diff options
Diffstat (limited to 'include/asm-sparc/hypervisor.h')
| -rw-r--r-- | include/asm-sparc/hypervisor.h | 2949 |
1 files changed, 0 insertions, 2949 deletions
diff --git a/include/asm-sparc/hypervisor.h b/include/asm-sparc/hypervisor.h deleted file mode 100644 index 109ae24ba242..000000000000 --- a/include/asm-sparc/hypervisor.h +++ /dev/null @@ -1,2949 +0,0 @@ -#ifndef _SPARC64_HYPERVISOR_H -#define _SPARC64_HYPERVISOR_H - -/* Sun4v hypervisor interfaces and defines. - * - * Hypervisor calls are made via traps to software traps number 0x80 - * and above. Registers %o0 to %o5 serve as argument, status, and - * return value registers. - * - * There are two kinds of these traps. First there are the normal - * "fast traps" which use software trap 0x80 and encode the function - * to invoke by number in register %o5. Argument and return value - * handling is as follows: - * - * ----------------------------------------------- - * | %o5 | function number | undefined | - * | %o0 | argument 0 | return status | - * | %o1 | argument 1 | return value 1 | - * | %o2 | argument 2 | return value 2 | - * | %o3 | argument 3 | return value 3 | - * | %o4 | argument 4 | return value 4 | - * ----------------------------------------------- - * - * The second type are "hyper-fast traps" which encode the function - * number in the software trap number itself. So these use trap - * numbers > 0x80. The register usage for hyper-fast traps is as - * follows: - * - * ----------------------------------------------- - * | %o0 | argument 0 | return status | - * | %o1 | argument 1 | return value 1 | - * | %o2 | argument 2 | return value 2 | - * | %o3 | argument 3 | return value 3 | - * | %o4 | argument 4 | return value 4 | - * ----------------------------------------------- - * - * Registers providing explicit arguments to the hypervisor calls - * are volatile across the call. Upon return their values are - * undefined unless explicitly specified as containing a particular - * return value by the specific call. The return status is always - * returned in register %o0, zero indicates a successful execution of - * the hypervisor call and other values indicate an error status as - * defined below. So, for example, if a hyper-fast trap takes - * arguments 0, 1, and 2, then %o0, %o1, and %o2 are volatile across - * the call and %o3, %o4, and %o5 would be preserved. - * - * If the hypervisor trap is invalid, or the fast trap function number - * is invalid, HV_EBADTRAP will be returned in %o0. Also, all 64-bits - * of the argument and return values are significant. - */ - -/* Trap numbers. */ -#define HV_FAST_TRAP 0x80 -#define HV_MMU_MAP_ADDR_TRAP 0x83 -#define HV_MMU_UNMAP_ADDR_TRAP 0x84 -#define HV_TTRACE_ADDENTRY_TRAP 0x85 -#define HV_CORE_TRAP 0xff - -/* Error codes. */ -#define HV_EOK 0 /* Successful return */ -#define HV_ENOCPU 1 /* Invalid CPU id */ -#define HV_ENORADDR 2 /* Invalid real address */ -#define HV_ENOINTR 3 /* Invalid interrupt id */ -#define HV_EBADPGSZ 4 /* Invalid pagesize encoding */ -#define HV_EBADTSB 5 /* Invalid TSB description */ -#define HV_EINVAL 6 /* Invalid argument */ -#define HV_EBADTRAP 7 /* Invalid function number */ -#define HV_EBADALIGN 8 /* Invalid address alignment */ -#define HV_EWOULDBLOCK 9 /* Cannot complete w/o blocking */ -#define HV_ENOACCESS 10 /* No access to resource */ -#define HV_EIO 11 /* I/O error */ -#define HV_ECPUERROR 12 /* CPU in error state */ -#define HV_ENOTSUPPORTED 13 /* Function not supported */ -#define HV_ENOMAP 14 /* No mapping found */ -#define HV_ETOOMANY 15 /* Too many items specified */ -#define HV_ECHANNEL 16 /* Invalid LDC channel */ -#define HV_EBUSY 17 /* Resource busy */ - -/* mach_exit() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_MACH_EXIT - * ARG0: exit code - * ERRORS: This service does not return. - * - * Stop all CPUs in the virtual domain and place them into the stopped - * state. The 64-bit exit code may be passed to a service entity as - * the domain's exit status. On systems without a service entity, the - * domain will undergo a reset, and the boot firmware will be - * reloaded. - * - * This function will never return to the guest that invokes it. - * - * Note: By convention an exit code of zero denotes a successful exit by - * the guest code. A non-zero exit code denotes a guest specific - * error indication. - * - */ -#define HV_FAST_MACH_EXIT 0x00 - -#ifndef __ASSEMBLY__ -extern void sun4v_mach_exit(unsigned long exit_code); -#endif - -/* Domain services. */ - -/* mach_desc() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_MACH_DESC - * ARG0: buffer - * ARG1: length - * RET0: status - * RET1: length - * ERRORS: HV_EBADALIGN Buffer is badly aligned - * HV_ENORADDR Buffer is to an illegal real address. - * HV_EINVAL Buffer length is too small for complete - * machine description. - * - * Copy the most current machine description into the buffer indicated - * by the real address in ARG0. The buffer provided must be 16 byte - * aligned. Upon success or HV_EINVAL, this service returns the - * actual size of the machine description in the RET1 return value. - * - * Note: A method of determining the appropriate buffer size for the - * machine description is to first call this service with a buffer - * length of 0 bytes. - */ -#define HV_FAST_MACH_DESC 0x01 - -#ifndef __ASSEMBLY__ -extern unsigned long sun4v_mach_desc(unsigned long buffer_pa, - unsigned long buf_len, - unsigned long *real_buf_len); -#endif - -/* mach_sir() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_MACH_SIR - * ERRORS: This service does not return. - * - * Perform a software initiated reset of the virtual machine domain. - * All CPUs are captured as soon as possible, all hardware devices are - * returned to the entry default state, and the domain is restarted at - * the SIR (trap type 0x04) real trap table (RTBA) entry point on one - * of the CPUs. The single CPU restarted is selected as determined by - * platform specific policy. Memory is preserved across this - * operation. - */ -#define HV_FAST_MACH_SIR 0x02 - -#ifndef __ASSEMBLY__ -extern void sun4v_mach_sir(void); -#endif - -/* mach_set_watchdog() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_MACH_SET_WATCHDOG - * ARG0: timeout in milliseconds - * RET0: status - * RET1: time remaining in milliseconds - * - * A guest uses this API to set a watchdog timer. Once the gues has set - * the timer, it must call the timer service again either to disable or - * postpone the expiration. If the timer expires before being reset or - * disabled, then the hypervisor take a platform specific action leading - * to guest termination within a bounded time period. The platform action - * may include recovery actions such as reporting the expiration to a - * Service Processor, and/or automatically restarting the gues. - * - * The 'timeout' parameter is specified in milliseconds, however the - * implementated granularity is given by the 'watchdog-resolution' - * property in the 'platform' node of the guest's machine description. - * The largest allowed timeout value is specified by the - * 'watchdog-max-timeout' property of the 'platform' node. - * - * If the 'timeout' argument is not zero, the watchdog timer is set to - * expire after a minimum of 'timeout' milliseconds. - * - * If the 'timeout' argument is zero, the watchdog timer is disabled. - * - * If the 'timeout' value exceeds the value of the 'max-watchdog-timeout' - * property, the hypervisor leaves the watchdog timer state unchanged, - * and returns a status of EINVAL. - * - * The 'time remaining' return value is valid regardless of whether the - * return status is EOK or EINVAL. A non-zero return value indicates the - * number of milliseconds that were remaining until the timer was to expire. - * If less than one millisecond remains, the return value is '1'. If the - * watchdog timer was disabled at the time of the call, the return value is - * zero. - * - * If the hypervisor cannot support the exact timeout value requested, but - * can support a larger timeout value, the hypervisor may round the actual - * timeout to a value larger than the requested timeout, consequently the - * 'time remaining' return value may be larger than the previously requested - * timeout value. - * - * Any guest OS debugger should be aware that the watchdog service may be in - * use. Consequently, it is recommended that the watchdog service is - * disabled upon debugger entry (e.g. reaching a breakpoint), and then - * re-enabled upon returning to normal execution. The API has been designed - * with this in mind, and the 'time remaining' result of the disable call may - * be used directly as the timeout argument of the re-enable call. - */ -#define HV_FAST_MACH_SET_WATCHDOG 0x05 - -#ifndef __ASSEMBLY__ -extern unsigned long sun4v_mach_set_watchdog(unsigned long timeout, - unsigned long *orig_timeout); -#endif - -/* CPU services. - * - * CPUs represent devices that can execute software threads. A single - * chip that contains multiple cores or strands is represented as - * multiple CPUs with unique CPU identifiers. CPUs are exported to - * OBP via the machine description (and to the OS via the OBP device - * tree). CPUs are always in one of three states: stopped, running, - * or error. - * - * A CPU ID is a pre-assigned 16-bit value that uniquely identifies a - * CPU within a logical domain. Operations that are to be performed - * on multiple CPUs specify them via a CPU list. A CPU list is an - * array in real memory, of which each 16-bit word is a CPU ID. CPU - * lists are passed through the API as two arguments. The first is - * the number of entries (16-bit words) in the CPU list, and the - * second is the (real address) pointer to the CPU ID list. - */ - -/* cpu_start() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_CPU_START - * ARG0: CPU ID - * ARG1: PC - * ARG2: RTBA - * ARG3: target ARG0 - * RET0: status - * ERRORS: ENOCPU Invalid CPU ID - * EINVAL Target CPU ID is not in the stopped state - * ENORADDR Invalid PC or RTBA real address - * EBADALIGN Unaligned PC or unaligned RTBA - * EWOULDBLOCK Starting resources are not available - * - * Start CPU with given CPU ID with PC in %pc and with a real trap - * base address value of RTBA. The indicated CPU must be in the - * stopped state. The supplied RTBA must be aligned on a 256 byte - * boundary. On successful completion, the specified CPU will be in - * the running state and will be supplied with "target ARG0" in %o0 - * and RTBA in %tba. - */ -#define HV_FAST_CPU_START 0x10 - -#ifndef __ASSEMBLY__ -extern unsigned long sun4v_cpu_start(unsigned long cpuid, - unsigned long pc, - unsigned long rtba, - unsigned long arg0); -#endif - -/* cpu_stop() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_CPU_STOP - * ARG0: CPU ID - * RET0: status - * ERRORS: ENOCPU Invalid CPU ID - * EINVAL Target CPU ID is the current cpu - * EINVAL Target CPU ID is not in the running state - * EWOULDBLOCK Stopping resources are not available - * ENOTSUPPORTED Not supported on this platform - * - * The specified CPU is stopped. The indicated CPU must be in the - * running state. On completion, it will be in the stopped state. It - * is not legal to stop the current CPU. - * - * Note: As this service cannot be used to stop the current cpu, this service - * may not be used to stop the last running CPU in a domain. To stop - * and exit a running domain, a guest must use the mach_exit() service. - */ -#define HV_FAST_CPU_STOP 0x11 - -#ifndef __ASSEMBLY__ -extern unsigned long sun4v_cpu_stop(unsigned long cpuid); -#endif - -/* cpu_yield() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_CPU_YIELD - * RET0: status - * ERRORS: No possible error. - * - * Suspend execution on the current CPU. Execution will resume when - * an interrupt (device, %stick_compare, or cross-call) is targeted to - * the CPU. On some CPUs, this API may be used by the hypervisor to - * save power by disabling hardware strands. - */ -#define HV_FAST_CPU_YIELD 0x12 - -#ifndef __ASSEMBLY__ -extern unsigned long sun4v_cpu_yield(void); -#endif - -/* cpu_qconf() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_CPU_QCONF - * ARG0: queue - * ARG1: base real address - * ARG2: number of entries - * RET0: status - * ERRORS: ENORADDR Invalid base real address - * EINVAL Invalid queue or number of entries is less - * than 2 or too large. - * EBADALIGN Base real address is not correctly aligned - * for size. - * - * Configure the given queue to be placed at the given base real - * address, with the given number of entries. The number of entries - * must be a power of 