diff options
Diffstat (limited to 'include/asm-arm/uaccess.h')
| -rw-r--r-- | include/asm-arm/uaccess.h | 444 |
1 files changed, 0 insertions, 444 deletions
diff --git a/include/asm-arm/uaccess.h b/include/asm-arm/uaccess.h deleted file mode 100644 index 4c1a3fa9f259..000000000000 --- a/include/asm-arm/uaccess.h +++ /dev/null @@ -1,444 +0,0 @@ -/* - * linux/include/asm-arm/uaccess.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef _ASMARM_UACCESS_H -#define _ASMARM_UACCESS_H - -/* - * User space memory access functions - */ -#include <linux/sched.h> -#include <asm/errno.h> -#include <asm/memory.h> -#include <asm/domain.h> -#include <asm/system.h> - -#define VERIFY_READ 0 -#define VERIFY_WRITE 1 - -/* - * The exception table consists of pairs of addresses: the first is the - * address of an instruction that is allowed to fault, and the second is - * the address at which the program should continue. No registers are - * modified, so it is entirely up to the continuation code to figure out - * what to do. - * - * All the routines below use bits of fixup code that are out of line - * with the main instruction path. This means when everything is well, - * we don't even have to jump over them. Further, they do not intrude - * on our cache or tlb entries. - */ - -struct exception_table_entry -{ - unsigned long insn, fixup; -}; - -extern int fixup_exception(struct pt_regs *regs); - -/* - * These two are intentionally not defined anywhere - if the kernel - * code generates any references to them, that's a bug. - */ -extern int __get_user_bad(void); -extern int __put_user_bad(void); - -/* - * Note that this is actually 0x1,0000,0000 - */ -#define KERNEL_DS 0x00000000 -#define get_ds() (KERNEL_DS) - -#ifdef CONFIG_MMU - -#define USER_DS TASK_SIZE -#define get_fs() (current_thread_info()->addr_limit) - -static inline void set_fs(mm_segment_t fs) -{ - current_thread_info()->addr_limit = fs; - modify_domain(DOMAIN_KERNEL, fs ? DOMAIN_CLIENT : DOMAIN_MANAGER); -} - -#define segment_eq(a,b) ((a) == (b)) - -#define __addr_ok(addr) ({ \ - unsigned long flag; \ - __asm__("cmp %2, %0; movlo %0, #0" \ - : "=&r" (flag) \ - : "0" (current_thread_info()->addr_limit), "r" (addr) \ - : "cc"); \ - (flag == 0); }) - -/* We use 33-bit arithmetic here... */ -#define __range_ok(addr,size) ({ \ - unsigned long flag, roksum; \ - __chk_user_ptr(addr); \ - __asm__("adds %1, %2, %3; sbcccs %1, %1, %0; movcc %0, #0" \ - : "=&r" (flag), "=&r" (roksum) \ - : "r" (addr), "Ir" (size), "0" (current_thread_info()->addr_limit) \ - : "cc"); \ - flag; }) - -/* - * Single-value transfer routines. They automatically use the right - * size if we just have the right pointer type. Note that the functions - * which read from user space (*get_*) need to take care not to leak - * kernel data even if the calling code is buggy and fails to check - * the return value. This means zeroing out the destination variable - * or buffer on error. Normally this is done out of line by the - * fixup code, but there are a few places where it intrudes on the - * main code path. When we only write to user space, there is no - * problem. - */ -extern int __get_user_1(void *); -extern int __get_user_2(void *); -extern int __get_user_4(void *); - -#define __get_user_x(__r2,__p,__e,__s,__i...) \ - __asm__ __volatile__ ( \ - __asmeq("%0", "r0") __asmeq("%1", "r2") \ - "bl __get_user_" #__s \ - : "=&r" (__e), "=r" (__r2) \ - : "0" (__p) \ - : __i, "cc") - -#define get_user(x,p) \ - ({ \ - register const typeof(*(p)) __user *__p asm("r0") = (p);\ - register unsigned long __r2 asm("r2"); \ - register int __e asm("r0"); \ - switch (sizeof(*(__p))) { \ - case 1: \ - __get_user_x(__r2, __p, __e, 1, "lr"); \ - break; \ - case 2: \ - __get_user_x(__r2, __p, __e, 2, "r3", "lr"); \ - break; \ - case 4: \ - __get_user_x(__r2, __p, __e, 4, "lr"); \ - break; \ - default: __e = __get_user_bad(); break; \ - } \ - x = (typeof(*(p))) __r2; \ - __e; \ - }) - -extern int __put_user_1(void *, unsigned int); -extern int __put_user_2(void *, unsigned int); -extern int __put_user_4(void *, unsigned int); -extern int __put_user_8(void *, unsigned long long); - -#define __put_user_x(__r2,__p,__e,__s) \ - __asm__ __volatile__ ( \ - __asmeq("%0", "r0") __asmeq("%2", "r2") \ - "bl __put_user_" #__s \ - : "=&r" (__e) \ - : "0" (__p), "r" (__r2) \ - : "ip", "lr", "cc") - -#define put_user(x,p) \ - ({ \ - register const typeof(*(p)) __r2 asm("r2") = (x); \ - register const typeof(*(p)) __user *__p asm("r0") = (p);\ - register int __e asm("r0"); \ - switch (sizeof(*(__p))) { \ - case 1: \ - __put_user_x(__r2, __p, __e, 1); \ - break; \ - case 2: \ - __put_user_x(__r2, __p, __e, 2); \ - break; \ - case 4: \ - __put_user_x(__r2, __p, __e, 4); \ - break; \ - case 8: \ - __put_user_x(__r2, __p, __e, 8); \ - break; \ - default: __e = __put_user_bad(); break; \ - } \ - __e; \ - }) - -#else /* CONFIG_MMU */ - -/* - * uClinux has only one addr space, so has simplified address limits. - */ -#define USER_DS KERNEL_DS - -#define segment_eq(a,b) (1) -#define __addr_ok(addr) (1) -#define __range_ok(addr,size) (0) -#define get_fs() (KERNEL_DS) - -static inline void set_fs(mm_segment_t fs) -{ -} - -#define get_user(x,p) __get_user(x,p) -#define put_user(x,p) __put_user(x,p) - -#endif /* CONFIG_MMU */ - -#define access_ok(type,addr,size) (__range_ok(addr,size) == 0) - -/* - * The "__xxx" versions of the user access functions do not verify the - * address space - it must have been done previously with a separate - * "access_ok()" call. - * - * The "xxx_error" versions set the third argument to EFAULT if an - * error occurs, and leave it unchanged on success. Note that these - * versions are void (ie, don't return a value as such). - */ -#define __get_user(x,ptr) \ -({ \ - long __gu_err = 0; \ - __get_user_err((x),(ptr),__gu_err); \ - __gu_err; \ -}) - -#define __get_user_error(x,ptr,err) \ -({ \ - __get_user_err((x),(ptr),err); \ - (void) 0; \ -}) - -#define __get_user_err(x,ptr,err) \ -do { \ - unsigned long __gu_addr = (unsigned long)(ptr); \ - unsigned long __gu_val; \ - __chk_user_ptr(ptr); \ - switch (sizeof(*(ptr))) { \ - case 1: __get_user_asm_byte(__gu_val,__gu_addr,err); break; \ - case 2: __get_user_asm_half(__gu_val,__gu_addr,err); break; \ - case 4: __get_user_asm_word(__gu_val,__gu_addr,err); break; \ - default: (__gu_val) = __get_user_bad(); \ - } \ - (x) = (__typeof__(*(ptr)))__gu_val; \ -} while (0) - -#define __get_user_asm_byte(x,addr,err) \ - __asm__ __volatile__( \ - "1: ldrbt %1,[%2],#0\n" \ - "2:\n" \ - " .section .fixup,\"ax\"\n" \ - " .align 2\n" \ - "3: mov %0, %3\n" \ - " mov %1, #0\n" \ - " b 2b\n" \ - " .previous\n" \ - " .section __ex_table,\"a\"\n" \ - " .align 3\n" \ - " .long 1b, 3b\n" \ - " .previous" \ - : "+r" (err), "=&r" (x) \ - : "r" (addr), "i" (-EFAULT) \ - : "cc") - -#ifndef __ARMEB__ -#define __get_user_asm_half(x,__gu_addr,err) \ -({ \ - unsigned long __b1, __b2; \ - __get_user_asm_byte(__b1, __gu_addr, err); \ - __get_user_asm_byte(__b2, __gu_addr + 1, err); \ - (x) = __b1 | (__b2 << 8); \ -}) -#else -#define __get_user_asm_half(x,__gu_addr,err) \ -({ \ - unsigned long __b1, __b2; \ - __get_user_asm_byte(__b1, __gu_addr, err); \ - __get_user_asm_byte(__b2, __gu_addr + 1, err); \ - (x) = (__b1 << 8) | __b2; \ -}) -#endif - -#define __get_user_asm_word(x,addr,err) \ - __asm__ __volatile__( \ - "1: ldrt %1,[%2],#0\n" \ - "2:\n" \ - " .section .fixup,\"ax\"\n" \ - " .align 2\n" \ - "3: mov %0, %3\n" \ - " mov %1, #0\n" \ - " b 2b\n" \ - " .previous\n" \ - " .section __ex_table,\"a\"\n" \ - " .align 3\n" \ - " .long 1b, 3b\n" \ - " .previous" \ - : "+r" (err), "=&r" (x) \ - : "r" (addr), "i" (-EFAULT) \ - : "cc") - -#define __put_user(x,ptr) \ -({ \ - long __pu_err = 0; \ - __put_user_err((x),(ptr),__pu_err); \ - __pu_err; \ -}) - -#define __put_user_error(x,ptr,err) \ -({ \ - __put_user_err((x),(ptr),err); \ - (void) 0; \ -}) - -#define __put_user_err(x,ptr,err) \ -do { \ - unsigned long __pu_addr = (unsigned long)(ptr); \ - __typeof__(*(ptr)) __pu_val = (x); \ - __chk_user_ptr(ptr); \ - switch (sizeof(*(ptr))) { \ - case 1: __put_user_asm_byte(__pu_val,__pu_addr,err); break; \ - case 2: __put_user_asm_half(__pu_val,__pu_addr,err); break; \ - case 4: __put_user_asm_word(__pu_val,__pu_addr,err); break; \ - case 8: __put_user_asm_dword(__pu_val,__pu_addr,err); break; \ - default: __put_user_bad(); \ - } \ -} while (0) - -#define __put_user_asm_byte(x,__pu_addr,err) \ - __asm__ __volatile__( \ - "1: strbt %1,[%2],#0\n" \ - "2:\n" \ - " .section .fixup,\"ax\"\n" \ - " .align 2\n" \ - "3: mov %0, %3\n" \ - " b 2b\n" \ - " .previous\n" \ - " .section __ex_table,\"a\"\n" \ - " .align 3\n" \ - " .long 1b, 3b\n" \ - " .previous" \ - : "+r" (err) \ - : "r" (x), "r" (__pu_addr), "i" (-EFAULT) \ - : "cc") - -#ifndef __ARMEB__ -#define __put_user_asm_half(x,__pu_addr,err) \ -({ \ - unsigned long __temp = (unsigned long)(x); \ - __put_user_asm_byte(__temp, __pu_addr, err); \ - __put_user_asm_byte(__temp >> 8, __pu_addr + 1, err); \ -}) -#else -#define __put_user_asm_half(x,__pu_addr,err) \ -({ \ - unsigned long __temp = (unsigned long)(x); \ - __put_user_asm_byte(__temp >> 