diff options
Diffstat (limited to 'net/mac80211/agg-tx.c')
| -rw-r--r-- | net/mac80211/agg-tx.c | 549 |
1 files changed, 311 insertions, 238 deletions
diff --git a/net/mac80211/agg-tx.c b/net/mac80211/agg-tx.c index d1b6664a2532..c893f236acea 100644 --- a/net/mac80211/agg-tx.c +++ b/net/mac80211/agg-tx.c @@ -6,7 +6,7 @@ * Copyright 2005-2006, Devicescape Software, Inc. * Copyright 2006-2007 Jiri Benc <jbenc@suse.cz> * Copyright 2007, Michael Wu <flamingice@sourmilk.net> - * Copyright 2007-2009, Intel Corporation + * Copyright 2007-2010, Intel Corporation * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -21,28 +21,39 @@ #include "wme.h" /** - * DOC: TX aggregation + * DOC: TX A-MPDU aggregation * * Aggregation on the TX side requires setting the hardware flag - * %IEEE80211_HW_AMPDU_AGGREGATION as well as, if present, the @ampdu_queues - * hardware parameter to the number of hardware AMPDU queues. If there are no - * hardware queues then the driver will (currently) have to do all frame - * buffering. + * %IEEE80211_HW_AMPDU_AGGREGATION. The driver will then be handed + * packets with a flag indicating A-MPDU aggregation. The driver + * or device is responsible for actually aggregating the frames, + * as well as deciding how many and which to aggregate. * - * When TX aggregation is started by some subsystem (usually the rate control - * algorithm would be appropriate) by calling the - * ieee80211_start_tx_ba_session() function, the driver will be notified via - * its @ampdu_action function, with the %IEEE80211_AMPDU_TX_START action. + * When TX aggregation is started by some subsystem (usually the rate + * control algorithm would be appropriate) by calling the + * ieee80211_start_tx_ba_session() function, the driver will be + * notified via its @ampdu_action function, with the + * %IEEE80211_AMPDU_TX_START action. * * In response to that, the driver is later required to call the - * ieee80211_start_tx_ba_cb() (or ieee80211_start_tx_ba_cb_irqsafe()) - * function, which will start the aggregation session. + * ieee80211_start_tx_ba_cb_irqsafe() function, which will really + * start the aggregation session after the peer has also responded. + * If the peer responds negatively, the session will be stopped + * again right away. Note that it is possible for the aggregation + * session to be stopped before the driver has indicated that it + * is done setting it up, in which case it must not indicate the + * setup completion. * - * Similarly, when the aggregation session is stopped by - * ieee80211_stop_tx_ba_session(), the driver's @ampdu_action function will - * be called with the action %IEEE80211_AMPDU_TX_STOP. In this case, the - * call must not fail, and the driver must later call ieee80211_stop_tx_ba_cb() - * (or ieee80211_stop_tx_ba_cb_irqsafe()). + * Also note that, since we also need to wait for a response from + * the peer, the driver is notified of the completion of the + * handshake by the %IEEE80211_AMPDU_TX_OPERATIONAL action to the + * @ampdu_action callback. + * + * Similarly, when the aggregation session is stopped by the peer + * or something calling ieee80211_stop_tx_ba_session(), the driver's + * @ampdu_action function will be called with the action + * %IEEE80211_AMPDU_TX_STOP. In this case, the call must not fail, + * and the driver must later call ieee80211_stop_tx_ba_cb_irqsafe(). */ static void ieee80211_send_addba_request(struct ieee80211_sub_if_data *sdata, @@ -125,25 +136,53 @@ void ieee80211_send_bar(struct ieee80211_sub_if_data *sdata, u8 *ra, u16 tid, u1 ieee80211_tx_skb(sdata, skb); } +static void kfree_tid_tx(struct rcu_head *rcu_head) +{ + struct tid_ampdu_tx *tid_tx = + container_of(rcu_head, struct tid_ampdu_tx, rcu_head); + + kfree(tid_tx); +} + int ___ieee80211_stop_tx_ba_session(struct sta_info *sta, u16 tid, enum ieee80211_back_parties initiator) { struct ieee80211_local *local = sta->local; + struct tid_ampdu_tx *tid_tx = sta->ampdu_mlme.tid_tx[tid]; int ret; - u8 *state; + + lockdep_assert_held(&sta->ampdu_mlme.mtx); + + if (!tid_tx) + return -ENOENT; + + spin_lock_bh(&sta->lock); + + if (test_bit(HT_AGG_STATE_WANT_START, &tid_tx->state)) { + /* not even started yet! */ + rcu_assign_pointer(sta->ampdu_mlme.tid_tx[tid], NULL); + spin_unlock_bh(&sta->lock); + call_rcu(&tid_tx->rcu_head, kfree_tid_tx); + return 0; + } + + spin_unlock_bh(&sta->lock); #ifdef CONFIG_MAC80211_HT_DEBUG printk(KERN_DEBUG "Tx BA session stop requested for %pM tid %u\n", sta->sta.addr, tid); #endif /* CONFIG_MAC80211_HT_DEBUG */ - state = &sta->ampdu_mlme.tid_state_tx[tid]; + set_bit(HT_AGG_STATE_STOPPING, &tid_tx->state); - if (*state == HT_AGG_STATE_OPERATIONAL) - sta->ampdu_mlme.addba_req_num[tid] = 0; + /* + * After this packets are no longer handed right through + * to the driver but are put onto tid_tx->pending instead, + * with locking to ensure proper access. + */ + clear_bit(HT_AGG_STATE_OPERATIONAL, &tid_tx->state); - *state = HT_AGG_STATE_REQ_STOP_BA_MSK | - (initiator << HT_AGG_STATE_INITIATOR_SHIFT); + tid_tx->stop_initiator = initiator; ret = drv_ampdu_action(local, sta->sdata, IEEE80211_AMPDU_TX_STOP, @@ -174,16 +213,14 @@ static void sta_addba_resp_timer_expired(unsigned long data) u16 tid = *(u8 *)data; struct sta_info *sta = container_of((void *)data, struct sta_info, timer_to_tid[tid]); - u8 *state; - - state = &sta->ampdu_mlme.tid_state_tx[tid]; + struct tid_ampdu_tx *tid_tx; /* check if the TID waits for addBA response */ - spin_lock_bh(&sta->lock); - if ((*state & (HT_ADDBA_REQUESTED_MSK | HT_ADDBA_RECEIVED_MSK | - HT_AGG_STATE_REQ_STOP_BA_MSK)) != - HT_ADDBA_REQUESTED_MSK) { - spin_unlock_bh(&sta->lock); + rcu_read_lock(); + tid_tx = rcu_dereference(sta->ampdu_mlme.tid_tx[tid]); + if (!tid_tx || + test_bit(HT_AGG_STATE_RESPONSE_RECEIVED, &tid_tx->state)) { + rcu_read_unlock(); #ifdef CONFIG_MAC80211_HT_DEBUG printk(KERN_DEBUG "timer expired on tid %d but we are not " "(or no longer) expecting addBA response there\n", @@ -196,8 +233,8 @@ static void sta_addba_resp_timer_expired(unsigned long data) printk(KERN_DEBUG "addBA response timer expired on tid %d\n", tid); #endif - ___ieee80211_stop_tx_ba_session(sta, tid, WLAN_BACK_INITIATOR); - spin_unlock_bh(&sta->lock); + ieee80211_stop_tx_ba_session(&sta->sta, tid); + rcu_read_unlock(); } static inline int ieee80211_ac_from_tid(int tid) @@ -205,14 +242,112 @@ static inline int ieee80211_ac_from_tid(int tid) return ieee802_1d_to_ac[tid & 7]; } +/* + * When multiple aggregation sessions on multiple stations + * are being created/destroyed simultaneously, we need to + * refcount the global queue stop caused by that in order + * to not get into a situation where one of the aggregation + * setup or teardown re-enables