diff options
Diffstat (limited to 'include/linux')
36 files changed, 1638 insertions, 32 deletions
diff --git a/include/linux/bio.h b/include/linux/bio.h index 12737be58601..2a04eb54c0dd 100644 --- a/include/linux/bio.h +++ b/include/linux/bio.h @@ -590,6 +590,11 @@ static inline void bio_list_merge_head(struct bio_list *bl, bl->head = bl2->head; } +static inline struct bio *bio_list_peek(struct bio_list *bl) +{ + return bl->head; +} + static inline struct bio *bio_list_pop(struct bio_list *bl) { struct bio *bio = bl->head; diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 0b1a6cae9de1..8963d9149b5f 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -926,6 +926,7 @@ extern void blk_queue_alignment_offset(struct request_queue *q, unsigned int alignment); extern void blk_queue_io_min(struct request_queue *q, unsigned int min); extern void blk_queue_io_opt(struct request_queue *q, unsigned int opt); +extern void blk_set_default_limits(struct queue_limits *lim); extern int blk_stack_limits(struct queue_limits *t, struct queue_limits *b, sector_t offset); extern void disk_stack_limits(struct gendisk *disk, struct block_device *bdev, diff --git a/include/linux/c2port.h b/include/linux/c2port.h index 7b5a2388ba67..2a5cd867c365 100644 --- a/include/linux/c2port.h +++ b/include/linux/c2port.h @@ -10,6 +10,7 @@ */ #include <linux/device.h> +#include <linux/kmemcheck.h> #define C2PORT_NAME_LEN 32 @@ -20,8 +21,10 @@ /* Main struct */ struct c2port_ops; struct c2port_device { + kmemcheck_bitfield_begin(flags); unsigned int access:1; unsigned int flash_access:1; + kmemcheck_bitfield_end(flags); int id; char name[C2PORT_NAME_LEN]; diff --git a/include/linux/device.h b/include/linux/device.h index a4a7b10aaa48..ed4e39f2c423 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -114,6 +114,8 @@ extern int bus_unregister_notifier(struct bus_type *bus, #define BUS_NOTIFY_BOUND_DRIVER 0x00000003 /* driver bound to device */ #define BUS_NOTIFY_UNBIND_DRIVER 0x00000004 /* driver about to be unbound */ +#define BUS_NOTIFY_UNBOUND_DRIVER 0x00000005 /* driver is unbound + from the device */ extern struct kset *bus_get_kset(struct bus_type *bus); extern struct klist *bus_get_device_klist(struct bus_type *bus); @@ -192,6 +194,7 @@ struct class { struct kobject *dev_kobj; int (*dev_uevent)(struct device *dev, struct kobj_uevent_env *env); + char *(*nodename)(struct device *dev); void (*class_release)(struct class *class); void (*dev_release)(struct device *dev); @@ -287,6 +290,7 @@ struct device_type { const char *name; struct attribute_group **groups; int (*uevent)(struct device *dev, struct kobj_uevent_env *env); + char *(*nodename)(struct device *dev); void (*release)(struct device *dev); struct dev_pm_ops *pm; @@ -486,6 +490,7 @@ extern struct device *device_find_child(struct device *dev, void *data, extern int device_rename(struct device *dev, char *new_name); extern int device_move(struct device *dev, struct device *new_parent, enum dpm_order dpm_order); +extern const char *device_get_nodename(struct device *dev, const char **tmp); /* * Root device objects for grouping under /sys/devices diff --git a/include/linux/eisa.h b/include/linux/eisa.h index e61c0be2a459..6925249a5ac6 100644 --- a/include/linux/eisa.h +++ b/include/linux/eisa.h @@ -78,12 +78,12 @@ static inline void eisa_driver_unregister (struct eisa_driver *edrv) { } /* Mimics pci.h... */ static inline void *eisa_get_drvdata (struct eisa_device *edev) { - return edev->dev.driver_data; + return dev_get_drvdata(&edev->dev); } static inline void eisa_set_drvdata (struct eisa_device *edev, void *data) { - edev->dev.driver_data = data; + dev_set_drvdata(&edev->dev, data); } /* The EISA root device. There's rumours about machines with multiple diff --git a/include/linux/firewire.h b/include/linux/firewire.h new file mode 100644 index 000000000000..e584b7215e8b --- /dev/null +++ b/include/linux/firewire.h @@ -0,0 +1,358 @@ +#ifndef _LINUX_FIREWIRE_H +#define _LINUX_FIREWIRE_H + +#include <linux/completion.h> +#include <linux/device.h> +#include <linux/kernel.h> +#include <linux/kref.h> +#include <linux/list.h> +#include <linux/mutex.h> +#include <linux/spinlock.h> +#include <linux/sysfs.h> +#include <linux/timer.h> +#include <linux/types.h> +#include <linux/workqueue.h> + +#include <asm/atomic.h> +#include <asm/byteorder.h> + +#define fw_notify(s, args...) printk(KERN_NOTICE KBUILD_MODNAME ": " s, ## args) +#define fw_error(s, args...) printk(KERN_ERR KBUILD_MODNAME ": " s, ## args) + +static inline void fw_memcpy_from_be32(void *_dst, void *_src, size_t size) +{ + u32 *dst = _dst; + __be32 *src = _src; + int i; + + for (i = 0; i < size / 4; i++) + dst[i] = be32_to_cpu(src[i]); +} + +static inline void fw_memcpy_to_be32(void *_dst, void *_src, size_t size) +{ + fw_memcpy_from_be32(_dst, _src, size); +} +#define CSR_REGISTER_BASE 0xfffff0000000ULL + +/* register offsets are relative to CSR_REGISTER_BASE */ +#define CSR_STATE_CLEAR 0x0 +#define CSR_STATE_SET 0x4 +#define CSR_NODE_IDS 0x8 +#define CSR_RESET_START 0xc +#define CSR_SPLIT_TIMEOUT_HI 0x18 +#define CSR_SPLIT_TIMEOUT_LO 0x1c +#define CSR_CYCLE_TIME 0x200 +#define CSR_BUS_TIME 0x204 +#define CSR_BUSY_TIMEOUT 0x210 +#define CSR_BUS_MANAGER_ID 0x21c +#define CSR_BANDWIDTH_AVAILABLE 0x220 +#define CSR_CHANNELS_AVAILABLE 0x224 +#define CSR_CHANNELS_AVAILABLE_HI 0x224 +#define CSR_CHANNELS_AVAILABLE_LO 0x228 +#define CSR_BROADCAST_CHANNEL 0x234 +#define CSR_CONFIG_ROM 0x400 +#define CSR_CONFIG_ROM_END 0x800 +#define CSR_FCP_COMMAND 0xB00 +#define CSR_FCP_RESPONSE 0xD00 +#define CSR_FCP_END 0xF00 +#define CSR_TOPOLOGY_MAP 0x1000 +#define CSR_TOPOLOGY_MAP_END 0x1400 +#define CSR_SPEED_MAP 0x2000 +#define CSR_SPEED_MAP_END 0x3000 + +#define CSR_OFFSET 0x40 +#define CSR_LEAF 0x80 +#define CSR_DIRECTORY 0xc0 + +#define CSR_DESCRIPTOR 0x01 +#define CSR_VENDOR 0x03 +#define CSR_HARDWARE_VERSION 0x04 +#define CSR_NODE_CAPABILITIES 0x0c +#define CSR_UNIT 0x11 +#define CSR_SPECIFIER_ID 0x12 +#define CSR_VERSION 0x13 +#define CSR_DEPENDENT_INFO 0x14 +#define CSR_MODEL 0x17 +#define CSR_INSTANCE 0x18 +#define CSR_DIRECTORY_ID 0x20 + +struct fw_csr_iterator { + u32 *p; + u32 *end; +}; + +void fw_csr_iterator_init(struct fw_csr_iterator *ci, u32 *p); +int fw_csr_iterator_next(struct fw_csr_iterator *ci, int *key, int *value); + +extern struct bus_type fw_bus_type; + +struct fw_card_driver; +struct fw_node; + +struct fw_card { + const struct fw_card_driver *driver; + struct device *device; + struct kref kref; + struct completion done; + + int node_id; + int generation; + int current_tlabel; + u64 tlabel_mask; + struct list_head transaction_list; + struct timer_list flush_timer; + unsigned long reset_jiffies; + + unsigned long long guid; + unsigned max_receive; + int link_speed; + int config_rom_generation; + + spinlock_t lock; /* Take this lock when handling the lists in + * this struct. */ + struct fw_node *local_node; + struct fw_node *root_node; + struct fw_node *irm_node; + u8 color; /* must be u8 to match the definition in struct fw_node */ + int gap_count; + bool beta_repeaters_present; + + int index; + + struct list_head link; + + /* Work struct for BM duties. */ + struct delayed_work work; + int bm_retries; + int bm_generation; + + bool broadcast_channel_allocated; + u32 broadcast_channel; + u32 topology_map[(CSR_TOPOLOGY_MAP_END - CSR_TOPOLOGY_MAP) / 4]; +}; + +static inline struct fw_card *fw_card_get(struct fw_card *card) +{ + kref_get(&card->kref); + + return card; +} + +void fw_card_release(struct kref *kref); + +static inline void fw_card_put(struct fw_card *card) +{ + kref_put(&card->kref, fw_card_release); +} + +struct fw_attribute_group { + struct attribute_group *groups[2]; + struct attribute_group group; + struct attribute *attrs[12]; +}; + +enum fw_device_state { + FW_DEVICE_INITIALIZING, + FW_DEVICE_RUNNING, + FW_DEVICE_GONE, + FW_DEVICE_SHUTDOWN, +}; + +/* + * Note, fw_device.generation always has to be read before fw_device.node_id. + * Use SMP memory barriers to ensure this. Otherwise requests will be sent + * to an outdated node_id if the generation was updated in the meantime due + * to a bus reset. + * + * Likewise, fw-core will take care to update .node_id before .generation so + * that whenever fw_device.generation is current WRT the actual bus generation, + * fw_device.node_id is guaranteed to be current too. + * + * The same applies to fw_device.card->node_id vs. fw_device.generation. + * + * fw_device.config_rom and fw_device.config_rom_length may be accessed during + * the lifetime of any fw_unit belonging to the fw_device, before device_del() + * was called on the last fw_unit. Alternatively, they may be accessed while + * holding fw_device_rwsem. + */ +struct fw_device { + atomic_t state; + struct fw_node *node; + int node_id; + int generation; + unsigned max_speed; + struct fw_card *card; + struct device device; + + struct mutex client_list_mutex; + struct list_head client_list; + + u32 *config_rom; + size_t config_rom_length; + int config_rom_retries; + unsigned is_local:1; + unsigned max_rec:4; + unsigned cmc:1; + unsigned irmc:1; + unsigned bc_implemented:2; + + struct delayed_work work; + struct fw_attribute_group