diff options
Diffstat (limited to 'net/mac80211/main.c')
| -rw-r--r-- | net/mac80211/main.c | 1891 |
1 files changed, 1891 insertions, 0 deletions
diff --git a/net/mac80211/main.c b/net/mac80211/main.c new file mode 100644 index 000000000000..e9a978979d38 --- /dev/null +++ b/net/mac80211/main.c @@ -0,0 +1,1891 @@ +/* + * Copyright 2002-2005, Instant802 Networks, Inc. + * Copyright 2005-2006, Devicescape Software, Inc. + * Copyright 2006-2007 Jiri Benc <jbenc@suse.cz> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <net/mac80211.h> +#include <net/ieee80211_radiotap.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/netdevice.h> +#include <linux/types.h> +#include <linux/slab.h> +#include <linux/skbuff.h> +#include <linux/etherdevice.h> +#include <linux/if_arp.h> +#include <linux/wireless.h> +#include <linux/rtnetlink.h> +#include <linux/bitmap.h> +#include <net/net_namespace.h> +#include <net/cfg80211.h> + +#include "ieee80211_i.h" +#include "rate.h" +#include "mesh.h" +#include "wep.h" +#include "wme.h" +#include "aes_ccm.h" +#include "led.h" +#include "cfg.h" +#include "debugfs.h" +#include "debugfs_netdev.h" + +#define SUPP_MCS_SET_LEN 16 + +/* + * For seeing transmitted packets on monitor interfaces + * we have a radiotap header too. + */ +struct ieee80211_tx_status_rtap_hdr { + struct ieee80211_radiotap_header hdr; + __le16 tx_flags; + u8 data_retries; +} __attribute__ ((packed)); + +/* common interface routines */ + +static int header_parse_80211(const struct sk_buff *skb, unsigned char *haddr) +{ + memcpy(haddr, skb_mac_header(skb) + 10, ETH_ALEN); /* addr2 */ + return ETH_ALEN; +} + +/* must be called under mdev tx lock */ +static void ieee80211_configure_filter(struct ieee80211_local *local) +{ + unsigned int changed_flags; + unsigned int new_flags = 0; + + if (atomic_read(&local->iff_promiscs)) + new_flags |= FIF_PROMISC_IN_BSS; + + if (atomic_read(&local->iff_allmultis)) + new_flags |= FIF_ALLMULTI; + + if (local->monitors) + new_flags |= FIF_BCN_PRBRESP_PROMISC; + + if (local->fif_fcsfail) + new_flags |= FIF_FCSFAIL; + + if (local->fif_plcpfail) + new_flags |= FIF_PLCPFAIL; + + if (local->fif_control) + new_flags |= FIF_CONTROL; + + if (local->fif_other_bss) + new_flags |= FIF_OTHER_BSS; + + changed_flags = local->filter_flags ^ new_flags; + + /* be a bit nasty */ + new_flags |= (1<<31); + + local->ops->configure_filter(local_to_hw(local), + changed_flags, &new_flags, + local->mdev->mc_count, + local->mdev->mc_list); + + WARN_ON(new_flags & (1<<31)); + + local->filter_flags = new_flags & ~(1<<31); +} + +/* master interface */ + +static int ieee80211_master_open(struct net_device *dev) +{ + struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); + struct ieee80211_sub_if_data *sdata; + int res = -EOPNOTSUPP; + + /* we hold the RTNL here so can safely walk the list */ + list_for_each_entry(sdata, &local->interfaces, list) { + if (sdata->dev != dev && netif_running(sdata->dev)) { + res = 0; + break; + } + } + return res; +} + +static int ieee80211_master_stop(struct net_device *dev) +{ + struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); + struct ieee80211_sub_if_data *sdata; + + /* we hold the RTNL here so can safely walk the list */ + list_for_each_entry(sdata, &local->interfaces, list) + if (sdata->dev != dev && netif_running(sdata->dev)) + dev_close(sdata->dev); + + return 0; +} + +static void ieee80211_master_set_multicast_list(struct net_device *dev) +{ + struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); + + ieee80211_configure_filter(local); +} + +/* regular interfaces */ + +static int ieee80211_change_mtu(struct net_device *dev, int new_mtu) +{ + int meshhdrlen; + struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); + + meshhdrlen = (sdata->vif.type == IEEE80211_IF_TYPE_MESH_POINT) ? 5 : 0; + + /* FIX: what would be proper limits for MTU? + * This interface uses 802.3 frames. */ + if (new_mtu < 256 || + new_mtu > IEEE80211_MAX_DATA_LEN - 24 - 6 - meshhdrlen) { + printk(KERN_WARNING "%s: invalid MTU %d\n", + dev->name, new_mtu); + return -EINVAL; + } + +#ifdef CONFIG_MAC80211_VERBOSE_DEBUG + printk(KERN_DEBUG "%s: setting MTU %d\n", dev->name, new_mtu); +#endif /* CONFIG_MAC80211_VERBOSE_DEBUG */ + dev->mtu = new_mtu; + return 0; +} + +static inline int identical_mac_addr_allowed(int type1, int type2) +{ + return (type1 == IEEE80211_IF_TYPE_MNTR || + type2 == IEEE80211_IF_TYPE_MNTR || + (type1 == IEEE80211_IF_TYPE_AP && + type2 == IEEE80211_IF_TYPE_WDS) || + (type1 == IEEE80211_IF_TYPE_WDS && + (type2 == IEEE80211_IF_TYPE_WDS || + type2 == IEEE80211_IF_TYPE_AP)) || + (type1 == IEEE80211_IF_TYPE_AP && + type2 == IEEE80211_IF_TYPE_VLAN) || + (type1 == IEEE80211_IF_TYPE_VLAN && + (type2 == IEEE80211_IF_TYPE_AP || + type2 == IEEE80211_IF_TYPE_VLAN))); +} + +static int ieee80211_open(struct net_device *dev) +{ + struct ieee80211_sub_if_data *sdata, *nsdata; + struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); + struct ieee80211_if_init_conf conf; + int res; + bool need_hw_reconfig = 0; + struct sta_info *sta; + + sdata = IEEE80211_DEV_TO_SUB_IF(dev); + + /* we hold the RTNL here so can safely walk the list */ + list_for_each_entry(nsdata, &local->interfaces, list) { + struct net_device *ndev = nsdata->dev; + + if (ndev != dev && ndev != local->mdev && netif_running(ndev)) { + /* + * Allow only a single IBSS interface to be up at any + * time. This is restricted because beacon distribution + * cannot work properly if both are in the same IBSS. + * + * To remove this restriction we'd have to disallow them + * from setting the same SSID on different IBSS interfaces + * belonging to the same hardware. Then, however, we're + * faced with having to adopt two different TSF timers... + */ + if (sdata->vif.type == IEEE80211_IF_TYPE_IBSS && + nsdata->vif.type == IEEE80211_IF_TYPE_IBSS) + return -EBUSY; + + /* + * Disallow multiple IBSS/STA mode interfaces. + * + * This is a technical restriction, it is possible although + * most likely not IEEE 802.11 compliant to have multiple + * STAs with just a single hardware (the TSF timer will not + * be adjusted properly.) + * + * However, because mac80211 uses the master device's BSS + * information for each STA/IBSS interface, doing this will + * currently corrupt that BSS information completely, unless, + * a not very useful case, both STAs are associated to the + * same BSS. + * + * To remove this restriction, the BSS information needs to + * be embedded in the STA/IBSS mode sdata instead of using + * the master device's BSS structure. + */ + if ((sdata->vif.type == IEEE80211_IF_TYPE_STA || + sdata->vif.type == IEEE80211_IF_TYPE_IBSS) && + (nsdata->vif.type == IEEE80211_IF_TYPE_STA || + nsdata->vif.type == IEEE80211_IF_TYPE_IBSS)) + return -EBUSY; + + /* + * The remaining checks are only performed for interfaces + * with the same MAC address. + */ + if (compare_ether_addr(dev->dev_addr, ndev->dev_addr)) + continue; + + /* + * check whether it may have the same address + */ + if (!identical_mac_addr_allowed(sdata->vif.type, + nsdata->vif.type)) + return -ENOTUNIQ; + + /* + * can only add VLANs to enabled APs + */ + if (sdata->vif.type == IEEE80211_IF_TYPE_VLAN && + nsdata->vif.type == IEEE80211_IF_TYPE_AP) + sdata->u.vlan.ap = nsdata; + } + } + + switch (sdata->vif.type) { + case IEEE80211_IF_TYPE_WDS: + if (is_zero_ether_addr(sdata->u.wds.remote_addr)) + return -ENOLINK; + + /* Create STA entry for the WDS peer */ + sta = sta_info_alloc(sdata, sdata->u.wds.remote_addr, + GFP_KERNEL); + if (!sta) + return -ENOMEM; + + sta->flags |= WLAN_STA_AUTHORIZED; + + res = sta_info_insert(sta); + if (res) { + /* STA has been freed */ + return res; + } + break; + case IEEE80211_IF_TYPE_VLAN: + if (!sdata->u.vlan.ap) + return -ENOLINK; + break; + case IEEE80211_IF_TYPE_AP: + case IEEE80211_IF_TYPE_STA: + case IEEE80211_IF_TYPE_MNTR: + case IEEE80211_IF_TYPE_IBSS: + case IEEE80211_IF_TYPE_MESH_POINT: + /* no special treatment */ + break; + case IEEE80211_IF_TYPE_INVALID: + /* cannot happen */ + WARN_ON(1); + break; + } + + if (local->open_count == 0) { + res = 0; + if (local->ops->start) + res = local->ops->start(local_to_hw(local)); + if (res) + return res; + need_hw_reconfig = 1; + ieee80211_led_radio(local, local->hw.conf.radio_enabled); + } + + switch (sdata->vif.type) { + case IEEE80211_IF_TYPE_VLAN: + list_add(&sdata->u.vlan.list, &sdata->u.vlan.ap->u.ap.vlans); + /* no need to tell driver */ + break; + case IEEE80211_IF_TYPE_MNTR: + if (sdata->u.mntr_flags & MONITOR_FLAG_COOK_FRAMES) { + local->cooked_mntrs++; + break; + } + + /* must be before the call to ieee80211_configure_filter */ + local->monitors++; + if (local->monitors == 1) + local->hw.conf.flags |= IEEE80211_CONF_RADIOTAP; + + if (sdata->u.mntr_flags & MONITOR_FLAG_FCSFAIL) + local->fif_fcsfail++; + if (sdata->u.mntr_flags & MONITOR_FLAG_PLCPFAIL) + local->fif_plcpfail++; + if (sdata->u.mntr_flags & MONITOR_FLAG_CONTROL) + local->fif_control++; + if (sdata->u.mntr_flags & MONITOR_FLAG_OTHER_BSS) + local->fif_other_bss++; + + netif_tx_lock_bh(local->mdev); + ieee80211_configure_filter(local); + netif_tx_unlock_bh(local->mdev); + break; + case IEEE80211_IF_TYPE_STA: + case IEEE80211_IF_TYPE_IBSS: + sdata->u.sta.flags &= ~IEEE80211_STA_PREV_BSSID_SET; + /* fall through */ + default: + conf.vif = &sdata->vif; + conf.type = sdata->vif.type; + conf.mac_addr = dev->dev_addr; + res = local->ops->add_interface(local_to_hw(local), &conf); + if (res && !local->open_count && local->ops->stop) + local->ops->stop(local_to_hw(local)); + if (res) + return res; + + ieee80211_if_config(dev); + ieee80211_reset_erp_info(dev); + ieee80211_enable_keys(sdata); + + if (sdata->vif.type == IEEE80211_IF_TYPE_STA && + !(sdata->flags & IEEE80211_SDATA_USERSPACE_MLME)) + netif_carrier_off(dev); + else + netif_carrier_on(dev); + } + + if (local->open_count == 0) { + res = dev_open(local->mdev); + WARN_ON(res); + tasklet_enable(&local->tx_pending_tasklet); + tasklet_enable(&local->tasklet); + } + + /* + * set_multicast_list will be invoked by the networking core + * which will check whether any increments here were done in + * error and sync them down to the hardware as filter flags. + */ + if (sdata->flags & IEEE80211_SDATA_ALLMULTI) + atomic_inc(&local->iff_allmultis); + + if (sdata->flags & IEEE80211_SDATA_PROMISC) + atomic_inc(&local->iff_promiscs); + + local->open_count++; + if (need_hw_reconfig) + ieee80211_hw_config(local); + + /* + * ieee80211_sta_work is disabled while network interface + * is down. Therefore, some configuration changes may not + * yet be effective. Trigger execution of ieee80211_sta_work + * to fix this. + */ + if(sdata->vif.type == IEEE80211_IF_TYPE_STA || + sdata->vif.type == IEEE80211_IF_TYPE_IBSS) { + struct ieee80211_if_sta *ifsta = &sdata->u.sta; + queue_work(local->hw.workqueue, &ifsta->work); + } + + netif_start_queue(dev); + + return 0; +} + +static int ieee80211_stop(struct net_device *dev) +{ + struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); + struct ieee80211_local *local = sdata->local; + struct ieee80211_if_init_conf conf; + struct sta_info *sta; + + /* + * Stop TX on this interface first. + */ + netif_stop_queue(dev); + + /* + * Now delete all active aggregation sessions. + */ + rcu_read_lock(); + + list_for_each_entry_rcu(sta, &local->sta_list, list) { + if (sta->sdata == sdata) + ieee80211_sta_tear_down_BA_sessions(dev, sta->addr); + } + + rcu_read_unlock(); + + /* + * Remove all stations associated with this interface. + * + * This must be done before calling ops->remove_interface() + * because otherwise we can later invoke ops->sta_notify() + * whenever the STAs are removed, and that invalidates driver + * assumptions about always getting a vif pointer that is valid + * (because if we remove a STA after ops->remove_interface() + * the driver will have removed the vif info already!) + * + * We could relax this and only unlink the stations from the + * hash table and list but keep them on a per-sdata list that + * will be inserted back again when the interface is brought + * up again, but I don't currently see a use case for that, + * except with WDS which gets a STA entry created when it is + * brought up. + */ + sta_info_flush(local, sdata); + + /* + * Don't count this interface for promisc/allmulti while it + * is down. dev_mc_unsync() will invoke set_multicast_list + * on the master interface which will sync these down to the + * hardware as filter flags. + */ + if (sdata->flags & IEEE80211_SDATA_ALLMULTI) + atomic_dec(&local->iff_allmultis); + + if (sdata->flags & IEEE80211_SDATA_PROMISC) + atomic_dec(&local->iff_promiscs); + + dev_mc_unsync(local->mdev, dev); + + /* APs need special treatment */ + if (sdata->vif.type == IEEE80211_IF_TYPE_AP) { + struct ieee80211_sub_if_data *vlan, *tmp; + struct beacon_data *old_beacon = sdata->u.ap.beacon; + + /* remove beacon */ + rcu_assign_pointer(sdata->u.ap.beacon, NULL); + synchronize_rcu(); + kfree(old_beacon); + + /* down all dependent devices, that is VLANs */ + list_for_each_entry_safe(vlan, tmp, &sdata->u.ap.vlans, + u.vlan.list) + dev_close(vlan->dev); + WARN_ON(!list_empty(&sdata->u.ap.vlans)); + } + + local->open_count--; + + switch (sdata->vif.type) { + case IEEE80211_IF_TYPE_VLAN: + list_del(&sdata->u.vlan.list); + sdata->u.vlan.ap = NULL; + /* no need to tell driver */ + break; + case IEEE80211_IF_TYPE_MNTR: + if (sdata->u.mntr_flags & MONITOR_FLAG_COOK_FRAMES) { + local->cooked_mntrs--; + break; + } + + local->monitors--; + if (local->monitors == 0) + local->hw.conf.flags &= ~IEEE80211_CONF_RADIOTAP; + + if (sdata->u.mntr_flags & MONITOR_FLAG_FCSFAIL) + local->fif_fcsfail--; + if (sdata->u.mntr_flags & MONITOR_FLAG_PLCPFAIL) + local->fif_plcpfail--; + if (sdata->u.mntr_flags & MONITOR_FLAG_CONTROL) + local->fif_control--; + if (sdata->u.mntr_flags & MONITOR_FLAG_OTHER_BSS) + local->fif_other_bss--; + + netif_tx_lock_bh(local->mdev); + ieee80211_configure_filter(local); + netif_tx_unlock_bh(local->mdev); + break; + case IEEE80211_IF_TYPE_MESH_POINT: + case IEEE80211_IF_TYPE_STA: + case IEEE80211_IF_TYPE_IBSS: + sdata->u.sta.state = IEEE80211_DISABLED; + del_timer_sync(&sdata->u.sta.timer); + /* + * When we get here, the interface is marked down. + * Call synchronize_rcu() to wait for the RX path + * should it be using the interface and enqueuing + * frames at this very time on another CPU. + */ + synchronize_rcu(); + skb_queue_purge(&sdata->u.sta.skb_queue); + + if (local->scan_dev == sdata->dev) { + if (!local->ops->hw_scan) { + local->sta_sw_scanning = 0; + cancel_delayed_work(&local->scan_work); + } else + local->sta_hw_scanning = 0; + } + + flush_workqueue(local->hw.workqueue); + + sdata->u.sta.flags &= ~IEEE80211_STA_PRIVACY_INVOKED; + kfree(sdata->u.sta.extra_ie); + sdata->u.sta.extra_ie = NULL; + sdata->u.sta.extra_ie_len = 0; + /* fall through */ + default: + conf.vif = &sdata->vif; + conf.type = sdata->vif.type; + conf.mac_addr = dev->dev_addr; + /* disable all keys for as long as this netdev is down */ + ieee80211_disable_keys(sdata); + local->ops->remove_interface(local_to_hw(local), &conf); + } + + if (local->open_count == 0) { + if (netif_running(local->mdev)) + dev_close(local->mdev); + + if (local->ops->stop) + local->ops->stop(local_to_hw(local)); + + ieee80211_led_radio(local, 0); + + tasklet_disable(&local->tx_pending_tasklet); + tasklet_disable(&local->tasklet); + } + + return 0; +} + +int ieee80211_start_tx_ba_session(struct ieee80211_hw *hw, u8 *ra, u16 tid) +{ + struct ieee80211_local *local = hw_to_local(hw); + struct sta_info *sta; + struct ieee80211_sub_if_data *sdata; + u16 start_seq_num = 0; + u8 *state; + int ret; + DECLARE_MAC_BUF(mac); + + if (tid >= STA_TID_NUM) + return -EINVAL; + +#ifdef CONFIG_MAC80211_HT_DEBUG + printk(KERN_DEBUG "Open BA session requested for %s tid %u\n", + print_mac(mac, ra), tid); +#endif /* CONFIG_MAC80211_HT_DEBUG */ + + rcu_read_lock(); + + sta = sta_info_get(local, ra); + if (!sta) { + printk(KERN_DEBUG "Could not find the station\n"); + rcu_read_unlock(); + return -ENOENT; + } + + spin_lock_bh(&sta->ampdu_mlme.ampdu_tx); + + /* we have tried too many times, receiver does not want A-MPDU */ + if (sta->ampdu_mlme.addba_req_num[tid] > HT_AGG_MAX_RETRIES) { + ret = -EBUSY; + goto start_ba_exit; + } + + state = &sta->ampdu_mlme.tid_state_tx[tid]; + /* check if the TID is not in aggregation flow already */ + if (*state != HT_AGG_STATE_IDLE) { +#ifdef CONFIG_MAC80211_HT_DEBUG + printk(KERN_DEBUG "BA request denied - session is not " + "idle on tid %u\n", tid); +#endif /* CONFIG_MAC80211_HT_DEBUG */ + ret = -EAGAIN; + goto start_ba_exit; + } + + /* prepare A-MPDU MLME for Tx aggregation */ + sta->ampdu_mlme.tid_tx[tid] = + kmalloc(sizeof(struct tid_ampdu_tx), GFP_ATOMIC); + if (!sta->ampdu_mlme.tid_tx[tid]) { + if (net_ratelimit()) + printk(KERN_ERR "allocate tx mlme to tid %d failed\n", + tid); + ret = -ENOMEM; + goto start_ba_exit; + } + /* Tx timer */ + sta->ampdu_mlme.tid_tx[tid]->addba_resp_timer.function = + sta_addba_resp_timer_expired; + sta->ampdu_mlme.tid_tx[tid]->addba_resp_timer.data = + (unsigned long)&sta->timer_to_tid[tid]; + init_timer(&sta->ampdu_mlme.tid_tx[tid]->addba_resp_timer); + + /* ensure that TX flow won't interrupt us + * until the end of the call to requeue function */ + spin_lock_bh(&local->mdev->queue_lock); + + /* create a new queue for this aggregation */ + ret = ieee80211_ht_agg_queue_add(local, sta, tid); + + /* case no queue is available to aggregation + * don't switch to aggregation */ + if (ret) { +#ifdef CONFIG_MAC80211_HT_DEBUG + printk(KERN_DEBUG "BA request denied - queue unavailable for" + " tid %d\n", tid); +#endif /* CONFIG_MAC80211_HT_DEBUG */ + goto start_ba_err; + } + sdata = sta->sdata; + + /* Ok, the Addba frame hasn't been sent yet, but if the driver calls the + * call back right away, it must see that the flow has begun */ + *state |= HT_ADDBA_REQUESTED_MSK; + + if (local->ops->ampdu_action) + ret = local->ops->ampdu_action(hw, IEEE80211_AMPDU_TX_START, + ra, tid, &start_seq_num); + + if (ret) { + /* No need to requeue the packets in the agg queue, since we + * held the tx lock: no packet could be enqueued to the newly + * allocated queue */ + ieee80211_ht_agg_queue_remove(local, sta, tid, 0); +#ifdef CONFIG_MAC80211_HT_DEBUG + printk(KERN_DEBUG "BA request denied - HW unavailable for" + " tid %d\n", tid); +#endif /* CONFIG_MAC80211_HT_DEBUG */ + *state = HT_AGG_STATE_IDLE; + goto start_ba_err; + } + + /* Will put all the packets in the new SW queue */ + ieee80211_requeue(local, ieee802_1d_to_ac[tid]); + spin_unlock_bh(&local->mdev->queue_lock); + + /* send an addBA request */ + sta->ampdu_mlme.dialog_token_allocator++; + sta->ampdu_mlme.tid_tx[tid]->dialog_token = + sta->ampdu_mlme.dialog_token_allocator; + sta->ampdu_mlme.tid_tx[tid]->ssn = start_seq_num; + + ieee80211_send_addba_request(sta->sdata->dev, ra, tid, + sta->ampdu_mlme.tid_tx[tid]->dialog_token, + sta->ampdu_mlme.tid_tx[tid]->ssn, + 0x40, 5000); + + /* activate the timer for the recipient's addBA response */ + sta->ampdu_mlme.tid_tx[tid]->addba_resp_timer.expires = + jiffies + ADDBA_RESP_INTERVAL; + add_timer(&sta->ampdu_mlme.tid_tx[tid]->addba_resp_timer); + printk(KERN_DEBUG "activated addBA response timer on tid %d\n", tid); + goto start_ba_exit; + +start_ba_err: + kfree(sta->ampdu_mlme.tid_tx[tid]); + sta->ampdu_mlme.tid_tx[tid] = NULL; + spin_unlock_bh(&local->mdev->queue_lock); + ret = -EBUSY; +start_ba_exit: + spin_unlock_bh(&sta->ampdu_mlme.ampdu_tx); + rcu_read_unlock(); + return ret; +} +EXPORT_SYMBOL(ieee80211_start_tx_ba_session); + +int ieee80211_stop_tx_ba_session(struct ieee80211_hw *hw, + u8 *ra, u16 tid, + enum ieee80211_back_parties initiator) +{ + struct ieee80211_local *local = hw_to_local(hw); + struct sta_info *sta; + u8 *state; + int ret = 0; + DECLARE_MAC_BUF(mac); + + if (tid >= STA_TID_NUM) + return -EINVAL; + + rcu_read_lock(); + sta = sta_info_get(local, ra); + if (!sta) { + rcu_read_unlock(); + return -ENOENT; + } + + /* check if the TID is in aggregation */ + state = &sta->ampdu_mlme.tid_state_tx[tid]; + spin_lock_bh(&sta->ampdu_mlme.ampdu_tx); + + if (*state != HT_AGG_STATE_OPERATIONAL) { + ret = -ENOENT; + goto stop_BA_exit; + } + +#ifdef CONFIG_MAC80211_HT_DEBUG + printk(KERN_DEBUG "Tx BA session stop requested for %s tid %u\n", + print_mac(mac, ra), tid); +#endif /* CONFIG_MAC80211_HT_DEBUG */ + + ieee80211_stop_queue(hw, sta->tid_to_tx_q[tid]); + + *state = HT_AGG_STATE_REQ_STOP_BA_MSK | + (initiator << HT_AGG_STATE_INITIATOR_SHIFT); + + if (local->ops->ampdu_action) + ret = local->ops->ampdu_action(hw, IEEE80211_AMPDU_TX_STOP, + ra, tid, NULL); + + /* case HW denied going back to legacy */ + if (ret) { + WARN_ON(ret != -EBUSY); + *state = HT_AGG_STATE_OPERATIONAL; + ieee80211_wake_queue(hw, sta->tid_to_tx_q[tid]); + goto stop_BA_exit; + } + +stop_BA_exit: + spin_unlock_bh(&sta->ampdu_mlme.ampdu_tx); + rcu_read_unlock(); + return ret; +} +EXPORT_SYMBOL(ieee80211_stop_tx_ba_session); + +void ieee80211_start_tx_ba_cb(struct ieee80211_hw *hw, u8 *ra, u16 tid) +{ + struct ieee80211_local *local = hw_to_local(hw); + struct sta_info *sta; + u8 *state; + DECLARE_MAC_BUF(mac); + + if (tid >= STA_TID_NUM) { + printk(KERN_DEBUG "Bad TID value: tid = %d (>= %d)\n", + tid, STA_TID_NUM); + return; + } + + rcu_read_lock(); + sta = sta_info_get(local, ra); + if (!sta) { + rcu_read_unlock(); + printk(KERN_DEBUG "Could not find station: %s\n", + print_mac(mac, ra)); + return; + } + + state = &sta->ampdu_mlme.tid_state_tx[tid]; + spin_lock_bh(&sta->ampdu_mlme.ampdu_tx); + + if (!(*state & HT_ADDBA_REQUESTED_MSK)) { + printk(KERN_DEBUG "addBA was not requested yet, state is %d\n", + *state); + spin_unlock_bh(&sta->ampdu_mlme.ampdu_tx); + rcu_read_unlock(); + return; + } + + WARN_ON_ONCE(*state & HT_ADDBA_DRV_READY_MSK); + + *state |= HT_ADDBA_DRV_READY_MSK; + + if (*state == HT_AGG_STATE_OPERATIONAL) { + printk(KERN_DEBUG "Aggregation is on for tid %d \n", tid); + ieee80211_wake_queue(hw, sta->tid_to_tx_q[tid]); + } + spin_unlock_bh(&sta->ampdu_mlme.ampdu_tx); + rcu_read_unlock(); +} +EXPORT_SYMBOL(ieee80211_start_tx_ba_cb); + +void ieee80211_stop_tx_ba_cb(struct ieee80211_hw *hw, u8 *ra, u8 tid) +{ + struct ieee80211_local *local = hw_to_local(hw); + struct sta_info *sta; + u8 *state; + int agg_queue; + DECLARE_MAC_BUF(mac); + + if (tid >= STA_TID_NUM) { + printk(KERN_DEBUG "Bad TID value: tid = %d (>= %d)\n", + tid, STA_TID_NUM); + return; + } + +#ifdef CONFIG_MAC80211_HT_DEBUG + printk(KERN_DEBUG "Stopping Tx BA session for %s tid %d\n", + print_mac(mac, ra), tid); +#endif /* CONFIG_MAC80211_HT_DEBUG */ + + rcu_read_lock(); + sta = sta_info_get(local, ra); + if (!sta) { + printk(KERN_DEBUG "Could not find station: %s\n", + print_mac(mac, ra)); + rcu_read_unlock(); + return; + } + state = &sta->ampdu_mlme.tid_state_tx[tid]; + + spin_lock_bh(&sta->ampdu_mlme.ampdu_tx); + if ((*state & HT_AGG_STATE_REQ_STOP_BA_MSK) == 0) { + printk(KERN_DEBUG "unexpected callback to A-MPDU stop\n"); + spin_unlock_bh(&sta->ampdu_mlme.ampdu_tx); + rcu_read_unlock(); + return; + } + + if (*state & HT_AGG_STATE_INITIATOR_MSK) + ieee80211_send_delba(sta->sdata->dev, ra, tid, + WLAN_BACK_INITIATOR, WLAN_REASON_QSTA_NOT_USE); + + agg_queue = sta->tid_to_tx_q[tid]; + + /* avoid ordering issues: we are the only one that can modify + * the content of the qdiscs */ + spin_lock_bh(&local->mdev->queue_lock); + /* remove the queue for this aggregation */ + ieee80211_ht_agg_queue_remove(local, sta, tid, 1); + spin_unlock_bh(&local->mdev->queue_lock); + + /* we just requeued the all the frames that were in the removed + * queue, and since we might miss a softirq we do netif_schedule. + * ieee80211_wake_queue is not used here as this queue is not + * necessarily stopped */ + netif_schedule(local->mdev); + *state = HT_AGG_STATE_IDLE; + sta->ampdu_mlme.addba_req_num[tid] = 0; + kfree(sta->ampdu_mlme.tid_tx[tid]); + sta->ampdu_mlme.tid_tx[tid] = NULL; + spin_unlock_bh(&sta->ampdu_mlme.ampdu_tx); + + rcu_read_unlock(); +} +EXPORT_SYMBOL(ieee80211_stop_tx_ba_cb); + +void ieee80211_start_tx_ba_cb_irqsafe(struct ieee80211_hw *hw, + const u8 *ra, u16 tid) +{ + struct ieee80211_local *local = hw_to_local(hw); + struct ieee80211_ra_tid *ra_tid; + struct sk_buff *skb = dev_alloc_skb(0); + + if (unlikely(!skb)) { + if (net_ratelimit()) + printk(KERN_WARNING "%s: Not enough memory, " + "dropping start BA session", skb->dev->name); + return; + } + ra_tid = (struct ieee80211_ra_tid *) &skb->cb; + memcpy(&ra_tid->ra, ra, ETH_ALEN); + ra_tid->tid = tid; + + skb->pkt_type = IEEE80211_ADDBA_MSG; + skb_queue_tail(&local->skb_queue, skb); + tasklet_schedule(&local->tasklet); +} +EXPORT_SYMBOL(ieee80211_start_tx_ba_cb_irqsafe); + +void ieee80211_stop_tx_ba_cb_irqsafe(struct ieee80211_hw *hw, + const u8 *ra, u16 tid) +{ + struct ieee80211_local *local = hw_to_local(hw); + struct ieee80211_ra_tid *ra_tid; + struct sk_buff *skb = dev_alloc_skb(0); + + if (unlikely(!skb)) { + if (net_ratelimit()) + printk(KERN_WARNING "%s: Not enough memory, " + "dropping stop BA session", skb->dev->name); + return; + } + ra_tid = (struct ieee80211_ra_tid *) &skb->cb; + memcpy(&ra_tid->ra, ra, ETH_ALEN); + ra_tid->tid = tid; + + skb->pkt_type = IEEE80211_DELBA_MSG; + skb_queue_tail(&local->skb_queue, skb); + tasklet_schedule(&local->tasklet); +} +EXPORT_SYMBOL(ieee80211_stop_tx_ba_cb_irqsafe); + +static void ieee80211_set_multicast_list(struct net_device *dev) +{ + struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); + struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); + int allmulti, promisc, sdata_allmulti, sdata_promisc; + + allmulti = !!(dev->flags & IFF_ALLMULTI); + promisc = !!(dev->flags & IFF_PROMISC); + sdata_allmulti = !!(sdata->flags & IEEE80211_SDATA_ALLMULTI); + sdata_promisc = !!(sdata->flags & IEEE80211_SDATA_PROMISC); + + if (allmulti != sdata_allmulti) { + if (dev->flags & IFF_ALLMULTI) + atomic_inc(&local->iff_allmultis); + else + atomic_dec(&local->iff_allmultis); + sdata->flags ^= IEEE80211_SDATA_ALLMULTI; + } + + if (promisc != sdata_promisc) { + if (dev->flags & IFF_PROMISC) + atomic_inc(&local->iff_promiscs); + else + atomic_dec(&local->iff_promiscs); + sdata->flags ^= IEEE80211_SDATA_PROMISC; + } + + dev_mc_sync(local->mdev, dev); +} + +static const struct header_ops ieee80211_header_ops = { + .create = eth_header, + .parse = header_parse_80211, + .rebuild = eth_rebuild_header, + .cache = eth_header_cache, + .cache_update = eth_header_cache_update, +}; + +/* Must not be called for mdev */ +void ieee80211_if_setup(struct net_device *dev) +{ + ether_setup(dev); + dev->hard_start_xmit = ieee80211_subif_start_xmit; + dev->wireless_handlers = &ieee80211_iw_handler_def; + dev->set_multicast_list = ieee80211_set_multicast_list; + dev->change_mtu = ieee80211_change_mtu; + dev->open = ieee80211_open; + dev->stop = ieee80211_stop; + dev->destructor = ieee80211_if_free; +} + +/* everything else */ + +static int __ieee80211_if_config(struct net_device *dev, + struct sk_buff *beacon, + struct ieee80211_tx_control *control) +{ + struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); + struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); + struct ieee80211_if_conf conf; + + if (!local->ops->config_interface || !netif_running(dev)) + return 0; + + memset(&conf, 0, sizeof(conf)); + conf.type = sdata->vif.type; + if (sdata->vif.type == IEEE80211_IF_TYPE_STA || + sdata->vif.type == IEEE80211_IF_TYPE_IBSS) { + conf.bssid = sdata->u.sta.bssid; + conf.ssid = sdata->u.sta.ssid; + conf.ssid_len = sdata->u.sta.ssid_len; + } else if (ieee80211_vif_is_mesh(&sdata->vif)) { + conf.beacon = beacon; + ieee80211_start_mesh(dev); + } else if (sdata->vif.type == IEEE80211_IF_TYPE_AP) { + conf.ssid = sdata->u.ap.ssid; + conf.ssid_len = sdata->u.ap.ssid_len; + conf.beacon = beacon; + conf.beacon_control = control; + } + return local->ops->config_interface(local_to_hw(local), + &sdata->vif, &conf); +} + +int ieee80211_if_config(struct net_device *dev) +{ + struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); + struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); + if (sdata->vif.type == IEEE80211_IF_TYPE_MESH_POINT && + (local->hw.flags & IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE)) + return ieee80211_if_config_beacon(dev); + return __ieee80211_if_config(dev, NULL, NULL); +} + +int ieee80211_if_config_beacon(struct net_device *dev) +{ + struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); + struct ieee80211_tx_control control; + struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); + struct sk_buff *skb; + + if (!(local->hw.flags & IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE)) + return 0; + skb = ieee80211_beacon_get(local_to_hw(local), &sdata->vif, + &control); + if (!skb) + return -ENOMEM; + return __ieee80211_if_config(dev, skb, &control); +} + +int ieee80211_hw_config(struct ieee80211_local *local) +{ + struct ieee80211_channel *chan; + int ret = 0; + + if (local->sta_sw_scanning) + chan = local->scan_channel; + else + chan = local->oper_channel; + + local->hw.conf.channel = chan; + + if (!local->hw.conf.power_level) + local->hw.conf.power_level = chan->max_power; + else + local->hw.conf.power_level = min(chan->max_power, + local->hw.conf.power_level); + + local->hw.conf.max_antenna_gain = chan->max_antenna_gain; + +#ifdef CONFIG_MAC80211_VERBOSE_DEBUG + printk(KERN_DEBUG "%s: HW CONFIG: freq=%d\n", + wiphy_name(local->hw.wiphy), chan->center_freq); +#endif + + if (local->open_count) + ret = local->ops->config(local_to_hw(local), &local->hw.conf); + + return ret; +} + +/** + * ieee80211_handle_ht should be used only after legacy configuration + * has been determined namely band, as ht configuration depends upon + * the hardware's HT abilities for a _specific_ band. + */ +u32 ieee80211_handle_ht(struct ieee80211_local *local, int enable_ht, + struct ieee80211_ht_info *req_ht_cap, + struct ieee80211_ht_bss_info *req_bss_cap) +{ + struct ieee80211_conf *conf = &local->hw.conf; + struct ieee80211_supported_band *sband; + struct ieee80211_ht_info ht_conf; + struct ieee80211_ht_bss_info ht_bss_conf; + int i; + u32 changed = 0; + + sband = local->hw.wiphy->bands[conf->channel->band]; + + /* HT is not supported */ + if (!sband->ht_info.ht_supported) { + conf->flags &= ~IEEE80211_CONF_SUPPORT_HT_MODE; + return 0; + } + + memset(&ht_conf, 0, sizeof(struct ieee80211_ht_info)); + memset(&ht_bss_conf, 0, sizeof(struct ieee80211_ht_bss_info)); + + if (enable_ht) { + if (!(conf->flags & IEEE80211_CONF_SUPPORT_HT_MODE)) + changed |= BSS_CHANGED_HT; + + conf->flags |= IEEE80211_CONF_SUPPORT_HT_MODE; + ht_conf.ht_supported = 1; + + ht_conf.cap = req_ht_cap->cap & sband->ht_info.cap; + ht_conf.cap &= ~(IEEE80211_HT_CAP_MIMO_PS); + ht_conf.cap |= sband->ht_info.cap & IEEE80211_HT_CAP_MIMO_PS; + + for (i = 0; i < SUPP_MCS_SET_LEN; i++) + ht_conf.supp_mcs_set[i] = + sband->ht_info.supp_mcs_set[i] & + req_ht_cap->supp_mcs_set[i]; + + ht_bss_conf.primary_channel = req_bss_cap->primary_channel; + ht_bss_conf.bss_cap = req_bss_cap->bss_cap; + ht_bss_conf.bss_op_mode = req_bss_cap->bss_op_mode; + + ht_conf.ampdu_factor = req_ht_cap->ampdu_factor; + ht_conf.ampdu_density = req_ht_cap->ampdu_density; + + /* if bss configuration changed store the new one */ + if (memcmp(&conf->ht_conf, &ht_conf, sizeof(ht_conf)) || + memcmp(&conf->ht_bss_conf, &ht_bss_conf, sizeof(ht_bss_conf))) { + changed |= BSS_CHANGED_HT; + memcpy(&conf->ht_conf, &ht_conf, sizeof(ht_conf)); + memcpy(&conf->ht_bss_conf, &ht_bss_conf, sizeof(ht_bss_conf)); + } + } else { + if (conf->flags & IEEE80211_CONF_SUPPORT_HT_MODE) + changed |= BSS_CHANGED_HT; + conf->flags &= ~IEEE80211_CONF_SUPPORT_HT_MODE; + } + + return changed; +} + +void ieee80211_bss_info_change_notify(struct ieee80211_sub_if_data *sdata, + u32 changed) +{ + struct ieee80211_local *local = sdata->local; + + if (!changed) + return; + + if (local->ops->bss_info_changed) + local->ops->bss_info_changed(local_to_hw(local), + &sdata->vif, + &sdata->bss_conf, + changed); +} + +void ieee80211_reset_erp_info(struct net_device *dev) +{ + struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); + + sdata->bss_conf.use_cts_prot = 0; + sdata->bss_conf.use_short_preamble = 0; + ieee80211_bss_info_change_notify(sdata, + BSS_CHANGED_ERP_CTS_PROT | + BSS_CHANGED_ERP_PREAMBLE); +} + +void ieee80211_tx_status_irqsafe(struct ieee80211_hw *hw, + struct sk_buff *skb, + struct ieee80211_tx_status *status) +{ + struct ieee80211_local *local = hw_to_local(hw); + struct ieee80211_tx_status *saved; + int tmp; + + skb->dev = local->mdev; + saved = kmalloc(sizeof(struct ieee80211_tx_status), GFP_ATOMIC); + if (unlikely(!saved)) { + if (net_ratelimit()) + printk(KERN_WARNING "%s: Not enough memory, " + "dropping tx status", skb->dev->name); + /* should be dev_kfree_skb_irq, but due to this function being + * named _irqsafe instead of just _irq we can't be sure that + * people won't call it from non-irq contexts */ + dev_kfree_skb_any(skb); + return; + } + memcpy(saved, status, sizeof(struct ieee80211_tx_status)); + /* copy pointer to saved status into skb->cb for use by tasklet */ + memcpy(skb->cb, &saved, sizeof(saved)); + + skb->pkt_type = IEEE80211_TX_STATUS_MSG; + skb_queue_tail(status->control.flags & IEEE80211_TXCTL_REQ_TX_STATUS ? + &local->skb_queue : &local->skb_queue_unreliable, skb); + tmp = skb_queue_len(&local->skb_queue) + + skb_queue_len(&local->skb_queue_unreliable); + while (tmp > IEEE80211_IRQSAFE_QUEUE_LIMIT && + (skb = skb_dequeue(&local->skb_queue_unreliable))) { + memcpy(&saved, skb->cb, sizeof(saved)); + kfree(saved); + dev_kfree_skb_irq(skb); + tmp--; + I802_DEBUG_INC(local->tx_status_drop); + } + tasklet_schedule(&local->tasklet); +} +EXPORT_SYMBOL(ieee80211_tx_status_irqsafe); + +static void ieee80211_tasklet_handler(unsigned long data) +{ + struct ieee80211_local *local = (struct ieee80211_local *) data; + struct sk_buff *skb; + struct ieee80211_rx_status rx_status; + struct ieee80211_tx_status *tx_status; + struct ieee80211_ra_tid *ra_tid; + + while ((skb = skb_dequeue(&local->skb_queue)) || + (skb = skb_dequeue(&local->skb_queue_unreliable))) { + switch (skb->pkt_type) { + case IEEE80211_RX_MSG: + /* status is in skb->cb */ + memcpy(&rx_status, skb->cb, sizeof(rx_status)); + /* Clear skb->pkt_type in order to not confuse kernel + * netstack. */ + skb->pkt_type = 0; + __ieee80211_rx(local_to_hw(local), skb, &rx_status); + break; + case IEEE80211_TX_STATUS_MSG: + /* get pointer to saved status out of skb->cb */ + memcpy(&tx_status, skb->cb, sizeof(tx_status)); + skb->pkt_type = 0; + ieee80211_tx_status(local_to_hw(local), + skb, tx_status); + kfree(tx_status); + break; + case IEEE80211_DELBA_MSG: + ra_tid = (struct ieee80211_ra_tid *) &skb->cb; + ieee80211_stop_tx_ba_cb(local_to_hw(local), + ra_tid->ra, ra_tid->tid); + dev_kfree_skb(skb); + break; + case IEEE80211_ADDBA_MSG: + ra_tid = (struct ieee80211_ra_tid *) &skb->cb; + ieee80211_start_tx_ba_cb(local_to_hw(local), + ra_tid->ra, ra_tid->tid); + dev_kfree_skb(skb); + break ; + default: /* should never get here! */ + printk(KERN_ERR "%s: Unknown message type (%d)\n", + wiphy_name(local->hw.wiphy), skb->pkt_type); + dev_kfree_skb(skb); + break; + } + } +} + +/* Remove added headers (e.g., QoS control), encryption header/MIC, etc. to + * make a prepared TX frame (one that has been given to hw) to look like brand + * new IEEE 802.11 frame that is ready to go through TX processing again. + * Also, tx_packet_data in cb is restored from tx_control. */ +static void ieee80211_remove_tx_extra(struct ieee80211_local *local, + struct ieee80211_key *key, + struct sk_buff *skb, + struct ieee80211_tx_control *control) +{ + int hdrlen, iv_len, mic_len; + struct ieee80211_tx_packet_data *pkt_data; + + pkt_data = (struct ieee80211_tx_packet_data *)skb->cb; + pkt_data->ifindex = vif_to_sdata(control->vif)->dev->ifindex; + pkt_data->flags = 0; + if (control->flags & IEEE80211_TXCTL_REQ_TX_STATUS) + pkt_data->flags |= IEEE80211_TXPD_REQ_TX_STATUS; + if (control->flags & IEEE80211_TXCTL_DO_NOT_ENCRYPT) + pkt_data->flags |= IEEE80211_TXPD_DO_NOT_ENCRYPT; + if (control->flags & IEEE80211_TXCTL_REQUEUE) + pkt_data->flags |= IEEE80211_TXPD_REQUEUE; + if (control->flags & IEEE80211_TXCTL_EAPOL_FRAME) + pkt_data->flags |= IEEE80211_TXPD_EAPOL_FRAME; + pkt_data->queue = control->queue; + + hdrlen = ieee80211_get_hdrlen_from_skb(skb); + + if (!key) + goto no_key; + + switch (key->conf.alg) { + case ALG_WEP: + iv_len = WEP_IV_LEN; + mic_len = WEP_ICV_LEN; + break; + case ALG_TKIP: + iv_len = TKIP_IV_LEN; + mic_len = TKIP_ICV_LEN; + break; + case ALG_CCMP: + iv_len = CCMP_HDR_LEN; + mic_len = CCMP_MIC_LEN; + break; + default: + goto no_key; + } + + if (skb->len >= mic_len && + !(key->flags & KEY_FLAG_UPLOADED_TO_HARDWARE)) + skb_trim(skb, skb->len - mic_len); + if (skb->len >= iv_len && skb->len > hdrlen) { + memmove(skb->data + iv_len, skb->data, hdrlen); + skb_pull(skb, iv_len); + } + +no_key: + { + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; + u16 fc = le16_to_cpu(hdr->frame_control); + if ((fc & 0x8C) == 0x88) /* QoS Control Field */ { + fc &= ~IEEE80211_STYPE_QOS_DATA; + hdr->frame_control = cpu_to_le16(fc); + memmove(skb->data + 2, skb->data, hdrlen - 2); + skb_pull(skb, 2); + } + } +} + +static void ieee80211_handle_filtered_frame(struct ieee80211_local *local, + struct sta_info *sta, + struct sk_buff *skb, + struct ieee80211_tx_status *status) +{ + sta->tx_filtered_count++; + + /* + * Clear the TX filter mask for this STA when sending the next + * packet. If the STA went to power save mode, this will happen + * happen when it wakes up for the next time. + */ + sta->flags |= WLAN_STA_CLEAR_PS_FILT; + + /* + * This code races in the following way: + * + * (1) STA sends frame indicating it will go to sleep and does so + * (2) hardware/firmware adds STA to filter list, passes frame up + * (3) hardware/firmware processes TX fifo and suppresses a frame + * (4) we get TX status before having processed the frame and + * knowing that the STA has gone to sleep. + * + * This is actually quite unlikely even when both those events are + * processed from interrupts coming in quickly after one another or + * even at the same time because we queue both TX status events and + * RX frames to be processed by a tasklet and process them in the + * same order that they were received or TX status last. Hence, there + * is no race as long as the frame RX is processed before the next TX + * status, which drivers can ensure, see below. + * + * Note that this can only happen if the hardware or firmware can + * actually add STAs to the filter list, if this is done by the + * driver in response to set_tim() (which will only reduce the race + * this whole filtering tries to solve, not completely solve it) + * this situation cannot happen. + * + * To completely solve this race drivers need to make sure that they + * (a) don't mix the irq-safe/not irq-safe TX status/RX processing + * functions and + * (b) always process RX events before TX status events if ordering + * can be unknown, for example with different interrupt status + * bits. + */ + if (sta->flags & WLAN_STA_PS && + skb_queue_len(&sta->tx_filtered) < STA_MAX_TX_BUFFER) { + ieee80211_remove_tx_extra(local, sta->key, skb, + &status->control); + skb_queue_tail(&sta->tx_filtered, skb); + return; + } + + if (!(sta->flags & WLAN_STA_PS) && + !(status->control.flags & IEEE80211_TXCTL_REQUEUE)) { + /* Software retry the packet once */ + status->control.flags |= IEEE80211_TXCTL_REQUEUE; + ieee80211_remove_tx_extra(local, sta->key, skb, + &status->control); + dev_queue_xmit(skb); + return; + } + + if (net_ratelimit()) + printk(KERN_DEBUG "%s: dropped TX filtered frame, " + "queue_len=%d PS=%d @%lu\n", + wiphy_name(local->hw.wiphy), + skb_queue_len(&sta->tx_filtered), + !!