diff options
Diffstat (limited to 'include/asm-blackfin/mach-bf548')
| -rw-r--r-- | include/asm-blackfin/mach-bf548/anomaly.h | 72 | ||||
| -rw-r--r-- | include/asm-blackfin/mach-bf548/bf548.h | 284 | ||||
| -rw-r--r-- | include/asm-blackfin/mach-bf548/bfin_serial_5xx.h | 147 | ||||
| -rw-r--r-- | include/asm-blackfin/mach-bf548/blackfin.h | 166 | ||||
| -rw-r--r-- | include/asm-blackfin/mach-bf548/dma.h | 63 | ||||
| -rw-r--r-- | include/asm-blackfin/mach-bf548/irq.h | 306 | ||||
| -rw-r--r-- | include/asm-blackfin/mach-bf548/mem_init.h | 189 | ||||
| -rw-r--r-- | include/asm-blackfin/mach-bf548/mem_map.h | 97 |
8 files changed, 1324 insertions, 0 deletions
diff --git a/include/asm-blackfin/mach-bf548/anomaly.h b/include/asm-blackfin/mach-bf548/anomaly.h new file mode 100644 index 000000000000..ddc150e6fb0f --- /dev/null +++ b/include/asm-blackfin/mach-bf548/anomaly.h @@ -0,0 +1,72 @@ + +/* + * File: include/asm-blackfin/mach-bf548/anomaly.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _MACH_ANOMALY_H_ +#define _MACH_ANOMALY_H_ +#define ANOMALY_05000074 /* A multi issue instruction with dsp32shiftimm in + slot1 and store of a P register in slot 2 is not + supported */ +#define ANOMALY_05000119 /* DMA_RUN bit is not valid after a Peripheral Receive + Channel DMA stops */ +#define ANOMALY_05000122 /* Rx.H can not be used to access 16-bit System MMR + registers. */ +#define ANOMALY_05000245 /* Spurious Hardware Error from an Access in the + Shadow of a Conditional Branch */ +#define ANOMALY_05000255 /* Entering Hibernate Mode with RTC Seconds event + interrupt not functional */ +#define ANOMALY_05000265 /* Sensitivity to noise with slow input edge rates on + SPORT external receive and transmit clocks. */ +#define ANOMALY_05000272 /* Certain data cache write through modes fail for + VDDint <=0.9V */ +#define ANOMALY_05000310 /* False Hardware Errors Caused by Fetches at the + Boundary of Reserved Memory */ +#define ANOMALY_05000312 /* Errors When SSYNC, CSYNC, or Loads to LT, LB and + LC Registers Are Interrupted */ +#define ANOMALY_05000324 /* TWI Slave Boot Mode Is Not Functional */ +#define ANOMALY_05000325 /* External FIFO Boot Mode Is Not Functional */ +#define ANOMALY_05000327 /* Data Lost When Core and DMA Accesses Are Made to + the USB FIFO Simultaneously */ +#define ANOMALY_05000328 /* Incorrect Access of OTP_STATUS During otp_write() + function */ +#define ANOMALY_05000329 /* Synchronous Burst Flash Boot Mode Is Not Functional + */ +#define ANOMALY_05000330 /* Host DMA Boot Mode Is Not Functional */ +#define ANOMALY_05000334 /* Inadequate Timing Margins on DDR DQS to DQ and DQM + Skew */ +#define ANOMALY_05000335 /* Inadequate Rotary Debounce Logic Duration */ +#define ANOMALY_05000336 /* Phantom Interrupt Occurs After First Configuration + of Host DMA Port */ +#define ANOMALY_05000337 /* Disallowed Configuration Prevents Subsequent + Allowed Configuration on Host DMA Port */ +#define ANOMALY_05000338 /* Slave-Mode SPI0 MISO Failure With CPHA = 0 */ + +#endif /* _MACH_ANOMALY_H_ */ diff --git a/include/asm-blackfin/mach-bf548/bf548.h b/include/asm-blackfin/mach-bf548/bf548.h new file mode 100644 index 000000000000..0b211020443d --- /dev/null +++ b/include/asm-blackfin/mach-bf548/bf548.h @@ -0,0 +1,284 @@ +/* + * File: include/asm-blackfin/mach-bf548/bf548.h + * Based on: + * Author: + * + * Created: + * Description: System MMR register and memory map for ADSP-BF548 + * + * Modified: + * Copyright 2004-2007 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef __MACH_BF548_H__ +#define __MACH_BF548_H__ + +/* Masks for generic ERROR IRQ demultiplexing used in int-priority-sc.c */ + +#define SPI_ERR_MASK (TXCOL | RBSY | MODF | TXE) /* SPI_STAT */ +#define SPORT_ERR_MASK (ROVF | RUVF | TOVF | TUVF) /* SPORTx_STAT */ +#define PPI_ERR_MASK (0xFFFF & ~FLD) /* PPI_STATUS */ +#define UART_ERR_MASK_STAT1 (0x4) /* UARTx_IIR */ +#define UART_ERR_MASK_STAT0 (0x2) /* UARTx_IIR */ +#define CAN_ERR_MASK (EWTIF | EWRIF | EPIF | BOIF | WUIF | UIAIF | AAIF | \ + RMLIF | UCEIF | EXTIF | ADIF) /* CAN_GIF */ + +#define OFFSET_(x) ((x) & 0x0000FFFF) + +/*some misc defines*/ +#define IMASK_IVG15 0x8000 +#define IMASK_IVG14 0x4000 +#define IMASK_IVG13 0x2000 +#define IMASK_IVG12 0x1000 + +#define IMASK_IVG11 0x0800 +#define IMASK_IVG10 0x0400 +#define IMASK_IVG9 0x0200 +#define IMASK_IVG8 0x0100 + +#define IMASK_IVG7 0x0080 +#define IMASK_IVGTMR 0x0040 +#define IMASK_IVGHW 0x0020 + +/***************************/ + + +#define BLKFIN_DSUBBANKS 4 +#define BLKFIN_DWAYS 2 +#define BLKFIN_DLINES 64 +#define BLKFIN_ISUBBANKS 4 +#define BLKFIN_IWAYS 4 +#define BLKFIN_ILINES 32 + +#define WAY0_L 0x1 +#define WAY1_L 0x2 +#define WAY01_L 0x3 +#define WAY2_L 0x4 +#define WAY02_L 0x5 +#define WAY12_L 0x6 +#define WAY012_L 0x7 + +#define WAY3_L 0x8 +#define WAY03_L 0x9 +#define WAY13_L 0xA +#define WAY013_L 0xB + +#define WAY32_L 0xC +#define WAY320_L 0xD +#define WAY321_L 0xE +#define WAYALL_L 0xF + +#define DMC_ENABLE (2<<2) /*yes, 2, not 1 */ + +/********************************* EBIU Settings ************************************/ +#define AMBCTL0VAL ((CONFIG_BANK_1 << 16) | CONFIG_BANK_0) +#define AMBCTL1VAL ((CONFIG_BANK_3 << 16) | CONFIG_BANK_2) + +#ifdef