2. The base real address must be aligned - * exactly to match the queue size. Each queue entry is 64 bytes - * long, so for example a 32 entry queue must be aligned on a 2048 - * byte real address boundary. - * - * The specified queue is unconfigured if the number of entries is given - * as zero. - * - * For the current version of this API service, the argument queue is defined - * as follows: - * - * queue description - * ----- ------------------------- - * 0x3c cpu mondo queue - * 0x3d device mondo queue - * 0x3e resumable error queue - * 0x3f non-resumable error queue - * - * Note: The maximum number of entries for each queue for a specific cpu may - * be determined from the machine description. - */ -#define HV_FAST_CPU_QCONF 0x14 -#define HV_CPU_QUEUE_CPU_MONDO 0x3c -#define HV_CPU_QUEUE_DEVICE_MONDO 0x3d -#define HV_CPU_QUEUE_RES_ERROR 0x3e -#define HV_CPU_QUEUE_NONRES_ERROR 0x3f - -#ifndef __ASSEMBLY__ -extern unsigned long sun4v_cpu_qconf(unsigned long type, - unsigned long queue_paddr, - unsigned long num_queue_entries); -#endif - -/* cpu_qinfo() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_CPU_QINFO - * ARG0: queue - * RET0: status - * RET1: base real address - * RET1: number of entries - * ERRORS: EINVAL Invalid queue - * - * Return the configuration info for the given queue. The base real - * address and number of entries of the defined queue are returned. - * The queue argument values are the same as for cpu_qconf() above. - * - * If the specified queue is a valid queue number, but no queue has - * been defined, the number of entries will be set to zero and the - * base real address returned is undefined. - */ -#define HV_FAST_CPU_QINFO 0x15 - -/* cpu_mondo_send() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_CPU_MONDO_SEND - * ARG0-1: CPU list - * ARG2: data real address - * RET0: status - * ERRORS: EBADALIGN Mondo data is not 64-byte aligned or CPU list - * is not 2-byte aligned. - * ENORADDR Invalid data mondo address, or invalid cpu list - * address. - * ENOCPU Invalid cpu in CPU list - * EWOULDBLOCK Some or all of the listed CPUs did not receive - * the mondo - * ECPUERROR One or more of the listed CPUs are in error - * state, use HV_FAST_CPU_STATE to see which ones - * EINVAL CPU list includes caller's CPU ID - * - * Send a mondo interrupt to the CPUs in the given CPU list with the - * 64-bytes at the given data real address. The data must be 64-byte - * aligned. The mondo data will be delivered to the cpu_mondo queues - * of the recipient CPUs. - * - * In all cases, error or not, the CPUs in the CPU list to which the - * mondo has been successfully delivered will be indicated by having - * their entry in CPU list updated with the value 0xffff. - */ -#define HV_FAST_CPU_MONDO_SEND 0x42 - -#ifndef __ASSEMBLY__ -extern unsigned long sun4v_cpu_mondo_send(unsigned long cpu_count, unsigned long cpu_list_pa, unsigned long mondo_block_pa); -#endif - -/* cpu_myid() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_CPU_MYID - * RET0: status - * RET1: CPU ID - * ERRORS: No errors defined. - * - * Return the hypervisor ID handle for the current CPU. Use by a - * virtual CPU to discover it's own identity. - */ -#define HV_FAST_CPU_MYID 0x16 - -/* cpu_state() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_CPU_STATE - * ARG0: CPU ID - * RET0: status - * RET1: state - * ERRORS: ENOCPU Invalid CPU ID - * - * Retrieve the current state of the CPU with the given CPU ID. - */ -#define HV_FAST_CPU_STATE 0x17 -#define HV_CPU_STATE_STOPPED 0x01 -#define HV_CPU_STATE_RUNNING 0x02 -#define HV_CPU_STATE_ERROR 0x03 - -#ifndef __ASSEMBLY__ -extern long sun4v_cpu_state(unsigned long cpuid); -#endif - -/* cpu_set_rtba() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_CPU_SET_RTBA - * ARG0: RTBA - * RET0: status - * RET1: previous RTBA - * ERRORS: ENORADDR Invalid RTBA real address - * EBADALIGN RTBA is incorrectly aligned for a trap table - * - * Set the real trap base address of the local cpu to the given RTBA. - * The supplied RTBA must be aligned on a 256 byte boundary. Upon - * success the previous value of the RTBA is returned in RET1. - * - * Note: This service does not affect %tba - */ -#define HV_FAST_CPU_SET_RTBA 0x18 - -/* cpu_set_rtba() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_CPU_GET_RTBA - * RET0: status - * RET1: previous RTBA - * ERRORS: No possible error. - * - * Returns the current value of RTBA in RET1. - */ -#define HV_FAST_CPU_GET_RTBA 0x19 - -/* MMU services. - * - * Layout of a TSB description for mmu_tsb_ctx{,non}0() calls. - */ -#ifndef __ASSEMBLY__ -struct hv_tsb_descr { - unsigned short pgsz_idx; - unsigned short assoc; - unsigned int num_ttes; /* in TTEs */ - unsigned int ctx_idx; - unsigned int pgsz_mask; - unsigned long tsb_base; - unsigned long resv; -}; -#endif -#define HV_TSB_DESCR_PGSZ_IDX_OFFSET 0x00 -#define HV_TSB_DESCR_ASSOC_OFFSET 0x02 -#define HV_TSB_DESCR_NUM_TTES_OFFSET 0x04 -#define HV_TSB_DESCR_CTX_IDX_OFFSET 0x08 -#define HV_TSB_DESCR_PGSZ_MASK_OFFSET 0x0c -#define HV_TSB_DESCR_TSB_BASE_OFFSET 0x10 -#define HV_TSB_DESCR_RESV_OFFSET 0x18 - -/* Page size bitmask. */ -#define HV_PGSZ_MASK_8K (1 << 0) -#define HV_PGSZ_MASK_64K (1 << 1) -#define HV_PGSZ_MASK_512K (1 << 2) -#define HV_PGSZ_MASK_4MB (1 << 3) -#define HV_PGSZ_MASK_32MB (1 << 4) -#define HV_PGSZ_MASK_256MB (1 << 5) -#define HV_PGSZ_MASK_2GB (1 << 6) -#define HV_PGSZ_MASK_16GB (1 << 7) - -/* Page size index. The value given in the TSB descriptor must correspond - * to the smallest page size specified in the pgsz_mask page size bitmask. - */ -#define HV_PGSZ_IDX_8K 0 -#define HV_PGSZ_IDX_64K 1 -#define HV_PGSZ_IDX_512K 2 -#define HV_PGSZ_IDX_4MB 3 -#define HV_PGSZ_IDX_32MB 4 -#define HV_PGSZ_IDX_256MB 5 -#define HV_PGSZ_IDX_2GB 6 -#define HV_PGSZ_IDX_16GB 7 - -/* MMU fault status area. - * - * MMU related faults have their status and fault address information - * placed into a memory region made available by privileged code. Each - * virtual processor must make a mmu_fault_area_conf() call to tell the - * hypervisor where that processor's fault status should be stored. - * - * The fault status block is a multiple of 64-bytes and must be aligned - * on a 64-byte boundary. - */ -#ifndef __ASSEMBLY__ -struct hv_fault_status { - unsigned long i_fault_type; - unsigned long i_fault_addr; - unsigned long i_fault_ctx; - unsigned long i_reserved[5]; - unsigned long d_fault_type; - unsigned long d_fault_addr; - unsigned long d_fault_ctx; - unsigned long d_reserved[5]; -}; -#endif -#define HV_FAULT_I_TYPE_OFFSET 0x00 -#define HV_FAULT_I_ADDR_OFFSET 0x08 -#define HV_FAULT_I_CTX_OFFSET 0x10 -#define HV_FAULT_D_TYPE_OFFSET 0x40 -#define HV_FAULT_D_ADDR_OFFSET 0x48 -#define HV_FAULT_D_CTX_OFFSET 0x50 - -#define HV_FAULT_TYPE_FAST_MISS 1 -#define HV_FAULT_TYPE_FAST_PROT 2 -#define HV_FAULT_TYPE_MMU_MISS 3 -#define HV_FAULT_TYPE_INV_RA 4 -#define HV_FAULT_TYPE_PRIV_VIOL 5 -#define HV_FAULT_TYPE_PROT_VIOL 6 -#define HV_FAULT_TYPE_NFO 7 -#define HV_FAULT_TYPE_NFO_SEFF 8 -#define HV_FAULT_TYPE_INV_VA 9 -#define HV_FAULT_TYPE_INV_ASI 10 -#define HV_FAULT_TYPE_NC_ATOMIC 11 -#define HV_FAULT_TYPE_PRIV_ACT 12 -#define HV_FAULT_TYPE_RESV1 13 -#define HV_FAULT_TYPE_UNALIGNED 14 -#define HV_FAULT_TYPE_INV_PGSZ 15 -/* Values 16 --> -2 are reserved. */ -#define HV_FAULT_TYPE_MULTIPLE -1 - -/* Flags argument for mmu_{map,unmap}_addr(), mmu_demap_{page,context,all}(), - * and mmu_{map,unmap}_perm_addr(). - */ -#define HV_MMU_DMMU 0x01 -#define HV_MMU_IMMU 0x02 -#define HV_MMU_ALL (HV_MMU_DMMU | HV_MMU_IMMU) - -/* mmu_map_addr() - * TRAP: HV_MMU_MAP_ADDR_TRAP - * ARG0: virtual address - * ARG1: mmu context - * ARG2: TTE - * ARG3: flags (HV_MMU_{IMMU,DMMU}) - * ERRORS: EINVAL Invalid virtual address, mmu context, or flags - * EBADPGSZ Invalid page size value - * ENORADDR Invalid real address in TTE - * - * Create a non-permanent mapping using the given TTE, virtual - * address, and mmu context. The flags argument determines which - * (data, or instruction, or both) TLB the mapping gets loaded into. - * - * The behavior is undefined if the valid bit is clear in the TTE. - * - * Note: This API call is for privileged code to specify temporary translation - * mappings without the need to create and manage a TSB. - */ - -/* mmu_unmap_addr() - * TRAP: HV_MMU_UNMAP_ADDR_TRAP - * ARG0: virtual address - * ARG1: mmu context - * ARG2: flags (HV_MMU_{IMMU,DMMU}) - * ERRORS: EINVAL Invalid virtual address, mmu context, or flags - * - * Demaps the given virtual address in the given mmu context on this - * CPU. This function is intended to be used to demap pages mapped - * with mmu_map_addr. This service is equivalent to invoking - * mmu_demap_page() with only the current CPU in the CPU list. The - * flags argument determines which (data, or instruction, or both) TLB - * the mapping gets unmapped from. - * - * Attempting to perform an unmap operation for a previously defined - * permanent mapping will have undefined results. - */ - -/* mmu_tsb_ctx0() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_MMU_TSB_CTX0 - * ARG0: number of TSB descriptions - * ARG1: TSB descriptions pointer - * RET0: status - * ERRORS: ENORADDR Invalid TSB descriptions pointer or - * TSB base within a descriptor - * EBADALIGN TSB descriptions pointer is not aligned - * to an 8-byte boundary, or TSB base - * within a descriptor is not aligned for - * the given TSB size - * EBADPGSZ Invalid page size in a TSB descriptor - * EBADTSB Invalid associativity or size in a TSB - * descriptor - * EINVAL Invalid number of TSB descriptions, or - * invalid context index in a TSB - * descriptor, or index page size not - * equal to smallest page size in page - * size bitmask field. - * - * Configures the TSBs for the current CPU for virtual addresses with - * context zero. The TSB descriptions pointer is a pointer to an - * array of the given number of TSB descriptions. - * - * Note: The maximum number of TSBs available to a virtual CPU is given by the - * mmu-max-#tsbs property of the cpu's corresponding "cpu" node in the - * machine description. - */ -#define HV_FAST_MMU_TSB_CTX0 0x20 - -#ifndef __ASSEMBLY__ -extern unsigned long sun4v_mmu_tsb_ctx0(unsigned long num_descriptions, - unsigned long tsb_desc_ra); -#endif - -/* mmu_tsb_ctxnon0() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_MMU_TSB_CTXNON0 - * ARG0: number of TSB descriptions - * ARG1: TSB descriptions pointer - * RET0: status - * ERRORS: Same as for mmu_tsb_ctx0() above. - * - * Configures the TSBs for the current CPU for virtual addresses with - * non-zero contexts. The TSB descriptions pointer is a pointer to an - * array of the given number of TSB descriptions. - * - * Note: A maximum of 16 TSBs may be specified in the TSB description list. - */ -#define HV_FAST_MMU_TSB_CTXNON0 0x21 - -/* mmu_demap_page() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_MMU_DEMAP_PAGE - * ARG0: reserved, must be zero - * ARG1: reserved, must be zero - * ARG2: virtual address - * ARG3: mmu context - * ARG4: flags (HV_MMU_{IMMU,DMMU}) - * RET0: status - * ERRORS: EINVAL Invalid virutal address, context, or - * flags value - * ENOTSUPPORTED ARG0 or ARG1 is non-zero - * - * Demaps any page mapping of the given virtual address in the given - * mmu context for the current virtual CPU. Any virtually tagged - * caches are guaranteed to be kept consistent. The flags argument - * determines which TLB (instruction, or data, or both) participate in - * the operation. - * - * ARG0 and ARG1 are both reserved and must be set to zero. - */ -#define HV_FAST_MMU_DEMAP_PAGE 0x22 - -/* mmu_demap_ctx() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_MMU_DEMAP_CTX - * ARG0: reserved, must be zero - * ARG1: reserved, must be zero - * ARG2: mmu context - * ARG3: flags (HV_MMU_{IMMU,DMMU}) - * RET0: status - * ERRORS: EINVAL Invalid context or flags value - * ENOTSUPPORTED ARG0 or ARG1 is non-zero - * - * Demaps all non-permanent virtual page mappings previously specified - * for the given context for the current virtual CPU. Any virtual - * tagged caches are guaranteed to be kept consistent. The flags - * argument determines which TLB (instruction, or data, or both) - * participate in the operation. - * - * ARG0 and ARG1 are both reserved and must be set to zero. - */ -#define HV_FAST_MMU_DEMAP_CTX 0x23 - -/* mmu_demap_all() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_MMU_DEMAP_ALL - * ARG0: reserved, must be zero - * ARG1: reserved, must be zero - * ARG2: flags (HV_MMU_{IMMU,DMMU}) - * RET0: status - * ERRORS: EINVAL Invalid flags value - * ENOTSUPPORTED ARG0 or ARG1 is non-zero - * - * Demaps all non-permanent virtual page mappings previously specified - * for the current virtual CPU. Any virtual tagged caches are - * guaranteed to be kept consistent. The flags argument determines - * which TLB (instruction, or data, or both) participate in the - * operation. - * - * ARG0 and ARG1 are both reserved and must be set to zero. - */ -#define HV_FAST_MMU_DEMAP_ALL 0x24 - -#ifndef __ASSEMBLY__ -extern void sun4v_mmu_demap_all(void); -#endif - -/* mmu_map_perm_addr() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_MMU_MAP_PERM_ADDR - * ARG0: virtual address - * ARG1: reserved, must be zero - * ARG2: TTE - * ARG3: flags (HV_MMU_{IMMU,DMMU}) - * RET0: status - * ERRORS: EINVAL Invalid virutal address or flags value - * EBADPGSZ Invalid page size value - * ENORADDR Invalid real address in TTE - * ETOOMANY Too many mappings (max of 8 reached) - * - * Create a permanent mapping using the given TTE and virtual address - * for context 0 on the calling virtual CPU. A maximum of 8 such - * permanent mappings may be specified by privileged code. Mappings - * may be removed with mmu_unmap_perm_addr(). - * - * The behavior is undefined if a TTE with the valid bit clear is given. - * - * Note: This call is used to specify address space mappings for which - * privileged code does not expect to receive misses. For example, - * this mechanism can be used to map kernel nucleus code and data. - */ -#define HV_FAST_MMU_MAP_PERM_ADDR 0x25 - -#ifndef __ASSEMBLY__ -extern unsigned long sun4v_mmu_map_perm_addr(unsigned long vaddr, - unsigned long set_to_zero, - unsigned long tte, - unsigned long flags); -#endif - -/* mmu_fault_area_conf() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_MMU_FAULT_AREA_CONF - * ARG0: real address - * RET0: status - * RET1: previous mmu fault area real address - * ERRORS: ENORADDR Invalid real address - * EBADALIGN Invalid alignment for fault area - * - * Configure the MMU fault status area for the calling CPU. A 64-byte - * aligned real address specifies where MMU fault status information - * is placed. The return value is the previously specified area, or 0 - * for the first invocation. Specifying a fault area at real address - * 0 is not allowed. - */ -#define HV_FAST_MMU_FAULT_AREA_CONF 0x26 - -/* mmu_enable() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_MMU_ENABLE - * ARG0: enable flag - * ARG1: return target address - * RET0: status - * ERRORS: ENORADDR Invalid real address when disabling - * translation. - * EBADALIGN The return target address is not - * aligned to an instruction. - * EINVAL The enable flag request the current - * operating mode (e.g. disable if already - * disabled) - * - * Enable or disable virtual address translation for the calling CPU - * within the virtual machine domain. If the enable flag is zero, - * translation is disabled, any non-zero value will enable - * translation. - * - * When this function returns, the newly selected translation mode - * will be active. If the mmu is being enabled, then the return - * target address is a virtual address else it is a real address. - * - * Upon successful completion, control will be returned to the given - * return target address (ie. the cpu will jump to that address). On - * failure, the previous mmu mode remains and the trap simply returns - * as normal with the appropriate error code in RET0. - */ -#define HV_FAST_MMU_ENABLE 0x27 - -/* mmu_unmap_perm_addr() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_MMU_UNMAP_PERM_ADDR - * ARG0: virtual address - * ARG1: reserved, must be zero - * ARG2: flags (HV_MMU_{IMMU,DMMU}) - * RET0: status - * ERRORS: EINVAL Invalid virutal address or flags value - * ENOMAP Specified mapping was not found - * - * Demaps any permanent page mapping (established via - * mmu_map_perm_addr()) at the given virtual address for context 0 on - * the current virtual CPU. Any virtual tagged caches are guaranteed - * to be kept consistent. - */ -#define HV_FAST_MMU_UNMAP_PERM_ADDR 0x28 - -/* mmu_tsb_ctx0_info() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_MMU_TSB_CTX0_INFO - * ARG0: max TSBs - * ARG1: buffer pointer - * RET0: status - * RET1: number of TSBs - * ERRORS: EINVAL Supplied buffer is too small - * EBADALIGN The buffer pointer is badly aligned - * ENORADDR Invalid real address for buffer pointer - * - * Return the TSB configuration as previous defined by mmu_tsb_ctx0() - * into the provided buffer. The size of the buffer is given in ARG1 - * in terms of the number of TSB description entries. - * - * Upon return, RET1 always contains the number of TSB descriptions - * previously configured. If zero TSBs were configured, EOK is - * returned with RET1 containing 0. - */ -#define HV_FAST_MMU_TSB_CTX0_INFO 0x29 - -/* mmu_tsb_ctxnon0_info() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_MMU_TSB_CTXNON0_INFO - * ARG0: max TSBs - * ARG1: buffer pointer - * RET0: status - * RET1: number of TSBs - * ERRORS: EINVAL Supplied buffer is too small - * EBADALIGN The buffer pointer is badly aligned - * ENORADDR Invalid real address for buffer pointer - * - * Return the TSB configuration as previous defined by - * mmu_tsb_ctxnon0() into the provided buffer. The size of the buffer - * is given in ARG1 in terms of the number of TSB description entries. - * - * Upon return, RET1 always contains the number of TSB descriptions - * previously configured. If zero TSBs were configured, EOK is - * returned with RET1 containing 0. - */ -#define HV_FAST_MMU_TSB_CTXNON0_INFO 0x2a - -/* mmu_fault_area_info() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_MMU_FAULT_AREA_INFO - * RET0: status - * RET1: fault area real address - * ERRORS: No errors defined. - * - * Return the currently defined MMU fault status area for the current - * CPU. The real address of the fault status area is returned in - * RET1, or 0 is returned in RET1 if no fault status area is defined. - * - * Note: mmu_fault_area_conf() may be called with the return value (RET1) - * from this service if there is a need to save and restore the fault - * area for a cpu. - */ -#define HV_FAST_MMU_FAULT_AREA_INFO 0x2b - -/* Cache and Memory services. */ - -/* mem_scrub() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_MEM_SCRUB - * ARG0: real address - * ARG1: length - * RET0: status - * RET1: length scrubbed - * ERRORS: ENORADDR Invalid real address - * EBADALIGN Start address or length are not correctly - * aligned - * EINVAL Length is zero - * - * Zero the memory contents in the range real address to real address - * plus length minus 1. Also, valid ECC will be generated for that - * memory address range. Scrubbing is started at the given real - * address, but may not scrub the entire given length. The actual - * length scrubbed will be returned in RET1. - * - * The real address and length must be aligned on an 8K boundary, or - * contain the start address and length from a sun4v error report. - * - * Note: There are two uses for this function. The first use is to block clear - * and initialize memory and the second is to scrub an u ncorrectable - * error reported via a resumable or non-resumable trap. The second - * use requires the arguments to be equal to the real address and length - * provided in a sun4v memory error report. - */ -#define HV_FAST_MEM_SCRUB 0x31 - -/* mem_sync() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_MEM_SYNC - * ARG0: real address - * ARG1: length - * RET0: status - * RET1: length synced - * ERRORS: ENORADDR Invalid real address - * EBADALIGN Start address or length are not correctly - * aligned - * EINVAL Length is zero - * - * Force the next access within the real address to real address plus - * length minus 1 to be fetches from main system memory. Less than - * the given length may be synced, the actual amount synced is - * returned in RET1. The real address and length must be aligned on - * an 8K boundary. - */ -#define HV_FAST_MEM_SYNC 0x32 - -/* Time of day services. - * - * The hypervisor maintains the time of day on a per-domain basis. - * Changing the time of day in one domain does not affect the time of - * day on any other domain. - * - * Time is described by a single unsigned 64-bit word which is the - * number of seconds since the UNIX Epoch (00:00:00 UTC, January 1, - * 1970). - */ - -/* tod_get() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_TOD_GET - * RET0: status - * RET1: TOD - * ERRORS: EWOULDBLOCK TOD resource is temporarily unavailable - * ENOTSUPPORTED If TOD not supported on this platform - * - * Return the current time of day. May block if TOD access is - * temporarily not possible. - */ -#define HV_FAST_TOD_GET 0x50 - -#ifndef __ASSEMBLY__ -extern unsigned long sun4v_tod_get(unsigned long *time); -#endif - -/* tod_set() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_TOD_SET - * ARG0: TOD - * RET0: status - * ERRORS: EWOULDBLOCK TOD resource is temporarily unavailable - * ENOTSUPPORTED If TOD not supported on this platform - * - * The current time of day is set to the value specified in ARG0. May - * block if TOD access is temporarily not possible. - */ -#define HV_FAST_TOD_SET 0x51 - -#ifndef __ASSEMBLY__ -extern unsigned long sun4v_tod_set(unsigned long time); -#endif - -/* Console services */ - -/* con_getchar() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_CONS_GETCHAR - * RET0: status - * RET1: character - * ERRORS: EWOULDBLOCK No character available. - * - * Returns a character from the console device. If no character is - * available then an EWOULDBLOCK error is returned. If a character is - * available, then the returned status is EOK and the character value - * is in RET1. - * - * A virtual BREAK is represented by the 64-bit value -1. - * - * A virtual HUP signal is represented by the 64-bit value -2. - */ -#define HV_FAST_CONS_GETCHAR 0x60 - -/* con_putchar() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_CONS_PUTCHAR - * ARG0: character - * RET0: status - * ERRORS: EINVAL Illegal character - * EWOULDBLOCK Output buffer currently full, would block - * - * Send a character to the console device. Only character values - * between 0 and 255 may be used. Values outside this range are - * invalid except for the 64-bit value -1 which is used to send a - * virtual BREAK. - */ -#define HV_FAST_CONS_PUTCHAR 0x61 - -/* con_read() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_CONS_READ - * ARG0: buffer real address - * ARG1: buffer size in bytes - * RET0: status - * RET1: bytes read or BREAK or HUP - * ERRORS: EWOULDBLOCK No character available. - * - * Reads characters into a buffer from the console device. If no - * character is available then an EWOULDBLOCK error is returned. - * If a character is available, then the returned status is EOK - * and the number of bytes read into the given buffer is provided - * in RET1. - * - * A virtual BREAK is represented by the 64-bit RET1 value -1. - * - * A virtual HUP signal is represented by the 64-bit RET1 value -2. - * - * If BREAK or HUP are indicated, no bytes were read into buffer. - */ -#define HV_FAST_CONS_READ 0x62 - -/* con_write() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_CONS_WRITE - * ARG0: buffer real address - * ARG1: buffer size in bytes - * RET0: status - * RET1: bytes written - * ERRORS: EWOULDBLOCK Output buffer currently full, would block - * - * Send a characters in buffer to the console device. Breaks must be - * sent using con_putchar(). - */ -#define HV_FAST_CONS_WRITE 0x63 - -#ifndef __ASSEMBLY__ -extern long sun4v_con_getchar(long *status); -extern long sun4v_con_putchar(long c); -extern long sun4v_con_read(unsigned long buffer, - unsigned long size, - unsigned long *bytes_read); -extern unsigned long sun4v_con_write(unsigned long buffer, - unsigned long size, - unsigned long *bytes_written); -#endif - -/* mach_set_soft_state() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_MACH_SET_SOFT_STATE - * ARG0: software state - * ARG1: software state description pointer - * RET0: status - * ERRORS: EINVAL software state not valid or software state - * description is not NULL terminated - * ENORADDR software state description pointer is not a - * valid real address - * EBADALIGNED software state description is not correctly - * aligned - * - * This allows the guest to report it's soft state to the hypervisor. There - * are two primary components to this state. The first part states whether - * the guest software is running or not. The second containts optional - * details specific to the software. - * - * The software state argument is defined below in HV_SOFT_STATE_*, and - * indicates whether the guest is operating