diff options
Diffstat (limited to 'include/media')
| -rw-r--r-- | include/media/demux.h | 589 | ||||
| -rw-r--r-- | include/media/dmxdev.h | 210 | ||||
| -rw-r--r-- | include/media/dvb-usb-ids.h | 424 | ||||
| -rw-r--r-- | include/media/dvb_ca_en50221.h | 142 | ||||
| -rw-r--r-- | include/media/dvb_demux.h | 350 | ||||
| -rw-r--r-- | include/media/dvb_frontend.h | 795 | ||||
| -rw-r--r-- | include/media/dvb_math.h | 66 | ||||
| -rw-r--r-- | include/media/dvb_net.h | 93 | ||||
| -rw-r--r-- | include/media/dvb_ringbuffer.h | 280 | ||||
| -rw-r--r-- | include/media/dvb_vb2.h | 96 | ||||
| -rw-r--r-- | include/media/dvbdev.h | 407 | ||||
| -rw-r--r-- | include/media/videobuf-dvb.h | 10 | ||||
| -rw-r--r-- | include/media/videobuf2-dvb.h | 11 |
13 files changed, 3462 insertions, 11 deletions
diff --git a/include/media/demux.h b/include/media/demux.h new file mode 100644 index 000000000000..c4df6cee48e6 --- /dev/null +++ b/include/media/demux.h @@ -0,0 +1,589 @@ +/* + * demux.h + * + * The Kernel Digital TV Demux kABI defines a driver-internal interface for + * registering low-level, hardware specific driver to a hardware independent + * demux layer. + * + * Copyright (c) 2002 Convergence GmbH + * + * based on code: + * Copyright (c) 2000 Nokia Research Center + * Tampere, FINLAND + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public License + * as published by the Free Software Foundation; either version 2.1 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef __DEMUX_H +#define __DEMUX_H + +#include <linux/types.h> +#include <linux/errno.h> +#include <linux/list.h> +#include <linux/time.h> +#include <linux/dvb/dmx.h> + +/* + * Common definitions + */ + +/* + * DMX_MAX_FILTER_SIZE: Maximum length (in bytes) of a section/PES filter. + */ + +#ifndef DMX_MAX_FILTER_SIZE +#define DMX_MAX_FILTER_SIZE 18 +#endif + +/* + * DMX_MAX_SECFEED_SIZE: Maximum length (in bytes) of a private section feed + * filter. + */ + +#ifndef DMX_MAX_SECTION_SIZE +#define DMX_MAX_SECTION_SIZE 4096 +#endif +#ifndef DMX_MAX_SECFEED_SIZE +#define DMX_MAX_SECFEED_SIZE (DMX_MAX_SECTION_SIZE + 188) +#endif + +/* + * TS packet reception + */ + +/** + * enum ts_filter_type - filter type bitmap for dmx_ts_feed.set\(\) + * + * @TS_PACKET: Send TS packets (188 bytes) to callback (default). + * @TS_PAYLOAD_ONLY: In case TS_PACKET is set, only send the TS payload + * (<=184 bytes per packet) to callback + * @TS_DECODER: Send stream to built-in decoder (if present). + * @TS_DEMUX: In case TS_PACKET is set, send the TS to the demux + * device, not to the dvr device + */ +enum ts_filter_type { + TS_PACKET = 1, + TS_PAYLOAD_ONLY = 2, + TS_DECODER = 4, + TS_DEMUX = 8, +}; + +/** + * struct dmx_ts_feed - Structure that contains a TS feed filter + * + * @is_filtering: Set to non-zero when filtering in progress + * @parent: pointer to struct dmx_demux + * @priv: pointer to private data of the API client + * @set: sets the TS filter + * @start_filtering: starts TS filtering + * @stop_filtering: stops TS filtering + * + * A TS feed is typically mapped to a hardware PID filter on the demux chip. + * Using this API, the client can set the filtering properties to start/stop + * filtering TS packets on a particular TS feed. + */ +struct dmx_ts_feed { + int is_filtering; + struct dmx_demux *parent; + void *priv; + int (*set)(struct dmx_ts_feed *feed, + u16 pid, + int type, + enum dmx_ts_pes pes_type, + ktime_t timeout); + int (*start_filtering)(struct dmx_ts_feed *feed); + int (*stop_filtering)(struct dmx_ts_feed *feed); +}; + +/* + * Section reception + */ + +/** + * struct dmx_section_filter - Structure that describes a section filter + * + * @filter_value: Contains up to 16 bytes (128 bits) of the TS section header + * that will be matched by the section filter + * @filter_mask: Contains a 16 bytes (128 bits) filter mask with the bits + * specified by @filter_value that will be used on the filter + * match logic. + * @filter_mode: Contains a 16 bytes (128 bits) filter mode. + * @parent: Pointer to struct dmx_section_feed. + * @priv: Pointer to private data of the API client. + * + * + * The @filter_mask controls which bits of @filter_value are compared with + * the section headers/payload. On a binary value of 1 in filter_mask, the + * corresponding bits are compared. The filter only accepts sections that are + * equal to filter_value in all the tested bit positions. + */ +struct dmx_section_filter { + u8 filter_value[DMX_MAX_FILTER_SIZE]; + u8 filter_mask[DMX_MAX_FILTER_SIZE]; + u8 filter_mode[DMX_MAX_FILTER_SIZE]; + struct dmx_section_feed *parent; /* Back-pointer */ + void *priv; /* Pointer to private data of the API client */ +}; + +/** + * struct dmx_section_feed - Structure that contains a section feed filter + * + * @is_filtering: Set to non-zero when filtering in progress + * @parent: pointer to struct dmx_demux + * @priv: pointer to private data of the API client + * @check_crc: If non-zero, check the CRC values of filtered sections. + * @set: sets the section filter + * @allocate_filter: This function is used to allocate a section filter on + * the demux. It should only be called when no filtering + * is in progress on this section feed. If a filter cannot + * be allocated, the function fails with -ENOSPC. + * @release_filter: This function releases all the resources of a + * previously allocated section filter. The function + * should not be called while filtering is in progress + * on this section feed. After calling this function, + * the caller should not try to dereference the filter + * pointer. + * @start_filtering: starts section filtering + * @stop_filtering: stops section filtering + * + * A TS feed is typically mapped to a hardware PID filter on the demux chip. + * Using this API, the client can set the filtering properties to start/stop + * filtering TS packets on a particular TS feed. + */ +struct dmx_section_feed { + int is_filtering; + struct dmx_demux *parent; + void *priv; + + int check_crc; + + /* private: Used internally at dvb_demux.c */ + u32 crc_val; + + u8 *secbuf; + u8 secbuf_base[DMX_MAX_SECFEED_SIZE]; + u16 secbufp, seclen, tsfeedp; + + /* public: */ + int (*set)(struct dmx_section_feed *feed, + u16 pid, + int check_crc); + int (*allocate_filter)(struct dmx_section_feed *feed, + struct dmx_section_filter **filter); + int (*release_filter)(struct dmx_section_feed *feed, + struct dmx_section_filter *filter); + int (*start_filtering)(struct dmx_section_feed *feed); + int (*stop_filtering)(struct dmx_section_feed *feed); +}; + +/** + * typedef dmx_ts_cb - DVB demux TS filter callback function prototype + * + * @buffer1: Pointer to the start of the filtered TS packets. + * @buffer1_length: Length of the TS data in buffer1. + * @buffer2: Pointer to the tail of the filtered TS packets, or NULL. + * @buffer2_length: Length of the TS data in buffer2. + * @source: Indicates which TS feed is the source of the callback. + * + * This function callback prototype, provided by the client of the demux API, + * is called from the demux code. The function is only called when filtering + * on a TS feed has been enabled using the start_filtering\(\) function at + * the &dmx_demux. + * Any TS packets that match the filter settings are copied to a circular + * buffer. The filtered TS packets are delivered to the client using this + * callback function. + * It is expected that the @buffer1 and @buffer2 callback parameters point to + * addresses within the circular buffer, but other implementations are also + * possible. Note that the called party should not try to free the memory + * the @buffer1 and @buffer2 parameters point to. + * + * When this function is called, the @buffer1 parameter typically points to + * the start of the first undelivered TS packet within a circular buffer. + * The @buffer2 buffer parameter is normally NULL, except when the received + * TS packets have crossed the last address of the circular buffer and + * "wrapped" to the beginning of the buffer. In the latter case the @buffer1 + * parameter would contain an address within the circular buffer, while the + * @buffer2 parameter would contain the first address of the circular buffer. + * The number of bytes delivered with this function (i.e. @buffer1_length + + * @buffer2_length) is usually equal to the value of callback_length parameter + * given in the set() function, with one exception: if a timeout occurs before + * receiving callback_length bytes of TS data, any undelivered packets are + * immediately delivered to the client by calling this function. The timeout + * duration is controlled by the set() function in the TS Feed API. + * + * If a TS packet is received with errors that could not be fixed by the + * TS-level forward error correction (FEC), the Transport_error_indicator + * flag of the TS packet header should be set. The TS packet should not be + * discarded, as the error can possibly be corrected by a higher layer + * protocol. If the called party is slow in processing the callback, it + * is possible that the circular buffer eventually fills up. If this happens, + * the demux driver should discard any TS packets received while the buffer + * is full and return -EOVERFLOW. + * + * The type of data returned to the callback can be selected by the + * &dmx_ts_feed.@set function. The type parameter decides if the raw + * TS packet (TS_PACKET) or just the payload (TS_PACKET|TS_PAYLOAD_ONLY) + * should be returned. If additionally the TS_DECODER bit is set the stream + * will also be sent to the hardware MPEG decoder. + * + * Return: + * + * - 0, on success; + * + * - -EOVERFLOW, on buffer overflow. + */ +typedef int (*dmx_ts_cb)(const u8 *buffer1, + size_t buffer1_length, + const u8 *buffer2, + size_t buffer2_length, + struct dmx_ts_feed *source); + +/** + * typedef dmx_section_cb - DVB demux TS filter callback function prototype + * + * @buffer1: Pointer to the start of the filtered section, e.g. + * within the circular buffer of the demux driver. + * @buffer1_len: Length of the filtered section data in @buffer1, + * including headers and CRC. + * @buffer2: Pointer to the tail of the filtered section data, + * or NULL. Useful to handle the wrapping of a + * circular buffer. + * @buffer2_len: Length of the filtered section data in @buffer2, + * including headers and CRC. + * @source: Indicates which section feed is the source of the + * callback. + * + * This function callback prototype, provided by the client of the demux API, + * is called from the demux code. The function is only called when + * filtering of sections has been enabled using the function + * &dmx_ts_feed.@start_filtering. When the demux driver has received a + * complete section that matches at least one section filter, the client + * is notified via this callback function. Normally this function is called + * for each received section; however, it is also possible to deliver + * multiple sections with one callback, for example when the system load + * is high. If an error occurs while receiving a section, this + * function should be called with the corresponding error type set in the + * success field, whether or not there is data to deliver. The Section Feed + * implementation should maintain a circular buffer for received sections. + * However, this is not necessary if the Section Feed API is implemented as + * a client of the TS Feed API, because the TS Feed implementation then + * buffers the received data. The size of the circular buffer can be + * configured using the &dmx_ts_feed.@set function in the Section Feed API. + * If there is no room in the circular buffer when a new section is received, + * the section must be discarded. If this happens, the value of the success + * parameter should be DMX_OVERRUN_ERROR on the next callback. + */ +typedef int (*dmx_section_cb)(const u8 *buffer1, + size_t buffer1_len, + const u8 *buffer2, + size_t buffer2_len, + struct dmx_section_filter *source); + +/* + * DVB Front-End + */ + +/** + * enum dmx_frontend_source - Used to identify the type of frontend + * + * @DMX_MEMORY_FE: The source of the demux is memory. It means that + * the MPEG-TS to be filtered comes from userspace, + * via write() syscall. + * + * @DMX_FRONTEND_0: The source of the demux is a frontend connected + * to the demux. + */ +enum dmx_frontend_source { + DMX_MEMORY_FE, + DMX_FRONTEND_0, +}; + +/** + * struct dmx_frontend - Structure that lists the frontends associated with + * a demux + * + * @connectivity_list: List of front-ends that can be connected to a + * particular demux; + * @source: Type of the frontend. + * + * FIXME: this structure should likely be replaced soon by some + * media-controller based logic. + */ +struct dmx_frontend { + struct list_head connectivity_list; + enum dmx_frontend_source source; +}; + +/* + * MPEG-2 TS Demux + */ + +/** + * enum dmx_demux_caps - MPEG-2 TS Demux capabilities bitmap + * + * @DMX_TS_FILTERING: set if TS filtering is supported; + * @DMX_SECTION_FILTERING: set if section filtering is supported; + * @DMX_MEMORY_BASED_FILTERING: set if write() available. + * + * Those flags are OR'ed in the &dmx_demux.capabilities field + */ +enum dmx_demux_caps { + DMX_TS_FILTERING = 1, + DMX_SECTION_FILTERING = 4, + DMX_MEMORY_BASED_FILTERING = 8, +}; + +/* + * Demux resource type identifier. + */ + +/** + * DMX_FE_ENTRY - Casts elements in the list of registered + * front-ends from the generic type struct list_head + * to the type * struct dmx_frontend + * + * @list: list of struct dmx_frontend + */ +#define DMX_FE_ENTRY(list) \ + list_entry(list, struct dmx_frontend, connectivity_list) + +/** + * struct dmx_demux - Structure that contains the demux capabilities and + * callbacks. + * + * @capabilities: Bitfield of capability flags. + * + * @frontend: Front-end connected to the demux + * + * @priv: Pointer to private data of the API client + * + * @open: This function reserves the demux for use by the caller and, if + * necessary, initializes the demux. When the demux is no longer needed, + * the function @close should be called. It should be possible for + * multiple clients to access the demux at the same time. Thus, the + * function implementation should increment the demux usage count when + * @open is called and decrement it when @close is called. + * The @demux function parameter contains a pointer to the demux API and + * instance data. + * It returns: + * 0 on success; + * -EUSERS, if maximum usage count was reached; + * -EINVAL, on bad parameter. + * + * @close: This function reserves the demux for use by the caller and, if + * necessary, initializes the demux. When the demux is no longer needed, + * the function @close should be called. It should be possible for + * multiple clients to access the demux at the same time. Thus, the + * function implementation should increment the demux usage count when + * @open is called and decrement it when @close is called. + * The @demux function parameter contains a pointer to the demux API and + * instance data. + * It returns: + * 0 on success; + * -ENODEV, if demux was not in use (e. g. no users); + * -EINVAL, on bad parameter. + * + * @write: This function