diff options
Diffstat (limited to 'include/linux')
216 files changed, 3498 insertions, 1067 deletions
diff --git a/include/linux/alarmtimer.h b/include/linux/alarmtimer.h new file mode 100644 index 000000000000..c5d6095b46f8 --- /dev/null +++ b/include/linux/alarmtimer.h @@ -0,0 +1,40 @@ +#ifndef _LINUX_ALARMTIMER_H +#define _LINUX_ALARMTIMER_H + +#include <linux/time.h> +#include <linux/hrtimer.h> +#include <linux/timerqueue.h> +#include <linux/rtc.h> + +enum alarmtimer_type { + ALARM_REALTIME, + ALARM_BOOTTIME, + + ALARM_NUMTYPE, +}; + +/** + * struct alarm - Alarm timer structure + * @node: timerqueue node for adding to the event list this value + * also includes the expiration time. + * @period: Period for recuring alarms + * @function: Function pointer to be executed when the timer fires. + * @type: Alarm type (BOOTTIME/REALTIME) + * @enabled: Flag that represents if the alarm is set to fire or not + * @data: Internal data value. + */ +struct alarm { + struct timerqueue_node node; + ktime_t period; + void (*function)(struct alarm *); + enum alarmtimer_type type; + bool enabled; + void *data; +}; + +void alarm_init(struct alarm *alarm, enum alarmtimer_type type, + void (*function)(struct alarm *)); +void alarm_start(struct alarm *alarm, ktime_t start, ktime_t period); +void alarm_cancel(struct alarm *alarm); + +#endif diff --git a/include/linux/amba/clcd.h b/include/linux/amba/clcd.h index 24d26efd1432..e82e3ee2c54a 100644 --- a/include/linux/amba/clcd.h +++ b/include/linux/amba/clcd.h @@ -136,7 +136,7 @@ struct clcd_board { int (*check)(struct clcd_fb *fb, struct fb_var_screeninfo *var); /* - * Compulsary. Decode fb->fb.var into regs->*. In the case of + * Compulsory. Decode fb->fb.var into regs->*. In the case of * fixed timing, set regs->* to the register values required. */ void (*decode)(struct clcd_fb *fb, struct clcd_regs *regs); diff --git a/include/linux/amba/mmci.h b/include/linux/amba/mmci.h index f60227088b7b..21114810c7c0 100644 --- a/include/linux/amba/mmci.h +++ b/include/linux/amba/mmci.h @@ -30,15 +30,15 @@ struct dma_chan; * @cd_invert: true if the gpio_cd pin value is active low * @capabilities: the capabilities of the block as implemented in * this platform, signify anything MMC_CAP_* from mmc/host.h - * @dma_filter: function used to select an apropriate RX and TX + * @dma_filter: function used to select an appropriate RX and TX * DMA channel to be used for DMA, if and only if you're deploying the * generic DMA engine * @dma_rx_param: parameter passed to the DMA allocation - * filter in order to select an apropriate RX channel. If + * filter in order to select an appropriate RX channel. If * there is a bidirectional RX+TX channel, then just specify * this and leave dma_tx_param set to NULL * @dma_tx_param: parameter passed to the DMA allocation - * filter in order to select an apropriate TX channel. If this + * filter in order to select an appropriate TX channel. If this * is NULL the driver will attempt to use the RX channel as a * bidirectional channel */ diff --git a/include/linux/ath9k_platform.h b/include/linux/ath9k_platform.h index b847fc7b93f9..60a7c49dcb49 100644 --- a/include/linux/ath9k_platform.h +++ b/include/linux/ath9k_platform.h @@ -23,6 +23,13 @@ struct ath9k_platform_data { u16 eeprom_data[ATH9K_PLAT_EEP_MAX_WORDS]; + u8 *macaddr; + + int led_pin; + u32 gpio_mask; + u32 gpio_val; + + bool is_clk_25mhz; }; #endif /* _LINUX_ATH9K_PLATFORM_H */ diff --git a/include/linux/atmdev.h b/include/linux/atmdev.h index 475f8c42c0e9..381f4cec8260 100644 --- a/include/linux/atmdev.h +++ b/include/linux/atmdev.h @@ -443,6 +443,7 @@ void atm_dev_signal_change(struct atm_dev *dev, char signal); void vcc_insert_socket(struct sock *sk); +void atm_dev_release_vccs(struct atm_dev *dev); /* * This is approximately the algorithm used by alloc_skb. diff --git a/include/linux/bch.h b/include/linux/bch.h new file mode 100644 index 000000000000..295b4ef153bb --- /dev/null +++ b/include/linux/bch.h @@ -0,0 +1,79 @@ +/* + * Generic binary BCH encoding/decoding library + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 51 + * Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. + * + * Copyright © 2011 Parrot S.A. + * + * Author: Ivan Djelic <ivan.djelic@parrot.com> + * + * Description: + * + * This library provides runtime configurable encoding/decoding of binary + * Bose-Chaudhuri-Hocquenghem (BCH) codes. +*/ +#ifndef _BCH_H +#define _BCH_H + +#include <linux/types.h> + +/** + * struct bch_control - BCH control structure + * @m: Galois field order + * @n: maximum codeword size in bits (= 2^m-1) + * @t: error correction capability in bits + * @ecc_bits: ecc exact size in bits, i.e. generator polynomial degree (<=m*t) + * @ecc_bytes: ecc max size (m*t bits) in bytes + * @a_pow_tab: Galois field GF(2^m) exponentiation lookup table + * @a_log_tab: Galois field GF(2^m) log lookup table + * @mod8_tab: remainder generator polynomial lookup tables + * @ecc_buf: ecc parity words buffer + * @ecc_buf2: ecc parity words buffer + * @xi_tab: GF(2^m) base for solving degree 2 polynomial roots + * @syn: syndrome buffer + * @cache: log-based polynomial representation buffer + * @elp: error locator polynomial + * @poly_2t: temporary polynomials of degree 2t + */ +struct bch_control { + unsigned int m; + unsigned int n; + unsigned int t; + unsigned int ecc_bits; + unsigned int ecc_bytes; +/* private: */ + uint16_t *a_pow_tab; + uint16_t *a_log_tab; + uint32_t *mod8_tab; + uint32_t *ecc_buf; + uint32_t *ecc_buf2; + unsigned int *xi_tab; + unsigned int *syn; + int *cache; + struct gf_poly *elp; + struct gf_poly *poly_2t[4]; +}; + +struct bch_control *init_bch(int m, int t, unsigned int prim_poly); + +void free_bch(struct bch_control *bch); + +void encode_bch(struct bch_control *bch, const uint8_t *data, + unsigned int len, uint8_t *ecc); + +int decode_bch(struct bch_control *bch, const uint8_t *data, unsigned int len, + const uint8_t *recv_ecc, const uint8_t *calc_ecc, + const unsigned int *syn, unsigned int *errloc); + +#endif /* _BCH_H */ diff --git a/include/linux/bcma/bcma.h b/include/linux/bcma/bcma.h new file mode 100644 index 000000000000..08763e4e848f --- /dev/null +++ b/include/linux/bcma/bcma.h @@ -0,0 +1,224 @@ +#ifndef LINUX_BCMA_H_ +#define LINUX_BCMA_H_ + +#include <linux/pci.h> +#include <linux/mod_devicetable.h> + +#include <linux/bcma/bcma_driver_chipcommon.h> +#include <linux/bcma/bcma_driver_pci.h> + +#include "bcma_regs.h" + +struct bcma_device; +struct bcma_bus; + +enum bcma_hosttype { + BCMA_HOSTTYPE_NONE, + BCMA_HOSTTYPE_PCI, + BCMA_HOSTTYPE_SDIO, +}; + +struct bcma_chipinfo { + u16 id; + u8 rev; + u8 pkg; +}; + +struct bcma_host_ops { + u8 (*read8)(struct bcma_device *core, u16 offset); + u16 (*read16)(struct bcma_device *core, u16 offset); + u32 (*read32)(struct bcma_device *core, u16 offset); + void (*write8)(struct bcma_device *core, u16 offset, u8 value); + void (*write16)(struct bcma_device *core, u16 offset, u16 value); + void (*write32)(struct bcma_device *core, u16 offset, u32 value); + /* Agent ops */ + u32 (*aread32)(struct bcma_device *core, u16 offset); + void (*awrite32)(struct bcma_device *core, u16 offset, u32 value); +}; + +/* Core manufacturers */ +#define BCMA_MANUF_ARM 0x43B +#define BCMA_MANUF_MIPS 0x4A7 +#define BCMA_MANUF_BCM 0x4BF + +/* Core class values. */ +#define BCMA_CL_SIM 0x0 +#define BCMA_CL_EROM 0x1 +#define BCMA_CL_CORESIGHT 0x9 +#define BCMA_CL_VERIF 0xB +#define BCMA_CL_OPTIMO 0xD +#define BCMA_CL_GEN 0xE +#define BCMA_CL_PRIMECELL 0xF + +/* Core-ID values. */ +#define BCMA_CORE_OOB_ROUTER 0x367 /* Out of band */ +#define BCMA_CORE_INVALID 0x700 +#define BCMA_CORE_CHIPCOMMON 0x800 +#define BCMA_CORE_ILINE20 0x801 +#define BCMA_CORE_SRAM 0x802 +#define BCMA_CORE_SDRAM 0x803 +#define BCMA_CORE_PCI 0x804 +#define BCMA_CORE_MIPS 0x805 +#define BCMA_CORE_ETHERNET 0x806 +#define BCMA_CORE_V90 0x807 +#define BCMA_CORE_USB11_HOSTDEV 0x808 +#define BCMA_CORE_ADSL 0x809 +#define BCMA_CORE_ILINE100 0x80A +#define BCMA_CORE_IPSEC 0x80B +#define BCMA_CORE_UTOPIA 0x80C +#define BCMA_CORE_PCMCIA 0x80D +#define BCMA_CORE_INTERNAL_MEM 0x80E +#define BCMA_CORE_MEMC_SDRAM 0x80F +#define BCMA_CORE_OFDM 0x810 +#define BCMA_CORE_EXTIF 0x811 +#define BCMA_CORE_80211 0x812 +#define BCMA_CORE_PHY_A 0x813 +#define BCMA_CORE_PHY_B 0x814 +#define BCMA_CORE_PHY_G 0x815 +#define BCMA_CORE_MIPS_3302 0x816 +#define BCMA_CORE_USB11_HOST 0x817 +#define BCMA_CORE_USB11_DEV 0x818 +#define BCMA_CORE_USB20_HOST 0x819 +#define BCMA_CORE_USB20_DEV 0x81A +#define BCMA_CORE_SDIO_HOST 0x81B +#define BCMA_CORE_ROBOSWITCH 0x81C +#define BCMA_CORE_PARA_ATA 0x81D +#define BCMA_CORE_SATA_XORDMA 0x81E +#define BCMA_CORE_ETHERNET_GBIT 0x81F +#define BCMA_CORE_PCIE 0x820 +#define BCMA_CORE_PHY_N 0x821 +#define BCMA_CORE_SRAM_CTL 0x822 +#define BCMA_CORE_MINI_MACPHY 0x823 +#define BCMA_CORE_ARM_1176 0x824 +#define BCMA_CORE_ARM_7TDMI 0x825 +#define BCMA_CORE_PHY_LP 0x826 +#define BCMA_CORE_PMU 0x827 +#define BCMA_CORE_PHY_SSN 0x828 +#define BCMA_CORE_SDIO_DEV 0x829 +#define BCMA_CORE_ARM_CM3 0x82A +#define BCMA_CORE_PHY_HT 0x82B +#define BCMA_CORE_MIPS_74K 0x82C +#define BCMA_CORE_MAC_GBIT 0x82D +#define BCMA_CORE_DDR12_MEM_CTL 0x82E +#define BCMA_CORE_PCIE_RC 0x82F /* PCIe Root Complex */ +#define BCMA_CORE_OCP_OCP_BRIDGE 0x830 +#define BCMA_CORE_SHARED_COMMON 0x831 +#define BCMA_CORE_OCP_AHB_BRIDGE 0x832 +#define BCMA_CORE_SPI_HOST 0x833 +#define BCMA_CORE_I2S 0x834 +#define BCMA_CORE_SDR_DDR1_MEM_CTL 0x835 /* SDR/DDR1 memory controller core */ +#define BCMA_CORE_SHIM 0x837 /* SHIM component in ubus/6362 */ +#define BCMA_CORE_DEFAULT 0xFFF + +#define BCMA_MAX_NR_CORES 16 + +struct bcma_device { + struct bcma_bus *bus; + struct bcma_device_id id; + + struct device dev; + bool dev_registered; + + u8 core_index; + + u32 addr; + u32 wrap; + + void *drvdata; + struct list_head list; +}; + +static inline void *bcma_get_drvdata(struct bcma_device *core) +{ + return core->drvdata; +} +static inline void bcma_set_drvdata(struct bcma_device *core, void *drvdata) +{ + core->drvdata = drvdata; +} + +struct bcma_driver { + const char *name; + const struct bcma_device_id *id_table; + + int (*probe)(struct bcma_device *dev); + void (*remove)(struct bcma_device *dev); + int (*suspend)(struct bcma_device *dev, pm_message_t state); + int (*resume)(struct bcma_device *dev); + void (*shutdown)(struct bcma_device *dev); + + struct device_driver drv; +}; +extern +int __bcma_driver_register(struct bcma_driver *drv, struct module *owner); +static inline int bcma_driver_register(struct bcma_driver *drv) +{ + return __bcma_driver_register(drv, THIS_MODULE); +} +extern void bcma_driver_unregister(struct bcma_driver *drv); + +struct bcma_bus { + /* The MMIO area. */ + void __iomem *mmio; + + const struct bcma_host_ops *ops; + + enum bcma_hosttype hosttype; + union { + /* Pointer to the PCI bus (only for BCMA_HOSTTYPE_PCI) */ + struct pci_dev *host_pci; + /* Pointer to the SDIO device (only for BCMA_HOSTTYPE_SDIO) */ + struct sdio_func *host_sdio; + }; + + struct bcma_chipinfo chipinfo; + + struct bcma_device *mapped_core; + struct list_head cores; + u8 nr_cores; + + struct bcma_drv_cc drv_cc; + struct bcma_drv_pci drv_pci; +}; + +extern inline u32 bcma_read8(struct bcma_device *core, u16 offset) +{ + return core->bus->ops->read8(core, offset); +} +extern inline u32 bcma_read16(struct bcma_device *core, u16 offset) +{ + return core->bus->ops->read16(core, offset); +} +extern inline u32 bcma_read32(struct bcma_device *core, u16 offset) +{ + return core->bus->ops->read32(core, offset); +} +extern inline +void bcma_write8(struct bcma_device *core, u16 offset, u32 value) +{ + core->bus->ops->write8(core, offset, value); +} +extern inline +void bcma_write16(struct bcma_device *core, u16 offset, u32 value) +{ + core->bus->ops->write16(core, offset, value); +} +extern inline +void bcma_write32(struct bcma_device *core, u16 offset, u32 value) +{ + core->bus->ops->write32(core, offset, value); +} +extern inline u32 bcma_aread32(struct bcma_device *core, u16 offset) +{ + return core->bus->ops->aread32(core, offset); +} +extern inline +void bcma_awrite32(struct bcma_device *core, u16 offset, u32 value) +{ + core->bus->ops->awrite32(core, offset, value); +} + +extern bool bcma_core_is_enabled(struct bcma_device *core); +extern int bcma_core_enable(struct bcma_device *core, u32 flags); + +#endif /* LINUX_BCMA_H_ */ diff --git a/include/linux/bcma/bcma_driver_chipcommon.h b/include/linux/bcma/bcma_driver_chipcommon.h new file mode 100644 index 000000000000..083c3b6cd5ce --- /dev/null +++ b/include/linux/bcma/bcma_driver_chipcommon.h @@ -0,0 +1,302 @@ +#ifndef LINUX_BCMA_DRIVER_CC_H_ +#define LINUX_BCMA_DRIVER_CC_H_ + +/** ChipCommon core registers. **/ +#define BCMA_CC_ID 0x0000 +#define BCMA_CC_ID_ID 0x0000FFFF +#define BCMA_CC_ID_ID_SHIFT 0 +#define BCMA_CC_ID_REV 0x000F0000 +#define BCMA_CC_ID_REV_SHIFT 16 +#define BCMA_CC_ID_PKG 0x00F00000 +#define BCMA_CC_ID_PKG_SHIFT 20 +#define BCMA_CC_ID_NRCORES 0x0F000000 +#define BCMA_CC_ID_NRCORES_SHIFT 24 +#define BCMA_CC_ID_TYPE 0xF0000000 +#define BCMA_CC_ID_TYPE_SHIFT 28 +#define BCMA_CC_CAP 0x0004 /* Capabilities */ +#define BCMA_CC_CAP_NRUART 0x00000003 /* # of UARTs */ +#define BCMA_CC_CAP_MIPSEB 0x00000004 /* MIPS in BigEndian Mode */ +#define BCMA_CC_CAP_UARTCLK 0x00000018 /* UART clock select */ +#define BCMA_CC_CAP_UARTCLK_INT 0x00000008 /* UARTs are driven by internal divided clock */ +#define BCMA_CC_CAP_UARTGPIO 0x00000020 /* UARTs on GPIO 15-12 */ +#define BCMA_CC_CAP_EXTBUS 0x000000C0 /* External buses present */ +#define BCMA_CC_CAP_FLASHT 0x00000700 /* Flash Type */ +#define BCMA_CC_FLASHT_NONE 0x00000000 /* No flash */ +#define BCMA_CC_FLASHT_STSER 0x00000100 /* ST serial flash */ +#define BCMA_CC_FLASHT_ATSER 0x00000200 /* Atmel serial flash */ +#define BCMA_CC_FLASHT_PARA 0x00000700 /* Parallel flash */ +#define BCMA_CC_CAP_PLLT 0x00038000 /* PLL Type */ +#define BCMA_PLLTYPE_NONE 0x00000000 +#define BCMA_PLLTYPE_1 0x00010000 /* 48Mhz base, 3 dividers */ +#define BCMA_PLLTYPE_2 0x00020000 /* 48Mhz, 4 dividers */ +#define BCMA_PLLTYPE_3 0x00030000 /* 25Mhz, 2 dividers */ +#define BCMA_PLLTYPE_4 0x00008000 /* 48Mhz, 4 dividers */ +#define BCMA_PLLTYPE_5 0x00018000 /* 25Mhz, 4 dividers */ +#define BCMA_PLLTYPE_6 0x00028000 /* 100/200 or 120/240 only */ +#define BCMA_PLLTYPE_7 0x00038000 /* 25Mhz, 4 dividers */ +#define BCMA_CC_CAP_PCTL 0x00040000 /* Power Control */ +#define BCMA_CC_CAP_OTPS 0x00380000 /* OTP size */ +#define BCMA_CC_CAP_OTPS_SHIFT 19 +#define BCMA_CC_CAP_OTPS_BASE 5 +#define BCMA_CC_CAP_JTAGM 0x00400000 /* JTAG master present */ +#define BCMA_CC_CAP_BROM 0x00800000 /* Internal boot ROM active */ +#define BCMA_CC_CAP_64BIT 0x08000000 /* 64-bit Backplane */ +#define BCMA_CC_CAP_PMU 0x10000000 /* PMU available (rev >= 20) */ +#define BCMA_CC_CAP_ECI 0x20000000 /* ECI available (rev >= 20) */ +#define BCMA_CC_CAP_SPROM 0x40000000 /* SPROM present */ +#define BCMA_CC_CORECTL 0x0008 +#define BCMA_CC_CORECTL_UARTCLK0 0x00000001 /* Drive UART with internal clock */ +#define BCMA_CC_CORECTL_SE 0x00000002 /* sync clk out enable (corerev >= 3) */ +#define BCMA_CC_CORECTL_UARTCLKEN 0x00000008 /* UART clock enable (rev >= 21) */ +#define BCMA_CC_BIST 0x000C +#define BCMA_CC_OTPS 0x0010 /* OTP status */ +#define BCMA_CC_OTPS_PROGFAIL 0x80000000 +#define BCMA_CC_OTPS_PROTECT 0x00000007 +#define BCMA_CC_OTPS_HW_PROTECT 0x00000001 +#define BCMA_CC_OTPS_SW_PROTECT 0x00000002 +#define BCMA_CC_OTPS_CID_PROTECT 0x00000004 +#define BCMA_CC_OTPC 0x0014 /* OTP control */ +#define BCMA_CC_OTPC_RECWAIT 0xFF000000 +#define BCMA_CC_OTPC_PROGWAIT 0x00FFFF00 +#define BCMA_CC_OTPC_PRW_SHIFT 8 +#define BCMA_CC_OTPC_MAXFAIL 0x00000038 +#define BCMA_CC_OTPC_VSEL 0x00000006 +#define BCMA_CC_OTPC_SELVL 0x00000001 +#define BCMA_CC_OTPP 0x0018 /* OTP prog */ +#define BCMA_CC_OTPP_COL 0x000000FF +#define BCMA_CC_OTPP_ROW 0x0000FF00 +#define BCMA_CC_OTPP_ROW_SHIFT 8 +#define BCMA_CC_OTPP_READERR 0x10000000 +#define BCMA_CC_OTPP_VALUE 0x20000000 +#define BCMA_CC_OTPP_READ 0x40000000 +#define BCMA_CC_OTPP_START 0x80000000 +#define BCMA_CC_OTPP_BUSY 0x80000000 +#define BCMA_CC_IRQSTAT 0x0020 +#define BCMA_CC_IRQMASK 0x0024 +#define BCMA_CC_IRQ_GPIO 0x00000001 /* gpio intr */ +#define BCMA_CC_IRQ_EXT 0x00000002 /* ro: ext intr pin (corerev >= 3) */ +#define BCMA_CC_IRQ_WDRESET 0x80000000 /* watchdog reset occurred */ +#define BCMA_CC_CHIPCTL 0x0028 /* Rev >= 11 only */ +#define BCMA_CC_CHIPSTAT 0x002C /* Rev >= 11 only */ +#define BCMA_CC_JCMD 0x0030 /* Rev >= 10 only */ +#define BCMA_CC_JCMD_START 0x80000000 +#define BCMA_CC_JCMD_BUSY 0x80000000 +#define BCMA_CC_JCMD_PAUSE 0x40000000 +#define BCMA_CC_JCMD0_ACC_MASK 0x0000F000 +#define BCMA_CC_JCMD0_ACC_IRDR 0x00000000 +#define BCMA_CC_JCMD0_ACC_DR 0x00001000 +#define BCMA_CC_JCMD0_ACC_IR 0x00002000 +#define BCMA_CC_JCMD0_ACC_RESET 0x00003000 +#define BCMA_CC_JCMD0_ACC_IRPDR 0x00004000 +#define BCMA_CC_JCMD0_ACC_PDR 0x00005000 +#define BCMA_CC_JCMD0_IRW_MASK 0x00000F00 +#define BCMA_CC_JCMD_ACC_MASK 0x000F0000 /* Changes for corerev 11 */ +#define BCMA_CC_JCMD_ACC_IRDR 0x00000000 +#define BCMA_CC_JCMD_ACC_DR 0x00010000 +#define BCMA_CC_JCMD_ACC_IR 0x00020000 +#define BCMA_CC_JCMD_ACC_RESET 0x00030000 +#define BCMA_CC_JCMD_ACC_IRPDR 0x00040000 +#define BCMA_CC_JCMD_ACC_PDR 0x00050000 +#define BCMA_CC_JCMD_IRW_MASK 0x00001F00 +#define BCMA_CC_JCMD_IRW_SHIFT 8 +#define BCMA_CC_JCMD_DRW_MASK 0x0000003F +#define BCMA_CC_JIR 0x0034 /* Rev >= 10 only */ +#define BCMA_CC_JDR 0x0038 /* Rev >= 10 only */ +#define BCMA_CC_JCTL 0x003C /* Rev >= 10 only */ +#define BCMA_CC_JCTL_FORCE_CLK 4 /* Force clock */ +#define BCMA_CC_JCTL_EXT_EN 2 /* Enable external targets */ +#define BCMA_CC_JCTL_EN 1 /* Enable Jtag master */ +#define BCMA_CC_FLASHCTL 0x0040 +#define BCMA_CC_FLASHCTL_START 0x80000000 +#define BCMA_CC_FLASHCTL_BUSY BCMA_CC_FLASHCTL_START +#define BCMA_CC_FLASHADDR 0x0044 +#define BCMA_CC_FLASHDATA 0x0048 +#define BCMA_CC_BCAST_ADDR 0x0050 +#define BCMA_CC_BCAST_DATA 0x0054 +#define BCMA_CC_GPIOPULLUP 0x0058 /* Rev >= 20 only */ +#define BCMA_CC_GPIOPULLDOWN 0x005C /* Rev >= 20 only */ +#define BCMA_CC_GPIOIN 0x0060 +#define BCMA_CC_GPIOOUT 0x0064 +#define BCMA_CC_GPIOOUTEN 0x0068 +#define BCMA_CC_GPIOCTL 0x006C +#define BCMA_CC_GPIOPOL 0x0070 +#define BCMA_CC_GPIOIRQ 0x0074 +#define BCMA_CC_WATCHDOG 0x0080 +#define BCMA_CC_GPIOTIMER 0x0088 /* LED powersave (corerev >= 16) */ +#define BCMA_CC_GPIOTIMER_OFFTIME 0x0000FFFF +#define BCMA_CC_GPIOTIMER_OFFTIME_SHIFT 0 +#define BCMA_CC_GPIOTIMER_ONTIME 0xFFFF0000 +#define BCMA_CC_GPIOTIMER_ONTIME_SHIFT 16 +#define BCMA_CC_GPIOTOUTM 0x008C /* LED powersave (corerev >= 16) */ +#define BCMA_CC_CLOCK_N 0x0090 +#define BCMA_CC_CLOCK_SB 0x0094 +#define BCMA_CC_CLOCK_PCI 0x0098 +#define BCMA_CC_CLOCK_M2 0x009C +#define BCMA_CC_CLOCK_MIPS 0x00A0 +#define BCMA_CC_CLKDIV 0x00A4 /* Rev >= 3 only */ +#define BCMA_CC_CLKDIV_SFLASH 0x0F000000 +#define BCMA_CC_CLKDIV_SFLASH_SHIFT 24 +#define BCMA_CC_CLKDIV_OTP 0x000F0000 +#define BCMA_CC_CLKDIV_OTP_SHIFT 16 +#define BCMA_CC_CLKDIV_JTAG 0x00000F00 +#define BCMA_CC_CLKDIV_JTAG_SHIFT 8 +#define BCMA_CC_CLKDIV_UART 0x000000FF +#define BCMA_CC_CAP_EXT 0x00AC /* Capabilities */ +#define BCMA_CC_PLLONDELAY 0x00B0 /* Rev >= 4 only */ +#define BCMA_CC_FREFSELDELAY 0x00B4 /* Rev >= 4 only */ +#define BCMA_CC_SLOWCLKCTL 0x00B8 /* 6 <= Rev <= 9 only */ +#define BCMA_CC_SLOWCLKCTL_SRC 0x00000007 /* slow clock source mask */ +#define BCMA_CC_SLOWCLKCTL_SRC_LPO 0x00000000 /* source of slow clock is LPO */ +#define BCMA_CC_SLOWCLKCTL_SRC_XTAL 0x00000001 /* source of slow clock is crystal */ +#define BCMA_CC_SLOECLKCTL_SRC_PCI 0x00000002 /* source of slow clock is PCI */ +#define BCMA_CC_SLOWCLKCTL_LPOFREQ 0x00000200 /* LPOFreqSel, 1: 160Khz, 0: 32KHz */ +#define BCMA_CC_SLOWCLKCTL_LPOPD 0x00000400 /* LPOPowerDown, 1: LPO is disabled, 0: LPO is enabled */ +#define BCMA_CC_SLOWCLKCTL_FSLOW 0x00000800 /* ForceSlowClk, 1: sb/cores running on slow clock, 0: power logic control */ +#define BCMA_CC_SLOWCLKCTL_IPLL 0x00001000 /* IgnorePllOffReq, 1/0: power logic ignores/honors PLL clock disable requests from core */ +#define BCMA_CC_SLOWCLKCTL_ENXTAL 0x00002000 /* XtalControlEn, 1/0: power logic does/doesn't disable crystal when appropriate */ +#define BCMA_CC_SLOWCLKCTL_XTALPU 0x00004000 /* XtalPU (RO), 1/0: crystal running/disabled */ +#define BCMA_CC_SLOWCLKCTL_CLKDIV 0xFFFF0000 /* ClockDivider (SlowClk = 1/(4+divisor)) */ +#define BCMA_CC_SLOWCLKCTL_CLKDIV_SHIFT 16 +#define BCMA_CC_SYSCLKCTL 0x00C0 /* Rev >= 3 only */ +#define BCMA_CC_SYSCLKCTL_IDLPEN 0x00000001 /* ILPen: Enable Idle Low Power */ +#define BCMA_CC_SYSCLKCTL_ALPEN 0x00000002 /* ALPen: Enable Active Low Power */ +#define BCMA_CC_SYSCLKCTL_PLLEN 0x00000004 /* ForcePLLOn */ +#define BCMA_CC_SYSCLKCTL_FORCEALP 0x00000008 /* Force ALP (or HT if ALPen is not set */ +#define BCMA_CC_SYSCLKCTL_FORCEHT 0x00000010 /* Force HT */ +#define BCMA_CC_SYSCLKCTL_CLKDIV 0xFFFF0000 /* ClkDiv (ILP = 1/(4+divisor)) */ +#define BCMA_CC_SYSCLKCTL_CLKDIV_SHIFT 16 +#define BCMA_CC_CLKSTSTR 0x00C4 /* Rev >= 3 only */ +#define BCMA_CC_EROM 0x00FC +#define BCMA_CC_PCMCIA_CFG 0x0100 +#define BCMA_CC_PCMCIA_MEMWAIT 0x0104 +#define BCMA_CC_PCMCIA_ATTRWAIT 0x0108 +#define BCMA_CC_PCMCIA_IOWAIT 0x010C +#define BCMA_CC_IDE_CFG 0x0110 +#define BCMA_CC_IDE_MEMWAIT 0x0114 +#define BCMA_CC_IDE_ATTRWAIT 0x0118 +#define BCMA_CC_IDE_IOWAIT 0x011C +#define BCMA_CC_PROG_CFG 0x0120 +#define BCMA_CC_PROG_WAITCNT 0x0124 +#define BCMA_CC_FLASH_CFG 0x0128 +#define BCMA_CC_FLASH_WAITCNT 0x012C +#define BCMA_CC_CLKCTLST 0x01E0 /* Clock control and status (rev >= 20) */ +#define BCMA_CC_CLKCTLST_FORCEALP 0x00000001 /* Force ALP request */ +#define BCMA_CC_CLKCTLST_FORCEHT 0x00000002 /* Force HT request */ +#define BCMA_CC_CLKCTLST_FORCEILP 0x00000004 /* Force ILP request */ +#define BCMA_CC_CLKCTLST_HAVEALPREQ 0x00000008 /* ALP available request */ +#define BCMA_CC_CLKCTLST_HAVEHTREQ 0x00000010 /* HT available request */ +#define BCMA_CC_CLKCTLST_HWCROFF 0x00000020 /* Force HW clock request off */ +#define BCMA_CC_CLKCTLST_HAVEHT 0x00010000 /* HT available */ +#define BCMA_CC_CLKCTLST_HAVEALP 0x00020000 /* APL available */ +#define BCMA_CC_HW_WORKAROUND 0x01E4 /* Hardware workaround (rev >= 20) */ +#define BCMA_CC_UART0_DATA 0x0300 +#define BCMA_CC_UART0_IMR 0x0304 +#define BCMA_CC_UART0_FCR 0x0308 +#define BCMA_CC_UART0_LCR 0x030C +#define BCMA_CC_UART0_MCR 0x0310 +#define BCMA_CC_UART0_LSR 0x0314 +#define BCMA_CC_UART0_MSR 0x0318 +#define BCMA_CC_UART0_SCRATCH 0x031C +#define BCMA_CC_UART1_DATA 0x0400 +#define BCMA_CC_UART1_IMR 0x0404 +#define BCMA_CC_UART1_FCR 0x0408 +#define BCMA_CC_UART1_LCR 0x040C +#define BCMA_CC_UART1_MCR 0x0410 +#define BCMA_CC_UART1_LSR 0x0414 +#define BCMA_CC_UART1_MSR 0x0418 +#define BCMA_CC_UART1_SCRATCH 0x041C +/* PMU registers (rev >= 20) */ +#define BCMA_CC_PMU_CTL 0x0600 /* PMU control */ +#define BCMA_CC_PMU_CTL_ILP_DIV 0xFFFF0000 /* ILP div mask */ +#define BCMA_CC_PMU_CTL_ILP_DIV_SHIFT 16 +#define BCMA_CC_PMU_CTL_NOILPONW 0x00000200 /* No ILP on wait */ +#define BCMA_CC_PMU_CTL_HTREQEN 0x00000100 /* HT req enable */ +#define BCMA_CC_PMU_CTL_ALPREQEN 0x00000080 /* ALP req enable */ +#define BCMA_CC_PMU_CTL_XTALFREQ 0x0000007C /* Crystal freq */ +#define BCMA_CC_PMU_CTL_XTALFREQ_SHIFT 2 +#define BCMA_CC_PMU_CTL_ILPDIVEN 0x00000002 /* ILP div enable */ +#define BCMA_CC_PMU_CTL_LPOSEL 0x00000001 /* LPO sel */ +#define BCMA_CC_PMU_CAP 0x0604 /* PMU capabilities */ +#define BCMA_CC_PMU_CAP_REVISION 0x000000FF /* Revision mask */ +#define BCMA_CC_PMU_STAT 0x0608 /* PMU status */ +#define BCMA_CC_PMU_STAT_INTPEND 0x00000040 /* Interrupt pending */ +#define BCMA_CC_PMU_STAT_SBCLKST 0x00000030 /* Backplane clock status? */ +#define BCMA_CC_PMU_STAT_HAVEALP 0x00000008 /* ALP available */ +#define BCMA_CC_PMU_STAT_HAVEHT 0x00000004 /* HT available */ +#define BCMA_CC_PMU_STAT_RESINIT 0x00000003 /* Res init */ +#define BCMA_CC_PMU_RES_STAT 0x060C /* PMU res status */ +#define BCMA_CC_PMU_RES_PEND 0x0610 /* PMU res pending */ +#define BCMA_CC_PMU_TIMER 0x0614 /* PMU timer */ +#define BCMA_CC_PMU_MINRES_MSK 0x0618 /* PMU min res mask */ +#define BCMA_CC_PMU_MAXRES_MSK 0x061C /* PMU max res mask */ +#define BCMA_CC_PMU_RES_TABSEL 0x0620 /* PMU res table sel */ +#define BCMA_CC_PMU_RES_DEPMSK 0x0624 /* PMU res dep mask */ +#define BCMA_CC_PMU_RES_UPDNTM 0x0628 /* PMU res updown timer */ +#define BCMA_CC_PMU_RES_TIMER 0x062C /* PMU res timer */ +#define BCMA_CC_PMU_CLKSTRETCH 0x0630 /* PMU clockstretch */ +#define BCMA_CC_PMU_WATCHDOG 0x0634 /* PMU watchdog */ +#define BCMA_CC_PMU_RES_REQTS 0x0640 /* PMU res req timer sel */ +#define BCMA_CC_PMU_RES_REQT 0x0644 /* PMU res req timer */ +#define BCMA_CC_PMU_RES_REQM 0x0648 /* PMU res req mask */ +#define BCMA_CC_CHIPCTL_ADDR 0x0650 +#define BCMA_CC_CHIPCTL_DATA 0x0654 +#define BCMA_CC_REGCTL_ADDR 0x0658 +#define BCMA_CC_REGCTL_DATA 0x065C +#define BCMA_CC_PLLCTL_ADDR 0x0660 +#define BCMA_CC_PLLCTL_DATA 0x0664 + +/* Data for the PMU, if available. + * Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU) + */ +struct bcma_chipcommon_pmu { + u8 rev; /* PMU revision */ + u32 crystalfreq; /* The active crystal frequency (in kHz) */ +}; + +struct bcma_drv_cc { + struct bcma_device *core; + u32 status; + u32 capabilities; + u32 capabilities_ext; + /* Fast Powerup Delay constant */ + u16 fast_pwrup_delay; + struct bcma_chipcommon_pmu pmu; +}; + +/* Register access */ +#define bcma_cc_read32(cc, offset) \ + bcma_read32((cc)->core, offset) +#define bcma_cc_write32(cc, offset, val) \ + bcma_write32((cc)->core, offset, val) + +#define bcma_cc_mask32(cc, offset, mask) \ + bcma_cc_write32(cc, offset, bcma_cc_read32(cc, offset) & (mask)) +#define bcma_cc_set32(cc, offset, set) \ + bcma_cc_write32(cc, offset, bcma_cc_read32(cc, offset) | (set)) +#define bcma_cc_maskset32(cc, offset, mask, set) \ + bcma_cc_write32(cc, offset, (bcma_cc_read32(cc, offset) & (mask)) | (set)) + +extern void bcma_core_chipcommon_init(struct bcma_drv_cc *cc); + +extern void bcma_chipco_suspend(struct bcma_drv_cc *cc); +extern void bcma_chipco_resume(struct bcma_drv_cc *cc); + +extern void bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc, + u32 ticks); + +void bcma_chipco_irq_mask(struct bcma_drv_cc *cc, u32 mask, u32 value); + +u32 bcma_chipco_irq_status(struct bcma_drv_cc *cc, u32 mask); + +/* Chipcommon GPIO pin access. */ +u32 bcma_chipco_gpio_in(struct bcma_drv_cc *cc, u32 mask); +u32 bcma_chipco_gpio_out(struct bcma_drv_cc *cc, u32 mask, u32 value); +u32 bcma_chipco_gpio_outen(struct bcma_drv_cc *cc, u32 mask, u32 value); +u32 bcma_chipco_gpio_control(struct bcma_drv_cc *cc, u32 mask, u32 value); +u32 bcma_chipco_gpio_intmask(struct bcma_drv_cc *cc, u32 mask, u32 value); +u32 bcma_chipco_gpio_polarity(struct bcma_drv_cc *cc, u32 mask, u32 value); + +/* PMU support */ +extern void bcma_pmu_init(struct bcma_drv_cc *cc); + +#endif /* LINUX_BCMA_DRIVER_CC_H_ */ diff --git a/include/linux/bcma/bcma_driver_pci.h b/include/linux/bcma/bcma_driver_pci.h new file mode 100644 index 000000000000..b7e191cf00ec --- /dev/null +++ b/include/linux/bcma/bcma_driver_pci.h @@ -0,0 +1,89 @@ +#ifndef LINUX_BCMA_DRIVER_PCI_H_ +#define LINUX_BCMA_DRIVER_PCI_H_ + +#include <linux/types.h> + +struct pci_dev; + +/** PCI core registers. **/ +#define BCMA_CORE_PCI_CTL 0x0000 /* PCI Control */ +#define BCMA_CORE_PCI_CTL_RST_OE 0x00000001 /* PCI_RESET Output Enable */ +#define BCMA_CORE_PCI_CTL_RST 0x00000002 /* PCI_RESET driven out to pin */ +#define BCMA_CORE_PCI_CTL_CLK_OE 0x00000004 /* Clock gate Output Enable */ +#define BCMA_CORE_PCI_CTL_CLK 0x00000008 /* Gate for clock driven out to pin */ +#define BCMA_CORE_PCI_ARBCTL 0x0010 /* PCI Arbiter Control */ +#define BCMA_CORE_PCI_ARBCTL_INTERN 0x00000001 /* Use internal arbiter */ +#define BCMA_CORE_PCI_ARBCTL_EXTERN 0x00000002 /* Use external arbiter */ +#define BCMA_CORE_PCI_ARBCTL_PARKID 0x00000006 /* Mask, selects which agent is parked on an idle bus */ +#define BCMA_CORE_PCI_ARBCTL_PARKID_LAST 0x00000000 /* Last requestor */ +#define BCMA_CORE_PCI_ARBCTL_PARKID_4710 0x00000002 /* 4710 */ +#define BCMA_CORE_PCI_ARBCTL_PARKID_EXT0 0x00000004 /* External requestor 0 */ +#define BCMA_CORE_PCI_ARBCTL_PARKID_EXT1 0x00000006 /* External requestor 1 */ +#define BCMA_CORE_PCI_ISTAT 0x0020 /* Interrupt status */ +#define BCMA_CORE_PCI_ISTAT_INTA 0x00000001 /* PCI INTA# */ +#define BCMA_CORE_PCI_ISTAT_INTB 0x00000002 /* PCI INTB# */ +#define BCMA_CORE_PCI_ISTAT_SERR 0x00000004 /* PCI SERR# (write to clear) */ +#define BCMA_CORE_PCI_ISTAT_PERR 0x00000008 /* PCI PERR# (write to clear) */ +#define BCMA_CORE_PCI_ISTAT_PME 0x00000010 /* PCI PME# */ +#define BCMA_CORE_PCI_IMASK 0x0024 /* Interrupt mask */ +#define BCMA_CORE_PCI_IMASK_INTA 0x00000001 /* PCI INTA# */ +#define BCMA_CORE_PCI_IMASK_INTB 0x00000002 /* PCI INTB# */ +#define BCMA_CORE_PCI_IMASK_SERR 0x00000004 /* PCI SERR# */ +#define BCMA_CORE_PCI_IMASK_PERR 0x00000008 /* PCI PERR# */ +#define BCMA_CORE_PCI_IMASK_PME 0x00000010 /* PCI PME# */ +#define BCMA_CORE_PCI_MBOX 0x0028 /* Backplane to PCI Mailbox */ +#define BCMA_CORE_PCI_MBOX_F0_0 0x00000100 /* PCI function 0, INT 0 */ +#define BCMA_CORE_PCI_MBOX_F0_1 0x00000200 /* PCI function 0, INT 1 */ +#define BCMA_CORE_PCI_MBOX_F1_0 0x00000400 /* PCI function 1, INT 0 */ +#define BCMA_CORE_PCI_MBOX_F1_1 0x00000800 /* PCI function 1, INT 1 */ +#define BCMA_CORE_PCI_MBOX_F2_0 0x00001000 /* PCI function 2, INT 0 */ +#define BCMA_CORE_PCI_MBOX_F2_1 0x00002000 /* PCI function 2, INT 1 */ +#define BCMA_CORE_PCI_MBOX_F3_0 0x00004000 /* PCI function 3, INT 0 */ +#define BCMA_CORE_PCI_MBOX_F3_1 0x00008000 /* PCI function 3, INT 1 */ +#define BCMA_CORE_PCI_BCAST_ADDR 0x0050 /* Backplane Broadcast Address */ +#define BCMA_CORE_PCI_BCAST_ADDR_MASK 0x000000FF +#define BCMA_CORE_PCI_BCAST_DATA 0x0054 /* Backplane Broadcast Data */ +#define BCMA_CORE_PCI_GPIO_IN 0x0060 /* rev >= 2 only */ +#define BCMA_CORE_PCI_GPIO_OUT 0x0064 /* rev >= 2 only */ +#define BCMA_CORE_PCI_GPIO_ENABLE 0x0068 /* rev >= 2 only */ +#define BCMA_CORE_PCI_GPIO_CTL 0x006C /* rev >= 2 only */ +#define BCMA_CORE_PCI_SBTOPCI0 0x0100 /* Backplane to PCI translation 0 (sbtopci0) */ +#define BCMA_CORE_PCI_SBTOPCI0_MASK 0xFC000000 +#define BCMA_CORE_PCI_SBTOPCI1 0x0104 /* Backplane to PCI translation 1 (sbtopci1) */ +#define BCMA_CORE_PCI_SBTOPCI1_MASK 0xFC000000 +#define BCMA_CORE_PCI_SBTOPCI2 0x0108 /* Backplane to PCI translation 2 (sbtopci2) */ +#define BCMA_CORE_PCI_SBTOPCI2_MASK 0xC0000000 +#define BCMA_CORE_PCI_PCICFG0 0x0400 /* PCI config space 0 (rev >= 8) */ +#define BCMA_CORE_PCI_PCICFG1 0x0500 /* PCI config space 1 (rev >= 8) */ +#define BCMA_CORE_PCI_PCICFG2 0x0600 /* PCI config space 2 (rev >= 8) */ +#define BCMA_CORE_PCI_PCICFG3 0x0700 /* PCI config space 3 (rev >= 8) */ +#define BCMA_CORE_PCI_SPROM(wordoffset) (0x0800 + ((wordoffset) * 2)) /* SPROM shadow area (72 bytes) */ + +/* SBtoPCIx */ +#define BCMA_CORE_PCI_SBTOPCI_MEM 0x00000000 +#define BCMA_CORE_PCI_SBTOPCI_IO 0x00000001 +#define BCMA_CORE_PCI_SBTOPCI_CFG0 0x00000002 +#define BCMA_CORE_PCI_SBTOPCI_CFG1 0x00000003 +#define BCMA_CORE_PCI_SBTOPCI_PREF 0x00000004 /* Prefetch enable */ +#define BCMA_CORE_PCI_SBTOPCI_BURST 0x00000008 /* Burst enable */ +#define BCMA_CORE_PCI_SBTOPCI_MRM 0x00000020 /* Memory Read Multiple */ +#define BCMA_CORE_PCI_SBTOPCI_RC 0x00000030 /* Read Command mask (rev >= 11) */ +#define BCMA_CORE_PCI_SBTOPCI_RC_READ 0x00000000 /* Memory read */ +#define BCMA_CORE_PCI_SBTOPCI_RC_READL 0x00000010 /* Memory read line */ +#define BCMA_CORE_PCI_SBTOPCI_RC_READM 0x00000020 /* Memory read multiple */ + +/* PCIcore specific boardflags */ +#define BCMA_CORE_PCI_BFL_NOPCI 0x00000400 /* Board leaves PCI floating */ + +struct bcma_drv_pci { + struct bcma_device *core; + u8 setup_done:1; +}; + +/* Register access */ +#define pcicore_read32(pc, offset) bcma_read32((pc)->core, offset) +#define pcicore_write32(pc, offset, val) bcma_write32((pc)->core, offset, val) + +extern void bcma_core_pci_init(struct bcma_drv_pci *pc); + +#endif /* LINUX_BCMA_DRIVER_PCI_H_ */ diff --git a/include/linux/bcma/bcma_regs.h b/include/linux/bcma/bcma_regs.h new file mode 100644 index 000000000000..f82d88a960ce --- /dev/null +++ b/include/linux/bcma/bcma_regs.h @@ -0,0 +1,34 @@ +#ifndef LINUX_BCMA_REGS_H_ +#define LINUX_BCMA_REGS_H_ + +/* Agent registers (common for every core) */ +#define BCMA_IOCTL 0x0408 +#define BCMA_IOCTL_CLK 0x0001 +#define BCMA_IOCTL_FGC 0x0002 +#define BCMA_IOCTL_CORE_BITS 0x3FFC +#define BCMA_IOCTL_PME_EN 0x4000 +#define BCMA_IOCTL_BIST_EN 0x8000 +#define BCMA_RESET_CTL 0x0800 +#define BCMA_RESET_CTL_RESET 0x0001 + +/* BCMA PCI config space registers. */ +#define BCMA_PCI_PMCSR 0x44 +#define BCMA_PCI_PE 0x100 +#define BCMA_PCI_BAR0_WIN 0x80 /* Backplane address space 0 */ +#define BCMA_PCI_BAR1_WIN 0x84 /* Backplane address space 1 */ +#define BCMA_PCI_SPROMCTL 0x88 /* SPROM control */ +#define BCMA_PCI_SPROMCTL_WE 0x10 /* SPROM write enable */ +#define BCMA_PCI_BAR1_CONTROL 0x8c /* Address space 1 burst control */ +#define BCMA_PCI_IRQS 0x90 /* PCI interrupts */ +#define BCMA_PCI_IRQMASK 0x94 /* PCI IRQ control and mask (pcirev >= 6 only) */ +#define BCMA_PCI_BACKPLANE_IRQS 0x98 /* Backplane Interrupts */ +#define BCMA_PCI_BAR0_WIN2 0xAC +#define BCMA_PCI_GPIO_IN 0xB0 /* GPIO Input (pcirev >= 3 only) */ +#define BCMA_PCI_GPIO_OUT 0xB4 /* GPIO Output (pcirev >= 3 only) */ +#define BCMA_PCI_GPIO_OUT_ENABLE 0xB8 /* GPIO Output Enable/Disable (pcirev >= 3 only) */ +#define BCMA_PCI_GPIO_SCS 0x10 /* PCI config space bit 4 for 4306c0 slow clock source */ +#define BCMA_PCI_GPIO_HWRAD 0x20 /* PCI config space GPIO 13 for hw radio disable */ +#define BCMA_PCI_GPIO_XTAL 0x40 /* PCI config space GPIO 14 for Xtal powerup */ +#define BCMA_PCI_GPIO_PLL 0x80 /* PCI config space GPIO 15 for PLL powerdown */ + +#endif /* LINUX_BCMA_REGS_H_ */ diff --git a/include/linux/bit_spinlock.h b/include/linux/bit_spinlock.h index e612575a2596..b4326bfa684f 100644 --- a/include/linux/bit_spinlock.h +++ b/include/linux/bit_spinlock.h @@ -23,11 +23,11 @@ static inline void bit_spin_lock(int bitnum, unsigned long *addr) preempt_disable(); #if defined(CONFIG_SMP) || defined(CONFIG_DEBUG_SPINLOCK) while (unlikely(test_and_set_bit_lock(bitnum, addr))) { - while (test_bit(bitnum, addr)) { - preempt_enable(); + preempt_enable(); + do { cpu_relax(); - preempt_disable(); - } + } while (test_bit(bitnum, addr)); + preempt_disable(); } #endif __acquire(bitlock); diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 16a902f099ac..2ad95fa1d130 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -388,20 +388,19 @@ struct request_queue #define QUEUE_FLAG_SYNCFULL 3 /* read queue has been filled */ #define QUEUE_FLAG_ASYNCFULL 4 /* write queue has been filled */ #define QUEUE_FLAG_DEAD 5 /* queue being torn down */ -#define QUEUE_FLAG_REENTER 6 /* Re-entrancy avoidance */ -#define QUEUE_FLAG_ELVSWITCH 7 /* don't use elevator, just do FIFO */ -#define QUEUE_FLAG_BIDI 8 /* queue supports bidi requests */ -#define QUEUE_FLAG_NOMERGES 9 /* disable merge attempts */ -#define QUEUE_FLAG_SAME_COMP 10 /* force complete on same CPU */ -#define QUEUE_FLAG_FAIL_IO 11 /* fake timeout */ -#define QUEUE_FLAG_STACKABLE 12 /* supports request stacking */ -#define QUEUE_FLAG_NONROT 13 /* non-rotational device (SSD) */ +#define QUEUE_FLAG_ELVSWITCH 6 /* don't use elevator, just do FIFO */ +#define QUEUE_FLAG_BIDI 7 /* queue supports bidi requests */ +#define QUEUE_FLAG_NOMERGES 8 /* disable merge attempts */ +#define QUEUE_FLAG_SAME_COMP 9 /* force complete on same CPU */ +#define QUEUE_FLAG_FAIL_IO 10 /* fake timeout */ +#define QUEUE_FLAG_STACKABLE 11 /* supports request stacking */ +#define QUEUE_FLAG_NONROT 12 /* non-rotational device (SSD) */ #define QUEUE_FLAG_VIRT QUEUE_FLAG_NONROT /* paravirt device */ -#define QUEUE_FLAG_IO_STAT 15 /* do IO stats */ -#define QUEUE_FLAG_DISCARD 16 /* supports DISCARD */ -#define QUEUE_FLAG_NOXMERGES 17 /* No extended merges */ -#define QUEUE_FLAG_ADD_RANDOM 18 /* Contributes to random pool */ -#define QUEUE_FLAG_SECDISCARD 19 /* supports SECDISCARD */ +#define QUEUE_FLAG_IO_STAT 13 /* do IO stats */ +#define QUEUE_FLAG_DISCARD 14 /* supports DISCARD */ +#define QUEUE_FLAG_NOXMERGES 15 /* No extended merges */ +#define QUEUE_FLAG_ADD_RANDOM 16 /* Contributes to random pool */ +#define QUEUE_FLAG_SECDISCARD 17 /* supports SECDISCARD */ #define QUEUE_FLAG_DEFAULT ((1 << QUEUE_FLAG_IO_STAT) | \ (1 << QUEUE_FLAG_STACKABLE) | \ @@ -697,8 +696,9 @@ extern void blk_start_queue(struct request_queue *q); extern void blk_stop_queue(struct request_queue *q); extern void blk_sync_queue(struct request_queue *q); extern void __blk_stop_queue(struct request_queue *q); -extern void __blk_run_queue(struct request_queue *q, bool force_kblockd); +extern void __blk_run_queue(struct request_queue *q); extern void blk_run_queue(struct request_queue *); +extern void blk_run_queue_async(struct request_queue *q); extern int blk_rq_map_user(struct request_queue *, struct request *, struct rq_map_data *, void __user *, unsigned long, gfp_t); @@ -857,26 +857,39 @@ extern void blk_put_queue(struct request_queue *); struct blk_plug { unsigned long magic; struct list_head list; + struct list_head cb_list; unsigned int should_sort; }; +struct blk_plug_cb { + struct list_head list; + void (*callback)(struct blk_plug_cb *); +}; extern void blk_start_plug(struct blk_plug *); extern void blk_finish_plug(struct blk_plug *); -extern void __blk_flush_plug(struct task_struct *, struct blk_plug *); +extern void blk_flush_plug_list(struct blk_plug *, bool); static inline void blk_flush_plug(struct task_struct *tsk) { struct blk_plug *plug = tsk->plug; - if (unlikely(plug)) - __blk_flush_plug(tsk, plug); + if (plug) + blk_flush_plug_list(plug, false); +} + +static inline void blk_schedule_flush_plug(struct task_struct *tsk) +{ + struct blk_plug *plug = tsk->plug; + + if (plug) + blk_flush_plug_list(plug, true); } static inline bool blk_needs_flush_plug(struct task_struct *tsk) { struct blk_plug *plug = tsk->plug; - return plug && !list_empty(&plug->list); + return plug && (!list_empty(&plug->list) || !list_empty(&plug->cb_list)); } /* @@ -1206,6 +1219,7 @@ struct blk_integrity { struct kobject kobj; }; +extern bool blk_integrity_is_initialized(struct gendisk *); extern int blk_integrity_register(struct gendisk *, struct blk_integrity *); extern void blk_integrity_unregister(struct gendisk *); extern int blk_integrity_compare(struct gendisk *, struct gendisk *); @@ -1262,6 +1276,7 @@ queue_max_integrity_segments(struct request_queue *q) #define queue_max_integrity_segments(a) (0) #define blk_integrity_merge_rq(a, b, c) (0) #define blk_integrity_merge_bio(a, b, c) (0) +#define blk_integrity_is_initialized(a) (0) #endif /* CONFIG_BLK_DEV_INTEGRITY */ @@ -1312,6 +1327,11 @@ static inline void blk_flush_plug(struct task_struct *task) { } +static inline void blk_schedule_flush_plug(struct task_struct *task) +{ +} + + static inline bool blk_needs_flush_plug(struct task_struct *tsk) { return false; diff --git a/include/linux/bootmem.h b/include/linux/bootmem.h index b8613e806aa9..01eca1794e14 100644 --- a/include/linux/bootmem.h +++ b/include/linux/bootmem.h @@ -111,6 +111,8 @@ extern void *__alloc_bootmem_low_node(pg_data_t *pgdat, __alloc_bootmem_nopanic(x, PAGE_SIZE, __pa(MAX_DMA_ADDRESS)) #define alloc_bootmem_node(pgdat, x) \ __alloc_bootmem_node(pgdat, x, SMP_CACHE_BYTES, __pa(MAX_DMA_ADDRESS)) +#define alloc_bootmem_node_nopanic(pgdat, x) \ + __alloc_bootmem_node_nopanic(pgdat, x, SMP_CACHE_BYTES, __pa(MAX_DMA_ADDRESS)) #define alloc_bootmem_pages_node(pgdat, x) \ __alloc_bootmem_node(pgdat, x, PAGE_SIZE, __pa(MAX_DMA_ADDRESS)) #define alloc_bootmem_pages_node_nopanic(pgdat, x) \ diff --git a/include/linux/bsearch.h b/include/linux/bsearch.h new file mode 100644 index 000000000000..90b1aa867224 --- /dev/null +++ b/include/linux/bsearch.h @@ -0,0 +1,9 @@ +#ifndef _LINUX_BSEARCH_H +#define _LINUX_BSEARCH_H + +#include <linux/types.h> + +void *bsearch(const void *key, const void *base, size_t num, size_t size, + int (*cmp)(const void *key, const void *elt)); + +#endif /* _LINUX_BSEARCH_H */ diff --git a/include/linux/can/core.h b/include/linux/can/core.h index 6c507bea275f..5ce6b5d62ecc 100644 --- a/include/linux/can/core.h +++ b/include/linux/can/core.h @@ -36,16 +36,16 @@ * @prot: pointer to struct proto structure. */ struct can_proto { - int type; - int protocol; - struct proto_ops *ops; - struct proto *prot; + int type; + int protocol; + const struct proto_ops *ops; + struct proto *prot; }; /* function prototypes for the CAN networklayer core (af_can.c) */ -extern int can_proto_register(struct can_proto *cp); -extern void can_proto_unregister(struct can_proto *cp); +extern int can_proto_register(const struct can_proto *cp); +extern void can_proto_unregister(const struct can_proto *cp); extern int can_rx_register(struct net_device *dev, canid_t can_id, canid_t mask, @@ -58,5 +58,6 @@ extern void can_rx_unregister(struct net_device *dev, canid_t can_id, void *data); extern int can_send(struct sk_buff *skb, int loop); +extern int can_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg); #endif /* CAN_CORE_H */ diff --git a/include/linux/can/error.h b/include/linux/can/error.h index d4127fd9e681..5958074302a4 100644 --- a/include/linux/can/error.h +++ b/include/linux/can/error.h @@ -51,7 +51,7 @@ #define CAN_ERR_PROT_BIT1 0x10 /* unable to send recessive bit */ #define CAN_ERR_PROT_OVERLOAD 0x20 /* bus overload */ #define CAN_ERR_PROT_ACTIVE 0x40 /* active error announcement */ -#define CAN_ERR_PROT_TX 0x80 /* error occured on transmission */ +#define CAN_ERR_PROT_TX 0x80 /* error occurred on transmission */ /* error in CAN protocol (location) / data[3] */ #define CAN_ERR_PROT_LOC_UNSPEC 0x00 /* unspecified */ diff --git a/include/linux/can/netlink.h b/include/linux/can/netlink.h index 3250de935e1a..34542d374dd8 100644 --- a/include/linux/can/netlink.h +++ b/include/linux/can/netlink.h @@ -17,7 +17,7 @@ /* * CAN bit-timing parameters * - * For futher information, please read chapter "8 BIT TIMING + * For further information, please read chapter "8 BIT TIMING * REQUIREMENTS" of the "Bosch CAN Specification version 2.0" * at http://www.semiconductors.bosch.de/pdf/can2spec.pdf. */ diff --git a/include/linux/can/platform/mcp251x.h b/include/linux/can/platform/mcp251x.h index 8e20540043f5..089fe43211a4 100644 --- a/include/linux/can/platform/mcp251x.h +++ b/include/linux/can/platform/mcp251x.h @@ -12,6 +12,7 @@ /** * struct mcp251x_platform_data - MCP251X SPI CAN controller platform data * @oscillator_frequency: - oscillator frequency in Hz + * @irq_flags: - IRQF configuration flags * @board_specific_setup: - called before probing the chip (power,reset) * @transceiver_enable: - called to power on/off the transceiver * @power_enable: - called to power on/off the mcp *and* the @@ -24,6 +25,7 @@ struct mcp251x_platform_data { unsigned long oscillator_frequency; + unsigned long irq_flags; int (*board_specific_setup)(struct spi_device *spi); int (*transceiver_enable)(int enable); int (*power_enable) (int enable); diff --git a/include/linux/capability.h b/include/linux/capability.h index 16ee8b49a200..4554db0cde86 100644 --- a/include/linux/capability.h +++ b/include/linux/capability.h @@ -355,7 +355,12 @@ struct cpu_vfs_cap_data { #define CAP_SYSLOG 34 -#define CAP_LAST_CAP CAP_SYSLOG +/* Allow triggering something that will wake the system */ + +#define CAP_WAKE_ALARM 35 + + +#define CAP_LAST_CAP CAP_WAKE_ALARM #define cap_valid(x) ((x) >= 0 && (x) <= CAP_LAST_CAP) @@ -546,18 +551,7 @@ extern bool has_capability_noaudit(struct task_struct *t, int cap); extern bool capable(int cap); extern bool ns_capable(struct user_namespace *ns, int cap); extern bool task_ns_capable(struct task_struct *t, int cap); - -/** - * nsown_capable - Check superior capability to one's own user_ns - * @cap: The capability in question - * - * Return true if the current task has the given superior capability - * targeted at its own user namespace. - */ -static inline bool nsown_capable(int cap) -{ - return ns_capable(current_user_ns(), cap); -} +extern bool nsown_capable(int cap); /* audit system wants to get cap info from files as well */ extern int get_vfs_caps_from_disk(const struct dentry *dentry, struct cpu_vfs_cap_data *cpu_caps); diff --git a/include/linux/cdk.h b/include/linux/cdk.h index 0908daf7bf56..80093a8d4f64 100644 --- a/include/linux/cdk.h +++ b/include/linux/cdk.h @@ -149,7 +149,7 @@ typedef struct cdkhdr { /* * Define the memory mapping structure. This structure is pointed to by * the memp field in the stlcdkhdr struct. As many as these structures - * as required are layed out in shared memory to define how the rest of + * as required are laid out in shared memory to define how the rest of * shared memory is divided up. There will be one for each port. */ typedef struct cdkmem { diff --git a/include/linux/ceph/auth.h b/include/linux/ceph/auth.h index 7fff521d7eb5..aa13392a7efb 100644 --- a/include/linux/ceph/auth.h +++ b/include/linux/ceph/auth.h @@ -67,12 +67,12 @@ struct ceph_auth_client { bool negotiating; /* true if negotiating protocol */ const char *name; /* entity name */ u64 global_id; /* our unique id in system */ - const char *secret; /* our secret key */ + const struct ceph_crypto_key *key; /* our secret key */ unsigned want_keys; /* which services we want */ }; extern struct ceph_auth_client *ceph_auth_init(const char *name, - const char *secret); + const struct ceph_crypto_key *key); extern void ceph_auth_destroy(struct ceph_auth_client *ac); extern void ceph_auth_reset(struct ceph_auth_client *ac); diff --git a/include/linux/ceph/libceph.h b/include/linux/ceph/libceph.h index 0d2e0fffb470..6365f041745b 100644 --- a/include/linux/ceph/libceph.h +++ b/include/linux/ceph/libceph.h @@ -61,7 +61,7 @@ struct ceph_options { pointer type of args */ int num_mon; char *name; - char *secret; + struct ceph_crypto_key *key; }; /* diff --git a/include/linux/cfag12864b.h b/include/linux/cfag12864b.h index 6f9f19d66591..b454dfce60d9 100644 --- a/include/linux/cfag12864b.h +++ b/include/linux/cfag12864b.h @@ -44,7 +44,7 @@ extern unsigned char * cfag12864b_buffer; /* * Get the refresh rate of the LCD * - * Returns the refresh rate (hertzs). + * Returns the refresh rate (hertz). */ extern unsigned int cfag12864b_getrate(void); diff --git a/include/linux/cgroup.h b/include/linux/cgroup.h index e654fa239916..5ac7ebc36dbb 100644 --- a/include/linux/cgroup.h +++ b/include/linux/cgroup.h @@ -240,7 +240,7 @@ struct cgroup { /* For RCU-protected deletion */ struct rcu_head rcu_head; - /* List of events which userspace want to recieve */ + /* List of events which userspace want to receive */ struct list_head event_list; spinlock_t event_list_lock; }; diff --git a/include/linux/clockchips.h b/include/linux/clockchips.h index fc53492b6ad7..d6733e27af34 100644 --- a/include/linux/clockchips.h +++ b/include/linux/clockchips.h @@ -56,46 +56,52 @@ enum clock_event_nofitiers { /** * struct clock_event_device - clock event device descriptor - * @name: ptr to clock event name - * @features: features + * @event_handler: Assigned by the framework to be called by the low + * level handler of the event source + * @set_next_event: set next event function + * @next_event: local storage for the next event in oneshot mode * @max_delta_ns: maximum delta value in ns * @min_delta_ns: minimum delta value in ns * @mult: nanosecond to cycles multiplier * @shift: nanoseconds to cycles divisor (power of two) + * @mode: operating mode assigned by the management code + * @features: features + * @retries: number of forced programming retries + * @set_mode: set mode function + * @broadcast: function to broadcast events + * @min_delta_ticks: minimum delta value in ticks stored for reconfiguration + * @max_delta_ticks: maximum delta value in ticks stored for reconfiguration + * @name: ptr to clock event name * @rating: variable to rate clock event devices * @irq: IRQ number (only for non CPU local devices) * @cpumask: cpumask to indicate for which CPUs this device works - * @set_next_event: set next event function - * @set_mode: set mode function - * @event_handler: Assigned by the framework to be called by the low - * level handler of the event source - * @broadcast: function to broadcast events * @list: list head for the management code - * @mode: operating mode assigned by the management code - * @next_event: local storage for the next event in oneshot mode - * @retries: number of forced programming retries */ struct clock_event_device { - const char *name; - unsigned int features; + void (*event_handler)(struct clock_event_device *); + int (*set_next_event)(unsigned long evt, + struct clock_event_device *); + ktime_t next_event; u64 max_delta_ns; u64 min_delta_ns; u32 mult; u32 shift; + enum clock_event_mode mode; + unsigned int features; + unsigned long retries; + + void (*broadcast)(const struct cpumask *mask); + void (*set_mode)(enum clock_event_mode mode, + struct clock_event_device *); + unsigned long min_delta_ticks; + unsigned long max_delta_ticks; + + const char *name; int rating; int irq; const struct cpumask *cpumask; - int (*set_next_event)(unsigned long evt, - struct clock_event_device *); - void (*set_mode)(enum clock_event_mode mode, - struct clock_event_device *); - void (*event_handler)(struct clock_event_device *); - void (*broadcast)(const struct cpumask *mask); struct list_head list; - enum clock_event_mode mode; - ktime_t next_event; - unsigned long retries; -}; +} ____cacheline_aligned; /* * Calculate a multiplication factor for scaled math, which is used to convert @@ -122,6 +128,12 @@ extern u64 clockevent_delta2ns(unsigned long latch, struct clock_event_device *evt); extern void clockevents_register_device(struct clock_event_device *dev); +extern void clockevents_config_and_register(struct clock_event_device *dev, + u32 freq, unsigned long min_delta, + unsigned long max_delta); + +extern int clockevents_update_freq(struct clock_event_device *ce, u32 freq); + extern void clockevents_exchange_device(struct clock_event_device *old, struct clock_event_device *new); extern void clockevents_set_mode(struct clock_event_device *dev, diff --git a/include/linux/clocksource.h b/include/linux/clocksource.h index c37b21ad5a3b..c918fbd33ee5 100644 --- a/include/linux/clocksource.h +++ b/include/linux/clocksource.h @@ -159,42 +159,38 @@ extern u64 timecounter_cyc2time(struct timecounter *tc, */ struct clocksource { /* - * First part of structure is read mostly + * Hotpath data, fits in a single cache line when the + * clocksource itself is cacheline aligned. */ - char *name; - struct list_head list; - int rating; cycle_t (*read)(struct clocksource *cs); - int (*enable)(struct clocksource *cs); - void (*disable)(struct clocksource *cs); + cycle_t cycle_last; cycle_t mask; u32 mult; u32 shift; u64 max_idle_ns; - unsigned long flags; - cycle_t (*vread)(void); - void (*suspend)(struct clocksource *cs); - void (*resume)(struct clocksource *cs); + #ifdef CONFIG_IA64 void *fsys_mmio; /* used by fsyscall asm code */ #define CLKSRC_FSYS_MMIO_SET(mmio, addr) ((mmio) = (addr)) #else #define CLKSRC_FSYS_MMIO_SET(mmio, addr) do { } while (0) #endif - - /* - * Second part is written at each timer interrupt - * Keep it in a different cache line to dirty no - * more than one cache line. - */ - cycle_t cycle_last ____cacheline_aligned_in_smp; + const char *name; + struct list_head list; + int rating; + cycle_t (*vread)(void); + int (*enable)(struct clocksource *cs); + void (*disable)(struct clocksource *cs); + unsigned long flags; + void (*suspend)(struct clocksource *cs); + void (*resume)(struct clocksource *cs); #ifdef CONFIG_CLOCKSOURCE_WATCHDOG /* Watchdog related data, used by the framework */ struct list_head wd_list; cycle_t wd_last; #endif -}; +} ____cacheline_aligned; /* * Clock source flags bits:: @@ -341,4 +337,6 @@ static inline void update_vsyscall_tz(void) extern void timekeeping_notify(struct clocksource *clock); +extern int clocksource_i8253_init(void); + #endif /* _LINUX_CLOCKSOURCE_H */ diff --git a/include/linux/cm4000_cs.h b/include/linux/cm4000_cs.h index 72bfefdbd767..3c4aac406175 100644 --- a/include/linux/cm4000_cs.h +++ b/include/linux/cm4000_cs.h @@ -20,7 +20,7 @@ typedef struct atreq { } atreq_t; -/* what is particularly stupid in the original driver is the arch-dependant +/* what is particularly stupid in the original driver is the arch-dependent * member sizes. This leads to CONFIG_COMPAT breakage, since 32bit userspace * will lay out the structure members differently than the 64bit kernel. * diff --git a/include/linux/configfs.h b/include/linux/configfs.h index ddb7a97c78c2..645778ad899b 100644 --- a/include/linux/configfs.h +++ b/include/linux/configfs.h @@ -218,7 +218,7 @@ static ssize_t _item##_attr_store(struct config_item *item, \ * group children. default_groups may coexist alongsize make_group() or * make_item(), but if the group wishes to have only default_groups * children (disallowing mkdir(2)), it need not provide either function. - * If the group has commit(), it supports pending and commited (active) + * If the group has commit(), it supports pending and committed (active) * items. */ struct configfs_item_operations { diff --git a/include/linux/connector.h b/include/linux/connector.h index bcafc942e5e4..7c60d0942adb 100644 --- a/include/linux/connector.h +++ b/include/linux/connector.h @@ -88,8 +88,6 @@ struct cn_queue_dev { atomic_t refcnt; unsigned char name[CN_CBQ_NAMELEN]; - struct workqueue_struct *cn_queue; - struct list_head queue_list; spinlock_t queue_lock; @@ -101,20 +99,13 @@ struct cn_callback_id { struct cb_id id; }; -struct cn_callback_data { - struct sk_buff *skb; - void (*callback) (struct cn_msg *, struct netlink_skb_parms *); - - void *free; -}; - struct cn_callback_entry { struct list_head callback_entry; - struct work_struct work; + atomic_t refcnt; struct cn_queue_dev *pdev; struct cn_callback_id id; - struct cn_callback_data data; + void (*callback) (struct cn_msg *, struct netlink_skb_parms *); u32 seq, group; }; @@ -138,13 +129,12 @@ int cn_queue_add_callback(struct cn_queue_dev *dev, const char *name, struct cb_id *id, void (*callback)(struct cn_msg *, struct netlink_skb_parms *)); void cn_queue_del_callback(struct cn_queue_dev *dev, struct cb_id *id); +void cn_queue_release_callback(struct cn_callback_entry *); struct cn_queue_dev *cn_queue_alloc_dev(const char *name, struct sock *); void cn_queue_free_dev(struct cn_queue_dev *dev); int cn_cb_equal(struct cb_id *, struct cb_id *); -void cn_queue_wrapper(struct work_struct *work); - #endif /* __KERNEL__ */ #endif /* __CONNECTOR_H */ diff --git a/include/linux/cper.h b/include/linux/cper.h index 372a25839fd1..c23049496531 100644 --- a/include/linux/cper.h +++ b/include/linux/cper.h @@ -310,7 +310,7 @@ struct cper_sec_proc_ia { __u8 cpuid[48]; }; -/* IA32/X64 Processor Error Infomation Structure */ +/* IA32/X64 Processor Error Information Structure */ struct cper_ia_err_info { uuid_le err_type; __u64 validation_bits; diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h index 9343dd3de858..11be48e0d168 100644 --- a/include/linux/cpufreq.h +++ b/include/linux/cpufreq.h @@ -3,7 +3,7 @@ * * Copyright (C) 2001 Russell King * (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de> - * + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. @@ -56,9 +56,9 @@ static inline int cpufreq_unregister_notifier(struct notifier_block *nb, #define CPUFREQ_POLICY_POWERSAVE (1) #define CPUFREQ_POLICY_PERFORMANCE (2) -/* Frequency values here are CPU kHz so that hardware which doesn't run - * with some frequencies can complain without having to guess what per - * cent / per mille means. +/* Frequency values here are CPU kHz so that hardware which doesn't run + * with some frequencies can complain without having to guess what per + * cent / per mille means. * Maximum transition latency is in nanoseconds - if it's unknown, * CPUFREQ_ETERNAL shall be used. */ @@ -72,13 +72,15 @@ extern struct kobject *cpufreq_global_kobject; struct cpufreq_cpuinfo { unsigned int max_freq; unsigned int min_freq; - unsigned int transition_latency; /* in 10^(-9) s = nanoseconds */ + + /* in 10^(-9) s = nanoseconds */ + unsigned int transition_latency; }; struct cpufreq_real_policy { unsigned int min; /* in kHz */ unsigned int max; /* in kHz */ - unsigned int policy; /* see above */ + unsigned int policy; /* see above */ struct cpufreq_governor *governor; /* see below */ }; @@ -94,7 +96,7 @@ struct cpufreq_policy { unsigned int max; /* in kHz */ unsigned int cur; /* in kHz, only needed if cpufreq * governors are used */ - unsigned int policy; /* see above */ + unsigned int policy; /* see above */ struct cpufreq_governor *governor; /* see below */ struct work_struct update; /* if update_policy() needs to be @@ -167,11 +169,11 @@ static inline unsigned long cpufreq_scale(unsigned long old, u_int div, u_int mu struct cpufreq_governor { char name[CPUFREQ_NAME_LEN]; - int (*governor) (struct cpufreq_policy *policy, + int (*governor) (struct cpufreq_policy *policy, unsigned int event); ssize_t (*show_setspeed) (struct cpufreq_policy *policy, char *buf); - int (*store_setspeed) (struct cpufreq_policy *policy, + int (*store_setspeed) (struct cpufreq_policy *policy, unsigned int freq); unsigned int max_transition_latency; /* HW must be able to switch to next freq faster than this value in nano secs or we @@ -180,7 +182,8 @@ struct cpufreq_governor { struct module *owner; }; -/* pass a target to the cpufreq driver +/* + * Pass a target to the cpufreq driver. */ extern int cpufreq_driver_target(struct cpufreq_policy *policy, unsigned int target_freq, @@ -237,9 +240,9 @@ struct cpufreq_driver { /* flags */ -#define CPUFREQ_STICKY 0x01 /* the driver isn't removed even if +#define CPUFREQ_STICKY 0x01 /* the driver isn't removed even if * all ->init() calls failed */ -#define CPUFREQ_CONST_LOOPS 0x02 /* loops_per_jiffy or other kernel +#define CPUFREQ_CONST_LOOPS 0x02 /* loops_per_jiffy or other kernel * "constants" aren't affected by * frequency transitions */ #define CPUFREQ_PM_NO_WARN 0x04 /* don't warn on suspend/resume speed @@ -252,7 +255,7 @@ int cpufreq_unregister_driver(struct cpufreq_driver *driver_data); void cpufreq_notify_transition(struct cpufreq_freqs *freqs, unsigned int state); -static inline void cpufreq_verify_within_limits(struct cpufreq_policy *policy, unsigned int min, unsigned int max) +static inline void cpufreq_verify_within_limits(struct cpufreq_policy *policy, unsigned int min, unsigned int max) { if (policy->min < min) policy->min = min; @@ -386,34 +389,15 @@ int cpufreq_frequency_table_target(struct cpufreq_policy *policy, /* the following 3 funtions are for cpufreq core use only */ struct cpufreq_frequency_table *cpufreq_frequency_get_table(unsigned int cpu); struct cpufreq_policy *cpufreq_cpu_get(unsigned int cpu); -void cpufreq_cpu_put (struct cpufreq_policy *data); +void cpufreq_cpu_put(struct cpufreq_policy *data); /* the following are really really optional */ extern struct freq_attr cpufreq_freq_attr_scaling_available_freqs; -void cpufreq_frequency_table_get_attr(struct cpufreq_frequency_table *table, +void cpufreq_frequency_table_get_attr(struct cpufreq_frequency_table *table, unsigned int cpu); void cpufreq_frequency_table_put_attr(unsigned int cpu); -/********************************************************************* - * UNIFIED DEBUG HELPERS * - *********************************************************************/ - -#define CPUFREQ_DEBUG_CORE 1 -#define CPUFREQ_DEBUG_DRIVER 2 -#define CPUFREQ_DEBUG_GOVERNOR 4 - -#ifdef CONFIG_CPU_FREQ_DEBUG - -extern void cpufreq_debug_printk(unsigned int type, const char *prefix, - const char *fmt, ...); - -#else - -#define cpufreq_debug_printk(msg...) do { } while(0) - -#endif /* CONFIG_CPU_FREQ_DEBUG */ - #endif /* _LINUX_CPUFREQ_H */ diff --git a/include/linux/cred.h b/include/linux/cred.h index 9aeeb0ba2003..be16b61283cc 100644 --- a/include/linux/cred.h +++ b/include/linux/cred.h @@ -146,6 +146,7 @@ struct cred { void *security; /* subjective LSM security */ #endif struct user_struct *user; /* real user ID subscription */ + struct user_namespace *user_ns; /* cached user->user_ns */ struct group_info *group_info; /* supplementary groups for euid/fsgid */ struct rcu_head rcu; /* RCU deletion hook */ }; @@ -354,10 +355,15 @@ static inline void put_cred(const struct cred *_cred) #define current_fsgid() (current_cred_xxx(fsgid)) #define current_cap() (current_cred_xxx(cap_effective)) #define current_user() (current_cred_xxx(user)) -#define _current_user_ns() (current_cred_xxx(user)->user_ns) #define current_security() (current_cred_xxx(security)) -extern struct user_namespace *current_user_ns(void); +#ifdef CONFIG_USER_NS +#define current_user_ns() (current_cred_xxx(user_ns)) +#else +extern struct user_namespace init_user_ns; +#define current_user_ns() (&init_user_ns) +#endif + #define current_uid_gid(_uid, _gid) \ do { \ diff --git a/include/linux/dcache.h b/include/linux/dcache.h index f2afed4fa945..19d90a55541d 100644 --- a/include/linux/dcache.h +++ b/include/linux/dcache.h @@ -197,7 +197,7 @@ struct dentry_operations { * typically using d_splice_alias. */ #define DCACHE_REFERENCED 0x0008 /* Recently used, don't discard. */ -#define DCACHE_UNHASHED 0x0010 +#define DCACHE_RCUACCESS 0x0010 /* Entry has ever been RCU-visible */ #define DCACHE_INOTIFY_PARENT_WATCHED 0x0020 /* Parent inode is watched by inotify */ @@ -384,7 +384,7 @@ extern struct dentry *dget_parent(struct dentry *dentry); static inline int d_unhashed(struct dentry *dentry) { - return (dentry->d_flags & DCACHE_UNHASHED); + return hlist_bl_unhashed(&dentry->d_hash); } static inline int d_unlinked(struct dentry *dentry) diff --git a/include/linux/decompress/mm.h b/include/linux/decompress/mm.h index 4cb72b920c74..7925bf0ee836 100644 --- a/include/linux/decompress/mm.h +++ b/include/linux/decompress/mm.h @@ -16,7 +16,7 @@ /* * Some architectures want to ensure there is no local data in their - * pre-boot environment, so that data can arbitarily relocated (via + * pre-boot environment, so that data can arbitrarily relocated (via * GOT references). This is achieved by defining STATIC_RW_DATA to * be null. */ diff --git a/include/linux/device-mapper.h b/include/linux/device-mapper.h index e2768834f397..32a4423710f5 100644 --- a/include/linux/device-mapper.h +++ b/include/linux/device-mapper.h @@ -197,7 +197,6 @@ struct dm_target { struct dm_target_callbacks { struct list_head list; int (*congested_fn) (struct dm_target_callbacks *, int); - void (*unplug_fn)(struct dm_target_callbacks *); }; int dm_register_target(struct target_type *t); diff --git a/include/linux/device.h b/include/linux/device.h index ab8dfc095709..c66111affca9 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -47,6 +47,38 @@ extern int __must_check bus_create_file(struct bus_type *, struct bus_attribute *); extern void bus_remove_file(struct bus_type *, struct bus_attribute *); +/** + * struct bus_type - The bus type of the device + * + * @name: The name of the bus. + * @bus_attrs: Default attributes of the bus. + * @dev_attrs: Default attributes of the devices on the bus. + * @drv_attrs: Default attributes of the device drivers on the bus. + * @match: Called, perhaps multiple times, whenever a new device or driver + * is added for this bus. It should return a nonzero value if the + * given device can be handled by the given driver. + * @uevent: Called when a device is added, removed, or a few other things + * that generate uevents to add the environment variables. + * @probe: Called when a new device or driver add to this bus, and callback + * the specific driver's probe to initial the matched device. + * @remove: Called when a device removed from this bus. + * @shutdown: Called at shut-down time to quiesce the device. + * @suspend: Called when a device on this bus wants to go to sleep mode. + * @resume: Called to bring a device on this bus out of sleep mode. + * @pm: Power management operations of this bus, callback the specific + * device driver's pm-ops. + * @p: The private data of the driver core, only the driver core can + * touch this. + * + * A bus is a channel between the processor and one or more devices. For the + * purposes of the device model, all devices are connected via a bus, even if + * it is an internal, virtual, "platform" bus. Buses can plug into each other. + * A USB controller is usually a PCI device, for example. The device model + * represents the actual connections between buses and the devices they control. + * A bus is represented by the bus_type structure. It contains the name, the + * default attributes, the bus' methods, PM operations, and the driver core's + * private data. + */ struct bus_type { const char *name; struct bus_attribute *bus_attrs; @@ -119,6 +151,37 @@ extern int bus_unregister_notifier(struct bus_type *bus, extern struct kset *bus_get_kset(struct bus_type *bus); extern struct klist *bus_get_device_klist(struct bus_type *bus); +/** + * struct device_driver - The basic device driver structure + * @name: Name of the device driver. + * @bus: The bus which the device of this driver belongs to. + * @owner: The module owner. + * @mod_name: Used for built-in modules. + * @suppress_bind_attrs: Disables bind/unbind via sysfs. + * @of_match_table: The open firmware table. + * @probe: Called to query the existence of a specific device, + * whether this driver can work with it, and bind the driver + * to a specific device. + * @remove: Called when the device is removed from the system to + * unbind a device from this driver. + * @shutdown: Called at shut-down time to quiesce the device. + * @suspend: Called to put the device to sleep mode. Usually to a + * low power state. + * @resume: Called to bring a device from sleep mode. + * @groups: Default attributes that get created by the driver core + * automatically. + * @pm: Power management operations of the device which matched + * this driver. + * @p: Driver core's private data, no one other than the driver + * core can touch this. + * + * The device driver-model tracks all of the drivers known to the system. + * The main reason for this tracking is to enable the driver core to match + * up drivers with new devices. Once drivers are known objects within the + * system, however, a number of other things become possible. Device drivers + * can export information and configuration variables that are independent + * of any specific device. + */ struct device_driver { const char *name; struct bus_type *bus; @@ -185,8 +248,34 @@ struct device *driver_find_device(struct device_driver *drv, struct device *start, void *data, int (*match)(struct device *dev, void *data)); -/* - * device classes +/** + * struct class - device classes + * @name: Name of the class. + * @owner: The module owner. + * @class_attrs: Default attributes of this class. + * @dev_attrs: Default attributes of the devices belong to the class. + * @dev_bin_attrs: Default binary attributes of the devices belong to the class. + * @dev_kobj: The kobject that represents this class and links it into the hierarchy. + * @dev_uevent: Called when a device is added, removed from this class, or a + * few other things that generate uevents to add the environment + * variables. + * @devnode: Callback to provide the devtmpfs. + * @class_release: Called to release this class. + * @dev_release: Called to release the device. + * @suspend: Used to put the device to sleep mode, usually to a low power + * state. + * @resume: Used to bring the device from the sleep mode. + * @ns_type: Callbacks so sysfs can detemine namespaces. + * @namespace: Namespace of the device belongs to this class. + * @pm: The default device power management operations of this class. + * @p: The private data of the driver core, no one other than the + * driver core can touch this. + * + * A class is a higher-level view of a device that abstracts out low-level + * implementation details. Drivers may see a SCSI disk or an ATA disk, but, + * at the class level, they are all simply disks. Classes allow user space + * to work with devices based on what they do, rather than how they are + * connected or how they work. */ struct class { const char *name; @@ -401,6 +490,65 @@ struct device_dma_parameters { unsigned long segment_boundary_mask; }; +/** + * struct device - The basic device structure + * @parent: The device's "parent" device, the device to which it is attached. + * In most cases, a parent device is some sort of bus or host + * controller. If parent is NULL, the device, is a top-level device, + * which is not usually what you want. + * @p: Holds the private data of the driver core portions of the device. + * See the comment of the struct device_private for detail. + * @kobj: A top-level, abstract class from which other classes are derived. + * @init_name: Initial name of the device. + * @type: The type of device. + * This identifies the device type and carries type-specific + * information. + * @mutex: Mutex to synchronize calls to its driver. + * @bus: Type of bus device is on. + * @driver: Which driver has allocated this + * @platform_data: Platform data specific to the device. + * Example: For devices on custom boards, as typical of embedded + * and SOC based hardware, Linux often uses platform_data to point + * to board-specific structures describing devices and how they + * are wired. That can include what ports are available, chip + * variants, which GPIO pins act in what additional roles, and so + * on. This shrinks the "Board Support Packages" (BSPs) and + * minimizes board-specific #ifdefs in drivers. + * @power: For device power management. + * See Documentation/power/devices.txt for details. + * @pwr_domain: Provide callbacks that are executed during system suspend, + * hibernation, system resume and during runtime PM transitions + * along with subsystem-level and driver-level callbacks. + * @numa_node: NUMA node this device is close to. + * @dma_mask: Dma mask (if dma'ble device). + * @coherent_dma_mask: Like dma_mask, but for alloc_coherent mapping as not all + * hardware supports 64-bit addresses for consistent allocations + * such descriptors. + * @dma_parms: A low level driver may set these to teach IOMMU code about + * segment limitations. + * @dma_pools: Dma pools (if dma'ble device). + * @dma_mem: Internal for coherent mem override. + * @archdata: For arch-specific additions. + * @of_node: Associated device tree node. + * @of_match: Matching of_device_id from driver. + * @devt: For creating the sysfs "dev". + * @devres_lock: Spinlock to protect the resource of the device. + * @devres_head: The resources list of the device. + * @knode_class: The node used to add the device to the class list. + * @class: The class of the device. + * @groups: Optional attribute groups. + * @release: Callback to free the device after all references have + * gone away. This should be set by the allocator of the + * device (i.e. the bus driver that discovered the device). + * + * At the lowest level, every device in a Linux system is represented by an + * instance of struct device. The device structure contains the information + * that the device model core needs to model the system. Most subsystems, + * however, track additional information about the devices they host. As a + * result, it is rare for devices to be represented by bare device structures; + * instead, that structure, like kobject structures, is usually embedded within + * a higher-level representation of the device. + */ struct device { struct device *parent; @@ -408,7 +556,7 @@ struct device { struct kobject kobj; const char *init_name; /* initial name of the device */ - struct device_type *type; + const struct device_type *type; struct mutex mutex; /* mutex to synchronize calls to * its driver. @@ -442,7 +590,6 @@ struct device { struct dev_archdata archdata; struct device_node *of_node; /* associated device tree node */ - const struct of_device_id *of_match; /* matching of_device_id from driver */ dev_t devt; /* dev_t, creates the sysfs "dev" */ @@ -557,7 +704,7 @@ extern int device_move(struct device *dev, struct device *new_parent, extern const char *device_get_devnode(struct device *dev, mode_t *mode, const char **tmp); extern void *dev_get_drvdata(const struct device *dev); -extern void dev_set_drvdata(struct device *dev, void *data); +extern int dev_set_drvdata(struct device *dev, void *data); /* * Root device objects for grouping under /sys/devices @@ -611,7 +758,7 @@ extern int (*platform_notify)(struct device *dev); extern int (*platform_notify_remove)(struct device *dev); -/** +/* * get_device - atomically increment the reference count for the device. * */ @@ -633,13 +780,6 @@ static inline int devtmpfs_mount(const char *mountpoint) { return 0; } /* drivers/base/power/shutdown.c */ extern void device_shutdown(void); -#ifndef CONFIG_ARCH_NO_SYSDEV_OPS -/* drivers/base/sys.c */ -extern void sysdev_shutdown(void); -#else -static inline void sysdev_shutdown(void) { } -#endif - /* debugging and troubleshooting/diagnostic helpers. */ extern const char *dev_driver_string(const struct device *dev); @@ -742,13 +882,17 @@ do { \ #endif /* - * dev_WARN() acts like dev_printk(), but with the key difference + * dev_WARN*() acts like dev_printk(), but with the key difference * of using a WARN/WARN_ON to get the message out, including the * file/line information and a backtrace. */ #define dev_WARN(dev, format, arg...) \ WARN(1, "Device: %s\n" format, dev_driver_string(dev), ## arg); +#define dev_WARN_ONCE(dev, condition, format, arg...) \ + WARN_ONCE(condition, "Device %s\n" format, \ + dev_driver_string(dev), ## arg) + /* Create alias, so I can be autoloaded. */ #define MODULE_ALIAS_CHARDEV(major,minor) \ MODULE_ALIAS("char-major-" __stringify(major) "-" __stringify(minor)) diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h index 9bebd7f16ef1..eee7addec282 100644 --- a/include/linux/dmaengine.h +++ b/include/linux/dmaengine.h @@ -434,7 +434,7 @@ struct dma_tx_state { * zero or error code * @device_tx_status: poll for transaction completion, the optional * txstate parameter can be supplied with a pointer to get a - * struct with auxilary transfer status information, otherwise the call + * struct with auxiliary transfer status information, otherwise the call * will just return a simple status code * @device_issue_pending: push pending transactions to hardware */ diff --git a/include/linux/drbd.h b/include/linux/drbd.h index ef44c7a0638c..cec467f5d676 100644 --- a/include/linux/drbd.h +++ b/include/linux/drbd.h @@ -36,7 +36,7 @@ #include <sys/wait.h> #include <limits.h> -/* Altough the Linux source code makes a difference between +/* Although the Linux source code makes a difference between generic endianness and the bitfields' endianness, there is no architecture as of Linux-2.6.24-rc4 where the bitfileds' endianness does not match the generic endianness. */ @@ -53,10 +53,10 @@ extern const char *drbd_buildtag(void); -#define REL_VERSION "8.3.9" +#define REL_VERSION "8.3.10" #define API_VERSION 88 #define PRO_VERSION_MIN 86 -#define PRO_VERSION_MAX 95 +#define PRO_VERSION_MAX 96 enum drbd_io_error_p { @@ -96,8 +96,14 @@ enum drbd_on_no_data { OND_SUSPEND_IO }; +enum drbd_on_congestion { + OC_BLOCK, + OC_PULL_AHEAD, + OC_DISCONNECT, +}; + /* KEEP the order, do not delete or insert. Only append. */ -enum drbd_ret_codes { +enum drbd_ret_code { ERR_CODE_BASE = 100, NO_ERROR = 101, ERR_LOCAL_ADDR = 102, @@ -146,6 +152,9 @@ enum drbd_ret_codes { ERR_PERM = 152, ERR_NEED_APV_93 = 153, ERR_STONITH_AND_PROT_A = 154, + ERR_CONG_NOT_PROTO_A = 155, + ERR_PIC_AFTER_DEP = 156, + ERR_PIC_PEER_DEP = 157, /* insert new ones above this line */ AFTER_LAST_ERR_CODE @@ -175,7 +184,7 @@ enum drbd_conns { /* These temporal states are all used on the way * from >= C_CONNECTED to Unconnected. * The 'disconnect reason' states - * I do not allow to change beween them. */ + * I do not allow to change between them. */ C_TIMEOUT, C_BROKEN_PIPE, C_NETWORK_FAILURE, @@ -199,6 +208,10 @@ enum drbd_conns { C_VERIFY_T, C_PAUSED_SYNC_S, C_PAUSED_SYNC_T, + + C_AHEAD, + C_BEHIND, + C_MASK = 31 }; @@ -259,7 +272,7 @@ union drbd_state { unsigned int i; }; -enum drbd_state_ret_codes { +enum drbd_state_rv { SS_CW_NO_NEED = 4, SS_CW_SUCCESS = 3, SS_NOTHING_TO_DO = 2, @@ -290,7 +303,7 @@ enum drbd_state_ret_codes { extern const char *drbd_conn_str(enum drbd_conns); extern const char *drbd_role_str(enum drbd_role); extern const char *drbd_disk_str(enum drbd_disk_state); -extern const char *drbd_set_st_err_str(enum drbd_state_ret_codes); +extern const char *drbd_set_st_err_str(enum drbd_state_rv); #define SHARED_SECRET_MAX 64 diff --git a/include/linux/drbd_limits.h b/include/linux/drbd_limits.h index 4ac33f34b77e..246f576c981d 100644 --- a/include/linux/drbd_limits.h +++ b/include/linux/drbd_limits.h @@ -16,7 +16,8 @@ #define DEBUG_RANGE_CHECK 0 #define DRBD_MINOR_COUNT_MIN 1 -#define DRBD_MINOR_COUNT_MAX 255 +#define DRBD_MINOR_COUNT_MAX 256 +#define DRBD_MINOR_COUNT_DEF 32 #define DRBD_DIALOG_REFRESH_MIN 0 #define DRBD_DIALOG_REFRESH_MAX 600 @@ -42,7 +43,7 @@ /* net { */ /* timeout, unit centi seconds - * more than one minute timeout is not usefull */ + * more than one minute timeout is not useful */ #define DRBD_TIMEOUT_MIN 1 #define DRBD_TIMEOUT_MAX 600 #define DRBD_TIMEOUT_DEF 60 /* 6 seconds */ @@ -67,7 +68,7 @@ #define DRBD_MAX_EPOCH_SIZE_MAX 20000 #define DRBD_MAX_EPOCH_SIZE_DEF 2048 - /* I don't think that a tcp send buffer of more than 10M is usefull */ + /* I don't think that a tcp send buffer of more than 10M is useful */ #define DRBD_SNDBUF_SIZE_MIN 0 #define DRBD_SNDBUF_SIZE_MAX (10<<20) #define DRBD_SNDBUF_SIZE_DEF 0 @@ -100,7 +101,7 @@ #define DRBD_RATE_MAX (4 << 20) #define DRBD_RATE_DEF 250 /* kb/second */ - /* less than 7 would hit performance unneccessarily. + /* less than 7 would hit performance unnecessarily. * 3833 is the largest prime that still does fit * into 64 sectors of activity log */ #define DRBD_AL_EXTENTS_MIN 7 @@ -129,6 +130,7 @@ #define DRBD_AFTER_SB_2P_DEF ASB_DISCONNECT #define DRBD_RR_CONFLICT_DEF ASB_DISCONNECT #define DRBD_ON_NO_DATA_DEF OND_IO_ERROR +#define DRBD_ON_CONGESTION_DEF OC_BLOCK #define DRBD_MAX_BIO_BVECS_MIN 0 #define DRBD_MAX_BIO_BVECS_MAX 128 @@ -154,5 +156,13 @@ #define DRBD_C_MIN_RATE_MAX (4 << 20) #define DRBD_C_MIN_RATE_DEF 4096 +#define DRBD_CONG_FILL_MIN 0 +#define DRBD_CONG_FILL_MAX (10<<21) /* 10GByte in sectors */ +#define DRBD_CONG_FILL_DEF 0 + +#define DRBD_CONG_EXTENTS_MIN DRBD_AL_EXTENTS_MIN +#define DRBD_CONG_EXTENTS_MAX DRBD_AL_EXTENTS_MAX +#define DRBD_CONG_EXTENTS_DEF DRBD_AL_EXTENTS_DEF + #undef RANGE #endif diff --git a/include/linux/drbd_nl.h b/include/linux/drbd_nl.h index ade91107c9a5..ab6159e4fcf0 100644 --- a/include/linux/drbd_nl.h +++ b/include/linux/drbd_nl.h @@ -56,6 +56,9 @@ NL_PACKET(net_conf, 5, NL_INTEGER( 39, T_MAY_IGNORE, rr_conflict) NL_INTEGER( 40, T_MAY_IGNORE, ping_timeo) NL_INTEGER( 67, T_MAY_IGNORE, rcvbuf_size) + NL_INTEGER( 81, T_MAY_IGNORE, on_congestion) + NL_INTEGER( 82, T_MAY_IGNORE, cong_fill) + NL_INTEGER( 83, T_MAY_IGNORE, cong_extents) /* 59 addr_family was available in GIT, never released */ NL_BIT( 60, T_MANDATORY, mind_af) NL_BIT( 27, T_MAY_IGNORE, want_lose) @@ -66,7 +69,9 @@ NL_PACKET(net_conf, 5, NL_BIT( 70, T_MANDATORY, dry_run) ) -NL_PACKET(disconnect, 6, ) +NL_PACKET(disconnect, 6, + NL_BIT( 84, T_MAY_IGNORE, force) +) NL_PACKET(resize, 7, NL_INT64( 29, T_MAY_IGNORE, resize_size) @@ -143,9 +148,13 @@ NL_PACKET(new_c_uuid, 26, NL_BIT( 63, T_MANDATORY, clear_bm) ) +#ifdef NL_RESPONSE +NL_RESPONSE(return_code_only, 27) +#endif + #undef NL_PACKET #undef NL_INTEGER #undef NL_INT64 #undef NL_BIT #undef NL_STRING - +#undef NL_RESPONSE diff --git a/include/linux/drbd_tag_magic.h b/include/linux/drbd_tag_magic.h index fcdff8410e99..f14a165e82dc 100644 --- a/include/linux/drbd_tag_magic.h +++ b/include/linux/drbd_tag_magic.h @@ -7,6 +7,7 @@ /* declare packet_type enums */ enum packet_types { #define NL_PACKET(name, number, fields) P_ ## name = number, +#define NL_RESPONSE(name, number) P_ ## name = number, #define NL_INTEGER(pn, pr, member) #define NL_INT64(pn, pr, member) #define NL_BIT(pn, pr, member) diff --git a/include/linux/dynamic_debug.h b/include/linux/dynamic_debug.h index 0c9653f11c18..e747ecd48e1c 100644 --- a/include/linux/dynamic_debug.h +++ b/include/linux/dynamic_debug.h @@ -1,8 +1,6 @@ #ifndef _DYNAMIC_DEBUG_H #define _DYNAMIC_DEBUG_H -#include <linux/jump_label.h> - /* dynamic_printk_enabled, and dynamic_printk_enabled2 are bitmasks in which * bit n is set to 1 if any modname hashes into the bucket n, 0 otherwise. They * use independent hash functions, to reduce the chance of false positives. diff --git a/include/linux/elevator.h b/include/linux/elevator.h index d93efcc44570..21a8ebf2dc3a 100644 --- a/include/linux/elevator.h +++ b/include/linux/elevator.h @@ -101,7 +101,6 @@ extern void elv_dispatch_sort(struct request_queue *, struct request *); extern void elv_dispatch_add_tail(struct request_queue *, struct request *); extern void elv_add_request(struct request_queue *, struct request *, int); extern void __elv_add_request(struct request_queue *, struct request *, int); -extern void elv_insert(struct request_queue *, struct request *, int); extern int elv_merge(struct request_queue *, struct request **, struct bio *); extern int elv_try_merge(struct request *, struct bio *); extern void elv_merge_requests(struct request_queue *, struct request *, diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h index ae757bcf1280..c6a850ab2ec5 100644 --- a/include/linux/ethtool.h +++ b/include/linux/ethtool.h @@ -24,7 +24,10 @@ struct ethtool_cmd { __u32 cmd; __u32 supported; /* Features this interface supports */ __u32 advertising; /* Features this interface advertises */ - __u16 speed; /* The forced speed, 10Mb, 100Mb, gigabit */ + __u16 speed; /* The forced speed (lower bits) in + * Mbps. Please use + * ethtool_cmd_speed()/_set() to + * access it */ __u8 duplex; /* Duplex, half or full */ __u8 port; /* Which connector port */ __u8 phy_address; @@ -33,7 +36,10 @@ struct ethtool_cmd { __u8 mdio_support; __u32 maxtxpkt; /* Tx pkts before generating tx int */ __u32 maxrxpkt; /* Rx pkts before generating rx int */ - __u16 speed_hi; + __u16 speed_hi; /* The forced speed (upper + * bits) in Mbps. Please use + * ethtool_cmd_speed()/_set() to + * access it */ __u8 eth_tp_mdix; __u8 reserved2; __u32 lp_advertising; /* Features the link partner advertises */ @@ -41,14 +47,14 @@ struct ethtool_cmd { }; static inline void ethtool_cmd_speed_set(struct ethtool_cmd *ep, - __u32 speed) + __u32 speed) { ep->speed = (__u16)speed; ep->speed_hi = (__u16)(speed >> 16); } -static inline __u32 ethtool_cmd_speed(struct ethtool_cmd *ep) +static inline __u32 ethtool_cmd_speed(const struct ethtool_cmd *ep) { return (ep->speed_hi << 16) | ep->speed; } @@ -229,6 +235,34 @@ struct ethtool_ringparam { __u32 tx_pending; }; +/** + * struct ethtool_channels - configuring number of network channel + * @cmd: ETHTOOL_{G,S}CHANNELS + * @max_rx: Read only. Maximum number of receive channel the driver support. + * @max_tx: Read only. Maximum number of transmit channel the driver support. + * @max_other: Read only. Maximum number of other channel the driver support. + * @max_combined: Read only. Maximum number of combined channel the driver + * support. Set of queues RX, TX or other. + * @rx_count: Valid values are in the range 1 to the max_rx. + * @tx_count: Valid values are in the range 1 to the max_tx. + * @other_count: Valid values are in the range 1 to the max_other. + * @combined_count: Valid values are in the range 1 to the max_combined. + * + * This can be used to configure RX, TX and other channels. + */ + +struct ethtool_channels { + __u32 cmd; + __u32 max_rx; + __u32 max_tx; + __u32 max_other; + __u32 max_combined; + __u32 rx_count; + __u32 tx_count; + __u32 other_count; + __u32 combined_count; +}; + /* for configuring link flow control parameters */ struct ethtool_pauseparam { __u32 cmd; /* ETHTOOL_{G,S}PAUSEPARAM */ @@ -380,27 +414,42 @@ struct ethtool_usrip4_spec { __u8 proto; }; +union ethtool_flow_union { + struct