diff options
Diffstat (limited to 'include/asm-powerpc/cpm2.h')
| -rw-r--r-- | include/asm-powerpc/cpm2.h | 1195 |
1 files changed, 0 insertions, 1195 deletions
diff --git a/include/asm-powerpc/cpm2.h b/include/asm-powerpc/cpm2.h deleted file mode 100644 index 2a6fa0183ac9..000000000000 --- a/include/asm-powerpc/cpm2.h +++ /dev/null @@ -1,1195 +0,0 @@ -/* - * Communication Processor Module v2. - * - * This file contains structures and information for the communication - * processor channels found in the dual port RAM or parameter RAM. - * All CPM control and status is available through the CPM2 internal - * memory map. See immap_cpm2.h for details. - */ -#ifdef __KERNEL__ -#ifndef __CPM2__ -#define __CPM2__ - -#include <asm/immap_cpm2.h> -#include <asm/cpm.h> -#include <sysdev/fsl_soc.h> - -#ifdef CONFIG_PPC_85xx -#define CPM_MAP_ADDR (get_immrbase() + 0x80000) -#endif - -/* CPM Command register. -*/ -#define CPM_CR_RST ((uint)0x80000000) -#define CPM_CR_PAGE ((uint)0x7c000000) -#define CPM_CR_SBLOCK ((uint)0x03e00000) -#define CPM_CR_FLG ((uint)0x00010000) -#define CPM_CR_MCN ((uint)0x00003fc0) -#define CPM_CR_OPCODE ((uint)0x0000000f) - -/* Device sub-block and page codes. -*/ -#define CPM_CR_SCC1_SBLOCK (0x04) -#define CPM_CR_SCC2_SBLOCK (0x05) -#define CPM_CR_SCC3_SBLOCK (0x06) -#define CPM_CR_SCC4_SBLOCK (0x07) -#define CPM_CR_SMC1_SBLOCK (0x08) -#define CPM_CR_SMC2_SBLOCK (0x09) -#define CPM_CR_SPI_SBLOCK (0x0a) -#define CPM_CR_I2C_SBLOCK (0x0b) -#define CPM_CR_TIMER_SBLOCK (0x0f) -#define CPM_CR_RAND_SBLOCK (0x0e) -#define CPM_CR_FCC1_SBLOCK (0x10) -#define CPM_CR_FCC2_SBLOCK (0x11) -#define CPM_CR_FCC3_SBLOCK (0x12) -#define CPM_CR_IDMA1_SBLOCK (0x14) -#define CPM_CR_IDMA2_SBLOCK (0x15) -#define CPM_CR_IDMA3_SBLOCK (0x16) -#define CPM_CR_IDMA4_SBLOCK (0x17) -#define CPM_CR_MCC1_SBLOCK (0x1c) - -#define CPM_CR_FCC_SBLOCK(x) (x + 0x10) - -#define CPM_CR_SCC1_PAGE (0x00) -#define CPM_CR_SCC2_PAGE (0x01) -#define CPM_CR_SCC3_PAGE (0x02) -#define CPM_CR_SCC4_PAGE (0x03) -#define CPM_CR_SMC1_PAGE (0x07) -#define CPM_CR_SMC2_PAGE (0x08) -#define CPM_CR_SPI_PAGE (0x09) -#define CPM_CR_I2C_PAGE (0x0a) -#define CPM_CR_TIMER_PAGE (0x0a) -#define CPM_CR_RAND_PAGE (0x0a) -#define CPM_CR_FCC1_PAGE (0x04) -#define CPM_CR_FCC2_PAGE (0x05) -#define CPM_CR_FCC3_PAGE (0x06) -#define CPM_CR_IDMA1_PAGE (0x07) -#define CPM_CR_IDMA2_PAGE (0x08) -#define CPM_CR_IDMA3_PAGE (0x09) -#define CPM_CR_IDMA4_PAGE (0x0a) -#define CPM_CR_MCC1_PAGE (0x07) -#define CPM_CR_MCC2_PAGE (0x08) - -#define CPM_CR_FCC_PAGE(x) (x + 0x04) - -/* CPM2-specific opcodes (see cpm.h for common opcodes) -*/ -#define CPM_CR_START_IDMA ((ushort)0x0009) - -#define mk_cr_cmd(PG, SBC, MCN, OP) \ - ((PG << 26) | (SBC << 21) | (MCN << 6) | OP) - -/* The number of pages of host memory we allocate for CPM. This is - * done early in kernel initialization to get physically contiguous - * pages. - */ -#define NUM_CPM_HOST_PAGES 2 - -/* Export the base address of the communication processor registers - * and dual port ram. - */ -extern cpm_cpm2_t __iomem *cpmp; /* Pointer to comm processor */ - -#define cpm_dpalloc cpm_muram_alloc -#define cpm_dpfree cpm_muram_free -#define cpm_dpram_addr cpm_muram_addr - -extern void cpm2_reset(void); - -/* Baud rate generators. -*/ -#define CPM_BRG_RST ((uint)0x00020000) -#define CPM_BRG_EN ((uint)0x00010000) -#define CPM_BRG_EXTC_INT ((uint)0x00000000) -#define CPM_BRG_EXTC_CLK3_9 ((uint)0x00004000) -#define CPM_BRG_EXTC_CLK5_15 ((uint)0x00008000) -#define CPM_BRG_ATB ((uint)0x00002000) -#define CPM_BRG_CD_MASK ((uint)0x00001ffe) -#define CPM_BRG_DIV16 ((uint)0x00000001) - -#define CPM2_BRG_INT_CLK (get_brgfreq()) -#define CPM2_BRG_UART_CLK (CPM2_BRG_INT_CLK/16) - -extern void __cpm2_setbrg(uint brg, uint rate, uint clk, int div16, int src); - -/* This function is used by UARTS, or anything else that uses a 16x - * oversampled clock. - */ -static inline void cpm_setbrg(uint brg, uint rate) -{ - __cpm2_setbrg(brg, rate, CPM2_BRG_UART_CLK, 0, CPM_BRG_EXTC_INT); -} - -/* This function is used to set high speed synchronous baud rate - * clocks. - */ -static inline void cpm2_fastbrg(uint brg, uint rate, int div16) -{ - __cpm2_setbrg(brg, rate, CPM2_BRG_INT_CLK, div16, CPM_BRG_EXTC_INT); -} - -/* Function code bits, usually generic to devices. -*/ -#define CPMFCR_GBL ((u_char)0x20) /* Set memory snooping */ -#define CPMFCR_EB ((u_char)0x10) /* Set big endian byte order */ -#define CPMFCR_TC2 ((u_char)0x04) /* Transfer code 2 value */ -#define CPMFCR_DTB ((u_char)0x02) /* Use local bus for data when set */ -#define CPMFCR_BDB ((u_char)0x01) /* Use local bus for BD when set */ - -/* Parameter RAM offsets from the base. -*/ -#define PROFF_SCC1 ((uint)0x8000) -#define PROFF_SCC2 ((uint)0x8100) -#define PROFF_SCC3 ((uint)0x8200) -#define PROFF_SCC4 ((uint)0x8300) -#define PROFF_FCC1 ((uint)0x8400) -#define PROFF_FCC2 ((uint)0x8500) -#define PROFF_FCC3 ((uint)0x8600) -#define PROFF_MCC1 ((uint)0x8700) -#define PROFF_SMC1_BASE ((uint)0x87fc) -#define PROFF_IDMA1_BASE ((uint)0x87fe) -#define PROFF_MCC2 ((uint)0x8800) -#define PROFF_SMC2_BASE ((uint)0x88fc) -#define PROFF_IDMA2_BASE ((uint)0x88fe) -#define PROFF_SPI_BASE ((uint)0x89fc) -#define PROFF_IDMA3_BASE ((uint)0x89fe) -#define PROFF_TIMERS ((uint)0x8ae0) -#define PROFF_REVNUM ((uint)0x8af0) -#define PROFF_RAND ((uint)0x8af8) -#define PROFF_I2C_BASE ((uint)0x8afc) -#define PROFF_IDMA4_BASE ((uint)0x8afe) - -#define PROFF_SCC_SIZE ((uint)0x100) -#define PROFF_FCC_SIZE ((uint)0x100) -#define PROFF_SMC_SIZE ((uint)64) - -/* The SMCs are relocated to any of the first eight DPRAM pages. - * We will fix these at the first locations of DPRAM, until we - * get some microcode patches :-). - * The parameter ram space for the SMCs is fifty-some bytes, and - * they are required to start on a 64 byte boundary. - */ -#define PROFF_SMC1 (0) -#define PROFF_SMC2 (64) - - -/* Define enough so I can at least use the serial port as a UART. - */ -typedef struct smc_uart { - ushort smc_rbase; /* Rx Buffer descriptor base address */ - ushort smc_tbase; /* Tx Buffer descriptor base address */ - u_char smc_rfcr; /* Rx function code */ - u_char smc_tfcr; /* Tx function code */ - ushort smc_mrblr; /* Max receive buffer length */ - uint smc_rstate; /* Internal */ - uint smc_idp; /* Internal */ - ushort smc_rbptr; /* Internal */ - ushort smc_ibc; /* Internal */ - uint smc_rxtmp; /* Internal */ - uint smc_tstate; /* Internal */ - uint smc_tdp; /* Internal */ - ushort smc_tbptr; /* Internal */ - ushort smc_tbc; /* Internal */ - uint smc_txtmp; /* Internal */ - ushort smc_maxidl; /* Maximum idle characters */ - ushort smc_tmpidl; /* Temporary idle counter */ - ushort smc_brklen; /* Last received break length */ - ushort smc_brkec; /* rcv'd break condition counter */ - ushort smc_brkcr; /* xmt break count register */ - ushort smc_rmask; /* Temporary bit mask */ - uint smc_stmp; /* SDMA Temp */ -} smc_uart_t; - -/* SMC uart mode register (Internal memory map). -*/ -#define SMCMR_REN ((ushort)0x0001) -#define SMCMR_TEN ((ushort)0x0002) -#define SMCMR_DM ((ushort)0x000c) -#define SMCMR_SM_GCI ((ushort)0x0000) -#define SMCMR_SM_UART ((ushort)0x0020) -#define SMCMR_SM_TRANS ((ushort)0x0030) -#define SMCMR_SM_MASK ((ushort)0x0030) -#define SMCMR_PM_EVEN ((ushort)0x0100) /* Even parity, else odd */ -#define SMCMR_REVD SMCMR_PM_EVEN -#define SMCMR_PEN ((ushort)0x0200) /* Parity enable */ -#define SMCMR_BS SMCMR_PEN -#define SMCMR_SL ((ushort)0x0400) /* Two stops, else one */ -#define SMCR_CLEN_MASK ((ushort)0x7800) /* Character length */ -#define smcr_mk_clen(C) (((C) << 11) & SMCR_CLEN_MASK) - -/* SMC Event and Mask register. -*/ -#define SMCM_BRKE ((unsigned char)0x40) /* When in UART Mode */ -#define SMCM_BRK ((unsigned char)0x10) /* When in UART Mode */ -#define SMCM_TXE ((unsigned char)0x10) -#define SMCM_BSY ((unsigned char)0x04) -#define SMCM_TX ((unsigned char)0x02) -#define SMCM_RX ((unsigned char)0x01) - -/* SCCs. -*/ -#define SCC_GSMRH_IRP ((uint)0x00040000) -#define SCC_GSMRH_GDE ((uint)0x00010000) -#define SCC_GSMRH_TCRC_CCITT ((uint)0x00008000) -#define SCC_GSMRH_TCRC_BISYNC ((uint)0x00004000) -#define SCC_GSMRH_TCRC_HDLC ((uint)0x00000000) -#define SCC_GSMRH_REVD ((uint)0x00002000) -#define SCC_GSMRH_TRX ((uint)0x00001000) -#define SCC_GSMRH_TTX ((uint)0x00000800) -#define SCC_GSMRH_CDP ((uint)0x00000400) -#define SCC_GSMRH_CTSP ((uint)0x00000200) -#define SCC_GSMRH_CDS ((uint)0x00000100) -#define SCC_GSMRH_CTSS ((uint)0x00000080) -#define SCC_GSMRH_TFL ((uint)0x00000040) -#define SCC_GSMRH_RFW ((uint)0x00000020) -#define SCC_GSMRH_TXSY ((uint)0x00000010) -#define SCC_GSMRH_SYNL16 ((uint)0x0000000c) -#define SCC_GSMRH_SYNL8 ((uint)0x00000008) -#define SCC_GSMRH_SYNL4 ((uint)0x00000004) -#define SCC_GSMRH_RTSM ((uint)0x00000002) -#define SCC_GSMRH_RSYN ((uint)0x00000001) - -#define SCC_GSMRL_SIR ((uint)0x80000000) /* SCC2 only */ -#define SCC_GSMRL_EDGE_NONE ((uint)0x60000000) -#define SCC_GSMRL_EDGE_NEG ((uint)0x40000000) -#define SCC_GSMRL_EDGE_POS ((uint)0x20000000) -#define SCC_GSMRL_EDGE_BOTH ((uint)0x00000000) -#define SCC_GSMRL_TCI ((uint)0x10000000) -#define SCC_GSMRL_TSNC_3 ((uint)0x0c000000) -#define SCC_GSMRL_TSNC_4 ((uint)0x08000000) -#define SCC_GSMRL_TSNC_14 ((uint)0x04000000) -#define SCC_GSMRL_TSNC_INF ((uint)0x00000000) -#define SCC_GSMRL_RINV ((uint)0x02000000) -#define SCC_GSMRL_TINV ((uint)0x01000000) -#define SCC_GSMRL_TPL_128 ((uint)0x00c00000) -#define SCC_GSMRL_TPL_64 ((uint)0x00a00000) -#define SCC_GSMRL_TPL_48 ((uint)0x00800000) -#define SCC_GSMRL_TPL_32 ((uint)0x00600000) -#define SCC_GSMRL_TPL_16 ((uint)0x00400000) -#define SCC_GSMRL_TPL_8 ((uint)0x00200000) -#define SCC_GSMRL_TPL_NONE ((uint)0x00000000) -#define SCC_GSMRL_TPP_ALL1 ((uint)0x00180000) -#define SCC_GSMRL_TPP_01 ((uint)0x00100000) -#define SCC_GSMRL_TPP_10 ((uint)0x00080000) -#define SCC_GSMRL_TPP_ZEROS ((uint)0x00000000) -#define SCC_GSMRL_TEND ((uint)0x00040000) -#define SCC_GSMRL_TDCR_32 ((uint)0x00030000) -#define SCC_GSMRL_TDCR_16 ((uint)0x00020000) -#define SCC_GSMRL_TDCR_8 ((uint)0x00010000) -#define SCC_GSMRL_TDCR_1 ((uint)0x00000000) -#define SCC_GSMRL_RDCR_32 ((uint)0x0000c000) -#define SCC_GSMRL_RDCR_16 ((uint)0x00008000) -#define SCC_GSMRL_RDCR_8 ((uint)0x00004000) -#define SCC_GSMRL_RDCR_1 ((uint)0x00000000) -#define SCC_GSMRL_RENC_DFMAN ((uint)0x00003000) -#define SCC_GSMRL_RENC_MANCH ((uint)0x00002000) -#define SCC_GSMRL_RENC_FM0 ((uint)0x00001000) -#define SCC_GSMRL_RENC_NRZI ((uint)0x00000800) -#define SCC_GSMRL_RENC_NRZ ((uint)0x00000000) -#define SCC_GSMRL_TENC_DFMAN ((uint)0x00000600) -#define SCC_GSMRL_TENC_MANCH ((uint)0x00000400) -#define SCC_GSMRL_TENC_FM0 ((uint)0x00000200) -#define SCC_GSMRL_TENC_NRZI ((uint)0x00000100) -#define SCC_GSMRL_TENC_NRZ ((uint)0x00000000) -#define SCC_GSMRL_DIAG_LE ((uint)0x000000c0) /* Loop and echo */ -#define SCC_GSMRL_DIAG_ECHO ((uint)0x00000080) -#define SCC_GSMRL_DIAG_LOOP ((uint)0x00000040) -#define SCC_GSMRL_DIAG_NORM ((uint)0x00000000) -#define SCC_GSMRL_ENR ((uint)0x00000020) -#define SCC_GSMRL_ENT ((uint)0x00000010) -#define SCC_GSMRL_MODE_ENET ((uint)0x0000000c) -#define SCC_GSMRL_MODE_DDCMP ((uint)0x00000009) -#define SCC_GSMRL_MODE_BISYNC ((uint)0x00000008) -#define SCC_GSMRL_MODE_V14 ((uint)0x00000007) -#define SCC_GSMRL_MODE_AHDLC ((uint)0x00000006) -#define SCC_GSMRL_MODE_PROFIBUS ((uint)0x00000005) -#define SCC_GSMRL_MODE_UART ((uint)0x00000004) -#define SCC_GSMRL_MODE_SS7 ((uint)0x00000003) -#define SCC_GSMRL_MODE_ATALK ((uint)0x00000002) -#define SCC_GSMRL_MODE_HDLC ((uint)0x00000000) - -#define SCC_TODR_TOD ((ushort)0x8000) - -/* SCC Event and Mask register. -*/ -#define SCCM_TXE ((unsigned char)0x10) -#define SCCM_BSY ((unsigned char)0x04) -#define SCCM_TX ((unsigned char)0x02) -#define SCCM_RX ((unsigned char)0x01) - -typedef struct scc_param { - ushort scc_rbase; /* Rx Buffer descriptor base address */ - ushort scc_tbase; /* Tx Buffer descriptor base address */ - u_char scc_rfcr; /* Rx function code */ - u_char scc_tfcr; /* Tx function code */ - ushort scc_mrblr; /* Max receive buffer length */ - uint scc_rstate; /* Internal */ - uint scc_idp; /* Internal */ - ushort scc_rbptr; /* Internal */ - ushort scc_ibc; /* Internal */ - uint scc_rxtmp; /* Internal */ - uint scc_tstate; /* Internal */ - uint scc_tdp; /* Internal */ - ushort scc_tbptr; /* Internal */ - ushort scc_tbc; /* Internal */ - uint scc_txtmp; /* Internal */ - uint scc_rcrc; /* Internal */ - uint scc_tcrc; /* Internal */ -} sccp_t; - -/* CPM Ethernet through SCC1. - */ -typedef struct scc_enet { - sccp_t sen_genscc; - uint sen_cpres; /* Preset CRC */ - uint sen_cmask; /* Constant mask for CRC */ - uint sen_crcec; /* CRC Error counter */ - uint sen_alec; /* alignment error counter */ - uint sen_disfc; /* discard frame counter */ - ushort sen_pads; /* Tx short frame pad character */ - ushort sen_retlim; /* Retry limit threshold */ - ushort sen_retcnt; /* Retry limit counter */ - ushort sen_maxflr; /* maximum frame length