diff options
Diffstat (limited to 'include/drm')
| -rw-r--r-- | include/drm/drm_bridge.h | 192 |
1 files changed, 191 insertions, 1 deletions
diff --git a/include/drm/drm_bridge.h b/include/drm/drm_bridge.h index 38de129d5947..9d5d750973e9 100644 --- a/include/drm/drm_bridge.h +++ b/include/drm/drm_bridge.h @@ -23,8 +23,9 @@ #ifndef __DRM_BRIDGE_H__ #define __DRM_BRIDGE_H__ -#include <linux/list.h> #include <linux/ctype.h> +#include <linux/list.h> +#include <linux/mutex.h> #include <drm/drm_atomic.h> #include <drm/drm_encoder.h> @@ -33,7 +34,10 @@ struct drm_bridge; struct drm_bridge_timings; +struct drm_connector; struct drm_panel; +struct edid; +struct i2c_adapter; /** * struct drm_bridge_funcs - drm_bridge control functions @@ -497,6 +501,119 @@ struct drm_bridge_funcs { * giving the reason of the failure otherwise. */ struct drm_bridge_state *(*atomic_reset)(struct drm_bridge *bridge); + + /** + * @detect: + * + * Check if anything is attached to the bridge output. + * + * This callback is optional, if not implemented the bridge will be + * considered as always having a component attached to its output. + * Bridges that implement this callback shall set the + * DRM_BRIDGE_OP_DETECT flag in their &drm_bridge->ops. + * + * RETURNS: + * + * drm_connector_status indicating the bridge output status. + */ + enum drm_connector_status (*detect)(struct drm_bridge *bridge); + + /** + * @get_modes: + * + * Fill all modes currently valid for the sink into the &drm_connector + * with drm_mode_probed_add(). + * + * The @get_modes callback is mostly intended to support non-probeable + * displays such as many fixed panels. Bridges that support reading + * EDID shall leave @get_modes unimplemented and implement the + * &drm_bridge_funcs->get_edid callback instead. + * + * This callback is optional. Bridges that implement it shall set the + * DRM_BRIDGE_OP_MODES flag in their &drm_bridge->ops. + * + * The connector parameter shall be used for the sole purpose of + * filling modes, and shall not be stored internally by bridge drivers + * for future usage. + * + * RETURNS: + * + * The number of modes added by calling drm_mode_probed_add(). + */ + int (*get_modes)(struct drm_bridge *bridge, + struct drm_connector *connector); + + /** + * @get_edid: + * + * Read and parse the EDID data of the connected display. + * + * The @get_edid callback is the preferred way of reporting mode + * information for a display connected to the bridge output. Bridges + * that support reading EDID shall implement this callback and leave + * the @get_modes callback unimplemented. + * + * The caller of this operation shall first verify the output + * connection status and refrain from reading EDID from a disconnected + * output. + * + * This callback is optional. Bridges that implement it shall set the + * DRM_BRIDGE_OP_EDID flag in their &drm_bridge->ops. + * + * The connector parameter shall be used for the sole purpose of EDID + * retrieval and parsing, and shall not be stored internally by bridge + * drivers for future usage. + * + * RETURNS: + * + * An edid structure newly allocated with kmalloc() (or similar) on + * success, or NULL otherwise. The caller is responsible for freeing + * the returned edid structure with kfree(). + */ + struct edid *(*get_edid)(struct drm_bridge *bridge, + struct drm_connector *connector); + + /** + * @hpd_notify: + * + * Notify the bridge of hot plug detection. + * + * This callback is optional, it may be implemented by bridges that + * need to be notified of display connection or disconnection for + * internal reasons. One use case is to reset the internal state of CEC + * controllers for HDMI bridges. + */ + void (*hpd_notify)(struct drm_bridge *bridge, + enum drm_connector_status status); + + /** + * @hpd_enable: + * + * Enable hot plug detection. From now on the bridge shall call + * drm_bridge_hpd_notify() each time a change is detected in the output + * connection status, until hot plug detection gets disabled with + * @hpd_disable. + * + * This callback is