diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/net/ethernet/Kconfig | 1 | ||||
| -rw-r--r-- | drivers/net/ethernet/Makefile | 1 | ||||
| -rw-r--r-- | drivers/net/ethernet/wangxun/Kconfig | 32 | ||||
| -rw-r--r-- | drivers/net/ethernet/wangxun/Makefile | 6 | ||||
| -rw-r--r-- | drivers/net/ethernet/wangxun/txgbe/Makefile | 9 | ||||
| -rw-r--r-- | drivers/net/ethernet/wangxun/txgbe/txgbe.h | 24 | ||||
| -rw-r--r-- | drivers/net/ethernet/wangxun/txgbe/txgbe_main.c | 165 | ||||
| -rw-r--r-- | drivers/net/ethernet/wangxun/txgbe/txgbe_type.h | 57 |
8 files changed, 295 insertions, 0 deletions
diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig index 955abbc5490e..9a55c1d5a0a1 100644 --- a/drivers/net/ethernet/Kconfig +++ b/drivers/net/ethernet/Kconfig @@ -84,6 +84,7 @@ source "drivers/net/ethernet/huawei/Kconfig" source "drivers/net/ethernet/i825xx/Kconfig" source "drivers/net/ethernet/ibm/Kconfig" source "drivers/net/ethernet/intel/Kconfig" +source "drivers/net/ethernet/wangxun/Kconfig" source "drivers/net/ethernet/xscale/Kconfig" config JME diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile index 9eb01169957f..c06e75ed4231 100644 --- a/drivers/net/ethernet/Makefile +++ b/drivers/net/ethernet/Makefile @@ -97,6 +97,7 @@ obj-$(CONFIG_NET_VENDOR_TOSHIBA) += toshiba/ obj-$(CONFIG_NET_VENDOR_TUNDRA) += tundra/ obj-$(CONFIG_NET_VENDOR_VERTEXCOM) += vertexcom/ obj-$(CONFIG_NET_VENDOR_VIA) += via/ +obj-$(CONFIG_NET_VENDOR_WANGXUN) += wangxun/ obj-$(CONFIG_NET_VENDOR_WIZNET) += wiznet/ obj-$(CONFIG_NET_VENDOR_XILINX) += xilinx/ obj-$(CONFIG_NET_VENDOR_XIRCOM) += xircom/ diff --git a/drivers/net/ethernet/wangxun/Kconfig b/drivers/net/ethernet/wangxun/Kconfig new file mode 100644 index 000000000000..baa1f0a5cc37 --- /dev/null +++ b/drivers/net/ethernet/wangxun/Kconfig @@ -0,0 +1,32 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# Wangxun network device configuration +# + +config NET_VENDOR_WANGXUN + bool "Wangxun devices" + default y + help + If you have a network (Ethernet) card belonging to this class, say Y. + + Note that the answer to this question doesn't directly affect the + kernel: saying N will just cause the configurator to skip all + the questions about Intel cards. If you say Y, you will be asked for + your specific card in the following questions. + +if NET_VENDOR_WANGXUN + +config TXGBE + tristate "Wangxun(R) 10GbE PCI Express adapters support" + depends on PCI + help + This driver supports Wangxun(R) 10GbE PCI Express family of + adapters. + + More specific information on configuring the driver is in + <file:Documentation/networking/device_drivers/ethernet/wangxun/txgbe.rst>. + + To compile this driver as a module, choose M here. The module + will be called txgbe. + +endif # NET_VENDOR_WANGXUN diff --git a/drivers/net/ethernet/wangxun/Makefile b/drivers/net/ethernet/wangxun/Makefile new file mode 100644 index 000000000000..c34db1bead25 --- /dev/null +++ b/drivers/net/ethernet/wangxun/Makefile @@ -0,0 +1,6 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# Makefile for the Wangxun network device drivers. +# + +obj-$(CONFIG_TXGBE) += txgbe/ diff --git a/drivers/net/ethernet/wangxun/txgbe/Makefile b/drivers/net/ethernet/wangxun/txgbe/Makefile new file mode 100644 index 000000000000..431303ca75b4 --- /dev/null +++ b/drivers/net/ethernet/wangxun/txgbe/Makefile @@ -0,0 +1,9 @@ +# SPDX-License-Identifier: GPL-2.0 +# Copyright (c) 2015 - 2022 Beijing WangXun Technology Co., Ltd. +# +# Makefile for the Wangxun(R) 10GbE PCI Express ethernet