attribute_group; +}; + +static inline struct fw_device *fw_device(struct device *dev) +{ + return container_of(dev, struct fw_device, device); +} + +static inline int fw_device_is_shutdown(struct fw_device *device) +{ + return atomic_read(&device->state) == FW_DEVICE_SHUTDOWN; +} + +static inline struct fw_device *fw_device_get(struct fw_device *device) +{ + get_device(&device->device); + + return device; +} + +static inline void fw_device_put(struct fw_device *device) +{ + put_device(&device->device); +} + +int fw_device_enable_phys_dma(struct fw_device *device); + +/* + * fw_unit.directory must not be accessed after device_del(&fw_unit.device). + */ +struct fw_unit { + struct device device; + u32 *directory; + struct fw_attribute_group attribute_group; +}; + +static inline struct fw_unit *fw_unit(struct device *dev) +{ + return container_of(dev, struct fw_unit, device); +} + +static inline struct fw_unit *fw_unit_get(struct fw_unit *unit) +{ + get_device(&unit->device); + + return unit; +} + +static inline void fw_unit_put(struct fw_unit *unit) +{ + put_device(&unit->device); +} + +static inline struct fw_device *fw_parent_device(struct fw_unit *unit) +{ + return fw_device(unit->device.parent); +} + +struct ieee1394_device_id; + +struct fw_driver { + struct device_driver driver; + /* Called when the parent device sits through a bus reset. */ + void (*update)(struct fw_unit *unit); + const struct ieee1394_device_id *id_table; +}; + +struct fw_packet; +struct fw_request; + +typedef void (*fw_packet_callback_t)(struct fw_packet *packet, + struct fw_card *card, int status); +typedef void (*fw_transaction_callback_t)(struct fw_card *card, int rcode, + void *data, size_t length, + void *callback_data); +/* + * Important note: The callback must guarantee that either fw_send_response() + * or kfree() is called on the @request. + */ +typedef void (*fw_address_callback_t)(struct fw_card *card, + struct fw_request *request, + int tcode, int destination, int source, + int generation, int speed, + unsigned long long offset, + void *data, size_t length, + void *callback_data); + +struct fw_packet { + int speed; + int generation; + u32 header[4]; + size_t header_length; + void *payload; + size_t payload_length; + dma_addr_t payload_bus; + u32 timestamp; + + /* + * This callback is called when the packet transmission has + * completed; for successful transmission, the status code is + * the ack received from the destination, otherwise it's a + * negative errno: ENOMEM, ESTALE, ETIMEDOUT, ENODEV, EIO. + * The callback can be called from tasklet context and thus + * must never block. + */ + fw_packet_callback_t callback; + int ack; + struct list_head link; + void *driver_data; +}; + +struct fw_transaction { + int node_id; /* The generation is implied; it is always the current. */ + int tlabel; + int timestamp; + struct list_head link; + + struct fw_packet packet; + + /* + * The data passed to the callback is valid only during the + * callback. + */ + fw_transaction_callback_t callback; + void *callback_data; +}; + +struct fw_address_handler { + u64 offset; + size_t length; + fw_address_callback_t address_callback; + void *callback_data; + struct list_head link; +}; + +struct fw_address_region { + u64 start; + u64 end; +}; + +extern const struct fw_address_region fw_high_memory_region; + +int fw_core_add_address_handler(struct fw_address_handler *handler, + const struct fw_address_region *region); +void fw_core_remove_address_handler(struct fw_address_handler *handler); +void fw_send_response(struct fw_card *card, + struct fw_request *request, int rcode); +void fw_send_request(struct fw_card *card, struct fw_transaction *t, + int tcode, int destination_id, int generation, int speed, + unsigned long long offset, void *payload, size_t length, + fw_transaction_callback_t callback, void *callback_data); +int fw_cancel_transaction(struct fw_card *card, + struct fw_transaction *transaction); +int fw_run_transaction(struct fw_card *card, int tcode, int destination_id, + int generation, int speed, unsigned long long offset, + void *payload, size_t length); + +#endif /* _LINUX_FIREWIRE_H */ diff --git a/include/linux/firmware.h b/include/linux/firmware.h index c8ecf5b2a207..d31544628436 100644 --- a/include/linux/firmware.h +++ b/include/linux/firmware.h @@ -5,7 +5,6 @@ #include <linux/types.h> #include <linux/compiler.h> -#define FIRMWARE_NAME_MAX 30 #define FW_ACTION_NOHOTPLUG 0 #define FW_ACTION_HOTPLUG 1 diff --git a/include/linux/fs.h b/include/linux/fs.h index f5ae9f19b8a3..74a57938c880 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -1919,8 +1919,9 @@ extern void __init vfs_caches_init(unsigned long); extern struct kmem_cache *names_cachep; -#define __getname() kmem_cache_alloc(names_cachep, GFP_KERNEL) -#define __putname(name) kmem_cache_free(names_cachep, (void *)(name)) +#define __getname_gfp(gfp) kmem_cache_alloc(names_cachep, (gfp)) +#define __getname() __getname_gfp(GFP_KERNEL) +#define __putname(name) kmem_cache_free(names_cachep, (void *)(name)) #ifndef CONFIG_AUDITSYSCALL #define putname(name) __putname(name) #else diff --git a/include/linux/genhd.h b/include/linux/genhd.h index 7cbd38d363a2..45fc320a53c6 100644 --- a/include/linux/genhd.h +++ b/include/linux/genhd.h @@ -142,7 +142,7 @@ struct gendisk { * disks that can't be partitioned. */ char disk_name[DISK_NAME_LEN]; /* name of major driver */ - + char *(*nodename)(struct gendisk *gd); /* Array of pointers to partitions indexed by partno. * Protected with matching bdev lock but stat and other * non-critical accesses use RCU. Always access through diff --git a/include/linux/gfp.h b/include/linux/gfp.h index 412178afd423..cfdb35d71bca 100644 --- a/include/linux/gfp.h +++ b/include/linux/gfp.h @@ -53,7 +53,19 @@ struct vm_area_struct; #define __GFP_THISNODE ((__force gfp_t)0x40000u)/* No fallback, no policies */ #define __GFP_RECLAIMABLE ((__force gfp_t)0x80000u) /* Page is reclaimable */ -#define __GFP_BITS_SHIFT 21 /* Room for 21 __GFP_FOO bits */ +#ifdef CONFIG_KMEMCHECK +#define __GFP_NOTRACK ((__force gfp_t)0x200000u) /* Don't track with kmemcheck */ +#else +#define __GFP_NOTRACK ((__force gfp_t)0) +#endif + +/* + * This may seem redundant, but it's a way of annotating false positives vs. + * allocations that simply cannot be supported (e.g. page tables). + */ +#define __GFP_NOTRACK_FALSE_POSITIVE (__GFP_NOTRACK) + +#define __GFP_BITS_SHIFT 22 /* Room for 22 __GFP_FOO bits */ #define __GFP_BITS_MASK ((__force gfp_t)((1 << __GFP_BITS_SHIFT) - 1)) /* This equals 0, but use constants in case they ever change */ diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h index c41e812e9d5e..2721f07e9354 100644 --- a/include/linux/interrupt.h +++ b/include/linux/interrupt.h @@ -472,6 +472,20 @@ static inline void tasklet_hi_schedule(struct tasklet_struct *t) __tasklet_hi_schedule(t); } +extern void __tasklet_hi_schedule_first(struct tasklet_struct *t); + +/* + * This version avoids touching any other tasklets. Needed for kmemcheck + * in order not to take any page faults while enqueueing this tasklet; + * consider VERY carefully whether you really need this or + * tasklet_hi_schedule()... + */ +static inline void tasklet_hi_schedule_first(struct tasklet_struct *t) +{ + if (!test_and_set_bit(TASKLET_STATE_SCHED, &t->state)) + __tasklet_hi_schedule_first(t); +} + static inline void tasklet_disable_nosync(struct tasklet_struct *t) { diff --git a/include/linux/kernel.h b/include/linux/kernel.h index 883cd44ff765..c5a71c38a95f 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -97,12 +97,14 @@ extern const char linux_proc_banner[]; #define KERN_INFO "<6>" /* informational */ #define KERN_DEBUG "<7>" /* debug-level messages */ +/* Use the default kernel loglevel */ +#define KERN_DEFAULT "<d>" /* * Annotation for a "continued" line of log printout (only done after a * line that had no enclosing \n). Only to be used by core/arch code * during early bootup (a continued line is not SMP-safe otherwise). */ -#define KERN_CONT "" +#define KERN_CONT "<c>" extern int console_printk[]; @@ -406,7 +408,7 @@ static inline char *pack_hex_byte(char *buf, u8 byte) * * Use tracing_on/tracing_off when you want to quickly turn on or off * tracing. It simply enables or disables the recording of the trace events. - * This also corresponds to the user space debugfs/tracing/tracing_on + * This also corresponds to the user space /sys/kernel/debug/tracing/tracing_on * file, which gives a means for the kernel and userspace to interact. * Place a tracing_off() in the kernel where you want tracing to end. * From user space, examine the trace, and then echo 1 > tracing_on diff --git a/include/linux/kmemcheck.h b/include/linux/kmemcheck.h new file mode 100644 index 000000000000..47b39b7c7e84 --- /dev/null +++ b/include/linux/kmemcheck.h @@ -0,0 +1,153 @@ +#ifndef LINUX_KMEMCHECK_H +#define LINUX_KMEMCHECK_H + +#include <linux/mm_types.h> +#include <linux/types.h> + +#ifdef CONFIG_KMEMCHECK +extern int kmemcheck_enabled; + +/* The slab-related functions. */ +void kmemcheck_alloc_shadow(struct page *page, int order, gfp_t flags, int node); +void kmemcheck_free_shadow(struct page *page, int order); +void kmemcheck_slab_alloc(struct