diff options
Diffstat (limited to 'kernel/power')
| -rw-r--r-- | kernel/power/Kconfig | 9 | ||||
| -rw-r--r-- | kernel/power/Makefile | 2 | ||||
| -rw-r--r-- | kernel/power/hibernate.c | 26 | ||||
| -rw-r--r-- | kernel/power/main.c | 55 | ||||
| -rw-r--r-- | kernel/power/nvs.c (renamed from kernel/power/hibernate_nvs.c) | 24 | ||||
| -rw-r--r-- | kernel/power/snapshot.c | 2 | ||||
| -rw-r--r-- | kernel/power/suspend.c | 19 | ||||
| -rw-r--r-- | kernel/power/swap.c | 6 |
8 files changed, 107 insertions, 36 deletions
diff --git a/kernel/power/Kconfig b/kernel/power/Kconfig index 5c36ea9d55d2..ca6066a6952e 100644 --- a/kernel/power/Kconfig +++ b/kernel/power/Kconfig @@ -99,9 +99,13 @@ config PM_SLEEP_ADVANCED_DEBUG depends on PM_ADVANCED_DEBUG default n +config SUSPEND_NVS + bool + config SUSPEND bool "Suspend to RAM and standby" depends on PM && ARCH_SUSPEND_POSSIBLE + select SUSPEND_NVS if HAS_IOMEM default y ---help--- Allow the system to enter sleep states in which main memory is @@ -130,13 +134,10 @@ config SUSPEND_FREEZER Turning OFF this setting is NOT recommended! If in doubt, say Y. -config HIBERNATION_NVS - bool - config HIBERNATION bool "Hibernation (aka 'suspend to disk')" depends on PM && SWAP && ARCH_HIBERNATION_POSSIBLE - select HIBERNATION_NVS if HAS_IOMEM + select SUSPEND_NVS if HAS_IOMEM ---help--- Enable the suspend to disk (STD) functionality, which is usually called "hibernation" in user interfaces. STD checkpoints the diff --git a/kernel/power/Makefile b/kernel/power/Makefile index 524e058dcf06..f9063c6b185d 100644 --- a/kernel/power/Makefile +++ b/kernel/power/Makefile @@ -10,6 +10,6 @@ obj-$(CONFIG_SUSPEND) += suspend.o obj-$(CONFIG_PM_TEST_SUSPEND) += suspend_test.o obj-$(CONFIG_HIBERNATION) += hibernate.o snapshot.o swap.o user.o \ block_io.o -obj-$(CONFIG_HIBERNATION_NVS) += hibernate_nvs.o +obj-$(CONFIG_SUSPEND_NVS) += nvs.o obj-$(CONFIG_MAGIC_SYSRQ) += poweroff.o diff --git a/kernel/power/hibernate.c b/kernel/power/hibernate.c index aa9e916da4d5..8dc31e02ae12 100644 --- a/kernel/power/hibernate.c +++ b/kernel/power/hibernate.c @@ -3,7 +3,7 @@ * * Copyright (c) 2003 Patrick Mochel * Copyright (c) 2003 Open Source Development Lab - * Copyright (c) 2004 Pavel Machek <pavel@suse.cz> + * Copyright (c) 2004 Pavel Machek <pavel@ucw.cz> * Copyright (c) 2009 Rafael J. Wysocki, Novell Inc. * * This file is released under the GPLv2. @@ -277,7 +277,7 @@ static int create_image(int platform_mode) goto Enable_irqs; } - if (hibernation_test(TEST_CORE)) + if (hibernation_test(TEST_CORE) || !pm_check_wakeup_events()) goto Power_up; in_suspend = 1; @@ -288,8 +288,10 @@ static int create_image(int platform_mode) error); /* Restore control flow magically appears here */ restore_processor_state(); - if (!in_suspend) + if (!in_suspend) { + events_check_enabled = false; platform_leave(platform_mode); + } Power_up: sysdev_resume(); @@ -328,7 +330,7 @@ int hibernation_snapshot(int platform_mode) error = platform_begin(platform_mode); if (error) - return error; + goto Close; /* Preallocate image memory before shutting down devices. */ error = hibernate_preallocate_memory(); @@ -511,18 +513,24 @@ int hibernation_platform_enter(void) local_irq_disable(); sysdev_suspend(PMSG_HIBERNATE); + if (!pm_check_wakeup_events()) { + error = -EAGAIN; + goto Power_up; + } + hibernation_ops->enter(); /* We should never get here */ while (1); - /* - * We don't need to reenable the nonboot CPUs or resume consoles, since - * the system is going to be halted anyway. - */ + Power_up: + sysdev_resume(); + local_irq_enable(); + enable_nonboot_cpus(); + Platform_finish: hibernation_ops->finish(); - dpm_suspend_noirq(PMSG_RESTORE); + dpm_resume_noirq(PMSG_RESTORE); Resume_devices: entering_platform_hibernation = false; diff --git a/kernel/power/main.c b/kernel/power/main.c index b58800b21fc0..62b0bc6e4983 100644 --- a/kernel/power/main.c +++ b/kernel/power/main.c @@ -204,6 +204,60 @@ static ssize_t state_store(struct kobject *kobj, struct kobj_attribute *attr, power_attr(state); +#ifdef CONFIG_PM_SLEEP +/* + * The 'wakeup_count' attribute, along with the functions defined in + * drivers/base/power/wakeup.c, provides a means by which wakeup events can be + * handled in a non-racy way. + * + * If a wakeup event occurs when the system is in a sleep state, it simply is + * woken up. In turn, if an event that would wake the system up from a sleep + * state occurs when it is undergoing a transition to that sleep state, the + * transition should be aborted. Moreover, if such an event occurs when the + * system is in the working state, an attempt to start a transition to the + * given sleep state should fail during certain period after the detection of + * the event. Using the 'state' attribute alone is not sufficient to satisfy + * these requirements, because a wakeup event may occur exactly when 'state' + * is being written to and may be delivered to user space right before it is + * frozen, so the event will remain only partially processed until the system is + * woken up by another event. In particular, it won't cause the transition to + * a sleep state to be aborted. + * + * This difficulty may be overcome if user space uses 'wakeup_count' before + * writing to 'state'. It first should read from 'wakeup_count' and store + * the read value. Then, after carrying out its own preparations for the system + * transition to a sleep state, it should write the stored value to + * 'wakeup_count'. If that fails, at least one wakeup event has occured since + * 'wakeup_count' was read and 'state' should not be written to. Otherwise, it + * is allowed to write to 'state', but the transition will be aborted if there + * are any wakeup events detected after 'wakeup_count' was written to. + */ + +static ssize_t wakeup_count_show(struct kobject *kobj, + struct kobj_attribute *attr, + char *buf) +{ + unsigned long val; + + return pm_get_wakeup_count(&val) ? sprintf(buf, "%lu\n", val) : -EINTR; +} + +static ssize_t wakeup_count_store(struct kobject *kobj, + struct kobj_attribute *attr, + const char *buf, size_t n) +{ + unsigned long val; + + if (sscanf(buf, "%lu", &val) == 1) { + if (pm_save_wakeup_count(val)) + return n; + } + return -EINVAL; +} + +power_attr(wakeup_count); +#endif /* CONFIG_PM_SLEEP */ + #ifdef CONFIG_PM_TRACE int pm_trace_enabled; @@ -236,6 +290,7 @@ static struct attribute * g[] = { #endif #ifdef CONFIG_PM_SLEEP &pm_async_attr.attr, + &wakeup_count_attr.attr, #ifdef CONFIG_PM_DEBUG &pm_test_attr.attr, #endif diff --git a/kernel/power/hibernate_nvs.c b/kernel/power/nvs.c index fdcad9ed5a7b..1836db60bbb6 100644 --- a/kernel/power/hibernate_nvs.c +++ b/kernel/power/nvs.c @@ -15,7 +15,7 @@ /* * Platforms, like ACPI, may want us to save some memory used by them during - * hibernation and to restore the contents of this memory during the subsequent + * suspend and to restore the contents of this memory during the subsequent * resume. The code below implements a mechanism allowing us to do that. */ @@ -30,7 +30,7 @@ struct nvs_page { static LIST_HEAD(nvs_list); /** - * hibernate_nvs_register - register platform NVS memory region to save + * suspend_nvs_register - register platform NVS memory region to save * @start - physical address of the region * @size - size of the region * @@ -38,7 +38,7 @@ static LIST_HEAD(nvs_list); * things so that the data from page-aligned addresses in this region will * be copied into separate RAM pages. */ -int hibernate_nvs_register(unsigned long start, unsigned long size) +int suspend_nvs_register(unsigned long start, unsigned long size) { struct nvs_page *entry, *next; @@ -68,9 +68,9 @@ int hibernate_nvs_register(unsigned long start, unsigned long size) } /** - * hibernate_nvs_free - free data pages allocated for saving NVS regions + * suspend_nvs_free - free data pages allocated for saving NVS regions */ -void hibernate_nvs_free(void) +void suspend_nvs_free(void) { struct nvs_page *entry; @@ -86,16 +86,16 @@ void hibernate_nvs_free(void) } /** - * hibernate_nvs_alloc - allocate memory necessary for saving NVS regions + * suspend_nvs_alloc - allocate memory