diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/acpi/Makefile | 1 | ||||
| -rw-r--r-- | drivers/acpi/acpi_apd.c | 12 | ||||
| -rw-r--r-- | drivers/acpi/acpi_lpss.c | 17 | ||||
| -rw-r--r-- | drivers/acpi/bus.c | 5 | ||||
| -rw-r--r-- | drivers/acpi/pmic/intel_pmic_xpower.c | 50 | ||||
| -rw-r--r-- | drivers/acpi/power.c | 10 | ||||
| -rw-r--r-- | drivers/acpi/sleep.c | 1 | ||||
| -rw-r--r-- | drivers/acpi/sleep.h | 1 | ||||
| -rw-r--r-- | drivers/acpi/x86/utils.c | 90 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-designware-platdrv.c | 2 |
10 files changed, 164 insertions, 25 deletions
diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile index d78065cc9324..b1aacfc62b1f 100644 --- a/drivers/acpi/Makefile +++ b/drivers/acpi/Makefile @@ -50,6 +50,7 @@ acpi-$(CONFIG_ACPI_REDUCED_HARDWARE_ONLY) += evged.o acpi-y += sysfs.o acpi-y += property.o acpi-$(CONFIG_X86) += acpi_cmos_rtc.o +acpi-$(CONFIG_X86) += x86/utils.o acpi-$(CONFIG_DEBUG_FS) += debugfs.o acpi-$(CONFIG_ACPI_NUMA) += numa.o acpi-$(CONFIG_ACPI_PROCFS_POWER) += cm_sbs.o diff --git a/drivers/acpi/acpi_apd.c b/drivers/acpi/acpi_apd.c index 26696b693e63..8f57648f318b 100644 --- a/drivers/acpi/acpi_apd.c +++ b/drivers/acpi/acpi_apd.c @@ -106,6 +106,16 @@ static const struct apd_device_desc vulcan_spi_desc = { .setup = acpi_apd_setup, .fixed_clk_rate = 133000000, }; + +static const struct apd_device_desc hip07_i2c_desc = { + .setup = acpi_apd_setup, + .fixed_clk_rate = 200000000, +}; + +static const struct apd_device_desc hip08_i2c_desc = { + .setup = acpi_apd_setup, + .fixed_clk_rate = 250000000, +}; #endif #else @@ -169,6 +179,8 @@ static const struct acpi_device_id acpi_apd_device_ids[] = { #ifdef CONFIG_ARM64 { "APMC0D0F", APD_ADDR(xgene_i2c_desc) }, { "BRCM900D", APD_ADDR(vulcan_spi_desc) }, + { "HISI0A21", APD_ADDR(hip07_i2c_desc) }, + { "HISI0A22", APD_ADDR(hip08_i2c_desc) }, #endif { } }; diff --git a/drivers/acpi/acpi_lpss.c b/drivers/acpi/acpi_lpss.c index 5edfd9c49044..10347e3d73ad 100644 --- a/drivers/acpi/acpi_lpss.c +++ b/drivers/acpi/acpi_lpss.c @@ -143,6 +143,22 @@ static void lpss_deassert_reset(struct lpss_private_data *pdata) writel(val, pdata->mmio_base + offset); } +/* + * BYT PWM used for backlight control by the i915 driver on systems without + * the Crystal Cove PMIC. + */ +static struct pwm_lookup byt_pwm_lookup[] = { + PWM_LOOKUP_WITH_MODULE("80860F09:00", 0, "0000:00:02.0", + "pwm_backlight", 0, PWM_POLARITY_NORMAL, + "pwm-lpss-platform"), +}; + +static void byt_pwm_setup(struct lpss_private_data *pdata) +{ + if (!acpi_dev_present("INT33FD", NULL, -1)) + pwm_add_table(byt_pwm_lookup, ARRAY_SIZE(byt_pwm_lookup)); +} + #define LPSS_I2C_ENABLE 0x6c static void byt_i2c_setup(struct lpss_private_data *pdata) @@ -200,6 +216,7 @@ static const struct lpss_device_desc lpt_sdio_dev_desc = { static const struct lpss_device_desc byt_pwm_dev_desc = { .flags = LPSS_SAVE_CTX, + .setup = byt_pwm_setup, }; static const struct lpss_device_desc bsw_pwm_dev_desc = { diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c index 34fbe027e73a..784bda663d16 100644 --- a/drivers/acpi/bus.c +++ b/drivers/acpi/bus.c @@ -114,6 +114,11 @@ int acpi_bus_get_status(struct acpi_device *device) acpi_status status; unsigned