers/scsi/pm8001/pm8001_ctl.h index 22644de26399..63ad4aa0c422 100644 --- a/drivers/scsi/pm8001/pm8001_ctl.h +++ b/drivers/scsi/pm8001/pm8001_ctl.h @@ -45,16 +45,6 @@ #define HEADER_LEN 28 #define SIZE_OFFSET 16 -struct pm8001_ioctl_payload { - u32 signature; - u16 major_function; - u16 minor_function; - u16 length; - u16 status; - u16 offset; - u16 id; - u8 func_specific[1]; -}; #define FLASH_OK 0x000000 #define FAIL_OPEN_BIOS_FILE 0x000100 diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c index a3de306b9045..9b44c6f1b10e 100644 --- a/drivers/scsi/pm8001/pm8001_hwi.c +++ b/drivers/scsi/pm8001/pm8001_hwi.c @@ -373,10 +373,7 @@ static int bar4_shift(struct pm8001_hba_info *pm8001_ha, u32 shiftValue) static void __devinit mpi_set_phys_g3_with_ssc(struct pm8001_hba_info *pm8001_ha, u32 SSCbit) { - u32 offset; - u32 value; - u32 i, j; - u32 bit_cnt; + u32 value, offset, i; #define SAS2_SETTINGS_LOCAL_PHY_0_3_SHIFT_ADDR 0x00030000 #define SAS2_SETTINGS_LOCAL_PHY_4_7_SHIFT_ADDR 0x00040000 @@ -392,55 +389,35 @@ mpi_set_phys_g3_with_ssc(struct pm8001_hba_info *pm8001_ha, u32 SSCbit) */ if (-1 == bar4_shift(pm8001_ha, SAS2_SETTINGS_LOCAL_PHY_0_3_SHIFT_ADDR)) return; - /* set SSC bit of PHY 0 - 3 */ + for (i = 0; i < 4; i++) { offset = SAS2_SETTINGS_LOCAL_PHY_0_3_OFFSET + 0x4000 * i; - value = pm8001_cr32(pm8001_ha, 2, offset); - if (SSCbit) { - value |= 0x00000001 << PHY_G3_WITH_SSC_BIT_SHIFT; - value &= ~(0x00000001 << PHY_G3_WITHOUT_SSC_BIT_SHIFT); - } else { - value |= 0x00000001 << PHY_G3_WITHOUT_SSC_BIT_SHIFT; - value &= ~(0x00000001 << PHY_G3_WITH_SSC_BIT_SHIFT); - } - bit_cnt = 0; - for (j = 0; j < 31; j++) - if ((value >> j) & 0x00000001) - bit_cnt++; - if (bit_cnt % 2) - value &= ~(0x00000001 << SNW3_PHY_CAPABILITIES_PARITY); - else - value |= 0x00000001 << SNW3_PHY_CAPABILITIES_PARITY; - - pm8001_cw32(pm8001_ha, 2, offset, value); + pm8001_cw32(pm8001_ha, 2, offset, 0x80001501); } - /* shift membase 3 for SAS2_SETTINGS_LOCAL_PHY 4 - 7 */ if (-1 == bar4_shift(pm8001_ha, SAS2_SETTINGS_LOCAL_PHY_4_7_SHIFT_ADDR)) return; - - /* set SSC bit of PHY 4 - 7 */ for (i = 4; i < 8; i++) { offset = SAS2_SETTINGS_LOCAL_PHY_4_7_OFFSET + 0x4000 * (i-4); - value = pm8001_cr32(pm8001_ha, 2, offset); - if (SSCbit) { - value |= 0x00000001 << PHY_G3_WITH_SSC_BIT_SHIFT; - value &= ~(0x00000001 << PHY_G3_WITHOUT_SSC_BIT_SHIFT); - } else { - value |= 0x00000001 << PHY_G3_WITHOUT_SSC_BIT_SHIFT; - value &= ~(0x00000001 << PHY_G3_WITH_SSC_BIT_SHIFT); - } - bit_cnt = 0; - for (j = 0; j < 31; j++) - if ((value >> j) & 0x00000001) - bit_cnt++; - if (bit_cnt % 2) - value &= ~(0x00000001 << SNW3_PHY_CAPABILITIES_PARITY); - else - value |= 0x00000001 << SNW3_PHY_CAPABILITIES_PARITY; - - pm8001_cw32(pm8001_ha, 2, offset, value); + pm8001_cw32(pm8001_ha, 2, offset, 0x80001501); } + /************************************************************* + Change the SSC upspreading value to 0x0 so that upspreading is disabled. + Device MABC SMOD0 Controls + Address: (via MEMBASE-III): + Using shifted destination address 0x0_0000: with Offset 0xD8 + + 31:28 R/W Reserved Do not change + 27:24 R/W SAS_SMOD_SPRDUP 0000 + 23:20 R/W SAS_SMOD_SPRDDN 0000 + 19:0 R/W Reserved Do not change + Upon power-up this register will read as 0x8990c016, + and I would like you to change the SAS_SMOD_SPRDUP bits to 0b0000 + so that the written value will be 0x8090c016. + This will ensure only down-spreading SSC is enabled on the SPC. + *************************************************************/ + value = pm8001_cr32(pm8001_ha, 2, 0xd8); + pm8001_cw32(pm8001_ha, 2, 0xd8, 0x8000C016); /*set the shifted destination address to 0x0 to avoid error operation */ bar4_shift(pm8001_ha, 0x0); @@ -1901,7 +1878,7 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb) { struct sas_task *t; struct pm8001_ccb_info *ccb; - unsigned long flags; + unsigned long flags = 0; u32 param; u32 status; u32 tag; @@ -2040,7 +2017,9 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb) ts->stat = SAS_QUEUE_FULL; pm8001_ccb_task_free(pm8001_ha, t, ccb, tag); mb();/*in order to force CPU ordering*/ + spin_unlock_irqrestore(&pm8001_ha->lock, flags); t->task_done(t); + spin_lock_irqsave(&pm8001_ha->lock, flags); return; } break; @@ -2058,7 +2037,9 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb) ts->stat = SAS_QUEUE_FULL; pm8001_ccb_task_free(pm8001_ha, t, ccb, tag); mb();/*ditto*/ + spin_unlock_irqrestore(&pm8001_ha->lock, flags); t->task_done(t); + spin_lock_irqsave(&pm8001_ha->lock, flags); return; } break; @@ -2084,7 +2065,9 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb) ts->stat = SAS_QUEUE_FULL; pm8001_ccb_task_free(pm8001_ha, t, ccb, tag); mb();/* ditto*/ + spin_unlock_irqrestore(&pm8001_ha->lock, flags); t->task_done(t); + spin_lock_irqsave(&pm8001_ha->lock, flags); return; } break; @@ -2149,7 +2132,9 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb) ts->stat = SAS_QUEUE_FULL; pm8001_ccb_task_free(pm8001_ha, t, ccb, tag); mb();/*ditto*/ + spin_unlock_irqrestore(&pm8001_ha->lock, flags); t->task_done(t); + spin_lock_irqsave(&pm8001_ha->lock, flags); return; } break; @@ -2171,7 +2156,9 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb) ts->stat = SAS_QUEUE_FULL; pm8001_ccb_task_free(pm8001_ha, t, ccb, tag); mb();/*ditto*/ + spin_unlock_irqrestore(&pm8001_ha->lock, flags); t->task_done(t); + spin_lock_irqsave(&pm8001_ha->lock, flags); return; } break; @@ -2200,11 +2187,20 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb) " resp 0x%x stat 0x%x but aborted by upper layer!\n", t, status, ts->resp, ts->stat)); pm8001_ccb_task_free(pm8001_ha, t, ccb, tag); - } else { + } else if (t->uldd_task) { spin_unlock_irqrestore(&t->task_state_lock, flags); pm8001_ccb_task_free(pm8001_ha, t, ccb, tag); mb();/* ditto */ + spin_unlock_irqrestore(&pm8001_ha->lock, flags); t->task_done(t); + spin_lock_irqsave(&pm8001_ha->lock, flags); + } else if (!t->uldd_task) { + spin_unlock_irqrestore(&t->task_state_lock, flags); + pm8001_ccb_task_free(pm8001_ha, t, ccb, tag); + mb();/*ditto*/ + spin_unlock_irqrestore(&pm8001_ha->lock, flags); + t->task_done(t); + spin_lock_irqsave(&pm8001_ha->lock, flags); } } @@ -2212,7 +2208,7 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb) static void mpi_sata_event(struct pm8001_hba_info *pm8001_ha , void *piomb) { struct sas_task *t; - unsigned long flags; + unsigned long flags = 0; struct task_status_struct *ts; struct pm8001_ccb_info *ccb; struct pm8001_device *pm8001_dev; @@ -2292,7 +2288,9 @@ static void mpi_sata_event(struct pm8001_hba_info *pm8001_ha , void *piomb) ts->stat = SAS_QUEUE_FULL; pm8001_ccb_task_free(pm8001_ha, t, ccb, tag); mb();/*ditto*/ + spin_unlock_irqrestore(&pm8001_ha->lock, flags); t->task_done(t); + spin_lock_irqsave(&pm8001_ha->lock, flags); return; } break; @@ -2401,11 +2399,20 @@ static void mpi_sata_event(struct pm8001_hba_info *pm8001_ha , void *piomb) " resp 0x%x stat 0x%x but aborted by upper layer!\n", t, event, ts->resp, ts->stat)); pm8001_ccb_task_free(pm8001_ha, t, ccb, tag); - } else { + } else if (t->uldd_task) { spin_unlock_irqrestore(&t->task_state_lock, flags); pm8001_ccb_task_free(pm8001_ha, t, ccb, tag); - mb();/* in order to force CPU ordering */ + mb();/* ditto */ + spin_unlock_irqrestore(&pm8001_ha->lock, flags); t->task_done(t); + spin_lock_irqsave(&pm8001_ha->lock, flags); + } else if (!t->uldd_task) { + spin_unlock_irqrestore(&t->task_state_lock, flags); + pm8001_ccb_task_free(pm8001_ha, t, ccb, tag); + mb();/*ditto*/ + spin_unlock_irqrestore(&pm8001_ha->lock, flags); + t->task_done(t); + spin_lock_irqsave(&pm8001_ha->lock, flags); } } @@ -2876,15 +2883,20 @@ hw_event_sas_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb) le32_to_cpu(pPayload->lr_evt_status_phyid_portid); u8 link_rate = (u8)((lr_evt_status_phyid_portid & 0xF0000000) >> 28); + u8 port_id = (u8)(lr_evt_status_phyid_portid & 0x0000000F); u8 phy_id = (u8)((lr_evt_status_phyid_portid & 0x000000F0) >> 4); + u32 npip_portstate = le32_to_cpu(pPayload->npip_portstate); + u8 portstate = (u8)(npip_portstate & 0x0000000F); + struct pm8001_port *port = &pm8001_ha->port[port_id]; struct sas_ha_struct *sas_ha = pm8001_ha->sas; struct pm8001_phy *phy = &pm8001_ha->phy[phy_id]; unsigned long flags; u8 deviceType = pPayload->sas_identify.dev_type; - + port->port_state = portstate; PM8001_MSG_DBG(pm8001_ha, - pm8001_printk("HW_EVENT_SAS_PHY_UP \n")); + pm8001_printk("HW_EVENT_SAS_PHY_UP port id = %d, phy id = %d\n", + port_id, phy_id)); switch (deviceType) { case SAS_PHY_UNUSED: @@ -2895,16 +2907,19 @@ hw_event_sas_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb) PM8001_MSG_DBG(pm8001_ha, pm8001_printk("end device.\n")); pm8001_chip_phy_ctl_req(pm8001_ha, phy_id, PHY_NOTIFY_ENABLE_SPINUP); + port->port_attached = 1; get_lrate_mode(phy, link_rate); break; case SAS_EDGE_EXPANDER_DEVICE: PM8001_MSG_DBG(pm8001_ha, pm8001_printk("expander device.\n")); + port->port_attached = 1; get_lrate_mode(phy, link_rate); break; case SAS_FANOUT_EXPANDER_DEVICE: PM8001_MSG_DBG(pm8001_ha, pm8001_printk("fanout expander device.\n")); + port->port_attached = 1; get_lrate_mode(phy, link_rate); break; default: @@ -2946,11 +2961,20 @@ hw_event_sata_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb) le32_to_cpu(pPayload->lr_evt_status_phyid_portid); u8 link_rate = (u8)((lr_evt_status_phyid_portid & 0xF0000000) >> 28); + u8 port_id = (u8)(lr_evt_status_phyid_portid & 0x0000000F); u8 phy_id = (u8)((lr_evt_status_phyid_portid & 0x000000F0) >> 4); + u32 npip_portstate = le32_to_cpu(pPayload->npip_portstate); + u8 portstate = (u8)(npip_portstate & 0x0000000F); + struct pm8001_port *port = &pm8001_ha->port[port_id]; struct sas_ha_struct *sas_ha = pm8001_ha->sas; struct pm8001_phy *phy = &pm8001_ha->phy[phy_id]; unsigned long flags; + PM8001_MSG_DBG(pm8001_ha, + pm8001_printk("HW_EVENT_SATA_PHY_UP port id = %d," + " phy id = %d\n", port_id, phy_id)); + port->port_state = portstate; + port->port_attached = 1; get_lrate_mode(phy, link_rate); phy->phy_type |= PORT_TYPE_SATA; phy->phy_attached = 1; @@ -2984,7 +3008,13 @@ hw_event_phy_down(struct pm8001_hba_info *pm8001_ha, void *piomb) (u8)((lr_evt_status_phyid_portid & 0x000000F0) >> 4); u32 npip_portstate = le32_to_cpu(pPayload->npip_portstate); u8 portstate = (u8)(npip_portstate & 0x0000000F); - + struct pm8001_port *port = &pm8001_ha->port[port_id]; + struct pm8001_phy *phy = &pm8001_ha->phy[phy_id]; + port->port_state = portstate; + phy->phy_type = 0; + phy->identify.device_type = 0; + phy->phy_attached = 0; + memset(&phy->dev_sas_addr, 0, SAS_ADDR_SIZE); switch (portstate) { case PORT_VALID: break; @@ -2993,26 +3023,30 @@ hw_event_phy_down(struct pm8001_hba_info *pm8001_ha, void *piomb) pm8001_printk(" PortInvalid portID %d \n", port_id)); PM8001_MSG_DBG(pm8001_ha, pm8001_printk(" Last phy Down and port invalid\n")); + port->port_attached = 0; pm8001_hw_event_ack_req(pm8001_ha, 0, HW_EVENT_PHY_DOWN, port_id, phy_id, 0, 0); break; case PORT_IN_RESET: PM8001_MSG_DBG(pm8001_ha, - pm8001_printk(" PortInReset portID %d \n", port_id)); + pm8001_printk(" Port In Reset portID %d \n", port_id)); break; case PORT_NOT_ESTABLISHED: PM8001_MSG_DBG(pm8001_ha, pm8001_printk(" phy Down and PORT_NOT_ESTABLISHED\n")); + port->port_attached = 0; break; case PORT_LOSTCOMM: PM8001_MSG_DBG(pm8001_ha, pm8001_printk(" phy Down and PORT_LOSTCOMM\n")); PM8001_MSG_DBG(pm8001_ha, pm8001_printk(" Last phy Down and port invalid\n")); + port->port_attached = 0; pm8001_hw_event_ack_req(pm8001_ha, 0, HW_EVENT_PHY_DOWN, port_id, phy_id, 0, 0); break; default: + port->port_attached = 0; PM8001_MSG_DBG(pm8001_ha, pm8001_printk(" phy Down and(default) = %x\n", portstate)); @@ -3770,7 +3804,8 @@ static int pm8001_chip_ssp_io_req(struct pm8001_hba_info *pm8001_ha, u32 opc = OPC_INB_SSPINIIOSTART; memset(&ssp_cmd, 0, sizeof(ssp_cmd)); memcpy(ssp_cmd.ssp_iu.lun, task->ssp_task.LUN, 8); - ssp_cmd.dir_m_tlr = data_dir_flags[task->data_dir] << 8 | 0x0;/*0 for + ssp_cmd.dir_m_tlr = + cpu_to_le32(data_dir_flags[task->data_dir] << 8 | 0x0);/*0 for SAS 1.1 compatible TLR*/ ssp_cmd.data_len = cpu_to_le32(task->total_xfer_len); ssp_cmd.device_id = cpu_to_le32(pm8001_dev->device_id); @@ -3841,7 +3876,7 @@ static int pm8001_chip_sata_req(struct pm8001_hba_info *pm8001_ha, } } if (task->ata_task.use_ncq && pm8001_get_ncq_tag(task, &hdr_tag)) - ncg_tag = cpu_to_le32(hdr_tag); + ncg_tag = hdr_tag; dir = data_dir_flags[task->data_dir] << 8; sata_cmd.tag = cpu_to_le32(tag); sata_cmd.device_id = cpu_to_le32(pm8001_ha_dev->device_id); @@ -3986,7 +4021,7 @@ static int pm8001_chip_reg_dev_req(struct pm8001_hba_info *pm8001_ha, ((stp_sspsmp_sata & 0x03) * 0x10000000)); payload.firstburstsize_ITNexustimeout = cpu_to_le32(ITNT | (firstBurstSize * 0x10000)); - memcpy(&payload.sas_addr_hi, pm8001_dev->sas_device->sas_addr, + memcpy(payload.sas_addr, pm8001_dev->sas_device->sas_addr, SAS_ADDR_SIZE); rc = mpi_build_cmd(pm8001_ha, circularQ, opc, &payload); return rc; @@ -4027,7 +4062,7 @@ static int pm8001_chip_phy_ctl_req(struct pm8001_hba_info *pm8001_ha, struct inbound_queue_table *circularQ; int ret; u32 opc = OPC_INB_LOCAL_PHY_CONTROL; - memset((u8 *)&payload, 0, sizeof(payload)); + memset(&payload, 0, sizeof(payload)); circularQ = &pm8001_ha->inbnd_q_tbl[0]; payload.tag = 1; payload.phyop_phyid = diff --git a/drivers/scsi/pm8001/pm8001_hwi.h b/drivers/scsi/pm8001/pm8001_hwi.h index 96e4daa68b8f..833a5201eda4 100644 --- a/drivers/scsi/pm8001/pm8001_hwi.h +++ b/drivers/scsi/pm8001/pm8001_hwi.h @@ -242,8 +242,7 @@ struct reg_dev_req { __le32 phyid_portid; __le32 dtype_dlr_retry; __le32 firstburstsize_ITNexustimeout; - u32 sas_addr_hi; - u32 sas_addr_low; + u8 sas_addr[SAS_ADDR_SIZE]; __le32 upper_device_id; u32 reserved[8]; } __attribute__((packed, aligned(4))); diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c index 42ebe725d5a5..c2f1032496cb 100644 --- a/drivers/scsi/pm8001/pm8001_init.c +++ b/drivers/scsi/pm8001/pm8001_init.c @@ -200,8 +200,13 @@ static int __devinit pm8001_alloc(struct pm8001_hba_info *pm8001_ha) { int i; spin_lock_init(&pm8001_ha->lock); - for (i = 0; i < pm8001_ha->chip->n_phy; i++) + for (i = 0; i < pm8001_ha->chip->n_phy; i++) { pm8001_phy_init(pm8001_ha, i); + pm8001_ha->port[i].wide_port_phymap = 0; + pm8001_ha->port[i].port_attached = 0; + pm8001_ha->port[i].port_state = 0; + INIT_LIST_HEAD(&pm8001_ha->port[i].list); + } pm8001_ha->tags = kzalloc(PM8001_MAX_CCB, GFP_KERNEL); if (!pm8001_ha->tags) @@ -511,19 +516,23 @@ static void pm8001_init_sas_add(struct pm8001_hba_info *pm8001_ha) u8 i; #ifdef PM8001_READ_VPD DECLARE_COMPLETION_ONSTACK(completion); + struct pm8001_ioctl_payload payload; pm8001_ha->nvmd_completion = &completion; - PM8001_CHIP_DISP->get_nvmd_req(pm8001_ha, 0, 0); + payload.minor_function = 0; + payload.length = 128; + payload.func_specific = kzalloc(128, GFP_KERNEL); + PM8001_CHIP_DISP->get_nvmd_req(pm8001_ha, &payload); wait_for_completion(&completion); for (i = 0; i < pm8001_ha->chip->n_phy; i++) { memcpy(&pm8001_ha->phy[i].dev_sas_addr, pm8001_ha->sas_addr, SAS_ADDR_SIZE); PM8001_INIT_DBG(pm8001_ha, - pm8001_printk("phy %d sas_addr = %x \n", i, - (u64)pm8001_ha->phy[i].dev_sas_addr)); + pm8001_printk("phy %d sas_addr = %016llx \n", i, + pm8001_ha->phy[i].dev_sas_addr)); } #else for (i = 0; i < pm8001_ha->chip->n_phy; i++) { - pm8001_ha->phy[i].dev_sas_addr = 0x500e004010000004ULL; + pm8001_ha->phy[i].dev_sas_addr = 0x50010c600047f9d0ULL; pm8001_ha->phy[i].dev_sas_addr = cpu_to_be64((u64) (*(u64 *)&pm8001_ha->phy[i].dev_sas_addr)); diff --git a/drivers/scsi/pm8001/pm8001_sas.c b/drivers/scsi/pm8001/pm8001_sas.c index 1f767a0e727a..7f9c83a76390 100644 --- a/drivers/scsi/pm8001/pm8001_sas.c +++ b/drivers/scsi/pm8001/pm8001_sas.c @@ -329,6 +329,23 @@ int pm8001_slave_configure(struct scsi_device *sdev) } return 0; } + /* Find the local port id that's attached to this device */ +static int sas_find_local_port_id(struct domain_device *dev) +{ + struct domain_device *pdev = dev->parent; + + /* Directly attached device */ + if (!pdev) + return dev->port->id; + while (pdev) { + struct domain_device *pdev_p = pdev->parent; + if (!pdev_p) + return pdev->port->id; + pdev = pdev->parent; + } + return 0; +} + /** * pm8001_task_exec - queue the task(ssp, smp && ata) to the hardware. * @task: the task to be execute. @@ -346,11 +363,12 @@ static int pm8001_task_exec(struct sas_task *task, const int num, struct domain_device *dev = task->dev; struct pm8001_hba_info *pm8001_ha; struct pm8001_device *pm8001_dev; + struct pm8001_port *port = NULL; struct sas_task *t = task; struct pm8001_ccb_info *ccb; u32 tag = 0xdeadbeef, rc, n_elem = 0; u32 n = num; - unsigned long flags = 0; + unsigned long flags = 0, flags_libsas = 0; if (!dev->port) { struct task_status_struct *tsm = &t->task_status; @@ -379,6 +397,35 @@ static int pm8001_task_exec(struct sas_task *task, const int num, rc = SAS_PHY_DOWN; goto out_done; } + port = &pm8001_ha->port[sas_find_local_port_id(dev)]; + if (!port->port_attached) { + if (sas_protocol_ata(t->task_proto)) { + struct task_status_struct *ts = &t->task_status; + ts->resp = SAS_TASK_UNDELIVERED; + ts->stat = SAS_PHY_DOWN; + + spin_unlock_irqrestore(&pm8001_ha->lock, flags); + spin_unlock_irqrestore(dev->sata_dev.ap->lock, + flags_libsas); + t->task_done(t); + spin_lock_irqsave(dev->sata_dev.ap->lock, + flags_libsas); + spin_lock_irqsave(&pm8001_ha->lock, flags); + if (n > 1) + t = list_entry(t->list.next, + struct sas_task, list); + continue; + } else { + struct task_status_struct *ts = &t->task_status; + ts->resp = SAS_TASK_UNDELIVERED; + ts->stat = SAS_PHY_DOWN; + t->task_done(t); + if (n > 1) + t = list_entry(t->list.next, + struct sas_task, list); + continue; + } + } rc = pm8001_tag_alloc(pm8001_ha, &tag); if (rc) goto err_out; @@ -569,11 +616,11 @@ static int pm8001_dev_found_notify(struct domain_device *dev) spin_lock_irqsave(&pm8001_ha->lock, flags); pm8001_device = pm8001_alloc_dev(pm8001_ha); - pm8001_device->sas_device = dev; if (!pm8001_device) { res = -1; goto found_out; } + pm8001_device->sas_device = dev; dev->lldd_dev = pm8001_device; pm8001_device->dev_type = dev->dev_type; pm8001_device->dcompletion = &completion; @@ -609,7 +656,7 @@ static int pm8001_dev_found_notify(struct domain_device *dev) wait_for_completion(&completion); if (dev->dev_type == SAS_END_DEV) msleep(50); - pm8001_ha->flags = PM8001F_RUN_TIME ; + pm8001_ha->flags |= PM8001F_RUN_TIME ; return 0; found_out: spin_unlock_irqrestore(&pm8001_ha->lock, flags); @@ -772,7 +819,7 @@ pm8001_exec_internal_task_abort(struct pm8001_hba_info *pm8001_ha, task->task_done = pm8001_task_done; task->timer.data = (unsigned long)task; task->timer.function = pm8001_tmf_timedout; - task->timer.expires = jiffies + PM8001_TASK_TIMEOUT*HZ; + task->timer.expires = jiffies + PM8001_TASK_TIMEOUT * HZ; add_timer(&task->timer); res = pm8001_tag_alloc(pm8001_ha, &ccb_tag); @@ -897,6 +944,8 @@ int pm8001_I_T_nexus_reset(struct domain_device *dev) if (dev_is_sata(dev)) { DECLARE_COMPLETION_ONSTACK(completion_setstate); + if (scsi_is_sas_phy_local(phy)) + return 0; rc = sas_phy_reset(phy, 1); msleep(2000); rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev , diff --git a/drivers/scsi/pm8001/pm8001_sas.h b/drivers/scsi/pm8001/pm8001_sas.h index 30f2ede55a75..8e38ca8cd101 100644 --- a/drivers/scsi/pm8001/pm8001_sas.h +++ b/drivers/scsi/pm8001/pm8001_sas.h @@ -59,11 +59,11 @@ #define DRV_NAME "pm8001" #define DRV_VERSION "0.1.36" -#define PM8001_FAIL_LOGGING 0x01 /* libsas EH function logging */ +#define PM8001_FAIL_LOGGING 0x01 /* Error message logging */ #define PM8001_INIT_LOGGING 0x02 /* driver init logging */ #define PM8001_DISC_LOGGING 0x04 /* discovery layer logging */ #define PM8001_IO_LOGGING 0x08 /* I/O path logging */ -#define PM8001_EH_LOGGING 0x10 /* Error message logging */ +#define PM8001_EH_LOGGING 0x10 /* libsas EH function logging*/ #define PM8001_IOCTL_LOGGING 0x20 /* IOCTL message logging */ #define PM8001_MSG_LOGGING 0x40 /* misc message logging */ #define pm8001_printk(format, arg...) printk(KERN_INFO "%s %d:" format,\ @@ -100,6 +100,7 @@ do { \ #define PM8001_USE_TASKLET #define PM8001_USE_MSIX +#define PM8001_READ_VPD #define DEV_IS_EXPANDER(type) ((type == EDGE_DEV) || (type == FANOUT_DEV)) @@ -111,7 +112,22 @@ extern const struct pm8001_dispatch pm8001_8001_dispatch; struct pm8001_hba_info; struct pm8001_ccb_info; struct pm8001_device; -struct pm8001_tmf_task; +/* define task management IU */ +struct pm8001_tmf_task { + u8 tmf; + u32 tag_of_task_to_be_managed; +}; +struct pm8001_ioctl_payload { + u32 signature; + u16 major_function; + u16 minor_function; + u16 length; + u16 status; + u16 offset; + u16 id; + u8 *func_specific; +}; + struct pm8001_dispatch { char *name; int (*chip_init)(struct pm8001_hba_info *pm8001_ha); @@ -164,6 +180,10 @@ struct pm8001_chip_info { struct pm8001_port { struct asd_sas_port sas_port; + u8 port_attached; + u8 wide_port_phymap; + u8 port_state; + struct list_head list; }; struct pm8001_phy { @@ -386,11 +406,7 @@ struct pm8001_fw_image_header { __be32 startup_entry; } __attribute__((packed, aligned(4))); -/* define task management IU */ -struct pm8001_tmf_task { - u8 tmf; - u32 tag_of_task_to_be_managed; -}; + /** * FW Flash Update status values */ diff --git a/drivers/scsi/pmcraid.c b/drivers/scsi/pmcraid.c index 34c6b896a91b..e7d2688fbeba 100644 --- a/drivers/scsi/pmcraid.c +++ b/drivers/scsi/pmcraid.c @@ -1,7 +1,8 @@ /* * pmcraid.c -- driver for PMC Sierra MaxRAID controller adapters * - * Written By: PMC Sierra Corporation + * Written By: Anil Ravindranath<anil_ravindranath@pmc-sierra.com> + * PMC-Sierra Inc * * Copyright (C) 2008, 2009 PMC Sierra Inc * @@ -79,7 +80,7 @@ DECLARE_BITMAP(pmcraid_minor, PMCRAID_MAX_ADAPTERS); /* * Module parameters */ -MODULE_AUTHOR("PMC Sierra Corporation, anil_ravindranath@pmc-sierra.com"); +MODULE_AUTHOR("Anil Ravindranath<anil_ravindranath@pmc-sierra.com>"); MODULE_DESCRIPTION("PMC Sierra MaxRAID Controller Driver"); MODULE_LICENSE("GPL"); MODULE_VERSION(PMCRAID_DRIVER_VERSION); @@ -162,10 +163,10 @@ static int pmcraid_slave_alloc(struct scsi_device *scsi_dev) spin_lock_irqsave(&pinstance->resource_lock, lock_flags); list_for_each_entry(temp, &pinstance->used_res_q, queue) { - /* do not expose VSETs with order-ids >= 240 */ + /* do not expose VSETs with order-ids > MAX_VSET_TARGETS */ if (RES_IS_VSET(temp->cfg_entry)) { target = temp->cfg_entry.unique_flags1; - if (target >= PMCRAID_MAX_VSET_TARGETS) + if (target > PMCRAID_MAX_VSET_TARGETS) continue; bus = PMCRAID_VSET_BUS_ID; lun = 0; @@ -1210,7 +1211,7 @@ static int pmcraid_expose_resource(struct pmcraid_config_table_entry *cfgte) int retval = 0; if (cfgte->resource_type == RES_TYPE_VSET) - retval = ((cfgte->unique_flags1 & 0xFF) < 0xFE); + retval = ((cfgte->unique_flags1 & 0x80) == 0); else if (cfgte->resource_type == RES_TYPE_GSCSI) retval = (RES_BUS(cfgte->resource_address) != PMCRAID_VIRTUAL_ENCL_BUS_ID); @@ -1361,6 +1362,7 @@ static int pmcraid_notify_aen(struct pmcraid_instance *pinstance, u8 type) * Return value: * none */ + static void pmcraid_handle_config_change(struct pmcraid_instance *pinstance) { struct pmcraid_config_table_entry *cfg_entry; @@ -1368,9 +1370,10 @@ static void pmcraid_handle_config_change(struct pmcraid_instance *pinstance) struct pmcraid_cmd *cmd; struct pmcraid_cmd *cfgcmd; struct pmcraid_resource_entry *res = NULL; - u32 new_entry = 1; unsigned long lock_flags; unsigned long host_lock_flags; + u32 new_entry = 1; + u32 hidden_entry = 0; int rc; ccn_hcam = (struct pmcraid_hcam_ccn *)pinstance->ccn.hcam; @@ -1406,9 +1409,15 @@ static void pmcraid_handle_config_change(struct pmcraid_instance *pinstance) } /* If this resource is not going to be added to mid-layer, just notify - * applications and return + * applications and return. If this notification is about hiding a VSET + * resource, check if it was exposed already. */ - if (!pmcraid_expose_resource(cfg_entry)) + if (pinstance->ccn.hcam->notification_type == + NOTIFICATION_TYPE_ENTRY_CHANGED && + cfg_entry->resource_type == RES_TYPE_VSET && + cfg_entry->unique_flags1 & 0x80) { + hidden_entry = 1; + } else if (!pmcraid_expose_resource(cfg_entry)) goto out_notify_apps; spin_lock_irqsave(&pinstance->resource_lock, lock_flags); @@ -1424,6 +1433,12 @@ static void pmcraid_handle_config_change(struct pmcraid_instance *pinstance) if (new_entry) { + if (hidden_entry) { + spin_unlock_irqrestore(&pinstance->resource_lock, + lock_flags); + goto out_notify_apps; + } + /* If there are more number of resources than what driver can * manage, do not notify the applications about the CCN. Just * ignore this notifications and re-register the same HCAM @@ -1454,8 +1469,9 @@ static void pmcraid_handle_config_change(struct pmcraid_instance *pinstance) sizeof(struct pmcraid_config_table_entry)); if (pinstance->ccn.hcam->notification_type == - NOTIFICATION_TYPE_ENTRY_DELETED) { + NOTIFICATION_TYPE_ENTRY_DELETED || hidden_entry) { if (res->scsi_dev) { + res->cfg_entry.unique_flags1 &= 0x7F; res->change_detected = RES_CHANGE_DEL; res->cfg_entry.resource_handle = PMCRAID_INVALID_RES_HANDLE; diff --git a/drivers/scsi/pmcraid.h b/drivers/scsi/pmcraid.h index 2752b56cad56..92f89d50850c 100644 --- a/drivers/scsi/pmcraid.h +++ b/drivers/scsi/pmcraid.h @@ -1,6 +1,9 @@ /* * pmcraid.h -- PMC Sierra MaxRAID controller driver header file * + * Written By: Anil Ravindranath<anil_ravindranath@pmc-sierra.com> + * PMC-Sierra Inc + * * Copyright (C) 2008, 2009 PMC Sierra Inc. * * This program is free software; you can redistribute it and/or modify @@ -106,7 +109,7 @@ #define PMCRAID_VSET_LUN_ID 0x0 #define PMCRAID_PHYS_BUS_ID 0x0 #define PMCRAID_VIRTUAL_ENCL_BUS_ID 0x8 -#define PMCRAID_MAX_VSET_TARGETS 240 +#define PMCRAID_MAX_VSET_TARGETS 0x7F #define PMCRAID_MAX_VSET_LUNS_PER_TARGET 8 #define PMCRAID_IOA_MAX_SECTORS 32767 diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h index 6b9bf23c7735..384afda7dbe9 100644 --- a/drivers/scsi/qla2xxx/qla_def.h +++ b/drivers/scsi/qla2xxx/qla_def.h @@ -1570,9 +1570,6 @@ typedef struct fc_port { struct fc_rport *rport, *drport; u32 supported_classes; - unsigned long last_queue_full; - unsigned long last_ramp_up; - uint16_t vp_idx; } fc_port_t; @@ -2265,6 +2262,7 @@ struct qla_hw_data { uint32_t port0 :1; uint32_t running_gold_fw :1; uint32_t cpu_affinity_enabled :1; + uint32_t disable_msix_handshake :1; } flags; /* This spinlock is used to protect "io transactions", you must @@ -2387,6 +2385,7 @@ struct qla_hw_data { #define IS_QLA81XX(ha) (IS_QLA8001(ha)) #define IS_QLA2XXX_MIDTYPE(ha) (IS_QLA24XX(ha) || IS_QLA84XX(ha) || \ IS_QLA25XX(ha) || IS_QLA81XX(ha)) +#define IS_MSIX_NACK_CAPABLE(ha) (IS_QLA81XX(ha)) #define IS_NOPOLLING_TYPE(ha) ((IS_QLA25XX(ha) || IS_QLA81XX(ha)) && \ (ha)->flags.msix_enabled) #define IS_FAC_REQUIRED(ha) (IS_QLA81XX(ha)) diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h index e21851358509..0b6801fc6389 100644 --- a/drivers/scsi/qla2xxx/qla_gbl.h +++ b/drivers/scsi/qla2xxx/qla_gbl.h @@ -72,8 +72,6 @@ extern int ql2xloginretrycount; extern int ql2xfdmienable; extern int ql2xallocfwdump; extern int ql2xextended_error_logging; -extern int ql2xqfullrampup; -extern int ql2xqfulltracking; extern int ql2xiidmaenable; extern int ql2xmaxqueues; extern int ql2xmultique_tag; diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index b74924b279ef..73a793539d45 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -1442,7 +1442,17 @@ qla24xx_config_rings(struct scsi_qla_host *vha) icb->firmware_options_2 |= __constant_cpu_to_le32(BIT_18); - icb->firmware_options_2 &= __constant_cpu_to_le32(~BIT_22); + /* Use Disable MSIX Handshake mode for capable adapters */ + if (IS_MSIX_NACK_CAPABLE(ha)) { + icb->firmware_options_2 &= + __constant_cpu_to_le32(~BIT_22); + ha->flags.disable_msix_handshake = 1; + qla_printk(KERN_INFO, ha, + "MSIX Handshake Disable Mode turned on\n"); + } else { + icb->firmware_options_2 |= + __constant_cpu_to_le32(BIT_22); + } icb->firmware_options_2 |= __constant_cpu_to_le32(BIT_23); WRT_REG_DWORD(®->isp25mq.req_q_in, 0); diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c index 804987397b77..1692a883f4de 100644 --- a/drivers/scsi/qla2xxx/qla_isr.c +++ b/drivers/scsi/qla2xxx/qla_isr.c @@ -811,78 +811,6 @@ skip_rio: qla2x00_alert_all_vps(rsp, mb); } -static void -qla2x00_adjust_sdev_qdepth_up(struct scsi_device *sdev, void *data) -{ - fc_port_t *fcport = data; - struct scsi_qla_host *vha = fcport->vha; - struct qla_hw_data *ha = vha->hw; - struct req_que *req = NULL; - - if (!ql2xqfulltracking) - return; - - req = vha->req; - if (!req) - return; - if (req->max_q_depth <= sdev->queue_depth) - return; - - if (sdev->ordered_tags) - scsi_adjust_queue_depth(sdev, MSG_ORDERED_TAG, - sdev->queue_depth + 1); - else - scsi_adjust_queue_depth(sdev, MSG_SIMPLE_TAG, - sdev->queue_depth + 1); - - fcport->last_ramp_up = jiffies; - - DEBUG2(qla_printk(KERN_INFO, ha, - "scsi(%ld:%d:%d:%d): Queue depth adjusted-up to %d.\n", - fcport->vha->host_no, sdev->channel, sdev->id, sdev->lun, - sdev->queue_depth)); -} - -static void -qla2x00_adjust_sdev_qdepth_down(struct scsi_device *sdev, void *data) -{ - fc_port_t *fcport = data; - - if (!scsi_track_queue_full(sdev, sdev->queue_depth - 1)) - return; - - DEBUG2(qla_printk(KERN_INFO, fcport->vha->hw, - "scsi(%ld:%d:%d:%d): Queue depth adjusted-down to %d.\n", - fcport->vha->host_no, sdev->channel, sdev->id, sdev->lun, - sdev->queue_depth)); -} - -static inline void -qla2x00_ramp_up_queue_depth(scsi_qla_host_t *vha, struct req_que *req, - srb_t *sp) -{ - fc_port_t *fcport; - struct scsi_device *sdev; - - if (!ql2xqfulltracking) - return; - - sdev = sp->cmd->device; - if (sdev->queue_depth >= req->max_q_depth) - return; - - fcport = sp->fcport; - if (time_before(jiffies, - fcport->last_ramp_up + ql2xqfullrampup * HZ)) - return; - if (time_before(jiffies, - fcport->last_queue_full + ql2xqfullrampup * HZ)) - return; - - starget_for_each_device(sdev->sdev_target, fcport, - qla2x00_adjust_sdev_qdepth_up); -} - /** * qla2x00_process_completed_request() - Process a Fast Post response. * @ha: SCSI driver HA context @@ -913,8 +841,6 @@ qla2x00_process_completed_request(struct scsi_qla_host *vha, /* Save ISP completion status */ sp->cmd->result = DID_OK << 16; - - qla2x00_ramp_up_queue_depth(vha, req, sp); qla2x00_sp_compl(ha, sp); } else { DEBUG2(printk("scsi(%ld) Req:%d: Invalid ISP SCSI completion" @@ -1435,13 +1361,6 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt) "scsi(%ld): QUEUE FULL status detected " "0x%x-0x%x.\n", vha->host_no, comp_status, scsi_status)); - - /* Adjust queue depth for all luns on the port. */ - if (!ql2xqfulltracking) - break; - fcport->last_queue_full = jiffies; - starget_for_each_device(cp->device->sdev_target, - fcport, qla2x00_adjust_sdev_qdepth_down); break; } if (lscsi_status != SS_CHECK_CONDITION) @@ -1516,17 +1435,6 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt) "scsi(%ld): QUEUE FULL status detected " "0x%x-0x%x.\n", vha->host_no, comp_status, scsi_status)); - - /* - * Adjust queue depth for all luns on the - * port. - */ - if (!ql2xqfulltracking) - break; - fcport->last_queue_full = jiffies; - starget_for_each_device( - cp->device->sdev_target, fcport, - qla2x00_adjust_sdev_qdepth_down); break; } if (lscsi_status != SS_CHECK_CONDITION) @@ -2020,7 +1928,7 @@ qla24xx_msix_rsp_q(int irq, void *dev_id) vha = qla25xx_get_host(rsp); qla24xx_process_response_queue(vha, rsp); - if (!ha->mqenable) { + if (!ha->flags.disable_msix_handshake) { WRT_REG_DWORD(®->hccr, HCCRX_CLR_RISC_INT); RD_REG_DWORD_RELAXED(®->hccr); } @@ -2034,6 +1942,7 @@ qla25xx_msix_rsp_q(int irq, void *dev_id) { struct qla_hw_data *ha; struct rsp_que *rsp; + struct device_reg_24xx __iomem *reg; rsp = (struct rsp_que *) dev_id; if (!rsp) { @@ -2043,6 +1952,14 @@ qla25xx_msix_rsp_q(int irq, void *dev_id) } ha = rsp->hw; + /* Clear the interrupt, if enabled, for this response queue */ + if (rsp->options & ~BIT_6) { + reg = &ha->iobase->isp24; + spin_lock_irq(&ha->hardware_lock); + WRT_REG_DWORD(®->hccr, HCCRX_CLR_RISC_INT); + RD_REG_DWORD_RELAXED(®->hccr); + spin_unlock_irq(&ha->hardware_lock); + } queue_work_on((int) (rsp->id - 1), ha->wq, &rsp->q_work); return IRQ_HANDLED; diff --git a/drivers/scsi/qla2xxx/qla_mid.c b/drivers/scsi/qla2xxx/qla_mid.c index a47d34308a3a..2a4c7f4e7b69 100644 --- a/drivers/scsi/qla2xxx/qla_mid.c +++ b/drivers/scsi/qla2xxx/qla_mid.c @@ -696,6 +696,10 @@ qla25xx_create_rsp_que(struct qla_hw_data *ha, uint16_t options, /* Use alternate PCI devfn */ if (LSB(rsp->rid)) options |= BIT_5; + /* Enable MSIX handshake mode on for uncapable adapters */ + if (!IS_MSIX_NACK_CAPABLE(ha)) + options |= BIT_6; + rsp->options = options; rsp->id = que_id; reg = ISP_QUE_REG(ha, que_id); diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 41669357b186..2f873d237325 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -78,21 +78,6 @@ module_param(ql2xmaxqdepth, int, S_IRUGO|S_IWUSR); MODULE_PARM_DESC(ql2xmaxqdepth, "Maximum queue depth to report for target devices."); -int ql2xqfulltracking = 1; -module_param(ql2xqfulltracking, int, S_IRUGO|S_IWUSR); -MODULE_PARM_DESC(ql2xqfulltracking, - "Controls whether the driver tracks queue full status " - "returns and dynamically adjusts a scsi device's queue " - "depth. Default is 1, perform tracking. Set to 0 to " - "disable dynamic tracking and adjustment of queue depth."); - -int ql2xqfullrampup = 120; -module_param(ql2xqfullrampup, int, S_IRUGO|S_IWUSR); -MODULE_PARM_DESC(ql2xqfullrampup, - "Number of seconds to wait to begin to ramp-up the queue " - "depth for a device after a queue-full condition has been " - "detected. Default is 120 seconds."); - int ql2xiidmaenable=1; module_param(ql2xiidmaenable, int, S_IRUGO|S_IRUSR); MODULE_PARM_DESC(ql2xiidmaenable, @@ -1217,13 +1202,61 @@ qla2xxx_slave_destroy(struct scsi_device *sdev) sdev->hostdata = NULL; } +static void qla2x00_handle_queue_full(struct scsi_device *sdev, int qdepth) +{ + fc_port_t *fcport = (struct fc_port *) sdev->hostdata; + + if (!scsi_track_queue_full(sdev, qdepth)) + return; + + DEBUG2(qla_printk(KERN_INFO, fcport->vha->hw, + "scsi(%ld:%d:%d:%d): Queue depth adjusted-down to %d.\n", + fcport->vha->host_no, sdev->channel, sdev->id, sdev->lun, + sdev->queue_depth)); +} + +static void qla2x00_adjust_sdev_qdepth_up(struct scsi_device *sdev, int qdepth) +{ + fc_port_t *fcport = sdev->hostdata; + struct scsi_qla_host *vha = fcport->vha; + struct qla_hw_data *ha = vha->hw; + struct req_que *req = NULL; + + req = vha->req; + if (!req) + return; + + if (req->max_q_depth <= sdev->queue_depth || req->max_q_depth < qdepth) + return; + + if (sdev->ordered_tags) + scsi_adjust_queue_depth(sdev, MSG_ORDERED_TAG, qdepth); + else + scsi_adjust_queue_depth(sdev, MSG_SIMPLE_TAG, qdepth); + + DEBUG2(qla_printk(KERN_INFO, ha, + "scsi(%ld:%d:%d:%d): Queue depth adjusted-up to %d.\n", + fcport->vha->host_no, sdev->channel, sdev->id, sdev->lun, + sdev->queue_depth)); +} + static int qla2x00_change_queue_depth(struct scsi_device *sdev, int qdepth, int reason) { - if (reason != SCSI_QDEPTH_DEFAULT) - return -EOPNOTSUPP; + switch (reason) { + case SCSI_QDEPTH_DEFAULT: + scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), qdepth); + break; + case SCSI_QDEPTH_QFULL: + qla2x00_handle_queue_full(sdev, qdepth); + break; + case SCSI_QDEPTH_RAMP_UP: + qla2x00_adjust_sdev_qdepth_up(sdev, qdepth); + break; + default: + return EOPNOTSUPP; + } - scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), qdepth); return sdev->queue_depth; } @@ -2003,13 +2036,13 @@ skip_dpc: DEBUG2(printk("DEBUG: detect hba %ld at address = %p\n", base_vha->host_no, ha)); - base_vha->flags.init_done = 1; - base_vha->flags.online = 1; - ret = scsi_add_host(host, &pdev->dev); if (ret) goto probe_failed; + base_vha->flags.init_done = 1; + base_vha->flags.online = 1; + ha->isp_ops->enable_intrs(ha); scsi_scan_host(host); diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h index 807e0dbc67fa..c482220f7eed 100644 --- a/drivers/scsi/qla2xxx/qla_version.h +++ b/drivers/scsi/qla2xxx/qla_version.h @@ -7,7 +7,7 @@ /* * Driver version */ -#define QLA2XXX_VERSION "8.03.01-k7" +#define QLA2XXX_VERSION "8.03.01-k8" #define QLA_DRIVER_MAJOR_VER 8 #define QLA_DRIVER_MINOR_VER 3 diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index e495d3813948..d8927681ec88 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -859,6 +859,7 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes) case 0x07: /* operation in progress */ case 0x08: /* Long write in progress */ case 0x09: /* self test in progress */ + case 0x14: /* space allocation in progress */ action = ACTION_DELAYED_RETRY; break; default: diff --git a/drivers/scsi/scsi_transport_fc.c b/drivers/scsi/scsi_transport_fc.c index 6531c91501be..ddfcecd5099f 100644 --- a/drivers/scsi/scsi_transport_fc.c +++ b/drivers/scsi/scsi_transport_fc.c @@ -649,11 +649,22 @@ static __init int fc_transport_init(void) return error; error = transport_class_register(&fc_vport_class); if (error) - return error; + goto unreg_host_class; error = transport_class_register(&fc_rport_class); if (error) - return error; - return transport_class_register(&fc_transport_class); + goto unreg_vport_class; + error = transport_class_register(&fc_transport_class); + if (error) + goto unreg_rport_class; + return 0; + +unreg_rport_class: + transport_class_unregister(&fc_rport_class); +unreg_vport_class: + transport_class_unregister(&fc_vport_class); +unreg_host_class: + transport_class_unregister(&fc_host_class); + return error; } static void __exit fc_transport_exit(void) diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index 9093c7261f33..255da53e5a01 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -264,6 +264,15 @@ sd_show_app_tag_own(struct device *dev, struct device_attribute *attr, return snprintf(buf, 20, "%u\n", sdkp->ATO); } +static ssize_t +sd_show_thin_provisioning(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct scsi_disk *sdkp = to_scsi_disk(dev); + + return snprintf(buf, 20, "%u\n", sdkp->thin_provisioning); +} + static struct device_attribute sd_disk_attrs[] = { __ATTR(cache_type, S_IRUGO|S_IWUSR, sd_show_cache_type, sd_store_cache_type), @@ -274,6 +283,7 @@ static struct device_attribute sd_disk_attrs[] = { sd_store_manage_start_stop), __ATTR(protection_type, S_IRUGO, sd_show_protection_type, NULL), __ATTR(app_tag_own, S_IRUGO, sd_show_app_tag_own, NULL), + __ATTR(thin_provisioning, S_IRUGO, sd_show_thin_provisioning, NULL), __ATTR_NULL, }; @@ -399,6 +409,57 @@ static void sd_prot_op(struct scsi_cmnd *scmd, unsigned int dif) } /** + * sd_prepare_discard - unmap blocks on thinly provisioned device + * @rq: Request to prepare + * + * Will issue either UNMAP or WRITE SAME(16) depending on preference + * indicated by target device. + **/ +static int sd_prepare_discard(struct request *rq) +{ + struct scsi_disk *sdkp = scsi_disk(rq->rq_disk); + struct bio *bio = rq->bio; + sector_t sector = bio->bi_sector; + unsigned int num = bio_sectors(bio); + + if (sdkp->device->sector_size == 4096) { + sector >>= 3; + num >>= 3; + } + + rq->cmd_type = REQ_TYPE_BLOCK_PC; + rq->timeout = SD_TIMEOUT; + + memset(rq->cmd, 0, rq->cmd_len); + + if (sdkp->unmap) { + char *buf = kmap_atomic(bio_page(bio), KM_USER0); + + rq->cmd[0] = UNMAP; + rq->cmd[8] = 24; + rq->cmd_len = 10; + + /* Ensure that data length matches payload */ + rq->__data_len = bio->bi_size = bio->bi_io_vec->bv_len = 24; + + put_unaligned_be16(6 + 16, &buf[0]); + put_unaligned_be16(16, &buf[2]); + put_unaligned_be64(sector, &buf[8]); + put_unaligned_be32(num, &buf[16]); + + kunmap_atomic(buf, KM_USER0); + } else { + rq->cmd[0] = WRITE_SAME_16; + rq->cmd[1] = 0x8; /* UNMAP */ + put_unaligned_be64(sector, &rq->cmd[2]); + put_unaligned_be32(num, &rq->cmd[10]); + rq->cmd_len = 16; + } + + return BLKPREP_OK; +} + +/** * sd_init_command - build a scsi (read or write) command from * information in the request structure. * @SCpnt: pointer to mid-level's per scsi command structure that @@ -418,6 +479,13 @@ static int sd_prep_fn(struct request_queue *q, struct request *rq) int ret, host_dif; unsigned char protect; + /* + * Discard request come in as REQ_TYPE_FS but we turn them into + * block PC requests to make life easier. + */ + if (blk_discard_rq(rq)) + ret = sd_prepare_discard(rq); + if (rq->cmd_type == REQ_TYPE_BLOCK_PC) { ret = scsi_setup_blk_pc_cmnd(sdp, rq); goto out; @@ -1432,6 +1500,19 @@ static int read_capacity_16(struct scsi_disk *sdkp, struct scsi_device *sdp, sd_printk(KERN_NOTICE, sdkp, "physical block alignment offset: %u\n", alignment); + if (buffer[14] & 0x80) { /* TPE */ + struct request_queue *q = sdp->request_queue; + + sdkp->thin_provisioning = 1; + q->limits.discard_granularity = sdkp->hw_sector_size; + q->limits.max_discard_sectors = 0xffffffff; + + if (buffer[14] & 0x40) /* TPRZ */ + q->limits.discard_zeroes_data = 1; + + queue_flag_set_unlocked(QUEUE_FLAG_DISCARD, q); + } + sdkp->capacity = lba + 1; return sector_size; } @@ -1863,6 +1944,7 @@ void sd_read_app_tag_own(struct scsi_disk *sdkp, unsigned char *buffer) */ static void sd_read_block_limits(struct scsi_disk *sdkp) { + struct request_queue *q = sdkp->disk->queue; unsigned int sector_sz = sdkp->device->sector_size; char *buffer; @@ -1877,6 +1959,31 @@ static void sd_read_block_limits(struct scsi_disk *sdkp) blk_queue_io_opt(sdkp->disk->queue, get_unaligned_be32(&buffer[12]) * sector_sz); + /* Thin provisioning enabled and page length indicates TP support */ + if (sdkp->thin_provisioning && buffer[3] == 0x3c) { + unsigned int lba_count, desc_count, granularity; + + lba_count = get_unaligned_be32(&buffer[20]); + desc_count = get_unaligned_be32(&buffer[24]); + + if (lba_count) { + q->limits.max_discard_sectors = + lba_count * sector_sz >> 9; + + if (desc_count) + sdkp->unmap = 1; + } + + granularity = get_unaligned_be32(&buffer[28]); + + if (granularity) + q->limits.discard_granularity = granularity * sector_sz; + + if (buffer[32] & 0x80) + q->limits.discard_alignment = + get_unaligned_be32(&buffer[32]) & ~(1 << 31); + } + kfree(buffer); } diff --git a/drivers/scsi/sd.h b/drivers/scsi/sd.h index e374804d26fb..43d3caf268ef 100644 --- a/drivers/scsi/sd.h +++ b/drivers/scsi/sd.h @@ -60,6 +60,8 @@ struct scsi_disk { unsigned RCD : 1; /* state of disk RCD bit, unused */ unsigned DPOFUA : 1; /* state of disk DPOFUA bit */ unsigned first_scan : 1; + unsigned thin_provisioning : 1; + unsigned unmap : 1; }; #define to_scsi_disk(obj) container_of(obj,struct scsi_disk,dev) diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c index ad59abb47722..d04ea9a6f673 100644 --- a/drivers/scsi/st.c +++ b/drivers/scsi/st.c @@ -552,13 +552,15 @@ st_do_scsi(struct st_request * SRpnt, struct scsi_tape * STp, unsigned char *cmd SRpnt->waiting = waiting; if (STp->buffer->do_dio) { + mdata->page_order = 0; mdata->nr_entries = STp->buffer->sg_segs; mdata->pages = STp->buffer->mapped_pages; } else { + mdata->page_order = STp->buffer->reserved_page_order; mdata->nr_entries = DIV_ROUND_UP(bytes, PAGE_SIZE << mdata->page_order); - STp->buffer->map_data.pages = STp->buffer->reserved_pages; - STp->buffer->map_data.offset = 0; + mdata->pages = STp->buffer->reserved_pages; + mdata->offset = 0; } memcpy(SRpnt->cmd, cmd, sizeof(SRpnt->cmd)); @@ -3719,7 +3721,7 @@ static int enlarge_buffer(struct st_buffer * STbuffer, int new_size, int need_dm priority |= __GFP_ZERO; if (STbuffer->frp_segs) { - order = STbuffer->map_data.page_order; + order = STbuffer->reserved_page_order; b_size = PAGE_SIZE << order; } else { for (b_size = PAGE_SIZE, order = 0; @@ -3752,7 +3754,7 @@ static int enlarge_buffer(struct st_buffer * STbuffer, int new_size, int need_dm segs++; } STbuffer->b_data = page_address(STbuffer->reserved_pages[0]); - STbuffer->map_data.page_order = order; + STbuffer->reserved_page_order = order; return 1; } @@ -3765,7 +3767,7 @@ static void clear_buffer(struct st_buffer * st_bp) for (i=0; i < st_bp->frp_segs; i++) memset(page_address(st_bp->reserved_pages[i]), 0, - PAGE_SIZE << st_bp->map_data.page_order); + PAGE_SIZE << st_bp->reserved_page_order); st_bp->cleared = 1; } @@ -3773,7 +3775,7 @@ static void clear_buffer(struct st_buffer * st_bp) /* Release the extra buffer */ static void normalize_buffer(struct st_buffer * STbuffer) { - int i, order = STbuffer->map_data.page_order; + int i, order = STbuffer->reserved_page_order; for (i = 0; i < STbuffer->frp_segs; i++) { __free_pages(STbuffer->reserved_pages[i], order); @@ -3781,7 +3783,7 @@ static void normalize_buffer(struct st_buffer * STbuffer) } STbuffer->frp_segs = 0; STbuffer->sg_segs = 0; - STbuffer->map_data.page_order = 0; + STbuffer->reserved_page_order = 0; STbuffer->map_data.offset = 0; } @@ -3791,7 +3793,7 @@ static void normalize_buffer(struct st_buffer * STbuffer) static int append_to_buffer(const char __user *ubp, struct st_buffer * st_bp, int do_count) { int i, cnt, res, offset; - int length = PAGE_SIZE << st_bp->map_data.page_order; + int length = PAGE_SIZE << st_bp->reserved_page_order; for (i = 0, offset = st_bp->buffer_bytes; i < st_bp->frp_segs && offset >= length; i++) @@ -3823,7 +3825,7 @@ static int append_to_buffer(const char __user *ubp, struct st_buffer * st_bp, in static int from_buffer(struct st_buffer * st_bp, char __user *ubp, int do_count) { int i, cnt, res, offset; - int length = PAGE_SIZE << st_bp->map_data.page_order; + int length = PAGE_SIZE << st_bp->reserved_page_order; for (i = 0, offset = st_bp->read_pointer; i < st_bp->frp_segs && offset >= length; i++) @@ -3856,7 +3858,7 @@ static void move_buffer_data(struct st_buffer * st_bp, int offset) { int src_seg, dst_seg, src_offset = 0, dst_offset; int count, total; - int length = PAGE_SIZE << st_bp->map_data.page_order; + int length = PAGE_SIZE << st_bp->reserved_page_order; if (offset == 0) return; @@ -4578,7 +4580,6 @@ static int sgl_map_user_pages(struct st_buffer *STbp, } mdata->offset = uaddr & ~PAGE_MASK; - mdata->page_order = 0; STbp->mapped_pages = pages; return nr_pages; diff --git a/drivers/scsi/st.h b/drivers/scsi/st.h index 544dc6b1f548..f91a67c6d968 100644 --- a/drivers/scsi/st.h +++ b/drivers/scsi/st.h @@ -46,6 +46,7 @@ struct st_buffer { struct st_request *last_SRpnt; struct st_cmdstatus cmdstat; struct page **reserved_pages; + int reserved_page_order; struct page **mapped_pages; struct rq_map_data map_data; unsigned char *b_data; diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index 68c7f6cfd728..37f0de9dd9ce 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -222,9 +222,9 @@ static inline void sci_init_pins(struct uart_port *port, unsigned int cflag) Set SCP6MD1,0 = {01} (output) */ __raw_writew((data & 0x0fcf) | 0x1000, SCPCR); - data = ctrl_inb(SCPDR); + data = __raw_readb(SCPDR); /* Set /RTS2 (bit6) = 0 */ - ctrl_outb(data & 0xbf, SCPDR); + __raw_writeb(data & 0xbf, SCPDR); } } #elif defined(CONFIG_CPU_SUBTYPE_SH7722) @@ -897,11 +897,21 @@ static void sci_shutdown(struct uart_port *port) static void sci_set_termios(struct uart_port *port, struct ktermios *termios, struct ktermios *old) { - unsigned int status, baud, smr_val; + unsigned int status, baud, smr_val, max_baud; int t = -1; - baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); - if (likely(baud)) + /* + * earlyprintk comes here early on with port->uartclk set to zero. + * the clock framework is not up and running at this point so here + * we assume that 115200 is the maximum baud rate. please note that + * the baud rate is not programmed during earlyprintk - it is assumed + * that the previous boot loader has enabled required clocks and + * setup the baud rate generator hardware for us already. + */ + max_baud = port->uartclk ? port->uartclk / 16 : 115200; + + baud = uart_get_baud_rate(port, termios, old, 0, max_baud); + if (likely(baud && port->uartclk)) t = SCBRR_VALUE(baud, port->uartclk); do { diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h index a32094eeb42b..0efcded59ae6 100644 --- a/drivers/serial/sh-sci.h +++ b/drivers/serial/sh-sci.h @@ -517,20 +517,20 @@ static const struct __attribute__((packed)) { static inline int sci_rxd_in(struct uart_port *port) { if (port->mapbase == 0xfffffe80) - return ctrl_inb(SCPDR)&0x01 ? 1 : 0; /* SCI */ + return __raw_readb(SCPDR)&0x01 ? 1 : 0; /* SCI */ if (port->mapbase == 0xa4000150) - return ctrl_inb(SCPDR)&0x10 ? 1 : 0; /* SCIF */ + return __raw_readb(SCPDR)&0x10 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xa4000140) - return ctrl_inb(SCPDR)&0x04 ? 1 : 0; /* IRDA */ + return __raw_readb(SCPDR)&0x04 ? 1 : 0; /* IRDA */ return 1; } #elif defined(CONFIG_CPU_SUBTYPE_SH7705) static inline int sci_rxd_in(struct uart_port *port) { if (port->mapbase == SCIF0) - return ctrl_inb(SCPDR)&0x04 ? 1 : 0; /* IRDA */ + return __raw_readb(SCPDR)&0x04 ? 1 : 0; /* IRDA */ if (port->mapbase == SCIF2) - return ctrl_inb(SCPDR)&0x10 ? 1 : 0; /* SCIF */ + return __raw_readb(SCPDR)&0x10 ? 1 : 0; /* SCIF */ return 1; } #elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712) @@ -557,68 +557,68 @@ static inline int sci_rxd_in(struct uart_port *port) static inline int sci_rxd_in(struct uart_port *port) { if (port->mapbase == 0xffe00000) - return ctrl_inb(SCSPTR1)&0x01 ? 1 : 0; /* SCI */ + return __raw_readb(SCSPTR1)&0x01 ? 1 : 0; /* SCI */ if (port->mapbase == 0xffe80000) - return ctrl_inw(SCSPTR2)&0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR2)&0x0001 ? 1 : 0; /* SCIF */ return 1; } #elif defined(CONFIG_CPU_SUBTYPE_SH4_202) static inline int sci_rxd_in(struct uart_port *port) { if (port->mapbase == 0xffe80000) - return ctrl_inw(SCSPTR2)&0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR2)&0x0001 ? 1 : 0; /* SCIF */ return 1; } #elif defined(CONFIG_CPU_SUBTYPE_SH7757) static inline int sci_rxd_in(struct uart_port *port) { if (port->mapbase == 0xfe4b0000) - return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; + return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; if (port->mapbase == 0xfe4c0000) - return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; + return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; if (port->mapbase == 0xfe4d0000) - return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; + return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; } #elif defined(CONFIG_CPU_SUBTYPE_SH7760) static inline int sci_rxd_in(struct uart_port *port) { if (port->mapbase == 0xfe600000) - return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xfe610000) - return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xfe620000) - return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ return 1; } #elif defined(CONFIG_CPU_SUBTYPE_SH7343) static inline int sci_rxd_in(struct uart_port *port) { if (port->mapbase == 0xffe00000) - return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xffe10000) - return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xffe20000) - return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xffe30000) - return ctrl_inw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */ return 1; } #elif defined(CONFIG_CPU_SUBTYPE_SH7366) static inline int sci_rxd_in(struct uart_port *port) { if (port->mapbase == 0xffe00000) - return ctrl_inb(SCPDR0) & 0x0001 ? 1 : 0; /* SCIF0 */ + return __raw_readb(SCPDR0) & 0x0001 ? 1 : 0; /* SCIF0 */ return 1; } #elif defined(CONFIG_CPU_SUBTYPE_SH7722) static inline int sci_rxd_in(struct uart_port *port) { if (port->mapbase == 0xffe00000) - return ctrl_inb(PSDR) & 0x02 ? 1 : 0; /* SCIF0 */ + return __raw_readb(PSDR) & 0x02 ? 1 : 0; /* SCIF0 */ if (port->mapbase == 0xffe10000) - return ctrl_inb(PADR) & 0x40 ? 1 : 0; /* SCIF1 */ + return __raw_readb(PADR) & 0x40 ? 1 : 0; /* SCIF1 */ if (port->mapbase == 0xffe20000) - return ctrl_inb(PWDR) & 0x04 ? 1 : 0; /* SCIF2 */ + return __raw_readb(PWDR) & 0x04 ? 1 : 0; /* SCIF2 */ return 1; } @@ -626,17 +626,17 @@ static inline int sci_rxd_in(struct uart_port *port) static inline int sci_rxd_in(struct uart_port *port) { if (port->mapbase == 0xffe00000) - return ctrl_inb(SCSPTR0) & 0x0008 ? 1 : 0; /* SCIF0 */ + return __raw_readb(SCSPTR0) & 0x0008 ? 1 : 0; /* SCIF0 */ if (port->mapbase == 0xffe10000) - return ctrl_inb(SCSPTR1) & 0x0020 ? 1 : 0; /* SCIF1 */ + return __raw_readb(SCSPTR1) & 0x0020 ? 1 : 0; /* SCIF1 */ if (port->mapbase == 0xffe20000) - return ctrl_inb(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF2 */ + return __raw_readb(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF2 */ if (port->mapbase == 0xa4e30000) - return ctrl_inb(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF3 */ + return __raw_readb(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF3 */ if (port->mapbase == 0xa4e40000) - return ctrl_inb(SCSPTR4) & 0x0001 ? 1 : 0; /* SCIF4 */ + return __raw_readb(SCSPTR4) & 0x0001 ? 1 : 0; /* SCIF4 */ if (port->mapbase == 0xa4e50000) - return ctrl_inb(SCSPTR5) & 0x0008 ? 1 : 0; /* SCIF5 */ + return __raw_readb(SCSPTR5) & 0x0008 ? 1 : 0; /* SCIF5 */ return 1; } #elif defined(CONFIG_CPU_SUBTYPE_SH7724) @@ -645,9 +645,9 @@ static inline int sci_rxd_in(struct uart_port *port) static inline int sci_rxd_in(struct uart_port *port) { if (port->type == PORT_SCIF) - return ctrl_inw((port->mapbase + SCFSR)) & SCIF_BRK ? 1 : 0; + return __raw_readw((port->mapbase + SCFSR)) & SCIF_BRK ? 1 : 0; if (port->type == PORT_SCIFA) - return ctrl_inw((port->mapbase + SCASSR)) & SCIF_BRK ? 1 : 0; + return __raw_readw((port->mapbase + SCASSR)) & SCIF_BRK ? 1 : 0; return 1; } #elif defined(CONFIG_CPU_SUBTYPE_SH5_101) || defined(CONFIG_CPU_SUBTYPE_SH5_103) @@ -665,11 +665,11 @@ static inline int sci_rxd_in(struct uart_port *port) static inline int sci_rxd_in(struct uart_port *port) { if (port->mapbase == 0xffe00000) - return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xffe08000) - return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xffe10000) - return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF/IRDA */ + return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF/IRDA */ return 1; } @@ -677,20 +677,20 @@ static inline int sci_rxd_in(struct uart_port *port) static inline int sci_rxd_in(struct uart_port *port) { if (port->mapbase == 0xff923000) - return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xff924000) - return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xff925000) - return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ return 1; } #elif defined(CONFIG_CPU_SUBTYPE_SH7780) static inline int sci_rxd_in(struct uart_port *port) { if (port->mapbase == 0xffe00000) - return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xffe10000) - return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ return 1; } #elif defined(CONFIG_CPU_SUBTYPE_SH7785) || \ @@ -698,17 +698,17 @@ static inline int sci_rxd_in(struct uart_port *port) static inline int sci_rxd_in(struct uart_port *port) { if (port->mapbase == 0xffea0000) - return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xffeb0000) - return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xffec0000) - return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xffed0000) - return ctrl_inw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xffee0000) - return ctrl_inw(SCSPTR4) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR4) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xffef0000) - return ctrl_inw(SCSPTR5) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR5) & 0x0001 ? 1 : 0; /* SCIF */ return 1; } #elif defined(CONFIG_CPU_SUBTYPE_SH7201) || \ @@ -718,22 +718,22 @@ static inline int sci_rxd_in(struct uart_port *port) static inline int sci_rxd_in(struct uart_port *port) { if (port->mapbase == 0xfffe8000) - return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xfffe8800) - return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xfffe9000) - return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xfffe9800) - return ctrl_inw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */ #if defined(CONFIG_CPU_SUBTYPE_SH7201) if (port->mapbase == 0xfffeA000) - return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xfffeA800) - return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xfffeB000) - return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xfffeB800) - return ctrl_inw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */ #endif return 1; } @@ -741,24 +741,24 @@ static inline int sci_rxd_in(struct uart_port *port) static inline int sci_rxd_in(struct uart_port *port) { if (port->mapbase == 0xf8400000) - return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xf8410000) - return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xf8420000) - return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ return 1; } #elif defined(CONFIG_CPU_SUBTYPE_SHX3) static inline int sci_rxd_in(struct uart_port *port) { if (port->mapbase == 0xffc30000) - return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xffc40000) - return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xffc50000) - return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xffc60000) - return ctrl_inw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */ return 1; } #endif diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 2d9d70359360..f55eb0107336 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -216,6 +216,17 @@ config SPI_S3C24XX help SPI driver for Samsung S3C24XX series ARM SoCs +config SPI_S3C24XX_FIQ + bool "S3C24XX driver with FIQ pseudo-DMA" + depends on SPI_S3C24XX + select FIQ + help + Enable FIQ support for the S3C24XX SPI driver to provide pseudo + DMA by using the fast-interrupt request framework, This allows + the driver to get DMA-like performance when there are either + no free DMA channels, or when doing transfers that required both + TX and RX data paths. + config SPI_S3C24XX_GPIO tristate "Samsung S3C24XX series SPI by GPIO" depends on ARCH_S3C2410 && EXPERIMENTAL @@ -226,6 +237,13 @@ config SPI_S3C24XX_GPIO the inbuilt hardware cannot provide the transfer mode, or where the board is using non hardware connected pins. +config SPI_S3C64XX + tristate "Samsung S3C64XX series type SPI" + depends on ARCH_S3C64XX && EXPERIMENTAL + select S3C64XX_DMA + help + SPI driver for Samsung S3C64XX and newer SoCs. + config SPI_SH_MSIOF tristate "SuperH MSIOF SPI controller" depends on SUPERH && HAVE_CLK @@ -289,6 +307,16 @@ config SPI_NUC900 # Add new SPI master controllers in alphabetical order above this line # +config SPI_DESIGNWARE + bool "DesignWare SPI controller core support" + depends on SPI_MASTER + help + general driver for SPI controller core from DesignWare + +config SPI_DW_PCI + tristate "PCI interface driver for DW SPI core" + depends on SPI_DESIGNWARE && PCI + # # There are lots of SPI device types, with sensors and memory # being probably the most widely used ones. diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index ed8c1675b52f..f3d2810ba11c 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -16,6 +16,8 @@ obj-$(CONFIG_SPI_BFIN) += spi_bfin5xx.o obj-$(CONFIG_SPI_BITBANG) += spi_bitbang.o obj-$(CONFIG_SPI_AU1550) += au1550_spi.o obj-$(CONFIG_SPI_BUTTERFLY) += spi_butterfly.o +obj-$(CONFIG_SPI_DESIGNWARE) += dw_spi.o +obj-$(CONFIG_SPI_DW_PCI) += dw_spi_pci.o obj-$(CONFIG_SPI_GPIO) += spi_gpio.o obj-$(CONFIG_SPI_IMX) += spi_imx.o obj-$(CONFIG_SPI_LM70_LLP) += spi_lm70llp.o @@ -30,7 +32,8 @@ obj-$(CONFIG_SPI_MPC52xx) += mpc52xx_spi.o obj-$(CONFIG_SPI_MPC8xxx) += spi_mpc8xxx.o obj-$(CONFIG_SPI_PPC4xx) += spi_ppc4xx.o obj-$(CONFIG_SPI_S3C24XX_GPIO) += spi_s3c24xx_gpio.o -obj-$(CONFIG_SPI_S3C24XX) += spi_s3c24xx.o +obj-$(CONFIG_SPI_S3C24XX) += spi_s3c24xx_hw.o +obj-$(CONFIG_SPI_S3C64XX) += spi_s3c64xx.o obj-$(CONFIG_SPI_TXX9) += spi_txx9.o obj-$(CONFIG_SPI_XILINX) += xilinx_spi.o obj-$(CONFIG_SPI_XILINX_OF) += xilinx_spi_of.o @@ -39,6 +42,11 @@ obj-$(CONFIG_SPI_SH_SCI) += spi_sh_sci.o obj-$(CONFIG_SPI_SH_MSIOF) += spi_sh_msiof.o obj-$(CONFIG_SPI_STMP3XXX) += spi_stmp.o obj-$(CONFIG_SPI_NUC900) += spi_nuc900.o + +# special build for s3c24xx spi driver with fiq support +spi_s3c24xx_hw-y := spi_s3c24xx.o +spi_s3c24xx_hw-$(CONFIG_SPI_S3C24XX_FIQ) += spi_s3c24xx_fiq.o + # ... add above this line ... # SPI protocol drivers (device/link on bus) diff --git a/drivers/spi/atmel_spi.c b/drivers/spi/atmel_spi.c index f5b3fdbb1e27..d21c24eaf0a9 100644 --- a/drivers/spi/atmel_spi.c +++ b/drivers/spi/atmel_spi.c @@ -189,14 +189,14 @@ static void atmel_spi_next_xfer_data(struct spi_master *master, /* use scratch buffer only when rx or tx data is unspecified */ if (xfer->rx_buf) - *rx_dma = xfer->rx_dma + xfer->len - len; + *rx_dma = xfer->rx_dma + xfer->len - *plen; else { *rx_dma = as->buffer_dma; if (len > BUFFER_SIZE) len = BUFFER_SIZE; } if (xfer->tx_buf) - *tx_dma = xfer->tx_dma + xfer->len - len; + *tx_dma = xfer->tx_dma + xfer->len - *plen; else { *tx_dma = as->buffer_dma; if (len > BUFFER_SIZE) @@ -788,7 +788,7 @@ static int __init atmel_spi_probe(struct platform_device *pdev) spin_lock_init(&as->lock); INIT_LIST_HEAD(&as->queue); as->pdev = pdev; - as->regs = ioremap(regs->start, (regs->end - regs->start) + 1); + as->regs = ioremap(regs->start, resource_size(regs)); if (!as->regs) goto out_free_buffer; as->irq = irq; diff --git a/drivers/spi/dw_spi.c b/drivers/spi/dw_spi.c new file mode 100644 index 000000000000..31620fae77be --- /dev/null +++ b/drivers/spi/dw_spi.c @@ -0,0 +1,944 @@ +/* + * dw_spi.c - Designware SPI core controller driver (refer pxa2xx_spi.c) + * + * Copyright (c) 2009, Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#include <linux/dma-mapping.h> +#include <linux/interrupt.h> +#include <linux/highmem.h> +#include <linux/delay.h> + +#include <linux/spi/dw_spi.h> +#include <linux/spi/spi.h> + +#ifdef CONFIG_DEBUG_FS +#include <linux/debugfs.h> +#endif + +#define START_STATE ((void *)0) +#define RUNNING_STATE ((void *)1) +#define DONE_STATE ((void *)2) +#define ERROR_STATE ((void *)-1) + +#define QUEUE_RUNNING 0 +#define QUEUE_STOPPED 1 + +#define MRST_SPI_DEASSERT 0 +#define MRST_SPI_ASSERT 1 + +/* Slave spi_dev related */ +struct chip_data { + u16 cr0; + u8 cs; /* chip select pin */ + u8 n_bytes; /* current is a 1/2/4 byte op */ + u8 tmode; /* TR/TO/RO/EEPROM */ + u8 type; /* SPI/SSP/MicroWire */ + + u8 poll_mode; /* 1 means use poll mode */ + + u32 dma_width; + u32 rx_threshold; + u32 tx_threshold; + u8 enable_dma; + u8 bits_per_word; + u16 clk_div; /* baud rate divider */ + u32 speed_hz; /* baud rate */ + int (*write)(struct dw_spi *dws); + int (*read)(struct dw_spi *dws); + void (*cs_control)(u32 command); +}; + +#ifdef CONFIG_DEBUG_FS +static int spi_show_regs_open(struct inode *inode, struct file *file) +{ + file->private_data = inode->i_private; + return 0; +} + +#define SPI_REGS_BUFSIZE 1024 +static ssize_t spi_show_regs(struct file *file, char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct dw_spi *dws; + char *buf; + u32 len = 0; + ssize_t ret; + + dws = file->private_data; + + buf = kzalloc(SPI_REGS_BUFSIZE, GFP_KERNEL); + if (!buf) + return 0; + + len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, + "MRST SPI0 registers:\n"); + len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, + "=================================\n"); + len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, + "CTRL0: \t\t0x%08x\n", dw_readl(dws, ctrl0)); + len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, + "CTRL1: \t\t0x%08x\n", dw_readl(dws, ctrl1)); + len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, + "SSIENR: \t0x%08x\n", dw_readl(dws, ssienr)); + len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, + "SER: \t\t0x%08x\n", dw_readl(dws, ser)); + len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, + "BAUDR: \t\t0x%08x\n", dw_readl(dws, baudr)); + len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, + "TXFTLR: \t0x%08x\n", dw_readl(dws, txfltr)); + len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, + "RXFTLR: \t0x%08x\n", dw_readl(dws, rxfltr)); + len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, + "TXFLR: \t\t0x%08x\n", dw_readl(dws, txflr)); + len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, + "RXFLR: \t\t0x%08x\n", dw_readl(dws, rxflr)); + len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, + "SR: \t\t0x%08x\n", dw_readl(dws, sr)); + len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, + "IMR: \t\t0x%08x\n", dw_readl(dws, imr)); + len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, + "ISR: \t\t0x%08x\n", dw_readl(dws, isr)); + len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, + "DMACR: \t\t0x%08x\n", dw_readl(dws, dmacr)); + len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, + "DMATDLR: \t0x%08x\n", dw_readl(dws, dmatdlr)); + len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, + "DMARDLR: \t0x%08x\n", dw_readl(dws, dmardlr)); + len += snprintf(buf + len, SPI_REGS_BUFSIZE - len, + "=================================\n"); + + ret = simple_read_from_buffer(user_buf, count, ppos, buf, len); + kfree(buf); + return ret; +} + +static const struct file_operations mrst_spi_regs_ops = { + .owner = THIS_MODULE, + .open = spi_show_regs_open, + .read = spi_show_regs, +}; + +static int mrst_spi_debugfs_init(struct dw_spi *dws) +{ + dws->debugfs = debugfs_create_dir("mrst_spi", NULL); + if (!dws->debugfs) + return -ENOMEM; + + debugfs_create_file("registers", S_IFREG | S_IRUGO, + dws->debugfs, (void *)dws, &mrst_spi_regs_ops); + return 0; +} + +static void mrst_spi_debugfs_remove(struct dw_spi *dws) +{ + if (dws->debugfs) + debugfs_remove_recursive(dws->debugfs); +} + +#else +static inline int mrst_spi_debugfs_init(struct dw_spi *dws) +{ +} + +static inline void mrst_spi_debugfs_remove(struct dw_spi *dws) +{ +} +#endif /* CONFIG_DEBUG_FS */ + +static void wait_till_not_busy(struct dw_spi *dws) +{ + unsigned long end = jiffies + usecs_to_jiffies(1000); + + while (time_before(jiffies, end)) { + if (!