provides the demux driver with a memory buffer + * containing TS packets. Instead of receiving TS packets from the DVB + * front-end, the demux driver software will read packets from memory. + * Any clients of this demux with active TS, PES or Section filters will + * receive filtered data via the Demux callback API (see 0). The function + * returns when all the data in the buffer has been consumed by the demux. + * Demux hardware typically cannot read TS from memory. If this is the + * case, memory-based filtering has to be implemented entirely in software. + * The @demux function parameter contains a pointer to the demux API and + * instance data. + * The @buf function parameter contains a pointer to the TS data in + * kernel-space memory. + * The @count function parameter contains the length of the TS data. + * It returns: + * 0 on success; + * -ERESTARTSYS, if mutex lock was interrupted; + * -EINTR, if a signal handling is pending; + * -ENODEV, if demux was removed; + * -EINVAL, on bad parameter. + * + * @allocate_ts_feed: Allocates a new TS feed, which is used to filter the TS + * packets carrying a certain PID. The TS feed normally corresponds to a + * hardware PID filter on the demux chip. + * The @demux function parameter contains a pointer to the demux API and + * instance data. + * The @feed function parameter contains a pointer to the TS feed API and + * instance data. + * The @callback function parameter contains a pointer to the callback + * function for passing received TS packet. + * It returns: + * 0 on success; + * -ERESTARTSYS, if mutex lock was interrupted; + * -EBUSY, if no more TS feeds is available; + * -EINVAL, on bad parameter. + * + * @release_ts_feed: Releases the resources allocated with @allocate_ts_feed. + * Any filtering in progress on the TS feed should be stopped before + * calling this function. + * The @demux function parameter contains a pointer to the demux API and + * instance data. + * The @feed function parameter contains a pointer to the TS feed API and + * instance data. + * It returns: + * 0 on success; + * -EINVAL on bad parameter. + * + * @allocate_section_feed: Allocates a new section feed, i.e. a demux resource + * for filtering and receiving sections. On platforms with hardware + * support for section filtering, a section feed is directly mapped to + * the demux HW. On other platforms, TS packets are first PID filtered in + * hardware and a hardware section filter then emulated in software. The + * caller obtains an API pointer of type dmx_section_feed_t as an out + * parameter. Using this API the caller can set filtering parameters and + * start receiving sections. + * The @demux function parameter contains a pointer to the demux API and + * instance data. + * The @feed function parameter contains a pointer to the TS feed API and + * instance data. + * The @callback function parameter contains a pointer to the callback + * function for passing received TS packet. + * It returns: + * 0 on success; + * -EBUSY, if no more TS feeds is available; + * -EINVAL, on bad parameter. + * + * @release_section_feed: Releases the resources allocated with + * @allocate_section_feed, including allocated filters. Any filtering in + * progress on the section feed should be stopped before calling this + * function. + * The @demux function parameter contains a pointer to the demux API and + * instance data. + * The @feed function parameter contains a pointer to the TS feed API and + * instance data. + * It returns: + * 0 on success; + * -EINVAL, on bad parameter. + * + * @add_frontend: Registers a connectivity between a demux and a front-end, + * i.e., indicates that the demux can be connected via a call to + * @connect_frontend to use the given front-end as a TS source. The + * client of this function has to allocate dynamic or static memory for + * the frontend structure and initialize its fields before calling this + * function. This function is normally called during the driver + * initialization. The caller must not free the memory of the frontend + * struct before successfully calling @remove_frontend. + * The @demux function parameter contains a pointer to the demux API and + * instance data. + * The @frontend function parameter contains a pointer to the front-end + * instance data. + * It returns: + * 0 on success; + * -EINVAL, on bad parameter. + * + * @remove_frontend: Indicates that the given front-end, registered by a call + * to @add_frontend, can no longer be connected as a TS source by this + * demux. The function should be called when a front-end driver or a demux + * driver is removed from the system. If the front-end is in use, the + * function fails with the return value of -EBUSY. After successfully + * calling this function, the caller can free the memory of the frontend + * struct if it was dynamically allocated before the @add_frontend + * operation. + * The @demux function parameter contains a pointer to the demux API and + * instance data. + * The @frontend function parameter contains a pointer to the front-end + * instance data. + * It returns: + * 0 on success; + * -ENODEV, if the front-end was not found, + * -EINVAL, on bad parameter. + * + * @get_frontends: Provides the APIs of the front-ends that have been + * registered for this demux. Any of the front-ends obtained with this + * call can be used as a parameter for @connect_frontend. The include + * file demux.h contains the macro DMX_FE_ENTRY() for converting an + * element of the generic type struct &list_head * to the type + * struct &dmx_frontend *. The caller must not free the memory of any of + * the elements obtained via this function call. + * The @demux function parameter contains a pointer to the demux API and + * instance data. + * It returns a struct list_head pointer to the list of front-end + * interfaces, or NULL in the case of an empty list. + * + * @connect_frontend: Connects the TS output of the front-end to the input of + * the demux. A demux can only be connected to a front-end registered to + * the demux with the function @add_frontend. It may or may not be + * possible to connect multiple demuxes to the same front-end, depending + * on the capabilities of the HW platform. When not used, the front-end + * should be released by calling @disconnect_frontend. + * The @demux function parameter contains a pointer to the demux API and + * instance data. + * The @frontend function parameter contains a pointer to the front-end + * instance data. + * It returns: + * 0 on success; + * -EINVAL, on bad parameter. + * + * @disconnect_frontend: Disconnects the demux and a front-end previously + * connected by a @connect_frontend call. + * The @demux function parameter contains a pointer to the demux API and + * instance data. + * It returns: + * 0 on success; + * -EINVAL on bad parameter. + * + * @get_pes_pids: Get the PIDs for DMX_PES_AUDIO0, DMX_PES_VIDEO0, + * DMX_PES_TELETEXT0, DMX_PES_SUBTITLE0 and DMX_PES_PCR0. + * The @demux function parameter contains a pointer to the demux API and + * instance data. + * The @pids function parameter contains an array with five u16 elements + * where the PIDs will be stored. + * It returns: + * 0 on success; + * -EINVAL on bad parameter. + */ +struct dmx_demux { + enum dmx_demux_caps capabilities; + struct dmx_frontend *frontend; + void *priv; + int (*open)(struct dmx_demux *demux); + int (*close)(struct dmx_demux *demux); + int (*write)(struct dmx_demux *demux, const char __user *buf, + size_t count); + int (*allocate_ts_feed)(struct dmx_demux *demux, + struct dmx_ts_feed **feed, + dmx_ts_cb callback); + int (*release_ts_feed)(struct dmx_demux *demux, + struct dmx_ts_feed *feed); + int (*allocate_section_feed)(struct dmx_demux *demux, + struct dmx_section_feed **feed, + dmx_section_cb callback); + int (*release_section_feed)(struct dmx_demux *demux, + struct dmx_section_feed *feed); + int (*add_frontend)(struct dmx_demux *demux, + struct dmx_frontend *frontend); + int (*remove_frontend)(struct dmx_demux *demux, + struct dmx_frontend *frontend); + struct list_head *(*get_frontends)(struct dmx_demux *demux); + int (*connect_frontend)(struct dmx_demux *demux, + struct dmx_frontend *frontend); + int (*disconnect_frontend)(struct dmx_demux *demux); + + int (*get_pes_pids)(struct dmx_demux *demux, u16 *pids); + + /* private: */ + + /* + * Only used at av7110, to read some data from firmware. + * As this was never documented, we have no clue about what's + * there, and its usage on other drivers aren't encouraged. + */ + int (*get_stc)(struct dmx_demux *demux, unsigned int num, + u64 *stc, unsigned int *base); +}; + +#endif /* #ifndef __DEMUX_H */ diff --git a/include/media/dmxdev.h b/include/media/dmxdev.h new file mode 100644 index 000000000000..d5bef0da2e6e --- /dev/null +++ b/include/media/dmxdev.h @@ -0,0 +1,210 @@ +/* + * dmxdev.h + * + * Copyright (C) 2000 Ralph Metzler & Marcus Metzler + * for convergence integrated media GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public License + * as published by the Free Software Foundation; either version 2.1 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef _DMXDEV_H_ +#define _DMXDEV_H_ + +#include <linux/types.h> +#include <linux/spinlock.h> +#include <linux/kernel.h> +#include <linux/time.h> +#include <linux/timer.h> +#include <linux/wait.h> +#include <linux/fs.h> +#include <linux/string.h> +#include <linux/mutex.h> +#include <linux/slab.h> + +#include <linux/dvb/dmx.h> + +#include <media/dvbdev.h> +#include <media/demux.h> +#include <media/dvb_ringbuffer.h> +#include <media/dvb_vb2.h> + +/** + * enum dmxdev_type - type of demux filter type. + * + * @DMXDEV_TYPE_NONE: no filter set. + * @DMXDEV_TYPE_SEC: section filter. + * @DMXDEV_TYPE_PES: Program Elementary Stream (PES) filter. + */ +enum dmxdev_type { + DMXDEV_TYPE_NONE, + DMXDEV_TYPE_SEC, + DMXDEV_TYPE_PES, +}; + +/** + * enum dmxdev_state - state machine for the dmxdev. + * + * @DMXDEV_STATE_FREE: indicates that the filter is freed. + * @DMXDEV_STATE_ALLOCATED: indicates that the filter was allocated + * to be used. + * @DMXDEV_STATE_SET: indicates that the filter parameters are set. + * @DMXDEV_STATE_GO: indicates that the filter is running. + * @DMXDEV_STATE_DONE: indicates that a packet was already filtered + * and the filter is now disabled. + * Set only if %DMX_ONESHOT. See + * &dmx_sct_filter_params. + * @DMXDEV_STATE_TIMEDOUT: Indicates a timeout condition. + */ +enum dmxdev_state { + DMXDEV_STATE_FREE, + DMXDEV_STATE_ALLOCATED, + DMXDEV_STATE_SET, + DMXDEV_STATE_GO, + DMXDEV_STATE_DONE, + DMXDEV_STATE_TIMEDOUT +}; + +/** + * struct dmxdev_feed - digital TV dmxdev feed + * + * @pid: Program ID to be filtered + * @ts: pointer to &struct dmx_ts_feed + * @next: &struct list_head pointing to the next feed. + */ + +struct dmxdev_feed { + u16 pid; + struct dmx_ts_feed *ts; + struct list_head next; +}; + +/** + * struct dmxdev_filter - digital TV dmxdev filter + * + * @filter: a union describing a dmxdev filter. + * Currently used only for section filters. + * @filter.sec: a &struct dmx_section_filter pointer. + * For section filter only. + * @feed: a union describing a dmxdev feed. + * Depending on the filter type, it can be either + * @feed.ts or @feed.sec. + * @feed.ts: a &struct list_head list. + * For TS and PES feeds. + * @feed.sec: a &struct dmx_section_feed pointer. + * For section feed only. + * @params: a union describing dmxdev filter parameters. + * Depending on the filter type, it can be either + * @params.sec or @params.pes. + * @params.sec: a &struct dmx_sct_filter_params embedded struct. + * For section filter only. + * @params.pes: a &struct dmx_pes_filter_params embedded struct. + * For PES filter only. + * @type: type of the dmxdev filter, as defined by &enum dmxdev_type. + * @state: state of the dmxdev filter, as defined by &enum dmxdev_state. + * @dev: pointer to &struct dmxdev. + * @buffer: an embedded &struct dvb_ringbuffer buffer. + * @mutex: protects the access to &struct dmxdev_filter. + * @timer: &struct timer_list embedded timer, used to check for + * feed timeouts. + * Only for section filter. + * @todo: index for the @secheader. + * Only for section filter. + * @secheader: buffer cache to parse the section header. + * Only for section filter. + */ +struct dmxdev_filter { + union { + struct dmx_section_filter *sec; + } filter; + + union { + /* list of TS and PES feeds (struct dmxdev_feed) */ + struct list_head ts; + struct dmx_section_feed *sec; + } feed; + + union { + struct dmx_sct_filter_params sec; + struct dmx_pes_filter_params pes; + } params; + + enum dmxdev_type type; + enum dmxdev_state state; + struct dmxdev *dev; + struct dvb_ringbuffer buffer; + struct dvb_vb2_ctx vb2_ctx; + + struct mutex mutex; + + /* only for sections */ + struct timer_list timer; + int todo; + u8 secheader[3]; +}; + +/** + * struct dmxdev - Describes a digital TV demux device. + * + * @dvbdev: pointer to &struct dvb_device associated with + * the demux device node. + * @dvr_dvbdev: pointer to &struct dvb_device associated with + * the dvr device node. + * @filter: pointer to &struct dmxdev_filter. + * @demux: pointer to &struct dmx_demux. + * @filternum: number of filters. + * @capabilities: demux capabilities as defined by &enum dmx_demux_caps. + * @exit: flag to indicate that the demux is being released. + * @dvr_orig_fe: pointer to &struct dmx_frontend. + * @dvr_buffer: embedded &struct dvb_ringbuffer for DVB output. + * @mutex: protects the usage of this structure. + * @lock: protects access to &dmxdev->filter->data. + */ +struct dmxdev { + struct dvb_device *dvbdev; + struct dvb_device *dvr_dvbdev; + + struct dmxdev_filter *filter; + struct dmx_demux *demux; + + int filternum; + int capabilities; + + unsigned int exit:1; +#define DMXDEV_CAP_DUPLEX 1 + struct dmx_frontend *dvr_orig_fe; + + struct dvb_ringbuffer dvr_buffer; +#define DVR_BUFFER_SIZE (10*188*1024) + + struct dvb_vb2_ctx dvr_vb2_ctx; + + struct mutex mutex; + spinlock_t lock; +}; + +/** + * dvb_dmxdev_init - initializes a digital TV demux and registers both demux + * and DVR devices. + * + * @dmxdev: pointer to &struct dmxdev. + * @adap: pointer to &struct dvb_adapter. + */ +int dvb_dmxdev_init(struct dmxdev *dmxdev, struct dvb_adapter *adap); + +/** + * dvb_dmxdev_release - releases a digital TV demux and unregisters it. + * + * @dmxdev: pointer to &struct dmxdev. + */ +void dvb_dmxdev_release(struct dmxdev *dmxdev); + +#endif /* _DMXDEV_H_ */ diff --git a/include/media/dvb-usb-ids.h b/include/media/dvb-usb-ids.h new file mode 100644 index 000000000000..28e2be5c8a98 --- /dev/null +++ b/include/media/dvb-usb-ids.h @@ -0,0 +1,424 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* dvb-usb-ids.h is part of the DVB USB library. + * + * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@posteo.de) see + * dvb-usb-init.c for copyright information. + * + * a header file containing define's for the USB device supported by the + * various drivers. + */ +#ifndef _DVB_USB_IDS_H_ +#define _DVB_USB_IDS_H_ + +/* Vendor IDs */ +#define USB_VID_ADSTECH 0x06e1 +#define USB_VID_AFATECH 0x15a4 +#define USB_VID_ALCOR_MICRO 0x058f +#define USB_VID_ALINK 0x05e3 +#define USB_VID_AMT 0x1c73 +#define USB_VID_ANCHOR 0x0547 +#define USB_VID_ANSONIC 0x10b9 +#define USB_VID_ANUBIS_ELECTRONIC 0x10fd +#define USB_VID_ASUS 0x0b05 +#define USB_VID_AVERMEDIA 0x07ca +#define USB_VID_COMPRO 0x185b +#define USB_VID_COMPRO_UNK 0x145f +#define USB_VID_CONEXANT 0x0572 +#define USB_VID_CYPRESS 0x04b4 +#define USB_VID_DEXATEK 0x1d19 +#define USB_VID_DIBCOM 0x10b8 +#define USB_VID_DPOSH 0x1498 +#define USB_VID_DVICO 0x0fe9 +#define USB_VID_E3C 0x18b4 +#define USB_VID_ELGATO 0x0fd9 +#define USB_VID_EMPIA 0xeb1a +#define USB_VID_GENPIX 0x09c0 +#define USB_VID_GRANDTEC 0x5032 +#define USB_VID_GTEK 0x1f4d +#define USB_VID_HANFTEK 0x15f4 +#define USB_VID_HAUPPAUGE 0x2040 +#define USB_VID_HYPER_PALTEK 0x1025 +#define USB_VID_INTEL 0x8086 +#define USB_VID_ITETECH 0x048d +#define USB_VID_KWORLD 0xeb2a +#define USB_VID_KWORLD_2 0x1b80 +#define USB_VID_KYE 0x0458 +#define USB_VID_LEADTEK 0x0413 +#define USB_VID_LITEON 0x04ca +#define USB_VID_MEDION 0x1660 +#define USB_VID_MIGLIA 0x18f3 +#define USB_VID_MSI 0x0db0 +#define USB_VID_MSI_2 0x1462 +#define USB_VID_OPERA1 0x695c +#define USB_VID_PINNACLE 0x2304 +#define USB_VID_PCTV 0x2013 +#define USB_VID_PIXELVIEW 0x1554 +#define USB_VID_REALTEK 0x0bda +#define USB_VID_TECHNOTREND 0x0b48 +#define USB_VID_TERRATEC 0x0ccd +#define USB_VID_TELESTAR 0x10b9 +#define USB_VID_VISIONPLUS 0x13d3 +#define USB_VID_SONY 0x1415 +#define USB_PID_TEVII_S421 0xd421 +#define USB_PID_TEVII_S480_1 0xd481 +#define USB_PID_TEVII_S480_2 0xd482 +#define USB_PID_TEVII_S630 0xd630 +#define USB_PID_TEVII_S632 0xd632 +#define USB_PID_TEVII_S650 0xd650 +#define USB_PID_TEVII_S660 0xd660 +#define USB_PID_TEVII_S662 0xd662 +#define USB_VID_TWINHAN 0x1822 +#define USB_VID_ULTIMA_ELECTRONIC 0x05d8 +#define USB_VID_UNIWILL 0x1584 +#define USB_VID_WIDEVIEW 0x14aa +#define USB_VID_GIGABYTE 0x1044 +#define USB_VID_YUAN 0x1164 +#define USB_VID_XTENSIONS 0x1ae7 +#define USB_VID_ZYDAS 0x0ace +#define USB_VID_HUMAX_COEX 0x10b9 +#define USB_VID_774 0x7a69 +#define USB_VID_EVOLUTEPC 0x1e59 +#define USB_VID_AZUREWAVE 0x13d3 +#define USB_VID_TECHNISAT 0x14f7 +#define USB_VID_HAMA 0x147f +#define USB_VID_MICROSOFT 0x045e + +/* Product IDs */ +#define USB_PID_ADSTECH_USB2_COLD 0xa333 +#define USB_PID_ADSTECH_USB2_WARM 0xa334 +#define USB_PID_AFATECH_AF9005 0x9020 +#define USB_PID_AFATECH_AF9015_9015 0x9015 +#define USB_PID_AFATECH_AF9015_9016 0x9016 +#define USB_PID_AFATECH_AF9035_1000 0x1000 +#define USB_PID_AFATECH_AF9035_1001 0x1001 +#define USB_PID_AFATECH_AF9035_1002 0x1002 +#define USB_PID_AFATECH_AF9035_1003 0x1003 +#define USB_PID_AFATECH_AF9035_9035 0x9035 +#define USB_PID_TREKSTOR_DVBT 0x901b +#define USB_PID_TREKSTOR_TERRES_2_0 0xC803 +#define USB_VID_ALINK_DTU 0xf170 +#define USB_PID_ANSONIC_DVBT_USB 0x6000 +#define USB_PID_ANYSEE 0x861f +#define USB_PID_AZUREWAVE_AD_TU700 0x3237 +#define USB_PID_AZUREWAVE_6007 0x0ccd +#define USB_PID_AVERMEDIA_DVBT_USB_COLD 0x0001 +#define USB_PID_AVERMEDIA_DVBT_USB_WARM 0x0002 +#define USB_PID_AVERMEDIA_DVBT_USB2_COLD 0xa800 +#define USB_PID_AVERMEDIA_DVBT_USB2_WARM 0xa801 +#define USB_PID_COMPRO_DVBU2000_COLD 0xd000 +#define USB_PID_COMPRO_DVBU2000_WARM 0xd001 +#define USB_PID_COMPRO_DVBU2000_UNK_COLD 0x010c +#define USB_PID_COMPRO_DVBU2000_UNK_WARM 0x010d +#define USB_PID_COMPRO_VIDEOMATE_U500 0x1e78 +#define USB_PID_COMPRO_VIDEOMATE_U500_PC 0x1e80 +#define USB_PID_CONCEPTRONIC_CTVDIGRCU 0xe397 +#define USB_PID_CONEXANT_D680_DMB 0x86d6 +#define USB_PID_CREATIX_CTX1921 0x1921 +#define USB_PID_DELOCK_USB2_DVBT 0xb803 +#define USB_PID_DIBCOM_HOOK_DEFAULT 0x0064 +#define USB_PID_DIBCOM_HOOK_DEFAULT_REENUM 0x0065 +#define USB_PID_DIBCOM_MOD3000_COLD 0x0bb8 +#define USB_PID_DIBCOM_MOD3000_WARM 0x0bb9 +#define USB_PID_DIBCOM_MOD3001_COLD 0x0bc6 +#define USB_PID_DIBCOM_MOD3001_WARM 0x0bc7 +#define USB_PID_DIBCOM_STK7700P 0x1e14 +#define USB_PID_DIBCOM_STK7700P_PC 0x1e78 +#define USB_PID_DIBCOM_STK7700D 0x1ef0 +#define USB_PID_DIBCOM_STK7700_U7000 0x7001 +#define USB_PID_DIBCOM_STK7070P 0x1ebc +#define USB_PID_DIBCOM_STK7070PD 0x1ebe +#define USB_PID_DIBCOM_STK807XP 0x1f90 +#define USB_PID_DIBCOM_STK807XPVR 0x1f98 +#define USB_PID_DIBCOM_STK8096GP 0x1fa0 +#define USB_PID_DIBCOM_STK8096PVR 0x1faa +#define USB_PID_DIBCOM_NIM8096MD 0x1fa8 +#define USB_PID_DIBCOM_TFE8096P 0x1f9C +#define USB_PID_DIBCOM_ANCHOR_2135_COLD 0x2131 +#define USB_PID_DIBCOM_STK7770P 0x1e80 +#define USB_PID_DIBCOM_NIM7090 0x1bb2 +#define USB_PID_DIBCOM_TFE7090PVR 0x1bb4 +#define USB_PID_DIBCOM_TFE7790P 0x1e6e +#define USB_PID_DIBCOM_NIM9090M 0x2383 +#define USB_PID_DIBCOM_NIM9090MD 0x2384 +#define USB_PID_DPOSH_M9206_COLD 0x9206 +#define USB_PID_DPOSH_M9206_WARM 0xa090 +#define USB_PID_E3C_EC168 0x1689 +#define USB_PID_E3C_EC168_2 0xfffa +#define USB_PID_E3C_EC168_3 0xfffb +#define USB_PID_E3C_EC168_4 0x1001 +#define USB_PID_E3C_EC168_5 0x1002 +#define USB_PID_FREECOM_DVBT 0x0160 +#define USB_PID_FREECOM_DVBT_2 0x0161 +#define USB_PID_UNIWILL_STK7700P 0x6003 +#define USB_PID_GENIUS_TVGO_DVB_T03 0x4012 +#define USB_PID_GRANDTEC_DVBT_USB_COLD 0x0fa0 +#define USB_PID_GRANDTEC_DVBT_USB_WARM 0x0fa1 +#define USB_PID_GOTVIEW_SAT_HD 0x5456 +#define USB_PID_INTEL_CE9500 0x9500 +#define USB_PID_ITETECH_IT9135 0x9135 +#define USB_PID_ITETECH_IT9135_9005 0x9005 +#define USB_PID_ITETECH_IT9135_9006 0x9006 +#define USB_PID_ITETECH_IT9303 0x9306 +#define USB_PID_KWORLD_399U 0xe399 +#define USB_PID_KWORLD_399U_2 0xe400 +#define USB_PID_KWORLD_395U 0xe396 +#define USB_PID_KWORLD_395U_2 0xe39b +#define USB_PID_KWORLD_395U_3 0xe395 +#define USB_PID_KWORLD_395U_4 0xe39a +#define USB_PID_KWORLD_MC810 0xc810 +#define USB_PID_KWORLD_PC160_2T 0xc160 +#define USB_PID_KWORLD_PC160_T 0xc161 +#define USB_PID_KWORLD_UB383_T 0xe383 +#define USB_PID_KWORLD_UB499_2T_T09 0xe409 +#define USB_PID_KWORLD_VSTREAM_COLD 0x17de +#define USB_PID_KWORLD_VSTREAM_WARM 0x17df +#define USB_PID_PROF_1100 0xb012 +#define USB_PID_TERRATEC_CINERGY_S 0x0064 +#define USB_PID_TERRATEC_CINERGY_T_USB_XE 0x0055 +#define USB_PID_TERRATEC_CINERGY_T_USB_XE_REV2 0x0069 +#define USB_PID_TERRATEC_CINERGY_T_STICK 0x0093 +#define USB_PID_TERRATEC_CINERGY_T_STICK_RC 0x0097 +#define USB_PID_TERRATEC_CINERGY_T_STICK_DUAL_RC 0x0099 +#define USB_PID_TERRATEC_CINERGY_T_STICK_BLACK_REV1 0x00a9 +#define USB_PID_TWINHAN_VP7041_COLD 0x3201 +#define USB_PID_TWINHAN_VP7041_WARM 0x3202 +#define USB_PID_TWINHAN_VP7020_COLD 0x3203 +#define USB_PID_TWINHAN_VP7020_WARM 0x3204 +#define USB_PID_TWINHAN_VP7045_COLD 0x3205 +#define USB_PID_TWINHAN_VP7045_WARM 0x3206 +#define USB_PID_TWINHAN_VP7021_COLD 0x3207 +#define USB_PID_TWINHAN_VP7021_WARM 0x3208 +#define USB_PID_TWINHAN_VP7049 0x3219 +#define USB_PID_TINYTWIN 0x3226 +#define USB_PID_TINYTWIN_2 0xe402 +#define USB_PID_TINYTWIN_3 0x9016 +#define USB_PID_DNTV_TINYUSB2_COLD 0x3223 +#define USB_PID_DNTV_TINYUSB2_WARM 0x3224 +#define USB_PID_ULTIMA_TVBOX_COLD 0x8105 +#define USB_PID_ULTIMA_TVBOX_WARM 0x8106 +#define USB_PID_ULTIMA_TVBOX_AN2235_COLD 0x8107 +#define USB_PID_ULTIMA_TVBOX_AN2235_WARM 0x8108 +#define USB_PID_ULTIMA_TVBOX_ANCHOR_COLD 0x2235 +#define USB_PID_ULTIMA_TVBOX_USB2_COLD 0x8109 +#define USB_PID_ULTIMA_TVBOX_USB2_WARM 0x810a +#define USB_PID_ARTEC_T14_COLD 0x810b +#define USB_PID_ARTEC_T14_WARM 0x810c +#define USB_PID_ARTEC_T14BR 0x810f +#define USB_PID_ULTIMA_TVBOX_USB2_FX_COLD 0x8613 +#define USB_PID_ULTIMA_TVBOX_USB2_FX_WARM 0x1002 +#define USB_PID_UNK_HYPER_PALTEK_COLD 0x005e +#define USB_PID_UNK_HYPER_PALTEK_WARM 0x005f +#define USB_PID_HANFTEK_UMT_010_COLD 0x0001 +#define USB_PID_HANFTEK_UMT_010_WARM 0x0015 +#define USB_PID_DTT200U_COLD 0x0201 +#define USB_PID_DTT200U_WARM 0x0301 +#define USB_PID_WT220U_ZAP250_COLD 0x0220 +#define USB_PID_WT220U_COLD 0x0222 +#define USB_PID_WT220U_WARM 0x0221 +#define USB_PID_WT220U_FC_COLD 0x0225 +#define USB_PID_WT220U_FC_WARM 0x0226 +#define USB_PID_WT220U_ZL0353_COLD 0x022a +#define USB_PID_WT220U_ZL0353_WARM 0x022b +#define USB_PID_WINTV_NOVA_T_USB2_COLD 0x9300 +#define USB_PID_WINTV_NOVA_T_USB2_WARM 0x9301 +#define USB_PID_HAUPPAUGE_NOVA_T_500 0x9941 +#define USB_PID_HAUPPAUGE_NOVA_T_500_2 0x9950 +#define USB_PID_HAUPPAUGE_NOVA_T_500_3 0x8400 +#define USB_PID_HAUPPAUGE_NOVA_T_STICK 0x7050 +#define USB_PID_HAUPPAUGE_NOVA_T_STICK_2 0x7060 +#define USB_PID_HAUPPAUGE_NOVA_T_STICK_3 0x7070 +#define USB_PID_HAUPPAUGE_MYTV_T 0x7080 +#define USB_PID_HAUPPAUGE_NOVA_TD_STICK 0x9580 +#define USB_PID_HAUPPAUGE_NOVA_TD_STICK_52009 0x5200 +#define USB_PID_HAUPPAUGE_TIGER_ATSC 0xb200 +#define USB_PID_HAUPPAUGE_TIGER_ATSC_B210 0xb210 +#define USB_PID_AVERMEDIA_EXPRESS 0xb568 +#define USB_PID_AVERMEDIA_VOLAR 0xa807 +#define USB_PID_AVERMEDIA_VOLAR_2 0xb808 +#define USB_PID_AVERMEDIA_VOLAR_A868R 0xa868 +#define USB_PID_AVERMEDIA_MCE_USB_M038 0x1228 +#define USB_PID_AVERMEDIA_HYBRID_ULTRA_USB_M039R 0x0039 +#define USB_PID_AVERMEDIA_HYBRID_ULTRA_USB_M039R_ATSC 0x1039 +#define USB_PID_AVERMEDIA_HYBRID_ULTRA_USB_M039R_DVBT 0x2039 +#define USB_PID_AVERMEDIA_VOLAR_X 0xa815 +#define USB_PID_AVERMEDIA_VOLAR_X_2 0x8150 +#define USB_PID_AVERMEDIA_A309 0xa309 +#define USB_PID_AVERMEDIA_A310 0xa310 +#define USB_PID_AVERMEDIA_A850 0x850a +#define USB_PID_AVERMEDIA_A850T 0x850b +#define USB_PID_AVERMEDIA_A805 0xa805 +#define USB_PID_AVERMEDIA_A815M 0x815a +#define USB_PID_AVERMEDIA_A835 0xa835 +#define USB_PID_AVERMEDIA_B835 0xb835 +#define USB_PID_AVERMEDIA_A835B_1835 0x1835 +#define USB_PID_AVERMEDIA_A835B_2835 0x2835 +#define USB_PID_AVERMEDIA_A835B_3835 0x3835 +#define USB_PID_AVERMEDIA_A835B_4835 0x4835 +#define USB_PID_AVERMEDIA_1867 0x1867 +#define USB_PID_AVERMEDIA_A867 0xa867 +#define USB_PID_AVERMEDIA_H335 0x0335 +#define USB_PID_AVERMEDIA_TD110 0xa110 +#define USB_PID_AVERMEDIA_TWINSTAR 0x0825 +#define USB_PID_TECHNOTREND_CONNECT_S2400 0x3006 +#define USB_PID_TECHNOTREND_CONNECT_S2400_8KEEPROM 0x3009 +#define USB_PID_TECHNOTREND_CONNECT_CT3650 0x300d +#define USB_PID_TECHNOTREND_CONNECT_S2_4600 0x3011 +#define USB_PID_TECHNOTREND_CONNECT_CT2_4650_CI 0x3012 +#define USB_PID_TECHNOTREND_CONNECT_CT2_4650_CI_2 0x3015 +#define USB_PID_TECHNOTREND_TVSTICK_CT2_4400 0x3014 +#define USB_PID_TECHNOTREND_CONNECT_S2_4650_CI 0x3017 +#define USB_PID_TERRATEC_CINERGY_DT_XS_DIVERSITY 0x005a +#define USB_PID_TERRATEC_CINERGY_DT_XS_DIVERSITY_2 0x0081 +#define USB_PID_TERRATEC_CINERGY_HT_USB_XE 0x0058 +#define USB_PID_TERRATEC_CINERGY_HT_EXPRESS 0x0060 +#define USB_PID_TERRATEC_CINERGY_T_EXPRESS 0x0062 +#define USB_PID_TERRATEC_CINERGY_T_XXS 0x0078 +#define USB_PID_TERRATEC_CINERGY_T_XXS_2 0x00ab +#define USB_PID_TERRATEC_CINERGY_S2_R1 0x00a8 +#define USB_PID_TERRATEC_CINERGY_S2_R2 0x00b0 +#define USB_PID_TERRATEC_CINERGY_S2_R3 0x0102 +#define USB_PID_TERRATEC_CINERGY_S2_R4 0x0105 +#define USB_PID_TERRATEC_H7 0x10b4 +#define USB_PID_TERRATEC_H7_2 0x10a3 +#define USB_PID_TERRATEC_H7_3 0x10a5 +#define USB_PID_TERRATEC_T1 0x10ae +#define USB_PID_TERRATEC_T3 0x10a0 +#define USB_PID_TERRATEC_T5 0x10a1 +#define USB_PID_NOXON_DAB_STICK 0x00b3 +#define USB_PID_NOXON_DAB_STICK_REV2 0x00e0 +#define USB_PID_NOXON_DAB_STICK_REV3 0x00b4 +#define USB_PID_PINNACLE_EXPRESSCARD_320CX 0x022e +#define USB_PID_PINNACLE_PCTV2000E 0x022c +#define USB_PID_PINNACLE_PCTV_DVB_T_FLASH 0x0228 +#define USB_PID_PINNACLE_PCTV_DUAL_DIVERSITY_DVB_T 0x0229 +#define USB_PID_PINNACLE_PCTV71E 0x022b +#define USB_PID_PINNACLE_PCTV72E 0x0236 +#define USB_PID_PINNACLE_PCTV73E 0x0237 +#define USB_PID_PINNACLE_PCTV310E 0x3211 +#define USB_PID_PINNACLE_PCTV801E 0x023a +#define USB_PID_PINNACLE_PCTV801E_SE 0x023b +#define USB_PID_PINNACLE_PCTV340E 0x023d +#define USB_PID_PINNACLE_PCTV340E_SE 0x023e +#define USB_PID_PINNACLE_PCTV73A 0x0243 +#define USB_PID_PINNACLE_PCTV73ESE 0x0245 +#define USB_PID_PINNACLE_PCTV74E 0x0246 +#define USB_PID_PINNACLE_PCTV282E 0x0248 +#define USB_PID_PIXELVIEW_SBTVD 0x5010 +#define USB_PID_PCTV_200E 0x020e +#define USB_PID_PCTV_400E 0x020f +#define USB_PID_PCTV_450E 0x0222 +#define USB_PID_PCTV_452E 0x021f +#define USB_PID_PCTV_78E 0x025a +#define USB_PID_PCTV_79E 0x0262 +#define USB_PID_REALTEK_RTL2831U 0x2831 +#define USB_PID_REALTEK_RTL2832U 0x2832 +#define USB_PID_TECHNOTREND_CONNECT_S2_3600 0x3007 +#define USB_PID_TECHNOTREND_CONNECT_S2_3650_CI 0x300a +#define USB_PID_NEBULA_DIGITV 0x0201 +#define USB_PID_DVICO_BLUEBIRD_LGDT 0xd820 +#define USB_PID_DVICO_BLUEBIRD_LG064F_COLD 0xd500 +#define USB_PID_DVICO_BLUEBIRD_LG064F_WARM 0xd501 +#define USB_PID_DVICO_BLUEBIRD_LGZ201_COLD 0xdb00 +#define USB_PID_DVICO_BLUEBIRD_LGZ201_WARM 0xdb01 +#define USB_PID_DVICO_BLUEBIRD_TH7579_COLD 0xdb10 +#define USB_PID_DVICO_BLUEBIRD_TH7579_WARM 0xdb11 +#define USB_PID_DVICO_BLUEBIRD_DUAL_1_COLD 0xdb50 +#define USB_PID_DVICO_BLUEBIRD_DUAL_1_WARM 0xdb51 +#define USB_PID_DVICO_BLUEBIRD_DUAL_2_COLD 0xdb58 +#define USB_PID_DVICO_BLUEBIRD_DUAL_2_WARM 0xdb59 +#define USB_PID_DVICO_BLUEBIRD_DUAL_4 0xdb78 +#define USB_PID_DVICO_BLUEBIRD_DUAL_4_REV_2 0xdb98 +#define USB_PID_DVICO_BLUEBIRD_DVB_T_NANO_2 0xdb70 +#define USB_PID_DVICO_BLUEBIRD_DVB_T_NANO_2_NFW_WARM 0xdb71 +#define USB_PID_DIGITALNOW_BLUEBIRD_DUAL_1_COLD 0xdb54 +#define USB_PID_DIGITALNOW_BLUEBIRD_DUAL_1_WARM 0xdb55 +#define USB_PID_MEDION_MD95700 0x0932 +#define USB_PID_MSI_MEGASKY580 0x5580 +#define USB_PID_MSI_MEGASKY580_55801 0x5581 +#define USB_PID_KYE_DVB_T_COLD 0x701e +#define USB_PID_KYE_DVB_T_WARM 0x701f +#define USB_PID_LITEON_DVB_T_COLD 0xf000 +#define USB_PID_LITEON_DVB_T_WARM 0xf001 +#define USB_PID_DIGIVOX_MINI_SL_COLD 0xe360 +#define USB_PID_DIGIVOX_MINI_SL_WARM 0xe361 +#define USB_PID_GRANDTEC_DVBT_USB2_COLD 0x0bc6 +#define USB_PID_GRANDTEC_DVBT_USB2_WARM 0x0bc7 +#define USB_PID_WINFAST_DTV2000DS 0x6a04 +#define USB_PID_WINFAST_DTV2000DS_PLUS 0x6f12 +#define USB_PID_WINFAST_DTV_DONGLE_COLD 0x6025 +#define USB_PID_WINFAST_DTV_DONGLE_WARM 0x6026 +#define USB_PID_WINFAST_DTV_DONGLE_STK7700P 0x6f00 +#define USB_PID_WINFAST_DTV_DONGLE_H 0x60f6 +#define USB_PID_WINFAST_DTV_DONGLE_STK7700P_2 0x6f01 +#define USB_PID_WINFAST_DTV_DONGLE_GOLD 0x6029 +#define USB_PID_WINFAST_DTV_DONGLE_MINID 0x6f0f +#define USB_PID_GENPIX_8PSK_REV_1_COLD 0x0200 +#define USB_PID_GENPIX_8PSK_REV_1_WARM 0x0201 +#define USB_PID_GENPIX_8PSK_REV_2 0x0202 +#define USB_PID_GENPIX_SKYWALKER_1 0x0203 +#define USB_PID_GENPIX_SKYWALKER_CW3K 0x0204 +#define USB_PID_GENPIX_SKYWALKER_2 0x0206 +#define USB_PID_SIGMATEK_DVB_110 0x6610 +#define USB_PID_MSI_DIGI_VOX_MINI_II 0x1513 +#define USB_PID_MSI_DIGIVOX_DUO 0x8801 +#define USB_PID_OPERA1_COLD 0x2830 +#define USB_PID_OPERA1_WARM 0x3829 +#define USB_PID_LIFEVIEW_TV_WALKER_TWIN_COLD 0x0514 +#define USB_PID_LIFEVIEW_TV_WALKER_TWIN_WARM 0x0513 +#define USB_PID_GIGABYTE_U7000 0x7001 +#define USB_PID_GIGABYTE_U8000 0x7002 +#define USB_PID_ASUS_U3000 0x171f +#define USB_PID_ASUS_U3000H 0x1736 +#define USB_PID_ASUS_U3100 0x173f +#define USB_PID_ASUS_U3100MINI_PLUS 0x1779 +#define USB_PID_YUAN_EC372S 0x1edc +#define USB_PID_YUAN_STK7700PH 0x1f08 +#define USB_PID_YUAN_PD378S 0x2edc +#define USB_PID_YUAN_MC770 0x0871 +#define USB_PID_YUAN_STK7700D 0x1efc +#define USB_PID_YUAN_STK7700D_2 0x1e8c +#define USB_PID_DW2102 0x2102 +#define USB_PID_DW2104 0x2104 +#define USB_PID_DW3101 0x3101 +#define