22 files changed, 535 insertions, 141 deletions

diff --git a/drivers/leds/leds-pwm.c b/drivers/leds/leds-pwm.c
index 7d0aaed1e23a..aa770ec1e892 100644
--- a/drivers/leds/leds-pwm.c
+++ b/drivers/leds/leds-pwm.c
@@ -181,7 +181,6 @@ static int led_pwm_probe(struct platform_device *pdev)
 			led_dat->cdev.name = cur_led->name;
 			led_dat->cdev.default_trigger = cur_led->default_trigger;
 			led_dat->active_low = cur_led->active_low;
-			led_dat->period = cur_led->pwm_period_ns;
 			led_dat->cdev.brightness_set = led_pwm_set;
 			led_dat->cdev.brightness = LED_OFF;
 			led_dat->cdev.max_brightness = cur_led->max_brightness;
@@ -191,6 +190,10 @@ static int led_pwm_probe(struct platform_device *pdev)
 			if (led_dat->can_sleep)
 				INIT_WORK(&led_dat->work, led_pwm_work);
 
+			led_dat->period = pwm_get_period(led_dat->pwm);
+			if (!led_dat->period && (cur_led->pwm_period_ns > 0))
+				led_dat->period = cur_led->pwm_period_ns;
+
 			ret = led_classdev_register(&pdev->dev, &led_dat->cdev);
 			if (ret < 0)
 				goto err;
diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
index 5b34ff29ea38..4ad7b89a4cb4 100644
--- a/drivers/pwm/Kconfig
+++ b/drivers/pwm/Kconfig
@@ -62,6 +62,15 @@ config PWM_ATMEL_TCB
 	  To compile this driver as a module, choose M here: the module
 	  will be called pwm-atmel-tcb.
 
+config PWM_BCM_KONA
+	tristate "Kona PWM support"
+	depends on ARCH_BCM_MOBILE
+	help
+	  Generic PWM framework driver for Broadcom Kona PWM block.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-bcm-kona.
+
 config PWM_BFIN
 	tristate "Blackfin PWM support"
 	depends on BFIN_GPTIMERS
diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile
index e57d2c38a794..5c86a19d5d39 100644
--- a/drivers/pwm/Makefile
+++ b/drivers/pwm/Makefile
@@ -3,6 +3,7 @@ obj-$(CONFIG_PWM_SYSFS)		+= sysfs.o
 obj-$(CONFIG_PWM_AB8500)	+= pwm-ab8500.o
 obj-$(CONFIG_PWM_ATMEL)		+= pwm-atmel.o
 obj-$(CONFIG_PWM_ATMEL_TCB)	+= pwm-atmel-tcb.o
+obj-$(CONFIG_PWM_BCM_KONA)	+= pwm-bcm-kona.o
 obj-$(CONFIG_PWM_BFIN)		+= pwm-bfin.o
 obj-$(CONFIG_PWM_CLPS711X)	+= pwm-clps711x.o
 obj-$(CONFIG_PWM_EP93XX)	+= pwm-ep93xx.o
diff --git a/drivers/pwm/core.c b/drivers/pwm/core.c
index a80471399c20..4b66bf09ee55 100644
--- a/drivers/pwm/core.c
+++ b/drivers/pwm/core.c
@@ -661,10 +661,16 @@ struct pwm_device *pwm_get(struct device *dev, const char *con_id)
 		}
 	}
 
+	mutex_unlock(&pwm_lookup_lock);
+
 	if (chip)
 		pwm = pwm_request_from_chip(chip, index, con_id ?: dev_id);
+	if (IS_ERR(pwm))
+		return pwm;
+
+	pwm_set_period(pwm, p->period);
+	pwm_set_polarity(pwm, p->polarity);
 
-	mutex_unlock(&pwm_lookup_lock);
 
 	return pwm;
 }
diff --git a/drivers/pwm/pwm-ab8500.c b/drivers/pwm/pwm-ab8500.c
index 1d07a6f99375..4c07a8420b37 100644
--- a/drivers/pwm/pwm-ab8500.c
+++ b/drivers/pwm/pwm-ab8500.c
@@ -20,10 +20,6 @@
 #define AB8500_PWM_OUT_CTRL2_REG	0x61
 #define AB8500_PWM_OUT_CTRL7_REG	0x66
 
-/* backlight driver constants */
-#define ENABLE_PWM			1
-#define DISABLE_PWM			0
-
 struct ab8500_pwm_chip {
 	struct pwm_chip chip;
 };
@@ -64,7 +60,7 @@ static int ab8500_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
 
 	ret = abx500_mask_and_set_register_interruptible(chip->dev,
 				AB8500_MISC, AB8500_PWM_OUT_CTRL7_REG,
-				1 << (chip->base - 1), ENABLE_PWM);
+				1 << (chip->base - 1), 1 << (chip->base - 1));
 	if (ret < 0)
 		dev_err(chip->dev, "%s: Failed to enable PWM, Error %d\n",
 							pwm->label, ret);
@@ -77,11 +73,10 @@ static void ab8500_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
 
 	ret = abx500_mask_and_set_register_interruptible(chip->dev,
 				AB8500_MISC, AB8500_PWM_OUT_CTRL7_REG,
-				1 << (chip->base - 1), DISABLE_PWM);
+				1 << (chip->base - 1), 0);
 	if (ret < 0)
 		dev_err(chip->dev, "%s: Failed to disable PWM, Error %d\n",
 							pwm->label, ret);
-	return;
 }
 
 static const struct pwm_ops ab8500_pwm_ops = {
@@ -101,10 +96,8 @@ static int ab8500_pwm_probe(struct platform_device *pdev)
 	 * device which is required for ab8500 read and write
 	 */
 	ab8500 = devm_kzalloc(&pdev->dev, sizeof(*ab8500), GFP_KERNEL);
-	if (ab8500 == NULL) {
-		dev_err(&pdev->dev, "failed to allocate memory\n");
+	if (ab8500 == NULL)
 		return -ENOMEM;
-	}
 
 	ab8500->chip.dev = &pdev->dev;
 	ab8500->chip.ops = &ab8500_pwm_ops;
diff --git a/drivers/pwm/pwm-atmel.c b/drivers/pwm/pwm-atmel.c
index 0adc952cc4ef..6e700a541ca3 100644
--- a/drivers/pwm/pwm-atmel.c
+++ b/drivers/pwm/pwm-atmel.c
@@ -357,6 +357,7 @@ static int atmel_pwm_probe(struct platform_device *pdev)
 
