99 files changed, 2096 insertions, 1121 deletions

diff --git a/include/media/atmel-isi.h b/include/media/atmel-isi.h
deleted file mode 100644
index 6008b0985b7b..000000000000
--- a/include/media/atmel-isi.h
+++ /dev/null
@@ -1,131 +0,0 @@
-/*
- * Register definitions for the Atmel Image Sensor Interface.
- *
- * Copyright (C) 2011 Atmel Corporation
- * Josh Wu, <josh.wu@atmel.com>
- *
- * Based on previous work by Lars Haring, <lars.haring@atmel.com>
- * and Sedji Gaouaou
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ATMEL_ISI_H__
-#define __ATMEL_ISI_H__
-
-#include <linux/types.h>
-
-/* ISI_V2 register offsets */
-#define ISI_CFG1				0x0000
-#define ISI_CFG2				0x0004
-#define ISI_PSIZE				0x0008
-#define ISI_PDECF				0x000c
-#define ISI_Y2R_SET0				0x0010
-#define ISI_Y2R_SET1				0x0014
-#define ISI_R2Y_SET0				0x0018
-#define ISI_R2Y_SET1				0x001C
-#define ISI_R2Y_SET2				0x0020
-#define ISI_CTRL				0x0024
-#define ISI_STATUS				0x0028
-#define ISI_INTEN				0x002C
-#define ISI_INTDIS				0x0030
-#define ISI_INTMASK				0x0034
-#define ISI_DMA_CHER				0x0038
-#define ISI_DMA_CHDR				0x003C
-#define ISI_DMA_CHSR				0x0040
-#define ISI_DMA_P_ADDR				0x0044
-#define ISI_DMA_P_CTRL				0x0048
-#define ISI_DMA_P_DSCR				0x004C
-#define ISI_DMA_C_ADDR				0x0050
-#define ISI_DMA_C_CTRL				0x0054
-#define ISI_DMA_C_DSCR				0x0058
-
-/* Bitfields in CFG1 */
-#define ISI_CFG1_HSYNC_POL_ACTIVE_LOW		(1 << 2)
-#define ISI_CFG1_VSYNC_POL_ACTIVE_LOW		(1 << 3)
-#define ISI_CFG1_PIXCLK_POL_ACTIVE_FALLING	(1 << 4)
-#define ISI_CFG1_EMB_SYNC			(1 << 6)
-#define ISI_CFG1_CRC_SYNC			(1 << 7)
-/* Constants for FRATE(ISI_V2) */
-#define		ISI_CFG1_FRATE_CAPTURE_ALL	(0 << 8)
-#define		ISI_CFG1_FRATE_DIV_2		(1 << 8)
-#define		ISI_CFG1_FRATE_DIV_3		(2 << 8)
-#define		ISI_CFG1_FRATE_DIV_4		(3 << 8)
-#define		ISI_CFG1_FRATE_DIV_5		(4 << 8)
-#define		ISI_CFG1_FRATE_DIV_6		(5 << 8)
-#define		ISI_CFG1_FRATE_DIV_7		(6 << 8)
-#define		ISI_CFG1_FRATE_DIV_8		(7 << 8)
-#define		ISI_CFG1_FRATE_DIV_MASK		(7 << 8)
-#define ISI_CFG1_DISCR				(1 << 11)
-#define ISI_CFG1_FULL_MODE			(1 << 12)
-/* Definition for THMASK(ISI_V2) */
-#define		ISI_CFG1_THMASK_BEATS_4		(0 << 13)
-#define		ISI_CFG1_THMASK_BEATS_8		(1 << 13)
-#define		ISI_CFG1_THMASK_BEATS_16	(2 << 13)
-
-/* Bitfields in CFG2 */
-#define ISI_CFG2_GRAYSCALE			(1 << 13)
-/* Constants for YCC_SWAP(ISI_V2) */
-#define		ISI_CFG2_YCC_SWAP_DEFAULT	(0 << 28)
-#define		ISI_CFG2_YCC_SWAP_MODE_1	(1 << 28)
-#define		ISI_CFG2_YCC_SWAP_MODE_2	(2 << 28)
-#define		ISI_CFG2_YCC_SWAP_MODE_3	(3 << 28)
-#define		ISI_CFG2_YCC_SWAP_MODE_MASK	(3 << 28)
-#define ISI_CFG2_IM_VSIZE_OFFSET		0
-#define ISI_CFG2_IM_HSIZE_OFFSET		16
-#define ISI_CFG2_IM_VSIZE_MASK		(0x7FF << ISI_CFG2_IM_VSIZE_OFFSET)
-#define ISI_CFG2_IM_HSIZE_MASK		(0x7FF << ISI_CFG2_IM_HSIZE_OFFSET)
-
-/* Bitfields in CTRL */
-/* Also using in SR(ISI_V2) */
-#define ISI_CTRL_EN				(1 << 0)
-#define ISI_CTRL_CDC				(1 << 8)
-/* Also using in SR/IER/IDR/IMR(ISI_V2) */
-#define ISI_CTRL_DIS				(1 << 1)
-#define ISI_CTRL_SRST				(1 << 2)
-
-/* Bitfields in SR */
-#define ISI_SR_SIP				(1 << 19)
-/* Also using in SR/IER/IDR/IMR */
-#define ISI_SR_VSYNC				(1 << 10)
-#define ISI_SR_PXFR_DONE			(1 << 16)
-#define ISI_SR_CXFR_DONE			(1 << 17)
-#define ISI_SR_P_OVR				(1 << 24)
-#define ISI_SR_C_OVR				(1 << 25)
-#define ISI_SR_CRC_ERR				(1 << 26)
-#define ISI_SR_FR_OVR				(1 << 27)
-
-/* Bitfields in DMA_C_CTRL & in DMA_P_CTRL */
-#define ISI_DMA_CTRL_FETCH			(1 << 0)
-#define ISI_DMA_CTRL_WB				(1 << 1)
-#define ISI_DMA_CTRL_IEN			(1 << 2)
-#define ISI_DMA_CTRL_DONE			(1 << 3)
-
-/* Bitfields in DMA_CHSR/CHER/CHDR */
-#define ISI_DMA_CHSR_P_CH			(1 << 0)
-#define ISI_DMA_CHSR_C_CH			(1 << 1)
-
-/* Definition for isi_platform_data */
-#define ISI_DATAWIDTH_8				0x01
-#define ISI_DATAWIDTH_10			0x02
-
-struct v4l2_async_subdev;
-
-struct isi_platform_data {
-	u8 has_emb_sync;
-	u8 emb_crc_sync;
-	u8 hsync_act_low;
-	u8 vsync_act_low;
-	u8 pclk_act_falling;
-	u8 full_mode;
-	u32 data_width_flags;
-	/* Using for ISI_CFG1 */
-	u32 frate;
-	/* Using for ISI_MCK */
-	u32 mck_hz;
-	struct v4l2_async_subdev **asd;	/* Flat array, arranged in groups */
-	int *asd_sizes;		/* 0-terminated array of asd group sizes */
-};
-
-#endif /* __ATMEL_ISI_H__ */
diff --git a/include/media/davinci/vpbe_display.h b/include/media/davinci/vpbe_display.h
index fa0247ad815f..e14a9370b67e 100644
--- a/include/media/davinci/vpbe_display.h
+++ b/include/media/davinci/vpbe_display.h
@@ -17,6 +17,7 @@
 #include <linux/videodev2.h>
 #include <media/v4l2-common.h>
 #include <media/v4l2-fh.h>
+#include <media/videobuf2-v4l2.h>
 #include <media/videobuf2-dma-contig.h>
 #include <media/davinci/vpbe_types.h>
 #include <media/davinci/vpbe_osd.h>
@@ -64,7 +65,7 @@ struct display_layer_info {
 };
 
 struct vpbe_disp_buffer {
-	struct vb2_buffer vb;
+	struct vb2_v4l2_buffer vb;
 	struct list_head list;
 };
 
diff --git a/include/media/cx2341x.h b/include/media/drv-intf/cx2341x.h
index 9635eebaab09..9635eebaab09 100644
--- a/include/media/cx2341x.h
+++ b/include/media/drv-intf/cx2341x.h
diff --git a/include/media/cx25840.h b/include/media/drv-intf/cx25840.h
index 783c5bdd63eb..783c5bdd63eb 100644
--- a/include/media/cx25840.h
+++ b/include/media/drv-intf/cx25840.h
diff --git a/include/media/exynos-fimc.h b/include/media/drv-intf/exynos-fimc.h
index 69bcd2a07d5c..69bcd2a07d5c 100644
--- a/include/media/exynos-fimc.h
+++ b/include/media/drv-intf/exynos-fimc.h
diff --git a/include/media/msp3400.h b/include/media/drv-intf/msp3400.h
index 90cf22ada8b4..1e6e80213a77 100644
--- a/include/media/msp3400.h
+++ b/include/media/drv-intf/msp3400.h
@@ -223,4 +223,3 @@
  */
 
 #endif /* MSP3400_H */
-
diff --git a/include/media/s3c_camif.h b/include/media/drv-intf/s3c_camif.h
index df96c2c789b4..df96c2c789b4 100644
--- a/include/media/s3c_camif.h
+++ b/include/media/drv-intf/s3c_camif.h
diff --git a/include/media/saa7146.h b/include/media/drv-intf/saa7146.h
index 96058a5a4acc..96058a5a4acc 100644
--- a/include/media/saa7146.h
+++ b/include/media/drv-intf/saa7146.h
diff --git a/include/media/saa7146_vv.h b/include/media/drv-intf/saa7146_vv.h
index 92766f77a5de..0da6ccc0615b 100644
--- a/include/media/saa7146_vv.h
+++ b/include/media/drv-intf/saa7146_vv.h
@@ -4,7 +4,7 @@
 #include <media/v4l2-common.h>
 #include <media/v4l2-ioctl.h>
 #include <media/v4l2-fh.h>
-#include <media/saa7146.h>
+#include <media/drv-intf/saa7146.h>
 #include <media/videobuf-dma-sg.h>
 
 #define MAX_SAA7146_CAPTURE_BUFFERS	32	/* arbitrary */
diff --git a/include/media/sh_mobile_ceu.h b/include/media/drv-intf/sh_mobile_ceu.h
index 7f57056c22ba..7f57056c22ba 100644
--- a/include/media/sh_mobile_ceu.h
+++ b/include/media/drv-intf/sh_mobile_ceu.h
diff --git a/include/media/sh_mobile_csi2.h b/include/media/drv-intf/sh_mobile_csi2.h
index 14030db51f13..14030db51f13 100644
--- a/include/media/sh_mobile_csi2.h
+++ b/include/media/drv-intf/sh_mobile_csi2.h
diff --git a/include/media/sh_vou.h b/include/media/drv-intf/sh_vou.h
index ec3ba9a597a2..ec3ba9a597a2 100644
--- a/include/media/sh_vou.h
+++ b/include/media/drv-intf/sh_vou.h
diff --git a/include/media/si476x.h b/include/media/drv-intf/si476x.h
index e02e241e2d22..ad87fa8483b2 100644
--- a/include/media/si476x.h
+++ b/include/media/drv-intf/si476x.h
@@ -1,5 +1,5 @@
 /*
- * include/media/si476x.h -- Common definitions for si476x driver
+ * include/media/drv-intf/si476x.h -- Common definitions for si476x driver
  *
  * Copyright (C) 2012 Innovative Converged Devices(ICD)
  * Copyright (C) 2013 Andrey Smirnov
diff --git a/include/media/soc_mediabus.h b/include/media/drv-intf/soc_mediabus.h
index 2ff773785fb6..2ff773785fb6 100644
--- a/include/media/soc_mediabus.h
+++ b/include/media/drv-intf/soc_mediabus.h
diff --git a/include/media/tea575x.h b/include/media/drv-intf/tea575x.h
index 5d096578b736..fb272d48ba33 100644
--- a/include/media/tea575x.h
+++ b/include/media/drv-intf/tea575x.h
@@ -63,7 +63,7 @@ struct snd_tea575x {
 	u32 band;			/* 0: FM, 1: FM-Japan, 2: AM */
 	u32 freq;			/* frequency */
 	struct mutex mutex;
-	struct snd_tea575x_ops *ops;
+	const struct snd_tea575x_ops *ops;
 	void *private_data;
 	u8 card[32];
 	u8 bus_info[32];
diff --git a/include/media/gpio-ir-recv.h b/include/media/gpio-ir-recv.h
deleted file mode 100644
index 0142736a59db..000000000000
--- a/include/media/gpio-ir-recv.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* Copyright (c) 2012, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __GPIO_IR_RECV_H__
-#define __GPIO_IR_RECV_H__
-
-struct gpio_ir_recv_platform_data {
-	int		gpio_nr;
-	bool		active_low;
-	u64		allowed_protos;
-	const char	*map_name;
-};
-
-#endif /* __GPIO_IR_RECV_H__ */
-
diff --git a/include/media/ad9389b.h b/include/media/i2c/ad9389b.h
index 5ba9af869b8b..5ba9af869b8b 100644
--- a/include/media/ad9389b.h
+++ b/include/media/i2c/ad9389b.h
diff --git a/include/media/adp1653.h b/include/media/i2c/adp1653.h
index 9779c8549eb4..0b6709335dff 100644
--- a/include/media/adp1653.h
+++ b/include/media/i2c/adp1653.h
@@ -1,5 +1,5 @@
 /*
- * include/media/adp1653.h
+ * include/media/i2c/adp1653.h
  *
  * Copyright (C) 2008--2011 Nokia Corporation
  *
diff --git a/include/media/adv7183.h b/include/media/i2c/adv7183.h
index c5c2d377c0a6..c5c2d377c0a6 100644
--- a/include/media/adv7183.h
+++ b/include/media/i2c/adv7183.h
diff --git a/include/media/adv7343.h b/include/media/i2c/adv7343.h
index e4142b1ef8cd..e4142b1ef8cd 100644
--- a/include/media/adv7343.h
+++ b/include/media/i2c/adv7343.h
diff --git a/include/media/adv7393.h b/include/media/i2c/adv7393.h
index b28edf351842..b28edf351842 100644
--- a/include/media/adv7393.h
+++ b/include/media/i2c/adv7393.h
diff --git a/include/media/adv7511.h b/include/media/i2c/adv7511.h
index d83b91d80764..d83b91d80764 100644
--- a/include/media/adv7511.h
+++ b/include/media/i2c/adv7511.h
diff --git a/include/media/adv7604.h b/include/media/i2c/adv7604.h
index a913859bfd30..a913859bfd30 100644
--- a/include/media/adv7604.h
+++ b/include/media/i2c/adv7604.h
diff --git a/include/media/adv7842.h b/include/media/i2c/adv7842.h
index bc249709bf35..bc249709bf35 100644
--- a/include/media/adv7842.h
+++ b/include/media/i2c/adv7842.h
diff --git a/include/media/ak881x.h b/include/media/i2c/ak881x.h
index b7f2add5ce7b..b7f2add5ce7b 100644
--- a/include/media/ak881x.h
+++ b/include/media/i2c/ak881x.h
diff --git a/include/media/as3645a.h b/include/media/i2c/as3645a.h
index 5075496d2c9e..0e07484ddc33 100644
--- a/include/media/as3645a.h
+++ b/include/media/i2c/as3645a.h
@@ -1,5 +1,5 @@
 /*
- * include/media/as3645a.h
+ * include/media/i2c/as3645a.h
  *
  * Copyright (C) 2008-2011 Nokia Corporation
  *
diff --git a/include/media/bt819.h b/include/media/i2c/bt819.h
index 8025f4bc2bb6..8025f4bc2bb6 100644
--- a/include/media/bt819.h
+++ b/include/media/i2c/bt819.h
diff --git a/include/media/cs5345.h b/include/media/i2c/cs5345.h
index 6ccae24e65ed..6ccae24e65ed 100644
--- a/include/media/cs5345.h
+++ b/include/media/i2c/cs5345.h
diff --git a/include/media/cs53l32a.h b/include/media/i2c/cs53l32a.h
index bf76197d3790..bf76197d3790 100644
--- a/include/media/cs53l32a.h
+++ b/include/media/i2c/cs53l32a.h
diff --git a/include/media/ir-kbd-i2c.h b/include/media/i2c/ir-kbd-i2c.h
index d8564354debb..d8564354debb 100644
--- a/include/media/ir-kbd-i2c.h
+++ b/include/media/i2c/ir-kbd-i2c.h
diff --git a/include/media/lm3560.h b/include/media/i2c/lm3560.h
index 46670706d6f8..5ed942a8ac32 100644
--- a/include/media/lm3560.h
+++ b/include/media/i2c/lm3560.h
@@ -1,5 +1,5 @@
 /*
- * include/media/lm3560.h
+ * include/media/i2c/lm3560.h
  *
  * Copyright (C) 2013 Texas Instruments
  *
diff --git a/include/media/lm3646.h b/include/media/i2c/lm3646.h
index c6acf5a1d640..724c10003a28 100644
--- a/include/media/lm3646.h
+++ b/include/media/i2c/lm3646.h
@@ -1,5 +1,5 @@
 /*
- * include/media/lm3646.h
+ * include/media/i2c/lm3646.h
  *
  * Copyright (C) 2014 Texas Instruments
  *
diff --git a/include/media/m52790.h b/include/media/i2c/m52790.h
index 7ddffae31a67..7ddffae31a67 100644
--- a/include/media/m52790.h
+++ b/include/media/i2c/m52790.h
diff --git a/include/media/m5mols.h b/include/media/i2c/m5mols.h
index 4a825ae5c6c8..4a825ae5c6c8 100644
--- a/include/media/m5mols.h
+++ b/include/media/i2c/m5mols.h
diff --git a/include/media/mt9m032.h b/include/media/i2c/mt9m032.h
index c3a78114d7a6..c3a78114d7a6 100644
--- a/include/media/mt9m032.h
+++ b/include/media/i2c/mt9m032.h
diff --git a/include/media/mt9p031.h b/include/media/i2c/mt9p031.h
index 1ba361205af1..1ba361205af1 100644
--- a/include/media/mt9p031.h
+++ b/include/media/i2c/mt9p031.h
diff --git a/include/media/mt9t001.h b/include/media/i2c/mt9t001.h
index 03fd63edd133..03fd63edd133 100644
--- a/include/media/mt9t001.h
+++ b/include/media/i2c/mt9t001.h
diff --git a/include/media/mt9t112.h b/include/media/i2c/mt9t112.h
index a43c74ab05ec..a43c74ab05ec 100644
--- a/include/media/mt9t112.h
+++ b/include/media/i2c/mt9t112.h
diff --git a/include/media/mt9v011.h b/include/media/i2c/mt9v011.h
index ea29fc74cd06..ea29fc74cd06 100644
--- a/include/media/mt9v011.h
+++ b/include/media/i2c/mt9v011.h
diff --git a/include/media/mt9v022.h b/include/media/i2c/mt9v022.h
index 40561801321a..40561801321a 100644
--- a/include/media/mt9v022.h
+++ b/include/media/i2c/mt9v022.h
diff --git a/include/media/mt9v032.h b/include/media/i2c/mt9v032.h
index 12175a63c5b2..12175a63c5b2 100644
--- a/include/media/mt9v032.h
+++ b/include/media/i2c/mt9v032.h
diff --git a/include/media/noon010pc30.h b/include/media/i2c/noon010pc30.h
index 58eafee36b30..58eafee36b30 100644
--- a/include/media/noon010pc30.h
+++ b/include/media/i2c/noon010pc30.h
diff --git a/include/media/ov2659.h b/include/media/i2c/ov2659.h
index 4216adc1ede2..4216adc1ede2 100644
--- a/include/media/ov2659.h
+++ b/include/media/i2c/ov2659.h
diff --git a/include/media/ov7670.h b/include/media/i2c/ov7670.h
index 1913d5123072..1913d5123072 100644
--- a/include/media/ov7670.h
+++ b/include/media/i2c/ov7670.h
diff --git a/include/media/ov772x.h b/include/media/i2c/ov772x.h
index 00dbb7c4feae..00dbb7c4feae 100644
--- a/include/media/ov772x.h
+++ b/include/media/i2c/ov772x.h
diff --git a/include/media/ov9650.h b/include/media/i2c/ov9650.h
index d630cf9e028d..d630cf9e028d 100644
--- a/include/media/ov9650.h
+++ b/include/media/i2c/ov9650.h
diff --git a/include/media/rj54n1cb0c.h b/include/media/i2c/rj54n1cb0c.h
index 8ae3288ae925..8ae3288ae925 100644
--- a/include/media/rj54n1cb0c.h
+++ b/include/media/i2c/rj54n1cb0c.h
diff --git a/include/media/s5c73m3.h b/include/media/i2c/s5c73m3.h
index ccb9e5448762..ccb9e5448762 100644
--- a/include/media/s5c73m3.h
+++ b/include/media/i2c/s5c73m3.h
diff --git a/include/media/s5k4ecgx.h b/include/media/i2c/s5k4ecgx.h
index 90c1be792ffe..90c1be792ffe 100644
--- a/include/media/s5k4ecgx.h
+++ b/include/media/i2c/s5k4ecgx.h
diff --git a/include/media/s5k6aa.h b/include/media/i2c/s5k6aa.h
index ba34f7055e55..ba34f7055e55 100644
--- a/include/media/s5k6aa.h
+++ b/include/media/i2c/s5k6aa.h
diff --git a/include/media/saa6588.h b/include/media/i2c/saa6588.h
index b5ec1aa60ed5..b5ec1aa60ed5 100644
--- a/include/media/saa6588.h
+++ b/include/media/i2c/saa6588.h
diff --git a/include/media/saa7115.h b/include/media/i2c/saa7115.h
index 76911e71de17..53954c90e7f6 100644
--- a/include/media/saa7115.h
+++ b/include/media/i2c/saa7115.h
@@ -138,4 +138,3 @@ struct saa7115_platform_data {
 };
 
 #endif
-
diff --git a/include/media/saa7127.h b/include/media/i2c/saa7127.h
index bbcf862141af..7005ba7daa9e 100644
--- a/include/media/saa7127.h
+++ b/include/media/i2c/saa7127.h
@@ -38,4 +38,3 @@ enum saa7127_output_type {
 };
 
