diff options
Diffstat (limited to 'include/asm-arm/arch-davinci/gpio.h')
| -rw-r--r-- | include/asm-arm/arch-davinci/gpio.h | 156 |
1 files changed, 156 insertions, 0 deletions
diff --git a/include/asm-arm/arch-davinci/gpio.h b/include/asm-arm/arch-davinci/gpio.h new file mode 100644 index 000000000000..ea24a0e0bfd6 --- /dev/null +++ b/include/asm-arm/arch-davinci/gpio.h @@ -0,0 +1,156 @@ +/* + * TI DaVinci GPIO Support + * + * Copyright (c) 2006 David Brownell + * Copyright (c) 2007, MontaVista Software, Inc. <source@mvista.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __DAVINCI_GPIO_H +#define __DAVINCI_GPIO_H + +/* + * basic gpio routines + * + * board-specific init should be done by arch/.../.../board-XXX.c (maybe + * initializing banks together) rather than boot loaders; kexec() won't + * go through boot loaders. + * + * the gpio clock will be turned on when gpios are used, and you may also + * need to pay attention to PINMUX0 and PINMUX1 to be sure those pins are + * used as gpios, not with other peripherals. + * + * GPIOs are numbered 0..(DAVINCI_N_GPIO-1). For documentation, and maybe + * for later updates, code should write GPIO(N) or: + * - GPIOV18(N) for 1.8V pins, N in 0..53; same as GPIO(0)..GPIO(53) + * - GPIOV33(N) for 3.3V pins, N in 0..17; same as GPIO(54)..GPIO(70) + * + * For GPIO IRQs use gpio_to_irq(GPIO(N)) or gpio_to_irq(GPIOV33(N)) etc + * for now, that's != GPIO(N) + */ +#define GPIO(X) (X) /* 0 <= X <= 70 */ +#define GPIOV18(X) (X) /* 1.8V i/o; 0 <= X <= 53 */ +#define GPIOV33(X) ((X)+54) /* 3.3V i/o; 0 <= X <= 17 */ + +struct gpio_controller { + u32 dir; + u32 out_data; + u32 set_data; + u32 clr_data; + u32 in_data; + u32 set_rising; + u32 clr_rising; + u32 set_falling; + u32 clr_falling; + u32 intstat; +}; + +/* The __gpio_to_controller() and __gpio_mask() functions inline to constants + * with constant parameters; or in outlined code they execute at runtime. + * + * You'd access the controller directly when reading or writing more than + * one gpio value at a time, and to support wired logic where the value + * being driven by the cpu need not match the value read back. + * + * These are NOT part of the cross-platform GPIO interface + */ +static inline struct gpio_controller *__iomem +__gpio_to_controller(unsigned gpio) +{ + void *__iomem ptr; + + if (gpio < 32) + ptr = (void *__iomem)IO_ADDRESS(DAVINCI_GPIO_BASE + 0x10); + else if (gpio < 64) + ptr = (void *__iomem)IO_ADDRESS(DAVINCI_GPIO_BASE + 0x38); + else if (gpio < DAVINCI_N_GPIO) + ptr = (void *__iomem)IO_ADDRESS(DAVINCI_GPIO_BASE + 0x60); + else + ptr = NULL; + return ptr; +} + +static inline u32 __gpio_mask(unsigned gpio) +{ + return 1 << (gpio % 32); +} + +/* The get/set/clear functions will inline when called with constant + * parameters, for low-overhead bitbanging. Illegal constant parameters + * cause link-time errors. + * + * Otherwise, calls with variable parameters use outlined functions. + */ +extern int __error_inval_gpio(void); + +extern void __gpio_set(unsigned gpio, int value); +extern int __gpio_get(unsigned gpio); + +static inline void gpio_set_value(unsigned gpio, int value) +{ + if (__builtin_constant_p(value)) { + struct gpio_controller *__iomem g; + u32 mask; + + if (gpio >= DAVINCI_N_GPIO) + __error_inval_gpio(); + + g = __gpio_to_controller(gpio); + mask = __gpio_mask(gpio); + if (value) + __raw_writel(mask, &g->set_data); + else + __raw_writel(mask, &g->clr_data); + return; + } + + __gpio_set(gpio, value); +} + +/* Returns zero or nonzero; works for gpios configured as inputs OR + * as outputs. + * + * NOTE: changes in reported values are synchronized to the GPIO clock. + * This is most easily seen after calling gpio_set_value() and then immediatly + * gpio_get_value(), where the gpio_get_value() would return the old value + * until the GPIO clock ticks and the new value gets latched. + */ + +static inline int gpio_get_value(unsigned gpio) +{ + struct gpio_controller *__iomem g; + + if (!__builtin_constant_p(gpio)) + return __gpio_get(gpio); + + if (gpio >= DAVINCI_N_GPIO) + return __error_inval_gpio(); + + g = __gpio_to_controller(gpio); + return !!(__gpio_mask(gpio) & __raw_readl(&g->in_data)); +} + +/* powerup default direction is IN */ +extern int gpio_direction_input(unsigned gpio); +extern int gpio_direction_output(unsigned gpio, int value); + +#include <asm-generic/gpio.h> /* cansleep wrappers */ + +extern int gpio_request(unsigned gpio, const char *tag); +extern void gpio_free(unsigned gpio); + +static inline int gpio_to_irq(unsigned gpio) +{ + return DAVINCI_N_AINTC_IRQ + gpio; +} + +static inline int irq_to_gpio(unsigned irq) +{ + return irq - DAVINCI_N_AINTC_IRQ; +} + +#endif /* __DAVINCI_GPIO_H */ |