diff options
Diffstat (limited to '')
| -rw-r--r-- | include/net/mac80211.h | 223 |
1 files changed, 209 insertions, 14 deletions
diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 88219cc137c3..ac2ed8ec662b 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -6,7 +6,7 @@ * Copyright 2007-2010 Johannes Berg <johannes@sipsolutions.net> * Copyright 2013-2014 Intel Mobile Communications GmbH * Copyright (C) 2015 - 2017 Intel Deutschland GmbH - * Copyright (C) 2018 Intel Corporation + * Copyright (C) 2018 - 2019 Intel Corporation * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -108,9 +108,15 @@ * The driver is expected to initialize its private per-queue data for stations * and interfaces in the .add_interface and .sta_add ops. * - * The driver can't access the queue directly. To dequeue a frame, it calls - * ieee80211_tx_dequeue(). Whenever mac80211 adds a new frame to a queue, it - * calls the .wake_tx_queue driver op. + * The driver can't access the queue directly. To dequeue a frame from a + * txq, it calls ieee80211_tx_dequeue(). Whenever mac80211 adds a new frame to a + * queue, it calls the .wake_tx_queue driver op. + * + * Drivers can optionally delegate responsibility for scheduling queues to + * mac80211, to take advantage of airtime fairness accounting. In this case, to + * obtain the next queue to pull frames from, the driver calls + * ieee80211_next_txq(). The driver is then expected to return the txq using + * ieee80211_return_txq(). * * For AP powersave TIM handling, the driver only needs to indicate if it has * buffered packets in the driver specific data structures by calling @@ -585,6 +591,14 @@ struct ieee80211_ftm_responder_params { * @ftm_responder: whether to enable or disable fine timing measurement FTM * responder functionality. * @ftmr_params: configurable lci/civic parameter when enabling FTM responder. + * @nontransmitted: this BSS is a nontransmitted BSS profile + * @transmitter_bssid: the address of transmitter AP + * @bssid_index: index inside the multiple BSSID set + * @bssid_indicator: 2^bssid_indicator is the maximum number of APs in set + * @ema_ap: AP supports enhancements of discovery and advertisement of + * nontransmitted BSSIDs + * @profile_periodicity: the least number of beacon frames need to be received + * in order to discover all the nontransmitted BSSIDs in the set. */ struct ieee80211_bss_conf { const u8 *bssid; @@ -638,6 +652,13 @@ struct ieee80211_bss_conf { bool protected_keep_alive; bool ftm_responder; struct ieee80211_ftm_responder_params *ftmr_params; + /* Multiple BSSID data */ + bool nontransmitted; + u8 transmitter_bssid[ETH_ALEN]; + u8 bssid_index; + u8 bssid_indicator; + bool ema_ap; + u8 profile_periodicity; }; /** @@ -936,8 +957,32 @@ ieee80211_rate_get_vht_nss(const struct ieee80211_tx_rate *rate) * @band: the band to transmit on (use for checking for races) * @hw_queue: HW queue to put the frame on, skb_get_queue_mapping() gives the AC * @ack_frame_id: internal frame ID for TX status, used internally - * @control: union for control data - * @status: union for status data + * @control: union part for control data + * @control.rates: TX rates array to try + * @control.rts_cts_rate_idx: rate for RTS or CTS + * @control.use_rts: use RTS + * @control.use_cts_prot: use RTS/CTS + * @control.short_preamble: use short preamble (CCK only) + * @control.skip_table: skip externally configured rate table + * @control.jiffies: timestamp for expiry on powersave clients + * @control.vif: virtual interface (may be NULL) + * @control.hw_key: key to encrypt with (may be NULL) + * @control.flags: control flags, see &enum mac80211_tx_control_flags + * @control.enqueue_time: enqueue time (for iTXQs) + * @driver_rates: alias to @control.rates to reserve space + * @pad: padding + * @rate_driver_data: driver use area if driver needs @control.rates + * @status: union part for status data + * @status.rates: attempted rates + * @status.ack_signal: ACK signal + * @status.ampdu_ack_len: AMPDU ack length + * @status.ampdu_len: AMPDU length + * @status.antenna: (legacy, kept only for iwlegacy) + * @status.tx_time: airtime consumed for transmission + * @status.is_valid_ack_signal: ACK signal is valid + * @status.status_driver_data: driver use area + * @ack: union part for pure ACK data + * @ack.cookie: cookie for the ACK * @driver_data: array of driver_data pointers * @ampdu_ack_len: number of acked aggregated frames. * relevant only if IEEE80211_TX_STAT_AMPDU was set. @@ -1157,6 +1202,7 @@ ieee80211_tx_info_clear_status(struct ieee80211_tx_info *info) * @RX_FLAG_AMPDU_EOF_BIT_KNOWN: The EOF value is known * @RX_FLAG_RADIOTAP_HE: HE radiotap data is present * (&struct ieee80211_radiotap_he, mac80211 will fill in + * * - DATA3_DATA_MCS * - DATA3_DATA_DCM * - DATA3_CODING @@ -1164,6 +1210,7 @@ ieee80211_tx_info_clear_status(struct ieee80211_tx_info *info) * - DATA5_DATA_BW_RU_ALLOC * - DATA6_NSTS * - DATA3_STBC + * * from the RX info data, so leave those zeroed when building this data) * @RX_FLAG_RADIOTAP_HE_MU: HE MU radiotap data is present * (&struct ieee80211_radiotap_he_mu) @@ -1214,7 +1261,7 @@ enum mac80211_rx_flags { * @RX_ENC_FLAG_HT_GF: This frame was received in a HT-greenfield transmission, * if the driver fills this value it should add * %IEEE80211_RADIOTAP_MCS_HAVE_FMT - * to hw.radiotap_mcs_details to advertise that fact + * to @hw.radiotap_mcs_details to advertise that fact. * @RX_ENC_FLAG_LDPC: LDPC was used * @RX_ENC_FLAG_STBC_MASK: STBC 2 bit bitmask. 1 - Nss=1, 2 - Nss=2, 3 - Nss=3 * @RX_ENC_FLAG_BF: packet was beamformed @@ -1472,6 +1519,9 @@ struct ieee80211_conf { * scheduled channel switch, as indicated by the AP. * @chandef: the new channel to switch to * @count: the number of TBTT's until the channel switch event + * @delay: maximum delay between the time the AP transmitted the last beacon in + * current channel and the expected time of the first beacon in the new + * channel, expressed in TU. */ struct ieee80211_channel_switch { u64 timestamp; @@ -1479,6 +1529,7 @@ struct ieee80211_channel_switch { bool block_tx; struct cfg80211_chan_def chandef; u8 count; + u32 delay; }; /** @@ -2184,6 +2235,14 @@ struct ieee80211_txq { * MMPDUs on station interfaces. This of course requires the driver to use * TXQs to start with. * + * @IEEE80211_HW_TX_STATUS_NO_AMPDU_LEN: Driver does not report accurate A-MPDU + * length in tx status information + * + * @IEEE80211_HW_SUPPORTS_MULTI_BSSID: Hardware supports multi BSSID + * + * @IEEE80211_HW_SUPPORTS_ONLY_HE_MULTI_BSSID: Hardware supports multi BSSID + * only for HE APs. Applies if @IEEE80211_HW_SUPPORTS_MULTI_BSSID is set. + * * @NUM_IEEE80211_HW_FLAGS: number of hardware flags, used for sizing arrays */ enum ieee80211_hw_flags { @@ -2232,6 +2291,9 @@ enum ieee80211_hw_flags { IEEE80211_HW_BUFF_MMPDU_TXQ, IEEE80211_HW_SUPPORTS_VHT_EXT_NSS_BW, IEEE80211_HW_STA_MMPDU_TXQ, + IEEE80211_HW_TX_STATUS_NO_AMPDU_LEN, + IEEE80211_HW_SUPPORTS_MULTI_BSSID, + IEEE80211_HW_SUPPORTS_ONLY_HE_MULTI_BSSID, /* keep last, obviously */ NUM_IEEE80211_HW_FLAGS @@ -2323,12 +2385,14 @@ enum ieee80211_hw_flags { * @radiotap_he: HE radiotap validity flags * * @radiotap_timestamp: Information for the radiotap timestamp field; if the - * 'units_pos' member is set to a non-negative value it must be set to - * a combination of a IEEE80211_RADIOTAP_TIMESTAMP_UNIT_* and a - * IEEE80211_RADIOTAP_TIMESTAMP_SPOS_* value, and then the timestamp + * @units_pos member is set to a non-negative value then the timestamp * field will be added and populated from the &struct ieee80211_rx_status - * device_timestamp. If the 'accuracy' member is non-negative, it's put - * into the accuracy radiotap field and the accuracy known flag is set. + * device_timestamp. + * @radiotap_timestamp.units_pos: Must be set to a combination of a + * IEEE80211_RADIOTAP_TIMESTAMP_UNIT_* and a + * IEEE80211_RADIOTAP_TIMESTAMP_SPOS_* value. + * @radiotap_timestamp.accuracy: If non-negative, fills the accuracy in the + * radiotap field and the accuracy known flag will be