normally or in a transitional - * state. - * - * The software state description argument is a real address of a data buffer - * of size 32-bytes aligned on a 32-byte boundary. It is treated as a NULL - * terminated 7-bit ASCII string of up to 31 characters not including the - * NULL termination. - */ -#define HV_FAST_MACH_SET_SOFT_STATE 0x70 -#define HV_SOFT_STATE_NORMAL 0x01 -#define HV_SOFT_STATE_TRANSITION 0x02 - -#ifndef __ASSEMBLY__ -extern unsigned long sun4v_mach_set_soft_state(unsigned long soft_state, - unsigned long msg_string_ra); -#endif - -/* mach_get_soft_state() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_MACH_GET_SOFT_STATE - * ARG0: software state description pointer - * RET0: status - * RET1: software state - * ERRORS: ENORADDR software state description pointer is not a - * valid real address - * EBADALIGNED software state description is not correctly - * aligned - * - * Retrieve the current value of the guest's software state. The rules - * for the software state pointer are the same as for mach_set_soft_state() - * above. - */ -#define HV_FAST_MACH_GET_SOFT_STATE 0x71 - -/* svc_send() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_SVC_SEND - * ARG0: service ID - * ARG1: buffer real address - * ARG2: buffer size - * RET0: STATUS - * RET1: sent_bytes - * - * Be careful, all output registers are clobbered by this operation, - * so for example it is not possible to save away a value in %o4 - * across the trap. - */ -#define HV_FAST_SVC_SEND 0x80 - -/* svc_recv() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_SVC_RECV - * ARG0: service ID - * ARG1: buffer real address - * ARG2: buffer size - * RET0: STATUS - * RET1: recv_bytes - * - * Be careful, all output registers are clobbered by this operation, - * so for example it is not possible to save away a value in %o4 - * across the trap. - */ -#define HV_FAST_SVC_RECV 0x81 - -/* svc_getstatus() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_SVC_GETSTATUS - * ARG0: service ID - * RET0: STATUS - * RET1: status bits - */ -#define HV_FAST_SVC_GETSTATUS 0x82 - -/* svc_setstatus() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_SVC_SETSTATUS - * ARG0: service ID - * ARG1: bits to set - * RET0: STATUS - */ -#define HV_FAST_SVC_SETSTATUS 0x83 - -/* svc_clrstatus() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_SVC_CLRSTATUS - * ARG0: service ID - * ARG1: bits to clear - * RET0: STATUS - */ -#define HV_FAST_SVC_CLRSTATUS 0x84 - -#ifndef __ASSEMBLY__ -extern unsigned long sun4v_svc_send(unsigned long svc_id, - unsigned long buffer, - unsigned long buffer_size, - unsigned long *sent_bytes); -extern unsigned long sun4v_svc_recv(unsigned long svc_id, - unsigned long buffer, - unsigned long buffer_size, - unsigned long *recv_bytes); -extern unsigned long sun4v_svc_getstatus(unsigned long svc_id, - unsigned long *status_bits); -extern unsigned long sun4v_svc_setstatus(unsigned long svc_id, - unsigned long status_bits); -extern unsigned long sun4v_svc_clrstatus(unsigned long svc_id, - unsigned long status_bits); -#endif - -/* Trap trace services. - * - * The hypervisor provides a trap tracing capability for privileged - * code running on each virtual CPU. Privileged code provides a - * round-robin trap trace queue within which the hypervisor writes - * 64-byte entries detailing hyperprivileged traps taken n behalf of - * privileged code. This is provided as a debugging capability for - * privileged code. - * - * The trap trace control structure is 64-bytes long and placed at the - * start (offset 0) of the trap trace buffer, and is described as - * follows: - */ -#ifndef __ASSEMBLY__ -struct hv_trap_trace_control { - unsigned long head_offset; - unsigned long tail_offset; - unsigned long __reserved[0x30 / sizeof(unsigned long)]; -}; -#endif -#define HV_TRAP_TRACE_CTRL_HEAD_OFFSET 0x00 -#define HV_TRAP_TRACE_CTRL_TAIL_OFFSET 0x08 - -/* The head offset is the offset of the most recently completed entry - * in the trap-trace buffer. The tail offset is the offset of the - * next entry to be written. The control structure is owned and - * modified by the hypervisor. A guest may not modify the control - * structure contents. Attempts to do so will result in undefined - * behavior for the guest. - * - * Each trap trace buffer entry is layed out as follows: - */ -#ifndef __ASSEMBLY__ -struct hv_trap_trace_entry { - unsigned char type; /* Hypervisor or guest entry? */ - unsigned char hpstate; /* Hyper-privileged state */ - unsigned char tl; /* Trap level */ - unsigned char gl; /* Global register level */ - unsigned short tt; /* Trap type */ - unsigned short tag; /* Extended trap identifier */ - unsigned long tstate; /* Trap state */ - unsigned long tick; /* Tick */ - unsigned long tpc; /* Trap PC */ - unsigned long f1; /* Entry specific */ - unsigned long f2; /* Entry specific */ - unsigned long f3; /* Entry specific */ - unsigned long f4; /* Entry specific */ -}; -#endif -#define HV_TRAP_TRACE_ENTRY_TYPE 0x00 -#define HV_TRAP_TRACE_ENTRY_HPSTATE 0x01 -#define HV_TRAP_TRACE_ENTRY_TL 0x02 -#define HV_TRAP_TRACE_ENTRY_GL 0x03 -#define HV_TRAP_TRACE_ENTRY_TT 0x04 -#define HV_TRAP_TRACE_ENTRY_TAG 0x06 -#define HV_TRAP_TRACE_ENTRY_TSTATE 0x08 -#define HV_TRAP_TRACE_ENTRY_TICK 0x10 -#define HV_TRAP_TRACE_ENTRY_TPC 0x18 -#define HV_TRAP_TRACE_ENTRY_F1 0x20 -#define HV_TRAP_TRACE_ENTRY_F2 0x28 -#define HV_TRAP_TRACE_ENTRY_F3 0x30 -#define HV_TRAP_TRACE_ENTRY_F4 0x38 - -/* The type field is encoded as follows. */ -#define HV_TRAP_TYPE_UNDEF 0x00 /* Entry content undefined */ -#define HV_TRAP_TYPE_HV 0x01 /* Hypervisor trap entry */ -#define HV_TRAP_TYPE_GUEST 0xff /* Added via ttrace_addentry() */ - -/* ttrace_buf_conf() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_TTRACE_BUF_CONF - * ARG0: real address - * ARG1: number of entries - * RET0: status - * RET1: number of entries - * ERRORS: ENORADDR Invalid real address - * EINVAL Size is too small - * EBADALIGN Real address not aligned on 64-byte boundary - * - * Requests hypervisor trap tracing and declares a virtual CPU's trap - * trace buffer to the hypervisor. The real address supplies the real - * base address of the trap trace queue and must be 64-byte aligned. - * Specifying a value of 0 for the number of entries disables trap - * tracing for the calling virtual CPU. The buffer allocated must be - * sized for a power of two number of 64-byte trap trace entries plus - * an initial 64-byte control structure. - * - * This may be invoked any number of times so that a virtual CPU may - * relocate a trap trace buffer or create "snapshots" of information. - * - * If the real address is illegal or badly aligned, then trap tracing - * is disabled and an error is returned. - * - * Upon failure with EINVAL, this service call returns in RET1 the - * minimum number of buffer entries required. Upon other failures - * RET1 is undefined. - */ -#define HV_FAST_TTRACE_BUF_CONF 0x90 - -/* ttrace_buf_info() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_TTRACE_BUF_INFO - * RET0: status - * RET1: real address - * RET2: size - * ERRORS: None defined. - * - * Returns the size and location of the previously declared trap-trace - * buffer. In the event that no buffer was previously defined, or the - * buffer is disabled, this call will return a size of zero bytes. - */ -#define HV_FAST_TTRACE_BUF_INFO 0x91 - -/* ttrace_enable() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_TTRACE_ENABLE - * ARG0: enable - * RET0: status - * RET1: previous enable state - * ERRORS: EINVAL No trap trace buffer currently defined - * - * Enable or disable trap tracing, and return the previous enabled - * state in RET1. Future systems may define various flags for the - * enable argument (ARG0), for the moment a guest should pass - * "(uint64_t) -1" to enable, and "(uint64_t) 0" to disable all - * tracing - which will ensure future compatability. - */ -#define HV_FAST_TTRACE_ENABLE 0x92 - -/* ttrace_freeze() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_TTRACE_FREEZE - * ARG0: freeze - * RET0: status - * RET1: previous freeze state - * ERRORS: EINVAL No trap trace buffer currently defined - * - * Freeze or unfreeze trap tracing, returning the previous freeze - * state in RET1. A guest should pass a non-zero value to freeze and - * a zero value to unfreeze all tracing. The returned previous state - * is 0 for not frozen and 1 for frozen. - */ -#define HV_FAST_TTRACE_FREEZE 0x93 - -/* ttrace_addentry() - * TRAP: HV_TTRACE_ADDENTRY_TRAP - * ARG0: tag (16-bits) - * ARG1: data word 0 - * ARG2: data word 1 - * ARG3: data word 2 - * ARG4: data word 3 - * RET0: status - * ERRORS: EINVAL No trap trace buffer currently defined - * - * Add an entry to the trap trace buffer. Upon return only ARG0/RET0 - * is modified - none of the other registers holding arguments are - * volatile across this hypervisor service. - */ - -/* Core dump services. - * - * Since the hypervisor viraulizes and thus obscures a lot of the - * physical machine layout and state, traditional OS crash dumps can - * be difficult to diagnose especially when the problem is a - * configuration error of some sort. - * - * The dump services provide an opaque buffer into which the - * hypervisor can place it's internal state in order to assist in - * debugging such situations. The contents are opaque and extremely - * platform and hypervisor implementation specific. The guest, during - * a core dump, requests that the hypervisor update any information in - * the dump buffer in preparation to being dumped as part of the - * domain's memory image. - */ - -/* dump_buf_update() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_DUMP_BUF_UPDATE - * ARG0: real address - * ARG1: size - * RET0: status - * RET1: required size of dump buffer - * ERRORS: ENORADDR Invalid real address - * EBADALIGN Real address is not aligned on a 64-byte - * boundary - * EINVAL Size is non-zero but less than minimum size - * required - * ENOTSUPPORTED Operation not supported on current logical - * domain - * - * Declare a domain dump buffer to the hypervisor. The real address - * provided for the domain dump buffer must be 64-byte aligned. The - * size specifies the size of the dump buffer and may be larger than - * the minimum size specified in the machine description. The - * hypervisor will fill the dump buffer with opaque data. - * - * Note: A guest may elect to include dump buffer contents as part of a crash - * dump to assist with debugging. This function may be called any number - * of times so that a guest may relocate a dump buffer, or create - * "snapshots" of any dump-buffer information. Each call to - * dump_buf_update() atomically declares the new dump buffer to the - * hypervisor. - * - * A specified size of 0 unconfigures the dump buffer. If the real - * address is illegal or badly aligned, then any currently active dump - * buffer is disabled and an error is returned. - * - * In the event that the call fails with EINVAL, RET1 contains the - * minimum size requires by the hypervisor for a valid dump buffer. - */ -#define HV_FAST_DUMP_BUF_UPDATE 0x94 - -/* dump_buf_info() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_DUMP_BUF_INFO - * RET0: status - * RET1: real address of current dump buffer - * RET2: size of current dump buffer - * ERRORS: No errors defined. - * - * Return the currently configures dump buffer description. A - * returned size of 0 bytes indicates an undefined dump buffer. In - * this case the return address in RET1 is undefined. - */ -#define HV_FAST_DUMP_BUF_INFO 0x95 - -/* Device interrupt services. - * - * Device interrupts are allocated to system bus bridges by the hypervisor, - * and described to OBP in the machine description. OBP then describes - * these interrupts to the OS via properties in the device tree. - * - * Terminology: - * - * cpuid Unique opaque value which represents a target cpu. - * - * devhandle Device handle. It uniquely identifies a device, and - * consistes of the lower 28-bits of the hi-cell of the - * first entry of the device's "reg" property in the - * OBP device tree. - * - * devino Device interrupt number. Specifies the relative - * interrupt number within the device. The unique - * combination of devhandle and devino are used to - * identify a specific device interrupt. - * - * Note: The devino value is the same as the values in the - * "interrupts" property or "interrupt-map" property - * in the OBP device tree for that device. - * - * sysino System interrupt number. A 64-bit unsigned interger - * representing a unique interrupt within a virtual - * machine. - * - * intr_state A flag representing