driver +# + +obj-$(CONFIG_TXGBE) += txgbe.o + +txgbe-objs := txgbe_main.o diff --git a/drivers/net/ethernet/wangxun/txgbe/txgbe.h b/drivers/net/ethernet/wangxun/txgbe/txgbe.h new file mode 100644 index 000000000000..38ddbde0ed0f --- /dev/null +++ b/drivers/net/ethernet/wangxun/txgbe/txgbe.h @@ -0,0 +1,24 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* Copyright (c) 2015 - 2022 Beijing WangXun Technology Co., Ltd. */ + +#ifndef _TXGBE_H_ +#define _TXGBE_H_ + +#include "txgbe_type.h" + +#define TXGBE_MAX_FDIR_INDICES 63 + +#define TXGBE_MAX_RX_QUEUES (TXGBE_MAX_FDIR_INDICES + 1) +#define TXGBE_MAX_TX_QUEUES (TXGBE_MAX_FDIR_INDICES + 1) + +/* board specific private data structure */ +struct txgbe_adapter { + u8 __iomem *io_addr; /* Mainly for iounmap use */ + /* OS defined structs */ + struct net_device *netdev; + struct pci_dev *pdev; +}; + +extern char txgbe_driver_name[]; + +#endif /* _TXGBE_H_ */ diff --git a/drivers/net/ethernet/wangxun/txgbe/txgbe_main.c b/drivers/net/ethernet/wangxun/txgbe/txgbe_main.c new file mode 100644 index 000000000000..55c3c720b377 --- /dev/null +++ b/drivers/net/ethernet/wangxun/txgbe/txgbe_main.c @@ -0,0 +1,165 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright (c) 2015 - 2022 Beijing WangXun Technology Co., Ltd. */ + +#include <linux/types.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/netdevice.h> +#include <linux/string.h> +#include <linux/aer.h> +#include <linux/etherdevice.h> + +#include "txgbe.h" + +char txgbe_driver_name[] = "txgbe"; + +/* txgbe_pci_tbl - PCI Device ID Table + * + * Wildcard entries (PCI_ANY_ID) should come last + * Last entry must be all 0s + * + * { Vendor ID, Device ID, SubVendor ID, SubDevice ID, + * Class, Class Mask, private data (not used) } + */ +static const struct pci_device_id txgbe_pci_tbl[] = { + { PCI_VDEVICE(WANGXUN, TXGBE_DEV_ID_SP1000), 0}, + { PCI_VDEVICE(WANGXUN, TXGBE_DEV_ID_WX1820), 0}, + /* required last entry */ + { .device = 0 } +}; + +#define DEFAULT_DEBUG_LEVEL_SHIFT 3 + +static void txgbe_dev_shutdown(struct pci_dev *pdev, bool *enable_wake) +{ + struct txgbe_adapter *adapter = pci_get_drvdata(pdev); + struct net_device *netdev = adapter->netdev; + + netif_device_detach(netdev); + + pci_disable_device(pdev); +} + +static void txgbe_shutdown(struct pci_dev *pdev) +{ + bool wake; + + txgbe_dev_shutdown(pdev, &wake); + + if (system_state == SYSTEM_POWER_OFF) { + pci_wake_from_d3(pdev, wake); + pci_set_power_state(pdev, PCI_D3hot); + } +} + +/** + * txgbe_probe - Device Initialization Routine + * @pdev: PCI device information struct + * @ent: entry in txgbe_pci_tbl + * + * Returns 0 on success, negative on failure + * + * txgbe_probe initializes an adapter identified by a pci_dev structure. + * The OS initialization, configuring of the adapter private structure, + * and a hardware reset occur. + **/ +static int txgbe_probe(struct pci_dev *pdev, + const struct pci_device_id __always_unused *ent) +{ + struct txgbe_adapter *adapter = NULL; + struct net_device *netdev; + int err; + + err = pci_enable_device_mem(pdev); + if (err) + return err; + + err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64)); + if (err) { + dev_err(&pdev->dev, + "No usable DMA configuration, aborting\n"); + goto err_pci_disable_dev; + } + + err = pci_request_selected_regions(pdev, + pci_select_bars(pdev, IORESOURCE_MEM), + txgbe_driver_name); + if (err) { + dev_err(&pdev->dev, + "pci_request_selected_regions failed 0x%x\n", err); + goto