diff options
Diffstat (limited to 'include/sound/emu10k1.h')
| -rw-r--r-- | include/sound/emu10k1.h | 1544 |
1 files changed, 1544 insertions, 0 deletions
diff --git a/include/sound/emu10k1.h b/include/sound/emu10k1.h new file mode 100644 index 000000000000..43b6786abae5 --- /dev/null +++ b/include/sound/emu10k1.h @@ -0,0 +1,1544 @@ +#ifndef __SOUND_EMU10K1_H +#define __SOUND_EMU10K1_H + +/* + * Copyright (c) by Jaroslav Kysela <perex@suse.cz>, + * Creative Labs, Inc. + * Definitions for EMU10K1 (SB Live!) chips + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#ifdef __KERNEL__ + +#include <sound/pcm.h> +#include <sound/rawmidi.h> +#include <sound/hwdep.h> +#include <sound/ac97_codec.h> +#include <sound/util_mem.h> +#include <sound/pcm-indirect.h> +#include <sound/timer.h> +#include <linux/interrupt.h> +#include <asm/io.h> + +#ifndef PCI_VENDOR_ID_CREATIVE +#define PCI_VENDOR_ID_CREATIVE 0x1102 +#endif +#ifndef PCI_DEVICE_ID_CREATIVE_EMU10K1 +#define PCI_DEVICE_ID_CREATIVE_EMU10K1 0x0002 +#endif + +/* ------------------- DEFINES -------------------- */ + +#define EMUPAGESIZE 4096 +#define MAXREQVOICES 8 +#define MAXPAGES 8192 +#define RESERVED 0 +#define NUM_MIDI 16 +#define NUM_G 64 /* use all channels */ +#define NUM_FXSENDS 4 +#define NUM_EFX_PLAYBACK 16 + +/* FIXME? - according to the OSS driver the EMU10K1 needs a 29 bit DMA mask */ +#define EMU10K1_DMA_MASK 0x7fffffffUL /* 31bit */ +#define AUDIGY_DMA_MASK 0xffffffffUL /* 32bit */ + +#define TMEMSIZE 256*1024 +#define TMEMSIZEREG 4 + +#define IP_TO_CP(ip) ((ip == 0) ? 0 : (((0x00001000uL | (ip & 0x00000FFFL)) << (((ip >> 12) & 0x000FL) + 4)) & 0xFFFF0000uL)) + +// Audigy specify registers are prefixed with 'A_' + +/************************************************************************************************/ +/* PCI function 0 registers, address = <val> + PCIBASE0 */ +/************************************************************************************************/ + +#define PTR 0x00 /* Indexed register set pointer register */ + /* NOTE: The CHANNELNUM and ADDRESS words can */ + /* be modified independently of each other. */ +#define PTR_CHANNELNUM_MASK 0x0000003f /* For each per-channel register, indicates the */ + /* channel number of the register to be */ + /* accessed. For non per-channel registers the */ + /* value should be set to zero. */ +#define PTR_ADDRESS_MASK 0x07ff0000 /* Register index */ +#define A_PTR_ADDRESS_MASK 0x0fff0000 + +#define DATA 0x04 /* Indexed register set data register */ + +#define IPR 0x08 /* Global interrupt pending register */ + /* Clear pending interrupts by writing a 1 to */ + /* the relevant bits and zero to the other bits */ + +#define IPR_GPIOMSG 0x20000000 /* GPIO message interrupt (RE'd, still not sure + which INTE bits enable it) */ + +/* The next two interrupts are for the midi port on the Audigy Drive (A_MPU1) */ +#define IPR_A_MIDITRANSBUFEMPTY2 0x10000000 /* MIDI UART transmit buffer empty */ +#define IPR_A_MIDIRECVBUFEMPTY2 0x08000000 /* MIDI UART receive buffer empty */ + +#define IPR_SPDIFBUFFULL 0x04000000 /* SPDIF capture related, 10k2 only? (RE) */ +#define IPR_SPDIFBUFHALFFULL 0x02000000 /* SPDIF capture related? (RE) */ + +#define IPR_SAMPLERATETRACKER 0x01000000 /* Sample rate tracker lock status change */ +#define IPR_FXDSP 0x00800000 /* Enable FX DSP interrupts */ +#define IPR_FORCEINT 0x00400000 /* Force Sound Blaster interrupt */ +#define IPR_PCIERROR 0x00200000 /* PCI bus error */ +#define IPR_VOLINCR 0x00100000 /* Volume increment button pressed */ +#define IPR_VOLDECR 0x00080000 /* Volume decrement button pressed */ +#define IPR_MUTE 0x00040000 /* Mute button pressed */ +#define IPR_MICBUFFULL 0x00020000 /* Microphone buffer full */ +#define IPR_MICBUFHALFFULL 0x00010000 /* Microphone buffer half full */ +#define IPR_ADCBUFFULL 0x00008000 /* ADC buffer full */ +#define IPR_ADCBUFHALFFULL 0x00004000 /* ADC buffer half full */ +#define IPR_EFXBUFFULL 0x00002000 /* Effects buffer full */ +#define IPR_EFXBUFHALFFULL 0x00001000 /* Effects buffer half full */ +#define IPR_GPSPDIFSTATUSCHANGE 0x00000800 /* GPSPDIF channel status change */ +#define IPR_CDROMSTATUSCHANGE 0x00000400 /* CD-ROM channel status change */ +#define IPR_INTERVALTIMER 0x00000200 /* Interval timer terminal count */ +#define IPR_MIDITRANSBUFEMPTY 0x00000100 /* MIDI UART transmit buffer empty */ +#define IPR_MIDIRECVBUFEMPTY 0x00000080 /* MIDI UART receive buffer empty */ +#define IPR_CHANNELLOOP 0x00000040 /* Channel (half) loop interrupt(s) pending */ +#define IPR_CHANNELNUMBERMASK 0x0000003f /* When IPR_CHANNELLOOP is set, indicates the */ + /* highest set channel in CLIPL, CLIPH, HLIPL, */ + /* or HLIPH. When IP is written with CL set, */ + /* the bit in H/CLIPL or H/CLIPH corresponding */ + /* to the CIN value written will be cleared. */ + +#define INTE 0x0c /* Interrupt enable register */ +#define INTE_VIRTUALSB_MASK 0xc0000000 /* Virtual Soundblaster I/O port capture */ +#define INTE_VIRTUALSB_220 0x00000000 /* Capture at I/O base address 0x220-0x22f */ +#define INTE_VIRTUALSB_240 0x40000000 /* Capture at I/O base address 0x240 */ +#define INTE_VIRTUALSB_260 0x80000000 /* Capture at I/O base address 0x260 */ +#define INTE_VIRTUALSB_280 0xc0000000 /* Capture at I/O base address 0x280 */ +#define INTE_VIRTUALMPU_MASK 0x30000000 /* Virtual MPU I/O port capture */ +#define INTE_VIRTUALMPU_300 0x00000000 /* Capture at I/O base address 0x300-0x301 */ +#define INTE_VIRTUALMPU_310 0x10000000 /* Capture at I/O base address 0x310 */ +#define INTE_VIRTUALMPU_320 0x20000000 /* Capture at I/O base address 0x320 */ +#define INTE_VIRTUALMPU_330 0x30000000 /* Capture at I/O base address 0x330 */ +#define INTE_MASTERDMAENABLE 0x08000000 /* Master DMA emulation at 0x000-0x00f */ +#define INTE_SLAVEDMAENABLE 0x04000000 /* Slave DMA emulation at 0x0c0-0x0df */ +#define INTE_MASTERPICENABLE 0x02000000 /* Master PIC emulation at 0x020-0x021 */ +#define INTE_SLAVEPICENABLE 0x01000000 /* Slave PIC emulation at 0x0a0-0x0a1 */ +#define INTE_VSBENABLE 0x00800000 /* Enable virtual Soundblaster */ +#define INTE_ADLIBENABLE 0x00400000 /* Enable AdLib emulation at 0x388-0x38b */ +#define INTE_MPUENABLE 0x00200000 /* Enable virtual MPU */ +#define INTE_FORCEINT 0x00100000 /* Continuously assert INTAN */ + +#define INTE_MRHANDENABLE 0x00080000 /* Enable the "Mr. Hand" logic */ + /* NOTE: There is no reason to use this under */ + /* Linux, and it will cause odd hardware */ + /* behavior and possibly random segfaults and */ + /* lockups if enabled. */ + +/* The next two interrupts are for the midi port on the Audigy Drive (A_MPU1) */ +#define INTE_A_MIDITXENABLE2 0x00020000 /* Enable MIDI transmit-buffer-empty interrupts */ +#define INTE_A_MIDIRXENABLE2 0x00010000 /* Enable MIDI receive-buffer-empty interrupts */ + + +#define INTE_SAMPLERATETRACKER 0x00002000 /* Enable sample rate tracker interrupts */ + /* NOTE: This bit must always be enabled */ +#define INTE_FXDSPENABLE 0x00001000 /* Enable FX DSP interrupts */ +#define INTE_PCIERRORENABLE 0x00000800 /* Enable PCI bus error interrupts */ +#define INTE_VOLINCRENABLE 0x00000400 /* Enable volume increment button interrupts */ +#define INTE_VOLDECRENABLE 0x00000200 /* Enable volume decrement button interrupts */ +#define INTE_MUTEENABLE 0x00000100 /* Enable mute button interrupts */ +#define INTE_MICBUFENABLE 0x00000080 /* Enable microphone buffer interrupts */ +#define INTE_ADCBUFENABLE 0x00000040 /* Enable ADC buffer interrupts */ +#define INTE_EFXBUFENABLE 0x00000020 /* Enable Effects buffer interrupts */ +#define INTE_GPSPDIFENABLE 0x00000010 /* Enable GPSPDIF status interrupts */ +#define INTE_CDSPDIFENABLE 0x00000008 /* Enable CDSPDIF status interrupts */ +#define INTE_INTERVALTIMERENB 0x00000004 /* Enable interval timer interrupts */ +#define INTE_MIDITXENABLE 0x00000002 /* Enable MIDI transmit-buffer-empty interrupts */ +#define INTE_MIDIRXENABLE 0x00000001 /* Enable MIDI receive-buffer-empty interrupts */ + +#define WC 0x10 /* Wall Clock register */ +#define WC_SAMPLECOUNTER_MASK 0x03FFFFC0 /* Sample periods elapsed since reset */ +#define WC_SAMPLECOUNTER 0x14060010 +#define WC_CURRENTCHANNEL 0x0000003F /* Channel [0..63] currently being serviced */ + /* NOTE: Each channel takes 1/64th of a sample */ + /* period to be serviced. */ + +#define HCFG 0x14 /* Hardware config register */ + /* NOTE: There is no reason to use the legacy */ + /* SoundBlaster emulation stuff described below */ + /* under Linux, and all kinds of weird hardware */ + /* behavior can result if you try. Don't. */ +#define HCFG_LEGACYFUNC_MASK 0xe0000000 /* Legacy function number */ +#define HCFG_LEGACYFUNC_MPU 0x00000000 /* Legacy MPU */ +#define HCFG_LEGACYFUNC_SB 0x40000000 /* Legacy SB */ +#define HCFG_LEGACYFUNC_AD 0x60000000 /* Legacy AD */ +#define HCFG_LEGACYFUNC_MPIC 