CONFIG_C_AMBEN_ALL +#define V_AMBEN AMBEN_ALL +#endif +#ifdef CONFIG_C_AMBEN +#define V_AMBEN 0x0 +#endif +#ifdef CONFIG_C_AMBEN_B0 +#define V_AMBEN AMBEN_B0 +#endif +#ifdef CONFIG_C_AMBEN_B0_B1 +#define V_AMBEN AMBEN_B0_B1 +#endif +#ifdef CONFIG_C_AMBEN_B0_B1_B2 +#define V_AMBEN AMBEN_B0_B1_B2 +#endif +#ifdef CONFIG_C_AMCKEN +#define V_AMCKEN AMCKEN +#else +#define V_AMCKEN 0x0 +#endif +#ifdef CONFIG_C_CDPRIO +#define V_CDPRIO 0x100 +#else +#define V_CDPRIO 0x0 +#endif + +#define AMGCTLVAL (V_AMBEN | V_AMCKEN | V_CDPRIO) + +#define MAX_VC 650000000 +#define MIN_VC 50000000 + +/********************************PLL Settings **************************************/ +#ifdef CONFIG_BFIN_KERNEL_CLOCK +#if (CONFIG_VCO_MULT < 0) +#error "VCO Multiplier is less than 0. Please select a different value" +#endif + +#if (CONFIG_VCO_MULT == 0) +#error "VCO Multiplier should be greater than 0. Please select a different value" +#endif + +#if (CONFIG_VCO_MULT > 64) +#error "VCO Multiplier is more than 64. Please select a different value" +#endif + +#ifndef CONFIG_CLKIN_HALF +#define CONFIG_VCO_HZ (CONFIG_CLKIN_HZ * CONFIG_VCO_MULT) +#else +#define CONFIG_VCO_HZ ((CONFIG_CLKIN_HZ * CONFIG_VCO_MULT)/2) +#endif + +#ifndef CONFIG_PLL_BYPASS +#define CONFIG_CCLK_HZ (CONFIG_VCO_HZ/CONFIG_CCLK_DIV) +#define CONFIG_SCLK_HZ (CONFIG_VCO_HZ/CONFIG_SCLK_DIV) +#else +#define CONFIG_CCLK_HZ CONFIG_CLKIN_HZ +#define CONFIG_SCLK_HZ CONFIG_CLKIN_HZ +#endif + +#if (CONFIG_SCLK_DIV < 1) +#error "SCLK DIV cannot be less than 1 or more than 15. Please select a proper value" +#endif + +#if (CONFIG_SCLK_DIV > 15) +#error "SCLK DIV cannot be less than 1 or more than 15. Please select a proper value" +#endif + +#if (CONFIG_CCLK_DIV != 1) +#if (CONFIG_CCLK_DIV != 2) +#if (CONFIG_CCLK_DIV != 4) +#if (CONFIG_CCLK_DIV != 8) +#error "CCLK DIV can be 1,2,4 or 8 only. Please select a proper value" +#endif +#endif +#endif +#endif + +#if (CONFIG_VCO_HZ > MAX_VC) +#error "VCO selected is more than maximum value. Please change the VCO multipler" +#endif + +#if (CONFIG_SCLK_HZ > 133000000) +#error "Sclk value selected is more than maximum. Please select a proper value for SCLK multiplier" +#endif + +#if (CONFIG_SCLK_HZ < 27000000) +#error "Sclk value selected is less than minimum. Please select a proper value for SCLK multiplier" +#endif + +#if (CONFIG_SCLK_HZ >= CONFIG_CCLK_HZ) +#if (CONFIG_SCLK_HZ != CONFIG_CLKIN_HZ) +#if (CONFIG_CCLK_HZ != CONFIG_CLKIN_HZ) +#error "Please select sclk less than cclk" +#endif +#endif +#endif + +#if (CONFIG_CCLK_DIV == 1) +#define CONFIG_CCLK_ACT_DIV CCLK_DIV1 +#endif +#if (CONFIG_CCLK_DIV == 2) +#define CONFIG_CCLK_ACT_DIV CCLK_DIV2 +#endif +#if (CONFIG_CCLK_DIV == 4) +#define CONFIG_CCLK_ACT_DIV CCLK_DIV4 +#endif +#if (CONFIG_CCLK_DIV == 8) +#define CONFIG_CCLK_ACT_DIV CCLK_DIV8 +#endif +#ifndef CONFIG_CCLK_ACT_DIV +#define CONFIG_CCLK_ACT_DIV CONFIG_CCLK_DIV_not_defined_properly +#endif + +#endif /* CONFIG_BFIN_KERNEL_CLOCK */ + +#ifdef CONFIG_BF542 +#define CPU "BF542" +#define CPUID 0x027c8000 +#endif +#ifdef CONFIG_BF544 +#define CPU "BF544" +#define CPUID 0x027c8000 +#endif +#ifdef CONFIG_BF548 +#define CPU "BF548" +#define CPUID 0x027c6000 +#endif +#ifdef CONFIG_BF549 +#define CPU "BF549" +#endif +#ifndef CPU +#define CPU "UNKNOWN" +#define CPUID 0x0 +#endif + +#if (CONFIG_MEM_SIZE % 4) +#error "SDRAM mem size must be multible of 4MB" +#endif + +#define SDRAM_IGENERIC (CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | CPLB_PORTPRIO) +#define SDRAM_IKERNEL (SDRAM_IGENERIC | CPLB_LOCK) +#define L1_IMEMORY ( CPLB_USER_RD | CPLB_VALID | CPLB_LOCK) +#define SDRAM_INON_CHBL ( CPLB_USER_RD | CPLB_VALID) + +/*Use the menuconfig cache policy here - CONFIG_BLKFIN_WT/CONFIG_BLKFIN_WB*/ + +#define ANOMALY_05000158_WORKAROUND 0x200 +#ifdef CONFIG_BLKFIN_WB /*Write Back Policy */ +#define SDRAM_DGENERIC (CPLB_L1_CHBL | CPLB_DIRTY \ + | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND) +#else /*Write Through */ +#define SDRAM_DGENERIC (CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW \ + | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_DIRTY ) +#endif + + +#define L1_DMEMORY (CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_LOCK | CPLB_DIRTY ) +#define SDRAM_DNON_CHBL (CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_DIRTY ) +#define SDRAM_EBIU (CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_DIRTY ) +#define SDRAM_OOPS (CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_LOCK | CPLB_DIRTY ) + +#define SIZE_1K 0x00000400 /* 1K */ +#define SIZE_4K 0x00001000 /* 4K */ +#define SIZE_1M 0x00100000 /* 1M */ +#define SIZE_4M 0x00400000 /* 4M */ + +#define MAX_CPLBS (16 * 2) + +/* +* Number of required data CPLB switchtable entries +* MEMSIZE / 4 (we mostly install 4M page size CPLBs +* approx 16 for smaller 1MB page size CPLBs for allignment purposes +* 1 for L1 Data Memory +* 1 for CONFIG_DEBUG_HUNT_FOR_ZERO +* 1 for ASYNC Memory +*/ + + +#define MAX_SWITCH_D_CPLBS (((CONFIG_MEM_SIZE / 4) + 16 + 1 + 1 + 1) * 2) + +/* +* Number of required instruction CPLB switchtable entries +* MEMSIZE / 4 (we mostly install 4M page size CPLBs +* approx 12 for smaller 1MB page size CPLBs for allignment purposes +* 1 for L1 Instruction