long long sta; + if (acpi_device_always_present(device)) { + acpi_set_device_status(device, ACPI_STA_DEFAULT); + return 0; + } + status = acpi_bus_get_status_handle(device->handle, &sta); if (ACPI_FAILURE(status)) return -ENODEV; diff --git a/drivers/acpi/pmic/intel_pmic_xpower.c b/drivers/acpi/pmic/intel_pmic_xpower.c index 55f51115f016..1a76c784cd4c 100644 --- a/drivers/acpi/pmic/intel_pmic_xpower.c +++ b/drivers/acpi/pmic/intel_pmic_xpower.c @@ -27,97 +27,97 @@ static struct pmic_table power_table[] = { .address = 0x00, .reg = 0x13, .bit = 0x05, - }, + }, /* ALD1 */ { .address = 0x04, .reg = 0x13, .bit = 0x06, - }, + }, /* ALD2 */ { .address = 0x08, .reg = 0x13, .bit = 0x07, - }, + }, /* ALD3 */ { .address = 0x0c, .reg = 0x12, .bit = 0x03, - }, + }, /* DLD1 */ { .address = 0x10, .reg = 0x12, .bit = 0x04, - }, + }, /* DLD2 */ { .address = 0x14, .reg = 0x12, .bit = 0x05, - }, + }, /* DLD3 */ { .address = 0x18, .reg = 0x12, .bit = 0x06, - }, + }, /* DLD4 */ { .address = 0x1c, .reg = 0x12, .bit = 0x00, - }, + }, /* ELD1 */ { .address = 0x20, .reg = 0x12, .bit = 0x01, - }, + }, /* ELD2 */ { .address = 0x24, .reg = 0x12, .bit = 0x02, - }, + }, /* ELD3 */ { .address = 0x28, .reg = 0x13, .bit = 0x02, - }, + }, /* FLD1 */ { .address = 0x2c, .reg = 0x13, .bit = 0x03, - }, + }, /* FLD2 */ { .address = 0x30, .reg = 0x13, .bit = 0x04, - }, + }, /* FLD3 */ { - .address = 0x38, + .address = 0x34, .reg = 0x10, .bit = 0x03, - }, + }, /* BUC1 */ { - .address = 0x3c, + .address = 0x38, .reg = 0x10, .bit = 0x06, - }, + }, /* BUC2 */ { - .address = 0x40, + .address = 0x3c, .reg = 0x10, .bit = 0x05, - }, + }, /* BUC3 */ { - .address = 0x44, + .address = 0x40, .reg = 0x10, .bit = 0x04, - }, + }, /* BUC4 */ { - .address = 0x48, + .address = 0x44, .reg = 0x10, .bit = 0x01, - }, + }, /* BUC5 */ { - .address = 0x4c, + .address = 0x48, .reg = 0x10, .bit = 0x00 - }, + }, /* BUC6 */ }; /* TMP0 - TMP5 are the same, all from GPADC */ diff --git a/drivers/acpi/power.c b/drivers/acpi/power.c index 1c2b846c5776..3a6c9b741b23 100644 --- a/drivers/acpi/power.c +++ b/drivers/acpi/power.c @@ -864,6 +864,16 @@ void acpi_resume_power_resources(void) mutex_unlock(&resource->resource_lock); } + + mutex_unlock(&power_resource_list_lock); +} + +void acpi_turn_off_unused_power_resources(void) +{ + struct acpi_power_resource *resource; + + mutex_lock(&power_resource_list_lock); + list_for_each_entry_reverse(resource, &acpi_power_resource_list, list_node) { int result, state; diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c index a4327af676fe..097d630ab886 100644 --- a/drivers/acpi/sleep.c +++ b/drivers/acpi/sleep.c @@ -474,6 +474,7 @@ static void acpi_pm_start(u32 acpi_state) */ static void acpi_pm_end(void) { + acpi_turn_off_unused_power_resources(); acpi_scan_lock_release(); /* * This is necessary in case acpi_pm_finish() is not called during a diff --git a/drivers/acpi/sleep.h b/drivers/acpi/sleep.h index a9cc34e663f9..a82ff74faf7a 100644 --- a/drivers/acpi/sleep.h +++ b/drivers/acpi/sleep.h @@ -6,6 +6,7 @@ extern struct list_head acpi_wakeup_device_list; extern struct mutex acpi_device_lock; extern void acpi_resume_power_resources(void); +extern void acpi_turn_off_unused_power_resources(void); static inline acpi_status