summaryrefslogtreecommitdiffstats
path: root/fs/jffs2/wbuf.c
diff options
context:
space:
mode:
Diffstat (limited to 'fs/jffs2/wbuf.c')
-rw-r--r--fs/jffs2/wbuf.c128
1 files changed, 64 insertions, 64 deletions
diff --git a/fs/jffs2/wbuf.c b/fs/jffs2/wbuf.c
index 44d8a894a41b..242cd53a970c 100644
--- a/fs/jffs2/wbuf.c
+++ b/fs/jffs2/wbuf.c
@@ -188,7 +188,7 @@ static void jffs2_wbuf_recover(struct jffs2_sb_info *c)
/* Find the first node to be recovered, by skipping over every
node which ends before the wbuf starts, or which is obsolete. */
first_raw = &jeb->first_node;
- while (*first_raw &&
+ while (*first_raw &&
(ref_obsolete(*first_raw) ||
(ref_offset(*first_raw)+ref_totlen(c, jeb, *first_raw)) < c->wbuf_ofs)) {
D1(printk(KERN_DEBUG "Skipping node at 0x%08x(%d)-0x%08x which is either before 0x%08x or obsolete\n",
@@ -237,7 +237,7 @@ static void jffs2_wbuf_recover(struct jffs2_sb_info *c)
ret = c->mtd->read_ecc(c->mtd, start, c->wbuf_ofs - start, &retlen, buf, NULL, c->oobinfo);
else
ret = c->mtd->read(c->mtd, start, c->wbuf_ofs - start, &retlen, buf);
-
+
if (ret == -EBADMSG && retlen == c->wbuf_ofs - start) {
/* ECC recovered */
ret = 0;
@@ -274,15 +274,15 @@ static void jffs2_wbuf_recover(struct jffs2_sb_info *c)
if (end-start >= c->wbuf_pagesize) {
/* Need to do another write immediately, but it's possible
that this is just because the wbuf itself is completely
- full, and there's nothing earlier read back from the
- flash. Hence 'buf' isn't necessarily what we're writing
+ full, and there's nothing earlier read back from the
+ flash. Hence 'buf' isn't necessarily what we're writing
from. */
unsigned char *rewrite_buf = buf?:c->wbuf;
uint32_t towrite = (end-start) - ((end-start)%c->wbuf_pagesize);
D1(printk(KERN_DEBUG "Write 0x%x bytes at 0x%08x in wbuf recover\n",
towrite, ofs));
-
+
#ifdef BREAKMEHEADER
static int breakme;
if (breakme++ == 20) {
@@ -434,7 +434,7 @@ static int __jffs2_flush_wbuf(struct jffs2_sb_info *c, int pad)
this happens, if we have a change to a new block,
or if fsync forces us to flush the writebuffer.
if we have a switch to next page, we will not have
- enough remaining space for this.
+ enough remaining space for this.
*/
if (pad ) {
c->wbuf_len = PAD(c->wbuf_len);
@@ -442,7 +442,7 @@ static int __jffs2_flush_wbuf(struct jffs2_sb_info *c, int pad)
/* Pad with JFFS2_DIRTY_BITMASK initially. this helps out ECC'd NOR
with 8 byte page size */
memset(c->wbuf + c->wbuf_len, 0, c->wbuf_pagesize - c->wbuf_len);
-
+
if ( c->wbuf_len + sizeof(struct jffs2_unknown_node) < c->wbuf_pagesize) {
struct jffs2_unknown_node *padnode = (void *)(c->wbuf + c->wbuf_len);
padnode->magic = cpu_to_je16(JFFS2_MAGIC_BITMASK);
@@ -453,7 +453,7 @@ static int __jffs2_flush_wbuf(struct jffs2_sb_info *c, int pad)
}
/* else jffs2_flash_writev has actually filled in the rest of the
buffer for us, and will deal with the node refs etc. later. */
-
+
#ifdef BREAKME
static int breakme;
if (breakme++ == 20) {
@@ -462,9 +462,9 @@ static int __jffs2_flush_wbuf(struct jffs2_sb_info *c, int pad)
c->mtd->write_ecc(c->mtd, c->wbuf_ofs, c->wbuf_pagesize,
&retlen, brokenbuf, NULL, c->oobinfo);
ret = -EIO;
- } else
+ } else
#endif
-
+
if (jffs2_cleanmarker_oob(c))
ret = c->mtd->write_ecc(c->mtd, c->wbuf_ofs, c->wbuf_pagesize, &retlen, c->wbuf, NULL, c->oobinfo);
else
@@ -485,7 +485,7 @@ static int __jffs2_flush_wbuf(struct jffs2_sb_info *c, int pad)
}
spin_lock(&c->erase_completion_lock);
-
+
/* Adjust free size of the block if we padded. */
if (pad) {
struct jffs2_eraseblock *jeb;
@@ -495,7 +495,7 @@ static int __jffs2_flush_wbuf(struct jffs2_sb_info *c, int pad)
D1(printk(KERN_DEBUG "jffs2_flush_wbuf() adjusting free_size of %sblock at %08x\n",
(jeb==c->nextblock)?"next":"", jeb->offset));
- /* wbuf_pagesize - wbuf_len is the amount of space that's to be
+ /* wbuf_pagesize - wbuf_len is the amount of space that's to be
padded. If there is less free space in the block than that,
something screwed up */
if (jeb->free_size < (c->wbuf_pagesize - c->wbuf_len)) {
@@ -523,9 +523,9 @@ static int __jffs2_flush_wbuf(struct jffs2_sb_info *c, int pad)
return 0;
}
-/* Trigger garbage collection to flush the write-buffer.