 #endif
-
diff --git a/include/media/smiapp.h b/include/media/i2c/smiapp.h
index 268a3cdbf6cb..029142ddb95c 100644
--- a/include/media/smiapp.h
+++ b/include/media/i2c/smiapp.h
@@ -1,5 +1,5 @@
 /*
- * include/media/smiapp.h
+ * include/media/i2c/smiapp.h
  *
  * Generic driver for SMIA/SMIA++ compliant camera modules
  *
diff --git a/include/media/sr030pc30.h b/include/media/i2c/sr030pc30.h
index 6f901a653ba2..6f901a653ba2 100644
--- a/include/media/sr030pc30.h
+++ b/include/media/i2c/sr030pc30.h
diff --git a/include/media/tc358743.h b/include/media/i2c/tc358743.h
index 4513f2f9cfbc..4513f2f9cfbc 100644
--- a/include/media/tc358743.h
+++ b/include/media/i2c/tc358743.h
diff --git a/include/media/ths7303.h b/include/media/i2c/ths7303.h
index a7b49297da82..a7b49297da82 100644
--- a/include/media/ths7303.h
+++ b/include/media/i2c/ths7303.h
diff --git a/include/media/tvaudio.h b/include/media/i2c/tvaudio.h
index 1ac8184693f8..1ac8184693f8 100644
--- a/include/media/tvaudio.h
+++ b/include/media/i2c/tvaudio.h
diff --git a/include/media/tvp514x.h b/include/media/i2c/tvp514x.h
index 86ed7e806830..86ed7e806830 100644
--- a/include/media/tvp514x.h
+++ b/include/media/i2c/tvp514x.h
diff --git a/include/media/tvp5150.h b/include/media/i2c/tvp5150.h
index 72bd2a2b8bfd..649908a25605 100644
--- a/include/media/tvp5150.h
+++ b/include/media/i2c/tvp5150.h
@@ -31,4 +31,3 @@
 #define TVP5150_BLACK_SCREEN 1
 
 #endif
-
diff --git a/include/media/tvp7002.h b/include/media/i2c/tvp7002.h
index fadb6afe9ef0..fadb6afe9ef0 100644
--- a/include/media/tvp7002.h
+++ b/include/media/i2c/tvp7002.h
diff --git a/include/media/tw9910.h b/include/media/i2c/tw9910.h
index 90bcf1fa5421..90bcf1fa5421 100644
--- a/include/media/tw9910.h
+++ b/include/media/i2c/tw9910.h
diff --git a/include/media/uda1342.h b/include/media/i2c/uda1342.h
index cd156403a368..cd156403a368 100644
--- a/include/media/uda1342.h
+++ b/include/media/i2c/uda1342.h
diff --git a/include/media/upd64031a.h b/include/media/i2c/upd64031a.h
index 3ad6a32e1bce..3ad6a32e1bce 100644
--- a/include/media/upd64031a.h
+++ b/include/media/i2c/upd64031a.h
diff --git a/include/media/upd64083.h b/include/media/i2c/upd64083.h
index 59b6f32ba300..59b6f32ba300 100644
--- a/include/media/upd64083.h
+++ b/include/media/i2c/upd64083.h
diff --git a/include/media/wm8775.h b/include/media/i2c/wm8775.h
index d0e801a9935c..d0e801a9935c 100644
--- a/include/media/wm8775.h
+++ b/include/media/i2c/wm8775.h
diff --git a/include/media/ir-rx51.h b/include/media/ir-rx51.h
deleted file mode 100644
index 104aa892f31b..000000000000
--- a/include/media/ir-rx51.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifndef _LIRC_RX51_H
-#define _LIRC_RX51_H
-
-struct lirc_rx51_platform_data {
-	int pwm_timer;
-
-	int(*set_max_mpu_wakeup_lat)(struct device *dev, long t);
-};
-
-#endif
diff --git a/include/media/lirc.h b/include/media/lirc.h
index 4b3ab2966b5a..554988c860c1 100644
--- a/include/media/lirc.h
+++ b/include/media/lirc.h
@@ -1,168 +1 @@
-/*
- * lirc.h - linux infrared remote control header file
- * last modified 2010/07/13 by Jarod Wilson
- */
-
-#ifndef _LINUX_LIRC_H
-#define _LINUX_LIRC_H
-
-#include <linux/types.h>
-#include <linux/ioctl.h>
-
-#define PULSE_BIT       0x01000000
-#define PULSE_MASK      0x00FFFFFF
-
-#define LIRC_MODE2_SPACE     0x00000000
-#define LIRC_MODE2_PULSE     0x01000000
-#define LIRC_MODE2_FREQUENCY 0x02000000
-#define LIRC_MODE2_TIMEOUT   0x03000000
-
-#define LIRC_VALUE_MASK      0x00FFFFFF
-#define LIRC_MODE2_MASK      0xFF000000
-
-#define LIRC_SPACE(val) (((val)&LIRC_VALUE_MASK) | LIRC_MODE2_SPACE)
-#define LIRC_PULSE(val) (((val)&LIRC_VALUE_MASK) | LIRC_MODE2_PULSE)
-#define LIRC_FREQUENCY(val) (((val)&LIRC_VALUE_MASK) | LIRC_MODE2_FREQUENCY)
-#define LIRC_TIMEOUT(val) (((val)&LIRC_VALUE_MASK) | LIRC_MODE2_TIMEOUT)
-
-#define LIRC_VALUE(val) ((val)&LIRC_VALUE_MASK)
-#define LIRC_MODE2(val) ((val)&LIRC_MODE2_MASK)
-
-#define LIRC_IS_SPACE(val) (LIRC_MODE2(val) == LIRC_MODE2_SPACE)
-#define LIRC_IS_PULSE(val) (LIRC_MODE2(val) == LIRC_MODE2_PULSE)
-#define LIRC_IS_FREQUENCY(val) (LIRC_MODE2(val) == LIRC_MODE2_FREQUENCY)
-#define LIRC_IS_TIMEOUT(val) (LIRC_MODE2(val) == LIRC_MODE2_TIMEOUT)
-
-/* used heavily by lirc userspace */
-#define lirc_t int
-
-/*** lirc compatible hardware features ***/
-
-#define LIRC_MODE2SEND(x) (x)
-#define LIRC_SEND2MODE(x) (x)
-#define LIRC_MODE2REC(x) ((x) << 16)
-#define LIRC_REC2MODE(x) ((x) >> 16)
-
-#define LIRC_MODE_RAW                  0x00000001
-#define LIRC_MODE_PULSE                0x00000002
-#define LIRC_MODE_MODE2                0x00000004
-#define LIRC_MODE_LIRCCODE             0x00000010
-
-
-#define LIRC_CAN_SEND_RAW              LIRC_MODE2SEND(LIRC_MODE_RAW)
-#define LIRC_CAN_SEND_PULSE            LIRC_MODE2SEND(LIRC_MODE_PULSE)
-#define LIRC_CAN_SEND_MODE2            LIRC_MODE2SEND(LIRC_MODE_MODE2)
-#define LIRC_CAN_SEND_LIRCCODE         LIRC_MODE2SEND(LIRC_MODE_LIRCCODE)
-
-#define LIRC_CAN_SEND_MASK             0x0000003f
-
-#define LIRC_CAN_SET_SEND_CARRIER      0x00000100
-#define LIRC_CAN_SET_SEND_DUTY_CYCLE   0x00000200
-#define LIRC_CAN_SET_TRANSMITTER_MASK  0x00000400
-
-#define LIRC_CAN_REC_RAW               LIRC_MODE2REC(LIRC_MODE_RAW)
-#define LIRC_CAN_REC_PULSE             LIRC_MODE2REC(LIRC_MODE_PULSE)
-#define LIRC_CAN_REC_MODE2             LIRC_MODE2REC(LIRC_MODE_MODE2)
-#define LIRC_CAN_REC_LIRCCODE          LIRC_MODE2REC(LIRC_MODE_LIRCCODE)
-
-#define LIRC_CAN_REC_MASK              LIRC_MODE2REC(LIRC_CAN_SEND_MASK)
-
-#define LIRC_CAN_SET_REC_CARRIER       (LIRC_CAN_SET_SEND_CARRIER << 16)
-#define LIRC_CAN_SET_REC_DUTY_CYCLE    (LIRC_CAN_SET_SEND_DUTY_CYCLE << 16)
-
-#define LIRC_CAN_SET_REC_DUTY_CYCLE_RANGE 0x40000000
-#define LIRC_CAN_SET_REC_CARRIER_RANGE    0x80000000
-#define LIRC_CAN_GET_REC_RESOLUTION       0x20000000
-#define LIRC_CAN_SET_REC_TIMEOUT          0x10000000
-#define LIRC_CAN_SET_REC_FILTER           0x08000000
-
-#define LIRC_CAN_MEASURE_CARRIER          0x02000000
-#define LIRC_CAN_USE_WIDEBAND_RECEIVER    0x04000000
-
-#define LIRC_CAN_SEND(x) ((x)&LIRC_CAN_SEND_MASK)
-#define LIRC_CAN_REC(x) ((x)&LIRC_CAN_REC_MASK)
-
-#define LIRC_CAN_NOTIFY_DECODE            0x01000000
-
-/*** IOCTL commands for lirc driver ***/
-
-#define LIRC_GET_FEATURES              _IOR('i', 0x00000000, __u32)
-
-#define LIRC_GET_SEND_MODE             _IOR('i', 0x00000001, __u32)
-#define LIRC_GET_REC_MODE              _IOR('i', 0x00000002, __u32)
-#define LIRC_GET_SEND_CARRIER          _IOR('i', 0x00000003, __u32)
-#define LIRC_GET_REC_CARRIER           _IOR('i', 0x00000004, __u32)
-#define LIRC_GET_SEND_DUTY_CYCLE       _IOR('i', 0x00000005, __u32)
-#define LIRC_GET_REC_DUTY_CYCLE        _IOR('i', 0x00000006, __u32)
-#define LIRC_GET_REC_RESOLUTION        _IOR('i', 0x00000007, __u32)
-
-#define LIRC_GET_MIN_TIMEOUT           _IOR('i', 0x00000008, __u32)
-#define LIRC_GET_MAX_TIMEOUT           _IOR('i', 0x00000009, __u32)
-
-#define LIRC_GET_MIN_FILTER_PULSE      _IOR('i', 0x0000000a, __u32)
-#define LIRC_GET_MAX_FILTER_PULSE      _IOR('i', 0x0000000b, __u32)
-#define LIRC_GET_MIN_FILTER_SPACE      _IOR('i', 0x0000000c, __u32)
-#define LIRC_GET_MAX_FILTER_SPACE      _IOR('i', 0x0000000d, __u32)
-
-/* code length in bits, currently only for LIRC_MODE_LIRCCODE */
-#define LIRC_GET_LENGTH                _IOR('i', 0x0000000f, __u32)
-
-#define LIRC_SET_SEND_MODE             _IOW('i', 0x00000011, __u32)
-#define LIRC_SET_REC_MODE              _IOW('i', 0x00000012, __u32)
-/* Note: these can reset the according pulse_width */
-#define LIRC_SET_SEND_CARRIER          _IOW('i', 0x00000013, __u32)
-#define LIRC_SET_REC_CARRIER           _IOW('i', 0x00000014, __u32)
-#define LIRC_SET_SEND_DUTY_CYCLE       _IOW('i', 0x00000015, __u32)
-#define LIRC_SET_REC_DUTY_CYCLE        _IOW('i', 0x00000016, __u32)
-#define LIRC_SET_TRANSMITTER_MASK      _IOW('i', 0x00000017, __u32)
-
-/*
- * when a timeout != 0 is set the driver will send a
- * LIRC_MODE2_TIMEOUT data packet, otherwise LIRC_MODE2_TIMEOUT is
- * never sent, timeout is disabled by default
- */
-#define LIRC_SET_REC_TIMEOUT           _IOW('i', 0x00000018, __u32)
-
-/* 1 enables, 0 disables timeout reports in MODE2 */
-#define LIRC_SET_REC_TIMEOUT_REPORTS   _IOW('i', 0x00000019, __u32)
-
-/*
- * pulses shorter than this are filtered out by hardware (software
- * emulation in lirc_dev?)
- */
-#define LIRC_SET_REC_FILTER_PULSE      _IOW('i', 0x0000001a, __u32)
-/*
- * spaces shorter than this are filtered out by hardware (software
- * emulation in lirc_dev?)
- */
-#define LIRC_SET_REC_FILTER_SPACE      _IOW('i', 0x0000001b, __u32)
-/*
- * if filter cannot be set independently for pulse/space, this should
- * be used
- */
-#define LIRC_SET_REC_FILTER            _IOW('i', 0x0000001c, __u32)
-
-/*
- * if enabled from the next key press on the driver will send
- * LIRC_MODE2_FREQUENCY packets
- */
-#define LIRC_SET_MEASURE_CARRIER_MODE	_IOW('i', 0x0000001d, __u32)
-
-/*
- * to set a range use
- * LIRC_SET_REC_DUTY_CYCLE_RANGE/LIRC_SET_REC_CARRIER_RANGE with the
- * lower bound first and later
- * LIRC_SET_REC_DUTY_CYCLE/LIRC_SET_REC_CARRIER with the upper bound
- */
-
-#define LIRC_SET_REC_DUTY_CYCLE_RANGE  _IOW('i', 0x0000001e, __u32)
-#define LIRC_SET_REC_CARRIER_RANGE     _IOW('i', 0x0000001f, __u32)
-
-#define LIRC_NOTIFY_DECODE             _IO('i', 0x00000020)
-
-#define LIRC_SETUP_START               _IO('i', 0x00000021)
-#define LIRC_SETUP_END                 _IO('i', 0x00000022)
-
-#define LIRC_SET_WIDEBAND_RECEIVER     _IOW('i', 0x00000023, __u32)
-
-#endif
+#include <uapi/linux/lirc.h>
diff --git a/include/media/lirc_dev.h b/include/media/lirc_dev.h
index 05e7ad5d2c8b..0ab59a571fee 100644
--- a/include/media/lirc_dev.h
+++ b/include/media/lirc_dev.h
@@ -118,6 +118,71 @@ static inline unsigned int lirc_buffer_write(struct lirc_buffer *buf,
 	return ret;
 }
 
+/**
+ * struct lirc_driver - Defines the parameters on a LIRC driver
+ *
+ * @name:		this string will be used for logs
+ *
+ * @minor:		indicates minor device (/dev/lirc) number for
+ *			registered driver if caller fills it with negative
+ *			value, then the first free minor number will be used
+ *			(if available).
+ *
+ * @code_length:	length of the remote control key code expressed in bits.
+ *
+ * @buffer_size:	Number of FIFO buffers with @chunk_size size. If zero,
+ *			creates a buffer with BUFLEN size (16 bytes).
+ *
+ * @sample_rate:	if zero, the device will wait for an event with a new
+ *			code to be parsed. Otherwise, specifies the sample
+ *			rate for polling. Value should be between 0
+ *			and HZ. If equal to HZ, it would mean one polling per
+ *			second.
+ *
+ * @features:		lirc compatible hardware features, like LIRC_MODE_RAW,
+ *			LIRC_CAN_*, as defined at include/media/lirc.h.
+ *
+ * @chunk_size:		Size of each FIFO buffer.
+ *
+ * @data:		it may point to any driver data and this pointer will
+ *			be passed to all callback functions.
+ *
+ * @min_timeout:	Minimum timeout for record. Valid only if
+ *			LIRC_CAN_SET_REC_TIMEOUT is defined.
+ *
+ * @max_timeout:	Maximum timeout for record. Valid only if
+ *			LIRC_CAN_SET_REC_TIMEOUT is defined.
+ *
+ * @add_to_buf:		add_to_buf will be called after specified period of the
+ *			time or triggered by the external event, this behavior
+ *			depends on value of the sample_rate this function will
+ *			be called in user context. This routine should return
+ *			0 if data was added to the buffer and -ENODATA if none
+ *			was available. This should add some number of bits
+ *			evenly divisible by code_length to the buffer.
+ *
+ * @rbuf:		if not NULL, it will be used as a read buffer, you will
+ *			have to write to the buffer by other means, like irq's
+ *			(see also lirc_serial.c).
+ *
+ * @set_use_inc:	set_use_inc will be called after device is opened
+ *
+ * @set_use_dec:	set_use_dec will be called after device is closed
+ *
+ * @rdev:		Pointed to struct rc_dev associated with the LIRC
+ *			device.
+ *
+ * @fops:		file_operations for drivers which don't fit the current
+ *			driver model.
+ *			Some ioctl's can be directly handled by lirc_dev if the
+ *			driver's ioctl function is NULL or if it returns
+ *			-ENOIOCTLCMD (see also lirc_serial.c).
+ *
+ * @dev:		pointer to the struct device associated with the LIRC
+ *			device.
+ *
+ * @owner:		the module owning this struct
+ */
 struct lirc_driver {
 	char name[40];
 	int minor;
@@ -131,65 +196,16 @@ struct lirc_driver {
 	void *data;
 	int min_timeout;
 	int max_timeout;
-	int (*add_to_buf) (void *data, struct lirc_buffer *buf);
+	int (*add_to_buf)(void *data, struct lirc_buffer *buf);
 	struct lirc_buffer *rbuf;
-	int (*set_use_inc) (void *data);
-	void (*set_use_dec) (void *data);
+	int (*set_use_inc)(void *data);
+	void (*set_use_dec)(void *data);
 	struct rc_dev *rdev;
 	const struct file_operations *fops;
 	struct device *dev;
 	struct module *owner;
 };
 
-/* name:
- * this string will be used for logs
- *
- * minor:
- * indicates minor device (/dev/lirc) number for registered driver
- * if caller fills it with negative value, then the first free minor
- * number will be used (if available)
- *
- * code_length:
- * length of the remote control key code expressed in bits
- *
- * sample_rate:
- *
- * data:
- * it may point to any driver data and this pointer will be passed to
- * all callback functions
- *
- * add_to_buf:
- * add_to_buf will be called after specified period of the time or
- * triggered by the external event, this behavior depends on value of
- * the sample_rate this function will be called in user context. This
- * routine should return 0 if data was added to the buffer and
- * -ENODATA if none was available. This should add some number of bits
- * evenly divisible by code_length to the buffer
- *
- * rbuf:
- * if not NULL, it will be used as a read buffer, you will have to
- * write to the buffer by other means, like irq's (see also
- * lirc_serial.c).
- *
- * set_use_inc:
- * set_use_inc will be called after device is opened
- *
- * set_use_dec:
- * set_use_dec will be called after device is closed
- *
- * fops:
- * file_operations for drivers which don't fit the current driver model.
- *
- * Some ioctl's can be directly handled by lirc_dev if the driver's
- * ioctl function is NULL or if it returns -ENOIOCTLCMD (see also
- * lirc_serial.c).
- *
- * owner:
- * the module owning this struct
- *
- */
-
-
 /* following functions can be called ONLY from user context
  *
  * returns negative value on error or minor number
diff --git a/include/media/media-device.h b/include/media/media-device.h
index 6e6db78f1ee2..d3855898c3fc 100644
--- a/include/media/media-device.h
+++ b/include/media/media-device.h
@@ -30,6 +30,238 @@
 #include <media/media-devnode.h>
 #include <media/media-entity.h>
 
+/**
+ * DOC: Media Controller
+ *
+ * The media controller userspace API is documented in DocBook format in
+ * Documentation/DocBook/media/v4l/media-controller.xml. This document focus
+ * on the kernel-side implementation of the media framework.
+ *
+ * * Abstract media device model:
+ *
+ * Discovering a device internal topology, and configuring it at runtime, is one
+ * of the goals of the media framework. To achieve this, hardware devices are
+ * modelled as an oriented graph of building blocks called entities connected
+ * through pads.
+ *
+ * An entity is a basic media hardware building block. It can correspond to
+ * a large variety of logical blocks such as physical hardware devices
+ * (CMOS sensor for instance), logical hardware devices (a building block
+ * in a System-on-Chip image processing pipeline), DMA channels or physical
+ * connectors.
+ *
+ * A pad is a connection endpoint through which an entity can interact with
+ * other entities. Data (not restricted to video) produced by an entity
+ * flows from the entity's output to one or more entity inputs. Pads should
+ * not be confused with physical pins at chip boundaries.
+ *
+ * A link is a point-to-point oriented connection between two pads, either
+ * on the same entity or on different entities. Data flows from a source
+ * pad to a sink pad.
+ *
+ *
+ * * Media device:
+ *
+ * A media device is represented by a struct &media_device instance, defined in
+ * include/media/media-device.h. Allocation of the structure is handled by the
+ * media device driver, usually by embedding the &media_device instance in a
+ * larger driver-specific structure.
+ *
+ * Drivers register media device instances by calling
+ *	__media_device_register() via the macro media_device_register()
+ * and unregistered by calling
+ *	media_device_unregister().
+ *
+ * * Entities, pads and links:
+ *
+ * - Entities
+ *
+ * Entities are represented by a struct &media_entity instance, defined in
+ * include/media/media-entity.h. The structure is usually embedded into a
+ * higher-level structure, such as a v4l2_subdev or video_device instance,
+ * although drivers can allocate entities directly.
+ *
+ * Drivers initialize entity pads by calling
+ *	media_entity_pads_init().
+ *
+ * Drivers register entities with a media device by calling
+ *	media_device_register_entity()
+ * and unregistred by calling
+ *	media_device_unregister_entity().
+ *
+ * - Interfaces
+ *
+ * Interfaces are represented by a struct &media_interface instance, defined in
+ * include/media/media-entity.h. Currently, only one type of interface is
+ * defined: a device node. Such interfaces are represented by a struct
+ * &media_intf_devnode.
+ *
+ * Drivers initialize and create device node interfaces by calling
+ *	media_devnode_create()
+ * and remove them by calling:
+ *	media_devnode_remove().
+ *
+ * - Pads
+ *
+ * Pads are represented by a struct &media_pad instance, defined in
+ * include/media/media-entity.h. Each entity stores its pads in a pads array
+ * managed by the entity driver. Drivers usually embed the array in a
+ * driver-specific structure.
+ *
+ * Pads are identified by their entity and their 0-based index in the pads
+ * array.
+ * Both information are stored in the &media_pad structure, making the
+ * &media_pad pointer the canonical way to store and pass link references.
+ *
+ * Pads have flags that describe the pad capabilities and state.
+ *
+ *	%MEDIA_PAD_FL_SINK indicates that the pad supports sinking data.
+ *	%MEDIA_PAD_FL_SOURCE indicates that the pad supports sourcing data.
+ *
+ * NOTE: One and only one of %MEDIA_PAD_FL_SINK and %MEDIA_PAD_FL_SOURCE must
+ * be set for each pad.
+ *
+ * - Links
+ *
+ * Links are represented by a struct &media_link instance, defined in
+ * include/media/media-entity.h. There are two types of links:
+ *
+ * 1. pad to pad links:
+ *
+ * Associate two entities via their PADs. Each entity has a list that points
+ * to all links originating at or targeting any of its pads.
+ * A given link is thus stored twice, once in the source entity and once in
+ * the target entity.
+ *
+ * Drivers create pad to pad links by calling:
+ *	media_create_pad_link() and remove with media_entity_remove_links().
+ *
+ * 2. interface to entity links:
+ *
+ * Associate one interface to a Link.
+ *
+ * Drivers create interface to entity links by calling:
+ *	media_create_intf_link() and remove with media_remove_intf_links().
+ *
+ * NOTE:
+ *
+ * Links can only be created after having both ends already created.
+ *
+ * Links have flags that describe the link capabilities and state. The
+ * valid values are described at media_create_pad_link() and
+ * media_create_intf_link().
+ *
+ * Graph traversal:
+ *
+ * The media framework provides APIs to iterate over entities in a graph.
+ *
+ * To iterate over all entities belonging to a media device, drivers can use
+ * the media_device_for_each_entity macro, defined in
+ * include/media/media-device.h.
+ *
+ * 	struct media_entity *entity;
+ *
+ * 	media_device_for_each_entity(entity, mdev) {
+ * 		// entity will point to each entity in turn
+ * 		...
+ * 	}
+ *
+ * Drivers might also need to iterate over all entities in a graph that can be
+ * reached only through enabled links starting at a given entity. The media
+ * framework provides a depth-first graph traversal API for that purpose.
+ *
+ * Note that graphs with cycles (whether directed or undirected) are *NOT*
+ * supported by the graph traversal API. To prevent infinite loops, the graph
+ * traversal code limits the maximum depth to MEDIA_ENTITY_ENUM_MAX_DEPTH,
+ * currently defined as 16.
+ *
+ * Drivers initiate a graph traversal by calling
+ *	media_entity_graph_walk_start()
+ *
+ * The graph structure, provided by the caller, is initialized to start graph
+ * traversal at the given entity.
+ *
+ * Drivers can then retrieve the next entity by calling
+ *	media_entity_graph_walk_next()
+ *
+ * When the graph traversal is complete the function will return NULL.
+ *
+ * Graph traversal can be interrupted at any moment. No cleanup function call
+ * is required and the graph structure can be freed normally.
+ *
+ * Helper functions can be used to find a link between two given pads, or a pad
+ * connected to another pad through an enabled link
+ *	media_entity_find_link() and media_entity_remote_pad()
+ *
+ * Use count and power handling:
+ *
+ * Due to the wide differences between drivers regarding power management
+ * needs, the media controller does not implement power management. However,
+ * the &media_entity structure includes a use_count field that media drivers
+ * can use to track the number of users of every entity for power management
+ * needs.
+ *
+ * The &media_entity.@use_count field is owned by media drivers and must not be
+ * touched by entity drivers. Access to the field must be protected by the
+ * &media_device.@graph_mutex lock.
+ *
+ * Links setup:
+ *
+ * Link properties can be modified at runtime by calling
+ *	media_entity_setup_link()
+ *
+ * Pipelines and media streams:
+ *
+ * When starting streaming, drivers must notify all entities in the pipeline to
+ * prevent link states from being modified during streaming by calling
+ *	media_entity_pipeline_start().
+ *
+ * The function will mark all entities connected to the given entity through
+ * enabled links, either directly or indirectly, as streaming.
+ *
+ * The &media_pipeline instance pointed to by the pipe argument will be stored
+ * in every entity in the pipeline. Drivers should embed the &media_pipeline
+ * structure in higher-level pipeline structures and can then access the
+ * pipeline through the &media_entity pipe field.
+ *
+ * Calls to media_entity_pipeline_start() can be nested. The pipeline pointer
+ * must be identical for all nested calls to the function.
+ *
+ * media_entity_pipeline_start() may return an error. In that case, it will
+ * clean up any of the changes it did by itself.
+ *
+ * When stopping the stream, drivers must notify the entities with
+ *	media_entity_pipeline_stop().
+ *
+ * If multiple calls to media_entity_pipeline_start() have been made the same
+ * number of media_entity_pipeline_stop() calls are required to stop streaming.
+ * The &media_entity pipe field is reset to NULL on the last nested stop call.
+ *
+ * Link configuration will fail with -%EBUSY by default if either end of the
+ * link is a streaming entity. Links that can be modified while streaming must
+ * be marked with the %MEDIA_LNK_FL_DYNAMIC flag.
+ *
+ * If other operations need to be disallowed on streaming entities (such as
+ * changing entities configuration parameters) drivers can explicitly check the
+ * media_entity stream_count field to find out if an entity is streaming. This
+ * operation must be done with the media_device graph_mutex held.
+ *
+ * Link validation:
+ *
+ * Link validation is performed by media_entity_pipeline_start() for any
+ * entity which has sink pads in the pipeline. The
+ * &media_entity.@link_validate() callback is used for that purpose. In
+ * @link_validate() callback, entity driver should check that the properties of
+ * the source pad of the connected entity and its own sink pad match. It is up
+ * to the type of the entity (and in the end, the properties of the hardware)
+ * what matching actually means.
+ *
+ * Subsystems should facilitate link validation by providing subsystem specific
+ * helper functions to provide easy access for commonly needed information, and
+ * in the end provide a way to use driver-specific callbacks.
+ */
+
+struct ida;
 struct device;
 
