diff options
Diffstat (limited to 'include/linux')
103 files changed, 2641 insertions, 1510 deletions
diff --git a/include/linux/acpi.h b/include/linux/acpi.h index b46a5205ee7b..026c3c011dc0 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -41,7 +41,7 @@ #include <asm/acpi.h> -#ifdef CONFIG_ACPI_BOOT +#ifdef CONFIG_ACPI enum acpi_irq_model_id { ACPI_IRQ_MODEL_PIC = 0, @@ -429,23 +429,13 @@ extern int pci_mmcfg_config_num; extern int sbf_port ; -#else /*!CONFIG_ACPI_BOOT*/ +#else /* !CONFIG_ACPI */ #define acpi_mp_config 0 -static inline int acpi_boot_init(void) -{ - return 0; -} - -static inline int acpi_boot_table_init(void) -{ - return 0; -} +#endif /* !CONFIG_ACPI */ -#endif /*!CONFIG_ACPI_BOOT*/ - -unsigned int acpi_register_gsi (u32 gsi, int edge_level, int active_high_low); +int acpi_register_gsi (u32 gsi, int edge_level, int active_high_low); int acpi_gsi_to_irq (u32 gsi, unsigned int *irq); /* @@ -455,7 +445,7 @@ int acpi_gsi_to_irq (u32 gsi, unsigned int *irq); */ void acpi_unregister_gsi (u32 gsi); -#ifdef CONFIG_ACPI_PCI +#ifdef CONFIG_ACPI struct acpi_prt_entry { struct list_head node; @@ -489,7 +479,7 @@ struct acpi_pci_driver { int acpi_pci_register_driver(struct acpi_pci_driver *driver); void acpi_pci_unregister_driver(struct acpi_pci_driver *driver); -#endif /*CONFIG_ACPI_PCI*/ +#endif /* CONFIG_ACPI */ #ifdef CONFIG_ACPI_EC @@ -498,20 +488,9 @@ extern int ec_write(u8 addr, u8 val); #endif /*CONFIG_ACPI_EC*/ -#ifdef CONFIG_ACPI_INTERPRETER - extern int acpi_blacklisted(void); extern void acpi_bios_year(char *s); -#else /*!CONFIG_ACPI_INTERPRETER*/ - -static inline int acpi_blacklisted(void) -{ - return 0; -} - -#endif /*!CONFIG_ACPI_INTERPRETER*/ - #define ACPI_CSTATE_LIMIT_DEFINED /* for driver builds */ #ifdef CONFIG_ACPI @@ -549,5 +528,17 @@ static inline int acpi_get_pxm(acpi_handle handle) extern int pnpacpi_disabled; +#else /* CONFIG_ACPI */ + +static inline int acpi_boot_init(void) +{ + return 0; +} + +static inline int acpi_boot_table_init(void) +{ + return 0; +} + #endif /* CONFIG_ACPI */ #endif /*_LINUX_ACPI_H*/ diff --git a/include/linux/attribute_container.h b/include/linux/attribute_container.h index af1010b6dab7..93bfb0beb62a 100644 --- a/include/linux/attribute_container.h +++ b/include/linux/attribute_container.h @@ -11,10 +11,12 @@ #include <linux/device.h> #include <linux/list.h> +#include <linux/klist.h> +#include <linux/spinlock.h> struct attribute_container { struct list_head node; - struct list_head containers; + struct klist containers; struct class *class; struct class_device_attribute **attrs; int (*match)(struct attribute_container *, struct device *); @@ -62,12 +64,8 @@ int attribute_container_add_class_device_adapter(struct attribute_container *con struct class_device *classdev); void attribute_container_remove_attrs(struct class_device *classdev); void attribute_container_class_device_del(struct class_device *classdev); - - - - - - +struct attribute_container *attribute_container_classdev_to_container(struct class_device *); +struct class_device *attribute_container_find_class_device(struct attribute_container *, struct device *); struct class_device_attribute **attribute_container_classdev_to_attrs(const struct class_device *classdev); #endif diff --git a/include/linux/auxvec.h b/include/linux/auxvec.h new file mode 100644 index 000000000000..9a7b374c9fb4 --- /dev/null +++ b/include/linux/auxvec.h @@ -0,0 +1,31 @@ +#ifndef _LINUX_AUXVEC_H +#define _LINUX_AUXVEC_H + +#include <asm/auxvec.h> + +/* Symbolic values for the entries in the auxiliary table + put on the initial stack */ +#define AT_NULL 0 /* end of vector */ +#define AT_IGNORE 1 /* entry should be ignored */ +#define AT_EXECFD 2 /* file descriptor of program */ +#define AT_PHDR 3 /* program headers for program */ +#define AT_PHENT 4 /* size of program header entry */ +#define AT_PHNUM 5 /* number of program headers */ +#define AT_PAGESZ 6 /* system page size */ +#define AT_BASE 7 /* base address of interpreter */ +#define AT_FLAGS 8 /* flags */ +#define AT_ENTRY 9 /* entry point of program */ +#define AT_NOTELF 10 /* program is not ELF */ +#define AT_UID 11 /* real uid */ +#define AT_EUID 12 /* effective uid */ +#define AT_GID 13 /* real gid */ +#define AT_EGID 14 /* effective gid */ +#define AT_PLATFORM 15 /* string identifying CPU for optimizations */ +#define AT_HWCAP 16 /* arch dependent hints at CPU capabilities */ +#define AT_CLKTCK 17 /* frequency at which times() increments */ + +#define AT_SECURE 23 /* secure mode boolean */ + +#define AT_VECTOR_SIZE 42 /* Size of auxiliary table. */ + +#endif /* _LINUX_AUXVEC_H */ diff --git a/include/linux/bfs_fs.h b/include/linux/bfs_fs.h index f7f0913cd110..c1237aa92e38 100644 --- a/include/linux/bfs_fs.h +++ b/include/linux/bfs_fs.h @@ -14,8 +14,9 @@ #define BFS_INODES_PER_BLOCK 8 /* SVR4 vnode type values (bfs_inode->i_vtype) */ -#define BFS_VDIR 2 -#define BFS_VREG 1 +#define BFS_VDIR 2L +#define BFS_VREG 1L + /* BFS inode layout on disk */ struct bfs_inode { @@ -58,22 +59,22 @@ struct bfs_super_block { __u32 s_padding[118]; }; -#define BFS_NZFILESIZE(ip) \ - (((ip)->i_eoffset + 1) - (ip)->i_sblock * BFS_BSIZE) - -#define BFS_FILESIZE(ip) \ - ((ip)->i_sblock == 0 ? 0 : BFS_NZFILESIZE(ip)) - -#define BFS_FILEBLOCKS(ip) \ - ((ip)->i_sblock == 0 ? 0 : ((ip)->i_eblock + 1) - (ip)->i_sblock) #define BFS_OFF2INO(offset) \ ((((offset) - BFS_BSIZE) / sizeof(struct bfs_inode)) + BFS_ROOT_INO) #define BFS_INO2OFF(ino) \ ((__u32)(((ino) - BFS_ROOT_INO) * sizeof(struct bfs_inode)) + BFS_BSIZE) +#define BFS_NZFILESIZE(ip) \ + ((cpu_to_le32((ip)->i_eoffset) + 1) - cpu_to_le32((ip)->i_sblock) * BFS_BSIZE) + +#define BFS_FILESIZE(ip) \ + ((ip)->i_sblock == 0 ? 0 : BFS_NZFILESIZE(ip)) +#define BFS_FILEBLOCKS(ip) \ + ((ip)->i_sblock == 0 ? 0 : (cpu_to_le32((ip)->i_eblock) + 1) - cpu_to_le32((ip)->i_sblock)) #define BFS_UNCLEAN(bfs_sb, sb) \ - ((bfs_sb->s_from != -1) && (bfs_sb->s_to != -1) && !(sb->s_flags & MS_RDONLY)) + ((cpu_to_le32(bfs_sb->s_from) != -1) && (cpu_to_le32(bfs_sb->s_to) != -1) && !(sb->s_flags & MS_RDONLY)) + #endif /* _LINUX_BFS_FS_H */ diff --git a/include/linux/bio.h b/include/linux/bio.h index 36ef29fa0d8b..cdaf03a14a51 100644 --- a/include/linux/bio.h +++ b/include/linux/bio.h @@ -111,7 +111,6 @@ struct bio { void *bi_private; bio_destructor_t *bi_destructor; /* destructor */ - struct bio_set *bi_set; /* memory pools set */ }; /* @@ -280,6 +279,7 @@ extern void bioset_free(struct bio_set *); extern struct bio *bio_alloc(unsigned int __nocast, int); extern struct bio *bio_alloc_bioset(unsigned int __nocast, int, struct bio_set *); extern void bio_put(struct bio *); +extern void bio_free(struct bio *, struct bio_set *); extern void bio_endio(struct bio *, unsigned int, int); struct request_queue; @@ -295,7 +295,13 @@ extern int bio_add_page(struct bio *, struct page *, unsigned int,unsigned int); extern int bio_get_nr_vecs(struct block_device *); extern struct bio *bio_map_user(struct request_queue *, struct block_device *, unsigned long, unsigned int, int); +struct sg_iovec; +extern struct bio *bio_map_user_iov(struct request_queue *, + struct block_device *, + struct sg_iovec *, int, int); extern void bio_unmap_user(struct bio *); +extern struct bio *bio_map_kern(struct request_queue *, void *, unsigned int, + unsigned int); extern void bio_set_pages_dirty(struct bio *bio); extern void bio_check_pages_dirty(struct bio *bio); extern struct bio *bio_copy_user(struct request_queue *, unsigned long, unsigned int, int); diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 19bd8e7e11bf..aefa26fbae8a 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -563,10 +563,12 @@ extern void blk_sync_queue(struct request_queue *q); extern void __blk_stop_queue(request_queue_t *q); extern void blk_run_queue(request_queue_t *); extern void blk_queue_activity_fn(request_queue_t *, activity_fn *, void *); -extern struct request *blk_rq_map_user(request_queue_t *, int, void __user *, unsigned int); -extern int blk_rq_unmap_user(struct request *, struct bio *, unsigned int); -extern int blk_execute_rq(request_queue_t *, struct gendisk *, struct request *); - +extern int blk_rq_map_user(request_queue_t *, struct request *, void __user *, unsigned int); +extern int blk_rq_unmap_user(struct bio *, unsigned int); +extern int blk_rq_map_kern(request_queue_t *, struct request *, void *, unsigned int, unsigned int); +extern int blk_rq_map_user_iov(request_queue_t *, struct request *, struct sg_iovec *, int); +extern int blk_execute_rq(request_queue_t *, struct gendisk *, + struct request *, int); static inline request_queue_t *bdev_get_queue(struct block_device *bdev) { return bdev->bd_disk->queue; diff --git a/include/linux/capability.h b/include/linux/capability.h index 8d139f4acf23..6b4618902d3d 100644 --- a/include/linux/capability.h +++ b/include/linux/capability.h @@ -233,6 +233,7 @@ typedef __u32 kernel_cap_t; /* Allow enabling/disabling tagged queuing on SCSI controllers and sending arbitrary SCSI commands */ /* Allow setting encryption key on loopback filesystem */ +/* Allow setting zone reclaim policy */ #define CAP_SYS_ADMIN 21 diff --git a/include/linux/compat.h b/include/linux/compat.h index b58b7d6f2fdb..f9ca534787e2 100644 --- a/include/linux/compat.h +++ b/include/linux/compat.h @@ -18,6 +18,9 @@ #define compat_jiffies_to_clock_t(x) \ (((unsigned long)(x) * COMPAT_USER_HZ) / HZ) +typedef __compat_uid32_t compat_uid_t; +typedef __compat_gid32_t compat_gid_t; + struct rusage; struct compat_itimerspec { diff --git a/include/linux/cpuset.h b/include/linux/cpuset.h index 3438233305a3..24062a1dbf61 100644 --- a/include/linux/cpuset.h +++ b/include/linux/cpuset.h @@ -23,7 +23,8 @@ void cpuset_init_current_mems_allowed(void); void cpuset_update_current_mems_allowed(void); void cpuset_restrict_to_mems_allowed(unsigned long *nodes); int cpuset_zonelist_valid_mems_allowed(struct zonelist *zl); -int cpuset_zone_allowed(struct zone *z); +extern int cpuset_zone_allowed(struct zone *z, unsigned int __nocast gfp_mask); +extern int cpuset_excl_nodes_overlap(const struct task_struct *p); extern struct file_operations proc_cpuset_operations; extern char *cpuset_task_status_allowed(struct task_struct *task, char *buffer); @@ -48,7 +49,13 @@ static inline int cpuset_zonelist_valid_mems_allowed(struct zonelist *zl) return 1; } -static inline int cpuset_zone_allowed(struct zone *z) +static inline int cpuset_zone_allowed(struct zone *z, + unsigned int __nocast gfp_mask) +{ + return 1; +} + +static inline int cpuset_excl_nodes_overlap(const struct task_struct *p) { return 1; } diff --git a/include/linux/crc16.h b/include/linux/crc16.h new file mode 100644 index 000000000000..bdedf825b04a --- /dev/null +++ b/include/linux/crc16.h @@ -0,0 +1,44 @@ +/* + * crc16.h - CRC-16 routine + * + * Implements the standard CRC-16, as used with 1-wire devices: + * Width 16 + * Poly 0x8005 (x^16 + x^15 + x^2 + 1) + * Init 0 + * + * For 1-wire devices, the CRC is stored inverted, LSB-first + * + * Example buffer with the CRC attached: + * 31 32 33 34 35 36 37 38 39 C2 44 + * + * The CRC over a buffer with the CRC attached is 0xB001. + * So, if (crc16(0, buf, size) == 0xB001) then the buffer is valid. + * + * Refer to "Application Note 937: Book of iButton Standards" for details. + * http://www.maxim-ic.com/appnotes.cfm/appnote_number/937 + * + * Copyright (c) 2005 Ben Gardner <bgardner@wabtec.com> + * + * This source code is licensed under the GNU General Public License, + * Version 2. See the file COPYING for more details. + */ + +#ifndef __CRC16_H +#define __CRC16_H + +#include <linux/types.h> + +#define CRC16_INIT 0 +#define CRC16_VALID 0xb001 + +extern u16 const crc16_table[256]; + +extern u16 crc16(u16 crc, const u8 *buffer, size_t len); + +static inline u16 crc16_byte(u16 crc, const u8 data) +{ + return (crc >> 8) ^ crc16_table[(crc ^ data) & 0xff]; +} + +#endif /* __CRC16_H */ + diff --git a/include/linux/crypto.h b/include/linux/crypto.h index 5e2bcc636a02..3c89df6e7768 100644 --- a/include/linux/crypto.h +++ b/include/linux/crypto.h @@ -45,6 +45,7 @@ #define CRYPTO_TFM_MODE_CTR 0x00000008 #define CRYPTO_TFM_REQ_WEAK_KEY 0x00000100 +#define CRYPTO_TFM_REQ_MAY_SLEEP 0x00000200 #define CRYPTO_TFM_RES_WEAK_KEY 0x00100000 #define CRYPTO_TFM_RES_BAD_KEY_LEN 0x00200000 #define CRYPTO_TFM_RES_BAD_KEY_SCHED 0x00400000 diff --git a/include/linux/dcache.h b/include/linux/dcache.h index 50be290d24d2..ab04b4f9b0db 100644 --- a/include/linux/dcache.h +++ b/include/linux/dcache.h @@ -88,8 +88,9 @@ struct dentry { * negative */ /* * The next three fields are touched by __d_lookup. Place them here - * so they all fit in a 16-byte range, with 16-byte alignment. + * so they all fit in a cache line. */ + struct hlist_node d_hash; /* lookup hash list */ struct dentry *d_parent; /* parent directory */ struct qstr d_name; @@ -103,7 +104,6 @@ struct dentry { void *d_fsdata; /* fs-specific data */ struct rcu_head d_rcu; struct dcookie_struct *d_cookie; /* cookie, if any */ - struct hlist_node d_hash; /* lookup hash list */ int d_mounted; unsigned char d_iname[DNAME_INLINE_LEN_MIN]; /* small names */ }; diff --git a/include/linux/dccp.h b/include/linux/dccp.h index 007c290f74d4..8bf4bacb5051 100644 --- a/include/linux/dccp.h +++ b/include/linux/dccp.h @@ -432,7 +432,10 @@ struct dccp_sock { struct ccid *dccps_hc_rx_ccid; struct ccid *dccps_hc_tx_ccid; struct dccp_options_received dccps_options_received; + struct timeval dccps_epoch; enum dccp_role dccps_role:2; + __u8 dccps_hc_rx_insert_options:1; + __u8 dccps_hc_tx_insert_options:1; }; static inline struct dccp_sock *dccp_sk(const struct sock *sk) diff --git a/include/linux/dmi.h b/include/linux/dmi.h index 5e93e6dce9a4..c30175e8dec6 100644 --- a/include/linux/dmi.h +++ b/include/linux/dmi.h @@ -1,6 +1,8 @@ #ifndef __DMI_H__ #define __DMI_H__ +#include <linux/list.h> + enum dmi_field { DMI_NONE, DMI_BIOS_VENDOR, @@ -16,6 +18,24 @@ enum dmi_field { DMI_STRING_MAX, }; +enum dmi_device_type { + DMI_DEV_TYPE_ANY = 0, + DMI_DEV_TYPE_OTHER, + DMI_DEV_TYPE_UNKNOWN, + DMI_DEV_TYPE_VIDEO, + DMI_DEV_TYPE_SCSI, + DMI_DEV_TYPE_ETHERNET, + DMI_DEV_TYPE_TOKENRING, + DMI_DEV_TYPE_SOUND, + DMI_DEV_TYPE_IPMI = -1 +}; + +struct dmi_header { + u8 type; + u8 length; + u16 handle; +}; + /* * DMI callbacks for problem boards */ @@ -26,22 +46,32 @@ struct dmi_strmatch { struct dmi_system_id { int (*callback)(struct dmi_system_id *); - char *ident; + const char *ident; struct dmi_strmatch matches[4]; void *driver_data; }; -#define DMI_MATCH(a,b) { a, b } +#define DMI_MATCH(a, b) { a, b } + +struct dmi_device { + struct list_head list; + int type; + const char *name; + void *device_data; /* Type specific data */ +}; #if defined(CONFIG_X86) && !defined(CONFIG_X86_64) extern int dmi_check_system(struct dmi_system_id *list); extern char * dmi_get_system_info(int field); - +extern struct dmi_device * dmi_find_device(int type, const char *name, + struct dmi_device *from); #else static inline int dmi_check_system(struct dmi_system_id *list) { return 0; } static inline char * dmi_get_system_info(int field) { return NULL; } +static struct dmi_device * dmi_find_device(int type, const char *name, + struct dmi_device *from) { return NULL; } #endif diff --git a/include/linux/efi.h b/include/linux/efi.h index 73781ec165b4..c7c5dd316182 100644 --- a/include/linux/efi.h +++ b/include/linux/efi.h @@ -91,11 +91,6 @@ typedef struct { #define EFI_PAGE_SHIFT 12 -/* - * For current x86 implementations of EFI, there is - * additional padding in the mem descriptors. This is not - * the case in ia64. Need to have this fixed in the f/w. - */ typedef struct { u32 type; u32 pad; @@ -103,9 +98,6 @@ typedef struct { u64 virt_addr; u64 num_pages; u64 attribute; -#if defined (__i386__) - u64 pad1; -#endif } efi_memory_desc_t; typedef int (*efi_freemem_callback_t) (unsigned long start, unsigned long end, void *arg); @@ -240,10 +232,12 @@ typedef struct { } efi_system_table_t; struct efi_memory_map { - efi_memory_desc_t *phys_map; - efi_memory_desc_t *map; + void *phys_map; + void *map; + void *map_end; int nr_map; unsigned long desc_version; + unsigned long desc_size; }; /* diff --git a/include/linux/elf.h b/include/linux/elf.h index f5b3ba5a317d..ff955dbf510d 100644 --- a/include/linux/elf.h +++ b/include/linux/elf.h @@ -2,6 +2,7 @@ #define _LINUX_ELF_H #include <linux/types.h> +#include <linux/auxvec.h> #include <asm/elf.h> #ifndef elf_read_implies_exec @@ -158,29 +159,6 @@ typedef __s64 Elf64_Sxword; #define ELF64_ST_BIND(x) ELF_ST_BIND(x) #define ELF64_ST_TYPE(x) ELF_ST_TYPE(x) -/* Symbolic values for the entries in the auxiliary table - put on the initial stack */ -#define AT_NULL 0 /* end of vector */ -#define AT_IGNORE 1 /* entry should be ignored */ -#define AT_EXECFD 2 /* file descriptor of program */ -#define AT_PHDR 3 /* program headers for program */ -#define AT_PHENT 4 /* size of program header entry */ -#define AT_PHNUM 5 /* number of program headers */ -#define AT_PAGESZ 6 /* system page size */ -#define AT_BASE 7 /* base address of interpreter */ -#define AT_FLAGS 8 /* flags */ -#define AT_ENTRY 9 /* entry point of program */ -#define AT_NOTELF 10 /* program is not ELF */ -#define AT_UID 11 /* real uid */ -#define AT_EUID 12 /* effective uid */ -#define AT_GID 13 /* real gid */ -#define AT_EGID 14 /* effective gid */ -#define AT_PLATFORM 15 /* string identifying CPU for optimizations */ -#define AT_HWCAP 16 /* arch dependent hints at CPU capabilities */ -#define AT_CLKTCK 17 /* frequency at which times() increments */ - -#define AT_SECURE 23 /* secure mode boolean */ - typedef struct dynamic{ Elf32_Sword d_tag; union{ diff --git a/include/linux/ext2_fs.h b/include/linux/ext2_fs.h index a657130ba03a..f7bd1c7ebefb 100644 --- a/include/linux/ext2_fs.h +++ b/include/linux/ext2_fs.h @@ -313,6 +313,9 @@ struct ext2_inode { #define EXT2_MOUNT_XATTR_USER 0x004000 /* Extended user attributes */ #define EXT2_MOUNT_POSIX_ACL 0x008000 /* POSIX Access Control Lists */ #define EXT2_MOUNT_XIP 0x010000 /* Execute in place */ +#define EXT2_MOUNT_USRQUOTA 0x020000 /* user quota */ +#define EXT2_MOUNT_GRPQUOTA 0x040000 /* group quota */ + #define clear_opt(o, opt) o &= ~EXT2_MOUNT_##opt #define set_opt(o, opt) o |= EXT2_MOUNT_##opt diff --git a/include/linux/ext3_fs.h b/include/linux/ext3_fs.h index c16662836c58..c0272d73ab20 100644 --- a/include/linux/ext3_fs.h +++ b/include/linux/ext3_fs.h @@ -373,6 +373,8 @@ struct ext3_inode { #define EXT3_MOUNT_BARRIER 0x20000 /* Use block barriers */ #define EXT3_MOUNT_NOBH 0x40000 /* No bufferheads */ #define EXT3_MOUNT_QUOTA 0x80000 /* Some quota option set */ +#define EXT3_MOUNT_USRQUOTA 0x100000 /* "old" user quota */ +#define EXT3_MOUNT_GRPQUOTA 0x200000 /* "old" group quota */ /* Compatibility, for having both ext2_fs.h and ext3_fs.h included at once */ #ifndef _LINUX_EXT2_FS_H diff --git a/include/linux/fb.h b/include/linux/fb.h index bc24beeed971..82e39cd0c4fb 100644 --- a/include/linux/fb.h +++ b/include/linux/fb.h @@ -107,6 +107,8 @@ #define FB_ACCEL_NV_20 44 /* nVidia Arch 20 */ #define FB_ACCEL_NV_30 45 /* nVidia Arch 30 */ #define FB_ACCEL_NV_40 46 /* nVidia Arch 40 */ +#define FB_ACCEL_XGI_VOLARI_V 47 /* XGI Volari V3XT, V5, V8 */ +#define FB_ACCEL_XGI_VOLARI_Z 48 /* XGI Volari Z7 */ #define FB_ACCEL_NEOMAGIC_NM2070 90 /* NeoMagic NM2070 */ #define FB_ACCEL_NEOMAGIC_NM2090 91 /* NeoMagic NM2090 */ #define FB_ACCEL_NEOMAGIC_NM2093 92 /* NeoMagic NM2093 */ @@ -495,6 +497,9 @@ struct fb_cursor_user { #define FB_EVENT_BLANK 0x08 /* Private modelist is to be replaced */ #define FB_EVENT_NEW_MODELIST 0x09 +/* The resolution of the passed in fb_info about to change and + all vc's should be changed */ +#define FB_EVENT_MODE_CHANGE_ALL 0x0A struct fb_event { struct fb_info *info; @@ -820,13 +825,29 @@ extern void fb_pad_unaligned_buffer(u8 *dst, u32 d_pitch, u8 *src, u32 idx, u32 height, u32 shift_high, u32 shift_low, u32 mod); extern void fb_pad_aligned_buffer(u8 *dst, u32 d_pitch, u8 *src, u32 s_pitch, u32 height); extern void fb_set_suspend(struct fb_info *info, int state); -extern int fb_get_color_depth(struct fb_var_screeninfo *var); +extern int fb_get_color_depth(struct fb_var_screeninfo *var, + struct fb_fix_screeninfo *fix); extern int fb_get_options(char *name, char **option); extern int fb_new_modelist(struct fb_info *info); extern struct fb_info *registered_fb[FB_MAX]; extern int num_registered_fb; +static inline void __fb_pad_aligned_buffer(u8 *dst, u32 d_pitch, + u8 *src, u32 s_pitch, u32 height) +{ + int i, j; + + d_pitch -= s_pitch; + + for (i = height; i--; ) { + /* s_pitch is a few bytes at the most, memcpy is suboptimal */ + for (j = 0; j < s_pitch; j++) + *dst++ = *src++; + dst += d_pitch; + } +} + /* drivers/video/fbsysfs.c */ extern struct fb_info *framebuffer_alloc(size_t size, struct device *dev); extern void framebuffer_release(struct fb_info *info); @@ -856,8 +877,11 @@ extern int fb_get_mode(int flags, u32 val, struct fb_var_screeninfo *var, extern int fb_validate_mode(const struct fb_var_screeninfo *var, struct fb_info *info); extern int fb_parse_edid(unsigned char *edid, struct fb_var_screeninfo *var); -extern void fb_edid_to_monspecs(unsigned char *edid, struct fb_monspecs *specs); +extern const unsigned char *fb_firmware_edid(struct device *device); +extern void fb_edid_to_monspecs(unsigned char *edid, + struct fb_monspecs *specs); extern void fb_destroy_modedb(struct fb_videomode *modedb); +extern int fb_find_mode_cvt(struct fb_videomode *mode, int margins, int rb); /* drivers/video/modedb.c */ #define VESA_MODEDB_SIZE 34 diff --git a/include/linux/file.h b/include/linux/file.h index 5206beb9a80e..f5bbd4c508b3 100644 --- a/include/linux/file.h +++ b/include/linux/file.h @@ -9,6 +9,7 @@ #include <linux/posix_types.h> #include <linux/compiler.h> #include <linux/spinlock.h> +#include <linux/rcupdate.h> /* * The default fd array needs to be at least BITS_PER_LONG, @@ -16,23 +17,33 @@ */ #define NR_OPEN_DEFAULT BITS_PER_LONG +struct fdtable { + unsigned int max_fds; + int max_fdset; + int next_fd; + struct file ** fd; /* current fd array */ + fd_set *close_on_exec; + fd_set *open_fds; + struct rcu_head rcu; + struct files_struct *free_files; + struct fdtable *next; +}; + /* * Open file table structure */ struct files_struct { atomic_t count; spinlock_t file_lock; /* Protects all the below members. Nests inside tsk->alloc_lock */ - int max_fds; - int max_fdset; - int next_fd; - struct file ** fd; /* current fd array */ - fd_set *close_on_exec; - fd_set *open_fds; + struct fdtable *fdt; + struct fdtable fdtab; fd_set close_on_exec_init; fd_set open_fds_init; struct file * fd_array[NR_OPEN_DEFAULT]; }; +#define files_fdtable(files) (rcu_dereference((files)->fdt)) + extern void FASTCALL(__fput(struct file *)); extern void FASTCALL(fput(struct file *)); @@ -59,13 +70,16 @@ extern fd_set *alloc_fdset(int); extern void free_fdset(fd_set *, int); extern int expand_files(struct files_struct *, int nr); +extern void free_fdtable(struct fdtable *fdt); +extern void __init files_defer_init(void); static inline struct file * fcheck_files(struct files_struct *files, unsigned int fd) { struct file * file = NULL; + struct fdtable *fdt = files_fdtable(files); - if (fd < files->max_fds) - file = files->fd[fd]; + if (fd < fdt->max_fds) + file = rcu_dereference(fdt->fd[fd]); return file; } diff --git a/include/linux/firmware.h b/include/linux/firmware.h index 886255b69bb9..2063c0839d4f 100644 --- a/include/linux/firmware.h +++ b/include/linux/firmware.h @@ -3,6 +3,9 @@ #include <linux/module.h> #include <linux/types.h> #define FIRMWARE_NAME_MAX 30 +#define FW_ACTION_NOHOTPLUG 0 +#define FW_ACTION_HOTPLUG 1 + struct firmware { size_t size; u8 *data; @@ -11,7 +14,7 @@ struct device; int request_firmware(const struct firmware **fw, const char *name, struct device *device); int request_firmware_nowait( - struct module *module, + struct module *module, int hotplug, const char *name, struct device *device, void *context, void (*cont)(const struct firmware *fw, void *context)); diff --git a/include/linux/fs.h b/include/linux/fs.h index 67e6732d4fdc..7f61227827d7 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -9,6 +9,7 @@ #include <linux/config.h> #include <linux/limits.h> #include <linux/ioctl.h> +#include <linux/rcuref.h> /* * It's silly to have NR_OPEN bigger than NR_FILE, but you can change @@ -69,6 +70,7 @@ extern int dir_notify_enable; #define READ 0 #define WRITE 1 #define READA 2 /* read-ahead - don't block if no resources */ +#define SWRITE 3 /* for ll_rw_block() - wait for buffer lock */ #define SPECIAL 4 /* For non-blockdevice requests in request queue */ #define READ_SYNC (READ | (1 << BIO_RW_SYNC)) #define WRITE_SYNC (WRITE | (1 << BIO_RW_SYNC)) @@ -281,19 +283,9 @@ struct iattr { struct timespec ia_atime; struct timespec ia_mtime; struct timespec ia_ctime; - unsigned int ia_attr_flags; }; /* - * This is the inode attributes flag definitions - */ -#define ATTR_FLAG_SYNCRONOUS 1 /* Syncronous write */ -#define ATTR_FLAG_NOATIME 2 /* Don't update atime */ -#define ATTR_FLAG_APPEND 4 /* Append-only file */ -#define ATTR_FLAG_IMMUTABLE 8 /* Immutable file */ -#define ATTR_FLAG_NODIRATIME 16 /* Don't update atime for directory */ - -/* * Includes for diskquotas. */ #include <linux/quota.h> @@ -594,7 +586,6 @@ struct file { unsigned int f_uid, f_gid; struct file_ra_state f_ra; - size_t f_maxcount; unsigned long f_version; void *f_security; @@ -607,12 +598,13 @@ struct file { spinlock_t f_ep_lock; #endif /* #ifdef CONFIG_EPOLL */ struct address_space *f_mapping; + struct rcu_head f_rcuhead; }; extern spinlock_t files_lock; #define file_list_lock() spin_lock(&files_lock); #define file_list_unlock() spin_unlock(&files_lock); -#define get_file(x) atomic_inc(&(x)->f_count) +#define get_file(x) rcuref_inc(&(x)->f_count) #define file_count(x) atomic_read(&(x)->f_count) #define MAX_NON_LFS ((1UL<<31) - 1) @@ -1291,6 +1283,7 @@ static inline int break_lease(struct inode *inode, unsigned int mode) /* fs/open.c */ extern int do_truncate(struct dentry *, loff_t start); +extern long do_sys_open(const char __user *filename, int flags, int mode); extern struct file *filp_open(const char *, int, int); extern struct file * dentry_open(struct dentry *, struct vfsmount *, int); extern int filp_close(struct file *, fl_owner_t id); diff --git a/include/linux/fuse.h b/include/linux/fuse.h new file mode 100644 index 000000000000..acbeb96a3353 --- /dev/null +++ b/include/linux/fuse.h @@ -0,0 +1,259 @@ +/* + FUSE: Filesystem in Userspace + Copyright (C) 2001-2005 Miklos Szeredi <miklos@szeredi.hu> + + This program can be distributed under the terms of the GNU GPL. + See the file COPYING. +*/ + +/* This file defines the kernel interface of FUSE */ + +#include <asm/types.h> + +/** Version number of this interface */ +#define FUSE_KERNEL_VERSION 7 + +/** Minor version number of this interface */ +#define FUSE_KERNEL_MINOR_VERSION 2 + +/** The node ID of the root inode */ +#define FUSE_ROOT_ID 1 + +/** The major number of the fuse character device */ +#define FUSE_MAJOR 10 + +/** The minor number of the fuse character device */ +#define FUSE_MINOR 229 + +/* Make sure all structures are padded to 64bit boundary, so 32bit + userspace works under 64bit kernels */ + +struct fuse_attr { + __u64 ino; + __u64 size; + __u64 blocks; + __u64 atime; + __u64 mtime; + __u64 ctime; + __u32 atimensec; + __u32 mtimensec; + __u32 ctimensec; + __u32 