kmem_cache *s, gfp_t gfpflags, void *object, + size_t size); +void kmemcheck_slab_free(struct kmem_cache *s, void *object, size_t size); + +void kmemcheck_pagealloc_alloc(struct page *p, unsigned int order, + gfp_t gfpflags); + +void kmemcheck_show_pages(struct page *p, unsigned int n); +void kmemcheck_hide_pages(struct page *p, unsigned int n); + +bool kmemcheck_page_is_tracked(struct page *p); + +void kmemcheck_mark_unallocated(void *address, unsigned int n); +void kmemcheck_mark_uninitialized(void *address, unsigned int n); +void kmemcheck_mark_initialized(void *address, unsigned int n); +void kmemcheck_mark_freed(void *address, unsigned int n); + +void kmemcheck_mark_unallocated_pages(struct page *p, unsigned int n); +void kmemcheck_mark_uninitialized_pages(struct page *p, unsigned int n); +void kmemcheck_mark_initialized_pages(struct page *p, unsigned int n); + +int kmemcheck_show_addr(unsigned long address); +int kmemcheck_hide_addr(unsigned long address); + +#else +#define kmemcheck_enabled 0 + +static inline void +kmemcheck_alloc_shadow(struct page *page, int order, gfp_t flags, int node) +{ +} + +static inline void +kmemcheck_free_shadow(struct page *page, int order) +{ +} + +static inline void +kmemcheck_slab_alloc(struct kmem_cache *s, gfp_t gfpflags, void *object, + size_t size) +{ +} + +static inline void kmemcheck_slab_free(struct kmem_cache *s, void *object, + size_t size) +{ +} + +static inline void kmemcheck_pagealloc_alloc(struct page *p, + unsigned int order, gfp_t gfpflags) +{ +} + +static inline bool kmemcheck_page_is_tracked(struct page *p) +{ + return false; +} + +static inline void kmemcheck_mark_unallocated(void *address, unsigned int n) +{ +} + +static inline void kmemcheck_mark_uninitialized(void *address, unsigned int n) +{ +} + +static inline void kmemcheck_mark_initialized(void *address, unsigned int n) +{ +} + +static inline void kmemcheck_mark_freed(void *address, unsigned int n) +{ +} + +static inline void kmemcheck_mark_unallocated_pages(struct page *p, + unsigned int n) +{ +} + +static inline void kmemcheck_mark_uninitialized_pages(struct page *p, + unsigned int n) +{ +} + +static inline void kmemcheck_mark_initialized_pages(struct page *p, + unsigned int n) +{ +} + +#endif /* CONFIG_KMEMCHECK */ + +/* + * Bitfield annotations + * + * How to use: If you have a struct using bitfields, for example + * + * struct a { + * int x:8, y:8; + * }; + * + * then this should be rewritten as + * + * struct a { + * kmemcheck_bitfield_begin(flags); + * int x:8, y:8; + * kmemcheck_bitfield_end(flags); + * }; + * + * Now the "flags_begin" and "flags_end" members may be used to refer to the + * beginning and end, respectively, of the bitfield (and things like + * &x.flags_begin is allowed). As soon as the struct is allocated, the bit- + * fields should be annotated: + * + * struct a *a = kmalloc(sizeof(struct a), GFP_KERNEL); + * kmemcheck_annotate_bitfield(a, flags); + * + * Note: We provide the same definitions for both kmemcheck and non- + * kmemcheck kernels. This makes it harder to introduce accidental errors. It + * is also allowed to pass NULL pointers to kmemcheck_annotate_bitfield(). + */ +#define kmemcheck_bitfield_begin(name) \ + int name##_begin[0]; + +#define kmemcheck_bitfield_end(name) \ + int name##_end[0]; + +#define kmemcheck_annotate_bitfield(ptr, name) \ + do if (ptr) { \ + int _n = (long) &((ptr)->name##_end) \ + - (long) &((ptr)->name##_begin); \ + BUILD_BUG_ON(_n < 0); \ + \ + kmemcheck_mark_initialized(&((ptr)->name##_begin), _n); \ + } while (0) + +#define kmemcheck_annotate_variable(var) \ + do { \ + kmemcheck_mark_initialized(&(var), sizeof(var)); \ + } while (0) \ + +#endif /* LINUX_KMEMCHECK_H */ diff --git a/include/linux/mg_disk.h b/include/linux/mg_disk.h new file mode 100644 index 000000000000..e11f4d9f1c2e --- /dev/null +++ b/include/linux/mg_disk.h @@ -0,0 +1,45 @@ +/* + * include/linux/mg_disk.c + * + * Private data for mflash platform driver + * + * (c) 2008 mGine Co.,LTD + * (c) 2008 unsik Kim <donari75@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __MG_DISK_H__ +#define __MG_DISK_H__ + +/* name for platform device */ +#define MG_DEV_NAME "mg_disk" + +/* names of GPIO resource */ +#define MG_RST_PIN "mg_rst" +/* except MG_BOOT_DEV, reset-out pin should be assigned */ +#define MG_RSTOUT_PIN "mg_rstout" + +/* device attribution */ +/* use mflash as boot device */ +#define MG_BOOT_DEV (1 << 0) +/* use mflash as storage device */ +#define MG_STORAGE_DEV (1 << 1) +/* same as MG_STORAGE_DEV, but bootloader already done reset sequence */ +#define MG_STORAGE_DEV_SKIP_RST (1 << 2) + +/* private driver data */ +struct mg_drv_data { + /* disk resource */ + u32 use_polling; + + /* device attribution */ + u32 dev_attr; + + /* internally used */ + void *host; +}; + +#endif diff --git a/include/linux/miscdevice.h b/include/linux/miscdevice.h index beb6ec99cfef..052117744629 100644 --- a/include/linux/miscdevice.h +++ b/include/linux/miscdevice.h @@ -41,6 +41,7 @@ struct miscdevice { struct list_head list; struct device *parent; struct device *this_device; + const char *devnode; }; extern int misc_register(struct miscdevice * misc); diff --git a/include/linux/mm_types.h b/include/linux/mm_types.h index f4408106fcbc..7acc8439d9b3 100644 --- a/include/linux/mm_types.h +++ b/include/linux/mm_types.h @@ -98,6 +98,14 @@ struct page { #ifdef CONFIG_WANT_PAGE_DEBUG_FLAGS unsigned long debug_flags; /* Use atomic bitops on this */ #endif + +#ifdef CONFIG_KMEMCHECK + /* + * kmemcheck wants to track the status of each byte in a page; this + * is a pointer to such a status block. NULL if not tracked. + */ + void *shadow; +#endif }; /* diff --git a/include/linux/nls.h b/include/linux/nls.h index 52b1a76c1b43..d47beef08dfd 100644 --- a/include/linux/nls.h +++ b/include/linux/nls.h @@ -3,8 +3,23 @@ #include <linux/init.h> -/* unicode character */ -typedef __u16 wchar_t; +/* Unicode has changed over the years. Unicode code points no longer + * fit into 16 bits; as of Unicode 5 valid code points range from 0 + * to 0x10ffff (17 planes, where each plane holds 65536 code points). + * + * The original decision to represent Unicode characters as 16-bit + * wchar_t values is now outdated. But plane 0 still includes the + * most commonly used characters, so we will retain it. The newer + * 32-bit unicode_t type can be used when it is necessary to + * represent the full Unicode character set. + */ + +/* Plane-0 Unicode character */ +typedef u16 wchar_t; +#define MAX_WCHAR_T 0xffff + +/* Arbitrary Unicode character */ +typedef u32 unicode_t; struct nls_table { const char *charset; @@ -21,6 +36,13 @@ struct nls_table { /* this value hold the maximum octet of charset */ #define NLS_MAX_CHARSET_SIZE 6 /* for UTF-8 */ +/* Byte order for UTF-16 strings */ +enum utf16_endian { + UTF16_HOST_ENDIAN, + UTF16_LITTLE_ENDIAN, + UTF16_BIG_ENDIAN +}; + /* nls.c */ extern int register_nls(struct nls_table *); extern int unregister_nls(struct nls_table *); @@ -28,10 +50,11 @@ extern struct nls_table *load_nls(char *); extern void unload_nls(struct nls_table *); extern struct nls_table *load_nls_default(void); -extern int utf8_mbtowc(wchar_t *, const __u8 *, int); -extern int utf8_mbstowcs(wchar_t *, const __u8 *, int); -extern int utf8_wctomb(__u8 *, wchar_t, int); -extern int utf8_wcstombs(__u8 *, const wchar_t *, int); +extern int utf8_to_utf32(const u8 *s, int len, unicode_t *pu); +extern int utf32_to_utf8(unicode_t u, u8 *s, int maxlen); +extern int utf8s_to_utf16s(const u8 *s, int len, wchar_t *pwcs); +extern int utf16s_to_utf8s(const wchar_t *pwcs, int len, + enum utf16_endian endian, u8 *s, int maxlen); static inline unsigned char nls_tolower(struct nls_table *t, unsigned char c) { diff --git a/include/linux/pci.h b/include/linux/pci.h index 72698d89e767..8e366bb0705f 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -124,6 +124,14 @@ typedef int __bitwise pci_power_t; #define PCI_UNKNOWN ((pci_power_t __force) 5) #define PCI_POWER_ERROR ((pci_power_t __force) -1) +/* Remember to update this when the list above changes! */ +extern const char *pci_power_names[]; + +static inline const char *pci_power_name(pci_power_t state) +{ + return pci_power_names[1 + (int) state]; +} + #define PCI_PM_D2_DELAY 200 #define PCI_PM_D3_WAIT 10 #define PCI_PM_BUS_WAIT 50 diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index aa01d38c9971..a3b000365795 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -104,6 +104,7 @@ #define PCI_CLASS_SERIAL_USB_UHCI 0x0c0300 #define PCI_CLASS_SERIAL_USB_OHCI 0x0c0310 #define PCI_CLASS_SERIAL_USB_EHCI 0x0c0320 +#define PCI_CLASS_SERIAL_USB_XHCI 0x0c0330 #define PCI_CLASS_SERIAL_FIBER 0x0c04 #define PCI_CLASS_SERIAL_SMBUS 0x0c05 diff --git a/include/linux/platform_device.h b/include/linux/platform_device.h index b67bb5d7b221..8dc5123b6305 100644 --- a/include/linux/platform_device.h +++ b/include/linux/platform_device.h @@ -36,8 +36,8 @@ extern struct device platform_bus; extern struct resource *platform_get_resource(struct platform_device *, unsigned int, unsigned int); extern int platform_get_irq(struct platform_device *, unsigned int); -extern struct resource *platform_get_resource_byname(struct