Memory +* 1 for CONFIG_DEBUG_HUNT_FOR_ZERO +*/ + +#define MAX_SWITCH_I_CPLBS (((CONFIG_MEM_SIZE / 4) + 12 + 1 + 1) * 2) + +#endif /* __MACH_BF48_H__ */ diff --git a/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h new file mode 100644 index 000000000000..8f5d9c4d8d5b --- /dev/null +++ b/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h @@ -0,0 +1,147 @@ +#include <linux/serial.h> +#include <asm/dma.h> + +#define NR_PORTS 2 + +#define OFFSET_THR 0x00 /* Transmit Holding register */ +#define OFFSET_RBR 0x00 /* Receive Buffer register */ +#define OFFSET_DLL 0x00 /* Divisor Latch (Low-Byte) */ +#define OFFSET_IER 0x04 /* Interrupt Enable Register */ +#define OFFSET_DLH 0x04 /* Divisor Latch (High-Byte) */ +#define OFFSET_IIR 0x08 /* Interrupt Identification Register */ +#define OFFSET_LCR 0x0C /* Line Control Register */ +#define OFFSET_MCR 0x10 /* Modem Control Register */ +#define OFFSET_LSR 0x14 /* Line Status Register */ +#define OFFSET_MSR 0x18 /* Modem Status Register */ +#define OFFSET_SCR 0x1C /* SCR Scratch Register */ +#define OFFSET_GCTL 0x24 /* Global Control Register */ + +#define UART_GET_CHAR(uart) bfin_read16(((uart)->port.membase + OFFSET_RBR)) +#define UART_GET_DLL(uart) bfin_read16(((uart)->port.membase + OFFSET_DLL)) +#define UART_GET_IER(uart) bfin_read16(((uart)->port.membase + OFFSET_IER)) +#define UART_GET_DLH(uart) bfin_read16(((uart)->port.membase + OFFSET_DLH)) +#define UART_GET_IIR(uart) bfin_read16(((uart)->port.membase + OFFSET_IIR)) +#define UART_GET_LCR(uart) bfin_read16(((uart)->port.membase + OFFSET_LCR)) +#define UART_GET_LSR(uart) bfin_read16(((uart)->port.membase + OFFSET_LSR)) +#define UART_GET_GCTL(uart) bfin_read16(((uart)->port.membase + OFFSET_GCTL)) + +#define UART_PUT_CHAR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_THR),v) +#define UART_PUT_DLL(uart,v) bfin_write16(((uart)->port.membase + OFFSET_DLL),v) +#define UART_PUT_IER(uart,v) bfin_write16(((uart)->port.membase + OFFSET_IER),v) +#define UART_PUT_DLH(uart,v) bfin_write16(((uart)->port.membase + OFFSET_DLH),v) +#define UART_PUT_LCR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_LCR),v) +#define UART_PUT_GCTL(uart,v) bfin_write16(((uart)->port.membase + OFFSET_GCTL),v) + +#if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS) +# define CONFIG_SERIAL_BFIN_CTSRTS + +# ifndef CONFIG_UART0_CTS_PIN +# define CONFIG_UART0_CTS_PIN -1 +# endif + +# ifndef CONFIG_UART0_RTS_PIN +# define CONFIG_UART0_RTS_PIN -1 +# endif + +# ifndef CONFIG_UART1_CTS_PIN +# define CONFIG_UART1_CTS_PIN -1 +# endif + +# ifndef CONFIG_UART1_RTS_PIN +# define CONFIG_UART1_RTS_PIN -1 +# endif +#endif +/* + * The pin configuration is different from schematic + */ +struct bfin_serial_port { + struct uart_port port; + unsigned int old_status; +#ifdef CONFIG_SERIAL_BFIN_DMA + int tx_done; + int tx_count; + struct circ_buf rx_dma_buf; + struct timer_list rx_dma_timer; + int rx_dma_nrows; + unsigned int tx_dma_channel; + unsigned int rx_dma_channel; + struct work_struct tx_dma_workqueue; +#else + struct work_struct cts_workqueue; +#endif +#ifdef CONFIG_SERIAL_BFIN_CTSRTS + int cts_pin; + int rts_pin; +#endif +}; + +struct bfin_serial_port bfin_serial_ports[NR_PORTS]; +struct bfin_serial_res { + unsigned long uart_base_addr; + int uart_irq; +#ifdef CONFIG_SERIAL_BFIN_DMA + unsigned int uart_tx_dma_channel; + unsigned int uart_rx_dma_channel; +#endif +#ifdef CONFIG_SERIAL_BFIN_CTSRTS + int uart_cts_pin; + int uart_rts_pin; +#endif +}; + +struct bfin_serial_res bfin_serial_resource[] = { +#ifdef CONFIG_SERIAL_BFIN_UART0 + { + 0xFFC00400, + IRQ_UART0_RX, +#ifdef CONFIG_SERIAL_BFIN_DMA + CH_UART0_TX, + CH_UART0_RX, +#endif +#ifdef CONFIG_BFIN_UART0_CTSRTS + CONFIG_UART0_CTS_PIN, + CONFIG_UART0_RTS_PIN, +#endif + }, +#endif +#ifdef CONFIG_SERIAL_BFIN_UART1 + { + 0xFFC02000, + IRQ_UART1_RX, +#ifdef CONFIG_SERIAL_BFIN_DMA + CH_UART1_TX, + CH_UART1_RX, +#endif +#ifdef CONFIG_BFIN_UART1_CTSRTS + CONFIG_UART1_CTS_PIN, + CONFIG_UART1_RTS_PIN, +#endif + }, +#endif +}; + +int nr_ports = ARRAY_SIZE(bfin_serial_resource); + +static void bfin_serial_hw_init(struct bfin_serial_port *uart) +{ + unsigned short val; + val = bfin_read16(BFIN_PORT_MUX); + val &= ~(PFDE | PFTE); + bfin_write16(BFIN_PORT_MUX, val); + + val = bfin_read16(PORTF_FER); + val |= 0xF; + bfin_write16(PORTF_FER, val); + +#ifdef CONFIG_SERIAL_BFIN_CTSRTS + if (uart->cts_pin >= 0) { + gpio_request(uart->cts_pin, NULL); + gpio_direction_input(uart->cts_pin); + } + + if (uart->rts_pin >= 0) { + gpio_request(uart->rts_pin, NULL); + gpio_direction_output(uart->rts_pin); + } +#endif +} diff --git a/include/asm-blackfin/mach-bf548/blackfin.h b/include/asm-blackfin/mach-bf548/blackfin.h new file mode 100644 index 000000000000..094c41a63194 --- /dev/null +++ b/include/asm-blackfin/mach-bf548/blackfin.h @@ -0,0 +1,166 @@ +/* + * File: include/asm-blackfin/mach-bf548/blackfin.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _MACH_BLACKFIN_H_ +#define _MACH_BLACKFIN_H_ + +#define BF548_FAMILY + +#ifdef CONFIG_BF542 +#include "bf542.h" + +#ifdef CONFIG_BF544 +#include "bf544.h" +#endif + +#ifdef CONFIG_BF548 +#include "bf548.h" +#endif + +#ifdef CONFIG_BF549 +#include "bf549.h" +#endif + +#include "mem_map.h" +#include "anomaly.h" + +#if !