(dw_readw(dws, sr) & SR_BUSY)) + return; + } + dev_err(&dws->master->dev, + "DW SPI: Stutus keeps busy for 1000us after a read/write!\n"); +} + +static void flush(struct dw_spi *dws) +{ + while (dw_readw(dws, sr) & SR_RF_NOT_EMPT) + dw_readw(dws, dr); + + wait_till_not_busy(dws); +} + +static void null_cs_control(u32 command) +{ +} + +static int null_writer(struct dw_spi *dws) +{ + u8 n_bytes = dws->n_bytes; + + if (!(dw_readw(dws, sr) & SR_TF_NOT_FULL) + || (dws->tx == dws->tx_end)) + return 0; + dw_writew(dws, dr, 0); + dws->tx += n_bytes; + + wait_till_not_busy(dws); + return 1; +} + +static int null_reader(struct dw_spi *dws) +{ + u8 n_bytes = dws->n_bytes; + + while ((dw_readw(dws, sr) & SR_RF_NOT_EMPT) + && (dws->rx < dws->rx_end)) { + dw_readw(dws, dr); + dws->rx += n_bytes; + } + wait_till_not_busy(dws); + return dws->rx == dws->rx_end; +} + +static int u8_writer(struct dw_spi *dws) +{ + if (!(dw_readw(dws, sr) & SR_TF_NOT_FULL) + || (dws->tx == dws->tx_end)) + return 0; + + dw_writew(dws, dr, *(u8 *)(dws->tx)); + ++dws->tx; + + wait_till_not_busy(dws); + return 1; +} + +static int u8_reader(struct dw_spi *dws) +{ + while ((dw_readw(dws, sr) & SR_RF_NOT_EMPT) + && (dws->rx < dws->rx_end)) { + *(u8 *)(dws->rx) = dw_readw(dws, dr); + ++dws->rx; + } + + wait_till_not_busy(dws); + return dws->rx == dws->rx_end; +} + +static int u16_writer(struct dw_spi *dws) +{ + if (!(dw_readw(dws, sr) & SR_TF_NOT_FULL) + || (dws->tx == dws->tx_end)) + return 0; + + dw_writew(dws, dr, *(u16 *)(dws->tx)); + dws->tx += 2; + + wait_till_not_busy(dws); + return 1; +} + +static int u16_reader(struct dw_spi *dws) +{ + u16 temp; + + while ((dw_readw(dws, sr) & SR_RF_NOT_EMPT) + && (dws->rx < dws->rx_end)) { + temp = dw_readw(dws, dr); + *(u16 *)(dws->rx) = temp; + dws->rx += 2; + } + + wait_till_not_busy(dws); + return dws->rx == dws->rx_end; +} + +static void *next_transfer(struct dw_spi *dws) +{ + struct spi_message *msg = dws->cur_msg; + struct spi_transfer *trans = dws->cur_transfer; + + /* Move to next transfer */ + if (trans->transfer_list.next != &msg->transfers) { + dws->cur_transfer = + list_entry(trans->transfer_list.next, + struct spi_transfer, + transfer_list); + return RUNNING_STATE; + } else + return DONE_STATE; +} + +/* + * Note: first step is the protocol driver prepares + * a dma-capable memory, and this func just need translate + * the virt addr to physical + */ +static int map_dma_buffers(struct dw_spi *dws) +{ + if (!dws->cur_msg->is_dma_mapped || !dws->dma_inited + || !dws->cur_chip->enable_dma) + return 0; + + if (dws->cur_transfer->tx_dma) + dws->tx_dma = dws->cur_transfer->tx_dma; + + if (dws->cur_transfer->rx_dma) + dws->rx_dma = dws->cur_transfer->rx_dma; + + return 1; +} + +/* Caller already set message->status; dma and pio irqs are blocked */ +static void giveback(struct dw_spi *dws) +{ + struct spi_transfer *last_transfer; + unsigned long flags; + struct spi_message *msg; + + spin_lock_irqsave(&dws->lock, flags); + msg = dws->cur_msg; + dws->cur_msg = NULL; + dws->cur_transfer = NULL; + dws->prev_chip = dws->cur_chip; + dws->cur_chip = NULL; + dws->dma_mapped = 0; + queue_work(dws->workqueue, &dws->pump_messages); + spin_unlock_irqrestore(&dws->lock, flags); + + last_transfer = list_entry(msg->transfers.prev, + struct spi_transfer, + transfer_list); + + if (!last_transfer->cs_change) + dws->cs_control(MRST_SPI_DEASSERT); + + msg->state = NULL; + if (msg->complete) + msg->complete(msg->context); +} + +static void int_error_stop(struct dw_spi *dws, const char *msg) +{ + /* Stop and reset hw */ + flush(dws); + spi_enable_chip(dws, 0); + + dev_err(&dws->master->dev, "%s\n", msg); + dws->cur_msg->state = ERROR_STATE; + tasklet_schedule(&dws->pump_transfers); +} + +static void transfer_complete(struct dw_spi *dws) +{ + /* Update total byte transfered return count actual bytes read */ + dws->cur_msg->actual_length += dws->len; + + /* Move to next transfer */ + dws->cur_msg->state = next_transfer(dws); + + /* Handle end of message */ + if (dws->cur_msg->state == DONE_STATE) { + dws->cur_msg->status = 0; + giveback(dws); + } else + tasklet_schedule(&dws->pump_transfers); +} + +static irqreturn_t interrupt_transfer(struct dw_spi *dws) +{ + u16 irq_status, irq_mask = 0x3f; + + irq_status = dw_readw(dws, isr) & irq_mask; + /* Error handling */ + if (irq_status & (SPI_INT_TXOI | SPI_INT_RXOI | SPI_INT_RXUI)) { + dw_readw(dws, txoicr); + dw_readw(dws, rxoicr); + dw_readw(dws, rxuicr); + int_error_stop(dws, "interrupt_transfer: fifo overrun"); + return IRQ_HANDLED; + } + + /* INT comes from tx */ + if (dws->tx && (irq_status & SPI_INT_TXEI)) { + while (dws->tx < dws->tx_end) + dws->write(dws); + + if (dws->tx == dws->tx_end) { + spi_mask_intr(dws, SPI_INT_TXEI); + transfer_complete(dws); + } + } + + /* INT comes from rx */ + if (dws->rx && (irq_status & SPI_INT_RXFI)) { + if (dws->read(dws)) + transfer_complete(dws); + } + return IRQ_HANDLED; +} + +static irqreturn_t dw_spi_irq(int irq, void *dev_id) +{ + struct dw_spi *dws = dev_id; + + if (!dws->cur_msg) { + spi_mask_intr(dws, SPI_INT_TXEI); + /* Never fail */ + return IRQ_HANDLED; + } + + return dws->transfer_handler(dws); +} + +/* Must be called inside pump_transfers() */ +static void poll_transfer(struct dw_spi *dws) +{ + if (dws->tx) { + while (dws->write(dws)) + dws->read(dws); + } + + dws->read(dws); + transfer_complete(dws); +} + +static void dma_transfer(struct dw_spi *dws, int cs_change) +{ +} + +static void pump_transfers(unsigned long data) +{ + struct dw_spi *dws = (struct dw_spi *)data; + struct spi_message *message = NULL; + struct spi_transfer *transfer = NULL; + struct spi_transfer *previous = NULL; + struct spi_device *spi = NULL; + struct chip_data *chip = NULL; + u8 bits = 0; + u8 imask = 0; + u8 cs_change = 0; + u16 clk_div = 0; + u32 speed = 0; + u32 cr0 = 0; + + /* Get current state information */ + message = dws->cur_msg; + transfer = dws->cur_transfer; + chip = dws->cur_chip; + spi = message->spi; + + if (message->state == ERROR_STATE) { + message->status = -EIO; + goto early_exit; + } + + /* Handle end of message */ + if (message->state == DONE_STATE) { + message->status = 0; + goto early_exit; + } + + /* Delay if requested at end of transfer*/ + if (message->state == RUNNING_STATE) { + previous = list_entry(transfer->transfer_list.prev, + struct spi_transfer, + transfer_list); + if (previous->delay_usecs) + udelay(previous->delay_usecs); + } + + dws->n_bytes = chip->n_bytes; + dws->dma_width = chip->dma_width; + dws->cs_control = chip->cs_control; + + dws->rx_dma = transfer->rx_dma; + dws->tx_dma = transfer->tx_dma; + dws->tx = (void *)transfer->tx_buf; + dws->tx_end = dws->tx + transfer->len; + dws->rx = transfer->rx_buf; + dws->rx_end = dws->rx + transfer->len; + dws->write = dws->tx ? chip->write : null_writer; + dws->read = dws->rx ? chip->read : null_reader; + dws->cs_change = transfer->cs_change; + dws->len = dws->cur_transfer->len; + if (chip != dws->prev_chip) + cs_change = 1; + + cr0 = chip->cr0; + + /* Handle per transfer options for bpw and speed */ + if (transfer->speed_hz) { + speed = chip->speed_hz; + + if (transfer->speed_hz != speed) { + speed = transfer->speed_hz; + if (speed > dws->max_freq) { + printk(KERN_ERR "MRST SPI0: unsupported" + "freq: %dHz\n", speed); + message->status = -EIO; + goto early_exit; + } + + /* clk_div doesn't support odd number */ + clk_div = dws->max_freq / speed; + clk_div = (clk_div >> 1) << 1; + + chip->speed_hz = speed; + chip->clk_div = clk_div; + } + } + if (transfer->bits_per_word) { + bits = transfer->bits_per_word; + + switch (bits) { + case 8: + dws->n_bytes = 1; + dws->dma_width = 1; + dws->read = (dws->read != null_reader) ? + u8_reader : null_reader; + dws->write = (dws->write != null_writer) ? + u8_writer : null_writer; + break; + case 16: + dws->n_bytes = 2; + dws->dma_width = 2; + dws->read = (dws->read != null_reader) ? + u16_reader : null_reader; + dws->write = (dws->write != null_writer) ? + u16_writer : null_writer; + break; + default: + printk(KERN_ERR "MRST SPI0: unsupported bits:" + "%db\n", bits); + message->status = -EIO; + goto early_exit; + } + + cr0 = (bits - 1) + | (chip->type << SPI_FRF_OFFSET) + | (spi->mode << SPI_MODE_OFFSET) + | (chip->tmode << SPI_TMOD_OFFSET); + } + message->state = RUNNING_STATE; + + /* Check if current transfer is a DMA transaction */ + dws->dma_mapped = map_dma_buffers(dws); + + if (!dws->dma_mapped && !chip->poll_mode) { + if (dws->rx) + imask |= SPI_INT_RXFI; + if (dws->tx) + imask |= SPI_INT_TXEI; + dws->transfer_handler = interrupt_transfer; + } + + /* + * Reprogram registers only if + * 1. chip select changes + * 2. clk_div is changed + * 3. control value changes + */ + if (dw_readw(dws, ctrl0) != cr0 || cs_change || clk_div) { + spi_enable_chip(dws, 0); + + if (dw_readw(dws, ctrl0) != cr0) + dw_writew(dws, ctrl0, cr0); + + /* Set the interrupt mask, for poll mode just diable all int */ + spi_mask_intr(dws, 0xff); + if (!chip->poll_mode) + spi_umask_intr(dws, imask); + + spi_set_clk(dws, clk_div ? clk_div : chip->clk_div); + spi_chip_sel(dws, spi->chip_select); + spi_enable_chip(dws, 1); + + if (cs_change) + dws->prev_chip = chip; + } + + if (dws->dma_mapped) + dma_transfer(dws, cs_change); + + if (chip->poll_mode) + poll_transfer(dws); + + return; + +early_exit: + giveback(dws); + return; +} + +static void pump_messages(struct work_struct *work) +{ + struct dw_spi *dws = + container_of(work, struct dw_spi, pump_messages); + unsigned long flags; + + /* Lock queue and check for queue work */ + spin_lock_irqsave(&dws->lock, flags); + if (list_empty(&dws->queue) || dws->run == QUEUE_STOPPED) { + dws->busy = 0; + spin_unlock_irqrestore(&dws->lock, flags); + return; + } + + /* Make sure we are not already running a message */ + if (dws->cur_msg) { + spin_unlock_irqrestore(&dws->lock, flags); + return; + } + + /* Extract head of queue */ + dws->cur_msg = list_entry(dws->queue.next, struct spi_message, queue); + list_del_init(&dws->cur_msg->queue); + + /* Initial message state*/ + dws->cur_msg->state = START_STATE; + dws->cur_transfer = list_entry(dws->cur_msg->transfers.next, + struct spi_transfer, + transfer_list); + dws->cur_chip = spi_get_ctldata(dws->cur_msg->spi); + + /* Mark as busy and launch transfers */ + tasklet_schedule(&dws->pump_transfers); + + dws->busy = 1; + spin_unlock_irqrestore(&dws->lock, flags); +} + +/* spi_device use this to queue in their spi_msg */ +static int dw_spi_transfer(struct spi_device *spi, struct spi_message *msg) +{ + struct dw_spi *dws = spi_master_get_devdata(spi->master); + unsigned long flags; + + spin_lock_irqsave(&dws->lock, flags); + + if (dws->run == QUEUE_STOPPED) { + spin_unlock_irqrestore(&dws->lock, flags); + return -ESHUTDOWN; + } + + msg->actual_length = 0; + msg->status = -EINPROGRESS; + msg->state = START_STATE; + + list_add_tail(&msg->queue, &dws->queue); + + if (dws->run == QUEUE_RUNNING && !dws->busy) { + + if (dws->cur_transfer || dws->cur_msg) + queue_work(dws->workqueue, + &dws->pump_messages); + else { + /* If no other data transaction in air, just go */ + spin_unlock_irqrestore(&dws->lock, flags); + pump_messages(&dws->pump_messages); + return 0; + } + } + + spin_unlock_irqrestore(&dws->lock, flags); + return 0; +} + +/* This may be called twice for each spi dev */ +static int dw_spi_setup(struct spi_device *spi) +{ + struct dw_spi_chip *chip_info = NULL; + struct chip_data *chip; + + if (spi->bits_per_word != 8 && spi->bits_per_word != 16) + return -EINVAL; + + /* Only alloc on first setup */ + chip = spi_get_ctldata(spi); + if (!chip) { + chip = kzalloc(sizeof(struct chip_data), GFP_KERNEL); + if (!chip) + return -ENOMEM; + + chip->cs_control = null_cs_control; + chip->enable_dma = 0; + } + + /* + * Protocol drivers may change the chip settings, so... + * if chip_info exists, use it + */ + chip_info = spi->controller_data; + + /* chip_info doesn't always exist */ + if (chip_info) { + if (chip_info->cs_control) + chip->cs_control = chip_info->cs_control; + + chip->poll_mode = chip_info->poll_mode; + chip->type = chip_info->type; + + chip->rx_threshold = 0; + chip->tx_threshold = 0; + + chip->enable_dma = chip_info->enable_dma; + } + + if (spi->bits_per_word <= 8) { + chip->n_bytes = 1; + chip->dma_width = 1; + chip->read = u8_reader; + chip->write = u8_writer; + } else if (spi->bits_per_word <= 16) { + chip->n_bytes = 2; + chip->dma_width = 2; + chip->read = u16_reader; + chip->write = u16_writer; + } else { + /* Never take >16b case for MRST SPIC */ + dev_err(&spi->dev, "invalid wordsize\n"); + return -EINVAL; + } + chip->bits_per_word = spi->bits_per_word; + + chip->speed_hz = spi->max_speed_hz; + if (chip->speed_hz) + chip->clk_div = 25000000 / chip->speed_hz; + else + chip->clk_div = 8; /* default value */ + + chip->tmode = 0; /* Tx & Rx */ + /* Default SPI mode is SCPOL = 0, SCPH = 0 */ + chip->cr0 = (chip->bits_per_word - 1) + | (chip->type << SPI_FRF_OFFSET) + | (spi->mode << SPI_MODE_OFFSET) + | (chip->tmode << SPI_TMOD_OFFSET); + + spi_set_ctldata(spi, chip); + return 0; +} + +static void dw_spi_cleanup(struct spi_device *spi) +{ + struct chip_data *chip = spi_get_ctldata(spi); + kfree(chip); +} + +static int __init init_queue(struct dw_spi *dws) +{ + INIT_LIST_HEAD(&dws->queue); + spin_lock_init(&dws->lock); + + dws->run = QUEUE_STOPPED; + dws->busy = 0; + + tasklet_init(&dws->pump_transfers, + pump_transfers, (unsigned long)dws); + + INIT_WORK(&dws->pump_messages, pump_messages); + dws->workqueue = create_singlethread_workqueue( + dev_name(dws->master->dev.parent)); + if (dws->workqueue == NULL) + return -EBUSY; + + return 0; +} + +static int start_queue(struct dw_spi *dws) +{ + unsigned long flags; + + spin_lock_irqsave(&dws->lock, flags); + + if (dws->run == QUEUE_RUNNING || dws->busy) { + spin_unlock_irqrestore(&dws->lock, flags); + return -EBUSY; + } + + dws->run = QUEUE_RUNNING; + dws->cur_msg = NULL; + dws->cur_transfer = NULL; + dws->cur_chip = NULL; + dws->prev_chip = NULL; + spin_unlock_irqrestore(&dws->lock, flags); + + queue_work(dws->workqueue, &dws->pump_messages); + + return 0; +} + +static int stop_queue(struct dw_spi *dws) +{ + unsigned long flags; + unsigned limit = 50; + int status = 0; + + spin_lock_irqsave(&dws->lock, flags); + dws->run = QUEUE_STOPPED; + while (!list_empty(&dws->queue) && dws->busy && limit--) { + spin_unlock_irqrestore(&dws->lock, flags); + msleep(10); + spin_lock_irqsave(&dws->lock, flags); + } + + if (!list_empty(&dws->queue) || dws->busy) + status = -EBUSY; + spin_unlock_irqrestore(&dws->lock, flags); + + return status; +} + +static int destroy_queue(struct dw_spi *dws) +{ + int status; + + status = stop_queue(dws); + if (status != 0) + return status; + destroy_workqueue(dws->workqueue); + return 0; +} + +/* Restart the controller, disable all interrupts, clean rx fifo */ +static void spi_hw_init(struct dw_spi *dws) +{ + spi_enable_chip(dws, 0); + spi_mask_intr(dws, 0xff); + spi_enable_chip(dws, 1); + flush(dws); +} + +int __devinit dw_spi_add_host(struct dw_spi *dws) +{ + struct spi_master *master; + int ret; + + BUG_ON(dws == NULL); + + master = spi_alloc_master(dws->parent_dev, 0); + if (!master) { + ret = -ENOMEM; + goto exit; + } + + dws->master = master; + dws->type = SSI_MOTO_SPI; + dws->prev_chip = NULL; + dws->dma_inited = 0; + dws->dma_addr = (dma_addr_t)(dws->paddr + 0x60); + + ret = request_irq(dws->irq, dw_spi_irq, 0, + "dw_spi", dws); + if (ret < 0) { + dev_err(&master->dev, "can not get IRQ\n"); + goto err_free_master; + } + + master->mode_bits = SPI_CPOL | SPI_CPHA; + master->bus_num = dws->bus_num; + master->num_chipselect = dws->num_cs; + master->cleanup = dw_spi_cleanup; + master->setup = dw_spi_setup; + master->transfer = dw_spi_transfer; + + dws->dma_inited = 0; + + /* Basic HW init */ + spi_hw_init(dws); + + /* Initial and start queue */ + ret = init_queue(dws); + if (ret) { + dev_err(&master->dev, "problem initializing queue\n"); + goto err_diable_hw; + } + ret = start_queue(dws); + if (ret) { + dev_err(&master->dev, "problem starting queue\n"); + goto err_diable_hw; + } + + spi_master_set_devdata(master, dws); + ret = spi_register_master(master); + if (ret) { + dev_err(&master->dev, "problem registering spi master\n"); + goto err_queue_alloc; + } + + mrst_spi_debugfs_init(dws); + return 0; + +err_queue_alloc: + destroy_queue(dws); +err_diable_hw: + spi_enable_chip(dws, 0); + free_irq(dws->irq, dws); +err_free_master: + spi_master_put(master); +exit: + return ret; +} +EXPORT_SYMBOL(dw_spi_add_host); + +void __devexit dw_spi_remove_host(struct dw_spi *dws) +{ + int status = 0; + + if (!dws) + return; + mrst_spi_debugfs_remove(dws); + + /* Remove the queue */ + status = destroy_queue(dws); + if (status != 0) + dev_err(&dws->master->dev, "dw_spi_remove: workqueue will not " + "complete, message memory not freed\n"); + + spi_enable_chip(dws, 0); + /* Disable clk */ + spi_set_clk(dws, 0); + free_irq(dws->irq, dws); + + /* Disconnect from the SPI framework */ + spi_unregister_master(dws->master); +} + +int dw_spi_suspend_host(struct dw_spi *dws) +{ + int ret = 0; + + ret = stop_queue(dws); + if (ret) + return ret; + spi_enable_chip(dws, 0); + spi_set_clk(dws, 0); + return ret; +} +EXPORT_SYMBOL(dw_spi_suspend_host); + +int dw_spi_resume_host(struct dw_spi *dws) +{ + int ret; + + spi_hw_init(dws); + ret = start_queue(dws); + if (ret) + dev_err(&dws->master->dev, "fail to start queue (%d)\n", ret); + return ret; +} +EXPORT_SYMBOL(dw_spi_resume_host); + +MODULE_AUTHOR("Feng Tang <feng.tang@intel.com>"); +MODULE_DESCRIPTION("Driver for DesignWare SPI controller core"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/spi/dw_spi_pci.c b/drivers/spi/dw_spi_pci.c new file mode 100644 index 000000000000..34ba69161734 --- /dev/null +++ b/drivers/spi/dw_spi_pci.c @@ -0,0 +1,169 @@ +/* + * mrst_spi_pci.c - PCI interface driver for DW SPI Core + * + * Copyright (c) 2009, Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, + * Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#include <linux/interrupt.h> +#include <linux/pci.h> +#include <linux/spi/dw_spi.h> +#include <linux/spi/spi.h> + +#define DRIVER_NAME "dw_spi_pci" + +struct dw_spi_pci { + struct pci_dev *pdev; + struct dw_spi dws; +}; + +static int __devinit spi_pci_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct dw_spi_pci *dwpci; + struct dw_spi *dws; + int pci_bar = 0; + int ret; + + printk(KERN_INFO "DW: found PCI SPI controller(ID: %04x:%04x)\n", + pdev->vendor, pdev->device); + + ret = pci_enable_device(pdev); + if (ret) + return ret; + + dwpci = kzalloc(sizeof(struct dw_spi_pci), GFP_KERNEL); + if (!dwpci) { + ret = -ENOMEM; + goto err_disable; + } + + dwpci->pdev = pdev; + dws = &dwpci->dws; + + /* Get basic io resource and map it */ + dws->paddr = pci_resource_start(pdev, pci_bar); + dws->iolen = pci_resource_len(pdev, pci_bar); + + ret = pci_request_region(pdev, pci_bar, dev_name(&pdev->dev)); + if (ret) + goto err_kfree; + + dws->regs = ioremap_nocache((unsigned long)dws->paddr, + pci_resource_len(pdev, pci_bar)); + if (!dws->regs) { + ret = -ENOMEM; + goto err_release_reg; + } + + dws->parent_dev = &pdev->dev; + dws->bus_num = 0; + dws->num_cs = 4; + dws->max_freq = 25000000; /* for Moorestwon */ + dws->irq = pdev->irq; + + ret = dw_spi_add_host(dws); + if (ret) + goto err_unmap; + + /* PCI hook and SPI hook use the same drv data */ + pci_set_drvdata(pdev, dwpci); + return 0; + +err_unmap: + iounmap(dws->regs); +err_release_reg: + pci_release_region(pdev, pci_bar); +err_kfree: + kfree(dwpci); +err_disable: + pci_disable_device(pdev); + return ret; +} + +static void __devexit spi_pci_remove(struct pci_dev *pdev) +{ + struct dw_spi_pci *dwpci = pci_get_drvdata(pdev); + + pci_set_drvdata(pdev, NULL); + iounmap(dwpci->dws.regs); + pci_release_region(pdev, 0); + kfree(dwpci); + pci_disable_device(pdev); +} + +#ifdef CONFIG_PM +static int spi_suspend(struct pci_dev *pdev, pm_message_t state) +{ + struct dw_spi_pci *dwpci = pci_get_drvdata(pdev); + int ret; + + ret = dw_spi_suspend_host(&dwpci->dws); + if (ret) + return ret; + pci_save_state(pdev); + pci_disable_device(pdev); + pci_set_power_state(pdev, pci_choose_state(pdev, state)); + return ret; +} + +static int spi_resume(struct pci_dev *pdev) +{ + struct dw_spi_pci *dwpci = pci_get_drvdata(pdev); + int ret; + + pci_set_power_state(pdev, PCI_D0); + pci_restore_state(pdev); + ret = pci_enable_device(pdev); + if (ret) + return ret; + return dw_spi_resume_host(&dwpci->dws); +} +#else +#define spi_suspend NULL +#define spi_resume NULL +#endif + +static const struct pci_device_id pci_ids[] __devinitdata = { + /* Intel Moorestown platform SPI controller 0 */ + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x0800) }, + {}, +}; + +static struct pci_driver dw_spi_driver = { + .name = DRIVER_NAME, + .id_table = pci_ids, + .probe = spi_pci_probe, + .remove = __devexit_p(spi_pci_remove), + .suspend = spi_suspend, + .resume = spi_resume, +}; + +static int __init mrst_spi_init(void) +{ + return pci_register_driver(&dw_spi_driver); +} + +static void __exit mrst_spi_exit(void) +{ + pci_unregister_driver(&dw_spi_driver); +} + +module_init(mrst_spi_init); +module_exit(mrst_spi_exit); + +MODULE_AUTHOR("Feng Tang <feng.tang@intel.com>"); +MODULE_DESCRIPTION("PCI interface driver for DW SPI Core"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/spi/spi_bfin5xx.c b/drivers/spi/spi_bfin5xx.c index 73e24ef5a2f9..1d41058bbab2 100644 --- a/drivers/spi/spi_bfin5xx.c +++ b/drivers/spi/spi_bfin5xx.c @@ -1294,7 +1294,7 @@ static int __init bfin_spi_probe(struct platform_device *pdev) goto out_error_get_res; } - drv_data->regs_base = ioremap(res->start, (res->end - res->start + 1)); + drv_data->regs_base = ioremap(res->start, resource_size(res)); if (drv_data->regs_base == NULL) { dev_err(dev, "Cannot map IO\n"); status = -ENXIO; diff --git a/drivers/spi/spi_mpc8xxx.c b/drivers/spi/spi_mpc8xxx.c index e9390d747bfc..1fb2a6ea328c 100644 --- a/drivers/spi/spi_mpc8xxx.c +++ b/drivers/spi/spi_mpc8xxx.c @@ -1013,7 +1013,7 @@ mpc8xxx_spi_probe(struct device *dev, struct resource *mem, unsigned int irq) init_completion(&mpc8xxx_spi->done); - mpc8xxx_spi->base = ioremap(mem->start, mem->end - mem->start + 1); + mpc8xxx_spi->base = ioremap(mem->start, resource_size(mem)); if (mpc8xxx_spi->base == NULL) { ret = -ENOMEM; goto err_ioremap; diff --git a/drivers/spi/spi_s3c24xx.c b/drivers/spi/spi_s3c24xx.c index 276591569c8b..c010733877ae 100644 --- a/drivers/spi/spi_s3c24xx.c +++ b/drivers/spi/spi_s3c24xx.c @@ -1,7 +1,7 @@ /* linux/drivers/spi/spi_s3c24xx.c * * Copyright (c) 2006 Ben Dooks - * Copyright (c) 2006 Simtec Electronics + * Copyright 2006-2009 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * * This program is free software; you can redistribute it and/or modify @@ -28,6 +28,11 @@ #include <plat/regs-spi.h> #include <mach/spi.h> +#include <plat/fiq.h> +#include <asm/fiq.h> + +#include "spi_s3c24xx_fiq.h" + /** * s3c24xx_spi_devstate - per device data * @hz: Last frequency calculated for @sppre field. @@ -42,6 +47,13 @@ struct s3c24xx_spi_devstate { u8 sppre; }; +enum spi_fiq_mode { + FIQ_MODE_NONE = 0, + FIQ_MODE_TX = 1, + FIQ_MODE_RX = 2, + FIQ_MODE_TXRX = 3, +}; + struct s3c24xx_spi { /* bitbang has to be first */ struct spi_bitbang bitbang; @@ -52,6 +64,11 @@ struct s3c24xx_spi { int len; int count; + struct fiq_handler fiq_handler; + enum spi_fiq_mode fiq_mode; + unsigned char fiq_inuse; + unsigned char fiq_claimed; + void (*set_cs)(struct s3c2410_spi_info *spi, int cs, int pol); @@ -67,6 +84,7 @@ struct s3c24xx_spi { struct s3c2410_spi_info *pdata; }; + #define SPCON_DEFAULT (S3C2410_SPCON_MSTR | S3C2410_SPCON_SMOD_INT) #define SPPIN_DEFAULT (S3C2410_SPPIN_KEEP) @@ -127,7 +145,7 @@ static int s3c24xx_spi_update_state(struct spi_device *spi, } if (spi->mode != cs->mode) { - u8 spcon = SPCON_DEFAULT; + u8 spcon = SPCON_DEFAULT | S3C2410_SPCON_ENSCK; if (spi->mode & SPI_CPHA) spcon |= S3C2410_SPCON_CPHA_FMTB; @@ -214,13 +232,196 @@ static inline unsigned int hw_txbyte(struct s3c24xx_spi *hw, int count) return hw->tx ? hw->tx[count] : 0; } +#ifdef CONFIG_SPI_S3C24XX_FIQ +/* Support for FIQ based pseudo-DMA to improve the transfer speed. + * + * This code uses the assembly helper in spi_s3c24xx_spi.S which is + * used by the FIQ core to move data between main memory and the peripheral + * block. Since this is code running on the processor, there is no problem + * with cache coherency of the buffers, so we can use any buffer we like. + */ + +/** + * struct spi_fiq_code - FIQ code and header + * @length: The length of the code fragment, excluding this header. + * @ack_offset: The offset from @data to the word to place the IRQ ACK bit at. + * @data: The code itself to install as a FIQ handler. + */ +struct spi_fiq_code { + u32 length; + u32 ack_offset; + u8 data[0]; +}; + +extern struct spi_fiq_code s3c24xx_spi_fiq_txrx; +extern struct spi_fiq_code s3c24xx_spi_fiq_tx; +extern struct spi_fiq_code s3c24xx_spi_fiq_rx; + +/** + * ack_bit - turn IRQ into IRQ acknowledgement bit + * @irq: The interrupt number + * + * Returns the bit to write to the interrupt acknowledge register. + */ +static inline u32 ack_bit(unsigned int irq) +{ + return 1 << (irq - IRQ_EINT0); +} + +/** + * s3c24xx_spi_tryfiq - attempt to claim and setup FIQ for transfer + * @hw: The hardware state. + * + * Claim the FIQ handler (only one can be active at any one time) and + * then setup the correct transfer code for this transfer. + * + * This call updates all the necessary state information if sucessful, + * so the caller does not need to do anything more than start the transfer + * as normal, since the IRQ will have been re-routed to the FIQ handler. +*/ +void s3c24xx_spi_tryfiq(struct s3c24xx_spi *hw) +{ + struct pt_regs regs; + enum spi_fiq_mode mode; + struct spi_fiq_code *code; + int ret; + + if (!hw->fiq_claimed) { + /* try and claim fiq if we haven't got it, and if not + * then return and simply use another transfer method */ + + ret = claim_fiq(&hw->fiq_handler); + if (ret) + return; + } + + if (hw->tx && !hw->rx) + mode = FIQ_MODE_TX; + else if (hw->rx && !hw->tx) + mode = FIQ_MODE_RX; + else + mode = FIQ_MODE_TXRX; + + regs.uregs[fiq_rspi] = (long)hw->regs; + regs.uregs[fiq_rrx] = (long)hw->rx; + regs.uregs[fiq_rtx] = (long)hw->tx + 1; + regs.uregs[fiq_rcount] = hw->len - 1; + regs.uregs[fiq_rirq] = (long)S3C24XX_VA_IRQ; + + set_fiq_regs(®s); + + if (hw->fiq_mode != mode) { + u32 *ack_ptr; + + hw->fiq_mode = mode; + + switch (mode) { + case FIQ_MODE_TX: + code = &s3c24xx_spi_fiq_tx; + break; + case FIQ_MODE_RX: + code = &s3c24xx_spi_fiq_rx; + break; + case FIQ_MODE_TXRX: + code = &s3c24xx_spi_fiq_txrx; + break; + default: + code = NULL; + } + + BUG_ON(!code); + + ack_ptr = (u32 *)&code->data[code->ack_offset]; + *ack_ptr = ack_bit(hw->irq); + + set_fiq_handler(&code->data, code->length); + } + + s3c24xx_set_fiq(hw->irq, true); + + hw->fiq_mode = mode; + hw->fiq_inuse = 1; +} + +/** + * s3c24xx_spi_fiqop - FIQ core code callback + * @pw: Data registered with the handler + * @release: Whether this is a release or a return. + * + * Called by the FIQ code when another module wants to use the FIQ, so + * return whether we are currently using this or not and then update our + * internal state. + */ +static int s3c24xx_spi_fiqop(void *pw, int release) +{ + struct s3c24xx_spi *hw = pw; + int ret = 0; + + if (release) { + if (hw->fiq_inuse) + ret = -EBUSY; + + /* note, we do not need to unroute the FIQ, as the FIQ + * vector code de-routes it to signal the end of transfer */ + + hw->fiq_mode = FIQ_MODE_NONE; + hw->fiq_claimed = 0; + } else { + hw->fiq_claimed = 1; + } + + return ret; +} + +/** + * s3c24xx_spi_initfiq - setup the information for the FIQ core + * @hw: The hardware state. + * + * Setup the fiq_handler block to pass to the FIQ core. + */ +static inline void s3c24xx_spi_initfiq(struct s3c24xx_spi *hw) +{ + hw->fiq_handler.dev_id = hw; + hw->fiq_handler.name = dev_name(hw->dev); + hw->fiq_handler.fiq_op = s3c24xx_spi_fiqop; +} + +/** + * s3c24xx_spi_usefiq - return if we should be using FIQ. + * @hw: The hardware state. + * + * Return true if the platform data specifies whether this channel is + * allowed to use the FIQ. + */ +static inline bool s3c24xx_spi_usefiq(struct s3c24xx_spi *hw) +{ + return hw->pdata->use_fiq; +} + +/** + * s3c24xx_spi_usingfiq - return if channel is using FIQ + * @spi: The hardware state. + * + * Return whether the channel is currently using the FIQ (separate from + * whether the FIQ is claimed). + */ +static inline bool s3c24xx_spi_usingfiq(struct s3c24xx_spi *spi) +{ + return spi->fiq_inuse; +} +#else + +static inline void s3c24xx_spi_initfiq(struct s3c24xx_spi *s) { } +static inline void s3c24xx_spi_tryfiq(struct s3c24xx_spi *s) { } +static inline bool s3c24xx_spi_usefiq(struct s3c24xx_spi *s) { return false; } +static inline bool s3c24xx_spi_usingfiq(struct s3c24xx_spi *s) { return false; } + +#endif /* CONFIG_SPI_S3C24XX_FIQ */ + static int s3c24xx_spi_txrx(struct spi_device *spi, struct spi_transfer *t) { struct s3c24xx_spi *hw = to_hw(spi); - dev_dbg(&spi->dev, "txrx: tx %p, rx %p, len %d\n", - t->tx_buf, t->rx_buf, t->len); - hw->tx = t->tx_buf; hw->rx = t->rx_buf; hw->len = t->len; @@ -228,11 +429,14 @@ static int s3c24xx_spi_txrx(struct spi_device *spi, struct spi_transfer *t) init_completion(&hw->done); + hw->fiq_inuse = 0; + if (s3c24xx_spi_usefiq(hw) && t->len >= 3) + s3c24xx_spi_tryfiq(hw); + /* send the first byte */ writeb(hw_txbyte(hw, 0), hw->regs + S3C2410_SPTDAT); wait_for_completion(&hw->done); - return hw->count; } @@ -254,17 +458,27 @@ static irqreturn_t s3c24xx_spi_irq(int irq, void *dev) goto irq_done; } - hw->count++; + if (!s3c24xx_spi_usingfiq(hw)) { + hw->count++; - if (hw->rx) - hw->rx[count] = readb(hw->regs + S3C2410_SPRDAT); + if (hw->rx) + hw->rx[count] = readb(hw->regs + S3C2410_SPRDAT); - count++; + count++; + + if (count < hw->len) + writeb(hw_txbyte(hw, count), hw->regs + S3C2410_SPTDAT); + else + complete(&hw->done); + } else { + hw->count = hw->len; + hw->fiq_inuse = 0; + + if (hw->rx) + hw->rx[hw->len-1] = readb(hw->regs + S3C2410_SPRDAT); - if (count < hw->len) - writeb(hw_txbyte(hw, count), hw->regs + S3C2410_SPTDAT); - else complete(&hw->done); + } irq_done: return IRQ_HANDLED; @@ -322,6 +536,10 @@ static int __init s3c24xx_spi_probe(struct platform_device *pdev) platform_set_drvdata(pdev, hw); init_completion(&hw->done); + /* initialise fiq handler */ + + s3c24xx_spi_initfiq(hw); + /* setup the master state. */ /* the spi->mode bits understood by this driver: */ diff --git a/drivers/spi/spi_s3c24xx_fiq.S b/drivers/spi/spi_s3c24xx_fiq.S new file mode 100644 index 000000000000..3793cae361db --- /dev/null +++ b/drivers/spi/spi_s3c24xx_fiq.S @@ -0,0 +1,116 @@ +/* linux/drivers/spi/spi_s3c24xx_fiq.S + * + * Copyright 2009 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * S3C24XX SPI - FIQ pseudo-DMA transfer code + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/linkage.h> +#include <asm/assembler.h> + +#include <mach/map.h> +#include <mach/regs-irq.h> +#include <plat/regs-spi.h> + +#include "spi_s3c24xx_fiq.h" + + .text + + @ entry to these routines is as follows, with the register names + @ defined in fiq.h so that they can be shared with the C files which + @ setup the calling registers. + @ + @ fiq_rirq The base of the IRQ registers to find S3C2410_SRCPND + @ fiq_rtmp Temporary register to hold tx/rx data + @ fiq_rspi The base of the SPI register block + @ fiq_rtx The tx buffer pointer + @ fiq_rrx The rx buffer pointer + @ fiq_rcount The number of bytes to move + + @ each entry starts with a word entry of how long it is + @ and an offset to the irq acknowledgment word + +ENTRY(s3c24xx_spi_fiq_rx) +s3c24xx_spi_fix_rx: + .word fiq_rx_end - fiq_rx_start + .word fiq_rx_irq_ack - fiq_rx_start +fiq_rx_start: + ldr fiq_rtmp, fiq_rx_irq_ack + str fiq_rtmp, [ fiq_rirq, # S3C2410_SRCPND - S3C24XX_VA_IRQ ] + + ldrb fiq_rtmp, [ fiq_rspi, # S3C2410_SPRDAT ] + strb fiq_rtmp, [ fiq_rrx ], #1 + + mov fiq_rtmp, #0xff + strb fiq_rtmp, [ fiq_rspi, # S3C2410_SPTDAT ] + + subs fiq_rcount, fiq_rcount, #1 + subnes pc, lr, #4 @@ return, still have work to do + + @@ set IRQ controller so that next op will trigger IRQ + mov fiq_rtmp, #0 + str fiq_rtmp, [ fiq_rirq, # S3C2410_INTMOD - S3C24XX_VA_IRQ ] + subs pc, lr, #4 + +fiq_rx_irq_ack: + .word 0 +fiq_rx_end: + +ENTRY(s3c24xx_spi_fiq_txrx) +s3c24xx_spi_fiq_txrx: + .word fiq_txrx_end - fiq_txrx_start + .word fiq_txrx_irq_ack - fiq_txrx_start +fiq_txrx_start: + + ldrb fiq_rtmp, [ fiq_rspi, # S3C2410_SPRDAT ] + strb fiq_rtmp, [ fiq_rrx ], #1 + + ldr fiq_rtmp, fiq_txrx_irq_ack + str fiq_rtmp, [ fiq_rirq, # S3C2410_SRCPND - S3C24XX_VA_IRQ ] + + ldrb fiq_rtmp, [ fiq_rtx ], #1 + strb fiq_rtmp, [ fiq_rspi, # S3C2410_SPTDAT ] + + subs fiq_rcount, fiq_rcount, #1 + subnes pc, lr, #4 @@ return, still have work to do + + mov fiq_rtmp, #0 + str fiq_rtmp, [ fiq_rirq, # S3C2410_INTMOD - S3C24XX_VA_IRQ ] + subs pc, lr, #4 + +fiq_txrx_irq_ack: + .word 0 + +fiq_txrx_end: + +ENTRY(s3c24xx_spi_fiq_tx) +s3c24xx_spi_fix_tx: + .word fiq_tx_end - fiq_tx_start + .word fiq_tx_irq_ack - fiq_tx_start +fiq_tx_start: + ldrb fiq_rtmp, [ fiq_rspi, # S3C2410_SPRDAT ] + + ldr fiq_rtmp, fiq_tx_irq_ack + str fiq_rtmp, [ fiq_rirq, # S3C2410_SRCPND - S3C24XX_VA_IRQ ] + + ldrb fiq_rtmp, [ fiq_rtx ], #1 + strb fiq_rtmp, [ fiq_rspi, # S3C2410_SPTDAT ] + + subs fiq_rcount, fiq_rcount, #1 + subnes pc, lr, #4 @@ return, still have work to do + + mov fiq_rtmp, #0 + str fiq_rtmp, [ fiq_rirq, # S3C2410_INTMOD - S3C24XX_VA_IRQ ] + subs pc, lr, #4 + +fiq_tx_irq_ack: + .word 0 + +fiq_tx_end: + + .end diff --git a/drivers/spi/spi_s3c24xx_fiq.h b/drivers/spi/spi_s3c24xx_fiq.h new file mode 100644 index 000000000000..a5950bb25b51 --- /dev/null +++ b/drivers/spi/spi_s3c24xx_fiq.h @@ -0,0 +1,26 @@ +/* linux/drivers/spi/spi_s3c24xx_fiq.h + * + * Copyright 2009 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * S3C24XX SPI - FIQ pseudo-DMA transfer support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/* We have R8 through R13 to play with */ + +#ifdef __ASSEMBLY__ +#define __REG_NR(x) r##x +#else +#define __REG_NR(x) (x) +#endif + +#define fiq_rspi __REG_NR(8) +#define fiq_rtmp __REG_NR(9) +#define fiq_rrx __REG_NR(10) +#define fiq_rtx __REG_NR(11) +#define fiq_rcount __REG_NR(12) +#define fiq_rirq __REG_NR(13) diff --git a/drivers/spi/spi_s3c64xx.c b/drivers/spi/spi_s3c64xx.c new file mode 100644 index 000000000000..88a456dba967 --- /dev/null +++ b/drivers/spi/spi_s3c64xx.c @@ -0,0 +1,1196 @@ +/* linux/drivers/spi/spi_s3c64xx.c + * + * Copyright (C) 2009 Samsung Electronics Ltd. + * Jaswinder Singh <jassi.brar@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/workqueue.h> +#include <linux/delay.h> +#include <linux/clk.h> +#include <linux/dma-mapping.h> +#include <linux/platform_device.h> +#include <linux/spi/spi.h> + +#include <mach/dma.h> +#include <plat/spi.h> + +/* Registers and bit-fields */ + +#define S3C64XX_SPI_CH_CFG 0x00 +#define S3C64XX_SPI_CLK_CFG 0x04 +#define S3C64XX_SPI_MODE_CFG 0x08 +#define S3C64XX_SPI_SLAVE_SEL 0x0C +#define S3C64XX_SPI_INT_EN 0x10 +#define S3C64XX_SPI_STATUS 0x14 +#define S3C64XX_SPI_TX_DATA 0x18 +#define S3C64XX_SPI_RX_DATA 0x1C +#define S3C64XX_SPI_PACKET_CNT 0x20 +#define S3C64XX_SPI_PENDING_CLR 0x24 +#define S3C64XX_SPI_SWAP_CFG 0x28 +#define S3C64XX_SPI_FB_CLK 0x2C + +#define S3C64XX_SPI_CH_HS_EN (1<<6) /* High Speed Enable */ +#define S3C64XX_SPI_CH_SW_RST (1<<5) +#define S3C64XX_SPI_CH_SLAVE (1<<4) +#define S3C64XX_SPI_CPOL_L (1<<3) +#define S3C64XX_SPI_CPHA_B (1<<2) +#define S3C64XX_SPI_CH_RXCH_ON (1<<1) +#define S3C64XX_SPI_CH_TXCH_ON (1<<0) + +#define S3C64XX_SPI_CLKSEL_SRCMSK (3<<9) +#define S3C64XX_SPI_CLKSEL_SRCSHFT 9 +#define S3C64XX_SPI_ENCLK_ENABLE (1<<8) +#define S3C64XX_SPI_PSR_MASK 0xff + +#define S3C64XX_SPI_MODE_CH_TSZ_BYTE (0<<29) +#define S3C64XX_SPI_MODE_CH_TSZ_HALFWORD (1<<29) +#define S3C64XX_SPI_MODE_CH_TSZ_WORD (2<<29) +#define S3C64XX_SPI_MODE_CH_TSZ_MASK (3<<29) +#define S3C64XX_SPI_MODE_BUS_TSZ_BYTE (0<<17) +#define S3C64XX_SPI_MODE_BUS_TSZ_HALFWORD (1<<17) +#define S3C64XX_SPI_MODE_BUS_TSZ_WORD (2<<17) +#define S3C64XX_SPI_MODE_BUS_TSZ_MASK (3<<17) +#define S3C64XX_SPI_MODE_RXDMA_ON (1<<2) +#define S3C64XX_SPI_MODE_TXDMA_ON (1<<1) +#define S3C64XX_SPI_MODE_4BURST (1<<0) + +#define S3C64XX_SPI_SLAVE_AUTO (1<<1) +#define S3C64XX_SPI_SLAVE_SIG_INACT (1<<0) + +#define S3C64XX_SPI_ACT(c) writel(0, (c)->regs + S3C64XX_SPI_SLAVE_SEL) + +#define S3C64XX_SPI_DEACT(c) writel(S3C64XX_SPI_SLAVE_SIG_INACT, \ + (c)->regs + S3C64XX_SPI_SLAVE_SEL) + +#define S3C64XX_SPI_INT_TRAILING_EN (1<<6) +#define S3C64XX_SPI_INT_RX_OVERRUN_EN (1<<5) +#define S3C64XX_SPI_INT_RX_UNDERRUN_EN (1<<4) +#define S3C64XX_SPI_INT_TX_OVERRUN_EN (1<<3) +#define S3C64XX_SPI_INT_TX_UNDERRUN_EN (1<<2) +#define S3C64XX_SPI_INT_RX_FIFORDY_EN (1<<1) +#define S3C64XX_SPI_INT_TX_FIFORDY_EN (1<<0) + +#define S3C64XX_SPI_ST_RX_OVERRUN_ERR (1<<5) +#define S3C64XX_SPI_ST_RX_UNDERRUN_ERR (1<<4) +#define S3C64XX_SPI_ST_TX_OVERRUN_ERR (1<<3) +#define S3C64XX_SPI_ST_TX_UNDERRUN_ERR (1<<2) +#define S3C64XX_SPI_ST_RX_FIFORDY (1<<1) +#define S3C64XX_SPI_ST_TX_FIFORDY (1<<0) + +#define S3C64XX_SPI_PACKET_CNT_EN (1<<16) + +#define S3C64XX_SPI_PND_TX_UNDERRUN_CLR (1<<4) +#define S3C64XX_SPI_PND_TX_OVERRUN_CLR (1<<3) +#define S3C64XX_SPI_PND_RX_UNDERRUN_CLR (1<<2) +#define S3C64XX_SPI_PND_RX_OVERRUN_CLR (1<<1) +#define S3C64XX_SPI_PND_TRAILING_CLR (1<<0) + +#define S3C64XX_SPI_SWAP_RX_HALF_WORD (1<<7) +#define S3C64XX_SPI_SWAP_RX_BYTE (1<<6) +#define S3C64XX_SPI_SWAP_RX_BIT (1<<5) +#define S3C64XX_SPI_SWAP_RX_EN (1<<4) +#define S3C64XX_SPI_SWAP_TX_HALF_WORD (1<<3) +#define S3C64XX_SPI_SWAP_TX_BYTE (1<<2) +#define S3C64XX_SPI_SWAP_TX_BIT (1<<1) +#define S3C64XX_SPI_SWAP_TX_EN (1<<0) + +#define S3C64XX_SPI_FBCLK_MSK (3<<0) + +#define S3C64XX_SPI_ST_TRLCNTZ(v, i) ((((v) >> (i)->rx_lvl_offset) & \ + (((i)->fifo_lvl_mask + 1))) \ + ? 1 : 0) + +#define S3C64XX_SPI_ST_TX_DONE(v, i) ((((v) >> (i)->rx_lvl_offset) & \ + (((i)->fifo_lvl_mask + 1) << 1)) \ + ? 1 : 0) +#define TX_FIFO_LVL(v, i) (((v) >> 6) & (i)->fifo_lvl_mask) +#define RX_FIFO_LVL(v, i) (((v) >> (i)->rx_lvl_offset) & (i)->fifo_lvl_mask) + +#define S3C64XX_SPI_MAX_TRAILCNT 0x3ff +#define S3C64XX_SPI_TRAILCNT_OFF 19 + +#define S3C64XX_SPI_TRAILCNT S3C64XX_SPI_MAX_TRAILCNT + +#define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t) + +#define SUSPND (1<<0) +#define SPIBUSY (1<<1) +#define RXBUSY (1<<2) +#define TXBUSY (1<<3) + +/** + * struct s3c64xx_spi_driver_data - Runtime info holder for SPI driver. + * @clk: Pointer to the spi clock. + * @master: Pointer to the SPI Protocol master. + * @workqueue: Work queue for the SPI xfer requests. + * @cntrlr_info: Platform specific data for the controller this driver manages. + * @tgl_spi: Pointer to the last CS left untoggled by the cs_change hint. + * @work: Work + * @queue: To log SPI xfer requests. + * @lock: Controller specific lock. + * @state: Set of FLAGS to indicate status. + * @rx_dmach: Controller's DMA channel for Rx. + * @tx_dmach: Controller's DMA channel for Tx. + * @sfr_start: BUS address of SPI controller regs. + * @regs: Pointer to ioremap'ed controller registers. + * @xfer_completion: To indicate completion of xfer task. + * @cur_mode: Stores the active configuration of the controller. + * @cur_bpw: Stores the active bits per word settings. + * @cur_speed: Stores the active xfer clock speed. + */ +struct s3c64xx_spi_driver_data { + void __iomem *regs; + struct clk *clk; + struct platform_device *pdev; + struct spi_master *master; + struct workqueue_struct *workqueue; + struct s3c64xx_spi_cntrlr_info *cntrlr_info; + struct spi_device *tgl_spi; + struct work_struct work; + struct list_head queue; + spinlock_t lock; + enum dma_ch rx_dmach; + enum dma_ch tx_dmach; + unsigned long sfr_start; + struct completion xfer_completion; + unsigned state; + unsigned cur_mode, cur_bpw; + unsigned cur_speed; +}; + +static struct s3c2410_dma_client s3c64xx_spi_dma_client = { + .name = "samsung-spi-dma", +}; + +static void flush_fifo(struct s3c64xx_spi_driver_data *sdd) +{ + struct s3c64xx_spi_cntrlr_info *sci = sdd->cntrlr_info; + void __iomem *regs = sdd->regs; + unsigned long loops; + u32 val; + + writel(0, regs + S3C64XX_SPI_PACKET_CNT); + + val = readl(regs + S3C64XX_SPI_CH_CFG); + val |= S3C64XX_SPI_CH_SW_RST; + val &= ~S3C64XX_SPI_CH_HS_EN; + writel(val, regs + S3C64XX_SPI_CH_CFG); + + /* Flush TxFIFO*/ + loops = msecs_to_loops(1); + do { + val = readl(regs + S3C64XX_SPI_STATUS); + } while (TX_FIFO_LVL(val, sci) && loops--); + + /* Flush RxFIFO*/ + loops = msecs_to_loops(1); + do { + val = readl(regs + S3C64XX_SPI_STATUS); + if (RX_FIFO_LVL(val, sci)) + readl(regs + S3C64XX_SPI_RX_DATA); + else + break; + } while (loops--); + + val = readl(regs + S3C64XX_SPI_CH_CFG); + val &= ~S3C64XX_SPI_CH_SW_RST; + writel(val, regs + S3C64XX_SPI_CH_CFG); + + val = readl(regs + S3C64XX_SPI_MODE_CFG); + val &= ~(S3C64XX_SPI_MODE_TXDMA_ON | S3C64XX_SPI_MODE_RXDMA_ON); + writel(val, regs + S3C64XX_SPI_MODE_CFG); + + val = readl(regs + S3C64XX_SPI_CH_CFG); + val &= ~(S3C64XX_SPI_CH_RXCH_ON | S3C64XX_SPI_CH_TXCH_ON); + writel(val, regs + S3C64XX_SPI_CH_CFG); +} + +static void enable_datapath(struct s3c64xx_spi_driver_data *sdd, + struct spi_device *spi, + struct spi_transfer *xfer, int dma_mode) +{ + struct s3c64xx_spi_cntrlr_info *sci = sdd->cntrlr_info; + void __iomem *regs = sdd->regs; + u32 modecfg, chcfg; + + modecfg = readl(regs + S3C64XX_SPI_MODE_CFG); + modecfg &= ~(S3C64XX_SPI_MODE_TXDMA_ON | S3C64XX_SPI_MODE_RXDMA_ON); + + chcfg = readl(regs + S3C64XX_SPI_CH_CFG); + chcfg &= ~S3C64XX_SPI_CH_TXCH_ON; + + if (dma_mode) { + chcfg &= ~S3C64XX_SPI_CH_RXCH_ON; + } else { + /* Always shift in data in FIFO, even if xfer is Tx only, + * this helps setting PCKT_CNT value for generating clocks + * as exactly needed. + */ + chcfg |= S3C64XX_SPI_CH_RXCH_ON; + writel(((xfer->len * 8 / sdd->cur_bpw) & 0xffff) + | S3C64XX_SPI_PACKET_CNT_EN, + regs + S3C64XX_SPI_PACKET_CNT); + } + + if (xfer->tx_buf != NULL) { + sdd->state |= TXBUSY; + chcfg |= S3C64XX_SPI_CH_TXCH_ON; + if (dma_mode) { + modecfg |= S3C64XX_SPI_MODE_TXDMA_ON; + s3c2410_dma_config(sdd->tx_dmach, 1); + s3c2410_dma_enqueue(sdd->tx_dmach, (void *)sdd, + xfer->tx_dma, xfer->len); + s3c2410_dma_ctrl(sdd->tx_dmach, S3C2410_DMAOP_START); + } else { + unsigned char *buf = (unsigned char *) xfer->tx_buf; + int i = 0; + while (i < xfer->len) + writeb(buf[i++], regs + S3C64XX_SPI_TX_DATA); + } + } + + if (xfer->rx_buf != NULL) { + sdd->state |= RXBUSY; + + if (sci->high_speed && sdd->cur_speed >= 30000000UL + && !(sdd->cur_mode & SPI_CPHA)) + chcfg |= S3C64XX_SPI_CH_HS_EN; + + if (dma_mode) { + modecfg |= S3C64XX_SPI_MODE_RXDMA_ON; + chcfg |= S3C64XX_SPI_CH_RXCH_ON; + writel(((xfer->len * 8 / sdd->cur_bpw) & 0xffff) + | S3C64XX_SPI_PACKET_CNT_EN, + regs + S3C64XX_SPI_PACKET_CNT); + s3c2410_dma_config(sdd->rx_dmach, 1); + s3c2410_dma_enqueue(sdd->rx_dmach, (void *)sdd, + xfer->rx_dma, xfer->len); + s3c2410_dma_ctrl(sdd->rx_dmach, S3C2410_DMAOP_START); + } + } + + writel(modecfg, regs + S3C64XX_SPI_MODE_CFG); + writel(chcfg, regs + S3C64XX_SPI_CH_CFG); +} + +static inline void enable_cs(struct s3c64xx_spi_driver_data *sdd, + struct spi_device *spi) +{ + struct s3c64xx_spi_csinfo *cs; + + if (sdd->tgl_spi != NULL) { /* If last device toggled after mssg */ + if (sdd->tgl_spi != spi) { /* if last mssg on diff device */ + /* Deselect the last toggled device */ + cs = sdd->tgl_spi->controller_data; + cs->set_level(spi->mode & SPI_CS_HIGH ? 0 : 1); + } + sdd->tgl_spi = NULL; + } + + cs = spi->controller_data; + cs->set_level(spi->mode & SPI_CS_HIGH ? 1 : 0); +} + +static int wait_for_xfer(struct s3c64xx_spi_driver_data *sdd, + struct spi_transfer *xfer, int dma_mode) +{ + struct s3c64xx_spi_cntrlr_info *sci = sdd->cntrlr_info; + void __iomem *regs = sdd->regs; + unsigned long val; + int ms; + + /* millisecs to xfer 'len' bytes @ 'cur_speed' */ + ms = xfer->len * 8 * 1000 / sdd->cur_speed; + ms += 5; /* some tolerance */ + + if (dma_mode) { + val = msecs_to_jiffies(ms) + 10; + val = wait_for_completion_timeout(&sdd->xfer_completion, val); + } else { + val = msecs_to_loops(ms); + do { + val = readl(regs + S3C64XX_SPI_STATUS); + } while (RX_FIFO_LVL(val, sci) < xfer->len && --val); + } + + if (!val) + return -EIO; + + if (dma_mode) { + u32 status; + + /* + * DmaTx returns after simply writing data in the FIFO, + * w/o waiting for real transmission on the bus to finish. + * DmaRx returns only after Dma read data from FIFO which + * needs bus transmission to finish, so we don't worry if + * Xfer involved Rx(with or without Tx). + */ + if (xfer->rx_buf == NULL) { + val = msecs_to_loops(10); + status = readl(regs + S3C64XX_SPI_STATUS); + while ((TX_FIFO_LVL(status, sci) + || !S3C64XX_SPI_ST_TX_DONE(status, sci)) + && --val) { + cpu_relax(); + status = readl(regs + S3C64XX_SPI_STATUS); + } + + if (!val) + return -EIO; + } + } else { + unsigned char *buf; + int i; + + /* If it was only Tx */ + if (xfer->rx_buf == NULL) { + sdd->state &= ~TXBUSY; + return 0; + } + + i = 0; + buf = xfer->rx_buf; + while (i < xfer->len) + buf[i++] = readb(regs + S3C64XX_SPI_RX_DATA); + + sdd->state &= ~RXBUSY; + } + + return 0; +} + +static inline void disable_cs(struct s3c64xx_spi_driver_data *sdd, + struct spi_device *spi) +{ + struct s3c64xx_spi_csinfo *cs = spi->controller_data; + + if (sdd->tgl_spi == spi) + sdd->tgl_spi = NULL; + + cs->set_level(spi->mode & SPI_CS_HIGH ? 0 : 1); +} + +static void s3c64xx_spi_config(struct s3c64xx_spi_driver_data *sdd) +{ + struct s3c64xx_spi_cntrlr_info *sci = sdd->cntrlr_info; + void __iomem *regs = sdd->regs; + u32 val; + + /* Disable Clock */ + val = readl(regs + S3C64XX_SPI_CLK_CFG); + val &= ~S3C64XX_SPI_ENCLK_ENABLE; + writel(val, regs + S3C64XX_SPI_CLK_CFG); + + /* Set Polarity and Phase */ + val = readl(regs + S3C64XX_SPI_CH_CFG); + val &= ~(S3C64XX_SPI_CH_SLAVE | + S3C64XX_SPI_CPOL_L | + S3C64XX_SPI_CPHA_B); + + if (sdd->cur_mode & SPI_CPOL) + val |= S3C64XX_SPI_CPOL_L; + + if (sdd->cur_mode & SPI_CPHA) + val |= S3C64XX_SPI_CPHA_B; + + writel(val, regs + S3C64XX_SPI_CH_CFG); + + /* Set Channel & DMA Mode */ + val = readl(regs + S3C64XX_SPI_MODE_CFG); + val &= ~(S3C64XX_SPI_MODE_BUS_TSZ_MASK + | S3C64XX_SPI_MODE_CH_TSZ_MASK); + + switch (sdd->cur_bpw) { + case 32: + val |= S3C64XX_SPI_MODE_BUS_TSZ_WORD; + break; + case 16: + val |= S3C64XX_SPI_MODE_BUS_TSZ_HALFWORD; + break; + default: + val |= S3C64XX_SPI_MODE_BUS_TSZ_BYTE; + break; + } + val |= S3C64XX_SPI_MODE_CH_TSZ_BYTE; /* Always 8bits wide */ + + writel(val, regs + S3C64XX_SPI_MODE_CFG); + + /* Configure Clock */ + val = readl(regs + S3C64XX_SPI_CLK_CFG); + val &= ~S3C64XX_SPI_PSR_MASK; + val |= ((clk_get_rate(sci->src_clk) / sdd->cur_speed / 2 - 1) + & S3C64XX_SPI_PSR_MASK); + writel(val, regs + S3C64XX_SPI_CLK_CFG); + + /* Enable Clock */ + val = readl(regs + S3C64XX_SPI_CLK_CFG); + val |= S3C64XX_SPI_ENCLK_ENABLE; + writel(val, regs + S3C64XX_SPI_CLK_CFG); +} + +void s3c64xx_spi_dma_rxcb(struct s3c2410_dma_chan *chan, void *buf_id, + int size, enum s3c2410_dma_buffresult res) +{ + struct s3c64xx_spi_driver_data *sdd = buf_id; + unsigned long flags; + + spin_lock_irqsave(&sdd->lock, flags); + + if (res == S3C2410_RES_OK) + sdd->state &= ~RXBUSY; + else + dev_err(&sdd->pdev->dev, "DmaAbrtRx-%d\n", size); + + /* If the other done */ + if (!(sdd->state & TXBUSY)) + complete(&sdd->xfer_completion); + + spin_unlock_irqrestore(&sdd->lock, flags); +} + +void s3c64xx_spi_dma_txcb(struct s3c2410_dma_chan *chan, void *buf_id, + int size, enum s3c2410_dma_buffresult res) +{ + struct s3c64xx_spi_driver_data *sdd = buf_id; + unsigned long flags; + + spin_lock_irqsave(&sdd->lock, flags); + + if (res == S3C2410_RES_OK) + sdd->state &= ~TXBUSY; + else + dev_err(&sdd->pdev->dev, "DmaAbrtTx-%d \n", size); + + /* If the other done */ + if (!(sdd->state & RXBUSY)) + complete(&sdd->xfer_completion); + + spin_unlock_irqrestore(&sdd->lock, flags); +} + +#define XFER_DMAADDR_INVALID DMA_BIT_MASK(32) + +static int s3c64xx_spi_map_mssg(struct s3c64xx_spi_driver_data *sdd, + struct spi_message *msg) +{ + struct device *dev = &sdd->pdev->dev; + struct spi_transfer *xfer; + + if (msg->is_dma_mapped) + return 0; + + /* First mark all xfer unmapped */ + list_for_each_entry(xfer, &msg->transfers, transfer_list) { + xfer->rx_dma = XFER_DMAADDR_INVALID; + xfer->tx_dma = XFER_DMAADDR_INVALID; + } + + /* Map until end or first fail */ + list_for_each_entry(xfer, &msg->transfers, transfer_list) { + + if (xfer->tx_buf != NULL) { + xfer->tx_dma = dma_map_single(dev, xfer->tx_buf, + xfer->len, DMA_TO_DEVICE); + if (dma_mapping_error(dev, xfer->tx_dma)) { + dev_err(dev, "dma_map_single Tx failed\n"); + xfer->tx_dma = XFER_DMAADDR_INVALID; + return -ENOMEM; + } + } + + if (xfer->rx_buf != NULL) { + xfer->rx_dma = dma_map_single(dev, xfer->rx_buf, + xfer->len, DMA_FROM_DEVICE); + if (dma_mapping_error(dev, xfer->rx_dma)) { + dev_err(dev, "dma_map_single Rx failed\n"); + dma_unmap_single(dev, xfer->tx_dma, + xfer->len, DMA_TO_DEVICE); + xfer->tx_dma = XFER_DMAADDR_INVALID; + xfer->rx_dma = XFER_DMAADDR_INVALID; + return -ENOMEM; + } + } + } + + return 0; +} + +static void s3c64xx_spi_unmap_mssg(struct s3c64xx_spi_driver_data *sdd, + struct spi_message *msg) +{ + struct device *dev = &sdd->pdev->dev; + struct spi_transfer *xfer; + + if (msg->is_dma_mapped) + return; + + list_for_each_entry(xfer, &msg->transfers, transfer_list) { + + if (xfer->rx_buf != NULL + && xfer->rx_dma != XFER_DMAADDR_INVALID) + dma_unmap_single(dev, xfer->rx_dma, + xfer->len, DMA_FROM_DEVICE); + + if (xfer->tx_buf != NULL + && xfer->tx_dma != XFER_DMAADDR_INVALID) + dma_unmap_single(dev, xfer->tx_dma, + xfer->len, DMA_TO_DEVICE); + } +} + +static void handle_msg(struct s3c64xx_spi_driver_data *sdd, + struct spi_message *msg) +{ + struct s3c64xx_spi_cntrlr_info *sci = sdd->cntrlr_info; + struct spi_device *spi = msg->spi; + struct s3c64xx_spi_csinfo *cs = spi->controller_data; + struct spi_transfer *xfer; + int status = 0, cs_toggle = 0; + u32 speed; + u8 bpw; + + /* If Master's(controller) state differs from that needed by Slave */ + if (sdd->cur_speed != spi->max_speed_hz + || sdd->cur_mode != spi->mode + || sdd->cur_bpw != spi->bits_per_word) { + sdd->cur_bpw = spi->bits_per_word; + sdd->cur_speed = spi->max_speed_hz; + sdd->cur_mode = spi->mode; + s3c64xx_spi_config(sdd); + } + + /* Map all the transfers if needed */ + if (s3c64xx_spi_map_mssg(sdd, msg)) { + dev_err(&spi->dev, + "Xfer: Unable to map message buffers!\n"); + status = -ENOMEM; + goto out; + } + + /* Configure feedback delay */ + writel(cs->fb_delay & 0x3, sdd->regs + S3C64XX_SPI_FB_CLK); + + list_for_each_entry(xfer, &msg->transfers, transfer_list) { + + unsigned long flags; + int use_dma; + + INIT_COMPLETION(sdd->xfer_completion); + + /* Only BPW and Speed may change across transfers */ + bpw = xfer->bits_per_word ? : spi->bits_per_word; + speed = xfer->speed_hz ? : spi->max_speed_hz; + + if (bpw != sdd->cur_bpw || speed != sdd->cur_speed) { + sdd->cur_bpw = bpw; + sdd->cur_speed = speed; + s3c64xx_spi_config(sdd); + } + + /* Polling method for xfers not bigger than FIFO capacity */ + if (xfer->len <= ((sci->fifo_lvl_mask >> 1) + 1)) + use_dma = 0; + else + use_dma = 1; + + spin_lock_irqsave(&sdd->lock, flags); + + /* Pending only which is to be done */ + sdd->state &= ~RXBUSY; + sdd->state &= ~TXBUSY; + + enable_datapath(sdd, spi, xfer, use_dma); + + /* Slave Select */ + enable_cs(sdd, spi); + + /* Start the signals */ + S3C64XX_SPI_ACT(sdd); + + spin_unlock_irqrestore(&sdd->lock, flags); + + status = wait_for_xfer(sdd, xfer, use_dma); + + /* Quiese the signals */ + S3C64XX_SPI_DEACT(sdd); + + if (status) { + dev_err(&spi->dev, "I/O Error: \ + rx-%d tx-%d res:rx-%c tx-%c len-%d\n", + xfer->rx_buf ? 1 : 0, xfer->tx_buf ? 1 : 0, + (sdd->state & RXBUSY) ? 'f' : 'p', + (sdd->state & TXBUSY) ? 'f' : 'p', + xfer->len); + + if (use_dma) { + if (xfer->tx_buf != NULL + && (sdd->state & TXBUSY)) + s3c2410_dma_ctrl(sdd->tx_dmach, + S3C2410_DMAOP_FLUSH); + if (xfer->rx_buf != NULL + && (sdd->state & RXBUSY)) + s3c2410_dma_ctrl(sdd->rx_dmach, + S3C2410_DMAOP_FLUSH); + } + + goto out; + } + + if (xfer->delay_usecs) + udelay(xfer->delay_usecs); + + if (xfer->cs_change) { + /* Hint that the next mssg is gonna be + for the same device */ + if (list_is_last(&xfer->transfer_list, + &msg->transfers)) + cs_toggle = 1; + else + disable_cs(sdd, spi); + } + + msg->actual_length += xfer->len; + + flush_fifo(sdd); + } + +out: + if (!cs_toggle || status) + disable_cs(sdd, spi); + else + sdd->tgl_spi = spi; + + s3c64xx_spi_unmap_mssg(sdd, msg); + + msg->status = status; + + if (msg->complete) + msg->complete(msg->context); +} + +static int acquire_dma(struct s3c64xx_spi_driver_data *sdd) +{ + if (s3c2410_dma_request(sdd->rx_dmach, + &s3c64xx_spi_dma_client, NULL) < 0) { + dev_err(&sdd->pdev->dev, "cannot get RxDMA\n"); + return 0; + } + s3c2410_dma_set_buffdone_fn(sdd->rx_dmach, s3c64xx_spi_dma_rxcb); + s3c2410_dma_devconfig(sdd->rx_dmach, S3C2410_DMASRC_HW, + sdd->sfr_start + S3C64XX_SPI_RX_DATA); + + if (s3c2410_dma_request(sdd->tx_dmach, + &s3c64xx_spi_dma_client, NULL) < 0) { + dev_err(&sdd->pdev->dev, "cannot get TxDMA\n"); + s3c2410_dma_free(sdd->rx_dmach, &s3c64xx_spi_dma_client); + return 0; + } + s3c2410_dma_set_buffdone_fn(sdd->tx_dmach, s3c64xx_spi_dma_txcb); + s3c2410_dma_devconfig(sdd->tx_dmach, S3C2410_DMASRC_MEM, + sdd->sfr_start + S3C64XX_SPI_TX_DATA); + + return 1; +} + +static void s3c64xx_spi_work(struct work_struct *work) +{ + struct s3c64xx_spi_driver_data *sdd = container_of(work, + struct s3c64xx_spi_driver_data, work); + unsigned long flags; + + /* Acquire DMA channels */ + while (!acquire_dma(sdd)) + msleep(10); + + spin_lock_irqsave(&sdd->lock, flags); + + while (!list_empty(&sdd->queue) + && !(sdd->state & SUSPND)) { + + struct spi_message *msg; + + msg = container_of(sdd->queue.next, struct spi_message, queue); + + list_del_init(&msg->queue); + + /* Set Xfer busy flag */ + sdd->state |= SPIBUSY; + + spin_unlock_irqrestore(&sdd->lock, flags); + + handle_msg(sdd, msg); + + spin_lock_irqsave(&sdd->lock, flags); + + sdd->state &= ~SPIBUSY; + } + + spin_unlock_irqrestore(&sdd->lock, flags); + + /* Free DMA channels */ + s3c2410_dma_free(sdd->tx_dmach, &s3c64xx_spi_dma_client); + s3c2410_dma_free(sdd->rx_dmach, &s3c64xx_spi_dma_client); +} + +static int s3c64xx_spi_transfer(struct spi_device *spi, + struct spi_message *msg) +{ + struct s3c64xx_spi_driver_data *sdd; + unsigned long flags; + + sdd = spi_master_get_devdata(spi->master); + + spin_lock_irqsave(&sdd->lock, flags); + + if (sdd->state & SUSPND) { + spin_unlock_irqrestore(&sdd->lock, flags); + return -ESHUTDOWN; + } + + msg->status = -EINPROGRESS; + msg->actual_length = 0; + + list_add_tail(&msg->queue, &sdd->queue); + + queue_work(sdd->workqueue, &sdd->work); + + spin_unlock_irqrestore(&sdd->lock, flags); + + return 0; +} + +/* + * Here we only check the validity of requested configuration + * and save the configuration in a local data-structure. + * The controller is actually configured only just before we + * get a message to transfer. + */ +static int s3c64xx_spi_setup(struct spi_device *spi) +{ + struct s3c64xx_spi_csinfo *cs = spi->controller_data; + struct s3c64xx_spi_driver_data *sdd; + struct s3c64xx_spi_cntrlr_info *sci; + struct spi_message *msg; + u32 psr, speed; + unsigned long flags; + int err = 0; + + if (cs == NULL || cs->set_level == NULL) { + dev_err(&spi->dev, "No CS for SPI(%d)\n", spi->chip_select); + return -ENODEV; + } + + sdd = spi_master_get_devdata(spi->master); + sci = sdd->cntrlr_info; + + spin_lock_irqsave(&sdd->lock, flags); + + list_for_each_entry(msg, &sdd->queue, queue) { + /* Is some mssg is already queued for this device */ + if (msg->spi == spi) { + dev_err(&spi->dev, + "setup: attempt while mssg in queue!\n"); + spin_unlock_irqrestore(&sdd->lock, flags); + return -EBUSY; + } + } + + if (sdd->state & SUSPND) { + spin_unlock_irqrestore(&sdd->lock, flags); + dev_err(&spi->dev, + "setup: SPI-%d not active!\n", spi->master->bus_num); + return -ESHUTDOWN; + } + + spin_unlock_irqrestore(&sdd->lock, flags); + + if (spi->bits_per_word != 8 + && spi->bits_per_word != 16 + && spi->bits_per_word != 32) { + dev_err(&spi->dev, "setup: %dbits/wrd not supported!\n", + spi->bits_per_word); + err = -EINVAL; + goto setup_exit; + } + + /* Check if we can provide the requested rate */ + speed = clk_get_rate(sci->src_clk) / 2 / (0 + 1); /* Max possible */ + + if (spi->max_speed_hz > speed) + spi->max_speed_hz = speed; + + psr = clk_get_rate(sci->src_clk) / 2 / spi->max_speed_hz - 1; + psr &= S3C64XX_SPI_PSR_MASK; + if (psr == S3C64XX_SPI_PSR_MASK) + psr--; + + speed = clk_get_rate(sci->src_clk) / 2 / (psr + 1); + if (spi->max_speed_hz < speed) { + if (psr+1 < S3C64XX_SPI_PSR_MASK) { + psr++; + } else { + err = -EINVAL; + goto setup_exit; + } + } + + speed = clk_get_rate(sci->src_clk) / 2 / (psr + 1); + if (spi->max_speed_hz >= speed) + spi->max_speed_hz = speed; + else + err = -EINVAL; + +setup_exit: + + /* setup() returns with device de-selected */ + disable_cs(sdd, spi); + + return err; +} + +static void s3c64xx_spi_hwinit(struct s3c64xx_spi_driver_data *sdd, int channel) +{ + struct s3c64xx_spi_cntrlr_info *sci = sdd->cntrlr_info; + void __iomem *regs = sdd->regs; + unsigned int val; + + sdd->cur_speed = 0; + + S3C64XX_SPI_DEACT(sdd); + + /* Disable Interrupts - we use Polling if not DMA mode */ + writel(0, regs + S3C64XX_SPI_INT_EN); + + writel(sci->src_clk_nr << S3C64XX_SPI_CLKSEL_SRCSHFT, + regs + S3C64XX_SPI_CLK_CFG); + writel(0, regs + S3C64XX_SPI_MODE_CFG); + writel(0, regs + S3C64XX_SPI_PACKET_CNT); + + /* Clear any irq pending bits */ + writel(readl(regs + S3C64XX_SPI_PENDING_CLR), + regs + S3C64XX_SPI_PENDING_CLR); + + writel(0, regs + S3C64XX_SPI_SWAP_CFG); + + val = readl(regs + S3C64XX_SPI_MODE_CFG); + val &= ~S3C64XX_SPI_MODE_4BURST; + val &= ~(S3C64XX_SPI_MAX_TRAILCNT << S3C64XX_SPI_TRAILCNT_OFF); + val |= (S3C64XX_SPI_TRAILCNT << S3C64XX_SPI_TRAILCNT_OFF); + writel(val, regs + S3C64XX_SPI_MODE_CFG); + + flush_fifo(sdd); +} + +static int __init s3c64xx_spi_probe(struct platform_device *pdev) +{ + struct resource *mem_res, *dmatx_res, *dmarx_res; + struct s3c64xx_spi_driver_data *sdd; + struct s3c64xx_spi_cntrlr_info *sci; + struct spi_master *master; + int ret; + + if (pdev->id < 0) { + dev_err(&pdev->dev, + "Invalid platform device id-%d\n", pdev->id); + return -ENODEV; + } + + if (pdev->dev.platform_data == NULL) { + dev_err(&pdev->dev, "platform_data missing!