diff options
Diffstat (limited to 'lib/Kconfig.debug')
| -rw-r--r-- | lib/Kconfig.debug | 309 |
1 files changed, 107 insertions, 202 deletions
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug index e4587ebe52c7..c617b9d1d6cb 100644 --- a/lib/Kconfig.debug +++ b/lib/Kconfig.debug @@ -286,7 +286,7 @@ config DEBUG_FS write to these files. For detailed documentation on the debugfs API, see - Documentation/DocBook/filesystems. + Documentation/filesystems/. If unsure, say N. @@ -778,34 +778,52 @@ config DEBUG_SHIRQ menu "Debug Lockups and Hangs" config LOCKUP_DETECTOR - bool "Detect Hard and Soft Lockups" + bool + +config SOFTLOCKUP_DETECTOR + bool "Detect Soft Lockups" depends on DEBUG_KERNEL && !S390 + select LOCKUP_DETECTOR help Say Y here to enable the kernel to act as a watchdog to detect - hard and soft lockups. + soft lockups. Softlockups are bugs that cause the kernel to loop in kernel mode for more than 20 seconds, without giving other tasks a chance to run. The current stack trace is displayed upon detection and the system will stay locked up. +config HARDLOCKUP_DETECTOR_PERF + bool + select SOFTLOCKUP_DETECTOR + +# +# Enables a timestamp based low pass filter to compensate for perf based +# hard lockup detection which runs too fast due to turbo modes. +# +config HARDLOCKUP_CHECK_TIMESTAMP + bool + +# +# arch/ can define HAVE_HARDLOCKUP_DETECTOR_ARCH to provide their own hard +# lockup detector rather than the perf based detector. +# +config HARDLOCKUP_DETECTOR + bool "Detect Hard Lockups" + depends on DEBUG_KERNEL && !S390 + depends on HAVE_HARDLOCKUP_DETECTOR_PERF || HAVE_HARDLOCKUP_DETECTOR_ARCH + select LOCKUP_DETECTOR + select HARDLOCKUP_DETECTOR_PERF if HAVE_HARDLOCKUP_DETECTOR_PERF + select HARDLOCKUP_DETECTOR_ARCH if HAVE_HARDLOCKUP_DETECTOR_ARCH + help + Say Y here to enable the kernel to act as a watchdog to detect + hard lockups. + Hardlockups are bugs that cause the CPU to loop in kernel mode for more than 10 seconds, without letting other interrupts have a chance to run. The current stack trace is displayed upon detection and the system will stay locked up. - The overhead should be minimal. A periodic hrtimer runs to - generate interrupts and kick the watchdog task every 4 seconds. - An NMI is generated every 10 seconds or so to check for hardlockups. - - The frequency of hrtimer and NMI events and the soft and hard lockup - thresholds can be controlled through the sysctl watchdog_thresh. - -config HARDLOCKUP_DETECTOR - def_bool y - depends on LOCKUP_DETECTOR && !HAVE_NMI_WATCHDOG - depends on PERF_EVENTS && HAVE_PERF_EVENTS_NMI - config BOOTPARAM_HARDLOCKUP_PANIC bool "Panic (Reboot) On Hard Lockups" depends on HARDLOCKUP_DETECTOR @@ -826,7 +844,7 @@ config BOOTPARAM_HARDLOCKUP_PANIC_VALUE config BOOTPARAM_SOFTLOCKUP_PANIC bool "Panic (Reboot) On Soft Lockups" - depends on LOCKUP_DETECTOR + depends on SOFTLOCKUP_DETECTOR help Say Y here to enable the kernel to panic on "soft lockups", which are bugs that cause the kernel to loop in kernel @@ -843,7 +861,7 @@ config BOOTPARAM_SOFTLOCKUP_PANIC config BOOTPARAM_SOFTLOCKUP_PANIC_VALUE int - depends on LOCKUP_DETECTOR + depends on SOFTLOCKUP_DETECTOR range 0 1 default 0 if !BOOTPARAM_SOFTLOCKUP_PANIC default 1 if BOOTPARAM_SOFTLOCKUP_PANIC @@ -851,7 +869,7 @@ config BOOTPARAM_SOFTLOCKUP_PANIC_VALUE config DETECT_HUNG_TASK bool "Detect Hung Tasks" depends on DEBUG_KERNEL - default LOCKUP_DETECTOR + default SOFTLOCKUP_DETECTOR help Say Y here to enable the kernel to detect "hung tasks", which are bugs that cause the task to be stuck in @@ -1052,6 +1070,7 @@ config DEBUG_LOCK_ALLOC depends on DEBUG_KERNEL && TRACE_IRQFLAGS_SUPPORT && STACKTRACE_SUPPORT && LOCKDEP_SUPPORT select DEBUG_SPINLOCK select DEBUG_MUTEXES + select DEBUG_RT_MUTEXES if RT_MUTEXES select LOCKDEP help This feature will check whether any held lock (spinlock, rwlock, @@ -1067,6 +1086,7 @@ config PROVE_LOCKING select LOCKDEP select DEBUG_SPINLOCK select DEBUG_MUTEXES + select DEBUG_RT_MUTEXES if RT_MUTEXES select DEBUG_LOCK_ALLOC select TRACE_IRQFLAGS default n @@ -1121,6 +1141,7 @@ config LOCK_STAT select LOCKDEP select DEBUG_SPINLOCK select DEBUG_MUTEXES + select DEBUG_RT_MUTEXES if RT_MUTEXES select DEBUG_LOCK_ALLOC default n help @@ -1209,6 +1230,34 @@ config STACKTRACE It is also used by various kernel debugging features that require stack trace generation. +config WARN_ALL_UNSEEDED_RANDOM + bool "Warn for all uses of unseeded randomness" + default n + help + Some parts of the kernel contain bugs relating to their use of + cryptographically secure random numbers before it's actually possible + to generate those