 	atmel_pwm->chip.base = -1;
 	atmel_pwm->chip.npwm = 4;
+	atmel_pwm->chip.can_sleep = true;
 	atmel_pwm->config = data->config;
 
 	ret = pwmchip_add(&atmel_pwm->chip);
diff --git a/drivers/pwm/pwm-bcm-kona.c b/drivers/pwm/pwm-bcm-kona.c
new file mode 100644
index 000000000000..02bc048892a9
--- /dev/null
+++ b/drivers/pwm/pwm-bcm-kona.c
@@ -0,0 +1,318 @@
+/*
+ * Copyright (C) 2014 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/math64.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+
+/*
+ * The Kona PWM has some unusual characteristics.  Here are the main points.
+ *
+ * 1) There is no disable bit and the hardware docs advise programming a zero
+ *    duty to achieve output equivalent to that of a normal disable operation.
+ *
+ * 2) Changes to prescale, duty, period, and polarity do not take effect until
+ *    a subsequent rising edge of the trigger bit.
+ *
+ * 3) If the smooth bit and trigger bit are both low, the output is a constant
+ *    high signal.  Otherwise, the earlier waveform continues to be output.
+ *
+ * 4) If the smooth bit is set on the rising edge of the trigger bit, output
+ *    will transition to the new settings on a period boundary (which could be
+ *    seconds away).  If the smooth bit is clear, new settings will be applied
+ *    as soon as possible (the hardware always has a 400ns delay).
+ *
+ * 5) When the external clock that feeds the PWM is disabled, output is pegged
+ *    high or low depending on its state at that exact instant.
+ */
+
+#define PWM_CONTROL_OFFSET			(0x00000000)
+#define PWM_CONTROL_SMOOTH_SHIFT(chan)		(24 + (chan))
+#define PWM_CONTROL_TYPE_SHIFT(chan)		(16 + (chan))
+#define PWM_CONTROL_POLARITY_SHIFT(chan)	(8 + (chan))
+#define PWM_CONTROL_TRIGGER_SHIFT(chan)		(chan)
+
+#define PRESCALE_OFFSET				(0x00000004)
+#define PRESCALE_SHIFT(chan)			((chan) << 2)
+#define PRESCALE_MASK(chan)			(0x7 << PRESCALE_SHIFT(chan))
+#define PRESCALE_MIN				(0x00000000)
+#define PRESCALE_MAX				(0x00000007)
+
+#define PERIOD_COUNT_OFFSET(chan)		(0x00000008 + ((chan) << 3))
+#define PERIOD_COUNT_MIN			(0x00000002)
+#define PERIOD_COUNT_MAX			(0x00ffffff)
+
+#define DUTY_CYCLE_HIGH_OFFSET(chan)		(0x0000000c + ((chan) << 3))
+#define DUTY_CYCLE_HIGH_MIN			(0x00000000)
+#define DUTY_CYCLE_HIGH_MAX			(0x00ffffff)
+
+struct kona_pwmc {
+	struct pwm_chip chip;
+	void __iomem *base;
+	struct clk *clk;
+};
+
+static inline struct kona_pwmc *to_kona_pwmc(struct pwm_chip *_chip)
+{
+	return container_of(_chip, struct kona_pwmc, chip);
+}
+
+static void kona_pwmc_apply_settings(struct kona_pwmc *kp, unsigned int chan)
+{
+	unsigned int value = readl(kp->base + PWM_CONTROL_OFFSET);
+
+	/* Clear trigger bit but set smooth bit to maintain old output */
+	value |= 1 << PWM_CONTROL_SMOOTH_SHIFT(chan);
+	value &= ~(1 << PWM_CONTROL_TRIGGER_SHIFT(chan));
+	writel(value, kp->base + PWM_CONTROL_OFFSET);
+
+	/* Set trigger bit and clear smooth bit to apply new settings */
+	value &= ~(1 << PWM_CONTROL_SMOOTH_SHIFT(chan));
+	value |= 1 << PWM_CONTROL_TRIGGER_SHIFT(chan);
+	writel(value, kp->base + PWM_CONTROL_OFFSET);
+}
+
+static int kona_pwmc_config(struct pwm_chip *chip, struct pwm_device *pwm,
+			    int duty_ns, int period_ns)
+{
+	struct kona_pwmc *kp = to_kona_pwmc(chip);
+	u64 val, div, rate;
+	unsigned long prescale = PRESCALE_MIN, pc, dc;
+	unsigned int value, chan = pwm->hwpwm;
+
+	/*
+	 * Find period count, duty count and prescale to suit duty_ns and
+	 * period_ns. This is done according to formulas described below:
+	 *
+	 * period_ns = 10^9 * (PRESCALE + 1) * PC / PWM_CLK_RATE
+	 * duty_ns = 10^9 * (PRESCALE + 1) * DC / PWM_CLK_RATE
+	 *
+	 * PC = (PWM_CLK_RATE * period_ns) / (10^9 * (PRESCALE + 1))
+	 * DC = (PWM_CLK_RATE * duty_ns) / (10^9 * (PRESCALE + 1))
+	 */
+
+	rate = clk_get_rate(kp->clk);
+
+	while (1) {
+		div = 1000000000;
+		div *= 1 + prescale;
+		val = rate * period_ns;
+		pc = div64_u64(val, div);
+		val = rate * duty_ns;
+		dc = div64_u64(val, div);
+
+		/* If duty_ns or period_ns are not achievable then return */
+		if (pc < PERIOD_COUNT_MIN || dc < DUTY_CYCLE_HIGH_MIN)
+			return -EINVAL;
+
+		/* If pc and dc are in bounds, the calculation is done */
+		if (pc <= PERIOD_COUNT_MAX && dc <= DUTY_CYCLE_HIGH_MAX)
+			break;
+
+		/* Otherwise, increase prescale and recalculate pc and dc */
+		if (++prescale > PRESCALE_MAX)
+			return -EINVAL;
+	}
+
+	/* If the PWM channel is enabled, write the settings to the HW */
+	if (test_bit(PWMF_ENABLED, &pwm->flags)) {
+		value = readl(kp->base + PRESCALE_OFFSET);
+		value &= ~PRESCALE_MASK(chan);
+		value |= prescale << PRESCALE_SHIFT(chan);
+		writel(value, kp->base + PRESCALE_OFFSET);
+
+		writel(pc, kp->base + PERIOD_COUNT_OFFSET(chan));
+