mode; + __u32 nlink; + __u32 uid; + __u32 gid; + __u32 rdev; +}; + +struct fuse_kstatfs { + __u64 blocks; + __u64 bfree; + __u64 bavail; + __u64 files; + __u64 ffree; + __u32 bsize; + __u32 namelen; +}; + +#define FATTR_MODE (1 << 0) +#define FATTR_UID (1 << 1) +#define FATTR_GID (1 << 2) +#define FATTR_SIZE (1 << 3) +#define FATTR_ATIME (1 << 4) +#define FATTR_MTIME (1 << 5) +#define FATTR_CTIME (1 << 6) + +/** + * Flags returned by the OPEN request + * + * FOPEN_DIRECT_IO: bypass page cache for this open file + * FOPEN_KEEP_CACHE: don't invalidate the data cache on open + */ +#define FOPEN_DIRECT_IO (1 << 0) +#define FOPEN_KEEP_CACHE (1 << 1) + +enum fuse_opcode { + FUSE_LOOKUP = 1, + FUSE_FORGET = 2, /* no reply */ + FUSE_GETATTR = 3, + FUSE_SETATTR = 4, + FUSE_READLINK = 5, + FUSE_SYMLINK = 6, + FUSE_MKNOD = 8, + FUSE_MKDIR = 9, + FUSE_UNLINK = 10, + FUSE_RMDIR = 11, + FUSE_RENAME = 12, + FUSE_LINK = 13, + FUSE_OPEN = 14, + FUSE_READ = 15, + FUSE_WRITE = 16, + FUSE_STATFS = 17, + FUSE_RELEASE = 18, + FUSE_FSYNC = 20, + FUSE_SETXATTR = 21, + FUSE_GETXATTR = 22, + FUSE_LISTXATTR = 23, + FUSE_REMOVEXATTR = 24, + FUSE_FLUSH = 25, + FUSE_INIT = 26, + FUSE_OPENDIR = 27, + FUSE_READDIR = 28, + FUSE_RELEASEDIR = 29, + FUSE_FSYNCDIR = 30 +}; + +/* Conservative buffer size for the client */ +#define FUSE_MAX_IN 8192 + +#define FUSE_NAME_MAX 1024 +#define FUSE_SYMLINK_MAX 4096 +#define FUSE_XATTR_SIZE_MAX 4096 + +struct fuse_entry_out { + __u64 nodeid; /* Inode ID */ + __u64 generation; /* Inode generation: nodeid:gen must + be unique for the fs's lifetime */ + __u64 entry_valid; /* Cache timeout for the name */ + __u64 attr_valid; /* Cache timeout for the attributes */ + __u32 entry_valid_nsec; + __u32 attr_valid_nsec; + struct fuse_attr attr; +}; + +struct fuse_forget_in { + __u64 nlookup; +}; + +struct fuse_attr_out { + __u64 attr_valid; /* Cache timeout for the attributes */ + __u32 attr_valid_nsec; + __u32 dummy; + struct fuse_attr attr; +}; + +struct fuse_mknod_in { + __u32 mode; + __u32 rdev; +}; + +struct fuse_mkdir_in { + __u32 mode; + __u32 padding; +}; + +struct fuse_rename_in { + __u64 newdir; +}; + +struct fuse_link_in { + __u64 oldnodeid; +}; + +struct fuse_setattr_in { + __u32 valid; + __u32 padding; + struct fuse_attr attr; +}; + +struct fuse_open_in { + __u32 flags; + __u32 padding; +}; + +struct fuse_open_out { + __u64 fh; + __u32 open_flags; + __u32 padding; +}; + +struct fuse_release_in { + __u64 fh; + __u32 flags; + __u32 padding; +}; + +struct fuse_flush_in { + __u64 fh; + __u32 flush_flags; + __u32 padding; +}; + +struct fuse_read_in { + __u64 fh; + __u64 offset; + __u32 size; + __u32 padding; +}; + +struct fuse_write_in { + __u64 fh; + __u64 offset; + __u32 size; + __u32 write_flags; +}; + +struct fuse_write_out { + __u32 size; + __u32 padding; +}; + +struct fuse_statfs_out { + struct fuse_kstatfs st; +}; + +struct fuse_fsync_in { + __u64 fh; + __u32 fsync_flags; + __u32 padding; +}; + +struct fuse_setxattr_in { + __u32 size; + __u32 flags; +}; + +struct fuse_getxattr_in { + __u32 size; + __u32 padding; +}; + +struct fuse_getxattr_out { + __u32 size; + __u32 padding; +}; + +struct fuse_init_in_out { + __u32 major; + __u32 minor; +}; + +struct fuse_in_header { + __u32 len; + __u32 opcode; + __u64 unique; + __u64 nodeid; + __u32 uid; + __u32 gid; + __u32 pid; + __u32 padding; +}; + +struct fuse_out_header { + __u32 len; + __s32 error; + __u64 unique; +}; + +struct fuse_dirent { + __u64 ino; + __u64 off; + __u32 namelen; + __u32 type; + char name[0]; +}; + +#define FUSE_NAME_OFFSET ((unsigned) ((struct fuse_dirent *) 0)->name) +#define FUSE_DIRENT_ALIGN(x) (((x) + sizeof(__u64) - 1) & ~(sizeof(__u64) - 1)) +#define FUSE_DIRENT_SIZE(d) \ + FUSE_DIRENT_ALIGN(FUSE_NAME_OFFSET + (d)->namelen) diff --git a/include/linux/futex.h b/include/linux/futex.h index 65d6cfdb6d39..10f96c31971e 100644 --- a/include/linux/futex.h +++ b/include/linux/futex.h @@ -4,14 +4,40 @@ /* Second argument to futex syscall */ -#define FUTEX_WAIT (0) -#define FUTEX_WAKE (1) -#define FUTEX_FD (2) -#define FUTEX_REQUEUE (3) -#define FUTEX_CMP_REQUEUE (4) +#define FUTEX_WAIT 0 +#define FUTEX_WAKE 1 +#define FUTEX_FD 2 +#define FUTEX_REQUEUE 3 +#define FUTEX_CMP_REQUEUE 4 +#define FUTEX_WAKE_OP 5 long do_futex(unsigned long uaddr, int op, int val, unsigned long timeout, unsigned long uaddr2, int val2, int val3); +#define FUTEX_OP_SET 0 /* *(int *)UADDR2 = OPARG; */ +#define FUTEX_OP_ADD 1 /* *(int *)UADDR2 += OPARG; */ +#define FUTEX_OP_OR 2 /* *(int *)UADDR2 |= OPARG; */ +#define FUTEX_OP_ANDN 3 /* *(int *)UADDR2 &= ~OPARG; */ +#define FUTEX_OP_XOR 4 /* *(int *)UADDR2 ^= OPARG; */ + +#define FUTEX_OP_OPARG_SHIFT 8 /* Use (1 << OPARG) instead of OPARG. */ + +#define FUTEX_OP_CMP_EQ 0 /* if (oldval == CMPARG) wake */ +#define FUTEX_OP_CMP_NE 1 /* if (oldval != CMPARG) wake */ +#define FUTEX_OP_CMP_LT 2 /* if (oldval < CMPARG) wake */ +#define FUTEX_OP_CMP_LE 3 /* if (oldval <= CMPARG) wake */ +#define FUTEX_OP_CMP_GT 4 /* if (oldval > CMPARG) wake */ +#define FUTEX_OP_CMP_GE 5 /* if (oldval >= CMPARG) wake */ + +/* FUTEX_WAKE_OP will perform atomically + int oldval = *(int *)UADDR2; + *(int *)UADDR2 = oldval OP OPARG; + if (oldval CMP CMPARG) + wake UADDR2; */ + +#define FUTEX_OP(op, oparg, cmp, cmparg) \ + (((op & 0xf) << 28) | ((cmp & 0xf) << 24) \ + | ((oparg & 0xfff) << 12) | (cmparg & 0xfff)) + #endif diff --git a/include/linux/gfp.h b/include/linux/gfp.h index 7c7400137e97..4dc990f3b5cc 100644 --- a/include/linux/gfp.h +++ b/include/linux/gfp.h @@ -40,6 +40,7 @@ struct vm_area_struct; #define __GFP_ZERO 0x8000u /* Return zeroed page on success */ #define __GFP_NOMEMALLOC 0x10000u /* Don't use emergency reserves */ #define __GFP_NORECLAIM 0x20000u /* No realy zone reclaim during allocation */ +#define __GFP_HARDWALL 0x40000u /* Enforce hardwall cpuset memory allocs */ #define __GFP_BITS_SHIFT 20 /* Room for 20 __GFP_FOO bits */ #define __GFP_BITS_MASK ((1 << __GFP_BITS_SHIFT) - 1) @@ -48,14 +49,15 @@ struct vm_area_struct; #define GFP_LEVEL_MASK (__GFP_WAIT|__GFP_HIGH|__GFP_IO|__GFP_FS| \ __GFP_COLD|__GFP_NOWARN|__GFP_REPEAT| \ __GFP_NOFAIL|__GFP_NORETRY|__GFP_NO_GROW|__GFP_COMP| \ - __GFP_NOMEMALLOC|__GFP_NORECLAIM) + __GFP_NOMEMALLOC|__GFP_NORECLAIM|__GFP_HARDWALL) #define GFP_ATOMIC (__GFP_HIGH) #define GFP_NOIO (__GFP_WAIT) #define GFP_NOFS (__GFP_WAIT | __GFP_IO) #define GFP_KERNEL (__GFP_WAIT | __GFP_IO | __GFP_FS) -#define GFP_USER (__GFP_WAIT | __GFP_IO | __GFP_FS) -#define GFP_HIGHUSER (__GFP_WAIT | __GFP_IO | __GFP_FS | __GFP_HIGHMEM) +#define GFP_USER (__GFP_WAIT | __GFP_IO | __GFP_FS | __GFP_HARDWALL) +#define GFP_HIGHUSER (__GFP_WAIT | __GFP_IO | __GFP_FS | __GFP_HARDWALL | \ + __GFP_HIGHMEM) /* Flag - indicates that the buffer will be suitable for DMA. Ignored on some platforms, used as appropriate on others */ diff --git a/include/linux/hugetlb.h b/include/linux/hugetlb.h index f529d1442815..e670b0d13fe0 100644 --- a/include/linux/hugetlb.h +++ b/include/linux/hugetlb.h @@ -70,12 +70,6 @@ pte_t huge_ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, void hugetlb_prefault_arch_hook(struct mm_struct *mm); #endif -#ifndef ARCH_HAS_HUGETLB_CLEAN_STALE_PGTABLE -#define hugetlb_clean_stale_pgtable(pte) BUG() -#else -void hugetlb_clean_stale_pgtable(pte_t *pte); -#endif - #else /* !CONFIG_HUGETLB_PAGE */ static inline int is_vm_hugetlb_page(struct vm_area_struct *vma) diff --git a/include/linux/hwmon-sysfs.h b/include/linux/hwmon-sysfs.h index 1b5018a965f5..7eb4004b3601 100644 --- a/include/linux/hwmon-sysfs.h +++ b/include/linux/hwmon-sysfs.h @@ -33,4 +33,19 @@ struct sensor_device_attribute sensor_dev_attr_##_name = { \ .index = _index, \ } +struct sensor_device_attribute_2 { + struct device_attribute dev_attr; + u8 index; + u8 nr; +}; +#define to_sensor_dev_attr_2(_dev_attr) \ + container_of(_dev_attr, struct sensor_device_attribute_2, dev_attr) + +#define SENSOR_DEVICE_ATTR_2(_name,_mode,_show,_store,_nr,_index) \ +struct sensor_device_attribute_2 sensor_dev_attr_##_name = { \ + .dev_attr = __ATTR(_name,_mode,_show,_store), \ + .index = _index, \ + .nr = _nr, \ +} + #endif /* _LINUX_HWMON_SYSFS_H */ diff --git a/include/linux/hwmon-vid.h b/include/linux/hwmon-vid.h new file mode 100644 index 000000000000..cd4b7a042b86 --- /dev/null +++ b/include/linux/hwmon-vid.h @@ -0,0 +1,45 @@ +/* + hwmon-vid.h - VID/VRM/VRD voltage conversions + + Originally part of lm_sensors + Copyright (c) 2002 Mark D. Studebaker <mdsxyz123@yahoo.com> + With assistance from Trent Piepho <xyzzy@speakeasy.org> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef _LINUX_HWMON_VID_H +#define _LINUX_HWMON_VID_H + +int vid_from_reg(int val, int vrm); +int vid_which_vrm(void); + +/* vrm is the VRM/VRD document version multiplied by 10. + val is in mV to avoid floating point in the kernel. + Returned value is the 4-, 5- or 6-bit VID code. + Note that only VRM 9.x is supported for now. */ +static inline int vid_to_reg(int val, int vrm) +{ + switch (vrm) { + case 91: /* VRM 9.1 */ + case 90: /* VRM 9.0 */ + return ((val >= 1100) && (val <= 1850) ? + ((18499 - val * 10) / 25 + 5) / 10 : -1); + default: + return -1; + } +} + +#endif /* _LINUX_HWMON_VID_H */ diff --git a/include/linux/hwmon.h b/include/linux/hwmon.h new file mode 100644 index 000000000000..0efd994c37f1 --- /dev/null +++ b/include/linux/hwmon.h @@ -0,0 +1,35 @@ +/* + hwmon.h - part of lm_sensors, Linux kernel modules for hardware monitoring + + This file declares helper functions for the sysfs class "hwmon", + for use by sensors drivers. + + Copyright (C) 2005 Mark M. Hoffman <mhoffman@lightlink.com> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; version 2 of the License. +*/ + +#ifndef _HWMON_H_ +#define _HWMON_H_ + +#include <linux/device.h> + +struct class_device *hwmon_device_register(struct device *dev); + +void hwmon_device_unregister(struct class_device *cdev); + +/* Scale user input to sensible values */ +static inline int SENSORS_LIMIT(long value, long low, long high) +{ + if (value < low) + return low; + else if (value > high) + return high; + else + return value; +} + +#endif + diff --git a/include/linux/i2c-id.h b/include/linux/i2c-id.h index 33f08258f22b..44f30876a1c9 100644 --- a/include/linux/i2c-id.h +++ b/include/linux/i2c-id.h @@ -1,6 +1,6 @@ /* ------------------------------------------------------------------------- */ /* */ -/* i2c.h - definitions for the i2c-bus interface */ +/* i2c-id.h - identifier values for i2c drivers and adapters */ /* */ /* ------------------------------------------------------------------------- */ /* Copyright (C) 1995-1999 Simon G. Vogl @@ -24,16 +24,6 @@ #define LINUX_I2C_ID_H /* - * This file is part of the i2c-bus package and contains the identifier - * values for drivers, adapters and other folk populating these serial - * worlds. - * - * These will change often (i.e. additions) , therefore this has been - * separated from the functional interface definitions of the i2c api. - * - */ - -/* * ---- Driver types ----------------------------------------------------- * device id name + number function description, i2c address(es) * @@ -170,151 +160,113 @@ /* * ---- Adapter types ---------------------------------------------------- - * - * First, we distinguish between several algorithms to access the hardware - * interface types, as a PCF 8584 needs other care than a bit adapter. - */ - -#define I2C_ALGO_NONE 0x000000 -#define I2C_ALGO_BIT 0x010000 /* bit style adapters */ -#define I2C_ALGO_PCF 0x020000 /* PCF 8584 style adapters */ -#define I2C_ALGO_ATI 0x030000 /* ATI video card */ -#define I2C_ALGO_SMBUS 0x040000 -#define I2C_ALGO_ISA 0x050000 /* lm_sensors ISA pseudo-adapter */ -#define I2C_ALGO_SAA7146 0x060000 /* SAA 7146 video decoder bus */ -#define I2C_ALGO_ACB 0x070000 /* ACCESS.bus algorithm */ -#define I2C_ALGO_IIC 0x080000 /* ITE IIC bus */ -#define I2C_ALGO_SAA7134 0x090000 -#define I2C_ALGO_MPC824X 0x0a0000 /* Motorola 8240 / 8245 */ -#define I2C_ALGO_IPMI 0x0b0000 /* IPMI dummy adapter */ -#define I2C_ALGO_IPMB 0x0c0000 /* IPMB adapter */ -#define I2C_ALGO_MPC107 0x0d0000 -#define I2C_ALGO_EC 0x100000 /* ACPI embedded controller */ - -#define I2C_ALGO_MPC8XX 0x110000 /* MPC8xx PowerPC I2C algorithm */ -#define I2C_ALGO_OCP 0x120000 /* IBM or otherwise On-chip I2C algorithm */ -#define I2C_ALGO_BITHS 0x130000 /* enhanced bit style adapters */ -#define I2C_ALGO_IOP3XX 0x140000 /* XSCALE IOP3XX On-chip I2C alg */ -#define I2C_ALGO_SIBYTE 0x150000 /* Broadcom SiByte SOCs */ -#define I2C_ALGO_SGI 0x160000 /* SGI algorithm */ - -#define I2C_ALGO_USB 0x170000 /* USB algorithm */ -#define I2C_ALGO_VIRT 0x180000 /* Virtual bus adapter */ - -#define I2C_ALGO_MV64XXX 0x190000 /* Marvell mv64xxx i2c ctlr */ -#define I2C_ALGO_PCA 0x1a0000 /* PCA 9564 style adapters */ -#define I2C_ALGO_AU1550 0x1b0000 /* Au1550 PSC algorithm */ - -#define I2C_ALGO_EXP 0x800000 /* experimental */ - -#define I2C_ALGO_MASK 0xff0000 /* Mask for algorithms */ -#define I2C_ALGO_SHIFT 0x10 /* right shift to get index values */ - -#define I2C_HW_ADAPS 0x10000 /* # adapter types */ -#define I2C_HW_MASK 0xffff - - -/* hw specific modules that are defined per algorithm layer */ /* --- Bit algorithm adapters */ -#define I2C_HW_B_LP 0x00 /* Parallel port Philips style adapter */ -#define I2C_HW_B_LPC 0x01 /* Parallel port, over control reg. */ -#define I2C_HW_B_SER 0x02 /* Serial line interface */ -#define I2C_HW_B_ELV 0x03 /* ELV Card */ -#define I2C_HW_B_VELLE 0x04 /* Vellemann K8000 */ -#define I2C_HW_B_BT848 0x05 /* BT848 video boards */ -#define I2C_HW_B_WNV 0x06 /* Winnov Videums */ -#define I2C_HW_B_VIA 0x07 /* Via vt82c586b */ -#define I2C_HW_B_HYDRA 0x08 /* Apple Hydra Mac I/O */ -#define I2C_HW_B_G400 0x09 /* Matrox G400 */ -#define I2C_HW_B_I810 0x0a /* Intel I810 */ -#define I2C_HW_B_VOO 0x0b /* 3dfx Voodoo 3 / Banshee */ -#define I2C_HW_B_PPORT 0x0c /* Primitive parallel port adapter */ -#define I2C_HW_B_SAVG 0x0d /* Savage 4 */ -#define I2C_HW_B_SCX200 0x0e /* Nat'l Semi SCx200 I2C */ -#define I2C_HW_B_RIVA 0x10 /* Riva based graphics cards */ -#define I2C_HW_B_IOC 0x11 /* IOC bit-wiggling */ -#define I2C_HW_B_TSUNA 0x12 /* DEC Tsunami chipset */ -#define I2C_HW_B_FRODO 0x13 /* 2d3D, Inc. SA-1110 Development Board */ -#define I2C_HW_B_OMAHA 0x14 /* Omaha I2C interface (ARM) */ -#define I2C_HW_B_GUIDE 0x15 /* Guide bit-basher */ -#define I2C_HW_B_IXP2000 0x16 /* GPIO on IXP2000 systems */ -#define I2C_HW_B_IXP4XX 0x17 /* GPIO on IXP4XX systems */ -#define I2C_HW_B_S3VIA 0x18 /* S3Via ProSavage adapter */ -#define I2C_HW_B_ZR36067 0x19 /* Zoran-36057/36067 based boards */ -#define I2C_HW_B_PCILYNX 0x1a /* TI PCILynx I2C adapter */ -#define I2C_HW_B_CX2388x 0x1b /* connexant 2388x based tv cards */ +#define I2C_HW_B_LP 0x010000 /* Parallel port Philips style */ +#define I2C_HW_B_LPC 0x010001 /* Parallel port control reg. */ +#define I2C_HW_B_SER 0x010002 /* Serial line interface */ +#define I2C_HW_B_ELV 0x010003 /* ELV Card */ +#define I2C_HW_B_VELLE 0x010004 /* Vellemann K8000 */ +#define I2C_HW_B_BT848 0x010005 /* BT848 video boards */ +#define I2C_HW_B_WNV 0x010006 /* Winnov Videums */ +#define I2C_HW_B_VIA 0x010007 /* Via vt82c586b */ +#define I2C_HW_B_HYDRA 0x010008 /* Apple Hydra Mac I/O */ +#define I2C_HW_B_G400 0x010009 /* Matrox G400 */ +#define I2C_HW_B_I810 0x01000a /* Intel I810 */ +#define I2C_HW_B_VOO 0x01000b /* 3dfx Voodoo 3 / Banshee */ +#define I2C_HW_B_PPORT 0x01000c /* Primitive parallel port adapter */ +#define I2C_HW_B_SAVG 0x01000d /* Savage 4 */ +#define I2C_HW_B_SCX200 0x01000e /* Nat'l Semi SCx200 I2C */ +#define I2C_HW_B_RIVA 0x010010 /* Riva based graphics cards */ +#define I2C_HW_B_IOC 0x010011 /* IOC bit-wiggling */ +#define I2C_HW_B_TSUNA 0x010012 /* DEC Tsunami chipset */ +#define I2C_HW_B_FRODO 0x010013 /* 2d3D SA-1110 Development Board */ +#define I2C_HW_B_OMAHA 0x010014 /* Omaha I2C interface (ARM) */ +#define I2C_HW_B_GUIDE 0x010015 /* Guide bit-basher */ +#define I2C_HW_B_IXP2000 0x010016 /* GPIO on IXP2000 systems */ +#define I2C_HW_B_IXP4XX 0x010017 /* GPIO on IXP4XX systems */ +#define I2C_HW_B_S3VIA 0x010018 /* S3Via ProSavage adapter */ +#define I2C_HW_B_ZR36067 0x010019 /* Zoran-36057/36067 based boards */ +#define I2C_HW_B_PCILYNX 0x01001a /* TI PCILynx I2C adapter */ +#define I2C_HW_B_CX2388x 0x01001b /* connexant 2388x based tv cards */ +#define I2C_HW_B_NVIDIA 0x01001c /* nvidia framebuffer driver */ +#define I2C_HW_B_SAVAGE 0x01001d /* savage framebuffer driver */ +#define I2C_HW_B_RADEON 0x01001e /* radeon framebuffer driver */ /* --- PCF 8584 based algorithms */ -#define I2C_HW_P_LP 0x00 /* Parallel port interface */ -#define I2C_HW_P_ISA 0x01 /* generic ISA Bus inteface card */ -#define I2C_HW_P_ELEK 0x02 /* Elektor ISA Bus inteface card */ +#define I2C_HW_P_LP 0x020000 /* Parallel port interface */ +#define I2C_HW_P_ISA 0x020001 /* generic ISA Bus inteface card */ +#define I2C_HW_P_ELEK 0x020002 /* Elektor ISA Bus inteface card */ /* --- PCA 9564 based algorithms */ -#define I2C_HW_A_ISA 0x00 /* generic ISA Bus interface card */ +#define I2C_HW_A_ISA 0x1a0000 /* generic ISA Bus interface card */ /* --- ACPI Embedded controller algorithms */ -#define I2C_HW_ACPI_EC 0x00 +#define I2C_HW_ACPI_EC 0x1f0000 /* --- MPC824x PowerPC adapters */ -#define I2C_HW_MPC824X 0x00 /* Motorola 8240 / 8245 */ +#define I2C_HW_MPC824X 0x100001 /* Motorola 8240 / 8245 */ /* --- MPC8xx PowerPC adapters */ -#define I2C_HW_MPC8XX_EPON 0x00 /* Eponymous MPC8xx I2C adapter */ +#define I2C_HW_MPC8XX_EPON 0x110000 /* Eponymous MPC8xx I2C adapter */ /* --- ITE based algorithms */ -#define I2C_HW_I_IIC 0x00 /* controller on the ITE */ +#define I2C_HW_I_IIC 0x080000 /* controller on the ITE */ /* --- PowerPC on-chip adapters */ -#define I2C_HW_OCP 0x00 /* IBM on-chip I2C adapter */ +#define I2C_HW_OCP 0x120000 /* IBM on-chip I2C adapter */ /* --- Broadcom SiByte adapters */ -#define I2C_HW_SIBYTE 0x00 +#define I2C_HW_SIBYTE 0x150000 /* --- SGI adapters */ -#define I2C_HW_SGI_VINO 0x00 -#define I2C_HW_SGI_MACE 0x01 +#define I2C_HW_SGI_VINO 0x160000 +#define I2C_HW_SGI_MACE 0x160001 /* --- XSCALE on-chip adapters */ -#define I2C_HW_IOP3XX 0x00 +#define I2C_HW_IOP3XX 0x140000 /* --- Au1550 PSC adapters adapters */ -#define I2C_HW_AU1550_PSC 0x00 +#define I2C_HW_AU1550_PSC 0x1b0000 /* --- SMBus only adapters */ -#define I2C_HW_SMBUS_PIIX4 0x00 -#define I2C_HW_SMBUS_ALI15X3 0x01 -#define I2C_HW_SMBUS_VIA2 0x02 -#define I2C_HW_SMBUS_VOODOO3 0x03 -#define I2C_HW_SMBUS_I801 0x04 -#define I2C_HW_SMBUS_AMD756 0x05 -#define I2C_HW_SMBUS_SIS5595 0x06 -#define I2C_HW_SMBUS_ALI1535 0x07 -#define I2C_HW_SMBUS_SIS630 0x08 -#define I2C_HW_SMBUS_SIS96X 0x09 -#define I2C_HW_SMBUS_AMD8111 0x0a -#define I2C_HW_SMBUS_SCX200 0x0b -#define I2C_HW_SMBUS_NFORCE2 0x0c -#define I2C_HW_SMBUS_W9968CF 0x0d -#define I2C_HW_SMBUS_OV511 0x0e /* OV511(+) USB 1.1 webcam ICs */ -#define I2C_HW_SMBUS_OV518 0x0f /* OV518(+) USB 1.1 webcam ICs */ -#define I2C_HW_SMBUS_OV519 0x10 /* OV519 USB 1.1 webcam IC */ -#define I2C_HW_SMBUS_OVFX2 0x11 /* Cypress/OmniVision FX2 webcam */ +#define I2C_HW_SMBUS_PIIX4 0x040000 +#define I2C_HW_SMBUS_ALI15X3 0x040001 +#define I2C_HW_SMBUS_VIA2 0x040002 +#define I2C_HW_SMBUS_VOODOO3 0x040003 +#define I2C_HW_SMBUS_I801 0x040004 +#define I2C_HW_SMBUS_AMD756 0x040005 +#define I2C_HW_SMBUS_SIS5595 0x040006 +#define I2C_HW_SMBUS_ALI1535 0x040007 +#define I2C_HW_SMBUS_SIS630 0x040008 +#define I2C_HW_SMBUS_SIS96X 0x040009 +#define I2C_HW_SMBUS_AMD8111 0x04000a +#define I2C_HW_SMBUS_SCX200 0x04000b +#define I2C_HW_SMBUS_NFORCE2 0x04000c +#define I2C_HW_SMBUS_W9968CF 0x04000d +#define I2C_HW_SMBUS_OV511 0x04000e /* OV511(+) USB 1.1 webcam ICs */ +#define I2C_HW_SMBUS_OV518 0x04000f /* OV518(+) USB 1.1 webcam ICs */ +#define I2C_HW_SMBUS_OV519 0x040010 /* OV519 USB 1.1 webcam IC */ +#define I2C_HW_SMBUS_OVFX2 0x040011 /* Cypress/OmniVision FX2 webcam */ /* --- ISA pseudo-adapter */ -#define I2C_HW_ISA 0x00 +#define I2C_HW_ISA 0x050000 /* --- IPMI pseudo-adapter */ -#define I2C_HW_IPMI 0x00 +#define I2C_HW_IPMI 0x0b0000 /* --- IPMB adapter */ -#define I2C_HW_IPMB 0x00 +#define I2C_HW_IPMB 0x0c0000 /* --- MCP107 adapter */ -#define I2C_HW_MPC107 0x00 +#define I2C_HW_MPC107 0x0d0000 /* --- Marvell mv64xxx i2c adapter */ -#define I2C_HW_MV64XXX 0x00 +#define I2C_HW_MV64XXX 0x190000 + +/* --- Miscellaneous adapters */ +#define I2C_HW_SAA7146 0x060000 /* SAA7146 video decoder bus */ +#define I2C_HW_SAA7134 0x090000 /* SAA7134 video decoder bus */ #endif /* LINUX_I2C_ID_H */ diff --git a/include/linux/i2c-isa.h b/include/linux/i2c-isa.h new file mode 100644 index 000000000000..67e3598c4cec --- /dev/null +++ b/include/linux/i2c-isa.h @@ -0,0 +1,36 @@ +/* + * i2c-isa.h - definitions for the i2c-isa pseudo-i2c-adapter interface + * + * Copyright (C) 2005 Jean Delvare <khali@linux-fr.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _LINUX_I2C_ISA_H +#define _LINUX_I2C_ISA_H + +#include <linux/i2c.h> + +extern int i2c_isa_add_driver(struct i2c_driver *driver); +extern int i2c_isa_del_driver(struct i2c_driver *driver); + +/* Detect whether we are on the isa bus. This is only useful to hybrid + (i2c+isa) drivers. */ +#define i2c_is_isa_adapter(adapptr) \ + ((adapptr)->id == I2C_HW_ISA) +#define i2c_is_isa_client(clientptr) \ + i2c_is_isa_adapter((clientptr)->adapter) + +#endif /* _LINUX_I2C_ISA_H */ diff --git a/include/linux/i2c-pxa.h b/include/linux/i2c-pxa.h new file mode 100644 index 000000000000..5f3eaf802223 --- /dev/null +++ b/include/linux/i2c-pxa.h @@ -0,0 +1,48 @@ +#ifndef _LINUX_I2C_ALGO_PXA_H +#define _LINUX_I2C_ALGO_PXA_H + +struct i2c_eeprom_emu_watcher { + void (*write)(void *, unsigned int addr, unsigned char newval); +}; + +struct i2c_eeprom_emu_watch { + struct list_head node; + unsigned int start; + unsigned int end; + struct i2c_eeprom_emu_watcher *ops; + void *data; +}; + +#define I2C_EEPROM_EMU_SIZE (256) + +struct i2c_eeprom_emu { + unsigned int size; + unsigned int ptr; + unsigned int seen_start; + struct list_head watch; + + unsigned char bytes[I2C_EEPROM_EMU_SIZE]; +}; + +typedef enum i2c_slave_event_e { + I2C_SLAVE_EVENT_START_READ, + I2C_SLAVE_EVENT_START_WRITE, + I2C_SLAVE_EVENT_STOP +} i2c_slave_event_t; + +struct i2c_slave_client { + void *data; + void (*event)(void *ptr, i2c_slave_event_t event); + int (*read) (void *ptr); + void (*write)(void *ptr, unsigned int val); +}; + +extern int i2c_eeprom_emu_addwatcher(struct i2c_eeprom_emu *, void *data, + unsigned int addr, unsigned int size, + struct i2c_eeprom_emu_watcher *); + +extern void i2c_eeprom_emu_delwatcher(struct i2c_eeprom_emu *, void *data, struct i2c_eeprom_emu_watcher *watcher); + +extern struct i2c_eeprom_emu *i2c_pxa_get_eeprom(void); + +#endif /* _LINUX_I2C_ALGO_PXA_H */ diff --git a/include/linux/i2c-sensor.h b/include/linux/i2c-sensor.h deleted file mode 100644 index 21b625204956..000000000000 --- a/include/linux/i2c-sensor.h +++ /dev/null @@ -1,263 +0,0 @@ -/* - i2c-sensor.h - Part of the i2c package - was originally sensors.h - Part of lm_sensors, Linux kernel modules - for hardware monitoring - Copyright (c) 1998, 1999 Frodo Looijaard <frodol@dds.nl> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -*/ - -#ifndef _LINUX_I2C_SENSOR_H -#define _LINUX_I2C_SENSOR_H - -/* A structure containing detect information. - Force variables overrule all other variables; they force a detection on - that place. If a specific chip is given, the module blindly assumes this - chip type is present; if a general force (kind == 0) is given, the module - will still try to figure out what type of chip is present. This is useful - if for some reasons the detect for SMBus or ISA address space filled - fails. - probe: insmod parameter. Initialize this list with I2C_CLIENT_ISA_END values. - A list of pairs. The first value is a bus number (ANY_I2C_ISA_BUS for - the ISA bus, -1 for any I2C bus), the second is the address. - kind: The kind of chip. 0 equals any chip. -*/ -struct i2c_force_data { - unsigned short *force; - unsigned short kind; -}; - -/* A structure containing the detect information. - normal_i2c: filled in by the module writer. Terminated by I2C_CLIENT_ISA_END. - A list of I2C addresses which should normally be examined. - normal_isa: filled in by the module writer. Terminated by SENSORS_ISA_END. - A list of ISA addresses which should normally be examined. - probe: insmod parameter. Initialize this list with I2C_CLIENT_ISA_END values. - A list of pairs. The first value is a bus number (ANY_I2C_ISA_BUS for - the ISA bus, -1 for any I2C bus), the second is the address. These - addresses are also probed, as if they were in the 'normal' list. - ignore: insmod parameter. Initialize this list with I2C_CLIENT_ISA_END values. - A list of pairs. The first value is a bus number (ANY_I2C_ISA_BUS for - the ISA bus, -1 for any I2C bus), the second is the I2C address. These - addresses are never probed. This parameter overrules 'normal' and - 'probe', but not the 'force' lists. - force_data: insmod parameters. A list, ending with an element of which - the force field is NULL. -*/ -struct i2c_address_data { - unsigned short *normal_i2c; - unsigned int *normal_isa; - unsigned short *probe; - unsigned short *ignore; - struct i2c_force_data *forces; -}; - -#define SENSORS_MODULE_PARM_FORCE(name) \ - I2C_CLIENT_MODULE_PARM(force_ ## name, \ - "List of adapter,address pairs which are unquestionably" \ - " assumed to contain a `" # name "' chip") - - -/* This defines several insmod variables, and the addr_data structure */ -#define SENSORS_INSMOD \ - I2C_CLIENT_MODULE_PARM(probe, \ - "List of adapter,address pairs to scan additionally"); \ - I2C_CLIENT_MODULE_PARM(ignore, \ - "List of adapter,address pairs not to scan"); \ - static struct i2c_address_data addr_data = { \ - .normal_i2c = normal_i2c, \ - .normal_isa = normal_isa, \ - .probe = probe, \ - .ignore = ignore, \ - .forces = forces, \ - } - -/* The following functions create an enum with the chip names as elements. - The first element of the enum is any_chip. These are the only macros - a module will want to use. */ - -#define SENSORS_INSMOD_0 \ - enum chips { any_chip }; \ - I2C_CLIENT_MODULE_PARM(force, \ - "List of adapter,address pairs to boldly assume " \ - "to be present"); \ - static struct i2c_force_data forces[] = {{force,any_chip},{NULL}}; \ - SENSORS_INSMOD - -#define SENSORS_INSMOD_1(chip1) \ - enum chips { any_chip, chip1 }; \ - I2C_CLIENT_MODULE_PARM(force, \ - "List of adapter,address pairs to boldly assume " \ - "to be present"); \ - SENSORS_MODULE_PARM_FORCE(chip1); \ - static struct i2c_force_data forces[] = {{force,any_chip},\ - {force_ ## chip1,chip1}, \ - {NULL}}; \ - SENSORS_INSMOD - -#define SENSORS_INSMOD_2(chip1,chip2) \ - enum chips { any_chip, chip1, chip2 }; \ - I2C_CLIENT_MODULE_PARM(force, \ - "List of adapter,address pairs to boldly assume " \ - "to be present"); \ - SENSORS_MODULE_PARM_FORCE(chip1); \ - SENSORS_MODULE_PARM_FORCE(chip2); \ - static struct i2c_force_data forces[] = {{force,any_chip}, \ - {force_ ## chip1,chip1}, \ - {force_ ## chip2,chip2}, \ - {NULL}}; \ - SENSORS_INSMOD - -#define SENSORS_INSMOD_3(chip1,chip2,chip3) \ - enum chips { any_chip, chip1, chip2, chip3 }; \ - I2C_CLIENT_MODULE_PARM(force, \ - "List of adapter,address pairs to boldly assume " \ - "to be present"); \ - SENSORS_MODULE_PARM_FORCE(chip1); \ - SENSORS_MODULE_PARM_FORCE(chip2); \ - SENSORS_MODULE_PARM_FORCE(chip3); \ - static struct i2c_force_data