register */ - ushort sen_minflr; /* minimum frame length register */ - ushort sen_maxd1; /* maximum DMA1 length */ - ushort sen_maxd2; /* maximum DMA2 length */ - ushort sen_maxd; /* Rx max DMA */ - ushort sen_dmacnt; /* Rx DMA counter */ - ushort sen_maxb; /* Max BD byte count */ - ushort sen_gaddr1; /* Group address filter */ - ushort sen_gaddr2; - ushort sen_gaddr3; - ushort sen_gaddr4; - uint sen_tbuf0data0; /* Save area 0 - current frame */ - uint sen_tbuf0data1; /* Save area 1 - current frame */ - uint sen_tbuf0rba; /* Internal */ - uint sen_tbuf0crc; /* Internal */ - ushort sen_tbuf0bcnt; /* Internal */ - ushort sen_paddrh; /* physical address (MSB) */ - ushort sen_paddrm; - ushort sen_paddrl; /* physical address (LSB) */ - ushort sen_pper; /* persistence */ - ushort sen_rfbdptr; /* Rx first BD pointer */ - ushort sen_tfbdptr; /* Tx first BD pointer */ - ushort sen_tlbdptr; /* Tx last BD pointer */ - uint sen_tbuf1data0; /* Save area 0 - current frame */ - uint sen_tbuf1data1; /* Save area 1 - current frame */ - uint sen_tbuf1rba; /* Internal */ - uint sen_tbuf1crc; /* Internal */ - ushort sen_tbuf1bcnt; /* Internal */ - ushort sen_txlen; /* Tx Frame length counter */ - ushort sen_iaddr1; /* Individual address filter */ - ushort sen_iaddr2; - ushort sen_iaddr3; - ushort sen_iaddr4; - ushort sen_boffcnt; /* Backoff counter */ - - /* NOTE: Some versions of the manual have the following items - * incorrectly documented. Below is the proper order. - */ - ushort sen_taddrh; /* temp address (MSB) */ - ushort sen_taddrm; - ushort sen_taddrl; /* temp address (LSB) */ -} scc_enet_t; - - -/* SCC Event register as used by Ethernet. -*/ -#define SCCE_ENET_GRA ((ushort)0x0080) /* Graceful stop complete */ -#define SCCE_ENET_TXE ((ushort)0x0010) /* Transmit Error */ -#define SCCE_ENET_RXF ((ushort)0x0008) /* Full frame received */ -#define SCCE_ENET_BSY ((ushort)0x0004) /* All incoming buffers full */ -#define SCCE_ENET_TXB ((ushort)0x0002) /* A buffer was transmitted */ -#define SCCE_ENET_RXB ((ushort)0x0001) /* A buffer was received */ - -/* SCC Mode Register (PSMR) as used by Ethernet. -*/ -#define SCC_PSMR_HBC ((ushort)0x8000) /* Enable heartbeat */ -#define SCC_PSMR_FC ((ushort)0x4000) /* Force collision */ -#define SCC_PSMR_RSH ((ushort)0x2000) /* Receive short frames */ -#define SCC_PSMR_IAM ((ushort)0x1000) /* Check individual hash */ -#define SCC_PSMR_ENCRC ((ushort)0x0800) /* Ethernet CRC mode */ -#define SCC_PSMR_PRO ((ushort)0x0200) /* Promiscuous mode */ -#define SCC_PSMR_BRO ((ushort)0x0100) /* Catch broadcast pkts */ -#define SCC_PSMR_SBT ((ushort)0x0080) /* Special backoff timer */ -#define SCC_PSMR_LPB ((ushort)0x0040) /* Set Loopback mode */ -#define SCC_PSMR_SIP ((ushort)0x0020) /* Sample Input Pins */ -#define SCC_PSMR_LCW ((ushort)0x0010) /* Late collision window */ -#define SCC_PSMR_NIB22 ((ushort)0x000a) /* Start frame search */ -#define SCC_PSMR_FDE ((ushort)0x0001) /* Full duplex enable */ - -/* SCC as UART -*/ -typedef struct scc_uart { - sccp_t scc_genscc; - uint scc_res1; /* Reserved */ - uint scc_res2; /* Reserved */ - ushort scc_maxidl; /* Maximum idle chars */ - ushort scc_idlc; /* temp idle counter */ - ushort scc_brkcr; /* Break count register */ - ushort scc_parec; /* receive parity error counter */ - ushort scc_frmec; /* receive framing error counter */ - ushort scc_nosec; /* receive noise counter */ - ushort scc_brkec; /* receive break condition counter */ - ushort scc_brkln; /* last received break length */ - ushort scc_uaddr1; /* UART address character 1 */ - ushort scc_uaddr2; /* UART address character 2 */ - ushort scc_rtemp; /* Temp storage */ - ushort scc_toseq; /* Transmit out of sequence char */ - ushort scc_char1; /* control character 1 */ - ushort scc_char2; /* control character 2 */ - ushort scc_char3; /* control character 3 */ - ushort scc_char4; /* control character 4 */ - ushort scc_char5; /* control character 5 */ - ushort scc_char6; /* control character 6 */ - ushort scc_char7; /* control character 7 */ - ushort scc_char8; /* control character 8 */ - ushort scc_rccm; /* receive control character mask */ - ushort scc_rccr; /* receive control character register */ - ushort scc_rlbc; /* receive last break character */ -} scc_uart_t; - -/* SCC Event and Mask registers when it is used as a UART. -*/ -#define UART_SCCM_GLR ((ushort)0x1000) -#define UART_SCCM_GLT ((ushort)0x0800) -#define UART_SCCM_AB ((ushort)0x0200) -#define UART_SCCM_IDL ((ushort)0x0100) -#define UART_SCCM_GRA ((ushort)0x0080) -#define UART_SCCM_BRKE ((ushort)0x0040) -#define UART_SCCM_BRKS ((ushort)0x0020) -#define UART_SCCM_CCR ((ushort)0x0008) -#define UART_SCCM_BSY ((ushort)0x0004) -#define UART_SCCM_TX ((ushort)0x0002) -#define UART_SCCM_RX ((ushort)0x0001) - -/* The SCC PSMR when used as a UART. -*/ -#define SCU_PSMR_FLC ((ushort)0x8000) -#define SCU_PSMR_SL ((ushort)0x4000) -#define SCU_PSMR_CL ((ushort)0x3000) -#define SCU_PSMR_UM ((ushort)0x0c00) -#define SCU_PSMR_FRZ ((ushort)0x0200) -#define SCU_PSMR_RZS ((ushort)0x0100) -#define SCU_PSMR_SYN ((ushort)0x0080) -#define SCU_PSMR_DRT ((ushort)0x0040) -#define SCU_PSMR_PEN ((ushort)0x0010) -#define SCU_PSMR_RPM ((ushort)0x000c) -#define SCU_PSMR_REVP ((ushort)0x0008) -#define SCU_PSMR_TPM ((ushort)0x0003) -#define SCU_PSMR_TEVP ((ushort)0x0002) - -/* CPM Transparent mode SCC. - */ -typedef struct scc_trans { - sccp_t st_genscc; - uint st_cpres; /* Preset CRC */ - uint st_cmask; /* Constant mask for CRC */ -} scc_trans_t; - -/* How about some FCCs..... -*/ -#define FCC_GFMR_DIAG_NORM ((uint)0x00000000) -#define FCC_GFMR_DIAG_LE ((uint)0x40000000) -#define FCC_GFMR_DIAG_AE ((uint)0x80000000) -#define FCC_GFMR_DIAG_ALE ((uint)0xc0000000) -#define FCC_GFMR_TCI ((uint)0x20000000) -#define FCC_GFMR_TRX ((uint)0x10000000) -#define FCC_GFMR_TTX ((uint)0x08000000) -#define FCC_GFMR_TTX ((uint)0x08000000) -#define FCC_GFMR_CDP ((uint)0x04000000) -#define FCC_GFMR_CTSP ((uint)0x02000000) -#define FCC_GFMR_CDS ((uint)0x01000000) -#define FCC_GFMR_CTSS ((uint)0x00800000) -#define FCC_GFMR_SYNL_NONE ((uint)0x00000000) -#define FCC_GFMR_SYNL_AUTO ((uint)0x00004000) -#define FCC_GFMR_SYNL_8 ((uint)0x00008000) -#define FCC_GFMR_SYNL_16 ((uint)0x0000c000) -#define FCC_GFMR_RTSM ((uint)0x00002000) -#define FCC_GFMR_RENC_NRZ ((uint)0x00000000) -#define FCC_GFMR_RENC_NRZI ((uint)0x00000800) -#define FCC_GFMR_REVD ((uint)0x00000400) -#define FCC_GFMR_TENC_NRZ ((uint)0x00000000) -#define FCC_GFMR_TENC_NRZI ((uint)0x00000100) -#define