 /**
@@ -41,8 +273,16 @@ struct device;
  * @bus_info:	Unique and stable device location identifier
  * @hw_revision: Hardware device revision
  * @driver_version: Device driver version
- * @entity_id:	ID of the next entity to be registered
+ * @topology_version: Monotonic counter for storing the version of the graph
+ *		topology. Should be incremented each time the topology changes.
+ * @id:		Unique ID used on the last registered graph object
+ * @entity_internal_idx: Unique internal entity ID used by the graph traversal
+ *		algorithms
+ * @entity_internal_idx_max: Allocated internal entity indices
  * @entities:	List of registered entities
+ * @interfaces:	List of registered interfaces
+ * @pads:	List of registered pads
+ * @links:	List of registered links
  * @lock:	Entities list lock
  * @graph_mutex: Entities graph operation lock
  * @link_notify: Link state change notification callback
@@ -68,10 +308,18 @@ struct media_device {
 	u32 hw_revision;
 	u32 driver_version;
 
-	u32 entity_id;
+	u32 topology_version;
+
+	u32 id;
+	struct ida entity_internal_idx;
+	int entity_internal_idx_max;
+
 	struct list_head entities;
+	struct list_head interfaces;
+	struct list_head pads;
+	struct list_head links;
 
-	/* Protects the entities list */
+	/* Protects the graph objects creation/removal */
 	spinlock_t lock;
 	/* Serializes graph operations. */
 	struct mutex graph_mutex;
@@ -80,6 +328,8 @@ struct media_device {
 			   unsigned int notification);
 };
 
+#ifdef CONFIG_MEDIA_CONTROLLER
+
 /* Supported link_notify @notification values. */
 #define MEDIA_DEV_NOTIFY_PRE_LINK_CH	0
 #define MEDIA_DEV_NOTIFY_POST_LINK_CH	1
@@ -87,17 +337,228 @@ struct media_device {
 /* media_devnode to media_device */
 #define to_media_device(node) container_of(node, struct media_device, devnode)
 
+/**
+ * media_entity_enum_init - Initialise an entity enumeration
+ *
+ * @ent_enum: Entity enumeration to be initialised
+ * @mdev: The related media device
+ *
+ * Returns zero on success or a negative error code.
+ */
+static inline __must_check int media_entity_enum_init(
+	struct media_entity_enum *ent_enum, struct media_device *mdev)
+{
+	return __media_entity_enum_init(ent_enum,
+					mdev->entity_internal_idx_max + 1);
+}
+
+/**
+ * media_device_init() - Initializes a media device element
+ *
+ * @mdev:	pointer to struct &media_device
+ *
+ * This function initializes the media device prior to its registration.
+ * The media device initialization and registration is split in two functions
+ * to avoid race conditions and make the media device available to user-space
+ * before the media graph has been completed.
+ *
+ * So drivers need to first initialize the media device, register any entity
+ * within the media device, create pad to pad links and then finally register
+ * the media device by calling media_device_register() as a final step.
+ */
+void media_device_init(struct media_device *mdev);
+
+/**
+ * media_device_cleanup() - Cleanups a media device element
+ *
+ * @mdev:	pointer to struct &media_device
+ *
+ * This function that will destroy the graph_mutex that is
+ * initialized in media_device_init().
+ */
+void media_device_cleanup(struct media_device *mdev);
+
+/**
+ * __media_device_register() - Registers a media device element
+ *
+ * @mdev:	pointer to struct &media_device
+ * @owner:	should be filled with %THIS_MODULE
+ *
+ * Users, should, instead, call the media_device_register() macro.
+ *
+ * The caller is responsible for initializing the media_device structure before
+ * registration. The following fields must be set:
+ *
+ *  - dev must point to the parent device (usually a &pci_dev, &usb_interface or
+ *    &platform_device instance).
+ *
+ *  - model must be filled with the device model name as a NUL-terminated UTF-8
+ *    string. The device/model revision must not be stored in this field.
+ *
+ * The following fields are optional:
+ *
+ *  - serial is a unique serial number stored as a NUL-terminated ASCII string.
+ *    The field is big enough to store a GUID in text form. If the hardware
+ *    doesn't provide a unique serial number this field must be left empty.
+ *
+ *  - bus_info represents the location of the device in the system as a
+ *    NUL-terminated ASCII string. For PCI/PCIe devices bus_info must be set to
+ *    "PCI:" (or "PCIe:") followed by the value of pci_name(). For USB devices,
+ *    the usb_make_path() function must be used. This field is used by
+ *    applications to distinguish between otherwise identical devices that don't
+ *    provide a serial number.
+ *
+ *  - hw_revision is the hardware device revision in a driver-specific format.
+ *    When possible the revision should be formatted with the KERNEL_VERSION
+ *    macro.
+ *
+ *  - driver_version is formatted with the KERNEL_VERSION macro. The version
+ *    minor must be incremented when new features are added to the userspace API
+ *    without breaking binary compatibility. The version major must be
+ *    incremented when binary compatibility is broken.
+ *
+ * Notes:
+ *
+ * Upon successful registration a character device named media[0-9]+ is created.
+ * The device major and minor numbers are dynamic. The model name is exported as
+ * a sysfs attribute.
+ *
+ * Unregistering a media device that hasn't been registered is *NOT* safe.
+ *
+ * Return: returns zero on success or a negative error code.
+ */
 int __must_check __media_device_register(struct media_device *mdev,
 					 struct module *owner);
 #define media_device_register(mdev) __media_device_register(mdev, THIS_MODULE)
+
+/**
+ * __media_device_unregister() - Unegisters a media device element
+ *
+ * @mdev:	pointer to struct &media_device
+ *
+ *
+ * It is safe to call this function on an unregistered (but initialised)
+ * media device.
+ */
 void media_device_unregister(struct media_device *mdev);
 
+/**
+ * media_device_register_entity() - registers a media entity inside a
+ *	previously registered media device.
+ *
+ * @mdev:	pointer to struct &media_device
+ * @entity:	pointer to struct &media_entity to be registered
+ *
+ * Entities are identified by a unique positive integer ID. The media
+ * controller framework will such ID automatically. IDs are not guaranteed
+ * to be contiguous, and the ID number can change on newer Kernel versions.
+ * So, neither the driver nor userspace should hardcode ID numbers to refer
+ * to the entities, but, instead, use the framework to find the ID, when
+ * needed.
+ *
+ * The media_entity name, type and flags fields should be initialized before
+ * calling media_device_register_entity(). Entities embedded in higher-level
+ * standard structures can have some of those fields set by the higher-level
+ * framework.
+ *
+ * If the device has pads, media_entity_pads_init() should be called before
+ * this function. Otherwise, the &media_entity.@pad and &media_entity.@num_pads
+ * should be zeroed before calling this function.
+ *
+ * Entities have flags that describe the entity capabilities and state:
+ *
+ * %MEDIA_ENT_FL_DEFAULT indicates the default entity for a given type.
+ *	This can be used to report the default audio and video devices or the
+ *	default camera sensor.
+ *
+ * NOTE: Drivers should set the entity function before calling this function.
+ * Please notice that the values %MEDIA_ENT_F_V4L2_SUBDEV_UNKNOWN and
+ * %MEDIA_ENT_F_UNKNOWN should not be used by the drivers.
+ */
 int __must_check media_device_register_entity(struct media_device *mdev,
 					      struct media_entity *entity);
+
+/*
+ * media_device_unregister_entity() - unregisters a media entity.
+ *
+ * @entity:	pointer to struct &media_entity to be unregistered
+ *
+ * All links associated with the entity and all PADs are automatically
+ * unregistered from the media_device when this function is called.
+ *
+ * Unregistering an entity will not change the IDs of the other entities and
+ * the previoully used ID will never be reused for a newly registered entities.
+ *
+ * When a media device is unregistered, all its entities are unregistered
+ * automatically. No manual entities unregistration is then required.
+ *
+ * Note: the media_entity instance itself must be freed explicitly by
+ * the driver if required.
+ */
 void media_device_unregister_entity(struct media_entity *entity);
 
+/**
+ * media_device_get_devres() -	get media device as device resource
+ *				creates if one doesn't exist
+ *
+ * @dev: pointer to struct &device.
+ *
+ * Sometimes, the media controller &media_device needs to be shared by more
+ * than one driver. This function adds support for that, by dynamically
+ * allocating the &media_device and allowing it to be obtained from the
+ * struct &device associated with the common device where all sub-device
+ * components belong. So, for example, on an USB device with multiple
+ * interfaces, each interface may be handled by a separate per-interface
+ * drivers. While each interface have its own &device, they all share a
+ * common &device associated with the hole USB device.
+ */
+struct media_device *media_device_get_devres(struct device *dev);
+
+/**
+ * media_device_find_devres() - find media device as device resource
+ *
+ * @dev: pointer to struct &device.
+ */
+struct media_device *media_device_find_devres(struct device *dev);
+
 /* Iterate over all entities. */
 #define media_device_for_each_entity(entity, mdev)			\
-	list_for_each_entry(entity, &(mdev)->entities, list)
+	list_for_each_entry(entity, &(mdev)->entities, graph_obj.list)
+
+/* Iterate over all interfaces. */
+#define media_device_for_each_intf(intf, mdev)			\
+	list_for_each_entry(intf, &(mdev)->interfaces, graph_obj.list)
+
+/* Iterate over all pads. */
+#define media_device_for_each_pad(pad, mdev)			\
+	list_for_each_entry(pad, &(mdev)->pads, graph_obj.list)
 
+/* Iterate over all links. */
+#define media_device_for_each_link(link, mdev)			\
+	list_for_each_entry(link, &(mdev)->links, graph_obj.list)
+#else
+static inline int media_device_register(struct media_device *mdev)
+{
+	return 0;
+}
+static inline void media_device_unregister(struct media_device *mdev)
+{
+}
+static inline int media_device_register_entity(struct media_device *mdev,
+						struct media_entity *entity)
+{
+	return 0;
+}
+static inline void media_device_unregister_entity(struct media_entity *entity)
+{
+}
+static inline struct media_device *media_device_get_devres(struct device *dev)
+{
+	return NULL;
+}
+static inline struct media_device *media_device_find_devres(struct device *dev)
+{
+	return NULL;
+}
+#endif /* CONFIG_MEDIA_CONTROLLER */
 #endif
diff --git a/include/media/media-devnode.h b/include/media/media-devnode.h
index 17ddae32060d..fe42f08e72bd 100644
--- a/include/media/media-devnode.h
+++ b/include/media/media-devnode.h
@@ -40,6 +40,20 @@
  */
 #define MEDIA_FLAG_REGISTERED	0
 
+/**
+ * struct media_file_operations - Media device file operations
+ *
+ * @owner: should be filled with %THIS_MODULE
+ * @read: pointer to the function that implements read() syscall
+ * @write: pointer to the function that implements write() syscall
+ * @poll: pointer to the function that implements poll() syscall
+ * @ioctl: pointer to the function that implements ioctl() syscall
+ * @compat_ioctl: pointer to the function that will handle 32 bits userspace
+ *	calls to the the ioctl() syscall on a Kernel compiled with 64 bits.
+ * @open: pointer to the function that implements open() syscall
+ * @release: pointer to the function that will release the resources allocated
+ *	by the @open function.
+ */
 struct media_file_operations {
 	struct module *owner;
 	ssize_t (*read) (struct file *, char __user *, size_t, loff_t *);
@@ -53,7 +67,7 @@ struct media_file_operations {
 
 /**
  * struct media_devnode - Media device node
- * @fops:	pointer to struct media_file_operations with media device ops
+ * @fops:	pointer to struct &media_file_operations with media device ops
  * @dev:	struct device pointer for the media controller device
  * @cdev:	struct cdev pointer character device
  * @parent:	parent device
@@ -86,15 +100,53 @@ struct media_devnode {
 /* dev to media_devnode */
 #define to_media_devnode(cd) container_of(cd, struct media_devnode, dev)
 
+/**
+ * media_devnode_register - register a media device node
+ *
+ * @mdev: media device node structure we want to register
+ * @owner: should be filled with %THIS_MODULE
+ *
+ * The registration code assigns minor numbers and registers the new device node
+ * with the kernel. An error is returned if no free minor number can be found,
+ * or if the registration of the device node fails.
+ *
+ * Zero is returned on success.
+ *
+ * Note that if the media_devnode_register call fails, the release() callback of
+ * the media_devnode structure is *not* called, so the caller is responsible for
+ * freeing any data.
+ */
 int __must_check media_devnode_register(struct media_devnode *mdev,
 					struct module *owner);
+
+/**
+ * media_devnode_unregister - unregister a media device node
+ * @mdev: the device node to unregister
+ *
+ * This unregisters the passed device. Future open calls will be met with
+ * errors.
+ *
+ * This function can safely be called if the device node has never been
+ * registered or has already been unregistered.
+ */
 void media_devnode_unregister(struct media_devnode *mdev);
 
+/**
+ * media_devnode_data - returns a pointer to the &media_devnode
+ *
+ * @filp: pointer to struct &file
+ */
 static inline struct media_devnode *media_devnode_data(struct file *filp)
 {
 	return filp->private_data;
 }
 
+/**
+ * media_devnode_is_registered - returns true if &media_devnode is registered;
+ *	false otherwise.
+ *
+ * @mdev: pointer to struct &media_devnode.
+ */
 static inline int media_devnode_is_registered(struct media_devnode *mdev)
 {
 	return test_bit(MEDIA_FLAG_REGISTERED, &mdev->flags);
diff --git a/include/media/media-entity.h b/include/media/media-entity.h
index 0c003d817493..fe485d367985 100644
--- a/include/media/media-entity.h
+++ b/include/media/media-entity.h
@@ -23,25 +23,151 @@
 #ifndef _MEDIA_ENTITY_H
 #define _MEDIA_ENTITY_H
 
-#include <linux/bitops.h>
+#include <linux/bitmap.h>
 #include <linux/kernel.h>
 #include <linux/list.h>
 #include <linux/media.h>
 
+/* Enums used internally at the media controller to represent graphs */
+
+/**
+ * enum media_gobj_type - type of a graph object
+ *
+ * @MEDIA_GRAPH_ENTITY:		Identify a media entity
+ * @MEDIA_GRAPH_PAD:		Identify a media pad
+ * @MEDIA_GRAPH_LINK:		Identify a media link
+ * @MEDIA_GRAPH_INTF_DEVNODE:	Identify a media Kernel API interface via
+ *				a device node
+ */
+enum media_gobj_type {
+	MEDIA_GRAPH_ENTITY,
+	MEDIA_GRAPH_PAD,
+	MEDIA_GRAPH_LINK,
+	MEDIA_GRAPH_INTF_DEVNODE,
+};
+
+#define MEDIA_BITS_PER_TYPE		8
+#define MEDIA_BITS_PER_ID		(32 - MEDIA_BITS_PER_TYPE)
+#define MEDIA_ID_MASK			 GENMASK_ULL(MEDIA_BITS_PER_ID - 1, 0)
+
+/* Structs to represent the objects that belong to a media graph */
+
+/**
+ * struct media_gobj - Define a graph object.
+ *
+ * @mdev:	Pointer to the struct media_device that owns the object
+ * @id:		Non-zero object ID identifier. The ID should be unique
+ *		inside a media_device, as it is composed by
+ *		%MEDIA_BITS_PER_TYPE to store the type plus
+ *		%MEDIA_BITS_PER_ID to store the ID
+ * @list:	List entry stored in one of the per-type mdev object lists
+ *
+ * All objects on the media graph should have this struct embedded
+ */
+struct media_gobj {
+	struct media_device	*mdev;
+	u32			id;
+	struct list_head	list;
+};
+
+#define MEDIA_ENTITY_ENUM_MAX_DEPTH	16
+
+/**
+ * struct media_entity_enum - An enumeration of media entities.
+ *
+ * @bmap:	Bit map in which each bit represents one entity at struct
+ *		media_entity->internal_idx.
+ * @idx_max:	Number of bits in bmap
+ */
+struct media_entity_enum {
+	unsigned long *bmap;
+	int idx_max;
+};
+
+/**
+ * struct media_entity_graph - Media graph traversal state
+ *
+ * @stack:		Graph traversal stack; the stack contains information
+ *			on the path the media entities to be walked and the
+ *			links through which they were reached.
+ * @ent_enum:		Visited entities
+ * @top:		The top of the stack
+ */
+struct media_entity_graph {
+	struct {
+		struct media_entity *entity;
+		struct list_head *link;
+	} stack[MEDIA_ENTITY_ENUM_MAX_DEPTH];
+
+	struct media_entity_enum ent_enum;
+	int top;
+};
+
+/*
+ * struct media_pipeline - Media pipeline related information
+ *
+ * @streaming_count:	Streaming start count - streaming stop count
+ * @graph:		Media graph walk during pipeline start / stop
+ */
 struct media_pipeline {
+	int streaming_count;
+	struct media_entity_graph graph;
 };
 
+/**
+ * struct media_link - A link object part of a media graph.
+ *
+ * @graph_obj:	Embedded structure containing the media object common data
+ * @list:	Linked list associated with an entity or an interface that
+ *		owns the link.
+ * @gobj0:	Part of a union. Used to get the pointer for the first
+ *		graph_object of the link.
+ * @source:	Part of a union. Used only if the first object (gobj0) is
+ *		a pad. In that case, it represents the source pad.
+ * @intf:	Part of a union. Used only if the first object (gobj0) is
+ *		an interface.
+ * @gobj1:	Part of a union. Used to get the pointer for the second
+ *		graph_object of the link.
+ * @source:	Part of a union. Used only if the second object (gobj1) is
+ *		a pad. In that case, it represents the sink pad.
+ * @entity:	Part of a union. Used only if the second object (gobj1) is
+ *		an entity.
+ * @reverse:	Pointer to the link for the reverse direction of a pad to pad
+ *		link.
+ * @flags:	Link flags, as defined in uapi/media.h (MEDIA_LNK_FL_*)
+ * @is_backlink: Indicate if the link is a backlink.
+ */
 struct media_link {
-	struct media_pad *source;	/* Source pad */
-	struct media_pad *sink;		/* Sink pad  */
-	struct media_link *reverse;	/* Link in the reverse direction */
-	unsigned long flags;		/* Link flags (MEDIA_LNK_FL_*) */
+	struct media_gobj graph_obj;
+	struct list_head list;
+	union {
+		struct media_gobj *gobj0;
+		struct media_pad *source;
+		struct media_interface *intf;
+	};
+	union {
+		struct media_gobj *gobj1;
+		struct media_pad *sink;
+		struct media_entity *entity;
+	};
+	struct media_link *reverse;
+	unsigned long flags;
+	bool is_backlink;
 };
 
