diff options
Diffstat (limited to 'include/drm/drm_crtc.h')
| -rw-r--r-- | include/drm/drm_crtc.h | 212 |
1 files changed, 198 insertions, 14 deletions
diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h index 802079809282..63e4fce67288 100644 --- a/include/drm/drm_crtc.h +++ b/include/drm/drm_crtc.h @@ -29,9 +29,10 @@ #include <linux/spinlock.h> #include <linux/types.h> #include <linux/idr.h> - #include <linux/fb.h> +#include <drm/drm_fourcc.h> + struct drm_device; struct drm_mode_set; struct drm_framebuffer; @@ -44,6 +45,7 @@ struct drm_framebuffer; #define DRM_MODE_OBJECT_PROPERTY 0xb0b0b0b0 #define DRM_MODE_OBJECT_FB 0xfbfbfbfb #define DRM_MODE_OBJECT_BLOB 0xbbbbbbbb +#define DRM_MODE_OBJECT_PLANE 0xeeeeeeee struct drm_mode_object { uint32_t id; @@ -118,7 +120,6 @@ struct drm_display_mode { char name[DRM_DISPLAY_MODE_LEN]; - int connector_count; enum drm_mode_status status; int type; @@ -238,13 +239,15 @@ struct drm_framebuffer { struct list_head head; struct drm_mode_object base; const struct drm_framebuffer_funcs *funcs; - unsigned int pitch; + unsigned int pitches[4]; + unsigned int offsets[4]; unsigned int width; unsigned int height; /* depth can be 15 or 16 */ unsigned int depth; int bits_per_pixel; int flags; + uint32_t pixel_format; /* fourcc format */ struct list_head filp_head; /* if you are using the helper */ void *helper_private; @@ -278,6 +281,7 @@ struct drm_crtc; struct drm_connector; struct drm_encoder; struct drm_pending_vblank_event; +struct drm_plane; /** * drm_crtc_funcs - control CRTCs for a given device @@ -341,10 +345,21 @@ struct drm_crtc_funcs { /** * drm_crtc - central CRTC control structure + * @dev: parent DRM device + * @head: list management + * @base: base KMS object for ID tracking etc. * @enabled: is this CRTC enabled? + * @mode: current mode timings + * @hwmode: mode timings as programmed to hw regs * @x: x position on screen * @y: y position on screen * @funcs: CRTC control functions + * @gamma_size: size of gamma ramp + * @gamma_store: gamma ramp values + * @framedur_ns: precise frame timing + * @framedur_ns: precise line timing + * @pixeldur_ns: precise pixel timing + * @helper_private: mid-layer private data * * Each CRTC may have one or more connectors associated with it. This structure * allows the CRTC to be controlled. @@ -423,6 +438,13 @@ struct drm_connector_funcs { void (*force)(struct drm_connector *connector); }; +/** + * drm_encoder_funcs - encoder controls + * @reset: reset state (e.g. at init or resume time) + * @destroy: cleanup and free associated data + * + * Encoders sit between CRTCs and connectors. + */ struct drm_encoder_funcs { void (*reset)(struct drm_encoder *encoder); void (*destroy)(struct drm_encoder *encoder); @@ -435,6 +457,18 @@ struct drm_encoder_funcs { /** * drm_encoder - central DRM encoder structure + * @dev: parent DRM device + * @head: list management + * @base: base KMS object + * @encoder_type: one of the %DRM_MODE_ENCODER_<foo> types in drm_mode.h + * @possible_crtcs: bitmask of potential CRTC bindings + * @possible_clones: bitmask of potential sibling encoders for cloning + * @crtc: currently bound CRTC + * @funcs: control functions + * @helper_private: mid-layer private data + * + * CRTCs drive pixels to encoders, which convert them into signals + * appropriate for a given connector or set of connectors. */ struct drm_encoder { struct drm_device *dev; @@ -470,14 +504,37 @@ enum drm_connector_force { /** * drm_connector - central DRM connector control structure - * @crtc: CRTC this connector is currently connected to, NULL if none + * @dev: parent DRM device + * @kdev: kernel device for sysfs attributes + * @attr: sysfs attributes + * @head: list management + * @base: base KMS object + * @connector_type: one of the %DRM_MODE_CONNECTOR_<foo> types from drm_mode.h + * @connector_type_id: index into connector type enum * @interlace_allowed: can this connector handle interlaced modes? * @doublescan_allowed: can this connector handle doublescan? - * @available_modes: modes available on this connector (from get_modes() + user) - * @initial_x: initial x position for this connector - * @initial_y: initial y position for this connector - * @status: connector connected? + * @modes: modes available on this connector (from fill_modes() + user) + * @status: one of the drm_connector_status enums (connected, not, or unknown) + * @probed_modes: list of modes derived directly from the display + * @display_info: information about attached display (e.g. from EDID) * @funcs: connector control functions + * @user_modes: user added mode list + * @edid_blob_ptr: DRM property