0x80000000 /* Legacy MPIC */ +#define HCFG_LEGACYFUNC_MDMA 0xa0000000 /* Legacy MDMA */ +#define HCFG_LEGACYFUNC_SPCI 0xc0000000 /* Legacy SPCI */ +#define HCFG_LEGACYFUNC_SDMA 0xe0000000 /* Legacy SDMA */ +#define HCFG_IOCAPTUREADDR 0x1f000000 /* The 4 LSBs of the captured I/O address. */ +#define HCFG_LEGACYWRITE 0x00800000 /* 1 = write, 0 = read */ +#define HCFG_LEGACYWORD 0x00400000 /* 1 = word, 0 = byte */ +#define HCFG_LEGACYINT 0x00200000 /* 1 = legacy event captured. Write 1 to clear. */ + /* NOTE: The rest of the bits in this register */ + /* _are_ relevant under Linux. */ +#define HCFG_CODECFORMAT_MASK 0x00070000 /* CODEC format */ +#define HCFG_CODECFORMAT_AC97 0x00000000 /* AC97 CODEC format -- Primary Output */ +#define HCFG_CODECFORMAT_I2S 0x00010000 /* I2S CODEC format -- Secondary (Rear) Output */ +#define HCFG_GPINPUT0 0x00004000 /* External pin112 */ +#define HCFG_GPINPUT1 0x00002000 /* External pin110 */ +#define HCFG_GPOUTPUT_MASK 0x00001c00 /* External pins which may be controlled */ +#define HCFG_GPOUT0 0x00001000 /* External pin? (spdif enable on 5.1) */ +#define HCFG_GPOUT1 0x00000800 /* External pin? (IR) */ +#define HCFG_GPOUT2 0x00000400 /* External pin? (IR) */ +#define HCFG_JOYENABLE 0x00000200 /* Internal joystick enable */ +#define HCFG_PHASETRACKENABLE 0x00000100 /* Phase tracking enable */ + /* 1 = Force all 3 async digital inputs to use */ + /* the same async sample rate tracker (ZVIDEO) */ +#define HCFG_AC3ENABLE_MASK 0x000000e0 /* AC3 async input control - Not implemented */ +#define HCFG_AC3ENABLE_ZVIDEO 0x00000080 /* Channels 0 and 1 replace ZVIDEO */ +#define HCFG_AC3ENABLE_CDSPDIF 0x00000040 /* Channels 0 and 1 replace CDSPDIF */ +#define HCFG_AC3ENABLE_GPSPDIF 0x00000020 /* Channels 0 and 1 replace GPSPDIF */ +#define HCFG_AUTOMUTE 0x00000010 /* When set, the async sample rate convertors */ + /* will automatically mute their output when */ + /* they are not rate-locked to the external */ + /* async audio source */ +#define HCFG_LOCKSOUNDCACHE 0x00000008 /* 1 = Cancel bustmaster accesses to soundcache */ + /* NOTE: This should generally never be used. */ +#define HCFG_LOCKTANKCACHE_MASK 0x00000004 /* 1 = Cancel bustmaster accesses to tankcache */ + /* NOTE: This should generally never be used. */ +#define HCFG_LOCKTANKCACHE 0x01020014 +#define HCFG_MUTEBUTTONENABLE 0x00000002 /* 1 = Master mute button sets AUDIOENABLE = 0. */ + /* NOTE: This is a 'cheap' way to implement a */ + /* master mute function on the mute button, and */ + /* in general should not be used unless a more */ + /* sophisticated master mute function has not */ + /* been written. */ +#define HCFG_AUDIOENABLE 0x00000001 /* 0 = CODECs transmit zero-valued samples */ + /* Should be set to 1 when the EMU10K1 is */ + /* completely initialized. */ + +//For Audigy, MPU port move to 0x70-0x74 ptr register + +#define MUDATA 0x18 /* MPU401 data register (8 bits) */ + +#define MUCMD 0x19 /* MPU401 command register (8 bits) */ +#define MUCMD_RESET 0xff /* RESET command */ +#define MUCMD_ENTERUARTMODE 0x3f /* Enter_UART_mode command */ + /* NOTE: All other commands are ignored */ + +#define MUSTAT MUCMD /* MPU401 status register (8 bits) */ +#define MUSTAT_IRDYN 0x80 /* 0 = MIDI data or command ACK */ +#define MUSTAT_ORDYN 0x40 /* 0 = MUDATA can accept a command or data */ + +#define A_IOCFG 0x18 /* GPIO on Audigy card (16bits) */ +#define A_GPINPUT_MASK 0xff00 +#define A_GPOUTPUT_MASK 0x00ff + +// Audigy output/GPIO stuff taken from the kX drivers +#define A_IOCFG_GPOUT0 0x0044 /* analog/digital */ +#define A_IOCFG_DISABLE_ANALOG 0x0040 /* = 'enable' for Audigy2 (chiprev=4) */ +#define A_IOCFG_ENABLE_DIGITAL 0x0004 +#define A_IOCFG_UNKNOWN_20 0x0020 +#define A_IOCFG_DISABLE_AC97_FRONT 0x0080 /* turn off ac97 front -> front (10k2.1) */ +#define A_IOCFG_GPOUT1 0x0002 /* IR? drive's internal bypass (?) */ +#define A_IOCFG_GPOUT2 0x0001 /* IR */ +#define A_IOCFG_MULTIPURPOSE_JACK 0x2000 /* center+lfe+rear_center (a2/a2ex) */ + /* + digital for generic 10k2 */ +#define A_IOCFG_DIGITAL_JACK 0x1000 /* digital for a2 platinum */ +#define A_IOCFG_FRONT_JACK 0x4000 +#define A_IOCFG_REAR_JACK 0x8000 +#define A_IOCFG_PHONES_JACK 0x0100 /* LiveDrive */ + +/* outputs: + * for audigy2 platinum: 0xa00 + * for a2 platinum ex: 0x1c00 + * for a1 platinum: 0x0 + */ + +#define TIMER 0x1a /* Timer terminal count register */ + /* NOTE: After the rate is changed, a maximum */ + /* of 1024 sample periods should be allowed */ + /* before the new rate is guaranteed accurate. */ +#define TIMER_RATE_MASK 0x000003ff /* Timer interrupt rate in sample periods */ + /* 0 == 1024 periods, [1..4] are not useful */ +#define TIMER_RATE 0x0a00001a + +#define AC97DATA 0x1c /* AC97 register set data register (16 bit) */ + +#define AC97ADDRESS 0x1e /* AC97 register set address register (8 bit) */ +#define AC97ADDRESS_READY 0x80 /* Read-only bit, reflects CODEC READY signal */ +#define AC97ADDRESS_ADDRESS 0x7f /* Address of indexed AC97 register */ + +/* Available on the Audigy 2 and Audigy 4 only. This is the P16V chip. */ +#define PTR2 0x20 /* Indexed register set pointer register */ +#define DATA2 0x24 /* Indexed register set data register */ +#define IPR2 0x28 /* P16V interrupt pending register */ +#define IPR2_PLAYBACK_CH_0_LOOP 0x00001000 /* Playback Channel 0 loop */ +#define IPR2_PLAYBACK_CH_0_HALF_LOOP 0x00000100 /* Playback Channel 0 half loop */ +#define IPR2_CAPTURE_CH_0_LOOP 0x00100000 /* Capture Channel 0 loop */ +#define IPR2_CAPTURE_CH_0_HALF_LOOP 0x00010000 /* Capture Channel 0 half loop */ + /* 0x00000100 Playback. Only in once per period. + * 0x00110000 Capture. Int on half buffer. + */ +#define INTE2 0x2c /* P16V Interrupt enable register. */ +#define INTE2_PLAYBACK_CH_0_LOOP 0x00001000 /* Playback Channel 0 loop */ +#define INTE2_PLAYBACK_CH_0_HALF_LOOP 0x00000100 /* Playback Channel 0 half loop */ +#define INTE2_PLAYBACK_CH_1_LOOP 0x00002000 /* Playback Channel 1 loop */ +#define INTE2_PLAYBACK_CH_1_HALF_LOOP 0x00000200 /* Playback Channel 1 half loop */ +#define INTE2_PLAYBACK_CH_2_LOOP 0x00004000 /* Playback Channel 2 loop */ +#define INTE2_PLAYBACK_CH_2_HALF_LOOP 0x00000400 /* Playback Channel 2 half loop */ +#define INTE2_PLAYBACK_CH_3_LOOP 0x00008000 /* Playback Channel 3 loop */ +#define INTE2_PLAYBACK_CH_3_HALF_LOOP 0x00000800 /* Playback Channel 3 half loop */ +#define INTE2_CAPTURE_CH_0_LOOP 0x00100000 /* Capture Channel 0 loop */ +#define INTE2_CAPTURE_CH_0_HALF_LOOP 0x00010000 /* Caputre Channel 0 half loop */ +#define HCFG2 0x34 /* Defaults: 0, win2000 sets it to 00004201 */ + /* 0x00000000 2-channel output. */ + /* 0x00000200 8-channel output. */ + /* 0x00000004 pauses stream/irq fail. */ + /* Rest of bits no nothing to sound output */ + /* bit 0: Enable P16V audio. + * bit 1: Lock P16V record memory cache. + * bit 2: Lock P16V playback memory cache. + * bit 3: Dummy record insert zero samples. + * bit 8: Record 8-channel in phase. + * bit 9: Playback 8-channel in phase. + * bit 11-12: Playback mixer attenuation: 0=0dB, 1=-6dB, 2=-12dB, 3=Mute. + * bit 13: Playback mixer enable. + * bit 14: Route SRC48 mixer output to fx engine. + * bit 15: Enable IEEE 1394 chip. + */ +#define IPR3 0x38 /* Cdif interrupt pending register */ +#define INTE3 0x3c /* Cdif interrupt enable register. */ +/************************************************************************************************/ +/* PCI function 1 registers, address = <val> + PCIBASE1 */ +/************************************************************************************************/ + +#define JOYSTICK1 0x00 /* Analog joystick port register */ +#define JOYSTICK2 0x01 /* Analog joystick port register */ +#define JOYSTICK3 0x02 /* Analog joystick port register */ +#define JOYSTICK4 0x03 /* Analog joystick port register */ +#define JOYSTICK5 0x04 /* Analog joystick port register */ +#define JOYSTICK6 0x05 /* Analog joystick port register */ +#define JOYSTICK7 0x06 /* Analog joystick port register */ +#define JOYSTICK8 0x07 /* Analog joystick port register */ + +/* When writing, any write causes JOYSTICK_COMPARATOR output enable to be pulsed on write. */ +/* When reading, use these bitfields: */ +#define JOYSTICK_BUTTONS 0x0f /* Joystick button data */ +#define JOYSTICK_COMPARATOR 0xf0 /* Joystick comparator data */ + + +/********************************************************************************************************/ +/* Emu10k1 pointer-offset register set, accessed through the PTR and DATA registers */ +/********************************************************************************************************/ + +#define CPF 0x00 /* Current pitch and fraction register */ +#define CPF_CURRENTPITCH_MASK 0xffff0000 /* Current pitch (linear, 0x4000 == unity pitch shift) */ +#define CPF_CURRENTPITCH 0x10100000 +#define CPF_STEREO_MASK 0x00008000 /* 1 = Even channel interleave, odd channel locked */ +#define CPF_STOP_MASK 0x00004000 /* 1 = Current pitch forced to 0 */ +#define CPF_FRACADDRESS_MASK 0x00003fff /* Linear fractional address of the current channel */ + +#define PTRX 0x01 /* Pitch target and send A/B amounts register */ +#define PTRX_PITCHTARGET_MASK 0xffff0000 /* Pitch target of specified channel */ +#define PTRX_PITCHTARGET 0x10100001 +#define PTRX_FXSENDAMOUNT_A_MASK 0x0000ff00 /* Linear level of channel output sent to FX send bus A */ +#define PTRX_FXSENDAMOUNT_A 0x08080001 +#define PTRX_FXSENDAMOUNT_B_MASK 0x000000ff /* Linear level of channel output sent to FX send bus B */ +#define PTRX_FXSENDAMOUNT_B 0x08000001 + +#define CVCF 0x02 /* Current volume and filter cutoff register */ +#define CVCF_CURRENTVOL_MASK 0xffff0000 /* Current linear volume of specified channel */ +#define CVCF_CURRENTVOL 0x10100002 +#define CVCF_CURRENTFILTER_MASK 0x0000ffff /* Current filter cutoff frequency of specified channel */ +#define CVCF_CURRENTFILTER 0x10000002 + +#define VTFT 0x03 /* Volume target and filter cutoff target register */ +#define VTFT_VOLUMETARGET_MASK 0xffff0000 /* Volume target of specified channel */ +#define VTFT_VOLUMETARGET 0x10100003 +#define VTFT_FILTERTARGET_MASK 0x0000ffff /* Filter cutoff target of specified channel */ +#define VTFT_FILTERTARGET 0x10000003 + +#define Z1 0x05 /* Filter delay memory 1 register */ + +#define Z2 0x04 /* Filter delay memory 2 register */ + +#define PSST 0x06 /* Send C amount and loop start address register */ +#define PSST_FXSENDAMOUNT_C_MASK 0xff000000 /* Linear level of channel output sent to FX send bus C */ + +#define PSST_FXSENDAMOUNT_C 0x08180006 + +#define PSST_LOOPSTARTADDR_MASK 0x00ffffff /* Loop start address of the specified channel */ +#define PSST_LOOPSTARTADDR 0x18000006 + +#define DSL 0x07 /* Send D amount and loop start address register */ +#define DSL_FXSENDAMOUNT_D_MASK 0xff000000 /* Linear level of channel output sent to FX send bus D */ + +#define DSL_FXSENDAMOUNT_D 0x08180007 + +#define DSL_LOOPENDADDR_MASK 0x00ffffff /* Loop end address of the specified channel */ +#define DSL_LOOPENDADDR 0x18000007 + +#define CCCA 0x08 /* Filter Q, interp. ROM, byte size, cur. addr register */ +#define CCCA_RESONANCE 0xf0000000 /* Lowpass filter resonance (Q) height */ +#define CCCA_INTERPROMMASK 0x0e000000 /* Selects passband of interpolation ROM */ + /* 1 == full band, 7 == lowpass */ + /* ROM 0 is used when pitch shifting downward or less */ + /* then 3 semitones upward. Increasingly higher ROM */ + /* numbers are used, typically in steps of 3 semitones, */ + /* as upward pitch shifting is performed. */ +#define CCCA_INTERPROM_0 0x00000000 /* Select interpolation ROM 0 */ +#define CCCA_INTERPROM_1 0x02000000 /* Select interpolation ROM 1 */ +#define CCCA_INTERPROM_2 0x04000000 /* Select interpolation ROM 2 */ +#define CCCA_INTERPROM_3 0x06000000 /* Select interpolation ROM 3 */ +#define CCCA_INTERPROM_4 0x08000000 /* Select interpolation ROM 4 */ +#define CCCA_INTERPROM_5 0x0a000000 /* Select interpolation ROM 5 */ +#define CCCA_INTERPROM_6 0x0c000000 /* Select interpolation ROM 6 */ +#define CCCA_INTERPROM_7 0x0e000000 /* Select interpolation ROM 7 */ +#define CCCA_8BITSELECT 0x01000000 /* 1 = Sound memory for this channel uses 8-bit samples */ +#define CCCA_CURRADDR_MASK 0x00ffffff /* Current address of the selected channel */ +#define CCCA_CURRADDR 0x18000008 + +#define CCR 0x09 /* Cache control register */ +#define CCR_CACHEINVALIDSIZE 0x07190009 +#define CCR_CACHEINVALIDSIZE_MASK 0xfe000000 /* Number of invalid samples cache for this channel */ +#define CCR_CACHELOOPFLAG 0x01000000 /* 1 = Cache has a loop service pending */ +#define CCR_INTERLEAVEDSAMPLES 0x00800000 /* 1 = A cache service will fetch interleaved samples */ +#define CCR_WORDSIZEDSAMPLES 0x00400000 /* 1 = A cache service will fetch word sized samples */ +#define CCR_READADDRESS 0x06100009 +#define CCR_READADDRESS_MASK 0x003f0000 /* Location of cache just beyond current cache service */ +#define CCR_LOOPINVALSIZE 0x0000fe00 /* Number of invalid samples in cache prior to loop */ + /* NOTE: This is valid only if CACHELOOPFLAG is set */ +#define CCR_LOOPFLAG 0x00000100 /* Set for a single sample period when a loop occurs */ +#define CCR_CACHELOOPADDRHI 0x000000ff /* DSL_LOOPSTARTADDR's hi byte if CACHELOOPFLAG is set */ + +#define CLP 0x0a /* Cache loop register (valid if CCR_CACHELOOPFLAG = 1) */ + /* NOTE: This register is normally not used */ +#define CLP_CACHELOOPADDR 0x0000ffff /* Cache loop address (DSL_LOOPSTARTADDR [0..15]) */ + +#define FXRT 0x0b /* Effects send routing register */ + /* NOTE: It is illegal to assign the same routing to */ + /* two effects sends. */ +#define FXRT_CHANNELA 0x000f0000 /* Effects send bus number for channel's effects send A */ +#define FXRT_CHANNELB 0x00f00000 /* Effects send bus number for channel's effects send B */ +#define FXRT_CHANNELC 0x0f000000 /* Effects send bus number for channel's effects send C */ +#define FXRT_CHANNELD 0xf0000000 /* Effects send bus number for channel's effects send D */ + +#define MAPA 0x0c /* Cache map A */ + +#define MAPB 0x0d /* Cache map B */ + +#define MAP_PTE_MASK 0xffffe000 /* The 19 MSBs of the PTE indexed by the PTI */ +#define MAP_PTI_MASK 0x00001fff /* The 13 bit index to one of the 8192 PTE dwords */ + +#define ENVVOL 0x10 /* Volume envelope register */ +#define ENVVOL_MASK 0x0000ffff /* Current value of volume envelope state variable */ + /* 0x8000-n == 666*n usec delay */ + +#define ATKHLDV 0x11 /* Volume envelope hold and attack register */ +#define ATKHLDV_PHASE0 0x00008000 /* 0 = Begin attack phase */ +#define ATKHLDV_HOLDTIME_MASK 0x00007f00 /* Envelope hold time (127-n == n*88.2msec) */ +#define ATKHLDV_ATTACKTIME_MASK 0x0000007f /* Envelope attack time, log encoded */ + /* 0 = infinite, 1 = 10.9msec, ... 0x7f = 5.5msec */ + +#define DCYSUSV 0x12 /* Volume envelope sustain and decay register */ +#define DCYSUSV_PHASE1_MASK 0x00008000 /* 0 = Begin attack phase, 1 = begin release phase */ +#define DCYSUSV_SUSTAINLEVEL_MASK 0x00007f00 /* 127 = full, 0 = off, 0.75dB increments */ +#define DCYSUSV_CHANNELENABLE_MASK 0x00000080 /* 1 = Inhibit envelope engine from writing values in */ + /* this channel and from writing to pitch, filter and */ + /* volume targets. */ +#define DCYSUSV_DECAYTIME_MASK 0x0000007f /* Volume envelope decay time, log encoded */ + /* 0 = 43.7msec, 1 = 21.8msec, 0x7f = 22msec */ + +#define LFOVAL1 0x13 /* Modulation LFO value */ +#define LFOVAL_MASK 0x0000ffff /* Current value of modulation LFO state variable */ + /* 0x8000-n == 666*n usec delay */ + +#define ENVVAL 0x14 /* Modulation envelope register */ +#define ENVVAL_MASK 0x0000ffff /* Current value of modulation envelope state variable */ + /* 0x8000-n == 666*n usec delay */ + +#define ATKHLDM 0x15 /* Modulation envelope hold and attack register */ +#define ATKHLDM_PHASE0 0x00008000 /* 0 = Begin attack phase */ +#define ATKHLDM_HOLDTIME 0x00007f00 /* Envelope hold time (127-n == n*42msec) */ +#define ATKHLDM_ATTACKTIME 0x0000007f /* Envelope attack time, log encoded */ + /* 0 = infinite, 1 = 11msec, ... 0x7f = 5.5msec */ + +#define DCYSUSM 0x16 /* Modulation envelope decay and sustain register */ +#define DCYSUSM_PHASE1_MASK 0x00008000 /* 0 = Begin attack phase, 1 = begin release phase */ +#define DCYSUSM_SUSTAINLEVEL_MASK 0x00007f00 /* 127 = full, 0 = off, 0.75dB increments */ +#define DCYSUSM_DECAYTIME_MASK 0x0000007f /* Envelope decay time, log encoded */ + /* 0 = 43.7msec, 1 = 21.8msec, 0x7f = 22msec */ + +#define LFOVAL2 0x17 /* Vibrato LFO register */ +#define LFOVAL2_MASK 0x0000ffff /* Current value of vibrato LFO state variable */ + /* 0x8000-n == 666*n usec delay */ + +#define IP 0x18 /* Initial pitch register */ +#define IP_MASK 0x0000ffff /* Exponential initial pitch shift */ + /* 4 bits of octave, 12 bits of fractional octave */ +#define IP_UNITY 0x0000e000 /* Unity pitch shift */ + +#define IFATN 0x19 /* Initial filter cutoff and attenuation register */ +#define IFATN_FILTERCUTOFF_MASK 0x0000ff00 /* Initial filter cutoff frequency in exponential units */ + /* 6 most significant bits are semitones */ + /* 2 least significant bits are fractions */ +#define IFATN_FILTERCUTOFF 0x08080019 +#define IFATN_ATTENUATION_MASK 0x000000ff /* Initial attenuation in 0.375dB steps */ +#define IFATN_ATTENUATION 0x08000019 + + +#define PEFE 0x1a /* Pitch envelope and filter envelope amount register */ +#define PEFE_PITCHAMOUNT_MASK 0x0000ff00 /* Pitch envlope amount */ + /* Signed 2's complement, +/- one octave peak extremes */ +#define PEFE_PITCHAMOUNT 0x0808001a +#define PEFE_FILTERAMOUNT_MASK 0x000000ff /* Filter envlope amount */ + /* Signed 2's complement, +/- six octaves peak