diff options
Diffstat (limited to 'fs/ext3/inode.c')
| -rw-r--r-- | fs/ext3/inode.c | 82 |
1 files changed, 40 insertions, 42 deletions
diff --git a/fs/ext3/inode.c b/fs/ext3/inode.c index 84be02e93652..03ba5bcab186 100644 --- a/fs/ext3/inode.c +++ b/fs/ext3/inode.c @@ -13,11 +13,11 @@ * Copyright (C) 1991, 1992 Linus Torvalds * * Goal-directed block allocation by Stephen Tweedie - * (sct@redhat.com), 1993, 1998 + * (sct@redhat.com), 1993, 1998 * Big-endian to little-endian byte-swapping/bitmaps by * David S. Miller (davem@caip.rutgers.edu), 1995 * 64-bit file support on 64-bit platforms by Jakub Jelinek - * (jj@sunsite.ms.mff.cuni.cz) + * (jj@sunsite.ms.mff.cuni.cz) * * Assorted race fixes, rewrite of ext3_get_block() by Al Viro, 2000 */ @@ -36,6 +36,7 @@ #include <linux/writeback.h> #include <linux/mpage.h> #include <linux/uio.h> +#include <linux/bio.h> #include "xattr.h" #include "acl.h" @@ -55,7 +56,7 @@ static int ext3_inode_is_fast_symlink(struct inode *inode) /* * The ext3 forget function must perform a revoke if we are freeing data * which has been journaled. Metadata (eg. indirect blocks) must be - * revoked in all cases. + * revoked in all cases. * * "bh" may be NULL: a metadata block may have been freed from memory * but there may still be a record of it in the journal, and that record @@ -105,7 +106,7 @@ int ext3_forget(handle_t *handle, int is_metadata, struct inode *inode, * Work out how many blocks we need to proceed with the next chunk of a * truncate transaction. */ -static unsigned long blocks_for_truncate(struct inode *inode) +static unsigned long blocks_for_truncate(struct inode *inode) { unsigned long needed; @@ -122,13 +123,13 @@ static unsigned long blocks_for_truncate(struct inode *inode) /* But we need to bound the transaction so we don't overflow the * journal. */ - if (needed > EXT3_MAX_TRANS_DATA) + if (needed > EXT3_MAX_TRANS_DATA) needed = EXT3_MAX_TRANS_DATA; return EXT3_DATA_TRANS_BLOCKS(inode->i_sb) + needed; } -/* +/* * Truncate transactions can be complex and absolutely huge. So we need to * be able to restart the transaction at a conventient checkpoint to make * sure we don't overflow the journal. @@ -136,9 +137,9 @@ static unsigned long blocks_for_truncate(struct inode *inode) * start_transaction gets us a new handle for a truncate transaction, * and extend_transaction tries to extend the existing one a bit. If * extend fails, we need to propagate the failure up and restart the - * transaction in the top-level truncate loop. --sct + * transaction in the top-level truncate loop. --sct */ -static handle_t *start_transaction(struct inode *inode) +static handle_t *start_transaction(struct inode *inode) { handle_t *result; @@ -215,12 +216,12 @@ void ext3_delete_inode (struct inode * inode) ext3_orphan_del(handle, inode); EXT3_I(inode)->i_dtime = get_seconds(); - /* + /* * One subtle ordering requirement: if anything has gone wrong * (transaction abort, IO errors, whatever), then we can still * do these next steps (the fs will already have been marked as * having errors), but we can't free the inode if the mark_dirty - * fails. + * fails. */ if (ext3_mark_inode_dirty(handle, inode)) /* If that failed, just do the required in-core inode clear. */ @@ -398,7 +399,7 @@ no_block: * + if there is a block to the left of our position - allocate near it. * + if pointer will live in indirect block - allocate near that block. * + if pointer will live in inode - allocate in the same - * cylinder group. + * cylinder group. * * In the latter case we colour the starting block by the callers PID to * prevent it from clashing with concurrent allocations for a different inode @@ -470,7 +471,7 @@ static ext3_fsblk_t ext3_find_goal(struct inode *inode, long block, * ext3_blks_to_allocate: Look up the block map and count the number * of direct blocks need to be allocated for the given