diff options
Diffstat (limited to 'include/asm-arm/arch-pxa/pxa-regs.h')
| -rw-r--r-- | include/asm-arm/arch-pxa/pxa-regs.h | 24 |
1 files changed, 11 insertions, 13 deletions
diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h index e24f6b6c79ae..aec835b6f057 100644 --- a/include/asm-arm/arch-pxa/pxa-regs.h +++ b/include/asm-arm/arch-pxa/pxa-regs.h @@ -463,9 +463,6 @@ * Serial Audio Controller */ -/* FIXME: This clash with SA1111 defines */ -#ifndef _ASM_ARCH_SA1111 - #define SACR0 __REG(0x40400000) /* Global Control Register */ #define SACR1 __REG(0x40400004) /* Serial Audio I 2 S/MSB-Justified Control Register */ #define SASR0 __REG(0x4040000C) /* Serial Audio I 2 S/MSB-Justified Interface and FIFO Status Register */ @@ -474,8 +471,8 @@ #define SADIV __REG(0x40400060) /* Audio Clock Divider Register. */ #define SADR __REG(0x40400080) /* Serial Audio Data Register (TX and RX FIFO access Register). */ -#define SACR0_RFTH(x) (x << 12) /* Rx FIFO Interrupt or DMA Trigger Threshold */ -#define SACR0_TFTH(x) (x << 8) /* Tx FIFO Interrupt or DMA Trigger Threshold */ +#define SACR0_RFTH(x) ((x) << 12) /* Rx FIFO Interrupt or DMA Trigger Threshold */ +#define SACR0_TFTH(x) ((x) << 8) /* Tx FIFO Interrupt or DMA Trigger Threshold */ #define SACR0_STRF (1 << 5) /* FIFO Select for EFWR Special Function */ #define SACR0_EFWR (1 << 4) /* Enable EFWR Function */ #define SACR0_RST (1 << 3) /* FIFO, i2s Register Reset */ @@ -503,8 +500,6 @@ #define SAIMR_RFS (1 << 4) /* Enable Rx FIFO Service Interrupt */ #define SAIMR_TFS (1 << 3) /* Enable Tx FIFO Service Interrupt */ -#endif - /* * AC97 Controller registers */ @@ -1682,15 +1677,18 @@ #define SSSR_PINT (1 << 18) /* Peripheral Trailing Byte Interrupt */ #define SSPSP_FSRT (1 << 25) /* Frame Sync Relative Timing */ -#define SSPSP_DMYSTOP(x) (x << 23) /* Dummy Stop */ -#define SSPSP_SFRMWDTH(x) (x << 16) /* Serial Frame Width */ -#define SSPSP_SFRMDLY(x) (x << 9) /* Serial Frame Delay */ -#define SSPSP_DMYSTRT(x) (x << 7) /* Dummy Start */ -#define SSPSP_STRTDLY(x) (x << 4) /* Start Delay */ +#define SSPSP_DMYSTOP(x) ((x) << 23) /* Dummy Stop */ +#define SSPSP_SFRMWDTH(x) ((x) << 16) /* Serial Frame Width */ +#define SSPSP_SFRMDLY(x) ((x) << 9) /* Serial Frame Delay */ +#define SSPSP_DMYSTRT(x) ((x) << 7) /* Dummy Start */ +#define SSPSP_STRTDLY(x) ((x) << 4) /* Start Delay */ #define SSPSP_ETDS (1 << 3) /* End of Transfer data State */ #define SSPSP_SFRMP (1 << 2) /* Serial Frame Polarity */ -#define SSPSP_SCMODE(x) (x << 0) /* Serial Bit Rate Clock Mode */ +#define SSPSP_SCMODE(x) ((x) << 0) /* Serial Bit Rate Clock Mode */ +#define SSACD_SCDB (1 << 3) /* SSPSYSCLK Divider Bypass */ +#define SSACD_ACPS(x) ((x) << 4) /* Audio clock PLL select */ +#define SSACD_ACDS(x) ((x) << 0) /* Audio clock divider select */ #define SSCR0_P1 __REG(0x41000000) /* SSP Port 1 Control Register 0 */ #define SSCR1_P1 __REG(0x41000004) /* SSP Port 1 Control Register 1 */ |