extremes */ +#define PEFE_FILTERAMOUNT 0x0800001a +#define FMMOD 0x1b /* Vibrato/filter modulation from LFO register */ +#define FMMOD_MODVIBRATO 0x0000ff00 /* Vibrato LFO modulation depth */ + /* Signed 2's complement, +/- one octave extremes */ +#define FMMOD_MOFILTER 0x000000ff /* Filter LFO modulation depth */ + /* Signed 2's complement, +/- three octave extremes */ + + +#define TREMFRQ 0x1c /* Tremolo amount and modulation LFO frequency register */ +#define TREMFRQ_DEPTH 0x0000ff00 /* Tremolo depth */ + /* Signed 2's complement, with +/- 12dB extremes */ + +#define TREMFRQ_FREQUENCY 0x000000ff /* Tremolo LFO frequency */ + /* ??Hz steps, maximum of ?? Hz. */ +#define FM2FRQ2 0x1d /* Vibrato amount and vibrato LFO frequency register */ +#define FM2FRQ2_DEPTH 0x0000ff00 /* Vibrato LFO vibrato depth */ + /* Signed 2's complement, +/- one octave extremes */ +#define FM2FRQ2_FREQUENCY 0x000000ff /* Vibrato LFO frequency */ + /* 0.039Hz steps, maximum of 9.85 Hz. */ + +#define TEMPENV 0x1e /* Tempory envelope register */ +#define TEMPENV_MASK 0x0000ffff /* 16-bit value */ + /* NOTE: All channels contain internal variables; do */ + /* not write to these locations. */ + +/* 1f something */ + +#define CD0 0x20 /* Cache data 0 register */ +#define CD1 0x21 /* Cache data 1 register */ +#define CD2 0x22 /* Cache data 2 register */ +#define CD3 0x23 /* Cache data 3 register */ +#define CD4 0x24 /* Cache data 4 register */ +#define CD5 0x25 /* Cache data 5 register */ +#define CD6 0x26 /* Cache data 6 register */ +#define CD7 0x27 /* Cache data 7 register */ +#define CD8 0x28 /* Cache data 8 register */ +#define CD9 0x29 /* Cache data 9 register */ +#define CDA 0x2a /* Cache data A register */ +#define CDB 0x2b /* Cache data B register */ +#define CDC 0x2c /* Cache data C register */ +#define CDD 0x2d /* Cache data D register */ +#define CDE 0x2e /* Cache data E register */ +#define CDF 0x2f /* Cache data F register */ + +/* 0x30-3f seem to be the same as 0x20-2f */ + +#define PTB 0x40 /* Page table base register */ +#define PTB_MASK 0xfffff000 /* Physical address of the page table in host memory */ + +#define TCB 0x41 /* Tank cache base register */ +#define TCB_MASK 0xfffff000 /* Physical address of the bottom of host based TRAM */ + +#define ADCCR 0x42 /* ADC sample rate/stereo control register */ +#define ADCCR_RCHANENABLE 0x00000010 /* Enables right channel for writing to the host */ +#define ADCCR_LCHANENABLE 0x00000008 /* Enables left channel for writing to the host */ + /* NOTE: To guarantee phase coherency, both channels */ + /* must be disabled prior to enabling both channels. */ +#define A_ADCCR_RCHANENABLE 0x00000020 +#define A_ADCCR_LCHANENABLE 0x00000010 + +#define A_ADCCR_SAMPLERATE_MASK 0x0000000F /* Audigy sample rate convertor output rate */ +#define ADCCR_SAMPLERATE_MASK 0x00000007 /* Sample rate convertor output rate */ +#define ADCCR_SAMPLERATE_48 0x00000000 /* 48kHz sample rate */ +#define ADCCR_SAMPLERATE_44 0x00000001 /* 44.1kHz sample rate */ +#define ADCCR_SAMPLERATE_32 0x00000002 /* 32kHz sample rate */ +#define ADCCR_SAMPLERATE_24 0x00000003 /* 24kHz sample rate */ +#define ADCCR_SAMPLERATE_22 0x00000004 /* 22.05kHz sample rate */ +#define ADCCR_SAMPLERATE_16 0x00000005 /* 16kHz sample rate */ +#define ADCCR_SAMPLERATE_11 0x00000006 /* 11.025kHz sample rate */ +#define ADCCR_SAMPLERATE_8 0x00000007 /* 8kHz sample rate */ +#define A_ADCCR_SAMPLERATE_12 0x00000006 /* 12kHz sample rate */ +#define A_ADCCR_SAMPLERATE_11 0x00000007 /* 11.025kHz sample rate */ +#define A_ADCCR_SAMPLERATE_8 0x00000008 /* 8kHz sample rate */ + +#define FXWC 0x43 /* FX output write channels register */ + /* When set, each bit enables the writing of the */ + /* corresponding FX output channel (internal registers */ + /* 0x20-0x3f) to host memory. This mode of recording */ + /* is 16bit, 48KHz only. All 32 channels can be enabled */ + /* simultaneously. */ + +#define FXWC_DEFAULTROUTE_C (1<<0) /* left emu out? */ +#define FXWC_DEFAULTROUTE_B (1<<1) /* right emu out? */ +#define FXWC_DEFAULTROUTE_A (1<<12) +#define FXWC_DEFAULTROUTE_D (1<<13) +#define FXWC_ADCLEFT (1<<18) +#define FXWC_CDROMSPDIFLEFT (1<<18) +#define FXWC_ADCRIGHT (1<<19) +#define FXWC_CDROMSPDIFRIGHT (1<<19) +#define FXWC_MIC (1<<20) +#define FXWC_ZOOMLEFT (1<<20) +#define FXWC_ZOOMRIGHT (1<<21) +#define FXWC_SPDIFLEFT (1<<22) /* 0x00400000 */ +#define FXWC_SPDIFRIGHT (1<<23) /* 0x00800000 */ + +#define TCBS 0x44 /* Tank cache buffer size register */ +#define TCBS_MASK 0x00000007 /* Tank cache buffer size field */ +#define TCBS_BUFFSIZE_16K 0x00000000 +#define TCBS_BUFFSIZE_32K 0x00000001 +#define TCBS_BUFFSIZE_64K 0x00000002 +#define TCBS_BUFFSIZE_128K 0x00000003 +#define TCBS_BUFFSIZE_256K 0x00000004 +#define TCBS_BUFFSIZE_512K 0x00000005 +#define TCBS_BUFFSIZE_1024K 0x00000006 +#define TCBS_BUFFSIZE_2048K 0x00000007 + +#define MICBA 0x45 /* AC97 microphone buffer address register */ +#define MICBA_MASK 0xfffff000 /* 20 bit base address */ + +#define ADCBA 0x46 /* ADC buffer address register */ +#define ADCBA_MASK 0xfffff000 /* 20 bit base address */ + +#define FXBA 0x47 /* FX Buffer Address */ +#define FXBA_MASK 0xfffff000 /* 20 bit base address */ + +/* 0x48 something - word access, defaults to 3f */ + +#define MICBS 0x49 /* Microphone buffer size register */ + +#define ADCBS 0x4a /* ADC buffer size register */ + +#define FXBS 0x4b /* FX buffer size register */ + +/* register: 0x4c..4f: ffff-ffff current amounts, per-channel */ + +/* The following mask values define the size of the ADC, MIX and FX buffers in bytes */ +#define ADCBS_BUFSIZE_NONE 0x00000000 +#define ADCBS_BUFSIZE_384 0x00000001 +#define ADCBS_BUFSIZE_448 0x00000002 +#define ADCBS_BUFSIZE_512 0x00000003 +#define ADCBS_BUFSIZE_640 0x00000004 +#define ADCBS_BUFSIZE_768 0x00000005 +#define ADCBS_BUFSIZE_896 0x00000006 +#define ADCBS_BUFSIZE_1024 0x00000007 +#define ADCBS_BUFSIZE_1280 0x00000008 +#define ADCBS_BUFSIZE_1536 0x00000009 +#define ADCBS_BUFSIZE_1792 0x0000000a +#define ADCBS_BUFSIZE_2048 0x0000000b +#define ADCBS_BUFSIZE_2560 0x0000000c +#define ADCBS_BUFSIZE_3072 0x0000000d +#define ADCBS_BUFSIZE_3584 0x0000000e +#define ADCBS_BUFSIZE_4096 0x0000000f +#define ADCBS_BUFSIZE_5120 0x00000010 +#define ADCBS_BUFSIZE_6144 0x00000011 +#define ADCBS_BUFSIZE_7168 0x00000012 +#define ADCBS_BUFSIZE_8192 0x00000013 +#define ADCBS_BUFSIZE_10240 0x00000014 +#define ADCBS_BUFSIZE_12288 0x00000015 +#define ADCBS_BUFSIZE_14366 0x00000016 +#define ADCBS_BUFSIZE_16384 0x00000017 +#define ADCBS_BUFSIZE_20480 0x00000018 +#define ADCBS_BUFSIZE_24576 0x00000019 +#define ADCBS_BUFSIZE_28672 0x0000001a +#define ADCBS_BUFSIZE_32768 0x0000001b +#define ADCBS_BUFSIZE_40960 0x0000001c +#define ADCBS_BUFSIZE_49152 0x0000001d +#define ADCBS_BUFSIZE_57344 0x0000001e +#define ADCBS_BUFSIZE_65536 0x0000001f + + +#define CDCS 0x50 /* CD-ROM digital channel status register */ + +#define GPSCS 0x51 /* General Purpose SPDIF channel status register*/ + +#define DBG 0x52 /* DO NOT PROGRAM THIS REGISTER!!! MAY DESTROY CHIP */ + +#define REG53 0x53 /* DO NOT PROGRAM THIS REGISTER!!! MAY DESTROY CHIP */ + +#define A_DBG 0x53 +#define A_DBG_SINGLE_STEP 0x00020000 /* Set to zero to start dsp */ +#define A_DBG_ZC 0x40000000 /* zero tram counter */ +#define A_DBG_STEP_ADDR 0x000003ff +#define A_DBG_SATURATION_OCCURED 0x20000000 +#define A_DBG_SATURATION_ADDR 0x0ffc0000 + +// NOTE: 0x54,55,56: 64-bit +#define SPCS0 0x54 /* SPDIF output Channel Status 0 register */ + +#define SPCS1 0x55 /* SPDIF output Channel Status 1 register */ + +#define SPCS2 0x56 /* SPDIF output Channel Status 2 register */ + +#define SPCS_CLKACCYMASK 0x30000000 /* Clock accuracy */ +#define SPCS_CLKACCY_1000PPM 0x00000000 /* 1000 parts per million */ +#define SPCS_CLKACCY_50PPM 0x10000000 /* 50 parts per million */ +#define SPCS_CLKACCY_VARIABLE 0x20000000 /* Variable accuracy */ +#define SPCS_SAMPLERATEMASK 0x0f000000 /* Sample rate */ +#define SPCS_SAMPLERATE_44 0x00000000 /* 44.1kHz sample rate */ +#define SPCS_SAMPLERATE_48 0x02000000 /* 48kHz sample rate */ +#define SPCS_SAMPLERATE_32 0x03000000 /* 32kHz sample rate */ +#define SPCS_CHANNELNUMMASK 0x00f00000 /* Channel number */ +#define SPCS_CHANNELNUM_UNSPEC 0x00000000 /* Unspecified channel number */ +#define SPCS_CHANNELNUM_LEFT 0x00100000 /* Left channel */ +#define SPCS_CHANNELNUM_RIGHT 0x00200000 /* Right channel */ +#define SPCS_SOURCENUMMASK 0x000f0000 /* Source number */ +#define SPCS_SOURCENUM_UNSPEC 0x00000000 /* Unspecified source number */ +#define SPCS_GENERATIONSTATUS 0x00008000 /* Originality flag (see IEC-958 spec) */ +#define SPCS_CATEGORYCODEMASK 0x00007f00 /* Category code (see IEC-958 spec) */ +#define SPCS_MODEMASK 0x000000c0 /* Mode (see IEC-958 spec) */ +#define SPCS_EMPHASISMASK 0x00000038 /* Emphasis */ +#define