+/* Trigger garbage collection to flush the write-buffer.
If ino arg is zero, do it if _any_ real (i.e. not GC) writes are
- outstanding. If ino arg non-zero, do it only if a write for the
+ outstanding. If ino arg non-zero, do it only if a write for the
given inode is outstanding. */
int jffs2_flush_wbuf_gc(struct jffs2_sb_info *c, uint32_t ino)
{
@@ -620,13 +620,13 @@ int jffs2_flash_writev(struct jffs2_sb_info *c, const struct kvec *invecs, unsig
/* If not NAND flash, don't bother */
if (!jffs2_is_writebuffered(c))
return jffs2_flash_direct_writev(c, invecs, count, to, retlen);
-
+
down_write(&c->wbuf_sem);
/* If wbuf_ofs is not initialized, set it to target address */
if (c->wbuf_ofs == 0xFFFFFFFF) {
c->wbuf_ofs = PAGE_DIV(to);
- c->wbuf_len = PAGE_MOD(to);
+ c->wbuf_len = PAGE_MOD(to);
memset(c->wbuf,0xff,c->wbuf_pagesize);
}
@@ -640,10 +640,10 @@ int jffs2_flash_writev(struct jffs2_sb_info *c, const struct kvec *invecs, unsig
memset(c->wbuf,0xff,c->wbuf_pagesize);
}
}
-
- /* Sanity checks on target address.
- It's permitted to write at PAD(c->wbuf_len+c->wbuf_ofs),
- and it's permitted to write at the beginning of a new
+
+ /* Sanity checks on target address.
+ It's permitted to write at PAD(c->wbuf_len+c->wbuf_ofs),
+ and it's permitted to write at the beginning of a new
erase block. Anything else, and you die.
New block starts at xxx000c (0-b = block header)
*/
@@ -661,8 +661,8 @@ int jffs2_flash_writev(struct jffs2_sb_info *c, const struct kvec *invecs, unsig
}
/* set pointer to new block */
c->wbuf_ofs = PAGE_DIV(to);
- c->wbuf_len = PAGE_MOD(to);
- }
+ c->wbuf_len = PAGE_MOD(to);
+ }
if (to != PAD(c->wbuf_ofs + c->wbuf_len)) {
/* We're not writing immediately after the writebuffer. Bad. */
@@ -682,21 +682,21 @@ int jffs2_flash_writev(struct jffs2_sb_info *c, const struct kvec *invecs, unsig
invec = 0;
outvec = 0;
- /* Fill writebuffer first, if already in use */
+ /* Fill writebuffer first, if already in use */
if (c->wbuf_len) {
uint32_t invec_ofs = 0;
- /* adjust alignment offset */
+ /* adjust alignment offset */
if (c->wbuf_len != PAGE_MOD(to)) {
c->wbuf_len = PAGE_MOD(to);
/* take care of alignment to next page */
if (!c->wbuf_len)
c->wbuf_len = c->wbuf_pagesize;
}
-
+
while(c->wbuf_len < c->wbuf_pagesize) {
uint32_t thislen;
-
+
if (invec == count)
goto alldone;
@@ -704,17 +704,17 @@ int jffs2_flash_writev(struct jffs2_sb_info *c, const struct kvec *invecs, unsig
if (thislen >= invecs[invec].iov_len)
thislen = invecs[invec].iov_len;
-
+
invec_ofs = thislen;
memcpy(c->wbuf + c->wbuf_len, invecs[invec].iov_base, thislen);
c->wbuf_len += thislen;
donelen += thislen;
/* Get next invec, if actual did not fill the buffer */
- if (c->wbuf_len < c->wbuf_pagesize)
+ if (c->wbuf_len < c->wbuf_pagesize)
invec++;
- }
-
+ }
+
/* write buffer is full, flush buffer */
ret = __jffs2_flush_wbuf(c, NOPAD);
if (ret) {
@@ -773,10 +773,10 @@ int jffs2_flash_writev(struct jffs2_sb_info *c, const struct kvec *invecs, unsig
/* We did cross a page boundary, so we write some now */
if (jffs2_cleanmarker_oob(c))
- ret = c->mtd->writev_ecc(c->mtd, outvecs, splitvec+1, outvec_to, &wbuf_retlen, NULL, c->oobinfo);
+ ret = c->mtd->writev_ecc(c->mtd, outvecs, splitvec+1, outvec_to, &wbuf_retlen, NULL, c->oobinfo);
