diff options
Diffstat (limited to 'net/mac80211')
| -rw-r--r-- | net/mac80211/Kconfig | 7 | ||||
| -rw-r--r-- | net/mac80211/main.c | 22 | ||||
| -rw-r--r-- | net/mac80211/mlme.c | 38 | ||||
| -rw-r--r-- | net/mac80211/pm.c | 15 | ||||
| -rw-r--r-- | net/mac80211/rc80211_minstrel.c | 4 | ||||
| -rw-r--r-- | net/mac80211/rc80211_pid_algo.c | 73 | ||||
| -rw-r--r-- | net/mac80211/rx.c | 15 | ||||
| -rw-r--r-- | net/mac80211/tx.c | 2 | ||||
| -rw-r--r-- | net/mac80211/wext.c | 43 |
9 files changed, 139 insertions, 80 deletions
diff --git a/net/mac80211/Kconfig b/net/mac80211/Kconfig index f3d9ae350fb6..ecc3faf9f11a 100644 --- a/net/mac80211/Kconfig +++ b/net/mac80211/Kconfig @@ -202,10 +202,3 @@ config MAC80211_DEBUG_COUNTERS and show them in debugfs. If unsure, say N. - -config MAC80211_VERBOSE_SPECT_MGMT_DEBUG - bool "Verbose Spectrum Management (IEEE 802.11h)debugging" - depends on MAC80211_DEBUG_MENU - ---help--- - Say Y here to print out verbose Spectrum Management (IEEE 802.11h) - debug messages. diff --git a/net/mac80211/main.c b/net/mac80211/main.c index a6f1d8a869bc..14134193cd17 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -258,7 +258,7 @@ int ieee80211_hw_config(struct ieee80211_local *local, u32 changed) (chan->max_power - local->power_constr_level) : chan->max_power; - if (local->user_power_level) + if (local->user_power_level >= 0) power = min(power, local->user_power_level); if (local->hw.conf.power_level != power) { @@ -757,6 +757,7 @@ struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len, local->hw.conf.long_frame_max_tx_count = 4; local->hw.conf.short_frame_max_tx_count = 7; local->hw.conf.radio_enabled = true; + local->user_power_level = -1; INIT_LIST_HEAD(&local->interfaces); mutex_init(&local->iflist_mtx); @@ -909,6 +910,13 @@ int ieee80211_register_hw(struct ieee80211_hw *hw) if (result < 0) goto fail_sta_info; + result = ieee80211_wep_init(local); + if (result < 0) { + printk(KERN_DEBUG "%s: Failed to initialize wep: %d\n", + wiphy_name(local->hw.wiphy), result); + goto fail_wep; + } + rtnl_lock(); result = dev_alloc_name(local->mdev, local->mdev->name); if (result < 0) @@ -930,14 +938,6 @@ int ieee80211_register_hw(struct ieee80211_hw *hw) goto fail_rate; } - result = ieee80211_wep_init(local); - - if (result < 0) { - printk(KERN_DEBUG "%s: Failed to initialize wep: %d\n", - wiphy_name(local->hw.wiphy), result); - goto fail_wep; - } - /* add one default STA interface if supported */ if (local->hw.wiphy->interface_modes & BIT(NL80211_IFTYPE_STATION)) { result = ieee80211_if_add(local, "wlan%d", NULL, @@ -967,13 +967,13 @@ int ieee80211_register_hw(struct ieee80211_hw *hw) return 0; -fail_wep: - rate_control_deinitialize(local); fail_rate: unregister_netdevice(local->mdev); local->mdev = NULL; fail_dev: rtnl_unlock(); + ieee80211_wep_free(local); +fail_wep: sta_info_stop(local); fail_sta_info: debugfs_hw_del(local); diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 7ecda9d59d8a..132938b073dc 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -441,6 +441,9 @@ static bool ieee80211_check_tim(struct ieee802_11_elems *elems, u16 aid) u8 index, indexn1, indexn2; struct ieee80211_tim_ie *tim = (struct ieee80211_tim_ie *) elems->tim; + if (unlikely(!tim || elems->tim_len < 