+/**
+ * struct media_pad - A media pad graph object.
+ *
+ * @graph_obj:	Embedded structure containing the media object common data
+ * @entity:	Entity this pad belongs to
+ * @index:	Pad index in the entity pads array, numbered from 0 to n
+ * @flags:	Pad flags, as defined in uapi/media.h (MEDIA_PAD_FL_*)
+ */
 struct media_pad {
-	struct media_entity *entity;	/* Entity this pad belongs to */
-	u16 index;			/* Pad index in the entity pads array */
-	unsigned long flags;		/* Pad flags (MEDIA_PAD_FL_*) */
+	struct media_gobj graph_obj;	/* must be first field in struct */
+	struct media_entity *entity;
+	u16 index;
+	unsigned long flags;
 };
 
 /**
@@ -60,98 +186,763 @@ struct media_entity_operations {
 	int (*link_validate)(struct media_link *link);
 };
 
+/**
+ * struct media_entity - A media entity graph object.
+ *
+ * @graph_obj:	Embedded structure containing the media object common data.
+ * @name:	Entity name.
+ * @function:	Entity main function, as defined in uapi/media.h
+ *		(MEDIA_ENT_F_*)
+ * @flags:	Entity flags, as defined in uapi/media.h (MEDIA_ENT_FL_*)
+ * @num_pads:	Number of sink and source pads.
+ * @num_links:	Total number of links, forward and back, enabled and disabled.
+ * @num_backlinks: Number of backlinks
+ * @internal_idx: An unique internal entity specific number. The numbers are
+ *		re-used if entities are unregistered or registered again.
+ * @pads:	Pads array with the size defined by @num_pads.
+ * @links:	List of data links.
+ * @ops:	Entity operations.
+ * @stream_count: Stream count for the entity.
+ * @use_count:	Use count for the entity.
+ * @pipe:	Pipeline this entity belongs to.
+ * @info:	Union with devnode information.  Kept just for backward
+ *		compatibility.
+ * @major:	Devnode major number (zero if not applicable). Kept just
+ *		for backward compatibility.
+ * @minor:	Devnode minor number (zero if not applicable). Kept just
+ *		for backward compatibility.
+ *
+ * NOTE: @stream_count and @use_count reference counts must never be
+ * negative, but are signed integers on purpose: a simple WARN_ON(<0) check
+ * can be used to detect reference count bugs that would make them negative.
+ */
 struct media_entity {
-	struct list_head list;
-	struct media_device *parent;	/* Media device this entity belongs to*/
-	u32 id;				/* Entity ID, unique in the parent media
-					 * device context */
-	const char *name;		/* Entity name */
-	u32 type;			/* Entity type (MEDIA_ENT_T_*) */
-	u32 revision;			/* Entity revision, driver specific */
-	unsigned long flags;		/* Entity flags (MEDIA_ENT_FL_*) */
-	u32 group_id;			/* Entity group ID */
-
-	u16 num_pads;			/* Number of sink and source pads */
-	u16 num_links;			/* Number of existing links, both
-					 * enabled and disabled */
-	u16 num_backlinks;		/* Number of backlinks */
-	u16 max_links;			/* Maximum number of links */
-
-	struct media_pad *pads;		/* Pads array (num_pads elements) */
-	struct media_link *links;	/* Links array (max_links elements)*/
-
-	const struct media_entity_operations *ops;	/* Entity operations */
+	struct media_gobj graph_obj;	/* must be first field in struct */
+	const char *name;
+	u32 function;
+	unsigned long flags;
+
+	u16 num_pads;
+	u16 num_links;
+	u16 num_backlinks;
+	int internal_idx;
+
+	struct media_pad *pads;
+	struct list_head links;
+
+	const struct media_entity_operations *ops;
 
 	/* Reference counts must never be negative, but are signed integers on
 	 * purpose: a simple WARN_ON(<0) check can be used to detect reference
 	 * count bugs that would make them negative.
 	 */
-	int stream_count;		/* Stream count for the entity. */
-	int use_count;			/* Use count for the entity. */
+	int stream_count;
+	int use_count;
 
-	struct media_pipeline *pipe;	/* Pipeline this entity belongs to. */
+	struct media_pipeline *pipe;
 
 	union {
-		/* Node specifications */
 		struct {
 			u32 major;
 			u32 minor;
 		} dev;
-
-		/* Sub-device specifications */
-		/* Nothing needed yet */
 	} info;
 };
 
-static inline u32 media_entity_type(struct media_entity *entity)
+/**
+ * struct media_interface - A media interface graph object.
+ *
+ * @graph_obj:		embedded graph object
+ * @links:		List of links pointing to graph entities
+ * @type:		Type of the interface as defined in the
+ *			uapi/media/media.h header, e. g.
+ *			MEDIA_INTF_T_*
+ * @flags:		Interface flags as defined in uapi/media/media.h
+ */
+struct media_interface {
+	struct media_gobj		graph_obj;
+	struct list_head		links;
+	u32				type;
+	u32				flags;
+};
+
+/**
+ * struct media_intf_devnode - A media interface via a device node.
+ *
+ * @intf:	embedded interface object
+ * @major:	Major number of a device node
+ * @minor:	Minor number of a device node
+ */
+struct media_intf_devnode {
+	struct media_interface		intf;
+
+	/* Should match the fields at media_v2_intf_devnode */
+	u32				major;
+	u32				minor;
+};
+
+/**
+ * media_entity_id() - return the media entity graph object id
+ *
+ * @entity:	pointer to entity
+ */
+static inline u32 media_entity_id(struct media_entity *entity)
 {
-	return entity->type & MEDIA_ENT_TYPE_MASK;
+	return entity->graph_obj.id;
 }
 
-static inline u32 media_entity_subtype(struct media_entity *entity)
+/**
+ * media_type() - return the media object type
+ *
+ * @gobj:	pointer to the media graph object
+ */
+static inline enum media_gobj_type media_type(struct media_gobj *gobj)
 {
-	return entity->type & MEDIA_ENT_SUBTYPE_MASK;
+	return gobj->id >> MEDIA_BITS_PER_ID;
 }
 
-#define MEDIA_ENTITY_ENUM_MAX_DEPTH	16
-#define MEDIA_ENTITY_ENUM_MAX_ID	64
+/**
+ * media_id() - return the media object ID
+ *
+ * @gobj:	pointer to the media graph object
+ */
+static inline u32 media_id(struct media_gobj *gobj)
+{
+	return gobj->id & MEDIA_ID_MASK;
+}
 
-struct media_entity_graph {
-	struct {
-		struct media_entity *entity;
-		int link;
-	} stack[MEDIA_ENTITY_ENUM_MAX_DEPTH];
+/**
+ * media_gobj_gen_id() - encapsulates type and ID on at the object ID
+ *
+ * @type:	object type as define at enum &media_gobj_type.
+ * @local_id:	next ID, from struct &media_device.@id.
+ */
+static inline u32 media_gobj_gen_id(enum media_gobj_type type, u64 local_id)
+{
+	u32 id;
 
-	DECLARE_BITMAP(entities, MEDIA_ENTITY_ENUM_MAX_ID);
-	int top;
-};
+	id = type << MEDIA_BITS_PER_ID;
+	id |= local_id & MEDIA_ID_MASK;
+
+	return id;
+}
+
+/**
+ * is_media_entity_v4l2_io() - identify if the entity main function
+ *			       is a V4L2 I/O
+ *
+ * @entity:	pointer to entity
+ *
+ * Return: true if the entity main function is one of the V4L2 I/O types
+ *	(video, VBI or SDR radio); false otherwise.
+ */
+static inline bool is_media_entity_v4l2_io(struct media_entity *entity)
+{
+	if (!entity)
+		return false;
+
+	switch (entity->function) {
+	case MEDIA_ENT_F_IO_V4L:
+	case MEDIA_ENT_F_IO_VBI:
+	case MEDIA_ENT_F_IO_SWRADIO:
+		return true;
+	default:
+		return false;
+	}
+}
+
+/**
+ * is_media_entity_v4l2_subdev - return true if the entity main function is
+ *				 associated with the V4L2 API subdev usage
+ *
+ * @entity:	pointer to entity
+ *
+ * This is an ancillary function used by subdev-based V4L2 drivers.
+ * It checks if the entity function is one of functions used by a V4L2 subdev,
+ * e. g. camera-relatef functions, analog TV decoder, TV tuner, V4L2 DSPs.
+ */
+static inline bool is_media_entity_v4l2_subdev(struct media_entity *entity)
+{
+	if (!entity)
+		return false;
+
+	switch (entity->function) {
+	case MEDIA_ENT_F_V4L2_SUBDEV_UNKNOWN:
+	case MEDIA_ENT_F_CAM_SENSOR:
+	case MEDIA_ENT_F_FLASH:
+	case MEDIA_ENT_F_LENS:
+	case MEDIA_ENT_F_ATV_DECODER:
+	case MEDIA_ENT_F_TUNER:
+		return true;
+
+	default:
+		return false;
+	}
+}
+
+/**
+ * __media_entity_enum_init - Initialise an entity enumeration
+ *
+ * @ent_enum: Entity enumeration to be initialised
+ * @idx_max: Maximum number of entities in the enumeration
+ *
+ * Return: Returns zero on success or a negative error code.
+ */
+__must_check int __media_entity_enum_init(struct media_entity_enum *ent_enum,
+					  int idx_max);
+
+/**
+ * media_entity_enum_cleanup - Release resources of an entity enumeration
+ *
+ * @ent_enum: Entity enumeration to be released
+ */
+void media_entity_enum_cleanup(struct media_entity_enum *ent_enum);
+
+/**
+ * media_entity_enum_zero - Clear the entire enum
+ *
+ * @ent_enum: Entity enumeration to be cleared
+ */
+static inline void media_entity_enum_zero(struct media_entity_enum *ent_enum)
+{
+	bitmap_zero(ent_enum->bmap, ent_enum->idx_max);
+}
+
+/**
+ * media_entity_enum_set - Mark a single entity in the enum
+ *
+ * @ent_enum: Entity enumeration
+ * @entity: Entity to be marked
+ */
+static inline void media_entity_enum_set(struct media_entity_enum *ent_enum,
+					 struct media_entity *entity)
+{
+	if (WARN_ON(entity->internal_idx >= ent_enum->idx_max))
+		return;
+
+	__set_bit(entity->internal_idx, ent_enum->bmap);
+}
+
+/**
+ * media_entity_enum_clear - Unmark a single entity in the enum
+ *
+ * @ent_enum: Entity enumeration
+ * @entity: Entity to be unmarked
+ */
+static inline void media_entity_enum_clear(struct media_entity_enum *ent_enum,
+					   struct media_entity *entity)
+{
+	if (WARN_ON(entity->internal_idx >= ent_enum->idx_max))
+		return;
+
+	__clear_bit(entity->internal_idx, ent_enum->bmap);
+}
+
+/**
+ * media_entity_enum_test - Test whether the entity is marked
+ *
+ * @ent_enum: Entity enumeration
+ * @entity: Entity to be tested
+ *
+ * Returns true if the entity was marked.
+ */
+static inline bool media_entity_enum_test(struct media_entity_enum *ent_enum,
+					  struct media_entity *entity)
+{
+	if (WARN_ON(entity->internal_idx >= ent_enum->idx_max))
+		return true;
+
+	return test_bit(entity->internal_idx, ent_enum->bmap);
+}
+
+/**
+ * media_entity_enum_test - Test whether the entity is marked, and mark it
+ *
+ * @ent_enum: Entity enumeration
+ * @entity: Entity to be tested
+ *
+ * Returns true if the entity was marked, and mark it before doing so.
+ */
+static inline bool
+media_entity_enum_test_and_set(struct media_entity_enum *ent_enum,
+			       struct media_entity *entity)
+{
+	if (WARN_ON(entity->internal_idx >= ent_enum->idx_max))
+		return true;
+
+	return __test_and_set_bit(entity->internal_idx, ent_enum->bmap);
+}
+
+/**
+ * media_entity_enum_empty - Test whether the entire enum is empty
+ *
+ * @ent_enum: Entity enumeration
+ *
+ * Returns true if the entity was marked.
+ */
+static inline bool media_entity_enum_empty(struct media_entity_enum *ent_enum)
+{
+	return bitmap_empty(ent_enum->bmap, ent_enum->idx_max);
+}
+
+/**
+ * media_entity_enum_intersects - Test whether two enums intersect
+ *
+ * @ent_enum1: First entity enumeration
+ * @ent_enum2: Second entity enumeration
+ *
+ * Returns true if entity enumerations e and f intersect, otherwise false.
+ */
+static inline bool media_entity_enum_intersects(
+	struct media_entity_enum *ent_enum1,
+	struct media_entity_enum *ent_enum2)
+{
+	WARN_ON(ent_enum1->idx_max != ent_enum2->idx_max);
+
+	return bitmap_intersects(ent_enum1->bmap, ent_enum2->bmap,
+				 min(ent_enum1->idx_max, ent_enum2->idx_max));
+}
+
+#define gobj_to_entity(gobj) \
+		container_of(gobj, struct media_entity, graph_obj)
+
+#define gobj_to_pad(gobj) \
+		container_of(gobj, struct media_pad, graph_obj)
+
+#define gobj_to_link(gobj) \
+		container_of(gobj, struct media_link, graph_obj)
+
+#define gobj_to_link(gobj) \
+		container_of(gobj, struct media_link, graph_obj)
+
+#define gobj_to_pad(gobj) \
+		container_of(gobj, struct media_pad, graph_obj)
+
+#define gobj_to_intf(gobj) \
+		container_of(gobj, struct media_interface, graph_obj)
+
+#define intf_to_devnode(intf) \
+		container_of(intf, struct media_intf_devnode, intf)
+
+/**
+ *  media_gobj_create - Initialize a graph object
+ *
+ * @mdev:	Pointer to the media_device that contains the object
+ * @type:	Type of the object
+ * @gobj:	Pointer to the graph object
+ *
+ * This routine initializes the embedded struct media_gobj inside a
+ * media graph object. It is called automatically if media_*_create()
+ * calls are used. However, if the object (entity, link, pad, interface)
+ * is embedded on some other object, this function should be called before
+ * registering the object at the media controller.
+ */
+void media_gobj_create(struct media_device *mdev,
+		    enum media_gobj_type type,
+		    struct media_gobj *gobj);
+
+/**
+ *  media_gobj_destroy - Stop using a graph object on a media device
+ *
+ * @gobj:	Pointer to the graph object
+ *
+ * This should be called by all routines like media_device_unregister()
+ * that remove/destroy media graph objects.
+ */
+void media_gobj_destroy(struct media_gobj *gobj);
+
+/**
+ * media_entity_pads_init() - Initialize the entity pads
+ *
+ * @entity:	entity where the pads belong
+ * @num_pads:	total number of sink and source pads
+ * @pads:	Array of @num_pads pads.
+ *
+ * The pads array is managed by the entity driver and passed to
+ * media_entity_pads_init() where its pointer will be stored in the entity
+ * structure.
+ *
+ * If no pads are needed, drivers could either directly fill
+ * &media_entity->@num_pads with 0 and &media_entity->@pads with NULL or call
+ * this function that will do the same.
+ *
+ * As the number of pads is known in advance, the pads array is not allocated
+ * dynamically but is managed by the entity driver. Most drivers will embed the
+ * pads array in a driver-specific structure, avoiding dynamic allocation.
+ *
+ * Drivers must set the direction of every pad in the pads array before calling
+ * media_entity_pads_init(). The function will initialize the other pads fields.
+ */
+int media_entity_pads_init(struct media_entity *entity, u16 num_pads,
+		      struct media_pad *pads);
 
-int media_entity_init(struct media_entity *entity, u16 num_pads,
-		struct media_pad *pads, u16 extra_links);
-void media_entity_cleanup(struct media_entity *entity);
+/**
+ * media_entity_cleanup() - free resources associated with an entity
+ *
+ * @entity:	entity where the pads belong
+ *
+ * This function must be called during the cleanup phase after unregistering
+ * the entity (currently, it does nothing).
+ */
+static inline void media_entity_cleanup(struct media_entity *entity) {};
+
+/**
+ * media_create_pad_link() - creates a link between two entities.
+ *
+ * @source:	pointer to &media_entity of the source pad.
+ * @source_pad:	number of the source pad in the pads array
+ * @sink:	pointer to &media_entity of the sink pad.
+ * @sink_pad:	number of the sink pad in the pads array.
+ * @flags:	Link flags, as defined in include/uapi/linux/media.h.
+ *
+ * Valid values for flags:
+ * A %MEDIA_LNK_FL_ENABLED flag indicates that the link is enabled and can be
+ *	used to transfer media data. When two or more links target a sink pad,
+ *	only one of them can be enabled at a time.
+ *
+ * A %MEDIA_LNK_FL_IMMUTABLE flag indicates that the link enabled state can't
+ *	be modified at runtime. If %MEDIA_LNK_FL_IMMUTABLE is set, then
+ *	%MEDIA_LNK_FL_ENABLED must also be set since an immutable link is
+ *	always enabled.
+ *
+ * NOTE:
+ *
+ * Before calling this function, media_entity_pads_init() and
+ * media_device_register_entity() should be called previously for both ends.
+ */
+__must_check int media_create_pad_link(struct media_entity *source,
+			u16 source_pad, struct media_entity *sink,
+			u16 sink_pad, u32 flags);
+
+/**
+ * media_create_pad_links() - creates a link between two entities.
+ *
+ * @mdev: Pointer to the media_device that contains the object
+ * @source_function: Function of the source entities. Used only if @source is
+ *	NULL.
+ * @source: pointer to &media_entity of the source pad. If NULL, it will use
+ * 	all entities that matches the @sink_function.
+ * @source_pad: number of the source pad in the pads array
+ * @sink_function: Function of the sink entities. Used only if @sink is NULL.
+ * @sink: pointer to &media_entity of the sink pad. If NULL, it will use
+ * 	all entities that matches the @sink_function.
+ * @sink_pad: number of the sink pad in the pads array.
+ * @flags: Link flags, as defined in include/uapi/linux/media.h.
+ * @allow_both_undefined: if true, then both @source and @sink can be NULL.
+ *	In such case, it will create a crossbar between all entities that
+ *	matches @source_function to all entities that matches @sink_function.
+ *	If false, it will return 0 and won't create any link if both @source
+ *	and @sink are NULL.
+ *
+ * Valid values for flags:
+ * A %MEDIA_LNK_FL_ENABLED flag indicates that the link is enabled and can be
+ *	used to transfer media data. If multiple links are created and this
+ *	flag is passed as an argument, only the first created link will have
+ *	this flag.
+ *
+ * A %MEDIA_LNK_FL_IMMUTABLE flag indicates that the link enabled state can't
+ *	be modified at runtime. If %MEDIA_LNK_FL_IMMUTABLE is set, then
+ *	%MEDIA_LNK_FL_ENABLED must also be set since an immutable link is
+ *	always enabled.
+ *
+ * It is common for some devices to have multiple source and/or sink entities
+ * of the same type that should be linked. While media_create_pad_link()
+ * creates link by link, this function is meant to allow 1:n, n:1 and even
+ * cross-bar (n:n) links.
+ *
+ * NOTE: Before calling this function, media_entity_pads_init() and
+ * media_device_register_entity() should be called previously for the entities
+ * to be linked.
+ */
+int media_create_pad_links(const struct media_device *mdev,
+			   const u32 source_function,
+			   struct media_entity *source,
+			   const u16 source_pad,
+			   const u32 sink_function,
+			   struct media_entity *sink,
+			   const u16 sink_pad,
+			   u32 flags,
+			   const bool allow_both_undefined);
 
-int media_entity_create_link(struct media_entity *source, u16 source_pad,
-		struct media_entity *sink, u16 sink_pad, u32 flags);
 void __media_entity_remove_links(struct media_entity *entity);
+
+/**
+ * media_entity_remove_links() - remove all links associated with an entity
+ *
+ * @entity:	pointer to &media_entity
+ *
+ * Note: this is called automatically when an entity is unregistered via
+ * media_device_register_entity().
+ */
 void media_entity_remove_links(struct media_entity *entity);
 
+/**
+ * __media_entity_setup_link - Configure a media link without locking
+ * @link: The link being configured
+ * @flags: Link configuration flags
+ *
+ * The bulk of link setup is handled by the two entities connected through the
+ * link. This function notifies both entities of the link configuration change.
+ *
+ * If the link is immutable or if the current and new configuration are
+ * identical, return immediately.
+ *
+ * The user is expected to hold link->source->parent->mutex. If not,
+ * media_entity_setup_link() should be used instead.
+ */
 int __media_entity_setup_link(struct media_link *link, u32 flags);
+
+/**
+ * media_entity_setup_link() - changes the link flags properties in runtime
+ *
+ * @link:	pointer to &media_link
+ * @flags:	the requested new link flags
+ *
+ * The only configurable property is the %MEDIA_LNK_FL_ENABLED link flag
+ * flag to enable/disable a link. Links marked with the
+ * %MEDIA_LNK_FL_IMMUTABLE link flag can not be enabled or disabled.
+ *
+ * When a link is enabled or disabled, the media framework calls the
+ * link_setup operation for the two entities at the source and sink of the
+ * link, in that order. If the second link_setup call fails, another
+ * link_setup call is made on the first entity to restore the original link
+ * flags.
+ *
+ * Media device drivers can be notified of link setup operations by setting the
+ * media_device::link_notify pointer to a callback function. If provided, the
+ * notification callback will be called before enabling and after disabling
+ * links.
+ *
+ * Entity drivers must implement the link_setup operation if any of their links
+ * is non-immutable. The operation must either configure the hardware or store
+ * the configuration information to be applied later.
+ *
+ * Link configuration must not have any side effect on other links. If an
+ * enabled link at a sink pad prevents another link at the same pad from
+ * being enabled, the link_setup operation must return -EBUSY and can't
+ * implicitly disable the first enabled link.
+ *
+ * NOTE: the valid values of the flags for the link is the same as described
+ * on media_create_pad_link(), for pad to pad links or the same as described
+ * on media_create_intf_link(), for interface to entity links.
+ */
 int media_entity_setup_link(struct media_link *link, u32 flags);
+
+/**
+ * media_entity_find_link - Find a link between two pads
+ * @source: Source pad
+ * @sink: Sink pad
+ *
+ * Return a pointer to the link between the two entities. If no such link
+ * exists, return NULL.
+ */
 struct media_link *media_entity_find_link(struct media_pad *source,
 		struct media_pad *sink);
+
+/**
+ * media_entity_remote_pad - Find the pad at the remote end of a link
+ * @pad: Pad at the local end of the link
+ *
+ * Search for a remote pad connected to the given pad by iterating over all
+ * links originating or terminating at that pad until an enabled link is found.
+ *
+ * Return a pointer to the pad at the remote end of the first found enabled
+ * link, or NULL if no enabled link has been found.
+ */
 struct media_pad *media_entity_remote_pad(struct media_pad *pad);
 
