diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/linux/mfd/db8500-prcmu.h | 992 |
1 files changed, 956 insertions, 36 deletions
diff --git a/include/linux/mfd/db8500-prcmu.h b/include/linux/mfd/db8500-prcmu.h index d591d79aa6f0..917dbcab701c 100644 --- a/include/linux/mfd/db8500-prcmu.h +++ b/include/linux/mfd/db8500-prcmu.h @@ -2,57 +2,977 @@ * Copyright (C) STMicroelectronics 2009 * Copyright (C) ST-Ericsson SA 2010 * - * Author: Sundar Iyer <sundar.iyer@stericsson.com> - * Author: Martin Persson <martin.persson@stericsson.com> - * * License Terms: GNU General Public License v2 + * Author: Kumar Sanghvi <kumar.sanghvi@stericsson.com> * - * PRCM Unit definitions + * PRCMU f/w APIs */ +#ifndef __MFD_DB8500_PRCMU_H +#define __MFD_DB8500_PRCMU_H + +#include <linux/interrupt.h> +#include <linux/notifier.h> -#ifndef __MACH_PRCMU_DEFS_H -#define __MACH_PRCMU_DEFS_H +/* This portion previously known as <mach/prcmu-fw-defs_v1.h> */ -enum prcmu_cpu_opp { - CPU_OPP_INIT = 0x00, - CPU_OPP_NO_CHANGE = 0x01, - CPU_OPP_100 = 0x02, - CPU_OPP_50 = 0x03, - CPU_OPP_MAX = 0x04, - CPU_OPP_EXT_CLK = 0x07 +/** + * enum state - ON/OFF state definition + * @OFF: State is ON + * @ON: State is OFF + * + */ +enum state { + OFF = 0x0, + ON = 0x1, }; -enum prcmu_ape_opp { - APE_OPP_NO_CHANGE = 0x00, - APE_OPP_100 = 0x02, - APE_OPP_50 = 0x03, + +/** + * enum ret_state - general purpose On/Off/Retention states + * + */ +enum ret_state { + OFFST = 0, + ONST = 1, + RETST = 2 }; -#endif /* __MACH_PRCMU_DEFS_H */ +/** + * enum clk_arm - ARM Cortex A9 clock schemes + * @A9_OFF: + * @A9_BOOT: + * @A9_OPPT1: + * @A9_OPPT2: + * @A9_EXTCLK: + */ +enum clk_arm { + A9_OFF, + A9_BOOT, + A9_OPPT1, + A9_OPPT2, + A9_EXTCLK +}; -/* - * Copyright (C) STMicroelectronics 2009 - * Copyright (C) ST-Ericsson SA 2010 +/** + * enum clk_gen - GEN#0/GEN#1 clock schemes + * @GEN_OFF: + * @GEN_BOOT: + * @GEN_OPPT1: + */ +enum clk_gen { + GEN_OFF, + GEN_BOOT, + GEN_OPPT1, +}; + +/* some information between arm and xp70 */ + +/** + * enum romcode_write - Romcode message written by A9 AND read by XP70 + * @RDY_2_DS: Value set when ApDeepSleep state can be executed by XP70 + * @RDY_2_XP70_RST: Value set when 0x0F has been successfully polled by the + * romcode. The xp70 will go into self-reset + */ +enum romcode_write { + RDY_2_DS = 0x09, + RDY_2_XP70_RST = 0x10 +}; + +/** + * enum romcode_read - Romcode message written by XP70 and read by A9 + * @INIT: Init value when romcode field is not used + * @FS_2_DS: Value set when power state is going from ApExecute to + * ApDeepSleep + * @END_DS: Value set when ApDeepSleep power state is reached coming from + * ApExecute state + * @DS_TO_FS: Value set when power state is going from ApDeepSleep to + * ApExecute + * @END_FS: Value set when ApExecute power state is reached coming from + * ApDeepSleep state + * @SWR: Value set when power state is going to ApReset + * @END_SWR: Value set when the xp70 finished executing ApReset actions and + * waits for romcode acknowledgment to go to self-reset + */ +enum romcode_read { + INIT = 0x00, + FS_2_DS = 0x0A, + END_DS = 0x0B, + DS_TO_FS = 0x0C, + END_FS = 0x0D, + SWR = 0x0E, + END_SWR = 0x0F +}; + +/** + * enum ap_pwrst - current power states defined in PRCMU firmware + * @NO_PWRST: Current power state init + * @AP_BOOT: Current power state is apBoot + * @AP_EXECUTE: Current power state is apExecute + * @AP_DEEP_SLEEP: Current power state is apDeepSleep + * @AP_SLEEP: Current power state is apSleep + * @AP_IDLE: Current power state is apIdle + * @AP_RESET: Current