4)) + return false; + aid &= 0x3fff; index = aid / 8; mask = 1 << (aid & 7); @@ -945,9 +948,13 @@ void ieee80211_beacon_loss_work(struct work_struct *work) u.mgd.beacon_loss_work); struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; - printk(KERN_DEBUG "%s: driver reports beacon loss from AP %pM " - "- sending probe request\n", sdata->dev->name, - sdata->u.mgd.bssid); +#ifdef CONFIG_MAC80211_VERBOSE_DEBUG + if (net_ratelimit()) { + printk(KERN_DEBUG "%s: driver reports beacon loss from AP %pM " + "- sending probe request\n", sdata->dev->name, + sdata->u.mgd.bssid); + } +#endif ifmgd->flags |= IEEE80211_STA_PROBEREQ_POLL; ieee80211_send_probe_req(sdata, ifmgd->bssid, ifmgd->ssid, @@ -1007,9 +1014,13 @@ static void ieee80211_associated(struct ieee80211_sub_if_data *sdata) (local->hw.conf.flags & IEEE80211_CONF_PS)) && time_after(jiffies, ifmgd->last_beacon + IEEE80211_MONITORING_INTERVAL)) { - printk(KERN_DEBUG "%s: beacon loss from AP %pM " - "- sending probe request\n", - sdata->dev->name, ifmgd->bssid); +#ifdef CONFIG_MAC80211_VERBOSE_DEBUG + if (net_ratelimit()) { + printk(KERN_DEBUG "%s: beacon loss from AP %pM " + "- sending probe request\n", + sdata->dev->name, ifmgd->bssid); + } +#endif ifmgd->flags |= IEEE80211_STA_PROBEREQ_POLL; ieee80211_send_probe_req(sdata, ifmgd->bssid, ifmgd->ssid, ifmgd->ssid_len, NULL, 0); @@ -1355,7 +1366,7 @@ static void ieee80211_rx_mgmt_assoc_resp(struct ieee80211_sub_if_data *sdata, for (i = 0; i < elems.ext_supp_rates_len; i++) { int rate = (elems.ext_supp_rates[i] & 0x7f) * 5; - bool is_basic = !!(elems.supp_rates[i] & 0x80); + bool is_basic = !!(elems.ext_supp_rates[i] & 0x80); if (rate > 110) have_higher_than_11mbit = true; @@ -1902,9 +1913,17 @@ static void ieee80211_sta_work(struct work_struct *work) static void ieee80211_restart_sta_timer(struct ieee80211_sub_if_data *sdata) { - if (sdata->vif.type == NL80211_IFTYPE_STATION) + if (sdata->vif.type == NL80211_IFTYPE_STATION) { + /* + * Need to update last_beacon to avoid beacon loss + * test to trigger. + */ + sdata->u.mgd.last_beacon = jiffies; + + queue_work(sdata->local->hw.workqueue, &sdata->u.mgd.work); + } } /* interface setup */ @@ -2105,12 +2124,13 @@ void ieee80211_dynamic_ps_enable_work(struct work_struct *work) struct ieee80211_local *local = container_of(work, struct ieee80211_local, dynamic_ps_enable_work); + /* XXX: using scan_sdata is completely broken! */ struct ieee80211_sub_if_data *sdata = local->scan_sdata; if (local->hw.conf.flags & IEEE80211_CONF_PS) return; - if (local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK) + if (local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK && sdata) ieee80211_send_nullfunc(local, sdata, 1); local->hw.conf.flags |= IEEE80211_CONF_PS; diff --git a/net/mac80211/pm.c b/net/mac80211/pm.c index 027302326498..81985d27cbda 100644 --- a/net/mac80211/pm.c +++ b/net/mac80211/pm.c @@ -156,8 +156,19 @@ int __ieee80211_resume(struct ieee80211_hw *hw) case NL80211_IFTYPE_ADHOC: case NL80211_IFTYPE_AP: case NL80211_IFTYPE_MESH_POINT: - WARN_ON(ieee80211_if_config(sdata, changed)); - ieee80211_bss_info_change_notify(sdata, ~0); + /* + * Driver's config_interface can fail if rfkill is + * enabled. Accommodate this return code. + * FIXME: When mac80211 has knowledge