+/**
+ * media_entity_get - Get a reference to the parent module
+ *
+ * @entity: The entity
+ *
+ * Get a reference to the parent media device module.
+ *
+ * The function will return immediately if @entity is NULL.
+ *
+ * Return a pointer to the entity on success or NULL on failure.
+ */
 struct media_entity *media_entity_get(struct media_entity *entity);
+
+__must_check int media_entity_graph_walk_init(
+	struct media_entity_graph *graph, struct media_device *mdev);
+
+/**
+ * media_entity_graph_walk_cleanup - Release resources used by graph walk.
+ *
+ * @graph: Media graph structure that will be used to walk the graph
+ */
+void media_entity_graph_walk_cleanup(struct media_entity_graph *graph);
+
+/**
+ * media_entity_put - Release the reference to the parent module
+ *
+ * @entity: The entity
+ *
+ * Release the reference count acquired by media_entity_get().
+ *
+ * The function will return immediately if @entity is NULL.
+ */
 void media_entity_put(struct media_entity *entity);
 
+/**
+ * media_entity_graph_walk_start - Start walking the media graph at a given entity
+ * @graph: Media graph structure that will be used to walk the graph
+ * @entity: Starting entity
+ *
+ * Before using this function, media_entity_graph_walk_init() must be
+ * used to allocate resources used for walking the graph. This
+ * function initializes the graph traversal structure to walk the
+ * entities graph starting at the given entity. The traversal
+ * structure must not be modified by the caller during graph
+ * traversal. After the graph walk, the resources must be released
+ * using media_entity_graph_walk_cleanup().
+ */
 void media_entity_graph_walk_start(struct media_entity_graph *graph,
-		struct media_entity *entity);
+				   struct media_entity *entity);
+
+/**
+ * media_entity_graph_walk_next - Get the next entity in the graph
+ * @graph: Media graph structure
+ *
+ * Perform a depth-first traversal of the given media entities graph.
+ *
+ * The graph structure must have been previously initialized with a call to
+ * media_entity_graph_walk_start().
+ *
+ * Return the next entity in the graph or NULL if the whole graph have been
+ * traversed.
+ */
 struct media_entity *
 media_entity_graph_walk_next(struct media_entity_graph *graph);
+
+/**
+ * media_entity_pipeline_start - Mark a pipeline as streaming
+ * @entity: Starting entity
+ * @pipe: Media pipeline to be assigned to all entities in the pipeline.
+ *
+ * Mark all entities connected to a given entity through enabled links, either
+ * directly or indirectly, as streaming. The given pipeline object is assigned to
+ * every entity in the pipeline and stored in the media_entity pipe field.
+ *
+ * Calls to this function can be nested, in which case the same number of
+ * media_entity_pipeline_stop() calls will be required to stop streaming. The
+ * pipeline pointer must be identical for all nested calls to
+ * media_entity_pipeline_start().
+ */
 __must_check int media_entity_pipeline_start(struct media_entity *entity,
 					     struct media_pipeline *pipe);
+
+/**
+ * media_entity_pipeline_stop - Mark a pipeline as not streaming
+ * @entity: Starting entity
+ *
+ * Mark all entities connected to a given entity through enabled links, either
+ * directly or indirectly, as not streaming. The media_entity pipe field is
+ * reset to NULL.
+ *
+ * If multiple calls to media_entity_pipeline_start() have been made, the same
+ * number of calls to this function are required to mark the pipeline as not
+ * streaming.
+ */
 void media_entity_pipeline_stop(struct media_entity *entity);
 
+/**
+ * media_devnode_create() - creates and initializes a device node interface
+ *
+ * @mdev:	pointer to struct &media_device
+ * @type:	type of the interface, as given by MEDIA_INTF_T_* macros
+ *		as defined in the uapi/media/media.h header.
+ * @flags:	Interface flags as defined in uapi/media/media.h.
+ * @major:	Device node major number.
+ * @minor:	Device node minor number.
+ *
+ * Return: if succeeded, returns a pointer to the newly allocated
+ *	&media_intf_devnode pointer.
+ */
+struct media_intf_devnode *
+__must_check media_devnode_create(struct media_device *mdev,
+				  u32 type, u32 flags,
+				  u32 major, u32 minor);
+/**
+ * media_devnode_remove() - removes a device node interface
+ *
+ * @devnode:	pointer to &media_intf_devnode to be freed.
+ *
+ * When a device node interface is removed, all links to it are automatically
+ * removed.
+ */
+void media_devnode_remove(struct media_intf_devnode *devnode);
+struct media_link *
+
+/**
+ * media_create_intf_link() - creates a link between an entity and an interface
+ *
+ * @entity:	pointer to %media_entity
+ * @intf:	pointer to %media_interface
+ * @flags:	Link flags, as defined in include/uapi/linux/media.h.
+ *
+ *
+ * Valid values for flags:
+ * The %MEDIA_LNK_FL_ENABLED flag indicates that the interface is connected to
+ *	the entity hardware. That's the default value for interfaces. An
+ *	interface may be disabled if the hardware is busy due to the usage
+ *	of some other interface that it is currently controlling the hardware.
+ *	A typical example is an hybrid TV device that handle only one type of
+ *	stream on a given time. So, when the digital TV is streaming,
+ *	the V4L2 interfaces won't be enabled, as such device is not able to
+ *	also stream analog TV or radio.
+ *
+ * Note:
+ *
+ * Before calling this function, media_devnode_create() should be called for
+ * the interface and media_device_register_entity() should be called for the
+ * interface that will be part of the link.
+ */
+__must_check media_create_intf_link(struct media_entity *entity,
+				    struct media_interface *intf,
+				    u32 flags);
+/**
+ * __media_remove_intf_link() - remove a single interface link
+ *
+ * @link:	pointer to &media_link.
+ *
+ * Note: this is an unlocked version of media_remove_intf_link()
+ */
+void __media_remove_intf_link(struct media_link *link);
+
+/**
+ * media_remove_intf_link() - remove a single interface link
+ *
+ * @link:	pointer to &media_link.
+ *
+ * Note: prefer to use this one, instead of __media_remove_intf_link()
+ */
+void media_remove_intf_link(struct media_link *link);
+
+/**
+ * __media_remove_intf_links() - remove all links associated with an interface
+ *
+ * @intf:	pointer to &media_interface
+ *
+ * Note: this is an unlocked version of media_remove_intf_links().
+ */
+void __media_remove_intf_links(struct media_interface *intf);
+
+/**
+ * media_remove_intf_links() - remove all links associated with an interface
+ *
+ * @intf:	pointer to &media_interface
+ *
+ * Notes:
+ *
+ * this is called automatically when an entity is unregistered via
+ * media_device_register_entity() and by media_devnode_remove().
+ *
+ * Prefer to use this one, instead of __media_remove_intf_links().
+ */
+void media_remove_intf_links(struct media_interface *intf);
+
 #define media_entity_call(entity, operation, args...)			\
 	(((entity)->ops && (entity)->ops->operation) ?			\
 	 (entity)->ops->operation((entity) , ##args) : -ENOIOCTLCMD)
diff --git a/include/media/mmp-camera.h b/include/media/mmp-camera.h
deleted file mode 100644
index 7611963a257f..000000000000
--- a/include/media/mmp-camera.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * Information for the Marvell Armada MMP camera
- */
-
-struct mmp_camera_platform_data {
-	struct platform_device *i2c_device;
-	int sensor_power_gpio;
-	int sensor_reset_gpio;
-};
diff --git a/include/media/omap1_camera.h b/include/media/omap1_camera.h
deleted file mode 100644
index 819767cf04d4..000000000000
--- a/include/media/omap1_camera.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * Header for V4L2 SoC Camera driver for OMAP1 Camera Interface
- *
- * Copyright (C) 2010, Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __MEDIA_OMAP1_CAMERA_H_
-#define __MEDIA_OMAP1_CAMERA_H_
-
-#include <linux/bitops.h>
-
-#define OMAP1_CAMERA_IOSIZE		0x1c
-
-enum omap1_cam_vb_mode {
-	OMAP1_CAM_DMA_CONTIG = 0,
-	OMAP1_CAM_DMA_SG,
-};
-
-#define OMAP1_CAMERA_MIN_BUF_COUNT(x)	((x) == OMAP1_CAM_DMA_CONTIG ? 3 : 2)
-
-struct omap1_cam_platform_data {
-	unsigned long	camexclk_khz;
-	unsigned long	lclk_khz_max;
-	unsigned long	flags;
-};
-
-#define OMAP1_CAMERA_LCLK_RISING	BIT(0)
-#define OMAP1_CAMERA_RST_LOW		BIT(1)
-#define OMAP1_CAMERA_RST_HIGH		BIT(2)
-
-#endif /* __MEDIA_OMAP1_CAMERA_H_ */
diff --git a/include/media/omap4iss.h b/include/media/omap4iss.h
deleted file mode 100644
index 0d7620db5e32..000000000000
--- a/include/media/omap4iss.h
+++ /dev/null
@@ -1,65 +0,0 @@
-#ifndef ARCH_ARM_PLAT_OMAP4_ISS_H
-#define ARCH_ARM_PLAT_OMAP4_ISS_H
-
-#include <linux/i2c.h>
-
-struct iss_device;
-
-enum iss_interface_type {
-	ISS_INTERFACE_CSI2A_PHY1,
-	ISS_INTERFACE_CSI2B_PHY2,
-};
-
-/**
- * struct iss_csiphy_lane: CSI2 lane position and polarity
- * @pos: position of the lane
- * @pol: polarity of the lane
- */
-struct iss_csiphy_lane {
-	u8 pos;
-	u8 pol;
-};
-
-#define ISS_CSIPHY1_NUM_DATA_LANES	4
-#define ISS_CSIPHY2_NUM_DATA_LANES	1
-
-/**
- * struct iss_csiphy_lanes_cfg - CSI2 lane configuration
- * @data: Configuration of one or two data lanes
- * @clk: Clock lane configuration
- */
-struct iss_csiphy_lanes_cfg {
-	struct iss_csiphy_lane data[ISS_CSIPHY1_NUM_DATA_LANES];
-	struct iss_csiphy_lane clk;
-};
-
-/**
- * struct iss_csi2_platform_data - CSI2 interface platform data
- * @crc: Enable the cyclic redundancy check
- * @vpclk_div: Video port output clock control
- */
-struct iss_csi2_platform_data {
-	unsigned crc:1;
-	unsigned vpclk_div:2;
-	struct iss_csiphy_lanes_cfg lanecfg;
-};
-
-struct iss_subdev_i2c_board_info {
-	struct i2c_board_info *board_info;
-	int i2c_adapter_id;
-};
-
-struct iss_v4l2_subdevs_group {
-	struct iss_subdev_i2c_board_info *subdevs;
-	enum iss_interface_type interface;
-	union {
-		struct iss_csi2_platform_data csi2;
-	} bus; /* gcc < 4.6.0 chokes on anonymous union initializers */
-};
-
-struct iss_platform_data {
-	struct iss_v4l2_subdevs_group *subdevs;
-	void (*set_constraints)(struct iss_device *iss, bool enable);
-};
-
-#endif
diff --git a/include/media/rc-core.h b/include/media/rc-core.h
index ec921f6538c7..f6494709e230 100644
--- a/include/media/rc-core.h
+++ b/include/media/rc-core.h
@@ -239,6 +239,7 @@ static inline void init_ir_raw_event(struct ir_raw_event *ev)
 	memset(ev, 0, sizeof(*ev));
 }
 
+#define IR_DEFAULT_TIMEOUT	MS_TO_NS(125)
 #define IR_MAX_DURATION         500000000	/* 500 ms */
 #define US_TO_NS(usec)		((usec) * 1000)
 #define MS_TO_US(msec)		((msec) * 1000)
diff --git a/include/media/rc-map.h b/include/media/rc-map.h
index 7c4bbc4dfab4..7844e9879497 100644
--- a/include/media/rc-map.h
+++ b/include/media/rc-map.h
@@ -33,26 +33,26 @@ enum rc_type {
 	RC_TYPE_XMP		= 18,	/* XMP protocol */
 };
 
-#define RC_BIT_NONE		0
-#define RC_BIT_UNKNOWN		(1 << RC_TYPE_UNKNOWN)
-#define RC_BIT_OTHER		(1 << RC_TYPE_OTHER)
-#define RC_BIT_RC5		(1 << RC_TYPE_RC5)
-#define RC_BIT_RC5X		(1 << RC_TYPE_RC5X)
-#define RC_BIT_RC5_SZ		(1 << RC_TYPE_RC5_SZ)
-#define RC_BIT_JVC		(1 << RC_TYPE_JVC)
-#define RC_BIT_SONY12		(1 << RC_TYPE_SONY12)
-#define RC_BIT_SONY15		(1 << RC_TYPE_SONY15)
-#define RC_BIT_SONY20		(1 << RC_TYPE_SONY20)
-#define RC_BIT_NEC		(1 << RC_TYPE_NEC)
-#define RC_BIT_SANYO		(1 << RC_TYPE_SANYO)
-#define RC_BIT_MCE_KBD		(1 << RC_TYPE_MCE_KBD)
-#define RC_BIT_RC6_0		(1 << RC_TYPE_RC6_0)
-#define RC_BIT_RC6_6A_20	(1 << RC_TYPE_RC6_6A_20)
-#define RC_BIT_RC6_6A_24	(1 << RC_TYPE_RC6_6A_24)
-#define RC_BIT_RC6_6A_32	(1 << RC_TYPE_RC6_6A_32)
-#define RC_BIT_RC6_MCE		(1 << RC_TYPE_RC6_MCE)
-#define RC_BIT_SHARP		(1 << RC_TYPE_SHARP)
-#define RC_BIT_XMP		(1 << RC_TYPE_XMP)
+#define RC_BIT_NONE		0ULL
+#define RC_BIT_UNKNOWN		(1ULL << RC_TYPE_UNKNOWN)
+#define RC_BIT_OTHER		(1ULL << RC_TYPE_OTHER)
+#define RC_BIT_RC5		(1ULL << RC_TYPE_RC5)
+#define RC_BIT_RC5X		(1ULL << RC_TYPE_RC5X)
+#define RC_BIT_RC5_SZ		(1ULL << RC_TYPE_RC5_SZ)
+#define RC_BIT_JVC		(1ULL << RC_TYPE_JVC)
+#define RC_BIT_SONY12		(1ULL << RC_TYPE_SONY12)
+#define RC_BIT_SONY15		(1ULL << RC_TYPE_SONY15)
+#define RC_BIT_SONY20		(1ULL << RC_TYPE_SONY20)
+#define RC_BIT_NEC		(1ULL << RC_TYPE_NEC)
+#define RC_BIT_SANYO		(1ULL << RC_TYPE_SANYO)
+#define RC_BIT_MCE_KBD		(1ULL << RC_TYPE_MCE_KBD)
+#define RC_BIT_RC6_0		(1ULL << RC_TYPE_RC6_0)
+#define RC_BIT_RC6_6A_20	(1ULL << RC_TYPE_RC6_6A_20)
+#define RC_BIT_RC6_6A_24	(1ULL << RC_TYPE_RC6_6A_24)
+#define RC_BIT_RC6_6A_32	(1ULL << RC_TYPE_RC6_6A_32)
+#define RC_BIT_RC6_MCE		(1ULL << RC_TYPE_RC6_MCE)
+#define RC_BIT_SHARP		(1ULL << RC_TYPE_SHARP)
+#define RC_BIT_XMP		(1ULL << RC_TYPE_XMP)
 
 #define RC_BIT_ALL	(RC_BIT_UNKNOWN | RC_BIT_OTHER | \
 			 RC_BIT_RC5 | RC_BIT_RC5X | RC_BIT_RC5_SZ | \
diff --git a/include/media/s5p_hdmi.h b/include/media/s5p_hdmi.h
deleted file mode 100644
index 181642b8d0a5..000000000000
--- a/include/media/s5p_hdmi.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * Driver header for S5P HDMI chip.
- *
- * Copyright (c) 2011 Samsung Electronics, Co. Ltd
- * Contact: Tomasz Stanislawski <t.stanislaws@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef S5P_HDMI_H
-#define S5P_HDMI_H
-
-struct i2c_board_info;
-
-/**
- * @hdmiphy_bus: controller id for HDMIPHY bus
- * @hdmiphy_info: template for HDMIPHY I2C device
- * @mhl_bus: controller id for MHL control bus
- * @mhl_info: template for MHL I2C device
- * @hpd_gpio: GPIO for Hot-Plug-Detect pin
- *
- * NULL pointer for *_info fields indicates that
- * the corresponding chip is not present
- */
-struct s5p_hdmi_platform_data {
-	int hdmiphy_bus;
-	struct i2c_board_info *hdmiphy_info;
-	int mhl_bus;
-	struct i2c_board_info *mhl_info;
-	int hpd_gpio;
-};
-
-#endif /* S5P_HDMI_H */
-
diff --git a/include/media/si4713.h b/include/media/si4713.h
deleted file mode 100644
index be4f58e2440b..000000000000
--- a/include/media/si4713.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * include/media/si4713.h
- *
- * Board related data definitions for Si4713 i2c device driver.
- *
- * Copyright (c) 2009 Nokia Corporation
- * Contact: Eduardo Valentin <eduardo.valentin@nokia.com>
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- *
- */
-
-#ifndef SI4713_H
-#define SI4713_H
-
-/* The SI4713 I2C sensor chip has a fixed slave address of 0xc6 or 0x22. */
-#define SI4713_I2C_ADDR_BUSEN_HIGH	0x63
-#define SI4713_I2C_ADDR_BUSEN_LOW	0x11
-
-/*
- * Platform dependent definition
- */
-struct si4713_platform_data {
-	bool is_platform_device;
-};
-
-/*
- * Structure to query for Received Noise Level (RNL).
- */
-struct si4713_rnl {
-	__u32 index;		/* modulator index */
-	__u32 frequency;	/* frequency to peform rnl measurement */
-	__s32 rnl;		/* result of measurement in dBuV */
-	__u32 reserved[4];	/* drivers and apps must init this to 0 */
-};
-
-/*
- * This is the ioctl number to query for rnl. Users must pass a
- * struct si4713_rnl pointer specifying desired frequency in 'frequency' field
- * following driver capabilities (i.e V4L2_TUNER_CAP_LOW).
- * Driver must return measured value in the same struture, filling 'rnl' field.
- */
-#define SI4713_IOC_MEASURE_RNL	_IOWR('V', BASE_VIDIOC_PRIVATE + 0, \
-						struct si4713_rnl)
-
-#endif /* ifndef SI4713_H*/
diff --git a/include/media/sii9234.h b/include/media/sii9234.h
deleted file mode 100644
index 6a4a809fe9a3..000000000000
--- a/include/media/sii9234.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * Driver header for SII9234 MHL converter chip.
- *
- * Copyright (c) 2011 Samsung Electronics, Co. Ltd
- * Contact: Tomasz Stanislawski <t.stanislaws@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef SII9234_H
-#define SII9234_H
-
-/**
- * @gpio_n_reset: GPIO driving nRESET pin
- */
-
-struct sii9234_platform_data {
-	int gpio_n_reset;
-};
-
-#endif /* SII9234_H */
diff --git a/include/media/soc_camera.h b/include/media/soc_camera.h
index 2f6261f3e570..97aa13314bfd 100644
--- a/include/media/soc_camera.h
+++ b/include/media/soc_camera.h
@@ -18,7 +18,7 @@
 #include <linux/pm.h>
 #include <linux/videodev2.h>
 #include <media/videobuf-core.h>
-#include <media/videobuf2-core.h>
+#include <media/videobuf2-v4l2.h>
 #include <media/v4l2-async.h>
 #include <media/v4l2-ctrls.h>
 #include <media/v4l2-device.h>
diff --git a/include/media/soc_camera_platform.h b/include/media/soc_camera_platform.h
deleted file mode 100644
index 1e5065dab430..000000000000
--- a/include/media/soc_camera_platform.h
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- * Generic Platform Camera Driver Header
- *
- * Copyright (C) 2008 Magnus Damm
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __SOC_CAMERA_H__
-#define __SOC_CAMERA_H__
-
-#include <linux/videodev2.h>
-#include <media/soc_camera.h>
-#include <media/v4l2-mediabus.h>
-
-struct device;
-
-struct soc_camera_platform_info {
-	const char *format_name;
-	unsigned long format_depth;
-	struct v4l2_mbus_framefmt format;
-	unsigned long mbus_param;
-	enum v4l2_mbus_type mbus_type;
-	struct soc_camera_device *icd;
-	int (*set_capture)(struct soc_camera_platform_info *info, int enable);
-};
-
-static inline void soc_camera_platform_release(struct platform_device **pdev)
-{
-	*pdev = NULL;
-}
-
-static inline int soc_camera_platform_add(struct soc_camera_device *icd,
-					  struct platform_device **pdev,
-					  struct soc_camera_link *plink,
-					  void (*release)(struct device *dev),
-					  int id)
-{
-	struct soc_camera_subdev_desc *ssdd =
-		(struct soc_camera_subdev_desc *)plink;
-	struct soc_camera_platform_info *info = ssdd->drv_priv;
-	int ret;
-
-	if (&icd->sdesc->subdev_desc != ssdd)
-		return -ENODEV;
-
-	if (*pdev)
-		return -EBUSY;
-
-	*pdev = platform_device_alloc("soc_camera_platform", id);
-	if (!*pdev)
-		return -ENOMEM;
-
-	info->icd = icd;
-
-	(*pdev)->dev.platform_data = info;
-	(*pdev)->dev.release = release;
-
-	ret = platform_device_add(*pdev);
-	if (ret < 0) {
-		platform_device_put(*pdev);
-		*pdev = NULL;
-		info->icd = NULL;
-	}
-
-	return ret;
-}
-
-static inline void soc_camera_platform_del(const struct soc_camera_device *icd,
-					   struct platform_device *pdev,
-					   const struct soc_camera_link *plink)
-{
-	const struct soc_camera_subdev_desc *ssdd =
-		(const struct soc_camera_subdev_desc *)plink;
-	if (&icd->sdesc->subdev_desc != ssdd || !pdev)
-		return;
-
-	platform_device_unregister(pdev);
-}
-
-#endif /* __SOC_CAMERA_H__ */
diff --git a/include/media/timb_radio.h b/include/media/timb_radio.h
deleted file mode 100644
index a40a6a348d21..000000000000
--- a/include/media/timb_radio.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * timb_radio.h Platform struct for the Timberdale radio driver
- * Copyright (c) 2009 Intel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _TIMB_RADIO_
-#define _TIMB_RADIO_ 1
-
-#include <linux/i2c.h>
-
-struct timb_radio_platform_data {
-	int i2c_adapter; /* I2C adapter where the tuner and dsp are attached */
-	struct i2c_board_info *tuner;
-	struct i2c_board_info *dsp;
-};
-
-#endif
diff --git a/include/media/timb_video.h b/include/media/timb_video.h
deleted file mode 100644
index 70ae43970a49..000000000000
--- a/include/media/timb_video.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * timb_video.h Platform struct for the Timberdale video driver
- * Copyright (c) 2009-2010 Intel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _TIMB_VIDEO_
-#define _TIMB_VIDEO_ 1
-
-#include <linux/i2c.h>
-
-struct timb_video_platform_data {
-	int dma_channel;
-	int i2c_adapter; /* The I2C adapter where the encoder is attached */
-	struct {
-		const char *module_name;
-		struct i2c_board_info *info;
-	} encoder;
-};
-
-#endif
diff --git a/include/media/tuner-types.h b/include/media/tuner-types.h
index ab03c5344209..094e112cc325 100644
--- a/include/media/tuner-types.h
+++ b/include/media/tuner-types.h
@@ -5,6 +5,15 @@
 #ifndef __TUNER_TYPES_H__
 #define __TUNER_TYPES_H__
 