ethtool_tcpip4_spec tcp_ip4_spec; + struct ethtool_tcpip4_spec udp_ip4_spec; + struct ethtool_tcpip4_spec sctp_ip4_spec; + struct ethtool_ah_espip4_spec ah_ip4_spec; + struct ethtool_ah_espip4_spec esp_ip4_spec; + struct ethtool_usrip4_spec usr_ip4_spec; + struct ethhdr ether_spec; + __u8 hdata[60]; +}; + +struct ethtool_flow_ext { + __be16 vlan_etype; + __be16 vlan_tci; + __be32 data[2]; +}; + /** * struct ethtool_rx_flow_spec - specification for RX flow filter * @flow_type: Type of match to perform, e.g. %TCP_V4_FLOW * @h_u: Flow fields to match (dependent on @flow_type) - * @m_u: Masks for flow field bits to be ignored + * @h_ext: Additional fields to match + * @m_u: Masks for flow field bits to be matched + * @m_ext: Masks for additional field bits to be matched + * Note, all additional fields must be ignored unless @flow_type + * includes the %FLOW_EXT flag. * @ring_cookie: RX ring/queue index to deliver to, or %RX_CLS_FLOW_DISC * if packets should be discarded * @location: Index of filter in hardware table */ struct ethtool_rx_flow_spec { __u32 flow_type; - union { - struct ethtool_tcpip4_spec tcp_ip4_spec; - struct ethtool_tcpip4_spec udp_ip4_spec; - struct ethtool_tcpip4_spec sctp_ip4_spec; - struct ethtool_ah_espip4_spec ah_ip4_spec; - struct ethtool_ah_espip4_spec esp_ip4_spec; - struct ethtool_usrip4_spec usr_ip4_spec; - struct ethhdr ether_spec; - __u8 hdata[72]; - } h_u, m_u; + union ethtool_flow_union h_u; + struct ethtool_flow_ext h_ext; + union ethtool_flow_union m_u; + struct ethtool_flow_ext m_ext; __u64 ring_cookie; __u32 location; }; @@ -458,16 +507,10 @@ struct ethtool_rxnfc { struct compat_ethtool_rx_flow_spec { u32 flow_type; - union { - struct ethtool_tcpip4_spec tcp_ip4_spec; - struct ethtool_tcpip4_spec udp_ip4_spec; - struct ethtool_tcpip4_spec sctp_ip4_spec; - struct ethtool_ah_espip4_spec ah_ip4_spec; - struct ethtool_ah_espip4_spec esp_ip4_spec; - struct ethtool_usrip4_spec usr_ip4_spec; - struct ethhdr ether_spec; - u8 hdata[72]; - } h_u, m_u; + union ethtool_flow_union h_u; + struct ethtool_flow_ext h_ext; + union ethtool_flow_union m_u; + struct ethtool_flow_ext m_ext; compat_u64 ring_cookie; u32 location; }; @@ -558,6 +601,26 @@ struct ethtool_flash { char data[ETHTOOL_FLASH_MAX_FILENAME]; }; +/** + * struct ethtool_dump - used for retrieving, setting device dump + * @cmd: Command number - %ETHTOOL_GET_DUMP_FLAG, %ETHTOOL_GET_DUMP_DATA, or + * %ETHTOOL_SET_DUMP + * @version: FW version of the dump, filled in by driver + * @flag: driver dependent flag for dump setting, filled in by driver during + * get and filled in by ethtool for set operation + * @len: length of dump data, used as the length of the user buffer on entry to + * %ETHTOOL_GET_DUMP_DATA and this is returned as dump length by driver + * for %ETHTOOL_GET_DUMP_FLAG command + * @data: data collected for get dump data operation + */ +struct ethtool_dump { + __u32 cmd; + __u32 version; + __u32 flag; + __u32 len; + __u8 data[0]; +}; + /* for returning and changing feature sets */ /** @@ -614,7 +677,7 @@ struct ethtool_sfeatures { * values of corresponding bits in features[].requested. Bits in .requested * not set in .valid or not changeable are ignored. * - * Returns %EINVAL when .valid contains undefined or never-changable bits + * Returns %EINVAL when .valid contains undefined or never-changeable bits * or size is not equal to required number of features words (32-bit blocks). * Returns >= 0 if request was completed; bits set in the value mean: * %ETHTOOL_F_UNSUPPORTED - there were bits set in .valid that are not @@ -663,6 +726,22 @@ struct ethtool_rx_ntuple_list { unsigned int count; }; +/** + * enum ethtool_phys_id_state - indicator state for physical identification + * @ETHTOOL_ID_INACTIVE: Physical ID indicator should be deactivated + * @ETHTOOL_ID_ACTIVE: Physical ID indicator should be activated + * @ETHTOOL_ID_ON: LED should be turned on (used iff %ETHTOOL_ID_ACTIVE + * is not supported) + * @ETHTOOL_ID_OFF: LED should be turned off (used iff %ETHTOOL_ID_ACTIVE + * is not supported) + */ +enum ethtool_phys_id_state { + ETHTOOL_ID_INACTIVE, + ETHTOOL_ID_ACTIVE, + ETHTOOL_ID_ON, + ETHTOOL_ID_OFF +}; + struct net_device; /* Some generic methods drivers may use in their ethtool_ops */ @@ -680,65 +759,134 @@ int ethtool_op_set_ufo(struct net_device *dev, u32 data); u32 ethtool_op_get_flags(struct net_device *dev); int ethtool_op_set_flags(struct net_device *dev, u32 data, u32 supported); void ethtool_ntuple_flush(struct net_device *dev); +bool ethtool_invalid_flags(struct net_device *dev, u32 data, u32 supported); /** - * ðtool_ops - Alter and report network device settings - * get_settings: Get device-specific settings - * set_settings: Set device-specific settings - * get_drvinfo: Report driver information - * get_regs: Get device registers - * get_wol: Report whether Wake-on-Lan is enabled - * set_wol: Turn Wake-on-Lan on or off - * get_msglevel: Report driver message level - * set_msglevel: Set driver message level - * nway_reset: Restart autonegotiation - * get_link: Get link status - * get_eeprom: Read data from the device EEPROM - * set_eeprom: Write data to the device EEPROM - * get_coalesce: Get interrupt coalescing parameters - * set_coalesce: Set interrupt coalescing parameters - * get_ringparam: Report ring sizes - * set_ringparam: Set ring sizes - * get_pauseparam: Report pause parameters - * set_pauseparam: Set pause parameters - * get_rx_csum: Report whether receive checksums are turned on or off - * set_rx_csum: Turn receive checksum on or off - * get_tx_csum: Report whether transmit checksums are turned on or off - * set_tx_csum: Turn transmit checksums on or off - * get_sg: Report whether scatter-gather is enabled - * set_sg: Turn scatter-gather on or off - * get_tso: Report whether TCP segmentation offload is enabled - * set_tso: Turn TCP segmentation offload on or off - * get_ufo: Report whether UDP fragmentation offload is enabled - * set_ufo: Turn UDP fragmentation offload on or off - * self_test: Run specified self-tests - * get_strings: Return a set of strings that describe the requested objects - * phys_id: Identify the device - * get_stats: Return statistics about the device - * get_flags: get 32-bit flags bitmap - * set_flags: set 32-bit flags bitmap - * - * Description: - * - * get_settings: - * @get_settings is passed an ðtool_cmd to fill in. It returns - * an negative errno or zero. - * - * set_settings: - * @set_settings is passed an ðtool_cmd and should attempt to set - * all the settings this device supports. It may return an error value - * if something goes wrong (otherwise 0). - * - * get_eeprom: + * struct ethtool_ops - optional netdev operations + * @get_settings: Get various device settings including Ethernet link + * settings. The @cmd parameter is expected to have been cleared + * before get_settings is called. Returns a negative error code or + * zero. + * @set_settings: Set various device settings including Ethernet link + * settings. Returns a negative error code or zero. + * @get_drvinfo: Report driver/device information. Should only set the + * @driver, @version, @fw_version and @bus_info fields. If not + * implemented, the @driver and @bus_info fields will be filled in + * according to the netdev's parent device. + * @get_regs_len: Get buffer length required for @get_regs + * @get_regs: Get device registers + * @get_wol: Report whether Wake-on-Lan is enabled + * @set_wol: Turn Wake-on-Lan on or off. Returns a negative error code + * or zero. + * @get_msglevel: Report driver message level. This should be the value + * of the @msg_enable field used by netif logging functions. + * @set_msglevel: Set driver message level + * @nway_reset: Restart autonegotiation. Returns a negative error code + * or zero. + * @get_link: Report whether physical link is up. Will only be called if + * the netdev is up. Should usually be set to ethtool_op_get_link(), + * which uses netif_carrier_ok(). + * @get_eeprom: Read data from the device EEPROM. * Should fill in the magic field. Don't need to check len for zero * or wraparound. Fill in the data argument with the eeprom values * from offset to offset + len. Update len to the amount read. * Returns an error or zero. - * - * set_eeprom: + * @set_eeprom: Write data to the device EEPROM. * Should validate the magic field. Don't need to check len for zero * or wraparound. Update len to the amount written. Returns an error * or zero. + * @get_coalesce: Get interrupt coalescing parameters. Returns a negative + * error code or zero. + * @set_coalesce: Set interrupt coalescing parameters. Returns a negative + * error code or zero. + * @get_ringparam: Report ring sizes + * @set_ringparam: Set ring sizes. Returns a negative error code or zero. + * @get_pauseparam: Report pause parameters + * @set_pauseparam: Set pause parameters. Returns a negative error code + * or zero. + * @get_rx_csum: Deprecated in favour of the netdev feature %NETIF_F_RXCSUM. + * Report whether receive checksums are turned on or off. + * @set_rx_csum: Deprecated in favour of generic netdev features. Turn + * receive checksum on or off. Returns a negative error code or zero. + * @get_tx_csum: Deprecated as redundant. Report whether transmit checksums + * are turned on or off. + * @set_tx_csum: Deprecated in favour of generic netdev features. Turn + * transmit checksums on or off. Returns a egative error code or zero. + * @get_sg: Deprecated as redundant. Report whether scatter-gather is + * enabled. + * @set_sg: Deprecated in favour of generic netdev features. Turn + * scatter-gather on or off. Returns a negative error code or zero. + * @get_tso: Deprecated as redundant. Report whether TCP segmentation + * offload is enabled. + * @set_tso: Deprecated in favour of generic netdev features. Turn TCP + * segmentation offload on or off. Returns a negative error code or zero. + * @self_test: Run specified self-tests + * @get_strings: Return a set of strings that describe the requested objects + * @set_phys_id: Identify the physical devices, e.g. by flashing an LED + * attached to it. The implementation may update the indicator + * asynchronously or synchronously, but in either case it must return + * quickly. It is initially called with the argument %ETHTOOL_ID_ACTIVE, + * and must either activate asynchronous updates and return zero, return + * a negative error or return a positive frequency for synchronous + * indication (e.g. 1 for one on/off cycle per second). If it returns + * a frequency then it will be called again at intervals with the + * argument %ETHTOOL_ID_ON or %ETHTOOL_ID_OFF and should set the state of + * the indicator accordingly. Finally, it is called with the argument + * %ETHTOOL_ID_INACTIVE and must deactivate the indicator. Returns a + * negative error code or zero. + * @get_ethtool_stats: Return extended statistics about the device. + * This is only useful if the device maintains statistics not + * included in &struct rtnl_link_stats64. + * @begin: Function to be called before any other operation. Returns a + * negative error code or zero. + * @complete: Function to be called after any other operation except + * @begin. Will be called even if the other operation failed. + * @get_ufo: Deprecated as redundant. Report whether UDP fragmentation + * offload is enabled. + * @set_ufo: Deprecated in favour of generic netdev features. Turn UDP + * fragmentation offload on or off. Returns a negative error code or zero. + * @get_flags: Deprecated as redundant. Report features included in + * &enum ethtool_flags that are enabled. + * @set_flags: Deprecated in favour of generic netdev features. Turn + * features included in &enum ethtool_flags on or off. Returns a + * negative error code or zero. + * @get_priv_flags: Report driver-specific feature flags. + * @set_priv_flags: Set driver-specific feature flags. Returns a negative + * error code or zero. + * @get_sset_count: Get number of strings that @get_strings will write. + * @get_rxnfc: Get RX flow classification rules. Returns a negative + * error code or zero. + * @set_rxnfc: Set RX flow classification rules. Returns a negative + * error code or zero. + * @flash_device: Write a firmware image to device's flash memory. + * Returns a negative error code or zero. + * @reset: Reset (part of) the device, as specified by a bitmask of + * flags from &enum ethtool_reset_flags. Returns a negative + * error code or zero. + * @set_rx_ntuple: Set an RX n-tuple rule. Returns a negative error code + * or zero. + * @get_rx_ntuple: Deprecated. + * @get_rxfh_indir: Get the contents of the RX flow hash indirection table. + * Returns a negative error code or zero. + * @set_rxfh_indir: Set the contents of the RX flow hash indirection table. + * Returns a negative error code or zero. + * @get_channels: Get number of channels. + * @set_channels: Set number of channels. Returns a negative error code or + * zero. + * @get_dump_flag: Get dump flag indicating current dump length, version, + * and flag of the device. + * @get_dump_data: Get dump data. + * @set_dump: Set dump specific flags to the device. + * + * All operations are optional (i.e. the function pointer may be set + * to %NULL) and callers must take this into account. Callers must + * hold the RTNL, except that for @get_drvinfo the caller may or may + * not hold the RTNL. + * + * See the structures used by these operations for further documentation. + * + * See &struct net_device and &struct net_device_ops for documentation + * of the generic netdev features interface. */ struct ethtool_ops { int (*get_settings)(struct net_device *, struct ethtool_cmd *); @@ -777,7 +925,7 @@ struct ethtool_ops { int (*set_tso)(struct net_device *, u32); void (*self_test)(struct net_device *, struct ethtool_test *, u64 *); void (*get_strings)(struct net_device *, u32 stringset, u8 *); - int (*phys_id)(struct net_device *, u32); + int (*set_phys_id)(struct net_device *, enum ethtool_phys_id_state); void (*get_ethtool_stats)(struct net_device *, struct ethtool_stats *, u64 *); int (*begin)(struct net_device *); @@ -801,6 +949,13 @@ struct ethtool_ops { struct ethtool_rxfh_indir *); int (*set_rxfh_indir)(struct net_device *, const struct ethtool_rxfh_indir *); + void (*get_channels)(struct net_device *, struct ethtool_channels *); + int (*set_channels)(struct net_device *, struct ethtool_channels *); + int (*get_dump_flag)(struct net_device *, struct ethtool_dump *); + int (*get_dump_data)(struct net_device *, + struct ethtool_dump *, void *); + int (*set_dump)(struct net_device *, struct ethtool_dump *); + }; #endif /* __KERNEL__ */ @@ -869,6 +1024,11 @@ struct ethtool_ops { #define ETHTOOL_GFEATURES 0x0000003a /* Get device offload settings */ #define ETHTOOL_SFEATURES 0x0000003b /* Change device offload settings */ +#define ETHTOOL_GCHANNELS 0x0000003c /* Get no of channels */ +#define ETHTOOL_SCHANNELS 0x0000003d /* Set no of channels */ +#define ETHTOOL_SET_DUMP 0x0000003e /* Set dump settings */ +#define ETHTOOL_GET_DUMP_FLAG 0x0000003f /* Get dump settings */ +#define ETHTOOL_GET_DUMP_DATA 0x00000040 /* Get dump data */ /* compatibility with older code */ #define SPARC_ETH_GSET ETHTOOL_GSET @@ -896,6 +1056,8 @@ struct ethtool_ops { #define SUPPORTED_10000baseKX4_Full (1 << 18) #define SUPPORTED_10000baseKR_Full (1 << 19) #define SUPPORTED_10000baseR_FEC (1 << 20) +#define SUPPORTED_20000baseMLD2_Full (1 << 21) +#define SUPPORTED_20000baseKR2_Full (1 << 22) /* Indicates what features are advertised by the interface. */ #define ADVERTISED_10baseT_Half (1 << 0) @@ -919,6 +1081,8 @@ struct ethtool_ops { #define ADVERTISED_10000baseKX4_Full (1 << 18) #define ADVERTISED_10000baseKR_Full (1 << 19) #define ADVERTISED_10000baseR_FEC (1 << 20) +#define ADVERTISED_20000baseMLD2_Full (1 << 21) +#define ADVERTISED_20000baseKR2_Full (1 << 22) /* The following are all involved in forcing a particular link * mode for the device for setting things. When getting the @@ -991,6 +1155,8 @@ struct ethtool_ops { #define IPV4_FLOW 0x10 /* hash only */ #define IPV6_FLOW 0x11 /* hash only */ #define ETHER_FLOW 0x12 /* spec only (ether_spec) */ +/* Flag to enable additional fields in struct ethtool_rx_flow_spec */ +#define FLOW_EXT 0x80000000 /* L3-L4 network traffic flow hash options */ #define RXH_L2DA (1 << 1) diff --git a/include/linux/eventpoll.h b/include/linux/eventpoll.h index f6856a5a1d4b..f362733186a5 100644 --- a/include/linux/eventpoll.h +++ b/include/linux/eventpoll.h @@ -1,5 +1,5 @@ /* - * include/linux/eventpoll.h ( Efficent event polling implementation ) + * include/linux/eventpoll.h ( Efficient event polling implementation ) * Copyright (C) 2001,...,2006 Davide Libenzi * * This program is free software; you can redistribute it and/or modify diff --git a/include/linux/exportfs.h b/include/linux/exportfs.h index 33a42f24b275..3a4cef5322dc 100644 --- a/include/linux/exportfs.h +++ b/include/linux/exportfs.h @@ -120,7 +120,7 @@ struct fid { * encode_fh: * @encode_fh should store in the file handle fragment @fh (using at most * @max_len bytes) information that can be used by @decode_fh to recover the - * file refered to by the &struct dentry @de. If the @connectable flag is + * file referred to by the &struct dentry @de. If the @connectable flag is * set, the encode_fh() should store sufficient information so that a good * attempt can be made to find not only the file but also it's place in the * filesystem. This typically means storing a reference to de->d_parent in diff --git a/include/linux/fb.h b/include/linux/fb.h index b2a36391d2a1..6a8274877171 100644 --- a/include/linux/fb.h +++ b/include/linux/fb.h @@ -534,14 +534,14 @@ struct fb_cursor_user { #define FB_EVENT_GET_CONSOLE_MAP 0x07 /* CONSOLE-SPECIFIC: set console to framebuffer mapping */ #define FB_EVENT_SET_CONSOLE_MAP 0x08 -/* A hardware display blank change occured */ +/* A hardware display blank change occurred */ #define FB_EVENT_BLANK 0x09 /* Private modelist is to be replaced */ #define FB_EVENT_NEW_MODELIST 0x0A /* The resolution of the passed in fb_info about to change and all vc's should be changed */ #define FB_EVENT_MODE_CHANGE_ALL 0x0B -/* A software display blank change occured */ +/* A software display blank change occurred */ #define FB_EVENT_CONBLANK 0x0C /* Get drawing requirements */ #define FB_EVENT_GET_REQ 0x0D @@ -805,7 +805,7 @@ struct fb_tile_ops { /* A driver may set this flag to indicate that it does want a set_par to be * called every time when fbcon_switch is executed. The advantage is that with * this flag set you can really be sure that set_par is always called before - * any of the functions dependant on the correct hardware state or altering + * any of the functions dependent on the correct hardware state or altering * that state, even if you are using some broken X releases. The disadvantage * is that it introduces unwanted delays to every console switch if set_par * is slow. It is a good idea to try this flag in the drivers initialization @@ -832,6 +832,7 @@ struct fb_tile_ops { #define FBINFO_CAN_FORCE_OUTPUT 0x200000 struct fb_info { + atomic_t count; int node; int flags; struct mutex lock; /* Lock for open/release/ioctl funcs */ @@ -877,7 +878,7 @@ struct fb_info { void *fbcon_par; /* fbcon use-only private area */ /* From here on everything is device dependent */ void *par; - /* we need the PCI or similiar aperture base/size not + /* we need the PCI or similar aperture base/size not smem_start/size as smem_start may just be an object allocated inside the aperture so may not actually overlap */ struct apertures_struct { diff --git a/include/linux/filter.h b/include/linux/filter.h index 45266b75409a..4609b85e559d 100644 --- a/include/linux/filter.h +++ b/include/linux/filter.h @@ -135,6 +135,8 @@ struct sk_filter { atomic_t refcnt; unsigned int len; /* Number of filter blocks */ + unsigned int (*bpf_func)(const struct sk_buff *skb, + const struct sock_filter *filter); struct rcu_head rcu; struct sock_filter insns[0]; }; @@ -153,6 +155,80 @@ extern unsigned int sk_run_filter(const struct sk_buff *skb, extern int sk_attach_filter(struct sock_fprog *fprog, struct sock *sk); extern int sk_detach_filter(struct sock *sk); extern int sk_chk_filter(struct sock_filter *filter, int flen); + +#ifdef CONFIG_BPF_JIT +extern void bpf_jit_compile(struct sk_filter *fp); +extern void bpf_jit_free(struct sk_filter *fp); +#define SK_RUN_FILTER(FILTER, SKB) (*FILTER->bpf_func)(SKB, FILTER->insns) +#else +static inline void bpf_jit_compile(struct sk_filter *fp) +{ +} +static inline void bpf_jit_free(struct sk_filter *fp) +{ +} +#define SK_RUN_FILTER(FILTER, SKB) sk_run_filter(SKB, FILTER->insns) +#endif + +enum { + BPF_S_RET_K = 1, + BPF_S_RET_A, + BPF_S_ALU_ADD_K, + BPF_S_ALU_ADD_X, + BPF_S_ALU_SUB_K, + BPF_S_ALU_SUB_X, + BPF_S_ALU_MUL_K, + BPF_S_ALU_MUL_X, + BPF_S_ALU_DIV_X, + BPF_S_ALU_AND_K, + BPF_S_ALU_AND_X, + BPF_S_ALU_OR_K, + BPF_S_ALU_OR_X, + BPF_S_ALU_LSH_K, + BPF_S_ALU_LSH_X, + BPF_S_ALU_RSH_K, + BPF_S_ALU_RSH_X, + BPF_S_ALU_NEG, + BPF_S_LD_W_ABS, + BPF_S_LD_H_ABS, + BPF_S_LD_B_ABS, + BPF_S_LD_W_LEN, + BPF_S_LD_W_IND, + BPF_S_LD_H_IND, + BPF_S_LD_B_IND, + BPF_S_LD_IMM, + BPF_S_LDX_W_LEN, + BPF_S_LDX_B_MSH, + BPF_S_LDX_IMM, + BPF_S_MISC_TAX, + BPF_S_MISC_TXA, + BPF_S_ALU_DIV_K, + BPF_S_LD_MEM, + BPF_S_LDX_MEM, + BPF_S_ST, + BPF_S_STX, + BPF_S_JMP_JA, + BPF_S_JMP_JEQ_K, + BPF_S_JMP_JEQ_X, + BPF_S_JMP_JGE_K, + BPF_S_JMP_JGE_X, + BPF_S_JMP_JGT_K, + BPF_S_JMP_JGT_X, + BPF_S_JMP_JSET_K, + BPF_S_JMP_JSET_X, + /* Ancillary data */ + BPF_S_ANC_PROTOCOL, + BPF_S_ANC_PKTTYPE, + BPF_S_ANC_IFINDEX, + BPF_S_ANC_NLATTR, + BPF_S_ANC_NLATTR_NEST, + BPF_S_ANC_MARK, + BPF_S_ANC_QUEUE, + BPF_S_ANC_HATYPE, + BPF_S_ANC_RXHASH, + BPF_S_ANC_CPU, +}; + #endif /* __KERNEL__ */ #endif /* __LINUX_FILTER_H__ */ diff --git a/include/linux/firewire-cdev.h b/include/linux/firewire-cdev.h index 59ea406be7f6..4ff09889c5c0 100644 --- a/include/linux/firewire-cdev.h +++ b/include/linux/firewire-cdev.h @@ -900,7 +900,7 @@ struct fw_cdev_get_cycle_timer2 { /** * struct fw_cdev_allocate_iso_resource - (De)allocate a channel or bandwidth - * @closure: Passed back to userspace in correponding iso resource events + * @closure: Passed back to userspace in corresponding iso resource events * @channels: Isochronous channels of which one is to be (de)allocated * @bandwidth: Isochronous bandwidth units to be (de)allocated * @handle: Handle to the allocation, written by the kernel (only valid in diff --git a/include/linux/flex_array.h b/include/linux/flex_array.h index 70e4efabe0fb..ebeb2f3ad068 100644 --- a/include/linux/flex_array.h +++ b/include/linux/flex_array.h @@ -61,7 +61,7 @@ struct flex_array { struct flex_array *flex_array_alloc(int element_size, unsigned int total, gfp_t flags); int flex_array_prealloc(struct flex_array *fa, unsigned int start, - unsigned int end, gfp_t flags); + unsigned int nr_elements, gfp_t flags); void flex_array_free(struct flex_array *fa); void flex_array_free_parts(struct flex_array *fa); int flex_array_put(struct flex_array *fa, unsigned int element_nr, void *src, diff --git a/include/linux/fs.h b/include/linux/fs.h index b677bd77f2d6..cdf9495df204 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -357,6 +357,7 @@ struct inodes_stat_t { #define FS_TOPDIR_FL 0x00020000 /* Top of directory hierarchies*/ #define FS_EXTENT_FL 0x00080000 /* Extents */ #define FS_DIRECTIO_FL 0x00100000 /* Use direct i/o */ +#define FS_NOCOW_FL 0x00800000 /* Do not cow file */ #define FS_RESERVED_FL 0x80000000 /* reserved for ext2 lib */ #define FS_FL_USER_VISIBLE 0x0003DFFF /* User visible flags */ @@ -463,7 +464,7 @@ struct iattr { struct timespec ia_ctime; /* - * Not an attribute, but an auxilary info for filesystems wanting to + * Not an attribute, but an auxiliary info for filesystems wanting to * implement an ftruncate() like method. NOTE: filesystem should * check for (ia_valid & ATTR_FILE), and not for (ia_file != NULL). */ @@ -611,6 +612,8 @@ struct address_space_operations { int (*error_remove_page)(struct address_space *, struct page *); }; +extern const struct address_space_operations empty_aops; + /* * pagecache_write_begin/pagecache_write_end must be used by general code * to write into the pagecache. @@ -645,7 +648,7 @@ struct address_space { } __attribute__((aligned(sizeof(long)))); /* * On most architectures that alignment is already the case; but - * must be enforced here for CRIS, to let the least signficant bit + * must be enforced here for CRIS, to let the least significant bit * of struct page's "mapping" pointer be used for PAGE_MAPPING_ANON. */ diff --git a/include/linux/fscache-cache.h b/include/linux/fscache-cache.h index b8581c09d19f..76427e688d15 100644 --- a/include/linux/fscache-cache.h +++ b/include/linux/fscache-cache.h @@ -236,7 +236,7 @@ struct fscache_cache_ops { /* unpin an object in the cache */ void (*unpin_object)(struct fscache_object *object); - /* store the updated auxilliary data on an object */ + /* store the updated auxiliary data on an object */ void (*update_object)(struct fscache_object *object); /* discard the resources pinned by an object and effect retirement if diff --git a/include/linux/fscache.h b/include/linux/fscache.h index ec0dad5ab90f..7c4d72f5581f 100644 --- a/include/linux/fscache.h +++ b/include/linux/fscache.h @@ -102,9 +102,9 @@ struct fscache_cookie_def { */ void (*get_attr)(const void *cookie_netfs_data, uint64_t *size); - /* get the auxilliary data from netfs data + /* get the auxiliary data from netfs data * - this function can be absent if the index carries no state data - * - should store the auxilliary data in the buffer + * - should store the auxiliary data in the buffer * - should return the amount of amount stored * - not permitted to return an error * - the netfs data from the cookie being used as the source is @@ -117,7 +117,7 @@ struct fscache_cookie_def { /* consult the netfs about the state of an object * - this function can be absent if the index carries no state data * - the netfs data from the cookie being used as the target is - * presented, as is the auxilliary data + * presented, as is the auxiliary data */ enum fscache_checkaux (*check_aux)(void *cookie_netfs_data, const void *data, diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h index ca29e03c1fac..9d88e1cb5dbb 100644 --- a/include/linux/ftrace.h +++ b/include/linux/ftrace.h @@ -29,9 +29,22 @@ ftrace_enable_sysctl(struct ctl_table *table, int write, typedef void (*ftrace_func_t)(unsigned long ip, unsigned long parent_ip); +struct ftrace_hash; + +enum { + FTRACE_OPS_FL_ENABLED = 1 << 0, + FTRACE_OPS_FL_GLOBAL = 1 << 1, + FTRACE_OPS_FL_DYNAMIC = 1 << 2, +}; + struct ftrace_ops { - ftrace_func_t func; - struct ftrace_ops *next; + ftrace_func_t func; + struct ftrace_ops *next; + unsigned long flags; +#ifdef CONFIG_DYNAMIC_FTRACE + struct ftrace_hash *notrace_hash; + struct ftrace_hash *filter_hash; +#endif }; extern int function_trace_stop; @@ -146,14 +159,13 @@ extern void unregister_ftrace_function_probe_all(char *glob); extern int ftrace_text_reserved(void *start, void *end); enum { - FTRACE_FL_FREE = (1 << 0), - FTRACE_FL_FAILED = (1 << 1), - FTRACE_FL_FILTER = (1 << 2), - FTRACE_FL_ENABLED = (1 << 3), - FTRACE_FL_NOTRACE = (1 << 4), - FTRACE_FL_CONVERTED = (1 << 5), + FTRACE_FL_ENABLED = (1 << 30), + FTRACE_FL_FREE = (1 << 31), }; +#define FTRACE_FL_MASK (0x3UL << 30) +#define FTRACE_REF_MAX ((1 << 30) - 1) + struct dyn_ftrace { union { unsigned long ip; /* address of mcount call-site */ @@ -167,7 +179,12 @@ struct dyn_ftrace { }; int ftrace_force_update(void); -void ftrace_set_filter(unsigned char *buf, int len, int reset); +void ftrace_set_filter(struct ftrace_ops *ops, unsigned char *buf, + int len, int reset); +void ftrace_set_notrace(struct ftrace_ops *ops, unsigned char *buf, + int len, int reset); +void ftrace_set_global_filter(unsigned char *buf, int len, int reset); +void ftrace_set_global_notrace(unsigned char *buf, int len, int reset); int register_ftrace_command(struct ftrace_func_command *cmd); int unregister_ftrace_command(struct ftrace_func_command *cmd); diff --git a/include/linux/ftrace_event.h b/include/linux/ftrace_event.h index 22b32af1b5ec..b5a550a39a70 100644 --- a/include/linux/ftrace_event.h +++ b/include/linux/ftrace_event.h @@ -37,6 +37,7 @@ struct trace_entry { unsigned char flags; unsigned char preempt_count; int pid; + int padding; }; #define FTRACE_MAX_EVENT \ diff --git a/include/linux/gfp.h b/include/linux/gfp.h index bfb8f934521e..56d8fc87fbbc 100644 --- a/include/linux/gfp.h +++ b/include/linux/gfp.h @@ -353,6 +353,8 @@ extern unsigned long get_zeroed_page(gfp_t gfp_mask); void *alloc_pages_exact(size_t size, gfp_t gfp_mask); void free_pages_exact(void *virt, size_t size); +/* This is different from alloc_pages_exact_node !!! */ +void *alloc_pages_exact_nid(int nid, size_t size, gfp_t gfp_mask); #define __get_free_page(gfp_mask) \ __get_free_pages((gfp_mask), 0) diff --git a/include/linux/hid.h b/include/linux/hid.h index bb29bb1dbd2f..42f7e2fb501f 100644 --- a/include/linux/hid.h +++ b/include/linux/hid.h @@ -799,7 +799,7 @@ static inline int __must_check hid_parse(struct hid_device *hdev) * * Call this in probe function *after* hid_parse. This will setup HW buffers * and start the device (if not deffered to device open). hid_hw_stop must be - * called if this was successfull. + * called if this was successful. */ static inline int __must_check hid_hw_start(struct hid_device *hdev, unsigned int connect_mask) diff --git a/include/linux/hp_sdc.h b/include/linux/hp_sdc.h index 9db3d454887f..d392975d8887 100644 --- a/include/linux/hp_sdc.h +++ b/include/linux/hp_sdc.h @@ -101,7 +101,7 @@ int hp_sdc_dequeue_transaction(hp_sdc_transaction *this); #define HP_SDC_STATUS_REG 0x40 /* Data from an i8042 register */ #define HP_SDC_STATUS_HILCMD 0x50 /* Command from HIL MLC */ #define HP_SDC_STATUS_HILDATA 0x60 /* Data from HIL MLC */ -#define HP_SDC_STATUS_PUP 0x70 /* Sucessful power-up self test */ +#define HP_SDC_STATUS_PUP 0x70 /* Successful power-up self test */ #define HP_SDC_STATUS_KCOOKED 0x80 /* Key from cooked kbd */ #define HP_SDC_STATUS_KRPG 0xc0 /* Key from Repeat Gen */ #define HP_SDC_STATUS_KMOD_SUP 0x10 /* Shift key is up */ diff --git a/include/linux/huge_mm.h b/include/linux/huge_mm.h index df29c8fde36b..8847c8c29791 100644 --- a/include/linux/huge_mm.h +++ b/include/linux/huge_mm.h @@ -117,7 +117,7 @@ static inline void vma_adjust_trans_huge(struct vm_area_struct *vma, unsigned long end, long adjust_next) { - if (!vma->anon_vma || vma->vm_ops || vma->vm_file) + if (!vma->anon_vma || vma->vm_ops) return; __vma_adjust_trans_huge(vma, start, end, adjust_next); } diff --git a/include/linux/i2o.h b/include/linux/i2o.h index 9e7a12d6385d..a6deef4f4f67 100644 --- a/include/linux/i2o.h +++ b/include/linux/i2o.h @@ -826,7 +826,7 @@ static inline struct i2o_message __iomem *i2o_msg_in_to_virt(struct * @c: I2O controller * * This function tries to get a message frame. If no message frame is - * available do not wait until one is availabe (see also i2o_msg_get_wait). + * available do not wait until one is available (see also i2o_msg_get_wait). * The returned pointer to the message frame is not in I/O memory, it is * allocated from a mempool. But because a MFA is allocated from the * controller too it is guaranteed that i2o_msg_post() will never fail. diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index 2d1c6117d92c..b2eee5879883 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -884,6 +884,15 @@ struct ieee80211_ht_cap { #define IEEE80211_HT_CAP_40MHZ_INTOLERANT 0x4000 #define IEEE80211_HT_CAP_LSIG_TXOP_PROT 0x8000 +/* 802.11n HT extended capabilities masks (for extended_ht_cap_info) */ +#define IEEE80211_HT_EXT_CAP_PCO 0x0001 +#define IEEE80211_HT_EXT_CAP_PCO_TIME 0x0006 +#define IEEE80211_HT_EXT_CAP_PCO_TIME_SHIFT 1 +#define IEEE80211_HT_EXT_CAP_MCS_FB 0x0300 +#define IEEE80211_HT_EXT_CAP_MCS_FB_SHIFT 8 +#define IEEE80211_HT_EXT_CAP_HTC_SUP 0x0400 +#define IEEE80211_HT_EXT_CAP_RD_RESPONDER 0x0800 + /* 802.11n HT capability AMPDU settings (for ampdu_params_info) */ #define IEEE80211_HT_AMPDU_PARM_FACTOR 0x03 #define IEEE80211_HT_AMPDU_PARM_DENSITY 0x1C @@ -993,6 +1002,11 @@ struct ieee80211_ht_info { #define WLAN_CAPABILITY_ESS (1<<0) #define WLAN_CAPABILITY_IBSS (1<<1) + +/* A mesh STA sets the ESS and IBSS capability bits to zero */ +#define WLAN_CAPABILITY_IS_MBSS(cap) \ + (!((cap) & (WLAN_CAPABILITY_ESS | WLAN_CAPABILITY_IBSS))) + #define WLAN_CAPABILITY_CF_POLLABLE (1<<2) #define WLAN_CAPABILITY_CF_POLL_REQUEST (1<<3) #define WLAN_CAPABILITY_PRIVACY (1<<4) @@ -1252,9 +1266,8 @@ enum ieee80211_category { WLAN_CATEGORY_MULTIHOP_ACTION = 14, WLAN_CATEGORY_SELF_PROTECTED = 15, WLAN_CATEGORY_WMM = 17, - /* TODO: remove MESH_PLINK and MESH_PATH_SEL after */ - /* mesh is updated to current 802.11s draft */ - WLAN_CATEGORY_MESH_PLINK = 30, + /* TODO: remove MESH_PATH_SEL after mesh is updated + * to current 802.11s draft */ WLAN_CATEGORY_MESH_PATH_SEL = 32, WLAN_CATEGORY_VENDOR_SPECIFIC_PROTECTED = 126, WLAN_CATEGORY_VENDOR_SPECIFIC = 127, @@ -1507,6 +1520,7 @@ static inline bool ieee80211_is_robust_mgmt_frame(struct ieee80211_hdr *hdr) category = ((u8 *) hdr) + 24; return *category != WLAN_CATEGORY_PUBLIC && *category != WLAN_CATEGORY_HT && + *category != WLAN_CATEGORY_SELF_PROTECTED && *category != WLAN_CATEGORY_VENDOR_SPECIFIC; } diff --git a/include/linux/if_ether.h b/include/linux/if_ether.h index be69043d2896..0f1325d98295 100644 --- a/include/linux/if_ether.h +++ b/include/linux/if_ether.h @@ -136,6 +136,7 @@ int eth_header_parse(const struct sk_buff *skb, unsigned char *haddr); extern struct ctl_table ether_table[]; #endif +int mac_pton(const char *s, u8 *mac); extern ssize_t sysfs_format_mac(char *buf, const unsigned char *addr, int len); #endif diff --git a/include/linux/if_vlan.h b/include/linux/if_vlan.h index 635e1faec412..290bd8ac94cf 100644 --- a/include/linux/if_vlan.h +++ b/include/linux/if_vlan.h @@ -86,7 +86,6 @@ struct vlan_group { * the vlan is attached to. */ unsigned int nr_vlans; - int killall; struct hlist_node hlist; /* linked list */ struct net_device **vlan_devices_arrays[VLAN_GROUP_ARRAY_SPLIT_PARTS]; struct rcu_head rcu; @@ -132,7 +131,8 @@ extern u16 vlan_dev_vlan_id(const struct net_device *dev); extern int __vlan_hwaccel_rx(struct sk_buff *skb, struct vlan_group *grp, u16 vlan_tci, int polling); -extern bool vlan_hwaccel_do_receive(struct sk_buff **skb); +extern bool vlan_do_receive(struct sk_buff **skb); +extern struct sk_buff *vlan_untag(struct sk_buff *skb); extern gro_result_t vlan_gro_receive(struct napi_struct *napi, struct vlan_group *grp, unsigned int vlan_tci, struct sk_buff *skb); @@ -166,13 +166,18 @@ static inline int __vlan_hwaccel_rx(struct sk_buff *skb, struct vlan_group *grp, return NET_XMIT_SUCCESS; } -static inline bool vlan_hwaccel_do_receive(struct sk_buff **skb) +static inline bool vlan_do_receive(struct sk_buff **skb) { if ((*skb)->vlan_tci & VLAN_VID_MASK) (*skb)->pkt_type = PACKET_OTHERHOST; return false; } +static inline struct sk_buff *vlan_untag(struct sk_buff *skb) +{ + return skb; +} + static inline gro_result_t vlan_gro_receive(struct napi_struct *napi, struct vlan_group *grp, unsigned int vlan_tci, struct sk_buff *skb) diff --git a/include/linux/init.h b/include/linux/init.h index 577671c55153..9146f39cdddf 100644 --- a/include/linux/init.h +++ b/include/linux/init.h @@ -79,29 +79,29 @@ #define __exitused __used #endif -#define __exit __section(.exit.text) __exitused __cold +#define __exit __section(.exit.text) __exitused __cold notrace /* Used for HOTPLUG */ -#define __devinit __section(.devinit.text) __cold +#define __devinit __section(.devinit.text) __cold notrace #define __devinitdata __section(.devinit.data) #define __devinitconst __section(.devinit.rodata) -#define __devexit __section(.devexit.text) __exitused __cold +#define __devexit __section(.devexit.text) __exitused __cold notrace #define __devexitdata __section(.devexit.data) #define __devexitconst __section(.devexit.rodata) /* Used for HOTPLUG_CPU */ -#define __cpuinit __section(.cpuinit.text) __cold +#define __cpuinit __section(.cpuinit.text) __cold notrace #define __cpuinitdata __section(.cpuinit.data) #define __cpuinitconst __section(.cpuinit.rodata) -#define __cpuexit __section(.cpuexit.text) __exitused __cold +#define __cpuexit __section(.cpuexit.text) __exitused __cold notrace #define __cpuexitdata __section(.cpuexit.data) #define __cpuexitconst __section(.cpuexit.rodata) /* Used for MEMORY_HOTPLUG */ -#define __meminit __section(.meminit.text) __cold +#define __meminit __section(.meminit.text) __cold notrace #define __meminitdata __section(.meminit.data) #define __meminitconst __section(.meminit.rodata) -#define __memexit __section(.memexit.text) __exitused __cold +#define __memexit __section(.memexit.text) __exitused __cold notrace #define __memexitdata __section(.memexit.data) #define __memexitconst __section(.memexit.rodata) diff --git a/include/linux/init_task.h b/include/linux/init_task.h index caa151fbebb7..689496bb6654 100644 --- a/include/linux/init_task.h +++ b/include/linux/init_task.h @@ -134,7 +134,6 @@ extern struct cred init_cred; .stack = &init_thread_info, \ .usage = ATOMIC_INIT(2), \ .flags = PF_KTHREAD, \ - .lock_depth = -1, \ .prio = MAX_PRIO-20, \ .static_prio = MAX_PRIO-20, \ .normal_prio = MAX_PRIO-20, \ diff --git a/include/linux/input.h b/include/linux/input.h index 056ae8a5bd9b..771d6d85667d 100644 --- a/include/linux/input.h +++ b/include/linux/input.h @@ -167,6 +167,7 @@ struct input_keymap_entry { #define SYN_REPORT 0 #define SYN_CONFIG 1 #define SYN_MT_REPORT 2 +#define SYN_DROPPED 3 /* * Keys and buttons @@ -553,8 +554,8 @@ struct input_keymap_entry { #define KEY_DVD 0x185 /* Media Select DVD */ #define KEY_AUX 0x186 #define KEY_MP3 0x187 -#define KEY_AUDIO 0x188 -#define KEY_VIDEO 0x189 +#define KEY_AUDIO 0x188 /* AL Audio Browser */ +#define KEY_VIDEO 0x189 /* AL Movie Browser */ #define KEY_DIRECTORY 0x18a #define KEY_LIST 0x18b #define KEY_MEMO 0x18c /* Media Select Messages */ @@ -603,8 +604,9 @@ struct input_keymap_entry { #define KEY_FRAMEFORWARD 0x1b5 #define KEY_CONTEXT_MENU 0x1b6 /* GenDesc - system context menu */ #define KEY_MEDIA_REPEAT 0x1b7 /* Consumer - transport control */ -#define KEY_10CHANNELSUP 0x1b8 /* 10 channels up (10+) */ -#define KEY_10CHANNELSDOWN 0x1b9 /* 10 channels down (10-) */ +#define KEY_10CHANNELSUP 0x1b8 /* 10 channels up (10+) */ +#define KEY_10CHANNELSDOWN 0x1b9 /* 10 channels down (10-) */ +#define KEY_IMAGES 0x1ba /* AL Image Browser */ #define KEY_DEL_EOL 0x1c0 #define KEY_DEL_EOS 0x1c1 @@ -664,6 +666,13 @@ struct input_keymap_entry { #define KEY_TOUCHPAD_ON 0x213 #define KEY_TOUCHPAD_OFF 0x214 +#define KEY_CAMERA_ZOOMIN 0x215 +#define KEY_CAMERA_ZOOMOUT 0x216 +#define KEY_CAMERA_UP 0x217 +#define KEY_CAMERA_DOWN 0x218 +#define KEY_CAMERA_LEFT 0x219 +#define KEY_CAMERA_RIGHT 0x21a + #define BTN_TRIGGER_HAPPY 0x2c0 #define BTN_TRIGGER_HAPPY1 0x2c0 #define BTN_TRIGGER_HAPPY2 0x2c1 diff --git a/include/linux/input/mt.h b/include/linux/input/mt.h index b3ac06a4435d..318bb82325a6 100644 --- a/include/linux/input/mt.h +++ b/include/linux/input/mt.h @@ -48,6 +48,12 @@ static inline void input_mt_slot(struct input_dev *dev, int slot) input_event(dev, EV_ABS, ABS_MT_SLOT, slot); } +static inline bool input_is_mt_axis(int axis) +{ + return axis == ABS_MT_SLOT || + (axis >= ABS_MT_FIRST && axis <= ABS_MT_LAST); +} + void input_mt_report_slot_state(struct input_dev *dev, unsigned int tool_type, bool active); diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h index 59b72ca1c5d1..6c12989839d9 100644 --- a/include/linux/interrupt.h +++ b/include/linux/interrupt.h @@ -98,7 +98,7 @@ typedef irqreturn_t (*irq_handler_t)(int, void *); * @next: pointer to the next irqaction for shared interrupts * @irq: interrupt number * @dir: pointer to the proc/irq/NN/name entry - * @thread_fn: interupt handler function for threaded interrupts + * @thread_fn: interrupt handler function for threaded interrupts * @thread: thread pointer for threaded interrupts * @thread_flags: flags related to @thread * @thread_mask: bitmask for keeping track of @thread activity @@ -338,14 +338,6 @@ static inline void enable_irq_lockdep_irqrestore(unsigned int irq, unsigned long /* IRQ wakeup (PM) control: */ extern int irq_set_irq_wake(unsigned int irq, unsigned int on); -#ifndef CONFIG_GENERIC_HARDIRQS_NO_COMPAT -/* Please do not use: Use the replacement functions instead */ -static inline int set_irq_wake(unsigned int irq, unsigned int on) -{ - return irq_set_irq_wake(irq, on); -} -#endif - static inline int enable_irq_wake(unsigned int irq) { return irq_set_irq_wake(irq, 1); @@ -422,7 +414,6 @@ enum TASKLET_SOFTIRQ, SCHED_SOFTIRQ, HRTIMER_SOFTIRQ, - RCU_SOFTIRQ, /* Preferable RCU should always be the last softirq */ NR_SOFTIRQS }; @@ -492,7 +483,7 @@ extern void __send_remote_softirq(struct call_single_data *cp, int cpu, Properties: * If tasklet_schedule() is called, then tasklet is guaranteed to be executed on some cpu at least once after this. - * If the tasklet is already scheduled, but its excecution is still not + * If the tasklet is already scheduled, but its execution is still not started, it will be executed only once. * If this tasklet is already running on another CPU (or schedule is called from tasklet itself), it is rescheduled for later. diff --git a/include/linux/ipmi.h b/include/linux/ipmi.h index 045f2f275cd0..ca85cf894e33 100644 --- a/include/linux/ipmi.h +++ b/include/linux/ipmi.h @@ -111,7 +111,7 @@ struct ipmi_ipmb_addr { * A LAN Address. This is an address to/from a LAN interface bridged * by the BMC, not an address actually out on the LAN. * - * A concious decision was made here to deviate slightly from the IPMI + * A conscious decision was made here to deviate slightly from the IPMI * spec. We do not use rqSWID and rsSWID like it shows in the * message. Instead, we use remote_SWID and local_SWID. This means * that any message (a request or response) from another device will @@ -259,7 +259,7 @@ struct ipmi_recv_msg { void (*done)(struct ipmi_recv_msg *msg); /* Place-holder for the data, don't make any assumptions about - the size or existance