of rfkill + * state the code below can change back to: + * WARN(ieee80211_if_config(sdata, changed)); + * ieee80211_bss_info_change_notify(sdata, ~0); + */ + if (ieee80211_if_config(sdata, changed)) + printk(KERN_DEBUG "%s: failed to configure interface during resume\n", + sdata->dev->name); + else + ieee80211_bss_info_change_notify(sdata, ~0); break; case NL80211_IFTYPE_WDS: break; diff --git a/net/mac80211/rc80211_minstrel.c b/net/mac80211/rc80211_minstrel.c index 3824990d340b..d9233ec50610 100644 --- a/net/mac80211/rc80211_minstrel.c +++ b/net/mac80211/rc80211_minstrel.c @@ -476,8 +476,8 @@ minstrel_alloc_sta(void *priv, struct ieee80211_sta *sta, gfp_t gfp) return NULL; for (i = 0; i < IEEE80211_NUM_BANDS; i++) { - sband = hw->wiphy->bands[hw->conf.channel->band]; - if (sband->n_bitrates > max_rates) + sband = hw->wiphy->bands[i]; + if (sband && sband->n_bitrates > max_rates) max_rates = sband->n_bitrates; } diff --git a/net/mac80211/rc80211_pid_algo.c b/net/mac80211/rc80211_pid_algo.c index b16801cde06f..8bef9a1262ff 100644 --- a/net/mac80211/rc80211_pid_algo.c +++ b/net/mac80211/rc80211_pid_algo.c @@ -317,13 +317,44 @@ rate_control_pid_rate_init(void *priv, struct ieee80211_supported_band *sband, struct ieee80211_sta *sta, void *priv_sta) { struct rc_pid_sta_info *spinfo = priv_sta; + struct rc_pid_info *pinfo = priv; + struct rc_pid_rateinfo *rinfo = pinfo->rinfo; struct sta_info *si; + int i, j, tmp; + bool s; /* TODO: This routine should consider using RSSI from previous packets * as we need to have IEEE 802.1X auth succeed immediately after assoc.. * Until that method is implemented, we will use the lowest supported * rate as a workaround. */ + /* Sort the rates. This is optimized for the most common case (i.e. + * almost-sorted CCK+OFDM rates). Kind of bubble-sort with reversed + * mapping too. */ + for (i = 0; i < sband->n_bitrates; i++) { + rinfo[i].index = i; + rinfo[i].rev_index = i; + if (RC_PID_FAST_START) + rinfo[i].diff = 0; + else + rinfo[i].diff = i * pinfo->norm_offset; + } + for (i = 1; i < sband->n_bitrates; i++) { + s = 0; + for (j = 0; j < sband->n_bitrates - i; j++) + if (unlikely(sband->bitrates[rinfo[j].index].bitrate > + sband->bitrates[rinfo[j + 1].index].bitrate)) { + tmp = rinfo[j].index; + rinfo[j].index = rinfo[j + 1].index; + rinfo[j + 1].index = tmp; + rinfo[rinfo[j].index].rev_index = j; + rinfo[rinfo[j + 1].index].rev_index = j + 1; + s = 1; + } + if (!s) + break; + } + spinfo->txrate_idx = rate_lowest_index(sband, sta); /* HACK */ si = container_of(sta, struct sta_info, sta); @@ -336,21 +367,22 @@ static void *rate_control_pid_alloc(struct ieee80211_hw *hw, struct rc_pid_info *pinfo; struct rc_pid_rateinfo *rinfo; struct ieee80211_supported_band *sband; - int i, j, tmp; - bool s; + int i, max_rates = 0; #ifdef CONFIG_MAC80211_DEBUGFS struct rc_pid_debugfs_entries *de; #endif - sband = hw->wiphy->bands[hw->conf.channel->band]; - pinfo = kmalloc(sizeof(*pinfo), GFP_ATOMIC); if (!pinfo) return NULL; - /* We can safely assume that sband won't change unless we get - * reinitialized. */ - rinfo = kmalloc(sizeof(*rinfo) * sband->n_bitrates, GFP_ATOMIC); + for (i = 0; i < IEEE80211_NUM_BANDS; i++) { + sband = hw->wiphy->bands[i]; + if (sband && sband->n_bitrates > max_rates) + max_rates = sband->n_bitrates; + } + + rinfo = kmalloc(sizeof(*rinfo) * max_rates, GFP_ATOMIC); if (!rinfo) { kfree(pinfo); return NULL; @@ -368,33 +400,6 @@ static void *rate_control_pid_alloc(struct ieee80211_hw *hw, pinfo->rinfo = rinfo; pinfo->oldrate = 0; - /* Sort the rates. This is optimized for the most common case (i.e. - * almost-sorted CCK+OFDM rates). Kind of bubble-sort with reversed - * mapping too. */ - for (i = 0; i < sband->n_bitrates; i++) { - rinfo[i].index = i; - rinfo[i].rev_index = i; - if (RC_PID_FAST_START) - rinfo[i].diff = 0; - else - rinfo[i].diff = i * pinfo->norm_offset; - } - for (i = 1; i < sband->n_bitrates; i++) { - s = 0; - for (j = 0; j < sband->n_bitrates - i; j++) - if (unlikely(sband->bitrates[rinfo[j].index].bitrate > - sband->bitrates[rinfo[j + 1].index].bitrate)) { - tmp = rinfo[j].index; - rinfo[j].index = rinfo[j + 1].index; - rinfo[j + 1].index = tmp; - rinfo[rinfo[j].index].rev_index = j; - rinfo[rinfo[j + 1].index].rev_index = j + 1; - s = 1; - } - if (!s) - break; - } - #ifdef CONFIG_MAC80211_DEBUGFS de = &pinfo->dentries; de->target = debugfs_create_u32("target_pf", S_IRUSR | S_IWUSR, diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index 64ebe664effc..9776f73c51ad 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -29,6 +29,7 @@ static u8 ieee80211_sta_manage_reorder_buf(struct ieee80211_hw *hw, struct tid_ampdu_rx *tid_agg_rx, struct sk_buff *skb, + struct ieee80211_rx_status *status, u16 mpdu_seq_num, int bar_req); /* @@ -1396,7 +1397,7 @@ ieee80211_deliver_skb(struct ieee80211_rx_data *rx) * mac80211. That also explains the __skb_push() * below. */ - align = (unsigned long)skb->data & 4; + align = (unsigned long)skb->data & 3; if (align) { if (WARN_ON(skb_headroom(skb) < 3)) { dev_kfree_skb(skb); @@ -1688,7 +1689,7 @@ ieee80211_rx_h_ctrl(struct ieee80211_rx_data *rx) /* manage reordering buffer according to requested */ /* sequence number */ rcu_read_lock(); - ieee80211_sta_manage_reorder_buf(hw, tid_agg_rx, NULL, + ieee80211_sta_manage_reorder_buf(hw, tid_agg_rx, NULL, NULL, start_seq_num, 1); rcu_read_unlock(); return RX_DROP_UNUSABLE; @@ -2293,6 +2294,7 @@ static inline u16 seq_sub(u16 sq1, u16 sq2) static u8 ieee80211_sta_manage_reorder_buf(struct ieee80211_hw *hw, struct tid_ampdu_rx *tid_agg_rx, struct sk_buff *skb, + struct ieee80211_rx_status *rxstatus, u16 mpdu_seq_num, int bar_req) { @@ -2374,6 +2376,8 @@ static u8 ieee80211_sta_manage_reorder_buf(struct ieee80211_hw *hw, /* put the frame in the reordering buffer */ tid_agg_rx->reorder_buf[index] = skb; + memcpy(tid_agg_rx->reorder_buf[index]->cb, rxstatus, + sizeof(*rxstatus)); tid_agg_rx->stored_mpdu_num++; /* release the buffer until next missing frame */ index = seq_sub(tid_agg_rx->head_seq_num, tid_agg_rx->ssn) @@ -2399,7 +2403,8 @@ static u8 ieee80211_sta_manage_reorder_buf(struct ieee80211_hw *hw, } static u8 ieee80211_rx_reorder_ampdu(struct ieee80211_local *local, - struct sk_buff *skb) + struct sk_buff *skb, + struct ieee80211_rx_status *status) { struct ieee80211_hw *hw = &local->hw; struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; @@ -2448,7 +2453,7 @@ static u8 ieee80211_rx_reorder_ampdu(struct ieee80211_local *local, /* according to mpdu sequence number deal with reordering