necessary for saving NVS regions */ -int hibernate_nvs_alloc(void) +int suspend_nvs_alloc(void) { struct nvs_page *entry; list_for_each_entry(entry, &nvs_list, node) { entry->data = (void *)__get_free_page(GFP_KERNEL); if (!entry->data) { - hibernate_nvs_free(); + suspend_nvs_free(); return -ENOMEM; } } @@ -103,9 +103,9 @@ int hibernate_nvs_alloc(void) } /** - * hibernate_nvs_save - save NVS memory regions + * suspend_nvs_save - save NVS memory regions */ -void hibernate_nvs_save(void) +void suspend_nvs_save(void) { struct nvs_page *entry; @@ -119,12 +119,12 @@ void hibernate_nvs_save(void) } /** - * hibernate_nvs_restore - restore NVS memory regions + * suspend_nvs_restore - restore NVS memory regions * * This function is going to be called with interrupts disabled, so it * cannot iounmap the virtual addresses used to access the NVS region. */ -void hibernate_nvs_restore(void) +void suspend_nvs_restore(void) { struct nvs_page *entry; diff --git a/kernel/power/snapshot.c b/kernel/power/snapshot.c index 25ce010e9f8b..f6cd6faf84fd 100644 --- a/kernel/power/snapshot.c +++ b/kernel/power/snapshot.c @@ -3,7 +3,7 @@ * * This file provides system snapshot/restore functionality for swsusp. * - * Copyright (C) 1998-2005 Pavel Machek <pavel@suse.cz> + * Copyright (C) 1998-2005 Pavel Machek <pavel@ucw.cz> * Copyright (C) 2006 Rafael J. Wysocki <rjw@sisk.pl> * * This file is released under the GPLv2. diff --git a/kernel/power/suspend.c b/kernel/power/suspend.c index 56e7dbb8b996..7335952ee473 100644 --- a/kernel/power/suspend.c +++ b/kernel/power/suspend.c @@ -16,6 +16,12 @@ #include <linux/cpu.h> #include <linux/syscalls.h> #include <linux/gfp.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/mm.h> +#include <linux/slab.h> +#include <linux/suspend.h> #include "power.h" @@ -130,19 +136,19 @@ static int suspend_enter(suspend_state_t state) if (suspend_ops->prepare) { error = suspend_ops->prepare(); if (error) - return error; + goto Platform_finish; } error = dpm_suspend_noirq(PMSG_SUSPEND); if (error) { printk(KERN_ERR "PM: Some devices failed to power down\n"); - goto Platfrom_finish; + goto Platform_finish; } if (suspend_ops->prepare_late) { error = suspend_ops->prepare_late(); if (error) - goto Power_up_devices; + goto Platform_wake; } if (suspend_test(TEST_PLATFORM)) @@ -157,8 +163,10 @@ static int suspend_enter(suspend_state_t state) error = sysdev_suspend(PMSG_SUSPEND); if (!error) { - if (!suspend_test(TEST_CORE)) + if (!suspend_test(TEST_CORE) && pm_check_wakeup_events()) { error = suspend_ops->enter(state); + events_check_enabled = false; + } sysdev_resume(); } @@ -172,10 +180,9 @@ static int suspend_enter(suspend_state_t state) if (suspend_ops->wake) suspend_ops->wake(); - Power_up_devices: dpm_resume_noirq(PMSG_RESUME); - Platfrom_finish: + Platform_finish: if (suspend_ops->finish) suspend_ops->finish(); diff --git a/kernel/power/swap.c b/kernel/power/swap.c index b0bb21778391..e6a5bdf61a37 100644 --- a/kernel/power/swap.c +++ b/kernel/power/swap.c @@ -4,7 +4,7 @@ * This file provides functions for reading the suspend image from * and writing it to a swap partition. * - * Copyright (C) 1998,2001-2005 Pavel Machek <pavel@suse.cz> + * Copyright (C) 1998,2001-2005 Pavel Machek <pavel@ucw.cz> * Copyright (C) 2006 Rafael J. Wysocki <rjw@sisk.pl> * * This file is released under the GPLv2. @@ -32,7 +32,7 @@ /* * The swap map is a data structure used for keeping track of each page * written to a swap partition. It consists of many swap_map_page - * structures that contain each an array of MAP_PAGE_SIZE swap entries. + * structures that contain each an array of MAP_PAGE_ENTRIES swap entries. * These structures are stored on the swap and linked together with the * help of the .next_swap member. * @@ -148,7 +148,7 @@ sector_t alloc_swapdev_block(int swap) /** * free_all_swap_pages - free swap pages allocated for saving image data. - * It also frees the extents used to register which swap entres had been + * It also frees the extents used to register which swap entries had been * allocated. */ |