SPCS_EMPHASIS_NONE 0x00000000 /* No emphasis */ +#define SPCS_EMPHASIS_50_15 0x00000008 /* 50/15 usec 2 channel */ +#define SPCS_COPYRIGHT 0x00000004 /* Copyright asserted flag -- do not modify */ +#define SPCS_NOTAUDIODATA 0x00000002 /* 0 = Digital audio, 1 = not audio */ +#define SPCS_PROFESSIONAL 0x00000001 /* 0 = Consumer (IEC-958), 1 = pro (AES3-1992) */ + +/* The 32-bit CLIx and SOLx registers all have one bit per channel control/status */ +#define CLIEL 0x58 /* Channel loop interrupt enable low register */ + +#define CLIEH 0x59 /* Channel loop interrupt enable high register */ + +#define CLIPL 0x5a /* Channel loop interrupt pending low register */ + +#define CLIPH 0x5b /* Channel loop interrupt pending high register */ + +#define SOLEL 0x5c /* Stop on loop enable low register */ + +#define SOLEH 0x5d /* Stop on loop enable high register */ + +#define SPBYPASS 0x5e /* SPDIF BYPASS mode register */ +#define SPBYPASS_SPDIF0_MASK 0x00000003 /* SPDIF 0 bypass mode */ +#define SPBYPASS_SPDIF1_MASK 0x0000000c /* SPDIF 1 bypass mode */ +/* bypass mode: 0 - DSP; 1 - SPDIF A, 2 - SPDIF B, 3 - SPDIF C */ +#define SPBYPASS_FORMAT 0x00000f00 /* If 1, SPDIF XX uses 24 bit, if 0 - 20 bit */ + +#define AC97SLOT 0x5f /* additional AC97 slots enable bits */ +#define AC97SLOT_REAR_RIGHT 0x01 /* Rear left */ +#define AC97SLOT_REAR_LEFT 0x02 /* Rear right */ +#define AC97SLOT_CNTR 0x10 /* Center enable */ +#define AC97SLOT_LFE 0x20 /* LFE enable */ + +// NOTE: 0x60,61,62: 64-bit +#define CDSRCS 0x60 /* CD-ROM Sample Rate Converter status register */ + +#define GPSRCS 0x61 /* General Purpose SPDIF sample rate cvt status */ + +#define ZVSRCS 0x62 /* ZVideo sample rate converter status */ + /* NOTE: This one has no SPDIFLOCKED field */ + /* Assumes sample lock */ + +/* These three bitfields apply to CDSRCS, GPSRCS, and (except as noted) ZVSRCS. */ +#define SRCS_SPDIFLOCKED 0x02000000 /* SPDIF stream locked */ +#define SRCS_RATELOCKED 0x01000000 /* Sample rate locked */ +#define SRCS_ESTSAMPLERATE 0x0007ffff /* Do not modify this field. */ + +/* Note that these values can vary +/- by a small amount */ +#define SRCS_SPDIFRATE_44 0x0003acd9 +#define SRCS_SPDIFRATE_48 0x00040000 +#define SRCS_SPDIFRATE_96 0x00080000 + +#define MICIDX 0x63 /* Microphone recording buffer index register */ +#define MICIDX_MASK 0x0000ffff /* 16-bit value */ +#define MICIDX_IDX 0x10000063 + +#define ADCIDX 0x64 /* ADC recording buffer index register */ +#define ADCIDX_MASK 0x0000ffff /* 16 bit index field */ +#define ADCIDX_IDX 0x10000064 + +#define A_ADCIDX 0x63 +#define A_ADCIDX_IDX 0x10000063 + +#define A_MICIDX 0x64 +#define A_MICIDX_IDX 0x10000064 + +#define FXIDX 0x65 /* FX recording buffer index register */ +#define FXIDX_MASK 0x0000ffff /* 16-bit value */ +#define FXIDX_IDX 0x10000065 + +/* The 32-bit HLIx and HLIPx registers all have one bit per channel control/status */ +#define HLIEL 0x66 /* Channel half loop interrupt enable low register */ + +#define HLIEH 0x67 /* Channel half loop interrupt enable high register */ + +#define HLIPL 0x68 /* Channel half loop interrupt pending low register */ + +#define HLIPH 0x69 /* Channel half loop interrupt pending high register */ + +// 0x6a,6b,6c used for some recording +// 0x6d unused +// 0x6e,6f - tanktable base / offset + +/* This is the MPU port on the card (via the game port) */ +#define A_MUDATA1 0x70 +#define A_MUCMD1 0x71 +#define A_MUSTAT1 A_MUCMD1 + +/* This is the MPU port on the Audigy Drive */ +#define A_MUDATA2 0x72 +#define A_MUCMD2 0x73 +#define A_MUSTAT2 A_MUCMD2 + +/* The next two are the Audigy equivalent of FXWC */ +/* the Audigy can record any output (16bit, 48kHz, up to 64 channel simultaneously) */ +/* Each bit selects a channel for recording */ +#define A_FXWC1 0x74 /* Selects 0x7f-0x60 for FX recording */ +#define A_FXWC2 0x75 /* Selects 0x9f-0x80 for FX recording */ + +#define A_SPDIF_SAMPLERATE 0x76 /* Set the sample rate of SPDIF output */ +#define A_SPDIF_RATE_MASK 0x000000c0 +#define A_SPDIF_48000 0x00000000 +#define A_SPDIF_44100 0x00000080 +#define A_SPDIF_96000 0x00000040 + +/* 0x77,0x78,0x79 "something i2s-related" - default to 0x01080000 on my audigy 2 ZS --rlrevell */ +/* 0x7a, 0x7b - lookup tables */ + +#define A_FXRT2 0x7c +#define A_FXRT_CHANNELE 0x0000003f /* Effects send bus number for channel's effects send E */ +#define A_FXRT_CHANNELF 0x00003f00 /* Effects send bus number for channel's effects send F */ +#define A_FXRT_CHANNELG 0x003f0000 /* Effects send bus number for channel's effects send G */ +#define A_FXRT_CHANNELH 0x3f000000 /* Effects send bus number for channel's effects send H */ + +#define A_SENDAMOUNTS 0x7d +#define A_FXSENDAMOUNT_E_MASK 0xFF000000 +#define A_FXSENDAMOUNT_F_MASK 0x00FF0000 +#define A_FXSENDAMOUNT_G_MASK 0x0000FF00 +#define A_FXSENDAMOUNT_H_MASK 0x000000FF +/* 0x7c, 0x7e "high bit is used for filtering" */ + +/* The send amounts for this one are the same as used with the emu10k1 */ +#define A_FXRT1 0x7e +#define A_FXRT_CHANNELA 0x0000003f +#define A_FXRT_CHANNELB 0x00003f00 +#define A_FXRT_CHANNELC 0x003f0000 +#define A_FXRT_CHANNELD 0x3f000000 + + +/* Each FX general purpose register is 32 bits in length, all bits are used */ +#define FXGPREGBASE 0x100 /* FX general purpose registers base */ +#define A_FXGPREGBASE 0x400 /* Audigy GPRs, 0x400 to 0x5ff */ + +#define A_TANKMEMCTLREGBASE 0x100 /* Tank memory control registers base - only for Audigy */ +#define A_TANKMEMCTLREG_MASK 0x1f /* only 5 bits used - only for Audigy */ + +/* Tank audio data is logarithmically compressed down to 16 bits before writing to TRAM and is */ +/* decompressed back to 20 bits on a read. There are a total of 160 locations, the last 32 */ +/* locations are for external TRAM. */ +#define TANKMEMDATAREGBASE 0x200 /* Tank memory data registers base */ +#define TANKMEMDATAREG_MASK 0x000fffff /* 20 bit tank audio data field */ + +/* Combined address field and memory opcode or flag field. 160 locations, last 32 are external */ +#define TANKMEMADDRREGBASE 0x300 /* Tank memory address registers base */ +#define TANKMEMADDRREG_ADDR_MASK 0x000fffff /* 20 bit tank address field */ +#define TANKMEMADDRREG_CLEAR 0x00800000 /* Clear tank memory */ +#define TANKMEMADDRREG_ALIGN 0x00400000 /* Align read or write relative to tank access */ +#define TANKMEMADDRREG_WRITE 0x00200000 /* Write to tank memory */ +#define TANKMEMADDRREG_READ 0x00100000 /* Read from tank memory */ + +#define MICROCODEBASE 0x400 /* Microcode data base address */ + +/* Each DSP microcode instruction is mapped into 2 doublewords */ +/* NOTE: When writing, always write the LO doubleword first. Reads can be in either order. */ +#define LOWORD_OPX_MASK 0x000ffc00 /* Instruction operand X */ +#define LOWORD_OPY_MASK 0x000003ff /* Instruction operand Y */ +#define HIWORD_OPCODE_MASK 0x00f00000 /* Instruction opcode */ +#define HIWORD_RESULT_MASK 0x000ffc00 /* Instruction result */ +#define HIWORD_OPA_MASK 0x000003ff /* Instruction operand A */ + + +/* Audigy Soundcard have a different instruction format */ +#define A_MICROCODEBASE 0x600 +#define A_LOWORD_OPY_MASK 0x000007ff +#define A_LOWORD_OPX_MASK 0x007ff000 +#define A_HIWORD_OPCODE_MASK 0x0f000000 +#define A_HIWORD_RESULT_MASK 0x007ff000 +#define A_HIWORD_OPA_MASK 0x000007ff + + +/* ------------------- STRUCTURES -------------------- */ + +typedef struct _snd_emu10k1 emu10k1_t; +typedef struct _snd_emu10k1_voice emu10k1_voice_t; +typedef struct _snd_emu10k1_pcm emu10k1_pcm_t; + +typedef enum { + EMU10K1_EFX, + EMU10K1_PCM, + EMU10K1_SYNTH, + EMU10K1_MIDI +} emu10k1_voice_type_t; + +struct _snd_emu10k1_voice { + emu10k1_t *emu; + int number; + unsigned int use: 1, + pcm: 1, + efx: 1, + synth: 1, + midi: 1; + void (*interrupt)(emu10k1_t *emu, emu10k1_voice_t *pvoice); + + emu10k1_pcm_t *epcm; +}; + +typedef enum { + PLAYBACK_EMUVOICE, + PLAYBACK_EFX, + CAPTURE_AC97ADC, + CAPTURE_AC97MIC, + CAPTURE_EFX +} snd_emu10k1_pcm_type_t; + +struct _snd_emu10k1_pcm { + emu10k1_t *emu; + snd_emu10k1_pcm_type_t type; + snd_pcm_substream_t *substream; + emu10k1_voice_t *voices[NUM_EFX_PLAYBACK]; + emu10k1_voice_t *extra; + unsigned short running; + unsigned short first_ptr; + snd_util_memblk_t *memblk; + unsigned int start_addr; + unsigned int ccca_start_addr; + unsigned int capture_ipr; /* interrupt acknowledge mask */ + unsigned int capture_inte; /* interrupt enable mask */ + unsigned int capture_ba_reg; /* buffer address register */ + unsigned int capture_bs_reg; /* buffer size register */ + unsigned int capture_idx_reg; /* buffer index register */ + unsigned int capture_cr_val; /* control value */ + unsigned int capture_cr_val2; /* control value2 (for audigy) */ + unsigned int capture_bs_val; /* buffer size value */ + unsigned int capture_bufsize; /* buffer size in bytes */ +}; + +typedef struct { + /* mono, left, right