+		writel(dc, kp->base + DUTY_CYCLE_HIGH_OFFSET(chan));
+
+		kona_pwmc_apply_settings(kp, chan);
+	}
+
+	return 0;
+}
+
+static int kona_pwmc_set_polarity(struct pwm_chip *chip, struct pwm_device *pwm,
+				  enum pwm_polarity polarity)
+{
+	struct kona_pwmc *kp = to_kona_pwmc(chip);
+	unsigned int chan = pwm->hwpwm;
+	unsigned int value;
+	int ret;
+
+	ret = clk_prepare_enable(kp->clk);
+	if (ret < 0) {
+		dev_err(chip->dev, "failed to enable clock: %d\n", ret);
+		return ret;
+	}
+
+	value = readl(kp->base + PWM_CONTROL_OFFSET);
+
+	if (polarity == PWM_POLARITY_NORMAL)
+		value |= 1 << PWM_CONTROL_POLARITY_SHIFT(chan);
+	else
+		value &= ~(1 << PWM_CONTROL_POLARITY_SHIFT(chan));
+
+	writel(value, kp->base + PWM_CONTROL_OFFSET);
+
+	kona_pwmc_apply_settings(kp, chan);
+
+	/* Wait for waveform to settle before gating off the clock */
+	ndelay(400);
+
+	clk_disable_unprepare(kp->clk);
+
+	return 0;
+}
+
+static int kona_pwmc_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct kona_pwmc *kp = to_kona_pwmc(chip);
+	int ret;
+
+	ret = clk_prepare_enable(kp->clk);
+	if (ret < 0) {
+		dev_err(chip->dev, "failed to enable clock: %d\n", ret);
+		return ret;
+	}
+
+	ret = kona_pwmc_config(chip, pwm, pwm->duty_cycle, pwm->period);
+	if (ret < 0) {
+		clk_disable_unprepare(kp->clk);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void kona_pwmc_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct kona_pwmc *kp = to_kona_pwmc(chip);
+	unsigned int chan = pwm->hwpwm;
+
+	/* Simulate a disable by configuring for zero duty */
+	writel(0, kp->base + DUTY_CYCLE_HIGH_OFFSET(chan));
+	kona_pwmc_apply_settings(kp, chan);
+
+	/* Wait for waveform to settle before gating off the clock */
+	ndelay(400);
+
+	clk_disable_unprepare(kp->clk);
+}
+
+static const struct pwm_ops kona_pwm_ops = {
+	.config = kona_pwmc_config,
+	.set_polarity = kona_pwmc_set_polarity,
+	.enable = kona_pwmc_enable,
+	.disable = kona_pwmc_disable,
+	.owner = THIS_MODULE,
+};
+
+static int kona_pwmc_probe(struct platform_device *pdev)
+{
+	struct kona_pwmc *kp;
+	struct resource *res;
+	unsigned int chan;
+	unsigned int value = 0;
+	int ret = 0;
+
+	kp = devm_kzalloc(&pdev->dev, sizeof(*kp), GFP_KERNEL);
+	if (kp == NULL)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, kp);
+
+	kp->chip.dev = &pdev->dev;
+	kp->chip.ops = &kona_pwm_ops;
+	kp->chip.base = -1;
+	kp->chip.npwm = 6;
+	kp->chip.of_xlate = of_pwm_xlate_with_flags;
+	kp->chip.of_pwm_n_cells = 3;
+	kp->chip.can_sleep = true;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	kp->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(kp->base))
+		return PTR_ERR(kp->base);
+
+	kp->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(kp->clk)) {
+		dev_err(&pdev->dev, "failed to get clock: %ld\n",
+			PTR_ERR(kp->clk));
+		return PTR_ERR(kp->clk);
+	}
+
+	ret = clk_prepare_enable(kp->clk);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to enable clock: %d\n", ret);
+		return ret;
+	}
+
+	/* Set smooth mode, push/pull, and normal polarity for all channels */
+	for (chan = 0; chan < kp->chip.npwm; chan++) {
+		value |= (1 << PWM_CONTROL_SMOOTH_SHIFT(chan));
+		value |= (1 << PWM_CONTROL_TYPE_SHIFT(chan));
+		value |= (1 << PWM_CONTROL_POLARITY_SHIFT(chan));
+	}
+
+	writel(value, kp->base + PWM_CONTROL_OFFSET);
+
+	clk_disable_unprepare(kp->clk);
+
+	ret = pwmchip_add(&kp->chip);
+	if (ret < 0)
+		dev_err(&pdev->dev, "failed to add PWM chip: %d\n", ret);
+
+	return ret;
+}
+
+static int kona_pwmc_remove(struct platform_device *pdev)
+{
+	struct kona_pwmc *kp = platform_get_drvdata(pdev);
+	unsigned int chan;
+
+	for (chan = 0; chan < kp->chip.npwm; chan++)
+		if (test_bit(PWMF_ENABLED, &kp->chip.pwms[chan].flags))
+			clk_disable_unprepare(kp->clk);
+
+	return pwmchip_remove(&kp->chip);
+}
+
+static const struct of_device_id bcm_kona_pwmc_dt[] = {
+	{ .compatible = "brcm,kona-pwm" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, bcm_kona_pwmc_dt);
+
+static struct platform_driver kona_pwmc_driver = {
+	.driver = {
+		.name = "bcm-kona-pwm",
+		.of_match_table = bcm_kona_pwmc_dt,
+	},
+	.probe = kona_pwmc_probe,
+	.remove = kona_pwmc_remove,
+};
+module_platform_driver(kona_pwmc_driver);
+
+MODULE_AUTHOR("Broadcom Corporation <bcm-kernel-feedback-list@broadcom.com>");
+MODULE_AUTHOR("Tim Kryger <tkryger@broadcom.com>");
+MODULE_DESCRIPTION("Broadcom Kona PWM driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/pwm/pwm-fsl-ftm.c b/drivers/pwm/pwm-fsl-ftm.c
index 420169e96b5f..a18bc8fea385 100644
--- a/drivers/pwm/pwm-fsl-ftm.c
+++ b/drivers/pwm/pwm-fsl-ftm.c
@@ -454,6 +454,7 @@ static int fsl_pwm_probe(struct platform_device *pdev)
 	fpc->chip.of_pwm_n_cells = 3;
 	fpc->chip.base = -1;
 	fpc->chip.npwm = 8;
+	fpc->chip.can_sleep = true;
 
