diff options
Diffstat (limited to 'sound/soc/codecs/wm8983.c')
| -rw-r--r-- | sound/soc/codecs/wm8983.c | 45 |
1 files changed, 20 insertions, 25 deletions
diff --git a/sound/soc/codecs/wm8983.c b/sound/soc/codecs/wm8983.c index aa41ba0dfff4..58f0551eed2d 100644 --- a/sound/soc/codecs/wm8983.c +++ b/sound/soc/codecs/wm8983.c @@ -205,49 +205,44 @@ static const DECLARE_TLV_DB_SCALE(bypass_tlv, -1500, 300, 0); static const DECLARE_TLV_DB_SCALE(pga_boost_tlv, 0, 2000, 0); static const char *alc_sel_text[] = { "Off", "Right", "Left", "Stereo" }; -static const SOC_ENUM_SINGLE_DECL(alc_sel, WM8983_ALC_CONTROL_1, 7, - alc_sel_text); +static SOC_ENUM_SINGLE_DECL(alc_sel, WM8983_ALC_CONTROL_1, 7, alc_sel_text); static const char *alc_mode_text[] = { "ALC", "Limiter" }; -static const SOC_ENUM_SINGLE_DECL(alc_mode, WM8983_ALC_CONTROL_3, 8, - alc_mode_text); +static SOC_ENUM_SINGLE_DECL(alc_mode, WM8983_ALC_CONTROL_3, 8, alc_mode_text); static const char *filter_mode_text[] = { "Audio", "Application" }; -static const SOC_ENUM_SINGLE_DECL(filter_mode, WM8983_ADC_CONTROL, 7, - filter_mode_text); +static SOC_ENUM_SINGLE_DECL(filter_mode, WM8983_ADC_CONTROL, 7, + filter_mode_text); static const char *eq_bw_text[] = { "Narrow", "Wide" }; static const char *eqmode_text[] = { "Capture", "Playback" }; -static const SOC_ENUM_SINGLE_EXT_DECL(eqmode, eqmode_text); +static SOC_ENUM_SINGLE_EXT_DECL(eqmode, eqmode_text); static const char *eq1_cutoff_text[] = { "80Hz", "105Hz", "135Hz", "175Hz" }; -static const SOC_ENUM_SINGLE_DECL(eq1_cutoff, WM8983_EQ1_LOW_SHELF, 5, - eq1_cutoff_text); +static SOC_ENUM_SINGLE_DECL(eq1_cutoff, WM8983_EQ1_LOW_SHELF, 5, + eq1_cutoff_text); static const char *eq2_cutoff_text[] = { "230Hz", "300Hz", "385Hz", "500Hz" }; -static const SOC_ENUM_SINGLE_DECL(eq2_bw, WM8983_EQ2_PEAK_1, 8, eq_bw_text); -static const SOC_ENUM_SINGLE_DECL(eq2_cutoff, WM8983_EQ2_PEAK_1, 5, - eq2_cutoff_text); +static SOC_ENUM_SINGLE_DECL(eq2_bw, WM8983_EQ2_PEAK_1, 8, eq_bw_text); +static SOC_ENUM_SINGLE_DECL(eq2_cutoff, WM8983_EQ2_PEAK_1, 5, eq2_cutoff_text); static const char *eq3_cutoff_text[] = { "650Hz", "850Hz", "1.1kHz", "1.4kHz" }; -static const SOC_ENUM_SINGLE_DECL(eq3_bw, WM8983_EQ3_PEAK_2, 8, eq_bw_text); -static const SOC_ENUM_SINGLE_DECL(eq3_cutoff, WM8983_EQ3_PEAK_2, 5, - eq3_cutoff_text); +static SOC_ENUM_SINGLE_DECL(eq3_bw, WM8983_EQ3_PEAK_2, 8, eq_bw_text); +static SOC_ENUM_SINGLE_DECL(eq3_cutoff, WM8983_EQ3_PEAK_2, 5, eq3_cutoff_text); static const char *eq4_cutoff_text[] = { "1.8kHz", "2.4kHz", "3.2kHz", "4.1kHz" }; -static const SOC_ENUM_SINGLE_DECL(eq4_bw, WM8983_EQ4_PEAK_3, 8, eq_bw_text); -static const SOC_ENUM_SINGLE_DECL(eq4_cutoff, WM8983_EQ4_PEAK_3, 5, - eq4_cutoff_text); +static SOC_ENUM_SINGLE_DECL(eq4_bw, WM8983_EQ4_PEAK_3, 8, eq_bw_text); +static SOC_ENUM_SINGLE_DECL(eq4_cutoff, WM8983_EQ4_PEAK_3, 5, eq4_cutoff_text); static const char *eq5_cutoff_text[] = { "5.3kHz", "6.9kHz", "9kHz", "11.7kHz" }; -static const SOC_ENUM_SINGLE_DECL(eq5_cutoff, WM8983_EQ5_HIGH_SHELF, 5, - eq5_cutoff_text); +static SOC_ENUM_SINGLE_DECL(eq5_cutoff, WM8983_EQ5_HIGH_SHELF, 5, + eq5_cutoff_text); static const char *depth_3d_text[] = { "Off", @@ -267,8 +262,8 @@ static const char *depth_3d_text[] = { "93.3%", "100%" }; -static const SOC_ENUM_SINGLE_DECL(depth_3d, WM8983_3D_CONTROL, 0, - depth_3d_text); +static SOC_ENUM_SINGLE_DECL(depth_3d, WM8983_3D_CONTROL, 0, + depth_3d_text); static const struct snd_kcontrol_new wm8983_snd_controls[] = { SOC_SINGLE("Digital Loopback Switch", WM8983_COMPANDING_CONTROL, @@ -1129,7 +1124,7 @@ static struct spi_driver wm8983_spi_driver = { }; #endif -#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) +#if IS_ENABLED(CONFIG_I2C) static int wm8983_i2c_probe(struct i2c_client *i2c, const struct i2c_device_id *id) { @@ -1182,7 +1177,7 @@ static int __init wm8983_modinit(void) { int ret = 0; -#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) +#if IS_ENABLED(CONFIG_I2C) ret = i2c_add_driver(&wm8983_i2c_driver); if (ret) { printk(KERN_ERR "Failed to register wm8983 I2C driver: %d\n", @@ -1202,7 +1197,7 @@ module_init(wm8983_modinit); static void __exit wm8983_exit(void) { -#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) +#if IS_ENABLED(CONFIG_I2C) i2c_del_driver(&wm8983_i2c_driver); #endif #if defined(CONFIG_SPI_MASTER) |