diff options
Diffstat (limited to 'net/mac80211/ieee80211.c')
| -rw-r--r-- | net/mac80211/ieee80211.c | 984 |
1 files changed, 726 insertions, 258 deletions
diff --git a/net/mac80211/ieee80211.c b/net/mac80211/ieee80211.c index 8e586390a2ef..aaa5480e204a 100644 --- a/net/mac80211/ieee80211.c +++ b/net/mac80211/ieee80211.c @@ -26,6 +26,7 @@ #include "ieee80211_i.h" #include "ieee80211_rate.h" +#include "mesh.h" #include "wep.h" #include "wme.h" #include "aes_ccm.h" @@ -67,9 +68,19 @@ static void ieee80211_configure_filter(struct ieee80211_local *local) new_flags |= FIF_ALLMULTI; if (local->monitors) - new_flags |= FIF_CONTROL | - FIF_OTHER_BSS | - FIF_BCN_PRBRESP_PROMISC; + new_flags |= FIF_BCN_PRBRESP_PROMISC; + + if (local->fif_fcsfail) + new_flags |= FIF_FCSFAIL; + + if (local->fif_plcpfail) + new_flags |= FIF_PLCPFAIL; + + if (local->fif_control) + new_flags |= FIF_CONTROL; + + if (local->fif_other_bss) + new_flags |= FIF_OTHER_BSS; changed_flags = local->filter_flags ^ new_flags; @@ -128,9 +139,15 @@ static void ieee80211_master_set_multicast_list(struct net_device *dev) static int ieee80211_change_mtu(struct net_device *dev, int new_mtu) { + int meshhdrlen; + struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); + + meshhdrlen = (sdata->vif.type == IEEE80211_IF_TYPE_MESH_POINT) ? 5 : 0; + /* FIX: what would be proper limits for MTU? * This interface uses 802.3 frames. */ - if (new_mtu < 256 || new_mtu > IEEE80211_MAX_DATA_LEN - 24 - 6) { + if (new_mtu < 256 || + new_mtu > IEEE80211_MAX_DATA_LEN - 24 - 6 - meshhdrlen) { printk(KERN_WARNING "%s: invalid MTU %d\n", dev->name, new_mtu); return -EINVAL; @@ -166,6 +183,7 @@ static int ieee80211_open(struct net_device *dev) struct ieee80211_if_init_conf conf; int res; bool need_hw_reconfig = 0; + struct sta_info *sta; sdata = IEEE80211_DEV_TO_SUB_IF(dev); @@ -173,8 +191,52 @@ static int ieee80211_open(struct net_device *dev) list_for_each_entry(nsdata, &local->interfaces, list) { struct net_device *ndev = nsdata->dev; - if (ndev != dev && ndev != local->mdev && netif_running(ndev) && - compare_ether_addr(dev->dev_addr, ndev->dev_addr) == 0) { + if (ndev != dev && ndev != local->mdev && netif_running(ndev)) { + /* + * Allow only a single IBSS interface to be up at any + * time. This is restricted because beacon distribution + * cannot work properly if both are in the same IBSS. + * + * To remove this restriction we'd have to disallow them + * from setting the same SSID on different IBSS interfaces + * belonging to the same hardware. Then, however, we're + * faced with having to adopt two different TSF timers... + */ + if (sdata->vif.type == IEEE80211_IF_TYPE_IBSS && + nsdata->vif.type == IEEE80211_IF_TYPE_IBSS) + return -EBUSY; + + /* + * Disallow multiple IBSS/STA mode interfaces. + * + * This is a technical restriction, it is possible although + * most likely not IEEE 802.11 compliant to have multiple + * STAs with just a single hardware (the TSF timer will not + * be adjusted properly.) + * + * However, because mac80211 uses the master device's BSS + * information for each STA/IBSS interface, doing this will + * currently corrupt that BSS information completely, unless, + * a not very useful case, both STAs are associated to the + * same BSS. + * + * To remove this restriction, the BSS information needs to + * be embedded in the STA/IBSS mode sdata instead of using + * the master device's BSS structure. + */ + if ((sdata->vif.type == IEEE80211_IF_TYPE_STA || + sdata->vif.type == IEEE80211_IF_TYPE_IBSS) && + (nsdata->vif.type == IEEE80211_IF_TYPE_STA || + nsdata->vif.type == IEEE80211_IF_TYPE_IBSS)) + return -EBUSY; + + /* + * The remaining checks are only performed for interfaces + * with the same MAC address. + */ + if (compare_ether_addr(dev->dev_addr, ndev->dev_addr)) + continue; + /* * check whether it may have the same address */ @@ -186,8 +248,7 @@ static int ieee80211_open(struct net_device *dev) * can only add VLANs to enabled APs */ if (sdata->vif.type == IEEE80211_IF_TYPE_VLAN && - nsdata->vif.type == IEEE80211_IF_TYPE_AP && - netif_running(nsdata->dev)) + nsdata->vif.type == IEEE80211_IF_TYPE_AP) sdata->u.vlan.ap = nsdata; } } @@ -196,6 +257,20 @@ static int ieee80211_open(struct net_device *dev) case IEEE80211_IF_TYPE_WDS: if (is_zero_ether_addr(sdata->u.wds.remote_addr)) return -ENOLINK; + + /* Create STA entry for the WDS peer */ + sta = sta_info_alloc(sdata, sdata->u.wds.remote_addr, + GFP_KERNEL); + if (!sta) + return -ENOMEM; + + sta->flags |= WLAN_STA_AUTHORIZED; + + res = sta_info_insert(sta); + if (res) { + /* STA has been freed */ + return res; + } break; case IEEE80211_IF_TYPE_VLAN: if (!sdata->u.vlan.ap) @@ -205,6 +280,7 @@ static int ieee80211_open(struct net_device *dev) case IEEE80211_IF_TYPE_STA: case IEEE80211_IF_TYPE_MNTR: case IEEE80211_IF_TYPE_IBSS: + case IEEE80211_IF_TYPE_MESH_POINT: /* no special treatment */ break; case IEEE80211_IF_TYPE_INVALID: @@ -229,15 +305,28 @@ static int ieee80211_open(struct net_device *dev) /* no need to tell driver */ break; case IEEE80211_IF_TYPE_MNTR: + if (sdata->u.mntr_flags & MONITOR_FLAG_COOK_FRAMES) { + local->cooked_mntrs++; + break; + } + /* must be before the call to ieee80211_configure_filter */ local->monitors++; - if (local->monitors == 1) { - netif_tx_lock_bh(local->mdev); - ieee80211_configure_filter(local); - netif_tx_unlock_bh(local->mdev); - + if (local->monitors == 1) local->hw.conf.flags |= IEEE80211_CONF_RADIOTAP; - } + + if (sdata->u.mntr_flags & MONITOR_FLAG_FCSFAIL) + local->fif_fcsfail++; + if (sdata->u.mntr_flags & MONITOR_FLAG_PLCPFAIL) + local->fif_plcpfail++; + if (sdata->u.mntr_flags & MONITOR_FLAG_CONTROL) + local->fif_control++; + if (sdata->u.mntr_flags & MONITOR_FLAG_OTHER_BSS) + local->fif_other_bss++; + + netif_tx_lock_bh(local->mdev); + ieee80211_configure_filter(local); + netif_tx_unlock_bh(local->mdev); break; case IEEE80211_IF_TYPE_STA: case IEEE80211_IF_TYPE_IBSS: @@ -305,24 +394,46 @@ static int ieee80211_open(struct net_device *dev) static int ieee80211_stop(struct net_device *dev) { - struct ieee80211_sub_if_data *sdata; - struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); + struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); + struct ieee80211_local *local = sdata->local; struct ieee80211_if_init_conf conf; struct sta_info *sta; - int i; - sdata = IEEE80211_DEV_TO_SUB_IF(dev); + /* + * Stop TX on this interface first. + */ + netif_stop_queue(dev); - list_for_each_entry(sta, &local->sta_list, list) { - if (sta->dev == dev) - for (i = 0; i < STA_TID_NUM; i++) - ieee80211_sta_stop_rx_ba_session(sta->dev, - sta->addr, i, - WLAN_BACK_RECIPIENT, - WLAN_REASON_QSTA_LEAVE_QBSS); + /* + * Now delete all active aggregation sessions. + */ + rcu_read_lock(); + + list_for_each_entry_rcu(sta, &local->sta_list, list) { + if (sta->sdata == sdata) + ieee80211_sta_tear_down_BA_sessions(dev, sta->addr); } - netif_stop_queue(dev); + rcu_read_unlock(); + + /* + * Remove all stations associated with this interface. + * + * This must be done before calling ops->remove_interface() + * because otherwise we can later invoke ops->sta_notify() + * whenever the STAs are removed, and that invalidates driver + * assumptions about always getting a vif pointer that is valid + * (because if we remove a STA after ops->remove_interface() + * the driver will have removed the vif info already!) + * + * We could relax this and only unlink the stations from the + * hash table and list but keep them on a per-sdata list that + * will be inserted back again when the interface is brought + * up again, but I don't currently see a use case for that, + * except with WDS which gets a STA entry created when it is + * brought up. + */ + sta_info_flush(local, sdata); /* * Don't count this interface for promisc/allmulti while it @@ -364,15 +475,29 @@ static int ieee80211_stop(struct net_device *dev) /* no need to tell driver */ break; case IEEE80211_IF_TYPE_MNTR: - local->monitors--; - if (local->monitors == 0) { - netif_tx_lock_bh(local->mdev); - ieee80211_configure_filter(local); - netif_tx_unlock_bh(local->mdev); + if (sdata->u.mntr_flags & MONITOR_FLAG_COOK_FRAMES) { + local->cooked_mntrs--; + break; + } + local->monitors--; + if (local->monitors == 0) local->hw.conf.flags &= ~IEEE80211_CONF_RADIOTAP; - } + + if (sdata->u.mntr_flags & MONITOR_FLAG_FCSFAIL) + local->fif_fcsfail--; + if (sdata->u.mntr_flags & MONITOR_FLAG_PLCPFAIL) + local->fif_plcpfail--; + if (sdata->u.mntr_flags & MONITOR_FLAG_CONTROL) + local->fif_control--; + if (sdata->u.mntr_flags & MONITOR_FLAG_OTHER_BSS) + local->fif_other_bss--; + + netif_tx_lock_bh(local->mdev); + ieee80211_configure_filter(local); + netif_tx_unlock_bh(local->mdev); break; + case IEEE80211_IF_TYPE_MESH_POINT: case IEEE80211_IF_TYPE_STA: case IEEE80211_IF_TYPE_IBSS: sdata->u.sta.state = IEEE80211_DISABLED; @@ -426,6 +551,359 @@ static int ieee80211_stop(struct net_device *dev) return 0; } +int ieee80211_start_tx_ba_session(struct ieee80211_hw *hw, u8 *ra, u16 tid) +{ + struct ieee80211_local *local = hw_to_local(hw); + struct sta_info *sta; + struct ieee80211_sub_if_data *sdata; + u16 start_seq_num = 0; + u8 *state; + int ret; + DECLARE_MAC_BUF(mac); + + if (tid >= STA_TID_NUM) + return -EINVAL; + +#ifdef CONFIG_MAC80211_HT_DEBUG + printk(KERN_DEBUG "Open BA session requested for %s tid %u\n", + print_mac(mac, ra), tid); +#endif /* CONFIG_MAC80211_HT_DEBUG */ + + rcu_read_lock(); + + sta = sta_info_get(local, ra); + if (!sta) { + printk(KERN_DEBUG "Could not find the station\n"); + rcu_read_unlock(); + return -ENOENT; + } + + spin_lock_bh(&sta->ampdu_mlme.ampdu_tx); + + /* we have tried too many times, receiver does not want A-MPDU */ + if (sta->ampdu_mlme.addba_req_num[tid] > HT_AGG_MAX_RETRIES) { + ret = -EBUSY; + goto start_ba_exit; + } + + state = &sta->ampdu_mlme.tid_state_tx[tid]; + /* check if the TID is not in