queues before the other is + * ready to handle that. + * + * These two functions take care of this issue by keeping + * a global "agg_queue_stop" refcount. + */ +static void __acquires(agg_queue) +ieee80211_stop_queue_agg(struct ieee80211_local *local, int tid) +{ + int queue = ieee80211_ac_from_tid(tid); + + if (atomic_inc_return(&local->agg_queue_stop[queue]) == 1) + ieee80211_stop_queue_by_reason( + &local->hw, queue, + IEEE80211_QUEUE_STOP_REASON_AGGREGATION); + __acquire(agg_queue); +} + +static void __releases(agg_queue) +ieee80211_wake_queue_agg(struct ieee80211_local *local, int tid) +{ + int queue = ieee80211_ac_from_tid(tid); + + if (atomic_dec_return(&local->agg_queue_stop[queue]) == 0) + ieee80211_wake_queue_by_reason( + &local->hw, queue, + IEEE80211_QUEUE_STOP_REASON_AGGREGATION); + __release(agg_queue); +} + +void ieee80211_tx_ba_session_handle_start(struct sta_info *sta, int tid) +{ + struct tid_ampdu_tx *tid_tx = sta->ampdu_mlme.tid_tx[tid]; + struct ieee80211_local *local = sta->local; + struct ieee80211_sub_if_data *sdata = sta->sdata; + u16 start_seq_num; + int ret; + + lockdep_assert_held(&sta->ampdu_mlme.mtx); + + /* + * While we're asking the driver about the aggregation, + * stop the AC queue so that we don't have to worry + * about frames that came in while we were doing that, + * which would require us to put them to the AC pending + * afterwards which just makes the code more complex. + */ + ieee80211_stop_queue_agg(local, tid); + + clear_bit(HT_AGG_STATE_WANT_START, &tid_tx->state); + + /* + * make sure no packets are being processed to get + * valid starting sequence number + */ + synchronize_net(); + + start_seq_num = sta->tid_seq[tid] >> 4; + + ret = drv_ampdu_action(local, sdata, IEEE80211_AMPDU_TX_START, + &sta->sta, tid, &start_seq_num); + if (ret) { +#ifdef CONFIG_MAC80211_HT_DEBUG + printk(KERN_DEBUG "BA request denied - HW unavailable for" + " tid %d\n", tid); +#endif + spin_lock_bh(&sta->lock); + rcu_assign_pointer(sta->ampdu_mlme.tid_tx[tid], NULL); + spin_unlock_bh(&sta->lock); + + ieee80211_wake_queue_agg(local, tid); + call_rcu(&tid_tx->rcu_head, kfree_tid_tx); + return; + } + + /* we can take packets again now */ + ieee80211_wake_queue_agg(local, tid); + + /* activate the timer for the recipient's addBA response */ + mod_timer(&tid_tx->addba_resp_timer, jiffies + ADDBA_RESP_INTERVAL); +#ifdef CONFIG_MAC80211_HT_DEBUG + printk(KERN_DEBUG "activated addBA response timer on tid %d\n", tid); +#endif + + spin_lock_bh(&sta->lock); + sta->ampdu_mlme.addba_req_num[tid]++; + spin_unlock_bh(&sta->lock); + + /* send AddBA request */ + ieee80211_send_addba_request(sdata, sta->sta.addr, tid, + tid_tx->dialog_token, start_seq_num, + 0x40, 5000); +} + int ieee80211_start_tx_ba_session(struct ieee80211_sta *pubsta, u16 tid) { struct sta_info *sta = container_of(pubsta, struct sta_info, sta); struct ieee80211_sub_if_data *sdata = sta->sdata; struct ieee80211_local *local = sdata->local; - u8 *state; + struct tid_ampdu_tx *tid_tx; int ret = 0; - u16 start_seq_num; trace_api_start_tx_ba_session(pubsta, tid); @@ -239,24 +374,15 @@ int ieee80211_start_tx_ba_session(struct ieee80211_sta *pubsta, u16 tid) sdata->vif.type != NL80211_IFTYPE_AP) return -EINVAL; - if (test_sta_flags(sta, WLAN_STA_DISASSOC)) { -#ifdef CONFIG_MAC80211_HT_DEBUG - printk(KERN_DEBUG "Disassociation is