diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/thermal/qcom/tsens-8960.c | 23 |
1 files changed, 20 insertions, 3 deletions
diff --git a/drivers/thermal/qcom/tsens-8960.c b/drivers/thermal/qcom/tsens-8960.c index 83746ee3fc88..a96d37c2b674 100644 --- a/drivers/thermal/qcom/tsens-8960.c +++ b/drivers/thermal/qcom/tsens-8960.c @@ -27,9 +27,9 @@ #define EN BIT(0) #define SW_RST BIT(1) #define SENSOR0_EN BIT(3) +#define MEASURE_PERIOD BIT(18) #define SLP_CLK_ENA BIT(26) #define SLP_CLK_ENA_8660 BIT(24) -#define MEASURE_PERIOD 1 #define SENSOR0_SHIFT 3 /* INT_STATUS_ADDR bitmasks */ @@ -126,17 +126,34 @@ static int resume_8960(struct tsens_priv *priv) static int enable_8960(struct tsens_priv *priv, int id) { int ret; - u32 reg, mask; + u32 reg, mask = BIT(id); ret = regmap_read(priv->tm_map, CNTL_ADDR, ®); if (ret) return ret; - mask = BIT(id + SENSOR0_SHIFT); + /* HARDWARE BUG: + * On platforms with more than 6 sensors, all remaining sensors + * must be enabled together, otherwise undefined results are expected. + * (Sensor 6-7 disabled, Sensor 3 disabled...) In the original driver, + * all the sensors are enabled in one step hence this bug is not + * triggered. + */ + if (id > 5) + mask = GENMASK(10, 6); + + mask <<= SENSOR0_SHIFT; + + /* Sensors already enabled. Skip. */ + if ((reg & mask) == mask) + return 0; + ret = regmap_write(priv->tm_map, CNTL_ADDR, reg | SW_RST); if (ret) return ret; + reg |= MEASURE_PERIOD; + if (priv->num_sensors > 1) reg |= mask | SLP_CLK_ENA | EN; else |