forces[] = {{force,any_chip}, \ - {force_ ## chip1,chip1}, \ - {force_ ## chip2,chip2}, \ - {force_ ## chip3,chip3}, \ - {NULL}}; \ - SENSORS_INSMOD - -#define SENSORS_INSMOD_4(chip1,chip2,chip3,chip4) \ - enum chips { any_chip, chip1, chip2, chip3, chip4 }; \ - I2C_CLIENT_MODULE_PARM(force, \ - "List of adapter,address pairs to boldly assume " \ - "to be present"); \ - SENSORS_MODULE_PARM_FORCE(chip1); \ - SENSORS_MODULE_PARM_FORCE(chip2); \ - SENSORS_MODULE_PARM_FORCE(chip3); \ - SENSORS_MODULE_PARM_FORCE(chip4); \ - static struct i2c_force_data forces[] = {{force,any_chip}, \ - {force_ ## chip1,chip1}, \ - {force_ ## chip2,chip2}, \ - {force_ ## chip3,chip3}, \ - {force_ ## chip4,chip4}, \ - {NULL}}; \ - SENSORS_INSMOD - -#define SENSORS_INSMOD_5(chip1,chip2,chip3,chip4,chip5) \ - enum chips { any_chip, chip1, chip2, chip3, chip4, chip5 }; \ - I2C_CLIENT_MODULE_PARM(force, \ - "List of adapter,address pairs to boldly assume " \ - "to be present"); \ - SENSORS_MODULE_PARM_FORCE(chip1); \ - SENSORS_MODULE_PARM_FORCE(chip2); \ - SENSORS_MODULE_PARM_FORCE(chip3); \ - SENSORS_MODULE_PARM_FORCE(chip4); \ - SENSORS_MODULE_PARM_FORCE(chip5); \ - static struct i2c_force_data forces[] = {{force,any_chip}, \ - {force_ ## chip1,chip1}, \ - {force_ ## chip2,chip2}, \ - {force_ ## chip3,chip3}, \ - {force_ ## chip4,chip4}, \ - {force_ ## chip5,chip5}, \ - {NULL}}; \ - SENSORS_INSMOD - -#define SENSORS_INSMOD_6(chip1,chip2,chip3,chip4,chip5,chip6) \ - enum chips { any_chip, chip1, chip2, chip3, chip4, chip5, chip6 }; \ - I2C_CLIENT_MODULE_PARM(force, \ - "List of adapter,address pairs to boldly assume " \ - "to be present"); \ - SENSORS_MODULE_PARM_FORCE(chip1); \ - SENSORS_MODULE_PARM_FORCE(chip2); \ - SENSORS_MODULE_PARM_FORCE(chip3); \ - SENSORS_MODULE_PARM_FORCE(chip4); \ - SENSORS_MODULE_PARM_FORCE(chip5); \ - SENSORS_MODULE_PARM_FORCE(chip6); \ - static struct i2c_force_data forces[] = {{force,any_chip}, \ - {force_ ## chip1,chip1}, \ - {force_ ## chip2,chip2}, \ - {force_ ## chip3,chip3}, \ - {force_ ## chip4,chip4}, \ - {force_ ## chip5,chip5}, \ - {force_ ## chip6,chip6}, \ - {NULL}}; \ - SENSORS_INSMOD - -#define SENSORS_INSMOD_7(chip1,chip2,chip3,chip4,chip5,chip6,chip7) \ - enum chips { any_chip, chip1, chip2, chip3, chip4, chip5, chip6, chip7 }; \ - I2C_CLIENT_MODULE_PARM(force, \ - "List of adapter,address pairs to boldly assume " \ - "to be present"); \ - SENSORS_MODULE_PARM_FORCE(chip1); \ - SENSORS_MODULE_PARM_FORCE(chip2); \ - SENSORS_MODULE_PARM_FORCE(chip3); \ - SENSORS_MODULE_PARM_FORCE(chip4); \ - SENSORS_MODULE_PARM_FORCE(chip5); \ - SENSORS_MODULE_PARM_FORCE(chip6); \ - SENSORS_MODULE_PARM_FORCE(chip7); \ - static struct i2c_force_data forces[] = {{force,any_chip}, \ - {force_ ## chip1,chip1}, \ - {force_ ## chip2,chip2}, \ - {force_ ## chip3,chip3}, \ - {force_ ## chip4,chip4}, \ - {force_ ## chip5,chip5}, \ - {force_ ## chip6,chip6}, \ - {force_ ## chip7,chip7}, \ - {NULL}}; \ - SENSORS_INSMOD - -#define SENSORS_INSMOD_8(chip1,chip2,chip3,chip4,chip5,chip6,chip7,chip8) \ - enum chips { any_chip, chip1, chip2, chip3, chip4, chip5, chip6, chip7, chip8 }; \ - I2C_CLIENT_MODULE_PARM(force, \ - "List of adapter,address pairs to boldly assume " \ - "to be present"); \ - SENSORS_MODULE_PARM_FORCE(chip1); \ - SENSORS_MODULE_PARM_FORCE(chip2); \ - SENSORS_MODULE_PARM_FORCE(chip3); \ - SENSORS_MODULE_PARM_FORCE(chip4); \ - SENSORS_MODULE_PARM_FORCE(chip5); \ - SENSORS_MODULE_PARM_FORCE(chip6); \ - SENSORS_MODULE_PARM_FORCE(chip7); \ - SENSORS_MODULE_PARM_FORCE(chip8); \ - static struct i2c_force_data forces[] = {{force,any_chip}, \ - {force_ ## chip1,chip1}, \ - {force_ ## chip2,chip2}, \ - {force_ ## chip3,chip3}, \ - {force_ ## chip4,chip4}, \ - {force_ ## chip5,chip5}, \ - {force_ ## chip6,chip6}, \ - {force_ ## chip7,chip7}, \ - {force_ ## chip8,chip8}, \ - {NULL}}; \ - SENSORS_INSMOD - -/* Detect function. It iterates over all possible addresses itself. For - SMBus addresses, it will only call found_proc if some client is connected - to the SMBus (unless a 'force' matched); for ISA detections, this is not - done. */ -extern int i2c_detect(struct i2c_adapter *adapter, - struct i2c_address_data *address_data, - int (*found_proc) (struct i2c_adapter *, int, int)); - - -/* This macro is used to scale user-input to sensible values in almost all - chip drivers. */ -static inline int SENSORS_LIMIT(long value, long low, long high) -{ - if (value < low) - return low; - else if (value > high) - return high; - else - return value; -} -#endif /* def _LINUX_I2C_SENSOR_H */ diff --git a/include/linux/i2c-vid.h b/include/linux/i2c-vid.h deleted file mode 100644 index 41d0635e0ba9..000000000000 --- a/include/linux/i2c-vid.h +++ /dev/null @@ -1,111 +0,0 @@ -/* - i2c-vid.h - Part of lm_sensors, Linux kernel modules for hardware - monitoring - Copyright (c) 2002 Mark D. Studebaker <mdsxyz123@yahoo.com> - With assistance from Trent Piepho <xyzzy@speakeasy.org> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -*/ - -/* - This file contains common code for decoding VID pins. - This file is #included in various chip drivers in this directory. - As the user is unlikely to load more than one driver which - includes this code we don't worry about the wasted space. - Reference: VRM x.y DC-DC Converter Design Guidelines, - available at http://developer.intel.com -*/ - -/* - AMD Opteron processors don't follow the Intel VRM spec. - I'm going to "make up" 2.4 as the VRM spec for the Opterons. - No good reason just a mnemonic for the 24x Opteron processor - series - - Opteron VID encoding is: - - 00000 = 1.550 V - 00001 = 1.525 V - . . . . - 11110 = 0.800 V - 11111 = 0.000 V (off) - */ - -/* - Legal val values 0x00 - 0x1f; except for VRD 10.0, 0x00 - 0x3f. - vrm is the Intel VRM document version. - Note: vrm version is scaled by 10 and the return value is scaled by 1000 - to avoid floating point in the kernel. -*/ - -int i2c_which_vrm(void); - -#define DEFAULT_VRM 82 - -static inline int vid_from_reg(int val, int vrm) -{ - int vid; - - switch(vrm) { - - case 0: - return 0; - - case 100: /* VRD 10.0 */ - if((val & 0x1f) == 0x1f) - return 0; - if((val & 0x1f) <= 0x09 || val == 0x0a) - vid = 10875 - (val & 0x1f) * 250; - else - vid = 18625 - (val & 0x1f) * 250; - if(val & 0x20) - vid -= 125; - vid /= 10; /* only return 3 dec. places for now */ - return vid; - - case 24: /* Opteron processor */ - return(val == 0x1f ? 0 : 1550 - val * 25); - - case 91: /* VRM 9.1 */ - case 90: /* VRM 9.0 */ - return(val == 0x1f ? 0 : - 1850 - val * 25); - - case 85: /* VRM 8.5 */ - return((val & 0x10 ? 25 : 0) + - ((val & 0x0f) > 0x04 ? 2050 : 1250) - - ((val & 0x0f) * 50)); - - case 84: /* VRM 8.4 */ - val &= 0x0f; - /* fall through */ - default: /* VRM 8.2 */ - return(val == 0x1f ? 0 : - val & 0x10 ? 5100 - (val) * 100 : - 2050 - (val) * 50); - } -} - -static inline int vid_to_reg(int val, int vrm) -{ - switch (vrm) { - case 91: /* VRM 9.1 */ - case 90: /* VRM 9.0 */ - return ((val >= 1100) && (val <= 1850) ? - ((18499 - val * 10) / 25 + 5) / 10 : -1); - default: - return -1; - } -} diff --git a/include/linux/i2c.h b/include/linux/i2c.h index be837b13f297..be35332b67e6 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -34,6 +34,13 @@ #include <linux/device.h> /* for struct device */ #include <asm/semaphore.h> +/* --- For i2c-isa ---------------------------------------------------- */ + +extern void i2c_adapter_dev_release(struct device *dev); +extern struct device_driver i2c_adapter_driver; +extern struct class i2c_adapter_class; +extern struct bus_type i2c_bus_type; + /* --- General options ------------------------------------------------ */ struct i2c_msg; @@ -41,7 +48,6 @@ struct i2c_algorithm; struct i2c_adapter; struct i2c_client; struct i2c_driver; -struct i2c_client_address_data; union i2c_smbus_data; /* @@ -143,12 +149,9 @@ struct i2c_driver { */ struct i2c_client { unsigned int flags; /* div., see below */ - unsigned int addr; /* chip address - NOTE: 7bit */ + unsigned short addr; /* chip address - NOTE: 7bit */ /* addresses are stored in the */ - /* _LOWER_ 7 bits of this char */ - /* addr: unsigned int to make lm_sensors i2c-isa adapter work - more cleanly. It does not take any more memory space, due to - alignment considerations */ + /* _LOWER_ 7 bits */ struct i2c_adapter *adapter; /* the adapter we sit on */ struct i2c_driver *driver; /* and our access routines */ int usage_count; /* How many accesses currently */ @@ -160,6 +163,11 @@ struct i2c_client { }; #define to_i2c_client(d) container_of(d, struct i2c_client, dev) +static inline struct i2c_client *kobj_to_i2c_client(struct kobject *kobj) +{ + return to_i2c_client(container_of(kobj, struct device, kobj)); +} + static inline void *i2c_get_clientdata (struct i2c_client *dev) { return dev_get_drvdata (&dev->dev); @@ -170,13 +178,6 @@ static inline void i2c_set_clientdata (struct i2c_client *dev, void *data) dev_set_drvdata (&dev->dev, data); } -#define I2C_DEVNAME(str) .name = str - -static inline char *i2c_clientname(struct i2c_client *c) -{ - return &c->name[0]; -} - /* * The following structs are for those who like to implement new bus drivers: * i2c_algorithm is the interface to a class of hardware solutions which can @@ -184,9 +185,6 @@ static inline char *i2c_clientname(struct i2c_client *c) * to name two of the most common. */ struct i2c_algorithm { - char name[32]; /* textual description */ - unsigned int id; - /* If an adapter algorithm can't do I2C-level access, set master_xfer to NULL. If an adapter algorithm can do SMBus access, set smbus_xfer. If set to NULL, the SMBus protocol is simulated @@ -214,8 +212,7 @@ struct i2c_algorithm { */ struct i2c_adapter { struct module *owner; - unsigned int id;/* == is algo->id | hwdep.struct->id, */ - /* for registered values see below */ + unsigned int id; unsigned int class; struct i2c_algorithm *algo;/* the algorithm to access the bus */ void *algo_data; @@ -292,12 +289,11 @@ struct i2c_client_address_data { unsigned short *normal_i2c; unsigned short *probe; unsigned short *ignore; - unsigned short *force; + unsigned short **forces; }; /* Internal numbers to terminate lists */ #define I2C_CLIENT_END 0xfffeU -#define I2C_CLIENT_ISA_END 0xfffefffeU /* The numbers to use to set I2C bus address */ #define ANY_I2C_BUS 0xffff @@ -356,10 +352,6 @@ extern int i2c_probe(struct i2c_adapter *adapter, */ extern int i2c_control(struct i2c_client *,unsigned int, unsigned long); -/* This call returns a unique low identifier for each registered adapter, - * or -1 if the adapter was not registered. - */ -extern int i2c_adapter_id(struct i2c_adapter *adap); extern struct i2c_adapter* i2c_get_adapter(int id); extern void i2c_put_adapter(struct i2c_adapter *adap); @@ -376,6 +368,12 @@ static inline int i2c_check_functionality(struct i2c_adapter *adap, u32 func) return (func & i2c_get_functionality(adap)) == func; } +/* Return id number for a specific adapter */ +static inline int i2c_adapter_id(struct i2c_adapter *adap) +{ + return adap->nr; +} + /* * I2C Message - used for pure i2c transaction, also from /dev interface */ @@ -510,9 +508,6 @@ union i2c_smbus_data { #define I2C_FUNCS 0x0705 /* Get the adapter functionality */ #define I2C_RDWR 0x0707 /* Combined R/W transfer (one stop only)*/ #define I2C_PEC 0x0708 /* != 0 for SMBus PEC */ -#if 0 -#define I2C_ACK_TEST 0x0710 /* See if a slave is at a specific address */ -#endif #define I2C_SMBUS 0x0720 /* SMBus-level access */ @@ -556,27 +551,148 @@ union i2c_smbus_data { module_param_array(var, short, &var##_num, 0); \ MODULE_PARM_DESC(var,desc) -/* This is the one you want to use in your own modules */ +#define I2C_CLIENT_MODULE_PARM_FORCE(name) \ +I2C_CLIENT_MODULE_PARM(force_##name, \ + "List of adapter,address pairs which are " \ + "unquestionably assumed to contain a `" \ + # name "' chip") + + +#define I2C_CLIENT_INSMOD_COMMON \ +I2C_CLIENT_MODULE_PARM(probe, "List of adapter,address pairs to scan " \ + "additionally"); \ +I2C_CLIENT_MODULE_PARM(ignore, "List of adapter,address pairs not to " \ + "scan"); \ +static struct i2c_client_address_data addr_data = { \ + .normal_i2c = normal_i2c, \ + .probe = probe, \ + .ignore = ignore, \ + .forces = forces, \ +} + +/* These are the ones you want to use in your own drivers. Pick the one + which matches the number of devices the driver differenciates between. */ #define I2C_CLIENT_INSMOD \ - I2C_CLIENT_MODULE_PARM(probe, \ - "List of adapter,address pairs to scan additionally"); \ - I2C_CLIENT_MODULE_PARM(ignore, \ - "List of adapter,address pairs not to scan"); \ I2C_CLIENT_MODULE_PARM(force, \ "List of adapter,address pairs to boldly assume " \ "to be present"); \ - static struct i2c_client_address_data addr_data = { \ - .normal_i2c = normal_i2c, \ - .probe = probe, \ - .ignore = ignore, \ - .force = force, \ - } - -/* Detect whether we are on the isa bus. If this returns true, all i2c - access will fail! */ -#define i2c_is_isa_client(clientptr) \ - ((clientptr)->adapter->algo->id == I2C_ALGO_ISA) -#define i2c_is_isa_adapter(adapptr) \ - ((adapptr)->algo->id == I2C_ALGO_ISA) + static unsigned short *forces[] = { \ + force, \ + NULL \ + }; \ +I2C_CLIENT_INSMOD_COMMON + +#define I2C_CLIENT_INSMOD_1(chip1) \ +enum chips { any_chip, chip1 }; \ +I2C_CLIENT_MODULE_PARM(force, "List of adapter,address pairs to " \ + "boldly assume to be present"); \ +I2C_CLIENT_MODULE_PARM_FORCE(chip1); \ +static unsigned short *forces[] = { force, force_##chip1, NULL }; \ +I2C_CLIENT_INSMOD_COMMON + +#define I2C_CLIENT_INSMOD_2(chip1, chip2) \ +enum chips { any_chip, chip1, chip2 }; \ +I2C_CLIENT_MODULE_PARM(force, "List of adapter,address pairs to " \ + "boldly assume to be present"); \ +I2C_CLIENT_MODULE_PARM_FORCE(chip1); \ +I2C_CLIENT_MODULE_PARM_FORCE(chip2); \ +static unsigned short *forces[] = { force, force_##chip1, \ + force_##chip2, NULL }; \ +I2C_CLIENT_INSMOD_COMMON + +#define I2C_CLIENT_INSMOD_3(chip1, chip2, chip3) \ +enum chips { any_chip, chip1, chip2, chip3 }; \ +I2C_CLIENT_MODULE_PARM(force, "List of adapter,address pairs to " \ + "boldly assume to be present"); \ +I2C_CLIENT_MODULE_PARM_FORCE(chip1); \ +I2C_CLIENT_MODULE_PARM_FORCE(chip2); \ +I2C_CLIENT_MODULE_PARM_FORCE(chip3); \ +static unsigned short *forces[] = { force, force_##chip1, \ + force_##chip2, force_##chip3, \ + NULL }; \ +I2C_CLIENT_INSMOD_COMMON + +#define I2C_CLIENT_INSMOD_4(chip1, chip2, chip3, chip4) \ +enum chips { any_chip, chip1, chip2, chip3, chip4 }; \ +I2C_CLIENT_MODULE_PARM(force, "List of adapter,address pairs to " \ + "boldly assume to be present"); \ +I2C_CLIENT_MODULE_PARM_FORCE(chip1); \ +I2C_CLIENT_MODULE_PARM_FORCE(chip2); \ +I2C_CLIENT_MODULE_PARM_FORCE(chip3); \ +I2C_CLIENT_MODULE_PARM_FORCE(chip4); \ +static unsigned short *forces[] = { force, force_##chip1, \ + force_##chip2, force_##chip3, \ + force_##chip4, NULL}; \ +I2C_CLIENT_INSMOD_COMMON + +#define I2C_CLIENT_INSMOD_5(chip1, chip2, chip3, chip4, chip5) \ +enum chips { any_chip, chip1, chip2, chip3, chip4, chip5 }; \ +I2C_CLIENT_MODULE_PARM(force, "List of adapter,address pairs to " \ + "boldly assume to be present"); \ +I2C_CLIENT_MODULE_PARM_FORCE(chip1); \ +I2C_CLIENT_MODULE_PARM_FORCE(chip2); \ +I2C_CLIENT_MODULE_PARM_FORCE(chip3); \ +I2C_CLIENT_MODULE_PARM_FORCE(chip4); \ +I2C_CLIENT_MODULE_PARM_FORCE(chip5); \ +static unsigned short *forces[] = { force, force_##chip1, \ + force_##chip2, force_##chip3, \ + force_##chip4, force_##chip5, \ + NULL }; \ +I2C_CLIENT_INSMOD_COMMON + +#define I2C_CLIENT_INSMOD_6(chip1, chip2, chip3, chip4, chip5, chip6) \ +enum chips { any_chip, chip1, chip2, chip3, chip4, chip5, chip6 }; \ +I2C_CLIENT_MODULE_PARM(force, "List of adapter,address pairs to " \ + "boldly assume to be present"); \ +I2C_CLIENT_MODULE_PARM_FORCE(chip1); \ +I2C_CLIENT_MODULE_PARM_FORCE(chip2); \ +I2C_CLIENT_MODULE_PARM_FORCE(chip3); \ +I2C_CLIENT_MODULE_PARM_FORCE(chip4); \ +I2C_CLIENT_MODULE_PARM_FORCE(chip5); \ +I2C_CLIENT_MODULE_PARM_FORCE(chip6); \ +static unsigned short *forces[] = { force, force_##chip1, \ + force_##chip2, force_##chip3, \ + force_##chip4, force_##chip5, \ + force_##chip6, NULL }; \ +I2C_CLIENT_INSMOD_COMMON + +#define I2C_CLIENT_INSMOD_7(chip1, chip2, chip3, chip4, chip5, chip6, chip7) \ +enum chips { any_chip, chip1, chip2, chip3, chip4, chip5, chip6, \ + chip7 }; \ +I2C_CLIENT_MODULE_PARM(force, "List of adapter,address pairs to " \ + "boldly assume to be present"); \ +I2C_CLIENT_MODULE_PARM_FORCE(chip1); \ +I2C_CLIENT_MODULE_PARM_FORCE(chip2); \ +I2C_CLIENT_MODULE_PARM_FORCE(chip3); \ +I2C_CLIENT_MODULE_PARM_FORCE(chip4); \ +I2C_CLIENT_MODULE_PARM_FORCE(chip5); \ +I2C_CLIENT_MODULE_PARM_FORCE(chip6); \ +I2C_CLIENT_MODULE_PARM_FORCE(chip7); \ +static unsigned short *forces[] = { force, force_##chip1, \ + force_##chip2, force_##chip3, \ + force_##chip4, force_##chip5, \ + force_##chip6, force_##chip7, \ + NULL }; \ +I2C_CLIENT_INSMOD_COMMON + +#define I2C_CLIENT_INSMOD_8(chip1, chip2, chip3, chip4, chip5, chip6, chip7, chip8) \ +enum chips { any_chip, chip1, chip2, chip3, chip4, chip5, chip6, \ + chip7, chip8 }; \ +I2C_CLIENT_MODULE_PARM(force, "List of adapter,address pairs to " \ + "boldly assume to be present"); \ +I2C_CLIENT_MODULE_PARM_FORCE(chip1); \ +I2C_CLIENT_MODULE_PARM_FORCE(chip2); \ +I2C_CLIENT_MODULE_PARM_FORCE(chip3); \ +I2C_CLIENT_MODULE_PARM_FORCE(chip4); \ +I2C_CLIENT_MODULE_PARM_FORCE(chip5); \ +I2C_CLIENT_MODULE_PARM_FORCE(chip6); \ +I2C_CLIENT_MODULE_PARM_FORCE(chip7); \ +I2C_CLIENT_MODULE_PARM_FORCE(chip8); \ +static unsigned short *forces[] = { force, force_##chip1, \ + force_##chip2, force_##chip3, \ + force_##chip4, force_##chip5, \ + force_##chip6, force_##chip7, \ + force_##chip8, NULL }; \ +I2C_CLIENT_INSMOD_COMMON #endif /* _LINUX_I2C_H */ diff --git a/include/linux/if_tun.h b/include/linux/if_tun.h index 096a85a58ae5..88aef7b86ef4 100644 --- a/include/linux/if_tun.h +++ b/include/linux/if_tun.h @@ -77,6 +77,7 @@ struct tun_struct { #define TUNSETIFF _IOW('T', 202, int) #define TUNSETPERSIST _IOW('T', 203, int) #define TUNSETOWNER _IOW('T', 204, int) +#define TUNSETLINK _IOW('T', 205, int) /* TUNSETIFF ifr flags */ #define IFF_TUN 0x0001 diff --git a/include/linux/in6.h b/include/linux/in6.h index dcf5720ffcbb..bd32b79d6295 100644 --- a/include/linux/in6.h +++ b/include/linux/in6.h @@ -148,13 +148,13 @@ struct in6_flowlabel_req */ #define IPV6_ADDRFORM 1 -#define IPV6_PKTINFO 2 -#define IPV6_HOPOPTS 3 -#define IPV6_DSTOPTS 4 -#define IPV6_RTHDR 5 -#define IPV6_PKTOPTIONS 6 +#define IPV6_2292PKTINFO 2 +#define IPV6_2292HOPOPTS 3 +#define IPV6_2292DSTOPTS 4 +#define IPV6_2292RTHDR 5 +#define IPV6_2292PKTOPTIONS 6 #define IPV6_CHECKSUM 7 -#define IPV6_HOPLIMIT 8 +#define IPV6_2292HOPLIMIT 8 #define IPV6_NEXTHOP 9 #define IPV6_AUTHHDR 10 /* obsolete */ #define IPV6_FLOWINFO 11 @@ -198,4 +198,28 @@ struct in6_flowlabel_req * MCAST_MSFILTER 48 */ +/* RFC3542 advanced socket options (50-67) */ +#define IPV6_RECVPKTINFO 50 +#define IPV6_PKTINFO 51 +#if 0 +#define IPV6_RECVPATHMTU 52 +#define IPV6_PATHMTU 53 +#define IPV6_DONTFRAG 54 +#define IPV6_USE_MIN_MTU 55 +#endif +#define IPV6_RECVHOPOPTS 56 +#define IPV6_HOPOPTS 57 +#if 0 +#define IPV6_RECVRTHDRDSTOPTS 58 /* Unused, see net/ipv6/datagram.c */ +#endif +#define IPV6_RTHDRDSTOPTS 59 +#define IPV6_RECVRTHDR 60 +#define IPV6_RTHDR 61 +#define IPV6_RECVDSTOPTS 62 +#define IPV6_DSTOPTS 63 +#define IPV6_RECVHOPLIMIT 64 +#define IPV6_HOPLIMIT 65 +#define IPV6_RECVTCLASS 66 +#define IPV6_TCLASS 67 + #endif diff --git a/include/linux/init_task.h b/include/linux/init_task.h index c727c195a91a..68ab5f2ab9cd 100644 --- a/include/linux/init_task.h +++ b/include/linux/init_task.h @@ -2,17 +2,27 @@ #define _LINUX__INIT_TASK_H #include <linux/file.h> +#include <linux/rcupdate.h> -#define INIT_FILES \ -{ \ - .count = ATOMIC_INIT(1), \ - .file_lock = SPIN_LOCK_UNLOCKED, \ +#define INIT_FDTABLE \ +{ \ .max_fds = NR_OPEN_DEFAULT, \ .max_fdset = __FD_SETSIZE, \ .next_fd = 0, \ .fd = &init_files.fd_array[0], \ .close_on_exec = &init_files.close_on_exec_init, \ .open_fds = &init_files.open_fds_init, \ + .rcu = RCU_HEAD_INIT, \ + .free_files = NULL, \ + .next = NULL, \ +} + +#define INIT_FILES \ +{ \ + .count = ATOMIC_INIT(1), \ + .file_lock = SPIN_LOCK_UNLOCKED, \ + .fdt = &init_files.fdtab, \ + .fdtab = INIT_FDTABLE, \ .close_on_exec_init = { { 0, } }, \ .open_fds_init = { { 0, } }, \ .fd_array = { NULL, } \ diff --git a/include/linux/inotify.h b/include/linux/inotify.h index 93bb3afe646b..ee5b239092ed 100644 --- a/include/linux/inotify.h +++ b/include/linux/inotify.h @@ -47,6 +47,7 @@ struct inotify_event { #define IN_MOVE (IN_MOVED_FROM | IN_MOVED_TO) /* moves */ /* special flags */ +#define IN_MASK_ADD 0x20000000 /* add to the mask of an already existing watch */ #define IN_ISDIR 0x40000000 /* event occurred against dir */ #define IN_ONESHOT 0x80000000 /* only send event once */ diff --git a/include/linux/input.h b/include/linux/input.h index 227a497c0678..e8c296ff6257 100644 --- a/include/linux/input.h +++ b/include/linux/input.h @@ -66,6 +66,7 @@ struct input_absinfo { #define EVIOCGKEY(len) _IOC(_IOC_READ, 'E', 0x18, len) /* get global keystate */ #define EVIOCGLED(len) _IOC(_IOC_READ, 'E', 0x19, len) /* get all LEDs */ #define EVIOCGSND(len) _IOC(_IOC_READ, 'E', 0x1a, len) /* get all sounds status */ +#define EVIOCGSW(len) _IOC(_IOC_READ, 'E', 0x1b, len) /* get all switch states */ #define EVIOCGBIT(ev,len) _IOC(_IOC_READ, 'E', 0x20 + ev, len) /* get event bits */ #define EVIOCGABS(abs) _IOR('E', 0x40 + abs, struct input_absinfo) /* get abs value/limits */ @@ -86,6 +87,7 @@ struct input_absinfo { #define EV_REL 0x02 #define EV_ABS 0x03 #define EV_MSC 0x04 +#define EV_SW 0x05 #define EV_LED 0x11 #define EV_SND 0x12 #define EV_REP 0x14 @@ -559,6 +561,20 @@ struct input_absinfo { #define ABS_MAX 0x3f /* + * Switch events + */ + +#define SW_0 0x00 +#define SW_1 0x01 +#define SW_2 0x02 +#define SW_3 0x03 +#define SW_4 0x04 +#define SW_5 0x05 +#define SW_6 0x06 +#define SW_7 0x07 +#define SW_MAX 0x0f + +/* * Misc events */ @@ -832,6 +848,7 @@ struct input_dev { unsigned long ledbit[NBITS(LED_MAX)]; unsigned long sndbit[NBITS(SND_MAX)]; unsigned long ffbit[NBITS(FF_MAX)]; + unsigned long swbit[NBITS(SW_MAX)]; int ff_effects_max; unsigned int keycodemax; @@ -852,6 +869,7 @@ struct input_dev { unsigned long key[NBITS(KEY_MAX)]; unsigned long led[NBITS(LED_MAX)]; unsigned long snd[NBITS(SND_MAX)]; + unsigned long sw[NBITS(SW_MAX)]; int absmax[ABS_MAX + 1]; int absmin[ABS_MAX + 1]; @@ -894,6 +912,7 @@ struct input_dev { #define INPUT_DEVICE_ID_MATCH_LEDBIT 0x200 #define INPUT_DEVICE_ID_MATCH_SNDBIT 0x400 #define INPUT_DEVICE_ID_MATCH_FFBIT 0x800 +#define INPUT_DEVICE_ID_MATCH_SWBIT 0x1000 #define INPUT_DEVICE_ID_MATCH_DEVICE\ (INPUT_DEVICE_ID_MATCH_BUS | INPUT_DEVICE_ID_MATCH_VENDOR | INPUT_DEVICE_ID_MATCH_PRODUCT) @@ -914,6 +933,7 @@ struct input_device_id { unsigned long ledbit[NBITS(LED_MAX)]; unsigned long sndbit[NBITS(SND_MAX)]; unsigned long ffbit[NBITS(FF_MAX)]; + unsigned long swbit[NBITS(SW_MAX)]; unsigned long driver_info; }; @@ -1006,6 +1026,11 @@ static inline void input_report_ff_status(struct input_dev *dev, unsigned int co input_event(dev, EV_FF_STATUS, code, value); } +static inline void input_report_switch(struct input_dev *dev, unsigned int code, int value) +{ + input_event(dev, EV_SW, code, !!value); +} + static inline void input_regs(struct input_dev *dev, struct pt_regs *regs) { dev->regs = regs; diff --git a/include/linux/ioctl32.h b/include/linux/ioctl32.h index e8c4af32b3bb..948809d99917 100644 --- a/include/linux/ioctl32.h +++ b/include/linux/ioctl32.h @@ -14,26 +14,4 @@ struct ioctl_trans { struct ioctl_trans *next; }; -/* - * Register an 32bit ioctl translation handler for ioctl cmd. - * - * handler == NULL: use 64bit ioctl handler. - * arguments to handler: fd: file descriptor - * cmd: ioctl command. - * arg: ioctl argument - * struct file *file: file descriptor pointer. - */ - -#ifdef CONFIG_COMPAT -extern int __deprecated register_ioctl32_conversion(unsigned int cmd, - ioctl_trans_handler_t handler); -extern int __deprecated unregister_ioctl32_conversion(unsigned int cmd); - -#else - -#define register_ioctl32_conversion(cmd, handler) ({ 0; }) -#define unregister_ioctl32_conversion(cmd) ({ 0; }) - -#endif - #endif diff --git a/include/linux/ipmi.h b/include/linux/ipmi.h index 596ca6130159..938d55b813a5 100644 --- a/include/linux/ipmi.h +++ b/include/linux/ipmi.h @@ -35,6 +35,7 @@ #define __LINUX_IPMI_H #include <linux/ipmi_msgdefs.h> +#include <linux/compiler.h> /* * This file describes an interface to an IPMI driver. You have to @@ -241,7 +242,8 @@ struct ipmi_recv_msg /* The user_msg_data is the data supplied when a message was sent, if this is a response to a sent message. If this is not a response to a sent message, then user_msg_data will - be NULL. */ + be NULL. If the user above is NULL, then this will be the + intf. */ void *user_msg_data; /* Call this when done with the message. It will presumably free @@ -298,13 +300,19 @@ void ipmi_get_version(ipmi_user_t user, this user, so it will affect all users of this interface. This is so some initialization code can come in and do the OEM-specific things it takes to determine your address (if not the BMC) and set - it for everyone else. */ -void ipmi_set_my_address(ipmi_user_t user, - unsigned char address); -unsigned char ipmi_get_my_address(ipmi_user_t user); -void ipmi_set_my_LUN(ipmi_user_t user, - unsigned char LUN); -unsigned char ipmi_get_my_LUN(ipmi_user_t user); + it for everyone else. Note that each channel can have its own address. */ +int ipmi_set_my_address(ipmi_user_t user, + unsigned int channel, + unsigned char address); +int ipmi_get_my_address(ipmi_user_t user, + unsigned int channel, + unsigned char *address); +int ipmi_set_my_LUN(ipmi_user_t user, + unsigned int channel, + unsigned char LUN); +int ipmi_get_my_LUN(ipmi_user_t user, + unsigned int channel, + unsigned char *LUN); /* * Like ipmi_request, but lets you specify the number of retries and @@ -585,6 +593,16 @@ struct ipmi_cmdspec * things it takes to determine your address (if not the BMC) and set * it for everyone else. You should probably leave the LUN alone. */ +struct ipmi_channel_lun_address_set +{ + unsigned short channel; + unsigned char value; +}; +#define IPMICTL_SET_MY_CHANNEL_ADDRESS_CMD _IOR(IPMI_IOC_MAGIC, 24, struct ipmi_channel_lun_address_set) +#define IPMICTL_GET_MY_CHANNEL_ADDRESS_CMD _IOR(IPMI_IOC_MAGIC, 25, struct ipmi_channel_lun_address_set) +#define IPMICTL_SET_MY_CHANNEL_LUN_CMD _IOR(IPMI_IOC_MAGIC, 26, struct ipmi_channel_lun_address_set) +#define IPMICTL_GET_MY_CHANNEL_LUN_CMD _IOR(IPMI_IOC_MAGIC, 27, struct ipmi_channel_lun_address_set) +/* Legacy interfaces, these only set IPMB 0. */ #define IPMICTL_SET_MY_ADDRESS_CMD _IOR(IPMI_IOC_MAGIC, 17, unsigned int) #define IPMICTL_GET_MY_ADDRESS_CMD _IOR(IPMI_IOC_MAGIC, 18, unsigned int) #define IPMICTL_SET_MY_LUN_CMD _IOR(IPMI_IOC_MAGIC, 19, unsigned int) diff --git a/include/linux/ipv6.h b/include/linux/ipv6.h index 3c7dbc6a0a70..6c5f7b39a4b0 100644 --- a/include/linux/ipv6.h +++ b/include/linux/ipv6.h @@ -189,6 +189,7 @@ struct inet6_skb_parm { __u16 dst0; __u16 srcrt; __u16 dst1; + __u16 lastopt; }; #define IP6CB(skb) ((struct inet6_skb_parm*)((skb)->cb)) @@ -234,14 +235,20 @@ struct ipv6_pinfo { /* pktoption flags */ union { struct { - __u8 srcrt:2, + __u16 srcrt:2, + osrcrt:2, rxinfo:1, + rxoinfo:1, rxhlim:1, + rxohlim:1, hopopts:1, + ohopopts:1, dstopts:1, - rxflow:1; + odstopts:1, + rxflow:1, + rxtclass:1; } bits; - __u8 