in progress. " - "Denying BA session request\n"); -#endif - return -EINVAL; - } - if (test_sta_flags(sta, WLAN_STA_BLOCK_BA)) { #ifdef CONFIG_MAC80211_HT_DEBUG - printk(KERN_DEBUG "Suspend in progress. " + printk(KERN_DEBUG "BA sessions blocked. " "Denying BA session request\n"); #endif return -EINVAL; } spin_lock_bh(&sta->lock); - spin_lock(&local->ampdu_lock); /* we have tried too many times, receiver does not want A-MPDU */ if (sta->ampdu_mlme.addba_req_num[tid] > HT_AGG_MAX_RETRIES) { @@ -264,9 +390,9 @@ int ieee80211_start_tx_ba_session(struct ieee80211_sta *pubsta, u16 tid) goto err_unlock_sta; } - state = &sta->ampdu_mlme.tid_state_tx[tid]; + tid_tx = sta->ampdu_mlme.tid_tx[tid]; /* check if the TID is not in aggregation flow already */ - if (*state != HT_AGG_STATE_IDLE) { + if (tid_tx) { #ifdef CONFIG_MAC80211_HT_DEBUG printk(KERN_DEBUG "BA request denied - session is not " "idle on tid %u\n", tid); @@ -275,96 +401,37 @@ int ieee80211_start_tx_ba_session(struct ieee80211_sta *pubsta, u16 tid) goto err_unlock_sta; } - /* - * While we're asking the driver about the aggregation, - * stop the AC queue so that we don't have to worry - * about frames that came in while we were doing that, - * which would require us to put them to the AC pending - * afterwards which just makes the code more complex. - */ - ieee80211_stop_queue_by_reason( - &local->hw, ieee80211_ac_from_tid(tid), - IEEE80211_QUEUE_STOP_REASON_AGGREGATION); - /* prepare A-MPDU MLME for Tx aggregation */ - sta->ampdu_mlme.tid_tx[tid] = - kmalloc(sizeof(struct tid_ampdu_tx), GFP_ATOMIC); - if (!sta->ampdu_mlme.tid_tx[tid]) { + tid_tx = kzalloc(sizeof(struct tid_ampdu_tx), GFP_ATOMIC); + if (!tid_tx) { #ifdef CONFIG_MAC80211_HT_DEBUG if (net_ratelimit()) printk(KERN_ERR "allocate tx mlme to tid %d failed\n", tid); #endif ret = -ENOMEM; - goto err_wake_queue; + goto err_unlock_sta; } - skb_queue_head_init(&sta->ampdu_mlme.tid_tx[tid]->pending); + skb_queue_head_init(&tid_tx->pending); + __set_bit(HT_AGG_STATE_WANT_START, &tid_tx->state); /* Tx timer */ - sta->ampdu_mlme.tid_tx[tid]->addba_resp_timer.function = - sta_addba_resp_timer_expired; - sta->ampdu_mlme.tid_tx[tid]->addba_resp_timer.data = - (unsigned long)&sta->timer_to_tid[tid]; - init_timer(&sta->ampdu_mlme.tid_tx[tid]->addba_resp_timer); - - /* Ok, the Addba frame hasn't been sent yet, but if the driver calls the - * call back right away, it must see that the flow has begun */ - *state |= HT_ADDBA_REQUESTED_MSK; - - start_seq_num = sta->tid_seq[tid] >> 4; - - ret = drv_ampdu_action(local, sdata, IEEE80211_AMPDU_TX_START, - pubsta, tid, &start_seq_num); + tid_tx->addba_resp_timer.function = sta_addba_resp_timer_expired; + tid_tx->addba_resp_timer.data = (unsigned long)&sta->timer_to_tid[tid]; + init_timer(&tid_tx->addba_resp_timer); - if (ret) { -#ifdef CONFIG_MAC80211_HT_DEBUG - printk(KERN_DEBUG "BA request denied - HW unavailable for" - " tid %d\n", tid); -#endif /* CONFIG_MAC80211_HT_DEBUG */ - *state = HT_AGG_STATE_IDLE; - goto err_free; - } - - /* Driver vetoed or OKed, but we can take packets again now */ - ieee80211_wake_queue_by_reason( - &local->hw, ieee80211_ac_from_tid(tid), - IEEE80211_QUEUE_STOP_REASON_AGGREGATION); - - spin_unlock(&local->ampdu_lock); - - /* prepare tid data */ + /* assign a dialog token */ sta->ampdu_mlme.dialog_token_allocator++; - sta->ampdu_mlme.tid_tx[tid]->dialog_token = - sta->ampdu_mlme.dialog_token_allocator; - sta->ampdu_mlme.tid_tx[tid]->ssn = start_seq_num; + tid_tx->dialog_token = sta->ampdu_mlme.dialog_token_allocator; - spin_unlock_bh(&sta->lock); + /* finally, assign it to the array */ + rcu_assign_pointer(sta->ampdu_mlme.tid_tx[tid], tid_tx); - /* send AddBA request */ - ieee80211_send_addba_request(sdata, pubsta->addr, tid, - sta->ampdu_mlme.tid_tx[tid]->dialog_token, - sta->ampdu_mlme.tid_tx[tid]->ssn, - 0x40, 5000); - sta->ampdu_mlme.addba_req_num[tid]++; - /* activate the timer for the recipient's addBA response */ - sta->ampdu_mlme.tid_tx[tid]->addba_resp_timer.expires = - jiffies + ADDBA_RESP_INTERVAL; - add_timer(&sta->ampdu_mlme.tid_tx[tid]->addba_resp_timer); -#ifdef CONFIG_MAC80211_HT_DEBUG - printk(KERN_DEBUG "activated addBA response timer on tid %d\n", tid); -#endif - return 0; - - err_free: - kfree(sta->ampdu_mlme.tid_tx[tid]); - sta->ampdu_mlme.tid_tx[tid] = NULL; - err_wake_queue: - ieee80211_wake_queue_by_reason( - &local->hw, ieee80211_ac_from_tid(tid), - IEEE80211_QUEUE_STOP_REASON_AGGREGATION); + ieee80211_queue_work(&local->hw, &sta->ampdu_mlme.work); + + /* this flow continues off the work */ err_unlock_sta: - spin_unlock(&local->ampdu_lock); spin_unlock_bh(&sta->lock); return ret; } @@ -372,69 +439,65 @@ EXPORT_SYMBOL(ieee80211_start_tx_ba_session); /* * splice packets from the STA's pending to the local pending, - * requires a call to ieee80211_agg_splice_finish and holding - * local->ampdu_lock across both calls. + * requires a call to ieee80211_agg_splice_finish later */ -static void ieee80211_agg_splice_packets(struct ieee80211_local *local, - struct sta_info *sta, u16 tid) +static void __acquires(agg_queue) +ieee80211_agg_splice_packets(struct ieee80211_local *local, + struct tid_ampdu_tx *tid_tx, u16 tid) { + int queue = ieee80211_ac_from_tid(tid); unsigned long flags; - u16 queue = ieee80211_ac_from_tid(tid); - - ieee80211_stop_queue_by_reason( - &local->hw, queue, - IEEE80211_QUEUE_STOP_REASON_AGGREGATION); - if (!(sta->ampdu_mlme.tid_state_tx[tid] & HT_ADDBA_REQUESTED_MSK)) - return; + ieee80211_stop_queue_agg(local, tid); - if (WARN(!sta->ampdu_mlme.tid_tx[tid], - "TID %d gone but expected when splicing aggregates from" - "the pending queue\n", tid)) + if (WARN(!tid_tx, "TID %d gone but expected when splicing aggregates" + " from the pending queue\n", tid)) return; - if (!skb_queue_empty(&sta->ampdu_mlme.tid_tx[tid]->pending)) { + if (!skb_queue_empty(&tid_tx->pending)) { spin_lock_irqsave(&local->queue_stop_reason_lock, flags); /* copy over remaining packets */ - skb_queue_splice_tail_init( - &sta->ampdu_mlme.tid_tx[tid]->pending, - &local->pending[queue]); + skb_queue_splice_tail_init(&tid_tx->pending, + &local->pending[queue]); spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags); } } -static void ieee80211_agg_splice_finish(struct ieee80211_local *local, - struct sta_info *sta, u16 tid) +static void __releases(agg_queue) +ieee80211_agg_splice_finish(struct ieee80211_local *local, u16 tid) { - u16 queue = ieee80211_ac_from_tid(tid); - - ieee80211_wake_queue_by_reason( - &local->hw, queue, - IEEE80211_QUEUE_STOP_REASON_AGGREGATION); + ieee80211_wake_queue_agg(local, tid); } -/* caller must hold sta->lock */ static void ieee80211_agg_tx_operational(struct ieee80211_local *local, struct