set. * * @netdev_features: netdev features to be set in each netdev created * from this HW. Note that not all features are usable with mac80211, @@ -2354,6 +2418,9 @@ enum ieee80211_hw_flags { * @tx_sk_pacing_shift: Pacing shift to set on TCP sockets when frames from * them are encountered. The default should typically not be changed, * unless the driver has good reasons for needing more buffers. + * + * @weight_multiplier: Driver specific airtime weight multiplier used while + * refilling deficit of each TXQ. */ struct ieee80211_hw { struct ieee80211_conf conf; @@ -2390,6 +2457,7 @@ struct ieee80211_hw { const struct ieee80211_cipher_scheme *cipher_schemes; u8 max_nan_de_entries; u8 tx_sk_pacing_shift; + u8 weight_multiplier; }; static inline bool _ieee80211_hw_check(struct ieee80211_hw *hw, @@ -3575,7 +3643,12 @@ enum ieee80211_reconfig_type { * @post_channel_switch: This is an optional callback that is called * after a channel switch procedure is completed, allowing the * driver to go back to a normal configuration. - * + * @abort_channel_switch: This is an optional callback that is called + * when channel switch procedure was completed, allowing the + * driver to go back to a normal configuration. + * @channel_switch_rx_beacon: This is an optional callback that is called + * when channel switch procedure is in progress and additional beacon with + * CSA IE was received, allowing driver to track changes in count. * @join_ibss: Join an IBSS (on an IBSS interface); this is called after all * information in bss_conf is set up and the beacon can be retrieved. A * channel context is bound before this is called. @@ -3878,6 +3951,11 @@ struct ieee80211_ops { int (*post_channel_switch)(struct ieee80211_hw *hw, struct ieee80211_vif *vif); + void (*abort_channel_switch)(struct ieee80211_hw *hw, + struct ieee80211_vif *vif); + void (*channel_switch_rx_beacon)(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_channel_switch *ch_switch); int (*join_ibss)(struct ieee80211_hw *hw, struct ieee80211_vif *vif); void (*leave_ibss)(struct ieee80211_hw *hw, struct ieee80211_vif *vif); @@ -5402,6 +5480,34 @@ void ieee80211_sta_eosp(struct ieee80211_sta *pubsta); void ieee80211_send_eosp_nullfunc(struct ieee80211_sta *pubsta, int tid); /** + * ieee80211_sta_register_airtime - register airtime usage for a sta/tid + * + * Register airtime usage for a given sta on a given tid. The driver can call + * this function to notify mac80211 that a station used a certain amount of + * airtime. This information will be used by the TXQ scheduler to schedule + * stations in a way that ensures airtime fairness. + * + * The reported airtime should as a minimum include all time that is spent + * transmitting to the remote station, including overhead and padding, but not + * including time spent waiting for a TXOP. If the time is not reported by the + * hardware it can in some cases be calculated from the rate and known frame + * composition. When possible, the time should include any failed transmission + * attempts. + * + * The driver can either call this function synchronously for every packet or + * aggregate, or asynchronously as airtime usage information becomes available. + * TX and RX airtime can be reported together, or separately by setting one of + * them to 0. + * + * @pubsta: the station + * @tid: the TID to register airtime for + * @tx_airtime: airtime used during TX (in usec) + * @rx_airtime: airtime used during RX (in usec) + */ +void ieee80211_sta_register_airtime(struct ieee80211_sta *pubsta, u8 tid, + u32 tx_airtime, u32 rx_airtime); + +/** * ieee80211_iter_keys - iterate keys programmed into the device * @hw: pointer obtained from ieee80211_alloc_hw() * @vif: virtual interface to iterate, may be %NULL for all @@ -6103,7 +6209,8 @@ void ieee80211_unreserve_tid(struct ieee80211_sta *sta, u8 tid); * ieee80211_tx_dequeue - dequeue a packet from a software tx queue * * @hw: pointer as obtained from ieee80211_alloc_hw() - * @txq: pointer obtained from station or virtual interface + * @txq: pointer obtained from station or virtual interface, or from + * ieee80211_next_txq() * * Returns the skb if successful, %NULL if no frame was available. * @@ -6119,6 +6226,94 @@ struct sk_buff *ieee80211_tx_dequeue(struct ieee80211_hw *hw, struct ieee80211_txq *txq); /** + * ieee80211_next_txq - get next tx queue to pull packets from + * + * @hw: pointer as obtained from ieee80211_alloc_hw() + * @ac: AC number to return packets from. + * + * Should only be called between calls to ieee80211_txq_schedule_start() + * and ieee80211_txq_schedule_end(). + * Returns the next txq if successful, %NULL if no queue is eligible. If a txq + * is returned, it should be returned with ieee80211_return_txq() after the + * driver has finished scheduling it. + */ +struct ieee80211_txq *ieee80211_next_txq(struct ieee80211_hw *hw, u8 ac); + +/** + * ieee80211_return_txq - return a TXQ previously acquired by ieee80211_next_txq() + * + * @hw: pointer as obtained from ieee80211_alloc_hw() + * @txq: pointer obtained from station or virtual interface + * + * Should only be called between calls to ieee80211_txq_schedule_start() + * and ieee80211_txq_schedule_end(). + */ +void ieee80211_return_txq(struct ieee80211_hw *hw, struct ieee80211_txq *txq); + +/** + * ieee80211_txq_schedule_start - acquire locks for safe scheduling of an AC + * + * @hw: pointer as obtained from ieee80211_alloc_hw() + * @ac: AC number to acquire locks for + * + * Acquire locks needed to schedule TXQs from the given AC. Should be called + * before ieee80211_next_txq() or ieee80211_return_txq(). + */ +void ieee80211_txq_schedule_start(struct ieee80211_hw *hw, u8 ac) + __acquires(txq_lock); + +/** + * ieee80211_txq_schedule_end - release locks for safe scheduling of an AC + * + * @hw: pointer as obtained from ieee80211_alloc_hw() + * @ac: AC number to acquire locks for + * + * Release locks previously acquired by ieee80211_txq_schedule_end(). + */ +void ieee80211_txq_schedule_end(struct ieee80211_hw *hw, u8 ac) + __releases(txq_lock); + +/** + * ieee80211_schedule_txq - schedule a TXQ for transmission + * + * @hw: pointer as obtained from ieee80211_alloc_hw() + * @txq: pointer obtained from station or virtual interface + * + * Schedules a TXQ for transmission if it is not already scheduled. Takes a + * lock, which means it must *not* be called between + * ieee80211_txq_schedule_start() and ieee80211_txq_schedule_end() + */ +void ieee80211_schedule_txq(struct ieee80211_hw *hw, struct ieee80211_txq *txq) + __acquires(txq_lock) __releases(txq_lock); + +/** + * ieee80211_txq_may_transmit - check whether TXQ is allowed to transmit + * + * This function is used to check whether given txq is allowed to transmit by + * the airtime scheduler, and can be used by drivers to access the airtime + * fairness accounting without going using the scheduling order enfored by + * next_txq(). + * + * Returns %true if the airtime scheduler thinks the TXQ should be allowed to + * transmit, and %false if it should be throttled. This function can also have + * the side effect of rotating the TXQ in the scheduler rotation, which will + * eventually bring the deficit to positive and allow the station to transmit + * again. + * + * The API ieee80211_txq_may_transmit() also ensures that TXQ list will be + * aligned aginst driver's own round-robin scheduler list. i.e it rotates + * the TXQ list till it makes the requested node becomes the first entry + * in TXQ list. Thus both the TXQ list and driver's list are in sync. If this + * function returns %true, the driver is expected to schedule packets + * for transmission, and then return the TXQ through ieee80211_return_txq(). + * + * @hw: pointer as obtained from ieee80211_alloc_hw() + * @txq: pointer obtained from station or virtual interface + */ +bool ieee80211_txq_may_transmit(struct ieee80211_hw *hw, + struct ieee80211_txq *txq); + +/** * ieee80211_txq_get_depth - get pending frame/byte count of given txq * * The values are not guaranteed to be coherent with regard to each other, i.e. |