diff options
Diffstat (limited to 'drivers')
34 files changed, 4100 insertions, 524 deletions
diff --git a/drivers/platform/olpc/olpc-xo175-ec.c b/drivers/platform/olpc/olpc-xo175-ec.c index 83ed1fbf73cf..5e1d14e35f20 100644 --- a/drivers/platform/olpc/olpc-xo175-ec.c +++ b/drivers/platform/olpc/olpc-xo175-ec.c @@ -410,7 +410,7 @@ static void olpc_xo175_ec_complete(void *arg) dev_dbg(dev, "got event %.2x\n", byte); switch (byte) { case EVENT_AC_CHANGE: - psy = power_supply_get_by_name("olpc-ac"); + psy = power_supply_get_by_name("olpc_ac"); if (psy) { power_supply_changed(psy); power_supply_put(psy); @@ -420,7 +420,7 @@ static void olpc_xo175_ec_complete(void *arg) case EVENT_BATTERY_CRITICAL: case EVENT_BATTERY_SOC_CHANGE: case EVENT_BATTERY_ERROR: - psy = power_supply_get_by_name("olpc-battery"); + psy = power_supply_get_by_name("olpc_battery"); if (psy) { power_supply_changed(psy); power_supply_put(psy); diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig index df479c49be49..f07b982c8dff 100644 --- a/drivers/power/reset/Kconfig +++ b/drivers/power/reset/Kconfig @@ -123,6 +123,13 @@ config POWER_RESET_OCELOT_RESET help This driver supports restart for Microsemi Ocelot SoC. +config POWER_RESET_OXNAS + bool "OXNAS SoC restart driver" + depends on ARCH_OXNAS + default MACH_OX820 + help + Restart support for OXNAS/PLXTECH OX820 SoC. + config POWER_RESET_PIIX4_POWEROFF tristate "Intel PIIX4 power-off driver" depends on PCI diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile index da37f8b851dc..5710ca469517 100644 --- a/drivers/power/reset/Makefile +++ b/drivers/power/reset/Makefile @@ -12,6 +12,7 @@ obj-$(CONFIG_POWER_RESET_GPIO_RESTART) += gpio-restart.o obj-$(CONFIG_POWER_RESET_HISI) += hisi-reboot.o obj-$(CONFIG_POWER_RESET_MSM) += msm-poweroff.o obj-$(CONFIG_POWER_RESET_MT6323) += mt6323-poweroff.o +obj-$(CONFIG_POWER_RESET_OXNAS) += oxnas-restart.o obj-$(CONFIG_POWER_RESET_QCOM_PON) += qcom-pon.o obj-$(CONFIG_POWER_RESET_OCELOT_RESET) += ocelot-reset.o obj-$(CONFIG_POWER_RESET_PIIX4_POWEROFF) += piix4-poweroff.o diff --git a/drivers/power/reset/gpio-poweroff.c b/drivers/power/reset/gpio-poweroff.c index 6a4bbb506551..c5067eb75370 100644 --- a/drivers/power/reset/gpio-poweroff.c +++ b/drivers/power/reset/gpio-poweroff.c @@ -54,7 +54,7 @@ static int gpio_poweroff_probe(struct platform_device *pdev) /* If a pm_power_off function has already been added, leave it alone */ if (pm_power_off != NULL) { dev_err(&pdev->dev, - "%s: pm_power_off function already registered", + "%s: pm_power_off function already registered\n", __func__); return -EBUSY; } diff --git a/drivers/power/reset/ltc2952-poweroff.c b/drivers/power/reset/ltc2952-poweroff.c index e4a0cc45b3d1..318927938b05 100644 --- a/drivers/power/reset/ltc2952-poweroff.c +++ b/drivers/power/reset/ltc2952-poweroff.c @@ -94,7 +94,6 @@ static enum hrtimer_restart ltc2952_poweroff_timer_wde(struct hrtimer *timer) { ktime_t now; int state; - unsigned long overruns; struct ltc2952_poweroff *data = to_ltc2952(timer, timer_wde); if (data->kernel_panic) @@ -104,7 +103,7 @@ static enum hrtimer_restart ltc2952_poweroff_timer_wde(struct hrtimer *timer) gpiod_set_value(data->gpio_watchdog, !state); now = hrtimer_cb_get_time(timer); - overruns = hrtimer_forward(timer, now, data->wde_interval); + hrtimer_forward(timer, now, data->wde_interval); return HRTIMER_RESTART; } diff --git a/drivers/power/reset/oxnas-restart.c b/drivers/power/reset/oxnas-restart.c new file mode 100644 index 000000000000..13090bec058a --- /dev/null +++ b/drivers/power/reset/oxnas-restart.c @@ -0,0 +1,233 @@ +// SPDX-License-Identifier: (GPL-2.0) +/* + * oxnas SoC reset driver + * based on: + * Microsemi MIPS SoC reset driver + * and ox820_assert_system_reset() written by Ma Hajun <mahaijuns@gmail.com> + * + * Copyright (c) 2013 Ma Hajun <mahaijuns@gmail.com> + * Copyright (c) 2017 Microsemi Corporation + * Copyright (c) 2020 Daniel Golle <daniel@makrotopia.org> + */ +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/notifier.h> +#include <linux/mfd/syscon.h> +#include <linux/of_address.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/reboot.h> +#include <linux/regmap.h> + +/* bit numbers of reset control register */ +#define OX820_SYS_CTRL_RST_SCU 0 +#define OX820_SYS_CTRL_RST_COPRO 1 +#define OX820_SYS_CTRL_RST_ARM0 2 +#define OX820_SYS_CTRL_RST_ARM1 3 +#define OX820_SYS_CTRL_RST_USBHS 4 +#define OX820_SYS_CTRL_RST_USBHSPHYA 5 +#define OX820_SYS_CTRL_RST_MACA 6 +#define OX820_SYS_CTRL_RST_MAC OX820_SYS_CTRL_RST_MACA +#define OX820_SYS_CTRL_RST_PCIEA 7 +#define OX820_SYS_CTRL_RST_SGDMA 8 +#define OX820_SYS_CTRL_RST_CIPHER 9 +#define OX820_SYS_CTRL_RST_DDR 10 +#define OX820_SYS_CTRL_RST_SATA 11 +#define OX820_SYS_CTRL_RST_SATA_LINK 12 +#define OX820_SYS_CTRL_RST_SATA_PHY 13 +#define OX820_SYS_CTRL_RST_PCIEPHY 14 +#define OX820_SYS_CTRL_RST_STATIC 15 +#define OX820_SYS_CTRL_RST_GPIO 16 +#define OX820_SYS_CTRL_RST_UART1 17 +#define OX820_SYS_CTRL_RST_UART2 18 +#define OX820_SYS_CTRL_RST_MISC 19 +#define OX820_SYS_CTRL_RST_I2S 20 +#define OX820_SYS_CTRL_RST_SD 21 +#define OX820_SYS_CTRL_RST_MACB 22 +#define OX820_SYS_CTRL_RST_PCIEB 23 +#define OX820_SYS_CTRL_RST_VIDEO 24 +#define OX820_SYS_CTRL_RST_DDR_PHY 25 +#define OX820_SYS_CTRL_RST_USBHSPHYB 26 +#define OX820_SYS_CTRL_RST_USBDEV 27 +#define OX820_SYS_CTRL_RST_ARMDBG 29 +#define OX820_SYS_CTRL_RST_PLLA 30 +#define OX820_SYS_CTRL_RST_PLLB 31 + +/* bit numbers of clock control register */ +#define OX820_SYS_CTRL_CLK_COPRO 0 +#define OX820_SYS_CTRL_CLK_DMA 1 +#define OX820_SYS_CTRL_CLK_CIPHER 2 +#define OX820_SYS_CTRL_CLK_SD 3 +#define OX820_SYS_CTRL_CLK_SATA 4 +#define OX820_SYS_CTRL_CLK_I2S 5 +#define OX820_SYS_CTRL_CLK_USBHS 6 +#define OX820_SYS_CTRL_CLK_MACA 7 +#define OX820_SYS_CTRL_CLK_MAC OX820_SYS_CTRL_CLK_MACA +#define OX820_SYS_CTRL_CLK_PCIEA 8 +#define OX820_SYS_CTRL_CLK_STATIC 9 +#define OX820_SYS_CTRL_CLK_MACB 10 +#define OX820_SYS_CTRL_CLK_PCIEB 11 +#define OX820_SYS_CTRL_CLK_REF600 12 +#define OX820_SYS_CTRL_CLK_USBDEV 13 +#define OX820_SYS_CTRL_CLK_DDR 14 +#define OX820_SYS_CTRL_CLK_DDRPHY 15 +#define OX820_SYS_CTRL_CLK_DDRCK 16 + +/* Regmap offsets */ +#define OX820_CLK_SET_REGOFFSET 0x2c +#define OX820_CLK_CLR_REGOFFSET 0x30 +#define OX820_RST_SET_REGOFFSET 0x34 +#define OX820_RST_CLR_REGOFFSET 0x38 +#define OX820_SECONDARY_SEL_REGOFFSET 0x14 +#define OX820_TERTIARY_SEL_REGOFFSET 0x8c +#define OX820_QUATERNARY_SEL_REGOFFSET 0x94 +#define OX820_DEBUG_SEL_REGOFFSET 0x9c +#define OX820_ALTERNATIVE_SEL_REGOFFSET 0xa4 +#define OX820_PULLUP_SEL_REGOFFSET 0xac +#define OX820_SEC_SECONDARY_SEL_REGOFFSET 0x100014 +#define OX820_SEC_TERTIARY_SEL_REGOFFSET 0x10008c +#define OX820_SEC_QUATERNARY_SEL_REGOFFSET 0x100094 +#define OX820_SEC_DEBUG_SEL_REGOFFSET 0x10009c +#define OX820_SEC_ALTERNATIVE_SEL_REGOFFSET 0x1000a4 +#define OX820_SEC_PULLUP_SEL_REGOFFSET 0x1000ac + +struct oxnas_restart_context { + struct regmap *sys_ctrl; + struct notifier_block restart_handler; +}; + +static int ox820_restart_handle(struct notifier_block *this, + unsigned long mode, void *cmd) +{ + struct oxnas_restart_context *ctx = container_of(this, struct + oxnas_restart_context, + restart_handler); + u32 value; + + /* + * Assert reset to cores as per power on defaults + * Don't touch the DDR interface as things will come to an impromptu + * stop NB Possibly should be asserting reset for PLLB, but there are + * timing concerns here according to the docs + */ + value = BIT(OX820_SYS_CTRL_RST_COPRO) | + BIT(OX820_SYS_CTRL_RST_USBHS) | + BIT(OX820_SYS_CTRL_RST_USBHSPHYA) | + BIT(OX820_SYS_CTRL_RST_MACA) | + BIT(OX820_SYS_CTRL_RST_PCIEA) | + BIT(OX820_SYS_CTRL_RST_SGDMA) | + BIT(OX820_SYS_CTRL_RST_CIPHER) | + BIT(OX820_SYS_CTRL_RST_SATA) | + BIT(OX820_SYS_CTRL_RST_SATA_LINK) | + BIT(OX820_SYS_CTRL_RST_SATA_PHY) | + BIT(OX820_SYS_CTRL_RST_PCIEPHY) | + BIT(OX820_SYS_CTRL_RST_STATIC) | + BIT(OX820_SYS_CTRL_RST_UART1) | + BIT(OX820_SYS_CTRL_RST_UART2) | + BIT(OX820_SYS_CTRL_RST_MISC) | + BIT(OX820_SYS_CTRL_RST_I2S) | + BIT(OX820_SYS_CTRL_RST_SD) | + BIT(OX820_SYS_CTRL_RST_MACB) | + BIT(OX820_SYS_CTRL_RST_PCIEB) | + BIT(OX820_SYS_CTRL_RST_VIDEO) | + BIT(OX820_SYS_CTRL_RST_USBHSPHYB) | + BIT(OX820_SYS_CTRL_RST_USBDEV); + + regmap_write(ctx->sys_ctrl, OX820_RST_SET_REGOFFSET, value); + + /* Release reset to cores as per power on defaults */ + regmap_write(ctx->sys_ctrl, OX820_RST_CLR_REGOFFSET, + BIT(OX820_SYS_CTRL_RST_GPIO)); + + /* + * Disable clocks to cores as per power-on defaults - must leave DDR + * related clocks enabled otherwise we'll stop rather abruptly. + */ + value = BIT(OX820_SYS_CTRL_CLK_COPRO) | + BIT(OX820_SYS_CTRL_CLK_DMA) | + BIT(OX820_SYS_CTRL_CLK_CIPHER) | + BIT(OX820_SYS_CTRL_CLK_SD) | + BIT(OX820_SYS_CTRL_CLK_SATA) | + BIT(OX820_SYS_CTRL_CLK_I2S) | + BIT(OX820_SYS_CTRL_CLK_USBHS) | + BIT(OX820_SYS_CTRL_CLK_MAC) | + BIT(OX820_SYS_CTRL_CLK_PCIEA) | + BIT(OX820_SYS_CTRL_CLK_STATIC) | + BIT(OX820_SYS_CTRL_CLK_MACB) | + BIT(OX820_SYS_CTRL_CLK_PCIEB) | + BIT(OX820_SYS_CTRL_CLK_REF600) | + BIT(OX820_SYS_CTRL_CLK_USBDEV); + + regmap_write(ctx->sys_ctrl, OX820_CLK_CLR_REGOFFSET, value); + + /* Enable clocks to cores as per power-on defaults */ + + /* Set sys-control pin mux'ing as per power-on defaults */ + regmap_write(ctx->sys_ctrl, OX820_SECONDARY_SEL_REGOFFSET, 0); + regmap_write(ctx->sys_ctrl, OX820_TERTIARY_SEL_REGOFFSET, 0); + regmap_write(ctx->sys_ctrl, OX820_QUATERNARY_SEL_REGOFFSET, 0); + regmap_write(ctx->sys_ctrl, OX820_DEBUG_SEL_REGOFFSET, 0); + regmap_write(ctx->sys_ctrl, OX820_ALTERNATIVE_SEL_REGOFFSET, 0); + regmap_write(ctx->sys_ctrl, OX820_PULLUP_SEL_REGOFFSET, 0); + + regmap_write(ctx->sys_ctrl, OX820_SEC_SECONDARY_SEL_REGOFFSET, 0); + regmap_write(ctx->sys_ctrl, OX820_SEC_TERTIARY_SEL_REGOFFSET, 0); + regmap_write(ctx->sys_ctrl, OX820_SEC_QUATERNARY_SEL_REGOFFSET, 0); + regmap_write(ctx->sys_ctrl, OX820_SEC_DEBUG_SEL_REGOFFSET, 0); + regmap_write(ctx->sys_ctrl, OX820_SEC_ALTERNATIVE_SEL_REGOFFSET, 0); + regmap_write(ctx->sys_ctrl, OX820_SEC_PULLUP_SEL_REGOFFSET, 0); + + /* + * No need to save any state, as the ROM loader can determine whether + * reset is due to power cycling or programatic action, just hit the + * (self-clearing) CPU reset bit of the block reset register + */ + value = + BIT(OX820_SYS_CTRL_RST_SCU) | + BIT(OX820_SYS_CTRL_RST_ARM0) | + BIT(OX820_SYS_CTRL_RST_ARM1); + + regmap_write(ctx->sys_ctrl, OX820_RST_SET_REGOFFSET, value); + + pr_emerg("Unable to restart system\n"); + return NOTIFY_DONE; +} + +static int ox820_restart_probe(struct platform_device *pdev) +{ + struct oxnas_restart_context *ctx; + struct regmap *sys_ctrl; + struct device *dev = &pdev->dev; + int err = 0; + + sys_ctrl = syscon_node_to_regmap(pdev->dev.of_node); + if (IS_ERR(sys_ctrl)) + return PTR_ERR(sys_ctrl); + + ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL); + if (!ctx) + return -ENOMEM; + + ctx->sys_ctrl = sys_ctrl; + ctx->restart_handler.notifier_call = ox820_restart_handle; + ctx->restart_handler.priority = 192; + err = register_restart_handler(&ctx->restart_handler); + if (err) + dev_err(dev, "can't register restart notifier (err=%d)\n", err); + + return err; +} + +static const struct of_device_id ox820_restart_of_match[] = { + { .compatible = "oxsemi,ox820-sys-ctrl" }, + {} +}; + +static struct platform_driver ox820_restart_driver = { + .probe = ox820_restart_probe, + .driver = { + .name = "ox820-chip-reset", + .of_match_table = ox820_restart_of_match, + }, +}; +builtin_platform_driver(ox820_restart_driver); diff --git a/drivers/power/reset/qcom-pon.c b/drivers/power/reset/qcom-pon.c index 22a743a0bf28..4a688741a88a 100644 --- a/drivers/power/reset/qcom-pon.c +++ b/drivers/power/reset/qcom-pon.c @@ -34,7 +34,8 @@ static int pm8916_reboot_mode_write(struct reboot_mode_driver *reboot, ret = regmap_update_bits(pon->regmap, pon->baseaddr + PON_SOFT_RB_SPARE, - 0xfc, magic << pon->reason_shift); + GENMASK(7, pon->reason_shift), + magic << pon->reason_shift); if (ret < 0) dev_err(pon->dev, "update reboot mode bits failed\n"); diff --git a/drivers/power/reset/syscon-reboot.c b/drivers/power/reset/syscon-reboot.c index 62fbba0df971..510e363381ca 100644 --- a/drivers/power/reset/syscon-reboot.c +++ b/drivers/power/reset/syscon-reboot.c @@ -51,8 +51,11 @@ static int syscon_reboot_probe(struct platform_device *pdev) return -ENOMEM; ctx->map = syscon_regmap_lookup_by_phandle(dev->of_node, "regmap"); - if (IS_ERR(ctx->map)) - return PTR_ERR(ctx->map); + if (IS_ERR(ctx->map)) { + ctx->map = syscon_node_to_regmap(dev->parent->of_node); + if (IS_ERR(ctx->map)) + return PTR_ERR(ctx->map); + } if (of_property_read_u32(pdev->dev.of_node, "offset", &ctx->offset)) return -EINVAL; diff --git a/drivers/power/supply/88pm860x_battery.c b/drivers/power/supply/88pm860x_battery.c index 5ca047b3f58f..1308f3a185f3 100644 --- a/drivers/power/supply/88pm860x_battery.c +++ b/drivers/power/supply/88pm860x_battery.c @@ -919,16 +919,12 @@ static int pm860x_battery_probe(struct platform_device *pdev) return -ENOMEM; info->irq_cc = platform_get_irq(pdev, 0); - if (info->irq_cc <= 0) { - dev_err(&pdev->dev, "No IRQ resource!\n"); + if (info->irq_cc <= 0) return -EINVAL; - } info->irq_batt = platform_get_irq(pdev, 1); - if (info->irq_batt <= 0) { - dev_err(&pdev->dev, "No IRQ resource!\n"); + if (info->irq_batt <= 0) return -EINVAL; - } info->chip = chip; info->i2c = diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig index a46643f5e2fb..44d3c8512fb8 100644 --- a/drivers/power/supply/Kconfig +++ b/drivers/power/supply/Kconfig @@ -116,6 +116,17 @@ config BATTERY_CPCAP Say Y here to enable support for battery on Motorola phones and tablets such as droid 4. +config BATTERY_CW2015 + tristate "CW2015 Battery driver" + depends on I2C + select REGMAP_I2C + help + Say Y here to enable support for the cellwise cw2015 + battery fuel gauge (used in the Pinebook Pro & others) + + This driver can also be built as a module. If so, the module will be + called cw2015_battery. + config BATTERY_DS2760 tristate "DS2760 battery driver (HP iPAQ & others)" depends on W1 @@ -415,7 +426,7 @@ config CHARGER_PCF50633 tristate "NXP PCF50633 MBC" depends on MFD_PCF50633 help - Say Y to include support for NXP PCF50633 Main Battery Charger. + Say Y to include support for NXP PCF50633 Main Battery Charger. config BATTERY_RX51 tristate "Nokia RX-51 (N900) battery driver" @@ -587,7 +598,7 @@ config CHARGER_BQ24257 tristate "TI BQ24250/24251/24257 battery charger driver" depends on I2C depends on GPIOLIB || COMPILE_TEST - depends on REGMAP_I2C + select REGMAP_I2C help Say Y to enable support for the TI BQ24250, BQ24251, and BQ24257 battery chargers. @@ -619,15 +630,15 @@ config CHARGER_TPS65090 tristate "TPS65090 battery charger driver" depends on MFD_TPS65090 help - Say Y here to enable support for battery charging with TPS65090 - PMIC chips. + Say Y here to enable support for battery charging with TPS65090 + PMIC chips. config CHARGER_TPS65217 tristate "TPS65217 battery charger driver" depends on MFD_TPS65217 help - Say Y here to enable support for battery charging with TPS65217 - PMIC chips. + Say Y here to enable support for battery charging with TPS65217 + PMIC chips. config BATTERY_GAUGE_LTC2941 tristate "LTC2941/LTC2943 Battery Gauge Driver" @@ -670,7 +681,6 @@ config CHARGER_RT9455 config CHARGER_CROS_USBPD tristate "ChromeOS EC based USBPD charger" depends on CROS_USBPD_NOTIFY - default n help Say Y here to enable ChromeOS EC based USBPD charger driver. This driver gets various bits of information about @@ -681,16 +691,16 @@ config CHARGER_SC2731 tristate "Spreadtrum SC2731 charger driver" depends on MFD_SC27XX_PMIC || COMPILE_TEST help - Say Y here to enable support for battery charging with SC2731 - PMIC chips. + Say Y here to enable support for battery charging with SC2731 + PMIC chips. config FUEL_GAUGE_SC27XX tristate "Spreadtrum SC27XX fuel gauge driver" depends on MFD_SC27XX_PMIC || COMPILE_TEST depends on IIO help - Say Y here to enable support for fuel gauge with SC27XX - PMIC chips. + Say Y here to enable support for fuel gauge with SC27XX + PMIC chips. config CHARGER_UCS1002 tristate "Microchip UCS1002 USB Port Power Controller" @@ -705,11 +715,20 @@ config CHARGER_UCS1002 config CHARGER_BD70528 tristate "ROHM bd70528 charger driver" depends on MFD_ROHM_BD70528 - default n + select LINEAR_RANGES + help + Say Y here to enable support for getting battery status + information and altering charger configurations from charger + block of the ROHM BD70528 Power Management IC. + +config CHARGER_BD99954 + tristate "ROHM bd99954 charger driver" + depends on I2C + select LINEAR_RANGES help - Say Y here to enable support for getting battery status - information and altering charger configurations from charger - block of the ROHM BD70528 Power Management IC. + Say Y here to enable support for getting battery and charger + information and altering charger configurations from the ROHM + BD99954 charger IC. config CHARGER_WILCO tristate "Wilco EC based charger for ChromeOS" diff --git a/drivers/power/supply/Makefile b/drivers/power/supply/Makefile index 41cb64f09e49..b9644663e435 100644 --- a/drivers/power/supply/Makefile +++ b/drivers/power/supply/Makefile @@ -24,6 +24,7 @@ obj-$(CONFIG_BATTERY_ACT8945A) += act8945a_charger.o obj-$(CONFIG_BATTERY_AXP20X) += axp20x_battery.o obj-$(CONFIG_CHARGER_AXP20X) += axp20x_ac_power.o obj-$(CONFIG_BATTERY_CPCAP) += cpcap-battery.o +obj-$(CONFIG_BATTERY_CW2015) += cw2015_battery.o obj-$(CONFIG_BATTERY_DS2760) += ds2760_battery.o obj-$(CONFIG_BATTERY_DS2780) += ds2780_battery.o obj-$(CONFIG_BATTERY_DS2781) += ds2781_battery.o @@ -92,4 +93,5 @@ obj-$(CONFIG_CHARGER_SC2731) += sc2731_charger.o obj-$(CONFIG_FUEL_GAUGE_SC27XX) += sc27xx_fuel_gauge.o obj-$(CONFIG_CHARGER_UCS1002) += ucs1002_power.o obj-$(CONFIG_CHARGER_BD70528) += bd70528-charger.o +obj-$(CONFIG_CHARGER_BD99954) += bd99954-charger.o obj-$(CONFIG_CHARGER_WILCO) += wilco-charger.o diff --git a/drivers/power/supply/ab8500_fg.c b/drivers/power/supply/ab8500_fg.c index b96f90a82ecf..751c4f6c7487 100644 --- a/drivers/power/supply/ab8500_fg.c +++ b/drivers/power/supply/ab8500_fg.c @@ -2399,7 +2399,7 @@ static void ab8500_fg_reinit_work(struct work_struct *work) struct ab8500_fg *di = container_of(work, struct ab8500_fg, fg_reinit_work.work); - if (di->flags.calibrate == false) { + if (!di->flags.calibrate) { dev_dbg(di->dev, "Resetting FG state machine to init.\n"); ab8500_fg_clear_cap_samples(di); ab8500_fg_calc_cap_discharge_voltage(di, true); diff --git a/drivers/power/supply/axp288_charger.c b/drivers/power/supply/axp288_charger.c index cf4c67b2d235..9d981b76c1e7 100644 --- a/drivers/power/supply/axp288_charger.c +++ b/drivers/power/supply/axp288_charger.c @@ -880,10 +880,9 @@ static int axp288_charger_probe(struct platform_device *pdev) /* Register charger interrupts */ for (i = 0; i < CHRG_INTR_END; i++) { pirq = platform_get_irq(info->pdev, i); - if (pirq < 0) { - dev_err(&pdev->dev, "Failed to get IRQ: %d\n", pirq); + if (pirq < 0) return pirq; - } + info->irq[i] = regmap_irq_get_virq(info->regmap_irqc, pirq); if (info->irq[i] < 0) { dev_warn(&info->pdev->dev, diff --git a/drivers/power/supply/axp288_fuel_gauge.c b/drivers/power/supply/axp288_fuel_gauge.c index f40fa0e63b6e..148eb8105803 100644 --- a/drivers/power/supply/axp288_fuel_gauge.c +++ b/drivers/power/supply/axp288_fuel_gauge.c @@ -718,6 +718,12 @@ static const struct dmi_system_id axp288_fuel_gauge_blacklist[] = { }, }, { + /* Meegopad T02 */ + .matches = { + DMI_MATCH(DMI_PRODUCT_NAME, "MEEGOPAD T02"), + }, + }, + { /* Meegopad T08 */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Default string"), diff --git a/drivers/power/supply/bd70528-charger.c b/drivers/power/supply/bd70528-charger.c index 3b820110ecfa..7c1f0b99c71b 100644 --- a/drivers/power/supply/bd70528-charger.c +++ b/drivers/power/supply/bd70528-charger.c @@ -72,6 +72,7 @@ #include <linux/module.h> #include <linux/platform_device.h> #include <linux/power_supply.h> +#include <linux/linear_range.h> #define CHG_STAT_SUSPEND 0x0 #define CHG_STAT_TRICKLE 0x1 @@ -335,38 +336,37 @@ static int bd70528_get_present(struct bd70528_psy *bdpsy, int *val) return 0; } -struct bd70528_linear_range { - int min; - int step; - int vals; - int low_sel; -}; - -static const struct bd70528_linear_range current_limit_ranges[] = { +static const struct linear_range current_limit_ranges[] = { { .min = 5, .step = 1, - .vals = 36, - .low_sel = 0, + .min_sel = 0, + .max_sel = 0x22, }, { .min = 40, .step = 5, - .vals = 5, - .low_sel = 0x23, + .min_sel = 0x23, + .max_sel = 0x26, }, { .min = 60, .step = 20, - .vals = 8, - .low_sel = 0x27, + .min_sel = 0x27, + .max_sel = 0x2d, }, { .min = 200, .step = 50, - .vals = 7, - .low_sel = 0x2e, - } + .min_sel = 0x2e, + .max_sel = 0x34, + }, + { + .min = 500, + .step = 0, + .min_sel = 0x35, + .max_sel = 0x3f, + }, }; /* @@ -374,18 +374,18 @@ static const struct bd70528_linear_range current_limit_ranges[] = { * voltage for low temperatures. The driver currently only reads * the charge current at room temperature. We do set both though. */ -static const struct bd70528_linear_range warm_charge_curr[] = { +static const struct linear_range warm_charge_curr[] = { { .min = 10, .step = 10, - .vals = 20, - .low_sel = 0, + .min_sel = 0, + .max_sel = 0x12, }, { .min = 200, .step = 25, - .vals = 13, - .low_sel = 0x13, + .min_sel = 0x13, + .max_sel = 0x1f, }, }; @@ -398,56 +398,6 @@ static const struct bd70528_linear_range warm_charge_curr[] = { #define MAX_WARM_CHG_CURR_SEL 0x1f #define MIN_CHG_CURR_SEL 0x0 -static int find_value_for_selector_low(const struct bd70528_linear_range *r, - int selectors, unsigned int sel, - unsigned int *val) -{ - int i; - - for (i = 0; i < selectors; i++) { - if (r[i].low_sel <= sel && r[i].low_sel + r[i].vals >= sel) { - *val = r[i].min + (sel - r[i].low_sel) * r[i].step; - return 0; - } - } - return -EINVAL; -} - -/* - * For BD70528 voltage/current limits we happily accept any value which - * belongs the range. We could check if value matching the selector is - * desired by computing the range min + (sel - sel_low) * range step - but - * I guess it is enough if we use voltage/current which is closest (below) - * the requested? - */ -static int find_selector_for_value_low(const struct bd70528_linear_range *r, - int selectors, unsigned int val, - unsigned int *sel, bool *found) -{ - int i; - int ret = -EINVAL; - - *found = false; - for (i = 0; i < selectors; i++) { - if (r[i].min <= val) { - if (r[i].min + r[i].step * r[i].vals >= val) { - *found = true; - *sel = r[i].low_sel + (val - r[i].min) / - r[i].step; - ret = 0; - break; - } - /* - * If the range max is smaller than requested - * we can set the max supported value from range - */ - *sel = r[i].low_sel + r[i].vals; - ret = 0; - } - } - return ret; -} - static int get_charge_current(struct bd70528_psy *bdpsy, int *ma) { unsigned int sel; @@ -463,9 +413,9 @@ static int get_charge_current(struct bd70528_psy *bdpsy, int *ma) sel &= BD70528_MASK_CHG_CHG_CURR; - ret = find_value_for_selector_low(&warm_charge_curr[0], - ARRAY_SIZE(warm_charge_curr), sel, - ma); + ret = linear_range_get_value_array(&warm_charge_curr[0], + ARRAY_SIZE(warm_charge_curr), + sel, ma); if (ret) { dev_err(bdpsy->dev, "Unknown charge current value 0x%x\n", @@ -491,10 +441,9 @@ static int get_current_limit(struct bd70528_psy *bdpsy, int *ma) sel &= BD70528_MASK_CHG_DCIN_ILIM; - ret = find_value_for_selector_low(¤t_limit_ranges[0], - ARRAY_SIZE(current_limit_ranges), sel, - ma); - + ret = linear_range_get_value_array(¤t_limit_ranges[0], + ARRAY_SIZE(current_limit_ranges), + sel, ma); if (ret) { /* Unspecified values mean 500 mA */ *ma = 500; @@ -588,15 +537,28 @@ static int set_charge_current(struct bd70528_psy *bdpsy, int ma) goto set; } - ret = find_selector_for_value_low(&warm_charge_curr[0], - ARRAY_SIZE(warm_charge_curr), ma, - ®, &found); +/* + * For BD70528 voltage/current limits we happily accept any value which + * belongs the range. We could check if value matching the selector is + * desired by computing the range min + (sel - sel_low) * range step - but + * I guess it is enough if we use voltage/current which is closest (below) + * the requested? + */ + + ret = linear_range_get_selector_low_array(warm_charge_curr, + ARRAY_SIZE(warm_charge_curr), + ma, ®, &found); if (ret) { + dev_err(bdpsy->dev, + "Unsupported charge current %u mA\n", ma); reg = MIN_CHG_CURR_SEL; goto set; } if (!found) { - /* There was a gap in supported values and we hit it */ + /* + * There was a gap in supported values and we hit it. + * Yet a smaller value was found so we use it. + */ dev_warn(bdpsy->dev, "Unsupported charge current %u mA\n", ma); } @@ -648,17 +610,21 @@ static int set_current_limit(struct bd70528_psy *bdpsy, int ma) goto set; } - ret = find_selector_for_value_low(¤t_limit_ranges[0], - ARRAY_SIZE(current_limit_ranges), ma, - ®, &found); + ret = linear_range_get_selector_low_array(current_limit_ranges, + ARRAY_SIZE(current_limit_ranges), + ma, ®, &found); if (ret) { + dev_err(bdpsy->dev, "Unsupported current limit %umA\n", ma); reg = MIN_CURR_LIMIT_SEL; goto set; } if (!found) { - /* There was a gap in supported values and we hit it ?