USB_PID_XTENSIONS_XD_380 0x0381 +#define USB_PID_TELESTAR_STARSTICK_2 0x8000 +#define USB_PID_MSI_DIGI_VOX_MINI_III 0x8807 +#define USB_PID_SONY_PLAYTV 0x0003 +#define USB_PID_MYGICA_D689 0xd811 +#define USB_PID_MYGICA_T230 0xc688 +#define USB_PID_MYGICA_T230C 0xc689 +#define USB_PID_ELGATO_EYETV_DIVERSITY 0x0011 +#define USB_PID_ELGATO_EYETV_DTT 0x0021 +#define USB_PID_ELGATO_EYETV_DTT_2 0x003f +#define USB_PID_ELGATO_EYETV_DTT_Dlx 0x0020 +#define USB_PID_ELGATO_EYETV_SAT 0x002a +#define USB_PID_ELGATO_EYETV_SAT_V2 0x0025 +#define USB_PID_ELGATO_EYETV_SAT_V3 0x0036 +#define USB_PID_DVB_T_USB_STICK_HIGH_SPEED_COLD 0x5000 +#define USB_PID_DVB_T_USB_STICK_HIGH_SPEED_WARM 0x5001 +#define USB_PID_FRIIO_WHITE 0x0001 +#define USB_PID_TVWAY_PLUS 0x0002 +#define USB_PID_SVEON_STV20 0xe39d +#define USB_PID_SVEON_STV20_RTL2832U 0xd39d +#define USB_PID_SVEON_STV21 0xd3b0 +#define USB_PID_SVEON_STV22 0xe401 +#define USB_PID_SVEON_STV22_IT9137 0xe411 +#define USB_PID_AZUREWAVE_AZ6027 0x3275 +#define USB_PID_TERRATEC_DVBS2CI_V1 0x10a4 +#define USB_PID_TERRATEC_DVBS2CI_V2 0x10ac +#define USB_PID_TECHNISAT_USB2_HDCI_V1 0x0001 +#define USB_PID_TECHNISAT_USB2_HDCI_V2 0x0002 +#define USB_PID_TECHNISAT_USB2_CABLESTAR_HDCI 0x0003 +#define USB_PID_TECHNISAT_AIRSTAR_TELESTICK_2 0x0004 +#define USB_PID_TECHNISAT_USB2_DVB_S2 0x0500 +#define USB_PID_CPYTO_REDI_PC50A 0xa803 +#define USB_PID_CTVDIGDUAL_V2 0xe410 +#define USB_PID_PCTV_2002E 0x025c +#define USB_PID_PCTV_2002E_SE 0x025d +#define USB_PID_SVEON_STV27 0xd3af +#define USB_PID_TURBOX_DTT_2000 0xd3a4 +#define USB_PID_WINTV_SOLOHD 0x0264 +#define USB_PID_EVOLVEO_XTRATV_STICK 0xa115 +#define USB_PID_HAMA_DVBT_HYBRID 0x2758 +#define USB_PID_XBOX_ONE_TUNER 0x02d5 +#endif diff --git a/include/media/dvb_ca_en50221.h b/include/media/dvb_ca_en50221.h new file mode 100644 index 000000000000..a1c014b0a837 --- /dev/null +++ b/include/media/dvb_ca_en50221.h @@ -0,0 +1,142 @@ +/* + * dvb_ca.h: generic DVB functions for EN50221 CA interfaces + * + * Copyright (C) 2004 Andrew de Quincey + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public License + * as published by the Free Software Foundation; either version 2.1 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _DVB_CA_EN50221_H_ +#define _DVB_CA_EN50221_H_ + +#include <linux/list.h> +#include <linux/dvb/ca.h> + +#include <media/dvbdev.h> + +#define DVB_CA_EN50221_POLL_CAM_PRESENT 1 +#define DVB_CA_EN50221_POLL_CAM_CHANGED 2 +#define DVB_CA_EN50221_POLL_CAM_READY 4 + +#define DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE 1 +#define DVB_CA_EN50221_FLAG_IRQ_FR 2 +#define DVB_CA_EN50221_FLAG_IRQ_DA 4 + +#define DVB_CA_EN50221_CAMCHANGE_REMOVED 0 +#define DVB_CA_EN50221_CAMCHANGE_INSERTED 1 + +/** + * struct dvb_ca_en50221- Structure describing a CA interface + * + * @owner: the module owning this structure + * @read_attribute_mem: function for reading attribute memory on the CAM + * @write_attribute_mem: function for writing attribute memory on the CAM + * @read_cam_control: function for reading the control interface on the CAM + * @write_cam_control: function for reading the control interface on the CAM + * @read_data: function for reading data (block mode) + * @write_data: function for writing data (block mode) + * @slot_reset: function to reset the CAM slot + * @slot_shutdown: function to shutdown a CAM slot + * @slot_ts_enable: function to enable the Transport Stream on a CAM slot + * @poll_slot_status: function to poll slot status. Only necessary if + * DVB_CA_FLAG_EN50221_IRQ_CAMCHANGE is not set. + * @data: private data, used by caller. + * @private: Opaque data used by the dvb_ca core. Do not modify! + * + * NOTE: the read_*, write_* and poll_slot_status functions will be + * called for different slots concurrently and need to use locks where + * and if appropriate. There will be no concurrent access to one slot. + */ +struct dvb_ca_en50221 { + struct module *owner; + + int (*read_attribute_mem)(struct dvb_ca_en50221 *ca, + int slot, int address); + int (*write_attribute_mem)(struct dvb_ca_en50221 *ca, + int slot, int address, u8 value); + + int (*read_cam_control)(struct dvb_ca_en50221 *ca, + int slot, u8 address); + int (*write_cam_control)(struct dvb_ca_en50221 *ca, + int slot, u8 address, u8 value); + + int (*read_data)(struct dvb_ca_en50221 *ca, + int slot, u8 *ebuf, int ecount); + int (*write_data)(struct dvb_ca_en50221 *ca, + int slot, u8 *ebuf, int ecount); + + int (*slot_reset)(struct dvb_ca_en50221 *ca, int slot); + int (*slot_shutdown)(struct dvb_ca_en50221 *ca, int slot); + int (*slot_ts_enable)(struct dvb_ca_en50221 *ca, int slot); + + int (*poll_slot_status)(struct dvb_ca_en50221 *ca, int slot, int open); + + void *data; + + void *private; +}; + +/* + * Functions for reporting IRQ events + */ + +/** + * dvb_ca_en50221_camchange_irq - A CAMCHANGE IRQ has occurred. + * + * @pubca: CA instance. + * @slot: Slot concerned. + * @change_type: One of the DVB_CA_CAMCHANGE_* values + */ +void dvb_ca_en50221_camchange_irq(struct dvb_ca_en50221 *pubca, int slot, + int change_type); + +/** + * dvb_ca_en50221_camready_irq - A CAMREADY IRQ has occurred. + * + * @pubca: CA instance. + * @slot: Slot concerned. + */ +void dvb_ca_en50221_camready_irq(struct dvb_ca_en50221 *pubca, int slot); + +/** + * dvb_ca_en50221_frda_irq - An FR or a DA IRQ has occurred. + * + * @ca: CA instance. + * @slot: Slot concerned. + */ +void dvb_ca_en50221_frda_irq(struct dvb_ca_en50221 *ca, int slot); + +/* + * Initialisation/shutdown functions + */ + +/** + * dvb_ca_en50221_init - Initialise a new DVB CA device. + * + * @dvb_adapter: DVB adapter to attach the new CA device to. + * @ca: The dvb_ca instance. + * @flags: Flags describing the CA device (DVB_CA_EN50221_FLAG_*). + * @slot_count: Number of slots supported. + * + * @return 0 on success, nonzero on failure + */ +int dvb_ca_en50221_init(struct dvb_adapter *dvb_adapter, + struct dvb_ca_en50221 *ca, int flags, + int slot_count); + +/** + * dvb_ca_en50221_release - Release a DVB CA device. + * + * @ca: The associated dvb_ca instance. + */ +void dvb_ca_en50221_release(struct dvb_ca_en50221 *ca); + +#endif diff --git a/include/media/dvb_demux.h b/include/media/dvb_demux.h new file mode 100644 index 000000000000..b07092038f4b --- /dev/null +++ b/include/media/dvb_demux.h @@ -0,0 +1,350 @@ +/* + * dvb_demux.h: DVB kernel demux API + * + * Copyright (C) 2000-2001 Marcus Metzler & Ralph Metzler + * for convergence integrated media GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public License + * as published by the Free Software Foundation; either version 2.1 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef _DVB_DEMUX_H_ +#define _DVB_DEMUX_H_ + +#include <linux/time.h> +#include <linux/timer.h> +#include <linux/spinlock.h> +#include <linux/mutex.h> + +#include <media/demux.h> + +/** + * enum dvb_dmx_filter_type - type of demux feed. + * + * @DMX_TYPE_TS: feed is in TS mode. + * @DMX_TYPE_SEC: feed is in Section mode. + */ +enum dvb_dmx_filter_type { + DMX_TYPE_TS, + DMX_TYPE_SEC, +}; + +/** + * enum dvb_dmx_state - state machine for a demux filter. + * + * @DMX_STATE_FREE: indicates that the filter is freed. + * @DMX_STATE_ALLOCATED: indicates that the filter was allocated + * to be used. + * @DMX_STATE_READY: indicates that the filter is ready + * to be used. + * @DMX_STATE_GO: indicates that the filter is running. + */ +enum dvb_dmx_state { + DMX_STATE_FREE, + DMX_STATE_ALLOCATED, + DMX_STATE_READY, + DMX_STATE_GO, +}; + +#define DVB_DEMUX_MASK_MAX 18 + +#define MAX_PID 0x1fff + +#define SPEED_PKTS_INTERVAL 50000 + +/** + * struct dvb_demux_filter - Describes a DVB demux section filter. + * + * @filter: Section filter as defined by &struct dmx_section_filter. + * @maskandmode: logical ``and`` bit mask. + * @maskandnotmode: logical ``and not`` bit mask. + * @doneq: flag that indicates when a filter is ready. + * @next: pointer to the next section filter. + * @feed: &struct dvb_demux_feed pointer. + * @index: index of the used demux filter. + * @state: state of the filter as described by &enum dvb_dmx_state. + * @type: type of the filter as described + * by &enum dvb_dmx_filter_type. + */ + +struct dvb_demux_filter { + struct dmx_section_filter filter; + u8 maskandmode[DMX_MAX_FILTER_SIZE]; + u8 maskandnotmode[DMX_MAX_FILTER_SIZE]; + bool doneq; + + struct dvb_demux_filter *next; + struct dvb_demux_feed *feed; + int index; + enum dvb_dmx_state state; + enum dvb_dmx_filter_type type; + + /* private: used only by av7110 */ + u16 hw_handle; +}; + +/** + * struct dvb_demux_feed - describes a DVB field + * + * @feed: a union describing a digital TV feed. + * Depending on the feed type, it can be either + * @feed.ts or @feed.sec. + * @feed.ts: a &struct dmx_ts_feed pointer. + * For TS feed only. + * @feed.sec: a &struct dmx_section_feed pointer. + * For section feed only. + * @cb: a union describing digital TV callbacks. + * Depending on the feed type, it can be either + * @cb.ts or @cb.sec. + * @cb.ts: a dmx_ts_cb() calback function pointer. + * For TS feed only. + * @cb.sec: a dmx_section_cb() callback function pointer. + * For section feed only. + * @demux: pointer to &struct dvb_demux. + * @priv: private data that can optionally be used by a DVB driver. + * @type: type of the filter, as defined by &enum dvb_dmx_filter_type. + * @state: state of the filter as defined by &enum dvb_dmx_state. + * @pid: PID to be filtered. + * @timeout: feed timeout. + * @filter: pointer to &struct dvb_demux_filter. + * @ts_type: type of TS, as defined by &enum ts_filter_type. + * @pes_type: type of PES, as defined by &enum dmx_ts_pes. + * @cc: MPEG-TS packet continuity counter + * @pusi_seen: if true, indicates that a discontinuity was detected. + * it is used to prevent feeding of garbage from previous section. + * @peslen: length of the PES (Packet Elementary Stream). + * @list_head: head for the list of digital TV demux feeds. + * @index: a unique index for each feed. Can be used as hardware + * pid filter index. + */ +struct dvb_demux_feed { + union { + struct dmx_ts_feed ts; + struct dmx_section_feed sec; + } feed; + + union { + dmx_ts_cb ts; + dmx_section_cb sec; + } cb; + + struct dvb_demux *demux; + void *priv; + enum dvb_dmx_filter_type type; + enum dvb_dmx_state state; + u16 pid; + + ktime_t timeout; + struct dvb_demux_filter *filter; + + enum ts_filter_type ts_type; + enum dmx_ts_pes pes_type; + + int cc; + bool pusi_seen; + + u16 peslen; + + struct list_head list_head; + unsigned int index; +}; + +/** + * struct dvb_demux - represents a digital TV demux + * @dmx: embedded &struct dmx_demux with demux capabilities + * and callbacks. + * @priv: private data that can optionally be used by + * a DVB driver. + * @filternum: maximum amount of DVB filters. + * @feednum: maximum amount of DVB feeds. + * @start_feed: callback routine to be called in order to start + * a DVB feed. + * @stop_feed: callback routine to be called in order to stop + * a DVB feed. + * @write_to_decoder: callback routine to be called if the feed is TS and + * it is routed to an A/V decoder, when a new TS packet + * is received. + * Used only on av7110-av.c. + * @check_crc32: callback routine to check CRC. If not initialized, + * dvb_demux will use an internal one. + * @memcopy: callback routine to memcopy received data. + * If not initialized, dvb_demux will default to memcpy(). + * @users: counter for the number of demux opened file descriptors. + * Currently, it is limited to 10 users. + * @filter: pointer to &struct dvb_demux_filter. + * @feed: pointer to &struct dvb_demux_feed. + * @frontend_list: &struct list_head with frontends used by the demux. + * @pesfilter: array of &struct dvb_demux_feed with the PES types + * that will be filtered. + * @pids: list of filtered program IDs. + * @feed_list: &struct list_head with feeds. + * @tsbuf: temporary buffer used internally to store TS packets. + * @tsbufp: temporary buffer index used internally. + * @mutex: pointer to &struct mutex used to protect feed set + * logic. + * @lock: pointer to &spinlock_t, used to protect buffer handling. + * @cnt_storage: buffer used for TS/TEI continuity check. + * @speed_last_time: &ktime_t used for TS speed check. + * @speed_pkts_cnt: packets count used for TS speed check. + */ +struct dvb_demux { + struct dmx_demux dmx; + void *priv; + int filternum; + int feednum; + int (*start_feed)(struct dvb_demux_feed *feed); + int (*stop_feed)(struct dvb_demux_feed *feed); + int (*write_to_decoder)(struct dvb_demux_feed *feed, + const u8 *buf, size_t len); + u32 (*check_crc32)(struct dvb_demux_feed *feed, + const u8 *buf, size_t len); + void (*memcopy)(struct dvb_demux_feed *feed, u8 *dst, + const u8 *src, size_t len); + + int users; +#define MAX_DVB_DEMUX_USERS 10 + struct dvb_demux_filter *filter; + struct dvb_demux_feed *feed; + + struct list_head frontend_list; + + struct dvb_demux_feed *pesfilter[DMX_PES_OTHER]; + u16 pids[DMX_PES_OTHER]; + +#define DMX_MAX_PID 0x2000 + struct list_head feed_list; + u8 tsbuf[204]; + int tsbufp; + + struct mutex mutex; + spinlock_t lock; + + uint8_t *cnt_storage; /* for TS continuity check */ + + ktime_t speed_last_time; /* for TS speed check */ + uint32_t speed_pkts_cnt; /* for TS speed check */ + + /* private: used only on av7110 */ + int playing; + int recording; +}; + +/** + * dvb_dmx_init - initialize a digital TV demux struct. + * + * @demux: &struct dvb_demux to be initialized. + * + * Before being able to register a digital TV demux struct, drivers + * should call this routine. On its typical usage, some fields should + * be initialized at the driver before calling it. + * + * A typical usecase is:: + * + * dvb->demux.dmx.capabilities = + * DMX_TS_FILTERING | DMX_SECTION_FILTERING | + * DMX_MEMORY_BASED_FILTERING; + * dvb->demux.priv = dvb; + * dvb->demux.filternum = 256; + * dvb->demux.feednum = 256; + * dvb->demux.start_feed = driver_start_feed; + * dvb->demux.stop_feed = driver_stop_feed; + * ret = dvb_dmx_init(&dvb->demux); + * if (ret < 0) + * return ret; + */ +int dvb_dmx_init(struct dvb_demux *demux); + +/** + * dvb_dmx_release - releases a digital TV demux internal buffers. + * + * @demux: &struct dvb_demux to be released. + * + * The DVB core internally allocates data at @demux. This routine + * releases those data. Please notice that the struct itelf is not + * released, as it can be embedded on other structs. + */ +void dvb_dmx_release(struct dvb_demux *demux); + +/** + * dvb_dmx_swfilter_packets - use dvb software filter for a buffer with + * multiple MPEG-TS packets with 188 bytes each. + * + * @demux: pointer to &struct dvb_demux + * @buf: buffer with data to be filtered + * @count: number of MPEG-TS packets with size of 188. + * + * The routine will discard a DVB packet that don't start with 0x47. + * + * Use this routine if the DVB demux fills MPEG-TS buffers that are + * already aligned. + * + * NOTE: The @buf size should have size equal to ``count * 188``. + */ +void dvb_dmx_swfilter_packets(struct dvb_demux *demux, const u8 *buf, + size_t count); + +/** + * dvb_dmx_swfilter - use dvb software filter for a buffer with + * multiple MPEG-TS