\n"); + return -ENODEV; + } + + /* Check for availability of necessary resource */ + + dmatx_res = platform_get_resource(pdev, IORESOURCE_DMA, 0); + if (dmatx_res == NULL) { + dev_err(&pdev->dev, "Unable to get SPI-Tx dma resource\n"); + return -ENXIO; + } + + dmarx_res = platform_get_resource(pdev, IORESOURCE_DMA, 1); + if (dmarx_res == NULL) { + dev_err(&pdev->dev, "Unable to get SPI-Rx dma resource\n"); + return -ENXIO; + } + + mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (mem_res == NULL) { + dev_err(&pdev->dev, "Unable to get SPI MEM resource\n"); + return -ENXIO; + } + + master = spi_alloc_master(&pdev->dev, + sizeof(struct s3c64xx_spi_driver_data)); + if (master == NULL) { + dev_err(&pdev->dev, "Unable to allocate SPI Master\n"); + return -ENOMEM; + } + + sci = pdev->dev.platform_data; + + platform_set_drvdata(pdev, master); + + sdd = spi_master_get_devdata(master); + sdd->master = master; + sdd->cntrlr_info = sci; + sdd->pdev = pdev; + sdd->sfr_start = mem_res->start; + sdd->tx_dmach = dmatx_res->start; + sdd->rx_dmach = dmarx_res->start; + + sdd->cur_bpw = 8; + + master->bus_num = pdev->id; + master->setup = s3c64xx_spi_setup; + master->transfer = s3c64xx_spi_transfer; + master->num_chipselect = sci->num_cs; + master->dma_alignment = 8; + /* the spi->mode bits understood by this driver: */ + master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH; + + if (request_mem_region(mem_res->start, + resource_size(mem_res), pdev->name) == NULL) { + dev_err(&pdev->dev, "Req mem region failed\n"); + ret = -ENXIO; + goto err0; + } + + sdd->regs = ioremap(mem_res->start, resource_size(mem_res)); + if (sdd->regs == NULL) { + dev_err(&pdev->dev, "Unable to remap IO\n"); + ret = -ENXIO; + goto err1; + } + + if (sci->cfg_gpio == NULL || sci->cfg_gpio(pdev)) { + dev_err(&pdev->dev, "Unable to config gpio\n"); + ret = -EBUSY; + goto err2; + } + + /* Setup clocks */ + sdd->clk = clk_get(&pdev->dev, "spi"); + if (IS_ERR(sdd->clk)) { + dev_err(&pdev->dev, "Unable to acquire clock 'spi'\n"); + ret = PTR_ERR(sdd->clk); + goto err3; + } + + if (clk_enable(sdd->clk)) { + dev_err(&pdev->dev, "Couldn't enable clock 'spi'\n"); + ret = -EBUSY; + goto err4; + } + + if (sci->src_clk_nr == S3C64XX_SPI_SRCCLK_PCLK) + sci->src_clk = sdd->clk; + else + sci->src_clk = clk_get(&pdev->dev, sci->src_clk_name); + if (IS_ERR(sci->src_clk)) { + dev_err(&pdev->dev, + "Unable to acquire clock '%s'\n", sci->src_clk_name); + ret = PTR_ERR(sci->src_clk); + goto err5; + } + + if (sci->src_clk != sdd->clk && clk_enable(sci->src_clk)) { + dev_err(&pdev->dev, "Couldn't enable clock '%s'\n", + sci->src_clk_name); + ret = -EBUSY; + goto err6; + } + + sdd->workqueue = create_singlethread_workqueue( + dev_name(master->dev.parent)); + if (sdd->workqueue == NULL) { + dev_err(&pdev->dev, "Unable to create workqueue\n"); + ret = -ENOMEM; + goto err7; + } + + /* Setup Deufult Mode */ + s3c64xx_spi_hwinit(sdd, pdev->id); + + spin_lock_init(&sdd->lock); + init_completion(&sdd->xfer_completion); + INIT_WORK(&sdd->work, s3c64xx_spi_work); + INIT_LIST_HEAD(&sdd->queue); + + if (spi_register_master(master)) { + dev_err(&pdev->dev, "cannot register SPI master\n"); + ret = -EBUSY; + goto err8; + } + + dev_dbg(&pdev->dev, "Samsung SoC SPI Driver loaded for Bus SPI-%d \ + with %d Slaves attached\n", + pdev->id, master->num_chipselect); + dev_dbg(&pdev->dev, "\tIOmem=[0x%x-0x%x]\ + \tDMA=[Rx-%d, Tx-%d]\n", + mem_res->end, mem_res->start, + sdd->rx_dmach, sdd->tx_dmach); + + return 0; + +err8: + destroy_workqueue(sdd->workqueue); +err7: + if (sci->src_clk != sdd->clk) + clk_disable(sci->src_clk); +err6: + if (sci->src_clk != sdd->clk) + clk_put(sci->src_clk); +err5: + clk_disable(sdd->clk); +err4: + clk_put(sdd->clk); +err3: +err2: + iounmap((void *) sdd->regs); +err1: + release_mem_region(mem_res->start, resource_size(mem_res)); +err0: + platform_set_drvdata(pdev, NULL); + spi_master_put(master); + + return ret; +} + +static int s3c64xx_spi_remove(struct platform_device *pdev) +{ + struct spi_master *master = spi_master_get(platform_get_drvdata(pdev)); + struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(master); + struct s3c64xx_spi_cntrlr_info *sci = sdd->cntrlr_info; + struct resource *mem_res; + unsigned long flags; + + spin_lock_irqsave(&sdd->lock, flags); + sdd->state |= SUSPND; + spin_unlock_irqrestore(&sdd->lock, flags); + + while (sdd->state & SPIBUSY) + msleep(10); + + spi_unregister_master(master); + + destroy_workqueue(sdd->workqueue); + + if (sci->src_clk != sdd->clk) + clk_disable(sci->src_clk); + + if (sci->src_clk != sdd->clk) + clk_put(sci->src_clk); + + clk_disable(sdd->clk); + clk_put(sdd->clk); + + iounmap((void *) sdd->regs); + + mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + release_mem_region(mem_res->start, resource_size(mem_res)); + + platform_set_drvdata(pdev, NULL); + spi_master_put(master); + + return 0; +} + +#ifdef CONFIG_PM +static int s3c64xx_spi_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct spi_master *master = spi_master_get(platform_get_drvdata(pdev)); + struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(master); + struct s3c64xx_spi_cntrlr_info *sci = sdd->cntrlr_info; + struct s3c64xx_spi_csinfo *cs; + unsigned long flags; + + spin_lock_irqsave(&sdd->lock, flags); + sdd->state |= SUSPND; + spin_unlock_irqrestore(&sdd->lock, flags); + + while (sdd->state & SPIBUSY) + msleep(10); + + /* Disable the clock */ + if (sci->src_clk != sdd->clk) + clk_disable(sci->src_clk); + + clk_disable(sdd->clk); + + sdd->cur_speed = 0; /* Output Clock is stopped */ + + return 0; +} + +static int s3c64xx_spi_resume(struct platform_device *pdev) +{ + struct spi_master *master = spi_master_get(platform_get_drvdata(pdev)); + struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(master); + struct s3c64xx_spi_cntrlr_info *sci = sdd->cntrlr_info; + unsigned long flags; + + sci->cfg_gpio(pdev); + + /* Enable the clock */ + if (sci->src_clk != sdd->clk) + clk_enable(sci->src_clk); + + clk_enable(sdd->clk); + + s3c64xx_spi_hwinit(sdd, pdev->id); + + spin_lock_irqsave(&sdd->lock, flags); + sdd->state &= ~SUSPND; + spin_unlock_irqrestore(&sdd->lock, flags); + + return 0; +} +#else +#define s3c64xx_spi_suspend NULL +#define s3c64xx_spi_resume NULL +#endif /* CONFIG_PM */ + +static struct platform_driver s3c64xx_spi_driver = { + .driver = { + .name = "s3c64xx-spi", + .owner = THIS_MODULE, + }, + .remove = s3c64xx_spi_remove, + .suspend = s3c64xx_spi_suspend, + .resume = s3c64xx_spi_resume, +}; +MODULE_ALIAS("platform:s3c64xx-spi"); + +static int __init s3c64xx_spi_init(void) +{ + return platform_driver_probe(&s3c64xx_spi_driver, s3c64xx_spi_probe); +} +module_init(s3c64xx_spi_init); + +static void __exit s3c64xx_spi_exit(void) +{ + platform_driver_unregister(&s3c64xx_spi_driver); +} +module_exit(s3c64xx_spi_exit); + +MODULE_AUTHOR("Jaswinder Singh <jassi.brar@samsung.com>"); +MODULE_DESCRIPTION("S3C64XX SPI Controller Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/spi/spi_sh_sci.c b/drivers/spi/spi_sh_sci.c index 7d36720eb982..a65c12ffa733 100644 --- a/drivers/spi/spi_sh_sci.c +++ b/drivers/spi/spi_sh_sci.c @@ -148,7 +148,7 @@ static int sh_sci_spi_probe(struct platform_device *dev) ret = -ENOENT; goto err1; } - sp->membase = ioremap(r->start, r->end - r->start + 1); + sp->membase = ioremap(r->start, resource_size(r)); if (!sp->membase) { ret = -ENXIO; goto err1; diff --git a/drivers/spi/spi_txx9.c b/drivers/spi/spi_txx9.c index 19f75627c3de..dfa024b633e1 100644 --- a/drivers/spi/spi_txx9.c +++ b/drivers/spi/spi_txx9.c @@ -375,12 +375,10 @@ static int __init txx9spi_probe(struct platform_device *dev) res = platform_get_resource(dev, IORESOURCE_MEM, 0); if (!res) goto exit_busy; - if (!devm_request_mem_region(&dev->dev, - res->start, res->end - res->start + 1, + if (!devm_request_mem_region(&dev->dev, res->start, resource_size(res), "spi_txx9")) goto exit_busy; - c->membase = devm_ioremap(&dev->dev, - res->start, res->end - res->start + 1); + c->membase = devm_ioremap(&dev->dev, res->start, resource_size(res)); if (!c->membase) goto exit_busy; diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c index 9c446e6003d5..ea1bec3c9a13 100644 --- a/drivers/spi/spidev.c +++ b/drivers/spi/spidev.c @@ -53,7 +53,7 @@ #define SPIDEV_MAJOR 153 /* assigned */ #define N_SPI_MINORS 32 /* ... up to 256 */ -static unsigned long minors[N_SPI_MINORS / BITS_PER_LONG]; +static DECLARE_BITMAP(minors, N_SPI_MINORS); /* Bit masks for spi_device.mode management. Note that incorrect @@ -558,7 +558,7 @@ static struct class *spidev_class; /*-------------------------------------------------------------------------*/ -static int spidev_probe(struct spi_device *spi) +static int __devinit spidev_probe(struct spi_device *spi) { struct spidev_data *spidev; int status; @@ -607,7 +607,7 @@ static int spidev_probe(struct spi_device *spi) return status; } -static int spidev_remove(struct spi_device *spi) +static int __devexit spidev_remove(struct spi_device *spi) { struct spidev_data *spidev = spi_get_drvdata(spi); @@ -629,7 +629,7 @@ static int spidev_remove(struct spi_device *spi) return 0; } -static struct spi_driver spidev_spi = { +static struct spi_driver spidev_spi_driver = { .driver = { .name = "spidev", .owner = THIS_MODULE, @@ -661,14 +661,14 @@ static int __init spidev_init(void) spidev_class = class_create(THIS_MODULE, "spidev"); if (IS_ERR(spidev_class)) { - unregister_chrdev(SPIDEV_MAJOR, spidev_spi.driver.name); + unregister_chrdev(SPIDEV_MAJOR, spidev_spi_driver.driver.name); return PTR_ERR(spidev_class); } - status = spi_register_driver(&spidev_spi); + status = spi_register_driver(&spidev_spi_driver); if (status < 0) { class_destroy(spidev_class); - unregister_chrdev(SPIDEV_MAJOR, spidev_spi.driver.name); + unregister_chrdev(SPIDEV_MAJOR, spidev_spi_driver.driver.name); } return status; } @@ -676,9 +676,9 @@ module_init(spidev_init); static void __exit spidev_exit(void) { - spi_unregister_driver(&spidev_spi); + spi_unregister_driver(&spidev_spi_driver); class_destroy(spidev_class); - unregister_chrdev(SPIDEV_MAJOR, spidev_spi.driver.name); + unregister_chrdev(SPIDEV_MAJOR, spidev_spi_driver.driver.name); } module_exit(spidev_exit); diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig index 093f57af32d3..94eb86319ff3 100644 --- a/drivers/staging/Kconfig +++ b/drivers/staging/Kconfig @@ -87,8 +87,6 @@ source "drivers/staging/frontier/Kconfig" source "drivers/staging/dream/Kconfig" -source "drivers/staging/dst/Kconfig" - source "drivers/staging/pohmelfs/Kconfig" source "drivers/staging/b3dfg/Kconfig" @@ -145,5 +143,7 @@ source "drivers/staging/wavelan/Kconfig" source "drivers/staging/netwave/Kconfig" +source "drivers/staging/sm7xx/Kconfig" + endif # !STAGING_EXCLUDE_BUILD endif # STAGING diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile index 069864f4391e..b5e67b889f60 100644 --- a/drivers/staging/Makefile +++ b/drivers/staging/Makefile @@ -26,7 +26,6 @@ obj-$(CONFIG_RTL8192E) += rtl8192e/ obj-$(CONFIG_INPUT_MIMIO) += mimio/ obj-$(CONFIG_TRANZPORT) += frontier/ obj-$(CONFIG_DREAM) += dream/ -obj-$(CONFIG_DST) += dst/ obj-$(CONFIG_POHMELFS) += pohmelfs/ obj-$(CONFIG_B3DFG) += b3dfg/ obj-$(CONFIG_IDE_PHISON) += phison/ @@ -53,3 +52,4 @@ obj-$(CONFIG_ARLAN) += arlan/ obj-$(CONFIG_WAVELAN) += wavelan/ obj-$(CONFIG_PCMCIA_WAVELAN) += wavelan/ obj-$(CONFIG_PCMCIA_NETWAVE) += netwave/ +obj-$(CONFIG_FB_SM7XX) += sm7xx/ diff --git a/drivers/staging/batman-adv/Kconfig b/drivers/staging/batman-adv/Kconfig index 7632f5760060..1d74dabf9511 100644 --- a/drivers/staging/batman-adv/Kconfig +++ b/drivers/staging/batman-adv/Kconfig @@ -4,6 +4,7 @@ config BATMAN_ADV tristate "B.A.T.M.A.N. Advanced Meshing Protocol" + depends on PROC_FS && PACKET default n ---help--- diff --git a/drivers/staging/batman-adv/send.c b/drivers/staging/batman-adv/send.c index d724798278d6..eb617508cca4 100644 --- a/drivers/staging/batman-adv/send.c +++ b/drivers/staging/batman-adv/send.c @@ -363,8 +363,10 @@ void add_bcast_packet_to_list(unsigned char *packet_buff, int packet_len) return; forw_packet->packet_buff = kmalloc(packet_len, GFP_ATOMIC); - if (!forw_packet->packet_buff) + if (!forw_packet->packet_buff) { + kfree(forw_packet); return; + } forw_packet->packet_len = packet_len; memcpy(forw_packet->packet_buff, packet_buff, forw_packet->packet_len); diff --git a/drivers/staging/comedi/comedi.h b/drivers/staging/comedi/comedi.h index ccc5cdc008c6..b559a9c2f857 100644 --- a/drivers/staging/comedi/comedi.h +++ b/drivers/staging/comedi/comedi.h @@ -451,7 +451,7 @@ #define COMEDI_CB_EOS 1 /* end of scan */ #define COMEDI_CB_EOA 2 /* end of acquisition */ -#define COMEDI_CB_BLOCK 4 /* DEPRECATED: convenient block size */ +#define COMEDI_CB_BLOCK 4 /* data has arrived: wakes up read() / write() */ #define COMEDI_CB_EOBUF 8 /* DEPRECATED: end of buffer */ #define COMEDI_CB_ERROR 16 /* card error during acquisition */ #define COMEDI_CB_OVERFLOW 32 /* buffer overflow/underflow */ diff --git a/drivers/staging/comedi/drivers/jr3_pci.c b/drivers/staging/comedi/drivers/jr3_pci.c index 0d2c2eb23b23..bd397840dcba 100644 --- a/drivers/staging/comedi/drivers/jr3_pci.c +++ b/drivers/staging/comedi/drivers/jr3_pci.c @@ -849,8 +849,11 @@ static int jr3_pci_attach(struct comedi_device *dev, } devpriv->pci_enabled = 1; - devpriv->iobase = - ioremap(pci_resource_start(card, 0), sizeof(struct jr3_t)); + devpriv->iobase = ioremap(pci_resource_start(card, 0), + offsetof(struct jr3_t, channel[devpriv->n_channels])); + if (!devpriv->iobase) + return -ENOMEM; + result = alloc_subdevices(dev, devpriv->n_channels); if (result < 0) goto out; diff --git a/drivers/staging/comedi/drivers/usbdux.c b/drivers/staging/comedi/drivers/usbdux.c index 06c020466298..9a1b559c4b0d 100644 --- a/drivers/staging/comedi/drivers/usbdux.c +++ b/drivers/staging/comedi/drivers/usbdux.c @@ -1,4 +1,4 @@ -#define DRIVER_VERSION "v2.3" +#define DRIVER_VERSION "v2.4" #define DRIVER_AUTHOR "Bernd Porr, BerndPorr@f2s.com" #define DRIVER_DESC "Stirling/ITL USB-DUX -- Bernd.Porr@f2s.com" /* @@ -81,6 +81,8 @@ sampling rate. If you sample two channels you get 4kHz and so on. * 2.1: changed PWM API * 2.2: added firmware kernel request to fix an udev problem * 2.3: corrected a bug in bulk timeouts which were far too short + * 2.4: fixed a bug which causes the driver to hang when it ran out of data. + * Thanks to Jan-Matthias Braun and Ian to spot the bug and fix it. * */ @@ -532,6 +534,7 @@ static void usbduxsub_ai_IsocIrq(struct urb *urb) } } /* tell comedi that data is there */ + s->async->events |= COMEDI_CB_BLOCK | COMEDI_CB_EOS; comedi_event(this_usbduxsub->comedidev, s); } diff --git a/drivers/staging/dst/Kconfig b/drivers/staging/dst/Kconfig deleted file mode 100644 index 448d342ac2a2..000000000000 --- a/drivers/staging/dst/Kconfig +++ /dev/null @@ -1,67 +0,0 @@ -config DST - tristate "Distributed storage" - depends on NET && CRYPTO && SYSFS && BLK_DEV - select CONNECTOR - ---help--- - DST is a network block device storage, which can be used to organize - exported storage on the remote nodes into the local block device. - - DST works on top of any network media and protocol; it is just a matter - of configuration utility to understand the correct addresses. The most - common example is TCP over IP, which allows to pass through firewalls and - create remote backup storage in a different datacenter. DST requires - single port to be enabled on the exporting node and outgoing connections - on the local node. - - DST works with in-kernel client and server, which improves performance by - eliminating unneded data copies and by not depending on the version - of the external IO components. It requires userspace configuration utility - though. - - DST uses transaction model, when each store has to be explicitly acked - from the remote node to be considered as successfully written. There - may be lots of in-flight transactions. When remote host does not ack - the transaction it will be resent predefined number of times with specified - timeouts between them. All those parameters are configurable. Transactions - are marked as failed after all resends complete unsuccessfully; having - long enough resend timeout and/or large number of resends allows not to - return error to the higher (FS usually) layer in case of short network - problems or remote node outages. In case of network RAID setup this means - that storage will not degrade until transactions are marked as failed, and - thus will not force checksum recalculation and data rebuild. In case of - connection failure DST will try to reconnect to the remote node automatically. - DST sends ping commands at idle time to detect if remote node is alive. - - Because of transactional model it is possible to use zero-copy sending - without worry of data corruption (which in turn could be detected by the - strong checksums though). - - DST may fully encrypt the data channel in case of untrusted channel and implement - strong checksum of the transferred data. It is possible to configure algorithms - and crypto keys; they should match on both sides of the network channel. - Crypto processing does not introduce noticeble performance overhead, since DST - uses configurable pool of threads to perform crypto processing. - - DST utilizes memory pool model of all its transaction allocations (it is the - only additional allocation on the client) and server allocations (bio pools, - while pages are allocated from the slab). - - At startup DST performs a simple negotiation with the export node to determine - access permissions and size of the exported storage. It can be extended if - new parameters should be autonegotiated. - - DST carries block IO flags in the protocol, which allows to transparently implement - barriers and sync/flush operations. Those flags are used in the export node where - IO against the local storage is performed, which means that sync write will be sync - on the remote node too, which in turn improves data integrity and improved resistance - to errors and data corruption during power outages or storage damages. - - Homepage: http://www.ioremap.net/projects/dst - Userspace configuration utility and the latest releases: http://www.ioremap.net/archive/dst/ - -config DST_DEBUG - bool "DST debug" - depends on DST - ---help--- - This option will enable HEAVY debugging of the DST. - Turn it on ONLY if you have to debug some really obscure problem. diff --git a/drivers/staging/dst/Makefile b/drivers/staging/dst/Makefile deleted file mode 100644 index 3a8b0cf9643e..000000000000 --- a/drivers/staging/dst/Makefile +++ /dev/null @@ -1,3 +0,0 @@ -obj-$(CONFIG_DST) += nst.o - -nst-y := dcore.o state.o export.o thread_pool.o crypto.o trans.o diff --git a/drivers/staging/dst/crypto.c b/drivers/staging/dst/crypto.c deleted file mode 100644 index 351295c97a4b..000000000000 --- a/drivers/staging/dst/crypto.c +++ /dev/null @@ -1,733 +0,0 @@ -/* - * 2007+ Copyright (c) Evgeniy Polyakov <zbr@ioremap.net> - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/bio.h> -#include <linux/crypto.h> -#include <linux/dst.h> -#include <linux/kernel.h> -#include <linux/scatterlist.h> -#include <linux/slab.h> - -/* - * Tricky bastard, but IV can be more complex with time... - */ -static inline u64 dst_gen_iv(struct dst_trans *t) -{ - return t->gen; -} - -/* - * Crypto machinery: hash/cipher support for the given crypto controls. - */ -static struct crypto_hash *dst_init_hash(struct dst_crypto_ctl *ctl, u8 *key) -{ - int err; - struct crypto_hash *hash; - - hash = crypto_alloc_hash(ctl->hash_algo, 0, CRYPTO_ALG_ASYNC); - if (IS_ERR(hash)) { - err = PTR_ERR(hash); - dprintk("%s: failed to allocate hash '%s', err: %d.\n", - __func__, ctl->hash_algo, err); - goto err_out_exit; - } - - ctl->crypto_attached_size = crypto_hash_digestsize(hash); - - if (!ctl->hash_keysize) - return hash; - - err = crypto_hash_setkey(hash, key, ctl->hash_keysize); - if (err) { - dprintk("%s: failed to set key for hash '%s', err: %d.\n", - __func__, ctl->hash_algo, err); - goto err_out_free; - } - - return hash; - -err_out_free: - crypto_free_hash(hash); -err_out_exit: - return ERR_PTR(err); -} - -static struct crypto_ablkcipher *dst_init_cipher(struct dst_crypto_ctl *ctl, - u8 *key) -{ - int err = -EINVAL; - struct crypto_ablkcipher *cipher; - - if (!ctl->cipher_keysize) - goto err_out_exit; - - cipher = crypto_alloc_ablkcipher(ctl->cipher_algo, 0, 0); - if (IS_ERR(cipher)) { - err = PTR_ERR(cipher); - dprintk("%s: failed to allocate cipher '%s', err: %d.\n", - __func__, ctl->cipher_algo, err); - goto err_out_exit; - } - - crypto_ablkcipher_clear_flags(cipher, ~0); - - err = crypto_ablkcipher_setkey(cipher, key, ctl->cipher_keysize); - if (err) { - dprintk("%s: failed to set key for cipher '%s', err: %d.\n", - __func__, ctl->cipher_algo, err); - goto err_out_free; - } - - return cipher; - -err_out_free: - crypto_free_ablkcipher(cipher); -err_out_exit: - return ERR_PTR(err); -} - -/* - * Crypto engine has a pool of pages to encrypt data into before sending - * it over the network. This pool is freed/allocated here. - */ -static void dst_crypto_pages_free(struct dst_crypto_engine *e) -{ - unsigned int i; - - for (i = 0; i < e->page_num; ++i) - __free_page(e->pages[i]); - kfree(e->pages); -} - -static int dst_crypto_pages_alloc(struct dst_crypto_engine *e, int num) -{ - int i; - - e->pages = kmalloc(num * sizeof(struct page **), GFP_KERNEL); - if (!e->pages) - return -ENOMEM; - - for (i = 0; i < num; ++i) { - e->pages[i] = alloc_page(GFP_KERNEL); - if (!e->pages[i]) - goto err_out_free_pages; - } - - e->page_num = num; - return 0; - -err_out_free_pages: - while (--i >= 0) - __free_page(e->pages[i]); - - kfree(e->pages); - return -ENOMEM; -} - -/* - * Initialize crypto engine for given node. - * Setup cipher/hash, keys, pool of threads and private data. - */ -static int dst_crypto_engine_init(struct dst_crypto_engine *e, - struct dst_node *n) -{ - int err; - struct dst_crypto_ctl *ctl = &n->crypto; - - err = dst_crypto_pages_alloc(e, n->max_pages); - if (err) - goto err_out_exit; - - e->size = PAGE_SIZE; - e->data = kmalloc(e->size, GFP_KERNEL); - if (!e->data) { - err = -ENOMEM; - goto err_out_free_pages; - } - - if (ctl->hash_algo[0]) { - e->hash = dst_init_hash(ctl, n->hash_key); - if (IS_ERR(e->hash)) { - err = PTR_ERR(e->hash); - e->hash = NULL; - goto err_out_free; - } - } - - if (ctl->cipher_algo[0]) { - e->cipher = dst_init_cipher(ctl, n->cipher_key); - if (IS_ERR(e->cipher)) { - err = PTR_ERR(e->cipher); - e->cipher = NULL; - goto err_out_free_hash; - } - } - - return 0; - -err_out_free_hash: - crypto_free_hash(e->hash); -err_out_free: - kfree(e->data); -err_out_free_pages: - dst_crypto_pages_free(e); -err_out_exit: - return err; -} - -static void dst_crypto_engine_exit(struct dst_crypto_engine *e) -{ - if (e->hash) - crypto_free_hash(e->hash); - if (e->cipher) - crypto_free_ablkcipher(e->cipher); - dst_crypto_pages_free(e); - kfree(e->data); -} - -/* - * Waiting for cipher processing to be completed. - */ -struct dst_crypto_completion { - struct completion complete; - int error; -}; - -static void dst_crypto_complete(struct crypto_async_request *req, int err) -{ - struct dst_crypto_completion *c = req->data; - - if (err == -EINPROGRESS) - return; - - dprintk("%s: req: %p, err: %d.\n", __func__, req, err); - c->error = err; - complete(&c->complete); -} - -static int dst_crypto_process(struct ablkcipher_request *req, - struct scatterlist *sg_dst, struct scatterlist *sg_src, - void *iv, int enc, unsigned long timeout) -{ - struct dst_crypto_completion c; - int err; - - init_completion(&c.complete); - c.error = -EINPROGRESS; - - ablkcipher_request_set_callback(req, CRYPTO_TFM_REQ_MAY_BACKLOG, - dst_crypto_complete, &c); - - ablkcipher_request_set_crypt(req, sg_src, sg_dst, sg_src->length, iv); - - if (enc) - err = crypto_ablkcipher_encrypt(req); - else - err = crypto_ablkcipher_decrypt(req); - - switch (err) { - case -EINPROGRESS: - case -EBUSY: - err = wait_for_completion_interruptible_timeout(&c.complete, - timeout); - if (!err) - err = -ETIMEDOUT; - else - err = c.error; - break; - default: - break; - } - - return err; -} - -/* - * DST uses generic iteration approach for data crypto processing. - * Single block IO request is switched into array of scatterlists, - * which are submitted to the crypto processing iterator. - * - * Input and output iterator initialization are different, since - * in output case we can not encrypt data in-place and need a - * temporary storage, which is then being sent to the remote peer. - */ -static int dst_trans_iter_out(struct bio *bio, struct dst_crypto_engine *e, - int (*iterator) (struct dst_crypto_engine *e, - struct scatterlist *dst, - struct scatterlist *src)) -{ - struct bio_vec *bv; - int err, i; - - sg_init_table(e->src, bio->bi_vcnt); - sg_init_table(e->dst, bio->bi_vcnt); - - bio_for_each_segment(bv, bio, i) { - sg_set_page(&e->src[i], bv->bv_page, bv->bv_len, bv->bv_offset); - sg_set_page(&e->dst[i], e->pages[i], bv->bv_len, bv->bv_offset); - - err = iterator(e, &e->dst[i], &e->src[i]); - if (err) - return err; - } - - return 0; -} - -static int dst_trans_iter_in(struct bio *bio, struct dst_crypto_engine *e, - int (*iterator) (struct dst_crypto_engine *e, - struct scatterlist *dst, - struct scatterlist *src)) -{ - struct bio_vec *bv; - int err, i; - - sg_init_table(e->src, bio->bi_vcnt); - sg_init_table(e->dst, bio->bi_vcnt); - - bio_for_each_segment(bv, bio, i) { - sg_set_page(&e->src[i], bv->bv_page, bv->bv_len, bv->bv_offset); - sg_set_page(&e->dst[i], bv->bv_page, bv->bv_len, bv->bv_offset); - - err = iterator(e, &e->dst[i], &e->src[i]); - if (err) - return err; - } - - return 0; -} - -static int dst_crypt_iterator(struct dst_crypto_engine *e, - struct scatterlist *sg_dst, struct scatterlist *sg_src) -{ - struct ablkcipher_request *req = e->data; - u8 iv[32]; - - memset(iv, 0, sizeof(iv)); - - memcpy(iv, &e->iv, sizeof(e->iv)); - - return dst_crypto_process(req, sg_dst, sg_src, iv, e->enc, e->timeout); -} - -static int dst_crypt(struct dst_crypto_engine *e, struct bio *bio) -{ - struct ablkcipher_request *req = e->data; - - memset(req, 0, sizeof(struct ablkcipher_request)); - ablkcipher_request_set_tfm(req, e->cipher); - - if (e->enc) - return dst_trans_iter_out(bio, e, dst_crypt_iterator); - else - return dst_trans_iter_in(bio, e, dst_crypt_iterator); -} - -static int dst_hash_iterator(struct dst_crypto_engine *e, - struct scatterlist *sg_dst, struct scatterlist *sg_src) -{ - return crypto_hash_update(e->data, sg_src, sg_src->length); -} - -static int dst_hash(struct dst_crypto_engine *e, struct bio *bio, void *dst) -{ - struct hash_desc *desc = e->data; - int err; - - desc->tfm = e->hash; - desc->flags = 0; - - err = crypto_hash_init(desc); - if (err) - return err; - - err = dst_trans_iter_in(bio, e, dst_hash_iterator); - if (err) - return err; - - err = crypto_hash_final(desc, dst); - if (err) - return err; - - return 0; -} - -/* - * Initialize/cleanup a crypto thread. The only thing it should - * do is to allocate a pool of pages as temporary storage. - * And to setup cipher and/or hash. - */ -static void *dst_crypto_thread_init(void *data) -{ - struct dst_node *n = data; - struct dst_crypto_engine *e; - int err = -ENOMEM; - - e = kzalloc(sizeof(struct dst_crypto_engine), GFP_KERNEL); - if (!e) - goto err_out_exit; - e->src = kcalloc(2 * n->max_pages, sizeof(struct scatterlist), - GFP_KERNEL); - if (!e->src) - goto err_out_free; - - e->dst = e->src + n->max_pages; - - err = dst_crypto_engine_init(e, n); - if (err) - goto err_out_free_all; - - return e; - -err_out_free_all: - kfree(e->src); -err_out_free: - kfree(e); -err_out_exit: - return ERR_PTR(err); -} - -static void dst_crypto_thread_cleanup(void *private) -{ - struct dst_crypto_engine *e = private; - - dst_crypto_engine_exit(e); - kfree(e->src); - kfree(e); -} - -/* - * Initialize crypto engine for given node: store keys, create pool - * of threads, initialize each one. - * - * Each thread has unique ID, but 0 and 1 are reserved for receiving and - * accepting threads (if export node), so IDs could start from 2, but starting - * them from 10 allows easily understand what this thread is for. - */ -int dst_node_crypto_init(struct dst_node *n, struct dst_crypto_ctl *ctl) -{ - void *key = (ctl + 1); - int err = -ENOMEM, i; - char name[32]; - - if (ctl->hash_keysize) { - n->hash_key = kmalloc(ctl->hash_keysize, GFP_KERNEL); - if (!n->hash_key) - goto err_out_exit; - memcpy(n->hash_key, key, ctl->hash_keysize); - } - - if (ctl->cipher_keysize) { - n->cipher_key = kmalloc(ctl->cipher_keysize, GFP_KERNEL); - if (!n->cipher_key) - goto err_out_free_hash; - memcpy(n->cipher_key, key, ctl->cipher_keysize); - } - memcpy(&n->crypto, ctl, sizeof(struct dst_crypto_ctl)); - - for (i = 0; i < ctl->thread_num; ++i) { - snprintf(name, sizeof(name), "%s-crypto-%d", n->name, i); - /* Unique ids... */ - err = thread_pool_add_worker(n->pool, name, i + 10, - dst_crypto_thread_init, dst_crypto_thread_cleanup, n); - if (err) - goto err_out_free_threads; - } - - return 0; - -err_out_free_threads: - while (--i >= 0) - thread_pool_del_worker_id(n->pool, i+10); - - if (ctl->cipher_keysize) - kfree(n->cipher_key); - ctl->cipher_keysize = 0; -err_out_free_hash: - if (ctl->hash_keysize) - kfree(n->hash_key); - ctl->hash_keysize = 0; -err_out_exit: - return err; -} - -void dst_node_crypto_exit(struct dst_node *n) -{ - struct dst_crypto_ctl *ctl = &n->crypto; - - if (ctl->cipher_algo[0] || ctl->hash_algo[0]) { - kfree(n->hash_key); - kfree(n->cipher_key); - } -} - -/* - * Thrad pool setup callback. Just stores a transaction in private data. - */ -static int dst_trans_crypto_setup(void *crypto_engine, void *trans) -{ - struct dst_crypto_engine *e = crypto_engine; - - e->private = trans; - return 0; -} - -#if 0 -static void dst_dump_bio(struct bio *bio) -{ - u8 *p; - struct bio_vec *bv; - int i; - - bio_for_each_segment(bv, bio, i) { - dprintk("%s: %llu/%u: size: %u, offset: %u, data: ", - __func__, bio->bi_sector, bio->bi_size, - bv->bv_len, bv->bv_offset); - - p = kmap(bv->bv_page) + bv->bv_offset; - for (i = 0; i < bv->bv_len; ++i) - printk(KERN_DEBUG "%02x ", p[i]); - kunmap(bv->bv_page); - printk("\n"); - } -} -#endif - -/* - * Encrypt/hash data and send it to the network. - */ -static int dst_crypto_process_sending(struct dst_crypto_engine *e, - struct bio *bio, u8 *hash) -{ - int err; - - if (e->cipher) { - err = dst_crypt(e, bio); - if (err) - goto err_out_exit; - } - - if (e->hash) { - err = dst_hash(e, bio, hash); - if (err) - goto err_out_exit; - -#ifdef CONFIG_DST_DEBUG - { - unsigned int i; - - /* dst_dump_bio(bio); */ - - printk(KERN_DEBUG "%s: bio: %llu/%u, rw: %lu, hash: ", - __func__, (u64)bio->bi_sector, - bio->bi_size, bio_data_dir(bio)); - for (i = 0; i < crypto_hash_digestsize(e->hash); ++i) - printk("%02x ", hash[i]); - printk("\n"); - } -#endif - } - - return 0; - -err_out_exit: - return err; -} - -/* - * Check if received data is valid. Decipher if it is. - */ -static int dst_crypto_process_receiving(struct dst_crypto_engine *e, - struct bio *bio, u8 *hash, u8 *recv_hash) -{ - int err; - - if (e->hash) { - int mismatch; - - err = dst_hash(e, bio, hash); - if (err) - goto err_out_exit; - - mismatch = !!memcmp(recv_hash, hash, - crypto_hash_digestsize(e->hash)); -#ifdef CONFIG_DST_DEBUG - /* dst_dump_bio(bio); */ - - printk(KERN_DEBUG "%s: bio: %llu/%u, rw: %lu, hash mismatch: %d", - __func__, (u64)bio->bi_sector, bio->bi_size, - bio_data_dir(bio), mismatch); - if (mismatch) { - unsigned int i; - - printk(", recv/calc: "); - for (i = 0; i < crypto_hash_digestsize(e->hash); ++i) - printk("%02x/%02x ", recv_hash[i], hash[i]); - - } - printk("\n"); -#endif - err = -1; - if (mismatch) - goto err_out_exit; - } - - if (e->cipher) { - err = dst_crypt(e, bio); - if (err) - goto err_out_exit; - } - - return 0; - -err_out_exit: - return err; -} - -/* - * Thread pool callback to encrypt data and send it to the netowork. - */ -static int dst_trans_crypto_action(void *crypto_engine, void *schedule_data) -{ - struct dst_crypto_engine *e = crypto_engine; - struct dst_trans *t = schedule_data; - struct bio *bio = t->bio; - int err; - - dprintk("%s: t: %p, gen: %llu, cipher: %p, hash: %p.\n", - __func__, t, t->gen, e->cipher, e->hash); - - e->enc = t->enc; - e->iv = dst_gen_iv(t); - - if (bio_data_dir(bio) == WRITE) { - err = dst_crypto_process_sending(e, bio, t->cmd.hash); - if (err) - goto err_out_exit; - - if (e->hash) { - t->cmd.csize = crypto_hash_digestsize(e->hash); - t->cmd.size += t->cmd.csize; - } - - return dst_trans_send(t); - } else { - u8 *hash = e->data + e->size/2; - - err = dst_crypto_process_receiving(e, bio, hash, t->cmd.hash); - if (err) - goto err_out_exit; - - dst_trans_remove(t); - dst_trans_put(t); - } - - return 0; - -err_out_exit: - t->error = err; - dst_trans_put(t); - return err; -} - -/* - * Schedule crypto processing for given transaction. - */ -int dst_trans_crypto(struct dst_trans *t) -{ - struct dst_node *n = t->n; - int err; - - err = thread_pool_schedule(n->pool, - dst_trans_crypto_setup, dst_trans_crypto_action, - t, MAX_SCHEDULE_TIMEOUT); - if (err) - goto err_out_exit; - - return 0; - -err_out_exit: - dst_trans_put(t); - return err; -} - -/* - * Crypto machinery for the export node. - */ -static int dst_export_crypto_setup(void *crypto_engine, void *bio) -{ - struct dst_crypto_engine *e = crypto_engine; - - e->private = bio; - return 0; -} - -static int dst_export_crypto_action(void *crypto_engine, void *schedule_data) -{ - struct dst_crypto_engine *e = crypto_engine; - struct bio *bio = schedule_data; - struct dst_export_priv *p = bio->bi_private; - int err; - - dprintk("%s: e: %p, data: %p, bio: %llu/%u, dir: %lu.\n", - __func__, e, e->data, (u64)bio->bi_sector, - bio->bi_size, bio_data_dir(bio)); - - e->enc = (bio_data_dir(bio) == READ); - e->iv = p->cmd.id; - - if (bio_data_dir(bio) == WRITE) { - u8 *hash = e->data + e->size/2; - - err = dst_crypto_process_receiving(e, bio, hash, p->cmd.hash); - if (err) - goto err_out_exit; - - generic_make_request(bio); - } else { - err = dst_crypto_process_sending(e, bio, p->cmd.hash); - if (err) - goto err_out_exit; - - if (e->hash) { - p->cmd.csize = crypto_hash_digestsize(e->hash); - p->cmd.size += p->cmd.csize; - } - - err = dst_export_send_bio(bio); - } - return 0; - -err_out_exit: - bio_put(bio); - return err; -} - -int dst_export_crypto(struct dst_node *n, struct bio *bio) -{ - int err; - - err = thread_pool_schedule(n->pool, - dst_export_crypto_setup, dst_export_crypto_action, - bio, MAX_SCHEDULE_TIMEOUT); - if (err) - goto err_out_exit; - - return 0; - -err_out_exit: - bio_put(bio); - return err; -} diff --git a/drivers/staging/dst/dcore.c b/drivers/staging/dst/dcore.c deleted file mode 100644 index c83ca7e3d048..000000000000 --- a/drivers/staging/dst/dcore.c +++ /dev/null @@ -1,968 +0,0 @@ -/* - * 2007+ Copyright (c) Evgeniy Polyakov <zbr@ioremap.net> - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/blkdev.h> -#include <linux/bio.h> -#include <linux/buffer_head.h> -#include <linux/connector.h> -#include <linux/dst.h> -#include <linux/device.h> -#include <linux/jhash.h> -#include <linux/idr.h> -#include <linux/init.h> -#include <linux/namei.h> -#include <linux/slab.h> -#include <linux/socket.h> - -#include <linux/in.h> -#include <linux/in6.h> - -#include <net/sock.h> - -static int dst_major; - -static DEFINE_MUTEX(dst_hash_lock); -static struct list_head *dst_hashtable; -static unsigned int dst_hashtable_size = 128; -module_param(dst_hashtable_size, uint, 0644); - -static char dst_name[] = "Dementianting goldfish"; - -static DEFINE_IDR(dst_index_idr); -static struct cb_id cn_dst_id = { CN_DST_IDX, CN_DST_VAL }; - -/* - * DST sysfs tree for device called 'storage': - * - * /sys/bus/dst/devices/storage/ - * /sys/bus/dst/devices/storage/type : 192.168.4.80:1025 - * /sys/bus/dst/devices/storage/size : 800 - * /sys/bus/dst/devices/storage/name : storage - */ - -static int dst_dev_match(struct device *dev, struct device_driver *drv) -{ - return 1; -} - -static struct bus_type dst_dev_bus_type = { - .name = "dst", - .match = &dst_dev_match, -}; - -static void dst_node_release(struct device *dev) -{ - struct dst_info *info = container_of(dev, struct dst_info, device); - - kfree(info); -} - -static struct device dst_node_dev = { - .bus = &dst_dev_bus_type, - .release = &dst_node_release -}; - -/* - * Setting size of the node after it was changed. - */ -static void dst_node_set_size(struct dst_node *n) -{ - struct block_device *bdev; - - set_capacity(n->disk, n->size >> 9); - - bdev = bdget_disk(n->disk, 0); - if (bdev) { - mutex_lock(&bdev->bd_inode->i_mutex); - i_size_write(bdev->bd_inode, n->size); - mutex_unlock(&bdev->bd_inode->i_mutex); - bdput(bdev); - } -} - -/* - * Distributed storage request processing function. - */ -static int dst_request(struct request_queue *q, struct bio *bio) -{ - struct dst_node *n = q->queuedata; - int err = -EIO; - - if (bio_empty_barrier(bio) && !blk_queue_discard(q)) { - /* - * This is a dirty^Wnice hack, but if we complete this - * operation with -EOPNOTSUPP like intended, XFS - * will stuck and freeze the machine. This may be - * not particulary XFS problem though, but it is the - * only FS which sends empty barrier at umount time - * I worked with. - * - * Empty barriers are not allowed anyway, see 51fd77bd9f512 - * for example, although later it was changed to - * bio_rw_flagged(bio, BIO_RW_DISCARD) only, which does not - * work in this case. - */ - /* err = -EOPNOTSUPP; */ - err = 0; - goto end_io; - } - - bio_get(bio); - - return dst_process_bio(n, bio); - -end_io: - bio_endio(bio, err); - return err; -} - -/* - * Open/close callbacks for appropriate block device. - */ -static int dst_bdev_open(struct block_device *bdev, fmode_t mode) -{ - struct dst_node *n = bdev->bd_disk->private_data; - - dst_node_get(n); - return 0; -} - -static int dst_bdev_release(struct gendisk *disk, fmode_t mode) -{ - struct dst_node *n = disk->private_data; - - dst_node_put(n); - return 0; -} - -static struct block_device_operations dst_blk_ops = { - .open = dst_bdev_open, - .release = dst_bdev_release, - .owner = THIS_MODULE, -}; - -/* - * Block layer binding - disk is created when array is fully configured - * by userspace request. - */ -static int dst_node_create_disk(struct dst_node *n) -{ - int err = -ENOMEM; - u32 index = 0; - - n->queue = blk_init_queue(NULL, NULL); - if (!n->queue) - goto err_out_exit; - - n->queue->queuedata = n; - blk_queue_make_request(n->queue, dst_request); - blk_queue_max_phys_segments(n->queue, n->max_pages); - blk_queue_max_hw_segments(n->queue, n->max_pages); - - err = -ENOMEM; - n->disk = alloc_disk(1); - if (!n->disk) - goto err_out_free_queue; - - if (!(n->state->permissions & DST_PERM_WRITE)) { - printk(KERN_INFO "DST node %s attached read-only.\n", n->name); - set_disk_ro(n->disk, 1); - } - - if (!idr_pre_get(&dst_index_idr, GFP_KERNEL)) - goto err_out_put; - - mutex_lock(&dst_hash_lock); - err = idr_get_new(&dst_index_idr, NULL, &index); - mutex_unlock(&dst_hash_lock); - if (err) - goto err_out_put; - - n->disk->major = dst_major; - n->disk->first_minor = index; - n->disk->fops = &dst_blk_ops; - n->disk->queue = n->queue; - n->disk->private_data = n; - snprintf(n->disk->disk_name, sizeof(n->disk->disk_name), - "dst-%s", n->name); - - return 0; - -err_out_put: - put_disk(n->disk); -err_out_free_queue: - blk_cleanup_queue(n->queue); -err_out_exit: - return err; -} - -/* - * Sysfs machinery: show device's size. - */ -static ssize_t dst_show_size(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct dst_info *info = container_of(dev, struct dst_info, device); - - return sprintf(buf, "%llu\n", info->size); -} - -/* - * Show local exported device. - */ -static ssize_t dst_show_local(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct dst_info *info = container_of(dev, struct dst_info, device); - - return sprintf(buf, "%s\n", info->local); -} - -/* - * Shows type of the remote node - device major/minor number - * for local nodes and address (af_inet ipv4/ipv6 only) for remote nodes. - */ -static ssize_t dst_show_type(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct dst_info *info = container_of(dev, struct dst_info, device); - int family = info->net.addr.sa_family; - - if (family == AF_INET) { - struct sockaddr_in *sin = (struct sockaddr_in *)&info->net.addr; - return sprintf(buf, "%u.%u.%u.%u:%d\n", - NIPQUAD(sin->sin_addr.s_addr), ntohs(sin->sin_port)); - } else if (family == AF_INET6) { - struct sockaddr_in6 *sin = (struct sockaddr_in6 *) - &info->net.addr; - return sprintf(buf, - "%pi6:%d\n", - &sin->sin6_addr, ntohs(sin->sin6_port)); - } else { - int i, sz = PAGE_SIZE - 2; /* 0 symbol and '\n' below */ - int size, addrlen = info->net.addr.sa_data_len; - unsigned char *a = (unsigned char *)&info->net.addr.sa_data; - char *buf_orig = buf; - - size = snprintf(buf, sz, "family: %d, addrlen: %u, addr: ", - family, addrlen); - sz -= size; - buf += size; - - for (i = 0; i < addrlen; ++i) { - if (sz < 3) - break; - - size = snprintf(buf, sz, "%02x ", a[i]); - sz -= size; - buf += size; - } - buf += sprintf(buf, "\n"); - - return buf - buf_orig; - } - return 0; -} - -static struct device_attribute dst_node_attrs[] = { - __ATTR(size, 0444, dst_show_size, NULL), - __ATTR(type, 0444, dst_show_type, NULL), - __ATTR(local, 0444, dst_show_local, NULL), -}; - -static int dst_create_node_attributes(struct dst_node *n) -{ - int err, i; - - for (i = 0; i < ARRAY_SIZE(dst_node_attrs); ++i) { - err = device_create_file(&n->info->device, - &dst_node_attrs[i]); - if (err) - goto err_out_remove_all; - } - return 0; - -err_out_remove_all: - while (--i >= 0) - device_remove_file(&n->info->device, - &dst_node_attrs[i]); - - return err; -} - -static void dst_remove_node_attributes(struct dst_node *n) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(dst_node_attrs); ++i) - device_remove_file(&n->info->device, - &dst_node_attrs[i]); -} - -/* - * Sysfs cleanup and initialization. - * Shows number of useful parameters. - */ -static void dst_node_sysfs_exit(struct dst_node *n) -{ - if (n->info) { - dst_remove_node_attributes(n); - device_unregister(&n->info->device); - n->info = NULL; - } -} - -static int dst_node_sysfs_init(struct dst_node *n) -{ - int err; - - n->info = kzalloc(sizeof(struct dst_info), GFP_KERNEL); - if (!n->info) - return -ENOMEM; - - memcpy(&n->info->device, &dst_node_dev, sizeof(struct device)); - n->info->size = n->size; - - dev_set_name(&n->info->device, "dst-%s", n->name); - err = device_register(&n->info->device); - if (err) { - dprintk(KERN_ERR "Failed to register node '%s', err: %d.\n", - n->name, err); - goto err_out_exit; - } - - dst_create_node_attributes(n); - - return 0; - -err_out_exit: - kfree(n->info); - n->info = NULL; - return err; -} - -/* - * DST node hash tables machinery. - */ -static inline unsigned int dst_hash(char *str, unsigned int size) -{ - return jhash(str, size, 0) % dst_hashtable_size; -} - -static void dst_node_remove(struct dst_node *n) -{ - mutex_lock(&dst_hash_lock); - list_del_init(&n->node_entry); - mutex_unlock(&dst_hash_lock); -} - -static void dst_node_add(struct dst_node *n) -{ - unsigned hash = dst_hash(n->name, sizeof(n->name)); - - mutex_lock(&dst_hash_lock); - list_add_tail(&n->node_entry, &dst_hashtable[hash]); - mutex_unlock(&dst_hash_lock); -} - -/* - * Cleaning node when it is about to be freed. - * There are still users of the socket though, - * so connection cleanup should be protected. - */ -static void dst_node_cleanup(struct dst_node *n) -{ - struct dst_state *st = n->state; - - if (!st) - return; - - if (n->queue) { - blk_cleanup_queue(n->queue); - - mutex_lock(&dst_hash_lock); - idr_remove(&dst_index_idr, n->disk->first_minor); - mutex_unlock(&dst_hash_lock); - - put_disk(n->disk); - } - - if (n->bdev) { - sync_blockdev(n->bdev); - close_bdev_exclusive(n->bdev, FMODE_READ|FMODE_WRITE); - } - - dst_state_lock(st); - st->need_exit = 1; - dst_state_exit_connected(st); - dst_state_unlock(st); - - wake_up(&st->thread_wait); - - dst_state_put(st); - n->state = NULL; -} - -/* - * Free security attributes attached to given node. - */ -static void dst_security_exit(struct dst_node *n) -{ - struct dst_secure *s, *tmp; - - list_for_each_entry_safe(s, tmp, &n->security_list, sec_entry) { - list_del(&s->sec_entry); - kfree(s); - } -} - -/* - * Free node when there are no more users. - * Actually node has to be freed on behalf od userspace process, - * since there are number of threads, which are embedded in the - * node, so they can not exit and free node from there, that is - * why there is a wakeup if reference counter is not equal to zero. - */ -void dst_node_put(struct dst_node *n) -{ - if (unlikely(!n)) - return; - - dprintk("%s: n: %p, refcnt: %d.\n", - __func__, n, atomic_read(&n->refcnt)); - - if (atomic_dec_and_test(&n->refcnt)) { - dst_node_remove(n); - n->trans_scan_timeout = 0; - dst_node_cleanup(n); - thread_pool_destroy(n->pool); - dst_node_sysfs_exit(n); - dst_node_crypto_exit(n); - dst_security_exit(n); - dst_node_trans_exit(n); - - kfree(n); - - dprintk("%s: freed n: %p.\n", __func__, n); - } else { - wake_up(&n->wait); - } -} - -/* - * Setting up export device: lookup by the name, get its size - * and setup listening socket, which will accept clients, which - * will submit IO for given storage. - */ -static int dst_setup_export(struct dst_node *n, struct dst_ctl *ctl, - struct dst_export_ctl *le) -{ - int err; - - snprintf(n->info->local, sizeof(n->info->local), "%s", le->device); - - n->bdev = open_bdev_exclusive(le->device, FMODE_READ|FMODE_WRITE, NULL); - if (IS_ERR(n->bdev)) - return PTR_ERR(n->bdev); - - if (n->size != 0) - n->size = min_t(loff_t, n->bdev->bd_inode->i_size, n->size); - else - n->size = n->bdev->bd_inode->i_size; - - n->info->size = n->size; - err = dst_node_init_listened(n, le); - if (err) - goto err_out_cleanup; - - return 0; - -err_out_cleanup: - close_bdev_exclusive(n->bdev, FMODE_READ|FMODE_WRITE); - n->bdev = NULL; - - return err; -} - -/* Empty thread pool callbacks for the network processing threads. */ -static inline void *dst_thread_network_init(void *data) -{ - dprintk("%s: data: %p.\n", __func__, data); - return data; -} - -static inline void dst_thread_network_cleanup(void *data) -{ - dprintk("%s: data: %p.\n", __func__, data); -} - -/* - * Allocate DST node and initialize some of its parameters. - */ -static struct dst_node *dst_alloc_node(struct dst_ctl *ctl, - int (*start)(struct dst_node *), - int num) -{ - struct dst_node *n; - int err; - - n = kzalloc(sizeof(struct dst_node), GFP_KERNEL); - if (!n) - return NULL; - - INIT_LIST_HEAD(&n->node_entry); - - INIT_LIST_HEAD(&n->security_list); - mutex_init(&n->security_lock); - - init_waitqueue_head(&n->wait); - - n->trans_scan_timeout = msecs_to_jiffies(ctl->trans_scan_timeout); - if (!n->trans_scan_timeout) - n->trans_scan_timeout = HZ; - - n->trans_max_retries = ctl->trans_max_retries; - if (!n->trans_max_retries) - n->trans_max_retries = 10; - - /* - * Pretty much arbitrary default numbers. - * 32 matches maximum number of pages in bio originated from ext3 (31). - */ - n->max_pages = ctl->max_pages; - if (!n->max_pages) - n->max_pages = 32; - - if (n->max_pages > 1024) - n->max_pages = 1024; - - n->start = start; - n->size = ctl->size; - - atomic_set(&n->refcnt, 1); - atomic_long_set(&n->gen, 0); - snprintf(n->name, sizeof(n->name), "%s", ctl->name); - - err = dst_node_sysfs_init(n); - if (err) - goto err_out_free; - - n->pool = thread_pool_create(num, n->name, dst_thread_network_init, - dst_thread_network_cleanup, n); - if (IS_ERR(n->pool)) { - err = PTR_ERR(n->pool); - goto err_out_sysfs_exit; - } - - dprintk("%s: n: %p, name: %s.\n", __func__, n, n->name); - - return n; - -err_out_sysfs_exit: - dst_node_sysfs_exit(n); -err_out_free: - kfree(n); - return NULL; -} - -/* - * Starting a node, connected to the remote server: - * register block device and initialize transaction mechanism. - * In revers order though. - * - * It will autonegotiate some parameters with the remote node - * and update local if needed. - * - * Transaction initialization should be the last thing before - * starting the node, since transaction should include not only - * block IO, but also crypto related data (if any), which are - * initialized separately. - */ -static int dst_start_remote(struct dst_node *n) -{ - int err; - - err = dst_node_trans_init(n, sizeof(struct dst_trans)); - if (err) - return err; - - err = dst_node_create_disk(n); - if (err) - return err; - - dst_node_set_size(n); - add_disk(n->disk); - - dprintk("DST: started remote node '%s', minor: %d.\n", - n->name, n->disk->first_minor); - - return 0; -} - -/* - * Adding remote node and initialize connection. - */ -static int dst_add_remote(struct dst_node *n, struct dst_ctl *ctl, - void *data, unsigned int size) -{ - int err; - struct dst_network_ctl *rctl = data; - - if (n) - return -EEXIST; - - if (size != sizeof(struct dst_network_ctl)) - return -EINVAL; - - n = dst_alloc_node(ctl, dst_start_remote, 1); - if (!n) - return -ENOMEM; - - memcpy(&n->info->net, rctl, sizeof(struct dst_network_ctl)); - err = dst_node_init_connected(n, rctl); - if (err) - goto err_out_free; - - dst_node_add(n); - - return 0; - -err_out_free: - dst_node_put(n); - return err; -} - -/* - * Adding export node: initializing block device and listening socket. - */ -static int dst_add_export(struct dst_node *n, struct dst_ctl *ctl, - void *data, unsigned int size) -{ - int err; - struct dst_export_ctl *le = data; - - if (n) - return -EEXIST; - - if (size != sizeof(struct dst_export_ctl)) - return -EINVAL; - - n = dst_alloc_node(ctl, dst_start_export, 2); - if (!n) - return -EINVAL; - - err = dst_setup_export(n, ctl, le); - if (err) - goto err_out_free; - - dst_node_add(n); - - return 0; - -err_out_free: - dst_node_put(n); - return err; -} - -static int dst_node_remove_unload(struct dst_node *n) -{ - printk(KERN_INFO "STOPPED name: '%s', size: %llu.\n", - n->name, n->size); - - if (n->disk) - del_gendisk(n->disk); - - dst_node_remove(n); - dst_node_sysfs_exit(n); - - /* - * This is not a hack. Really. - * Node's reference counter allows to implement fine grained - * node freeing, but since all transactions (which hold node's - * reference counter) are processed in the dedicated thread, - * it is possible that reference will hit zero in that thread, - * so we will not be able to exit thread and cleanup the node. - * - * So, we remove disk, so no new activity is possible, and - * wait until all pending transaction are completed (either - * in receiving thread or by timeout in workqueue), in this - * case reference counter will be less or equal to 2 (once set in - * dst_alloc_node() and then in connector message parser; - * or when we force module unloading, and connector message - * parser does not hold a reference, in this case reference - * counter will be equal to 1), - * and subsequent dst_node_put() calls will free the node. - */ - dprintk("%s: going to sleep with %d refcnt.\n", - __func__, atomic_read(&n->refcnt)); - wait_event(n->wait, atomic_read(&n->refcnt) <= 2); - - dst_node_put(n); - return 0; -} - -/* - * Remove node from the hash table. - */ -static int dst_del_node(struct dst_node *n, struct dst_ctl *ctl, - void *data, unsigned int size) -{ - if (!n) - return -ENODEV; - - return dst_node_remove_unload(n); -} - -/* - * Initialize crypto processing for given node. - */ -static int dst_crypto_init(struct dst_node *n, struct dst_ctl *ctl, - void *data, unsigned int size) -{ - struct dst_crypto_ctl *crypto = data; - - if (!n) - return -ENODEV; - - if (size != sizeof(struct dst_crypto_ctl) + crypto->hash_keysize + - crypto->cipher_keysize) - return -EINVAL; - - if (n->trans_cache) - return -EEXIST; - - return dst_node_crypto_init(n, crypto); -} - -/* - * Security attributes for given node. - */ -static int dst_security_init(struct dst_node *n, struct dst_ctl *ctl, - void *data, unsigned int size) -{ - struct dst_secure *s; - - if (!n) - return -ENODEV; - - if (size != sizeof(struct dst_secure_user)) - return -EINVAL; - - s = kmalloc(sizeof(struct dst_secure), GFP_KERNEL); - if (!s) - return -ENOMEM; - - memcpy(&s->sec, data, size); - - mutex_lock(&n->security_lock); - list_add_tail(&s->sec_entry, &n->security_list); - mutex_unlock(&n->security_lock); - - return 0; -} - -/* - * Kill'em all! - */ -static int dst_start_node(struct dst_node *n, struct dst_ctl *ctl, - void *data, unsigned int size) -{ - int err; - - if (!n) - return -ENODEV; - - if (n->trans_cache) - return 0; - - err = n->start(n); - if (err) - return err; - - printk(KERN_INFO "STARTED name: '%s', size: %llu.\n", n->name, n->size); - return 0; -} - -typedef int (*dst_command_func)(struct dst_node *n, struct dst_ctl *ctl, - void *data, unsigned int size); - -/* - * List of userspace commands. - */ -static dst_command_func dst_commands[] = { - [DST_ADD_REMOTE] = &dst_add_remote, - [DST_ADD_EXPORT] = &dst_add_export, - [DST_DEL_NODE] = &dst_del_node, - [DST_CRYPTO] = &dst_crypto_init, - [DST_SECURITY] = &dst_security_init, - [DST_START] = &dst_start_node, -}; - -/* - * Configuration parser. - */ -static void cn_dst_callback(struct cn_msg *msg, struct netlink_skb_parms *nsp) -{ - struct dst_ctl *ctl; - int err; - struct dst_ctl_ack ack; - struct dst_node *n = NULL, *tmp; - unsigned int hash; - - if (!cap_raised(nsp->eff_cap, CAP_SYS_ADMIN)) { - err = -EPERM; - goto out; - } - - if (msg->len < sizeof(struct dst_ctl)) { - err = -EBADMSG; - goto out; - } - - ctl = (struct dst_ctl *)msg->data; - - if (ctl->cmd >= DST_CMD_MAX) { - err = -EINVAL; - goto out; - } - hash = dst_hash(ctl->name, sizeof(ctl->name)); - - mutex_lock(&dst_hash_lock); - list_for_each_entry(tmp, &dst_hashtable[hash], node_entry) { - if (!memcmp(tmp->name, ctl->name, sizeof(tmp->name))) { - n = tmp; - dst_node_get(n); - break; - } - } - mutex_unlock(&dst_hash_lock); - - err = dst_commands[ctl->cmd](n, ctl, msg->data + sizeof(struct dst_ctl), - msg->len - sizeof(struct dst_ctl)); - - dst_node_put(n); -out: - memcpy(&ack.msg, msg, sizeof(struct cn_msg)); - - ack.msg.ack = msg->ack + 1; - ack.msg.len = sizeof(struct dst_ctl_ack) - sizeof(struct cn_msg); - - ack.error = err; - - cn_netlink_send(&ack.msg, 0, GFP_KERNEL); -} - -/* - * Global initialization: sysfs, hash table, block device registration, - * connector and various caches. - */ -static int __init dst_sysfs_init(void) -{ - return bus_register(&dst_dev_bus_type); -} - -static void dst_sysfs_exit(void) -{ - bus_unregister(&dst_dev_bus_type); -} - -static int __init dst_hashtable_init(void) -{ - unsigned int i; - - dst_hashtable = kcalloc(dst_hashtable_size, sizeof(struct list_head), - GFP_KERNEL); - if (!dst_hashtable) - return -ENOMEM; - - for (i = 0; i < dst_hashtable_size; ++i) - INIT_LIST_HEAD(&dst_hashtable[i]); - - return 0; -} - -static void dst_hashtable_exit(void) -{ - unsigned int i; - struct dst_node *n, *tmp; - - for (i = 0; i < dst_hashtable_size; ++i) { - list_for_each_entry_safe(n, tmp, &dst_hashtable[i], node_entry) { - dst_node_remove_unload(n); - } - } - - kfree(dst_hashtable); -} - -static int __init dst_sys_init(void) -{ - int err = -ENOMEM; - - err = dst_hashtable_init(); - if (err) - goto err_out_exit; - - err = dst_export_init(); - if (err) - goto err_out_hashtable_exit; - - err = register_blkdev(dst_major, DST_NAME); - if (err < 0) - goto err_out_export_exit; - if (err) - dst_major = err; - - err = dst_sysfs_init(); - if (err) - goto err_out_unregister; - - err = cn_add_callback(&cn_dst_id, "DST", cn_dst_callback); - if (err) - goto err_out_sysfs_exit; - - printk(KERN_INFO "Distributed storage, '%s' release.\n", dst_name); - - return 0; - -err_out_sysfs_exit: - dst_sysfs_exit(); -err_out_unregister: - unregister_blkdev(dst_major, DST_NAME); -err_out_export_exit: - dst_export_exit(); -err_out_hashtable_exit: - dst_hashtable_exit(); -err_out_exit: - return err; -} - -static void __exit dst_sys_exit(void) -{ - cn_del_callback(&cn_dst_id); - unregister_blkdev(dst_major, DST_NAME); - dst_hashtable_exit(); - dst_sysfs_exit(); - dst_export_exit(); -} - -module_init(dst_sys_init); -module_exit(dst_sys_exit); - -MODULE_DESCRIPTION("Distributed storage"); -MODULE_AUTHOR("Evgeniy Polyakov <zbr@ioremap.net>"); -MODULE_LICENSE("GPL"); diff --git a/drivers/staging/dst/export.c b/drivers/staging/dst/export.c deleted file mode 100644 index c324230e8b60..000000000000 --- a/drivers/staging/dst/export.c +++ /dev/null @@ -1,660 +0,0 @@ -/* - * 2007+ Copyright (c) Evgeniy Polyakov <zbr@ioremap.net> - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/blkdev.h> -#include <linux/bio.h> -#include <linux/dst.h> -#include <linux/in.h> -#include <linux/in6.h> -#include <linux/poll.h> -#include <linux/slab.h> -#include <linux/socket.h> - -#include <net/sock.h> - -/* - * Export bioset is used for server block IO requests. - */ -static struct bio_set *dst_bio_set; - -int __init dst_export_init(void) -{ - int err = -ENOMEM; - - dst_bio_set = bioset_create(32, sizeof(struct dst_export_priv)); - if (!dst_bio_set) - goto err_out_exit; - - return 0; - -err_out_exit: - return err; -} - -void dst_export_exit(void) -{ - bioset_free(dst_bio_set); -} - -/* - * When client connects and autonegotiates with the server node, - * its permissions are checked in a security attributes and sent - * back. - */ -static unsigned int dst_check_permissions(struct dst_state *main, - struct dst_state *st) -{ - struct dst_node *n = main->node; - struct dst_secure *sentry; - struct dst_secure_user *s; - struct saddr *sa = &st->ctl.addr; - unsigned int perm = 0; - - mutex_lock(&n->security_lock); - list_for_each_entry(sentry, &n->security_list, sec_entry) { - s = &sentry->sec; - - if (s->addr.sa_family != sa->sa_family) - continue; - - if (s->addr.sa_data_len != sa->sa_data_len) - continue; - - /* - * This '2' below is a port field. This may be very wrong to do - * in atalk for example though. If there will be any need - * to extent protocol to something else, I can create - * per-family helpers and use them instead of this memcmp. - */ - if (memcmp(s->addr.sa_data + 2, sa->sa_data + 2, - sa->sa_data_len - 2)) - continue; - - perm = s->permissions; - } - mutex_unlock(&n->security_lock); - - return perm; -} - -/* - * Accept new client: allocate appropriate network state and check permissions. - */ -static struct dst_state *dst_accept_client(struct dst_state *st) -{ - unsigned int revents = 0; - unsigned int err_mask = POLLERR | POLLHUP | POLLRDHUP; - unsigned int mask = err_mask | POLLIN; - struct dst_node *n = st->node; - int err = 0; - struct socket *sock = NULL; - struct dst_state *new; - - while (!err && !sock) { - revents = dst_state_poll(st); - - if (!(revents & mask)) { - DEFINE_WAIT(wait); - - for (;;) { - prepare_to_wait(&st->thread_wait, - &wait, TASK_INTERRUPTIBLE); - if (!n->trans_scan_timeout || st->need_exit) - break; - - revents = dst_state_poll(st); - - if (revents & mask) - break; - - if (signal_pending(current)) - break; - - /* - * Magic HZ? Polling check above is not safe in - * all cases (like socket reset in BH context), - * so it is simpler just to postpone it to the - * process context instead of implementing - * special locking there. - */ - schedule_timeout(HZ); - } - finish_wait(&st->thread_wait, &wait); - } - - err = -ECONNRESET; - dst_state_lock(st); - - dprintk("%s: st: %p, revents: %x [err: %d, in: %d].\n", - __func__, st, revents, revents & err_mask, - revents & POLLIN); - - if (revents & err_mask) { - dprintk("%s: revents: %x, socket: %p, err: %d.\n", - __func__, revents, st->socket, err); - err = -ECONNRESET; - } - - if (!n->trans_scan_timeout || st->need_exit) - err = -ENODEV; - - if (st->socket && (revents & POLLIN)) - err = kernel_accept(st->socket, &sock, 0); - - dst_state_unlock(st); - } - - if (err) - goto err_out_exit; - - new = dst_state_alloc(st->node); - if (IS_ERR(new)) { - err = -ENOMEM; - goto err_out_release; - } - new->socket = sock; - - new->ctl.addr.sa_data_len = sizeof(struct sockaddr); - err = kernel_getpeername(sock, (struct sockaddr *)&new->ctl.addr, - (int *)&new->ctl.addr.sa_data_len); - if (err) - goto err_out_put; - - new->permissions = dst_check_permissions(st, new); - if (new->permissions == 0) { - err = -EPERM; - dst_dump_addr(sock, (struct sockaddr *)&new->ctl.addr, - "Client is not allowed to connect"); - goto err_out_put; - } - - err = dst_poll_init(new); - if (err) - goto err_out_put; - - dst_dump_addr(sock, (struct sockaddr *)&new->ctl.addr, - "Connected client"); - - return new; - -err_out_put: - dst_state_put(new); -err_out_release: - sock_release(sock); -err_out_exit: - return ERR_PTR(err); -} - -/* - * Each server's block request sometime finishes. - * Usually it happens in hard irq context of the appropriate controller, - * so to play good with all cases we just queue BIO into the queue - * and wake up processing thread, which gets completed request and - * send (encrypting if needed) it back to the client (if it was a read - * request), or sends back reply that writing successfully completed. - */ -static int dst_export_process_request_queue(struct dst_state *st) -{ - unsigned long flags; - struct dst_export_priv *p = NULL; - struct bio *bio; - int err = 0; - - while (!list_empty(&st->request_list)) { - spin_lock_irqsave(&st->request_lock, flags); - if (!list_empty(&st->request_list)) { - p = list_first_entry(&st->request_list, - struct dst_export_priv, request_entry); - list_del(&p->request_entry); - } - spin_unlock_irqrestore(&st->request_lock, flags); - - if (!p) - break; - - bio = p->bio; - - if (dst_need_crypto(st->node) && (bio_data_dir(bio) == READ)) - err = dst_export_crypto(st->node, bio); - else - err = dst_export_send_bio(bio); - - if (err) - break; - } - - return err; -} - -/* - * Cleanup export state. - * It has to wait until all requests are finished, - * and then free them all. - */ -static void dst_state_cleanup_export(struct dst_state *st) -{ - struct dst_export_priv *p; - unsigned long flags; - - /* - * This loop waits for all pending bios to be completed and freed. - */ - while (atomic_read(&st->refcnt) > 1) { - dprintk("%s: st: %p, refcnt: %d, list_empty: %d.\n", - __func__, st, atomic_read(&st->refcnt), - list_empty(&st->request_list)); - wait_event_timeout(st->thread_wait, - (atomic_read(&st->refcnt) == 1) || - !list_empty(&st->request_list), - HZ/2); - - while (!list_empty(&st->request_list)) { - p = NULL; - spin_lock_irqsave(&st->request_lock, flags); - if (!list_empty(&st->request_list)) { - p = list_first_entry(&st->request_list, - struct dst_export_priv, request_entry); - list_del(&p->request_entry); - } - spin_unlock_irqrestore(&st->request_lock, flags); - - if (p) - bio_put(p->bio); - - dprintk("%s: st: %p, refcnt: %d, list_empty: %d, p: " - "%p.\n", __func__, st, atomic_read(&st->refcnt), - list_empty(&st->request_list), p); - } - } - - dst_state_put(st); -} - -/* - * Client accepting thread. - * Not only accepts new connection, but also schedules receiving thread - * and performs request completion described above. - */ -static int dst_accept(void *init_data, void *schedule_data) -{ - struct dst_state *main_st = schedule_data; - struct dst_node *n = init_data; - struct dst_state *st; - int err; - - while (n->trans_scan_timeout && !main_st->need_exit) { - dprintk("%s: main_st: %p, n: %p.\n", __func__, main_st, n); - st = dst_accept_client(main_st); - if (IS_ERR(st)) - continue; - - err = dst_state_schedule_receiver(st); - if (!err) { - while (n->trans_scan_timeout) { - err = wait_event_interruptible_timeout(st->thread_wait, - !list_empty(&st->request_list) || - !n->trans_scan_timeout || - st->need_exit, - HZ); - - if (!n->trans_scan_timeout || st->need_exit) - break; - - if (list_empty(&st->request_list)) - continue; - - err = dst_export_process_request_queue(st); - if (err) - break; - } - - st->need_exit = 1; - wake_up(&st->thread_wait); - } - - dst_state_cleanup_export(st); - } - - dprintk("%s: freeing listening socket st: %p.\n", __func__, main_st); - - dst_state_lock(main_st); - dst_poll_exit(main_st); - dst_state_socket_release(main_st); - dst_state_unlock(main_st); - dst_state_put(main_st); - dprintk("%s: freed listening socket st: %p.\n", __func__, main_st); - - return 0; -} - -int dst_start_export(struct dst_node *n) -{ - if (list_empty(&n->security_list)) { - printk(KERN_ERR "You are trying to export node '%s' " - "without security attributes.\nNo clients will " - "be allowed to connect. Exiting.\n", n->name); - return -EINVAL; - } - return dst_node_trans_init(n, sizeof(struct dst_export_priv)); -} - -/* - * Initialize listening state and schedule accepting thread. - */ -int dst_node_init_listened(struct dst_node *n, struct dst_export_ctl *le) -{ - struct dst_state *st; - int err = -ENOMEM; - struct dst_network_ctl *ctl = &le->ctl; - - memcpy(&n->info->net, ctl, sizeof(struct dst_network_ctl)); - - st = dst_state_alloc(n); - if (IS_ERR(st)) { - err = PTR_ERR(st); - goto err_out_exit; - } - memcpy(&st->ctl, ctl, sizeof(struct dst_network_ctl)); - - err = dst_state_socket_create(st); - if (err) - goto err_out_put; - - st->socket->sk->sk_reuse = 1; - - err = kernel_bind(st->socket, (struct sockaddr *)&ctl->addr, - ctl->addr.sa_data_len); - if (err) - goto err_out_socket_release; - - err = kernel_listen(st->socket, 1024); - if (err) - goto err_out_socket_release; - n->state = st; - - err = dst_poll_init(st); - if (err) - goto err_out_socket_release; - - dst_state_get(st); - - err = thread_pool_schedule(n->pool, dst_thread_setup, - dst_accept, st, MAX_SCHEDULE_TIMEOUT); - if (err) - goto err_out_poll_exit; - - return 0; - -err_out_poll_exit: - dst_poll_exit(st); -err_out_socket_release: - dst_state_socket_release(st); -err_out_put: - dst_state_put(st); -err_out_exit: - n->state = NULL; - return err; -} - -/* - * Free bio and related private data. - * Also drop a reference counter for appropriate state, - * which waits when there are no more block IOs in-flight. - */ -static void dst_bio_destructor(struct bio *bio) -{ - struct bio_vec *bv; - struct dst_export_priv *priv = bio->bi_private; - int i; - - bio_for_each_segment(bv, bio, i) { - if (!bv->bv_page) - break; - - __free_page(bv->bv_page); - } - - if (priv) - dst_state_put(priv->state); - bio_free(bio, dst_bio_set); -} - -/* - * Block IO completion. Queue request to be sent back to - * the client (or just confirmation). - */ -static void dst_bio_end_io(struct bio *bio, int err) -{ - struct dst_export_priv *p = bio->bi_private; - struct dst_state *st = p->state; - unsigned long flags; - - spin_lock_irqsave(&st->request_lock, flags); - list_add_tail(&p->request_entry, &st->request_list); - spin_unlock_irqrestore(&st->request_lock, flags); - - wake_up(&st->thread_wait); -} - -/* - * Allocate read request for the server. - */ -static int dst_export_read_request(struct bio *bio, unsigned int total_size) -{ - unsigned int size; - struct page *page; - int err; - - while (total_size) { - err = -ENOMEM; - page = alloc_page(GFP_KERNEL); - if (!page) - goto err_out_exit; - - size = min_t(unsigned int, PAGE_SIZE, total_size); - - err = bio_add_page(bio, page, size, 0); - dprintk("%s: bio: %llu/%u, size: %u, err: %d.\n", - __func__, (u64)bio->bi_sector, bio->bi_size, - size, err); - if (err <= 0) - goto err_out_free_page; - - total_size -= size; - } - - return 0; - -err_out_free_page: - __free_page(page); -err_out_exit: - return err; -} - -/* - * Allocate write request for the server. - * Should not only get pages, but also read data from the network. - */ -static int dst_export_write_request(struct dst_state *st, - struct bio *bio, unsigned int total_size) -{ - unsigned int size; - struct page *page; - void *data; - int err; - - while (total_size) { - err = -ENOMEM; - page = alloc_page(GFP_KERNEL); - if (!page) - goto err_out_exit; - - data = kmap(page); - if (!data) - goto err_out_free_page; - - size = min_t(unsigned int, PAGE_SIZE, total_size); - - err = dst_data_recv(st, data, size); - if (err) - goto err_out_unmap_page; - - err = bio_add_page(bio, page, size, 0); - if (err <= 0) - goto err_out_unmap_page; - - kunmap(page); - - total_size -= size; - } - - return 0; - -err_out_unmap_page: - kunmap(page); -err_out_free_page: - __free_page(page); -err_out_exit: - return err; -} - -/* - * Groovy, we've gotten an IO request from the client. - * Allocate BIO from the bioset, private data from the mempool - * and lots of pages for IO. - */ -int dst_process_io(struct dst_state *st) -{ - struct dst_node *n = st->node; - struct dst_cmd *cmd = st->data; - struct bio *bio; - struct dst_export_priv *priv; - int err = -ENOMEM; - - if (unlikely(!n->bdev)) { - err = -EINVAL; - goto err_out_exit; - } - - bio = bio_alloc_bioset(GFP_KERNEL, - PAGE_ALIGN(cmd->size) >> PAGE_SHIFT, - dst_bio_set); - if (!bio) - goto err_out_exit; - - priv = (struct dst_export_priv *)(((void *)bio) - - sizeof (struct dst_export_priv)); - - priv->state = dst_state_get(st); - priv->bio = bio; - - bio->bi_private = priv; - bio->bi_end_io = dst_bio_end_io; - bio->bi_destructor = dst_bio_destructor; - bio->bi_bdev = n->bdev; - - /* - * Server side is only interested in two low bits: - * uptodate (set by itself actually) and rw block - */ - bio->bi_flags |= cmd->flags & 3; - - bio->bi_rw = cmd->rw; - bio->bi_size = 0; - bio->bi_sector = cmd->sector; - - dst_bio_to_cmd(bio, &priv->cmd, DST_IO_RESPONSE, cmd->id); - - priv->cmd.flags = 0; - priv->cmd.size = cmd->size; - - if (bio_data_dir(bio) == WRITE) { - err = dst_recv_cdata(st, priv->cmd.hash); - if (err) - goto err_out_free; - - err = dst_export_write_request(st, bio, cmd->size); - if (err) - goto err_out_free; - - if (dst_need_crypto(n)) - return dst_export_crypto(n, bio); - } else { - err = dst_export_read_request(bio, cmd->size); - if (err) - goto err_out_free; - } - - dprintk("%s: bio: %llu/%u, rw: %lu, dir: %lu, flags: %lx, phys: %d.\n", - __func__, (u64)bio->bi_sector, bio->bi_size, - bio->bi_rw, bio_data_dir(bio), - bio->bi_flags, bio->bi_phys_segments); - - generic_make_request(bio); - - return 0; - -err_out_free: - bio_put(bio); -err_out_exit: - return err; -} - -/* - * Ok, block IO is ready, let's send it back to the client... - */ -int dst_export_send_bio(struct bio *bio) -{ - struct dst_export_priv *p = bio->bi_private; - struct dst_state *st = p->state; - struct dst_cmd *cmd = &p->cmd; - int err; - - dprintk("%s: id: %llu, bio: %llu/%u, csize: %u, flags: %lu, rw: %lu.\n", - __func__, cmd->id, (u64)bio->bi_sector, bio->bi_size, - cmd->csize, bio->bi_flags, bio->bi_rw); - - dst_convert_cmd(cmd); - - dst_state_lock(st); - if (!st->socket) { - err = -ECONNRESET; - goto err_out_unlock; - } - - if (bio_data_dir(bio) == WRITE) { - /* ... or just confirmation that writing has completed. */ - cmd->size = cmd->csize = 0; - err = dst_data_send_header(st->socket, cmd, - sizeof(struct dst_cmd), 0); - if (err) - goto err_out_unlock; - } else { - err = dst_send_bio(st, cmd, bio); - if (err) - goto err_out_unlock; - } - - dst_state_unlock(st); - - bio_put(bio); - return 0; - -err_out_unlock: - dst_state_unlock(st); - - bio_put(bio); - return err; -} diff --git a/drivers/staging/dst/state.c b/drivers/staging/dst/state.c deleted file mode 100644 index 02a05e6c48c3..000000000000 --- a/drivers/staging/dst/state.c +++ /dev/null @@ -1,844 +0,0 @@ -/* - * 2007+ Copyright (c) Evgeniy Polyakov <zbr@ioremap.net> - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/buffer_head.h> -#include <linux/blkdev.h> -#include <linux/bio.h> -#include <linux/connector.h> -#include <linux/dst.h> -#include <linux/device.h> -#include <linux/in.h> -#include <linux/in6.h> -#include <linux/socket.h> -#include <linux/slab.h> - -#include <net/sock.h> - -/* - * Polling machinery. - */ - -struct dst_poll_helper { - poll_table pt; - struct dst_state *st; -}; - -static int dst_queue_wake(wait_queue_t *wait, unsigned mode, - int sync, void *key) -{ - struct dst_state *st = container_of(wait, struct dst_state, wait); - - wake_up(&st->thread_wait); - return 1; -} - -static void dst_queue_func(struct file *file, wait_queue_head_t *whead, - poll_table *pt) -{ - struct dst_state *st = container_of(pt, struct dst_poll_helper, pt)->st; - - st->whead = whead; - init_waitqueue_func_entry(&st->wait, dst_queue_wake); - add_wait_queue(whead, &st->wait); -} - -void dst_poll_exit(struct dst_state *st) -{ - if (st->whead) { - remove_wait_queue(st->whead, &st->wait); - st->whead = NULL; - } -} - -int dst_poll_init(struct dst_state *st) -{ - struct dst_poll_helper ph; - - ph.st = st; - init_poll_funcptr(&ph.pt, &dst_queue_func); - - st->socket->ops->poll(NULL, st->socket, &ph.pt); - return 0; -} - -/* - * Header receiving function - may block. - */ -static int dst_data_recv_header(struct socket *sock, - void *data, unsigned int size, int block) -{ - struct msghdr msg; - struct kvec iov; - int err; - - iov.iov_base = data; - iov.iov_len = size; - - msg.msg_iov = (struct iovec *)&iov; - msg.msg_iovlen = 1; - msg.msg_name = NULL; - msg.msg_namelen = 0; - msg.msg_control = NULL; - msg.msg_controllen = 0; - msg.msg_flags = (block) ? MSG_WAITALL : MSG_DONTWAIT; - - err = kernel_recvmsg(sock, &msg, &iov, 1, iov.iov_len, - msg.msg_flags); - if (err != size) - return -1; - - return 0; -} - -/* - * Header sending function - may block. - */ -int dst_data_send_header(struct socket *sock, - void *data, unsigned int size, int more) -{ - struct msghdr msg; - struct kvec iov; - int err; - - iov.iov_base = data; - iov.iov_len = size; - - msg.msg_iov = (struct iovec *)&iov; - msg.msg_iovlen = 1; - msg.msg_name = NULL; - msg.msg_namelen = 0; - msg.msg_control = NULL; - msg.msg_controllen = 0; - msg.msg_flags = MSG_WAITALL | (more ? MSG_MORE : 0); - - err = kernel_sendmsg(sock, &msg, &iov, 1, iov.iov_len); - if (err != size) { - dprintk("%s: size: %u, more: %d, err: %d.