power state is apReset + */ +enum ap_pwrst { + NO_PWRST = 0x00, + AP_BOOT = 0x01, + AP_EXECUTE = 0x02, + AP_DEEP_SLEEP = 0x03, + AP_SLEEP = 0x04, + AP_IDLE = 0x05, + AP_RESET = 0x06 +}; + +/** + * enum ap_pwrst_trans - Transition states defined in PRCMU firmware + * @NO_TRANSITION: No power state transition + * @APEXECUTE_TO_APSLEEP: Power state transition from ApExecute to ApSleep + * @APIDLE_TO_APSLEEP: Power state transition from ApIdle to ApSleep + * @APBOOT_TO_APEXECUTE: Power state transition from ApBoot to ApExecute + * @APEXECUTE_TO_APDEEPSLEEP: Power state transition from ApExecute to + * ApDeepSleep + * @APEXECUTE_TO_APIDLE: Power state transition from ApExecute to ApIdle + */ +enum ap_pwrst_trans { + NO_TRANSITION = 0x00, + APEXECUTE_TO_APSLEEP = 0x01, + APIDLE_TO_APSLEEP = 0x02, /* To be removed */ + PRCMU_AP_SLEEP = 0x01, + APBOOT_TO_APEXECUTE = 0x03, + APEXECUTE_TO_APDEEPSLEEP = 0x04, /* To be removed */ + PRCMU_AP_DEEP_SLEEP = 0x04, + APEXECUTE_TO_APIDLE = 0x05, /* To be removed */ + PRCMU_AP_IDLE = 0x05, + PRCMU_AP_DEEP_IDLE = 0x07, +}; + +/** + * enum ddr_pwrst - DDR power states definition + * @DDR_PWR_STATE_UNCHANGED: SDRAM and DDR controller state is unchanged + * @DDR_PWR_STATE_ON: + * @DDR_PWR_STATE_OFFLOWLAT: + * @DDR_PWR_STATE_OFFHIGHLAT: + */ +enum ddr_pwrst { + DDR_PWR_STATE_UNCHANGED = 0x00, + DDR_PWR_STATE_ON = 0x01, + DDR_PWR_STATE_OFFLOWLAT = 0x02, + DDR_PWR_STATE_OFFHIGHLAT = 0x03 +}; + +/** + * enum arm_opp - ARM OPP states definition + * @ARM_OPP_INIT: + * @ARM_NO_CHANGE: The ARM operating point is unchanged + * @ARM_100_OPP: The new ARM operating point is arm100opp + * @ARM_50_OPP: The new ARM operating point is arm50opp + * @ARM_MAX_OPP: Operating point is "max" (more than 100) + * @ARM_MAX_FREQ100OPP: Set max opp if available, else 100 + * @ARM_EXTCLK: The new ARM operating point is armExtClk + */ +enum arm_opp { + ARM_OPP_INIT = 0x00, + ARM_NO_CHANGE = 0x01, + ARM_100_OPP = 0x02, + ARM_50_OPP = 0x03, + ARM_MAX_OPP = 0x04, + ARM_MAX_FREQ100OPP = 0x05, + ARM_EXTCLK = 0x07 +}; + +/** + * enum ape_opp - APE OPP states definition + * @APE_OPP_INIT: + * @APE_NO_CHANGE: The APE operating point is unchanged + * @APE_100_OPP: The new APE operating point is ape100opp + * @APE_50_OPP: 50% + */ +enum ape_opp { + APE_OPP_INIT = 0x00, + APE_NO_CHANGE = 0x01, + APE_100_OPP = 0x02, + APE_50_OPP = 0x03 +}; + +/** + * enum hw_acc_state - State definition for hardware accelerator + * @HW_NO_CHANGE: The hardware accelerator state must remain unchanged + * @HW_OFF: The hardware accelerator must be switched off + * @HW_OFF_RAMRET: The hardware accelerator must be switched off with its + * internal RAM in retention + * @HW_ON: The hwa hardware accelerator hwa must be switched on * - * Author: Kumar Sanghvi <kumar.sanghvi@stericsson.com> - * Author: Sundar Iyer <sundar.iyer@stericsson.com> - * Author: Mattias Nilsson <mattias.i.nilsson@stericsson.com> + * NOTE! Deprecated, to be removed when all users switched over to use the + * regulator API. + */ +enum hw_acc_state { + HW_NO_CHANGE = 0x00, + HW_OFF = 0x01, + HW_OFF_RAMRET = 0x02, + HW_ON = 0x04 +}; + +/** + * enum mbox_2_arm_stat - Status messages definition for mbox_arm + * @BOOT_TO_EXECUTEOK: The apBoot to apExecute state transition has been + * completed + * @DEEPSLEEPOK: The apExecute to apDeepSleep state transition has been + * completed + * @SLEEPOK: The apExecute to apSleep state transition has been completed + * @IDLEOK: The apExecute to apIdle state transition has been completed + * @SOFTRESETOK: The A9 watchdog/ SoftReset state has been completed + * @SOFTRESETGO : The A9 watchdog/SoftReset state is on going + * @BOOT_TO_EXECUTE: The apBoot to apExecute state transition is on going + * @EXECUTE_TO_DEEPSLEEP: The apExecute to apDeepSleep state transition is on + * going + * @DEEPSLEEP_TO_EXECUTE: The apDeepSleep to apExecute state transition is on + * going + * @DEEPSLEEP_TO_EXECUTEOK: The apDeepSleep to apExecute state transition has + * been completed + * @EXECUTE_TO_SLEEP: The apExecute to apSleep state transition is on going + * @SLEEP_TO_EXECUTE: The apSleep to apExecute state transition is on going + * @SLEEP_TO_EXECUTEOK: The apSleep to apExecute state transition has been + * completed + * @EXECUTE_TO_IDLE: The apExecute to apIdle state transition is on going + * @IDLE_TO_EXECUTE: The apIdle to apExecute state transition is on going + * @IDLE_TO_EXECUTEOK: The apIdle to apExecute state transition has been + * completed + * @INIT_STATUS: Status init + */ +enum ap_pwrsttr_status { + BOOT_TO_EXECUTEOK = 0xFF, + DEEPSLEEPOK = 0xFE, + SLEEPOK = 0xFD, + IDLEOK = 0xFC, + SOFTRESETOK = 0xFB, + SOFTRESETGO = 0xFA, + BOOT_TO_EXECUTE = 0xF9, + EXECUTE_TO_DEEPSLEEP = 0xF8, + DEEPSLEEP_TO_EXECUTE = 0xF7, + DEEPSLEEP_TO_EXECUTEOK = 0xF6, + EXECUTE_TO_SLEEP = 0xF5, + SLEEP_TO_EXECUTE = 0xF4, + SLEEP_TO_EXECUTEOK = 0xF3, + EXECUTE_TO_IDLE = 0xF2, + IDLE_TO_EXECUTE = 0xF1, + IDLE_TO_EXECUTEOK = 0xF0, + RDYTODS_RETURNTOEXE = 0xEF, + NORDYTODS_RETURNTOEXE = 0xEE, + EXETOSLEEP_RETURNTOEXE = 0xED, + EXETOIDLE_RETURNTOEXE = 0xEC, + INIT_STATUS = 0xEB, + + /*error messages */ + INITERROR = 0x00, + PLLARMLOCKP_ER = 0x01, + PLLDDRLOCKP_ER = 0x02, + PLLSOCLOCKP_ER = 0x03, + PLLSOCK1LOCKP_ER = 0x04, + ARMWFI_ER = 0x05, + SYSCLKOK_ER = 0x06, + I2C_NACK_DATA_ER = 0x07, + BOOT_ER = 0x08, + I2C_STATUS_ALWAYS_1 = 0x0A, + I2C_NACK_REG_ADDR_ER = 0x0B, + I2C_NACK_DATA0123_ER = 0x1B, + I2C_NACK_ADDR_ER = 0x1F, + CURAPPWRSTISNOT_BOOT = 0x20, + CURAPPWRSTISNOT_EXECUTE = 0x21, + CURAPPWRSTISNOT_SLEEPMODE = 0x22, + CURAPPWRSTISNOT_CORRECTFORIT10 = 0x23, + FIFO4500WUISNOT_WUPEVENT = 0x24, + PLL32KLOCKP_ER = 0x29, + DDRDEEPSLEEPOK_ER = 0x2A, + ROMCODEREADY_ER = 0x50, + WUPBEFOREDS = 0x51, + DDRCONFIG_ER = 0x52, + WUPBEFORESLEEP = 0x53, + WUPBEFOREIDLE = 0x54 +}; /* earlier called as mbox_2_arm_stat */ + +/** + * enum dvfs_stat - DVFS status messages definition + * @DVFS_GO: A state transition DVFS is on going + * @DVFS_ARM100OPPOK: The state transition DVFS has been completed for 100OPP + * @DVFS_ARM50OPPOK: The state transition DVFS has been completed for 50OPP + * @DVFS_ARMEXTCLKOK: The state transition DVFS has been completed for EXTCLK + * @DVFS_NOCHGTCLKOK: The state transition DVFS has been completed for + * NOCHGCLK + * @DVFS_INITSTATUS: Value init + */ +enum dvfs_stat { + DVFS_GO = 0xFF, + DVFS_ARM100OPPOK = 0xFE, + DVFS_ARM50OPPOK = 0xFD, + DVFS_ARMEXTCLKOK = 0xFC, + DVFS_NOCHGTCLKOK = 0xFB, + DVFS_INITSTATUS = 0x00 +}; + +/** + * enum sva_mmdsp_stat - SVA MMDSP status messages + * @SVA_MMDSP_GO: SVAMMDSP interrupt has happened + * @SVA_MMDSP_INIT: Status init + */ +enum sva_mmdsp_stat { + SVA_MMDSP_GO = 0xFF, + SVA_MMDSP_INIT = 0x00 +}; + +/** + * enum sia_mmdsp_stat - SIA MMDSP status messages + * @SIA_MMDSP_GO: SIAMMDSP interrupt has happened + * @SIA_MMDSP_INIT: Status init + */ +enum sia_mmdsp_stat { + SIA_MMDSP_GO = 0xFF, + SIA_MMDSP_INIT = 0x00 +}; + +/** + * enum mbox_to_arm_err - Error messages definition + * @INIT_ERR: Init value + * @PLLARMLOCKP_ERR: PLLARM has not been correctly locked in given time + * @PLLDDRLOCKP_ERR: PLLDDR has not been correctly locked in the given time + * @PLLSOC0LOCKP_ERR: PLLSOC0 has not been correctly locked in the given time + * @PLLSOC1LOCKP_ERR: PLLSOC1 has not been correctly locked in the given time + * @ARMWFI_ERR: The ARM WFI has not been correctly executed in the given time + * @SYSCLKOK_ERR: The SYSCLK is not available in the given time + * @BOOT_ERR: Romcode has not validated the XP70 self reset in the given time + * @ROMCODESAVECONTEXT: The Romcode didn.t correctly save it secure context + * @VARMHIGHSPEEDVALTO_ERR: The ARM high speed supply value transfered + * through I2C has not been correctly executed in the given time + * @VARMHIGHSPEEDACCESS_ERR: The command value of VarmHighSpeedVal transfered + * through I2C has not been correctly executed in the given time + * @VARMLOWSPEEDVALTO_ERR:The ARM low speed supply value transfered through + * I2C has not been correctly executed in the given time + * @VARMLOWSPEEDACCESS_ERR: The command value of VarmLowSpeedVal transfered + * through I2C has not been correctly executed in the given time + * @VARMRETENTIONVALTO_ERR: The ARM retention supply value transfered through + * I2C has not been correctly executed in the given time + * @VARMRETENTIONACCESS_ERR: The command value of VarmRetentionVal transfered + * through I2C has not been correctly executed in the given time + * @VAPEHIGHSPEEDVALTO_ERR: The APE highspeed supply value transfered through + * I2C has not been correctly executed in the given time + * @VSAFEHPVALTO_ERR: The SAFE high power supply value transfered through I2C + * has not been correctly executed in the given time + * @VMODSEL1VALTO_ERR: The MODEM sel1 supply value transfered through I2C has + * not been correctly executed in the given time + * @VMODSEL2VALTO_ERR: The MODEM sel2 supply value transfered through I2C has + * not been correctly executed in the given time + * @VARMOFFACCESS_ERR: The command value of Varm ON/OFF transfered through + * I2C has not been correctly executed in the given time + * @VAPEOFFACCESS_ERR: The command value of Vape ON/OFF transfered through + * I2C has not been correctly executed in the given time + * @VARMRETACCES_ERR: The command value of Varm retention ON/OFF transfered + * through I2C has not been correctly executed in the given time + * @CURAPPWRSTISNOTBOOT:Generated when Arm want to do power state transition + * ApBoot to ApExecute but the power current state is not Apboot + * @CURAPPWRSTISNOTEXECUTE: Generated when Arm want to do power state + * transition from ApExecute to others power state but the + * power current state is not ApExecute + * @CURAPPWRSTISNOTSLEEPMODE: Generated when wake up events are transmitted + * but the power current state is not ApDeepSleep/ApSleep/ApIdle + * @CURAPPWRSTISNOTCORRECTDBG: Generated when wake up events are transmitted + * but the power current state is not correct + * @ARMREGU1VALTO_ERR:The ArmRegu1 value transferred through I2C has not + * been correctly executed in the given time + * @ARMREGU2VALTO_ERR: The ArmRegu2 value transferred through I2C has not + * been correctly executed in the given time + * @VAPEREGUVALTO_ERR: The VApeRegu value transfered through I2C has not + * been correctly executed in the given time + * @VSMPS3REGUVALTO_ERR: The VSmps3Regu value transfered through I2C has not + * been correctly executed in the given time + * @VMODREGUVALTO_ERR: The VModemRegu value transfered through I2C has not + * been correctly executed in the given time + */ +enum mbox_to_arm_err { + INIT_ERR = 0x00, + PLLARMLOCKP_ERR = 0x01, + PLLDDRLOCKP_ERR = 0x02, + PLLSOC0LOCKP_ERR = 0x03, + PLLSOC1LOCKP_ERR = 0x04, + ARMWFI_ERR = 0x05, + SYSCLKOK_ERR = 0x06, + BOOT_ERR = 0x07, + ROMCODESAVECONTEXT = 0x08, + VARMHIGHSPEEDVALTO_ERR = 0x10, + VARMHIGHSPEEDACCESS_ERR = 0x11, + VARMLOWSPEEDVALTO_ERR = 0x12, + VARMLOWSPEEDACCESS_ERR = 0x13, + VARMRETENTIONVALTO_ERR = 0x14, + VARMRETENTIONACCESS_ERR = 0x15, + VAPEHIGHSPEEDVALTO_ERR = 0x16, + VSAFEHPVALTO_ERR = 0x17, + VMODSEL1VALTO_ERR = 0x18, + VMODSEL2VALTO_ERR = 0x19, + VARMOFFACCESS_ERR = 0x1A, + VAPEOFFACCESS_ERR = 0x1B, + VARMRETACCES_ERR = 0x1C, + CURAPPWRSTISNOTBOOT = 0x20, + CURAPPWRSTISNOTEXECUTE = 0x21, + CURAPPWRSTISNOTSLEEPMODE = 0x22, + CURAPPWRSTISNOTCORRECTDBG = 0x23, + ARMREGU1VALTO_ERR = 0x24, + ARMREGU2VALTO_ERR = 0x25, + VAPEREGUVALTO_ERR = 0x26, + VSMPS3REGUVALTO_ERR = 0x27, + VMODREGUVALTO_ERR = 0x28 +}; + +enum hw_acc { + SVAMMDSP = 0, + SVAPIPE = 1, + SIAMMDSP = 2, + SIAPIPE = 3, + SGA = 4, + B2R2MCDE = 5, + ESRAM12 = 6, + ESRAM34 = 7, +}; + +enum cs_pwrmgt { + PWRDNCS0 = 0, + WKUPCS0 = 1, + PWRDNCS1 = 2, + WKUPCS1 = 3 +}; + +/* Defs related to autonomous power management */ + +/** + * enum sia_sva_pwr_policy - Power policy + * @NO_CHGT: No change + * @DSPOFF_HWPOFF: + * @DSPOFFRAMRET_HWPOFF: + * @DSPCLKOFF_HWPOFF: + * @DSPCLKOFF_HWPCLKOFF: * - * License Terms: GNU General Public License v2 + */ +enum sia_sva_pwr_policy { + NO_CHGT = 0x0, + DSPOFF_HWPOFF = 0x1, + DSPOFFRAMRET_HWPOFF = 0x2, + DSPCLKOFF_HWPOFF = 0x3, + DSPCLKOFF_HWPCLKOFF = 0x4, +}; + +/** + * enum auto_enable - Auto Power enable + * @AUTO_OFF: + * @AUTO_ON: + * + */ +enum auto_enable { + AUTO_OFF = 0x0, + AUTO_ON = 0x1, +}; + +/* End of file previously known as prcmu-fw-defs_v1.h */ + +/* PRCMU Wakeup defines */ +enum prcmu_wakeup_index { + PRCMU_WAKEUP_INDEX_RTC, + PRCMU_WAKEUP_INDEX_RTT0, + PRCMU_WAKEUP_INDEX_RTT1, + PRCMU_WAKEUP_INDEX_HSI0, + PRCMU_WAKEUP_INDEX_HSI1, + PRCMU_WAKEUP_INDEX_USB, + PRCMU_WAKEUP_INDEX_ABB, + PRCMU_WAKEUP_INDEX_ABB_FIFO, + PRCMU_WAKEUP_INDEX_ARM, + NUM_PRCMU_WAKEUP_INDICES +}; +#define PRCMU_WAKEUP(_name) (BIT(PRCMU_WAKEUP_INDEX_##_name)) + +/* PRCMU QoS APE OPP class */ +#define PRCMU_QOS_APE_OPP 1 +#define PRCMU_QOS_DDR_OPP 2 +#define PRCMU_QOS_DEFAULT_VALUE -1 + +/** + * enum hw_acc_dev - enum for hw accelerators + * @HW_ACC_SVAMMDSP: for SVAMMDSP + * @HW_ACC_SVAPIPE: for SVAPIPE + * @HW_ACC_SIAMMDSP: for SIAMMDSP + * @HW_ACC_SIAPIPE: for SIAPIPE + * @HW_ACC_SGA: for SGA + * @HW_ACC_B2R2: for B2R2 + * @HW_ACC_MCDE: for MCDE + * @HW_ACC_ESRAM1: for ESRAM1 + * @HW_ACC_ESRAM2: for ESRAM2 + * @HW_ACC_ESRAM3: for ESRAM3 + * @HW_ACC_ESRAM4: for ESRAM4 + * @NUM_HW_ACC: number of hardware accelerators + * + * Different hw accelerators which can be turned ON/ + * OFF or put into retention (MMDSPs and ESRAMs). + * Used with EPOD API. * - * PRCM Unit f/w API + * NOTE! Deprecated, to be removed when all users switched over to use the + * regulator API. + */ +enum hw_acc_dev { + HW_ACC_SVAMMDSP, + HW_ACC_SVAPIPE, + HW_ACC_SIAMMDSP, + HW_ACC_SIAPIPE, + HW_ACC_SGA, + HW_ACC_B2R2, + HW_ACC_MCDE, + HW_ACC_ESRAM1, + HW_ACC_ESRAM2, + HW_ACC_ESRAM3, + HW_ACC_ESRAM4, + NUM_HW_ACC +}; + +/* + * Ids for all EPODs (power domains) + * - EPOD_ID_SVAMMDSP: power domain for SVA MMDSP + * - EPOD_ID_SVAPIPE: power domain for SVA pipe + * - EPOD_ID_SIAMMDSP: power domain for SIA MMDSP + * - EPOD_ID_SIAPIPE: power domain for SIA pipe + * - EPOD_ID_SGA: power domain for SGA + * - EPOD_ID_B2R2_MCDE: power domain for B2R2 and MCDE + * - EPOD_ID_ESRAM12: power domain for ESRAM 1 and 