packets with 188 bytes each. + * + * @demux: pointer to &struct dvb_demux + * @buf: buffer with data to be filtered + * @count: number of MPEG-TS packets with size of 188. + * + * If a DVB packet doesn't start with 0x47, it will seek for the first + * byte that starts with 0x47. + * + * Use this routine if the DVB demux fill buffers that may not start with + * a packet start mark (0x47). + * + * NOTE: The @buf size should have size equal to ``count * 188``. + */ +void dvb_dmx_swfilter(struct dvb_demux *demux, const u8 *buf, size_t count); + +/** + * dvb_dmx_swfilter_204 - use dvb software filter for a buffer with + * multiple MPEG-TS packets with 204 bytes each. + * + * @demux: pointer to &struct dvb_demux + * @buf: buffer with data to be filtered + * @count: number of MPEG-TS packets with size of 204. + * + * If a DVB packet doesn't start with 0x47, it will seek for the first + * byte that starts with 0x47. + * + * Use this routine if the DVB demux fill buffers that may not start with + * a packet start mark (0x47). + * + * NOTE: The @buf size should have size equal to ``count * 204``. + */ +void dvb_dmx_swfilter_204(struct dvb_demux *demux, const u8 *buf, + size_t count); + +/** + * dvb_dmx_swfilter_raw - make the raw data available to userspace without + * filtering + * + * @demux: pointer to &struct dvb_demux + * @buf: buffer with data + * @count: number of packets to be passed. The actual size of each packet + * depends on the &dvb_demux->feed->cb.ts logic. + * + * Use it if the driver needs to deliver the raw payload to userspace without + * passing through the kernel demux. That is meant to support some + * delivery systems that aren't based on MPEG-TS. + * + * This function relies on &dvb_demux->feed->cb.ts to actually handle the + * buffer. + */ +void dvb_dmx_swfilter_raw(struct dvb_demux *demux, const u8 *buf, + size_t count); + +#endif /* _DVB_DEMUX_H_ */ diff --git a/include/media/dvb_frontend.h b/include/media/dvb_frontend.h new file mode 100644 index 000000000000..0b40886fd7d3 --- /dev/null +++ b/include/media/dvb_frontend.h @@ -0,0 +1,795 @@ +/* + * dvb_frontend.h + * + * The Digital TV Frontend kABI defines a driver-internal interface for + * registering low-level, hardware specific driver to a hardware independent + * frontend layer. + * + * Copyright (C) 2001 convergence integrated media GmbH + * Copyright (C) 2004 convergence GmbH + * + * Written by Ralph Metzler + * Overhauled by Holger Waechtler + * Kernel I2C stuff by Michael Hunold <hunold@convergence.de> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public License + * as published by the Free Software Foundation; either version 2.1 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + + * You should have received a copy of the GNU Lesser General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#ifndef _DVB_FRONTEND_H_ +#define _DVB_FRONTEND_H_ + +#include <linux/types.h> +#include <linux/sched.h> +#include <linux/ioctl.h> +#include <linux/i2c.h> +#include <linux/module.h> +#include <linux/errno.h> +#include <linux/delay.h> +#include <linux/mutex.h> +#include <linux/slab.h> + +#include <linux/dvb/frontend.h> + +#include <media/dvbdev.h> + +/* + * Maximum number of Delivery systems per frontend. It + * should be smaller or equal to 32 + */ +#define MAX_DELSYS 8 + +/** + * struct dvb_frontend_tune_settings - parameters to adjust frontend tuning + * + * @min_delay_ms: minimum delay for tuning, in ms + * @step_size: step size between two consecutive frequencies + * @max_drift: maximum drift + * + * NOTE: step_size is in Hz, for terrestrial/cable or kHz for satellite + */ +struct dvb_frontend_tune_settings { + int min_delay_ms; + int step_size; + int max_drift; +}; + +struct dvb_frontend; + +/** + * struct dvb_tuner_info - Frontend name and min/max ranges/bandwidths + * + * @name: name of the Frontend + * @frequency_min: minimal frequency supported + * @frequency_max: maximum frequency supported + * @frequency_step: frequency step + * @bandwidth_min: minimal frontend bandwidth supported + * @bandwidth_max: maximum frontend bandwidth supported + * @bandwidth_step: frontend bandwidth step + * + * NOTE: frequency parameters are in Hz, for terrestrial/cable or kHz for + * satellite. + */ +struct dvb_tuner_info { + char name[128]; + + u32 frequency_min; + u32 frequency_max; + u32 frequency_step; + + u32 bandwidth_min; + u32 bandwidth_max; + u32 bandwidth_step; +}; + +/** + * struct analog_parameters - Parameters to tune into an analog/radio channel + * + * @frequency: Frequency used by analog TV tuner (either in 62.5 kHz step, + * for TV, or 62.5 Hz for radio) + * @mode: Tuner mode, as defined on enum v4l2_tuner_type + * @audmode: Audio mode as defined for the rxsubchans field at videodev2.h, + * e. g. V4L2_TUNER_MODE_* + * @std: TV standard bitmap as defined at videodev2.h, e. g. V4L2_STD_* + * + * Hybrid tuners should be supported by both V4L2 and DVB APIs. This + * struct contains the data that are used by the V4L2 side. To avoid + * dependencies from V4L2 headers, all enums here are declared as integers. + */ +struct analog_parameters { + unsigned int frequency; + unsigned int mode; + unsigned int audmode; + u64 std; +}; + +/** + * enum dvbfe_algo - defines the algorithm used to tune into a channel + * + * @DVBFE_ALGO_HW: Hardware Algorithm - + * Devices that support this algorithm do everything in hardware + * and no software support is needed to handle them. + * Requesting these devices to LOCK is the only thing required, + * device is supposed to do everything in the hardware. + * + * @DVBFE_ALGO_SW: Software Algorithm - + * These are dumb devices, that require software to do everything + * + * @DVBFE_ALGO_CUSTOM: Customizable Agorithm - + * Devices having this algorithm can be customized to have specific + * algorithms in the frontend driver, rather than simply doing a + * software zig-zag. In this case the zigzag maybe hardware assisted + * or it maybe completely done in hardware. In all cases, usage of + * this algorithm, in conjunction with the search and track + * callbacks, utilizes the driver specific algorithm. + * + * @DVBFE_ALGO_RECOVERY: Recovery Algorithm - + * These devices have AUTO recovery capabilities from LOCK failure + */ +enum dvbfe_algo { + DVBFE_ALGO_HW = (1 << 0), + DVBFE_ALGO_SW = (1 << 1), + DVBFE_ALGO_CUSTOM = (1 << 2), + DVBFE_ALGO_RECOVERY = (1 << 31) +}; + +/** + * enum dvbfe_search - search callback possible return status + * + * @DVBFE_ALGO_SEARCH_SUCCESS: + * The frontend search algorithm completed and returned successfully + * + * @DVBFE_ALGO_SEARCH_ASLEEP: + * The frontend search algorithm is sleeping + * + * @DVBFE_ALGO_SEARCH_FAILED: + * The frontend search for a signal failed + * + * @DVBFE_ALGO_SEARCH_INVALID: + * The frontend search algorith was probably supplied with invalid + * parameters and the search is an invalid one + * + * @DVBFE_ALGO_SEARCH_ERROR: + * The frontend search algorithm failed due to some error + * + * @DVBFE_ALGO_SEARCH_AGAIN: + * The frontend search algorithm was requested to search again + */ +enum dvbfe_search { + DVBFE_ALGO_SEARCH_SUCCESS = (1 << 0), + DVBFE_ALGO_SEARCH_ASLEEP = (1 << 1), + DVBFE_ALGO_SEARCH_FAILED = (1 << 2), + DVBFE_ALGO_SEARCH_INVALID = (1 << 3), + DVBFE_ALGO_SEARCH_AGAIN = (1 << 4), + DVBFE_ALGO_SEARCH_ERROR = (1 << 31), +}; + +/** + * struct dvb_tuner_ops - Tuner information and callbacks + * + * @info: embedded &struct dvb_tuner_info with tuner properties + * @release: callback function called when frontend is detached. + * drivers should free any allocated memory. + * @init: callback function used to initialize the tuner device. + * @sleep: callback function used to put the tuner to sleep. + * @suspend: callback function used to inform that the Kernel will + * suspend. + * @resume: callback function used to inform that the Kernel is + * resuming from suspend. + * @set_params: callback function used to inform the tuner to tune + * into a digital TV channel. The properties to be used + * are stored at &struct dvb_frontend.dtv_property_cache. + * The tuner demod can change the parameters to reflect + * the changes needed for the channel to be tuned, and + * update statistics. This is the recommended way to set + * the tuner parameters and should be used on newer + * drivers. + * @set_analog_params: callback function used to tune into an analog TV + * channel on hybrid tuners. It passes @analog_parameters + * to the driver. + * @set_config: callback function used to send some tuner-specific + * parameters. + * @get_frequency: get the actual tuned frequency + * @get_bandwidth: get the bandwitdh used by the low pass filters + * @get_if_frequency: get the Intermediate Frequency, in Hz. For baseband, + * should return 0. + * @get_status: returns the frontend lock status + * @get_rf_strength: returns the RF signal strength. Used mostly to support + * analog TV and radio. Digital TV should report, instead, + * via DVBv5 API (&struct dvb_frontend.dtv_property_cache). + * @get_afc: Used only by analog TV core. Reports the frequency + * drift due to AFC. + * @calc_regs: callback function used to pass register data settings + * for simple tuners. Shouldn't be used on newer drivers. + * @set_frequency: Set a new frequency. Shouldn't be used on newer drivers. + * @set_bandwidth: Set a new frequency. Shouldn't be used on newer drivers. + * + * NOTE: frequencies used on @get_frequency and @set_frequency are in Hz for + * terrestrial/cable or kHz for satellite. + * + */ +struct dvb_tuner_ops { + + struct dvb_tuner_info info; + + void (*release)(struct dvb_frontend *fe); + int (*init)(struct dvb_frontend *fe); + int (*sleep)(struct dvb_frontend *fe); + int (*suspend)(struct dvb_frontend *fe); + int (*resume)(struct dvb_frontend *fe); + + /* This is the recomended way to set the tuner */ + int (*set_params)(struct dvb_frontend *fe); + int (*set_analog_params)(struct dvb_frontend *fe, struct analog_parameters *p); + + int (*set_config)(struct dvb_frontend *fe, void *priv_cfg); + + int (*get_frequency)(struct dvb_frontend *fe, u32 *frequency); + int (*get_bandwidth)(struct dvb_frontend *fe, u32 *bandwidth); + int (*get_if_frequency)(struct dvb_frontend *fe, u32 *frequency); + +#define TUNER_STATUS_LOCKED 1 +#define TUNER_STATUS_STEREO 2 + int (*get_status)(struct dvb_frontend *fe, u32 *status); + int (*get_rf_strength)(struct dvb_frontend *fe, u16 *strength); + int (*get_afc)(struct dvb_frontend *fe, s32 *afc); + + /* + * This is support for demods like the mt352 - fills out the supplied + * buffer with what to write. + * + * Don't use on newer drivers. + */ + int (*calc_regs)(struct dvb_frontend *fe, u8 *buf, int buf_len); + + /* + * These are provided separately from set_params in order to + * facilitate silicon tuners which require sophisticated tuning loops, + * controlling each parameter separately. + * + * Don't use on newer drivers. + */ + int (*set_frequency)(struct dvb_frontend *fe, u32 frequency); + int (*set_bandwidth)(struct dvb_frontend *fe, u32 bandwidth); +}; + +/** + * struct analog_demod_info - Information struct for analog TV part of the demod + * + * @name: Name of the analog TV demodulator + */ +struct analog_demod_info { + char *name; +}; + +/** + * struct analog_demod_ops - Demodulation information and callbacks for + * analog TV and radio + * + * @info: pointer to struct analog_demod_info + * @set_params: callback function used to inform the demod to set the + * demodulator parameters needed to decode an analog or + * radio channel. The properties are passed via + * &struct analog_params. + * @has_signal: returns 0xffff if has signal, or 0 if it doesn't. + * @get_afc: Used only by analog TV core. Reports the frequency + * drift due to AFC. + * @tuner_status: callback function that returns tuner status bits, e. g. + * %TUNER_STATUS_LOCKED and %TUNER_STATUS_STEREO. + * @standby: set the tuner to standby mode. + * @release: callback function called when frontend is detached. + * drivers should free any allocated memory. + * @i2c_gate_ctrl: controls the I2C gate. Newer drivers should use I2C + * mux support instead. + * @set_config: callback function used to send some tuner-specific + * parameters. + */ +struct analog_demod_ops { + + struct analog_demod_info info; + + void (*set_params)(struct dvb_frontend *fe, + struct analog_parameters *params); + int (*has_signal)(struct dvb_frontend *fe, u16 *signal); + int (*get_afc)(struct dvb_frontend *fe, s32 *afc); + void (*tuner_status)(struct dvb_frontend *fe); + void (*standby)(struct dvb_frontend *fe); + void (*release)(struct dvb_frontend *fe); + int (*i2c_gate_ctrl)(struct dvb_frontend *fe, int enable); + + /** This is to allow setting tuner-specific configuration */ + int (*set_config)(struct dvb_frontend *fe, void *priv_cfg); +}; + +struct dtv_frontend_properties; + + +/** + * struct dvb_frontend_ops - Demodulation information and callbacks for + * ditialt TV + * + * @info: embedded &struct dvb_tuner_info with tuner properties + * @delsys: Delivery systems supported by the frontend + * @detach: callback function called when frontend is detached. + * drivers should clean up, but not yet free the &struct + * dvb_frontend allocation. + * @release: callback function called when frontend is ready to be + * freed. + * drivers should free any allocated memory. + * @release_sec: callback function requesting that the Satelite Equipment + * Control (SEC) driver to release and free any memory + * allocated by the driver. + * @init: callback function used to initialize the tuner device. + * @sleep: callback function used to put the tuner to sleep. + * @write: callback function used by some demod legacy drivers to + * allow other drivers to write data into their registers. + * Should not be used on new drivers. + * @tune: callback function used by demod drivers that use + * @DVBFE_ALGO_HW to tune into a frequency. + * @get_frontend_algo: returns the desired hardware algorithm. + * @set_frontend: callback function used to inform the demod to set the + * parameters for demodulating a digital TV channel. + * The properties to be used are stored at &struct + * dvb_frontend.dtv_property_cache. The demod can change + * the parameters to reflect the changes needed for the + * channel to be decoded, and update statistics. + * @get_tune_settings: callback function + * @get_frontend: callback function used to inform the parameters + * actuall in use. The properties to be used are stored at + * &struct dvb_frontend.dtv_property_cache and update + * statistics. Please notice that it should not return + * an error code if the statistics are not available + * because the demog is not locked. + * @read_status: returns the locking status of the frontend. + * @read_ber: legacy callback function to return the bit error rate. + * Newer drivers should provide such info via DVBv5 API, + * e. g. @set_frontend;/@get_frontend, implementing this + * callback only if DVBv3 API compatibility is wanted. + * @read_signal_strength: legacy callback function to return the signal + * strength. Newer drivers should provide such info via + * DVBv5 API, e. g. @set_frontend/@get_frontend, + * implementing this