diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/pci/controller/cadence/pcie-cadence.h | 2 | ||||
| -rw-r--r-- | drivers/pci/controller/pcie-mediatek-gen3.c | 2 | ||||
| -rw-r--r-- | drivers/pci/endpoint/functions/pci-epf-ntb.c | 2 | ||||
| -rw-r--r-- | drivers/pci/of.c | 2 | ||||
| -rw-r--r-- | drivers/pci/quirks.c | 4 |
5 files changed, 6 insertions, 6 deletions
diff --git a/drivers/pci/controller/cadence/pcie-cadence.h b/drivers/pci/controller/cadence/pcie-cadence.h index 262421e5d917..c8a27b6290ce 100644 --- a/drivers/pci/controller/cadence/pcie-cadence.h +++ b/drivers/pci/controller/cadence/pcie-cadence.h @@ -310,7 +310,7 @@ struct cdns_pcie { * single function at a time * @vendor_id: PCI vendor ID * @device_id: PCI device ID - * @avail_ib_bar: Satus of RP_BAR0, RP_BAR1 and RP_NO_BAR if it's free or + * @avail_ib_bar: Status of RP_BAR0, RP_BAR1 and RP_NO_BAR if it's free or * available * @quirk_retrain_flag: Retrain link as quirk for PCIe Gen2 * @quirk_detect_quiet_flag: LTSSM Detect Quiet min delay set as quirk diff --git a/drivers/pci/controller/pcie-mediatek-gen3.c b/drivers/pci/controller/pcie-mediatek-gen3.c index 17c59b0d6978..7de82da0bd6d 100644 --- a/drivers/pci/controller/pcie-mediatek-gen3.c +++ b/drivers/pci/controller/pcie-mediatek-gen3.c @@ -303,7 +303,7 @@ static int mtk_pcie_startup_port(struct mtk_pcie_port *port) writel_relaxed(val, port->base + PCIE_RST_CTRL_REG); /* - * Described in PCIe CEM specification setctions 2.2 (PERST# Signal) + * Described in PCIe CEM specification sections 2.2 (PERST# Signal) * and 2.2.1 (Initial Power-Up (G3 to S0)). * The deassertion of PERST# should be delayed 100ms (TPVPERL) * for the power and clock to become stable. diff --git a/drivers/pci/endpoint/functions/pci-epf-ntb.c b/drivers/pci/endpoint/functions/pci-epf-ntb.c index 5a03401f4571..9a00448c7e61 100644 --- a/drivers/pci/endpoint/functions/pci-epf-ntb.c +++ b/drivers/pci/endpoint/functions/pci-epf-ntb.c @@ -1262,7 +1262,7 @@ static void epf_ntb_db_mw_bar_cleanup(struct epf_ntb *ntb, } /** - * epf_ntb_configure_interrupt() - Configure MSI/MSI-X capaiblity + * epf_ntb_configure_interrupt() - Configure MSI/MSI-X capability * @ntb: NTB device that facilitates communication between HOST1 and HOST2 * @type: PRIMARY interface or SECONDARY interface * diff --git a/drivers/pci/of.c b/drivers/pci/of.c index 0b1237cff239..cb2e8351c2cc 100644 --- a/drivers/pci/of.c +++ b/drivers/pci/of.c @@ -247,7 +247,7 @@ void of_pci_check_probe_only(void) else pci_clear_flags(PCI_PROBE_ONLY); - pr_info("PROBE_ONLY %sabled\n", val ? "en" : "dis"); + pr_info("PROBE_ONLY %s\n", val ? "enabled" : "disabled"); } EXPORT_SYMBOL_GPL(of_pci_check_probe_only); diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 003950c738d2..b326c2ce5cce 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -980,8 +980,8 @@ static void quirk_via_ioapic(struct pci_dev *dev) else tmp = 0x1f; /* all known bits (4-0) routed to external APIC */ - pci_info(dev, "%sbling VIA external APIC routing\n", - tmp == 0 ? "Disa" : "Ena"); + pci_info(dev, "%s VIA external APIC routing\n", + tmp ? "Enabling" : "Disabling"); /* Offset 0x58: External APIC IRQ output control */ pci_write_config_byte(dev, 0x58, tmp); |