*/ - dev_warn(bdpsy->dev, "Unsupported current limit %umA\n", - ma); + /* + * There was a gap in supported values and we hit it. + * We found a smaller value from ranges and use it. + * Warn user though. + */ + dev_warn(bdpsy->dev, "Unsupported current limit %umA\n", ma); } set: diff --git a/drivers/power/supply/bd99954-charger.c b/drivers/power/supply/bd99954-charger.c new file mode 100644 index 000000000000..ffd8bfa08179 --- /dev/null +++ b/drivers/power/supply/bd99954-charger.c @@ -0,0 +1,1142 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * ROHM BD99954 charger driver + * + * Copyright (C) 2020 Rohm Semiconductors + * Originally written by: + * Mikko Mutanen <mikko.mutanen@fi.rohmeurope.com> + * Markus Laine <markus.laine@fi.rohmeurope.com> + * Bugs added by: + * Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> + */ + +/* + * The battery charging profile of BD99954. + * + * Curve (1) represents charging current. + * Curve (2) represents battery voltage. + * + * The BD99954 data sheet divides charging to three phases. + * a) Trickle-charge with constant current (8). + * b) pre-charge with constant current (6) + * c) fast-charge, first with constant current (5) phase. After + * the battery voltage has reached target level (4) we have constant + * voltage phase until charging current has dropped to termination + * level (7) + * + * V ^ ^ I + * . . + * . . + *(4)` `.` ` ` ` ` ` ` ` ` ` ` ` ` ` ----------------------------. + * . :/ . + * . o----+/:/ ` ` ` ` ` ` ` ` ` ` ` ` `.` ` (5) + * . + :: + . + * . + /- -- . + * . +`/- + . + * . o/- -: . + * . .s. +` . + * . .--+ `/ . + * . ..`` + .: . + * . -` + -- . + * . (2) ...`` + :- . + * . ...`` + -: . + *(3)` `.`."" ` ` ` `+-------- ` ` ` ` ` ` `.:` ` ` ` ` ` ` ` ` .` ` (6) + * . + `:. . + * . + -: . + * . + -:. . + * . + .--. . + * . (1) + `.+` ` ` `.` ` (7) + * -..............` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` + ` ` ` .` ` (8) + * . + - + * -------------------------------------------------+++++++++--> + * | trickle | pre | fast | + * + * Details of DT properties for different limits can be found from BD99954 + * device tree binding documentation. + */ + +#include <linux/delay.h> +#include <linux/gpio/consumer.h> +#include <linux/interrupt.h> +#include <linux/i2c.h> +#include <linux/kernel.h> +#include <linux/linear_range.h> +#include <linux/module.h> +#include <linux/mod_devicetable.h> +#include <linux/power_supply.h> +#include <linux/property.h> +#include <linux/regmap.h> +#include <linux/types.h> + +#include "bd99954-charger.h" + +struct battery_data { + u16 precharge_current; /* Trickle-charge Current */ + u16 fc_reg_voltage; /* Fast Charging Regulation Voltage */ + u16 voltage_min; + u16 voltage_max; +}; + +/* Initial field values, converted to initial register values */ +struct bd9995x_init_data { + u16 vsysreg_set; /* VSYS Regulation Setting */ + u16 ibus_lim_set; /* VBUS input current limitation */ + u16 icc_lim_set; /* VCC/VACP Input Current Limit Setting */ + u16 itrich_set; /* Trickle-charge Current Setting */ + u16 iprech_set; /* Pre-Charge Current Setting */ + u16 ichg_set; /* Fast-Charge constant current */ + u16 vfastchg_reg_set1; /* Fast Charging Regulation Voltage */ + u16 vprechg_th_set; /* Pre-charge Voltage Threshold Setting */ + u16 vrechg_set; /* Re-charge Battery Voltage Setting */ + u16 vbatovp_set; /* Battery Over Voltage Threshold Setting */ + u16 iterm_set; /* Charging termination current */ +}; + +struct bd9995x_state { + u8 online; + u16 chgstm_status; + u16 vbat_vsys_status; + u16 vbus_vcc_status; +}; + +struct bd9995x_device { + struct i2c_client *client; + struct device *dev; + struct power_supply *charger; + + struct regmap *rmap; + struct regmap_field *rmap_fields[F_MAX_FIELDS]; + + int chip_id; + int chip_rev; + struct bd9995x_init_data init_data; + struct bd9995x_state state; + + struct mutex lock; /* Protect state data */ +}; + +static const struct regmap_range bd9995x_readonly_reg_ranges[] = { + regmap_reg_range(CHGSTM_STATUS, SEL_ILIM_VAL), + regmap_reg_range(IOUT_DACIN_VAL, IOUT_DACIN_VAL), + regmap_reg_range(VCC_UCD_STATUS, VCC_IDD_STATUS), + regmap_reg_range(VBUS_UCD_STATUS, VBUS_IDD_STATUS), + regmap_reg_range(CHIP_ID, CHIP_REV), + regmap_reg_range(SYSTEM_STATUS, SYSTEM_STATUS), + regmap_reg_range(IBATP_VAL, VBAT_AVE_VAL), + regmap_reg_range(VTH_VAL, EXTIADP_AVE_VAL), +}; + +static const struct regmap_access_table bd9995x_writeable_regs = { + .no_ranges = bd9995x_readonly_reg_ranges, + .n_no_ranges = ARRAY_SIZE(bd9995x_readonly_reg_ranges), +}; + +static const struct regmap_range bd9995x_volatile_reg_ranges[] = { + regmap_reg_range(CHGSTM_STATUS, WDT_STATUS), + regmap_reg_range(VCC_UCD_STATUS, VCC_IDD_STATUS), + regmap_reg_range(VBUS_UCD_STATUS, VBUS_IDD_STATUS), + regmap_reg_range(INT0_STATUS, INT7_STATUS), + regmap_reg_range(SYSTEM_STATUS, SYSTEM_CTRL_SET), + regmap_reg_range(IBATP_VAL, EXTIADP_AVE_VAL), /* Measurement regs */ +}; + +static const struct regmap_access_table bd9995x_volatile_regs = { + .yes_ranges = bd9995x_volatile_reg_ranges, + .n_yes_ranges = ARRAY_SIZE(bd9995x_volatile_reg_ranges), +}; + +static const struct regmap_range_cfg regmap_range_cfg[] = { + { + .selector_reg = MAP_SET, + .selector_mask = 0xFFFF, + .selector_shift = 0, + .window_start = 0, + .window_len = 0x100, + .range_min = 0 * 0x100, + .range_max = 3 * 0x100, + }, +}; + +static const struct regmap_config bd9995x_regmap_config = { + .reg_bits = 8, + .val_bits = 16, + .reg_stride = 1, + + .max_register = 3 * 0x100, + .cache_type = REGCACHE_RBTREE, + + .ranges = regmap_range_cfg, + .num_ranges = ARRAY_SIZE(regmap_range_cfg), + .val_format_endian = REGMAP_ENDIAN_LITTLE, + .wr_table = &bd9995x_writeable_regs, + .volatile_table = &bd9995x_volatile_regs, +}; + +enum bd9995x_chrg_fault { + CHRG_FAULT_NORMAL, + CHRG_FAULT_INPUT, + CHRG_FAULT_THERMAL_SHUTDOWN, + CHRG_FAULT_TIMER_EXPIRED, +}; + +static int bd9995x_get_prop_batt_health(struct bd9995x_device *bd) +{ + int ret, tmp; + + ret = regmap_field_read(bd->rmap_fields[F_BATTEMP], &tmp); + if (ret) + return POWER_SUPPLY_HEALTH_UNKNOWN; + + /* TODO: Check these against datasheet page 34 */ + + switch (tmp) { + case ROOM: + return POWER_SUPPLY_HEALTH_GOOD; + case HOT1: + case HOT2: + case HOT3: + return POWER_SUPPLY_HEALTH_OVERHEAT; + case COLD1: + case COLD2: + return POWER_SUPPLY_HEALTH_COLD; + case TEMP_DIS: + case BATT_OPEN: + default: + return POWER_SUPPLY_HEALTH_UNKNOWN; + } +} + +static int bd9995x_get_prop_charge_type(struct bd9995x_device *bd) +{ + int ret, tmp; + + ret = regmap_field_read(bd->rmap_fields[F_CHGSTM_STATE], &tmp); + if (ret) + return POWER_SUPPLY_CHARGE_TYPE_UNKNOWN; + + switch (tmp) { + case CHGSTM_TRICKLE_CHARGE: + case CHGSTM_PRE_CHARGE: + return POWER_SUPPLY_CHARGE_TYPE_TRICKLE; + case CHGSTM_FAST_CHARGE: + return POWER_SUPPLY_CHARGE_TYPE_FAST; + case CHGSTM_TOP_OFF: + case CHGSTM_DONE: + case CHGSTM_SUSPEND: + return POWER_SUPPLY_CHARGE_TYPE_NONE; + default: /* Rest of the states are error related, no charging */ + return POWER_SUPPLY_CHARGE_TYPE_NONE; + } +} + +static bool bd9995x_get_prop_batt_present(struct bd9995x_device *bd) +{ + int ret, tmp; + + ret = regmap_field_read(bd->rmap_fields[F_BATTEMP], &tmp); + if (ret) + return false; + + return tmp != BATT_OPEN; +} + +static int bd9995x_get_prop_batt_voltage(struct bd9995x_device *bd) +{ + int ret, tmp; + + ret = regmap_field_read(bd->rmap_fields[F_VBAT_VAL], &tmp); + if (ret) + return 0; + + tmp = min(tmp, 19200); + + return tmp * 1000; +} + +static int bd9995x_get_prop_batt_current(struct bd9995x_device *bd) +{ + int ret, tmp; + + ret = regmap_field_read(bd->rmap_fields[F_IBATP_VAL], &tmp); + if (ret) + return 0; + + return tmp * 1000; +} + +#define DEFAULT_BATTERY_TEMPERATURE 250 + +static int bd9995x_get_prop_batt_temp(struct bd9995x_device *bd) +{ + int ret, tmp; + + ret = regmap_field_read(bd->rmap_fields[F_THERM_VAL], &tmp); + if (ret) + return DEFAULT_BATTERY_TEMPERATURE; + + return (200 - tmp) * 10; +} + +static int bd9995x_power_supply_get_property(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + int ret, tmp; + struct bd9995x_device *bd = power_supply_get_drvdata(psy); + struct bd9995x_state state; + + mutex_lock(&bd->lock); + state = bd->state; + mutex_unlock(&bd->lock); + + switch (psp) { + case POWER_SUPPLY_PROP_STATUS: + switch (state.chgstm_status) { + case CHGSTM_TRICKLE_CHARGE: + case CHGSTM_PRE_CHARGE: + case CHGSTM_FAST_CHARGE: + case CHGSTM_TOP_OFF: + val->intval = POWER_SUPPLY_STATUS_CHARGING; + break; + + case CHGSTM_DONE: + val->intval = POWER_SUPPLY_STATUS_FULL; + break; + + case CHGSTM_SUSPEND: + case CHGSTM_TEMPERATURE_ERROR_1: + case CHGSTM_TEMPERATURE_ERROR_2: + case CHGSTM_TEMPERATURE_ERROR_3: + case CHGSTM_TEMPERATURE_ERROR_4: + case CHGSTM_TEMPERATURE_ERROR_5: + case CHGSTM_TEMPERATURE_ERROR_6: + case CHGSTM_TEMPERATURE_ERROR_7: + case CHGSTM_THERMAL_SHUT_DOWN_1: + case CHGSTM_THERMAL_SHUT_DOWN_2: + case CHGSTM_THERMAL_SHUT_DOWN_3: + case CHGSTM_THERMAL_SHUT_DOWN_4: + case CHGSTM_THERMAL_SHUT_DOWN_5: + case CHGSTM_THERMAL_SHUT_DOWN_6: + case CHGSTM_THERMAL_SHUT_DOWN_7: + case CHGSTM_BATTERY_ERROR: + val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING; + break; + + default: + val->intval = POWER_SUPPLY_STATUS_UNKNOWN; + break; + } + break; + + case POWER_SUPPLY_PROP_MANUFACTURER: + val->strval = BD9995X_MANUFACTURER; + break; + + case POWER_SUPPLY_PROP_ONLINE: + val->intval = state.online; + break; + + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT: + ret = regmap_field_read(bd->rmap_fields[F_IBATP_VAL], &tmp); + if (ret) + return ret; + val->intval = tmp * 1000; + break; + + case POWER_SUPPLY_PROP_CHARGE_AVG: + ret = regmap_field_read(bd->rmap_fields[F_IBATP_AVE_VAL], &tmp); + if (ret) + return ret; + val->intval = tmp * 1000; + break; + + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX: + /* + * Currently the DT uses this property to give the + * target current for fast-charging constant current phase. + * I think it is correct in a sense. + * + * Yet, this prop we read and return here is the programmed + * safety limit for combined input currents. This feels + * also correct in a sense. + * + * However, this results a mismatch to DT value and value + * read from sysfs. + */ + ret = regmap_field_read(bd->rmap_fields[F_SEL_ILIM_VAL], &tmp); + if (ret) + return ret; + val->intval = tmp * 1000; + break; + + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE: + if (!state.online) { + val->intval = 0; + break; + } + + ret = regmap_field_read(bd->rmap_fields[F_VFASTCHG_REG_SET1], + &tmp); + if (ret) + return ret; + + /* + * The actual range : 2560 to 19200 mV. No matter what the + * register says + */ + val->intval = clamp_val(tmp << 4, 2560, 19200); + val->intval *= 1000; + break; + + case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT: + ret = regmap_field_read(bd->rmap_fields[F_ITERM_SET], &tmp); + if (ret) + return ret; + /* Start step is 64 mA */ + val->intval = tmp << 6; + /* Maximum is 1024 mA - no matter what register says */ + val->intval = min(val->intval, 1024); + val->intval *= 1000; + break; + + /* Battery properties which we access through charger */ + case POWER_SUPPLY_PROP_PRESENT: + val->intval = bd9995x_get_prop_batt_present(bd); + break; + + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + val->intval = bd9995x_get_prop_batt_voltage(bd); + break; + + case POWER_SUPPLY_PROP_CURRENT_NOW: + val->intval = bd9995x_get_prop_batt_current(bd); + break; + + case POWER_SUPPLY_PROP_CHARGE_TYPE: + val->intval = bd9995x_get_prop_charge_type(bd); + break; + + case POWER_SUPPLY_PROP_HEALTH: + val->intval = bd9995x_get_prop_batt_health(bd); + break; + + case POWER_SUPPLY_PROP_TEMP: + val->intval = bd9995x_get_prop_batt_temp(bd); + break; + + case POWER_SUPPLY_PROP_TECHNOLOGY: + val->intval = POWER_SUPPLY_TECHNOLOGY_LION; + break; + + case POWER_SUPPLY_PROP_MODEL_NAME: + val->strval = "bd99954"; + break; + + default: + return -EINVAL; + + } + + return 0; +} + +static int bd9995x_get_chip_state(struct bd9995x_device *bd, + struct bd9995x_state *state) +{ + int i, ret, tmp; + struct { + struct regmap_field *id; + u16 *data; + } state_fields[] = { + { + bd->rmap_fields[F_CHGSTM_STATE], &state->chgstm_status, + }, { + bd->rmap_fields[F_VBAT_VSYS_STATUS], + &state->vbat_vsys_status, + }, { + bd->rmap_fields[F_VBUS_VCC_STATUS], + &state->vbus_vcc_status, + }, + }; + + + for (i = 0; i < ARRAY_SIZE(state_fields); i++) { + ret = regmap_field_read(state_fields[i].id, &tmp); + if (ret) + return ret; + + *state_fields[i].data = tmp; + } + + if (state->vbus_vcc_status & STATUS_VCC_DET || + state->vbus_vcc_status & STATUS_VBUS_DET) + state->online = 1; + else + state->online = 0; + + return 0; +} + +static irqreturn_t bd9995x_irq_handler_thread(int irq, void *private) +{ + struct bd9995x_device *bd = private; + int ret, status, mask, i; + unsigned long tmp; + struct bd9995x_state state; + + /* + * The bd9995x does not seem to generate big amount of interrupts. + * The logic regarding which interrupts can cause relevant + * status changes seem to be pretty complex. + * + * So lets implement really simple and hopefully bullet-proof handler: + * It does not really matter which IRQ we handle, we just go and + * re-read all interesting statuses + give the framework a nudge. + * + * Other option would be building a _complex_ and error prone logic + * trying to decide what could have been changed (resulting this IRQ + * we are now handling). During the normal operation the BD99954 does + * not seem to be generating much of interrupts so benefit from such + * logic would probably be minimal. + */ + + ret = regmap_read(bd->rmap, INT0_STATUS, &status); + if (ret) { + dev_err(bd->dev, "Failed to read IRQ status\n"); + return IRQ_NONE; + } + + ret = regmap_field_read(bd->rmap_fields[F_INT0_SET], &mask); + if (ret) { + dev_err(bd->dev, "Failed to read IRQ mask\n"); + return IRQ_NONE; + } + + /* Handle only IRQs that are not masked */ + status &= mask; + tmp = status; + + /* Lowest bit does not represent any sub-registers */ + tmp >>= 1; + + /* + * Mask and ack IRQs we will handle (+ the idiot bit) + */ + ret = regmap_field_write(bd->rmap_fields[F_INT0_SET], 0); + if (ret) { + dev_err(bd->dev, "Failed to mask F_INT0\n"); + return IRQ_NONE; + } + + ret = regmap_write(bd->rmap, INT0_STATUS, status); + if (ret) { + dev_err(bd->dev, "Failed to ack F_INT0\n"); + goto err_umask; + } + + for_each_set_bit(i, &tmp, 7) { + int sub_status, sub_mask; + int sub_status_reg[] = { + INT1_STATUS, INT2_STATUS, INT3_STATUS, INT4_STATUS, + INT5_STATUS, INT6_STATUS, INT7_STATUS, + }; + struct regmap_field *sub_mask_f[] = { + bd->rmap_fields[F_INT1_SET], + bd->rmap_fields[F_INT2_SET], + bd->rmap_fields[F_INT3_SET], + bd->rmap_fields[F_INT4_SET], + bd->rmap_fields[F_INT5_SET], + bd->rmap_fields[F_INT6_SET], + bd->rmap_fields[F_INT7_SET], + }; + + /* Clear sub IRQs */ + ret = regmap_read(bd->rmap, sub_status_reg[i], &sub_status); + if (ret) { + dev_err(bd->dev, "Failed to read IRQ sub-status\n"); + goto err_umask; + } + + ret = regmap_field_read(sub_mask_f[i], &sub_mask); + if (ret) { + dev_err(bd->dev, "Failed to read IRQ sub-mask\n"); + goto err_umask; + } + + /* Ack active sub-statuses */ + sub_status &= sub_mask; + + ret = regmap_write(bd->rmap, sub_status_reg[i], sub_status); + if (ret) { + dev_err(bd->dev, "Failed to ack sub-IRQ\n"); + goto err_umask; + } + } + + ret = regmap_field_write(bd->rmap_fields[F_INT0_SET], mask); + if (ret) + /* May as well retry once */ + goto err_umask; + + /* Read whole chip state */ + ret = bd9995x_get_chip_state(bd, &state); + if (ret < 0) { + dev_err(bd->dev, "Failed to read chip state\n"); + } else { + mutex_lock(&bd->lock); + bd->state = state; + mutex_unlock(&bd->lock); + + power_supply_changed(bd->charger); + } + + return IRQ_HANDLED; + +err_umask: + ret = regmap_field_write(bd->rmap_fields[F_INT0_SET], mask); + if (ret) + dev_err(bd->dev, + "Failed to un-mask F_INT0 - IRQ permanently disabled\n"); + + return IRQ_NONE; +} + +static int __bd9995x_chip_reset(struct bd9995x_device *bd) +{ + int ret, state; + int rst_check_counter = 10; + u16 tmp = ALLRST | OTPLD; + + ret = regmap_raw_write(bd->rmap, SYSTEM_CTRL_SET, &tmp, 2); + if (ret < 0) + return ret; + + do { + ret = regmap_field_read(bd->rmap_fields[F_OTPLD_STATE], &state); + if (ret) + return ret; + + msleep(10); + } while (state == 0 && --rst_check_counter); + + if (!rst_check_counter) { + dev_err(bd->dev, "chip reset not completed\n"); + return -ETIMEDOUT; + } + + tmp = 0; + ret = regmap_raw_write(bd->rmap, SYSTEM_CTRL_SET, &tmp, 2); + + return ret; +} + +static int bd9995x_hw_init(struct bd9995x_device *bd) +{ + int ret; + int i; + struct bd9995x_state state; + struct bd9995x_init_data *id = &bd->init_data; + + const struct { + enum bd9995x_fields id; + u16 value; + } init_data[] = { + /* Enable the charging trigger after SDP charger attached */ + {F_SDP_CHG_TRIG_EN, 1}, + /* Enable charging trigger after SDP charger attached */ + {F_SDP_CHG_TRIG, 1}, + /* Disable charging trigger by BC1.2 detection */ + {F_VBUS_BC_DISEN, 1}, + /* Disable charging trigger by BC1.2 detection */ + {F_VCC_BC_DISEN, 1}, + /* Disable automatic limitation of the input current */ + {F_ILIM_AUTO_DISEN, 1}, + /* Select current limitation when SDP charger attached*/ + {F_SDP_500_SEL, 1}, + /* Select current limitation when DCP charger attached */ + {F_DCP_2500_SEL, 1}, + {F_VSYSREG_SET, id->vsysreg_set}, + /* Activate USB charging and DC/DC converter */ + {F_USB_SUS, 0}, + /* DCDC clock: 1200 kHz*/ + {F_DCDC_CLK_SEL, 3}, + /* Enable charging */ + {F_CHG_EN, 1}, + /* Disable Input current Limit setting voltage measurement */ + {F_EXTIADPEN, 0}, + /* Disable input current limiting */ + {F_VSYS_PRIORITY, 1}, + {F_IBUS_LIM_SET, id->ibus_lim_set}, + {F_ICC_LIM_SET, id->icc_lim_set}, + /* Charge Termination Current Setting to 0*/ + {F_ITERM_SET, id->iterm_set}, + /* Trickle-charge Current Setting */ + {F_ITRICH_SET, id->itrich_set}, + /* Pre-charge Current setting */ + {F_IPRECH_SET, id->iprech_set}, + /* Fast Charge Current for constant current phase */ + {F_ICHG_SET, id->ichg_set}, + /* Fast Charge Voltage Regulation Setting */ + {F_VFASTCHG_REG_SET1, id->vfastchg_reg_set1}, + /* Set Pre-charge Voltage Threshold for trickle charging. */ + {F_VPRECHG_TH_SET, id->vprechg_th_set}, + {F_VRECHG_SET, id->vrechg_set}, + {F_VBATOVP_SET, id->vbatovp_set}, + /* Reverse buck boost voltage Setting */ + {F_VRBOOST_SET, 0}, + /* Disable fast-charging watchdog */ + {F_WDT_FST, 0}, + /* Disable pre-charging watchdog */ + {F_WDT_PRE, 0}, + /* Power save off */ + {F_POWER_SAVE_MODE, 