\n", - __func__, size, more, err); - return -1; - } - - return 0; -} - -/* - * Block autoconfiguration: request size of the storage and permissions. - */ -static int dst_request_remote_config(struct dst_state *st) -{ - struct dst_node *n = st->node; - int err = -EINVAL; - struct dst_cmd *cmd = st->data; - - memset(cmd, 0, sizeof(struct dst_cmd)); - cmd->cmd = DST_CFG; - - dst_convert_cmd(cmd); - - err = dst_data_send_header(st->socket, cmd, sizeof(struct dst_cmd), 0); - if (err) - goto out; - - err = dst_data_recv_header(st->socket, cmd, sizeof(struct dst_cmd), 1); - if (err) - goto out; - - dst_convert_cmd(cmd); - - if (cmd->cmd != DST_CFG) { - err = -EINVAL; - dprintk("%s: checking result: cmd: %d, size reported: %llu.\n", - __func__, cmd->cmd, cmd->sector); - goto out; - } - - if (n->size != 0) - n->size = min_t(loff_t, n->size, cmd->sector); - else - n->size = cmd->sector; - - n->info->size = n->size; - st->permissions = cmd->rw; - -out: - dprintk("%s: n: %p, err: %d, size: %llu, permission: %x.\n", - __func__, n, err, n->size, st->permissions); - return err; -} - -/* - * Socket machinery. - */ - -#define DST_DEFAULT_TIMEO 20000 - -int dst_state_socket_create(struct dst_state *st) -{ - int err; - struct socket *sock; - struct dst_network_ctl *ctl = &st->ctl; - - err = sock_create(ctl->addr.sa_family, ctl->type, ctl->proto, &sock); - if (err < 0) - return err; - - sock->sk->sk_sndtimeo = sock->sk->sk_rcvtimeo = - msecs_to_jiffies(DST_DEFAULT_TIMEO); - sock->sk->sk_allocation = GFP_NOIO; - - st->socket = st->read_socket = sock; - return 0; -} - -void dst_state_socket_release(struct dst_state *st) -{ - dprintk("%s: st: %p, socket: %p, n: %p.\n", - __func__, st, st->socket, st->node); - if (st->socket) { - sock_release(st->socket); - st->socket = NULL; - st->read_socket = NULL; - } -} - -void dst_dump_addr(struct socket *sk, struct sockaddr *sa, char *str) -{ - if (sk->ops->family == AF_INET) { - struct sockaddr_in *sin = (struct sockaddr_in *)sa; - printk(KERN_INFO "%s %u.%u.%u.%u:%d.\n", str, - NIPQUAD(sin->sin_addr.s_addr), ntohs(sin->sin_port)); - } else if (sk->ops->family == AF_INET6) { - struct sockaddr_in6 *sin = (struct sockaddr_in6 *)sa; - printk(KERN_INFO "%s %pi6:%d", - str, &sin->sin6_addr, ntohs(sin->sin6_port)); - } -} - -void dst_state_exit_connected(struct dst_state *st) -{ - if (st->socket) { - dst_poll_exit(st); - st->socket->ops->shutdown(st->socket, 2); - - dst_dump_addr(st->socket, (struct sockaddr *)&st->ctl.addr, - "Disconnected peer"); - dst_state_socket_release(st); - } -} - -static int dst_state_init_connected(struct dst_state *st) -{ - int err; - struct dst_network_ctl *ctl = &st->ctl; - - err = dst_state_socket_create(st); - if (err) - goto err_out_exit; - - err = kernel_connect(st->socket, (struct sockaddr *)&st->ctl.addr, - st->ctl.addr.sa_data_len, 0); - if (err) - goto err_out_release; - - err = dst_poll_init(st); - if (err) - goto err_out_release; - - dst_dump_addr(st->socket, (struct sockaddr *)&ctl->addr, - "Connected to peer"); - - return 0; - -err_out_release: - dst_state_socket_release(st); -err_out_exit: - return err; -} - -/* - * State reset is used to reconnect to the remote peer. - * May fail, but who cares, we will try again later. - */ -static inline void dst_state_reset_nolock(struct dst_state *st) -{ - dst_state_exit_connected(st); - dst_state_init_connected(st); -} - -static inline void dst_state_reset(struct dst_state *st) -{ - dst_state_lock(st); - dst_state_reset_nolock(st); - dst_state_unlock(st); -} - -/* - * Basic network sending/receiving functions. - * Blocked mode is used. - */ -static int dst_data_recv_raw(struct dst_state *st, void *buf, u64 size) -{ - struct msghdr msg; - struct kvec iov; - int err; - - BUG_ON(!size); - - iov.iov_base = buf; - iov.iov_len = size; - - msg.msg_iov = (struct iovec *)&iov; - msg.msg_iovlen = 1; - msg.msg_name = NULL; - msg.msg_namelen = 0; - msg.msg_control = NULL; - msg.msg_controllen = 0; - msg.msg_flags = MSG_DONTWAIT; - - err = kernel_recvmsg(st->socket, &msg, &iov, 1, iov.iov_len, - msg.msg_flags); - if (err <= 0) { - dprintk("%s: failed to recv data: size: %llu, err: %d.\n", - __func__, size, err); - if (err == 0) - err = -ECONNRESET; - - dst_state_exit_connected(st); - } - - return err; -} - -/* - * Ping command to early detect failed nodes. - */ -static int dst_send_ping(struct dst_state *st) -{ - struct dst_cmd *cmd = st->data; - int err = -ECONNRESET; - - dst_state_lock(st); - if (st->socket) { - memset(cmd, 0, sizeof(struct dst_cmd)); - - cmd->cmd = __cpu_to_be32(DST_PING); - - err = dst_data_send_header(st->socket, cmd, - sizeof(struct dst_cmd), 0); - } - dprintk("%s: st: %p, socket: %p, err: %d.\n", __func__, - st, st->socket, err); - dst_state_unlock(st); - - return err; -} - -/* - * Receiving function, which should either return error or read - * whole block request. If there was no traffic for a one second, - * send a ping, since remote node may die. - */ -int dst_data_recv(struct dst_state *st, void *data, unsigned int size) -{ - unsigned int revents = 0; - unsigned int err_mask = POLLERR | POLLHUP | POLLRDHUP; - unsigned int mask = err_mask | POLLIN; - struct dst_node *n = st->node; - int err = 0; - - while (size && !err) { - revents = dst_state_poll(st); - - if (!(revents & mask)) { - DEFINE_WAIT(wait); - - for (;;) { - prepare_to_wait(&st->thread_wait, &wait, - TASK_INTERRUPTIBLE); - if (!n->trans_scan_timeout || st->need_exit) - break; - - revents = dst_state_poll(st); - - if (revents & mask) - break; - - if (signal_pending(current)) - break; - - if (!schedule_timeout(HZ)) { - err = dst_send_ping(st); - if (err) - return err; - } - - continue; - } - finish_wait(&st->thread_wait, &wait); - } - - err = -ECONNRESET; - dst_state_lock(st); - - if (st->socket && (st->read_socket == st->socket) && - (revents & POLLIN)) { - err = dst_data_recv_raw(st, data, size); - if (err > 0) { - data += err; - size -= err; - err = 0; - } - } - - if (revents & err_mask || !st->socket) { - dprintk("%s: revents: %x, socket: %p, size: %u, " - "err: %d.\n", __func__, revents, - st->socket, size, err); - err = -ECONNRESET; - } - - dst_state_unlock(st); - - if (!n->trans_scan_timeout) - err = -ENODEV; - } - - return err; -} - -/* - * Send block autoconf reply. - */ -static int dst_process_cfg(struct dst_state *st) -{ - struct dst_node *n = st->node; - struct dst_cmd *cmd = st->data; - int err; - - cmd->sector = n->size; - cmd->rw = st->permissions; - - dst_convert_cmd(cmd); - - dst_state_lock(st); - err = dst_data_send_header(st->socket, cmd, sizeof(struct dst_cmd), 0); - dst_state_unlock(st); - - return err; -} - -/* - * Receive block IO from the network. - */ -static int dst_recv_bio(struct dst_state *st, struct bio *bio, - unsigned int total_size) -{ - struct bio_vec *bv; - int i, err; - void *data; - unsigned int sz; - - bio_for_each_segment(bv, bio, i) { - sz = min(total_size, bv->bv_len); - - dprintk("%s: bio: %llu/%u, total: %u, len: %u, sz: %u, " - "off: %u.\n", __func__, (u64)bio->bi_sector, - bio->bi_size, total_size, bv->bv_len, sz, - bv->bv_offset); - - data = kmap(bv->bv_page) + bv->bv_offset; - err = dst_data_recv(st, data, sz); - kunmap(bv->bv_page); - - bv->bv_len = sz; - - if (err) - return err; - - total_size -= sz; - if (total_size == 0) - break; - } - - return 0; -} - -/* - * Our block IO has just completed and arrived: get it. - */ -static int dst_process_io_response(struct dst_state *st) -{ - struct dst_node *n = st->node; - struct dst_cmd *cmd = st->data; - struct dst_trans *t; - int err = 0; - struct bio *bio; - - mutex_lock(&n->trans_lock); - t = dst_trans_search(n, cmd->id); - mutex_unlock(&n->trans_lock); - - if (!t) - goto err_out_exit; - - bio = t->bio; - - dprintk("%s: bio: %llu/%u, cmd_size: %u, csize: %u, dir: %lu.\n", - __func__, (u64)bio->bi_sector, bio->bi_size, cmd->size, - cmd->csize, bio_data_dir(bio)); - - if (bio_data_dir(bio) == READ) { - if (bio->bi_size != cmd->size - cmd->csize) - goto err_out_exit; - - if (dst_need_crypto(n)) { - err = dst_recv_cdata(st, t->cmd.hash); - if (err) - goto err_out_exit; - } - - err = dst_recv_bio(st, t->bio, bio->bi_size); - if (err) - goto err_out_exit; - - if (dst_need_crypto(n)) - return dst_trans_crypto(t); - } else { - err = -EBADMSG; - if (cmd->size || cmd->csize) - goto err_out_exit; - } - - dst_trans_remove(t); - dst_trans_put(t); - - return 0; - -err_out_exit: - return err; -} - -/* - * Receive crypto data. - */ -int dst_recv_cdata(struct dst_state *st, void *cdata) -{ - struct dst_cmd *cmd = st->data; - struct dst_node *n = st->node; - struct dst_crypto_ctl *c = &n->crypto; - int err; - - if (cmd->csize != c->crypto_attached_size) { - dprintk("%s: cmd: cmd: %u, sector: %llu, size: %u, " - "csize: %u != digest size %u.\n", - __func__, cmd->cmd, cmd->sector, cmd->size, - cmd->csize, c->crypto_attached_size); - err = -EINVAL; - goto err_out_exit; - } - - err = dst_data_recv(st, cdata, cmd->csize); - if (err) - goto err_out_exit; - - cmd->size -= cmd->csize; - return 0; - -err_out_exit: - return err; -} - -/* - * Receive the command and start its processing. - */ -static int dst_recv_processing(struct dst_state *st) -{ - int err = -EINTR; - struct dst_cmd *cmd = st->data; - - /* - * If socket will be reset after this statement, then - * dst_data_recv() will just fail and loop will - * start again, so it can be done without any locks. - * - * st->read_socket is needed to prevents state machine - * breaking between this data reading and subsequent one - * in protocol specific functions during connection reset. - * In case of reset we have to read next command and do - * not expect data for old command to magically appear in - * new connection. - */ - st->read_socket = st->socket; - err = dst_data_recv(st, cmd, sizeof(struct dst_cmd)); - if (err) - goto out_exit; - - dst_convert_cmd(cmd); - - dprintk("%s: cmd: %u, size: %u, csize: %u, id: %llu, " - "sector: %llu, flags: %llx, rw: %llx.\n", - __func__, cmd->cmd, cmd->size, - cmd->csize, cmd->id, cmd->sector, - cmd->flags, cmd->rw); - - /* - * This should catch protocol breakage and random garbage - * instead of commands. - */ - if (unlikely(cmd->csize > st->size - sizeof(struct dst_cmd))) { - err = -EBADMSG; - goto out_exit; - } - - err = -EPROTO; - switch (cmd->cmd) { - case DST_IO_RESPONSE: - err = dst_process_io_response(st); - break; - case DST_IO: - err = dst_process_io(st); - break; - case DST_CFG: - err = dst_process_cfg(st); - break; - case DST_PING: - err = 0; - break; - default: - break; - } - -out_exit: - return err; -} - -/* - * Receiving thread. For the client node we should try to reconnect, - * for accepted client we just drop the state and expect it to reconnect. - */ -static int dst_recv(void *init_data, void *schedule_data) -{ - struct dst_state *st = schedule_data; - struct dst_node *n = init_data; - int err = 0; - - dprintk("%s: start st: %p, n: %p, scan: %lu, need_exit: %d.\n", - __func__, st, n, n->trans_scan_timeout, st->need_exit); - - while (n->trans_scan_timeout && !st->need_exit) { - err = dst_recv_processing(st); - if (err < 0) { - if (!st->ctl.type) - break; - - if (!n->trans_scan_timeout || st->need_exit) - break; - - dst_state_reset(st); - msleep(1000); - } - } - - st->need_exit = 1; - wake_up(&st->thread_wait); - - dprintk("%s: freeing receiving socket st: %p.\n", __func__, st); - dst_state_lock(st); - dst_state_exit_connected(st); - dst_state_unlock(st); - dst_state_put(st); - - dprintk("%s: freed receiving socket st: %p.\n", __func__, st); - - return err; -} - -/* - * Network state dies here and borns couple of lines below. - * This object is the main network state processing engine: - * sending, receiving, reconnections, all network related - * tasks are handled on behalf of the state. - */ -static void dst_state_free(struct dst_state *st) -{ - dprintk("%s: st: %p.\n", __func__, st); - if (st->cleanup) - st->cleanup(st); - kfree(st->data); - kfree(st); -} - -struct dst_state *dst_state_alloc(struct dst_node *n) -{ - struct dst_state *st; - int err = -ENOMEM; - - st = kzalloc(sizeof(struct dst_state), GFP_KERNEL); - if (!st) - goto err_out_exit; - - st->node = n; - st->need_exit = 0; - - st->size = PAGE_SIZE; - st->data = kmalloc(st->size, GFP_KERNEL); - if (!st->data) - goto err_out_free; - - spin_lock_init(&st->request_lock); - INIT_LIST_HEAD(&st->request_list); - - mutex_init(&st->state_lock); - init_waitqueue_head(&st->thread_wait); - - /* - * One for processing thread, another one for node itself. - */ - atomic_set(&st->refcnt, 2); - - dprintk("%s: st: %p, n: %p.\n", __func__, st, st->node); - - return st; - -err_out_free: - kfree(st); -err_out_exit: - return ERR_PTR(err); -} - -int dst_state_schedule_receiver(struct dst_state *st) -{ - return thread_pool_schedule_private(st->node->pool, dst_thread_setup, - dst_recv, st, MAX_SCHEDULE_TIMEOUT, st->node); -} - -/* - * Initialize client's connection to the remote peer: allocate state, - * connect and perform block IO autoconfiguration. - */ -int dst_node_init_connected(struct dst_node *n, struct dst_network_ctl *r) -{ - struct dst_state *st; - int err = -ENOMEM; - - st = dst_state_alloc(n); - if (IS_ERR(st)) { - err = PTR_ERR(st); - goto err_out_exit; - } - memcpy(&st->ctl, r, sizeof(struct dst_network_ctl)); - - err = dst_state_init_connected(st); - if (err) - goto err_out_free_data; - - err = dst_request_remote_config(st); - if (err) - goto err_out_exit_connected; - n->state = st; - - err = dst_state_schedule_receiver(st); - if (err) - goto err_out_exit_connected; - - return 0; - -err_out_exit_connected: - dst_state_exit_connected(st); -err_out_free_data: - dst_state_free(st); -err_out_exit: - n->state = NULL; - return err; -} - -void dst_state_put(struct dst_state *st) -{ - dprintk("%s: st: %p, refcnt: %d.\n", - __func__, st, atomic_read(&st->refcnt)); - if (atomic_dec_and_test(&st->refcnt)) - dst_state_free(st); -} - -/* - * Send block IO to the network one by one using zero-copy ->sendpage(). - */ -int dst_send_bio(struct dst_state *st, struct dst_cmd *cmd, struct bio *bio) -{ - struct bio_vec *bv; - struct dst_crypto_ctl *c = &st->node->crypto; - int err, i = 0; - int flags = MSG_WAITALL; - - err = dst_data_send_header(st->socket, cmd, - sizeof(struct dst_cmd) + c->crypto_attached_size, bio->bi_vcnt); - if (err) - goto err_out_exit; - - bio_for_each_segment(bv, bio, i) { - if (i < bio->bi_vcnt - 1) - flags |= MSG_MORE; - - err = kernel_sendpage(st->socket, bv->bv_page, bv->bv_offset, - bv->bv_len, flags); - if (err <= 0) - goto err_out_exit; - } - - return 0; - -err_out_exit: - dprintk("%s: %d/%d, flags: %x, err: %d.\n", - __func__, i, bio->bi_vcnt, flags, err); - return err; -} - -/* - * Send transaction to the remote peer. - */ -int dst_trans_send(struct dst_trans *t) -{ - int err; - struct dst_state *st = t->n->state; - struct bio *bio = t->bio; - - dst_convert_cmd(&t->cmd); - - dst_state_lock(st); - if (!st->socket) { - err = dst_state_init_connected(st); - if (err) - goto err_out_unlock; - } - - if (bio_data_dir(bio) == WRITE) { - err = dst_send_bio(st, &t->cmd, t->bio); - } else { - err = dst_data_send_header(st->socket, &t->cmd, - sizeof(struct dst_cmd), 0); - } - if (err) - goto err_out_reset; - - dst_state_unlock(st); - return 0; - -err_out_reset: - dst_state_reset_nolock(st); -err_out_unlock: - dst_state_unlock(st); - - return err; -} diff --git a/drivers/staging/dst/thread_pool.c b/drivers/staging/dst/thread_pool.c deleted file mode 100644 index 29a82b2602f3..000000000000 --- a/drivers/staging/dst/thread_pool.c +++ /dev/null @@ -1,348 +0,0 @@ -/* - * 2007+ Copyright (c) Evgeniy Polyakov <zbr@ioremap.net> - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/kernel.h> -#include <linux/dst.h> -#include <linux/kthread.h> -#include <linux/slab.h> - -/* - * Thread pool abstraction allows to schedule a work to be performed - * on behalf of kernel thread. One does not operate with threads itself, - * instead user provides setup and cleanup callbacks for thread pool itself, - * and action and cleanup callbacks for each submitted work. - * - * Each worker has private data initialized at creation time and data, - * provided by user at scheduling time. - * - * When action is being performed, thread can not be used by other users, - * instead they will sleep until there is free thread to pick their work. - */ -struct thread_pool_worker { - struct list_head worker_entry; - - struct task_struct *thread; - - struct thread_pool *pool; - - int error; - int has_data; - int need_exit; - unsigned int id; - - wait_queue_head_t wait; - - void *private; - void *schedule_data; - - int (*action)(void *private, void *schedule_data); - void (*cleanup)(void *private); -}; - -static void thread_pool_exit_worker(struct thread_pool_worker *w) -{ - kthread_stop(w->thread); - - w->cleanup(w->private); - kfree(w); -} - -/* - * Called to mark thread as ready and allow users to schedule new work. - */ -static void thread_pool_worker_make_ready(struct thread_pool_worker *w) -{ - struct thread_pool *p = w->pool; - - mutex_lock(&p->thread_lock); - - if (!w->need_exit) { - list_move_tail(&w->worker_entry, &p->ready_list); - w->has_data = 0; - mutex_unlock(&p->thread_lock); - - wake_up(&p->wait); - } else { - p->thread_num--; - list_del(&w->worker_entry); - mutex_unlock(&p->thread_lock); - - thread_pool_exit_worker(w); - } -} - -/* - * Thread action loop: waits until there is new work. - */ -static int thread_pool_worker_func(void *data) -{ - struct thread_pool_worker *w = data; - - while (!kthread_should_stop()) { - wait_event_interruptible(w->wait, - kthread_should_stop() || w->has_data); - - if (kthread_should_stop()) - break; - - if (!w->has_data) - continue; - - w->action(w->private, w->schedule_data); - thread_pool_worker_make_ready(w); - } - - return 0; -} - -/* - * Remove single worker without specifying which one. - */ -void thread_pool_del_worker(struct thread_pool *p) -{ - struct thread_pool_worker *w = NULL; - - while (!w && p->thread_num) { - wait_event(p->wait, !list_empty(&p->ready_list) || - !p->thread_num); - - dprintk("%s: locking list_empty: %d, thread_num: %d.\n", - __func__, list_empty(&p->ready_list), - p->thread_num); - - mutex_lock(&p->thread_lock); - if (!list_empty(&p->ready_list)) { - w = list_first_entry(&p->ready_list, - struct thread_pool_worker, - worker_entry); - - dprintk("%s: deleting w: %p, thread_num: %d, " - "list: %p [%p.%p].\n", __func__, - w, p->thread_num, &p->ready_list, - p->ready_list.prev, p->ready_list.next); - - p->thread_num--; - list_del(&w->worker_entry); - } - mutex_unlock(&p->thread_lock); - } - - if (w) - thread_pool_exit_worker(w); - dprintk("%s: deleted w: %p, thread_num: %d.\n", - __func__, w, p->thread_num); -} - -/* - * Remove a worker with given ID. - */ -void thread_pool_del_worker_id(struct thread_pool *p, unsigned int id) -{ - struct thread_pool_worker *w; - int found = 0; - - mutex_lock(&p->thread_lock); - list_for_each_entry(w, &p->ready_list, worker_entry) { - if (w->id == id) { - found = 1; - p->thread_num--; - list_del(&w->worker_entry); - break; - } - } - - if (!found) { - list_for_each_entry(w, &p->active_list, worker_entry) { - if (w->id == id) { - w->need_exit = 1; - break; - } - } - } - mutex_unlock(&p->thread_lock); - - if (found) - thread_pool_exit_worker(w); -} - -/* - * Add new worker thread with given parameters. - * If initialization callback fails, return error. - */ -int thread_pool_add_worker(struct thread_pool *p, - char *name, - unsigned int id, - void *(*init)(void *private), - void (*cleanup)(void *private), - void *private) -{ - struct thread_pool_worker *w; - int err = -ENOMEM; - - w = kzalloc(sizeof(struct thread_pool_worker), GFP_KERNEL); - if (!w) - goto err_out_exit; - - w->pool = p; - init_waitqueue_head(&w->wait); - w->cleanup = cleanup; - w->id = id; - - w->thread = kthread_run(thread_pool_worker_func, w, "%s", name); - if (IS_ERR(w->thread)) { - err = PTR_ERR(w->thread); - goto err_out_free; - } - - w->private = init(private); - if (IS_ERR(w->private)) { - err = PTR_ERR(w->private); - goto err_out_stop_thread; - } - - mutex_lock(&p->thread_lock); - list_add_tail(&w->worker_entry, &p->ready_list); - p->thread_num++; - mutex_unlock(&p->thread_lock); - - return 0; - -err_out_stop_thread: - kthread_stop(w->thread); -err_out_free: - kfree(w); -err_out_exit: - return err; -} - -/* - * Destroy the whole pool. - */ -void thread_pool_destroy(struct thread_pool *p) -{ - while (p->thread_num) { - dprintk("%s: num: %d.\n", __func__, p->thread_num); - thread_pool_del_worker(p); - } - - kfree(p); -} - -/* - * Create a pool with given number of threads. - * They will have sequential IDs started from zero. - */ -struct thread_pool *thread_pool_create(int num, char *name, - void *(*init)(void *private), - void (*cleanup)(void *private), - void *private) -{ - struct thread_pool_worker *w, *tmp; - struct thread_pool *p; - int err = -ENOMEM; - int i; - - p = kzalloc(sizeof(struct thread_pool), GFP_KERNEL); - if (!p) - goto err_out_exit; - - init_waitqueue_head(&p->wait); - mutex_init(&p->thread_lock); - INIT_LIST_HEAD(&p->ready_list); - INIT_LIST_HEAD(&p->active_list); - p->thread_num = 0; - - for (i = 0; i < num; ++i) { - err = thread_pool_add_worker(p, name, i, init, - cleanup, private); - if (err) - goto err_out_free_all; - } - - return p; - -err_out_free_all: - list_for_each_entry_safe(w, tmp, &p->ready_list, worker_entry) { - list_del(&w->worker_entry); - thread_pool_exit_worker(w); - } - kfree(p); -err_out_exit: - return ERR_PTR(err); -} - -/* - * Schedule execution of the action on a given thread, - * provided ID pointer has to match previously stored - * private data. - */ -int thread_pool_schedule_private(struct thread_pool *p, - int (*setup)(void *private, void *data), - int (*action)(void *private, void *data), - void *data, long timeout, void *id) -{ - struct thread_pool_worker *w, *tmp, *worker = NULL; - int err = 0; - - while (!worker && !err) { - timeout = wait_event_interruptible_timeout(p->wait, - !list_empty(&p->ready_list), - timeout); - - if (!timeout) { - err = -ETIMEDOUT; - break; - } - - worker = NULL; - mutex_lock(&p->thread_lock); - list_for_each_entry_safe(w, tmp, &p->ready_list, worker_entry) { - if (id && id != w->private) - continue; - - worker = w; - - list_move_tail(&w->worker_entry, &p->active_list); - - err = setup(w->private, data); - if (!err) { - w->schedule_data = data; - w->action = action; - w->has_data = 1; - wake_up(&w->wait); - } else { - list_move_tail(&w->worker_entry, - &p->ready_list); - } - - break; - } - mutex_unlock(&p->thread_lock); - } - - return err; -} - -/* - * Schedule execution on arbitrary thread from the pool. - */ -int thread_pool_schedule(struct thread_pool *p, - int (*setup)(void *private, void *data), - int (*action)(void *private, void *data), - void *data, long timeout) -{ - return thread_pool_schedule_private(p, setup, - action, data, timeout, NULL); -} diff --git a/drivers/staging/dst/trans.c b/drivers/staging/dst/trans.c deleted file mode 100644 index 1c36a6bc31d5..000000000000 --- a/drivers/staging/dst/trans.c +++ /dev/null @@ -1,337 +0,0 @@ -/* - * 2007+ Copyright (c) Evgeniy Polyakov <zbr@ioremap.net> - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/bio.h> -#include <linux/dst.h> -#include <linux/slab.h> -#include <linux/mempool.h> - -/* - * Transaction memory pool size. - */ -static int dst_mempool_num = 32; -module_param(dst_mempool_num, int, 0644); - -/* - * Transaction tree management. - */ -static inline int dst_trans_cmp(dst_gen_t gen, dst_gen_t new) -{ - if (gen < new) - return 1; - if (gen > new) - return -1; - return 0; -} - -struct dst_trans *dst_trans_search(struct dst_node *node, dst_gen_t gen) -{ - struct rb_root *root = &node->trans_root; - struct rb_node *n = root->rb_node; - struct dst_trans *t, *ret = NULL; - int cmp; - - while (n) { - t = rb_entry(n, struct dst_trans, trans_entry); - - cmp = dst_trans_cmp(t->gen, gen); - if (cmp < 0) - n = n->rb_left; - else if (cmp > 0) - n = n->rb_right; - else { - ret = t; - break; - } - } - - dprintk("%s: %s transaction: id: %llu.\n", __func__, - (ret) ? "found" : "not found", gen); - - return ret; -} - -static int dst_trans_insert(struct dst_trans *new) -{ - struct rb_root *root = &new->n->trans_root; - struct rb_node **n = &root->rb_node, *parent = NULL; - struct dst_trans *ret = NULL, *t; - int cmp; - - while (*n) { - parent = *n; - - t = rb_entry(parent, struct dst_trans, trans_entry); - - cmp = dst_trans_cmp(t->gen, new->gen); - if (cmp < 0) - n = &parent->rb_left; - else if (cmp > 0) - n = &parent->rb_right; - else { - ret = t; - break; - } - } - - new->send_time = jiffies; - if (ret) { - printk(KERN_DEBUG "%s: exist: old: gen: %llu, bio: %llu/%u, " - "send_time: %lu, new: gen: %llu, bio: %llu/%u, " - "send_time: %lu.\n", __func__, - ret->gen, (u64)ret->bio->bi_sector, - ret->bio->bi_size, ret->send_time, - new->gen, (u64)new->bio->bi_sector, - new->bio->bi_size, new->send_time); - return -EEXIST; - } - - rb_link_node(&new->trans_entry, parent, n); - rb_insert_color(&new->trans_entry, root); - - dprintk("%s: inserted: gen: %llu, bio: %llu/%u, send_time: %lu.\n", - __func__, new->gen, (u64)new->bio->bi_sector, - new->bio->bi_size, new->send_time); - - return 0; -} - -int dst_trans_remove_nolock(struct dst_trans *t) -{ - struct dst_node *n = t->n; - - if (t->trans_entry.rb_parent_color) { - rb_erase(&t->trans_entry, &n->trans_root); - t->trans_entry.rb_parent_color = 0; - } - return 0; -} - -int dst_trans_remove(struct dst_trans *t) -{ - int ret; - struct dst_node *n = t->n; - - mutex_lock(&n->trans_lock); - ret = dst_trans_remove_nolock(t); - mutex_unlock(&n->trans_lock); - - return ret; -} - -/* - * When transaction is completed and there are no more users, - * we complete appriate block IO request with given error status. - */ -void dst_trans_put(struct dst_trans *t) -{ - if (atomic_dec_and_test(&t->refcnt)) { - struct bio *bio = t->bio; - - dprintk("%s: completed t: %p, gen: %llu, bio: %p.\n", - __func__, t, t->gen, bio); - - bio_endio(bio, t->error); - bio_put(bio); - - dst_node_put(t->n); - mempool_free(t, t->n->trans_pool); - } -} - -/* - * Process given block IO request: allocate transaction, insert it into the tree - * and send/schedule crypto processing. - */ -int dst_process_bio(struct dst_node *n, struct bio *bio) -{ - struct dst_trans *t; - int err = -ENOMEM; - - t = mempool_alloc(n->trans_pool, GFP_NOFS); - if (!t) - goto err_out_exit; - - t->n = dst_node_get(n); - t->bio = bio; - t->error = 0; - t->retries = 0; - atomic_set(&t->refcnt, 1); - t->gen = atomic_long_inc_return(&n->gen); - - t->enc = bio_data_dir(bio); - dst_bio_to_cmd(bio, &t->cmd, DST_IO, t->gen); - - mutex_lock(&n->trans_lock); - err = dst_trans_insert(t); - mutex_unlock(&n->trans_lock); - if (err) - goto err_out_free; - - dprintk("%s: gen: %llu, bio: %llu/%u, dir/enc: %d, need_crypto: %d.\n", - __func__, t->gen, (u64)bio->bi_sector, - bio->bi_size, t->enc, dst_need_crypto(n)); - - if (dst_need_crypto(n) && t->enc) - dst_trans_crypto(t); - else - dst_trans_send(t); - - return 0; - -err_out_free: - dst_node_put(n); - mempool_free(t, n->trans_pool); -err_out_exit: - bio_endio(bio, err); - bio_put(bio); - return err; -} - -/* - * Scan for timeout/stale transactions. - * Each transaction is being resent multiple times before error completion. - */ -static void dst_trans_scan(struct work_struct *work) -{ - struct dst_node *n = container_of(work, struct dst_node, - trans_work.work); - struct rb_node *rb_node; - struct dst_trans *t; - unsigned long timeout = n->trans_scan_timeout; - int num = 10 * n->trans_max_retries; - - mutex_lock(&n->trans_lock); - - for (rb_node = rb_first(&n->trans_root); rb_node; ) { - t = rb_entry(rb_node, struct dst_trans, trans_entry); - - if (timeout && time_after(t->send_time + timeout, jiffies) - && t->retries == 0) - break; -#if 0 - dprintk("%s: t: %p, gen: %llu, n: %s, retries: %u, max: %u.\n", - __func__, t, t->gen, n->name, - t->retries, n->trans_max_retries); -#endif - if (--num == 0) - break; - - dst_trans_get(t); - - rb_node = rb_next(rb_node); - - if (timeout && (++t->retries < n->trans_max_retries)) { - dst_trans_send(t); - } else { - t->error = -ETIMEDOUT; - dst_trans_remove_nolock(t); - dst_trans_put(t); - } - - dst_trans_put(t); - } - - mutex_unlock(&n->trans_lock); - - /* - * If no timeout specified then system is in the middle of exiting - * process, so no need to reschedule scanning process again. - */ - if (timeout) { - if (!num) - timeout = HZ; - schedule_delayed_work(&n->trans_work, timeout); - } -} - -/* - * Flush all transactions and mark them as timed out. - * Destroy transaction pools. - */ -void dst_node_trans_exit(struct dst_node *n) -{ - struct dst_trans *t; - struct rb_node *rb_node; - - if (!n->trans_cache) - return; - - dprintk("%s: n: %p, cancelling the work.\n", __func__, n); - cancel_delayed_work_sync(&n->trans_work); - flush_scheduled_work(); - dprintk("%s: n: %p, work has been cancelled.\n", __func__, n); - - for (rb_node = rb_first(&n->trans_root); rb_node; ) { - t = rb_entry(rb_node, struct dst_trans, trans_entry); - - dprintk("%s: t: %p, gen: %llu, n: %s.\n", - __func__, t, t->gen, n->name); - - rb_node = rb_next(rb_node); - - t->error = -ETIMEDOUT; - dst_trans_remove_nolock(t); - dst_trans_put(t); - } - - mempool_destroy(n->trans_pool); - kmem_cache_destroy(n->trans_cache); -} - -/* - * Initialize transaction storage for given node. - * Transaction stores not only control information, - * but also network command and crypto data (if needed) - * to reduce number of allocations. Thus transaction size - * differs from node to node. - */ -int dst_node_trans_init(struct dst_node *n, unsigned int size) -{ - /* - * We need this, since node with given name can be dropped from the - * hash table, but be still alive, so subsequent creation of the node - * with the same name may collide with existing cache name. - */ - - snprintf(n->cache_name, sizeof(n->cache_name), "%s-%p", n->name, n); - - n->trans_cache = kmem_cache_create(n->cache_name, - size + n->crypto.crypto_attached_size, - 0, 0, NULL); - if (!n->trans_cache) - goto err_out_exit; - - n->trans_pool = mempool_create_slab_pool(dst_mempool_num, - n->trans_cache); - if (!n->trans_pool) - goto err_out_cache_destroy; - - mutex_init(&n->trans_lock); - n->trans_root = RB_ROOT; - - INIT_DELAYED_WORK(&n->trans_work, dst_trans_scan); - schedule_delayed_work(&n->trans_work, n->trans_scan_timeout); - - dprintk("%s: n: %p, size: %u, crypto: %u.\n", - __func__, n, size, n->crypto.crypto_attached_size); - - return 0; - -err_out_cache_destroy: - kmem_cache_destroy(n->trans_cache); -err_out_exit: - return -ENOMEM; -} diff --git a/drivers/staging/iio/ring_sw.h b/drivers/staging/iio/ring_sw.h index f0b86f02cd80..fd677f008365 100644 --- a/drivers/staging/iio/ring_sw.h +++ b/drivers/staging/iio/ring_sw.h @@ -29,7 +29,6 @@ * driver requests - some may support multiple options */ -#include <linux/autoconf.h> #include "iio.h" #include "ring_generic.h" diff --git a/drivers/staging/octeon/Kconfig b/drivers/staging/octeon/Kconfig index 536e2382de54..638ad6b35891 100644 --- a/drivers/staging/octeon/Kconfig +++ b/drivers/staging/octeon/Kconfig @@ -1,7 +1,8 @@ config OCTEON_ETHERNET tristate "Cavium Networks Octeon Ethernet support" depends on CPU_CAVIUM_OCTEON - select MII + select PHYLIB + select MDIO_OCTEON help This driver supports the builtin ethernet ports on Cavium Networks' products in the Octeon family. This driver supports the diff --git a/drivers/staging/octeon/ethernet-mdio.c b/drivers/staging/octeon/ethernet-mdio.c index 31a58e508924..05a5cc0f43ed 100644 --- a/drivers/staging/octeon/ethernet-mdio.c +++ b/drivers/staging/octeon/ethernet-mdio.c @@ -26,7 +26,8 @@ **********************************************************************/ #include <linux/kernel.h> #include <linux/ethtool.h> -#include <linux/mii.h> +#include <linux/phy.h> + #include <net/dst.h> #include <asm/octeon/octeon.h> @@ -34,86 +35,12 @@ #include "ethernet-defines.h" #include "octeon-ethernet.h" #include "ethernet-mdio.h" +#include "ethernet-util.h" #include "cvmx-helper-board.h" #include "cvmx-smix-defs.h" -DECLARE_MUTEX(mdio_sem); - -/** - * Perform an MII read. Called by the generic MII routines - * - * @dev: Device to perform read for - * @phy_id: The MII phy id - * @location: Register location to read - * Returns Result from the read or zero on failure - */ -static int cvm_oct_mdio_read(struct net_device *dev, int phy_id, int location) -{ - union cvmx_smix_cmd smi_cmd; - union cvmx_smix_rd_dat smi_rd; - - smi_cmd.u64 = 0; - smi_cmd.s.phy_op = 1; - smi_cmd.s.phy_adr = phy_id; - smi_cmd.s.reg_adr = location; - cvmx_write_csr(CVMX_SMIX_CMD(0), smi_cmd.u64); - - do { - if (!in_interrupt()) - yield(); - smi_rd.u64 = cvmx_read_csr(CVMX_SMIX_RD_DAT(0)); - } while (smi_rd.s.pending); - - if (smi_rd.s.val) - return smi_rd.s.dat; - else - return 0; -} - -static int cvm_oct_mdio_dummy_read(struct net_device *dev, int phy_id, - int location) -{ - return 0xffff; -} - -/** - * Perform an MII write. Called by the generic MII routines - * - * @dev: Device to perform write for - * @phy_id: The MII phy id - * @location: Register location to write - * @val: Value to write - */ -static void cvm_oct_mdio_write(struct net_device *dev, int phy_id, int location, - int val) -{ - union cvmx_smix_cmd smi_cmd; - union cvmx_smix_wr_dat smi_wr; - - smi_wr.u64 = 0; - smi_wr.s.dat = val; - cvmx_write_csr(CVMX_SMIX_WR_DAT(0), smi_wr.u64); - - smi_cmd.u64 = 0; - smi_cmd.s.phy_op = 0; - smi_cmd.s.phy_adr = phy_id; - smi_cmd.s.reg_adr = location; - cvmx_write_csr(CVMX_SMIX_CMD(0), smi_cmd.u64); - - do { - if (!in_interrupt()) - yield(); - smi_wr.u64 = cvmx_read_csr(CVMX_SMIX_WR_DAT(0)); - } while (smi_wr.s.pending); -} - -static void cvm_oct_mdio_dummy_write(struct net_device *dev, int phy_id, - int location, int val) -{ -} - static void cvm_oct_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) { @@ -125,49 +52,37 @@ static void cvm_oct_get_drvinfo(struct net_device *dev, static int cvm_oct_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) { struct octeon_ethernet *priv = netdev_priv(dev); - int ret; - down(&mdio_sem); - ret = mii_ethtool_gset(&priv->mii_info, cmd); - up(&mdio_sem); + if (priv->phydev) + return phy_ethtool_gset(priv->phydev, cmd); - return ret; + return -EINVAL; } static int cvm_oct_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) { struct octeon_ethernet *priv = netdev_priv(dev); - int ret; - down(&mdio_sem); - ret = mii_ethtool_sset(&priv->mii_info, cmd); - up(&mdio_sem); + if (!capable(CAP_NET_ADMIN)) + return -EPERM; + + if (priv->phydev) + return phy_ethtool_sset(priv->phydev, cmd); - return ret; + return -EINVAL; } static int cvm_oct_nway_reset(struct net_device *dev) { struct octeon_ethernet *priv = netdev_priv(dev); - int ret; - down(&mdio_sem); - ret = mii_nway_restart(&priv->mii_info); - up(&mdio_sem); + if (!capable(CAP_NET_ADMIN)) + return -EPERM; - return ret; -} + if (priv->phydev) + return phy_start_aneg(priv->phydev); -static u32 cvm_oct_get_link(struct net_device *dev) -{ - struct octeon_ethernet *priv = netdev_priv(dev); - u32 ret; - - down(&mdio_sem); - ret = mii_link_ok(&priv->mii_info); - up(&mdio_sem); - - return ret; + return -EINVAL; } const struct ethtool_ops cvm_oct_ethtool_ops = { @@ -175,7 +90,7 @@ const struct ethtool_ops cvm_oct_ethtool_ops = { .get_settings = cvm_oct_get_settings, .set_settings = cvm_oct_set_settings, .nway_reset = cvm_oct_nway_reset, - .get_link = cvm_oct_get_link, + .get_link = ethtool_op_get_link, .get_sg = ethtool_op_get_sg, .get_tx_csum = ethtool_op_get_tx_csum, }; @@ -191,41 +106,78 @@ const struct ethtool_ops cvm_oct_ethtool_ops = { int cvm_oct_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) { struct octeon_ethernet *priv = netdev_priv(dev); - struct mii_ioctl_data *data = if_mii(rq); - unsigned int duplex_chg; - int ret; - down(&mdio_sem); - ret = generic_mii_ioctl(&priv->mii_info, data, cmd, &duplex_chg); - up(&mdio_sem); + if (!netif_running(dev)) + return -EINVAL; + + if (!priv->phydev) + return -EINVAL; + + return phy_mii_ioctl(priv->phydev, if_mii(rq), cmd); +} - return ret; +static void cvm_oct_adjust_link(struct net_device *dev) +{ + struct octeon_ethernet *priv = netdev_priv(dev); + cvmx_helper_link_info_t link_info; + + if (priv->last_link != priv->phydev->link) { + priv->last_link = priv->phydev->link; + link_info.u64 = 0; + link_info.s.link_up = priv->last_link ? 1 : 0; + link_info.s.full_duplex = priv->phydev->duplex ? 1 : 0; + link_info.s.speed = priv->phydev->speed; + cvmx_helper_link_set( priv->port, link_info); + if (priv->last_link) { + netif_carrier_on(dev); + if (priv->queue != -1) + DEBUGPRINT("%s: %u Mbps %s duplex, " + "port %2d, queue %2d\n", + dev->name, priv->phydev->speed, + priv->phydev->duplex ? + "Full" : "Half", + priv->port, priv->queue); + else + DEBUGPRINT("%s: %u Mbps %s duplex, " + "port %2d, POW\n", + dev->name, priv->phydev->speed, + priv->phydev->duplex ? + "Full" : "Half", + priv->port); + } else { + netif_carrier_off(dev); + DEBUGPRINT("%s: Link down\n", dev->name); + } + } } + /** - * Setup the MDIO device structures + * Setup the PHY * * @dev: Device to setup * * Returns Zero on success, negative on failure */ -int cvm_oct_mdio_setup_device(struct net_device *dev) +int cvm_oct_phy_setup_device(struct net_device *dev) { struct octeon_ethernet *priv = netdev_priv(dev); - int phy_id = cvmx_helper_board_get_mii_address(priv->port); - if (phy_id != -1) { - priv->mii_info.dev = dev; - priv->mii_info.phy_id = phy_id; - priv->mii_info.phy_id_mask = 0xff; - priv->mii_info.supports_gmii = 1; - priv->mii_info.reg_num_mask = 0x1f; - priv->mii_info.mdio_read = cvm_oct_mdio_read; - priv->mii_info.mdio_write = cvm_oct_mdio_write; - } else { - /* Supply dummy MDIO routines so the kernel won't crash - if the user tries to read them */ - priv->mii_info.mdio_read = cvm_oct_mdio_dummy_read; - priv->mii_info.mdio_write = cvm_oct_mdio_dummy_write; + + int phy_addr = cvmx_helper_board_get_mii_address(priv->port); + if (phy_addr != -1) { + char phy_id[20]; + + snprintf(phy_id, sizeof(phy_id), PHY_ID_FMT, "0", phy_addr); + + priv->phydev = phy_connect(dev, phy_id, cvm_oct_adjust_link, 0, + PHY_INTERFACE_MODE_GMII); + + if (IS_ERR(priv->phydev)) { + priv->phydev = NULL; + return -1; + } + priv->last_link = 0; + phy_start_aneg(priv->phydev); } return 0; } diff --git a/drivers/staging/octeon/ethernet-mdio.h b/drivers/staging/octeon/ethernet-mdio.h index b3328aeec2df..55d0614a7cd9 100644 --- a/drivers/staging/octeon/ethernet-mdio.h +++ b/drivers/staging/octeon/ethernet-mdio.h @@ -43,4 +43,4 @@ extern const struct ethtool_ops cvm_oct_ethtool_ops; int cvm_oct_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); -int cvm_oct_mdio_setup_device(struct net_device *dev); +int cvm_oct_phy_setup_device(struct net_device *dev); diff --git a/drivers/staging/octeon/ethernet-proc.c b/drivers/staging/octeon/ethernet-proc.c index 8fa88fc419b7..16308d484d3b 100644 --- a/drivers/staging/octeon/ethernet-proc.c +++ b/drivers/staging/octeon/ethernet-proc.c @@ -25,7 +25,6 @@ * Contact Cavium Networks for more information **********************************************************************/ #include <linux/kernel.h> -#include <linux/mii.h> #include <linux/seq_file.h> #include <linux/proc_fs.h> #include <net/dst.h> @@ -38,112 +37,6 @@ #include "cvmx-helper.h" #include "cvmx-pip.h" -static unsigned long long cvm_oct_stats_read_switch(struct net_device *dev, - int phy_id, int offset) -{ - struct octeon_ethernet *priv = netdev_priv(dev); - - priv->mii_info.mdio_write(dev, phy_id, 0x1d, 0xcc00 | offset); - return ((uint64_t) priv->mii_info. - mdio_read(dev, phy_id, - 0x1e) << 16) | (uint64_t) priv->mii_info. - mdio_read(dev, phy_id, 0x1f); -} - -static int cvm_oct_stats_switch_show(struct seq_file *m, void *v) -{ - static const int ports[] = { 0, 1, 2, 3, 9, -1 }; - struct net_device *dev = cvm_oct_device[0]; - int index = 0; - - while (ports[index] != -1) { - - /* Latch port */ - struct octeon_ethernet *priv = netdev_priv(dev); - - priv->mii_info.mdio_write(dev, 0x1b, 0x1d, - 0xdc00 | ports[index]); - seq_printf(m, "\nSwitch Port %d\n", ports[index]); - seq_printf(m, "InGoodOctets: %12llu\t" - "OutOctets: %12llu\t" - "64 Octets: %12llu\n", - cvm_oct_stats_read_switch(dev, 0x1b, - 0x00) | - (cvm_oct_stats_read_switch(dev, 0x1b, 0x01) << 32), - cvm_oct_stats_read_switch(dev, 0x1b, - 0x0E) | - (cvm_oct_stats_read_switch(dev, 0x1b, 0x0F) << 32), - cvm_oct_stats_read_switch(dev, 0x1b, 0x08)); - - seq_printf(m, "InBadOctets: %12llu\t" - "OutUnicast: %12llu\t" - "65-127 Octets: %12llu\n", - cvm_oct_stats_read_switch(dev, 0x1b, 0x02), - cvm_oct_stats_read_switch(dev, 0x1b, 0x10), - cvm_oct_stats_read_switch(dev, 0x1b, 0x09)); - - seq_printf(m, "InUnicast: %12llu\t" - "OutBroadcasts: %12llu\t" - "128-255 Octets: %12llu\n", - cvm_oct_stats_read_switch(dev, 0x1b, 0x04), - cvm_oct_stats_read_switch(dev, 0x1b, 0x13), - cvm_oct_stats_read_switch(dev, 0x1b, 0x0A)); - - seq_printf(m, "InBroadcasts: %12llu\t" - "OutMulticasts: %12llu\t" - "256-511 Octets: %12llu\n", - cvm_oct_stats_read_switch(dev, 0x1b, 0x06), - cvm_oct_stats_read_switch(dev, 0x1b, 0x12), - cvm_oct_stats_read_switch(dev, 0x1b, 0x0B)); - - seq_printf(m, "InMulticasts: %12llu\t" - "OutPause: %12llu\t" - "512-1023 Octets:%12llu\n", - cvm_oct_stats_read_switch(dev, 0x1b, 0x07), - cvm_oct_stats_read_switch(dev, 0x1b, 0x15), - cvm_oct_stats_read_switch(dev, 0x1b, 0x0C)); - - seq_printf(m, "InPause: %12llu\t" - "Excessive: %12llu\t" - "1024-Max Octets:%12llu\n", - cvm_oct_stats_read_switch(dev, 0x1b, 0x16), - cvm_oct_stats_read_switch(dev, 0x1b, 0x11), - cvm_oct_stats_read_switch(dev, 0x1b, 0x0D)); - - seq_printf(m, "InUndersize: %12llu\t" - "Collisions: %12llu\n", - cvm_oct_stats_read_switch(dev, 0x1b, 0x18), - cvm_oct_stats_read_switch(dev, 0x1b, 0x1E)); - - seq_printf(m, "InFragments: %12llu\t" - "Deferred: %12llu\n", - cvm_oct_stats_read_switch(dev, 0x1b, 0x19), - cvm_oct_stats_read_switch(dev, 0x1b, 0x05)); - - seq_printf(m, "InOversize: %12llu\t" - "Single: %12llu\n", - cvm_oct_stats_read_switch(dev, 0x1b, 0x1A), - cvm_oct_stats_read_switch(dev, 0x1b, 0x14)); - - seq_printf(m, "InJabber: %12llu\t" - "Multiple: %12llu\n", - cvm_oct_stats_read_switch(dev, 0x1b, 0x1B), - cvm_oct_stats_read_switch(dev, 0x1b, 0x17)); - - seq_printf(m, "In RxErr: %12llu\t" - "OutFCSErr: %12llu\n", - cvm_oct_stats_read_switch(dev, 0x1b, 0x1C), - cvm_oct_stats_read_switch(dev, 0x1b, 0x03)); - - seq_printf(m, "InFCSErr: %12llu\t" - "Late: %12llu\n", - cvm_oct_stats_read_switch(dev, 0x1b, 0x1D), - cvm_oct_stats_read_switch(dev, 0x1b, 0x1F)); - index++; - } - return 0; -} - /** * User is reading /proc/octeon_ethernet_stats * @@ -215,11 +108,6 @@ static int cvm_oct_stats_show(struct seq_file *m, void *v) } } - if (cvm_oct_device[0]) { - priv = netdev_priv(cvm_oct_device[0]); - if (priv->imode == CVMX_HELPER_INTERFACE_MODE_GMII) - cvm_oct_stats_switch_show(m, v); - } return 0; } diff --git a/drivers/staging/octeon/ethernet-rgmii.c b/drivers/staging/octeon/ethernet-rgmii.c index fbaa465d2fac..3820f1ec11d1 100644 --- a/drivers/staging/octeon/ethernet-rgmii.c +++ b/drivers/staging/octeon/ethernet-rgmii.c @@ -147,32 +147,36 @@ static void cvm_oct_rgmii_poll(struct net_device *dev) cvmx_write_csr(CVMX_GMXX_RXX_INT_REG(index, interface), gmxx_rxx_int_reg.u64); } - - link_info = cvmx_helper_link_autoconf(priv->port); - priv->link_info = link_info.u64; + if (priv->phydev == NULL) { + link_info = cvmx_helper_link_autoconf(priv->port); + priv->link_info = link_info.u64; + } spin_unlock_irqrestore(&global_register_lock, flags); - /* Tell Linux */ - if (link_info.s.link_up) { - - if (!netif_carrier_ok(dev)) - netif_carrier_on(dev); - if (priv->queue != -1) - DEBUGPRINT - ("%s: %u Mbps %s duplex, port %2d, queue %2d\n", - dev->name, link_info.s.speed, - (link_info.s.full_duplex) ? "Full" : "Half", - priv->port, priv->queue); - else - DEBUGPRINT("%s: %u Mbps %s duplex, port %2d, POW\n", - dev->name, link_info.s.speed, - (link_info.s.full_duplex) ? "Full" : "Half", - priv->port); - } else { - - if (netif_carrier_ok(dev)) - netif_carrier_off(dev); - DEBUGPRINT("%s: Link down\n", dev->name); + if (priv->phydev == NULL) { + /* Tell core. */ + if (link_info.s.link_up) { + if (!netif_carrier_ok(dev)) + netif_carrier_on(dev); + if (priv->queue != -1) + DEBUGPRINT("%s: %u Mbps %s duplex, " + "port %2d, queue %2d\n", + dev->name, link_info.s.speed, + (link_info.s.full_duplex) ? + "Full" : "Half", + priv->port, priv->queue); + else + DEBUGPRINT("%s: %u Mbps %s duplex, " + "port %2d, POW\n", + dev->name, link_info.s.speed, + (link_info.s.full_duplex) ? + "Full" : "Half", + priv->port); + } else { + if (netif_carrier_ok(dev)) + netif_carrier_off(dev); + DEBUGPRINT("%s: Link down\n", dev->name); + } } } diff --git a/drivers/staging/octeon/ethernet-sgmii.c b/drivers/staging/octeon/ethernet-sgmii.c index 2b54996bd85d..6061d01eca2d 100644 --- a/drivers/staging/octeon/ethernet-sgmii.c +++ b/drivers/staging/octeon/ethernet-sgmii.c @@ -113,7 +113,7 @@ int cvm_oct_sgmii_init(struct net_device *dev) struct octeon_ethernet *priv = netdev_priv(dev); cvm_oct_common_init(dev); dev->netdev_ops->ndo_stop(dev); - if (!octeon_is_simulation()) + if (!octeon_is_simulation() && priv->phydev == NULL) priv->poll = cvm_oct_sgmii_poll; /* FIXME: Need autoneg logic */ diff --git a/drivers/staging/octeon/ethernet-xaui.c b/drivers/staging/octeon/ethernet-xaui.c index 0c2e7cc40f35..ee3dc41b2c53 100644 --- a/drivers/staging/octeon/ethernet-xaui.c +++ b/drivers/staging/octeon/ethernet-xaui.c @@ -112,7 +112,7 @@ int cvm_oct_xaui_init(struct net_device *dev) struct octeon_ethernet *priv = netdev_priv(dev); cvm_oct_common_init(dev); dev->netdev_ops->ndo_stop(dev); - if (!octeon_is_simulation()) + if (!octeon_is_simulation() && priv->phydev == NULL) priv->poll = cvm_oct_xaui_poll; return 0; diff --git a/drivers/staging/octeon/ethernet.c b/drivers/staging/octeon/ethernet.c index 492c5029992d..4cfd4b136b32 100644 --- a/drivers/staging/octeon/ethernet.c +++ b/drivers/staging/octeon/ethernet.c @@ -30,7 +30,7 @@ #include <linux/netdevice.h> #include <linux/etherdevice.h> #include <linux/delay.h> -#include <linux/mii.h> +#include <linux/phy.h> #include <net/dst.h> @@ -132,8 +132,6 @@ static struct timer_list cvm_oct_poll_timer; */ struct net_device *cvm_oct_device[TOTAL_NUMBER_OF_PORTS]; -extern struct semaphore mdio_sem; - /** * Periodic timer tick for slow management operations * @@ -160,13 +158,8 @@ static void cvm_do_timer(unsigned long arg) goto out; priv = netdev_priv(cvm_oct_device[port]); - if (priv->poll) { - /* skip polling if we don't get the lock */ - if (!down_trylock(&mdio_sem)) { - priv->poll(cvm_oct_device[port]); - up(&mdio_sem); - } - } + if (priv->poll) + priv->poll(cvm_oct_device[port]); queues_per_port = cvmx_pko_get_num_queues(port); /* Drain any pending packets in the free list */ @@ -524,7 +517,7 @@ int cvm_oct_common_init(struct net_device *dev) dev->features |= NETIF_F_LLTX; SET_ETHTOOL_OPS(dev, &cvm_oct_ethtool_ops); - cvm_oct_mdio_setup_device(dev); + cvm_oct_phy_setup_device(dev); dev->netdev_ops->ndo_set_mac_address(dev, &sa); dev->netdev_ops->ndo_change_mtu(dev, dev->mtu); @@ -540,7 +533,10 @@ int cvm_oct_common_init(struct net_device *dev) void cvm_oct_common_uninit(struct net_device *dev) { - /* Currently nothing to do */ + struct octeon_ethernet *priv = netdev_priv(dev); + + if (priv->phydev) + phy_disconnect(priv->phydev); } static const struct net_device_ops cvm_oct_npi_netdev_ops = { @@ -627,6 +623,8 @@ static const struct net_device_ops cvm_oct_pow_netdev_ops = { #endif }; +extern void octeon_mdiobus_force_mod_depencency(void); + /** * Module/ driver initialization. Creates the linux network * devices. @@ -640,6 +638,7 @@ static int __init cvm_oct_init_module(void) int fau = FAU_NUM_PACKET_BUFFERS_TO_FREE; int qos; + octeon_mdiobus_force_mod_depencency(); pr_notice("cavium-ethernet %s\n", OCTEON_ETHERNET_VERSION); if (OCTEON_IS_MODEL(OCTEON_CN52XX)) diff --git a/drivers/staging/octeon/octeon-ethernet.h b/drivers/staging/octeon/octeon-ethernet.h index 3aef9878fc0a..402a15b9bb0e 100644 --- a/drivers/staging/octeon/octeon-ethernet.h +++ b/drivers/staging/octeon/octeon-ethernet.h @@ -50,9 +50,9 @@ struct octeon_ethernet { /* List of outstanding tx buffers per queue */ struct sk_buff_head tx_free_list[16]; /* Device statistics */ - struct net_device_stats stats -; /* Generic MII info structure */ - struct mii_if_info mii_info; + struct net_device_stats stats; + struct phy_device *phydev; + unsigned int last_link; /* Last negotiated link state */ uint64_t link_info; /* Called periodically to check link status */ diff --git a/drivers/staging/panel/Kconfig b/drivers/staging/panel/Kconfig index 3abe7c9d558d..3defa0133f2e 100644 --- a/drivers/staging/panel/Kconfig +++ b/drivers/staging/panel/Kconfig @@ -47,7 +47,7 @@ config PANEL_PROFILE config PANEL_KEYPAD depends on PANEL && PANEL_PROFILE="0" int "Keypad type (0=none, 1=old 6 keys, 2=new 6 keys, 3=Nexcom 4 keys)" - range 0 4 + range 0 3 default 0 ---help--- This enables and configures a keypad connected to the parallel port. diff --git a/drivers/staging/panel/panel.c b/drivers/staging/panel/panel.c index 4ce399b6d237..95c93e82ccec 100644 --- a/drivers/staging/panel/panel.c +++ b/drivers/staging/panel/panel.c @@ -55,7 +55,7 @@ #include <linux/list.h> #include <linux/notifier.h> #include <linux/reboot.h> -#include <linux/utsrelease.h> +#include <generated/utsrelease.h> #include <linux/io.h> #include <asm/uaccess.h> @@ -378,7 +378,7 @@ static unsigned char lcd_bits[LCD_PORTS][LCD_BITS][BIT_STATES]; #ifdef CONFIG_PANEL_LCD_CHARSET #undef DEFAULT_LCD_CHARSET -#define DEFAULT_LCD_CHARSET +#define DEFAULT_LCD_CHARSET CONFIG_PANEL_LCD_CHARSET #endif #endif /* DEFAULT_PROFILE == 0 */ diff --git a/drivers/staging/pohmelfs/dir.c b/drivers/staging/pohmelfs/dir.c index 6c5b261e9f06..aacd25bfb0cb 100644 --- a/drivers/staging/pohmelfs/dir.c +++ b/drivers/staging/pohmelfs/dir.c @@ -722,8 +722,6 @@ static int pohmelfs_remove_entry(struct inode *dir, struct dentry *dentry) if (inode->i_nlink) inode_dec_link_count(inode); } - dprintk("%s: inode: %p, lock: %ld, unhashed: %d.\n", - __func__, pi, inode->i_state & I_LOCK, hlist_unhashed(&inode->i_hash)); return err; } diff --git a/drivers/staging/ramzswap/TODO b/drivers/staging/ramzswap/TODO index bac40d6cb9f1..8d64e28fac0e 100644 --- a/drivers/staging/ramzswap/TODO +++ b/drivers/staging/ramzswap/TODO @@ -1,6 +1,5 @@ TODO: - Add support for swap notifiers - - Remove CONFIG_ARM hack Please send patches to Greg Kroah-Hartman <greg@kroah.com> and Nitin Gupta <ngupta@vflare.org> diff --git a/drivers/staging/ramzswap/ramzswap_drv.c b/drivers/staging/ramzswap/ramzswap_drv.c index b839f05efbce..989fac5b01b3 100644 --- a/drivers/staging/ramzswap/ramzswap_drv.c +++ b/drivers/staging/ramzswap/ramzswap_drv.c @@ -222,28 +222,6 @@ out: return ret; } -static void ramzswap_flush_dcache_page(struct page *page) -{ -#ifdef CONFIG_ARM - int flag = 0; - /* - * Ugly hack to get flush_dcache_page() work on ARM. - * page_mapping(page) == NULL after clearing this swap cache flag. - * Without clearing this flag, flush_dcache_page() will simply set - * "PG_dcache_dirty" bit and return. - */ - if (PageSwapCache(page)) { - flag = 1; - ClearPageSwapCache(page); - } -#endif - flush_dcache_page(page); -#ifdef CONFIG_ARM - if (flag) - SetPageSwapCache(page); -#endif -} - void ramzswap_ioctl_get_stats(struct ramzswap *rzs, struct ramzswap_ioctl_stats *s) { @@ -655,7 +633,7 @@ static int handle_zero_page(struct bio *bio) memset(user_mem, 0, PAGE_SIZE); kunmap_atomic(user_mem, KM_USER0); - ramzswap_flush_dcache_page(page); + flush_dcache_page(page); set_bit(BIO_UPTODATE, &bio->bi_flags); bio_endio(bio, 0); @@ -679,7 +657,7 @@ static int handle_uncompressed_page(struct ramzswap *rzs, struct bio *bio) kunmap_atomic(user_mem, KM_USER0); kunmap_atomic(cmem, KM_USER1); - ramzswap_flush_dcache_page(page); + flush_dcache_page(page); set_bit(BIO_UPTODATE, &bio->bi_flags); bio_endio(bio, 0); @@ -779,7 +757,7 @@ static int ramzswap_read(struct ramzswap *rzs, struct bio *bio) goto out; } - ramzswap_flush_dcache_page(page); + flush_dcache_page(page); set_bit(BIO_UPTODATE, &bio->bi_flags); bio_endio(bio, 0); diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211.h b/drivers/staging/rtl8187se/ieee80211/ieee80211.h index 3222c22152fb..0d490c164db6 100644 --- a/drivers/staging/rtl8187se/ieee80211/ieee80211.h +++ b/drivers/staging/rtl8187se/ieee80211/ieee80211.h @@ -1318,13 +1318,13 @@ extern int ieee80211_encrypt_fragment( struct sk_buff *frag, int hdr_len); -extern int ieee80211_xmit(struct sk_buff *skb, +extern int ieee80211_rtl_xmit(struct sk_buff *skb, struct net_device *dev); extern void ieee80211_txb_free(struct ieee80211_txb *); /* ieee80211_rx.c */ -extern int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb, +extern int ieee80211_rtl_rx(struct ieee80211_device *ieee, struct sk_buff *skb, struct ieee80211_rx_stats *rx_stats); extern void ieee80211_rx_mgt(struct ieee80211_device *ieee, struct ieee80211_hdr_4addr *header, @@ -1376,8 +1376,8 @@ extern void ieee80211_stop_protocol(struct ieee80211_device *ieee); extern void ieee80211_softmac_start_protocol(struct ieee80211_device *ieee); extern void ieee80211_softmac_stop_protocol(struct ieee80211_device *ieee); extern void ieee80211_reset_queue(struct ieee80211_device *ieee); -extern void ieee80211_wake_queue(struct ieee80211_device *ieee); -extern void ieee80211_stop_queue(struct ieee80211_device *ieee); +extern void ieee80211_rtl_wake_queue(struct ieee80211_device *ieee); +extern void ieee80211_rtl_stop_queue(struct ieee80211_device *ieee); extern struct sk_buff *ieee80211_get_beacon(struct ieee80211_device *ieee); extern void ieee80211_start_send_beacons(struct ieee80211_device *ieee); extern void ieee80211_stop_send_beacons(struct ieee80211_device *ieee); @@ -1385,7 +1385,7 @@ extern int ieee80211_wpa_supplicant_ioctl(struct ieee80211_device *ieee, struct extern void notify_wx_assoc_event(struct ieee80211_device *ieee); extern void ieee80211_ps_tx_ack(struct ieee80211_device *ieee, short success); extern void SendDisassociation(struct ieee80211_device *ieee,u8* asSta,u8 asRsn); -extern void ieee80211_start_scan(struct ieee80211_device *ieee); +extern void ieee80211_rtl_start_scan(struct ieee80211_device *ieee); //Add for RF power on power off by lizhaoming 080512 extern void SendDisassociation(struct ieee80211_device *ieee, diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_rx.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_rx.c index f882dd8cf9b5..9128c181bc7d 100644 --- a/drivers/staging/rtl8187se/ieee80211/ieee80211_rx.c +++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_rx.c @@ -469,7 +469,7 @@ drop: /* All received frames are sent to this function. @skb contains the frame in * IEEE 802.11 format, i.e., in the format it was sent over air. * This function is called only as a tasklet (software IRQ). */ -int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb, +int ieee80211_rtl_rx(struct ieee80211_device *ieee, struct sk_buff *skb, struct ieee80211_rx_stats *rx_stats) { struct net_device *dev = ieee->dev; diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c index 1fe19c39d702..c7c645af0ebb 100644 --- a/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c +++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c @@ -689,7 +689,7 @@ void ieee80211_stop_scan(struct ieee80211_device *ieee) } /* called with ieee->lock held */ -void ieee80211_start_scan(struct ieee80211_device *ieee) +void ieee80211_rtl_start_scan(struct ieee80211_device *ieee) { if(IS_DOT11D_ENABLE(ieee) ) { @@ -1196,7 +1196,7 @@ void ieee80211_associate_step1(struct ieee80211_device *ieee) } } -void ieee80211_auth_challenge(struct ieee80211_device *ieee, u8 *challenge, int chlen) +void ieee80211_rtl_auth_challenge(struct ieee80211_device *ieee, u8 *challenge, int chlen) { u8 *c; struct sk_buff *skb; @@ -1898,7 +1898,7 @@ associate_complete: ieee80211_associate_step2(ieee); }else{ - ieee80211_auth_challenge(ieee, challenge, chlen); + ieee80211_rtl_auth_challenge(ieee, challenge, chlen); } }else{ ieee->softmac_stats.rx_auth_rs_err++; @@ -2047,7 +2047,7 @@ void ieee80211_reset_queue(struct ieee80211_device *ieee) } -void ieee80211_wake_queue(struct ieee80211_device *ieee) +void ieee80211_rtl_wake_queue(struct ieee80211_device *ieee) { unsigned long flags; @@ -2089,7 +2089,7 @@ exit : } -void ieee80211_stop_queue(struct ieee80211_device *ieee) +void ieee80211_rtl_stop_queue(struct ieee80211_device *ieee) { //unsigned long flags; //spin_lock_irqsave(&ieee->lock,flags); @@ -2301,7 +2301,7 @@ void ieee80211_start_bss(struct ieee80211_device *ieee) //#else if (ieee->state == IEEE80211_NOLINK){ ieee->actscanning = true; - ieee80211_start_scan(ieee); + ieee80211_rtl_start_scan(ieee); } //#endif spin_unlock_irqrestore(&ieee->lock, flags); @@ -2357,7 +2357,7 @@ void ieee80211_associate_retry_wq(struct work_struct *work) if(ieee->state == IEEE80211_NOLINK){ ieee->beinretry = false; ieee->actscanning = true; - ieee80211_start_scan(ieee); + ieee80211_rtl_start_scan(ieee); } //YJ,add,080828, notify os here if(ieee->state == IEEE80211_NOLINK) diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_tx.