diff options
Diffstat (limited to 'include/asm-mips/mach-au1x00/au1000_dma.h')
| -rw-r--r-- | include/asm-mips/mach-au1x00/au1000_dma.h | 458 |
1 files changed, 0 insertions, 458 deletions
diff --git a/include/asm-mips/mach-au1x00/au1000_dma.h b/include/asm-mips/mach-au1x00/au1000_dma.h deleted file mode 100644 index c333b4e1cd44..000000000000 --- a/include/asm-mips/mach-au1x00/au1000_dma.h +++ /dev/null @@ -1,458 +0,0 @@ -/* - * BRIEF MODULE DESCRIPTION - * Defines for using and allocating DMA channels on the Alchemy - * Au1x00 MIPS processors. - * - * Copyright 2000, 2008 MontaVista Software Inc. - * Author: MontaVista Software, Inc. <source@mvista.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - * - */ -#ifndef __ASM_AU1000_DMA_H -#define __ASM_AU1000_DMA_H - -#include <linux/io.h> /* need byte IO */ -#include <linux/spinlock.h> /* And spinlocks */ -#include <linux/delay.h> -#include <asm/system.h> - -#define NUM_AU1000_DMA_CHANNELS 8 - -/* DMA Channel Base Addresses */ -#define DMA_CHANNEL_BASE 0xB4002000 -#define DMA_CHANNEL_LEN 0x00000100 - -/* DMA Channel Register Offsets */ -#define DMA_MODE_SET 0x00000000 -#define DMA_MODE_READ DMA_MODE_SET -#define DMA_MODE_CLEAR 0x00000004 -/* DMA Mode register bits follow */ -#define DMA_DAH_MASK (0x0f << 20) -#define DMA_DID_BIT 16 -#define DMA_DID_MASK (0x0f << DMA_DID_BIT) -#define DMA_DS (1 << 15) -#define DMA_BE (1 << 13) -#define DMA_DR (1 << 12) -#define DMA_TS8 (1 << 11) -#define DMA_DW_BIT 9 -#define DMA_DW_MASK (0x03 << DMA_DW_BIT) -#define DMA_DW8 (0 << DMA_DW_BIT) -#define DMA_DW16 (1 << DMA_DW_BIT) -#define DMA_DW32 (2 << DMA_DW_BIT) -#define DMA_NC (1 << 8) -#define DMA_IE (1 << 7) -#define DMA_HALT (1 << 6) -#define DMA_GO (1 << 5) -#define DMA_AB (1 << 4) -#define DMA_D1 (1 << 3) -#define DMA_BE1 (1 << 2) -#define DMA_D0 (1 << 1) -#define DMA_BE0 (1 << 0) - -#define DMA_PERIPHERAL_ADDR 0x00000008 -#define DMA_BUFFER0_START 0x0000000C -#define DMA_BUFFER1_START 0x00000014 -#define DMA_BUFFER0_COUNT 0x00000010 -#define DMA_BUFFER1_COUNT 0x00000018 -#define DMA_BAH_BIT 16 -#define DMA_BAH_MASK (0x0f << DMA_BAH_BIT) -#define DMA_COUNT_BIT 0 -#define DMA_COUNT_MASK (0xffff << DMA_COUNT_BIT) - -/* DMA Device IDs follow */ -enum { - DMA_ID_UART0_TX = 0, - DMA_ID_UART0_RX, - DMA_ID_GP04, - DMA_ID_GP05, - DMA_ID_AC97C_TX, - DMA_ID_AC97C_RX, - DMA_ID_UART3_TX, - DMA_ID_UART3_RX, - DMA_ID_USBDEV_EP0_RX, - DMA_ID_USBDEV_EP0_TX, - DMA_ID_USBDEV_EP2_TX, - DMA_ID_USBDEV_EP3_TX, - DMA_ID_USBDEV_EP4_RX, - DMA_ID_USBDEV_EP5_RX, - DMA_ID_I2S_TX, - DMA_ID_I2S_RX, - DMA_NUM_DEV -}; - -/* DMA Device ID's for 2nd bank (AU1100) follow */ -enum { - DMA_ID_SD0_TX = 0, - DMA_ID_SD0_RX, - DMA_ID_SD1_TX, - DMA_ID_SD1_RX, - DMA_NUM_DEV_BANK2 -}; - -struct dma_chan { - int dev_id; /* this channel is allocated if >= 0, */ - /* free otherwise */ - unsigned int io; - const char *dev_str; - int irq; - void *irq_dev; - unsigned int fifo_addr; - unsigned int mode; -}; - -/* These are in arch/mips/au1000/common/dma.c */ -extern struct dma_chan au1000_dma_table[]; -extern int request_au1000_dma(int dev_id, - const char *dev_str, - irq_handler_t irqhandler, - unsigned long irqflags, - void *irq_dev_id); -extern void free_au1000_dma(unsigned int dmanr); -extern int au1000_dma_read_proc(char *buf, char **start, off_t fpos, - int length, int *eof, void *data); -extern void dump_au1000_dma_channel(unsigned int dmanr); -extern spinlock_t au1000_dma_spin_lock; - -static inline struct dma_chan *get_dma_chan(unsigned int dmanr) -{ - if (dmanr >= NUM_AU1000_DMA_CHANNELS || - au1000_dma_table[dmanr].dev_id < 0) - return NULL; - return &au1000_dma_table[dmanr]; -} - -static inline unsigned long claim_dma_lock(void) -{ - unsigned long flags; - - spin_lock_irqsave(&au1000_dma_spin_lock, flags); - return flags; -} - -static inline void release_dma_lock(unsigned long flags) -{ - spin_unlock_irqrestore(&au1000_dma_spin_lock, flags); -} - -/* - * Set the DMA buffer enable bits in the mode register. - */ -static inline void enable_dma_buffer0(unsigned int dmanr) -{ - struct dma_chan *chan = get_dma_chan(dmanr); - - if (!chan) - return; - au_writel(DMA_BE0, chan->io + DMA_MODE_SET); -} - -static inline void enable_dma_buffer1(unsigned int dmanr) -{ - struct dma_chan *chan = get_dma_chan(dmanr); - - if (!chan) - return; - au_writel(DMA_BE1, chan->io + DMA_MODE_SET); -} -static inline void enable_dma_buffers(unsigned int dmanr) -{ - struct dma_chan *chan = get_dma_chan(dmanr); - - if (!chan) - return; - au_writel(DMA_BE0 | DMA_BE1, chan->io + DMA_MODE_SET); -} - -static inline void start_dma(unsigned int dmanr) -{ - struct dma_chan *chan = get_dma_chan(dmanr); - - if (!chan) - return; - au_writel(DMA_GO, chan->io + DMA_MODE_SET); -} - -#define DMA_HALT_POLL 0x5000 - -static inline void halt_dma(unsigned int dmanr) -{ - struct dma_chan *chan = get_dma_chan(dmanr); - int i; - - if (!chan) - return; - au_writel(DMA_GO, chan->io + DMA_MODE_CLEAR); - - /* Poll the halt bit */ - for (i = 0; i < DMA_HALT_POLL; i++) - if (au_readl(chan->io + DMA_MODE_READ) & DMA_HALT) - break; - if (i == DMA_HALT_POLL) - printk(KERN_INFO "halt_dma: HALT poll expired!\n"); -} - -static inline void disable_dma(unsigned int dmanr) -{ - struct dma_chan *chan = get_dma_chan(dmanr); - - if (!chan) - return; - - halt_dma(dmanr); - - /* Now we can disable the buffers */ - au_writel(~DMA_GO, chan->io + DMA_MODE_CLEAR); -} - -static inline int dma_halted(unsigned int dmanr) -{ - struct dma_chan *chan = get_dma_chan(dmanr); - - if (!chan) - return 1; - return (au_readl(chan->io + DMA_MODE_READ) & DMA_HALT) ? 1 : 0; -} - -/* Initialize a DMA channel. */ -static inline void init_dma(unsigned int dmanr) -{ - struct dma_chan *chan = get_dma_chan(dmanr); - u32 mode; - - if (!chan) - return; - - disable_dma(dmanr); - - /* Set device FIFO address */ - au_writel(CPHYSADDR(chan->fifo_addr), chan->io + DMA_PERIPHERAL_ADDR); - - mode = chan->mode | (chan->dev_id << DMA_DID_BIT); - if (chan->irq) - mode |= DMA_IE; - - au_writel(~mode, chan->io + DMA_MODE_CLEAR); - au_writel(mode, chan->io + DMA_MODE_SET); -} - -/* - * Set mode for a specific DMA channel - */ -static inline void set_dma_mode(unsigned int dmanr, unsigned int mode) -{ - struct dma_chan *chan = get_dma_chan(dmanr); - - if (!chan) - return; - /* - * set_dma_mode is only allowed to change endianess, direction, - * transfer size, device FIFO width, and coherency settings. - * Make sure anything else is masked off. - */ - mode &= (DMA_BE | DMA_DR | DMA_TS8 | DMA_DW_MASK | DMA_NC); - chan->mode &= ~(DMA_BE | DMA_DR | DMA_TS8 | DMA_DW_MASK | DMA_NC); - chan->mode |= mode; -} - -static inline unsigned int get_dma_mode(unsigned int dmanr) -{ - struct dma_chan *chan = get_dma_chan(dmanr); - - if (!chan) - return 0; - return chan->mode; -} - -static inline int get_dma_active_buffer(unsigned int dmanr) -{ - struct dma_chan *chan = get_dma_chan(dmanr); - - if (!chan) - return -1; - return (au_readl(chan->io + DMA_MODE_READ) & DMA_AB) ? 