FCC_GFMR_TCRC_16 ((uint)0x00000000) -#define FCC_GFMR_TCRC_32 ((uint)0x00000080) -#define FCC_GFMR_ENR ((uint)0x00000020) -#define FCC_GFMR_ENT ((uint)0x00000010) -#define FCC_GFMR_MODE_ENET ((uint)0x0000000c) -#define FCC_GFMR_MODE_ATM ((uint)0x0000000a) -#define FCC_GFMR_MODE_HDLC ((uint)0x00000000) - -/* Generic FCC parameter ram. -*/ -typedef struct fcc_param { - ushort fcc_riptr; /* Rx Internal temp pointer */ - ushort fcc_tiptr; /* Tx Internal temp pointer */ - ushort fcc_res1; - ushort fcc_mrblr; /* Max receive buffer length, mod 32 bytes */ - uint fcc_rstate; /* Upper byte is Func code, must be set */ - uint fcc_rbase; /* Receive BD base */ - ushort fcc_rbdstat; /* RxBD status */ - ushort fcc_rbdlen; /* RxBD down counter */ - uint fcc_rdptr; /* RxBD internal data pointer */ - uint fcc_tstate; /* Upper byte is Func code, must be set */ - uint fcc_tbase; /* Transmit BD base */ - ushort fcc_tbdstat; /* TxBD status */ - ushort fcc_tbdlen; /* TxBD down counter */ - uint fcc_tdptr; /* TxBD internal data pointer */ - uint fcc_rbptr; /* Rx BD Internal buf pointer */ - uint fcc_tbptr; /* Tx BD Internal buf pointer */ - uint fcc_rcrc; /* Rx temp CRC */ - uint fcc_res2; - uint fcc_tcrc; /* Tx temp CRC */ -} fccp_t; - - -/* Ethernet controller through FCC. -*/ -typedef struct fcc_enet { - fccp_t fen_genfcc; - uint fen_statbuf; /* Internal status buffer */ - uint fen_camptr; /* CAM address */ - uint fen_cmask; /* Constant mask for CRC */ - uint fen_cpres; /* Preset CRC */ - uint fen_crcec; /* CRC Error counter */ - uint fen_alec; /* alignment error counter */ - uint fen_disfc; /* discard frame counter */ - ushort fen_retlim; /* Retry limit */ - ushort fen_retcnt; /* Retry counter */ - ushort fen_pper; /* Persistence */ - ushort fen_boffcnt; /* backoff counter */ - uint fen_gaddrh; /* Group address filter, high 32-bits */ - uint fen_gaddrl; /* Group address filter, low 32-bits */ - ushort fen_tfcstat; /* out of sequence TxBD */ - ushort fen_tfclen; - uint fen_tfcptr; - ushort fen_mflr; /* Maximum frame length (1518) */ - ushort fen_paddrh; /* MAC address */ - ushort fen_paddrm; - ushort fen_paddrl; - ushort fen_ibdcount; /* Internal BD counter */ - ushort fen_ibdstart; /* Internal BD start pointer */ - ushort fen_ibdend; /* Internal BD end pointer */ - ushort fen_txlen; /* Internal Tx frame length counter */ - uint fen_ibdbase[8]; /* Internal use */ - uint fen_iaddrh; /* Individual address filter */ - uint fen_iaddrl; - ushort fen_minflr; /* Minimum frame length (64) */ - ushort fen_taddrh; /* Filter transfer MAC address */ - ushort fen_taddrm; - ushort fen_taddrl; - ushort fen_padptr; /* Pointer to pad byte buffer */ - ushort fen_cftype; /* control frame type */ - ushort fen_cfrange; /* control frame range */ - ushort fen_maxb; /* maximum BD count */ - ushort fen_maxd1; /* Max DMA1 length (1520) */ - ushort fen_maxd2; /* Max DMA2 length (1520) */ - ushort fen_maxd; /* internal max DMA count */ - ushort fen_dmacnt; /* internal DMA counter */ - uint fen_octc; /* Total octect counter */ - uint fen_colc; /* Total collision counter */ - uint fen_broc; /* Total broadcast packet counter */ - uint fen_mulc; /* Total multicast packet count */ - uint fen_uspc; /* Total packets < 64 bytes */ - uint fen_frgc; /* Total packets < 64 bytes with errors */ - uint fen_ospc; /* Total packets > 1518 */ - uint fen_jbrc; /* Total packets > 1518 with errors */ - uint fen_p64c; /* Total packets == 64 bytes */ - uint fen_p65c; /* Total packets 64 < bytes <= 127 */ - uint fen_p128c; /* Total packets 127 < bytes <= 255 */ - uint fen_p256c; /* Total packets 256 < bytes <= 511 */ - uint fen_p512c; /* Total packets 512 < bytes <= 1023 */ - uint fen_p1024c; /* Total packets 1024 < bytes <= 1518 */ - uint fen_cambuf; /* Internal CAM buffer poiner */ - ushort fen_rfthr; /* Received frames threshold */ - ushort fen_rfcnt; /* Received frames count */ -} fcc_enet_t; - -/* FCC Event/Mask register as used by Ethernet. -*/ -#define FCC_ENET_GRA ((ushort)0x0080) /* Graceful stop complete */ -#define FCC_ENET_RXC ((ushort)0x0040) /* Control Frame Received */ -#define FCC_ENET_TXC ((ushort)0x0020) /* Out of seq. Tx sent */ -#define FCC_ENET_TXE ((ushort)0x0010) /* Transmit Error */ -#define FCC_ENET_RXF ((ushort)0x0008) /* Full frame received */ -#define FCC_ENET_BSY ((ushort)0x0004) /* Busy. Rx Frame dropped */ -#define FCC_ENET_TXB ((ushort)0x0002) /* A buffer was transmitted */ -#define FCC_ENET_RXB ((ushort)0x0001) /* A buffer was received */ - -/* FCC Mode Register (FPSMR) as used by Ethernet. -*/ -#define FCC_PSMR_HBC ((uint)0x80000000) /* Enable heartbeat */ -#define FCC_PSMR_FC ((uint)0x40000000) /* Force Collision */ -#define FCC_PSMR_SBT ((uint)0x20000000) /* Stop backoff timer */ -#define FCC_PSMR_LPB ((uint)0x10000000) /* Local protect. 1 = FDX */ -#define FCC_PSMR_LCW ((uint)0x08000000) /* Late collision select */ -#define FCC_PSMR_FDE ((uint)0x04000000) /* Full Duplex Enable */ -#define FCC_PSMR_MON ((uint)0x02000000) /* RMON Enable */ -#define FCC_PSMR_PRO ((uint)0x00400000) /* Promiscuous Enable */ -#define FCC_PSMR_FCE ((uint)0x00200000) /* Flow Control Enable */ -#define FCC_PSMR_RSH ((uint)0x00100000) /* Receive Short Frames */ -#define FCC_PSMR_CAM ((uint)0x00000400) /* CAM enable */ -#define FCC_PSMR_BRO ((uint)0x00000200) /* Broadcast pkt discard */ -#define FCC_PSMR_ENCRC ((uint)0x00000080) /* Use 32-bit CRC */ - -/* IIC parameter RAM. -*/ -typedef struct iic { - ushort iic_rbase; /* Rx Buffer descriptor base address */ - ushort iic_tbase; /* Tx Buffer descriptor base address */ - u_char iic_rfcr; /* Rx function code */ - u_char iic_tfcr; /* Tx function code */ - ushort iic_mrblr; /* Max receive buffer length */ - uint iic_rstate; /* Internal */ - uint iic_rdp; /* Internal */ - ushort iic_rbptr; /* Internal */ - ushort iic_rbc; /* Internal */ - uint iic_rxtmp; /* Internal */ - uint iic_tstate; /* Internal */ - uint iic_tdp; /* Internal */ - ushort iic_tbptr; /* Internal */ - ushort iic_tbc; /* Internal */ - uint iic_txtmp; /* Internal */ -} iic_t; - -/* SPI parameter RAM. -*/ -typedef struct spi { - ushort spi_rbase; /* Rx Buffer descriptor base address */ - ushort spi_tbase; /* Tx Buffer descriptor base address */ - u_char spi_rfcr; /* Rx function code */ - u_char spi_tfcr; /* Tx function code */ - ushort spi_mrblr; /* Max receive buffer length */ - uint spi_rstate; /* Internal */ - uint spi_rdp; /* Internal */ - ushort spi_rbptr; /* Internal */ - ushort spi_rbc; /* Internal */ - uint spi_rxtmp; /* Internal */ - uint spi_tstate; /* Internal */ - uint spi_tdp; /* Internal */ - ushort spi_tbptr; /* Internal */ - ushort spi_tbc; /* Internal */ - uint spi_txtmp; /* Internal */ - uint spi_res; /* Tx temp. */ - uint spi_res1[4]; /* SDMA temp. */ -} spi_t; - -/* SPI Mode register. -*/ -#define SPMODE_LOOP ((ushort)0x4000) /* Loopback */ -#define SPMODE_CI ((ushort)0x2000) /* Clock Invert */ -#define SPMODE_CP ((ushort)0x1000) /* Clock Phase */ -#define SPMODE_DIV16 ((ushort)0x0800) /* BRG/16 mode */ -#define SPMODE_REV ((ushort)0x0400) /* Reversed Data */ -#define SPMODE_MSTR ((ushort)0x0200) /* SPI Master */ -#define SPMODE_EN ((ushort)0x0100) /* Enable */ -#define SPMODE_LENMSK ((ushort)0x00f0) /* character length */ -#define SPMODE_PMMSK ((ushort)0x000f) /* prescale modulus */ - -#define SPMODE_LEN(x) ((((x)-1)&0xF)<<4) -#define SPMODE_PM(x) ((x) &0xF) - -#define SPI_EB ((u_char)0x10) /* big endian byte order */ - -/* IDMA parameter RAM -*/ -typedef struct idma { - ushort ibase; /* IDMA buffer descriptor table base address */ - ushort dcm; /* DMA channel mode */ - ushort ibdptr; /* IDMA current buffer descriptor pointer */ - ushort dpr_buf; /* IDMA transfer buffer base address */ - ushort buf_inv; /* internal buffer inventory */ - ushort ss_max; /* steady-state maximum transfer size */ - ushort dpr_in_ptr; /* write pointer inside the internal buffer */ - ushort sts; /* source transfer size */ - ushort dpr_out_ptr; /* read pointer inside the internal buffer */ - ushort seob; /* source end of burst */ - ushort deob; /* destination end of burst */ - ushort dts; /* destination transfer size */ - ushort ret_add; /* return address when working in ERM=1 mode */ - ushort res0; /* reserved */ - uint bd_cnt; /* internal byte count */ - uint s_ptr; /* source internal data pointer */ - uint d_ptr; /* destination internal data pointer */ - uint istate; /* internal state */ - u_char res1[20]; /* pad to 64-byte length */ -} idma_t; - -/* DMA channel mode bit fields -*/ -#define IDMA_DCM_FB ((ushort)0x8000) /* fly-by mode */ -#define IDMA_DCM_LP ((ushort)0x4000) /* low priority */ -#define IDMA_DCM_TC2 ((ushort)0x0400) /* value driven on TC[2] */ -#define IDMA_DCM_DMA_WRAP_MASK ((ushort)0x01c0) /* mask for DMA wrap */ -#define IDMA_DCM_DMA_WRAP_64 ((ushort)0x0000) /* 64-byte DMA xfer buffer */ -#define IDMA_DCM_DMA_WRAP_128 ((ushort)0x0040) /* 128-byte DMA xfer buffer */ -#define IDMA_DCM_DMA_WRAP_256 ((ushort)0x0080) /* 256-byte DMA xfer buffer */ -#define IDMA_DCM_DMA_WRAP_512 ((ushort)0x00c0) /* 512-byte DMA xfer buffer */ -#define IDMA_DCM_DMA_WRAP_1024 ((ushort)0x0100) /* 1024-byte DMA xfer buffer */ -#define IDMA_DCM_DMA_WRAP_2048 ((ushort)0x0140) /* 2048-byte DMA xfer buffer */ -#define IDMA_DCM_SINC ((ushort)0x0020) /* source inc addr */ -#define IDMA_DCM_DINC ((ushort)0x0010) /* destination inc addr */ -#define IDMA_DCM_ERM ((ushort)0x0008) /* external request mode */ -#define IDMA_DCM_DT ((ushort)0x0004) /* DONE treatment */ -#define IDMA_DCM_SD_MASK ((ushort)0x0003) /* mask for SD bit field */ -#define IDMA_DCM_SD_MEM2MEM ((ushort)0x0000) /* memory-to-memory xfer */ -#define IDMA_DCM_SD_PER2MEM ((ushort)0x0002) /* peripheral-to-memory xfer */ -#define IDMA_DCM_SD_MEM2PER ((ushort)0x0001) /* memory-to-peripheral xfer */ - -/* IDMA Buffer Descriptors -*/ -typedef struct idma_bd { - uint flags; - uint len; /* data length */ - uint src; /* source data buffer pointer */ - uint dst; /* destination data buffer pointer */ -} idma_bd_t; - -/* IDMA buffer descriptor flag bit fields -*/ -#define IDMA_BD_V ((uint)0x80000000) /* valid */ -#define IDMA_BD_W ((uint)0x20000000) /* wrap */ -#define IDMA_BD_I ((uint)0x10000000) /* interrupt */ -#define IDMA_BD_L ((uint)0x08000000) /* last */ -#define IDMA_BD_CM ((uint)0x02000000) /* continuous mode */ -#define IDMA_BD_SDN ((uint)0x00400000) /* source done */ -#define IDMA_BD_DDN ((uint)0x00200000) /* destination done */ -#define IDMA_BD_DGBL ((uint)0x00100000) /* destination global */ -#define IDMA_BD_DBO_LE ((uint)0x00040000) /* little-end dest byte order */ -#define IDMA_BD_DBO_BE ((uint)0x00080000) /* big-end dest byte order */ -#define IDMA_BD_DDTB ((uint)0x00010000) /* destination data bus */ -#define IDMA_BD_SGBL ((uint)0x00002000) /* source global */ -#define IDMA_BD_SBO_LE ((uint)0x00000800) /* little-end src byte order */ -#define IDMA_BD_SBO_BE ((uint)0x00001000) /* big-end src byte order */ -#define IDMA_BD_SDTB ((uint)0x00000200) /* source data bus */ - -/* per-channel IDMA registers -*/ -typedef struct im_idma { - u_char idsr; /* IDMAn event status register */ - u_char res0[3]; - u_char idmr; /* IDMAn event mask register */ - u_char res1[3]; -} im_idma_t; - -/* IDMA event register bit fields -*/ -#define IDMA_EVENT_SC ((unsigned char)0x08) /* stop completed */ -#define IDMA_EVENT_OB ((unsigned char)0x04) /* out of buffers */ -#define IDMA_EVENT_EDN ((unsigned char)0x02) /* external DONE asserted */ -#define IDMA_EVENT_BC ((unsigned char)0x01) /* buffer descriptor complete */ - -/* RISC Controller Configuration Register (RCCR) bit fields -*/ -#define RCCR_TIME ((uint)0x80000000) /* timer enable */ -#define RCCR_TIMEP_MASK ((uint)0x3f000000) /* mask for timer period bit field */ -#define RCCR_DR0M ((uint)0x00800000) /* IDMA0 request mode */ -#define RCCR_DR1M ((uint)0x00400000) /* IDMA1 request mode */ -#define RCCR_DR2M ((uint)0x00000080) /* IDMA2 request mode */ -#define RCCR_DR3M ((uint)0x00000040) /* IDMA3 request mode */ -#define RCCR_DR0QP_MASK ((uint)0x00300000) /* mask for IDMA0 req priority */ -#define RCCR_DR0QP_HIGH ((uint)0x00000000) /* IDMA0 has high req priority */ -#define RCCR_DR0QP_MED ((uint)0x00100000) /* IDMA0 has medium req priority */ -#define RCCR_DR0QP_LOW ((uint)0x00200000) /* IDMA0 has low req priority */ -#define RCCR_DR1QP_MASK ((uint)0x00030000) /* mask for IDMA1 req priority */ -#define RCCR_DR1QP_HIGH ((uint)0x00000000) /* IDMA1 has high req priority */ -#define RCCR_DR1QP_MED ((uint)0x00010000) /* IDMA1 has medium req priority */ -#define RCCR_DR1QP_LOW ((uint)0x00020000) /* IDMA1 has low req priority */ -#define RCCR_DR2QP_MASK ((uint)0x00000030) /* mask for IDMA2 req priority */ -#define RCCR_DR2QP_HIGH ((uint)0x00000000) /* IDMA2 has high req priority */ -#define RCCR_DR2QP_MED ((uint)0x00000010) /* IDMA2 has medium req priority */ -#define RCCR_DR2QP_LOW ((uint)0x00000020) /* IDMA2 has low req priority */ -#define RCCR_DR3QP_MASK ((uint)0x00000003) /* mask for IDMA3 req priority */ -#define