2 + * - EPOD_ID_ESRAM34: power domain for ESRAM 3 and 4 + * - NUM_EPOD_ID: number of power domains + */ +#define EPOD_ID_SVAMMDSP 0 +#define EPOD_ID_SVAPIPE 1 +#define EPOD_ID_SIAMMDSP 2 +#define EPOD_ID_SIAPIPE 3 +#define EPOD_ID_SGA 4 +#define EPOD_ID_B2R2_MCDE 5 +#define EPOD_ID_ESRAM12 6 +#define EPOD_ID_ESRAM34 7 +#define NUM_EPOD_ID 8 + +/* + * state definition for EPOD (power domain) + * - EPOD_STATE_NO_CHANGE: The EPOD should remain unchanged + * - EPOD_STATE_OFF: The EPOD is switched off + * - EPOD_STATE_RAMRET: The EPOD is switched off with its internal RAM in + * retention + * - EPOD_STATE_ON_CLK_OFF: The EPOD is switched on, clock is still off + * - EPOD_STATE_ON: Same as above, but with clock enabled */ -#ifndef __MACH_PRCMU_H -#define __MACH_PRCMU_H +#define EPOD_STATE_NO_CHANGE 0x00 +#define EPOD_STATE_OFF 0x01 +#define EPOD_STATE_RAMRET 0x02 +#define EPOD_STATE_ON_CLK_OFF 0x03 +#define EPOD_STATE_ON 0x04 +/* + * CLKOUT sources + */ +#define PRCMU_CLKSRC_CLK38M 0x00 +#define PRCMU_CLKSRC_ACLK 0x01 +#define PRCMU_CLKSRC_SYSCLK 0x02 +#define PRCMU_CLKSRC_LCDCLK 0x03 +#define PRCMU_CLKSRC_SDMMCCLK 0x04 +#define PRCMU_CLKSRC_TVCLK 0x05 +#define PRCMU_CLKSRC_TIMCLK 0x06 +#define PRCMU_CLKSRC_CLK009 0x07 +/* These are only valid for CLKOUT1: */ +#define PRCMU_CLKSRC_SIAMMDSPCLK 0x40 +#define PRCMU_CLKSRC_I2CCLK 0x41 +#define PRCMU_CLKSRC_MSP02CLK 0x42 +#define PRCMU_CLKSRC_ARMPLL_OBSCLK 0x43 +#define PRCMU_CLKSRC_HSIRXCLK 0x44 +#define PRCMU_CLKSRC_HSITXCLK 0x45 +#define PRCMU_CLKSRC_ARMCLKFIX 0x46 +#define PRCMU_CLKSRC_HDMICLK 0x47 + +/* + * Definitions for autonomous power management configuration. + */ + +#define PRCMU_AUTO_PM_OFF 0 +#define PRCMU_AUTO_PM_ON 1 + +#define PRCMU_AUTO_PM_POWER_ON_HSEM BIT(0) +#define PRCMU_AUTO_PM_POWER_ON_ABB_FIFO_IT BIT(1) + +enum prcmu_auto_pm_policy { + PRCMU_AUTO_PM_POLICY_NO_CHANGE, + PRCMU_AUTO_PM_POLICY_DSP_OFF_HWP_OFF, + PRCMU_AUTO_PM_POLICY_DSP_OFF_RAMRET_HWP_OFF, + PRCMU_AUTO_PM_POLICY_DSP_CLK_OFF_HWP_OFF, + PRCMU_AUTO_PM_POLICY_DSP_CLK_OFF_HWP_CLK_OFF, +}; + +/** + * struct prcmu_auto_pm_config - Autonomous power management configuration. + * @sia_auto_pm_enable: SIA autonomous pm enable. (PRCMU_AUTO_PM_{OFF,ON}) + * @sia_power_on: SIA power ON enable. (PRCMU_AUTO_PM_POWER_ON_* bitmask) + * @sia_policy: SIA power policy. (enum prcmu_auto_pm_policy) + * @sva_auto_pm_enable: SVA autonomous pm enable. (PRCMU_AUTO_PM_{OFF,ON}) + * @sva_power_on: SVA power ON enable. (PRCMU_AUTO_PM_POWER_ON_* bitmask) + * @sva_policy: SVA power policy. (enum prcmu_auto_pm_policy) + */ +struct prcmu_auto_pm_config { + u8 sia_auto_pm_enable; + u8 sia_power_on; + u8 sia_policy; + u8 sva_auto_pm_enable; + u8 sva_power_on; + u8 sva_policy; +}; + +/** + * enum ddr_opp - DDR OPP states definition + * @DDR_100_OPP: The new DDR operating point is ddr100opp + * @DDR_50_OPP: The new DDR operating point is ddr50opp + * @DDR_25_OPP: The new DDR operating point is ddr25opp + */ +enum ddr_opp { + DDR_100_OPP = 0x00, + DDR_50_OPP = 0x01, + DDR_25_OPP = 0x02, +}; + +/* + * Clock identifiers. + */ +enum prcmu_clock { + PRCMU_SGACLK, + PRCMU_UARTCLK, + PRCMU_MSP02CLK, + PRCMU_MSP1CLK, + PRCMU_I2CCLK, + PRCMU_SDMMCCLK, + PRCMU_SLIMCLK, + PRCMU_PER1CLK, + PRCMU_PER2CLK, + PRCMU_PER3CLK, + PRCMU_PER5CLK, + PRCMU_PER6CLK, + PRCMU_PER7CLK, + PRCMU_LCDCLK, + PRCMU_BMLCLK, + PRCMU_HSITXCLK, + PRCMU_HSIRXCLK, + PRCMU_HDMICLK, + PRCMU_APEATCLK, + PRCMU_APETRACECLK, + PRCMU_MCDECLK, + PRCMU_IPI2CCLK, + PRCMU_DSIALTCLK, + PRCMU_DMACLK, + PRCMU_B2R2CLK, + PRCMU_TVCLK, + PRCMU_SSPCLK, + PRCMU_RNGCLK, + PRCMU_UICCCLK, + PRCMU_NUM_REG_CLOCKS, + PRCMU_SYSCLK = PRCMU_NUM_REG_CLOCKS, + PRCMU_TIMCLK, +}; + +/* + * Definitions for controlling ESRAM0 in deep sleep. + */ +#define ESRAM0_DEEP_SLEEP_STATE_OFF 1 +#define ESRAM0_DEEP_SLEEP_STATE_RET 2 + +#ifdef CONFIG_MFD_DB8500_PRCMU void __init prcmu_early_init(void); +int prcmu_set_display_clocks(void); +int prcmu_disable_dsipll(void); +int prcmu_enable_dsipll(void); +#else +static inline void __init prcmu_early_init(void) {} +#endif + +#ifdef CONFIG_MFD_DB8500_PRCMU + +int prcmu_set_rc_a2p(enum romcode_write); +enum romcode_read prcmu_get_rc_p2a(void); +enum ap_pwrst prcmu_get_xp70_current_state(void); +int prcmu_set_power_state(u8 state, bool keep_ulp_clk, bool keep_ap_pll); + +void prcmu_enable_wakeups(u32 wakeups); +static inline void prcmu_disable_wakeups(void) +{ + prcmu_enable_wakeups(0); +} + +void prcmu_config_abb_event_readout(u32 abb_events); +void prcmu_get_abb_event_buffer(void __iomem **buf); +int prcmu_set_arm_opp(u8 opp); +int prcmu_get_arm_opp(void); +bool prcmu_has_arm_maxopp(void); +bool prcmu_is_u8400(void); +int prcmu_set_ape_opp(u8 opp); +int prcmu_get_ape_opp(void); +int prcmu_request_ape_opp_100_voltage(bool enable); +int prcmu_release_usb_wakeup_state(void); +int prcmu_set_ddr_opp(u8 opp); +int prcmu_get_ddr_opp(void); +unsigned long prcmu_qos_get_cpufreq_opp_delay(void); +void prcmu_qos_set_cpufreq_opp_delay(unsigned long); +/* NOTE! Use regulator framework instead */ +int prcmu_set_hwacc(u16 hw_acc_dev, u8 state); +int prcmu_set_epod(u16 epod_id, u8 epod_state); +void prcmu_configure_auto_pm(struct prcmu_auto_pm_config *sleep, + struct prcmu_auto_pm_config *idle); +bool prcmu_is_auto_pm_enabled(void); + +int prcmu_config_clkout(u8 clkout, u8 source, u8 div); +int prcmu_request_clock(u8 clock, bool enable); +int prcmu_set_clock_divider(u8 clock, u8 divider); +int prcmu_config_esram0_deep_sleep(u8 state); +int prcmu_config_hotdog(u8 threshold); +int prcmu_config_hotmon(u8 low, u8 high); +int prcmu_start_temp_sense(u16 cycles32k); +int prcmu_stop_temp_sense(void); int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size); -int prcmu_set_ape_opp(enum prcmu_ape_opp opp); -int prcmu_set_cpu_opp(enum prcmu_cpu_opp opp); -int prcmu_set_ape_cpu_opps(enum prcmu_ape_opp ape_opp, - enum prcmu_cpu_opp cpu_opp); -enum prcmu_ape_opp prcmu_get_ape_opp(void); -int prcmu_get_cpu_opp(void); -bool prcmu_has_arm_maxopp(void); -#endif /* __MACH_PRCMU_H */ +void prcmu_ac_wake_req(void); +void prcmu_ac_sleep_req(void); +void prcmu_system_reset(u16 reset_code); +void prcmu_modem_reset(void); +bool prcmu_is_ac_wake_requested(void); +void prcmu_enable_spi2(void); +void prcmu_disable_spi2(void); + +#else /* !CONFIG_MFD_DB8500_PRCMU */ + +static inline int prcmu_set_rc_a2p(enum romcode_write code) +{ + return 0; +} + +static inline enum romcode_read prcmu_get_rc_p2a(void) +{ + return INIT; +} + +static inline enum ap_pwrst prcmu_get_xp70_current_state(void) +{ + return AP_EXECUTE; +} + +static inline int prcmu_set_power_state(u8 state, bool keep_ulp_clk, + bool keep_ap_pll) +{ + return 0; +} + +static inline void prcmu_enable_wakeups(u32 wakeups) {} + +static inline void prcmu_disable_wakeups(void) {} + +static inline void prcmu_config_abb_event_readout(u32 abb_events) {} + +static inline int prcmu_set_arm_opp(u8 opp) +{ + return 0; +} + +static inline int prcmu_get_arm_opp(void) +{ + return ARM_100_OPP; +} + +static bool prcmu_has_arm_maxopp(void) +{ + return false; +} + +static bool prcmu_is_u8400(void) +{ + return false; +} + +static