diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/net/pcs/pcs-xpcs-nxp.c | 169 | ||||
| -rw-r--r-- | drivers/net/pcs/pcs-xpcs.c | 21 | ||||
| -rw-r--r-- | drivers/net/pcs/pcs-xpcs.h | 2 |
3 files changed, 192 insertions, 0 deletions
diff --git a/drivers/net/pcs/pcs-xpcs-nxp.c b/drivers/net/pcs/pcs-xpcs-nxp.c index 51b2fc7d36a9..de99c37cf2ae 100644 --- a/drivers/net/pcs/pcs-xpcs-nxp.c +++ b/drivers/net/pcs/pcs-xpcs-nxp.c @@ -4,6 +4,66 @@ #include <linux/pcs/pcs-xpcs.h> #include "pcs-xpcs.h" +/* LANE_DRIVER1_0 register */ +#define SJA1110_LANE_DRIVER1_0 0x8038 +#define SJA1110_TXDRV(x) (((x) << 12) & GENMASK(14, 12)) + +/* LANE_DRIVER2_0 register */ +#define SJA1110_LANE_DRIVER2_0 0x803a +#define SJA1110_TXDRVTRIM_LSB(x) ((x) & GENMASK_ULL(15, 0)) + +/* LANE_DRIVER2_1 register */ +#define SJA1110_LANE_DRIVER2_1 0x803b +#define SJA1110_LANE_DRIVER2_1_RSV BIT(9) +#define SJA1110_TXDRVTRIM_MSB(x) (((x) & GENMASK_ULL(23, 16)) >> 16) + +/* LANE_TRIM register */ +#define SJA1110_LANE_TRIM 0x8040 +#define SJA1110_TXTEN BIT(11) +#define SJA1110_TXRTRIM(x) (((x) << 8) & GENMASK(10, 8)) +#define SJA1110_TXPLL_BWSEL BIT(7) +#define SJA1110_RXTEN BIT(6) +#define SJA1110_RXRTRIM(x) (((x) << 3) & GENMASK(5, 3)) +#define SJA1110_CDR_GAIN BIT(2) +#define SJA1110_ACCOUPLE_RXVCM_EN BIT(0) + +/* LANE_DATAPATH_1 register */ +#define SJA1110_LANE_DATAPATH_1 0x8037 + +/* POWERDOWN_ENABLE register */ +#define SJA1110_POWERDOWN_ENABLE 0x8041 +#define SJA1110_TXPLL_PD BIT(12) +#define SJA1110_TXPD BIT(11) +#define SJA1110_RXPKDETEN BIT(10) +#define SJA1110_RXCH_PD BIT(9) +#define SJA1110_RXBIAS_PD BIT(8) +#define SJA1110_RESET_SER_EN BIT(7) +#define SJA1110_RESET_SER BIT(6) +#define SJA1110_RESET_DES BIT(5) +#define SJA1110_RCVEN BIT(4) + +/* RXPLL_CTRL0 register */ +#define SJA1110_RXPLL_CTRL0 0x8065 +#define SJA1110_RXPLL_FBDIV(x) (((x) << 2) & GENMASK(9, 2)) + +/* RXPLL_CTRL1 register */ +#define SJA1110_RXPLL_CTRL1 0x8066 +#define SJA1110_RXPLL_REFDIV(x) ((x) & GENMASK(4, 0)) + +/* TXPLL_CTRL0 register */ +#define SJA1110_TXPLL_CTRL0 0x806d +#define SJA1110_TXPLL_FBDIV(x) ((x) & GENMASK(11, 0)) + +/* TXPLL_CTRL1 register */ +#define SJA1110_TXPLL_CTRL1 0x806e +#define SJA1110_TXPLL_REFDIV(x) ((x) & GENMASK(5, 0)) + +/* RX_DATA_DETECT register */ +#define SJA1110_RX_DATA_DETECT 0x8045 + +/* RX_CDR_CTLE register */ +#define SJA1110_RX_CDR_CTLE 0x8042 + /* In NXP SJA1105, the PCS is integrated with a PMA that has the TX lane * polarity inverted by default (PLUS is MINUS, MINUS is PLUS). To obtain * normal