diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/tty/serial/stm32-usart.c | 31 | ||||
| -rw-r--r-- | drivers/tty/serial/stm32-usart.h | 1 |
2 files changed, 26 insertions, 6 deletions
diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c index c6a9293a430f..2e75b586e5bf 100644 --- a/drivers/tty/serial/stm32-usart.c +++ b/drivers/tty/serial/stm32-usart.c @@ -434,6 +434,10 @@ static irqreturn_t stm32_interrupt(int irq, void *ptr) sr = readl_relaxed(port->membase + ofs->isr); + if ((sr & USART_SR_RTOF) && ofs->icr != UNDEF_REG) + writel_relaxed(USART_ICR_RTOCF, + port->membase + ofs->icr); + if ((sr & USART_SR_WUF) && (ofs->icr != UNDEF_REG)) writel_relaxed(USART_ICR_WUCF, port->membase + ofs->icr); @@ -520,7 +524,7 @@ static void stm32_throttle(struct uart_port *port) unsigned long flags; spin_lock_irqsave(&port->lock, flags); - stm32_clr_bits(port, ofs->cr1, USART_CR1_RXNEIE); + stm32_clr_bits(port, ofs->cr1, stm32_port->cr1_irq); spin_unlock_irqrestore(&port->lock, flags); } @@ -532,7 +536,7 @@ static void stm32_unthrottle(struct uart_port *port) unsigned long flags; spin_lock_irqsave(&port->lock, flags); - stm32_set_bits(port, ofs->cr1, USART_CR1_RXNEIE); + stm32_set_bits(port, ofs->cr1, stm32_port->cr1_irq); spin_unlock_irqrestore(&port->lock, flags); } @@ -542,7 +546,7 @@ static void stm32_stop_rx(struct uart_port *port) struct stm32_port *stm32_port = to_stm32_port(port); struct stm32_usart_offsets *ofs = &stm32_port->info->ofs; - stm32_clr_bits(port, ofs->cr1, USART_CR1_RXNEIE); + stm32_clr_bits(port, ofs->cr1, stm32_port->cr1_irq); } /* Handle breaks - ignored by us */ @@ -564,7 +568,7 @@ static int stm32_startup(struct uart_port *port) if (ret) return ret; - val = USART_CR1_RXNEIE | USART_CR1_TE | USART_CR1_RE; + val = stm32_port->cr1_irq | USART_CR1_TE | USART_CR1_RE; if (stm32_port->fifoen) val |= USART_CR1_FIFOEN; stm32_set_bits(port, ofs->cr1, val); @@ -580,7 +584,8 @@ static void stm32_shutdown(struct uart_port *port) u32 val, isr; int ret; - val = USART_CR1_TXEIE | USART_CR1_RXNEIE | USART_CR1_TE | USART_CR1_RE; + val = USART_CR1_TXEIE | USART_CR1_TE; + val |= stm32_port->cr1_irq | USART_CR1_RE; val |= BIT(cfg->uart_enable_bit); if (stm32_port->fifoen) val |= USART_CR1_FIFOEN; @@ -650,7 +655,7 @@ static void stm32_set_termios(struct uart_port *port, struct ktermios *termios, /* Stop serial port and reset value */ writel_relaxed(0, port->membase + ofs->cr1); - cr1 = USART_CR1_TE | USART_CR1_RE | USART_CR1_RXNEIE; + cr1 = USART_CR1_TE | USART_CR1_RE; if (stm32_port->fifoen) cr1 |= USART_CR1_FIFOEN; @@ -683,6 +688,19 @@ static void stm32_set_termios(struct uart_port *port, struct ktermios *termios, dev_dbg(port->dev, "Unsupported data bits config: %u bits\n" , bits); + if (ofs->rtor != UNDEF_REG && (stm32_port->rx_ch || + stm32_port->fifoen)) { + if (cflag & CSTOPB) + bits = bits + 3; /* 1 start bit + 2 stop bits */ + else + bits = bits + 2; /* 1 start bit + 1 stop bit */ + + /* RX timeout irq to occur after last stop bit + bits */ + stm32_port->cr1_irq = USART_CR1_RTOIE; + writel_relaxed(bits, port->membase + ofs->rtor); + cr2 |= USART_CR2_RTOEN; + } + if (cflag & PARODD) cr1 |= USART_CR1_PS; @@ -922,6 +940,7 @@ static struct stm32_port *stm32_of_get_stm32_port(struct platform_device *pdev) stm32_ports[id].hw_flow_control = of_property_read_bool(np, "st,hw-flow-ctrl"); stm32_ports[id].port.line = id; + stm32_ports[id].cr1_irq = USART_CR1_RXNEIE; stm32_ports[id].last_res = RX_BUF_L; return &stm32_ports[id]; } diff --git a/drivers/tty/serial/stm32-usart.h b/drivers/tty/serial/stm32-usart.h index 30d2433e27c3..fcd01feeabec 100644 --- a/drivers/tty/serial/stm32-usart.h +++ b/drivers/tty/serial/stm32-usart.h @@ -249,6 +249,7 @@ struct stm32_port { struct dma_chan *tx_ch; /* dma tx channel */ dma_addr_t tx_dma_buf; /* dma tx buffer bus address */ unsigned char *tx_buf; /* dma tx buffer cpu address */ + u32 cr1_irq; /* USART_CR1_RXNEIE or RTOIE */ int last_res; bool tx_dma_busy; /* dma tx busy */ bool hw_flow_control; |