callback only if DVBv3 API + * compatibility is wanted. + * @read_snr: legacy callback function to return the Signal/Noise + * rate. Newer drivers should provide such info via + * DVBv5 API, e. g. @set_frontend/@get_frontend, + * implementing this callback only if DVBv3 API + * compatibility is wanted. + * @read_ucblocks: legacy callback function to return the Uncorrected Error + * Blocks. Newer drivers should provide such info via + * DVBv5 API, e. g. @set_frontend/@get_frontend, + * implementing this callback only if DVBv3 API + * compatibility is wanted. + * @diseqc_reset_overload: callback function to implement the + * FE_DISEQC_RESET_OVERLOAD() ioctl (only Satellite) + * @diseqc_send_master_cmd: callback function to implement the + * FE_DISEQC_SEND_MASTER_CMD() ioctl (only Satellite). + * @diseqc_recv_slave_reply: callback function to implement the + * FE_DISEQC_RECV_SLAVE_REPLY() ioctl (only Satellite) + * @diseqc_send_burst: callback function to implement the + * FE_DISEQC_SEND_BURST() ioctl (only Satellite). + * @set_tone: callback function to implement the + * FE_SET_TONE() ioctl (only Satellite). + * @set_voltage: callback function to implement the + * FE_SET_VOLTAGE() ioctl (only Satellite). + * @enable_high_lnb_voltage: callback function to implement the + * FE_ENABLE_HIGH_LNB_VOLTAGE() ioctl (only Satellite). + * @dishnetwork_send_legacy_command: callback function to implement the + * FE_DISHNETWORK_SEND_LEGACY_CMD() ioctl (only Satellite). + * Drivers should not use this, except when the DVB + * core emulation fails to provide proper support (e.g. + * if @set_voltage takes more than 8ms to work), and + * when backward compatibility with this legacy API is + * required. + * @i2c_gate_ctrl: controls the I2C gate. Newer drivers should use I2C + * mux support instead. + * @ts_bus_ctrl: callback function used to take control of the TS bus. + * @set_lna: callback function to power on/off/auto the LNA. + * @search: callback function used on some custom algo search algos. + * @tuner_ops: pointer to &struct dvb_tuner_ops + * @analog_ops: pointer to &struct analog_demod_ops + */ +struct dvb_frontend_ops { + struct dvb_frontend_info info; + + u8 delsys[MAX_DELSYS]; + + void (*detach)(struct dvb_frontend *fe); + void (*release)(struct dvb_frontend* fe); + void (*release_sec)(struct dvb_frontend* fe); + + int (*init)(struct dvb_frontend* fe); + int (*sleep)(struct dvb_frontend* fe); + + int (*write)(struct dvb_frontend* fe, const u8 buf[], int len); + + /* if this is set, it overrides the default swzigzag */ + int (*tune)(struct dvb_frontend* fe, + bool re_tune, + unsigned int mode_flags, + unsigned int *delay, + enum fe_status *status); + + /* get frontend tuning algorithm from the module */ + enum dvbfe_algo (*get_frontend_algo)(struct dvb_frontend *fe); + + /* these two are only used for the swzigzag code */ + int (*set_frontend)(struct dvb_frontend *fe); + int (*get_tune_settings)(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* settings); + + int (*get_frontend)(struct dvb_frontend *fe, + struct dtv_frontend_properties *props); + + int (*read_status)(struct dvb_frontend *fe, enum fe_status *status); + int (*read_ber)(struct dvb_frontend* fe, u32* ber); + int (*read_signal_strength)(struct dvb_frontend* fe, u16* strength); + int (*read_snr)(struct dvb_frontend* fe, u16* snr); + int (*read_ucblocks)(struct dvb_frontend* fe, u32* ucblocks); + + int (*diseqc_reset_overload)(struct dvb_frontend* fe); + int (*diseqc_send_master_cmd)(struct dvb_frontend* fe, struct dvb_diseqc_master_cmd* cmd); + int (*diseqc_recv_slave_reply)(struct dvb_frontend* fe, struct dvb_diseqc_slave_reply* reply); + int (*diseqc_send_burst)(struct dvb_frontend *fe, + enum fe_sec_mini_cmd minicmd); + int (*set_tone)(struct dvb_frontend *fe, enum fe_sec_tone_mode tone); + int (*set_voltage)(struct dvb_frontend *fe, + enum fe_sec_voltage voltage); + int (*enable_high_lnb_voltage)(struct dvb_frontend* fe, long arg); + int (*dishnetwork_send_legacy_command)(struct dvb_frontend* fe, unsigned long cmd); + int (*i2c_gate_ctrl)(struct dvb_frontend* fe, int enable); + int (*ts_bus_ctrl)(struct dvb_frontend* fe, int acquire); + int (*set_lna)(struct dvb_frontend *); + + /* + * These callbacks are for devices that implement their own + * tuning algorithms, rather than a simple swzigzag + */ + enum dvbfe_search (*search)(struct dvb_frontend *fe); + + struct dvb_tuner_ops tuner_ops; + struct analog_demod_ops analog_ops; +}; + +#ifdef __DVB_CORE__ +#define MAX_EVENT 8 + +/* Used only internally at dvb_frontend.c */ +struct dvb_fe_events { + struct dvb_frontend_event events[MAX_EVENT]; + int eventw; + int eventr; + int overflow; + wait_queue_head_t wait_queue; + struct mutex mtx; +}; +#endif + +/** + * struct dtv_frontend_properties - contains a list of properties that are + * specific to a digital TV standard. + * + * @frequency: frequency in Hz for terrestrial/cable or in kHz for + * Satellite + * @modulation: Frontend modulation type + * @voltage: SEC voltage (only Satellite) + * @sectone: SEC tone mode (only Satellite) + * @inversion: Spectral inversion + * @fec_inner: Forward error correction inner Code Rate + * @transmission_mode: Transmission Mode + * @bandwidth_hz: Bandwidth, in Hz. A zero value means that userspace + * wants to autodetect. + * @guard_interval: Guard Interval + * @hierarchy: Hierarchy + * @symbol_rate: Symbol Rate + * @code_rate_HP: high priority stream code rate + * @code_rate_LP: low priority stream code rate + * @pilot: Enable/disable/autodetect pilot tones + * @rolloff: Rolloff factor (alpha) + * @delivery_system: FE delivery system (e. g. digital TV standard) + * @interleaving: interleaving + * @isdbt_partial_reception: ISDB-T partial reception (only ISDB standard) + * @isdbt_sb_mode: ISDB-T Sound Broadcast (SB) mode (only ISDB standard) + * @isdbt_sb_subchannel: ISDB-T SB subchannel (only ISDB standard) + * @isdbt_sb_segment_idx: ISDB-T SB segment index (only ISDB standard) + * @isdbt_sb_segment_count: ISDB-T SB segment count (only ISDB standard) + * @isdbt_layer_enabled: ISDB Layer enabled (only ISDB standard) + * @layer: ISDB per-layer data (only ISDB standard) + * @layer.segment_count: Segment Count; + * @layer.fec: per layer code rate; + * @layer.modulation: per layer modulation; + * @layer.interleaving: per layer interleaving. + * @stream_id: If different than zero, enable substream filtering, if + * hardware supports (DVB-S2 and DVB-T2). + * @scrambling_sequence_index: Carries the index of the DVB-S2 physical layer + * scrambling sequence. + * @atscmh_fic_ver: Version number of the FIC (Fast Information Channel) + * signaling data (only ATSC-M/H) + * @atscmh_parade_id: Parade identification number (only ATSC-M/H) + * @atscmh_nog: Number of MH groups per MH subframe for a designated + * parade (only ATSC-M/H) + * @atscmh_tnog: Total number of MH groups including all MH groups + * belonging to all MH parades in one MH subframe + * (only ATSC-M/H) + * @atscmh_sgn: Start group number (only ATSC-M/H) + * @atscmh_prc: Parade repetition cycle (only ATSC-M/H) + * @atscmh_rs_frame_mode: Reed Solomon (RS) frame mode (only ATSC-M/H) + * @atscmh_rs_frame_ensemble: RS frame ensemble (only ATSC-M/H) + * @atscmh_rs_code_mode_pri: RS code mode pri (only ATSC-M/H) + * @atscmh_rs_code_mode_sec: RS code mode sec (only ATSC-M/H) + * @atscmh_sccc_block_mode: Series Concatenated Convolutional Code (SCCC) + * Block Mode (only ATSC-M/H) + * @atscmh_sccc_code_mode_a: SCCC code mode A (only ATSC-M/H) + * @atscmh_sccc_code_mode_b: SCCC code mode B (only ATSC-M/H) + * @atscmh_sccc_code_mode_c: SCCC code mode C (only ATSC-M/H) + * @atscmh_sccc_code_mode_d: SCCC code mode D (only ATSC-M/H) + * @lna: Power ON/OFF/AUTO the Linear Now-noise Amplifier (LNA) + * @strength: DVBv5 API statistics: Signal Strength + * @cnr: DVBv5 API statistics: Signal to Noise ratio of the + * (main) carrier + * @pre_bit_error: DVBv5 API statistics: pre-Viterbi bit error count + * @pre_bit_count: DVBv5 API statistics: pre-Viterbi bit count + * @post_bit_error: DVBv5 API statistics: post-Viterbi bit error count + * @post_bit_count: DVBv5 API statistics: post-Viterbi bit count + * @block_error: DVBv5 API statistics: block error count + * @block_count: DVBv5 API statistics: block count + * + * NOTE: derivated statistics like Uncorrected Error blocks (UCE) are + * calculated on userspace. + * + * Only a subset of the properties are needed for a given delivery system. + * For more info, consult the media_api.html with the documentation of the + * Userspace API. + */ +struct dtv_frontend_properties { + u32 frequency; + enum fe_modulation modulation; + + enum fe_sec_voltage voltage; + enum fe_sec_tone_mode sectone; + enum fe_spectral_inversion inversion; + enum fe_code_rate fec_inner; + enum fe_transmit_mode transmission_mode; + u32 bandwidth_hz; /* 0 = AUTO */ + enum fe_guard_interval guard_interval; + enum fe_hierarchy hierarchy; + u32 symbol_rate; + enum fe_code_rate code_rate_HP; + enum fe_code_rate code_rate_LP; + + enum fe_pilot pilot; + enum fe_rolloff rolloff; + + enum fe_delivery_system delivery_system; + + enum fe_interleaving interleaving; + + /* ISDB-T specifics */ + u8 isdbt_partial_reception; + u8 isdbt_sb_mode; + u8 isdbt_sb_subchannel; + u32 isdbt_sb_segment_idx; + u32 isdbt_sb_segment_count; + u8 isdbt_layer_enabled; + struct { + u8 segment_count; + enum fe_code_rate fec; + enum fe_modulation modulation; + u8 interleaving; + } layer[3]; + + /* Multistream specifics */ + u32 stream_id; + + /* Physical Layer Scrambling specifics */ + u32 scrambling_sequence_index; + + /* ATSC-MH specifics */ + u8 atscmh_fic_ver; + u8 atscmh_parade_id; + u8 atscmh_nog; + u8 atscmh_tnog; + u8 atscmh_sgn; + u8 atscmh_prc; + + u8 atscmh_rs_frame_mode; + u8 atscmh_rs_frame_ensemble; + u8 atscmh_rs_code_mode_pri; + u8 atscmh_rs_code_mode_sec; + u8 atscmh_sccc_block_mode; + u8 atscmh_sccc_code_mode_a; + u8 atscmh_sccc_code_mode_b; + u8 atscmh_sccc_code_mode_c; + u8 atscmh_sccc_code_mode_d; + + u32 lna; + + /* statistics data */ + struct dtv_fe_stats strength; + struct dtv_fe_stats cnr; + struct dtv_fe_stats pre_bit_error; + struct dtv_fe_stats pre_bit_count; + struct dtv_fe_stats post_bit_error; + struct dtv_fe_stats post_bit_count; + struct dtv_fe_stats block_error; + struct dtv_fe_stats block_count; +}; + +#define DVB_FE_NO_EXIT 0 +#define DVB_FE_NORMAL_EXIT 1 +#define DVB_FE_DEVICE_REMOVED 2 +#define DVB_FE_DEVICE_RESUME 3 + +/** + * struct dvb_frontend - Frontend structure to be used on drivers. + * + * @refcount: refcount to keep track of &struct dvb_frontend + * references + * @ops: embedded &struct dvb_frontend_ops + * @dvb: pointer to &struct dvb_adapter + * @demodulator_priv: demod private data + * @tuner_priv: tuner private data + * @frontend_priv: frontend private data + * @sec_priv: SEC private data + * @analog_demod_priv: Analog demod private data + * @dtv_property_cache: embedded &struct dtv_frontend_properties + * @callback: callback function used on some drivers to call + * either the tuner or the demodulator. + * @id: Frontend ID + * @exit: Used to inform the DVB core that the frontend + * thread should exit (usually, means that the hardware + * got disconnected. + */ + +struct dvb_frontend { + struct kref refcount; + struct dvb_frontend_ops ops; + struct dvb_adapter *dvb; + void *demodulator_priv; + void *tuner_priv; + void *frontend_priv; + void *sec_priv; + void *analog_demod_priv; + struct dtv_frontend_properties dtv_property_cache; +#define DVB_FRONTEND_COMPONENT_TUNER 0 +#define DVB_FRONTEND_COMPONENT_DEMOD 1 + int (*callback)(void *adapter_priv, int component, int cmd, int arg); + int id; + unsigned int exit; +}; + +/** + * dvb_register_frontend() - Registers a DVB frontend at the adapter + * + * @dvb: pointer to &struct dvb_adapter + * @fe: pointer to &struct dvb_frontend + * + * Allocate and initialize the private data needed by the frontend core to + * manage the frontend and calls dvb_register_device() to register a new + * frontend. It also cleans the property cache that stores the frontend + * parameters and selects the first available delivery system. + */ +int dvb_register_frontend(struct dvb_adapter *dvb, + struct dvb_frontend *fe); + +/** + * dvb_unregister_frontend() - Unregisters a DVB frontend + * + * @fe: pointer to &struct dvb_frontend + * + * Stops the frontend kthread, calls dvb_unregister_device() and frees the + * private frontend data allocated by dvb_register_frontend(). + * + * NOTE: This function doesn't frees the memory allocated by the demod, + * by the SEC driver and by the tuner. In order to free it, an explicit call to + * dvb_frontend_detach() is needed, after calling this function. + */ +int dvb_unregister_frontend(struct dvb_frontend *fe); + +/** + * dvb_frontend_detach() - Detaches and frees frontend specific data + * + * @fe: pointer to &struct dvb_frontend + * + * This function should be called after dvb_unregister_frontend(). It + * calls the SEC, tuner and demod release functions: + * &dvb_frontend_ops.release_sec, &dvb_frontend_ops.tuner_ops.release, + * &dvb_frontend_ops.analog_ops.release and &dvb_frontend_ops.release. + * + * If the driver is compiled with %CONFIG_MEDIA_ATTACH, it also decreases + * the module reference count, needed to allow userspace to remove the + * previously used DVB frontend modules. + */ +void dvb_frontend_detach(struct dvb_frontend *fe); + +/** + * dvb_frontend_suspend() - Suspends a Digital TV frontend + * + * @fe: pointer to &struct dvb_frontend + * + * This function prepares a Digital TV frontend to suspend. + * + * In order to prepare the tuner to suspend, if + * &dvb_frontend_ops.tuner_ops.suspend\(\) is available, it calls it. Otherwise, + * it will call &dvb_frontend_ops.tuner_ops.sleep\(\), if available. + * + * It will also call &dvb_frontend_ops.sleep\(\) to put the demod to suspend. + * + * The drivers should also call dvb_frontend_suspend\(\) as part of their + * handler for the &device_driver.suspend\(\). + */ +int dvb_frontend_suspend(struct dvb_frontend *fe); + +/** + * dvb_frontend_resume() - Resumes a Digital TV frontend + * + * @fe: pointer to &struct dvb_frontend + * + * This function resumes the usual operation of the tuner after resume. + * + * In order to resume the frontend, it calls the demod &dvb_frontend_ops.init\(\). + * + * If &dvb_frontend_ops.tuner_ops.resume\(\) is available, It, it calls it. + * Otherwise,t will call &dvb_frontend_ops.tuner_ops.init\(\), if available. + * + * Once tuner and demods are resumed, it will enforce that the SEC voltage and + * tone are restored to their previous values and wake up the frontend's + * kthread in order to retune the frontend. + * + * The drivers should also call dvb_frontend_resume() as part of their + * handler for the &device_driver.resume\(\). + */ +int dvb_frontend_resume(struct dvb_frontend *fe); + +/** + * dvb_frontend_reinitialise() - forces a reinitialisation at the frontend + * + * @fe: pointer to &struct dvb_frontend + * + * Calls &dvb_frontend_ops.init\(\) and &dvb_frontend_ops.tuner_ops.init\(\), + * and resets SEC tone and voltage (for Satellite systems). + * + * NOTE: Currently, this function is used only by one driver (budget-av). + * It seems to be due to address some special issue with that specific + * frontend. + */ +void dvb_frontend_reinitialise(struct dvb_frontend *fe); + +/** + * dvb_frontend_sleep_until() - Sleep for the amount of time given by + * add_usec parameter + * + * @waketime: pointer to &struct ktime_t + * @add_usec: time to sleep, in microseconds + * + * This function is used to measure the time required for the + * FE_DISHNETWORK_SEND_LEGACY_CMD() ioctl to work. It needs to be as precise + * as possible, as it affects the detection of the dish tone command at the + * satellite subsystem. + * + * Its used internally by the DVB frontend core, in order to emulate + * FE_DISHNETWORK_SEND_LEGACY_CMD() using the &dvb_frontend_ops.set_voltage\(\) + * callback. + * + * NOTE: it should not be used at the drivers, as the emulation for the + * legacy callback is provided by the Kernel. The only situation where this + * should be at the drivers is when there are some bugs at the hardware that + * would prevent the core emulation to work. On such cases, the driver would + * be writing a &dvb_frontend_ops.dishnetwork_send_legacy_command\(\) and + * calling this function directly. + */ +void dvb_frontend_sleep_until(ktime_t *waketime, u32 add_usec); + +#endif diff --git a/include/media/dvb_math.h b/include/media/dvb_math.h new file mode 100644 index 000000000000..8690ec42954d --- /dev/null +++ b/include/media/dvb_math.h @@ -0,0 +1,66 @@ +/* + * dvb-math provides some complex fixed-point math + * operations shared between the dvb related stuff + * + * Copyright (C) 2006 Christoph Pfister (christophpfister@gmail.com) + * + * This library is free software; you can redistribute it and/or modify + * it under the terms of the GNU Lesser General Public License as + * published by the Free Software Foundation; either version 2.1 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU Lesser General Public License for more details. + */ + +#ifndef __DVB_MATH_H +#define __DVB_MATH_H + +#include <linux/types.h> + +/** + * intlog2 - computes log2 of a value; the result is shifted left by 24 bits + * + * @value: The value (must be != 0) + * + * to use rational values you can use the following method: + * + * intlog2(value) = intlog2(value * 2^x) - x * 2^24 + * + * Some usecase examples: + * + * intlog2(8) will give 3 << 24 = 3 * 2^24 + * + * intlog2(9) will give 3 << 24 + ... = 3.16... * 2^24 + * + * intlog2(1.5) = intlog2(3) - 2^24 = 0.584... * 2^24 + * + * + * return: log2(value) * 2^24 + */ +extern unsigned int intlog2(u32 value); + +/** + * intlog10 - computes log10 of a value; the result is shifted left by 24 bits + * + * @value: The value (must be != 0) + * + * to use rational values you can use the following method: + * + * intlog10(value) = intlog10(value * 10^x) - x * 2^24 + * + * An usecase example: + * + * intlog10(1000) will give 3 << 24 = 3 * 2^24 + * + * due to the implementation intlog10(1000) might be not exactly 3 * 2^24 + * + * look at intlog2 for similar examples + * + * return: log10(value) * 2^24 + */ +extern unsigned int intlog10(u32 value); + +#endif diff --git a/include/media/dvb_net.h b/include/media/dvb_net.h new file mode 100644 index 000000000000..5e31d37f25fa --- /dev/null +++ b/include/media/dvb_net.h @@ -0,0 +1,93 @@ +/* + * dvb_net.h + * + * Copyright (C) 2001 Ralph Metzler for convergence integrated media GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public License + * as published by the Free Software Foundation; either version 2.1 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef _DVB_NET_H_ +#define _DVB_NET_H_ + +#include <linux/module.h> +#include <linux/netdevice.h> +#include <linux/inetdevice.h> +#include <linux/etherdevice.h> +#include <linux/skbuff.h> + +#include <media/dvbdev.h> + +#define DVB_NET_DEVICES_MAX 10 + +#ifdef CONFIG_DVB_NET + +/** + * struct dvb_net - describes a DVB network interface + * + * @dvbdev: pointer to &struct dvb_device. + * @device: array of pointers to &struct net_device. + * @state: array of integers to each net device. A value + * different than zero means that the interface is + * in usage. + * @exit: flag to indicate when the device is being removed. + * @demux: pointer to &struct dmx_demux. + * @ioctl_mutex: protect access to this struct. + * + * Currently, the core supports up to %DVB_NET_DEVICES_MAX (10) network + * devices. + */ + +struct dvb_net { + struct dvb_device *dvbdev; + struct net_device *device[DVB_NET_DEVICES_MAX]; + int state[DVB_NET_DEVICES_MAX]; + unsigned int exit:1; + struct dmx_demux *demux; + struct mutex ioctl_mutex; +}; + +/** + * dvb_net_init - nitializes a digital TV network device and registers it. + * + * @adap: pointer to &struct dvb_adapter. + * @dvbnet: pointer to &struct dvb_net. + * @dmxdemux: pointer to &struct dmx_demux. + */ +int dvb_net_init(struct dvb_adapter *adap, struct dvb_net *dvbnet, + struct dmx_demux *dmxdemux); + +/** + * dvb_net_release - releases a digital TV network device and unregisters it. + * + * @dvbnet: pointer to &struct dvb_net. + */ +void dvb_net_release(struct dvb_net *dvbnet); + +#else + +struct dvb_net { + struct dvb_device *dvbdev; +}; + +static inline void dvb_net_release(struct dvb_net *dvbnet) +{ +} + +static inline int dvb_net_init(struct dvb_adapter *adap, + struct dvb_net *dvbnet, struct dmx_demux *dmx) +{ + return 0; +} + +#endif /* ifdef CONFIG_DVB_NET */ + +#endif diff --git a/include/media/dvb_ringbuffer.h b/include/media/dvb_ringbuffer.h new file mode 100644 index 000000000000..8ed6bcc3a56e --- /dev/null +++ b/include/media/dvb_ringbuffer.h @@ -0,0 +1,280 @@ +/* + * + * dvb_ringbuffer.h: ring buffer implementation for the dvb driver + * + * Copyright (C) 2003 Oliver Endriss + * Copyright (C) 2004 Andrew de Quincey + * + * based on code originally found in av7110.c & dvb_ci.c: + * Copyright (C) 1999-2003 Ralph Metzler & Marcus Metzler + * for convergence integrated media GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public License + * as published by the Free Software Foundation; either version 2.1 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU Lesser General Public License for more details. + */ + +#ifndef _DVB_RINGBUFFER_H_ +#define _DVB_RINGBUFFER_H_ + +#include <linux/spinlock.h> +#include <linux/wait.h> + +/** + * struct dvb_ringbuffer - Describes a ring buffer used at DVB framework + * + * @data: Area were the ringbuffer data is written + * @size: size of the ringbuffer + * @pread: next position to read + * @pwrite: next position to write + * @error: used by ringbuffer clients to indicate that an error happened. + * @queue: Wait queue used by ringbuffer clients to indicate when buffer + * was filled + * @lock: Spinlock used to protect the ringbuffer + */ +struct dvb_ringbuffer { + u8 *data; + ssize_t size; + ssize_t pread; + ssize_t pwrite; + int error; + + wait_queue_head_t queue; + spinlock_t lock; +}; + +#define DVB_RINGBUFFER_PKTHDRSIZE 3 + +/** + * dvb_ringbuffer_init - initialize ring buffer, lock and queue + * + * @rbuf: pointer to struct dvb_ringbuffer + * @data: pointer to the buffer where the data will be stored + * @len: bytes from ring buffer into @buf + */ +extern void dvb_ringbuffer_init(struct dvb_ringbuffer *rbuf, void *data, + size_t len); + +/** + * dvb_ringbuffer_empty - test whether buffer is empty + * + * @rbuf: pointer to struct dvb_ringbuffer + */ +extern int dvb_ringbuffer_empty(struct dvb_ringbuffer *rbuf); + +/** + * dvb_ringbuffer_free - returns the number of free bytes in the buffer + * + * @rbuf: pointer to struct dvb_ringbuffer + * + * Return: number of free bytes in the buffer + */ +extern ssize_t dvb_ringbuffer_free(struct dvb_ringbuffer *rbuf); + +/** + * dvb_ringbuffer_avail - returns the number of bytes waiting in the buffer + * + * @rbuf: pointer to struct dvb_ringbuffer + * + * Return: number of bytes waiting in the buffer + */ +extern ssize_t dvb_ringbuffer_avail(struct dvb_ringbuffer *rbuf); + +/** + * dvb_ringbuffer_reset - resets the ringbuffer to initial state + * + * @rbuf: pointer to struct dvb_ringbuffer + * + * Resets the read and write pointers to zero and flush the buffer. + * + * This counts as a read and write operation + */ +extern void dvb_ringbuffer_reset(struct dvb_ringbuffer *rbuf); + +/* + * read routines & macros + */ + +/** + * dvb_ringbuffer_flush - flush buffer + * + * @rbuf: pointer to struct dvb_ringbuffer + */ +extern void dvb_ringbuffer_flush(struct dvb_ringbuffer *rbuf); + +/** + * dvb_ringbuffer_flush_spinlock_wakeup- flush buffer protected by spinlock + * and wake-up waiting task(s) + * + * @rbuf: pointer to struct dvb_ringbuffer + */ +extern void dvb_ringbuffer_flush_spinlock_wakeup(struct dvb_ringbuffer *rbuf); + +/** + * DVB_RINGBUFFER_PEEK - peek at byte @offs in the buffer + * + * @rbuf: pointer to struct dvb_ringbuffer + * @offs: offset inside the ringbuffer + */ +#define DVB_RINGBUFFER_PEEK(rbuf, offs) \ + ((rbuf)->data[((rbuf)->pread + (offs)) % (rbuf)->size]) + +/** + * DVB_RINGBUFFER_SKIP - advance read ptr by @num bytes + * + * @rbuf: pointer to struct dvb_ringbuffer + * @num: number of bytes to advance + */ +#define DVB_RINGBUFFER_SKIP(rbuf, num) {\ + (rbuf)->pread = ((rbuf)->pread + (num)) % (rbuf)->size;\ +} + +/** + * dvb_ringbuffer_read_user - Reads a buffer into a user pointer + * + * @rbuf: pointer to struct dvb_ringbuffer + * @buf: pointer to the buffer where the data will be stored + * @len: bytes from ring buffer into @buf + * + * This variant assumes that the buffer is a memory at the userspace. So, + * it will internally call copy_to_user(). + * + * Return: number of bytes transferred or -EFAULT + */ +extern ssize_t dvb_ringbuffer_read_user(struct dvb_ringbuffer *rbuf, + u8 __user *buf, size_t len); + +/** + * dvb_ringbuffer_read - Reads a buffer into a pointer + * + * @rbuf: pointer to struct dvb_ringbuffer + * @buf: pointer to the buffer where the data will be stored + * @len: bytes from ring buffer into @buf + * + * This variant assumes that the buffer is a memory at the Kernel space + * + * Return: number of bytes transferred or -EFAULT + */ +extern void dvb_ringbuffer_read(struct dvb_ringbuffer *rbuf, + u8 *buf, size_t len); + +/* + * write routines & macros + */ + +/** + * DVB_RINGBUFFER_WRITE_BYTE - write single byte to ring buffer + * + * @rbuf: pointer to struct dvb_ringbuffer + * @byte: byte to write + */ +#define DVB_RINGBUFFER_WRITE_BYTE(rbuf, byte) \ + { (rbuf)->data[(rbuf)->pwrite] = (byte); \ + (rbuf)->pwrite = ((rbuf)->pwrite + 1) % (rbuf)->size; } + +/** + * dvb_ringbuffer_write - Writes a buffer into the ringbuffer + * + * @rbuf: pointer to struct dvb_ringbuffer + * @buf: pointer to the buffer where the data will be read + * @len: bytes from ring buffer into @buf + * + * This variant assumes that the buffer is a memory at the Kernel space + * + * return: number of bytes transferred or -EFAULT + */ +extern ssize_t dvb_ringbuffer_write(struct dvb_ringbuffer *rbuf, const u8 *buf, + size_t len); + +/** + * dvb_ringbuffer_write_user - Writes a buffer received via a user pointer + * + * @rbuf: pointer to struct dvb_ringbuffer + * @buf: pointer to the buffer where the data will be read + * @len: bytes from ring buffer into @buf + * + * This variant assumes that the buffer is a memory at the userspace. So, + * it will internally call copy_from_user(). + * + * Return: number of bytes transferred or -EFAULT + */ +extern ssize_t dvb_ringbuffer_write_user(struct dvb_ringbuffer *rbuf, + const u8 __user *buf, size_t len); + +/** + * dvb_ringbuffer_pkt_write - Write a packet into the ringbuffer. + * + * @rbuf: Ringbuffer to write to. + * @buf: Buffer to write. + * @len: Length of buffer (currently limited to 65535 bytes max). + * + * Return: Number of bytes written, or -EFAULT, -ENOMEM, -EVINAL. + */ +extern ssize_t dvb_ringbuffer_pkt_write(struct dvb_ringbuffer *rbuf, u8 *buf, + size_t len); + +/** + * dvb_ringbuffer_pkt_read_user - Read from a packet in the ringbuffer. + * + * @rbuf: Ringbuffer concerned. + * @idx: Packet index as returned by dvb_ringbuffer_pkt_next(). + * @offset: Offset into packet to read from. + * @buf: Destination buffer for data. + * @len: Size of destination buffer. + * + * Return: Number of bytes read, or -EFAULT. + * + * .. note:: + * + * unlike dvb_ringbuffer_read(), this does **NOT** update the read pointer + * in the ringbuffer. You must use dvb_ringbuffer_pkt_dispose() to mark a + * packet as no longer required. + */ +extern ssize_t dvb_ringbuffer_pkt_read_user(struct dvb_ringbuffer *rbuf, + size_t idx, + int offset, u8 __user *buf, + size_t len); + +/** + * dvb_ringbuffer_pkt_read - Read from a packet in the ringbuffer. + * Note: unlike dvb_ringbuffer_read_user(), this DOES update the read pointer + * in the ringbuffer. + * + * @rbuf: Ringbuffer concerned. + * @idx: Packet index as returned by dvb_ringbuffer_pkt_next(). + * @offset: Offset into packet to read from. + * @buf: Destination buffer for data. + * @len: Size of destination buffer. + * + * Return: Number of bytes read, or -EFAULT. + */ +extern ssize_t dvb_ringbuffer_pkt_read(struct dvb_ringbuffer *rbuf, size_t idx, + int offset, u8 *buf, size_t len); + +/** + * dvb_ringbuffer_pkt_dispose - Dispose of a packet in the ring buffer. + * + * @rbuf: Ring buffer concerned. + * @idx: Packet index as returned by dvb_ringbuffer_pkt_next(). + */ +extern void dvb_ringbuffer_pkt_dispose(struct dvb_ringbuffer *rbuf, size_t idx); + +/** + * dvb_ringbuffer_pkt_next - Get the index of the next packet in a ringbuffer. + * + * @rbuf: Ringbuffer concerned. + * @idx: Previous packet index, or -1 to return the first packet index. + * @pktlen: On success, will be updated to contain the length of the packet + * in bytes. + * returns Packet index (if >=0), or -1 if no packets available. + */ +extern ssize_t dvb_ringbuffer_pkt_next(struct dvb_ringbuffer *rbuf, + size_t idx, size_t *pktlen); + +#endif /* _DVB_RINGBUFFER_H_ */ diff --git a/include/media/dvb_vb2.h b/include/media/dvb_vb2.h new file mode 100644 index 000000000000..7a529844c5e1 --- /dev/null +++ b/include/media/dvb_vb2.h @@ -0,0 +1,96 @@ +/* + * SPDX-License-Identifier: GPL-2.0 + * + * dvb-vb2.h - DVB driver helper framework for streaming I/O + * + * Copyright (C) 2015 Samsung Electronics + * + * Author: jh1009.sung@samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation. + */ + +#ifndef _DVB_VB2_H +#define _DVB_VB2_H + +#include <linux/mutex.h> +#include <linux/poll.h> +#include <linux/dvb/dmx.h> +#include <media/videobuf2-core.h> +#include <media/videobuf2-dma-contig.h> +#include <media/videobuf2-vmalloc.h> + +enum dvb_buf_type { + DVB_BUF_TYPE_CAPTURE = 1, + DVB_BUF_TYPE_OUTPUT = 2, +}; + +#define DVB_VB2_STATE_NONE (0x0) +#define DVB_VB2_STATE_INIT (0x1) +#define DVB_VB2_STATE_REQBUFS (0x2) +#define DVB_VB2_STATE_STREAMON (0x4) + +#define DVB_VB2_NAME_MAX (20) + +struct dvb_buffer { + struct vb2_buffer vb; + struct list_head list; +}; + +struct dvb_vb2_ctx { + struct vb2_queue vb_q; + struct mutex mutex; + spinlock_t slock; + struct list_head dvb_q; + struct dvb_buffer *buf; + int offset; + int remain; + int state; + int