acpi_set_waking_vector(u32 wakeup_address) { diff --git a/drivers/acpi/x86/utils.c b/drivers/acpi/x86/utils.c new file mode 100644 index 000000000000..bd86b809c848 --- /dev/null +++ b/drivers/acpi/x86/utils.c @@ -0,0 +1,90 @@ +/* + * X86 ACPI Utility Functions + * + * Copyright (C) 2017 Hans de Goede <hdegoede@redhat.com> + * + * Based on various non upstream patches to support the CHT Whiskey Cove PMIC: + * Copyright (C) 2013-2015 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/acpi.h> +#include <asm/cpu_device_id.h> +#include <asm/intel-family.h> +#include "../internal.h" + +/* + * Some ACPI devices are hidden (status == 0x0) in recent BIOS-es because + * some recent Windows drivers bind to one device but poke at multiple + * devices at the same time, so the others get hidden. + * We work around this by always reporting ACPI_STA_DEFAULT for these + * devices. Note this MUST only be done for devices where this is safe. + * + * This forcing of devices to be present is limited to specific CPU (SoC) + * models both to avoid potentially causing trouble on other models and + * because some HIDs are re-used on different SoCs for completely + * different devices. + */ +struct always_present_id { + struct acpi_device_id hid[2]; + struct x86_cpu_id cpu_ids[2]; + const char *uid; +}; + +#define ICPU(model) { X86_VENDOR_INTEL, 6, model, X86_FEATURE_ANY, } + +#define ENTRY(hid, uid, cpu_models) { \ + { { hid, }, {} }, \ + { cpu_models, {} }, \ + uid, \ +} + +static const struct always_present_id always_present_ids[] = { + /* + * Bay / Cherry Trail PWM directly poked by GPU driver in win10, + * but Linux uses a separate PWM driver, harmless if not used. + */ + ENTRY("80860F09", "1", ICPU(INTEL_FAM6_ATOM_SILVERMONT1)), + ENTRY("80862288", "1", ICPU(INTEL_FAM6_ATOM_AIRMONT)), + /* + * The INT0002 device is necessary to clear wakeup interrupt sources + * on Cherry Trail devices, without it we get nobody cared IRQ msgs. + */ + ENTRY("INT0002", "1", ICPU(INTEL_FAM6_ATOM_AIRMONT)), +}; + +bool acpi_device_always_present(struct acpi_device *adev) +{ + u32 *status = (u32 *)&adev->status; + u32 old_status = *status; + bool ret = false; + unsigned int i; + + /* acpi_match_device_ids checks status, so set it to default */ + *status = ACPI_STA_DEFAULT; + for (i = 0; i < ARRAY_SIZE(always_present_ids); i++) { + if (acpi_match_device_ids(adev, always_present_ids[i].hid)) + continue; + + if (!adev->pnp.unique_id || + strcmp(adev->pnp.unique_id, always_present_ids[i].uid)) + continue; + + if (!x86_match_cpu(always_present_ids[i].cpu_ids)) + continue; + + if (old_status != ACPI_STA_DEFAULT) /* Log only once */ + dev_info(&adev->dev, + "Device [%s] is in always present list\n", + adev->pnp.bus_id); + + ret = true; + break; + } + *status = old_status; + + return ret; +} diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c index 79c4b4ea0539..90c7c101b7fd 100644 --- a/drivers/i2c/busses/i2c-designware-platdrv.c +++ b/drivers/i2c/busses/i2c-designware-platdrv.c @@ -129,6 +129,8 @@ static const struct acpi_device_id dw_i2c_acpi_match[] = { { "AMDI0010", ACCESS_INTR_MASK }, { "AMDI0510", 0 }, { "APMC0D0F", 0 }, + { "HISI02A1", 0 }, + { "HISI02A2", 0 }, { } }; MODULE_DEVICE_TABLE(acpi, dw_i2c_acpi_match); |