aggregation flow already */ + if (*state != HT_AGG_STATE_IDLE) { +#ifdef CONFIG_MAC80211_HT_DEBUG + printk(KERN_DEBUG "BA request denied - session is not " + "idle on tid %u\n", tid); +#endif /* CONFIG_MAC80211_HT_DEBUG */ + ret = -EAGAIN; + goto start_ba_exit; + } + + /* prepare A-MPDU MLME for Tx aggregation */ + sta->ampdu_mlme.tid_tx[tid] = + kmalloc(sizeof(struct tid_ampdu_tx), GFP_ATOMIC); + if (!sta->ampdu_mlme.tid_tx[tid]) { + if (net_ratelimit()) + printk(KERN_ERR "allocate tx mlme to tid %d failed\n", + tid); + ret = -ENOMEM; + goto start_ba_exit; + } + /* Tx timer */ + sta->ampdu_mlme.tid_tx[tid]->addba_resp_timer.function = + sta_addba_resp_timer_expired; + sta->ampdu_mlme.tid_tx[tid]->addba_resp_timer.data = + (unsigned long)&sta->timer_to_tid[tid]; + init_timer(&sta->ampdu_mlme.tid_tx[tid]->addba_resp_timer); + + /* ensure that TX flow won't interrupt us + * until the end of the call to requeue function */ + spin_lock_bh(&local->mdev->queue_lock); + + /* create a new queue for this aggregation */ + ret = ieee80211_ht_agg_queue_add(local, sta, tid); + + /* case no queue is available to aggregation + * don't switch to aggregation */ + if (ret) { +#ifdef CONFIG_MAC80211_HT_DEBUG + printk(KERN_DEBUG "BA request denied - queue unavailable for" + " tid %d\n", tid); +#endif /* CONFIG_MAC80211_HT_DEBUG */ + goto start_ba_err; + } + sdata = sta->sdata; + + /* Ok, the Addba frame hasn't been sent yet, but if the driver calls the + * call back right away, it must see that the flow has begun */ + *state |= HT_ADDBA_REQUESTED_MSK; + + if (local->ops->ampdu_action) + ret = local->ops->ampdu_action(hw, IEEE80211_AMPDU_TX_START, + ra, tid, &start_seq_num); + + if (ret) { + /* No need to requeue the packets in the agg queue, since we + * held the tx lock: no packet could be enqueued to the newly + * allocated queue */ + ieee80211_ht_agg_queue_remove(local, sta, tid, 0); +#ifdef CONFIG_MAC80211_HT_DEBUG + printk(KERN_DEBUG "BA request denied - HW unavailable for" + " tid %d\n", tid); +#endif /* CONFIG_MAC80211_HT_DEBUG */ + *state = HT_AGG_STATE_IDLE; + goto start_ba_err; + } + + /* Will put all the packets in the new SW queue */ + ieee80211_requeue(local, ieee802_1d_to_ac[tid]); + spin_unlock_bh(&local->mdev->queue_lock); + + /* send an addBA request */ + sta->ampdu_mlme.dialog_token_allocator++; + sta->ampdu_mlme.tid_tx[tid]->dialog_token = + sta->ampdu_mlme.dialog_token_allocator; + sta->ampdu_mlme.tid_tx[tid]->ssn = start_seq_num; + + ieee80211_send_addba_request(sta->sdata->dev, ra, tid, + sta->ampdu_mlme.tid_tx[tid]->dialog_token, + sta->ampdu_mlme.tid_tx[tid]->ssn, + 0x40, 5000); + + /* activate the timer for the recipient's addBA response */ + sta->ampdu_mlme.tid_tx[tid]->addba_resp_timer.expires = + jiffies + ADDBA_RESP_INTERVAL; + add_timer(&sta->ampdu_mlme.tid_tx[tid]->addba_resp_timer); + printk(KERN_DEBUG "activated addBA response timer on tid %d\n", tid); + goto start_ba_exit; + +start_ba_err: + kfree(sta->ampdu_mlme.tid_tx[tid]); + sta->ampdu_mlme.tid_tx[tid] = NULL; + spin_unlock_bh(&local->mdev->queue_lock); + ret = -EBUSY; +start_ba_exit: + spin_unlock_bh(&sta->ampdu_mlme.ampdu_tx); + rcu_read_unlock(); + return ret; +} +EXPORT_SYMBOL(ieee80211_start_tx_ba_session); + +int ieee80211_stop_tx_ba_session(struct ieee80211_hw *hw, + u8 *ra, u16 tid, + enum ieee80211_back_parties initiator) +{ + struct ieee80211_local *local = hw_to_local(hw); + struct sta_info *sta; + u8 *state; + int ret = 0; + DECLARE_MAC_BUF(mac); + + if (tid >= STA_TID_NUM) + return -EINVAL; + +#ifdef CONFIG_MAC80211_HT_DEBUG + printk(KERN_DEBUG "Stop a BA session requested for %s tid %u\n", + print_mac(mac, ra), tid); +#endif /* CONFIG_MAC80211_HT_DEBUG */ + + rcu_read_lock(); + sta = sta_info_get(local, ra); + if (!sta) { + rcu_read_unlock(); + return -ENOENT; + } + + /* check if the TID is in aggregation */ + state = &sta->ampdu_mlme.tid_state_tx[tid]; + spin_lock_bh(&sta->ampdu_mlme.ampdu_tx); + + if (*state != HT_AGG_STATE_OPERATIONAL) { +#ifdef CONFIG_MAC80211_HT_DEBUG + printk(KERN_DEBUG "Try to stop Tx aggregation on" + " non active TID\n"); +#endif /* CONFIG_MAC80211_HT_DEBUG */ + ret = -ENOENT; + goto stop_BA_exit; + } + + ieee80211_stop_queue(hw, sta->tid_to_tx_q[tid]); + + *state = HT_AGG_STATE_REQ_STOP_BA_MSK | + (initiator << HT_AGG_STATE_INITIATOR_SHIFT); + + if (local->ops->ampdu_action) + ret = local->ops->ampdu_action(hw, IEEE80211_AMPDU_TX_STOP, + ra, tid, NULL); + + /* case HW denied going back to legacy */ + if (ret) { + WARN_ON(ret != -EBUSY); + *state = HT_AGG_STATE_OPERATIONAL; + ieee80211_wake_queue(hw, sta->tid_to_tx_q[tid]); + goto stop_BA_exit; + } + +stop_BA_exit: + spin_unlock_bh(&sta->ampdu_mlme.ampdu_tx); + rcu_read_unlock(); + return ret; +} +EXPORT_SYMBOL(ieee80211_stop_tx_ba_session); + +void ieee80211_start_tx_ba_cb(struct ieee80211_hw *hw, u8 *ra, u16 tid) +{ + struct ieee80211_local *local = hw_to_local(hw); + struct sta_info *sta; + u8 *state; + DECLARE_MAC_BUF(mac); + + if (tid >= STA_TID_NUM) { + printk(KERN_DEBUG "Bad TID value: tid = %d (>= %d)\n", + tid, STA_TID_NUM); + return; + } + + rcu_read_lock(); + sta = sta_info_get(local, ra); + if (!sta) { + rcu_read_unlock(); + printk(KERN_DEBUG "Could not find station: %s\n", + print_mac(mac, ra)); + return; + } + + state = &sta->ampdu_mlme.tid_state_tx[tid]; + spin_lock_bh(&sta->ampdu_mlme.ampdu_tx); + + if (!