else
ret = jffs2_flash_direct_writev(c, outvecs, splitvec+1, outvec_to, &wbuf_retlen);
-
+
if (ret < 0 || wbuf_retlen != PAGE_DIV(totlen)) {
/* At this point we have no problem,
c->wbuf is empty. However refile nextblock to avoid
@@ -793,7 +793,7 @@ int jffs2_flash_writev(struct jffs2_sb_info *c, const struct kvec *invecs, unsig
spin_unlock(&c->erase_completion_lock);
goto exit;
}
-
+
donelen += wbuf_retlen;
c->wbuf_ofs = PAGE_DIV(outvec_to) + PAGE_DIV(totlen);
@@ -837,7 +837,7 @@ alldone:
jffs2_wbuf_dirties_inode(c, ino);
ret = 0;
-
+
exit:
up_write(&c->wbuf_sem);
return ret;
@@ -880,18 +880,18 @@ int jffs2_flash_read(struct jffs2_sb_info *c, loff_t ofs, size_t len, size_t *re
if ( (ret == -EBADMSG) && (*retlen == len) ) {
printk(KERN_WARNING "mtd->read(0x%zx bytes from 0x%llx) returned ECC error\n",
len, ofs);
- /*
- * We have the raw data without ECC correction in the buffer, maybe
+ /*
+ * We have the raw data without ECC correction in the buffer, maybe
* we are lucky and all data or parts are correct. We check the node.
* If data are corrupted node check will sort it out.
* We keep this block, it will fail on write or erase and the we
* mark it bad. Or should we do that now? But we should give him a chance.
- * Maybe we had a system crash or power loss before the ecc write or
+ * Maybe we had a system crash or power loss before the ecc write or
* a erase was completed.
* So we return success. :)
*/
ret = 0;
- }
+ }
/* if no writebuffer available or write buffer empty, return */
if (!c->wbuf_pagesize || !c->wbuf_len)
@@ -906,16 +906,16 @@ int jffs2_flash_read(struct jffs2_sb_info *c, loff_t ofs, size_t len, size_t *re
if (owbf > c->wbuf_len) /* is read beyond write buffer ? */
goto exit;
lwbf = c->wbuf_len - owbf; /* number of bytes to copy */
- if (lwbf > len)
+ if (lwbf > len)
lwbf = len;
- } else {
+ } else {
orbf = (c->wbuf_ofs - ofs); /* offset in read buffer */
if (orbf > len) /* is write beyond write buffer ? */
goto exit;
lwbf = len - orbf; /* number of bytes to copy */
- if (lwbf > c->wbuf_len)
+ if (lwbf > c->wbuf_len)
lwbf = c->wbuf_len;
- }
+ }
if (lwbf > 0)
memcpy(buf+orbf,c->wbuf+owbf,lwbf);
@@ -943,7 +943,7 @@ int jffs2_check_oob_empty( struct jffs2_sb_info *c, struct jffs2_eraseblock *jeb
printk(KERN_NOTICE "jffs2_check_oob_empty(): allocation of temporary data buffer for oob check failed\n");
return -ENOMEM;
}
- /*
+ /*
* if mode = 0, we scan for a total empty oob area, else we have
* to take care of the cleanmarker in the first page of the block
*/
@@ -952,41 +952,41 @@ int jffs2_check_oob_empty( struct jffs2_sb_info *c, struct jffs2_eraseblock *jeb
D1(printk(KERN_WARNING "jffs2_check_oob_empty(): Read OOB failed %d for block at %08x\n", ret, jeb->offset));
goto out;
}
-
+
if (retlen < len) {
D1(printk(KERN_WARNING "jffs2_check_oob_empty(): Read OOB return short read "
"(%zd bytes not %d) for block at %08x\n", retlen, len, jeb->offset));
ret = -EIO;
goto out;
}
-
+
/* Special check for first page */
for(i = 0; i < oob_size ; i++) {
/* Yeah, we know about the cleanmarker. */
- if (mode && i >= c->fsdata_pos &&
+ if (mode && i >= c->fsdata_pos &&
i < c->fsdata_pos + c->fsdata_len)
continue;
if (buf[i] != 0xFF) {