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_tx.c index dde1f2e0cf32..69bd02164b0c 100644 --- a/drivers/staging/rtl8187se/ieee80211/ieee80211_tx.c +++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_tx.c @@ -304,7 +304,7 @@ ieee80211_classify(struct sk_buff *skb, struct ieee80211_network *network) } /* SKBs are added to the ieee->tx_queue. */ -int ieee80211_xmit(struct sk_buff *skb, +int ieee80211_rtl_xmit(struct sk_buff *skb, struct net_device *dev) { struct ieee80211_device *ieee = netdev_priv(dev); diff --git a/drivers/staging/rtl8187se/r8180_core.c b/drivers/staging/rtl8187se/r8180_core.c index 57c62b0a402f..e0f13efdb15a 100644 --- a/drivers/staging/rtl8187se/r8180_core.c +++ b/drivers/staging/rtl8187se/r8180_core.c @@ -1811,7 +1811,7 @@ void rtl8180_rx(struct net_device *dev) if(priv->rx_skb->len > 4) skb_trim(priv->rx_skb,priv->rx_skb->len-4); #ifndef RX_DONT_PASS_UL - if(!ieee80211_rx(priv->ieee80211, + if(!ieee80211_rtl_rx(priv->ieee80211, priv->rx_skb, &stats)){ #endif // RX_DONT_PASS_UL @@ -1917,11 +1917,11 @@ rate) if (!check_nic_enought_desc(dev, priority)){ DMESGW("Error: no descriptor left by previous TX (avail %d) ", get_curr_tx_free_desc(dev, priority)); - ieee80211_stop_queue(priv->ieee80211); + ieee80211_rtl_stop_queue(priv->ieee80211); } rtl8180_tx(dev, skb->data, skb->len, priority, morefrag,0,rate); if (!check_nic_enought_desc(dev, priority)) - ieee80211_stop_queue(priv->ieee80211); + ieee80211_rtl_stop_queue(priv->ieee80211); spin_unlock_irqrestore(&priv->tx_lock,flags); } @@ -3680,7 +3680,7 @@ static const struct net_device_ops rtl8180_netdev_ops = { .ndo_set_mac_address = r8180_set_mac_adr, .ndo_validate_addr = eth_validate_addr, .ndo_change_mtu = eth_change_mtu, - .ndo_start_xmit = ieee80211_xmit, + .ndo_start_xmit = ieee80211_rtl_xmit, }; static int __devinit rtl8180_pci_probe(struct pci_dev *pdev, @@ -3900,7 +3900,7 @@ void rtl8180_try_wake_queue(struct net_device *dev, int pri) spin_unlock_irqrestore(&priv->tx_lock,flags); if(enough_desc) - ieee80211_wake_queue(priv->ieee80211); + ieee80211_rtl_wake_queue(priv->ieee80211); } void rtl8180_tx_isr(struct net_device *dev, int pri,short error) diff --git a/drivers/staging/rtl8187se/r8180_wx.c b/drivers/staging/rtl8187se/r8180_wx.c index 536cb6e8e796..124cde356cbc 100644 --- a/drivers/staging/rtl8187se/r8180_wx.c +++ b/drivers/staging/rtl8187se/r8180_wx.c @@ -377,7 +377,7 @@ static int r8180_wx_set_scan(struct net_device *dev, struct iw_request_info *a, // queue_work(priv->ieee80211->wq, &priv->ieee80211->wx_sync_scan_wq); //printk("start scan============================>\n"); ieee80211_softmac_ips_scan_syncro(priv->ieee80211); -//ieee80211_start_scan(priv->ieee80211); +//ieee80211_rtl_start_scan(priv->ieee80211); /* intentionally forget to up sem */ // up(&priv->ieee80211->wx_sem); ret = 0; diff --git a/drivers/staging/rtl8192e/ieee80211.h b/drivers/staging/rtl8192e/ieee80211.h index 97137ddefff4..3ba9e9e90bda 100644 --- a/drivers/staging/rtl8192e/ieee80211.h +++ b/drivers/staging/rtl8192e/ieee80211.h @@ -303,8 +303,8 @@ enum _ReasonCode{ #define ieee80211_rx_mgt ieee80211_rx_mgt_rsl #define ieee80211_get_beacon ieee80211_get_beacon_rsl -#define ieee80211_wake_queue ieee80211_wake_queue_rsl -#define ieee80211_stop_queue ieee80211_stop_queue_rsl +#define ieee80211_rtl_wake_queue ieee80211_rtl_wake_queue_rsl +#define ieee80211_rtl_stop_queue ieee80211_rtl_stop_queue_rsl #define ieee80211_reset_queue ieee80211_reset_queue_rsl #define ieee80211_softmac_stop_protocol ieee80211_softmac_stop_protocol_rsl #define ieee80211_softmac_start_protocol ieee80211_softmac_start_protocol_rsl @@ -2435,13 +2435,13 @@ extern int ieee80211_encrypt_fragment( struct sk_buff *frag, int hdr_len); -extern int ieee80211_xmit(struct sk_buff *skb, +extern int ieee80211_rtl_xmit(struct sk_buff *skb, struct net_device *dev); extern void ieee80211_txb_free(struct ieee80211_txb *); /* ieee80211_rx.c */ -extern int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb, +extern int ieee80211_rtl_rx(struct ieee80211_device *ieee, struct sk_buff *skb, struct ieee80211_rx_stats *rx_stats); extern void ieee80211_rx_mgt(struct ieee80211_device *ieee, struct ieee80211_hdr_4addr *header, @@ -2502,8 +2502,8 @@ extern void ieee80211_stop_protocol(struct ieee80211_device *ieee); extern void ieee80211_softmac_start_protocol(struct ieee80211_device *ieee); extern void ieee80211_softmac_stop_protocol(struct ieee80211_device *ieee); extern void ieee80211_reset_queue(struct ieee80211_device *ieee); -extern void ieee80211_wake_queue(struct ieee80211_device *ieee); -extern void ieee80211_stop_queue(struct ieee80211_device *ieee); +extern void ieee80211_rtl_wake_queue(struct ieee80211_device *ieee); +extern void ieee80211_rtl_stop_queue(struct ieee80211_device *ieee); extern struct sk_buff *ieee80211_get_beacon(struct ieee80211_device *ieee); extern void ieee80211_start_send_beacons(struct ieee80211_device *ieee); extern void ieee80211_stop_send_beacons(struct ieee80211_device *ieee); diff --git a/drivers/staging/rtl8192e/ieee80211/ieee80211.h b/drivers/staging/rtl8192e/ieee80211/ieee80211.h index 83c8452de378..aa76390487bb 100644 --- a/drivers/staging/rtl8192e/ieee80211/ieee80211.h +++ b/drivers/staging/rtl8192e/ieee80211/ieee80211.h @@ -333,8 +333,8 @@ enum _ReasonCode{ #define ieee80211_rx_mgt ieee80211_rx_mgt_rsl #define ieee80211_get_beacon ieee80211_get_beacon_rsl -#define ieee80211_wake_queue ieee80211_wake_queue_rsl -#define ieee80211_stop_queue ieee80211_stop_queue_rsl +#define ieee80211_rtl_wake_queue ieee80211_rtl_wake_queue_rsl +#define ieee80211_rtl_stop_queue ieee80211_rtl_stop_queue_rsl #define ieee80211_reset_queue ieee80211_reset_queue_rsl #define ieee80211_softmac_stop_protocol ieee80211_softmac_stop_protocol_rsl #define ieee80211_softmac_start_protocol ieee80211_softmac_start_protocol_rsl @@ -2546,13 +2546,13 @@ extern int ieee80211_encrypt_fragment( struct sk_buff *frag, int hdr_len); -extern int ieee80211_xmit(struct sk_buff *skb, +extern int ieee80211_rtl_xmit(struct sk_buff *skb, struct net_device *dev); extern void ieee80211_txb_free(struct ieee80211_txb *); /* ieee80211_rx.c */ -extern int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb, +extern int ieee80211_rtl_rx(struct ieee80211_device *ieee, struct sk_buff *skb, struct ieee80211_rx_stats *rx_stats); extern void ieee80211_rx_mgt(struct ieee80211_device *ieee, struct ieee80211_hdr_4addr *header, @@ -2613,8 +2613,8 @@ extern void ieee80211_stop_protocol(struct ieee80211_device *ieee); extern void ieee80211_softmac_start_protocol(struct ieee80211_device *ieee); extern void ieee80211_softmac_stop_protocol(struct ieee80211_device *ieee); extern void ieee80211_reset_queue(struct ieee80211_device *ieee); -extern void ieee80211_wake_queue(struct ieee80211_device *ieee); -extern void ieee80211_stop_queue(struct ieee80211_device *ieee); +extern void ieee80211_rtl_wake_queue(struct ieee80211_device *ieee); +extern void ieee80211_rtl_stop_queue(struct ieee80211_device *ieee); extern struct sk_buff *ieee80211_get_beacon(struct ieee80211_device *ieee); extern void ieee80211_start_send_beacons(struct ieee80211_device *ieee); extern void ieee80211_stop_send_beacons(struct ieee80211_device *ieee); diff --git a/drivers/staging/rtl8192e/ieee80211/ieee80211_module.c b/drivers/staging/rtl8192e/ieee80211/ieee80211_module.c index 2644155737a8..f43a7db5c78b 100644 --- a/drivers/staging/rtl8192e/ieee80211/ieee80211_module.c +++ b/drivers/staging/rtl8192e/ieee80211/ieee80211_module.c @@ -119,7 +119,7 @@ struct net_device *alloc_ieee80211(int sizeof_priv) ieee = (struct ieee80211_device *)dev->priv; #endif #if 0 - dev->hard_start_xmit = ieee80211_xmit; + dev->hard_start_xmit = ieee80211_rtl_xmit; #endif memset(ieee, 0, sizeof(struct ieee80211_device)+sizeof_priv); @@ -333,7 +333,7 @@ extern void ieee80211_crypto_ccmp_exit(void); extern int ieee80211_crypto_wep_init(void); extern void ieee80211_crypto_wep_exit(void); -int __init ieee80211_init(void) +int __init ieee80211_rtl_init(void) { struct proc_dir_entry *e; int retval; @@ -389,7 +389,7 @@ int __init ieee80211_init(void) return 0; } -void __exit ieee80211_exit(void) +void __exit ieee80211_rtl_exit(void) { if (ieee80211_proc) { remove_proc_entry("debug_level", ieee80211_proc); @@ -412,8 +412,8 @@ module_param(debug, int, 0444); MODULE_PARM_DESC(debug, "debug output mask"); -//module_exit(ieee80211_exit); -//module_init(ieee80211_init); +//module_exit(ieee80211_rtl_exit); +//module_init(ieee80211_rtl_init); #endif #endif diff --git a/drivers/staging/rtl8192e/ieee80211/ieee80211_rx.c b/drivers/staging/rtl8192e/ieee80211/ieee80211_rx.c index 5dc478b86375..06d91715143c 100644 --- a/drivers/staging/rtl8192e/ieee80211/ieee80211_rx.c +++ b/drivers/staging/rtl8192e/ieee80211/ieee80211_rx.c @@ -923,7 +923,7 @@ u8 parse_subframe(struct sk_buff *skb, /* All received frames are sent to this function. @skb contains the frame in * IEEE 802.11 format, i.e., in the format it was sent over air. * This function is called only as a tasklet (software IRQ). */ -int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb, +int ieee80211_rtl_rx(struct ieee80211_device *ieee, struct sk_buff *skb, struct ieee80211_rx_stats *rx_stats) { struct net_device *dev = ieee->dev; diff --git a/drivers/staging/rtl8192e/ieee80211/ieee80211_softmac.c b/drivers/staging/rtl8192e/ieee80211/ieee80211_softmac.c index 593d22825184..6d1ddec39f0e 100644 --- a/drivers/staging/rtl8192e/ieee80211/ieee80211_softmac.c +++ b/drivers/staging/rtl8192e/ieee80211/ieee80211_softmac.c @@ -684,7 +684,7 @@ void ieee80211_stop_scan(struct ieee80211_device *ieee) } /* called with ieee->lock held */ -void ieee80211_start_scan(struct ieee80211_device *ieee) +void ieee80211_rtl_start_scan(struct ieee80211_device *ieee) { #ifdef ENABLE_DOT11D if(IS_DOT11D_ENABLE(ieee) ) @@ -1430,7 +1430,7 @@ void ieee80211_associate_step1(struct ieee80211_device *ieee) } } -void ieee80211_auth_challenge(struct ieee80211_device *ieee, u8 *challenge, int chlen) +void ieee80211_rtl_auth_challenge(struct ieee80211_device *ieee, u8 *challenge, int chlen) { u8 *c; struct sk_buff *skb; @@ -2262,7 +2262,7 @@ ieee80211_rx_frame_softmac(struct ieee80211_device *ieee, struct sk_buff *skb, ieee80211_associate_step2(ieee); }else{ - ieee80211_auth_challenge(ieee, challenge, chlen); + ieee80211_rtl_auth_challenge(ieee, challenge, chlen); } }else{ ieee->softmac_stats.rx_auth_rs_err++; @@ -2376,7 +2376,7 @@ void ieee80211_softmac_xmit(struct ieee80211_txb *txb, struct ieee80211_device * * to check it any more. * */ //printk("error:no descriptor left@queue_index %d\n", queue_index); - //ieee80211_stop_queue(ieee); + //ieee80211_rtl_stop_queue(ieee); #ifdef USB_TX_DRIVER_AGGREGATION_ENABLE skb_queue_tail(&ieee->skb_drv_aggQ[queue_index], txb->fragments[i]); #else @@ -2440,7 +2440,7 @@ void ieee80211_reset_queue(struct ieee80211_device *ieee) } -void ieee80211_wake_queue(struct ieee80211_device *ieee) +void ieee80211_rtl_wake_queue(struct ieee80211_device *ieee) { unsigned long flags; @@ -2481,7 +2481,7 @@ exit : } -void ieee80211_stop_queue(struct ieee80211_device *ieee) +void ieee80211_rtl_stop_queue(struct ieee80211_device *ieee) { //unsigned long flags; //spin_lock_irqsave(&ieee->lock,flags); @@ -2706,7 +2706,7 @@ void ieee80211_start_bss(struct ieee80211_device *ieee) if (ieee->state == IEEE80211_NOLINK){ ieee->actscanning = true; - ieee80211_start_scan(ieee); + ieee80211_rtl_start_scan(ieee); } spin_unlock_irqrestore(&ieee->lock, flags); } @@ -2775,7 +2775,7 @@ void ieee80211_associate_retry_wq(struct ieee80211_device *ieee) { ieee->is_roaming= false; ieee->actscanning = true; - ieee80211_start_scan(ieee); + ieee80211_rtl_start_scan(ieee); } spin_unlock_irqrestore(&ieee->lock, flags); @@ -3497,8 +3497,8 @@ void notify_wx_assoc_event(struct ieee80211_device *ieee) #if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)) //EXPORT_SYMBOL(ieee80211_get_beacon); -//EXPORT_SYMBOL(ieee80211_wake_queue); -//EXPORT_SYMBOL(ieee80211_stop_queue); +//EXPORT_SYMBOL(ieee80211_rtl_wake_queue); +//EXPORT_SYMBOL(ieee80211_rtl_stop_queue); //EXPORT_SYMBOL(ieee80211_reset_queue); //EXPORT_SYMBOL(ieee80211_softmac_stop_protocol); //EXPORT_SYMBOL(ieee80211_softmac_start_protocol); @@ -3518,8 +3518,8 @@ void notify_wx_assoc_event(struct ieee80211_device *ieee) //EXPORT_SYMBOL(ieee80211_start_scan_syncro); #else EXPORT_SYMBOL_NOVERS(ieee80211_get_beacon); -EXPORT_SYMBOL_NOVERS(ieee80211_wake_queue); -EXPORT_SYMBOL_NOVERS(ieee80211_stop_queue); +EXPORT_SYMBOL_NOVERS(ieee80211_rtl_wake_queue); +EXPORT_SYMBOL_NOVERS(ieee80211_rtl_stop_queue); EXPORT_SYMBOL_NOVERS(ieee80211_reset_queue); EXPORT_SYMBOL_NOVERS(ieee80211_softmac_stop_protocol); EXPORT_SYMBOL_NOVERS(ieee80211_softmac_start_protocol); diff --git a/drivers/staging/rtl8192e/ieee80211/ieee80211_tx.c b/drivers/staging/rtl8192e/ieee80211/ieee80211_tx.c index 103b33c093f5..798fb4154c25 100644 --- a/drivers/staging/rtl8192e/ieee80211/ieee80211_tx.c +++ b/drivers/staging/rtl8192e/ieee80211/ieee80211_tx.c @@ -604,7 +604,7 @@ void ieee80211_query_seqnum(struct ieee80211_device*ieee, struct sk_buff* skb, u } } -int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev) +int ieee80211_rtl_xmit(struct sk_buff *skb, struct net_device *dev) { #if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)) struct ieee80211_device *ieee = netdev_priv(dev); diff --git a/drivers/staging/rtl8192e/ieee80211/ieee80211_wx.c b/drivers/staging/rtl8192e/ieee80211/ieee80211_wx.c index 4e34a1f4c66b..3441b72dd8fa 100644 --- a/drivers/staging/rtl8192e/ieee80211/ieee80211_wx.c +++ b/drivers/staging/rtl8192e/ieee80211/ieee80211_wx.c @@ -976,7 +976,7 @@ int ieee80211_wx_set_gen_ie(struct ieee80211_device *ieee, u8 *ie, size_t len) { if (len != ie[1]+2) { - printk("len:%d, ie:%d\n", len, ie[1]); + printk("len:%zu, ie:%d\n", len, ie[1]); return -EINVAL; } buf = kmalloc(len, GFP_KERNEL); diff --git a/drivers/staging/rtl8192e/ieee80211/rtl819x_BAProc.c b/drivers/staging/rtl8192e/ieee80211/rtl819x_BAProc.c index 98b3bb6b6d69..e41e8a0c739c 100644 --- a/drivers/staging/rtl8192e/ieee80211/rtl819x_BAProc.c +++ b/drivers/staging/rtl8192e/ieee80211/rtl819x_BAProc.c @@ -382,7 +382,7 @@ int ieee80211_rx_ADDBAReq( struct ieee80211_device* ieee, struct sk_buff *skb) if (skb->len < sizeof( struct ieee80211_hdr_3addr) + 9) { - IEEE80211_DEBUG(IEEE80211_DL_ERR, " Invalid skb len in BAREQ(%d / %d)\n", skb->len, (sizeof( struct ieee80211_hdr_3addr) + 9)); + IEEE80211_DEBUG(IEEE80211_DL_ERR, " Invalid skb len in BAREQ(%d / %zu)\n", skb->len, (sizeof( struct ieee80211_hdr_3addr) + 9)); return -1; } @@ -481,7 +481,7 @@ int ieee80211_rx_ADDBARsp( struct ieee80211_device* ieee, struct sk_buff *skb) if (skb->len < sizeof( struct ieee80211_hdr_3addr) + 9) { - IEEE80211_DEBUG(IEEE80211_DL_ERR, " Invalid skb len in BARSP(%d / %d)\n", skb->len, (sizeof( struct ieee80211_hdr_3addr) + 9)); + IEEE80211_DEBUG(IEEE80211_DL_ERR, " Invalid skb len in BARSP(%d / %zu)\n", skb->len, (sizeof( struct ieee80211_hdr_3addr) + 9)); return -1; } rsp = ( struct ieee80211_hdr_3addr*)skb->data; @@ -611,7 +611,7 @@ int ieee80211_rx_DELBA(struct ieee80211_device* ieee,struct sk_buff *skb) if (skb->len < sizeof( struct ieee80211_hdr_3addr) + 6) { - IEEE80211_DEBUG(IEEE80211_DL_ERR, " Invalid skb len in DELBA(%d / %d)\n", skb->len, (sizeof( struct ieee80211_hdr_3addr) + 6)); + IEEE80211_DEBUG(IEEE80211_DL_ERR, " Invalid skb len in DELBA(%d / %zu)\n", skb->len, (sizeof( struct ieee80211_hdr_3addr) + 6)); return -1; } diff --git a/drivers/staging/rtl8192e/r8192E_core.c b/drivers/staging/rtl8192e/r8192E_core.c index ff8fe7e32a92..0ca5d8b4f746 100644 --- a/drivers/staging/rtl8192e/r8192E_core.c +++ b/drivers/staging/rtl8192e/r8192E_core.c @@ -5795,7 +5795,7 @@ static void rtl8192_rx(struct net_device *dev) stats.fragoffset = 0; stats.ntotalfrag = 1; - if(!ieee80211_rx(priv->ieee80211, skb, &stats)){ + if(!ieee80211_rtl_rx(priv->ieee80211, skb, &stats)){ dev_kfree_skb_any(skb); } else { priv->stats.rxok++; @@ -5837,7 +5837,7 @@ static const struct net_device_ops rtl8192_netdev_ops = { .ndo_do_ioctl = rtl8192_ioctl, .ndo_set_multicast_list = r8192_set_multicast, .ndo_set_mac_address = r8192_set_mac_adr, - .ndo_start_xmit = ieee80211_xmit, + .ndo_start_xmit = ieee80211_rtl_xmit, }; /**************************************************************************** @@ -6121,14 +6121,14 @@ static void __devexit rtl8192_pci_disconnect(struct pci_dev *pdev) RT_TRACE(COMP_DOWN, "wlan driver removed\n"); } -extern int ieee80211_init(void); -extern void ieee80211_exit(void); +extern int ieee80211_rtl_init(void); +extern void ieee80211_rtl_exit(void); static int __init rtl8192_pci_module_init(void) { int retval; - retval = ieee80211_init(); + retval = ieee80211_rtl_init(); if (retval) return retval; @@ -6153,7 +6153,7 @@ static void __exit rtl8192_pci_module_exit(void) RT_TRACE(COMP_DOWN, "Exiting"); rtl8192_proc_module_remove(); - ieee80211_exit(); + ieee80211_rtl_exit(); } //warning message WB @@ -6313,7 +6313,7 @@ void rtl8192_try_wake_queue(struct net_device *dev, int pri) spin_unlock_irqrestore(&priv->tx_lock,flags); if(enough_desc) - ieee80211_wake_queue(priv->ieee80211); + ieee80211_rtl_wake_queue(priv->ieee80211); #endif } diff --git a/drivers/staging/rtl8192su/ieee80211/ieee80211.h b/drivers/staging/rtl8192su/ieee80211/ieee80211.h index f22d024b1c39..9a4c858b0666 100644 --- a/drivers/staging/rtl8192su/ieee80211/ieee80211.h +++ b/drivers/staging/rtl8192su/ieee80211/ieee80211.h @@ -1721,13 +1721,13 @@ extern int ieee80211_encrypt_fragment( struct sk_buff *frag, int hdr_len); -extern int rtl8192_ieee80211_xmit(struct sk_buff *skb, +extern int rtl8192_ieee80211_rtl_xmit(struct sk_buff *skb, struct net_device *dev); extern void ieee80211_txb_free(struct ieee80211_txb *); /* ieee80211_rx.c */ -extern int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb, +extern int ieee80211_rtl_rx(struct ieee80211_device *ieee, struct sk_buff *skb, struct ieee80211_rx_stats *rx_stats); extern void ieee80211_rx_mgt(struct ieee80211_device *ieee, struct ieee80211_hdr_4addr *header, @@ -1783,8 +1783,8 @@ extern void ieee80211_stop_protocol(struct ieee80211_device *ieee); extern void ieee80211_softmac_start_protocol(struct ieee80211_device *ieee); extern void ieee80211_softmac_stop_protocol(struct ieee80211_device *ieee); extern void ieee80211_reset_queue(struct ieee80211_device *ieee); -extern void ieee80211_wake_queue(struct ieee80211_device *ieee); -extern void ieee80211_stop_queue(struct ieee80211_device *ieee); +extern void ieee80211_rtl_wake_queue(struct ieee80211_device *ieee); +extern void ieee80211_rtl_stop_queue(struct ieee80211_device *ieee); extern struct sk_buff *ieee80211_get_beacon(struct ieee80211_device *ieee); extern void ieee80211_start_send_beacons(struct ieee80211_device *ieee); extern void ieee80211_stop_send_beacons(struct ieee80211_device *ieee); diff --git a/drivers/staging/rtl8192su/ieee80211/ieee80211_rx.c b/drivers/staging/rtl8192su/ieee80211/ieee80211_rx.c index ac223cef1d33..fecfa120ff48 100644 --- a/drivers/staging/rtl8192su/ieee80211/ieee80211_rx.c +++ b/drivers/staging/rtl8192su/ieee80211/ieee80211_rx.c @@ -208,7 +208,7 @@ static int ieee80211_frag_cache_invalidate(struct ieee80211_device *ieee, * * Responsible for handling management control frames * - * Called by ieee80211_rx */ + * Called by ieee80211_rtl_rx */ static inline int ieee80211_rx_frame_mgmt(struct ieee80211_device *ieee, struct sk_buff *skb, struct ieee80211_rx_stats *rx_stats, u16 type, @@ -289,7 +289,7 @@ static int ieee80211_is_eapol_frame(struct ieee80211_device *ieee, return 0; } -/* Called only as a tasklet (software IRQ), by ieee80211_rx */ +/* Called only as a tasklet (software IRQ), by ieee80211_rtl_rx */ static inline int ieee80211_rx_frame_decrypt(struct ieee80211_device* ieee, struct sk_buff *skb, struct ieee80211_crypt_data *crypt) @@ -858,7 +858,7 @@ u8 parse_subframe(struct sk_buff *skb, /* All received frames are sent to this function. @skb contains the frame in * IEEE 802.11 format, i.e., in the format it was sent over air. * This function is called only as a tasklet (software IRQ). */ -int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb, +int ieee80211_rtl_rx(struct ieee80211_device *ieee, struct sk_buff *skb, struct ieee80211_rx_stats *rx_stats) { struct net_device *dev = ieee->dev; diff --git a/drivers/staging/rtl8192su/ieee80211/ieee80211_softmac.c b/drivers/staging/rtl8192su/ieee80211/ieee80211_softmac.c index 203c0a5cc8c1..95d4f84dcf3f 100644 --- a/drivers/staging/rtl8192su/ieee80211/ieee80211_softmac.c +++ b/drivers/staging/rtl8192su/ieee80211/ieee80211_softmac.c @@ -610,7 +610,7 @@ void ieee80211_stop_scan(struct ieee80211_device *ieee) } /* called with ieee->lock held */ -void ieee80211_start_scan(struct ieee80211_device *ieee) +void ieee80211_rtl_start_scan(struct ieee80211_device *ieee) { if(IS_DOT11D_ENABLE(ieee) ) { @@ -1281,7 +1281,7 @@ void ieee80211_associate_step1(struct ieee80211_device *ieee) } } -void ieee80211_auth_challenge(struct ieee80211_device *ieee, u8 *challenge, int chlen) +void ieee80211_rtl_auth_challenge(struct ieee80211_device *ieee, u8 *challenge, int chlen) { u8 *c; struct sk_buff *skb; @@ -2054,7 +2054,7 @@ ieee80211_rx_frame_softmac(struct ieee80211_device *ieee, struct sk_buff *skb, ieee80211_associate_step2(ieee); }else{ - ieee80211_auth_challenge(ieee, challenge, chlen); + ieee80211_rtl_auth_challenge(ieee, challenge, chlen); } }else{ ieee->softmac_stats.rx_auth_rs_err++; @@ -2162,7 +2162,7 @@ void ieee80211_softmac_xmit(struct ieee80211_txb *txb, struct ieee80211_device * * to check it any more. * */ //printk("error:no descriptor left@queue_index %d, %d, %d\n", queue_index, skb_queue_len(&ieee->skb_waitQ[queue_index]), ieee->check_nic_enough_desc(ieee->dev,queue_index)); - //ieee80211_stop_queue(ieee); + //ieee80211_rtl_stop_queue(ieee); skb_queue_tail(&ieee->skb_waitQ[queue_index], txb->fragments[i]); }else{ ieee->softmac_data_hard_start_xmit( @@ -2222,7 +2222,7 @@ void ieee80211_reset_queue(struct ieee80211_device *ieee) } -void ieee80211_wake_queue(struct ieee80211_device *ieee) +void ieee80211_rtl_wake_queue(struct ieee80211_device *ieee) { unsigned long flags; @@ -2263,7 +2263,7 @@ exit : } -void ieee80211_stop_queue(struct ieee80211_device *ieee) +void ieee80211_rtl_stop_queue(struct ieee80211_device *ieee) { //unsigned long flags; //spin_lock_irqsave(&ieee->lock,flags); @@ -2479,7 +2479,7 @@ void ieee80211_start_bss(struct ieee80211_device *ieee) if (ieee->state == IEEE80211_NOLINK){ ieee->actscanning = true; - ieee80211_start_scan(ieee); + ieee80211_rtl_start_scan(ieee); } spin_unlock_irqrestore(&ieee->lock, flags); } @@ -2552,7 +2552,7 @@ void ieee80211_associate_retry_wq(struct work_struct *work) if(ieee->state == IEEE80211_NOLINK) { ieee->actscanning = true; - ieee80211_start_scan(ieee); + ieee80211_rtl_start_scan(ieee); } spin_unlock_irqrestore(&ieee->lock, flags); diff --git a/drivers/staging/rtl8192su/ieee80211/ieee80211_tx.c b/drivers/staging/rtl8192su/ieee80211/ieee80211_tx.c index 60621d6b2a6b..4d54e1e62d22 100644 --- a/drivers/staging/rtl8192su/ieee80211/ieee80211_tx.c +++ b/drivers/staging/rtl8192su/ieee80211/ieee80211_tx.c @@ -604,7 +604,7 @@ void ieee80211_query_seqnum(struct ieee80211_device*ieee, struct sk_buff* skb, u } } -int rtl8192_ieee80211_xmit(struct sk_buff *skb, struct net_device *dev) +int rtl8192_ieee80211_rtl_xmit(struct sk_buff *skb, struct net_device *dev) { struct ieee80211_device *ieee = netdev_priv(dev); struct ieee80211_txb *txb = NULL; diff --git a/drivers/staging/rtl8192su/r8192U_core.c b/drivers/staging/rtl8192su/r8192U_core.c index 66274d7666ff..ccb9d5b8cd44 100644 --- a/drivers/staging/rtl8192su/r8192U_core.c +++ b/drivers/staging/rtl8192su/r8192U_core.c @@ -126,6 +126,8 @@ static struct usb_device_id rtl8192_usb_id_tbl[] = { {USB_DEVICE(0x2001, 0x3301)}, /* Zinwell */ {USB_DEVICE(0x5a57, 0x0290)}, + /* Guillemot */ + {USB_DEVICE(0x06f8, 0xe031)}, //92SU {USB_DEVICE(0x0bda, 0x8172)}, {} @@ -1501,7 +1503,7 @@ static void rtl8192_rx_isr(struct urb *urb) urb->context = skb; skb_queue_tail(&priv->rx_queue, skb); err = usb_submit_urb(urb, GFP_ATOMIC); - if(err && err != EPERM) + if(err && err != -EPERM) printk("can not submit rxurb, err is %x,URB status is %x\n",err,urb->status); } @@ -7155,7 +7157,7 @@ void rtl8192SU_rx_nomal(struct sk_buff* skb) unicast_packet = true; } - if(!ieee80211_rx(priv->ieee80211,skb, &stats)) { + if(!ieee80211_rtl_rx(priv->ieee80211,skb, &stats)) { dev_kfree_skb_any(skb); } else { // priv->stats.rxoktotal++; //YJ,test,090108 @@ -7426,7 +7428,7 @@ static const struct net_device_ops rtl8192_netdev_ops = { .ndo_set_mac_address = r8192_set_mac_adr, .ndo_validate_addr = eth_validate_addr, .ndo_change_mtu = eth_change_mtu, - .ndo_start_xmit = rtl8192_ieee80211_xmit, + .ndo_start_xmit = rtl8192_ieee80211_rtl_xmit, }; static int __devinit rtl8192_usb_probe(struct usb_interface *intf, @@ -7619,7 +7621,7 @@ void rtl8192_try_wake_queue(struct net_device *dev, int pri) spin_unlock_irqrestore(&priv->tx_lock,flags); if(enough_desc) - ieee80211_wake_queue(priv->ieee80211); + ieee80211_rtl_wake_queue(priv->ieee80211); } void EnableHWSecurityConfig8192(struct net_device *dev) diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_wx.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_wx.c index d397f1d68eb7..5f12d62658c9 100644 --- a/drivers/staging/rtl8192u/ieee80211/ieee80211_wx.c +++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_wx.c @@ -845,7 +845,7 @@ int ieee80211_wx_set_gen_ie(struct ieee80211_device *ieee, u8 *ie, size_t len) { if (len != ie[1]+2) { - printk("len:%d, ie:%d\n", len, ie[1]); + printk("len:%zu, ie:%d\n", len, ie[1]); return -EINVAL; } buf = kmalloc(len, GFP_KERNEL); diff --git a/drivers/staging/rtl8192u/ieee80211/rtl819x_BAProc.c b/drivers/staging/rtl8192u/ieee80211/rtl819x_BAProc.c index 26af43bb8390..512a57aebde3 100644 --- a/drivers/staging/rtl8192u/ieee80211/rtl819x_BAProc.c +++ b/drivers/staging/rtl8192u/ieee80211/rtl819x_BAProc.c @@ -340,7 +340,7 @@ int ieee80211_rx_ADDBAReq( struct ieee80211_device* ieee, struct sk_buff *skb) if (skb->len < sizeof( struct ieee80211_hdr_3addr) + 9) { - IEEE80211_DEBUG(IEEE80211_DL_ERR, " Invalid skb len in BAREQ(%d / %d)\n", skb->len, (sizeof( struct ieee80211_hdr_3addr) + 9)); + IEEE80211_DEBUG(IEEE80211_DL_ERR, " Invalid skb len in BAREQ(%d / %zu)\n", skb->len, (sizeof( struct ieee80211_hdr_3addr) + 9)); return -1; } @@ -439,7 +439,7 @@ int ieee80211_rx_ADDBARsp( struct ieee80211_device* ieee, struct sk_buff *skb) if (skb->len < sizeof( struct ieee80211_hdr_3addr) + 9) { - IEEE80211_DEBUG(IEEE80211_DL_ERR, " Invalid skb len in BARSP(%d / %d)\n", skb->len, (sizeof( struct ieee80211_hdr_3addr) + 9)); + IEEE80211_DEBUG(IEEE80211_DL_ERR, " Invalid skb len in BARSP(%d / %zu)\n", skb->len, (sizeof( struct ieee80211_hdr_3addr) + 9)); return -1; } rsp = ( struct ieee80211_hdr_3addr*)skb->data; @@ -569,7 +569,7 @@ int ieee80211_rx_DELBA(struct ieee80211_device* ieee,struct sk_buff *skb) if (skb->len < sizeof( struct ieee80211_hdr_3addr) + 6) { - IEEE80211_DEBUG(IEEE80211_DL_ERR, " Invalid skb len in DELBA(%d / %d)\n", skb->len, (sizeof( struct ieee80211_hdr_3addr) + 6)); + IEEE80211_DEBUG(IEEE80211_DL_ERR, " Invalid skb len in DELBA(%d / %zu)\n", skb->len, (sizeof( struct ieee80211_hdr_3addr) + 6)); return -1; } diff --git a/drivers/staging/sm7xx/Kconfig b/drivers/staging/sm7xx/Kconfig new file mode 100644 index 000000000000..204dbfc3c38b --- /dev/null +++ b/drivers/staging/sm7xx/Kconfig @@ -0,0 +1,15 @@ +config FB_SM7XX + tristate "Silicon Motion SM7XX Frame Buffer Support" + depends on FB + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + help + Frame Buffer driver for the Silicon Motion SM7XX serial graphic card. + +config FB_SM7XX_ACCEL + bool "Siliconmotion Acceleration functions (EXPERIMENTAL)" + depends on FB_SM7XX && EXPERIMENTAL + help + This will compile the Trident frame buffer device with + acceleration functions. diff --git a/drivers/staging/sm7xx/Makefile b/drivers/staging/sm7xx/Makefile new file mode 100644 index 000000000000..f43cb9106305 --- /dev/null +++ b/drivers/staging/sm7xx/Makefile @@ -0,0 +1,3 @@ +obj-$(CONFIG_FB_SM7XX) += sm7xx.o + +sm7xx-y := smtcfb.o diff --git a/drivers/staging/sm7xx/TODO b/drivers/staging/sm7xx/TODO new file mode 100644 index 000000000000..1f61f5e11cf5 --- /dev/null +++ b/drivers/staging/sm7xx/TODO @@ -0,0 +1,10 @@ +TODO: +- Dual head support +- use kernel coding style +- checkpatch.pl clean +- refine the code and remove unused code +- use kernel framebuffer mode setting instead of hard code +- move it to drivers/video/sm7xx/ or make it be drivers/video/sm7xxfb.c + +Please send any patches to Greg Kroah-Hartman <greg@kroah.com> and +Teddy Wang <teddy.wang@siliconmotion.com.cn>. diff --git a/drivers/staging/sm7xx/smtc2d.c b/drivers/staging/sm7xx/smtc2d.c new file mode 100644 index 000000000000..133b86c6a678 --- /dev/null +++ b/drivers/staging/sm7xx/smtc2d.c @@ -0,0 +1,979 @@ +/* + * Silicon Motion SM7XX 2D drawing engine functions. + * + * Copyright (C) 2006 Silicon Motion Technology Corp. + * Author: Boyod boyod.yang@siliconmotion.com.cn + * + * Copyright (C) 2009 Lemote, Inc. + * Author: Wu Zhangjin, wuzj@lemote.com + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive for + * more details. + * + * Version 0.10.26192.21.01 + * - Add PowerPC support + * - Add 2D support for Lynx - + * Verified on 2.6.19.2 + * Boyod.yang <boyod.yang@siliconmotion.com.cn> + */ + +unsigned char smtc_de_busy; + +void SMTC_write2Dreg(unsigned long nOffset, unsigned long nData) +{ + writel(nData, smtc_2DBaseAddress + nOffset); +} + +unsigned long SMTC_read2Dreg(unsigned long nOffset) +{ + return readl(smtc_2DBaseAddress + nOffset); +} + +void SMTC_write2Ddataport(unsigned long nOffset, unsigned long nData) +{ + writel(nData, smtc_2Ddataport + nOffset); +} + +/********************************************************************** + * + * deInit + * + * Purpose + * Drawing engine initialization. + * + **********************************************************************/ + +void deInit(unsigned int nModeWidth, unsigned int nModeHeight, + unsigned int bpp) +{ + /* Get current power configuration. */ + unsigned char clock; + clock = smtc_seqr(0x21); + + /* initialize global 'mutex lock' variable */ + smtc_de_busy = 0; + + /* Enable 2D Drawing Engine */ + smtc_seqw(0x21, clock & 0xF8); + + SMTC_write2Dreg(DE_CLIP_TL, + FIELD_VALUE(0, DE_CLIP_TL, TOP, 0) | + FIELD_SET(0, DE_CLIP_TL, STATUS, DISABLE) | + FIELD_SET(0, DE_CLIP_TL, INHIBIT, OUTSIDE) | + FIELD_VALUE(0, DE_CLIP_TL, LEFT, 0)); + + if (bpp >= 24) { + SMTC_write2Dreg(DE_PITCH, + FIELD_VALUE(0, DE_PITCH, DESTINATION, + nModeWidth * 3) | FIELD_VALUE(0, + DE_PITCH, + SOURCE, + nModeWidth + * 3)); + } else { + SMTC_write2Dreg(DE_PITCH, + FIELD_VALUE(0, DE_PITCH, DESTINATION, + nModeWidth) | FIELD_VALUE(0, + DE_PITCH, + SOURCE, + nModeWidth)); + } + + SMTC_write2Dreg(DE_WINDOW_WIDTH, + FIELD_VALUE(0, DE_WINDOW_WIDTH, DESTINATION, + nModeWidth) | FIELD_VALUE(0, + DE_WINDOW_WIDTH, + SOURCE, + nModeWidth)); + + switch (bpp) { + case 8: + SMTC_write2Dreg(DE_STRETCH_FORMAT, + FIELD_SET(0, DE_STRETCH_FORMAT, PATTERN_XY, + NORMAL) | FIELD_VALUE(0, + DE_STRETCH_FORMAT, + PATTERN_Y, + 0) | + FIELD_VALUE(0, DE_STRETCH_FORMAT, PATTERN_X, + 0) | FIELD_SET(0, DE_STRETCH_FORMAT, + PIXEL_FORMAT, + 8) | FIELD_SET(0, + DE_STRETCH_FORMAT, + ADDRESSING, + XY) | + FIELD_VALUE(0, DE_STRETCH_FORMAT, + SOURCE_HEIGHT, 3)); + break; + case 24: + SMTC_write2Dreg(DE_STRETCH_FORMAT, + FIELD_SET(0, DE_STRETCH_FORMAT, PATTERN_XY, + NORMAL) | FIELD_VALUE(0, + DE_STRETCH_FORMAT, + PATTERN_Y, + 0) | + FIELD_VALUE(0, DE_STRETCH_FORMAT, PATTERN_X, + 0) | FIELD_SET(0, DE_STRETCH_FORMAT, + PIXEL_FORMAT, + 24) | FIELD_SET(0, + DE_STRETCH_FORMAT, + ADDRESSING, + XY) | + FIELD_VALUE(0, DE_STRETCH_FORMAT, + SOURCE_HEIGHT, 3)); + break; + case 16: + default: + SMTC_write2Dreg(DE_STRETCH_FORMAT, + FIELD_SET(0, DE_STRETCH_FORMAT, PATTERN_XY, + NORMAL) | FIELD_VALUE(0, + DE_STRETCH_FORMAT, + PATTERN_Y, + 0) | + FIELD_VALUE(0, DE_STRETCH_FORMAT, PATTERN_X, + 0) | FIELD_SET(0, DE_STRETCH_FORMAT, + PIXEL_FORMAT, + 16) | FIELD_SET(0, + DE_STRETCH_FORMAT, + ADDRESSING, + XY) | + FIELD_VALUE(0, DE_STRETCH_FORMAT, + SOURCE_HEIGHT, 3)); + break; + } + + SMTC_write2Dreg(DE_MASKS, + FIELD_VALUE(0, DE_MASKS, BYTE_MASK, 0xFFFF) | + FIELD_VALUE(0, DE_MASKS, BIT_MASK, 0xFFFF)); + SMTC_write2Dreg(DE_COLOR_COMPARE_MASK, + FIELD_VALUE(0, DE_COLOR_COMPARE_MASK, MASKS, \ + 0xFFFFFF)); + SMTC_write2Dreg(DE_COLOR_COMPARE, + FIELD_VALUE(0, DE_COLOR_COMPARE, COLOR, 0xFFFFFF)); +} + +void deVerticalLine(unsigned long dst_base, + unsigned long dst_pitch, + unsigned long nX, + unsigned long nY, + unsigned long dst_height, unsigned long nColor) +{ + deWaitForNotBusy(); + + SMTC_write2Dreg(DE_WINDOW_DESTINATION_BASE, + FIELD_VALUE(0, DE_WINDOW_DESTINATION_BASE, ADDRESS, + dst_base)); + + SMTC_write2Dreg(DE_PITCH, + FIELD_VALUE(0, DE_PITCH, DESTINATION, dst_pitch) | + FIELD_VALUE(0, DE_PITCH, SOURCE, dst_pitch)); + + SMTC_write2Dreg(DE_WINDOW_WIDTH, + FIELD_VALUE(0, DE_WINDOW_WIDTH, DESTINATION, + dst_pitch) | FIELD_VALUE(0, DE_WINDOW_WIDTH, + SOURCE, + dst_pitch)); + + SMTC_write2Dreg(DE_FOREGROUND, + FIELD_VALUE(0, DE_FOREGROUND, COLOR, nColor)); + + SMTC_write2Dreg(DE_DESTINATION, + FIELD_SET(0, DE_DESTINATION, WRAP, DISABLE) | + FIELD_VALUE(0, DE_DESTINATION, X, nX) | + FIELD_VALUE(0, DE_DESTINATION, Y, nY)); + + SMTC_write2Dreg(DE_DIMENSION, + FIELD_VALUE(0, DE_DIMENSION, X, 1) | + FIELD_VALUE(0, DE_DIMENSION, Y_ET, dst_height)); + + SMTC_write2Dreg(DE_CONTROL, + FIELD_SET(0, DE_CONTROL, STATUS, START) | + FIELD_SET(0, DE_CONTROL, DIRECTION, LEFT_TO_RIGHT) | + FIELD_SET(0, DE_CONTROL, MAJOR, Y) | + FIELD_SET(0, DE_CONTROL, STEP_X, NEGATIVE) | + FIELD_SET(0, DE_CONTROL, STEP_Y, POSITIVE) | + FIELD_SET(0, DE_CONTROL, LAST_PIXEL, OFF) | + FIELD_SET(0, DE_CONTROL, COMMAND, SHORT_STROKE) | + FIELD_SET(0, DE_CONTROL, ROP_SELECT, ROP2) | + FIELD_VALUE(0, DE_CONTROL, ROP, 0x0C)); + + smtc_de_busy = 1; +} + +void deHorizontalLine(unsigned long dst_base, + unsigned long dst_pitch, + unsigned long nX, + unsigned long nY, + unsigned long dst_width, unsigned long nColor) +{ + deWaitForNotBusy(); + + SMTC_write2Dreg(DE_WINDOW_DESTINATION_BASE, + FIELD_VALUE(0, DE_WINDOW_DESTINATION_BASE, ADDRESS, + dst_base)); + + SMTC_write2Dreg(DE_PITCH, + FIELD_VALUE(0, DE_PITCH, DESTINATION, dst_pitch) | + FIELD_VALUE(0, DE_PITCH, SOURCE, dst_pitch)); + + SMTC_write2Dreg(DE_WINDOW_WIDTH, + FIELD_VALUE(0, DE_WINDOW_WIDTH, DESTINATION, + dst_pitch) | FIELD_VALUE(0, DE_WINDOW_WIDTH, + SOURCE, + dst_pitch)); + SMTC_write2Dreg(DE_FOREGROUND, + FIELD_VALUE(0, DE_FOREGROUND, COLOR, nColor)); + SMTC_write2Dreg(DE_DESTINATION, + FIELD_SET(0, DE_DESTINATION, WRAP, + DISABLE) | FIELD_VALUE(0, DE_DESTINATION, X, + nX) | FIELD_VALUE(0, + DE_DESTINATION, + Y, + nY)); + SMTC_write2Dreg(DE_DIMENSION, + FIELD_VALUE(0, DE_DIMENSION, X, + dst_width) | FIELD_VALUE(0, DE_DIMENSION, + Y_ET, 1)); + SMTC_write2Dreg(DE_CONTROL, + FIELD_SET(0, DE_CONTROL, STATUS, START) | FIELD_SET(0, + DE_CONTROL, + DIRECTION, + RIGHT_TO_LEFT) + | FIELD_SET(0, DE_CONTROL, MAJOR, X) | FIELD_SET(0, + DE_CONTROL, + STEP_X, + POSITIVE) + | FIELD_SET(0, DE_CONTROL, STEP_Y, + NEGATIVE) | FIELD_SET(0, DE_CONTROL, + LAST_PIXEL, + OFF) | FIELD_SET(0, + DE_CONTROL, + COMMAND, + SHORT_STROKE) + | FIELD_SET(0, DE_CONTROL, ROP_SELECT, + ROP2) | FIELD_VALUE(0, DE_CONTROL, ROP, + 0x0C)); + + smtc_de_busy = 1; +} + +void deLine(unsigned long dst_base, + unsigned long dst_pitch, + unsigned long nX1, + unsigned long nY1, + unsigned long nX2, unsigned long nY2, unsigned long nColor) +{ + unsigned long nCommand = + FIELD_SET(0, DE_CONTROL, STATUS, START) | + FIELD_SET(0, DE_CONTROL, DIRECTION, LEFT_TO_RIGHT) | + FIELD_SET(0, DE_CONTROL, MAJOR, X) | + FIELD_SET(0, DE_CONTROL, STEP_X, POSITIVE) | + FIELD_SET(0, DE_CONTROL, STEP_Y, POSITIVE) | + FIELD_SET(0, DE_CONTROL, LAST_PIXEL, OFF) | + FIELD_SET(0, DE_CONTROL, ROP_SELECT, ROP2) | + FIELD_VALUE(0, DE_CONTROL, ROP, 0x0C); + unsigned long DeltaX; + unsigned long DeltaY; + + /* Calculate delta X */ + if (nX1 <= nX2) + DeltaX = nX2 - nX1; + else { + DeltaX = nX1 - nX2; + nCommand = FIELD_SET(nCommand, DE_CONTROL, STEP_X, NEGATIVE); + } + + /* Calculate delta Y */ + if (nY1 <= nY2) + DeltaY = nY2 - nY1; + else { + DeltaY = nY1 - nY2; + nCommand = FIELD_SET(nCommand, DE_CONTROL, STEP_Y, NEGATIVE); + } + + /* Determine the major axis */ + if (DeltaX < DeltaY) + nCommand = FIELD_SET(nCommand, DE_CONTROL, MAJOR, Y); + + /* Vertical line? */ + if (nX1 == nX2) + deVerticalLine(dst_base, dst_pitch, nX1, nY1, DeltaY, nColor); + + /* Horizontal line? */ + else if (nY1 == nY2) + deHorizontalLine(dst_base, dst_pitch, nX1, nY1, \ + DeltaX, nColor); + + /* Diagonal line? */ + else if (DeltaX == DeltaY) { + deWaitForNotBusy(); + + SMTC_write2Dreg(DE_WINDOW_DESTINATION_BASE, + FIELD_VALUE(0, DE_WINDOW_DESTINATION_BASE, + ADDRESS, dst_base)); + + SMTC_write2Dreg(DE_PITCH, + FIELD_VALUE(0, DE_PITCH, DESTINATION, + dst_pitch) | FIELD_VALUE(0, + DE_PITCH, + SOURCE, + dst_pitch)); + + SMTC_write2Dreg(DE_WINDOW_WIDTH, + FIELD_VALUE(0, DE_WINDOW_WIDTH, DESTINATION, + dst_pitch) | FIELD_VALUE(0, + DE_WINDOW_WIDTH, + SOURCE, + dst_pitch)); + + SMTC_write2Dreg(DE_FOREGROUND, + FIELD_VALUE(0, DE_FOREGROUND, COLOR, nColor)); + + SMTC_write2Dreg(DE_DESTINATION, + FIELD_SET(0, DE_DESTINATION, WRAP, DISABLE) | + FIELD_VALUE(0, DE_DESTINATION, X, 1) | + FIELD_VALUE(0, DE_DESTINATION, Y, nY1)); + + SMTC_write2Dreg(DE_DIMENSION, + FIELD_VALUE(0, DE_DIMENSION, X, 1) | + FIELD_VALUE(0, DE_DIMENSION, Y_ET, DeltaX)); + + SMTC_write2Dreg(DE_CONTROL, + FIELD_SET(nCommand, DE_CONTROL, COMMAND, + SHORT_STROKE)); + } + + /* Generic line */ + else { + unsigned int k1, k2, et, w; + if (DeltaX < DeltaY) { + k1 = 2 * DeltaX; + et = k1 - DeltaY; + k2 = et - DeltaY; + w = DeltaY + 1; + } else { + k1 = 2 * DeltaY; + et = k1 - DeltaX; + k2 = et - DeltaX; + w = DeltaX + 1; + } + + deWaitForNotBusy(); + + SMTC_write2Dreg(DE_WINDOW_DESTINATION_BASE, + FIELD_VALUE(0, DE_WINDOW_DESTINATION_BASE, + ADDRESS, dst_base)); + + SMTC_write2Dreg(DE_PITCH, + FIELD_VALUE(0, DE_PITCH, DESTINATION, + dst_pitch) | FIELD_VALUE(0, + DE_PITCH, + SOURCE, + dst_pitch)); + + SMTC_write2Dreg(DE_WINDOW_WIDTH, + FIELD_VALUE(0, DE_WINDOW_WIDTH, DESTINATION, + dst_pitch) | FIELD_VALUE(0, + DE_WINDOW_WIDTH, + SOURCE, + dst_pitch)); + + SMTC_write2Dreg(DE_FOREGROUND, + FIELD_VALUE(0, DE_FOREGROUND, COLOR, nColor)); + + SMTC_write2Dreg(DE_SOURCE, + FIELD_SET(0, DE_SOURCE, WRAP, DISABLE) | + FIELD_VALUE(0, DE_SOURCE, X_K1, k1) | + FIELD_VALUE(0, DE_SOURCE, Y_K2, k2)); + + SMTC_write2Dreg(DE_DESTINATION, + FIELD_SET(0, DE_DESTINATION, WRAP, DISABLE) | + FIELD_VALUE(0, DE_DESTINATION, X, nX1) | + FIELD_VALUE(0, DE_DESTINATION, Y, nY1)); + + SMTC_write2Dreg(DE_DIMENSION, + FIELD_VALUE(0, DE_DIMENSION, X, w) | + FIELD_VALUE(0, DE_DIMENSION, Y_ET, et)); + + SMTC_write2Dreg(DE_CONTROL, + FIELD_SET(nCommand, DE_CONTROL, COMMAND, + LINE_DRAW)); + } + + smtc_de_busy = 1; +} + +void deFillRect(unsigned long dst_base, + unsigned long dst_pitch, + unsigned long dst_X, + unsigned long dst_Y, + unsigned long dst_width, + unsigned long dst_height, unsigned long nColor) +{ + deWaitForNotBusy(); + + SMTC_write2Dreg(DE_WINDOW_DESTINATION_BASE, + FIELD_VALUE(0, DE_WINDOW_DESTINATION_BASE, ADDRESS, + dst_base)); + + if (dst_pitch) { + SMTC_write2Dreg(DE_PITCH, + FIELD_VALUE(0, DE_PITCH, DESTINATION, + dst_pitch) | FIELD_VALUE(0, + DE_PITCH, + SOURCE, + dst_pitch)); + + SMTC_write2Dreg(DE_WINDOW_WIDTH, + FIELD_VALUE(0, DE_WINDOW_WIDTH, DESTINATION, + dst_pitch) | FIELD_VALUE(0, + DE_WINDOW_WIDTH, + SOURCE, + dst_pitch)); + } + + SMTC_write2Dreg(DE_FOREGROUND, + FIELD_VALUE(0, DE_FOREGROUND, COLOR, nColor)); + + SMTC_write2Dreg(DE_DESTINATION, + FIELD_SET(0, DE_DESTINATION, WRAP, DISABLE) | + FIELD_VALUE(0, DE_DESTINATION, X, dst_X) | + FIELD_VALUE(0, DE_DESTINATION, Y, dst_Y)); + + SMTC_write2Dreg(DE_DIMENSION, + FIELD_VALUE(0, DE_DIMENSION, X, dst_width) | + FIELD_VALUE(0, DE_DIMENSION, Y_ET, dst_height)); + + SMTC_write2Dreg(DE_CONTROL, + FIELD_SET(0, DE_CONTROL, STATUS, START) | + FIELD_SET(0, DE_CONTROL, DIRECTION, LEFT_TO_RIGHT) | + FIELD_SET(0, DE_CONTROL, LAST_PIXEL, OFF) | + FIELD_SET(0, DE_CONTROL, COMMAND, RECTANGLE_FILL) | + FIELD_SET(0, DE_CONTROL, ROP_SELECT, ROP2) | + FIELD_VALUE(0, DE_CONTROL, ROP, 0x0C)); + + smtc_de_busy = 1; +} + +/********************************************************************** + * + * deRotatePattern + * + * Purpose + * Rotate the given pattern if necessary + * + * Parameters + * [in] + * pPattern - Pointer to DE_SURFACE structure containing + * pattern attributes + * patternX - X position (0-7) of pattern origin + * patternY - Y position (0-7) of pattern origin + * + * [out] + * pattern_dstaddr - Pointer to pre-allocated buffer containing + * rotated pattern + * + **********************************************************************/ +void deRotatePattern(unsigned char *pattern_dstaddr, + unsigned long pattern_src_addr, + unsigned long pattern_BPP, + unsigned long pattern_stride, int patternX, int patternY) +{ + unsigned int i; + unsigned long pattern[PATTERN_WIDTH * PATTERN_HEIGHT]; + unsigned int x, y; + unsigned char *pjPatByte; + + if (pattern_dstaddr != NULL) { + deWaitForNotBusy(); + + if (patternX || patternY) { + /* Rotate pattern */ + pjPatByte = (unsigned char *)pattern; + + switch (pattern_BPP) { + case 8: + { + for (y = 0; y < 8; y++) { + unsigned char *pjBuffer = + pattern_dstaddr + + ((patternY + y) & 7) * 8; + for (x = 0; x < 8; x++) { + pjBuffer[(patternX + + x) & 7] = + pjPatByte[x]; + } + pjPatByte += pattern_stride; + } + break; + } + + case 16: + { + for (y = 0; y < 8; y++) { + unsigned short *pjBuffer = + (unsigned short *) + pattern_dstaddr + + ((patternY + y) & 7) * 8; + for (x = 0; x < 8; x++) { + pjBuffer[(patternX + + x) & 7] = + ((unsigned short *) + pjPatByte)[x]; + } + pjPatByte += pattern_stride; + } + break; + } + + case 32: + { + for (y = 0; y < 8; y++) { + unsigned long *pjBuffer = + (unsigned long *) + pattern_dstaddr + + ((patternY + y) & 7) * 8; + for (x = 0; x < 8; x++) { + pjBuffer[(patternX + + x) & 7] = + ((unsigned long *) + pjPatByte)[x]; + } + pjPatByte += pattern_stride; + } + break; + } + } + } else { + /*Don't rotate,just copy pattern into pattern_dstaddr*/ + for (i = 0; i < (pattern_BPP * 2); i++) { + ((unsigned long *)pattern_dstaddr)[i] = + pattern[i]; + } + } + + } +} + +/********************************************************************** + * + * deCopy + * + * Purpose + * Copy a rectangular area of the source surface to a destination surface + * + * Remarks + * Source bitmap must have the same color depth (BPP) as the destination + * bitmap. + * +**********************************************************************/ +void deCopy(unsigned long dst_base, + unsigned long dst_pitch, + unsigned long dst_BPP, + unsigned long dst_X, + unsigned long dst_Y, + unsigned long dst_width, + unsigned long dst_height, + unsigned long src_base, + unsigned long src_pitch, + unsigned long src_X, + unsigned long src_Y, pTransparent pTransp, unsigned char nROP2) +{ + unsigned long nDirection = 0; + unsigned long nTransparent = 0; + /* Direction of ROP2 operation: + * 1 = Left to Right, + * (-1) = Right to Left + */ + unsigned long opSign = 1; + /* xWidth is in pixels */ + unsigned long xWidth = 192 / (dst_BPP / 8); + unsigned long de_ctrl = 0; + + deWaitForNotBusy(); + + SMTC_write2Dreg(DE_WINDOW_DESTINATION_BASE, + FIELD_VALUE(0, DE_WINDOW_DESTINATION_BASE, ADDRESS, + dst_base)); + + SMTC_write2Dreg(DE_WINDOW_SOURCE_BASE, + FIELD_VALUE(0, DE_WINDOW_SOURCE_BASE, ADDRESS, + src_base)); + + if (dst_pitch && src_pitch) { + SMTC_write2Dreg(DE_PITCH, + FIELD_VALUE(0, DE_PITCH, DESTINATION, + dst_pitch) | FIELD_VALUE(0, + DE_PITCH, + SOURCE, + src_pitch)); + + SMTC_write2Dreg(DE_WINDOW_WIDTH, + FIELD_VALUE(0, DE_WINDOW_WIDTH, DESTINATION, + dst_pitch) | FIELD_VALUE(0, + DE_WINDOW_WIDTH, + SOURCE, + src_pitch)); + } + + /* Set transparent bits if necessary */ + if (pTransp != NULL) { + nTransparent = + pTransp->match | pTransp->select | pTransp->control; + + /* Set color compare register */ + SMTC_write2Dreg(DE_COLOR_COMPARE, + FIELD_VALUE(0, DE_COLOR_COMPARE, COLOR, + pTransp->color)); + } + + /* Determine direction of operation */ + if (src_Y < dst_Y) { + /* +----------+ + |S | + | +----------+ + | | | | + | | | | + +---|------+ | + | D | + +----------+ */ + + nDirection = BOTTOM_TO_TOP; + } else if (src_Y > dst_Y) { + /* +----------+ + |D | + | +----------+ + | | | | + | | | | + +---|------+ | + | S | + +----------+ */ + + nDirection = TOP_TO_BOTTOM; + } else { + /* src_Y == dst_Y */ + + if (src_X <= dst_X) { + /* +------+---+------+ + |S | | D| + | | | | + | | | | + | | | | + +------+---+------+ */ + + nDirection = RIGHT_TO_LEFT; + } else { + /* src_X > dst_X */ + + /* +------+---+------+ + |D | | S| + | | | | + | | | | + | | | | + +------+---+------+ */ + + nDirection = LEFT_TO_RIGHT; + } + } + + if ((nDirection == BOTTOM_TO_TOP) || (nDirection == RIGHT_TO_LEFT)) { + src_X += dst_width - 1; + src_Y += dst_height - 1; + dst_X += dst_width - 1; + dst_Y += dst_height - 1; + opSign = (-1); + } + + if (dst_BPP >= 24) { + src_X *= 3; + src_Y *= 3; + dst_X *= 3; + dst_Y *= 3; + dst_width *= 3; + if ((nDirection == BOTTOM_TO_TOP) + || (nDirection == RIGHT_TO_LEFT)) { + src_X += 2; + dst_X += 2; + } + } + + /* Workaround for 192 byte hw bug */ + if ((nROP2 != 0x0C) && ((dst_width * (dst_BPP / 8)) >= 192)) { + /* + * Perform the ROP2 operation in chunks of (xWidth * + * dst_height) + */ + while (1) { + deWaitForNotBusy(); + + SMTC_write2Dreg(DE_SOURCE, + FIELD_SET(0, DE_SOURCE, WRAP, DISABLE) | + FIELD_VALUE(0, DE_SOURCE, X_K1, src_X) | + FIELD_VALUE(0, DE_SOURCE, Y_K2, src_Y)); + + SMTC_write2Dreg(DE_DESTINATION, + FIELD_SET(0, DE_DESTINATION, WRAP, + DISABLE) | FIELD_VALUE(0, + DE_DESTINATION, + X, + dst_X) + | FIELD_VALUE(0, DE_DESTINATION, Y, + dst_Y)); + + SMTC_write2Dreg(DE_DIMENSION, + FIELD_VALUE(0, DE_DIMENSION, X, + xWidth) | FIELD_VALUE(0, + DE_DIMENSION, + Y_ET, + dst_height)); + + de_ctrl = + FIELD_VALUE(0, DE_CONTROL, ROP, + nROP2) | nTransparent | FIELD_SET(0, + DE_CONTROL, + ROP_SELECT, + ROP2) + | FIELD_SET(0, DE_CONTROL, COMMAND, + BITBLT) | ((nDirection == + 1) ? FIELD_SET(0, + DE_CONTROL, + DIRECTION, + RIGHT_TO_LEFT) + : FIELD_SET(0, DE_CONTROL, + DIRECTION, + LEFT_TO_RIGHT)) | + FIELD_SET(0, DE_CONTROL, STATUS, START); + + SMTC_write2Dreg(DE_CONTROL, de_ctrl); + + src_X += (opSign * xWidth); + dst_X += (opSign * xWidth); + dst_width -= xWidth; + + if (dst_width <= 0) { + /* ROP2 operation is complete */ + break; + } + + if (xWidth > dst_width) + xWidth = dst_width; + } + } else { + deWaitForNotBusy(); + SMTC_write2Dreg(DE_SOURCE, + FIELD_SET(0, DE_SOURCE, WRAP, DISABLE) | + FIELD_VALUE(0, DE_SOURCE, X_K1, src_X) | + FIELD_VALUE(0, DE_SOURCE, Y_K2, src_Y)); + + SMTC_write2Dreg(DE_DESTINATION, + FIELD_SET(0, DE_DESTINATION, WRAP, DISABLE) | + FIELD_VALUE(0, DE_DESTINATION, X, dst_X) | + FIELD_VALUE(0, DE_DESTINATION, Y, dst_Y)); + + SMTC_write2Dreg(DE_DIMENSION, + FIELD_VALUE(0, DE_DIMENSION, X, dst_width) | + FIELD_VALUE(0, DE_DIMENSION, Y_ET, dst_height)); + + de_ctrl = FIELD_VALUE(0, DE_CONTROL, ROP, nROP2) | + nTransparent | + FIELD_SET(0, DE_CONTROL, ROP_SELECT, ROP2) | + FIELD_SET(0, DE_CONTROL, COMMAND, BITBLT) | + ((nDirection == 1) ? FIELD_SET(0, DE_CONTROL, DIRECTION, + RIGHT_TO_LEFT) + : FIELD_SET(0, DE_CONTROL, DIRECTION, + LEFT_TO_RIGHT)) | FIELD_SET(0, DE_CONTROL, + STATUS, START); + SMTC_write2Dreg(DE_CONTROL, de_ctrl); + } + + smtc_de_busy = 1; +} + +/* + * This function sets the pixel format that will apply to the 2D Engine. + */ +void deSetPixelFormat(unsigned long bpp) +{ + unsigned long de_format; + + de_format = SMTC_read2Dreg(DE_STRETCH_FORMAT); + + switch (bpp) { + case 8: + de_format = + FIELD_SET(de_format, DE_STRETCH_FORMAT, PIXEL_FORMAT, 8); + break; + default: + case 16: + de_format = + FIELD_SET(de_format, DE_STRETCH_FORMAT, PIXEL_FORMAT, 16); + break; + case 32: + de_format = + FIELD_SET(de_format, DE_STRETCH_FORMAT, PIXEL_FORMAT, 32); + break; + } + + SMTC_write2Dreg(DE_STRETCH_FORMAT, de_format); +} + +/* + * System memory to Video memory monochrome expansion. + * + * Source is monochrome image in system memory. This function expands the + * monochrome data to color image in video memory. + */ + +long deSystemMem2VideoMemMonoBlt(const char *pSrcbuf, + long srcDelta, + unsigned long startBit, + unsigned long dBase, + unsigned long dPitch, + unsigned long bpp, + unsigned long dx, unsigned long dy, + unsigned long width, unsigned long height, + unsigned long fColor, + unsigned long bColor, + unsigned long rop2) { + unsigned long bytePerPixel; + unsigned long ulBytesPerScan; + unsigned long ul4BytesPerScan; + unsigned long ulBytesRemain; + unsigned long de_ctrl = 0; + unsigned char ajRemain[4]; + long i, j; + + bytePerPixel = bpp / 8; + + /* Just make sure the start bit is within legal range */ + startBit &= 7; + + ulBytesPerScan = (width + startBit + 7) / 8; + ul4BytesPerScan = ulBytesPerScan & ~3; + ulBytesRemain = ulBytesPerScan & 3; + + if (smtc_de_busy) + deWaitForNotBusy(); + + /* + * 2D Source Base. Use 0 for HOST Blt. + */ + + SMTC_write2Dreg(DE_WINDOW_SOURCE_BASE, 0); + + /* + * 2D Destination Base. + * + * It is an address offset (128 bit aligned) from the beginning of + * frame buffer. + */ + + SMTC_write2Dreg(DE_WINDOW_DESTINATION_BASE, dBase); + + if (dPitch) { + + /* + * Program pitch (distance between the 1st points of two + * adjacent lines). + * + * Note that input pitch is BYTE value, but the 2D Pitch + * register uses pixel values. Need Byte to pixel convertion. + */ + + SMTC_write2Dreg(DE_PITCH, + FIELD_VALUE(0, DE_PITCH, DESTINATION, + dPitch / + bytePerPixel) | FIELD_VALUE(0, + DE_PITCH, + SOURCE, + dPitch / + bytePerPixel)); + + /* Screen Window width in Pixels. + * + * 2D engine uses this value to calculate the linear address in + * frame buffer for a given point. + */ + + SMTC_write2Dreg(DE_WINDOW_WIDTH, + FIELD_VALUE(0, DE_WINDOW_WIDTH, DESTINATION, + (dPitch / + bytePerPixel)) | FIELD_VALUE(0, + DE_WINDOW_WIDTH, + SOURCE, + (dPitch + / + bytePerPixel))); + } + /* Note: For 2D Source in Host Write, only X_K1 field is needed, and + * Y_K2 field is not used. For mono bitmap, use startBit for X_K1. + */ + + SMTC_write2Dreg(DE_SOURCE, + FIELD_SET(0, DE_SOURCE, WRAP, DISABLE) | + FIELD_VALUE(0, DE_SOURCE, X_K1, startBit) | + FIELD_VALUE(0, DE_SOURCE, Y_K2, 0)); + + SMTC_write2Dreg(DE_DESTINATION, + FIELD_SET(0, DE_DESTINATION, WRAP, DISABLE) | + FIELD_VALUE(0, DE_DESTINATION, X, dx) | + FIELD_VALUE(0, DE_DESTINATION, Y, dy)); + + SMTC_write2Dreg(DE_DIMENSION, + FIELD_VALUE(0, DE_DIMENSION, X, width) | + FIELD_VALUE(0, DE_DIMENSION, Y_ET, height)); + + SMTC_write2Dreg(DE_FOREGROUND, fColor); + SMTC_write2Dreg(DE_BACKGROUND, bColor); + + if (bpp) + deSetPixelFormat(bpp); + /* Set the pixel format of the destination */ + + de_ctrl = FIELD_VALUE(0, DE_CONTROL, ROP, rop2) | + FIELD_SET(0, DE_CONTROL, ROP_SELECT, ROP2) | + FIELD_SET(0, DE_CONTROL, COMMAND, HOST_WRITE) | + FIELD_SET(0, DE_CONTROL, HOST, MONO) | + FIELD_SET(0, DE_CONTROL, STATUS, START); + + SMTC_write2Dreg(DE_CONTROL, de_ctrl | deGetTransparency()); + + /* Write MONO data (line by line) to 2D Engine data port */ + for (i = 0; i < height; i++) { + /* For each line, send the data in chunks of 4 bytes */ + for (j = 0; j < (ul4BytesPerScan / 4); j++) + SMTC_write2Ddataport(0, + *(unsigned long *)(pSrcbuf + + (j * 4))); + + if (ulBytesRemain) { + memcpy(ajRemain, pSrcbuf + ul4BytesPerScan, + ulBytesRemain); + SMTC_write2Ddataport(0, *(unsigned long *)ajRemain); + } + + pSrcbuf += srcDelta; + } + smtc_de_busy = 1; + + return 0; +} + +/* + * This function gets the transparency status from DE_CONTROL register. + * It returns a double word with the transparent fields properly set, + * while other fields are 0. + */ +unsigned long deGetTransparency(void) +{ + unsigned long de_ctrl; + + de_ctrl = SMTC_read2Dreg(DE_CONTROL); + + de_ctrl &= + FIELD_MASK(DE_CONTROL_TRANSPARENCY_MATCH) | + FIELD_MASK(DE_CONTROL_TRANSPARENCY_SELECT) | + FIELD_MASK(DE_CONTROL_TRANSPARENCY); + + return de_ctrl; +} diff --git a/drivers/staging/sm7xx/smtc2d.h b/drivers/staging/sm7xx/smtc2d.h new file mode 100644 index 000000000000..38d0c335322b --- /dev/null +++ b/drivers/staging/sm7xx/smtc2d.h @@ -0,0 +1,530 @@ +/* + * Silicon Motion SM712 2D drawing engine functions. + * + * Copyright (C) 2006 Silicon Motion Technology Corp. + * Author: Ge Wang, gewang@siliconmotion.com + * + * Copyright (C) 2009 Lemote, Inc. + * Author: Wu Zhangjin, wuzj@lemote.com + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive for + * more details. + */ + +#ifndef NULL +#define NULL 0 +#endif + +/* Internal macros */ + +#define _F_START(f) (0 ? f) +#define _F_END(f) (1 ? f) +#define _F_SIZE(f) (1 + _F_END(f) - _F_START(f)) +#define _F_MASK(f) (((1ULL << _F_SIZE(f)) - 1) << _F_START(f)) +#define _F_NORMALIZE(v, f) (((v) & _F_MASK(f)) >> _F_START(f)) +#define _F_DENORMALIZE(v, f) (((v) << _F_START(f)) & _F_MASK(f)) + +/* Global macros */ + +#define FIELD_GET(x, reg, field) \ +( \ + _F_NORMALIZE((x), reg ## _ ## field) \ +) + +#define FIELD_SET(x, reg, field, value) \ +( \ + (x & ~_F_MASK(reg ## _ ## field)) \ + | _F_DENORMALIZE(reg ## _ ## field ## _ ## value, reg ## _ ## field) \ +) + +#define FIELD_VALUE(x, reg, field, value) \ +( \ + (x & ~_F_MASK(reg ## _ ## field)) \ + | _F_DENORMALIZE(value, reg ## _ ## field) \ +) + +#define FIELD_CLEAR(reg, field) \ +( \ + ~_F_MASK(reg ## _ ## field) \ +) + +/* Field Macros */ + +#define FIELD_START(field) (0 ? field) +#define FIELD_END(field) (1 ? field) +#define FIELD_SIZE(field) \ + (1 + FIELD_END(field) - FIELD_START(field)) + +#define FIELD_MASK(field) \ + (((1 << (FIELD_SIZE(field)-1)) \ + | ((1 << (FIELD_SIZE(field)-1)) - 1)) \ + << FIELD_START(field)) + +#define FIELD_NORMALIZE(reg, field) \ + (((reg) & FIELD_MASK(field)) >> FIELD_START(field)) + +#define FIELD_DENORMALIZE(field, value) \ + (((value) << FIELD_START(field)) & FIELD_MASK(field)) + +#define FIELD_INIT(reg, field, value) \ + FIELD_DENORMALIZE(reg ## _ ## field, \ + reg ## _ ## field ## _ ## value) + +#define FIELD_INIT_VAL(reg, field, value) \ + (FIELD_DENORMALIZE(reg ## _ ## field, value)) + +#define FIELD_VAL_SET(x, r, f, v) ({ \ + x = (x & ~FIELD_MASK(r ## _ ## f)) \ + | FIELD_DENORMALIZE(r ## _ ## f, r ## _ ## f ## _ ## v) \ +}) + +#define RGB(r, g, b) ((unsigned long)(((r) << 16) | ((g) << 8) | (b))) + +/* Transparent info definition */ +typedef struct { + unsigned long match; /* Matching pixel is OPAQUE/TRANSPARENT */ + unsigned long select; /* Transparency controlled by SRC/DST */ + unsigned long control; /* ENABLE/DISABLE transparency */ + unsigned long color; /* Transparent color */ +} Transparent, *pTransparent; + +#define PIXEL_DEPTH_1_BP 0 /* 1 bit per pixel */ +#define PIXEL_DEPTH_8_BPP 1 /* 8 bits per pixel */ +#define PIXEL_DEPTH_16_BPP 2 /* 16 bits per pixel */ +#define PIXEL_DEPTH_32_BPP 3 /* 32 bits per pixel */ +#define PIXEL_DEPTH_YUV422 8 /* 16 bits per pixel YUV422 */ +#define PIXEL_DEPTH_YUV420 9 /* 16 bits per pixel YUV420 */ + +#define PATTERN_WIDTH 8 +#define PATTERN_HEIGHT 8 + +#define TOP_TO_BOTTOM 0 +#define BOTTOM_TO_TOP 1 +#define RIGHT_TO_LEFT BOTTOM_TO_TOP +#define LEFT_TO_RIGHT TOP_TO_BOTTOM + +/* Constants used in Transparent structure */ +#define MATCH_OPAQUE 0x00000000 +#define MATCH_TRANSPARENT 0x00000400 +#define SOURCE 0x00000000 +#define DESTINATION 0x00000200 + +/* 2D registers. */ + +#define DE_SOURCE 0x000000 +#define DE_SOURCE_WRAP 31 : 31 +#define DE_SOURCE_WRAP_DISABLE 0 +#define DE_SOURCE_WRAP_ENABLE 1 +#define DE_SOURCE_X_K1 29 : 16 +#define DE_SOURCE_Y_K2 15 : 0 + +#define DE_DESTINATION 0x000004 +#define DE_DESTINATION_WRAP 31 : 31 +#define DE_DESTINATION_WRAP_DISABLE 0 +#define DE_DESTINATION_WRAP_ENABLE 1 +#define DE_DESTINATION_X 28 : 16 +#define DE_DESTINATION_Y 15 : 0 + +#define DE_DIMENSION 0x000008 +#define DE_DIMENSION_X 28 : 16 +#define DE_DIMENSION_Y_ET 15 : 0 + +#define DE_CONTROL 0x00000C +#define DE_CONTROL_STATUS 31 : 31 +#define DE_CONTROL_STATUS_STOP 0 +#define DE_CONTROL_STATUS_START 1 +#define DE_CONTROL_PATTERN 30 : 30 +#define DE_CONTROL_PATTERN_MONO 0 +#define DE_CONTROL_PATTERN_COLOR 1 +#define DE_CONTROL_UPDATE_DESTINATION_X 29 : 29 +#define DE_CONTROL_UPDATE_DESTINATION_X_DISABLE 0 +#define DE_CONTROL_UPDATE_DESTINATION_X_ENABLE 1 +#define DE_CONTROL_QUICK_START 28 : 28 +#define DE_CONTROL_QUICK_START_DISABLE 0 +#define DE_CONTROL_QUICK_START_ENABLE 1 +#define DE_CONTROL_DIRECTION 27 : 27 +#define DE_CONTROL_DIRECTION_LEFT_TO_RIGHT 0 +#define DE_CONTROL_DIRECTION_RIGHT_TO_LEFT 1 +#define DE_CONTROL_MAJOR 26 : 26 +#define DE_CONTROL_MAJOR_X 0 +#define DE_CONTROL_MAJOR_Y 1 +#define DE_CONTROL_STEP_X 25 : 25 +#define DE_CONTROL_STEP_X_POSITIVE 1 +#define DE_CONTROL_STEP_X_NEGATIVE 0 +#define DE_CONTROL_STEP_Y 24 : 24 +#define DE_CONTROL_STEP_Y_POSITIVE 1 +#define DE_CONTROL_STEP_Y_NEGATIVE 0 +#define DE_CONTROL_STRETCH 23 : 23 +#define DE_CONTROL_STRETCH_DISABLE 0 +#define DE_CONTROL_STRETCH_ENABLE 1 +#define DE_CONTROL_HOST 22 : 22 +#define DE_CONTROL_HOST_COLOR 0 +#define DE_CONTROL_HOST_MONO 1 +#define DE_CONTROL_LAST_PIXEL 21 : 21 +#define DE_CONTROL_LAST_PIXEL_OFF 0 +#define DE_CONTROL_LAST_PIXEL_ON 1 +#define DE_CONTROL_COMMAND 20 : 16 +#define DE_CONTROL_COMMAND_BITBLT 0 +#define DE_CONTROL_COMMAND_RECTANGLE_FILL 1 +#define DE_CONTROL_COMMAND_DE_TILE 2 +#define DE_CONTROL_COMMAND_TRAPEZOID_FILL 3 +#define DE_CONTROL_COMMAND_ALPHA_BLEND 4 +#define DE_CONTROL_COMMAND_RLE_STRIP 5 +#define DE_CONTROL_COMMAND_SHORT_STROKE 6 +#define DE_CONTROL_COMMAND_LINE_DRAW 7 +#define DE_CONTROL_COMMAND_HOST_WRITE 8 +#define DE_CONTROL_COMMAND_HOST_READ 9 +#define DE_CONTROL_COMMAND_HOST_WRITE_BOTTOM_UP 10 +#define DE_CONTROL_COMMAND_ROTATE 11 +#define DE_CONTROL_COMMAND_FONT 12 +#define DE_CONTROL_COMMAND_TEXTURE_LOAD 15 +#define DE_CONTROL_ROP_SELECT 15 : 15 +#define DE_CONTROL_ROP_SELECT_ROP3 0 +#define DE_CONTROL_ROP_SELECT_ROP2 1 +#define DE_CONTROL_ROP2_SOURCE 14 : 14 +#define DE_CONTROL_ROP2_SOURCE_BITMAP 0 +#define DE_CONTROL_ROP2_SOURCE_PATTERN 1 +#define DE_CONTROL_MONO_DATA 13 : 12 +#define DE_CONTROL_MONO_DATA_NOT_PACKED 0 +#define DE_CONTROL_MONO_DATA_8_PACKED 1 +#define DE_CONTROL_MONO_DATA_16_PACKED 2 +#define DE_CONTROL_MONO_DATA_32_PACKED 3 +#define DE_CONTROL_REPEAT_ROTATE 11 : 11 +#define DE_CONTROL_REPEAT_ROTATE_DISABLE 0 +#define DE_CONTROL_REPEAT_ROTATE_ENABLE 1 +#define DE_CONTROL_TRANSPARENCY_MATCH 10 : 10 +#define DE_CONTROL_TRANSPARENCY_MATCH_OPAQUE 0 +#define DE_CONTROL_TRANSPARENCY_MATCH_TRANSPARENT 1 +#define DE_CONTROL_TRANSPARENCY_SELECT 9 : 9 +#define DE_CONTROL_TRANSPARENCY_SELECT_SOURCE 0 +#define DE_CONTROL_TRANSPARENCY_SELECT_DESTINATION 1 +#define DE_CONTROL_TRANSPARENCY 8 : 8 +#define DE_CONTROL_TRANSPARENCY_DISABLE 0 +#define DE_CONTROL_TRANSPARENCY_ENABLE 1 +#define DE_CONTROL_ROP 7 : 0 + +/* Pseudo fields. */ + +#define DE_CONTROL_SHORT_STROKE_DIR 27 : 24 +#define DE_CONTROL_SHORT_STROKE_DIR_225 0 +#define DE_CONTROL_SHORT_STROKE_DIR_135 1 +#define DE_CONTROL_SHORT_STROKE_DIR_315 2 +#define DE_CONTROL_SHORT_STROKE_DIR_45 3 +#define DE_CONTROL_SHORT_STROKE_DIR_270 4 +#define DE_CONTROL_SHORT_STROKE_DIR_90 5 +#define DE_CONTROL_SHORT_STROKE_DIR_180 8 +#define DE_CONTROL_SHORT_STROKE_DIR_0 10 +#define DE_CONTROL_ROTATION 25 : 24 +#define DE_CONTROL_ROTATION_0 0 +#define DE_CONTROL_ROTATION_270 1 +#define DE_CONTROL_ROTATION_90 2 +#define DE_CONTROL_ROTATION_180 3 + +#define DE_PITCH 0x000010 +#define DE_PITCH_DESTINATION 28 : 16 +#define DE_PITCH_SOURCE 12 : 0 + +#define DE_FOREGROUND 0x000014 +#define DE_FOREGROUND_COLOR 31 : 0 + +#define DE_BACKGROUND 0x000018 +#define DE_BACKGROUND_COLOR 31 : 0 + +#define DE_STRETCH_FORMAT 0x00001C +#define DE_STRETCH_FORMAT_PATTERN_XY 30 : 30 +#define DE_STRETCH_FORMAT_PATTERN_XY_NORMAL 0 +#define DE_STRETCH_FORMAT_PATTERN_XY_OVERWRITE 1 +#define DE_STRETCH_FORMAT_PATTERN_Y 29 : 27 +#define DE_STRETCH_FORMAT_PATTERN_X 25 : 23 +#define DE_STRETCH_FORMAT_PIXEL_FORMAT 21 : 20 +#define DE_STRETCH_FORMAT_PIXEL_FORMAT_8 0 +#define DE_STRETCH_FORMAT_PIXEL_FORMAT_16 1 +#define DE_STRETCH_FORMAT_PIXEL_FORMAT_24 3 +#define DE_STRETCH_FORMAT_PIXEL_FORMAT_32 2 +#define DE_STRETCH_FORMAT_ADDRESSING 19 : 16 +#define DE_STRETCH_FORMAT_ADDRESSING_XY 0 +#define DE_STRETCH_FORMAT_ADDRESSING_LINEAR 15 +#define DE_STRETCH_FORMAT_SOURCE_HEIGHT 11 : 0 + +#define DE_COLOR_COMPARE 0x000020 +#define DE_COLOR_COMPARE_COLOR 23 : 0 + +#define DE_COLOR_COMPARE_MASK 0x000024 +#define DE_COLOR_COMPARE_MASK_MASKS 23 : 0 + +#define DE_MASKS 0x000028 +#define DE_MASKS_BYTE_MASK 31 : 16 +#define DE_MASKS_BIT_MASK 15 : 0 + +#define DE_CLIP_TL 0x00002C +#define DE_CLIP_TL_TOP 31 : 16 +#define DE_CLIP_TL_STATUS 13 : 13 +#define DE_CLIP_TL_STATUS_DISABLE 0 +#define DE_CLIP_TL_STATUS_ENABLE 1 +#define DE_CLIP_TL_INHIBIT 12 : 12 +#define DE_CLIP_TL_INHIBIT_OUTSIDE 0 +#define DE_CLIP_TL_INHIBIT_INSIDE 1 +#define DE_CLIP_TL_LEFT 11 : 0 + +#define DE_CLIP_BR 0x000030 +#define DE_CLIP_BR_BOTTOM 31 : 16 +#define DE_CLIP_BR_RIGHT 12 : 0 + +#define DE_MONO_PATTERN_LOW 0x000034 +#define DE_MONO_PATTERN_LOW_PATTERN 31 : 0 + +#define DE_MONO_PATTERN_HIGH 0x000038 +#define DE_MONO_PATTERN_HIGH_PATTERN 31 : 0 + +#define DE_WINDOW_WIDTH 0x00003C +#define DE_WINDOW_WIDTH_DESTINATION 28 : 16 +#define DE_WINDOW_WIDTH_SOURCE 12 : 0 + +#define DE_WINDOW_SOURCE_BASE 0x000040 +#define DE_WINDOW_SOURCE_BASE_EXT 27 : 27 +#define DE_WINDOW_SOURCE_BASE_EXT_LOCAL 0 +#define DE_WINDOW_SOURCE_BASE_EXT_EXTERNAL 1 +#define DE_WINDOW_SOURCE_BASE_CS 26 : 26 +#define DE_WINDOW_SOURCE_BASE_CS_0 0 +#define DE_WINDOW_SOURCE_BASE_CS_1 1 +#define DE_WINDOW_SOURCE_BASE_ADDRESS 25 : 0 + +#define DE_WINDOW_DESTINATION_BASE 0x000044 +#define DE_WINDOW_DESTINATION_BASE_EXT 27 : 27 +#define DE_WINDOW_DESTINATION_BASE_EXT_LOCAL 0 +#define DE_WINDOW_DESTINATION_BASE_EXT_EXTERNAL 1 +#define DE_WINDOW_DESTINATION_BASE_CS 26 : 26 +#define DE_WINDOW_DESTINATION_BASE_CS_0 0 +#define DE_WINDOW_DESTINATION_BASE_CS_1 1 +#define DE_WINDOW_DESTINATION_BASE_ADDRESS 25 : 0 + +#define DE_ALPHA 0x000048 +#define DE_ALPHA_VALUE 7 : 0 + +#define DE_WRAP 0x00004C +#define DE_WRAP_X 31 : 16 +#define DE_WRAP_Y 15 : 0 + +#define DE_STATUS 0x000050 +#define DE_STATUS_CSC 1 : 1 +#define DE_STATUS_CSC_CLEAR 0 +#define DE_STATUS_CSC_NOT_ACTIVE 0 +#define DE_STATUS_CSC_ACTIVE 1 +#define DE_STATUS_2D 0 : 0 +#define DE_STATUS_2D_CLEAR 0 +#define DE_STATUS_2D_NOT_ACTIVE 0 +#define DE_STATUS_2D_ACTIVE 1 + +/* Color Space Conversion registers. */ + +#define CSC_Y_SOURCE_BASE 0x0000C8 +#define CSC_Y_SOURCE_BASE_EXT 27 : 27 +#define CSC_Y_SOURCE_BASE_EXT_LOCAL 0 +#define CSC_Y_SOURCE_BASE_EXT_EXTERNAL 1 +#define CSC_Y_SOURCE_BASE_CS 26 : 26 +#define CSC_Y_SOURCE_BASE_CS_0 0 +#define CSC_Y_SOURCE_BASE_CS_1 1 +#define CSC_Y_SOURCE_BASE_ADDRESS 25 : 0 + +#define CSC_CONSTANTS 0x0000CC +#define CSC_CONSTANTS_Y 31 : 24 +#define CSC_CONSTANTS_R 23 : 16 +#define CSC_CONSTANTS_G 15 : 8 +#define CSC_CONSTANTS_B 7 : 0 + +#define CSC_Y_SOURCE_X 0x0000D0 +#define CSC_Y_SOURCE_X_INTEGER 26 : 16 +#define CSC_Y_SOURCE_X_FRACTION 15 : 3 + +#define CSC_Y_SOURCE_Y 0x0000D4 +#define CSC_Y_SOURCE_Y_INTEGER 27 : 16 +#define CSC_Y_SOURCE_Y_FRACTION 15 : 3 + +#define CSC_U_SOURCE_BASE 0x0000D8 +#define CSC_U_SOURCE_BASE_EXT 27 : 27 +#define CSC_U_SOURCE_BASE_EXT_LOCAL 0 +#define CSC_U_SOURCE_BASE_EXT_EXTERNAL 1 +#define CSC_U_SOURCE_BASE_CS 26 : 26 +#define CSC_U_SOURCE_BASE_CS_0 0 +#define CSC_U_SOURCE_BASE_CS_1 1 +#define CSC_U_SOURCE_BASE_ADDRESS 25 : 0 + +#define CSC_V_SOURCE_BASE 0x0000DC +#define CSC_V_SOURCE_BASE_EXT 27 : 27 +#define CSC_V_SOURCE_BASE_EXT_LOCAL 0 +#define CSC_V_SOURCE_BASE_EXT_EXTERNAL 1 +#define CSC_V_SOURCE_BASE_CS 26 : 26 +#define CSC_V_SOURCE_BASE_CS_0 0 +#define CSC_V_SOURCE_BASE_CS_1 1 +#define CSC_V_SOURCE_BASE_ADDRESS 25 : 0 + +#define CSC_SOURCE_DIMENSION 0x0000E0 +#define CSC_SOURCE_DIMENSION_X 31 : 16 +#define CSC_SOURCE_DIMENSION_Y 15 : 0 + +#define CSC_SOURCE_PITCH 0x0000E4 +#define CSC_SOURCE_PITCH_Y 31 : 16 +#define CSC_SOURCE_PITCH_UV 15 : 0 + +#define CSC_DESTINATION 0x0000E8 +#define CSC_DESTINATION_WRAP 31 : 31 +#define CSC_DESTINATION_WRAP_DISABLE 0 +#define CSC_DESTINATION_WRAP_ENABLE 1 +#define CSC_DESTINATION_X 27 : 16 +#define CSC_DESTINATION_Y 11 : 0 + +#define CSC_DESTINATION_DIMENSION 0x0000EC +#define CSC_DESTINATION_DIMENSION_X 31 : 16 +#define CSC_DESTINATION_DIMENSION_Y 15 : 0 + +#define CSC_DESTINATION_PITCH 0x0000F0 +#define CSC_DESTINATION_PITCH_X 31 : 16 +#define CSC_DESTINATION_PITCH_Y 15 : 0 + +#define CSC_SCALE_FACTOR 0x0000F4 +#define CSC_SCALE_FACTOR_HORIZONTAL 31 : 16 +#define CSC_SCALE_FACTOR_VERTICAL 15 : 0 + +#define CSC_DESTINATION_BASE 0x0000F8 +#define CSC_DESTINATION_BASE_EXT 27 : 27 +#define CSC_DESTINATION_BASE_EXT_LOCAL 0 +#define CSC_DESTINATION_BASE_EXT_EXTERNAL 1 +#define CSC_DESTINATION_BASE_CS 26 : 26 +#define CSC_DESTINATION_BASE_CS_0 0 +#define CSC_DESTINATION_BASE_CS_1 1 +#define CSC_DESTINATION_BASE_ADDRESS 25 : 0 + +#define CSC_CONTROL 0x0000FC +#define CSC_CONTROL_STATUS 31 : 31 +#define CSC_CONTROL_STATUS_STOP 0 +#define CSC_CONTROL_STATUS_START 1 +#define CSC_CONTROL_SOURCE_FORMAT 30 : 28 +#define CSC_CONTROL_SOURCE_FORMAT_YUV422 0 +#define CSC_CONTROL_SOURCE_FORMAT_YUV420I 1 +#define CSC_CONTROL_SOURCE_FORMAT_YUV420 2 +#define CSC_CONTROL_SOURCE_FORMAT_YVU9 3 +#define CSC_CONTROL_SOURCE_FORMAT_IYU1 4 +#define CSC_CONTROL_SOURCE_FORMAT_IYU2 5 +#define CSC_CONTROL_SOURCE_FORMAT_RGB565 6 +#define CSC_CONTROL_SOURCE_FORMAT_RGB8888 7 +#define CSC_CONTROL_DESTINATION_FORMAT 27 : 26 +#define CSC_CONTROL_DESTINATION_FORMAT_RGB565 0 +#define CSC_CONTROL_DESTINATION_FORMAT_RGB8888 1 +#define CSC_CONTROL_HORIZONTAL_FILTER 25 : 25 +#define CSC_CONTROL_HORIZONTAL_FILTER_DISABLE 0 +#define CSC_CONTROL_HORIZONTAL_FILTER_ENABLE 1 +#define CSC_CONTROL_VERTICAL_FILTER 24 : 24 +#define CSC_CONTROL_VERTICAL_FILTER_DISABLE 0 +#define CSC_CONTROL_VERTICAL_FILTER_ENABLE 1 +#define CSC_CONTROL_BYTE_ORDER 23 : 23 +#define CSC_CONTROL_BYTE_ORDER_YUYV 0 +#define CSC_CONTROL_BYTE_ORDER_UYVY 1 + +#define DE_DATA_PORT_501 0x110000 +#define DE_DATA_PORT_712 0x400000 +#define DE_DATA_PORT_722 0x6000 + +/* point to virtual Memory Map IO starting address */ +extern char *smtc_RegBaseAddress; +/* point to virtual video memory starting address */ +extern char *smtc_VRAMBaseAddress; +extern unsigned char smtc_de_busy; + +extern unsigned long memRead32(unsigned long nOffset); +extern void memWrite32(unsigned long nOffset, unsigned long nData); +extern unsigned long SMTC_read2Dreg(unsigned long nOffset); + +/* 2D functions */ +extern void deInit(unsigned int nModeWidth, unsigned int nModeHeight, + unsigned int bpp); + +extern void deWaitForNotBusy(void); + +extern void deVerticalLine(unsigned long dst_base, + unsigned long dst_pitch, + unsigned long nX, + unsigned long nY, + unsigned long dst_height, + unsigned long nColor); + +extern void deHorizontalLine(unsigned long dst_base, + unsigned long dst_pitch, + unsigned long nX, + unsigned long nY, + unsigned long dst_width, + unsigned long nColor); + +extern void deLine(unsigned long dst_base, + unsigned long dst_pitch, + unsigned long nX1, + unsigned long nY1, + unsigned long nX2, + unsigned long nY2, + unsigned long nColor); + +extern void deFillRect(unsigned long dst_base, + unsigned long dst_pitch, + unsigned long dst_X, + unsigned long dst_Y, + unsigned long dst_width, + unsigned long dst_height, + unsigned long nColor); + +extern void deRotatePattern(unsigned char *pattern_dstaddr, + unsigned long pattern_src_addr, + unsigned long pattern_BPP, + unsigned long pattern_stride, + int patternX, + int patternY); + +extern void deCopy(unsigned long dst_base, + unsigned long dst_pitch, + unsigned long dst_BPP, + unsigned long dst_X, + unsigned long dst_Y, + unsigned long dst_width, + unsigned long dst_height, + unsigned long src_base, + unsigned long src_pitch, + unsigned long src_X, + unsigned long src_Y, + pTransparent pTransp, + unsigned char nROP2); + +/* + * System memory to Video memory monochrome expansion. + * + * Source is monochrome image in system memory. This function expands the + * monochrome data to color image in video memory. + * + * @pSrcbuf: pointer to start of source buffer in system memory + * @srcDelta: Pitch value (in bytes) of the source buffer, +ive means top + * down and -ive mean button up + * @startBit: Mono data can start at any bit in a byte, this value should + * be 0 to 7 + * @dBase: Address of destination : offset in frame buffer + * @dPitch: Pitch value of destination surface in BYTE + * @bpp: Color depth of destination surface + * @dx, dy: Starting coordinate of destination surface + * @width, height: width and height of rectange in pixel value + * @fColor,bColor: Foreground, Background color (corresponding to a 1, 0 in + * the monochrome data) + * @rop2: ROP value + */ + +extern long deSystemMem2VideoMemMonoBlt( + const char *pSrcbuf, + long srcDelta, + unsigned long startBit, + unsigned long dBase, + unsigned long dPitch, + unsigned long bpp, + unsigned long dx, unsigned long dy, + unsigned long width, unsigned long height, + unsigned long fColor, + unsigned long bColor, + unsigned long rop2); + +extern unsigned long deGetTransparency(void); +extern void deSetPixelFormat(unsigned long bpp); diff --git a/drivers/staging/sm7xx/smtcfb.c b/drivers/staging/sm7xx/smtcfb.c new file mode 100644 index 000000000000..161dbc9c1397 --- /dev/null +++ b/drivers/staging/sm7xx/smtcfb.c @@ -0,0 +1,1253 @@ +/* + * Silicon Motion SM7XX frame buffer device + * + * Copyright (C) 2006 Silicon Motion Technology Corp. + * Authors: Ge Wang, gewang@siliconmotion.com + * Boyod boyod.yang@siliconmotion.com.cn + * + * Copyright (C) 2009 Lemote, Inc. + * Author: Wu Zhangjin, wuzj@lemote.com + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive for + * more details. + * + * Version 0.10.26192.21.01 + * - Add PowerPC/Big endian support + * - Add 2D support for Lynx + * - Verified on2.6.19.2 Boyod.yang <boyod.yang@siliconmotion.com.cn> + * + * Version 0.09.2621.00.01 + * - Only support Linux Kernel's version 2.6.21. + * Boyod.yang <boyod.yang@siliconmotion.com.cn> + * + * Version 0.09 + * - Only support Linux Kernel's version 2.6.12. + * Boyod.yang <boyod.yang@siliconmotion.com.cn> + */ + +#ifndef __KERNEL__ +#define __KERNEL__ +#endif + +#include <linux/io.h> +#include <linux/fb.