diff options
Diffstat (limited to 'include/asm-ia64/mca_asm.h')
| -rw-r--r-- | include/asm-ia64/mca_asm.h | 312 |
1 files changed, 312 insertions, 0 deletions
diff --git a/include/asm-ia64/mca_asm.h b/include/asm-ia64/mca_asm.h new file mode 100644 index 000000000000..836953e0f91f --- /dev/null +++ b/include/asm-ia64/mca_asm.h @@ -0,0 +1,312 @@ +/* + * File: mca_asm.h + * + * Copyright (C) 1999 Silicon Graphics, Inc. + * Copyright (C) Vijay Chander (vijay@engr.sgi.com) + * Copyright (C) Srinivasa Thirumalachar <sprasad@engr.sgi.com> + * Copyright (C) 2000 Hewlett-Packard Co. + * Copyright (C) 2000 David Mosberger-Tang <davidm@hpl.hp.com> + * Copyright (C) 2002 Intel Corp. + * Copyright (C) 2002 Jenna Hall <jenna.s.hall@intel.com> + */ +#ifndef _ASM_IA64_MCA_ASM_H +#define _ASM_IA64_MCA_ASM_H + +#define PSR_IC 13 +#define PSR_I 14 +#define PSR_DT 17 +#define PSR_RT 27 +#define PSR_MC 35 +#define PSR_IT 36 +#define PSR_BN 44 + +/* + * This macro converts a instruction virtual address to a physical address + * Right now for simulation purposes the virtual addresses are + * direct mapped to physical addresses. + * 1. Lop off bits 61 thru 63 in the virtual address + */ +#define INST_VA_TO_PA(addr) \ + dep addr = 0, addr, 61, 3 +/* + * This macro converts a data virtual address to a physical address + * Right now for simulation purposes the virtual addresses are + * direct mapped to physical addresses. + * 1. Lop off bits 61 thru 63 in the virtual address + */ +#define DATA_VA_TO_PA(addr) \ + tpa addr = addr +/* + * This macro converts a data physical address to a virtual address + * Right now for simulation purposes the virtual addresses are + * direct mapped to physical addresses. + * 1. Put 0x7 in bits 61 thru 63. + */ +#define DATA_PA_TO_VA(addr,temp) \ + mov temp = 0x7 ;; \ + dep addr = temp, addr, 61, 3 + +#define GET_THIS_PADDR(reg, var) \ + mov reg = IA64_KR(PER_CPU_DATA);; \ + addl reg = THIS_CPU(var), reg + +/* + * This macro jumps to the instruction at the given virtual address + * and starts execution in physical mode with all the address + * translations turned off. + * 1. Save the current psr + * 2. Make sure that all the upper 32 bits are off + * + * 3. Clear the interrupt enable and interrupt state collection bits + * in the psr before updating the ipsr and iip. + * + * 4. Turn off the instruction, data and rse translation bits of the psr + * and store the new value into ipsr + * Also make sure that the interrupts are disabled. + * Ensure that we are in little endian mode. + * [psr.