all; + __u16 all; } rxopt; /* sockopt flags */ @@ -250,6 +257,7 @@ struct ipv6_pinfo { sndflow:1, pmtudisc:2, ipv6only:1; + __u8 tclass; __u32 dst_cookie; @@ -263,6 +271,7 @@ struct ipv6_pinfo { struct ipv6_txoptions *opt; struct rt6_info *rt; int hop_limit; + int tclass; } cork; }; diff --git a/include/linux/irq.h b/include/linux/irq.h index 069d3b84d311..69681c3b1f05 100644 --- a/include/linux/irq.h +++ b/include/linux/irq.h @@ -32,7 +32,12 @@ #define IRQ_WAITING 32 /* IRQ not yet seen - for autodetection */ #define IRQ_LEVEL 64 /* IRQ level triggered */ #define IRQ_MASKED 128 /* IRQ masked - shouldn't be seen again */ -#define IRQ_PER_CPU 256 /* IRQ is per CPU */ +#if defined(ARCH_HAS_IRQ_PER_CPU) +# define IRQ_PER_CPU 256 /* IRQ is per CPU */ +# define CHECK_IRQ_PER_CPU(var) ((var) & IRQ_PER_CPU) +#else +# define CHECK_IRQ_PER_CPU(var) 0 +#endif /* * Interrupt controller descriptor. This is all we need @@ -71,16 +76,139 @@ typedef struct irq_desc { unsigned int irq_count; /* For detecting broken interrupts */ unsigned int irqs_unhandled; spinlock_t lock; +#if defined (CONFIG_GENERIC_PENDING_IRQ) || defined (CONFIG_IRQBALANCE) + unsigned int move_irq; /* Flag need to re-target intr dest*/ +#endif } ____cacheline_aligned irq_desc_t; extern irq_desc_t irq_desc [NR_IRQS]; +/* Return a pointer to the irq descriptor for IRQ. */ +static inline irq_desc_t * +irq_descp (int irq) +{ + return irq_desc + irq; +} + #include <asm/hw_irq.h> /* the arch dependent stuff */ extern int setup_irq(unsigned int irq, struct irqaction * new); #ifdef CONFIG_GENERIC_HARDIRQS extern cpumask_t irq_affinity[NR_IRQS]; + +#ifdef CONFIG_SMP +static inline void set_native_irq_info(int irq, cpumask_t mask) +{ + irq_affinity[irq] = mask; +} +#else +static inline void set_native_irq_info(int irq, cpumask_t mask) +{ +} +#endif + +#ifdef CONFIG_SMP + +#if defined (CONFIG_GENERIC_PENDING_IRQ) || defined (CONFIG_IRQBALANCE) +extern cpumask_t pending_irq_cpumask[NR_IRQS]; + +static inline void set_pending_irq(unsigned int irq, cpumask_t mask) +{ + irq_desc_t *desc = irq_desc + irq; + unsigned long flags; + + spin_lock_irqsave(&desc->lock, flags); + desc->move_irq = 1; + pending_irq_cpumask[irq] = mask; + spin_unlock_irqrestore(&desc->lock, flags); +} + +static inline void +move_native_irq(int irq) +{ + cpumask_t tmp; + irq_desc_t *desc = irq_descp(irq); + + if (likely (!desc->move_irq)) + return; + + desc->move_irq = 0; + + if (likely(cpus_empty(pending_irq_cpumask[irq]))) + return; + + if (!desc->handler->set_affinity) + return; + + /* note - we hold the desc->lock */ + cpus_and(tmp, pending_irq_cpumask[irq], cpu_online_map); + + /* + * If there was a valid mask to work with, please + * do the disable, re-program, enable sequence. + * This is *not* particularly important for level triggered + * but in a edge trigger case, we might be setting rte + * when an active trigger is comming in. This could + * cause some ioapics to mal-function. + * Being paranoid i guess! + */ + if (unlikely(!cpus_empty(tmp))) { + desc->handler->disable(irq); + desc->handler->set_affinity(irq,tmp); + desc->handler->enable(irq); + } + cpus_clear(pending_irq_cpumask[irq]); +} + +#ifdef CONFIG_PCI_MSI +/* + * Wonder why these are dummies? + * For e.g the set_ioapic_affinity_vector() calls the set_ioapic_affinity_irq() + * counter part after translating the vector to irq info. We need to perform + * this operation on the real irq, when we dont use vector, i.e when + * pci_use_vector() is false. + */ +static inline void move_irq(int irq) +{ +} + +static inline void set_irq_info(int irq, cpumask_t mask) +{ +} + +#else // CONFIG_PCI_MSI + +static inline void move_irq(int irq) +{ + move_native_irq(irq); +} + +static inline void set_irq_info(int irq, cpumask_t mask) +{ + set_native_irq_info(irq, mask); +} +#endif // CONFIG_PCI_MSI + +#else // CONFIG_GENERIC_PENDING_IRQ || CONFIG_IRQBALANCE + +#define move_irq(x) +#define move_native_irq(x) +#define set_pending_irq(x,y) +static inline void set_irq_info(int irq, cpumask_t mask) +{ + set_native_irq_info(irq, mask); +} + +#endif // CONFIG_GENERIC_PENDING_IRQ + +#else // CONFIG_SMP + +#define move_irq(x) +#define move_native_irq(x) + +#endif // CONFIG_SMP + extern int no_irq_affinity; extern int noirqdebug_setup(char *str); diff --git a/include/linux/isdn.h b/include/linux/isdn.h index 862083eb58ab..53eaee96065b 100644 --- a/include/linux/isdn.h +++ b/include/linux/isdn.h @@ -150,7 +150,6 @@ typedef struct { #include <linux/errno.h> #include <linux/fs.h> #include <linux/major.h> -#include <asm/segment.h> #include <asm/io.h> #include <linux/kernel.h> #include <linux/signal.h> diff --git a/include/linux/jbd.h b/include/linux/jbd.h index 593407e865b1..84321a4cac93 100644 --- a/include/linux/jbd.h +++ b/include/linux/jbd.h @@ -914,7 +914,6 @@ extern int journal_wipe (journal_t *, int); extern int journal_skip_recovery (journal_t *); extern void journal_update_superblock (journal_t *, int); extern void __journal_abort_hard (journal_t *); -extern void __journal_abort_soft (journal_t *, int); extern void journal_abort (journal_t *, int); extern int journal_errno (journal_t *); extern void journal_ack_err (journal_t *); diff --git a/include/linux/klist.h b/include/linux/klist.h index eebf5e5696ec..74071254c9d3 100644 --- a/include/linux/klist.h +++ b/include/linux/klist.h @@ -9,20 +9,25 @@ * This file is rleased under the GPL v2. */ +#ifndef _LINUX_KLIST_H +#define _LINUX_KLIST_H + #include <linux/spinlock.h> #include <linux/completion.h> #include <linux/kref.h> #include <linux/list.h> - +struct klist_node; struct klist { spinlock_t k_lock; struct list_head k_list; + void (*get)(struct klist_node *); + void (*put)(struct klist_node *); }; -extern void klist_init(struct klist * k); - +extern void klist_init(struct klist * k, void (*get)(struct klist_node *), + void (*put)(struct klist_node *)); struct klist_node { struct klist * n_klist; @@ -31,8 +36,8 @@ struct klist_node { struct completion n_removed; }; -extern void klist_add_tail(struct klist * k, struct klist_node * n); -extern void klist_add_head(struct klist * k, struct klist_node * n); +extern void klist_add_tail(struct klist_node * n, struct klist * k); +extern void klist_add_head(struct klist_node * n, struct klist * k); extern void klist_del(struct klist_node * n); extern void klist_remove(struct klist_node * n); @@ -53,3 +58,4 @@ extern void klist_iter_init_node(struct klist * k, struct klist_iter * i, extern void klist_iter_exit(struct klist_iter * i); extern struct klist_node * klist_next(struct klist_iter * i); +#endif diff --git a/include/linux/kprobes.h b/include/linux/kprobes.h index e050fc2d4c26..e30afdca7917 100644 --- a/include/linux/kprobes.h +++ b/include/linux/kprobes.h @@ -42,6 +42,9 @@ #define KPROBE_REENTER 0x00000004 #define KPROBE_HIT_SSDONE 0x00000008 +/* Attach to insert probes on any functions which should be ignored*/ +#define __kprobes __attribute__((__section__(".kprobes.text"))) + struct kprobe; struct pt_regs; struct kretprobe; diff --git a/include/linux/libata.h b/include/linux/libata.h index fc05a9899288..022105c745fc 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -40,7 +40,6 @@ #undef ATA_VERBOSE_DEBUG /* yet more debugging output */ #undef ATA_IRQ_TRAP /* define to ack screaming irqs */ #undef ATA_NDEBUG /* define to disable quick runtime checks */ -#undef ATA_ENABLE_ATAPI /* define to enable ATAPI support */ #undef ATA_ENABLE_PATA /* define to enable PATA support in some * low-level drivers */ #undef ATAPI_ENABLE_DMADIR /* enables ATAPI DMADIR bridge support */ @@ -450,6 +449,7 @@ struct pci_bits { unsigned long val; }; +extern void ata_pci_host_stop (struct ata_host_set *host_set); extern struct ata_probe_ent * ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port); extern int pci_test_config_bits(struct pci_dev *pdev, struct pci_bits *bits); diff --git a/include/linux/linkage.h b/include/linux/linkage.h index 338f7795d8a0..147eb01e0d4b 100644 --- a/include/linux/linkage.h +++ b/include/linux/linkage.h @@ -33,6 +33,13 @@ ALIGN; \ name: +#define KPROBE_ENTRY(name) \ + .section .kprobes.text, "ax"; \ + .globl name; \ + ALIGN; \ + name: + + #endif #define NORET_TYPE /**/ diff --git a/include/linux/mempolicy.h b/include/linux/mempolicy.h index 8480aef10e62..58385ee1c0ac 100644 --- a/include/linux/mempolicy.h +++ b/include/linux/mempolicy.h @@ -150,8 +150,12 @@ void mpol_free_shared_policy(struct shared_policy *p); struct mempolicy *mpol_shared_policy_lookup(struct shared_policy *sp, unsigned long idx); +struct mempolicy *get_vma_policy(struct task_struct *task, + struct vm_area_struct *vma, unsigned long addr); + extern void numa_default_policy(void); extern void numa_policy_init(void); +extern struct mempolicy default_policy; #else diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h index aefedf04b9bb..18fc77f682de 100644 --- a/include/linux/mmc/card.h +++ b/include/linux/mmc/card.h @@ -33,6 +33,13 @@ struct mmc_csd { unsigned int capacity; }; +struct sd_scr { + unsigned char sda_vsn; + unsigned char bus_widths; +#define SD_SCR_BUS_WIDTH_1 (1<<0) +#define SD_SCR_BUS_WIDTH_4 (1<<2) +}; + struct mmc_host; /* @@ -47,19 +54,27 @@ struct mmc_card { #define MMC_STATE_PRESENT (1<<0) /* present in sysfs */ #define MMC_STATE_DEAD (1<<1) /* device no longer in stack */ #define MMC_STATE_BAD (1<<2) /* unrecognised device */ +#define MMC_STATE_SDCARD (1<<3) /* is an SD card */ +#define MMC_STATE_READONLY (1<<4) /* card is read-only */ u32 raw_cid[4]; /* raw card CID */ u32 raw_csd[4]; /* raw card CSD */ + u32 raw_scr[2]; /* raw card SCR */ struct mmc_cid cid; /* card identification */ struct mmc_csd csd; /* card specific */ + struct sd_scr scr; /* extra SD information */ }; #define mmc_card_present(c) ((c)->state & MMC_STATE_PRESENT) #define mmc_card_dead(c) ((c)->state & MMC_STATE_DEAD) #define mmc_card_bad(c) ((c)->state & MMC_STATE_BAD) +#define mmc_card_sd(c) ((c)->state & MMC_STATE_SDCARD) +#define mmc_card_readonly(c) ((c)->state & MMC_STATE_READONLY) #define mmc_card_set_present(c) ((c)->state |= MMC_STATE_PRESENT) #define mmc_card_set_dead(c) ((c)->state |= MMC_STATE_DEAD) #define mmc_card_set_bad(c) ((c)->state |= MMC_STATE_BAD) +#define mmc_card_set_sd(c) ((c)->state |= MMC_STATE_SDCARD) +#define mmc_card_set_readonly(c) ((c)->state |= MMC_STATE_READONLY) #define mmc_card_name(c) ((c)->cid.prod_name) #define mmc_card_id(c) ((c)->dev.bus_id) diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index 9a0893f3249e..c1f021eddffa 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -46,16 +46,28 @@ struct mmc_ios { #define MMC_BUSMODE_OPENDRAIN 1 #define MMC_BUSMODE_PUSHPULL 2 + unsigned char chip_select; /* SPI chip select */ + +#define MMC_CS_DONTCARE 0 +#define MMC_CS_HIGH 1 +#define MMC_CS_LOW 2 + unsigned char power_mode; /* power supply mode */ #define MMC_POWER_OFF 0 #define MMC_POWER_UP 1 #define MMC_POWER_ON 2 + + unsigned char bus_width; /* data bus width */ + +#define MMC_BUS_WIDTH_1 0 +#define MMC_BUS_WIDTH_4 2 }; struct mmc_host_ops { void (*request)(struct mmc_host *host, struct mmc_request *req); void (*set_ios)(struct mmc_host *host, struct mmc_ios *ios); + int (*get_ro)(struct mmc_host *host); }; struct mmc_card; @@ -70,6 +82,10 @@ struct mmc_host { unsigned int f_max; u32 ocr_avail; + unsigned long caps; /* Host capabilities */ + +#define MMC_CAP_4_BIT_DATA (1 << 0) /* Can the host do 4 bit transfers */ + /* host specific block data */ unsigned int max_seg_size; /* see blk_queue_max_segment_size */ unsigned short max_hw_segs; /* see blk_queue_max_hw_segments */ @@ -81,6 +97,10 @@ struct mmc_host { struct mmc_ios ios; /* current io bus settings */ u32 ocr; /* the current OCR setting */ + unsigned int mode; /* current card mode of host */ +#define MMC_MODE_MMC 0 +#define MMC_MODE_SD 1 + struct list_head cards; /* devices attached to this host */ wait_queue_head_t wq; @@ -89,6 +109,8 @@ struct mmc_host { struct mmc_card *card_selected; /* the selected MMC card */ struct work_struct detect; + + unsigned long private[0] ____cacheline_aligned; }; extern struct mmc_host *mmc_alloc_host(int extra, struct device *); @@ -96,14 +118,18 @@ extern int mmc_add_host(struct mmc_host *); extern void mmc_remove_host(struct mmc_host *); extern void mmc_free_host(struct mmc_host *); -#define mmc_priv(x) ((void *)((x) + 1)) +static inline void *mmc_priv(struct mmc_host *host) +{ + return (void *)host->private; +} + #define mmc_dev(x) ((x)->dev) #define mmc_hostname(x) ((x)->class_dev.class_id) extern int mmc_suspend_host(struct mmc_host *, pm_message_t); extern int mmc_resume_host(struct mmc_host *); -extern void mmc_detect_change(struct mmc_host *); +extern void mmc_detect_change(struct mmc_host *, unsigned long delay); extern void mmc_request_done(struct mmc_host *, struct mmc_request *); #endif diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h index 0d35d4ffb360..1ab78e8d6c53 100644 --- a/include/linux/mmc/mmc.h +++ b/include/linux/mmc/mmc.h @@ -88,6 +88,8 @@ struct mmc_card; extern int mmc_wait_for_req(struct mmc_host *, struct mmc_request *); extern int mmc_wait_for_cmd(struct mmc_host *, struct mmc_command *, int); +extern int mmc_wait_for_app_cmd(struct mmc_host *, unsigned int, + struct mmc_command *, int); extern int __mmc_claim_host(struct mmc_host *host, struct mmc_card *card); diff --git a/include/linux/mmc/protocol.h b/include/linux/mmc/protocol.h index 896342817b97..f819cae92266 100644 --- a/include/linux/mmc/protocol.h +++ b/include/linux/mmc/protocol.h @@ -236,5 +236,12 @@ struct _mmc_csd { #define CSD_SPEC_VER_2 2 /* Implements system specification 2.0 - 2.2 */ #define CSD_SPEC_VER_3 3 /* Implements system specification 3.1 */ + +/* + * SD bus widths + */ +#define SD_BUS_WIDTH_1 0 +#define SD_BUS_WIDTH_4 2 + #endif /* MMC_MMC_PROTOCOL_H */ diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h index 6c90461ed99f..5ed471b58f4f 100644 --- a/include/linux/mmzone.h +++ b/include/linux/mmzone.h @@ -487,11 +487,27 @@ struct mem_section { unsigned long section_mem_map; }; -extern struct mem_section mem_section[NR_MEM_SECTIONS]; +#ifdef CONFIG_SPARSEMEM_EXTREME +#define SECTIONS_PER_ROOT (PAGE_SIZE / sizeof (struct mem_section)) +#else +#define SECTIONS_PER_ROOT 1 +#endif + +#define SECTION_NR_TO_ROOT(sec) ((sec) / SECTIONS_PER_ROOT) +#define NR_SECTION_ROOTS (NR_MEM_SECTIONS / SECTIONS_PER_ROOT) +#define SECTION_ROOT_MASK (SECTIONS_PER_ROOT - 1) + +#ifdef CONFIG_SPARSEMEM_EXTREME +extern struct mem_section *mem_section[NR_SECTION_ROOTS]; +#else +extern struct mem_section mem_section[NR_SECTION_ROOTS][SECTIONS_PER_ROOT]; +#endif static inline struct mem_section *__nr_to_section(unsigned long nr) { - return &mem_section[nr]; + if (!mem_section[SECTION_NR_TO_ROOT(nr)]) + return NULL; + return &mem_section[SECTION_NR_TO_ROOT(nr)][nr & SECTION_ROOT_MASK]; } /* @@ -513,12 +529,12 @@ static inline struct page *__section_mem_map_addr(struct mem_section *section) static inline int valid_section(struct mem_section *section) { - return (section->section_mem_map & SECTION_MARKED_PRESENT); + return (section && (section->section_mem_map & SECTION_MARKED_PRESENT)); } static inline int section_has_mem_map(struct mem_section *section) { - return (section->section_mem_map & SECTION_HAS_MEM_MAP); + return (section && (section->section_mem_map & SECTION_HAS_MEM_MAP)); } static inline int valid_section_nr(unsigned long nr) @@ -572,6 +588,7 @@ static inline int pfn_valid(unsigned long pfn) void sparse_init(void); #else #define sparse_init() do {} while (0) +#define sparse_index_init(_sec, _nid) do {} while (0) #endif /* CONFIG_SPARSEMEM */ #ifdef CONFIG_NODES_SPAN_OTHER_NODES diff --git a/include/linux/msg.h b/include/linux/msg.h index 2c4c6aa643ff..903e0ab8101f 100644 --- a/include/linux/msg.h +++ b/include/linux/msg.h @@ -77,6 +77,7 @@ struct msg_msg { /* one msq_queue structure for each present queue on the system */ struct msg_queue { struct kern_ipc_perm q_perm; + int q_id; time_t q_stime; /* last msgsnd time */ time_t q_rtime; /* last msgrcv time */ time_t q_ctime; /* last change time */ diff --git a/include/linux/mv643xx.h b/include/linux/mv643xx.h index 5773ea42f6e4..0b08cd692201 100644 --- a/include/linux/mv643xx.h +++ b/include/linux/mv643xx.h @@ -980,7 +980,7 @@ /* I2C Registers */ /****************************************/ -#define MV64XXX_I2C_CTLR_NAME "mv64xxx i2c" +#define MV64XXX_I2C_CTLR_NAME "mv64xxx_i2c" #define MV64XXX_I2C_OFFSET 0xc000 #define MV64XXX_I2C_REG_BLOCK_SIZE 0x0020 diff --git a/include/linux/netfilter_ipv4/ip_conntrack.h b/include/linux/netfilter_ipv4/ip_conntrack.h index 088742befe49..7e033e9271a8 100644 --- a/include/linux/netfilter_ipv4/ip_conntrack.h +++ b/include/linux/netfilter_ipv4/ip_conntrack.h @@ -263,6 +263,9 @@ struct ip_conntrack_expect /* Unique ID */ unsigned int id; + /* Flags */ + unsigned int flags; + #ifdef CONFIG_IP_NF_NAT_NEEDED /* This is the original per-proto part, used to map the * expected connection the way the recipient expects. */ @@ -272,6 +275,8 @@ struct ip_conntrack_expect #endif }; +#define IP_CT_EXPECT_PERMANENT 0x1 + static inline struct ip_conntrack * tuplehash_to_ctrack(const struct ip_conntrack_tuple_hash *hash) { diff --git a/include/linux/netfilter_ipv4/ip_conntrack_core.h b/include/linux/netfilter_ipv4/ip_conntrack_core.h index dc4d2a0575de..907d4f5ca5dc 100644 --- a/include/linux/netfilter_ipv4/ip_conntrack_core.h +++ b/include/linux/netfilter_ipv4/ip_conntrack_core.h @@ -52,7 +52,7 @@ static inline int ip_conntrack_confirm(struct sk_buff **pskb) return ret; } -extern void __ip_ct_expect_unlink_destroy(struct ip_conntrack_expect *exp); +extern void ip_ct_unlink_expect(struct ip_conntrack_expect *exp); extern struct list_head *ip_conntrack_hash; extern struct list_head ip_conntrack_expect_list; diff --git a/include/linux/netfilter_ipv4/ip_nat_rule.h b/include/linux/netfilter_ipv4/ip_nat_rule.h index fecd2a06dcd8..73b9552e6a89 100644 --- a/include/linux/netfilter_ipv4/ip_nat_rule.h +++ b/include/linux/netfilter_ipv4/ip_nat_rule.h @@ -19,5 +19,10 @@ extern unsigned int alloc_null_binding(struct ip_conntrack *conntrack, struct ip_nat_info *info, unsigned int hooknum); + +extern unsigned int +alloc_null_binding_confirmed(struct ip_conntrack *conntrack, + struct ip_nat_info *info, + unsigned int hooknum); #endif #endif /* _IP_NAT_RULE_H */ diff --git a/include/linux/page-flags.h b/include/linux/page-flags.h index f5a6695d4d21..f34767c5fc79 100644 --- a/include/linux/page-flags.h +++ b/include/linux/page-flags.h @@ -134,6 +134,7 @@ struct page_state { }; extern void get_page_state(struct page_state *ret); +extern void get_page_state_node(struct page_state *ret, int node); extern void get_full_page_state(struct page_state *ret); extern unsigned long __read_page_state(unsigned long offset); extern void __mod_page_state(unsigned long offset, unsigned long delta); @@ -194,6 +195,7 @@ extern void __mod_page_state(unsigned long offset, unsigned long delta); #define SetPageDirty(page) set_bit(PG_dirty, &(page)->flags) #define TestSetPageDirty(page) test_and_set_bit(PG_dirty, &(page)->flags) #define ClearPageDirty(page) clear_bit(PG_dirty, &(page)->flags) +#define __ClearPageDirty(page) __clear_bit(PG_dirty, &(page)->flags) #define TestClearPageDirty(page) test_and_clear_bit(PG_dirty, &(page)->flags) #define SetPageLRU(page) set_bit(PG_lru, &(page)->flags) diff --git a/include/linux/pci.h b/include/linux/pci.h index bc4c40000c0d..7349058ed778 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -19,436 +19,10 @@ #include <linux/mod_devicetable.h> -/* - * Under PCI, each device has 256 bytes of configuration address space, - * of which the first 64 bytes are standardized as follows: - */ -#define PCI_VENDOR_ID 0x00 /* 16 bits */ -#define PCI_DEVICE_ID 0x02 /* 16 bits */ -#define PCI_COMMAND 0x04 /* 16 bits */ -#define PCI_COMMAND_IO 0x1 /* Enable response in I/O space */ -#define PCI_COMMAND_MEMORY 0x2 /* Enable response in Memory space */ -#define PCI_COMMAND_MASTER 0x4 /* Enable bus mastering */ -#define PCI_COMMAND_SPECIAL 0x8 /* Enable response to special cycles */ -#define PCI_COMMAND_INVALIDATE 0x10 /* Use memory write and invalidate */ -#define PCI_COMMAND_VGA_PALETTE 0x20 /* Enable palette snooping */ -#define PCI_COMMAND_PARITY 0x40 /* Enable parity checking */ -#define PCI_COMMAND_WAIT 0x80 /* Enable address/data stepping */ -#define PCI_COMMAND_SERR 0x100 /* Enable SERR */ -#define PCI_COMMAND_FAST_BACK 0x200 /* Enable back-to-back writes */ -#define PCI_COMMAND_INTX_DISABLE 0x400 /* INTx Emulation Disable */ - -#define PCI_STATUS 0x06 /* 16 bits */ -#define PCI_STATUS_CAP_LIST 0x10 /* Support Capability List */ -#define PCI_STATUS_66MHZ 0x20 /* Support 66 Mhz PCI 2.1 bus */ -#define PCI_STATUS_UDF 0x40 /* Support User Definable Features [obsolete] */ -#define PCI_STATUS_FAST_BACK 0x80 /* Accept fast-back to back */ -#define PCI_STATUS_PARITY 0x100 /* Detected parity error */ -#define PCI_STATUS_DEVSEL_MASK 0x600 /* DEVSEL timing */ -#define PCI_STATUS_DEVSEL_FAST 0x000 -#define PCI_STATUS_DEVSEL_MEDIUM 0x200 -#define PCI_STATUS_DEVSEL_SLOW 0x400 -#define PCI_STATUS_SIG_TARGET_ABORT 0x800 /* Set on target abort */ -#define PCI_STATUS_REC_TARGET_ABORT 0x1000 /* Master ack of " */ -#define PCI_STATUS_REC_MASTER_ABORT 0x2000 /* Set on master abort */ -#define PCI_STATUS_SIG_SYSTEM_ERROR 0x4000 /* Set when we drive SERR */ -#define PCI_STATUS_DETECTED_PARITY 0x8000 /* Set on parity error */ - -#define PCI_CLASS_REVISION 0x08 /* High 24 bits are class, low 8 - revision */ -#define PCI_REVISION_ID 0x08 /* Revision ID */ -#define PCI_CLASS_PROG 0x09 /* Reg. Level Programming Interface */ -#define PCI_CLASS_DEVICE 0x0a /* Device class */ - -#define PCI_CACHE_LINE_SIZE 0x0c /* 8 bits */ -#define PCI_LATENCY_TIMER 0x0d /* 8 bits */ -#define PCI_HEADER_TYPE 0x0e /* 8 bits */ -#define PCI_HEADER_TYPE_NORMAL 0 -#define PCI_HEADER_TYPE_BRIDGE 1 -#define PCI_HEADER_TYPE_CARDBUS 2 - -#define PCI_BIST 0x0f /* 8 bits */ -#define PCI_BIST_CODE_MASK 0x0f /* Return result */ -#define PCI_BIST_START 0x40 /* 1 to start BIST, 2 secs or less */ -#define PCI_BIST_CAPABLE 0x80 /* 1 if BIST capable */ - -/* - * Base addresses specify locations in memory or I/O space. - * Decoded size can be determined by writing a value of - * 0xffffffff to the register, and reading it back. Only - * 1 bits are decoded. - */ -#define PCI_BASE_ADDRESS_0 0x10 /* 32 bits */ -#define PCI_BASE_ADDRESS_1 0x14 /* 32 bits [htype 0,1 only] */ -#define PCI_BASE_ADDRESS_2 0x18 /* 32 bits [htype 0 only] */ -#define PCI_BASE_ADDRESS_3 0x1c /* 32 bits */ -#define PCI_BASE_ADDRESS_4 0x20 /* 32 bits */ -#define PCI_BASE_ADDRESS_5 0x24 /* 32 bits */ -#define PCI_BASE_ADDRESS_SPACE 0x01 /* 0 = memory, 1 = I/O */ -#define PCI_BASE_ADDRESS_SPACE_IO 0x01 -#define PCI_BASE_ADDRESS_SPACE_MEMORY 0x00 -#define PCI_BASE_ADDRESS_MEM_TYPE_MASK 0x06 -#define PCI_BASE_ADDRESS_MEM_TYPE_32 0x00 /* 32 bit address */ -#define PCI_BASE_ADDRESS_MEM_TYPE_1M 0x02 /* Below 1M [obsolete] */ -#define PCI_BASE_ADDRESS_MEM_TYPE_64 0x04 /* 64 bit address */ -#define PCI_BASE_ADDRESS_MEM_PREFETCH 0x08 /* prefetchable? */ -#define PCI_BASE_ADDRESS_MEM_MASK (~0x0fUL) -#define PCI_BASE_ADDRESS_IO_MASK (~0x03UL) -/* bit 1 is reserved if address_space = 1 */ - -/* Header type 0 (normal devices) */ -#define PCI_CARDBUS_CIS 0x28 -#define PCI_SUBSYSTEM_VENDOR_ID 0x2c -#define PCI_SUBSYSTEM_ID 0x2e -#define PCI_ROM_ADDRESS 0x30 /* Bits 31..11 are address, 10..1 reserved */ -#define PCI_ROM_ADDRESS_ENABLE 0x01 -#define PCI_ROM_ADDRESS_MASK (~0x7ffUL) - -#define PCI_CAPABILITY_LIST 0x34 /* Offset of first capability list entry */ - -/* 0x35-0x3b are reserved */ -#define PCI_INTERRUPT_LINE 0x3c /* 8 bits */ -#define PCI_INTERRUPT_PIN 0x3d /* 8 bits */ -#define PCI_MIN_GNT 0x3e /* 8 bits */ -#define PCI_MAX_LAT 0x3f /* 8 bits */ - -/* Header type 1 (PCI-to-PCI bridges) */ -#define PCI_PRIMARY_BUS 0x18 /* Primary bus number */ -#define PCI_SECONDARY_BUS 0x19 /* Secondary bus number */ -#define PCI_SUBORDINATE_BUS 0x1a /* Highest bus number behind the bridge */ -#define PCI_SEC_LATENCY_TIMER 0x1b /* Latency timer for secondary interface */ -#define PCI_IO_BASE 0x1c /* I/O range behind the bridge */ -#define PCI_IO_LIMIT 0x1d -#define PCI_IO_RANGE_TYPE_MASK 0x0fUL /* I/O bridging type */ -#define PCI_IO_RANGE_TYPE_16 0x00 -#define PCI_IO_RANGE_TYPE_32 0x01 -#define PCI_IO_RANGE_MASK (~0x0fUL) -#define PCI_SEC_STATUS 0x1e /* Secondary status register, only bit 14 used */ -#define PCI_MEMORY_BASE 0x20 /* Memory range behind */ -#define PCI_MEMORY_LIMIT 0x22 -#define PCI_MEMORY_RANGE_TYPE_MASK 0x0fUL -#define PCI_MEMORY_RANGE_MASK (~0x0fUL) -#define PCI_PREF_MEMORY_BASE 0x24 /* Prefetchable memory range behind */ -#define PCI_PREF_MEMORY_LIMIT 0x26 -#define PCI_PREF_RANGE_TYPE_MASK 0x0fUL -#define PCI_PREF_RANGE_TYPE_32 0x00 -#define PCI_PREF_RANGE_TYPE_64 0x01 -#define PCI_PREF_RANGE_MASK (~0x0fUL) -#define PCI_PREF_BASE_UPPER32 0x28 /* Upper half of prefetchable memory range */ -#define PCI_PREF_LIMIT_UPPER32 0x2c -#define PCI_IO_BASE_UPPER16 0x30 /* Upper half of I/O addresses */ -#define PCI_IO_LIMIT_UPPER16 0x32 -/* 0x34 same as for htype 0 */ -/* 0x35-0x3b is reserved */ -#define PCI_ROM_ADDRESS1 0x38 /* Same as PCI_ROM_ADDRESS, but for htype 1 */ -/* 0x3c-0x3d are same as for htype 0 */ -#define PCI_BRIDGE_CONTROL 0x3e -#define PCI_BRIDGE_CTL_PARITY 0x01 /* Enable parity detection on secondary interface */ -#define PCI_BRIDGE_CTL_SERR 0x02 /* The same for SERR forwarding */ -#define PCI_BRIDGE_CTL_NO_ISA 0x04 /* Disable bridging of ISA ports */ -#define PCI_BRIDGE_CTL_VGA 0x08 /* Forward VGA addresses */ -#define PCI_BRIDGE_CTL_MASTER_ABORT 0x20 /* Report master aborts */ -#define PCI_BRIDGE_CTL_BUS_RESET 0x40 /* Secondary bus reset */ -#define PCI_BRIDGE_CTL_FAST_BACK 0x80 /* Fast Back2Back enabled on secondary interface */ - -/* Header type 2 (CardBus bridges) */ -#define PCI_CB_CAPABILITY_LIST 0x14 -/* 0x15 reserved */ -#define PCI_CB_SEC_STATUS 0x16 /* Secondary status */ -#define PCI_CB_PRIMARY_BUS 0x18 /* PCI bus number */ -#define PCI_CB_CARD_BUS 0x19 /* CardBus bus number */ -#define PCI_CB_SUBORDINATE_BUS 0x1a /* Subordinate bus number */ -#define PCI_CB_LATENCY_TIMER 0x1b /* CardBus latency timer */ -#define PCI_CB_MEMORY_BASE_0 0x1c -#define PCI_CB_MEMORY_LIMIT_0 0x20 -#define PCI_CB_MEMORY_BASE_1 0x24 -#define PCI_CB_MEMORY_LIMIT_1 0x28 -#define PCI_CB_IO_BASE_0 0x2c -#define PCI_CB_IO_BASE_0_HI 0x2e -#define PCI_CB_IO_LIMIT_0 0x30 -#define PCI_CB_IO_LIMIT_0_HI 0x32 -#define PCI_CB_IO_BASE_1 0x34 -#define PCI_CB_IO_BASE_1_HI 0x36 -#define PCI_CB_IO_LIMIT_1 0x38 -#define PCI_CB_IO_LIMIT_1_HI 0x3a -#define PCI_CB_IO_RANGE_MASK (~0x03UL) -/* 0x3c-0x3d are same as for htype 0 */ -#define PCI_CB_BRIDGE_CONTROL 0x3e -#define PCI_CB_BRIDGE_CTL_PARITY 0x01 /* Similar to standard bridge control register */ -#define PCI_CB_BRIDGE_CTL_SERR 0x02 -#define PCI_CB_BRIDGE_CTL_ISA 0x04 -#define PCI_CB_BRIDGE_CTL_VGA 0x08 -#define PCI_CB_BRIDGE_CTL_MASTER_ABORT 0x20 -#define PCI_CB_BRIDGE_CTL_CB_RESET 0x40 /* CardBus reset */ -#define PCI_CB_BRIDGE_CTL_16BIT_INT 0x80 /* Enable interrupt for 16-bit cards */ -#define PCI_CB_BRIDGE_CTL_PREFETCH_MEM0 0x100 /* Prefetch enable for both memory regions */ -#define PCI_CB_BRIDGE_CTL_PREFETCH_MEM1 0x200 -#define PCI_CB_BRIDGE_CTL_POST_WRITES 0x400 -#define PCI_CB_SUBSYSTEM_VENDOR_ID 0x40 -#define PCI_CB_SUBSYSTEM_ID 