5 files changed, 248 insertions, 0 deletions

diff --git a/drivers/iio/Kconfig b/drivers/iio/Kconfig
index 3ab7d48d0b0a..bb1e35c811da 100644
--- a/drivers/iio/Kconfig
+++ b/drivers/iio/Kconfig
@@ -48,4 +48,6 @@ config IIO_CONSUMERS_PER_TRIGGER
 	This value controls the maximum number of consumers that a
 	given trigger may handle. Default is 2.
 
+source "drivers/iio/amplifiers/Kconfig"
+
 endif # IIO
diff --git a/drivers/iio/Makefile b/drivers/iio/Makefile
index d5fc57d12eac..55524916aa56 100644
--- a/drivers/iio/Makefile
+++ b/drivers/iio/Makefile
@@ -8,3 +8,5 @@ industrialio-$(CONFIG_IIO_BUFFER) += industrialio-buffer.o
 industrialio-$(CONFIG_IIO_TRIGGER) += industrialio-trigger.o
 
 obj-$(CONFIG_IIO_KFIFO_BUF) += kfifo_buf.o
+
+obj-y += amplifiers/
diff --git a/drivers/iio/amplifiers/Kconfig b/drivers/iio/amplifiers/Kconfig
new file mode 100644
index 000000000000..05d707ed7d4f
--- /dev/null
+++ b/drivers/iio/amplifiers/Kconfig
@@ -0,0 +1,17 @@
+#
+# Gain Amplifiers, etc.
+#
+menu "Amplifiers"
+
+config AD8366
+	tristate "Analog Devices AD8366 VGA"
+	depends on SPI
+	select BITREVERSE
+	help
+	  Say yes here to build support for Analog Devices AD8366
+	  SPI Dual-Digital Variable Gain Amplifier (VGA).
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ad8366.
+
+endmenu
diff --git a/drivers/iio/amplifiers/Makefile b/drivers/iio/amplifiers/Makefile
new file mode 100644
index 000000000000..a6ca366908e0
--- /dev/null
+++ b/drivers/iio/amplifiers/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile iio/amplifiers
+#
+
+obj-$(CONFIG_AD8366) += ad8366.o
diff --git a/drivers/iio/amplifiers/ad8366.c b/drivers/iio/amplifiers/ad8366.c
new file mode 100644
index 000000000000..d8281cdbfc4a
--- /dev/null
+++ b/drivers/iio/amplifiers/ad8366.c
@@ -0,0 +1,222 @@
+/*
+ * AD8366 SPI Dual-Digital Variable Gain Amplifier (VGA)
+ *
+ * Copyright 2012 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/sysfs.h>
+#include <linux/spi/spi.h>
+#include <linux/regulator/consumer.h>
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/bitrev.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+
+struct ad8366_state {
+	struct spi_device	*spi;
+	struct regulator	*reg;
+	unsigned char		ch[2];
+	/*
+	 * DMA (thus cache coherency maintenance) requires the
+	 * transfer buffers to live in their own cache lines.
+	 */
+	unsigned char		data[2] ____cacheline_aligned;
+};
+
+static int ad8366_write(struct iio_dev *indio_dev,
+			unsigned char ch_a, char unsigned ch_b)
+{
+	struct ad8366_state *st = iio_priv(indio_dev);
+	int ret;
+
+	ch_a = bitrev8(ch_a & 0x3F);
+	ch_b = bitrev8(ch_b & 0x3F);
+
+	st->data[0] = ch_b >> 4;
+	st->data[1] = (ch_b << 4) | (ch_a >> 2);
+
+	ret = spi_write(st->spi, st->data, ARRAY_SIZE(st->data));
+	if (ret < 0)
+		dev_err(&indio_dev->dev, "write failed (%d)", ret);
+
+	return ret;
+}
+
+static int ad8366_read_raw(struct iio_dev *indio_dev,
+			   struct iio_chan_spec const *chan,
+			   int *val,
+			   int *val2,
+			   long m)
+{
+	struct ad8366_state *st = iio_priv(indio_dev);
+	int ret;
+	unsigned code;
+
+	mutex_lock(&indio_dev->mlock);
+	switch (m) {
+	case IIO_CHAN_INFO_HARDWAREGAIN:
+		code = st->ch[chan->channel];
+
+		/* Values in dB */
+		code = code * 253 + 4500;