 	ret = pwmchip_add(&fpc->chip);
 	if (ret < 0) {
diff --git a/drivers/pwm/pwm-imx.c b/drivers/pwm/pwm-imx.c
index cc4773344874..d797c7b84c3f 100644
--- a/drivers/pwm/pwm-imx.c
+++ b/drivers/pwm/pwm-imx.c
@@ -241,10 +241,8 @@ static int imx_pwm_probe(struct platform_device *pdev)
 		return -ENODEV;
 
 	imx = devm_kzalloc(&pdev->dev, sizeof(*imx), GFP_KERNEL);
-	if (imx == NULL) {
-		dev_err(&pdev->dev, "failed to allocate memory\n");
+	if (imx == NULL)
 		return -ENOMEM;
-	}
 
 	imx->clk_per = devm_clk_get(&pdev->dev, "per");
 	if (IS_ERR(imx->clk_per)) {
diff --git a/drivers/pwm/pwm-lp3943.c b/drivers/pwm/pwm-lp3943.c
index a40b9c34e9ff..2c39b0e50fa4 100644
--- a/drivers/pwm/pwm-lp3943.c
+++ b/drivers/pwm/pwm-lp3943.c
@@ -278,6 +278,7 @@ static int lp3943_pwm_probe(struct platform_device *pdev)
 	lp3943_pwm->chip.dev = &pdev->dev;
 	lp3943_pwm->chip.ops = &lp3943_pwm_ops;
 	lp3943_pwm->chip.npwm = LP3943_NUM_PWMS;
+	lp3943_pwm->chip.can_sleep = true;
 
 	platform_set_drvdata(pdev, lp3943_pwm);
 
diff --git a/drivers/pwm/pwm-lpss.c b/drivers/pwm/pwm-lpss.c
index 449e372050a0..44ce6c6103ae 100644
--- a/drivers/pwm/pwm-lpss.c
+++ b/drivers/pwm/pwm-lpss.c
@@ -6,6 +6,7 @@
  * Author: Chew Kean Ho <kean.ho.chew@intel.com>
  * Author: Chang Rebecca Swee Fun <rebecca.swee.fun.chang@intel.com>
  * Author: Chew Chiau Ee <chiau.ee.chew@intel.com>
+ * Author: Alan Cox <alan@linux.intel.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -19,6 +20,9 @@
 #include <linux/module.h>
 #include <linux/pwm.h>
 #include <linux/platform_device.h>
+#include <linux/pci.h>
+
+static int pci_drv, plat_drv;	/* So we know which drivers registered */
 
 #define PWM				0x00000000
 #define PWM_ENABLE			BIT(31)
@@ -34,6 +38,16 @@ struct pwm_lpss_chip {
 	struct pwm_chip chip;
 	void __iomem *regs;
 	struct clk *clk;
+	unsigned long clk_rate;
+};
+
+struct pwm_lpss_boardinfo {
+	unsigned long clk_rate;
+};
+
+/* BayTrail */
+static const struct pwm_lpss_boardinfo byt_info = {
+	25000000
 };
 
 static inline struct pwm_lpss_chip *to_lpwm(struct pwm_chip *chip)
@@ -55,7 +69,7 @@ static int pwm_lpss_config(struct pwm_chip *chip, struct pwm_device *pwm,
 	/* The equation is: base_unit = ((freq / c) * 65536) + correction */
 	base_unit = freq * 65536;
 
-	c = clk_get_rate(lpwm->clk);
+	c = lpwm->clk_rate;
 	if (!c)
 		return -EINVAL;
 
@@ -113,52 +127,48 @@ static const struct pwm_ops pwm_lpss_ops = {
 	.owner = THIS_MODULE,
 };
 
-static const struct acpi_device_id pwm_lpss_acpi_match[] = {
-	{ "80860F09", 0 },
-	{ },
-};
-MODULE_DEVICE_TABLE(acpi, pwm_lpss_acpi_match);
-
-static int pwm_lpss_probe(struct platform_device *pdev)
+static struct pwm_lpss_chip *pwm_lpss_probe(struct device *dev,
+					    struct resource *r,
+					    const struct pwm_lpss_boardinfo *info)
 {
 	struct pwm_lpss_chip *lpwm;
-	struct resource *r;
 	int ret;
 
-	lpwm = devm_kzalloc(&pdev->dev, sizeof(*lpwm), GFP_KERNEL);
+	lpwm = devm_kzalloc(dev, sizeof(*lpwm), GFP_KERNEL);
 	if (!lpwm)
-		return -ENOMEM;
-
-	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+		return ERR_PTR(-ENOMEM);
 
-	lpwm->regs = devm_ioremap_resource(&pdev->dev, r);
+	lpwm->regs = devm_ioremap_resource(dev, r);
 	if (IS_ERR(lpwm->regs))
-		return PTR_ERR(lpwm->regs);
-
-	lpwm->clk = devm_clk_get(&pdev->dev, NULL);
-	if (IS_ERR(lpwm->clk)) {
-		dev_err(&pdev->dev, "failed to get PWM clock\n");
-		return PTR_ERR(lpwm->clk);
+		return ERR_CAST(lpwm->regs);
+
+	if (info) {
+		lpwm->clk_rate = info->clk_rate;
+	} else {
+		lpwm->clk = devm_clk_get(dev, NULL);
+		if (IS_ERR(lpwm->clk)) {
+			dev_err(dev, "failed to get PWM clock\n");
+			return ERR_CAST(lpwm->clk);
+		}
+		lpwm->clk_rate = clk_get_rate(lpwm->clk);
 	}
 