(*state & HT_ADDBA_REQUESTED_MSK)) { + printk(KERN_DEBUG "addBA was not requested yet, state is %d\n", + *state); + spin_unlock_bh(&sta->ampdu_mlme.ampdu_tx); + rcu_read_unlock(); + return; + } + + WARN_ON_ONCE(*state & HT_ADDBA_DRV_READY_MSK); + + *state |= HT_ADDBA_DRV_READY_MSK; + + if (*state == HT_AGG_STATE_OPERATIONAL) { + printk(KERN_DEBUG "Aggregation is on for tid %d \n", tid); + ieee80211_wake_queue(hw, sta->tid_to_tx_q[tid]); + } + spin_unlock_bh(&sta->ampdu_mlme.ampdu_tx); + rcu_read_unlock(); +} +EXPORT_SYMBOL(ieee80211_start_tx_ba_cb); + +void ieee80211_stop_tx_ba_cb(struct ieee80211_hw *hw, u8 *ra, u8 tid) +{ + struct ieee80211_local *local = hw_to_local(hw); + struct sta_info *sta; + u8 *state; + int agg_queue; + DECLARE_MAC_BUF(mac); + + if (tid >= STA_TID_NUM) { + printk(KERN_DEBUG "Bad TID value: tid = %d (>= %d)\n", + tid, STA_TID_NUM); + return; + } + + printk(KERN_DEBUG "Stop a BA session requested on DA %s tid %d\n", + print_mac(mac, ra), tid); + + rcu_read_lock(); + sta = sta_info_get(local, ra); + if (!sta) { + printk(KERN_DEBUG "Could not find station: %s\n", + print_mac(mac, ra)); + rcu_read_unlock(); + return; + } + state = &sta->ampdu_mlme.tid_state_tx[tid]; + + spin_lock_bh(&sta->ampdu_mlme.ampdu_tx); + if ((*state & HT_AGG_STATE_REQ_STOP_BA_MSK) == 0) { + printk(KERN_DEBUG "unexpected callback to A-MPDU stop\n"); + spin_unlock_bh(&sta->ampdu_mlme.ampdu_tx); + rcu_read_unlock(); + return; + } + + if (*state & HT_AGG_STATE_INITIATOR_MSK) + ieee80211_send_delba(sta->sdata->dev, ra, tid, + WLAN_BACK_INITIATOR, WLAN_REASON_QSTA_NOT_USE); + + agg_queue = sta->tid_to_tx_q[tid]; + + /* avoid ordering issues: we are the only one that can modify + * the content of the qdiscs */ + spin_lock_bh(&local->mdev->queue_lock); + /* remove the queue for this aggregation */ + ieee80211_ht_agg_queue_remove(local, sta, tid, 1); + spin_unlock_bh(&local->mdev->queue_lock); + + /* we just requeued the all the frames that were in the removed + * queue, and since we might miss a softirq we do netif_schedule. + * ieee80211_wake_queue is not used here as this queue is not + * necessarily stopped */ + netif_schedule(local->mdev); + *state = HT_AGG_STATE_IDLE; + sta->ampdu_mlme.addba_req_num[tid] = 0; + kfree(sta->ampdu_mlme.tid_tx[tid]); + sta->ampdu_mlme.tid_tx[tid] = NULL; + spin_unlock_bh(&sta->ampdu_mlme.ampdu_tx); + + rcu_read_unlock(); +} +EXPORT_SYMBOL(ieee80211_stop_tx_ba_cb); + +void ieee80211_start_tx_ba_cb_irqsafe(struct ieee80211_hw *hw, + const u8 *ra, u16 tid) +{ + struct ieee80211_local *local = hw_to_local(hw); + struct ieee80211_ra_tid *ra_tid; + struct sk_buff *skb = dev_alloc_skb(0); + + if (unlikely(!skb)) { + if (net_ratelimit()) + printk(KERN_WARNING "%s: Not enough memory, " + "dropping start BA session", skb->dev->name); + return; + } + ra_tid = (struct ieee80211_ra_tid *) &skb->cb; + memcpy(&ra_tid->ra, ra, ETH_ALEN); + ra_tid->tid = tid; + + skb->pkt_type = IEEE80211_ADDBA_MSG; + skb_queue_tail(&local->skb_queue, skb); + tasklet_schedule(&local->tasklet); +} +EXPORT_SYMBOL(ieee80211_start_tx_ba_cb_irqsafe); + +void ieee80211_stop_tx_ba_cb_irqsafe(struct ieee80211_hw *hw, + const u8 *ra, u16 tid) +{ + struct ieee80211_local *local = hw_to_local(hw); + struct ieee80211_ra_tid *ra_tid; + struct sk_buff *skb = dev_alloc_skb(0); + + if (unlikely(!skb)) { + if (net_ratelimit()) + printk(KERN_WARNING "%s: Not enough memory, " + "dropping stop BA session", skb->dev->name); + return; + } + ra_tid = (struct ieee80211_ra_tid *) &skb->cb; + memcpy(&ra_tid->ra, ra, ETH_ALEN); + ra_tid->tid = tid; + + skb->pkt_type = IEEE80211_DELBA_MSG; + skb_queue_tail(&local->skb_queue, skb); + tasklet_schedule(&local->tasklet); +} +EXPORT_SYMBOL(ieee80211_stop_tx_ba_cb_irqsafe); + static void ieee80211_set_multicast_list(struct net_device *dev) { struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); @@ -477,41 +955,6 @@ void ieee80211_if_setup(struct net_device *dev) dev->destructor = ieee80211_if_free; } -/* WDS specialties */ - -int ieee80211_if_update_wds(struct net_device *dev, u8 *remote_addr) -{ - struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); - struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); - struct sta_info *sta; - DECLARE_MAC_BUF(mac); - - if (compare_ether_addr(remote_addr, sdata->u.wds.remote_addr) == 0) - return 0; - - /* Create STA entry for the new peer */ - sta = sta_info_add(local, dev, remote_addr, GFP_KERNEL); - if (!sta) - return -ENOMEM; - sta_info_put(sta); - - /* Remove