(defined(__ASSEMBLY__) || defined(ASSEMBLY)) +#ifdef CONFIG_BF542 +#include "cdefBF542.h" +#endif + +#ifdef CONFIG_BF544 +#include "cdefBF544.h" +#endif +#ifdef CONFIG_BF548 +#include "cdefBF548.h" +#endif +#ifdef CONFIG_BF549 +#include "cdefBF549.h" +#endif + +/* UART 1*/ +#define bfin_read_UART_THR() bfin_read_UART1_THR() +#define bfin_write_UART_THR(val) bfin_write_UART1_THR(val) +#define bfin_read_UART_RBR() bfin_read_UART1_RBR() +#define bfin_write_UART_RBR(val) bfin_write_UART1_RBR(val) +#define bfin_read_UART_DLL() bfin_read_UART1_DLL() +#define bfin_write_UART_DLL(val) bfin_write_UART1_DLL(val) +#define bfin_read_UART_IER() bfin_read_UART1_IER() +#define bfin_write_UART_IER(val) bfin_write_UART1_IER(val) +#define bfin_read_UART_DLH() bfin_read_UART1_DLH() +#define bfin_write_UART_DLH(val) bfin_write_UART1_DLH(val) +#define bfin_read_UART_IIR() bfin_read_UART1_IIR() +#define bfin_write_UART_IIR(val) bfin_write_UART1_IIR(val) +#define bfin_read_UART_LCR() bfin_read_UART1_LCR() +#define bfin_write_UART_LCR(val) bfin_write_UART1_LCR(val) +#define bfin_read_UART_MCR() bfin_read_UART1_MCR() +#define bfin_write_UART_MCR(val) bfin_write_UART1_MCR(val) +#define bfin_read_UART_LSR() bfin_read_UART1_LSR() +#define bfin_write_UART_LSR(val) bfin_write_UART1_LSR(val) +#define bfin_read_UART_SCR() bfin_read_UART1_SCR() +#define bfin_write_UART_SCR(val) bfin_write_UART1_SCR(val) +#define bfin_read_UART_GCTL() bfin_read_UART1_GCTL() +#define bfin_write_UART_GCTL(val) bfin_write_UART1_GCTL(val) + +#endif + +/* MAP used DEFINES from BF533 to BF54x - so we don't need to change + * them in the driver, kernel, etc. */ + +/* UART_IIR Register */ +#define STATUS(x) ((x << 1) & 0x06) +#define STATUS_P1 0x02 +#define STATUS_P0 0x01 + +/* UART 0*/ + +/* DMA Channnel */ +#define bfin_read_CH_UART_RX() bfin_read_CH_UART1_RX() +#define bfin_write_CH_UART_RX(val) bfin_write_CH_UART1_RX(val) +#define bfin_read_CH_UART_TX() bfin_read_CH_UART1_TX() +#define bfin_write_CH_UART_TX(val) bfin_write_CH_UART1_TX(val) +#define CH_UART_RX CH_UART1_RX +#define CH_UART_TX CH_UART1_TX + +/* System Interrupt Controller */ +#define bfin_read_IRQ_UART_RX() bfin_read_IRQ_UART1_RX() +#define bfin_write_IRQ_UART_RX(val) bfin_write_IRQ_UART1_RX(val) +#define bfin_read_IRQ_UART_TX() bfin_read_IRQ_UART1_TX() +#define bfin_write_IRQ_UART_TX(val) bfin_write_IRQ_UART1_TX(val) +#define bfin_read_IRQ_UART_ERROR() bfin_read_IRQ_UART1_ERROR() +#define bfin_write_IRQ_UART_ERROR(val) bfin_write_IRQ_UART1_ERROR(val) +#define IRQ_UART_RX IRQ_UART1_RX +#define IRQ_UART_TX IRQ_UART1_TX +#define IRQ_UART_ERROR IRQ_UART1_ERROR + +/* MMR Registers*/ +#define bfin_read_UART_THR() bfin_read_UART1_THR() +#define bfin_write_UART_THR(val) bfin_write_UART1_THR(val) +#define bfin_read_UART_RBR() bfin_read_UART1_RBR() +#define bfin_write_UART_RBR(val) bfin_write_UART1_RBR(val) +#define bfin_read_UART_DLL() bfin_read_UART1_DLL() +#define bfin_write_UART_DLL(val) bfin_write_UART1_DLL(val) +#define bfin_read_UART_IER() bfin_read_UART1_IER() +#define bfin_write_UART_IER(val) bfin_write_UART1_IER(val) +#define bfin_read_UART_DLH() bfin_read_UART1_DLH() +#define bfin_write_UART_DLH(val) bfin_write_UART1_DLH(val) +#define bfin_read_UART_IIR() bfin_read_UART1_IIR() +#define bfin_write_UART_IIR(val) bfin_write_UART1_IIR(val) +#define bfin_read_UART_LCR() bfin_read_UART1_LCR() +#define bfin_write_UART_LCR(val) bfin_write_UART1_LCR(val) +#define bfin_read_UART_MCR() bfin_read_UART1_MCR() +#define bfin_write_UART_MCR(val) bfin_write_UART1_MCR(val) +#define bfin_read_UART_LSR() bfin_read_UART1_LSR() +#define bfin_write_UART_LSR(val) bfin_write_UART1_LSR(val) +#define bfin_read_UART_SCR() bfin_read_UART1_SCR() +#define bfin_write_UART_SCR(val) bfin_write_UART1_SCR(val) +#define bfin_read_UART_GCTL() bfin_read_UART1_GCTL() +#define bfin_write_UART_GCTL(val) bfin_write_UART1_GCTL(val) +#define UART_THR UART1_THR +#define UART_RBR UART1_RBR +#define UART_DLL UART1_DLL +#define UART_IER UART1_IER +#define UART_DLH UART1_DLH +#define UART_IIR UART1_IIR +#define UART_LCR UART1_LCR +#define UART_MCR UART1_MCR +#define UART_LSR UART1_LSR +#define UART_SCR UART1_SCR +#define UART_GCTL UART1_GCTL + +/* PLL_DIV Masks */ +#define CCLK_DIV1 CSEL_DIV1 /* CCLK = VCO / 1 */ +#define CCLK_DIV2 CSEL_DIV2 /* CCLK = VCO / 2 */ +#define CCLK_DIV4 CSEL_DIV4 /* CCLK = VCO / 4 */ +#define CCLK_DIV8 CSEL_DIV8 /* CCLK = VCO / 8 */ + +#endif diff --git a/include/asm-blackfin/mach-bf548/dma.h b/include/asm-blackfin/mach-bf548/dma.h new file mode 100644 index 000000000000..5a334c813c79 --- /dev/null +++ b/include/asm-blackfin/mach-bf548/dma.h @@ -0,0 +1,63 @@ +/* + * file: include/asm-blackfin/mach-bf548/dma.h + * based on: + * author: + * + * created: + * description: + * system mmr register map + * rev: + * + * modified: + * + * + * bugs: enter bugs at http://blackfin.uclinux.org/ + * + * this program is free software; you can redistribute it and/or modify + * it under the terms of the gnu general public license as published by + * the free software foundation; either version 2, or (at your option) + * any later version. + * + * this program is distributed in the hope that it will be useful, + * but without