buffer */ mpdu_seq_num = (sc & IEEE80211_SCTL_SEQ) >> 4; - ret = ieee80211_sta_manage_reorder_buf(hw, tid_agg_rx, skb, + ret = ieee80211_sta_manage_reorder_buf(hw, tid_agg_rx, skb, status, mpdu_seq_num, 0); end_reorder: return ret; @@ -2512,7 +2517,7 @@ void __ieee80211_rx(struct ieee80211_hw *hw, struct sk_buff *skb, return; } - if (!ieee80211_rx_reorder_ampdu(local, skb)) + if (!ieee80211_rx_reorder_ampdu(local, skb, status)) __ieee80211_rx_handle_packet(hw, skb, status, rate); rcu_read_unlock(); diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index 3fb04a86444d..63656266d567 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -772,7 +772,7 @@ ieee80211_tx_h_fragment(struct ieee80211_tx_data *tx) hdrlen = ieee80211_hdrlen(hdr->frame_control); /* internal error, why is TX_FRAGMENTED set? */ - if (WARN_ON(skb->len <= frag_threshold)) + if (WARN_ON(skb->len + FCS_LEN <= frag_threshold)) return TX_DROP; /* diff --git a/net/mac80211/wext.c b/net/mac80211/wext.c index deb4ecec122a..959aa8379ccf 100644 --- a/net/mac80211/wext.c +++ b/net/mac80211/wext.c @@ -417,6 +417,7 @@ static int ieee80211_ioctl_siwtxpower(struct net_device *dev, { struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); struct ieee80211_channel* chan = local->hw.conf.channel; + bool reconf = false; u32 reconf_flags = 0; int new_power_level; @@ -427,14 +428,38 @@ static int ieee80211_ioctl_siwtxpower(struct net_device *dev, if (!chan) return -EINVAL; - if (data->txpower.fixed) - new_power_level = min(data->txpower.value, chan->max_power); - else /* Automatic power level setting */ - new_power_level = chan->max_power; + /* only change when not disabling */ + if (!data->txpower.disabled) { + if (data->txpower.fixed) { + if (data->txpower.value < 0) + return -EINVAL; + new_power_level = data->txpower.value; + /* + * Debatable, but we cannot do a fixed power + * level above the regulatory constraint. + * Use "iwconfig wlan0 txpower 15dBm" instead. + */ + if (new_power_level > chan->max_power) + return -EINVAL; + } else { + /* + * Automatic power level setting, max being the value + * passed in from userland. + */ + if (data->txpower.value < 0) + new_power_level = -1; + else + new_power_level = data->txpower.value; + } + + reconf = true; - local->user_power_level = new_power_level; - if (local->hw.conf.power_level != new_power_level) - reconf_flags |= IEEE80211_CONF_CHANGE_POWER; + /* + * ieee80211_hw_config() will limit to the channel's + * max power and possibly power constraint from AP. + */ + local->user_power_level = new_power_level; + } if (local->hw.conf.radio_enabled != !(data->txpower.disabled)) { local->hw.conf.radio_enabled = !(data->txpower.disabled); @@ -442,7 +467,7 @@ static int ieee80211_ioctl_siwtxpower(struct net_device *dev, ieee80211_led_radio(local, local->hw.conf.radio_enabled); } - if (reconf_flags) + if (reconf || reconf_flags) ieee80211_hw_config(local, reconf_flags); return 0; @@ -530,7 +555,7 @@ static int ieee80211_ioctl_giwfrag(struct net_device *dev, struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); frag->value = local->fragmentation_threshold; - frag->disabled = (frag->value >= IEEE80211_MAX_RTS_THRESHOLD); + frag->disabled = (frag->value >= IEEE80211_MAX_FRAG_THRESHOLD); frag->fixed = 1; return 0; |