STA entry for the old peer */ - sta = sta_info_get(local, sdata->u.wds.remote_addr); - if (sta) { - sta_info_free(sta); - sta_info_put(sta); - } else { - printk(KERN_DEBUG "%s: could not find STA entry for WDS link " - "peer %s\n", - dev->name, print_mac(mac, sdata->u.wds.remote_addr)); - } - - /* Update WDS link data */ - memcpy(&sdata->u.wds.remote_addr, remote_addr, ETH_ALEN); - - return 0; -} - /* everything else */ static int __ieee80211_if_config(struct net_device *dev, @@ -532,6 +975,9 @@ static int __ieee80211_if_config(struct net_device *dev, conf.bssid = sdata->u.sta.bssid; conf.ssid = sdata->u.sta.ssid; conf.ssid_len = sdata->u.sta.ssid_len; + } else if (ieee80211_vif_is_mesh(&sdata->vif)) { + conf.beacon = beacon; + ieee80211_start_mesh(dev); } else if (sdata->vif.type == IEEE80211_IF_TYPE_AP) { conf.ssid = sdata->u.ap.ssid; conf.ssid_len = sdata->u.ap.ssid_len; @@ -544,6 +990,11 @@ static int __ieee80211_if_config(struct net_device *dev, int ieee80211_if_config(struct net_device *dev) { + struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); + struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); + if (sdata->vif.type == IEEE80211_IF_TYPE_MESH_POINT && + (local->hw.flags & IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE)) + return ieee80211_if_config_beacon(dev); return __ieee80211_if_config(dev, NULL, NULL); } @@ -565,37 +1016,28 @@ int ieee80211_if_config_beacon(struct net_device *dev) int ieee80211_hw_config(struct ieee80211_local *local) { - struct ieee80211_hw_mode *mode; struct ieee80211_channel *chan; int ret = 0; - if (local->sta_sw_scanning) { + if (local->sta_sw_scanning) chan = local->scan_channel; - mode = local->scan_hw_mode; - } else { + else chan = local->oper_channel; - mode = local->oper_hw_mode; - } - local->hw.conf.channel = chan->chan; - local->hw.conf.channel_val = chan->val; - if (!local->hw.conf.power_level) { - local->hw.conf.power_level = chan->power_level; - } else { - local->hw.conf.power_level = min(chan->power_level, - local->hw.conf.power_level); - } - local->hw.conf.freq = chan->freq; - local->hw.conf.phymode = mode->mode; - local->hw.conf.antenna_max = chan->antenna_max; - local->hw.conf.chan = chan; - local->hw.conf.mode = mode; + local->hw.conf.channel = chan; + + if (!local->hw.conf.power_level) + local->hw.conf.power_level = chan->max_power; + else + local->hw.conf.power_level = min(chan->max_power, + local->hw.conf.power_level); + + local->hw.conf.max_antenna_gain = chan->max_antenna_gain; #ifdef CONFIG_MAC80211_VERBOSE_DEBUG - printk(KERN_DEBUG "HW CONFIG: channel=%d freq=%d " - "phymode=%d\n", local->hw.conf.channel, local->hw.conf.freq, - local->hw.conf.phymode); -#endif /* CONFIG_MAC80211_VERBOSE_DEBUG */ + printk(KERN_DEBUG "%s: HW CONFIG: freq=%d\n", + wiphy_name(local->hw.wiphy), chan->center_freq); +#endif if (local->open_count) ret = local->ops->config(local_to_hw(local), &local->hw.conf); @@ -613,11 +1055,13 @@ int ieee80211_hw_config_ht(struct ieee80211_local *local, int enable_ht, struct ieee80211_ht_bss_info *req_bss_cap) { struct ieee80211_conf *conf = &local->hw.conf; - struct ieee80211_hw_mode *mode = conf->mode; + struct ieee80211_supported_band *sband; int i; + sband = local->hw.wiphy->bands[conf->channel->band]; + /* HT is not supported */ - if (!mode->ht_info.ht_supported) { + if (!sband->ht_info.ht_supported) { conf->flags &= ~IEEE80211_CONF_SUPPORT_HT_MODE; return -EOPNOTSUPP; } @@ -627,17 +1071,17 @@ int ieee80211_hw_config_ht(struct ieee80211_local *local, int enable_ht, conf->flags &= ~IEEE80211_CONF_SUPPORT_HT_MODE; } else { conf->flags |= IEEE80211_CONF_SUPPORT_HT_MODE; - conf->ht_conf.cap = req_ht_cap->cap & mode->ht_info.cap; + conf->ht_conf.cap = req_ht_cap->cap & sband->ht_info.cap; conf->ht_conf.cap &= ~(IEEE80211_HT_CAP_MIMO_PS); conf->ht_conf.cap |= - mode->ht_info.cap & IEEE80211_HT_CAP_MIMO_PS; + sband->ht_info.cap & IEEE80211_HT_CAP_MIMO_PS; conf->ht_bss_conf.primary_channel = req_bss_cap->primary_channel; conf->ht_bss_conf.bss_cap = req_bss_cap->bss_cap; conf->ht_bss_conf.bss_op_mode = req_bss_cap->bss_op_mode; for (i = 0; i < SUPP_MCS_SET_LEN; i++) conf->ht_conf.supp_mcs_set[i] = - mode->ht_info.supp_mcs_set[i] & + sband->ht_info.supp_mcs_set[i] & req_ht_cap->supp_mcs_set[i]; /* In STA mode, this gives us indication @@ -725,6 +1169,7 @@ static void ieee80211_tasklet_handler(unsigned long data) struct sk_buff *skb; struct ieee80211_rx_status rx_status; struct ieee80211_tx_status *tx_status; + struct ieee80211_ra_tid *ra_tid; while ((skb = skb_dequeue(&local->skb_queue)) || (skb = skb_dequeue(&local->skb_queue_unreliable))) { @@ -745,6 +1190,18 @@ static void ieee80211_tasklet_handler(unsigned long data) skb, tx_status); kfree(tx_status); break; + case IEEE80211_DELBA_MSG: + ra_tid = (struct ieee80211_ra_tid *) &skb->cb; + ieee80211_stop_tx_ba_cb(local_to_hw(local), + ra_tid->ra, ra_tid->tid); + dev_kfree_skb(skb); + break; + case IEEE80211_ADDBA_MSG: + ra_tid = (struct ieee80211_ra_tid *) &skb->cb; + ieee80211_start_tx_ba_cb(local_to_hw(local), + ra_tid->ra, ra_tid->tid); + dev_kfree_skb(skb); + break ; default: /* should never get here! */ printk(KERN_ERR "%s: Unknown message type (%d)\n", wiphy_name(local->hw.wiphy), skb->pkt_type); @@ -822,6 +1279,77 @@ no_key: } } +static void ieee80211_handle_filtered_frame(struct ieee80211_local *local, + struct sta_info *sta, + struct sk_buff *skb, + struct ieee80211_tx_status *status) +{ + sta->tx_filtered_count++; + + /* + * Clear the TX filter mask for this STA when sending the next + * packet. If the STA went to power save mode, this will happen + * happen when it wakes up for the next time. + */ + sta->flags |= WLAN_STA_CLEAR_PS_FILT; + + /* + * This code races in the following way: + * + * (1) STA sends frame indicating it will go to sleep and does so + * (2) hardware/firmware adds STA to filter list, passes frame up + * (3) hardware/firmware processes TX fifo and suppresses a frame + * (4) we get TX status before having processed the frame and + * knowing that the STA has gone to sleep. + * + * This is actually quite unlikely even when both those events are + * processed from interrupts coming in quickly after one another or + * even at the same time because we queue both TX status events and + * RX frames to be processed by a tasklet and process them in the + * same order that they were received or TX status last. Hence, there + * is no race as long as the frame RX is processed before the next TX + * status, which drivers can ensure, see below. + * + * Note that this can only happen if the hardware or firmware can + * actually add STAs to the filter list, if this is done by the + * driver in response to set_tim() (which will only reduce the race + * this whole filtering tries to solve, not completely solve it) + * this situation cannot happen. + * + * To completely solve this race drivers need to make sure that they + * (a) don't mix the irq-safe/not irq-safe TX status/RX processing + * functions and + * (b) always process RX events before TX status events if ordering + * can be unknown, for example with different interrupt status + * bits. + */ + if (sta->flags & WLAN_STA_PS && + skb_queue_len(&sta->tx_filtered) < STA_MAX_TX_BUFFER) { + ieee80211_remove_tx_extra(local, sta->key, skb, + &status->control); + skb_queue_tail(&sta->tx_filtered, skb); + return; + } + + if (!(sta->flags & WLAN_STA_PS) && + !(status->control.flags & IEEE80211_TXCTL_REQUEUE)) { + /* Software retry the packet once */ + status->control.flags |= IEEE80211_TXCTL_REQUEUE; + ieee80211_remove_tx_extra(local, sta->key, skb, + &status->control); + dev_queue_xmit(skb); + return; + } + + if (net_ratelimit()) + printk(KERN_DEBUG "%s: dropped TX filtered frame, " + "queue_len=%d PS=%d @%lu\n", + wiphy_name(local->hw.wiphy), + skb_queue_len(&sta->tx_filtered), + !!(sta->flags & WLAN_STA_PS), jiffies); + dev_kfree_skb(skb); +} + void ieee80211_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb, struct ieee80211_tx_status *status) { @@ -831,7 +1359,7 @@ void ieee80211_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb, u16 frag, type; struct ieee80211_tx_status_rtap_hdr *rthdr; struct ieee80211_sub_if_data *sdata; - int monitors; + struct net_device *prev_dev = NULL; if (!status) { printk(KERN_ERR @@ -841,18 +1369,24 @@ void ieee80211_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb, return; } + rcu_read_lock(); + if (status->excessive_retries) { struct sta_info *sta; sta = sta_info_get(local, hdr->addr1); if (sta) { if (sta->flags & WLAN_STA_PS) { - /* The STA is in power save mode, so assume + /* + * The STA is in power save mode, so assume * that this TX packet failed because of that. */ status->excessive_retries = 0; status->flags |= IEEE80211_TX_STATUS_TX_FILTERED; + ieee80211_handle_filtered_frame(local, sta, + skb, status); + rcu_read_unlock(); + return; } - sta_info_put(sta); } } @@ -860,53 +1394,16 @@ void ieee80211_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb, struct sta_info *sta; sta = sta_info_get(local, hdr->addr1); if (sta) { - sta->tx_filtered_count++; - - /* Clear the TX filter mask for this STA when sending - * the next packet. If the STA went to power save mode, - * this will happen when it is waking up for the next - * time. */ - sta->clear_dst_mask = 1; - - /* TODO: Is the WLAN_STA_PS flag always set here or is - * the race between RX and TX status causing some - * packets to be filtered out before 80211.o gets an - * update for PS status? This seems to be the case, so - * no changes are likely to be needed. */ - if (sta->flags & WLAN_STA_PS && - skb_queue_len(&sta->tx_filtered) < - STA_MAX_TX_BUFFER) { - ieee80211_remove_tx_extra(local, sta->key, - skb, - &status->control); - skb_queue_tail(&sta->tx_filtered, skb); - } else if (!(sta->flags & WLAN_STA_PS) && - !