any warranty; without even the implied warranty of + * merchantability or fitness for a particular purpose. see the + * gnu general public license for more details. + * + * you should have received a copy of the gnu general public license + * along with this program; see the file copying. + * if not, write to the free software foundation, + * 59 temple place - suite 330, boston, ma 02111-1307, usa. + */ + +#ifndef _MACH_DMA_H_ +#define _MACH_DMA_H_ + +#define CH_SPORT0_RX 0 +#define CH_SPORT0_TX 1 +#define CH_SPORT1_RX 2 +#define CH_SPORT1_TX 3 +#define CH_SPI0 4 +#define CH_SPI1 5 +#define CH_UART0_RX 6 +#define CH_UART0_TX 7 +#define CH_UART1_RX 8 +#define CH_UART1_TX 9 +#define CH_ATAPI_RX 10 +#define CH_ATAPI_TX 11 + +#define CH_EPPI0 12 +#define CH_EPPI1 13 +#define CH_EPPI2 14 +#define CH_PIXC_IMAGE 15 +#define CH_PIXC_OVERLAY 16 +#define CH_PIXC_OUTPUT 17 +#define CH_SPORT2_RX 18 +#define CH_SPORT2_TX 19 +#define CH_SPORT3_RX 20 +#define CH_SPORT3_TX 21 +#define CH_SDH 22 +#define CH_SPI2 23 + +#define MAX_BLACKFIN_DMA_CHANNEL CH_SPI2 + +#endif diff --git a/include/asm-blackfin/mach-bf548/irq.h b/include/asm-blackfin/mach-bf548/irq.h new file mode 100644 index 000000000000..a7f6703ea1dd --- /dev/null +++ b/include/asm-blackfin/mach-bf548/irq.h @@ -0,0 +1,306 @@ +/* + * file: include/asm-blackfin/mach-bf548/irq.h + * based on: include/asm-blackfin/mach-bf537/irq.h + * author: Roy Huang (roy.huang@analog.com) + * + * created: + * description: + * system mmr register map + * rev: + * + * modified: + * + * + * bugs: enter bugs at http://blackfin.uclinux.org/ + * + * this program is free software; you can redistribute it and/or modify + * it under the terms of the gnu general public license as published by + * the free software foundation; either version 2, or (at your option) + * any later version. + * + * this program is distributed in the hope that it will be useful, + * but without any warranty; without even the implied warranty of + * merchantability or fitness for a particular purpose. see the + * gnu general public license for more details. + * + * you should have received a copy of the gnu general public license + * along with this program; see the file copying. + * if not, write to the free software foundation, + * 59 temple place - suite 330, boston, ma 02111-1307, usa. + */ + +#ifndef _BF548_IRQ_H_ +#define _BF548_IRQ_H_ + +/* + * Interrupt source definitions + Event Source Core Event Name +Core Emulation ** +Events (highest priority) EMU 0 + Reset RST 1 + NMI NMI 2 + Exception EVX 3 + Reserved -- 4 + Hardware Error IVHW 5 + Core Timer IVTMR 6 * + +..... + + Software Interrupt 1 IVG14 31 + Software Interrupt 2 -- + (lowest priority) IVG15 32 * + */ + +#define NR_PERI_INTS 32 + +/* The ABSTRACT IRQ definitions */ +/** the first seven of the following are fixed, the rest you change if you need to **/ +#define IRQ_EMU 0 /* Emulation */ +#define IRQ_RST 1 /* reset */ +#define IRQ_NMI 2 /* Non Maskable */ +#define IRQ_EVX 3 /* Exception */ +#define IRQ_UNUSED 4 /* - unused interrupt*/ +#define IRQ_HWERR 5 /* Hardware Error */ +#define IRQ_CORETMR 6 /* Core timer */ + +#define BFIN_IRQ(x) ((x) + 7) + +#define IRQ_PLL_WAKEUP BFIN_IRQ(0) /* PLL Wakeup Interrupt */ +#define IRQ_DMAC0_ERR BFIN_IRQ(1) /* DMAC0 Status Interrupt */ +#define IRQ_EPPI0_ERR BFIN_IRQ(2) /* EPPI0 Error Interrupt */ +#define IRQ_SPORT0_ERR BFIN_IRQ(3) /* SPORT0 Error Interrupt */ +#define IRQ_SPORT1_ERR BFIN_IRQ(4) /* SPORT1 Error Interrupt */ +#define IRQ_SPI0_ERR BFIN_IRQ(5) /* SPI0 Status(Error) Interrupt */ +#define IRQ_UART0_ERR BFIN_IRQ(6) /* UART0 Status(Error) Interrupt */ +#define IRQ_RTC BFIN_IRQ(7) /* RTC Interrupt */ +#define IRQ_EPPI0 BFIN_IRQ(8) /* EPPI0 Interrupt (DMA12) */ +#define IRQ_SPORT0_RX BFIN_IRQ(9) /* SPORT0 RX Interrupt (DMA0) */ +#define IRQ_SPORT0_TX BFIN_IRQ(10) /* SPORT0 TX Interrupt (DMA1) */ +#define IRQ_SPORT1_RX BFIN_IRQ(11) /* SPORT1 RX Interrupt (DMA2) */ +#define IRQ_SPORT1_TX BFIN_IRQ(12) /* SPORT1 TX Interrupt (DMA3) */ +#define IRQ_SPI0 BFIN_IRQ(13) /* SPI0 Interrupt (DMA4) */ +#define IRQ_UART0_RX BFIN_IRQ(14) /* UART0 RX Interrupt (DMA6) */ +#define IRQ_UART0_TX BFIN_IRQ(15) /* UART0 TX Interrupt (DMA7) */ +#define IRQ_TIMER8 BFIN_IRQ(16) /* TIMER 8 Interrupt */ +#define IRQ_TIMER9 BFIN_IRQ(17) /* TIMER 9 Interrupt */ +#define IRQ_TIMER10 BFIN_IRQ(18) /* TIMER 10 Interrupt */ +#define IRQ_PINT0 BFIN_IRQ(19) /* PINT0 Interrupt */ +#define IRQ_PINT1 BFIN_IRQ(20) /* PINT1 Interrupt */ +#define IRQ_MDMAS0 BFIN_IRQ(21) /* MDMA Stream 0 Interrupt */ +#define IRQ_MDMAS1 BFIN_IRQ(22) /* MDMA Stream 1 Interrupt */ +#define IRQ_WATCHDOG BFIN_IRQ(23) /* Watchdog Interrupt */ +#define IRQ_DMAC1_ERR BFIN_IRQ(24) /* DMAC1 Status (Error) Interrupt */ +#define IRQ_SPORT2_ERR BFIN_IRQ(25) /* SPORT2 Error Interrupt */ +#define IRQ_SPORT3_ERR BFIN_IRQ(26) /* SPORT3 Error Interrupt */ +#define IRQ_MXVR BFIN_IRQ(27) /* SPORT3 Error Interrupt */ +#define IRQ_SPI1_ERR BFIN_IRQ(28) /* SPI1 Status (Error) Interrupt */ +#define IRQ_SPI2_ERR BFIN_IRQ(29) /* SPI2 Status (Error) Interrupt */ +#define IRQ_UART1_ERR BFIN_IRQ(30) /* UART1 Status (Error) Interrupt */ +#define IRQ_UART2_ERR BFIN_IRQ(31) /* UART2 Status (Error) Interrupt */ +#define