numbers securely. This setting ensures that these + flaws don't go unnoticed, by enabling a message, should this ever + occur. This will allow people with obscure setups to know when things + are going wrong, so that they might contact developers about fixing + it. + + Unfortunately, on some models of some architectures getting + a fully seeded CRNG is extremely difficult, and so this can + result in dmesg getting spammed for a surprisingly long + time. This is really bad from a security perspective, and + so architecture maintainers really need to do what they can + to get the CRNG seeded sooner after the system is booted. + However, since users can not do anything actionble to + address this, by default the kernel will issue only a single + warning for the first use of unseeded randomness. + + Say Y here if you want to receive warnings for all uses of + unseeded randomness. This will be of use primarily for + those developers interersted in improving the security of + Linux kernels running on their architecture (or + subarchitecture). + config DEBUG_KOBJECT bool "kobject debugging" depends on DEBUG_KERNEL @@ -1301,189 +1350,7 @@ config DEBUG_CREDENTIALS If unsure, say N. -menu "RCU Debugging" - -config PROVE_RCU - def_bool PROVE_LOCKING - -config PROVE_RCU_REPEATEDLY - bool "RCU debugging: don't disable PROVE_RCU on first splat" - depends on PROVE_RCU - default n - help - By itself, PROVE_RCU will disable checking upon issuing the - first warning (or "splat"). This feature prevents such - disabling, allowing multiple RCU-lockdep warnings to be printed - on a single reboot. - - Say Y to allow multiple RCU-lockdep warnings per boot. - - Say N if you are unsure. - -config SPARSE_RCU_POINTER - bool "RCU debugging: sparse-based checks for pointer usage" - default n - help - This feature enables the __rcu sparse annotation for - RCU-protected pointers. This annotation will cause sparse - to flag any non-RCU used of annotated pointers. This can be - helpful when debugging RCU usage. Please note that this feature - is not intended to enforce code cleanliness; it is instead merely - a debugging aid. - - Say Y to make sparse flag questionable use of RCU-protected pointers - - Say N if you are unsure. - -config TORTURE_TEST - tristate - default n - -config RCU_PERF_TEST - tristate "performance tests for RCU" - depends on DEBUG_KERNEL - select TORTURE_TEST - select SRCU - select TASKS_RCU - default n - help - This option provides a kernel module that runs performance - tests on the RCU infrastructure. The kernel module may be built - after the fact on the running kernel to be tested, if desired. - - Say Y here if you want RCU performance tests to be built into - the kernel. - Say M if you want the RCU performance tests to build as a module. - Say N if you are unsure. - -config RCU_TORTURE_TEST - tristate "torture tests for RCU" - depends on DEBUG_KERNEL - select TORTURE_TEST - select SRCU - select TASKS_RCU - default n - help - This option provides a kernel module that runs torture tests - on the RCU infrastructure. The kernel module may be built - after the fact on the running kernel to be tested, if desired. - - Say Y here if you want RCU torture tests to be built into - the kernel. - Say M if you want the RCU torture tests to build as a module. - Say N if you are unsure. - -config RCU_TORTURE_TEST_SLOW_PREINIT - bool "Slow down RCU grace-period pre-initialization to expose races" - depends on RCU_TORTURE_TEST - help - This option delays grace-period pre-initialization (the - propagation of CPU-hotplug changes up the rcu_node combining - tree) for a few jiffies between initializing each pair of - consecutive rcu_node structures. This helps to expose races - involving grace-period pre-initialization, in other words, it - makes your kernel less stable. It can also greatly increase - grace-period latency, especially on systems with large numbers - of CPUs. This is useful when torture-testing RCU, but in - almost no other circumstance. - - Say Y here if you want your system to crash and hang more often. - Say N if you want a sane system. - -config RCU_TORTURE_TEST_SLOW_PREINIT_DELAY - int "How much to slow down RCU grace-period pre-initialization" - range 0 5 - default 3 - depends on RCU_TORTURE_TEST_SLOW_PREINIT - help - This option specifies the number of jiffies to wait between - each rcu_node structure pre-initialization step. - -config RCU_TORTURE_TEST_SLOW_INIT - bool "Slow down RCU grace-period initialization to expose races" - depends on RCU_TORTURE_TEST - help - This option delays grace-period initialization for a few - jiffies between initializing each pair