branch. * - * @branch: chain of indirect blocks + * @branch: chain of indirect blocks * @k: number of blocks need for indirect blocks * @blks: number of data blocks to be mapped. * @blocks_to_boundary: the offset in the indirect block @@ -744,7 +745,7 @@ static int ext3_splice_branch(handle_t *handle, struct inode *inode, jbd_debug(5, "splicing indirect only\n"); BUFFER_TRACE(where->bh, "call ext3_journal_dirty_metadata"); err = ext3_journal_dirty_metadata(handle, where->bh); - if (err) + if (err) goto err_out; } else { /* @@ -1073,7 +1074,7 @@ struct buffer_head *ext3_bread(handle_t *handle, struct inode *inode, return bh; if (buffer_uptodate(bh)) return bh; - ll_rw_block(READ, 1, &bh); + ll_rw_block(READ_META, 1, &bh); wait_on_buffer(bh); if (buffer_uptodate(bh)) return bh; @@ -1098,7 +1099,7 @@ static int walk_page_buffers( handle_t *handle, for ( bh = head, block_start = 0; ret == 0 && (bh != head || !block_start); - block_start = block_end, bh = next) + block_start = block_end, bh = next) { next = bh->b_this_page; block_end = block_start + blocksize; @@ -1137,7 +1138,7 @@ static int walk_page_buffers( handle_t *handle, * So what we do is to rely on the fact that journal_stop/journal_start * will _not_ run commit under these circumstances because handle->h_ref * is elevated. We'll still have enough credits for the tiny quotafile - * write. + * write. */ static int do_journal_get_write_access(handle_t *handle, struct buffer_head *bh) @@ -1282,7 +1283,7 @@ static int ext3_journalled_commit_write(struct file *file, if (inode->i_size > EXT3_I(inode)->i_disksize) { EXT3_I(inode)->i_disksize = inode->i_size; ret2 = ext3_mark_inode_dirty(handle, inode); - if (!ret) + if (!ret) ret = ret2; } ret2 = ext3_journal_stop(handle); @@ -1291,7 +1292,7 @@ static int ext3_journalled_commit_write(struct file *file, return ret; } -/* +/* * bmap() is special. It gets used by applications such as lilo and by * the swapper to find the on-disk block of a specific piece of data. * @@ -1300,10 +1301,10 @@ static int ext3_journalled_commit_write(struct file *file, * filesystem and enables swap, then they may get a nasty shock when the * data getting swapped to that swapfile suddenly gets overwritten by * the original zero's written out previously to the journal and - * awaiting writeback in the kernel's buffer cache. + * awaiting writeback in the kernel's buffer cache. * * So, if we see any bmap calls here on a modified, data-journaled file, - * take extra steps to flush any blocks which might be in the cache. + * take extra steps to flush any blocks which might be in the cache. */ static sector_t ext3_bmap(struct address_space *mapping, sector_t block) { @@ -1312,16 +1313,16 @@ static sector_t ext3_bmap(struct address_space *mapping, sector_t block) int err; if (EXT3_I(inode)->i_state & EXT3_STATE_JDATA) { - /* + /* * This is a REALLY heavyweight approach, but the use of * bmap on dirty files is expected to be extremely rare: * only if we run lilo or swapon on a freshly made file - * do we expect this to happen. + * do we expect this to happen. * * (bmap requires CAP_SYS_RAWIO so this does not * represent an unprivileged user DOS attack --- we'd be * in trouble if mortal users could trigger this path at - * will.) + * will.) * * NB. EXT3_STATE_JDATA is not set on files other than * regular files. If somebody wants to bmap a directory @@ -1457,7 +1458,7 @@ static int ext3_ordered_writepage(struct page *page, */ /* - * And attach them to the current transaction. But only if + * And attach them to the current transaction. But only if * block_write_full_page() succeeded. Otherwise they are unmapped, * and generally junk. */ @@ -1644,7 +1645,7 @@ static ssize_t ext3_direct_IO(int rw, struct kiocb *iocb, } } - ret = blockdev_direct_IO(rw, iocb, inode, inode->i_sb->s_bdev, iov, + ret = blockdev_direct_IO(rw, iocb, inode, inode->i_sb->s_bdev, iov, offset, nr_segs, ext3_get_block, NULL); @@ -2025,7 +2026,7 @@ static void ext3_free_data(handle_t *handle, struct inode *inode, __le32 *first, __le32 *last) { ext3_fsblk_t block_to_free = 0; /* Starting block # of a run */ - unsigned long count = 0; /* Number of blocks in the run */ + unsigned long count = 0; /* Number of blocks in the run */ __le32 *block_to_free_p = NULL; /* Pointer into inode/ind corresponding to block_to_free */ @@ -2054,7 +2055,7 @@ static void ext3_free_data(handle_t *handle, struct inode *inode, } else if (nr == block_to_free + count) { count++; } else { - ext3_clear_blocks(handle, inode, this_bh, + ext3_clear_blocks(handle, inode, this_bh, block_to_free, count, block_to_free_p, p); block_to_free = nr; @@ -2115,7 +2116,7 @@ static void ext3_free_branches(handle_t *handle, struct inode *inode, */ if (!bh) { ext3_error(inode->i_sb, "ext3_free_branches", - "Read failure, inode=%ld, block="E3FSBLK, + "Read failure, inode=%lu, block="E3FSBLK, inode->i_ino, nr); continue; } @@ -2184,7 +2185,7 @@ static void ext3_free_branches(handle_t *handle, struct inode *inode, *p = 0; BUFFER_TRACE(parent_bh, "call ext3_journal_dirty_metadata"); - ext3_journal_dirty_metadata(handle, + ext3_journal_dirty_metadata(handle, parent_bh); } } @@ -2540,7 +2541,7 @@ make_io: */ get_bh(bh); bh->b_end_io = end_buffer_read_sync; - submit_bh(READ, bh); + submit_bh(READ_META, bh); wait_on_buffer(bh); if (!buffer_uptodate(bh)) { ext3_error(inode->i_sb, "ext3_get_inode_loc", @@ -2632,9 +2633,6 @@ void ext3_read_inode(struct inode * inode) * recovery code: that's fine, we're about to complete * the process of deleting those. */ } - inode->i_blksize = PAGE_SIZE; /* This is the optimal IO size - * (for stat), not the fs block - * size */ inode->i_blocks = le32_to_cpu(raw_inode->i_blocks); ei->i_flags = le32_to_cpu(raw_inode->i_flags); #ifdef EXT3_FRAGMENTS @@ -2704,7 +2702,7 @@ void ext3_read_inode(struct inode * inode) if (raw_inode->i_block[0]) init_special_inode(inode, inode->i_mode, old_decode_dev(le32_to_cpu(raw_inode->i_block[0]))); - else + else init_special_inode(inode, inode->i_mode, new_decode_dev(le32_to_cpu(raw_inode->i_block[1]))); } @@ -2724,8 +2722,8 @@ bad_inode: * * The caller must have write access to iloc->bh. */ -static int ext3_do_update_inode(handle_t *handle, - struct inode *inode, +static int ext3_do_update_inode(handle_t *handle, + struct inode *inode, struct ext3_iloc *iloc) { struct ext3_inode *raw_inode = ext3_raw_inode(iloc); @@ -2900,7 +2898,7 @@ int ext3_write_inode(struct inode *inode, int wait) * commit will leave the blocks being flushed in an unused state on * disk. (On recovery, the inode will get truncated and the blocks will * be freed, so we have a strong guarantee that no future commit will - * leave these blocks visible to the user.) + * leave these blocks visible to the user.) * * Called with inode->sem down. */ @@ -3043,13 +3041,13 @@ int ext3_mark_iloc_dirty(handle_t *handle, return err; } -/* +/* * On success, We end up with an outstanding reference count against - * iloc->bh. This _must_ be cleaned up later. + * iloc->bh. This _must_ be cleaned up later. */ int -ext3_reserve_inode_write(handle_t *handle, struct inode *inode, +ext3_reserve_inode_write(handle_t *handle, struct inode *inode, struct ext3_iloc *iloc) { int err = 0; @@ -3139,7 +3137,7 @@ out: } #if 0 -/* +/* * Bind an inode's backing buffer_head into this transaction, to prevent * it from being flushed to disk early. Unlike * ext3_reserve_inode_write, this leaves behind no bh reference and @@ -3157,7 +3155,7 @@ static int ext3_pin_inode(handle_t *handle, struct inode *inode) BUFFER_TRACE(iloc.bh, "get_write_access"); err = journal_get_write_access(handle, iloc.bh); if (!err) - err = ext3_journal_dirty_metadata(handle, + err = ext3_journal_dirty_metadata(handle, iloc.bh); brelse(iloc.bh); } |