0}, + {F_INT1_SET, INT1_ALL}, + {F_INT2_SET, INT2_ALL}, + {F_INT3_SET, INT3_ALL}, + {F_INT4_SET, INT4_ALL}, + {F_INT5_SET, INT5_ALL}, + {F_INT6_SET, INT6_ALL}, + {F_INT7_SET, INT7_ALL}, + }; + + /* + * Currently we initialize charger to a known state at startup. + * If we want to allow for example the boot code to initialize + * charger we should get rid of this. + */ + ret = __bd9995x_chip_reset(bd); + if (ret < 0) + return ret; + + /* Initialize currents/voltages and other parameters */ + for (i = 0; i < ARRAY_SIZE(init_data); i++) { + ret = regmap_field_write(bd->rmap_fields[init_data[i].id], + init_data[i].value); + if (ret) { + dev_err(bd->dev, "failed to initialize charger (%d)\n", + ret); + return ret; + } + } + + ret = bd9995x_get_chip_state(bd, &state); + if (ret < 0) + return ret; + + mutex_lock(&bd->lock); + bd->state = state; + mutex_unlock(&bd->lock); + + return 0; +} + +static enum power_supply_property bd9995x_power_supply_props[] = { + POWER_SUPPLY_PROP_MANUFACTURER, + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_ONLINE, + POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT, + POWER_SUPPLY_PROP_CHARGE_AVG, + POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX, + POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE, + POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT, + /* Battery props we access through charger */ + POWER_SUPPLY_PROP_PRESENT, + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_CURRENT_NOW, + POWER_SUPPLY_PROP_CHARGE_TYPE, + POWER_SUPPLY_PROP_HEALTH, + POWER_SUPPLY_PROP_TEMP, + POWER_SUPPLY_PROP_TECHNOLOGY, + POWER_SUPPLY_PROP_MODEL_NAME, +}; + +static const struct power_supply_desc bd9995x_power_supply_desc = { + .name = "bd9995x-charger", + .type = POWER_SUPPLY_TYPE_USB, + .properties = bd9995x_power_supply_props, + .num_properties = ARRAY_SIZE(bd9995x_power_supply_props), + .get_property = bd9995x_power_supply_get_property, +}; + +/* + * Limit configurations for vbus-input-current and vcc-vacp-input-current + * Minimum limit is 0 uA. Max is 511 * 32000 uA = 16352000 uA. This is + * configured by writing a register so that each increment in register + * value equals to 32000 uA limit increment. + * + * Eg, value 0x0 is limit 0, value 0x1 is limit 32000, ... + * Describe the setting in linear_range table. + */ +static const struct linear_range input_current_limit_ranges[] = { + { + .min = 0, + .step = 32000, + .min_sel = 0x0, + .max_sel = 0x1ff, + }, +}; + +/* Possible trickle, pre-charging and termination current values */ +static const struct linear_range charging_current_ranges[] = { + { + .min = 0, + .step = 64000, + .min_sel = 0x0, + .max_sel = 0x10, + }, { + .min = 1024000, + .step = 0, + .min_sel = 0x11, + .max_sel = 0x1f, + }, +}; + +/* + * Fast charging voltage regulation, starting re-charging limit + * and battery over voltage protection have same possible values + */ +static const struct linear_range charge_voltage_regulation_ranges[] = { + { + .min = 2560000, + .step = 0, + .min_sel = 0, + .max_sel = 0xA0, + }, { + .min = 2560000, + .step = 16000, + .min_sel = 0xA0, + .max_sel = 0x4B0, + }, { + .min = 19200000, + .step = 0, + .min_sel = 0x4B0, + .max_sel = 0x7FF, + }, +}; + +/* Possible VSYS voltage regulation values */ +static const struct linear_range vsys_voltage_regulation_ranges[] = { + { + .min = 2560000, + .step = 0, + .min_sel = 0, + .max_sel = 0x28, + }, { + .min = 2560000, + .step = 64000, + .min_sel = 0x28, + .max_sel = 0x12C, + }, { + .min = 19200000, + .step = 0, + .min_sel = 0x12C, + .max_sel = 0x1FF, + }, +}; + +/* Possible settings for switching from trickle to pre-charging limits */ +static const struct linear_range trickle_to_pre_threshold_ranges[] = { + { + .min = 2048000, + .step = 0, + .min_sel = 0, + .max_sel = 0x20, + }, { + .min = 2048000, + .step = 64000, + .min_sel = 0x20, + .max_sel = 0x12C, + }, { + .min = 19200000, + .step = 0, + .min_sel = 0x12C, + .max_sel = 0x1FF + } +}; + +/* Possible current values for fast-charging constant current phase */ +static const struct linear_range fast_charge_current_ranges[] = { + { + .min = 0, + .step = 64000, + .min_sel = 0, + .max_sel = 0xFF, + } +}; + +struct battery_init { + const char *name; + int *info_data; + const struct linear_range *range; + int ranges; + u16 *data; +}; + +struct dt_init { + char *prop; + const struct linear_range *range; + int ranges; + u16 *data; +}; + +static int bd9995x_fw_probe(struct bd9995x_device *bd) +{ + int ret; + struct power_supply_battery_info info; + u32 property; + int i; + int regval; + bool found; + struct bd9995x_init_data *init = &bd->init_data; + struct battery_init battery_inits[] = { + { + .name = "trickle-charging current", + .info_data = &info.tricklecharge_current_ua, + .range = &charging_current_ranges[0], + .ranges = 2, + .data = &init->itrich_set, + }, { + .name = "pre-charging current", + .info_data = &info.precharge_current_ua, + .range = &charging_current_ranges[0], + .ranges = 2, + .data = &init->iprech_set, + }, { + .name = "pre-to-trickle charge voltage threshold", + .info_data = &info.precharge_voltage_max_uv, + .range = &trickle_to_pre_threshold_ranges[0], + .ranges = 2, + .data = &init->vprechg_th_set, + }, { + .name = "charging termination current", + .info_data = &info.charge_term_current_ua, + .range = &charging_current_ranges[0], + .ranges = 2, + .data = &init->iterm_set, + }, { + .name = "charging re-start voltage", + .info_data = &info.charge_restart_voltage_uv, + .range = &charge_voltage_regulation_ranges[0], + .ranges = 2, + .data = &init->vrechg_set, + }, { + .name = "battery overvoltage limit", + .info_data = &info.overvoltage_limit_uv, + .range = &charge_voltage_regulation_ranges[0], + .ranges = 2, + .data = &init->vbatovp_set, + }, { + .name = "fast-charging max current", + .info_data = &info.constant_charge_current_max_ua, + .range = &fast_charge_current_ranges[0], + .ranges = 1, + .data = &init->ichg_set, + }, { + .name = "fast-charging voltage", + .info_data = &info.constant_charge_voltage_max_uv, + .range = &charge_voltage_regulation_ranges[0], + .ranges = 2, + .data = &init->vfastchg_reg_set1, + }, + }; + struct dt_init props[] = { + { + .prop = "rohm,vsys-regulation-microvolt", + .range = &vsys_voltage_regulation_ranges[0], + .ranges = 2, + .data = &init->vsysreg_set, + }, { + .prop = "rohm,vbus-input-current-limit-microamp", + .range = &input_current_limit_ranges[0], + .ranges = 1, + .data = &init->ibus_lim_set, + }, { + .prop = "rohm,vcc-input-current-limit-microamp", + .range = &input_current_limit_ranges[0], + .ranges = 1, + .data = &init->icc_lim_set, + }, + }; + + /* + * The power_supply_get_battery_info() does not support getting values + * from ACPI. Let's fix it if ACPI is required here. + */ + ret = power_supply_get_battery_info(bd->charger, &info); + if (ret < 0) + return ret; + + for (i = 0; i < ARRAY_SIZE(battery_inits); i++) { + int val = *battery_inits[i].info_data; + const struct linear_range *range = battery_inits[i].range; + int ranges = battery_inits[i].ranges; + + if (val == -EINVAL) + continue; + + ret = linear_range_get_selector_low_array(range, ranges, val, + ®val, &found); + if (ret) { + dev_err(bd->dev, "Unsupported value for %s\n", + battery_inits[i].name); + + power_supply_put_battery_info(bd->charger, &info); + return -EINVAL; + } + if (!found) { + dev_warn(bd->dev, + "Unsupported value for %s - using smaller\n", + battery_inits[i].name); + } + *(battery_inits[i].data) = regval; + } + + power_supply_put_battery_info(bd->charger, &info); + + for (i = 0; i < ARRAY_SIZE(props); i++) { + ret = device_property_read_u32(bd->dev, props[i].prop, + &property); + if (ret < 0) { + dev_err(bd->dev, "failed to read %s", props[i].prop); + + return ret; + } + + ret = linear_range_get_selector_low_array(props[i].range, + props[i].ranges, + property, ®val, + &found); + if (ret) { + dev_err(bd->dev, "Unsupported value for '%s'\n", + props[i].prop); + + return -EINVAL; + } + + if (!found) { + dev_warn(bd->dev, + "Unsupported value for '%s' - using smaller\n", + props[i].prop); + } + + *(props[i].data) = regval; + } + + return 0; +} + +static void bd9995x_chip_reset(void *bd) +{ + __bd9995x_chip_reset(bd); +} + +static int bd9995x_probe(struct i2c_client *client) +{ + struct device *dev = &client->dev; + struct bd9995x_device *bd; + struct power_supply_config psy_cfg = {}; + int ret; + int i; + + bd = devm_kzalloc(dev, sizeof(*bd), GFP_KERNEL); + if (!bd) + return -ENOMEM; + + bd->client = client; + bd->dev = dev; + psy_cfg.drv_data = bd; + psy_cfg.of_node = dev->of_node; + + mutex_init(&bd->lock); + + bd->rmap = devm_regmap_init_i2c(client, &bd9995x_regmap_config); + if (IS_ERR(bd->rmap)) { + dev_err(dev, "Failed to setup register access via i2c\n"); + return PTR_ERR(bd->rmap); + } + + for (i = 0; i < ARRAY_SIZE(bd9995x_reg_fields); i++) { + const struct reg_field *reg_fields = bd9995x_reg_fields; + + bd->rmap_fields[i] = devm_regmap_field_alloc(dev, bd->rmap, + reg_fields[i]); + if (IS_ERR(bd->rmap_fields[i])) { + dev_err(dev, "cannot allocate regmap field\n"); + return PTR_ERR(bd->rmap_fields[i]); + } + } + + i2c_set_clientdata(client, bd); + + ret = regmap_field_read(bd->rmap_fields[F_CHIP_ID], &bd->chip_id); + if (ret) { + dev_err(dev, "Cannot read chip ID.\n"); + return ret; + } + + if (bd->chip_id != BD99954_ID) { + dev_err(dev, "Chip with ID=0x%x, not supported!\n", + bd->chip_id); + return -ENODEV; + } + + ret = regmap_field_read(bd->rmap_fields[F_CHIP_REV], &bd->chip_rev); + if (ret) { + dev_err(dev, "Cannot read revision.\n"); + return ret; + } + + dev_info(bd->dev, "Found BD99954 chip rev %d\n", bd->chip_rev); + + /* + * We need to init the psy before we can call + * power_supply_get_battery_info() for it + */ + bd->charger = devm_power_supply_register(bd->dev, + &bd9995x_power_supply_desc, + &psy_cfg); + if (IS_ERR(bd->charger)) { + dev_err(dev, "Failed to register power supply\n"); + return PTR_ERR(bd->charger); + } + + ret = bd9995x_fw_probe(bd); + if (ret < 0) { + dev_err(dev, "Cannot read device properties.\n"); + return ret; + } + + ret = bd9995x_hw_init(bd); + if (ret < 0) { + dev_err(dev, "Cannot initialize the chip.\n"); + return ret; + } + + ret = devm_add_action_or_reset(dev, bd9995x_chip_reset, bd); + if (ret) + return ret; + + return devm_request_threaded_irq(dev, client->irq, NULL, + bd9995x_irq_handler_thread, + IRQF_TRIGGER_LOW | IRQF_ONESHOT, + BD9995X_IRQ_PIN, bd); +} + +static const struct of_device_id bd9995x_of_match[] = { + { .compatible = "rohm,bd99954", }, + { } +}; +MODULE_DEVICE_TABLE(of, bd9995x_of_match); + +static struct i2c_driver bd9995x_driver = { + .driver = { + .name = "bd9995x-charger", + .of_match_table = bd9995x_of_match, + }, + .probe_new = bd9995x_probe, +}; +module_i2c_driver(bd9995x_driver); + +MODULE_AUTHOR("Laine Markus <markus.laine@fi.rohmeurope.com>"); +MODULE_DESCRIPTION("ROHM BD99954 charger driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/power/supply/bd99954-charger.h b/drivers/power/supply/bd99954-charger.h new file mode 100644 index 000000000000..f58897925383 --- /dev/null +++ b/drivers/power/supply/bd99954-charger.h @@ -0,0 +1,1075 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* Copyright (C) 2020 ROHM Semiconductors */ +#ifndef BD99954_CHARGER_H +#define BD99954_CHARGER_H + +#include <linux/regmap.h> + +#define BD9995X_MANUFACTURER "Rohm Semiconductor" +#define BD9995X_IRQ_PIN "bd9995x_irq" + +#define BD9995X_VSYS_PRECHARGE_OFFSET_MV 200 + +#define BD99954_ID 0x346 +#define BD99955_ID 0x221 +#define BD99956_ID 0x331 + +/* Battery Charger Commands */ +#define CHARGING_CURRENT 0x14 +#define CHARGING_VOLTAGE 0x15 +#define PROTECT_SET 0x3E +#define MAP_SET 0x3F + +/* Extended commands */ +#define CHGSTM_STATUS 0x100 +#define VBAT_VSYS_STATUS 0x101 +#define VBUS_VCC_STATUS 0x102 +#define CHGOP_STATUS 0x103 +#define WDT_STATUS 0x104 +#define CUR_ILIM_VAL 0x105 +#define SEL_ILIM_VAL 0x106 +#define IBUS_LIM_SET 0x107 +#define ICC_LIM_SET 0x108 +#define IOTG_LIM_SET 0x109 +#define VIN_CTRL_SET 0x10A +#define CHGOP_SET1 0x10B +#define CHGOP_SET2 0x10C +#define VBUSCLPS_TH_SET 0x10D +#define VCCCLPS_TH_SET 0x10E +#define CHGWDT_SET 0x10F +#define BATTWDT_SET 0x110 +#define VSYSREG_SET 0x111 +#define VSYSVAL_THH_SET 0x112 +#define VSYSVAL_THL_SET 0x113 +#define ITRICH_SET 0x114 +#define IPRECH_SET 0x115 +#define ICHG_SET 0x116 +#define ITERM_SET 0x117 +#define VPRECHG_TH_SET 0x118 +#define VRBOOST_SET 0x119 +#define VFASTCHG_REG_SET1 0x11A +#define VFASTCHG_REG_SET2 0x11B +#define VFASTCHG_REG_SET3 0x11C +#define VRECHG_SET 0x11D +#define VBATOVP_SET 0x11E +#define IBATSHORT_SET 0x11F +#define PROCHOT_CTRL_SET 0x120 +#define PROCHOT_ICRIT_SET 0x121 +#define PROCHOT_INORM_SET 0x122 +#define PROCHOT_IDCHG_SET 0x123 +#define PROCHOT_VSYS_SET 0x124 +#define PMON_IOUT_CTRL_SET 0x125 +#define PMON_DACIN_VAL 0x126 +#define IOUT_DACIN_VAL 0x127 +#define VCC_UCD_SET 0x128 +#define VCC_UCD_STATUS 0x129 +#define VCC_IDD_STATUS 0x12A +#define VCC_UCD_FCTRL_SET 0x12B +#define VCC_UCD_FCTRL_EN 0x12C +#define VBUS_UCD_SET 0x130 +#define VBUS_UCD_STATUS 0x131 +#define VBUS_IDD_STATUS 0x132 +#define VBUS_UCD_FCTRL_SET 0x133 +#define VBUS_UCD_FCTRL_EN 0x134 +#define CHIP_ID 0x138 +#define CHIP_REV 0x139 +#define IC_SET1 0x13A +#define IC_SET2 0x13B +#define SYSTEM_STATUS 0x13C +#define SYSTEM_CTRL_SET 0x13D +#define VM_CTRL_SET 0x140 +#define THERM_WINDOW_SET1 0x141 +#define THERM_WINDOW_SET2 0x142 +#define THERM_WINDOW_SET3 0x143 +#define THERM_WINDOW_SET4 0x144 +#define THERM_WINDOW_SET5 0x145 +#define IBATP_TH_SET 0x146 +#define IBATM_TH_SET 0x147 +#define VBAT_TH_SET 0x148 +#define THERM_TH_SET 0x149 +#define IACP_TH_SET 0x14A +#define VACP_TH_SET 0x14B +#define VBUS_TH_SET 0x14C +#define VCC_TH_SET 0x14D +#define VSYS_TH_SET 0x14E +#define EXTIADP_TH_SET 0x14F +#define IBATP_VAL 0x150 +#define IBATP_AVE_VAL 0x151 +#define IBATM_VAL 0x152 +#define IBATM_AVE_VAL 0x153 +#define VBAT_VAL 0x154 +#define VBAT_AVE_VAL 0x155 +#define THERM_VAL 0x156 +#define VTH_VAL 0x157 +#define IACP_VAL 0x158 +#define IACP_AVE_VAL 0x159 +#define VACP_VAL 0x15A +#define VACP_AVE_VAL 0x15B +#define VBUS_VAL 0x15C +#define VBUS_AVE_VAL 0x15D +#define VCC_VAL 0x15E +#define VCC_AVE_VAL 0x15F +#define VSYS_VAL 0x160 +#define VSYS_AVE_VAL 0x161 +#define EXTIADP_VAL 0x162 +#define EXTIADP_AVE_VAL 0x163 +#define VACPCLPS_TH_SET 0x164 +#define INT0_SET 0x168 +#define INT1_SET 0x169 +#define INT2_SET 0x16A +#define INT3_SET 0x16B +#define INT4_SET 0x16C +#define INT5_SET 0x16D +#define INT6_SET 0x16E +#define INT7_SET 0x16F +#define INT0_STATUS 0x170 +#define INT1_STATUS 0x171 +#define INT2_STATUS 0x172 +#define INT3_STATUS 0x173 +#define INT4_STATUS 0x174 +#define INT5_STATUS 0x175 +#define INT6_STATUS 0x176 +#define INT7_STATUS 0x177 +#define OTPREG0 0x17A +#define OTPREG1 0x17B +#define SMBREG 0x17C +#define DEBUG_MODE_SET 0x17F +#define DEBUG0x14 0x214 +#define DEBUG0x1A 0x21A + +enum bd9995x_fields { + F_PREV_CHGSTM_STATE, F_CHGSTM_STATE, + F_VBAT_VSYS_STATUS, + F_VBUS_VCC_STATUS, + F_BATTEMP, F_VRECHG_DET, F_RBOOST_UV, F_RBOOSTS, + F_THERMWDT_VAL, F_CHGWDT_VAL, + F_CUR_ILIM_VAL, + F_SEL_ILIM_VAL, + F_IBUS_LIM_SET, + F_ICC_LIM_SET, + F_IOTG_LIM_SET, + F_OTG_BOTH_EN, + F_VRBOOST_TRIG, + F_VRBOOST_EN, + F_PP_BOTH_THRU, + F_VIN_ORD, + F_VBUS_EN, + F_VCC_EN, + F_VSYS_PRIORITY, + F_PPC_SUB_CAP, + F_PPC_CAP, + F_DCP_2500_SEL, + F_SDP_500_SEL, + F_ILIM_AUTO_DISEN, + F_VCC_BC_DISEN, + F_VBUS_BC_DISEN, + F_SDP_CHG_TRIG_EN, + F_SDP_CHG_TRIG, + F_AUTO_TOF, + F_AUTO_FST, + F_AUTO_RECH, + F_ILIM_RESET_EN, + F_DCDC_1MS_SEL, + F_SEL_ILIM_DIV, + F_BATT_LEARN, + F_CHG_EN, + F_USB_SUS, + F_CHOP_SS_INIT, + F_CHOP_ALL_INIT, + F_DCDC_CLK_SEL, + F_CHOP_SS, + F_CHOP_ALL, + F_VBUSCLPS_TH_SET, + F_VCCCLPS_TH_SET, + F_WDT_FST, + F_WDT_PRE, + F_WDT_IBAT_SHORT, + F_WDT_THERM, + F_VSYSREG_SET, + F_VSYSVAL_THH_SET, + F_VSYSVAL_THL_SET, + F_ITRICH_SET, + F_IPRECH_SET, + F_ICHG_SET, + F_ITERM_SET, + F_VPRECHG_TH_SET, + F_VRBOOST_SET, + F_VFASTCHG_REG_SET1, + F_VFASTCHG_REG_SET2, + F_VFASTCHG_REG_SET3, + F_VRECHG_SET, + F_VBATOVP_SET, + F_IBATM_SHORT_SET, + F_PROCHOT_DG_SET, + F_PROCHOT_ICRIT_DG_SET, + F_PROCHOT_IDCHG_DG_SET, + F_PROCHOT_EN, + F_PROCHOT_ICRIT_SET, + F_PROCHOT_INORM_SET, + F_PROCHOT_IDCHG_SET, + F_PROCHOT_VSYS_SET, + F_IMON_INSEL, + F_PMON_INSEL, + F_IOUT_OUT_EN, + F_IOUT_SOURCE_SEL, + F_IOUT_GAIN_SET, + F_PMON_OUT_EN, + F_PMON_GAIN_SET, + F_PMON_DACIN_VAL, + F_IOUT_DACIN_VAL, + F_VCC_BCSRETRY, + F_VCC_ADCRTRY, + F_VCC_USBDETEN, + F_VCC_IDRDETEN, + F_VCC_ENUMRDY, + F_VCC_ADCPOLEN, + F_VCC_DCDMODE, + F_VCC_USB_SW_EN, + F_VCC_USB_SW, + F_VCC_DCDFAIL, + F_VCC_CHGPORT, + F_VCC_PUPDET, + F_VCC_VBUS_VLD, + F_VCC_CHGDET, + F_VCC_OTGDET, + F_VCC_VBINOP, + F_VCC_EXTID, + F_VCC_IDRDET, + F_VCC_INDO, + F_VCC_UCDSWEN, + F_VCC_RREF_EN, + F_VCC_DPPU_EN, + F_VCC_DPREF_EN, + F_VCC_DMREF_EN, + F_VCC_DPDET_EN, + F_VCC_DMDET_EN, + F_VCC_DPSINK_EN, + F_VCC_DMSINK_EN, + F_VCC_DP_BUFF_EN, + F_VCC_DM_BUFF_EN, + F_VCC_EXTCLKENBL, + F_VCC_PLSTESTEN, + F_VCC_UCDSWEN_TSTENB, + F_VCC_RREF_EN_TSTENB, + F_VCC_DPPU_EN_TSTENB, + F_VCC_DPREF_EN_TSTENB, + F_VCC_DMREF_EN_TSTENB, + F_VCC_DPDET_EN_TSTENB, + F_VCC_DMDET_EN_TSTENB, + F_VCC_DPSINK_EN_TSTENB, + F_VCC_DMSINK_EN_TSTENB, + F_VCC_DP_BUFF_EN_TSTENB, + F_VCC_DM_BUFF_EN_TSTENB, + F_VBUS_BCSRETRY, + F_VBUS_ADCRTRY, + F_VBUS_USBDETEN, + F_VBUS_IDRDETEN, + F_VBUS_ENUMRDY, + F_VBUS_ADCPOLEN, + F_VBUS_DCDMODE, + F_VBUS_USB_SW_EN, + F_VBUS_USB_SW, + F_VBUS_DCDFAIL, + F_VBUS_CHGPORT, + F_VBUS_PUPDET, + F_VBUS_VBUS_VLD, + F_VBUS_CHGDET, + F_VBUS_OTGDET, + F_VBUS_VBINOP, + F_VBUS_EXTID, + F_VBUS_IDRDET, + F_VBUS_INDO, + F_VBUS_UCDSWEN, + F_VBUS_RREF_EN, + F_VBUS_DPPU_EN, + F_VBUS_DPREF_EN, + F_VBUS_DMREF_EN, + F_VBUS_DPDET_EN, + F_VBUS_DMDET_EN, + F_VBUS_DPSINK_EN, + F_VBUS_DMSINK_EN, + F_VBUS_DP_BUFF_EN, + F_VBUS_DM_BUFF_EN, + F_VBUS_EXTCLKENBL, + F_VBUS_PLSTESTEN, + F_VBUS_UCDSWEN_TSTENB, + F_VBUS_RREF_EN_TSTENB, + F_VBUS_DPPU_EN_TSTENB, + F_VBUS_DPREF_EN_TSTENB, + F_VBUS_DMREF_EN_TSTENB, + F_VBUS_DPDET_EN_TSTENB, + F_VBUS_DMDET_EN_TSTENB, + F_VBUS_DPSINK_EN_TSTENB, + F_VBUS_DMSINK_EN_TSTENB, + F_VBUS_DP_BUFF_EN_TSTENB, + F_VBUS_DM_BUFF_EN_TSTENB, + F_CHIP_ID, + F_CHIP_REV, + F_ONE_CELL_MODE, + F_cell, + F_VACP_AUTO_DISCHG, + F_VACP_LOAD, + F_ACOK_POL, + F_ACOK_DISEN, + F_DEBUG_SET1, + F_DEBUG_SET0, + F_MONRST_STATE, + F_ALMRST_STATE, + F_CHGRST_STATE, + F_OTPLD_STATE, + F_ALLRST_STATE, + F_PROTECT_SET, + F_MAP_SET, + F_ADCINTERVAL, + F_ADCMOD, + F_ADCTMOD, + F_EXTIADPEN, + F_VSYSENB, + F_VCCENB, + F_VBUSENB, + F_VACPENB, + F_IACPENB, + F_THERMENB, + F_VBATENB, + F_IBATMENB, + F_IBATPENB, + F_TMPTHR1B, + F_TMPTHR1A, + F_TMPTHR2B, + F_TMPTHR2A, + F_TMPTHR3B, + F_TMPTHR3A, + F_TMPTHR4B, + F_TMPTHR4A, + F_TMPTHR5B, + F_TMPTHR5A, + F_IBATP_TH_SET, + F_IBATM_TH_SET, + F_VBAT_TH_SET, + F_THERM_TH_SET, + F_IACP_TH_SET, + F_VACP_TH_SET, + F_VBUS_TH_SET, + F_VCC_TH_SET, + F_VSYS_TH_SET, + F_EXTIADP_TH_SET, + F_IBATP_VAL, + F_IBATP_AVE_VAL, + F_IBATM_VAL, + F_IBATM_AVE_VAL, + F_VBAT_VAL, + F_VBAT_AVE_VAL, + F_THERM_VAL, + F_VTH_VAL, + F_IACP_VAL, + F_IACP_AVE_VAL, + F_VACP_VAL, + F_VACP_AVE_VAL, + F_VBUS_VAL, + F_VBUS_AVE_VAL, + F_VCC_VAL, + F_VCC_AVE_VAL, + F_VSYS_VAL, + F_VSYS_AVE_VAL, + F_EXTIADP_VAL, + F_EXTIADP_AVE_VAL, + F_VACPCLPS_TH_SET, + F_INT7_SET, + F_INT6_SET, + F_INT5_SET, + F_INT4_SET, + F_INT3_SET, + F_INT2_SET, + F_INT1_SET, + F_INT0_SET, + F_VBUS_RBUV_DET, + F_VBUS_RBUV_RES, + F_VBUS_TH_DET, + F_VBUS_TH_RES, + F_VBUS_IIN_MOD, + F_VBUS_OV_DET, + F_VBUS_OV_RES, + F_VBUS_CLPS_DET, + F_VBUS_CLPS, + F_VBUS_DET, + F_VBUS_RES, + F_VCC_RBUV_DET, + F_VCC_RBUV_RES, + F_VCC_TH_DET, + F_VCC_TH_RES, + F_VCC_IIN_MOD, + F_VCC_OVP_DET, + F_VCC_OVP_RES, + F_VCC_CLPS_DET, + F_VCC_CLPS_RES, + F_VCC_DET, + F_VCC_RES, + F_TH_DET, + F_TH_RMV, + F_TMP_OUT_DET, + F_TMP_OUT_RES, + F_VBAT_TH_DET, + F_VBAT_TH_RES, + F_IBAT_SHORT_DET, + F_IBAT_SHORT_RES, + F_VBAT_OV_DET, + F_VBAT_OV_RES, + F_BAT_ASSIST_DET, + F_BAT_ASSIST_RES, + F_VSYS_TH_DET, + F_VSYS_TH_RES, + F_VSYS_OV_DET, + F_VSYS_OV_RES, + F_VSYS_SHT_DET, + F_VSYS_SHT_RES, + F_VSYS_UV_DET, + F_VSYS_UV_RES, + F_OTP_LOAD_DONE, + F_PWR_ON, + F_EXTIADP_TRNS, + F_EXTIADP_TH_DET, + F_EXIADP_TH_RES, + F_BAT_MNT_DET, + F_BAT_MNT_RES, + F_TSD_DET, + F_TSD_RES, + F_CHGWDT_EXP, + F_THERMWDT_EXP, + F_TMP_TRNS, + F_CHG_TRNS, + F_VBUS_UCD_PORT_DET, + F_VBUS_UCD_UCHG_DET, + F_VBUS_UCD_URID_RMV, + F_VBUS_UCD_OTG_DET, + F_VBUS_UCD_URID_MOD, + F_VCC_UCD_PORT_DET, + F_VCC_UCD_UCHG_DET, + F_VCC_UCD_URID_RMV, + F_VCC_UCD_OTG_DET, + F_VCC_UCD_URID_MOD, + F_PROCHOT_DET, + F_PROCHOT_RES, + F_VACP_DET, + F_VACP_RES, + F_VACP_TH_DET, + F_VACP_TH_RES, + F_IACP_TH_DET, + F_IACP_THE_RES, + F_THERM_TH_DET, + F_THERM_TH_RES, + F_IBATM_TH_DET, + F_IBATM_TH_RES, + F_IBATP_TH_DET, + F_IBATP_TH_RES, + F_INT7_STATUS, + F_INT6_STATUS, + F_INT5_STATUS, + F_INT4_STATUS, + F_INT3_STATUS, + F_INT2_STATUS, + F_INT1_STATUS, + F_INT0_STATUS, + F_ILIM_DECREASE, + F_RESERVE_OTPREG1, + F_POWER_SAVE_MODE, + F_DEBUG_MODE_SET, + F_DEBUG0x14, + F_DEBUG0x1A, + F_MAX_FIELDS +}; + +static const struct reg_field bd9995x_reg_fields[] = { + [F_PREV_CHGSTM_STATE] = REG_FIELD(CHGSTM_STATUS, 8, 14), + [F_CHGSTM_STATE] = REG_FIELD(CHGSTM_STATUS, 0, 6), + [F_VBAT_VSYS_STATUS] = REG_FIELD(VBAT_VSYS_STATUS, 0, 15), + [F_VBUS_VCC_STATUS] = REG_FIELD(VBUS_VCC_STATUS, 0, 12), + [F_BATTEMP] = REG_FIELD(CHGOP_STATUS, 8, 10), + [F_VRECHG_DET] = REG_FIELD(CHGOP_STATUS, 6, 6), + [F_RBOOST_UV] = REG_FIELD(CHGOP_STATUS, 1, 1), + [F_RBOOSTS] = REG_FIELD(CHGOP_STATUS, 0, 0), + [F_THERMWDT_VAL] = REG_FIELD(WDT_STATUS, 8, 15), + [F_CHGWDT_VAL] = REG_FIELD(WDT_STATUS, 0, 7), + [F_CUR_ILIM_VAL] = REG_FIELD(CUR_ILIM_VAL, 0, 13), + [F_SEL_ILIM_VAL] = REG_FIELD(SEL_ILIM_VAL, 0, 13), + [F_IBUS_LIM_SET] = REG_FIELD(IBUS_LIM_SET, 5, 13), + [F_ICC_LIM_SET] = REG_FIELD(ICC_LIM_SET, 5, 13), + [F_IOTG_LIM_SET] = REG_FIELD(IOTG_LIM_SET, 5, 13), + [F_OTG_BOTH_EN] = REG_FIELD(VIN_CTRL_SET, 15, 15), + [F_VRBOOST_TRIG] = REG_FIELD(VIN_CTRL_SET, 14, 