containing EDID if present + * @property_ids: property tracking for this connector + * @property_values: value pointers or data for properties + * @polled: a %DRM_CONNECTOR_POLL_<foo> value for core driven polling + * @dpms: current dpms state + * @helper_private: mid-layer private data + * @force: a %DRM_FORCE_<foo> state for forced mode sets + * @encoder_ids: valid encoders for this connector + * @encoder: encoder driving this connector, if any + * @eld: EDID-like data, if present + * @dvi_dual: dual link DVI, if found + * @max_tmds_clock: max clock rate, if found + * @latency_present: AV delay info from ELD, if found + * @video_latency: video latency info from ELD, if found + * @audio_latency: audio latency info from ELD, if found + * @null_edid_counter: track sinks that give us all zeros for the EDID * * Each connector may be connected to one or more CRTCs, or may be clonable by * another connector if they can share a CRTC. Each connector also has a specific @@ -498,7 +555,6 @@ struct drm_connector { bool doublescan_allowed; struct list_head modes; /* list of modes on this connector */ - int initial_x, initial_y; enum drm_connector_status status; /* these are modes added by probing with DDC or the BIOS */ @@ -522,7 +578,6 @@ struct drm_connector { /* forced on connector */ enum drm_connector_force force; uint32_t encoder_ids[DRM_CONNECTOR_MAX_ENCODER]; - uint32_t force_encoder_id; struct drm_encoder *encoder; /* currently active encoder */ /* EDID bits */ @@ -536,7 +591,71 @@ struct drm_connector { }; /** - * struct drm_mode_set + * drm_plane_funcs - driver plane control functions + * @update_plane: update the plane configuration + * @disable_plane: shut down the plane + * @destroy: clean up plane resources + */ +struct drm_plane_funcs { + int (*update_plane)(struct drm_plane *plane, + struct drm_crtc *crtc, struct drm_framebuffer *fb, + int crtc_x, int crtc_y, + unsigned int crtc_w, unsigned int crtc_h, + uint32_t src_x, uint32_t src_y, + uint32_t src_w, uint32_t src_h); + int (*disable_plane)(struct drm_plane *plane); + void (*destroy)(struct drm_plane *plane); +}; + +/** + * drm_plane - central DRM plane control structure + * @dev: DRM device this plane belongs to + * @head: for list management + * @base: base mode object + * @possible_crtcs: pipes this plane can be bound to + * @format_types: array of formats supported by this plane + * @format_count: number of formats supported + * @crtc: currently bound CRTC + * @fb: currently bound fb + * @gamma_size: size of gamma table + * @gamma_store: gamma correction table + * @enabled: enabled flag + * @funcs: helper functions + * @helper_private: storage for drver layer + */ +struct drm_plane { + struct drm_device *dev; + struct list_head head; + + struct drm_mode_object base; + + uint32_t possible_crtcs; + uint32_t *format_types; + uint32_t format_count; + + struct drm_crtc *crtc; + struct drm_framebuffer *fb; + + /* CRTC gamma size for reporting to userspace */ + uint32_t gamma_size; + uint16_t *gamma_store; + + bool enabled; + + const struct drm_plane_funcs *funcs; + void *helper_private; +}; + +/** + * drm_mode_set - new values for a CRTC config change + * @head: list management + * @fb: framebuffer to use for new config + * @crtc: CRTC whose configuration we're about to change + * @mode: mode timings to use + * @x: position of this CRTC relative to @fb + * @y: position of this CRTC relative to @fb + * @connectors: array of connectors to drive with this CRTC if possible + * @num_connectors: size of @connectors array * * Represents a single crtc the connectors that it drives with what mode * and from which framebuffer it scans out from. @@ -558,13 +677,33 @@ struct drm_mode_set { }; /** - * struct drm_mode_config_funcs - configure CRTCs for a given screen layout + * struct drm_mode_config_funcs - basic driver provided mode setting functions + * @fb_create: create a new framebuffer object + * @output_poll_changed: function to handle output configuration changes + * + * Some global (i.e. not per-CRTC, connector, etc) mode setting functions that + * involve drivers. */ struct drm_mode_config_funcs { - struct drm_framebuffer *(*fb_create)(struct drm_device *dev, struct drm_file *file_priv, struct drm_mode_fb_cmd *mode_cmd); + struct drm_framebuffer *(*fb_create)(struct drm_device *dev, + struct drm_file *file_priv, + struct drm_mode_fb_cmd2 *mode_cmd); void (*output_poll_changed)(struct drm_device *dev); }; +/** + * drm_mode_group - group of mode setting resources for potential sub-grouping + * @num_crtcs: CRTC count + * @num_encoders: encoder count + * @num_connectors: connector