diff options
Diffstat (limited to 'include/net/mac80211.h')
| -rw-r--r-- | include/net/mac80211.h | 321 |
1 files changed, 295 insertions, 26 deletions
diff --git a/include/net/mac80211.h b/include/net/mac80211.h index e6d6a66a8f71..9259e97864d7 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -20,6 +20,7 @@ #include <linux/device.h> #include <linux/ieee80211.h> #include <net/cfg80211.h> +#include <asm/unaligned.h> /** * DOC: Introduction @@ -193,6 +194,17 @@ enum ieee80211_bss_change { #define IEEE80211_BSS_ARP_ADDR_LIST_LEN 4 /** + * enum ieee80211_rssi_event - RSSI threshold event + * An indicator for when RSSI goes below/above a certain threshold. + * @RSSI_EVENT_HIGH: AP's rssi crossed the high threshold set by the driver. + * @RSSI_EVENT_LOW: AP's rssi crossed the low threshold set by the driver. + */ +enum ieee80211_rssi_event { + RSSI_EVENT_HIGH, + RSSI_EVENT_LOW, +}; + +/** * struct ieee80211_bss_conf - holds the BSS's changing parameters * * This structure keeps information about a BSS (and an association @@ -933,6 +945,7 @@ enum set_key_cmd { * @aid: AID we assigned to the station if we're an AP * @supp_rates: Bitmap of supported rates (per band) * @ht_cap: HT capabilities of this STA; restricted to our own TX capabilities + * @wme: indicates whether the STA supports WME. Only valid during AP-mode. * @drv_priv: data area for driver use, will always be aligned to * sizeof(void *), size is determined in hw information. */ @@ -941,6 +954,7 @@ struct ieee80211_sta { u8 addr[ETH_ALEN]; u16 aid; struct ieee80211_sta_ht_cap ht_cap; + bool wme; /* must be last */ u8 drv_priv[0] __attribute__((__aligned__(sizeof(void *)))); @@ -960,21 +974,6 @@ enum sta_notify_cmd { }; /** - * enum ieee80211_tkip_key_type - get tkip key - * - * Used by drivers which need to get a tkip key for skb. Some drivers need a - * phase 1 key, others need a phase 2 key. A single function allows the driver - * to get the key, this enum indicates what type of key is required. - * - * @IEEE80211_TKIP_P1_KEY: the driver needs a phase 1 key - * @IEEE80211_TKIP_P2_KEY: the driver needs a phase 2 key - */ -enum ieee80211_tkip_key_type { - IEEE80211_TKIP_P1_KEY, - IEEE80211_TKIP_P2_KEY, -}; - -/** * enum ieee80211_hw_flags - hardware flags * * These flags are used to indicate hardware capabilities to @@ -1587,6 +1586,20 @@ enum ieee80211_ampdu_mlme_action { }; /** + * enum ieee80211_tx_sync_type - TX sync type + * @IEEE80211_TX_SYNC_AUTH: sync TX for authentication + * (and possibly also before direct probe) + * @IEEE80211_TX_SYNC_ASSOC: sync TX for association + * @IEEE80211_TX_SYNC_ACTION: sync TX for action frame + * (not implemented yet) + */ +enum ieee80211_tx_sync_type { + IEEE80211_TX_SYNC_AUTH, + IEEE80211_TX_SYNC_ASSOC, + IEEE80211_TX_SYNC_ACTION, +}; + +/** * struct ieee80211_ops - callbacks from mac80211 to the driver * * This structure contains various callbacks that the driver may @@ -1626,6 +1639,10 @@ enum ieee80211_ampdu_mlme_action { * ask the device to suspend. This is only invoked when WoWLAN is * configured, otherwise the device is deconfigured completely and * reconfigured at resume time. + * The driver may also impose special conditions under which it + * wants to use the "normal" suspend (deconfigure), say if it only + * supports WoWLAN when the device is associated. In this case, it + * must return 1 from this function. * * @resume: If WoWLAN was configured, this indicates that mac80211 is * now resuming its operation, after this the device must be fully @@ -1671,6 +1688,26 @@ enum ieee80211_ampdu_mlme_action { * of the bss parameters has changed when a call is made. The callback * can sleep. * + * @tx_sync: Called before a frame is sent to an AP/GO. In the GO case, the + * driver should sync