sta_info *sta, u16 tid) { + lockdep_assert_held(&sta->ampdu_mlme.mtx); + #ifdef CONFIG_MAC80211_HT_DEBUG printk(KERN_DEBUG "Aggregation is on for tid %d\n", tid); #endif - spin_lock(&local->ampdu_lock); - ieee80211_agg_splice_packets(local, sta, tid); - /* - * NB: we rely on sta->lock being taken in the TX - * processing here when adding to the pending queue, - * otherwise we could only change the state of the - * session to OPERATIONAL _here_. - */ - ieee80211_agg_splice_finish(local, sta, tid); - spin_unlock(&local->ampdu_lock); - drv_ampdu_action(local, sta->sdata, IEEE80211_AMPDU_TX_OPERATIONAL, &sta->sta, tid, NULL); + + /* + * synchronize with TX path, while splicing the TX path + * should block so it won't put more packets onto pending. + */ + spin_lock_bh(&sta->lock); + + ieee80211_agg_splice_packets(local, sta->ampdu_mlme.tid_tx[tid], tid); + /* + * Now mark as operational. This will be visible + * in the TX path, and lets it go lock-free in + * the common case. + */ + set_bit(HT_AGG_STATE_OPERATIONAL, &sta->ampdu_mlme.tid_tx[tid]->state); + ieee80211_agg_splice_finish(local, tid); + + spin_unlock_bh(&sta->lock); } void ieee80211_start_tx_ba_cb(struct ieee80211_vif *vif, u8 *ra, u16 tid) @@ -442,7 +505,7 @@ void ieee80211_start_tx_ba_cb(struct ieee80211_vif *vif, u8 *ra, u16 tid) struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); struct ieee80211_local *local = sdata->local; struct sta_info *sta; - u8 *state; + struct tid_ampdu_tx *tid_tx; trace_api_start_tx_ba_cb(sdata, ra, tid); @@ -454,42 +517,36 @@ void ieee80211_start_tx_ba_cb(struct ieee80211_vif *vif, u8 *ra, u16 tid) return; } - rcu_read_lock(); + mutex_lock(&local->sta_mtx); sta = sta_info_get(sdata, ra); if (!sta) { - rcu_read_unlock(); + mutex_unlock(&local->sta_mtx); #ifdef CONFIG_MAC80211_HT_DEBUG printk(KERN_DEBUG "Could not find station: %pM\n", ra); #endif return; } - state = &sta->ampdu_mlme.tid_state_tx[tid]; - spin_lock_bh(&sta->lock); + mutex_lock(&sta->ampdu_mlme.mtx); + tid_tx = sta->ampdu_mlme.tid_tx[tid]; - if (WARN_ON(!(*state & HT_ADDBA_REQUESTED_MSK))) { + if (WARN_ON(!tid_tx)) { #ifdef CONFIG_MAC80211_HT_DEBUG - printk(KERN_DEBUG "addBA was not requested yet, state is %d\n", - *state); + printk(KERN_DEBUG "addBA was not requested!\n"); #endif - spin_unlock_bh(&sta->lock); - rcu_read_unlock(); - return; + goto unlock; } - if (WARN_ON(*state & HT_ADDBA_DRV_READY_MSK)) - goto out; - - *state |= HT_ADDBA_DRV_READY_MSK; + if (WARN_ON(test_and_set_bit(HT_AGG_STATE_DRV_READY, &tid_tx->state))) + goto unlock; - if (*state == HT_AGG_STATE_OPERATIONAL) + if (test_bit(HT_AGG_STATE_RESPONSE_RECEIVED, &tid_tx->state)) ieee80211_agg_tx_operational(local, sta, tid); - out: - spin_unlock_bh(&sta->lock); - rcu_read_unlock(); + unlock: + mutex_unlock(&sta->ampdu_mlme.mtx); + mutex_unlock(&local->sta_mtx); } -EXPORT_SYMBOL(ieee80211_start_tx_ba_cb); void ieee80211_start_tx_ba_cb_irqsafe(struct ieee80211_vif *vif, const u8 *ra, u16 tid) @@ -510,33 +567,24 @@ void ieee80211_start_tx_ba_cb_irqsafe(struct ieee80211_vif *vif, ra_tid = (struct ieee80211_ra_tid *) &skb->cb; memcpy(&ra_tid->ra, ra, ETH_ALEN); ra_tid->tid = tid; - ra_tid->vif = vif; - skb->pkt_type = IEEE80211_ADDBA_MSG; - skb_queue_tail(&local->skb_queue, skb); - tasklet_schedule(&local->tasklet); + skb->pkt_type = IEEE80211_SDATA_QUEUE_AGG_START; + skb_queue_tail(&sdata->skb_queue, skb); + ieee80211_queue_work(&local->hw, &sdata->work); } EXPORT_SYMBOL(ieee80211_start_tx_ba_cb_irqsafe); int __ieee80211_stop_tx_ba_session(struct sta_info *sta, u16 tid, enum ieee80211_back_parties initiator) { - u8 *state; int ret; - /* check if the TID is in aggregation */ - state = &sta->ampdu_mlme.tid_state_tx[tid]; - spin_lock_bh(&sta->lock); - - if (*state != HT_AGG_STATE_OPERATIONAL) { - ret = -ENOENT; - goto unlock; - } + mutex_lock(&sta->ampdu_mlme.mtx); ret = ___ieee80211_stop_tx_ba_session(sta, tid, initiator); - unlock: - spin_unlock_bh(&sta->lock); + mutex_unlock(&sta->ampdu_mlme.mtx); + return ret; } @@ -545,6 +593,8 @@ int ieee80211_stop_tx_ba_session(struct ieee80211_sta *pubsta, u16 tid) struct sta_info *sta = container_of(pubsta, struct sta_info, sta); struct ieee80211_sub_if_data *sdata = sta->sdata; struct ieee80211_local *local = sdata->local; + struct tid_ampdu_tx *tid_tx; + int ret = 0; trace_api_stop_tx_ba_session(pubsta, tid); @@ -554,7 +604,26 @@ int ieee80211_stop_tx_ba_session(struct ieee80211_sta *pubsta, u16 tid) if (tid >= STA_TID_NUM) return -EINVAL; - return __ieee80211_stop_tx_ba_session(sta, tid, WLAN_BACK_INITIATOR); + spin_lock_bh(&sta->lock); + tid_tx = sta->ampdu_mlme.tid_tx[tid]; + + if (!tid_tx) { + ret = -ENOENT; + goto unlock; + } + + if (test_bit(HT_AGG_STATE_STOPPING, &tid_tx->state)) { + /* already in progress stopping it */ + ret = 0; + goto unlock; + } + + set_bit(HT_AGG_STATE_WANT_STOP, &tid_tx->state); + ieee80211_queue_work(&local->hw, &sta->ampdu_mlme.work); + + unlock: + spin_unlock_bh(&sta->lock); + return ret; } EXPORT_SYMBOL(ieee80211_stop_tx_ba_session); @@ -563,7 +632,7 @@ void ieee80211_stop_tx_ba_cb(struct ieee80211_vif *vif, u8 *ra, u8 tid) struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); struct ieee80211_local *local = sdata->local; struct sta_info *sta; - u8 *state; + struct tid_ampdu_tx *tid_tx; trace_api_stop_tx_ba_cb(sdata, ra, tid); @@ -580,51 +649,56 @@ void ieee80211_stop_tx_ba_cb(struct ieee80211_vif *vif, u8 *ra, u8 tid) ra, tid); #endif /* CONFIG_MAC80211_HT_DEBUG */ - rcu_read_lock(); + mutex_lock(&local->sta_mtx); + sta = sta_info_get(sdata, ra); if (!sta) { #ifdef CONFIG_MAC80211_HT_DEBUG printk(KERN_DEBUG "Could not find station: %pM\n", ra); #endif - rcu_read_unlock(); - return; + goto unlock; } - state = &sta->ampdu_mlme.tid_state_tx[tid]; - /* NOTE: no need to use sta->lock in this state check, as - * ieee80211_stop_tx_ba_session will let only one stop call to - * pass through per sta/tid - */ - if ((*state & HT_AGG_STATE_REQ_STOP_BA_MSK) == 0) { + mutex_lock(&sta->ampdu_mlme.mtx); + spin_lock_bh(&sta->lock); + tid_tx = sta->ampdu_mlme.tid_tx[tid]; + + if (!tid_tx || !test_bit(HT_AGG_STATE_STOPPING, &tid_tx->state)) { #ifdef CONFIG_MAC80211_HT_DEBUG printk(KERN_DEBUG "unexpected callback to A-MPDU stop\n"); #endif - rcu_read_unlock(); - return; + goto unlock_sta; } - if (*state & HT_AGG_STATE_INITIATOR_MSK) + if (tid_tx->stop_initiator == WLAN_BACK_INITIATOR) ieee80211_send_delba(sta->sdata, ra, tid, WLAN_BACK_INITIATOR, WLAN_REASON_QSTA_NOT_USE); - spin_lock_bh(&sta->lock); - spin_lock(&local->ampdu_lock); + /* + * When we get here, the TX path will not be lockless any more wrt. + * aggregation, since the OPERATIONAL bit has long been cleared. + * Thus it will block on getting