{rt, it, dt, i, be} = 0] + * + * 5. Get the physical address corresponding to the virtual address + * of the next instruction bundle and put it in iip. + * (Using magic numbers 24 and 40 in the deposint instruction since + * the IA64_SDK code directly maps to lower 24bits as physical address + * from a virtual address). + * + * 6. Do an rfi to move the values from ipsr to psr and iip to ip. + */ +#define PHYSICAL_MODE_ENTER(temp1, temp2, start_addr, old_psr) \ + mov old_psr = psr; \ + ;; \ + dep old_psr = 0, old_psr, 32, 32; \ + \ + mov ar.rsc = 0 ; \ + ;; \ + srlz.d; \ + mov temp2 = ar.bspstore; \ + ;; \ + DATA_VA_TO_PA(temp2); \ + ;; \ + mov temp1 = ar.rnat; \ + ;; \ + mov ar.bspstore = temp2; \ + ;; \ + mov ar.rnat = temp1; \ + mov temp1 = psr; \ + mov temp2 = psr; \ + ;; \ + \ + dep temp2 = 0, temp2, PSR_IC, 2; \ + ;; \ + mov psr.l = temp2; \ + ;; \ + srlz.d; \ + dep temp1 = 0, temp1, 32, 32; \ + ;; \ + dep temp1 = 0, temp1, PSR_IT, 1; \ + ;; \ + dep temp1 = 0, temp1, PSR_DT, 1; \ + ;; \ + dep temp1 = 0, temp1, PSR_RT, 1; \ + ;; \ + dep temp1 = 0, temp1, PSR_I, 1; \ + ;; \ + dep temp1 = 0, temp1, PSR_IC, 1; \ + ;; \ + dep temp1 = -1, temp1, PSR_MC, 1; \ + ;; \ + mov cr.ipsr = temp1; \ + ;; \ + LOAD_PHYSICAL(p0, temp2, start_addr); \ + ;; \ + mov cr.iip = temp2; \ + mov cr.ifs = r0; \ + DATA_VA_TO_PA(sp); \ + DATA_VA_TO_PA(gp); \ + ;; \ + srlz.i; \ + ;; \ + nop 1; \ + nop 2; \ + nop 1; \ + nop 2; \ + rfi; \ + ;; + +/* + * This macro jumps to the instruction at the given virtual address + * and starts execution in virtual mode with all the address + * translations turned on. + * 1. Get the old saved psr + * + * 2. Clear the interrupt state collection bit in the current psr. + * + * 3. Set the instruction translation bit back in the old psr + * Note we have to do this since we are right now saving only the + * lower 32-bits of old psr.(Also the old psr has the data and + * rse translation bits on) + * + * 4. Set ipsr to this old_psr with "it" bit set and "bn" = 1. + * + * 5. Reset the current thread pointer (r13). + * + * 6. Set iip to the virtual address of the next instruction bundle. + * + * 7. Do an rfi to move ipsr to psr and iip to ip. + */ + +#define VIRTUAL_MODE_ENTER(temp1, temp2, start_addr, old_psr) \ + mov temp2 = psr; \ + ;; \ + mov old_psr = temp2; \ + ;; \ + dep temp2 = 0, temp2, PSR_IC, 2; \ + ;; \ + mov psr.l = temp2; \ + mov ar.rsc = 0; \ + ;; \ + srlz.d; \ + mov r13 = ar.k6; \ + mov temp2 = ar.bspstore; \ + ;; \ + DATA_PA_TO_VA(temp2,temp1); \ + ;; \ + mov temp1 = ar.rnat; \ + ;; \ + mov ar.bspstore = temp2; \ + ;; \ + mov ar.rnat = temp1; \ + ;; \ + mov temp1 = old_psr; \ + ;; \ + mov temp2 = 1; \ + ;; \ + dep temp1 = temp2, temp1, PSR_IC, 1; \ + ;; \ + dep temp1 = temp2, temp1, PSR_IT, 1; \ + ;; \ + dep temp1 = temp2, temp1, PSR_DT, 1; \ + ;; \ + dep temp1 = temp2, temp1, PSR_RT, 1; \ + ;; \ + dep temp1 = temp2, temp1, PSR_BN, 1; \ + ;; \ + \ + mov cr.ipsr = temp1; \ + movl temp2 = start_addr; \ + ;; \ + mov cr.iip = temp2; \ + ;; \ + DATA_PA_TO_VA(sp, temp1); \ + DATA_PA_TO_VA(gp, temp2); \ + srlz.i; \ + ;; \ + nop 1; \ + nop 2; \ + nop 1; \ + rfi \ + ;; + +/* + * The following offsets capture the order in which the + * RSE related registers from the old context are + * saved onto the new stack frame. + * + * +-----------------------+ + * |NDIRTY [BSP - BSPSTORE]| + * +-----------------------+ + * | RNAT | + * +-----------------------+ + * | BSPSTORE | + * +-----------------------+ + * | IFS | + * +-----------------------+ + * | PFS | + * +-----------------------+ + * | RSC | + * +-----------------------+ <-------- Bottom of new stack frame + */ +#define rse_rsc_offset 0 +#define rse_pfs_offset (rse_rsc_offset+0x08) +#define rse_ifs_offset (rse_pfs_offset+0x08) +#define rse_bspstore_offset (rse_ifs_offset+0x08) +#define rse_rnat_offset (rse_bspstore_offset+0x08) +#define rse_ndirty_offset (rse_rnat_offset+0x08) + +/* + * rse_switch_context + * + * 1. Save old RSC onto the new stack frame + * 2. Save PFS onto new stack frame + * 3. Cover the old frame and start a new frame. + * 4. Save IFS onto new stack frame + * 5. Save the old BSPSTORE on the new stack frame + * 6. Save the old RNAT on the new stack frame + * 7. Write BSPSTORE with the new backing store pointer + * 8. Read and save the new BSP to calculate the #dirty registers + * NOTE: Look at pages 11-10, 11-11 in PRM Vol 2 + */ +#define rse_switch_context(temp,p_stackframe,p_bspstore) \ + ;; \ + mov temp=ar.rsc;; \ + st8 [p_stackframe]=temp,8;; \ + mov temp=ar.pfs;; \ + st8 [p_stackframe]=temp,8; \ + cover ;; \ + mov temp=cr.ifs;; \ + st8 [p_stackframe]=temp,8;; \ + mov temp=ar.bspstore;; \ + st8 [p_stackframe]=temp,8;; \ + mov temp=ar.rnat;; \ + st8 [p_stackframe]=temp,8; \ + mov ar.bspstore=p_bspstore;; \ + mov temp=ar.bsp;; \ + sub temp=temp,p_bspstore;; \ + st8 [p_stackframe]=temp,8;; + +/* + * rse_return_context + * 1. Allocate a zero-sized frame + * 2. Store the number of dirty registers RSC.loadrs field + * 3. Issue a loadrs to insure that any registers from the interrupted + * context which were saved on the new stack frame have been loaded + * back into the stacked registers + * 4. Restore BSPSTORE + * 5. Restore RNAT + * 6. Restore PFS + * 7. Restore IFS + * 8. Restore RSC + * 9. Issue an RFI + */ +#define rse_return_context(psr_mask_reg,temp,p_stackframe) \ + ;; \ + alloc temp=ar.pfs,0,0,0,0; \ + add p_stackframe=rse_ndirty_offset,p_stackframe;; \ + ld8 temp=[p_stackframe];; \ + shl temp=temp,16;; \ + mov ar.rsc=temp;; \ + loadrs;; \ + add p_stackframe=-rse_ndirty_offset+rse_bspstore_offset,p_stackframe;;\ + ld8 temp=[p_stackframe];; \ + mov ar.bspstore=temp;; \ + add p_stackframe=-rse_bspstore_offset+rse_rnat_offset,p_stackframe;;\ + ld8 temp=[p_stackframe];; \ + mov ar.rnat=temp;; \ + add p_stackframe=-rse_rnat_offset+rse_pfs_offset,p_stackframe;; \ + ld8 temp=[p_stackframe];; \ + mov ar.pfs=temp;; \ + add p_stackframe=-rse_pfs_offset+rse_ifs_offset,p_stackframe;; \ + ld8 temp=[p_stackframe];; \ + mov cr.ifs=temp;; \ + add p_stackframe=-rse_ifs_offset+rse_rsc_offset,p_stackframe;; \ + ld8 temp=[p_stackframe];; \ + mov ar.rsc=temp ; \ + mov temp=psr;; \ + or temp=temp,psr_mask_reg;; \ + mov cr.ipsr=temp;; \ + mov temp=ip;; \ + add temp=0x30,temp;; \ + mov cr.iip=temp;; \ + srlz.i;; \ + rfi;; + +#endif /* _ASM_IA64_MCA_ASM_H */ |