the interrupt state for a given - * sysino. The state values are defined below. - * - * intr_enabled A flag representing the 'enabled' state for a given - * sysino. The enable values are defined below. - */ - -#define HV_INTR_STATE_IDLE 0 /* Nothing pending */ -#define HV_INTR_STATE_RECEIVED 1 /* Interrupt received by hardware */ -#define HV_INTR_STATE_DELIVERED 2 /* Interrupt delivered to queue */ - -#define HV_INTR_DISABLED 0 /* sysino not enabled */ -#define HV_INTR_ENABLED 1 /* sysino enabled */ - -/* intr_devino_to_sysino() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_INTR_DEVINO2SYSINO - * ARG0: devhandle - * ARG1: devino - * RET0: status - * RET1: sysino - * ERRORS: EINVAL Invalid devhandle/devino - * - * Converts a device specific interrupt number of the given - * devhandle/devino into a system specific ino (sysino). - */ -#define HV_FAST_INTR_DEVINO2SYSINO 0xa0 - -#ifndef __ASSEMBLY__ -extern unsigned long sun4v_devino_to_sysino(unsigned long devhandle, - unsigned long devino); -#endif - -/* intr_getenabled() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_INTR_GETENABLED - * ARG0: sysino - * RET0: status - * RET1: intr_enabled (HV_INTR_{DISABLED,ENABLED}) - * ERRORS: EINVAL Invalid sysino - * - * Returns interrupt enabled state in RET1 for the interrupt defined - * by the given sysino. - */ -#define HV_FAST_INTR_GETENABLED 0xa1 - -#ifndef __ASSEMBLY__ -extern unsigned long sun4v_intr_getenabled(unsigned long sysino); -#endif - -/* intr_setenabled() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_INTR_SETENABLED - * ARG0: sysino - * ARG1: intr_enabled (HV_INTR_{DISABLED,ENABLED}) - * RET0: status - * ERRORS: EINVAL Invalid sysino or intr_enabled value - * - * Set the 'enabled' state of the interrupt sysino. - */ -#define HV_FAST_INTR_SETENABLED 0xa2 - -#ifndef __ASSEMBLY__ -extern unsigned long sun4v_intr_setenabled(unsigned long sysino, unsigned long intr_enabled); -#endif - -/* intr_getstate() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_INTR_GETSTATE - * ARG0: sysino - * RET0: status - * RET1: intr_state (HV_INTR_STATE_*) - * ERRORS: EINVAL Invalid sysino - * - * Returns current state of the interrupt defined by the given sysino. - */ -#define HV_FAST_INTR_GETSTATE 0xa3 - -#ifndef __ASSEMBLY__ -extern unsigned long sun4v_intr_getstate(unsigned long sysino); -#endif - -/* intr_setstate() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_INTR_SETSTATE - * ARG0: sysino - * ARG1: intr_state (HV_INTR_STATE_*) - * RET0: status - * ERRORS: EINVAL Invalid sysino or intr_state value - * - * Sets the current state of the interrupt described by the given sysino - * value. - * - * Note: Setting the state to HV_INTR_STATE_IDLE clears any pending - * interrupt for sysino. - */ -#define HV_FAST_INTR_SETSTATE 0xa4 - -#ifndef __ASSEMBLY__ -extern unsigned long sun4v_intr_setstate(unsigned long sysino, unsigned long intr_state); -#endif - -/* intr_gettarget() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_INTR_GETTARGET - * ARG0: sysino - * RET0: status - * RET1: cpuid - * ERRORS: EINVAL Invalid sysino - * - * Returns CPU that is the current target of the interrupt defined by - * the given sysino. The CPU value returned is undefined if the target - * has not been set via intr_settarget(). - */ -#define HV_FAST_INTR_GETTARGET 0xa5 - -#ifndef __ASSEMBLY__ -extern unsigned long sun4v_intr_gettarget(unsigned long sysino); -#endif - -/* intr_settarget() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_INTR_SETTARGET - * ARG0: sysino - * ARG1: cpuid - * RET0: status - * ERRORS: EINVAL Invalid sysino - * ENOCPU Invalid cpuid - * - * Set the target CPU for the interrupt defined by the given sysino. - */ -#define HV_FAST_INTR_SETTARGET 0xa6 - -#ifndef __ASSEMBLY__ -extern unsigned long sun4v_intr_settarget(unsigned long sysino, unsigned long cpuid); -#endif - -/* vintr_get_cookie() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_VINTR_GET_COOKIE - * ARG0: device handle - * ARG1: device ino - * RET0: status - * RET1: cookie - */ -#define HV_FAST_VINTR_GET_COOKIE 0xa7 - -/* vintr_set_cookie() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_VINTR_SET_COOKIE - * ARG0: device handle - * ARG1: device ino - * ARG2: cookie - * RET0: status - */ -#define HV_FAST_VINTR_SET_COOKIE 0xa8 - -/* vintr_get_valid() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_VINTR_GET_VALID - * ARG0: device handle - * ARG1: device ino - * RET0: status - * RET1: valid state - */ -#define HV_FAST_VINTR_GET_VALID 0xa9 - -/* vintr_set_valid() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_VINTR_SET_VALID - * ARG0: device handle - * ARG1: device ino - * ARG2: valid state - * RET0: status - */ -#define HV_FAST_VINTR_SET_VALID 0xaa - -/* vintr_get_state() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_VINTR_GET_STATE - * ARG0: device handle - * ARG1: device ino - * RET0: status - * RET1: state - */ -#define HV_FAST_VINTR_GET_STATE 0xab - -/* vintr_set_state() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_VINTR_SET_STATE - * ARG0: device handle - * ARG1: device ino - * ARG2: state - * RET0: status - */ -#define HV_FAST_VINTR_SET_STATE 0xac - -/* vintr_get_target() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_VINTR_GET_TARGET - * ARG0: device handle - * ARG1: device ino - * RET0: status - * RET1: cpuid - */ -#define HV_FAST_VINTR_GET_TARGET 0xad - -/* vintr_set_target() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_VINTR_SET_TARGET - * ARG0: device handle - * ARG1: device ino - * ARG2: cpuid - * RET0: status - */ -#define HV_FAST_VINTR_SET_TARGET 0xae - -#ifndef __ASSEMBLY__ -extern unsigned long sun4v_vintr_get_cookie(unsigned long dev_handle, - unsigned long dev_ino, - unsigned long *cookie); -extern unsigned long sun4v_vintr_set_cookie(unsigned long dev_handle, - unsigned long dev_ino, - unsigned long cookie); -extern unsigned long sun4v_vintr_get_valid(unsigned long dev_handle, - unsigned long dev_ino, - unsigned long *valid); -extern unsigned long sun4v_vintr_set_valid(unsigned long dev_handle, - unsigned long dev_ino, - unsigned long valid); -extern unsigned long sun4v_vintr_get_state(unsigned long dev_handle, - unsigned long dev_ino, - unsigned long *state); -extern unsigned long sun4v_vintr_set_state(unsigned long dev_handle, - unsigned long dev_ino, - unsigned long state); -extern unsigned long sun4v_vintr_get_target(unsigned long dev_handle, - unsigned long dev_ino, - unsigned long *cpuid); -extern unsigned long sun4v_vintr_set_target(unsigned long dev_handle, - unsigned long dev_ino, - unsigned long cpuid); -#endif - -/* PCI IO services. - * - * See the terminology descriptions in the device interrupt services - * section above as those apply here too. Here are terminology - * definitions specific to these PCI IO services: - * - * tsbnum TSB number. Indentifies which io-tsb is used. - * For this version of the specification, tsbnum - * must be zero. - * - * tsbindex TSB index. Identifies which entry in the TSB - * is used. The first entry is zero. - * - * tsbid A 64-bit aligned data structure which contains - * a tsbnum and a tsbindex. Bits 63:32 contain the - * tsbnum and bits 31:00 contain the tsbindex. - * - * Use the HV_PCI_TSBID() macro to construct such - * values. - * - * io_attributes IO attributes for IOMMU mappings. One of more - * of the attritbute bits are stores in a 64-bit - * value. The values are defined below. - * - * r_addr 64-bit real address - * - * pci_device PCI device address. A PCI device address identifies - * a specific device on a specific PCI bus segment. - * A PCI device address ia a 32-bit unsigned integer - * with the following format: - * - * 00000000.bbbbbbbb.dddddfff.00000000 - * - * Use the HV_PCI_DEVICE_BUILD() macro to construct - * such values. - * - * pci_config_offset - * PCI configureation space offset. For conventional - * PCI a value between 0 and 255. For extended - * configuration space, a value between 0 and 4095. - * - * Note: For PCI configuration space accesses, the offset - * must be aligned to the access size. - * - * error_flag A return value which specifies if the action succeeded - * or failed. 0 means no error, non-0 means some error - * occurred while performing the service. - * - * io_sync_direction - * Direction definition for pci_dma_sync(), defined - * below in HV_PCI_SYNC_*. - * - * io_page_list A list of io_page_addresses, an io_page_address is - * a real address. - * - * io_page_list_p A pointer to an io_page_list. - * - * "size based byte swap" - Some functions do size based byte swapping - * which allows sw to access pointers and - * counters in native form when the processor - * operates in a different endianness than the - * IO bus. Size-based byte swapping converts a - * multi-byte field between big-endian and - * little-endian format. - */ - -#define HV_PCI_MAP_ATTR_READ 0x01 -#define HV_PCI_MAP_ATTR_WRITE 0x02 - -#define HV_PCI_DEVICE_BUILD(b,d,f) \ - ((((b) & 0xff) << 16) | \ - (((d) & 0x1f) << 11) | \ - (((f) & 0x07) << 8)) - -#define HV_PCI_TSBID(__tsb_num, __tsb_index) \ - ((((u64)(__tsb_num)) << 32UL) | ((u64)(__tsb_index))) - -#define HV_PCI_SYNC_FOR_DEVICE 0x01 -#define HV_PCI_SYNC_FOR_CPU 0x02 - -/* pci_iommu_map() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_PCI_IOMMU_MAP - * ARG0: devhandle - * ARG1: tsbid - * ARG2: #ttes - * ARG3: io_attributes - * ARG4: io_page_list_p - * RET0: status - * RET1: #ttes mapped - * ERRORS: EINVAL Invalid devhandle/tsbnum/tsbindex/io_attributes - * EBADALIGN Improperly aligned real address - * ENORADDR Invalid real address - * - * Create IOMMU mappings in the sun4v device defined by the given - * devhandle. The mappings are created in the TSB defined by the - * tsbnum component of the given tsbid. The first mapping is created - * in the TSB i ndex defined by the tsbindex component of the given tsbid. - * The call creates up to #ttes mappings, the first one at tsbnum, tsbindex, - * the second at tsbnum, tsbindex + 1, etc. - * - * All mappings are created with the attributes defined by the io_attributes - * argument. The page mapping addresses are described in the io_page_list - * defined by the given io_page_list_p, which is a pointer to the io_page_list. - * The first entry in the io_page_list is the address for the first iotte, the - * 2nd for the 2nd iotte, and so on. - * - * Each io_page_address in the io_page_list must be appropriately aligned. - * #ttes must be greater than zero. For this version of the spec, the tsbnum - * component of the given tsbid must be zero. - * - * Returns the actual number of mappings creates, which may be less than - * or equal to the argument #ttes. If the function returns a value which - * is less than the #ttes, the caller may continus to call the function with - * an updated tsbid, #ttes, io_page_list_p arguments until all pages are - * mapped. - * - * Note: This function does not imply an iotte cache flush. The guest must - * demap an entry before re-mapping it. - */ -#define HV_FAST_PCI_IOMMU_MAP 0xb0 - -/* pci_iommu_demap() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_PCI_IOMMU_DEMAP - * ARG0: devhandle - * ARG1: tsbid - * ARG2: #ttes - * RET0: status - * RET1: #ttes demapped - * ERRORS: EINVAL Invalid devhandle/tsbnum/tsbindex - * - * Demap and flush IOMMU mappings in the device defined by the given - * devhandle. Demaps up to #ttes entries in the TSB defined by the tsbnum - * component of the given tsbid, starting at the TSB index defined by the - * tsbindex component of the given tsbid. - * - * For this version of the spec, the tsbnum of the given tsbid must be zero. - * #ttes must be greater than zero. - * - * Returns the actual number of ttes demapped, which may be less than or equal - * to the argument #ttes. If #ttes demapped is less than #ttes, the caller - * may continue to call this function with updated tsbid and #ttes arguments - * until all pages are demapped. - * - * Note: Entries do not have to be mapped to be demapped. A demap of an - * unmapped page will flush the entry from the tte cache. - */ -#define HV_FAST_PCI_IOMMU_DEMAP 0xb1 - -/* pci_iommu_getmap() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_PCI_IOMMU_GETMAP - * ARG0: devhandle - * ARG1: tsbid - * RET0: status - * RET1: io_attributes - * RET2: real address - * ERRORS: EINVAL Invalid devhandle/tsbnum/tsbindex - * ENOMAP Mapping is not valid, no translation exists - * - * Read and return the mapping in the device described by the given devhandle - * and tsbid. If successful, the io_attributes shall be returned in RET1 - * and the page address of the mapping shall be returned in RET2. - * - * For