of consecutive - rcu_node structures. This helps to expose races involving - grace-period initialization, in other words, it makes your - kernel less stable. It can also greatly increase grace-period - latency, especially on systems with large numbers of CPUs. - This is useful when torture-testing RCU, but in almost no - other circumstance. - - Say Y here if you want your system to crash and hang more often. - Say N if you want a sane system. - -config RCU_TORTURE_TEST_SLOW_INIT_DELAY - int "How much to slow down RCU grace-period initialization" - range 0 5 - default 3 - depends on RCU_TORTURE_TEST_SLOW_INIT - help - This option specifies the number of jiffies to wait between - each rcu_node structure initialization. - -config RCU_TORTURE_TEST_SLOW_CLEANUP - bool "Slow down RCU grace-period cleanup to expose races" - depends on RCU_TORTURE_TEST - help - This option delays grace-period cleanup for a few jiffies - between cleaning up each pair of consecutive rcu_node - structures. This helps to expose races involving grace-period - cleanup, in other words, it makes your kernel less stable. - It can also greatly increase grace-period latency, especially - on systems with large numbers of CPUs. This is useful when - torture-testing RCU, but in almost no other circumstance. - - Say Y here if you want your system to crash and hang more often. - Say N if you want a sane system. - -config RCU_TORTURE_TEST_SLOW_CLEANUP_DELAY - int "How much to slow down RCU grace-period cleanup" - range 0 5 - default 3 - depends on RCU_TORTURE_TEST_SLOW_CLEANUP - help - This option specifies the number of jiffies to wait between - each rcu_node structure cleanup operation. - -config RCU_CPU_STALL_TIMEOUT - int "RCU CPU stall timeout in seconds" - depends on RCU_STALL_COMMON - range 3 300 - default 21 - help - If a given RCU grace period extends more than the specified - number of seconds, a CPU stall warning is printed. If the - RCU grace period persists, additional CPU stall warnings are - printed at more widely spaced intervals. - -config RCU_TRACE - bool "Enable tracing for RCU" - depends on DEBUG_KERNEL - default y if TREE_RCU - select TRACE_CLOCK - help - This option provides tracing in RCU which presents stats - in debugfs for debugging RCU implementation. It also enables - additional tracepoints for ftrace-style event tracing. - - Say Y here if you want to enable RCU tracing - Say N if you are unsure. - -config RCU_EQS_DEBUG - bool "Provide debugging asserts for adding NO_HZ support to an arch" - depends on DEBUG_KERNEL - help - This option provides consistency checks in RCU's handling of - NO_HZ. These checks have proven quite helpful in detecting - bugs in arch-specific NO_HZ code. - - Say N here if you need ultimate kernel/user switch latencies - Say Y if you are unsure - -endmenu # "RCU Debugging" +source "kernel/rcu/Kconfig.debug" config DEBUG_WQ_FORCE_RR_CPU bool "Force round-robin CPU selection for unbound work items" @@ -1773,7 +1640,7 @@ config RBTREE_TEST config INTERVAL_TREE_TEST tristate "Interval tree test" - depends on m && DEBUG_KERNEL + depends on DEBUG_KERNEL select INTERVAL_TREE help A benchmark measuring the performance of the interval tree library @@ -1964,6 +1831,17 @@ config TEST_FIRMWARE If unsure, say N. +config TEST_SYSCTL + tristate "sysctl test driver" + default n + depends on PROC_SYSCTL + help + This builds the "test_sysctl" module. This driver enables to test the + proc sysctl interfaces available to drivers safely without affecting + production knobs which might alter system functionality. + + If unsure, say N. + config TEST_UDELAY tristate "udelay test driver" default n @@ -2004,6 +1882,33 @@ config BUG_ON_DATA_CORRUPTION If unsure, say N. +config TEST_KMOD + tristate "kmod stress tester" + default n + depends on m + depends on BLOCK && (64BIT || LBDAF) # for XFS, BTRFS + depends on NETDEVICES && NET_CORE && INET # for TUN + select TEST_LKM + select XFS_FS + select TUN + select BTRFS_FS + help + Test the kernel's module loading mechanism: kmod. kmod implements + support to load modules using the Linux kernel's usermode helper. + This test provides a series of tests against kmod. + + Although technically you can either build test_kmod as a module or + into the kernel we disallow building it into the kernel since + it stress tests request_module() and this will very likely cause + some issues by taking over precious threads available from other + module load requests, ultimately this could be fatal. + + To run tests run: + + tools/testing/selftests/kmod/kmod.sh --help + + If unsure, say N. + source "samples/Kconfig" source "lib/Kconfig.kgdb" |