(status->control.flags & IEEE80211_TXCTL_REQUEUE)) { - /* Software retry the packet once */ - status->control.flags |= IEEE80211_TXCTL_REQUEUE; - ieee80211_remove_tx_extra(local, sta->key, - skb, - &status->control); - dev_queue_xmit(skb); - } else { - if (net_ratelimit()) { - printk(KERN_DEBUG "%s: dropped TX " - "filtered frame queue_len=%d " - "PS=%d @%lu\n", - wiphy_name(local->hw.wiphy), - skb_queue_len( - &sta->tx_filtered), - !!(sta->flags & WLAN_STA_PS), - jiffies); - } - dev_kfree_skb(skb); - } - sta_info_put(sta); + ieee80211_handle_filtered_frame(local, sta, skb, + status); + rcu_read_unlock(); return; } } else rate_control_tx_status(local->mdev, skb, status); + rcu_read_unlock(); + ieee80211_led_tx(local, 0); /* SNMP counters @@ -944,7 +1441,11 @@ void ieee80211_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb, /* this was a transmitted frame, but now we want to reuse it */ skb_orphan(skb); - if (!local->monitors) { + /* + * This is a bit racy but we can avoid a lot of work + * with this test... + */ + if (!local->monitors && !local->cooked_mntrs) { dev_kfree_skb(skb); return; } @@ -978,51 +1479,44 @@ void ieee80211_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb, rthdr->data_retries = status->retry_count; + /* XXX: is this sufficient for BPF? */ + skb_set_mac_header(skb, 0); + skb->ip_summed = CHECKSUM_UNNECESSARY; + skb->pkt_type = PACKET_OTHERHOST; + skb->protocol = htons(ETH_P_802_2); + memset(skb->cb, 0, sizeof(skb->cb)); + rcu_read_lock(); - monitors = local->monitors; list_for_each_entry_rcu(sdata, &local->interfaces, list) { - /* - * Using the monitors counter is possibly racy, but - * if the value is wrong we simply either clone the skb - * once too much or forget sending it to one monitor iface - * The latter case isn't nice but fixing the race is much - * more complicated. - */ - if (!monitors || !skb) - goto out; - if (sdata->vif.type == IEEE80211_IF_TYPE_MNTR) { if (!netif_running(sdata->dev)) continue; - monitors--; - if (monitors) + + if (prev_dev) { skb2 = skb_clone(skb, GFP_ATOMIC); - else - skb2 = NULL; - skb->dev = sdata->dev; - /* XXX: is this sufficient for BPF? */ - skb_set_mac_header(skb, 0); - skb->ip_summed = CHECKSUM_UNNECESSARY; - skb->pkt_type = PACKET_OTHERHOST; - skb->protocol = htons(ETH_P_802_2); - memset(skb->cb, 0, sizeof(skb->cb)); - netif_rx(skb); - skb = skb2; + if (skb2) { + skb2->dev = prev_dev; + netif_rx(skb2); + } + } + + prev_dev = sdata->dev; } } - out: + if (prev_dev) { + skb->dev = prev_dev; + netif_rx(skb); + skb = NULL; + } rcu_read_unlock(); - if (skb) - dev_kfree_skb(skb); + dev_kfree_skb(skb); } EXPORT_SYMBOL(ieee80211_tx_status); struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len, const struct ieee80211_ops *ops) { - struct net_device *mdev; struct ieee80211_local *local; - struct ieee80211_sub_if_data *sdata; int priv_size; struct wiphy *wiphy; @@ -1068,25 +1562,8 @@ struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len, BUG_ON(!ops->configure_filter); local->ops = ops; - /* for now, mdev needs sub_if_data :/ */ - mdev = alloc_netdev(sizeof(struct ieee80211_sub_if_data), - "wmaster%d", ether_setup); - if (!mdev) { - wiphy_free(wiphy); - return NULL; - } - - sdata = IEEE80211_DEV_TO_SUB_IF(mdev); - mdev->ieee80211_ptr = &sdata->wdev; - sdata->wdev.wiphy = wiphy; - local->hw.queues = 1; /* default */ - local->mdev = mdev; - local->rx_pre_handlers = ieee80211_rx_pre_handlers; - local->rx_handlers = ieee80211_rx_handlers; - local->tx_handlers = ieee80211_tx_handlers; - local->bridge_packets = 1; local->rts_threshold = IEEE80211_MAX_RTS_THRESHOLD; @@ -1095,33 +1572,12 @@ struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len, local->long_retry_limit = 4; local->hw.conf.radio_enabled = 1; - local->enabled_modes = ~0; - - INIT_LIST_HEAD(&local->modes_list); - INIT_LIST_HEAD(&local->interfaces); INIT_DELAYED_WORK(&local->scan_work, ieee80211_sta_scan_work); - ieee80211_rx_bss_list_init(mdev); sta_info_init(local); - mdev->hard_start_xmit = ieee80211_master_start_xmit; - mdev->open = ieee80211_master_open; - mdev->stop = ieee80211_master_stop; - mdev->type = ARPHRD_IEEE80211; - mdev->header_ops = &ieee80211_header_ops; - mdev->set_multicast_list = ieee80211_master_set_multicast_list; - - sdata->vif.type = IEEE80211_IF_TYPE_AP; - sdata->dev = mdev; - sdata->local = local; - sdata->u.ap.force_unicast_rateidx = -1; - sdata->u.ap.max_ratectrl_rateidx = -1; - ieee80211_if_sdata_init(sdata); - /* no RCU needed since we're still during init phase */ - list_add_tail(&sdata->list, &local->interfaces); - tasklet_init(&local->tx_pending_tasklet, ieee80211_tx_pending, (unsigned long)local); tasklet_disable(&local->tx_pending_tasklet); @@ -1143,11 +1599,63 @@ int ieee80211_register_hw(struct ieee80211_hw *hw) struct ieee80211_local *local = hw_to_local(hw); const char *name; int result; + enum ieee80211_band band; + struct net_device *mdev; + struct ieee80211_sub_if_data *sdata; + + /* + * generic code guarantees at least one band, + * set this