count + * @id_list: list of KMS object IDs in this group + * + * Currently this simply tracks the global mode setting state. But in the + * future it could allow groups of objects to be set aside into independent + * control groups for use by different user level processes (e.g. two X servers + * running simultaneously on different heads, each with their own mode + * configuration and freedom of mode setting). + */ struct drm_mode_group { uint32_t num_crtcs; uint32_t num_encoders; @@ -576,7 +715,30 @@ struct drm_mode_group { /** * drm_mode_config - Mode configuration control structure + * @mutex: mutex protecting KMS related lists and structures + * @idr_mutex: mutex for KMS ID allocation and management + * @crtc_idr: main KMS ID tracking object + * @num_fb: number of fbs available + * @fb_list: list of framebuffers available + * @num_connector: number of connectors on this device + * @connector_list: list of connector objects + * @num_encoder: number of encoders on this device + * @encoder_list: list of encoder objects + * @num_crtc: number of CRTCs on this device + * @crtc_list: list of CRTC objects + * @min_width: minimum pixel width on this device + * @min_height: minimum pixel height on this device + * @max_width: maximum pixel width on this device + * @max_height: maximum pixel height on this device + * @funcs: core driver provided mode setting functions + * @fb_base: base address of the framebuffer + * @poll_enabled: track polling status for this device + * @output_poll_work: delayed work for polling in process context + * @*_property: core property tracking * + * Core mode resource tracking structure. All CRTC, encoders, and connectors + * enumerated by the driver are added here, as are global properties. Some + * global restrictions are also here, e.g. dimension restrictions. */ struct drm_mode_config { struct mutex mutex; /* protects configuration (mode lists etc.) */ @@ -589,6 +751,8 @@ struct drm_mode_config { struct list_head connector_list; int num_encoder; struct list_head encoder_list; + int num_plane; + struct list_head plane_list; int num_crtc; struct list_head crtc_list; @@ -641,6 +805,7 @@ struct drm_mode_config { #define obj_to_fb(x) container_of(x, struct drm_framebuffer, base) #define obj_to_property(x) container_of(x, struct drm_property, base) #define obj_to_blob(x) container_of(x, struct drm_property_blob, base) +#define obj_to_plane(x) container_of(x, struct drm_plane, base) extern void drm_crtc_init(struct drm_device *dev, @@ -660,6 +825,14 @@ extern void drm_encoder_init(struct drm_device *dev, const struct drm_encoder_funcs *funcs, int encoder_type); +extern int drm_plane_init(struct drm_device *dev, + struct drm_plane *plane, + unsigned long possible_crtcs, + const struct drm_plane_funcs *funcs, + const uint32_t *formats, uint32_t format_count, + bool priv); +extern void drm_plane_cleanup(struct drm_plane *plane); + extern void drm_encoder_cleanup(struct drm_encoder *encoder); extern char *drm_get_connector_name(struct drm_connector *connector); @@ -753,17 +926,25 @@ extern struct drm_mode_object *drm_mode_object_find(struct drm_device *dev, /* IOCTLs */ extern int drm_mode_getresources(struct drm_device *dev, void *data, struct drm_file *file_priv); - +extern int drm_mode_getplane_res(struct drm_device *dev, void *data, + struct drm_file *file_priv); extern int drm_mode_getcrtc(struct drm_device *dev, void *data, struct drm_file *file_priv); extern int drm_mode_getconnector(struct drm_device *dev, void *data, struct drm_file *file_priv); extern int drm_mode_setcrtc(struct drm_device *dev, void *data, struct drm_file *file_priv); +extern int drm_mode_getplane(struct drm_device *dev, + void *data, struct drm_file *file_priv); +extern int drm_mode_setplane(struct drm_device *dev, + void *data, struct drm_file *file_priv); extern int drm_mode_cursor_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv); extern int drm_mode_addfb(struct drm_device *dev, void *data, struct drm_file *file_priv); +extern int drm_mode_addfb2(struct drm_device *dev, + void *data, struct drm_file *file_priv); +extern uint32_t drm_mode_legacy_fb_format(uint32_t bpp, uint32_t depth); extern int drm_mode_rmfb(struct drm_device *dev, void *data, struct drm_file *file_priv); extern int drm_mode_getfb(struct drm_device *dev, @@ -824,4 +1005,7 @@ extern int drm_mode_mmap_dumb_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv); extern int drm_mode_destroy_dumb_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv); + +extern void drm_fb_get_bpp_depth(uint32_t format, unsigned int *depth, + int *bpp); #endif /* __DRM_CRTC_H__ */ |