0x42 -#define PCI_CB_LEGACY_MODE_BASE 0x44 /* 16-bit PC Card legacy mode base address (ExCa) */ -/* 0x48-0x7f reserved */ - -/* Capability lists */ - -#define PCI_CAP_LIST_ID 0 /* Capability ID */ -#define PCI_CAP_ID_PM 0x01 /* Power Management */ -#define PCI_CAP_ID_AGP 0x02 /* Accelerated Graphics Port */ -#define PCI_CAP_ID_VPD 0x03 /* Vital Product Data */ -#define PCI_CAP_ID_SLOTID 0x04 /* Slot Identification */ -#define PCI_CAP_ID_MSI 0x05 /* Message Signalled Interrupts */ -#define PCI_CAP_ID_CHSWP 0x06 /* CompactPCI HotSwap */ -#define PCI_CAP_ID_PCIX 0x07 /* PCI-X */ -#define PCI_CAP_ID_SHPC 0x0C /* PCI Standard Hot-Plug Controller */ -#define PCI_CAP_ID_EXP 0x10 /* PCI Express */ -#define PCI_CAP_ID_MSIX 0x11 /* MSI-X */ -#define PCI_CAP_LIST_NEXT 1 /* Next capability in the list */ -#define PCI_CAP_FLAGS 2 /* Capability defined flags (16 bits) */ -#define PCI_CAP_SIZEOF 4 - -/* Power Management Registers */ - -#define PCI_PM_PMC 2 /* PM Capabilities Register */ -#define PCI_PM_CAP_VER_MASK 0x0007 /* Version */ -#define PCI_PM_CAP_PME_CLOCK 0x0008 /* PME clock required */ -#define PCI_PM_CAP_RESERVED 0x0010 /* Reserved field */ -#define PCI_PM_CAP_DSI 0x0020 /* Device specific initialization */ -#define PCI_PM_CAP_AUX_POWER 0x01C0 /* Auxilliary power support mask */ -#define PCI_PM_CAP_D1 0x0200 /* D1 power state support */ -#define PCI_PM_CAP_D2 0x0400 /* D2 power state support */ -#define PCI_PM_CAP_PME 0x0800 /* PME pin supported */ -#define PCI_PM_CAP_PME_MASK 0xF800 /* PME Mask of all supported states */ -#define PCI_PM_CAP_PME_D0 0x0800 /* PME# from D0 */ -#define PCI_PM_CAP_PME_D1 0x1000 /* PME# from D1 */ -#define PCI_PM_CAP_PME_D2 0x2000 /* PME# from D2 */ -#define PCI_PM_CAP_PME_D3 0x4000 /* PME# from D3 (hot) */ -#define PCI_PM_CAP_PME_D3cold 0x8000 /* PME# from D3 (cold) */ -#define PCI_PM_CTRL 4 /* PM control and status register */ -#define PCI_PM_CTRL_STATE_MASK 0x0003 /* Current power state (D0 to D3) */ -#define PCI_PM_CTRL_PME_ENABLE 0x0100 /* PME pin enable */ -#define PCI_PM_CTRL_DATA_SEL_MASK 0x1e00 /* Data select (??) */ -#define PCI_PM_CTRL_DATA_SCALE_MASK 0x6000 /* Data scale (??) */ -#define PCI_PM_CTRL_PME_STATUS 0x8000 /* PME pin status */ -#define PCI_PM_PPB_EXTENSIONS 6 /* PPB support extensions (??) */ -#define PCI_PM_PPB_B2_B3 0x40 /* Stop clock when in D3hot (??) */ -#define PCI_PM_BPCC_ENABLE 0x80 /* Bus power/clock control enable (??) */ -#define PCI_PM_DATA_REGISTER 7 /* (??) */ -#define PCI_PM_SIZEOF 8 - -/* AGP registers */ - -#define PCI_AGP_VERSION 2 /* BCD version number */ -#define PCI_AGP_RFU 3 /* Rest of capability flags */ -#define PCI_AGP_STATUS 4 /* Status register */ -#define PCI_AGP_STATUS_RQ_MASK 0xff000000 /* Maximum number of requests - 1 */ -#define PCI_AGP_STATUS_SBA 0x0200 /* Sideband addressing supported */ -#define PCI_AGP_STATUS_64BIT 0x0020 /* 64-bit addressing supported */ -#define PCI_AGP_STATUS_FW 0x0010 /* FW transfers supported */ -#define PCI_AGP_STATUS_RATE4 0x0004 /* 4x transfer rate supported */ -#define PCI_AGP_STATUS_RATE2 0x0002 /* 2x transfer rate supported */ -#define PCI_AGP_STATUS_RATE1 0x0001 /* 1x transfer rate supported */ -#define PCI_AGP_COMMAND 8 /* Control register */ -#define PCI_AGP_COMMAND_RQ_MASK 0xff000000 /* Master: Maximum number of requests */ -#define PCI_AGP_COMMAND_SBA 0x0200 /* Sideband addressing enabled */ -#define PCI_AGP_COMMAND_AGP 0x0100 /* Allow processing of AGP transactions */ -#define PCI_AGP_COMMAND_64BIT 0x0020 /* Allow processing of 64-bit addresses */ -#define PCI_AGP_COMMAND_FW 0x0010 /* Force FW transfers */ -#define PCI_AGP_COMMAND_RATE4 0x0004 /* Use 4x rate */ -#define PCI_AGP_COMMAND_RATE2 0x0002 /* Use 2x rate */ -#define PCI_AGP_COMMAND_RATE1 0x0001 /* Use 1x rate */ -#define PCI_AGP_SIZEOF 12 - -/* Vital Product Data */ - -#define PCI_VPD_ADDR 2 /* Address to access (15 bits!) */ -#define PCI_VPD_ADDR_MASK 0x7fff /* Address mask */ -#define PCI_VPD_ADDR_F 0x8000 /* Write 0, 1 indicates completion */ -#define PCI_VPD_DATA 4 /* 32-bits of data returned here */ - -/* Slot Identification */ - -#define PCI_SID_ESR 2 /* Expansion Slot Register */ -#define PCI_SID_ESR_NSLOTS 0x1f /* Number of expansion slots available */ -#define PCI_SID_ESR_FIC 0x20 /* First In Chassis Flag */ -#define PCI_SID_CHASSIS_NR 3 /* Chassis Number */ - -/* Message Signalled Interrupts registers */ - -#define PCI_MSI_FLAGS 2 /* Various flags */ -#define PCI_MSI_FLAGS_64BIT 0x80 /* 64-bit addresses allowed */ -#define PCI_MSI_FLAGS_QSIZE 0x70 /* Message queue size configured */ -#define PCI_MSI_FLAGS_QMASK 0x0e /* Maximum queue size available */ -#define PCI_MSI_FLAGS_ENABLE 0x01 /* MSI feature enabled */ -#define PCI_MSI_FLAGS_MASKBIT 0x100 /* 64-bit mask bits allowed */ -#define PCI_MSI_RFU 3 /* Rest of capability flags */ -#define PCI_MSI_ADDRESS_LO 4 /* Lower 32 bits */ -#define PCI_MSI_ADDRESS_HI 8 /* Upper 32 bits (if PCI_MSI_FLAGS_64BIT set) */ -#define PCI_MSI_DATA_32 8 /* 16 bits of data for 32-bit devices */ -#define PCI_MSI_DATA_64 12 /* 16 bits of data for 64-bit devices */ -#define PCI_MSI_MASK_BIT 16 /* Mask bits register */ - -/* CompactPCI Hotswap Register */ - -#define PCI_CHSWP_CSR 2 /* Control and Status Register */ -#define PCI_CHSWP_DHA 0x01 /* Device Hiding Arm */ -#define PCI_CHSWP_EIM 0x02 /* ENUM# Signal Mask */ -#define PCI_CHSWP_PIE 0x04 /* Pending Insert or Extract */ -#define PCI_CHSWP_LOO 0x08 /* LED On / Off */ -#define PCI_CHSWP_PI 0x30 /* Programming Interface */ -#define PCI_CHSWP_EXT 0x40 /* ENUM# status - extraction */ -#define PCI_CHSWP_INS 0x80 /* ENUM# status - insertion */ - -/* PCI-X registers */ - -#define PCI_X_CMD 2 /* Modes & Features */ -#define PCI_X_CMD_DPERR_E 0x0001 /* Data Parity Error Recovery Enable */ -#define PCI_X_CMD_ERO 0x0002 /* Enable Relaxed Ordering */ -#define PCI_X_CMD_MAX_READ 0x000c /* Max Memory Read Byte Count */ -#define PCI_X_CMD_MAX_SPLIT 0x0070 /* Max Outstanding Split Transactions */ -#define PCI_X_CMD_VERSION(x) (((x) >> 12) & 3) /* Version */ -#define PCI_X_STATUS 4 /* PCI-X capabilities */ -#define PCI_X_STATUS_DEVFN 0x000000ff /* A copy of devfn */ -#define PCI_X_STATUS_BUS 0x0000ff00 /* A copy of bus nr */ -#define PCI_X_STATUS_64BIT 0x00010000 /* 64-bit device */ -#define PCI_X_STATUS_133MHZ 0x00020000 /* 133 MHz capable */ -#define PCI_X_STATUS_SPL_DISC 0x00040000 /* Split Completion Discarded */ -#define PCI_X_STATUS_UNX_SPL 0x00080000 /* Unexpected Split Completion */ -#define PCI_X_STATUS_COMPLEX 0x00100000 /* Device Complexity */ -#define PCI_X_STATUS_MAX_READ 0x00600000 /* Designed Max Memory Read Count */ -#define PCI_X_STATUS_MAX_SPLIT 0x03800000 /* Designed Max Outstanding Split Transactions */ -#define PCI_X_STATUS_MAX_CUM 0x1c000000 /* Designed Max Cumulative Read Size */ -#define PCI_X_STATUS_SPL_ERR 0x20000000 /* Rcvd Split Completion Error Msg */ -#define PCI_X_STATUS_266MHZ 0x40000000 /* 266 MHz capable */ -#define PCI_X_STATUS_533MHZ 0x80000000 /* 533 MHz capable */ - -/* PCI Express capability registers */ - -#define PCI_EXP_FLAGS 2 /* Capabilities register */ -#define PCI_EXP_FLAGS_VERS 0x000f /* Capability version */ -#define PCI_EXP_FLAGS_TYPE 0x00f0 /* Device/Port type */ -#define PCI_EXP_TYPE_ENDPOINT 0x0 /* Express Endpoint */ -#define PCI_EXP_TYPE_LEG_END 0x1 /* Legacy Endpoint */ -#define PCI_EXP_TYPE_ROOT_PORT 0x4 /* Root Port */ -#define PCI_EXP_TYPE_UPSTREAM 0x5 /* Upstream Port */ -#define PCI_EXP_TYPE_DOWNSTREAM 0x6 /* Downstream Port */ -#define PCI_EXP_TYPE_PCI_BRIDGE 0x7 /* PCI/PCI-X Bridge */ -#define PCI_EXP_FLAGS_SLOT 0x0100 /* Slot implemented */ -#define PCI_EXP_FLAGS_IRQ 0x3e00 /* Interrupt message number */ -#define PCI_EXP_DEVCAP 4 /* Device capabilities */ -#define PCI_EXP_DEVCAP_PAYLOAD 0x07 /* Max_Payload_Size */ -#define PCI_EXP_DEVCAP_PHANTOM 0x18 /* Phantom functions */ -#define PCI_EXP_DEVCAP_EXT_TAG 0x20 /* Extended tags */ -#define PCI_EXP_DEVCAP_L0S 0x1c0 /* L0s Acceptable Latency */ -#define PCI_EXP_DEVCAP_L1 0xe00 /* L1 Acceptable Latency */ -#define PCI_EXP_DEVCAP_ATN_BUT 0x1000 /* Attention Button Present */ -#define PCI_EXP_DEVCAP_ATN_IND 0x2000 /* Attention Indicator Present */ -#define PCI_EXP_DEVCAP_PWR_IND 0x4000 /* Power Indicator Present */ -#define PCI_EXP_DEVCAP_PWR_VAL 0x3fc0000 /* Slot Power Limit Value */ -#define PCI_EXP_DEVCAP_PWR_SCL 0xc000000 /* Slot Power Limit Scale */ -#define PCI_EXP_DEVCTL 8 /* Device Control */ -#define PCI_EXP_DEVCTL_CERE 0x0001 /* Correctable Error Reporting En. */ -#define PCI_EXP_DEVCTL_NFERE 0x0002 /* Non-Fatal Error Reporting Enable */ -#define PCI_EXP_DEVCTL_FERE 0x0004 /* Fatal Error Reporting Enable */ -#define PCI_EXP_DEVCTL_URRE 0x0008 /* Unsupported Request Reporting En. */ -#define PCI_EXP_DEVCTL_RELAX_EN 0x0010 /* Enable relaxed ordering */ -#define PCI_EXP_DEVCTL_PAYLOAD 0x00e0 /* Max_Payload_Size */ -#define PCI_EXP_DEVCTL_EXT_TAG 0x0100 /* Extended Tag Field Enable */ -#define PCI_EXP_DEVCTL_PHANTOM 0x0200 /* Phantom Functions Enable */ -#define PCI_EXP_DEVCTL_AUX_PME 0x0400 /* Auxiliary Power PM Enable */ -#define PCI_EXP_DEVCTL_NOSNOOP_EN 0x0800 /* Enable No Snoop */ -#define PCI_EXP_DEVCTL_READRQ 0x7000 /* Max_Read_Request_Size */ -#define PCI_EXP_DEVSTA 10 /* Device Status */ -#define PCI_EXP_DEVSTA_CED 0x01 /* Correctable Error Detected */ -#define PCI_EXP_DEVSTA_NFED 0x02 /* Non-Fatal Error Detected */ -#define PCI_EXP_DEVSTA_FED 0x04 /* Fatal Error Detected */ -#define PCI_EXP_DEVSTA_URD 0x08 /* Unsupported Request Detected */ -#define PCI_EXP_DEVSTA_AUXPD 0x10 /* AUX Power Detected */ -#define PCI_EXP_DEVSTA_TRPND 0x20 /* Transactions Pending */ -#define PCI_EXP_LNKCAP 12 /* Link Capabilities */ -#define PCI_EXP_LNKCTL 16 /* Link Control */ -#define PCI_EXP_LNKSTA 18 /* Link Status */ -#define PCI_EXP_SLTCAP 20 /* Slot Capabilities */ -#define PCI_EXP_SLTCTL 24 /* Slot Control */ -#define PCI_EXP_SLTSTA 26 /* Slot Status */ -#define PCI_EXP_RTCTL 28 /* Root Control */ -#define PCI_EXP_RTCTL_SECEE 0x01 /* System Error on Correctable Error */ -#define PCI_EXP_RTCTL_SENFEE 0x02 /* System Error on Non-Fatal Error */ -#define PCI_EXP_RTCTL_SEFEE 0x04 /* System Error on Fatal Error */ -#define PCI_EXP_RTCTL_PMEIE 0x08 /* PME Interrupt Enable */ -#define PCI_EXP_RTCTL_CRSSVE 0x10 /* CRS Software Visibility Enable */ -#define PCI_EXP_RTCAP 30 /* Root Capabilities */ -#define PCI_EXP_RTSTA 32 /* Root Status */ - -/* Extended Capabilities (PCI-X 2.0 and Express) */ -#define PCI_EXT_CAP_ID(header) (header & 0x0000ffff) -#define PCI_EXT_CAP_VER(header) ((header >> 16) & 0xf) -#define PCI_EXT_CAP_NEXT(header) ((header >> 20) & 0xffc) - -#define PCI_EXT_CAP_ID_ERR 1 -#define PCI_EXT_CAP_ID_VC 2 -#define PCI_EXT_CAP_ID_DSN 3 -#define PCI_EXT_CAP_ID_PWR 4 - -/* Advanced Error Reporting */ -#define PCI_ERR_UNCOR_STATUS 4 /* Uncorrectable Error Status */ -#define PCI_ERR_UNC_TRAIN 0x00000001 /* Training */ -#define PCI_ERR_UNC_DLP 0x00000010 /* Data Link Protocol */ -#define PCI_ERR_UNC_POISON_TLP 0x00001000 /* Poisoned TLP */ -#define PCI_ERR_UNC_FCP 0x00002000 /* Flow Control Protocol */ -#define PCI_ERR_UNC_COMP_TIME 0x00004000 /* Completion Timeout */ -#define PCI_ERR_UNC_COMP_ABORT 0x00008000 /* Completer Abort */ -#define PCI_ERR_UNC_UNX_COMP 0x00010000 /* Unexpected Completion */ -#define PCI_ERR_UNC_RX_OVER 0x00020000 /* Receiver Overflow */ -#define PCI_ERR_UNC_MALF_TLP 0x00040000 /* Malformed TLP */ -#define PCI_ERR_UNC_ECRC 0x00080000 /* ECRC Error Status */ -#define PCI_ERR_UNC_UNSUP 0x00100000 /* Unsupported Request */ -#define PCI_ERR_UNCOR_MASK 8 /* Uncorrectable Error Mask */ - /* Same bits as above */ -#define PCI_ERR_UNCOR_SEVER 12 /* Uncorrectable Error Severity */ - /* Same bits as above */ -#define PCI_ERR_COR_STATUS 16 /* Correctable Error Status */ -#define PCI_ERR_COR_RCVR 0x00000001 /* Receiver Error Status */ -#define PCI_ERR_COR_BAD_TLP 0x00000040 /* Bad TLP Status */ -#define PCI_ERR_COR_BAD_DLLP 0x00000080 /* Bad DLLP Status */ -#define PCI_ERR_COR_REP_ROLL 0x00000100 /* REPLAY_NUM Rollover */ -#define PCI_ERR_COR_REP_TIMER 0x00001000 /* Replay Timer Timeout */ -#define PCI_ERR_COR_MASK 20 /* Correctable Error Mask */ - /* Same bits as above */ -#define PCI_ERR_CAP 24 /* Advanced Error Capabilities */ -#define PCI_ERR_CAP_FEP(x) ((x) & 31) /* First Error Pointer */ -#define PCI_ERR_CAP_ECRC_GENC 0x00000020 /* ECRC Generation Capable */ -#define PCI_ERR_CAP_ECRC_GENE 0x00000040 /* ECRC Generation Enable */ -#define PCI_ERR_CAP_ECRC_CHKC 0x00000080 /* ECRC Check Capable */ -#define PCI_ERR_CAP_ECRC_CHKE 0x00000100 /* ECRC Check Enable */ -#define PCI_ERR_HEADER_LOG 28 /* Header Log Register (16 bytes) */ -#define PCI_ERR_ROOT_COMMAND 44 /* Root Error Command */ -#define PCI_ERR_ROOT_STATUS 48 -#define PCI_ERR_ROOT_COR_SRC 52 -#define PCI_ERR_ROOT_SRC 54 - -/* Virtual Channel */ -#define PCI_VC_PORT_REG1 4 -#define PCI_VC_PORT_REG2 8 -#define PCI_VC_PORT_CTRL 12 -#define PCI_VC_PORT_STATUS 14 -#define PCI_VC_RES_CAP 16 -#define PCI_VC_RES_CTRL 20 -#define PCI_VC_RES_STATUS 26 - -/* Power Budgeting */ -#define PCI_PWR_DSR 4 /* Data Select Register */ -#define PCI_PWR_DATA 8 /* Data Register */ -#define PCI_PWR_DATA_BASE(x) ((x) & 0xff) /* Base Power */ -#define PCI_PWR_DATA_SCALE(x) (((x) >> 8) & 3) /* Data Scale */ -#define PCI_PWR_DATA_PM_SUB(x) (((x) >> 10) & 7) /* PM Sub State */ -#define PCI_PWR_DATA_PM_STATE(x) (((x) >> 13) & 3) /* PM State */ -#define PCI_PWR_DATA_TYPE(x) (((x) >> 15) & 7) /* Type */ -#define PCI_PWR_DATA_RAIL(x) (((x) >> 18) & 7) /* Power Rail */ -#define PCI_PWR_CAP 12 /* Capability */ -#define PCI_PWR_CAP_BUDGET(x) ((x) & 1) /* Included in system budget */ +/* Include the pci register defines */ +#include <linux/pci_regs.h> /* Include the ID list */ - #include <linux/pci_ids.h> /* @@ -496,11 +70,12 @@ enum pci_mmap_state { typedef int __bitwise pci_power_t; -#define PCI_D0 ((pci_power_t __force) 0) -#define PCI_D1 ((pci_power_t __force) 1) -#define PCI_D2 ((pci_power_t __force) 2) +#define PCI_D0 ((pci_power_t __force) 0) +#define PCI_D1 ((pci_power_t __force) 1) +#define PCI_D2 ((pci_power_t __force) 2) #define PCI_D3hot ((pci_power_t __force) 3) #define PCI_D3cold ((pci_power_t __force) 4) +#define PCI_UNKNOWN ((pci_power_t __force) 5) #define PCI_POWER_ERROR ((pci_power_t __force) -1) /* @@ -562,11 +137,6 @@ struct pci_dev { struct bin_attribute *rom_attr; /* attribute descriptor for sysfs ROM entry */ int rom_attr_enabled; /* has display of the rom attribute been enabled? */ struct bin_attribute *res_attr[DEVICE_COUNT_RESOURCE]; /* sysfs file for resources */ -#ifdef CONFIG_PCI_NAMES -#define PCI_NAME_SIZE 255 -#define PCI_NAME_HALF __stringify(43) /* less than half to handle slop */ - char pretty_name[PCI_NAME_SIZE]; /* pretty name for users to see */ -#endif }; #define pci_dev_g(n) list_entry(n, struct pci_dev, global_list) @@ -582,15 +152,15 @@ struct pci_dev { * 7-10 bridges: address space assigned to buses behind the bridge */ -#define PCI_ROM_RESOURCE 6 -#define PCI_BRIDGE_RESOURCES 7 -#define PCI_NUM_RESOURCES 11 +#define PCI_ROM_RESOURCE 6 +#define PCI_BRIDGE_RESOURCES 7 +#define PCI_NUM_RESOURCES 11 #ifndef PCI_BUS_NUM_RESOURCES -#define PCI_BUS_NUM_RESOURCES 8 +#define PCI_BUS_NUM_RESOURCES 8 #endif - -#define PCI_REGION_FLAG_MASK 0x0fU /* These bits of resource flags tell us the PCI region flags */ + +#define PCI_REGION_FLAG_MASK 0x0fU /* These bits of resource flags tell us the PCI region flags */ struct pci_bus { struct list_head node; /* node in list of buses */ @@ -699,7 +269,7 @@ struct pci_driver { * @dev_class_mask: the class mask for this device * * This macro is used to create a struct pci_device_id that matches a - * specific PCI class. The vendor, device, subvendor, and subdevice + * specific PCI class. The vendor, device, subvendor, and subdevice * fields will be set to PCI_ANY_ID. */ #define PCI_DEVICE_CLASS(dev_class,dev_class_mask) \ @@ -707,7 +277,7 @@ struct pci_driver { .vendor = PCI_ANY_ID, .device = PCI_ANY_ID, \ .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID -/* +/* * pci_module_init is obsolete, this stays here till we fix up all usages of it * in the tree. */ @@ -745,12 +315,13 @@ static inline struct pci_bus *pci_scan_bus(int bus, struct pci_ops *ops, void *s pci_bus_add_devices(root_bus); return root_bus; } +struct pci_bus *pci_create_bus(struct device *parent, int bus, struct pci_ops *ops, void *sysdata); +struct pci_bus * pci_add_new_bus(struct pci_bus *parent, struct pci_dev *dev, int busnr); int pci_scan_slot(struct pci_bus *bus, int devfn); struct pci_dev * pci_scan_single_device(struct pci_bus *bus, int devfn); +void pci_device_add(struct pci_dev *dev, struct pci_bus *bus); unsigned int pci_scan_child_bus(struct pci_bus *bus); void pci_bus_add_device(struct pci_dev *dev); -void pci_name_device(struct pci_dev *dev); -char *pci_class_name(u32 class); void pci_read_bridge_bases(struct pci_bus *child); struct resource *pci_find_parent_resource(const struct pci_dev *dev, struct resource *res); int pci_get_interrupt_pin(struct pci_dev *dev, struct pci_dev **bridge); @@ -758,6 +329,7 @@ extern struct pci_dev *pci_dev_get(struct pci_dev *dev); extern void pci_dev_put(struct pci_dev *dev); extern void pci_remove_bus(struct pci_bus *b); extern void pci_remove_bus_device(struct pci_dev *dev); +void pci_setup_cardbus(struct pci_bus *bus); /* Generic PCI functions exported to card drivers */ @@ -815,13 +387,16 @@ void pci_set_master(struct pci_dev *dev); #define HAVE_PCI_SET_MWI int pci_set_mwi(struct pci_dev *dev); void pci_clear_mwi(struct pci_dev *dev); +void pci_intx(struct pci_dev *dev, int enable); int pci_set_dma_mask(struct pci_dev *dev, u64 mask); int pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask); +void pci_update_resource(struct pci_dev *dev, struct resource *res, int resno); int pci_assign_resource(struct pci_dev *dev, int i); +void pci_restore_bars(struct pci_dev *dev); /* ROM control related routines */ -void __iomem *pci_map_rom(struct pci_dev *pdev, size_t *size); -void __iomem *pci_map_rom_copy(struct pci_dev *pdev, size_t *size); +void __iomem __must_check *pci_map_rom(struct pci_dev *pdev, size_t *size); +void __iomem __must_check *pci_map_rom_copy(struct pci_dev *pdev, size_t *size); void pci_unmap_rom(struct pci_dev *pdev, void __iomem *rom); void pci_remove_rom(struct pci_dev *pdev); @@ -865,6 +440,9 @@ const struct pci_device_id *pci_match_device(struct pci_driver *drv, struct pci_ const struct pci_device_id *pci_match_id(const struct pci_device_id *ids, struct pci_dev *dev); int pci_scan_bridge(struct pci_bus *bus, struct pci_dev * dev, int max, int pass); +void pci_walk_bus(struct pci_bus *top, void (*cb)(struct pci_dev *, void *), + void *userdata); + /* kmem_cache style wrapper around pci_alloc_consistent() */ #include <linux/dmapool.h> @@ -912,18 +490,26 @@ extern void pci_disable_msix(struct pci_dev *dev); extern void msi_remove_pci_irq_vectors(struct pci_dev *dev); #endif -#endif /* CONFIG_PCI */ - -/* Include architecture-dependent settings and functions */ +/* + * PCI domain support. Sometimes called PCI segment (eg by ACPI), + * a PCI domain is defined to be a set of PCI busses which share + * configuration space. + */ +#ifndef CONFIG_PCI_DOMAINS +static inline int pci_domain_nr(struct pci_bus *bus) { return 0; } +static inline int pci_proc_domain(struct pci_bus *bus) +{ + return 0; +} +#endif -#include <asm/pci.h> +#else /* CONFIG_PCI is not enabled */ /* * If the system does not have PCI, clearly these return errors. Define * these as simple inline functions to avoid hair in drivers. */ -#ifndef CONFIG_PCI #define _PCI_NOP(o,s,t) \ static inline int pci_##o##_config_##s (struct pci_dev *dev, int where, t val) \ { return PCIBIOS_FUNC_NOT_SUPPORTED; } @@ -974,21 +560,11 @@ static inline int pci_enable_wake(struct pci_dev *dev, pci_power_t state, int en #define pci_dma_burst_advice(pdev, strat, strategy_parameter) do { } while (0) -#else +#endif /* CONFIG_PCI */ -/* - * PCI domain support. Sometimes called PCI segment (eg by ACPI), - * a PCI domain is defined to be a set of PCI busses which share - * configuration space. - */ -#ifndef CONFIG_PCI_DOMAINS -static inline int pci_domain_nr(struct pci_bus *bus) { return 0; } -static inline int pci_proc_domain(struct pci_bus *bus) -{ - return 0; -} -#endif -#endif /* !CONFIG_PCI */ +/* Include architecture-dependent settings and functions */ + +#include <asm/pci.h> /* these helpers provide future and backwards compatibility * for accessing popular PCI BAR info */ @@ -1025,13 +601,6 @@ static inline char *pci_name(struct pci_dev *pdev) return pdev->dev.bus_id; } -/* Some archs want to see the pretty pci name, so use this macro */ -#ifdef CONFIG_PCI_NAMES -#define pci_pretty_name(dev) ((dev)->pretty_name) -#else -#define pci_pretty_name(dev) "" -#endif - /* Some archs don't want to expose struct resource to userland as-is * in sysfs and /proc @@ -1067,7 +636,7 @@ enum pci_fixup_pass { /* Anonymous variables would be nice... */ #define DECLARE_PCI_FIXUP_SECTION(section, name, vendor, device, hook) \ - static struct pci_fixup __pci_fixup_##name __attribute_used__ \ + static const struct pci_fixup __pci_fixup_##name __attribute_used__ \ __attribute__((__section__(#section))) = { vendor, device, hook }; #define DECLARE_PCI_FIXUP_EARLY(vendor, device, hook) \ DECLARE_PCI_FIXUP_SECTION(.pci_fixup_early, \ diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index d513c1634006..ee0ab7a5f91b 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -1612,6 +1612,7 @@ #define PCI_DEVICE_ID_TOSHIBA_TC35815CF 0x0030 #define PCI_DEVICE_ID_TOSHIBA_TX4927 0x0180 #define PCI_DEVICE_ID_TOSHIBA_TC86C001_MISC 0x0108 +#define PCI_DEVICE_ID_TOSHIBA_SPIDER_NET 0x01b3 #define PCI_VENDOR_ID_RICOH 0x1180 #define PCI_DEVICE_ID_RICOH_RL5C465 0x0465 @@ -2147,6 +2148,9 @@ #define PCI_DEVICE_ID_ENE_1420 0x1420 #define PCI_VENDOR_ID_CHELSIO 0x1425 +#define PCI_VENDOR_ID_MIPS 0x153f +#define PCI_DEVICE_ID_SOC_IT 0x0001 + #define PCI_VENDOR_ID_SYBA 0x1592 #define PCI_DEVICE_ID_SYBA_2P_EPP 0x0782 #define PCI_DEVICE_ID_SYBA_1P_ECP 0x0783 diff --git a/include/linux/pci_regs.h b/include/linux/pci_regs.h new file mode 100644 index 000000000000..e2a089b051ed --- /dev/null +++ b/include/linux/pci_regs.h @@ -0,0 +1,448 @@ +/* + * pci_regs.h + * + * PCI standard defines + * Copyright 1994, Drew Eckhardt + * Copyright 1997--1999 Martin Mares <mj@ucw.cz> + * + * For more information, please consult the following manuals (look at + * http://www.pcisig.com/ for how to get them): + * + * PCI BIOS Specification + * PCI Local Bus Specification + * PCI to PCI Bridge Specification + * PCI System Design Guide + */ + +#ifndef LINUX_PCI_REGS_H +#define LINUX_PCI_REGS_H + +/* + * Under PCI, each device has 256 bytes of configuration address space, + * of which the first 64 bytes are standardized as follows: + */ +#define PCI_VENDOR_ID 0x00 /* 16 bits */ +#define PCI_DEVICE_ID 0x02 /* 16 bits */ +#define PCI_COMMAND 0x04 /* 16 bits */ +#define PCI_COMMAND_IO 0x1 /* Enable response in I/O space */ +#define PCI_COMMAND_MEMORY 0x2 /* Enable response in Memory space */ +#define PCI_COMMAND_MASTER 0x4 /* Enable bus mastering */ +#define PCI_COMMAND_SPECIAL 0x8 /* Enable response to special cycles */ +#define PCI_COMMAND_INVALIDATE 0x10 /* Use memory write and invalidate */ +#define PCI_COMMAND_VGA_PALETTE 0x20 /* Enable palette snooping */ +#define PCI_COMMAND_PARITY 0x40 /* Enable parity checking */ +#define PCI_COMMAND_WAIT 0x80 /* Enable address/data stepping */ +#define PCI_COMMAND_SERR 0x100 /* Enable SERR */ +#define PCI_COMMAND_FAST_BACK 0x200 /* Enable back-to-back writes */ +#define PCI_COMMAND_INTX_DISABLE 0x400 /* INTx Emulation Disable */ + +#define PCI_STATUS 0x06 /* 16 bits */ +#define PCI_STATUS_CAP_LIST 0x10 /* Support Capability List */ +#define PCI_STATUS_66MHZ 0x20 /* Support 66 Mhz PCI 2.1 bus */ +#define PCI_STATUS_UDF 0x40 /* Support User Definable Features [obsolete] */ +#define PCI_STATUS_FAST_BACK 0x80 /* Accept fast-back to back */ +#define PCI_STATUS_PARITY 0x100 /* Detected parity error */ +#define PCI_STATUS_DEVSEL_MASK 0x600 /* DEVSEL timing */ +#define PCI_STATUS_DEVSEL_FAST 0x000 +#define PCI_STATUS_DEVSEL_MEDIUM 0x200 +#define PCI_STATUS_DEVSEL_SLOW 0x400 +#define PCI_STATUS_SIG_TARGET_ABORT 0x800 /* Set on target abort */ +#define PCI_STATUS_REC_TARGET_ABORT 0x1000 /* Master ack of " */ +#define PCI_STATUS_REC_MASTER_ABORT 0x2000 /* Set on master abort */ +#define PCI_STATUS_SIG_SYSTEM_ERROR 0x4000 /* Set when we drive SERR */ +#define PCI_STATUS_DETECTED_PARITY 0x8000 /* Set on parity error */ + +#define PCI_CLASS_REVISION 0x08 /* High 24 bits are class, low 8 revision */ +#define PCI_REVISION_ID 0x08 /* Revision ID */ +#define PCI_CLASS_PROG 0x09 /* Reg. Level Programming Interface */ +#define PCI_CLASS_DEVICE 0x0a /* Device class */ + +#define PCI_CACHE_LINE_SIZE 0x0c /* 8 bits */ +#define PCI_LATENCY_TIMER 0x0d /* 8 bits */ +#define PCI_HEADER_TYPE 0x0e /* 8 bits */ +#define PCI_HEADER_TYPE_NORMAL 0 +#define PCI_HEADER_TYPE_BRIDGE 1 +#define PCI_HEADER_TYPE_CARDBUS 2 + +#define PCI_BIST 0x0f /* 8 bits */ +#define PCI_BIST_CODE_MASK 0x0f /* Return result */ +#define PCI_BIST_START 0x40 /* 1 to start BIST, 2 secs or less */ +#define PCI_BIST_CAPABLE 0x80 /* 1 if BIST capable */ + +/* + * Base addresses specify locations in memory or I/O space. + * Decoded size can be determined by writing a value of + * 0xffffffff to the register, and reading it back. Only + * 1 bits are decoded. + */ +#define PCI_BASE_ADDRESS_0 0x10 /* 32 bits */ +#define PCI_BASE_ADDRESS_1 0x14 /* 32 bits [htype 0,1 only] */ +#define PCI_BASE_ADDRESS_2 0x18 /* 32 bits [htype 0 only] */ +#define PCI_BASE_ADDRESS_3 0x1c /* 32 bits */ +#define PCI_BASE_ADDRESS_4 0x20 /* 32 bits */ +#define PCI_BASE_ADDRESS_5 0x24 /* 32 bits */ +#define PCI_BASE_ADDRESS_SPACE 0x01 /* 0 = memory, 1 = I/O */ +#define PCI_BASE_ADDRESS_SPACE_IO 0x01 +#define PCI_BASE_ADDRESS_SPACE_MEMORY 0x00 +#define PCI_BASE_ADDRESS_MEM_TYPE_MASK 0x06 +#define PCI_BASE_ADDRESS_MEM_TYPE_32 0x00 /* 32 bit address */ +#define PCI_BASE_ADDRESS_MEM_TYPE_1M 0x02 /* Below 1M [obsolete] */ +#define PCI_BASE_ADDRESS_MEM_TYPE_64 0x04 /* 64 bit address */ +#define PCI_BASE_ADDRESS_MEM_PREFETCH 0x08 /* prefetchable? */ +#define PCI_BASE_ADDRESS_MEM_MASK (~0x0fUL) +#define PCI_BASE_ADDRESS_IO_MASK (~0x03UL) +/* bit 1 is reserved if address_space = 1 */ + +/* Header type 0 (normal devices) */ +#define PCI_CARDBUS_CIS 0x28 +#define PCI_SUBSYSTEM_VENDOR_ID 0x2c +#define PCI_SUBSYSTEM_ID 0x2e +#define PCI_ROM_ADDRESS 0x30 /* Bits 31..11 are address, 10..1 reserved */ +#define PCI_ROM_ADDRESS_ENABLE 0x01 +#define PCI_ROM_ADDRESS_MASK (~0x7ffUL) + +#define PCI_CAPABILITY_LIST 0x34 /* Offset of first capability list entry */ + +/* 0x35-0x3b are reserved */ +#define PCI_INTERRUPT_LINE 0x3c /* 8 bits */ +#define PCI_INTERRUPT_PIN 0x3d /* 8 bits */ +#define PCI_MIN_GNT 0x3e /* 8 bits */ +#define PCI_MAX_LAT 0x3f /* 8 bits */ + +/* Header type 1 (PCI-to-PCI bridges) */ +#define PCI_PRIMARY_BUS 0x18 /* Primary bus number */ +#define PCI_SECONDARY_BUS 0x19 /* Secondary bus number */ +#define PCI_SUBORDINATE_BUS 0x1a /* Highest bus number behind the bridge */ +#define PCI_SEC_LATENCY_TIMER 0x1b /* Latency timer for secondary interface */ +#define PCI_IO_BASE 0x1c /* I/O range behind the bridge */ +#define PCI_IO_LIMIT 0x1d +#define PCI_IO_RANGE_TYPE_MASK 0x0fUL /* I/O bridging type */ +#define PCI_IO_RANGE_TYPE_16 0x00 +#define PCI_IO_RANGE_TYPE_32 0x01 +#define PCI_IO_RANGE_MASK (~0x0fUL) +#define PCI_SEC_STATUS 0x1e /* Secondary status register, only bit 14 used */ +#define PCI_MEMORY_BASE 0x20 /* Memory range behind */ +#define PCI_MEMORY_LIMIT 0x22 +#define PCI_MEMORY_RANGE_TYPE_MASK 0x0fUL +#define PCI_MEMORY_RANGE_MASK (~0x0fUL) +#define PCI_PREF_MEMORY_BASE 0x24 /* Prefetchable memory range behind */ +#define PCI_PREF_MEMORY_LIMIT 0x26 +#define PCI_PREF_RANGE_TYPE_MASK 0x0fUL +#define PCI_PREF_RANGE_TYPE_32 0x00 +#define PCI_PREF_RANGE_TYPE_64 0x01 +#define PCI_PREF_RANGE_MASK (~0x0fUL) +#define PCI_PREF_BASE_UPPER32 0x28 /* Upper half of prefetchable memory range */ +#define PCI_PREF_LIMIT_UPPER32 0x2c +#define PCI_IO_BASE_UPPER16 0x30 /* Upper half of I/O addresses */ +#define PCI_IO_LIMIT_UPPER16 0x32 +/* 0x34 same as for htype 0 */ +/* 0x35-0x3b is reserved */ +#define PCI_ROM_ADDRESS1 0x38 /* Same as PCI_ROM_ADDRESS, but for htype 1 */ +/* 0x3c-0x3d are same as for htype 0 */ +#define PCI_BRIDGE_CONTROL 0x3e +#define PCI_BRIDGE_CTL_PARITY 0x01 /* Enable parity detection on secondary interface */ +#define PCI_BRIDGE_CTL_SERR 0x02 /* The same for SERR forwarding */ +#define PCI_BRIDGE_CTL_NO_ISA 0x04 /* Disable bridging of ISA ports */ +#define PCI_BRIDGE_CTL_VGA 0x08 /* Forward VGA addresses */ +#define PCI_BRIDGE_CTL_MASTER_ABORT 0x20 /* Report master aborts */ +#define PCI_BRIDGE_CTL_BUS_RESET 0x40 /* Secondary bus reset */ +#define PCI_BRIDGE_CTL_FAST_BACK 0x80 /* Fast Back2Back enabled on secondary interface */ + +/* Header type 2 (CardBus bridges) */ +#define PCI_CB_CAPABILITY_LIST 0x14 +/* 0x15 reserved */ +#define PCI_CB_SEC_STATUS 0x16 /* Secondary status */ +#define PCI_CB_PRIMARY_BUS 0x18 /* PCI bus number */ +#define PCI_CB_CARD_BUS 0x19 /* CardBus bus number */ +#define PCI_CB_SUBORDINATE_BUS 0x1a /* Subordinate bus number */ +#define PCI_CB_LATENCY_TIMER 0x1b /* CardBus latency timer */ +#define PCI_CB_MEMORY_BASE_0 0x1c +#define PCI_CB_MEMORY_LIMIT_0 0x20 +#define PCI_CB_MEMORY_BASE_1 0x24 +#define PCI_CB_MEMORY_LIMIT_1 0x28 +#define PCI_CB_IO_BASE_0 0x2c +#define PCI_CB_IO_BASE_0_HI 0x2e +#define PCI_CB_IO_LIMIT_0 0x30 +#define PCI_CB_IO_LIMIT_0_HI 0x32 +#define PCI_CB_IO_BASE_1 0x34 +#define PCI_CB_IO_BASE_1_HI 0x36 +#define PCI_CB_IO_LIMIT_1 0x38 +#define PCI_CB_IO_LIMIT_1_HI 0x3a +#define PCI_CB_IO_RANGE_MASK (~0x03UL) +/* 0x3c-0x3d are same as for htype 0 */ +#define PCI_CB_BRIDGE_CONTROL 0x3e +#define PCI_CB_BRIDGE_CTL_PARITY 0x01 /* Similar to standard bridge control register */ +#define PCI_CB_BRIDGE_CTL_SERR 0x02 +#define PCI_CB_BRIDGE_CTL_ISA 0x04 +#define PCI_CB_BRIDGE_CTL_VGA 0x08 +#define PCI_CB_BRIDGE_CTL_MASTER_ABORT 0x20 +#define PCI_CB_BRIDGE_CTL_CB_RESET 0x40 /* CardBus reset */ +#define PCI_CB_BRIDGE_CTL_16BIT_INT 0x80 /* Enable interrupt for 16-bit cards */ +#define PCI_CB_BRIDGE_CTL_PREFETCH_MEM0 0x100 /* Prefetch enable for both memory regions */ +#define PCI_CB_BRIDGE_CTL_PREFETCH_MEM1 0x200 +#define PCI_CB_BRIDGE_CTL_POST_WRITES 0x400 +#define PCI_CB_SUBSYSTEM_VENDOR_ID 0x40 +#define PCI_CB_SUBSYSTEM_ID 0x42 +#define PCI_CB_LEGACY_MODE_BASE 0x44 /* 16-bit PC Card legacy mode base address (ExCa) */ +/* 0x48-0x7f reserved */ + +/* Capability lists */ + +#define PCI_CAP_LIST_ID 0 /* Capability ID */ +#define PCI_CAP_ID_PM 0x01 /* Power Management */ +#define PCI_CAP_ID_AGP 0x02 /* Accelerated Graphics Port */ +#define PCI_CAP_ID_VPD 0x03 /* Vital Product Data */ +#define PCI_CAP_ID_SLOTID 0x04 /* Slot Identification */ +#define PCI_CAP_ID_MSI 0x05 /* Message Signalled Interrupts */ +#define PCI_CAP_ID_CHSWP 0x06 /* CompactPCI HotSwap */ +#define PCI_CAP_ID_PCIX 0x07 /* PCI-X */ +#define PCI_CAP_ID_SHPC 0x0C /* PCI Standard Hot-Plug Controller */ +#define PCI_CAP_ID_EXP 0x10 /* PCI Express */ +#define PCI_CAP_ID_MSIX 0x11 /* MSI-X */ +#define PCI_CAP_LIST_NEXT 1 /* Next capability in the list */ +#define PCI_CAP_FLAGS 2 /* Capability defined flags (16 bits) */ +#define PCI_CAP_SIZEOF 4 + +/* Power Management Registers */ + +#define PCI_PM_PMC 2 /* PM Capabilities Register */ +#define PCI_PM_CAP_VER_MASK 0x0007 /* Version */ +#define PCI_PM_CAP_PME_CLOCK 0x0008 /* PME clock required */ +#define PCI_PM_CAP_RESERVED 0x0010 /* Reserved field */ +#define PCI_PM_CAP_DSI 0x0020 /* Device specific initialization */ +#define PCI_PM_CAP_AUX_POWER 0x01C0 /* Auxilliary power support mask */ +#define PCI_PM_CAP_D1 0x0200 /* D1 power state support */ +#define PCI_PM_CAP_D2 0x0400 /* D2 power state support */ +#define PCI_PM_CAP_PME 0x0800 /* PME pin supported */ +#define PCI_PM_CAP_PME_MASK 0xF800 /* PME Mask of all supported states */ +#define PCI_PM_CAP_PME_D0 0x0800 /* PME# from D0 */ +#define PCI_PM_CAP_PME_D1 0x1000 /* PME# from D1 */ +#define PCI_PM_CAP_PME_D2 0x2000 /* PME# from D2 */ +#define PCI_PM_CAP_PME_D3 0x4000 /* PME# from D3 (hot) */ +#define PCI_PM_CAP_PME_D3cold 0x8000 /* PME# from D3 (cold) */ +#define PCI_PM_CTRL 4 /* PM control and status register */ +#define PCI_PM_CTRL_STATE_MASK 0x0003 /* Current power state (D0 to D3) */ +#define PCI_PM_CTRL_NO_SOFT_RESET 0x0004 /* No reset for D3hot->D0 */ +#define PCI_PM_CTRL_PME_ENABLE 0x0100 /* PME pin enable */ +#define PCI_PM_CTRL_DATA_SEL_MASK 0x1e00 /* Data select (??) */ +#define PCI_PM_CTRL_DATA_SCALE_MASK 0x6000 /* Data scale (??) */ +#define PCI_PM_CTRL_PME_STATUS 0x8000 /* PME pin status */ +#define PCI_PM_PPB_EXTENSIONS 6 /* PPB support extensions (??) */ +#define PCI_PM_PPB_B2_B3 0x40 /* Stop clock when in D3hot (??) */ +#define PCI_PM_BPCC_ENABLE 0x80 /* Bus power/clock control enable (??) */ +#define PCI_PM_DATA_REGISTER 7 /* (??) */ +#define PCI_PM_SIZEOF 8 + +/* AGP registers */ + +#define PCI_AGP_VERSION 2 /* BCD version number */ +#define PCI_AGP_RFU 3 /* Rest of capability flags */ +#define PCI_AGP_STATUS 4 /* Status register */ +#define PCI_AGP_STATUS_RQ_MASK 0xff000000 /* Maximum number of requests - 1 */ +#define PCI_AGP_STATUS_SBA 0x0200 /* Sideband addressing supported */ +#define PCI_AGP_STATUS_64BIT 0x0020 /* 64-bit addressing supported */ +#define PCI_AGP_STATUS_FW 0x0010 /* FW transfers supported */ +#define PCI_AGP_STATUS_RATE4 0x0004 /* 4x transfer rate supported */ +#define PCI_AGP_STATUS_RATE2 0x0002 /* 2x transfer rate supported */ +#define PCI_AGP_STATUS_RATE1 0x0001 /* 1x transfer rate supported */ +#define PCI_AGP_COMMAND 8 /* Control register */ +#define PCI_AGP_COMMAND_RQ_MASK 0xff000000 /* Master: Maximum number of requests */ +#define PCI_AGP_COMMAND_SBA 0x0200 /* Sideband addressing enabled */ +#define PCI_AGP_COMMAND_AGP 0x0100 /* Allow processing of AGP transactions */ +#define PCI_AGP_COMMAND_64BIT 0x0020 /* Allow processing of 64-bit addresses */ +#define PCI_AGP_COMMAND_FW 0x0010 /* Force FW transfers */ +#define PCI_AGP_COMMAND_RATE4 0x0004 /* Use 4x rate */ +#define PCI_AGP_COMMAND_RATE2 0x0002 /* Use 2x rate */ +#define PCI_AGP_COMMAND_RATE1 0x0001 /* Use 1x rate */ +#define PCI_AGP_SIZEOF 12 + +/* Vital Product Data */ + +#define PCI_VPD_ADDR 2 /* Address to access (15 bits!) */ +#define PCI_VPD_ADDR_MASK 0x7fff /* Address mask */ +#define PCI_VPD_ADDR_F 0x8000 /* Write 0, 1 indicates completion */ +#define PCI_VPD_DATA 4 /* 32-bits of data returned here */ + +/* Slot Identification */ + +#define PCI_SID_ESR 2 /* Expansion Slot Register */ +#define PCI_SID_ESR_NSLOTS 0x1f /* Number of expansion slots available */ +#define PCI_SID_ESR_FIC 0x20 /* First In Chassis Flag */ +#define PCI_SID_CHASSIS_NR 3 /* Chassis Number */ + +/* Message Signalled Interrupts registers */ + +#define PCI_MSI_FLAGS 2 /* Various flags */ +#define PCI_MSI_FLAGS_64BIT 0x80 /* 64-bit addresses allowed */ +#define PCI_MSI_FLAGS_QSIZE 0x70 /* Message queue size configured */ +#define PCI_MSI_FLAGS_QMASK 0x0e /* Maximum queue size available */ +#define PCI_MSI_FLAGS_ENABLE 0x01 /* MSI feature enabled */ +#define PCI_MSI_FLAGS_MASKBIT 0x100 /* 64-bit mask bits allowed */ +#define PCI_MSI_RFU 3 /* Rest of capability flags */ +#define PCI_MSI_ADDRESS_LO 4 /* Lower 32 bits */ +#define PCI_MSI_ADDRESS_HI 8 /* Upper 32 bits (if PCI_MSI_FLAGS_64BIT set) */ +#define PCI_MSI_DATA_32 8 /* 16 bits of data for 32-bit devices */ +#define PCI_MSI_DATA_64 12 /* 16 bits of data for 64-bit devices */ +#define PCI_MSI_MASK_BIT 16 /* Mask bits register */ + +/* CompactPCI Hotswap Register */ + +#define PCI_CHSWP_CSR 2 /* Control and Status Register */ +#define PCI_CHSWP_DHA 0x01 /* Device Hiding Arm */ +#define PCI_CHSWP_EIM 0x02 /* ENUM# Signal Mask */ +#define PCI_CHSWP_PIE 0x04 /* Pending Insert or Extract */ +#define PCI_CHSWP_LOO 0x08 /* LED On / Off */ +#define PCI_CHSWP_PI 0x30 /* Programming Interface */ +#define PCI_CHSWP_EXT 0x40 /* ENUM# status - extraction */ +#define PCI_CHSWP_INS 0x80 /* ENUM# status - insertion */ + +/* PCI-X registers */ + +#define PCI_X_CMD 2 /* Modes & Features */ +#define PCI_X_CMD_DPERR_E 0x0001 /* Data Parity Error Recovery Enable */ +#define PCI_X_CMD_ERO 0x0002 /* Enable Relaxed Ordering */ +#define PCI_X_CMD_MAX_READ 0x000c /* Max Memory Read Byte Count */ +#define PCI_X_CMD_MAX_SPLIT 0x0070 /* Max Outstanding Split Transactions */ +#define PCI_X_CMD_VERSION(x) (((x) >> 12) & 3) /* Version */ +#define PCI_X_STATUS 4 /* PCI-X capabilities */ +#define PCI_X_STATUS_DEVFN 0x000000ff /* A copy of devfn */ +#define PCI_X_STATUS_BUS 0x0000ff00 /* A copy of bus nr */ +#define PCI_X_STATUS_64BIT 0x00010000 /* 64-bit device */ +#define PCI_X_STATUS_133MHZ 0x00020000 /* 133 MHz capable */ +#define PCI_X_STATUS_SPL_DISC 0x00040000 /* Split Completion Discarded */ +#define PCI_X_STATUS_UNX_SPL 0x00080000 /* Unexpected Split Completion */ +#define PCI_X_STATUS_COMPLEX 0x00100000 /* Device Complexity */ +#define PCI_X_STATUS_MAX_READ 0x00600000 /* Designed Max Memory Read Count */ +#define PCI_X_STATUS_MAX_SPLIT 0x03800000 /* Designed Max Outstanding Split Transactions */ +#define PCI_X_STATUS_MAX_CUM 0x1c000000 /* Designed Max Cumulative Read Size */ +#define PCI_X_STATUS_SPL_ERR 0x20000000 /* Rcvd Split Completion Error Msg */ +#define PCI_X_STATUS_266MHZ 0x40000000 /* 266 MHz capable */ +#define PCI_X_STATUS_533MHZ 0x80000000 /* 533 MHz capable */ + +/* PCI Express capability registers */ + +#define PCI_EXP_FLAGS 2 /* Capabilities register */ +#define PCI_EXP_FLAGS_VERS 0x000f /* Capability version */ +#define PCI_EXP_FLAGS_TYPE 0x00f0 /* Device/Port type */ +#define PCI_EXP_TYPE_ENDPOINT 0x0 /* Express Endpoint */ +#define PCI_EXP_TYPE_LEG_END 0x1 /* Legacy Endpoint */ +#define PCI_EXP_TYPE_ROOT_PORT 0x4 /* Root Port */ +#define PCI_EXP_TYPE_UPSTREAM 0x5 /* Upstream Port */ +#define PCI_EXP_TYPE_DOWNSTREAM 0x6 /* Downstream Port */ +#define PCI_EXP_TYPE_PCI_BRIDGE 0x7 /* PCI/PCI-X Bridge */ +#define PCI_EXP_FLAGS_SLOT 0x0100 /* Slot implemented */ +#define PCI_EXP_FLAGS_IRQ 0x3e00 /* Interrupt message number */ +#define PCI_EXP_DEVCAP 4 /* Device capabilities */ +#define PCI_EXP_DEVCAP_PAYLOAD 0x07 /* Max_Payload_Size */ +#define PCI_EXP_DEVCAP_PHANTOM 0x18 /* Phantom functions */ +#define PCI_EXP_DEVCAP_EXT_TAG 0x20 /* Extended tags */ +#define PCI_EXP_DEVCAP_L0S 0x1c0 /* L0s Acceptable Latency */ +#define PCI_EXP_DEVCAP_L1 0xe00 /* L1 Acceptable Latency */ +#define PCI_EXP_DEVCAP_ATN_BUT 0x1000 /* Attention Button Present */ +#define PCI_EXP_DEVCAP_ATN_IND 0x2000 /* Attention Indicator Present */ +#define PCI_EXP_DEVCAP_PWR_IND 0x4000 /* Power Indicator Present */ +#define PCI_EXP_DEVCAP_PWR_VAL 0x3fc0000 /* Slot Power Limit Value */ +#define PCI_EXP_DEVCAP_PWR_SCL 0xc000000 /* Slot Power Limit Scale */ +#define PCI_EXP_DEVCTL 8 /* Device Control */ +#define PCI_EXP_DEVCTL_CERE 0x0001 /* Correctable Error Reporting En. */ +#define PCI_EXP_DEVCTL_NFERE 0x0002 /* Non-Fatal Error Reporting Enable */ +#define PCI_EXP_DEVCTL_FERE 0x0004 /* Fatal Error Reporting Enable */ +#define PCI_EXP_DEVCTL_URRE 0x0008 /* Unsupported Request Reporting En. */ +#define PCI_EXP_DEVCTL_RELAX_EN 0x0010 /* Enable relaxed ordering */ +#define PCI_EXP_DEVCTL_PAYLOAD 0x00e0 /* Max_Payload_Size */ +#define PCI_EXP_DEVCTL_EXT_TAG 0x0100 /* Extended Tag Field Enable */ +#define PCI_EXP_DEVCTL_PHANTOM 0x0200 /* Phantom Functions Enable */ +#define PCI_EXP_DEVCTL_AUX_PME 0x0400 /* Auxiliary Power PM Enable */ +#define PCI_EXP_DEVCTL_NOSNOOP_EN 0x0800 /* Enable No Snoop */ +#define PCI_EXP_DEVCTL_READRQ 0x7000 /* Max_Read_Request_Size */ +#define PCI_EXP_DEVSTA 10 /* Device Status */ +#define PCI_EXP_DEVSTA_CED 0x01 /* Correctable Error Detected */ +#define PCI_EXP_DEVSTA_NFED 0x02 /* Non-Fatal Error Detected */ +#define PCI_EXP_DEVSTA_FED 0x04 /* Fatal Error Detected */ +#define PCI_EXP_DEVSTA_URD 0x08 /* Unsupported Request Detected */ +#define PCI_EXP_DEVSTA_AUXPD 0x10 /* AUX Power Detected */ +#define PCI_EXP_DEVSTA_TRPND 0x20 /* Transactions Pending */ +#define PCI_EXP_LNKCAP 12 /* Link Capabilities */ +#define PCI_EXP_LNKCTL 16 /* Link Control */ +#define PCI_EXP_LNKSTA 18 /* Link Status */ +#define PCI_EXP_SLTCAP 20 /* Slot Capabilities */ +#define PCI_EXP_SLTCTL 24 /* Slot Control */ +#define PCI_EXP_SLTSTA 26 /* Slot Status */ +#define PCI_EXP_RTCTL 28 /* Root Control */ +#define PCI_EXP_RTCTL_SECEE 0x01 /* System Error on Correctable Error */ +#define PCI_EXP_RTCTL_SENFEE 0x02 /* System Error on Non-Fatal Error */ +#define PCI_EXP_RTCTL_SEFEE 0x04 /* System Error on Fatal Error */ +#define PCI_EXP_RTCTL_PMEIE 0x08 /* PME Interrupt Enable */ +#define PCI_EXP_RTCTL_CRSSVE 0x10 /* CRS Software Visibility Enable */ +#define PCI_EXP_RTCAP 30 /* Root Capabilities */ +#define PCI_EXP_RTSTA 32 /* Root Status */ + +/* Extended Capabilities (PCI-X 2.0 and Express) */ +#define PCI_EXT_CAP_ID(header) (header & 0x0000ffff) +#define PCI_EXT_CAP_VER(header) ((header >> 16) & 0xf) +#define PCI_EXT_CAP_NEXT(header) ((header >> 20) & 0xffc) + +#define PCI_EXT_CAP_ID_ERR 1 +#define PCI_EXT_CAP_ID_VC 2 +#define PCI_EXT_CAP_ID_DSN 3 +#define PCI_EXT_CAP_ID_PWR 4 + +/* Advanced Error Reporting */ +#define PCI_ERR_UNCOR_STATUS 4 /* Uncorrectable Error Status */ +#define PCI_ERR_UNC_TRAIN 0x00000001 /* Training */ +#define PCI_ERR_UNC_DLP 0x00000010 /* Data Link Protocol */ +#define PCI_ERR_UNC_POISON_TLP 0x00001000 /* Poisoned TLP */ +#define PCI_ERR_UNC_FCP 0x00002000 /* Flow Control Protocol */ +#define PCI_ERR_UNC_COMP_TIME 0x00004000 /* Completion Timeout */ +#define PCI_ERR_UNC_COMP_ABORT 0x00008000 /* Completer Abort */ +#define PCI_ERR_UNC_UNX_COMP 0x00010000 /* Unexpected Completion */ +#define PCI_ERR_UNC_RX_OVER 0x00020000 /* Receiver Overflow */ +#define PCI_ERR_UNC_MALF_TLP 0x00040000 /* Malformed TLP */ +#define PCI_ERR_UNC_ECRC 0x00080000 /* ECRC Error Status */ +#define PCI_ERR_UNC_UNSUP 0x00100000 /* Unsupported Request */ +#define PCI_ERR_UNCOR_MASK 8 /* Uncorrectable Error Mask */ + /* Same bits as above */ +#define PCI_ERR_UNCOR_SEVER 12 /* Uncorrectable Error Severity */ + /* Same bits as above */ +#define PCI_ERR_COR_STATUS 16 /* Correctable Error Status */ +#define PCI_ERR_COR_RCVR 0x00000001 /* Receiver Error Status */ +#define PCI_ERR_COR_BAD_TLP 0x00000040 /* Bad TLP Status */ +#define PCI_ERR_COR_BAD_DLLP 0x00000080 /* Bad DLLP Status */ +#define PCI_ERR_COR_REP_ROLL 0x00000100 /* REPLAY_NUM Rollover */ +#define PCI_ERR_COR_REP_TIMER 0x00001000 /* Replay Timer Timeout */ +#define PCI_ERR_COR_MASK 20 /* Correctable Error Mask */ + /* Same bits as above */ +#define PCI_ERR_CAP 24 /* Advanced Error Capabilities */ +#define PCI_ERR_CAP_FEP(x) ((x) & 31) /* First Error Pointer */ +#define PCI_ERR_CAP_ECRC_GENC 0x00000020 /* ECRC Generation Capable */ +#define PCI_ERR_CAP_ECRC_GENE 0x00000040 /* ECRC Generation Enable */ +#define PCI_ERR_CAP_ECRC_CHKC 0x00000080 /* ECRC Check Capable */ +#define PCI_ERR_CAP_ECRC_CHKE 0x00000100 /* ECRC Check Enable */ +#define PCI_ERR_HEADER_LOG 28 /* Header Log Register (16 bytes) */ +#define PCI_ERR_ROOT_COMMAND 44 /* Root Error Command */ +#define PCI_ERR_ROOT_STATUS 48 +#define PCI_ERR_ROOT_COR_SRC 52 +#define PCI_ERR_ROOT_SRC 54 + +/* Virtual Channel */ +#define PCI_VC_PORT_REG1 4 +#define PCI_VC_PORT_REG2 8 +#define PCI_VC_PORT_CTRL 12 +#define PCI_VC_PORT_STATUS 14 +#define PCI_VC_RES_CAP 16 +#define PCI_VC_RES_CTRL 20 +#define PCI_VC_RES_STATUS 26 + +/* Power Budgeting */ +#define PCI_PWR_DSR 4 /* Data Select Register */ +#define PCI_PWR_DATA 8 /* Data Register */ +#define PCI_PWR_DATA_BASE(x) ((x) & 0xff) /* Base Power */ +#define PCI_PWR_DATA_SCALE(x) (((x) >> 8) & 3) /* Data Scale */ +#define PCI_PWR_DATA_PM_SUB(x) (((x) >> 10) & 7) /* PM Sub State */ +#define PCI_PWR_DATA_PM_STATE(x) (((x) >> 13) & 3) /* PM State */ +#define PCI_PWR_DATA_TYPE(x) (((x) >> 15) & 7) /* Type */ +#define PCI_PWR_DATA_RAIL(x) (((x) >> 18) & 7) /* Power Rail */ +#define PCI_PWR_CAP 12 /* Capability */ +#define PCI_PWR_CAP_BUDGET(x) ((x) & 1) /* Included in system budget */ + +#endif /* LINUX_PCI_REGS_H */ diff --git a/include/linux/pipe_fs_i.h b/include/linux/pipe_fs_i.h index 36725e7c02c6..1767073df26f 100644 --- a/include/linux/pipe_fs_i.h +++ b/include/linux/pipe_fs_i.h @@ -39,9 +39,6 @@ struct pipe_inode_info { #define PIPE_SEM(inode) (&(inode).i_sem) #define PIPE_WAIT(inode) (&(inode).i_pipe->wait) -#define PIPE_BASE(inode) ((inode).i_pipe->base) -#define PIPE_START(inode) ((inode).i_pipe->start) -#define PIPE_LEN(inode) ((inode).i_pipe->len) #define PIPE_READERS(inode) ((inode).i_pipe->readers) #define PIPE_WRITERS(inode) ((inode).i_pipe->writers) #define PIPE_WAITING_WRITERS(inode) ((inode).i_pipe->waiting_writers) diff --git a/include/linux/pm.h b/include/linux/pm.h index 7aeb208ed713..5cfb07648eca 100644 --- a/include/linux/pm.h +++ b/include/linux/pm.h @@ -186,7 +186,9 @@ extern int pm_suspend(suspend_state_t state); struct device; -typedef u32 __bitwise pm_message_t; +typedef struct pm_message { + int event; +} pm_message_t; /* * There are 4 important states driver can be in: @@ -207,9 +209,13 @@ typedef u32 __bitwise pm_message_t; * or something similar soon. */ -#define PMSG_FREEZE ((__force pm_message_t) 3) -#define PMSG_SUSPEND ((__force pm_message_t) 3) -#define PMSG_ON ((__force pm_message_t) 0) +#define PM_EVENT_ON 0 +#define PM_EVENT_FREEZE 1 +#define PM_EVENT_SUSPEND 2 + +#define PMSG_FREEZE ((struct pm_message){ .event = PM_EVENT_FREEZE, }) +#define PMSG_SUSPEND ((struct pm_message){ .event = PM_EVENT_SUSPEND, }) +#define PMSG_ON ((struct pm_message){ .event = PM_EVENT_ON, }) struct dev_pm_info { pm_message_t power_state; diff --git a/include/linux/pnp.h b/include/linux/pnp.h index 5ec2bd0c2848..aadbac29103c 100644 --- a/include/linux/pnp.h +++ b/include/linux/pnp.h @@ -443,7 +443,7 @@ static inline void pnp_unregister_driver(struct pnp_driver *drv) { ; } #define pnp_info(format, arg...) printk(KERN_INFO "pnp: " format "\n" , ## arg) #define pnp_warn(format, arg...) printk(KERN_WARNING "pnp: " format "\n" , ## arg) -#ifdef DEBUG +#ifdef CONFIG_PNP_DEBUG #define pnp_dbg(format, arg...) printk(KERN_DEBUG "pnp: " format "\n" , ## arg) #else #define pnp_dbg(format, arg...) do {} while (0) diff --git a/include/linux/ptrace.h b/include/linux/ptrace.h index a373fc254df2..dc6f3647bfbc 100644 --- a/include/linux/ptrace.h +++ b/include/linux/ptrace.h @@ -20,6 +20,8 @@ #define PTRACE_DETACH 0x11 #define PTRACE_SYSCALL 24 +#define PTRACE_SYSEMU 31 +#define PTRACE_SYSEMU_SINGLESTEP 32 /* 0x4200-0x4300 are reserved for architecture-independent additions. */ #define PTRACE_SETOPTIONS 0x4200 @@ -88,6 +90,7 @@ extern void __ptrace_link(struct task_struct *child, struct task_struct *new_parent); extern void __ptrace_unlink(struct task_struct *child); extern void ptrace_untrace(struct task_struct *child); +extern int ptrace_may_attach(struct task_struct *task); static inline void ptrace_link(struct task_struct *child, struct task_struct *new_parent) diff --git a/include/linux/raid/bitmap.h b/include/linux/raid/bitmap.h index 4bf1659f8aa8..9de99198caf1 100644 --- a/include/linux/raid/bitmap.h +++ b/include/linux/raid/bitmap.h @@ -7,7 +7,7 @@ #define BITMAP_H 1 #define BITMAP_MAJOR 3 -#define BITMAP_MINOR 38 +#define BITMAP_MINOR 39 /* * in-memory bitmap: @@ -147,8 +147,9 @@ typedef struct bitmap_super_s { __u32 state; /* 48 bitmap state information */ __u32 chunksize; /* 52 the bitmap chunk size in bytes */ __u32 daemon_sleep; /* 56 seconds between disk flushes */ + __u32 write_behind; /* 60 number of outstanding write-behind writes */ - __u8 pad[256 - 60]; /* set to zero */ + __u8 pad[256 - 64]; /* set to zero */ } bitmap_super_t; /* notes: @@ -226,6 +227,9 @@ struct bitmap { unsigned long flags; + unsigned long max_write_behind; /* write-behind mode */ + atomic_t behind_writes; + /* * the bitmap daemon - periodically wakes up and sweeps the bitmap * file, cleaning up bits and flushing out pages to disk as necessary @@ -260,9 +264,10 @@ int bitmap_setallbits(struct bitmap *bitmap); void bitmap_write_all(struct bitmap *bitmap); /* these are exported */ -int bitmap_startwrite(struct bitmap *bitmap, sector_t offset, unsigned long sectors); -void bitmap_endwrite(struct bitmap *bitmap, sector_t offset, unsigned long sectors, - int success); +int bitmap_startwrite(struct bitmap *bitmap, sector_t offset, + unsigned long sectors, int behind); +void bitmap_endwrite(struct bitmap *bitmap, sector_t offset, + unsigned long sectors, int success, int behind); int bitmap_start_sync(struct bitmap *bitmap, sector_t offset, int *blocks, int degraded); void bitmap_end_sync(struct bitmap *bitmap, sector_t offset, int *blocks, int aborted); void bitmap_close_sync(struct bitmap *bitmap); diff --git a/include/linux/raid/linear.h b/include/linux/raid/linear.h index e04c4fe45b53..7eaf290e10e7 100644 --- a/include/linux/raid/linear.h +++ b/include/linux/raid/linear.h @@ -14,8 +14,8 @@ typedef struct dev_info dev_info_t; struct linear_private_data { dev_info_t **hash_table; - dev_info_t *smallest; - int nr_zones; + sector_t hash_spacing; + int preshift; /* shift before dividing by hash_spacing */ dev_info_t disks[0]; }; diff --git a/include/linux/raid/md_k.h b/include/linux/raid/md_k.h index 8c14ba565a45..ebce949b1443 100644 --- a/include/linux/raid/md_k.h +++ b/include/linux/raid/md_k.h @@ -86,70 +86,6 @@ typedef struct mdk_rdev_s mdk_rdev_t; #define MAX_CHUNK_SIZE (4096*1024) /* - * default readahead - */ - -static inline int disk_faulty(mdp_disk_t * d) -{ - return d->state & (1 << MD_DISK_FAULTY); -} - -static inline int disk_active(mdp_disk_t * d) -{ - return d->state & (1 << MD_DISK_ACTIVE); -} - -static inline int disk_sync(mdp_disk_t * d) -{ - return d->state & (1 << MD_DISK_SYNC); -} - -static inline int disk_spare(mdp_disk_t * d) -{ - return !disk_sync(d) && !disk_active(d) && !disk_faulty(d); -} - -static inline int disk_removed(mdp_disk_t * d) -{ - return d->state & (1 << MD_DISK_REMOVED); -} - -static inline void mark_disk_faulty(mdp_disk_t * d) -{ - d->state |= (1 << MD_DISK_FAULTY); -} - -static inline void mark_disk_active(mdp_disk_t * d) -{ - d->state |= (1 << MD_DISK_ACTIVE); -} - -static inline void mark_disk_sync(mdp_disk_t * d) -{ - d->state |= (1 << MD_DISK_SYNC); -} - -static inline void mark_disk_spare(mdp_disk_t * d) -{ - d->state = 0; -} - -static inline void mark_disk_removed(mdp_disk_t * d) -{ - d->state = (1 << MD_DISK_FAULTY) | (1 << MD_DISK_REMOVED); -} - -static inline void mark_disk_inactive(mdp_disk_t * d) -{ - d->state &= ~(1 << MD_DISK_ACTIVE); -} - -static inline void mark_disk_nonsync(mdp_disk_t * d) -{ - d->state &= ~(1 << MD_DISK_SYNC); -} - -/* * MD's 'extended' device */ struct mdk_rdev_s @@ -166,6 +102,7 @@ struct mdk_rdev_s int sb_loaded; sector_t data_offset; /* start of data in array */ sector_t sb_offset; + int sb_size; /* bytes in the superblock */ int preferred_minor; /* autorun support */ /* A device can be in one of three states based on two flags: @@ -181,6 +118,9 @@ struct mdk_rdev_s int faulty; /* if faulty do not issue IO requests */ int in_sync; /* device is a full member of the array */ + unsigned long flags; /* Should include faulty and in_sync here. */ +#define WriteMostly 4 /* Avoid reading if at all possible */ + int desc_nr; /* descriptor index in the superblock */ int raid_disk; /* role of device in array */ int saved_raid_disk; /* role that device used to have in the @@ -272,12 +212,19 @@ struct mddev_s atomic_t writes_pending; request_queue_t *queue; /* for plugging ... */ + atomic_t write_behind; /* outstanding async IO */ + unsigned int max_write_behind; /* 0 = sync */ + struct bitmap *bitmap; /* the bitmap for the device */ struct file *bitmap_file; /* the bitmap file */ long bitmap_offset; /* offset from superblock of * start of bitmap. May be * negative, but not '0' */ + long default_bitmap_offset; /* this is the offset to use when + * hot-adding a bitmap. It should + * eventually be settable by sysfs. + */ struct list_head all_mddevs; }; @@ -314,6 +261,12 @@ struct mdk_personality_s int (*resize) (mddev_t *mddev, sector_t sectors); int (*reshape) (mddev_t *mddev, int raid_disks); int (*reconfig) (mddev_t *mddev, int layout, int chunk_size); + /* quiesce moves between quiescence states + * 0 - fully active + * 1 - no new requests allowed + * others - reserved + */ + void (*quiesce) (mddev_t *mddev, int state); }; diff --git a/include/linux/raid/md_p.h b/include/linux/raid/md_p.h index dc65cd435494..c100fa5d4bfa 100644 --- a/include/linux/raid/md_p.h +++ b/include/linux/raid/md_p.h @@ -79,6 +79,11 @@ #define MD_DISK_SYNC 2 /* disk is in sync with the raid set */ #define MD_DISK_REMOVED 3 /* disk is in sync with the raid set */ +#define MD_DISK_WRITEMOSTLY 9 /* disk is "write-mostly" is RAID1 config. + * read requests will only be sent here in + * dire need + */ + typedef struct mdp_device_descriptor_s { __u32 number; /* 0 Device number in the entire set */ __u32 major; /* 1 Device major number */ @@ -193,7 +198,7 @@ struct mdp_superblock_1 { __u64 ctime; /* lo 40 bits are seconds, top 24 are microseconds or 0*/ __u32 level; /* -4 (multipath), -1 (linear), 0,1,4,5 */ - __u32 layout; /* only for raid5 currently */ + __u32 layout; /* only for raid5 and raid10 currently */ __u64 size; /* used size of component devices, in 512byte sectors */ __u32 chunksize; /* in 512byte sectors */ @@ -212,7 +217,9 @@ struct mdp_superblock_1 { __u32 dev_number; /* permanent identifier of this device - not role in raid */ __u32 cnt_corrected_read; /* number of read errors that were corrected by re-writing */ __u8 device_uuid[16]; /* user-space setable, ignored by kernel */ - __u8 pad2[64-56]; /* set to 0 when writing */ + __u8 devflags; /* per-device flags. Only one defined...