diff options
Diffstat (limited to 'include/media/rc-core.h')
| -rw-r--r-- | include/media/rc-core.h | 211 |
1 files changed, 211 insertions, 0 deletions
diff --git a/include/media/rc-core.h b/include/media/rc-core.h new file mode 100644 index 000000000000..eedb2f0575a4 --- /dev/null +++ b/include/media/rc-core.h @@ -0,0 +1,211 @@ +/* + * Remote Controller core header + * + * Copyright (C) 2009-2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _IR_CORE +#define _IR_CORE + +#include <linux/spinlock.h> +#include <linux/kfifo.h> +#include <linux/time.h> +#include <linux/timer.h> +#include <media/rc-map.h> + +extern int rc_core_debug; +#define IR_dprintk(level, fmt, arg...) if (rc_core_debug >= level) \ + printk(KERN_DEBUG "%s: " fmt , __func__, ## arg) + +enum rc_driver_type { + RC_DRIVER_SCANCODE = 0, /* Driver or hardware generates a scancode */ + RC_DRIVER_IR_RAW, /* Needs a Infra-Red pulse/space decoder */ +}; + +/** + * struct rc_dev - represents a remote control device + * @dev: driver model's view of this device + * @input_name: name of the input child device + * @input_phys: physical path to the input child device + * @input_id: id of the input child device (struct input_id) + * @driver_name: name of the hardware driver which registered this device + * @map_name: name of the default keymap + * @rc_tab: current scan/key table + * @devno: unique remote control device number + * @raw: additional data for raw pulse/space devices + * @input_dev: the input child device used to communicate events to userspace + * @driver_type: specifies if protocol decoding is done in hardware or software + * @idle: used to keep track of RX state + * @allowed_protos: bitmask with the supported IR_TYPE_* protocols + * @scanmask: some hardware decoders are not capable of providing the full + * scancode to the application. As this is a hardware limit, we can't do + * anything with it. Yet, as the same keycode table can be used with other + * devices, a mask is provided to allow its usage. Drivers should generally + * leave this field in blank + * @priv: driver-specific data + * @keylock: protects the remaining members of the struct + * @keypressed: whether a key is currently pressed + * @keyup_jiffies: time (in jiffies) when the current keypress should be released + * @timer_keyup: timer for releasing a keypress + * @last_keycode: keycode of last keypress + * @last_scancode: scancode of last keypress + * @last_toggle: toggle value of last command + * @timeout: optional time after which device stops sending data + * @min_timeout: minimum timeout supported by device + * @max_timeout: maximum timeout supported by device + * @rx_resolution : resolution (in ns) of input sampler + * @tx_resolution: resolution (in ns) of output sampler + * @change_protocol: allow changing the protocol used on hardware decoders + * @open: callback to allow drivers to enable polling/irq when IR input device + * is opened. + * @close: callback to allow drivers to disable polling/irq when IR input device + * is opened. + * @s_tx_mask: set transmitter mask (for devices with multiple tx outputs) + * @s_tx_carrier: set transmit carrier frequency + * @s_tx_duty_cycle: set transmit duty cycle (0% - 100%) + * @s_rx_carrier: inform driver about carrier it is expected to handle + * @tx_ir: transmit IR + * @s_idle: enable/disable hardware idle mode, upon which, + * device doesn't interrupt host until it sees IR pulses + * @s_learning_mode: enable wide band receiver used for learning + * @s_carrier_report: enable carrier reports + */ +struct rc_dev { + struct device dev; + const char *input_name; + const char *input_phys; + struct input_id input_id; + char *driver_name; + const char *map_name; + struct ir_scancode_table rc_tab; + unsigned long devno; + struct ir_raw_event_ctrl *raw; + struct input_dev *input_dev; + enum rc_driver_type driver_type; + bool idle; + u64 allowed_protos; + u32 scanmask; + void *priv; + spinlock_t keylock; + bool keypressed; + unsigned long keyup_jiffies; + struct timer_list timer_keyup; + u32 last_keycode; + u32 last_scancode; + u8 last_toggle; + u32 timeout; + u32 min_timeout; + u32 max_timeout; + u32 rx_resolution; + u32 tx_resolution; + int (*change_protocol)(struct rc_dev *dev, u64 ir_type); + int (*open)(struct rc_dev *dev); + void (*close)(struct rc_dev *dev); + int (*s_tx_mask)(struct rc_dev *dev, u32 mask); + int (*s_tx_carrier)(struct rc_dev *dev, u32 carrier); + int (*s_tx_duty_cycle)(struct rc_dev *dev, u32 duty_cycle); + int (*s_rx_carrier_range)(struct rc_dev *dev, u32 min, u32 max); + int (*tx_ir)(struct rc_dev *dev, int *txbuf, u32 n); + void (*s_idle)(struct rc_dev *dev, bool enable); + int (*s_learning_mode)(struct rc_dev *dev, int enable); + int (*s_carrier_report) (struct rc_dev *dev, int enable); +}; + +enum raw_event_type { + IR_SPACE = (1 << 0), + IR_PULSE = (1 << 1), + IR_START_EVENT = (1 << 2), + IR_STOP_EVENT = (1 << 3), +}; + +#define to_rc_dev(d) container_of(d, struct rc_dev, dev) + + +void ir_repeat(struct rc_dev *dev); +void ir_keydown(struct rc_dev *dev, int scancode, u8 toggle); +void ir_keydown_notimeout(struct rc_dev *dev, int scancode, u8 toggle); +void ir_keyup(struct rc_dev *dev); +u32 ir_g_keycode_from_table(struct rc_dev *dev, u32 scancode); + +/* From ir-raw-event.c */ +struct ir_raw_event { + union { + u32 duration; + + struct { + u32 carrier; + u8 duty_cycle; + }; + }; + + unsigned pulse:1; + unsigned reset:1; + unsigned timeout:1; + unsigned carrier_report:1; +}; + +#define DEFINE_IR_RAW_EVENT(event) \ + struct ir_raw_event event = { \ + { .duration = 0 } , \ + .pulse = 0, \ + .reset = 0, \ + .timeout = 0, \ + .carrier_report = 0 } + +static inline void init_ir_raw_event(struct ir_raw_event *ev) +{ + memset(ev, 0, sizeof(*ev)); +} + +#define IR_MAX_DURATION 0xFFFFFFFF /* a bit more than 4 seconds */ + +struct rc_dev *rc_allocate_device(void); +void rc_free_device(struct rc_dev *dev); +int rc_register_device(struct rc_dev *dev); +void rc_unregister_device(struct rc_dev *dev); + +void ir_raw_event_handle(struct rc_dev *dev); +int ir_raw_event_store(struct rc_dev *dev, struct ir_raw_event *ev); +int ir_raw_event_store_edge(struct rc_dev *dev, enum raw_event_type type); +int ir_raw_event_store_with_filter(struct rc_dev *dev, + struct ir_raw_event *ev); +void ir_raw_event_set_idle(struct rc_dev *dev, bool idle); + +static inline void ir_raw_event_reset(struct rc_dev *dev) +{ + DEFINE_IR_RAW_EVENT(ev); + ev.reset = true; + + ir_raw_event_store(dev, &ev); + ir_raw_event_handle(dev); +} + + +/* extract mask bits out of data and pack them into the result */ +static inline u32 ir_extract_bits(u32 data, u32 mask) +{ + u32 vbit = 1, value = 0; + + do { + if (mask & 1) { + if (data & 1) + value |= vbit; + vbit <<= 1; + } + data >>= 1; + } while (mask >>= 1); + + return value; +} + + +#endif /* _IR_CORE */ |