1 : 0; -} - -/* - * Set the device FIFO address for a specific DMA channel - only - * applicable to GPO4 and GPO5. All the other devices have fixed - * FIFO addresses. - */ -static inline void set_dma_fifo_addr(unsigned int dmanr, unsigned int a) -{ - struct dma_chan *chan = get_dma_chan(dmanr); - - if (!chan) - return; - - if (chan->mode & DMA_DS) /* second bank of device IDs */ - return; - - if (chan->dev_id != DMA_ID_GP04 && chan->dev_id != DMA_ID_GP05) - return; - - au_writel(CPHYSADDR(a), chan->io + DMA_PERIPHERAL_ADDR); -} - -/* - * Clear the DMA buffer done bits in the mode register. - */ -static inline void clear_dma_done0(unsigned int dmanr) -{ - struct dma_chan *chan = get_dma_chan(dmanr); - - if (!chan) - return; - au_writel(DMA_D0, chan->io + DMA_MODE_CLEAR); -} - -static inline void clear_dma_done1(unsigned int dmanr) -{ - struct dma_chan *chan = get_dma_chan(dmanr); - - if (!chan) - return; - au_writel(DMA_D1, chan->io + DMA_MODE_CLEAR); -} - -/* - * This does nothing - not applicable to Au1000 DMA. - */ -static inline void set_dma_page(unsigned int dmanr, char pagenr) -{ -} - -/* - * Set Buffer 0 transfer address for specific DMA channel. - */ -static inline void set_dma_addr0(unsigned int dmanr, unsigned int a) -{ - struct dma_chan *chan = get_dma_chan(dmanr); - - if (!chan) - return; - au_writel(a, chan->io + DMA_BUFFER0_START); -} - -/* - * Set Buffer 1 transfer address for specific DMA channel. - */ -static inline void set_dma_addr1(unsigned int dmanr, unsigned int a) -{ - struct dma_chan *chan = get_dma_chan(dmanr); - - if (!chan) - return; - au_writel(a, chan->io + DMA_BUFFER1_START); -} - - -/* - * Set Buffer 0 transfer size (max 64k) for a specific DMA channel. - */ -static inline void set_dma_count0(unsigned int dmanr, unsigned int count) -{ - struct dma_chan *chan = get_dma_chan(dmanr); - - if (!chan) - return; - count &= DMA_COUNT_MASK; - au_writel(count, chan->io + DMA_BUFFER0_COUNT); -} - -/* - * Set Buffer 1 transfer size (max 64k) for a specific DMA channel. - */ -static inline void set_dma_count1(unsigned int dmanr, unsigned int count) -{ - struct dma_chan *chan = get_dma_chan(dmanr); - - if (!chan) - return; - count &= DMA_COUNT_MASK; - au_writel(count, chan->io + DMA_BUFFER1_COUNT); -} - -/* - * Set both buffer transfer sizes (max 64k) for a specific DMA channel. - */ -static inline void set_dma_count(unsigned int dmanr, unsigned int count) -{ - struct dma_chan *chan = get_dma_chan(dmanr); - - if (!chan) - return; - count &= DMA_COUNT_MASK; - au_writel(count, chan->io + DMA_BUFFER0_COUNT); - au_writel(count, chan->io + DMA_BUFFER1_COUNT); -} - -/* - * Returns which buffer has its done bit set in the mode register. - * Returns -1 if neither or both done bits set. - */ -static inline unsigned int get_dma_buffer_done(unsigned int dmanr) -{ - struct dma_chan *chan = get_dma_chan(dmanr); - - if (!chan) - return 0; - return au_readl(chan->io + DMA_MODE_READ) & (DMA_D0 | DMA_D1); -} - - -/* - * Returns the DMA channel's Buffer Done IRQ number. - */ -static inline int get_dma_done_irq(unsigned int dmanr) -{ - struct dma_chan *chan = get_dma_chan(dmanr); - - if (!chan) - return -1; - return chan->irq; -} - -/* - * Get DMA residue count. Returns the number of _bytes_ left to transfer. - */ -static inline int get_dma_residue(unsigned int dmanr) -{ - int curBufCntReg, count; - struct dma_chan *chan = get_dma_chan(dmanr); - - if (!chan) - return 0; - - curBufCntReg = (au_readl(chan->io + DMA_MODE_READ) & DMA_AB) ? - DMA_BUFFER1_COUNT : DMA_BUFFER0_COUNT; - - count = au_readl(chan->io + curBufCntReg) & DMA_COUNT_MASK; - - if ((chan->mode & DMA_DW_MASK) == DMA_DW16) - count <<= 1; - else if ((chan->mode & DMA_DW_MASK) == DMA_DW32) - count <<= 2; - - return count; -} - -#endif /* __ASM_AU1000_DMA_H */ |