x 8 sends (4 on emu10k1) */ + unsigned char send_routing[3][8]; + unsigned char send_volume[3][8]; + unsigned short attn[3]; + emu10k1_pcm_t *epcm; +} emu10k1_pcm_mixer_t; + +#define snd_emu10k1_compose_send_routing(route) \ +((route[0] | (route[1] << 4) | (route[2] << 8) | (route[3] << 12)) << 16) + +#define snd_emu10k1_compose_audigy_fxrt1(route) \ +((unsigned int)route[0] | ((unsigned int)route[1] << 8) | ((unsigned int)route[2] << 16) | ((unsigned int)route[3] << 24)) + +#define snd_emu10k1_compose_audigy_fxrt2(route) \ +((unsigned int)route[4] | ((unsigned int)route[5] << 8) | ((unsigned int)route[6] << 16) | ((unsigned int)route[7] << 24)) + +typedef struct snd_emu10k1_memblk { + snd_util_memblk_t mem; + /* private part */ + int first_page, last_page, pages, mapped_page; + unsigned int map_locked; + struct list_head mapped_link; + struct list_head mapped_order_link; +} emu10k1_memblk_t; + +#define snd_emu10k1_memblk_offset(blk) (((blk)->mapped_page << PAGE_SHIFT) | ((blk)->mem.offset & (PAGE_SIZE - 1))) + +#define EMU10K1_MAX_TRAM_BLOCKS_PER_CODE 16 + +typedef struct { + struct list_head list; /* list link container */ + unsigned int vcount; + unsigned int count; /* count of GPR (1..16) */ + unsigned short gpr[32]; /* GPR number(s) */ + unsigned int value[32]; + unsigned int min; /* minimum range */ + unsigned int max; /* maximum range */ + unsigned int translation; /* translation type (EMU10K1_GPR_TRANSLATION*) */ + snd_kcontrol_t *kcontrol; +} snd_emu10k1_fx8010_ctl_t; + +typedef void (snd_fx8010_irq_handler_t)(emu10k1_t *emu, void *private_data); + +typedef struct _snd_emu10k1_fx8010_irq { + struct _snd_emu10k1_fx8010_irq *next; + snd_fx8010_irq_handler_t *handler; + unsigned short gpr_running; + void *private_data; +} snd_emu10k1_fx8010_irq_t; + +typedef struct { + unsigned int valid: 1, + opened: 1, + active: 1; + unsigned int channels; /* 16-bit channels count */ + unsigned int tram_start; /* initial ring buffer position in TRAM (in samples) */ + unsigned int buffer_size; /* count of buffered samples */ + unsigned short gpr_size; /* GPR containing size of ring buffer in samples (host) */ + unsigned short gpr_ptr; /* GPR containing current pointer in the ring buffer (host = reset, FX8010) */ + unsigned short gpr_count; /* GPR containing count of samples between two interrupts (host) */ + unsigned short gpr_tmpcount; /* GPR containing current count of samples to interrupt (host = set, FX8010) */ + unsigned short gpr_trigger; /* GPR containing trigger (activate) information (host) */ + unsigned short gpr_running; /* GPR containing info if PCM is running (FX8010) */ + unsigned char etram[32]; /* external TRAM address & data */ + snd_pcm_indirect_t pcm_rec; + unsigned int tram_pos; + unsigned int tram_shift; + snd_emu10k1_fx8010_irq_t *irq; +} snd_emu10k1_fx8010_pcm_t; + +typedef struct { + unsigned short fxbus_mask; /* used FX buses (bitmask) */ + unsigned short extin_mask; /* used external inputs (bitmask) */ + unsigned short extout_mask; /* used external outputs (bitmask) */ + unsigned short pad1; + unsigned int itram_size; /* internal TRAM size in samples */ + struct snd_dma_buffer etram_pages; /* external TRAM pages and size */ + unsigned int dbg; /* FX debugger register */ + unsigned char name[128]; + int gpr_size; /* size of allocated GPR controls */ + int gpr_count; /* count of used kcontrols */ + struct list_head gpr_ctl; /* GPR controls */ + struct semaphore lock; + snd_emu10k1_fx8010_pcm_t pcm[8]; + spinlock_t irq_lock; + snd_emu10k1_fx8010_irq_t *irq_handlers; +} snd_emu10k1_fx8010_t; + +#define emu10k1_gpr_ctl(n) list_entry(n, snd_emu10k1_fx8010_ctl_t, list) + +typedef struct { + struct _snd_emu10k1 *emu; + snd_rawmidi_t *rmidi; + snd_rawmidi_substream_t *substream_input; + snd_rawmidi_substream_t *substream_output; + unsigned int midi_mode; + spinlock_t input_lock; + spinlock_t output_lock; + spinlock_t open_lock; + int tx_enable, rx_enable; + int port; + int ipr_tx, ipr_rx; + void (*interrupt)(emu10k1_t *emu, unsigned int status); +} emu10k1_midi_t; + +typedef struct { + u32 vendor; + u32 device; + u32 subsystem; + unsigned char emu10k1_chip; /* Original SB Live. Not SB Live 24bit. */ + unsigned char emu10k2_chip; /* Audigy 1 or Audigy 2. */ + unsigned char ca0102_chip; /* Audigy 1 or Audigy 2. Not SB Audigy 2 Value. */ + unsigned char ca0108_chip; /* Audigy 2 Value */ + unsigned char ca0151_chip; /* P16V */ + unsigned char spk71; /* Has 7.1 speakers */ + unsigned char spdif_bug; /* Has Spdif phasing bug */ + unsigned char ac97_chip; /* Has an AC97 chip */ + unsigned char ecard; /* APS EEPROM */ + char * driver; + char * name; +} emu_chip_details_t; + +struct _snd_emu10k1 { + int irq; + + unsigned long port; /* I/O port number */ + unsigned int APS: 1, /* APS flag */ + no_ac97: 1, /* no AC'97 */ + tos_link: 1, /* tos link detected */ + rear_ac97: 1, /* rear channels are on AC'97 */ + spk71:1; /* 7.1 configuration (Audigy 2 ZS) */ + const emu_chip_details_t *card_capabilities; /* Contains profile of card capabilities */ + unsigned int audigy; /* is Audigy? */ + unsigned int revision; /* chip revision */ + unsigned int serial; /* serial number */ + unsigned short model; /* subsystem id */ + unsigned int card_type; /* EMU10K1_CARD_* */ + unsigned int ecard_ctrl; /* ecard control bits */ + unsigned long dma_mask; /* PCI DMA mask */ + int max_cache_pages; /* max memory size / PAGE_SIZE */ + struct snd_dma_buffer silent_page; /* silent page */ + struct snd_dma_buffer ptb_pages; /* page table pages */ + struct snd_dma_device p16v_dma_dev; + struct snd_dma_buffer p16v_buffer; + + snd_util_memhdr_t *memhdr; /* page allocation list */ + emu10k1_memblk_t *reserved_page; /* reserved page */ + + struct list_head mapped_link_head; + struct list_head mapped_order_link_head; + void **page_ptr_table; + unsigned long *page_addr_table; + spinlock_t memblk_lock; + + unsigned int spdif_bits[3]; /* s/pdif out setup */ + + snd_emu10k1_fx8010_t fx8010; /* FX8010 info */ + int gpr_base; + + ac97_t *ac97; + + struct pci_dev *pci; + snd_card_t *card; + snd_pcm_t *pcm; + snd_pcm_t *pcm_mic; + snd_pcm_t *pcm_efx; + snd_pcm_t *pcm_p16v; + + spinlock_t synth_lock; + void *synth; + int (*get_synth_voice)(emu10k1_t *emu); + + spinlock_t reg_lock; + spinlock_t emu_lock; + spinlock_t voice_lock; + struct semaphore ptb_lock; + + emu10k1_voice_t voices[NUM_G]; + emu10k1_voice_t p16v_voices[4]; + int p16v_device_offset; + emu10k1_pcm_mixer_t pcm_mixer[32]; + emu10k1_pcm_mixer_t efx_pcm_mixer[NUM_EFX_PLAYBACK]; + snd_kcontrol_t *ctl_send_routing; + snd_kcontrol_t *ctl_send_volume; + snd_kcontrol_t *ctl_attn; + snd_kcontrol_t *ctl_efx_send_routing; + snd_kcontrol_t *ctl_efx_send_volume; + snd_kcontrol_t *ctl_efx_attn; + + void (*hwvol_interrupt)(emu10k1_t *emu, unsigned int status); + void (*capture_interrupt)(emu10k1_t *emu, unsigned int status); + void (*capture_mic_interrupt)(emu10k1_t *emu, unsigned int status); + void (*capture_efx_interrupt)(emu10k1_t *emu, unsigned int status); + void (*spdif_interrupt)(emu10k1_t *emu, unsigned int status); + void (*dsp_interrupt)(emu10k1_t *emu); + + snd_pcm_substream_t *pcm_capture_substream; + snd_pcm_substream_t *pcm_capture_mic_substream; + snd_pcm_substream_t *pcm_capture_efx_substream; + snd_pcm_substream_t *pcm_playback_efx_substream; + + snd_timer_t *timer; + + emu10k1_midi_t midi; + emu10k1_midi_t midi2; /* for audigy */ + + unsigned int efx_voices_mask[2]; + unsigned int next_free_voice; +}; + +int snd_emu10k1_create(snd_card_t * card, + struct pci_dev *pci, + unsigned short extin_mask, + unsigned short extout_mask, + long max_cache_bytes, + int enable_ir, + emu10k1_t ** remu); + +int snd_emu10k1_pcm(emu10k1_t * emu, int device, snd_pcm_t ** rpcm); +int snd_emu10k1_pcm_mic(emu10k1_t * emu, int device, snd_pcm_t ** rpcm); +int snd_emu10k1_pcm_efx(emu10k1_t * emu, int device, snd_pcm_t ** rpcm); +int snd_p16v_pcm(emu10k1_t * emu, int device, snd_pcm_t ** rpcm); +int snd_p16v_free(emu10k1_t * emu); +int snd_p16v_mixer(emu10k1_t * emu); +int snd_emu10k1_pcm_multi(emu10k1_t * emu, int device, snd_pcm_t ** rpcm); +int snd_emu10k1_fx8010_pcm(emu10k1_t * emu, int device, snd_pcm_t ** rpcm); +int snd_emu10k1_mixer(emu10k1_t * emu); +int snd_emu10k1_timer(emu10k1_t * emu, int device); +int snd_emu10k1_fx8010_new(emu10k1_t *emu, int device, snd_hwdep_t ** rhwdep); + +irqreturn_t snd_emu10k1_interrupt(int irq, void *dev_id, struct pt_regs *regs); + +/* initialization */ +void snd_emu10k1_voice_init(emu10k1_t * emu, int voice); +int snd_emu10k1_init_efx(emu10k1_t *emu); +void snd_emu10k1_free_efx(emu10k1_t *emu); +int snd_emu10k1_fx8010_tram_setup(emu10k1_t *emu, u32 size); + +/* I/O functions */ +unsigned int snd_emu10k1_ptr_read(emu10k1_t * emu, unsigned int reg, unsigned int chn); +void snd_emu10k1_ptr_write(emu10k1_t *emu, unsigned