with the GO's powersaving so the device doesn't + * transmit the frame while the GO is asleep. In the regular AP case + * it may be used by drivers for devices implementing other restrictions + * on talking to APs, e.g. due to regulatory enforcement or just HW + * restrictions. + * This function is called for every authentication, association and + * action frame separately since applications might attempt to auth + * with multiple APs before chosing one to associate to. If it returns + * an error, the corresponding authentication, association or frame + * transmission is aborted and reported as having failed. It is always + * called after tuning to the correct channel. + * The callback might be called multiple times before @finish_tx_sync + * (but @finish_tx_sync will be called once for each) but in practice + * this is unlikely to happen. It can also refuse in that case if the + * driver cannot handle that situation. + * This callback can sleep. + * @finish_tx_sync: Called as a counterpart to @tx_sync, unless that returned + * an error. This callback can sleep. + * * @prepare_multicast: Prepare for multicast filter configuration. * This callback is optional, and its return value is passed * to configure_filter(). This callback must be atomic. @@ -1694,6 +1731,12 @@ enum ieee80211_ampdu_mlme_action { * which set IEEE80211_KEY_FLAG_TKIP_REQ_RX_P1_KEY. * The callback must be atomic. * + * @set_rekey_data: If the device supports GTK rekeying, for example while the + * host is suspended, it can assign this callback to retrieve the data + * necessary to do GTK rekeying, this is the KEK, KCK and replay counter. + * After rekeying was done it should (for example during resume) notify + * userspace of the new replay counter using ieee80211_gtk_rekey_notify(). + * * @hw_scan: Ask the hardware to service the scan request, no need to start * the scan state machine in stack. The scan must honour the channel * configuration done by the regulatory agent in the wiphy's @@ -1708,6 +1751,14 @@ enum ieee80211_ampdu_mlme_action { * any error unless this callback returned a negative error code. * The callback can sleep. * + * @cancel_hw_scan: Ask the low-level tp cancel the active hw scan. + * The driver should ask the hardware to cancel the scan (if possible), + * but the scan will be completed only after the driver will call + * ieee80211_scan_completed(). + * This callback is needed for wowlan, to prevent enqueueing a new + * scan_work after the low-level driver was already suspended. + * The callback can sleep. + * * @sched_scan_start: Ask the hardware to start scanning repeatedly at * specific intervals. The driver must call the * ieee80211_sched_scan_results() function whenever it finds results. @@ -1816,6 +1867,7 @@ enum ieee80211_ampdu_mlme_action { * * @testmode_cmd: Implement a cfg80211 test mode command. * The callback can sleep. + * @testmode_dump: Implement a cfg80211 test mode dump. The callback can sleep. * * @flush: Flush all pending frames from the hardware queue, making sure * that the hardware queues are empty. If the parameter @drop is set @@ -1860,6 +1912,8 @@ enum ieee80211_ampdu_mlme_action { * @set_bitrate_mask: Set a mask of rates to be used for rate control selection * when transmitting a frame. Currently only legacy rates are handled. * The callback can sleep. + * @rssi_callback: Notify driver when the average RSSI goes above/below + * thresholds that were registered previously. The callback can sleep. */ struct ieee80211_ops { void (*tx)(struct ieee80211_hw *hw, struct sk_buff *skb); @@ -1881,6 +1935,14 @@ struct ieee80211_ops { struct ieee80211_vif *vif, struct ieee80211_bss_conf *info, u32 changed); + + int (*tx_sync)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, + const