RCCR_DR3QP_HIGH ((uint)0x00000000) /* IDMA3 has high req priority */ -#define RCCR_DR3QP_MED ((uint)0x00000001) /* IDMA3 has medium req priority */ -#define RCCR_DR3QP_LOW ((uint)0x00000002) /* IDMA3 has low req priority */ -#define RCCR_EIE ((uint)0x00080000) /* external interrupt enable */ -#define RCCR_SCD ((uint)0x00040000) /* scheduler configuration */ -#define RCCR_ERAM_MASK ((uint)0x0000e000) /* mask for enable RAM microcode */ -#define RCCR_ERAM_0KB ((uint)0x00000000) /* use 0KB of dpram for microcode */ -#define RCCR_ERAM_2KB ((uint)0x00002000) /* use 2KB of dpram for microcode */ -#define RCCR_ERAM_4KB ((uint)0x00004000) /* use 4KB of dpram for microcode */ -#define RCCR_ERAM_6KB ((uint)0x00006000) /* use 6KB of dpram for microcode */ -#define RCCR_ERAM_8KB ((uint)0x00008000) /* use 8KB of dpram for microcode */ -#define RCCR_ERAM_10KB ((uint)0x0000a000) /* use 10KB of dpram for microcode */ -#define RCCR_ERAM_12KB ((uint)0x0000c000) /* use 12KB of dpram for microcode */ -#define RCCR_EDM0 ((uint)0x00000800) /* DREQ0 edge detect mode */ -#define RCCR_EDM1 ((uint)0x00000400) /* DREQ1 edge detect mode */ -#define RCCR_EDM2 ((uint)0x00000200) /* DREQ2 edge detect mode */ -#define RCCR_EDM3 ((uint)0x00000100) /* DREQ3 edge detect mode */ -#define RCCR_DEM01 ((uint)0x00000008) /* DONE0/DONE1 edge detect mode */ -#define RCCR_DEM23 ((uint)0x00000004) /* DONE2/DONE3 edge detect mode */ - -/*----------------------------------------------------------------------- - * CMXFCR - CMX FCC Clock Route Register - */ -#define CMXFCR_FC1 0x40000000 /* FCC1 connection */ -#define CMXFCR_RF1CS_MSK 0x38000000 /* Receive FCC1 Clock Source Mask */ -#define CMXFCR_TF1CS_MSK 0x07000000 /* Transmit FCC1 Clock Source Mask */ -#define CMXFCR_FC2 0x00400000 /* FCC2 connection */ -#define CMXFCR_RF2CS_MSK 0x00380000 /* Receive FCC2 Clock Source Mask */ -#define CMXFCR_TF2CS_MSK 0x00070000 /* Transmit FCC2 Clock Source Mask */ -#define CMXFCR_FC3 0x00004000 /* FCC3 connection */ -#define CMXFCR_RF3CS_MSK 0x00003800 /* Receive FCC3 Clock Source Mask */ -#define CMXFCR_TF3CS_MSK 0x00000700 /* Transmit FCC3 Clock Source Mask */ - -#define CMXFCR_RF1CS_BRG5 0x00000000 /* Receive FCC1 Clock Source is BRG5 */ -#define CMXFCR_RF1CS_BRG6 0x08000000 /* Receive FCC1 Clock Source is BRG6 */ -#define CMXFCR_RF1CS_BRG7 0x10000000 /* Receive FCC1 Clock Source is BRG7 */ -#define CMXFCR_RF1CS_BRG8 0x18000000 /* Receive FCC1 Clock Source is BRG8 */ -#define CMXFCR_RF1CS_CLK9 0x20000000 /* Receive FCC1 Clock Source is CLK9 */ -#define CMXFCR_RF1CS_CLK10 0x28000000 /* Receive FCC1 Clock Source is CLK10 */ -#define CMXFCR_RF1CS_CLK11 0x30000000 /* Receive FCC1 Clock Source is CLK11 */ -#define CMXFCR_RF1CS_CLK12 0x38000000 /* Receive FCC1 Clock Source is CLK12 */ - -#define CMXFCR_TF1CS_BRG5 0x00000000 /* Transmit FCC1 Clock Source is BRG5 */ -#define CMXFCR_TF1CS_BRG6 0x01000000 /* Transmit FCC1 Clock Source is BRG6 */ -#define CMXFCR_TF1CS_BRG7 0x02000000 /* Transmit FCC1 Clock Source is BRG7 */ -#define CMXFCR_TF1CS_BRG8 0x03000000 /* Transmit FCC1 Clock Source is BRG8 */ -#define CMXFCR_TF1CS_CLK9 0x04000000 /* Transmit FCC1 Clock Source is CLK9 */ -#define CMXFCR_TF1CS_CLK10 0x05000000 /* Transmit FCC1 Clock Source is CLK10 */ -#define CMXFCR_TF1CS_CLK11 0x06000000 /* Transmit FCC1 Clock Source is CLK11 */ -#define CMXFCR_TF1CS_CLK12 0x07000000 /* Transmit FCC1 Clock Source is CLK12 */ - -#define CMXFCR_RF2CS_BRG5 0x00000000 /* Receive FCC2 Clock Source is BRG5 */ -#define CMXFCR_RF2CS_BRG6 0x00080000 /* Receive FCC2 Clock Source is BRG6 */ -#define CMXFCR_RF2CS_BRG7 0x00100000 /* Receive FCC2 Clock Source is BRG7 */ -#define CMXFCR_RF2CS_BRG8 0x00180000 /* Receive FCC2 Clock Source is BRG8 */ -#define CMXFCR_RF2CS_CLK13 0x00200000 /* Receive FCC2 Clock Source is CLK13 */ -#define CMXFCR_RF2CS_CLK14 0x00280000 /* Receive FCC2 Clock Source is CLK14 */ -#define CMXFCR_RF2CS_CLK15 0x00300000 /* Receive FCC2 Clock Source is CLK15 */ -#define CMXFCR_RF2CS_CLK16 0x00380000 /* Receive FCC2 Clock Source is CLK16 */ - -#define CMXFCR_TF2CS_BRG5 0x00000000 /* Transmit FCC2 Clock Source is BRG5 */ -#define CMXFCR_TF2CS_BRG6 0x00010000 /* Transmit FCC2 Clock Source is BRG6 */ -#define CMXFCR_TF2CS_BRG7 0x00020000 /* Transmit FCC2 Clock Source is BRG7 */ -#define CMXFCR_TF2CS_BRG8 0x00030000 /* Transmit FCC2 Clock Source is BRG8 */ -#define CMXFCR_TF2CS_CLK13 0x00040000 /* Transmit FCC2 Clock Source is CLK13 */ -#define CMXFCR_TF2CS_CLK14 0x00050000 /* Transmit FCC2 Clock Source is CLK14 */ -#define CMXFCR_TF2CS_CLK15 0x00060000 /* Transmit FCC2 Clock Source is CLK15 */ -#define CMXFCR_TF2CS_CLK16 0x00070000 /* Transmit FCC2 Clock Source is CLK16 */ - -#define CMXFCR_RF3CS_BRG5 0x00000000 /* Receive FCC3 Clock Source is BRG5 */ -#define CMXFCR_RF3CS_BRG6 0x00000800 /* Receive FCC3 Clock Source is BRG6 */ -#define CMXFCR_RF3CS_BRG7 0x00001000 /* Receive FCC3 Clock Source is BRG7 */ -#define CMXFCR_RF3CS_BRG8 0x00001800 /* Receive FCC3 Clock Source is BRG8 */ -#define CMXFCR_RF3CS_CLK13 0x00002000 /* Receive FCC3 Clock Source is CLK13 */ -#define CMXFCR_RF3CS_CLK14 0x00002800 /* Receive FCC3 Clock Source is CLK14 */ -#define CMXFCR_RF3CS_CLK15 0x00003000 /* Receive FCC3 Clock Source is CLK15 */ -#define CMXFCR_RF3CS_CLK16 0x00003800 /* Receive FCC3 Clock Source is CLK16 */ - -#define CMXFCR_TF3CS_BRG5 0x00000000 /* Transmit FCC3 Clock Source is BRG5 */ -#define CMXFCR_TF3CS_BRG6 0x00000100 /* Transmit FCC3 Clock Source is BRG6 */ -#define CMXFCR_TF3CS_BRG7 0x00000200 /* Transmit FCC3 Clock Source is BRG7 */ -#define CMXFCR_TF3CS_BRG8 0x00000300 /* Transmit FCC3 Clock Source is BRG8 */ -#define CMXFCR_TF3CS_CLK13 0x00000400 /* Transmit FCC3 Clock Source is CLK13 */ -#define CMXFCR_TF3CS_CLK14 0x00000500 /* Transmit FCC3 Clock Source is CLK14 */ -#define CMXFCR_TF3CS_CLK15 0x00000600 /* Transmit FCC3 Clock Source is CLK15 */ -#define CMXFCR_TF3CS_CLK16 0x00000700 /* Transmit FCC3 Clock Source is CLK16 */ - -/*----------------------------------------------------------------------- - * CMXSCR - CMX SCC Clock Route Register - */ -#define CMXSCR_GR1 0x80000000 /* Grant Support of SCC1 */ -#define CMXSCR_SC1 0x40000000 /* SCC1 connection */ -#define CMXSCR_RS1CS_MSK 0x38000000 /* Receive SCC1 Clock Source Mask */ -#define CMXSCR_TS1CS_MSK 0x07000000 /* Transmit SCC1 Clock Source Mask */ -#define CMXSCR_GR2 0x00800000 /* Grant Support of SCC2 */ -#define CMXSCR_SC2 0x00400000 /* SCC2 connection */ -#define CMXSCR_RS2CS_MSK 0x00380000 /* Receive SCC2 Clock Source Mask */ -#define CMXSCR_TS2CS_MSK 0x00070000 /* Transmit SCC2 Clock Source Mask */ -#define CMXSCR_GR3 0x00008000 /* Grant Support of SCC3 */ -#define CMXSCR_SC3 0x00004000 /* SCC3 connection */ -#define CMXSCR_RS3CS_MSK 0x00003800 /* Receive SCC3 Clock Source Mask */ -#define CMXSCR_TS3CS_MSK 0x00000700 /* Transmit SCC3 Clock Source Mask */ -#define CMXSCR_GR4 0x00000080 /* Grant Support of SCC4 */ -#define CMXSCR_SC4 0x00000040 /* SCC4 connection */ -#define CMXSCR_RS4CS_MSK 0x00000038 /* Receive SCC4 Clock Source Mask */ -#define CMXSCR_TS4CS_MSK 0x00000007 /* Transmit SCC4 Clock Source Mask */ - -#define CMXSCR_RS1CS_BRG1 0x00000000 /* SCC1 Rx Clock Source is BRG1 */ -#define CMXSCR_RS1CS_BRG2 0x08000000 /* SCC1 Rx Clock Source is BRG2 */ -#define CMXSCR_RS1CS_BRG3 0x10000000 /* SCC1 Rx Clock Source is BRG3 */ -#define CMXSCR_RS1CS_BRG4 0x18000000 /* SCC1 Rx Clock Source is BRG4 */ -#define CMXSCR_RS1CS_CLK11 0x20000000 /* SCC1 Rx Clock Source is CLK11 */ -#define CMXSCR_RS1CS_CLK12 0x28000000 /* SCC1 Rx Clock Source is CLK12 */ -#define CMXSCR_RS1CS_CLK3 0x30000000 /* SCC1 Rx Clock Source is CLK3 */ -#define CMXSCR_RS1CS_CLK4 0x38000000 /* SCC1 Rx Clock Source is CLK4 */ - -#define CMXSCR_TS1CS_BRG1 0x00000000 /* SCC1 Tx Clock Source is BRG1 */ -#define CMXSCR_TS1CS_BRG2 0x01000000 /* SCC1 Tx Clock Source is BRG2 */ -#define CMXSCR_TS1CS_BRG3 0x02000000 /* SCC1 Tx Clock Source is BRG3 */ -#define CMXSCR_TS1CS_BRG4 0x03000000 /* SCC1 Tx Clock Source is BRG4 */ -#define CMXSCR_TS1CS_CLK11 0x04000000 /* SCC1 Tx Clock Source is CLK11 */ -#define CMXSCR_TS1CS_CLK12 0x05000000 /* SCC1 Tx Clock Source is CLK12 */ -#define CMXSCR_TS1CS_CLK3 0x06000000 /* SCC1 Tx Clock Source is CLK3 */ -#define CMXSCR_TS1CS_CLK4 0x07000000 /* SCC1 Tx Clock Source is CLK4 */ - -#define CMXSCR_RS2CS_BRG1 0x00000000 /* SCC2 Rx Clock Source is BRG1 */ -#define CMXSCR_RS2CS_BRG2 0x00080000 /* SCC2 Rx Clock Source is BRG2 */ -#define CMXSCR_RS2CS_BRG3 0x00100000 /* SCC2 Rx Clock Source is BRG3 */ -#define CMXSCR_RS2CS_BRG4 0x00180000 /* SCC2 Rx Clock Source is BRG4 */ -#define CMXSCR_RS2CS_CLK11 0x00200000 /* SCC2 Rx Clock Source is CLK11 */ -#define CMXSCR_RS2CS_CLK12 0x00280000 /* SCC2 Rx Clock Source is CLK12 */ -#define CMXSCR_RS2CS_CLK3 0x00300000 /* SCC2 Rx Clock Source is CLK3 */ -#define CMXSCR_RS2CS_CLK4 0x00380000 /* SCC2 Rx Clock Source is CLK4 */ - -#define CMXSCR_TS2CS_BRG1 0x00000000 /* SCC2 Tx Clock Source is BRG1 */ -#define CMXSCR_TS2CS_BRG2 0x00010000 /* SCC2 Tx Clock Source is BRG2 */ -#define CMXSCR_TS2CS_BRG3 0x00020000 /* SCC2 Tx Clock Source is BRG3 */ -#define CMXSCR_TS2CS_BRG4 0x00030000 /* SCC2 Tx Clock Source is BRG4 */ -#define CMXSCR_TS2CS_CLK11 0x00040000 /* SCC2 Tx Clock Source is CLK11 */ -#define CMXSCR_TS2CS_CLK12 0x00050000 /* SCC2 Tx Clock Source is CLK12 */ -#define CMXSCR_TS2CS_CLK3 0x00060000 /* SCC2 Tx Clock Source is CLK3 */ -#define CMXSCR_TS2CS_CLK4 0x00070000 /* SCC2 Tx Clock Source is CLK4 */ - -#define CMXSCR_RS3CS_BRG1 0x00000000 /* SCC3 Rx Clock Source is BRG1 */ -#define CMXSCR_RS3CS_BRG2 0x00000800 /* SCC3 Rx Clock Source is BRG2 */ -#define CMXSCR_RS3CS_BRG3 0x00001000 /* SCC3 Rx Clock Source is BRG3 */ -#define CMXSCR_RS3CS_BRG4 0x00001800 /* SCC3 Rx Clock Source is BRG4 */ -#define CMXSCR_RS3CS_CLK5 0x00002000 /* SCC3 Rx Clock Source is CLK5 */ -#define CMXSCR_RS3CS_CLK6 0x00002800 /* SCC3 Rx Clock Source is CLK6 */ -#define CMXSCR_RS3CS_CLK7 0x00003000 /* SCC3 Rx Clock Source is CLK7 */ -#define CMXSCR_RS3CS_CLK8 0x00003800 /* SCC3 Rx Clock Source is CLK8 */ - -#define CMXSCR_TS3CS_BRG1 0x00000000 /* SCC3 Tx Clock Source is BRG1 */ -#define CMXSCR_TS3CS_BRG2 0x00000100 /* SCC3 Tx Clock Source is BRG2 */ -#define CMXSCR_TS3CS_BRG3 0x00000200 /* SCC3 Tx Clock Source is BRG3 */ -#define CMXSCR_TS3CS_BRG4 0x00000300 /* SCC3 Tx Clock Source is BRG4 */ -#define CMXSCR_TS3CS_CLK5 0x00000400 /* SCC3 Tx Clock Source is CLK5 */ -#define CMXSCR_TS3CS_CLK6 0x00000500 /* SCC3 Tx Clock Source is CLK6 */ -#define CMXSCR_TS3CS_CLK7 0x00000600 /* SCC3 Tx Clock Source is CLK7 */ -#define CMXSCR_TS3CS_CLK8 0x00000700 /* SCC3 Tx Clock Source is CLK8 */ - -#define CMXSCR_RS4CS_BRG1 0x00000000 /* SCC4 Rx Clock Source is BRG1 */ -#define CMXSCR_RS4CS_BRG2 0x00000008 /* SCC4 Rx Clock Source is BRG2 */ -#define CMXSCR_RS4CS_BRG3 0x00000010 /* SCC4 Rx Clock Source is BRG3 */ -#define CMXSCR_RS4CS_BRG4 0x00000018 /* SCC4 Rx Clock Source is BRG4 */ -#define CMXSCR_RS4CS_CLK5 0x00000020 /* SCC4 Rx Clock Source is CLK5 */ -#define CMXSCR_RS4CS_CLK6 0x00000028 /* SCC4 Rx Clock Source is CLK6 */ -#define CMXSCR_RS4CS_CLK7 0x00000030 /* SCC4 Rx Clock Source is CLK7 */ -#define CMXSCR_RS4CS_CLK8 0x00000038 /* SCC4 Rx Clock Source is CLK8 */ - -#define CMXSCR_TS4CS_BRG1 0x00000000 /* SCC4 Tx Clock Source is BRG1 */ -#define CMXSCR_TS4CS_BRG2 0x00000001 /* SCC4 Tx Clock Source is BRG2 */ -#define CMXSCR_TS4CS_BRG3 0x00000002 /* SCC4 Tx Clock Source is BRG3 */ -#define CMXSCR_TS4CS_BRG4 0x00000003 /* SCC4 Tx Clock Source is BRG4 */ -#define CMXSCR_TS4CS_CLK5 0x00000004 /* SCC4 Tx Clock Source is CLK5 */ -#define CMXSCR_TS4CS_CLK6 0x00000005 /* SCC4 Tx Clock Source is CLK6 */ -#define CMXSCR_TS4CS_CLK7 0x00000006 /* SCC4 Tx Clock Source is CLK7 */ -#define CMXSCR_TS4CS_CLK8 0x00000007 /* SCC4 Tx Clock Source is CLK8 */ - -/*----------------------------------------------------------------------- - * SIUMCR - SIU Module Configuration Register 4-31 - */ -#define SIUMCR_BBD 0x80000000 /* Bus Busy Disable */ -#define SIUMCR_ESE 0x40000000 /* External Snoop Enable */ -#define SIUMCR_PBSE 0x20000000 /* Parity Byte Select Enable */ -#define SIUMCR_CDIS 0x10000000 /* Core Disable */ -#define SIUMCR_DPPC00 0x00000000 /* Data Parity Pins Configuration*/ -#define SIUMCR_DPPC01 0x04000000 /* - " - */ -#define SIUMCR_DPPC10 0x08000000 /* - " - */ -#define SIUMCR_DPPC11 0x0c000000 /* - " - */ -#define SIUMCR_L2CPC00 0x00000000 /* L2 Cache Pins Configuration */ -#define SIUMCR_L2CPC01 0x01000000 /* - " - */ -#define SIUMCR_L2CPC10 0x02000000 /* - " - */ -#define SIUMCR_L2CPC11 0x03000000 /* - " - */ -#define SIUMCR_LBPC00 0x00000000 /* Local Bus Pins Configuration */ -#define SIUMCR_LBPC01 0x00400000 /* - " - */ -#define SIUMCR_LBPC10 0x00800000 /* - " - */ -#define SIUMCR_LBPC11 0x00c00000 /* - " - */ -#define SIUMCR_APPC00 0x00000000 /* Address Parity Pins Configuration*/ -#define SIUMCR_APPC01 0x00100000 /* - " - */ -#define SIUMCR_APPC10 0x00200000 /* - " - */ -#define