err_pci_disable_dev; + } + + pci_enable_pcie_error_reporting(pdev); + pci_set_master(pdev); + + netdev = devm_alloc_etherdev_mqs(&pdev->dev, + sizeof(struct txgbe_adapter), + TXGBE_MAX_TX_QUEUES, + TXGBE_MAX_RX_QUEUES); + if (!netdev) { + err = -ENOMEM; + goto err_pci_release_regions; + } + + SET_NETDEV_DEV(netdev, &pdev->dev); + + adapter = netdev_priv(netdev); + adapter->netdev = netdev; + adapter->pdev = pdev; + + adapter->io_addr = devm_ioremap(&pdev->dev, + pci_resource_start(pdev, 0), + pci_resource_len(pdev, 0)); + if (!adapter->io_addr) { + err = -EIO; + goto err_pci_release_regions; + } + + netdev->features |= NETIF_F_HIGHDMA; + + pci_set_drvdata(pdev, adapter); + + return 0; + +err_pci_release_regions: + pci_release_selected_regions(pdev, + pci_select_bars(pdev, IORESOURCE_MEM)); +err_pci_disable_dev: + pci_disable_device(pdev); + return err; +} + +/** + * txgbe_remove - Device Removal Routine + * @pdev: PCI device information struct + * + * txgbe_remove is called by the PCI subsystem to alert the driver + * that it should release a PCI device. The could be caused by a + * Hot-Plug event, or because the driver is going to be removed from + * memory. + **/ +static void txgbe_remove(struct pci_dev *pdev) +{ + pci_release_selected_regions(pdev, + pci_select_bars(pdev, IORESOURCE_MEM)); + + pci_disable_pcie_error_reporting(pdev); + + pci_disable_device(pdev); +} + +static struct pci_driver txgbe_driver = { + .name = txgbe_driver_name, + .id_table = txgbe_pci_tbl, + .probe = txgbe_probe, + .remove = txgbe_remove, + .shutdown = txgbe_shutdown, +}; + +module_pci_driver(txgbe_driver); + +MODULE_DEVICE_TABLE(pci, txgbe_pci_tbl); +MODULE_AUTHOR("Beijing WangXun Technology Co., Ltd, <software@trustnetic.com>"); +MODULE_DESCRIPTION("WangXun(R) 10 Gigabit PCI Express Network Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/net/ethernet/wangxun/txgbe/txgbe_type.h b/drivers/net/ethernet/wangxun/txgbe/txgbe_type.h new file mode 100644 index 000000000000..b2e329f50bae --- /dev/null +++ b/drivers/net/ethernet/wangxun/txgbe/txgbe_type.h @@ -0,0 +1,57 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* Copyright (c) 2015 - 2022 Beijing WangXun Technology Co., Ltd. */ + +#ifndef _TXGBE_TYPE_H_ +#define _TXGBE_TYPE_H_ + +#include <linux/types.h> +#include <linux/netdevice.h> + +/************ txgbe_register.h ************/ +/* Vendor ID */ +#ifndef PCI_VENDOR_ID_WANGXUN +#define PCI_VENDOR_ID_WANGXUN 0x8088 +#endif + +/* Device IDs */ +#define TXGBE_DEV_ID_SP1000 0x1001 +#define TXGBE_DEV_ID_WX1820 0x2001 + +/* Subsystem IDs */ +/* SFP */ +#define TXGBE_ID_SP1000_SFP 0x0000 +#define TXGBE_ID_WX1820_SFP 0x2000 +#define TXGBE_ID_SFP 0x00 + +/* copper */ +#define TXGBE_ID_SP1000_XAUI 0x1010 +#define TXGBE_ID_WX1820_XAUI 0x2010 +#define TXGBE_ID_XAUI 0x10 +#define TXGBE_ID_SP1000_SGMII 0x1020 +#define TXGBE_ID_WX1820_SGMII 0x2020 +#define TXGBE_ID_SGMII 0x20 +/* backplane */ +#define TXGBE_ID_SP1000_KR_KX_KX4 0x1030 +#define TXGBE_ID_WX1820_KR_KX_KX4 0x2030 +#define TXGBE_ID_KR_KX_KX4 0x30 +/* MAC Interface */ +#define TXGBE_ID_SP1000_MAC_XAUI 0x1040 +#define TXGBE_ID_WX1820_MAC_XAUI 0x2040 +#define TXGBE_ID_MAC_XAUI 0x40 +#define TXGBE_ID_SP1000_MAC_SGMII 0x1060 +#define TXGBE_ID_WX1820_MAC_SGMII 0x2060 +#define TXGBE_ID_MAC_SGMII 0x60 + +#define TXGBE_NCSI_SUP 0x8000 +#define TXGBE_NCSI_MASK 0x8000 +#define TXGBE_WOL_SUP 0x4000 +#define TXGBE_WOL_MASK 0x4000 +#define TXGBE_DEV_MASK 0xf0 + +/* Combined interface*/ +#define TXGBE_ID_SFI_XAUI 0x50 + +/* Revision ID */ +#define TXGBE_SP_MPW 1 + +#endif /* _TXGBE_TYPE_H_ */ |