of this, since it may change. */ + the size or existence of this, since it may change. */ unsigned char msg_data[IPMI_MAX_MSG_LENGTH]; }; diff --git a/include/linux/irq.h b/include/linux/irq.h index 5d876c9b3a3d..8b4538446636 100644 --- a/include/linux/irq.h +++ b/include/linux/irq.h @@ -53,24 +53,18 @@ typedef void (*irq_preflow_handler_t)(struct irq_data *data); * Bits which can be modified via irq_set/clear/modify_status_flags() * IRQ_LEVEL - Interrupt is level type. Will be also * updated in the code when the above trigger - * bits are modified via set_irq_type() + * bits are modified via irq_set_irq_type() * IRQ_PER_CPU - Mark an interrupt PER_CPU. Will protect * it from affinity setting * IRQ_NOPROBE - Interrupt cannot be probed by autoprobing * IRQ_NOREQUEST - Interrupt cannot be requested via * request_irq() + * IRQ_NOTHREAD - Interrupt cannot be threaded * IRQ_NOAUTOEN - Interrupt is not automatically enabled in * request/setup_irq() * IRQ_NO_BALANCING - Interrupt cannot be balanced (affinity set) * IRQ_MOVE_PCNTXT - Interrupt can be migrated from process context * IRQ_NESTED_TRHEAD - Interrupt nests into another thread - * - * Deprecated bits. They are kept updated as long as - * CONFIG_GENERIC_HARDIRQS_NO_COMPAT is not set. Will go away soon. These bits - * are internal state of the core code and if you really need to acces - * them then talk to the genirq maintainer instead of hacking - * something weird. - * */ enum { IRQ_TYPE_NONE = 0x00000000, @@ -92,18 +86,7 @@ enum { IRQ_NO_BALANCING = (1 << 13), IRQ_MOVE_PCNTXT = (1 << 14), IRQ_NESTED_THREAD = (1 << 15), - -#ifndef CONFIG_GENERIC_HARDIRQS_NO_COMPAT - IRQ_INPROGRESS = (1 << 16), - IRQ_REPLAY = (1 << 17), - IRQ_WAITING = (1 << 18), - IRQ_DISABLED = (1 << 19), - IRQ_PENDING = (1 << 20), - IRQ_MASKED = (1 << 21), - IRQ_MOVE_PENDING = (1 << 22), - IRQ_AFFINITY_SET = (1 << 23), - IRQ_WAKEUP = (1 << 24), -#endif + IRQ_NOTHREAD = (1 << 16), }; #define IRQF_MODIFY_MASK \ @@ -135,7 +118,7 @@ struct msi_desc; * struct irq_data - per irq and irq chip data passed down to chip functions * @irq: interrupt number * @node: node index useful for balancing - * @state_use_accessor: status information for irq chip functions. + * @state_use_accessors: status information for irq chip functions. * Use accessor functions to deal with it * @chip: low level interrupt hardware access * @handler_data: per-IRQ data for the irq_chip methods @@ -174,6 +157,9 @@ struct irq_data { * from suspend * IRDQ_MOVE_PCNTXT - Interrupt can be moved in process * context + * IRQD_IRQ_DISABLED - Disabled state of the interrupt + * IRQD_IRQ_MASKED - Masked state of the interrupt + * IRQD_IRQ_INPROGRESS - In progress state of the interrupt */ enum { IRQD_TRIGGER_MASK = 0xf, @@ -184,6 +170,9 @@ enum { IRQD_LEVEL = (1 << 13), IRQD_WAKEUP_STATE = (1 << 14), IRQD_MOVE_PCNTXT = (1 << 15), + IRQD_IRQ_DISABLED = (1 << 16), + IRQD_IRQ_MASKED = (1 << 17), + IRQD_IRQ_INPROGRESS = (1 << 18), }; static inline bool irqd_is_setaffinity_pending(struct irq_data *d) @@ -206,6 +195,11 @@ static inline bool irqd_affinity_was_set(struct irq_data *d) return d->state_use_accessors & IRQD_AFFINITY_SET; } +static inline void irqd_mark_affinity_was_set(struct irq_data *d) +{ + d->state_use_accessors |= IRQD_AFFINITY_SET; +} + static inline u32 irqd_get_trigger_type(struct irq_data *d) { return d->state_use_accessors & IRQD_TRIGGER_MASK; @@ -235,27 +229,40 @@ static inline bool irqd_can_move_in_process_context(struct irq_data *d) return d->state_use_accessors & IRQD_MOVE_PCNTXT; } +static inline bool irqd_irq_disabled(struct irq_data *d) +{ + return d->state_use_accessors & IRQD_IRQ_DISABLED; +} + +static inline bool irqd_irq_masked(struct irq_data *d) +{ + return d->state_use_accessors & IRQD_IRQ_MASKED; +} + +static inline bool irqd_irq_inprogress(struct irq_data *d) +{ + return d->state_use_accessors & IRQD_IRQ_INPROGRESS; +} + +/* + * Functions for chained handlers which can be enabled/disabled by the + * standard disable_irq/enable_irq calls. Must be called with + * irq_desc->lock held. + */ +static inline void irqd_set_chained_irq_inprogress(struct irq_data *d) +{ + d->state_use_accessors |= IRQD_IRQ_INPROGRESS; +} + +static inline void irqd_clr_chained_irq_inprogress(struct irq_data *d) +{ + d->state_use_accessors &= ~IRQD_IRQ_INPROGRESS; +} + /** * struct irq_chip - hardware interrupt chip descriptor * * @name: name for /proc/interrupts - * @startup: deprecated, replaced by irq_startup - * @shutdown: deprecated, replaced by irq_shutdown - * @enable: deprecated, replaced by irq_enable - * @disable: deprecated, replaced by irq_disable - * @ack: deprecated, replaced by irq_ack - * @mask: deprecated, replaced by irq_mask - * @mask_ack: deprecated, replaced by irq_mask_ack - * @unmask: deprecated, replaced by irq_unmask - * @eoi: deprecated, replaced by irq_eoi - * @end: deprecated, will go away with __do_IRQ() - * @set_affinity: deprecated, replaced by irq_set_affinity - * @retrigger: deprecated, replaced by irq_retrigger - * @set_type: deprecated, replaced by irq_set_type - * @set_wake: deprecated, replaced by irq_wake - * @bus_lock: deprecated, replaced by irq_bus_lock - * @bus_sync_unlock: deprecated, replaced by irq_bus_sync_unlock - * * @irq_startup: start up the interrupt (defaults to ->enable if NULL) * @irq_shutdown: shut down the interrupt (defaults to ->disable if NULL) * @irq_enable: enable the interrupt (defaults to chip->unmask if NULL) @@ -271,6 +278,11 @@ static inline bool irqd_can_move_in_process_context(struct irq_data *d) * @irq_set_wake: enable/disable power-management wake-on of an IRQ * @irq_bus_lock: function to lock access to slow bus (i2c) chips * @irq_bus_sync_unlock:function to sync and unlock slow bus (i2c) chips + * @irq_cpu_online: configure an interrupt source for a secondary CPU + * @irq_cpu_offline: un-configure an interrupt source for a secondary CPU + * @irq_suspend: function called from core code on suspend once per chip + * @irq_resume: function called from core code on resume once per chip + * @irq_pm_shutdown: function called from core code on shutdown once per chip * @irq_print_chip: optional to print special chip info in show_interrupts * @flags: chip specific flags * @@ -278,28 +290,6 @@ static inline bool irqd_can_move_in_process_context(struct irq_data *d) */ struct irq_chip { const char *name; -#ifndef CONFIG_GENERIC_HARDIRQS_NO_DEPRECATED - unsigned int (*startup)(unsigned int irq); - void (*shutdown)(unsigned int irq); - void (*enable)(unsigned int irq); - void (*disable)(unsigned int irq); - - void (*ack)(unsigned int irq); - void (*mask)(unsigned int irq); - void (*mask_ack)(unsigned int irq); - void (*unmask)(unsigned int irq); - void (*eoi)(unsigned int irq); - - void (*end)(unsigned int irq); - int (*set_affinity)(unsigned int irq, - const struct cpumask *dest); - int (*retrigger)(unsigned int irq); - int (*set_type)(unsigned int irq, unsigned int flow_type); - int (*set_wake)(unsigned int irq, unsigned int on); - - void (*bus_lock)(unsigned int irq); - void (*bus_sync_unlock)(unsigned int irq); -#endif unsigned int (*irq_startup)(struct irq_data *data); void (*irq_shutdown)(struct irq_data *data); void (*irq_enable)(struct irq_data *data); @@ -319,6 +309,13 @@ struct irq_chip { void (*irq_bus_lock)(struct irq_data *data); void (*irq_bus_sync_unlock)(struct irq_data *data); + void (*irq_cpu_online)(struct irq_data *data); + void (*irq_cpu_offline)(struct irq_data *data); + + void (*irq_suspend)(struct irq_data *data); + void (*irq_resume)(struct irq_data *data); + void (*irq_pm_shutdown)(struct irq_data *data); + void (*irq_print_chip)(struct irq_data *data, struct seq_file *p); unsigned long flags; @@ -335,11 +332,14 @@ struct irq_chip { * IRQCHIP_SET_TYPE_MASKED: Mask before calling chip.irq_set_type() * IRQCHIP_EOI_IF_HANDLED: Only issue irq_eoi() when irq was handled * IRQCHIP_MASK_ON_SUSPEND: Mask non wake irqs in the suspend path + * IRQCHIP_ONOFFLINE_ENABLED: Only call irq_on/off_line callbacks + * when irq enabled */ enum { IRQCHIP_SET_TYPE_MASKED = (1 << 0), IRQCHIP_EOI_IF_HANDLED = (1 << 1), IRQCHIP_MASK_ON_SUSPEND = (1 << 2), + IRQCHIP_ONOFFLINE_ENABLED = (1 << 3), }; /* This include will go away once we isolated irq_desc usage to core code */ @@ -364,25 +364,22 @@ struct irqaction; extern int setup_irq(unsigned int irq, struct irqaction *new); extern void remove_irq(unsigned int irq, struct irqaction *act); +extern void irq_cpu_online(void); +extern void irq_cpu_offline(void); +extern int __irq_set_affinity_locked(struct irq_data *data, const struct cpumask *cpumask); + #ifdef CONFIG_GENERIC_HARDIRQS #if defined(CONFIG_SMP) && defined(CONFIG_GENERIC_PENDING_IRQ) -void move_native_irq(int irq); -void move_masked_irq(int irq); void irq_move_irq(struct irq_data *data); void irq_move_masked_irq(struct irq_data *data); #else -static inline void move_native_irq(int irq) { } -static inline void move_masked_irq(int irq) { } static inline void irq_move_irq(struct irq_data *data) { } static inline void irq_move_masked_irq(struct irq_data *data) { } #endif extern int no_irq_affinity; -/* Handle irq action chains: */ -extern irqreturn_t handle_IRQ_event(unsigned int irq, struct irqaction *action); - /* * Built-in IRQ handlers for various IRQ types, * callable via desc->handle_irq() @@ -390,6 +387,7 @@ extern irqreturn_t handle_IRQ_event(unsigned int irq, struct irqaction *action); extern void handle_level_irq(unsigned int irq, struct irq_desc *desc); extern void handle_fasteoi_irq(unsigned int irq, struct irq_desc *desc); extern void handle_edge_irq(unsigned int irq, struct irq_desc *desc); +extern void handle_edge_eoi_irq(unsigned int irq, struct irq_desc *desc); extern void handle_simple_irq(unsigned int irq, struct irq_desc *desc); extern void handle_percpu_irq(unsigned int irq, struct irq_desc *desc); extern void handle_bad_irq(unsigned int irq, struct irq_desc *desc); @@ -433,7 +431,7 @@ irq_set_handler(unsigned int irq, irq_flow_handler_t handle) /* * Set a highlevel chained flow handler for a given IRQ. * (a chained handler is automatically enabled and set to - * IRQ_NOREQUEST and IRQ_NOPROBE) + * IRQ_NOREQUEST, IRQ_NOPROBE, and IRQ_NOTHREAD) */ static inline void irq_set_chained_handler(unsigned int irq, irq_flow_handler_t handle) @@ -463,6 +461,16 @@ static inline void irq_set_probe(unsigned int irq) irq_modify_status(irq, IRQ_NOPROBE, 0); } +static inline void irq_set_nothread(unsigned int irq) +{ + irq_modify_status(irq, 0, IRQ_NOTHREAD); +} + +static inline void irq_set_thread(unsigned int irq) +{ + irq_modify_status(irq, IRQ_NOTHREAD, 0); +} + static inline void irq_set_nested_thread(unsigned int irq, bool nest) { if (nest) @@ -538,89 +546,6 @@ static inline struct msi_desc *irq_data_get_msi(struct irq_data *d) return d->msi_desc; } -#ifndef CONFIG_GENERIC_HARDIRQS_NO_COMPAT -/* Please do not use: Use the replacement functions instead */ -static inline int set_irq_chip(unsigned int irq, struct irq_chip *chip) -{ - return irq_set_chip(irq, chip); -} -static inline int set_irq_data(unsigned int irq, void *data) -{ - return irq_set_handler_data(irq, data); -} -static inline int set_irq_chip_data(unsigned int irq, void *data) -{ - return irq_set_chip_data(irq, data); -} -static inline int set_irq_type(unsigned int irq, unsigned int type) -{ - return irq_set_irq_type(irq, type); -} -static inline int set_irq_msi(unsigned int irq, struct msi_desc *entry) -{ - return irq_set_msi_desc(irq, entry); -} -static inline struct irq_chip *get_irq_chip(unsigned int irq) -{ - return irq_get_chip(irq); -} -static inline void *get_irq_chip_data(unsigned int irq) -{ - return irq_get_chip_data(irq); -} -static inline void *get_irq_data(unsigned int irq) -{ - return irq_get_handler_data(irq); -} -static inline void *irq_data_get_irq_data(struct irq_data *d) -{ - return irq_data_get_irq_handler_data(d); -} -static inline struct msi_desc *get_irq_msi(unsigned int irq) -{ - return irq_get_msi_desc(irq); -} -static inline void set_irq_noprobe(unsigned int irq) -{ - irq_set_noprobe(irq); -} -static inline void set_irq_probe(unsigned int irq) -{ - irq_set_probe(irq); -} -static inline void set_irq_nested_thread(unsigned int irq, int nest) -{ - irq_set_nested_thread(irq, nest); -} -static inline void -set_irq_chip_and_handler_name(unsigned int irq, struct irq_chip *chip, - irq_flow_handler_t handle, const char *name) -{ - irq_set_chip_and_handler_name(irq, chip, handle, name); -} -static inline void -set_irq_chip_and_handler(unsigned int irq, struct irq_chip *chip, - irq_flow_handler_t handle) -{ - irq_set_chip_and_handler(irq, chip, handle); -} -static inline void -__set_irq_handler(unsigned int irq, irq_flow_handler_t handle, int is_chained, - const char *name) -{ - __irq_set_handler(irq, handle, is_chained, name); -} -static inline void set_irq_handler(unsigned int irq, irq_flow_handler_t handle) -{ - irq_set_handler(irq, handle); -} -static inline void -set_irq_chained_handler(unsigned int irq, irq_flow_handler_t handle) -{ - irq_set_chained_handler(irq, handle); -} -#endif - int irq_alloc_descs(int irq, unsigned int from, unsigned int cnt, int node); void irq_free_descs(unsigned int irq, unsigned int cnt); int irq_reserve_irqs(unsigned int from, unsigned int cnt); @@ -650,6 +575,145 @@ static inline int irq_reserve_irq(unsigned int irq) return irq_reserve_irqs(irq, 1); } +#ifndef irq_reg_writel +# define irq_reg_writel(val, addr) writel(val, addr) +#endif +#ifndef irq_reg_readl +# define irq_reg_readl(addr) readl(addr) +#endif + +/** + * struct irq_chip_regs - register offsets for struct irq_gci + * @enable: Enable register offset to reg_base + * @disable: Disable register offset to reg_base + * @mask: Mask register offset to reg_base + * @ack: Ack register offset to reg_base + * @eoi: Eoi register offset to reg_base + * @type: Type configuration register offset to reg_base + * @polarity: Polarity configuration register offset to reg_base + */ +struct irq_chip_regs { + unsigned long enable; + unsigned long disable; + unsigned long mask; + unsigned long ack; + unsigned long eoi; + unsigned long type; + unsigned long polarity; +}; + +/** + * struct irq_chip_type - Generic interrupt chip instance for a flow type + * @chip: The real interrupt chip which provides the callbacks + * @regs: Register offsets for this chip + * @handler: Flow handler associated with this chip + * @type: Chip can handle these flow types + * + * A irq_generic_chip can have several instances of irq_chip_type when + * it requires different functions and register offsets for different + * flow types. + */ +struct irq_chip_type { + struct irq_chip chip; + struct irq_chip_regs regs; + irq_flow_handler_t handler; + u32 type; +}; + +/** + * struct irq_chip_generic - Generic irq chip data structure + * @lock: Lock to protect register and cache data access + * @reg_base: Register base address (virtual) + * @irq_base: Interrupt base nr for this chip + * @irq_cnt: Number of interrupts handled by this chip + * @mask_cache: Cached mask register + * @type_cache: Cached type register + * @polarity_cache: Cached polarity register + * @wake_enabled: Interrupt can wakeup from suspend + * @wake_active: Interrupt is marked as an wakeup from suspend source + * @num_ct: Number of available irq_chip_type instances (usually 1) + * @private: Private data for non generic chip callbacks + * @list: List head for keeping track of instances + * @chip_types: Array of interrupt irq_chip_types + * + * Note, that irq_chip_generic can have multiple irq_chip_type + * implementations which can be associated to a particular irq line of + * an irq_chip_generic instance. That allows to share and protect + * state in an irq_chip_generic instance when we need to implement + * different flow mechanisms (level/edge) for it. + */ +struct irq_chip_generic { + raw_spinlock_t lock; + void __iomem *reg_base; + unsigned int irq_base; + unsigned int irq_cnt; + u32 mask_cache; + u32 type_cache; + u32 polarity_cache; + u32 wake_enabled; + u32 wake_active; + unsigned int num_ct; + void *private; + struct list_head list; + struct irq_chip_type chip_types[0]; +}; + +/** + * enum irq_gc_flags - Initialization flags for generic irq chips + * @IRQ_GC_INIT_MASK_CACHE: Initialize the mask_cache by reading mask reg + * @IRQ_GC_INIT_NESTED_LOCK: Set the lock class of the irqs to nested for + * irq chips which need to call irq_set_wake() on + * the parent irq. Usually GPIO implementations + */ +enum irq_gc_flags { + IRQ_GC_INIT_MASK_CACHE = 1 << 0, + IRQ_GC_INIT_NESTED_LOCK = 1 << 1, +}; + +/* Generic chip callback functions */ +void irq_gc_noop(struct irq_data *d); +void irq_gc_mask_disable_reg(struct irq_data *d); +void irq_gc_mask_set_bit(struct irq_data *d); +void irq_gc_mask_clr_bit(struct irq_data *d); +void irq_gc_unmask_enable_reg(struct irq_data *d); +void irq_gc_ack(struct irq_data *d); +void irq_gc_mask_disable_reg_and_ack(struct irq_data *d); +void irq_gc_eoi(struct irq_data *d); +int irq_gc_set_wake(struct irq_data *d, unsigned int on); + +/* Setup functions for irq_chip_generic */ +struct irq_chip_generic * +irq_alloc_generic_chip(const char *name, int nr_ct, unsigned int irq_base, + void __iomem *reg_base, irq_flow_handler_t handler); +void irq_setup_generic_chip(struct irq_chip_generic *gc, u32 msk, + enum irq_gc_flags flags, unsigned int clr, + unsigned int set); +int irq_setup_alt_chip(struct irq_data *d, unsigned int type); +void irq_remove_generic_chip(struct irq_chip_generic *gc, u32 msk, + unsigned int clr, unsigned int set); + +static inline struct irq_chip_type *irq_data_get_chip_type(struct irq_data *d) +{ + return container_of(d->chip, struct irq_chip_type, chip); +} + +#define IRQ_MSK(n) (u32)((n) < 32 ? ((1 << (n)) - 1) : UINT_MAX) + +#ifdef CONFIG_SMP +static inline void irq_gc_lock(struct irq_chip_generic *gc) +{ + raw_spin_lock(&gc->lock); +} + +static inline void irq_gc_unlock(struct irq_chip_generic *gc) +{ + raw_spin_unlock(&gc->lock); +} +#else +static inline void irq_gc_lock(struct irq_chip_generic *gc) { } +static inline void irq_gc_unlock(struct irq_chip_generic *gc) { } +#endif + #endif /* CONFIG_GENERIC_HARDIRQS */ #endif /* !CONFIG_S390 */ diff --git a/include/linux/irqdesc.h b/include/linux/irqdesc.h index 15e6c3905f41..2d921b35212c 100644 --- a/include/linux/irqdesc.h +++ b/include/linux/irqdesc.h @@ -16,16 +16,18 @@ struct timer_rand_state; * @irq_data: per irq and chip data passed down to chip functions * @timer_rand_state: pointer to timer rand state struct * @kstat_irqs: irq stats per cpu - * @handle_irq: highlevel irq-events handler [if NULL, __do_IRQ()] + * @handle_irq: highlevel irq-events handler + * @preflow_handler: handler called before the flow handler (currently used by sparc) * @action: the irq action chain * @status: status information * @core_internal_state__do_not_mess_with_it: core internal status information * @depth: disable-depth, for nested irq_disable() calls - * @wake_depth: enable depth, for multiple set_irq_wake() callers + * @wake_depth: enable depth, for multiple irq_set_irq_wake() callers * @irq_count: stats field to detect stalled irqs * @last_unhandled: aging timer for unhandled count * @irqs_unhandled: stats field for spurious unhandled interrupts * @lock: locking for SMP + * @affinity_hint: hint to user space for preferred irq affinity * @affinity_notify: context for notification of affinity changes * @pending_mask: pending rebalanced interrupts * @threads_oneshot: bitfield to handle shared oneshot threads @@ -35,32 +37,7 @@ struct timer_rand_state; * @name: flow handler name for /proc/interrupts output */ struct irq_desc { - -#ifdef CONFIG_GENERIC_HARDIRQS_NO_DEPRECATED struct irq_data irq_data; -#else - /* - * This union will go away, once we fixed the direct access to - * irq_desc all over the place. The direct fields are a 1:1 - * overlay of irq_data. - */ - union { - struct irq_data irq_data; - struct { - unsigned int irq; - unsigned int node; - unsigned int pad_do_not_even_think_about_it; - struct irq_chip *chip; - void *handler_data; - void *chip_data; - struct msi_desc *msi_desc; -#ifdef CONFIG_SMP - cpumask_var_t affinity; -#endif - }; - }; -#endif - struct timer_rand_state *timer_rand_state; unsigned int __percpu *kstat_irqs; irq_flow_handler_t handle_irq; @@ -68,11 +45,7 @@ struct irq_desc { irq_preflow_handler_t preflow_handler; #endif struct irqaction *action; /* IRQ action list */ -#ifdef CONFIG_GENERIC_HARDIRQS_NO_COMPAT unsigned int status_use_accessors; -#else - unsigned int status; /* IRQ status */ -#endif unsigned int core_internal_state__do_not_mess_with_it; unsigned int depth; /* nested irq disables */ unsigned int wake_depth; /* nested wake enables */ @@ -127,27 +100,6 @@ static inline struct msi_desc *irq_desc_get_msi_desc(struct irq_desc *desc) return desc->irq_data.msi_desc; } -#ifndef CONFIG_GENERIC_HARDIRQS_NO_COMPAT -static inline struct irq_chip *get_irq_desc_chip(struct irq_desc *desc) -{ - return irq_desc_get_chip(desc); -} -static inline void *get_irq_desc_data(struct irq_desc *desc) -{ - return irq_desc_get_handler_data(desc); -} - -static inline void *get_irq_desc_chip_data(struct irq_desc *desc) -{ - return irq_desc_get_chip_data(desc); -} - -static inline struct msi_desc *get_irq_desc_msi(struct irq_desc *desc) -{ - return irq_desc_get_msi_desc(desc); -} -#endif - /* * Architectures call this to let the generic IRQ layer * handle an interrupt. If the descriptor is attached to an @@ -159,10 +111,7 @@ static inline void generic_handle_irq_desc(unsigned int irq, struct irq_desc *de desc->handle_irq(irq, desc); } -static inline void generic_handle_irq(unsigned int irq) -{ - generic_handle_irq_desc(irq, irq_to_desc(irq)); -} +int generic_handle_irq(unsigned int irq); /* Test to see if a driver has successfully requested an irq */ static inline int irq_has_action(unsigned int irq) @@ -194,21 +143,13 @@ __irq_set_chip_handler_name_locked(unsigned int irq, struct irq_chip *chip, desc->name = name; } -#ifndef CONFIG_GENERIC_HARDIRQS_NO_COMPAT -static inline void __set_irq_handler_unlocked(int irq, - irq_flow_handler_t handler) -{ - __irq_set_handler_locked(irq, handler); -} - static inline int irq_balancing_disabled(unsigned int irq) { struct irq_desc *desc; desc = irq_to_desc(irq); - return desc->status & IRQ_NO_BALANCING_MASK; + return desc->status_use_accessors & IRQ_NO_BALANCING_MASK; } -#endif static inline void irq_set_lockdep_class(unsigned int irq, struct lock_class_key *class) diff --git a/include/linux/isdn/hdlc.h b/include/linux/isdn/hdlc.h index 4b3ecc40889a..96521370c782 100644 --- a/include/linux/isdn/hdlc.h +++ b/include/linux/isdn/hdlc.h @@ -2,7 +2,7 @@ * hdlc.h -- General purpose ISDN HDLC decoder. * * Implementation of a HDLC decoder/encoder in software. - * Neccessary because some ISDN devices don't have HDLC + * Necessary because some ISDN devices don't have HDLC * controllers. * * Copyright (C) diff --git a/include/linux/ixjuser.h b/include/linux/ixjuser.h index 88b45895746d..94ab5e942e53 100644 --- a/include/linux/ixjuser.h +++ b/include/linux/ixjuser.h @@ -50,7 +50,7 @@ * IOCTL's used for the Quicknet Telephony Cards * * If you use the IXJCTL_TESTRAM command, the card must be power cycled to -* reset the SRAM values before futher use. +* reset the SRAM values before further use. * ******************************************************************************/ diff --git a/include/linux/jiffies.h b/include/linux/jiffies.h index 922aa313c9f9..f97672a36fa8 100644 --- a/include/linux/jiffies.h +++ b/include/linux/jiffies.h @@ -42,7 +42,7 @@ /* LATCH is used in the interval timer and ftape setup. */ #define LATCH ((CLOCK_TICK_RATE + HZ/2) / HZ) /* For divider */ -/* Suppose we want to devide two numbers NOM and DEN: NOM/DEN, then we can +/* Suppose we want to divide two numbers NOM and DEN: NOM/DEN, then we can * improve accuracy by shifting LSH bits, hence calculating: * (NOM << LSH) / DEN * This however means trouble for large NOM, because (NOM << LSH) may no diff --git a/include/linux/jump_label.h b/include/linux/jump_label.h index 7880f18e4b86..83e745f3ead7 100644 --- a/include/linux/jump_label.h +++ b/include/linux/jump_label.h @@ -1,20 +1,43 @@ #ifndef _LINUX_JUMP_LABEL_H #define _LINUX_JUMP_LABEL_H +#include <linux/types.h> +#include <linux/compiler.h> + #if defined(CC_HAVE_ASM_GOTO) && defined(CONFIG_JUMP_LABEL) + +struct jump_label_key { + atomic_t enabled; + struct jump_entry *entries; +#ifdef CONFIG_MODULES + struct jump_label_mod *next; +#endif +}; + # include <asm/jump_label.h> # define HAVE_JUMP_LABEL #endif enum jump_label_type { + JUMP_LABEL_DISABLE = 0, JUMP_LABEL_ENABLE, - JUMP_LABEL_DISABLE }; struct module; #ifdef HAVE_JUMP_LABEL +#ifdef CONFIG_MODULES +#define JUMP_LABEL_INIT {{ 0 }, NULL, NULL} +#else +#define JUMP_LABEL_INIT {{ 0 }, NULL} +#endif + +static __always_inline bool static_branch(struct jump_label_key *key) +{ + return arch_static_branch(key); +} + extern struct jump_entry __start___jump_table[]; extern struct jump_entry __stop___jump_table[]; @@ -23,37 +46,37 @@ extern void jump_label_unlock(void); extern void arch_jump_label_transform(struct jump_entry *entry, enum jump_label_type type); extern void arch_jump_label_text_poke_early(jump_label_t addr); -extern void jump_label_update(unsigned long key, enum jump_label_type type); -extern void jump_label_apply_nops(struct module *mod); extern int jump_label_text_reserved(void *start, void *end); +extern void jump_label_inc(struct jump_label_key *key); +extern void jump_label_dec(struct jump_label_key *key); +extern bool jump_label_enabled(struct jump_label_key *key); +extern void jump_label_apply_nops(struct module *mod); -#define jump_label_enable(key) \ - jump_label_update((unsigned long)key, JUMP_LABEL_ENABLE); +#else -#define jump_label_disable(key) \ - jump_label_update((unsigned long)key, JUMP_LABEL_DISABLE); +#include <asm/atomic.h> -#else +#define JUMP_LABEL_INIT {ATOMIC_INIT(0)} -#define JUMP_LABEL(key, label) \ -do { \ - if (unlikely(*key)) \ - goto label; \ -} while (0) +struct jump_label_key { + atomic_t enabled; +}; -#define jump_label_enable(cond_var) \ -do { \ - *(cond_var) = 1; \ -} while (0) +static __always_inline bool static_branch(struct jump_label_key *key) +{ + if (unlikely(atomic_read(&key->enabled))) + return true; + return false; +} -#define jump_label_disable(cond_var) \ -do { \ - *(cond_var) = 0; \ -} while (0) +static inline void jump_label_inc(struct jump_label_key *key) +{ + atomic_inc(&key->enabled); +} -static inline int jump_label_apply_nops(struct module *mod) +static inline void jump_label_dec(struct jump_label_key *key) { - return 0; + atomic_dec(&key->enabled); } static inline int jump_label_text_reserved(void *start, void *end) @@ -64,16 +87,16 @@ static inline int jump_label_text_reserved(void *start, void *end) static inline void jump_label_lock(void) {} static inline void jump_label_unlock(void) {} -#endif +static inline bool jump_label_enabled(struct jump_label_key *key) +{ + return !!atomic_read(&key->enabled); +} -#define COND_STMT(key, stmt) \ -do { \ - __label__ jl_enabled; \ - JUMP_LABEL(key, jl_enabled); \ - if (0) { \ -jl_enabled: \ - stmt; \ - } \ -} while (0) +static inline int jump_label_apply_nops(struct module *mod) +{ + return 0; +} + +#endif #endif diff --git a/include/linux/jump_label_ref.h b/include/linux/jump_label_ref.h deleted file mode 100644 index e5d012ad92c6..000000000000 --- a/include/linux/jump_label_ref.h +++ /dev/null @@ -1,44 +0,0 @@ -#ifndef _LINUX_JUMP_LABEL_REF_H -#define _LINUX_JUMP_LABEL_REF_H - -#include <linux/jump_label.h> -#include <asm/atomic.h> - -#ifdef HAVE_JUMP_LABEL - -static inline void jump_label_inc(atomic_t *key) -{ - if (atomic_add_return(1, key) == 1) - jump_label_enable(key); -} - -static inline void jump_label_dec(atomic_t *key) -{ - if (atomic_dec_and_test(key)) - jump_label_disable(key); -} - -#else /* !HAVE_JUMP_LABEL */ - -static inline void jump_label_inc(atomic_t *key) -{ - atomic_inc(key); -} - -static inline void jump_label_dec(atomic_t *key) -{ - atomic_dec(key); -} - -#undef JUMP_LABEL -#define JUMP_LABEL(key, label) \ -do { \ - if (unlikely(__builtin_choose_expr( \ - __builtin_types_compatible_p(typeof(key), atomic_t *), \ - atomic_read((atomic_t *)(key)), *(key)))) \ - goto label; \ -} while (0) - -#endif /* HAVE_JUMP_LABEL */ - -#endif /* _LINUX_JUMP_LABEL_REF_H */ diff --git a/include/linux/kernel.h b/include/linux/kernel.h index 00cec4dc0ae2..f37ba716ef8b 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -283,6 +283,7 @@ extern char *get_options(const char *str, int nints, int *ints); extern unsigned long long memparse(const char *ptr, char **retptr); extern int core_kernel_text(unsigned long addr); +extern int core_kernel_data(unsigned long addr); extern int __kernel_text_address(unsigned long addr); extern int kernel_text_address(unsigned long addr); extern int func_ptr_is_kernel_text(void *ptr); diff --git a/include/linux/kexec.h b/include/linux/kexec.h index 03e8e8dbc577..c2478a342cd7 100644 --- a/include/linux/kexec.h +++ b/include/linux/kexec.h @@ -208,6 +208,7 @@ int __init parse_crashkernel(char *cmdline, unsigned long long system_ram, unsigned long long *crash_size, unsigned long long *crash_base); int crash_shrink_memory(unsigned long new_size); size_t crash_get_memory_size(void); +void crash_free_reserved_phys_range(unsigned long begin, unsigned long end); #else /* !CONFIG_KEXEC */ struct pt_regs; diff --git a/include/linux/kmod.h b/include/linux/kmod.h index 6efd7a78de6a..310231823852 100644 --- a/include/linux/kmod.h +++ b/include/linux/kmod.h @@ -113,5 +113,6 @@ extern void usermodehelper_init(void); extern int usermodehelper_disable(void); extern void usermodehelper_enable(void); +extern bool usermodehelper_is_disabled(void); #endif /* __LINUX_KMOD_H__ */ diff --git a/include/linux/ktime.h b/include/linux/ktime.h index e1ceaa9b36bb..603bec2913b0 100644 --- a/include/linux/ktime.h +++ b/include/linux/ktime.h @@ -35,7 +35,7 @@ * * On 32-bit CPUs an optimized representation of the timespec structure * is used to avoid expensive conversions from and to timespecs. The - * endian-aware order of the tv struct members is choosen to allow + * endian-aware order of the tv struct members is chosen to allow * mathematical operations on the tv64 member of the union too, which * for certain operations produces better code. * @@ -158,7 +158,7 @@ static inline ktime_t ktime_set(const long secs, const unsigned long nsecs) * @lhs: minuend * @rhs: subtrahend * - * Returns the remainder of the substraction + * Returns the remainder of the subtraction */ static inline ktime_t ktime_sub(const ktime_t lhs, const ktime_t rhs) { diff --git a/include/linux/led-lm3530.h b/include/linux/led-lm3530.h index bb69d20da0dc..58592fa67d24 100644 --- a/include/linux/led-lm3530.h +++ b/include/linux/led-lm3530.h @@ -41,7 +41,7 @@ #define LM3530_RAMP_TIME_8s (7) /* ALS Resistor Select */ -#define LM3530_ALS_IMPD_Z (0x00) /* ALS Impedence */ +#define LM3530_ALS_IMPD_Z (0x00) /* ALS Impedance */ #define LM3530_ALS_IMPD_13_53kOhm (0x01) #define LM3530_ALS_IMPD_9_01kOhm (0x02) #define LM3530_ALS_IMPD_5_41kOhm (0x03) diff --git a/include/linux/libata.h b/include/linux/libata.h index c71f46960f39..5a9926b34072 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -137,8 +137,6 @@ enum { ATA_DFLAG_ACPI_PENDING = (1 << 5), /* ACPI resume action pending */ ATA_DFLAG_ACPI_FAILED = (1 << 6), /* ACPI on devcfg has failed */ ATA_DFLAG_AN = (1 << 7), /* AN configured */ - ATA_DFLAG_HIPM = (1 << 8), /* device supports HIPM */ - ATA_DFLAG_DIPM = (1 << 9), /* device supports DIPM */ ATA_DFLAG_DMADIR = (1 << 10), /* device requires DMADIR */ ATA_DFLAG_CFG_MASK = (1 << 12) - 1, @@ -198,6 +196,7 @@ enum { * management */ ATA_FLAG_SW_ACTIVITY = (1 << 22), /* driver supports sw activity * led */ + ATA_FLAG_NO_DIPM = (1 << 23), /* host not happy with DIPM */ /* bits 24:31 of ap->flags are reserved for LLD specific flags */ @@ -364,7 +363,7 @@ enum { ATA_EH_CMD_TIMEOUT_TABLE_SIZE = 6, /* Horkage types. May be set by libata or controller on drives - (some horkage may be drive/controller pair dependant */ + (some horkage may be drive/controller pair dependent */ ATA_HORKAGE_DIAGNOSTIC = (1 << 0), /* Failed boot diag */ ATA_HORKAGE_NODMA = (1 << 1), /* DMA problems */ @@ -1152,6 +1151,7 @@ extern void ata_do_eh(struct ata_port *ap, ata_prereset_fn_t prereset, ata_reset_fn_t softreset, ata_reset_fn_t hardreset, ata_postreset_fn_t postreset); extern void ata_std_error_handler(struct ata_port *ap); +extern int ata_link_nr_enabled(struct ata_link *link); /* * Base operations to inherit from and initializers for sht diff --git a/include/linux/list.h b/include/linux/list.h index 3a54266a1e85..cc6d2aa6b415 100644 --- a/include/linux/list.h +++ b/include/linux/list.h @@ -4,7 +4,7 @@ #include <linux/types.h> #include <linux/stddef.h> #include <linux/poison.h> -#include <linux/prefetch.h> +#include <linux/const.h> /* * Simple doubly linked list implementation. @@ -367,18 +367,15 @@ static inline void list_splice_tail_init(struct list_head *list, * @head: the head for your list. */ #define list_for_each(pos, head) \ - for (pos = (head)->next; prefetch(pos->next), pos != (head); \ - pos = pos->next) + for (pos = (head)->next; pos != (head); pos = pos->next) /** * __list_for_each - iterate over a list * @pos: the &struct list_head to use as a loop cursor. * @head: the head for your list. * - * This variant differs from list_for_each() in that it's the - * simplest possible list iteration code, no prefetching is done. - * Use this for code that knows the list to be very short (empty - * or 1 entry) most of the time. + * This variant doesn't differ from list_for_each() any more. + * We don't do prefetching in either case. */ #define __list_for_each(pos, head) \ for (pos = (head)->next; pos != (head); pos = pos->next) @@ -389,8 +386,7 @@ static inline void list_splice_tail_init(struct list_head *list, * @head: the head for your list. */ #define list_for_each_prev(pos, head) \ - for (pos = (head)->prev; prefetch(pos->prev), pos != (head); \ - pos = pos->prev) + for (pos = (head)->prev; pos != (head); pos = pos->prev) /** * list_for_each_safe - iterate over a list safe against removal of list entry @@ -410,7 +406,7 @@ static inline void list_splice_tail_init(struct list_head *list, */ #define list_for_each_prev_safe(pos, n, head) \ for (pos = (head)->prev, n = pos->prev; \ - prefetch(pos->prev), pos != (head); \ + pos != (head); \ pos = n, n = pos->prev) /** @@ -421,7 +417,7 @@ static inline void list_splice_tail_init(struct list_head *list, */ #define list_for_each_entry(pos, head, member) \ for (pos = list_entry((head)->next, typeof(*pos), member); \ - prefetch(pos->member.next), &pos->member != (head); \ + &pos->member != (head); \ pos = list_entry(pos->member.next, typeof(*pos), member)) /** @@ -432,7 +428,7 @@ static inline void list_splice_tail_init(struct list_head *list, */ #define list_for_each_entry_reverse(pos, head, member) \ for (pos = list_entry((head)->prev, typeof(*pos), member); \ - prefetch(pos->member.prev), &pos->member != (head); \ + &pos->member != (head); \ pos = list_entry(pos->member.prev, typeof(*pos), member)) /** @@ -457,7 +453,7 @@ static inline void list_splice_tail_init(struct list_head *list, */ #define list_for_each_entry_continue(pos, head, member) \ for (pos = list_entry(pos->member.next, typeof(*pos), member); \ - prefetch(pos->member.next), &pos->member != (head); \ + &pos->member != (head); \ pos = list_entry(pos->member.next, typeof(*pos), member)) /** @@ -471,7 +467,7 @@ static inline void list_splice_tail_init(struct list_head *list, */ #define list_for_each_entry_continue_reverse(pos, head, member) \ for (pos = list_entry(pos->member.prev, typeof(*pos), member); \ - prefetch(pos->member.prev), &pos->member != (head); \ + &pos->member != (head); \ pos = list_entry(pos->member.prev, typeof(*pos), member)) /** @@ -483,7 +479,7 @@ static inline void list_splice_tail_init(struct list_head *list, * Iterate over list of given type, continuing from current position. */ #define list_for_each_entry_from(pos, head, member) \ - for (; prefetch(pos->member.next), &pos->member != (head); \ + for (; &pos->member != (head); \ pos = list_entry(pos->member.next, typeof(*pos), member)) /** @@ -664,8 +660,7 @@ static inline void hlist_move_list(struct hlist_head *old, #define hlist_entry(ptr, type, member) container_of(ptr,type,member) #define hlist_for_each(pos, head) \ - for (pos = (head)->first; pos && ({ prefetch(pos->next); 1; }); \ - pos = pos->next) + for (pos = (head)->first; pos ; pos = pos->next) #define hlist_for_each_safe(pos, n, head) \ for (pos = (head)->first; pos && ({ n = pos->next; 1; }); \ @@ -680,7 +675,7 @@ static inline void hlist_move_list(struct hlist_head *old, */ #define hlist_for_each_entry(tpos, pos, head, member) \ for (pos = (head)->first; \ - pos && ({ prefetch(pos->next); 1;}) && \ + pos && \ ({ tpos = hlist_entry(pos, typeof(*tpos), member); 1;}); \ pos = pos->next) @@ -692,7 +687,7 @@ static inline void hlist_move_list(struct hlist_head *old, */ #define hlist_for_each_entry_continue(tpos, pos, member) \ for (pos = (pos)->next; \ - pos && ({ prefetch(pos->next); 1;}) && \ + pos && \ ({ tpos = hlist_entry(pos, typeof(*tpos), member); 1;}); \ pos = pos->next) @@ -703,7 +698,7 @@ static inline void hlist_move_list(struct hlist_head *old, * @member: the name of the hlist_node within the struct. */ #define hlist_for_each_entry_from(tpos, pos, member) \ - for (; pos && ({ prefetch(pos->next); 1;}) && \ + for (; pos && \ ({ tpos = hlist_entry(pos, typeof(*tpos), member); 1;}); \ pos = pos->next) diff --git a/include/linux/list_bl.h b/include/linux/list_bl.h index 5bad17d1acde..31f9d75adc5b 100644 --- a/include/linux/list_bl.h +++ b/include/linux/list_bl.h @@ -2,6 +2,7 @@ #define _LINUX_LIST_BL_H #include <linux/list.h> +#include <linux/bit_spinlock.h> /* * Special version of lists, where head of the list has a lock in the lowest @@ -114,6 +115,16 @@ static inline void hlist_bl_del_init(struct hlist_bl_node *n) } } +static inline void hlist_bl_lock(struct hlist_bl_head *b) +{ + bit_spin_lock(0, (unsigned long *)b); +} + +static inline void hlist_bl_unlock(struct hlist_bl_head *b) +{ + __bit_spin_unlock(0, (unsigned long *)b); +} + /** * hlist_bl_for_each_entry - iterate over list of given type * @tpos: the type * to use as a loop cursor. diff --git a/include/linux/lru_cache.h b/include/linux/lru_cache.h index 78fbf24f357a..6a4fab7c6e09 100644 --- a/include/linux/lru_cache.h +++ b/include/linux/lru_cache.h @@ -148,7 +148,7 @@ write intent log information, three of which are mentioned here. * * DRBD currently (May 2009) only uses 61 elements on the resync lru_cache * (total memory usage 2 pages), and up to 3833 elements on the act_log - * lru_cache, totalling ~215 kB for 64bit architechture, ~53 pages. + * lru_cache, totalling ~215 kB for 64bit architecture, ~53 pages. * * We usually do not actually free these objects again, but only "recycle" * them, as the change "index: -old_label, +LC_FREE" would need a transaction diff --git a/include/linux/memcontrol.h b/include/linux/memcontrol.h index 5a5ce7055839..5e9840f50980 100644 --- a/include/linux/memcontrol.h +++ b/include/linux/memcontrol.h @@ -216,7 +216,7 @@ static inline void mem_cgroup_del_lru_list(struct page *page, int lru) return ; } -static inline inline void mem_cgroup_rotate_reclaimable_page(struct page *page) +static inline void mem_cgroup_rotate_reclaimable_page(struct page *page) { return ; } diff --git a/include/linux/mfd/ab8500.h b/include/linux/mfd/ab8500.h index 56f8dea72152..b31843075198 100644 --- a/include/linux/mfd/ab8500.h +++ b/include/linux/mfd/ab8500.h @@ -74,6 +74,45 @@ #define AB8500_INT_ACC_DETECT_21DB_F 37 #define AB8500_INT_ACC_DETECT_21DB_R 38 #define AB8500_INT_GP_SW_ADC_CONV_END 39 +#define AB8500_INT_ACC_DETECT_1DB_F 33 +#define AB8500_INT_ACC_DETECT_1DB_R 34 +#define AB8500_INT_ACC_DETECT_22DB_F 35 +#define AB8500_INT_ACC_DETECT_22DB_R 36 +#define AB8500_INT_ACC_DETECT_21DB_F 37 +#define AB8500_INT_ACC_DETECT_21DB_R 38 +#define AB8500_INT_GP_SW_ADC_CONV_END 39 +#define AB8500_INT_GPIO6R 40 +#define AB8500_INT_GPIO7R 41 +#define AB8500_INT_GPIO8R 42 +#define AB8500_INT_GPIO9R 43 +#define AB8500_INT_GPIO10R 44 +#define AB8500_INT_GPIO11R 45 +#define AB8500_INT_GPIO12R 46 +#define AB8500_INT_GPIO13R 47 +#define AB8500_INT_GPIO24R 48 +#define AB8500_INT_GPIO25R 49 +#define AB8500_INT_GPIO36R 50 +#define AB8500_INT_GPIO37R 51 +#define AB8500_INT_GPIO38R 52 +#define AB8500_INT_GPIO39R 53 +#define AB8500_INT_GPIO40R 54 +#define AB8500_INT_GPIO41R 55 +#define AB8500_INT_GPIO6F 56 +#define AB8500_INT_GPIO7F 57 +#define AB8500_INT_GPIO8F 58 +#define AB8500_INT_GPIO9F 59 +#define AB8500_INT_GPIO10F 60 +#define AB8500_INT_GPIO11F 61 +#define AB8500_INT_GPIO12F 62 +#define AB8500_INT_GPIO13F 63 +#define AB8500_INT_GPIO24F 64 +#define AB8500_INT_GPIO25F 65 +#define AB8500_INT_GPIO36F 66 +#define AB8500_INT_GPIO37F 67 +#define AB8500_INT_GPIO38F 68 +#define AB8500_INT_GPIO39F 69 +#define AB8500_INT_GPIO40F 70 +#define AB8500_INT_GPIO41F 71 #define AB8500_INT_ADP_SOURCE_ERROR 72 #define AB8500_INT_ADP_SINK_ERROR 73 #define AB8500_INT_ADP_PROBE_PLUG 74 @@ -139,19 +178,27 @@ struct ab8500 { u8 oldmask[AB8500_NUM_IRQ_REGS]; }; +struct regulator_reg_init; struct regulator_init_data; +struct ab8500_gpio_platform_data; /** * struct ab8500_platform_data - AB8500 platform data * @irq_base: start of AB8500 IRQs, AB8500_NR_IRQS will be used * @init: board-specific initialization after detection of ab8500 + * @num_regulator_reg_init: number of regulator init registers + * @regulator_reg_init: regulator init registers + * @num_regulator: number of regulators * @regulator: machine-specific constraints for regulators */ struct ab8500_platform_data { int irq_base; void (*init) (struct ab8500 *); + int num_regulator_reg_init; + struct ab8500_regulator_reg_init *regulator_reg_init; int num_regulator; struct regulator_init_data *regulator; + struct ab8500_gpio_platform_data *gpio; }; extern int __devinit ab8500_init(struct ab8500 *ab8500); diff --git a/include/linux/mfd/ab8500/gpio.h b/include/linux/mfd/ab8500/gpio.h new file mode 100644 index 000000000000..488a8c920a29 --- /dev/null +++ b/include/linux/mfd/ab8500/gpio.h @@ -0,0 +1,21 @@ +/* + * Copyright ST-Ericsson 2010. + * + * Author: Bibek Basu <bibek.basu@stericsson.com> + * Licensed under GPLv2. + */ + +#ifndef _AB8500_GPIO_H +#define _AB8500_GPIO_H + +/* + * Platform data to register a block: only the initial gpio/irq number. + */ + +struct ab8500_gpio_platform_data { + int gpio_base; + u32 irq_base; + u8 config_reg[7]; +}; + +#endif /* _AB8500_GPIO_H */ diff --git a/include/linux/mfd/core.h b/include/linux/mfd/core.h index 1408bf8eed5f..aef23309a742 100644 --- a/include/linux/mfd/core.h +++ b/include/linux/mfd/core.h @@ -63,21 +63,48 @@ extern int mfd_cell_enable(struct platform_device *pdev); extern int mfd_cell_disable(struct platform_device *pdev); /* + * "Clone" multiple platform devices for a single cell. This is to be used + * for devices that have multiple users of a cell. For example, if an mfd + * driver wants the cell "foo" to be used by a GPIO driver, an MTD driver, + * and a platform driver, the following bit of code would be use after first + * calling mfd_add_devices(): + * + * const char *fclones[] = { "foo-gpio", "foo-mtd" }; + * err = mfd_clone_cells("foo", fclones, ARRAY_SIZE(fclones)); + * + * Each driver (MTD, GPIO, and platform driver) would then register + * platform_drivers for "foo-mtd", "foo-gpio", and "foo", respectively. + * The cell's .enable/.disable hooks should be used to deal with hardware + * resource contention. + */ +extern int mfd_clone_cell(const char *cell, const char **clones, + size_t n_clones); + +/* * Given a platform device that's been created by mfd_add_devices(), fetch * the mfd_cell that created it. */ static inline const struct mfd_cell *mfd_get_cell(struct platform_device *pdev) { - return pdev->dev.platform_data; + return pdev->mfd_cell; } /* * Given a platform device that's been created by mfd_add_devices(), fetch * the .mfd_data entry from the mfd_cell that created it. + * Otherwise just return the platform_data pointer. + * This maintains compatibility with platform drivers whose devices aren't + * created by the mfd layer, and expect platform_data to contain what would've + * otherwise been in mfd_data. */ static inline void *mfd_get_data(struct platform_device *pdev) { - return mfd_get_cell(pdev)->mfd_data; + const struct mfd_cell *cell = mfd_get_cell(pdev); + + if (cell) + return cell->mfd_data; + else + return pdev->dev.platform_data; } extern int mfd_add_devices(struct device *parent, int id, @@ -87,13 +114,4 @@ extern int mfd_add_devices(struct device *parent, int id, extern void mfd_remove_devices(struct device *parent); -/* - * For MFD drivers with clients sharing access to resources, these create - * multiple platform devices per cell. Contention handling must still be - * handled via drivers (ie, with enable/disable hooks). - */ -extern int mfd_shared_platform_driver_register(struct platform_driver *drv, - const char *cellname); -extern void mfd_shared_platform_driver_unregister(struct platform_driver *drv); - #endif diff --git a/include/linux/mfd/max8997-private.h b/include/linux/mfd/max8997-private.h index 93a9477e075f..69d1010e2e51 100644 --- a/include/linux/mfd/max8997-private.h +++ b/include/linux/mfd/max8997-private.h @@ -24,6 +24,8 @@ #include <linux/i2c.h> +#define MAX8997_REG_INVALID (0xff) + enum max8997_pmic_reg { MAX8997_REG_PMIC_ID0 = 0x00, MAX8997_REG_PMIC_ID1 = 0x01, @@ -313,6 +315,7 @@ enum max8997_irq { #define MAX8997_REG_BUCK2DVS(x) (MAX8997_REG_BUCK2DVS1 + (x) - 1) #define MAX8997_REG_BUCK5DVS(x) (MAX8997_REG_BUCK5DVS1 + (x) - 1) +#define MAX8997_NUM_GPIO 12 struct max8997_dev { struct device *dev; struct i2c_client *i2c; /* 0xcc / PMIC, Battery Control, and FLASH */ @@ -324,11 +327,19 @@ struct max8997_dev { int type; struct platform_device *battery; /* battery control (not fuel gauge) */ + int irq; + int ono; + int irq_base; bool wakeup; + struct mutex irqlock; + int irq_masks_cur[MAX8997_IRQ_GROUP_NR]; + int irq_masks_cache[MAX8997_IRQ_GROUP_NR]; /* For hibernation */ u8 reg_dump[MAX8997_REG_PMIC_END + MAX8997_MUIC_REG_END + MAX8997_HAPTIC_REG_END]; + + bool gpio_status[MAX8997_NUM_GPIO]; }; enum max8997_types { @@ -336,6 +347,10 @@ enum max8997_types { TYPE_MAX8966, }; +extern int max8997_irq_init(struct max8997_dev *max8997); +extern void max8997_irq_exit(struct max8997_dev *max8997); +extern int max8997_irq_resume(struct max8997_dev *max8997); + extern int max8997_read_reg(struct i2c_client *i2c, u8 reg, u8 *dest); extern int max8997_bulk_read(struct i2c_client *i2c, u8 reg, int count, u8 *buf); @@ -344,4 +359,10 @@ extern int max8997_bulk_write(struct i2c_client *i2c, u8 reg, int count, u8 *buf); extern int max8997_update_reg(struct i2c_client *i2c, u8 reg, u8 val, u8 mask); +#define MAX8997_GPIO_INT_BOTH (0x3 << 4) +#define MAX8997_GPIO_INT_RISE (0x2 << 4) +#define MAX8997_GPIO_INT_FALL (0x1 << 4) + +#define MAX8997_GPIO_INT_MASK (0x3 << 4) +#define MAX8997_GPIO_DATA_MASK (0x1 << 2) #endif /* __LINUX_MFD_MAX8997_PRIV_H */ diff --git a/include/linux/mfd/max8997.h b/include/linux/mfd/max8997.h index cb671b3451bf..60931d089422 100644 --- a/include/linux/mfd/max8997.h +++ b/include/linux/mfd/max8997.h @@ -78,8 +78,11 @@ struct max8997_regulator_data { }; struct max8997_platform_data { - bool wakeup; - /* IRQ: Not implemented */ + /* IRQ */ + int irq_base; + int ono; + int wakeup; + /* ---- PMIC ---- */ struct max8997_regulator_data *regulators; int num_regulators; diff --git a/include/linux/mfd/wm831x/pdata.h b/include/linux/mfd/wm831x/pdata.h index afe4db49402d..632d1567a1b6 100644 --- a/include/linux/mfd/wm831x/pdata.h +++ b/include/linux/mfd/wm831x/pdata.h @@ -81,7 +81,9 @@ struct wm831x_touch_pdata { int rpu; /** Pen down sensitivity resistor divider */ int pressure; /** Report pressure (boolean) */ unsigned int data_irq; /** Touch data ready IRQ */ + int data_irqf; /** IRQ flags for data ready IRQ */ unsigned int pd_irq; /** Touch pendown detect IRQ */ + int pd_irqf; /** IRQ flags for pen down IRQ */ }; enum wm831x_watchdog_action { diff --git a/include/linux/mfd/wm8350/pmic.h b/include/linux/mfd/wm8350/pmic.h index e786fe9841ef..579b50ca2e02 100644 --- a/include/linux/mfd/wm8350/pmic.h +++ b/include/linux/mfd/wm8350/pmic.h @@ -1,5 +1,5 @@ /* - * pmic.h -- Power Managment Driver for Wolfson WM8350 PMIC + * pmic.h -- Power Management Driver for Wolfson WM8350 PMIC * * Copyright 2007 Wolfson Microelectronics PLC * diff --git a/include/linux/mm.h b/include/linux/mm.h index 7606d7db96c9..6507dde38b16 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -137,7 +137,8 @@ extern unsigned int kobjsize(const void *objp); #define VM_RandomReadHint(v) ((v)->vm_flags & VM_RAND_READ) /* - * special vmas that are non-mergable, non-mlock()able + * Special vmas that are non-mergable, non-mlock()able. + * Note: mm/huge_memory.c VM_NO_THP depends on this definition. */ #define VM_SPECIAL (VM_IO | VM_DONTEXPAND | VM_RESERVED | VM_PFNMAP) @@ -608,7 +609,7 @@ static inline pte_t maybe_mkwrite(pte_t pte, struct vm_area_struct *vma) #endif /* - * Define the bit shifts to access each section. For non-existant + * Define the bit shifts to access each section. For non-existent * sections we define the shift as 0; that plus a 0 mask ensures * the compiler will optimise away reference to them. */ @@ -1010,11 +1011,33 @@ int set_page_dirty_lock(struct page *page); int clear_page_dirty_for_io(struct page *page); /* Is the vma a continuation of the stack vma above it? */ -static inline int vma_stack_continue(struct vm_area_struct *vma, unsigned long addr) +static inline int vma_growsdown(struct vm_area_struct *vma, unsigned long addr) { return vma && (vma->vm_end == addr) && (vma->vm_flags & VM_GROWSDOWN); } +static inline int stack_guard_page_start(struct vm_area_struct *vma, + unsigned long addr) +{ + return (vma->vm_flags & VM_GROWSDOWN) && + (vma->vm_start == addr) && + !vma_growsdown(vma->vm_prev, addr); +} + +/* Is the vma a continuation of the stack vma below it? */ +static inline int vma_growsup(struct vm_area_struct *vma, unsigned long addr) +{ + return vma && (vma->vm_start == addr) && (vma->vm_flags & VM_GROWSUP); +} + +static inline int stack_guard_page_end(struct vm_area_struct *vma, + unsigned long addr) +{ + return (vma->vm_flags & VM_GROWSUP) && + (vma->vm_end == addr) && + !vma_growsup(vma->vm_next, addr); +} + extern unsigned long move_page_tables(struct vm_area_struct *vma, unsigned long old_addr, struct vm_area_struct *new_vma, unsigned long new_addr, unsigned long len); diff --git a/include/linux/mmc/dw_mmc.h b/include/linux/mmc/dw_mmc.h index c0207a770476..bdd7ceeb99e4 100644 --- a/include/linux/mmc/dw_mmc.h +++ b/include/linux/mmc/dw_mmc.h @@ -98,7 +98,7 @@ struct mmc_data; * EVENT_DATA_COMPLETE is set in @pending_events, all data-related * interrupts must be disabled and @data_status updated with a * snapshot of SR. Similarly, before EVENT_CMD_COMPLETE is set, the - * CMDRDY interupt must be disabled and @cmd_status updated with a + * CMDRDY interrupt must be disabled and @cmd_status updated with a * snapshot of SR, and before EVENT_XFER_COMPLETE can be set, the * bytes_xfered field of @data must be written. This is ensured by * using barriers. @@ -172,7 +172,7 @@ struct dw_mci_dma_ops { #define DW_MCI_QUIRK_IDMAC_DTO BIT(0) /* delay needed between retries on some 2.11a implementations */ #define DW_MCI_QUIRK_RETRY_DELAY BIT(1) -/* High Speed Capable - Supports HS cards (upto 50MHz) */ +/* High Speed Capable - Supports HS cards (up to 50MHz) */ #define DW_MCI_QUIRK_HIGHSPEED BIT(2) /* Unreliable card detection */ #define DW_MCI_QUIRK_BROKEN_CARD_DETECTION BIT(3) diff --git a/include/linux/mfd/sh_mobile_sdhi.h b/include/linux/mmc/sh_mobile_sdhi.h index c981b959760f..c981b959760f 100644 --- a/include/linux/mfd/sh_mobile_sdhi.h +++ b/include/linux/mmc/sh_mobile_sdhi.h diff --git a/include/linux/mmc/tmio.h b/include/linux/mmc/tmio.h new file mode 100644 index 000000000000..19490b942db0 --- /dev/null +++ b/include/linux/mmc/tmio.h @@ -0,0 +1,63 @@ +/* + * include/linux/mmc/tmio.h + * + * Copyright (C) 2007 Ian Molton + * Copyright (C) 2004 Ian Molton + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Driver for the MMC / SD / SDIO cell found in: + * + * TC6393XB TC6391XB TC6387XB T7L66XB ASIC3 + */ +#ifndef _LINUX_MMC_TMIO_H_ +#define _LINUX_MMC_TMIO_H_ + +#define CTL_SD_CMD 0x00 +#define CTL_ARG_REG 0x04 +#define CTL_STOP_INTERNAL_ACTION 0x08 +#define CTL_XFER_BLK_COUNT 0xa +#define CTL_RESPONSE 0x0c +#define CTL_STATUS 0x1c +#define CTL_IRQ_MASK 0x20 +#define CTL_SD_CARD_CLK_CTL 0x24 +#define CTL_SD_XFER_LEN 0x26 +#define CTL_SD_MEM_CARD_OPT 0x28 +#define CTL_SD_ERROR_DETAIL_STATUS 0x2c +#define CTL_SD_DATA_PORT 0x30 +#define CTL_TRANSACTION_CTL 0x34 +#define CTL_SDIO_STATUS 0x36 +#define CTL_SDIO_IRQ_MASK 0x38 +#define CTL_RESET_SD 0xe0 +#define CTL_SDIO_REGS 0x100 +#define CTL_CLK_AND_WAIT_CTL 0x138 +#define CTL_RESET_SDIO 0x1e0 + +/* Definitions for values the CTRL_STATUS register can take. */ +#define TMIO_STAT_CMDRESPEND 0x00000001 +#define TMIO_STAT_DATAEND 0x00000004 +#define TMIO_STAT_CARD_REMOVE 0x00000008 +#define TMIO_STAT_CARD_INSERT 0x00000010 +#define TMIO_STAT_SIGSTATE 0x00000020 +#define TMIO_STAT_WRPROTECT 0x00000080 +#define TMIO_STAT_CARD_REMOVE_A 0x00000100 +#define TMIO_STAT_CARD_INSERT_A 0x00000200 +#define TMIO_STAT_SIGSTATE_A 0x00000400 +#define TMIO_STAT_CMD_IDX_ERR 0x00010000 +#define TMIO_STAT_CRCFAIL 0x00020000 +#define TMIO_STAT_STOPBIT_ERR 0x00040000 +#define TMIO_STAT_DATATIMEOUT 0x00080000 +#define TMIO_STAT_RXOVERFLOW 0x00100000 +#define TMIO_STAT_TXUNDERRUN 0x00200000 +#define TMIO_STAT_CMDTIMEOUT 0x00400000 +#define TMIO_STAT_RXRDY 0x01000000 +#define TMIO_STAT_TXRQ 0x02000000 +#define TMIO_STAT_ILL_FUNC 0x20000000 +#define TMIO_STAT_CMD_BUSY 0x40000000 +#define TMIO_STAT_ILL_ACCESS 0x80000000 + +#define TMIO_BBS 512 /* Boot block size */ + +#endif /* _LINUX_MMC_TMIO_H_ */ diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h index 48c007dae476..ae28e93fd072 100644 --- a/include/linux/mod_devicetable.h +++ b/include/linux/mod_devicetable.h @@ -382,6 +382,23 @@ struct ssb_device_id { #define SSB_ANY_ID 0xFFFF #define SSB_ANY_REV 0xFF +/* Broadcom's specific AMBA core, see drivers/bcma/ */ +struct bcma_device_id { + __u16 manuf; + __u16 id; + __u8 rev; + __u8 class; +}; +#define BCMA_CORE(_manuf, _id, _rev, _class) \ + { .manuf = _manuf, .id = _id, .rev = _rev, .class = _class, } +#define BCMA_CORETABLE_END \ + { 0, }, + +#define BCMA_ANY_MANUF 0xFFFF +#define BCMA_ANY_ID 0xFFFF +#define BCMA_ANY_REV 0xFF +#define BCMA_ANY_CLASS 0xFF + struct virtio_device_id { __u32 device; __u32 vendor; diff --git a/include/linux/module.h b/include/linux/module.h index 5de42043dff0..d9ca2d5dc6d0 100644 --- a/include/linux/module.h +++ b/include/linux/module.h @@ -64,6 +64,9 @@ struct module_version_attribute { const char *version; } __attribute__ ((__aligned__(sizeof(void *)))); +extern ssize_t __modver_version_show(struct module_attribute *, + struct module *, char *); + struct module_kobject { struct kobject kobj; @@ -172,12 +175,7 @@ extern struct module __this_module; #define MODULE_VERSION(_version) MODULE_INFO(version, _version) #else #define MODULE_VERSION(_version) \ - extern ssize_t __modver_version_show(struct module_attribute *, \ - struct module *, char *); \ - static struct module_version_attribute __modver_version_attr \ - __used \ - __attribute__ ((__section__ ("__modver"),aligned(sizeof(void *)))) \ - = { \ + static struct module_version_attribute ___modver_attr = { \ .mattr = { \ .attr = { \ .name = "version", \ @@ -187,7 +185,10 @@ extern struct module __this_module; }, \ .module_name = KBUILD_MODNAME, \ .version = _version, \ - } + }; \ + static const struct module_version_attribute \ + __used __attribute__ ((__section__ ("__modver"))) \ + * __moduleparam_const __modver_attr = &___modver_attr #endif /* Optional firmware file (or files) needed by the module @@ -223,7 +224,7 @@ struct module_use { extern void *__crc_##sym __attribute__((weak)); \ static const unsigned long __kcrctab_##sym \ __used \ - __attribute__((section("__kcrctab" sec), unused)) \ + __attribute__((section("___kcrctab" sec "+" #sym), unused)) \ = (unsigned long) &__crc_##sym; #else #define __CRC_SYMBOL(sym, sec) @@ -238,7 +239,7 @@ struct module_use { = MODULE_SYMBOL_PREFIX #sym; \ static const struct kernel_symbol __ksymtab_##sym \ __used \ - __attribute__((section("__ksymtab" sec), unused)) \ + __attribute__((section("___ksymtab" sec "+" #sym), unused)) \ = { (unsigned long)&sym, __kstrtab_##sym } #define EXPORT_SYMBOL(sym) \ @@ -367,34 +368,35 @@ struct module struct module_notes_attrs *notes_attrs; #endif + /* The command line arguments (may be mangled). People like + keeping pointers to this stuff */ + char *args; + #ifdef CONFIG_SMP /* Per-cpu data. */ void __percpu *percpu; unsigned int percpu_size; #endif - /* The command line arguments (may be mangled). People like - keeping pointers to this stuff */ - char *args; #ifdef CONFIG_TRACEPOINTS - struct tracepoint * const *tracepoints_ptrs; unsigned int num_tracepoints; + struct tracepoint * const *tracepoints_ptrs; #endif #ifdef HAVE_JUMP_LABEL struct jump_entry *jump_entries; unsigned int num_jump_entries; #endif #ifdef CONFIG_TRACING - const char **trace_bprintk_fmt_start; unsigned int num_trace_bprintk_fmt; + const char **trace_bprintk_fmt_start; #endif #ifdef CONFIG_EVENT_TRACING struct ftrace_event_call **trace_events; unsigned int num_trace_events; #endif #ifdef CONFIG_FTRACE_MCOUNT_RECORD - unsigned long *ftrace_callsites; unsigned int num_ftrace_callsites; + unsigned long *ftrace_callsites; #endif #ifdef CONFIG_MODULE_UNLOAD @@ -475,8 +477,9 @@ const struct kernel_symbol *find_symbol(const char *name, bool warn); /* Walk the exported symbol table */ -bool each_symbol(bool (*fn)(const struct symsearch *arr, struct module *owner, - unsigned int symnum, void *data), void *data); +bool each_symbol_section(bool (*fn)(const struct symsearch *arr, + struct module *owner, + void *data), void *data); /* Returns 0 and fills in value, defined and namebuf, or -ERANGE if symnum out of range. */ diff --git a/include/linux/moduleparam.h b/include/linux/moduleparam.h index 07b41951e3fa..ddaae98c53f9 100644 --- a/include/linux/moduleparam.h +++ b/include/linux/moduleparam.h @@ -67,9 +67,9 @@ struct kparam_string { struct kparam_array { unsigned int max; + unsigned int elemsize; unsigned int *num; const struct kernel_param_ops *ops; - unsigned int elemsize; void *elem; }; @@ -371,8 +371,9 @@ extern int param_get_invbool(char *buffer, const struct kernel_param *kp); */ #define module_param_array_named(name, array, type, nump, perm) \ static const struct kparam_array __param_arr_##name \ - = { ARRAY_SIZE(array), nump, ¶m_ops_##type, \ - sizeof(array[0]), array }; \ + = { .max = ARRAY_SIZE(array), .num = nump, \ + .ops = ¶m_ops_##type, \ + .elemsize = sizeof(array[0]), .elem = array }; \ __module_param_call(MODULE_PARAM_PREFIX, name, \ ¶m_array_ops, \ .arr = &__param_arr_##name, \ diff --git a/include/linux/mroute.h b/include/linux/mroute.h index b21d567692b2..46caaf44339d 100644 --- a/include/linux/mroute.h +++ b/include/linux/mroute.h @@ -244,6 +244,7 @@ struct mfc_cache { #ifdef __KERNEL__ struct rtmsg; extern int ipmr_get_route(struct net *net, struct sk_buff *skb, + __be32 saddr, __be32 daddr, struct rtmsg *rtm, int nowait); #endif diff --git a/include/linux/mroute6.h b/include/linux/mroute6.h index 9d2deb200f54..a3759cb0ac10 100644 --- a/include/linux/mroute6.h +++ b/include/linux/mroute6.h @@ -249,7 +249,7 @@ static inline int ip6mr_sk_done(struct sock *sk) * Structure used to communicate from kernel to multicast router. * We'll overlay the structure onto an MLD header (not an IPv6 heder like igmpmsg{} * used for IPv4 implementation). This is because this structure will be passed via an - * IPv6 raw socket, on wich an application will only receiver the payload i.e the data after + * IPv6 raw socket, on which an application will only receiver the payload i.e the data after * the IPv6 header and all the extension headers. (See section 3 of RFC 3542) */ diff --git a/include/linux/mtd/blktrans.h b/include/linux/mtd/blktrans.h index 26529ebd59cc..1bbd9f289245 100644 --- a/include/linux/mtd/blktrans.h +++ b/include/linux/mtd/blktrans.h @@ -36,6 +36,7 @@ struct mtd_blktrans_dev { struct mtd_info *mtd; struct mutex lock; int devnum; + bool bg_stop; unsigned long size; int readonly; int open; @@ -62,6 +63,7 @@ struct mtd_blktrans_ops { unsigned long block, char *buffer); int (*discard)(struct mtd_blktrans_dev *dev, unsigned long block, unsigned nr_blocks); + void (*background)(struct mtd_blktrans_dev *dev); /* Block layer ioctls */ int (*getgeo)(struct mtd_blktrans_dev *dev, struct hd_geometry *geo); @@ -85,6 +87,7 @@ extern int register_mtd_blktrans(struct mtd_blktrans_ops *tr); extern int deregister_mtd_blktrans(struct mtd_blktrans_ops *tr); extern int add_mtd_blktrans_dev(struct mtd_blktrans_dev *dev); extern int del_mtd_blktrans_dev(struct mtd_blktrans_dev *dev); +extern int mtd_blktrans_cease_background(struct mtd_blktrans_dev *dev); #endif /* __MTD_TRANS_H__ */ diff --git a/include/linux/mtd/cfi.h b/include/linux/mtd/cfi.h index a9baee6864af..d24925492972 100644 --- a/include/linux/mtd/cfi.h +++ b/include/linux/mtd/cfi.h @@ -308,7 +308,7 @@ static inline uint32_t cfi_build_cmd_addr(uint32_t cmd_ofs, addr = (cmd_ofs * type) * interleave; - /* Modify the unlock address if we are in compatiblity mode. + /* Modify the unlock address if we are in compatibility mode. * For 16bit devices on 8 bit busses * and 32bit devices on 16 bit busses * set the low bit of the alternating bit sequence of the address. @@ -535,6 +535,7 @@ struct cfi_fixup { #define CFI_MFR_CONTINUATION 0x007F #define CFI_MFR_AMD 0x0001 +#define CFI_MFR_AMIC 0x0037 #define CFI_MFR_ATMEL 0x001F #define CFI_MFR_EON 0x001C #define CFI_MFR_FUJITSU 0x0004 diff --git a/include/linux/mtd/latch-addr-flash.h b/include/linux/mtd/latch-addr-flash.h new file mode 100644 index 000000000000..e94b8e128074 --- /dev/null +++ b/include/linux/mtd/latch-addr-flash.h @@ -0,0 +1,29 @@ +/* + * Interface for NOR flash driver whose high address lines are latched + * + * Copyright © 2008 MontaVista Software, Inc. <source@mvista.com> + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ +#ifndef __LATCH_ADDR_FLASH__ +#define __LATCH_ADDR_FLASH__ + +struct map_info; +struct mtd_partition; + +struct latch_addr_flash_data { + unsigned int width; + unsigned int size; + + int (*init)(void *data, int cs); + void (*done)(void *data); + void (*set_window)(unsigned long offset, void *data); + void *data; + + unsigned int nr_parts; + struct mtd_partition *parts; +}; + +#endif diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index 1f489b247a29..d44192740f6f 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -140,6 +140,7 @@ typedef enum { NAND_ECC_HW, NAND_ECC_HW_SYNDROME, NAND_ECC_HW_OOB_FIRST, + NAND_ECC_SOFT_BCH, } nand_ecc_modes_t; /* @@ -339,6 +340,7 @@ struct nand_hw_control { * @prepad: padding information for syndrome based ecc generators * @postpad: padding information for syndrome based ecc generators * @layout: ECC layout control struct pointer + * @priv: pointer to private ecc control data * @hwctl: function to control hardware ecc generator. Must only * be provided if an hardware ECC is available * @calculate: function for ecc calculation or readback from ecc hardware @@ -362,6 +364,7 @@ struct nand_ecc_ctrl { int prepad; int postpad; struct nand_ecclayout *layout; + void *priv; void (*hwctl)(struct mtd_info *mtd, int mode); int (*calculate)(struct mtd_info *mtd, const uint8_t *dat, uint8_t *ecc_code); @@ -413,9 +416,9 @@ struct nand_buffers { * @select_chip: [REPLACEABLE] select chip nr * @block_bad: [REPLACEABLE] check, if the block is bad * @block_markbad: [REPLACEABLE] mark the block bad - * @cmd_ctrl: [BOARDSPECIFIC] hardwarespecific funtion for controlling + * @cmd_ctrl: [BOARDSPECIFIC] hardwarespecific function for controlling * ALE/CLE/nCE. Also used to write command and address - * @init_size: [BOARDSPECIFIC] hardwarespecific funtion for setting + * @init_size: [BOARDSPECIFIC] hardwarespecific function for setting * mtd->oobsize, mtd->writesize and so on. * @id_data contains the 8 bytes values of NAND_CMD_READID. * Return with the bus width. @@ -434,7 +437,7 @@ struct nand_buffers { * @erase_cmd: [INTERN] erase command write function, selectable due * to AND support. * @scan_bbt: [REPLACEABLE] function to scan bad block table - * @chip_delay: [BOARDSPECIFIC] chip dependent delay for transfering + * @chip_delay: [BOARDSPECIFIC] chip dependent delay for transferring * data from array to read regs (tR). * @state: [INTERN] the current state of the NAND device * @oob_poi: poison value buffer diff --git a/include/linux/mtd/nand_bch.h b/include/linux/mtd/nand_bch.h new file mode 100644 index 000000000000..74acf5367556 --- /dev/null +++ b/include/linux/mtd/nand_bch.h @@ -0,0 +1,72 @@ +/* + * Copyright © 2011 Ivan Djelic <ivan.djelic@parrot.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This file is the header for the NAND BCH ECC implementation. + */ + +#ifndef __MTD_NAND_BCH_H__ +#define __MTD_NAND_BCH_H__ + +struct mtd_info; +struct nand_bch_control; + +#if defined(CONFIG_MTD_NAND_ECC_BCH) + +static inline int mtd_nand_has_bch(void) { return 1; } + +/* + * Calculate BCH ecc code + */ +int nand_bch_calculate_ecc(struct mtd_info *mtd, const u_char *dat, + u_char *ecc_code); + +/* + * Detect and correct bit errors + */ +int nand_bch_correct_data(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, + u_char *calc_ecc); +/* + * Initialize BCH encoder/decoder + */ +struct nand_bch_control * +nand_bch_init(struct mtd_info *mtd, unsigned int eccsize, + unsigned int eccbytes, struct nand_ecclayout **ecclayout); +/* + * Release BCH encoder/decoder resources + */ +void nand_bch_free(struct nand_bch_control *nbc); + +#else /* !CONFIG_MTD_NAND_ECC_BCH */ + +static inline int mtd_nand_has_bch(void) { return 0; } + +static inline int +nand_bch_calculate_ecc(struct mtd_info *mtd, const u_char *dat, + u_char *ecc_code) +{ + return -1; +} + +static inline int +nand_bch_correct_data(struct mtd_info *mtd, unsigned char *buf, + unsigned char *read_ecc, unsigned char *calc_ecc) +{ + return -1; +} + +static inline struct nand_bch_control * +nand_bch_init(struct mtd_info *mtd, unsigned int eccsize, + unsigned int eccbytes, struct nand_ecclayout **ecclayout) +{ + return NULL; +} + +static inline void nand_bch_free(struct nand_bch_control *nbc) {} + +#endif /* CONFIG_MTD_NAND_ECC_BCH */ + +#endif /* __MTD_NAND_BCH_H__ */ diff --git a/include/linux/mtd/onenand.h b/include/linux/mtd/onenand.h index ae418e41d8f5..52b6f187bf49 100644 --- a/include/linux/mtd/onenand.h +++ b/include/linux/mtd/onenand.h @@ -198,6 +198,7 @@ struct onenand_chip { #define ONENAND_SKIP_UNLOCK_CHECK (0x0100) #define ONENAND_PAGEBUF_ALLOC (0x1000) #define ONENAND_OOBBUF_ALLOC (0x2000) +#define ONENAND_SKIP_INITIAL_UNLOCKING (0x4000) #define ONENAND_IS_4KB_PAGE(this) \ (this->options & ONENAND_HAS_4KB_PAGE) diff --git a/include/linux/mtd/xip.h b/include/linux/mtd/xip.h index 36efcba15ecd..abed4dec5c2f 100644 --- a/include/linux/mtd/xip.h +++ b/include/linux/mtd/xip.h @@ -51,7 +51,7 @@ * return in usecs the elapsed timebetween now and the reference x as * returned by xip_currtime(). * - * note 1: convertion to usec can be approximated, as long as the + * note 1: conversion to usec can be approximated, as long as the * returned value is <= the real elapsed time. * note 2: this should be able to cope with a few seconds without * overflowing. diff --git a/include/linux/mutex.h b/include/linux/mutex.h index 94b48bd40dd7..c75471db576e 100644 --- a/include/linux/mutex.h +++ b/include/linux/mutex.h @@ -51,7 +51,7 @@ struct mutex { spinlock_t wait_lock; struct list_head wait_list; #if defined(CONFIG_DEBUG_MUTEXES) || defined(CONFIG_SMP) - struct thread_info *owner; + struct task_struct *owner; #endif #ifdef CONFIG_DEBUG_MUTEXES const char *name; diff --git a/include/linux/net.h b/include/linux/net.h index 94de83c0f877..1da55e9b6f01 100644 --- a/include/linux/net.h +++ b/include/linux/net.h @@ -42,6 +42,7 @@ #define SYS_RECVMSG 17 /* sys_recvmsg(2) */ #define SYS_ACCEPT4 18 /* sys_accept4(2) */ #define SYS_RECVMMSG 19 /* sys_recvmmsg(2) */ +#define SYS_SENDMMSG 20 /* sys_sendmmsg(2) */ typedef enum { SS_FREE = 0, /* not allocated */ diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 5eeb2cd3631c..ca333e79e10f 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -1020,9 +1020,6 @@ struct net_device { * part of the usual set specified in Space.c. */ - unsigned char if_port; /* Selectable AUI, TP,..*/ - unsigned char dma; /* DMA channel */ - unsigned long state; struct list_head dev_list; @@ -1035,7 +1032,7 @@ struct net_device { u32 hw_features; /* user-requested features */ u32 wanted_features; - /* VLAN feature mask */ + /* mask of features inheritable by VLAN devices */ u32 vlan_features; /* Net device feature bits; if you change something, @@ -1066,6 +1063,8 @@ struct net_device { #define NETIF_F_NTUPLE (1 << 27) /* N-tuple filters supported */ #define NETIF_F_RXHASH (1 << 28) /* Receive hashing offload */ #define NETIF_F_RXCSUM (1 << 29) /* Receive checksumming offload */ +#define NETIF_F_NOCACHE_COPY (1 << 30) /* Use no-cache copyfromuser */ +#define NETIF_F_LOOPBACK (1 << 31) /* Enable loopback */ /* Segmentation offload features */ #define NETIF_F_GSO_SHIFT 16 @@ -1079,9 +1078,9 @@ struct net_device { /* Features valid for ethtool to change */ /* = all defined minus driver/device-class-related */ -#define NETIF_F_NEVER_CHANGE (NETIF_F_HIGHDMA | NETIF_F_VLAN_CHALLENGED | \ +#define NETIF_F_NEVER_CHANGE (NETIF_F_VLAN_CHALLENGED | \ NETIF_F_LLTX | NETIF_F_NETNS_LOCAL) -#define NETIF_F_ETHTOOL_BITS (0x3f3fffff & ~NETIF_F_NEVER_CHANGE) +#define NETIF_F_ETHTOOL_BITS (0xff3fffff & ~NETIF_F_NEVER_CHANGE) /* List of features with software fallbacks. */ #define NETIF_F_GSO_SOFTWARE (NETIF_F_TSO | NETIF_F_TSO_ECN | \ @@ -1095,9 +1094,14 @@ struct net_device { #define NETIF_F_ALL_TSO (NETIF_F_TSO | NETIF_F_TSO6 | NETIF_F_TSO_ECN) +#define NETIF_F_ALL_FCOE (NETIF_F_FCOE_CRC | NETIF_F_FCOE_MTU | \ + NETIF_F_FSO) + #define NETIF_F_ALL_TX_OFFLOADS (NETIF_F_ALL_CSUM | NETIF_F_SG | \ NETIF_F_FRAGLIST | NETIF_F_ALL_TSO | \ - NETIF_F_SCTP_CSUM | NETIF_F_FCOE_CRC) + NETIF_F_HIGHDMA | \ + NETIF_F_SCTP_CSUM | \ + NETIF_F_ALL_FCOE) /* * If one device supports one of these features, then enable them @@ -1105,7 +1109,12 @@ struct net_device { */ #define NETIF_F_ONE_FOR_ALL (NETIF_F_GSO_SOFTWARE | NETIF_F_GSO_ROBUST | \ NETIF_F_SG | NETIF_F_HIGHDMA | \ - NETIF_F_FRAGLIST) + NETIF_F_FRAGLIST | NETIF_F_VLAN_CHALLENGED) + /* + * If one device doesn't support one of these features, then disable it + * for all in netdev_increment_features. + */ +#define NETIF_F_ALL_FOR_ALL (NETIF_F_NOCACHE_COPY | NETIF_F_FSO) /* changeable features with no special hardware requirements */ #define NETIF_F_SOFT_FEATURES (NETIF_F_GSO | NETIF_F_GRO) @@ -1134,13 +1143,16 @@ struct net_device { const struct header_ops *header_ops; unsigned int flags; /* interface flags (a la BSD) */ + unsigned int priv_flags; /* Like 'flags' but invisible to userspace. */ unsigned short gflags; - unsigned int priv_flags; /* Like 'flags' but invisible to userspace. */ unsigned short padded; /* How much padding added by alloc_netdev() */ unsigned char operstate; /* RFC2863 operstate */ unsigned char link_mode; /* mapping policy to operstate */ + unsigned char if_port; /* Selectable AUI, TP,..*/ + unsigned char dma; /* DMA channel */ + unsigned int mtu; /* interface MTU value */ unsigned short type; /* interface hardware type */ unsigned short hard_header_len; /* hardware hdr length */ @@ -1281,7 +1293,9 @@ struct net_device { NETREG_UNREGISTERED, /* completed unregister todo */ NETREG_RELEASED, /* called free_netdev */ NETREG_DUMMY, /* dummy device for NAPI poll */ - } reg_state:16; + } reg_state:8; + + bool dismantle; /* device is going do be freed */ enum { RTNL_LINK_INITIALIZED, @@ -2513,6 +2527,7 @@ extern struct rtnl_link_stats64 *dev_get_stats(struct net_device *dev, extern int netdev_max_backlog; extern int netdev_tstamp_prequeue; extern int weight_p; +extern int bpf_jit_enable; extern int netdev_set_master(struct net_device *dev, struct net_device *master); extern int netdev_set_bond_master(struct net_device *dev, struct net_device *master); @@ -2550,7 +2565,9 @@ static inline u32 netdev_get_wanted_features(struct net_device *dev) } u32 netdev_increment_features(u32 all, u32 one, u32 mask); u32 netdev_fix_features(struct net_device *dev, u32 features); +int __netdev_update_features(struct net_device *dev); void netdev_update_features(struct net_device *dev); +void netdev_change_features(struct net_device *dev); void netif_stacked_transfer_operstate(const struct net_device *rootdev, struct net_device *dev); @@ -2588,18 +2605,13 @@ static inline int netif_is_bond_slave(struct net_device *dev) extern struct pernet_operations __net_initdata loopback_net_ops; -static inline int dev_ethtool_get_settings(struct net_device *dev, - struct ethtool_cmd *cmd) -{ - if (!dev->ethtool_ops || !dev->ethtool_ops->get_settings) - return -EOPNOTSUPP; - return dev->ethtool_ops->get_settings(dev, cmd); -} +int dev_ethtool_get_settings(struct net_device *dev, + struct ethtool_cmd *cmd); static inline u32 dev_ethtool_get_rx_csum(struct net_device *dev) { - if (dev->hw_features & NETIF_F_RXCSUM) - return !!(dev->features & NETIF_F_RXCSUM); + if (dev->features & NETIF_F_RXCSUM) + return 1; if (!dev->ethtool_ops || !dev->ethtool_ops->get_rx_csum) return 0; return dev->ethtool_ops->get_rx_csum(dev); diff --git a/include/linux/netfilter.h b/include/linux/netfilter.h index eeec00abb664..7fa95df60146 100644 --- a/include/linux/netfilter.h +++ b/include/linux/netfilter.h @@ -270,7 +270,8 @@ struct nf_afinfo { unsigned int dataoff, unsigned int len, u_int8_t protocol); - int (*route)(struct dst_entry **dst, struct flowi *fl); + int (*route)(struct net *net, struct dst_entry **dst, + struct flowi *fl, bool strict); void (*saveroute)(const struct sk_buff *skb, struct nf_queue_entry *entry); int (*reroute)(struct sk_buff *skb, diff --git a/include/linux/netfilter/ipset/ip_set.h b/include/linux/netfilter/ipset/ip_set.h index ec333d83f3b4..5a262e3ae715 100644 --- a/include/linux/netfilter/ipset/ip_set.h +++ b/include/linux/netfilter/ipset/ip_set.h @@ -293,7 +293,7 @@ struct ip_set { /* Lock protecting the set data */ rwlock_t lock; /* References to the set */ - atomic_t ref; + u32 ref; /* The core set type */ struct ip_set_type *type; /* The type variant doing the real job */ diff --git a/include/linux/netfilter/ipset/ip_set_ahash.h b/include/linux/netfilter/ipset/ip_set_ahash.h index ec9d9bea1e37..a0196ac79051 100644 --- a/include/linux/netfilter/ipset/ip_set_ahash.h +++ b/include/linux/netfilter/ipset/ip_set_ahash.h @@ -515,8 +515,7 @@ type_pf_head(struct ip_set *set, struct sk_buff *skb) if (h->netmask != HOST_MASK) NLA_PUT_U8(skb, IPSET_ATTR_NETMASK, h->netmask); #endif - NLA_PUT_NET32(skb, IPSET_ATTR_REFERENCES, - htonl(atomic_read(&set->ref) - 1)); + NLA_PUT_NET32(skb, IPSET_ATTR_REFERENCES, htonl(set->ref - 1)); NLA_PUT_NET32(skb, IPSET_ATTR_MEMSIZE, htonl(memsize)); if (with_timeout(h->timeout)) NLA_PUT_NET32(skb, IPSET_ATTR_TIMEOUT, htonl(h->timeout)); diff --git a/include/linux/netfilter/ipset/ip_set_getport.h b/include/linux/netfilter/ipset/ip_set_getport.h index 5aebd170f899..90d09300e954 100644 --- a/include/linux/netfilter/ipset/ip_set_getport.h +++ b/include/linux/netfilter/ipset/ip_set_getport.h @@ -22,7 +22,9 @@ static inline bool ip_set_proto_with_ports(u8 proto) { switch (proto) { case IPPROTO_TCP: + case IPPROTO_SCTP: case IPPROTO_UDP: + case IPPROTO_UDPLITE: return true; } return false; diff --git a/include/linux/netfilter/nf_conntrack_proto_gre.h b/include/linux/netfilter/nf_conntrack_proto_gre.h index 2a10efda17fb..6a0664c0c451 100644 --- a/include/linux/netfilter/nf_conntrack_proto_gre.h +++ b/include/linux/netfilter/nf_conntrack_proto_gre.h @@ -60,7 +60,7 @@ struct gre_hdr_pptp { __be16 payload_len; /* size of ppp payload, not inc. gre header */ __be16 call_id; /* peer's call_id for this session */ __be32 seq; /* sequence number. Present if S==1 */ - __be32 ack; /* seq number of highest packet recieved by */ + __be32 ack; /* seq number of highest packet received by */ /* sender in this session */ }; diff --git a/include/linux/netfilter/x_tables.h b/include/linux/netfilter/x_tables.h index 37219525ff6f..32cddf78b13e 100644 --- a/include/linux/netfilter/x_tables.h +++ b/include/linux/netfilter/x_tables.h @@ -456,72 +456,60 @@ extern void xt_proto_fini(struct net *net, u_int8_t af); extern struct xt_table_info *xt_alloc_table_info(unsigned int size); extern void xt_free_table_info(struct xt_table_info *info); -/* - * Per-CPU spinlock associated with per-cpu table entries, and - * with a counter for the "reading" side that allows a recursive - * reader to avoid taking the lock and deadlocking. - * - * "reading" is used by ip/arp/ip6 tables rule processing which runs per-cpu. - * It needs to ensure that the rules are not being changed while the packet - * is being processed. In some cases, the read lock will be acquired - * twice on the same CPU; this is okay because of the count. - * - * "writing" is used when reading counters. - * During replace any readers that are using the old tables have to complete - * before freeing the old table. This is handled by the write locking - * necessary for reading the counters. +/** + * xt_recseq - recursive seqcount for netfilter use + * + * Packet processing changes the seqcount only if no recursion happened + * get_counters() can use read_seqcount_begin()/read_seqcount_retry(), + * because we use the normal seqcount convention : + * Low order bit set to 1 if a writer is active. */ -struct xt_info_lock { - seqlock_t lock; - unsigned char readers; -}; -DECLARE_PER_CPU(struct xt_info_lock, xt_info_locks); +DECLARE_PER_CPU(seqcount_t, xt_recseq); -/* - * Note: we need to ensure that preemption is disabled before acquiring - * the per-cpu-variable, so we do it as a two step process rather than - * using "spin_lock_bh()". - * - * We _also_ need to disable bottom half processing before updating our - * nesting count, to make sure that the only kind of re-entrancy is this - * code being called by itself: since the count+lock is not an atomic - * operation, we can allow no races. +/** + * xt_write_recseq_begin - start of a write section * - * _Only_ that special combination of being per-cpu and never getting - * re-entered asynchronously means that the count is safe. + * Begin packet processing : all readers must wait the end + * 1) Must be called with preemption disabled + * 2) softirqs must be disabled too (or we should use irqsafe_cpu_add()) + * Returns : + * 1 if no recursion on this cpu + * 0 if recursion detected */ -static inline void xt_info_rdlock_bh(void) +static inline unsigned int xt_write_recseq_begin(void) { - struct xt_info_lock *lock; + unsigned int addend; - local_bh_disable(); - lock = &__get_cpu_var(xt_info_locks); - if (likely(!lock->readers++)) - write_seqlock(&lock->lock); -} + /* + * Low order bit of sequence is set if we already + * called xt_write_recseq_begin(). + */ + addend = (__this_cpu_read(xt_recseq.sequence) + 1) & 1; -static inline void xt_info_rdunlock_bh(void) -{ - struct xt_info_lock *lock = &__get_cpu_var(xt_info_locks); + /* + * This is kind of a write_seqcount_begin(), but addend is 0 or 1 + * We dont check addend value to avoid a test and conditional jump, + * since addend is most likely 1 + */ + __this_cpu_add(xt_recseq.sequence, addend); + smp_wmb(); - if (likely(!