this version of the spec, the tsbnum component of the given tsbid - * must be zero. - */ -#define HV_FAST_PCI_IOMMU_GETMAP 0xb2 - -/* pci_iommu_getbypass() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_PCI_IOMMU_GETBYPASS - * ARG0: devhandle - * ARG1: real address - * ARG2: io_attributes - * RET0: status - * RET1: io_addr - * ERRORS: EINVAL Invalid devhandle/io_attributes - * ENORADDR Invalid real address - * ENOTSUPPORTED Function not supported in this implementation. - * - * Create a "special" mapping in the device described by the given devhandle, - * for the given real address and attributes. Return the IO address in RET1 - * if successful. - */ -#define HV_FAST_PCI_IOMMU_GETBYPASS 0xb3 - -/* pci_config_get() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_PCI_CONFIG_GET - * ARG0: devhandle - * ARG1: pci_device - * ARG2: pci_config_offset - * ARG3: size - * RET0: status - * RET1: error_flag - * RET2: data - * ERRORS: EINVAL Invalid devhandle/pci_device/offset/size - * EBADALIGN pci_config_offset not size aligned - * ENOACCESS Access to this offset is not permitted - * - * Read PCI configuration space for the adapter described by the given - * devhandle. Read size (1, 2, or 4) bytes of data from the given - * pci_device, at pci_config_offset from the beginning of the device's - * configuration space. If there was no error, RET1 is set to zero and - * RET2 is set to the data read. Insignificant bits in RET2 are not - * guarenteed to have any specific value and therefore must be ignored. - * - * The data returned in RET2 is size based byte swapped. - * - * If an error occurs during the read, set RET1 to a non-zero value. The - * given pci_config_offset must be 'size' aligned. - */ -#define HV_FAST_PCI_CONFIG_GET 0xb4 - -/* pci_config_put() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_PCI_CONFIG_PUT - * ARG0: devhandle - * ARG1: pci_device - * ARG2: pci_config_offset - * ARG3: size - * ARG4: data - * RET0: status - * RET1: error_flag - * ERRORS: EINVAL Invalid devhandle/pci_device/offset/size - * EBADALIGN pci_config_offset not size aligned - * ENOACCESS Access to this offset is not permitted - * - * Write PCI configuration space for the adapter described by the given - * devhandle. Write size (1, 2, or 4) bytes of data in a single operation, - * at pci_config_offset from the beginning of the device's configuration - * space. The data argument contains the data to be written to configuration - * space. Prior to writing, the data is size based byte swapped. - * - * If an error occurs during the write access, do not generate an error - * report, do set RET1 to a non-zero value. Otherwise RET1 is zero. - * The given pci_config_offset must be 'size' aligned. - * - * This function is permitted to read from offset zero in the configuration - * space described by the given pci_device if necessary to ensure that the - * write access to config space completes. - */ -#define HV_FAST_PCI_CONFIG_PUT 0xb5 - -/* pci_peek() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_PCI_PEEK - * ARG0: devhandle - * ARG1: real address - * ARG2: size - * RET0: status - * RET1: error_flag - * RET2: data - * ERRORS: EINVAL Invalid devhandle or size - * EBADALIGN Improperly aligned real address - * ENORADDR Bad real address - * ENOACCESS Guest access prohibited - * - * Attempt to read the IO address given by the given devhandle, real address, - * and size. Size must be 1, 2, 4, or 8. The read is performed as a single - * access operation using the given size. If an error occurs when reading - * from the given location, do not generate an error report, but return a - * non-zero value in RET1. If the read was successful, return zero in RET1 - * and return the actual data read in RET2. The data returned is size based - * byte swapped. - * - * Non-significant bits in RET2 are not guarenteed to have any specific value - * and therefore must be ignored. If RET1 is returned as non-zero, the data - * value is not guarenteed to have any specific value and should be ignored. - * - * The caller must have permission to read from the given devhandle, real - * address, which must be an IO address. The argument real address must be a - * size aligned address. - * - * The hypervisor implementation of this function must block access to any - * IO address that the guest does not have explicit permission to access. - */ -#define HV_FAST_PCI_PEEK 0xb6 - -/* pci_poke() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_PCI_POKE - * ARG0: devhandle - * ARG1: real address - * ARG2: size - * ARG3: data - * ARG4: pci_device - * RET0: status - * RET1: error_flag - * ERRORS: EINVAL Invalid devhandle, size, or pci_device - * EBADALIGN Improperly aligned real address - * ENORADDR Bad real address - * ENOACCESS Guest access prohibited - * ENOTSUPPORTED Function is not supported by implementation - * - * Attempt to write data to the IO address given by the given devhandle, - * real address, and size. Size must be 1, 2, 4, or 8. The write is - * performed as a single access operation using the given size. Prior to - * writing the data is size based swapped. - * - * If an error occurs when writing to the given location, do not generate an - * error report, but return a non-zero value in RET1. If the write was - * successful, return zero in RET1. - * - * pci_device describes the configuration address of the device being - * written to. The implementation may safely read from offset 0 with - * the configuration space of the device described by devhandle and - * pci_device in order to guarantee that the write portion of the operation - * completes - * - * Any error that occurs due to the read shall be reported using the normal - * error reporting mechanisms .. the read error is not suppressed. - * - * The caller must have permission to write to the given devhandle, real - * address, which must be an IO address. The argument real address must be a - * size aligned address. The caller must have permission to read from - * the given devhandle, pci_device cofiguration space offset 0. - * - * The hypervisor implementation of this function must block access to any - * IO address that the guest does not have explicit permission to access. - */ -#define HV_FAST_PCI_POKE 0xb7 - -/* pci_dma_sync() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_PCI_DMA_SYNC - * ARG0: devhandle - * ARG1: real address - * ARG2: size - * ARG3: io_sync_direction - * RET0: status - * RET1: #synced - * ERRORS: EINVAL Invalid devhandle or io_sync_direction - * ENORADDR Bad real address - * - * Synchronize a memory region described by the given real address and size, - * for the device defined by the given devhandle using the direction(s) - * defined by the given io_sync_direction. The argument size is the size of - * the memory region in bytes. - * - * Return the actual number of bytes synchronized in the return value #synced, - * which may be less than or equal to the argument size. If the return - * value #synced is less than size, the caller must continue to call this - * function with updated real address and size arguments until the entire - * memory region is synchronized. - */ -#define HV_FAST_PCI_DMA_SYNC 0xb8 - -/* PCI MSI services. */ - -#define HV_MSITYPE_MSI32 0x00 -#define HV_MSITYPE_MSI64 0x01 - -#define HV_MSIQSTATE_IDLE 0x00 -#define HV_MSIQSTATE_ERROR 0x01 - -#define HV_MSIQ_INVALID 0x00 -#define HV_MSIQ_VALID 0x01 - -#define HV_MSISTATE_IDLE 0x00 -#define HV_MSISTATE_DELIVERED 0x01 - -#define HV_MSIVALID_INVALID 0x00 -#define HV_MSIVALID_VALID 0x01 - -#define HV_PCIE_MSGTYPE_PME_MSG 0x18 -#define HV_PCIE_MSGTYPE_PME_ACK_MSG 0x1b -#define HV_PCIE_MSGTYPE_CORR_MSG 0x30 -#define HV_PCIE_MSGTYPE_NONFATAL_MSG 0x31 -#define HV_PCIE_MSGTYPE_FATAL_MSG 0x33 - -#define HV_MSG_INVALID 0x00 -#define HV_MSG_VALID 0x01 - -/* pci_msiq_conf() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_PCI_MSIQ_CONF - * ARG0: devhandle - * ARG1: msiqid - * ARG2: real address - * ARG3: number of entries - * RET0: status - * ERRORS: EINVAL Invalid devhandle, msiqid or nentries - * EBADALIGN Improperly aligned real address - * ENORADDR Bad real address - * - * Configure the MSI queue given by the devhandle and msiqid arguments, - * and to be placed at the given real address and be of the given - * number of entries. The real address must be aligned exactly to match - * the queue size. Each queue entry is 64-bytes long, so f.e. a 32 entry - * queue must be aligned on a 2048 byte real address boundary. The MSI-EQ - * Head and Tail are initialized so that the MSI-EQ is 'empty'. - * - * Implementation Note: Certain implementations have fixed sized queues. In - * that case, number of entries must contain the correct - * value. - */ -#define HV_FAST_PCI_MSIQ_CONF 0xc0 - -/* pci_msiq_info() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_PCI_MSIQ_INFO - * ARG0: devhandle - * ARG1: msiqid - * RET0: status - * RET1: real address - * RET2: number of entries - * ERRORS: EINVAL Invalid devhandle or msiqid - * - * Return the configuration information for the MSI queue described - * by the given devhandle and msiqid. The base address of the queue - * is returned in ARG1 and the number of entries is returned in ARG2. - * If the queue is unconfigured, the real address is undefined and the - * number of entries will be returned as zero. - */ -#define HV_FAST_PCI_MSIQ_INFO 0xc1 - -/* pci_msiq_getvalid() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_PCI_MSIQ_GETVALID - * ARG0: devhandle - * ARG1: msiqid - * RET0: status - * RET1: msiqvalid (HV_MSIQ_VALID or HV_MSIQ_INVALID) - * ERRORS: EINVAL Invalid devhandle or msiqid - * - * Get the valid state of the MSI-EQ described by the given devhandle and - * msiqid. - */ -#define HV_FAST_PCI_MSIQ_GETVALID 0xc2 - -/* pci_msiq_setvalid() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_PCI_MSIQ_SETVALID - * ARG0: devhandle - * ARG1: msiqid - * ARG2: msiqvalid (HV_MSIQ_VALID or HV_MSIQ_INVALID) - * RET0: status - * ERRORS: EINVAL Invalid devhandle or msiqid or msiqvalid - * value or MSI EQ is uninitialized - * - * Set the valid state of the MSI-EQ described by the given devhandle and - * msiqid to the given msiqvalid. - */ -#define HV_FAST_PCI_MSIQ_SETVALID 0xc3 - -/* pci_msiq_getstate() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_PCI_MSIQ_GETSTATE - * ARG0: devhandle - * ARG1: msiqid - * RET0: status - * RET1: msiqstate (HV_MSIQSTATE_IDLE or HV_MSIQSTATE_ERROR) - * ERRORS: EINVAL Invalid devhandle or msiqid - * - * Get the state of the MSI-EQ described by the given devhandle and - * msiqid. - */ -#define HV_FAST_PCI_MSIQ_GETSTATE 0xc4 - -/* pci_msiq_getvalid() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_PCI_MSIQ_GETVALID - * ARG0: devhandle - * ARG1: msiqid - * ARG2: msiqstate (HV_MSIQSTATE_IDLE or HV_MSIQSTATE_ERROR) - * RET0: status - * ERRORS: EINVAL Invalid devhandle or msiqid or msiqstate - * value or MSI EQ is uninitialized - * - * Set the state of the MSI-EQ described by the given devhandle and - * msiqid to the given msiqvalid. - */ -#define HV_FAST_PCI_MSIQ_SETSTATE 0xc5 - -/* pci_msiq_gethead() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_PCI_MSIQ_GETHEAD - * ARG0: devhandle - * ARG1: msiqid - * RET0: status - * RET1: msiqhead - * ERRORS: EINVAL Invalid devhandle or msiqid - * - * Get the current MSI EQ queue head for the MSI-EQ described by the - * given devhandle and msiqid. - */ -#define HV_FAST_PCI_MSIQ_GETHEAD 0xc6 - -/* pci_msiq_sethead() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_PCI_MSIQ_SETHEAD - * ARG0: devhandle - * ARG1: msiqid - * ARG2: msiqhead - * RET0: status - * ERRORS: EINVAL Invalid devhandle or msiqid or msiqhead, - * or MSI EQ is uninitialized - * - * Set the current MSI EQ queue head for the MSI-EQ described by the - * given devhandle and msiqid. - */ -#define HV_FAST_PCI_MSIQ_SETHEAD 0xc7 - -/* pci_msiq_gettail() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_PCI_MSIQ_GETTAIL - * ARG0: devhandle - * ARG1: msiqid - * RET0: status - * RET1: msiqtail - * ERRORS: EINVAL Invalid devhandle or msiqid - * - * Get the current MSI EQ queue tail for the MSI-EQ described by the - * given devhandle and msiqid. - */ -#define HV_FAST_PCI_MSIQ_GETTAIL 0xc8 - -/* pci_msi_getvalid() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_PCI_MSI_GETVALID - * ARG0: devhandle - * ARG1: msinum - * RET0: status - * RET1: msivalidstate - * ERRORS: EINVAL Invalid devhandle or msinum - * - * Get the current valid/enabled state for the MSI defined by the - * given devhandle and msinum. - */ -#define HV_FAST_PCI_MSI_GETVALID 0xc9 - -/* pci_msi_setvalid() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_PCI_MSI_SETVALID - * ARG0: devhandle - * ARG1: msinum - * ARG2: msivalidstate - * RET0: status - * ERRORS: EINVAL Invalid devhandle or msinum or msivalidstate - * - * Set the current valid/enabled state for the MSI defined by the - * given devhandle and msinum. - */ -#define HV_FAST_PCI_MSI_SETVALID 0xca - -/* pci_msi_getmsiq() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_PCI_MSI_GETMSIQ - * ARG0: devhandle - * ARG1: msinum - * RET0: status - * RET1: msiqid - * ERRORS: EINVAL Invalid devhandle or msinum or MSI is unbound - * - * Get the MSI EQ that the MSI defined by the given devhandle and - * msinum is bound to. - */ -#define HV_FAST_PCI_MSI_GETMSIQ 0xcb - -/* pci_msi_setmsiq() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_PCI_MSI_SETMSIQ - * ARG0: devhandle - * ARG1: msinum - * ARG2: msitype - * ARG3: msiqid - * RET0: status - * ERRORS: EINVAL Invalid devhandle or msinum or msiqid - * - * Set the MSI EQ that the MSI defined by the given devhandle and - * msinum is bound to. - */ -#define HV_FAST_PCI_MSI_SETMSIQ 0xcc - -/* pci_msi_getstate() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_PCI_MSI_GETSTATE - * ARG0: devhandle - * ARG1: msinum - * RET0: status - * RET1: msistate - * ERRORS: EINVAL Invalid devhandle or msinum - * - * Get the state of the MSI defined by the given devhandle and msinum. - * If not initialized, return HV_MSISTATE_IDLE. - */ -#define HV_FAST_PCI_MSI_GETSTATE 0xcd - -/* pci_msi_setstate() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_PCI_MSI_SETSTATE - * ARG0: devhandle - * ARG1: msinum - * ARG2: msistate - * RET0: status - * ERRORS: EINVAL Invalid devhandle or msinum or msistate - * - * Set the state of the MSI defined by the given devhandle and msinum. - */ -#define HV_FAST_PCI_MSI_SETSTATE 0xce - -/* pci_msg_getmsiq() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_PCI_MSG_GETMSIQ - * ARG0: devhandle - * ARG1: msgtype - * RET0: status - * RET1: msiqid - * ERRORS: EINVAL Invalid devhandle or msgtype - * - * Get the MSI EQ of the MSG defined by the given devhandle and msgtype. - */ -#define HV_FAST_PCI_MSG_GETMSIQ 0xd0 - -/* pci_msg_setmsiq() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_PCI_MSG_SETMSIQ - * ARG0: devhandle - * ARG1: msgtype - * ARG2: msiqid - * RET0: status - * ERRORS: EINVAL Invalid devhandle, msgtype, or msiqid - * - * Set the MSI EQ of the MSG defined by the given devhandle and msgtype. - */ -#define HV_FAST_PCI_MSG_SETMSIQ 0xd1 - -/* pci_msg_getvalid() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_PCI_MSG_GETVALID - * ARG0: devhandle - * ARG1: msgtype - * RET0: status - * RET1: msgvalidstate - * ERRORS: EINVAL Invalid devhandle or msgtype - * - * Get the valid/enabled state of the MSG defined by the given - * devhandle and msgtype. - */ -#define HV_FAST_PCI_MSG_GETVALID 0xd2 - -/* pci_msg_setvalid() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_PCI_MSG_SETVALID - * ARG0: devhandle - * ARG1: msgtype - * ARG2: msgvalidstate - * RET0: status - * ERRORS: EINVAL Invalid devhandle or msgtype or msgvalidstate - * - * Set the valid/enabled state of the MSG defined by the given - * devhandle and msgtype. - */ -#define HV_FAST_PCI_MSG_SETVALID 0xd3 - -/* Logical Domain Channel services. */ - -#define LDC_CHANNEL_DOWN 0 -#define LDC_CHANNEL_UP 1 -#define LDC_CHANNEL_RESETTING 2 - -/* ldc_tx_qconf() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_LDC_TX_QCONF - * ARG0: channel ID - * ARG1: real address base of queue - * ARG2: num entries in queue - * RET0: status - * - * Configure transmit queue for the LDC endpoint specified by the - * given channel ID, to be placed at the given real address, and - * be of the given num entries. Num entries must be a power of two. - * The real address base of the queue must be aligned on the queue - * size. Each queue entry is 64-bytes, so for example, a 32 entry - * queue must be aligned on a 2048 byte real address boundary. - * - * Upon configuration of a valid transmit queue the head and tail - * pointers are set to a hypervisor specific identical value indicating - * that the queue initially is empty. - * - * The endpoint's transmit queue is un-configured if num entries is zero. - * - * The maximum number of entries for each queue for a specific cpu may be - * determined from the machine description. A transmit queue may be - * specified even in the event that the LDC is down (peer endpoint has no - * receive queue specified). Transmission will begin as soon as the peer - * endpoint defines a receive queue. - * - * It is recommended that a guest wait for a transmit queue to empty prior - * to reconfiguring it, or un-configuring it. Re or un-configuring of a - * non-empty transmit queue behaves exactly as defined above, however it - * is undefined as to how many of the pending entries in the original queue - * will be delivered prior to the re-configuration taking effect. - * Furthermore, as the queue configuration causes a reset of the head and - * tail pointers there is no way for a guest to determine how many entries - * have been sent after the configuration operation. - */ -#define HV_FAST_LDC_TX_QCONF 0xe0 - -/* ldc_tx_qinfo() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_LDC_TX_QINFO - * ARG0: channel ID - * RET0: status - * RET1: real address base of queue - * RET2: num entries in queue - * - * Return the configuration info for the transmit queue of LDC endpoint - * defined by the given channel ID. The real address is the currently - * defined real address base of the defined queue, and num entries is the - * size of the queue in terms of number of entries. - * - * If the specified channel ID is a valid endpoint number, but no transmit - * queue has been defined this service will return success, but with num - * entries set to zero and the real address will have an undefined value. - */ -#define HV_FAST_LDC_TX_QINFO 0xe1 - -/* ldc_tx_get_state() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_LDC_TX_GET_STATE - * ARG0: channel ID - * RET0: status - * RET1: head offset - * RET2: tail offset - * RET3: channel state - * - * Return the transmit state, and the head and tail queue pointers, for - * the transmit queue of the LDC endpoint defined by the given channel ID. - * The head and tail values are the byte offset of the head and tail - * positions of the transmit queue for the specified endpoint. - */ -#define HV_FAST_LDC_TX_GET_STATE 0xe2 - -/* ldc_tx_set_qtail() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_LDC_TX_SET_QTAIL - * ARG0: channel ID - * ARG1: tail offset - * RET0: status - * - * Update the tail pointer for the transmit queue associated with the LDC - * endpoint defined by the given channel ID. The tail offset specified - * must be aligned on a 64 byte boundary, and calculated so as to increase - * the number of pending entries on the transmit queue. Any attempt to - * decrease the number of pending transmit queue entires is considered - * an invalid tail offset and will result in an EINVAL error. - * - * Since the tail of the transmit queue may not be moved backwards, the - * transmit queue may be flushed by configuring a new transmit queue, - * whereupon the hypervisor will configure the initial transmit head and - * tail pointers to be equal. - */ -#define HV_FAST_LDC_TX_SET_QTAIL 0xe3 - -/* ldc_rx_qconf() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_LDC_RX_QCONF - * ARG0: channel ID - * ARG1: real address base of queue - * ARG2: num entries in queue - * RET0: status - * - * Configure receive queue for the LDC endpoint specified by the - * given channel ID, to be placed at the given real address, and - * be of the given num entries. Num entries must be a power of two. - * The real address base of the queue must be aligned on the queue - * size. Each queue entry is 64-bytes, so for example, a 32 entry - * queue must be aligned on a 2048 byte real address boundary. - * - * The endpoint's transmit queue is un-configured if num entries is zero. - * - * If a valid receive queue is specified for a local endpoint the LDC is - * in the up state for the purpose of transmission to this endpoint. - * - * The maximum number of entries for each queue for a specific cpu may be - * determined from the machine description. - * - * As receive queue configuration causes a reset of the queue's head and - * tail pointers there is no way for a gues to determine how many entries - * have been received between a preceeding ldc_get_rx_state() API call - * and the completion of the configuration operation. It should be noted - * that datagram delivery is not guarenteed via domain channels anyway, - * and therefore any higher protocol should be resilient to datagram - * loss if necessary. However, to overcome this specific race potential - * it is recommended, for example, that a higher level protocol be employed - * to ensure either retransmission, or ensure that no datagrams are pending - * on the peer endpoint's transmit queue prior to the configuration process. - */ -#define HV_FAST_LDC_RX_QCONF 0xe4 - -/* ldc_rx_qinfo() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_LDC_RX_QINFO - * ARG0: channel ID - * RET0: status - * RET1: real address base of queue - * RET2: num entries in queue - * - * Return the configuration info for the receive queue of LDC endpoint - * defined by the given channel ID. The real address is the currently - * defined real address base of the defined queue, and num entries is the - * size of the queue in terms of number of entries. - * - * If the specified channel ID is a valid endpoint number, but no receive - * queue has been defined this service will return success, but with num - * entries set to zero and the real address will have an undefined value. - */ -#define HV_FAST_LDC_RX_QINFO 0xe5 - -/* ldc_rx_get_state() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_LDC_RX_GET_STATE - * ARG0: channel ID - * RET0: status - * RET1: head offset - * RET2: tail offset - * RET3: channel state - * - * Return the receive state, and the head and tail queue pointers, for - * the receive queue of the LDC endpoint defined by the given channel ID. - * The head and tail values are the byte offset of the head and tail - * positions of the receive queue for the specified endpoint. - */ -#define HV_FAST_LDC_RX_GET_STATE 0xe6 - -/* ldc_rx_set_qhead() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_LDC_RX_SET_QHEAD - * ARG0: channel ID - * ARG1: head offset - * RET0: status - * - * Update the head pointer for the receive queue associated with the LDC - * endpoint defined by the given channel ID. The head offset specified - * must be aligned on a 64 byte boundary, and calculated so as to decrease - * the number of pending entries on the receive queue. Any attempt to - * increase the number of pending receive queue entires is considered - * an invalid head offset and will result in an EINVAL error. - * - * The receive queue may be flushed by setting the head offset equal - * to the current tail offset. - */ -#define HV_FAST_LDC_RX_SET_QHEAD 0xe7 - -/* LDC Map Table Entry. Each slot is defined by a translation table - * entry, as specified by the LDC_MTE_* bits below, and a 64-bit - * hypervisor invalidation cookie. - */ -#define LDC_MTE_PADDR 0x0fffffffffffe000 /* pa[55:13] */ -#define LDC_MTE_COPY_W 0x0000000000000400 /* copy write access */ -#define LDC_MTE_COPY_R 0x0000000000000200 /* copy read access */ -#define LDC_MTE_IOMMU_W 0x0000000000000100 /* IOMMU write access */ -#define LDC_MTE_IOMMU_R 0x0000000000000080 /* IOMMU read access */ -#define LDC_MTE_EXEC 0x0000000000000040 /* execute */ -#define LDC_MTE_WRITE 0x0000000000000020 /* read */ -#define LDC_MTE_READ 0x0000000000000010 /* write */ -#define LDC_MTE_SZALL 0x000000000000000f /* page size bits */ -#define LDC_MTE_SZ16GB 0x0000000000000007 /* 16GB page */ -#define LDC_MTE_SZ2GB 0x0000000000000006 /* 2GB page */ -#define LDC_MTE_SZ256MB 0x0000000000000005 /* 256MB page */ -#define LDC_MTE_SZ32MB 0x0000000000000004 /* 32MB page */ -#define LDC_MTE_SZ4MB 0x0000000000000003 /* 4MB page */ -#define LDC_MTE_SZ512K 0x0000000000000002 /* 512K page */ -#define LDC_MTE_SZ64K 0x0000000000000001 /* 64K page */ -#define LDC_MTE_SZ8K 0x0000000000000000 /* 8K page */ - -#ifndef __ASSEMBLY__ -struct ldc_mtable_entry { - unsigned long mte; - unsigned long cookie; -}; -#endif - -/* ldc_set_map_table() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_LDC_SET_MAP_TABLE - * ARG0: channel ID - * ARG1: table real address - * ARG2: num entries - * RET0: status - * - * Register the MTE table at the given table real address, with the - * specified