*/ +#define WriteMostly1 1 /* mask for writemostly flag in above */ + __u8 pad2[64-57]; /* set to 0 when writing */ /* array state information - 64 bytes */ __u64 utime; /* 40 bits second, 24 btes microseconds */ @@ -231,5 +238,10 @@ struct mdp_superblock_1 { __u16 dev_roles[0]; /* role in array, or 0xffff for a spare, or 0xfffe for faulty */ }; +/* feature_map bits */ +#define MD_FEATURE_BITMAP_OFFSET 1 + +#define MD_FEATURE_ALL 1 + #endif diff --git a/include/linux/raid/raid1.h b/include/linux/raid/raid1.h index 9d93cf12e890..60e19b667548 100644 --- a/include/linux/raid/raid1.h +++ b/include/linux/raid/raid1.h @@ -80,6 +80,9 @@ struct r1bio_s { atomic_t remaining; /* 'have we finished' count, * used from IRQ handlers */ + atomic_t behind_remaining; /* number of write-behind ios remaining + * in this BehindIO request + */ sector_t sector; int sectors; unsigned long state; @@ -107,4 +110,14 @@ struct r1bio_s { #define R1BIO_Uptodate 0 #define R1BIO_IsSync 1 #define R1BIO_Degraded 2 +#define R1BIO_BehindIO 3 +/* For write-behind requests, we call bi_end_io when + * the last non-write-behind device completes, providing + * any write was successful. Otherwise we call when + * any write-behind write succeeds, otherwise we call + * with failure when last write completes (and all failed). + * Record that bi_end_io was called with this flag... + */ +#define R1BIO_Returned 4 + #endif diff --git a/include/linux/raid/raid5.h b/include/linux/raid/raid5.h index d63ddcb4afad..176fc653c284 100644 --- a/include/linux/raid/raid5.h +++ b/include/linux/raid/raid5.h @@ -134,6 +134,7 @@ struct stripe_head { unsigned long state; /* state flags */ atomic_t count; /* nr of active thread/requests */ spinlock_t lock; + int bm_seq; /* sequence number for bitmap flushes */ struct r5dev { struct bio req; struct bio_vec vec; @@ -165,12 +166,13 @@ struct stripe_head { /* * Stripe state */ -#define STRIPE_ERROR 1 #define STRIPE_HANDLE 2 #define STRIPE_SYNCING 3 #define STRIPE_INSYNC 4 #define STRIPE_PREREAD_ACTIVE 5 #define STRIPE_DELAYED 6 +#define STRIPE_DEGRADED 7 +#define STRIPE_BIT_DELAY 8 /* * Plugging: @@ -210,10 +212,20 @@ struct raid5_private_data { struct list_head handle_list; /* stripes needing handling */ struct list_head delayed_list; /* stripes that have plugged requests */ + struct list_head bitmap_list; /* stripes delaying awaiting bitmap update */ atomic_t preread_active_stripes; /* stripes with scheduled io */ char cache_name[20]; kmem_cache_t *slab_cache; /* for allocating stripes */ + + int seq_flush, seq_write; + int quiesce; + + int fullsync; /* set to 1 if a full sync is needed, + * (fresh device added). + * Cleared when a sync completes. + */ + /* * Free stripes pool */ diff --git a/include/linux/raid_class.h b/include/linux/raid_class.h new file mode 100644 index 000000000000..a71123c28272 --- /dev/null +++ b/include/linux/raid_class.h @@ -0,0 +1,59 @@ +/* + */ +#include <linux/transport_class.h> + +struct raid_template { + struct transport_container raid_attrs; +}; + +struct raid_function_template { + void *cookie; + int (*is_raid)(struct device *); + void (*get_resync)(struct device *); + void (*get_state)(struct device *); +}; + +enum raid_state { + RAID_ACTIVE = 1, + RAID_DEGRADED, + RAID_RESYNCING, + RAID_OFFLINE, +}; + +struct raid_data { + struct list_head component_list; + int component_count; + int level; + enum raid_state state; + int resync; +}; + +#define DEFINE_RAID_ATTRIBUTE(type, attr) \ +static inline void \ +raid_set_##attr(struct raid_template *r, struct device *dev, type value) { \ + struct class_device *cdev = \ + attribute_container_find_class_device(&r->raid_attrs.ac, dev);\ + struct raid_data *rd; \ + BUG_ON(!cdev); \ + rd = class_get_devdata(cdev); \ + rd->attr = value; \ +} \ +static inline type \ +raid_get_##attr(struct raid_template *r, struct device *dev) { \ + struct class_device *cdev = \ + attribute_container_find_class_device(&r->raid_attrs.ac, dev);\ + struct raid_data *rd; \ + BUG_ON(!cdev); \ + rd = class_get_devdata(cdev); \ + return rd->attr; \ +} + +DEFINE_RAID_ATTRIBUTE(int, level) +DEFINE_RAID_ATTRIBUTE(int, resync) +DEFINE_RAID_ATTRIBUTE(enum raid_state, state) + +struct raid_template *raid_class_attach(struct raid_function_template *); +void raid_class_release(struct raid_template *); + +void raid_component_add(struct raid_template *, struct device *, + struct device *); diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h index fd276adf0fd5..4e65eb44adfd 100644 --- a/include/linux/rcupdate.h +++ b/include/linux/rcupdate.h @@ -52,8 +52,8 @@ struct rcu_head { void (*func)(struct rcu_head *head); }; -#define RCU_HEAD_INIT(head) { .next = NULL, .func = NULL } -#define RCU_HEAD(head) struct rcu_head head = RCU_HEAD_INIT(head) +#define RCU_HEAD_INIT { .next = NULL, .func = NULL } +#define RCU_HEAD(head) struct rcu_head head = RCU_HEAD_INIT #define INIT_RCU_HEAD(ptr) do { \ (ptr)->next = NULL; (ptr)->func = NULL; \ } while (0) diff --git a/include/linux/rcuref.h b/include/linux/rcuref.h new file mode 100644 index 000000000000..e1adbba14b67 --- /dev/null +++ b/include/linux/rcuref.h @@ -0,0 +1,220 @@ +/* + * rcuref.h + * + * Reference counting for elements of lists/arrays protected by + * RCU. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + * Copyright (C) IBM Corporation, 2005 + * + * Author: Dipankar Sarma <dipankar@in.ibm.com> + * Ravikiran Thirumalai <kiran_th@gmail.com> + * + * See Documentation/RCU/rcuref.txt for detailed user guide. + * + */ + +#ifndef _RCUREF_H_ +#define _RCUREF_H_ + +#ifdef __KERNEL__ + +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/spinlock.h> +#include <asm/atomic.h> + +/* + * These APIs work on traditional atomic_t counters used in the + * kernel for reference counting. Under special circumstances + * where a lock-free get() operation races with a put() operation + * these APIs can be used. See Documentation/RCU/rcuref.txt. + */ + +#ifdef __HAVE_ARCH_CMPXCHG + +/** + * rcuref_inc - increment refcount for object. + * @rcuref: reference counter in the object in question. + * + * This should be used only for objects where we use RCU and + * use the rcuref_inc_lf() api to acquire a reference + * in a lock-free reader-side critical section. + */ +static inline void rcuref_inc(atomic_t *rcuref) +{ + atomic_inc(rcuref); +} + +/** + * rcuref_dec - decrement refcount for object. + * @rcuref: reference counter in the object in question. + * + * This should be used only for objects where we use RCU and + * use the rcuref_inc_lf() api to acquire a reference + * in a lock-free reader-side critical section. + */ +static inline void rcuref_dec(atomic_t *rcuref) +{ + atomic_dec(rcuref); +} + +/** + * rcuref_dec_and_test - decrement refcount for object and test + * @rcuref: reference counter in the object. + * @release: pointer to the function that will clean up the object + * when the last reference to the object is released. + * This pointer is required. + * + * Decrement the refcount, and if 0, return 1. Else return 0. + * + * This should be used only for objects where we use RCU and + * use the rcuref_inc_lf() api to acquire a reference + * in a lock-free reader-side critical section. + */ +static inline int rcuref_dec_and_test(atomic_t *rcuref) +{ + return atomic_dec_and_test(rcuref); +} + +/* + * cmpxchg is needed on UP too, if deletions to the list/array can happen + * in interrupt context. + */ + +/** + * rcuref_inc_lf - Take reference to an object in a read-side + * critical section protected by RCU. + * @rcuref: reference counter in the object in question. + * + * Try and increment the refcount by 1. The increment might fail if + * the reference counter has been through a 1 to 0 transition and + * is no longer part of the lock-free list. + * Returns non-zero on successful increment and zero otherwise. + */ +static inline int rcuref_inc_lf(atomic_t *rcuref) +{ + int c, old; + c = atomic_read(rcuref); + while (c && (old = cmpxchg(&rcuref->counter, c, c + 1)) != c) + c = old; + return c; +} + +#else /* !__HAVE_ARCH_CMPXCHG */ + +extern spinlock_t __rcuref_hash[]; + +/* + * Use a hash table of locks to protect the reference count + * since cmpxchg is not available in this arch. + */ +#ifdef CONFIG_SMP +#define RCUREF_HASH_SIZE 4 +#define RCUREF_HASH(k) \ + (&__rcuref_hash[(((unsigned long)k)>>8) & (RCUREF_HASH_SIZE-1)]) +#else +#define RCUREF_HASH_SIZE 1 +#define RCUREF_HASH(k) &__rcuref_hash[0] +#endif /* CONFIG_SMP */ + +/** + * rcuref_inc - increment refcount for object. + * @rcuref: reference counter in the object in question. + * + * This should be used only for objects where we use RCU and + * use the rcuref_inc_lf() api to acquire a reference in a lock-free + * reader-side critical section. + */ +static inline void rcuref_inc(atomic_t *rcuref) +{ + unsigned long flags; + spin_lock_irqsave(RCUREF_HASH(rcuref), flags); + rcuref->counter += 1; + spin_unlock_irqrestore(RCUREF_HASH(rcuref), flags); +} + +/** + * rcuref_dec - decrement refcount for object. + * @rcuref: reference counter in the object in question. + * + * This should be used only for objects where we use RCU and + * use the rcuref_inc_lf() api to acquire a reference in a lock-free + * reader-side critical section. + */ +static inline void rcuref_dec(atomic_t *rcuref) +{ + unsigned long flags; + spin_lock_irqsave(RCUREF_HASH(rcuref), flags); + rcuref->counter -= 1; + spin_unlock_irqrestore(RCUREF_HASH(rcuref), flags); +} + +/** + * rcuref_dec_and_test - decrement refcount for object and test + * @rcuref: reference counter in the object. + * @release: pointer to the function that will clean up the object + * when the last reference to the object is released. + * This pointer is required. + * + * Decrement the refcount, and if 0, return 1. Else return 0. + * + * This should be used only for objects where we use RCU and + * use the rcuref_inc_lf() api to acquire a reference in a lock-free + * reader-side critical section. + */ +static inline int rcuref_dec_and_test(atomic_t *rcuref) +{ + unsigned long flags; + spin_lock_irqsave(RCUREF_HASH(rcuref), flags); + rcuref->counter--; + if (!rcuref->counter) { + spin_unlock_irqrestore(RCUREF_HASH(rcuref), flags); + return 1; + } else { + spin_unlock_irqrestore(RCUREF_HASH(rcuref), flags); + return 0; + } +} + +/** + * rcuref_inc_lf - Take reference to an object of a lock-free collection + * by traversing a lock-free list/array. + * @rcuref: reference counter in the object in question. + * + * Try and increment the refcount by 1. The increment might fail if + * the reference counter has been through a 1 to 0 transition and + * object is no longer part of the lock-free list. + * Returns non-zero on successful increment and zero otherwise. + */ +static inline int rcuref_inc_lf(atomic_t *rcuref) +{ + int ret; + unsigned long flags; + spin_lock_irqsave(RCUREF_HASH(rcuref), flags); + if (rcuref->counter) + ret = rcuref->counter++; + else + ret = 0; + spin_unlock_irqrestore(RCUREF_HASH(rcuref), flags); + return ret; +} + + +#endif /* !__HAVE_ARCH_CMPXCHG */ + +#endif /* __KERNEL__ */ +#endif /* _RCUREF_H_ */ diff --git a/include/linux/relayfs_fs.h b/include/linux/relayfs_fs.h new file mode 100644 index 000000000000..cfafc3e76bc2 --- /dev/null +++ b/include/linux/relayfs_fs.h @@ -0,0 +1,255 @@ +/* + * linux/include/linux/relayfs_fs.h + * + * Copyright (C) 2002, 2003 - Tom Zanussi (zanussi@us.ibm.com), IBM Corp + * Copyright (C) 1999, 2000, 2001, 2002 - Karim Yaghmour (karim@opersys.com) + * + * RelayFS definitions and declarations + */ + +#ifndef _LINUX_RELAYFS_FS_H +#define _LINUX_RELAYFS_FS_H + +#include <linux/config.h> +#include <linux/types.h> +#include <linux/sched.h> +#include <linux/wait.h> +#include <linux/list.h> +#include <linux/fs.h> +#include <linux/poll.h> +#include <linux/kref.h> + +/* + * Tracks changes to rchan_buf struct + */ +#define RELAYFS_CHANNEL_VERSION 5 + +/* + * Per-cpu relay channel buffer + */ +struct rchan_buf +{ + void *start; /* start of channel buffer */ + void *data; /* start of current sub-buffer */ + size_t offset; /* current offset into sub-buffer */ + size_t subbufs_produced; /* count of sub-buffers produced */ + size_t subbufs_consumed; /* count of sub-buffers consumed */ + struct rchan *chan; /* associated channel */ + wait_queue_head_t read_wait; /* reader wait queue */ + struct work_struct wake_readers; /* reader wake-up work struct */ + struct dentry *dentry; /* channel file dentry */ + struct kref kref; /* channel buffer refcount */ + struct page **page_array; /* array of current buffer pages */ + unsigned int page_count; /* number of current buffer pages */ + unsigned int finalized; /* buffer has been finalized */ + size_t *padding; /* padding counts per sub-buffer */ + size_t prev_padding; /* temporary variable */ + size_t bytes_consumed; /* bytes consumed in cur read subbuf */ + unsigned int cpu; /* this buf's cpu */ +} ____cacheline_aligned; + +/* + * Relay channel data structure + */ +struct rchan +{ + u32 version; /* the version of this struct */ + size_t subbuf_size; /* sub-buffer size */ + size_t n_subbufs; /* number of sub-buffers per buffer */ + size_t alloc_size; /* total buffer size allocated */ + struct rchan_callbacks *cb; /* client callbacks */ + struct kref kref; /* channel refcount */ + void *private_data; /* for user-defined data */ + struct rchan_buf *buf[NR_CPUS]; /* per-cpu channel buffers */ +}; + +/* + * Relayfs inode + */ +struct relayfs_inode_info +{ + struct inode vfs_inode; + struct rchan_buf *buf; +}; + +static inline struct relayfs_inode_info *RELAYFS_I(struct inode *inode) +{ + return container_of(inode, struct relayfs_inode_info, vfs_inode); +} + +/* + * Relay channel client callbacks + */ +struct rchan_callbacks +{ + /* + * subbuf_start - called on buffer-switch to a new sub-buffer + * @buf: the channel buffer containing the new sub-buffer + * @subbuf: the start of the new sub-buffer + * @prev_subbuf: the start of the previous sub-buffer + * @prev_padding: unused space at the end of previous sub-buffer + * + * The client should return 1 to continue logging, 0 to stop + * logging. + * + * NOTE: subbuf_start will also be invoked when the buffer is + * created, so that the first sub-buffer can be initialized + * if necessary. In this case, prev_subbuf will be NULL. + * + * NOTE: the client can reserve bytes at the beginning of the new + * sub-buffer by calling subbuf_start_reserve() in this callback. + */ + int (*subbuf_start) (struct rchan_buf *buf, + void *subbuf, + void *prev_subbuf, + size_t prev_padding); + + /* + * buf_mapped - relayfs buffer mmap notification + * @buf: the channel buffer + * @filp: relayfs file pointer + * + * Called when a relayfs file is successfully mmapped + */ + void (*buf_mapped)(struct rchan_buf *buf, + struct file *filp); + + /* + * buf_unmapped - relayfs buffer unmap notification + * @buf: the channel buffer + * @filp: relayfs file pointer + * + * Called when a relayfs file is successfully unmapped + */ + void (*buf_unmapped)(struct rchan_buf *buf, + struct file *filp); +}; + +/* + * relayfs kernel API, fs/relayfs/relay.c + */ + +struct rchan *relay_open(const char *base_filename, + struct dentry *parent, + size_t subbuf_size, + size_t n_subbufs, + struct rchan_callbacks *cb); +extern void relay_close(struct rchan *chan); +extern void relay_flush(struct rchan *chan); +extern void relay_subbufs_consumed(struct rchan *chan, + unsigned int cpu, + size_t consumed); +extern void relay_reset(struct rchan *chan); +extern int relay_buf_full(struct rchan_buf *buf); + +extern size_t relay_switch_subbuf(struct rchan_buf *buf, + size_t length); +extern struct dentry *relayfs_create_dir(const char *name, + struct dentry *parent); +extern int relayfs_remove_dir(struct dentry *dentry); + +/** + * relay_write - write data into the channel + * @chan: relay channel + * @data: data to be written + * @length: number of bytes to write + * + * Writes data into the current cpu's channel buffer. + * + * Protects the buffer by disabling interrupts. Use this + * if you might be logging from interrupt context. Try + * __relay_write() if you know you won't be logging from + * interrupt context. + */ +static inline void relay_write(struct rchan *chan, + const void *data, + size_t length) +{ + unsigned long flags; + struct rchan_buf *buf; + + local_irq_save(flags); + buf = chan->buf[smp_processor_id()]; + if (unlikely(buf->offset + length > chan->subbuf_size)) + length = relay_switch_subbuf(buf, length); + memcpy(buf->data + buf->offset, data, length); + buf->offset += length; + local_irq_restore(flags); +} + +/** + * __relay_write - write data into the channel + * @chan: relay channel + * @data: data to be written + * @length: number of bytes to write + * + * Writes data into the current cpu's channel buffer. + * + * Protects the buffer by disabling preemption. Use + * relay_write() if you might be logging from interrupt + * context. + */ +static inline void __relay_write(struct rchan *chan, + const void *data, + size_t length) +{ + struct rchan_buf *buf; + + buf = chan->buf[get_cpu()]; + if (unlikely(buf->offset + length > buf->chan->subbuf_size)) + length = relay_switch_subbuf(buf, length); + memcpy(buf->data + buf->offset, data, length); + buf->offset += length; + put_cpu(); +} + +/** + * relay_reserve - reserve slot in channel buffer + * @chan: relay channel + * @length: number of bytes to reserve + * + * Returns pointer to reserved slot, NULL if full. + * + * Reserves a slot in the current cpu's channel buffer. + * Does not protect the buffer at all - caller must provide + * appropriate synchronization. + */ +static inline void *relay_reserve(struct rchan *chan, size_t length) +{ + void *reserved; + struct rchan_buf *buf = chan->buf[smp_processor_id()]; + + if (unlikely(buf->offset + length > buf->chan->subbuf_size)) { + length = relay_switch_subbuf(buf, length); + if (!length) + return NULL; + } + reserved = buf->data + buf->offset; + buf->offset += length; + + return reserved; +} + +/** + * subbuf_start_reserve - reserve bytes at the start of a sub-buffer + * @buf: relay channel buffer + * @length: number of bytes to reserve + * + * Helper function used to reserve bytes at the beginning of + * a sub-buffer in the subbuf_start() callback. + */ +static inline void subbuf_start_reserve(struct rchan_buf *buf, + size_t length) +{ + BUG_ON(length >= buf->chan->subbuf_size - 1); + buf->offset = length; +} + +/* + * exported relayfs file operations, fs/relayfs/inode.c + */ + +extern struct file_operations relayfs_file_operations; + +#endif /* _LINUX_RELAYFS_FS_H */ + diff --git a/include/linux/sched.h b/include/linux/sched.h index dec5827c7742..c551e6a1447e 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -35,6 +35,8 @@ #include <linux/topology.h> #include <linux/seccomp.h> +#include <linux/auxvec.h> /* For AT_VECTOR_SIZE */ + struct exec_domain; /* @@ -176,6 +178,23 @@ extern void trap_init(void); extern void update_process_times(int user); extern void scheduler_tick(void); +#ifdef CONFIG_DETECT_SOFTLOCKUP +extern void softlockup_tick(struct pt_regs *regs); +extern void spawn_softlockup_task(void); +extern void touch_softlockup_watchdog(void); +#else +static inline void softlockup_tick(struct pt_regs *regs) +{ +} +static inline void spawn_softlockup_task(void) +{ +} +static inline void touch_softlockup_watchdog(void) +{ +} +#endif + + /* Attach to any functions which should be ignored in wchan output. */ #define __sched __attribute__((__section__(".sched.text"))) /* Is this address in the __sched functions? */ @@ -244,7 +263,7 @@ struct mm_struct { mm_counter_t _rss; mm_counter_t _anon_rss; - unsigned long saved_auxv[42]; /* for /proc/PID/auxv */ + unsigned long saved_auxv[AT_VECTOR_SIZE]; /* for /proc/PID/auxv */ unsigned dumpable:2; cpumask_t cpu_vm_mask; @@ -545,13 +564,6 @@ struct sched_domain { extern void partition_sched_domains(cpumask_t *partition1, cpumask_t *partition2); -#ifdef ARCH_HAS_SCHED_DOMAIN -/* Useful helpers that arch setup code may use. Defined in kernel/sched.c */ -extern cpumask_t cpu_isolated_map; -extern void init_sched_build_groups(struct sched_group groups[], - cpumask_t span, int (*group_fn)(int cpu)); -extern void cpu_attach_domain(struct sched_domain *sd, int cpu); -#endif /* ARCH_HAS_SCHED_DOMAIN */ #endif /* CONFIG_SMP */ @@ -592,6 +604,11 @@ extern int groups_search(struct group_info *group_info, gid_t grp); #define GROUP_AT(gi, i) \ ((gi)->blocks[(i)/NGROUPS_PER_BLOCK][(i)%NGROUPS_PER_BLOCK]) +#ifdef ARCH_HAS_PREFETCH_SWITCH_STACK +extern void prefetch_stack(struct task_struct*); +#else +static inline void prefetch_stack(struct task_struct *t) { } +#endif struct audit_context; /* See audit.c */ struct mempolicy; diff --git a/include/linux/security.h b/include/linux/security.h index 7aab6ab7c57f..55b02e1c73f4 100644 --- a/include/linux/security.h +++ b/include/linux/security.h @@ -250,29 +250,37 @@ struct swap_info_struct; * @inode contains the inode structure. * Deallocate the inode security structure and set @inode->i_security to * NULL. + * @inode_init_security: + * Obtain the security attribute name suffix and value to set on a newly + * created inode and set up the incore security field for the new inode. + * This hook is called by the fs code as part of the inode creation + * transaction and provides for atomic labeling of the inode, unlike + * the post_create/mkdir/... hooks called by the VFS. The hook function + * is expected to allocate the name and value via kmalloc, with the caller + * being responsible for calling kfree after using them. + * If the security module does not use security attributes or does + * not wish to put a security attribute on this particular inode, + * then it should return -EOPNOTSUPP to skip this processing. + * @inode contains the inode structure of the newly created inode. + * @dir contains the inode structure of the parent directory. + * @name will be set to the allocated name suffix (e.g. selinux). + * @value will be set to the allocated attribute value. + * @len will be set to the length of the value. + * Returns 0 if @name and @value have been successfully set, + * -EOPNOTSUPP if no security attribute is needed, or + * -ENOMEM on memory allocation failure. * @inode_create: * Check permission to create a regular file. * @dir contains inode structure of the parent of the new file. * @dentry contains the dentry structure for the file to be created. * @mode contains the file mode of the file to be created. * Return 0 if permission is granted. - * @inode_post_create: - * Set the security attributes on a newly created regular file. This hook - * is called after a file has been successfully created. - * @dir contains the inode structure of the parent directory of the new file. - * @dentry contains the the dentry structure for the newly created file. - * @mode contains the file mode. * @inode_link: * Check permission before creating a new hard link to a file. * @old_dentry contains the dentry structure for an existing link to the file. * @dir contains the inode structure of the parent directory of the new link. * @new_dentry contains the dentry structure for the new link. * Return 0 if permission is granted. - * @inode_post_link: - * Set security attributes for a new hard link to a file. - * @old_dentry contains the dentry structure for the existing link. - * @dir contains the inode structure of the parent directory of the new file. - * @new_dentry contains the dentry structure for the new file link. * @inode_unlink: * Check the permission to remove a hard link to a file. * @dir contains the inode structure of parent directory of the file. @@ -284,13 +292,6 @@ struct swap_info_struct; * @dentry contains the dentry structure of the symbolic link. * @old_name contains the pathname of file. * Return 0 if permission is granted. - * @inode_post_symlink: - * @dir contains the inode structure of the parent directory of the new link. - * @dentry contains the dentry structure of new symbolic link. - * @old_name contains the pathname of file. - * Set security attributes for a newly created symbolic link. Note that - * @dentry->d_inode may be NULL, since the filesystem might not - * instantiate the dentry (e.g. NFS). * @inode_mkdir: * Check permissions to create a new directory in the existing directory * associated with inode strcture @dir. @@ -298,11 +299,6 @@ struct swap_info_struct; * @dentry contains the dentry structure of new directory. * @mode contains the mode of new directory. * Return 0 if permission is granted. - * @inode_post_mkdir: - * Set security attributes on a newly created directory. - * @dir contains the inode structure of parent of the directory to be created. - * @dentry contains the dentry structure of new directory. - * @mode contains the mode of new directory. * @inode_rmdir: * Check the permission to remove a directory. * @dir contains the inode structure of parent of the directory to be removed. @@ -318,13 +314,6 @@ struct swap_info_struct; * @mode contains the mode of the new file. * @dev contains the the device number. * Return 0 if permission is granted. - * @inode_post_mknod: - * Set security attributes on a newly created special file (or socket or - * fifo file created via the mknod system call). - * @dir contains the inode structure of parent of the new node. - * @dentry contains the dentry structure of the new node. - * @mode contains the mode of the new node. - * @dev contains the the device number. * @inode_rename: * Check for permission to rename a file or directory. * @old_dir contains the inode structure for parent of the old link. @@ -332,12 +321,6 @@ struct swap_info_struct; * @new_dir contains the inode structure for parent of the new link. * @new_dentry contains the dentry structure of the new link. * Return 0 if permission is granted. - * @inode_post_rename: - * Set security attributes on a renamed file or directory. - * @old_dir contains the inode structure for parent of the old link. - * @old_dentry contains the dentry structure of the old link. - * @new_dir contains the inode structure for parent of the new link. - * @new_dentry contains the dentry structure of the new link. * @inode_readlink: * Check the permission to read the symbolic link. * @dentry contains the dentry structure for the file link. @@ -1080,34 +1063,21 @@ struct security_operations { int (*inode_alloc_security) (struct inode *inode); void (*inode_free_security) (struct inode *inode); + int (*inode_init_security) (struct inode *inode, struct inode *dir, + char **name, void **value, size_t *len); int (*inode_create) (struct inode *dir, struct dentry *dentry, int mode); - void (*inode_post_create) (struct inode *dir, - struct dentry *dentry, int mode); int (*inode_link) (struct dentry *old_dentry, struct inode *dir, struct dentry *new_dentry); - void (*inode_post_link) (struct dentry *old_dentry, - struct inode *dir, struct dentry *new_dentry); int (*inode_unlink) (struct inode *dir, struct dentry *dentry); int (*inode_symlink) (struct inode *dir, struct dentry *dentry, const char *old_name); - void (*inode_post_symlink) (struct inode *dir, - struct dentry *dentry, - const char *old_name); int (*inode_mkdir) (struct inode *dir, struct dentry *dentry, int mode); - void (*inode_post_mkdir) (struct inode *dir, struct dentry *dentry, - int mode); int (*inode_rmdir) (struct inode *dir, struct dentry *dentry); int (*inode_mknod) (struct inode *dir, struct dentry *dentry, int mode, dev_t dev); - void (*inode_post_mknod) (struct inode *dir, struct dentry *dentry, - int mode, dev_t dev); int (*inode_rename) (struct inode *old_dir, struct dentry *old_dentry, struct inode *new_dir, struct dentry *new_dentry); - void (*inode_post_rename) (struct inode *old_dir, - struct dentry *old_dentry, - struct inode *new_dir, - struct dentry *new_dentry); int (*inode_readlink) (struct dentry *dentry); int (*inode_follow_link) (struct dentry *dentry, struct nameidata *nd); int (*inode_permission) (struct inode *inode, int mask, struct nameidata *nd); @@ -1442,6 +1412,17 @@ static inline void security_inode_free (struct inode *inode) return; security_ops->inode_free_security (inode); } + +static inline int security_inode_init_security (struct inode *inode, + struct inode *dir, + char **name, + void **value, + size_t *len) +{ + if (unlikely (IS_PRIVATE (inode))) + return -EOPNOTSUPP; + return security_ops->inode_init_security (inode, dir, name, value, len); +} static inline int security_inode_create (struct inode *dir, struct