8, __pu_addr, err); \ - __put_user_asm_byte(__temp, __pu_addr + 1, err); \ -}) -#endif - -#define __put_user_asm_word(x,__pu_addr,err) \ - __asm__ __volatile__( \ - "1: strt %1,[%2],#0\n" \ - "2:\n" \ - " .section .fixup,\"ax\"\n" \ - " .align 2\n" \ - "3: mov %0, %3\n" \ - " b 2b\n" \ - " .previous\n" \ - " .section __ex_table,\"a\"\n" \ - " .align 3\n" \ - " .long 1b, 3b\n" \ - " .previous" \ - : "+r" (err) \ - : "r" (x), "r" (__pu_addr), "i" (-EFAULT) \ - : "cc") - -#ifndef __ARMEB__ -#define __reg_oper0 "%R2" -#define __reg_oper1 "%Q2" -#else -#define __reg_oper0 "%Q2" -#define __reg_oper1 "%R2" -#endif - -#define __put_user_asm_dword(x,__pu_addr,err) \ - __asm__ __volatile__( \ - "1: strt " __reg_oper1 ", [%1], #4\n" \ - "2: strt " __reg_oper0 ", [%1], #0\n" \ - "3:\n" \ - " .section .fixup,\"ax\"\n" \ - " .align 2\n" \ - "4: mov %0, %3\n" \ - " b 3b\n" \ - " .previous\n" \ - " .section __ex_table,\"a\"\n" \ - " .align 3\n" \ - " .long 1b, 4b\n" \ - " .long 2b, 4b\n" \ - " .previous" \ - : "+r" (err), "+r" (__pu_addr) \ - : "r" (x), "i" (-EFAULT) \ - : "cc") - - -#ifdef CONFIG_MMU -extern unsigned long __must_check __copy_from_user(void *to, const void __user *from, unsigned long n); -extern unsigned long __must_check __copy_to_user(void __user *to, const void *from, unsigned long n); -extern unsigned long __must_check __clear_user(void __user *addr, unsigned long n); -#else -#define __copy_from_user(to,from,n) (memcpy(to, (void __force *)from, n), 0) -#define __copy_to_user(to,from,n) (memcpy((void __force *)to, from, n), 0) -#define __clear_user(addr,n) (memset((void __force *)addr, 0, n), 0) -#endif - -extern unsigned long __must_check __strncpy_from_user(char *to, const char __user *from, unsigned long count); -extern unsigned long __must_check __strnlen_user(const char __user *s, long n); - -static inline unsigned long __must_check copy_from_user(void *to, const void __user *from, unsigned long n) -{ - if (access_ok(VERIFY_READ, from, n)) - n = __copy_from_user(to, from, n); - else /* security hole - plug it */ - memzero(to, n); - return n; -} - -static inline unsigned long __must_check copy_to_user(void __user *to, const void *from, unsigned long n) -{ - if (access_ok(VERIFY_WRITE, to, n)) - n = __copy_to_user(to, from, n); - return n; -} - -#define __copy_to_user_inatomic __copy_to_user -#define __copy_from_user_inatomic __copy_from_user - -static inline unsigned long __must_check clear_user(void __user *to, unsigned long n) -{ - if (access_ok(VERIFY_WRITE, to, n)) - n = __clear_user(to, n); - return n; -} - -static inline long __must_check strncpy_from_user(char *dst, const char __user *src, long count) -{ - long res = -EFAULT; - if (access_ok(VERIFY_READ, src, 1)) - res = __strncpy_from_user(dst, src, count); - return res; -} - -#define strlen_user(s) strnlen_user(s, ~0UL >> 1) - -static inline long __must_check strnlen_user(const char __user *s, long n) -{ - unsigned long res = 0; - - if (__addr_ok(s)) - res = __strnlen_user(s, n); - - return res; -} - -#endif /* _ASMARM_UACCESS_H */ |