+		*val = code / 1000;
+		*val2 = (code % 1000) * 1000;
+
+		ret = IIO_VAL_INT_PLUS_MICRO_DB;
+		break;
+	default:
+		ret = -EINVAL;
+	}
+	mutex_unlock(&indio_dev->mlock);
+
+	return ret;
+};
+
+static int ad8366_write_raw(struct iio_dev *indio_dev,
+			    struct iio_chan_spec const *chan,
+			    int val,
+			    int val2,
+			    long mask)
+{
+	struct ad8366_state *st = iio_priv(indio_dev);
+	unsigned code;
+	int ret;
+
+	if (val < 0 || val2 < 0)
+		return -EINVAL;
+
+	/* Values in dB */
+	code = (((u8)val * 1000) + ((u32)val2 / 1000));
+
+	if (code > 20500 || code < 4500)
+		return -EINVAL;
+
+	code = (code - 4500) / 253;
+
+	mutex_lock(&indio_dev->mlock);
+	switch (mask) {
+	case IIO_CHAN_INFO_HARDWAREGAIN:
+		st->ch[chan->channel] = code;
+		ret = ad8366_write(indio_dev, st->ch[0], st->ch[1]);
+		break;
+	default:
+		ret = -EINVAL;
+	}
+	mutex_unlock(&indio_dev->mlock);
+
+	return ret;
+}
+
+static const struct iio_info ad8366_info = {
+	.read_raw = &ad8366_read_raw,
+	.write_raw = &ad8366_write_raw,
+	.driver_module = THIS_MODULE,
+};
+
+#define AD8366_CHAN(_channel) {				\
+	.type = IIO_VOLTAGE,				\
+	.output = 1,					\
+	.indexed = 1,					\
+	.channel = _channel,				\
+	.info_mask = IIO_CHAN_INFO_HARDWAREGAIN_SEPARATE_BIT,\
+}
+
+static const struct iio_chan_spec ad8366_channels[] = {
+	AD8366_CHAN(0),
+	AD8366_CHAN(1),
+};
+
+static int __devinit ad8366_probe(struct spi_device *spi)
+{
+	struct iio_dev *indio_dev;
+	struct ad8366_state *st;
+	int ret;
+
+	indio_dev = iio_device_alloc(sizeof(*st));
+	if (indio_dev == NULL)
+		return -ENOMEM;
+
+	st = iio_priv(indio_dev);
+
+	st->reg = regulator_get(&spi->dev, "vcc");
+	if (!IS_ERR(st->reg)) {
+		ret = regulator_enable(st->reg);
+		if (ret)
+			goto error_put_reg;
+	}
+
+	spi_set_drvdata(spi, indio_dev);
+	st->spi = spi;
+
+	indio_dev->dev.parent = &spi->dev;
+	indio_dev->name = spi_get_device_id(spi)->name;
+	indio_dev->info = &ad8366_info;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->channels = ad8366_channels;
+	indio_dev->num_channels = ARRAY_SIZE(ad8366_channels);
+
+	ret = iio_device_register(indio_dev);
+	if (ret)
+		goto error_disable_reg;
+
+	ad8366_write(indio_dev, 0 , 0);
+
+	return 0;
+
+error_disable_reg:
+	if (!IS_ERR(st->reg))
+		regulator_disable(st->reg);
+error_put_reg:
+	if (!IS_ERR(st->reg))
+		regulator_put(st->reg);
+
+	iio_device_free(indio_dev);
+
+	return ret;
+}
+
+static int __devexit ad8366_remove(struct spi_device *spi)
+{
+	struct iio_dev *indio_dev = spi_get_drvdata(spi);
+	struct ad8366_state *st = iio_priv(indio_dev);
+	struct regulator *reg = st->reg;
+
+	iio_device_unregister(indio_dev);
+
+	if (!IS_ERR(reg)) {
+		regulator_disable(reg);
+		regulator_put(reg);
+	}
+
+	iio_device_free(indio_dev);
+
+	return 0;
+}
+
+static const struct spi_device_id ad8366_id[] = {
+	{"ad8366", 0},
+	{}
+};
+
+static struct spi_driver ad8366_driver = {
+	.driver = {
+		.name	= KBUILD_MODNAME,
+		.owner	= THIS_MODULE,
+	},
+	.probe		= ad8366_probe,
+	.remove		= __devexit_p(ad8366_remove),
+	.id_table	= ad8366_id,
+};
+
+module_spi_driver(ad8366_driver);
+
+MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
+MODULE_DESCRIPTION("Analog Devices AD8366 VGA");
+MODULE_LICENSE("GPL v2");