+/**
+ * enum param_type - type of the tuner pameters
+ *
+ * @TUNER_PARAM_TYPE_RADIO:	Tuner params are for FM and/or AM radio
+ * @TUNER_PARAM_TYPE_PAL:	Tuner params are for PAL color TV standard
+ * @TUNER_PARAM_TYPE_SECAM:	Tuner params are for SECAM color TV standard
+ * @TUNER_PARAM_TYPE_NTSC:	Tuner params are for NTSC color TV standard
+ * @TUNER_PARAM_TYPE_DIGITAL:	Tuner params are for digital TV
+ */
 enum param_type {
 	TUNER_PARAM_TYPE_RADIO,
 	TUNER_PARAM_TYPE_PAL,
@@ -13,97 +22,142 @@ enum param_type {
 	TUNER_PARAM_TYPE_DIGITAL,
 };
 
+/**
+ * struct tuner_range - define the frequencies supported by the tuner
+ *
+ * @limit:		Max frequency supported by that range, in 62.5 kHz
+ *			(TV) or 62.5 Hz (Radio), as defined by
+ *			V4L2_TUNER_CAP_LOW.
+ * @config:		Value of the band switch byte (BB) to setup this mode.
+ * @cb:			Value of the CB byte to setup this mode.
+ *
+ * Please notice that digital tuners like xc3028/xc4000/xc5000 don't use
+ * those ranges, as they're defined inside the driver. This is used by
+ * analog tuners that are compatible with the "Philips way" to setup the
+ * tuners. On those devices, the tuner set is done via 4 bytes:
+ *	divider byte1 (DB1), divider byte 2 (DB2), Control byte (CB) and
+ *	band switch byte (BB).
+ * Some tuners also have an additional optional Auxiliary byte (AB).
+ */
 struct tuner_range {
 	unsigned short limit;
 	unsigned char config;
 	unsigned char cb;
 };
 
+/**
+ * struct tuner_params - Parameters to be used to setup the tuner. Those
+ *			 are used by drivers/media/tuners/tuner-types.c in
+ *			 order to specify the tuner properties. Most of
+ *			 the parameters are for tuners based on tda9887 IF-PLL
+ *			 multi-standard analog TV/Radio demodulator, with is
+ *			 very common on legacy analog tuners.
+ *
+ * @type:			Type of the tuner parameters, as defined at
+ *				enum param_type. If the tuner supports multiple
+ *				standards, an array should be used, with one
+ *				row per different standard.
+ * @cb_first_if_lower_freq:	Many Philips-based tuners have a comment in
+ *				their datasheet like
+ *				"For channel selection involving band
+ *				switching, and to ensure smooth tuning to the
+ *				desired channel without causing unnecessary
+ *				charge pump action, it is recommended to
+ *				consider the difference between wanted channel
+ *				frequency and the current channel frequency.
+ *				Unnecessary charge pump action will result
+ *				in very low tuning voltage which may drive the
+ *				oscillator to extreme conditions".
+ *				Set cb_first_if_lower_freq to 1, if this check
+ *				is required for this tuner. I tested this for
+ *				PAL by first setting the TV frequency to
+ *				203 MHz and then switching to 96.6 MHz FM
+ *				radio. The result was static unless the
+ *				control byte was sent first.
+ * @has_tda9887:		Set to 1 if this tuner uses a tda9887
+ * @port1_fm_high_sensitivity:	Many Philips tuners use tda9887 PORT1 to select
+ *				the FM radio sensitivity. If this setting is 1,
+ *				then set PORT1 to 1 to get proper FM reception.
+ * @port2_fm_high_sensitivity:	Some Philips tuners use tda9887 PORT2 to select
+ *				the FM radio sensitivity. If this setting is 1,
+ *				then set PORT2 to 1 to get proper FM reception.
+ * @fm_gain_normal:		Some Philips tuners use tda9887 cGainNormal to
+ *				select the FM radio sensitivity. If this
+ *				setting is 1, e register will use cGainNormal
+ *				instead of cGainLow.
+ * @intercarrier_mode:		Most tuners with a tda9887 use QSS mode.
+ *				Some (cheaper) tuners use Intercarrier mode.
+ *				If this setting is 1, then the tuner needs to
+ *				be set to intercarrier mode.
+ * @port1_active:		This setting sets the default value for PORT1.
+ *				0 means inactive, 1 means active. Note: the
+ *				actual bit value written to the tda9887 is
+ *				inverted. So a 0 here means a 1 in the B6 bit.
+ * @port2_active:		This setting sets the default value for PORT2.
+ *				0 means inactive, 1 means active. Note: the
+ *				actual bit value written to the tda9887 is
+ *				inverted. So a 0 here means a 1 in the B7 bit.
+ * @port1_invert_for_secam_lc:	Sometimes PORT1 is inverted when the SECAM-L'
+ *				standard is selected. Set this bit to 1 if this
+ *				is needed.
+ * @port2_invert_for_secam_lc:	Sometimes PORT2 is inverted when the SECAM-L'
+ *				standard is selected. Set this bit to 1 if this
+ *				is needed.
+ * @port1_set_for_fm_mono:	Some cards require PORT1 to be 1 for mono Radio
+ *				FM and 0 for stereo.
+ * @default_pll_gating_18:	Select 18% (or according to datasheet 0%)
+ *				L standard PLL gating, vs the driver default
+ *				of 36%.
+ * @radio_if:			IF to use in radio mode.  Tuners with a
+ *				separate radio IF filter seem to use 10.7,
+ *				while those without use 33.3 for PAL/SECAM
+ *				tuners and 41.3 for NTSC tuners.
+ *				0 = 10.7, 1 = 33.3, 2 = 41.3
+ * @default_top_low:		Default tda9887 TOP value in dB for the low
+ *				band. Default is 0. Range: -16:+15
+ * @default_top_mid:		Default tda9887 TOP value in dB for the mid
+ *				band. Default is 0. Range: -16:+15
+ * @default_top_high:		Default tda9887 TOP value in dB for the high
+ *				band. Default is 0. Range: -16:+15
+ * @default_top_secam_low:	Default tda9887 TOP value in dB for SECAM-L/L'
+ *				for the low band. Default is 0. Several tuners
+ *				require a different TOP value for the
+ *				SECAM-L/L' standards. Range: -16:+15
+ * @default_top_secam_mid:	Default tda9887 TOP value in dB for SECAM-L/L'
+ *				for the mid band. Default is 0. Several tuners
+ *				require a different TOP value for the
+ *				SECAM-L/L' standards. Range: -16:+15
+ * @default_top_secam_high:	Default tda9887 TOP value in dB for SECAM-L/L'
+ *				for the high band. Default is 0. Several tuners
+ *				require a different TOP value for the
+ *				SECAM-L/L' standards. Range: -16:+15
+ * @iffreq:			Intermediate frequency (IF) used by the tuner
+ *				on digital mode.
+ * @count:			Size of the ranges array.
+ * @ranges:			Array with the frequency ranges supported by
+ *				the tuner.
+ */
 struct tuner_params {
 	enum param_type type;
 
-	/* Many Philips based tuners have a comment like this in their
-	 * datasheet:
-	 *
-	 *   For channel selection involving band switching, and to ensure
-	 *   smooth tuning to the desired channel without causing
-	 *   unnecessary charge pump action, it is recommended to consider
-	 *   the difference between wanted channel frequency and the
-	 *   current channel frequency.  Unnecessary charge pump action
-	 *   will result in very low tuning voltage which may drive the
-	 *   oscillator to extreme conditions.
-	 *
-	 * Set cb_first_if_lower_freq to 1, if this check is
-	 * required for this tuner.
-	 *
-	 * I tested this for PAL by first setting the TV frequency to
-	 * 203 MHz and then switching to 96.6 MHz FM radio. The result was
-	 * static unless the control byte was sent first.
-	 */
 	unsigned int cb_first_if_lower_freq:1;
-	/* Set to 1 if this tuner uses a tda9887 */
 	unsigned int has_tda9887:1;
-	/* Many Philips tuners use tda9887 PORT1 to select the FM radio
-	   sensitivity. If this setting is 1, then set PORT1 to 1 to
-	   get proper FM reception. */
 	unsigned int port1_fm_high_sensitivity:1;
-	/* Some Philips tuners use tda9887 PORT2 to select the FM radio
-	   sensitivity. If this setting is 1, then set PORT2 to 1 to
-	   get proper FM reception. */
 	unsigned int port2_fm_high_sensitivity:1;
-	/* Some Philips tuners use tda9887 cGainNormal to select the FM radio
-	   sensitivity. If this setting is 1, e register will use cGainNormal
-	   instead of cGainLow. */
 	unsigned int fm_gain_normal:1;
-	/* Most tuners with a tda9887 use QSS mode. Some (cheaper) tuners
-	   use Intercarrier mode. If this setting is 1, then the tuner
-	   needs to be set to intercarrier mode. */
 	unsigned int intercarrier_mode:1;
-	/* This setting sets the default value for PORT1.
-	   0 means inactive, 1 means active. Note: the actual bit
-	   value written to the tda9887 is inverted. So a 0 here
-	   means a 1 in the B6 bit. */
 	unsigned int port1_active:1;
-	/* This setting sets the default value for PORT2.
-	   0 means inactive, 1 means active. Note: the actual bit
-	   value written to the tda9887 is inverted. So a 0 here
-	   means a 1 in the B7 bit. */
 	unsigned int port2_active:1;
-	/* Sometimes PORT1 is inverted when the SECAM-L' standard is selected.
-	   Set this bit to 1 if this is needed. */
 	unsigned int port1_invert_for_secam_lc:1;
-	/* Sometimes PORT2 is inverted when the SECAM-L' standard is selected.
-	   Set this bit to 1 if this is needed. */
 	unsigned int port2_invert_for_secam_lc:1;
-	/* Some cards require PORT1 to be 1 for mono Radio FM and 0 for stereo. */
 	unsigned int port1_set_for_fm_mono:1;
-	/* Select 18% (or according to datasheet 0%) L standard PLL gating,
-	   vs the driver default of 36%. */
 	unsigned int default_pll_gating_18:1;
-	/* IF to use in radio mode.  Tuners with a separate radio IF filter
-	   seem to use 10.7, while those without use 33.3 for PAL/SECAM tuners
-	   and 41.3 for NTSC tuners. 0 = 10.7, 1 = 33.3, 2 = 41.3 */
 	unsigned int radio_if:2;
-	/* Default tda9887 TOP value in dB for the low band. Default is 0.
-	   Range: -16:+15 */
 	signed int default_top_low:5;
-	/* Default tda9887 TOP value in dB for the mid band. Default is 0.
-	   Range: -16:+15 */
 	signed int default_top_mid:5;
-	/* Default tda9887 TOP value in dB for the high band. Default is 0.
-	   Range: -16:+15 */
 	signed int default_top_high:5;
-	/* Default tda9887 TOP value in dB for SECAM-L/L' for the low band.
-	   Default is 0. Several tuners require a different TOP value for
-	   the SECAM-L/L' standards. Range: -16:+15 */
 	signed int default_top_secam_low:5;
-	/* Default tda9887 TOP value in dB for SECAM-L/L' for the mid band.
-	   Default is 0. Several tuners require a different TOP value for
-	   the SECAM-L/L' standards. Range: -16:+15 */
 	signed int default_top_secam_mid:5;
-	/* Default tda9887 TOP value in dB for SECAM-L/L' for the high band.
-	   Default is 0. Several tuners require a different TOP value for
-	   the SECAM-L/L' standards. Range: -16:+15 */
 	signed int default_top_secam_high:5;
 
 	u16 iffreq;
diff --git a/include/media/tuner.h b/include/media/tuner.h
index b46ebb48fe74..e5321fda5489 100644
--- a/include/media/tuner.h
+++ b/include/media/tuner.h
@@ -1,23 +1,19 @@
 /*
-    tuner.h - definition for different tuners
-
-    Copyright (C) 1997 Markus Schroeder (schroedm@uni-duesseldorf.de)
-    minor modifications by Ralph Metzler (rjkm@thp.uni-koeln.de)
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
+ * tuner.h - definition for different tuners
+ *
+ * Copyright (C) 1997 Markus Schroeder (schroedm@uni-duesseldorf.de)
+ * minor modifications by Ralph Metzler (rjkm@thp.uni-koeln.de)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
 
 #ifndef _TUNER_H
 #define _TUNER_H
@@ -25,6 +21,14 @@
 
 #include <linux/videodev2.h>
 
+/* Tuner PADs */
+/* FIXME: is this the right place for it? */
+enum tuner_pad_index {
+	TUNER_PAD_RF_INPUT,
+	TUNER_PAD_IF_OUTPUT,
+	TUNER_NUM_PADS
+};
+
 #define ADDR_UNSET (255)
 
 #define TUNER_TEMIC_PAL			0        /* 4002 FH5 (3X 7756, 9483) */
@@ -83,8 +87,11 @@
 #define TUNER_PHILIPS_FM1236_MK3	43
 
 #define TUNER_PHILIPS_4IN1		44	/* ATI TV Wonder Pro - Conexant */
-/* Microtune merged with Temic 12/31/1999 partially financed by Alps - these may be similar to Temic */
-#define TUNER_MICROTUNE_4049FM5 	45
+	/*
+	 * Microtune merged with Temic 12/31/1999 partially financed by Alps.
+	 * these may be similar to Temic
+	 */
+#define TUNER_MICROTUNE_4049FM5		45
 #define TUNER_PANASONIC_VP27		46
 #define TUNER_LG_NTSC_TAPE		47
 
@@ -115,11 +122,11 @@
 
 #define TUNER_PHILIPS_TUV1236D		68	/* ATI HDTV Wonder */
 #define TUNER_TNF_5335MF                69	/* Sabrent Bt848   */
-#define TUNER_SAMSUNG_TCPN_2121P30A     70 	/* Hauppauge PVR-500MCE NTSC */
+#define TUNER_SAMSUNG_TCPN_2121P30A     70	/* Hauppauge PVR-500MCE NTSC */
 #define TUNER_XC2028			71
 
 #define TUNER_THOMSON_FE6600		72	/* DViCO FusionHDTV DVB-T Hybrid */
-#define TUNER_SAMSUNG_TCPG_6121P30A     73 	/* Hauppauge PVR-500 PAL */
+#define TUNER_SAMSUNG_TCPG_6121P30A     73	/* Hauppauge PVR-500 PAL */
 #define TUNER_TDA9887                   74      /* This tuner should be used only internally */
 #define TUNER_TEA5761			75	/* Only FM Radio Tuner */
 #define TUNER_XC5000			76	/* Xceive Silicon Tuner */
@@ -143,57 +150,92 @@
 #define TUNER_SONY_BTF_PB463Z		91	/* NTSC */
 
 /* tv card specific */
-#define TDA9887_PRESENT 		(1<<0)
-#define TDA9887_PORT1_INACTIVE 		(1<<1)
-#define TDA9887_PORT2_INACTIVE 		(1<<2)
-#define TDA9887_QSS 			(1<<3)
-#define TDA9887_INTERCARRIER 		(1<<4)
-#define TDA9887_PORT1_ACTIVE 		(1<<5)
-#define TDA9887_PORT2_ACTIVE 		(1<<6)
-#define TDA9887_INTERCARRIER_NTSC 	(1<<7)
+#define TDA9887_PRESENT			(1<<0)
+#define TDA9887_PORT1_INACTIVE		(1<<1)
+#define TDA9887_PORT2_INACTIVE		(1<<2)
+#define TDA9887_QSS			(1<<3)
+#define TDA9887_INTERCARRIER		(1<<4)
+#define TDA9887_PORT1_ACTIVE		(1<<5)
+#define TDA9887_PORT2_ACTIVE		(1<<6)
+#define TDA9887_INTERCARRIER_NTSC	(1<<7)
 /* Tuner takeover point adjustment, in dB, -16 <= top <= 15 */
-#define TDA9887_TOP_MASK 		(0x3f << 8)
-#define TDA9887_TOP_SET 		(1 << 13)
-#define TDA9887_TOP(top) 		(TDA9887_TOP_SET | (((16 + (top)) & 0x1f) << 8))
+#define TDA9887_TOP_MASK		(0x3f << 8)
+#define TDA9887_TOP_SET			(1 << 13)
+#define TDA9887_TOP(top)		(TDA9887_TOP_SET | \
+					 (((16 + (top)) & 0x1f) << 8))
 
 /* config options */
-#define TDA9887_DEEMPHASIS_MASK 	(3<<16)
-#define TDA9887_DEEMPHASIS_NONE 	(1<<16)
-#define TDA9887_DEEMPHASIS_50 		(2<<16)
-#define TDA9887_DEEMPHASIS_75 		(3<<16)
-#define TDA9887_AUTOMUTE 		(1<<18)
+#define TDA9887_DEEMPHASIS_MASK		(3<<16)
+#define TDA9887_DEEMPHASIS_NONE		(1<<16)
+#define TDA9887_DEEMPHASIS_50		(2<<16)
+#define TDA9887_DEEMPHASIS_75		(3<<16)
+#define TDA9887_AUTOMUTE		(1<<18)
 #define TDA9887_GATING_18		(1<<19)
 #define TDA9887_GAIN_NORMAL		(1<<20)
 #define TDA9887_RIF_41_3		(1<<21)  /* radio IF1 41.3 vs 33.3 */
 
+/**
+ * enum tuner_mode      - Mode of the tuner
+ *
+ * @T_RADIO:        Tuner core will work in radio mode
+ * @T_ANALOG_TV:    Tuner core will work in analog TV mode
+ *
+ * Older boards only had a single tuner device, but some devices have a
+ * separate tuner for radio. In any case, the tuner-core needs to know if
+ * the tuner chip(s) will be used in radio mode or analog TV mode, as, on
+ * radio mode, frequencies are specified on a different range than on TV
+ * mode. This enum is used by the tuner core in order to work with the
+ * proper tuner range and eventually use a different tuner chip while in
+ * radio mode.
+ */
 enum tuner_mode {
 	T_RADIO		= 1 << V4L2_TUNER_RADIO,
 	T_ANALOG_TV     = 1 << V4L2_TUNER_ANALOG_TV,
-	/* Don't need to map V4L2_TUNER_DIGITAL_TV, as tuner-core won't use it */
+	/* Don't map V4L2_TUNER_DIGITAL_TV, as tuner-core won't use it */
 };
 
-/* Older boards only had a single tuner device. Nowadays multiple tuner
-   devices may be present on a single board. Using TUNER_SET_TYPE_ADDR
-   to pass the tuner_setup structure it is possible to setup each tuner
-   device in turn.
-
-   Since multiple devices may be present it is no longer sufficient to
-   send a command to a single i2c device. Instead you should broadcast
-   the command to all i2c devices.
-
-   By setting the mode_mask correctly you can select which commands are
-   accepted by a specific tuner device. For example, set mode_mask to
-   T_RADIO if the device is a radio-only tuner. That specific tuner will
-   only accept commands when the tuner is in radio mode and ignore them
-   when the tuner is set to TV mode.
+/**
+ * struct tuner_setup   - setup the tuner chipsets
+ *
+ * @addr:		I2C address used to control the tuner device/chipset
+ * @type:		Type of the tuner, as defined at the TUNER_* macros.
+ *			Each different tuner model should have an unique
+ *			identifier.
+ * @mode_mask:		Mask with the allowed tuner modes: V4L2_TUNER_RADIO,
+ *			V4L2_TUNER_ANALOG_TV and/or V4L2_TUNER_DIGITAL_TV,
+ *			describing if the tuner should be used to support
+ *			Radio, analog TV and/or digital TV.
+ * @config:		Used to send tuner-specific configuration for complex
+ *			tuners that require extra parameters to be set.
+ *			Only a very few tuners require it and its usage on
+ *			newer tuners should be avoided.
+ * @tuner_callback:	Some tuners require to call back the bridge driver,
+ *			in order to do some tasks like rising a GPIO at the
+ *			bridge chipset, in order to do things like resetting
+ *			the device.
+ *
+ * Older boards only had a single tuner device. Nowadays multiple tuner
+ * devices may be present on a single board. Using TUNER_SET_TYPE_ADDR
+ * to pass the tuner_setup structure it is possible to setup each tuner
+ * device in turn.
+ *
+ * Since multiple devices may be present it is no longer sufficient to
+ * send a command to a single i2c device. Instead you should broadcast
+ * the command to all i2c devices.
+ *
+ * By setting the mode_mask correctly you can select which commands are
+ * accepted by a specific tuner device. For example, set mode_mask to
+ * T_RADIO if the device is a radio-only tuner. That specific tuner will
+ * only accept commands when the tuner is in radio mode and ignore them
+ * when the tuner is set to TV mode.
  */
 
 struct tuner_setup {
-	unsigned short	addr; 	/* I2C address */
-	unsigned int	type;   /* Tuner type */
-	unsigned int	mode_mask;  /* Allowed tuner modes */
-	void		*config;    /* configuraion for more complex tuners */
-	int (*tuner_callback) (void *dev, int component, int cmd, int arg);
+	unsigned short	addr;
+	unsigned int	type;
+	unsigned int	mode_mask;
+	void		*config;
+	int (*tuner_callback)(void *dev, int component, int cmd, int arg);
 };
 
 #endif /* __KERNEL__ */
diff --git a/include/media/tveeprom.h b/include/media/tveeprom.h
index f7119ee3977b..8be898739e0c 100644
--- a/include/media/tveeprom.h
+++ b/include/media/tveeprom.h
@@ -1,28 +1,63 @@
+
 /*
+ * tveeprom - Contains structures and functions to work with Hauppauge
+ *	      eeproms.
  */
 
+#include <linux/if_ether.h>
+
+/**
+ * enum tveeprom_audio_processor - Specifies the type of audio processor
+ *				   used on a Hauppauge device.
+ *
+ * @TVEEPROM_AUDPROC_NONE:	No audio processor present
+ * @TVEEPROM_AUDPROC_INTERNAL:	The audio processor is internal to the
+ *				video processor
+ * @TVEEPROM_AUDPROC_MSP:	The audio processor is a MSPXXXX device
+ * @TVEEPROM_AUDPROC_OTHER:	The audio processor is another device
+ */
 enum tveeprom_audio_processor {
-	/* No audio processor present */
 	TVEEPROM_AUDPROC_NONE,
-	/* The audio processor is internal to the video processor */
 	TVEEPROM_AUDPROC_INTERNAL,
-	/* The audio processor is a MSPXXXX device */
 	TVEEPROM_AUDPROC_MSP,
-	/* The audio processor is another device */
 	TVEEPROM_AUDPROC_OTHER,
 };
 