platform_device *, unsigned int, char *); -extern int platform_get_irq_byname(struct platform_device *, char *); +extern struct resource *platform_get_resource_byname(struct platform_device *, unsigned int, const char *); +extern int platform_get_irq_byname(struct platform_device *, const char *); extern int platform_add_devices(struct platform_device **, int); extern struct platform_device *platform_device_register_simple(const char *, int id, diff --git a/include/linux/ring_buffer.h b/include/linux/ring_buffer.h index 8670f1575fe1..29f8599e6bea 100644 --- a/include/linux/ring_buffer.h +++ b/include/linux/ring_buffer.h @@ -1,6 +1,7 @@ #ifndef _LINUX_RING_BUFFER_H #define _LINUX_RING_BUFFER_H +#include <linux/kmemcheck.h> #include <linux/mm.h> #include <linux/seq_file.h> @@ -11,7 +12,10 @@ struct ring_buffer_iter; * Don't refer to this struct directly, use functions below. */ struct ring_buffer_event { + kmemcheck_bitfield_begin(bitfield); u32 type_len:5, time_delta:27; + kmemcheck_bitfield_end(bitfield); + u32 array[]; }; diff --git a/include/linux/sched.h b/include/linux/sched.h index 1bc6fae0c135..02042e7f2196 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -674,7 +674,7 @@ struct user_struct { struct task_group *tg; #ifdef CONFIG_SYSFS struct kobject kobj; - struct work_struct work; + struct delayed_work work; #endif #endif diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index fa51293f2708..63ef24bc01d0 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -15,6 +15,7 @@ #define _LINUX_SKBUFF_H #include <linux/kernel.h> +#include <linux/kmemcheck.h> #include <linux/compiler.h> #include <linux/time.h> #include <linux/cache.h> @@ -343,6 +344,7 @@ struct sk_buff { }; }; __u32 priority; + kmemcheck_bitfield_begin(flags1); __u8 local_df:1, cloned:1, ip_summed:2, @@ -353,6 +355,7 @@ struct sk_buff { ipvs_property:1, peeked:1, nf_trace:1; + kmemcheck_bitfield_end(flags1); __be16 protocol; void (*destructor)(struct sk_buff *skb); @@ -372,12 +375,16 @@ struct sk_buff { __u16 tc_verd; /* traffic control verdict */ #endif #endif + + kmemcheck_bitfield_begin(flags2); #ifdef CONFIG_IPV6_NDISC_NODETYPE __u8 ndisc_nodetype:2; #endif #if defined(CONFIG_MAC80211) || defined(CONFIG_MAC80211_MODULE) __u8 do_not_encrypt:1; #endif + kmemcheck_bitfield_end(flags2); + /* 0/13/14 bit hole */ #ifdef CONFIG_NET_DMA diff --git a/include/linux/slab.h b/include/linux/slab.h index 219b8fb4651d..2da8372519f5 100644 --- a/include/linux/slab.h +++ b/include/linux/slab.h @@ -64,6 +64,13 @@ #define SLAB_NOLEAKTRACE 0x00800000UL /* Avoid kmemleak tracing */ +/* Don't track use of uninitialized memory */ +#ifdef CONFIG_KMEMCHECK +# define SLAB_NOTRACK 0x01000000UL +#else +# define SLAB_NOTRACK 0x00000000UL +#endif + /* The following flags affect the page allocator grouping pages by mobility */ #define SLAB_RECLAIM_ACCOUNT 0x00020000UL /* Objects are reclaimable */ #define SLAB_TEMPORARY SLAB_RECLAIM_ACCOUNT /* Objects are short-lived */ diff --git a/include/linux/slab_def.h b/include/linux/slab_def.h index 713f841ecaa9..850d057500de 100644 --- a/include/linux/slab_def.h +++ b/include/linux/slab_def.h @@ -16,6 +16,87 @@ #include <linux/compiler.h> #include <linux/kmemtrace.h> +/* + * struct kmem_cache + * + * manages a cache. + */ + +struct kmem_cache { +/* 1) per-cpu data, touched during every alloc/free */ + struct array_cache *array[NR_CPUS]; +/* 2) Cache tunables. Protected by cache_chain_mutex */ + unsigned int batchcount; + unsigned int limit; + unsigned int shared; + + unsigned int buffer_size; + u32 reciprocal_buffer_size; +/* 3) touched by every alloc & free from the backend */ + + unsigned int flags; /* constant flags */ + unsigned int num; /* # of objs per slab */ + +/* 4) cache_grow/shrink */ + /* order of pgs per slab (2^n) */ + unsigned int gfporder; + + /* force GFP flags, e.g. GFP_DMA */ + gfp_t gfpflags; + + size_t colour; /* cache colouring range */ + unsigned int colour_off; /* colour offset */ + struct kmem_cache *slabp_cache; + unsigned int slab_size; + unsigned int dflags; /* dynamic flags */ + + /* constructor func */ + void (*ctor)(void *obj); + +/* 5) cache creation/removal */ + const char *name; + struct list_head next; + +/* 6) statistics */ +#ifdef CONFIG_DEBUG_SLAB + unsigned long num_active; + unsigned long num_allocations; + unsigned long high_mark; + unsigned long grown; + unsigned long reaped; + unsigned long errors; + unsigned long max_freeable; + unsigned long node_allocs; + unsigned long node_frees; + unsigned long node_overflow; + atomic_t allochit; + atomic_t allocmiss; + atomic_t freehit; + atomic_t freemiss; + + /* + * If debugging is enabled, then the allocator can add additional + * fields and/or padding to every object. buffer_size contains the total + * object size including these internal fields, the following two + * variables contain the offset to the user object and its size. + */ + int obj_offset; + int obj_size; +#endif /* CONFIG_DEBUG_SLAB */ + + /* + * We put nodelists[] at the end of kmem_cache, because we want to size + * this array to nr_node_ids slots instead of MAX_NUMNODES + * (see kmem_cache_init()) + * We still use [MAX_NUMNODES] and not [1] or [0] because cache_cache + * is statically defined, so we reserve the max number of nodes. + */ + struct kmem_list3 *nodelists[MAX_NUMNODES]; + /* + * Do not add fields after nodelists[] + */ +}; + /* Size description struct for general caches. */ struct cache_sizes { size_t cs_size; diff --git a/include/linux/stacktrace.h b/include/linux/stacktrace.h index 1a8cecc4f38c..51efbef38fb0 100644 --- a/include/linux/stacktrace.h +++ b/include/linux/stacktrace.h @@ -4,6 +4,8 @@ struct task_struct; #ifdef CONFIG_STACKTRACE +struct task_struct; + struct stack_trace { unsigned int nr_entries, max_entries; unsigned long *entries; @@ -11,6 +13,7 @@ struct stack_trace { }; extern void save_stack_trace(struct stack_trace *trace); +extern void save_stack_trace_bp(struct stack_trace *trace, unsigned long bp); extern void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace); diff --git a/include/linux/tracepoint.h b/include/linux/tracepoint.h index 14df7e635d43..b9dc4ca0246f 100644 --- a/include/linux/tracepoint.h +++ b/include/linux/tracepoint.h @@ -198,7 +198,7 @@ static inline void tracepoint_synchronize_unregister(void) * * This is how the trace record is structured and will * * be saved into the ring buffer. These are the fields * * that will be exposed to user-space in - * * /debug/tracing/events/<*>/format. + * * /sys/kernel/debug/tracing/events/<*>/format. * * * * The declared 'local variable' is called '__entry' * * @@ -258,7 +258,7 @@ static inline void tracepoint_synchronize_unregister(void) * tracepoint callback (this is used by programmatic plugins and * can also by used by generic instrumentation like SystemTap), and * it is also used to expose a structured trace record in - * /debug/tracing/events/. + * /sys/kernel/debug/tracing/events/. */ #define TRACE_EVENT(name, proto, args, struct, assign, print) \ diff --git a/include/linux/usb.h b/include/linux/usb.h index 3aa2cd1f8d08..84929e914034 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -36,6 +36,7 @@ struct wusb_dev; * - configs have one (often) or more interfaces; * - interfaces have one (usually) or more settings; * - each interface setting has zero or (usually) more endpoints. + * - a SuperSpeed endpoint has a companion descriptor * * And there might be other descriptors mixed in with those. * @@ -44,6 +45,19 @@ struct wusb_dev; struct ep_device; +/* For SS devices */ +/** + * struct usb_host_ss_ep_comp - Valid for SuperSpeed devices only + * @desc: endpoint companion descriptor, wMaxPacketSize in native byteorder + * @extra: descriptors following this endpoint companion descriptor + * @extralen: how many bytes of "extra" are valid + */ +struct usb_host_ss_ep_comp { + struct usb_ss_ep_comp_descriptor desc; + unsigned char *extra; /* Extra descriptors */ + int extralen; +}; + /** * struct usb_host_endpoint - host-side endpoint descriptor and queue * @desc: descriptor for this endpoint, wMaxPacketSize in native byteorder @@ -51,6 +65,7 @@ struct ep_device; * @hcpriv: for use by HCD; typically holds hardware dma queue head (QH) * with one or more transfer descriptors (TDs) per urb * @ep_dev: ep_device for sysfs info + * @ss_ep_comp: companion descriptor information for this endpoint * @extra: descriptors following this endpoint in the configuration * @extralen: how many bytes of "extra" are valid * @enabled: URBs may be submitted to this endpoint @@ -63,6 +78,7 @@ struct usb_host_endpoint { struct list_head urb_list; void *hcpriv; struct ep_device *ep_dev; /* For sysfs info */ + struct usb_host_ss_ep_comp *ss_ep_comp; /* For SS devices */ unsigned char *extra; /* Extra descriptors */ int extralen; @@ -336,7 +352,6 @@ struct usb_bus { #ifdef CONFIG_USB_DEVICEFS struct dentry *usbfs_dentry; /* usbfs dentry entry for the bus */ #endif - struct device *dev; /* device for this bus */ #if defined(CONFIG_USB_MON) || defined(CONFIG_USB_MON_MODULE) struct mon_bus *mon_bus; /* non-null when associated */ @@ -363,6 +378,7 @@ struct usb_tt; * struct usb_device - kernel's representation of a USB device * @devnum: device number; address on a USB bus * @devpath: device ID string for use in messages (e.g., /port/...) + * @route: tree topology hex string for use with xHCI * @state: device state: configured, not attached, etc. * @speed: device speed: high/full/low (or error) * @tt: Transaction Translator info; used with low/full speed dev, highspeed hub @@ -420,6 +436,7 @@ struct usb_tt; * @skip_sys_resume: skip the next system resume * @wusb_dev: if this is a Wireless USB device, link to the WUSB * specific data for the device. + * @slot_id: Slot ID assigned by xHCI * * Notes: * Usbcore drivers should not set usbdev->state directly. Instead use @@ -428,6 +445,7 @@ struct usb_tt; struct usb_device { int devnum; char devpath [16]; + u32 route; enum usb_device_state state; enum usb_device_speed speed; @@ -503,6 +521,7 @@ struct usb_device { unsigned skip_sys_resume:1; #endif struct wusb_dev *wusb_dev; + int slot_id; }; #define to_usb_device(d) container_of(d, struct usb_device, dev) @@ -869,6 +888,8 @@ struct usb_driver { * struct usb_device_driver - identifies USB device driver to usbcore * @name: The driver name should be unique among USB drivers, * and should normally be the same as the module name. + * @nodename: Callback to provide a naming hint for a possible + * device node to create. * @probe: Called to see if the driver is willing to manage a particular * device. If it is, probe returns zero and uses dev_set_drvdata() * to associate driver-specific data with the device. If unwilling @@ -912,6 +933,7 @@ extern struct bus_type usb_bus_type; */ struct usb_class_driver { char *name; + char *(*nodename)(struct device *dev); const struct file_operations *fops; int minor_base; }; @@ -1041,7 +1063,9 @@ typedef void (*usb_complete_t)(struct urb *); * @setup_dma: For control transfers with URB_NO_SETUP_DMA_MAP set, the * device driver has provided this DMA address for the setup packet. * The host controller driver should use this in preference to - * setup_packet. + * setup_packet, but the HCD may chose to ignore the address if it must + * copy the setup packet into internal structures. Therefore, setup_packet + * must always point to a valid buffer. * @start_frame: Returns the initial frame for isochronous transfers. * @number_of_packets: Lists the number of ISO transfer buffers. * @interval: Specifies the polling interval for interrupt or isochronous @@ -1177,6 +1201,8 @@ struct urb { unsigned int transfer_flags; /* (in) URB_SHORT_NOT_OK | ...*/ void *transfer_buffer; /* (in) associated data buffer */ dma_addr_t transfer_dma; /* (in) dma addr for transfer_buffer */ + struct usb_sg_request *sg; /* (in) scatter gather buffer list */ + int num_sgs; /* (in) number of entries in the sg list */ u32 transfer_buffer_length; /* (in) data buffer length */ u32 actual_length; /* (return) actual transfer length */ unsigned char *setup_packet; /* (in) setup packet (control only) */ @@ -1422,8 +1448,8 @@ struct usb_sg_request { int status; size_t bytes; - /* - * members below are private: to usbcore, + /* private: + * members below are private to usbcore, * and are not provided for driver access! */ spinlock_t lock; @@ -1558,6 +1584,9 @@ extern void usb_unregister_notify(struct notifier_block *nb); #define err(format, arg...) printk(KERN_ERR KBUILD_MODNAME ": " \ format "\n" , ## arg) +/* debugfs stuff */ +extern struct dentry *usb_debug_root; + #endif /* __KERNEL__ */ #endif diff --git a/include/linux/usb/audio.h b/include/linux/usb/audio.h index 8cb025fef634..b5744bc218ab 100644 --- a/include/linux/usb/audio.h +++ b/include/linux/usb/audio.h @@ -24,10 +24,75 @@ #define USB_SUBCLASS_AUDIOCONTROL 0x01 #define USB_SUBCLASS_AUDIOSTREAMING 0x02 #define USB_SUBCLASS_MIDISTREAMING 0x03 +#define USB_SUBCLASS_VENDOR_SPEC 0xff +/* A.5 Audio Class-Specific AC interface Descriptor Subtypes*/ +#define HEADER 0x01 +#define INPUT_TERMINAL 0x02 +#define OUTPUT_TERMINAL 0x03 +#define MIXER_UNIT 0x04 +#define SELECTOR_UNIT 0x05 +#define FEATURE_UNIT 0x06 +#define PROCESSING_UNIT 0x07 +#define EXTENSION_UNIT 0x08 + +#define AS_GENERAL 0x01 +#define FORMAT_TYPE 0x02 +#define FORMAT_SPECIFIC 0x03 + +#define EP_GENERAL 0x01 + +#define MS_GENERAL 0x01 +#define MIDI_IN_JACK 0x02 +#define MIDI_OUT_JACK 0x03 + +/* endpoint attributes */ +#define EP_ATTR_MASK 0x0c +#define EP_ATTR_ASYNC 0x04 +#define EP_ATTR_ADAPTIVE 0x08 +#define EP_ATTR_SYNC 0x0c + +/* cs endpoint attributes */ +#define EP_CS_ATTR_SAMPLE_RATE 0x01 +#define EP_CS_ATTR_PITCH_CONTROL 0x02 +#define EP_CS_ATTR_FILL_MAX 0x80 + +/* Audio Class specific Request Codes */ +#define USB_AUDIO_SET_INTF 0x21 +#define USB_AUDIO_SET_ENDPOINT 0x22 +#define USB_AUDIO_GET_INTF 0xa1 +#define USB_AUDIO_GET_ENDPOINT 0xa2 + +#define SET_ 0x00 +#define GET_ 0x80 + +#define _CUR 0x1 +#define _MIN 0x2 +#define _MAX 0x3 +#define _RES 0x4 +#define _MEM 0x5 + +#define SET_CUR (SET_ | _CUR) +#define GET_CUR (GET_ | _CUR) +#define SET_MIN (SET_ | _MIN) +#define GET_MIN (GET_ | _MIN) +#define SET_MAX (SET_ | _MAX) +#define GET_MAX (GET_ | _MAX) +#define SET_RES (SET_ | _RES) +#define GET_RES (GET_ | _RES) +#define SET_MEM (SET_ | _MEM) +#define GET_MEM (GET_ | _MEM) + +#define GET_STAT 0xff + +#define USB_AC_TERMINAL_UNDEFINED 0x100 +#define USB_AC_TERMINAL_STREAMING 0x101 +#define USB_AC_TERMINAL_VENDOR_SPEC 0x1FF + +/* Terminal Control Selectors */ /* 4.3.2 Class-Specific AC Interface Descriptor */ struct usb_ac_header_descriptor { - __u8 bLength; /* 8+n */ + __u8 bLength; /* 8 + n */ __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */ __u8 bDescriptorSubtype; /* USB_MS_HEADER */ __le16 bcdADC; /* 0x0100 */ @@ -36,7 +101,7 @@ struct usb_ac_header_descriptor { __u8 baInterfaceNr[]; /* [n] */ } __attribute__ ((packed)); -#define USB_DT_AC_HEADER_SIZE(n) (8+(n)) +#define USB_DT_AC_HEADER_SIZE(n) (8 + (n)) /* As above, but more useful for defining your own descriptors: */ #define DECLARE_USB_AC_HEADER_DESCRIPTOR(n) \ @@ -50,4 +115,200 @@ struct usb_ac_header_descriptor_##n { \ __u8 baInterfaceNr[n]; \ } __attribute__ ((packed)) +/* 4.3.2.1 Input Terminal Descriptor */ +struct usb_input_terminal_descriptor { + __u8 bLength; /* in bytes: 12 */ + __u8 bDescriptorType; /* CS_INTERFACE descriptor type */ + __u8 bDescriptorSubtype; /* INPUT_TERMINAL descriptor subtype */ + __u8 bTerminalID; /* Constant uniquely terminal ID */ + __le16 wTerminalType; /* USB Audio Terminal Types */ + __u8 bAssocTerminal; /* ID of the Output Terminal associated */ + __u8 bNrChannels; /* Number of logical output channels */ + __le16 wChannelConfig; + __u8 iChannelNames; + __u8 iTerminal; +} __attribute__ ((packed)); + +#define USB_DT_AC_INPUT_TERMINAL_SIZE 12 + +#define USB_AC_INPUT_TERMINAL_UNDEFINED 0x200 +#define USB_AC_INPUT_TERMINAL_MICROPHONE 0x201 +#define USB_AC_INPUT_TERMINAL_DESKTOP_MICROPHONE 0x202 +#define USB_AC_INPUT_TERMINAL_PERSONAL_MICROPHONE 0x203 +#define USB_AC_INPUT_TERMINAL_OMNI_DIR_MICROPHONE 0x204 +#define USB_AC_INPUT_TERMINAL_MICROPHONE_ARRAY 0x205 +#define USB_AC_INPUT_TERMINAL_PROC_MICROPHONE_ARRAY 0x206 + +/* 4.3.2.2 Output Terminal Descriptor */ +struct usb_output_terminal_descriptor { + __u8 bLength; /* in bytes: 9 */ + __u8 bDescriptorType; /* CS_INTERFACE descriptor type */ + __u8 bDescriptorSubtype; /* OUTPUT_TERMINAL descriptor subtype */ + __u8 bTerminalID; /* Constant uniquely terminal ID */ + __le16 wTerminalType; /* USB Audio Terminal Types */ + __u8 bAssocTerminal; /* ID of the Input Terminal associated */ + __u8 bSourceID; /* ID of the connected Unit or Terminal*/ + __u8 iTerminal; +} __attribute__ ((packed)); + +#define USB_DT_AC_OUTPUT_TERMINAL_SIZE 9 + +#define USB_AC_OUTPUT_TERMINAL_UNDEFINED 0x300 +#define USB_AC_OUTPUT_TERMINAL_SPEAKER 0x301 +#define USB_AC_OUTPUT_TERMINAL_HEADPHONES 0x302 +#define USB_AC_OUTPUT_TERMINAL_HEAD_MOUNTED_DISPLAY_AUDIO 0x303 +#define USB_AC_OUTPUT_TERMINAL_DESKTOP_SPEAKER 0x304 +#define USB_AC_OUTPUT_TERMINAL_ROOM_SPEAKER 0x305 +#define USB_AC_OUTPUT_TERMINAL_COMMUNICATION_SPEAKER 0x306 +#define USB_AC_OUTPUT_TERMINAL_LOW_FREQ_EFFECTS_SPEAKER 0x307 + +/* Set bControlSize = 2 as default setting */ +#define USB_DT_AC_FEATURE_UNIT_SIZE(ch) (7 + ((ch) + 1) * 2) + +/* As above, but more useful for defining your own descriptors: */ +#define DECLARE_USB_AC_FEATURE_UNIT_DESCRIPTOR(ch) \ +struct usb_ac_feature_unit_descriptor_##ch { \ + __u8 bLength; \ + __u8 bDescriptorType; \ + __u8 bDescriptorSubtype; \ + __u8 bUnitID; \ + __u8 bSourceID; \ + __u8 bControlSize; \ + __le16 bmaControls[ch + 1]; \ + __u8 iFeature; \ +} __attribute__ ((packed)) + +/* 4.5.2 Class-Specific AS Interface Descriptor */ +struct usb_as_header_descriptor { + __u8 bLength; /* in bytes: 7 */ + __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */ + __u8 bDescriptorSubtype; /* AS_GENERAL */ + __u8 bTerminalLink; /* Terminal ID of connected Terminal */ + __u8 bDelay; /* Delay introduced by the data path */ + __le16 wFormatTag; /* The Audio Data Format */ +} __attribute__ ((packed)); + +#define USB_DT_AS_HEADER_SIZE 7 + +#define USB_AS_AUDIO_FORMAT_TYPE_I_UNDEFINED 0x0 +#define USB_AS_AUDIO_FORMAT_TYPE_I_PCM 0x1 +#define USB_AS_AUDIO_FORMAT_TYPE_I_PCM8 0x2 +#define USB_AS_AUDIO_FORMAT_TYPE_I_IEEE_FLOAT 0x3 +#define