diff options
Diffstat (limited to 'sound/pci/ice1712/juli.c')
| -rw-r--r-- | sound/pci/ice1712/juli.c | 230 |
1 files changed, 230 insertions, 0 deletions
diff --git a/sound/pci/ice1712/juli.c b/sound/pci/ice1712/juli.c new file mode 100644 index 000000000000..3fb297b969cd --- /dev/null +++ b/sound/pci/ice1712/juli.c @@ -0,0 +1,230 @@ +/* + * ALSA driver for ICEnsemble VT1724 (Envy24HT) + * + * Lowlevel functions for ESI Juli@ cards + * + * Copyright (c) 2004 Jaroslav Kysela <perex@suse.cz> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include <sound/driver.h> +#include <asm/io.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <sound/core.h> + +#include "ice1712.h" +#include "envy24ht.h" +#include "juli.h" + +/* + * chip addresses on I2C bus + */ +#define AK4114_ADDR 0x20 /* S/PDIF receiver */ +#define AK4358_ADDR 0x22 /* DAC */ + +/* + * GPIO pins + */ +#define GPIO_FREQ_MASK (3<<0) +#define GPIO_FREQ_32KHZ (0<<0) +#define GPIO_FREQ_44KHZ (1<<0) +#define GPIO_FREQ_48KHZ (2<<0) +#define GPIO_MULTI_MASK (3<<2) +#define GPIO_MULTI_4X (0<<2) +#define GPIO_MULTI_2X (1<<2) +#define GPIO_MULTI_1X (2<<2) /* also external */ +#define GPIO_MULTI_HALF (3<<2) +#define GPIO_INTERNAL_CLOCK (1<<4) +#define GPIO_ANALOG_PRESENT (1<<5) /* RO only: 0 = present */ +#define GPIO_RXMCLK_SEL (1<<7) /* must be 0 */ +#define GPIO_AK5385A_CKS0 (1<<8) +#define GPIO_AK5385A_DFS0 (1<<9) /* swapped with DFS1 according doc? */ +#define GPIO_AK5385A_DFS1 (1<<10) +#define GPIO_DIGOUT_MONITOR (1<<11) /* 1 = active */ +#define GPIO_DIGIN_MONITOR (1<<12) /* 1 = active */ +#define GPIO_ANAIN_MONITOR (1<<13) /* 1 = active */ +#define GPIO_AK5385A_MCLK (1<<14) /* must be 0 */ +#define GPIO_MUTE_CONTROL (1<<15) /* 0 = off, 1 = on */ + +static void juli_ak4114_write(void *private_data, unsigned char reg, unsigned char val) +{ + snd_vt1724_write_i2c((ice1712_t *)private_data, AK4114_ADDR, reg, val); +} + +static unsigned char juli_ak4114_read(void *private_data, unsigned char reg) +{ + return snd_vt1724_read_i2c((ice1712_t *)private_data, AK4114_ADDR, reg); +} + +/* + * AK4358 section + */ + +static void juli_akm_lock(akm4xxx_t *ak, int chip) +{ +} + +static void juli_akm_unlock(akm4xxx_t *ak, int chip) +{ +} + +static void juli_akm_write(akm4xxx_t *ak, int chip, + unsigned char addr, unsigned char data) +{ + ice1712_t *ice = ak->private_data[0]; + + snd_assert(chip == 0, return); + snd_vt1724_write_i2c(ice, AK4358_ADDR, addr, data); +} + +/* + * change the rate of envy24HT, AK4358 + */ +static void juli_akm_set_rate_val(akm4xxx_t *ak, unsigned int rate) +{ + unsigned char old, tmp, dfs; + + if (rate == 0) /* no hint - S/PDIF input is master, simply return */ + return; + + /* adjust DFS on codecs */ + if (rate > 96000) + dfs = 2; + else if (rate > 48000) + dfs = 1; + else + dfs = 0; + + tmp = snd_akm4xxx_get(ak, 0, 2); + old = (tmp >> 4) & 0x03; + if (old == dfs) + return; + /* reset DFS */ + snd_akm4xxx_reset(ak, 1); + tmp = snd_akm4xxx_get(ak, 0, 2); + tmp &= ~(0x03 << 4); + tmp |= dfs << 4; + snd_akm4xxx_set(ak, 0, 2, tmp); + snd_akm4xxx_reset(ak, 0); +} + +static akm4xxx_t akm_juli_dac __devinitdata = { + .type = SND_AK4358, + .num_dacs = 2, + .ops = { + .lock = juli_akm_lock, + .unlock = juli_akm_unlock, + .write = juli_akm_write, + .set_rate_val = juli_akm_set_rate_val + } +}; + +static int __devinit juli_add_controls(ice1712_t *ice) +{ + return snd_ice1712_akm4xxx_build_controls(ice); +} + +/* + * initialize the chip + */ +static int __devinit juli_init(ice1712_t *ice) +{ + static unsigned char ak4114_init_vals[] = { + /* AK4117_REG_PWRDN */ AK4114_RST | AK4114_PWN | AK4114_OCKS0 | AK4114_OCKS1, + /* AK4114_REQ_FORMAT */ AK4114_DIF_I24I2S, + /* AK4114_REG_IO0 */ AK4114_TX1E, + /* AK4114_REG_IO1 */ AK4114_EFH_1024 | AK4114_DIT | AK4114_IPS(1), + /* AK4114_REG_INT0_MASK */ 0, + /* AK4114_REG_INT1_MASK */ 0 + }; + static unsigned char ak4114_init_txcsb[] = { + 0x41, 0x02, 0x2c, 0x00, 0x00 + }; + int err; + akm4xxx_t *ak; + +#if 0 + for (err = 0; err < 0x20; err++) + juli_ak4114_read(ice, err); + juli_ak4114_write(ice, 0, 0x0f); + juli_ak4114_read(ice, 0); + juli_ak4114_read(ice, 1); +#endif + err = snd_ak4114_create(ice->card, + juli_ak4114_read, + juli_ak4114_write, + ak4114_init_vals, ak4114_init_txcsb, + ice, &ice->spec.juli.ak4114); + if (err < 0) + return err; + + ice->spec.juli.analog = ice->gpio.get_data(ice) & GPIO_ANALOG_PRESENT; + + if (ice->spec.juli.analog) { + printk(KERN_INFO "juli@: analog I/O detected\n"); + ice->num_total_dacs = 2; + ice->num_total_adcs = 2; + + ak = ice->akm = kcalloc(1, sizeof(akm4xxx_t), GFP_KERNEL); + if (! ak) + return -ENOMEM; + ice->akm_codecs = 1; + if ((err = snd_ice1712_akm4xxx_init(ak, &akm_juli_dac, NULL, ice)) < 0) + return err; + } + + return 0; +} + + +/* + * Juli@ boards don't provide the EEPROM data except for the vendor IDs. + * hence the driver needs to sets up it properly. + */ + +static unsigned char juli_eeprom[] __devinitdata = { + 0x20, /* SYSCONF: clock 512, mpu401, 1xADC, 1xDACs */ + 0x80, /* ACLINK: I2S */ + 0xf8, /* I2S: vol, 96k, 24bit, 192k */ + 0xc3, /* SPDIF: out-en, out-int, spdif-in */ + 0x9f, /* GPIO_DIR */ + 0xff, /* GPIO_DIR1 */ + 0x7f, /* GPIO_DIR2 */ + 0x9f, /* GPIO_MASK */ + 0xff, /* GPIO_MASK1 */ + 0x7f, /* GPIO_MASK2 */ + 0x16, /* GPIO_STATE: internal clock, multiple 1x, 48kHz */ + 0x80, /* GPIO_STATE1: mute */ + 0x00, /* GPIO_STATE2 */ +}; + +/* entry point */ +struct snd_ice1712_card_info snd_vt1724_juli_cards[] __devinitdata = { + { + .subvendor = VT1724_SUBDEVICE_JULI, + .name = "ESI Juli@", + .model = "juli", + .chip_init = juli_init, + .build_controls = juli_add_controls, + .eeprom_size = sizeof(juli_eeprom), + .eeprom_data = juli_eeprom, + }, + { } /* terminator */ +}; |