14), + [F_VRBOOST_EN] = REG_FIELD(VIN_CTRL_SET, 12, 13), + [F_PP_BOTH_THRU] = REG_FIELD(VIN_CTRL_SET, 11, 11), + [F_VIN_ORD] = REG_FIELD(VIN_CTRL_SET, 7, 7), + [F_VBUS_EN] = REG_FIELD(VIN_CTRL_SET, 6, 6), + [F_VCC_EN] = REG_FIELD(VIN_CTRL_SET, 5, 5), + [F_VSYS_PRIORITY] = REG_FIELD(VIN_CTRL_SET, 4, 4), + [F_PPC_SUB_CAP] = REG_FIELD(VIN_CTRL_SET, 2, 3), + [F_PPC_CAP] = REG_FIELD(VIN_CTRL_SET, 0, 1), + [F_DCP_2500_SEL] = REG_FIELD(CHGOP_SET1, 15, 15), + [F_SDP_500_SEL] = REG_FIELD(CHGOP_SET1, 14, 14), + [F_ILIM_AUTO_DISEN] = REG_FIELD(CHGOP_SET1, 13, 13), + [F_VCC_BC_DISEN] = REG_FIELD(CHGOP_SET1, 11, 11), + [F_VBUS_BC_DISEN] = REG_FIELD(CHGOP_SET1, 10, 10), + [F_SDP_CHG_TRIG_EN] = REG_FIELD(CHGOP_SET1, 9, 9), + [F_SDP_CHG_TRIG] = REG_FIELD(CHGOP_SET1, 8, 8), + [F_AUTO_TOF] = REG_FIELD(CHGOP_SET1, 6, 6), + [F_AUTO_FST] = REG_FIELD(CHGOP_SET1, 5, 5), + [F_AUTO_RECH] = REG_FIELD(CHGOP_SET1, 3, 3), + [F_ILIM_RESET_EN] = REG_FIELD(CHGOP_SET2, 14, 14), + [F_DCDC_1MS_SEL] = REG_FIELD(CHGOP_SET2, 12, 13), + [F_SEL_ILIM_DIV] = REG_FIELD(CHGOP_SET2, 10, 10), + [F_BATT_LEARN] = REG_FIELD(CHGOP_SET2, 8, 8), + [F_CHG_EN] = REG_FIELD(CHGOP_SET2, 7, 7), + [F_USB_SUS] = REG_FIELD(CHGOP_SET2, 6, 6), + [F_CHOP_SS_INIT] = REG_FIELD(CHGOP_SET2, 5, 5), + [F_CHOP_ALL_INIT] = REG_FIELD(CHGOP_SET2, 4, 4), + [F_DCDC_CLK_SEL] = REG_FIELD(CHGOP_SET2, 2, 3), + [F_CHOP_SS] = REG_FIELD(CHGOP_SET2, 1, 1), + [F_CHOP_ALL] = REG_FIELD(CHGOP_SET2, 0, 0), + [F_VBUSCLPS_TH_SET] = REG_FIELD(VBUSCLPS_TH_SET, 7, 14), + [F_VCCCLPS_TH_SET] = REG_FIELD(VCCCLPS_TH_SET, 7, 14), + [F_WDT_FST] = REG_FIELD(CHGWDT_SET, 8, 15), + [F_WDT_PRE] = REG_FIELD(CHGWDT_SET, 0, 7), + [F_WDT_IBAT_SHORT] = REG_FIELD(BATTWDT_SET, 8, 15), + [F_WDT_THERM] = REG_FIELD(BATTWDT_SET, 0, 7), + [F_VSYSREG_SET] = REG_FIELD(VSYSREG_SET, 6, 14), + [F_VSYSVAL_THH_SET] = REG_FIELD(VSYSVAL_THH_SET, 6, 14), + [F_VSYSVAL_THL_SET] = REG_FIELD(VSYSVAL_THL_SET, 6, 14), + [F_ITRICH_SET] = REG_FIELD(ITRICH_SET, 6, 10), + [F_IPRECH_SET] = REG_FIELD(IPRECH_SET, 6, 10), + [F_ICHG_SET] = REG_FIELD(ICHG_SET, 6, 13), + [F_ITERM_SET] = REG_FIELD(ITERM_SET, 6, 10), + [F_VPRECHG_TH_SET] = REG_FIELD(VPRECHG_TH_SET, 6, 14), + [F_VRBOOST_SET] = REG_FIELD(VRBOOST_SET, 6, 14), + [F_VFASTCHG_REG_SET1] = REG_FIELD(VFASTCHG_REG_SET1, 4, 14), + [F_VFASTCHG_REG_SET2] = REG_FIELD(VFASTCHG_REG_SET2, 4, 14), + [F_VFASTCHG_REG_SET3] = REG_FIELD(VFASTCHG_REG_SET3, 4, 14), + [F_VRECHG_SET] = REG_FIELD(VRECHG_SET, 4, 14), + [F_VBATOVP_SET] = REG_FIELD(VBATOVP_SET, 4, 14), + [F_IBATM_SHORT_SET] = REG_FIELD(IBATSHORT_SET, 0, 14), + [F_PROCHOT_DG_SET] = REG_FIELD(PROCHOT_CTRL_SET, 14, 15), + [F_PROCHOT_ICRIT_DG_SET] = REG_FIELD(PROCHOT_CTRL_SET, 10, 11), + [F_PROCHOT_IDCHG_DG_SET] = REG_FIELD(PROCHOT_CTRL_SET, 8, 9), + [F_PROCHOT_EN] = REG_FIELD(PROCHOT_CTRL_SET, 0, 4), + [F_PROCHOT_ICRIT_SET] = REG_FIELD(PROCHOT_ICRIT_SET, 0, 14), + [F_PROCHOT_INORM_SET] = REG_FIELD(PROCHOT_INORM_SET, 0, 14), + [F_PROCHOT_IDCHG_SET] = REG_FIELD(PROCHOT_IDCHG_SET, 0, 14), + [F_PROCHOT_VSYS_SET] = REG_FIELD(PROCHOT_VSYS_SET, 0, 14), + [F_IMON_INSEL] = REG_FIELD(PMON_IOUT_CTRL_SET, 9, 9), + [F_PMON_INSEL] = REG_FIELD(PMON_IOUT_CTRL_SET, 8, 8), + [F_IOUT_OUT_EN] = REG_FIELD(PMON_IOUT_CTRL_SET, 7, 7), + [F_IOUT_SOURCE_SEL] = REG_FIELD(PMON_IOUT_CTRL_SET, 6, 6), + [F_IOUT_GAIN_SET] = REG_FIELD(PMON_IOUT_CTRL_SET, 4, 5), + [F_PMON_OUT_EN] = REG_FIELD(PMON_IOUT_CTRL_SET, 3, 3), + [F_PMON_GAIN_SET] = REG_FIELD(PMON_IOUT_CTRL_SET, 0, 2), + [F_PMON_DACIN_VAL] = REG_FIELD(PMON_DACIN_VAL, 0, 9), + [F_IOUT_DACIN_VAL] = REG_FIELD(IOUT_DACIN_VAL, 0, 11), + [F_VCC_BCSRETRY] = REG_FIELD(VCC_UCD_SET, 12, 12), + [F_VCC_ADCRTRY] = REG_FIELD(VCC_UCD_SET, 8, 8), + [F_VCC_USBDETEN] = REG_FIELD(VCC_UCD_SET, 7, 7), + [F_VCC_IDRDETEN] = REG_FIELD(VCC_UCD_SET, 6, 6), + [F_VCC_ENUMRDY] = REG_FIELD(VCC_UCD_SET, 5, 5), + [F_VCC_ADCPOLEN] = REG_FIELD(VCC_UCD_SET, 4, 4), + [F_VCC_DCDMODE] = REG_FIELD(VCC_UCD_SET, 3, 3), + [F_VCC_USB_SW_EN] = REG_FIELD(VCC_UCD_SET, 1, 1), + [F_VCC_USB_SW] = REG_FIELD(VCC_UCD_SET, 0, 0), + [F_VCC_DCDFAIL] = REG_FIELD(VCC_UCD_STATUS, 15, 15), + [F_VCC_CHGPORT] = REG_FIELD(VCC_UCD_STATUS, 12, 13), + [F_VCC_PUPDET] = REG_FIELD(VCC_UCD_STATUS, 11, 11), + [F_VCC_VBUS_VLD] = REG_FIELD(VCC_UCD_STATUS, 7, 7), + [F_VCC_CHGDET] = REG_FIELD(VCC_UCD_STATUS, 6, 6), + [F_VCC_OTGDET] = REG_FIELD(VCC_UCD_STATUS, 3, 3), + [F_VCC_VBINOP] = REG_FIELD(VCC_IDD_STATUS, 6, 6), + [F_VCC_EXTID] = REG_FIELD(VCC_IDD_STATUS, 5, 5), + [F_VCC_IDRDET] = REG_FIELD(VCC_IDD_STATUS, 4, 4), + [F_VCC_INDO] = REG_FIELD(VCC_IDD_STATUS, 0, 3), + [F_VCC_UCDSWEN] = REG_FIELD(VCC_UCD_FCTRL_SET, 10, 10), + [F_VCC_RREF_EN] = REG_FIELD(VCC_UCD_FCTRL_SET, 9, 9), + [F_VCC_DPPU_EN] = REG_FIELD(VCC_UCD_FCTRL_SET, 8, 8), + [F_VCC_DPREF_EN] = REG_FIELD(VCC_UCD_FCTRL_SET, 7, 7), + [F_VCC_DMREF_EN] = REG_FIELD(VCC_UCD_FCTRL_SET, 6, 6), + [F_VCC_DPDET_EN] = REG_FIELD(VCC_UCD_FCTRL_SET, 5, 5), + [F_VCC_DMDET_EN] = REG_FIELD(VCC_UCD_FCTRL_SET, 4, 4), + [F_VCC_DPSINK_EN] = REG_FIELD(VCC_UCD_FCTRL_SET, 3, 3), + [F_VCC_DMSINK_EN] = REG_FIELD(VCC_UCD_FCTRL_SET, 2, 2), + [F_VCC_DP_BUFF_EN] = REG_FIELD(VCC_UCD_FCTRL_SET, 1, 1), + [F_VCC_DM_BUFF_EN] = REG_FIELD(VCC_UCD_FCTRL_SET, 0, 0), + [F_VCC_EXTCLKENBL] = REG_FIELD(VCC_UCD_FCTRL_EN, 15, 15), + [F_VCC_PLSTESTEN] = REG_FIELD(VCC_UCD_FCTRL_EN, 14, 14), + [F_VCC_UCDSWEN_TSTENB] = REG_FIELD(VCC_UCD_FCTRL_EN, 10, 10), + [F_VCC_RREF_EN_TSTENB] = REG_FIELD(VCC_UCD_FCTRL_EN, 9, 9), + [F_VCC_DPPU_EN_TSTENB] = REG_FIELD(VCC_UCD_FCTRL_EN, 8, 8), + [F_VCC_DPREF_EN_TSTENB] = REG_FIELD(VCC_UCD_FCTRL_EN, 7, 7), + [F_VCC_DMREF_EN_TSTENB] = REG_FIELD(VCC_UCD_FCTRL_EN, 6, 6), + [F_VCC_DPDET_EN_TSTENB] = REG_FIELD(VCC_UCD_FCTRL_EN, 5, 5), + [F_VCC_DMDET_EN_TSTENB] = REG_FIELD(VCC_UCD_FCTRL_EN, 4, 4), + [F_VCC_DPSINK_EN_TSTENB] = REG_FIELD(VCC_UCD_FCTRL_EN, 3, 3), + [F_VCC_DMSINK_EN_TSTENB] = REG_FIELD(VCC_UCD_FCTRL_EN, 2, 2), + [F_VCC_DP_BUFF_EN_TSTENB] = REG_FIELD(VCC_UCD_FCTRL_EN, 1, 1), + [F_VCC_DM_BUFF_EN_TSTENB] = REG_FIELD(VCC_UCD_FCTRL_EN, 0, 0), + + [F_VBUS_BCSRETRY] = REG_FIELD(VBUS_UCD_SET, 12, 12), + [F_VBUS_ADCRTRY] = REG_FIELD(VBUS_UCD_SET, 8, 8), + [F_VBUS_USBDETEN] = REG_FIELD(VBUS_UCD_SET, 7, 7), + [F_VBUS_IDRDETEN] = REG_FIELD(VBUS_UCD_SET, 6, 6), + [F_VBUS_ENUMRDY] = REG_FIELD(VBUS_UCD_SET, 5, 5), + [F_VBUS_ADCPOLEN] = REG_FIELD(VBUS_UCD_SET, 4, 4), + [F_VBUS_DCDMODE] = REG_FIELD(VBUS_UCD_SET, 3, 3), + [F_VBUS_USB_SW_EN] = REG_FIELD(VBUS_UCD_SET, 1, 1), + [F_VBUS_USB_SW] = REG_FIELD(VBUS_UCD_SET, 0, 0), + [F_VBUS_DCDFAIL] = REG_FIELD(VBUS_UCD_STATUS, 15, 15), + [F_VBUS_CHGPORT] = REG_FIELD(VBUS_UCD_STATUS, 12, 13), + [F_VBUS_PUPDET] = REG_FIELD(VBUS_UCD_STATUS, 11, 11), + [F_VBUS_VBUS_VLD] = REG_FIELD(VBUS_UCD_STATUS, 7, 7), + [F_VBUS_CHGDET] = REG_FIELD(VBUS_UCD_STATUS, 6, 6), + [F_VBUS_OTGDET] = REG_FIELD(VBUS_UCD_STATUS, 3, 3), + [F_VBUS_VBINOP] = REG_FIELD(VBUS_IDD_STATUS, 6, 6), + [F_VBUS_EXTID] = REG_FIELD(VBUS_IDD_STATUS, 5, 5), + [F_VBUS_IDRDET] = REG_FIELD(VBUS_IDD_STATUS, 4, 4), + [F_VBUS_INDO] = REG_FIELD(VBUS_IDD_STATUS, 0, 3), + [F_VBUS_UCDSWEN] = REG_FIELD(VCC_UCD_FCTRL_SET, 10, 10), + [F_VBUS_RREF_EN] = REG_FIELD(VCC_UCD_FCTRL_SET, 9, 9), + [F_VBUS_DPPU_EN] = REG_FIELD(VCC_UCD_FCTRL_SET, 8, 8), + [F_VBUS_DPREF_EN] = REG_FIELD(VCC_UCD_FCTRL_SET, 7, 7), + [F_VBUS_DMREF_EN] = REG_FIELD(VCC_UCD_FCTRL_SET, 6, 6), + [F_VBUS_DPDET_EN] = REG_FIELD(VCC_UCD_FCTRL_SET, 5, 5), + [F_VBUS_DMDET_EN] = REG_FIELD(VCC_UCD_FCTRL_SET, 4, 4), + [F_VBUS_DPSINK_EN] = REG_FIELD(VCC_UCD_FCTRL_SET, 3, 3), + [F_VBUS_DMSINK_EN] = REG_FIELD(VCC_UCD_FCTRL_SET, 2, 2), + [F_VBUS_DP_BUFF_EN] = REG_FIELD(VCC_UCD_FCTRL_SET, 1, 1), + [F_VBUS_DM_BUFF_EN] = REG_FIELD(VCC_UCD_FCTRL_SET, 0, 0), + + [F_VBUS_EXTCLKENBL] = REG_FIELD(VBUS_UCD_FCTRL_EN, 15, 15), + [F_VBUS_PLSTESTEN] = REG_FIELD(VBUS_UCD_FCTRL_EN, 14, 14), + [F_VBUS_UCDSWEN_TSTENB] = REG_FIELD(VBUS_UCD_FCTRL_EN, 10, 10), + [F_VBUS_RREF_EN_TSTENB] = REG_FIELD(VBUS_UCD_FCTRL_EN, 9, 9), + [F_VBUS_DPPU_EN_TSTENB] = REG_FIELD(VBUS_UCD_FCTRL_EN, 8, 8), + [F_VBUS_DPREF_EN_TSTENB] = REG_FIELD(VBUS_UCD_FCTRL_EN, 7, 7), + [F_VBUS_DMREF_EN_TSTENB] = REG_FIELD(VBUS_UCD_FCTRL_EN, 6, 6), + [F_VBUS_DPDET_EN_TSTENB] = REG_FIELD(VBUS_UCD_FCTRL_EN, 5, 5), + [F_VBUS_DMDET_EN_TSTENB] = REG_FIELD(VBUS_UCD_FCTRL_EN, 4, 4), + [F_VBUS_DPSINK_EN_TSTENB] = REG_FIELD(VBUS_UCD_FCTRL_EN, 3, 3), + [F_VBUS_DMSINK_EN_TSTENB] = REG_FIELD(VBUS_UCD_FCTRL_EN, 2, 2), + [F_VBUS_DP_BUFF_EN_TSTENB] = REG_FIELD(VBUS_UCD_FCTRL_EN, 1, 1), + [F_VBUS_DM_BUFF_EN_TSTENB] = REG_FIELD(VBUS_UCD_FCTRL_EN, 0, 0), + + [F_CHIP_ID] = REG_FIELD(CHIP_ID, 0, 15), + [F_CHIP_REV] = REG_FIELD(CHIP_REV, 0, 15), + [F_ONE_CELL_MODE] = REG_FIELD(IC_SET1, 11, 11), + [F_cell] = REG_FIELD(IC_SET1, 1, 1), + [F_VACP_AUTO_DISCHG] = REG_FIELD(IC_SET1, 9, 9), + [F_VACP_LOAD] = REG_FIELD(IC_SET1, 8, 8), + [F_ACOK_POL] = REG_FIELD(IC_SET1, 1, 1), + [F_ACOK_DISEN] = REG_FIELD(IC_SET1, 0, 0), + [F_DEBUG_SET1] = REG_FIELD(IC_SET2, 4, 8), + [F_DEBUG_SET0] = REG_FIELD(IC_SET2, 0, 0), + [F_MONRST_STATE] = REG_FIELD(SYSTEM_STATUS, 6, 6), + [F_ALMRST_STATE] = REG_FIELD(SYSTEM_STATUS, 5, 5), + [F_CHGRST_STATE] = REG_FIELD(SYSTEM_STATUS, 4, 4), + [F_OTPLD_STATE] = REG_FIELD(SYSTEM_STATUS, 1, 1), + [F_ALLRST_STATE] = REG_FIELD(SYSTEM_STATUS, 0, 0), + [F_PROTECT_SET] = REG_FIELD(PROTECT_SET, 0, 15), + [F_MAP_SET] = REG_FIELD(MAP_SET, 0, 15), + [F_ADCINTERVAL] = REG_FIELD(VM_CTRL_SET, 14, 15), + [F_ADCMOD] = REG_FIELD(VM_CTRL_SET, 12, 13), + [F_ADCTMOD] = REG_FIELD(VM_CTRL_SET, 10, 11), + [F_EXTIADPEN] = REG_FIELD(VM_CTRL_SET, 9, 9), + [F_VSYSENB] = REG_FIELD(VM_CTRL_SET, 8, 8), + [F_VCCENB] = REG_FIELD(VM_CTRL_SET, 7, 7), + [F_VBUSENB] = REG_FIELD(VM_CTRL_SET, 6, 6), + [F_VACPENB] = REG_FIELD(VM_CTRL_SET, 5, 5), + [F_IACPENB] = REG_FIELD(VM_CTRL_SET, 4, 4), + [F_THERMENB] = REG_FIELD(VM_CTRL_SET, 3, 3), + [F_VBATENB] = REG_FIELD(VM_CTRL_SET, 2, 2), + [F_IBATMENB] = REG_FIELD(VM_CTRL_SET, 1, 1), + [F_IBATPENB] = REG_FIELD(VM_CTRL_SET, 0, 0), + [F_TMPTHR1B] = REG_FIELD(THERM_WINDOW_SET1, 8, 15), + [F_TMPTHR1A] = REG_FIELD(THERM_WINDOW_SET1, 0, 7), + [F_TMPTHR2B] = REG_FIELD(THERM_WINDOW_SET2, 8, 15), + [F_TMPTHR2A] = REG_FIELD(THERM_WINDOW_SET2, 0, 7), + [F_TMPTHR3B] = REG_FIELD(THERM_WINDOW_SET3, 8, 15), + [F_TMPTHR3A] = REG_FIELD(THERM_WINDOW_SET3, 0, 7), + [F_TMPTHR4B] = REG_FIELD(THERM_WINDOW_SET4, 8, 15), + [F_TMPTHR4A] = REG_FIELD(THERM_WINDOW_SET4, 0, 7), + [F_TMPTHR5B] = REG_FIELD(THERM_WINDOW_SET5, 8, 15), + [F_TMPTHR5A] = REG_FIELD(THERM_WINDOW_SET5, 0, 7), + [F_IBATP_TH_SET] = REG_FIELD(IBATP_TH_SET, 0, 14), + [F_IBATM_TH_SET] = REG_FIELD(IBATM_TH_SET, 0, 14), + [F_VBAT_TH_SET] = REG_FIELD(VBAT_TH_SET, 0, 14), + [F_THERM_TH_SET] = REG_FIELD(THERM_TH_SET, 0, 7), + [F_IACP_TH_SET] = REG_FIELD(IACP_TH_SET, 0, 14), + [F_VACP_TH_SET] = REG_FIELD(VACP_TH_SET, 0, 14), + [F_VBUS_TH_SET] = REG_FIELD(VBUS_TH_SET, 0, 14), + [F_VCC_TH_SET] = REG_FIELD(VCC_TH_SET, 0, 14), + [F_VSYS_TH_SET] = REG_FIELD(VSYS_TH_SET, 0, 14), + [F_EXTIADP_TH_SET] = REG_FIELD(EXTIADP_TH_SET, 0, 11), + [F_IBATP_VAL] = REG_FIELD(IBATP_VAL, 0, 14), + [F_IBATP_AVE_VAL] = REG_FIELD(IBATP_AVE_VAL, 0, 14), + [F_IBATM_VAL] = REG_FIELD(IBATM_VAL, 0, 14), + [F_IBATM_AVE_VAL] = REG_FIELD(IBATM_AVE_VAL, 0, 14), + [F_VBAT_VAL] = REG_FIELD(VBAT_VAL, 0, 14), + [F_VBAT_AVE_VAL] = REG_FIELD(VBAT_AVE_VAL, 0, 14), + [F_THERM_VAL] = REG_FIELD(THERM_VAL, 0, 7), + [F_VTH_VAL] = REG_FIELD(VTH_VAL, 0, 11), + [F_IACP_VAL] = REG_FIELD(IACP_VAL, 0, 14), + [F_IACP_AVE_VAL] = REG_FIELD(IACP_AVE_VAL, 0, 14), + [F_VACP_VAL] = REG_FIELD(VACP_VAL, 0, 14), + [F_VACP_AVE_VAL] = REG_FIELD(VACP_AVE_VAL, 0, 14), + [F_VBUS_VAL] = REG_FIELD(VBUS_VAL, 0, 14), + [F_VBUS_AVE_VAL] = REG_FIELD(VBUS_AVE_VAL, 0, 14), + [F_VCC_VAL] = REG_FIELD(VCC_VAL, 0, 14), + [F_VCC_AVE_VAL] = REG_FIELD(VCC_AVE_VAL, 0, 14), + [F_VSYS_VAL] = REG_FIELD(VSYS_VAL, 0, 14), + [F_VSYS_AVE_VAL] = REG_FIELD(VSYS_AVE_VAL, 0, 14), + [F_EXTIADP_VAL] = REG_FIELD(EXTIADP_VAL, 0, 11), + [F_EXTIADP_AVE_VAL] = REG_FIELD(EXTIADP_AVE_VAL, 0, 11), + [F_VACPCLPS_TH_SET] = REG_FIELD(VACPCLPS_TH_SET, 7, 14), + [F_INT7_SET] = REG_FIELD(INT7_SET, 0, 15), + [F_INT6_SET] = REG_FIELD(INT6_SET, 0, 13), + [F_INT5_SET] = REG_FIELD(INT5_SET, 0, 13), + [F_INT4_SET] = REG_FIELD(INT4_SET, 0, 9), + [F_INT3_SET] = REG_FIELD(INT3_SET, 0, 15), + [F_INT2_SET] = REG_FIELD(INT2_SET, 0, 15), + [F_INT1_SET] = REG_FIELD(INT1_SET, 0, 15), + [F_INT0_SET] = REG_FIELD(INT0_SET, 0, 7), + [F_VBUS_RBUV_DET] = REG_FIELD(INT1_SET, 15, 15), + [F_VBUS_RBUV_RES] = REG_FIELD(INT1_SET, 14, 14), + [F_VBUS_TH_DET] = REG_FIELD(INT1_SET, 9, 9), + [F_VBUS_TH_RES] = REG_FIELD(INT1_SET, 8, 8), + [F_VBUS_IIN_MOD] = REG_FIELD(INT1_SET, 6, 6), + [F_VBUS_OV_DET] = REG_FIELD(INT1_SET, 5, 5), + [F_VBUS_OV_RES] = REG_FIELD(INT1_SET, 4, 4), + [F_VBUS_CLPS_DET] = REG_FIELD(INT1_SET, 3, 3), + [F_VBUS_CLPS] = REG_FIELD(INT1_SET, 2, 2), + [F_VBUS_DET] = REG_FIELD(INT1_SET, 1, 1), + [F_VBUS_RES] = REG_FIELD(INT1_SET, 0, 0), + [F_VCC_RBUV_DET] = REG_FIELD(INT2_SET, 15, 15), + [F_VCC_RBUV_RES] = REG_FIELD(INT2_SET, 14, 14), + [F_VCC_TH_DET] = REG_FIELD(INT2_SET, 9, 9), + [F_VCC_TH_RES] = REG_FIELD(INT2_SET, 8, 8), + [F_VCC_IIN_MOD] = REG_FIELD(INT2_SET, 6, 6), + [F_VCC_OVP_DET] = REG_FIELD(INT2_SET, 5, 5), + [F_VCC_OVP_RES] = REG_FIELD(INT2_SET, 4, 4), + [F_VCC_CLPS_DET] = REG_FIELD(INT2_SET, 3, 3), + [F_VCC_CLPS_RES] = REG_FIELD(INT2_SET, 2, 2), + [F_VCC_DET] = REG_FIELD(INT2_SET, 1, 1), + [F_VCC_RES] = REG_FIELD(INT2_SET, 0, 0), + [F_TH_DET] = REG_FIELD(INT3_SET, 15, 15), + [F_TH_RMV] = REG_FIELD(INT3_SET, 14, 14), + [F_TMP_OUT_DET] = REG_FIELD(INT3_SET, 11, 11), + [F_TMP_OUT_RES] = REG_FIELD(INT3_SET, 10, 10), + [F_VBAT_TH_DET] = REG_FIELD(INT3_SET, 9, 9), + [F_VBAT_TH_RES] = REG_FIELD(INT3_SET, 8, 8), + [F_IBAT_SHORT_DET] = REG_FIELD(INT3_SET, 7, 7), + [F_IBAT_SHORT_RES] = REG_FIELD(INT3_SET, 6, 6), + [F_VBAT_OV_DET] = REG_FIELD(INT3_SET, 5, 5), + [F_VBAT_OV_RES] = REG_FIELD(INT3_SET, 4, 4), + [F_BAT_ASSIST_DET] = REG_FIELD(INT3_SET, 3, 3), + [F_BAT_ASSIST_RES] = REG_FIELD(INT3_SET, 2, 2), + [F_VSYS_TH_DET] = REG_FIELD(INT4_SET, 9, 9), + [F_VSYS_TH_RES] = REG_FIELD(INT4_SET, 8, 8), + [F_VSYS_OV_DET] = REG_FIELD(INT4_SET, 5, 5), + [F_VSYS_OV_RES] = REG_FIELD(INT4_SET, 4, 4), + [F_VSYS_SHT_DET] = REG_FIELD(INT4_SET, 3, 3), + [F_VSYS_SHT_RES] = REG_FIELD(INT4_SET, 2, 2), + [F_VSYS_UV_DET] = REG_FIELD(INT4_SET, 1, 1), + [F_VSYS_UV_RES] = REG_FIELD(INT4_SET, 0, 0), + [F_OTP_LOAD_DONE] = REG_FIELD(INT5_SET, 13, 13), + [F_PWR_ON] = REG_FIELD(INT5_SET, 12, 12), + [F_EXTIADP_TRNS] = REG_FIELD(INT5_SET, 11, 11), + [F_EXTIADP_TH_DET] = REG_FIELD(INT5_SET, 9, 9), + [F_EXIADP_TH_RES] = REG_FIELD(INT5_SET, 8, 8), + [F_BAT_MNT_DET] = REG_FIELD(INT5_SET, 7, 7), + [F_BAT_MNT_RES] = REG_FIELD(INT5_SET, 6, 6), + [F_TSD_DET] = REG_FIELD(INT5_SET, 5, 5), + [F_TSD_RES] = REG_FIELD(INT5_SET, 4, 4), + [F_CHGWDT_EXP] = REG_FIELD(INT5_SET, 3, 3), + [F_THERMWDT_EXP] = REG_FIELD(INT5_SET, 2, 2), + [F_TMP_TRNS] = REG_FIELD(INT5_SET, 1, 1), + [F_CHG_TRNS] = REG_FIELD(INT5_SET, 0, 0), + [F_VBUS_UCD_PORT_DET] = REG_FIELD(INT6_SET, 13, 13), + [F_VBUS_UCD_UCHG_DET] = REG_FIELD(INT6_SET, 12, 12), + [F_VBUS_UCD_URID_RMV] = REG_FIELD(INT6_SET, 11, 11), + [F_VBUS_UCD_OTG_DET] = REG_FIELD(INT6_SET, 10, 10), + [F_VBUS_UCD_URID_MOD] = REG_FIELD(INT6_SET, 8, 8), + [F_VCC_UCD_PORT_DET] = REG_FIELD(INT6_SET, 5, 5), + [F_VCC_UCD_UCHG_DET] = REG_FIELD(INT6_SET, 4, 4), + [F_VCC_UCD_URID_RMV] = REG_FIELD(INT6_SET, 3, 3), + [F_VCC_UCD_OTG_DET] = REG_FIELD(INT6_SET, 2, 2), + [F_VCC_UCD_URID_MOD] = REG_FIELD(INT6_SET, 0, 0), + [F_PROCHOT_DET] = REG_FIELD(INT7_SET, 15, 15), + [F_PROCHOT_RES] = REG_FIELD(INT7_SET, 14, 14), + [F_VACP_DET] = REG_FIELD(INT7_SET, 11, 11), + [F_VACP_RES] = REG_FIELD(INT7_SET, 10, 10), + [F_VACP_TH_DET] = REG_FIELD(INT7_SET, 9, 9), + [F_VACP_TH_RES] = REG_FIELD(INT7_SET, 8, 8), + [F_IACP_TH_DET] = REG_FIELD(INT7_SET, 7, 7), + [F_IACP_THE_RES] = REG_FIELD(INT7_SET, 6, 6), + [F_THERM_TH_DET] = REG_FIELD(INT7_SET, 5, 5), + [F_THERM_TH_RES] = REG_FIELD(INT7_SET, 4, 4), + [F_IBATM_TH_DET] = REG_FIELD(INT7_SET, 3, 3), + [F_IBATM_TH_RES] = REG_FIELD(INT7_SET, 2, 2), + [F_IBATP_TH_DET] = REG_FIELD(INT7_SET, 1, 1), + [F_IBATP_TH_RES] = REG_FIELD(INT7_SET, 0, 0), + [F_INT7_STATUS] = REG_FIELD(INT7_STATUS, 0, 15), + [F_INT6_STATUS] = REG_FIELD(INT6_STATUS, 0, 13), + [F_INT5_STATUS] = REG_FIELD(INT5_STATUS, 0, 13), + [F_INT4_STATUS] = REG_FIELD(INT4_STATUS, 0, 9), + [F_INT3_STATUS] = REG_FIELD(INT3_STATUS, 0, 15), + [F_INT2_STATUS] = REG_FIELD(INT2_STATUS, 0, 15), + [F_INT1_STATUS] = REG_FIELD(INT1_STATUS, 0, 15), + [F_INT0_STATUS] = REG_FIELD(INT0_STATUS, 0, 7), + [F_ILIM_DECREASE] = REG_FIELD(OTPREG0, 0, 15), + [F_RESERVE_OTPREG1] = REG_FIELD(OTPREG1, 0, 15), + [F_POWER_SAVE_MODE] = REG_FIELD(SMBREG, 0, 15), + [F_DEBUG_MODE_SET] = REG_FIELD(DEBUG_MODE_SET, 0, 15), + [F_DEBUG0x14] = REG_FIELD(DEBUG0x14, 0, 15), + [F_DEBUG0x1A] = REG_FIELD(DEBUG0x1A, 0, 15), +}; + +/* CHGSTM_STATEs */ +#define CHGSTM_SUSPEND 0x00 +#define CHGSTM_TRICKLE_CHARGE 0x01 +#define CHGSTM_PRE_CHARGE 0x02 +#define CHGSTM_FAST_CHARGE 0x03 +#define CHGSTM_TOP_OFF 0x04 +#define CHGSTM_DONE 0x05 +#define CHGSTM_OTG 0x08 +#define CHGSTM_OTG_DONE 0x09 +#define CHGSTM_TEMPERATURE_ERROR_1 0x10 +#define CHGSTM_TEMPERATURE_ERROR_2 0x11 +#define CHGSTM_TEMPERATURE_ERROR_3 0x12 +#define CHGSTM_TEMPERATURE_ERROR_4 0x13 +#define CHGSTM_TEMPERATURE_ERROR_5 0x14 +#define CHGSTM_TEMPERATURE_ERROR_6 0x15 +#define CHGSTM_TEMPERATURE_ERROR_7 0x18 +#define CHGSTM_THERMAL_SHUT_DOWN_1 0x20 +#define CHGSTM_THERMAL_SHUT_DOWN_2 0x21 +#define CHGSTM_THERMAL_SHUT_DOWN_3 0x22 +#define CHGSTM_THERMAL_SHUT_DOWN_4 0x23 +#define CHGSTM_THERMAL_SHUT_DOWN_5 0x24 +#define CHGSTM_THERMAL_SHUT_DOWN_6 0x25 +#define CHGSTM_THERMAL_SHUT_DOWN_7 0x28 +#define CHGSTM_BATTERY_ERROR 0x40 + +/* VBAT_VSYS_STATUS */ +#define STATUS_VSYS_OV BIT(15) +#define STATUS_VSYS_SSD BIT(14) +#define STATUS_VSYS_SCP BIT(13) +#define STATUS_VSYS_UVN BIT(12) +#define STATUS_IBAT_SHORT BIT(6) +#define STATUS_VBAT_OV BIT(3) +#define STATUS_DEAD_BAT BIT(0) + +/* VBUS_VCC_STATUS */ +#define STATUS_VACP_DET BIT(12) +#define STATUS_VCC_OVP BIT(11) +#define STATUS_ILIM_VCC_MOD BIT(10) +#define STATUS_VCC_CLPS BIT(9) +#define STATUS_VCC_DET BIT(8) +#define STATUS_VBUS_OVP BIT(3) +#define STATUS_ILIM_VBUS_MOD BIT(2) +#define STATUS_VBUS_CLPS BIT(1) +#define STATUS_VBUS_DET BIT(0) + +/* Interrupt set/status definitions */ + +/* INT 0 */ +#define INT0_INT7_STATUS BIT(7) +#define INT0_INT6_STATUS BIT(6) +#define INT0_INT5_STATUS BIT(5) +#define INT0_INT4_STATUS BIT(4) +#define INT0_INT3_STATUS BIT(3) +#define INT0_INT2_STATUS BIT(2) +#define INT0_INT1_STATUS BIT(1) +#define INT0_INT0_STATUS BIT(0) +#define INT0_ALL 0xff + +/* INT 1 */ +#define VBUS_RBUV_DET BIT(15) +#define VBUS_RBUV_RES BIT(14) +#define VBUS_TH_DET BIT(9) +#define VBUS_TH_RES BIT(8) +#define VBUS_IIN_MOD BIT(6) +#define VBUS_OV_DET BIT(5) +#define VBUS_OV_RES BIT(4) +#define VBUS_CLPS_DET BIT(3) +#define VBUS_CLPS BIT(2) +#define VBUS_DET BIT(1) +#define VBUS_RES BIT(0) +#define INT1_ALL (VBUS_RBUV_DET|\ + VBUS_RBUV_RES|\ + VBUS_TH_DET |\ + VBUS_TH_RES |\ + VBUS_IIN_MOD|\ + VBUS_OV_DET |\ + VBUS_OV_RES |\ + VBUS_CLPS_DET |\ + VBUS_CLPS |\ + VBUS_DET |\ + VBUS_RES) + +/* INT 2 */ +#define VCC_RBUV_DET BIT(15) +#define VCC_RBUV_RES BIT(14) +#define VCC_TH_DET BIT(9) +#define VCC_TH_RES BIT(8) +#define VCC_IIN_MOD BIT(6) +#define VCC_OVP_DET BIT(5) +#define VCC_OVP_RES BIT(4) +#define VCC_CLPS_DET BIT(3) +#define VCC_CLPS_RES BIT(2) +#define VCC_DET BIT(1) +#define VCC_RES BIT(0) +#define INT2_ALL (VCC_RBUV_DET |\ + VCC_RBUV_RES |\ + VCC_TH_DET |\ + VCC_TH_RES |\ + VCC_IIN_MOD |\ + VCC_OVP_DET |\ + VCC_OVP_RES |\ + VCC_CLPS_DET |\ + VCC_CLPS_RES |\ + VCC_DET |\ + VCC_RES) +/* INT 3 */ +#define TH_DET BIT(15) +#define TH_RMV BIT(14) +#define TMP_OUT_DET BIT(11) +#define TMP_OUT_RES BIT(10) +#define VBAT_TH_DET BIT(9) +#define VBAT_TH_RES BIT(8) +#define IBAT_SHORT_DET BIT(7) +#define IBAT_SHORT_RES BIT(6) +#define VBAT_OV_DET BIT(5) +#define VBAT_OV_RES BIT(4) +#define BAT_ASSIST_DET BIT(3) +#define BAT_ASSIST_RES BIT(2) +#define INT3_ALL (TH_DET |\ + TH_RMV |\ + TMP_OUT_DET |\ + TMP_OUT_RES |\ + VBAT_TH_DET |\ + VBAT_TH_RES |\ + IBAT_SHORT_DET |\ + IBAT_SHORT_RES |\ + VBAT_OV_DET |\ + VBAT_OV_RES |\ + BAT_ASSIST_DET |\ + BAT_ASSIST_RES) + +/* INT 4 */ +#define VSYS_TH_DET BIT(9) +#define VSYS_TH_RES BIT(8) +#define VSYS_OV_DET BIT(5) +#define VSYS_OV_RES BIT(4) +#define VSYS_SHT_DET BIT(3) +#define VSYS_SHT_RES BIT(2) +#define VSYS_UV_DET BIT(1) +#define VSYS_UV_RES BIT(0) +#define INT4_ALL (VSYS_TH_DET |\ + VSYS_TH_RES |\ + VSYS_OV_DET |\ + VSYS_OV_RES |\ + VSYS_SHT_DET |\ + VSYS_SHT_RES |\ + VSYS_UV_DET |\ + VSYS_UV_RES) + +/* INT 5*/ +#define OTP_LOAD_DONE BIT(13) +#define PWR_ON BIT(12) +#define EXTIADP_TRNS BIT(11) +#define EXTIADP_TH_DET BIT(9) +#define EXIADP_TH_RES BIT(8) +#define BAT_MNT_DET BIT(7) +#define BAT_MNT_RES BIT(6) +#define TSD_DET BIT(5) +#define TSD_RES BIT(4) +#define CHGWDT_EXP BIT(3) +#define THERMWDT_EXP BIT(2) +#define TMP_TRNS BIT(1) +#define CHG_TRNS BIT(0) +#define INT5_ALL (OTP_LOAD_DONE |\ + PWR_ON |\ + EXTIADP_TRNS |\ + EXTIADP_TH_DET |\ + EXIADP_TH_RES |\ + BAT_MNT_DET |\ + BAT_MNT_RES |\ + TSD_DET |\ + TSD_RES |\ + CHGWDT_EXP |\ + THERMWDT_EXP |\ + TMP_TRNS |\ + CHG_TRNS) + +/* INT 6*/ +#define VBUS_UCD_PORT_DET BIT(13) +#define VBUS_UCD_UCHG_DET BIT(12) +#define VBUS_UCD_URID_RMV BIT(11) +#define VBUS_UCD_OTG_DET BIT(10) +#define VBUS_UCD_URID_MOD BIT(8) +#define VCC_UCD_PORT_DET BIT(5) +#define VCC_UCD_UCHG_DET BIT(4) +#define VCC_UCD_URID_RMV BIT(3) +#define VCC_UCD_OTG_DET BIT(2) +#define VCC_UCD_URID_MOD BIT(0) +#define INT6_ALL (VBUS_UCD_PORT_DET |\ + VBUS_UCD_UCHG_DET |\ + VBUS_UCD_URID_RMV |\ + VBUS_UCD_OTG_DET |\ + VBUS_UCD_URID_MOD |\ + VCC_UCD_PORT_DET |\ + VCC_UCD_UCHG_DET |\ + VCC_UCD_URID_RMV |\ + VCC_UCD_OTG_DET |\ + VCC_UCD_URID_MOD) + +/* INT 7 */ +#define PROCHOT_DET BIT(15) +#define PROCHOT_RES BIT(14) +#define