--lock->readers)) - write_sequnlock(&lock->lock); - local_bh_enable(); + return addend; } -/* - * The "writer" side needs to get exclusive access to the lock, - * regardless of readers. This must be called with bottom half - * processing (and thus also preemption) disabled. +/** + * xt_write_recseq_end - end of a write section + * @addend: return value from previous xt_write_recseq_begin() + * + * End packet processing : all readers can proceed + * 1) Must be called with preemption disabled + * 2) softirqs must be disabled too (or we should use irqsafe_cpu_add()) */ -static inline void xt_info_wrlock(unsigned int cpu) -{ - write_seqlock(&per_cpu(xt_info_locks, cpu).lock); -} - -static inline void xt_info_wrunlock(unsigned int cpu) +static inline void xt_write_recseq_end(unsigned int addend) { - write_sequnlock(&per_cpu(xt_info_locks, cpu).lock); + /* this is kind of a write_seqcount_end(), but addend is 0 or 1 */ + smp_wmb(); + __this_cpu_add(xt_recseq.sequence, addend); } /* diff --git a/include/linux/netfilter_bridge/ebtables.h b/include/linux/netfilter_bridge/ebtables.h index 1c6f0c5f530e..8797ed16feb2 100644 --- a/include/linux/netfilter_bridge/ebtables.h +++ b/include/linux/netfilter_bridge/ebtables.h @@ -92,7 +92,7 @@ struct ebt_entries { /* This is a hack to make a difference between an ebt_entry struct and an * ebt_entries struct when traversing the entries from start to end. - * Using this simplifies the code alot, while still being able to use + * Using this simplifies the code a lot, while still being able to use * ebt_entries. * Contrary, iptables doesn't use something like ebt_entries and therefore uses * different techniques for naming the policy and such. So, iptables doesn't diff --git a/include/linux/nfs4.h b/include/linux/nfs4.h index b528f6d4b860..178fafe0ff93 100644 --- a/include/linux/nfs4.h +++ b/include/linux/nfs4.h @@ -359,7 +359,7 @@ enum nfsstat4 { /* Error 10073 is unused. */ NFS4ERR_CLIENTID_BUSY = 10074, /* clientid has state */ NFS4ERR_PNFS_IO_HOLE = 10075, /* IO to _SPARSE file hole */ - NFS4ERR_SEQ_FALSE_RETRY = 10076, /* retry not origional */ + NFS4ERR_SEQ_FALSE_RETRY = 10076, /* retry not original */ NFS4ERR_BAD_HIGH_SLOT = 10077, /* sequence arg bad */ NFS4ERR_DEADSESSION = 10078, /* persistent session dead */ NFS4ERR_ENCR_ALG_UNSUPP = 10079, /* SSV alg mismatch */ diff --git a/include/linux/nfs_fs_sb.h b/include/linux/nfs_fs_sb.h index 216cea5db0aa..87694ca86914 100644 --- a/include/linux/nfs_fs_sb.h +++ b/include/linux/nfs_fs_sb.h @@ -47,6 +47,7 @@ struct nfs_client { #ifdef CONFIG_NFS_V4 u64 cl_clientid; /* constant */ + nfs4_verifier cl_confirm; /* Clientid verifier */ unsigned long cl_state; spinlock_t cl_lock; diff --git a/include/linux/nfs_page.h b/include/linux/nfs_page.h index 8023e4e25133..91af2e49fa3a 100644 --- a/include/linux/nfs_page.h +++ b/include/linux/nfs_page.h @@ -78,7 +78,6 @@ extern struct nfs_page *nfs_create_request(struct nfs_open_context *ctx, struct page *page, unsigned int offset, unsigned int count); -extern void nfs_clear_request(struct nfs_page *req); extern void nfs_release_request(struct nfs_page *req); diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h index 78b101e487ea..7e371f7df9c4 100644 --- a/include/linux/nfs_xdr.h +++ b/include/linux/nfs_xdr.h @@ -50,6 +50,7 @@ struct nfs_fattr { } du; struct nfs_fsid fsid; __u64 fileid; + __u64 mounted_on_fileid; struct timespec atime; struct timespec mtime; struct timespec ctime; @@ -83,6 +84,7 @@ struct nfs_fattr { #define NFS_ATTR_FATTR_PRECHANGE (1U << 18) #define NFS_ATTR_FATTR_V4_REFERRAL (1U << 19) /* NFSv4 referral */ #define NFS_ATTR_FATTR_MOUNTPOINT (1U << 20) /* Treat as mountpoint */ +#define NFS_ATTR_FATTR_MOUNTED_ON_FILEID (1U << 21) #define NFS_ATTR_FATTR (NFS_ATTR_FATTR_TYPE \ | NFS_ATTR_FATTR_MODE \ @@ -231,6 +233,7 @@ struct nfs4_layoutget { struct nfs4_layoutget_args args; struct nfs4_layoutget_res res; struct pnfs_layout_segment **lsegpp; + gfp_t gfp_flags; }; struct nfs4_getdeviceinfo_args { diff --git a/include/linux/nfsd/export.h b/include/linux/nfsd/export.h index bd316159278c..84058ec69390 100644 --- a/include/linux/nfsd/export.h +++ b/include/linux/nfsd/export.h @@ -80,7 +80,7 @@ struct nfsd4_fs_locations { /* * We keep an array of pseudoflavors with the export, in order from most - * to least preferred. For the forseeable future, we don't expect more + * to least preferred. For the foreseeable future, we don't expect more * than the eight pseudoflavors null, unix, krb5, krb5i, krb5p, skpm3, * spkm3i, and spkm3p (and using all 8 at once should be rare). */ diff --git a/include/linux/nfsd/nfsfh.h b/include/linux/nfsd/nfsfh.h index 80d55bbc5365..f76d80ccec10 100644 --- a/include/linux/nfsd/nfsfh.h +++ b/include/linux/nfsd/nfsfh.h @@ -49,7 +49,7 @@ struct nfs_fhbase_old { * * The auth_type field specifies how the filehandle can be authenticated * This might allow a file to be confirmed to be in a writable part of a - * filetree without checking the path from it upto the root. + * filetree without checking the path from it up to the root. * Current values: * 0 - No authentication. fb_auth is 0 bytes long * Possible future values: diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index 30022189104d..c7ccaae15af6 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -77,6 +77,39 @@ */ /** + * DOC: Virtual interface / concurrency capabilities + * + * Some devices are able to operate with virtual MACs, they can have + * more than one virtual interface. The capability handling for this + * is a bit complex though, as there may be a number of restrictions + * on the types of concurrency that are supported. + * + * To start with, each device supports the interface types listed in + * the %NL80211_ATTR_SUPPORTED_IFTYPES attribute, but by listing the + * types there no concurrency is implied. + * + * Once concurrency is desired, more attributes must be observed: + * To start with, since some interface types are purely managed in + * software, like the AP-VLAN type in mac80211 for example, there's + * an additional list of these, they can be added at any time and + * are only restricted by some semantic restrictions (e.g. AP-VLAN + * cannot be added without a corresponding AP interface). This list + * is exported in the %NL80211_ATTR_SOFTWARE_IFTYPES attribute. + * + * Further, the list of supported combinations is exported. This is + * in the %NL80211_ATTR_INTERFACE_COMBINATIONS attribute. Basically, + * it exports a list of "groups", and at any point in time the + * interfaces that are currently active must fall into any one of + * the advertised groups. Within each group, there are restrictions + * on the number of interfaces of different types that are supported + * and also the number of different channels, along with potentially + * some other restrictions. See &enum nl80211_if_combination_attrs. + * + * All together, these attributes define the concurrency of virtual + * interfaces that a given device supports. + */ + +/** * enum nl80211_commands - supported nl80211 commands * * @NL80211_CMD_UNSPEC: unspecified command to catch errors @@ -203,6 +236,28 @@ * @NL80211_CMD_SCAN_ABORTED: scan was aborted, for unspecified reasons, * partial scan results may be available * + * @NL80211_CMD_START_SCHED_SCAN: start a scheduled scan at certain + * intervals, as specified by %NL80211_ATTR_SCHED_SCAN_INTERVAL. + * Like with normal scans, if SSIDs (%NL80211_ATTR_SCAN_SSIDS) + * are passed, they are used in the probe requests. For + * broadcast, a broadcast SSID must be passed (ie. an empty + * string). If no SSID is passed, no probe requests are sent and + * a passive scan is performed. %NL80211_ATTR_SCAN_FREQUENCIES, + * if passed, define which channels should be scanned; if not + * passed, all channels allowed for the current regulatory domain + * are used. Extra IEs can also be passed from the userspace by + * using the %NL80211_ATTR_IE attribute. + * @NL80211_CMD_STOP_SCHED_SCAN: stop a scheduled scan + * @NL80211_CMD_SCHED_SCAN_RESULTS: indicates that there are scheduled scan + * results available. + * @NL80211_CMD_SCHED_SCAN_STOPPED: indicates that the scheduled scan has + * stopped. The driver may issue this event at any time during a + * scheduled scan. One reason for stopping the scan is if the hardware + * does not support starting an association or a normal scan while running + * a scheduled scan. This event is also sent when the + * %NL80211_CMD_STOP_SCHED_SCAN command is received or when the interface + * is brought down while a scheduled scan was running. + * * @NL80211_CMD_GET_SURVEY: get survey resuls, e.g. channel occupation * or noise level * @NL80211_CMD_NEW_SURVEY_RESULTS: survey data notification (as a reply to @@ -410,11 +465,29 @@ * notification. This event is used to indicate that an unprotected * disassociation frame was dropped when MFP is in use. * + * @NL80211_CMD_NEW_PEER_CANDIDATE: Notification on the reception of a + * beacon or probe response from a compatible mesh peer. This is only + * sent while no station information (sta_info) exists for the new peer + * candidate and when @NL80211_MESH_SETUP_USERSPACE_AUTH is set. On + * reception of this notification, userspace may decide to create a new + * station (@NL80211_CMD_NEW_STATION). To stop this notification from + * reoccurring, the userspace authentication daemon may want to create the + * new station with the AUTHENTICATED flag unset and maybe change it later + * depending on the authentication result. + * + * @NL80211_CMD_GET_WOWLAN: get Wake-on-Wireless-LAN (WoWLAN) settings. + * @NL80211_CMD_SET_WOWLAN: set Wake-on-Wireless-LAN (WoWLAN) settings. + * Since wireless is more complex than wired ethernet, it supports + * various triggers. These triggers can be configured through this + * command with the %NL80211_ATTR_WOWLAN_TRIGGERS attribute. For + * more background information, see + * http://wireless.kernel.org/en/users/Documentation/WoWLAN. + * * @NL80211_CMD_MAX: highest used command number * @__NL80211_CMD_AFTER_LAST: internal use */ enum nl80211_commands { -/* don't change the order or add anything inbetween, this is ABI! */ +/* don't change the order or add anything between, this is ABI! */ NL80211_CMD_UNSPEC, NL80211_CMD_GET_WIPHY, /* can dump */ @@ -522,6 +595,16 @@ enum nl80211_commands { NL80211_CMD_UNPROT_DEAUTHENTICATE, NL80211_CMD_UNPROT_DISASSOCIATE, + NL80211_CMD_NEW_PEER_CANDIDATE, + + NL80211_CMD_GET_WOWLAN, + NL80211_CMD_SET_WOWLAN, + + NL80211_CMD_START_SCHED_SCAN, + NL80211_CMD_STOP_SCHED_SCAN, + NL80211_CMD_SCHED_SCAN_RESULTS, + NL80211_CMD_SCHED_SCAN_STOPPED, + /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ @@ -545,6 +628,7 @@ enum nl80211_commands { /* source-level API compatibility */ #define NL80211_CMD_GET_MESH_PARAMS NL80211_CMD_GET_MESH_CONFIG #define NL80211_CMD_SET_MESH_PARAMS NL80211_CMD_SET_MESH_CONFIG +#define NL80211_MESH_SETUP_VENDOR_PATH_SEL_IE NL80211_MESH_SETUP_IE /** * enum nl80211_attrs - nl80211 netlink attributes @@ -860,7 +944,7 @@ enum nl80211_commands { * This can be used to mask out antennas which are not attached or should * not be used for receiving. If an antenna is not selected in this bitmap * the hardware should not be configured to receive on this antenna. - * For a more detailed descripton see @NL80211_ATTR_WIPHY_ANTENNA_TX. + * For a more detailed description see @NL80211_ATTR_WIPHY_ANTENNA_TX. * * @NL80211_ATTR_WIPHY_ANTENNA_AVAIL_TX: Bitmap of antennas which are available * for configuration as TX antennas via the above parameters. @@ -886,12 +970,37 @@ enum nl80211_commands { * changed once the mesh is active. * @NL80211_ATTR_MESH_CONFIG: Mesh configuration parameters, a nested attribute * containing attributes from &enum nl80211_meshconf_params. + * @NL80211_ATTR_SUPPORT_MESH_AUTH: Currently, this means the underlying driver + * allows auth frames in a mesh to be passed to userspace for processing via + * the @NL80211_MESH_SETUP_USERSPACE_AUTH flag. + * @NL80211_ATTR_STA_PLINK_STATE: The state of a mesh peer link as + * defined in &enum nl80211_plink_state. Used when userspace is + * driving the peer link management state machine. + * @NL80211_MESH_SETUP_USERSPACE_AMPE must be enabled. + * + * @NL80211_ATTR_WOWLAN_SUPPORTED: indicates, as part of the wiphy capabilities, + * the supported WoWLAN triggers + * @NL80211_ATTR_WOWLAN_TRIGGERS: used by %NL80211_CMD_SET_WOWLAN to + * indicate which WoW triggers should be enabled. This is also + * used by %NL80211_CMD_GET_WOWLAN to get the currently enabled WoWLAN + * triggers. + + * @NL80211_ATTR_SCHED_SCAN_INTERVAL: Interval between scheduled scan + * cycles, in msecs. + * + * @NL80211_ATTR_INTERFACE_COMBINATIONS: Nested attribute listing the supported + * interface combinations. In each nested item, it contains attributes + * defined in &enum nl80211_if_combination_attrs. + * @NL80211_ATTR_SOFTWARE_IFTYPES: Nested attribute (just like + * %NL80211_ATTR_SUPPORTED_IFTYPES) containing the interface types that + * are managed in software: interfaces of these types aren't subject to + * any restrictions in their number or combinations. * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ enum nl80211_attrs { -/* don't change the order or add anything inbetween, this is ABI! */ +/* don't change the order or add anything between, this is ABI! */ NL80211_ATTR_UNSPEC, NL80211_ATTR_WIPHY, @@ -1074,6 +1183,17 @@ enum nl80211_attrs { NL80211_ATTR_WIPHY_ANTENNA_AVAIL_TX, NL80211_ATTR_WIPHY_ANTENNA_AVAIL_RX, + NL80211_ATTR_SUPPORT_MESH_AUTH, + NL80211_ATTR_STA_PLINK_STATE, + + NL80211_ATTR_WOWLAN_TRIGGERS, + NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED, + + NL80211_ATTR_SCHED_SCAN_INTERVAL, + + NL80211_ATTR_INTERFACE_COMBINATIONS, + NL80211_ATTR_SOFTWARE_IFTYPES, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -1126,7 +1246,9 @@ enum nl80211_attrs { * @NL80211_IFTYPE_ADHOC: independent BSS member * @NL80211_IFTYPE_STATION: managed BSS member * @NL80211_IFTYPE_AP: access point - * @NL80211_IFTYPE_AP_VLAN: VLAN interface for access points + * @NL80211_IFTYPE_AP_VLAN: VLAN interface for access points; VLAN interfaces + * are a bit special in that they must always be tied to a pre-existing + * AP type interface. * @NL80211_IFTYPE_WDS: wireless distribution interface * @NL80211_IFTYPE_MONITOR: monitor interface receiving all frames * @NL80211_IFTYPE_MESH_POINT: mesh point @@ -1168,6 +1290,7 @@ enum nl80211_iftype { * with short barker preamble * @NL80211_STA_FLAG_WME: station is WME/QoS capable * @NL80211_STA_FLAG_MFP: station uses management frame protection + * @NL80211_STA_FLAG_AUTHENTICATED: station is authenticated * @NL80211_STA_FLAG_MAX: highest station flag number currently defined * @__NL80211_STA_FLAG_AFTER_LAST: internal use */ @@ -1177,6 +1300,7 @@ enum nl80211_sta_flags { NL80211_STA_FLAG_SHORT_PREAMBLE, NL80211_STA_FLAG_WME, NL80211_STA_FLAG_MFP, + NL80211_STA_FLAG_AUTHENTICATED, /* keep last */ __NL80211_STA_FLAG_AFTER_LAST, @@ -1222,6 +1346,36 @@ enum nl80211_rate_info { }; /** + * enum nl80211_sta_bss_param - BSS information collected by STA + * + * These attribute types are used with %NL80211_STA_INFO_BSS_PARAM + * when getting information about the bitrate of a station. + * + * @__NL80211_STA_BSS_PARAM_INVALID: attribute number 0 is reserved + * @NL80211_STA_BSS_PARAM_CTS_PROT: whether CTS protection is enabled (flag) + * @NL80211_STA_BSS_PARAM_SHORT_PREAMBLE: whether short preamble is enabled + * (flag) + * @NL80211_STA_BSS_PARAM_SHORT_SLOT_TIME: whether short slot time is enabled + * (flag) + * @NL80211_STA_BSS_PARAM_DTIM_PERIOD: DTIM period for beaconing (u8) + * @NL80211_STA_BSS_PARAM_BEACON_INTERVAL: Beacon interval (u16) + * @NL80211_STA_BSS_PARAM_MAX: highest sta_bss_param number currently defined + * @__NL80211_STA_BSS_PARAM_AFTER_LAST: internal use + */ +enum nl80211_sta_bss_param { + __NL80211_STA_BSS_PARAM_INVALID, + NL80211_STA_BSS_PARAM_CTS_PROT, + NL80211_STA_BSS_PARAM_SHORT_PREAMBLE, + NL80211_STA_BSS_PARAM_SHORT_SLOT_TIME, + NL80211_STA_BSS_PARAM_DTIM_PERIOD, + NL80211_STA_BSS_PARAM_BEACON_INTERVAL, + + /* keep last */ + __NL80211_STA_BSS_PARAM_AFTER_LAST, + NL80211_STA_BSS_PARAM_MAX = __NL80211_STA_BSS_PARAM_AFTER_LAST - 1 +}; + +/** * enum nl80211_sta_info - station information * * These attribute types are used with %NL80211_ATTR_STA_INFO @@ -1233,7 +1387,7 @@ enum nl80211_rate_info { * @NL80211_STA_INFO_TX_BYTES: total transmitted bytes (u32, to this station) * @NL80211_STA_INFO_SIGNAL: signal strength of last received PPDU (u8, dBm) * @NL80211_STA_INFO_TX_BITRATE: current unicast tx rate, nested attribute - * containing info as possible, see &enum nl80211_sta_info_txrate. + * containing info as possible, see &enum nl80211_rate_info * @NL80211_STA_INFO_RX_PACKETS: total received packet (u32, from this station) * @NL80211_STA_INFO_TX_PACKETS: total transmitted packets (u32, to this * station) @@ -1243,8 +1397,12 @@ enum nl80211_rate_info { * @NL80211_STA_INFO_LLID: the station's mesh LLID * @NL80211_STA_INFO_PLID: the station's mesh PLID * @NL80211_STA_INFO_PLINK_STATE: peer link state for the station + * (see %enum nl80211_plink_state) * @NL80211_STA_INFO_RX_BITRATE: last unicast data frame rx rate, nested * attribute, like NL80211_STA_INFO_TX_BITRATE. + * @NL80211_STA_INFO_BSS_PARAM: current station's view of BSS, nested attribute + * containing info as possible, see &enum nl80211_sta_bss_param + * @NL80211_STA_INFO_CONNECTED_TIME: time since the station is last connected * @__NL80211_STA_INFO_AFTER_LAST: internal * @NL80211_STA_INFO_MAX: highest possible station info attribute */ @@ -1264,6 +1422,8 @@ enum nl80211_sta_info { NL80211_STA_INFO_TX_FAILED, NL80211_STA_INFO_SIGNAL_AVG, NL80211_STA_INFO_RX_BITRATE, + NL80211_STA_INFO_BSS_PARAM, + NL80211_STA_INFO_CONNECTED_TIME, /* keep last */ __NL80211_STA_INFO_AFTER_LAST, @@ -1419,7 +1579,7 @@ enum nl80211_bitrate_attr { * 802.11 country information element with regulatory information it * thinks we should consider. cfg80211 only processes the country * code from the IE, and relies on the regulatory domain information - * structure pased by userspace (CRDA) from our wireless-regdb. + * structure passed by userspace (CRDA) from our wireless-regdb. * If a channel is enabled but the country code indicates it should * be disabled we disable the channel and re-enable it upon disassociation. */ @@ -1598,7 +1758,7 @@ enum nl80211_mntr_flags { * @NL80211_MESHCONF_RETRY_TIMEOUT: specifies the initial retry timeout in * millisecond units, used by the Peer Link Open message * - * @NL80211_MESHCONF_CONFIRM_TIMEOUT: specifies the inital confirm timeout, in + * @NL80211_MESHCONF_CONFIRM_TIMEOUT: specifies the initial confirm timeout, in * millisecond units, used by the peer link management to close a peer link * * @NL80211_MESHCONF_HOLDING_TIMEOUT: specifies the holding timeout, in @@ -1686,9 +1846,21 @@ enum nl80211_meshconf_params { * vendor specific path metric or disable it to use the default Airtime * metric. * - * @NL80211_MESH_SETUP_VENDOR_PATH_SEL_IE: A vendor specific information - * element that vendors will use to identify the path selection methods and - * metrics in use. + * @NL80211_MESH_SETUP_IE: Information elements for this mesh, for instance, a + * robust security network ie, or a vendor specific information element that + * vendors will use to identify the path selection methods and metrics in use. + * + * @NL80211_MESH_SETUP_USERSPACE_AUTH: Enable this option if an authentication + * daemon will be authenticating mesh candidates. + * + * @NL80211_MESH_SETUP_USERSPACE_AMPE: Enable this option if an authentication + * daemon will be securing peer link frames. AMPE is a secured version of Mesh + * Peering Management (MPM) and is implemented with the assistance of a + * userspace daemon. When this flag is set, the kernel will send peer + * management frames to a userspace daemon that will implement AMPE + * functionality (security capabilities selection, key confirmation, and key + * management). When the flag is unset (default), the kernel can autonomously + * complete (unsecured) mesh peering without the need of a userspace daemon. * * @NL80211_MESH_SETUP_ATTR_MAX: highest possible mesh setup attribute number * @__NL80211_MESH_SETUP_ATTR_AFTER_LAST: Internal use @@ -1697,7 +1869,9 @@ enum nl80211_mesh_setup_params { __NL80211_MESH_SETUP_INVALID, NL80211_MESH_SETUP_ENABLE_VENDOR_PATH_SEL, NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC, - NL80211_MESH_SETUP_VENDOR_PATH_SEL_IE, + NL80211_MESH_SETUP_IE, + NL80211_MESH_SETUP_USERSPACE_AUTH, + NL80211_MESH_SETUP_USERSPACE_AMPE, /* keep last */ __NL80211_MESH_SETUP_ATTR_AFTER_LAST, @@ -2002,4 +2176,189 @@ enum nl80211_tx_power_setting { NL80211_TX_POWER_FIXED, }; +/** + * enum nl80211_wowlan_packet_pattern_attr - WoWLAN packet pattern attribute + * @__NL80211_WOWLAN_PKTPAT_INVALID: invalid number for nested attribute + * @NL80211_WOWLAN_PKTPAT_PATTERN: the pattern, values where the mask has + * a zero bit are ignored + * @NL80211_WOWLAN_PKTPAT_MASK: pattern mask, must be long enough to have + * a bit for each byte in the pattern. The lowest-order bit corresponds + * to the first byte of the pattern, but the bytes of the pattern are + * in a little-endian-like format, i.e. the 9th byte of the pattern + * corresponds to the lowest-order bit in the second byte of the mask. + * For example: The match 00:xx:00:00:xx:00:00:00:00:xx:xx:xx (where + * xx indicates "don't care") would be represented by a pattern of + * twelve zero bytes, and a mask of "0xed,0x07". + * Note that the pattern matching is done as though frames were not + * 802.11 frames but 802.3 frames, i.e. the frame is fully unpacked + * first (including SNAP header unpacking) and then matched. + * @NUM_NL80211_WOWLAN_PKTPAT: number of attributes + * @MAX_NL80211_WOWLAN_PKTPAT: max attribute number + */ +enum nl80211_wowlan_packet_pattern_attr { + __NL80211_WOWLAN_PKTPAT_INVALID, + NL80211_WOWLAN_PKTPAT_MASK, + NL80211_WOWLAN_PKTPAT_PATTERN, + + NUM_NL80211_WOWLAN_PKTPAT, + MAX_NL80211_WOWLAN_PKTPAT = NUM_NL80211_WOWLAN_PKTPAT - 1, +}; + +/** + * struct nl80211_wowlan_pattern_support - pattern support information + * @max_patterns: maximum number of patterns supported + * @min_pattern_len: minimum length of each pattern + * @max_pattern_len: maximum length of each pattern + * + * This struct is carried in %NL80211_WOWLAN_TRIG_PKT_PATTERN when + * that is part of %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED in the + * capability information given by the kernel to userspace. + */ +struct nl80211_wowlan_pattern_support { + __u32 max_patterns; + __u32 min_pattern_len; + __u32 max_pattern_len; +} __attribute__((packed)); + +/** + * enum nl80211_wowlan_triggers - WoWLAN trigger definitions + * @__NL80211_WOWLAN_TRIG_INVALID: invalid number for nested attributes + * @NL80211_WOWLAN_TRIG_ANY: wake up on any activity, do not really put + * the chip into a special state -- works best with chips that have + * support for low-power operation already (flag) + * @NL80211_WOWLAN_TRIG_DISCONNECT: wake up on disconnect, the way disconnect + * is detected is implementation-specific (flag) + * @NL80211_WOWLAN_TRIG_MAGIC_PKT: wake up on magic packet (6x 0xff, followed + * by 16 repetitions of MAC addr, anywhere in payload) (flag) + * @NL80211_WOWLAN_TRIG_PKT_PATTERN: wake up on the specified packet patterns + * which are passed in an array of nested attributes, each nested attribute + * defining a with attributes from &struct nl80211_wowlan_trig_pkt_pattern. + * Each pattern defines a wakeup packet. The matching is done on the MSDU, + * i.e. as though the packet was an 802.3 packet, so the pattern matching + * is done after the packet is converted to the MSDU. + * + * In %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED, it is a binary attribute + * carrying a &struct nl80211_wowlan_pattern_support. + * @NUM_NL80211_WOWLAN_TRIG: number of wake on wireless triggers + * @MAX_NL80211_WOWLAN_TRIG: highest wowlan trigger attribute number + */ +enum nl80211_wowlan_triggers { + __NL80211_WOWLAN_TRIG_INVALID, + NL80211_WOWLAN_TRIG_ANY, + NL80211_WOWLAN_TRIG_DISCONNECT, + NL80211_WOWLAN_TRIG_MAGIC_PKT, + NL80211_WOWLAN_TRIG_PKT_PATTERN, + + /* keep last */ + NUM_NL80211_WOWLAN_TRIG, + MAX_NL80211_WOWLAN_TRIG = NUM_NL80211_WOWLAN_TRIG - 1 +}; + +/** + * enum nl80211_iface_limit_attrs - limit attributes + * @NL80211_IFACE_LIMIT_UNSPEC: (reserved) + * @NL80211_IFACE_LIMIT_MAX: maximum number of interfaces that + * can be chosen from this set of interface types (u32) + * @NL80211_IFACE_LIMIT_TYPES: nested attribute containing a + * flag attribute for each interface type in this set + * @NUM_NL80211_IFACE_LIMIT: number of attributes + * @MAX_NL80211_IFACE_LIMIT: highest attribute number + */ +enum nl80211_iface_limit_attrs { + NL80211_IFACE_LIMIT_UNSPEC, + NL80211_IFACE_LIMIT_MAX, + NL80211_IFACE_LIMIT_TYPES, + + /* keep last */ + NUM_NL80211_IFACE_LIMIT, + MAX_NL80211_IFACE_LIMIT = NUM_NL80211_IFACE_LIMIT - 1 +}; + +/** + * enum nl80211_if_combination_attrs -- interface combination attributes + * + * @NL80211_IFACE_COMB_UNSPEC: (reserved) + * @NL80211_IFACE_COMB_LIMITS: Nested attributes containing the limits + * for given interface types, see &enum nl80211_iface_limit_attrs. + * @NL80211_IFACE_COMB_MAXNUM: u32 attribute giving the total number of + * interfaces that can be created in this group. This number doesn't + * apply to interfaces purely managed in software, which are listed + * in a separate attribute %NL80211_ATTR_INTERFACES_SOFTWARE. + * @NL80211_IFACE_COMB_STA_AP_BI_MATCH: flag attribute specifying that + * beacon intervals within this group must be all the same even for + * infrastructure and AP/GO combinations, i.e. the GO(s) must adopt + * the infrastructure network's beacon interval. + * @NL80211_IFACE_COMB_NUM_CHANNELS: u32 attribute specifying how many + * different channels may be used within this group. + * @NUM_NL80211_IFACE_COMB: number of attributes + * @MAX_NL80211_IFACE_COMB: highest attribute number + * + * Examples: + * limits = [ #{STA} <= 1, #{AP} <= 1 ], matching BI, channels = 1, max = 2 + * => allows an AP and a STA that must match BIs + * + * numbers = [ #{AP, P2P-GO} <= 8 ], channels = 1, max = 8 + * => allows 8 of AP/GO + * + * numbers = [ #{STA} <= 2 ], channels = 2, max = 2 + * => allows two STAs on different channels + * + * numbers = [ #{STA} <= 1, #{P2P-client,P2P-GO} <= 3 ], max = 4 + * => allows a STA plus three P2P interfaces + * + * The list of these four possiblities could completely be contained + * within the %NL80211_ATTR_INTERFACE_COMBINATIONS attribute to indicate + * that any of these groups must match. + * + * "Combinations" of just a single interface will not be listed here, + * a single interface of any valid interface type is assumed to always + * be possible by itself. This means that implicitly, for each valid + * interface type, the following group always exists: + * numbers = [ #{<type>} <= 1 ], channels = 1, max = 1 + */ +enum nl80211_if_combination_attrs { + NL80211_IFACE_COMB_UNSPEC, + NL80211_IFACE_COMB_LIMITS, + NL80211_IFACE_COMB_MAXNUM, + NL80211_IFACE_COMB_STA_AP_BI_MATCH, + NL80211_IFACE_COMB_NUM_CHANNELS, + + /* keep last */ + NUM_NL80211_IFACE_COMB, + MAX_NL80211_IFACE_COMB = NUM_NL80211_IFACE_COMB - 1 +}; + + +/** + * enum nl80211_plink_state - state of a mesh peer link finite state machine + * + * @NL80211_PLINK_LISTEN: initial state, considered the implicit + * state of non existant mesh peer links + * @NL80211_PLINK_OPN_SNT: mesh plink open frame has been sent to + * this mesh peer + * @NL80211_PLINK_OPN_RCVD: mesh plink open frame has been received + * from this mesh peer + * @NL80211_PLINK_CNF_RCVD: mesh plink confirm frame has been + * received from this mesh peer + * @NL80211_PLINK_ESTAB: mesh peer link is established + * @NL80211_PLINK_HOLDING: mesh peer link is being closed or cancelled + * @NL80211_PLINK_BLOCKED: all frames transmitted from this mesh + * plink are discarded + * @NUM_NL80211_PLINK_STATES: number of peer link states + * @MAX_NL80211_PLINK_STATES: highest numerical value of plink states + */ +enum nl80211_plink_state { + NL80211_PLINK_LISTEN, + NL80211_PLINK_OPN_SNT, + NL80211_PLINK_OPN_RCVD, + NL80211_PLINK_CNF_RCVD, + NL80211_PLINK_ESTAB, + NL80211_PLINK_HOLDING, + NL80211_PLINK_BLOCKED, + + /* keep last */ + NUM_NL80211_PLINK_STATES, + MAX_NL80211_PLINK_STATES = NUM_NL80211_PLINK_STATES - 1 +}; + #endif /* __LINUX_NL80211_H */ diff --git a/include/linux/notifier.h b/include/linux/notifier.h index 2026f9e1ceb8..621dfa16acc0 100644 --- a/include/linux/notifier.h +++ b/include/linux/notifier.h @@ -237,7 +237,7 @@ static inline int notifier_to_errno(int ret) * enabling interrupts. Must not sleep, * must not fail */ -/* Used for CPU hotplug events occuring while tasks are frozen due to a suspend +/* Used for CPU hotplug events occurring while tasks are frozen due to a suspend * operation in progress */ #define CPU_TASKS_FROZEN 0x0010 diff --git a/include/linux/of_device.h b/include/linux/of_device.h index 8bfe6c1d4365..ae5638480ef2 100644 --- a/include/linux/of_device.h +++ b/include/linux/of_device.h @@ -21,8 +21,7 @@ extern void of_device_make_bus_id(struct device *dev); static inline int of_driver_match_device(struct device *dev, const struct device_driver *drv) { - dev->of_match = of_match_device(drv->of_match_table, dev); - return dev->of_match != NULL; + return of_match_device(drv->of_match_table, dev) != NULL; } extern struct platform_device *of_dev_get(struct platform_device *dev); @@ -58,6 +57,11 @@ static inline int of_device_uevent(struct device *dev, static inline void of_device_node_put(struct device *dev) { } +static inline const struct of_device_id *of_match_device( + const struct of_device_id *matches, const struct device *dev) +{ + return NULL; +} #endif /* CONFIG_OF_DEVICE */ #endif /* _LINUX_OF_DEVICE_H */ diff --git a/include/linux/of_irq.h b/include/linux/of_irq.h index 109e013b1772..e6955f5d1f08 100644 --- a/include/linux/of_irq.h +++ b/include/linux/of_irq.h @@ -68,6 +68,7 @@ extern int of_irq_to_resource(struct device_node *dev, int index, extern int of_irq_count(struct device_node *dev); extern int of_irq_to_resource_table(struct device_node *dev, struct resource *res, int nr_irqs); +extern struct device_node *of_irq_find_parent(struct device_node *child); #endif /* CONFIG_OF_IRQ */ #endif /* CONFIG_OF */ diff --git a/include/linux/omap3isp.h b/include/linux/omap3isp.h index 150822b4dbff..b6111f8cd49a 100644 --- a/include/linux/omap3isp.h +++ b/include/linux/omap3isp.h @@ -250,7 +250,7 @@ enum omap3isp_h3a_af_rgbpos { /* Contains the information regarding the Horizontal Median Filter */ struct omap3isp_h3a_af_hmf { __u8 enable; /* Status of Horizontal Median Filter */ - __u8 threshold; /* Threshhold Value for Horizontal Median Filter */ + __u8 threshold; /* Threshold Value for Horizontal Median Filter */ }; /* Contains the information regarding the IIR Filters */ diff --git a/include/linux/page_cgroup.h b/include/linux/page_cgroup.h index f5de21de31dd..961ecc7d30bc 100644 --- a/include/linux/page_cgroup.h +++ b/include/linux/page_cgroup.h @@ -138,7 +138,7 @@ static inline void move_unlock_page_cgroup(struct page_cgroup *pc, #define PCG_ARRAYID_OFFSET (BITS_PER_LONG - PCG_ARRAYID_WIDTH) /* - * Zero the shift count for non-existant fields, to prevent compiler + * Zero the shift count for non-existent fields, to prevent compiler * warnings and ensure references are optimized away. */ #define PCG_ARRAYID_SHIFT (PCG_ARRAYID_OFFSET * (PCG_ARRAYID_WIDTH != 0)) diff --git a/include/linux/pci-ats.h b/include/linux/pci-ats.h new file mode 100644 index 000000000000..655824fa4c76 --- /dev/null +++ b/include/linux/pci-ats.h @@ -0,0 +1,52 @@ +#ifndef LINUX_PCI_ATS_H +#define LINUX_PCI_ATS_H + +/* Address Translation Service */ +struct pci_ats { + int pos; /* capability position */ + int stu; /* Smallest Translation Unit */ + int qdep; /* Invalidate Queue Depth */ + int ref_cnt; /* Physical Function reference count */ + unsigned int is_enabled:1; /* Enable bit is set */ +}; + +#ifdef CONFIG_PCI_IOV + +extern int pci_enable_ats(struct pci_dev *dev, int ps); +extern void pci_disable_ats(struct pci_dev *dev); +extern int pci_ats_queue_depth(struct pci_dev *dev); +/** + * pci_ats_enabled - query the ATS status + * @dev: the PCI device + * + * Returns 1 if ATS capability is enabled, or 0 if not. + */ +static inline int pci_ats_enabled(struct pci_dev *dev) +{ + return dev->ats && dev->ats->is_enabled; +} + +#else /* CONFIG_PCI_IOV */ + +static inline int pci_enable_ats(struct pci_dev *dev, int ps) +{ + return -ENODEV; +} + +static inline void pci_disable_ats(struct pci_dev *dev) +{ +} + +static inline int pci_ats_queue_depth(struct pci_dev *dev) +{ + return -ENODEV; +} + +static inline int pci_ats_enabled(struct pci_dev *dev) +{ + return 0; +} + +#endif /* CONFIG_PCI_IOV */ + +#endif /* LINUX_PCI_ATS_H*/ diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 11fd38151cc9..8652a4fa3fe2 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -518,7 +518,7 @@ #define PCI_DEVICE_ID_AMD_11H_NB_MISC 0x1303 #define PCI_DEVICE_ID_AMD_11H_NB_LINK 0x1304 #define PCI_DEVICE_ID_AMD_15H_NB_F3 0x1603 -#define PCI_DEVICE_ID_AMD_15H_NB_LINK 0x1604 +#define PCI_DEVICE_ID_AMD_15H_NB_F4 0x1604 #define PCI_DEVICE_ID_AMD_CNB17H_F3 0x1703 #define PCI_DEVICE_ID_AMD_LANCE 0x2000 #define PCI_DEVICE_ID_AMD_LANCE_HOME 0x2001 @@ -608,6 +608,8 @@ #define PCI_DEVICE_ID_MATROX_G550 0x2527 #define PCI_DEVICE_ID_MATROX_VIA 0x4536 +#define PCI_VENDOR_ID_MOBILITY_ELECTRONICS 0x14f2 + #define PCI_VENDOR_ID_CT 0x102c #define PCI_DEVICE_ID_CT_69000 0x00c0 #define PCI_DEVICE_ID_CT_65545 0x00d8 @@ -2477,15 +2479,12 @@ #define PCI_DEVICE_ID_INTEL_82840_HB 0x1a21 #define PCI_DEVICE_ID_INTEL_82845_HB 0x1a30 #define PCI_DEVICE_ID_INTEL_IOAT 0x1a38 -#define PCI_DEVICE_ID_INTEL_COUGARPOINT_SMBUS 0x1c22 #define PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_MIN 0x1c41 #define PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_MAX 0x1c5f -#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS 0x1d22 #define PCI_DEVICE_ID_INTEL_PATSBURG_LPC_0 0x1d40 #define PCI_DEVICE_ID_INTEL_PATSBURG_LPC_1 0x1d41 #define PCI_DEVICE_ID_INTEL_DH89XXCC_LPC_MIN 0x2310 #define PCI_DEVICE_ID_INTEL_DH89XXCC_LPC_MAX 0x231f -#define PCI_DEVICE_ID_INTEL_DH89XXCC_SMBUS 0x2330 #define PCI_DEVICE_ID_INTEL_82801AA_0 0x2410 #define PCI_DEVICE_ID_INTEL_82801AA_1 0x2411 #define PCI_DEVICE_ID_INTEL_82801AA_3 0x2413 @@ -2696,7 +2695,6 @@ #define PCI_DEVICE_ID_INTEL_ICH10_5 0x3a60 #define PCI_DEVICE_ID_INTEL_5_3400_SERIES_LPC_MIN 0x3b00 #define PCI_DEVICE_ID_INTEL_5_3400_SERIES_LPC_MAX 0x3b1f -#define PCI_DEVICE_ID_INTEL_5_3400_SERIES_SMBUS 0x3b30 #define PCI_DEVICE_ID_INTEL_IOAT_SNB 0x402f #define PCI_DEVICE_ID_INTEL_5100_16 0x65f0 #define PCI_DEVICE_ID_INTEL_5100_21 0x65f5 diff --git a/include/linux/pci_regs.h b/include/linux/pci_regs.h index 5b7e6b1ba54f..be01380f798a 100644 --- a/include/linux/pci_regs.h +++ b/include/linux/pci_regs.h @@ -223,7 +223,7 @@ #define PCI_PM_CAP_PME_CLOCK 0x0008 /* PME clock required */ #define PCI_PM_CAP_RESERVED 0x0010 /* Reserved field */ #define PCI_PM_CAP_DSI 0x0020 /* Device specific initialization */ -#define PCI_PM_CAP_AUX_POWER 0x01C0 /* Auxilliary power support mask */ +#define PCI_PM_CAP_AUX_POWER 0x01C0 /* Auxiliary power support mask */ #define PCI_PM_CAP_D1 0x0200 /* D1 power state support */ #define PCI_PM_CAP_D2 0x0400 /* D2 power state support */ #define PCI_PM_CAP_PME 0x0800 /* PME pin supported */ @@ -435,7 +435,7 @@ #define PCI_EXP_LNKCAP_L0SEL 0x00007000 /* L0s Exit Latency */ #define PCI_EXP_LNKCAP_L1EL 0x00038000 /* L1 Exit Latency */ #define PCI_EXP_LNKCAP_CLKPM 0x00040000 /* L1 Clock Power Management */ -#define PCI_EXP_LNKCAP_SDERC 0x00080000 /* Suprise Down Error Reporting Capable */ +#define PCI_EXP_LNKCAP_SDERC 0x00080000 /* Surprise Down Error Reporting Capable */ #define PCI_EXP_LNKCAP_DLLLARC 0x00100000 /* Data Link Layer Link Active Reporting Capable */ #define PCI_EXP_LNKCAP_LBNC 0x00200000 /* Link Bandwidth Notification Capability */ #define PCI_EXP_LNKCAP_PN 0xff000000 /* Port Number */ diff --git a/include/linux/percpu.h b/include/linux/percpu.h index 3a5c4449fd36..8b97308e65df 100644 --- a/include/linux/percpu.h +++ b/include/linux/percpu.h @@ -948,7 +948,7 @@ do { \ irqsafe_generic_cpu_cmpxchg_double(pcp1, pcp2, oval1, oval2, nval1, nval2) # endif # define irqsafe_cpu_cmpxchg_double(pcp1, pcp2, oval1, oval2, nval1, nval2) \ - __pcpu_double_call_return_int(irqsafe_cpu_cmpxchg_double_, (pcp1), (pcp2), (oval1), (oval2), (nval1), (nval2)) + __pcpu_double_call_return_bool(irqsafe_cpu_cmpxchg_double_, (pcp1), (pcp2), (oval1), (oval2), (nval1), (nval2)) #endif #endif /* __LINUX_PERCPU_H */ diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h index 311b4dc785a1..3412684ce5d5 100644 --- a/include/linux/perf_event.h +++ b/include/linux/perf_event.h @@ -2,8 +2,8 @@ * Performance events: * * Copyright (C) 2008-2009, Thomas Gleixner <tglx@linutronix.de> - * Copyright (C) 2008-2009, Red Hat, Inc., Ingo Molnar - * Copyright (C) 2008-2009, Red Hat, Inc., Peter Zijlstra + * Copyright (C) 2008-2011, Red Hat, Inc., Ingo Molnar + * Copyright (C) 2008-2011, Red Hat, Inc., Peter Zijlstra * * Data type definitions, declarations, prototypes. * @@ -52,6 +52,8 @@ enum perf_hw_id { PERF_COUNT_HW_BRANCH_INSTRUCTIONS = 4, PERF_COUNT_HW_BRANCH_MISSES = 5, PERF_COUNT_HW_BUS_CYCLES = 6, + PERF_COUNT_HW_STALLED_CYCLES_FRONTEND = 7, + PERF_COUNT_HW_STALLED_CYCLES_BACKEND = 8, PERF_COUNT_HW_MAX, /* non-ABI */ }; @@ -468,9 +470,9 @@ enum perf_callchain_context { PERF_CONTEXT_MAX = (__u64)-4095, }; -#define PERF_FLAG_FD_NO_GROUP (1U << 0) -#define PERF_FLAG_FD_OUTPUT (1U << 1) -#define PERF_FLAG_PID_CGROUP (1U << 2) /* pid=cgroup id, per-cpu mode only */ +#define PERF_FLAG_FD_NO_GROUP (1U << 0) +#define PERF_FLAG_FD_OUTPUT (1U << 1) +#define PERF_FLAG_PID_CGROUP (1U << 2) /* pid=cgroup id, per-cpu mode only */ #ifdef __KERNEL__ /* @@ -484,9 +486,9 @@ enum perf_callchain_context { #endif struct perf_guest_info_callbacks { - int (*is_in_guest) (void); - int (*is_user_mode) (void); - unsigned long (*get_guest_ip) (void); + int (*is_in_guest)(void); + int (*is_user_mode)(void); + unsigned long (*get_guest_ip)(void); }; #ifdef CONFIG_HAVE_HW_BREAKPOINT @@ -505,7 +507,7 @@ struct perf_guest_info_callbacks { #include <linux/ftrace.h> #include <linux/cpu.h> #include <linux/irq_work.h> -#include <linux/jump_label_ref.h> +#include <linux/jump_label.h> #include <asm/atomic.h> #include <asm/local.h> @@ -652,19 +654,19 @@ struct pmu { * Start the transaction, after this ->add() doesn't need to * do schedulability tests. */ - void (*start_txn) (struct pmu *pmu); /* optional */ + void (*start_txn) (struct pmu *pmu); /* optional */ /* * If ->start_txn() disabled the ->add() schedulability test * then ->commit_txn() is required to perform one. On success * the transaction is closed. On error the transaction is kept * open until ->cancel_txn() is called. */ - int (*commit_txn) (struct pmu *pmu); /* optional */ + int (*commit_txn) (struct pmu *pmu); /* optional */ /* * Will cancel the transaction, assumes ->del() is called - * for each successfull ->add() during the transaction. + * for each successful ->add() during the transaction. */ - void (*cancel_txn) (struct pmu *pmu); /* optional */ + void (*cancel_txn) (struct pmu *pmu); /* optional */ }; /** @@ -712,15 +714,15 @@ typedef void (*perf_overflow_handler_t)(struct perf_event *, int, struct pt_regs *regs); enum perf_group_flag { - PERF_GROUP_SOFTWARE = 0x1, + PERF_GROUP_SOFTWARE = 0x1, }; -#define SWEVENT_HLIST_BITS 8 -#define SWEVENT_HLIST_SIZE (1 << SWEVENT_HLIST_BITS) +#define SWEVENT_HLIST_BITS 8 +#define SWEVENT_HLIST_SIZE (1 << SWEVENT_HLIST_BITS) struct swevent_hlist { - struct hlist_head heads[SWEVENT_HLIST_SIZE]; - struct rcu_head rcu_head; + struct hlist_head heads[SWEVENT_HLIST_SIZE]; + struct rcu_head rcu_head; }; #define PERF_ATTACH_CONTEXT 0x01 @@ -733,13 +735,13 @@ struct swevent_hlist { * This is a per-cpu dynamically allocated data structure. */ struct perf_cgroup_info { - u64 time; - u64 timestamp; + u64 time; + u64 timestamp; }; struct perf_cgroup { - struct cgroup_subsys_state css; - struct perf_cgroup_info *info; /* timing info, one per cpu */ + struct cgroup_subsys_state css; + struct perf_cgroup_info *info; /* timing info, one per cpu */ }; #endif @@ -923,7 +925,7 @@ struct perf_event_context { /* * Number of contexts where an event can trigger: - * task, softirq, hardirq, nmi. + * task, softirq, hardirq, nmi. */ #define PERF_NR_CONTEXTS 4 @@ -1001,8 +1003,7 @@ struct perf_sample_data { struct perf_raw_record *raw; }; -static inline -void perf_sample_data_init(struct perf_sample_data *data, u64 addr) +static inline void perf_sample_data_init(struct perf_sample_data *data, u64 addr) { data->addr = addr; data->raw = NULL; @@ -1034,13 +1035,12 @@ static inline int is_software_event(struct perf_event *event) return event->pmu->task_ctx_nr == perf_sw_context; } -extern atomic_t perf_swevent_enabled[PERF_COUNT_SW_MAX]; +extern struct jump_label_key perf_swevent_enabled[PERF_COUNT_SW_MAX]; extern void __perf_sw_event(u32, u64, int, struct pt_regs *, u64); #ifndef perf_arch_fetch_caller_regs -static inline void -perf_arch_fetch_caller_regs(struct pt_regs *regs, unsigned long ip) { } +static inline void perf_arch_fetch_caller_regs(struct pt_regs *regs, unsigned long ip) { } #endif /* @@ -1063,30 +1063,28 @@ perf_sw_event(u32 event_id, u64 nr, int nmi, struct pt_regs *regs, u64 addr) { struct pt_regs hot_regs; - JUMP_LABEL(&perf_swevent_enabled[event_id], have_event); - return; - -have_event: - if (!regs) { - perf_fetch_caller_regs(&hot_regs); - regs = &hot_regs; + if (static_branch(&perf_swevent_enabled[event_id])) { + if (!regs) { + perf_fetch_caller_regs(&hot_regs); + regs = &hot_regs; + } + __perf_sw_event(event_id, nr, nmi, regs, addr); } - __perf_sw_event(event_id, nr, nmi, regs, addr); } -extern atomic_t perf_sched_events; +extern struct jump_label_key perf_sched_events; static inline void perf_event_task_sched_in(struct task_struct *task) { - COND_STMT(&perf_sched_events, __perf_event_task_sched_in(task)); + if (static_branch(&perf_sched_events)) + __perf_event_task_sched_in(task); } -static inline -void perf_event_task_sched_out(struct task_struct *task, struct task_struct *next) +static inline void perf_event_task_sched_out(struct task_struct *task, struct task_struct *next) { perf_sw_event(PERF_COUNT_SW_CONTEXT_SWITCHES, 1, 1, NULL, 0); - COND_STMT(&perf_sched_events, __perf_event_task_sched_out(task, next)); + __perf_event_task_sched_out(task, next); } extern void perf_event_mmap(struct vm_area_struct *vma); @@ -1100,14 +1098,10 @@ extern void perf_event_fork(struct task_struct *tsk); /* Callchains */ DECLARE_PER_CPU(struct perf_callchain_entry, perf_callchain_entry); -extern void perf_callchain_user(struct perf_callchain_entry *entry, - struct pt_regs *regs); -extern void perf_callchain_kernel(struct perf_callchain_entry *entry, - struct pt_regs *regs); - +extern void perf_callchain_user(struct perf_callchain_entry *entry, struct pt_regs *regs); +extern void perf_callchain_kernel(struct perf_callchain_entry *entry, struct pt_regs *regs); -static inline void -perf_callchain_store(struct perf_callchain_entry *entry, u64 ip) +static inline void perf_callchain_store(struct perf_callchain_entry *entry, u64 ip) { if (entry->nr < PERF_MAX_STACK_DEPTH) entry->ip[entry->nr++] = ip; @@ -1143,9 +1137,9 @@ extern void perf_tp_event(u64 addr, u64 count, void *record, extern void perf_bp_event(struct perf_event *event, void *data); #ifndef perf_misc_flags -#define perf_misc_flags(regs) (user_mode(regs) ? PERF_RECORD_MISC_USER : \ - PERF_RECORD_MISC_KERNEL) -#define perf_instruction_pointer(regs) instruction_pointer(regs) +# define perf_misc_flags(regs) \ + (user_mode(regs) ? PERF_RECORD_MISC_USER : PERF_RECORD_MISC_KERNEL) +# define perf_instruction_pointer(regs) instruction_pointer(regs) #endif extern int perf_output_begin(struct perf_output_handle *handle, @@ -1180,9 +1174,9 @@ static inline void perf_bp_event(struct perf_event *event, void *data) { } static inline int perf_register_guest_info_callbacks -(struct perf_guest_info_callbacks *callbacks) { return 0; } +(struct perf_guest_info_callbacks *callbacks) { return 0; } static inline int perf_unregister_guest_info_callbacks -(struct perf_guest_info_callbacks *callbacks) { return 0; } +(struct perf_guest_info_callbacks *callbacks) { return 0; } static inline void perf_event_mmap(struct vm_area_struct *vma) { } static inline void perf_event_comm(struct task_struct *tsk) { } @@ -1195,23 +1189,22 @@ static inline void perf_event_disable(struct perf_event *event) { } static inline void perf_event_task_tick(void) { } #endif -#define perf_output_put(handle, x) \ - perf_output_copy((handle), &(x), sizeof(x)) +#define perf_output_put(handle, x) perf_output_copy((handle), &(x), sizeof(x)) /* * This has to have a higher priority than migration_notifier in sched.c. */ -#define perf_cpu_notifier(fn) \ -do { \ - static struct notifier_block fn##_nb __cpuinitdata = \ - { .notifier_call = fn, .priority = CPU_PRI_PERF }; \ - fn(&fn##_nb, (unsigned long)CPU_UP_PREPARE, \ - (void *)(unsigned long)smp_processor_id()); \ - fn(&fn##_nb, (unsigned long)CPU_STARTING, \ - (void *)(unsigned long)smp_processor_id()); \ - fn(&fn##_nb, (unsigned long)CPU_ONLINE, \ - (void *)(unsigned long)smp_processor_id()); \ - register_cpu_notifier(&fn##_nb); \ +#define perf_cpu_notifier(fn) \ +do { \ + static struct notifier_block fn##_nb __cpuinitdata = \ + { .notifier_call = fn, .priority = CPU_PRI_PERF }; \ + fn(&fn##_nb, (unsigned long)CPU_UP_PREPARE, \ + (void *)(unsigned long)smp_processor_id()); \ + fn(&fn##_nb, (unsigned long)CPU_STARTING, \ + (void *)(unsigned long)smp_processor_id()); \ + fn(&fn##_nb, (unsigned long)CPU_ONLINE, \ + (void *)(unsigned long)smp_processor_id()); \ + register_cpu_notifier(&fn##_nb); \ } while (0) #endif /* __KERNEL__ */ diff --git a/include/linux/pid.h b/include/linux/pid.h index efceda0a51b1..cdced84261d7 100644 --- a/include/linux/pid.h +++ b/include/linux/pid.h @@ -21,7 +21,7 @@ enum pid_type * quickly from the numeric pid value. The attached processes may be * quickly accessed by following pointers from struct pid. * - * Storing pid_t values in the kernel and refering to them later has a + * Storing pid_t values in the kernel and referring to them later has a * problem. The process originally with that pid may have exited and the * pid allocator wrapped, and another process could have come along * and been assigned that pid. @@ -117,7 +117,7 @@ extern struct pid *find_vpid(int nr); */ extern struct pid *find_get_pid(int nr); extern struct pid *find_ge_pid(int nr, struct pid_namespace *); -int next_pidmap(struct pid_namespace *pid_ns, int last); +int next_pidmap(struct pid_namespace *pid_ns, unsigned int last); extern struct pid *alloc_pid(struct pid_namespace *ns); extern void free_pid(struct pid *pid); diff --git a/include/linux/pkt_sched.h b/include/linux/pkt_sched.h index b1032a3fafdc..c5336705921f 100644 --- a/include/linux/pkt_sched.h +++ b/include/linux/pkt_sched.h @@ -223,7 +223,7 @@ struct tc_gred_qopt { __u32 limit; /* HARD maximal queue length (bytes) */ __u32 qth_min; /* Min average length threshold (bytes) */ __u32 qth_max; /* Max average length threshold (bytes) */ - __u32 DP; /* upto 2^32 DPs */ + __u32 DP; /* up to 2^32 DPs */ __u32 backlog; __u32 qave; __u32 forced; @@ -588,4 +588,19 @@ struct tc_sfb_xstats { #define SFB_MAX_PROB 0xFFFF +/* QFQ */ +enum { + TCA_QFQ_UNSPEC, + TCA_QFQ_WEIGHT, + TCA_QFQ_LMAX, + __TCA_QFQ_MAX +}; + +#define TCA_QFQ_MAX (__TCA_QFQ_MAX - 1) + +struct tc_qfq_stats { + __u32 weight; + __u32 lmax; +}; + #endif diff --git a/include/linux/platform_device.h b/include/linux/platform_device.h index d96db9825708..ede1a80e3358 100644 --- a/include/linux/platform_device.h +++ b/include/linux/platform_device.h @@ -14,6 +14,8 @@ #include <linux/device.h> #include <linux/mod_devicetable.h> +struct mfd_cell; + struct platform_device { const char * name; int id; @@ -23,6 +25,9 @@ struct platform_device { const struct platform_device_id *id_entry; + /* MFD cell pointer */ + struct mfd_cell *mfd_cell; + /* arch specific additions */ struct pdev_archdata archdata; }; @@ -145,9 +150,6 @@ extern struct platform_device *platform_create_bundle(struct platform_driver *dr struct resource *res, unsigned int n_res, const void *data, size_t size); -extern const struct dev_pm_ops * platform_bus_get_pm_ops(void); -extern void platform_bus_set_pm_ops(const struct dev_pm_ops *pm); - /* early platform driver interface */ struct early_platform_driver { const char *class_str; @@ -200,4 +202,64 @@ static inline char *early_platform_driver_setup_func(void) \ } #endif /* MODULE */ +#ifdef CONFIG_PM_SLEEP +extern int platform_pm_prepare(struct device *dev); +extern void platform_pm_complete(struct device *dev); +#else +#define platform_pm_prepare NULL +#define platform_pm_complete NULL +#endif + +#ifdef CONFIG_SUSPEND +extern int platform_pm_suspend(struct device *dev); +extern int platform_pm_suspend_noirq(struct device *dev); +extern int platform_pm_resume(struct device *dev); +extern int platform_pm_resume_noirq(struct device *dev); +#else +#define platform_pm_suspend NULL +#define platform_pm_resume NULL +#define platform_pm_suspend_noirq NULL +#define platform_pm_resume_noirq NULL +#endif + +#ifdef CONFIG_HIBERNATE_CALLBACKS +extern int platform_pm_freeze(struct device *dev); +extern int platform_pm_freeze_noirq(struct device *dev); +extern int platform_pm_thaw(struct device *dev); +extern int platform_pm_thaw_noirq(struct device *dev); +extern int platform_pm_poweroff(struct device *dev); +extern int platform_pm_poweroff_noirq(struct device *dev); +extern int platform_pm_restore(struct device *dev); +extern int platform_pm_restore_noirq(struct device *dev); +#else +#define platform_pm_freeze NULL +#define platform_pm_thaw NULL +#define platform_pm_poweroff NULL +#define platform_pm_restore NULL +#define platform_pm_freeze_noirq NULL +#define platform_pm_thaw_noirq NULL +#define platform_pm_poweroff_noirq NULL +#define platform_pm_restore_noirq NULL +#endif + +#ifdef CONFIG_PM_SLEEP +#define USE_PLATFORM_PM_SLEEP_OPS \ + .prepare = platform_pm_prepare, \ + .complete = platform_pm_complete, \ + .suspend = platform_pm_suspend, \ + .resume = platform_pm_resume, \ + .freeze = platform_pm_freeze, \ + .thaw = platform_pm_thaw, \ + .poweroff = platform_pm_poweroff, \ + .restore = platform_pm_restore, \ + .suspend_noirq = platform_pm_suspend_noirq, \ + .resume_noirq = platform_pm_resume_noirq, \ + .freeze_noirq = platform_pm_freeze_noirq, \ + .thaw_noirq = platform_pm_thaw_noirq, \ + .poweroff_noirq = platform_pm_poweroff_noirq, \ + .restore_noirq = platform_pm_restore_noirq, +#else +#define USE_PLATFORM_PM_SLEEP_OPS +#endif + #endif /* _PLATFORM_DEVICE_H_ */ diff --git a/include/linux/pm.h b/include/linux/pm.h index 512e09177e57..3160648ccdda 100644 --- a/include/linux/pm.h +++ b/include/linux/pm.h @@ -460,6 +460,7 @@ struct dev_pm_info { unsigned long active_jiffies; unsigned long suspended_jiffies; unsigned long accounting_timestamp; + void *subsys_data; /* Owned by the subsystem. */ #endif }; @@ -529,21 +530,17 @@ struct dev_power_domain { */ #ifdef CONFIG_PM_SLEEP -#ifndef CONFIG_ARCH_NO_SYSDEV_OPS -extern int sysdev_suspend(pm_message_t state); -extern int sysdev_resume(void); -#else -static inline int sysdev_suspend(pm_message_t state) { return 0; } -static inline int sysdev_resume(void) { return 0; } -#endif - extern void device_pm_lock(void); extern void dpm_resume_noirq(pm_message_t state); extern void dpm_resume_end(pm_message_t state); +extern void dpm_resume(pm_message_t state); +extern void dpm_complete(pm_message_t state); extern void device_pm_unlock(void); extern int dpm_suspend_noirq(pm_message_t state); extern int dpm_suspend_start(pm_message_t state); +extern int dpm_suspend(pm_message_t state); +extern int dpm_prepare(pm_message_t state); extern void __suspend_report_result(const char *function, void *fn, int ret); @@ -553,6 +550,16 @@ extern void __suspend_report_result(const char *function, void *fn, int ret); } while (0) extern int device_pm_wait_for_dev(struct device *sub, struct device *dev); + +extern int pm_generic_prepare(struct device *dev); +extern int pm_generic_suspend(struct device *dev); +extern int pm_generic_resume(struct device *dev); +extern int pm_generic_freeze(struct device *dev); +extern int pm_generic_thaw(struct device *dev); +extern int pm_generic_restore(struct device *dev); +extern int pm_generic_poweroff(struct device *dev); +extern void pm_generic_complete(struct device *dev); + #else /* !CONFIG_PM_SLEEP */ #define device_pm_lock() do {} while (0) @@ -569,6 +576,15 @@ static inline int device_pm_wait_for_dev(struct device *a, struct device *b) { return 0; } + +#define pm_generic_prepare NULL +#define pm_generic_suspend NULL +#define pm_generic_resume NULL +#define pm_generic_freeze NULL +#define pm_generic_thaw NULL +#define pm_generic_restore NULL +#define pm_generic_poweroff NULL +#define pm_generic_complete NULL #endif /* !CONFIG_PM_SLEEP */ /* How to reorder dpm_list after device_move() */ @@ -579,11 +595,4 @@ enum dpm_order { DPM_ORDER_DEV_LAST, }; -extern int pm_generic_suspend(struct device *dev); -extern int pm_generic_resume(struct device *dev); -extern int pm_generic_freeze(struct device *dev); -extern int pm_generic_thaw(struct device *dev); -extern int pm_generic_restore(struct device *dev); -extern int pm_generic_poweroff(struct device *dev); - #endif /* _LINUX_PM_H */ diff --git a/include/linux/pm_runtime.h b/include/linux/pm_runtime.h index 8de9aa6e7def..878cf84baeb1 100644 --- a/include/linux/pm_runtime.h +++ b/include/linux/pm_runtime.h @@ -245,4 +245,46 @@ static inline void pm_runtime_dont_use_autosuspend(struct device *dev) __pm_runtime_use_autosuspend(dev, false); } +struct pm_clk_notifier_block { + struct notifier_block nb; + struct dev_power_domain *pwr_domain; + char *con_ids[]; +}; + +#ifdef CONFIG_PM_RUNTIME_CLK +extern int pm_runtime_clk_init(struct device *dev); +extern void pm_runtime_clk_destroy(struct device *dev); +extern int pm_runtime_clk_add(struct device *dev, const char *con_id); +extern void pm_runtime_clk_remove(struct device *dev, const char *con_id); +extern int pm_runtime_clk_suspend(struct device *dev); +extern int pm_runtime_clk_resume(struct device *dev); +#else +static inline int pm_runtime_clk_init(struct device *dev) +{ + return -EINVAL; +} +static inline void pm_runtime_clk_destroy(struct device *dev) +{ +} +static inline int pm_runtime_clk_add(struct device *dev, const char *con_id) +{ + return -EINVAL; +} +static inline void pm_runtime_clk_remove(struct device *dev, const char *con_id) +{ +} +#define pm_runtime_clock_suspend NULL +#define pm_runtime_clock_resume NULL +#endif + +#ifdef CONFIG_HAVE_CLK +extern void pm_runtime_clk_add_notifier(struct bus_type *bus, + struct pm_clk_notifier_block *clknb); +#else +static inline void pm_runtime_clk_add_notifier(struct bus_type *bus, + struct pm_clk_notifier_block *clknb) +{ +} +#endif + #endif diff --git a/include/linux/poll.h b/include/linux/poll.h index 1a2ccd6f3823..cf40010ce0cd 100644 --- a/include/linux/poll.h +++ b/include/linux/poll.h @@ -82,7 +82,7 @@ static inline int poll_schedule(struct poll_wqueues *pwq, int state) } /* - * Scaleable version of the fd_set. + * Scalable version of the fd_set. */ typedef struct { diff --git a/include/linux/posix-clock.h b/include/linux/posix-clock.h index 369e19d3750b..7f1183dcd119 100644 --- a/include/linux/posix-clock.h +++ b/include/linux/posix-clock.h @@ -24,6 +24,7 @@ #include <linux/fs.h> #include <linux/poll.h> #include <linux/posix-timers.h> +#include <linux/rwsem.h> struct posix_clock; @@ -104,7 +105,7 @@ struct posix_clock_operations { * @ops: Functional interface to the clock * @cdev: Character device instance for this clock * @kref: Reference count. - * @mutex: Protects the 'zombie' field from concurrent access. + * @rwsem: Protects the 'zombie' field from concurrent access. * @zombie: If 'zombie' is true, then the hardware has disappeared. * @release: A function to free the structure when the reference count reaches * zero. May be NULL if structure is statically allocated. @@ -117,7 +118,7 @@ struct posix_clock { struct posix_clock_operations ops; struct cdev cdev; struct kref kref; - struct mutex mutex; + struct rw_semaphore rwsem; bool zombie; void (*release)(struct posix_clock *clk); }; diff --git a/include/linux/posix-timers.h b/include/linux/posix-timers.h index d51243ae0726..808227d40a64 100644 --- a/include/linux/posix-timers.h +++ b/include/linux/posix-timers.h @@ -5,6 +5,7 @@ #include <linux/list.h> #include <linux/sched.h> #include <linux/timex.h> +#include <linux/alarmtimer.h> union cpu_time_count { cputime_t cpu; @@ -80,6 +81,7 @@ struct k_itimer { unsigned long incr; unsigned long expires; } mmtimer; + struct alarm alarmtimer; } it; }; diff --git a/include/linux/prefetch.h b/include/linux/prefetch.h index af7c36a5a521..a3bfbdf63d32 100644 --- a/include/linux/prefetch.h +++ b/include/linux/prefetch.h @@ -29,7 +29,7 @@ prefetchw(x) - prefetches the cacheline at "x" for write spin_lock_prefetch(x) - prefetches the spinlock *x for taking - there is also PREFETCH_STRIDE which is the architecure-prefered + there is also PREFETCH_STRIDE which is the architecure-preferred "lookahead" size for prefetching streamed operations. */ diff --git a/include/linux/proc_fs.h b/include/linux/proc_fs.h index 838c1149251a..eaf4350c0f90 100644 --- a/include/linux/proc_fs.h +++ b/include/linux/proc_fs.h @@ -208,6 +208,8 @@ static inline struct proc_dir_entry *proc_symlink(const char *name, struct proc_dir_entry *parent,const char *dest) {return NULL;} static inline struct proc_dir_entry *proc_mkdir(const char *name, struct proc_dir_entry *parent) {return NULL;} +static inline struct proc_dir_entry *proc_mkdir_mode(const char *name, + mode_t mode, struct proc_dir_entry *parent) { return NULL; } static inline struct proc_dir_entry *create_proc_read_entry(const char *name, mode_t mode, struct proc_dir_entry *base, diff --git a/include/linux/pstore.h b/include/linux/pstore.h index 41977737bb7d..2455ef2683f0 100644 --- a/include/linux/pstore.h +++ b/include/linux/pstore.h @@ -35,7 +35,9 @@ struct pstore_info { struct mutex buf_mutex; /* serialize access to 'buf' */ char *buf; size_t bufsize; - size_t (*read)(u64 *id, enum pstore_type_id *type, + int (*open)(struct pstore_info *psi); + int (*close)(struct pstore_info *psi); + ssize_t (*read)(u64 *id, enum pstore_type_id *type, struct timespec *time); u64 (*write)(enum pstore_type_id type, size_t size); int (*erase)(u64 id); diff --git a/include/linux/ptrace.h b/include/linux/ptrace.h index a1147e5dd245..9178d5cc0b01 100644 --- a/include/linux/ptrace.h +++ b/include/linux/ptrace.h @@ -189,6 +189,10 @@ static inline void ptrace_init_task(struct task_struct *child, bool ptrace) child->ptrace = current->ptrace; __ptrace_link(child, current->parent); } + +#ifdef CONFIG_HAVE_HW_BREAKPOINT + atomic_set(&child->ptrace_bp_refcnt, 1); +#endif } /** @@ -350,6 +354,13 @@ extern int task_current_syscall(struct task_struct *target, long *callno, unsigned long args[6], unsigned int maxargs, unsigned long *sp, unsigned long *pc); -#endif +#ifdef CONFIG_HAVE_HW_BREAKPOINT +extern int ptrace_get_breakpoints(struct task_struct *tsk); +extern void ptrace_put_breakpoints(struct task_struct *tsk); +#else +static inline void ptrace_put_breakpoints(struct task_struct *tsk) { } +#endif /* CONFIG_HAVE_HW_BREAKPOINT */ + +#endif /* __KERNEL */ #endif diff --git a/include/linux/pxa2xx_ssp.h b/include/linux/pxa2xx_ssp.h index 2f691e4e6222..44835fb39793 100644 --- a/include/linux/pxa2xx_ssp.h +++ b/include/linux/pxa2xx_ssp.h @@ -122,7 +122,7 @@ #define SSCR1_TSRE (1 << 21) /* Transmit Service Request Enable */ #define SSCR1_RSRE (1 << 20) /* Receive Service Request Enable */ #define SSCR1_TINTE (1 << 19) /* Receiver Time-out Interrupt enable */ -#define SSCR1_PINTE (1 << 18) /* Peripheral Trailing Byte Interupt Enable */ +#define SSCR1_PINTE (1 << 18) /* Peripheral Trailing Byte Interrupt Enable */ #define SSCR1_IFS (1 << 16) /* Invert Frame Signal */ #define SSCR1_STRF (1 << 15) /* Select FIFO or EFWR */ #define SSCR1_EFWR (1 << 14) /* Enable FIFO Write/Read */ diff --git a/include/linux/raid/md_p.h b/include/linux/raid/md_p.h index ffa2efbbe382..75cbf4f62fe8 100644 --- a/include/linux/raid/md_p.h +++ b/include/linux/raid/md_p.h @@ -251,7 +251,7 @@ struct mdp_superblock_1 { __le64 utime; /* 40 bits second, 24 btes microseconds */ __le64 events; /* incremented when superblock updated */ __le64 resync_offset; /* data before this offset (from data_offset) known to be in sync */ - __le32 sb_csum; /* checksum upto devs[max_dev] */ + __le32 sb_csum; /* checksum up to devs[max_dev] */ __le32 max_dev; /* size of devs[] array to consider */ __u8 pad3[64-32]; /* set to 0 when writing */ diff --git a/include/linux/rbtree.h b/include/linux/rbtree.h index 7066acb2c530..033b507b33b1 100644 --- a/include/linux/rbtree.h +++ b/include/linux/rbtree.h @@ -136,6 +136,14 @@ static inline void rb_set_color(struct rb_node *rb, int color) #define RB_EMPTY_NODE(node) (rb_parent(node) == node) #define RB_CLEAR_NODE(node) (rb_set_parent(node, node)) +static inline void rb_init_node(struct rb_node *rb) +{ + rb->rb_parent_color = 0; + rb->rb_right = NULL; + rb->rb_left = NULL; + RB_CLEAR_NODE(rb); +} + extern void rb_insert_color(struct rb_node *, struct rb_root *); extern void rb_erase(struct rb_node *, struct rb_root *); diff --git a/include/linux/rculist.h b/include/linux/rculist.h index 2dea94fc4402..e3beb315517a 100644 --- a/include/linux/rculist.h +++ b/include/linux/rculist.h @@ -253,7 +253,7 @@ static inline void list_splice_init_rcu(struct list_head *list, */ #define list_for_each_entry_rcu(pos, head, member) \ for (pos = list_entry_rcu((head)->next, typeof(*pos), member); \ - prefetch(pos->member.next), &pos->member != (head); \ + &pos->member != (head); \ pos = list_entry_rcu(pos->member.next, typeof(*pos), member)) @@ -270,7 +270,7 @@ static inline void list_splice_init_rcu(struct list_head *list, */ #define list_for_each_continue_rcu(pos, head) \ for ((pos) = rcu_dereference_raw(list_next_rcu(pos)); \ - prefetch((pos)->next), (pos) != (head); \ + (pos) != (head); \ (pos) = rcu_dereference_raw(list_next_rcu(pos))) /** @@ -284,7 +284,7 @@ static inline void list_splice_init_rcu(struct list_head *list, */ #define list_for_each_entry_continue_rcu(pos, head, member) \ for (pos = list_entry_rcu(pos->member.next, typeof(*pos), member); \ - prefetch(pos->member.next), &pos->member != (head); \ + &pos->member != (head); \ pos = list_entry_rcu(pos->member.next, typeof(*pos), member)) /** @@ -427,7 +427,7 @@ static inline void hlist_add_after_rcu(struct hlist_node *prev, #define __hlist_for_each_rcu(pos, head) \ for (pos = rcu_dereference(hlist_first_rcu(head)); \ - pos && ({ prefetch(pos->next); 1; }); \ + pos; \ pos = rcu_dereference(hlist_next_rcu(pos))) /** @@ -443,7 +443,7 @@ static inline void hlist_add_after_rcu(struct hlist_node *prev, */ #define hlist_for_each_entry_rcu(tpos, pos, head, member) \ for (pos = rcu_dereference_raw(hlist_first_rcu(head)); \ - pos && ({ prefetch(pos->next); 1; }) && \ + pos && \ ({ tpos = hlist_entry(pos, typeof(*tpos), member); 1; }); \ pos = rcu_dereference_raw(hlist_next_rcu(pos))) @@ -460,7 +460,7 @@ static inline void hlist_add_after_rcu(struct hlist_node *prev, */ #define hlist_for_each_entry_rcu_bh(tpos, pos, head, member) \ for (pos = rcu_dereference_bh((head)->first); \ - pos && ({ prefetch(pos->next); 1; }) && \ + pos && \ ({ tpos = hlist_entry(pos, typeof(*tpos), member); 1; }); \ pos = rcu_dereference_bh(pos->next)) @@ -472,7 +472,7 @@ static inline void hlist_add_after_rcu(struct hlist_node *prev, */ #define hlist_for_each_entry_continue_rcu(tpos, pos, member) \ for (pos = rcu_dereference((pos)->next); \ - pos && ({ prefetch(pos->next); 1; }) && \ + pos && \ ({ tpos = hlist_entry(pos, typeof(*tpos), member); 1; }); \ pos = rcu_dereference(pos->next)) @@ -484,7 +484,7 @@ static inline void hlist_add_after_rcu(struct hlist_node *prev, */ #define hlist_for_each_entry_continue_rcu_bh(tpos, pos, member) \ for (pos = rcu_dereference_bh((pos)->next); \ - pos && ({ prefetch(pos->next); 1; }) && \ + pos && \ ({ tpos = hlist_entry(pos, typeof(*tpos), member); 1; }); \ pos = rcu_dereference_bh(pos->next)) diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h index af5614856285..99f9aa7c2804 100644 --- a/include/linux/rcupdate.h +++ b/include/linux/rcupdate.h @@ -47,6 +47,18 @@ extern int rcutorture_runnable; /* for sysctl */ #endif /* #ifdef CONFIG_RCU_TORTURE_TEST */ +#if defined(CONFIG_TREE_RCU) || defined(CONFIG_TREE_PREEMPT_RCU) +extern void rcutorture_record_test_transition(void); +extern void rcutorture_record_progress(unsigned long vernum); +#else +static inline void rcutorture_record_test_transition(void) +{ +} +static inline void rcutorture_record_progress(unsigned long vernum) +{ +} +#endif + #define UINT_CMP_GE(a, b) (UINT_MAX / 2 >= (a) - (b)) #define UINT_CMP_LT(a, b) (UINT_MAX / 2 < (a) - (b)) #define ULONG_CMP_GE(a, b) (ULONG_MAX / 2 >= (a) - (b)) @@ -68,7 +80,6 @@ extern void call_rcu_sched(struct rcu_head *head, extern void synchronize_sched(void); extern void rcu_barrier_bh(void); extern void rcu_barrier_sched(void); -extern int sched_expedited_torture_stats(char *page); static inline void __rcu_read_lock_bh(void) { @@ -339,6 +350,12 @@ extern int rcu_my_thread_group_empty(void); ((typeof(*p) __force __kernel *)(p)); \ }) +#define __rcu_access_index(p, space) \ + ({ \ + typeof(p) _________p1 = ACCESS_ONCE(p); \ + rcu_dereference_sparse(p, space); \ + (_________p1); \ + }) #define __rcu_dereference_index_check(p, c) \ ({ \ typeof(p) _________p1 = ACCESS_ONCE(p); \ @@ -429,6 +446,20 @@ extern int rcu_my_thread_group_empty(void); #define rcu_dereference_raw(p) rcu_dereference_check(p, 1) /*@@@ needed? @@@*/ /** + * rcu_access_index() - fetch RCU index with no dereferencing + * @p: The index to read + * + * Return the value of the specified RCU-protected index, but omit the + * smp_read_barrier_depends() and keep the ACCESS_ONCE(). This is useful + * when the value of this index is accessed, but the index is not + * dereferenced, for example, when testing an RCU-protected index against + * -1. Although rcu_access_index() may also be used in cases where + * update-side locks prevent the value of the index from changing, you + * should instead use rcu_dereference_index_protected() for this use case. + */ +#define rcu_access_index(p) __rcu_access_index((p), __rcu) + +/** * rcu_dereference_index_check() - rcu_dereference for indices with debug checking * @p: The pointer to read, prior to dereferencing * @c: The conditions under which the dereference will take place @@ -754,6 +785,7 @@ extern struct debug_obj_descr rcuhead_debug_descr; static inline void debug_rcu_head_queue(struct rcu_head *head) { + WARN_ON_ONCE((unsigned long)head & 0x3); debug_object_activate(head, &rcuhead_debug_descr); debug_object_active_state(head, &rcuhead_debug_descr, STATE_RCU_HEAD_READY, @@ -777,4 +809,60 @@ static inline void debug_rcu_head_unqueue(struct rcu_head *head) } #endif /* #else !CONFIG_DEBUG_OBJECTS_RCU_HEAD */ +static __always_inline bool __is_kfree_rcu_offset(unsigned long offset) +{ + return offset < 4096; +} + +static __always_inline +void __kfree_rcu(struct rcu_head *head, unsigned long offset) +{ + typedef void (*rcu_callback)(struct rcu_head *); + + BUILD_BUG_ON(!__builtin_constant_p(offset)); + + /* See the kfree_rcu() header comment. */ + BUILD_BUG_ON(!__is_kfree_rcu_offset(offset)); + + call_rcu(head, (rcu_callback)offset); +} + +extern void kfree(const void *); + +static inline void __rcu_reclaim(struct rcu_head *head) +{ + unsigned long offset = (unsigned long)head->func; + + if (__is_kfree_rcu_offset(offset)) + kfree((void *)head - offset); + else + head->func(head); +} + +/** + * kfree_rcu() - kfree an object after a grace period. + * @ptr: pointer to kfree + * @rcu_head: the name of the struct rcu_head within the type of @ptr. + * + * Many rcu callbacks functions just call kfree() on the base structure. + * These functions are trivial, but their size adds up, and furthermore + * when they are used in a kernel module, that module must invoke the + * high-latency rcu_barrier() function at module-unload time. + * + * The kfree_rcu() function handles this issue. Rather than encoding a + * function address in the embedded rcu_head structure, kfree_rcu() instead + * encodes the offset of the rcu_head structure within the base structure. + * Because the functions are not allowed in the low-order 4096 bytes of + * kernel virtual memory, offsets up to 4095 bytes can be accommodated. + * If the offset is larger than 4095 bytes, a compile-time error will + * be generated in __kfree_rcu(). If this error is triggered, you can + * either fall back to use of call_rcu() or rearrange the structure to + * position the rcu_head structure into the first 4096 bytes. + * + * Note that the allowable offset might decrease in the future, for example, + * to allow something like kmem_cache_free_rcu(). + */ +#define kfree_rcu(ptr, rcu_head) \ + __kfree_rcu(&((ptr)->rcu_head), offsetof(typeof(*(ptr)), rcu_head)) + #endif /* __LINUX_RCUPDATE_H */ diff --git a/include/linux/rcutiny.h b/include/linux/rcutiny.h index 30ebd7c8d874..52b3e0281fd0 100644 --- a/include/linux/rcutiny.h +++ b/include/linux/rcutiny.h @@ -100,6 +100,14 @@ static inline void rcu_note_context_switch(int cpu) } /* + * Take advantage of the fact that there is only one CPU, which + * allows us to ignore virtualization-based context switches. + */ +static inline void rcu_virt_note_context_switch(int cpu) +{ +} + +/* * Return the number of grace periods. */ static inline long rcu_batches_completed(void) diff --git a/include/linux/rcutree.h b/include/linux/rcutree.h index 3a933482734a..e65d06634dd8 100644 --- a/include/linux/rcutree.h +++ b/include/linux/rcutree.h @@ -35,6 +35,16 @@ extern void rcu_note_context_switch(int cpu); extern int rcu_needs_cpu(int cpu); extern void rcu_cpu_stall_reset(void); +/* + * Note a virtualization-based context switch. This is simply a + * wrapper around rcu_note_context_switch(), which allows TINY_RCU + * to save a few bytes. + */ +static inline void rcu_virt_note_context_switch(int cpu) +{ + rcu_note_context_switch(cpu); +} + #ifdef CONFIG_TREE_PREEMPT_RCU extern void exit_rcu(void); @@ -58,9 +68,12 @@ static inline void synchronize_rcu_bh_expedited(void) extern void rcu_barrier(void); +extern unsigned long rcutorture_testseq; +extern unsigned long rcutorture_vernum; extern long rcu_batches_completed(void); extern long rcu_batches_completed_bh(void); extern long rcu_batches_completed_sched(void); + extern void rcu_force_quiescent_state(void); extern void rcu_bh_force_quiescent_state(void); extern void rcu_sched_force_quiescent_state(void); diff --git a/include/linux/regulator/ab8500.h b/include/linux/regulator/ab8500.h index 6a210f1511fc..76579f964a29 100644 --- a/include/linux/regulator/ab8500.h +++ b/include/linux/regulator/ab8500.h @@ -3,8 +3,8 @@ * * License Terms: GNU General Public License v2 * - * Author: Sundar Iyer <sundar.iyer@stericsson.com> for ST-Ericsson - * + * Authors: Sundar Iyer <sundar.iyer@stericsson.com> for ST-Ericsson + * Bengt Jonsson <bengt.g.jonsson@stericsson.com> for ST-Ericsson */ #ifndef __LINUX_MFD_AB8500_REGULATOR_H @@ -17,6 +17,7 @@ enum ab8500_regulator_id { AB8500_LDO_AUX3, AB8500_LDO_INTCORE, AB8500_LDO_TVOUT, + AB8500_LDO_USB, AB8500_LDO_AUDIO, AB8500_LDO_ANAMIC1, AB8500_LDO_ANAMIC2, @@ -24,4 +25,50 @@ enum ab8500_regulator_id { AB8500_LDO_ANA, AB8500_NUM_REGULATORS, }; + +/* AB8500 register initialization */ +struct ab8500_regulator_reg_init { + int id; + u8 value; +}; + +#define INIT_REGULATOR_REGISTER(_id, _value) \ + { \ + .id = _id, \ + .value = _value, \ + } + +/* AB8500 registers */ +enum ab8500_regulator_reg { + AB8500_REGUREQUESTCTRL2, + AB8500_REGUREQUESTCTRL3, + AB8500_REGUREQUESTCTRL4, + AB8500_REGUSYSCLKREQ1HPVALID1, + AB8500_REGUSYSCLKREQ1HPVALID2, + AB8500_REGUHWHPREQ1VALID1, + AB8500_REGUHWHPREQ1VALID2, + AB8500_REGUHWHPREQ2VALID1, + AB8500_REGUHWHPREQ2VALID2, + AB8500_REGUSWHPREQVALID1, + AB8500_REGUSWHPREQVALID2, + AB8500_REGUSYSCLKREQVALID1, + AB8500_REGUSYSCLKREQVALID2, + AB8500_REGUMISC1, + AB8500_VAUDIOSUPPLY, + AB8500_REGUCTRL1VAMIC, + AB8500_VPLLVANAREGU, + AB8500_VREFDDR, + AB8500_EXTSUPPLYREGU, + AB8500_VAUX12REGU, + AB8500_VRF1VAUX3REGU, + AB8500_VAUX1SEL, + AB8500_VAUX2SEL, + AB8500_VRF1VAUX3SEL, + AB8500_REGUCTRL2SPARE, + AB8500_REGUCTRLDISCH, + AB8500_REGUCTRLDISCH2, + AB8500_VSMPS1SEL1, + AB8500_NUM_REGULATOR_REGISTERS, +}; + #endif diff --git a/include/linux/regulator/consumer.h b/include/linux/regulator/consumer.h index 7954f6bd7edb..9e87c1cb7270 100644 --- a/include/linux/regulator/consumer.h +++ b/include/linux/regulator/consumer.h @@ -153,6 +153,8 @@ int regulator_list_voltage(struct regulator *regulator, unsigned selector); int regulator_is_supported_voltage(struct regulator *regulator, int min_uV, int max_uV); int regulator_set_voltage(struct regulator *regulator, int min_uV, int max_uV); +int regulator_set_voltage_time(struct regulator *regulator, + int old_uV, int new_uV); int regulator_get_voltage(struct regulator *regulator); int regulator_sync_voltage(struct regulator *regulator); int regulator_set_current_limit(struct regulator *regulator, diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index b8ed16a33c47..6c433b89c80d 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -63,7 +63,11 @@ enum regulator_status { * when running with the specified parameters. * * @enable_time: Time taken for the regulator voltage output voltage to - * stabalise after being enabled, in microseconds. + * stabilise after being enabled, in microseconds. + * @set_voltage_time_sel: Time taken for the regulator voltage output voltage + * to stabilise after being set to a new value, in microseconds. + * The function provides the from and to voltage selector, the + * function should return the worst case. * * @set_suspend_voltage: Set the voltage for the regulator when the system * is suspended. @@ -103,8 +107,11 @@ struct regulator_ops { int (*set_mode) (struct regulator_dev *, unsigned int mode); unsigned int (*get_mode) (struct regulator_dev *); - /* Time taken to enable the regulator */ + /* Time taken to enable or set voltage on the regulator */ int (*enable_time) (struct regulator_dev *); + int (*set_voltage_time_sel) (struct regulator_dev *, + unsigned int old_selector, + unsigned int new_selector); /* report regulator status ... most other accessors report * control inputs, this reports results of combining inputs diff --git a/include/linux/regulator/machine.h b/include/linux/regulator/machine.h index 761c745b9c24..c4c4fc45f856 100644 --- a/include/linux/regulator/machine.h +++ b/include/linux/regulator/machine.h @@ -186,6 +186,7 @@ struct regulator_init_data { }; int regulator_suspend_prepare(suspend_state_t state); +int regulator_suspend_finish(void); #ifdef CONFIG_REGULATOR void regulator_has_full_constraints(void); diff --git a/include/linux/reiserfs_fs.h b/include/linux/reiserfs_fs.h index 0a3842aacba9..eca75df00fed 100644 --- a/include/linux/reiserfs_fs.h +++ b/include/linux/reiserfs_fs.h @@ -1557,7 +1557,7 @@ struct tree_balance { /* When inserting an item. */ #define M_INSERT 'i' /* When inserting into (directories only) or appending onto an already - existant item. */ + existent item. */ #define M_PASTE 'p' /* When deleting an item. */ #define M_DELETE 'd' diff --git a/include/linux/rfkill-regulator.h b/include/linux/rfkill-regulator.h new file mode 100644 index 000000000000..aca36bc83315 --- /dev/null +++ b/include/linux/rfkill-regulator.h @@ -0,0 +1,48 @@ +/* + * rfkill-regulator.c - Regulator consumer driver for rfkill + * + * Copyright (C) 2009 Guiming Zhuo <gmzhuo@gmail.com> + * Copyright (C) 2011 Antonio Ospite <ospite@studenti.unina.it> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef __LINUX_RFKILL_REGULATOR_H +#define __LINUX_RFKILL_REGULATOR_H + +/* + * Use "vrfkill" as supply id when declaring the regulator consumer: + * + * static struct regulator_consumer_supply pcap_regulator_V6_consumers [] = { + * { .dev_name = "rfkill-regulator.0", .supply = "vrfkill" }, + * }; + * + * If you have several regulator driven rfkill, you can append a numerical id to + * .dev_name as done above, and use the same id when declaring the platform + * device: + * + * static struct rfkill_regulator_platform_data ezx_rfkill_bt_data = { + * .name = "ezx-bluetooth", + * .type = RFKILL_TYPE_BLUETOOTH, + * }; + * + * static struct platform_device a910_rfkill = { + * .name = "rfkill-regulator", + * .id = 0, + * .dev = { + * .platform_data = &ezx_rfkill_bt_data, + * }, + * }; + */ + +#include <linux/rfkill.h> + +struct rfkill_regulator_platform_data { + char *name; /* the name for the rfkill switch */ + enum rfkill_type type; /* the type as specified in rfkill.h */ +}; + +#endif /* __LINUX_RFKILL_REGULATOR_H */ diff --git a/include/linux/rio.h b/include/linux/rio.h index 4e37a7cfa726..4d50611112ba 100644 --- a/include/linux/rio.h +++ b/include/linux/rio.h @@ -396,7 +396,7 @@ union rio_pw_msg { }; /* Architecture and hardware-specific functions */ -extern void rio_register_mport(struct rio_mport *); +extern int rio_register_mport(struct rio_mport *); extern int rio_open_inb_mbox(struct rio_mport *, void *, int, int); extern void rio_close_inb_mbox(struct rio_mport *, int); extern int rio_open_outb_mbox(struct rio_mport *, void *, int, int); diff --git a/include/linux/rio_ids.h b/include/linux/rio_ids.h index 7410d3365e2a..0cee0152aca9 100644 --- a/include/linux/rio_ids.h +++ b/include/linux/rio_ids.h @@ -35,6 +35,7 @@ #define RIO_DID_IDTCPS6Q 0x035f #define RIO_DID_IDTCPS10Q 0x035e #define RIO_DID_IDTCPS1848 0x0374 +#define RIO_DID_IDTCPS1432 0x0375 #define RIO_DID_IDTCPS1616 0x0379 #define RIO_DID_IDTVPS1616 0x0377 #define RIO_DID_IDTSPS1616 0x0378 diff --git a/include/linux/rtc.h b/include/linux/rtc.h index 2ca7e8a78060..877ece45426f 100644 --- a/include/linux/rtc.h +++ b/include/linux/rtc.h @@ -228,6 +228,8 @@ extern int rtc_read_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alrm); extern int rtc_set_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alrm); +extern int rtc_initialize_alarm(struct rtc_device *rtc, + struct rtc_wkalrm *alrm); extern void rtc_update_irq(struct rtc_device *rtc, unsigned long num, unsigned long events); diff --git a/include/linux/sched.h b/include/linux/sched.h index 83bd2e2982fc..885c4f242ad7 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -360,7 +360,7 @@ extern signed long schedule_timeout_interruptible(signed long timeout); extern signed long schedule_timeout_killable(signed long timeout); extern signed long schedule_timeout_uninterruptible(signed long timeout); asmlinkage void schedule(void); -extern int mutex_spin_on_owner(struct mutex *lock, struct thread_info *owner); +extern int mutex_spin_on_owner(struct mutex *lock, struct task_struct *owner); struct nsproxy; struct user_namespace; @@ -653,9 +653,8 @@ struct signal_struct { * Bits in flags field of signal_struct. */ #define SIGNAL_STOP_STOPPED 0x00000001 /* job control stop in effect */ -#define SIGNAL_STOP_DEQUEUED 0x00000002 /* stop signal dequeued */ -#define SIGNAL_STOP_CONTINUED 0x00000004 /* SIGCONT since WCONTINUED reap */ -#define SIGNAL_GROUP_EXIT 0x00000008 /* group exit in progress */ +#define SIGNAL_STOP_CONTINUED 0x00000002 /* SIGCONT since WCONTINUED reap */ +#define SIGNAL_GROUP_EXIT 0x00000004 /* group exit in progress */ /* * Pending notifications to parent. */ @@ -731,10 +730,6 @@ struct sched_info { /* timestamps */ unsigned long long last_arrival,/* when we last ran on a cpu */ last_queued; /* when we were last queued to run */ -#ifdef CONFIG_SCHEDSTATS - /* BKL stats */ - unsigned int bkl_count; -#endif }; #endif /* defined(CONFIG_SCHEDSTATS) || defined(CONFIG_TASK_DELAY_ACCT) */ @@ -854,7 +849,7 @@ extern int __weak arch_sd_sibiling_asym_packing(void); /* * Optimise SD flags for power savings: - * SD_BALANCE_NEWIDLE helps agressive task consolidation and power savings. + * SD_BALANCE_NEWIDLE helps aggressive task consolidation and power savings. * Keep default SD flags if sched_{smt,mc}_power_saving=0 */ @@ -868,6 +863,7 @@ static inline int sd_power_saving_flags(void) struct sched_group { struct sched_group *next; /* Must be a circular list */ + atomic_t ref; /* * CPU power of this group, SCHED_LOAD_SCALE being max power for a @@ -882,9 +878,6 @@ struct sched_group { * NOTE: this field is variable length. (Allocated dynamically * by attaching extra space to the end of the structure, * depending on how many CPUs the kernel has booted up with) - * - * It is also be embedded into static data structures at build - * time. (See 'struct static_sched_group' in kernel/sched.c) */ unsigned long cpumask[0]; }; @@ -894,17 +887,6 @@ static inline struct cpumask *sched_group_cpus(struct sched_group *sg) return to_cpumask(sg->cpumask); } -enum sched_domain_level { - SD_LV_NONE = 0, - SD_LV_SIBLING, - SD_LV_MC, - SD_LV_BOOK, - SD_LV_CPU, - SD_LV_NODE, - SD_LV_ALLNODES, - SD_LV_MAX -}; - struct sched_domain_attr { int relax_domain_level; }; @@ -913,6 +895,8 @@ struct sched_domain_attr { .relax_domain_level = -1, \ } +extern int sched_domain_level_max; + struct sched_domain { /* These fields must be setup */ struct sched_domain *parent; /* top domain must be null terminated */ @@ -930,7 +914,7 @@ struct sched_domain { unsigned int forkexec_idx; unsigned int smt_gain; int flags; /* See SD_* */ - enum sched_domain_level level; + int level; /* Runtime fields. */ unsigned long last_balance; /* init to jiffies. units in jiffies */ @@ -973,6 +957,10 @@ struct sched_domain { #ifdef CONFIG_SCHED_DEBUG char *name; #endif + union { + void *private; /* used during construction */ + struct rcu_head rcu; /* used during destruction */ + }; unsigned int span_weight; /* @@ -981,9 +969,6 @@ struct sched_domain { * NOTE: this field is variable length. (Allocated dynamically * by attaching extra space to the end of the structure, * depending on how many CPUs the kernel has booted up with) - * - * It is also be embedded into static data structures at build - * time. (See 'struct static_sched_domain' in kernel/sched.c) */ unsigned long span[0]; }; @@ -1048,8 +1033,12 @@ struct sched_domain; #define WF_FORK 0x02 /* child wakeup after fork */ #define ENQUEUE_WAKEUP 1 -#define ENQUEUE_WAKING 2 -#define ENQUEUE_HEAD 4 +#define ENQUEUE_HEAD 2 +#ifdef CONFIG_SMP +#define ENQUEUE_WAKING 4 /* sched_class::task_waking was called */ +#else +#define ENQUEUE_WAKING 0 +#endif #define DEQUEUE_SLEEP 1 @@ -1067,12 +1056,11 @@ struct sched_class { void (*put_prev_task) (struct rq *rq, struct task_struct *p); #ifdef CONFIG_SMP - int (*select_task_rq)(struct rq *rq, struct task_struct *p, - int sd_flag, int flags); + int (*select_task_rq)(struct task_struct *p, int sd_flag, int flags); void (*pre_schedule) (struct rq *this_rq, struct task_struct *task); void (*post_schedule) (struct rq *this_rq); - void (*task_waking) (struct rq *this_rq, struct task_struct *task); + void (*task_waking) (struct task_struct *task); void (*task_woken) (struct rq *this_rq, struct task_struct *task); void (*set_cpus_allowed)(struct task_struct *p, @@ -1197,13 +1185,11 @@ struct task_struct { unsigned int flags; /* per process flags, defined below */ unsigned int ptrace; - int lock_depth; /* BKL lock depth */ - #ifdef CONFIG_SMP -#ifdef __ARCH_WANT_UNLOCKED_CTXSW - int oncpu; -#endif + struct task_struct *wake_entry; + int on_cpu; #endif + int on_rq; int prio, static_prio, normal_prio; unsigned int rt_priority; @@ -1254,6 +1240,9 @@ struct task_struct { #endif struct mm_struct *mm, *active_mm; +#ifdef CONFIG_COMPAT_BRK + unsigned brk_randomized:1; +#endif #if defined(SPLIT_RSS_COUNTING) struct task_rss_stat rss_stat; #endif @@ -1261,6 +1250,7 @@ struct task_struct { int exit_state; int exit_code, exit_signal; int pdeath_signal; /* The signal sent when the parent dies */ + unsigned int group_stop; /* GROUP_STOP_*, siglock protected */ /* ??? */ unsigned int personality; unsigned did_exec:1; @@ -1271,6 +1261,7 @@ struct task_struct { /* Revert to default priority/policy when forking */ unsigned sched_reset_on_fork:1; + unsigned sched_contributes_to_load:1; pid_t pid; pid_t tgid; @@ -1534,6 +1525,9 @@ struct task_struct { unsigned long memsw_nr_pages; /* uncharged mem+swap usage */ } memcg_batch; #endif +#ifdef CONFIG_HAVE_HW_BREAKPOINT + atomic_t ptrace_bp_refcnt; +#endif }; /* Future-safe accessor for struct task_struct's cpus_allowed. */ @@ -1777,6 +1771,17 @@ extern void thread_group_times(struct task_struct *p, cputime_t *ut, cputime_t * #define tsk_used_math(p) ((p)->flags & PF_USED_MATH) #define used_math() tsk_used_math(current) +/* + * task->group_stop flags + */ +#define GROUP_STOP_SIGMASK 0xffff /* signr of the last group stop */ +#define GROUP_STOP_PENDING (1 << 16) /* task should stop for group stop */ +#define GROUP_STOP_CONSUME (1 << 17) /* consume group stop count */ +#define GROUP_STOP_TRAPPING (1 << 18) /* switching from STOPPED to TRACED */ +#define GROUP_STOP_DEQUEUED (1 << 19) /* stop signal dequeued */ + +extern void task_clear_group_stop_pending(struct task_struct *task); + #ifdef CONFIG_PREEMPT_RCU #define RCU_READ_UNLOCK_BLOCKED (1 << 0) /* blocked while in RCU read-side. */ @@ -2057,14 +2062,13 @@ extern void xtime_update(unsigned long ticks); extern int wake_up_state(struct task_struct *tsk, unsigned int state); extern int wake_up_process(struct task_struct *tsk); -extern void wake_up_new_task(struct task_struct *tsk, - unsigned long clone_flags); +extern void wake_up_new_task(struct task_struct *tsk); #ifdef CONFIG_SMP extern void kick_process(struct task_struct *tsk); #else static inline void kick_process(struct task_struct *tsk) { } #endif -extern void sched_fork(struct task_struct *p, int clone_flags); +extern void sched_fork(struct task_struct *p); extern void sched_dead(struct task_struct *p); extern void proc_caches_init(void); @@ -2189,8 +2193,10 @@ extern void set_task_comm(struct task_struct *tsk, char *from); extern char *get_task_comm(char *to, struct task_struct *tsk); #ifdef CONFIG_SMP +void scheduler_ipi(void); extern unsigned long wait_task_inactive(struct task_struct *, long match_state); #else +static inline void scheduler_ipi(void) { } static inline unsigned long wait_task_inactive(struct task_struct *p, long match_state) { diff --git a/include/linux/security.h b/include/linux/security.h index ca02f1716736..8ce59ef3e5af 100644 --- a/include/linux/security.h +++ b/include/linux/security.h @@ -1456,7 +1456,7 @@ struct security_operations { struct inode *new_dir, struct dentry *new_dentry); int (*inode_readlink) (struct dentry *dentry); int (*inode_follow_link) (struct dentry *dentry, struct nameidata *nd); - int (*inode_permission) (struct inode *inode, int mask); + int (*inode_permission) (struct inode *inode, int mask, unsigned flags); int (*inode_setattr) (struct dentry *dentry, struct iattr *attr); int (*inode_getattr) (struct vfsmount *mnt, struct dentry *dentry); int (*inode_setxattr) (struct dentry *dentry, const char *name, diff --git a/include/linux/seqlock.h b/include/linux/seqlock.h index e98cd2e57194..06d69648fc86 100644 --- a/include/linux/seqlock.h +++ b/include/linux/seqlock.h @@ -88,12 +88,12 @@ static __always_inline unsigned read_seqbegin(const seqlock_t *sl) unsigned ret; repeat: - ret = sl->sequence; - smp_rmb(); + ret = ACCESS_ONCE(sl->sequence); if (unlikely(ret & 1)) { cpu_relax(); goto repeat; } + smp_rmb(); return ret; } diff --git a/include/linux/signal.h b/include/linux/signal.h index fcd2b14b1932..a822300a253b 100644 --- a/include/linux/signal.h +++ b/include/linux/signal.h @@ -7,6 +7,8 @@ #ifdef __KERNEL__ #include <linux/list.h> +struct task_struct; + /* for sysctl */ extern int print_fatal_signals; /* @@ -123,13 +125,13 @@ _SIG_SET_BINOP(sigorsets, _sig_or) #define _sig_and(x,y) ((x) & (y)) _SIG_SET_BINOP(sigandsets, _sig_and) -#define _sig_nand(x,y) ((x) & ~(y)) -_SIG_SET_BINOP(signandsets, _sig_nand) +#define _sig_andn(x,y) ((x) & ~(y)) +_SIG_SET_BINOP(sigandnsets, _sig_andn) #undef _SIG_SET_BINOP #undef _sig_or #undef _sig_and -#undef _sig_nand +#undef _sig_andn #define _SIG_SET_OP(name, op) \ static inline void name(sigset_t *set) \ @@ -234,6 +236,9 @@ static inline int valid_signal(unsigned long sig) return sig <= _NSIG ? 