num entries, for the LDC indicated by the given channel - * ID. - */ -#define HV_FAST_LDC_SET_MAP_TABLE 0xea - -/* ldc_get_map_table() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_LDC_GET_MAP_TABLE - * ARG0: channel ID - * RET0: status - * RET1: table real address - * RET2: num entries - * - * Return the configuration of the current mapping table registered - * for the given channel ID. - */ -#define HV_FAST_LDC_GET_MAP_TABLE 0xeb - -#define LDC_COPY_IN 0 -#define LDC_COPY_OUT 1 - -/* ldc_copy() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_LDC_COPY - * ARG0: channel ID - * ARG1: LDC_COPY_* direction code - * ARG2: target real address - * ARG3: local real address - * ARG4: length in bytes - * RET0: status - * RET1: actual length in bytes - */ -#define HV_FAST_LDC_COPY 0xec - -#define LDC_MEM_READ 1 -#define LDC_MEM_WRITE 2 -#define LDC_MEM_EXEC 4 - -/* ldc_mapin() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_LDC_MAPIN - * ARG0: channel ID - * ARG1: cookie - * RET0: status - * RET1: real address - * RET2: LDC_MEM_* permissions - */ -#define HV_FAST_LDC_MAPIN 0xed - -/* ldc_unmap() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_LDC_UNMAP - * ARG0: real address - * RET0: status - */ -#define HV_FAST_LDC_UNMAP 0xee - -/* ldc_revoke() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_LDC_REVOKE - * ARG0: channel ID - * ARG1: cookie - * ARG2: ldc_mtable_entry cookie - * RET0: status - */ -#define HV_FAST_LDC_REVOKE 0xef - -#ifndef __ASSEMBLY__ -extern unsigned long sun4v_ldc_tx_qconf(unsigned long channel, - unsigned long ra, - unsigned long num_entries); -extern unsigned long sun4v_ldc_tx_qinfo(unsigned long channel, - unsigned long *ra, - unsigned long *num_entries); -extern unsigned long sun4v_ldc_tx_get_state(unsigned long channel, - unsigned long *head_off, - unsigned long *tail_off, - unsigned long *chan_state); -extern unsigned long sun4v_ldc_tx_set_qtail(unsigned long channel, - unsigned long tail_off); -extern unsigned long sun4v_ldc_rx_qconf(unsigned long channel, - unsigned long ra, - unsigned long num_entries); -extern unsigned long sun4v_ldc_rx_qinfo(unsigned long channel, - unsigned long *ra, - unsigned long *num_entries); -extern unsigned long sun4v_ldc_rx_get_state(unsigned long channel, - unsigned long *head_off, - unsigned long *tail_off, - unsigned long *chan_state); -extern unsigned long sun4v_ldc_rx_set_qhead(unsigned long channel, - unsigned long head_off); -extern unsigned long sun4v_ldc_set_map_table(unsigned long channel, - unsigned long ra, - unsigned long num_entries); -extern unsigned long sun4v_ldc_get_map_table(unsigned long channel, - unsigned long *ra, - unsigned long *num_entries); -extern unsigned long sun4v_ldc_copy(unsigned long channel, - unsigned long dir_code, - unsigned long tgt_raddr, - unsigned long lcl_raddr, - unsigned long len, - unsigned long *actual_len); -extern unsigned long sun4v_ldc_mapin(unsigned long channel, - unsigned long cookie, - unsigned long *ra, - unsigned long *perm); -extern unsigned long sun4v_ldc_unmap(unsigned long ra); -extern unsigned long sun4v_ldc_revoke(unsigned long channel, - unsigned long cookie, - unsigned long mte_cookie); -#endif - -/* Performance counter services. */ - -#define HV_PERF_JBUS_PERF_CTRL_REG 0x00 -#define HV_PERF_JBUS_PERF_CNT_REG 0x01 -#define HV_PERF_DRAM_PERF_CTRL_REG_0 0x02 -#define HV_PERF_DRAM_PERF_CNT_REG_0 0x03 -#define HV_PERF_DRAM_PERF_CTRL_REG_1 0x04 -#define HV_PERF_DRAM_PERF_CNT_REG_1 0x05 -#define HV_PERF_DRAM_PERF_CTRL_REG_2 0x06 -#define HV_PERF_DRAM_PERF_CNT_REG_2 0x07 -#define HV_PERF_DRAM_PERF_CTRL_REG_3 0x08 -#define HV_PERF_DRAM_PERF_CNT_REG_3 0x09 - -/* get_perfreg() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_GET_PERFREG - * ARG0: performance reg number - * RET0: status - * RET1: performance reg value - * ERRORS: EINVAL Invalid performance register number - * ENOACCESS No access allowed to performance counters - * - * Read the value of the given DRAM/JBUS performance counter/control register. - */ -#define HV_FAST_GET_PERFREG 0x100 - -/* set_perfreg() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_SET_PERFREG - * ARG0: performance reg number - * ARG1: performance reg value - * RET0: status - * ERRORS: EINVAL Invalid performance register number - * ENOACCESS No access allowed to performance counters - * - * Write the given performance reg value to the given DRAM/JBUS - * performance counter/control register. - */ -#define HV_FAST_SET_PERFREG 0x101 - -/* MMU statistics services. - * - * The hypervisor maintains MMU statistics and privileged code provides - * a buffer where these statistics can be collected. It is continually - * updated once configured. The layout is as follows: - */ -#ifndef __ASSEMBLY__ -struct hv_mmu_statistics { - unsigned long immu_tsb_hits_ctx0_8k_tte; - unsigned long immu_tsb_ticks_ctx0_8k_tte; - unsigned long immu_tsb_hits_ctx0_64k_tte; - unsigned long immu_tsb_ticks_ctx0_64k_tte; - unsigned long __reserved1[2]; - unsigned long immu_tsb_hits_ctx0_4mb_tte; - unsigned long immu_tsb_ticks_ctx0_4mb_tte; - unsigned long __reserved2[2]; - unsigned long immu_tsb_hits_ctx0_256mb_tte; - unsigned long immu_tsb_ticks_ctx0_256mb_tte; - unsigned long __reserved3[4]; - unsigned long immu_tsb_hits_ctxnon0_8k_tte; - unsigned long immu_tsb_ticks_ctxnon0_8k_tte; - unsigned long immu_tsb_hits_ctxnon0_64k_tte; - unsigned long immu_tsb_ticks_ctxnon0_64k_tte; - unsigned long __reserved4[2]; - unsigned long immu_tsb_hits_ctxnon0_4mb_tte; - unsigned long immu_tsb_ticks_ctxnon0_4mb_tte; - unsigned long __reserved5[2]; - unsigned long immu_tsb_hits_ctxnon0_256mb_tte; - unsigned long immu_tsb_ticks_ctxnon0_256mb_tte; - unsigned long __reserved6[4]; - unsigned long dmmu_tsb_hits_ctx0_8k_tte; - unsigned long dmmu_tsb_ticks_ctx0_8k_tte; - unsigned long dmmu_tsb_hits_ctx0_64k_tte; - unsigned long dmmu_tsb_ticks_ctx0_64k_tte; - unsigned long __reserved7[2]; - unsigned long dmmu_tsb_hits_ctx0_4mb_tte; - unsigned long dmmu_tsb_ticks_ctx0_4mb_tte; - unsigned long __reserved8[2]; - unsigned long dmmu_tsb_hits_ctx0_256mb_tte; - unsigned long dmmu_tsb_ticks_ctx0_256mb_tte; - unsigned long __reserved9[4]; - unsigned long dmmu_tsb_hits_ctxnon0_8k_tte; - unsigned long dmmu_tsb_ticks_ctxnon0_8k_tte; - unsigned long dmmu_tsb_hits_ctxnon0_64k_tte; - unsigned long dmmu_tsb_ticks_ctxnon0_64k_tte; - unsigned long __reserved10[2]; - unsigned long dmmu_tsb_hits_ctxnon0_4mb_tte; - unsigned long dmmu_tsb_ticks_ctxnon0_4mb_tte; - unsigned long __reserved11[2]; - unsigned long dmmu_tsb_hits_ctxnon0_256mb_tte; - unsigned long dmmu_tsb_ticks_ctxnon0_256mb_tte; - unsigned long __reserved12[4]; -}; -#endif - -/* mmustat_conf() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_MMUSTAT_CONF - * ARG0: real address - * RET0: status - * RET1: real address - * ERRORS: ENORADDR Invalid real address - * EBADALIGN Real address not aligned on 64-byte boundary - * EBADTRAP API not supported on this processor - * - * Enable MMU statistic gathering using the buffer at the given real - * address on the current virtual CPU. The new buffer real address - * is given in ARG1, and the previously specified buffer real address - * is returned in RET1, or is returned as zero for the first invocation. - * - * If the passed in real address argument is zero, this will disable - * MMU statistic collection on the current virtual CPU. If an error is - * returned then no statistics are collected. - * - * The buffer contents should be initialized to all zeros before being - * given to the hypervisor or else the statistics will be meaningless. - */ -#define HV_FAST_MMUSTAT_CONF 0x102 - -/* mmustat_info() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_MMUSTAT_INFO - * RET0: status - * RET1: real address - * ERRORS: EBADTRAP API not supported on this processor - * - * Return the current state and real address of the currently configured - * MMU statistics buffer on the current virtual CPU. - */ -#define HV_FAST_MMUSTAT_INFO 0x103 - -#ifndef __ASSEMBLY__ -extern unsigned long sun4v_mmustat_conf(unsigned long ra, unsigned long *orig_ra); -extern unsigned long sun4v_mmustat_info(unsigned long *ra); -#endif - -/* NCS crypto services */ - -/* ncs_request() sub-function numbers */ -#define HV_NCS_QCONF 0x01 -#define HV_NCS_QTAIL_UPDATE 0x02 - -#ifndef __ASSEMBLY__ -struct hv_ncs_queue_entry { - /* MAU Control Register */ - unsigned long mau_control; -#define MAU_CONTROL_INV_PARITY 0x0000000000002000 -#define MAU_CONTROL_STRAND 0x0000000000001800 -#define MAU_CONTROL_BUSY 0x0000000000000400 -#define MAU_CONTROL_INT 0x0000000000000200 -#define MAU_CONTROL_OP 0x00000000000001c0 -#define MAU_CONTROL_OP_SHIFT 6 -#define MAU_OP_LOAD_MA_MEMORY 0x0 -#define MAU_OP_STORE_MA_MEMORY 0x1 -#define MAU_OP_MODULAR_MULT 0x2 -#define MAU_OP_MODULAR_REDUCE 0x3 -#define MAU_OP_MODULAR_EXP_LOOP 0x4 -#define MAU_CONTROL_LEN 0x000000000000003f -#define MAU_CONTROL_LEN_SHIFT 0 - - /* Real address of bytes to load or store bytes - * into/out-of the MAU. - */ - unsigned long mau_mpa; - - /* Modular Arithmetic MA Offset Register. */ - unsigned long mau_ma; - - /* Modular Arithmetic N Prime Register. */ - unsigned long mau_np; -}; - -struct hv_ncs_qconf_arg { - unsigned long mid; /* MAU ID, 1 per core on Niagara */ - unsigned long base; /* Real address base of queue */ - unsigned long end; /* Real address end of queue */ - unsigned long num_ents; /* Number of entries in queue */ -}; - -struct hv_ncs_qtail_update_arg { - unsigned long mid; /* MAU ID, 1 per core on Niagara */ - unsigned long tail; /* New tail index to use */ - unsigned long syncflag; /* only SYNCFLAG_SYNC is implemented */ -#define HV_NCS_SYNCFLAG_SYNC 0x00 -#define HV_NCS_SYNCFLAG_ASYNC 0x01 -}; -#endif - -/* ncs_request() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_NCS_REQUEST - * ARG0: NCS sub-function - * ARG1: sub-function argument real address - * ARG2: size in bytes of sub-function argument - * RET0: status - * - * The MAU chip of the Niagara processor is not directly accessible - * to privileged code, instead it is programmed indirectly via this - * hypervisor API. - * - * The interfaces defines a queue of MAU operations to perform. - * Privileged code registers a queue with the hypervisor by invoking - * this HVAPI with the HV_NCS_QCONF sub-function, which defines the - * base, end, and number of entries of the queue. Each queue entry - * contains a MAU register struct block. - * - * The privileged code then proceeds to add entries to the queue and - * then invoke the HV_NCS_QTAIL_UPDATE sub-function. Since only - * synchronous operations are supported by the current hypervisor, - * HV_NCS_QTAIL_UPDATE will run all the pending queue entries to - * completion and return HV_EOK, or return an error code. - * - * The real address of the sub-function argument must be aligned on at - * least an 8-byte boundary. - * - * The tail argument of HV_NCS_QTAIL_UPDATE is an index, not a byte - * offset, into the queue and must be less than or equal the 'num_ents' - * argument given in the HV_NCS_QCONF call. - */ -#define HV_FAST_NCS_REQUEST 0x110 - -#ifndef __ASSEMBLY__ -extern unsigned long sun4v_ncs_request(unsigned long request, - unsigned long arg_ra, - unsigned long arg_size); -#endif - -#define HV_FAST_FIRE_GET_PERFREG 0x120 -#define HV_FAST_FIRE_SET_PERFREG 0x121 - -/* Function numbers for HV_CORE_TRAP. */ -#define HV_CORE_SET_VER 0x00 -#define HV_CORE_PUTCHAR 0x01 -#define HV_CORE_EXIT 0x02 -#define HV_CORE_GET_VER 0x03 - -/* Hypervisor API groups for use with HV_CORE_SET_VER and - * HV_CORE_GET_VER. - */ -#define HV_GRP_SUN4V 0x0000 -#define HV_GRP_CORE 0x0001 -#define HV_GRP_INTR 0x0002 -#define HV_GRP_SOFT_STATE 0x0003 -#define HV_GRP_PCI 0x0100 -#define HV_GRP_LDOM 0x0101 -#define HV_GRP_SVC_CHAN 0x0102 -#define HV_GRP_NCS 0x0103 -#define HV_GRP_RNG 0x0104 -#define HV_GRP_NIAG_PERF 0x0200 -#define HV_GRP_FIRE_PERF 0x0201 -#define HV_GRP_N2_CPU 0x0202 -#define HV_GRP_NIU 0x0204 -#define HV_GRP_VF_CPU 0x0205 -#define HV_GRP_DIAG 0x0300 - -#ifndef __ASSEMBLY__ -extern unsigned long sun4v_get_version(unsigned long group, - unsigned long *major, - unsigned long *minor); -extern unsigned long sun4v_set_version(unsigned long group, - unsigned long major, - unsigned long minor, - unsigned long *actual_minor); - -extern int sun4v_hvapi_register(unsigned long group, unsigned long major, - unsigned long *minor); -extern void sun4v_hvapi_unregister(unsigned long group); -extern int sun4v_hvapi_get(unsigned long group, - unsigned long *major, - unsigned long *minor); -extern void sun4v_hvapi_init(void); -#endif - -#endif /* !(_SPARC64_HYPERVISOR_H) */ |