diff options
Diffstat (limited to 'sound/soc/codecs/wm8903.c')
| -rw-r--r-- | sound/soc/codecs/wm8903.c | 119 |
1 files changed, 78 insertions, 41 deletions
diff --git a/sound/soc/codecs/wm8903.c b/sound/soc/codecs/wm8903.c index 8cf571f1a803..d8a9222fbf74 100644 --- a/sound/soc/codecs/wm8903.c +++ b/sound/soc/codecs/wm8903.c @@ -217,7 +217,6 @@ struct wm8903_priv { int sysclk; /* Reference counts */ - int charge_pump_users; int class_w_users; int playback_active; int capture_active; @@ -373,6 +372,15 @@ static void wm8903_reset(struct snd_soc_codec *codec) #define WM8903_OUTPUT_INT 0x2 #define WM8903_OUTPUT_IN 0x1 +static int wm8903_cp_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + WARN_ON(event != SND_SOC_DAPM_POST_PMU); + mdelay(4); + + return 0; +} + /* * Event for headphone and line out amplifier power changes. Special * power up/down sequences are required in order to maximise pop/click @@ -382,19 +390,20 @@ static int wm8903_output_event(struct snd_soc_dapm_widget *w, struct snd_kcontrol *kcontrol, int event) { struct snd_soc_codec *codec = w->codec; - struct wm8903_priv *wm8903 = codec->private_data; - struct i2c_client *i2c = codec->control_data; u16 val; u16 reg; + u16 dcs_reg; + u16 dcs_bit; int shift; - u16 cp_reg = wm8903_read(codec, WM8903_CHARGE_PUMP_0); switch (w->reg) { case WM8903_POWER_MANAGEMENT_2: reg = WM8903_ANALOGUE_HP_0; + dcs_bit = 0 + w->shift; break; case WM8903_POWER_MANAGEMENT_3: reg = WM8903_ANALOGUE_LINEOUT_0; + dcs_bit = 2 + w->shift; break; default: BUG(); @@ -419,18 +428,6 @@ static int wm8903_output_event(struct snd_soc_dapm_widget *w, /* Short the output */ val &= ~(WM8903_OUTPUT_SHORT << shift); wm8903_write(codec, reg, val); - - wm8903->charge_pump_users++; - - dev_dbg(&i2c->dev, "Charge pump use count now %d\n", - wm8903->charge_pump_users); - - if (wm8903->charge_pump_users == 1) { - dev_dbg(&i2c->dev, "Enabling charge pump\n"); - wm8903_write(codec, WM8903_CHARGE_PUMP_0, - cp_reg | WM8903_CP_ENA); - mdelay(4); - } } if (event & SND_SOC_DAPM_POST_PMU) { @@ -446,6 +443,11 @@ static int wm8903_output_event(struct snd_soc_dapm_widget *w, val |= (WM8903_OUTPUT_OUT << shift); wm8903_write(codec, reg, val); + /* Enable the DC servo */ + dcs_reg = wm8903_read(codec, WM8903_DC_SERVO_0); + dcs_reg |= dcs_bit; + wm8903_write(codec, WM8903_DC_SERVO_0, dcs_reg); + /* Remove the short */ val |= (WM8903_OUTPUT_SHORT << shift); wm8903_write(codec, reg, val); @@ -458,25 +460,17 @@ static int wm8903_output_event(struct snd_soc_dapm_widget *w, val &= ~(WM8903_OUTPUT_SHORT << shift); wm8903_write(codec, reg, val); + /* Disable the DC servo */ + dcs_reg = wm8903_read(codec, WM8903_DC_SERVO_0); + dcs_reg &= ~dcs_bit; + wm8903_write(codec, WM8903_DC_SERVO_0, dcs_reg); + /* Then disable the intermediate and output stages */ val &= ~((WM8903_OUTPUT_OUT | WM8903_OUTPUT_INT | WM8903_OUTPUT_IN) << shift); wm8903_write(codec, reg, val); } - if (event & SND_SOC_DAPM_POST_PMD) { - wm8903->charge_pump_users--; - - dev_dbg(&i2c->dev, "Charge pump use count now %d\n", - wm8903->charge_pump_users); - - if (wm8903->charge_pump_users == 0) { - dev_dbg(&i2c->dev, "Disabling charge pump\n"); - wm8903_write(codec, WM8903_CHARGE_PUMP_0, - cp_reg & ~WM8903_CP_ENA); - } - } - return 0; } @@ -539,6 +533,7 @@ static int wm8903_class_w_put(struct snd_kcontrol *kcontrol, /* ALSA can only do steps of .01dB */ static const DECLARE_TLV_DB_SCALE(digital_tlv, -7200, 75, 1); +static const DECLARE_TLV_DB_SCALE(digital_sidetone_tlv, -3600, 300, 0); static const DECLARE_TLV_DB_SCALE(out_tlv, -5700, 100, 0); static const DECLARE_TLV_DB_SCALE(drc_tlv_thresh, 0, 75, 0); @@ -657,6 +652,16 @@ static const struct soc_enum rinput_inv_enum = SOC_ENUM_SINGLE(WM8903_ANALOGUE_RIGHT_INPUT_1, 4, 3, rinput_mux_text); +static const char *sidetone_text[] = { + "None", "Left", "Right" +}; + +static const struct soc_enum lsidetone_enum = + SOC_ENUM_SINGLE(WM8903_DAC_DIGITAL_0, 2, 3, sidetone_text); + +static const struct soc_enum rsidetone_enum = + SOC_ENUM_SINGLE(WM8903_DAC_DIGITAL_0, 0, 3, sidetone_text); + static const struct snd_kcontrol_new wm8903_snd_controls[] = { /* Input PGAs - No TLV since the scale depends on PGA mode */ @@ -700,6 +705,9 @@ SOC_DOUBLE_R_TLV("Digital Capture Volume", WM8903_ADC_DIGITAL_VOLUME_LEFT, SOC_ENUM("ADC Companding Mode", adc_companding), SOC_SINGLE("ADC Companding Switch", WM8903_AUDIO_INTERFACE_0, 3, 1, 0), +SOC_DOUBLE_TLV("Digital Sidetone Volume", WM8903_DAC_DIGITAL_0, 4, 8, + 12, 0, digital_sidetone_tlv), + /* DAC */ SOC_DOUBLE_R_TLV("Digital Playback Volume", WM8903_DAC_DIGITAL_VOLUME_LEFT, WM8903_DAC_DIGITAL_VOLUME_RIGHT, 1, 120, 0, digital_tlv), @@ -762,6 +770,12 @@ static const struct snd_kcontrol_new rinput_mux = static const struct snd_kcontrol_new rinput_inv_mux = SOC_DAPM_ENUM("Right Inverting Input Mux", rinput_inv_enum); +static const struct snd_kcontrol_new lsidetone_mux = + SOC_DAPM_ENUM("DACL Sidetone Mux", lsidetone_enum); + +static const struct snd_kcontrol_new rsidetone_mux = + SOC_DAPM_ENUM("DACR Sidetone Mux", rsidetone_enum); + static const struct snd_kcontrol_new left_output_mixer[] = { SOC_DAPM_SINGLE("DACL Switch", WM8903_ANALOGUE_LEFT_MIX_0, 3, 1, 0), SOC_DAPM_SINGLE("DACR Switch", WM8903_ANALOGUE_LEFT_MIX_0, 2, 1, 0), @@ -828,6 +842,9 @@ SND_SOC_DAPM_PGA("Right Input PGA", WM8903_POWER_MANAGEMENT_0, 0, 0, NULL, 0), SND_SOC_DAPM_ADC("ADCL", "Left HiFi Capture", WM8903_POWER_MANAGEMENT_6, 1, 0), SND_SOC_DAPM_ADC("ADCR", "Right HiFi Capture", WM8903_POWER_MANAGEMENT_6, 0, 0), +SND_SOC_DAPM_MUX("DACL Sidetone", SND_SOC_NOPM, 0, 0, &lsidetone_mux), +SND_SOC_DAPM_MUX("DACR Sidetone", SND_SOC_NOPM, 0, 0, &rsidetone_mux), + SND_SOC_DAPM_DAC("DACL", "Left Playback", WM8903_POWER_MANAGEMENT_6, 3, 0), SND_SOC_DAPM_DAC("DACR", "Right Playback", WM8903_POWER_MANAGEMENT_6, 2, 0), @@ -844,26 +861,29 @@ SND_SOC_DAPM_MIXER("Right Speaker Mixer", WM8903_POWER_MANAGEMENT_4, 0, 0, SND_SOC_DAPM_PGA_E("Left Headphone Output PGA", WM8903_POWER_MANAGEMENT_2, 1, 0, NULL, 0, wm8903_output_event, SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU | - SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMD), + SND_SOC_DAPM_PRE_PMD), SND_SOC_DAPM_PGA_E("Right Headphone Output PGA", WM8903_POWER_MANAGEMENT_2, 0, 0, NULL, 0, wm8903_output_event, SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU | - SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMD), + SND_SOC_DAPM_PRE_PMD), SND_SOC_DAPM_PGA_E("Left