IRQ_CAN0_ERR BFIN_IRQ(32) /* CAN0 Status (Error) Interrupt */ +#define IRQ_SPORT2_RX BFIN_IRQ(33) /* SPORT2 RX (DMA18) Interrupt */ +#define IRQ_SPORT2_TX BFIN_IRQ(34) /* SPORT2 TX (DMA19) Interrupt */ +#define IRQ_SPORT3_RX BFIN_IRQ(35) /* SPORT3 RX (DMA20) Interrupt */ +#define IRQ_SPORT3_TX BFIN_IRQ(36) /* SPORT3 TX (DMA21) Interrupt */ +#define IRQ_EPP1 BFIN_IRQ(37) /* EPP1 (DMA13) Interrupt */ +#define IRQ_EPP2 BFIN_IRQ(38) /* EPP2 (DMA14) Interrupt */ +#define IRQ_SPI1 BFIN_IRQ(39) /* SPI1 (DMA5) Interrupt */ +#define IRQ_SPI2 BFIN_IRQ(40) /* SPI2 (DMA23) Interrupt */ +#define IRQ_UART1_RX BFIN_IRQ(41) /* UART1 RX (DMA8) Interrupt */ +#define IRQ_UART1_TX BFIN_IRQ(42) /* UART1 TX (DMA9) Interrupt */ +#define IRQ_ATAPI_RX BFIN_IRQ(43) /* ATAPI RX (DMA10) Interrupt */ +#define IRQ_ATAPI_TX BFIN_IRQ(44) /* ATAPI TX (DMA11) Interrupt */ +#define IRQ_TWI0 BFIN_IRQ(45) /* TWI0 Interrupt */ +#define IRQ_TWI1 BFIN_IRQ(46) /* TWI1 Interrupt */ +#define IRQ_CAN0_RX BFIN_IRQ(47) /* CAN0 Receive Interrupt */ +#define IRQ_CAN0_TX BFIN_IRQ(48) /* CAN0 Transmit Interrupt */ +#define IRQ_MDMAS2 BFIN_IRQ(49) /* MDMA Stream 2 Interrupt */ +#define IRQ_MDMAS3 BFIN_IRQ(50) /* MDMA Stream 3 Interrupt */ +#define IRQ_MXVR_ERR BFIN_IRQ(51) /* MXVR Status (Error) Interrupt */ +#define IRQ_MXVR_MSG BFIN_IRQ(52) /* MXVR Message Interrupt */ +#define IRQ_MXVR_PKT BFIN_IRQ(53) /* MXVR Packet Interrupt */ +#define IRQ_EPP1_ERR BFIN_IRQ(54) /* EPPI1 Error Interrupt */ +#define IRQ_EPP2_ERR BFIN_IRQ(55) /* EPPI2 Error Interrupt */ +#define IRQ_UART3_ERR BFIN_IRQ(56) /* UART3 Status (Error) Interrupt */ +#define IRQ_HOST_ERR BFIN_IRQ(57) /* HOST Status (Error) Interrupt */ +#define IRQ_PIXC_ERR BFIN_IRQ(59) /* PIXC Status (Error) Interrupt */ +#define IRQ_NFC_ERR BFIN_IRQ(60) /* NFC Error Interrupt */ +#define IRQ_ATAPI_ERR BFIN_IRQ(61) /* ATAPI Error Interrupt */ +#define IRQ_CAN1_ERR BFIN_IRQ(62) /* CAN1 Status (Error) Interrupt */ +#define IRQ_HS_DMA_ERR BFIN_IRQ(63) /* Handshake DMA Status Interrupt */ +#define IRQ_PIXC_IN0 BFIN_IRQ(64) /* PIXC IN0 (DMA15) Interrupt */ +#define IRQ_PIXC_IN1 BFIN_IRQ(65) /* PIXC IN1 (DMA16) Interrupt */ +#define IRQ_PIXC_OUT BFIN_IRQ(66) /* PIXC OUT (DMA17) Interrupt */ +#define IRQ_SDH BFIN_IRQ(67) /* SDH/NFC (DMA22) Interrupt */ +#define IRQ_CNT BFIN_IRQ(68) /* CNT Interrupt */ +#define IRQ_KEY BFIN_IRQ(69) /* KEY Interrupt */ +#define IRQ_CAN1_RX BFIN_IRQ(70) /* CAN1 RX Interrupt */ +#define IRQ_CAN1_TX BFIN_IRQ(71) /* CAN1 TX Interrupt */ +#define IRQ_SDH_MASK0 BFIN_IRQ(72) /* SDH Mask 0 Interrupt */ +#define IRQ_SDH_MASK1 BFIN_IRQ(73) /* SDH Mask 1 Interrupt */ +#define IRQ_USB_INT0 BFIN_IRQ(75) /* USB INT0 Interrupt */ +#define IRQ_USB_INT1 BFIN_IRQ(76) /* USB INT1 Interrupt */ +#define IRQ_USB_INT2 BFIN_IRQ(77) /* USB INT2 Interrupt */ +#define IRQ_USB_DMA BFIN_IRQ(78) /* USB DMA Interrupt */ +#define IRQ_OPTSEC BFIN_IRQ(79) /* OTPSEC Interrupt */ +#define IRQ_TMR0 BFIN_IRQ(86) /* Timer 0 Interrupt */ +#define IRQ_TMR1 BFIN_IRQ(87) /* Timer 1 Interrupt */ +#define IRQ_TMR2 BFIN_IRQ(88) /* Timer 2 Interrupt */ +#define IRQ_TMR3 BFIN_IRQ(89) /* Timer 3 Interrupt */ +#define IRQ_TMR4 BFIN_IRQ(90) /* Timer 4 Interrupt */ +#define IRQ_TMR5 BFIN_IRQ(91) /* Timer 5 Interrupt */ +#define IRQ_TMR6 BFIN_IRQ(92) /* Timer 6 Interrupt */ +#define IRQ_TMR7 BFIN_IRQ(93) /* Timer 7 Interrupt */ +#define IRQ_PINT2 BFIN_IRQ(94) /* PINT2 Interrupt */ +#define IRQ_PINT3 BFIN_IRQ(95) /* PINT3 Interrupt */ + +#define SYS_IRQS IRQ_PINT3 + +#define BFIN_PA_IRQ(x) ((x) + SYS_IRQS + 1) +#define IRQ_PA0 BFIN_PA_IRQ(0) +#define IRQ_PA1 BFIN_PA_IRQ(1) +#define IRQ_PA2 BFIN_PA_IRQ(2) +#define IRQ_PA3 BFIN_PA_IRQ(3) +#define IRQ_PA4 BFIN_PA_IRQ(4) +#define IRQ_PA5 BFIN_PA_IRQ(5) +#define IRQ_PA6 BFIN_PA_IRQ(6) +#define IRQ_PA7 BFIN_PA_IRQ(7) +#define IRQ_PA8 BFIN_PA_IRQ(8) +#define IRQ_PA9 BFIN_PA_IRQ(9) +#define IRQ_PA10 BFIN_PA_IRQ(10) +#define IRQ_PA11 BFIN_PA_IRQ(11) +#define IRQ_PA12 BFIN_PA_IRQ(12) +#define IRQ_PA13 BFIN_PA_IRQ(13) +#define IRQ_PA14 BFIN_PA_IRQ(14) +#define IRQ_PA15 BFIN_PA_IRQ(15) + +#define BFIN_PB_IRQ(x) ((x) + IRQ_PA15 + 1) +#define IRQ_PB0 BFIN_PB_IRQ(0) +#define IRQ_PB1 BFIN_PB_IRQ(1) +#define IRQ_PB2 BFIN_PB_IRQ(2) +#define IRQ_PB3 BFIN_PB_IRQ(3) +#define IRQ_PB4 BFIN_PB_IRQ(4) +#define IRQ_PB5 BFIN_PB_IRQ(5) +#define IRQ_PB6 BFIN_PB_IRQ(6) +#define IRQ_PB7 BFIN_PB_IRQ(7) +#define IRQ_PB8 BFIN_PB_IRQ(8) +#define IRQ_PB9 BFIN_PB_IRQ(9) +#define IRQ_PB10 BFIN_PB_IRQ(10) +#define IRQ_PB11 BFIN_PB_IRQ(11) +#define IRQ_PB12 BFIN_PB_IRQ(12) +#define IRQ_PB13 BFIN_PB_IRQ(13) +#define IRQ_PB14 BFIN_PB_IRQ(14) +#define IRQ_PB15 BFIN_PB_IRQ(15) + +#define BFIN_PC_IRQ(x) ((x) + IRQ_PB15 + 1) +#define IRQ_PC0 BFIN_PC_IRQ(0) +#define IRQ_PC1 BFIN_PC_IRQ(1) +#define IRQ_PC2 BFIN_PC_IRQ(2) +#define IRQ_PC3 BFIN_PC_IRQ(3) +#define IRQ_PC4 BFIN_PC_IRQ(4) +#define IRQ_PC5 BFIN_PC_IRQ(5) +#define IRQ_PC6 BFIN_PC_IRQ(6) +#define IRQ_PC7 BFIN_PC_IRQ(7) +#define IRQ_PC8 BFIN_PC_IRQ(8) +#define IRQ_PC9 BFIN_PC_IRQ(9) +#define IRQ_PC10 BFIN_PC_IRQ(10) +#define IRQ_PC11 BFIN_PC_IRQ(11) +#define IRQ_PC12 BFIN_PC_IRQ(12) +#define IRQ_PC13 BFIN_PC_IRQ(13) +#define IRQ_PC14 BFIN_PC_IRQ(14) +#define IRQ_PC15 BFIN_PC_IRQ(15) + +#define