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/uaccess.h> +#include <linux/console.h> +#include <linux/screen_info.h> + +#ifdef CONFIG_PM +#include <linux/pm.h> +#endif + +struct screen_info smtc_screen_info; + +#include "smtcfb.h" +#include "smtc2d.h" + +#ifdef DEBUG +#define smdbg(format, arg...) printk(KERN_DEBUG format , ## arg) +#else +#define smdbg(format, arg...) +#endif + +/* +* Private structure +*/ +struct smtcfb_info { + /* + * The following is a pointer to be passed into the + * functions below. The modules outside the main + * voyager.c driver have no knowledge as to what + * is within this structure. + */ + struct fb_info fb; + struct display_switch *dispsw; + struct pci_dev *dev; + signed int currcon; + + struct { + u8 red, green, blue; + } palette[NR_RGB]; + + u_int palette_size; +}; + +struct par_info { + /* + * Hardware + */ + u16 chipID; + unsigned char __iomem *m_pMMIO; + char __iomem *m_pLFB; + char *m_pDPR; + char *m_pVPR; + char *m_pCPR; + + u_int width; + u_int height; + u_int hz; + u_long BaseAddressInVRAM; + u8 chipRevID; +}; + +struct vesa_mode_table { + char mode_index[6]; + u16 lfb_width; + u16 lfb_height; + u16 lfb_depth; +}; + +static struct vesa_mode_table vesa_mode[] = { + {"0x301", 640, 480, 8}, + {"0x303", 800, 600, 8}, + {"0x305", 1024, 768, 8}, + {"0x307", 1280, 1024, 8}, + + {"0x311", 640, 480, 16}, + {"0x314", 800, 600, 16}, + {"0x317", 1024, 768, 16}, + {"0x31A", 1280, 1024, 16}, + + {"0x312", 640, 480, 24}, + {"0x315", 800, 600, 24}, + {"0x318", 1024, 768, 24}, + {"0x31B", 1280, 1024, 24}, +}; + +char __iomem *smtc_RegBaseAddress; /* Memory Map IO starting address */ +char __iomem *smtc_VRAMBaseAddress; /* video memory starting address */ + +char *smtc_2DBaseAddress; /* 2D engine starting address */ +char *smtc_2Ddataport; /* 2D data port offset */ +short smtc_2Dacceleration; + +static u32 colreg[17]; +static struct par_info hw; /* hardware information */ + +u16 smtc_ChipIDs[] = { + 0x710, + 0x712, + 0x720 +}; + +#define numSMTCchipIDs (sizeof(smtc_ChipIDs) / sizeof(u16)) + +void deWaitForNotBusy(void) +{ + unsigned long i = 0x1000000; + while (i--) { + if ((smtc_seqr(0x16) & 0x18) == 0x10) + break; + } + smtc_de_busy = 0; +} + +static void sm712_set_timing(struct smtcfb_info *sfb, + struct par_info *ppar_info) +{ + int i = 0, j = 0; + u32 m_nScreenStride; + + smdbg("\nppar_info->width = %d ppar_info->height = %d" + "sfb->fb.var.bits_per_pixel = %d ppar_info->hz = %d\n", + ppar_info->width, ppar_info->height, + sfb->fb.var.bits_per_pixel, ppar_info->hz); + + for (j = 0; j < numVGAModes; j++) { + if (VGAMode[j].mmSizeX == ppar_info->width && + VGAMode[j].mmSizeY == ppar_info->height && + VGAMode[j].bpp == sfb->fb.var.bits_per_pixel && + VGAMode[j].hz == ppar_info->hz) { + + smdbg("\nVGAMode[j].mmSizeX = %d VGAMode[j].mmSizeY =" + "%d VGAMode[j].bpp = %d" + "VGAMode[j].hz=%d\n", + VGAMode[j].mmSizeX, VGAMode[j].mmSizeY, + VGAMode[j].bpp, VGAMode[j].hz); + + smdbg("VGAMode index=%d\n", j); + + smtc_mmiowb(0x0, 0x3c6); + + smtc_seqw(0, 0x1); + + smtc_mmiowb(VGAMode[j].Init_MISC, 0x3c2); + + /* init SEQ register SR00 - SR04 */ + for (i = 0; i < SIZE_SR00_SR04; i++) + smtc_seqw(i, VGAMode[j].Init_SR00_SR04[i]); + + /* init SEQ register SR10 - SR24 */ + for (i = 0; i < SIZE_SR10_SR24; i++) + smtc_seqw(i + 0x10, + VGAMode[j].Init_SR10_SR24[i]); + + /* init SEQ register SR30 - SR75 */ + for (i = 0; i < SIZE_SR30_SR75; i++) + if (((i + 0x30) != 0x62) \ + && ((i + 0x30) != 0x6a) \ + && ((i + 0x30) != 0x6b)) + smtc_seqw(i + 0x30, + VGAMode[j].Init_SR30_SR75[i]); + + /* init SEQ register SR80 - SR93 */ + for (i = 0; i < SIZE_SR80_SR93; i++) + smtc_seqw(i + 0x80, + VGAMode[j].Init_SR80_SR93[i]); + + /* init SEQ register SRA0 - SRAF */ + for (i = 0; i < SIZE_SRA0_SRAF; i++) + smtc_seqw(i + 0xa0, + VGAMode[j].Init_SRA0_SRAF[i]); + + /* init Graphic register GR00 - GR08 */ + for (i = 0; i < SIZE_GR00_GR08; i++) + smtc_grphw(i, VGAMode[j].Init_GR00_GR08[i]); + + /* init Attribute register AR00 - AR14 */ + for (i = 0; i < SIZE_AR00_AR14; i++) + smtc_attrw(i, VGAMode[j].Init_AR00_AR14[i]); + + /* init CRTC register CR00 - CR18 */ + for (i = 0; i < SIZE_CR00_CR18; i++) + smtc_crtcw(i, VGAMode[j].Init_CR00_CR18[i]); + + /* init CRTC register CR30 - CR4D */ + for (i = 0; i < SIZE_CR30_CR4D; i++) + smtc_crtcw(i + 0x30, + VGAMode[j].Init_CR30_CR4D[i]); + + /* init CRTC register CR90 - CRA7 */ + for (i = 0; i < SIZE_CR90_CRA7; i++) + smtc_crtcw(i + 0x90, + VGAMode[j].Init_CR90_CRA7[i]); + } + } + smtc_mmiowb(0x67, 0x3c2); + + /* set VPR registers */ + writel(0x0, ppar_info->m_pVPR + 0x0C); + writel(0x0, ppar_info->m_pVPR + 0x40); + + /* set data width */ + m_nScreenStride = + (ppar_info->width * sfb->fb.var.bits_per_pixel) / 64; + switch (sfb->fb.var.bits_per_pixel) { + case 8: + writel(0x0, ppar_info->m_pVPR + 0x0); + break; + case 16: + writel(0x00020000, ppar_info->m_pVPR + 0x0); + break; + case 24: + writel(0x00040000, ppar_info->m_pVPR + 0x0); + break; + case 32: + writel(0x00030000, ppar_info->m_pVPR + 0x0); + break; + } + writel((u32) (((m_nScreenStride + 2) << 16) | m_nScreenStride), + ppar_info->m_pVPR + 0x10); + +} + +static void sm712_setpalette(int regno, unsigned red, unsigned green, + unsigned blue, struct fb_info *info) +{ + struct par_info *cur_par = (struct par_info *)info->par; + + if (cur_par->BaseAddressInVRAM) + /* + * second display palette for dual head. Enable CRT RAM, 6-bit + * RAM + */ + smtc_seqw(0x66, (smtc_seqr(0x66) & 0xC3) | 0x20); + else + /* primary display palette. Enable LCD RAM only, 6-bit RAM */ + smtc_seqw(0x66, (smtc_seqr(0x66) & 0xC3) | 0x10); + smtc_mmiowb(regno, dac_reg); + smtc_mmiowb(red >> 10, dac_val); + smtc_mmiowb(green >> 10, dac_val); + smtc_mmiowb(blue >> 10, dac_val); +} + +static void smtc_set_timing(struct smtcfb_info *sfb, struct par_info + *ppar_info) +{ + switch (ppar_info->chipID) { + case 0x710: + case 0x712: + case 0x720: + sm712_set_timing(sfb, ppar_info); + break; + } +} + +static struct fb_var_screeninfo smtcfb_var = { + .xres = 1024, + .yres = 600, + .xres_virtual = 1024, + .yres_virtual = 600, + .bits_per_pixel = 16, + .red = {16, 8, 0}, + .green = {8, 8, 0}, + .blue = {0, 8, 0}, + .activate = FB_ACTIVATE_NOW, + .height = -1, + .width = -1, + .vmode = FB_VMODE_NONINTERLACED, +}; + +static struct fb_fix_screeninfo smtcfb_fix = { + .id = "sm712fb", + .type = FB_TYPE_PACKED_PIXELS, + .visual = FB_VISUAL_TRUECOLOR, + .line_length = 800 * 3, + .accel = FB_ACCEL_SMI_LYNX, +}; + +/* chan_to_field + * + * convert a colour value into a field position + * + * from pxafb.c + */ + +static inline unsigned int chan_to_field(unsigned int chan, + struct fb_bitfield *bf) +{ + chan &= 0xffff; + chan >>= 16 - bf->length; + return chan << bf->offset; +} + +static int smtcfb_blank(int blank_mode, struct fb_info *info) +{ + /* clear DPMS setting */ + switch (blank_mode) { + case FB_BLANK_UNBLANK: + /* Screen On: HSync: On, VSync : On */ + smtc_seqw(0x01, (smtc_seqr(0x01) & (~0x20))); + smtc_seqw(0x6a, 0x16); + smtc_seqw(0x6b, 0x02); + smtc_seqw(0x21, (smtc_seqr(0x21) & 0x77)); + smtc_seqw(0x22, (smtc_seqr(0x22) & (~0x30))); + smtc_seqw(0x23, (smtc_seqr(0x23) & (~0xc0))); + smtc_seqw(0x24, (smtc_seqr(0x24) | 0x01)); + smtc_seqw(0x31, (smtc_seqr(0x31) | 0x03)); + break; + case FB_BLANK_NORMAL: + /* Screen Off: HSync: On, VSync : On Soft blank */ + smtc_seqw(0x01, (smtc_seqr(0x01) & (~0x20))); + smtc_seqw(0x6a, 0x16); + smtc_seqw(0x6b, 0x02); + smtc_seqw(0x22, (smtc_seqr(0x22) & (~0x30))); + smtc_seqw(0x23, (smtc_seqr(0x23) & (~0xc0))); + smtc_seqw(0x24, (smtc_seqr(0x24) | 0x01)); + smtc_seqw(0x31, ((smtc_seqr(0x31) & (~0x07)) | 0x00)); + break; + case FB_BLANK_VSYNC_SUSPEND: + /* Screen On: HSync: On, VSync : Off */ + smtc_seqw(0x01, (smtc_seqr(0x01) | 0x20)); + smtc_seqw(0x20, (smtc_seqr(0x20) & (~0xB0))); + smtc_seqw(0x6a, 0x0c); + smtc_seqw(0x6b, 0x02); + smtc_seqw(0x21, (smtc_seqr(0x21) | 0x88)); + smtc_seqw(0x22, ((smtc_seqr(0x22) & (~0x30)) | 0x20)); + smtc_seqw(0x23, ((smtc_seqr(0x23) & (~0xc0)) | 0x20)); + smtc_seqw(0x24, (smtc_seqr(0x24) & (~0x01))); + smtc_seqw(0x31, ((smtc_seqr(0x31) & (~0x07)) | 0x00)); + smtc_seqw(0x34, (smtc_seqr(0x34) | 0x80)); + break; + case FB_BLANK_HSYNC_SUSPEND: + /* Screen On: HSync: Off, VSync : On */ + smtc_seqw(0x01, (smtc_seqr(0x01) | 0x20)); + smtc_seqw(0x20, (smtc_seqr(0x20) & (~0xB0))); + smtc_seqw(0x6a, 0x0c); + smtc_seqw(0x6b, 0x02); + smtc_seqw(0x21, (smtc_seqr(0x21) | 0x88)); + smtc_seqw(0x22, ((smtc_seqr(0x22) & (~0x30)) | 0x10)); + smtc_seqw(0x23, ((smtc_seqr(0x23) & (~0xc0)) | 0xD8)); + smtc_seqw(0x24, (smtc_seqr(0x24) & (~0x01))); + smtc_seqw(0x31, ((smtc_seqr(0x31) & (~0x07)) | 0x00)); + smtc_seqw(0x34, (smtc_seqr(0x34) | 0x80)); + break; + case FB_BLANK_POWERDOWN: + /* Screen On: HSync: Off, VSync : Off */ + smtc_seqw(0x01, (smtc_seqr(0x01) | 0x20)); + smtc_seqw(0x20, (smtc_seqr(0x20) & (~0xB0))); + smtc_seqw(0x6a, 0x0c); + smtc_seqw(0x6b, 0x02); + smtc_seqw(0x21, (smtc_seqr(0x21) | 0x88)); + smtc_seqw(0x22, ((smtc_seqr(0x22) & (~0x30)) | 0x30)); + smtc_seqw(0x23, ((smtc_seqr(0x23) & (~0xc0)) | 0xD8)); + smtc_seqw(0x24, (smtc_seqr(0x24) & (~0x01))); + smtc_seqw(0x31, ((smtc_seqr(0x31) & (~0x07)) | 0x00)); + smtc_seqw(0x34, (smtc_seqr(0x34) | 0x80)); + break; + default: + return -EINVAL; + } + + return 0; +} + +static int smtc_setcolreg(unsigned regno, unsigned red, unsigned green, + unsigned blue, unsigned trans, struct fb_info *info) +{ + struct smtcfb_info *sfb = (struct smtcfb_info *)info; + u32 val; + + if (regno > 255) + return 1; + + switch (sfb->fb.fix.visual) { + case FB_VISUAL_DIRECTCOLOR: + case FB_VISUAL_TRUECOLOR: + /* + * 16/32 bit true-colour, use pseuo-palette for 16 base color + */ + if (regno < 16) { + if (sfb->fb.var.bits_per_pixel == 16) { + u32 *pal = sfb->fb.pseudo_palette; + val = chan_to_field(red, &sfb->fb.var.red); + val |= chan_to_field(green, \ + &sfb->fb.var.green); + val |= chan_to_field(blue, &sfb->fb.var.blue); +#ifdef __BIG_ENDIAN + pal[regno] = + ((red & 0xf800) >> 8) | + ((green & 0xe000) >> 13) | + ((green & 0x1c00) << 3) | + ((blue & 0xf800) >> 3); +#else + pal[regno] = val; +#endif + } else { + u32 *pal = sfb->fb.pseudo_palette; + val = chan_to_field(red, &sfb->fb.var.red); + val |= chan_to_field(green, \ + &sfb->fb.var.green); + val |= chan_to_field(blue, &sfb->fb.var.blue); +#ifdef __BIG_ENDIAN + val = + (val & 0xff00ff00 >> 8) | + (val & 0x00ff00ff << 8); +#endif + pal[regno] = val; + } + } + break; + + case FB_VISUAL_PSEUDOCOLOR: + /* color depth 8 bit */ + sm712_setpalette(regno, red, green, blue, info); + break; + + default: + return 1; /* unknown type */ + } + + return 0; + +} + +#ifdef __BIG_ENDIAN +static ssize_t smtcfb_read(struct fb_info *info, char __user * buf, size_t + count, loff_t *ppos) +{ + unsigned long p = *ppos; + + u32 *buffer, *dst; + u32 __iomem *src; + int c, i, cnt = 0, err = 0; + unsigned long total_size; + + if (!info || !info->screen_base) + return -ENODEV; + + if (info->state != FBINFO_STATE_RUNNING) + return -EPERM; + + total_size = info->screen_size; + + if (total_size == 0) + total_size = info->fix.smem_len; + + if (p >= total_size) + return 0; + + if (count >= total_size) + count = total_size; + + if (count + p > total_size) + count = total_size - p; + + buffer = kmalloc((count > PAGE_SIZE) ? PAGE_SIZE : count, GFP_KERNEL); + if (!buffer) + return -ENOMEM; + + src = (u32 __iomem *) (info->screen_base + p); + + if (info->fbops->fb_sync) + info->fbops->fb_sync(info); + + while (count) { + c = (count > PAGE_SIZE) ? PAGE_SIZE : count; + dst = buffer; + for (i = c >> 2; i--;) { + *dst = fb_readl(src++); + *dst = + (*dst & 0xff00ff00 >> 8) | + (*dst & 0x00ff00ff << 8); + dst++; + } + if (c & 3) { + u8 *dst8 = (u8 *) dst; + u8 __iomem *src8 = (u8 __iomem *) src; + + for (i = c & 3; i--;) { + if (i & 1) { + *dst8++ = fb_readb(++src8); + } else { + *dst8++ = fb_readb(--src8); + src8 += 2; + } + } + src = (u32 __iomem *) src8; + } + + if (copy_to_user(buf, buffer, c)) { + err = -EFAULT; + break; + } + *ppos += c; + buf += c; + cnt += c; + count -= c; + } + + kfree(buffer); + + return (err) ? err : cnt; +} + +static ssize_t +smtcfb_write(struct fb_info *info, const char __user *buf, size_t count, + loff_t *ppos) +{ + unsigned long p = *ppos; + + u32 *buffer, *src; + u32 __iomem *dst; + int c, i, cnt = 0, err = 0; + unsigned long total_size; + + if (!info || !info->screen_base) + return -ENODEV; + + if (info->state != FBINFO_STATE_RUNNING) + return -EPERM; + + total_size = info->screen_size; + + if (total_size == 0) + total_size = info->fix.smem_len; + + if (p > total_size) + return -EFBIG; + + if (count > total_size) { + err = -EFBIG; + count = total_size; + } + + if (count + p > total_size) { + if (!err) + err = -ENOSPC; + + count = total_size - p; + } + + buffer = kmalloc((count > PAGE_SIZE) ? PAGE_SIZE : count, GFP_KERNEL); + if (!buffer) + return -ENOMEM; + + dst = (u32 __iomem *) (info->screen_base + p); + + if (info->fbops->fb_sync) + info->fbops->fb_sync(info); + + while (count) { + c = (count > PAGE_SIZE) ? PAGE_SIZE : count; + src = buffer; + + if (copy_from_user(src, buf, c)) { + err = -EFAULT; + break; + } + + for (i = c >> 2; i--;) { + fb_writel((*src & 0xff00ff00 >> 8) | + (*src & 0x00ff00ff << 8), dst++); + src++; + } + if (c & 3) { + u8 *src8 = (u8 *) src; + u8 __iomem *dst8 = (u8 __iomem *) dst; + + for (i = c & 3; i--;) { + if (i & 1) { + fb_writeb(*src8++, ++dst8); + } else { + fb_writeb(*src8++, --dst8); + dst8 += 2; + } + } + dst = (u32 __iomem *) dst8; + } + + *ppos += c; + buf += c; + cnt += c; + count -= c; + } + + kfree(buffer); + + return (cnt) ? cnt : err; +} +#endif /* ! __BIG_ENDIAN */ + +#include "smtc2d.c" + +void smtcfb_copyarea(struct fb_info *info, const struct fb_copyarea *area) +{ + struct par_info *p = (struct par_info *)info->par; + + if (smtc_2Dacceleration) { + if (!area->width || !area->height) + return; + + deCopy(p->BaseAddressInVRAM, 0, info->var.bits_per_pixel, + area->dx, area->dy, area->width, area->height, + p->BaseAddressInVRAM, 0, area->sx, area->sy, 0, 0xC); + + } else + cfb_copyarea(info, area); +} + +void smtcfb_fillrect(struct fb_info *info, const struct fb_fillrect *rect) +{ + struct par_info *p = (struct par_info *)info->par; + + if (smtc_2Dacceleration) { + if (!rect->width || !rect->height) + return; + if (info->var.bits_per_pixel >= 24) + deFillRect(p->BaseAddressInVRAM, 0, rect->dx * 3, + rect->dy * 3, rect->width * 3, rect->height, + rect->color); + else + deFillRect(p->BaseAddressInVRAM, 0, rect->dx, rect->dy, + rect->width, rect->height, rect->color); + } else + cfb_fillrect(info, rect); +} + +void smtcfb_imageblit(struct fb_info *info, const struct fb_image *image) +{ + struct par_info *p = (struct par_info *)info->par; + u32 bg_col = 0, fg_col = 0; + + if ((smtc_2Dacceleration) && (image->depth == 1)) { + if (smtc_de_busy) + deWaitForNotBusy(); + + switch (info->var.bits_per_pixel) { + case 8: + bg_col = image->bg_color; + fg_col = image->fg_color; + break; + case 16: + bg_col = + ((u32 *) (info->pseudo_palette))[image->bg_color]; + fg_col = + ((u32 *) (info->pseudo_palette))[image->fg_color]; + break; + case 32: + bg_col = + ((u32 *) (info->pseudo_palette))[image->bg_color]; + fg_col = + ((u32 *) (info->pseudo_palette))[image->fg_color]; + break; + } + + deSystemMem2VideoMemMonoBlt( + image->data, + image->width / 8, + 0, + p->BaseAddressInVRAM, + 0, + 0, + image->dx, image->dy, + image->width, image->height, + fg_col, bg_col, + 0x0C); + + } else + cfb_imageblit(info, image); +} + +static struct fb_ops smtcfb_ops = { + .owner = THIS_MODULE, + .fb_setcolreg = smtc_setcolreg, + .fb_blank = smtcfb_blank, + .fb_fillrect = smtcfb_fillrect, + .fb_imageblit = smtcfb_imageblit, + .fb_copyarea = smtcfb_copyarea, +#ifdef __BIG_ENDIAN + .fb_read = smtcfb_read, + .fb_write = smtcfb_write, +#endif + +}; + +void smtcfb_setmode(struct smtcfb_info *sfb) +{ + switch (sfb->fb.var.bits_per_pixel) { + case 32: + sfb->fb.fix.visual = FB_VISUAL_TRUECOLOR; + sfb->fb.fix.line_length = sfb->fb.var.xres * 4; + sfb->fb.var.red.length = 8; + sfb->fb.var.green.length = 8; + sfb->fb.var.blue.length = 8; + sfb->fb.var.red.offset = 16; + sfb->fb.var.green.offset = 8; + sfb->fb.var.blue.offset = 0; + + break; + case 8: + sfb->fb.fix.visual = FB_VISUAL_PSEUDOCOLOR; + sfb->fb.fix.line_length = sfb->fb.var.xres; + sfb->fb.var.red.offset = 5; + sfb->fb.var.red.length = 3; + sfb->fb.var.green.offset = 2; + sfb->fb.var.green.length = 3; + sfb->fb.var.blue.offset = 0; + sfb->fb.var.blue.length = 2; + break; + case 24: + sfb->fb.fix.visual = FB_VISUAL_TRUECOLOR; + sfb->fb.fix.line_length = sfb->fb.var.xres * 3; + sfb->fb.var.red.length = 8; + sfb->fb.var.green.length = 8; + sfb->fb.var.blue.length = 8; + + sfb->fb.var.red.offset = 16; + sfb->fb.var.green.offset = 8; + sfb->fb.var.blue.offset = 0; + + break; + case 16: + default: + sfb->fb.fix.visual = FB_VISUAL_TRUECOLOR; + sfb->fb.fix.line_length = sfb->fb.var.xres * 2; + + sfb->fb.var.red.length = 5; + sfb->fb.var.green.length = 6; + sfb->fb.var.blue.length = 5; + + sfb->fb.var.red.offset = 11; + sfb->fb.var.green.offset = 5; + sfb->fb.var.blue.offset = 0; + + break; + } + + hw.width = sfb->fb.var.xres; + hw.height = sfb->fb.var.yres; + hw.hz = 60; + smtc_set_timing(sfb, &hw); + if (smtc_2Dacceleration) { + printk("2D acceleration enabled!\n"); + /* Init smtc drawing engine */ + deInit(sfb->fb.var.xres, sfb->fb.var.yres, + sfb->fb.var.bits_per_pixel); + } +} + +/* + * Alloc struct smtcfb_info and assign the default value + */ +static struct smtcfb_info *smtc_alloc_fb_info(struct pci_dev *dev, + char *name) +{ + struct smtcfb_info *sfb; + + sfb = kmalloc(sizeof(struct smtcfb_info), GFP_KERNEL); + + if (!sfb) + return NULL; + + memset(sfb, 0, sizeof(struct smtcfb_info)); + + sfb->currcon = -1; + sfb->dev = dev; + + /*** Init sfb->fb with default value ***/ + sfb->fb.flags = FBINFO_FLAG_DEFAULT; + sfb->fb.fbops = &smtcfb_ops; + sfb->fb.var = smtcfb_var; + sfb->fb.fix = smtcfb_fix; + + strcpy(sfb->fb.fix.id, name); + + sfb->fb.fix.type = FB_TYPE_PACKED_PIXELS; + sfb->fb.fix.type_aux = 0; + sfb->fb.fix.xpanstep = 0; + sfb->fb.fix.ypanstep = 0; + sfb->fb.fix.ywrapstep = 0; + sfb->fb.fix.accel = FB_ACCEL_SMI_LYNX; + + sfb->fb.var.nonstd = 0; + sfb->fb.var.activate = FB_ACTIVATE_NOW; + sfb->fb.var.height = -1; + sfb->fb.var.width = -1; + /* text mode acceleration */ + sfb->fb.var.accel_flags = FB_ACCELF_TEXT; + sfb->fb.var.vmode = FB_VMODE_NONINTERLACED; + sfb->fb.par = &hw; + sfb->fb.pseudo_palette = colreg; + + return sfb; +} + +/* + * Unmap in the memory mapped IO registers + */ + +static void smtc_unmap_mmio(struct smtcfb_info *sfb) +{ + if (sfb && smtc_RegBaseAddress) + smtc_RegBaseAddress = NULL; +} + +/* + * Map in the screen memory + */ + +static int smtc_map_smem(struct smtcfb_info *sfb, + struct pci_dev *dev, u_long smem_len) +{ + if (sfb->fb.var.bits_per_pixel == 32) { +#ifdef __BIG_ENDIAN + sfb->fb.fix.smem_start = pci_resource_start(dev, 0) + + 0x800000; +#else + sfb->fb.fix.smem_start = pci_resource_start(dev, 0); +#endif + } else { + sfb->fb.fix.smem_start = pci_resource_start(dev, 0); + } + + sfb->fb.fix.smem_len = smem_len; + + sfb->fb.screen_base = smtc_VRAMBaseAddress; + + if (!sfb->fb.screen_base) { + printk(KERN_INFO "%s: unable to map screen memory\n", + sfb->fb.fix.id); + return -ENOMEM; + } + + return 0; +} + +/* + * Unmap in the screen memory + * + */ +static void smtc_unmap_smem(struct smtcfb_info *sfb) +{ + if (sfb && sfb->fb.screen_base) { + iounmap(sfb->fb.screen_base); + sfb->fb.screen_base = NULL; + } +} + +/* + * We need to wake up the LynxEM+, and make sure its in linear memory mode. + */ +static inline void sm7xx_init_hw(void) +{ + outb_p(0x18, 0x3c4); + outb_p(0x11, 0x3c5); +} + +static void smtc_free_fb_info(struct smtcfb_info *sfb) +{ + if (sfb) { + fb_alloc_cmap(&sfb->fb.cmap, 0, 0); + kfree(sfb); + } +} + +/* + * sm712vga_setup - process command line options, get vga parameter + * @options: string of options + * Returns zero. + * + */ +static int __init __maybe_unused sm712vga_setup(char *options) +{ + int index; + + if (!options || !*options) { + smdbg("\n No vga parameter\n"); + return -EINVAL; + } + + smtc_screen_info.lfb_width = 0; + smtc_screen_info.lfb_height = 0; + smtc_screen_info.lfb_depth = 0; + + smdbg("\nsm712vga_setup = %s\n", options); + + for (index = 0; + index < (sizeof(vesa_mode) / sizeof(struct vesa_mode_table)); + index++) { + if (strstr(options, vesa_mode[index].mode_index)) { + smtc_screen_info.lfb_width = vesa_mode[index].lfb_width; + smtc_screen_info.lfb_height = + vesa_mode[index].lfb_height; + smtc_screen_info.lfb_depth = vesa_mode[index].lfb_depth; + return 0; + } + } + + return -1; +} +__setup("vga=", sm712vga_setup); + +/* Jason (08/13/2009) + * Original init function changed to probe method to be used by pci_drv + * process used to detect chips replaced with kernel process in pci_drv + */ +static int __init smtcfb_pci_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct smtcfb_info *sfb; + u_long smem_size = 0x00800000; /* default 8MB */ + char name[16]; + int err; + unsigned long pFramebufferPhysical; + + printk(KERN_INFO + "Silicon Motion display driver " SMTC_LINUX_FB_VERSION "\n"); + + err = pci_enable_device(pdev); /* enable SMTC chip */ + + if (err) + return err; + err = -ENOMEM; + + hw.chipID = ent->device; + sprintf(name, "sm%Xfb", hw.chipID); + + sfb = smtc_alloc_fb_info(pdev, name); + + if (!sfb) + goto failed; + /* Jason (08/13/2009) + * Store fb_info to be further used when suspending and resuming + */ + pci_set_drvdata(pdev, sfb); + + sm7xx_init_hw(); + + /*get mode parameter from smtc_screen_info */ + if (smtc_screen_info.lfb_width != 0) { + sfb->fb.var.xres = smtc_screen_info.lfb_width; + sfb->fb.var.yres = smtc_screen_info.lfb_height; + sfb->fb.var.bits_per_pixel = smtc_screen_info.lfb_depth; + } else { + /* default resolution 1024x600 16bit mode */ + sfb->fb.var.xres = SCREEN_X_RES; + sfb->fb.var.yres = SCREEN_Y_RES; + sfb->fb.var.bits_per_pixel = SCREEN_BPP; + } + +#ifdef __BIG_ENDIAN + if (sfb->fb.var.bits_per_pixel == 24) + sfb->fb.var.bits_per_pixel = (smtc_screen_info.lfb_depth = 32); +#endif + /* Map address and memory detection */ + pFramebufferPhysical = pci_resource_start(pdev, 0); + pci_read_config_byte(pdev, PCI_REVISION_ID, &hw.chipRevID); + + switch (hw.chipID) { + case 0x710: + case 0x712: + sfb->fb.fix.mmio_start = pFramebufferPhysical + 0x00400000; + sfb->fb.fix.mmio_len = 0x00400000; + smem_size = SM712_VIDEOMEMORYSIZE; +#ifdef __BIG_ENDIAN + hw.m_pLFB = (smtc_VRAMBaseAddress = + ioremap(pFramebufferPhysical, 0x00c00000)); +#else + hw.m_pLFB = (smtc_VRAMBaseAddress = + ioremap(pFramebufferPhysical, 0x00800000)); +#endif + hw.m_pMMIO = (smtc_RegBaseAddress = + smtc_VRAMBaseAddress + 0x00700000); + smtc_2DBaseAddress = (hw.m_pDPR = + smtc_VRAMBaseAddress + 0x00408000); + smtc_2Ddataport = smtc_VRAMBaseAddress + DE_DATA_PORT_712; + hw.m_pVPR = hw.m_pLFB + 0x0040c000; +#ifdef __BIG_ENDIAN + if (sfb->fb.var.bits_per_pixel == 32) { + smtc_VRAMBaseAddress += 0x800000; + hw.m_pLFB += 0x800000; + printk(KERN_INFO + "\nsmtc_VRAMBaseAddress=%p hw.m_pLFB=%p\n", + smtc_VRAMBaseAddress, hw.m_pLFB); + } +#endif + if (!smtc_RegBaseAddress) { + printk(KERN_INFO + "%s: unable to map memory mapped IO\n", + sfb->fb.fix.id); + return -ENOMEM; + } + + /* set MCLK = 14.31818 * (0x16 / 0x2) */ + smtc_seqw(0x6a, 0x16); + smtc_seqw(0x6b, 0x02); + smtc_seqw(0x62, 0x3e); + /* enable PCI burst */ + smtc_seqw(0x17, 0x20); + /* enable word swap */ +#ifdef __BIG_ENDIAN + if (sfb->fb.var.bits_per_pixel == 32) + smtc_seqw(0x17, 0x30); +#endif +#ifdef CONFIG_FB_SM7XX_ACCEL + smtc_2Dacceleration = 1; +#endif + break; + case 0x720: + sfb->fb.fix.mmio_start = pFramebufferPhysical; + sfb->fb.fix.mmio_len = 0x00200000; + smem_size = SM722_VIDEOMEMORYSIZE; + smtc_2DBaseAddress = (hw.m_pDPR = + ioremap(pFramebufferPhysical, 0x00a00000)); + hw.m_pLFB = (smtc_VRAMBaseAddress = + smtc_2DBaseAddress + 0x00200000); + hw.m_pMMIO = (smtc_RegBaseAddress = + smtc_2DBaseAddress + 0x000c0000); + smtc_2Ddataport = smtc_2DBaseAddress + DE_DATA_PORT_722; + hw.m_pVPR = smtc_2DBaseAddress + 0x800; + + smtc_seqw(0x62, 0xff); + smtc_seqw(0x6a, 0x0d); + smtc_seqw(0x6b, 0x02); + smtc_2Dacceleration = 0; + break; + default: + printk(KERN_INFO + "No valid Silicon Motion display chip was detected!\n"); + + smtc_free_fb_info(sfb); + return err; + } + + /* can support 32 bpp */ + if (15 == sfb->fb.var.bits_per_pixel) + sfb->fb.var.bits_per_pixel = 16; + + sfb->fb.var.xres_virtual = sfb->fb.var.xres; + sfb->fb.var.yres_virtual = sfb->fb.var.yres; + err = smtc_map_smem(sfb, pdev, smem_size); + if (err) + goto failed; + + smtcfb_setmode(sfb); + /* Primary display starting from 0 postion */ + hw.BaseAddressInVRAM = 0; + sfb->fb.par = &hw; + + err = register_framebuffer(&sfb->fb); + if (err < 0) + goto failed; + + printk(KERN_INFO "Silicon Motion SM%X Rev%X primary display mode" + "%dx%d-%d Init Complete.\n", hw.chipID, hw.chipRevID, + sfb->fb.var.xres, sfb->fb.var.yres, + sfb->fb.var.bits_per_pixel); + + return 0; + + failed: + printk(KERN_INFO "Silicon Motion, Inc. primary display init fail\n"); + + smtc_unmap_smem(sfb); + smtc_unmap_mmio(sfb); + smtc_free_fb_info(sfb); + + return err; +} + + +/* Jason (08/11/2009) PCI_DRV wrapper essential structs */ +static struct pci_device_id smtcfb_pci_table[] = { + {0x126f, 0x710, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {0x126f, 0x712, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {0x126f, 0x720, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {0,} +}; + + +/* Jason (08/14/2009) + * do some clean up when the driver module is removed + */ +static void __devexit smtcfb_pci_remove(struct pci_dev *pdev) +{ + struct smtcfb_info *sfb; + + sfb = pci_get_drvdata(pdev); + pci_set_drvdata(pdev, NULL); + smtc_unmap_smem(sfb); + smtc_unmap_mmio(sfb); + unregister_framebuffer(&sfb->fb); + smtc_free_fb_info(sfb); +} + +/* Jason (08/14/2009) + * suspend function, called when the suspend event is triggered + */ +static int __maybe_unused smtcfb_suspend(struct pci_dev *pdev, pm_message_t msg) +{ + struct smtcfb_info *sfb; + int retv; + + sfb = pci_get_drvdata(pdev); + + /* set the hw in sleep mode use externel clock and self memory refresh + * so that we can turn off internal PLLs later on + */ + smtc_seqw(0x20, (smtc_seqr(0x20) | 0xc0)); + smtc_seqw(0x69, (smtc_seqr(0x69) & 0xf7)); + + switch (msg.event) { + case PM_EVENT_FREEZE: + case PM_EVENT_PRETHAW: + pdev->dev.power.power_state = msg; + return 0; + } + + /* when doing suspend, call fb apis and pci apis */ + if (msg.event == PM_EVENT_SUSPEND) { + acquire_console_sem(); + fb_set_suspend(&sfb->fb, 1); + release_console_sem(); + retv = pci_save_state(pdev); + pci_disable_device(pdev); + retv = pci_choose_state(pdev, msg); + retv = pci_set_power_state(pdev, retv); + } + + pdev->dev.power.power_state = msg; + + /* additionaly turn off all function blocks including internal PLLs */ + smtc_seqw(0x21, 0xff); + + return 0; +} + +static int __maybe_unused smtcfb_resume(struct pci_dev *pdev) +{ + struct smtcfb_info *sfb; + int retv; + + sfb = pci_get_drvdata(pdev); + + /* when resuming, restore pci data and fb cursor */ + if (pdev->dev.power.power_state.event != PM_EVENT_FREEZE) { + retv = pci_set_power_state(pdev, PCI_D0); + retv = pci_restore_state(pdev); + if (pci_enable_device(pdev)) + return -1; + pci_set_master(pdev); + } + + /* reinit hardware */ + sm7xx_init_hw(); + switch (hw.chipID) { + case 0x710: + case 0x712: + /* set MCLK = 14.31818 * (0x16 / 0x2) */ + smtc_seqw(0x6a, 0x16); + smtc_seqw(0x6b, 0x02); + smtc_seqw(0x62, 0x3e); + /* enable PCI burst */ + smtc_seqw(0x17, 0x20); +#ifdef __BIG_ENDIAN + if (sfb->fb.var.bits_per_pixel == 32) + smtc_seqw(0x17, 0x30); +#endif + break; + case 0x720: + smtc_seqw(0x62, 0xff); + smtc_seqw(0x6a, 0x0d); + smtc_seqw(0x6b, 0x02); + break; + } + + smtc_seqw(0x34, (smtc_seqr(0x34) | 0xc0)); + smtc_seqw(0x33, ((smtc_seqr(0x33) | 0x08) & 0xfb)); + + smtcfb_setmode(sfb); + + acquire_console_sem(); + fb_set_suspend(&sfb->fb, 0); + release_console_sem(); + + return 0; +} + +/* Jason (08/13/2009) + * pci_driver struct used to wrap the original driver + * so that it can be registered into the kernel and + * the proper method would be called when suspending and resuming + */ +static struct pci_driver smtcfb_driver = { + .name = "smtcfb", + .id_table = smtcfb_pci_table, + .probe = smtcfb_pci_probe, + .remove = __devexit_p(smtcfb_pci_remove), +#ifdef CONFIG_PM + .suspend = smtcfb_suspend, + .resume = smtcfb_resume, +#endif +}; + +static int __init smtcfb_init(void) +{ + return pci_register_driver(&smtcfb_driver); +} + +static void __exit smtcfb_exit(void) +{ + pci_unregister_driver(&smtcfb_driver); +} + +module_init(smtcfb_init); +module_exit(smtcfb_exit); + +MODULE_AUTHOR("Siliconmotion "); +MODULE_DESCRIPTION("Framebuffer driver for SMI Graphic Cards"); +MODULE_LICENSE("GPL"); diff --git a/drivers/staging/sm7xx/smtcfb.h b/drivers/staging/sm7xx/smtcfb.h new file mode 100644 index 000000000000..7f2c34138215 --- /dev/null +++ b/drivers/staging/sm7xx/smtcfb.h @@ -0,0 +1,793 @@ +/* + * Silicon Motion SM712 frame buffer device + * + * Copyright (C) 2006 Silicon Motion Technology Corp. + * Authors: Ge Wang, gewang@siliconmotion.com + * Boyod boyod.yang@siliconmotion.com.cn + * + * Copyright (C) 2009 Lemote, Inc. + * Author: Wu Zhangjin, wuzj@lemote.com + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive for + * more details. + */ + +#define SMTC_LINUX_FB_VERSION "version 0.11.2619.21.01 July 27, 2008" + +#define NR_PALETTE 256 +#define NR_RGB 2 + +#define FB_ACCEL_SMI_LYNX 88 + +#ifdef __BIG_ENDIAN +#define PC_VGA 0 +#else +#define PC_VGA 1 +#endif + +#define SCREEN_X_RES 1024 +#define SCREEN_Y_RES 600 +#define SCREEN_BPP 16 + +#ifndef FIELD_OFFSET +#define FIELD_OFSFET(type, field) \ + ((unsigned long) (PUCHAR) & (((type *)0)->field)) +#endif + +/*Assume SM712 graphics chip has 4MB VRAM */ +#define SM712_VIDEOMEMORYSIZE 0x00400000 +/*Assume SM722 graphics chip has 8MB VRAM */ +#define SM722_VIDEOMEMORYSIZE 0x00800000 + +#define dac_reg (0x3c8) +#define dac_val (0x3c9) + +extern char *smtc_RegBaseAddress; +#define smtc_mmiowb(dat, reg) writeb(dat, smtc_RegBaseAddress + reg) +#define smtc_mmioww(dat, reg) writew(dat, smtc_RegBaseAddress + reg) +#define smtc_mmiowl(dat, reg) writel(dat, smtc_RegBaseAddress + reg) + +#define smtc_mmiorb(reg) readb(smtc_RegBaseAddress + reg) +#define smtc_mmiorw(reg) readw(smtc_RegBaseAddress + reg) +#define smtc_mmiorl(reg) readl(smtc_RegBaseAddress + reg) + +#define SIZE_SR00_SR04 (0x04 - 0x00 + 1) +#define SIZE_SR10_SR24 (0x24 - 0x10 + 1) +#define SIZE_SR30_SR75 (0x75 - 0x30 + 1) +#define SIZE_SR80_SR93 (0x93 - 0x80 + 1) +#define SIZE_SRA0_SRAF (0xAF - 0xA0 + 1) +#define SIZE_GR00_GR08 (0x08 - 0x00 + 1) +#define SIZE_AR00_AR14 (0x14 - 0x00 + 1) +#define SIZE_CR00_CR18 (0x18 - 0x00 + 1) +#define SIZE_CR30_CR4D (0x4D - 0x30 + 1) +#define SIZE_CR90_CRA7 (0xA7 - 0x90 + 1) +#define SIZE_VPR (0x6C + 1) +#define SIZE_DPR (0x44 + 1) + +static inline void smtc_crtcw(int reg, int val) +{ + smtc_mmiowb(reg, 0x3d4); + smtc_mmiowb(val, 0x3d5); +} + +static inline unsigned int smtc_crtcr(int reg) +{ + smtc_mmiowb(reg, 0x3d4); + return smtc_mmiorb(0x3d5); +} + +static inline void smtc_grphw(int reg, int val) +{ + smtc_mmiowb(reg, 0x3ce); + smtc_mmiowb(val, 0x3cf); +} + +static inline unsigned int smtc_grphr(int reg) +{ + smtc_mmiowb(reg, 0x3ce); + return smtc_mmiorb(0x3cf); +} + +static inline void smtc_attrw(int reg, int val) +{ + smtc_mmiorb(0x3da); + smtc_mmiowb(reg, 0x3c0); + smtc_mmiorb(0x3c1); + smtc_mmiowb(val, 0x3c0); +} + +static inline void smtc_seqw(int reg, int val) +{ + smtc_mmiowb(reg, 0x3c4); + smtc_mmiowb(val, 0x3c5); +} + +static inline unsigned int smtc_seqr(int reg) +{ + smtc_mmiowb(reg, 0x3c4); + return smtc_mmiorb(0x3c5); +} + +/* The next structure holds all information relevant for a specific video mode. + */ + +struct ModeInit { + int mmSizeX; + int mmSizeY; + int bpp; + int hz; + unsigned char Init_MISC; + unsigned char Init_SR00_SR04[SIZE_SR00_SR04]; + unsigned char Init_SR10_SR24[SIZE_SR10_SR24]; + unsigned char Init_SR30_SR75[SIZE_SR30_SR75]; + unsigned char Init_SR80_SR93[SIZE_SR80_SR93]; + unsigned char Init_SRA0_SRAF[SIZE_SRA0_SRAF]; + unsigned char Init_GR00_GR08[SIZE_GR00_GR08]; + unsigned char Init_AR00_AR14[SIZE_AR00_AR14]; + unsigned char Init_CR00_CR18[SIZE_CR00_CR18]; + unsigned char Init_CR30_CR4D[SIZE_CR30_CR4D]; + unsigned char Init_CR90_CRA7[SIZE_CR90_CRA7]; +}; + +/********************************************************************** + SM712 Mode table. + **********************************************************************/ +struct ModeInit VGAMode[] = { + { + /* mode#0: 640 x 480 16Bpp 60Hz */ + 640, 480, 16, 60, + /* Init_MISC */ + 0xE3, + { /* Init_SR0_SR4 */ + 0x03, 0x01, 0x0F, 0x00, 0x0E, + }, + { /* Init_SR10_SR24 */ + 0xFF, 0xBE, 0xEF, 0xFF, 0x00, 0x0E, 0x17, 0x2C, + 0x99, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0xC4, 0x30, 0x02, 0x01, 0x01, + }, + { /* Init_SR30_SR75 */ + 0x32, 0x03, 0xA0, 0x09, 0xC0, 0x32, 0x32, 0x32, + 0x32, 0x32, 0x32, 0x32, 0x00, 0x00, 0x03, 0xFF, + 0x00, 0xFC, 0x00, 0x00, 0x20, 0x18, 0x00, 0xFC, + 0x20, 0x0C, 0x44, 0x20, 0x00, 0x32, 0x32, 0x32, + 0x04, 0x24, 0x63, 0x4F, 0x52, 0x0B, 0xDF, 0xEA, + 0x04, 0x50, 0x19, 0x32, 0x32, 0x00, 0x00, 0x32, + 0x01, 0x80, 0x7E, 0x1A, 0x1A, 0x00, 0x00, 0x00, + 0x50, 0x03, 0x74, 0x14, 0x07, 0x82, 0x07, 0x04, + 0x00, 0x45, 0x30, 0x30, 0x40, 0x30, + }, + { /* Init_SR80_SR93 */ + 0xFF, 0x07, 0x00, 0x6F, 0x7F, 0x7F, 0xFF, 0x32, + 0xF7, 0x00, 0x00, 0x00, 0xEF, 0xFF, 0x32, 0x32, + 0x00, 0x00, 0x00, 0x00, + }, + { /* Init_SRA0_SRAF */ + 0x00, 0xFF, 0xBF, 0xFF, 0xFF, 0xED, 0xED, 0xED, + 0x7B, 0xFF, 0xFF, 0xFF, 0xBF, 0xEF, 0xFF, 0xDF, + }, + { /* Init_GR00_GR08 */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x05, 0x0F, + 0xFF, + }, + { /* Init_AR00_AR14 */ + 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, + 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F, + 0x41, 0x00, 0x0F, 0x00, 0x00, + }, + { /* Init_CR00_CR18 */ + 0x5F, 0x4F, 0x4F, 0x00, 0x53, 0x1F, 0x0B, 0x3E, + 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0xEA, 0x0C, 0xDF, 0x50, 0x40, 0xDF, 0x00, 0xE3, + 0xFF, + }, + { /* Init_CR30_CR4D */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x55, 0x03, 0x20, + 0x00, 0x00, 0x00, 0x40, 0x00, 0xE7, 0xFF, 0xFD, + 0x5F, 0x4F, 0x00, 0x54, 0x00, 0x0B, 0xDF, 0x00, + 0xEA, 0x0C, 0x2E, 0x00, 0x4F, 0xDF, + }, + { /* Init_CR90_CRA7 */ + 0x56, 0xDD, 0x5E, 0xEA, 0x87, 0x44, 0x8F, 0x55, + 0x0A, 0x8F, 0x55, 0x0A, 0x00, 0x00, 0x18, 0x00, + 0x11, 0x10, 0x0B, 0x0A, 0x0A, 0x0A, 0x0A, 0x00, + }, + }, + { + /* mode#1: 640 x 480 24Bpp 60Hz */ + 640, 480, 24, 60, + /* Init_MISC */ + 0xE3, + { /* Init_SR0_SR4 */ + 0x03, 0x01, 0x0F, 0x00, 0x0E, + }, + { /* Init_SR10_SR24 */ + 0xFF, 0xBE, 0xEF, 0xFF, 0x00, 0x0E, 0x17, 0x2C, + 0x99, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0xC4, 0x30, 0x02, 0x01, 0x01, + }, + { /* Init_SR30_SR75 */ + 0x32, 0x03, 0xA0, 0x09, 0xC0, 0x32, 0x32, 0x32, + 0x32, 0x32, 0x32, 0x32, 0x00, 0x00, 0x03, 0xFF, + 0x00, 0xFC, 0x00, 0x00, 0x20, 0x18, 0x00, 0xFC, + 0x20, 0x0C, 0x44, 0x20, 0x00, 0x32, 0x32, 0x32, + 0x04, 0x24, 0x63, 0x4F, 0x52, 0x0B, 0xDF, 0xEA, + 0x04, 0x50, 0x19, 0x32, 0x32, 0x00, 0x00, 0x32, + 0x01, 0x80, 0x7E, 0x1A, 0x1A, 0x00, 0x00, 0x00, + 0x50, 0x03, 0x74, 0x14, 0x07, 0x82, 0x07, 0x04, + 0x00, 0x45, 0x30, 0x30, 0x40, 0x30, + }, + { /* Init_SR80_SR93 */ + 0xFF, 0x07, 0x00, 0x6F, 0x7F, 0x7F, 0xFF, 0x32, + 0xF7, 0x00, 0x00, 0x00, 0xEF, 0xFF, 0x32, 0x32, + 0x00, 0x00, 0x00, 0x00, + }, + { /* Init_SRA0_SRAF */ + 0x00, 0xFF, 0xBF, 0xFF, 0xFF, 0xED, 0xED, 0xED, + 0x7B, 0xFF, 0xFF, 0xFF, 0xBF, 0xEF, 0xFF, 0xDF, + }, + { /* Init_GR00_GR08 */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x05, 0x0F, + 0xFF, + }, + { /* Init_AR00_AR14 */ + 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, + 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F, + 0x41, 0x00, 0x0F, 0x00, 0x00, + }, + { /* Init_CR00_CR18 */ + 0x5F, 0x4F, 0x4F, 0x00, 0x53, 0x1F, 0x0B, 0x3E, + 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0xEA, 0x0C, 0xDF, 0x50, 0x40, 0xDF, 0x00, 0xE3, + 0xFF, + }, + { /* Init_CR30_CR4D */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x55, 0x03, 0x20, + 0x00, 0x00, 0x00, 0x40, 0x00, 0xE7, 0xFF, 0xFD, + 0x5F, 0x4F, 0x00, 0x54, 0x00, 0x0B, 0xDF, 0x00, + 0xEA, 0x0C, 0x2E, 0x00, 0x4F, 0xDF, + }, + { /* Init_CR90_CRA7 */ + 0x56, 0xDD, 0x5E, 0xEA, 0x87, 0x44, 0x8F, 0x55, + 0x0A, 0x8F, 0x55, 0x0A, 0x00, 0x00, 0x18, 0x00, + 0x11, 0x10, 0x0B, 0x0A, 0x0A, 0x0A, 0x0A, 0x00, + }, + }, + { + /* mode#0: 640 x 480 32Bpp 60Hz */ + 640, 480, 32, 60, + /* Init_MISC */ + 0xE3, + { /* Init_SR0_SR4 */ + 0x03, 0x01, 0x0F, 0x00, 0x0E, + }, + { /* Init_SR10_SR24 */ + 0xFF, 0xBE, 0xEF, 0xFF, 0x00, 0x0E, 0x17, 0x2C, + 0x99, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0xC4, 0x30, 0x02, 0x01, 0x01, + }, + { /* Init_SR30_SR75 */ + 0x32, 0x03, 0xA0, 0x09, 0xC0, 0x32, 0x32, 0x32, + 0x32, 0x32, 0x32, 0x32, 0x00, 0x00, 0x03, 0xFF, + 0x00, 0xFC, 0x00, 0x00, 0x20, 0x18, 0x00, 0xFC, + 0x20, 0x0C, 0x44, 0x20, 0x00, 0x32, 0x32, 0x32, + 0x04, 0x24, 0x63, 0x4F, 0x52, 0x0B, 0xDF, 0xEA, + 0x04, 0x50, 0x19, 0x32, 0x32, 0x00, 0x00, 0x32, + 0x01, 0x80, 0x7E, 0x1A, 0x1A, 0x00, 0x00, 0x00, + 0x50, 0x03, 0x74, 0x14, 0x07, 0x82, 0x07, 0x04, + 0x00, 0x45, 0x30, 0x30, 0x40, 0x30, + }, + { /* Init_SR80_SR93 */ + 0xFF, 0x07, 0x00, 0x6F, 0x7F, 0x7F, 0xFF, 0x32, + 0xF7, 0x00, 0x00, 0x00, 0xEF, 0xFF, 0x32, 0x32, + 0x00, 0x00, 0x00, 0x00, + }, + { /* Init_SRA0_SRAF */ + 0x00, 0xFF, 0xBF, 0xFF, 0xFF, 0xED, 0xED, 0xED, + 0x7B, 0xFF, 0xFF, 0xFF, 0xBF, 0xEF, 0xFF, 0xDF, + }, + { /* Init_GR00_GR08 */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x05, 0x0F, + 0xFF, + }, + { /* Init_AR00_AR14 */ + 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, + 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F, + 0x41, 0x00, 0x0F, 0x00, 0x00, + }, + { /* Init_CR00_CR18 */ + 0x5F, 0x4F, 0x4F, 0x00, 0x53, 0x1F, 0x0B, 0x3E, + 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0xEA, 0x0C, 0xDF, 0x50, 0x40, 0xDF, 0x00, 0xE3, + 0xFF, + }, + { /* Init_CR30_CR4D */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x55, 0x03, 0x20, + 0x00, 0x00, 0x00, 0x40, 0x00, 0xE7, 0xFF, 0xFD, + 0x5F, 0x4F, 0x00, 0x54, 0x00, 0x0B, 0xDF, 0x00, + 0xEA, 0x0C, 0x2E, 0x00, 0x4F, 0xDF, + }, + { /* Init_CR90_CRA7 */ + 0x56, 0xDD, 0x5E, 0xEA, 0x87, 0x44, 0x8F, 0x55, + 0x0A, 0x8F, 0x55, 0x0A, 0x00, 0x00, 0x18, 0x00, + 0x11, 0x10, 0x0B, 0x0A, 0x0A, 0x0A, 0x0A, 0x00, + }, + }, + + { /* mode#2: 800 x 600 16Bpp 60Hz */ + 800, 600, 16, 60, + /* Init_MISC */ + 0x2B, + { /* Init_SR0_SR4 */ + 0x03, 0x01, 0x0F, 0x03, 0x0E, + }, + { /* Init_SR10_SR24 */ + 0xFF, 0xBE, 0xEE, 0xFF, 0x00, 0x0E, 0x17, 0x2C, + 0x99, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, + 0xC4, 0x30, 0x02, 0x01, 0x01, + }, + { /* Init_SR30_SR75 */ + 0x34, 0x03, 0x20, 0x09, 0xC0, 0x24, 0x24, 0x24, + 0x24, 0x24, 0x24, 0x24, 0x00, 0x00, 0x03, 0xFF, + 0x00, 0xFC, 0x00, 0x00, 0x20, 0x38, 0x00, 0xFC, + 0x20, 0x0C, 0x44, 0x20, 0x00, 0x24, 0x24, 0x24, + 0x04, 0x48, 0x83, 0x63, 0x68, 0x72, 0x57, 0x58, + 0x04, 0x55, 0x59, 0x24, 0x24, 0x00, 0x00, 0x24, + 0x01, 0x80, 0x7A, 0x1A, 0x1A, 0x00, 0x00, 0x00, + 0x50, 0x03, 0x74, 0x14, 0x1C, 0x85, 0x35, 0x13, + 0x02, 0x45, 0x30, 0x35, 0x40, 0x20, + }, + { /* Init_SR80_SR93 */ + 0x00, 0x00, 0x00, 0x6F, 0x7F, 0x7F, 0xFF, 0x24, + 0x00, 0x00, 0x00, 0x00, 0xFF, 0xFF, 0x24, 0x24, + 0x00, 0x00, 0x00, 0x00, + }, + { /* Init_SRA0_SRAF */ + 0x00, 0xFF, 0xBF, 0xFF, 0xFF, 0xED, 0xED, 0xED, + 0x7B, 0xFF, 0xFF, 0xFF, 0xBF, 0xEF, 0xBF, 0xDF, + }, + { /* Init_GR00_GR08 */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x05, 0x0F, + 0xFF, + }, + { /* Init_AR00_AR14 */ + 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, + 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F, + 0x41, 0x00, 0x0F, 0x00, 0x00, + }, + { /* Init_CR00_CR18 */ + 0x7F, 0x63, 0x63, 0x00, 0x68, 0x18, 0x72, 0xF0, + 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x58, 0x0C, 0x57, 0x64, 0x40, 0x57, 0x00, 0xE3, + 0xFF, + }, + { /* Init_CR30_CR4D */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x33, 0x03, 0x20, + 0x00, 0x00, 0x00, 0x40, 0x00, 0xE7, 0xBF, 0xFD, + 0x7F, 0x63, 0x00, 0x69, 0x18, 0x72, 0x57, 0x00, + 0x58, 0x0C, 0xE0, 0x20, 0x63, 0x57, + }, + { /* Init_CR90_CRA7 */ + 0x56, 0x4B, 0x5E, 0x55, 0x86, 0x9D, 0x8E, 0xAA, + 0xDB, 0x2A, 0xDF, 0x33, 0x00, 0x00, 0x18, 0x00, + 0x20, 0x1F, 0x1A, 0x19, 0x0F, 0x0F, 0x0F, 0x00, + }, + }, + { /* mode#3: 800 x 600 24Bpp 60Hz */ + 800, 600, 24, 60, + 0x2B, + { /* Init_SR0_SR4 */ + 0x03, 0x01, 0x0F, 0x03, 0x0E, + }, + { /* Init_SR10_SR24 */ + 0xFF, 0xBE, 0xEE, 0xFF, 0x00, 0x0E, 0x17, 0x2C, + 0x99, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0xC4, 0x30, 0x02, 0x01, 0x01, + }, + { /* Init_SR30_SR75 */ + 0x36, 0x03, 0x20, 0x09, 0xC0, 0x36, 0x36, 0x36, + 0x36, 0x36, 0x36, 0x36, 0x00, 0x00, 0x03, 0xFF, + 0x00, 0xFC, 0x00, 0x00, 0x20, 0x18, 0x00, 0xFC, + 0x20, 0x0C, 0x44, 0x20, 0x00, 0x36, 0x36, 0x36, + 0x04, 0x48, 0x83, 0x63, 0x68, 0x72, 0x57, 0x58, + 0x04, 0x55, 0x59, 0x36, 0x36, 0x00, 0x00, 0x36, + 0x01, 0x80, 0x7E, 0x1A, 0x1A, 0x00, 0x00, 0x00, + 0x50, 0x03, 0x74, 0x14, 0x1C, 0x85, 0x35, 0x13, + 0x02, 0x45, 0x30, 0x30, 0x40, 0x20, + }, + { /* Init_SR80_SR93 */ + 0xFF, 0x07, 0x00, 0x6F, 0x7F, 0x7F, 0xFF, 0x36, + 0xF7, 0x00, 0x00, 0x00, 0xEF, 0xFF, 0x36, 0x36, + 0x00, 0x00, 0x00, 0x00, + }, + { /* Init_SRA0_SRAF */ + 0x00, 0xFF, 0xBF, 0xFF, 0xFF, 0xED, 0xED, 0xED, + 0x7B, 0xFF, 0xFF, 0xFF, 0xBF, 0xEF, 0xBF, 0xDF, + }, + { /* Init_GR00_GR08 */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x05, 0x0F, + 0xFF, + }, + { /* Init_AR00_AR14 */ + 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, + 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F, + 0x41, 0x00, 0x0F, 0x00, 0x00, + }, + { /* Init_CR00_CR18 */ + 0x7F, 0x63, 0x63, 0x00, 0x68, 0x18, 0x72, 0xF0, + 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x58, 0x0C, 0x57, 0x64, 0x40, 0x57, 0x00, 0xE3, + 0xFF, + }, + { /* Init_CR30_CR4D */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x33, 0x03, 0x20, + 0x00, 0x00, 0x00, 0x40, 0x00, 0xE7, 0xBF, 0xFD, + 0x7F, 0x63, 0x00, 0x69, 0x18, 0x72, 0x57, 0x00, + 0x58, 0x0C, 0xE0, 0x20, 0x63, 0x57, + }, + { /* Init_CR90_CRA7 */ + 0x56, 0x4B, 0x5E, 0x55, 0x86, 0x9D, 0x8E, 0xAA, + 0xDB, 0x2A, 0xDF, 0x33, 0x00, 0x00, 0x18, 0x00, + 0x20, 0x1F, 0x1A, 0x19, 0x0F, 0x0F, 0x0F, 0x00, + }, + }, + { /* mode#7: 800 x 600 32Bpp 60Hz */ + 800, 600, 32, 60, + /* Init_MISC */ + 0x2B, + { /* Init_SR0_SR4 */ + 0x03, 0x01, 0x0F, 0x03, 0x0E, + }, + { /* Init_SR10_SR24 */ + 0xFF, 0xBE, 0xEE, 0xFF, 0x00, 0x0E, 0x17, 0x2C, + 0x99, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, + 0xC4, 0x30, 0x02, 0x01, 0x01, + }, + { /* Init_SR30_SR75 */ + 0x34, 0x03, 0x20, 0x09, 0xC0, 0x24, 0x24, 0x24, + 0x24, 0x24, 0x24, 0x24, 0x00, 0x00, 0x03, 0xFF, + 0x00, 0xFC, 0x00, 0x00, 0x20, 0x38, 0x00, 0xFC, + 0x20, 0x0C, 0x44, 0x20, 0x00, 0x24, 0x24, 0x24, + 0x04, 0x48, 0x83, 0x63, 0x68, 0x72, 0x57, 0x58, + 0x04, 0x55, 0x59, 0x24, 0x24, 0x00, 0x00, 0x24, + 0x01, 0x80, 0x7A, 0x1A, 0x1A, 0x00, 0x00, 0x00, + 0x50, 0x03, 0x74, 0x14, 0x1C, 0x85, 0x35, 0x13, + 0x02, 0x45, 0x30, 0x35, 0x40, 0x20, + }, + { /* Init_SR80_SR93 */ + 0x00, 0x00, 0x00, 0x6F, 0x7F, 0x7F, 0xFF, 0x24, + 0x00, 0x00, 0x00, 0x00, 0xFF, 0xFF, 0x24, 0x24, + 0x00, 0x00, 0x00, 0x00, + }, + { /* Init_SRA0_SRAF */ + 0x00, 0xFF, 0xBF, 0xFF, 0xFF, 0xED, 0xED, 0xED, + 0x7B, 0xFF, 0xFF, 0xFF, 0xBF, 0xEF, 0xBF, 0xDF, + }, + { /* Init_GR00_GR08 */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x05, 0x0F, + 0xFF, + }, + { /* Init_AR00_AR14 */ + 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, + 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F, + 0x41, 0x00, 0x0F, 0x00, 0x00, + }, + { /* Init_CR00_CR18 */ + 0x7F, 0x63, 0x63, 0x00, 0x68, 0x18, 0x72, 0xF0, + 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x58, 0x0C, 0x57, 0x64, 0x40, 0x57, 0x00, 0xE3, + 0xFF, + }, + { /* Init_CR30_CR4D */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x33, 0x03, 0x20, + 0x00, 0x00, 0x00, 0x40, 0x00, 0xE7, 0xBF, 0xFD, + 0x7F, 0x63, 0x00, 0x69, 0x18, 0x72, 0x57, 0x00, + 0x58, 0x0C, 0xE0, 0x20, 0x63, 0x57, + }, + { /* Init_CR90_CRA7 */ + 0x56, 0x4B, 0x5E, 0x55, 0x86, 0x9D, 0x8E, 0xAA, + 0xDB, 0x2A, 0xDF, 0x33, 0x00, 0x00, 0x18, 0x00, + 0x20, 0x1F, 0x1A, 0x19, 0x0F, 0x0F, 0x0F, 0x00, + }, + }, + /* We use 1024x768 table to light 1024x600 panel for lemote */ + { /* mode#4: 1024 x 600 16Bpp 60Hz */ + 1024, 600, 16, 60, + /* Init_MISC */ + 0xEB, + { /* Init_SR0_SR4 */ + 0x03, 0x01, 0x0F, 0x00, 0x0E, + }, + { /* Init_SR10_SR24 */ + 0xC8, 0x40, 0x14, 0x60, 0x00, 0x0A, 0x17, 0x20, + 0x51, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, + 0xC4, 0x30, 0x02, 0x00, 0x01, + }, + { /* Init_SR30_SR75 */ + 0x22, 0x03, 0x24, 0x09, 0xC0, 0x22, 0x22, 0x22, + 0x22, 0x22, 0x22, 0x22, 0x00, 0x00, 0x03, 0xFF, + 0x00, 0xFC, 0x00, 0x00, 0x20, 0x18, 0x00, 0xFC, + 0x20, 0x0C, 0x44, 0x20, 0x00, 0x22, 0x22, 0x22, + 0x06, 0x68, 0xA7, 0x7F, 0x83, 0x24, 0xFF, 0x03, + 0x00, 0x60, 0x59, 0x22, 0x22, 0x00, 0x00, 0x22, + 0x01, 0x80, 0x7A, 0x1A, 0x1A, 0x00, 0x00, 0x00, + 0x50, 0x03, 0x16, 0x02, 0x0D, 0x82, 0x09, 0x02, + 0x04, 0x45, 0x3F, 0x30, 0x40, 0x20, + }, + { /* Init_SR80_SR93 */ + 0xFF, 0x07, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0x3A, + 0xF7, 0x00, 0x00, 0x00, 0xFF, 0xFF, 0x3A, 0x3A, + 0x00, 0x00, 0x00, 0x00, + }, + { /* Init_SRA0_SRAF */ + 0x00, 0xFB, 0x9F, 0x01, 0x00, 0xED, 0xED, 0xED, + 0x7B, 0xFB, 0xFF, 0xFF, 0x97, 0xEF, 0xBF, 0xDF, + }, + { /* Init_GR00_GR08 */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x05, 0x0F, + 0xFF, + }, + { /* Init_AR00_AR14 */ + 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, + 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F, + 0x41, 0x00, 0x0F, 0x00, 0x00, + }, + { /* Init_CR00_CR18 */ + 0xA3, 0x7F, 0x7F, 0x00, 0x85, 0x16, 0x24, 0xF5, + 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x03, 0x09, 0xFF, 0x80, 0x40, 0xFF, 0x00, 0xE3, + 0xFF, + }, + { /* Init_CR30_CR4D */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x02, 0x20, + 0x00, 0x00, 0x00, 0x40, 0x00, 0xFF, 0xBF, 0xFF, + 0xA3, 0x7F, 0x00, 0x82, 0x0b, 0x6f, 0x57, 0x00, + 0x5c, 0x0f, 0xE0, 0xe0, 0x7F, 0x57, + }, + { /* Init_CR90_CRA7 */ + 0x55, 0xD9, 0x5D, 0xE1, 0x86, 0x1B, 0x8E, 0x26, + 0xDA, 0x8D, 0xDE, 0x94, 0x00, 0x00, 0x18, 0x00, + 0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x15, 0x03, + }, + }, + { /* mode#5: 1024 x 768 24Bpp 60Hz */ + 1024, 768, 24, 60, + /* Init_MISC */ + 0xEB, + { /* Init_SR0_SR4 */ + 0x03, 0x01, 0x0F, 0x03, 0x0E, + }, + { /* Init_SR10_SR24 */ + 0xF3, 0xB6, 0xC0, 0xDD, 0x00, 0x0E, 0x17, 0x2C, + 0x99, 0x02, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, + 0xC4, 0x30, 0x02, 0x01, 0x01, + }, + { /* Init_SR30_SR75 */ + 0x38, 0x03, 0x20, 0x09, 0xC0, 0x3A, 0x3A, 0x3A, + 0x3A, 0x3A, 0x3A, 0x3A, 0x00, 0x00, 0x03, 0xFF, + 0x00, 0xFC, 0x00, 0x00, 0x20, 0x18, 0x00, 0xFC, + 0x20, 0x0C, 0x44, 0x20, 0x00, 0x00, 0x00, 0x3A, + 0x06, 0x68, 0xA7, 0x7F, 0x83, 0x24, 0xFF, 0x03, + 0x00, 0x60, 0x59, 0x3A, 0x3A, 0x00, 0x00, 0x3A, + 0x01, 0x80, 0x7E, 0x1A, 0x1A, 0x00, 0x00, 0x00, + 0x50, 0x03, 0x74, 0x14, 0x3B, 0x0D, 0x09, 0x02, + 0x04, 0x45, 0x30, 0x30, 0x40, 0x20, + }, + { /* Init_SR80_SR93 */ + 0xFF, 0x07, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0x3A, + 0xF7, 0x00, 0x00, 0x00, 0xFF, 0xFF, 0x3A, 0x3A, + 0x00, 0x00, 0x00, 0x00, + }, + { /* Init_SRA0_SRAF */ + 0x00, 0xFB, 0x9F, 0x01, 0x00, 0xED, 0xED, 0xED, + 0x7B, 0xFB, 0xFF, 0xFF, 0x97, 0xEF, 0xBF, 0xDF, + }, + { /* Init_GR00_GR08 */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x05, 0x0F, + 0xFF, + }, + { /* Init_AR00_AR14 */ + 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, + 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F, + 0x41, 0x00, 0x0F, 0x00, 0x00, + }, + { /* Init_CR00_CR18 */ + 0xA3, 0x7F, 0x7F, 0x00, 0x85, 0x16, 0x24, 0xF5, + 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x03, 0x09, 0xFF, 0x80, 0x40, 0xFF, 0x00, 0xE3, + 0xFF, + }, + { /* Init_CR30_CR4D */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x02, 0x20, + 0x00, 0x00, 0x00, 0x40, 0x00, 0xFF, 0xBF, 0xFF, + 0xA3, 0x7F, 0x00, 0x86, 0x15, 0x24, 0xFF, 0x00, + 0x01, 0x07, 0xE5, 0x20, 0x7F, 0xFF, + }, + { /* Init_CR90_CRA7 */ + 0x55, 0xD9, 0x5D, 0xE1, 0x86, 0x1B, 0x8E, 0x26, + 0xDA, 0x8D, 0xDE, 0x94, 0x00, 0x00, 0x18, 0x00, + 0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x15, 0x03, + }, + }, + { /* mode#4: 1024 x 768 32Bpp 60Hz */ + 1024, 768, 32, 60, + /* Init_MISC */ + 0xEB, + { /* Init_SR0_SR4 */ + 0x03, 0x01, 0x0F, 0x03, 0x0E, + }, + { /* Init_SR10_SR24 */ + 0xF3, 0xB6, 0xC0, 0xDD, 0x00, 0x0E, 0x17, 0x2C, + 0x99, 0x02, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, + 0xC4, 0x32, 0x02, 0x01, 0x01, + }, + { /* Init_SR30_SR75 */ + 0x38, 0x03, 0x20, 0x09, 0xC0, 0x3A, 0x3A, 0x3A, + 0x3A, 0x3A, 0x3A, 0x3A, 0x00, 0x00, 0x03, 0xFF, + 0x00, 0xFC, 0x00, 0x00, 0x20, 0x18, 0x00, 0xFC, + 0x20, 0x0C, 0x44, 0x20, 0x00, 0x00, 0x00, 0x3A, + 0x06, 0x68, 0xA7, 0x7F, 0x83, 0x24, 0xFF, 0x03, + 0x00, 0x60, 0x59, 0x3A, 0x3A, 0x00, 0x00, 0x3A, + 0x01, 0x80, 0x7E, 0x1A, 0x1A, 0x00, 0x00, 0x00, + 0x50, 0x03, 0x74, 0x14, 0x3B, 0x0D, 0x09, 0x02, + 0x04, 0x45, 0x30, 0x30, 0x40, 0x20, + }, + { /* Init_SR80_SR93 */ + 0xFF, 0x07, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0x3A, + 0xF7, 0x00, 0x00, 0x00, 0xFF, 0xFF, 0x3A, 0x3A, + 0x00, 0x00, 0x00, 0x00, + }, + { /* Init_SRA0_SRAF */ + 0x00, 0xFB, 0x9F, 0x01, 0x00, 0xED, 0xED, 0xED, + 0x7B, 0xFB, 0xFF, 0xFF, 0x97, 0xEF, 0xBF, 0xDF, + }, + { /* Init_GR00_GR08 */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x05, 0x0F, + 0xFF, + }, + { /* Init_AR00_AR14 */ + 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, + 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F, + 0x41, 0x00, 0x0F, 0x00, 0x00, + }, + { /* Init_CR00_CR18 */ + 0xA3, 0x7F, 0x7F, 0x00, 0x85, 0x16, 0x24, 0xF5, + 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x03, 0x09, 0xFF, 0x80, 0x40, 0xFF, 0x00, 0xE3, + 0xFF, + }, + { /* Init_CR30_CR4D */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x02, 0x20, + 0x00, 0x00, 0x00, 0x40, 0x00, 0xFF, 0xBF, 0xFF, + 0xA3, 0x7F, 0x00, 0x86, 0x15, 0x24, 0xFF, 0x00, + 0x01, 0x07, 0xE5, 0x20, 0x7F, 0xFF, + }, + { /* Init_CR90_CRA7 */ + 0x55, 0xD9, 0x5D, 0xE1, 0x86, 0x1B, 0x8E, 0x26, + 0xDA, 0x8D, 0xDE, 0x94, 0x00, 0x00, 0x18, 0x00, + 0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x15, 0x03, + }, + }, + { /* mode#6: 320 x 240 16Bpp 60Hz */ + 320, 240, 16, 60, + /* Init_MISC */ + 0xEB, + { /* Init_SR0_SR4 */ + 0x03, 0x01, 0x0F, 0x03, 0x0E, + }, + { /* Init_SR10_SR24 */ + 0xF3, 0xB6, 0xC0, 0xDD, 0x00, 0x0E, 0x17, 0x2C, + 0x99, 0x02, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, + 0xC4, 0x32, 0x02, 0x01, 0x01, + }, + { /* Init_SR30_SR75 */ + 0x38, 0x03, 0x20, 0x09, 0xC0, 0x3A, 0x3A, 0x3A, + 0x3A, 0x3A, 0x3A, 0x3A, 0x00, 0x00, 0x03, 0xFF, + 0x00, 0xFC, 0x00, 0x00, 0x20, 0x18, 0x00, 0xFC, + 0x20, 0x0C, 0x44, 0x20, 0x00, 0x00, 0x00, 0x3A, + 0x06, 0x68, 0xA7, 0x7F, 0x83, 0x24, 0xFF, 0x03, + 0x00, 0x60, 0x59, 0x3A, 0x3A, 0x00, 0x00, 0x3A, + 0x01, 0x80, 0x7E, 0x1A, 0x1A, 0x00, 0x00, 0x00, + 0x50, 0x03, 0x74, 0x14, 0x08, 0x43, 0x08, 0x43, + 0x04, 0x45, 0x30, 0x30, 0x40, 0x20, + }, + { /* Init_SR80_SR93 */ + 0xFF, 0x07, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0x3A, + 0xF7, 0x00, 0x00, 0x00, 0xFF, 0xFF, 0x3A, 0x3A, + 0x00, 0x00, 0x00, 0x00, + }, + { /* Init_SRA0_SRAF */ + 0x00, 0xFB, 0x9F, 0x01, 0x00, 0xED, 0xED, 0xED, + 0x7B, 0xFB, 0xFF, 0xFF, 0x97, 0xEF, 0xBF, 0xDF, + }, + { /* Init_GR00_GR08 */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x05, 0x0F, + 0xFF, + }, + { /* Init_AR00_AR14 */ + 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, + 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F, + 0x41, 0x00, 0x0F, 0x00, 0x00, + }, + { /* Init_CR00_CR18 */ + 0xA3, 0x7F, 0x7F, 0x00, 0x85, 0x16, 0x24, 0xF5, + 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x03, 0x09, 0xFF, 0x80, 0x40, 0xFF, 0x00, 0xE3, + 0xFF, + }, + { /* Init_CR30_CR4D */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x02, 0x20, + 0x00, 0x00, 0x30, 0x40, 0x00, 0xFF, 0xBF, 0xFF, + 0x2E, 0x27, 0x00, 0x2b, 0x0c, 0x0F, 0xEF, 0x00, + 0xFe, 0x0f, 0x01, 0xC0, 0x27, 0xEF, + }, + { /* Init_CR90_CRA7 */ + 0x55, 0xD9, 0x5D, 0xE1, 0x86, 0x1B, 0x8E, 0x26, + 0xDA, 0x8D, 0xDE, 0x94, 0x00, 0x00, 0x18, 0x00, + 0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x15, 0x03, + }, + }, + + { /* mode#8: 320 x 240 32Bpp 60Hz */ + 320, 240, 32, 60, + /* Init_MISC */ + 0xEB, + { /* Init_SR0_SR4 */ + 0x03, 0x01, 0x0F, 0x03, 0x0E, + }, + { /* Init_SR10_SR24 */ + 0xF3, 0xB6, 0xC0, 0xDD, 0x00, 0x0E, 0x17, 0x2C, + 0x99, 0x02, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, + 0xC4, 0x32, 0x02, 0x01, 0x01, + }, + { /* Init_SR30_SR75 */ + 0x38, 0x03, 0x20, 0x09, 0xC0, 0x3A, 0x3A, 0x3A, + 0x3A, 0x3A, 0x3A, 0x3A, 0x00, 0x00, 0x03, 0xFF, + 0x00, 0xFC, 0x00, 0x00, 0x20, 0x18, 0x00, 0xFC, + 0x20, 0x0C, 0x44, 0x20, 0x00, 0x00, 0x00, 0x3A, + 0x06, 0x68, 0xA7, 0x7F, 0x83, 0x24, 0xFF, 0x03, + 0x00, 0x60, 0x59, 0x3A, 0x3A, 0x00, 0x00, 0x3A, + 0x01, 0x80, 0x7E, 0x1A, 0x1A, 0x00, 0x00, 0x00, + 0x50, 0x03, 0x74, 0x14, 0x08, 0x43, 0x08, 0x43, + 0x04, 0x45, 0x30, 0x30, 0x40, 0x20, + }, + { /* Init_SR80_SR93 */ + 0xFF, 0x07, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0x3A, + 0xF7, 0x00, 0x00, 0x00, 0xFF, 0xFF, 0x3A, 0x3A, + 0x00, 0x00, 0x00, 0x00, + }, + { /* Init_SRA0_SRAF */ + 0x00, 0xFB, 0x9F, 0x01, 0x00, 0xED, 0xED, 0xED, + 0x7B, 0xFB, 0xFF, 0xFF, 0x97, 0xEF, 0xBF, 0xDF, + }, + { /* Init_GR00_GR08 */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x05, 0x0F, + 0xFF, + }, + { /* Init_AR00_AR14 */ + 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, + 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F, + 0x41, 0x00, 0x0F, 0x00, 0x00, + }, + { /* Init_CR00_CR18 */ + 0xA3, 0x7F, 0x7F, 0x00, 0x85, 0x16, 0x24, 0xF5, + 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x03, 0x09, 0xFF, 0x80, 0x40, 0xFF, 0x00, 0xE3, + 0xFF, + }, + { /* Init_CR30_CR4D */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x02, 0x20, + 0x00, 0x00, 0x30, 0x40, 0x00, 0xFF, 0xBF, 0xFF, + 0x2E, 0x27, 0x00, 0x2b, 0x0c, 0x0F, 0xEF, 0x00, + 0xFe, 0x0f, 0x01, 0xC0, 0x27, 0xEF, + }, + { /* Init_CR90_CRA7 */ + 0x55, 0xD9, 0x5D, 0xE1, 0x86, 0x1B, 0x8E, 0x26, + 0xDA, 0x8D, 0xDE, 0x94, 0x00, 0x00, 0x18, 0x00, + 0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x15, 0x03, + }, + }, +}; + +#define numVGAModes (sizeof(VGAMode) / sizeof(struct ModeInit)) diff --git a/drivers/staging/vt6655/Kconfig b/drivers/staging/vt6655/Kconfig index 825bbc4fc3fa..061e730df2d0 100644 --- a/drivers/staging/vt6655/Kconfig +++ b/drivers/staging/vt6655/Kconfig @@ -1,6 +1,6 @@ config VT6655 tristate "VIA Technologies VT6655 support" - depends on PCI + depends on PCI && WLAN select WIRELESS_EXT select WEXT_PRIV ---help--- diff --git a/drivers/staging/vt6656/Kconfig b/drivers/staging/vt6656/Kconfig index 87bcd269310c..1055b526c532 100644 --- a/drivers/staging/vt6656/Kconfig +++ b/drivers/staging/vt6656/Kconfig @@ -1,6 +1,6 @@ config VT6656 tristate "VIA Technologies VT6656 support" - depends on USB + depends on USB && WLAN select WIRELESS_EXT select WEXT_PRIV ---help--- diff --git a/drivers/staging/wlan-ng/prism2fw.c b/drivers/staging/wlan-ng/prism2fw.c index 7d76a7f92a33..aaa70ed57710 100644 --- a/drivers/staging/wlan-ng/prism2fw.c +++ b/drivers/staging/wlan-ng/prism2fw.c @@ -439,7 +439,7 @@ void free_chunks(imgchunk_t *fchunk, unsigned int *nfchunks) } } *nfchunks = 0; - memset(fchunk, 0, sizeof(fchunk)); + memset(fchunk, 0, sizeof(*fchunk)); } diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile index 473aa1a20de9..be3c9b80bc9f 100644 --- a/drivers/usb/Makefile +++ b/drivers/usb/Makefile @@ -44,5 +44,3 @@ obj-y += early/ obj-$(CONFIG_USB_ATM) += atm/ obj-$(CONFIG_USB_SPEEDTOUCH) += atm/ - -obj-$(CONFIG_USB_ULPI) += otg/ diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 6dac3b802d41..0495fa651225 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -1597,7 +1597,9 @@ rescan: } /** - * Check whether a new bandwidth setting exceeds the bus bandwidth. + * usb_hcd_alloc_bandwidth - check whether a new bandwidth setting exceeds + * the bus bandwidth + * @udev: target &usb_device * @new_config: new configuration to install * @cur_alt: the current alternate interface setting * @new_alt: alternate interface setting that is being installed diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 06af970e1064..0cec6caf6e9b 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1658,12 +1658,12 @@ static inline void announce_device(struct usb_device *udev) { } #endif /** - * usb_configure_device_otg - FIXME (usbcore-internal) + * usb_enumerate_device_otg - FIXME (usbcore-internal) * @udev: newly addressed device (in ADDRESS state) * - * Do configuration for On-The-Go devices + * Finish enumeration for On-The-Go devices */ -static int usb_configure_device_otg(struct usb_device *udev) +static int usb_enumerate_device_otg(struct usb_device *udev) { int err = 0; @@ -1734,7 +1734,7 @@ fail: /** - * usb_configure_device - Detect and probe device intfs/otg (usbcore-internal) + * usb_enumerate_device - Read device configs/intfs/otg (usbcore-internal) * @udev: newly addressed device (in ADDRESS state) * * This is only called by usb_new_device() and usb_authorize_device() @@ -1745,7 +1745,7 @@ fail: * the string descriptors, as they will be errored out by the device * until it has been authorized. */ -static int usb_configure_device(struct usb_device *udev) +static int usb_enumerate_device(struct usb_device *udev) { int err; @@ -1769,7 +1769,7 @@ static int usb_configure_device(struct usb_device *udev) udev->descriptor.iManufacturer); udev->serial = usb_cache_string(udev, udev->descriptor.iSerialNumber); } - err = usb_configure_device_otg(udev); + err = usb_enumerate_device_otg(udev); fail: return err; } @@ -1779,8 +1779,8 @@ fail: * usb_new_device - perform initial device setup (usbcore-internal) * @udev: newly addressed device (in ADDRESS state) * - * This is called with devices which have been enumerated, but not yet - * configured. The device descriptor is available, but not descriptors + * This is called with devices which have been detected but not fully + * enumerated. The device descriptor is available, but not descriptors * for any device configuration. The caller must have locked either * the parent hub (if udev is a normal device) or else the * usb_bus_list_lock (if udev is a root hub). The parent's pointer to @@ -1803,8 +1803,8 @@ int usb_new_device(struct usb_device *udev) if (udev->parent) usb_autoresume_device(udev->parent); - usb_detect_quirks(udev); /* Determine quirks */ - err = usb_configure_device(udev); /* detect & probe dev/intfs */ + usb_detect_quirks(udev); + err = usb_enumerate_device(udev); /* Read descriptors */ if (err < 0) goto fail; dev_dbg(&udev->dev, "udev %d, busnum %d, minor = %d\n", @@ -1849,21 +1849,23 @@ fail: */ int usb_deauthorize_device(struct usb_device *usb_dev) { - unsigned cnt; usb_lock_device(usb_dev); if (usb_dev->authorized == 0) goto out_unauthorized; + usb_dev->authorized = 0; usb_set_configuration(usb_dev, -1); + + kfree(usb_dev->product); usb_dev->product = kstrdup("n/a (unauthorized)", GFP_KERNEL); + kfree(usb_dev->manufacturer); usb_dev->manufacturer = kstrdup("n/a (unauthorized)", GFP_KERNEL); + kfree(usb_dev->serial); usb_dev->serial = kstrdup("n/a (unauthorized)", GFP_KERNEL); - kfree(usb_dev->config); - usb_dev->config = NULL; - for (cnt = 0; cnt < usb_dev->descriptor.bNumConfigurations; cnt++) - kfree(usb_dev->rawdescriptors[cnt]); + + usb_destroy_configuration(usb_dev); usb_dev->descriptor.bNumConfigurations = 0; - kfree(usb_dev->rawdescriptors); + out_unauthorized: usb_unlock_device(usb_dev); return 0; @@ -1873,15 +1875,11 @@ out_unauthorized: int usb_authorize_device(struct usb_device *usb_dev) { int result = 0, c; + usb_lock_device(usb_dev); if (usb_dev->authorized == 1) goto out_authorized; - kfree(usb_dev->product); - usb_dev->product = NULL; - kfree(usb_dev->manufacturer); - usb_dev->manufacturer = NULL; - kfree(usb_dev->serial); - usb_dev->serial = NULL; + result = usb_autoresume_device(usb_dev); if (result < 0) { dev_err(&usb_dev->dev, @@ -1894,10 +1892,18 @@ int usb_authorize_device(struct usb_device *usb_dev) "authorization: %d\n", result); goto error_device_descriptor; } + + kfree(usb_dev->product); + usb_dev->product = NULL; + kfree(usb_dev->manufacturer); + usb_dev->manufacturer = NULL; + kfree(usb_dev->serial); + usb_dev->serial = NULL; + usb_dev->authorized = 1; - result = usb_configure_device(usb_dev); + result = usb_enumerate_device(usb_dev); if (result < 0) - goto error_configure; + goto error_enumerate; /* Choose and set the configuration. This registers the interfaces * with the driver core and lets interface drivers bind to them. */ @@ -1912,8 +1918,10 @@ int usb_authorize_device(struct usb_device *usb_dev) } } dev_info(&usb_dev->dev, "authorized to connect\n"); -error_configure: + +error_enumerate: error_device_descriptor: + usb_autosuspend_device(usb_dev); error_autoresume: out_authorized: usb_unlock_device(usb_dev); // complements locktree diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c index 15477008b631..485edf937f25 100644 --- a/drivers/usb/core/sysfs.c +++ b/drivers/usb/core/sysfs.c @@ -82,9 +82,13 @@ static ssize_t show_##name(struct device *dev, \ struct device_attribute *attr, char *buf) \ { \ struct usb_device *udev; \ + int retval; \ \ udev = to_usb_device(dev); \ - return sprintf(buf, "%s\n", udev->name); \ + usb_lock_device(udev); \ + retval = sprintf(buf, "%s\n", udev->name); \ + usb_unlock_device(udev); \ + return retval; \ } \ static DEVICE_ATTR(name, S_IRUGO, show_##name, NULL); diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c index 2fb42043b305..0daff0d968ba 100644 --- a/drivers/usb/core/usb.c +++ b/drivers/usb/core/usb.c @@ -66,9 +66,9 @@ MODULE_PARM_DESC(autosuspend, "default autosuspend delay"); /** * usb_find_alt_setting() - Given a configuration, find the alternate setting * for the given interface. - * @config - the configuration to search (not necessarily the current config). - * @iface_num - interface number to search in - * @alt_num - alternate interface setting number to search for. + * @config: the configuration to search (not necessarily the current config). + * @iface_num: interface number to search in + * @alt_num: alternate interface setting number to search for. * * Search the configuration's interface cache for the given alt setting. */ diff --git a/drivers/usb/early/ehci-dbgp.c b/drivers/usb/early/ehci-dbgp.c index 1206a26ef893..2958a1271b20 100644 --- a/drivers/usb/early/ehci-dbgp.c +++ b/drivers/usb/early/ehci-dbgp.c @@ -613,7 +613,7 @@ err: } EXPORT_SYMBOL_GPL(dbgp_external_startup); -static int __init ehci_reset_port(int port) +static int ehci_reset_port(int port) { u32 portsc; u32 delay_time, delay; diff --git a/drivers/usb/gadget/audio.c b/drivers/usb/gadget/audio.c index 58f220323847..a62af7b59094 100644 --- a/drivers/usb/gadget/audio.c +++ b/drivers/usb/gadget/audio.c @@ -158,6 +158,7 @@ fail: static int __exit audio_unbind(struct usb_composite_dev *cdev) { + gaudio_cleanup(); return 0; } diff --git a/drivers/usb/gadget/f_audio.c b/drivers/usb/gadget/f_audio.c index c43c89ffa2c8..df77f6131c73 100644 --- a/drivers/usb/gadget/f_audio.c +++ b/drivers/usb/gadget/f_audio.c @@ -56,13 +56,16 @@ static struct usb_interface_descriptor ac_interface_desc __initdata = { DECLARE_UAC_AC_HEADER_DESCRIPTOR(2); #define UAC_DT_AC_HEADER_LENGTH UAC_DT_AC_HEADER_SIZE(F_AUDIO_NUM_INTERFACES) +/* 1 input terminal, 1 output terminal and 1 feature unit */ +#define UAC_DT_TOTAL_LENGTH (UAC_DT_AC_HEADER_LENGTH + UAC_DT_INPUT_TERMINAL_SIZE \ + + UAC_DT_OUTPUT_TERMINAL_SIZE + UAC_DT_FEATURE_UNIT_SIZE(0)) /* B.3.2 Class-Specific AC Interface Descriptor */ static struct uac_ac_header_descriptor_2 ac_header_desc = { .bLength = UAC_DT_AC_HEADER_LENGTH, .bDescriptorType = USB_DT_CS_INTERFACE, .bDescriptorSubtype = UAC_HEADER, .bcdADC = __constant_cpu_to_le16(0x0100), - .wTotalLength = __constant_cpu_to_le16(UAC_DT_AC_HEADER_LENGTH), + .wTotalLength = __constant_cpu_to_le16(UAC_DT_TOTAL_LENGTH), .bInCollection = F_AUDIO_NUM_INTERFACES, .baInterfaceNr = { [0] = F_AUDIO_AC_INTERFACE, @@ -252,12 +255,12 @@ static struct f_audio_buf *f_audio_buffer_alloc(int buf_size) copy_buf = kzalloc(sizeof *copy_buf, GFP_ATOMIC); if (!copy_buf) - return (struct f_audio_buf *)-ENOMEM; + return ERR_PTR(-ENOMEM); copy_buf->buf = kzalloc(buf_size, GFP_ATOMIC); if (!copy_buf->buf) { kfree(copy_buf); - return (struct f_audio_buf *)-ENOMEM; + return ERR_PTR(-ENOMEM); } return copy_buf; @@ -332,7 +335,7 @@ static int f_audio_out_ep_complete(struct usb_ep *ep, struct usb_request *req) list_add_tail(©_buf->list, &audio->play_queue); schedule_work(&audio->playback_work); copy_buf = f_audio_buffer_alloc(audio_buf_size); - if (copy_buf < 0) + if (IS_ERR(copy_buf)) return -ENOMEM; } @@ -576,6 +579,8 @@ static int f_audio_set_alt(struct usb_function *f, unsigned intf, unsigned alt) usb_ep_enable(out_ep, audio->out_desc); out_ep->driver_data = audio; audio->copy_buf = f_audio_buffer_alloc(audio_buf_size); + if (IS_ERR(audio->copy_buf)) + return -ENOMEM; /* * allocate a bunch of read buffers @@ -787,7 +792,7 @@ int __init audio_bind_config(struct usb_configuration *c) return status; add_fail: - gaudio_cleanup(&audio->card); + gaudio_cleanup(); setup_fail: kfree(audio); return status; diff --git a/drivers/usb/gadget/u_audio.c b/drivers/usb/gadget/u_audio.c index 8252595d619d..35e0930f5bbb 100644 --- a/drivers/usb/gadget/u_audio.c +++ b/drivers/usb/gadget/u_audio.c @@ -288,6 +288,7 @@ static int gaudio_close_snd_dev(struct gaudio *gau) return 0; } +static struct gaudio *the_card; /** * gaudio_setup - setup ALSA interface and preparing for USB transfer * @@ -303,6 +304,9 @@ int __init gaudio_setup(struct gaudio *card) if (ret) ERROR(card, "we need at least one control device\n"); + if (!the_card) + the_card = card; + return ret; } @@ -312,9 +316,11 @@ int __init gaudio_setup(struct gaudio *card) * * This is called to free all resources allocated by @gaudio_setup(). */ -void gaudio_cleanup(struct gaudio *card) +void gaudio_cleanup(void) { - if (card) - gaudio_close_snd_dev(card); + if (the_card) { + gaudio_close_snd_dev(the_card); + the_card = NULL; + } } diff --git a/drivers/usb/gadget/u_audio.h b/drivers/usb/gadget/u_audio.h index cc8d159c648a..08ffce3298e6 100644 --- a/drivers/usb/gadget/u_audio.h +++ b/drivers/usb/gadget/u_audio.h @@ -51,6 +51,6 @@ struct gaudio { }; int gaudio_setup(struct gaudio *card); -void gaudio_cleanup(struct gaudio *card); +void gaudio_cleanup(void); #endif /* __U_AUDIO_H */ diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c index 12f1ad2fd0e8..74d07f4e8b7d 100644 --- a/drivers/usb/host/ehci-omap.c +++ b/drivers/usb/host/ehci-omap.c @@ -37,7 +37,7 @@ #include <linux/platform_device.h> #include <linux/clk.h> #include <linux/gpio.h> -#include <mach/usb.h> +#include <plat/usb.h> /* * OMAP USBHOST Register addresses: VIRTUAL ADDRESSES diff --git a/drivers/usb/host/fhci-sched.c b/drivers/usb/host/fhci-sched.c index 00a29855d0c4..ff43747a614f 100644 --- a/drivers/usb/host/fhci-sched.c +++ b/drivers/usb/host/fhci-sched.c @@ -37,7 +37,7 @@ static void recycle_frame(struct fhci_usb *usb, struct packet *pkt) pkt->info = 0; pkt->priv_data = NULL; - cq_put(usb->ep0->empty_frame_Q, pkt); + cq_put(&usb->ep0->empty_frame_Q, pkt); } /* confirm submitted packet */ @@ -57,7 +57,7 @@ void fhci_transaction_confirm(struct fhci_usb *usb, struct packet *pkt) if ((td->data + td->actual_len) && trans_len) memcpy(td->data + td->actual_len, pkt->data, trans_len); - cq_put(usb->ep0->dummy_packets_Q, pkt->data); + cq_put(&usb->ep0->dummy_packets_Q, pkt->data); } recycle_frame(usb, pkt); @@ -213,7 +213,7 @@ static int add_packet(struct fhci_usb *usb, struct ed *ed, struct td *td) } /* update frame object fields before transmitting */ - pkt = cq_get(usb->ep0->empty_frame_Q); + pkt = cq_get(&usb->ep0->empty_frame_Q); if (!pkt) { fhci_dbg(usb->fhci, "there is no empty frame\n"); return -1; @@ -222,7 +222,7 @@ static int add_packet(struct fhci_usb *usb, struct ed *ed, struct td *td) pkt->info = 0; if (data == NULL) { - data = cq_get(usb->ep0->dummy_packets_Q); + data = cq_get(&usb->ep0->dummy_packets_Q); BUG_ON(!data); pkt->info = PKT_DUMMY_PACKET; } @@ -246,7 +246,7 @@ static int add_packet(struct fhci_usb *usb, struct ed *ed, struct td *td) list_del_init(&td->frame_lh); td->status = USB_TD_OK; if (pkt->info & PKT_DUMMY_PACKET) - cq_put(usb->ep0->dummy_packets_Q, pkt->data); + cq_put(&usb->ep0->dummy_packets_Q, pkt->data); recycle_frame(usb, pkt); usb->actual_frame->total_bytes -= (len + PROTOCOL_OVERHEAD); fhci_err(usb->fhci, "host transaction failed\n"); diff --git a/drivers/usb/host/fhci-tds.c b/drivers/usb/host/fhci-tds.c index b40332290319..d224ab467a40 100644 --- a/drivers/usb/host/fhci-tds.c +++ b/drivers/usb/host/fhci-tds.c @@ -106,33 +106,33 @@ void fhci_ep0_free(struct fhci_usb *usb) cpm_muram_free(cpm_muram_offset(ep->td_base)); if (ep->conf_frame_Q) { - size = cq_howmany(ep->conf_frame_Q); + size = cq_howmany(&ep->conf_frame_Q); for (; size; size--) { - struct packet *pkt = cq_get(ep->conf_frame_Q); + struct packet *pkt = cq_get(&ep->conf_frame_Q); kfree(pkt); } - cq_delete(ep->conf_frame_Q); + cq_delete(&ep->conf_frame_Q); } if (ep->empty_frame_Q) { - size = cq_howmany(ep->empty_frame_Q); + size = cq_howmany(&ep->empty_frame_Q); for (; size; size--) { - struct packet *pkt = cq_get(ep->empty_frame_Q); + struct packet *pkt = cq_get(&ep->empty_frame_Q); kfree(pkt); } - cq_delete(ep->empty_frame_Q); + cq_delete(&ep->empty_frame_Q); } if (ep->dummy_packets_Q) { - size = cq_howmany(ep->dummy_packets_Q); + size = cq_howmany(&ep->dummy_packets_Q); for (; size; size--) { - u8 *buff = cq_get(ep->dummy_packets_Q); + u8 *buff = cq_get(&ep->dummy_packets_Q); kfree(buff); } - cq_delete(ep->dummy_packets_Q); + cq_delete(&ep->dummy_packets_Q); } kfree(ep); @@ -175,10 +175,9 @@ u32 fhci_create_ep(struct fhci_usb *usb, enum fhci_mem_alloc data_mem, ep->td_base = cpm_muram_addr(ep_offset); /* zero all queue pointers */ - ep->conf_frame_Q = cq_new(ring_len + 2); - ep->empty_frame_Q = cq_new(ring_len + 2); - ep->dummy_packets_Q = cq_new(ring_len + 2); - if (!ep->conf_frame_Q || !ep->empty_frame_Q || !ep->dummy_packets_Q) { + if (cq_new(&ep->conf_frame_Q, ring_len + 2) || + cq_new(&ep->empty_frame_Q, ring_len + 2) || + cq_new(&ep->dummy_packets_Q, ring_len + 2)) { err_for = "frame_queues"; goto err; } @@ -199,8 +198,8 @@ u32 fhci_create_ep(struct fhci_usb *usb, enum fhci_mem_alloc data_mem, err_for = "buffer"; goto err; } - cq_put(ep->empty_frame_Q, pkt); - cq_put(ep->dummy_packets_Q, buff); + cq_put(&ep->empty_frame_Q, pkt); + cq_put(&ep->dummy_packets_Q, buff); } /* we put the endpoint parameter RAM right behind the TD ring */ @@ -319,7 +318,7 @@ static void fhci_td_transaction_confirm(struct fhci_usb *usb) if ((buf == DUMMY2_BD_BUFFER) && !