(sta->flags & WLAN_STA_PS), jiffies); + dev_kfree_skb(skb); +} + +void ieee80211_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb, + struct ieee80211_tx_status *status) +{ + struct sk_buff *skb2; + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; + struct ieee80211_local *local = hw_to_local(hw); + u16 frag, type; + struct ieee80211_tx_status_rtap_hdr *rthdr; + struct ieee80211_sub_if_data *sdata; + struct net_device *prev_dev = NULL; + + if (!status) { + printk(KERN_ERR + "%s: ieee80211_tx_status called with NULL status\n", + wiphy_name(local->hw.wiphy)); + dev_kfree_skb(skb); + return; + } + + rcu_read_lock(); + + if (status->excessive_retries) { + struct sta_info *sta; + sta = sta_info_get(local, hdr->addr1); + if (sta) { + if (sta->flags & WLAN_STA_PS) { + /* + * The STA is in power save mode, so assume + * that this TX packet failed because of that. + */ + status->excessive_retries = 0; + status->flags |= IEEE80211_TX_STATUS_TX_FILTERED; + ieee80211_handle_filtered_frame(local, sta, + skb, status); + rcu_read_unlock(); + return; + } + } + } + + if (status->flags & IEEE80211_TX_STATUS_TX_FILTERED) { + struct sta_info *sta; + sta = sta_info_get(local, hdr->addr1); + if (sta) { + ieee80211_handle_filtered_frame(local, sta, skb, + status); + rcu_read_unlock(); + return; + } + } else + rate_control_tx_status(local->mdev, skb, status); + + rcu_read_unlock(); + + ieee80211_led_tx(local, 0); + + /* SNMP counters + * Fragments are passed to low-level drivers as separate skbs, so these + * are actually fragments, not frames. Update frame counters only for + * the first fragment of the frame. */ + + frag = le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_FRAG; + type = le16_to_cpu(hdr->frame_control) & IEEE80211_FCTL_FTYPE; + + if (status->flags & IEEE80211_TX_STATUS_ACK) { + if (frag == 0) { + local->dot11TransmittedFrameCount++; + if (is_multicast_ether_addr(hdr->addr1)) + local->dot11MulticastTransmittedFrameCount++; + if (status->retry_count > 0) + local->dot11RetryCount++; + if (status->retry_count > 1) + local->dot11MultipleRetryCount++; + } + + /* This counter shall be incremented for an acknowledged MPDU + * with an individual address in the address 1 field or an MPDU + * with a multicast address in the address 1 field of type Data + * or Management. */ + if (!is_multicast_ether_addr(hdr->addr1) || + type == IEEE80211_FTYPE_DATA || + type == IEEE80211_FTYPE_MGMT) + local->dot11TransmittedFragmentCount++; + } else { + if (frag == 0) + local->dot11FailedCount++; + } + + /* this was a transmitted frame, but now we want to reuse it */ + skb_orphan(skb); + + /* + * This is a bit racy but we can avoid a lot of work + * with this test... + */ + if (!local->monitors && !local->cooked_mntrs) { + dev_kfree_skb(skb); + return; + } + + /* send frame to monitor interfaces now */ + + if (skb_headroom(skb) < sizeof(*rthdr)) { + printk(KERN_ERR "ieee80211_tx_status: headroom too small\n"); + dev_kfree_skb(skb); + return; + } + + rthdr = (struct ieee80211_tx_status_rtap_hdr*) + skb_push(skb, sizeof(*rthdr)); + + memset(rthdr, 0, sizeof(*rthdr)); + rthdr->hdr.it_len = cpu_to_le16(sizeof(*rthdr)); + rthdr->hdr.it_present = + cpu_to_le32((1 << IEEE80211_RADIOTAP_TX_FLAGS) | + (1 << IEEE80211_RADIOTAP_DATA_RETRIES)); + + if (!(status->flags & IEEE80211_TX_STATUS_ACK) && + !is_multicast_ether_addr(hdr->addr1)) + rthdr->tx_flags |= cpu_to_le16(IEEE80211_RADIOTAP_F_TX_FAIL); + + if ((status->control.flags & IEEE80211_TXCTL_USE_RTS_CTS) && + (status->control.flags & IEEE80211_TXCTL_USE_CTS_PROTECT)) + rthdr->tx_flags |= cpu_to_le16(IEEE80211_RADIOTAP_F_TX_CTS); + else if (status->control.flags & IEEE80211_TXCTL_USE_RTS_CTS) + rthdr->tx_flags |= cpu_to_le16(IEEE80211_RADIOTAP_F_TX_RTS); + + rthdr->data_retries = status->retry_count; + + /* XXX: is this sufficient for BPF? */ + skb_set_mac_header(skb, 0); + skb->ip_summed = CHECKSUM_UNNECESSARY; + skb->pkt_type = PACKET_OTHERHOST; + skb->protocol = htons(ETH_P_802_2); + memset(skb->cb, 0, sizeof(skb->cb)); + + rcu_read_lock(); + list_for_each_entry_rcu(sdata, &local->interfaces, list) { + if (sdata->vif.type == IEEE80211_IF_TYPE_MNTR) { + if (!netif_running(sdata->dev)) + continue; + + if (prev_dev) { + skb2 = skb_clone(skb, GFP_ATOMIC); + if (skb2) { + skb2->dev = prev_dev; + netif_rx(skb2); + } + } + + prev_dev = sdata->dev; + } + } + if (prev_dev) { + skb->dev = prev_dev; + netif_rx(skb); + skb = NULL; + } + rcu_read_unlock(); + dev_kfree_skb(skb); +} +EXPORT_SYMBOL(ieee80211_tx_status); + +struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len, + const struct ieee80211_ops *ops) +{ + struct ieee80211_local *local; + int priv_size; + struct wiphy *wiphy; + + /* Ensure 32-byte alignment of our private data and hw private data. + * We use the wiphy priv data for both our ieee80211_local and for + * the driver's private data + * + * In memory it'll be like this: + * + * +-------------------------+ + * | struct wiphy | + * +-------------------------+ + * | struct ieee80211_local | + * +-------------------------+ + * | driver's private data | + * +-------------------------+ + * + */ + priv_size = ((sizeof(struct ieee80211_local) + + NETDEV_ALIGN_CONST) & ~NETDEV_ALIGN_CONST) + + priv_data_len; + + wiphy = wiphy_new(&mac80211_config_ops, priv_size); + + if (!wiphy) + return NULL; + + wiphy->privid = mac80211_wiphy_privid; + + local = wiphy_priv(wiphy); + local->hw.wiphy = wiphy; + + local->hw.priv = (char *)local + + ((sizeof(struct ieee80211_local) + + NETDEV_ALIGN_CONST) & ~NETDEV_ALIGN_CONST); + + BUG_ON(!ops->tx); + BUG_ON(!ops->start); + BUG_ON(!ops->stop); + BUG_ON(!ops->config); + BUG_ON(!ops->add_interface); + BUG_ON(!ops->remove_interface); + BUG_ON(!ops->configure_filter); + local->ops = ops; + + local->hw.queues = 1; /* default */ + + local->bridge_packets = 1; + + local->rts_threshold = IEEE80211_MAX_RTS_THRESHOLD; + local->fragmentation_threshold = IEEE80211_MAX_FRAG_THRESHOLD; + local->short_retry_limit = 7; + local->long_retry_limit = 4; + local->hw.conf.radio_enabled = 1; + + INIT_LIST_HEAD(&local->interfaces); + + spin_lock_init(&local->key_lock); + + INIT_DELAYED_WORK(&local->scan_work, ieee80211_sta_scan_work); + + sta_info_init(local); + + tasklet_init(&local->tx_pending_tasklet, ieee80211_tx_pending, + (unsigned long)local); + tasklet_disable(&local->tx_pending_tasklet); + + tasklet_init(&local->tasklet, + ieee80211_tasklet_handler, + (unsigned long) local); + tasklet_disable(&local->tasklet); + + skb_queue_head_init(&local->skb_queue); + skb_queue_head_init(&local->skb_queue_unreliable); + + return local_to_hw(local); +} +EXPORT_SYMBOL(ieee80211_alloc_hw); + +int ieee80211_register_hw(struct ieee80211_hw *hw) +{ + struct ieee80211_local *local = hw_to_local(hw); + const char *name; + int result; + enum ieee80211_band band; + struct net_device *mdev; + struct ieee80211_sub_if_data *sdata; + + /* + * generic code guarantees at least one band, + * set this very early because much code assumes + * that hw.conf.channel is assigned + */ + for (band = 0; band < IEEE80211_NUM_BANDS; band++) { + struct ieee80211_supported_band *sband; + + sband = local->hw.wiphy->bands[band]; + if (sband) { + /* init channel we're on */ + local->hw.conf.channel = + local->oper_channel = + local->scan_channel = &sband->channels[0]; + break; + } + } + + result = wiphy_register(local->hw.wiphy); + if (result < 0) + return result; + + /* for now, mdev needs sub_if_data :/ */ + mdev = alloc_netdev(sizeof(struct ieee80211_sub_if_data), + "wmaster%d", ether_setup); + if (!mdev) + goto fail_mdev_alloc; + + sdata = IEEE80211_DEV_TO_SUB_IF(mdev); + mdev->ieee80211_ptr = &sdata->wdev; + sdata->wdev.wiphy = local->hw.wiphy; + + local->mdev = mdev; + + ieee80211_rx_bss_list_init(mdev); + + mdev->hard_start_xmit = ieee80211_master_start_xmit; + mdev->open = ieee80211_master_open; + mdev->stop = ieee80211_master_stop; + mdev->type = ARPHRD_IEEE80211; + mdev->header_ops = &ieee80211_header_ops; + mdev->set_multicast_list = ieee80211_master_set_multicast_list; + + sdata->vif.type = IEEE80211_IF_TYPE_AP; + sdata->dev = mdev; + sdata->local = local; + sdata->u.ap.force_unicast_rateidx = -1; + sdata->u.ap.max_ratectrl_rateidx = -1; + ieee80211_if_sdata_init(sdata); + + /* no RCU needed since we're still during init phase */ + list_add_tail(&sdata->list, &local->interfaces); + + name = wiphy_dev(local->hw.wiphy)->driver->name; + local->hw.workqueue = create_singlethread_workqueue(name); + if (!local->hw.workqueue) { + result = -ENOMEM; + goto fail_workqueue; + } + + /* + * The hardware needs headroom for sending the frame, + * and we need some headroom for passing the frame to monitor + * interfaces, but never both at the same time. + */ + local->tx_headroom = max_t(unsigned int , local->hw.extra_tx_headroom, + sizeof(struct ieee80211_tx_status_rtap_hdr)); + + debugfs_hw_add(local); + + local->hw.conf.beacon_int = 1000; + + local->wstats_flags |= local->hw.max_rssi ? + IW_QUAL_LEVEL_UPDATED : IW_QUAL_LEVEL_INVALID; + local->wstats_flags |= local->hw.max_signal ? + IW_QUAL_QUAL_UPDATED : IW_QUAL_QUAL_INVALID; + local->wstats_flags |= local->hw.max_noise ? + IW_QUAL_NOISE_UPDATED : IW_QUAL_NOISE_INVALID; + if (local->hw.max_rssi < 0 || local->hw.max_noise < 0) + local->wstats_flags |= IW_QUAL_DBM; + + result = sta_info_start(local); + if (result < 0) + goto fail_sta_info; + + rtnl_lock(); + result = dev_alloc_name(local->mdev, local->mdev->name); + if (result < 0) + goto fail_dev; + + memcpy(local->mdev->dev_addr, local->hw.wiphy->perm_addr, ETH_ALEN); + SET_NETDEV_DEV(local->mdev, wiphy_dev(local->hw.wiphy)); + + result = register_netdevice(local->mdev); + if (result < 0) + goto fail_dev; + + ieee80211_debugfs_add_netdev(IEEE80211_DEV_TO_SUB_IF(local->mdev)); + ieee80211_if_set_type(local->mdev, IEEE80211_IF_TYPE_AP); + + result = ieee80211_init_rate_ctrl_alg(local, + hw->rate_control_algorithm); + if (result < 0) { + printk(KERN_DEBUG "%s: Failed to initialize rate control " + "algorithm\n", wiphy_name(local->hw.wiphy)); + goto fail_rate; + } + + result = ieee80211_wep_init(local); + + if (result < 0) { + printk(KERN_DEBUG "%s: Failed to initialize wep\n", + wiphy_name(local->hw.wiphy)); + goto fail_wep; + } + + ieee80211_install_qdisc(local->mdev); + + /* add one default STA interface */ + result = ieee80211_if_add(local->mdev, "wlan%d", NULL, + IEEE80211_IF_TYPE_STA, NULL); + if (result) + printk(KERN_WARNING "%s: Failed to add default virtual iface\n", + wiphy_name(local->hw.wiphy)); + + local->reg_state = IEEE80211_DEV_REGISTERED; + rtnl_unlock(); + + ieee80211_led_init(local); + + return 0; + +fail_wep: + rate_control_deinitialize(local); +fail_rate: + ieee80211_debugfs_remove_netdev(IEEE80211_DEV_TO_SUB_IF(local->mdev)); + unregister_netdevice(local->mdev); +fail_dev: + rtnl_unlock(); + sta_info_stop(local); +fail_sta_info: + debugfs_hw_del(local); + destroy_workqueue(local->hw.workqueue); +fail_workqueue: + ieee80211_if_free(local->mdev); + local->mdev = NULL; +fail_mdev_alloc: + wiphy_unregister(local->hw.wiphy); + return result; +} +EXPORT_SYMBOL(ieee80211_register_hw); + +void ieee80211_unregister_hw(struct ieee80211_hw *hw) +{ + struct ieee80211_local *local = hw_to_local(hw); + struct ieee80211_sub_if_data *sdata, *tmp; + + tasklet_kill(&local->tx_pending_tasklet); + tasklet_kill(&local->tasklet); + + rtnl_lock(); + + BUG_ON(local->reg_state != IEEE80211_DEV_REGISTERED); + + local->reg_state = IEEE80211_DEV_UNREGISTERED; + + /* + * At this point, interface list manipulations are fine + * because the driver cannot be handing us frames any + * more and the tasklet is killed. + */ + + /* + * First, we remove all non-master interfaces. Do this because they + * may have bss pointer dependency on the master, and when we free + * the master these would be freed as well, breaking our list + * iteration completely. + */ + list_for_each_entry_safe(sdata, tmp, &local->interfaces, list) { + if (sdata->dev == local->mdev) + continue; + list_del(&sdata->list); + __ieee80211_if_del(local, sdata); + } + + /* then, finally, remove the master interface */ + __ieee80211_if_del(local, IEEE80211_DEV_TO_SUB_IF(local->mdev)); + + rtnl_unlock(); + + ieee80211_rx_bss_list_deinit(local->mdev); + ieee80211_clear_tx_pending(local); + sta_info_stop(local); + rate_control_deinitialize(local); + debugfs_hw_del(local); + + if (skb_queue_len(&local->skb_queue) + || skb_queue_len(&local->skb_queue_unreliable)) + printk(KERN_WARNING "%s: skb_queue not empty\n", + wiphy_name(local->hw.wiphy)); + skb_queue_purge(&local->skb_queue); + skb_queue_purge(&local->skb_queue_unreliable); + + destroy_workqueue(local->hw.workqueue); + wiphy_unregister(local->hw.wiphy); + ieee80211_wep_free(local); + ieee80211_led_exit(local); + ieee80211_if_free(local->mdev); + local->mdev = NULL; +} +EXPORT_SYMBOL(ieee80211_unregister_hw); + +void ieee80211_free_hw(struct ieee80211_hw *hw) +{ + struct ieee80211_local *local = hw_to_local(hw); + + wiphy_free(local->hw.wiphy); +} +EXPORT_SYMBOL(ieee80211_free_hw); + +static int __init ieee80211_init(void) +{ + struct sk_buff *skb; + int ret; + + BUILD_BUG_ON(sizeof(struct ieee80211_tx_packet_data) > sizeof(skb->cb)); + + ret = rc80211_pid_init(); + if (ret) + goto out; + + ret = ieee80211_wme_register(); + if (ret) { + printk(KERN_DEBUG "ieee80211_init: failed to " + "initialize WME (err=%d)\n", ret); + goto out_cleanup_pid; + } + + ieee80211_debugfs_netdev_init(); + + return 0; + + out_cleanup_pid: + rc80211_pid_exit(); + out: + return ret; +} + +static void __exit ieee80211_exit(void) +{ + rc80211_pid_exit(); + + /* + * For key todo, it'll be empty by now but the work + * might still be scheduled. + */ + flush_scheduled_work(); + + if (mesh_allocated) + ieee80211s_stop(); + + ieee80211_wme_unregister(); + ieee80211_debugfs_netdev_exit(); +} + + +subsys_initcall(ieee80211_init); +module_exit(ieee80211_exit); + +MODULE_DESCRIPTION("IEEE 802.11 subsystem"); +MODULE_LICENSE("GPL"); |