BFIN_PD_IRQ(x) ((x) + IRQ_PC15 + 1) +#define IRQ_PD0 BFIN_PD_IRQ(0) +#define IRQ_PD1 BFIN_PD_IRQ(1) +#define IRQ_PD2 BFIN_PD_IRQ(2) +#define IRQ_PD3 BFIN_PD_IRQ(3) +#define IRQ_PD4 BFIN_PD_IRQ(4) +#define IRQ_PD5 BFIN_PD_IRQ(5) +#define IRQ_PD6 BFIN_PD_IRQ(6) +#define IRQ_PD7 BFIN_PD_IRQ(7) +#define IRQ_PD8 BFIN_PD_IRQ(8) +#define IRQ_PD9 BFIN_PD_IRQ(9) +#define IRQ_PD10 BFIN_PD_IRQ(10) +#define IRQ_PD11 BFIN_PD_IRQ(11) +#define IRQ_PD12 BFIN_PD_IRQ(12) +#define IRQ_PD13 BFIN_PD_IRQ(13) +#define IRQ_PD14 BFIN_PD_IRQ(14) +#define IRQ_PD15 BFIN_PD_IRQ(15) + +#define BFIN_PE_IRQ(x) ((x) + IRQ_PD15 + 1) +#define IRQ_PE0 BFIN_PE_IRQ(0) +#define IRQ_PE1 BFIN_PE_IRQ(1) +#define IRQ_PE2 BFIN_PE_IRQ(2) +#define IRQ_PE3 BFIN_PE_IRQ(3) +#define IRQ_PE4 BFIN_PE_IRQ(4) +#define IRQ_PE5 BFIN_PE_IRQ(5) +#define IRQ_PE6 BFIN_PE_IRQ(6) +#define IRQ_PE7 BFIN_PE_IRQ(7) +#define IRQ_PE8 BFIN_PE_IRQ(8) +#define IRQ_PE9 BFIN_PE_IRQ(9) +#define IRQ_PE10 BFIN_PE_IRQ(10) +#define IRQ_PE11 BFIN_PE_IRQ(11) +#define IRQ_PE12 BFIN_PE_IRQ(12) +#define IRQ_PE13 BFIN_PE_IRQ(13) +#define IRQ_PE14 BFIN_PE_IRQ(14) +#define IRQ_PE15 BFIN_PE_IRQ(15) + + +#ifdef CONFIG_IRQCHIP_DEMUX_GPIO +#define NR_IRQS (IRQ_PH15+1) +#else +#define NR_IRQS (IRQ_UART1_ERROR+1) +#endif + +#define IVG7 7 +#define IVG8 8 +#define IVG9 9 +#define IVG10 10 +#define IVG11 11 +#define IVG12 12 +#define IVG13 13 +#define IVG14 14 +#define IVG15 15 + +/* IAR0 BIT FIELDS*/ +#define IRQ_PLL_WAKEUP_POS 0 +#define IRQ_DMA_ERROR_POS 4 +#define IRQ_ERROR_POS 8 +#define IRQ_RTC_POS 12 +#define IRQ_PPI_POS 16 +#define IRQ_SPORT0_RX_POS 20 +#define IRQ_SPORT0_TX_POS 24 +#define IRQ_SPORT1_RX_POS 28 + +/* IAR1 BIT FIELDS*/ +#define IRQ_SPORT1_TX_POS 0 +#define IRQ_TWI_POS 4 +#define IRQ_SPI_POS 8 +#define IRQ_UART0_RX_POS 12 +#define IRQ_UART0_TX_POS 16 +#define IRQ_UART1_RX_POS 20 +#define IRQ_UART1_TX_POS 24 +#define IRQ_CAN_RX_POS 28 + +/* IAR2 BIT FIELDS*/ +#define IRQ_CAN_TX_POS 0 +#define IRQ_MAC_RX_POS 4 +#define IRQ_MAC_TX_POS 8 +#define IRQ_TMR0_POS 12 +#define IRQ_TMR1_POS 16 +#define IRQ_TMR2_POS 20 +#define IRQ_TMR3_POS 24 +#define IRQ_TMR4_POS 28 + +/* IAR3 BIT FIELDS*/ +#define IRQ_TMR5_POS 0 +#define IRQ_TMR6_POS 4 +#define IRQ_TMR7_POS 8 +#define IRQ_PROG_INTA_POS 12 +#define IRQ_PORTG_INTB_POS 16 +#define IRQ_MEM_DMA0_POS 20 +#define IRQ_MEM_DMA1_POS 24 +#define IRQ_WATCH_POS 28 + +#endif /* _BF537_IRQ_H_ */ diff --git a/include/asm-blackfin/mach-bf548/mem_init.h b/include/asm-blackfin/mach-bf548/mem_init.h new file mode 100644 index 000000000000..0cb279e973d7 --- /dev/null +++ b/include/asm-blackfin/mach-bf548/mem_init.h @@ -0,0 +1,189 @@ +/* + * File: include/asm-blackfin/mach-bf548/mem_init.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#if (CONFIG_MEM_MT46V32M16) + +#if defined CONFIG_CLKIN_HALF +#define CLKIN_HALF 1 +#else +#define CLKIN_HALF 0 +#endif + +#if defined CONFIG_PLL_BYPASS +#define PLL_BYPASS 1 +#else +#define PLL_BYPASS 0 +#endif + +/***************************************Currently Not Being Used *********************************/ +#define flash_EBIU_AMBCTL_WAT ((CONFIG_FLASH_SPEED_BWAT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1 +#define flash_EBIU_AMBCTL_RAT ((CONFIG_FLASH_SPEED_BRAT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1 +#define flash_EBIU_AMBCTL_HT ((CONFIG_FLASH_SPEED_BHT * 4) / (4000000000 / CONFIG_SCLK_HZ)) +#define flash_EBIU_AMBCTL_ST ((CONFIG_FLASH_SPEED_BST * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1 +#define flash_EBIU_AMBCTL_TT ((CONFIG_FLASH_SPEED_BTT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1 + +#if (flash_EBIU_AMBCTL_TT > 3) +#define flash_EBIU_AMBCTL0_TT B0TT_4 +#endif +#if (flash_EBIU_AMBCTL_TT == 3) +#define flash_EBIU_AMBCTL0_TT B0TT_3 +#endif +#if (flash_EBIU_AMBCTL_TT == 2) +#define flash_EBIU_AMBCTL0_TT B0TT_2 +#endif +#if (flash_EBIU_AMBCTL_TT < 2) +#define flash_EBIU_AMBCTL0_TT B0TT_1 +#endif + +#if (flash_EBIU_AMBCTL_ST > 3) +#define flash_EBIU_AMBCTL0_ST B0ST_4 +#endif +#if (flash_EBIU_AMBCTL_ST == 3) +#define flash_EBIU_AMBCTL0_ST B0ST_3 +#endif +#if (flash_EBIU_AMBCTL_ST == 2) +#define flash_EBIU_AMBCTL0_ST B0ST_2 +#endif +#if (flash_EBIU_AMBCTL_ST < 2) +#define flash_EBIU_AMBCTL0_ST B0ST_1 +#endif + +#if (flash_EBIU_AMBCTL_HT > 2) +#define flash_EBIU_AMBCTL0_HT B0HT_3 +#endif +#if (flash_EBIU_AMBCTL_HT == 2) +#define flash_EBIU_AMBCTL0_HT B0HT_2 +#endif +#if (flash_EBIU_AMBCTL_HT == 1) +#define flash_EBIU_AMBCTL0_HT B0HT_1 +#endif +#if (flash_EBIU_AMBCTL_HT == 0 && CONFIG_FLASH_SPEED_BHT == 0) +#define flash_EBIU_AMBCTL0_HT B0HT_0 +#endif +#if (flash_EBIU_AMBCTL_HT == 0 && CONFIG_FLASH_SPEED_BHT != 0) +#define flash_EBIU_AMBCTL0_HT B0HT_1 +#endif + +#if (flash_EBIU_AMBCTL_WAT > 14) +#define flash_EBIU_AMBCTL0_WAT B0WAT_15 +#endif +#if (flash_EBIU_AMBCTL_WAT == 14) +#define flash_EBIU_AMBCTL0_WAT B0WAT_14 +#endif +#if (flash_EBIU_AMBCTL_WAT == 13) +#define flash_EBIU_AMBCTL0_WAT B0WAT_13 +#endif +#if (flash_EBIU_AMBCTL_WAT == 12) +#define flash_EBIU_AMBCTL0_WAT B0WAT_12 +#endif +#if (flash_EBIU_AMBCTL_WAT == 11) +#define flash_EBIU_AMBCTL0_WAT B0WAT_11 +#endif +#if (flash_EBIU_AMBCTL_WAT == 10) +#define flash_EBIU_AMBCTL0_WAT B0WAT_10 +#endif +#if (flash_EBIU_AMBCTL_WAT == 9) +#define