inline int prcmu_set_ape_opp(u8 opp) +{ + return 0; +} + +static inline int prcmu_get_ape_opp(void) +{ + return APE_100_OPP; +} + +static inline int prcmu_request_ape_opp_100_voltage(bool enable) +{ + return 0; +} + +static inline int prcmu_release_usb_wakeup_state(void) +{ + return 0; +} + +static inline int prcmu_set_ddr_opp(u8 opp) +{ + return 0; +} + +static inline int prcmu_get_ddr_opp(void) +{ + return DDR_100_OPP; +} + +static inline unsigned long prcmu_qos_get_cpufreq_opp_delay(void) +{ + return 0; +} + +static inline void prcmu_qos_set_cpufreq_opp_delay(unsigned long n) {} + +static inline int prcmu_set_hwacc(u16 hw_acc_dev, u8 state) +{ + return 0; +} + +static inline void prcmu_configure_auto_pm(struct prcmu_auto_pm_config *sleep, + struct prcmu_auto_pm_config *idle) +{ +} + +static inline bool prcmu_is_auto_pm_enabled(void) +{ + return false; +} + +static inline int prcmu_config_clkout(u8 clkout, u8 source, u8 div) +{ + return 0; +} + +static inline int prcmu_request_clock(u8 clock, bool enable) +{ + return 0; +} + +static inline int prcmu_set_clock_divider(u8 clock, u8 divider) +{ + return 0; +} + +int prcmu_config_esram0_deep_sleep(u8 state) +{ + return 0; +} + +static inline int prcmu_config_hotdog(u8 threshold) +{ + return 0; +} + +static inline int prcmu_config_hotmon(u8 low, u8 high) +{ + return 0; +} + +static inline int prcmu_start_temp_sense(u16 cycles32k) +{ + return 0; +} + +static inline int prcmu_stop_temp_sense(void) +{ + return 0; +} + +static inline int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size) +{ + return -ENOSYS; +} + +static inline int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size) +{ + return -ENOSYS; +} + +static inline void prcmu_ac_wake_req(void) {} + +static inline void prcmu_ac_sleep_req(void) {} + +static inline void prcmu_system_reset(u16 reset_code) {} + +static inline void prcmu_modem_reset(void) {} + +static inline bool prcmu_is_ac_wake_requested(void) +{ + return false; +} + +#ifndef CONFIG_UX500_SOC_DB5500 +static inline int prcmu_set_display_clocks(void) +{ + return 0; +} + +static inline int prcmu_disable_dsipll(void) +{ + return 0; +} + +static inline int prcmu_enable_dsipll(void) +{ + return 0; +} +#endif + +static inline int prcmu_enable_spi2(void) +{ + return 0; +} + +static inline int prcmu_disable_spi2(void) +{ + return 0; +} + +#endif /* !CONFIG_MFD_DB8500_PRCMU */ + +#ifdef CONFIG_UX500_PRCMU_QOS_POWER +int prcmu_qos_requirement(int pm_qos_class); +int prcmu_qos_add_requirement(int pm_qos_class, char *name, s32 value); +int prcmu_qos_update_requirement(int pm_qos_class, char *name, s32 new_value); +void prcmu_qos_remove_requirement(int pm_qos_class, char *name); +int prcmu_qos_add_notifier(int prcmu_qos_class, + struct notifier_block *notifier); +int prcmu_qos_remove_notifier(int prcmu_qos_class, + struct notifier_block *notifier); +#else +static inline int prcmu_qos_requirement(int prcmu_qos_class) +{ + return 0; +} + +static inline int prcmu_qos_add_requirement(int prcmu_qos_class, + char *name, s32 value) +{ + return 0; +} + +static inline int prcmu_qos_update_requirement(int prcmu_qos_class, + char *name, s32 new_value) +{ + return 0; +} + +static inline void prcmu_qos_remove_requirement(int prcmu_qos_class, char *name) +{ +} + +static inline int prcmu_qos_add_notifier(int prcmu_qos_class, + struct notifier_block *notifier) +{ + return 0; +} +static inline int prcmu_qos_remove_notifier(int prcmu_qos_class, + struct notifier_block *notifier) +{ + return 0; +} + +#endif + +#endif /* __MFD_DB8500_PRCMU_H */ |