u8 *bssid, enum ieee80211_tx_sync_type type); + void (*finish_tx_sync)(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + const u8 *bssid, + enum ieee80211_tx_sync_type type); + u64 (*prepare_multicast)(struct ieee80211_hw *hw, struct netdev_hw_addr_list *mc_list); void (*configure_filter)(struct ieee80211_hw *hw, @@ -1897,8 +1959,13 @@ struct ieee80211_ops { struct ieee80211_key_conf *conf, struct ieee80211_sta *sta, u32 iv32, u16 *phase1key); + void (*set_rekey_data)(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct cfg80211_gtk_rekey_data *data); int (*hw_scan)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, struct cfg80211_scan_request *req); + void (*cancel_hw_scan)(struct ieee80211_hw *hw, + struct ieee80211_vif *vif); int (*sched_scan_start)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, struct cfg80211_sched_scan_request *req, @@ -1936,6 +2003,9 @@ struct ieee80211_ops { void (*set_coverage_class)(struct ieee80211_hw *hw, u8 coverage_class); #ifdef CONFIG_NL80211_TESTMODE int (*testmode_cmd)(struct ieee80211_hw *hw, void *data, int len); + int (*testmode_dump)(struct ieee80211_hw *hw, struct sk_buff *skb, + struct netlink_callback *cb, + void *data, int len); #endif void (*flush)(struct ieee80211_hw *hw, bool drop); void (*channel_switch)(struct ieee80211_hw *hw, @@ -1960,6 +2030,8 @@ struct ieee80211_ops { bool (*tx_frames_pending)(struct ieee80211_hw *hw); int (*set_bitrate_mask)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, const struct cfg80211_bitrate_mask *mask); + void (*rssi_callback)(struct ieee80211_hw *hw, + enum ieee80211_rssi_event rssi_event); }; /** @@ -2550,21 +2622,136 @@ struct sk_buff * ieee80211_get_buffered_bc(struct ieee80211_hw *hw, struct ieee80211_vif *vif); /** - * ieee80211_get_tkip_key - get a TKIP rc4 for skb + * ieee80211_get_tkip_p1k_iv - get a TKIP phase 1 key for IV32 + * + * This function returns the TKIP phase 1 key for the given IV32. + * + * @keyconf: the parameter passed with the set key + * @iv32: IV32 to get the P1K for + * @p1k: a buffer to which the key will be written, as 5 u16 values + */ +void ieee80211_get_tkip_p1k_iv(struct ieee80211_key_conf *keyconf, + u32 iv32, u16 *p1k); + +/** + * ieee80211_get_tkip_p1k - get a TKIP phase 1 key + * + * This function returns the TKIP phase 1 key for the IV32 taken + * from the given packet. + * + * @keyconf: the parameter passed with the set key + * @skb: the packet to take the IV32 value from that will be encrypted + * with this P1K + * @p1k: a buffer to which the key will be written, as 5 u16 values + */ +static inline void ieee80211_get_tkip_p1k(struct ieee80211_key_conf *keyconf, + struct sk_buff *skb, u16 *p1k) +{ + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; + const u8 *data = (u8 *)hdr + ieee80211_hdrlen(hdr->frame_control); + u32 iv32 = get_unaligned_le32(&data[4]); + + ieee80211_get_tkip_p1k_iv(keyconf, iv32, p1k); +} + +/** + * ieee80211_get_tkip_rx_p1k - get a TKIP phase 1 key for RX + * + * This function returns the TKIP phase 1 key for the given IV32 + * and transmitter address. + * + * @keyconf: the parameter passed with the set key + * @ta: TA that will be used with the key + * @iv32: IV32 to get the P1K for + * @p1k: a buffer to which the key will be written, as 5 u16 values + */ +void ieee80211_get_tkip_rx_p1k(struct ieee80211_key_conf *keyconf, + const u8 *ta, u32 iv32, u16 *p1k); + +/** + * ieee80211_get_tkip_p2k - get a TKIP phase 2 key + * + * This function computes the TKIP RC4 key for the IV values + * in the packet. + * + * @keyconf: the parameter passed with the set key + * @skb: the packet to take the IV32/IV16 values from that will be + * encrypted with this key + * @p2k: a buffer to which the key will be written, 16 bytes + */ +void ieee80211_get_tkip_p2k(struct ieee80211_key_conf *keyconf, + struct sk_buff *skb, u8 *p2k); + +/** + * struct ieee80211_key_seq - key sequence counter * - * This function computes a TKIP rc4 key for an skb. It computes - * a phase 1 key if needed (iv16 wraps around). This function is to - * be used by drivers which can do HW encryption but need to compute - * to phase 1/2 key in SW. + * @tkip: TKIP data, containing IV32 and IV16 in host byte order + * @ccmp: PN data, most significant byte first (big endian, + * reverse order than in packet) + * @aes_cmac: PN data, most significant byte first (big endian, + * reverse order than in packet) + */ +struct ieee80211_key_seq { + union { + struct { + u32 iv32; + u16 iv16; + } tkip; + struct { + u8 pn[6]; + } ccmp; + struct { + u8 pn[6]; + } aes_cmac; + }; +}; + +/** + * ieee80211_get_key_tx_seq - get key TX sequence counter + * + * @keyconf: the parameter passed with the set key + * @seq: buffer to receive the sequence data + * + * This function allows a driver to retrieve the current TX IV/PN + * for the given key. It must not be called if IV generation is + * offloaded to the device. + * + * Note that this function may only be called when no TX processing + * can be done concurrently, for example when queues are stopped + * and the stop has been synchronized. + */ +void ieee80211_get_key_tx_seq(struct ieee80211_key_conf *keyconf, + struct ieee80211_key_seq *seq); + +/** + * ieee80211_get_key_rx_seq - get key RX sequence counter * * @keyconf: the parameter passed with the set key - * @skb: the skb for which the key is needed - * @type: TBD - * @key: a buffer to which the key will be written + * @tid: The TID, or -1 for the management frame value (CCMP only); + * the value on TID 0 is also used for non-QoS frames. For + * CMAC, only TID 0 is valid. + * @seq: buffer to receive the sequence data + * + * This function allows a driver to retrieve the current RX IV/PNs + * for the given key. It must not be called if IV checking is done + * by the device and not by mac80211. + * + * Note that this function may only be called when no RX processing + * can be done concurrently. */ -void ieee80211_get_tkip_key(struct ieee80211_key_conf *keyconf, - struct sk_buff *skb, - enum ieee80211_tkip_key_type type, u8 *key); +void ieee80211_get_key_rx_seq(struct ieee80211_key_conf *keyconf, + int tid, struct ieee80211_key_seq *seq); + +/** + * ieee80211_gtk_rekey_notify - notify userspace supplicant of rekeying + * @vif: virtual interface the rekeying was done on + * @bssid: The BSSID of the AP, for checking association + * @replay_ctr: the new replay counter after GTK rekeying + * @gfp: allocation flags + */ +void ieee80211_gtk_rekey_notify(struct ieee80211_vif *vif, const u8 *bssid, + const u8 *replay_ctr, gfp_t gfp); + /** * ieee80211_wake_queue - wake specific queue * @hw: pointer as obtained from ieee80211_alloc_hw(). @@ -2830,6 +3017,33 @@ void ieee80211_sta_block_awake(struct ieee80211_hw *hw, struct ieee80211_sta *pubsta, bool block); /** + * ieee80211_iter_keys - iterate keys programmed into the device + * @hw: pointer obtained from ieee80211_alloc_hw() + * @vif: virtual interface to iterate, may be %NULL for all + * @iter: iterator function that will be called for each key + * @iter_data: custom data to pass to the iterator function + * + * This function can be used to iterate all the keys known to + * mac80211, even those that weren't previously programmed into + * the device. This is intended for use in WoWLAN if the device + * needs reprogramming of the keys during suspend. Note that due + * to locking reasons, it is also only safe to call this at few + * spots since it must hold the RTNL and be able to sleep. + * + * The order in which the keys are