Line Output PGA", WM8903_POWER_MANAGEMENT_3, 1, 0, NULL, 0, wm8903_output_event, SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU | - SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMD), + SND_SOC_DAPM_PRE_PMD), SND_SOC_DAPM_PGA_E("Right Line Output PGA", WM8903_POWER_MANAGEMENT_3, 0, 0, NULL, 0, wm8903_output_event, SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU | - SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMD), + SND_SOC_DAPM_PRE_PMD), SND_SOC_DAPM_PGA("Left Speaker PGA", WM8903_POWER_MANAGEMENT_5, 1, 0, NULL, 0), SND_SOC_DAPM_PGA("Right Speaker PGA", WM8903_POWER_MANAGEMENT_5, 0, 0, NULL, 0), +SND_SOC_DAPM_SUPPLY("Charge Pump", WM8903_CHARGE_PUMP_0, 0, 0, + wm8903_cp_event, SND_SOC_DAPM_POST_PMU), +SND_SOC_DAPM_SUPPLY("CLK_DSP", WM8903_CLOCK_RATES_2, 1, 0, NULL, 0), }; static const struct snd_soc_dapm_route intercon[] = { @@ -909,7 +929,19 @@ static const struct snd_soc_dapm_route intercon[] = { { "Right Input PGA", NULL, "Right Input Mode Mux" }, { "ADCL", NULL, "Left Input PGA" }, + { "ADCL", NULL, "CLK_DSP" }, { "ADCR", NULL, "Right Input PGA" }, + { "ADCR", NULL, "CLK_DSP" }, + + { "DACL Sidetone", "Left", "ADCL" }, + { "DACL Sidetone", "Right", "ADCR" }, + { "DACR Sidetone", "Left", "ADCL" }, + { "DACR Sidetone", "Right", "ADCR" }, + + { "DACL", NULL, "DACL Sidetone" }, + { "DACL", NULL, "CLK_DSP" }, + { "DACR", NULL, "DACR Sidetone" }, + { "DACR", NULL, "CLK_DSP" }, { "Left Output Mixer", "Left Bypass Switch", "Left Input PGA" }, { "Left Output Mixer", "Right Bypass Switch", "Right Input PGA" }, @@ -951,6 +983,11 @@ static const struct snd_soc_dapm_route intercon[] = { { "ROP", NULL, "Right Speaker PGA" }, { "RON", NULL, "Right Speaker PGA" }, + + { "Left Headphone Output PGA", NULL, "Charge Pump" }, + { "Right Headphone Output PGA", NULL, "Charge Pump" }, + { "Left Line Output PGA", NULL, "Charge Pump" }, + { "Right Line Output PGA", NULL, "Charge Pump" }, }; static int wm8903_add_widgets(struct snd_soc_codec *codec) @@ -985,6 +1022,11 @@ static int wm8903_set_bias_level(struct snd_soc_codec *codec, wm8903_write(codec, WM8903_CLOCK_RATES_2, WM8903_CLK_SYS_ENA); + /* Change DC servo dither level in startup sequence */ + wm8903_write(codec, WM8903_WRITE_SEQUENCER_0, 0x11); + wm8903_write(codec, WM8903_WRITE_SEQUENCER_1, 0x1257); + wm8903_write(codec, WM8903_WRITE_SEQUENCER_2, 0x2); + wm8903_run_sequence(codec, 0); wm8903_sync_reg_cache(codec, codec->reg_cache); @@ -1277,14 +1319,8 @@ static int wm8903_startup(struct snd_pcm_substream *substream, if (wm8903->master_substream) { master_runtime = wm8903->master_substream->runtime; - dev_dbg(&i2c->dev, "Constraining to %d bits at %dHz\n", - master_runtime->sample_bits, - master_runtime->rate); - - snd_pcm_hw_constraint_minmax(substream->runtime, - SNDRV_PCM_HW_PARAM_RATE, - master_runtime->rate, - master_runtime->rate); + dev_dbg(&i2c->dev, "Constraining to %d bits\n", + master_runtime->sample_bits); snd_pcm_hw_constraint_minmax(substream->runtime, SNDRV_PCM_HW_PARAM_SAMPLE_BITS, @@ -1523,6 +1559,7 @@ struct snd_soc_dai wm8903_dai = { .formats = WM8903_FORMATS, }, .ops = &wm8903_dai_ops, + .symmetric_rates = 1, }; EXPORT_SYMBOL_GPL(wm8903_dai); |