-#include <linux/if_ether.h>
-
+/**
+ * struct tveeprom - Contains the fields parsed from Hauppauge eeproms
+ *
+ * @has_radio:			1 if the device has radio; 0 otherwise.
+ * @has_ir:			If has_ir == 0, then it is unknown what the IR
+ *				capabilities are. Otherwise:
+ *					bit 0) 1 (= IR capabilities are known);
+ *					bit 1) IR receiver present;
+ *					bit 2) IR transmitter (blaster) present.
+ * @has_MAC_address:		0: no MAC, 1: MAC present, 2: unknown.
+ * @tuner_type:			type of the tuner (TUNER_*, as defined at
+ *				include/media/tuner.h).
+ * @tuner_formats:		Supported analog TV standards (V4L2_STD_*).
+ * @tuner_hauppauge_model:	Hauppauge's code for the device model number.
+ * @tuner2_type:		type of the second tuner (TUNER_*, as defined
+ *				at include/media/tuner.h).
+ * @tuner2_formats:		Tuner 2 supported analog TV standards
+ *				(V4L2_STD_*).
+ * @tuner2_hauppauge_model:	tuner 2 Hauppauge's code for the device model
+ *				number.
+ * @audio_processor:		analog audio decoder, as defined by enum
+ *				tveeprom_audio_processor.
+ * @decoder_processor:		Hauppauge's code for the decoder chipset.
+ *				Unused by the drivers, as they probe the
+ *				decoder based on the PCI or USB ID.
+ * @model:			Hauppauge's model number
+ * @revision:			Card revision number
+ * @serial_number:		Card's serial number
+ * @rev_str:			Card revision converted to number
+ * @MAC_address:		MAC address for the network interface
+ */
 struct tveeprom {
 	u32 has_radio;
-	/* If has_ir == 0, then it is unknown what the IR capabilities are,
-	   otherwise:
-	   bit 0: 1 (= IR capabilities are known)
-	   bit 1: IR receiver present
-	   bit 2: IR transmitter (blaster) present */
 	u32 has_ir;
-	u32 has_MAC_address; /* 0: no MAC, 1: MAC present, 2: unknown */
+	u32 has_MAC_address;
 
 	u32 tuner_type;
 	u32 tuner_formats;
@@ -32,9 +67,6 @@ struct tveeprom {
 	u32 tuner2_formats;
 	u32 tuner2_hauppauge_model;
 
-	u32 digitizer;
-	u32 digitizer_formats;
-
 	u32 audio_processor;
 	u32 decoder_processor;
 
@@ -45,7 +77,28 @@ struct tveeprom {
 	u8 MAC_address[ETH_ALEN];
 };
 
+/**
+ * tveeprom_hauppauge_analog - Fill struct tveeprom using the contents
+ *			       of the eeprom previously filled at
+ *			       @eeprom_data field.
+ *
+ * @c:			I2C client struct
+ * @tvee:		Struct to where the eeprom parsed data will be filled;
+ * @eeprom_data:	Array with the contents of the eeprom_data. It should
+ *			contain 256 bytes filled with the contents of the
+ *			eeprom read from the Hauppauge device.
+ */
 void tveeprom_hauppauge_analog(struct i2c_client *c, struct tveeprom *tvee,
 			       unsigned char *eeprom_data);
 
+/**
+ * tveeprom_read - Reads the contents of the eeprom found at the Hauppauge
+ *		   devices.
+ *
+ * @c:		I2C client struct
+ * @eedata:	Array where the eeprom content will be stored.
+ * @len:	Size of @eedata array. If the eeprom content will be latter
+ *		be parsed by tveeprom_hauppauge_analog(), len should be, at
+ *		least, 256.
+ */
 int tveeprom_read(struct i2c_client *c, unsigned char *eedata, int len);
diff --git a/include/media/v4l2-clk.h b/include/media/v4l2-clk.h
index 3ef6e3d5ed6c..2b94662d005c 100644
--- a/include/media/v4l2-clk.h
+++ b/include/media/v4l2-clk.h
@@ -65,7 +65,12 @@ static inline struct v4l2_clk *v4l2_clk_register_fixed(const char *dev_id,
 	return __v4l2_clk_register_fixed(dev_id, rate, THIS_MODULE);
 }
 
+#define V4L2_CLK_NAME_SIZE 64
+
 #define v4l2_clk_name_i2c(name, size, adap, client) snprintf(name, size, \
 			  "%d-%04x", adap, client)
 
+#define v4l2_clk_name_of(name, size, of_full_name) snprintf(name, size, \
+			  "of-%s", of_full_name)
+
 #endif
diff --git a/include/media/v4l2-dev.h b/include/media/v4l2-dev.h
index acbcd2f5fe7f..eeabf20e87a6 100644
--- a/include/media/v4l2-dev.h
+++ b/include/media/v4l2-dev.h
@@ -86,6 +86,7 @@ struct video_device
 {
 #if defined(CONFIG_MEDIA_CONTROLLER)
 	struct media_entity entity;
+	struct media_intf_devnode *intf_devnode;
 #endif
 	/* device ops */
 	const struct v4l2_file_operations *fops;
diff --git a/include/media/v4l2-dv-timings.h b/include/media/v4l2-dv-timings.h
index b6130b50a0f1..1113c8874c26 100644
--- a/include/media/v4l2-dv-timings.h
+++ b/include/media/v4l2-dv-timings.h
@@ -23,7 +23,7 @@
 
 #include <linux/videodev2.h>
 
-/**
+/*
  * v4l2_dv_timings_presets: list of all dv_timings presets.
  */
 extern const struct v4l2_dv_timings v4l2_dv_timings_presets[];
@@ -107,12 +107,14 @@ bool v4l2_find_dv_timings_cap(struct v4l2_dv_timings *t,
  * @standard:	  the timings according to the standard.
  * @pclock_delta: maximum delta in Hz between standard->pixelclock and
  * 		the measured timings.
+ * @match_reduced_fps: if true, then fail if V4L2_DV_FL_REDUCED_FPS does not
+ * match.
  *
  * Returns true if the two timings match, returns false otherwise.
  */
 bool v4l2_match_dv_timings(const struct v4l2_dv_timings *measured,
 			   const struct v4l2_dv_timings *standard,
-			   unsigned pclock_delta);
+			   unsigned pclock_delta, bool match_reduced_fps);
 
 /**
  * v4l2_print_dv_timings() - log the contents of a dv_timings struct
@@ -127,16 +129,16 @@ void v4l2_print_dv_timings(const char *dev_prefix, const char *prefix,
 /**
  * v4l2_detect_cvt - detect if the given timings follow the CVT standard
  *
- * @frame_height - the total height of the frame (including blanking) in lines.
- * @hfreq - the horizontal frequency in Hz.
- * @vsync - the height of the vertical sync in lines.
- * @active_width - active width of image (does not include blanking). This
+ * @frame_height: the total height of the frame (including blanking) in lines.
+ * @hfreq: the horizontal frequency in Hz.
+ * @vsync: the height of the vertical sync in lines.
+ * @active_width: active width of image (does not include blanking). This
  * information is needed only in case of version 2 of reduced blanking.
  * In other cases, this parameter does not have any effect on timings.
- * @polarities - the horizontal and vertical polarities (same as struct
+ * @polarities: the horizontal and vertical polarities (same as struct
  *		v4l2_bt_timings polarities).
- * @interlaced - if this flag is true, it indicates interlaced format
- * @fmt - the resulting timings.
+ * @interlaced: if this flag is true, it indicates interlaced format
+ * @fmt: the resulting timings.
  *
  * This function will attempt to detect if the given values correspond to a
  * valid CVT format. If so, then it will return true, and fmt will be filled
@@ -149,18 +151,18 @@ bool v4l2_detect_cvt(unsigned frame_height, unsigned hfreq, unsigned vsync,
 /**
  * v4l2_detect_gtf - detect if the given timings follow the GTF standard
  *
- * @frame_height - the total height of the frame (including blanking) in lines.
- * @hfreq - the horizontal frequency in Hz.
- * @vsync - the height of the vertical sync in lines.
- * @polarities - the horizontal and vertical polarities (same as struct
+ * @frame_height: the total height of the frame (including blanking) in lines.
+ * @hfreq: the horizontal frequency in Hz.
+ * @vsync: the height of the vertical sync in lines.
+ * @polarities: the horizontal and vertical polarities (same as struct
  *		v4l2_bt_timings polarities).
- * @interlaced - if this flag is true, it indicates interlaced format
- * @aspect - preferred aspect ratio. GTF has no method of determining the
+ * @interlaced: if this flag is true, it indicates interlaced format
+ * @aspect: preferred aspect ratio. GTF has no method of determining the
  *		aspect ratio in order to derive the image width from the
  *		image height, so it has to be passed explicitly. Usually
  *		the native screen aspect ratio is used for this. If it
  *		is not filled in correctly, then 16:9 will be assumed.
- * @fmt - the resulting timings.
+ * @fmt: the resulting timings.
  *
  * This function will attempt to detect if the given values correspond to a
  * valid GTF format. If so, then it will return true, and fmt will be filled
@@ -174,8 +176,8 @@ bool v4l2_detect_gtf(unsigned frame_height, unsigned hfreq, unsigned vsync,
  * v4l2_calc_aspect_ratio - calculate the aspect ratio based on bytes
  *	0x15 and 0x16 from the EDID.
  *
- * @hor_landscape - byte 0x15 from the EDID.
- * @vert_portrait - byte 0x16 from the EDID.
+ * @hor_landscape: byte 0x15 from the EDID.
+ * @vert_portrait: byte 0x16 from the EDID.
  *
  * Determines the aspect ratio from the EDID.
  * See VESA Enhanced EDID standard, release A, rev 2, section 3.6.2:
@@ -183,4 +185,25 @@ bool v4l2_detect_gtf(unsigned frame_height, unsigned hfreq, unsigned vsync,
  */
 struct v4l2_fract v4l2_calc_aspect_ratio(u8 hor_landscape, u8 vert_portrait);
 
+/*
+ * reduce_fps - check if conditions for reduced fps are true.
+ * bt - v4l2 timing structure
+ * For different timings reduced fps is allowed if following conditions
+ * are met -
+ * For CVT timings: if reduced blanking v2 (vsync == 8) is true.
+ * For CEA861 timings: if V4L2_DV_FL_CAN_REDUCE_FPS flag is true.
+ */
+static inline  bool can_reduce_fps(struct v4l2_bt_timings *bt)
+{
+	if ((bt->standards & V4L2_DV_BT_STD_CVT) && (bt->vsync == 8))
+		return true;
+
+	if ((bt->standards & V4L2_DV_BT_STD_CEA861) &&
+	    (bt->flags & V4L2_DV_FL_CAN_REDUCE_FPS))
+		return true;
+
+	return false;
+}
+
+
 #endif
diff --git a/include/media/v4l2-ioctl.h b/include/media/v4l2-ioctl.h
index 8fbbd76d78e8..017ffb2220c7 100644
--- a/include/media/v4l2-ioctl.h
+++ b/include/media/v4l2-ioctl.h
@@ -36,6 +36,8 @@ struct v4l2_ioctl_ops {
 					      struct v4l2_fmtdesc *f);
 	int (*vidioc_enum_fmt_sdr_cap)     (struct file *file, void *fh,
 					    struct v4l2_fmtdesc *f);
+	int (*vidioc_enum_fmt_sdr_out)     (struct file *file, void *fh,
+					    struct v4l2_fmtdesc *f);
 
 	/* VIDIOC_G_FMT handlers */
 	int (*vidioc_g_fmt_vid_cap)    (struct file *file, void *fh,
@@ -60,6 +62,8 @@ struct v4l2_ioctl_ops {
 					   struct v4l2_format *f);
 	int (*vidioc_g_fmt_sdr_cap)    (struct file *file, void *fh,
 					struct v4l2_format *f);
+	int (*vidioc_g_fmt_sdr_out)    (struct file *file, void *fh,
+					struct v4l2_format *f);
 
 	/* VIDIOC_S_FMT handlers */
 	int (*vidioc_s_fmt_vid_cap)    (struct file *file, void *fh,
@@ -84,6 +88,8 @@ struct v4l2_ioctl_ops {
 					   struct v4l2_format *f);
 	int (*vidioc_s_fmt_sdr_cap)    (struct file *file, void *fh,
 					struct v4l2_format *f);
+	int (*vidioc_s_fmt_sdr_out)    (struct file *file, void *fh,
+					struct v4l2_format *f);
 
 	/* VIDIOC_TRY_FMT handlers */
 	int (*vidioc_try_fmt_vid_cap)    (struct file *file, void *fh,
@@ -108,6 +114,8 @@ struct v4l2_ioctl_ops {
 					     struct v4l2_format *f);
 	int (*vidioc_try_fmt_sdr_cap)    (struct file *file, void *fh,
 					  struct v4l2_format *f);
+	int (*vidioc_try_fmt_sdr_out)    (struct file *file, void *fh,
+					  struct v4l2_format *f);
 
 	/* Buffer handlers */
 	int (*vidioc_reqbufs) (struct file *file, void *fh, struct v4l2_requestbuffers *b);
diff --git a/include/media/v4l2-mem2mem.h b/include/media/v4l2-mem2mem.h
index 8849aaba6aa5..5a9597dd1ee0 100644
--- a/include/media/v4l2-mem2mem.h
+++ b/include/media/v4l2-mem2mem.h
@@ -17,7 +17,7 @@
 #ifndef _MEDIA_V4L2_MEM2MEM_H
 #define _MEDIA_V4L2_MEM2MEM_H
 
-#include <media/videobuf2-core.h>
+#include <media/videobuf2-v4l2.h>
 
 /**
  * struct v4l2_m2m_ops - mem-to-mem device driver callbacks
@@ -90,7 +90,7 @@ struct v4l2_m2m_ctx {
 };
 
 struct v4l2_m2m_buffer {
-	struct vb2_buffer	vb;
+	struct vb2_v4l2_buffer	vb;
 	struct list_head	list;
 };
 
@@ -105,9 +105,9 @@ void v4l2_m2m_job_finish(struct v4l2_m2m_dev *m2m_dev,
 			 struct v4l2_m2m_ctx *m2m_ctx);
 
 static inline void
-v4l2_m2m_buf_done(struct vb2_buffer *buf, enum vb2_buffer_state state)
+v4l2_m2m_buf_done(struct vb2_v4l2_buffer *buf, enum vb2_buffer_state state)
 {
-	vb2_buffer_done(buf, state);
+	vb2_buffer_done(&buf->vb2_buf, state);
 }
 
 int v4l2_m2m_reqbufs(struct file *file, struct v4l2_m2m_ctx *m2m_ctx,
@@ -160,7 +160,8 @@ static inline void v4l2_m2m_set_dst_buffered(struct v4l2_m2m_ctx *m2m_ctx,
 
 void v4l2_m2m_ctx_release(struct v4l2_m2m_ctx *m2m_ctx);
 
-void v4l2_m2m_buf_queue(struct v4l2_m2m_ctx *m2m_ctx, struct vb2_buffer *vb);
+void v4l2_m2m_buf_queue(struct v4l2_m2m_ctx *m2m_ctx,
+			struct vb2_v4l2_buffer *vbuf);
 
 /**
  * v4l2_m2m_num_src_bufs_ready() - return the number of source buffers ready for
diff --git a/include/media/videobuf2-core.h b/include/media/videobuf2-core.h
index 589b56c68400..8a0f55b6c2ba 100644
--- a/include/media/videobuf2-core.h
+++ b/include/media/videobuf2-core.h
@@ -1,5 +1,5 @@
 /*
- * videobuf2-core.h - V4L2 driver helper framework
+ * videobuf2-core.h - Video Buffer 2 Core Framework
  *
  * Copyright (C) 2010 Samsung Electronics
  *
@@ -15,9 +15,18 @@
 #include <linux/mm_types.h>
 #include <linux/mutex.h>
 #include <linux/poll.h>
-#include <linux/videodev2.h>
 #include <linux/dma-buf.h>
 
+#define VB2_MAX_FRAME	(32)
+#define VB2_MAX_PLANES	(8)
+
+enum vb2_memory {
+	VB2_MEMORY_UNKNOWN	= 0,
+	VB2_MEMORY_MMAP		= 1,
+	VB2_MEMORY_USERPTR	= 2,
+	VB2_MEMORY_DMABUF	= 4,
+};
+
 struct vb2_alloc_ctx;
 struct vb2_fileio_data;
 struct vb2_threadio_data;
@@ -36,6 +45,8 @@ struct vb2_threadio_data;
  *		no other users of this buffer are present); the buf_priv
  *		argument is the allocator private per-buffer structure
  *		previously returned from the alloc callback.
+ * @get_dmabuf: acquire userspace memory for a hardware operation; used for
+ *		 DMABUF memory types.
  * @get_userptr: acquire userspace memory for a hardware operation; used for
  *		 USERPTR memory types; vaddr is the address passed to the
  *		 videobuf layer when queuing a video buffer of USERPTR type;
@@ -111,10 +122,43 @@ struct vb2_mem_ops {
 	int		(*mmap)(void *buf_priv, struct vm_area_struct *vma);
 };
 
+/**
+ * struct vb2_plane - plane information
+ * @mem_priv:	private data with this plane
+ * @dbuf:	dma_buf - shared buffer object
+ * @dbuf_mapped:	flag to show whether dbuf is mapped or not
+ * @bytesused:	number of bytes occupied by data in the plane (payload)
+ * @length:	size of this plane (NOT the payload) in bytes
+ * @min_length:	minimum required size of this plane (NOT the payload) in bytes.
+ *		@length is always greater or equal to @min_length.
+ * @offset:	when memory in the associated struct vb2_buffer is
+ *		VB2_MEMORY_MMAP, equals the offset from the start of
+ *		the device memory for this plane (or is a "cookie" that
+ *		should be passed to mmap() called on the video node)
+ * @userptr:	when memory is VB2_MEMORY_USERPTR, a userspace pointer
+ *		pointing to this plane
+ * @fd:		when memory is VB2_MEMORY_DMABUF, a userspace file
+ *		descriptor associated with this plane
+ * @m:		Union with memtype-specific data (@offset, @userptr or
+ *		@fd).
+ * @data_offset:	offset in the plane to the start of data; usually 0,
+ *		unless there is a header in front of the data
+ * Should contain enough information to be able to cover all the fields
+ * of struct v4l2_plane at videodev2.h
+ */
 struct vb2_plane {
 	void			*mem_priv;
 	struct dma_buf		*dbuf;
 	unsigned int		dbuf_mapped;
+	unsigned int		bytesused;
+	unsigned int		length;
+	unsigned int		min_length;
+	union {
+		unsigned int	offset;
+		unsigned long	userptr;
+		int		fd;
+	} m;
+	unsigned int		data_offset;
 };
 
 /**
@@ -163,43 +207,36 @@ struct vb2_queue;
 
 /**
  * struct vb2_buffer - represents a video buffer
- * @v4l2_buf:		struct v4l2_buffer associated with this buffer; can
- *			be read by the driver and relevant entries can be
- *			changed by the driver in case of CAPTURE types
- *			(such as timestamp)
- * @v4l2_planes:	struct v4l2_planes associated with this buffer; can
- *			be read by the driver and relevant entries can be
- *			changed by the driver in case of CAPTURE types
- *			(such as bytesused); NOTE that even for single-planar
- *			types, the v4l2_planes[0] struct should be used
- *			instead of v4l2_buf for filling bytesused - drivers
- *			should use the vb2_set_plane_payload() function for that
  * @vb2_queue:		the queue to which this driver belongs
+ * @index:		id number of the buffer
+ * @type:		buffer type
+ * @memory:		the method, in which the actual data is passed
  * @num_planes:		number of planes in the buffer
  *			on an internal driver queue
- * @state:		current buffer state; do not change
- * @queued_entry:	entry on the queued buffers list, which holds all
- *			buffers queued from userspace
- * @done_entry:		entry on the list that stores all buffers ready to
- *			be dequeued to userspace
  * @planes:		private per-plane information; do not change
+ * @timestamp:		frame timestamp in ns
  */
 struct vb2_buffer {
-	struct v4l2_buffer	v4l2_buf;
-	struct v4l2_plane	v4l2_planes[VIDEO_MAX_PLANES];
-
 	struct vb2_queue	*vb2_queue;
-
+	unsigned int		index;
+	unsigned int		type;
+	unsigned int		memory;
 	unsigned int		num_planes;
-
-/* Private: internal use only */
+	struct vb2_plane	planes[VB2_MAX_PLANES];
+	u64			timestamp;
+
+	/* private: internal use only
+	 *
+	 * state:		current buffer state; do not change
+	 * queued_entry:	entry on the queued buffers list, which holds
+	 *			all buffers queued from userspace
+	 * done_entry:		entry on the list that stores all buffers ready
+	 *			to be dequeued to userspace
+	 */
 	enum vb2_buffer_state	state;
 
 	struct list_head	queued_entry;
 	struct list_head	done_entry;
-
-	struct vb2_plane	planes[VIDEO_MAX_PLANES];
-
 #ifdef CONFIG_VIDEO_ADV_DEBUG
 	/*
 	 * Counters for how often these buffer-related ops are
@@ -236,21 +273,26 @@ struct vb2_buffer {
  * struct vb2_ops - driver-specific callbacks
  *
  * @queue_setup:	called from VIDIOC_REQBUFS and VIDIOC_CREATE_BUFS
- *			handlers before memory allocation, or, if
- *			*num_planes != 0, after the allocation to verify a
- *			smaller number of buffers. Driver should return
- *			the required number of buffers in *num_buffers, the
- *			required number of planes per buffer in *num_planes; the
- *			size of each plane should be set in the sizes[] array
- *			and optional per-plane allocator specific context in the
- *			alloc_ctxs[] array. When called from VIDIOC_REQBUFS,
- *			fmt == NULL, the driver has to use the currently
- *			configured format and *num_buffers is the total number
- *			of buffers, that are being allocated. When called from
- *			VIDIOC_CREATE_BUFS, fmt != NULL and it describes the
- *			target frame format (if the format isn't valid the
- *			callback must return -EINVAL). In this case *num_buffers
- *			are being allocated additionally to q->num_buffers.
+ *			handlers before memory allocation. It can be called
+ *			twice: if the original number of requested buffers
+ *			could not be allocated, then it will be called a
+ *			second time with the actually allocated number of
+ *			buffers to verify if that is OK.
+ *			The driver should return the required number of buffers
+ *			in *num_buffers, the required number of planes per
+ *			buffer in *num_planes, the size of each plane should be
+ *			set in the sizes[] array and optional per-plane
+ *			allocator specific context in the alloc_ctxs[] array.
+ *			When called from VIDIOC_REQBUFS, *num_planes == 0, the
+ *			driver has to use the currently configured format to
+ *			determine the plane sizes and *num_buffers is the total
+ *			number of buffers that are being allocated. When called
+ *			from VIDIOC_CREATE_BUFS, *num_planes != 0 and it
+ *			describes the requested number of planes and sizes[]
+ *			contains the requested plane sizes. If either
+ *			*num_planes or the requested sizes are invalid callback
+ *			must return -EINVAL. In this case *num_buffers are
+ *			being allocated additionally to q->num_buffers.
  * @wait_prepare:	release any locks taken while calling vb2 functions;
  *			it is called before an ioctl needs to wait for a new
  *			buffer to arrive; required to avoid a deadlock in
@@ -312,7 +354,7 @@ struct vb2_buffer {
  *			pre-queued buffers before calling STREAMON.
  */
 struct vb2_ops {
-	int (*queue_setup)(struct vb2_queue *q, const struct v4l2_format *fmt,
+	int (*queue_setup)(struct vb2_queue *q,
 			   unsigned int *num_buffers, unsigned int *num_planes,
 			   unsigned int sizes[], void *alloc_ctxs[]);
 