1 : 0; } +struct timespec; +struct pt_regs; + extern int next_signal(struct sigpending *pending, sigset_t *mask); extern int do_send_sig_info(int sig, struct siginfo *info, struct task_struct *p, bool group); @@ -242,10 +247,12 @@ extern int __group_send_sig_info(int, struct siginfo *, struct task_struct *); extern long do_rt_tgsigqueueinfo(pid_t tgid, pid_t pid, int sig, siginfo_t *info); extern long do_sigpending(void __user *, unsigned long); +extern int do_sigtimedwait(const sigset_t *, siginfo_t *, + const struct timespec *); extern int sigprocmask(int, sigset_t *, sigset_t *); +extern void set_current_blocked(const sigset_t *); extern int show_unhandled_signals; -struct pt_regs; extern int get_signal_to_deliver(siginfo_t *info, struct k_sigaction *return_ka, struct pt_regs *regs, void *cookie); extern void exit_signals(struct task_struct *tsk); diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 24cfa626931e..79aafbbf430a 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -122,8 +122,14 @@ struct sk_buff_head { struct sk_buff; -/* To allow 64K frame to be packed as single skb without frag_list */ +/* To allow 64K frame to be packed as single skb without frag_list. Since + * GRO uses frags we allocate at least 16 regardless of page size. + */ +#if (65536/PAGE_SIZE + 2) < 16 +#define MAX_SKB_FRAGS 16UL +#else #define MAX_SKB_FRAGS (65536/PAGE_SIZE + 2) +#endif typedef struct skb_frag_struct skb_frag_t; @@ -385,8 +391,8 @@ struct sk_buff { __u32 rxhash; + __u16 queue_mapping; kmemcheck_bitfield_begin(flags2); - __u16 queue_mapping:16; #ifdef CONFIG_IPV6_NDISC_NODETYPE __u8 ndisc_nodetype:2; #endif @@ -468,7 +474,7 @@ static inline void skb_dst_set(struct sk_buff *skb, struct dst_entry *dst) extern void skb_dst_set_noref(struct sk_buff *skb, struct dst_entry *dst); /** - * skb_dst_is_noref - Test if skb dst isnt refcounted + * skb_dst_is_noref - Test if skb dst isn't refcounted * @skb: buffer */ static inline bool skb_dst_is_noref(const struct sk_buff *skb) diff --git a/include/linux/smc91x.h b/include/linux/smc91x.h index bc21db598c06..76199b75d584 100644 --- a/include/linux/smc91x.h +++ b/include/linux/smc91x.h @@ -21,7 +21,7 @@ #define RPC_LED_10 (0x02) /* LED = 10Mbps link detect */ #define RPC_LED_FD (0x03) /* LED = Full Duplex Mode */ #define RPC_LED_TX_RX (0x04) /* LED = TX or RX packet occurred */ -#define RPC_LED_100 (0x05) /* LED = 100Mbps link dectect */ +#define RPC_LED_100 (0x05) /* LED = 100Mbps link detect */ #define RPC_LED_TX (0x06) /* LED = TX packet occurred */ #define RPC_LED_RX (0x07) /* LED = RX packet occurred */ diff --git a/include/linux/smsc911x.h b/include/linux/smsc911x.h index 7144e8aa1e41..4dde70e74822 100644 --- a/include/linux/smsc911x.h +++ b/include/linux/smsc911x.h @@ -29,6 +29,7 @@ struct smsc911x_platform_config { unsigned int irq_polarity; unsigned int irq_type; unsigned int flags; + unsigned int shift; phy_interface_t phy_interface; unsigned char mac[6]; }; diff --git a/include/linux/socket.h b/include/linux/socket.h index edbb1d07ddf4..4ef98e422fde 100644 --- a/include/linux/socket.h +++ b/include/linux/socket.h @@ -88,7 +88,7 @@ struct cmsghdr { }; /* - * Ancilliary data object information MACROS + * Ancillary data object information MACROS * Table 5-14 of POSIX 1003.1g */ @@ -333,5 +333,7 @@ struct timespec; extern int __sys_recvmmsg(int fd, struct mmsghdr __user *mmsg, unsigned int vlen, unsigned int flags, struct timespec *timeout); +extern int __sys_sendmmsg(int fd, struct mmsghdr __user *mmsg, + unsigned int vlen, unsigned int flags); #endif /* not kernel and not glibc */ #endif /* _LINUX_SOCKET_H */ diff --git a/include/linux/sonypi.h b/include/linux/sonypi.h index 0e6dc3891942..c0f87da78f8a 100644 --- a/include/linux/sonypi.h +++ b/include/linux/sonypi.h @@ -40,6 +40,7 @@ /* events the user application reading /dev/sonypi can use */ +#define SONYPI_EVENT_IGNORE 0 #define SONYPI_EVENT_JOGDIAL_DOWN 1 #define SONYPI_EVENT_JOGDIAL_UP 2 #define SONYPI_EVENT_JOGDIAL_DOWN_PRESSED 3 diff --git a/include/linux/soundcard.h b/include/linux/soundcard.h index 1904afedb82f..fe204fe39f7c 100644 --- a/include/linux/soundcard.h +++ b/include/linux/soundcard.h @@ -1231,7 +1231,7 @@ void seqbuf_dump(void); /* This function must be provided by programs */ #define SEQ_PANNING(dev, voice, pos) SEQ_CONTROL(dev, voice, CTL_PAN, (pos+128) / 2) /* - * Timing and syncronization macros + * Timing and synchronization macros */ #define _TIMER_EVENT(ev, parm) {_SEQ_NEEDBUF(8);\ diff --git a/include/linux/spi/spidev.h b/include/linux/spi/spidev.h index bf0570a84f7a..52d9ed01855f 100644 --- a/include/linux/spi/spidev.h +++ b/include/linux/spi/spidev.h @@ -66,7 +66,7 @@ * are in a different address space (and may be of different sizes in some * cases, such as 32-bit i386 userspace over a 64-bit x86_64 kernel). * Zero-initialize the structure, including currently unused fields, to - * accomodate potential future updates. + * accommodate potential future updates. * * SPI_IOC_MESSAGE gives userspace the equivalent of kernel spi_sync(). * Pass it an array of related transfers, they'll execute together. diff --git a/include/linux/spinlock.h b/include/linux/spinlock.h index 80e535897de6..0b22d51258e6 100644 --- a/include/linux/spinlock.h +++ b/include/linux/spinlock.h @@ -81,7 +81,7 @@ #include <linux/spinlock_types.h> /* - * Pull the arch_spin*() functions/declarations (UP-nondebug doesnt need them): + * Pull the arch_spin*() functions/declarations (UP-nondebug doesn't need them): */ #ifdef CONFIG_SMP # include <asm/spinlock.h> diff --git a/include/linux/spinlock_up.h b/include/linux/spinlock_up.h index b14f6a91e19f..a26e2fb604e6 100644 --- a/include/linux/spinlock_up.h +++ b/include/linux/spinlock_up.h @@ -5,6 +5,8 @@ # error "please don't include this file directly" #endif +#include <asm/processor.h> /* for cpu_relax() */ + /* * include/linux/spinlock_up.h - UP-debug version of spinlocks. * diff --git a/include/linux/ssb/ssb.h b/include/linux/ssb/ssb.h index 9659eff52ca2..252e44821787 100644 --- a/include/linux/ssb/ssb.h +++ b/include/linux/ssb/ssb.h @@ -308,7 +308,7 @@ struct ssb_bus { /* ID information about the Chip. */ u16 chip_id; - u16 chip_rev; + u8 chip_rev; u16 sprom_offset; u16 sprom_size; /* number of words in sprom */ u8 chip_package; @@ -404,7 +404,9 @@ extern bool ssb_is_sprom_available(struct ssb_bus *bus); /* Set a fallback SPROM. * See kdoc at the function definition for complete documentation. */ -extern int ssb_arch_set_fallback_sprom(const struct ssb_sprom *sprom); +extern int ssb_arch_register_fallback_sprom( + int (*sprom_callback)(struct ssb_bus *bus, + struct ssb_sprom *out)); /* Suspend a SSB bus. * Call this from the parent bus suspend routine. */ @@ -518,6 +520,7 @@ extern int ssb_bus_may_powerdown(struct ssb_bus *bus); * Otherwise static always-on powercontrol will be used. */ extern int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl); +extern void ssb_commit_settings(struct ssb_bus *bus); /* Various helper functions */ extern u32 ssb_admatch_base(u32 adm); diff --git a/include/linux/ssb/ssb_driver_chipcommon.h b/include/linux/ssb/ssb_driver_chipcommon.h index 2cdf249b4e5f..a08d693d8324 100644 --- a/include/linux/ssb/ssb_driver_chipcommon.h +++ b/include/linux/ssb/ssb_driver_chipcommon.h @@ -123,6 +123,8 @@ #define SSB_CHIPCO_FLASHDATA 0x0048 #define SSB_CHIPCO_BCAST_ADDR 0x0050 #define SSB_CHIPCO_BCAST_DATA 0x0054 +#define SSB_CHIPCO_GPIOPULLUP 0x0058 /* Rev >= 20 only */ +#define SSB_CHIPCO_GPIOPULLDOWN 0x005C /* Rev >= 20 only */ #define SSB_CHIPCO_GPIOIN 0x0060 #define SSB_CHIPCO_GPIOOUT 0x0064 #define SSB_CHIPCO_GPIOOUTEN 0x0068 @@ -131,6 +133,9 @@ #define SSB_CHIPCO_GPIOIRQ 0x0074 #define SSB_CHIPCO_WATCHDOG 0x0080 #define SSB_CHIPCO_GPIOTIMER 0x0088 /* LED powersave (corerev >= 16) */ +#define SSB_CHIPCO_GPIOTIMER_OFFTIME 0x0000FFFF +#define SSB_CHIPCO_GPIOTIMER_OFFTIME_SHIFT 0 +#define SSB_CHIPCO_GPIOTIMER_ONTIME 0xFFFF0000 #define SSB_CHIPCO_GPIOTIMER_ONTIME_SHIFT 16 #define SSB_CHIPCO_GPIOTOUTM 0x008C /* LED powersave (corerev >= 16) */ #define SSB_CHIPCO_CLOCK_N 0x0090 @@ -189,8 +194,10 @@ #define SSB_CHIPCO_CLKCTLST_HAVEALPREQ 0x00000008 /* ALP available request */ #define SSB_CHIPCO_CLKCTLST_HAVEHTREQ 0x00000010 /* HT available request */ #define SSB_CHIPCO_CLKCTLST_HWCROFF 0x00000020 /* Force HW clock request off */ -#define SSB_CHIPCO_CLKCTLST_HAVEHT 0x00010000 /* HT available */ -#define SSB_CHIPCO_CLKCTLST_HAVEALP 0x00020000 /* APL available */ +#define SSB_CHIPCO_CLKCTLST_HAVEALP 0x00010000 /* ALP available */ +#define SSB_CHIPCO_CLKCTLST_HAVEHT 0x00020000 /* HT available */ +#define SSB_CHIPCO_CLKCTLST_4328A0_HAVEHT 0x00010000 /* 4328a0 has reversed bits */ +#define SSB_CHIPCO_CLKCTLST_4328A0_HAVEALP 0x00020000 /* 4328a0 has reversed bits */ #define SSB_CHIPCO_HW_WORKAROUND 0x01E4 /* Hardware workaround (rev >= 20) */ #define SSB_CHIPCO_UART0_DATA 0x0300 #define SSB_CHIPCO_UART0_IMR 0x0304 diff --git a/include/linux/ssb/ssb_regs.h b/include/linux/ssb/ssb_regs.h index 402955ae48ce..efbf459d571c 100644 --- a/include/linux/ssb/ssb_regs.h +++ b/include/linux/ssb/ssb_regs.h @@ -97,7 +97,7 @@ #define SSB_INTVEC_ENET1 0x00000040 /* Enable interrupts for enet 1 */ #define SSB_TMSLOW 0x0F98 /* SB Target State Low */ #define SSB_TMSLOW_RESET 0x00000001 /* Reset */ -#define SSB_TMSLOW_REJECT_22 0x00000002 /* Reject (Backplane rev 2.2) */ +#define SSB_TMSLOW_REJECT 0x00000002 /* Reject (Standard Backplane) */ #define SSB_TMSLOW_REJECT_23 0x00000004 /* Reject (Backplane rev 2.3) */ #define SSB_TMSLOW_CLOCK 0x00010000 /* Clock Enable */ #define SSB_TMSLOW_FGC 0x00020000 /* Force Gated Clocks On */ diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h index e10352915698..9529e49b0385 100644 --- a/include/linux/stmmac.h +++ b/include/linux/stmmac.h @@ -26,7 +26,9 @@ #ifndef __STMMAC_PLATFORM_DATA #define __STMMAC_PLATFORM_DATA -/* platfrom data for platfrom device structure's platfrom_data field */ +#include <linux/platform_device.h> + +/* platform data for platform device structure's platform_data field */ /* Private data for the STM on-board ethernet driver */ struct plat_stmmacenet_data { diff --git a/include/linux/stop_machine.h b/include/linux/stop_machine.h index 1808960c5059..092dc9b1ce7d 100644 --- a/include/linux/stop_machine.h +++ b/include/linux/stop_machine.h @@ -105,7 +105,7 @@ static inline int try_stop_cpus(const struct cpumask *cpumask, * @cpus: the cpus to run the @fn() on (NULL = any online cpu) * * Description: This causes a thread to be scheduled on every cpu, - * each of which disables interrupts. The result is that noone is + * each of which disables interrupts. The result is that no one is * holding a spinlock or inside any other preempt-disabled region when * @fn() runs. * diff --git a/include/linux/string.h b/include/linux/string.h index a716ee2a8adb..a176db2f2c85 100644 --- a/include/linux/string.h +++ b/include/linux/string.h @@ -123,6 +123,7 @@ extern char **argv_split(gfp_t gfp, const char *str, int *argcp); extern void argv_free(char **argv); extern bool sysfs_streq(const char *s1, const char *s2); +extern int strtobool(const char *s, bool *res); #ifdef CONFIG_BINARY_PRINTF int vbin_printf(u32 *bin_buf, size_t size, const char *fmt, va_list args); diff --git a/include/linux/sunrpc/cache.h b/include/linux/sunrpc/cache.h index 7898ea13de70..8d2eef1a8582 100644 --- a/include/linux/sunrpc/cache.h +++ b/include/linux/sunrpc/cache.h @@ -35,10 +35,10 @@ * Each cache must be registered so that it can be cleaned regularly. * When the cache is unregistered, it is flushed completely. * - * Entries have a ref count and a 'hashed' flag which counts the existance + * Entries have a ref count and a 'hashed' flag which counts the existence * in the hash table. * We only expire entries when refcount is zero. - * Existance in the cache is counted the refcount. + * Existence in the cache is counted the refcount. */ /* Every cache item has a common header that is used diff --git a/include/linux/sunrpc/sched.h b/include/linux/sunrpc/sched.h index d81db8012c63..f73c482ec9c6 100644 --- a/include/linux/sunrpc/sched.h +++ b/include/linux/sunrpc/sched.h @@ -127,13 +127,16 @@ struct rpc_task_setup { #define RPC_TASK_KILLED 0x0100 /* task was killed */ #define RPC_TASK_SOFT 0x0200 /* Use soft timeouts */ #define RPC_TASK_SOFTCONN 0x0400 /* Fail if can't connect */ +#define RPC_TASK_SENT 0x0800 /* message was sent */ +#define RPC_TASK_TIMEOUT 0x1000 /* fail with ETIMEDOUT on timeout */ #define RPC_IS_ASYNC(t) ((t)->tk_flags & RPC_TASK_ASYNC) #define RPC_IS_SWAPPER(t) ((t)->tk_flags & RPC_TASK_SWAPPER) #define RPC_DO_ROOTOVERRIDE(t) ((t)->tk_flags & RPC_TASK_ROOTCREDS) #define RPC_ASSASSINATED(t) ((t)->tk_flags & RPC_TASK_KILLED) -#define RPC_IS_SOFT(t) ((t)->tk_flags & RPC_TASK_SOFT) +#define RPC_IS_SOFT(t) ((t)->tk_flags & (RPC_TASK_SOFT|RPC_TASK_TIMEOUT)) #define RPC_IS_SOFTCONN(t) ((t)->tk_flags & RPC_TASK_SOFTCONN) +#define RPC_WAS_SENT(t) ((t)->tk_flags & RPC_TASK_SENT) #define RPC_TASK_RUNNING 0 #define RPC_TASK_QUEUED 1 diff --git a/include/linux/sunrpc/svcauth_gss.h b/include/linux/sunrpc/svcauth_gss.h index ca7d725861fc..83bbee3f089c 100644 --- a/include/linux/sunrpc/svcauth_gss.h +++ b/include/linux/sunrpc/svcauth_gss.h @@ -2,7 +2,7 @@ * linux/include/linux/sunrpc/svcauth_gss.h * * Bruce Fields <bfields@umich.edu> - * Copyright (c) 2002 The Regents of the Unviersity of Michigan + * Copyright (c) 2002 The Regents of the University of Michigan */ #ifndef _LINUX_SUNRPC_SVCAUTH_GSS_H diff --git a/include/linux/suspend.h b/include/linux/suspend.h index 5a89e3612875..083ffea7ba18 100644 --- a/include/linux/suspend.h +++ b/include/linux/suspend.h @@ -249,6 +249,8 @@ extern void hibernation_set_ops(const struct platform_hibernation_ops *ops); extern int hibernate(void); extern bool system_entering_hibernation(void); #else /* CONFIG_HIBERNATION */ +static inline void register_nosave_region(unsigned long b, unsigned long e) {} +static inline void register_nosave_region_late(unsigned long b, unsigned long e) {} static inline int swsusp_page_is_forbidden(struct page *p) { return 0; } static inline void swsusp_set_page_free(struct page *p) {} static inline void swsusp_unset_page_free(struct page *p) {} @@ -297,14 +299,7 @@ static inline bool pm_wakeup_pending(void) { return false; } extern struct mutex pm_mutex; -#ifndef CONFIG_HIBERNATION -static inline void register_nosave_region(unsigned long b, unsigned long e) -{ -} -static inline void register_nosave_region_late(unsigned long b, unsigned long e) -{ -} - +#ifndef CONFIG_HIBERNATE_CALLBACKS static inline void lock_system_sleep(void) {} static inline void unlock_system_sleep(void) {} diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h index 83ecc1749ef6..ab71447d0c5a 100644 --- a/include/linux/syscalls.h +++ b/include/linux/syscalls.h @@ -610,6 +610,8 @@ asmlinkage long sys_send(int, void __user *, size_t, unsigned); asmlinkage long sys_sendto(int, void __user *, size_t, unsigned, struct sockaddr __user *, int); asmlinkage long sys_sendmsg(int fd, struct msghdr __user *msg, unsigned flags); +asmlinkage long sys_sendmmsg(int fd, struct mmsghdr __user *msg, + unsigned int vlen, unsigned flags); asmlinkage long sys_recv(int, void __user *, size_t, unsigned); asmlinkage long sys_recvfrom(int, void __user *, size_t, unsigned, struct sockaddr __user *, int __user *); diff --git a/include/linux/sysdev.h b/include/linux/sysdev.h index 8a75da551e4e..d35e783a598c 100644 --- a/include/linux/sysdev.h +++ b/include/linux/sysdev.h @@ -7,13 +7,13 @@ * We still have a notion of a driver for a system device, because we still * want to perform basic operations on these devices. * - * We also support auxillary drivers binding to devices of a certain class. + * We also support auxiliary drivers binding to devices of a certain class. * * This allows configurable drivers to register themselves for devices of * a certain type. And, it allows class definitions to reside in generic * code while arch-specific code can register specific drivers. * - * Auxillary drivers registered with a NULL cls are registered as drivers + * Auxiliary drivers registered with a NULL cls are registered as drivers * for all system devices, and get notification calls for each device. */ @@ -34,12 +34,6 @@ struct sysdev_class { struct list_head drivers; struct sysdev_class_attribute **attrs; struct kset kset; -#ifndef CONFIG_ARCH_NO_SYSDEV_OPS - /* Default operations for these types of devices */ - int (*shutdown)(struct sys_device *); - int (*suspend)(struct sys_device *, pm_message_t state); - int (*resume)(struct sys_device *); -#endif }; struct sysdev_class_attribute { @@ -70,18 +64,13 @@ extern int sysdev_class_create_file(struct sysdev_class *, extern void sysdev_class_remove_file(struct sysdev_class *, struct sysdev_class_attribute *); /** - * Auxillary system device drivers. + * Auxiliary system device drivers. */ struct sysdev_driver { struct list_head entry; int (*add)(struct sys_device *); int (*remove)(struct sys_device *); -#ifndef CONFIG_ARCH_NO_SYSDEV_OPS - int (*shutdown)(struct sys_device *); - int (*suspend)(struct sys_device *, pm_message_t state); - int (*resume)(struct sys_device *); -#endif }; diff --git a/include/linux/sysfs.h b/include/linux/sysfs.h index 30b881555fa5..c3acda60eee0 100644 --- a/include/linux/sysfs.h +++ b/include/linux/sysfs.h @@ -176,7 +176,6 @@ struct sysfs_dirent *sysfs_get_dirent(struct sysfs_dirent *parent_sd, const unsigned char *name); struct sysfs_dirent *sysfs_get(struct sysfs_dirent *sd); void sysfs_put(struct sysfs_dirent *sd); -void sysfs_printk_last_file(void); /* Called to clear a ns tag when it is no longer valid */ void sysfs_exit_ns(enum kobj_ns_type type, const void *tag); @@ -348,10 +347,6 @@ static inline int __must_check sysfs_init(void) return 0; } -static inline void sysfs_printk_last_file(void) -{ -} - #endif /* CONFIG_SYSFS */ #endif /* _SYSFS_H_ */ diff --git a/include/linux/ti_wilink_st.h b/include/linux/ti_wilink_st.h index 7071ec5d0118..b004e557caa9 100644 --- a/include/linux/ti_wilink_st.h +++ b/include/linux/ti_wilink_st.h @@ -140,12 +140,12 @@ extern long st_unregister(struct st_proto_s *); */ struct st_data_s { unsigned long st_state; - struct tty_struct *tty; struct sk_buff *tx_skb; #define ST_TX_SENDING 1 #define ST_TX_WAKEUP 2 unsigned long tx_state; struct st_proto_s *list[ST_MAX_CHANNELS]; + bool is_registered[ST_MAX_CHANNELS]; unsigned long rx_state; unsigned long rx_count; struct sk_buff *rx_skb; @@ -155,6 +155,7 @@ struct st_data_s { unsigned char protos_registered; unsigned long ll_state; void *kim_data; + struct tty_struct *tty; }; /* diff --git a/include/linux/time.h b/include/linux/time.h index 454a26205787..b3061782dec3 100644 --- a/include/linux/time.h +++ b/include/linux/time.h @@ -126,6 +126,7 @@ struct timespec __current_kernel_time(void); /* does not take xtime_lock */ struct timespec get_monotonic_coarse(void); void get_xtime_and_monotonic_and_sleep_offset(struct timespec *xtim, struct timespec *wtom, struct timespec *sleep); +void timekeeping_inject_sleeptime(struct timespec *delta); #define CURRENT_TIME (current_kernel_time()) #define CURRENT_TIME_SEC ((struct timespec) { get_seconds(), 0 }) @@ -294,6 +295,8 @@ struct itimerval { #define CLOCK_REALTIME_COARSE 5 #define CLOCK_MONOTONIC_COARSE 6 #define CLOCK_BOOTTIME 7 +#define CLOCK_REALTIME_ALARM 8 +#define CLOCK_BOOTTIME_ALARM 9 /* * The IDs of various hardware clocks: diff --git a/include/linux/timerqueue.h b/include/linux/timerqueue.h index d24aabaca474..5088727478fd 100644 --- a/include/linux/timerqueue.h +++ b/include/linux/timerqueue.h @@ -24,7 +24,7 @@ extern struct timerqueue_node *timerqueue_iterate_next( struct timerqueue_node *node); /** - * timerqueue_getnext - Returns the timer with the earlies expiration time + * timerqueue_getnext - Returns the timer with the earliest expiration time * * @head: head of timerqueue * @@ -39,7 +39,7 @@ struct timerqueue_node *timerqueue_getnext(struct timerqueue_head *head) static inline void timerqueue_init(struct timerqueue_node *node) { - RB_CLEAR_NODE(&node->node); + rb_init_node(&node->node); } static inline void timerqueue_init_head(struct timerqueue_head *head) diff --git a/include/linux/tipc.h b/include/linux/tipc.h index a5b994a204d2..f2d90091cc20 100644 --- a/include/linux/tipc.h +++ b/include/linux/tipc.h @@ -101,7 +101,7 @@ static inline unsigned int tipc_node(__u32 addr) * Limiting values for messages */ -#define TIPC_MAX_USER_MSG_SIZE 66000 +#define TIPC_MAX_USER_MSG_SIZE 66000U /* * Message importance levels diff --git a/include/linux/tracehook.h b/include/linux/tracehook.h index 3a2e66d88a32..e95f5236611f 100644 --- a/include/linux/tracehook.h +++ b/include/linux/tracehook.h @@ -169,7 +169,7 @@ static inline int tracehook_unsafe_exec(struct task_struct *task) * tracehook_tracer_task - return the task that is tracing the given task * @tsk: task to consider * - * Returns NULL if noone is tracing @task, or the &struct task_struct + * Returns NULL if no one is tracing @task, or the &struct task_struct * pointer to its tracer. * * Must called under rcu_read_lock(). The pointer returned might be kept @@ -448,7 +448,7 @@ static inline int tracehook_force_sigpending(void) * * Return zero to check for a real pending signal normally. * Return -1 after releasing the siglock to repeat the check. - * Return a signal number to induce an artifical signal delivery, + * Return a signal number to induce an artificial signal delivery, * setting *@info and *@return_ka to specify its details and behavior. * * The @return_ka->sa_handler value controls the disposition of the @@ -469,33 +469,6 @@ static inline int tracehook_get_signal(struct task_struct *task, } /** - * tracehook_notify_jctl - report about job control stop/continue - * @notify: zero, %CLD_STOPPED or %CLD_CONTINUED - * @why: %CLD_STOPPED or %CLD_CONTINUED - * - * This is called when we might call do_notify_parent_cldstop(). - * - * @notify is zero if we would not ordinarily send a %SIGCHLD, - * or is the %CLD_STOPPED or %CLD_CONTINUED .si_code for %SIGCHLD. - * - * @why is %CLD_STOPPED when about to stop for job control; - * we are already in %TASK_STOPPED state, about to call schedule(). - * It might also be that we have just exited (check %PF_EXITING), - * but need to report that a group-wide stop is complete. - * - * @why is %CLD_CONTINUED when waking up after job control stop and - * ready to make a delayed @notify report. - * - * Return the %CLD_* value for %SIGCHLD, or zero to generate no signal. - * - * Called with the siglock held. - */ -static inline int tracehook_notify_jctl(int notify, int why) -{ - return notify ?: (current->ptrace & PT_PTRACED) ? why : 0; -} - -/** * tracehook_finish_jctl - report about return from job control stop * * This is called by do_signal_stop() after wakeup. diff --git a/include/linux/tracepoint.h b/include/linux/tracepoint.h index 97c84a58efb8..d530a4460a0b 100644 --- a/include/linux/tracepoint.h +++ b/include/linux/tracepoint.h @@ -29,7 +29,7 @@ struct tracepoint_func { struct tracepoint { const char *name; /* Tracepoint name */ - int state; /* State. */ + struct jump_label_key key; void (*regfunc)(void); void (*unregfunc)(void); struct tracepoint_func __rcu *funcs; @@ -146,9 +146,7 @@ void tracepoint_update_probe_range(struct tracepoint * const *begin, extern struct tracepoint __tracepoint_##name; \ static inline void trace_##name(proto) \ { \ - JUMP_LABEL(&__tracepoint_##name.state, do_trace); \ - return; \ -do_trace: \ + if (static_branch(&__tracepoint_##name.key)) \ __DO_TRACE(&__tracepoint_##name, \ TP_PROTO(data_proto), \ TP_ARGS(data_args), \ @@ -176,14 +174,14 @@ do_trace: \ * structures, so we create an array of pointers that will be used for iteration * on the tracepoints. */ -#define DEFINE_TRACE_FN(name, reg, unreg) \ - static const char __tpstrtab_##name[] \ - __attribute__((section("__tracepoints_strings"))) = #name; \ - struct tracepoint __tracepoint_##name \ - __attribute__((section("__tracepoints"))) = \ - { __tpstrtab_##name, 0, reg, unreg, NULL }; \ - static struct tracepoint * const __tracepoint_ptr_##name __used \ - __attribute__((section("__tracepoints_ptrs"))) = \ +#define DEFINE_TRACE_FN(name, reg, unreg) \ + static const char __tpstrtab_##name[] \ + __attribute__((section("__tracepoints_strings"))) = #name; \ + struct tracepoint __tracepoint_##name \ + __attribute__((section("__tracepoints"))) = \ + { __tpstrtab_##name, JUMP_LABEL_INIT, reg, unreg, NULL };\ + static struct tracepoint * const __tracepoint_ptr_##name __used \ + __attribute__((section("__tracepoints_ptrs"))) = \ &__tracepoint_##name; #define DEFINE_TRACE(name) \ diff --git a/include/linux/ucb1400.h b/include/linux/ucb1400.h index 1b4790911052..5c75153f9441 100644 --- a/include/linux/ucb1400.h +++ b/include/linux/ucb1400.h @@ -8,7 +8,7 @@ * Copyright: MontaVista Software, Inc. * * Spliting done by: Marek Vasut <marek.vasut@gmail.com> - * If something doesnt work and it worked before spliting, e-mail me, + * If something doesn't work and it worked before spliting, e-mail me, * dont bother Nicolas please ;-) * * This program is free software; you can redistribute it and/or modify diff --git a/include/linux/usb.h b/include/linux/usb.h index e63efeb378e3..65f78ca5d88e 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -623,7 +623,7 @@ extern struct usb_host_interface *usb_find_alt_setting( * USB hubs. That makes it stay the same until systems are physically * reconfigured, by re-cabling a tree of USB devices or by moving USB host * controllers. Adding and removing devices, including virtual root hubs - * in host controller driver modules, does not change these path identifers; + * in host controller driver modules, does not change these path identifiers; * neither does rebooting or re-enumerating. These are more useful identifiers * than changeable ("unstable") ones like bus numbers or device addresses. * @@ -793,7 +793,7 @@ struct usbdrv_wrap { * usb_set_intfdata() to associate driver-specific data with the * interface. It may also use usb_set_interface() to specify the * appropriate altsetting. If unwilling to manage the interface, - * return -ENODEV, if genuine IO errors occured, an appropriate + * return -ENODEV, if genuine IO errors occurred, an appropriate * negative errno value. * @disconnect: Called when the interface is no longer accessible, usually * because its device has been (or is being) disconnected or the diff --git a/include/linux/usb/composite.h b/include/linux/usb/composite.h index 3d29a7dcac2d..882a084a8411 100644 --- a/include/linux/usb/composite.h +++ b/include/linux/usb/composite.h @@ -188,7 +188,7 @@ ep_choose(struct usb_gadget *g, struct usb_endpoint_descriptor *hs, * @bind() method is then used to initialize all the functions and then * call @usb_add_function() for them. * - * Those functions would normally be independant of each other, but that's + * Those functions would normally be independent of each other, but that's * not mandatory. CDC WMC devices are an example where functions often * depend on other functions, with some functions subsidiary to others. * Such interdependency may be managed in any way, so long as all of the diff --git a/include/linux/usb/ehci_def.h b/include/linux/usb/ehci_def.h index 656380245198..e49dfd45baa4 100644 --- a/include/linux/usb/ehci_def.h +++ b/include/linux/usb/ehci_def.h @@ -159,7 +159,7 @@ struct ehci_regs { #define USBMODE_CM_IDLE (0<<0) /* idle state */ /* Moorestown has some non-standard registers, partially due to the fact that - * its EHCI controller has both TT and LPM support. HOSTPCx are extentions to + * its EHCI controller has both TT and LPM support. HOSTPCx are extensions to * PORTSCx */ #define HOSTPC0 0x84 /* HOSTPC extension */ diff --git a/include/linux/usb/functionfs.h b/include/linux/usb/functionfs.h index 6f649c13193b..7587ef934ba8 100644 --- a/include/linux/usb/functionfs.h +++ b/include/linux/usb/functionfs.h @@ -45,7 +45,7 @@ struct usb_functionfs_descs_head { * | off | name | type | description | * |-----+-----------+--------------+--------------------------------------| * | 0 | magic | LE32 | FUNCTIONFS_{FS,HS}_DESCRIPTORS_MAGIC | - * | 4 | lenght | LE32 | length of the whole data chunk | + * | 4 | length | LE32 | length of the whole data chunk | * | 8 | fs_count | LE32 | number of full-speed descriptors | * | 12 | hs_count | LE32 | number of high-speed descriptors | * | 16 | fs_descrs | Descriptor[] | list of full-speed descriptors | @@ -86,7 +86,7 @@ struct usb_functionfs_strings_head { * | 0 | lang | LE16 | language code | * | 2 | strings | String[str_count] | array of strings in given language | * - * For each string ther is one strings entry (ie. there are str_count + * For each string there is one strings entry (ie. there are str_count * string entries). Each String is a NUL terminated string encoded in * UTF-8. */ diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h index 006412ce2303..e538172c0f64 100644 --- a/include/linux/usb/gadget.h +++ b/include/linux/usb/gadget.h @@ -72,7 +72,7 @@ struct usb_ep; * Bulk endpoints can use any size buffers, and can also be used for interrupt * transfers. interrupt-only endpoints can be much less functional. * - * NOTE: this is analagous to 'struct urb' on the host side, except that + * NOTE: this is analogous to 'struct urb' on the host side, except that * it's thinner and promotes more pre-allocation. */ @@ -269,7 +269,7 @@ static inline void usb_ep_free_request(struct usb_ep *ep, * * Control endpoints ... after getting a setup() callback, the driver queues * one response (even if it would be zero length). That enables the - * status ack, after transfering data as specified in the response. Setup + * status ack, after transferring data as specified in the response. Setup * functions may return negative error codes to generate protocol stalls. * (Note that some USB device controllers disallow protocol stall responses * in some cases.) When control responses are deferred (the response is diff --git a/include/linux/usb/midi.h b/include/linux/usb/midi.h index 1d1040865661..c8c52e3c91de 100644 --- a/include/linux/usb/midi.h +++ b/include/linux/usb/midi.h @@ -70,7 +70,7 @@ struct usb_midi_out_jack_descriptor { __u8 bJackID; __u8 bNrInputPins; /* p */ struct usb_midi_source_pin pins[]; /* [p] */ - /*__u8 iJack; -- ommitted due to variable-sized pins[] */ + /*__u8 iJack; -- omitted due to variable-sized pins[] */ } __attribute__ ((packed)); #define USB_DT_MIDI_OUT_SIZE(p) (7 + 2 * (p)) diff --git a/include/linux/usb/rndis_host.h b/include/linux/usb/rndis_host.h index 05ef52861988..88fceb718c77 100644 --- a/include/linux/usb/rndis_host.h +++ b/include/linux/usb/rndis_host.h @@ -256,6 +256,8 @@ struct rndis_keepalive_c { /* IN (optionally OUT) */ #define FLAG_RNDIS_PHYM_NOT_WIRELESS 0x0001 #define FLAG_RNDIS_PHYM_WIRELESS 0x0002 +/* Flags for driver_info::data */ +#define RNDIS_DRIVER_DATA_POLL_STATUS 1 /* poll status before control */ extern void rndis_status(struct usbnet *dev, struct urb *urb); extern int diff --git a/include/linux/usb/usbnet.h b/include/linux/usb/usbnet.h index 44842c8d38c0..605b0aa8d852 100644 --- a/include/linux/usb/usbnet.h +++ b/include/linux/usb/usbnet.h @@ -68,6 +68,7 @@ struct usbnet { # define EVENT_RX_PAUSED 5 # define EVENT_DEV_WAKING 6 # define EVENT_DEV_ASLEEP 7 +# define EVENT_DEV_OPEN 8 }; static inline struct usb_driver *driver_of(struct usb_interface *intf) @@ -97,11 +98,14 @@ struct driver_info { #define FLAG_LINK_INTR 0x0800 /* updates link (carrier) status */ +#define FLAG_POINTTOPOINT 0x1000 /* possibly use "usb%d" names */ + /* * Indicates to usbnet, that USB driver accumulates multiple IP packets. * Affects statistic (counters) and short packet handling. */ -#define FLAG_MULTI_PACKET 0x1000 +#define FLAG_MULTI_PACKET 0x2000 +#define FLAG_RX_ASSEMBLE 0x4000 /* rx packets may span >1 frames */ /* init device ... can sleep, or cause probe() failure */ int (*bind)(struct usbnet *, struct usb_interface *); @@ -172,7 +176,9 @@ struct cdc_state { }; extern int usbnet_generic_cdc_bind(struct usbnet *, struct usb_interface *); +extern int usbnet_cdc_bind(struct usbnet *, struct usb_interface *); extern void usbnet_cdc_unbind(struct usbnet *, struct usb_interface *); +extern void usbnet_cdc_status(struct usbnet *, struct urb *); /* CDC and RNDIS support the same host-chosen packet filters for IN transfers */ #define DEFAULT_FILTER (USB_CDC_PACKET_TYPE_BROADCAST \ diff --git a/include/linux/usb/wusb.h b/include/linux/usb/wusb.h index 63ebdcc5dda6..0c4d4ca370ec 100644 --- a/include/linux/usb/wusb.h +++ b/include/linux/usb/wusb.h @@ -126,7 +126,7 @@ enum { /** * WUSB IE: Channel Stop (WUSB1.0[7.5.8]) * - * Tells devices the host is going to stop sending MMCs and will dissapear. + * Tells devices the host is going to stop sending MMCs and will disappear. */ struct wuie_channel_stop { struct wuie_hdr hdr; diff --git a/include/linux/uwb.h b/include/linux/uwb.h index 7fc9746f22cd..b0c564ec2160 100644 --- a/include/linux/uwb.h +++ b/include/linux/uwb.h @@ -274,7 +274,7 @@ static inline void uwb_mas_bm_copy_le(void *dst, const struct uwb_mas_bm *mas) /** * struct uwb_drp_avail - a radio controller's view of MAS usage - * @global: MAS unused by neighbors (excluding reservations targetted + * @global: MAS unused by neighbors (excluding reservations targeted * or owned by the local radio controller) or the beaon period * @local: MAS unused by local established reservations * @pending: MAS unused by local pending reservations @@ -702,10 +702,10 @@ void edc_init(struct edc *edc) edc->timestart = jiffies; } -/* Called when an error occured. +/* Called when an error occurred. * This is way to determine if the number of acceptable errors per time * period has been exceeded. It is not accurate as there are cases in which - * this scheme will not work, for example if there are periodic occurences + * this scheme will not work, for example if there are periodic occurrences * of errors that straddle updates to the start time. This scheme is * sufficient for our usage. * diff --git a/include/linux/uwb/umc.h b/include/linux/uwb/umc.h index 4b4fc0f43855..7b4842028ca7 100644 --- a/include/linux/uwb/umc.h +++ b/include/linux/uwb/umc.h @@ -132,7 +132,7 @@ int umc_match_pci_id(struct umc_driver *umc_drv, struct umc_dev *umc); * * FIXME: This is as dirty as it gets, but we need some way to check * the correct type of umc_dev->parent (so that for example, we can - * cast to pci_dev). Casting to pci_dev is necesary because at some + * cast to pci_dev). Casting to pci_dev is necessary because at some * point we need to request resources from the device. Mapping is * easily over come (ioremap and stuff are bus agnostic), but hooking * up to some error handlers (such as pci error handlers) might need diff --git a/include/linux/v4l2-mediabus.h b/include/linux/v4l2-mediabus.h index 7054a7a8065e..de5c15921025 100644 --- a/include/linux/v4l2-mediabus.h +++ b/include/linux/v4l2-mediabus.h @@ -47,7 +47,7 @@ enum v4l2_mbus_pixelcode { V4L2_MBUS_FMT_RGB565_2X8_BE = 0x1007, V4L2_MBUS_FMT_RGB565_2X8_LE = 0x1008, - /* YUV (including grey) - next is 0x2013 */ + /* YUV (including grey) - next is 0x2014 */ V4L2_MBUS_FMT_Y8_1X8 = 0x2001, V4L2_MBUS_FMT_UYVY8_1_5X8 = 0x2002, V4L2_MBUS_FMT_VYUY8_1_5X8 = 0x2003, @@ -60,6 +60,7 @@ enum v4l2_mbus_pixelcode { V4L2_MBUS_FMT_Y10_1X10 = 0x200a, V4L2_MBUS_FMT_YUYV10_2X10 = 0x200b, V4L2_MBUS_FMT_YVYU10_2X10 = 0x200c, + V4L2_MBUS_FMT_Y12_1X12 = 0x2013, V4L2_MBUS_FMT_UYVY8_1X16 = 0x200f, V4L2_MBUS_FMT_VYUY8_1X16 = 0x2010, V4L2_MBUS_FMT_YUYV8_1X16 = 0x2011, @@ -67,9 +68,11 @@ enum v4l2_mbus_pixelcode { V4L2_MBUS_FMT_YUYV10_1X20 = 0x200d, V4L2_MBUS_FMT_YVYU10_1X20 = 0x200e, - /* Bayer - next is 0x3013 */ + /* Bayer - next is 0x3015 */ V4L2_MBUS_FMT_SBGGR8_1X8 = 0x3001, + V4L2_MBUS_FMT_SGBRG8_1X8 = 0x3013, V4L2_MBUS_FMT_SGRBG8_1X8 = 0x3002, + V4L2_MBUS_FMT_SRGGB8_1X8 = 0x3014, V4L2_MBUS_FMT_SBGGR10_DPCM8_1X8 = 0x300b, V4L2_MBUS_FMT_SGBRG10_DPCM8_1X8 = 0x300c, V4L2_MBUS_FMT_SGRBG10_DPCM8_1X8 = 0x3009, diff --git a/include/linux/vgaarb.h b/include/linux/vgaarb.h index e9e1524b582c..9c3120dca294 100644 --- a/include/linux/vgaarb.h +++ b/include/linux/vgaarb.h @@ -78,7 +78,7 @@ extern void vga_set_legacy_decoding(struct pci_dev *pdev, * wether the card is doing legacy decoding for that type of resource. If * yes, the lock is "converted" into a legacy resource lock. * The arbiter will first look for all VGA cards that might conflict - * and disable their IOs and/or Memory access, inlcuding VGA forwarding + * and disable their IOs and/or Memory access, including VGA forwarding * on P2P bridges if necessary, so that the requested resources can * be used. Then, the card is marked as locking these resources and * the IO and/or Memory accesse are enabled on the card (including @@ -187,7 +187,7 @@ extern struct pci_dev *vga_default_device(void); * vga_conflicts * * Architectures should define this if they have several - * independant PCI domains that can afford concurrent VGA + * independent PCI domains that can afford concurrent VGA * decoding */ diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h index aa6c393b7ae9..be82c8ead1af 100644 --- a/include/linux/videodev2.h +++ b/include/linux/videodev2.h @@ -308,6 +308,7 @@ struct v4l2_pix_format { #define V4L2_PIX_FMT_Y4 v4l2_fourcc('Y', '0', '4', ' ') /* 4 Greyscale */ #define V4L2_PIX_FMT_Y6 v4l2_fourcc('Y', '0', '6', ' ') /* 6 Greyscale */ #define V4L2_PIX_FMT_Y10 v4l2_fourcc('Y', '1', '0', ' ') /* 10 Greyscale */ +#define V4L2_PIX_FMT_Y12 v4l2_fourcc('Y', '1', '2', ' ') /* 12 Greyscale */ #define V4L2_PIX_FMT_Y16 v4l2_fourcc('Y', '1', '6', ' ') /* 16 Greyscale */ /* Palette formats */ diff --git a/include/linux/vmalloc.h b/include/linux/vmalloc.h index 4ed6fcd6b726..9332e52ea8c2 100644 --- a/include/linux/vmalloc.h +++ b/include/linux/vmalloc.h @@ -95,10 +95,27 @@ extern struct vm_struct *remove_vm_area(const void *addr); extern int map_vm_area(struct vm_struct *area, pgprot_t prot, struct page ***pages); +#ifdef CONFIG_MMU extern int map_kernel_range_noflush(unsigned long start, unsigned long size, pgprot_t prot, struct page **pages); extern void unmap_kernel_range_noflush(unsigned long addr, unsigned long size); extern void unmap_kernel_range(unsigned long addr, unsigned long size); +#else +static inline int +map_kernel_range_noflush(unsigned long start, unsigned long size, + pgprot_t prot, struct page **pages) +{ + return size >> PAGE_SHIFT; +} +static inline void +unmap_kernel_range_noflush(unsigned long addr, unsigned long size) +{ +} +static inline void +unmap_kernel_range(unsigned long addr, unsigned long size) +{ +} +#endif /* Allocate/destroy a 'vmalloc' VM area. */ extern struct vm_struct *alloc_vm_area(size_t size); @@ -116,11 +133,26 @@ extern struct vm_struct *vmlist; extern __init void vm_area_register_early(struct vm_struct *vm, size_t align); #ifdef CONFIG_SMP +# ifdef CONFIG_MMU struct vm_struct **pcpu_get_vm_areas(const unsigned long *offsets, const size_t *sizes, int nr_vms, size_t align); void pcpu_free_vm_areas(struct vm_struct **vms, int nr_vms); +# else +static inline struct vm_struct ** +pcpu_get_vm_areas(const unsigned long *offsets, + const size_t *sizes, int nr_vms, + size_t align) +{ + return NULL; +} + +static inline void +pcpu_free_vm_areas(struct vm_struct **vms, int nr_vms) +{ +} +# endif #endif #endif /* _LINUX_VMALLOC_H */ diff --git a/include/linux/vmstat.h b/include/linux/vmstat.h index 461c0119664f..2b3831b58aa4 100644 --- a/include/linux/vmstat.h +++ b/include/linux/vmstat.h @@ -58,6 +58,13 @@ enum vm_event_item { PGPGIN, PGPGOUT, PSWPIN, PSWPOUT, UNEVICTABLE_PGCLEARED, /* on COW, page truncate */ UNEVICTABLE_PGSTRANDED, /* unable to isolate on unlock */ UNEVICTABLE_MLOCKFREED, +#ifdef CONFIG_TRANSPARENT_HUGEPAGE + THP_FAULT_ALLOC, + THP_FAULT_FALLBACK, + THP_COLLAPSE_ALLOC, + THP_COLLAPSE_ALLOC_FAILED, + THP_SPLIT, +#endif NR_VM_EVENT_ITEMS }; diff --git a/include/linux/wimax.h b/include/linux/wimax.h index 4fdcc5635518..9f6b77af2f6d 100644 --- a/include/linux/wimax.h +++ b/include/linux/wimax.h @@ -114,7 +114,7 @@ enum { WIMAX_GNL_RESET_IFIDX = 1, }; -/* Atributes for wimax_state_get() */ +/* Attributes for wimax_state_get() */ enum { WIMAX_GNL_STGET_IFIDX = 1, }; diff --git a/include/linux/wl12xx.h b/include/linux/wl12xx.h index bebb8efea0a6..4b697395326e 100644 --- a/include/linux/wl12xx.h +++ b/include/linux/wl12xx.h @@ -24,12 +24,26 @@ #ifndef _LINUX_WL12XX_H #define _LINUX_WL12XX_H -/* The board reference clock values */ +/* Reference clock values */ enum { - WL12XX_REFCLOCK_19 = 0, /* 19.2 MHz */ - WL12XX_REFCLOCK_26 = 1, /* 26 MHz */ - WL12XX_REFCLOCK_38 = 2, /* 38.4 MHz */ - WL12XX_REFCLOCK_54 = 3, /* 54 MHz */ + WL12XX_REFCLOCK_19 = 0, /* 19.2 MHz */ + WL12XX_REFCLOCK_26 = 1, /* 26 MHz */ + WL12XX_REFCLOCK_38 = 2, /* 38.4 MHz */ + WL12XX_REFCLOCK_52 = 3, /* 52 MHz */ + WL12XX_REFCLOCK_38_XTAL = 4, /* 38.4 MHz, XTAL */ + WL12XX_REFCLOCK_26_XTAL = 5, /* 26 MHz, XTAL */ +}; + +/* TCXO clock values */ +enum { + WL12XX_TCXOCLOCK_19_2 = 0, /* 19.2MHz */ + WL12XX_TCXOCLOCK_26 = 1, /* 26 MHz */ + WL12XX_TCXOCLOCK_38_4 = 2, /* 38.4MHz */ + WL12XX_TCXOCLOCK_52 = 3, /* 52 MHz */ + WL12XX_TCXOCLOCK_16_368 = 4, /* 16.368 MHz */ + WL12XX_TCXOCLOCK_32_736 = 5, /* 32.736 MHz */ + WL12XX_TCXOCLOCK_16_8 = 6, /* 16.8 MHz */ + WL12XX_TCXOCLOCK_33_6 = 7, /* 33.6 MHz */ }; struct wl12xx_platform_data { @@ -38,8 +52,13 @@ struct wl12xx_platform_data { int irq; bool use_eeprom; int board_ref_clock; + int board_tcxo_clock; + unsigned long platform_quirks; }; +/* Platform does not support level trigger interrupts */ +#define WL12XX_PLATFORM_QUIRK_EDGE_IRQ BIT(0) + #ifdef CONFIG_WL12XX_PLATFORM_DATA int wl12xx_set_platform_data(const struct wl12xx_platform_data *data); diff --git a/include/linux/xilinxfb.h b/include/linux/xilinxfb.h index f2463f559fb9..5a155a968054 100644 --- a/include/linux/xilinxfb.h +++ b/include/linux/xilinxfb.h @@ -16,7 +16,7 @@ /* ML300/403 reference design framebuffer driver platform data struct */ struct xilinxfb_platform_data { u32 rotate_screen; /* Flag to rotate display 180 degrees */ - u32 screen_height_mm; /* Physical dimentions of screen in mm */ + u32 screen_height_mm; /* Physical dimensions of screen in mm */ u32 screen_width_mm; u32 xres, yres; /* resolution of screen in pixels */ u32 xvirt, yvirt; /* resolution of memory buffer */ |