(td_status & ~TD_W)) continue; - pkt = cq_get(ep->conf_frame_Q); + pkt = cq_get(&ep->conf_frame_Q); if (!pkt) fhci_err(usb->fhci, "no frame to confirm\n"); @@ -460,9 +459,9 @@ u32 fhci_host_transaction(struct fhci_usb *usb, out_be16(&td->length, pkt->len); /* put the frame to the confirmation queue */ - cq_put(ep->conf_frame_Q, pkt); + cq_put(&ep->conf_frame_Q, pkt); - if (cq_howmany(ep->conf_frame_Q) == 1) + if (cq_howmany(&ep->conf_frame_Q) == 1) out_8(&usb->fhci->regs->usb_comm, USB_CMD_STR_FIFO); return 0; diff --git a/drivers/usb/host/fhci.h b/drivers/usb/host/fhci.h index 7116284ed21a..72dae1c5ab38 100644 --- a/drivers/usb/host/fhci.h +++ b/drivers/usb/host/fhci.h @@ -423,9 +423,9 @@ struct endpoint { struct usb_td __iomem *td_base; /* first TD in the ring */ struct usb_td __iomem *conf_td; /* next TD for confirm after transac */ struct usb_td __iomem *empty_td;/* next TD for new transaction req. */ - struct kfifo *empty_frame_Q; /* Empty frames list to use */ - struct kfifo *conf_frame_Q; /* frames passed to TDs,waiting for tx */ - struct kfifo *dummy_packets_Q;/* dummy packets for the CRC overun */ + struct kfifo empty_frame_Q; /* Empty frames list to use */ + struct kfifo conf_frame_Q; /* frames passed to TDs,waiting for tx */ + struct kfifo dummy_packets_Q;/* dummy packets for the CRC overun */ bool already_pushed_dummy_bd; }; @@ -493,9 +493,9 @@ static inline struct usb_hcd *fhci_to_hcd(struct fhci_hcd *fhci) } /* fifo of pointers */ -static inline struct kfifo *cq_new(int size) +static inline int cq_new(struct kfifo *fifo, int size) { - return kfifo_alloc(size * sizeof(void *), GFP_KERNEL, NULL); + return kfifo_alloc(fifo, size * sizeof(void *), GFP_KERNEL); } static inline void cq_delete(struct kfifo *kfifo) @@ -505,19 +505,19 @@ static inline void cq_delete(struct kfifo *kfifo) static inline unsigned int cq_howmany(struct kfifo *kfifo) { - return __kfifo_len(kfifo) / sizeof(void *); + return kfifo_len(kfifo) / sizeof(void *); } static inline int cq_put(struct kfifo *kfifo, void *p) { - return __kfifo_put(kfifo, (void *)&p, sizeof(p)); + return kfifo_in(kfifo, (void *)&p, sizeof(p)); } static inline void *cq_get(struct kfifo *kfifo) { void *p = NULL; - __kfifo_get(kfifo, (void *)&p, sizeof(p)); + kfifo_out(kfifo, (void *)&p, sizeof(p)); return p; } diff --git a/drivers/usb/misc/appledisplay.c b/drivers/usb/misc/appledisplay.c index 1d8e39a557d9..1eb9e4162cc6 100644 --- a/drivers/usb/misc/appledisplay.c +++ b/drivers/usb/misc/appledisplay.c @@ -60,6 +60,7 @@ static struct usb_device_id appledisplay_table [] = { { APPLEDISPLAY_DEVICE(0x9218) }, { APPLEDISPLAY_DEVICE(0x9219) }, + { APPLEDISPLAY_DEVICE(0x921c) }, { APPLEDISPLAY_DEVICE(0x921d) }, /* Terminating entry */ @@ -72,8 +73,8 @@ struct appledisplay { struct usb_device *udev; /* usb device */ struct urb *urb; /* usb request block */ struct backlight_device *bd; /* backlight device */ - char *urbdata; /* interrupt URB data buffer */ - char *msgdata; /* control message data buffer */ + u8 *urbdata; /* interrupt URB data buffer */ + u8 *msgdata; /* control message data buffer */ struct delayed_work work; int button_pressed; diff --git a/drivers/usb/misc/emi62.c b/drivers/usb/misc/emi62.c index 602ee05ba9ff..59860b328534 100644 --- a/drivers/usb/misc/emi62.c +++ b/drivers/usb/misc/emi62.c @@ -167,7 +167,7 @@ static int emi62_load_firmware (struct usb_device *dev) err("%s - error loading firmware: error = %d", __func__, err); goto wraperr; } - } while (i > 0); + } while (rec); /* Assert reset (stop the CPU in the EMI) */ err = emi62_set_reset(dev,1); diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c index fe4934d9602c..ad26e6569665 100644 --- a/drivers/usb/musb/blackfin.c +++ b/drivers/usb/musb/blackfin.c @@ -29,6 +29,8 @@ void musb_write_fifo(struct musb_hw_ep *hw_ep, u16 len, const u8 *src) { void __iomem *fifo = hw_ep->fifo; void __iomem *epio = hw_ep->regs; + u8 epnum = hw_ep->epnum; + u16 dma_reg = 0; prefetch((u8 *)src); @@ -39,67 +41,113 @@ void musb_write_fifo(struct musb_hw_ep *hw_ep, u16 len, const u8 *src) dump_fifo_data(src, len); - if (unlikely((unsigned long)src & 0x01)) - outsw_8((unsigned long)fifo, src, - len & 0x01 ? (len >> 1) + 1 : len >> 1); - else - outsw((unsigned long)fifo, src, - len & 0x01 ? (len >> 1) + 1 : len >> 1); -} + if (!ANOMALY_05000380 && epnum != 0) { + flush_dcache_range((unsigned int)src, + (unsigned int)(src + len)); + + /* Setup DMA address register */ + dma_reg = (u16) ((u32) src & 0xFFFF); + bfin_write16(USB_DMA_REG(epnum, USB_DMAx_ADDR_LOW), dma_reg); + SSYNC(); + + dma_reg = (u16) (((u32) src >> 16) & 0xFFFF); + bfin_write16(USB_DMA_REG(epnum, USB_DMAx_ADDR_HIGH), dma_reg); + SSYNC(); + + /* Setup DMA count register */ + bfin_write16(USB_DMA_REG(epnum, USB_DMAx_COUNT_LOW), len); + bfin_write16(USB_DMA_REG(epnum, USB_DMAx_COUNT_HIGH), 0); + SSYNC(); + + /* Enable the DMA */ + dma_reg = (epnum << 4) | DMA_ENA | INT_ENA | DIRECTION; + bfin_write16(USB_DMA_REG(epnum, USB_DMAx_CTRL), dma_reg); + SSYNC(); + + /* Wait for compelete */ + while (!(bfin_read_USB_DMA_INTERRUPT() & (1 << epnum))) + cpu_relax(); + + /* acknowledge dma interrupt */ + bfin_write_USB_DMA_INTERRUPT(1 << epnum); + SSYNC(); + + /* Reset DMA */ + bfin_write16(USB_DMA_REG(epnum, USB_DMAx_CTRL), 0); + SSYNC(); + } else { + SSYNC(); + + if (unlikely((unsigned long)src & 0x01)) + outsw_8((unsigned long)fifo, src, + len & 0x01 ? (len >> 1) + 1 : len >> 1); + else + outsw((unsigned long)fifo, src, + len & 0x01 ? (len >> 1) + 1 : len >> 1); + } +} /* * Unload an endpoint's FIFO */ void musb_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *dst) { void __iomem *fifo = hw_ep->fifo; - -#ifdef CONFIG_BF52x u8 epnum = hw_ep->epnum; u16 dma_reg = 0; - invalidate_dcache_range((unsigned int)dst, - (unsigned int)(dst + len)); + if (ANOMALY_05000467 && epnum != 0) { - /* Setup DMA address register */ - dma_reg = (u16) ((u32) dst & 0xFFFF); - bfin_write16(USB_DMA_REG(epnum, USB_DMAx_ADDR_LOW), dma_reg); - SSYNC(); + invalidate_dcache_range((unsigned int)dst, + (unsigned int)(dst + len)); - dma_reg = (u16) (((u32) dst >> 16) & 0xFFFF); - bfin_write16(USB_DMA_REG(epnum, USB_DMAx_ADDR_HIGH), dma_reg); - SSYNC(); + /* Setup DMA address register */ + dma_reg = (u16) ((u32) dst & 0xFFFF); + bfin_write16(USB_DMA_REG(epnum, USB_DMAx_ADDR_LOW), dma_reg); + SSYNC(); - /* Setup DMA count register */ - bfin_write16(USB_DMA_REG(epnum, USB_DMAx_COUNT_LOW), len); - bfin_write16(USB_DMA_REG(epnum, USB_DMAx_COUNT_HIGH), 0); - SSYNC(); + dma_reg = (u16) (((u32) dst >> 16) & 0xFFFF); + bfin_write16(USB_DMA_REG(epnum, USB_DMAx_ADDR_HIGH), dma_reg); + SSYNC(); - /* Enable the DMA */ - dma_reg = (epnum << 4) | DMA_ENA | INT_ENA; - bfin_write16(USB_DMA_REG(epnum, USB_DMAx_CTRL), dma_reg); - SSYNC(); + /* Setup DMA count register */ + bfin_write16(USB_DMA_REG(epnum, USB_DMAx_COUNT_LOW), len); + bfin_write16(USB_DMA_REG(epnum, USB_DMAx_COUNT_HIGH), 0); + SSYNC(); - /* Wait for compelete */ - while (!(bfin_read_USB_DMA_INTERRUPT() & (1 << epnum))) - cpu_relax(); + /* Enable the DMA */ + dma_reg = (epnum << 4) | DMA_ENA | INT_ENA; + bfin_write16(USB_DMA_REG(epnum, USB_DMAx_CTRL), dma_reg); + SSYNC(); - /* acknowledge dma interrupt */ - bfin_write_USB_DMA_INTERRUPT(1 << epnum); - SSYNC(); + /* Wait for compelete */ + while (!(bfin_read_USB_DMA_INTERRUPT() & (1 << epnum))) + cpu_relax(); - /* Reset DMA */ - bfin_write16(USB_DMA_REG(epnum, USB_DMAx_CTRL), 0); - SSYNC(); -#else - if (unlikely((unsigned long)dst & 0x01)) - insw_8((unsigned long)fifo, dst, - len & 0x01 ? (len >> 1) + 1 : len >> 1); - else - insw((unsigned long)fifo, dst, - len & 0x01 ? (len >> 1) + 1 : len >> 1); -#endif + /* acknowledge dma interrupt */ + bfin_write_USB_DMA_INTERRUPT(1 << epnum); + SSYNC(); + /* Reset DMA */ + bfin_write16(USB_DMA_REG(epnum, USB_DMAx_CTRL), 0); + SSYNC(); + } else { + SSYNC(); + /* Read the last byte of packet with odd size from address fifo + 4 + * to trigger 1 byte access to EP0 FIFO. + */ + if (len == 1) + *dst = (u8)inw((unsigned long)fifo + 4); + else { + if (unlikely((unsigned long)dst & 0x01)) + insw_8((unsigned long)fifo, dst, len >> 1); + else + insw((unsigned long)fifo, dst, len >> 1); + + if (len & 0x01) + *(dst + len - 1) = (u8)inw((unsigned long)fifo + 4); + } + } DBG(4, "%cX ep%d fifo %p count %d buf %p\n", 'R', hw_ep->epnum, fifo, len, dst); diff --git a/drivers/usb/musb/blackfin.h b/drivers/usb/musb/blackfin.h index 10b7d7584f4b..bd9352a2ef2a 100644 --- a/drivers/usb/musb/blackfin.h +++ b/drivers/usb/musb/blackfin.h @@ -69,7 +69,6 @@ static void dump_fifo_data(u8 *buf, u16 len) #define dump_fifo_data(buf, len) do {} while (0) #endif -#ifdef CONFIG_BF52x #define USB_DMA_BASE USB_DMA_INTERRUPT #define USB_DMAx_CTRL 0x04 @@ -79,7 +78,6 @@ static void dump_fifo_data(u8 *buf, u16 len) #define USB_DMAx_COUNT_HIGH 0x14 #define USB_DMA_REG(ep, reg) (USB_DMA_BASE + 0x20 * ep + reg) -#endif /* Almost 1 second */ #define TIMER_DELAY (1 * HZ) diff --git a/drivers/usb/musb/cppi_dma.c b/drivers/usb/musb/cppi_dma.c index ef2332a9941d..a44a450c860d 100644 --- a/drivers/usb/musb/cppi_dma.c +++ b/drivers/usb/musb/cppi_dma.c @@ -1154,8 +1154,11 @@ irqreturn_t cppi_interrupt(int irq, void *dev_id) struct musb_hw_ep *hw_ep = NULL; u32 rx, tx; int i, index; + unsigned long flags; cppi = container_of(musb->dma_controller, struct cppi, controller); + if (cppi->irq) + spin_lock_irqsave(&musb->lock, flags); tibase = musb->ctrl_base; @@ -1285,6 +1288,9 @@ irqreturn_t cppi_interrupt(int irq, void *dev_id) /* write to CPPI EOI register to re-enable interrupts */ musb_writel(tibase, DAVINCI_CPPI_EOI_REG, 0); + if (cppi->irq) + spin_unlock_irqrestore(&musb->lock, flags); + return IRQ_HANDLED; } diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c index e16ff605c458..66913811af5e 100644 --- a/drivers/usb/musb/davinci.c +++ b/drivers/usb/musb/davinci.c @@ -42,7 +42,7 @@ #include "musb_core.h" #ifdef CONFIG_MACH_DAVINCI_EVM -#define GPIO_nVBUS_DRV 144 +#define GPIO_nVBUS_DRV 160 #endif #include "davinci.h" diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index bfe08f4975a3..5eb9318cff77 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -1319,7 +1319,7 @@ static int __init musb_core_init(u16 musb_type, struct musb *musb) #endif u8 reg; char *type; - char aInfo[78], aRevision[32], aDate[12]; + char aInfo[90], aRevision[32], aDate[12]; void __iomem *mbase = musb->mregs; int status = 0; int i; @@ -1521,6 +1521,14 @@ irqreturn_t musb_interrupt(struct musb *musb) (devctl & MUSB_DEVCTL_HM) ? "host" : "peripheral", musb->int_usb, musb->int_tx, musb->int_rx); +#ifdef CONFIG_USB_GADGET_MUSB_HDRC + if (is_otg_enabled(musb) || is_peripheral_enabled(musb)) + if (!musb->gadget_driver) { + DBG(5, "No gadget driver loaded\n"); + return IRQ_HANDLED; + } +#endif + /* the core can interrupt us for multiple reasons; docs have * a generic interrupt flowchart to follow */ @@ -2139,7 +2147,7 @@ static int __init musb_probe(struct platform_device *pdev) return musb_init_controller(dev, irq, base); } -static int __devexit musb_remove(struct platform_device *pdev) +static int __exit musb_remove(struct platform_device *pdev) { struct musb *musb = dev_to_musb(&pdev->dev); void __iomem *ctrl_base = musb->ctrl_base; @@ -2231,7 +2239,7 @@ static struct platform_driver musb_driver = { .owner = THIS_MODULE, .pm = MUSB_DEV_PM_OPS, }, - .remove = __devexit_p(musb_remove), + .remove = __exit_p(musb_remove), .shutdown = musb_shutdown, }; diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index c49b9ba025ab..cbcf14a236e6 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -309,7 +309,7 @@ static void txstate(struct musb *musb, struct musb_request *req) size_t request_size; /* setup DMA, then program endpoint CSR */ - request_size = min(request->length, + request_size = min_t(size_t, request->length, musb_ep->dma->max_len); if (request_size < musb_ep->packet_sz) musb_ep->dma->desired_mode = 0; @@ -319,7 +319,7 @@ static void txstate(struct musb *musb, struct musb_request *req) use_dma = use_dma && c->channel_program( musb_ep->dma, musb_ep->packet_sz, musb_ep->dma->desired_mode, - request->dma, request_size); + request->dma + request->actual, request_size); if (use_dma) { if (musb_ep->dma->desired_mode == 0) { /* @@ -515,12 +515,12 @@ void musb_g_tx(struct musb *musb, u8 epnum) if (csr & MUSB_TXCSR_FIFONOTEMPTY) return; - if (!musb_ep->desc) { + request = musb_ep->desc ? next_request(musb_ep) : NULL; + if (!request) { DBG(4, "%s idle now\n", musb_ep->end_point.name); return; - } else - request = next_request(musb_ep); + } } txstate(musb, to_musb_request(request)); @@ -746,6 +746,8 @@ void musb_g_rx(struct musb *musb, u8 epnum) musb_ep_select(mbase, epnum); request = next_request(musb_ep); + if (!request) + return; csr = musb_readw(epio, MUSB_RXCSR); dma = is_dma_capable() ? musb_ep->dma : NULL; @@ -1731,6 +1733,7 @@ int usb_gadget_register_driver(struct usb_gadget_driver *driver) spin_lock_irqsave(&musb->lock, flags); otg_set_peripheral(musb->xceiv, &musb->g); + musb->xceiv->state = OTG_STATE_B_IDLE; musb->is_active = 1; /* FIXME this ignores the softconnect flag. Drivers are diff --git a/drivers/usb/musb/musb_gadget_ep0.c b/drivers/usb/musb/musb_gadget_ep0.c index 8fba3f11e473..53d06451f820 100644 --- a/drivers/usb/musb/musb_gadget_ep0.c +++ b/drivers/usb/musb/musb_gadget_ep0.c @@ -664,7 +664,7 @@ irqreturn_t musb_g_ep0_irq(struct musb *musb) musb->ep0_state = MUSB_EP0_STAGE_STATUSIN; break; default: - ERR("SetupEnd came in a wrong ep0stage %s", + ERR("SetupEnd came in a wrong ep0stage %s\n", decode_ep0stage(musb->ep0_state)); } csr = musb_readw(regs, MUSB_CSR0); @@ -787,12 +787,18 @@ setup: handled = service_zero_data_request( musb, &setup); + /* + * We're expecting no data in any case, so + * always set the DATAEND bit -- doing this + * here helps avoid SetupEnd interrupt coming + * in the idle stage when we're stalling... + */ + musb->ackpend |= MUSB_CSR0_P_DATAEND; + /* status stage might be immediate */ - if (handled > 0) { - musb->ackpend |= MUSB_CSR0_P_DATAEND; + if (handled > 0) musb->ep0_state = MUSB_EP0_STAGE_STATUSIN; - } break; /* sequence #1 (IN to host), includes GET_STATUS diff --git a/drivers/usb/otg/isp1301_omap.c b/drivers/usb/otg/isp1301_omap.c index d54460a88173..78a209709260 100644 --- a/drivers/usb/otg/isp1301_omap.c +++ b/drivers/usb/otg/isp1301_omap.c @@ -843,7 +843,7 @@ static irqreturn_t omap_otg_irq(int irq, void *_isp) static struct platform_device *otg_dev; -static int otg_init(struct isp1301 *isp) +static int isp1301_otg_init(struct isp1301 *isp) { u32 l; @@ -1275,7 +1275,7 @@ static int __exit isp1301_remove(struct i2c_client *i2c) static int isp1301_otg_enable(struct isp1301 *isp) { power_up(isp); - otg_init(isp); + isp1301_otg_init(isp); /* NOTE: since we don't change this, this provides * a few more interrupts than are strictly needed. diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index f99498fca99a..216f187582ab 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -44,6 +44,7 @@ #include <linux/serial.h> #include <linux/usb/serial.h> #include "ftdi_sio.h" +#include "ftdi_sio_ids.h" /* * Version Information diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h index 4586a24fafb0..b0e0d64f822e 100644 --- a/drivers/usb/serial/ftdi_sio.h +++ b/drivers/usb/serial/ftdi_sio.h @@ -1,7 +1,10 @@ /* - * Definitions for the FTDI USB Single Port Serial Converter - + * Driver definitions for the FTDI USB Single Port Serial Converter - * known as FTDI_SIO (Serial Input/Output application of the chipset) * + * For USB vendor/product IDs (VID/PID), please see ftdi_sio_ids.h + * + * * The example I have is known as the USC-1000 which is available from * http://www.dse.co.nz - cat no XH4214 It looks similar to this: * http://www.dansdata.com/usbser.htm but I can't be sure There are other @@ -17,880 +20,7 @@ * Bill Ryder - bryder@sgi.com formerly of Silicon Graphics, Inc.- wrote the * FTDI_SIO implementation. * - * Philipp Gühring - pg@futureware.at - added the Device ID of the USB relais - * from Rudolf Gugler - * - */ - -#define FTDI_VID 0x0403 /* Vendor Id */ -#define FTDI_SIO_PID 0x8372 /* Product Id SIO application of 8U100AX */ -#define FTDI_8U232AM_PID 0x6001 /* Similar device to SIO above */ -#define FTDI_8U232AM_ALT_PID 0x6006 /* FTDI's alternate PID for above */ -#define FTDI_8U2232C_PID 0x6010 /* Dual channel device */ -#define FTDI_232RL_PID 0xFBFA /* Product ID for FT232RL */ -#define FTDI_4232H_PID 0x6011 /* Quad channel hi-speed device */ -#define FTDI_RELAIS_PID 0xFA10 /* Relais device from Rudolf Gugler */ -#define FTDI_NF_RIC_VID 0x0DCD /* Vendor Id */ -#define FTDI_NF_RIC_PID 0x0001 /* Product Id */ -#define FTDI_USBX_707_PID 0xF857 /* ADSTech IR Blaster USBX-707 */ - -/* Larsen and Brusgaard AltiTrack/USBtrack */ -#define LARSENBRUSGAARD_VID 0x0FD8 -#define LB_ALTITRACK_PID 0x0001 - -/* www.canusb.com Lawicel CANUSB device */ -#define FTDI_CANUSB_PID 0xFFA8 /* Product Id */ - -/* AlphaMicro Components AMC-232USB01 device */ -#define FTDI_AMC232_PID 0xFF00 /* Product Id */ - -/* www.candapter.com Ewert Energy Systems CANdapter device */ -#define FTDI_CANDAPTER_PID 0x9F80 /* Product Id */ - -/* SCS HF Radio Modems PID's (http://www.scs-ptc.com) */ -/* the VID is the standard ftdi vid (FTDI_VID) */ -#define FTDI_SCS_DEVICE_0_PID 0xD010 /* SCS PTC-IIusb */ -#define FTDI_SCS_DEVICE_1_PID 0xD011 /* SCS Tracker / DSP TNC */ -#define FTDI_SCS_DEVICE_2_PID 0xD012 -#define FTDI_SCS_DEVICE_3_PID 0xD013 -#define FTDI_SCS_DEVICE_4_PID 0xD014 -#define FTDI_SCS_DEVICE_5_PID 0xD015 -#define FTDI_SCS_DEVICE_6_PID 0xD016 -#define FTDI_SCS_DEVICE_7_PID 0xD017 - -/* ACT Solutions HomePro ZWave interface (http://www.act-solutions.com/HomePro.htm) */ -#define FTDI_ACTZWAVE_PID 0xF2D0 - - -/* www.starting-point-systems.com µChameleon device */ -#define FTDI_MICRO_CHAMELEON_PID 0xCAA0 /* Product Id */ - -/* www.irtrans.de device */ -#define FTDI_IRTRANS_PID 0xFC60 /* Product Id */ - - -/* www.thoughttechnology.com/ TT-USB provide with procomp use ftdi_sio */ -#define FTDI_TTUSB_PID 0xFF20 /* Product Id */ - -/* iPlus device */ -#define FTDI_IPLUS_PID 0xD070 /* Product Id */ -#define FTDI_IPLUS2_PID 0xD071 /* Product Id */ - -/* DMX4ALL DMX Interfaces */ -#define FTDI_DMX4ALL 0xC850 - -/* OpenDCC (www.opendcc.de) product id */ -#define FTDI_OPENDCC_PID 0xBFD8 -#define FTDI_OPENDCC_SNIFFER_PID 0xBFD9 -#define FTDI_OPENDCC_THROTTLE_PID 0xBFDA -#define FTDI_OPENDCC_GATEWAY_PID 0xBFDB - -/* Sprog II (Andrew Crosland's SprogII DCC interface) */ -#define FTDI_SPROG_II 0xF0C8 - -/* www.crystalfontz.com devices - thanx for providing free devices for evaluation ! */ -/* they use the ftdi chipset for the USB interface and the vendor id is the same */ -#define FTDI_XF_632_PID 0xFC08 /* 632: 16x2 Character Display */ -#define FTDI_XF_634_PID 0xFC09 /* 634: 20x4 Character Display */ -#define FTDI_XF_547_PID 0xFC0A /* 547: Two line Display */ -#define FTDI_XF_633_PID 0xFC0B /* 633: 16x2 Character Display with Keys */ -#define FTDI_XF_631_PID 0xFC0C /* 631: 20x2 Character Display */ -#define FTDI_XF_635_PID 0xFC0D /* 635: 20x4 Character Display */ -#define FTDI_XF_640_PID 0xFC0E /* 640: Two line Display */ -#define FTDI_XF_642_PID 0xFC0F /* 642: Two line Display */ - -/* Video Networks Limited / Homechoice in the UK use an ftdi-based device for their 1Mb */ -/* broadband internet service. The following PID is exhibited by the usb device supplied */ -/* (the VID is the standard ftdi vid (FTDI_VID) */ -#define FTDI_VNHCPCUSB_D_PID 0xfe38 /* Product Id */ - -/* - * PCDJ use ftdi based dj-controllers. The following PID is for their DAC-2 device - * http://www.pcdjhardware.com/DAC2.asp (PID sent by Wouter Paesen) - * (the VID is the standard ftdi vid (FTDI_VID) */ -#define FTDI_PCDJ_DAC2_PID 0xFA88 - -/* - * The following are the values for the Matrix Orbital LCD displays, - * which are the FT232BM ( similar to the 8U232AM ) - */ -#define FTDI_MTXORB_0_PID 0xFA00 /* Matrix Orbital Product Id */ -#define FTDI_MTXORB_1_PID 0xFA01 /* Matrix Orbital Product Id */ -#define FTDI_MTXORB_2_PID 0xFA02 /* Matrix Orbital Product Id */ -#define FTDI_MTXORB_3_PID 0xFA03 /* Matrix Orbital Product Id */ -#define FTDI_MTXORB_4_PID 0xFA04 /* Matrix Orbital Product Id */ -#define FTDI_MTXORB_5_PID 0xFA05 /* Matrix Orbital Product Id */ -#define FTDI_MTXORB_6_PID 0xFA06 /* Matrix Orbital Product Id */ - -/* OOCDlink by Joern Kaipf <joernk@web.de> - * (http://www.joernonline.de/dw/doku.php?id=start&idx=projects:oocdlink) */ -#define FTDI_OOCDLINK_PID 0xbaf8 /* Amontec JTAGkey */ - -/* - * The following are the values for the Matrix Orbital FTDI Range - * Anything in this range will use an FT232RL. - */ -#define MTXORB_VID 0x1B3D -#define MTXORB_FTDI_RANGE_0100_PID 0x0100 -#define MTXORB_FTDI_RANGE_0101_PID 0x0101 -#define MTXORB_FTDI_RANGE_0102_PID 0x0102 -#define MTXORB_FTDI_RANGE_0103_PID 0x0103 -#define MTXORB_FTDI_RANGE_0104_PID 0x0104 -#define MTXORB_FTDI_RANGE_0105_PID 0x0105 -#define MTXORB_FTDI_RANGE_0106_PID 0x0106 -#define MTXORB_FTDI_RANGE_0107_PID 0x0107 -#define MTXORB_FTDI_RANGE_0108_PID 0x0108 -#define MTXORB_FTDI_RANGE_0109_PID 0x0109 -#define MTXORB_FTDI_RANGE_010A_PID 0x010A -#define MTXORB_FTDI_RANGE_010B_PID 0x010B -#define MTXORB_FTDI_RANGE_010C_PID 0x010C -#define MTXORB_FTDI_RANGE_010D_PID 0x010D -#define MTXORB_FTDI_RANGE_010E_PID 0x010E -#define MTXORB_FTDI_RANGE_010F_PID 0x010F -#define MTXORB_FTDI_RANGE_0110_PID 0x0110 -#define MTXORB_FTDI_RANGE_0111_PID 0x0111 -#define MTXORB_FTDI_RANGE_0112_PID 0x0112 -#define MTXORB_FTDI_RANGE_0113_PID 0x0113 -#define MTXORB_FTDI_RANGE_0114_PID 0x0114 -#define MTXORB_FTDI_RANGE_0115_PID 0x0115 -#define MTXORB_FTDI_RANGE_0116_PID 0x0116 -#define MTXORB_FTDI_RANGE_0117_PID 0x0117 -#define MTXORB_FTDI_RANGE_0118_PID 0x0118 -#define MTXORB_FTDI_RANGE_0119_PID 0x0119 -#define MTXORB_FTDI_RANGE_011A_PID 0x011A -#define MTXORB_FTDI_RANGE_011B_PID 0x011B -#define MTXORB_FTDI_RANGE_011C_PID 0x011C -#define MTXORB_FTDI_RANGE_011D_PID 0x011D -#define MTXORB_FTDI_RANGE_011E_PID 0x011E -#define MTXORB_FTDI_RANGE_011F_PID 0x011F -#define MTXORB_FTDI_RANGE_0120_PID 0x0120 -#define MTXORB_FTDI_RANGE_0121_PID 0x0121 -#define MTXORB_FTDI_RANGE_0122_PID 0x0122 -#define MTXORB_FTDI_RANGE_0123_PID 0x0123 -#define MTXORB_FTDI_RANGE_0124_PID 0x0124 -#define MTXORB_FTDI_RANGE_0125_PID 0x0125 -#define MTXORB_FTDI_RANGE_0126_PID 0x0126 -#define MTXORB_FTDI_RANGE_0127_PID 0x0127 -#define MTXORB_FTDI_RANGE_0128_PID 0x0128 -#define MTXORB_FTDI_RANGE_0129_PID 0x0129 -#define MTXORB_FTDI_RANGE_012A_PID 0x012A -#define MTXORB_FTDI_RANGE_012B_PID 0x012B -#define MTXORB_FTDI_RANGE_012C_PID 0x012C -#define MTXORB_FTDI_RANGE_012D_PID 0x012D -#define MTXORB_FTDI_RANGE_012E_PID 0x012E -#define MTXORB_FTDI_RANGE_012F_PID 0x012F -#define MTXORB_FTDI_RANGE_0130_PID 0x0130 -#define MTXORB_FTDI_RANGE_0131_PID 0x0131 -#define MTXORB_FTDI_RANGE_0132_PID 0x0132 -#define MTXORB_FTDI_RANGE_0133_PID 0x0133 -#define MTXORB_FTDI_RANGE_0134_PID 0x0134 -#define MTXORB_FTDI_RANGE_0135_PID 0x0135 -#define MTXORB_FTDI_RANGE_0136_PID 0x0136 -#define MTXORB_FTDI_RANGE_0137_PID 0x0137 -#define MTXORB_FTDI_RANGE_0138_PID 0x0138 -#define MTXORB_FTDI_RANGE_0139_PID 0x0139 -#define MTXORB_FTDI_RANGE_013A_PID 0x013A -#define MTXORB_FTDI_RANGE_013B_PID 0x013B -#define MTXORB_FTDI_RANGE_013C_PID 0x013C -#define MTXORB_FTDI_RANGE_013D_PID 0x013D -#define MTXORB_FTDI_RANGE_013E_PID 0x013E -#define MTXORB_FTDI_RANGE_013F_PID 0x013F -#define MTXORB_FTDI_RANGE_0140_PID 0x0140 -#define MTXORB_FTDI_RANGE_0141_PID 0x0141 -#define MTXORB_FTDI_RANGE_0142_PID 0x0142 -#define MTXORB_FTDI_RANGE_0143_PID 0x0143 -#define MTXORB_FTDI_RANGE_0144_PID 0x0144 -#define MTXORB_FTDI_RANGE_0145_PID 0x0145 -#define MTXORB_FTDI_RANGE_0146_PID 0x0146 -#define MTXORB_FTDI_RANGE_0147_PID 0x0147 -#define MTXORB_FTDI_RANGE_0148_PID 0x0148 -#define MTXORB_FTDI_RANGE_0149_PID 0x0149 -#define MTXORB_FTDI_RANGE_014A_PID 0x014A -#define MTXORB_FTDI_RANGE_014B_PID 0x014B -#define MTXORB_FTDI_RANGE_014C_PID 0x014C -#define MTXORB_FTDI_RANGE_014D_PID 0x014D -#define MTXORB_FTDI_RANGE_014E_PID 0x014E -#define MTXORB_FTDI_RANGE_014F_PID 0x014F -#define MTXORB_FTDI_RANGE_0150_PID 0x0150 -#define MTXORB_FTDI_RANGE_0151_PID 0x0151 -#define MTXORB_FTDI_RANGE_0152_PID 0x0152 -#define MTXORB_FTDI_RANGE_0153_PID 0x0153 -#define MTXORB_FTDI_RANGE_0154_PID 0x0154 -#define MTXORB_FTDI_RANGE_0155_PID 0x0155 -#define MTXORB_FTDI_RANGE_0156_PID 0x0156 -#define MTXORB_FTDI_RANGE_0157_PID 0x0157 -#define MTXORB_FTDI_RANGE_0158_PID 0x0158 -#define MTXORB_FTDI_RANGE_0159_PID 0x0159 -#define MTXORB_FTDI_RANGE_015A_PID 0x015A -#define MTXORB_FTDI_RANGE_015B_PID 0x015B -#define MTXORB_FTDI_RANGE_015C_PID 0x015C -#define MTXORB_FTDI_RANGE_015D_PID 0x015D -#define MTXORB_FTDI_RANGE_015E_PID 0x015E -#define MTXORB_FTDI_RANGE_015F_PID 0x015F -#define MTXORB_FTDI_RANGE_0160_PID 0x0160 -#define MTXORB_FTDI_RANGE_0161_PID 0x0161 -#define MTXORB_FTDI_RANGE_0162_PID 0x0162 -#define MTXORB_FTDI_RANGE_0163_PID 0x0163 -#define MTXORB_FTDI_RANGE_0164_PID 0x0164 -#define MTXORB_FTDI_RANGE_0165_PID 0x0165 -#define MTXORB_FTDI_RANGE_0166_PID 0x0166 -#define MTXORB_FTDI_RANGE_0167_PID 0x0167 -#define MTXORB_FTDI_RANGE_0168_PID 0x0168 -#define MTXORB_FTDI_RANGE_0169_PID 0x0169 -#define MTXORB_FTDI_RANGE_016A_PID 0x016A -#define MTXORB_FTDI_RANGE_016B_PID 0x016B -#define MTXORB_FTDI_RANGE_016C_PID 0x016C -#define MTXORB_FTDI_RANGE_016D_PID 0x016D -#define MTXORB_FTDI_RANGE_016E_PID 0x016E -#define MTXORB_FTDI_RANGE_016F_PID 0x016F -#define MTXORB_FTDI_RANGE_0170_PID 0x0170 -#define MTXORB_FTDI_RANGE_0171_PID 0x0171 -#define MTXORB_FTDI_RANGE_0172_PID 0x0172 -#define MTXORB_FTDI_RANGE_0173_PID 0x0173 -#define MTXORB_FTDI_RANGE_0174_PID 0x0174 -#define MTXORB_FTDI_RANGE_0175_PID 0x0175 -#define MTXORB_FTDI_RANGE_0176_PID 0x0176 -#define MTXORB_FTDI_RANGE_0177_PID 0x0177 -#define MTXORB_FTDI_RANGE_0178_PID 0x0178 -#define MTXORB_FTDI_RANGE_0179_PID 0x0179 -#define MTXORB_FTDI_RANGE_017A_PID 0x017A -#define MTXORB_FTDI_RANGE_017B_PID 0x017B -#define MTXORB_FTDI_RANGE_017C_PID 0x017C -#define MTXORB_FTDI_RANGE_017D_PID 0x017D -#define MTXORB_FTDI_RANGE_017E_PID 0x017E -#define MTXORB_FTDI_RANGE_017F_PID 0x017F -#define MTXORB_FTDI_RANGE_0180_PID 0x0180 -#define MTXORB_FTDI_RANGE_0181_PID 0x0181 -#define MTXORB_FTDI_RANGE_0182_PID 0x0182 -#define MTXORB_FTDI_RANGE_0183_PID 0x0183 -#define MTXORB_FTDI_RANGE_0184_PID 0x0184 -#define MTXORB_FTDI_RANGE_0185_PID 0x0185 -#define MTXORB_FTDI_RANGE_0186_PID 0x0186 -#define MTXORB_FTDI_RANGE_0187_PID 0x0187 -#define MTXORB_FTDI_RANGE_0188_PID 0x0188 -#define MTXORB_FTDI_RANGE_0189_PID 0x0189 -#define MTXORB_FTDI_RANGE_018A_PID 0x018A -#define MTXORB_FTDI_RANGE_018B_PID 0x018B -#define MTXORB_FTDI_RANGE_018C_PID 0x018C -#define MTXORB_FTDI_RANGE_018D_PID 0x018D -#define MTXORB_FTDI_RANGE_018E_PID 0x018E -#define MTXORB_FTDI_RANGE_018F_PID 0x018F -#define MTXORB_FTDI_RANGE_0190_PID 0x0190 -#define MTXORB_FTDI_RANGE_0191_PID 0x0191 -#define MTXORB_FTDI_RANGE_0192_PID 0x0192 -#define MTXORB_FTDI_RANGE_0193_PID 0x0193 -#define MTXORB_FTDI_RANGE_0194_PID 0x0194 -#define MTXORB_FTDI_RANGE_0195_PID 0x0195 -#define MTXORB_FTDI_RANGE_0196_PID 0x0196 -#define MTXORB_FTDI_RANGE_0197_PID 0x0197 -#define MTXORB_FTDI_RANGE_0198_PID 0x0198 -#define MTXORB_FTDI_RANGE_0199_PID 0x0199 -#define MTXORB_FTDI_RANGE_019A_PID 0x019A -#define MTXORB_FTDI_RANGE_019B_PID 0x019B -#define MTXORB_FTDI_RANGE_019C_PID 0x019C -#define MTXORB_FTDI_RANGE_019D_PID 0x019D -#define MTXORB_FTDI_RANGE_019E_PID 0x019E -#define MTXORB_FTDI_RANGE_019F_PID 0x019F -#define MTXORB_FTDI_RANGE_01A0_PID 0x01A0 -#define MTXORB_FTDI_RANGE_01A1_PID 0x01A1 -#define MTXORB_FTDI_RANGE_01A2_PID 0x01A2 -#define MTXORB_FTDI_RANGE_01A3_PID 0x01A3 -#define MTXORB_FTDI_RANGE_01A4_PID 0x01A4 -#define MTXORB_FTDI_RANGE_01A5_PID 0x01A5 -#define MTXORB_FTDI_RANGE_01A6_PID 0x01A6 -#define MTXORB_FTDI_RANGE_01A7_PID 0x01A7 -#define MTXORB_FTDI_RANGE_01A8_PID 0x01A8 -#define MTXORB_FTDI_RANGE_01A9_PID 0x01A9 -#define MTXORB_FTDI_RANGE_01AA_PID 0x01AA -#define MTXORB_FTDI_RANGE_01AB_PID 0x01AB -#define MTXORB_FTDI_RANGE_01AC_PID 0x01AC -#define MTXORB_FTDI_RANGE_01AD_PID 0x01AD -#define MTXORB_FTDI_RANGE_01AE_PID 0x01AE -#define MTXORB_FTDI_RANGE_01AF_PID 0x01AF -#define MTXORB_FTDI_RANGE_01B0_PID 0x01B0 -#define MTXORB_FTDI_RANGE_01B1_PID 0x01B1 -#define MTXORB_FTDI_RANGE_01B2_PID 0x01B2 -#define MTXORB_FTDI_RANGE_01B3_PID 0x01B3 -#define MTXORB_FTDI_RANGE_01B4_PID 0x01B4 -#define MTXORB_FTDI_RANGE_01B5_PID 0x01B5 -#define MTXORB_FTDI_RANGE_01B6_PID 0x01B6 -#define MTXORB_FTDI_RANGE_01B7_PID 0x01B7 -#define MTXORB_FTDI_RANGE_01B8_PID 0x01B8 -#define MTXORB_FTDI_RANGE_01B9_PID 0x01B9 -#define MTXORB_FTDI_RANGE_01BA_PID 0x01BA -#define MTXORB_FTDI_RANGE_01BB_PID 0x01BB -#define MTXORB_FTDI_RANGE_01BC_PID 0x01BC -#define MTXORB_FTDI_RANGE_01BD_PID 0x01BD -#define MTXORB_FTDI_RANGE_01BE_PID 0x01BE -#define MTXORB_FTDI_RANGE_01BF_PID 0x01BF -#define MTXORB_FTDI_RANGE_01C0_PID 0x01C0 -#define MTXORB_FTDI_RANGE_01C1_PID 0x01C1 -#define MTXORB_FTDI_RANGE_01C2_PID 0x01C2 -#define MTXORB_FTDI_RANGE_01C3_PID 0x01C3 -#define MTXORB_FTDI_RANGE_01C4_PID 0x01C4 -#define MTXORB_FTDI_RANGE_01C5_PID 0x01C5 -#define MTXORB_FTDI_RANGE_01C6_PID 0x01C6 -#define MTXORB_FTDI_RANGE_01C7_PID 0x01C7 -#define MTXORB_FTDI_RANGE_01C8_PID 0x01C8 -#define MTXORB_FTDI_RANGE_01C9_PID 0x01C9 -#define MTXORB_FTDI_RANGE_01CA_PID 0x01CA -#define MTXORB_FTDI_RANGE_01CB_PID 0x01CB -#define MTXORB_FTDI_RANGE_01CC_PID 0x01CC -#define MTXORB_FTDI_RANGE_01CD_PID 0x01CD -#define MTXORB_FTDI_RANGE_01CE_PID 0x01CE -#define MTXORB_FTDI_RANGE_01CF_PID 0x01CF -#define MTXORB_FTDI_RANGE_01D0_PID 0x01D0 -#define MTXORB_FTDI_RANGE_01D1_PID 0x01D1 -#define MTXORB_FTDI_RANGE_01D2_PID 0x01D2 -#define MTXORB_FTDI_RANGE_01D3_PID 0x01D3 -#define MTXORB_FTDI_RANGE_01D4_PID 0x01D4 -#define MTXORB_FTDI_RANGE_01D5_PID 0x01D5 -#define MTXORB_FTDI_RANGE_01D6_PID 0x01D6 -#define MTXORB_FTDI_RANGE_01D7_PID 0x01D7 -#define MTXORB_FTDI_RANGE_01D8_PID 0x01D8 -#define MTXORB_FTDI_RANGE_01D9_PID 0x01D9 -#define MTXORB_FTDI_RANGE_01DA_PID 0x01DA -#define MTXORB_FTDI_RANGE_01DB_PID 0x01DB -#define MTXORB_FTDI_RANGE_01DC_PID 0x01DC -#define MTXORB_FTDI_RANGE_01DD_PID 0x01DD -#define MTXORB_FTDI_RANGE_01DE_PID 0x01DE -#define MTXORB_FTDI_RANGE_01DF_PID 0x01DF -#define MTXORB_FTDI_RANGE_01E0_PID 0x01E0 -#define MTXORB_FTDI_RANGE_01E1_PID 0x01E1 -#define MTXORB_FTDI_RANGE_01E2_PID 0x01E2 -#define MTXORB_FTDI_RANGE_01E3_PID 0x01E3 -#define MTXORB_FTDI_RANGE_01E4_PID 0x01E4 -#define MTXORB_FTDI_RANGE_01E5_PID 0x01E5 -#define MTXORB_FTDI_RANGE_01E6_PID 0x01E6 -#define MTXORB_FTDI_RANGE_01E7_PID 0x01E7 -#define MTXORB_FTDI_RANGE_01E8_PID 0x01E8 -#define MTXORB_FTDI_RANGE_01E9_PID 0x01E9 -#define MTXORB_FTDI_RANGE_01EA_PID 0x01EA -#define MTXORB_FTDI_RANGE_01EB_PID 0x01EB -#define MTXORB_FTDI_RANGE_01EC_PID 0x01EC -#define MTXORB_FTDI_RANGE_01ED_PID 0x01ED -#define MTXORB_FTDI_RANGE_01EE_PID 0x01EE -#define MTXORB_FTDI_RANGE_01EF_PID 0x01EF -#define MTXORB_FTDI_RANGE_01F0_PID 0x01F0 -#define MTXORB_FTDI_RANGE_01F1_PID 0x01F1 -#define MTXORB_FTDI_RANGE_01F2_PID 0x01F2 -#define MTXORB_FTDI_RANGE_01F3_PID 0x01F3 -#define MTXORB_FTDI_RANGE_01F4_PID 0x01F4 -#define MTXORB_FTDI_RANGE_01F5_PID 0x01F5 -#define MTXORB_FTDI_RANGE_01F6_PID 0x01F6 -#define MTXORB_FTDI_RANGE_01F7_PID 0x01F7 -#define MTXORB_FTDI_RANGE_01F8_PID 0x01F8 -#define MTXORB_FTDI_RANGE_01F9_PID 0x01F9 -#define MTXORB_FTDI_RANGE_01FA_PID 0x01FA -#define MTXORB_FTDI_RANGE_01FB_PID 0x01FB -#define MTXORB_FTDI_RANGE_01FC_PID 0x01FC -#define MTXORB_FTDI_RANGE_01FD_PID 0x01FD -#define MTXORB_FTDI_RANGE_01FE_PID 0x01FE -#define MTXORB_FTDI_RANGE_01FF_PID 0x01FF - - - -/* Interbiometrics USB I/O Board */ -/* Developed for Interbiometrics by Rudolf Gugler */ -#define INTERBIOMETRICS_VID 0x1209 -#define INTERBIOMETRICS_IOBOARD_PID 0x1002 -#define INTERBIOMETRICS_MINI_IOBOARD_PID 0x1006 - -/* - * The following are the values for the Perle Systems - * UltraPort USB serial converters - */ -#define FTDI_PERLE_ULTRAPORT_PID 0xF0C0 /* Perle UltraPort Product Id */ - -/* - * The following are the values for the Sealevel SeaLINK+ adapters. - * (Original list sent by Tuan Hoang. Ian Abbott renamed the macros and - * removed some PIDs that don't seem to match any existing products.) - */ -#define SEALEVEL_VID 0x0c52 /* Sealevel Vendor ID */ -#define SEALEVEL_2101_PID 0x2101 /* SeaLINK+232 (2101/2105) */ -#define SEALEVEL_2102_PID 0x2102 /* SeaLINK+485 (2102) */ -#define SEALEVEL_2103_PID 0x2103 /* SeaLINK+232I (2103) */ -#define SEALEVEL_2104_PID 0x2104 /* SeaLINK+485I (2104) */ -#define SEALEVEL_2106_PID 0x9020 /* SeaLINK+422 (2106) */ -#define SEALEVEL_2201_1_PID 0x2211 /* SeaPORT+2/232 (2201) Port 1 */ -#define SEALEVEL_2201_2_PID 0x2221 /* SeaPORT+2/232 (2201) Port 2 */ -#define SEALEVEL_2202_1_PID 0x2212 /* SeaPORT+2/485 (2202) Port 1 */ -#define SEALEVEL_2202_2_PID 0x2222 /* SeaPORT+2/485 (2202) Port 2 */ -#define SEALEVEL_2203_1_PID 0x2213 /* SeaPORT+2 (2203) Port 1 */ -#define SEALEVEL_2203_2_PID 0x2223 /* SeaPORT+2 (2203) Port 2 */ -#define SEALEVEL_2401_1_PID 0x2411 /* SeaPORT+4/232 (2401) Port 1 */ -#define SEALEVEL_2401_2_PID 0x2421 /* SeaPORT+4/232 (2401) Port 2 */ -#define SEALEVEL_2401_3_PID 0x2431 /* SeaPORT+4/232 (2401) Port 3 */ -#define SEALEVEL_2401_4_PID 0x2441 /* SeaPORT+4/232 (2401) Port 4 */ -#define SEALEVEL_2402_1_PID 0x2412 /* SeaPORT+4/485 (2402) Port 1 */ -#define SEALEVEL_2402_2_PID 0x2422 /* SeaPORT+4/485 (2402) Port 2 */ -#define SEALEVEL_2402_3_PID 0x2432 /* SeaPORT+4/485 (2402) Port 3 */ -#define SEALEVEL_2402_4_PID 0x2442 /* SeaPORT+4/485 (2402) Port 4 */ -#define SEALEVEL_2403_1_PID 0x2413 /* SeaPORT+4 (2403) Port 1 */ -#define SEALEVEL_2403_2_PID 0x2423 /* SeaPORT+4 (2403) Port 2 */ -#define SEALEVEL_2403_3_PID 0x2433 /* SeaPORT+4 (2403) Port 3 */ -#define SEALEVEL_2403_4_PID 0x2443 /* SeaPORT+4 (2403) Port 4 */ -#define SEALEVEL_2801_1_PID 0X2811 /* SeaLINK+8/232 (2801) Port 1 */ -#define SEALEVEL_2801_2_PID 0X2821 /* SeaLINK+8/232 (2801) Port 2 */ -#define SEALEVEL_2801_3_PID 0X2831 /* SeaLINK+8/232 (2801) Port 3 */ -#define SEALEVEL_2801_4_PID 0X2841 /* SeaLINK+8/232 (2801) Port 4 */ -#define SEALEVEL_2801_5_PID 0X2851 /* SeaLINK+8/232 (2801) Port 5 */ -#define SEALEVEL_2801_6_PID 0X2861 /* SeaLINK+8/232 (2801) Port 6 */ -#define SEALEVEL_2801_7_PID 0X2871 /* SeaLINK+8/232 (2801) Port 7 */ -#define SEALEVEL_2801_8_PID 0X2881 /* SeaLINK+8/232 (2801) Port 8 */ -#define SEALEVEL_2802_1_PID 0X2812 /* SeaLINK+8/485 (2802) Port 1 */ -#define SEALEVEL_2802_2_PID 0X2822 /* SeaLINK+8/485 (2802) Port 2 */ -#define SEALEVEL_2802_3_PID 0X2832 /* SeaLINK+8/485 (2802) Port 3 */ -#define SEALEVEL_2802_4_PID 0X2842 /* SeaLINK+8/485 (2802) Port 4 */ -#define SEALEVEL_2802_5_PID 0X2852 /* SeaLINK+8/485 (2802) Port 5 */ -#define SEALEVEL_2802_6_PID 0X2862 /* SeaLINK+8/485 (2802) Port 6 */ -#define SEALEVEL_2802_7_PID 0X2872 /* SeaLINK+8/485 (2802) Port 7 */ -#define SEALEVEL_2802_8_PID 0X2882 /* SeaLINK+8/485 (2802) Port 8 */ -#define SEALEVEL_2803_1_PID 0X2813 /* SeaLINK+8 (2803) Port 1 */ -#define SEALEVEL_2803_2_PID 0X2823 /* SeaLINK+8 (2803) Port 2 */ -#define SEALEVEL_2803_3_PID 0X2833 /* SeaLINK+8 (2803) Port 3 */ -#define SEALEVEL_2803_4_PID 0X2843 /* SeaLINK+8 (2803) Port 4 */ -#define SEALEVEL_2803_5_PID 0X2853 /* SeaLINK+8 (2803) Port 5 */ -#define SEALEVEL_2803_6_PID 0X2863 /* SeaLINK+8 (2803) Port 6 */ -#define SEALEVEL_2803_7_PID 0X2873 /* SeaLINK+8 (2803) Port 7 */ -#define SEALEVEL_2803_8_PID 0X2883 /* SeaLINK+8 (2803) Port 8 */ - -/* - * The following are the values for two KOBIL chipcard terminals. - */ -#define KOBIL_VID 0x0d46 /* KOBIL Vendor ID */ -#define KOBIL_CONV_B1_PID 0x2020 /* KOBIL Konverter for B1 */ -#define KOBIL_CONV_KAAN_PID 0x2021 /* KOBIL_Konverter for KAAN */ - -/* - * Icom ID-1 digital transceiver - */ - -#define ICOM_ID1_VID 0x0C26 -#define ICOM_ID1_PID 0x0004 - -/* - * ASK.fr devices - */ -#define FTDI_ASK_RDR400_PID 0xC991 /* ASK RDR 400 series card reader */ - -/* - * FTDI USB UART chips used in construction projects from the - * Elektor Electronics magazine (http://elektor-electronics.co.uk) - */ -#define ELEKTOR_VID 0x0C7D -#define ELEKTOR_FT323R_PID 0x0005 /* RFID-Reader, issue 09-2006 */ - -/* - * DSS-20 Sync Station for Sony Ericsson P800 - */ -#define FTDI_DSS20_PID 0xFC82 - -/* - * Home Electronics (www.home-electro.com) USB gadgets - */ -#define FTDI_HE_TIRA1_PID 0xFA78 /* Tira-1 IR transceiver */ - -/* USB-UIRT - An infrared receiver and transmitter using the 8U232AM chip */ -/* http://home.earthlink.net/~jrhees/USBUIRT/index.htm */ -#define FTDI_USB_UIRT_PID 0xF850 /* Product Id */ - -/* TNC-X USB-to-packet-radio adapter, versions prior to 3.0 (DLP module) */ - -#define FTDI_TNC_X_PID 0xEBE0 - -/* - * ELV USB devices submitted by Christian Abt of ELV (www.elv.de). - * All of these devices use FTDI's vendor ID (0x0403). - * - * The previously included PID for the UO 100 module was incorrect. - * In fact, that PID was for ELV's UR 100 USB-RS232 converter (0xFB58). - * - * Armin Laeuger originally sent the PID for the UM 100 module. - */ -#define FTDI_R2000KU_TRUE_RNG 0xFB80 /* R2000KU TRUE RNG */ -#define FTDI_ELV_UR100_PID 0xFB58 /* USB-RS232-Umsetzer (UR 100) */ -#define FTDI_ELV_UM100_PID 0xFB5A /* USB-Modul UM 100 */ -#define FTDI_ELV_UO100_PID 0xFB5B /* USB-Modul UO 100 */ -#define FTDI_ELV_ALC8500_PID 0xF06E /* ALC 8500 Expert */ -/* Additional ELV PIDs that default to using the FTDI D2XX drivers on - * MS Windows, rather than the FTDI Virtual Com Port drivers. - * Maybe these will be easier to use with the libftdi/libusb user-space - * drivers, or possibly the Comedi drivers in some cases. */ -#define FTDI_ELV_CLI7000_PID 0xFB59 /* Computer-Light-Interface (CLI 7000) */ -#define FTDI_ELV_PPS7330_PID 0xFB5C /* Processor-Power-Supply (PPS 7330) */ -#define FTDI_ELV_TFM100_PID 0xFB5D /* Temperartur-Feuchte Messgeraet (TFM 100) */ -#define FTDI_ELV_UDF77_PID 0xFB5E /* USB DCF Funkurh (UDF 77) */ -#define FTDI_ELV_UIO88_PID 0xFB5F /* USB-I/O Interface (UIO 88) */ -#define FTDI_ELV_UAD8_PID 0xF068 /* USB-AD-Wandler (UAD 8) */ -#define FTDI_ELV_UDA7_PID 0xF069 /* USB-DA-Wandler (UDA 7) */ -#define FTDI_ELV_USI2_PID 0xF06A /* USB-Schrittmotoren-Interface (USI 2) */ -#define FTDI_ELV_T1100_PID 0xF06B /* Thermometer (T 1100) */ -#define FTDI_ELV_PCD200_PID 0xF06C /* PC-Datenlogger (PCD 200) */ -#define FTDI_ELV_ULA200_PID 0xF06D /* USB-LCD-Ansteuerung (ULA 200) */ -#define FTDI_ELV_FHZ1000PC_PID 0xF06F /* FHZ 1000 PC */ -#define FTDI_ELV_CSI8_PID 0xE0F0 /* Computer-Schalt-Interface (CSI 8) */ -#define FTDI_ELV_EM1000DL_PID 0xE0F1 /* PC-Datenlogger fuer Energiemonitor (EM 1000 DL) */ -#define FTDI_ELV_PCK100_PID 0xE0F2 /* PC-Kabeltester (PCK 100) */ -#define FTDI_ELV_RFP500_PID 0xE0F3 /* HF-Leistungsmesser (RFP 500) */ -#define FTDI_ELV_FS20SIG_PID 0xE0F4 /* Signalgeber (FS 20 SIG) */ -#define FTDI_ELV_WS300PC_PID 0xE0F6 /* PC-Wetterstation (WS 300 PC) */ -#define FTDI_ELV_FHZ1300PC_PID 0xE0E8 /* FHZ 1300 PC */ -#define FTDI_ELV_WS500_PID 0xE0E9 /* PC-Wetterstation (WS 500) */ -#define FTDI_ELV_HS485_PID 0xE0EA /* USB to RS-485 adapter */ -#define FTDI_ELV_EM1010PC_PID 0xE0EF /* Engery monitor EM 1010 PC */ -#define FTDI_PHI_FISCO_PID 0xE40B /* PHI Fisco USB to Serial cable */ - -/* - * Definitions for ID TECH (www.idt-net.com) devices - */ -#define IDTECH_VID 0x0ACD /* ID TECH Vendor ID */ -#define IDTECH_IDT1221U_PID 0x0300 /* IDT1221U USB to RS-232 adapter */ - -/* - * Definitions for Omnidirectional Control Technology, Inc. devices - */ -#define OCT_VID 0x0B39 /* OCT vendor ID */ -/* Note: OCT US101 is also rebadged as Dick Smith Electronics (NZ) XH6381 */ -/* Also rebadged as Dick Smith Electronics (Aus) XH6451 */ -/* Also rebadged as SIIG Inc. model US2308 hardware version 1 */ -#define OCT_US101_PID 0x0421 /* OCT US101 USB to RS-232 */ - -/* an infrared receiver for user access control with IR tags */ -#define FTDI_PIEGROUP_PID 0xF208 /* Product Id */ - -/* - * Definitions for Artemis astronomical USB based cameras - * Check it at http://www.artemisccd.co.uk/ - */ -#define FTDI_ARTEMIS_PID 0xDF28 /* All Artemis Cameras */ - -/* - * Definitions for ATIK Instruments astronomical USB based cameras - * Check it at http://www.atik-instruments.com/ - */ -#define FTDI_ATIK_ATK16_PID 0xDF30 /* ATIK ATK-16 Grayscale Camera */ -#define FTDI_ATIK_ATK16C_PID 0xDF32 /* ATIK ATK-16C Colour Camera */ -#define FTDI_ATIK_ATK16HR_PID 0xDF31 /* ATIK ATK-16HR Grayscale Camera */ -#define FTDI_ATIK_ATK16HRC_PID 0xDF33 /* ATIK ATK-16HRC Colour Camera */ -#define FTDI_ATIK_ATK16IC_PID 0xDF35 /* ATIK ATK-16IC Grayscale Camera */ - -/* - * Protego product ids - */ -#define PROTEGO_SPECIAL_1 0xFC70 /* special/unknown device */ -#define PROTEGO_R2X0 0xFC71 /* R200-USB TRNG unit (R210, R220, and R230) */ -#define PROTEGO_SPECIAL_3 0xFC72 /* special/unknown device */ -#define PROTEGO_SPECIAL_4 0xFC73 /* special/unknown device */ - -/* - * Gude Analog- und Digitalsysteme GmbH - */ -#define FTDI_GUDEADS_E808_PID 0xE808 -#define FTDI_GUDEADS_E809_PID 0xE809 -#define FTDI_GUDEADS_E80A_PID 0xE80A -#define FTDI_GUDEADS_E80B_PID 0xE80B -#define FTDI_GUDEADS_E80C_PID 0xE80C -#define FTDI_GUDEADS_E80D_PID 0xE80D -#define FTDI_GUDEADS_E80E_PID 0xE80E -#define FTDI_GUDEADS_E80F_PID 0xE80F -#define FTDI_GUDEADS_E888_PID 0xE888 /* Expert ISDN Control USB */ -#define FTDI_GUDEADS_E889_PID 0xE889 /* USB RS-232 OptoBridge */ -#define FTDI_GUDEADS_E88A_PID 0xE88A -#define FTDI_GUDEADS_E88B_PID 0xE88B -#define FTDI_GUDEADS_E88C_PID 0xE88C -#define FTDI_GUDEADS_E88D_PID 0xE88D -#define FTDI_GUDEADS_E88E_PID 0xE88E -#define FTDI_GUDEADS_E88F_PID 0xE88F - -/* - * Linx Technologies product ids - */ -#define LINX_SDMUSBQSS_PID 0xF448 /* Linx SDM-USB-QS-S */ -#define LINX_MASTERDEVEL2_PID 0xF449 /* Linx Master Development 2.0 */ -#define LINX_FUTURE_0_PID 0xF44A /* Linx future device */ -#define LINX_FUTURE_1_PID 0xF44B /* Linx future device */ -#define LINX_FUTURE_2_PID 0xF44C /* Linx future device */ - -/* CCS Inc. ICDU/ICDU40 product ID - the FT232BM is used in an in-circuit-debugger */ -/* unit for PIC16's/PIC18's */ -#define FTDI_CCSICDU20_0_PID 0xF9D0 -#define FTDI_CCSICDU40_1_PID 0xF9D1 -#define FTDI_CCSMACHX_2_PID 0xF9D2 -#define FTDI_CCSLOAD_N_GO_3_PID 0xF9D3 -#define FTDI_CCSICDU64_4_PID 0xF9D4 -#define FTDI_CCSPRIME8_5_PID 0xF9D5 - -/* Inside Accesso contactless reader (http://www.insidefr.com) */ -#define INSIDE_ACCESSO 0xFAD0 - -/* - * Intrepid Control Systems (http://www.intrepidcs.com/) ValueCAN and NeoVI - */ -#define INTREPID_VID 0x093C -#define INTREPID_VALUECAN_PID 0x0601 -#define INTREPID_NEOVI_PID 0x0701 - -/* - * Falcom Wireless Communications GmbH - */ -#define FALCOM_VID 0x0F94 /* Vendor Id */ -#define FALCOM_TWIST_PID 0x0001 /* Falcom Twist USB GPRS modem */ -#define FALCOM_SAMBA_PID 0x0005 /* Falcom Samba USB GPRS modem */ - -/* - * SUUNTO product ids - */ -#define FTDI_SUUNTO_SPORTS_PID 0xF680 /* Suunto Sports instrument */ - -/* - * Oceanic product ids - */ -#define FTDI_OCEANIC_PID 0xF460 /* Oceanic dive instrument */ - -/* - * TTi (Thurlby Thandar Instruments) - */ -#define TTI_VID 0x103E /* Vendor Id */ -#define TTI_QL355P_PID 0x03E8 /* TTi QL355P power supply */ - -/* - * Definitions for B&B Electronics products. - */ -#define BANDB_VID 0x0856 /* B&B Electronics Vendor ID */ -#define BANDB_USOTL4_PID 0xAC01 /* USOTL4 Isolated RS-485 Converter */ -#define BANDB_USTL4_PID 0xAC02 /* USTL4 RS-485 Converter */ -#define BANDB_USO9ML2_PID 0xAC03 /* USO9ML2 Isolated RS-232 Converter */ -#define BANDB_USOPTL4_PID 0xAC11 -#define BANDB_USPTL4_PID 0xAC12 -#define BANDB_USO9ML2DR_2_PID 0xAC16 -#define BANDB_USO9ML2DR_PID 0xAC17 -#define BANDB_USOPTL4DR2_PID 0xAC18 /* USOPTL4R-2 2-port Isolated RS-232 Converter */ -#define BANDB_USOPTL4DR_PID 0xAC19 -#define BANDB_485USB9F_2W_PID 0xAC25 -#define BANDB_485USB9F_4W_PID 0xAC26 -#define BANDB_232USB9M_PID 0xAC27 -#define BANDB_485USBTB_2W_PID 0xAC33 -#define BANDB_485USBTB_4W_PID 0xAC34 -#define BANDB_TTL5USB9M_PID 0xAC49 -#define BANDB_TTL3USB9M_PID 0xAC50 -#define BANDB_ZZ_PROG1_USB_PID 0xBA02 - -/* - * RM Michaelides CANview USB (http://www.rmcan.com) - * CAN fieldbus interface adapter, added by port GmbH www.port.de) - * Ian Abbott changed the macro names for consistency. - */ -#define FTDI_RM_CANVIEW_PID 0xfd60 /* Product Id */ - -/* - * EVER Eco Pro UPS (http://www.ever.com.pl/) - */ - -#define EVER_ECO_PRO_CDS 0xe520 /* RS-232 converter */ - -/* - * 4N-GALAXY.DE PIDs for CAN-USB, USB-RS232, USB-RS422, USB-RS485, - * USB-TTY activ, USB-TTY passiv. Some PIDs are used by several devices - * and I'm not entirely sure which are used by which. - */ -#define FTDI_4N_GALAXY_DE_1_PID 0xF3C0 -#define FTDI_4N_GALAXY_DE_2_PID 0xF3C1 - -/* - * Mobility Electronics products. - */ -#define MOBILITY_VID 0x1342 -#define MOBILITY_USB_SERIAL_PID 0x0202 /* EasiDock USB 200 serial */ - -/* - * microHAM product IDs (http://www.microham.com). - * Submitted by Justin Burket (KL1RL) <zorton@jtan.com> - * and Mike Studer (K6EEP) <k6eep@hamsoftware.org>. - * Ian Abbott <abbotti@mev.co.uk> added a few more from the driver INF file. - */ -#define FTDI_MHAM_KW_PID 0xEEE8 /* USB-KW interface */ -#define FTDI_MHAM_YS_PID 0xEEE9 /* USB-YS interface */ -#define FTDI_MHAM_Y6_PID 0xEEEA /* USB-Y6 interface */ -#define FTDI_MHAM_Y8_PID 0xEEEB /* USB-Y8 interface */ -#define FTDI_MHAM_IC_PID 0xEEEC /* USB-IC interface */ -#define FTDI_MHAM_DB9_PID 0xEEED /* USB-DB9 interface */ -#define FTDI_MHAM_RS232_PID 0xEEEE /* USB-RS232 interface */ -#define FTDI_MHAM_Y9_PID 0xEEEF /* USB-Y9 interface */ - -/* - * Active Robots product ids. - */ -#define FTDI_ACTIVE_ROBOTS_PID 0xE548 /* USB comms board */ - -/* - * Xsens Technologies BV products (http://www.xsens.com). - */ -#define XSENS_CONVERTER_0_PID 0xD388 -#define XSENS_CONVERTER_1_PID 0xD389 -#define XSENS_CONVERTER_2_PID 0xD38A -#define XSENS_CONVERTER_3_PID 0xD38B -#define XSENS_CONVERTER_4_PID 0xD38C -#define XSENS_CONVERTER_5_PID 0xD38D -#define XSENS_CONVERTER_6_PID 0xD38E -#define XSENS_CONVERTER_7_PID 0xD38F - -/* - * Teratronik product ids. - * Submitted by O. Wölfelschneider. - */ -#define FTDI_TERATRONIK_VCP_PID 0xEC88 /* Teratronik device (preferring VCP driver on windows) */ -#define FTDI_TERATRONIK_D2XX_PID 0xEC89 /* Teratronik device (preferring D2XX driver on windows) */ - -/* - * Evolution Robotics products (http://www.evolution.com/). - * Submitted by Shawn M. Lavelle. - */ -#define EVOLUTION_VID 0xDEEE /* Vendor ID */ -#define EVOLUTION_ER1_PID 0x0300 /* ER1 Control Module */ -#define EVO_8U232AM_PID 0x02FF /* Evolution robotics RCM2 (FT232AM)*/ -#define EVO_HYBRID_PID 0x0302 /* Evolution robotics RCM4 PID (FT232BM)*/ -#define EVO_RCM4_PID 0x0303 /* Evolution robotics RCM4 PID */ - -/* Pyramid Computer GmbH */ -#define FTDI_PYRAMID_PID 0xE6C8 /* Pyramid Appliance Display */ - -/* - * NDI (www.ndigital.com) product ids - */ -#define FTDI_NDI_HUC_PID 0xDA70 /* NDI Host USB Converter */ -#define FTDI_NDI_SPECTRA_SCU_PID 0xDA71 /* NDI Spectra SCU */ -#define FTDI_NDI_FUTURE_2_PID 0xDA72 /* NDI future device #2 */ -#define FTDI_NDI_FUTURE_3_PID 0xDA73 /* NDI future device #3 */ -#define FTDI_NDI_AURORA_SCU_PID 0xDA74 /* NDI Aurora SCU */ - -/* - * Posiflex inc retail equipment (http://www.posiflex.com.tw) - */ -#define POSIFLEX_VID 0x0d3a /* Vendor ID */ -#define POSIFLEX_PP7000_PID 0x0300 /* PP-7000II thermal printer */ - -/* - * Westrex International devices submitted by Cory Lee - */ -#define FTDI_WESTREX_MODEL_777_PID 0xDC00 /* Model 777 */ -#define FTDI_WESTREX_MODEL_8900F_PID 0xDC01 /* Model 8900F */ - -/* - * RR-CirKits LocoBuffer USB (http://www.rr-cirkits.com) - */ -#define FTDI_RRCIRKITS_LOCOBUFFER_PID 0xc7d0 /* LocoBuffer USB */ - -/* - * Eclo (http://www.eclo.pt/) product IDs. - * PID 0xEA90 submitted by Martin Grill. - */ -#define FTDI_ECLO_COM_1WIRE_PID 0xEA90 /* COM to 1-Wire USB adaptor */ - -/* - * Papouch products (http://www.papouch.com/) - * Submitted by Folkert van Heusden - */ - -#define PAPOUCH_VID 0x5050 /* Vendor ID */ -#define PAPOUCH_TMU_PID 0x0400 /* TMU USB Thermometer */ -#define PAPOUCH_QUIDO4x4_PID 0x0900 /* Quido 4/4 Module */ - -/* - * ACG Identification Technologies GmbH products (http://www.acg.de/). - * Submitted by anton -at- goto10 -dot- org. */ -#define FTDI_ACG_HFDUAL_PID 0xDD20 /* HF Dual ISO Reader (RFID) */ - -/* - * Yost Engineering, Inc. products (www.yostengineering.com). - * PID 0xE050 submitted by Aaron Prose. - */ -#define FTDI_YEI_SERVOCENTER31_PID 0xE050 /* YEI ServoCenter3.1 USB */ - -/* - * ThorLabs USB motor drivers - */ -#define FTDI_THORLABS_PID 0xfaf0 /* ThorLabs USB motor drivers */ - -/* - * Testo products (http://www.testo.com/) - * Submitted by Colin Leroy - */ -#define TESTO_VID 0x128D -#define TESTO_USB_INTERFACE_PID 0x0001 - -/* - * Gamma Scout (http://gamma-scout.com/). Submitted by rsc@runtux.com. - */ -#define FTDI_GAMMA_SCOUT_PID 0xD678 /* Gamma Scout online */ - -/* - * Tactrix OpenPort (ECU) devices. - * OpenPort 1.3M submitted by Donour Sizemore. - * OpenPort 1.3S and 1.3U submitted by Ian Abbott. - */ -#define FTDI_TACTRIX_OPENPORT_13M_PID 0xCC48 /* OpenPort 1.3 Mitsubishi */ -#define FTDI_TACTRIX_OPENPORT_13S_PID 0xCC49 /* OpenPort 1.3 Subaru */ -#define FTDI_TACTRIX_OPENPORT_13U_PID 0xCC4A /* OpenPort 1.3 Universal */ - -/* - * Telldus Technologies - */ -#define TELLDUS_VID 0x1781 /* Vendor ID */ -#define TELLDUS_TELLSTICK_PID 0x0C30 /* RF control dongle 433 MHz using FT232RL */ - -/* - * IBS elektronik product ids - * Submitted by Thomas Schleusener - */ -#define FTDI_IBS_US485_PID 0xff38 /* IBS US485 (USB<-->RS422/485 interface) */ -#define FTDI_IBS_PICPRO_PID 0xff39 /* IBS PIC-Programmer */ -#define FTDI_IBS_PCMCIA_PID 0xff3a /* IBS Card reader for PCMCIA SRAM-cards */ -#define FTDI_IBS_PK1_PID 0xff3b /* IBS PK1 - Particel counter */ -#define FTDI_IBS_RS232MON_PID 0xff3c /* IBS RS232 - Monitor */ -#define FTDI_IBS_APP70_PID 0xff3d /* APP 70 (dust monitoring system) */ -#define FTDI_IBS_PEDO_PID 0xff3e /* IBS PEDO-Modem (RF modem 868.35 MHz) */ -#define FTDI_IBS_PROD_PID 0xff3f /* future device */ - -/* - * MaxStream devices www.maxstream.net - */ -#define FTDI_MAXSTREAM_PID 0xEE18 /* Xbee PKG-U Module */ - -/* Olimex */ -#define OLIMEX_VID 0x15BA -#define OLIMEX_ARM_USB_OCD_PID 0x0003 - -/* Luminary Micro Stellaris Boards, VID = FTDI_VID */ -/* FTDI 2332C Dual channel device, side A=245 FIFO (JTAG), Side B=RS232 UART */ -#define LMI_LM3S_DEVEL_BOARD_PID 0xbcd8 -#define LMI_LM3S_EVAL_BOARD_PID 0xbcd9 - -/* www.elsterelectricity.com Elster Unicom III Optical Probe */ -#define FTDI_ELSTER_UNICOM_PID 0xE700 /* Product Id */ - -/* - * The Mobility Lab (TML) - * Submitted by Pierre Castella - */ -#define TML_VID 0x1B91 /* Vendor ID */ -#define TML_USB_SERIAL_PID 0x0064 /* USB - Serial Converter */ - -/* Propox devices */ -#define FTDI_PROPOX_JTAGCABLEII_PID 0xD738 - -/* Rig Expert Ukraine devices */ -#define FTDI_REU_TINY_PID 0xED22 /* RigExpert Tiny */ - -/* Domintell products http://www.domintell.com */ -#define FTDI_DOMINTELL_DGQG_PID 0xEF50 /* Master */ -#define FTDI_DOMINTELL_DUSB_PID 0xEF51 /* DUSB01 module */ - -/* Alti-2 products http://www.alti-2.com */ -#define ALTI2_VID 0x1BC9 -#define ALTI2_N3_PID 0x6001 /* Neptune 3 */ /* Commands */ #define FTDI_SIO_RESET 0 /* Reset the port */ @@ -910,86 +40,6 @@ #define INTERFACE_C 3 #define INTERFACE_D 4 -/* - * FIC / OpenMoko, Inc. http://wiki.openmoko.org/wiki/Neo1973_Debug_Board_v3 - * Submitted by Harald Welte <laforge@openmoko.org> - */ -#define FIC_VID 0x1457 -#define FIC_NEO1973_DEBUG_PID 0x5118 - -/* - * RATOC REX-USB60F - */ -#define RATOC_VENDOR_ID 0x0584 -#define RATOC_PRODUCT_ID_USB60F 0xb020 - -/* - * DIEBOLD BCS SE923 - */ -#define DIEBOLD_BCS_SE923_PID 0xfb99 - -/* - * Atmel STK541 - */ -#define ATMEL_VID 0x03eb /* Vendor ID */ -#define STK541_PID 0x2109 /* Zigbee Controller */ - -/* - * Dresden Elektronic Sensor Terminal Board - */ -#define DE_VID 0x1cf1 /* Vendor ID */ -#define STB_PID 0x0001 /* Sensor Terminal Board */ -#define WHT_PID 0x0004 /* Wireless Handheld Terminal */ - -/* - * Blackfin gnICE JTAG - * http://docs.blackfin.uclinux.org/doku.php?id=hw:jtag:gnice - */ -#define ADI_VID 0x0456 -#define ADI_GNICE_PID 0xF000 -#define ADI_GNICEPLUS_PID 0xF001 - -/* - * JETI SPECTROMETER SPECBOS 1201 - * http://www.jeti.com/products/sys/scb/scb1201.php - */ -#define JETI_VID 0x0c6c -#define JETI_SPC1201_PID 0x04b2 - -/* - * Marvell SheevaPlug - */ -#define MARVELL_VID 0x9e88 -#define MARVELL_SHEEVAPLUG_PID 0x9e8f - -#define FTDI_TURTELIZER_PID 0xBDC8 /* JTAG/RS-232 adapter by egnite GmBH */ - -/* - * GN Otometrics (http://www.otometrics.com) - * Submitted by Ville Sundberg. - */ -#define GN_OTOMETRICS_VID 0x0c33 /* Vendor ID */ -#define AURICAL_USB_PID 0x0010 /* Aurical USB Audiometer */ - -/* - * Bayer Ascensia Contour blood glucose meter USB-converter cable. - * http://winglucofacts.com/cables/ - */ -#define BAYER_VID 0x1A79 -#define BAYER_CONTOUR_CABLE_PID 0x6001 - -/* - * Marvell OpenRD Base, Client - * http://www.open-rd.org - * OpenRD Base, Client use VID 0x0403 - */ -#define MARVELL_OPENRD_PID 0x9e90 - -/* - * Hameg HO820 and HO870 interface (using VID 0x0403) - */ -#define HAMEG_HO820_PID 0xed74 -#define HAMEG_HO870_PID 0xed71 /* * BmRequestType: 1100 0000b @@ -1504,4 +554,3 @@ typedef enum { * B2..7 Length of message - (not including Byte 0) * */ - diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h new file mode 100644 index 000000000000..da92b4952ffb --- /dev/null +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -0,0 +1,986 @@ +/* + * vendor/product IDs (VID/PID) of devices using FTDI USB serial converters. + * Please keep numerically sorted within individual areas, thanks! + * + * Philipp Gühring - pg@futureware.at - added the Device ID of the USB relais + * from Rudolf Gugler + * + */ + + +/**********************************/ +/***** devices using FTDI VID *****/ +/**********************************/ + + +#define FTDI_VID 0x0403 /* Vendor Id */ + + +/*** "original" FTDI device PIDs ***/ + +#define FTDI_8U232AM_PID 0x6001 /* Similar device to SIO above */ +#define FTDI_8U232AM_ALT_PID 0x6006 /* FTDI's alternate PID for above */ +#define FTDI_8U2232C_PID 0x6010 /* Dual channel device */ +#define FTDI_4232H_PID 0x6011 /* Quad channel hi-speed device */ +#define FTDI_SIO_PID 0x8372 /* Product Id SIO application of 8U100AX */ +#define FTDI_232RL_PID 0xFBFA /* Product ID for FT232RL */ + + +/*** third-party PIDs (using FTDI_VID) ***/ + +/* + * Marvell OpenRD Base, Client + * http://www.open-rd.org + * OpenRD Base, Client use VID 0x0403 + */ +#define MARVELL_OPENRD_PID 0x9e90 + +/* www.candapter.com Ewert Energy Systems CANdapter device */ +#define FTDI_CANDAPTER_PID 0x9F80 /* Product Id */ + +/* OOCDlink by Joern Kaipf <joernk@web.de> + * (http://www.joernonline.de/dw/doku.php?id=start&idx=projects:oocdlink) */ +#define FTDI_OOCDLINK_PID 0xbaf8 /* Amontec JTAGkey */ + +/* Luminary Micro Stellaris Boards, VID = FTDI_VID */ +/* FTDI 2332C Dual channel device, side A=245 FIFO (JTAG), Side B=RS232 UART */ +#define LMI_LM3S_DEVEL_BOARD_PID 0xbcd8 +#define LMI_LM3S_EVAL_BOARD_PID 0xbcd9 + +#define FTDI_TURTELIZER_PID 0xBDC8 /* JTAG/RS-232 adapter by egnite GmBH */ + +/* OpenDCC (www.opendcc.de) product id */ +#define FTDI_OPENDCC_PID 0xBFD8 +#define FTDI_OPENDCC_SNIFFER_PID 0xBFD9 +#define FTDI_OPENDCC_THROTTLE_PID 0xBFDA +#define FTDI_OPENDCC_GATEWAY_PID 0xBFDB + +/* + * RR-CirKits LocoBuffer USB (http://www.rr-cirkits.com) + */ +#define FTDI_RRCIRKITS_LOCOBUFFER_PID 0xc7d0 /* LocoBuffer USB */ + +/* DMX4ALL DMX Interfaces */ +#define FTDI_DMX4ALL 0xC850 + +/* + * ASK.fr devices + */ +#define FTDI_ASK_RDR400_PID 0xC991 /* ASK RDR 400 series card reader */ + +/* www.starting-point-systems.com µChameleon device */ +#define FTDI_MICRO_CHAMELEON_PID 0xCAA0 /* Product Id */ + +/* + * Tactrix OpenPort (ECU) devices. + * OpenPort 1.3M submitted by Donour Sizemore. + * OpenPort 1.3S and 1.3U submitted by Ian Abbott. + */ +#define FTDI_TACTRIX_OPENPORT_13M_PID 0xCC48 /* OpenPort 1.3 Mitsubishi */ +#define FTDI_TACTRIX_OPENPORT_13S_PID 0xCC49 /* OpenPort 1.3 Subaru */ +#define FTDI_TACTRIX_OPENPORT_13U_PID 0xCC4A /* OpenPort 1.3 Universal */ + +/* SCS HF Radio Modems PID's (http://www.scs-ptc.com) */ +/* the VID is the standard ftdi vid (FTDI_VID) */ +#define FTDI_SCS_DEVICE_0_PID 0xD010 /* SCS PTC-IIusb */ +#define FTDI_SCS_DEVICE_1_PID 0xD011 /* SCS Tracker / DSP TNC */ +#define FTDI_SCS_DEVICE_2_PID 0xD012 +#define FTDI_SCS_DEVICE_3_PID 0xD013 +#define FTDI_SCS_DEVICE_4_PID 0xD014 +#define FTDI_SCS_DEVICE_5_PID 0xD015 +#define FTDI_SCS_DEVICE_6_PID 0xD016 +#define FTDI_SCS_DEVICE_7_PID 0xD017 + +/* iPlus device */ +#define FTDI_IPLUS_PID 0xD070 /* Product Id */ +#define FTDI_IPLUS2_PID 0xD071 /* Product Id */ + +/* + * Gamma Scout (http://gamma-scout.com/). Submitted by rsc@runtux.com. + */ +#define FTDI_GAMMA_SCOUT_PID 0xD678 /* Gamma Scout online */ + +/* Propox devices */ +#define FTDI_PROPOX_JTAGCABLEII_PID 0xD738 + +/* + * Xsens Technologies BV products (http://www.xsens.com). + */ +#define XSENS_CONVERTER_0_PID 0xD388 +#define XSENS_CONVERTER_1_PID 0xD389 +#define XSENS_CONVERTER_2_PID 0xD38A +#define XSENS_CONVERTER_3_PID 0xD38B +#define XSENS_CONVERTER_4_PID 0xD38C +#define XSENS_CONVERTER_5_PID 0xD38D +#define XSENS_CONVERTER_6_PID 0xD38E +#define XSENS_CONVERTER_7_PID 0xD38F + +/* + * NDI (www.ndigital.com) product ids + */ +#define FTDI_NDI_HUC_PID 0xDA70 /* NDI Host USB Converter */ +#define FTDI_NDI_SPECTRA_SCU_PID 0xDA71 /* NDI Spectra SCU */ +#define FTDI_NDI_FUTURE_2_PID 0xDA72 /* NDI future device #2 */ +#define FTDI_NDI_FUTURE_3_PID 0xDA73 /* NDI future device #3 */ +#define FTDI_NDI_AURORA_SCU_PID 0xDA74 /* NDI Aurora SCU */ + +/* + * Westrex International devices submitted by Cory Lee + */ +#define FTDI_WESTREX_MODEL_777_PID 0xDC00 /* Model 777 */ +#define FTDI_WESTREX_MODEL_8900F_PID 0xDC01 /* Model 8900F */ + +/* + * ACG Identification Technologies GmbH products (http://www.acg.de/). + * Submitted by anton -at- goto10 -dot- org. + */ +#define FTDI_ACG_HFDUAL_PID 0xDD20 /* HF Dual ISO Reader (RFID) */ + +/* + * Definitions for Artemis astronomical USB based cameras + * Check it at http://www.artemisccd.co.uk/ + */ +#define FTDI_ARTEMIS_PID 0xDF28 /* All Artemis Cameras */ + +/* + * Definitions for ATIK Instruments astronomical USB based cameras + * Check it at http://www.atik-instruments.com/ + */ +#define FTDI_ATIK_ATK16_PID 0xDF30 /* ATIK ATK-16 Grayscale Camera */ +#define FTDI_ATIK_ATK16C_PID 0xDF32 /* ATIK ATK-16C Colour Camera */ +#define FTDI_ATIK_ATK16HR_PID 0xDF31 /* ATIK ATK-16HR Grayscale Camera */ +#define FTDI_ATIK_ATK16HRC_PID 0xDF33 /* ATIK ATK-16HRC Colour Camera */ +#define FTDI_ATIK_ATK16IC_PID 0xDF35 /* ATIK ATK-16IC Grayscale Camera */ + +/* + * Yost Engineering, Inc. products (www.yostengineering.com). + * PID 0xE050 submitted by Aaron Prose. + */ +#define FTDI_YEI_SERVOCENTER31_PID 0xE050 /* YEI ServoCenter3.1 USB */ + +/* + * ELV USB devices submitted by Christian Abt of ELV (www.elv.de). + * All of these devices use FTDI's vendor ID (0x0403). + * + * The previously included PID for the UO 100 module was incorrect. + * In fact, that PID was for ELV's UR 100 USB-RS232 converter (0xFB58). + * + * Armin Laeuger originally sent the PID for the UM 100 module. + */ +#define FTDI_ELV_FHZ1300PC_PID 0xE0E8 /* FHZ 1300 PC */ +#define FTDI_ELV_WS500_PID 0xE0E9 /* PC-Wetterstation (WS 500) */ +#define FTDI_ELV_HS485_PID 0xE0EA /* USB to RS-485 adapter */ +#define FTDI_ELV_EM1010PC_PID 0xE0EF /* Engery monitor EM 1010 PC */ +#define FTDI_ELV_CSI8_PID 0xE0F0 /* Computer-Schalt-Interface (CSI 8) */ +#define FTDI_ELV_EM1000DL_PID 0xE0F1 /* PC-Datenlogger fuer Energiemonitor (EM 1000 DL) */ +#define FTDI_ELV_PCK100_PID 0xE0F2 /* PC-Kabeltester (PCK 100) */ +#define FTDI_ELV_RFP500_PID 0xE0F3 /* HF-Leistungsmesser (RFP 500) */ +#define FTDI_ELV_FS20SIG_PID 0xE0F4 /* Signalgeber (FS 20 SIG) */ +#define FTDI_ELV_WS300PC_PID 0xE0F6 /* PC-Wetterstation (WS 300 PC) */ +#define FTDI_PHI_FISCO_PID 0xE40B /* PHI Fisco USB to Serial cable */ +#define FTDI_ELV_UAD8_PID 0xF068 /* USB-AD-Wandler (UAD 8) */ +#define FTDI_ELV_UDA7_PID 0xF069 /* USB-DA-Wandler (UDA 7) */ +#define FTDI_ELV_USI2_PID 0xF06A /* USB-Schrittmotoren-Interface (USI 2) */ +#define FTDI_ELV_T1100_PID 0xF06B /* Thermometer (T 1100) */ +#define FTDI_ELV_PCD200_PID 0xF06C /* PC-Datenlogger (PCD 200) */ +#define FTDI_ELV_ULA200_PID 0xF06D /* USB-LCD-Ansteuerung (ULA 200) */ +#define FTDI_ELV_ALC8500_PID 0xF06E /* ALC 8500 Expert */ +#define FTDI_ELV_FHZ1000PC_PID 0xF06F /* FHZ 1000 PC */ +#define FTDI_ELV_UR100_PID 0xFB58 /* USB-RS232-Umsetzer (UR 100) */ +#define FTDI_ELV_UM100_PID 0xFB5A /* USB-Modul UM 100 */ +#define FTDI_ELV_UO100_PID 0xFB5B /* USB-Modul UO 100 */ +/* Additional ELV PIDs that default to using the FTDI D2XX drivers on + * MS Windows, rather than the FTDI Virtual Com Port drivers. + * Maybe these will be easier to use with the libftdi/libusb user-space + * drivers, or possibly the Comedi drivers in some cases. */ +#define FTDI_ELV_CLI7000_PID 0xFB59 /* Computer-Light-Interface (CLI 7000) */ +#define FTDI_ELV_PPS7330_PID 0xFB5C /* Processor-Power-Supply (PPS 7330) */ +#define FTDI_ELV_TFM100_PID 0xFB5D /* Temperartur-Feuchte Messgeraet (TFM 100) */ +#define FTDI_ELV_UDF77_PID 0xFB5E /* USB DCF Funkurh (UDF 77) */ +#define FTDI_ELV_UIO88_PID 0xFB5F /* USB-I/O Interface (UIO 88) */ + +/* + * EVER Eco Pro UPS (http://www.ever.com.pl/) + */ + +#define EVER_ECO_PRO_CDS 0xe520 /* RS-232 converter */ + +/* + * Active Robots product ids. + */ +#define FTDI_ACTIVE_ROBOTS_PID 0xE548 /* USB comms board */ + +/* Pyramid Computer GmbH */ +#define FTDI_PYRAMID_PID 0xE6C8 /* Pyramid Appliance Display */ + +/* www.elsterelectricity.com Elster Unicom III Optical Probe */ +#define FTDI_ELSTER_UNICOM_PID 0xE700 /* Product Id */ + +/* + * Gude Analog- und Digitalsysteme GmbH + */ +#define FTDI_GUDEADS_E808_PID 0xE808 +#define FTDI_GUDEADS_E809_PID 0xE809 +#define FTDI_GUDEADS_E80A_PID 0xE80A +#define FTDI_GUDEADS_E80B_PID 0xE80B +#define FTDI_GUDEADS_E80C_PID 0xE80C +#define FTDI_GUDEADS_E80D_PID 0xE80D +#define FTDI_GUDEADS_E80E_PID 0xE80E +#define FTDI_GUDEADS_E80F_PID 0xE80F +#define