dentry *dentry, @@ -1452,15 +1433,6 @@ static inline int security_inode_create (struct inode *dir, return security_ops->inode_create (dir, dentry, mode); } -static inline void security_inode_post_create (struct inode *dir, - struct dentry *dentry, - int mode) -{ - if (dentry->d_inode && unlikely (IS_PRIVATE (dentry->d_inode))) - return; - security_ops->inode_post_create (dir, dentry, mode); -} - static inline int security_inode_link (struct dentry *old_dentry, struct inode *dir, struct dentry *new_dentry) @@ -1470,15 +1442,6 @@ static inline int security_inode_link (struct dentry *old_dentry, return security_ops->inode_link (old_dentry, dir, new_dentry); } -static inline void security_inode_post_link (struct dentry *old_dentry, - struct inode *dir, - struct dentry *new_dentry) -{ - if (new_dentry->d_inode && unlikely (IS_PRIVATE (new_dentry->d_inode))) - return; - security_ops->inode_post_link (old_dentry, dir, new_dentry); -} - static inline int security_inode_unlink (struct inode *dir, struct dentry *dentry) { @@ -1496,15 +1459,6 @@ static inline int security_inode_symlink (struct inode *dir, return security_ops->inode_symlink (dir, dentry, old_name); } -static inline void security_inode_post_symlink (struct inode *dir, - struct dentry *dentry, - const char *old_name) -{ - if (dentry->d_inode && unlikely (IS_PRIVATE (dentry->d_inode))) - return; - security_ops->inode_post_symlink (dir, dentry, old_name); -} - static inline int security_inode_mkdir (struct inode *dir, struct dentry *dentry, int mode) @@ -1514,15 +1468,6 @@ static inline int security_inode_mkdir (struct inode *dir, return security_ops->inode_mkdir (dir, dentry, mode); } -static inline void security_inode_post_mkdir (struct inode *dir, - struct dentry *dentry, - int mode) -{ - if (dentry->d_inode && unlikely (IS_PRIVATE (dentry->d_inode))) - return; - security_ops->inode_post_mkdir (dir, dentry, mode); -} - static inline int security_inode_rmdir (struct inode *dir, struct dentry *dentry) { @@ -1540,15 +1485,6 @@ static inline int security_inode_mknod (struct inode *dir, return security_ops->inode_mknod (dir, dentry, mode, dev); } -static inline void security_inode_post_mknod (struct inode *dir, - struct dentry *dentry, - int mode, dev_t dev) -{ - if (dentry->d_inode && unlikely (IS_PRIVATE (dentry->d_inode))) - return; - security_ops->inode_post_mknod (dir, dentry, mode, dev); -} - static inline int security_inode_rename (struct inode *old_dir, struct dentry *old_dentry, struct inode *new_dir, @@ -1561,18 +1497,6 @@ static inline int security_inode_rename (struct inode *old_dir, new_dir, new_dentry); } -static inline void security_inode_post_rename (struct inode *old_dir, - struct dentry *old_dentry, - struct inode *new_dir, - struct dentry *new_dentry) -{ - if (unlikely (IS_PRIVATE (old_dentry->d_inode) || - (new_dentry->d_inode && IS_PRIVATE (new_dentry->d_inode)))) - return; - security_ops->inode_post_rename (old_dir, old_dentry, - new_dir, new_dentry); -} - static inline int security_inode_readlink (struct dentry *dentry) { if (unlikely (IS_PRIVATE (dentry->d_inode))) @@ -2171,6 +2095,15 @@ static inline int security_inode_alloc (struct inode *inode) static inline void security_inode_free (struct inode *inode) { } + +static inline int security_inode_init_security (struct inode *inode, + struct inode *dir, + char **name, + void **value, + size_t *len) +{ + return -EOPNOTSUPP; +} static inline int security_inode_create (struct inode *dir, struct dentry *dentry, @@ -2179,11 +2112,6 @@ static inline int security_inode_create (struct inode *dir, return 0; } -static inline void security_inode_post_create (struct inode *dir, - struct dentry *dentry, - int mode) -{ } - static inline int security_inode_link (struct dentry *old_dentry, struct inode *dir, struct dentry *new_dentry) @@ -2191,11 +2119,6 @@ static inline int security_inode_link (struct dentry *old_dentry, return 0; } -static inline void security_inode_post_link (struct dentry *old_dentry, - struct inode *dir, - struct dentry *new_dentry) -{ } - static inline int security_inode_unlink (struct inode *dir, struct dentry *dentry) { @@ -2209,11 +2132,6 @@ static inline int security_inode_symlink (struct inode *dir, return 0; } -static inline void security_inode_post_symlink (struct inode *dir, - struct dentry *dentry, - const char *old_name) -{ } - static inline int security_inode_mkdir (struct inode *dir, struct dentry *dentry, int mode) @@ -2221,11 +2139,6 @@ static inline int security_inode_mkdir (struct inode *dir, return 0; } -static inline void security_inode_post_mkdir (struct inode *dir, - struct dentry *dentry, - int mode) -{ } - static inline int security_inode_rmdir (struct inode *dir, struct dentry *dentry) { @@ -2239,11 +2152,6 @@ static inline int security_inode_mknod (struct inode *dir, return 0; } -static inline void security_inode_post_mknod (struct inode *dir, - struct dentry *dentry, - int mode, dev_t dev) -{ } - static inline int security_inode_rename (struct inode *old_dir, struct dentry *old_dentry, struct inode *new_dir, @@ -2252,12 +2160,6 @@ static inline int security_inode_rename (struct inode *old_dir, return 0; } -static inline void security_inode_post_rename (struct inode *old_dir, - struct dentry *old_dentry, - struct inode *new_dir, - struct dentry *new_dentry) -{ } - static inline int security_inode_readlink (struct dentry *dentry) { return 0; diff --git a/include/linux/sem.h b/include/linux/sem.h index 2d8516be9fd7..106f9757339a 100644 --- a/include/linux/sem.h +++ b/include/linux/sem.h @@ -88,6 +88,7 @@ struct sem { /* One sem_array data structure for each set of semaphores in the system. */ struct sem_array { struct kern_ipc_perm sem_perm; /* permissions .. see ipc.h */ + int sem_id; time_t sem_otime; /* last semop time */ time_t sem_ctime; /* last change time */ struct sem *sem_base; /* ptr to first semaphore in array */ diff --git a/include/linux/serial_8250.h b/include/linux/serial_8250.h index d8a023d804d4..317a979b24de 100644 --- a/include/linux/serial_8250.h +++ b/include/linux/serial_8250.h @@ -30,6 +30,21 @@ struct plat_serial8250_port { }; /* + * Allocate 8250 platform device IDs. Nothing is implied by + * the numbering here, except for the legacy entry being -1. + */ +enum { + PLAT8250_DEV_LEGACY = -1, + PLAT8250_DEV_PLATFORM, + PLAT8250_DEV_PLATFORM1, + PLAT8250_DEV_FOURPORT, + PLAT8250_DEV_ACCENT, + PLAT8250_DEV_BOCA, + PLAT8250_DEV_HUB6, + PLAT8250_DEV_MCA, +}; + +/* * This should be used by drivers which want to register * their own 8250 ports without registering their own * platform device. Using these will make your driver diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index cf0f64ea2bc0..27db8da43aa4 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -385,11 +385,11 @@ int uart_resume_port(struct uart_driver *reg, struct uart_port *port); /* * The following are helper functions for the low level drivers. */ -#ifdef SUPPORT_SYSRQ static inline int uart_handle_sysrq_char(struct uart_port *port, unsigned int ch, struct pt_regs *regs) { +#ifdef SUPPORT_SYSRQ if (port->sysrq) { if (ch && time_before(jiffies, port->sysrq)) { handle_sysrq(ch, regs, NULL); @@ -398,10 +398,11 @@ uart_handle_sysrq_char(struct uart_port *port, unsigned int ch, } port->sysrq = 0; } +#endif return 0; } -#else -#define uart_handle_sysrq_char(port,ch,regs) (0) +#ifndef SUPPORT_SYSRQ +#define uart_handle_sysrq_char(port,ch,regs) uart_handle_sysrq_char(port, 0, NULL) #endif /* diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 42edce6abe23..2741c0c55e83 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -1167,7 +1167,7 @@ static inline void skb_postpull_rcsum(struct sk_buff *skb, static inline int pskb_trim_rcsum(struct sk_buff *skb, unsigned int len) { - if (len >= skb->len) + if (likely(len >= skb->len)) return 0; if (skb->ip_summed == CHECKSUM_HW) skb->ip_summed = CHECKSUM_NONE; @@ -1251,7 +1251,7 @@ extern void skb_add_mtu(int mtu); * This function converts the offset back to a struct timeval and stores * it in stamp. */ -static inline void skb_get_timestamp(struct sk_buff *skb, struct timeval *stamp) +static inline void skb_get_timestamp(const struct sk_buff *skb, struct timeval *stamp) { stamp->tv_sec = skb->tstamp.off_sec; stamp->tv_usec = skb->tstamp.off_usec; @@ -1270,7 +1270,7 @@ static inline void skb_get_timestamp(struct sk_buff *skb, struct timeval *stamp) * This function converts a struct timeval to an offset and stores * it in the skb. */ -static inline void skb_set_timestamp(struct sk_buff *skb, struct timeval *stamp) +static inline void skb_set_timestamp(struct sk_buff *skb, const struct timeval *stamp) { skb->tstamp.off_sec = stamp->tv_sec - skb_tv_base.tv_sec; skb->tstamp.off_usec = stamp->tv_usec - skb_tv_base.tv_usec; diff --git a/include/linux/slab.h b/include/linux/slab.h index 80b2dfde2e80..42a6bea58af3 100644 --- a/include/linux/slab.h +++ b/include/linux/slab.h @@ -99,7 +99,21 @@ found: return __kmalloc(size, flags); } -extern void *kcalloc(size_t, size_t, unsigned int __nocast); +extern void *kzalloc(size_t, unsigned int __nocast); + +/** + * kcalloc - allocate memory for an array. The memory is set to zero. + * @n: number of elements. + * @size: element size. + * @flags: the type of memory to allocate. + */ +static inline void *kcalloc(size_t n, size_t size, unsigned int __nocast flags) +{ + if (n != 0 && size > INT_MAX / n) + return NULL; + return kzalloc(n * size, flags); +} + extern void kfree(const void *); extern unsigned int ksize(const void *); diff --git a/include/linux/sonypi.h b/include/linux/sonypi.h index 768cbba617d0..f56d24734950 100644 --- a/include/linux/sonypi.h +++ b/include/linux/sonypi.h @@ -99,6 +99,8 @@ #define SONYPI_EVENT_BATTERY_INSERT 57 #define SONYPI_EVENT_BATTERY_REMOVE 58 #define SONYPI_EVENT_FNKEY_RELEASED 59 +#define SONYPI_EVENT_WIRELESS_ON 60 +#define SONYPI_EVENT_WIRELESS_OFF 61 /* get/set brightness */ #define SONYPI_IOCGBRT _IOR('v', 0, __u8) diff --git a/include/linux/sunrpc/cache.h b/include/linux/sunrpc/cache.h index 6864063d1b9f..c4e3ea7cf154 100644 --- a/include/linux/sunrpc/cache.h +++ b/include/linux/sunrpc/cache.h @@ -60,6 +60,7 @@ struct cache_head { #define CACHE_NEW_EXPIRY 120 /* keep new things pending confirmation for 120 seconds */ struct cache_detail { + struct module * owner; int hash_size; struct cache_head ** hash_table; rwlock_t hash_lock; diff --git a/include/linux/swap.h b/include/linux/swap.h index bfe3e763ccf2..3c9ff0048153 100644 --- a/include/linux/swap.h +++ b/include/linux/swap.h @@ -107,6 +107,8 @@ enum { SWP_USED = (1 << 0), /* is slot in swap_info[] used? */ SWP_WRITEOK = (1 << 1), /* ok to write to this swap? */ SWP_ACTIVE = (SWP_USED | SWP_WRITEOK), + /* add others here before... */ + SWP_SCANNING = (1 << 8), /* refcount in scan_swap_map */ }; #define SWAP_CLUSTER_MAX 32 @@ -116,16 +118,13 @@ enum { /* * The in-memory structure used to track swap areas. - * extent_list.prev points at the lowest-index extent. That list is - * sorted. */ struct swap_info_struct { unsigned int flags; - spinlock_t sdev_lock; + int prio; /* swap priority */ struct file *swap_file; struct block_device *bdev; struct list_head extent_list; - int nr_extents; struct swap_extent *curr_swap_extent; unsigned old_block_size; unsigned short * swap_map; @@ -133,10 +132,9 @@ struct swap_info_struct { unsigned int highest_bit; unsigned int cluster_next; unsigned int cluster_nr; - int prio; /* swap priority */ - int pages; - unsigned long max; - unsigned long inuse_pages; + unsigned int pages; + unsigned int max; + unsigned int inuse_pages; int next; /* next entry on swap list */ }; @@ -222,13 +220,7 @@ extern int can_share_swap_page(struct page *); extern int remove_exclusive_swap_page(struct page *); struct backing_dev_info; -extern struct swap_list_t swap_list; -extern spinlock_t swaplock; - -#define swap_list_lock() spin_lock(&swaplock) -#define swap_list_unlock() spin_unlock(&swaplock) -#define swap_device_lock(p) spin_lock(&p->sdev_lock) -#define swap_device_unlock(p) spin_unlock(&p->sdev_lock) +extern spinlock_t swap_lock; /* linux/mm/thrash.c */ extern struct mm_struct * swap_token_mm; diff --git a/include/linux/swapops.h b/include/linux/swapops.h index d4c7db35e708..87b9d14c710d 100644 --- a/include/linux/swapops.h +++ b/include/linux/swapops.h @@ -4,7 +4,7 @@ * the low-order bits. * * We arrange the `type' and `offset' fields so that `type' is at the five - * high-order bits of the smp_entry_t and `offset' is right-aligned in the + * high-order bits of the swp_entry_t and `offset' is right-aligned in the * remaining bits. * * swp_entry_t's are *never* stored anywhere in their arch-dependent format. diff --git a/include/linux/sysctl.h b/include/linux/sysctl.h index e82be96d4906..532a6c5c24e9 100644 --- a/include/linux/sysctl.h +++ b/include/linux/sysctl.h @@ -711,6 +711,7 @@ enum { DEV_RAID=4, DEV_MAC_HID=5, DEV_SCSI=6, + DEV_IPMI=7, }; /* /proc/sys/dev/cdrom */ @@ -776,6 +777,11 @@ enum { DEV_SCSI_LOGGING_LEVEL=1, }; +/* /proc/sys/dev/ipmi */ +enum { + DEV_IPMI_POWEROFF_POWERCYCLE=1, +}; + /* /proc/sys/abi */ enum { diff --git a/include/linux/time.h b/include/linux/time.h index 5634497ff5df..c10d4c21c183 100644 --- a/include/linux/time.h +++ b/include/linux/time.h @@ -97,7 +97,6 @@ extern int do_settimeofday(struct timespec *tv); extern int do_sys_settimeofday(struct timespec *tv, struct timezone *tz); extern void clock_was_set(void); // call when ever the clock is set extern int do_posix_clock_monotonic_gettime(struct timespec *tp); -extern long do_nanosleep(struct timespec *t); extern long do_utimes(char __user * filename, struct timeval * times); struct itimerval; extern int do_setitimer(int which, struct itimerval *value, struct itimerval *ovalue); diff --git a/include/linux/timer.h b/include/linux/timer.h index 221f81ac2002..3340f3bd135d 100644 --- a/include/linux/timer.h +++ b/include/linux/timer.h @@ -32,6 +32,10 @@ extern struct timer_base_s __init_timer_base; .magic = TIMER_MAGIC, \ } +#define DEFINE_TIMER(_name, _function, _expires, _data) \ + struct timer_list _name = \ + TIMER_INITIALIZER(_function, _expires, _data) + void fastcall init_timer(struct timer_list * timer); /*** diff --git a/include/linux/timex.h b/include/linux/timex.h index 74fdd07d3792..7e050a2cc35b 100644 --- a/include/linux/timex.h +++ b/include/linux/timex.h @@ -260,6 +260,29 @@ extern long pps_calcnt; /* calibration intervals */ extern long pps_errcnt; /* calibration errors */ extern long pps_stbcnt; /* stability limit exceeded */ +/** + * ntp_clear - Clears the NTP state variables + * + * Must be called while holding a write on the xtime_lock + */ +static inline void ntp_clear(void) +{ + time_adjust = 0; /* stop active adjtime() */ + time_status |= STA_UNSYNC; + time_maxerror = NTP_PHASE_LIMIT; + time_esterror = NTP_PHASE_LIMIT; +} + +/** + * ntp_synced - Returns 1 if the NTP status is not UNSYNC + * + */ +static inline int ntp_synced(void) +{ + return !(time_status & STA_UNSYNC); +} + + #ifdef CONFIG_TIME_INTERPOLATION #define TIME_SOURCE_CPU 0 diff --git a/include/linux/topology.h b/include/linux/topology.h index 0320225e96da..3df1d474e5c5 100644 --- a/include/linux/topology.h +++ b/include/linux/topology.h @@ -135,6 +135,29 @@ } #endif +/* sched_domains SD_ALLNODES_INIT for NUMA machines */ +#define SD_ALLNODES_INIT (struct sched_domain) { \ + .span = CPU_MASK_NONE, \ + .parent = NULL, \ + .groups = NULL, \ + .min_interval = 64, \ + .max_interval = 64*num_online_cpus(), \ + .busy_factor = 128, \ + .imbalance_pct = 133, \ + .cache_hot_time = (10*1000000), \ + .cache_nice_tries = 1, \ + .busy_idx = 3, \ + .idle_idx = 3, \ + .newidle_idx = 0, /* unused */ \ + .wake_idx = 0, /* unused */ \ + .forkexec_idx = 0, /* unused */ \ + .per_cpu_gain = 100, \ + .flags = SD_LOAD_BALANCE, \ + .last_balance = jiffies, \ + .balance_interval = 64, \ + .nr_balance_failed = 0, \ +} + #ifdef CONFIG_NUMA #ifndef SD_NODE_INIT #error Please define an appropriate SD_NODE_INIT in include/asm/topology.h!!! diff --git a/include/linux/transport_class.h b/include/linux/transport_class.h index 87d98d1faefb..1d6cc22e5f42 100644 --- a/include/linux/transport_class.h +++ b/include/linux/transport_class.h @@ -12,11 +12,16 @@ #include <linux/device.h> #include <linux/attribute_container.h> +struct transport_container; + struct transport_class { struct class class; - int (*setup)(struct device *); - int (*configure)(struct device *); - int (*remove)(struct device *); + int (*setup)(struct transport_container *, struct device *, + struct class_device *); + int (*configure)(struct transport_container *, struct device *, + struct class_device *); + int (*remove)(struct transport_container *, struct device *, + struct class_device *); }; #define DECLARE_TRANSPORT_CLASS(cls, nm, su, rm, cfg) \ diff --git a/include/linux/tty.h b/include/linux/tty.h index 59ff42c629ec..1267f88ece6e 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -74,7 +74,8 @@ struct screen_info { u16 vesapm_off; /* 0x30 */ u16 pages; /* 0x32 */ u16 vesa_attributes; /* 0x34 */ - /* 0x36 -- 0x3f reserved for future expansion */ + u32 capabilities; /* 0x36 */ + /* 0x3a -- 0x3f reserved for future expansion */ }; extern struct screen_info screen_info; diff --git a/include/linux/usb.h b/include/linux/usb.h index 724637792996..4dbe580f9335 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -5,6 +5,7 @@ #include <linux/usb_ch9.h> #define USB_MAJOR 180 +#define USB_DEVICE_MAJOR 189 #ifdef __KERNEL__ @@ -349,6 +350,7 @@ struct usb_device { char *manufacturer; char *serial; /* static strings from the device */ struct list_head filelist; + struct class_device *class_dev; struct dentry *usbfs_dentry; /* usbfs dentry entry for the device */ /* @@ -614,7 +616,6 @@ extern int usb_disabled(void); #define URB_ISO_ASAP 0x0002 /* iso-only, urb->start_frame ignored */ #define URB_NO_TRANSFER_DMA_MAP 0x0004 /* urb->transfer_dma valid on submit */ #define URB_NO_SETUP_DMA_MAP 0x0008 /* urb->setup_dma valid on submit */ -#define URB_ASYNC_UNLINK 0x0010 /* usb_unlink_urb() returns asap */ #define URB_NO_FSBR 0x0020 /* UHCI-specific */ #define URB_ZERO_PACKET 0x0040 /* Finish bulk OUTs with short packet */ #define URB_NO_INTERRUPT 0x0080 /* HINT: no non-error interrupt needed */ @@ -722,13 +723,7 @@ typedef void (*usb_complete_t)(struct urb *, struct pt_regs *); * Initialization: * * All URBs submitted must initialize the dev, pipe, transfer_flags (may be - * zero), and complete fields. - * The URB_ASYNC_UNLINK transfer flag affects later invocations of - * the usb_unlink_urb() routine. Note: Failure to set URB_ASYNC_UNLINK - * with usb_unlink_urb() is deprecated. For synchronous unlinks use - * usb_kill_urb() instead. - * - * All URBs must also initialize + * zero), and complete fields. All URBs must also initialize * transfer_buffer and transfer_buffer_length. They may provide the * URB_SHORT_NOT_OK transfer flag, indicating that short reads are * to be treated as errors; that flag is invalid for write requests. diff --git a/include/linux/usb_isp116x.h b/include/linux/usb_isp116x.h index 5f5a9d9bd6c2..436dd8a2b64a 100644 --- a/include/linux/usb_isp116x.h +++ b/include/linux/usb_isp116x.h @@ -7,36 +7,18 @@ struct isp116x_platform_data { /* Enable internal resistors on downstream ports */ unsigned sel15Kres:1; - /* Chip's internal clock won't be stopped in suspended state. - Setting/unsetting this bit takes effect only if - 'remote_wakeup_enable' below is not set. */ - unsigned clknotstop:1; - /* On-chip overcurrent protection */ + /* On-chip overcurrent detection */ unsigned oc_enable:1; /* INT output polarity */ unsigned int_act_high:1; /* INT edge or level triggered */ unsigned int_edge_triggered:1; - /* WAKEUP pin connected - NOT SUPPORTED */ - /* unsigned remote_wakeup_connected:1; */ - /* Wakeup by devices on usb bus enabled */ + /* Enable wakeup by devices on usb bus (e.g. wakeup + by attachment/detachment or by device activity + such as moving a mouse). When chosen, this option + prevents stopping internal clock, increasing + thereby power consumption in suspended state. */ unsigned remote_wakeup_enable:1; - /* Switch or not to switch (keep always powered) */ - unsigned no_power_switching:1; - /* Ganged port power switching (0) or individual port - power switching (1) */ - unsigned power_switching_mode:1; - /* Given port_power, msec/2 after power on till power good */ - u8 potpg; - /* Hardware reset set/clear. If implemented, this function must: - if set == 0, deassert chip's HW reset pin - otherwise, assert chip's HW reset pin */ - void (*reset) (struct device * dev, int set); - /* Hardware clock start/stop. If implemented, this function must: - if start == 0, stop the external clock - otherwise, start the external clock - */ - void (*clock) (struct device * dev, int start); /* Inter-io delay (ns). The chip is picky about access timings; it expects at least: 150ns delay between consecutive accesses to DATA_REG, diff --git a/include/linux/videodev.h b/include/linux/videodev.h index 9d6fbde3d29c..1cc8c31b7988 100644 --- a/include/linux/videodev.h +++ b/include/linux/videodev.h @@ -3,7 +3,6 @@ #include <linux/compiler.h> #include <linux/types.h> -#include <linux/version.h> #define HAVE_V4L2 1 #include <linux/videodev2.h> @@ -29,7 +28,6 @@ struct video_device void (*release)(struct video_device *vfd); -#if 1 /* to be removed in 2.7.x */ /* obsolete -- fops->owner is used instead */ struct module *owner; /* dev->driver_data will be used instead some day. @@ -37,7 +35,6 @@ struct video_device * so the switch over will be transparent for you. * Or use {pci|usb}_{get|set}_drvdata() directly. */ void *priv; -#endif /* for videodev.c intenal usage -- please don't touch */ int users; /* video_exclusive_{open|close} ... */ diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h index acbfc525576d..f623a33b9abe 100644 --- a/include/linux/videodev2.h +++ b/include/linux/videodev2.h @@ -270,7 +270,6 @@ struct v4l2_timecode /* The above is based on SMPTE timecodes */ -#if 1 /* * M P E G C O M P R E S S I O N P A R A M E T E R S * @@ -357,7 +356,6 @@ struct v4l2_mpeg_compression { /* I don't expect the above being perfect yet ;) */ __u32 reserved_5[8]; }; -#endif struct v4l2_jpegcompression { @@ -871,10 +869,8 @@ struct v4l2_streamparm #define VIDIOC_ENUM_FMT _IOWR ('V', 2, struct v4l2_fmtdesc) #define VIDIOC_G_FMT _IOWR ('V', 4, struct v4l2_format) #define VIDIOC_S_FMT _IOWR ('V', 5, struct v4l2_format) -#if 1 /* experimental */ #define VIDIOC_G_MPEGCOMP _IOR ('V', 6, struct v4l2_mpeg_compression) #define VIDIOC_S_MPEGCOMP _IOW ('V', 7, struct v4l2_mpeg_compression) -#endif #define VIDIOC_REQBUFS _IOWR ('V', 8, struct v4l2_requestbuffers) #define VIDIOC_QUERYBUF _IOWR ('V', 9, struct v4l2_buffer) #define VIDIOC_G_FBUF _IOR ('V', 10, struct v4l2_framebuffer) diff --git a/include/linux/vmalloc.h b/include/linux/vmalloc.h index 6409d9cf5965..b244f69ef682 100644 --- a/include/linux/vmalloc.h +++ b/include/linux/vmalloc.h @@ -10,6 +10,14 @@ #define VM_MAP 0x00000004 /* vmap()ed pages */ /* bits [20..32] reserved for arch specific ioremap internals */ +/* + * Maximum alignment for ioremap() regions. + * Can be overriden by arch-specific value. + */ +#ifndef IOREMAP_MAX_ORDER +#define IOREMAP_MAX_ORDER (7 + PAGE_SHIFT) /* 128 pages */ +#endif + struct vm_struct { void *addr; unsigned long size; diff --git a/include/linux/wireless.h b/include/linux/wireless.h index ae485f9c916e..a555a0f7a7b4 100644 --- a/include/linux/wireless.h +++ b/include/linux/wireless.h @@ -1,7 +1,7 @@ /* * This file define a set of standard wireless extensions * - * Version : 18 12.3.05 + * Version : 19 18.3.05 * * Authors : Jean Tourrilhes - HPL - <jt@hpl.hp.com> * Copyright (c) 1997-2005 Jean Tourrilhes, All Rights Reserved. @@ -69,8 +69,6 @@ /***************************** INCLUDES *****************************/ -/* To minimise problems in user space, I might remove those headers - * at some point. Jean II */ #include <linux/types.h> /* for "caddr_t" et al */ #include <linux/socket.h> /* for "struct sockaddr" et al */ #include <linux/if.h> /* for IFNAMSIZ and co... */ @@ -82,7 +80,7 @@ * (there is some stuff that will be added in the future...) * I just plan to increment with each new version. */ -#define WIRELESS_EXT 18 +#define WIRELESS_EXT 19 /* * Changes : @@ -197,6 +195,15 @@ * related parameters (extensible up to 4096 parameter values) * - Add wireless events: IWEVGENIE, IWEVMICHAELMICFAILURE, * IWEVASSOCREQIE, IWEVASSOCRESPIE, IWEVPMKIDCAND + * + * V18 to V19 + * ---------- + * - Remove (struct iw_point *)->pointer from events and streams + * - Remove header includes to help user space + * - Increase IW_ENCODING_TOKEN_MAX from 32 to 64 + * - Add IW_QUAL_ALL_UPDATED and IW_QUAL_ALL_INVALID macros + * - Add explicit flag to tell stats are in dBm : IW_QUAL_DBM + * - Add IW_IOCTL_IDX() and IW_EVENT_IDX() macros */ /**************************** CONSTANTS ****************************/ @@ -322,6 +329,7 @@ /* The first and the last (range) */ #define SIOCIWFIRST 0x8B00 #define SIOCIWLAST SIOCIWLASTPRIV /* 0x8BFF */ +#define IW_IOCTL_IDX(cmd) ((cmd) - SIOCIWFIRST) /* Even : get (world access), odd : set (root access) */ #define IW_IS_SET(cmd) (!((cmd) & 0x1)) @@ -366,6 +374,7 @@ * (struct iw_pmkid_cand) */ #define IWEVFIRST 0x8C00 +#define IW_EVENT_IDX(cmd) ((cmd) - IWEVFIRST) /* ------------------------- PRIVATE INFO ------------------------- */ /* @@ -427,12 +436,15 @@ #define IW_MODE_MONITOR 6 /* Passive monitor (listen only) */ /* Statistics flags (bitmask in updated) */ -#define IW_QUAL_QUAL_UPDATED 0x1 /* Value was updated since last read */ -#define IW_QUAL_LEVEL_UPDATED 0x2 -#define IW_QUAL_NOISE_UPDATED 0x4 +#define IW_QUAL_QUAL_UPDATED 0x01 /* Value was updated since last read */ +#define IW_QUAL_LEVEL_UPDATED 0x02 +#define IW_QUAL_NOISE_UPDATED 0x04 +#define IW_QUAL_ALL_UPDATED 0x07 +#define IW_QUAL_DBM 0x08 /* Level + Noise are dBm */ #define IW_QUAL_QUAL_INVALID 0x10 /* Driver doesn't provide value */ #define IW_QUAL_LEVEL_INVALID 0x20 #define IW_QUAL_NOISE_INVALID 0x40 +#define IW_QUAL_ALL_INVALID 0x70 /* Frequency flags */ #define IW_FREQ_AUTO 0x00 /* Let the driver decides */ @@ -443,7 +455,7 @@ #define IW_MAX_ENCODING_SIZES 8 /* Maximum size of the encoding token in bytes */ -#define IW_ENCODING_TOKEN_MAX 32 /* 256 bits (for now) */ +#define IW_ENCODING_TOKEN_MAX 64 /* 512 bits (for now) */ /* Flags for encoding (along with the token) */ #define IW_ENCODE_INDEX 0x00FF /* Token index (if needed) */ @@ -1039,12 +1051,16 @@ struct iw_event #define IW_EV_CHAR_LEN (IW_EV_LCP_LEN + IFNAMSIZ) #define IW_EV_UINT_LEN (IW_EV_LCP_LEN + sizeof(__u32)) #define IW_EV_FREQ_LEN (IW_EV_LCP_LEN + sizeof(struct iw_freq)) -#define IW_EV_POINT_LEN (IW_EV_LCP_LEN + sizeof(struct iw_point)) #define IW_EV_PARAM_LEN (IW_EV_LCP_LEN + sizeof(struct iw_param)) #define IW_EV_ADDR_LEN (IW_EV_LCP_LEN + sizeof(struct sockaddr)) #define IW_EV_QUAL_LEN (IW_EV_LCP_LEN + sizeof(struct iw_quality)) -/* Note : in the case of iw_point, the extra data will come at the - * end of the event */ +/* iw_point events are special. First, the payload (extra data) come at + * the end of the event, so they are bigger than IW_EV_POINT_LEN. Second, + * we omit the pointer, so start at an offset. */ +#define IW_EV_POINT_OFF (((char *) &(((struct iw_point *) NULL)->length)) - \ + (char *) NULL) +#define IW_EV_POINT_LEN (IW_EV_LCP_LEN + sizeof(struct iw_point) - \ + IW_EV_POINT_OFF) #endif /* _LINUX_WIRELESS_H */ |