D2(printk(KERN_DEBUG "Found %02x at %x in OOB for %08x\n",
buf[i], i, jeb->offset));
- ret = 1;
+ ret = 1;
goto out;
}
}
- /* we know, we are aligned :) */
+ /* we know, we are aligned :) */
for (page = oob_size; page < len; page += sizeof(long)) {
unsigned long dat = *(unsigned long *)(&buf[page]);
if(dat != -1) {
- ret = 1;
+ ret = 1;
goto out;
}
}
out:
- kfree(buf);
-
+ kfree(buf);
+
return ret;
}
@@ -1068,7 +1068,7 @@ int jffs2_write_nand_cleanmarker(struct jffs2_sb_info *c, struct jffs2_erasebloc
n.totlen = cpu_to_je32(8);
ret = jffs2_flash_write_oob(c, jeb->offset + c->fsdata_pos, c->fsdata_len, &retlen, (unsigned char *)&n);
-
+
if (ret) {
D1(printk(KERN_WARNING "jffs2_write_nand_cleanmarker(): Write failed for block at %08x: error %d\n", jeb->offset, ret));
return ret;
@@ -1080,7 +1080,7 @@ int jffs2_write_nand_cleanmarker(struct jffs2_sb_info *c, struct jffs2_erasebloc
return 0;
}
-/*
+/*
* On NAND we try to mark this block bad. If the block was erased more
* than MAX_ERASE_FAILURES we mark it finaly bad.
* Don't care about failures. This block remains on the erase-pending
@@ -1101,7 +1101,7 @@ int jffs2_write_nand_badblock(struct jffs2_sb_info *c, struct jffs2_eraseblock *
D1(printk(KERN_WARNING "jffs2_write_nand_badblock(): Marking bad block at %08x\n", bad_offset));
ret = c->mtd->block_markbad(c->mtd, bad_offset);
-
+
if (ret) {
D1(printk(KERN_WARNING "jffs2_write_nand_badblock(): Write failed for block at %08x: error %d\n", jeb->offset, ret));
return ret;
@@ -1125,7 +1125,7 @@ static int jffs2_nand_set_oobinfo(struct jffs2_sb_info *c)
/* Do this only, if we have an oob buffer */
if (!c->mtd->oobsize)
return 0;
-
+
/* Cleanmarker is out-of-band, so inline size zero */
c->cleanmarker_size = 0;
@@ -1151,7 +1151,7 @@ static int jffs2_nand_set_oobinfo(struct jffs2_sb_info *c)
c->fsdata_len = NAND_JFFS2_OOB16_FSDALEN;
c->badblock_pos = 15;
break;
-
+
default:
D1(printk(KERN_DEBUG "JFFS2 on NAND. No autoplacment info found\n"));
return -EINVAL;
@@ -1168,7 +1168,7 @@ int jffs2_nand_flash_setup(struct jffs2_sb_info *c)
init_rwsem(&c->wbuf_sem);
c->wbuf_pagesize = c->mtd->oobblock;
c->wbuf_ofs = 0xFFFFFFFF;
-
+
c->wbuf = kmalloc(c->wbuf_pagesize, GFP_KERNEL);
if (!c->wbuf)
return -ENOMEM;
@@ -1194,13 +1194,13 @@ void jffs2_nand_flash_cleanup(struct jffs2_sb_info *c)
int jffs2_dataflash_setup(struct jffs2_sb_info *c) {
c->cleanmarker_size = 0; /* No cleanmarkers needed */
-
+
/* Initialize write buffer */
init_rwsem(&c->wbuf_sem);
-
-
+
+
c->wbuf_pagesize = c->mtd->erasesize;
-
+
/* Find a suitable c->sector_size
* - Not too much sectors
* - Sectors have to be at least 4 K + some bytes
@@ -1210,11 +1210,11 @@ int jffs2_dataflash_setup(struct jffs2_sb_info *c) {
*/
c->sector_size = 8 * c->mtd->erasesize;
-
+
while (c->sector_size < 8192) {
c->sector_size *= 2;
}
-
+
/* It may be necessary to adjust the flash size */
c->flash_size = c->mtd->size;
@@ -1222,7 +1222,7 @@ int jffs2_dataflash_setup(struct jffs2_sb_info *c) {
c->flash_size = (c->flash_size / c->sector_size) * c->sector_size;
printk(KERN_WARNING "JFFS2 flash size adjusted to %dKiB\n", c->flash_size);
};
-
+
c->wbuf_ofs = 0xFFFFFFFF;
c->wbuf = kmalloc(c->wbuf_pagesize, GFP_KERNEL);
if (!c->wbuf)