the lock, if it occurs. So if we + * stop the queue now, we will not get any more packets, and any + * that might be being processed will wait for us here, thereby + * guaranteeing that no packets go to the tid_tx pending queue any + * more. + */ - ieee80211_agg_splice_packets(local, sta, tid); + ieee80211_agg_splice_packets(local, tid_tx, tid); - *state = HT_AGG_STATE_IDLE; - /* from now on packets are no longer put onto sta->pending */ - kfree(sta->ampdu_mlme.tid_tx[tid]); - sta->ampdu_mlme.tid_tx[tid] = NULL; + /* future packets must not find the tid_tx struct any more */ + rcu_assign_pointer(sta->ampdu_mlme.tid_tx[tid], NULL); - ieee80211_agg_splice_finish(local, sta, tid); + ieee80211_agg_splice_finish(local, tid); - spin_unlock(&local->ampdu_lock); - spin_unlock_bh(&sta->lock); + call_rcu(&tid_tx->rcu_head, kfree_tid_tx); - rcu_read_unlock(); + unlock_sta: + spin_unlock_bh(&sta->lock); + mutex_unlock(&sta->ampdu_mlme.mtx); + unlock: + mutex_unlock(&local->sta_mtx); } -EXPORT_SYMBOL(ieee80211_stop_tx_ba_cb); void ieee80211_stop_tx_ba_cb_irqsafe(struct ieee80211_vif *vif, const u8 *ra, u16 tid) @@ -645,11 +719,10 @@ void ieee80211_stop_tx_ba_cb_irqsafe(struct ieee80211_vif *vif, ra_tid = (struct ieee80211_ra_tid *) &skb->cb; memcpy(&ra_tid->ra, ra, ETH_ALEN); ra_tid->tid = tid; - ra_tid->vif = vif; - skb->pkt_type = IEEE80211_DELBA_MSG; - skb_queue_tail(&local->skb_queue, skb); - tasklet_schedule(&local->tasklet); + skb->pkt_type = IEEE80211_SDATA_QUEUE_AGG_STOP; + skb_queue_tail(&sdata->skb_queue, skb); + ieee80211_queue_work(&local->hw, &sdata->work); } EXPORT_SYMBOL(ieee80211_stop_tx_ba_cb_irqsafe); @@ -659,40 +732,40 @@ void ieee80211_process_addba_resp(struct ieee80211_local *local, struct ieee80211_mgmt *mgmt, size_t len) { + struct tid_ampdu_tx *tid_tx; u16 capab, tid; - u8 *state; capab = le16_to_cpu(mgmt->u.action.u.addba_resp.capab); tid = (capab & IEEE80211_ADDBA_PARAM_TID_MASK) >> 2; - state = &sta->ampdu_mlme.tid_state_tx[tid]; - - spin_lock_bh(&sta->lock); + mutex_lock(&sta->ampdu_mlme.mtx); - if (!(*state & HT_ADDBA_REQUESTED_MSK)) + tid_tx = sta->ampdu_mlme.tid_tx[tid]; + if (!tid_tx) goto out; - if (mgmt->u.action.u.addba_resp.dialog_token != - sta->ampdu_mlme.tid_tx[tid]->dialog_token) { + if (mgmt->u.action.u.addba_resp.dialog_token != tid_tx->dialog_token) { #ifdef CONFIG_MAC80211_HT_DEBUG printk(KERN_DEBUG "wrong addBA response token, tid %d\n", tid); -#endif /* CONFIG_MAC80211_HT_DEBUG */ +#endif goto out; } - del_timer(&sta->ampdu_mlme.tid_tx[tid]->addba_resp_timer); + del_timer(&tid_tx->addba_resp_timer); #ifdef CONFIG_MAC80211_HT_DEBUG printk(KERN_DEBUG "switched off addBA timer for tid %d\n", tid); -#endif /* CONFIG_MAC80211_HT_DEBUG */ +#endif if (le16_to_cpu(mgmt->u.action.u.addba_resp.status) == WLAN_STATUS_SUCCESS) { - u8 curstate = *state; - - *state |= HT_ADDBA_RECEIVED_MSK; + if (test_and_set_bit(HT_AGG_STATE_RESPONSE_RECEIVED, + &tid_tx->state)) { + /* ignore duplicate response */ + goto out; + } - if (*state != curstate && *state == HT_AGG_STATE_OPERATIONAL) + if (test_bit(HT_AGG_STATE_DRV_READY, &tid_tx->state)) ieee80211_agg_tx_operational(local, sta, tid); sta->ampdu_mlme.addba_req_num[tid] = 0; @@ -701,5 +774,5 @@ void ieee80211_process_addba_resp(struct ieee80211_local *local, } out: - spin_unlock_bh(&sta->lock); + mutex_unlock(&sta->ampdu_mlme.mtx); } |