VACP_DET BIT(11) +#define VACP_RES BIT(10) +#define VACP_TH_DET BIT(9) +#define VACP_TH_RES BIT(8) +#define IACP_TH_DET BIT(7) +#define IACP_THE_RES BIT(6) +#define THERM_TH_DET BIT(5) +#define THERM_TH_RES BIT(4) +#define IBATM_TH_DET BIT(3) +#define IBATM_TH_RES BIT(2) +#define IBATP_TH_DET BIT(1) +#define IBATP_TH_RES BIT(0) +#define INT7_ALL (PROCHOT_DET |\ + PROCHOT_RES |\ + VACP_DET |\ + VACP_RES |\ + VACP_TH_DET |\ + VACP_TH_RES |\ + IACP_TH_DET |\ + IACP_THE_RES |\ + THERM_TH_DET |\ + THERM_TH_RES |\ + IBATM_TH_DET |\ + IBATM_TH_RES |\ + IBATP_TH_DET |\ + IBATP_TH_RES) + +/* SYSTEM_CTRL_SET*/ +#define MONRST BIT(6) +#define ALMRST BIT(5) +#define CHGRST BIT(4) +#define OTPLD BIT(1) +#define ALLRST BIT(0) + +/* F_BATTEMP */ +#define ROOM 0x0 +#define HOT1 0x1 +#define HOT2 0x2 +#define HOT3 0x3 +#define COLD1 0x4 +#define COLD2 0x5 +#define TEMP_DIS 0x6 +#define BATT_OPEN 0x7 + +#endif diff --git a/drivers/power/supply/bq24190_charger.c b/drivers/power/supply/bq24190_charger.c index 453d6332d43a..4540e913057f 100644 --- a/drivers/power/supply/bq24190_charger.c +++ b/drivers/power/supply/bq24190_charger.c @@ -673,7 +673,7 @@ static int bq24190_register_reset(struct bq24190_dev_info *bdi) * { .type = "bq24190", .addr = 0x6b, .properties = pe, .irq = irq }; * struct i2c_adapter ad = { ... }; * i2c_add_adapter(&ad); - * i2c_new_device(&ad, &bi); + * i2c_new_client_device(&ad, &bi); */ if (device_property_read_bool(bdi->dev, "disable-reset")) return 0; diff --git a/drivers/power/supply/bq25890_charger.c b/drivers/power/supply/bq25890_charger.c index aebd1253dbc9..77150667e36b 100644 --- a/drivers/power/supply/bq25890_charger.c +++ b/drivers/power/supply/bq25890_charger.c @@ -32,6 +32,13 @@ enum bq25890_chip_version { BQ25896, }; +static const char *const bq25890_chip_name[] = { + "BQ25890", + "BQ25892", + "BQ25895", + "BQ25896", +}; + enum bq25890_fields { F_EN_HIZ, F_EN_ILIM, F_IILIM, /* Reg00 */ F_BHOT, F_BCOLD, F_VINDPM_OFS, /* Reg01 */ @@ -119,6 +126,7 @@ static const struct regmap_access_table bq25890_writeable_regs = { static const struct regmap_range bq25890_volatile_reg_ranges[] = { regmap_reg_range(0x00, 0x00), + regmap_reg_range(0x02, 0x02), regmap_reg_range(0x09, 0x09), regmap_reg_range(0x0b, 0x14), }; @@ -246,6 +254,7 @@ enum bq25890_table_ids { /* range tables */ TBL_ICHG, TBL_ITERM, + TBL_IILIM, TBL_VREG, TBL_BOOSTV, TBL_SYSVMIN, @@ -286,6 +295,7 @@ static const union { /* TODO: BQ25896 has max ICHG 3008 mA */ [TBL_ICHG] = { .rt = {0, 5056000, 64000} }, /* uA */ [TBL_ITERM] = { .rt = {64000, 1024000, 64000} }, /* uA */ + [TBL_IILIM] = { .rt = {50000, 3200000, 50000} }, /* uA */ [TBL_VREG] = { .rt = {3840000, 4608000, 16000} }, /* uV */ [TBL_BOOSTV] = { .rt = {4550000, 5510000, 64000} }, /* uV */ [TBL_SYSVMIN] = { .rt = {3000000, 3700000, 100000} }, /* uV */ @@ -367,18 +377,42 @@ enum bq25890_chrg_fault { CHRG_FAULT_TIMER_EXPIRED, }; +static bool bq25890_is_adc_property(enum power_supply_property psp) +{ + switch (psp) { + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + case POWER_SUPPLY_PROP_CURRENT_NOW: + return true; + + default: + return false; + } +} + +static irqreturn_t __bq25890_handle_irq(struct bq25890_device *bq); + static int bq25890_power_supply_get_property(struct power_supply *psy, enum power_supply_property psp, union power_supply_propval *val) { - int ret; struct bq25890_device *bq = power_supply_get_drvdata(psy); struct bq25890_state state; + bool do_adc_conv; + int ret; mutex_lock(&bq->lock); + /* update state in case we lost an interrupt */ + __bq25890_handle_irq(bq); state = bq->state; + do_adc_conv = !state.online && bq25890_is_adc_property(psp); + if (do_adc_conv) + bq25890_field_write(bq, F_CONV_START, 1); mutex_unlock(&bq->lock); + if (do_adc_conv) + regmap_field_read_poll_timeout(bq->rmap_fields[F_CONV_START], + ret, !ret, 25000, 1000000); + switch (psp) { case POWER_SUPPLY_PROP_STATUS: if (!state.online) @@ -395,22 +429,24 @@ static int bq25890_power_supply_get_property(struct power_supply *psy, break; + case POWER_SUPPLY_PROP_CHARGE_TYPE: + if (!state.online || state.chrg_status == STATUS_NOT_CHARGING || + state.chrg_status == STATUS_TERMINATION_DONE) + val->intval = POWER_SUPPLY_CHARGE_TYPE_NONE; + else if (state.chrg_status == STATUS_PRE_CHARGING) + val->intval = POWER_SUPPLY_CHARGE_TYPE_STANDARD; + else if (state.chrg_status == STATUS_FAST_CHARGING) + val->intval = POWER_SUPPLY_CHARGE_TYPE_FAST; + else /* unreachable */ + val->intval = POWER_SUPPLY_CHARGE_TYPE_UNKNOWN; + break; + case POWER_SUPPLY_PROP_MANUFACTURER: val->strval = BQ25890_MANUFACTURER; break; case POWER_SUPPLY_PROP_MODEL_NAME: - if (bq->chip_version == BQ25890) - val->strval = "BQ25890"; - else if (bq->chip_version == BQ25892) - val->strval = "BQ25892"; - else if (bq->chip_version == BQ25895) - val->strval = "BQ25895"; - else if (bq->chip_version == BQ25896) - val->strval = "BQ25896"; - else - val->strval = "UNKNOWN"; - + val->strval = bq25890_chip_name[bq->chip_version]; break; case POWER_SUPPLY_PROP_ONLINE: @@ -430,15 +466,6 @@ static int bq25890_power_supply_get_property(struct power_supply *psy, val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE; break; - case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT: - ret = bq25890_field_read(bq, F_ICHGR); /* read measured value */ - if (ret < 0) - return ret; - - /* converted_val = ADC_val * 50mA (table 10.3.19) */ - val->intval = ret * 50000; - break; - case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX: val->intval = bq25890_find_val(bq->init_data.ichg, TBL_ICHG); break; @@ -461,10 +488,22 @@ static int bq25890_power_supply_get_property(struct power_supply *psy, val->intval = bq25890_find_val(bq->init_data.vreg, TBL_VREG); break; + case POWER_SUPPLY_PROP_PRECHARGE_CURRENT: + val->intval = bq25890_find_val(bq->init_data.iprechg, TBL_ITERM); + break; + case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT: val->intval = bq25890_find_val(bq->init_data.iterm, TBL_ITERM); break; + case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT: + ret = bq25890_field_read(bq, F_IILIM); + if (ret < 0) + return ret; + + val->intval = bq25890_find_val(ret, TBL_IILIM); + break; + case POWER_SUPPLY_PROP_VOLTAGE_NOW: ret = bq25890_field_read(bq, F_SYSV); /* read measured value */ if (ret < 0) @@ -474,6 +513,15 @@ static int bq25890_power_supply_get_property(struct power_supply *psy, val->intval = 2304000 + ret * 20000; break; + case POWER_SUPPLY_PROP_CURRENT_NOW: + ret = bq25890_field_read(bq, F_ICHGR); /* read measured value */ + if (ret < 0) + return ret; + + /* converted_val = ADC_val * 50mA (table 10.3.19) */ + val->intval = ret * -50000; + break; + default: return -EINVAL; } @@ -513,74 +561,50 @@ static int bq25890_get_chip_state(struct bq25890_device *bq, return 0; } -static bool bq25890_state_changed(struct bq25890_device *bq, - struct bq25890_state *new_state) -{ - struct bq25890_state old_state; - - mutex_lock(&bq->lock); - old_state = bq->state; - mutex_unlock(&bq->lock); - - return (old_state.chrg_status != new_state->chrg_status || - old_state.chrg_fault != new_state->chrg_fault || - old_state.online != new_state->online || - old_state.bat_fault != new_state->bat_fault || - old_state.boost_fault != new_state->boost_fault || - old_state.vsys_status != new_state->vsys_status); -} - -static void bq25890_handle_state_change(struct bq25890_device *bq, - struct bq25890_state *new_state) +static irqreturn_t __bq25890_handle_irq(struct bq25890_device *bq) { + struct bq25890_state new_state; int ret; - struct bq25890_state old_state; - mutex_lock(&bq->lock); - old_state = bq->state; - mutex_unlock(&bq->lock); + ret = bq25890_get_chip_state(bq, &new_state); + if (ret < 0) + return IRQ_NONE; + + if (!memcmp(&bq->state, &new_state, sizeof(new_state))) + return IRQ_NONE; - if (!new_state->online) { /* power removed */ + if (!new_state.online && bq->state.online) { /* power removed */ /* disable ADC */ ret = bq25890_field_write(bq, F_CONV_START, 0); if (ret < 0) goto error; - } else if (!old_state.online) { /* power inserted */ + } else if (new_state.online && !bq->state.online) { /* power inserted */ /* enable ADC, to have control of charge current/voltage */ ret = bq25890_field_write(bq, F_CONV_START, 1); if (ret < 0) goto error; } - return; + bq->state = new_state; + power_supply_changed(bq->charger); + return IRQ_HANDLED; error: - dev_err(bq->dev, "Error communicating with the chip.\n"); + dev_err(bq->dev, "Error communicating with the chip: %pe\n", + ERR_PTR(ret)); + return IRQ_HANDLED; } static irqreturn_t bq25890_irq_handler_thread(int irq, void *private) { struct bq25890_device *bq = private; - int ret; - struct bq25890_state state; - - ret = bq25890_get_chip_state(bq, &state); - if (ret < 0) - goto handled; - - if (!bq25890_state_changed(bq, &state)) - goto handled; - - bq25890_handle_state_change(bq, &state); + irqreturn_t ret; mutex_lock(&bq->lock); - bq->state = state; + ret = __bq25890_handle_irq(bq); mutex_unlock(&bq->lock); - power_supply_changed(bq->charger); - -handled: - return IRQ_HANDLED; + return ret; } static int bq25890_chip_reset(struct bq25890_device *bq) @@ -610,7 +634,6 @@ static int bq25890_hw_init(struct bq25890_device *bq) { int ret; int i; - struct bq25890_state state; const struct { enum bq25890_fields id; @@ -651,38 +674,37 @@ static int bq25890_hw_init(struct bq25890_device *bq) } } - /* Configure ADC for continuous conversions. This does not enable it. */ - ret = bq25890_field_write(bq, F_CONV_RATE, 1); + /* Configure ADC for continuous conversions when charging */ + ret = bq25890_field_write(bq, F_CONV_RATE, !!bq->state.online); if (ret < 0) { dev_dbg(bq->dev, "Config ADC failed %d\n", ret); return ret; } - ret = bq25890_get_chip_state(bq, &state); + ret = bq25890_get_chip_state(bq, &bq->state); if (ret < 0) { dev_dbg(bq->dev, "Get state failed %d\n", ret); return ret; } - mutex_lock(&bq->lock); - bq->state = state; - mutex_unlock(&bq->lock); - return 0; } -static enum power_supply_property bq25890_power_supply_props[] = { +static const enum power_supply_property bq25890_power_supply_props[] = { POWER_SUPPLY_PROP_MANUFACTURER, POWER_SUPPLY_PROP_MODEL_NAME, POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_CHARGE_TYPE, POWER_SUPPLY_PROP_ONLINE, POWER_SUPPLY_PROP_HEALTH, - POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT, POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX, POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE, POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX, + POWER_SUPPLY_PROP_PRECHARGE_CURRENT, POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT, + POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT, POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_CURRENT_NOW, }; static char *bq25890_charger_supplied_to[] = { @@ -881,17 +903,11 @@ static int bq25890_fw_probe(struct bq25890_device *bq) static int bq25890_probe(struct i2c_client *client, const struct i2c_device_id *id) { - struct i2c_adapter *adapter = client->adapter; struct device *dev = &client->dev; struct bq25890_device *bq; int ret; int i; - if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { - dev_err(dev, "No support for SMBUS_BYTE_DATA\n"); - return -ENODEV; - } - bq = devm_kzalloc(dev, sizeof(*bq), GFP_KERNEL); if (!bq) return -ENOMEM; @@ -1004,34 +1020,34 @@ static int bq25890_suspend(struct device *dev) * If charger is removed, while in suspend, make sure ADC is diabled * since it consumes slightly more power. */ - return bq25890_field_write(bq, F_CONV_START, 0); + return bq25890_field_write(bq, F_CONV_RATE, 0); } static int bq25890_resume(struct device *dev) { int ret; - struct bq25890_state state; struct bq25890_device *bq = dev_get_drvdata(dev); - ret = bq25890_get_chip_state(bq, &state); - if (ret < 0) - return ret; - mutex_lock(&bq->lock); - bq->state = state; - mutex_unlock(&bq->lock); + + ret = bq25890_get_chip_state(bq, &bq->state); + if (ret < 0) + goto unlock; /* Re-enable ADC only if charger is plugged in. */ - if (state.online) { - ret = bq25890_field_write(bq, F_CONV_START, 1); + if (bq->state.online) { + ret = bq25890_field_write(bq, F_CONV_RATE, 1); if (ret < 0) - return ret; + goto unlock; } /* signal userspace, maybe state changed while suspended */ power_supply_changed(bq->charger); - return 0; +unlock: + mutex_unlock(&bq->lock); + + return ret; } #endif diff --git a/drivers/power/supply/charger-manager.c b/drivers/power/supply/charger-manager.c index a21e1a2673f8..2ef53dc1f2fb 100644 --- a/drivers/power/supply/charger-manager.c +++ b/drivers/power/supply/charger-manager.c @@ -1422,7 +1422,9 @@ static int charger_manager_prepare_sysfs(struct charger_manager *cm) } static int cm_init_thermal_data(struct charger_manager *cm, - struct power_supply *fuel_gauge) + struct power_supply *fuel_gauge, + enum power_supply_property *properties, + size_t *num_properties) { struct charger_desc *desc = cm->desc; union power_supply_propval val; @@ -1433,9 +1435,8 @@ static int cm_init_thermal_data(struct charger_manager *cm, POWER_SUPPLY_PROP_TEMP, &val); if (!ret) { - cm->charger_psy_desc.properties[cm->charger_psy_desc.num_properties] = - POWER_SUPPLY_PROP_TEMP; - cm->charger_psy_desc.num_properties++; + properties[*num_properties] = POWER_SUPPLY_PROP_TEMP; + (*num_properties)++; cm->desc->measure_battery_temp = true; } #ifdef CONFIG_THERMAL @@ -1446,9 +1447,8 @@ static int cm_init_thermal_data(struct charger_manager *cm, return PTR_ERR(cm->tzd_batt); /* Use external thermometer */ - cm->charger_psy_desc.properties[cm->charger_psy_desc.num_properties] = - POWER_SUPPLY_PROP_TEMP_AMBIENT; - cm->charger_psy_desc.num_properties++; + properties[*num_properties] = POWER_SUPPLY_PROP_TEMP_AMBIENT; + (*num_properties)++; cm->desc->measure_battery_temp = true; ret = 0; } @@ -1621,6 +1621,8 @@ static int charger_manager_probe(struct platform_device *pdev) int j = 0; union power_supply_propval val; struct power_supply *fuel_gauge; + enum power_supply_property *properties; + size_t num_properties; struct power_supply_config psy_cfg = {}; if (IS_ERR(desc)) { @@ -1717,18 +1719,17 @@ static int charger_manager_probe(struct platform_device *pdev) cm->charger_psy_desc.name = cm->psy_name_buf; /* Allocate for psy properties because they may vary */ - cm->charger_psy_desc.properties = - devm_kcalloc(&pdev->dev, + properties = devm_kcalloc(&pdev->dev, ARRAY_SIZE(default_charger_props) + NUM_CHARGER_PSY_OPTIONAL, - sizeof(enum power_supply_property), GFP_KERNEL); - if (!cm->charger_psy_desc.properties) + sizeof(*properties), GFP_KERNEL); + if (!properties) return -ENOMEM; - memcpy(cm->charger_psy_desc.properties, default_charger_props, + memcpy(properties, default_charger_props, sizeof(enum power_supply_property) * ARRAY_SIZE(default_charger_props)); - cm->charger_psy_desc.num_properties = psy_default.num_properties; + num_properties = ARRAY_SIZE(default_charger_props); /* Find which optional psy-properties are available */ fuel_gauge = power_supply_get_by_name(desc->psy_fuel_gauge); @@ -1739,25 +1740,28 @@ static int charger_manager_probe(struct platform_device *pdev) } if (!power_supply_get_property(fuel_gauge, POWER_SUPPLY_PROP_CHARGE_NOW, &val)) { - cm->charger_psy_desc.properties[cm->charger_psy_desc.num_properties] = + properties[num_properties] = POWER_SUPPLY_PROP_CHARGE_NOW; - cm->charger_psy_desc.num_properties++; + num_properties++; } if (!power_supply_get_property(fuel_gauge, POWER_SUPPLY_PROP_CURRENT_NOW, &val)) { - cm->charger_psy_desc.properties[cm->charger_psy_desc.num_properties] = + properties[num_properties] = POWER_SUPPLY_PROP_CURRENT_NOW; - cm->charger_psy_desc.num_properties++; + num_properties++; } - ret = cm_init_thermal_data(cm, fuel_gauge); + ret = cm_init_thermal_data(cm, fuel_gauge, properties, &num_properties); if (ret) { dev_err(&pdev->dev, "Failed to initialize thermal data\n"); cm->desc->measure_battery_temp = false; } power_supply_put(fuel_gauge); + cm->charger_psy_desc.properties = properties; + cm->charger_psy_desc.num_properties = num_properties; + INIT_DELAYED_WORK(&cm->fullbatt_vchk_work, fullbatt_vchk); /* Register sysfs entry for charger(regulator) */ diff --git a/drivers/power/supply/cw2015_battery.c b/drivers/power/supply/cw2015_battery.c new file mode 100644 index 000000000000..0146f1bfc29b --- /dev/null +++ b/drivers/power/supply/cw2015_battery.c @@ -0,0 +1,750 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Fuel gauge driver for CellWise 2013 / 2015 + * + * Copyright (C) 2012, RockChip + * Copyright (C) 2020, Tobias Schramm + * + * Authors: xuhuicong <xhc@rock-chips.com> + * Authors: Tobias Schramm <t.schramm@manjaro.org> + */ + +#include <linux/bits.h> +#include <linux/delay.h> +#include <linux/i2c.h> +#include <linux/gfp.h> +#include <linux/gpio/consumer.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/power_supply.h> +#include <linux/property.h> +#include <linux/regmap.h> +#include <linux/time.h> +#include <linux/workqueue.h> + +#define CW2015_SIZE_BATINFO 64 + +#define CW2015_RESET_TRIES 5 + +#define CW2015_REG_VERSION 0x00 +#define CW2015_REG_VCELL 0x02 +#define CW2015_REG_SOC 0x04 +#define CW2015_REG_RRT_ALERT 0x06 +#define CW2015_REG_CONFIG 0x08 +#define CW2015_REG_MODE 0x0A +#define CW2015_REG_BATINFO 0x10 + +#define CW2015_MODE_SLEEP_MASK GENMASK(7, 6) +#define CW2015_MODE_SLEEP (0x03 << 6) +#define CW2015_MODE_NORMAL (0x00 << 6) +#define CW2015_MODE_QUICK_START (0x03 << 4) +#define CW2015_MODE_RESTART (0x0f << 0) + +#define CW2015_CONFIG_UPDATE_FLG (0x01 << 1) +#define CW2015_ATHD(x) ((x) << 3) +#define CW2015_MASK_ATHD GENMASK(7, 3) +#define CW2015_MASK_SOC GENMASK(12, 0) + +/* reset gauge of no valid state of charge could be polled for 40s */ +#define CW2015_BAT_SOC_ERROR_MS (40 * MSEC_PER_SEC) +/* reset gauge if state of charge stuck for half an hour during charging */ +#define CW2015_BAT_CHARGING_STUCK_MS (1800 * MSEC_PER_SEC) + +/* poll interval from CellWise GPL Android driver example */ +#define CW2015_DEFAULT_POLL_INTERVAL_MS 8000 + +#define CW2015_AVERAGING_SAMPLES 3 + +struct cw_battery { + struct device *dev; + struct workqueue_struct *battery_workqueue; + struct delayed_work battery_delay_work; + struct regmap *regmap; + struct power_supply *rk_bat; + struct power_supply_battery_info battery; + u8 *bat_profile; + + bool charger_attached; + bool battery_changed; + + int soc; + int voltage_mv; + int status; + int time_to_empty; + int charge_count; + + u32 poll_interval_ms; + u8 alert_level; + + unsigned int read_errors; + unsigned int charge_stuck_cnt; +}; + +static int cw_read_word(struct cw_battery *cw_bat, u8 reg, u16 *val) +{ + __be16 value; + int ret; + + ret = regmap_bulk_read(cw_bat->regmap, reg, &value, sizeof(value)); + if (ret) + return ret; + + *val = be16_to_cpu(value); + return 0; +} + +static int cw_update_profile(struct cw_battery *cw_bat) +{ + int ret; + unsigned int reg_val; + u8 reset_val; + + /* make sure gauge is not in sleep mode */ + ret = regmap_read(cw_bat->regmap, CW2015_REG_MODE, ®_val); + if (ret) + return ret; + + reset_val = reg_val; + if ((reg_val & CW2015_MODE_SLEEP_MASK) == CW2015_MODE_SLEEP) { + dev_err(cw_bat->dev, + "Gauge is in sleep mode, can't update battery info\n"); + return -EINVAL; + } + + /* write new battery info */ + ret = regmap_raw_write(cw_bat->regmap, CW2015_REG_BATINFO, + cw_bat->bat_profile, + CW2015_SIZE_BATINFO); + if (ret) + return ret; + + /* set config update flag */ + reg_val |= CW2015_CONFIG_UPDATE_FLG; + reg_val &= ~CW2015_MASK_ATHD; + reg_val |= CW2015_ATHD(cw_bat->alert_level); + ret = regmap_write(cw_bat->regmap, CW2015_REG_CONFIG, reg_val); + if (ret) + return ret; + + /* reset gauge to apply new battery profile */ + reset_val &= ~CW2015_MODE_RESTART; + reg_val = reset_val | CW2015_MODE_RESTART; + ret = regmap_write(cw_bat->regmap, CW2015_REG_MODE, reg_val); + if (ret) + return ret; + + /* wait for gauge to reset */ + msleep(20); + + /* clear reset flag */ + ret = regmap_write(cw_bat->regmap, CW2015_REG_MODE, reset_val); + if (ret) + return ret; + + /* wait for gauge to become ready */ + ret = regmap_read_poll_timeout(cw_bat->regmap, CW2015_REG_SOC, + reg_val, reg_val <= 100, + 10 * USEC_PER_MSEC, 10 * USEC_PER_SEC); + if (ret) + dev_err(cw_bat->dev, + "Gauge did not become ready after profile upload\n"); + else + dev_dbg(cw_bat->dev, "Battery profile updated\n"); + + return ret; +} + +static int cw_init(struct cw_battery *cw_bat) +{ + int ret; + unsigned int reg_val = CW2015_MODE_SLEEP; + + if ((reg_val & CW2015_MODE_SLEEP_MASK) == CW2015_MODE_SLEEP) { + reg_val = CW2015_MODE_NORMAL; + ret = regmap_write(cw_bat->regmap, CW2015_REG_MODE, reg_val); + if (ret) + return ret; + } + + ret = regmap_read(cw_bat->regmap, CW2015_REG_CONFIG, ®_val); + if (ret) + return ret; + + if ((reg_val & CW2015_MASK_ATHD) != CW2015_ATHD(cw_bat->alert_level)) { + dev_dbg(cw_bat->dev, "Setting new alert level\n"); + reg_val &= ~CW2015_MASK_ATHD; + reg_val |= ~CW2015_ATHD(cw_bat->alert_level); + ret = regmap_write(cw_bat->regmap, CW2015_REG_CONFIG, reg_val); + if (ret) + return ret; + } + + ret = regmap_read(cw_bat->regmap, CW2015_REG_CONFIG, ®_val); + if (ret) + return ret; + + if (!