SIUMCR_APPC11 0x00300000 /* - " - */ -#define SIUMCR_CS10PC00 0x00000000 /* CS10 Pin Configuration */ -#define SIUMCR_CS10PC01 0x00040000 /* - " - */ -#define SIUMCR_CS10PC10 0x00080000 /* - " - */ -#define SIUMCR_CS10PC11 0x000c0000 /* - " - */ -#define SIUMCR_BCTLC00 0x00000000 /* Buffer Control Configuration */ -#define SIUMCR_BCTLC01 0x00010000 /* - " - */ -#define SIUMCR_BCTLC10 0x00020000 /* - " - */ -#define SIUMCR_BCTLC11 0x00030000 /* - " - */ -#define SIUMCR_MMR00 0x00000000 /* Mask Masters Requests */ -#define SIUMCR_MMR01 0x00004000 /* - " - */ -#define SIUMCR_MMR10 0x00008000 /* - " - */ -#define SIUMCR_MMR11 0x0000c000 /* - " - */ -#define SIUMCR_LPBSE 0x00002000 /* LocalBus Parity Byte Select Enable*/ - -/*----------------------------------------------------------------------- - * SCCR - System Clock Control Register 9-8 -*/ -#define SCCR_PCI_MODE 0x00000100 /* PCI Mode */ -#define SCCR_PCI_MODCK 0x00000080 /* Value of PCI_MODCK pin */ -#define SCCR_PCIDF_MSK 0x00000078 /* PCI division factor */ -#define SCCR_PCIDF_SHIFT 3 - -#ifndef CPM_IMMR_OFFSET -#define CPM_IMMR_OFFSET 0x101a8 -#endif - -#define FCC_PSMR_RMII ((uint)0x00020000) /* Use RMII interface */ - -/* FCC iop & clock configuration. BSP code is responsible to define Fx_RXCLK & Fx_TXCLK - * in order to use clock-computing stuff below for the FCC x - */ - -/* Automatically generates register configurations */ -#define PC_CLK(x) ((uint)(1<<(x-1))) /* FCC CLK I/O ports */ - -#define CMXFCR_RF1CS(x) ((uint)((x-5)<<27)) /* FCC1 Receive Clock Source */ -#define CMXFCR_TF1CS(x) ((uint)((x-5)<<24)) /* FCC1 Transmit Clock Source */ -#define CMXFCR_RF2CS(x) ((uint)((x-9)<<19)) /* FCC2 Receive Clock Source */ -#define CMXFCR_TF2CS(x) ((uint)((x-9)<<16)) /* FCC2 Transmit Clock Source */ -#define CMXFCR_RF3CS(x) ((uint)((x-9)<<11)) /* FCC3 Receive Clock Source */ -#define CMXFCR_TF3CS(x) ((uint)((x-9)<<8)) /* FCC3 Transmit Clock Source */ - -#define PC_F1RXCLK PC_CLK(F1_RXCLK) -#define PC_F1TXCLK PC_CLK(F1_TXCLK) -#define CMX1_CLK_ROUTE (CMXFCR_RF1CS(F1_RXCLK) | CMXFCR_TF1CS(F1_TXCLK)) -#define CMX1_CLK_MASK ((uint)0xff000000) - -#define PC_F2RXCLK PC_CLK(F2_RXCLK) -#define PC_F2TXCLK PC_CLK(F2_TXCLK) -#define CMX2_CLK_ROUTE (CMXFCR_RF2CS(F2_RXCLK) | CMXFCR_TF2CS(F2_TXCLK)) -#define CMX2_CLK_MASK ((uint)0x00ff0000) - -#define PC_F3RXCLK PC_CLK(F3_RXCLK) -#define PC_F3TXCLK PC_CLK(F3_TXCLK) -#define CMX3_CLK_ROUTE (CMXFCR_RF3CS(F3_RXCLK) | CMXFCR_TF3CS(F3_TXCLK)) -#define CMX3_CLK_MASK ((uint)0x0000ff00) - -#define CPMUX_CLK_MASK (CMX3_CLK_MASK | CMX2_CLK_MASK) -#define CPMUX_CLK_ROUTE (CMX3_CLK_ROUTE | CMX2_CLK_ROUTE) - -#define CLK_TRX (PC_F3TXCLK | PC_F3RXCLK | PC_F2TXCLK | PC_F2RXCLK) - -/* I/O Pin assignment for FCC1. I don't yet know the best way to do this, - * but there is little variation among the choices. - */ -#define PA1_COL 0x00000001U -#define PA1_CRS 0x00000002U -#define PA1_TXER 0x00000004U -#define PA1_TXEN 0x00000008U -#define PA1_RXDV 0x00000010U -#define PA1_RXER 0x00000020U -#define PA1_TXDAT 0x00003c00U -#define PA1_RXDAT 0x0003c000U -#define PA1_PSORA0 (PA1_RXDAT | PA1_TXDAT) -#define PA1_PSORA1 (PA1_COL | PA1_CRS | PA1_TXER | PA1_TXEN | \ - PA1_RXDV | PA1_RXER) -#define PA1_DIRA0 (PA1_RXDAT | PA1_CRS | PA1_COL | PA1_RXER | PA1_RXDV) -#define PA1_DIRA1 (PA1_TXDAT | PA1_TXEN | PA1_TXER) - - -/* I/O Pin assignment for FCC2. I don't yet know the best way to do this, - * but there is little variation among the choices. - */ -#define PB2_TXER 0x00000001U -#define PB2_RXDV 0x00000002U -#define PB2_TXEN 0x00000004U -#define PB2_RXER 0x00000008U -#define PB2_COL 0x00000010U -#define PB2_CRS 0x00000020U -#define PB2_TXDAT 0x000003c0U -#define PB2_RXDAT 0x00003c00U -#define PB2_PSORB0 (PB2_RXDAT | PB2_TXDAT | PB2_CRS | PB2_COL | \ - PB2_RXER | PB2_RXDV | PB2_TXER) -#define PB2_PSORB1 (PB2_TXEN) -#define PB2_DIRB0 (PB2_RXDAT | PB2_CRS | PB2_COL | PB2_RXER | PB2_RXDV) -#define PB2_DIRB1 (PB2_TXDAT | PB2_TXEN | PB2_TXER) - - -/* I/O Pin assignment for FCC3. I don't yet know the best way to do this, - * but there is little variation among the choices. - */ -#define PB3_RXDV 0x00004000U -#define PB3_RXER 0x00008000U -#define PB3_TXER 0x00010000U -#define PB3_TXEN 0x00020000U -#define PB3_COL 0x00040000U -#define PB3_CRS 0x00080000U -#define PB3_TXDAT 0x0f000000U -#define PC3_TXDAT 0x00000010U -#define PB3_RXDAT 0x00f00000U -#define PB3_PSORB0 (PB3_RXDAT | PB3_TXDAT | PB3_CRS | PB3_COL | \ - PB3_RXER | PB3_RXDV | PB3_TXER | PB3_TXEN) -#define PB3_PSORB1 0 -#define PB3_DIRB0 (PB3_RXDAT | PB3_CRS | PB3_COL | PB3_RXER | PB3_RXDV) -#define PB3_DIRB1 (PB3_TXDAT | PB3_TXEN | PB3_TXER) -#define PC3_DIRC1 (PC3_TXDAT) - -/* Handy macro to specify mem for FCCs*/ -#define FCC_MEM_OFFSET(x) (CPM_FCC_SPECIAL_BASE + (x*128)) -#define FCC1_MEM_OFFSET FCC_MEM_OFFSET(0) -#define FCC2_MEM_OFFSET FCC_MEM_OFFSET(1) -#define FCC3_MEM_OFFSET FCC_MEM_OFFSET(2) - -/* Clocks and GRG's */ - -enum cpm_clk_dir { - CPM_CLK_RX, - CPM_CLK_TX, - CPM_CLK_RTX -}; - -enum cpm_clk_target { - CPM_CLK_SCC1, - CPM_CLK_SCC2, - CPM_CLK_SCC3, - CPM_CLK_SCC4, - CPM_CLK_FCC1, - CPM_CLK_FCC2, - CPM_CLK_FCC3, - CPM_CLK_SMC1, - CPM_CLK_SMC2, -}; - -enum cpm_clk { - CPM_CLK_NONE = 0, - CPM_BRG1, /* Baud Rate Generator 1 */ - CPM_BRG2, /* Baud Rate Generator 2 */ - CPM_BRG3, /* Baud Rate Generator 3 */ - CPM_BRG4, /* Baud Rate Generator 4 */ - CPM_BRG5, /* Baud Rate Generator 5 */ - CPM_BRG6, /* Baud Rate Generator 6 */ - CPM_BRG7, /* Baud Rate Generator 7 */ - CPM_BRG8, /* Baud Rate Generator 8 */ - CPM_CLK1, /* Clock 1 */ - CPM_CLK2, /* Clock 2 */ - CPM_CLK3, /* Clock 3 */ - CPM_CLK4, /* Clock 4 */ - CPM_CLK5, /* Clock 5 */ - CPM_CLK6, /* Clock 6 */ - CPM_CLK7, /* Clock 7 */ - CPM_CLK8, /* Clock 8 */ - CPM_CLK9, /* Clock 9 */ - CPM_CLK10, /* Clock 10 */ - CPM_CLK11, /* Clock 11 */ - CPM_CLK12, /* Clock 12 */ - CPM_CLK13, /* Clock 13 */ - CPM_CLK14, /* Clock 14 */ - CPM_CLK15, /* Clock 15 */ - CPM_CLK16, /* Clock 16 */ - CPM_CLK17, /* Clock 17 */ - CPM_CLK18, /* Clock 18 */ - CPM_CLK19, /* Clock 19 */ - CPM_CLK20, /* Clock 20 */ - CPM_CLK_DUMMY -}; - -extern int cpm2_clk_setup(enum cpm_clk_target target, int clock, int mode); -extern int cpm2_smc_clk_setup(enum cpm_clk_target target, int clock); - -#define CPM_PIN_INPUT 0 -#define CPM_PIN_OUTPUT 1 -#define CPM_PIN_PRIMARY 0 -#define CPM_PIN_SECONDARY 2 -#define CPM_PIN_GPIO 4 -#define CPM_PIN_OPENDRAIN 8 - -void cpm2_set_pin(int port, int pin, int flags); - -#endif /* __CPM2__ */ -#endif /* __KERNEL__ */ |