@@ -330,12 +372,30 @@ struct vb2_ops {
 	void (*buf_queue)(struct vb2_buffer *vb);
 };
 
-struct v4l2_fh;
+/**
+ * struct vb2_ops - driver-specific callbacks
+ *
+ * @fill_user_buffer:	given a vb2_buffer fill in the userspace structure.
+ *			For V4L2 this is a struct v4l2_buffer.
+ * @fill_vb2_buffer:	given a userspace structure, fill in the vb2_buffer.
+ *			If the userspace structure is invalid, then this op
+ *			will return an error.
+ * @copy_timestamp:	copy the timestamp from a userspace structure to
+ *			the vb2_buffer struct.
+ */
+struct vb2_buf_ops {
+	void (*fill_user_buffer)(struct vb2_buffer *vb, void *pb);
+	int (*fill_vb2_buffer)(struct vb2_buffer *vb, const void *pb,
+				struct vb2_plane *planes);
+	void (*copy_timestamp)(struct vb2_buffer *vb, const void *pb);
+};
 
 /**
  * struct vb2_queue - a videobuf queue
  *
- * @type:	queue type (see V4L2_BUF_TYPE_* in linux/videodev2.h
+ * @type:	private buffer type whose content is defined by the vb2-core
+ *		caller. For example, for V4L2, it should match
+ *		the V4L2_BUF_TYPE_* in include/uapi/linux/videodev2.h
  * @io_modes:	supported io methods (see vb2_io_modes enum)
  * @fileio_read_once:		report EOF after reading the first buffer
  * @fileio_write_immediately:	queue buffer after each write() call
@@ -351,10 +411,13 @@ struct v4l2_fh;
  *		drivers to easily associate an owner filehandle with the queue.
  * @ops:	driver-specific callbacks
  * @mem_ops:	memory allocator specific callbacks
+ * @buf_ops:	callbacks to deliver buffer information
+ *		between user-space and kernel-space
  * @drv_priv:	driver private data
  * @buf_struct_size: size of the driver-specific buffer structure;
  *		"0" indicates the driver doesn't want to use a custom buffer
- *		structure type, so sizeof(struct vb2_buffer) will is used
+ *		structure type. for example, sizeof(struct vb2_v4l2_buffer)
+ *		will be used for v4l2.
  * @timestamp_flags: Timestamp flags; V4L2_BUF_FLAG_TIMESTAMP_* and
  *		V4L2_BUF_FLAG_TSTAMP_SRC_*
  * @gfp_flags:	additional gfp flags used when allocating the buffers.
@@ -385,6 +448,9 @@ struct v4l2_fh;
  * @waiting_for_buffers: used in poll() to check if vb2 is still waiting for
  *		buffers. Only set for capture queues if qbuf has not yet been
  *		called since poll() needs to return POLLERR in that situation.
+ * @is_multiplanar: set if buffer type is multiplanar
+ * @is_output:	set if buffer type is output
+ * @copy_timestamp: set if vb2-core should set timestamps
  * @last_buffer_dequeued: used in poll() and DQBUF to immediately return if the
  *		last decoded buffer was already dequeued. Set for capture queues
  *		when a buffer with the V4L2_BUF_FLAG_LAST is dequeued.
@@ -392,17 +458,19 @@ struct v4l2_fh;
  * @threadio:	thread io internal data, used only if thread is active
  */
 struct vb2_queue {
-	enum v4l2_buf_type		type;
+	unsigned int			type;
 	unsigned int			io_modes;
 	unsigned			fileio_read_once:1;
 	unsigned			fileio_write_immediately:1;
 	unsigned			allow_zero_bytesused:1;
 
 	struct mutex			*lock;
-	struct v4l2_fh			*owner;
+	void				*owner;
 
 	const struct vb2_ops		*ops;
 	const struct vb2_mem_ops	*mem_ops;
+	const struct vb2_buf_ops	*buf_ops;
+
 	void				*drv_priv;
 	unsigned int			buf_struct_size;
 	u32				timestamp_flags;
@@ -411,8 +479,8 @@ struct vb2_queue {
 
 	/* private: internal use only */
 	struct mutex			mmap_lock;
-	enum v4l2_memory		memory;
-	struct vb2_buffer		*bufs[VIDEO_MAX_FRAME];
+	unsigned int			memory;
+	struct vb2_buffer		*bufs[VB2_MAX_FRAME];
 	unsigned int			num_buffers;
 
 	struct list_head		queued_list;
@@ -423,13 +491,15 @@ struct vb2_queue {
 	spinlock_t			done_lock;
 	wait_queue_head_t		done_wq;
 
-	void				*alloc_ctx[VIDEO_MAX_PLANES];
-	unsigned int			plane_sizes[VIDEO_MAX_PLANES];
+	void				*alloc_ctx[VB2_MAX_PLANES];
 
 	unsigned int			streaming:1;
 	unsigned int			start_streaming_called:1;
 	unsigned int			error:1;
 	unsigned int			waiting_for_buffers:1;
+	unsigned int			is_multiplanar:1;
+	unsigned int			is_output:1;
+	unsigned int			copy_timestamp:1;
 	unsigned int			last_buffer_dequeued:1;
 
 	struct vb2_fileio_data		*fileio;
@@ -455,23 +525,27 @@ void vb2_buffer_done(struct vb2_buffer *vb, enum vb2_buffer_state state);
 void vb2_discard_done(struct vb2_queue *q);
 int vb2_wait_for_all_buffers(struct vb2_queue *q);
 
-int vb2_querybuf(struct vb2_queue *q, struct v4l2_buffer *b);
-int vb2_reqbufs(struct vb2_queue *q, struct v4l2_requestbuffers *req);
+void vb2_core_querybuf(struct vb2_queue *q, unsigned int index, void *pb);
+int vb2_core_reqbufs(struct vb2_queue *q, enum vb2_memory memory,
+		unsigned int *count);
+int vb2_core_create_bufs(struct vb2_queue *q, enum vb2_memory memory,
+		unsigned int *count, unsigned requested_planes,
+		const unsigned int requested_sizes[]);
+int vb2_core_prepare_buf(struct vb2_queue *q, unsigned int index, void *pb);
+int vb2_core_qbuf(struct vb2_queue *q, unsigned int index, void *pb);
+int vb2_core_dqbuf(struct vb2_queue *q, unsigned int *pindex, void *pb,
+		   bool nonblocking);
 
-int vb2_create_bufs(struct vb2_queue *q, struct v4l2_create_buffers *create);
-int vb2_prepare_buf(struct vb2_queue *q, struct v4l2_buffer *b);
+int vb2_core_streamon(struct vb2_queue *q, unsigned int type);
+int vb2_core_streamoff(struct vb2_queue *q, unsigned int type);
 
-int __must_check vb2_queue_init(struct vb2_queue *q);
+int vb2_core_expbuf(struct vb2_queue *q, int *fd, unsigned int type,
+		unsigned int index, unsigned int plane, unsigned int flags);
 
-void vb2_queue_release(struct vb2_queue *q);
-void vb2_queue_error(struct vb2_queue *q);
-
-int vb2_qbuf(struct vb2_queue *q, struct v4l2_buffer *b);
-int vb2_expbuf(struct vb2_queue *q, struct v4l2_exportbuffer *eb);
-int vb2_dqbuf(struct vb2_queue *q, struct v4l2_buffer *b, bool nonblocking);
+int vb2_core_queue_init(struct vb2_queue *q);
+void vb2_core_queue_release(struct vb2_queue *q);
 
-int vb2_streamon(struct vb2_queue *q, enum v4l2_buf_type type);
-int vb2_streamoff(struct vb2_queue *q, enum v4l2_buf_type type);
+void vb2_queue_error(struct vb2_queue *q);
 
 int vb2_mmap(struct vb2_queue *q, struct vm_area_struct *vma);
 #ifndef CONFIG_MMU
@@ -481,7 +555,8 @@ unsigned long vb2_get_unmapped_area(struct vb2_queue *q,
 				    unsigned long pgoff,
 				    unsigned long flags);
 #endif
-unsigned int vb2_poll(struct vb2_queue *q, struct file *file, poll_table *wait);
+unsigned int vb2_core_poll(struct vb2_queue *q, struct file *file,
+		poll_table *wait);
 size_t vb2_read(struct vb2_queue *q, char __user *data, size_t count,
 		loff_t *ppos, int nonblock);
 size_t vb2_write(struct vb2_queue *q, const char __user *data, size_t count,
@@ -573,7 +648,7 @@ static inline void vb2_set_plane_payload(struct vb2_buffer *vb,
 				 unsigned int plane_no, unsigned long size)
 {
 	if (plane_no < vb->num_planes)
-		vb->v4l2_planes[plane_no].bytesused = size;
+		vb->planes[plane_no].bytesused = size;
 }
 
 /**
@@ -585,7 +660,7 @@ static inline unsigned long vb2_get_plane_payload(struct vb2_buffer *vb,
 				 unsigned int plane_no)
 {
 	if (plane_no < vb->num_planes)
-		return vb->v4l2_planes[plane_no].bytesused;
+		return vb->planes[plane_no].bytesused;
 	return 0;
 }
 
@@ -598,7 +673,7 @@ static inline unsigned long
 vb2_plane_size(struct vb2_buffer *vb, unsigned int plane_no)
 {
 	if (plane_no < vb->num_planes)
-		return vb->v4l2_planes[plane_no].length;
+		return vb->planes[plane_no].length;
 	return 0;
 }
 
@@ -621,47 +696,10 @@ static inline void vb2_clear_last_buffer_dequeued(struct vb2_queue *q)
 }
 
 /*
- * The following functions are not part of the vb2 core API, but are simple
- * helper functions that you can use in your struct v4l2_file_operations,
- * struct v4l2_ioctl_ops and struct vb2_ops. They will serialize if vb2_queue->lock
- * or video_device->lock is set, and they will set and test vb2_queue->owner
- * to check if the calling filehandle is permitted to do the queuing operation.
+ * The following functions are not part of the vb2 core API, but are useful
+ * functions for videobuf2-*.
  */
-
-/* struct v4l2_ioctl_ops helpers */
-
-int vb2_ioctl_reqbufs(struct file *file, void *priv,
-			  struct v4l2_requestbuffers *p);
-int vb2_ioctl_create_bufs(struct file *file, void *priv,
-			  struct v4l2_create_buffers *p);
-int vb2_ioctl_prepare_buf(struct file *file, void *priv,
-			  struct v4l2_buffer *p);
-int vb2_ioctl_querybuf(struct file *file, void *priv, struct v4l2_buffer *p);
-int vb2_ioctl_qbuf(struct file *file, void *priv, struct v4l2_buffer *p);
-int vb2_ioctl_dqbuf(struct file *file, void *priv, struct v4l2_buffer *p);
-int vb2_ioctl_streamon(struct file *file, void *priv, enum v4l2_buf_type i);
-int vb2_ioctl_streamoff(struct file *file, void *priv, enum v4l2_buf_type i);
-int vb2_ioctl_expbuf(struct file *file, void *priv,
-	struct v4l2_exportbuffer *p);
-
-/* struct v4l2_file_operations helpers */
-
-int vb2_fop_mmap(struct file *file, struct vm_area_struct *vma);
-int vb2_fop_release(struct file *file);
-int _vb2_fop_release(struct file *file, struct mutex *lock);
-ssize_t vb2_fop_write(struct file *file, const char __user *buf,
-		size_t count, loff_t *ppos);
-ssize_t vb2_fop_read(struct file *file, char __user *buf,
-		size_t count, loff_t *ppos);
-unsigned int vb2_fop_poll(struct file *file, poll_table *wait);
-#ifndef CONFIG_MMU
-unsigned long vb2_fop_get_unmapped_area(struct file *file, unsigned long addr,
-		unsigned long len, unsigned long pgoff, unsigned long flags);
-#endif
-
-/* struct vb2_ops helpers, only use if vq->lock is non-NULL. */
-
-void vb2_ops_wait_prepare(struct vb2_queue *vq);
-void vb2_ops_wait_finish(struct vb2_queue *vq);
-
+bool vb2_buffer_in_use(struct vb2_queue *q, struct vb2_buffer *vb);
+int vb2_verify_memory_type(struct vb2_queue *q,
+		enum vb2_memory memory, unsigned int type);
 #endif /* _MEDIA_VIDEOBUF2_CORE_H */
diff --git a/include/media/videobuf2-dma-contig.h b/include/media/videobuf2-dma-contig.h
index 8197f87d6c61..2087c9a68be3 100644
--- a/include/media/videobuf2-dma-contig.h
+++ b/include/media/videobuf2-dma-contig.h
@@ -13,9 +13,11 @@
 #ifndef _MEDIA_VIDEOBUF2_DMA_CONTIG_H
 #define _MEDIA_VIDEOBUF2_DMA_CONTIG_H
 
-#include <media/videobuf2-core.h>
+#include <media/videobuf2-v4l2.h>
 #include <linux/dma-mapping.h>
 
+struct dma_attrs;
+
 static inline dma_addr_t
 vb2_dma_contig_plane_dma_addr(struct vb2_buffer *vb, unsigned int plane_no)
 {
@@ -24,7 +26,14 @@ vb2_dma_contig_plane_dma_addr(struct vb2_buffer *vb, unsigned int plane_no)
 	return *addr;
 }
 
-void *vb2_dma_contig_init_ctx(struct device *dev);
+void *vb2_dma_contig_init_ctx_attrs(struct device *dev,
+				    struct dma_attrs *attrs);
+
+static inline void *vb2_dma_contig_init_ctx(struct device *dev)
+{
+	return vb2_dma_contig_init_ctx_attrs(dev, NULL);
+}
+
 void vb2_dma_contig_cleanup_ctx(void *alloc_ctx);
 
 extern const struct vb2_mem_ops vb2_dma_contig_memops;
diff --git a/include/media/videobuf2-dma-sg.h b/include/media/videobuf2-dma-sg.h
index 14ce3068b642..8d1083f83c3d 100644
--- a/include/media/videobuf2-dma-sg.h
+++ b/include/media/videobuf2-dma-sg.h
@@ -13,7 +13,7 @@
 #ifndef _MEDIA_VIDEOBUF2_DMA_SG_H
 #define _MEDIA_VIDEOBUF2_DMA_SG_H
 
-#include <media/videobuf2-core.h>
+#include <media/videobuf2-v4l2.h>
 
 static inline struct sg_table *vb2_dma_sg_plane_desc(
 		struct vb2_buffer *vb, unsigned int plane_no)
diff --git a/include/media/videobuf2-dvb.h b/include/media/videobuf2-dvb.h
index 8f61456f1394..5b64c9eac2c9 100644
--- a/include/media/videobuf2-dvb.h
+++ b/include/media/videobuf2-dvb.h
@@ -6,7 +6,13 @@
 #include <dvb_demux.h>
 #include <dvb_net.h>
 #include <dvb_frontend.h>
-#include <media/videobuf2-core.h>
+
+#include <media/videobuf2-v4l2.h>
+/*
+ * TODO: This header file should be replaced with videobuf2-core.h
+ * Currently, vb2_thread is not a stuff of videobuf2-core,
+ * since vb2_thread has many dependencies on videobuf2-v4l2.
+ */
 
 struct vb2_dvb {
 	/* filling that the job of the driver */
diff --git a/include/media/videobuf2-memops.h b/include/media/videobuf2-memops.h
index 6513c7ec3116..36565c7acb54 100644
--- a/include/media/videobuf2-memops.h
+++ b/include/media/videobuf2-memops.h
@@ -14,7 +14,7 @@
 #ifndef _MEDIA_VIDEOBUF2_MEMOPS_H
 #define _MEDIA_VIDEOBUF2_MEMOPS_H
 
-#include <media/videobuf2-core.h>
+#include <media/videobuf2-v4l2.h>
 #include <linux/mm.h>
 
 /**
diff --git a/include/media/videobuf2-v4l2.h b/include/media/videobuf2-v4l2.h
new file mode 100644
index 000000000000..3cc836f76675
--- /dev/null
+++ b/include/media/videobuf2-v4l2.h
@@ -0,0 +1,113 @@
+/*
+ * videobuf2-v4l2.h - V4L2 driver helper framework
+ *
+ * Copyright (C) 2010 Samsung Electronics
+ *
+ * Author: Pawel Osciak <pawel@osciak.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation.
+ */
+#ifndef _MEDIA_VIDEOBUF2_V4L2_H
+#define _MEDIA_VIDEOBUF2_V4L2_H
+
+#include <linux/videodev2.h>
+#include <media/videobuf2-core.h>
+
+#if VB2_MAX_FRAME != VIDEO_MAX_FRAME
+#error VB2_MAX_FRAME != VIDEO_MAX_FRAME
+#endif
+
+#if VB2_MAX_PLANES != VIDEO_MAX_PLANES
+#error VB2_MAX_PLANES != VIDEO_MAX_PLANES
+#endif
+
+/**
+ * struct vb2_v4l2_buffer - video buffer information for v4l2
+ * @vb2_buf:	video buffer 2
+ * @flags:	buffer informational flags
+ * @field:	enum v4l2_field; field order of the image in the buffer
+ * @timecode:	frame timecode
+ * @sequence:	sequence count of this frame
+ * Should contain enough information to be able to cover all the fields
+ * of struct v4l2_buffer at videodev2.h
+ */
+struct vb2_v4l2_buffer {
+	struct vb2_buffer	vb2_buf;
+
+	__u32			flags;
+	__u32			field;
+	struct v4l2_timecode	timecode;
+	__u32			sequence;
+};
+
+/*
+ * to_vb2_v4l2_buffer() - cast struct vb2_buffer * to struct vb2_v4l2_buffer *
+ */
+#define to_vb2_v4l2_buffer(vb) \
+	container_of(vb, struct vb2_v4l2_buffer, vb2_buf)
+
+int vb2_querybuf(struct vb2_queue *q, struct v4l2_buffer *b);
+int vb2_reqbufs(struct vb2_queue *q, struct v4l2_requestbuffers *req);
+
+int vb2_create_bufs(struct vb2_queue *q, struct v4l2_create_buffers *create);
+int vb2_prepare_buf(struct vb2_queue *q, struct v4l2_buffer *b);
+
+int vb2_qbuf(struct vb2_queue *q, struct v4l2_buffer *b);
+int vb2_expbuf(struct vb2_queue *q, struct v4l2_exportbuffer *eb);
+int vb2_dqbuf(struct vb2_queue *q, struct v4l2_buffer *b, bool nonblocking);
+
+int vb2_streamon(struct vb2_queue *q, enum v4l2_buf_type type);
+int vb2_streamoff(struct vb2_queue *q, enum v4l2_buf_type type);
+
+int __must_check vb2_queue_init(struct vb2_queue *q);
+void vb2_queue_release(struct vb2_queue *q);
+unsigned int vb2_poll(struct vb2_queue *q, struct file *file,
+		poll_table *wait);
+
+/*
+ * The following functions are not part of the vb2 core API, but are simple
+ * helper functions that you can use in your struct v4l2_file_operations,
+ * struct v4l2_ioctl_ops and struct vb2_ops. They will serialize if vb2_queue->lock
+ * or video_device->lock is set, and they will set and test vb2_queue->owner
+ * to check if the calling filehandle is permitted to do the queuing operation.
+ */
+
+/* struct v4l2_ioctl_ops helpers */
+
+int vb2_ioctl_reqbufs(struct file *file, void *priv,
+			  struct v4l2_requestbuffers *p);
+int vb2_ioctl_create_bufs(struct file *file, void *priv,
+			  struct v4l2_create_buffers *p);
+int vb2_ioctl_prepare_buf(struct file *file, void *priv,
+			  struct v4l2_buffer *p);
+int vb2_ioctl_querybuf(struct file *file, void *priv, struct v4l2_buffer *p);
+int vb2_ioctl_qbuf(struct file *file, void *priv, struct v4l2_buffer *p);
+int vb2_ioctl_dqbuf(struct file *file, void *priv, struct v4l2_buffer *p);
+int vb2_ioctl_streamon(struct file *file, void *priv, enum v4l2_buf_type i);
+int vb2_ioctl_streamoff(struct file *file, void *priv, enum v4l2_buf_type i);
+int vb2_ioctl_expbuf(struct file *file, void *priv,
+	struct v4l2_exportbuffer *p);
+
+/* struct v4l2_file_operations helpers */
+
+int vb2_fop_mmap(struct file *file, struct vm_area_struct *vma);
+int vb2_fop_release(struct file *file);
+int _vb2_fop_release(struct file *file, struct mutex *lock);
+ssize_t vb2_fop_write(struct file *file, const char __user *buf,
+		size_t count, loff_t *ppos);
+ssize_t vb2_fop_read(struct file *file, char __user *buf,
+		size_t count, loff_t *ppos);
+unsigned int vb2_fop_poll(struct file *file, poll_table *wait);
+#ifndef CONFIG_MMU
+unsigned long vb2_fop_get_unmapped_area(struct file *file, unsigned long addr,
+		unsigned long len, unsigned long pgoff, unsigned long flags);
+#endif
+
+/* struct vb2_ops helpers, only use if vq->lock is non-NULL. */
+
+void vb2_ops_wait_prepare(struct vb2_queue *vq);
+void vb2_ops_wait_finish(struct vb2_queue *vq);
+
+#endif /* _MEDIA_VIDEOBUF2_V4L2_H */
diff --git a/include/media/videobuf2-vmalloc.h b/include/media/videobuf2-vmalloc.h
index 93a76b43038d..a63fe662140a 100644
--- a/include/media/videobuf2-vmalloc.h
+++ b/include/media/videobuf2-vmalloc.h
@@ -13,7 +13,7 @@
 #ifndef _MEDIA_VIDEOBUF2_VMALLOC_H
 #define _MEDIA_VIDEOBUF2_VMALLOC_H
 
-#include <media/videobuf2-core.h>
+#include <media/videobuf2-v4l2.h>
 
 extern const struct vb2_mem_ops vb2_vmalloc_memops;