iterated matches the order + * in which they were originally installed and handed to the + * set_key callback. + */ +void ieee80211_iter_keys(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + void (*iter)(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_sta *sta, + struct ieee80211_key_conf *key, + void *data), + void *iter_data); + +/** * ieee80211_ap_probereq_get - retrieve a Probe Request template * @hw: pointer obtained from ieee80211_alloc_hw(). * @vif: &struct ieee80211_vif pointer from the add_interface callback. @@ -2870,6 +3084,29 @@ void ieee80211_beacon_loss(struct ieee80211_vif *vif); void ieee80211_connection_loss(struct ieee80211_vif *vif); /** + * ieee80211_resume_disconnect - disconnect from AP after resume + * + * @vif: &struct ieee80211_vif pointer from the add_interface callback. + * + * Instructs mac80211 to disconnect from the AP after resume. + * Drivers can use this after WoWLAN if they know that the + * connection cannot be kept up, for example because keys were + * used while the device was asleep but the replay counters or + * similar cannot be retrieved from the device during resume. + * + * Note that due to implementation issues, if the driver uses + * the reconfiguration functionality during resume the interface + * will still be added as associated first during resume and then + * disconnect normally later. + * + * This function can only be called from the resume callback and + * the driver must not be holding any of its own locks while it + * calls this function, or at least not any locks it needs in the + * key configuration paths (if it supports HW crypto). + */ +void ieee80211_resume_disconnect(struct ieee80211_vif *vif); + +/** * ieee80211_disable_dyn_ps - force mac80211 to temporarily disable dynamic psm * * @vif: &struct ieee80211_vif pointer from the add_interface callback. @@ -2916,6 +3153,16 @@ void ieee80211_cqm_rssi_notify(struct ieee80211_vif *vif, gfp_t gfp); /** + * ieee80211_get_operstate - get the operstate of the vif + * + * @vif: &struct ieee80211_vif pointer from the add_interface callback. + * + * The driver might need to know the operstate of the net_device + * (specifically, whether the link is IF_OPER_UP after resume) + */ +unsigned char ieee80211_get_operstate(struct ieee80211_vif *vif); + +/** * ieee80211_chswitch_done - Complete channel switch process * @vif: &struct ieee80211_vif pointer from the add_interface callback. * @success: make the channel switch successful or not @@ -2965,6 +3212,23 @@ void ieee80211_ready_on_channel(struct ieee80211_hw *hw); */ void ieee80211_remain_on_channel_expired(struct ieee80211_hw *hw); +/** + * ieee80211_stop_rx_ba_session - callback to stop existing BA sessions + * + * in order not to harm the system performance and user experience, the device + * may request not to allow any rx ba session and tear down existing rx ba + * sessions based on system constraints such as periodic BT activity that needs + * to limit wlan activity (eg.sco or a2dp)." + * in such cases, the intention is to limit the duration of the rx ppdu and + * therefore prevent the peer device to use a-mpdu aggregation. + * + * @vif: &struct ieee80211_vif pointer from the add_interface callback. + * @ba_rx_bitmap: Bit map of open rx ba per tid + * @addr: & to bssid mac address + */ +void ieee80211_stop_rx_ba_session(struct ieee80211_vif *vif, u16 ba_rx_bitmap, + const u8 *addr); + /* Rate control API */ /** @@ -3150,4 +3414,9 @@ ieee80211_vif_type_p2p(struct ieee80211_vif *vif) return ieee80211_iftype_p2p(vif->type, vif->p2p); } +void ieee80211_enable_rssi_reports(struct ieee80211_vif *vif, + int rssi_min_thold, + int rssi_max_thold); + +void ieee80211_disable_rssi_reports(struct ieee80211_vif *vif); #endif /* MAC80211_H */ |