-	lpwm->chip.dev = &pdev->dev;
+	lpwm->chip.dev = dev;
 	lpwm->chip.ops = &pwm_lpss_ops;
 	lpwm->chip.base = -1;
 	lpwm->chip.npwm = 1;
 
 	ret = pwmchip_add(&lpwm->chip);
 	if (ret) {
-		dev_err(&pdev->dev, "failed to add PWM chip: %d\n", ret);
-		return ret;
+		dev_err(dev, "failed to add PWM chip: %d\n", ret);
+		return ERR_PTR(ret);
 	}
 
-	platform_set_drvdata(pdev, lpwm);
-	return 0;
+	return lpwm;
 }
 
-static int pwm_lpss_remove(struct platform_device *pdev)
+static int pwm_lpss_remove(struct pwm_lpss_chip *lpwm)
 {
-	struct pwm_lpss_chip *lpwm = platform_get_drvdata(pdev);
 	u32 ctrl;
 
 	ctrl = readl(lpwm->regs + PWM);
@@ -167,15 +177,104 @@ static int pwm_lpss_remove(struct platform_device *pdev)
 	return pwmchip_remove(&lpwm->chip);
 }
 
-static struct platform_driver pwm_lpss_driver = {
+static int pwm_lpss_probe_pci(struct pci_dev *pdev,
+			      const struct pci_device_id *id)
+{
+	const struct pwm_lpss_boardinfo *info;
+	struct pwm_lpss_chip *lpwm;
+	int err;
+
+	err = pci_enable_device(pdev);
+	if (err < 0)
+		return err;
+
+	info = (struct pwm_lpss_boardinfo *)id->driver_data;
+	lpwm = pwm_lpss_probe(&pdev->dev, &pdev->resource[0], info);
+	if (IS_ERR(lpwm))
+		return PTR_ERR(lpwm);
+
+	pci_set_drvdata(pdev, lpwm);
+	return 0;
+}
+
+static void pwm_lpss_remove_pci(struct pci_dev *pdev)
+{
+	struct pwm_lpss_chip *lpwm = pci_get_drvdata(pdev);
+
+	pwm_lpss_remove(lpwm);
+	pci_disable_device(pdev);
+}
+
+static struct pci_device_id pwm_lpss_pci_ids[] = {
+	{ PCI_VDEVICE(INTEL, 0x0f08), (unsigned long)&byt_info},
+	{ PCI_VDEVICE(INTEL, 0x0f09), (unsigned long)&byt_info},
+	{ },
+};
+MODULE_DEVICE_TABLE(pci, pwm_lpss_pci_ids);
+
+static struct pci_driver pwm_lpss_driver_pci = {
+	.name = "pwm-lpss",
+	.id_table = pwm_lpss_pci_ids,
+	.probe = pwm_lpss_probe_pci,
+	.remove = pwm_lpss_remove_pci,
+};
+
+static int pwm_lpss_probe_platform(struct platform_device *pdev)
+{
+	struct pwm_lpss_chip *lpwm;
+	struct resource *r;
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+	lpwm = pwm_lpss_probe(&pdev->dev, r, NULL);
+	if (IS_ERR(lpwm))
+		return PTR_ERR(lpwm);
+
+	platform_set_drvdata(pdev, lpwm);
+	return 0;
+}
+
+static int pwm_lpss_remove_platform(struct platform_device *pdev)
+{
+	struct pwm_lpss_chip *lpwm = platform_get_drvdata(pdev);
+
+	return pwm_lpss_remove(lpwm);
+}
+
+static const struct acpi_device_id pwm_lpss_acpi_match[] = {
+	{ "80860F09", 0 },
+	{ },
+};
+MODULE_DEVICE_TABLE(acpi, pwm_lpss_acpi_match);
+
+static struct platform_driver pwm_lpss_driver_platform = {
 	.driver = {
 		.name = "pwm-lpss",
 		.acpi_match_table = pwm_lpss_acpi_match,
 	},
-	.probe = pwm_lpss_probe,
-	.remove = pwm_lpss_remove,
+	.probe = pwm_lpss_probe_platform,
+	.remove = pwm_lpss_remove_platform,
 };
-module_platform_driver(pwm_lpss_driver);
+
+static int __init pwm_init(void)
+{
+	pci_drv = pci_register_driver(&pwm_lpss_driver_pci);
+	plat_drv = platform_driver_register(&pwm_lpss_driver_platform);
+	if (pci_drv && plat_drv)
+		return pci_drv;
+
+	return 0;
+}
+module_init(pwm_init);
+
+static void __exit pwm_exit(void)
+{
+	if (!pci_drv)
+		pci_unregister_driver(&pwm_lpss_driver_pci);
+	if (!plat_drv)
+		platform_driver_unregister(&pwm_lpss_driver_platform);
+}
+module_exit(pwm_exit);
 
 MODULE_DESCRIPTION("PWM driver for Intel LPSS");
 MODULE_AUTHOR("Mika Westerberg <mika.westerberg@linux.intel.com>");
diff --git a/drivers/pwm/pwm-mxs.c b/drivers/pwm/pwm-mxs.c
index 9475bc7a6f97..4f1bb4e0a426 100644
--- a/drivers/pwm/pwm-mxs.c
+++ b/drivers/pwm/pwm-mxs.c
@@ -147,6 +147,7 @@ static int mxs_pwm_probe(struct platform_device *pdev)
 	mxs->chip.dev = &pdev->dev;
 	mxs->chip.ops = &mxs_pwm_ops;
 	mxs->chip.base = -1;
+	mxs->chip.can_sleep = true;
 	ret = of_property_read_u32(np, "fsl,pwm-number", &mxs->chip.npwm);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "failed to get pwm number: %d\n", ret);
diff --git a/drivers/pwm/pwm-pxa.c b/drivers/pwm/pwm-pxa.c
index cd356d870244..0b312ec420b6 100644
--- a/drivers/pwm/pwm-pxa.c
+++ b/drivers/pwm/pwm-pxa.c
@@ -179,10 +179,8 @@ static int pwm_probe(struct platform_device *pdev)
 		return -EINVAL;
 
 	pwm = devm_kzalloc(&pdev->dev, sizeof(*pwm), GFP_KERNEL);
-	if (pwm == NULL) {
-		dev_err(&pdev->dev, "failed to allocate memory\n");
+	if (pwm == NULL)
 		return -ENOMEM;
-	}
 
 	pwm->clk = devm_clk_get(&pdev->dev, NULL);
 	if (IS_ERR(pwm->clk))
diff --git a/drivers/pwm/pwm-renesas-tpu.c b/drivers/pwm/pwm-renesas-tpu.c
index aff6ba9b49e7..3b71b42e89d5 100644
--- a/drivers/pwm/pwm-renesas-tpu.c
+++ b/drivers/pwm/pwm-renesas-tpu.c
@@ -21,13 +21,14 @@
 #include <linux/module.h>
 #include <linux/mutex.h>
 #include <linux/of.h>
-#include <linux/platform_data/pwm-renesas-tpu.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/pwm.h>
 #include <linux/slab.h>
 #include <linux/spinlock.h>
 