USB_AS_AUDIO_FORMAT_TYPE_I_ALAW 0x4 +#define USB_AS_AUDIO_FORMAT_TYPE_I_MULAW 0x5 + +struct usb_as_format_type_i_continuous_descriptor { + __u8 bLength; /* in bytes: 8 + (ns * 3) */ + __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */ + __u8 bDescriptorSubtype; /* FORMAT_TYPE */ + __u8 bFormatType; /* FORMAT_TYPE_1 */ + __u8 bNrChannels; /* physical channels in the stream */ + __u8 bSubframeSize; /* */ + __u8 bBitResolution; + __u8 bSamFreqType; + __u8 tLowerSamFreq[3]; + __u8 tUpperSamFreq[3]; +} __attribute__ ((packed)); + +#define USB_AS_FORMAT_TYPE_I_CONTINUOUS_DESC_SIZE 14 + +struct usb_as_formate_type_i_discrete_descriptor { + __u8 bLength; /* in bytes: 8 + (ns * 3) */ + __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */ + __u8 bDescriptorSubtype; /* FORMAT_TYPE */ + __u8 bFormatType; /* FORMAT_TYPE_1 */ + __u8 bNrChannels; /* physical channels in the stream */ + __u8 bSubframeSize; /* */ + __u8 bBitResolution; + __u8 bSamFreqType; + __u8 tSamFreq[][3]; +} __attribute__ ((packed)); + +#define DECLARE_USB_AS_FORMAT_TYPE_I_DISCRETE_DESC(n) \ +struct usb_as_formate_type_i_discrete_descriptor_##n { \ + __u8 bLength; \ + __u8 bDescriptorType; \ + __u8 bDescriptorSubtype; \ + __u8 bFormatType; \ + __u8 bNrChannels; \ + __u8 bSubframeSize; \ + __u8 bBitResolution; \ + __u8 bSamFreqType; \ + __u8 tSamFreq[n][3]; \ +} __attribute__ ((packed)) + +#define USB_AS_FORMAT_TYPE_I_DISCRETE_DESC_SIZE(n) (8 + (n * 3)) + +#define USB_AS_FORMAT_TYPE_UNDEFINED 0x0 +#define USB_AS_FORMAT_TYPE_I 0x1 +#define USB_AS_FORMAT_TYPE_II 0x2 +#define USB_AS_FORMAT_TYPE_III 0x3 + +#define USB_AS_ENDPOINT_ASYNC (1 << 2) +#define USB_AS_ENDPOINT_ADAPTIVE (2 << 2) +#define USB_AS_ENDPOINT_SYNC (3 << 2) + +struct usb_as_iso_endpoint_descriptor { + __u8 bLength; /* in bytes: 7 */ + __u8 bDescriptorType; /* USB_DT_CS_ENDPOINT */ + __u8 bDescriptorSubtype; /* EP_GENERAL */ + __u8 bmAttributes; + __u8 bLockDelayUnits; + __le16 wLockDelay; +}; +#define USB_AS_ISO_ENDPOINT_DESC_SIZE 7 + +#define FU_CONTROL_UNDEFINED 0x00 +#define MUTE_CONTROL 0x01 +#define VOLUME_CONTROL 0x02 +#define BASS_CONTROL 0x03 +#define MID_CONTROL 0x04 +#define TREBLE_CONTROL 0x05 +#define GRAPHIC_EQUALIZER_CONTROL 0x06 +#define AUTOMATIC_GAIN_CONTROL 0x07 +#define DELAY_CONTROL 0x08 +#define BASS_BOOST_CONTROL 0x09 +#define LOUDNESS_CONTROL 0x0a + +#define FU_MUTE (1 << (MUTE_CONTROL - 1)) +#define FU_VOLUME (1 << (VOLUME_CONTROL - 1)) +#define FU_BASS (1 << (BASS_CONTROL - 1)) +#define FU_MID (1 << (MID_CONTROL - 1)) +#define FU_TREBLE (1 << (TREBLE_CONTROL - 1)) +#define FU_GRAPHIC_EQ (1 << (GRAPHIC_EQUALIZER_CONTROL - 1)) +#define FU_AUTO_GAIN (1 << (AUTOMATIC_GAIN_CONTROL - 1)) +#define FU_DELAY (1 << (DELAY_CONTROL - 1)) +#define FU_BASS_BOOST (1 << (BASS_BOOST_CONTROL - 1)) +#define FU_LOUDNESS (1 << (LOUDNESS_CONTROL - 1)) + +struct usb_audio_control { + struct list_head list; + const char *name; + u8 type; + int data[5]; + int (*set)(struct usb_audio_control *con, u8 cmd, int value); + int (*get)(struct usb_audio_control *con, u8 cmd); +}; + +static inline int generic_set_cmd(struct usb_audio_control *con, u8 cmd, int value) +{ + con->data[cmd] = value; + + return 0; +} + +static inline int generic_get_cmd(struct usb_audio_control *con, u8 cmd) +{ + return con->data[cmd]; +} + +struct usb_audio_control_selector { + struct list_head list; + struct list_head control; + u8 id; + const char *name; + u8 type; + struct usb_descriptor_header *desc; +}; + #endif /* __LINUX_USB_AUDIO_H */ diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h index b145119a90da..93223638f702 100644 --- a/include/linux/usb/ch9.h +++ b/include/linux/usb/ch9.h @@ -191,6 +191,8 @@ struct usb_ctrlrequest { #define USB_DT_WIRE_ADAPTER 0x21 #define USB_DT_RPIPE 0x22 #define USB_DT_CS_RADIO_CONTROL 0x23 +/* From the USB 3.0 spec */ +#define USB_DT_SS_ENDPOINT_COMP 0x30 /* Conventional codes for class-specific descriptors. The convention is * defined in the USB "Common Class" Spec (3.11). Individual class specs @@ -535,6 +537,20 @@ static inline int usb_endpoint_is_isoc_out( /*-------------------------------------------------------------------------*/ +/* USB_DT_SS_ENDPOINT_COMP: SuperSpeed Endpoint Companion descriptor */ +struct usb_ss_ep_comp_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __u8 bMaxBurst; + __u8 bmAttributes; + __u16 wBytesPerInterval; +} __attribute__ ((packed)); + +#define USB_DT_SS_EP_COMP_SIZE 6 + +/*-------------------------------------------------------------------------*/ + /* USB_DT_DEVICE_QUALIFIER: Device Qualifier descriptor */ struct usb_qualifier_descriptor { __u8 bLength; @@ -752,6 +768,7 @@ enum usb_device_speed { USB_SPEED_LOW, USB_SPEED_FULL, /* usb 1.1 */ USB_SPEED_HIGH, /* usb 2.0 */ USB_SPEED_VARIABLE, /* wireless (usb 2.5) */ + USB_SPEED_SUPER, /* usb 3.0 */ }; enum usb_device_state { diff --git a/include/linux/usb/composite.h b/include/linux/usb/composite.h index acd7b0f06c8a..4f6bb3d2160e 100644 --- a/include/linux/usb/composite.h +++ b/include/linux/usb/composite.h @@ -124,6 +124,7 @@ struct usb_function { void (*suspend)(struct usb_function *); void (*resume)(struct usb_function *); + /* private: */ /* internals */ struct list_head list; }; @@ -219,6 +220,7 @@ struct usb_configuration { struct usb_composite_dev *cdev; + /* private: */ /* internals */ struct list_head list; struct list_head functions; @@ -321,6 +323,7 @@ struct usb_composite_dev { struct usb_configuration *config; + /* private: */ /* internals */ struct usb_device_descriptor desc; struct list_head configs; diff --git a/include/linux/usb/langwell_otg.h b/include/linux/usb/langwell_otg.h new file mode 100644 index 000000000000..e115ae6df1da --- /dev/null +++ b/include/linux/usb/langwell_otg.h @@ -0,0 +1,177 @@ +/* + * Intel Langwell USB OTG transceiver driver + * Copyright (C) 2008, Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * + */ + +#ifndef __LANGWELL_OTG_H__ +#define __LANGWELL_OTG_H__ + +/* notify transceiver driver about OTG events */ +extern void langwell_update_transceiver(void); +/* HCD register bus driver */ +extern int langwell_register_host(struct pci_driver *host_driver); +/* HCD unregister bus driver */ +extern void langwell_unregister_host(struct pci_driver *host_driver); +/* DCD register bus driver */ +extern int langwell_register_peripheral(struct pci_driver *client_driver); +/* DCD unregister bus driver */ +extern void langwell_unregister_peripheral(struct pci_driver *client_driver); +/* No silent failure, output warning message */ +extern void langwell_otg_nsf_msg(unsigned long message); + +#define CI_USBCMD 0x30 +# define USBCMD_RST BIT(1) +# define USBCMD_RS BIT(0) +#define CI_USBSTS 0x34 +# define USBSTS_SLI BIT(8) +# define USBSTS_URI BIT(6) +# define USBSTS_PCI BIT(2) +#define CI_PORTSC1 0x74 +# define PORTSC_PP BIT(12) +# define PORTSC_LS (BIT(11) | BIT(10)) +# define PORTSC_SUSP BIT(7) +# define PORTSC_CCS BIT(0) +#define CI_HOSTPC1 0xb4 +# define HOSTPC1_PHCD BIT(22) +#define CI_OTGSC 0xf4 +# define OTGSC_DPIE BIT(30) +# define OTGSC_1MSE BIT(29) +# define OTGSC_BSEIE BIT(28) +# define OTGSC_BSVIE BIT(27) +# define OTGSC_ASVIE BIT(26) +# define OTGSC_AVVIE BIT(25) +# define OTGSC_IDIE BIT(24) +# define OTGSC_DPIS BIT(22) +# define OTGSC_1MSS BIT(21) +# define OTGSC_BSEIS BIT(20) +# define OTGSC_BSVIS BIT(19) +# define OTGSC_ASVIS BIT(18) +# define OTGSC_AVVIS BIT(17) +# define OTGSC_IDIS BIT(16) +# define OTGSC_DPS BIT(14) +# define OTGSC_1MST BIT(13) +# define OTGSC_BSE BIT(12) +# define OTGSC_BSV BIT(11) +# define OTGSC_ASV BIT(10) +# define OTGSC_AVV BIT(9) +# define OTGSC_ID BIT(8) +# define OTGSC_HABA BIT(7) +# define OTGSC_HADP BIT(6) +# define OTGSC_IDPU BIT(5) +# define OTGSC_DP BIT(4) +# define OTGSC_OT BIT(3) +# define OTGSC_HAAR BIT(2) +# define OTGSC_VC BIT(1) +# define OTGSC_VD BIT(0) +# define OTGSC_INTEN_MASK (0x7f << 24) +# define OTGSC_INTSTS_MASK (0x7f << 16) +#define CI_USBMODE 0xf8 +# define USBMODE_CM (BIT(1) | BIT(0)) +# define USBMODE_IDLE 0 +# define USBMODE_DEVICE 0x2 +# define USBMODE_HOST 0x3 + +#define INTR_DUMMY_MASK (USBSTS_SLI | USBSTS_URI | USBSTS_PCI) + +struct otg_hsm { + /* Input */ + int a_bus_resume; + int a_bus_suspend; + int a_conn; + int a_sess_vld; + int a_srp_det; + int a_vbus_vld; + int b_bus_resume; + int b_bus_suspend; + int b_conn; + int b_se0_srp; + int b_sess_end; + int b_sess_vld; + int id; + + /* Internal variables */ + int a_set_b_hnp_en; + int b_srp_done; + int b_hnp_enable; + + /* Timeout indicator for timers */ + int a_wait_vrise_tmout; + int a_wait_bcon_tmout; + int a_aidl_bdis_tmout; + int b_ase0_brst_tmout; + int b_bus_suspend_tmout; + int b_srp_res_tmout; + + /* Informative variables */ + int a_bus_drop; + int a_bus_req; + int a_clr_err; + int a_suspend_req; + int b_bus_req; + + /* Output */ + int drv_vbus; + int loc_conn; + int loc_sof; + + /* Others */ + int b_bus_suspend_vld; +}; + +#define TA_WAIT_VRISE 100 +#define TA_WAIT_BCON 30000 +#define TA_AIDL_BDIS 15000 +#define TB_ASE0_BRST 5000 +#define TB_SE0_SRP 2 +#define TB_SRP_RES 100 +#define TB_BUS_SUSPEND 500 + +struct langwell_otg_timer { + unsigned long expires; /* Number of count increase to timeout */ + unsigned long count; /* Tick counter */ + void (*function)(unsigned long); /* Timeout function */ + unsigned long data; /* Data passed to function */ + struct list_head list; +}; + +struct langwell_otg { + struct otg_transceiver otg; + struct otg_hsm hsm; + void __iomem *regs; + unsigned region; + struct pci_driver *host_ops; + struct pci_driver *client_ops; + struct pci_dev *pdev; + struct work_struct work; + struct workqueue_struct *qwork; + spinlock_t lock; + spinlock_t wq_lock; +}; + +static inline struct langwell_otg *otg_to_langwell(struct otg_transceiver *otg) +{ + return container_of(otg, struct langwell_otg, otg); +} + +#ifdef DEBUG +#define otg_dbg(fmt, args...) \ + printk(KERN_DEBUG fmt , ## args) +#else +#define otg_dbg(fmt, args...) \ + do { } while (0) +#endif /* DEBUG */ +#endif /* __LANGWELL_OTG_H__ */ diff --git a/include/linux/usb/langwell_udc.h b/include/linux/usb/langwell_udc.h new file mode 100644 index 000000000000..c949178a6530 --- /dev/null +++ b/include/linux/usb/langwell_udc.h @@ -0,0 +1,310 @@ +/* + * Intel Langwell USB Device Controller driver + * Copyright (C) 2008-2009, Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * + */ + +#ifndef __LANGWELL_UDC_H +#define __LANGWELL_UDC_H + + +/* MACRO defines */ +#define CAP_REG_OFFSET 0x0 +#define OP_REG_OFFSET 0x28 + +#define DMA_ADDR_INVALID (~(dma_addr_t)0) + +#define DQH_ALIGNMENT 2048 +#define DTD_ALIGNMENT 64 +#define DMA_BOUNDARY 4096 + +#define EP0_MAX_PKT_SIZE 64 +#define EP_DIR_IN 1 +#define EP_DIR_OUT 0 + +#define FLUSH_TIMEOUT 1000 +#define RESET_TIMEOUT 1000 +#define SETUPSTAT_TIMEOUT 100 +#define PRIME_TIMEOUT 100 + + +/* device memory space registers */ + +/* Capability Registers, BAR0 + CAP_REG_OFFSET */ +struct langwell_cap_regs { + /* offset: 0x0 */ + u8 caplength; /* offset of Operational Register */ + u8 _reserved3; + u16 hciversion; /* H: BCD encoding of host version */ + u32 hcsparams; /* H: host port steering logic capability */ + u32 hccparams; /* H: host multiple mode control capability */ +#define HCC_LEN BIT(17) /* Link power management (LPM) capability */ + u8 _reserved4[0x20-0xc]; + /* offset: 0x20 */ + u16 dciversion; /* BCD encoding of device version */ + u8 _reserved5[0x24-0x22]; + u32 dccparams; /* overall device controller capability */ +#define HOSTCAP BIT(8) /* host capable */ +#define DEVCAP BIT(7) /* device capable */ +#define DEN(d) \ + (((d)>>0)&0x1f) /* bits 4:0, device endpoint number */ +} __attribute__ ((packed)); + + +/* Operational Registers, BAR0 + OP_REG_OFFSET */ +struct langwell_op_regs { + /* offset: 0x28 */ + u32 extsts; +#define EXTS_TI1 BIT(4) /* general purpose timer interrupt 1 */ +#define EXTS_TI1TI0 BIT(3) /* general purpose timer interrupt 0 */ +#define EXTS_TI1UPI BIT(2) /* USB host periodic interrupt */ +#define EXTS_TI1UAI BIT(1) /* USB host asynchronous interrupt */ +#define EXTS_TI1NAKI BIT(0) /* NAK interrupt */ + u32 extintr; +#define EXTI_TIE1 BIT(4) /* general purpose timer interrupt enable 1 */ +#define EXTI_TIE0 BIT(3) /* general purpose timer interrupt enable 0 */ +#define EXTI_UPIE BIT(2) /* USB host periodic interrupt enable */ +#define EXTI_UAIE BIT(1) /* USB host asynchronous interrupt enable */ +#define EXTI_NAKE BIT(0) /* NAK interrupt enable */ + /* offset: 0x30 */ + u32 usbcmd; +#define CMD_HIRD(u) \ + (((u)>>24)&0xf) /* bits 27:24, host init resume duration */ +#define CMD_ITC(u) \ + (((u)>>16)&0xff) /* bits 23:16, interrupt threshold control */ +#define CMD_PPE BIT(15) /* per-port change events enable */ +#define CMD_ATDTW BIT(14) /* add dTD tripwire */ +#define CMD_SUTW BIT(13) /* setup tripwire */ +#define CMD_ASPE BIT(11) /* asynchronous schedule park mode enable */ +#define CMD_FS2 BIT(10) /* frame list size */ +#define CMD_ASP1 BIT(9) /* asynchronous schedule park mode count */ +#define CMD_ASP0 BIT(8) +#define CMD_LR BIT(7) /* light host/device controller reset */ +#define CMD_IAA BIT(6) /* interrupt on async advance doorbell */ +#define CMD_ASE BIT(5) /* asynchronous schedule enable */ +#define CMD_PSE BIT(4) /* periodic schedule enable */ +#define CMD_FS1 BIT(3) +#define CMD_FS0 BIT(2) +#define CMD_RST BIT(1) /* controller reset */ +#define CMD_RUNSTOP BIT(0) /* run/stop */ + u32 usbsts; +#define STS_PPCI(u) \ + (((u)>>16)&0xffff) /* bits 31:16, port-n change detect */ +#define STS_AS BIT(15) /* asynchronous schedule status */ +#define STS_PS BIT(14) /* periodic schedule status */ +#define STS_RCL BIT(13) /* reclamation */ +#define STS_HCH BIT(12) /* HC halted */ +#define STS_ULPII BIT(10) /* ULPI interrupt */ +#define STS_SLI BIT(8) /* DC suspend */ +#define STS_SRI BIT(7) /* SOF received */ +#define STS_URI BIT(6) /* USB reset received */ +#define STS_AAI BIT(5) /* interrupt on async advance */ +#define STS_SEI BIT(4) /* system error */ +#define STS_FRI BIT(3) /* frame list rollover */ +#define STS_PCI BIT(2) /* port change detect */ +#define STS_UEI BIT(1) /* USB error interrupt */ +#define STS_UI BIT(0) /* USB interrupt */ + u32 usbintr; +/* bits 31:16, per-port interrupt enable */ +#define INTR_PPCE(u) (((u)>>16)&0xffff) +#define INTR_ULPIE BIT(10) /* ULPI enable */ +#define INTR_SLE BIT(8) /* DC sleep/suspend enable */ +#define INTR_SRE BIT(7) /* SOF received enable */ +#define INTR_URE BIT(6) /* USB reset enable */ +#define INTR_AAE BIT(5) /* interrupt on async advance enable */ +#define INTR_SEE BIT(4) /* system error enable */ +#define INTR_FRE BIT(3) /* frame list rollover enable */ +#define INTR_PCE BIT(2) /* port change detect enable */ +#define INTR_UEE BIT(1) /* USB error interrupt enable */ +#define INTR_UE BIT(0) /* USB interrupt enable */ + u32 frindex; /* frame index */ +#define FRINDEX_MASK (0x3fff << 0) + u32 ctrldssegment; /* not used */ + u32 deviceaddr; +#define USBADR_SHIFT 25 +#define USBADR(d) \ + (((d)>>25)&0x7f) /* bits 31:25, device address */ +#define USBADR_MASK (0x7f << 25) +#define USBADRA BIT(24) /* device address advance */ + u32 endpointlistaddr;/* endpoint list top memory address */ +/* bits 31:11, endpoint list pointer */ +#define EPBASE(d) (((d)>>11)&0x1fffff) +#define ENDPOINTLISTADDR_MASK (0x1fffff << 11) + u32 ttctrl; /* H: TT operatin, not used */ + /* offset: 0x50 */ + u32 burstsize; /* burst size of data movement */ +#define TXPBURST(b) \ + (((b)>>8)&0xff) /* bits 15:8, TX burst length */ +#define RXPBURST(b) \ + (((b)>>0)&0xff) /* bits 7:0, RX burst length */ + u32 txfilltuning; /* TX tuning */ + u32 txttfilltuning; /* H: TX TT tuning */ + u32 ic_usb; /* control the IC_USB FS/LS transceiver */ + /* offset: 0x60 */ + u32 ulpi_viewport; /* indirect access to ULPI PHY */ +#define ULPIWU BIT(31) /* ULPI wakeup */ +#define ULPIRUN BIT(30) /* ULPI read/write run */ +#define ULPIRW BIT(29) /* ULPI read/write control */ +#define ULPISS BIT(27) /* ULPI sync state */ +#define ULPIPORT(u) \ + (((u)>>24)&7) /* bits 26:24, ULPI port number */ +#define ULPIADDR(u) \ + (((u)>>16)&0xff) /* bits 23:16, ULPI data address */ +#define ULPIDATRD(u) \ + (((u)>>8)&0xff) /* bits 15:8, ULPI data read */ +#define ULPIDATWR(u) \ + (((u)>>0)&0xff) /* bits 7:0, ULPI date write */ + u8 _reserved6[0x70-0x64]; + /* offset: 0x70 */ + u32 configflag; /* H: not used */ + u32 portsc1; /* port status */ +#define DA(p) \ + (((p)>>25)&0x7f) /* bits 31:25, device address */ +#define PORTS_SSTS (BIT(24) | BIT(23)) /* suspend status */ +#define PORTS_WKOC BIT(22) /* wake on over-current enable */ +#define PORTS_WKDS BIT(21) /* wake on disconnect enable */ +#define PORTS_WKCN BIT(20) /* wake on connect enable */ +#define PORTS_PTC(p) (((p)>>16)&0xf) /* bits 19:16, port test control */ +#define PORTS_PIC (BIT(15) | BIT(14)) /* port indicator control */ +#define PORTS_PO BIT(13) /* port owner */ +#define PORTS_PP BIT(12) /* port power */ +#define PORTS_LS (BIT(11) | BIT(10)) /* line status */ +#define PORTS_SLP BIT(9) /* suspend using L1 */ +#define PORTS_PR BIT(8) /* port reset */ +#define PORTS_SUSP BIT(7) /* suspend */ +#define PORTS_FPR BIT(6) /* force port resume */ +#define PORTS_OCC BIT(5) /* over-current change */ +#define PORTS_OCA BIT(4) /* over-current active */ +#define PORTS_PEC BIT(3) /* port enable/disable change */ +#define PORTS_PE BIT(2) /* port enable/disable */ +#define PORTS_CSC BIT(1) /* connect status change */ +#define PORTS_CCS BIT(0) /* current connect status */ + u8 _reserved7[0xb4-0x78]; + /* offset: 0xb4 */ + u32 devlc; /* control LPM and each USB port behavior */ +/* bits 31:29, parallel transceiver select */ +#define LPM_PTS(d) (((d)>>29)&7) +#define LPM_STS BIT(28) /* serial transceiver select */ +#define LPM_PTW BIT(27) /* parallel transceiver width */ +#define LPM_PSPD(d) (((d)>>25)&3) /* bits 26:25, port speed */ +#define LPM_PSPD_MASK (BIT(26) | BIT(25)) +#define LPM_SPEED_FULL 0 +#define LPM_SPEED_LOW 1 +#define LPM_SPEED_HIGH 2 +#define LPM_SRT BIT(24) /* shorten reset time */ +#define LPM_PFSC BIT(23) /* port force full speed connect */ +#define LPM_PHCD BIT(22) /* PHY low power suspend clock disable */ +#define LPM_STL BIT(16) /* STALL reply to LPM token */ +#define LPM_BA(d) \ + (((d)>>1)&0x7ff) /* bits 11:1, BmAttributes */ +#define LPM_NYT_ACK BIT(0) /* NYET/ACK reply to LPM token */ + u8 _reserved8[0xf4-0xb8]; + /* offset: 0xf4 */ + u32 otgsc; /* On-The-Go status and control */ +#define OTGSC_DPIE BIT(30) /* data pulse interrupt enable */ +#define OTGSC_MSE BIT(29) /* 1 ms timer interrupt enable */ +#define OTGSC_BSEIE BIT(28) /* B session end interrupt enable */ +#define OTGSC_BSVIE BIT(27) /* B session valid interrupt enable */ +#define OTGSC_ASVIE BIT(26) /* A session valid interrupt enable */ +#define OTGSC_AVVIE BIT(25) /* A VBUS valid interrupt enable */ +#define OTGSC_IDIE BIT(24) /* USB ID interrupt enable */ +#define OTGSC_DPIS BIT(22) /* data pulse interrupt status */ +#define OTGSC_MSS BIT(21) /* 1 ms timer interrupt status */ +#define OTGSC_BSEIS BIT(20) /* B session end interrupt status */ +#define OTGSC_BSVIS BIT(19) /* B session valid interrupt status */ +#define OTGSC_ASVIS BIT(18) /* A session valid interrupt status */ +#define OTGSC_AVVIS BIT(17) /* A VBUS valid interrupt status */ +#define OTGSC_IDIS BIT(16) /* USB ID interrupt status */ +#define OTGSC_DPS BIT(14) /* data bus pulsing status */ +#define OTGSC_MST BIT(13) /* 1 ms timer toggle */ +#define OTGSC_BSE BIT(12) /* B session end */ +#define OTGSC_BSV BIT(11) /* B session valid */ +#define OTGSC_ASV BIT(10) /* A session valid */ +#define OTGSC_AVV BIT(9) /* A VBUS valid */ +#define OTGSC_USBID BIT(8) /* USB ID */ +#define OTGSC_HABA BIT(7) /* hw assist B-disconnect to A-connect */ +#define OTGSC_HADP BIT(6) /* hw assist data pulse */ +#define OTGSC_IDPU BIT(5) /* ID pullup */ +#define OTGSC_DP BIT(4) /* data pulsing */ +#define OTGSC_OT BIT(3) /* OTG termination */ +#define OTGSC_HAAR BIT(2) /* hw assist auto reset */ +#define OTGSC_VC BIT(1) /* VBUS charge */ +#define OTGSC_VD BIT(0) /* VBUS discharge */ + u32 usbmode; +#define MODE_VBPS BIT(5) /* R/W VBUS power select */ +#define MODE_SDIS BIT(4) /* R/W stream disable mode */ +#define MODE_SLOM BIT(3) /* R/W setup lockout mode */ +#define MODE_ENSE BIT(2) /* endian select */ +#define MODE_CM(u) (((u)>>0)&3) /* bits 1:0, controller mode */ +#define MODE_IDLE 0 +#define MODE_DEVICE 2 +#define MODE_HOST 3 + u8 _reserved9[0x100-0xfc]; + /* offset: 0x100 */ + u32 endptnak; +#define EPTN(e) \ + (((e)>>16)&0xffff) /* bits 31:16, TX endpoint NAK */ +#define EPRN(e) \ + (((e)>>0)&0xffff) /* bits 15:0, RX endpoint NAK */ + u32 endptnaken; +#define EPTNE(e) \ + (((e)>>16)&0xffff) /* bits 31:16, TX endpoint NAK enable */ +#define EPRNE(e) \ + (((e)>>0)&0xffff) /* bits 15:0, RX endpoint NAK enable */ + u32 endptsetupstat; +#define SETUPSTAT_MASK (0xffff << 0) /* bits 15:0 */ +#define EP0SETUPSTAT_MASK 1 + u32 endptprime; +/* bits 31:16, prime endpoint transmit buffer */ +#define PETB(e) (((e)>>16)&0xffff) +/* bits 15:0, prime endpoint receive buffer */ +#define PERB(e) (((e)>>0)&0xffff) + /* offset: 0x110 */ + u32 endptflush; +/* bits 31:16, flush endpoint transmit buffer */ +#define FETB(e) (((e)>>16)&0xffff) +/* bits 15:0, flush endpoint receive buffer */ +#define FERB(e) (((e)>>0)&0xffff) + u32 endptstat; +/* bits 31:16, endpoint transmit buffer ready */ +#define ETBR(e) (((e)>>16)&0xffff) +/* bits 15:0, endpoint receive buffer ready */ +#define ERBR(e) (((e)>>0)&0xffff) + u32 endptcomplete; +/* bits 31:16, endpoint transmit complete event */ +#define ETCE(e) (((e)>>16)&0xffff) +/* bits 15:0, endpoint receive complete event */ +#define ERCE(e) (((e)>>0)&0xffff) + /* offset: 0x11c */ + u32 endptctrl[16]; +#define EPCTRL_TXE BIT(23) /* TX endpoint enable */ +#define EPCTRL_TXR BIT(22) /* TX data toggle reset */ +#define EPCTRL_TXI BIT(21) /* TX data toggle inhibit */ +#define EPCTRL_TXT(e) (((e)>>18)&3) /* bits 19:18, TX endpoint type */ +#define EPCTRL_TXT_SHIFT 18 +#define EPCTRL_TXD BIT(17) /* TX endpoint data source */ +#define EPCTRL_TXS BIT(16) /* TX endpoint STALL */ +#define EPCTRL_RXE BIT(7) /* RX endpoint enable */ +#define EPCTRL_RXR BIT(6) /* RX data toggle reset */ +#define EPCTRL_RXI BIT(5) /* RX data toggle inhibit */ +#define EPCTRL_RXT(e) (((e)>>2)&3) /* bits 3:2, RX endpoint type */ +#define EPCTRL_RXT_SHIFT 2 /* bits 19:18, TX endpoint type */ +#define EPCTRL_RXD BIT(1) /* RX endpoint data sink */ +#define EPCTRL_RXS BIT(0) /* RX endpoint STALL */ +} __attribute__ ((packed)); + +#endif /* __LANGWELL_UDC_H */ + diff --git a/include/linux/usb/otg.h b/include/linux/usb/otg.h index 1aaa826396a1..2443c0e7a80c 100644 --- a/include/linux/usb/otg.h +++ b/include/linux/usb/otg.h @@ -80,10 +80,10 @@ struct otg_transceiver { /* for board-specific init logic */ extern int otg_set_transceiver(struct otg_transceiver *); -#ifdef CONFIG_NOP_USB_XCEIV + +/* sometimes transceivers are accessed only through e.g. ULPI */ extern void usb_nop_xceiv_register(void); extern void usb_nop_xceiv_unregister(void); -#endif /* for usb host and peripheral controller drivers */ diff --git a/include/linux/usb/r8a66597.h b/include/linux/usb/r8a66597.h new file mode 100644 index 000000000000..e9f0384fa20c --- /dev/null +++ b/include/linux/usb/r8a66597.h @@ -0,0 +1,44 @@ +/* + * R8A66597 driver platform data + * + * Copyright (C) 2009 Renesas Solutions Corp. + * + * Author : Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + */ + +#ifndef __LINUX_USB_R8A66597_H +#define __LINUX_USB_R8A66597_H + +#define R8A66597_PLATDATA_XTAL_12MHZ 0x01 +#define R8A66597_PLATDATA_XTAL_24MHZ 0x02 +#define R8A66597_PLATDATA_XTAL_48MHZ 0x03 + +struct r8a66597_platdata { + /* This ops can controll port power instead of DVSTCTR register. */ + void (*port_power)(int port, int power); + + /* (external controller only) set R8A66597_PLATDATA_XTAL_nnMHZ */ + unsigned xtal:2; + + /* set one = 3.3V, set zero = 1.5V */ + unsigned vif:1; + + /* set one = big endian, set zero = little endian */ + unsigned endian:1; +}; +#endif + diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h index 8cdfed738fe4..44801d26a37a 100644 --- a/include/linux/usb/serial.h +++ b/include/linux/usb/serial.h @@ -15,6 +15,7 @@ #include <linux/kref.h> #include <linux/mutex.h> +#include <linux/sysrq.h> #define SERIAL_TTY_MAJOR 188 /* Nice legal number now */ #define SERIAL_TTY_MINORS 254 /* loads of devices :) */ @@ -26,6 +27,13 @@ /* parity check flag */ #define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK)) +enum port_dev_state { + PORT_UNREGISTERED, + PORT_REGISTERING, + PORT_REGISTERED, + PORT_UNREGISTERING, +}; + /** * usb_serial_port: structure for the specific ports of a device. * @serial: pointer back to the struct usb_serial owner of this port. @@ -91,12 +99,17 @@ struct usb_serial_port { int write_urb_busy; __u8 bulk_out_endpointAddress; + int tx_bytes_flight; + int urbs_in_flight; + wait_queue_head_t write_wait; struct work_struct work; char throttled; char throttle_req; char console; + unsigned long sysrq; /* sysrq timeout */ struct device dev; + enum port_dev_state dev_state; }; #define to_usb_serial_port(d) container_of(d, struct usb_serial_port, dev) @@ -181,8 +194,10 @@ static inline void usb_set_serial_data(struct usb_serial *serial, void *data) * This will be called when the struct usb_serial structure is fully set * set up. Do any local initialization of the device, or any private * memory structure allocation at this point in time. - * @shutdown: pointer to the driver's shutdown function. This will be - * called when the device is removed from the system. + * @disconnect: pointer to the driver's disconnect function. This will be + * called when the device is unplugged or unbound from the driver. + * @release: pointer to the driver's release function. This will be called + * when the usb_serial data structure is about to be destroyed. * @usb_driver: pointer to the struct usb_driver that controls this * device. This is necessary to allow dynamic ids to be added to * the driver from sysfs. @@ -207,12 +222,14 @@ struct usb_serial_driver { struct device_driver driver; struct usb_driver *usb_driver; struct usb_dynids dynids; + int max_in_flight_urbs; int (*probe)(struct usb_serial *serial, const struct usb_device_id *id); int (*attach)(struct usb_serial *serial); int (*calc_num_ports) (struct usb_serial *serial); - void (*shutdown)(struct usb_serial *serial); + void (*disconnect)(struct usb_serial *serial); + void (*release)(struct usb_serial *serial); int (*port_probe)(struct usb_serial_port *port); int (*port_remove)(struct usb_serial_port *port); @@ -294,9 +311,16 @@ extern void usb_serial_generic_read_bulk_callback(struct urb *urb); extern void usb_serial_generic_write_bulk_callback(struct urb *urb); extern void usb_serial_generic_throttle(struct tty_struct *tty); extern void usb_serial_generic_unthrottle(struct tty_struct *tty); -extern void usb_serial_generic_shutdown(struct usb_serial *serial); +extern void usb_serial_generic_disconnect(struct usb_serial *serial); +extern void usb_serial_generic_release(struct usb_serial *serial); extern int usb_serial_generic_register(int debug); extern void usb_serial_generic_deregister(void); +extern void usb_serial_generic_resubmit_read_urb(struct usb_serial_port *port, + gfp_t mem_flags); +extern int usb_serial_handle_sysrq_char(struct usb_serial_port *port, + unsigned int ch); +extern int usb_serial_handle_break(struct usb_serial_port *port); + extern int usb_serial_bus_register(struct usb_serial_driver *device); extern void usb_serial_bus_deregister(struct usb_serial_driver *device); |