flash_EBIU_AMBCTL0_WAT B0WAT_9 +#endif +#if (flash_EBIU_AMBCTL_WAT == 8) +#define flash_EBIU_AMBCTL0_WAT B0WAT_8 +#endif +#if (flash_EBIU_AMBCTL_WAT == 7) +#define flash_EBIU_AMBCTL0_WAT B0WAT_7 +#endif +#if (flash_EBIU_AMBCTL_WAT == 6) +#define flash_EBIU_AMBCTL0_WAT B0WAT_6 +#endif +#if (flash_EBIU_AMBCTL_WAT == 5) +#define flash_EBIU_AMBCTL0_WAT B0WAT_5 +#endif +#if (flash_EBIU_AMBCTL_WAT == 4) +#define flash_EBIU_AMBCTL0_WAT B0WAT_4 +#endif +#if (flash_EBIU_AMBCTL_WAT == 3) +#define flash_EBIU_AMBCTL0_WAT B0WAT_3 +#endif +#if (flash_EBIU_AMBCTL_WAT == 2) +#define flash_EBIU_AMBCTL0_WAT B0WAT_2 +#endif +#if (flash_EBIU_AMBCTL_WAT == 1) +#define flash_EBIU_AMBCTL0_WAT B0WAT_1 +#endif + +#if (flash_EBIU_AMBCTL_RAT > 14) +#define flash_EBIU_AMBCTL0_RAT B0RAT_15 +#endif +#if (flash_EBIU_AMBCTL_RAT == 14) +#define flash_EBIU_AMBCTL0_RAT B0RAT_14 +#endif +#if (flash_EBIU_AMBCTL_RAT == 13) +#define flash_EBIU_AMBCTL0_RAT B0RAT_13 +#endif +#if (flash_EBIU_AMBCTL_RAT == 12) +#define flash_EBIU_AMBCTL0_RAT B0RAT_12 +#endif +#if (flash_EBIU_AMBCTL_RAT == 11) +#define flash_EBIU_AMBCTL0_RAT B0RAT_11 +#endif +#if (flash_EBIU_AMBCTL_RAT == 10) +#define flash_EBIU_AMBCTL0_RAT B0RAT_10 +#endif +#if (flash_EBIU_AMBCTL_RAT == 9) +#define flash_EBIU_AMBCTL0_RAT B0RAT_9 +#endif +#if (flash_EBIU_AMBCTL_RAT == 8) +#define flash_EBIU_AMBCTL0_RAT B0RAT_8 +#endif +#if (flash_EBIU_AMBCTL_RAT == 7) +#define flash_EBIU_AMBCTL0_RAT B0RAT_7 +#endif +#if (flash_EBIU_AMBCTL_RAT == 6) +#define flash_EBIU_AMBCTL0_RAT B0RAT_6 +#endif +#if (flash_EBIU_AMBCTL_RAT == 5) +#define flash_EBIU_AMBCTL0_RAT B0RAT_5 +#endif +#if (flash_EBIU_AMBCTL_RAT == 4) +#define flash_EBIU_AMBCTL0_RAT B0RAT_4 +#endif +#if (flash_EBIU_AMBCTL_RAT == 3) +#define flash_EBIU_AMBCTL0_RAT B0RAT_3 +#endif +#if (flash_EBIU_AMBCTL_RAT == 2) +#define flash_EBIU_AMBCTL0_RAT B0RAT_2 +#endif +#if (flash_EBIU_AMBCTL_RAT == 1) +#define flash_EBIU_AMBCTL0_RAT B0RAT_1 +#endif + +#define flash_EBIU_AMBCTL0 \ + (flash_EBIU_AMBCTL0_WAT | flash_EBIU_AMBCTL0_RAT | flash_EBIU_AMBCTL0_HT | \ + flash_EBIU_AMBCTL0_ST | flash_EBIU_AMBCTL0_TT | CONFIG_FLASH_SPEED_RDYEN) diff --git a/include/asm-blackfin/mach-bf548/mem_map.h b/include/asm-blackfin/mach-bf548/mem_map.h new file mode 100644 index 000000000000..72d80e8a6e81 --- /dev/null +++ b/include/asm-blackfin/mach-bf548/mem_map.h @@ -0,0 +1,97 @@ +/* + * file: include/asm-blackfin/mach-bf548/mem_map.h + * based on: + * author: + * + * created: + * description: + * Memory MAP Common header file for blackfin BF537/6/4 of processors. + * rev: + * + * modified: + * + * bugs: enter bugs at http://blackfin.uclinux.org/ + * + * this program is free software; you can redistribute it and/or modify + * it under the terms of the gnu general public license as published by + * the free software foundation; either version 2, or (at your option) + * any later version. + * + * this program is distributed in the hope that it will be useful, + * but without any warranty; without even the implied warranty of + * merchantability or fitness for a particular purpose. see the + * gnu general public license for more details. + * + * you should have received a copy of the gnu general public license + * along with this program; see the file copying. + * if not, write to the free software foundation, + * 59 temple place - suite 330, boston, ma 02111-1307, usa. + */ + +#ifndef _MEM_MAP_548_H_ +#define _MEM_MAP_548_H_ + +#define COREMMR_BASE 0xFFE00000 /* Core MMRs */ +#define SYSMMR_BASE 0xFFC00000 /* System MMRs */ + +/* Async Memory Banks */ +#define ASYNC_BANK3_BASE 0x2C000000 /* Async Bank 3 */ +#define ASYNC_BANK3_SIZE 0x04000000 /* 64M */ +#define ASYNC_BANK2_BASE 0x28000000 /* Async Bank 2 */ +#define ASYNC_BANK2_SIZE 0x04000000 /* 64M */ +#define ASYNC_BANK1_BASE 0x24000000 /* Async Bank 1 */ +#define ASYNC_BANK1_SIZE 0x04000000 /* 64M */ +#define ASYNC_BANK0_BASE 0x20000000 /* Async Bank 0 */ +#define ASYNC_BANK0_SIZE 0x04000000 /* 64M */ + +/* Boot ROM Memory */ + +#define BOOT_ROM_START 0xEF000000 + +/* Level 1 Memory */ + +/* Memory Map for ADSP-BF548 processors */ +#ifdef CONFIG_BLKFIN_ICACHE +#define BLKFIN_ICACHESIZE (16*1024) +#else +#define BLKFIN_ICACHESIZE (0*1024) +#endif + +#define L1_CODE_START 0xFFA00000 +#define L1_DATA_A_START 0xFF800000 +#define L1_DATA_B_START 0xFF900000 + +#define L1_CODE_LENGTH 0xC000 + +#ifdef CONFIG_BLKFIN_DCACHE + +#ifdef CONFIG_BLKFIN_DCACHE_BANKA +#define DMEM_CNTR (ACACHE_BSRAM | ENDCPLB | PORT_PREF0) +#define L1_DATA_A_LENGTH (0x8000 - 0x4000) +#define L1_DATA_B_LENGTH 0x8000 +#define BLKFIN_DCACHESIZE (16*1024) +#define BLKFIN_DSUPBANKS 1 +#else +#define DMEM_CNTR (ACACHE_BCACHE | ENDCPLB | PORT_PREF0) +#define L1_DATA_A_LENGTH (0x8000 - 0x4000) +#define L1_DATA_B_LENGTH (0x8000 - 0x4000) +#define BLKFIN_DCACHESIZE (32*1024) +#define BLKFIN_DSUPBANKS 2 +#endif + +#else +#define DMEM_CNTR (ASRAM_BSRAM | ENDCPLB | PORT_PREF0) +#define L1_DATA_A_LENGTH 0x8000 +#define L1_DATA_B_LENGTH 0x8000 +#define BLKFIN_DCACHESIZE (0*1024) +#define BLKFIN_DSUPBANKS 0 +#endif /*CONFIG_BLKFIN_DCACHE*/ + +/* Scratch Pad Memory */ + +#if defined(CONFIG_BF54x) +#define L1_SCRATCH_START 0xFFB00000 +#define L1_SCRATCH_LENGTH 0x1000 +#endif + +#endif/* _MEM_MAP_548_H_ */ |