+#define TPU_CHANNEL_MAX		4
+
 #define TPU_TSTR		0x00	/* Timer start register (shared) */
 
 #define TPU_TCRn		0x00	/* Timer control register */
@@ -87,7 +88,6 @@ struct tpu_pwm_device {
 
 struct tpu_device {
 	struct platform_device *pdev;
-	enum pwm_polarity polarities[TPU_CHANNEL_MAX];
 	struct pwm_chip chip;
 	spinlock_t lock;
 
@@ -229,7 +229,7 @@ static int tpu_pwm_request(struct pwm_chip *chip, struct pwm_device *_pwm)
 
 	pwm->tpu = tpu;
 	pwm->channel = _pwm->hwpwm;
-	pwm->polarity = tpu->polarities[pwm->channel];
+	pwm->polarity = PWM_POLARITY_NORMAL;
 	pwm->prescaler = 0;
 	pwm->period = 0;
 	pwm->duty = 0;
@@ -388,16 +388,6 @@ static const struct pwm_ops tpu_pwm_ops = {
  * Probe and remove
  */
 
-static void tpu_parse_pdata(struct tpu_device *tpu)
-{
-	struct tpu_pwm_platform_data *pdata = tpu->pdev->dev.platform_data;
-	unsigned int i;
-
-	for (i = 0; i < ARRAY_SIZE(tpu->polarities); ++i)
-		tpu->polarities[i] = pdata ? pdata->channels[i].polarity
-				   : PWM_POLARITY_NORMAL;
-}
-
 static int tpu_probe(struct platform_device *pdev)
 {
 	struct tpu_device *tpu;
@@ -405,17 +395,12 @@ static int tpu_probe(struct platform_device *pdev)
 	int ret;
 
 	tpu = devm_kzalloc(&pdev->dev, sizeof(*tpu), GFP_KERNEL);
-	if (tpu == NULL) {
-		dev_err(&pdev->dev, "failed to allocate driver data\n");
+	if (tpu == NULL)
 		return -ENOMEM;
-	}
 
 	spin_lock_init(&tpu->lock);
 	tpu->pdev = pdev;
 
-	/* Initialize device configuration from platform data. */
-	tpu_parse_pdata(tpu);
-
 	/* Map memory, get clock and pin control. */
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	tpu->base = devm_ioremap_resource(&pdev->dev, res);
diff --git a/drivers/pwm/pwm-samsung.c b/drivers/pwm/pwm-samsung.c
index d66529a995a1..ba6b650cf8dc 100644
--- a/drivers/pwm/pwm-samsung.c
+++ b/drivers/pwm/pwm-samsung.c
@@ -335,9 +335,6 @@ static int pwm_samsung_config(struct pwm_chip *chip, struct pwm_device *pwm,
 	writel(tcnt, our_chip->base + REG_TCNTB(pwm->hwpwm));
 	writel(tcmp, our_chip->base + REG_TCMPB(pwm->hwpwm));
 
-	if (test_bit(PWMF_ENABLED, &pwm->flags))
-		pwm_samsung_enable(chip, pwm);
-
 	chan->period_ns = period_ns;
 	chan->tin_ns = tin_ns;
 	chan->duty_ns = duty_ns;
diff --git a/drivers/pwm/pwm-spear.c b/drivers/pwm/pwm-spear.c
index cb2d4f0f9711..6fd93e6a4122 100644
--- a/drivers/pwm/pwm-spear.c
+++ b/drivers/pwm/pwm-spear.c
@@ -179,10 +179,8 @@ static int spear_pwm_probe(struct platform_device *pdev)
 	u32 val;
 
 	pc = devm_kzalloc(&pdev->dev, sizeof(*pc), GFP_KERNEL);
-	if (!pc) {
-		dev_err(&pdev->dev, "failed to allocate memory\n");
+	if (!pc)
 		return -ENOMEM;
-	}
 
 	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	pc->mmio_base = devm_ioremap_resource(&pdev->dev, r);
@@ -222,7 +220,7 @@ static int spear_pwm_probe(struct platform_device *pdev)
 	}
 
 	ret = pwmchip_add(&pc->chip);
-	if (!ret) {
+	if (ret < 0) {
 		clk_unprepare(pc->clk);
 		dev_err(&pdev->dev, "pwmchip_add() failed: %d\n", ret);
 	}
diff --git a/drivers/pwm/pwm-tegra.c b/drivers/pwm/pwm-tegra.c
index 74298c561c4e..61d86b9498ca 100644
--- a/drivers/pwm/pwm-tegra.c
+++ b/drivers/pwm/pwm-tegra.c
@@ -173,10 +173,8 @@ static int tegra_pwm_probe(struct platform_device *pdev)
 	int ret;
 
 	pwm = devm_kzalloc(&pdev->dev, sizeof(*pwm), GFP_KERNEL);
-	if (!pwm) {
-		dev_err(&pdev->dev, "failed to allocate memory\n");
+	if (!pwm)
 		return -ENOMEM;
-	}
 
 	pwm->dev = &pdev->dev;
 
diff --git a/drivers/pwm/pwm-tiecap.c b/drivers/pwm/pwm-tiecap.c
index 032092c7a6ae..74efbe7f20c3 100644
--- a/drivers/pwm/pwm-tiecap.c
+++ b/drivers/pwm/pwm-tiecap.c
@@ -209,10 +209,8 @@ static int ecap_pwm_probe(struct platform_device *pdev)
 	u16 status;
 
 	pc = devm_kzalloc(&pdev->dev, sizeof(*pc), GFP_KERNEL);
-	if (!pc) {
-		dev_err(&pdev->dev, "failed to allocate memory\n");
+	if (!pc)
 		return -ENOMEM;
-	}
 
 	clk = devm_clk_get(&pdev->dev, "fck");
 	if (IS_ERR(clk)) {
diff --git a/drivers/pwm/pwm-tiehrpwm.c b/drivers/pwm/pwm-tiehrpwm.c
index aee4471424d1..cb75133085a8 100644
--- a/drivers/pwm/pwm-tiehrpwm.c
+++ b/drivers/pwm/pwm-tiehrpwm.c
@@ -138,12 +138,12 @@ static inline struct ehrpwm_pwm_chip *to_ehrpwm_pwm_chip(struct pwm_chip *chip)
 	return container_of(chip, struct ehrpwm_pwm_chip, chip);
 }
 