buf_siz; + int buf_cnt; + int nonblocking; + char name[DVB_VB2_NAME_MAX + 1]; +}; + +int dvb_vb2_stream_on(struct dvb_vb2_ctx *ctx); +int dvb_vb2_stream_off(struct dvb_vb2_ctx *ctx); +#ifndef DVB_MMAP +static inline int dvb_vb2_init(struct dvb_vb2_ctx *ctx, + const char *name, int non_blocking) +{ + return 0; +}; +static inline int dvb_vb2_release(struct dvb_vb2_ctx *ctx) +{ + return 0; +}; +#define dvb_vb2_is_streaming(ctx) (0) +#define dvb_vb2_fill_buffer(ctx, file, wait) (0) + +static inline unsigned int dvb_vb2_poll(struct dvb_vb2_ctx *ctx, + struct file *file, + poll_table *wait) +{ + return 0; +} +#else +int dvb_vb2_init(struct dvb_vb2_ctx *ctx, const char *name, int non_blocking); +int dvb_vb2_release(struct dvb_vb2_ctx *ctx); +int dvb_vb2_is_streaming(struct dvb_vb2_ctx *ctx); +int dvb_vb2_fill_buffer(struct dvb_vb2_ctx *ctx, + const unsigned char *src, int len); +unsigned int dvb_vb2_poll(struct dvb_vb2_ctx *ctx, struct file *file, + poll_table *wait); +#endif + + +int dvb_vb2_reqbufs(struct dvb_vb2_ctx *ctx, struct dmx_requestbuffers *req); +int dvb_vb2_querybuf(struct dvb_vb2_ctx *ctx, struct dmx_buffer *b); +int dvb_vb2_expbuf(struct dvb_vb2_ctx *ctx, struct dmx_exportbuffer *exp); +int dvb_vb2_qbuf(struct dvb_vb2_ctx *ctx, struct dmx_buffer *b); +int dvb_vb2_dqbuf(struct dvb_vb2_ctx *ctx, struct dmx_buffer *b); +int dvb_vb2_mmap(struct dvb_vb2_ctx *ctx, struct vm_area_struct *vma); + +#endif /* _DVB_VB2_H */ diff --git a/include/media/dvbdev.h b/include/media/dvbdev.h new file mode 100644 index 000000000000..bbc1c20c0529 --- /dev/null +++ b/include/media/dvbdev.h @@ -0,0 +1,407 @@ +/* + * dvbdev.h + * + * Copyright (C) 2000 Ralph Metzler & Marcus Metzler + * for convergence integrated media GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Lesser Public License + * as published by the Free Software Foundation; either version 2.1 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef _DVBDEV_H_ +#define _DVBDEV_H_ + +#include <linux/types.h> +#include <linux/poll.h> +#include <linux/fs.h> +#include <linux/list.h> +#include <media/media-device.h> + +#define DVB_MAJOR 212 + +#if defined(CONFIG_DVB_MAX_ADAPTERS) && CONFIG_DVB_MAX_ADAPTERS > 0 + #define DVB_MAX_ADAPTERS CONFIG_DVB_MAX_ADAPTERS +#else + #define DVB_MAX_ADAPTERS 16 +#endif + +#define DVB_UNSET (-1) + +/* List of DVB device types */ + +/** + * enum dvb_device_type - type of the Digital TV device + * + * @DVB_DEVICE_SEC: Digital TV standalone Common Interface (CI) + * @DVB_DEVICE_FRONTEND: Digital TV frontend. + * @DVB_DEVICE_DEMUX: Digital TV demux. + * @DVB_DEVICE_DVR: Digital TV digital video record (DVR). + * @DVB_DEVICE_CA: Digital TV Conditional Access (CA). + * @DVB_DEVICE_NET: Digital TV network. + * + * @DVB_DEVICE_VIDEO: Digital TV video decoder. + * Deprecated. Used only on av7110-av. + * @DVB_DEVICE_AUDIO: Digital TV audio decoder. + * Deprecated. Used only on av7110-av. + * @DVB_DEVICE_OSD: Digital TV On Screen Display (OSD). + * Deprecated. Used only on av7110. + */ +enum dvb_device_type { + DVB_DEVICE_SEC, + DVB_DEVICE_FRONTEND, + DVB_DEVICE_DEMUX, + DVB_DEVICE_DVR, + DVB_DEVICE_CA, + DVB_DEVICE_NET, + + DVB_DEVICE_VIDEO, + DVB_DEVICE_AUDIO, + DVB_DEVICE_OSD, +}; + +#define DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr) \ + static short adapter_nr[] = \ + {[0 ... (DVB_MAX_ADAPTERS - 1)] = DVB_UNSET }; \ + module_param_array(adapter_nr, short, NULL, 0444); \ + MODULE_PARM_DESC(adapter_nr, "DVB adapter numbers") + +struct dvb_frontend; + +/** + * struct dvb_adapter - represents a Digital TV adapter using Linux DVB API + * + * @num: Number of the adapter + * @list_head: List with the DVB adapters + * @device_list: List with the DVB devices + * @name: Name of the adapter + * @proposed_mac: proposed MAC address for the adapter + * @priv: private data + * @device: pointer to struct device + * @module: pointer to struct module + * @mfe_shared: mfe shared: indicates mutually exclusive frontends + * Thie usage of this flag is currently deprecated + * @mfe_dvbdev: Frontend device in use, in the case of MFE + * @mfe_lock: Lock to prevent using the other frontends when MFE is + * used. + * @mdev: pointer to struct media_device, used when the media + * controller is used. + * @conn: RF connector. Used only if the device has no separate + * tuner. + * @conn_pads: pointer to struct media_pad associated with @conn; + */ +struct dvb_adapter { + int num; + struct list_head list_head; + struct list_head device_list; + const char *name; + u8 proposed_mac [6]; + void* priv; + + struct device *device; + + struct module *module; + + int mfe_shared; /* indicates mutually exclusive frontends */ + struct dvb_device *mfe_dvbdev; /* frontend device in use */ + struct mutex mfe_lock; /* access lock for thread creation */ + +#if defined(CONFIG_MEDIA_CONTROLLER_DVB) + struct media_device *mdev; + struct media_entity *conn; + struct media_pad *conn_pads; +#endif +}; + +/** + * struct dvb_device - represents a DVB device node + * + * @list_head: List head with all DVB devices + * @fops: pointer to struct file_operations + * @adapter: pointer to the adapter that holds this device node + * @type: type of the device, as defined by &enum dvb_device_type. + * @minor: devnode minor number. Major number is always DVB_MAJOR. + * @id: device ID number, inside the adapter + * @readers: Initialized by the caller. Each call to open() in Read Only mode + * decreases this counter by one. + * @writers: Initialized by the caller. Each call to open() in Read/Write + * mode decreases this counter by one. + * @users: Initialized by the caller. Each call to open() in any mode + * decreases this counter by one. + * @wait_queue: wait queue, used to wait for certain events inside one of + * the DVB API callers + * @kernel_ioctl: callback function used to handle ioctl calls from userspace. + * @name: Name to be used for the device at the Media Controller + * @entity: pointer to struct media_entity associated with the device node + * @pads: pointer to struct media_pad associated with @entity; + * @priv: private data + * @intf_devnode: Pointer to media_intf_devnode. Used by the dvbdev core to + * store the MC device node interface + * @tsout_num_entities: Number of Transport Stream output entities + * @tsout_entity: array with MC entities associated to each TS output node + * @tsout_pads: array with the source pads for each @tsout_entity + * + * This structure is used by the DVB core (frontend, CA, net, demux) in + * order to create the device nodes. Usually, driver should not initialize + * this struct diretly. + */ +struct dvb_device { + struct list_head list_head; + const struct file_operations *fops; + struct dvb_adapter *adapter; + enum dvb_device_type type; + int minor; + u32 id; + + /* in theory, 'users' can vanish now, + but I don't want to change too much now... */ + int readers; + int writers; + int users; + + wait_queue_head_t wait_queue; + /* don't really need those !? -- FIXME: use video_usercopy */ + int (*kernel_ioctl)(struct file *file, unsigned int cmd, void *arg); + + /* Needed for media controller register/unregister */ +#if defined(CONFIG_MEDIA_CONTROLLER_DVB) + const char *name; + + /* Allocated and filled inside dvbdev.c */ + struct media_intf_devnode *intf_devnode; + + unsigned tsout_num_entities; + struct media_entity *entity, *tsout_entity; + struct media_pad *pads, *tsout_pads; +#endif + + void *priv; +}; + +/** + * dvb_register_adapter - Registers a new DVB adapter + * + * @adap: pointer to struct dvb_adapter + * @name: Adapter's name + * @module: initialized with THIS_MODULE at the caller + * @device: pointer to struct device that corresponds to the device driver + * @adapter_nums: Array with a list of the numbers for @dvb_register_adapter; + * to select among them. Typically, initialized with: + * DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nums) + */ +int dvb_register_adapter(struct dvb_adapter *adap, const char *name, + struct module *module, struct device *device, + short *adapter_nums); + +/** + * dvb_unregister_adapter - Unregisters a DVB adapter + * + * @adap: pointer to struct dvb_adapter + */ +int dvb_unregister_adapter(struct dvb_adapter *adap); + +/** + * dvb_register_device - Registers a new DVB device + * + * @adap: pointer to struct dvb_adapter + * @pdvbdev: pointer to the place where the new struct dvb_device will be + * stored + * @template: Template used to create &pdvbdev; + * @priv: private data + * @type: type of the device, as defined by &enum dvb_device_type. + * @demux_sink_pads: Number of demux outputs, to be used to create the TS + * outputs via the Media Controller. + */ +int dvb_register_device(struct dvb_adapter *adap, + struct dvb_device **pdvbdev, + const struct dvb_device *template, + void *priv, + enum dvb_device_type type, + int demux_sink_pads); + +/** + * dvb_remove_device - Remove a registered DVB device + * + * This does not free memory. To do that, call dvb_free_device(). + * + * @dvbdev: pointer to struct dvb_device + */ +void dvb_remove_device(struct dvb_device *dvbdev); + +/** + * dvb_free_device - Free memory occupied by a DVB device. + * + * Call dvb_unregister_device() before calling this function. + * + * @dvbdev: pointer to struct dvb_device + */ +void dvb_free_device(struct dvb_device *dvbdev); + +/** + * dvb_unregister_device - Unregisters a DVB device + * + * This is a combination of dvb_remove_device() and dvb_free_device(). + * Using this function is usually a mistake, and is often an indicator + * for a use-after-free bug (when a userspace process keeps a file + * handle to a detached device). + * + * @dvbdev: pointer to struct dvb_device + */ +void dvb_unregister_device(struct dvb_device *dvbdev); + +#ifdef CONFIG_MEDIA_CONTROLLER_DVB +/** + * dvb_create_media_graph - Creates media graph for the Digital TV part of the + * device. + * + * @adap: pointer to &struct dvb_adapter + * @create_rf_connector: if true, it creates the RF connector too + * + * This function checks all DVB-related functions at the media controller + * entities and creates the needed links for the media graph. It is + * capable of working with multiple tuners or multiple frontends, but it + * won't create links if the device has multiple tuners and multiple frontends + * or if the device has multiple muxes. In such case, the caller driver should + * manually create the remaining links. + */ +__must_check int dvb_create_media_graph(struct dvb_adapter *adap, + bool create_rf_connector); + +/** + * dvb_register_media_controller - registers a media controller at DVB adapter + * + * @adap: pointer to &struct dvb_adapter + * @mdev: pointer to &struct media_device + */ +static inline void dvb_register_media_controller(struct dvb_adapter *adap, + struct media_device *mdev) +{ + adap->mdev = mdev; +} + +/** + * dvb_get_media_controller - gets the associated media controller + * + * @adap: pointer to &struct dvb_adapter + */ +static inline struct media_device +*dvb_get_media_controller(struct dvb_adapter *adap) +{ + return adap->mdev; +} +#else +static inline +int dvb_create_media_graph(struct dvb_adapter *adap, + bool create_rf_connector) +{ + return 0; +}; +#define dvb_register_media_controller(a, b) {} +#define dvb_get_media_controller(a) NULL +#endif + +/** + * dvb_generic_open - Digital TV open function, used by DVB devices + * + * @inode: pointer to &struct inode. + * @file: pointer to &struct file. + * + * Checks if a DVB devnode is still valid, and if the permissions are + * OK and increment negative use count. + */ +int dvb_generic_open(struct inode *inode, struct file *file); + +/** + * dvb_generic_close - Digital TV close function, used by DVB devices + * + * @inode: pointer to &struct inode. + * @file: pointer to &struct file. + * + * Checks if a DVB devnode is still valid, and if the permissions are + * OK and decrement negative use count. + */ +int dvb_generic_release(struct inode *inode, struct file *file); + +/** + * dvb_generic_ioctl - Digital TV close function, used by DVB devices + * + * @file: pointer to &struct file. + * @cmd: Ioctl name. + * @arg: Ioctl argument. + * + * Checks if a DVB devnode and struct dvbdev.kernel_ioctl is still valid. + * If so, calls dvb_usercopy(). + */ +long dvb_generic_ioctl(struct file *file, + unsigned int cmd, unsigned long arg); + +/** + * dvb_usercopy - copies data from/to userspace memory when an ioctl is + * issued. + * + * @file: Pointer to struct &file. + * @cmd: Ioctl name. + * @arg: Ioctl argument. + * @func: function that will actually handle the ioctl + * + * Ancillary function that uses ioctl direction and size to copy from + * userspace. Then, it calls @func, and, if needed, data is copied back + * to userspace. + */ +int dvb_usercopy(struct file *file, unsigned int cmd, unsigned long arg, + int (*func)(struct file *file, unsigned int cmd, void *arg)); + +/** generic DVB attach function. */ +#ifdef CONFIG_MEDIA_ATTACH + +/** + * dvb_attach - attaches a DVB frontend into the DVB core. + * + * @FUNCTION: function on a frontend module to be called. + * @ARGS...: @FUNCTION arguments. + * + * This ancillary function loads a frontend module in runtime and runs + * the @FUNCTION function there, with @ARGS. + * As it increments symbol usage cont, at unregister, dvb_detach() + * should be called. + */ +#define dvb_attach(FUNCTION, ARGS...) ({ \ + void *__r = NULL; \ + typeof(&FUNCTION) __a = symbol_request(FUNCTION); \ + if (__a) { \ + __r = (void *) __a(ARGS); \ + if (__r == NULL) \ + symbol_put(FUNCTION); \ + } else { \ + printk(KERN_ERR "DVB: Unable to find symbol "#FUNCTION"()\n"); \ + } \ + __r; \ +}) + +/** + * dvb_detach - detaches a DVB frontend loaded via dvb_attach() + * + * @FUNC: attach function + * + * Decrements usage count for a function previously called via dvb_attach(). + */ + +#define dvb_detach(FUNC) symbol_put_addr(FUNC) + +#else +#define dvb_attach(FUNCTION, ARGS...) ({ \ + FUNCTION(ARGS); \ +}) + +#define dvb_detach(FUNC) {} + +#endif + +#endif /* #ifndef _DVBDEV_H_ */ diff --git a/include/media/videobuf-dvb.h b/include/media/videobuf-dvb.h index a14ac7711c92..c9c81990a56c 100644 --- a/include/media/videobuf-dvb.h +++ b/include/media/videobuf-dvb.h @@ -1,9 +1,9 @@ /* SPDX-License-Identifier: GPL-2.0 */ -#include <dvbdev.h> -#include <dmxdev.h> -#include <dvb_demux.h> -#include <dvb_net.h> -#include <dvb_frontend.h> +#include <media/dvbdev.h> +#include <media/dmxdev.h> +#include <media/dvb_demux.h> +#include <media/dvb_net.h> +#include <media/dvb_frontend.h> #ifndef _VIDEOBUF_DVB_H_ #define _VIDEOBUF_DVB_H_ diff --git a/include/media/videobuf2-dvb.h b/include/media/videobuf2-dvb.h index 5a31faa24f1a..8605366ec87c 100644 --- a/include/media/videobuf2-dvb.h +++ b/include/media/videobuf2-dvb.h @@ -2,12 +2,11 @@ #ifndef _VIDEOBUF2_DVB_H_ #define _VIDEOBUF2_DVB_H_ -#include <dvbdev.h> -#include <dmxdev.h> -#include <dvb_demux.h> -#include <dvb_net.h> -#include <dvb_frontend.h> - +#include <media/dvbdev.h> +#include <media/dmxdev.h> +#include <media/dvb_demux.h> +#include <media/dvb_net.h> +#include <media/dvb_frontend.h> #include <media/videobuf2-v4l2.h> /* We don't actually need to include media-device.h here */ |