int reg, unsigned int chn, unsigned int data); +unsigned int snd_emu10k1_ptr20_read(emu10k1_t * emu, unsigned int reg, unsigned int chn); +void snd_emu10k1_ptr20_write(emu10k1_t *emu, unsigned int reg, unsigned int chn, unsigned int data); +unsigned int snd_emu10k1_efx_read(emu10k1_t *emu, unsigned int pc); +void snd_emu10k1_intr_enable(emu10k1_t *emu, unsigned int intrenb); +void snd_emu10k1_intr_disable(emu10k1_t *emu, unsigned int intrenb); +void snd_emu10k1_voice_intr_enable(emu10k1_t *emu, unsigned int voicenum); +void snd_emu10k1_voice_intr_disable(emu10k1_t *emu, unsigned int voicenum); +void snd_emu10k1_voice_intr_ack(emu10k1_t *emu, unsigned int voicenum); +void snd_emu10k1_voice_half_loop_intr_enable(emu10k1_t *emu, unsigned int voicenum); +void snd_emu10k1_voice_half_loop_intr_disable(emu10k1_t *emu, unsigned int voicenum); +void snd_emu10k1_voice_half_loop_intr_ack(emu10k1_t *emu, unsigned int voicenum); +void snd_emu10k1_voice_set_loop_stop(emu10k1_t *emu, unsigned int voicenum); +void snd_emu10k1_voice_clear_loop_stop(emu10k1_t *emu, unsigned int voicenum); +void snd_emu10k1_wait(emu10k1_t *emu, unsigned int wait); +static inline unsigned int snd_emu10k1_wc(emu10k1_t *emu) { return (inl(emu->port + WC) >> 6) & 0xfffff; } +unsigned short snd_emu10k1_ac97_read(ac97_t *ac97, unsigned short reg); +void snd_emu10k1_ac97_write(ac97_t *ac97, unsigned short reg, unsigned short data); +unsigned int snd_emu10k1_rate_to_pitch(unsigned int rate); + +/* memory allocation */ +snd_util_memblk_t *snd_emu10k1_alloc_pages(emu10k1_t *emu, snd_pcm_substream_t *substream); +int snd_emu10k1_free_pages(emu10k1_t *emu, snd_util_memblk_t *blk); +snd_util_memblk_t *snd_emu10k1_synth_alloc(emu10k1_t *emu, unsigned int size); +int snd_emu10k1_synth_free(emu10k1_t *emu, snd_util_memblk_t *blk); +int snd_emu10k1_synth_bzero(emu10k1_t *emu, snd_util_memblk_t *blk, int offset, int size); +int snd_emu10k1_synth_copy_from_user(emu10k1_t *emu, snd_util_memblk_t *blk, int offset, const char __user *data, int size); +int snd_emu10k1_memblk_map(emu10k1_t *emu, emu10k1_memblk_t *blk); + +/* voice allocation */ +int snd_emu10k1_voice_alloc(emu10k1_t *emu, emu10k1_voice_type_t type, int pair, emu10k1_voice_t **rvoice); +int snd_emu10k1_voice_free(emu10k1_t *emu, emu10k1_voice_t *pvoice); + +/* MIDI uart */ +int snd_emu10k1_midi(emu10k1_t * emu); +int snd_emu10k1_audigy_midi(emu10k1_t * emu); + +/* proc interface */ +int snd_emu10k1_proc_init(emu10k1_t * emu); + +/* fx8010 irq handler */ +int snd_emu10k1_fx8010_register_irq_handler(emu10k1_t *emu, + snd_fx8010_irq_handler_t *handler, + unsigned char gpr_running, + void *private_data, + snd_emu10k1_fx8010_irq_t **r_irq); +int snd_emu10k1_fx8010_unregister_irq_handler(emu10k1_t *emu, + snd_emu10k1_fx8010_irq_t *irq); + +#endif /* __KERNEL__ */ + +/* + * ---- FX8010 ---- + */ + +#define EMU10K1_CARD_CREATIVE 0x00000000 +#define EMU10K1_CARD_EMUAPS 0x00000001 + +#define EMU10K1_FX8010_PCM_COUNT 8 + +/* instruction set */ +#define iMAC0 0x00 /* R = A + (X * Y >> 31) ; saturation */ +#define iMAC1 0x01 /* R = A + (-X * Y >> 31) ; saturation */ +#define iMAC2 0x02 /* R = A + (X * Y >> 31) ; wraparound */ +#define iMAC3 0x03 /* R = A + (-X * Y >> 31) ; wraparound */ +#define iMACINT0 0x04 /* R = A + X * Y ; saturation */ +#define iMACINT1 0x05 /* R = A + X * Y ; wraparound (31-bit) */ +#define iACC3 0x06 /* R = A + X + Y ; saturation */ +#define iMACMV 0x07 /* R = A, acc += X * Y >> 31 */ +#define iANDXOR 0x08 /* R = (A & X) ^ Y */ +#define iTSTNEG 0x09 /* R = (A >= Y) ? X : ~X */ +#define iLIMITGE 0x0a /* R = (A >= Y) ? X : Y */ +#define iLIMITLT 0x0b /* R = (A < Y) ? X : Y */ +#define iLOG 0x0c /* R = linear_data, A (log_data), X (max_exp), Y (format_word) */ +#define iEXP 0x0d /* R = log_data, A (linear_data), X (max_exp), Y (format_word) */ +#define iINTERP 0x0e /* R = A + (X * (Y - A) >> 31) ; saturation */ +#define iSKIP 0x0f /* R = A (cc_reg), X (count), Y (cc_test) */ + +/* GPRs */ +#define FXBUS(x) (0x00 + (x)) /* x = 0x00 - 0x0f */ +#define EXTIN(x) (0x10 + (x)) /* x = 0x00 - 0x0f */ +#define EXTOUT(x) (0x20 + (x)) /* x = 0x00 - 0x0f physical outs -> FXWC low 16 bits */ +#define FXBUS2(x) (0x30 + (x)) /* x = 0x00 - 0x0f copies of fx buses for capture -> FXWC high 16 bits */ + /* NB: 0x31 and 0x32 are shared with Center/LFE on SB live 5.1 */ + +#define C_00000000 0x40 +#define C_00000001 0x41 +#define C_00000002 0x42 +#define C_00000003 0x43 +#define C_00000004 0x44 +#define C_00000008 0x45 +#define C_00000010 0x46 +#define C_00000020 0x47 +#define C_00000100 0x48 +#define C_00010000 0x49 +#define C_00080000 0x4a +#define C_10000000 0x4b +#define C_20000000 0x4c +#define C_40000000 0x4d +#define C_80000000 0x4e +#define C_7fffffff 0x4f +#define C_ffffffff 0x50 +#define C_fffffffe 0x51 +#define C_c0000000 0x52 +#define C_4f1bbcdc 0x53 +#define C_5a7ef9db 0x54 +#define C_00100000 0x55 /* ?? */ +#define GPR_ACCU 0x56 /* ACCUM, accumulator */ +#define GPR_COND 0x57 /* CCR, condition register */ +#define GPR_NOISE0 0x58 /* noise source */ +#define GPR_NOISE1 0x59 /* noise source */ +#define GPR_IRQ 0x5a /* IRQ register */ +#define GPR_DBAC 0x5b /* TRAM Delay Base Address Counter */ +#define GPR(x) (FXGPREGBASE + (x)) /* free GPRs: x = 0x00 - 0xff */ +#define ITRAM_DATA(x) (TANKMEMDATAREGBASE + 0x00 + (x)) /* x = 0x00 - 0x7f */ +#define ETRAM_DATA(x) (TANKMEMDATAREGBASE + 0x80 + (x)) /* x = 0x00 - 0x1f */ +#define ITRAM_ADDR(x) (TANKMEMADDRREGBASE + 0x00 + (x)) /* x = 0x00 - 0x7f */ +#define ETRAM_ADDR(x) (TANKMEMADDRREGBASE + 0x80 + (x)) /* x = 0x00 - 0x1f */ + +#define A_ITRAM_DATA(x) (TANKMEMDATAREGBASE + 0x00 + (x)) /* x = 0x00 - 0xbf */ +#define A_ETRAM_DATA(x) (TANKMEMDATAREGBASE + 0xc0 + (x)) /* x = 0x00 - 0x3f */ +#define A_ITRAM_ADDR(x) (TANKMEMADDRREGBASE + 0x00 + (x)) /* x = 0x00 - 0xbf */ +#define A_ETRAM_ADDR(x) (TANKMEMADDRREGBASE + 0xc0 + (x)) /* x = 0x00 - 0x3f */ +#define A_ITRAM_CTL(x) (A_TANKMEMCTLREGBASE + 0x00 + (x)) /* x = 0x00 - 0xbf */ +#define A_ETRAM_CTL(x) (A_TANKMEMCTLREGBASE + 0xc0 + (x)) /* x = 0x00 - 0x3f */ + +#define A_FXBUS(x) (0x00 + (x)) /* x = 0x00 - 0x3f FX buses */ +#define A_EXTIN(x) (0x40 + (x)) /* x = 0x00 - 0x0f physical ins */ +#define A_P16VIN(x) (0x50 + (x)) /* x = 0x00 - 0x0f p16v ins (A2 only) "EMU32 inputs" */ +#define A_EXTOUT(x) (0x60 + (x)) /* x = 0x00 - 0x1f physical outs -> A_FXWC1 0x79-7f unknown */ +#define A_FXBUS2(x) (0x80 + (x)) /* x = 0x00 - 0x1f extra outs used for EFX capture -> A_FXWC2 */ +#define A_EMU32OUTH(x) (0xa0 + (x)) /* x = 0x00 - 0x0f "EMU32_OUT_10 - _1F" - ??? */ +#define A_EMU32OUTL(x) (0xb0 + (x)) /* x = 0x00 - 0x0f "EMU32_OUT_1 - _F" - ??? */ +#define A_GPR(x) (A_FXGPREGBASE + (x)) + +/* cc_reg constants */ +#define CC_REG_NORMALIZED C_00000001 +#define CC_REG_BORROW C_00000002 +#define CC_REG_MINUS C_00000004 +#define CC_REG_ZERO C_00000008 +#define CC_REG_SATURATE C_00000010 +#define CC_REG_NONZERO C_00000100 + +/* FX buses */ +#define FXBUS_PCM_LEFT 0x00 +#define FXBUS_PCM_RIGHT 0x01 +#define FXBUS_PCM_LEFT_REAR 0x02 +#define FXBUS_PCM_RIGHT_REAR 0x03 +#define FXBUS_MIDI_LEFT 0x04 +#define FXBUS_MIDI_RIGHT 0x05 +#define FXBUS_PCM_CENTER 0x06 +#define FXBUS_PCM_LFE 0x07 +#define FXBUS_PCM_LEFT_FRONT 0x08 +#define FXBUS_PCM_RIGHT_FRONT 0x09 +#define FXBUS_MIDI_REVERB 0x0c +#define FXBUS_MIDI_CHORUS 0x0d +#define FXBUS_PCM_LEFT_SIDE 0x0e +#define FXBUS_PCM_RIGHT_SIDE 0x0f +#define FXBUS_PT_LEFT 0x14 +#define FXBUS_PT_RIGHT 0x15 + +/* Inputs */ +#define EXTIN_AC97_L 0x00 /* AC'97 capture channel - left */ +#define EXTIN_AC97_R 0x01 /* AC'97 capture channel - right */ +#define EXTIN_SPDIF_CD_L 0x02 /* internal S/PDIF CD - onboard - left */ +#define EXTIN_SPDIF_CD_R 0x03 /* internal S/PDIF CD - onboard - right */ +#define EXTIN_ZOOM_L 0x04 /* Zoom Video I2S - left */ +#define EXTIN_ZOOM_R 0x05 /* Zoom Video I2S - right */ +#define EXTIN_TOSLINK_L 0x06 /* LiveDrive - TOSLink Optical - left */ +#define EXTIN_TOSLINK_R 0x07 /* LiveDrive - TOSLink Optical - right */ +#define EXTIN_LINE1_L 0x08 /* LiveDrive - Line/Mic 1 - left */ +#define EXTIN_LINE1_R 0x09 /* LiveDrive - Line/Mic 1 - right */ +#define EXTIN_COAX_SPDIF_L 0x0a /* LiveDrive - Coaxial S/PDIF - left */ +#define EXTIN_COAX_SPDIF_R 0x0b /* LiveDrive - Coaxial S/PDIF - right */ +#define EXTIN_LINE2_L 0x0c /* LiveDrive - Line/Mic 2 - left */ +#define EXTIN_LINE2_R 0x0d /* LiveDrive - Line/Mic 2 - right */ + +/* Outputs */ +#define EXTOUT_AC97_L 0x00 /* AC'97 playback channel - left */ +#define EXTOUT_AC97_R 0x01 /* AC'97 playback channel - right */ +#define EXTOUT_TOSLINK_L 0x02 /* LiveDrive - TOSLink Optical - left */ +#define EXTOUT_TOSLINK_R 0x03 /* LiveDrive - TOSLink Optical - right */ +#define EXTOUT_AC97_CENTER 0x04 /* SB Live 5.1 - center */ +#define EXTOUT_AC97_LFE 0x05 /* SB Live 5.1 - LFE */ +#define