non-inverted behavior, the TX lane polarity must be inverted in the @@ -14,3 +74,112 @@ int nxp_sja1105_sgmii_pma_config(struct dw_xpcs *xpcs) return xpcs_write(xpcs, MDIO_MMD_VEND2, DW_VR_MII_DIG_CTRL2, DW_VR_MII_DIG_CTRL2_TX_POL_INV); } + +static int nxp_sja1110_pma_config(struct dw_xpcs *xpcs, + u16 txpll_fbdiv, u16 txpll_refdiv, + u16 rxpll_fbdiv, u16 rxpll_refdiv, + u16 rx_cdr_ctle) +{ + u16 val; + int ret; + + /* Program TX PLL feedback divider and reference divider settings for + * correct oscillation frequency. + */ + ret = xpcs_write(xpcs, MDIO_MMD_VEND2, SJA1110_TXPLL_CTRL0, + SJA1110_TXPLL_FBDIV(txpll_fbdiv)); + if (ret < 0) + return ret; + + ret = xpcs_write(xpcs, MDIO_MMD_VEND2, SJA1110_TXPLL_CTRL1, + SJA1110_TXPLL_REFDIV(txpll_refdiv)); + if (ret < 0) + return ret; + + /* Program transmitter amplitude and disable amplitude trimming */ + ret = xpcs_write(xpcs, MDIO_MMD_VEND2, SJA1110_LANE_DRIVER1_0, + SJA1110_TXDRV(0x5)); + if (ret < 0) + return ret; + + val = SJA1110_TXDRVTRIM_LSB(0xffffffull); + + ret = xpcs_write(xpcs, MDIO_MMD_VEND2, SJA1110_LANE_DRIVER2_0, val); + if (ret < 0) + return ret; + + val = SJA1110_TXDRVTRIM_MSB(0xffffffull) | SJA1110_LANE_DRIVER2_1_RSV; + + ret = xpcs_write(xpcs, MDIO_MMD_VEND2, SJA1110_LANE_DRIVER2_1, val); + if (ret < 0) + return ret; + + /* Enable input and output resistor terminations for low BER. */ + val = SJA1110_ACCOUPLE_RXVCM_EN | SJA1110_CDR_GAIN | + SJA1110_RXRTRIM(4) | SJA1110_RXTEN | SJA1110_TXPLL_BWSEL | + SJA1110_TXRTRIM(3) | SJA1110_TXTEN; + + ret = xpcs_write(xpcs, MDIO_MMD_VEND2, SJA1110_LANE_TRIM, val); + if (ret < 0) + return ret; + + /* Select PCS as transmitter data source. */ + ret = xpcs_write(xpcs, MDIO_MMD_VEND2, SJA1110_LANE_DATAPATH_1, 0); + if (ret < 0) + return ret; + + /* Program RX PLL feedback divider and reference divider for correct + * oscillation frequency. + */ + ret = xpcs_write(xpcs, MDIO_MMD_VEND2, SJA1110_RXPLL_CTRL0, + SJA1110_RXPLL_FBDIV(rxpll_fbdiv)); + if (ret < 0) + return ret; + + ret = xpcs_write(xpcs, MDIO_MMD_VEND2, SJA1110_RXPLL_CTRL1, + SJA1110_RXPLL_REFDIV(rxpll_refdiv)); + if (ret < 0) + return ret; + + /* Program threshold for receiver signal detector. + * Enable control of RXPLL by receiver signal detector to disable RXPLL + * when an input signal is not present. + */ + ret = xpcs_write(xpcs, MDIO_MMD_VEND2, SJA1110_RX_DATA_DETECT, 0x0005); + if (ret < 0) + return ret; + + /* Enable TX and RX PLLs and circuits. + * Release reset of PMA to enable data flow to/from PCS. + */ + val = xpcs_read(xpcs, MDIO_MMD_VEND2, SJA1110_POWERDOWN_ENABLE); + if (val < 0) + return val; + + val &= ~(SJA1110_TXPLL_PD | SJA1110_TXPD | SJA1110_RXCH_PD | + SJA1110_RXBIAS_PD | SJA1110_RESET_SER_EN | + SJA1110_RESET_SER | SJA1110_RESET_DES); + val |= SJA1110_RXPKDETEN | SJA1110_RCVEN; + + ret = xpcs_write(xpcs, MDIO_MMD_VEND2, SJA1110_POWERDOWN_ENABLE, val); + if (ret < 0) + return ret; + + /* Program continuous-time linear equalizer (CTLE) settings. */ + ret = xpcs_write(xpcs, MDIO_MMD_VEND2, SJA1110_RX_CDR_CTLE, + rx_cdr_ctle); + if (ret < 0) + return ret; + + return 0; +} + +int nxp_sja1110_sgmii_pma_config(struct dw_xpcs *xpcs) +{ + return nxp_sja1110_pma_config(xpcs, 0x19, 0x1, 0x19, 0x1, 0x212a); +} + +int nxp_sja1110_2500basex_pma_config(struct dw_xpcs *xpcs) +{ + return nxp_sja1110_pma_config(xpcs, 0x7d, 0x2, 0x7d, 0x2, 0x732a); +} diff --git a/drivers/net/pcs/pcs-xpcs.c b/drivers/net/pcs/pcs-xpcs.c index 3b1baacfaf8f..b66e46fc88dc 100644 --- a/drivers/net/pcs/pcs-xpcs.c +++ b/drivers/net/pcs/pcs-xpcs.c @@ -1039,6 +1039,23 @@ static const struct xpcs_compat nxp_sja1105_xpcs_compat[DW_XPCS_INTERFACE_MAX] = }, }; +static const struct xpcs_compat nxp_sja1110_xpcs_compat[DW_XPCS_INTERFACE_MAX] = { + [DW_XPCS_SGMII] = { + .supported = xpcs_sgmii_features, + .interface = xpcs_sgmii_interfaces, + .num_interfaces = ARRAY_SIZE(xpcs_sgmii_interfaces), + .an_mode = DW_AN_C37_SGMII, + .pma_config = nxp_sja1110_sgmii_pma_config, + }, + [DW_XPCS_2500BASEX] = { + .supported = xpcs_2500basex_features, + .interface = xpcs_2500basex_interfaces, + .num_interfaces = ARRAY_SIZE(xpcs_2500basex_interfaces), + .an_mode = DW_2500BASEX, + .pma_config = nxp_sja1110_2500basex_pma_config, + }, +}; + static const struct xpcs_id xpcs_id_list[] = { { .id = SYNOPSYS_XPCS_ID, @@ -1048,6 +1065,10 @@ static const struct xpcs_id xpcs_id_list[] = { .id = NXP_SJA1105_XPCS_ID, .mask = SYNOPSYS_XPCS_MASK, .compat = nxp_sja1105_xpcs_compat, + }, { + .id = NXP_SJA1110_XPCS_ID, + .mask = SYNOPSYS_XPCS_MASK, + .compat = nxp_sja1110_xpcs_compat, }, }; diff --git a/drivers/net/pcs/pcs-xpcs.h b/drivers/net/pcs/pcs-xpcs.h index 3daf4276a158..35651d32a224 100644 --- a/drivers/net/pcs/pcs-xpcs.h +++ b/drivers/net/pcs/pcs-xpcs.h @@ -111,3 +111,5 @@ int xpcs_read(struct dw_xpcs *xpcs, int dev, u32 reg); int xpcs_write(struct dw_xpcs *xpcs, int dev, u32 reg, u16 val); int nxp_sja1105_sgmii_pma_config(struct dw_xpcs *xpcs); +int nxp_sja1110_sgmii_pma_config(struct dw_xpcs *xpcs); +int nxp_sja1110_2500basex_pma_config(struct dw_xpcs *xpcs); |