optional and shall only be implemented by bridges + * that support hot-plug notification without polling. Bridges that + * implement it shall also implement the @hpd_disable callback and set + * the DRM_BRIDGE_OP_HPD flag in their &drm_bridge->ops. + */ + void (*hpd_enable)(struct drm_bridge *bridge); + + /** + * @hpd_disable: + * + * Disable hot plug detection. Once this function returns the bridge + * shall not call drm_bridge_hpd_notify() when a change in the output + * connection status occurs. + * + * This callback is optional and shall only be implemented by bridges + * that support hot-plug notification without polling. Bridges that + * implement it shall also implement the @hpd_enable callback and set + * the DRM_BRIDGE_OP_HPD flag in their &drm_bridge->ops. + */ + void (*hpd_disable)(struct drm_bridge *bridge); }; /** @@ -536,6 +653,39 @@ struct drm_bridge_timings { }; /** + * enum drm_bridge_ops - Bitmask of operations supported by the bridge + */ +enum drm_bridge_ops { + /** + * @DRM_BRIDGE_OP_DETECT: The bridge can detect displays connected to + * its output. Bridges that set this flag shall implement the + * &drm_bridge_funcs->detect callback. + */ + DRM_BRIDGE_OP_DETECT = BIT(0), + /** + * @DRM_BRIDGE_OP_EDID: The bridge can retrieve the EDID of the display + * connected to its output. Bridges that set this flag shall implement + * the &drm_bridge_funcs->get_edid callback. + */ + DRM_BRIDGE_OP_EDID = BIT(1), + /** + * @DRM_BRIDGE_OP_HPD: The bridge can detect hot-plug and hot-unplug + * without requiring polling. Bridges that set this flag shall + * implement the &drm_bridge_funcs->hpd_enable and + * &drm_bridge_funcs->hpd_disable callbacks if they support enabling + * and disabling hot-plug detection dynamically. + */ + DRM_BRIDGE_OP_HPD = BIT(2), + /** + * @DRM_BRIDGE_OP_MODES: The bridge can retrieve the modes supported + * by the display at its output. This does not include reading EDID + * which is separately covered by @DRM_BRIDGE_OP_EDID. Bridges that set + * this flag shall implement the &drm_bridge_funcs->get_modes callback. + */ + DRM_BRIDGE_OP_MODES = BIT(3), +}; + +/** * struct drm_bridge - central DRM bridge control structure */ struct drm_bridge { @@ -563,6 +713,33 @@ struct drm_bridge { const struct drm_bridge_funcs *funcs; /** @driver_private: pointer to the bridge driver's internal context */ void *driver_private; + /** @ops: bitmask of operations supported by the bridge */ + enum drm_bridge_ops ops; + /** + * @type: Type of the connection at the bridge output + * (DRM_MODE_CONNECTOR_*). For bridges at the end of this chain this + * identifies the type of connected display. + */ + int type; + /** + * @ddc: Associated I2C adapter for DDC access, if any. + */ + struct i2c_adapter *ddc; + /** private: */ + /** + * @hpd_mutex: Protects the @hpd_cb and @hpd_data fields. + */ + struct mutex hpd_mutex; + /** + * @hpd_cb: Hot plug detection callback, registered with + * drm_bridge_hpd_enable(). + */ + void (*hpd_cb)(void *data, enum drm_connector_status status); + /** + * @hpd_data: Private data passed to the Hot plug detection callback + * @hpd_cb. + */ + void *hpd_data; }; static inline struct drm_bridge * @@ -669,6 +846,19 @@ drm_atomic_helper_bridge_propagate_bus_fmt(struct drm_bridge *bridge, u32 output_fmt, unsigned int *num_input_fmts); +enum drm_connector_status drm_bridge_detect(struct drm_bridge *bridge); +int drm_bridge_get_modes(struct drm_bridge *bridge, + struct drm_connector *connector); +struct edid *drm_bridge_get_edid(struct drm_bridge *bridge, + struct drm_connector *connector); +void drm_bridge_hpd_enable(struct drm_bridge *bridge, + void (*cb)(void *data, + enum drm_connector_status status), + void *data); +void drm_bridge_hpd_disable(struct drm_bridge *bridge); +void drm_bridge_hpd_notify(struct drm_bridge *bridge, + enum drm_connector_status status); + #ifdef CONFIG_DRM_PANEL_BRIDGE struct drm_bridge *drm_panel_bridge_add(struct drm_panel *panel); struct drm_bridge *drm_panel_bridge_add_typed(struct drm_panel *panel, |