very early because much code assumes + * that hw.conf.channel is assigned + */ + for (band = 0; band < IEEE80211_NUM_BANDS; band++) { + struct ieee80211_supported_band *sband; + + sband = local->hw.wiphy->bands[band]; + if (sband) { + /* init channel we're on */ + local->hw.conf.channel = + local->oper_channel = + local->scan_channel = &sband->channels[0]; + break; + } + } result = wiphy_register(local->hw.wiphy); if (result < 0) return result; + /* for now, mdev needs sub_if_data :/ */ + mdev = alloc_netdev(sizeof(struct ieee80211_sub_if_data), + "wmaster%d", ether_setup); + if (!mdev) + goto fail_mdev_alloc; + + sdata = IEEE80211_DEV_TO_SUB_IF(mdev); + mdev->ieee80211_ptr = &sdata->wdev; + sdata->wdev.wiphy = local->hw.wiphy; + + local->mdev = mdev; + + ieee80211_rx_bss_list_init(mdev); + + mdev->hard_start_xmit = ieee80211_master_start_xmit; + mdev->open = ieee80211_master_open; + mdev->stop = ieee80211_master_stop; + mdev->type = ARPHRD_IEEE80211; + mdev->header_ops = &ieee80211_header_ops; + mdev->set_multicast_list = ieee80211_master_set_multicast_list; + + sdata->vif.type = IEEE80211_IF_TYPE_AP; + sdata->dev = mdev; + sdata->local = local; + sdata->u.ap.force_unicast_rateidx = -1; + sdata->u.ap.max_ratectrl_rateidx = -1; + ieee80211_if_sdata_init(sdata); + + /* no RCU needed since we're still during init phase */ + list_add_tail(&sdata->list, &local->interfaces); + name = wiphy_dev(local->hw.wiphy)->driver->name; local->hw.workqueue = create_singlethread_workqueue(name); if (!local->hw.workqueue) { @@ -1215,7 +1723,7 @@ int ieee80211_register_hw(struct ieee80211_hw *hw) /* add one default STA interface */ result = ieee80211_if_add(local->mdev, "wlan%d", NULL, - IEEE80211_IF_TYPE_STA); + IEEE80211_IF_TYPE_STA, NULL); if (result) printk(KERN_WARNING "%s: Failed to add default virtual iface\n", wiphy_name(local->hw.wiphy)); @@ -1239,49 +1747,18 @@ fail_sta_info: debugfs_hw_del(local); destroy_workqueue(local->hw.workqueue); fail_workqueue: + ieee80211_if_free(local->mdev); + local->mdev = NULL; +fail_mdev_alloc: wiphy_unregister(local->hw.wiphy); return result; } EXPORT_SYMBOL(ieee80211_register_hw); -int ieee80211_register_hwmode(struct ieee80211_hw *hw, - struct ieee80211_hw_mode *mode) -{ - struct ieee80211_local *local = hw_to_local(hw); - struct ieee80211_rate *rate; - int i; - - INIT_LIST_HEAD(&mode->list); - list_add_tail(&mode->list, &local->modes_list); - - local->hw_modes |= (1 << mode->mode); - for (i = 0; i < mode->num_rates; i++) { - rate = &(mode->rates[i]); - rate->rate_inv = CHAN_UTIL_RATE_LCM / rate->rate; - } - ieee80211_prepare_rates(local, mode); - - if (!local->oper_hw_mode) { - /* Default to this mode */ - local->hw.conf.phymode = mode->mode; - local->oper_hw_mode = local->scan_hw_mode = mode; - local->oper_channel = local->scan_channel = &mode->channels[0]; - local->hw.conf.mode = local->oper_hw_mode; - local->hw.conf.chan = local->oper_channel; - } - - if (!(hw->flags & IEEE80211_HW_DEFAULT_REG_DOMAIN_CONFIGURED)) - ieee80211_set_default_regdomain(mode); - - return 0; -} -EXPORT_SYMBOL(ieee80211_register_hwmode); - void ieee80211_unregister_hw(struct ieee80211_hw *hw) { struct ieee80211_local *local = hw_to_local(hw); struct ieee80211_sub_if_data *sdata, *tmp; - int i; tasklet_kill(&local->tx_pending_tasklet); tasklet_kill(&local->tasklet); @@ -1322,11 +1799,6 @@ void ieee80211_unregister_hw(struct ieee80211_hw *hw) rate_control_deinitialize(local); debugfs_hw_del(local); - for (i = 0; i < NUM_IEEE80211_MODES; i++) { - kfree(local->supp_rates[i]); - kfree(local->basic_rates[i]); - } - if (skb_queue_len(&local->skb_queue) || skb_queue_len(&local->skb_queue_unreliable)) printk(KERN_WARNING "%s: skb_queue not empty\n", @@ -1338,6 +1810,8 @@ void ieee80211_unregister_hw(struct ieee80211_hw *hw) wiphy_unregister(local->hw.wiphy); ieee80211_wep_free(local); ieee80211_led_exit(local); + ieee80211_if_free(local->mdev); + local->mdev = NULL; } EXPORT_SYMBOL(ieee80211_unregister_hw); @@ -1345,7 +1819,6 @@ void ieee80211_free_hw(struct ieee80211_hw *hw) { struct ieee80211_local *local = hw_to_local(hw); - ieee80211_if_free(local->mdev); wiphy_free(local->hw.wiphy); } EXPORT_SYMBOL(ieee80211_free_hw); @@ -1357,13 +1830,9 @@ static int __init ieee80211_init(void) BUILD_BUG_ON(sizeof(struct ieee80211_tx_packet_data) > sizeof(skb->cb)); - ret = rc80211_simple_init(); - if (ret) - goto out; - ret = rc80211_pid_init(); if (ret) - goto out_cleanup_simple; + goto out; ret = ieee80211_wme_register(); if (ret) { @@ -1373,23 +1842,22 @@ static int __init ieee80211_init(void) } ieee80211_debugfs_netdev_init(); - ieee80211_regdomain_init(); return 0; out_cleanup_pid: rc80211_pid_exit(); - out_cleanup_simple: - rc80211_simple_exit(); out: return ret; } static void __exit ieee80211_exit(void) { - rc80211_simple_exit(); rc80211_pid_exit(); + if (mesh_allocated) + ieee80211s_stop(); + ieee80211_wme_unregister(); ieee80211_debugfs_netdev_exit(); } |