-static u16 ehrpwm_read(void __iomem *base, int offset)
+static inline u16 ehrpwm_read(void __iomem *base, int offset)
 {
 	return readw(base + offset);
 }
 
-static void ehrpwm_write(void __iomem *base, int offset, unsigned int val)
+static inline void ehrpwm_write(void __iomem *base, int offset, unsigned int val)
 {
 	writew(val & 0xFFFF, base + offset);
 }
@@ -440,10 +440,8 @@ static int ehrpwm_pwm_probe(struct platform_device *pdev)
 	u16 status;
 
 	pc = devm_kzalloc(&pdev->dev, sizeof(*pc), GFP_KERNEL);
-	if (!pc) {
-		dev_err(&pdev->dev, "failed to allocate memory\n");
+	if (!pc)
 		return -ENOMEM;
-	}
 
 	clk = devm_clk_get(&pdev->dev, "fck");
 	if (IS_ERR(clk)) {
@@ -531,6 +529,7 @@ static int ehrpwm_pwm_remove(struct platform_device *pdev)
 	return pwmchip_remove(&pc->chip);
 }
 
+#ifdef CONFIG_PM_SLEEP
 static void ehrpwm_pwm_save_context(struct ehrpwm_pwm_chip *pc)
 {
 	pm_runtime_get_sync(pc->chip.dev);
@@ -557,7 +556,6 @@ static void ehrpwm_pwm_restore_context(struct ehrpwm_pwm_chip *pc)
 	ehrpwm_write(pc->mmio_base, TBCTL, pc->ctx.tbctl);
 }
 
-#ifdef CONFIG_PM_SLEEP
 static int ehrpwm_pwm_suspend(struct device *dev)
 {
 	struct ehrpwm_pwm_chip *pc = dev_get_drvdata(dev);
diff --git a/drivers/pwm/pwm-twl.c b/drivers/pwm/pwm-twl.c
index b99a50e626a6..04f76725d591 100644
--- a/drivers/pwm/pwm-twl.c
+++ b/drivers/pwm/pwm-twl.c
@@ -265,14 +265,6 @@ static void twl6030_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
 
 	ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, val, TWL6030_TOGGLE3_REG);
 	if (ret < 0) {
-		dev_err(chip->dev, "%s: Failed to read TOGGLE3\n", pwm->label);
-		goto out;
-	}
-
-	val |= TWL6030_PWM_TOGGLE(pwm->hwpwm, TWL6030_PWMXS | TWL6030_PWMXEN);
-
-	ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, val, TWL6030_TOGGLE3_REG);
-	if (ret < 0) {
 		dev_err(chip->dev, "%s: Failed to disable PWM\n", pwm->label);
 		goto out;
 	}
diff --git a/drivers/pwm/pwm-vt8500.c b/drivers/pwm/pwm-vt8500.c
index 323125abf3f4..652e6b5b859b 100644
--- a/drivers/pwm/pwm-vt8500.c
+++ b/drivers/pwm/pwm-vt8500.c
@@ -211,10 +211,8 @@ static int vt8500_pwm_probe(struct platform_device *pdev)
 	}
 
 	chip = devm_kzalloc(&pdev->dev, sizeof(*chip), GFP_KERNEL);
-	if (chip == NULL) {
-		dev_err(&pdev->dev, "failed to allocate memory\n");
+	if (chip == NULL)
 		return -ENOMEM;
-	}
 
 	chip->chip.dev = &pdev->dev;
 	chip->chip.ops = &vt8500_pwm_ops;
diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c
index b75201ff46f6..38ca88bc5c3e 100644
--- a/drivers/video/backlight/pwm_bl.c
+++ b/drivers/video/backlight/pwm_bl.c
@@ -10,8 +10,8 @@
  * published by the Free Software Foundation.
  */
 
+#include <linux/gpio/consumer.h>
 #include <linux/gpio.h>
-#include <linux/of_gpio.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
@@ -32,8 +32,7 @@ struct pwm_bl_data {
 	unsigned int		*levels;
 	bool			enabled;
 	struct regulator	*power_supply;
-	int			enable_gpio;
-	unsigned long		enable_gpio_flags;
+	struct gpio_desc	*enable_gpio;
 	unsigned int		scale;
 	int			(*notify)(struct device *,
 					  int brightness);
@@ -54,12 +53,8 @@ static void pwm_backlight_power_on(struct pwm_bl_data *pb, int brightness)
 	if (err < 0)
 		dev_err(pb->dev, "failed to enable power supply\n");
 
-	if (gpio_is_valid(pb->enable_gpio)) {
-		if (pb->enable_gpio_flags & PWM_BACKLIGHT_GPIO_ACTIVE_LOW)
-			gpio_set_value(pb->enable_gpio, 0);
-		else
-			gpio_set_value(pb->enable_gpio, 1);
-	}
+	if (pb->enable_gpio)
+		gpiod_set_value(pb->enable_gpio, 1);
 
 	pwm_enable(pb->pwm);
 	pb->enabled = true;
@@ -73,12 +68,8 @@ static void pwm_backlight_power_off(struct pwm_bl_data *pb)
 	pwm_config(pb->pwm, 0, pb->period);
 	pwm_disable(pb->pwm);
 