EXTOUT_HEADPHONE_L 0x06 /* LiveDrive - Headphone - left */ +#define EXTOUT_HEADPHONE_R 0x07 /* LiveDrive - Headphone - right */ +#define EXTOUT_REAR_L 0x08 /* Rear channel - left */ +#define EXTOUT_REAR_R 0x09 /* Rear channel - right */ +#define EXTOUT_ADC_CAP_L 0x0a /* ADC Capture buffer - left */ +#define EXTOUT_ADC_CAP_R 0x0b /* ADC Capture buffer - right */ +#define EXTOUT_MIC_CAP 0x0c /* MIC Capture buffer */ +#define EXTOUT_AC97_REAR_L 0x0d /* SB Live 5.1 (c) 2003 - Rear Left */ +#define EXTOUT_AC97_REAR_R 0x0e /* SB Live 5.1 (c) 2003 - Rear Right */ +#define EXTOUT_ACENTER 0x11 /* Analog Center */ +#define EXTOUT_ALFE 0x12 /* Analog LFE */ + +/* Audigy Inputs */ +#define A_EXTIN_AC97_L 0x00 /* AC'97 capture channel - left */ +#define A_EXTIN_AC97_R 0x01 /* AC'97 capture channel - right */ +#define A_EXTIN_SPDIF_CD_L 0x02 /* digital CD left */ +#define A_EXTIN_SPDIF_CD_R 0x03 /* digital CD left */ +#define A_EXTIN_OPT_SPDIF_L 0x04 /* audigy drive Optical SPDIF - left */ +#define A_EXTIN_OPT_SPDIF_R 0x05 /* right */ +#define A_EXTIN_LINE2_L 0x08 /* audigy drive line2/mic2 - left */ +#define A_EXTIN_LINE2_R 0x09 /* right */ +#define A_EXTIN_ADC_L 0x0a /* Philips ADC - left */ +#define A_EXTIN_ADC_R 0x0b /* right */ +#define A_EXTIN_AUX2_L 0x0c /* audigy drive aux2 - left */ +#define A_EXTIN_AUX2_R 0x0d /* - right */ + +/* Audigiy Outputs */ +#define A_EXTOUT_FRONT_L 0x00 /* digital front left */ +#define A_EXTOUT_FRONT_R 0x01 /* right */ +#define A_EXTOUT_CENTER 0x02 /* digital front center */ +#define A_EXTOUT_LFE 0x03 /* digital front lfe */ +#define A_EXTOUT_HEADPHONE_L 0x04 /* headphone audigy drive left */ +#define A_EXTOUT_HEADPHONE_R 0x05 /* right */ +#define A_EXTOUT_REAR_L 0x06 /* digital rear left */ +#define A_EXTOUT_REAR_R 0x07 /* right */ +#define A_EXTOUT_AFRONT_L 0x08 /* analog front left */ +#define A_EXTOUT_AFRONT_R 0x09 /* right */ +#define A_EXTOUT_ACENTER 0x0a /* analog center */ +#define A_EXTOUT_ALFE 0x0b /* analog LFE */ +#define A_EXTOUT_ASIDE_L 0x0c /* analog side left - Audigy 2 ZS */ +#define A_EXTOUT_ASIDE_R 0x0d /* right - Audigy 2 ZS */ +#define A_EXTOUT_AREAR_L 0x0e /* analog rear left */ +#define A_EXTOUT_AREAR_R 0x0f /* right */ +#define A_EXTOUT_AC97_L 0x10 /* AC97 left (front) */ +#define A_EXTOUT_AC97_R 0x11 /* right */ +#define A_EXTOUT_ADC_CAP_L 0x16 /* ADC capture buffer left */ +#define A_EXTOUT_ADC_CAP_R 0x17 /* right */ +#define A_EXTOUT_MIC_CAP 0x18 /* Mic capture buffer */ + +/* Audigy constants */ +#define A_C_00000000 0xc0 +#define A_C_00000001 0xc1 +#define A_C_00000002 0xc2 +#define A_C_00000003 0xc3 +#define A_C_00000004 0xc4 +#define A_C_00000008 0xc5 +#define A_C_00000010 0xc6 +#define A_C_00000020 0xc7 +#define A_C_00000100 0xc8 +#define A_C_00010000 0xc9 +#define A_C_00000800 0xca +#define A_C_10000000 0xcb +#define A_C_20000000 0xcc +#define A_C_40000000 0xcd +#define A_C_80000000 0xce +#define A_C_7fffffff 0xcf +#define A_C_ffffffff 0xd0 +#define A_C_fffffffe 0xd1 +#define A_C_c0000000 0xd2 +#define A_C_4f1bbcdc 0xd3 +#define A_C_5a7ef9db 0xd4 +#define A_C_00100000 0xd5 +#define A_GPR_ACCU 0xd6 /* ACCUM, accumulator */ +#define A_GPR_COND 0xd7 /* CCR, condition register */ +#define A_GPR_NOISE0 0xd8 /* noise source */ +#define A_GPR_NOISE1 0xd9 /* noise source */ +#define A_GPR_IRQ 0xda /* IRQ register */ +#define A_GPR_DBAC 0xdb /* TRAM Delay Base Address Counter - internal */ +#define A_GPR_DBACE 0xde /* TRAM Delay Base Address Counter - external */ + +/* definitions for debug register */ +#define EMU10K1_DBG_ZC 0x80000000 /* zero tram counter */ +#define EMU10K1_DBG_SATURATION_OCCURED 0x02000000 /* saturation control */ +#define EMU10K1_DBG_SATURATION_ADDR 0x01ff0000 /* saturation address */ +#define EMU10K1_DBG_SINGLE_STEP 0x00008000 /* single step mode */ +#define EMU10K1_DBG_STEP 0x00004000 /* start single step */ +#define EMU10K1_DBG_CONDITION_CODE 0x00003e00 /* condition code */ +#define EMU10K1_DBG_SINGLE_STEP_ADDR 0x000001ff /* single step address */ + +/* tank memory address line */ +#ifndef __KERNEL__ +#define TANKMEMADDRREG_ADDR_MASK 0x000fffff /* 20 bit tank address field */ +#define TANKMEMADDRREG_CLEAR 0x00800000 /* Clear tank memory */ +#define TANKMEMADDRREG_ALIGN 0x00400000 /* Align read or write relative to tank access */ +#define TANKMEMADDRREG_WRITE 0x00200000 /* Write to tank memory */ +#define TANKMEMADDRREG_READ 0x00100000 /* Read from tank memory */ +#endif + +typedef struct { + unsigned int card; /* card type */ + unsigned int internal_tram_size; /* in samples */ + unsigned int external_tram_size; /* in samples */ + char fxbus_names[16][32]; /* names of FXBUSes */ + char extin_names[16][32]; /* names of external inputs */ + char extout_names[32][32]; /* names of external outputs */ + unsigned int gpr_controls; /* count of GPR controls */ +} emu10k1_fx8010_info_t; + +#define EMU10K1_GPR_TRANSLATION_NONE 0 +#define EMU10K1_GPR_TRANSLATION_TABLE100 1 +#define EMU10K1_GPR_TRANSLATION_BASS 2 +#define EMU10K1_GPR_TRANSLATION_TREBLE 3 +#define EMU10K1_GPR_TRANSLATION_ONOFF 4 + +typedef struct { + snd_ctl_elem_id_t id; /* full control ID definition */ + unsigned int vcount; /* visible count */ + unsigned int count; /* count of GPR (1..16) */ + unsigned short gpr[32]; /* GPR number(s) */ + unsigned int value[32]; /* initial values */ + unsigned int min; /* minimum range */ + unsigned int max; /* maximum range */ + unsigned int translation; /* translation type (EMU10K1_GPR_TRANSLATION*) */ +} emu10k1_fx8010_control_gpr_t; + +typedef struct { + char name[128]; + + DECLARE_BITMAP(gpr_valid, 0x200); /* bitmask of valid initializers */ + u_int32_t __user *gpr_map; /* initializers */ + + unsigned int gpr_add_control_count; /* count of GPR controls to add/replace */ + emu10k1_fx8010_control_gpr_t __user *gpr_add_controls; /* GPR controls to add/replace */ + + unsigned int gpr_del_control_count; /* count of GPR controls to remove */ + snd_ctl_elem_id_t __user *gpr_del_controls; /* IDs of GPR controls to remove */ + + unsigned int gpr_list_control_count; /* count of GPR controls to list */ + unsigned int gpr_list_control_total; /* total count of GPR controls */ + emu10k1_fx8010_control_gpr_t __user *gpr_list_controls; /* listed GPR controls */ + + DECLARE_BITMAP(tram_valid, 0x100); /* bitmask of valid initializers */ + u_int32_t __user *tram_data_map; /* data initializers */ + u_int32_t __user *tram_addr_map; /* map initializers */ + + DECLARE_BITMAP(code_valid, 1024); /* bitmask of valid instructions */ + u_int32_t __user *code; /* one instruction - 64 bits */ +} emu10k1_fx8010_code_t; + +typedef struct { + unsigned int address; /* 31.bit == 1 -> external TRAM */ + unsigned int size; /* size in samples (4 bytes) */ + unsigned int *samples; /* pointer to samples (20-bit) */ + /* NULL->clear memory */ +} emu10k1_fx8010_tram_t; + +typedef struct { + unsigned int substream; /* substream number */ + unsigned int res1; /* reserved */ + unsigned int channels; /* 16-bit channels count, zero = remove this substream */ + unsigned int tram_start; /* ring buffer position in TRAM (in samples) */ + unsigned int buffer_size; /* count of buffered samples */ + unsigned short gpr_size; /* GPR containing size of ringbuffer in samples (host) */ + unsigned short gpr_ptr; /* GPR containing current pointer in the ring buffer (host = reset, FX8010) */ + unsigned short gpr_count; /* GPR containing count of samples between two interrupts (host) */ + unsigned short gpr_tmpcount; /* GPR containing current count of samples to interrupt (host = set, FX8010) */ + unsigned short gpr_trigger; /* GPR containing trigger (activate) information (host) */ + unsigned short gpr_running; /* GPR containing info if PCM is running (FX8010) */ + unsigned char pad; /* reserved */ + unsigned char etram[32]; /* external TRAM address & data (one per channel) */ + unsigned int res2; /* reserved */ +} emu10k1_fx8010_pcm_t; + +#define SNDRV_EMU10K1_IOCTL_INFO _IOR ('H', 0x10, emu10k1_fx8010_info_t) +#define SNDRV_EMU10K1_IOCTL_CODE_POKE _IOW ('H', 0x11, emu10k1_fx8010_code_t) +#define SNDRV_EMU10K1_IOCTL_CODE_PEEK _IOWR('H', 0x12, emu10k1_fx8010_code_t) +#define SNDRV_EMU10K1_IOCTL_TRAM_SETUP _IOW ('H', 0x20, int) +#define SNDRV_EMU10K1_IOCTL_TRAM_POKE _IOW ('H', 0x21, emu10k1_fx8010_tram_t) +#define SNDRV_EMU10K1_IOCTL_TRAM_PEEK _IOWR('H', 0x22, emu10k1_fx8010_tram_t) +#define SNDRV_EMU10K1_IOCTL_PCM_POKE _IOW ('H', 0x30, emu10k1_fx8010_pcm_t) +#define SNDRV_EMU10K1_IOCTL_PCM_PEEK _IOWR('H', 0x31, emu10k1_fx8010_pcm_t) +#define SNDRV_EMU10K1_IOCTL_STOP _IO ('H', 0x80) +#define SNDRV_EMU10K1_IOCTL_CONTINUE _IO ('H', 0x81) +#define SNDRV_EMU10K1_IOCTL_ZERO_TRAM_COUNTER _IO ('H', 0x82) +#define SNDRV_EMU10K1_IOCTL_SINGLE_STEP _IOW ('H', 0x83, int) +#define SNDRV_EMU10K1_IOCTL_DBG_READ _IOR ('H', 0x84, int) + +#endif /* __SOUND_EMU10K1_H */ |