FTDI_GUDEADS_E888_PID 0xE888 /* Expert ISDN Control USB */ +#define FTDI_GUDEADS_E889_PID 0xE889 /* USB RS-232 OptoBridge */ +#define FTDI_GUDEADS_E88A_PID 0xE88A +#define FTDI_GUDEADS_E88B_PID 0xE88B +#define FTDI_GUDEADS_E88C_PID 0xE88C +#define FTDI_GUDEADS_E88D_PID 0xE88D +#define FTDI_GUDEADS_E88E_PID 0xE88E +#define FTDI_GUDEADS_E88F_PID 0xE88F + +/* + * Eclo (http://www.eclo.pt/) product IDs. + * PID 0xEA90 submitted by Martin Grill. + */ +#define FTDI_ECLO_COM_1WIRE_PID 0xEA90 /* COM to 1-Wire USB adaptor */ + +/* TNC-X USB-to-packet-radio adapter, versions prior to 3.0 (DLP module) */ +#define FTDI_TNC_X_PID 0xEBE0 + +/* + * Teratronik product ids. + * Submitted by O. Wölfelschneider. + */ +#define FTDI_TERATRONIK_VCP_PID 0xEC88 /* Teratronik device (preferring VCP driver on windows) */ +#define FTDI_TERATRONIK_D2XX_PID 0xEC89 /* Teratronik device (preferring D2XX driver on windows) */ + +/* Rig Expert Ukraine devices */ +#define FTDI_REU_TINY_PID 0xED22 /* RigExpert Tiny */ + +/* + * Hameg HO820 and HO870 interface (using VID 0x0403) + */ +#define HAMEG_HO820_PID 0xed74 +#define HAMEG_HO870_PID 0xed71 + +/* + * MaxStream devices www.maxstream.net + */ +#define FTDI_MAXSTREAM_PID 0xEE18 /* Xbee PKG-U Module */ + +/* + * microHAM product IDs (http://www.microham.com). + * Submitted by Justin Burket (KL1RL) <zorton@jtan.com> + * and Mike Studer (K6EEP) <k6eep@hamsoftware.org>. + * Ian Abbott <abbotti@mev.co.uk> added a few more from the driver INF file. + */ +#define FTDI_MHAM_KW_PID 0xEEE8 /* USB-KW interface */ +#define FTDI_MHAM_YS_PID 0xEEE9 /* USB-YS interface */ +#define FTDI_MHAM_Y6_PID 0xEEEA /* USB-Y6 interface */ +#define FTDI_MHAM_Y8_PID 0xEEEB /* USB-Y8 interface */ +#define FTDI_MHAM_IC_PID 0xEEEC /* USB-IC interface */ +#define FTDI_MHAM_DB9_PID 0xEEED /* USB-DB9 interface */ +#define FTDI_MHAM_RS232_PID 0xEEEE /* USB-RS232 interface */ +#define FTDI_MHAM_Y9_PID 0xEEEF /* USB-Y9 interface */ + +/* Domintell products http://www.domintell.com */ +#define FTDI_DOMINTELL_DGQG_PID 0xEF50 /* Master */ +#define FTDI_DOMINTELL_DUSB_PID 0xEF51 /* DUSB01 module */ + +/* + * The following are the values for the Perle Systems + * UltraPort USB serial converters + */ +#define FTDI_PERLE_ULTRAPORT_PID 0xF0C0 /* Perle UltraPort Product Id */ + +/* Sprog II (Andrew Crosland's SprogII DCC interface) */ +#define FTDI_SPROG_II 0xF0C8 + +/* an infrared receiver for user access control with IR tags */ +#define FTDI_PIEGROUP_PID 0xF208 /* Product Id */ + +/* ACT Solutions HomePro ZWave interface + (http://www.act-solutions.com/HomePro.htm) */ +#define FTDI_ACTZWAVE_PID 0xF2D0 + +/* + * 4N-GALAXY.DE PIDs for CAN-USB, USB-RS232, USB-RS422, USB-RS485, + * USB-TTY activ, USB-TTY passiv. Some PIDs are used by several devices + * and I'm not entirely sure which are used by which. + */ +#define FTDI_4N_GALAXY_DE_1_PID 0xF3C0 +#define FTDI_4N_GALAXY_DE_2_PID 0xF3C1 + +/* + * Linx Technologies product ids + */ +#define LINX_SDMUSBQSS_PID 0xF448 /* Linx SDM-USB-QS-S */ +#define LINX_MASTERDEVEL2_PID 0xF449 /* Linx Master Development 2.0 */ +#define LINX_FUTURE_0_PID 0xF44A /* Linx future device */ +#define LINX_FUTURE_1_PID 0xF44B /* Linx future device */ +#define LINX_FUTURE_2_PID 0xF44C /* Linx future device */ + +/* + * Oceanic product ids + */ +#define FTDI_OCEANIC_PID 0xF460 /* Oceanic dive instrument */ + +/* + * SUUNTO product ids + */ +#define FTDI_SUUNTO_SPORTS_PID 0xF680 /* Suunto Sports instrument */ + +/* USB-UIRT - An infrared receiver and transmitter using the 8U232AM chip */ +/* http://home.earthlink.net/~jrhees/USBUIRT/index.htm */ +#define FTDI_USB_UIRT_PID 0xF850 /* Product Id */ + +/* CCS Inc. ICDU/ICDU40 product ID - + * the FT232BM is used in an in-circuit-debugger unit for PIC16's/PIC18's */ +#define FTDI_CCSICDU20_0_PID 0xF9D0 +#define FTDI_CCSICDU40_1_PID 0xF9D1 +#define FTDI_CCSMACHX_2_PID 0xF9D2 +#define FTDI_CCSLOAD_N_GO_3_PID 0xF9D3 +#define FTDI_CCSICDU64_4_PID 0xF9D4 +#define FTDI_CCSPRIME8_5_PID 0xF9D5 + +/* + * The following are the values for the Matrix Orbital LCD displays, + * which are the FT232BM ( similar to the 8U232AM ) + */ +#define FTDI_MTXORB_0_PID 0xFA00 /* Matrix Orbital Product Id */ +#define FTDI_MTXORB_1_PID 0xFA01 /* Matrix Orbital Product Id */ +#define FTDI_MTXORB_2_PID 0xFA02 /* Matrix Orbital Product Id */ +#define FTDI_MTXORB_3_PID 0xFA03 /* Matrix Orbital Product Id */ +#define FTDI_MTXORB_4_PID 0xFA04 /* Matrix Orbital Product Id */ +#define FTDI_MTXORB_5_PID 0xFA05 /* Matrix Orbital Product Id */ +#define FTDI_MTXORB_6_PID 0xFA06 /* Matrix Orbital Product Id */ + +/* + * Home Electronics (www.home-electro.com) USB gadgets + */ +#define FTDI_HE_TIRA1_PID 0xFA78 /* Tira-1 IR transceiver */ + +/* Inside Accesso contactless reader (http://www.insidefr.com) */ +#define INSIDE_ACCESSO 0xFAD0 + +/* + * ThorLabs USB motor drivers + */ +#define FTDI_THORLABS_PID 0xfaf0 /* ThorLabs USB motor drivers */ + +/* + * Protego product ids + */ +#define PROTEGO_SPECIAL_1 0xFC70 /* special/unknown device */ +#define PROTEGO_R2X0 0xFC71 /* R200-USB TRNG unit (R210, R220, and R230) */ +#define PROTEGO_SPECIAL_3 0xFC72 /* special/unknown device */ +#define PROTEGO_SPECIAL_4 0xFC73 /* special/unknown device */ + +/* + * DSS-20 Sync Station for Sony Ericsson P800 + */ +#define FTDI_DSS20_PID 0xFC82 + +/* www.irtrans.de device */ +#define FTDI_IRTRANS_PID 0xFC60 /* Product Id */ + +/* + * RM Michaelides CANview USB (http://www.rmcan.com) (FTDI_VID) + * CAN fieldbus interface adapter, added by port GmbH www.port.de) + * Ian Abbott changed the macro names for consistency. + */ +#define FTDI_RM_CANVIEW_PID 0xfd60 /* Product Id */ +/* www.thoughttechnology.com/ TT-USB provide with procomp use ftdi_sio */ +#define FTDI_TTUSB_PID 0xFF20 /* Product Id */ + +#define FTDI_USBX_707_PID 0xF857 /* ADSTech IR Blaster USBX-707 (FTDI_VID) */ + +#define FTDI_RELAIS_PID 0xFA10 /* Relais device from Rudolf Gugler */ + +/* + * PCDJ use ftdi based dj-controllers. The following PID is + * for their DAC-2 device http://www.pcdjhardware.com/DAC2.asp + * (the VID is the standard ftdi vid (FTDI_VID), PID sent by Wouter Paesen) + */ +#define FTDI_PCDJ_DAC2_PID 0xFA88 + +#define FTDI_R2000KU_TRUE_RNG 0xFB80 /* R2000KU TRUE RNG (FTDI_VID) */ + +/* + * DIEBOLD BCS SE923 (FTDI_VID) + */ +#define DIEBOLD_BCS_SE923_PID 0xfb99 + +/* www.crystalfontz.com devices + * - thanx for providing free devices for evaluation ! + * they use the ftdi chipset for the USB interface + * and the vendor id is the same + */ +#define FTDI_XF_632_PID 0xFC08 /* 632: 16x2 Character Display */ +#define FTDI_XF_634_PID 0xFC09 /* 634: 20x4 Character Display */ +#define FTDI_XF_547_PID 0xFC0A /* 547: Two line Display */ +#define FTDI_XF_633_PID 0xFC0B /* 633: 16x2 Character Display with Keys */ +#define FTDI_XF_631_PID 0xFC0C /* 631: 20x2 Character Display */ +#define FTDI_XF_635_PID 0xFC0D /* 635: 20x4 Character Display */ +#define FTDI_XF_640_PID 0xFC0E /* 640: Two line Display */ +#define FTDI_XF_642_PID 0xFC0F /* 642: Two line Display */ + +/* + * Video Networks Limited / Homechoice in the UK use an ftdi-based device + * for their 1Mb broadband internet service. The following PID is exhibited + * by the usb device supplied (the VID is the standard ftdi vid (FTDI_VID) + */ +#define FTDI_VNHCPCUSB_D_PID 0xfe38 /* Product Id */ + +/* AlphaMicro Components AMC-232USB01 device (FTDI_VID) */ +#define FTDI_AMC232_PID 0xFF00 /* Product Id */ + +/* + * IBS elektronik product ids (FTDI_VID) + * Submitted by Thomas Schleusener + */ +#define FTDI_IBS_US485_PID 0xff38 /* IBS US485 (USB<-->RS422/485 interface) */ +#define FTDI_IBS_PICPRO_PID 0xff39 /* IBS PIC-Programmer */ +#define FTDI_IBS_PCMCIA_PID 0xff3a /* IBS Card reader for PCMCIA SRAM-cards */ +#define FTDI_IBS_PK1_PID 0xff3b /* IBS PK1 - Particel counter */ +#define FTDI_IBS_RS232MON_PID 0xff3c /* IBS RS232 - Monitor */ +#define FTDI_IBS_APP70_PID 0xff3d /* APP 70 (dust monitoring system) */ +#define FTDI_IBS_PEDO_PID 0xff3e /* IBS PEDO-Modem (RF modem 868.35 MHz) */ +#define FTDI_IBS_PROD_PID 0xff3f /* future device */ +/* www.canusb.com Lawicel CANUSB device (FTDI_VID) */ +#define FTDI_CANUSB_PID 0xFFA8 /* Product Id */ + + + +/********************************/ +/** third-party VID/PID combos **/ +/********************************/ + + + +/* + * Atmel STK541 + */ +#define ATMEL_VID 0x03eb /* Vendor ID */ +#define STK541_PID 0x2109 /* Zigbee Controller */ + +/* + * Blackfin gnICE JTAG + * http://docs.blackfin.uclinux.org/doku.php?id=hw:jtag:gnice + */ +#define ADI_VID 0x0456 +#define ADI_GNICE_PID 0xF000 +#define ADI_GNICEPLUS_PID 0xF001 + +/* + * RATOC REX-USB60F + */ +#define RATOC_VENDOR_ID 0x0584 +#define RATOC_PRODUCT_ID_USB60F 0xb020 + +/* + * Definitions for B&B Electronics products. + */ +#define BANDB_VID 0x0856 /* B&B Electronics Vendor ID */ +#define BANDB_USOTL4_PID 0xAC01 /* USOTL4 Isolated RS-485 Converter */ +#define BANDB_USTL4_PID 0xAC02 /* USTL4 RS-485 Converter */ +#define BANDB_USO9ML2_PID 0xAC03 /* USO9ML2 Isolated RS-232 Converter */ +#define BANDB_USOPTL4_PID 0xAC11 +#define BANDB_USPTL4_PID 0xAC12 +#define BANDB_USO9ML2DR_2_PID 0xAC16 +#define BANDB_USO9ML2DR_PID 0xAC17 +#define BANDB_USOPTL4DR2_PID 0xAC18 /* USOPTL4R-2 2-port Isolated RS-232 Converter */ +#define BANDB_USOPTL4DR_PID 0xAC19 +#define BANDB_485USB9F_2W_PID 0xAC25 +#define BANDB_485USB9F_4W_PID 0xAC26 +#define BANDB_232USB9M_PID 0xAC27 +#define BANDB_485USBTB_2W_PID 0xAC33 +#define BANDB_485USBTB_4W_PID 0xAC34 +#define BANDB_TTL5USB9M_PID 0xAC49 +#define BANDB_TTL3USB9M_PID 0xAC50 +#define BANDB_ZZ_PROG1_USB_PID 0xBA02 + +/* + * Intrepid Control Systems (http://www.intrepidcs.com/) ValueCAN and NeoVI + */ +#define INTREPID_VID 0x093C +#define INTREPID_VALUECAN_PID 0x0601 +#define INTREPID_NEOVI_PID 0x0701 + +/* + * Definitions for ID TECH (www.idt-net.com) devices + */ +#define IDTECH_VID 0x0ACD /* ID TECH Vendor ID */ +#define IDTECH_IDT1221U_PID 0x0300 /* IDT1221U USB to RS-232 adapter */ + +/* + * Definitions for Omnidirectional Control Technology, Inc. devices + */ +#define OCT_VID 0x0B39 /* OCT vendor ID */ +/* Note: OCT US101 is also rebadged as Dick Smith Electronics (NZ) XH6381 */ +/* Also rebadged as Dick Smith Electronics (Aus) XH6451 */ +/* Also rebadged as SIIG Inc. model US2308 hardware version 1 */ +#define OCT_US101_PID 0x0421 /* OCT US101 USB to RS-232 */ + +/* + * Icom ID-1 digital transceiver + */ + +#define ICOM_ID1_VID 0x0C26 +#define ICOM_ID1_PID 0x0004 + +/* + * GN Otometrics (http://www.otometrics.com) + * Submitted by Ville Sundberg. + */ +#define GN_OTOMETRICS_VID 0x0c33 /* Vendor ID */ +#define AURICAL_USB_PID 0x0010 /* Aurical USB Audiometer */ + +/* + * The following are the values for the Sealevel SeaLINK+ adapters. + * (Original list sent by Tuan Hoang. Ian Abbott renamed the macros and + * removed some PIDs that don't seem to match any existing products.) + */ +#define SEALEVEL_VID 0x0c52 /* Sealevel Vendor ID */ +#define SEALEVEL_2101_PID 0x2101 /* SeaLINK+232 (2101/2105) */ +#define SEALEVEL_2102_PID 0x2102 /* SeaLINK+485 (2102) */ +#define SEALEVEL_2103_PID 0x2103 /* SeaLINK+232I (2103) */ +#define SEALEVEL_2104_PID 0x2104 /* SeaLINK+485I (2104) */ +#define SEALEVEL_2106_PID 0x9020 /* SeaLINK+422 (2106) */ +#define SEALEVEL_2201_1_PID 0x2211 /* SeaPORT+2/232 (2201) Port 1 */ +#define SEALEVEL_2201_2_PID 0x2221 /* SeaPORT+2/232 (2201) Port 2 */ +#define SEALEVEL_2202_1_PID 0x2212 /* SeaPORT+2/485 (2202) Port 1 */ +#define SEALEVEL_2202_2_PID 0x2222 /* SeaPORT+2/485 (2202) Port 2 */ +#define SEALEVEL_2203_1_PID 0x2213 /* SeaPORT+2 (2203) Port 1 */ +#define SEALEVEL_2203_2_PID 0x2223 /* SeaPORT+2 (2203) Port 2 */ +#define SEALEVEL_2401_1_PID 0x2411 /* SeaPORT+4/232 (2401) Port 1 */ +#define SEALEVEL_2401_2_PID 0x2421 /* SeaPORT+4/232 (2401) Port 2 */ +#define SEALEVEL_2401_3_PID 0x2431 /* SeaPORT+4/232 (2401) Port 3 */ +#define SEALEVEL_2401_4_PID 0x2441 /* SeaPORT+4/232 (2401) Port 4 */ +#define SEALEVEL_2402_1_PID 0x2412 /* SeaPORT+4/485 (2402) Port 1 */ +#define SEALEVEL_2402_2_PID 0x2422 /* SeaPORT+4/485 (2402) Port 2 */ +#define SEALEVEL_2402_3_PID 0x2432 /* SeaPORT+4/485 (2402) Port 3 */ +#define SEALEVEL_2402_4_PID 0x2442 /* SeaPORT+4/485 (2402) Port 4 */ +#define SEALEVEL_2403_1_PID 0x2413 /* SeaPORT+4 (2403) Port 1 */ +#define SEALEVEL_2403_2_PID 0x2423 /* SeaPORT+4 (2403) Port 2 */ +#define SEALEVEL_2403_3_PID 0x2433 /* SeaPORT+4 (2403) Port 3 */ +#define SEALEVEL_2403_4_PID 0x2443 /* SeaPORT+4 (2403) Port 4 */ +#define SEALEVEL_2801_1_PID 0X2811 /* SeaLINK+8/232 (2801) Port 1 */ +#define SEALEVEL_2801_2_PID 0X2821 /* SeaLINK+8/232 (2801) Port 2 */ +#define SEALEVEL_2801_3_PID 0X2831 /* SeaLINK+8/232 (2801) Port 3 */ +#define SEALEVEL_2801_4_PID 0X2841 /* SeaLINK+8/232 (2801) Port 4 */ +#define SEALEVEL_2801_5_PID 0X2851 /* SeaLINK+8/232 (2801) Port 5 */ +#define SEALEVEL_2801_6_PID 0X2861 /* SeaLINK+8/232 (2801) Port 6 */ +#define SEALEVEL_2801_7_PID 0X2871 /* SeaLINK+8/232 (2801) Port 7 */ +#define SEALEVEL_2801_8_PID 0X2881 /* SeaLINK+8/232 (2801) Port 8 */ +#define SEALEVEL_2802_1_PID 0X2812 /* SeaLINK+8/485 (2802) Port 1 */ +#define SEALEVEL_2802_2_PID 0X2822 /* SeaLINK+8/485 (2802) Port 2 */ +#define SEALEVEL_2802_3_PID 0X2832 /* SeaLINK+8/485 (2802) Port 3 */ +#define SEALEVEL_2802_4_PID 0X2842 /* SeaLINK+8/485 (2802) Port 4 */ +#define SEALEVEL_2802_5_PID 0X2852 /* SeaLINK+8/485 (2802) Port 5 */ +#define SEALEVEL_2802_6_PID 0X2862 /* SeaLINK+8/485 (2802) Port 6 */ +#define SEALEVEL_2802_7_PID 0X2872 /* SeaLINK+8/485 (2802) Port 7 */ +#define SEALEVEL_2802_8_PID 0X2882 /* SeaLINK+8/485 (2802) Port 8 */ +#define SEALEVEL_2803_1_PID 0X2813 /* SeaLINK+8 (2803) Port 1 */ +#define SEALEVEL_2803_2_PID 0X2823 /* SeaLINK+8 (2803) Port 2 */ +#define SEALEVEL_2803_3_PID 0X2833 /* SeaLINK+8 (2803) Port 3 */ +#define SEALEVEL_2803_4_PID 0X2843 /* SeaLINK+8 (2803) Port 4 */ +#define SEALEVEL_2803_5_PID 0X2853 /* SeaLINK+8 (2803) Port 5 */ +#define SEALEVEL_2803_6_PID 0X2863 /* SeaLINK+8 (2803) Port 6 */ +#define SEALEVEL_2803_7_PID 0X2873 /* SeaLINK+8 (2803) Port 7 */ +#define SEALEVEL_2803_8_PID 0X2883 /* SeaLINK+8 (2803) Port 8 */ + +/* + * JETI SPECTROMETER SPECBOS 1201 + * http://www.jeti.com/products/sys/scb/scb1201.php + */ +#define JETI_VID 0x0c6c +#define JETI_SPC1201_PID 0x04b2 + +/* + * FTDI USB UART chips used in construction projects from the + * Elektor Electronics magazine (http://elektor-electronics.co.uk) + */ +#define ELEKTOR_VID 0x0C7D +#define ELEKTOR_FT323R_PID 0x0005 /* RFID-Reader, issue 09-2006 */ + +/* + * Posiflex inc retail equipment (http://www.posiflex.com.tw) + */ +#define POSIFLEX_VID 0x0d3a /* Vendor ID */ +#define POSIFLEX_PP7000_PID 0x0300 /* PP-7000II thermal printer */ + +/* + * The following are the values for two KOBIL chipcard terminals. + */ +#define KOBIL_VID 0x0d46 /* KOBIL Vendor ID */ +#define KOBIL_CONV_B1_PID 0x2020 /* KOBIL Konverter for B1 */ +#define KOBIL_CONV_KAAN_PID 0x2021 /* KOBIL_Konverter for KAAN */ + +#define FTDI_NF_RIC_VID 0x0DCD /* Vendor Id */ +#define FTDI_NF_RIC_PID 0x0001 /* Product Id */ + +/* + * Falcom Wireless Communications GmbH + */ +#define FALCOM_VID 0x0F94 /* Vendor Id */ +#define FALCOM_TWIST_PID 0x0001 /* Falcom Twist USB GPRS modem */ +#define FALCOM_SAMBA_PID 0x0005 /* Falcom Samba USB GPRS modem */ + +/* Larsen and Brusgaard AltiTrack/USBtrack */ +#define LARSENBRUSGAARD_VID 0x0FD8 +#define LB_ALTITRACK_PID 0x0001 + +/* + * TTi (Thurlby Thandar Instruments) + */ +#define TTI_VID 0x103E /* Vendor Id */ +#define TTI_QL355P_PID 0x03E8 /* TTi QL355P power supply */ + +/* Interbiometrics USB I/O Board */ +/* Developed for Interbiometrics by Rudolf Gugler */ +#define INTERBIOMETRICS_VID 0x1209 +#define INTERBIOMETRICS_IOBOARD_PID 0x1002 +#define INTERBIOMETRICS_MINI_IOBOARD_PID 0x1006 + +/* + * Testo products (http://www.testo.com/) + * Submitted by Colin Leroy + */ +#define TESTO_VID 0x128D +#define TESTO_USB_INTERFACE_PID 0x0001 + +/* + * Mobility Electronics products. + */ +#define MOBILITY_VID 0x1342 +#define MOBILITY_USB_SERIAL_PID 0x0202 /* EasiDock USB 200 serial */ + +/* + * FIC / OpenMoko, Inc. http://wiki.openmoko.org/wiki/Neo1973_Debug_Board_v3 + * Submitted by Harald Welte <laforge@openmoko.org> + */ +#define FIC_VID 0x1457 +#define FIC_NEO1973_DEBUG_PID 0x5118 + +/* Olimex */ +#define OLIMEX_VID 0x15BA +#define OLIMEX_ARM_USB_OCD_PID 0x0003 + +/* + * Telldus Technologies + */ +#define TELLDUS_VID 0x1781 /* Vendor ID */ +#define TELLDUS_TELLSTICK_PID 0x0C30 /* RF control dongle 433 MHz using FT232RL */ + +/* + * Bayer Ascensia Contour blood glucose meter USB-converter cable. + * http://winglucofacts.com/cables/ + */ +#define BAYER_VID 0x1A79 +#define BAYER_CONTOUR_CABLE_PID 0x6001 + +/* + * The following are the values for the Matrix Orbital FTDI Range + * Anything in this range will use an FT232RL. + */ +#define MTXORB_VID 0x1B3D +#define MTXORB_FTDI_RANGE_0100_PID 0x0100 +#define MTXORB_FTDI_RANGE_0101_PID 0x0101 +#define MTXORB_FTDI_RANGE_0102_PID 0x0102 +#define MTXORB_FTDI_RANGE_0103_PID 0x0103 +#define MTXORB_FTDI_RANGE_0104_PID 0x0104 +#define MTXORB_FTDI_RANGE_0105_PID 0x0105 +#define MTXORB_FTDI_RANGE_0106_PID 0x0106 +#define MTXORB_FTDI_RANGE_0107_PID 0x0107 +#define MTXORB_FTDI_RANGE_0108_PID 0x0108 +#define MTXORB_FTDI_RANGE_0109_PID 0x0109 +#define MTXORB_FTDI_RANGE_010A_PID 0x010A +#define MTXORB_FTDI_RANGE_010B_PID 0x010B +#define MTXORB_FTDI_RANGE_010C_PID 0x010C +#define MTXORB_FTDI_RANGE_010D_PID 0x010D +#define MTXORB_FTDI_RANGE_010E_PID 0x010E +#define MTXORB_FTDI_RANGE_010F_PID 0x010F +#define MTXORB_FTDI_RANGE_0110_PID 0x0110 +#define MTXORB_FTDI_RANGE_0111_PID 0x0111 +#define MTXORB_FTDI_RANGE_0112_PID 0x0112 +#define MTXORB_FTDI_RANGE_0113_PID 0x0113 +#define MTXORB_FTDI_RANGE_0114_PID 0x0114 +#define MTXORB_FTDI_RANGE_0115_PID 0x0115 +#define MTXORB_FTDI_RANGE_0116_PID 0x0116 +#define MTXORB_FTDI_RANGE_0117_PID 0x0117 +#define MTXORB_FTDI_RANGE_0118_PID 0x0118 +#define MTXORB_FTDI_RANGE_0119_PID 0x0119 +#define MTXORB_FTDI_RANGE_011A_PID 0x011A +#define MTXORB_FTDI_RANGE_011B_PID 0x011B +#define MTXORB_FTDI_RANGE_011C_PID 0x011C +#define MTXORB_FTDI_RANGE_011D_PID 0x011D +#define MTXORB_FTDI_RANGE_011E_PID 0x011E +#define MTXORB_FTDI_RANGE_011F_PID 0x011F +#define MTXORB_FTDI_RANGE_0120_PID 0x0120 +#define MTXORB_FTDI_RANGE_0121_PID 0x0121 +#define MTXORB_FTDI_RANGE_0122_PID 0x0122 +#define MTXORB_FTDI_RANGE_0123_PID 0x0123 +#define MTXORB_FTDI_RANGE_0124_PID 0x0124 +#define MTXORB_FTDI_RANGE_0125_PID 0x0125 +#define MTXORB_FTDI_RANGE_0126_PID 0x0126 +#define MTXORB_FTDI_RANGE_0127_PID 0x0127 +#define MTXORB_FTDI_RANGE_0128_PID 0x0128 +#define MTXORB_FTDI_RANGE_0129_PID 0x0129 +#define MTXORB_FTDI_RANGE_012A_PID 0x012A +#define MTXORB_FTDI_RANGE_012B_PID 0x012B +#define MTXORB_FTDI_RANGE_012C_PID 0x012C +#define MTXORB_FTDI_RANGE_012D_PID 0x012D +#define MTXORB_FTDI_RANGE_012E_PID 0x012E +#define MTXORB_FTDI_RANGE_012F_PID 0x012F +#define MTXORB_FTDI_RANGE_0130_PID 0x0130 +#define MTXORB_FTDI_RANGE_0131_PID 0x0131 +#define MTXORB_FTDI_RANGE_0132_PID 0x0132 +#define MTXORB_FTDI_RANGE_0133_PID 0x0133 +#define MTXORB_FTDI_RANGE_0134_PID 0x0134 +#define MTXORB_FTDI_RANGE_0135_PID 0x0135 +#define MTXORB_FTDI_RANGE_0136_PID 0x0136 +#define MTXORB_FTDI_RANGE_0137_PID 0x0137 +#define MTXORB_FTDI_RANGE_0138_PID 0x0138 +#define MTXORB_FTDI_RANGE_0139_PID 0x0139 +#define MTXORB_FTDI_RANGE_013A_PID 0x013A +#define MTXORB_FTDI_RANGE_013B_PID 0x013B +#define MTXORB_FTDI_RANGE_013C_PID 0x013C +#define MTXORB_FTDI_RANGE_013D_PID 0x013D +#define MTXORB_FTDI_RANGE_013E_PID 0x013E +#define MTXORB_FTDI_RANGE_013F_PID 0x013F +#define MTXORB_FTDI_RANGE_0140_PID 0x0140 +#define MTXORB_FTDI_RANGE_0141_PID 0x0141 +#define MTXORB_FTDI_RANGE_0142_PID 0x0142 +#define MTXORB_FTDI_RANGE_0143_PID 0x0143 +#define MTXORB_FTDI_RANGE_0144_PID 0x0144 +#define MTXORB_FTDI_RANGE_0145_PID 0x0145 +#define MTXORB_FTDI_RANGE_0146_PID 0x0146 +#define MTXORB_FTDI_RANGE_0147_PID 0x0147 +#define MTXORB_FTDI_RANGE_0148_PID 0x0148 +#define MTXORB_FTDI_RANGE_0149_PID 0x0149 +#define MTXORB_FTDI_RANGE_014A_PID 0x014A +#define MTXORB_FTDI_RANGE_014B_PID 0x014B +#define MTXORB_FTDI_RANGE_014C_PID 0x014C +#define MTXORB_FTDI_RANGE_014D_PID 0x014D +#define MTXORB_FTDI_RANGE_014E_PID 0x014E +#define MTXORB_FTDI_RANGE_014F_PID 0x014F +#define MTXORB_FTDI_RANGE_0150_PID 0x0150 +#define MTXORB_FTDI_RANGE_0151_PID 0x0151 +#define MTXORB_FTDI_RANGE_0152_PID 0x0152 +#define MTXORB_FTDI_RANGE_0153_PID 0x0153 +#define MTXORB_FTDI_RANGE_0154_PID 0x0154 +#define MTXORB_FTDI_RANGE_0155_PID 0x0155 +#define MTXORB_FTDI_RANGE_0156_PID 0x0156 +#define MTXORB_FTDI_RANGE_0157_PID 0x0157 +#define MTXORB_FTDI_RANGE_0158_PID 0x0158 +#define MTXORB_FTDI_RANGE_0159_PID 0x0159 +#define MTXORB_FTDI_RANGE_015A_PID 0x015A +#define MTXORB_FTDI_RANGE_015B_PID 0x015B +#define MTXORB_FTDI_RANGE_015C_PID 0x015C +#define MTXORB_FTDI_RANGE_015D_PID 0x015D +#define MTXORB_FTDI_RANGE_015E_PID 0x015E +#define MTXORB_FTDI_RANGE_015F_PID 0x015F +#define MTXORB_FTDI_RANGE_0160_PID 0x0160 +#define MTXORB_FTDI_RANGE_0161_PID 0x0161 +#define MTXORB_FTDI_RANGE_0162_PID 0x0162 +#define MTXORB_FTDI_RANGE_0163_PID 0x0163 +#define MTXORB_FTDI_RANGE_0164_PID 0x0164 +#define MTXORB_FTDI_RANGE_0165_PID 0x0165 +#define MTXORB_FTDI_RANGE_0166_PID 0x0166 +#define MTXORB_FTDI_RANGE_0167_PID 0x0167 +#define MTXORB_FTDI_RANGE_0168_PID 0x0168 +#define MTXORB_FTDI_RANGE_0169_PID 0x0169 +#define MTXORB_FTDI_RANGE_016A_PID 0x016A +#define MTXORB_FTDI_RANGE_016B_PID 0x016B +#define MTXORB_FTDI_RANGE_016C_PID 0x016C +#define MTXORB_FTDI_RANGE_016D_PID 0x016D +#define MTXORB_FTDI_RANGE_016E_PID 0x016E +#define MTXORB_FTDI_RANGE_016F_PID 0x016F +#define MTXORB_FTDI_RANGE_0170_PID 0x0170 +#define MTXORB_FTDI_RANGE_0171_PID 0x0171 +#define MTXORB_FTDI_RANGE_0172_PID 0x0172 +#define MTXORB_FTDI_RANGE_0173_PID 0x0173 +#define MTXORB_FTDI_RANGE_0174_PID 0x0174 +#define MTXORB_FTDI_RANGE_0175_PID 0x0175 +#define MTXORB_FTDI_RANGE_0176_PID 0x0176 +#define MTXORB_FTDI_RANGE_0177_PID 0x0177 +#define MTXORB_FTDI_RANGE_0178_PID 0x0178 +#define MTXORB_FTDI_RANGE_0179_PID 0x0179 +#define MTXORB_FTDI_RANGE_017A_PID 0x017A +#define MTXORB_FTDI_RANGE_017B_PID 0x017B +#define MTXORB_FTDI_RANGE_017C_PID 0x017C +#define MTXORB_FTDI_RANGE_017D_PID 0x017D +#define MTXORB_FTDI_RANGE_017E_PID 0x017E +#define MTXORB_FTDI_RANGE_017F_PID 0x017F +#define MTXORB_FTDI_RANGE_0180_PID 0x0180 +#define MTXORB_FTDI_RANGE_0181_PID 0x0181 +#define MTXORB_FTDI_RANGE_0182_PID 0x0182 +#define MTXORB_FTDI_RANGE_0183_PID 0x0183 +#define MTXORB_FTDI_RANGE_0184_PID 0x0184 +#define MTXORB_FTDI_RANGE_0185_PID 0x0185 +#define MTXORB_FTDI_RANGE_0186_PID 0x0186 +#define MTXORB_FTDI_RANGE_0187_PID 0x0187 +#define MTXORB_FTDI_RANGE_0188_PID 0x0188 +#define MTXORB_FTDI_RANGE_0189_PID 0x0189 +#define MTXORB_FTDI_RANGE_018A_PID 0x018A +#define MTXORB_FTDI_RANGE_018B_PID 0x018B +#define MTXORB_FTDI_RANGE_018C_PID 0x018C +#define MTXORB_FTDI_RANGE_018D_PID 0x018D +#define MTXORB_FTDI_RANGE_018E_PID 0x018E +#define MTXORB_FTDI_RANGE_018F_PID 0x018F +#define MTXORB_FTDI_RANGE_0190_PID 0x0190 +#define MTXORB_FTDI_RANGE_0191_PID 0x0191 +#define MTXORB_FTDI_RANGE_0192_PID 0x0192 +#define MTXORB_FTDI_RANGE_0193_PID 0x0193 +#define MTXORB_FTDI_RANGE_0194_PID 0x0194 +#define MTXORB_FTDI_RANGE_0195_PID 0x0195 +#define MTXORB_FTDI_RANGE_0196_PID 0x0196 +#define MTXORB_FTDI_RANGE_0197_PID 0x0197 +#define MTXORB_FTDI_RANGE_0198_PID 0x0198 +#define MTXORB_FTDI_RANGE_0199_PID 0x0199 +#define MTXORB_FTDI_RANGE_019A_PID 0x019A +#define MTXORB_FTDI_RANGE_019B_PID 0x019B +#define MTXORB_FTDI_RANGE_019C_PID 0x019C +#define MTXORB_FTDI_RANGE_019D_PID 0x019D +#define MTXORB_FTDI_RANGE_019E_PID 0x019E +#define MTXORB_FTDI_RANGE_019F_PID 0x019F +#define MTXORB_FTDI_RANGE_01A0_PID 0x01A0 +#define MTXORB_FTDI_RANGE_01A1_PID 0x01A1 +#define MTXORB_FTDI_RANGE_01A2_PID 0x01A2 +#define MTXORB_FTDI_RANGE_01A3_PID 0x01A3 +#define MTXORB_FTDI_RANGE_01A4_PID 0x01A4 +#define MTXORB_FTDI_RANGE_01A5_PID 0x01A5 +#define MTXORB_FTDI_RANGE_01A6_PID 0x01A6 +#define MTXORB_FTDI_RANGE_01A7_PID 0x01A7 +#define MTXORB_FTDI_RANGE_01A8_PID 0x01A8 +#define MTXORB_FTDI_RANGE_01A9_PID 0x01A9 +#define MTXORB_FTDI_RANGE_01AA_PID 0x01AA +#define MTXORB_FTDI_RANGE_01AB_PID 0x01AB +#define MTXORB_FTDI_RANGE_01AC_PID 0x01AC +#define MTXORB_FTDI_RANGE_01AD_PID 0x01AD +#define MTXORB_FTDI_RANGE_01AE_PID 0x01AE +#define MTXORB_FTDI_RANGE_01AF_PID 0x01AF +#define MTXORB_FTDI_RANGE_01B0_PID 0x01B0 +#define MTXORB_FTDI_RANGE_01B1_PID 0x01B1 +#define MTXORB_FTDI_RANGE_01B2_PID 0x01B2 +#define MTXORB_FTDI_RANGE_01B3_PID 0x01B3 +#define MTXORB_FTDI_RANGE_01B4_PID 0x01B4 +#define MTXORB_FTDI_RANGE_01B5_PID 0x01B5 +#define MTXORB_FTDI_RANGE_01B6_PID 0x01B6 +#define MTXORB_FTDI_RANGE_01B7_PID 0x01B7 +#define MTXORB_FTDI_RANGE_01B8_PID 0x01B8 +#define MTXORB_FTDI_RANGE_01B9_PID 0x01B9 +#define MTXORB_FTDI_RANGE_01BA_PID 0x01BA +#define MTXORB_FTDI_RANGE_01BB_PID 0x01BB +#define MTXORB_FTDI_RANGE_01BC_PID 0x01BC +#define MTXORB_FTDI_RANGE_01BD_PID 0x01BD +#define MTXORB_FTDI_RANGE_01BE_PID 0x01BE +#define MTXORB_FTDI_RANGE_01BF_PID 0x01BF +#define MTXORB_FTDI_RANGE_01C0_PID 0x01C0 +#define MTXORB_FTDI_RANGE_01C1_PID 0x01C1 +#define MTXORB_FTDI_RANGE_01C2_PID 0x01C2 +#define MTXORB_FTDI_RANGE_01C3_PID 0x01C3 +#define MTXORB_FTDI_RANGE_01C4_PID 0x01C4 +#define MTXORB_FTDI_RANGE_01C5_PID 0x01C5 +#define MTXORB_FTDI_RANGE_01C6_PID 0x01C6 +#define MTXORB_FTDI_RANGE_01C7_PID 0x01C7 +#define MTXORB_FTDI_RANGE_01C8_PID 0x01C8 +#define MTXORB_FTDI_RANGE_01C9_PID 0x01C9 +#define MTXORB_FTDI_RANGE_01CA_PID 0x01CA +#define MTXORB_FTDI_RANGE_01CB_PID 0x01CB +#define MTXORB_FTDI_RANGE_01CC_PID 0x01CC +#define MTXORB_FTDI_RANGE_01CD_PID 0x01CD +#define MTXORB_FTDI_RANGE_01CE_PID 0x01CE +#define MTXORB_FTDI_RANGE_01CF_PID 0x01CF +#define MTXORB_FTDI_RANGE_01D0_PID 0x01D0 +#define MTXORB_FTDI_RANGE_01D1_PID 0x01D1 +#define MTXORB_FTDI_RANGE_01D2_PID 0x01D2 +#define MTXORB_FTDI_RANGE_01D3_PID 0x01D3 +#define MTXORB_FTDI_RANGE_01D4_PID 0x01D4 +#define MTXORB_FTDI_RANGE_01D5_PID 0x01D5 +#define MTXORB_FTDI_RANGE_01D6_PID 0x01D6 +#define MTXORB_FTDI_RANGE_01D7_PID 0x01D7 +#define MTXORB_FTDI_RANGE_01D8_PID 0x01D8 +#define MTXORB_FTDI_RANGE_01D9_PID 0x01D9 +#define MTXORB_FTDI_RANGE_01DA_PID 0x01DA +#define MTXORB_FTDI_RANGE_01DB_PID 0x01DB +#define MTXORB_FTDI_RANGE_01DC_PID 0x01DC +#define MTXORB_FTDI_RANGE_01DD_PID 0x01DD +#define MTXORB_FTDI_RANGE_01DE_PID 0x01DE +#define MTXORB_FTDI_RANGE_01DF_PID 0x01DF +#define MTXORB_FTDI_RANGE_01E0_PID 0x01E0 +#define MTXORB_FTDI_RANGE_01E1_PID 0x01E1 +#define MTXORB_FTDI_RANGE_01E2_PID 0x01E2 +#define MTXORB_FTDI_RANGE_01E3_PID 0x01E3 +#define MTXORB_FTDI_RANGE_01E4_PID 0x01E4 +#define MTXORB_FTDI_RANGE_01E5_PID 0x01E5 +#define MTXORB_FTDI_RANGE_01E6_PID 0x01E6 +#define MTXORB_FTDI_RANGE_01E7_PID 0x01E7 +#define MTXORB_FTDI_RANGE_01E8_PID 0x01E8 +#define MTXORB_FTDI_RANGE_01E9_PID 0x01E9 +#define MTXORB_FTDI_RANGE_01EA_PID 0x01EA +#define MTXORB_FTDI_RANGE_01EB_PID 0x01EB +#define MTXORB_FTDI_RANGE_01EC_PID 0x01EC +#define MTXORB_FTDI_RANGE_01ED_PID 0x01ED +#define MTXORB_FTDI_RANGE_01EE_PID 0x01EE +#define MTXORB_FTDI_RANGE_01EF_PID 0x01EF +#define MTXORB_FTDI_RANGE_01F0_PID 0x01F0 +#define MTXORB_FTDI_RANGE_01F1_PID 0x01F1 +#define MTXORB_FTDI_RANGE_01F2_PID 0x01F2 +#define MTXORB_FTDI_RANGE_01F3_PID 0x01F3 +#define MTXORB_FTDI_RANGE_01F4_PID 0x01F4 +#define MTXORB_FTDI_RANGE_01F5_PID 0x01F5 +#define MTXORB_FTDI_RANGE_01F6_PID 0x01F6 +#define MTXORB_FTDI_RANGE_01F7_PID 0x01F7 +#define MTXORB_FTDI_RANGE_01F8_PID 0x01F8 +#define MTXORB_FTDI_RANGE_01F9_PID 0x01F9 +#define MTXORB_FTDI_RANGE_01FA_PID 0x01FA +#define MTXORB_FTDI_RANGE_01FB_PID 0x01FB +#define MTXORB_FTDI_RANGE_01FC_PID 0x01FC +#define MTXORB_FTDI_RANGE_01FD_PID 0x01FD +#define MTXORB_FTDI_RANGE_01FE_PID 0x01FE +#define MTXORB_FTDI_RANGE_01FF_PID 0x01FF + + + +/* + * The Mobility Lab (TML) + * Submitted by Pierre Castella + */ +#define TML_VID 0x1B91 /* Vendor ID */ +#define TML_USB_SERIAL_PID 0x0064 /* USB - Serial Converter */ + +/* Alti-2 products http://www.alti-2.com */ +#define ALTI2_VID 0x1BC9 +#define ALTI2_N3_PID 0x6001 /* Neptune 3 */ + +/* + * Dresden Elektronic Sensor Terminal Board + */ +#define DE_VID 0x1cf1 /* Vendor ID */ +#define STB_PID 0x0001 /* Sensor Terminal Board */ +#define WHT_PID 0x0004 /* Wireless Handheld Terminal */ + +/* + * Papouch products (http://www.papouch.com/) + * Submitted by Folkert van Heusden + */ + +#define PAPOUCH_VID 0x5050 /* Vendor ID */ +#define PAPOUCH_TMU_PID 0x0400 /* TMU USB Thermometer */ +#define PAPOUCH_QUIDO4x4_PID 0x0900 /* Quido 4/4 Module */ + +/* + * Marvell SheevaPlug + */ +#define MARVELL_VID 0x9e88 +#define MARVELL_SHEEVAPLUG_PID 0x9e8f + +/* + * Evolution Robotics products (http://www.evolution.com/). + * Submitted by Shawn M. Lavelle. + */ +#define EVOLUTION_VID 0xDEEE /* Vendor ID */ +#define EVOLUTION_ER1_PID 0x0300 /* ER1 Control Module */ +#define EVO_8U232AM_PID 0x02FF /* Evolution robotics RCM2 (FT232AM)*/ +#define EVO_HYBRID_PID 0x0302 /* Evolution robotics RCM4 PID (FT232BM)*/ +#define EVO_RCM4_PID 0x0303 /* Evolution robotics RCM4 PID */ diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c index bbe005cefcfb..f1ea3a33b6e6 100644 --- a/drivers/usb/serial/generic.c +++ b/drivers/usb/serial/generic.c @@ -276,7 +276,7 @@ static int usb_serial_generic_write_start(struct usb_serial_port *port) if (port->write_urb_busy) start_io = false; else { - start_io = (__kfifo_len(port->write_fifo) != 0); + start_io = (kfifo_len(&port->write_fifo) != 0); port->write_urb_busy = start_io; } spin_unlock_irqrestore(&port->lock, flags); @@ -285,7 +285,7 @@ static int usb_serial_generic_write_start(struct usb_serial_port *port) return 0; data = port->write_urb->transfer_buffer; - count = kfifo_get(port->write_fifo, data, port->bulk_out_size); + count = kfifo_out_locked(&port->write_fifo, data, port->bulk_out_size, &port->lock); usb_serial_debug_data(debug, &port->dev, __func__, count, data); /* set up our urb */ @@ -345,7 +345,7 @@ int usb_serial_generic_write(struct tty_struct *tty, return usb_serial_multi_urb_write(tty, port, buf, count); - count = kfifo_put(port->write_fifo, buf, count); + count = kfifo_in_locked(&port->write_fifo, buf, count, &port->lock); result = usb_serial_generic_write_start(port); if (result >= 0) @@ -370,7 +370,7 @@ int usb_serial_generic_write_room(struct tty_struct *tty) (serial->type->max_in_flight_urbs - port->urbs_in_flight); } else if (serial->num_bulk_out) - room = port->write_fifo->size - __kfifo_len(port->write_fifo); + room = kfifo_avail(&port->write_fifo); spin_unlock_irqrestore(&port->lock, flags); dbg("%s - returns %d", __func__, room); @@ -391,7 +391,7 @@ int usb_serial_generic_chars_in_buffer(struct tty_struct *tty) chars = port->tx_bytes_flight; spin_unlock_irqrestore(&port->lock, flags); } else if (serial->num_bulk_out) - chars = kfifo_len(port->write_fifo); + chars = kfifo_len(&port->write_fifo); dbg("%s - returns %d", __func__, chars); return chars; @@ -507,7 +507,7 @@ void usb_serial_generic_write_bulk_callback(struct urb *urb) if (status) { dbg("%s - nonzero multi-urb write bulk status " "received: %d", __func__, status); - kfifo_reset(port->write_fifo); + kfifo_reset_out(&port->write_fifo); } else usb_serial_generic_write_start(port); } diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index 485fa9c5b107..2cfe2451ed97 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -127,8 +127,9 @@ #define BANDB_DEVICE_ID_US9ML2_4 0xAC30 #define BANDB_DEVICE_ID_USPTL4_2 0xAC31 #define BANDB_DEVICE_ID_USPTL4_4 0xAC32 -#define BANDB_DEVICE_ID_USOPTL4_2 0xAC42 -#define BANDB_DEVICE_ID_USOPTL4_4 0xAC44 +#define BANDB_DEVICE_ID_USOPTL4_2 0xAC42 +#define BANDB_DEVICE_ID_USOPTL4_4 0xAC44 +#define BANDB_DEVICE_ID_USOPTL2_4 0xAC24 /* This driver also supports * ATEN UC2324 device using Moschip MCS7840 @@ -191,6 +192,7 @@ static struct usb_device_id moschip_port_id_table[] = { {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USPTL4_4)}, {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_2)}, {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4)}, + {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL2_4)}, {USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2324)}, {USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2322)}, {} /* terminating entry */ @@ -207,6 +209,7 @@ static __devinitdata struct usb_device_id moschip_id_table_combined[] = { {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USPTL4_4)}, {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_2)}, {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4)}, + {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL2_4)}, {USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2324)}, {USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2322)}, {} /* terminating entry */ diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 9a2b903492ec..6e94a6711f08 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -340,6 +340,10 @@ static int option_resume(struct usb_serial *serial); #define FOUR_G_SYSTEMS_VENDOR_ID 0x1c9e #define FOUR_G_SYSTEMS_PRODUCT_W14 0x9603 +/* Haier products */ +#define HAIER_VENDOR_ID 0x201e +#define HAIER_PRODUCT_CE100 0x2009 + static struct usb_device_id option_ids[] = { { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) }, { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) }, @@ -641,6 +645,7 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE(AIRPLUS_VENDOR_ID, AIRPLUS_PRODUCT_MCD650) }, { USB_DEVICE(TLAYTECH_VENDOR_ID, TLAYTECH_PRODUCT_TEU800) }, { USB_DEVICE(FOUR_G_SYSTEMS_VENDOR_ID, FOUR_G_SYSTEMS_PRODUCT_W14) }, + { USB_DEVICE(HAIER_VENDOR_ID, HAIER_PRODUCT_CE100) }, { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, option_ids); diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 4543f359be75..33c85f7084f8 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -595,8 +595,7 @@ static void port_release(struct device *dev) usb_free_urb(port->write_urb); usb_free_urb(port->interrupt_in_urb); usb_free_urb(port->interrupt_out_urb); - if (!IS_ERR(port->write_fifo) && port->write_fifo) - kfifo_free(port->write_fifo); + kfifo_free(&port->write_fifo); kfree(port->bulk_in_buffer); kfree(port->bulk_out_buffer); kfree(port->interrupt_in_buffer); @@ -939,9 +938,7 @@ int usb_serial_probe(struct usb_interface *interface, dev_err(&interface->dev, "No free urbs available\n"); goto probe_error; } - port->write_fifo = kfifo_alloc(PAGE_SIZE, GFP_KERNEL, - &port->lock); - if (IS_ERR(port->write_fifo)) + if (kfifo_alloc(&port->write_fifo, PAGE_SIZE, GFP_KERNEL)) goto probe_error; buffer_size = le16_to_cpu(endpoint->wMaxPacketSize); port->bulk_out_size = buffer_size; diff --git a/drivers/video/atafb.c b/drivers/video/atafb.c index 2051c9dc813b..b7687c55fe16 100644 --- a/drivers/video/atafb.c +++ b/drivers/video/atafb.c @@ -2245,9 +2245,6 @@ static int ext_setcolreg(unsigned int regno, unsigned int red, if (regno > 255) return 1; - if (regno > 255) - return 1; - switch (external_card_type) { case IS_VGA: OUTB(0x3c8, regno); diff --git a/drivers/video/backlight/adp5520_bl.c b/drivers/video/backlight/adp5520_bl.c index 4c10edecfb66..86d95c228adb 100644 --- a/drivers/video/backlight/adp5520_bl.c +++ b/drivers/video/backlight/adp5520_bl.c @@ -85,7 +85,7 @@ static int adp5520_bl_get_brightness(struct backlight_device *bl) return error ? data->current_brightness : reg_val; } -static struct backlight_ops adp5520_bl_ops = { +static const struct backlight_ops adp5520_bl_ops = { .update_status = adp5520_bl_update_status, .get_brightness = adp5520_bl_get_brightness, }; diff --git a/drivers/video/backlight/adx_bl.c b/drivers/video/backlight/adx_bl.c index 2c3bdfc620b7..d769b0bab21a 100644 --- a/drivers/video/backlight/adx_bl.c +++ b/drivers/video/backlight/adx_bl.c @@ -61,7 +61,7 @@ static int adx_backlight_check_fb(struct fb_info *fb) return 1; } -static struct backlight_ops adx_backlight_ops = { +static const struct backlight_ops adx_backlight_ops = { .options = 0, .update_status = adx_backlight_update_status, .get_brightness = adx_backlight_get_brightness, diff --git a/drivers/video/backlight/atmel-pwm-bl.c b/drivers/video/backlight/atmel-pwm-bl.c index 2cf7ba52f67c..f625ffc69ad3 100644 --- a/drivers/video/backlight/atmel-pwm-bl.c +++ b/drivers/video/backlight/atmel-pwm-bl.c @@ -113,7 +113,7 @@ static int atmel_pwm_bl_init_pwm(struct atmel_pwm_bl *pwmbl) return pwm_channel_enable(&pwmbl->pwmc); } -static struct backlight_ops atmel_pwm_bl_ops = { +static const struct backlight_ops atmel_pwm_bl_ops = { .get_brightness = atmel_pwm_bl_get_intensity, .update_status = atmel_pwm_bl_set_intensity, }; diff --git a/drivers/video/backlight/backlight.c b/drivers/video/backlight/backlight.c index 6615ac7fa60a..18829cf68b1b 100644 --- a/drivers/video/backlight/backlight.c +++ b/drivers/video/backlight/backlight.c @@ -269,7 +269,7 @@ EXPORT_SYMBOL(backlight_force_update); * ERR_PTR() or a pointer to the newly allocated device. */ struct backlight_device *backlight_device_register(const char *name, - struct device *parent, void *devdata, struct backlight_ops *ops) + struct device *parent, void *devdata, const struct backlight_ops *ops) { struct backlight_device *new_bd; int rc; diff --git a/drivers/video/backlight/corgi_lcd.c b/drivers/video/backlight/corgi_lcd.c index 96774949cd30..b4bcf8043797 100644 --- a/drivers/video/backlight/corgi_lcd.c +++ b/drivers/video/backlight/corgi_lcd.c @@ -451,7 +451,7 @@ void corgi_lcd_limit_intensity(int limit) } EXPORT_SYMBOL(corgi_lcd_limit_intensity); -static struct backlight_ops corgi_bl_ops = { +static const struct backlight_ops corgi_bl_ops = { .get_brightness = corgi_bl_get_intensity, .update_status = corgi_bl_update_status, }; diff --git a/drivers/video/backlight/cr_bllcd.c b/drivers/video/backlight/cr_bllcd.c index b9fe62b475c6..da86db4374a0 100644 --- a/drivers/video/backlight/cr_bllcd.c +++ b/drivers/video/backlight/cr_bllcd.c @@ -108,7 +108,7 @@ static int cr_backlight_get_intensity(struct backlight_device *bd) return intensity; } -static struct backlight_ops cr_backlight_ops = { +static const struct backlight_ops cr_backlight_ops = { .get_brightness = cr_backlight_get_intensity, .update_status = cr_backlight_set_intensity, }; @@ -201,7 +201,7 @@ static int cr_backlight_probe(struct platform_device *pdev) if (IS_ERR(ldp)) { backlight_device_unregister(bdp); pci_dev_put(lpc_dev); - return PTR_ERR(bdp); + return PTR_ERR(ldp); } pci_read_config_dword(lpc_dev, CRVML_REG_GPIOBAR, diff --git a/drivers/video/backlight/da903x_bl.c b/drivers/video/backlight/da903x_bl.c index f2d76dae1eb3..74cdc640173d 100644 --- a/drivers/video/backlight/da903x_bl.c +++ b/drivers/video/backlight/da903x_bl.c @@ -95,7 +95,7 @@ static int da903x_backlight_get_brightness(struct backlight_device *bl) return data->current_brightness; } -static struct backlight_ops da903x_backlight_ops = { +static const struct backlight_ops da903x_backlight_ops = { .update_status = da903x_backlight_update_status, .get_brightness = da903x_backlight_get_brightness, }; diff --git a/drivers/video/backlight/generic_bl.c b/drivers/video/backlight/generic_bl.c index 6d27f62fdcd0..e6d348e63596 100644 --- a/drivers/video/backlight/generic_bl.c +++ b/drivers/video/backlight/generic_bl.c @@ -70,7 +70,7 @@ void corgibl_limit_intensity(int limit) } EXPORT_SYMBOL(corgibl_limit_intensity); -static struct backlight_ops genericbl_ops = { +static const struct backlight_ops genericbl_ops = { .options = BL_CORE_SUSPENDRESUME, .get_brightness = genericbl_get_intensity, .update_status = genericbl_send_intensity, diff --git a/drivers/video/backlight/hp680_bl.c b/drivers/video/backlight/hp680_bl.c index 7fb4eefff80d..f7cc528d5be7 100644 --- a/drivers/video/backlight/hp680_bl.c +++ b/drivers/video/backlight/hp680_bl.c @@ -98,7 +98,7 @@ static int hp680bl_get_intensity(struct backlight_device *bd) return current_intensity; } -static struct backlight_ops hp680bl_ops = { +static const struct backlight_ops hp680bl_ops = { .get_brightness = hp680bl_get_intensity, .update_status = hp680bl_set_intensity, }; diff --git a/drivers/video/backlight/jornada720_bl.c b/drivers/video/backlight/jornada720_bl.c index 7aed2565c1bd..db9071fc5665 100644 --- a/drivers/video/backlight/jornada720_bl.c +++ b/drivers/video/backlight/jornada720_bl.c @@ -93,7 +93,7 @@ out: return ret; } -static struct backlight_ops jornada_bl_ops = { +static const struct backlight_ops jornada_bl_ops = { .get_brightness = jornada_bl_get_brightness, .update_status = jornada_bl_update_status, .options = BL_CORE_SUSPENDRESUME, diff --git a/drivers/video/backlight/kb3886_bl.c b/drivers/video/backlight/kb3886_bl.c index a38fda1742dd..939e7b830cf3 100644 --- a/drivers/video/backlight/kb3886_bl.c +++ b/drivers/video/backlight/kb3886_bl.c @@ -134,7 +134,7 @@ static int kb3886bl_get_intensity(struct backlight_device *bd) return kb3886bl_intensity; } -static struct backlight_ops kb3886bl_ops = { +static const struct backlight_ops kb3886bl_ops = { .get_brightness = kb3886bl_get_intensity, .update_status = kb3886bl_send_intensity, }; diff --git a/drivers/video/backlight/locomolcd.c b/drivers/video/backlight/locomolcd.c index 6b488b8a7eee..00a9591b0003 100644 --- a/drivers/video/backlight/locomolcd.c +++ b/drivers/video/backlight/locomolcd.c @@ -141,7 +141,7 @@ static int locomolcd_get_intensity(struct backlight_device *bd) return current_intensity; } -static struct backlight_ops locomobl_data = { +static const struct backlight_ops locomobl_data = { .get_brightness = locomolcd_get_intensity, .update_status = locomolcd_set_intensity, }; diff --git a/drivers/video/backlight/mbp_nvidia_bl.c b/drivers/video/backlight/mbp_nvidia_bl.c index 9edb8d7c295f..2e78b0784bdc 100644 --- a/drivers/video/backlight/mbp_nvidia_bl.c +++ b/drivers/video/backlight/mbp_nvidia_bl.c @@ -33,7 +33,7 @@ struct dmi_match_data { unsigned long iostart; unsigned long iolen; /* Backlight operations structure. */ - struct backlight_ops backlight_ops; + const struct backlight_ops backlight_ops; }; /* Module parameters. */ @@ -220,6 +220,24 @@ static const struct dmi_system_id __initdata mbp_device_table[] = { }, { .callback = mbp_dmi_match, + .ident = "MacBookPro 5,3", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro5,3"), + }, + .driver_data = (void *)&nvidia_chipset_data, + }, + { + .callback = mbp_dmi_match, + .ident = "MacBookPro 5,4", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro5,4"), + }, + .driver_data = (void *)&nvidia_chipset_data, + }, + { + .callback = mbp_dmi_match, .ident = "MacBookPro 5,5", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."), diff --git a/drivers/video/backlight/omap1_bl.c b/drivers/video/backlight/omap1_bl.c index 8693e5fcd2eb..409ca9643528 100644 --- a/drivers/video/backlight/omap1_bl.c +++ b/drivers/video/backlight/omap1_bl.c @@ -125,7 +125,7 @@ static int omapbl_get_intensity(struct backlight_device *dev) return bl->current_intensity; } -static struct backlight_ops omapbl_ops = { +static const struct backlight_ops omapbl_ops = { .get_brightness = omapbl_get_intensity, .update_status = omapbl_update_status, }; diff --git a/drivers/video/backlight/progear_bl.c b/drivers/video/backlight/progear_bl.c index 9edaf24fd82d..075786e05034 100644 --- a/drivers/video/backlight/progear_bl.c +++ b/drivers/video/backlight/progear_bl.c @@ -54,7 +54,7 @@ static int progearbl_get_intensity(struct backlight_device *bd) return intensity - HW_LEVEL_MIN; } -static struct backlight_ops progearbl_ops = { +static const struct backlight_ops progearbl_ops = { .get_brightness = progearbl_get_intensity, .update_status = progearbl_set_intensity, }; diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c index 887166267443..9d2ec2a1cce8 100644 --- a/drivers/video/backlight/pwm_bl.c +++ b/drivers/video/backlight/pwm_bl.c @@ -22,8 +22,10 @@ struct pwm_bl_data { struct pwm_device *pwm; + struct device *dev; unsigned int period; - int (*notify)(int brightness); + int (*notify)(struct device *, + int brightness); }; static int pwm_backlight_update_status(struct backlight_device *bl) @@ -39,7 +41,7 @@ static int pwm_backlight_update_status(struct backlight_device *bl) brightness = 0; if (pb->notify) - brightness = pb->notify(brightness); + brightness = pb->notify(pb->dev, brightness); if (brightness == 0) { pwm_config(pb->pwm, 0, pb->period); @@ -56,7 +58,7 @@ static int pwm_backlight_get_brightness(struct backlight_device *bl) return bl->props.brightness; } -static struct backlight_ops pwm_backlight_ops = { +static const struct backlight_ops pwm_backlight_ops = { .update_status = pwm_backlight_update_status, .get_brightness = pwm_backlight_get_brightness, }; @@ -88,6 +90,7 @@ static int pwm_backlight_probe(struct platform_device *pdev) pb->period = data->pwm_period_ns; pb->notify = data->notify; + pb->dev = &pdev->dev; pb->pwm = pwm_request(data->pwm_id, "backlight"); if (IS_ERR(pb->pwm)) { @@ -146,7 +149,7 @@ static int pwm_backlight_suspend(struct platform_device *pdev, struct pwm_bl_data *pb = dev_get_drvdata(&bl->dev); if (pb->notify) - pb->notify(0); + pb->notify(pb->dev, 0); pwm_config(pb->pwm, 0, pb->period); pwm_disable(pb->pwm); return 0; diff --git a/drivers/video/backlight/tosa_bl.c b/drivers/video/backlight/tosa_bl.c index 43edbada12d1..e14ce4d469f5 100644 --- a/drivers/video/backlight/tosa_bl.c +++ b/drivers/video/backlight/tosa_bl.c @@ -72,7 +72,7 @@ static int tosa_bl_get_brightness(struct backlight_device *dev) return props->brightness; } -static struct backlight_ops bl_ops = { +static const struct backlight_ops bl_ops = { .get_brightness = tosa_bl_get_brightness, .update_status = tosa_bl_update_status, }; diff --git a/drivers/video/backlight/wm831x_bl.c b/drivers/video/backlight/wm831x_bl.c index 467bdb7efb23..e32add37a203 100644 --- a/drivers/video/backlight/wm831x_bl.c +++ b/drivers/video/backlight/wm831x_bl.c @@ -112,7 +112,7 @@ static int wm831x_backlight_get_brightness(struct backlight_device *bl) return data->current_brightness; } -static struct backlight_ops wm831x_backlight_ops = { +static const struct backlight_ops wm831x_backlight_ops = { .options = BL_CORE_SUSPENDRESUME, .update_status = wm831x_backlight_update_status, .get_brightness = wm831x_backlight_get_brightness, diff --git a/drivers/video/omap/lcd_ldp.c b/drivers/video/omap/lcd_ldp.c index 5bb7f6f14601..0f5952cae85e 100644 --- a/drivers/video/omap/lcd_ldp.c +++ b/drivers/video/omap/lcd_ldp.c @@ -24,7 +24,7 @@ #include <linux/module.h> #include <linux/platform_device.h> #include <linux/delay.h> -#include <linux/i2c/twl4030.h> +#include <linux/i2c/twl.h> #include <mach/gpio.h> #include <plat/mux.h> @@ -59,7 +59,7 @@ #define TWL4030_VPLL2_DEV_GRP 0x33 #define TWL4030_VPLL2_DEDICATED 0x36 -#define t2_out(c, r, v) twl4030_i2c_write_u8(c, r, v) +#define t2_out(c, r, v) twl_i2c_write_u8(c, r, v) static int ldp_panel_init(struct lcd_panel *panel, diff --git a/drivers/video/omap/lcd_omap2evm.c b/drivers/video/omap/lcd_omap2evm.c index 006c2fe7360e..7e7a65c08452 100644 --- a/drivers/video/omap/lcd_omap2evm.c +++ b/drivers/video/omap/lcd_omap2evm.c @@ -24,7 +24,7 @@ #include <linux/module.h> #include <linux/platform_device.h> #include <linux/gpio.h> -#include <linux/i2c/twl4030.h> +#include <linux/i2c/twl.h> #include <plat/mux.h> #include <asm/mach-types.h> @@ -61,9 +61,9 @@ static int omap2evm_panel_init(struct lcd_panel *panel, gpio_direction_output(LCD_PANEL_LR, 1); gpio_direction_output(LCD_PANEL_UD, 1); - twl4030_i2c_write_u8(TWL4030_MODULE_LED, 0x11, TWL_LED_LEDEN); - twl4030_i2c_write_u8(TWL4030_MODULE_PWMA, 0x01, TWL_PWMA_PWMAON); - twl4030_i2c_write_u8(TWL4030_MODULE_PWMA, 0x02, TWL_PWMA_PWMAOFF); + twl_i2c_write_u8(TWL4030_MODULE_LED, 0x11, TWL_LED_LEDEN); + twl_i2c_write_u8(TWL4030_MODULE_PWMA, 0x01, TWL_PWMA_PWMAON); + twl_i2c_write_u8(TWL4030_MODULE_PWMA, 0x02, TWL_PWMA_PWMAOFF); bklight_level = 100; return 0; @@ -101,7 +101,7 @@ static int omap2evm_bklight_setlevel(struct lcd_panel *panel, u8 c; if ((level >= 0) && (level <= 100)) { c = (125 * (100 - level)) / 100 + 2; - twl4030_i2c_write_u8(TWL4030_MODULE_PWMA, c, TWL_PWMA_PWMAOFF); + twl_i2c_write_u8(TWL4030_MODULE_PWMA, c, TWL_PWMA_PWMAOFF); bklight_level = level; } return 0; diff --git a/drivers/video/omap/lcd_omap3beagle.c b/drivers/video/omap/lcd_omap3beagle.c index fc503d8f3c24..ca75cc2a87a5 100644 --- a/drivers/video/omap/lcd_omap3beagle.c +++ b/drivers/video/omap/lcd_omap3beagle.c @@ -23,7 +23,7 @@ #include <linux/module.h> #include <linux/platform_device.h> #include <linux/gpio.h> -#include <linux/i2c/twl4030.h> +#include <linux/i2c/twl.h> #include <plat/mux.h> #include <plat/mux.h> diff --git a/drivers/video/omap/lcd_omap3evm.c b/drivers/video/omap/lcd_omap3evm.c index ae2edc4081a8..06840da0b094 100644 --- a/drivers/video/omap/lcd_omap3evm.c +++ b/drivers/video/omap/lcd_omap3evm.c @@ -23,7 +23,7 @@ #include <linux/module.h> #include <linux/platform_device.h> #include <linux/gpio.h> -#include <linux/i2c/twl4030.h> +#include <linux/i2c/twl.h> #include <plat/mux.h> #include <asm/mach-types.h> @@ -63,9 +63,9 @@ static int omap3evm_panel_init(struct lcd_panel *panel, gpio_direction_output(LCD_PANEL_LR, 1); gpio_direction_output(LCD_PANEL_UD, 1); - twl4030_i2c_write_u8(TWL4030_MODULE_LED, 0x11, TWL_LED_LEDEN); - twl4030_i2c_write_u8(TWL4030_MODULE_PWMA, 0x01, TWL_PWMA_PWMAON); - twl4030_i2c_write_u8(TWL4030_MODULE_PWMA, 0x02, TWL_PWMA_PWMAOFF); + twl_i2c_write_u8(TWL4030_MODULE_LED, 0x11, TWL_LED_LEDEN); + twl_i2c_write_u8(TWL4030_MODULE_PWMA, 0x01, TWL_PWMA_PWMAON); + twl_i2c_write_u8(TWL4030_MODULE_PWMA, 0x02, TWL_PWMA_PWMAOFF); bklight_level = 100; return 0; @@ -102,7 +102,7 @@ static int omap3evm_bklight_setlevel(struct lcd_panel *panel, u8 c; if ((level >= 0) && (level <= 100)) { c = (125 * (100 - level)) / 100 + 2; - twl4030_i2c_write_u8(TWL4030_MODULE_PWMA, c, TWL_PWMA_PWMAOFF); + twl_i2c_write_u8(TWL4030_MODULE_PWMA, c, TWL_PWMA_PWMAOFF); bklight_level = level; } return 0; diff --git a/drivers/video/omap/lcd_overo.c b/drivers/video/omap/lcd_overo.c index 56ee192e9ee2..564933ffac6e 100644 --- a/drivers/video/omap/lcd_overo.c +++ b/drivers/video/omap/lcd_overo.c @@ -21,7 +21,7 @@ #include <linux/module.h> #include <linux/platform_device.h> -#include <linux/i2c/twl4030.h> +#include <linux/i2c/twl.h> #include <mach/gpio.h> #include <plat/mux.h> diff --git a/drivers/video/via/viafbdev.c b/drivers/video/via/viafbdev.c index 10d8c4b4baeb..d8df17a7d5fc 100644 --- a/drivers/video/via/viafbdev.c +++ b/drivers/video/via/viafbdev.c @@ -680,7 +680,7 @@ static int viafb_ioctl(struct fb_info *info, u_int cmd, u_long arg) if (!viafb_gamma_table) return -ENOMEM; if (copy_from_user(viafb_gamma_table, argp, - sizeof(viafb_gamma_table))) { + 256 * sizeof(u32))) { kfree(viafb_gamma_table); return -EFAULT; } @@ -694,7 +694,7 @@ static int viafb_ioctl(struct fb_info *info, u_int cmd, u_long arg) return -ENOMEM; viafb_get_gamma_table(viafb_gamma_table); if (copy_to_user(argp, viafb_gamma_table, - sizeof(viafb_gamma_table))) { + 256 * sizeof(u32))) { kfree(viafb_gamma_table); return -EFAULT; } diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index d958b76430a2..088f32f29a6e 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -368,7 +368,7 @@ config ALIM7101_WDT config GEODE_WDT tristate "AMD Geode CS5535/CS5536 Watchdog" - depends on MGEODE_LX + depends on CS5535_MFGPT help This driver enables a watchdog capability built into the CS5535/CS5536 companion chips for the AMD Geode GX and LX @@ -815,16 +815,6 @@ config PNX833X_WDT timer has expired and no process has written to /dev/watchdog during that time. -config WDT_RM9K_GPI - tristate "RM9000/GPI hardware watchdog" - depends on CPU_RM9000 - help - Watchdog implementation using the GPI hardware found on - PMC-Sierra RM9xxx CPUs. - - To compile this driver as a module, choose M here: the - module will be called rm9k_wdt. - config SIBYTE_WDOG tristate "Sibyte SoC hardware watchdog" depends on CPU_SB1 diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile index 89c045dc468e..475c61100069 100644 --- a/drivers/watchdog/Makefile +++ b/drivers/watchdog/Makefile @@ -109,7 +109,6 @@ obj-$(CONFIG_RC32434_WDT) += rc32434_wdt.o obj-$(CONFIG_INDYDOG) += indydog.o obj-$(CONFIG_WDT_MTX1) += mtx-1_wdt.o obj-$(CONFIG_PNX833X_WDT) += pnx833x_wdt.o -obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o obj-$(CONFIG_AR7_WDT) += ar7_wdt.o obj-$(CONFIG_TXX9_WDT) += txx9wdt.o diff --git a/drivers/watchdog/geodewdt.c b/drivers/watchdog/geodewdt.c index 9acf0015a1e7..38252ff828ca 100644 --- a/drivers/watchdog/geodewdt.c +++ b/drivers/watchdog/geodewdt.c @@ -1,6 +1,7 @@ -/* Watchdog timer for the Geode GX/LX with the CS5535/CS5536 companion chip +/* Watchdog timer for machines with the CS5535/CS5536 companion chip * * Copyright (C) 2006-2007, Advanced Micro Devices, Inc. + * Copyright (C) 2009 Andres Salomon <dilinger@collabora.co.uk> * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -19,7 +20,7 @@ #include <linux/reboot.h> #include <linux/uaccess.h> -#include <asm/geode.h> +#include <linux/cs5535.h> #define GEODEWDT_HZ 500 #define GEODEWDT_SCALE 6 @@ -46,25 +47,25 @@ MODULE_PARM_DESC(nowayout, static struct platform_device *geodewdt_platform_device; static unsigned long wdt_flags; -static int wdt_timer; +static struct cs5535_mfgpt_timer *wdt_timer; static int safe_close; static void geodewdt_ping(void) { /* Stop the counter */ - geode_mfgpt_write(wdt_timer, MFGPT_REG_SETUP, 0); + cs5535_mfgpt_write(wdt_timer, MFGPT_REG_SETUP, 0); /* Reset the counter */ - geode_mfgpt_write(wdt_timer, MFGPT_REG_COUNTER, 0); + cs5535_mfgpt_write(wdt_timer, MFGPT_REG_COUNTER, 0); /* Enable the counter */ - geode_mfgpt_write(wdt_timer, MFGPT_REG_SETUP, MFGPT_SETUP_CNTEN); + cs5535_mfgpt_write(wdt_timer, MFGPT_REG_SETUP, MFGPT_SETUP_CNTEN); } static void geodewdt_disable(void) { - geode_mfgpt_write(wdt_timer, MFGPT_REG_SETUP, 0); - geode_mfgpt_write(wdt_timer, MFGPT_REG_COUNTER, 0); + cs5535_mfgpt_write(wdt_timer, MFGPT_REG_SETUP, 0); + cs5535_mfgpt_write(wdt_timer, MFGPT_REG_COUNTER, 0); } static int geodewdt_set_heartbeat(int val) @@ -72,10 +73,10 @@ static int geodewdt_set_heartbeat(int val) if (val < 1 || val > GEODEWDT_MAX_SECONDS) return -EINVAL; - geode_mfgpt_write(wdt_timer, MFGPT_REG_SETUP, 0); - geode_mfgpt_write(wdt_timer, MFGPT_REG_CMP2, val * GEODEWDT_HZ); - geode_mfgpt_write(wdt_timer, MFGPT_REG_COUNTER, 0); - geode_mfgpt_write(wdt_timer, MFGPT_REG_SETUP, MFGPT_SETUP_CNTEN); + cs5535_mfgpt_write(wdt_timer, MFGPT_REG_SETUP, 0); + cs5535_mfgpt_write(wdt_timer, MFGPT_REG_CMP2, val * GEODEWDT_HZ); + cs5535_mfgpt_write(wdt_timer, MFGPT_REG_COUNTER, 0); + cs5535_mfgpt_write(wdt_timer, MFGPT_REG_SETUP, MFGPT_SETUP_CNTEN); timeout = val; return 0; @@ -215,28 +216,25 @@ static struct miscdevice geodewdt_miscdev = { static int __devinit geodewdt_probe(struct platform_device *dev) { - int ret, timer; - - timer = geode_mfgpt_alloc_timer(MFGPT_TIMER_ANY, MFGPT_DOMAIN_WORKING); + int ret; - if (timer == -1) { + wdt_timer = cs5535_mfgpt_alloc_timer(MFGPT_TIMER_ANY, MFGPT_DOMAIN_WORKING); + if (!wdt_timer) { printk(KERN_ERR "geodewdt: No timers were available\n"); return -ENODEV; } - wdt_timer = timer; - /* Set up the timer */ - geode_mfgpt_write(wdt_timer, MFGPT_REG_SETUP, + cs5535_mfgpt_write(wdt_timer, MFGPT_REG_SETUP, GEODEWDT_SCALE | (3 << 8)); /* Set up comparator 2 to reset when the event fires */ - geode_mfgpt_toggle_event(wdt_timer, MFGPT_CMP2, MFGPT_EVENT_RESET, 1); + cs5535_mfgpt_toggle_event(wdt_timer, MFGPT_CMP2, MFGPT_EVENT_RESET, 1); /* Set up the initial timeout */ - geode_mfgpt_write(wdt_timer, MFGPT_REG_CMP2, + cs5535_mfgpt_write(wdt_timer, MFGPT_REG_CMP2, timeout * GEODEWDT_HZ); ret = misc_register(&geodewdt_miscdev); diff --git a/drivers/watchdog/rm9k_wdt.c b/drivers/watchdog/rm9k_wdt.c deleted file mode 100644 index bb66958b9433..000000000000 --- a/drivers/watchdog/rm9k_wdt.c +++ /dev/null @@ -1,419 +0,0 @@ -/* - * Watchdog implementation for GPI h/w found on PMC-Sierra RM9xxx - * chips. - * - * Copyright (C) 2004 by Basler Vision Technologies AG - * Author: Thomas Koeller <thomas.koeller@baslerweb.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/platform_device.h> -#include <linux/module.h> -#include <linux/moduleparam.h> -#include <linux/interrupt.h> -#include <linux/fs.h> -#include <linux/reboot.h> -#include <linux/notifier.h> -#include <linux/miscdevice.h> -#include <linux/watchdog.h> -#include <linux/io.h> -#include <linux/uaccess.h> -#include <asm/atomic.h> -#include <asm/processor.h> -#include <asm/system.h> -#include <asm/rm9k-ocd.h> - -#include <rm9k_wdt.h> - - -#define CLOCK 125000000 -#define MAX_TIMEOUT_SECONDS 32 -#define CPCCR 0x0080 -#define CPGIG1SR 0x0044 -#define CPGIG1ER 0x0054 - - -/* Function prototypes */ -static irqreturn_t wdt_gpi_irqhdl(int, void *); -static void wdt_gpi_start(void); -static void wdt_gpi_stop(void); -static void wdt_gpi_set_timeout(unsigned int); -static int wdt_gpi_open(struct inode *, struct file *); -static int wdt_gpi_release(struct inode *, struct file *); -static ssize_t wdt_gpi_write(struct file *, const char __user *, size_t, - loff_t *); -static long wdt_gpi_ioctl(struct file *, unsigned int, unsigned long); -static int wdt_gpi_notify(struct notifier_block *, unsigned long, void *); -static const struct resource *wdt_gpi_get_resource(struct platform_device *, - const char *, unsigned int); -static int __init wdt_gpi_probe(struct platform_device *); -static int __exit wdt_gpi_remove(struct platform_device *); - - -static const char wdt_gpi_name[] = "wdt_gpi"; -static atomic_t opencnt; -static int expect_close; -static int locked; - - -/* These are set from device resources */ -static void __iomem *wd_regs; -static unsigned int wd_irq, wd_ctr; - - -/* Module arguments */ -static int timeout = MAX_TIMEOUT_SECONDS; -module_param(timeout, int, 0444); -MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds"); - -static unsigned long resetaddr = 0xbffdc200; -module_param(resetaddr, ulong, 0444); -MODULE_PARM_DESC(resetaddr, "Address to write to to force a reset"); - -static unsigned long flagaddr = 0xbffdc104; -module_param(flagaddr, ulong, 0444); -MODULE_PARM_DESC(flagaddr, "Address to write to boot flags to"); - -static int powercycle; -module_param(powercycle, bool, 0444); -MODULE_PARM_DESC(powercycle, "Cycle power if watchdog expires"); - -static int nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, bool, 0444); -MODULE_PARM_DESC(nowayout, "Watchdog cannot be disabled once started"); - - -/* Kernel interfaces */ -static const struct file_operations fops = { - .owner = THIS_MODULE, - .open = wdt_gpi_open, - .release = wdt_gpi_release, - .write = wdt_gpi_write, - .unlocked_ioctl = wdt_gpi_ioctl, -}; - -static struct miscdevice miscdev = { - .minor = WATCHDOG_MINOR, - .name = wdt_gpi_name, - .fops = &fops, -}; - -static struct notifier_block wdt_gpi_shutdown = { - .notifier_call = wdt_gpi_notify, -}; - - -/* Interrupt handler */ -static irqreturn_t wdt_gpi_irqhdl(int irq, void *ctxt) -{ - if (!unlikely(__raw_readl(wd_regs + 0x0008) & 0x1)) - return IRQ_NONE; - __raw_writel(0x1, wd_regs + 0x0008); - - - printk(KERN_CRIT "%s: watchdog expired - resetting system\n", - wdt_gpi_name); - - *(volatile char *) flagaddr |= 0x01; - *(volatile char *) resetaddr = powercycle ? 0x01 : 0x2; - iob(); - while (1) - cpu_relax(); -} - - -/* Watchdog functions */ -static void wdt_gpi_start(void) -{ - u32 reg; - - lock_titan_regs(); - reg = titan_readl(CPGIG1ER); - titan_writel(reg | (0x100 << wd_ctr), CPGIG1ER); - iob(); - unlock_titan_regs(); -} - -static void wdt_gpi_stop(void) -{ - u32 reg; - - lock_titan_regs(); - reg = titan_readl(CPCCR) & ~(0xf << (wd_ctr * 4)); - titan_writel(reg, CPCCR); - reg = titan_readl(CPGIG1ER); - titan_writel(reg & ~(0x100 << wd_ctr), CPGIG1ER); - iob(); - unlock_titan_regs(); -} - -static void wdt_gpi_set_timeout(unsigned int to) -{ - u32 reg; - const u32 wdval = (to * CLOCK) & ~0x0000000f; - - lock_titan_regs(); - reg = titan_readl(CPCCR) & ~(0xf << (wd_ctr * 4)); - titan_writel(reg, CPCCR); - wmb(); - __raw_writel(wdval, wd_regs + 0x0000); - wmb(); - titan_writel(reg | (0x2 << (wd_ctr * 4)), CPCCR); - wmb(); - titan_writel(reg | (0x5 << (wd_ctr * 4)), CPCCR); - iob(); - unlock_titan_regs(); -} - - -/* /dev/watchdog operations */ -static int wdt_gpi_open(struct inode *inode, struct file *file) -{ - int res; - - if (unlikely(atomic_dec_if_positive(&opencnt) < 0)) - return -EBUSY; - - expect_close = 0; - if (locked) { - module_put(THIS_MODULE); - free_irq(wd_irq, &miscdev); - locked = 0; - } - - res = request_irq(wd_irq, wdt_gpi_irqhdl, IRQF_SHARED | IRQF_DISABLED, - wdt_gpi_name, &miscdev); - if (unlikely(res)) - return res; - - wdt_gpi_set_timeout(timeout); - wdt_gpi_start(); - - printk(KERN_INFO "%s: watchdog started, timeout = %u seconds\n", - wdt_gpi_name, timeout); - return nonseekable_open(inode, file); -} - -static int wdt_gpi_release(struct inode *inode, struct file *file) -{ - if (nowayout) { - printk(KERN_INFO "%s: no way out - watchdog left running\n", - wdt_gpi_name); - __module_get(THIS_MODULE); - locked = 1; - } else { - if (expect_close) { - wdt_gpi_stop(); - free_irq(wd_irq, &miscdev); - printk(KERN_INFO "%s: watchdog stopped\n", - wdt_gpi_name); - } else { - printk(KERN_CRIT "%s: unexpected close() -" - " watchdog left running\n", - wdt_gpi_name); - wdt_gpi_set_timeout(timeout); - __module_get(THIS_MODULE); - locked = 1; - } - } - - atomic_inc(&opencnt); - return 0; -} - -static ssize_t wdt_gpi_write(struct file *f, const char __user *d, size_t s, - loff_t *o) -{ - char val; - - wdt_gpi_set_timeout(timeout); - expect_close = (s > 0) && !get_user(val, d) && (val == 'V'); - return s ? 1 : 0; -} - -static long wdt_gpi_ioctl(struct file *f, unsigned int cmd, unsigned long arg) -{ - long res = -ENOTTY; - const long size = _IOC_SIZE(cmd); - int stat; - void __user *argp = (void __user *)arg; - static struct watchdog_info wdinfo = { - .identity = "RM9xxx/GPI watchdog", - .firmware_version = 0, - .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING - }; - - if (unlikely(_IOC_TYPE(cmd) != WATCHDOG_IOCTL_BASE)) - return -ENOTTY; - - if ((_IOC_DIR(cmd) & _IOC_READ) - && !access_ok(VERIFY_WRITE, arg, size)) - return -EFAULT; - - if ((_IOC_DIR(cmd) & _IOC_WRITE) - && !access_ok(VERIFY_READ, arg, size)) - return -EFAULT; - - expect_close = 0; - - switch (cmd) { - case WDIOC_GETSUPPORT: - wdinfo.options = nowayout ? - WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING : - WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | - WDIOF_MAGICCLOSE; - res = __copy_to_user(argp, &wdinfo, size) ? -EFAULT : size; - break; - - case WDIOC_GETSTATUS: - break; - - case WDIOC_GETBOOTSTATUS: - stat = (*(volatile char *) flagaddr & 0x01) - ? WDIOF_CARDRESET : 0; - res = __copy_to_user(argp, &stat, size) ? - -EFAULT : size; - break; - - case WDIOC_SETOPTIONS: - break; - - case WDIOC_KEEPALIVE: - wdt_gpi_set_timeout(timeout); - res = size; - break; - - case WDIOC_SETTIMEOUT: - { - int val; - if (unlikely(__copy_from_user(&val, argp, size))) { - res = -EFAULT; - break; - } - - if (val > MAX_TIMEOUT_SECONDS) - val = MAX_TIMEOUT_SECONDS; - timeout = val; - wdt_gpi_set_timeout(val); - res = size; - printk(KERN_INFO "%s: timeout set to %u seconds\n", - wdt_gpi_name, timeout); - } - break; - - case WDIOC_GETTIMEOUT: - res = __copy_to_user(argp, &timeout, size) ? - -EFAULT : size; - break; - } - - return res; -} - - -/* Shutdown notifier */ -static int wdt_gpi_notify(struct notifier_block *this, unsigned long code, - void *unused) -{ - if (code == SYS_DOWN || code == SYS_HALT) - wdt_gpi_stop(); - - return NOTIFY_DONE; -} - - -/* Init & exit procedures */ -static const struct resource *wdt_gpi_get_resource(struct platform_device *pdv, - const char *name, unsigned int type) -{ - char buf[80]; - if (snprintf(buf, sizeof(buf), "%s_0", name) >= sizeof(buf)) - return NULL; - return platform_get_resource_byname(pdv, type, buf); -} - -/* No hotplugging on the platform bus - use __devinit */ -static int __devinit wdt_gpi_probe(struct platform_device *pdv) -{ - int res; - const struct resource - * const rr = wdt_gpi_get_resource(pdv, WDT_RESOURCE_REGS, - IORESOURCE_MEM), - * const ri = wdt_gpi_get_resource(pdv, WDT_RESOURCE_IRQ, - IORESOURCE_IRQ), - * const rc = wdt_gpi_get_resource(pdv, WDT_RESOURCE_COUNTER, - 0); - - if (unlikely(!rr || !ri || !rc)) - return -ENXIO; - - wd_regs = ioremap_nocache(rr->start, rr->end + 1 - rr->start); - if (unlikely(!wd_regs)) - return -ENOMEM; - wd_irq = ri->start; - wd_ctr = rc->start; - res = misc_register(&miscdev); - if (res) - iounmap(wd_regs); - else - register_reboot_notifier(&wdt_gpi_shutdown); - return res; -} - -static int __devexit wdt_gpi_remove(struct platform_device *dev) -{ - int res; - - unregister_reboot_notifier(&wdt_gpi_shutdown); - res = misc_deregister(&miscdev); - iounmap(wd_regs); - wd_regs = NULL; - return res; -} - - -/* Device driver init & exit */ -static struct platform_driver wgt_gpi_driver = { - .driver = { - .name = wdt_gpi_name, - .owner = THIS_MODULE, - }, - .probe = wdt_gpi_probe, - .remove = __devexit_p(wdt_gpi_remove), -}; - -static int __init wdt_gpi_init_module(void) -{ - atomic_set(&opencnt, 1); - if (timeout > MAX_TIMEOUT_SECONDS) - timeout = MAX_TIMEOUT_SECONDS; - return platform_driver_register(&wdt_gpi_driver); -} - -static void __exit wdt_gpi_cleanup_module(void) -{ - platform_driver_unregister(&wdt_gpi_driver); -} - -module_init(wdt_gpi_init_module); -module_exit(wdt_gpi_cleanup_module); - -MODULE_AUTHOR("Thomas Koeller <thomas.koeller@baslerweb.com>"); -MODULE_DESCRIPTION("Basler eXcite watchdog driver for gpi devices"); -MODULE_VERSION("0.1"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); - |