-	if (gpio_is_valid(pb->enable_gpio)) {
-		if (pb->enable_gpio_flags & PWM_BACKLIGHT_GPIO_ACTIVE_LOW)
-			gpio_set_value(pb->enable_gpio, 1);
-		else
-			gpio_set_value(pb->enable_gpio, 0);
-	}
+	if (pb->enable_gpio)
+		gpiod_set_value(pb->enable_gpio, 0);
 
 	regulator_disable(pb->power_supply);
 	pb->enabled = false;
@@ -148,7 +139,6 @@ static int pwm_backlight_parse_dt(struct device *dev,
 				  struct platform_pwm_backlight_data *data)
 {
 	struct device_node *node = dev->of_node;
-	enum of_gpio_flags flags;
 	struct property *prop;
 	int length;
 	u32 value;
@@ -189,14 +179,6 @@ static int pwm_backlight_parse_dt(struct device *dev,
 		data->max_brightness--;
 	}
 
-	data->enable_gpio = of_get_named_gpio_flags(node, "enable-gpios", 0,
-						    &flags);
-	if (data->enable_gpio == -EPROBE_DEFER)
-		return -EPROBE_DEFER;
-
-	if (gpio_is_valid(data->enable_gpio) && (flags & OF_GPIO_ACTIVE_LOW))
-		data->enable_gpio_flags |= PWM_BACKLIGHT_GPIO_ACTIVE_LOW;
-
 	return 0;
 }
 
@@ -256,8 +238,6 @@ static int pwm_backlight_probe(struct platform_device *pdev)
 	} else
 		pb->scale = data->max_brightness;
 
-	pb->enable_gpio = data->enable_gpio;
-	pb->enable_gpio_flags = data->enable_gpio_flags;
 	pb->notify = data->notify;
 	pb->notify_after = data->notify_after;
 	pb->check_fb = data->check_fb;
@@ -265,26 +245,38 @@ static int pwm_backlight_probe(struct platform_device *pdev)
 	pb->dev = &pdev->dev;
 	pb->enabled = false;
 
-	if (gpio_is_valid(pb->enable_gpio)) {
-		unsigned long flags;
-
-		if (pb->enable_gpio_flags & PWM_BACKLIGHT_GPIO_ACTIVE_LOW)
-			flags = GPIOF_OUT_INIT_HIGH;
+	pb->enable_gpio = devm_gpiod_get(&pdev->dev, "enable");
+	if (IS_ERR(pb->enable_gpio)) {
+		ret = PTR_ERR(pb->enable_gpio);
+		if (ret == -ENOENT)
+			pb->enable_gpio = NULL;
 		else
-			flags = GPIOF_OUT_INIT_LOW;
+			goto err_alloc;
+	}
 
-		ret = gpio_request_one(pb->enable_gpio, flags, "enable");
+	/*
+	 * Compatibility fallback for drivers still using the integer GPIO
+	 * platform data. Must go away soon.
+	 */
+	if (!pb->enable_gpio && gpio_is_valid(data->enable_gpio)) {
+		ret = devm_gpio_request_one(&pdev->dev, data->enable_gpio,
+					    GPIOF_OUT_INIT_HIGH, "enable");
 		if (ret < 0) {
 			dev_err(&pdev->dev, "failed to request GPIO#%d: %d\n",
-				pb->enable_gpio, ret);
+				data->enable_gpio, ret);
 			goto err_alloc;
 		}
+
+		pb->enable_gpio = gpio_to_desc(data->enable_gpio);
 	}
 
+	if (pb->enable_gpio)
+		gpiod_direction_output(pb->enable_gpio, 1);
+
 	pb->power_supply = devm_regulator_get(&pdev->dev, "power");
 	if (IS_ERR(pb->power_supply)) {
 		ret = PTR_ERR(pb->power_supply);
-		goto err_gpio;
+		goto err_alloc;
 	}
 
 	pb->pwm = devm_pwm_get(&pdev->dev, NULL);
@@ -295,7 +287,7 @@ static int pwm_backlight_probe(struct platform_device *pdev)
 		if (IS_ERR(pb->pwm)) {
 			dev_err(&pdev->dev, "unable to request legacy PWM\n");
 			ret = PTR_ERR(pb->pwm);
-			goto err_gpio;
+			goto err_alloc;
 		}
 	}
 
@@ -304,12 +296,15 @@ static int pwm_backlight_probe(struct platform_device *pdev)
 	/*
 	 * The DT case will set the pwm_period_ns field to 0 and store the
 	 * period, parsed from the DT, in the PWM device. For the non-DT case,
-	 * set the period from platform data.
+	 * set the period from platform data if it has not already been set
+	 * via the PWM lookup table.
 	 */
-	if (data->pwm_period_ns > 0)
+	pb->period = pwm_get_period(pb->pwm);
+	if (!pb->period && (data->pwm_period_ns > 0)) {
+		pb->period = data->pwm_period_ns;
 		pwm_set_period(pb->pwm, data->pwm_period_ns);
+	}
 
-	pb->period = pwm_get_period(pb->pwm);
 	pb->lth_brightness = data->lth_brightness * (pb->period / pb->scale);
 
 	memset(&props, 0, sizeof(struct backlight_properties));
@@ -320,7 +315,7 @@ static int pwm_backlight_probe(struct platform_device *pdev)
 	if (IS_ERR(bl)) {
 		dev_err(&pdev->dev, "failed to register backlight\n");
 		ret = PTR_ERR(bl);
-		goto err_gpio;
+		goto err_alloc;
 	}
 
 	if (data->dft_brightness > data->max_brightness) {
@@ -336,9 +331,6 @@ static int pwm_backlight_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, bl);
 	return 0;
 
-err_gpio:
-	if (gpio_is_valid(pb->enable_gpio))
-		gpio_free(pb->enable_gpio);
 err_alloc:
 	if (data->exit)
 		data->exit(&pdev->dev);
@@ -359,6 +351,14 @@ static int pwm_backlight_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static void pwm_backlight_shutdown(struct platform_device *pdev)
+{
+	struct backlight_device *bl = platform_get_drvdata(pdev);
+	struct pwm_bl_data *pb = bl_get_data(bl);
+
+	pwm_backlight_power_off(pb);
+}
+
 #ifdef CONFIG_PM_SLEEP
 static int pwm_backlight_suspend(struct device *dev)
 {
@@ -404,6 +404,7 @@ static struct platform_driver pwm_backlight_driver = {
 	},
 	.probe		= pwm_backlight_probe,
 	.remove		= pwm_backlight_remove,
+	.shutdown	= pwm_backlight_shutdown,
 };
 
 module_platform_driver(pwm_backlight_driver);