(reg_val & CW2015_CONFIG_UPDATE_FLG)) { + dev_dbg(cw_bat->dev, + "Battery profile not present, uploading battery profile\n"); + if (cw_bat->bat_profile) { + ret = cw_update_profile(cw_bat); + if (ret) { + dev_err(cw_bat->dev, + "Failed to upload battery profile\n"); + return ret; + } + } else { + dev_warn(cw_bat->dev, + "No profile specified, continuing without profile\n"); + } + } else if (cw_bat->bat_profile) { + u8 bat_info[CW2015_SIZE_BATINFO]; + + ret = regmap_raw_read(cw_bat->regmap, CW2015_REG_BATINFO, + bat_info, CW2015_SIZE_BATINFO); + if (ret) { + dev_err(cw_bat->dev, + "Failed to read stored battery profile\n"); + return ret; + } + + if (memcmp(bat_info, cw_bat->bat_profile, CW2015_SIZE_BATINFO)) { + dev_warn(cw_bat->dev, "Replacing stored battery profile\n"); + ret = cw_update_profile(cw_bat); + if (ret) + return ret; + } + } else { + dev_warn(cw_bat->dev, + "Can't check current battery profile, no profile provided\n"); + } + + dev_dbg(cw_bat->dev, "Battery profile configured\n"); + return 0; +} + +static int cw_power_on_reset(struct cw_battery *cw_bat) +{ + int ret; + unsigned char reset_val; + + reset_val = CW2015_MODE_SLEEP; + ret = regmap_write(cw_bat->regmap, CW2015_REG_MODE, reset_val); + if (ret) + return ret; + + /* wait for gauge to enter sleep */ + msleep(20); + + reset_val = CW2015_MODE_NORMAL; + ret = regmap_write(cw_bat->regmap, CW2015_REG_MODE, reset_val); + if (ret) + return ret; + + ret = cw_init(cw_bat); + if (ret) + return ret; + return 0; +} + +#define HYSTERESIS(current, previous, up, down) \ + (((current) < (previous) + (up)) && ((current) > (previous) - (down))) + +static int cw_get_soc(struct cw_battery *cw_bat) +{ + unsigned int soc; + int ret; + + ret = regmap_read(cw_bat->regmap, CW2015_REG_SOC, &soc); + if (ret) + return ret; + + if (soc > 100) { + int max_error_cycles = + CW2015_BAT_SOC_ERROR_MS / cw_bat->poll_interval_ms; + + dev_err(cw_bat->dev, "Invalid SoC %d%%\n", soc); + cw_bat->read_errors++; + if (cw_bat->read_errors > max_error_cycles) { + dev_warn(cw_bat->dev, + "Too many invalid SoC reports, resetting gauge\n"); + cw_power_on_reset(cw_bat); + cw_bat->read_errors = 0; + } + return cw_bat->soc; + } + cw_bat->read_errors = 0; + + /* Reset gauge if stuck while charging */ + if (cw_bat->status == POWER_SUPPLY_STATUS_CHARGING && soc == cw_bat->soc) { + int max_stuck_cycles = + CW2015_BAT_CHARGING_STUCK_MS / cw_bat->poll_interval_ms; + + cw_bat->charge_stuck_cnt++; + if (cw_bat->charge_stuck_cnt > max_stuck_cycles) { + dev_warn(cw_bat->dev, + "SoC stuck @%u%%, resetting gauge\n", soc); + cw_power_on_reset(cw_bat); + cw_bat->charge_stuck_cnt = 0; + } + } else { + cw_bat->charge_stuck_cnt = 0; + } + + /* Ignore voltage dips during charge */ + if (cw_bat->charger_attached && HYSTERESIS(soc, cw_bat->soc, 0, 3)) + soc = cw_bat->soc; + + /* Ignore voltage spikes during discharge */ + if (!cw_bat->charger_attached && HYSTERESIS(soc, cw_bat->soc, 3, 0)) + soc = cw_bat->soc; + + return soc; +} + +static int cw_get_voltage(struct cw_battery *cw_bat) +{ + int ret, i, voltage_mv; + u16 reg_val; + u32 avg = 0; + + for (i = 0; i < CW2015_AVERAGING_SAMPLES; i++) { + ret = cw_read_word(cw_bat, CW2015_REG_VCELL, ®_val); + if (ret) + return ret; + + avg += reg_val; + } + avg /= CW2015_AVERAGING_SAMPLES; + + /* + * 305 uV per ADC step + * Use 312 / 1024 as efficient approximation of 305 / 1000 + * Negligible error of 0.1% + */ + voltage_mv = avg * 312 / 1024; + + dev_dbg(cw_bat->dev, "Read voltage: %d mV, raw=0x%04x\n", + voltage_mv, reg_val); + return voltage_mv; +} + +static int cw_get_time_to_empty(struct cw_battery *cw_bat) +{ + int ret; + u16 value16; + + ret = cw_read_word(cw_bat, CW2015_REG_RRT_ALERT, &value16); + if (ret) + return ret; + + return value16 & CW2015_MASK_SOC; +} + +static void cw_update_charge_status(struct cw_battery *cw_bat) +{ + int ret; + + ret = power_supply_am_i_supplied(cw_bat->rk_bat); + if (ret < 0) { + dev_warn(cw_bat->dev, "Failed to get supply state: %d\n", ret); + } else { + bool charger_attached; + + charger_attached = !!ret; + if (cw_bat->charger_attached != charger_attached) { + cw_bat->battery_changed = true; + if (charger_attached) + cw_bat->charge_count++; + } + cw_bat->charger_attached = charger_attached; + } +} + +static void cw_update_soc(struct cw_battery *cw_bat) +{ + int soc; + + soc = cw_get_soc(cw_bat); + if (soc < 0) + dev_err(cw_bat->dev, "Failed to get SoC from gauge: %d\n", soc); + else if (cw_bat->soc != soc) { + cw_bat->soc = soc; + cw_bat->battery_changed = true; + } +} + +static void cw_update_voltage(struct cw_battery *cw_bat) +{ + int voltage_mv; + + voltage_mv = cw_get_voltage(cw_bat); + if (voltage_mv < 0) + dev_err(cw_bat->dev, "Failed to get voltage from gauge: %d\n", + voltage_mv); + else + cw_bat->voltage_mv = voltage_mv; +} + +static void cw_update_status(struct cw_battery *cw_bat) +{ + int status = POWER_SUPPLY_STATUS_DISCHARGING; + + if (cw_bat->charger_attached) { + if (cw_bat->soc >= 100) + status = POWER_SUPPLY_STATUS_FULL; + else + status = POWER_SUPPLY_STATUS_CHARGING; + } + + if (cw_bat->status != status) + cw_bat->battery_changed = true; + cw_bat->status = status; +} + +static void cw_update_time_to_empty(struct cw_battery *cw_bat) +{ + int time_to_empty; + + time_to_empty = cw_get_time_to_empty(cw_bat); + if (time_to_empty < 0) + dev_err(cw_bat->dev, "Failed to get time to empty from gauge: %d\n", + time_to_empty); + else if (cw_bat->time_to_empty != time_to_empty) { + cw_bat->time_to_empty = time_to_empty; + cw_bat->battery_changed = true; + } +} + +static void cw_bat_work(struct work_struct *work) +{ + struct delayed_work *delay_work; + struct cw_battery *cw_bat; + int ret; + unsigned int reg_val; + + delay_work = to_delayed_work(work); + cw_bat = container_of(delay_work, struct cw_battery, battery_delay_work); + ret = regmap_read(cw_bat->regmap, CW2015_REG_MODE, ®_val); + if (ret) { + dev_err(cw_bat->dev, "Failed to read mode from gauge: %d\n", ret); + } else { + if ((reg_val & CW2015_MODE_SLEEP_MASK) == CW2015_MODE_SLEEP) { + int i; + + for (i = 0; i < CW2015_RESET_TRIES; i++) { + if (!cw_power_on_reset(cw_bat)) + break; + } + } + cw_update_soc(cw_bat); + cw_update_voltage(cw_bat); + cw_update_charge_status(cw_bat); + cw_update_status(cw_bat); + cw_update_time_to_empty(cw_bat); + } + dev_dbg(cw_bat->dev, "charger_attached = %d\n", cw_bat->charger_attached); + dev_dbg(cw_bat->dev, "status = %d\n", cw_bat->status); + dev_dbg(cw_bat->dev, "soc = %d%%\n", cw_bat->soc); + dev_dbg(cw_bat->dev, "voltage = %dmV\n", cw_bat->voltage_mv); + + if (cw_bat->battery_changed) + power_supply_changed(cw_bat->rk_bat); + cw_bat->battery_changed = false; + + queue_delayed_work(cw_bat->battery_workqueue, + &cw_bat->battery_delay_work, + msecs_to_jiffies(cw_bat->poll_interval_ms)); +} + +static bool cw_battery_valid_time_to_empty(struct cw_battery *cw_bat) +{ + return cw_bat->time_to_empty > 0 && + cw_bat->time_to_empty < CW2015_MASK_SOC && + cw_bat->status == POWER_SUPPLY_STATUS_DISCHARGING; +} + +static int cw_battery_get_property(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct cw_battery *cw_bat; + + cw_bat = power_supply_get_drvdata(psy); + switch (psp) { + case POWER_SUPPLY_PROP_CAPACITY: + val->intval = cw_bat->soc; + break; + + case POWER_SUPPLY_PROP_STATUS: + val->intval = cw_bat->status; + break; + + case POWER_SUPPLY_PROP_PRESENT: + val->intval = !!cw_bat->voltage_mv; + break; + + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + val->intval = cw_bat->voltage_mv * 1000; + break; + + case POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW: + if (cw_battery_valid_time_to_empty(cw_bat)) + val->intval = cw_bat->time_to_empty; + else + val->intval = 0; + break; + + case POWER_SUPPLY_PROP_TECHNOLOGY: + val->intval = POWER_SUPPLY_TECHNOLOGY_LION; + break; + + case POWER_SUPPLY_PROP_CHARGE_COUNTER: + val->intval = cw_bat->charge_count; + break; + + case POWER_SUPPLY_PROP_CHARGE_FULL: + case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN: + if (cw_bat->battery.charge_full_design_uah > 0) + val->intval = cw_bat->battery.charge_full_design_uah; + else + val->intval = 0; + break; + + case POWER_SUPPLY_PROP_CURRENT_NOW: + if (cw_battery_valid_time_to_empty(cw_bat) && + cw_bat->battery.charge_full_design_uah > 0) { + /* calculate remaining capacity */ + val->intval = cw_bat->battery.charge_full_design_uah; + val->intval = val->intval * cw_bat->soc / 100; + + /* estimate current based on time to empty */ + val->intval = 60 * val->intval / cw_bat->time_to_empty; + } else { + val->intval = 0; + } + + break; + + default: + break; + } + return 0; +} + +static enum power_supply_property cw_battery_properties[] = { + POWER_SUPPLY_PROP_CAPACITY, + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_PRESENT, + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW, + POWER_SUPPLY_PROP_TECHNOLOGY, + POWER_SUPPLY_PROP_CHARGE_COUNTER, + POWER_SUPPLY_PROP_CHARGE_FULL, + POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, + POWER_SUPPLY_PROP_CURRENT_NOW, +}; + +static const struct power_supply_desc cw2015_bat_desc = { + .name = "cw2015-battery", + .type = POWER_SUPPLY_TYPE_BATTERY, + .properties = cw_battery_properties, + .num_properties = ARRAY_SIZE(cw_battery_properties), + .get_property = cw_battery_get_property, +}; + +static int cw2015_parse_properties(struct cw_battery *cw_bat) +{ + struct device *dev = cw_bat->dev; + int length; + int ret; + + length = device_property_count_u8(dev, "cellwise,battery-profile"); + if (length < 0) { + dev_warn(cw_bat->dev, + "No battery-profile found, using current flash contents\n"); + } else if (length != CW2015_SIZE_BATINFO) { + dev_err(cw_bat->dev, "battery-profile must be %d bytes\n", + CW2015_SIZE_BATINFO); + return -EINVAL; + } else { + cw_bat->bat_profile = devm_kzalloc(dev, length, GFP_KERNEL); + if (!cw_bat->bat_profile) + return -ENOMEM; + + ret = device_property_read_u8_array(dev, + "cellwise,battery-profile", + cw_bat->bat_profile, + length); + if (ret) + return ret; + } + + ret = device_property_read_u32(dev, "cellwise,monitor-interval-ms", + &cw_bat->poll_interval_ms); + if (ret) { + dev_dbg(cw_bat->dev, "Using default poll interval\n"); + cw_bat->poll_interval_ms = CW2015_DEFAULT_POLL_INTERVAL_MS; + } + + return 0; +} + +static const struct regmap_range regmap_ranges_rd_yes[] = { + regmap_reg_range(CW2015_REG_VERSION, CW2015_REG_VERSION), + regmap_reg_range(CW2015_REG_VCELL, CW2015_REG_CONFIG), + regmap_reg_range(CW2015_REG_MODE, CW2015_REG_MODE), + regmap_reg_range(CW2015_REG_BATINFO, + CW2015_REG_BATINFO + CW2015_SIZE_BATINFO - 1), +}; + +static const struct regmap_access_table regmap_rd_table = { + .yes_ranges = regmap_ranges_rd_yes, + .n_yes_ranges = 4, +}; + +static const struct regmap_range regmap_ranges_wr_yes[] = { + regmap_reg_range(CW2015_REG_RRT_ALERT, CW2015_REG_CONFIG), + regmap_reg_range(CW2015_REG_MODE, CW2015_REG_MODE), + regmap_reg_range(CW2015_REG_BATINFO, + CW2015_REG_BATINFO + CW2015_SIZE_BATINFO - 1), +}; + +static const struct regmap_access_table regmap_wr_table = { + .yes_ranges = regmap_ranges_wr_yes, + .n_yes_ranges = 3, +}; + +static const struct regmap_range regmap_ranges_vol_yes[] = { + regmap_reg_range(CW2015_REG_VCELL, CW2015_REG_SOC + 1), +}; + +static const struct regmap_access_table regmap_vol_table = { + .yes_ranges = regmap_ranges_vol_yes, + .n_yes_ranges = 1, +}; + +static const struct regmap_config cw2015_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .rd_table = ®map_rd_table, + .wr_table = ®map_wr_table, + .volatile_table = ®map_vol_table, + .max_register = CW2015_REG_BATINFO + CW2015_SIZE_BATINFO - 1, +}; + +static int cw_bat_probe(struct i2c_client *client) +{ + int ret; + struct cw_battery *cw_bat; + struct power_supply_config psy_cfg = { 0 }; + + cw_bat = devm_kzalloc(&client->dev, sizeof(*cw_bat), GFP_KERNEL); + if (!cw_bat) + return -ENOMEM; + + i2c_set_clientdata(client, cw_bat); + cw_bat->dev = &client->dev; + cw_bat->soc = 1; + + ret = cw2015_parse_properties(cw_bat); + if (ret) { + dev_err(cw_bat->dev, "Failed to parse cw2015 properties\n"); + return ret; + } + + cw_bat->regmap = devm_regmap_init_i2c(client, &cw2015_regmap_config); + if (IS_ERR(cw_bat->regmap)) { + dev_err(cw_bat->dev, "Failed to allocate regmap: %ld\n", + PTR_ERR(cw_bat->regmap)); + return PTR_ERR(cw_bat->regmap); + } + + ret = cw_init(cw_bat); + if (ret) { + dev_err(cw_bat->dev, "Init failed: %d\n", ret); + return ret; + } + + psy_cfg.drv_data = cw_bat; + psy_cfg.fwnode = dev_fwnode(cw_bat->dev); + + cw_bat->rk_bat = devm_power_supply_register(&client->dev, + &cw2015_bat_desc, + &psy_cfg); + if (IS_ERR(cw_bat->rk_bat)) { + dev_err(cw_bat->dev, "Failed to register power supply\n"); + return PTR_ERR(cw_bat->rk_bat); + } + + ret = power_supply_get_battery_info(cw_bat->rk_bat, &cw_bat->battery); + if (ret) { + dev_warn(cw_bat->dev, + "No monitored battery, some properties will be missing\n"); + } + + cw_bat->battery_workqueue = create_singlethread_workqueue("rk_battery"); + INIT_DELAYED_WORK(&cw_bat->battery_delay_work, cw_bat_work); + queue_delayed_work(cw_bat->battery_workqueue, + &cw_bat->battery_delay_work, msecs_to_jiffies(10)); + return 0; +} + +static int __maybe_unused cw_bat_suspend(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct cw_battery *cw_bat = i2c_get_clientdata(client); + + cancel_delayed_work_sync(&cw_bat->battery_delay_work); + return 0; +} + +static int __maybe_unused cw_bat_resume(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct cw_battery *cw_bat = i2c_get_clientdata(client); + + queue_delayed_work(cw_bat->battery_workqueue, + &cw_bat->battery_delay_work, 0); + return 0; +} + +static SIMPLE_DEV_PM_OPS(cw_bat_pm_ops, cw_bat_suspend, cw_bat_resume); + +static int cw_bat_remove(struct i2c_client *client) +{ + struct cw_battery *cw_bat = i2c_get_clientdata(client); + + cancel_delayed_work_sync(&cw_bat->battery_delay_work); + power_supply_put_battery_info(cw_bat->rk_bat, &cw_bat->battery); + return 0; +} + +static const struct i2c_device_id cw_bat_id_table[] = { + { "cw2015", 0 }, + { } +}; + +static const struct of_device_id cw2015_of_match[] = { + { .compatible = "cellwise,cw2015" }, + { } +}; +MODULE_DEVICE_TABLE(of, cw2015_of_match); + +static struct i2c_driver cw_bat_driver = { + .driver = { + .name = "cw2015", + .of_match_table = cw2015_of_match, + .pm = &cw_bat_pm_ops, + }, + .probe_new = cw_bat_probe, + .remove = cw_bat_remove, + .id_table = cw_bat_id_table, +}; + +module_i2c_driver(cw_bat_driver); + +MODULE_AUTHOR("xhc<xhc@rock-chips.com>"); +MODULE_AUTHOR("Tobias Schramm <t.schramm@manjaro.org>"); +MODULE_DESCRIPTION("cw2015/cw2013 battery driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/power/supply/generic-adc-battery.c b/drivers/power/supply/generic-adc-battery.c index bc462d1ec963..caa829738ef7 100644 --- a/drivers/power/supply/generic-adc-battery.c +++ b/drivers/power/supply/generic-adc-battery.c @@ -241,6 +241,7 @@ static int gab_probe(struct platform_device *pdev) struct power_supply_desc *psy_desc; struct power_supply_config psy_cfg = {}; struct gab_platform_data *pdata = pdev->dev.platform_data; + enum power_supply_property *properties; int ret = 0; int chan; int index = ARRAY_SIZE(gab_props); @@ -268,16 +269,16 @@ static int gab_probe(struct platform_device *pdev) * copying the static properties and allocating extra memory for holding * the extra configurable properties received from platform data. */ - psy_desc->properties = kcalloc(ARRAY_SIZE(gab_props) + - ARRAY_SIZE(gab_chan_name), - sizeof(*psy_desc->properties), - GFP_KERNEL); - if (!psy_desc->properties) { + properties = kcalloc(ARRAY_SIZE(gab_props) + + ARRAY_SIZE(gab_chan_name), + sizeof(*properties), + GFP_KERNEL); + if (!properties) { ret = -ENOMEM; goto first_mem_fail; } - memcpy(psy_desc->properties, gab_props, sizeof(gab_props)); + memcpy(properties, gab_props, sizeof(gab_props)); /* * getting channel from iio and copying the battery properties @@ -294,13 +295,11 @@ static int gab_probe(struct platform_device *pdev) int index2; for (index2 = 0; index2 < index; index2++) { - if (psy_desc->properties[index2] == - gab_dyn_props[chan]) + if (properties[index2] == gab_dyn_props[chan]) break; /* already known */ } if (index2 == index) /* really new */ - psy_desc->properties[index++] = - gab_dyn_props[chan]; + properties[index++] = gab_dyn_props[chan]; any = true; } } @@ -317,6 +316,7 @@ static int gab_probe(struct platform_device *pdev) * as come channels may be not be supported by the device.So * we need to take care of that. */ + psy_desc->properties = properties; psy_desc->num_properties = index; adc_bat->psy = power_supply_register(&pdev->dev, psy_desc, &psy_cfg); @@ -358,7 +358,7 @@ err_reg_fail: iio_channel_release(adc_bat->channel[chan]); } second_mem_fail: - kfree(psy_desc->properties); + kfree(properties); first_mem_fail: return ret; } diff --git a/drivers/power/supply/lp8788-charger.c b/drivers/power/supply/lp8788-charger.c index 84a206f42a8e..e7931ffb7151 100644 --- a/drivers/power/supply/lp8788-charger.c +++ b/drivers/power/supply/lp8788-charger.c @@ -572,27 +572,14 @@ static void lp8788_setup_adc_channel(struct device *dev, return; /* ADC channel for battery voltage */ - chan = iio_channel_get(dev, pdata->adc_vbatt); + chan = devm_iio_channel_get(dev, pdata->adc_vbatt); pchg->chan[LP8788_VBATT] = IS_ERR(chan) ? NULL : chan; /* ADC channel for battery temperature */ - chan = iio_channel_get(dev, pdata->adc_batt_temp); + chan = devm_iio_channel_get(dev, pdata->adc_batt_temp); pchg->chan[LP8788_BATT_TEMP] = IS_ERR(chan) ? NULL : chan; } -static void lp8788_release_adc_channel(struct lp8788_charger *pchg) -{ - int i; - - for (i = 0; i < LP8788_NUM_CHG_ADC; i++) { - if (!pchg->chan[i]) - continue; - - iio_channel_release(pchg->chan[i]); - pchg->chan[i] = NULL; - } -} - static ssize_t lp8788_show_charger_status(struct device *dev, struct device_attribute *attr, char *buf) { @@ -735,7 +722,6 @@ static int lp8788_charger_remove(struct platform_device *pdev) flush_work(&pchg->charger_work); lp8788_irq_unregister(pdev, pchg); lp8788_psy_unregister(pchg); - lp8788_release_adc_channel(pchg); return 0; } diff --git a/drivers/power/supply/max14577_charger.c b/drivers/power/supply/max14577_charger.c index 8a59feac6468..dcedae18d7be 100644 --- a/drivers/power/supply/max14577_charger.c +++ b/drivers/power/supply/max14577_charger.c @@ -623,9 +623,19 @@ static const struct platform_device_id max14577_charger_id[] = { }; MODULE_DEVICE_TABLE(platform, max14577_charger_id); +static const struct of_device_id of_max14577_charger_dt_match[] = { + { .compatible = "maxim,max14577-charger", + .data = (void *)MAXIM_DEVICE_TYPE_MAX14577, }, + { .compatible = "maxim,max77836-charger", + .data = (void *)MAXIM_DEVICE_TYPE_MAX77836, }, + { }, +}; +MODULE_DEVICE_TABLE(of, of_max14577_charger_dt_match); + static struct platform_driver max14577_charger_driver = { .driver = { .name = "max14577-charger", + .of_match_table = of_max14577_charger_dt_match, }, .probe = max14577_charger_probe, .remove = max14577_charger_remove, diff --git a/drivers/power/supply/max14656_charger_detector.c b/drivers/power/supply/max14656_charger_detector.c index 3bbb8b4c8ae7..137f9fafce8c 100644 --- a/drivers/power/supply/max14656_charger_detector.c +++ b/drivers/power/supply/max14656_charger_detector.c @@ -139,10 +139,9 @@ static void max14656_irq_worker(struct work_struct *work) u8 buf[REG_TOTAL_NUM]; u8 chg_type; - int ret = 0; - ret = max14656_read_block_reg(chip->client, MAX14656_DEVICE_ID, - REG_TOTAL_NUM, buf); + max14656_read_block_reg(chip->client, MAX14656_DEVICE_ID, + REG_TOTAL_NUM, buf); if ((buf[MAX14656_STATUS_1] & STATUS1_VB_VALID_MASK) && (buf[MAX14656_STATUS_1] & STATUS1_CHG_TYPE_MASK)) { diff --git a/drivers/power/supply/max17040_battery.c b/drivers/power/supply/max17040_battery.c index 8a1f0ee493aa..48aa44665e2f 100644 --- a/drivers/power/supply/max17040_battery.c +++ b/drivers/power/supply/max17040_battery.c @@ -126,7 +126,7 @@ static void max17040_get_vcell(struct i2c_client *client) vcell = max17040_read_reg(client, MAX17040_VCELL); - chip->vcell = vcell; + chip->vcell = (vcell >> 4) * 1250; } static void max17040_get_soc(struct i2c_client *client) diff --git a/drivers/power/supply/max17042_battery.c b/drivers/power/supply/max17042_battery.c index 69ec4295d55d..f284547913d6 100644 --- a/drivers/power/supply/max17042_battery.c +++ b/drivers/power/supply/max17042_battery.c @@ -87,6 +87,7 @@ static enum power_supply_property max17042_battery_props[] = { POWER_SUPPLY_PROP_SCOPE, POWER_SUPPLY_PROP_CURRENT_NOW, POWER_SUPPLY_PROP_CURRENT_AVG, + POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW, }; static int max17042_get_temperature(struct max17042_chip *chip, int *temp) @@ -411,6 +412,13 @@ static int max17042_get_property(struct power_supply *psy, return -EINVAL; } break; + case POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW: + ret = regmap_read(map, MAX17042_TTE, &data); + if (ret < 0) + return ret; + + val->intval = data * 5625 / 1000; + break; default: return -EINVAL; } diff --git a/drivers/power/supply/olpc_battery.c b/drivers/power/supply/olpc_battery.c index ad0e9e0edb3f..e0476ec06601 100644 --- a/drivers/power/supply/olpc_battery.c +++ b/drivers/power/supply/olpc_battery.c @@ -88,7 +88,7 @@ static enum power_supply_property olpc_ac_props[] = { }; static const struct power_supply_desc olpc_ac_desc = { - .name = "olpc-ac", + .name = "olpc_ac", .type = POWER_SUPPLY_TYPE_MAINS, .properties = olpc_ac_props, .num_properties = ARRAY_SIZE(olpc_ac_props), @@ -605,7 +605,7 @@ static const struct attribute_group *olpc_bat_sysfs_groups[] = { *********************************************************************/ static struct power_supply_desc olpc_bat_desc = { - .name = "olpc-battery", + .name = "olpc_battery", .get_property = olpc_bat_get_property, .use_for_apm = 1, }; diff --git a/drivers/power/supply/power_supply_core.c b/drivers/power/supply/power_supply_core.c index 1a9a9fae73d3..02b37fe6061c 100644 --- a/drivers/power/supply/power_supply_core.c +++ b/drivers/power/supply/power_supply_core.c @@ -620,10 +620,18 @@ int power_supply_get_battery_info(struct power_supply *psy, &info->voltage_min_design_uv); of_property_read_u32(battery_np, "voltage-max-design-microvolt", &info->voltage_max_design_uv); + of_property_read_u32(battery_np, "trickle-charge-current-microamp", + &info->tricklecharge_current_ua); of_property_read_u32(battery_np, "precharge-current-microamp", &info->precharge_current_ua); + of_property_read_u32(battery_np, "precharge-upper-limit-microvolt", + &info->precharge_voltage_max_uv); of_property_read_u32(battery_np, "charge-term-current-microamp", &info->charge_term_current_ua); + of_property_read_u32(battery_np, "re-charge-voltage-microvolt", + &info->charge_restart_voltage_uv); + of_property_read_u32(battery_np, "over-voltage-threshold-microvolt", + &info->overvoltage_limit_uv); of_property_read_u32(battery_np, "constant-charge-current-max-microamp", &info->constant_charge_current_max_ua); of_property_read_u32(battery_np, "constant-charge-voltage-max-microvolt", diff --git a/drivers/power/supply/power_supply_hwmon.c b/drivers/power/supply/power_supply_hwmon.c index 75cf861ba492..7fe4b6b6ddc8 100644 --- a/drivers/power/supply/power_supply_hwmon.c +++ b/drivers/power/supply/power_supply_hwmon.c @@ -13,6 +13,11 @@ struct power_supply_hwmon { unsigned long *props; }; +static const char *const ps_temp_label[] = { + "temp", + "ambient temp", +}; + static int power_supply_hwmon_in_to_property(u32 attr) { switch (attr) { @@ -98,6 +103,39 @@ static bool power_supply_hwmon_is_a_label(enum hwmon_sensor_types type, return type == hwmon_temp && attr == hwmon_temp_label; } +struct hwmon_type_attr_list { + const u32 *attrs; + size_t n_attrs; +}; + +static const u32 ps_temp_attrs[] = { + hwmon_temp_input, + hwmon_temp_min, hwmon_temp_max, + hwmon_temp_min_alarm, hwmon_temp_max_alarm, +}; + +static const struct hwmon_type_attr_list ps_type_attrs[hwmon_max] = { + [hwmon_temp] = { ps_temp_attrs, ARRAY_SIZE(ps_temp_attrs) }, +}; + +static bool power_supply_hwmon_has_input( + const struct power_supply_hwmon *psyhw, + enum hwmon_sensor_types type, int channel) +{ + const struct hwmon_type_attr_list *attr_list = &ps_type_attrs[type]; + size_t i; + + for (i = 0; i < attr_list->n_attrs; ++i) { + int prop = power_supply_hwmon_to_property(type, + attr_list->attrs[i], channel); + + if (prop >= 0 && test_bit(prop, psyhw->props)) + return true; + } + + return false; +} + static bool power_supply_hwmon_is_writable(enum hwmon_sensor_types type, u32 attr) { @@ -124,9 +162,12 @@ static umode_t power_supply_hwmon_is_visible(const void *data, const struct power_supply_hwmon *psyhw = data; int prop; - - if (power_supply_hwmon_is_a_label(type, attr)) - return 0444; + if (power_supply_hwmon_is_a_label(type, attr)) { + if (power_supply_hwmon_has_input(psyhw, type, channel)) + return 0444; + else + return 0; + } prop = power_supply_hwmon_to_property(type, attr, channel); if (prop < 0 || !test_bit(prop, psyhw->props)) @@ -144,7 +185,20 @@ static int power_supply_hwmon_read_string(struct device *dev, u32 attr, int channel, const char **str) { - *str = channel ? "temp" : "temp ambient"; + switch (type) { + case hwmon_temp: + *str = ps_temp_label[channel]; + break; + default: + /* unreachable, but see: + * gcc bug #51513 [1] and clang bug #978 [2] + * + * [1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=51513 + * [2] https://github.com/ClangBuiltLinux/linux/issues/978 + */ + break; + } + return 0; } @@ -304,7 +358,7 @@ int power_supply_add_hwmon_sysfs(struct power_supply *psy) goto error; } - ret = devm_add_action(dev, power_supply_hwmon_bitmap_free, + ret = devm_add_action_or_reset(dev, power_supply_hwmon_bitmap_free, psyhw->props); if (ret) goto error; diff --git a/drivers/power/supply/power_supply_sysfs.c b/drivers/power/supply/power_supply_sysfs.c index f37ad4eae60b..bc79560229b5 100644 --- a/drivers/power/supply/power_supply_sysfs.c +++ b/drivers/power/supply/power_supply_sysfs.c @@ -18,68 +18,211 @@ #include "power_supply.h" -/* - * This is because the name "current" breaks the device attr macro. - * The "current" word resolves to "(get_current())" so instead of - * "current" "(get_current())" appears in the sysfs. - * - * The source of this definition is the device.h which calls __ATTR - * macro in sysfs.h which calls the __stringify macro. - * - * Only modification that the name is not tried to be resolved - * (as a macro let's say). - */ +#define MAX_PROP_NAME_LEN 30 + +struct power_supply_attr { + const char *prop_name; + char attr_name[MAX_PROP_NAME_LEN + 1]; + struct device_attribute dev_attr; + const char * const *text_values; + int text_values_len; +}; -#define POWER_SUPPLY_ATTR(_name) \ -{ \ - .attr = { .name = #_name }, \ - .show = power_supply_show_property, \ - .store = power_supply_store_property, \ +#define _POWER_SUPPLY_ATTR(_name, _text, _len) \ +[POWER_SUPPLY_PROP_ ## _name] = \ +{ \ + .prop_name = #_name, \ + .attr_name = #_name "\0", \ + .text_values = _text, \ + .text_values_len = _len, \ } -static struct device_attribute power_supply_attrs[]; +#define POWER_SUPPLY_ATTR(_name) _POWER_SUPPLY_ATTR(_name, NULL, 0) +#define _POWER_SUPPLY_ENUM_ATTR(_name, _text) \ + _POWER_SUPPLY_ATTR(_name, _text, ARRAY_SIZE(_text)) +#define POWER_SUPPLY_ENUM_ATTR(_name) \ + _POWER_SUPPLY_ENUM_ATTR(_name, POWER_SUPPLY_ ## _name ## _TEXT) + +static const char * const POWER_SUPPLY_TYPE_TEXT[] = { + [POWER_SUPPLY_TYPE_UNKNOWN] = "Unknown", + [POWER_SUPPLY_TYPE_BATTERY] = "Battery", + [POWER_SUPPLY_TYPE_UPS] = "UPS", + [POWER_SUPPLY_TYPE_MAINS] = "Mains", + [POWER_SUPPLY_TYPE_USB] = "USB", + [POWER_SUPPLY_TYPE_USB_DCP] = "USB_DCP", + [POWER_SUPPLY_TYPE_USB_CDP] = "USB_CDP", + [POWER_SUPPLY_TYPE_USB_ACA] = "USB_ACA", + [POWER_SUPPLY_TYPE_USB_TYPE_C] = "USB_C", + [POWER_SUPPLY_TYPE_USB_PD] = "USB_PD", + [POWER_SUPPLY_TYPE_USB_PD_DRP] = "USB_PD_DRP", + [POWER_SUPPLY_TYPE_APPLE_BRICK_ID] = "BrickID", +}; -static const char * const power_supply_type_text[] = { - "Unknown", "Battery", "UPS", "Mains", "USB", - "USB_DCP", "USB_CDP", "USB_ACA", "USB_C", - "USB_PD", "USB_PD_DRP", "BrickID" +static const char * const POWER_SUPPLY_USB_TYPE_TEXT[] = { + [POWER_SUPPLY_USB_TYPE_UNKNOWN] = "Unknown", + [POWER_SUPPLY_USB_TYPE_SDP] = "SDP", + [POWER_SUPPLY_USB_TYPE_DCP] = "DCP", + [POWER_SUPPLY_USB_TYPE_CDP] = "CDP", + [POWER_SUPPLY_USB_TYPE_ACA] = "ACA", + [POWER_SUPPLY_USB_TYPE_C] = "C", + [POWER_SUPPLY_USB_TYPE_PD] = "PD", + [POWER_SUPPLY_USB_TYPE_PD_DRP] = "PD_DRP", + [POWER_SUPPLY_USB_TYPE_PD_PPS] = "PD_PPS", + [POWER_SUPPLY_USB_TYPE_APPLE_BRICK_ID] = "BrickID", }; -static const char * const power_supply_usb_type_text[] = { - "Unknown", "SDP", "DCP", "CDP", "ACA", "C", - "PD", "PD_DRP", "PD_PPS", "BrickID" +static const char * const POWER_SUPPLY_STATUS_TEXT[] = { + [POWER_SUPPLY_STATUS_UNKNOWN] = "Unknown", + [POWER_SUPPLY_STATUS_CHARGING] = "Charging", + [POWER_SUPPLY_STATUS_DISCHARGING] = "Discharging", + [POWER_SUPPLY_STATUS_NOT_CHARGING] = "Not charging", + [POWER_SUPPLY_STATUS_FULL] = "Full", }; -static const char * const power_supply_status_text[] = { - "Unknown", "Charging", "Discharging", "Not charging", "Full" +static const char * const POWER_SUPPLY_CHARGE_TYPE_TEXT[] = { + [POWER_SUPPLY_CHARGE_TYPE_UNKNOWN] = "Unknown", + [POWER_SUPPLY_CHARGE_TYPE_NONE] = "N/A", + [POWER_SUPPLY_CHARGE_TYPE_TRICKLE] = "Trickle", + [POWER_SUPPLY_CHARGE_TYPE_FAST] = "Fast", + [POWER_SUPPLY_CHARGE_TYPE_STANDARD] = "Standard", + [POWER_SUPPLY_CHARGE_TYPE_ADAPTIVE] = "Adaptive", + [POWER_SUPPLY_CHARGE_TYPE_CUSTOM] = "Custom", }; -static const char * const power_supply_charge_type_text[] = { - "Unknown", "N/A", "Trickle", "Fast", "Standard", "Adaptive", "Custom" +static const char * const POWER_SUPPLY_HEALTH_TEXT[] = { + [POWER_SUPPLY_HEALTH_UNKNOWN] = "Unknown", + [POWER_SUPPLY_HEALTH_GOOD] = "Good", + [POWER_SUPPLY_HEALTH_OVERHEAT] = "Overheat", + [POWER_SUPPLY_HEALTH_DEAD] = "Dead", + [POWER_SUPPLY_HEALTH_OVERVOLTAGE] = "Over voltage", + [POWER_SUPPLY_HEALTH_UNSPEC_FAILURE] = "Unspecified failure", + [POWER_SUPPLY_HEALTH_COLD] = "Cold", + [POWER_SUPPLY_HEALTH_WATCHDOG_TIMER_EXPIRE] = "Watchdog timer expire", + [POWER_SUPPLY_HEALTH_SAFETY_TIMER_EXPIRE] = "Safety timer expire", + [POWER_SUPPLY_HEALTH_OVERCURRENT] = "Over current", + [POWER_SUPPLY_HEALTH_CALIBRATION_REQUIRED] = "Calibration required", }; -static const char * const power_supply_health_text[] = { - "Unknown", "Good", "Overheat", "Dead", "Over voltage", - "Unspecified failure", "Cold", "Watchdog timer expire", - "Safety timer expire", "Over current" +static const char * const POWER_SUPPLY_TECHNOLOGY_TEXT[] = { + [POWER_SUPPLY_TECHNOLOGY_UNKNOWN] = "Unknown", + [POWER_SUPPLY_TECHNOLOGY_NiMH] = "NiMH", + [POWER_SUPPLY_TECHNOLOGY_LION] = "Li-ion", + [POWER_SUPPLY_TECHNOLOGY_LIPO] = "Li-poly", + [POWER_SUPPLY_TECHNOLOGY_LiFe] = "LiFe", + [POWER_SUPPLY_TECHNOLOGY_NiCd] = "NiCd", + [POWER_SUPPLY_TECHNOLOGY_LiMn] = "LiMn", }; -static const char * const power_supply_technology_text[] = { - "Unknown", "NiMH", "Li-ion", "Li-poly", "LiFe", "NiCd", - "LiMn" +static const char * const POWER_SUPPLY_CAPACITY_LEVEL_TEXT[] = { + [POWER_SUPPLY_CAPACITY_LEVEL_UNKNOWN] = "Unknown", + [POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL] = "Critical", + [POWER_SUPPLY_CAPACITY_LEVEL_LOW] = "Low", + [POWER_SUPPLY_CAPACITY_LEVEL_NORMAL] = "Normal", + [POWER_SUPPLY_CAPACITY_LEVEL_HIGH] = "High", + [POWER_SUPPLY_CAPACITY_LEVEL_FULL] = "Full", }; -static const char * const power_supply_capacity_level_text[] = { - "Unknown", "Critical", "Low", "Normal", "High", "Full" +static const char * const POWER_SUPPLY_SCOPE_TEXT[] = { + [POWER_SUPPLY_SCOPE_UNKNOWN] = "Unknown", + [POWER_SUPPLY_SCOPE_SYSTEM] = "System", + [POWER_SUPPLY_SCOPE_DEVICE] = "Device", }; -static const char * const power_supply_scope_text[] = { - "Unknown", "System", "Device" +static struct power_supply_attr power_supply_attrs[] = { + /* Properties of type `int' */ + POWER_SUPPLY_ENUM_ATTR(STATUS), + POWER_SUPPLY_ENUM_ATTR(CHARGE_TYPE), + POWER_SUPPLY_ENUM_ATTR(HEALTH), + POWER_SUPPLY_ATTR(PRESENT), + POWER_SUPPLY_ATTR(ONLINE), + POWER_SUPPLY_ATTR(AUTHENTIC), + POWER_SUPPLY_ENUM_ATTR(TECHNOLOGY), + POWER_SUPPLY_ATTR(CYCLE_COUNT), + POWER_SUPPLY_ATTR(VOLTAGE_MAX), + POWER_SUPPLY_ATTR(VOLTAGE_MIN), + POWER_SUPPLY_ATTR(VOLTAGE_MAX_DESIGN), + POWER_SUPPLY_ATTR(VOLTAGE_MIN_DESIGN), + POWER_SUPPLY_ATTR(VOLTAGE_NOW), + POWER_SUPPLY_ATTR(VOLTAGE_AVG), + POWER_SUPPLY_ATTR(VOLTAGE_OCV), + POWER_SUPPLY_ATTR(VOLTAGE_BOOT), + POWER_SUPPLY_ATTR(CURRENT_MAX), + POWER_SUPPLY_ATTR(CURRENT_NOW), + POWER_SUPPLY_ATTR(CURRENT_AVG), + POWER_SUPPLY_ATTR(CURRENT_BOOT), + POWER_SUPPLY_ATTR(POWER_NOW), + POWER_SUPPLY_ATTR(POWER_AVG), + POWER_SUPPLY_ATTR(CHARGE_FULL_DESIGN), + POWER_SUPPLY_ATTR(CHARGE_EMPTY_DESIGN), + POWER_SUPPLY_ATTR(CHARGE_FULL), + POWER_SUPPLY_ATTR(CHARGE_EMPTY), + POWER_SUPPLY_ATTR(CHARGE_NOW), + POWER_SUPPLY_ATTR(CHARGE_AVG), + POWER_SUPPLY_ATTR(CHARGE_COUNTER), + POWER_SUPPLY_ATTR(CONSTANT_CHARGE_CURRENT), + POWER_SUPPLY_ATTR(CONSTANT_CHARGE_CURRENT_MAX), + POWER_SUPPLY_ATTR(CONSTANT_CHARGE_VOLTAGE), + POWER_SUPPLY_ATTR(CONSTANT_CHARGE_VOLTAGE_MAX), + POWER_SUPPLY_ATTR(CHARGE_CONTROL_LIMIT), + POWER_SUPPLY_ATTR(CHARGE_CONTROL_LIMIT_MAX), + POWER_SUPPLY_ATTR(CHARGE_CONTROL_START_THRESHOLD), + POWER_SUPPLY_ATTR(CHARGE_CONTROL_END_THRESHOLD), + POWER_SUPPLY_ATTR(INPUT_CURRENT_LIMIT), + POWER_SUPPLY_ATTR(INPUT_VOLTAGE_LIMIT), + POWER_SUPPLY_ATTR(INPUT_POWER_LIMIT), + POWER_SUPPLY_ATTR(ENERGY_FULL_DESIGN), + POWER_SUPPLY_ATTR(ENERGY_EMPTY_DESIGN), + POWER_SUPPLY_ATTR(ENERGY_FULL), + POWER_SUPPLY_ATTR(ENERGY_EMPTY), + POWER_SUPPLY_ATTR(ENERGY_NOW), + POWER_SUPPLY_ATTR(ENERGY_AVG), + POWER_SUPPLY_ATTR(CAPACITY), + POWER_SUPPLY_ATTR(CAPACITY_ALERT_MIN), + POWER_SUPPLY_ATTR(CAPACITY_ALERT_MAX), + POWER_SUPPLY_ATTR(CAPACITY_ERROR_MARGIN), + POWER_SUPPLY_ENUM_ATTR(CAPACITY_LEVEL), + POWER_SUPPLY_ATTR(TEMP), + POWER_SUPPLY_ATTR(TEMP_MAX), + POWER_SUPPLY_ATTR(TEMP_MIN), + POWER_SUPPLY_ATTR(TEMP_ALERT_MIN), + POWER_SUPPLY_ATTR(TEMP_ALERT_MAX), + POWER_SUPPLY_ATTR(TEMP_AMBIENT), + POWER_SUPPLY_ATTR(TEMP_AMBIENT_ALERT_MIN), + POWER_SUPPLY_ATTR(TEMP_AMBIENT_ALERT_MAX), + POWER_SUPPLY_ATTR(TIME_TO_EMPTY_NOW), + POWER_SUPPLY_ATTR(TIME_TO_EMPTY_AVG), + POWER_SUPPLY_ATTR(TIME_TO_FULL_NOW), + POWER_SUPPLY_ATTR(TIME_TO_FULL_AVG), + POWER_SUPPLY_ENUM_ATTR(TYPE), + POWER_SUPPLY_ATTR(USB_TYPE), + POWER_SUPPLY_ENUM_ATTR(SCOPE), + POWER_SUPPLY_ATTR(PRECHARGE_CURRENT), + POWER_SUPPLY_ATTR(CHARGE_TERM_CURRENT), + POWER_SUPPLY_ATTR(CALIBRATE), + POWER_SUPPLY_ATTR(MANUFACTURE_YEAR), + POWER_SUPPLY_ATTR(MANUFACTURE_MONTH), + POWER_SUPPLY_ATTR(MANUFACTURE_DAY), + /* Properties of type `const char *' */ + POWER_SUPPLY_ATTR(MODEL_NAME), + POWER_SUPPLY_ATTR(MANUFACTURER), + POWER_SUPPLY_ATTR(SERIAL_NUMBER), }; +static struct attribute * +__power_supply_attrs[ARRAY_SIZE(power_supply_attrs) + 1]; + +static struct power_supply_attr *to_ps_attr(struct device_attribute *attr) +{ + return container_of(attr, struct power_supply_attr, dev_attr); +} + +static enum power_supply_property dev_attr_psp(struct device_attribute *attr) +{ + return to_ps_attr(attr) - power_supply_attrs; +} + static ssize_t power_supply_show_usb_type(struct device *dev, - enum power_supply_usb_type *usb_types, - ssize_t num_usb_types, + const struct power_supply_desc *desc, union power_supply_propval *value, char *buf) { @@ -88,16 +231,16 @@ static ssize_t power_supply_show_usb_type(struct device *dev, bool match = false; int i; - for (i = 0; i < num_usb_types; ++i) { - usb_type = usb_types[i]; + for (i = 0; i < desc->num_usb_types; ++i) { + usb_type = desc->usb_types[i]; if (value->intval == usb_type) { count += sprintf(buf + count, "[%s] ", - power_supply_usb_type_text[usb_type]); + POWER_SUPPLY_USB_TYPE_TEXT[usb_type]); match = true; } else { count += sprintf(buf + count, "%s ", - power_supply_usb_type_text[usb_type]); + POWER_SUPPLY_USB_TYPE_TEXT[usb_type]); } } @@ -117,7 +260,8 @@ static ssize_t power_supply_show_property(struct device *dev, char *buf) { ssize_t ret; struct power_supply *psy = dev_get_drvdata(dev); - enum power_supply_property psp = attr - power_supply_attrs; + struct power_supply_attr *ps_attr = to_ps_attr(attr); + enum power_supply_property psp = dev_attr_psp(attr); union power_supply_propval value; if (psp == POWER_SUPPLY_PROP_TYPE) { @@ -137,39 +281,15 @@ static ssize_t power_supply_show_property(struct device *dev, } } + if (ps_attr->text_values_len > 0 && + value.intval < ps_attr->text_values_len && value.intval >= 0) { + return sprintf(buf, "%s\n", ps_attr->text_values[value.intval]); + } + switch (psp) { - case POWER_SUPPLY_PROP_STATUS: - ret = sprintf(buf, "%s\n", - power_supply_status_text[value.intval]); - break; - case POWER_SUPPLY_PROP_CHARGE_TYPE: - ret = sprintf(buf, "%s\n", - power_supply_charge_type_text[value.intval]); - break; - case POWER_SUPPLY_PROP_HEALTH: - ret = sprintf(buf, "%s\n", - power_supply_health_text[value.intval]); - break; - case POWER_SUPPLY_PROP_TECHNOLOGY: - ret = sprintf(buf, "%s\n", - power_supply_technology_text[value.intval]); - break; - case POWER_SUPPLY_PROP_CAPACITY_LEVEL: - ret = sprintf(buf, "%s\n", - power_supply_capacity_level_text[value.intval]); - break; - case POWER_SUPPLY_PROP_TYPE: - ret = sprintf(buf, "%s\n", - power_supply_type_text[value.intval]); - break; case POWER_SUPPLY_PROP_USB_TYPE: - ret = power_supply_show_usb_type(dev, psy->desc->usb_types, - psy->desc->num_usb_types, - &value, buf); - break; - case POWER_SUPPLY_PROP_SCOPE: - ret = sprintf(buf, "%s\n", - power_supply_scope_text[value.intval]); + ret = power_supply_show_usb_type(dev, psy->desc, + &value, buf); break; case POWER_SUPPLY_PROP_MODEL_NAME ... POWER_SUPPLY_PROP_SERIAL_NUMBER: ret = sprintf(buf, "%s\n", value.strval); @@ -186,30 +306,14 @@ static ssize_t power_supply_store_property(struct device *dev, const char *buf, size_t count) { ssize_t ret; struct power_supply *psy = dev_get_drvdata(dev); - enum power_supply_property psp = attr - power_supply_attrs; + struct power_supply_attr *ps_attr = to_ps_attr(attr); + enum power_supply_property psp = dev_attr_psp(attr); union power_supply_propval value; - switch (psp) { - case POWER_SUPPLY_PROP_STATUS: - ret = sysfs_match_string(power_supply_status_text, buf); - break; - case POWER_SUPPLY_PROP_CHARGE_TYPE: - ret = sysfs_match_string(power_supply_charge_type_text, buf); - break; - case POWER_SUPPLY_PROP_HEALTH: - ret = sysfs_match_string(power_supply_health_text, buf); - break; - case POWER_SUPPLY_PROP_TECHNOLOGY: - ret = sysfs_match_string(power_supply_technology_text, buf); - break; - case POWER_SUPPLY_PROP_CAPACITY_LEVEL: - ret = sysfs_match_string(power_supply_capacity_level_text, buf); - break; - case POWER_SUPPLY_PROP_SCOPE: - ret = sysfs_match_string(power_supply_scope_text, buf); - break; - default: - ret = -EINVAL; + ret = -EINVAL; + if (ps_attr->text_values_len > 0) { + ret = __sysfs_match_string(ps_attr->text_values, + ps_attr->text_values_len, buf); } /* @@ -235,86 +339,6 @@ static ssize_t power_supply_store_property(struct device *dev, return count; } -/* Must be in the same order as POWER_SUPPLY_PROP_* */ -static struct device_attribute power_supply_attrs[] = { - /* Properties of type `int' */ - POWER_SUPPLY_ATTR(status), - POWER_SUPPLY_ATTR(charge_type), - POWER_SUPPLY_ATTR(health), - POWER_SUPPLY_ATTR(present), - POWER_SUPPLY_ATTR(online), - POWER_SUPPLY_ATTR(authentic), - POWER_SUPPLY_ATTR(technology), - POWER_SUPPLY_ATTR(cycle_count), - POWER_SUPPLY_ATTR(voltage_max), - POWER_SUPPLY_ATTR(voltage_min), - POWER_SUPPLY_ATTR(voltage_max_design), - POWER_SUPPLY_ATTR(voltage_min_design), - POWER_SUPPLY_ATTR(voltage_now), - POWER_SUPPLY_ATTR(voltage_avg), - POWER_SUPPLY_ATTR(voltage_ocv), - POWER_SUPPLY_ATTR(voltage_boot), - POWER_SUPPLY_ATTR(current_max), - POWER_SUPPLY_ATTR(current_now), - POWER_SUPPLY_ATTR(current_avg), - POWER_SUPPLY_ATTR(current_boot), - POWER_SUPPLY_ATTR(power_now), - POWER_SUPPLY_ATTR(power_avg), - POWER_SUPPLY_ATTR(charge_full_design), - POWER_SUPPLY_ATTR(charge_empty_design), - POWER_SUPPLY_ATTR(charge_full), - POWER_SUPPLY_ATTR(charge_empty), - POWER_SUPPLY_ATTR(charge_now), - POWER_SUPPLY_ATTR(charge_avg), - POWER_SUPPLY_ATTR(charge_counter), - POWER_SUPPLY_ATTR(constant_charge_current), - POWER_SUPPLY_ATTR(constant_charge_current_max), - POWER_SUPPLY_ATTR(constant_charge_voltage), - POWER_SUPPLY_ATTR(constant_charge_voltage_max), - POWER_SUPPLY_ATTR(charge_control_limit), - POWER_SUPPLY_ATTR(charge_control_limit_max), - POWER_SUPPLY_ATTR(charge_control_start_threshold), - POWER_SUPPLY_ATTR(charge_control_end_threshold), - POWER_SUPPLY_ATTR(input_current_limit), - POWER_SUPPLY_ATTR(input_voltage_limit), - POWER_SUPPLY_ATTR(input_power_limit), - POWER_SUPPLY_ATTR(energy_full_design), - POWER_SUPPLY_ATTR(energy_empty_design), - POWER_SUPPLY_ATTR(energy_full), - POWER_SUPPLY_ATTR(energy_empty), - POWER_SUPPLY_ATTR(energy_now), - POWER_SUPPLY_ATTR(energy_avg), - POWER_SUPPLY_ATTR(capacity), - POWER_SUPPLY_ATTR(capacity_alert_min), - POWER_SUPPLY_ATTR(capacity_alert_max), - POWER_SUPPLY_ATTR(capacity_level), - POWER_SUPPLY_ATTR(temp), - POWER_SUPPLY_ATTR(temp_max), - POWER_SUPPLY_ATTR(temp_min), - POWER_SUPPLY_ATTR(temp_alert_min), - POWER_SUPPLY_ATTR(temp_alert_max), - POWER_SUPPLY_ATTR(temp_ambient), - POWER_SUPPLY_ATTR(temp_ambient_alert_min), - POWER_SUPPLY_ATTR(temp_ambient_alert_max), - POWER_SUPPLY_ATTR(time_to_empty_now), - POWER_SUPPLY_ATTR(time_to_empty_avg), - POWER_SUPPLY_ATTR(time_to_full_now), - POWER_SUPPLY_ATTR(time_to_full_avg), - POWER_SUPPLY_ATTR(type), - POWER_SUPPLY_ATTR(usb_type), - POWER_SUPPLY_ATTR(scope), - POWER_SUPPLY_ATTR(precharge_current), - POWER_SUPPLY_ATTR(charge_term_current), - POWER_SUPPLY_ATTR(calibrate), - /* Properties of type `const char *' */ - POWER_SUPPLY_ATTR(model_name), - POWER_SUPPLY_ATTR(manufacturer), - POWER_SUPPLY_ATTR(serial_number), -}; - -static struct attribute * -__power_supply_attrs[ARRAY_SIZE(power_supply_attrs) + 1]; - static umode_t power_supply_attr_is_visible(struct kobject *kobj, struct attribute *attr, int attrno) @@ -324,6 +348,9 @@ static umode_t power_supply_attr_is_visible(struct kobject *kobj, umode_t mode = S_IRUSR | S_IRGRP | S_IROTH; int i; + if (!power_supply_attrs[attrno].prop_name) + return 0; + if (attrno == POWER_SUPPLY_PROP_TYPE) return mode; @@ -352,31 +379,69 @@ static const struct attribute_group *power_supply_attr_groups[] = { NULL, }; +static void str_to_lower(char *str) +{ + while (*str) { + *str = tolower(*str); + str++; + } +} + void power_supply_init_attrs(struct device_type *dev_type) { int i; dev_type->groups = power_supply_attr_groups; - for (i = 0; i < ARRAY_SIZE(power_supply_attrs); i++) - __power_supply_attrs[i] = &power_supply_attrs[i].attr; -} + for (i = 0; i < ARRAY_SIZE(power_supply_attrs); i++) { + struct device_attribute *attr; -static char *kstruprdup(const char *str, gfp_t gfp) -{ - char *ret, *ustr; + if (!power_supply_attrs[i].prop_name) { + pr_warn("%s: Property %d skipped because is is missing from power_supply_attrs\n", + __func__, i); + sprintf(power_supply_attrs[i].attr_name, "_err_%d", i); + } else { + str_to_lower(power_supply_attrs[i].attr_name); + } - ustr = ret = kmalloc(strlen(str) + 1, gfp); + attr = &power_supply_attrs[i].dev_attr; - if (!ret) - return NULL; + attr->attr.name = power_supply_attrs[i].attr_name; + attr->show = power_supply_show_property; + attr->store = power_supply_store_property; + __power_supply_attrs[i] = &attr->attr; + } +} + +static int add_prop_uevent(struct device *dev, struct kobj_uevent_env *env, + enum power_supply_property prop, char *prop_buf) +{ + int ret = 0; + struct power_supply_attr *pwr_attr; + struct device_attribute *dev_attr; + char *line; + + pwr_attr = &power_supply_attrs[prop]; + dev_attr = &pwr_attr->dev_attr; + + ret = power_supply_show_property(dev, dev_attr, prop_buf); + if (ret == -ENODEV || ret == -ENODATA) { + /* + * When a battery is absent, we expect -ENODEV. Don't abort; + * send the uevent with at least the the PRESENT=0 property + */ + return 0; + } - while (*str) - *ustr++ = toupper(*str++); + if (ret < 0) + return ret; - *ustr = 0; + line = strchr(prop_buf, '\n'); + if (line) + *line = 0; - return ret; + return add_uevent_var(env, "POWER_SUPPLY_%s=%s", + pwr_attr->prop_name, prop_buf); } int power_supply_uevent(struct device *dev, struct kobj_uevent_env *env) @@ -384,7 +449,6 @@ int power_supply_uevent(struct device *dev, struct kobj_uevent_env *env) struct power_supply *psy = dev_get_drvdata(dev); int ret = 0, j; char *prop_buf; - char *attrname; if (!psy || !psy->desc) { dev_dbg(dev, "No power supply yet\n"); @@ -399,35 +463,13 @@ int power_supply_uevent(struct device *dev, struct kobj_uevent_env *env) if (!prop_buf) return -ENOMEM; - for (j = 0; j < psy->desc->num_properties; j++) { - struct device_attribute *attr; - char *line; - - attr = &power_supply_attrs[psy->desc->properties[j]]; - - ret = power_supply_show_property(dev, attr, prop_buf); - if (ret == -ENODEV || ret == -ENODATA) { - /* When a battery is absent, we expect -ENODEV. Don't abort; - send the uevent with at least the the PRESENT=0 property */ - ret = 0; - continue; - } - - if (ret < 0) - goto out; - - line = strchr(prop_buf, '\n'); - if (line) - *line = 0; - - attrname = kstruprdup(attr->attr.name, GFP_KERNEL); - if (!attrname) { - ret = -ENOMEM; - goto out; - } + ret = add_prop_uevent(dev, env, POWER_SUPPLY_PROP_TYPE, prop_buf); + if (ret) + goto out; - ret = add_uevent_var(env, "POWER_SUPPLY_%s=%s", attrname, prop_buf); - kfree(attrname); + for (j = 0; j < psy->desc->num_properties; j++) { + ret = add_prop_uevent(dev, env, psy->desc->properties[j], + prop_buf); if (ret) goto out; } diff --git a/drivers/power/supply/sbs-battery.c b/drivers/power/supply/sbs-battery.c index 6acd242eed48..83b9924033bd 100644 --- a/drivers/power/supply/sbs-battery.c +++ b/drivers/power/supply/sbs-battery.c @@ -14,7 +14,7 @@ #include <linux/interrupt.h> #include <linux/kernel.h> #include <linux/module.h> -#include <linux/of.h> +#include <linux/property.h> #include <linux/of_device.h> #include <linux/power/sbs-battery.h> #include <linux/power_supply.h> @@ -23,9 +23,12 @@ enum { REG_MANUFACTURER_DATA, + REG_BATTERY_MODE, REG_TEMPERATURE, REG_VOLTAGE, - REG_CURRENT, + REG_CURRENT_NOW, + REG_CURRENT_AVG, + REG_MAX_ERR, REG_CAPACITY, REG_TIME_TO_EMPTY, REG_TIME_TO_FULL, @@ -41,10 +44,15 @@ enum { REG_DESIGN_CAPACITY_CHARGE, REG_DESIGN_VOLTAGE_MIN, REG_DESIGN_VOLTAGE_MAX, + REG_CHEMISTRY, REG_MANUFACTURER, REG_MODEL_NAME, + REG_CHARGE_CURRENT, + REG_CHARGE_VOLTAGE, }; +#define REG_ADDR_MANUFACTURE_DATE 0x1B + /* Battery Mode defines */ #define BATTERY_MODE_OFFSET 0x03 #define BATTERY_MODE_CAPACITY_MASK BIT(15) @@ -52,6 +60,7 @@ enum sbs_capacity_mode { CAPACITY_MODE_AMPS = 0, CAPACITY_MODE_WATTS = BATTERY_MODE_CAPACITY_MASK }; +#define BATTERY_MODE_CHARGER_MASK (1<<14) /* manufacturer access defines */ #define MANUFACTURER_ACCESS_STATUS 0x0006 @@ -79,12 +88,18 @@ static const struct chip_data { } sbs_data[] = { [REG_MANUFACTURER_DATA] = SBS_DATA(POWER_SUPPLY_PROP_PRESENT, 0x00, 0, 65535), + [REG_BATTERY_MODE] = + SBS_DATA(-1, 0x03, 0, 65535), [REG_TEMPERATURE] = SBS_DATA(POWER_SUPPLY_PROP_TEMP, 0x08, 0, 65535), [REG_VOLTAGE] = SBS_DATA(POWER_SUPPLY_PROP_VOLTAGE_NOW, 0x09, 0, 20000), - [REG_CURRENT] = + [REG_CURRENT_NOW] = SBS_DATA(POWER_SUPPLY_PROP_CURRENT_NOW, 0x0A, -32768, 32767), + [REG_CURRENT_AVG] = + SBS_DATA(POWER_SUPPLY_PROP_CURRENT_AVG, 0x0B, -32768, 32767), + [REG_MAX_ERR] = + SBS_DATA(POWER_SUPPLY_PROP_CAPACITY_ERROR_MARGIN, 0x0c, 0, 100), [REG_CAPACITY] = SBS_DATA(POWER_SUPPLY_PROP_CAPACITY, 0x0D, 0, 100), [REG_REMAINING_CAPACITY] = @@ -99,6 +114,10 @@ static const struct chip_data { SBS_DATA(POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG, 0x12, 0, 65535), [REG_TIME_TO_FULL] = SBS_DATA(POWER_SUPPLY_PROP_TIME_TO_FULL_AVG, 0x13, 0, 65535), + [REG_CHARGE_CURRENT] = + SBS_DATA(POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX, 0x14, 0, 65535), + [REG_CHARGE_VOLTAGE] = + SBS_DATA(POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX, 0x15, 0, 65535), [REG_STATUS] = SBS_DATA(POWER_SUPPLY_PROP_STATUS, 0x16, 0, 65535), [REG_CAPACITY_LEVEL] = @@ -119,10 +138,12 @@ static const struct chip_data { [REG_MANUFACTURER] = SBS_DATA(POWER_SUPPLY_PROP_MANUFACTURER, 0x20, 0, 65535), [REG_MODEL_NAME] = - SBS_DATA(POWER_SUPPLY_PROP_MODEL_NAME, 0x21, 0, 65535) + SBS_DATA(POWER_SUPPLY_PROP_MODEL_NAME, 0x21, 0, 65535), + [REG_CHEMISTRY] = + SBS_DATA(POWER_SUPPLY_PROP_TECHNOLOGY, 0x22, 0, 65535) }; -static enum power_supply_property sbs_properties[] = { +static const enum power_supply_property sbs_properties[] = { POWER_SUPPLY_PROP_STATUS, POWER_SUPPLY_PROP_CAPACITY_LEVEL, POWER_SUPPLY_PROP_HEALTH, @@ -131,7 +152,9 @@ static enum power_supply_property sbs_properties[] = { POWER_SUPPLY_PROP_CYCLE_COUNT, POWER_SUPPLY_PROP_VOLTAGE_NOW, POWER_SUPPLY_PROP_CURRENT_NOW, + POWER_SUPPLY_PROP_CURRENT_AVG, POWER_SUPPLY_PROP_CAPACITY, + POWER_SUPPLY_PROP_CAPACITY_ERROR_MARGIN, POWER_SUPPLY_PROP_TEMP, POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG, POWER_SUPPLY_PROP_TIME_TO_FULL_AVG, @@ -144,13 +167,18 @@ static enum power_supply_property sbs_properties[] = { POWER_SUPPLY_PROP_CHARGE_NOW, POWER_SUPPLY_PROP_CHARGE_FULL, POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, + POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX, + POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX, + POWER_SUPPLY_PROP_MANUFACTURE_YEAR, + POWER_SUPPLY_PROP_MANUFACTURE_MONTH, + POWER_SUPPLY_PROP_MANUFACTURE_DAY, /* Properties of type `const char *' */ POWER_SUPPLY_PROP_MANUFACTURER, POWER_SUPPLY_PROP_MODEL_NAME }; -/* Supports special manufacturer commands from TI BQ20Z75 IC. */ -#define SBS_FLAGS_TI_BQ20Z75 BIT(0) +/* Supports special manufacturer commands from TI BQ20Z65 and BQ20Z75 IC. */ +#define SBS_FLAGS_TI_BQ20ZX5 BIT(0) struct sbs_info { struct i2c_client *client; @@ -158,6 +186,7 @@ struct sbs_info { bool is_present; struct gpio_desc *gpio_detect; bool enable_detection; + bool charger_broadcasts; int last_state; int poll_time; u32 i2c_retry_count; @@ -169,8 +198,48 @@ struct sbs_info { static char model_name[I2C_SMBUS_BLOCK_MAX + 1]; static char manufacturer[I2C_SMBUS_BLOCK_MAX + 1]; +static char chemistry[I2C_SMBUS_BLOCK_MAX + 1]; static bool force_load; +static int sbs_read_word_data(struct i2c_client *client, u8 address); +static int sbs_write_word_data(struct i2c_client *client, u8 address, u16 value); + +static void sbs_disable_charger_broadcasts(struct sbs_info *chip) +{ + int val = sbs_read_word_data(chip->client, BATTERY_MODE_OFFSET); + if (val < 0) + goto exit; + + val |= BATTERY_MODE_CHARGER_MASK; + + val = sbs_write_word_data(chip->client, BATTERY_MODE_OFFSET, val); + +exit: + if (val < 0) + dev_err(&chip->client->dev, + "Failed to disable charger broadcasting: %d\n", val); + else + dev_dbg(&chip->client->dev, "%s\n", __func__); +} + +static int sbs_update_presence(struct sbs_info *chip, bool is_present) +{ + if (chip->is_present == is_present) + return 0; + + if (!is_present) { + chip->is_present = false; + return 0; + } + + if (!chip->is_present && is_present && !chip->charger_broadcasts) + sbs_disable_charger_broadcasts(chip); + + chip->is_present = true; + + return 0; +} + static int sbs_read_word_data(struct i2c_client *client, u8 address) { struct sbs_info *chip = i2c_get_clientdata(client); @@ -288,15 +357,15 @@ static int sbs_status_correct(struct i2c_client *client, int *intval) { int ret; - ret = sbs_read_word_data(client, sbs_data[REG_CURRENT].addr); + ret = sbs_read_word_data(client, sbs_data[REG_CURRENT_NOW].addr); if (ret < 0) return ret; ret = (s16)ret; - /* Not drawing current means full (cannot be not charging) */ - if (ret == 0) - *intval = POWER_SUPPLY_STATUS_FULL; + /* Not drawing current -> not charging (i.e. idle) */ + if (*intval != POWER_SUPPLY_STATUS_FULL && ret == 0) + *intval = POWER_SUPPLY_STATUS_NOT_CHARGING; if (*intval == POWER_SUPPLY_STATUS_FULL) { /* Drawing or providing current when full */ @@ -309,6 +378,17 @@ static int sbs_status_correct(struct i2c_client *client, int *intval) return 0; } +static bool sbs_bat_needs_calibration(struct i2c_client *client) +{ + int ret; + + ret = sbs_read_word_data(client, sbs_data[REG_BATTERY_MODE].addr); + if (ret < 0) + return false; + + return !!(ret & BIT(7)); +} + static int sbs_get_battery_presence_and_health( struct i2c_client *client, enum power_supply_property psp, union power_supply_propval *val) @@ -328,9 +408,14 @@ static int sbs_get_battery_presence_and_health( if (psp == POWER_SUPPLY_PROP_PRESENT) val->intval = 1; /* battery present */ - else /* POWER_SUPPLY_PROP_HEALTH */ - /* SBS spec doesn't have a general health command. */ - val->intval = POWER_SUPPLY_HEALTH_UNKNOWN; + else { /* POWER_SUPPLY_PROP_HEALTH */ + if (sbs_bat_needs_calibration(client)) { + val->intval = POWER_SUPPLY_HEALTH_CALIBRATION_REQUIRED; + } else { + /* SBS spec doesn't have a general health command. */ + val->intval = POWER_SUPPLY_HEALTH_UNKNOWN; + } + } return 0; } @@ -384,6 +469,8 @@ static int sbs_get_ti_battery_presence_and_health( val->intval = POWER_SUPPLY_HEALTH_OVERHEAT; else if (ret == 0x0C) val->intval = POWER_SUPPLY_HEALTH_DEAD; + else if (sbs_bat_needs_calibration(client)) + val->intval = POWER_SUPPLY_HEALTH_CALIBRATION_REQUIRED; else val->intval = POWER_SUPPLY_HEALTH_GOOD; } @@ -492,7 +579,10 @@ static void sbs_unit_adjustment(struct i2c_client *client, case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN: case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN: case POWER_SUPPLY_PROP_CURRENT_NOW: + case POWER_SUPPLY_PROP_CURRENT_AVG: case POWER_SUPPLY_PROP_CHARGE_NOW: + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX: + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX: case POWER_SUPPLY_PROP_CHARGE_FULL: case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN: val->intval *= BASE_UNIT_CONVERSION; @@ -602,6 +692,70 @@ static int sbs_get_property_index(struct i2c_client *client, return -EINVAL; } +static int sbs_get_chemistry(struct i2c_client *client, + union power_supply_propval *val) +{ + enum power_supply_property psp = POWER_SUPPLY_PROP_TECHNOLOGY; + int ret; + + ret = sbs_get_property_index(client, psp); + if (ret < 0) + return ret; + + ret = sbs_get_battery_string_property(client, ret, psp, + chemistry); + if (ret < 0) + return ret; + + if (!strncasecmp(chemistry, "LION", 4)) + val->intval = POWER_SUPPLY_TECHNOLOGY_LION; + else if (!strncasecmp(chemistry, "LiP", 3)) + val->intval = POWER_SUPPLY_TECHNOLOGY_LIPO; + else if (!strncasecmp(chemistry, "NiCd", 4)) + val->intval = POWER_SUPPLY_TECHNOLOGY_NiCd; + else if (!strncasecmp(chemistry, "NiMH", 4)) + val->intval = POWER_SUPPLY_TECHNOLOGY_NiMH; + else + val->intval = POWER_SUPPLY_TECHNOLOGY_UNKNOWN; + + if (val->intval == POWER_SUPPLY_TECHNOLOGY_UNKNOWN) + dev_warn(&client->dev, "Unknown chemistry: %s\n", chemistry); + + return 0; +} + +static int sbs_get_battery_manufacture_date(struct i2c_client *client, + enum power_supply_property psp, + union power_supply_propval *val) +{ + int ret; + u16 day, month, year; + + ret = sbs_read_word_data(client, REG_ADDR_MANUFACTURE_DATE); + if (ret < 0) + return ret; + + day = ret & GENMASK(4, 0); + month = (ret & GENMASK(8, 5)) >> 5; + year = ((ret & GENMASK(15, 9)) >> 9) + 1980; + + switch (psp) { + case POWER_SUPPLY_PROP_MANUFACTURE_YEAR: + val->intval = year; + break; + case POWER_SUPPLY_PROP_MANUFACTURE_MONTH: + val->intval = month; + break; + case POWER_SUPPLY_PROP_MANUFACTURE_DAY: + val->intval = day; + break; + default: + return -EINVAL; + } + + return 0; +} + static int sbs_get_property(struct power_supply *psy, enum power_supply_property psp, union power_supply_propval *val) @@ -616,7 +770,7 @@ static int sbs_get_property(struct power_supply *psy, return ret; if (psp == POWER_SUPPLY_PROP_PRESENT) { val->intval = ret; - chip->is_present = val->intval; + sbs_update_presence(chip, ret); return 0; } if (ret == 0) @@ -626,7 +780,7 @@ static int sbs_get_property(struct power_supply *psy, switch (psp) { case POWER_SUPPLY_PROP_PRESENT: case POWER_SUPPLY_PROP_HEALTH: - if (chip->flags & SBS_FLAGS_TI_BQ20Z75) + if (chip->flags & SBS_FLAGS_TI_BQ20ZX5) ret = sbs_get_ti_battery_presence_and_health(client, psp, val); else @@ -639,7 +793,10 @@ static int sbs_get_property(struct power_supply *psy, break; case POWER_SUPPLY_PROP_TECHNOLOGY: - val->intval = POWER_SUPPLY_TECHNOLOGY_LION; + ret = sbs_get_chemistry(client, val); + if (ret < 0) + break; + goto done; /* don't trigger power_supply_changed()! */ case POWER_SUPPLY_PROP_ENERGY_NOW: @@ -670,12 +827,16 @@ static int sbs_get_property(struct power_supply *psy, case POWER_SUPPLY_PROP_CYCLE_COUNT: case POWER_SUPPLY_PROP_VOLTAGE_NOW: case POWER_SUPPLY_PROP_CURRENT_NOW: + case POWER_SUPPLY_PROP_CURRENT_AVG: case POWER_SUPPLY_PROP_TEMP: case POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG: case POWER_SUPPLY_PROP_TIME_TO_FULL_AVG: case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN: case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN: + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX: + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX: case POWER_SUPPLY_PROP_CAPACITY: + case POWER_SUPPLY_PROP_CAPACITY_ERROR_MARGIN: ret = sbs_get_property_index(client, psp); if (ret < 0) break; @@ -703,6 +864,12 @@ static int sbs_get_property(struct power_supply *psy, val->strval = manufacturer; break; + case POWER_SUPPLY_PROP_MANUFACTURE_YEAR: + case POWER_SUPPLY_PROP_MANUFACTURE_MONTH: + case POWER_SUPPLY_PROP_MANUFACTURE_DAY: + ret = sbs_get_battery_manufacture_date(client, psp, val); + break; + default: dev_err(&client->dev, "%s: INVALID property\n", __func__); @@ -714,7 +881,7 @@ static int sbs_get_property(struct power_supply *psy, if (!chip->gpio_detect && chip->is_present != (ret >= 0)) { - chip->is_present = (ret >= 0); + sbs_update_presence(chip, (ret >= 0)); power_supply_changed(chip->power_supply); } @@ -745,7 +912,7 @@ static void sbs_supply_changed(struct sbs_info *chip) ret = gpiod_get_value_cansleep(chip->gpio_detect); if (ret < 0) return; - chip->is_present = ret; + sbs_update_presence(chip, ret); power_supply_changed(battery); } @@ -815,8 +982,7 @@ static const struct power_supply_desc sbs_default_desc = { .external_power_changed = sbs_external_power_changed, }; -static int sbs_probe(struct i2c_client *client, - const struct i2c_device_id *id) +static int sbs_probe(struct i2c_client *client) { struct sbs_info *chip; struct power_supply_desc *sbs_desc; @@ -839,7 +1005,7 @@ static int sbs_probe(struct i2c_client *client, if (!chip) return -ENOMEM; - chip->flags = (u32)(uintptr_t)of_device_get_match_data(&client->dev); + chip->flags = (u32)(uintptr_t)device_get_match_data(&client->dev); chip->client = client; chip->enable_detection = false; psy_cfg.of_node = client->dev.of_node; @@ -850,13 +1016,13 @@ static int sbs_probe(struct i2c_client *client, /* use pdata if available, fall back to DT properties, * or hardcoded defaults if not */ - rc = of_property_read_u32(client->dev.of_node, "sbs,i2c-retry-count", - &chip->i2c_retry_count); + rc = device_property_read_u32(&client->dev, "sbs,i2c-retry-count", + &chip->i2c_retry_count); if (rc) chip->i2c_retry_count = 0; - rc = of_property_read_u32(client->dev.of_node, "sbs,poll-retry-count", - &chip->poll_retry_count); + rc = device_property_read_u32(&client->dev, "sbs,poll-retry-count", + &chip->poll_retry_count); if (rc) chip->poll_retry_count = 0; @@ -866,6 +1032,9 @@ static int sbs_probe(struct i2c_client *client, } chip->i2c_retry_count = chip->i2c_retry_count + 1; + chip->charger_broadcasts = !device_property_read_bool(&client->dev, + "sbs,disable-charger-broadcasts"); + chip->gpio_detect = devm_gpiod_get_optional(&client->dev, "sbs,battery-detect", GPIOD_IN); if (IS_ERR(chip->gpio_detect)) { @@ -950,7 +1119,7 @@ static int sbs_suspend(struct device *dev) if (chip->poll_time > 0) cancel_delayed_work_sync(&chip->work); - if (chip->flags & SBS_FLAGS_TI_BQ20Z75) { + if (chip->flags & SBS_FLAGS_TI_BQ20ZX5) { /* Write to manufacturer access with sleep command. */ ret = sbs_write_word_data(client, sbs_data[REG_MANUFACTURER_DATA].addr, @@ -970,6 +1139,7 @@ static SIMPLE_DEV_PM_OPS(sbs_pm_ops, sbs_suspend, NULL); #endif static const struct i2c_device_id sbs_id[] = { + { "bq20z65", 0 }, { "bq20z75", 0 }, { "sbs-battery", 1 }, {} @@ -979,15 +1149,19 @@ MODULE_DEVICE_TABLE(i2c, sbs_id); static const struct of_device_id sbs_dt_ids[] = { { .compatible = "sbs,sbs-battery" }, { + .compatible = "ti,bq20z65", + .data = (void *)SBS_FLAGS_TI_BQ20ZX5, + }, + { .compatible = "ti,bq20z75", - .data = (void *)SBS_FLAGS_TI_BQ20Z75, + .data = (void *)SBS_FLAGS_TI_BQ20ZX5, }, { } }; MODULE_DEVICE_TABLE(of, sbs_dt_ids); static struct i2c_driver sbs_battery_driver = { - .probe = sbs_probe, + .probe_new = sbs_probe, .remove = sbs_remove, .alert = sbs_alert, .id_table = sbs_id, diff --git a/drivers/power/supply/sc27xx_fuel_gauge.c b/drivers/power/supply/sc27xx_fuel_gauge.c index a7c8a8453db1..be42e814ea34 100644 --- a/drivers/power/supply/sc27xx_fuel_gauge.c +++ b/drivers/power/supply/sc27xx_fuel_gauge.c @@ -42,6 +42,8 @@ #define SC27XX_FGU_USER_AREA_SET 0xa0 #define SC27XX_FGU_USER_AREA_CLEAR 0xa4 #define SC27XX_FGU_USER_AREA_STATUS 0xa8 +#define SC27XX_FGU_VOLTAGE_BUF 0xd0 +#define SC27XX_FGU_CURRENT_BUF 0xf0 #define SC27XX_WRITE_SELCLB_EN BIT(0) #define SC27XX_FGU_CLBCNT_MASK GENMASK(15, 0) @@ -82,6 +84,7 @@ * @init_clbcnt: the initial coulomb counter * @max_volt: the maximum constant input voltage in millivolt * @min_volt: the minimum drained battery voltage in microvolt + * @boot_volt: the voltage measured during boot in microvolt * @table_len: the capacity table length * @resist_table_len: the resistance table length * @cur_1000ma_adc: ADC value corresponding to 1000 mA @@ -107,6 +110,7 @@ struct sc27xx_fgu_data { int init_clbcnt; int max_volt; int min_volt; + int boot_volt; int table_len; int resist_table_len; int cur_1000ma_adc; @@ -319,6 +323,7 @@ static int sc27xx_fgu_get_boot_capacity(struct sc27xx_fgu_data *data, int *cap) volt = sc27xx_fgu_adc_to_voltage(data, volt); ocv = volt * 1000 - oci * data->internal_resist; + data->boot_volt = ocv; /* * Parse the capacity table to look up the correct capacity percent @@ -376,6 +381,44 @@ static int sc27xx_fgu_get_clbcnt(struct sc27xx_fgu_data *data, int *clb_cnt) return 0; } +static int sc27xx_fgu_get_vol_now(struct sc27xx_fgu_data *data, int *val) +{ + int ret; + u32 vol; + + ret = regmap_read(data->regmap, data->base + SC27XX_FGU_VOLTAGE_BUF, + &vol); + if (ret) + return ret; + + /* + * It is ADC values reading from registers which need to convert to + * corresponding voltage values. + */ + *val = sc27xx_fgu_adc_to_voltage(data, vol); + + return 0; +} + +static int sc27xx_fgu_get_cur_now(struct sc27xx_fgu_data *data, int *val) +{ + int ret; + u32 cur; + + ret = regmap_read(data->regmap, data->base + SC27XX_FGU_CURRENT_BUF, + &cur); + if (ret) + return ret; + + /* + * It is ADC values reading from registers which need to convert to + * corresponding current values. + */ + *val = sc27xx_fgu_adc_to_current(data, cur - SC27XX_FGU_CUR_BASIC_ADC); + + return 0; +} + static int sc27xx_fgu_get_capacity(struct sc27xx_fgu_data *data, int *cap) { int ret, cur_clbcnt, delta_clbcnt, delta_cap, temp; @@ -577,7 +620,7 @@ static int sc27xx_fgu_get_property(struct power_supply *psy, val->intval = value; break; - case POWER_SUPPLY_PROP_VOLTAGE_NOW: + case POWER_SUPPLY_PROP_VOLTAGE_AVG: ret = sc27xx_fgu_get_vbat_vol(data, &value); if (ret) goto error; @@ -601,7 +644,6 @@ static int sc27xx_fgu_get_property(struct power_supply *psy, val->intval = value; break; - case POWER_SUPPLY_PROP_CURRENT_NOW: case POWER_SUPPLY_PROP_CURRENT_AVG: ret = sc27xx_fgu_get_current(data, &value); if (ret) @@ -625,6 +667,26 @@ static int sc27xx_fgu_get_property(struct power_supply *psy, break; + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + ret = sc27xx_fgu_get_vol_now(data, &value); + if (ret) + goto error; + + val->intval = value * 1000; + break; + + case POWER_SUPPLY_PROP_CURRENT_NOW: + ret = sc27xx_fgu_get_cur_now(data, &value); + if (ret) + goto error; + + val->intval = value * 1000; + break; + + case POWER_SUPPLY_PROP_VOLTAGE_BOOT: + val->intval = data->boot_volt; + break; + default: ret = -EINVAL; break; @@ -656,6 +718,11 @@ static int sc27xx_fgu_set_property(struct power_supply *psy, ret = 0; break; + case POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN: + data->total_cap = val->intval / 1000; + ret = 0; + break; + default: ret = -EINVAL; } @@ -676,7 +743,8 @@ static int sc27xx_fgu_property_is_writeable(struct power_supply *psy, enum power_supply_property psp) { return psp == POWER_SUPPLY_PROP_CAPACITY || - psp == POWER_SUPPLY_PROP_CALIBRATE; + psp == POWER_SUPPLY_PROP_CALIBRATE || + psp == POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN; } static enum power_supply_property sc27xx_fgu_props[] = { @@ -688,6 +756,8 @@ static enum power_supply_property sc27xx_fgu_props[] = { POWER_SUPPLY_PROP_CAPACITY, POWER_SUPPLY_PROP_VOLTAGE_NOW, POWER_SUPPLY_PROP_VOLTAGE_OCV, + POWER_SUPPLY_PROP_VOLTAGE_AVG, + POWER_SUPPLY_PROP_VOLTAGE_BOOT, POWER_SUPPLY_PROP_CURRENT_NOW, POWER_SUPPLY_PROP_CURRENT_AVG, POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE, @@ -705,6 +775,7 @@ static const struct power_supply_desc sc27xx_fgu_desc = { .set_property = sc27xx_fgu_set_property, .external_power_changed = sc27xx_fgu_external_power_changed, .property_is_writeable = sc27xx_fgu_property_is_writeable, + .no_thermal = true, }; static void sc27xx_fgu_adjust_cap(struct sc27xx_fgu_data *data, int cap) diff --git a/drivers/power/supply/smb347-charger.c b/drivers/power/supply/smb347-charger.c index c1d124b8be0c..f99026d81f2a 100644 --- a/drivers/power/supply/smb347-charger.c +++ b/drivers/power/supply/smb347-charger.c @@ -8,6 +8,7 @@ * Mika Westerberg <mika.westerberg@linux.intel.com> */ +#include <linux/delay.h> #include <linux/err.h> #include <linux/gpio.h> #include <linux/kernel.h> @@ -708,6 +709,9 @@ static irqreturn_t smb347_interrupt(int irq, void *data) bool handled = false; int ret; + /* SMB347 it needs at least 20ms for setting IRQSTAT_E_*IN_UV_IRQ */ + usleep_range(25000, 35000); + ret = regmap_read(smb->regmap, STAT_C, &stat_c); if (ret < 0) { dev_warn(smb->dev, "reading STAT_C failed\n"); @@ -1138,6 +1142,7 @@ static bool smb347_volatile_reg(struct device *dev, unsigned int reg) switch (reg) { case IRQSTAT_A: case IRQSTAT_C: + case IRQSTAT_D: case IRQSTAT_E: case IRQSTAT_F: case STAT_A: |